model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
107064 | v2022 - Grajohnt's 2022 Shutter Shades | <p>This year's shutter shades re-design!</p><p>Snap-on temples and an easy-to-print design - let's goooo 2022!</p><p>HT to original design by @drjames: https://www.thingiverse.com/thing:1603773</p><p>Category: Glasses</p> | [
"fashion",
"newyear",
"dht22",
"thingiverse",
"newyears",
"shuttershades",
"nye",
"2022",
"newyear2022"
] | Fashion > Other Fashion Accessories | [
"107064/images/image_1_compressed.jpg",
"107064/images/image_2_compressed.jpg",
"107064/images/image_3_compressed.jpg",
"107064/images/image_4_compressed.jpg",
"107064/images/image_5_compressed.jpg",
"107064/images/image_6_compressed.jpg"
] | [
"107064/stls/2022_Glasses_Frame_107064.stl",
"107064/stls/2022_Shutter_Shades_x3.stl"
] | CC-BY | https://www.printables.com/model/107064 | data_0037.tar |
335240 | v29 Whistle with Flat or Chamfered Base | <p>I tried to print the original model multiple times but it either failed due to curling and getting knocked off the bed, or ended up looking terrible because of the curling, which is not uncommon for models with a fillet rather than a chamfer on the bottom face. So, I projected the shape and extruded the base complet... | [] | Gadgets > Audio | [
"335240/images/image_1_compressed.jpg",
"335240/images/image_2_compressed.jpg"
] | [
"335240/stls/V29-Whistle_Chamfer.stl",
"335240/stls/V29-Whistle_Flat.stl"
] | CC-BY | https://www.printables.com/model/335240 | data_0037.tar |
112845 | V3 Lack Drawers | V3 Lack drawers.
Original Design by: https://www.instagram.com/solidworksmaker | Download free 3D printable STL models | [
"ikealack",
"drawers",
"organization"
] | 3D Printers > Accessories | [
"112845/images/image_1_compressed.jpg",
"112845/images/image_2_compressed.jpg"
] | [
"112845/stls/Drawer 1.stl",
"112845/stls/Drawer 2.stl",
"112845/stls/Drawer 5.stl",
"112845/stls/Drawer 6.stl",
"112845/stls/Labels.stl",
"112845/stls/Support 0 Set.stl",
"112845/stls/Support 1&5.stl",
"112845/stls/Support 4&6.stl",
"112845/stls/Support Steel Sheet C&D.stl"
] | GPL3.0 | https://www.printables.com/model/112845 | data_0037.tar |
449317 | V3.1 Gridfinity Big/Small Parts Project Tray W/ 1x1 Screw Bin, 63 Slot Grid Magnet Tray & Stackable Lid | <p>UPDATE Version 3.1: updated the fillet on the inside of the small squares to make grabbing screws easier.</p><p>Version 3.0: I have included 2 models that use a 63 slot grid for ultra small magnets. One of the 2x2 trays has the grid embedded if you don't want to use a flexible magnet., the small screws are sti... | [
"holder",
"container",
"small",
"lid",
"part",
"enclosure",
"storage",
"electronics",
"screw",
"repair",
"sorting",
"bin",
"grid",
"divider",
"gridfinity"
] | Hobby & Makers > Organizers | [
"449317/images/image_1_compressed.jpg",
"449317/images/image_10_compressed.jpg",
"449317/images/image_11_compressed.jpg",
"449317/images/image_12_compressed.jpg",
"449317/images/image_2_compressed.jpg",
"449317/images/image_3_compressed.jpg",
"449317/images/image_4_compressed.jpg",
"449317/images/imag... | [
"449317/stls/Gridfinity 1x1 Lid.stl",
"449317/stls/Gridfinity 5 slot screw bin w big hole 1x1x2.stl",
"449317/stls/Gridfinity9 slot screw bin 1x1x2.stl",
"449317/stls/screw bin grid insert.stl",
"449317/stls/v2 Gridfinity 5 slot screw bin w big hole 1x1x2.stl",
"449317/stls/v2 Gridfinity9 slot screw bin 1... | CC-BY | https://www.printables.com/model/449317 | data_0037.tar |
60963 | v30 (v29) Whistle - Compact Edition | <p>This is a redesign of Goury's v30 whistle (thing:2783665) which was itself inspired by jzisa's v29 whistle (thing:1179160).</p><p>After printing the v30, I realised that a big portion of the internal volume did not have any sound-making function - it seemed to be there for aesthetics and to put the keyring hole. It ... | [
"whistle",
"thingiverse"
] | Sports & Outdoor > Outdoor Sports | [
"60963/images/image_1_compressed.jpg",
"60963/images/image_2_compressed.jpg",
"60963/images/image_3_compressed.jpg",
"60963/images/image_4_compressed.jpg"
] | [
"60963/stls/V30_compact_whistle_LMF.stl",
"60963/stls/V30_compact_whistle_unbranded.stl"
] | GPL3.0 | https://www.printables.com/model/60963 | data_0037.tar |
5338 | V30 whistle | <p>Do not ever use it indoors without hearing protection.<br>You will damage your ears, with a chance for permanent.</p> | [] | Gadgets > Audio | [
"5338/images/image_1_compressed.jpg"
] | [
"5338/stls/the-whistle-v301.stl",
"5338/stls/the-whistle-v301slim.stl",
"5338/stls/the-whistle-v301slimshort.stl"
] | GPL3.0 | https://www.printables.com/model/5338 | data_0037.tar |
454394 | v30 whistle - needs a lot less breath! | <p>The V30 is designed to need a lot less breath to be super loud. The tone is more precise, cleaner, but still easy to print.</p><p>Be carefull, this whistle is really loud at low air flow!</p><p> </p><p>Links to the Thingiverse files:</p><p>V29: <a href="https://www.thingiverse.com/thing:1179160">https://www.thi... | [
"toy",
"whistle",
"toys",
"breath",
"remix",
"whistles",
"loud",
"less",
"loudest",
"whistlesiren",
"db",
"pfeife",
"118",
"v30",
"v29",
"118db",
"v29whistle",
"pfeifen",
"v30whistle"
] | Toys & Games > Other Toys & Games | [
"454394/images/image_1_compressed.jpg",
"454394/images/image_2_compressed.jpg",
"454394/images/image_3_compressed.jpg",
"454394/images/image_4_compressed.jpg"
] | [
"454394/stls/The_unbranded_whistle.stl",
"454394/stls/The_whistle.stl"
] | GPL3.0 | https://www.printables.com/model/454394 | data_0037.tar |
1133951 | V4 Toolhead - Ideal for MMU for SV08 and any Voron Gantries | <figure class="table"><table><tbody><tr><td style="background-color:#40C8E8;border-color:#000000;border-style:double;text-align:center;"><strong>I have added the Extruder Main body and the Blade holder for KB4-F_5 Blade</strong><br><strong>We highly recommend this Blade since is more reliable/ durable/ thick and it sha... | [
"3dprinter",
"3dprinted",
"trident",
"gantry",
"voron",
"sovol",
"toolhead",
"24",
"toolboard",
"cn3d",
"sv08"
] | 3D Printers > Voron Parts & Upgrades | [
"1133951/images/image_1_compressed.jpg",
"1133951/images/image_10_compressed.jpg",
"1133951/images/image_11_compressed.jpg",
"1133951/images/image_12_compressed.jpg",
"1133951/images/image_13_compressed.jpg",
"1133951/images/image_14_compressed.jpg",
"1133951/images/image_15_compressed.jpg",
"1133951/... | [
"1133951/stls/beacon x carriage.stl",
"1133951/stls/blade holder for V4 KB4-F_5 Blade.stl",
"1133951/stls/blade holder.stl",
"1133951/stls/cn3d t volcano holder.stl",
"1133951/stls/eddy cover.stl",
"1133951/stls/eddy probe holder.stl",
"1133951/stls/Eddy Probe X carriage.stl",
"1133951/stls/extruder ... | GPL3.0 | https://www.printables.com/model/1133951 | data_0037.tar |
346753 | V400 spool holder upgrade | <p>Here is a little upgrade I designed for my Flsun V400.<br>The original metal spool holder is a little bit rough. It works well but make noise when the spool is unrolling.</p><p>This piece is easy to print with so support, It fits perfectly on the original spool holder and clips in place tight.<br><br>This is a simpl... | [
"upgrade",
"spool",
"flsun",
"v400"
] | 3D Printers > Other Printer Parts & Upgrades | [
"346753/images/image_1_compressed.jpg",
"346753/images/image_2_compressed.jpg",
"346753/images/image_3_compressed.jpg"
] | [
"346753/stls/v400 spool holder upgrade.stl"
] | CC-BY | https://www.printables.com/model/346753 | data_0037.tar |
1283204 | V5 Toolhead for SV08 & Voron – Orbiter V2/2.5 Upgrade | <figure class="table" style="height:83.7812px;width:714px;"><table style="border:4px solid #40C8E8;"><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"><strong>Perfect for SV08, Voron, and Voron-style gantry users looking to upgrade to a lighter, more efficient, MMU-ready toolhead.</strong><br>Th... | [
"extruder",
"gears",
"opensource",
"planetary",
"trident",
"voron",
"sovol",
"btt",
"ldo",
"toolhead",
"ebb",
"orbiter",
"24",
"orbiter2",
"ebb42",
"ebb36",
"orbiter20",
"cn3d",
"sovolsv08",
"orbiter25",
"sc08"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1283204/images/image_1_compressed.jpg",
