model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
468086 | Case Body with Ventilation Slots | As suggested by @vaxxi I＇ve created a remix of the CamBody by adding ventilation slots. | Download free 3D printable STL models | [
"ventilation",
"slots"
] | 3D Printers > Other Printer Parts & Upgrades | [
"468086/images/image_1_compressed.jpg",
"468086/images/image_2_compressed.jpg"
] | [
"468086/stls/cam_body_vents.stl"
] | CC0 | https://www.printables.com/model/468086 | data_0042.tar |
441323 | Case for 0 - 25mm micrometer | <p>Printed with a 0.2mm layer height, allow it to cool fully before moving from the print bed. Carefully close the lid so that it doesn't break.</p> | [
"case",
"micrometer",
"toolstorage",
"micrometercase"
] | Hobby & Makers > Tools | [
"441323/images/image_1_compressed.jpg",
"441323/images/image_2_compressed.jpg"
] | [
"441323/stls/Micrometer.stl"
] | CC-BY | https://www.printables.com/model/441323 | data_0042.tar |
1102592 | Case for 100w powerbank module with 4s2p 21700 batteries | <p>Another powerbank case for a popular module from Aliexpress.</p><figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/1102592/rich_content/77d962ec-ff96-415e-a45a-518ac139e714/result.gif#%7B%22uuid%22%3A%2251280d35-8a99-4410-82c5-61ef6263ebf4%22%2C%22w%22%3A512%2C... | [
"diy",
"21700",
"powerbank",
"batteries",
"aliexpress"
] | Hobby & Makers > Electronics | [
"1102592/images/image_1_compressed.jpg",
"1102592/images/image_2_compressed.jpg",
"1102592/images/image_3_compressed.jpg",
"1102592/images/image_4_compressed.jpg",
"1102592/images/image_5_compressed.jpg",
"1102592/images/image_6_compressed.jpg",
"1102592/images/image_7_compressed.jpg",
"1102592/images... | [
"1102592/stls/powerbank_21700_4s2p-bottom_part.stl",
"1102592/stls/powerbank_21700_4s2p-top_part.stl"
] | GPL3.0 | https://www.printables.com/model/1102592 | data_0042.tar |
166430 | Case for Adafruit QT PY RP2040 and Seeed XIAO RP2040 (for ADXL345) | <h3>Case for Small RP2040 Boards</h3><p>This is a case for the small RP2040 boards such as the Adafruit QT PY RP2040 or the Seeed XIAO RP2040. These small boards based on the Raspberry Pi RP2040 microcontroller. They have a USB interface and are able to run Klipper firmware. I am using this to interface with an ADXL345... | [
"mount",
"adafruit",
"seeedstudio",
"klipper",
"adxl345",
"qtpy",
"rp2040",
"inputshaper",
"adafruitqtpy",
"seeeduinoxiaocase"
] | 3D Printers > Accessories | [
"166430/images/image_1_compressed.jpg",
"166430/images/image_2_compressed.jpg",
"166430/images/image_3_compressed.jpg",
"166430/images/image_4_compressed.jpg",
"166430/images/image_5_compressed.jpg"
] | [
"166430/stls/Smaller_Bottom.stl",
"166430/stls/Smaller_Top.stl"
] | CC-BY | https://www.printables.com/model/166430 | data_0042.tar |
286084 | Case for CNC Kitchen Threaded Inserts Soldering Tips - 2 colors "MMU2S" | [
"kitchen",
"iron",
"mmu2s",
"cnc",
"heat",
"inserts"
] | Hobby & Makers > Tools | [
"286084/images/image_1_compressed.jpg",
"286084/images/image_2_compressed.jpg",
"286084/images/image_3_compressed.jpg",
"286084/images/image_4_compressed.jpg"
] | [
"286084/stls/top_R.stl"
] | CC-BY | https://www.printables.com/model/286084 | data_0042.tar | |
541368 | Case for ESP32 S2 Mini and LD2410C | <p><strong>Please comment, rate, and post a make!</strong></p><p><strong>Update 1/19/2024:</strong> I've added a new back with a ball joint to give better flexibility with printing a single back for multiple mounting options.</p><p>A simple case for using an LD2410C radar sensors with an ESP32 S2 Mini. I've included a ... | [
"iot",
"esp32",
"esp",
"homeassistant",
"homeautomation",
"presencedetection",
"esphome",
"hubitat",
"esp32case",
"presence"
] | Gadgets > Other Gadgets | [
"541368/images/image_1_compressed.jpg",
"541368/images/image_2_compressed.jpg",
"541368/images/image_3_compressed.jpg",
"541368/images/image_4_compressed.jpg",
"541368/images/image_5_compressed.jpg",
"541368/images/image_6_compressed.jpg",
"541368/images/image_7_compressed.jpg",
"541368/images/image_8... | [
"541368/stls/Ball Joint.stl",
"541368/stls/Case.stl",
"541368/stls/Ceiling Corner Back.stl",
"541368/stls/Corner Back.stl",
"541368/stls/Down, Left, or Right Angled Back.stl",
"541368/stls/ESP32-S2 Mini and LD2410C.stl",
"541368/stls/Flat Back.stl",
"541368/stls/Left Angled Back.stl",
"541368/stls/R... | CC-BY | https://www.printables.com/model/541368 | data_0042.tar |
1236737 | Case For HY300 Projector with space for a remote control | <p>HY300 Projector Case with Remote Control Space for Comfortable Travel with space to place straps</p> | [
"case",
"projector",
"proyector",
"hy300",
"projectorcase",
"projectorhy300"
] | 3D Printers > Accessories | [
"1236737/images/image_1_compressed.jpg",
"1236737/images/image_2_compressed.jpg",
"1236737/images/image_3_compressed.jpg"
] | [
"1236737/stls/Proyector_Body_Mk2.stl",
"1236737/stls/Proyector_Cap_Mk2.stl"
] | CC-BY | https://www.printables.com/model/1236737 | data_0042.tar |
300629 | Case for Maker Badge | <p>The case is made to be working with a lanyard and LiPo battery. More details about Maker Badge could be found at https://github.com/dronecz/maker_badge.</p> | [] | Gadgets > Other Gadgets | [
"300629/images/image_1_compressed.jpg",
"300629/images/image_2_compressed.jpg"
] | [
"300629/stls/MakerBadge.stl"
] | CC-BY | https://www.printables.com/model/300629 | data_0042.tar |
915700 | Case for the BME 680 VOC/Temperature/Humidity/Air Pressure sensor | [
"sensor",
"temperature",
"humidity",
"esp32",
"temperaturesensor",
"humiditysensor",
"bme680",
"voc",
"bme680case"
] | Hobby & Makers > Electronics | [
"915700/images/image_1_compressed.jpg",
"915700/images/image_2_compressed.jpg",
"915700/images/image_3_compressed.jpg",
"915700/images/image_4_compressed.jpg"
] | [
"915700/stls/bme680.stl"
] | CC0 | https://www.printables.com/model/915700 | data_0042.tar | |
15469 | Case for USB boost buck converter with adjustable variable voltage output | <p>I bought an USB variable voltage regulator from Aliexpress (source: <a href="https://www.aliexpress.com/item/33008113832.html">https://www.aliexpress.com/item/33008113832.html</a>) and designed a case for it using Autodesk Fusion 360</p>
<h3>Print instructions</h3><h3>Category: Electronics Print Settings</h3>
<p><st... | [
"psu",
"case",
"usb",
"voltage",
"thingiverse",
"curtain",
"buckconverter",
"curtainstopper",
"voltageregulator",
"curtainrail",
"curtainrailstop",
"curtainrailstopper",
"boostconverter"
