model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
220016 | Angelo Natale Christmas | [
"christmas",
"christmasdecoration",
"angelo",
"luce",
"neve",
"natale",
"albero"
] | Art & Design > Other Art & Designs | [
"220016/images/image_1_compressed.jpg",
"220016/images/image_2_compressed.jpg",
"220016/images/image_3_compressed.jpg"
] | [
"220016/stls/ANGELO.stl"
] | CC0 | https://www.printables.com/model/220016 | data_0041.tar | |
220419 | Angle Grinder Disc Holder | <p>The threads on Robin Finkers' model on Thingiverse did not print well on my FlashForge. I also wanted to practice my Fusion 360 skills so I generated this from scratch. Fusion 360 threads print great. I used up several left over spools of filament so that's why the model in the photos has multi-colors.</p> | [
"thingiverse"
] | Hobby & Makers > Tools | [
"220419/images/image_1_compressed.jpg",
"220419/images/image_2_compressed.jpg",
"220419/images/image_3_compressed.jpg"
] | [
"220419/stls/Angle Grinder Disc Holder Base 150mm.stl",
"220419/stls/Angle Grinder Disc Holder Lid 150mm.stl",
"220419/stls/Base.stl",
"220419/stls/Lid.stl"
] | CC-BY | https://www.printables.com/model/220419 | data_0041.tar |
507812 | Angle grinder disk holder | Disk holder for angle grinder d125 | Download free 3D printable STL models | [
"organizer",
"grinder",
"holder",
"angle",
"disk"
] | Hobby & Makers > Organizers | [
"507812/images/image_1_compressed.jpg",
"507812/images/image_2_compressed.jpg",
"507812/images/image_3_compressed.jpg"
] | [
"507812/stls/Angle_disk_storage_bot.stl",
"507812/stls/Angle_disk_storage_top.stl"
] | CC0 | https://www.printables.com/model/507812 | data_0041.tar |
63954 | Angle Grinder Drop Cutter | <p>Cut larger rods, bars and bolts more accurately with this tool. It should fit a variety of small angle grinders.</p><p>You will have to position the angle grinder hinged bracket and the job holder to suit your setup. I used a 250 x 250mm scrap board as the base.</p><p><strong>All power tools can cause harm. Do not u... | [
"grinder",
"angle",
"thingiverse"
] | Hobby & Makers > Tools | [
"63954/images/image_1_compressed.jpg",
"63954/images/image_2_compressed.jpg",
"63954/images/image_3_compressed.jpg",
"63954/images/image_4_compressed.jpg",
"63954/images/image_5_compressed.jpg",
"63954/images/image_6_compressed.jpg",
"63954/images/image_7_compressed.jpg",
"63954/images/image_8_compres... | [
"63954/stls/Grinder_base_and_hinge.stl",
"63954/stls/Grinder_Hinge_and_cradle_flat.stl",
"63954/stls/Job_Holder_base.stl",
"63954/stls/Job_holder_clamp.stl",
"63954/stls/Job_holder_retaining_knob.stl"
] | CC-BY | https://www.printables.com/model/63954 | data_0041.tar |
1223511 | Angled Picatinny Foregrip | <p>I present a Glock-ish angled Picatinny foregrip.<br>Angle, form and texture are designed to go well with a Glock pistol grip.<br>The grip can accommodate a spare magazine and has a funnel.<br>A blank STEP-File for your custom textures is included.</p><p>Needed for installation:</p><ul><li>M4x30 countersunk screw</li... | [
"grip",
"glock",
"airsoft",
"picatinny",
"paintball",
"foregrip",
"airsoftaccesories",
"angledforegrip"
] | Sports & Outdoor > Outdoor Sports | [
"1223511/images/image_1_compressed.jpg",
"1223511/images/image_2_compressed.jpg"
] | [
"1223511/stls/Grip.stl",
"1223511/stls/Lock.stl"
] | CC0 | https://www.printables.com/model/1223511 | data_0041.tar |
1240159 | Angry Cat | <p>You can choose between Normal and Blocky one (.STL)</p><p>Fuzzy skin recommended (White one on the photos)</p><p>Use some supports</p><p>Happy printing:)</p> | [
"cat",
"cute",
"miniature",
"ugly",
"angry"
] | Toys & Games > Action Figures & Statues | [
"1240159/images/image_1_compressed.jpg",
"1240159/images/image_10_compressed.jpg",
"1240159/images/image_11_compressed.jpg",
"1240159/images/image_12_compressed.jpg",
"1240159/images/image_13_compressed.jpg",
"1240159/images/image_14_compressed.jpg",
"1240159/images/image_2_compressed.jpg",
"1240159/i... | [
"1240159/stls/blocky.stl",
"1240159/stls/final.stl"
] | CC-BY | https://www.printables.com/model/1240159 | data_0041.tar |
27433 | Angry Eyes Grill for Rancher 3dsets | <p>Modified front panel so that the angry eyes grill fits over it. Both parts easy to print flat on the printer.<br/>
Made holes to replace the two upper 3 x 10 mm screws with 3 x 12 mm screws to secure together the angry eyes mask, front panel and front panel mount. If printed right, the screw change is optional only... | [
"3dsets",
"angry",
"rancher",
"angryeyes"
] | Hobby & Makers > RC & Robotics | [
"27433/images/image_1_compressed.jpg"
] | [
"27433/stls/angry-grill.stl",
"27433/stls/front-panel-angry.stl"
] | CC0 | https://www.printables.com/model/27433 | data_0041.tar |
1144666 | Animal cell model | <p>This is a remix of MosaicManufacturing's animal cell, mixed with the organelles of Marco Pitra's plant cell. I have added ribosomes to the cytoplasm.<br>All parts can be printed with a single extruder, just add a pause in the slicer at the correct layer height and change the filament.</p> | [
"cell",
"biology",
"animalcell"
] | Learning > Chemistry & Biology | [
"1144666/images/image_1_compressed.jpg",
"1144666/images/image_2_compressed.jpg",
"1144666/images/image_3_compressed.jpg"
] | [
"1144666/stls/01_animal_cell_cellmembrane_storage.stl",
"1144666/stls/02_animal_cell_-_cytoplasm_dis.stl",
"1144666/stls/03-mitochondria.stl",
"1144666/stls/04_vesicle.stl",
"1144666/stls/05_lysosome.stl",
"1144666/stls/06-endoplasmtic reticulum.stl",
"1144666/stls/07_nucleus.stl",
"1144666/stls/08_nu... | CC-BY | https://www.printables.com/model/1144666 | data_0041.tar |
530935 | Animal Silhouettes Drawing Stencil Template | <p>Animal Silhouettes Drawing Stencil Template<br>in 100x100x2 mm</p><p>You will find more drawing templates in my collection:<br><a href="https://www.printables.com/de/@AndreasG/collections/749423">https://www.printables.com/de/@AndreasG/collections/749423</a></p> | [
"color",
"party",
"animal",
"children",
"baby",
"animals",
"drawing",
"stencil",
"template",
"colour",
"child",
"faces",
"silhouettes",
"profil",
"templates"
] | Art & Design > 2D Plates & Logos | [
"530935/images/image_1_compressed.jpg"
] | [
"530935/stls/elephant.stl",
"530935/stls/giraffe.stl",
"530935/stls/hippo.stl",
"530935/stls/monkey.stl",
"530935/stls/zebra.stl"
] | CC-BY | https://www.printables.com/model/530935 | data_0041.tar |
898471 | Animals Drawing Templates (fusion360) | <p>The animal drawings come from <a href="https://es.vecteezy.com/miembros/yganko"><strong>yganko</strong> </a>on vecteezy (<a href="https://es.vecteezy.com/arte-vectorial/3193765-vector-conjunto-de-animales-silueta">https://es.vecteezy.com/arte-vectorial/3193765-vector-conjunto-de-animales-silueta</a>).</p><p>The addi... | [
"sheep",
"dog",
"cat",
"animal",
"deer",
"moose",
"rabbit",
"pig",
"crocodile",
"fusion360",
"bear",
"elephant",
"turkey",
"cow",
"lion",
"tiger",
"horse",
"template",
"fox",
"goose",
"donkey",
"duck",
"svg",
"giraffe",
"rhino",
"hippo",
"goat",
"beaver",
"roo... | Hobby & Makers > Tools | [
"898471/images/image_1_compressed.jpg",
"898471/images/image_2_compressed.jpg",
"898471/images/image_3_compressed.jpg",
"898471/images/image_4_compressed.jpg"
] | [
"898471/stls/additional_animals_drawing_template.stl",
"898471/stls/all_original_animals_drawing_template.stl",
"898471/stls/animals_drawing_templates.stl",
"898471/stls/dom_farm_animals_drawing_template.stl",
"898471/stls/exotic_oth_animals_drawing_template.stl"
] | CC-BY | https://www.printables.com/model/898471 | data_0041.tar |
329776 | Anker 4-Port USB Hub Desk Mount | <p>A quick mount/riser for the Anker 4-Port USB slim hub. Wanted something I could attach the hub to my desk with easier access to the ports. I used a bit of blue sticky tack under the hub and mount it to secure it in place as a non-permanent bond. Seems to hold in place well when inserting and removing usb devices.&nb... | [
"usb",
"usbhub",
"anker",
"usbmount"
] | Household > Office | [
"329776/images/image_1_compressed.jpg",
"329776/images/image_2_compressed.jpg",
"329776/images/image_3_compressed.jpg"
] | [
"329776/stls/Anker USB Riser.stl"
] | CC0 | https://www.printables.com/model/329776 | data_0041.tar |
356723 | Ankermake M5 Bowden Tube Thumbscrew cap | <p>If you have problems loading filament it can help to unscrew the tube and guide the filament manually into the extruder (make sure to straighten the last bit of filament)</p><p>This screw makes it easier to do that for every filament change without needing tools.</p> | [
