model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
892616 | Age of Empires II West European Keep | <p>Simple repair of the original file that had problems with the pedestals under the lions.</p><h3> </h3> | [
"ageofempires2",
"ageofempires"
] | Tabletop Miniatures > Props & Terrains | [
"892616/images/image_1_compressed.jpg"
] | [
"892616/stls/keep.stl"
] | CC-BY | https://www.printables.com/model/892616 | data_0041.tar |
104162 | Agents of SHIELD Coaster | <p>Hi,<br/>
this is coaster with Agents of S.H.I.E.L.D logo. The black and white parts are printed separately and then glued together. The black inlay is smaller by 0.15mm, it should be enough for well tunned printer. In case of problems use file to remove overhangs.</p>
<h3> Print Settings</h3>
<p><strong>Printer Bra... | [
"coaster",
"thingiverse",
"agentsofshield"
] | Hobby & Makers > Other Ideas | [
"104162/images/image_1_compressed.jpg",
"104162/images/image_2_compressed.jpg"
] | [
"104162/stls/ASC_Black.stl",
"104162/stls/ASC_White.stl"
] | CC-BY | https://www.printables.com/model/104162 | data_0041.tar |
353830 | Aimant Logo Batman | <p><strong>Notes d'impression</strong></p><ul><li>Il faut absolument mettre une bordure. Je ne l'ai pas fait pensant que cela ne serait pas trop grave et homogène. Résultat : Celle-ci est énorme côté axe Z à cause de la pause d'impression pour l'insertion de l'aimant, car la ventilation a refroidi très vite la zone sui... | [
"batman",
"magnet",
"freecad",
"aimant"
] | Household > Home Decor | [
"353830/images/image_1_compressed.jpg"
] | [
"353830/stls/aimant_batman.stl"
] | GPL3.0 | https://www.printables.com/model/353830 | data_0041.tar |
357359 | AIO Calibration Cube | <p>XYZ measurement : 30mm</p><p>Skew measurement : 40mm</p><p><a href="https://www.klipper3d.org/Skew_Correction.html">https://www.klipper3d.org/Skew_Correction.html</a></p><p> </p><p> </p><p><i>"If you ever design and share something, please allow people to enhance it, share the step file.”</i></p> | [
"test",
"calibration",
"cube",
"correction",
"skew",
"tolerence"
] | 3D Printers > Test Models | [
"357359/images/image_1_compressed.jpg",
"357359/images/image_2_compressed.jpg",
"357359/images/image_3_compressed.jpg"
] | [
"357359/stls/30mm_Calibration_Cube.stl"
] | CC0 | https://www.printables.com/model/357359 | data_0041.tar |
184765 | Air assist pressure filter using pop bottle | <p>So your K40 has a brand new air assist and its supplied from a noisy piston type air pump. The air flow is pulsed and vibrates the lens and makes a noise.</p><p>This simple device filters those pulses out to smooth the airflow. Pulsed air may be better than smooth airflow, some pulsing may help clear the cut line? T... | [
"filter",
"k40",
"thingiverse",
"fishtank",
"airassist",
"aeration",
"inlineairfilter",
"pulsefilter",
"smoothairflow"
] | Hobby & Makers > Other Ideas | [
"184765/images/image_1_compressed.jpg",
"184765/images/image_2_compressed.jpg",
"184765/images/image_3_compressed.jpg",
"184765/images/image_4_compressed.jpg",
"184765/images/image_5_compressed.jpg",
"184765/images/image_6_compressed.jpg"
] | [
"184765/stls/Bottle Cap with 10mm Ports.stl",
"184765/stls/Cap_needs_gasket.stl",
"184765/stls/Short_Cap_internal_seal.stl"
] | CC-BY | https://www.printables.com/model/184765 | data_0041.tar |
122827 | Air Compressor Blow Gun Rubber Tip to Boston Valve Adapter | <p>In a moment of panic, I was scrambling to inflate my kids pool during a heatwave, but I didn't have anything to inflate the pool. I had my air compressor which could obviously get the job done, but my blow gun attachment was way too small to interface with the larger Boston Valve of the pool. So, I printed this adap... | [
"inflatable",
"valve",
"adapter",
"pool",
"inflate",
"airtank"
] | Hobby & Makers > Tools | [
"122827/images/image_1_compressed.jpg",
"122827/images/image_2_compressed.jpg",
"122827/images/image_3_compressed.jpg"
] | [
"122827/stls/Boston Valve to Air Compressor Blow Gun Adapter.stl"
] | GPL2.0 | https://www.printables.com/model/122827 | data_0041.tar |
164696 | Air Conditioner | <p>This model has no real purpose. It was meant as a joke gift. I had originally posted it on cults and for some reason actually had quite a few visits and downloads. Thought I'd share it here too.</p> | [
"gift",
"airconditioner",
"gaggift"
] | Household > Other House Equipment | [
"164696/images/image_1_compressed.jpg"
] | [
"164696/stls/ac.stl"
] | CC-BY | https://www.printables.com/model/164696 | data_0041.tar |
1317698 | Air duct adapter for Prusa CORE One | <p>Air hose diameter: <strong>100mm</strong></p><p>The pipe has a 100mm diameter at its widest point and a taper angle of 1°.<br>Pull hose over the edge to the back part of the adaptor for more grip.</p><p>This is certainly optimizable (F3D file attached), but it worked for me on the first try.</p><p>Non-printable hard... | [
"prusa",
"adapter",
"airduct",
"coreone"
] | 3D Printers > Prusa Parts & Upgrades | [
"1317698/images/image_1_compressed.jpg",
"1317698/images/image_2_compressed.jpg"
] | [
"1317698/stls/Air duct adapter.stl"
] | CC0 | https://www.printables.com/model/1317698 | data_0041.tar |
399159 | Air Duct Anycubic Kobra NEO https://youtu.be/SO7tb6E8yHc | <p>Air Duct Anycubic Kobra NEO</p><figure class="media"><oembed url="https://youtu.be/SO7tb6E8yHc"></oembed></figure><p>V4 is slip on secure with glue.</p><p>V5 has a hole for a 2.85 x 11mm screw.</p> | [] | 3D Printers > Anycubic Parts & Upgrades | [
"399159/images/image_1_compressed.jpg",
"399159/images/image_2_compressed.jpg",
"399159/images/image_3_compressed.jpg",
"399159/images/image_4_compressed.jpg"
] | [
"399159/stls/duct exstender kobra neo.rsdoc V4.stl",
"399159/stls/duct exstender kobra neo.rsdoc V5.stl"
] | CC0 | https://www.printables.com/model/399159 | data_0041.tar |
175431 | Air filter | <p>Air filter based on the <a href="https://github.com/nevermore3d/Nevermore_Micro">Nevermore Micro</a>. Optimized for ease of printing and assembly.</p><p>The vent is printed as a separate part, and flat, so it can be popped into the plenum and cartridge.</p><p> </p><p><strong>Source files:</strong></p><ul><li>On... | [
"filter",
"fume",
"fan",
"fumeextractor",
"railcore",
"railcore2",
"railcore300zl",
"railcore300zlt",
"airfilter",
"fumecontrol",
"fumefilter",
"carbonfilter",
"voron",
"fumes",
"railcore300",
"voron24",
"nevermore"
] | 3D Printers > Other Printer Parts & Upgrades | [
"175431/images/image_1_compressed.jpg",
"175431/images/image_2_compressed.jpg",
"175431/images/image_3_compressed.jpg",
"175431/images/image_4_compressed.jpg",
"175431/images/image_5_compressed.jpg",
"175431/images/image_6_compressed.jpg"
] | [
"175431/stls/Air filter - Cartridge Lid.stl",
"175431/stls/Air filter - Cartridge.stl",
"175431/stls/Air filter - Plenum Lid.stl",
"175431/stls/Air filter - Plenum.stl",
"175431/stls/Air filter - Vent.stl"
] | GPL3.0 | https://www.printables.com/model/175431 | data_0041.tar |