] | Hobby & Makers > Electronics | [
"15469/images/image_1_compressed.jpg",
"15469/images/image_2_compressed.jpg",
"15469/images/image_3_compressed.jpg"
] | [
"15469/stls/usb_psu_case_top_v4.stl",
"15469/stls/usb_psu_case_top_v4_15469.stl",
"15469/stls/usb_psu_case_v3.stl",
"15469/stls/usb_psu_case_v3_15469.stl"
] | CC-BY | https://www.printables.com/model/15469 | data_0042.tar |
977805 | Cassette Tape | <p>I designed a 3D model of a cassette tape, capturing the nostalgic look and feel of the iconic audio format. The model includes detailed features like the tape reels, label area, and even the grooves on the casing, making it a perfect blend of retro aesthetics and modern 3D design.</p><p> </p><p>Included the STE... | [
"music",
"vintage",
"tape",
"cassette",
"deck"
] | Hobby & Makers > Music | [
"977805/images/image_1_compressed.jpg",
"977805/images/image_2_compressed.jpg",
"977805/images/image_3_compressed.jpg"
] | [
"977805/stls/Cassette.stl"
] | CC-BY | https://www.printables.com/model/977805 | data_0042.tar |
151174 | Cast Iron Dutch Oven / Frying Pan Lid Spacer |
<p>I made the mistake of putting a lid on my Lodge cast iron dutch oven before putting it away and the oil inside the oven went bad. After scrubbing it out and re-seasoning it, I designed and printed these spacers to keep the lid from sealing on the dutch oven and crating the same problem again. It also works for th... | [
"lid",
"support",
"spacer",
"thingiverse",
"gap"
] | Household > Kitchen | [
"151174/images/image_1_compressed.jpg",
"151174/images/image_2_compressed.jpg",
"151174/images/image_3_compressed.jpg",
"151174/images/image_4_compressed.jpg",
"151174/images/image_5_compressed.jpg"
] | [
"151174/stls/Cast_Iron_Lid_Support_001.stl"
] | CC-BY | https://www.printables.com/model/151174 | data_0042.tar |
80494 | Cast Scratcher |
<p>Someone recently injured themselves and has to wear a cast. I made this simple tool for them to scratch down inside the cast. It's probably not advised to do but an itch you scratch will drive you crazy and I'd rather them use something like this that with smooth ends instead of a coat hanger or something.</p>
<p... | [
"medical",
"thingiverse",
"scratcher",
"scratch",
"cast",
"itch",
"itchy"
] | Hobby & Makers > Tools | [
"80494/images/image_1_compressed.jpg"
] | [
"80494/stls/castscratcher.stl"
] | CC-BY | https://www.printables.com/model/80494 | data_0042.tar |
177959 | Casting Runes and blanks for risting or game-tokens | <p>Included here is a full set of the <a href="https://en.wikipedia.org/wiki/Elder_Futhark">Elder Futhark Runic alphabet</a> carved into 24 unique hand modeled and etched runestones, as well as a set of 22 unique blank runestones for risting your own, or making custom game-pieces (mahjong, dominoes, Jenga)</p><p><stron... | [
"nordic",
"viking",
"celtic",
"tokens",
"divination",
"runes",
"runestone"
] | Toys & Games > Other Toys & Games | [
"177959/images/image_1_compressed.jpg",
"177959/images/image_2_compressed.jpg"
] | [
"177959/stls/Elder Futhark Set.stl",
"177959/stls/runestones_22_Blank_Stones+1 unweathered.stl",
"177959/stls/runestone_A.stl",
"177959/stls/runestone_B.stl",
"177959/stls/runestone_BLANK_02.stl",
"177959/stls/runestone_BLANK_03.stl",
"177959/stls/runestone_BLANK_04.stl",
"177959/stls/runestone_BLANK_... | CC-BY | https://www.printables.com/model/177959 | data_0042.tar |
1063607 | Cat - wall art | [
"decoration",
"wall",
"cat",
"art",
"wallart"
] | Household > Home Decor | [
"1063607/images/image_1_compressed.jpg",
"1063607/images/image_2_compressed.jpg",
"1063607/images/image_3_compressed.jpg"
] | [
"1063607/stls/cat A1 mini 3mf.stl",
"1063607/stls/cat A1 mini stl.stl",
"1063607/stls/cat p1 3MF.stl",
"1063607/stls/cat p1 STL.stl"
] | CC-BY | https://www.printables.com/model/1063607 | data_0042.tar | |
322388 | cat ball with strong walls | <p>The available toys are thin-walled so these balls have thick walls which <strong>require 100% infill </strong>and now when I step on this ball it is fine, they don't crack. The thinner versions broke when I stepped on them, and now they stand up to being stepped on multiple times</p><p><br>I paused printing in the m... | [
"toy",
"cat",
"toys",
"household",
"pets",
"cattoy"
] | Household > Pets | [
"322388/images/image_1_compressed.jpg",
"322388/images/image_2_compressed.jpg",
"322388/images/image_3_compressed.jpg"
] | [
"322388/stls/big ball for cat.stl",
"322388/stls/small ball for cat.stl"
] | GPL3.0 | https://www.printables.com/model/322388 | data_0042.tar |
36845 | Cat Bookmark | <p>Bookmark for cat lovers!</p>
<p>Use 0.1mm or 0.05mm layers if you want to make this out of multiple colors (or scale the stl file up 2x to use 0.2mm thick layers).</p>
<p>There is purposefully a clear area where someone's initials could be added (such as could be done with free Tinkercad)</p>
<h3>Print instructions<... | [
"multicolor",
"cat",
"bookmark",
"thingiverse",
"bookmarks",
"bookmarker"
] | Art & Design > 2D Plates & Logos | [
"36845/images/image_1_compressed.jpg",
"36845/images/image_2_compressed.jpg",
"36845/images/image_3_compressed.jpg"
] | [
"36845/stls/catbookmark.stl"
] | CC-BY | https://www.printables.com/model/36845 | data_0042.tar |
123851 | Cat Button 🐱 | <p>It is a button in the shape of a cat. 😻😸😻</p> | [
"cat",
"button",
"3dprintedbuttons"
] | Fashion > Other Fashion Accessories | [
"123851/images/image_1_compressed.jpg"
] | [
"123851/stls/cat_button.stl"
] | CC-BY | https://www.printables.com/model/123851 | data_0042.tar |
888028 | Cat Cookie Cutter Set | <p>Cat Cookie Cutter Set</p><p>The cookie cutter is around 75mm</p><p>Its a 2 piece item, one for cutting the cookie dough and one for modeling .</p><p>Print with 100% infill</p><p>If you have any idea/request let me know :D</p> | [
"cat",
"cute",
"cookie",
"cutter",
"cookiecutter"
] | Household > Kitchen | [
"888028/images/image_1_compressed.jpg",
"888028/images/image_2_compressed.jpg",
"888028/images/image_3_compressed.jpg",
"888028/images/image_4_compressed.jpg",
"888028/images/image_5_compressed.jpg"
] | [
"888028/stls/cat1(1).stl",
"888028/stls/cat1.stl",
"888028/stls/cat2(1).stl",
"888028/stls/cat2.stl",
"888028/stls/cat3(1).stl",
"888028/stls/catsleeping-(1).stl",
"888028/stls/catsleeping.stl"
] | CC-BY | https://www.printables.com/model/888028 | data_0042.tar |
1750213 | Cat Decor | [
"decoration",
"wall",
"cat",
"decor",
"funny",
"wallmount",
"home",
"cats",
"homedecor",
"wallart"
] | Art & Design > Wall-mounted | [