"bowdentube",
"thumbscrew",
"ankermakem5",
"ankermake"
] | 3D Printers > Other Printer Parts & Upgrades | [
"356723/images/image_1_compressed.jpg",
"356723/images/image_2_compressed.jpg"
] | [
"356723/stls/Boden Tube Thumbscrew cap.stl"
] | CC0 | https://www.printables.com/model/356723 | data_0041.tar |
460372 | AnkerMake M5 Safe Zones Remix | <h3>AnkerMake M5 Safe Zones Remix by t_colon via <a href="https://www.thingiverse.com/thing:5949648">https://www.thingiverse.com/thing:5949648</a></h3><p>0.2<br>30%<br>raft-off<br>supprot-off<br>PLA+</p><p>AnkerMake M5</p> | [
"ankermakem5"
] | 3D Printers > Accessories | [
"460372/images/image_1_compressed.jpg",
"460372/images/image_2_compressed.jpg",
"460372/images/image_3_compressed.jpg",
"460372/images/image_4_compressed.jpg"
] | [
"460372/stls/LR.stl"
] | CC-BY | https://www.printables.com/model/460372 | data_0041.tar |
461801 | AnkerMake x Gridfinity - Silicone Covers + Nozzles | <p>To go along with my <a href="https://www.printables.com/model/461751-ankermake-x-gridfinity-shelf">AnkerMake Gridfinity Shelf</a> I created a storage box to fit within a 3x1 Gridfinity bin. Stores 5x spare AnkerMake M5 silicone covers as well as 8 spare Nozzles. <br><br>Uses 12, 6x2mm magnets to better attach t... | [
"nozzles",
"gridfinity",
"ankermakem5",
"ankermake",
"gridfinitybin",
"gridfinitymagnets"
] | 3D Printers > Other Printer Parts & Upgrades | [
"461801/images/image_1_compressed.jpg",
"461801/images/image_2_compressed.jpg"
] | [
"461801/stls/AnkerMake_Spare_SiliconeCovers.stl"
] | CC-BY | https://www.printables.com/model/461801 | data_0041.tar |
26095 | Ankheg Updated | <p>Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a href="https://www.patreon.com/mz4250">https://www.patreon.com/mz4250</a></p>
<p>Patrons have access to all my files in one place, a request board, as well ... | [
"bug"
] | Toys & Games > Board Games | [
"26095/images/image_1_compressed.jpg"
] | [
"26095/stls/ankheg-above-ground-body.stl",
"26095/stls/ankheg-above-ground.stl",
"26095/stls/large-creature-marker.stl"
] | CC-BY | https://www.printables.com/model/26095 | data_0041.tar |
233367 | Annual Ornament - 2021 | <p>Print this in spiral vase mode. The two holes at the bottom allow a ribbon to be tied to the ornament. I recommend metallic filaments for this model. </p><p>I my printer set up to print several at once with “complete individual objects” enables. You'll likely have to set the extruder clearance to allow for mult... | [
"vasemode",
"spiralvase",
"ornament",
"spiralvasemode",
"christmasornament",
"christmasdecorations",
"christmastree",
"christmasornaments",
"christmastreeornament",
"spiralizedvasemode",
"spiralvaseprinting",
"spiralmode"
] | Seasonal designs > Winter & Christmas & New Year's | [
"233367/images/image_1_compressed.jpg"
] | [
"233367/stls/2021 Ornament version2.stl",
"233367/stls/2021 Ornament.stl"
] | CC-BY | https://www.printables.com/model/233367 | data_0041.tar |
9210 | Another Filament Clip. MR V4. | <p>We all need to fix the filament end on spool from unwinding during storage. Here is another simple clip, which works with 1.75 filament on any spool.<br/>
Based on popular design, which I first gladly printed. But somehow with those clips I struggle a bit every time to fit the filament into the slots.<br/>
Finally I... | [
"holder",
"filament",
"clip",
"end",
"unwinding",
"filamentstorage",
"filamentclip",
"filamentend"
] | 3D Printers > Accessories | [
"9210/images/image_1_compressed.jpg",
"9210/images/image_2_compressed.jpg"
] | [
"9210/stls/clip4.stl"
] | CC0 | https://www.printables.com/model/9210 | data_0041.tar |
279225 | Another Pen Holder | [
"penholder"
] | Hobby & Makers > Organizers | [
"279225/images/image_1_compressed.jpg",
"279225/images/image_2_compressed.jpg",
"279225/images/image_3_compressed.jpg",
"279225/images/image_4_compressed.jpg"
] | [
"279225/stls/Another Pen Holder.stl"
] | CC0 | https://www.printables.com/model/279225 | data_0041.tar | |
252350 | Another RMU alternate connection point | <p>Basically just rotated the entry points on the mid-section.</p><p>I'm using this with the top-section from <a href="https://www.printables.com/model/81748-remix-mmu2s-buffer-inspired-by-rmu-buffer">https://www.printables.com/model/81748-remix-mmu2s-buffer-inspired-by-rmu-buffer</a> with ptfe connectors to the top (s... | [
"mk3smmu2s",
"rmu"
] | 3D Printers > Accessories | [
"252350/images/image_1_compressed.jpg",
"252350/images/image_2_compressed.jpg",
"252350/images/image_3_compressed.jpg",
"252350/images/image_4_compressed.jpg",
"252350/images/image_5_compressed.jpg"
] | [
"252350/stls/Front Entry RMU Full Middle.stl"
] | CC0 | https://www.printables.com/model/252350 | data_0041.tar |
47846 | Another Tardis Dice Tower | <p>A dice tower shaped like the Tardis.</p>
<h3>Print instructions</h3><h3>Category: Dice Summary</h3>
<p>A dice tower shaped like the Tardis.</p>
<h3> How I Designed This</h3>
<p>I tightened the stepped spiral of my yin yang tower to fit 3.5 rotations inside the body of the tardis. I think its angled about 30 degrees ... | [
"dicetower",
"dice",
"doctorwho",
"thingiverse",
"tardis",
"tardisdrwho"
] | Toys & Games > Other Toys & Games | [
"47846/images/image_1_compressed.jpg"
] | [
"47846/stls/bettertardisdicetower2.stl"
] | CC-BY | https://www.printables.com/model/47846 | data_0041.tar |
454805 | Anschlag für Druckplatte Elegoo Neptune 3 Pro | <p>Anschlag für die Druckplatte für ein leichtes und richtiges einlegen.<br>Einfach mit Sekundenkleber an die Ecken von unten ankleben.</p><p> </p> | [
"anschlag",
"druckplatte",
"elegooneptune3pro"
] | 3D Printers > Other Printer Parts & Upgrades | [
"454805/images/image_1_compressed.jpg",
"454805/images/image_2_compressed.jpg",
"454805/images/image_3_compressed.jpg",
"454805/images/image_4_compressed.jpg"
] | [
"454805/stls/Anschlag für Druckplatte.stl"
] | CC0 | https://www.printables.com/model/454805 | data_0041.tar |
150541 | Ant test tube retractable feeder(16mm)V2 |
<p>I tried to find a way of feeding ants without having to remove the cotton every time from the test tube. Here's my solution.</p>
<ol>
<li>Push both the feeder and the blocker to maximum in the feeder support</li>
<li>Insert the assembly in the tube with a piece of cotton to avoid escapes</li>
<li>Remove the feede... | [
"feeder",
"ant",
"thingiverse",
"formicarium",
"antnest"
] | Household > Pets | [
"150541/images/image_1_compressed.jpg",
"150541/images/image_2_compressed.jpg",
"150541/images/image_3_compressed.jpg",
"150541/images/image_4_compressed.jpg",
"150541/images/image_5_compressed.jpg",
"150541/images/image_6_compressed.jpg",
"150541/images/image_7_compressed.jpg"
] | [
"150541/stls/blocker.stl",
"150541/stls/Blocker_short_version.stl",
"150541/stls/retractable_feeder.stl",
"150541/stls/retractable_feeder_short_version.stl",
"150541/stls/self_support_feeder_insert.stl",
"150541/stls/self_support_feeder_insert_short_version.stl"
] | CC-BY | https://www.printables.com/model/150541 | data_0041.tar |
237674 | Anti dust cover (USB) | [] | Gadgets > Computers | [
"237674/images/image_1_compressed.jpg"
] | [
"237674/stls/USB_6.stl"
] | CC0 | https://www.printables.com/model/237674 | data_0041.tar | |
954547 | Anti Shake Upper Joint Cap | [] | 3D Printers > Creality Parts & Upgrades | [
"954547/images/image_1_compressed.jpg",
"954547/images/image_2_compressed.jpg"
] | [
"954547/stls/Anti shake upper joint.stl"
] | CC0 | https://www.printables.com/model/954547 | data_0041.tar | |
526634 | Anya from Spy Family | <p>Anya Forger From Spy Family. </p><p>Anya2.3mf and .obj are both updated with thicker dress and (hopefully) no holes. I will leave the old ones up for a bit.</p><p>Please use Anya2 models. </p> | [
"cartoon",
"anime",
"manga",
"spy",
"spyfamily"
] | Art & Design > Sculptures | [
"526634/images/image_1_compressed.jpg",
"526634/images/image_2_compressed.jpg",
"526634/images/image_3_compressed.jpg"
] | [
"526634/stls/anya.stl",
"526634/stls/anya2.stl"
] | CC-BY | https://www.printables.com/model/526634 | data_0041.tar |
1272848 | Anycubic Ace Pro Filament Roller upgrade | <p><strong>Replacement roller that supports the filament in the acepro, with provision for bearings.</strong></p><p>The existing rollers (the lower in the picture) just rotate directly on the plastic marginally increasing the resistance to the filament reel turning. Not wishing to give the Acepro any reason to le... | [