"1283204/images/image_10_compressed.jpg",
"1283204/images/image_11_compressed.jpg",
"1283204/images/image_12_compressed.jpg",
"1283204/images/image_13_compressed.jpg",
"1283204/images/image_14_compressed.jpg",
"1283204/images/image_15_compressed.jpg",
"1283204/... | [
"1283204/stls/4in1 hub with encoder body.stl",
"1283204/stls/4in1 hub with encoder cap.stl",
"1283204/stls/4in1 hub with encoder.stl",
"1283204/stls/Belt Clips.stl",
"1283204/stls/ebb 42 holder.stl",
"1283204/stls/encoder gear.stl",
"1283204/stls/extrude main body for ebb 42.stl",
"1283204/stls/extrud... | GPL3.0 | https://www.printables.com/model/1283204 | data_0037.tar |
44066 | V6 Nozzle Box | <p><strong>UPDATED May-23: New sturdier hinge design. Details below.</strong></p><p>I didn't really like any of the boxes or nozzle holders I found. I wanted something minimal, quick to print and tidy.</p><p>This little box packs up to 15 nozzles closely together, prints in place with a hinge and a pressure clasp to st... | [
"box",
"hinge",
"printinplace",
"nozzleholder",
"thingiverse"
] | 3D Printers > Accessories | [
"44066/images/image_1_compressed.jpg",
"44066/images/image_2_compressed.jpg",
"44066/images/image_3_compressed.jpg",
"44066/images/image_4_compressed.jpg",
"44066/images/image_5_compressed.jpg",
"44066/images/image_6_compressed.jpg"
] | [
"44066/stls/nozzle boxv2_0.26t.stl",
"44066/stls/nozzle boxv2_0.2t.stl",
"44066/stls/nozzlebox02t.stl",
"44066/stls/nozzlebox03t.stl"
] | CC-BY | https://www.printables.com/model/44066 | data_0037.tar |
142158 | V60 Coffee Filter Holder |
<p>This is a holder/stand for v60 coffee filters. This is the first thing I've designed/modeled/printed. If I were to print another, I'd make it about 1-2mm longer. The filters I use are about 133mm long</p>
<h3>Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>Voxelab Aquila</p>
<p class="detail-setting rafts... | [
"coffee",
"thingiverse"
] | Household > Kitchen | [
"142158/images/image_1_compressed.jpg",
"142158/images/image_2_compressed.jpg"
] | [
"142158/stls/coffee_filter_holder.stl"
] | CC-BY | https://www.printables.com/model/142158 | data_0037.tar |
658751 | v60 Paper filter Size 02 Holder | <p>A simple but elegant v60 paper filter holder for 100 size 02 Filters. I've included the signature emboss on the paper filter into the design. Looks great, good tolerances and fits the purpose.</p><p> </p> | [
"filter",
"paper",
"switch",
"coffee",
"hario",
"v60",
"hariov60",
"filtercoffee"
] | Household > Kitchen | [
"658751/images/image_1_compressed.jpg",
"658751/images/image_2_compressed.jpg",
"658751/images/image_3_compressed.jpg",
"658751/images/image_4_compressed.jpg",
"658751/images/image_5_compressed.jpg"
] | [
"658751/stls/v60 Paper filter Size 02 Holder.stl"
] | CC-BY | https://www.printables.com/model/658751 | data_0037.tar |
365376 | V8 Business Card Holder / Visitenkartenhalter | <p>Here we have a remix of zykovkristian's model of a V8 Business Card holder. I made some changes to make it easier to print (crankshaft alley removed, oil pan bores removed, crankshaft bores reduced, details in the head minimized, map slot deepened). Now it's much easier to print with almost the same look. Thanks to ... | [
"holder",
"businesscards",
"businesscard",
"businesscardholder",
"cardholder",
"businesscardholders",
"businesscardstand",
"businesscarddispenser",
"businesscardcase",
"businesscardbox"
] | Household > Office | [
"365376/images/image_1_compressed.jpg",
"365376/images/image_2_compressed.jpg",
"365376/images/image_3_compressed.jpg"
] | [
"365376/stls/V8BuisnessCard v1.stl"
] | CC-BY | https://www.printables.com/model/365376 | data_0037.tar |
789056 | V8 Engine Block Name Card and Pen Holder | <p>A V8 engine block with a top part suitable for holding your business/name card. </p><p>Test prints were made on a Prusa i3 MK3S and an Anycubic Kobra 2 from PLA with 0.2 mm layer height, 5 % infill density, 190 °C nozzle temperature and 65 °C bed temperature. Organic supports with an overhang threshold of 37 ° ... | [
"engineering",
"engine",
"penholder",
"automotive",
"automotiveparts",
"namecard"
] | Learning > Engineering | [
"789056/images/image_1_compressed.jpg",
"789056/images/image_2_compressed.jpg",
"789056/images/image_3_compressed.jpg",
"789056/images/image_4_compressed.jpg",
"789056/images/image_5_compressed.jpg"
] | [
"789056/stls/V8 Block v2 anycubic Kobra2.stl",
"789056/stls/V8 Block v2 Bambu P1S.stl",
"789056/stls/V8 Block v2 Prusa i3 MK3S.stl",
"789056/stls/V8 Block v2.stl"
] | CC-BY | https://www.printables.com/model/789056 | data_0037.tar |
1494957 | V8 Engine Model | Functional Pistons, Valves & Timing Chain | <p>This project is a <strong>fully functional V8 engine model</strong> designed for 3D printing. It features:</p><ul><li><p><strong>Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-8-4-3-6-5-7-2,</strong></p></li><li><p><strong>Fully printable timing chain,</strong></p></l... | [
"functional",
"motor",
"assembly",
"chain",
"car",
"mechanical",
"movingparts",
"model",
"engineering",
"power",
"engine",
"muscle",
"piston",
"printable",
"block",
"automotive",
"dcmotor",
"timing",
"engineer",
"v8engine",
"v8",
"camshaft"
] | Learning > Engineering | [
"1494957/images/image_1_compressed.jpg",
"1494957/images/image_2_compressed.jpg",
"1494957/images/image_3_compressed.jpg",
"1494957/images/image_4_compressed.jpg",
"1494957/images/image_5_compressed.jpg",
"1494957/images/image_6_compressed.jpg",
"1494957/images/image_7_compressed.jpg",
"1494957/images... | [
"1494957/stls/V8_all_parts.stl",
"1494957/stls/V8_Assembly.stl"
] | CC-BY | https://www.printables.com/model/1494957 | data_0037.tar |
363463 | V8 Visitenkartenhalter / Business Cardholder | V8 Visitenkartenhalter / Business Cardholder | Download free 3D printable STL models | [] | Household > Office | [
"363463/images/image_1_compressed.jpg",
"363463/images/image_2_compressed.jpg",
"363463/images/image_3_compressed.jpg",
"363463/images/image_4_compressed.jpg"
] | [
"363463/stls/AMG BCH.stl",
"363463/stls/V8 BCH.stl",
"363463/stls/V8 Ford Mustang BCH.stl"
] | CC-BY | https://www.printables.com/model/363463 | data_0037.tar |
67196 | vaccination certificate case | <p>This is a Case for vaccination certificates in europe.</p><p>This is print in place.</p><p>Tip: put a Logo or a Label on the case with PrusaSlicer using modifiers ;-)<br>Edit: I added another version to fit the older certificates, as requested in a comment</p> | [] | Healthcare > Home Medical Tools | [
"67196/images/image_1_compressed.jpg",
"67196/images/image_2_compressed.jpg"
] | [
"67196/stls/Impfpass.stl",
"67196/stls/Vaccination_Case_older_certificates.stl"
] | CC0 | https://www.printables.com/model/67196 | data_0037.tar |
67610 | Vaccination Multipass Holder | <p>This is a remix of the wonderful Convention badge holder by Jurgizmo that I definitely recommend you check out! - <a href="https://www.thingiverse.com/thing:491108">https://www.thingiverse.com/thing:491108</a></p><p>I took the design and made some adjustments to the geometry and finish to allow for a standard US CDC... | [
"holder",
"multipass",
"element",
"cosplayaccessory",
"5th",
"vaccination"
] | Fashion > Other Fashion Accessories | [
"67610/images/image_1_compressed.jpg",
"67610/images/image_2_compressed.jpg",
"67610/images/image_3_compressed.jpg",
"67610/images/image_4_compressed.jpg"
] | [
"67610/stls/Covid_Multipass_Remix_v3_New_15-04-2021.stl",
"67610/stls/mpass_stopper v3.stl"
] | CC0 | https://www.printables.com/model/67610 | data_0037.tar |
1359212 | Vaccum Bag Air Disc | And another air disc so that the vacuum bag can be pumped empty more quickly. | Download free 3D printable STL models | [] | 3D Printers > Accessories | [
"1359212/images/image_1_compressed.jpg",
"1359212/images/image_2_compressed.jpg",
"1359212/images/image_3_compressed.jpg",
"1359212/images/image_4_compressed.jpg"
] | [
"1359212/stls/vaccum_bag_air_disc.stl"
] | CC0 | https://www.printables.com/model/1359212 | data_0037.tar |
1191867 | Vacuum attachments | Attachments for the 31,5 mm and 38,5 mm tubes of vacuum cleaner (small cone for installation).