287140 | Air Force Challenge Coin | <p>A simple challenge coin sized print with the Air Force logo. I mostly made it so I could play around with making MMU2S compatible models, as such the coin is in 3 parts, the base, the logo and the ring. I also included a version that is printable as a single color for non-mmu printers. </p> | [
"coin",
"mmu2",
"usaf",
"airforce",
"challengecoin"
] | Hobby & Makers > Other Ideas | [
"287140/images/image_1_compressed.jpg"
] | [
"287140/stls/Logo Joined.stl",
"287140/stls/MMU-Base.stl",
"287140/stls/MMU-Logo.stl",
"287140/stls/MMU-Ring.stl"
] | CC-BY | https://www.printables.com/model/287140 | data_0041.tar |
85333 | Air Intake Regulator Cap for Miele Artico | <p>Air intake regulator cap for the Miele Artico (HS05).</p><p>This is a replacement of the original cap which was getting loose and always falling apart.<br>I started printing with transparent PETG but result was so good that I did not change to black PETG :-).</p><p>Best print can be achieved when printing with suppo... | [
"miele",
"mielestaubsauger",
"mielevacuumadaptor"
] | Household > Other House Equipment | [
"85333/images/image_1_compressed.jpg",
"85333/images/image_2_compressed.jpg",
"85333/images/image_3_compressed.jpg",
"85333/images/image_4_compressed.jpg"
] | [
"85333/stls/cover.stl"
] | CC-BY | https://www.printables.com/model/85333 | data_0041.tar |
1582163 | Air Jordan 1 Keychain | <p>Air Jordan 1 Keychain</p><ul><li><p>Only 3gr of filament</p></li><li><p>Under 20min</p></li><li><p>Really cool</p></li></ul><p></p> | [
"airjordan",
"jordani",
"jordan",
"jordan1",
"jordanbox",
"jordanairlamp",
"jordanlamp",
"jordanone",
"jordan4",
"jordans",
"jordanlogo",
"jordanair",
"airjordanshoe",
"aj1",
"jordana",
"airjordan1",
"a1j"
] | Art & Design > 2D Plates & Logos | [
"1582163/images/image_1_compressed.jpg",
"1582163/images/image_2_compressed.jpg",
"1582163/images/image_3_compressed.jpg",
"1582163/images/image_4_compressed.jpg",
"1582163/images/image_5_compressed.jpg"
] | [
"1582163/stls/jordan 1 keychain.stl"
] | CC0 | https://www.printables.com/model/1582163 | data_0041.tar |
126146 | Air Jordan III pen holder | <p>End Caps for Open V-Slot 2020 with Open Hardware logo.</p>
<p>This is a remix from <a href="https://www.thingiverse.com/thing:398515">https://www.thingiverse.com/thing:398515</a></p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p><p class="detail-setting printer"><strong>Prin... | [
"art",
"sneakers",
"penholder",
"pencilholder",
"thingiverse",
"nba",
"basketball",
"nike",
"sneaker",
"airjordan",
"jordan"
] | Household > Office | [
"126146/images/image_1_compressed.jpg"
] | [
"126146/stls/jordan_3_penholder.stl"
] | CC-BY | https://www.printables.com/model/126146 | data_0041.tar |
278059 | Air jordan logo keychain | <p>print with 100% infill, no supports</p> | [
"keychain",
"hole",
"jordan",
"nikeairjordan"
] | Toys & Games > Action Figures & Statues | [
"278059/images/image_1_compressed.jpg",
"278059/images/image_2_compressed.jpg"
] | [
"278059/stls/jordan-logo.stl"
] | CC0 | https://www.printables.com/model/278059 | data_0041.tar |
242821 | Air Plant Holder / Vase | <p>Hello everyone! (ツ)╯</p><p>I designed this vase for air plants, with a lattice like structure. This particulare type of plant does grows on tree branches without the need for soil. In order to avoid the growth of fungi, this plant must be well ventilated.<br>The vase consists of two parts; the vase (Fig.: (C, 2)) an... | [
"structure",
"vase",
"present",
"planter",
"air",
"lattice",
"latticemodel",
"houseplants",
"airplant",
"pteg"
] | Household > Home Decor | [
"242821/images/image_1_compressed.jpg",
"242821/images/image_2_compressed.jpg",
"242821/images/image_3_compressed.jpg",
"242821/images/image_4_compressed.jpg"
] | [
"242821/stls/Vase.stl",
"242821/stls/Vase_Adapter.stl"
] | CC0 | https://www.printables.com/model/242821 | data_0041.tar |
133252 | Air Pruifier with 140mm Fan | <p>I have designed this air purifier for my network cabinet turned printer enclosure. It uses an activated charcoal mat and a HEPA filter to remove any unwanted organic compounds and ultra fine particles from the printing process.</p><p>It is important to use a pressure optimized fan, otherwise the airflow will be too ... | [
"air",
"hepa",
"hepafilter",
"activatedcarbon",
"airpurifier",
"charcoal"
] | 3D Printers > Accessories | [
"133252/images/image_1_compressed.jpg",
"133252/images/image_2_compressed.jpg",
"133252/images/image_3_compressed.jpg",
"133252/images/image_4_compressed.jpg",
"133252/images/image_5_compressed.jpg",
"133252/images/image_6_compressed.jpg"
] | [
"133252/stls/Filterhalter.stl",
"133252/stls/Filterhalter_Matte.stl"
] | CC-BY | https://www.printables.com/model/133252 | data_0041.tar |
841461 | Air Pruning Seedling/Seed Starter Tray for Spiral Vase | <p>These parts are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. <a href="https://www.amazon.com/3D-Printer-Prusa/s?k=3D+Printer+Prusa&linkCode=ll2&tag=thingiverse09-20&linkId=28c787aef7c5a20cf2004b821dd161bf&language=en_US&ref_=... | [
"spiral",
"garden",
"seed",
"plants",
"spiralvase",
"seedling",
"seedstarter"
] | Household > Outdoor & Garden | [
"841461/images/image_1_compressed.jpg",
"841461/images/image_2_compressed.jpg",
"841461/images/image_3_compressed.jpg",
"841461/images/image_4_compressed.jpg"
] | [
"841461/stls/Seed Tray - 2x2 32mm Cells.stl",
"841461/stls/Seed Tray - 2x2 42mm Cells.stl",
"841461/stls/Seed Tray - 2x2 64mm Cells.stl",
"841461/stls/Seed Tray - 2x2 85mm Cells.stl",
"841461/stls/Seed Tray - Single 100mm Square Cell.stl",
"841461/stls/Seed Tray - Single 85mm Cell.stl"
] | CC0 | https://www.printables.com/model/841461 | data_0041.tar |
50229 | Air quality sensor case D1 Mini | <p>A remix of my air quality sensor case for the WeMos D1 mini with BME680. This case is a little bit smaller than the original one. I also used screws instead of the slide mechanism. I adjusted this sensor for Jordan, who kindly ask me for help. Unfortunately, I don't have a D1 mini and not the same BME680 model. So I... | [
"air",
"d1mini",
"quality",
"esp",
"airquality",
"bme680"
] | Hobby & Makers > Electronics | [
"50229/images/image_1_compressed.jpg",
"50229/images/image_2_compressed.jpg",
"50229/images/image_3_compressed.jpg",
"50229/images/image_4_compressed.jpg",
"50229/images/image_5_compressed.jpg",
"50229/images/image_6_compressed.jpg",
"50229/images/image_7_compressed.jpg",
"50229/images/image_8_compres... | [
"50229/stls/bottom-ESP32-30mm-width.stl",
"50229/stls/bottom-ESP32-31mm-width.stl",
"50229/stls/bottom-ESP8266.stl",
"50229/stls/top.stl"
] | CC0 | https://www.printables.com/model/50229 | data_0041.tar |
47612 | Air quality sensor case ESP32 | <p>Air quality sensor case for ESP32</p>
<p>I designed this case for an ESP32 LOLIN32 witch sends the air quality to my home automation server (Loxone). I added two separate sensors to measure air quality in my living room, the MHZ-19 for the CO2 measurements, and a Bosh BME680 for the overall air quality. I also added... | [
"esp32",
"co2",
"airquality",
"bme680",
"mhz19"
] | Hobby & Makers > Electronics | [