"anycubic",
"kobra",
"acepro"
] | 3D Printers > Anycubic Parts & Upgrades | [
"1272848/images/image_1_compressed.jpg",
"1272848/images/image_2_compressed.jpg",
"1272848/images/image_3_compressed.jpg",
"1272848/images/image_4_compressed.jpg"
] | [
"1272848/stls/AceProRollerBearing.stl"
] | CC-BY | https://www.printables.com/model/1272848 | data_0041.tar |
457114 | Anycubic Kobra - Dual spool holder | <p>I've optimized the last holder model (preventing spools from jumping out of the roller) and upgraded it to dual holder. If you want to use just one side then print the file “body_2” and use original cap with it.</p><p>Uses 4 608Z bearings.</p> | [
"spool",
"holder",
"filament",
"dual",
"kobra"
] | 3D Printers > Anycubic Parts & Upgrades | [
"457114/images/image_1_compressed.jpg"
] | [
"457114/stls/dual_body_1.stl",
"457114/stls/dual_body_2.stl",
"457114/stls/dual_nut_x4.stl",
"457114/stls/dual_roller_x2.stl"
] | CC0 | https://www.printables.com/model/457114 | data_0041.tar |
1163414 | Anycubic Kobra 2 Pro Limit Switch Cover | <p>Cover for the y-axis limit switch to avoid damaging the cable bundle on an Anycubic Kobra 2 Pro</p><p><strong>No hardware required</strong></p><p> </p><p><strong>Mounting steps:</strong></p><p><i>Step 1:</i> Unscrew both screws on the limit switch and remove the two spacers</p><p><i>Step 2: </i>Insert the limit... | [
"cover",
"anycubic",
"endstop",
"limitswitch",
"kobra",
"anycubickobra",
"kobra2",
"kobra2pro",
"anycubickobra2pro"
] | 3D Printers > Anycubic Parts & Upgrades | [
"1163414/images/image_1_compressed.jpg"
] | [
"1163414/stls/Anycubic Kobra 2 Pro Limit Switch Cover.stl"
] | CC-BY | https://www.printables.com/model/1163414 | data_0041.tar |
1147914 | Anycubic Kobra 3 TPU Isolation Feet | <p>My printer sits on a mostly empty entertainment console and vibrates the thing like a drum. I saw this model on ALL3DP's suggested TPU prints list and gave it a go. This does not replace the printer's feet - they just sit securely in the recess.</p><p>It provides decent damping and movement isolation. I don't have a... | [
"feet",
"feetdamper",
"feetriser"
] | 3D Printers > Anycubic Parts & Upgrades | [
"1147914/images/image_1_compressed.jpg",
"1147914/images/image_2_compressed.jpg"
] | [
"1147914/stls/Kobra 3 TPU Feet.stl",
"1147914/stls/Kobra 3 TPU Foot.stl"
] | CC-BY | https://www.printables.com/model/1147914 | data_0041.tar |
348640 | Anycubic Kobra Go Extruder Knob | <p>A knob for the extruder to move filament and to indicate movement.</p><p> </p><p>Make sure to print it slightly bigger to make it fit onto it. The model diameter is exactly 5 mm and the 3d printer has some tolerance</p> | [
"upgrade",
"knob",
"go",
"anycubic",
"kobra"
] | 3D Printers > Anycubic Parts & Upgrades | [
"348640/images/image_1_compressed.jpg",
"348640/images/image_2_compressed.jpg"
] | [
"348640/stls/knobv2.stl"
] | CC-BY | https://www.printables.com/model/348640 | data_0041.tar |
464218 | Anycubic Kobra Go/Neo PTFE Adapter | <p>I got the end off a model I found somewhere but can't remember where. (Sorry)</p><p>Since I wanted to run a PTFE tube from my Sunlu dryer to the printer, I made this adapter. It uses the M10 size threaded adapter. I feed the tube all the way through so the filament won't catch coming out the bottom.</p><... | [
"feeder",
"filament",
"adapter",
"ptfe",
"tube",
"anycubic",
"neo",
"feed",
"kobra"
] | 3D Printers > Anycubic Parts & Upgrades | [
"464218/images/image_1_compressed.jpg"
] | [
"464218/stls/Anycubic PTFE Feed Adapter.stl"
] | CC0 | https://www.printables.com/model/464218 | data_0041.tar |
510271 | Anycubic Kobra Go/Neo X-axis mount for Logitech c270/c310 | <p>No screws needed. Just print and use.<br> </p><p> </p><p>... I think black will be better)</p> | [
"logitech",
"c270",
"anycubic",
"kobra",
"c310"
] | 3D Printers > Accessories | [
"510271/images/image_1_compressed.jpg",
"510271/images/image_2_compressed.jpg"
] | [
"510271/stls/c310.stl",
"510271/stls/c310v2.stl"
] | CC-BY | https://www.printables.com/model/510271 | data_0041.tar |
516092 | Anycubic Kobra Neo/Go LED Light Bar w/ Filament Guide | <p>This is an LED mount for the Anycubic Kobra Neo and Go. It slots into the top bar with a friction fit and includes a filament guide. There is also a version without the filament guide for the Go.</p><p>After printing, you can super glue the two pieces together but it isn't required. You may have to sand the edges to... | [
"led",
"filamentguide",
"ledmount",
"anycubic",
"anycubickobra"
] | 3D Printers > Anycubic Parts & Upgrades | [
"516092/images/image_1_compressed.jpg",
"516092/images/image_2_compressed.jpg",
"516092/images/image_3_compressed.jpg",
"516092/images/image_4_compressed.jpg"
] | [
"516092/stls/left.stl",
"516092/stls/left_noguide.stl",
"516092/stls/right.stl"
] | CC-BY | https://www.printables.com/model/516092 | data_0041.tar |
1290304 | Anycubic Kobra S1 – Large Volume Filament Waste / Purge / Poop Bucket | <p>A custom-designed solution for collecting purged filament from the Anycubic Kobra S1. The mount attaches to the printer using the two existing screws—no modifications or extra hardware required. The bucket then slides into the mount and can be easily removed for emptying.</p><h3>Features:</h3><ul><li><strong>Slide-I... | [
"container",
"poop",
"filament",
"waste",
"bucket",
"anycubic",
"kobra",
"s1"
] | 3D Printers > Anycubic Parts & Upgrades | [
"1290304/images/image_1_compressed.jpg",
"1290304/images/image_2_compressed.jpg",
"1290304/images/image_3_compressed.jpg",
"1290304/images/image_4_compressed.jpg"
] | [
"1290304/stls/Anycubic Kobra S1 Waste Basket Mount.stl",
"1290304/stls/Anycubic Kobra S1 Waste Basket.stl"
] | CC-BY | https://www.printables.com/model/1290304 | data_0041.tar |
280756 | Anycubic Mega X cable holder | [
"mega",
"anycubic",
"cableholder"
] | 3D Printers > Anycubic Parts & Upgrades | [
"280756/images/image_1_compressed.jpg"
] | [
"280756/stls/cable holder v3.stl",
"280756/stls/cable holder v5.stl",
"280756/stls/cable holder v6.stl"
] | CC0 | https://www.printables.com/model/280756 | data_0041.tar | |
272700 | Anycubic Photon M3 Resin Vat Cover | <p>Anycubic Photon m3 vat cover remixed so that the handles are screwed on + added inscription for what printer it is. this is a remix of <a href="https://www.printables.com/cs/model/221980-anycubic-photon-m3-resin-lid-cover%2Fcomments"><strong>Anycubic Photon m3 resin lid cover</strong></a>. </p><p>To attach the ... | [
"cover",
"anycubicphotonm3",
"photonm3",
"resinvatcover"
] | 3D Printers > Accessories | [
"272700/images/image_1_compressed.jpg",
"272700/images/image_2_compressed.jpg",
"272700/images/image_3_compressed.jpg",
"272700/images/image_4_compressed.jpg",
"272700/images/image_5_compressed.jpg"
] | [
"272700/stls/PhotonM3_VatCover-Handle.stl",
"272700/stls/PhotonM3_VatCover.stl"
] | CC-BY | https://www.printables.com/model/272700 | data_0041.tar |
118066 | Anycubic Vyper | <p>hello to all,<br>I have created covers for the motherboard and the power supply. It fits exactly like the original cover.The original metal cover of the power supply needs to be cut to fit the new larger fan so that it has room to blow, for this you can use a saw or tin snips<br>The original metal cover of the power... | [
"fan",
"anycubic",
"modding",
"80mmfan",
"80mm",
"anycubicvyper"
] | 3D Printers > Anycubic Parts & Upgrades | [
"118066/images/image_1_compressed.jpg",
"118066/images/image_2_compressed.jpg",
"118066/images/image_3_compressed.jpg",
"118066/images/image_4_compressed.jpg",
"118066/images/image_5_compressed.jpg",
"118066/images/image_6_compressed.jpg",
"118066/images/image_7_compressed.jpg"
] | [
"118066/stls/Connector PSU Plate 1&2.stl",
"118066/stls/Motherbiard Fan Case.stl",
"118066/stls/Motherboard Plate.stl",
"118066/stls/PSU Plate 1 Cover.stl",
"118066/stls/PSU Plate 1.stl",
"118066/stls/PSU Plate 2.stl"
] | CC0 | https://www.printables.com/model/118066 | data_0041.tar |
931431 | Anycubic Vyper Custom Hotend | <p>I used PLA+ on 200*c</p><p>0.4 layer height</p><p>Tree support</p><p>Make sure to put support blockers on where it mounts to the hotend rail/plate thing and inside the air ducts as they arnt accessable</p><p> </p> | [] | 3D Printers > Anycubic Parts & Upgrades | [
"931431/images/image_1_compressed.jpg",
"931431/images/image_2_compressed.jpg",
"931431/images/image_3_compressed.jpg",
"931431/images/image_4_compressed.jpg"
] | [
"931431/stls/New shroud 2.stl"