"1750213/images/image_1_compressed.jpg"
] | [
"1750213/stls/cat.stl"
] | CC-BY | https://www.printables.com/model/1750213 | data_0042.tar | |
39263 | Cat eppendorf tube holder | <p>Inspired by "Dachshund eppendorf tube holder" by jrletourneau (<a href="https://www.thingiverse.com/thing:3116138">https://www.thingiverse.com/thing:3116138</a>) I designed this tube holder which holds 6x 1.5 mL Eppis. Made in Fusion 360.</p><p>Because cat people do lab work too.</p><p>Enjoy.<br><br>EDIT 2024-08-16:... | [
"holder",
"cat",
"stand",
"lab",
"tube",
"laboratory",
"thingiverse",
"catsitting",
"eppendorf",
"eppendorfholder",
"eppendorftube",
"eppi",
"longcat",
"reagent"
] | Learning > Chemistry & Biology | [
"39263/images/image_1_compressed.jpg"
] | [
"39263/stls/alert-cat-1.stl",
"39263/stls/Long Cat.stl",
"39263/stls/long_cat_6_eppis.stl"
] | CC-BY | https://www.printables.com/model/39263 | data_0042.tar |
409325 | Cat Flower Pot | <p>Cat themed flower pot based on a friend's kid's drawing. Print with suports.</p> | [
"cat",
"planter",
"plantpot",
"flowerpot"
] | Household > Outdoor & Garden | [
"409325/images/image_1_compressed.jpg",
"409325/images/image_2_compressed.jpg"
] | [
"409325/stls/Cat Plant Pot v8.stl"
] | CC-BY | https://www.printables.com/model/409325 | data_0042.tar |
256863 | Cat Friendly Slow-Feeder Bowl | <p>The original design was much too deep for cat food and smaller cat faces. Dogs can get in the original grooves with their tongues but cats can't. So I changed the height of the ridges. Plus I removed and smoothed a lot of the sharp edges and points.<br><br>Original also suggested .3mm printing but printing at .2mm m... | [
"puzzle",
"cat",
"bowl",
"food",
"feed",
"slow"
] | Household > Pets | [
"256863/images/image_1_compressed.jpg"
] | [
"256863/stls/Slow Cat Food Bowl.stl"
] | CC-BY | https://www.printables.com/model/256863 | data_0042.tar |
327518 | Cat gravestone | <p>A tombstone with cat ears and face with room to add an inscription.</p><p><br>I recommend printing the gravestone flat on it's back with the cat facing upwards.</p> | [
"cat",
"kitty",
"headstone",
"tombstone",
"gravestone"
] | Seasonal designs > Autumn & Halloween | [
"327518/images/image_1_compressed.jpg"
] | [
"327518/stls/Base.stl",
"327518/stls/Gravestone.stl"
] | CC0 | https://www.printables.com/model/327518 | data_0042.tar |
1278393 | Cat HeartBeat 2d home decor | <p>Cute Cat heartbeat sign, 2d home decor</p> | [
"cat",
"decor",
"wallmount",
"home",
"heart",
"2d",
"mom",
"beat",
"heatbeat"
] | Art & Design > 2D Plates & Logos | [
"1278393/images/image_1_compressed.jpg"
] | [
"1278393/stls/cat_beat.stl"
] | CC0 | https://www.printables.com/model/1278393 | data_0042.tar |
810656 | Cat key Hook - better wall fixation and customizable face plate | <p><strong>V4 NOTE</strong> : I've been struggling to make changing plates easier, without all the small pegs breaking. So I finally dropped the pegs for a slot on the base, and its counterpart on the plate. Added a (optional) small lock to fill up the slot once the plate has been put in place. The V4 base is fully com... | [] | Household > Home Decor | [
"810656/images/image_1_compressed.jpg",
"810656/images/image_10_compressed.jpg",
"810656/images/image_11_compressed.jpg",
"810656/images/image_12_compressed.jpg",
"810656/images/image_13_compressed.jpg",
"810656/images/image_14_compressed.jpg",
"810656/images/image_2_compressed.jpg",
"810656/images/im... | [
"810656/stls/1 keyhook frame.stl",
"810656/stls/2 keyhooks frame.stl",
"810656/stls/3 keyhooks frame.stl",
"810656/stls/4 keyhooks frame.stl",
"810656/stls/5 keyhooks frame.stl",
"810656/stls/Base V2B.stl",
"810656/stls/Base-V4.stl",
"810656/stls/Car plate.stl",
"810656/stls/cat.stl",
"810656/stls... | CC-BY | https://www.printables.com/model/810656 | data_0042.tar |
1386824 | Cat Keychain | [] | Toys & Games > Action Figures & Statues | [
"1386824/images/image_1_compressed.jpg"
] | [
"1386824/stls/Cat Keychain.stl"
] | CC0 | https://www.printables.com/model/1386824 | data_0042.tar | |
54335 | Cat Phone Stand | <p>My friend asked me to model and print this stand. After finished printing i decided to share it with you. So here it is :)</p>
<h3>Print instructions</h3><h3>Category: Mobile Phone Summary</h3>
<p>My friend asked me to model and print this stand. After finished printing i decided to share it with you. So here it is ... | [
"thingiverse"
] | Gadgets > Portable Devices | [
"54335/images/image_1_compressed.jpg",
"54335/images/image_2_compressed.jpg",
"54335/images/image_3_compressed.jpg"
] | [
"54335/stls/_cat_phone_stand.stl"
] | CC-BY | https://www.printables.com/model/54335 | data_0042.tar |
107170 | Cat Pyramid |
<p>Cat Pyramid.<br/>
Optionally: If you print another cat of the same size (2inches in length) you can stack it on top.</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>I3 MK3S</p></div><strong>Rafts:</strong></p>
... | [
"cat",
"cool",
"kitten",
"thingiverse",
"illusion"
] | Hobby & Makers > Other Ideas | [
"107170/images/image_1_compressed.jpg",
"107170/images/image_2_compressed.jpg",
"107170/images/image_3_compressed.jpg",
"107170/images/image_4_compressed.jpg"
] | [
"107170/stls/Stretching_Cat_remixed_107170.stl"
] | CC-BY | https://www.printables.com/model/107170 | data_0042.tar |
1232051 | cat scratching balls keychain | [
"cat",
"cute",
"keychain"
] | 3D Printers > Accessories | [
"1232051/images/image_1_compressed.jpg",
"1232051/images/image_2_compressed.jpg",
"1232051/images/image_3_compressed.jpg"
] | [
"1232051/stls/1.stl",
"1232051/stls/2.stl",
"1232051/stls/3.stl",
"1232051/stls/4.stl"
] | CC0 | https://www.printables.com/model/1232051 | data_0042.tar | |
453318 | Cat Silhouette Bookend Minimalist | <p>I remixed the model from Bugsy515's Cat Silhouette Bookend, reducing the footprint around the cat and removing the vertical wall.</p><p>In the photos, I reduced the height to 110mm for use with Manga. The function of this bookend is to prevent books from falling, so there is no need for the cat pawn to exert a lot o... | [
"cat",
"book",
"bookend",
"bookstand"
] | Household > Home Decor | [
"453318/images/image_1_compressed.jpg",
"453318/images/image_2_compressed.jpg"
] | [
"453318/stls/Serre-livre v1.stl",
"453318/stls/Serre-livre V2 v1.stl"
] | CC-BY | https://www.printables.com/model/453318 | data_0042.tar |
74456 | Cat spinner (toy) | <p>Designované na ložisko o vnějším průměru 28 mm, vnitřním průměru 12 mm a výšku 8 mm.</p> | [
"toy",
"pet",
"cat",
"fidgettoy",