"47612/images/image_1_compressed.jpg"
] | [
"47612/stls/bottom.stl",
"47612/stls/top.stl"
] | CC0 | https://www.printables.com/model/47612 | data_0041.tar |
256374 | Air tag case for 3/4 in Strap or Dog Collar | <p>Wanted an air tag case to put on a dog collar that:</p><ul><li>Securely held the air tag</li><li>Securely attached to the collar </li><li>Has a small, rounded profile that won't be too big on the collar</li></ul><p> </p><p>What I came up with was a model that uses 2mm (M2*6) screws to hold the air tag and ... | [
"airtag",
"dogcollar"
] | Household > Pets | [
"256374/images/image_1_compressed.jpg",
"256374/images/image_2_compressed.jpg"
] | [
"256374/stls/AirTag Reg Bottom.stl",
"256374/stls/AirTag Reg Top.stl"
] | CC-BY | https://www.printables.com/model/256374 | data_0041.tar |
338766 | Air Ventilation Check Valve / Zpětná klapka do ventilace 125mm | <p>Printed from PET-G due to higher strength and UV protection.</p><p>Use string of filament as the rotation axis of the flap. fasten ends in prepared holes with a soldering iron. </p><p>Jako osa otáčení je použit kus filamentu. Konce jsou roztaveny páječkou a namáčknuty do rozšířené díry. </p> | [
"air",
"ventilation",
"reverse",
"klapka",
"checkvalve"
] | Household > Other House Equipment | [
"338766/images/image_1_compressed.jpg",
"338766/images/image_2_compressed.jpg",
"338766/images/image_3_compressed.jpg"
] | [
"338766/stls/ZpetnaKlapka (1).stl",
"338766/stls/ZpetnaKlapka (2).stl",
"338766/stls/ZpetnaKlapka.stl"
] | CC-BY | https://www.printables.com/model/338766 | data_0041.tar |
350125 | Air-Vent Deflector (Vase Mode) | <p>This is a vase-mode (single-wall) print for a ceiling air vent. Just take some magnets and stick it to the vent.</p><p>I have even printed this using LW-PLA to make it super light.</p><h4>Slicer Settings</h4><p>Wall Line Count: 1<br>Top Layers: 1<br>Bottom Layers: 2<br>Infill Density: 0.0</p><p>Surface Mode: B... | [
"cover",
"airvent",
"diverter",
"ventcover",
"airdeflector"
] | Household > Other House Equipment | [
"350125/images/image_1_compressed.jpg",
"350125/images/image_2_compressed.jpg"
] | [
"350125/stls/Vent Deflector x v9.stl"
] | CC-BY | https://www.printables.com/model/350125 | data_0041.tar |
474689 | Airbrush clip stick stand | <p>small stand for you clip sticks, fits the usual metal sticks as well as the thicker bamboo sticks</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>I3 MK3S</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="d... | [
"holder",
"stand",
"clip",
"building",
"airbrush",
"thingiverse",
"gunpla",
"gundam",
"modelkit"
] | Hobby & Makers > Tools | [
"474689/images/image_1_compressed.jpg",
"474689/images/image_2_compressed.jpg"
] | [
"474689/stls/PinStand.stl"
] | CC-BY | https://www.printables.com/model/474689 | data_0041.tar |
544969 | Airbrush organizer | <p>Quick print no supports needed</p> | [
"stand",
"supportless",
"airbrush",
"toolsorganizer"
] | 3D Printers > Accessories | [
"544969/images/image_1_compressed.jpg",
"544969/images/image_2_compressed.jpg",
"544969/images/image_3_compressed.jpg"
] | [
"544969/stls/airbrush organizer..stl"
] | CC-BY | https://www.printables.com/model/544969 | data_0041.tar |
46517 | Airbrush paintmix-cup | <p>Cup for mixing paint in.</p>
<h3>Print instructions</h3><h3>Category: Art Tools Summary</h3>
<p>Cup for mixing paint in.</p>
<h3> Print Settings</h3>
<p><strong>Printer:</strong> Da Vinci 1.0A e3d v6 repetier</p>
<p><strong>Rafts:</strong> No</p>
<p><strong>Supports:</strong> No</p>
<p><strong>Resolution:</strong> 0... | [
"cup",
"paint",
"painting",
"airbrush",
"thingiverse",
"colormixing"
] | Hobby & Makers > Tools | [
"46517/images/image_1_compressed.jpg",
"46517/images/image_2_compressed.jpg"
] | [
"46517/stls/blandkopp.stl"
] | CC-BY | https://www.printables.com/model/46517 | data_0041.tar |
399805 | Airbus A320 Keychain | <p>Airbus A320 keychain (Two colour print)</p><ul><li>stl prepared for a two colour print.</li></ul> | [
"keychain",
"llavero",
"airbus",
"airbusa320"
] | Art & Design > 2D Plates & Logos | [
"399805/images/image_1_compressed.jpg"
] | [
"399805/stls/Airbus_KeyChain_V1.stl"
] | CC-BY | https://www.printables.com/model/399805 | data_0041.tar |
1447352 | Airless Ball TPU | <p>Es el primer diseño que hago de una pelota, bota super bien, el próximo diseño que estoy haciendo es una canasta de baloncesto mini para la pared.</p><p>Diseñado completamente en SolidWorks, si alguien quiere el diseño en formato SolidWorks , que me lo pida sin problema.</p><figure class="media"><oembed url="https:/... | [
"toy",
"dog",
"pet",
"cat",
"test",
"game",
"ball",
"kids",
"tpu",
"futbol",
"airless",
"pettoy",
"mascota",
"perro",
"gato",
"balon",
"juegos",
"pelota",
"baloncesto"
] | Sports & Outdoor > Indoor Sports | [
"1447352/images/image_1_compressed.jpg",
"1447352/images/image_2_compressed.jpg",
"1447352/images/image_3_compressed.jpg"
] | [
"1447352/stls/airless ball.stl"
] | CC0 | https://www.printables.com/model/1447352 | data_0041.tar |
331055 | Airplane Snowflake Ornament | A Christmas ornament shaped like a snowflake, but made from airplane silhouettes (787s if you＇re curious). | Download free 3D printable STL models | [
"airplane",
"ornament",
"christmasornament"
] | Household > Home Decor | [
"331055/images/image_1_compressed.jpg"
] | [
"331055/stls/Airplane_Ornament.stl"
] | CC0 | https://www.printables.com/model/331055 | data_0041.tar |
135813 | Airpods Pro Airtag case with button and LED access |
<p>Remix of zeaLOG's Airpods Pro case. I added a dimple on the back side so the button can be pressed and a hole and slot on the front so you can see the LED. Works fine with either PETG or PLA.</p>
<h3>Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>Prusa MINI+</p>
<p class="detail-setting rafts"><strong>Ra... | [
"thingiverse"
] | Gadgets > Audio | [
"135813/images/image_1_compressed.jpg",
"135813/images/image_2_compressed.jpg",
"135813/images/image_3_compressed.jpg"
] | [
"135813/stls/AirPods_Pro_Airtag_with_Button_and_LED.stl"
] | CC-BY | https://www.printables.com/model/135813 | data_0041.tar |
334867 | Airpods Pro Gen 2 Case (Wireless Charging Compatable) | <p>This is a case designed for the new AirPods Pro Generation 2</p>
<p>I included three different files. The first one is for flexible filaments only, as it connects the two halves together. The other two files are just the different halves of the case, which can be printed in rigid filament. The tolerances I used were... | [
"apple",
"iphone",
"thingiverse",
"airpods",
"airpodspro"
] | Gadgets > Portable Devices | [
"334867/images/image_1_compressed.jpg",
"334867/images/image_2_compressed.jpg",
"334867/images/image_3_compressed.jpg",
"334867/images/image_4_compressed.jpg",
"334867/images/image_5_compressed.jpg",
"334867/images/image_6_compressed.jpg"
] | [
"334867/stls/APPG2_Bottom1.stl",
"334867/stls/APPG2_Full_Print.stl",
"334867/stls/APPG2_Top.stl"
] | CC-BY | https://www.printables.com/model/334867 | data_0041.tar |