] | CC0 | https://www.printables.com/model/931431 | data_0041.tar |
318753 | Anycubic Vyper DirectDrive | <p>Es können der original Extruder und der Schrittmotor weiter verwendet werden. Die 8mm Hülsen müssen ins Druckteil eingepasst werden und zwischen Hülsen und Rolle habe ich eine M5 U-Scheibe eingesetzt.</p> | [
"anycubic",
"directdrive",
"directdriveextruder",
"directextruder",
"vyper"
] | 3D Printers > Anycubic Parts & Upgrades | [
"318753/images/image_1_compressed.jpg",
"318753/images/image_2_compressed.jpg",
"318753/images/image_3_compressed.jpg"
] | [
"318753/stls/vYPER DIRECT.stl"
] | CC0 | https://www.printables.com/model/318753 | data_0041.tar |
406444 | Anycubic Vyper Endstop Cap | <p>Gedruckt wurde mit PET‐G 0,12 mm Druckgeschwindigkeit 50mm/s</p> | [
"cap",
"anycubic",
"endstop",
"vyper"
] | 3D Printers > Anycubic Parts & Upgrades | [
"406444/images/image_1_compressed.jpg",
"406444/images/image_2_compressed.jpg"
] | [
"406444/stls/Anycubic Vyper Endstop Cap.stl"
] | CC0 | https://www.printables.com/model/406444 | data_0041.tar |
498019 | Anycubic Vyper Filament holder 50-80mm spools - easy print! | <h3><strong>*** Please give me a like. It doesn't cost you anything and rewards my time and motivates me to create more models. Thank you! ***</strong></h3><p> </p><p>Die üblichen Filamentrollenhalter passen nur für große 80 mm-Rollen und sind schwer zu drucken. Ich habe alle Teile angepasst, so dass sie weniger D... | [
"spoolholder",
"anycubic",
"thingiverse",
"anycubicvyper",
"vyper"
] | 3D Printers > Accessories | [
"498019/images/image_1_compressed.jpg",
"498019/images/image_2_compressed.jpg",
"498019/images/image_3_compressed.jpg",
"498019/images/image_4_compressed.jpg",
"498019/images/image_5_compressed.jpg",
"498019/images/image_6_compressed.jpg",
"498019/images/image_7_compressed.jpg",
"498019/images/image_8... | [
"498019/stls/Filament-Halter-50-80mm_Anycubic-Vyper-BT.stl",
"498019/stls/Filament-Halter-Rolle-50-80mm_Anycubic-Vyper-BT.stl"
] | CC-BY | https://www.printables.com/model/498019 | data_0041.tar |
305649 | Anycubic wash and cure plate holder | <p>designed to hold a turntable plate for Anycubic wash and cure. </p><p>Can stay in place</p> | [
"anycubic"
] | 3D Printers > Anycubic Parts & Upgrades | [
"305649/images/image_1_compressed.jpg"
] | [
"305649/stls/DRYING PLATE HOLDER V1.stl"
] | CC0 | https://www.printables.com/model/305649 | data_0041.tar |
360347 | Aperature Science Ender 3 QR Code Cover | <p>Remixed to make an Aperture Science Logo</p>
Category: 3D Printer Parts | [
"portal",
"creality",
"thingiverse",
"ender3pro",
"aperature",
"aperaturescience",
"enderqrcover"
] | 3D Printers > Creality Parts & Upgrades | [
"360347/images/image_1_compressed.jpg",
"360347/images/image_2_compressed.jpg"
] | [
"360347/stls/Aperature_Science_Ender_3_Cover.stl"
] | CC-BY | https://www.printables.com/model/360347 | data_0041.tar |
560216 | Aperolino harder spring | <p><i><strong>If you like this model, please throw me a like.</strong></i></p><p>Harder compression spring for the Aperolino to ensure tightness.</p><p>I strongly recommend using PETG.</p><p> </p><p>Update</p><p>(24/08/23)</p><ul><li>Design optimized to increase the compression spring deflection with the same leng... | [
"spring",
"aperol"
] | Gadgets > Other Gadgets | [
"560216/images/image_1_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/560216 | data_0041.tar |
242613 | Aperture Knob Prusa MK3S | <p>I've created a knob with the aperture logo to fit the Prusa MK3S printer.</p><p>There's also an optional handle for 1-finger operating, but i prefer it without the handle.</p> | [] | 3D Printers > Prusa Parts & Upgrades | [
"242613/images/image_1_compressed.jpg",
"242613/images/image_2_compressed.jpg",
"242613/images/image_3_compressed.jpg"
] | [
"242613/stls/Aperture Knob.stl",
"242613/stls/Knob handle.stl"
] | CC0 | https://www.printables.com/model/242613 | data_0041.tar |
1035665 | Apex Legends VK-47 Flatline | <h3>About this model</h3><p>This model was designed in FreeCAD - FOSS (Free and Open-Source Software) 3D parametric modeler. Source file is available.</p><p>It is not 100% accurate in details, but proportions are true to original. Requires <strong>glue</strong> and <strong>metal pipe</strong> (8x1000 mm) to be assemble... | [
"cosplay",
"prop",
"apexlegends",
"cosplayweapon"
] | Costumes & Accessories > Props | [
"1035665/images/image_1_compressed.jpg",
"1035665/images/image_2_compressed.jpg",
"1035665/images/image_3_compressed.jpg",
"1035665/images/image_4_compressed.jpg",
"1035665/images/image_5_compressed.jpg",
"1035665/images/image_6_compressed.jpg",
"1035665/images/image_7_compressed.jpg"
] | [
"1035665/stls/apex_flatline.stl",
"1035665/stls/barrel_a.stl",
"1035665/stls/barrel_b.stl",
"1035665/stls/barrel_detail_a1.stl",
"1035665/stls/barrel_detail_a2.stl",
"1035665/stls/barrel_detail_b1.stl",
"1035665/stls/barrel_end_a.stl",
"1035665/stls/barrel_end_b.stl",
"1035665/stls/barrel_end_c_x2.s... | CC0 | https://www.printables.com/model/1035665 | data_0041.tar |
352457 | Apple Lightning to USB C Cable Protector for Type C End | <p>This is a remix of OG model, which allows to attach tape at the type C end, so the protector doesn't come off when pulling the cable.</p><p>Use papertape or any coloured tape of your choice to colour code your cable ends. </p> | [
"apple",
"iphone",
"tape",
"cableholder",
"remixed",
"usbtypec",
"typec",
"lightningcable"
] | Hobby & Makers > Organizers | [
"352457/images/image_1_compressed.jpg",
"352457/images/image_2_compressed.jpg",
"352457/images/image_3_compressed.jpg",
"352457/images/image_4_compressed.jpg"
] | [
"352457/stls/CableProtectorTypeCEnd_Remixed.stl"
] | CC-BY | https://www.printables.com/model/352457 | data_0041.tar |
964134 | Apple Magic Mouse Stand | [] | Gadgets > Computers | [
"964134/images/image_1_compressed.jpg",
"964134/images/image_2_compressed.jpg",
"964134/images/image_3_compressed.jpg"
] | [
"964134/stls/mouseStand_final.stl"
] | CC-BY | https://www.printables.com/model/964134 | data_0041.tar | |
1135537 | Apple of Eden V2 - Inspired by Assassins Creed | <p>This is a model I made so the apple can run better effects and use a rechargeable battery. Electronics and assembly to follow if interested.</p><p>Electronics parts:</p><ul><li><a href="https://www.adafruit.com/product/3500">Trinket MO</a></li><li><a href="https://www.adafruit.com/product/1904">Micro Lipo Charger (d... | [
"of",
"assassin",
"apple",
"assassinscreed",
"eden"
] | Costumes & Accessories > Cosplay & Costumes in general | [
"1135537/images/image_1_compressed.jpg",
"1135537/images/image_2_compressed.jpg",
"1135537/images/image_3_compressed.jpg",
"1135537/images/image_4_compressed.jpg",
"1135537/images/image_5_compressed.jpg",
"1135537/images/image_6_compressed.jpg",
"1135537/images/image_7_compressed.jpg",
"1135537/images... | [
"1135537/stls/Apple 2 Left.stl",
"1135537/stls/Apple 2 Right.stl",
"1135537/stls/Apple 2 Top Cover.stl",
"1135537/stls/Apple 2 Top.stl",
"1135537/stls/Apple Bottom.stl",
"1135537/stls/Battery Holder.stl",
"1135537/stls/Recharge left.stl",
"1135537/stls/Recharge right.stl",
"1135537/stls/Trinket Moun... | CC-BY | https://www.printables.com/model/1135537 | data_0041.tar |
236270 | Apple Pencil cap | <p>Cap for Apple Pencil. Tight fit to be printed in PLA.</p> | [
"replacement",
"ipad",
"apple",
"applepencil",
"applepencilcap"
] | Hobby & Makers > Electronics | [
"236270/images/image_1_compressed.jpg"
] | [
"236270/stls/Apple pencil cap.stl"
] | CC-BY | https://www.printables.com/model/236270 | data_0041.tar |
130774 | Apple Power Adapter Cable Spool | [
"cable",
"organiser",
"charger",
"apple",
"macbook"
] | Gadgets > Computers | [
"130774/images/image_1_compressed.jpg",
"130774/images/image_2_compressed.jpg"
] | [
"130774/stls/30W_spool.stl"
] | CC0 | https://www.printables.com/model/130774 | data_0041.tar | |
217410 | Apple TV Siri Remote with Apple Airtag Case |
<p>This is a case to attach an Apple Airtag to the 2021 Apple TV Siri Remote. Print with bottom side down with supports in the cutout for the Airtag.</p>
<p>The Airtag should snap into place and be held in by sliding the Siri Remote from the top.</p>
<h3>Print Settings</h3>
<p><strong>Rafts:</strong></p>
<p>Doesn't ... | [
"case",
"thingiverse",
"airtag"
] | Gadgets > Computers | [
"217410/images/image_1_compressed.jpg",
"217410/images/image_2_compressed.jpg",
"217410/images/image_3_compressed.jpg",
"217410/images/image_4_compressed.jpg",