"fidgetspinner"
] | Household > Pets | [
"74456/images/image_1_compressed.jpg",
"74456/images/image_2_compressed.jpg"
] | [
"74456/stls/Cat_spinner - vicko.stl",
"74456/stls/Cat_spinner_spinner.stl",
"74456/stls/Cat_spinner_stojan.stl"
] | CC0 | https://www.printables.com/model/74456 | data_0042.tar |
356643 | Cat Stretch Candy Bowl |
<p>This is a remix of one of my own designs, Cat stretch.</p>
<p>I reduced the cat mesh to a lower poly count, and then copy rotated them into 3 positions forming a circle, and then rested a nice sized (almost 8" in diameter) dish balanced between their tail and nose. This model should scale well, should it not fit ... | [
"halloween",
"cat",
"candy",
"halloweendecoration",
"twocolor",
"thingiverse",
"candybowl",
"2color",
"candydish",
"catstretch",
"2colors",
"twocolors"
] | Household > Home Decor | [
"356643/images/image_1_compressed.jpg",
"356643/images/image_2_compressed.jpg",
"356643/images/image_3_compressed.jpg",
"356643/images/image_4_compressed.jpg"
] | [
"356643/stls/catstretch-base.stl",
"356643/stls/catstretch-bowl.stl",
"356643/stls/catstretch-vase-1pc.stl",
"356643/stls/cats_w_base.stl"
] | CC-BY | https://www.printables.com/model/356643 | data_0042.tar |
127376 | Cat toy with ball inside | <p>Here is a cat toy with inner ball built inside of it. my cat goes crazy about this one! Brim and some supports are recommended, so you need to clean up the print afterwards to set free the ball inside. have fun!</p> | [
"cat",
"toys",
"sound"
] | Toys & Games > Other Toys & Games | [
"127376/images/image_1_compressed.jpg"
] | [
"127376/stls/lele2.stl"
] | GPL2.0 | https://www.printables.com/model/127376 | data_0042.tar |
219852 | Cat Toy With Rattle | <p>I have added two small balls inside the toy which makes a rattle sound. This makes it interesting for the cats.Cat toy v3 have increased thickness of the sphere from 2mm to 3.2mm. Increased thickness can give more strength compared to cat toy v2.</p><p> You can print this in single step and without supports but... | [
"pet",
"cat",
"toys",
"cats",
"thingiverse",
"pets"
] | Household > Pets | [
"219852/images/image_1_compressed.jpg",
"219852/images/image_2_compressed.jpg",
"219852/images/image_3_compressed.jpg"
] | [
"219852/stls/CE3_cat toy v3 combined.stl",
"219852/stls/CE3_cat toy v3.stl",
"219852/stls/CE3_cat_ball-v2.stl"
] | CC-BY | https://www.printables.com/model/219852 | data_0042.tar |
134739 | Cat track | <p>A simple and easy to print cat track for your cat. It fits standard 40mm ping pong balls (1mm clearance).<br>Balls bought from amazon <a href="https://www.amazon.se/gp/product/B07PPFTGNN/">here</a>.</p><figure class="image"><img src="https://media.printables.com/media/prints/134739/rich_content/faa5f582-1f69-481d-85... | [
"toy",
"cat"
] | Household > Pets | [
"134739/images/image_1_compressed.jpg",
"134739/images/image_2_compressed.jpg",
"134739/images/image_3_compressed.jpg",
"134739/images/image_4_compressed.jpg",
"134739/images/image_5_compressed.jpg",
"134739/images/image_6_compressed.jpg",
"134739/images/image_7_compressed.jpg"
] | [
"134739/stls/cat_track_mini.stl",
"134739/stls/cat_track_test_piece.stl",
"134739/stls/cat_track_without_cat_icons.stl",
"134739/stls/cat_track_with_one_cat_icon.stl",
"134739/stls/cat_track_with_ten_cat_icons.stl",
"134739/stls/cat_track_with_three_cat_icons.stl"
] | CC-BY | https://www.printables.com/model/134739 | data_0042.tar |
480117 | Cat Treat Puzzle spin top | <p>as title</p><p>fast easy print<br>use cura to split model into parts and print each half</p><p>add whatever top decoration or holes if desired</p> | [
"toy",
"puzzle",
"cat",
"treat"
] | Learning > Other 3D Objects for Learning | [
"480117/images/image_1_compressed.jpg",
"480117/images/image_2_compressed.jpg"
] | [
"480117/stls/cat treat spin base alt.stl",
"480117/stls/cat treat spin.stl"
] | CC0 | https://www.printables.com/model/480117 | data_0042.tar |
360290 | Catan hexes and ocean | <p>What year is it, 2008? We're still obsessed with Settlers of Catan, so much so we needed a custom game board. Unlike the more elaborate 3D sculptured pieces out there, this one requires no painting if you print in different color filaments, and fits into the original box (if you find a new home for the pieces they'r... | [
"catan",
"settlers"
] | Toys & Games > Board Games | [
"360290/images/image_1_compressed.jpg",
"360290/images/image_2_compressed.jpg"
] | [
"360290/stls/BrickHex.stl",
"360290/stls/OceanHexDock.stl",
"360290/stls/OceanHexDock2.stl",
"360290/stls/RockHex.stl",
"360290/stls/SheepHex.stl",
"360290/stls/TreeHex.stl",
"360290/stls/WheatHex.stl"
] | CC-BY | https://www.printables.com/model/360290 | data_0042.tar |
41195 | catan player components box | <p>This a catan player's components box, fits inside the original game's box.<br>There are 2 version:<br>v1 - without peek hole<br>v2 - with peek hole (both on the side and on the lid)</p><p>Great Thanks to RedFrez(thingiverse) for sharing the f3d file which made this box possible:<br><a href="https://www.thingiverse.c... | [
"box",
"hinge",
"boardgame",
"catan",
"thingiverse",
"settlersofcatan",
"boardgamecomponents"
] | Toys & Games > Board Games | [
"41195/images/image_1_compressed.jpg",
"41195/images/image_2_compressed.jpg",
"41195/images/image_3_compressed.jpg",
"41195/images/image_4_compressed.jpg",
"41195/images/image_5_compressed.jpg"
] | [
"41195/stls/catan_player_components_box_v1.stl",
"41195/stls/catan_player_components_box_v2.stl"
] | CC-BY | https://www.printables.com/model/41195 | data_0042.tar |
74453 | Catapult (M&M dispenser) | <p>OpenSCAD version of (yet another) catapult. Should print in place without supports.</p> | [] | Toys & Games > Other Toys & Games | [
"74453/images/image_1_compressed.jpg",
"74453/images/image_2_compressed.jpg"
] | [
"74453/stls/catapult.06.stl"
] | CC-BY | https://www.printables.com/model/74453 | data_0042.tar |
232556 | Cathedral Game - Version with keep-in-place bumps and holes | <p>I found that the pieces in <a href="https://www.thingiverse.com/thing:3859172">Aki7's very nice model</a> tended to slide around at the slightest touch. I added small bumps to the game board and cut out small holes in the bottom of all the pieces so now everything stays nicely in place.</p><p>I also used <a href="ht... | [
"boardgames",
"boardgame",
"cathedral",
"thingiverse",
"tabletopgaming"
] | Toys & Games > Other Toys & Games | [
"232556/images/image_1_compressed.jpg"
] | [