913686 | Airport Toy | <p>Designed for the <a href="https://print.thelmshow.com/pages/2024-christmas-community-print-drive">LM Show 2024 Christmas Community Print Drive.</a></p> | [
"toy",
"plane",
"city",
"show",
"moses",
"planes",
"airport",
"lm",
"loyal",
"lmshow"
] | Toys & Games > Vehicles | [
"913686/images/image_1_compressed.jpg"
] | [
"913686/stls/airport.stl"
] | CC-BY | https://www.printables.com/model/913686 | data_0041.tar |
938205 | Airsoft AR-23 Liberator | <p>Do you like Managed Democracy? Well now you can spread it all over your local airsoft field!</p><p>When I posted the original Backhammer kit for the PLR-16, people brought up its similarity to the Liberator from Helldivers, and suggested that I make it into that. Well I did it, and here it is. I pulled in game model... | [
"we",
"kit",
"airsoft",
"tech",
"liberator",
"gbbr",
"bullpup",
"helldivers2",
"helldivers",
"plr"
] | Sports & Outdoor > Outdoor Sports | [
"938205/images/image_1_compressed.jpg",
"938205/images/image_2_compressed.jpg",
"938205/images/image_3_compressed.jpg",
"938205/images/image_4_compressed.jpg",
"938205/images/image_5_compressed.jpg",
"938205/images/image_6_compressed.jpg"
] | [
"938205/stls/charging handle v3.stl",
"938205/stls/charging rod v32.stl",
"938205/stls/cheek rest v28.stl",
"938205/stls/gas block replacer v1.stl",
"938205/stls/handguard v75.stl",
"938205/stls/left frame v6.stl",
"938205/stls/left trigger arm v2.stl",
"938205/stls/lower handguard v12.stl",
"938205... | CC0 | https://www.printables.com/model/938205 | data_0041.tar |
368880 | Airsoft BB Can / Dispenser / Speedloader / Ammobottle | Airsoft BB Can / Dispenser / Speedloader / Magazine | Download free 3D printable STL models | [
"bottle",
"can",
"ammo",
"dispenser",
"airsoft",
"ammobox",
"airsoftparts",
"airsoftaccesories"
] | Gadgets > Other Gadgets | [
"368880/images/image_1_compressed.jpg",
"368880/images/image_2_compressed.jpg",
"368880/images/image_3_compressed.jpg",
"368880/images/image_4_compressed.jpg",
"368880/images/image_5_compressed.jpg",
"368880/images/image_6_compressed.jpg",
"368880/images/image_7_compressed.jpg",
"368880/images/image_8... | [
"368880/stls/body.stl",
"368880/stls/cover.stl",
"368880/stls/screw.stl"
] | CC-BY | https://www.printables.com/model/368880 | data_0041.tar |
187627 | Airsoft BB Field Carriage |
<p>This is a small BB storage to be carried while on the field.</p>
<p>The design was inspired by this: <a href="https://www.thingiverse.com/thing:2183772">https://www.thingiverse.com/thing:2183772</a> which was made by TherminalMirror.</p>
<p>It holds around 550 BBs.</p>
<p>V2: The body has a nozzle with 7 mm inner... | [
"storage",
"hobby",
"airsoft",
"thingiverse",
"airsoftaccesories",
"6mmairsoft"
] | Sports & Outdoor > Other Sports | [
"187627/images/image_1_compressed.jpg",
"187627/images/image_2_compressed.jpg",
"187627/images/image_3_compressed.jpg",
"187627/images/image_4_compressed.jpg",
"187627/images/image_5_compressed.jpg",
"187627/images/image_6_compressed.jpg",
"187627/images/image_7_compressed.jpg"
] | [
"187627/stls/bottom_cap.stl",
"187627/stls/cover_v2.stl",
"187627/stls/cover_v3.stl",
"187627/stls/main_body_v2.stl",
"187627/stls/main_body_v3.stl"
] | CC-BY | https://www.printables.com/model/187627 | data_0041.tar |
557340 | Airsoft Glock Loader - O.K | <p>Airsoft Glock Loader - O.K</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>CR-X</p></div>
<p><strong>Supports:</strong></p>
<p>No</p>
<p class="detail-setting infill"><strong>Infill: </strong>
<div><p>20</p></div>... | [
"airsoft",
"thingiverse"
] | Toys & Games > Outdoor Toys | [
"557340/images/image_1_compressed.jpg",
"557340/images/image_2_compressed.jpg",
"557340/images/image_3_compressed.jpg",
"557340/images/image_4_compressed.jpg",
"557340/images/image_5_compressed.jpg"
] | [
"557340/stls/glock_loader_-_o.k.stl"
] | CC-BY | https://www.printables.com/model/557340 | data_0041.tar |
1023962 | Airsoft Handle | <p>Airsoft Handle</p> | [] | 3D Printers > Accessories | [
"1023962/images/image_1_compressed.jpg"
] | [
"1023962/stls/Airsoft Handle.stl"
] | CC0 | https://www.printables.com/model/1023962 | data_0041.tar |
206772 | Airtag dog collar mount | [
"dog",
"collar",
"mount",
"apple",
"airtag"
] | Gadgets > Other Gadgets | [
"206772/images/image_1_compressed.jpg"
] | [
"206772/stls/Airtag mount.stl"
] | CC0 | https://www.printables.com/model/206772 | data_0041.tar | |
256214 | airtag keychain rings | [
"ring",
"rings",
"apple",
"keychain",
"airtag",
"airtags",
"airtagkeyring"
] | Gadgets > Portable Devices | [
"256214/images/image_1_compressed.jpg",
"256214/images/image_2_compressed.jpg",
"256214/images/image_3_compressed.jpg"
] | [
"256214/stls/airtag keychain rings v1.stl"
] | CC0 | https://www.printables.com/model/256214 | data_0041.tar | |
65661 | AirTag mount for Xtracycle | <p>Print the model with supports. For installation, you‘ll need two sets of small screws and nuts. The airtag should snap fit into the printed piece. Remove anything installed on the deck and find the small holes that aren’t being used towards the center of the deck. Place the piece + airtag on the underside of the dec... | [
"bike",
"security",
"xtracycle",
"airtag"
] | Sports & Outdoor > Outdoor Sports | [
"65661/images/image_1_compressed.jpg",
"65661/images/image_2_compressed.jpg",
"65661/images/image_3_compressed.jpg",
"65661/images/image_4_compressed.jpg",
"65661/images/image_5_compressed.jpg",
"65661/images/image_6_compressed.jpg"
] | [
"65661/stls/Airtag Bracket.stl"
] | CC-BY | https://www.printables.com/model/65661 | data_0041.tar |
58077 | airy stand for bottles | <p>Around bottles in the shower there tends to be water not drying or flowing around bottles which eventually causes residue. This design is intended to create minimal footprint for bottles to allow good waterflow and aeration allowing for quicker drying and less residue buildup.</p><p>I have printed this in both PLA a... | [
"bottle",
"stand",
"bathroom",
"dry",
"shampoo",
"waterflow"
] | Household > Bathroom | [
"58077/images/image_1_compressed.jpg",
"58077/images/image_2_compressed.jpg"
] | [
"58077/stls/shampoo stand.stl"
] | CC0 | https://www.printables.com/model/58077 | data_0041.tar |
371594 | AK47 keychain | <p>created a ak47 key chain in fusion 360. </p> | [
"keychain",
"guns",
"ak47"
] | Art & Design > Other Art & Designs | [
"371594/images/image_1_compressed.jpg"
] | [
"371594/stls/ak47 v1.stl"
] | GPL3.0 | https://www.printables.com/model/371594 | data_0041.tar |
159161 | Akatsuki Cloud | <p>Prusa Affiliate link: <a href="http://www.prusa3d.com/#a_aid=3090&_ga=2.131302407.92416513.1649804561-827129000.1648682303">http://www.prusa3d.com/#a_aid=3090</a></p><p> </p><p>Feel free to check out my website <a href="https://www.ar3dprints.com/">https://www.ar3dprints.com/</a></p> | [
"cloud",
"naruto",
"landoflightning",
"redcloud",
"raikage",
"hiddenintheclouds"
] | Art & Design > 2D Plates & Logos | [
"159161/images/image_1_compressed.jpg"
] | [
"159161/stls/NarutoCloud.stl",
"159161/stls/NarutoCloudKeychain.stl"
] | CC-BY | https://www.printables.com/model/159161 | data_0041.tar |