"217410/images/image_5_compressed.jpg"
] | [
"217410/stls/Apple_TV_Siri_Remote_and_Airtag_Case.stl"
] | CC-BY | https://www.printables.com/model/217410 | data_0041.tar |
288052 | Apple TV support | [
"applewatchstand",
"appletvmount",
"appletvholder"
] | Hobby & Makers > Electronics | [
"288052/images/image_1_compressed.jpg"
] | [
"288052/stls/suport APPLE TV 4K.stl",
"288052/stls/suport APPLE TV.stl"
] | CC-BY | https://www.printables.com/model/288052 | data_0041.tar | |
382545 | Apple Watch antique TV charging stand (series 5, 44 mm) | Simple charging stand for Apple Watch series 5, 44 mm | Download free 3D printable STL models | [
"fusion360",
"wirelesscharger",
"charger",
"chargingdock",
"autodeskfusion360",
"applewatch",
"chargingstand",
"44mm"
] | Gadgets > Other Gadgets | [
"382545/images/image_1_compressed.jpg"
] | [
"382545/stls/Charger stand.stl"
] | CC-BY | https://www.printables.com/model/382545 | data_0041.tar |
535258 | Apple Watch charging Dock | Charging Dock for apple watch | Download free 3D printable STL models | [
"phone",
"apple",
"iphone",
"watch",
"useful",
"device",
"applewatch",
"applewatchstand",
"applewatchdock",
"useful3dprints"
] | Gadgets > Portable Devices | [
"535258/images/image_1_compressed.jpg"
] | [
"535258/stls/watch stand.stl"
] | CC0 | https://www.printables.com/model/535258 | data_0041.tar |
296235 | Apple Watch Protector for activity - 40mm | <p>Snap-on cover for 40mm Apple Watch for protection during activity.</p><p>I wanted a part to protect my Apple Watch from scratches and damage during rock climbing, but so I could continue to keep it on my wrist to measure my activity. This design doesn't allow access to the touch screen or button, but allows you to p... | [
"apple",
"watch",
"thingiverse",
"applewatch"
] | Gadgets > Other Gadgets | [
"296235/images/image_1_compressed.jpg",
"296235/images/image_2_compressed.jpg",
"296235/images/image_3_compressed.jpg",
"296235/images/image_4_compressed.jpg",
"296235/images/image_5_compressed.jpg"
] | [
"296235/stls/apple_watch_cover_v16.stl"
] | CC-BY | https://www.printables.com/model/296235 | data_0041.tar |
194618 | Apple Watch series 5 & Airpods dock |
<p>Apple Watch and Airpods dock that will fit the larger USB on the series 5 chargers. Should fit old apple watches too.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>FlashForge</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Finder</p></div>
<p><strong>Rafts:</strong... | [
"dock",
"apple",
"thingiverse",
"applewatch",
"airpods"
] | Household > Office | [
"194618/images/image_1_compressed.jpg",
"194618/images/image_2_compressed.jpg"
] | [
"194618/stls/Apple_Watch__Airpod_Dock.stl"
] | CC-BY | https://www.printables.com/model/194618 | data_0041.tar |
306541 | Apple Watch Stand Honeycomb | [
"honeycomb",
"applewatch",
"applewatchstand",
"applewatchdock",
"applewatchcharging",
"honeycombstoragewall",
"honeycombwall"
] | Hobby & Makers > Organizers | [
"306541/images/image_1_compressed.jpg",
"306541/images/image_2_compressed.jpg",
"306541/images/image_3_compressed.jpg",
"306541/images/image_4_compressed.jpg"
] | [
"306541/stls/Apple Watch Stand Panel Honey.stl"
] | CC0 | https://www.printables.com/model/306541 | data_0041.tar | |
104410 | Apprentice Pillar from Rosslyn Chapel |
<p>Reproduction of the Apprentice Pillar inside Rosslyn Chapel.<br/>
Reduced polygon count so you can import it to Tinkercad.</p>
Category: Scans & Replicas
| [
"templar",
"chapel",
"knights",
"thingiverse",
"pillar",
"apprentice",
"apprenticepillar",
"masonic",
"rosslynchapel",
"templars"
] | World & Scans > People | [
"104410/images/image_1_compressed.jpg",
"104410/images/image_2_compressed.jpg"
] | [
"104410/stls/apprentice_pillar_104410.stl"
] | CC-BY | https://www.printables.com/model/104410 | data_0041.tar |
476746 | Aqara Presence FP2 corner mount | <p>Simple corner mount for Aqara Presence FP2.</p><p> </p><p><strong>Assembly</strong></p><ul><li>Insert metal circular plate from Aqara Presence FP2 box (good enough fit, no glue necessary as it will be hold by magnet anyway)</li><li>Glue double side 3M tape on areas touching the wall or screw with M3 screws (V3)... | [
"wall",
"holder",
"mount",
"wallmount",
"corner",
"aqara",
"fp2",
"presence"
] | Hobby & Makers > Mechanical Parts | [
"476746/images/image_1_compressed.jpg",
"476746/images/image_2_compressed.jpg",
"476746/images/image_3_compressed.jpg",
"476746/images/image_4_compressed.jpg",
"476746/images/image_5_compressed.jpg"
] | [
"476746/stls/Aqara Presence FP2 corner mount V2.stl",
"476746/stls/Aqara Presence FP2 corner mount V3.stl",
"476746/stls/Aqara Presence FP2 corner mount.stl"
] | CC-BY | https://www.printables.com/model/476746 | data_0041.tar |
1182992 | Aqara temperature sensor AAA battery case with metall contacts | [
"xiaomi",
"aqara",
"aaabatteryholder"
] | Hobby & Makers > Other Ideas | [
"1182992/images/image_1_compressed.jpg",
"1182992/images/image_2_compressed.jpg"
] | [] | GPL3.0 | https://www.printables.com/model/1182992 | data_0041.tar | |
868812 | Aquarium Cave | <p>A basic aquarium cave. There are others like it, but this one is mine.</p><p>Designed very quickly in Blender starting with an icosahedron, add some subsurface subdivision, a noise displacement modifier, delete a couple of faces for openings, drag some of the points around a bit, add a 1mm thickness modifier, and do... | [
"decoration",
"aquarium",
"thingiverse",
"cave"
] | Household > Pets | [
"868812/images/image_1_compressed.jpg",
"868812/images/image_2_compressed.jpg",
"868812/images/image_3_compressed.jpg"
] | [
"868812/stls/simple-aquarium-cave.stl"
] | CC-BY | https://www.printables.com/model/868812 | data_0041.tar |
297829 | Aquarium Moss Table |
<p>i wanted it to be able to stand in the aquarium and also wanted an easy way so you can just put the moss on the inside without smushing the moss. This is the result</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div>... | [
"aquarium",
"thingiverse"
] | Household > Pets | [
"297829/images/image_1_compressed.jpg",
"297829/images/image_2_compressed.jpg",
"297829/images/image_3_compressed.jpg",
"297829/images/image_4_compressed.jpg"
] | [
"297829/stls/moss_table.stl"
] | CC-BY | https://www.printables.com/model/297829 | data_0041.tar |
888232 | Aquatic Dragon head | <p>0.2 layer height, 4 walls, 10% grid infill, tree support up to 30 degree on the palte only </p><p> </p><p>From the tips of its razor-sharp teeth to the majestic sweep of its horn, the Sea Dragon Head is a testament to the beauty and power of the mythical realm. This masterpiece inspiring wonder with its br... | [
"dragon",
"fantasy",
"creature",
"sea",
"mythical",
"busts",
"aquatic"
] | Art & Design > Sculptures | [
"888232/images/image_1_compressed.jpg",
"888232/images/image_2_compressed.jpg",
"888232/images/image_3_compressed.jpg",
"888232/images/image_4_compressed.jpg",
"888232/images/image_5_compressed.jpg",
"888232/images/image_6_compressed.jpg"
] | [
"888232/stls/Aquatic Dragon Head.stl"
] | CC-BY | https://www.printables.com/model/888232 | data_0041.tar |
194508 | AR Mag Holder |
<p>AR mag holder. Holds 6 mags with "spring" holding mag catch. Holds GI mags perfect. Works with hexmags and pmags gen 3. Will work with the gen 2 pmags but the base plate is wide. Holes on bottom if you would like to bolt to the wall and table. Stackable if you just want to put them somewhere when you are out pew ... | [
"organizer",
"holder",
"gun",
"ar15",
"thingiverse",
"pewpew",
"magazine",
"pew",
"range",
"pmag",
"boomstick",
"hexmag",
"armalite",
"blackriflesmatter",
"gimag",
"pewpewpew"
] | Sports & Outdoor > Other Sports | [
"194508/images/image_1_compressed.jpg",
"194508/images/image_2_compressed.jpg",
"194508/images/image_3_compressed.jpg",
"194508/images/image_4_compressed.jpg"
] | [
"194508/stls/MAGholder_v11.stl"
] | CC-BY | https://www.printables.com/model/194508 | data_0041.tar |
845532 | AR Pack Block REV.3 | <p>IMPORTANT NOTE: This file may be mirrored for individuals who utilize a buffer tube that folds to the left, such as the product sold by Law tactical and and other similar products.</p><p>REV.3 of my pack block for AR pattern uppers and lowers that allows you to transport them as a clean, compact, and retained packag... | [
"ar15",
"airsoft",
"survival",
"backpacking",
"airsoftaccesories",
"hunting",
"firearms",
"armalite"
] | Sports & Outdoor > Outdoor Sports | [
"845532/images/image_1_compressed.jpg",
"845532/images/image_2_compressed.jpg",