"232556/stls/Cathedral_BottomRight_Player_Holes.stl",
"232556/stls/Cathedral_box.stl",
"232556/stls/Cathedral_Cathedral_Neutral_Holes.stl",
"232556/stls/Cathedral_GameBoard_Bumps.stl",
"232556/stls/Cathedral_lid.stl",
"232556/stls/Cathedral_lid_embossed.stl",
"232556/stls/Cathedral_lid_text.stl",
"232... | CC-BY | https://www.printables.com/model/232556 | data_0042.tar |
1499039 | Catness Tree Ornament | <p>Bring some feline charm to your Christmas tree this year with this adorable <strong>B&W</strong> <strong>Cat Ornament</strong>!</p><p>This sweet black-and-white kitty with big curious eyes and a playfully curled tail is ready to hang among the lights and tinsel. Perfect for cat lovers, it adds a whimsical and mo... | [
"decoration",
"christmas",
"cat",
"christmasornament",
"christmasdecoration"
] | Seasonal designs > Winter & Christmas & New Year's | [
"1499039/images/image_1_compressed.jpg",
"1499039/images/image_2_compressed.jpg"
] | [
"1499039/stls/Black.stl",
"1499039/stls/Catness.stl",
"1499039/stls/White.stl"
] | CC-BY | https://www.printables.com/model/1499039 | data_0042.tar |
949179 | Catoru Gojo | [
"cat",
"jjk",
"gojo"
] | Toys & Games > Action Figures & Statues | [
"949179/images/image_1_compressed.jpg",
"949179/images/image_2_compressed.jpg",
"949179/images/image_3_compressed.jpg"
] | [
"949179/stls/Catoru Gojo.stl"
] | CC-BY | https://www.printables.com/model/949179 | data_0042.tar | |
10439 | Caverna Adventure Tracker | <p>I took the click tracker and addressed the two most common issues from the previous makes: the click wheel is too difficult to adjust the tracker numbers and alignment isn't as exact as it could be. I added alignment tab/slot to ensure top and bottom are put together accurately without too much fiddling. I also decr... | [
"game",
"boardgames",
"counter",
"accessory",
"boardgame",
"tracker",
"thingiverse",
"caverna",
"tally"
] | Toys & Games > Board Games | [
"10439/images/image_1_compressed.jpg",
"10439/images/image_2_compressed.jpg"
] | [
"10439/stls/caverna_adventure_clicker.stl"
] | CC-BY | https://www.printables.com/model/10439 | data_0042.tar |
573034 | CB1 heatsink 4020 fan mount | <p>There are already very good alternatives available, but none of them seem to force the air flow on the fins of the BTT-made CB1 heatsink.<br>This version tries to make sure that all the air exits only through the fin channels (give or take) for maximum cooling efficiency.<br><br>4x M2.5*25 FHCS required for mounting... | [
"mount",
"fan",
"heatsink",
"4020",
"cb1"
] | 3D Printers > Other Printer Parts & Upgrades | [
"573034/images/image_1_compressed.jpg",
"573034/images/image_2_compressed.jpg",
"573034/images/image_3_compressed.jpg"
] | [
"573034/stls/4020 Duct.stl"
] | CC-BY | https://www.printables.com/model/573034 | data_0042.tar |
1750520 | CC1 Riser and Lowered Canvas | <p>I lowered the canvas and created a riser that puts the height around 670mm including handle similarly to the CC2 Emoji.</p><p>The top spool brackets are lowered and the rear bracket has a shield to protect the canvas cable when swapping spools.</p><p>I cut 70mm off my ptfe tubes to lessen the bend when in the back r... | [
"canvas",
"riser",
"cc1"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1750520/images/image_1_compressed.jpg",
"1750520/images/image_2_compressed.jpg",
"1750520/images/image_3_compressed.jpg",
"1750520/images/image_4_compressed.jpg",
"1750520/images/image_5_compressed.jpg",
"1750520/images/image_6_compressed.jpg",
"1750520/images/image_7_compressed.jpg"
] | [
"1750520/stls/Canvas Bracket and Riser.stl",
"1750520/stls/Canvas Lowering.stl",
"1750520/stls/Riser.stl"
] | CC-BY | https://www.printables.com/model/1750520 | data_0042.tar |
1025299 | CCPD Bank Card | <p>This model was designed for the LM Show Christmas Community Print Drive 2024. Add a color swap at 3.6mm height (layer 18 if printing at 0.20mm layer height).</p><p> </p><p><strong>Notes: </strong></p><ul><li><strong>If you are using “Only one wall on top surfaces” setting, you may need to adjust the “One w... | [
"card",
"bank",
"lmshow",
"ccpd"
] | Toys & Games > Other Toys & Games | [
"1025299/images/image_1_compressed.jpg"
] | [
"1025299/stls/CCPD_Bank_card.stl"
] | CC-BY | https://www.printables.com/model/1025299 | data_0042.tar |
94091 | CD/DVD Holder | <p>A CD/DVD Holder for huge collections. Derived from the classic spools of CD Blanks from the past.<br>Contains 2 Files, one for the bottom with spool rod and one for the top to close the whole thing.<br>With locking mechanism, just turn the two parts and prints without support.<br><br><br><strong>Edit 07.03.2025</str... | [
"holder",
"dvd",
"blueray",
"cd"
] | Household > Office | [
"94091/images/image_1_compressed.jpg"
] | [
"94091/stls/CD Big Lower.stl",
"94091/stls/CD Big Upper.stl",
"94091/stls/CD oben.stl",
"94091/stls/CD Unten.stl"
] | CC-BY | https://www.printables.com/model/94091 | data_0042.tar |
1404045 | Celtic Knot Keychain | <p>Celtic Knot Keychain</p> | [] | Hobby & Makers > Organizers | [
"1404045/images/image_1_compressed.jpg"
] | [
"1404045/stls/9c74f731-f76b-4304-8a37-fc9b386d679c.stl"
] | CC0 | https://www.printables.com/model/1404045 | data_0042.tar |
1577352 | Centauri Carbon 2 Screen Bezel | <p>This is a trim piece to go around the touch screen/display for the Centauri Carbon 2 printer. Perfect to add a bit of color to your printer. Inspired by a similar design for the original CC1.</p><p>No supports or brim needed</p><p>Print time ~13min</p><p>Layer height: 0.2mm</p><p>I tested it with PLA and... | [
"display",
"ring",
"trim",
"touchscreen",
"bezel",
"centauri",
"centauricarbon",
"centauricarbon2"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1577352/images/image_1_compressed.jpg",
"1577352/images/image_2_compressed.jpg"
] | [
"1577352/stls/ECC2_Screen_Bezel.stl"
] | CC-BY | https://www.printables.com/model/1577352 | data_0042.tar |
1429041 | Centauri Carbon Bed Guide for Bambu sized plates | <p>No-support, easy-to-print bed guides designed for Bambu-sized build plates of <strong>256mm x 256mm</strong>. Since the default Centauri Carbon plate measures <strong>257mm x 257mm</strong>, this model is especially useful for sliding smaller plates in and out with ease and precision. The guides are printed upside d... | [
"plate",
"bed",
"guide",
"biqu",
"elegoo",
"centauricarbon"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1429041/images/image_1_compressed.jpg",
"1429041/images/image_2_compressed.jpg",
"1429041/images/image_3_compressed.jpg"