Support not needed. | Download free 3D printable STL models | [
"vacuum",
"attachment",
"vacuumcleaner",
"vacuumhose"
] | Household > Other House Equipment | [
"1191867/images/image_1_compressed.jpg",
"1191867/images/image_2_compressed.jpg"
] | [
"1191867/stls/vacuum 31_5.stl",
"1191867/stls/vacuum 38_5.stl"
] | CC-BY | https://www.printables.com/model/1191867 | data_0037.tar |
483623 | Vacuum Bag Sealing Clip | <p>This is the sealing clip that comes with most of the filament vacuum bags. It's annoying that most sellers only include 2, so I made this and printed a bunch more so each bag has its own clip and I don't have to go searching for one. </p><p>gcode is provided for one clip, but I'd recommend using the stl a... | [
"clip",
"filamentclip",
"vacuumbag",
"sealingclip"
] | 3D Printers > Accessories | [
"483623/images/image_1_compressed.jpg",
"483623/images/image_2_compressed.jpg",
"483623/images/image_3_compressed.jpg"
] | [
"483623/stls/SEALING CLIP_VACUUM BAG_V1_001.stl"
] | CC-BY | https://www.printables.com/model/483623 | data_0037.tar |
1291954 | Vacuum bag valve spacer | <p>Plastic bags with a vacuum valve are very helpful for storing filaments in a dry condition. Pressing the pump onto the valve during vacuuming is unavoidable, but closes the airway. To make this process easier, I have designed this little helper. The disc keeps a passage free to pump the bags empty. With some double-... | [
"bag",
"filament",
"valve",
"spacer",
"vacuum",
"pump",
"helper",
"vacuumpump",
"vacuumbag",
"drybag",
"vaccumbag",
"pumping",
"valvedisc",
"pumphilfe"
] | Hobby & Makers > Tools | [
"1291954/images/image_1_compressed.jpg",
"1291954/images/image_2_compressed.jpg",
"1291954/images/image_3_compressed.jpg",
"1291954/images/image_4_compressed.jpg",
"1291954/images/image_5_compressed.jpg"
] | [
"1291954/stls/Filament-Vacuumbag-Valve-Helper 2 v2.stl",
"1291954/stls/Filament-Vacuumbag-Valve-Helper 3 (40 mm) v1.stl",
"1291954/stls/Vacuum-Bag-Valve-Spacer.stl",
"1291954/stls/Vacuum-Bag-Valve-Spacer_30x.Prusa.stl"
] | CC0 | https://www.printables.com/model/1291954 | data_0037.tar |
273575 | Vacuum cleaner crevice nozzle d35mm (extension possible) | <p>Crevice tool for vacuum cleaners with tube diameter d35 mm (tested on Thomson).</p><p>Possible extension from 120 mm nozzle up to 280 mm.</p><p> </p><p>Printed with Pusament PETG. Layer height 0.3 mm should be enough since its not a mechanicaly exposed part and there is no requirement for smooth surface.</p><p>... | [
"tool",
"nozzle",
"cleaning",
"vacuum",
"extension",
"cleaner",
"crevice",
"vacuumcleaner",
"lux",
"35",
"thomson"
] | Household > Other House Equipment | [
"273575/images/image_1_compressed.jpg",
"273575/images/image_2_compressed.jpg",
"273575/images/image_3_compressed.jpg"
] | [
"273575/stls/vacuum cleaner slotted nozzle extend.stl",
"273575/stls/vacuum cleaner slotted nozzle.stl"
] | CC-BY | https://www.printables.com/model/273575 | data_0037.tar |
81031 | Vacuum cleaner nozzle - Staubsaugerdüse - MIELE |
<p>Vacuum cleaner nozzle for Miele.</p>
<p>I built this as an additional nozzle because the original is too short and too thick for cleaning the car between the seats.</p>
Category: Replacement Parts
| [
"thingiverse",
"vacuumcleaner",
"miele",
"carcleaning",
"mielestaubsauger"
] | Household > Other House Equipment | [
"81031/images/image_1_compressed.jpg",
"81031/images/image_2_compressed.jpg",
"81031/images/image_3_compressed.jpg"
] | [
"81031/stls/Staubsaugerduese.stl"
] | CC-BY | https://www.printables.com/model/81031 | data_0037.tar |
220338 | Vacuum Extensions Holder for Bosch GAS 18V-1 | <p>Wall-mounted holder for two extensions tubes and two accessories for the Bosch GAS 18V-1 vacuum.</p><p>The holder has four mounting clamps that let the accessories snap into place. The left clamp has an inner diameter of 40mm, the two clamps in the middle have an inner diameter of 33.2mm while the right clamp has an... | [
"holder",
"bosch",
"vacuum",
"vacuumaccessories",
"bosch18v"
] | Household > Other House Equipment | [
"220338/images/image_1_compressed.jpg",
"220338/images/image_2_compressed.jpg",
"220338/images/image_3_compressed.jpg",
"220338/images/image_4_compressed.jpg"
] | [
"220338/stls/vacuum_extensions_holder_v4.stl"
] | CC-BY | https://www.printables.com/model/220338 | data_0037.tar |
82530 | Vacuum head for MFT and Festool 27mm CLEANTEC hose | <p>Derived from <a href=" https://www.thingiverse.com/thing:4195749">Festool vacuum MFT hood</a> by <a href="https://www.thingiverse.com/ggragg">ggragg</a>, to vacuum while working on the bench.</p><p>Use a <a href="https://www.toolnut.com/insta-railsquare-track-saw-square-dog-set-for-festool-makita-rails-1.html">Insta... | [
"dustcollection",
"festool",
"mft3",
"benchdog",
"mft"
] | Hobby & Makers > Tools | [
"82530/images/image_1_compressed.jpg",
"82530/images/image_2_compressed.jpg"
] | [
"82530/stls/vaccum_mft.stl"
] | CC-BY | https://www.printables.com/model/82530 | data_0037.tar |
54898 | Vacuum hose hanger | <p>Hang the vacuum hose on wall.</p>
<h3>Print instructions</h3><p>Support on build plate only.</p> | [
"hanger",
"vacuumcleaner",
"vacuumhose"
] | Household > Other House Equipment | [
"54898/images/image_1_compressed.jpg",
"54898/images/image_2_compressed.jpg"
] | [
"54898/stls/hanger.stl"
] | CC-BY | https://www.printables.com/model/54898 | data_0037.tar |
783203 | Vacuum hose hanger, no supports. | <p>Quick and simple print to get your vacuum hose on the wall. It's made for hoses up to 50mm. Screw it to the wall or use self adhesive tape. No supports needed. </p> | [
"hanger",
"mount",
"wallmount",
"vacuum",
"hose",
"organize",
"vacuumhose"
] | Household > Other House Equipment | [
"783203/images/image_1_compressed.jpg",
"783203/images/image_2_compressed.jpg",
"783203/images/image_3_compressed.jpg",
"783203/images/image_4_compressed.jpg",
"783203/images/image_5_compressed.jpg"
] | [
"783203/stls/vacuum_hose_hanger.stl"
] | CC-BY | https://www.printables.com/model/783203 | data_0037.tar |
213558 | Vacuum hose holder (držák hadice) | <p>Simple vacuum cleaner hose holder. Hose diameter up to about 45 mm.</p><p>Needs to be printed on the side – that's why it has flat faces on both sides.</p> | [
"vysavac",
"hadice"
] | Household > Other House Equipment | [
"213558/images/image_1_compressed.jpg",
"213558/images/image_2_compressed.jpg"
] | [
"213558/stls/Hose_holder.stl"
] | CC-BY | https://www.printables.com/model/213558 | data_0037.tar |
137851 | Vacuum Spacer | <p>I figured out it really helped to keep my used rolls of filament in vacuum bags with desiccant.</p><p>Got an <a href="https://www.amazon.com/eSUN-Printing-Filament-Humidity-Resistant/dp/B08PKX4YLZ/ref=sr_1_3?crid=1LL8CQDS262O7&keywords=esun+vacuum&qid=1645545666&sprefix=esun+evacuum%2Caps%2C542&sr=8-... | [
"vacuum"
] | 3D Printers > Accessories | [
"137851/images/image_1_compressed.jpg",
"137851/images/image_2_compressed.jpg"
] | [
"137851/stls/Vacuum Spacer.stl"
] | CC0 | https://www.printables.com/model/137851 | data_0037.tar |
17625 | Vacuum Sucker for Drilling - Karcher Shop Vac 35 mm OD | <p>Thank you JonnieZG for sharing your "Vacuum Sucker for Drilling" (<a href="https://www.thingiverse.com/thing:2939576">https://www.thingiverse.com/thing:2939576</a>)! Great design since through the hole you still have full visibility on what you are doing, while in the same time through that hole air is sucked in, pi... | [
"vacuum",
"dustcollection",
"drilling",
"dustcollector",
"dril",
"karcher",
"sucker",
"vaccumcleaner",
"vaccumnozzle",
"vaccumadapter",
"vacuumnozzle",
"dustcatcher"
] | Hobby & Makers > Tools | [
"17625/images/image_1_compressed.jpg",
"17625/images/image_2_compressed.jpg",
"17625/images/image_3_compressed.jpg",
"17625/images/image_4_compressed.jpg",
"17625/images/image_5_compressed.jpg"
] | [
"17625/stls/vacuum_sucker_for_drilling_35_mm.stl"
] | CC-BY | https://www.printables.com/model/17625 | data_0037.tar |
754028 | Valentine Gnome - Love; decoration gift | <p>Valentine Gnome - Love; decoration gift; multi color; </p><p>key ring; key chain; necklace charms decoration</p><p>Optimal color setting is in the right side of the photo</p> | [
"decoration",
"multicolor",
"gift",
"keychain",
"keyring",
"valentine",
"valentinesday",
"valentinesdaygifts",
"keychains",
"iloveyou"
] | Art & Design > 2D Plates & Logos | [
"754028/images/image_1_compressed.jpg"
] | [
"754028/stls/Valentine Gnome 1.stl",
"754028/stls/Valentine Gnome V1 Black.stl",
"754028/stls/Valentine Gnome V1 Brown.stl",
"754028/stls/Valentine Gnome V1 Pink.stl",
"754028/stls/Valentine Gnome V1 Red.stl",
"754028/stls/Valentine Gnome V1 Skin.stl",
"754028/stls/Valentine Gnome V1 White.stl"
] | CC-BY | https://www.printables.com/model/754028 | data_0037.tar |
759918 | Valentine Heart Wreath/Wall Decoration | <p><strong>Notes: </strong></p><ul><li>Two available models one with text and one without</li><li>3MF files for each have built in color swaps</li><li>At current scale the text is fragile so be cautious when removing from bedsheet</li><li>Increase scale to help with stability and durability</li><li>Regular / Doubl... | [
"decoration",
"wall",
"decor",
"art",
"love",
"heart",
"contest",
"valentine",
"wreath",
"valentines"
] | Household > Other House Equipment | [
"759918/images/image_1_compressed.jpg",
"759918/images/image_2_compressed.jpg",
"759918/images/image_3_compressed.jpg"
] | [
"759918/stls/Wreath_No_Text.stl",
"759918/stls/Wreath_With_Text.stl"
] | CC-BY | https://www.printables.com/model/759918 | data_0037.tar |