"845532/images/image_3_compressed.jpg",
"845532/images/image_4_compressed.jpg",
"845532/images/image_5_compressed.jpg",
"845532/images/image_6_compressed.jpg",
"845532/images/image_7_compressed.jpg"
] | [
"845532/stls/AR pack block REV.3 no maker mark.stl",
"845532/stls/AR pack block REV.3.stl"
] | CC-BY | https://www.printables.com/model/845532 | data_0041.tar |
298630 | Arañas / Spider | <p>Modelos planos de arañas</p><p> </p> | [
"spider",
"silhouette"
] | Art & Design > Other Art & Designs | [
"298630/images/image_1_compressed.jpg"
] | [
"298630/stls/Arañas (1).stl",
"298630/stls/Arañas (2).stl",
"298630/stls/Arañas (3).stl",
"298630/stls/Arañas (4).stl",
"298630/stls/Arañas (5).stl",
"298630/stls/Arañas (6).stl",
"298630/stls/Arañas.stl"
] | CC-BY | https://www.printables.com/model/298630 | data_0041.tar |
24203 | Arc-Gimbal | <p>A big and a small arc-gimbal, you find the sources here: <a href="https://www.youmagine.com/designs/arc-gimbal">https://www.youmagine.com/designs/arc-gimbal</a></p>
<p>It prints great, so i like to republish it here.</p>
| [
"gimbal",
"arc"
] | Toys & Games > Other Toys & Games | [] | [
"24203/stls/arc_gimbal_5.stl",
"24203/stls/arc_gimbal_9_150_spiral.stl"
] | CC-BY | https://www.printables.com/model/24203 | data_0041.tar |
44061 | Arcade Joystick Controler | <p>These are based on upperpeninsulaplastics's <a href="https://www.thingiverse.com/thing:2771521">Ultimate Retropie Joystick Controller</a>. Thanks for providing a .step file!</p>
<p>These are the changes to my design:</p>
<ul>
<li>Tabbed holes that work for snap-in buttons</li>
<li>All other buttons to front</li>
<li... | [
"game",
"videogame",
"retro",
"retrogaming",
"arcadecabinet",
"joystick",
"arcade",
"controller",
"emulation",
"mame",
"thingiverse",
"retropie"
] | Hobby & Makers > Electronics | [
"44061/images/image_1_compressed.jpg",
"44061/images/image_10_compressed.jpg",
"44061/images/image_11_compressed.jpg",
"44061/images/image_12_compressed.jpg",
"44061/images/image_2_compressed.jpg",
"44061/images/image_3_compressed.jpg",
"44061/images/image_4_compressed.jpg",
"44061/images/image_5_comp... | [
"44061/stls/joystick_box_bottom.stl",
"44061/stls/joystick_box_top_cut_invaders.stl",
"44061/stls/joystick_box_top_cut_pacman.stl",
"44061/stls/joystick_box_top_decal_invaders.stl",
"44061/stls/joystick_box_top_decal_pacman.stl",
"44061/stls/joystick_box_top_solid.stl"
] | CC-BY | https://www.printables.com/model/44061 | data_0041.tar |
880520 | arch linux super key | <p>update log:</p><ul><li>logo rotation corrected</li></ul> | [
"keycap",
"keyboard",
"keycaps",
"linux",
"archlinux"
] | Gadgets > Computers | [
"880520/images/image_1_compressed.jpg"
] | [
"880520/stls/super_key.stl"
] | GPL3.0 | https://www.printables.com/model/880520 | data_0041.tar |
106839 | Archery - arrowhead & arrow extender | <h3>Info</h3><p>Both designed for 8mm arrows.<br/>I print arrowhead with 100% infill PLA and it works fine. For more durability, you can use etc. PETG, ABS.</p><h3>Recommended usage:</h3><ul><li>Use the extender as close to the tip as possible for maximum efficiency (picture 3, method 3). If you use method 2 from pic. ... | [
"extender",
"archery",
"thingiverse",
"arrow",
"arrowhead"
] | Sports & Outdoor > Other Sports | [
"106839/images/image_1_compressed.jpg",
"106839/images/image_2_compressed.jpg",
"106839/images/image_3_compressed.jpg",
"106839/images/image_4_compressed.jpg"
] | [
"106839/stls/arrowHead_106839.stl",
"106839/stls/arrow_extender_106839.stl"
] | CC-BY | https://www.printables.com/model/106839 | data_0041.tar |
474102 | Archery Arm Guard | <p>This is my archery arm guard, designed in Fusion 360.</p>
<p>designed because not everyone has a heatgun to bend plastic, so after you have printed this just bend it by hand into shape.</p>
<p>printed at 0.15 in PLA</p>
Category: Sport & Outdoors | [
"thingiverse"
] | Sports & Outdoor > Outdoor Sports | [
"474102/images/image_1_compressed.jpg",
"474102/images/image_2_compressed.jpg",
"474102/images/image_3_compressed.jpg",
"474102/images/image_4_compressed.jpg"
] | [
"474102/stls/arm_guard_mk3.stl"
] | CC-BY | https://www.printables.com/model/474102 | data_0041.tar |
359476 | Archery: String clip, finger tab and arm guard |
<p>This post contains 3 models related with the practice of archery:</p>
<p>The first model is a simple clip, used to keep the turns on your string when putting it in a storage.</p>
<p>The second one is a replacement for the finger wedge in finger tabs.</p>
<p>Both models print without support.</p>
<p>The third mode... | [
"guard",
"archery",
"thingiverse"
] | Sports & Outdoor > Outdoor Sports | [
"359476/images/image_1_compressed.jpg",
"359476/images/image_10_compressed.jpg",
"359476/images/image_11_compressed.jpg",
"359476/images/image_12_compressed.jpg",
"359476/images/image_13_compressed.jpg",
"359476/images/image_2_compressed.jpg",
"359476/images/image_3_compressed.jpg",
"359476/images/ima... | [
"359476/stls/Arm_guard.stl",
"359476/stls/Finger_tab.stl",
"359476/stls/String_holder.stl"
] | CC-BY | https://www.printables.com/model/359476 | data_0041.tar |
133696 | Archimedean Solids | <p>The Archimedean solids are the 13 polyhedra that are convex, have identical vertices, and their faces are regular. They don't include the Platonic solids, which have identical faces.</p><p>All 13 can be listed in Mathematica with the expression </p><p>In[1]:=PolyhedronData["Archimedean"]</p><p>Out[1... | [
"geometry",
"mathematics",
"maths"
] | Learning > Math | [
"133696/images/image_1_compressed.jpg",
"133696/images/image_2_compressed.jpg"
] | [
"133696/stls/Archemedean.stl",
"133696/stls/Cuboctahedron.stl",
"133696/stls/GreatRhombicosidodecahedron.stl",
"133696/stls/GreatRhombicuboctahedron.stl",
"133696/stls/Icosidodecahedron.stl",
"133696/stls/SmallRhombicosidodecahedron.stl",
"133696/stls/SmallRhombicuboctahedron.stl",
"133696/stls/SnubCu... | CC-BY | https://www.printables.com/model/133696 | data_0041.tar |
28542 | Archimedes' screw | <p>The water screw, popularly known as the Archimedes' screw and also known as the screw pump, Archimedean screw, or Egyptian screw,[1] is a machine used for transferring water from a low-lying body of water into irrigation ditches. Water is pumped by turning a screw-shaped surface inside a pipe. Archimedes screws are ... | [
"gears",
"screw",
"archimed"
] | Learning > Engineering | [
"28542/images/image_1_compressed.jpg",
"28542/images/image_2_compressed.jpg",
"28542/images/image_3_compressed.jpg",
"28542/images/image_4_compressed.jpg"
] | [
"28542/stls/cap.stl",
"28542/stls/gear_big.stl",
"28542/stls/gear_small.stl",
"28542/stls/handle.stl",
"28542/stls/lug.stl",
"28542/stls/screw.stl",
"28542/stls/sleeve.stl",
"28542/stls/tube.stl"
] | CC0 | https://www.printables.com/model/28542 | data_0041.tar |
963220 | architectural model yacht and boat | <p>architectural model yacht and boat</p> | [
"boat",
"architectural",
"yacht"
] | Art & Design > Sculptures | [
"963220/images/image_1_compressed.jpg",
"963220/images/image_2_compressed.jpg"
] | [
"963220/stls/yat_1.stl",
"963220/stls/yat_2.stl",
"963220/stls/yat_3.stl"
] | CC0 | https://www.printables.com/model/963220 | data_0041.tar |
114300 | Arctic Tinyrider RC snowmobile | <p>It's my remix scaled down of the snowmobile of 3Drcnc.</p><p>Lot of work and test on this open source project to make it easy to print, easy to build, powerful, reliable and easy to buy parts to make it (same screws and bearings for all the build)</p><h3><i><strong>Description under Video:</strong></i></h3><p> ... | [
"rc",
"car",
"snow",
"track",
"ski",
"openrc",
"idler",
"sprocket",
"skidoo",
"brushless",
"2212",
"outrunner",
"motoneige",
"radiocommande"
] | Hobby & Makers > RC & Robotics | [
"114300/images/image_1_compressed.jpg",
"114300/images/image_2_compressed.jpg",
"114300/images/image_3_compressed.jpg",
"114300/images/image_4_compressed.jpg",
"114300/images/image_5_compressed.jpg",
"114300/images/image_6_compressed.jpg",
"114300/images/image_7_compressed.jpg"
] | [
"114300/stls/5mm 10 teeth pinion.stl",
"114300/stls/5mm 11 teeth pinion.stl",
"114300/stls/5mm 12 teeth pinion.stl",
"114300/stls/5mm 8 teeth pinion.stl",
"114300/stls/5mm 9 teeth pinion.stl",
"114300/stls/Arctic Tinyrider full assembly.stl",
"114300/stls/arm mount leg x2.stl",
"114300/stls/arm mount ... | CC-BY | https://www.printables.com/model/114300 | data_0041.tar |