] | [
"1429041/stls/a4-guides-nov.stl",
"1429041/stls/a4-guides.stl"
] | CC-BY | https://www.printables.com/model/1429041 | data_0042.tar |
1500027 | Centauri Carbon H2D nozzle adapter | <p>ATTENTION!</p><p>Before reporting this design again as copy of someone else because this looks similar please try to make your own version that doesn't look similar. You can't change the mounting points, filament path or nozzle height if you want to keep the part functional and there is very limited space so you can... | [] | 3D Printers > Other Printer Parts & Upgrades | [
"1500027/images/image_1_compressed.jpg",
"1500027/images/image_10_compressed.jpg",
"1500027/images/image_11_compressed.jpg",
"1500027/images/image_12_compressed.jpg",
"1500027/images/image_13_compressed.jpg",
"1500027/images/image_14_compressed.jpg",
"1500027/images/image_2_compressed.jpg",
"1500027/i... | [] | CC0 | https://www.printables.com/model/1500027 | data_0042.tar |
1319314 | Centauri Carbon Internal 1kg Spool Mount Kit | <p>Mount up to 6.5 cm wide 1 kg spools inside your Centauri Carbon. Print two each of the 5 mm vertical and horizontal spacers for the right-hand wall. You may fit the spool without removing the studs but that will require that the bed is moved out of the way to remove the spool/holder. The studs may be removed with a ... | [
"filament",
"spoolholder",
"filamentspoolholder",
"spoolmount",
"carbon",
"filamentdrybox",
"elegoo",
"printermods",
"printerupgrades",
"corexyprinter",
"centauri",
"centauricarbon"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1319314/images/image_1_compressed.jpg",
"1319314/images/image_2_compressed.jpg",
"1319314/images/image_3_compressed.jpg",
"1319314/images/image_4_compressed.jpg",
"1319314/images/image_5_compressed.jpg",
"1319314/images/image_6_compressed.jpg",
"1319314/images/image_7_compressed.jpg",
"1319314/images... | [
"1319314/stls/ECC04-Internal-Spool-Kit.stl",
"1319314/stls/Internal-Twist-Lock-Spool-Holder-v2.stl"
] | CC-BY | https://www.printables.com/model/1319314 | data_0042.tar |
1427000 | Centauri carbon magnetic Aux and exhaust fan vent covers | <p>Magnetic covers that mesh perfectly with the slots in the vent fan. The two versions of the model are for use with 6x3 standard voron size magnets or thinner 6x2 or 6x1.5 magnets.</p> | [
"cover",
"vent",
"exhaust",
"exhaustfan",
"auxfan",
"auxiliaryfan",
"centauricarbon",
"elegoocentauricarbon"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1427000/images/image_1_compressed.jpg"
] | [
"1427000/stls/vent covers 2mm magnets.step.stl",
"1427000/stls/vent covers 3mm magnets.step.stl"
] | CC-BY | https://www.printables.com/model/1427000 | data_0042.tar |
1432371 | Centauri Carbon USB Cable Strain Relief | <h5>UPDATE: Please use the <a href="https://www.printables.com/model/1435678-centauri-carbon-print-head-usb-strain-relief">remix </a>of this model that curves inside the PTFE tube as we believe the angles are better for both the PTFE tube and the USB cable.</h5><p> </p><p>The bending radius of the USB cable from t... | [] | 3D Printers > Other Printer Parts & Upgrades | [
"1432371/images/image_1_compressed.jpg",
"1432371/images/image_2_compressed.jpg",
"1432371/images/image_3_compressed.jpg",
"1432371/images/image_4_compressed.jpg"
] | [
"1432371/stls/Cable Support - .2mm Nozzle.stl",
"1432371/stls/Cable Support.stl"
] | CC-BY | https://www.printables.com/model/1432371 | data_0042.tar |
467043 | Center finder tool | <p><strong>7.5mm hole for the pen</strong></p><p><i>I can add more pen diameters write it in the comments</i></p><p>Hardware:</p><ul><li>M6 x 20mm/25mm - 6pcs</li><li>M6 self-locking nut - 6pcs</li></ul><p> </p><p>Settings:</p><ul><li>0.20mm Standard <br><i>+custom settings:</i></li><li><i>Wall loops <strong>... | [
"tool",
"centerfinder",
"centering",
"centeringtool"
] | Hobby & Makers > Tools | [
"467043/images/image_1_compressed.jpg"
] | [
"467043/stls/middle with hole.stl",
"467043/stls/middle.stl",
"467043/stls/side.stl"
] | CC-BY | https://www.printables.com/model/467043 | data_0042.tar |
507561 | Cereal box filament roller with 608 bearings. | <p>Designed to fit the 2 pack cereal boxes from Walmart (photo of packaging above. )</p><p>It uses 2-608 bearings and 4-m3x10 screws with nuts. It could be done without the nuts, but better safe than sorry. </p><p>*The bearings are a loose fit in this version, either use the recommended skirting as a shim, or glue... | [
"filamentspoolholder",
"cerealbox"
] | 3D Printers > Accessories | [
"507561/images/image_1_compressed.jpg",
"507561/images/image_2_compressed.jpg",
"507561/images/image_3_compressed.jpg",
"507561/images/image_4_compressed.jpg",
"507561/images/image_5_compressed.jpg"
] | [
"507561/stls/ContainerSpoolHolder - 25mm Roller.stl",
"507561/stls/ContainerSpoolHolder - 45mm Roller.stl",
"507561/stls/ContainerSpoolHolder - BearingPin.stl",
"507561/stls/ContainerSpoolHolder - ExternalMount.stl",
"507561/stls/ContainerSpoolHolder - Internal Mount.stl"
] | CC-BY | https://www.printables.com/model/507561 | data_0042.tar |
1280350 | Cereal Container Filament Dry Box Lid (PARALLEL TUSH) | <p>I tried many different variations of a dry box spooler system. All the ones with printed rollers caused the spool not to roll correctly. The ones with metal shafts caused the spool to become misaligned and not stay centered. Every design I tested would eventually touch the container wall and jam.</p><p>I have always... | [] | 3D Printers > Accessories | [
"1280350/images/image_1_compressed.jpg",
"1280350/images/image_2_compressed.jpg",
"1280350/images/image_3_compressed.jpg",
"1280350/images/image_4_compressed.jpg"
] | [
"1280350/stls/Base_Bottom_V2.stl",
"1280350/stls/Base_Top_HYGROMETER_v2.stl",
"1280350/stls/Base_Top_Sled_v2.stl",
"1280350/stls/Base_Top_V2.stl",
"1280350/stls/Side_Grate_Cover_X2_V2.stl",
"1280350/stls/The_Ultimate_Spool_Holder_LowProfile_X4_V2.stl",
"1280350/stls/TushHolder_LEFT_V2.stl",
"1280350/s... | CC-BY | https://www.printables.com/model/1280350 | data_0042.tar |
1251590 | CFS Riser for K1 Max CFS upgrade kit for NorcoT lid riser by TonyF and Gabe_Nick | <p>Please make sure to use PETG as this will be holding nearly 6kg of weight</p><p>Make sure to follow this exact settings to make sure the strength and a smooth print</p><p>Material : PETG or PETG-CF </p><p>Infill : 30%</p><p>Thickness 0.2mm</p><p>Support : ON</p><p> </p><p>And you will need :</p><p>Aluminum... | [
"k1max",
"k1maxriser",
"cfsriser",
"cfsupgradekit"