753896 | Valentine Love Hearts Decoration | <p><i><strong>Beautiful decoration for your moments together :-)</strong></i></p><p><i><strong>You may also like the whole Valentine's Day collection </strong></i><a href="https://www.printables.com/@ArgiCZ/collections/1261473"><i><strong>here</strong></i></a><i><strong>.</strong></i></p> | [
"decoration",
"decor",
"gift",
"love",
"heart",
"valentine",
"valentinesday",
"decorative"
] | Household > Home Decor | [
"753896/images/image_1_compressed.jpg"
] | [
"753896/stls/Body1z.stl",
"753896/stls/Body2z.stl",
"753896/stls/Body3z.stl"
] | CC-BY | https://www.printables.com/model/753896 | data_0037.tar |
754869 | Valentine Roses For You | <p><i><strong>You may also like the whole Valentine's Day collection </strong></i><a href="https://www.printables.com/@ArgiCZ/collections/1261473"><i><strong>here</strong></i></a><i><strong>.</strong></i></p><p> </p><p><i><strong>Happy Valentine's Day and happy printing!</strong></i></p> | [
"decoration",
"flower",
"decor",
"art",
"birthday",
"gift",
"woman",
"rose",
"love",
"flowers",
"mother",
"valentine",
"valentinesday",
"mothersday",
"mom",
"valentinesdaygifts",
"girlfriend"
] | Art & Design > Other Art & Designs | [
"754869/images/image_1_compressed.jpg",
"754869/images/image_2_compressed.jpg",
"754869/images/image_3_compressed.jpg",
"754869/images/image_4_compressed.jpg"
] | [
"754869/stls/rfyf.stl",
"754869/stls/rfyr.stl",
"754869/stls/rfyy.stl"
] | CC-BY | https://www.printables.com/model/754869 | data_0037.tar |
744832 | Valentine Roses of Love | <p><i><strong>You may also like the whole Valentine's Day collection </strong></i><a href="https://www.printables.com/@ArgiCZ/collections/1261473"><i><strong>here</strong></i></a><i><strong>.</strong></i></p><p><i><strong>Happy Valentine's Day and happy printing!</strong></i></p> | [
"decoration",
"flower",
"decor",
"art",
"birthday",
"gift",
"woman",
"rose",
"love",
"flowers",
"mother",
"valentine",
"valentinesday",
"mothersday",
"mom",
"valentinesdaygifts",
"girlfriend"
] | Art & Design > Other Art & Designs | [
"744832/images/image_1_compressed.jpg"
] | [
"744832/stls/valentine rose 2.stl"
] | CC-BY | https://www.printables.com/model/744832 | data_0037.tar |
746244 | Valentine Tulips of Love | <p><i><strong>You may also like the whole Valentine's Day collection </strong></i><a href="https://www.printables.com/@ArgiCZ/collections/1261473"><i><strong>here</strong></i></a><i><strong>.</strong></i></p><p> </p><p><i><strong>Happy Valentine's Day and happy printing!</strong></i></p> | [
"decoration",
"flower",
"art",
"birthday",
"gift",
"woman",
"easter",
"love",
"flowers",
"mother",
"valentine",
"valentinesday",
"mothersday",
"mom",
"valentinesdaygifts",
"tulip",
"girlfriend"
] | Art & Design > Other Art & Designs | [
"746244/images/image_1_compressed.jpg"
] | [
"746244/stls/valentine tulips v5.stl"
] | CC-BY | https://www.printables.com/model/746244 | data_0037.tar |
760037 | Valentine's (Vorontine's) Day Gift Box | <p>This is a fun little print to celebrate Valentine's Day with us. Print it, fill with things which bring joy, and give it to your loved one. </p><p>Box consists of two parts which snap together. Lid has VORON logo which can be printed in different colors with around 2 filament swaps, depending on your setup. Alt... | [
"box",
"gift",
"heart",
"valentine",
"valentinesday",
"voron"
] | Art & Design > Other Art & Designs | [
"760037/images/image_1_compressed.jpg"
] | [
"760037/stls/Vorontine_Box.stl"
] | GPL3.0 | https://www.printables.com/model/760037 | data_0037.tar |
751891 | Valentine's Day Heart Thump Puzzle Box (Easy) | <p>Gift-friendly Valentine's Day themed puzzle box: find the hidden heart.</p><p> </p><figure class="media"><oembed url="https://youtu.be/SuOGrPg5MMU"></oembed></figure><p><a href="https://t.co/rMyhBoEINv">youtu.be/SuOGrPg5MMU</a></p><p> </p><h3><strong>Printing</strong></h3><ul><li>All parts can be printed w... | [
"puzzle",
"heart",
"valentine",
"valentinesday",
"puzzlebox",
"3dprinty"
] | Toys & Games > Puzzles & Brain-teasers | [
"751891/images/image_1_compressed.jpg"
] | [
"751891/stls/Case.stl",
"751891/stls/Core.stl",
"751891/stls/Demo - Assembled.stl",
"751891/stls/Demo - Exploded View.stl",
"751891/stls/Key.stl",
"751891/stls/Prize.stl",
"751891/stls/Side.stl"
] | CC-BY | https://www.printables.com/model/751891 | data_0037.tar |
732302 | Valentine's Day Hearts | <p><i><strong>You may also like the whole Valentine's Day collection </strong></i><a href="https://www.printables.com/@ArgiCZ/collections/1261473"><i><strong>here</strong></i></a><i><strong>.</strong></i></p> | [
"decoration",
"love",
"heart",
"valentine",
"valentinesday"
] | Art & Design > Other Art & Designs | [
"732302/images/image_1_compressed.jpg"
] | [
"732302/stls/heart1.stl",
"732302/stls/heart2.stl",
"732302/stls/heart3.stl",
"732302/stls/heart4.stl",
"732302/stls/heart5.stl",
"732302/stls/heart6.stl",
"732302/stls/heart7.stl",
"732302/stls/heart8.stl",
"732302/stls/heart9.stl"
] | CC-BY | https://www.printables.com/model/732302 | data_0037.tar |
388975 | Valentine's Day Puzzle Heart | <p>Scale Valentine's Day Puzzle Heart to the size you'd like and print it out.</p> | [
"puzzle",
"gift",
"3dpuzzle",
"love",
"heart",
"valentinesday",
"valentinesdaygifts",
"heartvalentinesday",
"valentinstag",
"happyvalentine"
] | Art & Design > Other Art & Designs | [
"388975/images/image_1_compressed.jpg",
"388975/images/image_2_compressed.jpg",
"388975/images/image_3_compressed.jpg",
"388975/images/image_4_compressed.jpg"
] | [
"388975/stls/puzzle_heart.stl",
"388975/stls/puzzle_heart_insert.stl"
] | CC-BY | https://www.printables.com/model/388975 | data_0037.tar |
390275 | Valentine's LOVE YOU | Just a mix of the words LOVE and YOU | Download free 3D printable STL models | [
"love",
"prusaprinters",
"valentine",
"valentinesday",
"iloveyou"
] | Seasonal designs > Winter & Christmas & New Year's | [
"390275/images/image_1_compressed.jpg"
] | [
"390275/stls/LOVE YOU.stl"
] | CC0 | https://www.printables.com/model/390275 | data_0037.tar |
390713 | Valentines Bookmarks | <p>Printed with .6mm nozzle with .30mm layer heights. Prints in 5 minutes or a dozen in about an hour. </p> | [] | Household > Office | [
"390713/images/image_1_compressed.jpg",
"390713/images/image_2_compressed.jpg"
] | [
"390713/stls/Bookmark Valentine SMILE.stl",
"390713/stls/Valentines Bookmark BE MINE.stl",
"390713/stls/Valentines Bookmark LOVE.stl",
"390713/stls/Valentines Bookmark XOXO.stl"
] | CC-BY | https://www.printables.com/model/390713 | data_0037.tar |
715985 | Valentines Bulbasaur - Painted | <p>The original model colours do not come through on prusa slicer so I painted the model. Its not easy to paint, smart fill did a portion but then need small sphere and triangle painting to get the detail. Uploaded the colour file for others to use.</p> | [
"pokemon",
"bulbasaur",
"valentinesdaygifts",
"valentines"
] | Tabletop Miniatures > Characters & Monsters | [
"715985/images/image_1_compressed.jpg"
] | [
"715985/stls/Painted Bulbasaur 3.stl"
] | CC0 | https://www.printables.com/model/715985 | data_0037.tar |
1150330 | Valentines Day Teddy Bear | <ul><li>0.12 Layer Height</li><li>Infill density 15%</li><li>Print with supports</li></ul> | [
"cute",
"fun",
"bear",
"adorable",
"teddybear"
] | World & Scans > Animals | [
"1150330/images/image_1_compressed.jpg"
] | [
"1150330/stls/teddy+bear.stl",
"1150330/stls/Teddy+Bear.stl"
] | CC0 | https://www.printables.com/model/1150330 | data_0037.tar |
21118 | Valentines Heart Vases | <p>2 simple but elegant Vases for Valentines Day</p><p>(<strong>note, 2020 small heart vases out now - </strong><a href="https://www.printables.com/model/21138-small-heart-vases"><strong>https://www.prusaprinters.org/prints/21138-small-heart-vases</strong></a><strong> </strong>)</p><p>Two Halves Make a Whole<br>Two Joi... | [
"vase",
"nsfw",
"heart",
"thingiverse",
"valentine",
"valentinesday",
"valentines"
] | Household > Home Decor | [
"21118/images/image_1_compressed.jpg",
"21118/images/image_2_compressed.jpg",
"21118/images/image_3_compressed.jpg",
"21118/images/image_4_compressed.jpg",
"21118/images/image_5_compressed.jpg",
"21118/images/image_6_compressed.jpg"
] | [
"21118/stls/2heartless.stl",
"21118/stls/2hearts.stl",
"21118/stls/roundededge.stl",
"21118/stls/squareedgevase.stl",
"21118/stls/twohalvesvase.stl"
] | CC-BY | https://www.printables.com/model/21118 | data_0037.tar |
749974 | Valentinstags Rose | Valentinstags Rose, Rosen Geschenk, Valentinstags Geschenk, Plastik Rose | Download free 3D printable STL models | [] | 3D Printers > Accessories | [
"749974/images/image_1_compressed.jpg",
"749974/images/image_2_compressed.jpg"
] | [
"749974/stls/Rose.stl",
"749974/stls/Stengel.stl"
] | CC-BY | https://www.printables.com/model/749974 | data_0037.tar |
189076 | Vallejo 17ml Printable Cap |
<p>Designed 3D printable Vallejo 17ml Cap. Some of the caps on my paint set were splitting and I didn't have any spare empty bottles to reuse the caps. So, I designed this printable version to do the job.</p>
<p>Printing:</p>
<p>Printed at 0.15mm layer height using 0.40mm nozzle.</p>
<p>Fillament use was PLA, but yo... | [
"thingiverse",
"vallejo"
] | Hobby & Makers > Other Ideas | [
"189076/images/image_1_compressed.jpg",
"189076/images/image_2_compressed.jpg",
"189076/images/image_3_compressed.jpg",
"189076/images/image_4_compressed.jpg",
"189076/images/image_5_compressed.jpg"
] | [
"189076/stls/Vallejo_Cap.stl"
] | CC-BY | https://www.printables.com/model/189076 | data_0037.tar |
652912 | Vallejo / Scale75 - 17ml Cap | The original design is very good, but the Scale75 paints still leaked. I added a sphere on the top that fits perfectly with the paint bottle, just like the original caps.