1444460 | Akaza Demon Slayer | <p>You can figure it out :) I believe in you!</p> | [
"figurine",
"anime",
"demon",
"figurines",
"demonslayer",
"demonslayerfanart",
"figurineshelf"
] | Toys & Games > Action Figures & Statues | [
"1444460/images/image_1_compressed.jpg",
"1444460/images/image_2_compressed.jpg",
"1444460/images/image_3_compressed.jpg",
"1444460/images/image_4_compressed.jpg",
"1444460/images/image_5_compressed.jpg"
] | [
"1444460/stls/Blue_attack_(1).stl",
"1444460/stls/Blue_attack_(2).stl",
"1444460/stls/Blue_attack_(3).stl",
"1444460/stls/Body_(down).stl",
"1444460/stls/Body_(up).stl",
"1444460/stls/Fog_(1).stl",
"1444460/stls/Fog_(2).stl",
"1444460/stls/Fog_(3).stl",
"1444460/stls/Fog_(4).stl",
"1444460/stls/Fo... | CC-BY | https://www.printables.com/model/1444460 | data_0041.tar |
274328 | Akro Mils Bin With Heat Insert Tip Storage | <p>I made this because I needed a neat place to store my tips, so I figured I'd put them in my heat set insert bin so they're always ready to use! </p><p>The tips I use are these: <a href="https://a.co/d/ckWd5pk">https://a.co/d/ckWd5pk</a></p><p>They should fit any soldering tip that has an outer diameter of 6.5MM... | [
"storage",
"bin",
"heatsetinsert",
"akro",
"akromils",
"mils",
"heatset",
"heatsets"
] | Hobby & Makers > Organizers | [
"274328/images/image_1_compressed.jpg",
"274328/images/image_2_compressed.jpg"
] | [
"274328/stls/AM-Bin-Heat-Insert-Tip-Holder.stl"
] | CC-BY | https://www.printables.com/model/274328 | data_0041.tar |
216238 | Akro Mils Large Divider | <p>Long Divider for the Akro Mils plastic storage bins. Modified the original design of the smaller divider to work with the larger bins. (See photo)</p> | [
"organizer",
"storage",
"divider",
"akromils"
] | Hobby & Makers > Organizers | [
"216238/images/image_1_compressed.jpg",
"216238/images/image_2_compressed.jpg"
] | [
"216238/stls/Akro Long Divider.stl"
] | CC-BY | https://www.printables.com/model/216238 | data_0041.tar |
859547 | Albanian flag key chain | <p>Albanian flag keychain designed in Oneshape. </p><p>Dimensions: 37 mm diameter and 2.8 mm height</p><p><br>Print time is more or less around 26m at 0.16 layer heigh (0.4 mm nozzle).<br>Print time is more or less around 22m at 0.20 layer heigh (0.4 mm nozzle).</p><p><br>Print parameters:</p><ul><li>Layer height ... | [
"keychain",
"flag",
"albania",
"albanianflag"
] | Art & Design > 2D Plates & Logos | [
"859547/images/image_1_compressed.jpg",
"859547/images/image_2_compressed.jpg",
"859547/images/image_3_compressed.jpg",
"859547/images/image_4_compressed.jpg"
] | [
"859547/stls/Albanian_Flag_KC_Multilayer.stl"
] | CC-BY | https://www.printables.com/model/859547 | data_0041.tar |
206290 | Aldi Cart Coin | <p>I made this for my mother in law because she would frequently forget to bring a quarter when shopping at Aldi. </p> | [
"coin",
"shoppingcartcoin"
] | Gadgets > Other Gadgets | [
"206290/images/image_1_compressed.jpg"
] | [
"206290/stls/Aldi Coin.stl"
] | CC-BY | https://www.printables.com/model/206290 | data_0041.tar |
260669 | Alien (U.F.O) | <p>This is a model that I created using Blender. I have based on the photo (uploaded) to create it. I have spent a lot of hours modeling it. If you like it, please give me a like and follow for more figures. If you have any question, please tell me in the comments (I read all these comments).</p><p> </p> | [
"youtube",
"alien",
"aliens",
"ufo",
"thingiverse",
"duodetection",
"marciano"
] | Art & Design > Sculptures | [
"260669/images/image_1_compressed.jpg"
] | [
"260669/stls/cabezaalien.stl"
] | CC-BY | https://www.printables.com/model/260669 | data_0041.tar |
32675 | Alien Bust | <p>concept sculpture of an alien i made for the prusa contest</p>
| [
"alien"
] | Art & Design > Sculptures | [
"32675/images/image_1_compressed.jpg"
] | [
"32675/stls/alien.stl"
] | CC0 | https://www.printables.com/model/32675 | data_0041.tar |
123487 | Alien button | <p>Alien face as a button.</p><p>(Ø30mm | 3mm)</p> | [
"alien",
"button"
] | Fashion > Other Fashion Accessories | [
"123487/images/image_1_compressed.jpg"
] | [
"123487/stls/alien_button.stl"
] | CC-BY | https://www.printables.com/model/123487 | data_0041.tar |
491030 | Alien Coin | <p>Alien Coin</p>
<p>2 inches in diameter</p>
Category: Coins & Badges | [
"coin",
"alien",
"ufo",
"thingiverse",
"balloons"
] | Art & Design > 2D Plates & Logos | [
"491030/images/image_1_compressed.jpg",
"491030/images/image_2_compressed.jpg"
] | [
"491030/stls/Alien_Coin_v1.stl"
] | CC-BY | https://www.printables.com/model/491030 | data_0041.tar |
147994 | Alien Face and Keychain | <p>Prusa Affiliate link: <a href="http://www.prusa3d.com/#a_aid=3090">http://www.prusa3d.com/#a_aid=3090</a></p><p> </p><p>Feel free to check out my website <a href="https://www.ar3dprints.com/">https://www.ar3dprints.com/</a></p> | [
"alien",
"aliens",
"alienwall",
"glowinthedark"
] | Art & Design > 2D Plates & Logos | [
"147994/images/image_1_compressed.jpg",
"147994/images/image_2_compressed.jpg",
"147994/images/image_3_compressed.jpg"
] | [
"147994/stls/AlienMouth.stl",
"147994/stls/AlienNoMouth.stl",
"147994/stls/AlienNomouthKeychain.stl",
"147994/stls/AlienwithmouthKeychain.stl"
] | CC-BY | https://www.printables.com/model/147994 | data_0041.tar |
579469 | Alien Keychain | <p>Started a small keychain journey. Been doing dead by daylight killers to start. Follow for more. Alien made for 2 layer color change. Easy print and multiple fits on MK3 easily. </p> | [
"alien",
"keychain",
"aliens",
"xenomorph"
] | Art & Design > 2D Plates & Logos | [
"579469/images/image_1_compressed.jpg"
] | [
"579469/stls/Alien.stl"
] | CC0 | https://www.printables.com/model/579469 | data_0041.tar |
464018 | Aliens Weyland-Yutani Coaster | <p>Happy Alien Day! We here at Weyland-Yutani Corp are all about "Building better worlds." So here's a Weyland-Yutani coaster for you to set your beverage upon. </p> | [
"coaster",
"alien",
"aliens",
"drinkcoaster",
"weylandyutani"
] | Art & Design > 2D Plates & Logos | [
"464018/images/image_1_compressed.jpg"
] | [
"464018/stls/AlienWeylandYutaniCoaster.stl"
] | CC-BY | https://www.printables.com/model/464018 | data_0041.tar |
843152 | AliExpress Stealth Press Kit Part Remix | <p>I purchased this <a href="https://www.aliexpress.us/item/3256806207710105.html">Stealth Press kit</a> during a sale, and when going to print their modified parts found that some of the modifications made either introduced new requirements for supports or did nothing to address existing issues.</p><p>I've made minor ... | [] | Hobby & Makers > Tools | [
"843152/images/image_1_compressed.jpg"
] | [
"843152/stls/Remix-Stealth_Press-Rectangle_Anchorage_Shoe_1_x1.stl",
"843152/stls/Remix-Stealth_Press-Rectangle_Anchorage_Shoe_2_x1.stl"
] | CC-BY | https://www.printables.com/model/843152 | data_0041.tar |
365140 | All-in-one business card box and holder | <p>all-in-one business card box and holder.</p><p>Designed for business cards that are ~85mm x 55mm.</p><p>idea was, that you can use the box also as stand.</p><p>holds up to 45 cards without any problem.</p><p>No supports needed.</p> | [