] | 3D Printers > Creality Parts & Upgrades | [
"1251590/images/image_1_compressed.jpg",
"1251590/images/image_2_compressed.jpg",
"1251590/images/image_3_compressed.jpg",
"1251590/images/image_4_compressed.jpg",
"1251590/images/image_5_compressed.jpg",
"1251590/images/image_6_compressed.jpg",
"1251590/images/image_7_compressed.jpg",
"1251590/images... | [
"1251590/stls/CFS Riser bar Left.stl",
"1251590/stls/CFS Riser bar Right.stl"
] | CC0 | https://www.printables.com/model/1251590 | data_0042.tar |
249920 | CH340 CH340G box | <p>Remix from https://www.thingiverse.com/thing:2527773</p><p>Added locking tab so that no glue is needed. Tight fit.</p><p>Increased windows for clearer view of pinout and voltage.</p> | [
"tasmota",
"ch340",
"ch340g"
] | Gadgets > Other Gadgets | [
"249920/images/image_1_compressed.jpg"
] | [
"249920/stls/CH340G_Bottom.stl",
"249920/stls/CH340G_Top.stl"
] | GPL3.0 | https://www.printables.com/model/249920 | data_0042.tar |
947861 | Chain | <p>Single rings that join together to form a chain of the desired length</p><p>Anelli singoli che si uniscono per formare una catena della lunghezza desiderata</p> | [
"chainmail",
"chain",
"lock",
"catena"
] | Costumes & Accessories > Cosplay & Costumes in general | [
"947861/images/image_1_compressed.jpg",
"947861/images/image_2_compressed.jpg"
] | [
"947861/stls/Catena Pezzo.stl",
"947861/stls/Catena.stl"
] | CC-BY | https://www.printables.com/model/947861 | data_0042.tar |
119225 | Chain Link Fidget |
<p>I was looking a various fidgets and found one that is typically made out of chain links and key ring rings.<br/>
I couldn't find anyone had designed on to print so thought I would give it a crack. Quite pleased it worked first iteration.<br/>
It is quite strong as the rings are printed in a long cross section.<... | [
"fidget",
"thingiverse"
] | Toys & Games > Outdoor Toys | [
"119225/images/image_1_compressed.jpg",
"119225/images/image_2_compressed.jpg"
] | [
"119225/stls/Chain_Fidget.stl"
] | CC-BY | https://www.printables.com/model/119225 | data_0042.tar |
1370802 | Chain with PTF tube support | <p>On my Creality Hi the PTFE guide tube get entangled with the Spool Holder, and I lost some 24 hours prints because the filament got torn and the printer keeps printing without filament (I really do not know why), so I decide to create this link which in tandem with the bell for Creality Hi (https://www.printables.co... | [
"creality",
"cablechain",
"crealityhi"
] | 3D Printers > Creality Parts & Upgrades | [
"1370802/images/image_1_compressed.jpg",
"1370802/images/image_10_compressed.jpg",
"1370802/images/image_11_compressed.jpg",
"1370802/images/image_12_compressed.jpg",
"1370802/images/image_13_compressed.jpg",
"1370802/images/image_14_compressed.jpg",
"1370802/images/image_2_compressed.jpg",
"1370802/i... | [
"1370802/stls/EnlaceConSoporteTubo.stl",
"1370802/stls/EnlaceConSoporteTubo_BL.stl"
] | CC-BY | https://www.printables.com/model/1370802 | data_0042.tar |
177143 | Chainmail 3D Printed Fabric ( snap together too) | <p>This is a Chainmail/3D printed fabric design that can be printed interlocking or snap together. saw some of the other designs that were really cool but I couldn't figure out how to going them so I leveraged another design I had to make a fabric with snap together pieces.</p><p>My plan was to make a T-shirt with this... | [
"fabric",
"chainmail",
"mail",
"chain",
"armour",
"printinplace",
"snap",
"shirt",
"tshirt",
"cosplayarmour",
"snaptogeher",
"maille",
"chainmaille"
] | Fashion > Other Fashion Accessories | [
"177143/images/image_1_compressed.jpg",
"177143/images/image_2_compressed.jpg",
"177143/images/image_3_compressed.jpg",
"177143/images/image_4_compressed.jpg",
"177143/images/image_5_compressed.jpg",
"177143/images/image_6_compressed.jpg",
"177143/images/image_7_compressed.jpg",
"177143/images/image_8... | [
"177143/stls/Fabric 12.stl",
"177143/stls/Fabric Single.stl",
"177143/stls/Fabric16Strip.stl",
"177143/stls/Fabric32.stl",
"177143/stls/Fabricsheet.stl"
] | CC-BY | https://www.printables.com/model/177143 | data_0042.tar |
1498010 | Chainmail Cup Coaster – Stylish 3D Printed Table Accessory | <p>Add a touch of medieval flair to your table with this chainmail-inspired cup coaster! The flexible interlocking design protects your surfaces from hot mugs and glasses while looking absolutely unique. Perfect for fantasy fans or anyone who loves creative home accessories.</p><p> </p><p><strong>Features:</strong... | [
"kitchen",
"display",
"table",
"bottle",
"coasters",
"decoration",
"cup",
"dragon",
"tool",
"dog",
"desk",
"fabric",
"print",
"chainmail",
"space",
"d",
"door",
"minimal",
"decor",
"design",
"art",
"diy",
"mail",
"chain",
"armour",
"armor",
"fantasy",
"dnd",
"... | Household > Home Decor | [
"1498010/images/image_1_compressed.jpg",
"1498010/images/image_2_compressed.jpg",
"1498010/images/image_3_compressed.jpg",
"1498010/images/image_4_compressed.jpg",
"1498010/images/image_5_compressed.jpg",
"1498010/images/image_6_compressed.jpg",
"1498010/images/image_7_compressed.jpg"
] | [
"1498010/stls/Chainmail-01.stl"
] | CC-BY | https://www.printables.com/model/1498010 | data_0042.tar |
1142990 | Chair for Dummy 13 | <p>A comfy maybe bit cursed chair<br>Print it with whatever you like, i printed it myself with PLA.<br><br>You need to resize the model to 60% in order to fit to the normal size of the Dummy 13. <br>You can also of course change the size as you like. <br><br><br>Meshmixer didnt like me with this model i made,... | [
"dummy13",
"dummy13accessory",
"dummy13prop"
] | Tabletop Miniatures > Props & Terrains | [
"1142990/images/image_1_compressed.jpg",
"1142990/images/image_2_compressed.jpg",
"1142990/images/image_3_compressed.jpg",
"1142990/images/image_4_compressed.jpg",
"1142990/images/image_5_compressed.jpg",
"1142990/images/image_6_compressed.jpg"
] | [
"1142990/stls/Dummy comfy chair (updated).stl",
"1142990/stls/Dummy comfy chair.stl"
] | CC-BY | https://www.printables.com/model/1142990 | data_0042.tar |
926596 | Chair Stop 60mm and 50mm for Simracing | <p>2025-04-13: Added Version for 50mm wheels. Gap between the wheels is still 20mm</p><p> </p><p>The Chair stopper stops your office chair from rolling away. I specially designed thi to use my office chair for simracing.</p><p>The Stopper fits 60mm diameter wheels. The Gap between the wheels is 20mm.</p><p>Glue a ... | [
"wheel",
"chair",
"stopper",
"simracing",
"officechair",
"60mm",
"thingiverse",
"chairs"