220915 | Arctis Wireless Pro wall mounted Headphone Stand | <p>Simple holder that mounts on the wall for the Arctis Wireless Pro headset (should work fine with the wired version).<br><br>Can print decently without support, and be mounted with regular screws into the wall as there won't be a lot of weight on it.</p> | [
"office",
"fusion360",
"headphones",
"headphonestand",
"officeorganization"
] | Household > Office | [
"220915/images/image_1_compressed.jpg",
"220915/images/image_2_compressed.jpg"
] | [
"220915/stls/arctis_wireless_pro_wall_mount_stand.stl"
] | CC0 | https://www.printables.com/model/220915 | data_0041.tar |
244258 | Arduino LCD Keypad Shield Snap-Fit case | <p>I made a case for LCD Keypad shield for arduino uno. </p><p>The case holds on to the shield itself, so the shield can be detached from arduino togather with case.</p><p>The buttons are integrated in the case itself (similar to reset button on prusa printers), so no small parts that fall out during assembly.</p>... | [
"case",
"shield",
"arduino",
"snap",
"snapfit",
"lcd",
"keypad",
"keypadshield"
] | Hobby & Makers > Electronics | [
"244258/images/image_1_compressed.jpg",
"244258/images/image_2_compressed.jpg",
"244258/images/image_3_compressed.jpg"
] | [
"244258/stls/LCD_Keypad_Shield_Case_BigHalf_v2.stl",
"244258/stls/LCD_Keypad_Shield_Case_Cover_v2.stl"
] | CC-BY | https://www.printables.com/model/244258 | data_0041.tar |
962844 | Arduino Leonardo case | [
"case",
"easytoprint",
"arduino",
"easy",
"cover",
"electronics",
"screwless",
"single",
"electronic",
"arduinocase",
"singleextruder",
"cases",
"nosupport",
"electronicsenclosure",
"easyprint",
"arduinomount",
"leonardo",
"electronicsbox",
"covers",
"electronicscase",
"nosup... | Hobby & Makers > Electronics | [
"962844/images/image_1_compressed.jpg",
"962844/images/image_2_compressed.jpg",
"962844/images/image_3_compressed.jpg",
"962844/images/image_4_compressed.jpg"
] | [
"962844/stls/Arduino_Leonardo_Case_2_VF.stl"
] | CC-BY | https://www.printables.com/model/962844 | data_0041.tar | |
536532 | Arduino Uno R3 Holder | <p>Arduino Uno R3 holder. This will allow you to attach your arduino onto the holderthat can be screwed on to anything e.g. wood board. You will need:</p><ul><li>M3 screw (10mm or more) x4</li><li>M3 nut x4</li></ul><p> </p> | [
"holder",
"mount",
"arduino",
"bracket",
"uno",
"m3",
"bumper",
"bumpercase",
"r3"
] | Hobby & Makers > Electronics | [
"536532/images/image_1_compressed.jpg",
"536532/images/image_2_compressed.jpg",
"536532/images/image_3_compressed.jpg",
"536532/images/image_4_compressed.jpg",
"536532/images/image_5_compressed.jpg"
] | [
"536532/stls/Arduino Uno Mount.stl"
] | CC-BY | https://www.printables.com/model/536532 | data_0041.tar |
524213 | Arduino UNO / Nano / ESP32 Breadboard Base | <p>This is a series of bases for Arduino UNO and similar expansion boards. I wanted a solid base to keep my boards along with a typical 830-pin breadboard for my projects.</p><p>I was initially inspired by <a href="https://www.thingiverse.com/dimwit-dave/designs">Dimiwit-Dave's designs</a> but since those designs use n... | [
"arduino",
"esp8266",
"esp32",
"breadboard"
] | Hobby & Makers > Electronics | [
"524213/images/image_1_compressed.jpg",
"524213/images/image_2_compressed.jpg",
"524213/images/image_3_compressed.jpg",
"524213/images/image_4_compressed.jpg"
] | [
"524213/stls/A - Uno & ESP32 Breadboard.stl",
"524213/stls/B - ESP32 & Micro Breadboard.stl"
] | CC-BY | https://www.printables.com/model/524213 | data_0041.tar |
524235 | Arduino UNO / Nano / ESP32 Breadboard Box | <p>I made a remixed version of this magnificent rugged box to store my <a href="https://www.printables.com/model/524213-arduino-uno-nano-esp32-breadboard-base">Arduino UNO / Nano / ESP32 & Breadboard bases</a>. </p> | [] | Hobby & Makers > Electronics | [
"524235/images/image_1_compressed.jpg",
"524235/images/image_2_compressed.jpg"
] | [
"524235/stls/Rugged Box Parametric V2 Arduino Box.stl",
"524235/stls/Rugged Box Parametric V2 Latches.stl",
"524235/stls/Rugged Box Parametric V2 Lid.stl"
] | CC-BY | https://www.printables.com/model/524235 | data_0041.tar |
108079 | ARK Survival led LOGO | <p>Logo iluminado con LED del videojuego ARK.</p><p>Disponible base completa o por parte dependiendo del tamaño de tu impresora.</p><p>Para las tapas de la “A” recomiendo imprimir en color blanco y posteriormente hacer un cambio de filamento a gris, así conseguimos que la luz pase a través de las “grietas” del diseño.<... | [
"logo",
"led",
"survival",
"ark"
] | Art & Design > 2D Plates & Logos | [
"108079/images/image_1_compressed.jpg",
"108079/images/image_2_compressed.jpg"
] | [
"108079/stls/Base.stl",
"108079/stls/BasePart1.stl",
"108079/stls/BasePart2Conector.stl",
"108079/stls/FondoDreta.stl",
"108079/stls/FondoEsquerra.stl",
"108079/stls/PuntaDalt.stl",
"108079/stls/PuntaDreta.stl",
"108079/stls/PuntaEsquerra.stl",
"108079/stls/TapaDreta.stl",
"108079/stls/TapaEsquerr... | CC0 | https://www.printables.com/model/108079 | data_0041.tar |
271245 | Arkham Horror LCG Player Board | <p>Arkham Horror LCG Player Board. Fits sleeved player cards. Track your health, sanity and actions remaining during investigator phase. Comes with small tray to store collected clues and resources. Designed in tinkercad and printed on i3MKs+ using default 0.20 mm quality setting in prusa slicer. No supports needed.&nb... | [
"horror",
"boardgame",
"arkham",
"arkhamhorror",
"arkhamhorrorlcg",
"playerboard"
] | Toys & Games > Board Games | [
"271245/images/image_1_compressed.jpg",
"271245/images/image_2_compressed.jpg"
] | [
"271245/stls/AH Bit Trackers.stl",
"271245/stls/AH Player Board 1.1.stl"
] | CC-BY | https://www.printables.com/model/271245 | data_0041.tar |
581077 | Armrest Lock: Herman Miller Aeron | <p>This model locks the arm rests to one position of your choosing by replacing the indexing component inside the arm rest with a fixed piece.</p><p>There are 11 plate options labeled -5 to +5. The more negative a number, the further outwards the arms will point. The more positive a number the more inwards the arms wil... | [
"armrest",
"aeron",
"hermanmiller"
] | Household > Office | [
"581077/images/image_1_compressed.jpg",
"581077/images/image_2_compressed.jpg",
"581077/images/image_3_compressed.jpg",
"581077/images/image_4_compressed.jpg"
] | [
"581077/stls/-1 Simple.stl",
"581077/stls/-1L Stiff.stl",
"581077/stls/-1R Stiff.stl",
"581077/stls/-2 Simple.stl",
"581077/stls/-2L Stiff.stl",
"581077/stls/-2R Stiff.stl",
"581077/stls/-3 Simple.stl",
"581077/stls/-3L Stiff.stl",
"581077/stls/-3R Stiff.stl",
"581077/stls/-4 Simple.stl",
"58107... | GPL3.0 | https://www.printables.com/model/581077 | data_0041.tar |
971285 | Arrow Tube Arrow Clips | <p>Use 2 clips (top and bottom) to hold up to a dozen arrows. You can also use a 3/8" dowl down the middle if desired.</p> | [
"storage",
"bow",
"archery",
"arrows"
] | Sports & Outdoor > Outdoor Sports | [
"971285/images/image_1_compressed.jpg",
"971285/images/image_2_compressed.jpg",
"971285/images/image_3_compressed.jpg",
"971285/images/image_4_compressed.jpg"
] | [
"971285/stls/12 Arrow 4IN ID Tube.stl"
] | CC-BY | https://www.printables.com/model/971285 | data_0041.tar |
1439209 | Articulated realistic Rat toy | <p>my daughter wanted a rat to resemble her pet rat Bobinski so here she is. she does print support free</p> | [
"rat",
"articulated",
"realistic"
] | Toys & Games > Other Toys & Games | [
"1439209/images/image_1_compressed.jpg",
"1439209/images/image_2_compressed.jpg"
] | [
"1439209/stls/Rat color fin.stl"
] | CC0 | https://www.printables.com/model/1439209 | data_0041.tar |
1282793 | Articulated Bacteriophage Desk Toy/Keychain | <p>A simple, articulated, and print-in-place T4 bacteriophage modeled after the real-life attachment process of a bacteriophage, with legs that bend to allow the phage baseplate to reach the cell surface. A great desk toy or learning tool for students and scientists alike! </p><p>Designed for final art project, In... | [
"education",
"stem",
"articulated",
"printinplace",
"science",
"keychain",
"moveable",
"movement",
"desktoy",
"biology",
"bacteriophage"
] | Learning > Chemistry & Biology | [
"1282793/images/image_1_compressed.jpg",
"1282793/images/image_2_compressed.jpg",
"1282793/images/image_3_compressed.jpg",
"1282793/images/image_4_compressed.jpg",
"1282793/images/image_5_compressed.jpg",
"1282793/images/image_6_compressed.jpg"
] | [
"1282793/stls/bacteriophage.stl"
] | CC-BY | https://www.printables.com/model/1282793 | data_0041.tar |