"box",
"holder",
"card",
"stand",
"businesscards",
"businesscard",
"business",
"businesscardholder",
"halter",
"businesscardbox",
"visitenkarte",
"visitenkartenhalter",
"visitenkarten",
"visitenkartenbox"
] | Household > Office | [
"365140/images/image_1_compressed.jpg",
"365140/images/image_2_compressed.jpg",
"365140/images/image_3_compressed.jpg",
"365140/images/image_4_compressed.jpg",
"365140/images/image_5_compressed.jpg"
] | [
"365140/stls/Visitenkartenbox v2_part1.stl",
"365140/stls/Visitenkartenbox v2_part2.stl",
"365140/stls/Visitenkartenbox_both parts.stl"
] | CC0 | https://www.printables.com/model/365140 | data_0041.tar |
1048170 | All-new Ring Battery Doorbell 45° Corner Wallmount | <p>I searched for a 45° Wall mount for the new Ring Battery Doorbell. but couldn find one.<br>So i made one :)</p><p>You need some 6mm Woodscrews and some dowels.</p><p>To fix the Baseplate you need Four 13mm x3,5mm Woodsrews.</p><p>You could also insert some Heat inserts and use Metric Screws.</p><p>The Wallmount is d... | [
"ring",
"amazon",
"wallmount",
"adapter",
"45",
"grad",
"degrees",
"ecke",
"dorrbell"
] | Art & Design > Wall-mounted | [
"1048170/images/image_1_compressed.jpg",
"1048170/images/image_2_compressed.jpg",
"1048170/images/image_3_compressed.jpg",
"1048170/images/image_4_compressed.jpg",
"1048170/images/image_5_compressed.jpg",
"1048170/images/image_6_compressed.jpg",
"1048170/images/image_7_compressed.jpg"
] | [
"1048170/stls/Ring_45_Wallmount_v1.0.stl"
] | GPL3.0 | https://www.printables.com/model/1048170 | data_0041.tar |
1210797 | Allen key wall holder Imbus Wand Halter | <p>Can be printed without support with a 0.4 nozzle.<br><br> </p> | [
"holder",
"wallmount",
"allenkey"
] | Hobby & Makers > Tools | [
"1210797/images/image_1_compressed.jpg"
] | [
"1210797/stls/Imbuschlüssel Wandhalterung.stl"
] | CC0 | https://www.printables.com/model/1210797 | data_0041.tar |
524191 | Alligator Head 3D Scan | <p>This is a high-resolution scan of a real alligator head from New Orleans, done on an EinScan SE 3D scanner.</p> | [
"scan",
"head",
"animal",
"alligator",
"nature"
] | World & Scans > Animals | [
"524191/images/image_1_compressed.jpg"
] | [
"524191/stls/alligatorHead_eyesFixed.stl"
] | CC-BY | https://www.printables.com/model/524191 | data_0041.tar |
120046 | Allit Basic 33 / Allit VarioPlus Hobby 33 drawer insert ( Aldi Workzone, Lidl Parkside) Kleinteilemagazin Schublade | <p>The small parts organizer “Basic33” / VarioPlus Hobby 33 (old version with flat frontface) by Allit is often sold via supermarkets like Lidl as a Parkside product and Aldi and Hofer (Austria) as a Workzone product. </p><p>They come with a very simplified drawer and with two separators to create 3 compartments. ... | [
"parkside",
"aldi",
"lidl",
"allit",
"partsorganizer",
"smallpartsorganizer",
"hofer",
"kleinteile",
"varioplus",
"workzone",
"basic33",
"kleinteilemagazin",
"schubladen",
"hobby33"
] | Hobby & Makers > Organizers | [
"120046/images/image_1_compressed.jpg",
"120046/images/image_2_compressed.jpg",
"120046/images/image_3_compressed.jpg"
] | [
"120046/stls/Allit_Drawer Inserts 10x1.stl",
"120046/stls/Allit_Drawer Inserts 12x1.stl",
"120046/stls/Allit_Drawer Inserts 3x1 Diagonal.stl",
"120046/stls/Allit_Drawer Inserts 3x1 lengthwise.stl",
"120046/stls/Allit_Drawer Inserts 4x1 lengthwise.stl",
"120046/stls/Allit_Drawer Inserts 4x1.stl",
"120046... | CC-BY | https://www.printables.com/model/120046 | data_0041.tar |
814340 | Alouttinae Hand Cannon | <p>Something a little more small-arms.</p> | [
"mini",
"hand",
"cannon",
"gun",
"easy",
"pistol",
"remix",
"13",
"dummy",
"lucky",
"133",
"eassy",
"luckky",
"dummmy",
"pistoll"
] | Toys & Games > Action Figures & Statues | [
"814340/images/image_1_compressed.jpg",
"814340/images/image_2_compressed.jpg",
"814340/images/image_3_compressed.jpg"
] | [
"814340/stls/Hand Cannon Armor.stl",
"814340/stls/Hand Cannon Body.stl",
"814340/stls/Handle (3).stl"
] | CC-BY | https://www.printables.com/model/814340 | data_0041.tar |
397967 | Alphabet Letter C | <p>Letter C</p> | [
"alphabet"
] | Learning > Haptic Models | [
"397967/images/image_1_compressed.jpg"
] | [
"397967/stls/C.stl"
] | CC-BY | https://www.printables.com/model/397967 | data_0041.tar |
397965 | Alphabet Letter D | <p>Letter D</p> | [
"alphabet"
] | Learning > Haptic Models | [
"397965/images/image_1_compressed.jpg"
] | [
"397965/stls/D.stl"
] | CC-BY | https://www.printables.com/model/397965 | data_0041.tar |
397948 | Alphabet Letter F | <p>Letter F</p> | [
"alphabet"
] | Learning > Haptic Models | [
"397948/images/image_1_compressed.jpg"
] | [
"397948/stls/F.stl"
] | CC-BY | https://www.printables.com/model/397948 | data_0041.tar |
397947 | Alphabet Letter G | <p>Letter G</p> | [
"alphabet"
] | Learning > Haptic Models | [
"397947/images/image_1_compressed.jpg"
] | [
"397947/stls/G.stl"
] | CC-BY | https://www.printables.com/model/397947 | data_0041.tar |
397944 | Alphabet Letter H | <p>Letter H</p> | [
"alphabet"
] | Learning > Haptic Models | [
"397944/images/image_1_compressed.jpg"
] | [
"397944/stls/H.stl"
] | CC-BY | https://www.printables.com/model/397944 | data_0041.tar |
397942 | Alphabet Letter J | <p>Letter J</p> | [
"alphabet"
] | Learning > Haptic Models | [
"397942/images/image_1_compressed.jpg"
] | [
"397942/stls/J.stl"
] | CC-BY | https://www.printables.com/model/397942 | data_0041.tar |
397931 | Alphabet Letter Q | <p>Letter Q</p> | [
"alphabet"
] | Learning > Haptic Models | [
"397931/images/image_1_compressed.jpg"
] | [
"397931/stls/Q.stl"
] | CC-BY | https://www.printables.com/model/397931 | data_0041.tar |
397930 | Alphabet Letter R | <p>Letter R</p> | [
"alphabet"
] | Learning > Haptic Models | [
"397930/images/image_1_compressed.jpg"
] | [
"397930/stls/R.stl"
] | CC-BY | https://www.printables.com/model/397930 | data_0041.tar |
397926 | Alphabet Letter T | <p>Letter T</p> | [
"alphabet"
] | Learning > Haptic Models | [
"397926/images/image_1_compressed.jpg"
] | [
"397926/stls/T.stl"
] | CC-BY | https://www.printables.com/model/397926 | data_0041.tar |
397925 | Alphabet Letter U | <p>Letter U</p> | [
"alphabet"
] | Learning > Haptic Models | [
"397925/images/image_1_compressed.jpg"
] | [
"397925/stls/U.stl"
] | CC-BY | https://www.printables.com/model/397925 | data_0041.tar |
397920 | Alphabet Letter W | <p>Letter W</p> | [
"alphabet"
] | Learning > Haptic Models | [
"397920/images/image_1_compressed.jpg"
] | [
"397920/stls/W.stl"
] | CC-BY | https://www.printables.com/model/397920 | data_0041.tar |
397917 | Alphabet Letter X | <p>Letter X</p> | [
"alphabet"
] | Learning > Haptic Models | [
"397917/images/image_1_compressed.jpg"
] | [
"397917/stls/X.stl"
] | CC-BY | https://www.printables.com/model/397917 | data_0041.tar |
397915 | Alphabet Letter Y | <p>Letter Y</p> | [
"alphabet"
] | Learning > Haptic Models | [
"397915/images/image_1_compressed.jpg"
] | [
"397915/stls/Y.stl"
] | CC-BY | https://www.printables.com/model/397915 | data_0041.tar |