When printed with SLA, it's possible to achieve great results. I also get good results with FDM, printer, in both cases it's necessary to add suppor... | [
"lid",
"cap",
"vallejo",
"17ml",
"scale75"
] | Hobby & Makers > Other Ideas | [
"652912/images/image_1_compressed.jpg",
"652912/images/image_2_compressed.jpg",
"652912/images/image_3_compressed.jpg",
"652912/images/image_4_compressed.jpg"
] | [
"652912/stls/Scale75_cap.stl"
] | CC-BY | https://www.printables.com/model/652912 | data_0037.tar |
177796 | Valorant 2.0 prime karambit | <p>See Original : <a href="/search">https://www.thingiverse.com/search?q=foldable+karambit&type=things&sort=relevant</a></p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>FlashForge</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Adventurer 3</p></div>
<p><strong>Raf... | [
"knife",
"foldable",
"thingiverse",
"karambit",
"valorantknife"
] | Toys & Games > Outdoor Toys | [
"177796/images/image_1_compressed.jpg",
"177796/images/image_2_compressed.jpg",
"177796/images/image_3_compressed.jpg",
"177796/images/image_4_compressed.jpg",
"177796/images/image_5_compressed.jpg",
"177796/images/image_6_compressed.jpg"
] | [
"177796/stls/arms.stl",
"177796/stls/blade+handle_separated.stl",
"177796/stls/blade+handle_separated_inversed.stl",
"177796/stls/rivets.stl"
] | CC-BY | https://www.printables.com/model/177796 | data_0037.tar |
535725 | Valorant Currency | <p>Add color change when slicing if you want dual color coins.</p> | [
"gaming",
"currency",
"valorant"
] | Gadgets > Video Games | [
"535725/images/image_1_compressed.jpg",
"535725/images/image_2_compressed.jpg",
"535725/images/image_3_compressed.jpg"
] | [
"535725/stls/Radianite - Coin.stl",
"535725/stls/ValoPoints - Coin.stl"
] | CC0 | https://www.printables.com/model/535725 | data_0037.tar |
162502 | Valve butterfly handle amplifier |
<p>Sometimes you have to shut off water, for maintenance or repair.</p>
<p>Shut off valves are very often hard to reach and I find 'butterfly' handles even harder to manipulate. They tend to be a bit jammed and you have very little space for your fingers to work your way.</p>
<p>A tool to leverage those handles was ... | [
"handle",
"valve",
"tap",
"plumbing",
"thingiverse",
"waterpipe",
"gaspipe"
] | Household > Other House Equipment | [
"162502/images/image_1_compressed.jpg",
"162502/images/image_2_compressed.jpg",
"162502/images/image_3_compressed.jpg"
] | [
"162502/stls/Butterfly_handle_amplifier.stl"
] | CC-BY | https://www.printables.com/model/162502 | data_0037.tar |
164339 | Valve Cap Presta Racing Hangloose | <p>PLA / PETG</p><p>0,1-0,2 </p> | [
"bike",
"hangloose",
"valvecap"
] | Sports & Outdoor > Other Sports | [
"164339/images/image_1_compressed.jpg"
] | [
"164339/stls/Valvecap_Presta_all (6x) (Mini).stl",
"164339/stls/Valvecap_Presta_Fist v7.stl",
"164339/stls/Valvecap_Presta_Hangloose v1.stl",
"164339/stls/Valvecap_Presta_Rock v2.stl"
] | CC0 | https://www.printables.com/model/164339 | data_0037.tar |
156499 | valve extender spanner / wrench (e.g. for road bikes) |
<p>Ever lost the tool for mounting your valve extensions? Print this!</p>
<p>Print it with a very high infill as it strengthens the structure!</p>
<p>(printed mine with 0.95 infill; 0.15 layer; ABS, 243/100°C)</p>
<p><a href="http://www.slowtwitch.com/Tech/Valve_Extender_How-To_3007.html">http://www.slowtwitch.com/... | [
"sport",
"tube",
"bike",
"tire",
"thingiverse",
"multitool",
"triathlon",
"roadbike"
] | Sports & Outdoor > Other Sports | [
"156499/images/image_1_compressed.jpg",
"156499/images/image_2_compressed.jpg",
"156499/images/image_3_compressed.jpg"
] | [
"156499/stls/wrench.stl"
] | CC-BY | https://www.printables.com/model/156499 | data_0037.tar |
49551 | Valve Index Adapterholder | <p>Save your GPU and mount the adapter to your Valve Index.<br/>
I made one model with tread inserts and one with nutpockets so you can choose the one you prefer.</p>
<p>Printed with Prusament PETG 0,30 mm draft.</p>
<p>Hope you like it.</p> | [] | Gadgets > Virtual Reality | [
"49551/images/image_1_compressed.jpg",
"49551/images/image_2_compressed.jpg"
] | [
"49551/stls/valve-index-adapter-cap.stl",
"49551/stls/valve-index-adapterholder-v15.stl",
"49551/stls/valve-index-adapterholder-with-nutpockets-v1.stl",
"49551/stls/valve-index-bracket-with-nutpockets-v2.stl",
"49551/stls/valve-index-mount-bracket-v1.stl"
] | CC0 | https://www.printables.com/model/49551 | data_0037.tar |
35546 | Valve Index Basestation Power Cord Wrap | <p>This print is used to help organize the super long cables for the Valve Index Basestations (SteamVR2).</p>
<p>To use, detach the cable from the brick, slide the brick into the model, reattach the cable and wrap around the brick, finally plug in the jack into the holder. There is a friction lock to keep it in place a... | [] | Hobby & Makers > Organizers | [
"35546/images/image_1_compressed.jpg",
"35546/images/image_2_compressed.jpg",
"35546/images/image_3_compressed.jpg",
"35546/images/image_4_compressed.jpg"
] | [
"35546/stls/indexbasestationpowerwrap.stl"
] | CC-BY | https://www.printables.com/model/35546 | data_0037.tar |
321490 | Valve Index cable strain relief with upper guide | <p>This remix is a widened version of the v3 strain relief from <a href="https://www.printables.com/de/social/46581-vvlasy/about">VVLasy</a>, which now also features an upper cable guide to ensure a constant bending radius even when the cable is being pulled.</p><p>The holes for the cable ties have been replaced with s... | [
"cable",
"valve",
"index",
"relief",
"strain",
"strainrelief",
"cableclip",
"valveindex"
] | Gadgets > Virtual Reality | [
"321490/images/image_1_compressed.jpg",
"321490/images/image_2_compressed.jpg"
] | [
"321490/stls/Index_cable_strain_relief_v3_mod.stl"
] | CC-BY | https://www.printables.com/model/321490 | data_0037.tar |
72763 | Valve index controller hook | <p>A hook for the valve index controller to keep the elastic pull out the way.<br> <br><br>I printed in both petg and pla, but I recommend petg.<br>layer height 0.2<br>paint on supports for the hooks<br><br>You might need a brim, for me it printed fine with petg on the texture sheet without one.<br><br><strong>UPD... | [
"steam",
"controller",
"vr",
"index",
"reality",
"virtual"
] | Gadgets > Virtual Reality | [
"72763/images/image_1_compressed.jpg",
"72763/images/image_2_compressed.jpg"
] | [
"72763/stls/index_controller_elastic_hook_V2.stl",
"72763/stls/L_index_controller_hook.stl",
"72763/stls/L_R_index_controller_hook.stl",
"72763/stls/R_index_controller_hook.stl"
] | GPL3.0 | https://www.printables.com/model/72763 | data_0037.tar |
15332 | Valve Index Controllers: First Base V2 | <p>This is a simple, minimalistic base to set Valve's Index controllers on for storage and charging. The base measures 3.625"W x 3.625"D x 2.5"H.</p>
<p>The correct charging cables must be used to work with the base properly. A small capsule-shaped flat tip is placed and left in place on the Index Controller's chargin... | [
"thingiverse",
"valveindex",
"vrcontrollers"
] | Gadgets > Virtual Reality | [
"15332/images/image_1_compressed.jpg",
"15332/images/image_2_compressed.jpg",
"15332/images/image_3_compressed.jpg",
"15332/images/image_4_compressed.jpg",
"15332/images/image_5_compressed.jpg",
"15332/images/image_6_compressed.jpg",
"15332/images/image_7_compressed.jpg",
"15332/images/image_8_compres... | [
"15332/stls/logo_flat.stl",
"15332/stls/logo_flat_15332.stl",
"15332/stls/logo_hemisphere.stl",
"15332/stls/logo_hemisphere_15332.stl",
"15332/stls/logo_lens.stl",
"15332/stls/logo_lens_15332.stl",
"15332/stls/valveindexcontrollerbase_v2.stl",
"15332/stls/valveindexcontrollerbase_v2_15332.stl",
"153... | CC-BY | https://www.printables.com/model/15332 | data_0037.tar |
15333 | Valve Index Controllers: The Boomerang BCT | <p>As hinted in my first creation page (<a href="https://www.thingiverse.com/thing:3744655">http://www.thingiverse.com/thing:3744655</a> and which I will now call "First Base V2") I have made a version that has a larger footprint, and allows the Valve Index controllers to be inserted while in a fairly natural, hand-hel... | [
"thingiverse",
"valveindex",
"vrcontrollers",
"controllerstand",
"dualcontrollerstand"
] | Gadgets > Virtual Reality | [
"15333/images/image_1_compressed.jpg",
"15333/images/image_10_compressed.jpg",
"15333/images/image_11_compressed.jpg",
"15333/images/image_12_compressed.jpg",
"15333/images/image_13_compressed.jpg",
"15333/images/image_14_compressed.jpg",
"15333/images/image_15_compressed.jpg",
"15333/images/image_16_... | [
"15333/stls/boomerangv2.stl",
"15333/stls/boomerangv2_15333.stl",
"15333/stls/logo_flat.stl",
"15333/stls/logo_hemisphere.stl",
"15333/stls/logo_lens.stl"
] | CC-BY | https://www.printables.com/model/15333 | data_0037.tar |
364726 | Valve Index Counterweight | <p>This is a counterweight to balance the front-heavy Valve Index VR headset, using pennies. It is compatible with the Index's "Headset Cradle Adapter" (the foam pad meant for smaller heads). Included is also a version that redirects the cord upwards in case an overhead tether is used.</p><p>Two penny holder options ar... | [
"valve",
"vrheadset",
"virtualreality",
"index",
"thingiverse",
"valveindex",
"ergonomics"
] | Gadgets > Virtual Reality | [
"364726/images/image_1_compressed.jpg",
"364726/images/image_2_compressed.jpg",
"364726/images/image_3_compressed.jpg",
"364726/images/image_4_compressed.jpg"
] | [
"364726/stls/Base.stl",
"364726/stls/Cord_Guide_Base.stl",
"364726/stls/Cover.stl",
"364726/stls/Penny Sleeve One Piece.stl",
"364726/stls/Sleeves.stl"
] | CC-BY | https://www.printables.com/model/364726 | data_0037.tar |