1471564 | Articulated Badware from Die of Death Roblox Figure (KDC Ver) | <p>Print in PETG so Badware doesnt “ware” down. He doesnt follow my R6AA figure rig, and instead has his own. His arms connect to the double-ball joint, and his legs do connect in my classic R6AA knee systems. Also has 3D ribs in chest!!</p><p>(In photos, size comparison to the Classic Blocky Figure)</p><p>11/6/25 UPD:... | [
"forsaken",
"articulated",
"roblox",
"robloxfigure",
"dieofdeath"
] | Toys & Games > Action Figures & Statues | [
"1471564/images/image_1_compressed.jpg",
"1471564/images/image_2_compressed.jpg",
"1471564/images/image_3_compressed.jpg",
"1471564/images/image_4_compressed.jpg",
"1471564/images/image_5_compressed.jpg",
"1471564/images/image_6_compressed.jpg"
] | [
"1471564/stls/Badware.stl"
] | CC-BY | https://www.printables.com/model/1471564 | data_0041.tar |
1063619 | Articulated bat | [
"toy",
"bat",
"games",
"toys",
"articulated"
] | Toys & Games > Other Toys & Games | [
"1063619/images/image_1_compressed.jpg",
"1063619/images/image_2_compressed.jpg",
"1063619/images/image_3_compressed.jpg"
] | [
"1063619/stls/bat articulated a1 mini 3mf.stl",
"1063619/stls/bat articulated a1 mini stl.stl",
"1063619/stls/bat articulated p1 3mf.stl",
"1063619/stls/bat articulated stl p1.stl"
] | CC-BY | https://www.printables.com/model/1063619 | data_0041.tar | |
1539572 | Articulated Cyber Gecko Duo - Print-in-Place Flexi Lizard | <p>Two versions in one pack: sharp low-poly cyber style (gray) and smooth classic flexi (white). Fully articulated, no supports needed, prints in place. Perfect fidget toy, desk buddy or collection piece. Scales and joints optimized for durability and smooth movement. Printed in PLA, layer height 0.2mm. Enjoy!</p> | [
"toy",
"lizard",
"articulated",
"nosupport",
"gecko"
] | Toys & Games > Other Toys & Games | [
"1539572/images/image_1_compressed.jpg",
"1539572/images/image_2_compressed.jpg",
"1539572/images/image_3_compressed.jpg",
"1539572/images/image_4_compressed.jpg",
"1539572/images/image_5_compressed.jpg",
"1539572/images/image_6_compressed.jpg"
] | [
"1539572/stls/low-geeko.stl",
"1539572/stls/low-geeko2.stl"
] | CC-BY | https://www.printables.com/model/1539572 | data_0041.tar |
1575383 | Articulated Dino with Heart | <p>This adorable <strong>articulated dinosaur holding a heart</strong> is a fun, cute, and expressive print that looks great on any desk, shelf, or gift display. The segmented body allows for flexible posing straight off the print bed with <strong>no supports required</strong>.</p><p>Perfect for <strong>Valentine’s Day... | [
"toy",
"3d",
"desk",
"print",
"cartoon",
"no",
"decor",
"cute",
"dinosaur",
"dino",
"fidget",
"gift",
"articulated",
"flexible",
"flexi",
"easy",
"love",
"heart",
"in",
"supports",
"valentine",
"kawaii",
"place"
] | Toys & Games > Other Toys & Games | [
"1575383/images/image_1_compressed.jpg",
"1575383/images/image_2_compressed.jpg"
] | [
"1575383/stls/HeartFlexiDino.stl"
] | CC0 | https://www.printables.com/model/1575383 | data_0041.tar |
309098 | articulated enderman | <p>This is an articulated ender man and all the joints work perfectly. If you want purple eyes then make sure to pause at the eyes and then switch the filament. If you like this please check out my <a href="https://www.printables.com/model/336557-articulated-enderman-ornament">https://www.printables.com/model/336557-ar... | [
"minecraft",
"articulated",
"thingiverse",
"minecraftfigures",
"enderman",
"ragdoll"
] | Toys & Games > Other Toys & Games | [
"309098/images/image_1_compressed.jpg",
"309098/images/image_2_compressed.jpg",
"309098/images/image_3_compressed.jpg",
"309098/images/image_4_compressed.jpg"
] | [
"309098/stls/articulated_enderman_V2.stl"
] | CC-BY | https://www.printables.com/model/309098 | data_0041.tar |
1454858 | Articulated Gourdy From Dandy's World (Roblox Figure) | <p>Gourdy from Roblox Dandy's World Halloween Event! </p><p>NOTE: CHARACTER IS NOT MINE, GOURDY, AND ALL DANDY'S WORLD CHARACTERS BELONG TO QWEL AND BLUSHCRUNCH STUDIO. THE FIGURE WILL BE TAKEN DOWN UPON REQUEST. &nbs... | [
"figure",
"articulated",
"roblox",
"dandysworld",
"robloxfigure"
] | Toys & Games > Action Figures & Statues | [
"1454858/images/image_1_compressed.jpg",
"1454858/images/image_2_compressed.jpg",
"1454858/images/image_3_compressed.jpg",
"1454858/images/image_4_compressed.jpg",
"1454858/images/image_5_compressed.jpg",
"1454858/images/image_6_compressed.jpg",
"1454858/images/image_7_compressed.jpg"
] | [
"1454858/stls/Gourdy.stl",
"1454858/stls/PROTOTYPE.stl"
] | CC-BY | https://www.printables.com/model/1454858 | data_0041.tar |
1437159 | Articulated Harken Roblox Figure (Die of Death) | <p>Pay attention to where the legs and arms are place. They are different. The joint's depth in the arm and the leg is different. build it carefully. Print in PETG with tree supports for best results.</p><p>OVERHAUL UPDATE 11/13/25: Added Harken's spear, and arms to grab spear. Made the parts make a little more sense.<... | [
"articulated",
"roblox",
"robloxfigure",
"dieofdeath"
] | Toys & Games > Action Figures & Statues | [
"1437159/images/image_1_compressed.jpg",
"1437159/images/image_2_compressed.jpg",
"1437159/images/image_3_compressed.jpg",
"1437159/images/image_4_compressed.jpg",
"1437159/images/image_5_compressed.jpg"
] | [
"1437159/stls/Harken (Overhaul Update).stl",
"1437159/stls/Harken's Spear and Compatible Arms.stl"
] | CC-BY | https://www.printables.com/model/1437159 | data_0041.tar |
1594784 | Articulated John Doe from Forsaken (Roblox Figure) | <p>Print in PETG with tree supports for results better that what this universe's john doe ended up as. </p><p>ALERT: NEW ARTICULATION CLASS. This figure is using a new version of shoulder joints designed for improvised articulation, which makes up for having less freedom of movement. I ALWAYS want to preserve deta... | [
"forsaken",
"articulated",
"roblox",
"johndoe",
"robloxfigure",
"robloxforsaken"
] | Toys & Games > Action Figures & Statues | [
"1594784/images/image_1_compressed.jpg",
"1594784/images/image_2_compressed.jpg",
"1594784/images/image_3_compressed.jpg",
"1594784/images/image_4_compressed.jpg",
"1594784/images/image_5_compressed.jpg",
"1594784/images/image_6_compressed.jpg",
"1594784/images/image_7_compressed.jpg",
"1594784/images... | [
"1594784/stls/Forsaken's John Doe.stl"
] | CC-BY | https://www.printables.com/model/1594784 | data_0041.tar |
527309 | Articulated LED Honeycomb Mount | <p>It's kinda simple for my first upload, but it gave me some joy to join two great designs.</p><p> </p><h4>Printing settings</h4><ul><li>layer height: 0.2mm</li><li>perimeter: 4</li><li>infill: 20% cubic</li></ul> | [
"lamp",
"gu10",
"hsw",
"hswinsert"
] | Household > Other House Equipment | [
"527309/images/image_1_compressed.jpg",
"527309/images/image_2_compressed.jpg"
] | [
"527309/stls/hsw_mount.stl"
] | CC-BY | https://www.printables.com/model/527309 | data_0041.tar |
1036948 | Articulated Mothman Cryptid | <p>If you like cryptids, then check out my other monster model, the Flatwoods Monster <a href="https://www.printables.com/model/1013664-flatwoods-monster-figure-cryptid">https://www.printables.com/model/1013664-flatwoods-monster-figure-cryptid</a></p><p><br>This model prints in a few parts. No glue or extra hardware ne... | [
"halloween",
"scary",
"figure",
"sculpture",
"creature",
"articulated",
"flexi",
"doll",
"spooky",
"cryptid",
"mothman"
] | Art & Design > Sculptures | [
"1036948/images/image_1_compressed.jpg",
"1036948/images/image_10_compressed.jpg",
"1036948/images/image_11_compressed.jpg",
"1036948/images/image_12_compressed.jpg",
"1036948/images/image_2_compressed.jpg",
"1036948/images/image_3_compressed.jpg",
"1036948/images/image_4_compressed.jpg",
"1036948/ima... | [
"1036948/stls/moth-body-w-eyes.stl",
"1036948/stls/Moth-Wing-Big Top.stl",
"1036948/stls/Moth-Wing-Small Lower.stl",
"1036948/stls/mothman-eyes.stl",
"1036948/stls/mothman-n0_eyes.stl"
] | CC-BY | https://www.printables.com/model/1036948 | data_0041.tar |
426932 | Articulated Mount Logitech C270 Adapter | <p>You will need:</p><ul><li>M3 x 25mm screw</li><li>M3 square nut</li></ul><p>Happy Printing!</p> | [
"cameramount"
] | 3D Printers > Accessories | [
"426932/images/image_1_compressed.jpg",
"426932/images/image_2_compressed.jpg"
] | [
"426932/stls/articulated_mount_logitech_C270.stl"
] | CC-BY | https://www.printables.com/model/426932 | data_0041.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.