398020 | Alphabet Number 2 | <p>Number 2</p> | [
"alphabet"
] | Learning > Haptic Models | [
"398020/images/image_1_compressed.jpg"
] | [
"398020/stls/2.stl"
] | CC-BY | https://www.printables.com/model/398020 | data_0041.tar |
398012 | Alphabet Number 5 | <p>Number 5</p> | [
"alphabet"
] | Learning > Haptic Models | [
"398012/images/image_1_compressed.jpg"
] | [
"398012/stls/5.stl"
] | CC-BY | https://www.printables.com/model/398012 | data_0041.tar |
575293 | Alternative Knobs for FX-4CR Transceiver | <p><strong>Model Notes:</strong></p><p>Two versions are available for each design. </p><p>The tight fit version is mostly solid and will prove to be a tight fit, while the flex version should have some flex around the shaft for easier installation and removal.</p><p> </p><p><strong>Installation Tips:</strong>... | [
"knob",
"hamradio",
"qrp"
] | Hobby & Makers > Electronics | [
"575293/images/image_1_compressed.jpg"
] | [
"575293/stls/Concave Knob - Flex.stl",
"575293/stls/Concave Knob.stl",
"575293/stls/Flat Knob - Flex.stl",
"575293/stls/Flat Knob.stl",
"575293/stls/Half Scallop Knob - Flex.stl",
"575293/stls/Half Scallop Knob.stl",
"575293/stls/Scallop Edge Knob - Flex.stl",
"575293/stls/Scallop Edge Knob.stl"
] | CC0 | https://www.printables.com/model/575293 | data_0041.tar |
269880 | Alternative Spool Holder for Drybox V2 | <p>This is an alternative spoolholder which fits inside Ondrej Stritesky's drybox design. I found the spool rollers along the bottom required metal rods which I didn't have, and it also created a lot of rolling resistance which was too much for TPU and other flexibles. So I deisnged this which slots into the same place... | [
"drybox",
"filamentdrybox"
] | 3D Printers > Accessories | [
"269880/images/image_1_compressed.jpg"
] | [
"269880/stls/SpoolHolder.stl",
"269880/stls/SpoolHolderRod.stl"
] | CC-BY | https://www.printables.com/model/269880 | data_0041.tar |
206653 | Altoids Tall Tin | <p>Easy print to recycle the Altoids Tall Tins</p> | [
"altoids",
"altoidscontainer",
"altoidstin",
"altoidsdivider",
"alto"
] | Gadgets > Other Gadgets | [
"206653/images/image_1_compressed.jpg"
] | [
"206653/stls/Altoids Tall Tin.stl"
] | CC0 | https://www.printables.com/model/206653 | data_0041.tar |
33344 | Aluminium 2020 (20 mm) profile cap/cover | <p>I did not found any cap that fitted snugly, so I designed this simple one. Printed with 30% infill, it fits really well.</p>
| [
"cap",
"cover",
"aluminium",
"thingiverse",
"aluminiumprofile",
"20x20extrusion"
] | 3D Printers > Accessories | [
"33344/images/image_1_compressed.jpg",
"33344/images/image_2_compressed.jpg",
"33344/images/image_3_compressed.jpg",
"33344/images/image_4_compressed.jpg"
] | [
"33344/stls/endcap_2020_new2.stl",
"33344/stls/endcap_2020_new2x6.stl"
] | CC-BY | https://www.printables.com/model/33344 | data_0041.tar |
1200021 | Alzament Cardboar spool adapter | <p>Nevyhovoval mi jiný adaptér, který se s cívkou zadrhával, tak jsem si zkusil udělat vlastní.</p> | [
"adapter",
"alza",
"cardboardspool",
"alzament"
] | 3D Printers > Accessories | [
"1200021/images/image_1_compressed.jpg",
"1200021/images/image_2_compressed.jpg"
] | [
"1200021/stls/spooladapterfinal.stl",
"1200021/stls/spooladapterstl.stl"
] | CC-BY | https://www.printables.com/model/1200021 | data_0041.tar |
1229763 | AM5 CPU 1:1 Model | <p>I needed an exact model and couldn't find one so I made this in Onshape</p> | [
"cpu",
"am5"
] | Gadgets > Computers | [
"1229763/images/image_1_compressed.jpg"
] | [
"1229763/stls/am5.stl"
] | CC-BY | https://www.printables.com/model/1229763 | data_0041.tar |
571389 | Amateur Radio Dipole Antenna, Guy Rope Winder | <p>Designed with the Amateur Radio community in mind. Designed to wind up Antenna Dipole legs to keep them tidy and kink free. Other great uses are for 550 or paracord, kite string, fishing line, etc. it requires any type of elastic cord to be tied thru the eyelites and around the designed in finger to secure contents.... | [
"antenna",
"hamradio",
"amateurradio",
"rope",
"kite",
"550cord",
"550paracord",
"ropewinder"
] | Hobby & Makers > Tools | [
"571389/images/image_1_compressed.jpg",
"571389/images/image_2_compressed.jpg",
"571389/images/image_3_compressed.jpg",
"571389/images/image_4_compressed.jpg",
"571389/images/image_5_compressed.jpg"
] | [
"571389/stls/Guy Winder.stl"
] | CC0 | https://www.printables.com/model/571389 | data_0041.tar |
536771 | Amazing Block vase | <p>This design by <a href="https://www.thingiverse.com/thing:2376777">eggnot</a> blew my mind a little bit. I printed it in CC3D silk green PLA. I used a 0.6mm nozzle with 0.3 Quality layer height. </p><p> </p><p>Please hit the like ♥ and post your make with the “Post A Make” button (below the “DOWNLOAD” butt... | [
"vase",
"blocks"
] | Art & Design > Other Art & Designs | [
"536771/images/image_1_compressed.jpg",
"536771/images/image_2_compressed.jpg"
] | [
"536771/stls/Block Vase.stl"
] | CC-BY | https://www.printables.com/model/536771 | data_0041.tar |
141017 | Amazon Echo Dot (3rd Gen) Stand | <p>Mount the echo with the cable exiting the top and looped back down through the clip. Uses 3 M3 screws, no supports.</p><p>The base can be printed with 20% infill but i would suggest an infill of at least 50% on the echo mount as the arms must flex a little to install the echo.</p> | [] | Gadgets > Audio | [
"141017/images/image_1_compressed.jpg"
] | [
"141017/stls/Echo_Mount_1.stl",
"141017/stls/Echo_Stand_Fixed.stl"
] | CC-BY | https://www.printables.com/model/141017 | data_0041.tar |
879072 | AMD Logo | [
"logo",
"decor",
"amd"
] | Art & Design > 2D Plates & Logos | [
"879072/images/image_1_compressed.jpg"
] | [
"879072/stls/AMD Logo.stl"
] | CC0 | https://www.printables.com/model/879072 | data_0041.tar | |
63965 | Amiga 500 (A500) Display Stand | <p>Display stand for the Amiga 500</p> | [
"amiga",
"commodore",
"amiga500",
"commodoreamiga"
] | Gadgets > Computers | [
"63965/images/image_1_compressed.jpg",
"63965/images/image_2_compressed.jpg",
"63965/images/image_3_compressed.jpg"
] | [
"63965/stls/a500cutout.stl"
] | CC-BY | https://www.printables.com/model/63965 | data_0041.tar |
1403108 | Amiibo Display Stand | <p>I needed a display stand for my Amiibos inside the IKEA Eket so I modelled these stands in different heights. You can arrange them as you please.</p><p>I use an infill of 4% with gyroid. The Amiibos are quite light, so they don't need to be too sturdy.</p> | [
"display",
"stand",
"raiser",
"amiibo"
] | Toys & Games > Other Toys & Games | [
"1403108/images/image_1_compressed.jpg"
] | [
"1403108/stls/amiiboStandA_v001.stl",
"1403108/stls/amiiboStandB_v001.stl",
"1403108/stls/amiiboStandC_v001.stl",
"1403108/stls/amiiboStandD_v001.stl",
"1403108/stls/amiiboStandE_v001.stl"
] | CC-BY | https://www.printables.com/model/1403108 | data_0041.tar |
160845 | Among Us | <p>Feel free to check out my website <a href="https://www.ar3dprints.com/">https://www.ar3dprints.com/</a></p><p> </p><p><a href="http://www.prusa3d.com/#a_aid=3090&_ga=2.197501607.92416513.1649804561-827129000.1648682303">http://www.prusa3d.com/#a_aid=3090</a></p> | [