651068 | Valve Index HDM + Controllers Wall mount | <p>I wanted a decently good looking wall mount for the hmd + controllers, and none of the existing ones really checked all the boxes for me. </p><h4>Controllers</h4><p>I liked how the <a href="https://www.amazon.co.uk/AMVR-Controllers-Charging-Functions-Controller/dp/B08MVQCSV5">AMVR mount</a> held the controllers... | [
"mount",
"wallmount",
"valve",
"vr",
"index",
"knuckles",
"hmd",
"valveindex",
"valveindexknuckles"
] | Hobby & Makers > Organizers | [
"651068/images/image_1_compressed.jpg",
"651068/images/image_2_compressed.jpg",
"651068/images/image_3_compressed.jpg",
"651068/images/image_4_compressed.jpg",
"651068/images/image_5_compressed.jpg"
] | [
"651068/stls/controller-mount.stl",
"651068/stls/hmd-mount.stl"
] | CC-BY | https://www.printables.com/model/651068 | data_0037.tar |
38530 | Valve Index Valve Knob ++ | <p>Remodeled the whole thing. And Centered the axis.<br/>
Split it in 2 Parts so i can be printed in 2 colors.<br/>
Joined by a Thread, no glue needed, thread is strong enough for intended use.</p>
<p>Thanks a lot<br/>
gwizdavid<br/>
and<br/>
REDxFROG</p>
<p>for the nice design</p>
<h3>Print instructions</h3><h3>C... | [
"valve",
"index",
"thingiverse"
] | Gadgets > Virtual Reality | [
"38530/images/image_1_compressed.jpg",
"38530/images/image_2_compressed.jpg",
"38530/images/image_3_compressed.jpg",
"38530/images/image_4_compressed.jpg"
] | [
"38530/stls/large_display_reremakevalvebase_38530.stl",
"38530/stls/large_display_reremakevalvehead_38530.stl",
"38530/stls/reremakevalvebase.stl",
"38530/stls/reremakevalvehead.stl"
] | CC-BY | https://www.printables.com/model/38530 | data_0037.tar |
356602 | Vampire Cat |
<p>*<strong>Update 9-10-22</strong>* Updated scan with some minor error corrections and positioned the scan with the base of the statue in the x-y plane.</p>
<p>This is a scan of a cat dressed up as a vampire for Halloween. Enjoy!</p>
<p>If printing via FDM, please lower the scan 1 or 2mm in Z (into the bed) before ... | [
"halloween",
"cat",
"keychain",
"halloweendecoration",
"vampire",
"thingiverse",
"catstatue"
] | World & Scans > Animals | [
"356602/images/image_1_compressed.jpg",
"356602/images/image_2_compressed.jpg"
] | [
"356602/stls/vampire_cat_edit.stl"
] | CC-BY | https://www.printables.com/model/356602 | data_0037.tar |
75262 | Vampire Updated | <p>Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a href="https://www.patreon.com/mz4250">https://www.patreon.com/mz4250</a></p><p>Patrons have access to all my files in one place, a request board, as well a... | [] | Toys & Games > Board Games | [
"75262/images/image_1_compressed.jpg"
] | [
"75262/stls/Vampire Updated presupported.stl",
"75262/stls/Vampire Updated.stl"
] | CC-BY | https://www.printables.com/model/75262 | data_0037.tar |
14732 | Vampires | <p>Print as is or with supports.</p>
<p>Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a href="https://www.patreon.com/mz4250">https://www.patreon.com/mz4250</a></p>
<p>Patrons have access ... | [
"horror",
"dnd",
"undead",
"pathfinder",
"vampire",
"thingiverse",
"blood",
"vampires"
] | Toys & Games > Board Games | [
"14732/images/image_1_compressed.jpg",
"14732/images/image_2_compressed.jpg",
"14732/images/image_3_compressed.jpg"
] | [
"14732/stls/vampire.stl",
"14732/stls/vampire_lord.stl",
"14732/stls/vampire_spawn.stl"
] | CC-BY | https://www.printables.com/model/14732 | data_0037.tar |
1228150 | VANGUARD 13 - a full Dummy 13 conversion! | <h4>Introducing the <strong>Vanguard 13!</strong></h4><p>Designed with frontline deployment and melee prowess in mind, the Vanguard is the latest soldier in the 13th War Effort!</p><p>This is my most tested model to date. As you can see, I've printed the final model five times already, with a sixth coming out as I type... | [
"armor",
"13",
"dummy",
"combat",
"powerarmor",
"dummy13",
"dummy13accessory",
"dummy13mods",
"dummy13armor"
] | Toys & Games > Action Figures & Statues | [
"1228150/images/image_1_compressed.jpg",
"1228150/images/image_2_compressed.jpg",
"1228150/images/image_3_compressed.jpg",
"1228150/images/image_4_compressed.jpg",
"1228150/images/image_5_compressed.jpg",
"1228150/images/image_6_compressed.jpg"
] | [
"1228150/stls/All Vanguard Frame (NO HANDS).stl",
"1228150/stls/All Vanguard Frame.stl",
"1228150/stls/frame-abdomen.stl",
"1228150/stls/frame-ankle-2x.stl",
"1228150/stls/frame-clavicle-2x.stl",
"1228150/stls/frame-forearm-2x.stl",
"1228150/stls/frame-head.stl",
"1228150/stls/frame-hip-and-shoulder-4... | CC-BY | https://www.printables.com/model/1228150 | data_0037.tar |
1101281 | VANOCE | Hanging Star, String Art, Christmas Tree | <p><strong>VANOCE | Hanging Star, String Art, Christmas Tree</strong></p><p>The <strong>small string-art hanging star</strong> from my collection of <a href="https://cults3d.com/en/design-collections/Charles_Regaud/vanoce-christmas-tree-decorations">Christmas Tree decorations</a>.</p><p>It <strong>prints 100% without s... | [
"christmas",
"star",
"free",
"fastprint",
"nosupport",
"christmasornament",
"christmasdecoration",
"christmastree",
"homedecor",
"noel",
"vanoce",
"christmastreeornament",
"nosupports",
"homedecoration",
"christmasstar",
"arboldenavidad",
"navidad",
"estrella",
"natale",
"chris... | Seasonal designs > Winter & Christmas & New Year's | [
"1101281/images/image_1_compressed.jpg",
"1101281/images/image_2_compressed.jpg",
"1101281/images/image_3_compressed.jpg",
"1101281/images/image_4_compressed.jpg",
"1101281/images/image_5_compressed.jpg"
] | [
"1101281/stls/VANOCE_Hanging-star.stl"
] | CC-BY | https://www.printables.com/model/1101281 | data_0037.tar |
1101272 | VANOCE | String Art Ball, Christmas Tree | <p><strong>VANOCE | String Art Ball, Christmas Tree</strong></p><p>The <strong>3D string art ball</strong> from my collection of <a href="https://www.printables.com/@chregaud_1573771/collections/1905595">Christmas Tree decorations</a>.</p><p>It <strong>prints 100% without supports</strong>, despite the strings floating... | [
"decoration",
"ornament",
"nosupport",
"christmasornament",
"christmasdecoration",
"christmastree",
"homedecor",
"christmasball",
"bauble",
"vanoce",
"christmastreeornament",
"homedecoration",
"arboldenavidad",
"navidad",
"christmasbauble",
"natale",
"christmastreedecoration",
"str... | Seasonal designs > Winter & Christmas & New Year's | [
"1101272/images/image_1_compressed.jpg",
"1101272/images/image_2_compressed.jpg",
"1101272/images/image_3_compressed.jpg",
"1101272/images/image_4_compressed.jpg",
"1101272/images/image_5_compressed.jpg",
"1101272/images/image_6_compressed.jpg"
] | [
"1101272/stls/VANOCE_3D-Ball_string-art.stl"
] | CC-BY | https://www.printables.com/model/1101272 | data_0037.tar |
1101223 | VANOCE | String Art Flat Ball, Christmas Tree | <p><strong>VANOCE | String Art Flat Ball, Christmas Tree</strong></p><p>The <strong>flat string art ball</strong> from my collection of <a href="https://www.printables.com/@chregaud_1573771/collections/1905595">Christmas Tree decorations</a>.</p><p>It <strong>prints 100% without supports</strong>, despite the strings f... | [
"decoration",
"christmas",
"christmasornament",
"christmasdecoration",
"christmastree",
"homedecor",
"noel",
"christmastreeornament",
"homedecoration",
"arboldenavidad",
"stringart",
"alberodinatale"
] | Seasonal designs > Winter & Christmas & New Year's | [
"1101223/images/image_1_compressed.jpg",
"1101223/images/image_2_compressed.jpg",
"1101223/images/image_3_compressed.jpg",
"1101223/images/image_4_compressed.jpg"
] | [
"1101223/stls/VANOCE_Flat-Ball_string-art.stl"
] | CC-BY | https://www.printables.com/model/1101223 | data_0037.tar |
135143 | variabler Adapter Duplo-Brio/Ikea/Holzeisenbahn/Einhorn | <p>Die Adapter passen auf Duplosteine, nebeneinander passen sie nur falls der Drucker sehr genau arbeitet und eher unter- als überextrudiert. Die oberen Noppen nehmen zwar Duplosteine auf, klemmen aber nicht.</p> | [] | Toys & Games > Building Toys | [
"135143/images/image_1_compressed.jpg",
"135143/images/image_2_compressed.jpg",
"135143/images/image_3_compressed.jpg"
] | [
"135143/stls/Duplo-Holzeisenbahn-Wippenadapter mit Seitenführung.stl",
"135143/stls/Stein.stl",
"135143/stls/Wippe 4er.stl",
"135143/stls/Wippe.stl"
] | CC0 | https://www.printables.com/model/135143 | data_0037.tar |
42082 | Variations on the Theme - Lack Table Sheet Holder | <p>Here are a number of remixes of the nice side Mount Lack table sheet holder by Slider.</p>
<ol>
<li>A two-slot version</li>
<li>A three-slot version</li>
<li>A three-slot version which has also been 'shortened'</li>
</ol>
<h3>Print instructions</h3><p>I printed with 0.20mm layers PLA, worked out great.</p> | [] | 3D Printers > Accessories | [
"42082/images/image_1_compressed.jpg",
"42082/images/image_2_compressed.jpg",
"42082/images/image_3_compressed.jpg"
] | [
"42082/stls/lack-sheet-holder-2-slots.stl",
"42082/stls/lack-sheet-holder-3-slots-short.stl",
"42082/stls/lack-sheet-holder-3-slots.stl"
] | CC0 | https://www.printables.com/model/42082 | data_0037.tar |
123549 | Various Gems | <p>Some basic gemstone shapes, modeled to replace the stock tokens in the game Splendor. Highly recommend printing or at least painting in the corresponding colors!</p> | [
"coin",
"gold",
"tokens",
"splendor",
"diamond",
"opal",
"gems",
"gemstones",
"ruby",
"onyx"
] | Toys & Games > Board Games | [
"123549/images/image_1_compressed.jpg",
"123549/images/image_2_compressed.jpg",
"123549/images/image_3_compressed.jpg",
"123549/images/image_4_compressed.jpg",
"123549/images/image_5_compressed.jpg",
"123549/images/image_6_compressed.jpg",
"123549/images/image_7_compressed.jpg"
] | [
"123549/stls/Coin.stl",
"123549/stls/GemBlack.stl",
"123549/stls/GemBlue.stl",
"123549/stls/GemGreen.stl",
"123549/stls/GemRed.stl",
"123549/stls/GemWhite.stl"
] | CC-BY | https://www.printables.com/model/123549 | data_0037.tar |
7643 | Various Size Stackable Resistor Storage Box | <p>Thanks to <a href="https://www.thingiverse.com/STTrife">https://www.thingiverse.com/STTrife</a> for posting this, i wanted some variations that were larger and fit the existing locking locations. These are printed and can be stacked with existing storage boxes. See his excellent write-up for more details. Feel free ... | [
"organizer",
"storage",
"organization"
] | Hobby & Makers > Organizers | [
"7643/images/image_1_compressed.jpg",
"7643/images/image_10_compressed.jpg",
"7643/images/image_2_compressed.jpg",
"7643/images/image_3_compressed.jpg",
"7643/images/image_4_compressed.jpg",
"7643/images/image_5_compressed.jpg",
"7643/images/image_6_compressed.jpg",
"7643/images/image_7_compressed.jpg... | [
"7643/stls/1lengthxdepthxheight-unitstxt.stl",
"7643/stls/boxbottommiddle_2x1x1.stl",
"7643/stls/boxmiddlemiddledblwidedbltalldbldeepdrwrdivlid.stl",
"7643/stls/boxmiddlemiddledblwidedbltalldbldeepdrwrdivlidlid.stl",
"7643/stls/boxmiddlemiddle_25x1x2.stl",
"7643/stls/boxmiddlemiddle_25x2x2.stl",
"7643/s... | CC-BY | https://www.printables.com/model/7643 | data_0037.tar |
28195 | Various Spin Tops vol.2 | <p>There are 2 more topspins<br/>
1)Patternspiner<br/>
2)Proppellespiner</p>
<p>first pack lay there:<br/>
<a href="https://www.printables.com/model/28045-various-spin-tops">https://www.prusaprinters.org/prints/28045-various-spin-tops</a></p>
<h3>Print instructions</h3><p>Every spin top can be printed without support i... | [
"toy",
"spinner",
"cats",
"spintop"
] | Toys & Games > Other Toys & Games | [
"28195/images/image_1_compressed.jpg",
"28195/images/image_2_compressed.jpg",
"28195/images/image_3_compressed.jpg"
] | [
"28195/stls/patternspin_main.stl",
"28195/stls/patternspin_spike.stl",
"28195/stls/propellerspin_main.stl",
"28195/stls/propellerspin_spike.stl"
] | CC0 | https://www.printables.com/model/28195 | data_0037.tar |
131031 | Vase | <p>Hi, this vase has a curvature with cuts going around.</p><p>Cuts are aprox 12mm deep.</p><p>Height is 100mm. You can scale if you want.</p><p>Print instructions: 2 outer perimeters. Couple of bottom solid layers.</p><p>Be careful with overhang at the beginning. (PLA was no problem. </p><p>For stripes are made w... | [
"vase",
"sculpture",
"spiralvase",
"flowervase"
] | Household > Living Room | [
"131031/images/image_1_compressed.jpg",
"131031/images/image_2_compressed.jpg"
] | [
"131031/stls/vase rip schrag8.stl"
] | CC-BY | https://www.printables.com/model/131031 | data_0037.tar |
42144 | Vase 07 | <p>I've played a little bit with the pipe command in Fusion 360 and the result is a little set of vases (or perhaps containers for pencils, spoons etc.) that might be pleasing to you.</p>
<p>2021/08/01: A large but very low version has been added that we use to serve biscuits or sweets. BTW: Even if it's not a solid mo... | [
"vase",
"container",
"fusion360",
"vases",
"flowervase",
"thingiverse",
"autodeskfusion360",
"flowervases",
"containers"
] | Household > Home Decor | [
"42144/images/image_1_compressed.jpg",
"42144/images/image_2_compressed.jpg"
] | [
"42144/stls/vase-07-large-low-lesspipeshigh.stl",
"42144/stls/vase-07-large-low-lesspipeslow.stl",
"42144/stls/vase-07-large-low-smalltubeshigh.stl",
"42144/stls/vase-07-large-low-smalltubeslow.stl",
"42144/stls/vase-07-large-lowhigh.stl",
"42144/stls/vase-07-large-lowlow.stl",
"42144/stls/vase-07-large... | CC-BY | https://www.printables.com/model/42144 | data_0037.tar |
42218 | Vase 08 | <p>I've played a little bit with the pipe command in Fusion 360 and the result is a little set of vases (or perhaps containers for pencils, spoons etc.) that might be pleasing to you.</p><p>2020/11/15: Added some variations based on what <a href="https://www.printables.com/social/5-mikolas-zuza/prints">https://www.prus... | [
"vase",
"container",
"vases",
"flowervase",
"thingiverse",
"flowervases",
"containers"
] | Household > Home Decor | [
"42218/images/image_1_compressed.jpg",
"42218/images/image_2_compressed.jpg",
"42218/images/image_3_compressed.jpg"
] | [
"42218/stls/vase-08-large-low-lesspipeshigh.stl",
"42218/stls/vase-08-large-low-lesspipeslow.stl",
"42218/stls/vase-08-large-low-smalltubeshigh.stl",
"42218/stls/vase-08-large-low-smalltubeslow.stl",
"42218/stls/vase-08-large-lowhigh.stl",
"42218/stls/vase-08-large-lowlow.stl",
"42218/stls/vase-08-large... | CC-BY | https://www.printables.com/model/42218 | data_0037.tar |
42451 | Vase 10 | <p>I've played a little bit with the pipe command in Fusion 360 and the result is a little set of vases (or perhaps containers for pencils, spoons etc.) that might be pleasing to you.</p>
<p>2020/11/17: Added some variations based on what <a href="https://www.printables.com/social/5-mikolas-zuza/prints">https://www.pru... | [
"vase",
"container",
"fusion360",
"vases",
"flowervase",
"thingiverse",
"autodeskfusion360",
"flowervases",
"containers"
] | Household > Home Decor | [
"42451/images/image_1_compressed.jpg",
"42451/images/image_2_compressed.jpg",
"42451/images/image_3_compressed.jpg"
] | [
"42451/stls/vase-10-large-low-lesspipeshigh.stl",
"42451/stls/vase-10-large-low-lesspipeslow.stl",
"42451/stls/vase-10-large-low-smalltubeshigh.stl",
"42451/stls/vase-10-large-low-smalltubeslow.stl",
"42451/stls/vase-10-large-lowhigh.stl",
"42451/stls/vase-10-large-lowlow.stl",
"42451/stls/vase-10-large... | CC-BY | https://www.printables.com/model/42451 | data_0037.tar |
42587 | Vase 11 | <p>I've played a little bit with the pipe command in Fusion 360 and the result is a little set of vases (or perhaps containers for pencils, spoons etc.) that might be pleasing to you.</p><p>2022/02/03: Base on the latest comments I've added a version with straight walls and a vase mode version. Additionally all version... | [
"vase",
"container",
"fusion360",
"vases",
"flowervase",
"thingiverse",
"autodeskfusion360",
"flowervases",
"containers"
] | Household > Home Decor | [
"42587/images/image_1_compressed.jpg",
"42587/images/image_2_compressed.jpg",
"42587/images/image_3_compressed.jpg"
] | [
"42587/stls/Vase-11-StraightWalls.high.stl",
"42587/stls/Vase-11-StraightWalls.low.stl",
"42587/stls/Vase-11-StraightWalls.ultra.stl",
"42587/stls/Vase-11-VaseMode-Simple.high.stl",
"42587/stls/Vase-11-VaseMode-Simple.low.stl",
"42587/stls/Vase-11-VaseMode-Simple.ultra.stl",
"42587/stls/Vase-11-VaseMode... | CC-BY | https://www.printables.com/model/42587 | data_0037.tar |
42765 | Vase 13 | <p>I've played a little bit with the pipe command in Fusion 360 and the result is a little set of vases (or perhaps containers for pencils, spoons etc.) that might be pleasing to you.</p>
<p>If you like this little thing, you might want to check those ones, too:</p>
<p><a href="https://www.printables.com/social/3373-wi... | [
"vase",
"fusion360",
"vases",
"flowervase",
"thingiverse",
"autodeskfusion360",
"flowervases"
] | Household > Home Decor | [
"42765/images/image_1_compressed.jpg"
] | [
"42765/stls/vase-13high.stl",
"42765/stls/vase-13low.stl"
] | CC-BY | https://www.printables.com/model/42765 | data_0037.tar |
43958 | Vase 18 | <p>I've played a little bit with the pipe command in Fusion 360 and the result is a little set of vases (or perhaps containers for pencils, spoons etc.) that might be pleasing to you.</p>
<p>If you like this little thing, you might want to check those ones, too:</p>
<p><a href="https://www.printables.com/social/3373-wi... | [
"vase",
"fusion360",
"vases",
"flowervase",
"thingiverse",
"flowervases"
] | Household > Home Decor | [
"43958/images/image_1_compressed.jpg",
"43958/images/image_2_compressed.jpg",
"43958/images/image_3_compressed.jpg"
] | [
"43958/stls/vase-18high.stl",
"43958/stls/vase-18low.stl"
] | CC-BY | https://www.printables.com/model/43958 | data_0037.tar |
76459 | Vase Clean Design | <p>Since I'm totally into the vase mode, I've designed a few vases in Fusion360 and am excited to share them with you as well.<br> </p><p>This vase gets more open at the top, is slightly twisted and has a nice clean design.</p><p> </p><p><strong>Size:</strong> 118mm wide and 125mm high</p><p><strong>Nozzle:</... | [
"vase",
"lowpoly",
"vasemode"
] | Household > Home Decor | [
"76459/images/image_1_compressed.jpg",
"76459/images/image_2_compressed.jpg",
"76459/images/image_3_compressed.jpg"
] | [
"76459/stls/Vase_Clean_Design.stl"
] | CC-BY | https://www.printables.com/model/76459 | data_0037.tar |
252190 | Vase Collection | Vases designed in Fusion 360. Some designs were inspired by work from Devin Montes of ＂Make Anything＂ YouTube channel. | Download free 3D printable STL models | [
"vase",
"spiralvase",
"flowervase"
] | Art & Design > Sculptures | [
"252190/images/image_1_compressed.jpg"
] | [
"252190/stls/Cross-Cut Spiral Vase.stl",
"252190/stls/Diamond-Cut Vase (Cage Mode).stl",
"252190/stls/Diamond-Cut Vase.stl",
"252190/stls/Low-Poly Spiral Vase.stl",
"252190/stls/Ribbed Profile Vase.stl",
"252190/stls/Simple Vase.stl",
"252190/stls/Slender Cross-Cut Spiral Vase.stl",
"252190/stls/Slend... | CC-BY | https://www.printables.com/model/252190 | data_0037.tar |
715727 | Vase for Lego Bouquets | <p>There are several versions of the vase, the original full sized version of the model which is 228.6mm tall, yes this is a weirds number and honestly I don't remember why I decided on this specific number and I don't currently feel like changing it. </p><p>Then there is the short version that is 160mm (ah yes a ... | [
"vase",
"lego"
] | Art & Design > Other Art & Designs | [
"715727/images/image_1_compressed.jpg",
"715727/images/image_2_compressed.jpg"
] | [
"715727/stls/Vase.stl",
"715727/stls/Vase_Short.stl",
"715727/stls/Vase_Short_Solid.stl",
"715727/stls/Vase_Solid.stl"
] | CC-BY | https://www.printables.com/model/715727 | data_0037.tar |