"game",
"videogames",
"killer",
"amongus",
"sus",
"suspect",
"amoungus"
] | Art & Design > 2D Plates & Logos | [
"160845/images/image_1_compressed.jpg"
] | [
"160845/stls/AmongUs.stl",
"160845/stls/AmongUsKeychain.stl"
] | CC-BY | https://www.printables.com/model/160845 | data_0041.tar |
218478 | Among Us Emergency Button |
<p>This is a remix of the emergency call button by Folime.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Ender 3</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-setting supports"><strong>Supp... | [
"thingiverse",
"amongus"
] | Toys & Games > Outdoor Toys | [
"218478/images/image_1_compressed.jpg",
"218478/images/image_2_compressed.jpg",
"218478/images/image_3_compressed.jpg",
"218478/images/image_4_compressed.jpg",
"218478/images/image_5_compressed.jpg",
"218478/images/image_6_compressed.jpg",
"218478/images/image_7_compressed.jpg",
"218478/images/image_8... | [
"218478/stls/Bottom.stl",
"218478/stls/Button.stl",
"218478/stls/Lid.stl",
"218478/stls/My_Button_Holder.stl",
"218478/stls/Square.stl",
"218478/stls/Triangle.stl"
] | CC-BY | https://www.printables.com/model/218478 | data_0041.tar |
100466 | Amphenol Helios H4 Connector Tool | <p>This is a tool to disconnect the MC4 connector Amphenol Helios H4.<br>MC4 connector types are typically used in photovoltaic systems.</p><p>In case it is too long, it can be cut shorter.</p><h3><br>Printing</h3><p>Material: I used PETG, but basically all should work<br>Support: not needed</p><p> </p><h3>History... | [
"tool",
"tools",
"mc4",
"disconnector",
"amphenol",
"helios"
] | Hobby & Makers > Tools | [
"100466/images/image_1_compressed.jpg"
] | [
"100466/stls/amphenol-h4-disconnector_v1.0.stl",
"100466/stls/amphenol-h4-disconnector_v1.1.0.stl"
] | CC-BY | https://www.printables.com/model/100466 | data_0041.tar |
409522 | AMS Spool Weight with ventilation holes for Silica Dessicant Filling | <p>Added a bunch of 2mm ventilation holes for the tube to be filled with Silica Dessicant. Kind of adding an extra function to the thing</p><p>printed in PETG (if you want to dry the hole spool centre in a filament dryer, if not PLA is enough.</p><p>0.4mm nozzle</p><p>0.2mm layer height</p> | [
"bambulab",
"ams",
"x1c",
"p1p"
] | 3D Printers > Accessories | [
"409522/images/image_1_compressed.jpg",
"409522/images/image_2_compressed.jpg"
] | [
"409522/stls/Spool Weight Centre Holes Body v2.stl",
"409522/stls/Spool Weight Centre Holes LID v2.stl"
] | CC0 | https://www.printables.com/model/409522 | data_0041.tar |
1258847 | An gridfinity aa and aaa batery holder | <p>An gridfinity aa and aaa batery holder</p> | [
"aa",
"aaa",
"aabattery",
"aabatteryholder",
"aabatterybox",
"aaabattery",
"aaabatteryholder",
"batery",
"aaabatterystorage",
"aabatterystorage",
"aaabatterybox",
"aaabatteries",
"bateryholder"
] | Hobby & Makers > Organizers | [
"1258847/images/image_1_compressed.jpg",
"1258847/images/image_2_compressed.jpg"
] | [
"1258847/stls/gridfinity aa, aaa battery.stl"
] | CC-BY | https://www.printables.com/model/1258847 | data_0041.tar |
1352797 | An ugly detergant spoon with hook (2 versions) | <p>The ugliest spoon for detergant or whatever<br><br>I made 2 versions - 1 normal and 1 with hexagon holes<br><br>Support is included in both models. Dont worry about the cantlever errors</p> | [
"hook",
"powder",
"spoon",
"clothes",
"laundry",
"washing",
"boring",
"detergant"
] | Household > Bathroom | [
"1352797/images/image_1_compressed.jpg"
] | [
"1352797/stls/Detergent spoon with hex-holes, hook and support for it.stl",
"1352797/stls/Detergent spoon with hook and support.stl"
] | CC0 | https://www.printables.com/model/1352797 | data_0041.tar |
67247 | Analog Hearing Aids | <p>These analog hearing aids look great - and they really work! I wear them all the time when watching TV. Also, they are fashionable, especially when you go the extra mile and customize the headband.</p>
<p>They are inspired by corkymork's hearing ear shells (<a href="https://www.thingiverse.com/thing:629455">https://... | [
"thingiverse"
] | Fashion > Other Fashion Accessories | [
"67247/images/image_1_compressed.jpg",
"67247/images/image_2_compressed.jpg",
"67247/images/image_3_compressed.jpg",
"67247/images/image_4_compressed.jpg",
"67247/images/image_5_compressed.jpg",
"67247/images/image_6_compressed.jpg"
] | [
"67247/stls/earcup.stl",
"67247/stls/earshell.stl",
"67247/stls/headband-boring.stl",
"67247/stls/headband-with-catears.stl",
"67247/stls/headband-with-horns.stl"
] | CC-BY | https://www.printables.com/model/67247 | data_0041.tar |
1496086 | Anatomically Accurate Heart with legs and arms | <p>This is an interesting one, it is an Anatomically Accurate Heart, with legs and arms. This is the perfect gift for a cardiologist, or anyone else in the medical field, or just a cool thing for your desk. </p><p> </p><p><strong>HAPPY PRINTING EVERYONE!</strong></p><p> </p><p><strong>Recommended setting... | [
"buddy",
"legs",
"heart",
"accurate",
"anatomically",
"articulatedlegs",
"armsandlegs",
"accurateheart"
] | Learning > Chemistry & Biology | [
"1496086/images/image_1_compressed.jpg",
"1496086/images/image_2_compressed.jpg",
"1496086/images/image_3_compressed.jpg",
"1496086/images/image_4_compressed.jpg",
"1496086/images/image_5_compressed.jpg",
"1496086/images/image_6_compressed.jpg",
"1496086/images/image_7_compressed.jpg"
] | [
"1496086/stls/RealisticHeart.stl"
] | CC-BY | https://www.printables.com/model/1496086 | data_0041.tar |
857432 | Anbernic RG35XX PLUS Grip | <p>This is a remix to fit the Anbernic RG35XX plus. The original RG35XX is 2cm thick and the plus version is 2.2cm thick.</p> | [
"grip",
"anbernic",
"anbernicrg35xx"
] | Gadgets > Portable Devices | [
"857432/images/image_1_compressed.jpg",
"857432/images/image_2_compressed.jpg"
] | [
"857432/stls/RG35xxPLUS gripv10.stl"
] | CC-BY | https://www.printables.com/model/857432 | data_0041.tar |
504070 | Android Logo KeyChain | <p>I put 100% infill for strength </p> | [
"phone",
"keychain",
"android",
"keychains",
"androidlogo"
] | Art & Design > Other Art & Designs | [
"504070/images/image_1_compressed.jpg"
] | [
"504070/stls/Andriod_Keychain.stl"
] | CC0 | https://www.printables.com/model/504070 | data_0041.tar |
141730 | Anet A8 Rod Hole Cover Replacement |
<p>I was missing a rod cover when I assembled my Anet A8 so I made a quick replacement.</p>
<p>You can't really print this the wrong way it's such a small part, I just wouldn't recommend printing it hollow!</p>
<h3>Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>Anet A8</p>
<p class="detail-setting rafts"><s... | [
"aneta8",
"thingiverse",
"aneta8parts"
] | 3D Printers > Other Printer Parts & Upgrades | [
"141730/images/image_1_compressed.jpg",
"141730/images/image_2_compressed.jpg",
"141730/images/image_3_compressed.jpg"
] | [
"141730/stls/rod_cover.stl"
] | CC-BY | https://www.printables.com/model/141730 | data_0041.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.