76458 | Vase Low Poly Abstract Design | <p>Since I'm totally into the vase mode, I've designed a few vases in Fusion360 and am excited to share them with you as well.<br> </p><p>This vase gets more open at the top, is slightly twisted and has a nice low poly design.</p><p> </p><p><strong>Size:</strong> 118mm wide and 125mm high</p><p><strong>Nozzle... | [
"vase",
"lowpoly",
"lowpolyvase"
] | Household > Home Decor | [
"76458/images/image_1_compressed.jpg",
"76458/images/image_2_compressed.jpg",
"76458/images/image_3_compressed.jpg"
] | [
"76458/stls/Vase_Low_Poly_Abstract_Design.stl"
] | CC-BY | https://www.printables.com/model/76458 | data_0037.tar |
76461 | Vase Low Poly Triangle Design | <p>Since I'm totally into the vase mode, I've designed a few vases in Fusion360 and am excited to share them with you as well.<br> </p><p>This vase gets more open at the top, is slightly twisted and has a chic triangle pattern.</p><p> </p><p><strong>Size:</strong> 118mm wide and 125mm high</p><p><strong>Nozzl... | [
"vase",
"lowpoly",
"lowpolyvase",
"vasemode"
] | Household > Home Decor | [
"76461/images/image_1_compressed.jpg",
"76461/images/image_2_compressed.jpg",
"76461/images/image_3_compressed.jpg"
] | [
"76461/stls/Vase_Low_Poly_Triangle_Design.stl"
] | CC-BY | https://www.printables.com/model/76461 | data_0037.tar |
31833 | Vase Maze Container | <p>maze container designed for spiral vase mode printing.</p>
<p>Height: 14cm<br/>
Diameter: 7cm</p>
<h3>Print instructions</h3><p>the design can be printed in any material.<br/>
be aware to position the models correct, as can be seen in the picture.</p>
<p>Happy Printing!!!</p> | [
"vase",
"container",
"maze",
"vasemode",
"spiralvase",
"spiralvasemode"
] | Toys & Games > Puzzles & Brain-teasers | [
"31833/images/image_1_compressed.jpg",
"31833/images/image_2_compressed.jpg",
"31833/images/image_3_compressed.jpg",
"31833/images/image_4_compressed.jpg",
"31833/images/image_5_compressed.jpg"
] | [
"31833/stls/Vase_Maze_Bottom.stl",
"31833/stls/Vase_Maze_Top.stl"
] | CC-BY | https://www.printables.com/model/31833 | data_0037.tar |
114914 | Vase Mode 120mm Fan Solder Fume Extractor | <p>I wasn't satisfied with the other 3D printable designs out there for a 120mm PC fan based soldering station fume extractor fan. I felt they'd take too long to print and/or use too much plastic. Thus, I decided to leverage some of the structural rigidity tricks I've come up with when using vase mode printing to meet ... | [
"soldering",
"vasemode",
"fumeextractor",
"12vdc",
"120mmfan",
"spiralizedvasemode",
"solderfumeextractor"
] | Hobby & Makers > Electronics | [
"114914/images/image_1_compressed.jpg",
"114914/images/image_2_compressed.jpg",
"114914/images/image_3_compressed.jpg",
"114914/images/image_4_compressed.jpg"
] | [
"114914/stls/fumexBack.stl",
"114914/stls/fumexFrontVaseMode.stl"
] | CC-BY | https://www.printables.com/model/114914 | data_0037.tar |
136718 | Vase mode AA/AAA battery stand | <p>Two simple stands, one holds 8 AAA batteries, another 16 AA batteries. Both print in vase mode.</p> | [] | Household > Other House Equipment | [
"136718/images/image_1_compressed.jpg",
"136718/images/image_2_compressed.jpg",
"136718/images/image_3_compressed.jpg"
] | [
"136718/stls/battery stand.stl"
] | CC-BY | https://www.printables.com/model/136718 | data_0037.tar |
148579 | Vase mode avocado boat | <h3>Print Instruction:</h3><p> </p><p><strong>UPDATED: </strong>v2 removed the chamfer at the bottom of the boat, it should print better </p><p>Minimum <strong>5</strong> bottom solid layer<br>Also to ensure the print doesn't have water leakage, I recommend <strong>reduce the print speed for the infill</stro... | [
"plant",
"planter",
"garden",
"avocado",
"vasemode",
"avocadoboat"
] | Household > Outdoor & Garden | [
"148579/images/image_1_compressed.jpg",
"148579/images/image_2_compressed.jpg",
"148579/images/image_3_compressed.jpg"
] | [
"148579/stls/Avocado boat v2.stl",
"148579/stls/Avocado boat.stl"
] | CC0 | https://www.printables.com/model/148579 | data_0037.tar |
30472 | Vase Mode Battery Holder - 16xAA or 16xAAA | <p>model made for spiral vase mode, can contain 16 AA or AAA batteries.</p>
<h3>Print instructions</h3><p>can be printed in any material with any nozzle, the model is made for 0.6mm nozzle so if it is printed with smaller nozzles, the tolerances might be a bit loose.</p>
<p>Happy Printing!!!</p> | [
"vase",
"battery",
"vasemode",
"spiralvase",
"spiralvasemode",
"nosupport",
"batteryholder",
"nosupportneeded",
"aabattery",
"aabatteryholder",
"aaabattery",
"aaabatteryholder",
"nosupportsneeded",
"aaabatterystorage",
"aabatterystorage",
"batterystorage",
"nosupports"
] | Hobby & Makers > Organizers | [
"30472/images/image_1_compressed.jpg",
"30472/images/image_2_compressed.jpg",
"30472/images/image_3_compressed.jpg",
"30472/images/image_4_compressed.jpg",
"30472/images/image_5_compressed.jpg"
] | [
"30472/stls/battery_holder_template_mk1_aa.stl",
"30472/stls/battery_holder_template_mk1_aaa.stl"
] | CC-BY | https://www.printables.com/model/30472 | data_0037.tar |
302865 | Vase Mode Box | Quick to print box, uses minimal filament.
Snap fit hinge, secures the lid in place.
Feel free to copy the design! | Download free 3D printable STL models | [
"vase",
"box",
"storagebox",
"vasemode"
] | Hobby & Makers > Organizers | [
"302865/images/image_1_compressed.jpg",
"302865/images/image_2_compressed.jpg",
"302865/images/image_3_compressed.jpg"
] | [
"302865/stls/Base.stl",
"302865/stls/Lid.stl"
] | CC0 | https://www.printables.com/model/302865 | data_0037.tar |
105633 | Vase Mode Christmas Tree for Tea Lights | <p>Christmas tree decor, two different sizes</p><p>Print in <strong>Vase mode</strong></p><p>0.2mm layer height</p> | [
"decoration",
"christmas",
"decor",
"home",
"ornament",
"christmasornament",
"christmasdecoration",
"christmastree",
"holiday"
] | Household > Home Decor | [
"105633/images/image_1_compressed.jpg",
"105633/images/image_2_compressed.jpg",
"105633/images/image_3_compressed.jpg"
] | [
"105633/stls/ChristmasTree-01.stl",
"105633/stls/ChristmasTree-02.stl"
] | CC0 | https://www.printables.com/model/105633 | data_0037.tar |
260840 | Vase mode container - Easy snap on lid - Filament saver, less is better | <p>As there was the contest for new container designs I decided not to do the #1000 modular organizer container with fancy lid design, which can be bought for a fraction of the filament costs in a discount store, but to utilize the <strong>vase mode</strong> feature to create a <strong>filament saving container</strong... | [
"container",
"storagecontainer"
] | Hobby & Makers > Organizers | [
"260840/images/image_1_compressed.jpg",
"260840/images/image_2_compressed.jpg",
"260840/images/image_3_compressed.jpg"
] | [
"260840/stls/Container_Lid_printorientation.stl",
"260840/stls/Container_Vasemode-Container.stl"
] | CC0 | https://www.printables.com/model/260840 | data_0037.tar |
549538 | Vase Mode Desiccant Box | <p>I'm finally moving away from gallon ziplock bags and storing my filament in 20qt Sterlite gasket boxes. I needed a bunch of (at least a dozen) desiccant boxes, and while there's tons of models out there, they're not exactly efficient to print. Most larger boxes were computing at 2+ hours to print, even o... | [
"drybox",
"vasemode",
"filamentstorage",
"desiccant"
] | 3D Printers > Accessories | [
"549538/images/image_1_compressed.jpg",
"549538/images/image_2_compressed.jpg"
] | [
"549538/stls/VaseModeDesiccantBox.stl",
"549538/stls/VaseModeDesiccantLid.stl"
] | CC-BY | https://www.printables.com/model/549538 | data_0037.tar |
550508 | Vase Mode Desiccant Container for the Bambu Lab AMS | <p>What makes this AMS desiccant container better than the dozens of others out there? Vase mode! In sport mode you can print the container and lid in about 30min using only 9.5g of material. Fits perfectly in the AMS with both the stock tray and the Hydra upgrade tray.</p><p> </p><p>Print the tw... | [
"drybox",
"desiccant",
"bambu",
"bambulab",
"bambulabx1carbonams",
"bambulabx1ams",
"ams",
"p1p",
"p1s"
] | 3D Printers > Accessories | [
"550508/images/image_1_compressed.jpg",
"550508/images/image_2_compressed.jpg",
"550508/images/image_3_compressed.jpg"
] | [
"550508/stls/AMS_Container_VaseMode.stl",
"550508/stls/AMS_Lid_VaseMode.stl"
] | CC-BY | https://www.printables.com/model/550508 | data_0037.tar |
857190 | vase mode dice tower (72g) with dice storage | <p>This dice tower round I wanted to participate, but I wanted to make a dice tower in vase mode for low filament usage (72g) and for the additional challenge of designing such a tower with the limitations that come with vase mode. I am quite happy with the result :)</p><p>The small roof is also is the lid for a tube i... | [
"dicetower",
"dice"
] | Toys & Games > Board Games | [
"857190/images/image_1_compressed.jpg",
"857190/images/image_2_compressed.jpg",
"857190/images/image_3_compressed.jpg"
] | [
"857190/stls/dice tower vase floor.stl",
"857190/stls/dice tower vase roof.stl",
"857190/stls/dice tower vase.stl"
] | CC-BY | https://www.printables.com/model/857190 | data_0037.tar |
501938 | Vase mode flower | <p>I saw <a href="https://www.printables.com/model/131488-spiral-vase-rose">this</a> model and i liked how it used the spiral/vase mode and i wanted to give it a try so i made this flower.</p><p><strong>The model meant to be printed in vase / spiral mode!</strong></p><p>You can enable spiral / vase mode by ticking:</p>... | [
"vase",
"decoration",
"plant",
"flower",
"decor",
"spiral",
"gift",
"home",
"rose",
"mode",
"girl",
"plants",
"valentine",
"mothersday",
"girlfriend"
] | Art & Design > Other Art & Designs | [
"501938/images/image_1_compressed.jpg",
"501938/images/image_2_compressed.jpg",
"501938/images/image_3_compressed.jpg"
] | [
"501938/stls/Straight.stl",
"501938/stls/Twisted.stl"
] | CC-BY | https://www.printables.com/model/501938 | data_0037.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.