] | Household > Office | [
"926596/images/image_1_compressed.jpg",
"926596/images/image_2_compressed.jpg",
"926596/images/image_3_compressed.jpg",
"926596/images/image_4_compressed.jpg",
"926596/images/image_5_compressed.jpg",
"926596/images/image_6_compressed.jpg",
"926596/images/image_7_compressed.jpg"
] | [
"926596/stls/Office Chair stop 50mm.stl",
"926596/stls/Office Chair stop 60mm.stl"
] | CC-BY | https://www.printables.com/model/926596 | data_0042.tar |
1136652 | Challenge Coin Holders | <p>There are 5 separate models included, each adding an additional row for more coins to be held. Each row can hold roughly 5-8 coins (depending on size). </p><p>I printed using PLA+, using 5% infill as the models can get fairly large. </p> | [
"office",
"holder",
"coin",
"challenge",
"military",
"lawenforcement",
"cop"
] | Household > Office | [
"1136652/images/image_1_compressed.jpg"
] | [
"1136652/stls/1 Tier Coin Holder.stl",
"1136652/stls/2 Tier Coin Holder.stl",
"1136652/stls/3 Tier Coin Holder.stl",
"1136652/stls/4 Tier Coin Holder.stl",
"1136652/stls/5 Tier Coin Holder.stl"
] | CC-BY | https://www.printables.com/model/1136652 | data_0042.tar |
147365 | Challenge your 3d-Printer - All in one printer test | <p>With this test you can test the following properties of your print settings:</p><ul><li>Tolerances</li><li>Stringing</li><li>Overhangs</li><li>Contures</li><li>Text</li><li>Bridging</li><li>and some more</li></ul> | [
"printer",
"test",
"calibration",
"tolerance",
"challenge",
"calibrationtest",
"tolerancetest",
"stringingtest"
] | 3D Printers > Test Models | [
"147365/images/image_1_compressed.jpg",
"147365/images/image_2_compressed.jpg",
"147365/images/image_3_compressed.jpg"
] | [
"147365/stls/ChallengeYour3dPrinter v5.stl"
] | CC-BY | https://www.printables.com/model/147365 | data_0042.tar |
378603 | chameleon dual color | <p>i made a two color model of the original model in blender.</p> | [
"multicolor",
"dual"
] | Art & Design > Sculptures | [
"378603/images/image_1_compressed.jpg"
] | [
"378603/stls/chameleon_1.stl",
"378603/stls/chameleon_2.stl"
] | CC0 | https://www.printables.com/model/378603 | data_0042.tar |
297443 | Chapstick / Lip Balm Cap | <p>My girlfriend had several used lip balms that either had missing caps or loose cracked caps so I decided to revive them with some 3D printed replacement caps!</p><p>The model is quite basic, just a hollowed cylinder with some fillets. This lip balm format has a ridge on the balm cartridge itself, which is how it kee... | [
"cap",
"chapstick",
"lip",
"lipbalm",
"balm",
"burtsbees"
] | Hobby & Makers > Other Ideas | [
"297443/images/image_1_compressed.jpg",
"297443/images/image_2_compressed.jpg"
] | [
"297443/stls/burts bees cap.stl",
"297443/stls/lip balm cap.stl"
] | CC0 | https://www.printables.com/model/297443 | data_0042.tar |
318327 | Charging Cable Organizer | <p>Made to hold several charging cables for computers, phones, etc. I used a command strip to mount to the side of my desk.</p> | [
"charger",
"phone",
"ipad",
"iphone",
"cablemanagement",
"macbook",
"cableholder",
"officeorganization",
"chargingcable"
] | Hobby & Makers > Organizers | [
"318327/images/image_1_compressed.jpg",
"318327/images/image_2_compressed.jpg"
] | [
"318327/stls/Charging Cord Holder v1.stl"
] | CC0 | https://www.printables.com/model/318327 | data_0042.tar |
390972 | Cheated Dice | <p>Hi!</p>
<p>If you have the Balanced Dice (<a href="https://www.thingiverse.com/thing:147883">http://www.thingiverse.com/thing:147883</a>), you may need this set of dices.</p>
<p>It's a hollow dice with a solid semisphere in one of the inner faces making it unbalanced.</p>
<p>Sightly increases the probabilities to ob... | [
"game",
"dice",
"thingiverse",
"cheat"
] | Toys & Games > Board Games | [
"390972/images/image_1_compressed.jpg",
"390972/images/image_2_compressed.jpg",
"390972/images/image_3_compressed.jpg",
"390972/images/image_4_compressed.jpg",
"390972/images/image_5_compressed.jpg",
"390972/images/image_6_compressed.jpg",
"390972/images/image_7_compressed.jpg",
"390972/images/image_8... | [
"390972/stls/cheated_1.stl",
"390972/stls/cheated_2.stl",
"390972/stls/cheated_3.stl",
"390972/stls/cheated_4.stl",
"390972/stls/cheated_5.stl",
"390972/stls/cheated_6.stl"
] | CC-BY | https://www.printables.com/model/390972 | data_0042.tar |
88718 | Checklist (print in place version) | <p>Print in place checklist. The OpenSCAD code can easily be changed for customized list, just adjust size and spacing. This is based on https://www.thingiverse.com/thing:2068177.</p> | [
"openscad",
"todolist",
"checklist"
] | Hobby & Makers > Organizers | [
"88718/images/image_1_compressed.jpg"
] | [
"88718/stls/todo.fancy.litterbox.10.stl",
"88718/stls/todo.fancy.roomclean.10.stl",
"88718/stls/todo.months.10.stl",
"88718/stls/todo.regular.10.stl",
"88718/stls/todo.regular.roomclean.10.stl"
] | CC-BY | https://www.printables.com/model/88718 | data_0042.tar |
579894 | Cheese Coaster | A drink coaster modeled after a slice of Swiss cheese | Download free 3D printable STL models | [
"coaster",
"cheese",
"coastersdrink"
] | Household > Home Decor | [
"579894/images/image_1_compressed.jpg"
] | [
"579894/stls/Cheese.stl"
] | CC-BY | https://www.printables.com/model/579894 | data_0042.tar |
1163800 | CHEESE! | <p>Cheese Cheese Cheese</p> | [
"food",
"cheese"
] | Tabletop Miniatures > Props & Terrains | [
"1163800/images/image_1_compressed.jpg",
"1163800/images/image_2_compressed.jpg"
] | [
"1163800/stls/cheese.stl"
] | CC0 | https://www.printables.com/model/1163800 | data_0042.tar |
349382 | Cheesy Holiday Mechanism | <figure class="image image-style-align-center"><img src="https://media.printables.com/media/prints/349382/rich_content/a16c8165-3235-48e2-8af5-291a4ed366fa/7ca9e48c-aa76-4680-b23b-905f342812e8.gif#%7B%22uuid%22%3A%2257b74612-0eac-4083-a95e-2081817b2e55%22%2C%22w%22%3A480%2C%22h%22%3A476%7D"></figure><p><img></p><p>Just... | [
"gears",
"christmastree",
"carousel",
"holidays",
"santaclaus",
"gingerbread",
"holidayornament",
"planetarygears"
] | Seasonal designs > Winter & Christmas & New Year's | [
"349382/images/image_1_compressed.jpg",
"349382/images/image_10_compressed.jpg",
"349382/images/image_11_compressed.jpg",
"349382/images/image_12_compressed.jpg",
"349382/images/image_13_compressed.jpg",
"349382/images/image_14_compressed.jpg",
"349382/images/image_15_compressed.jpg",
"349382/images/i... | [
"349382/stls/Base Carrier.stl",
"349382/stls/Bell.stl",
"349382/stls/Bell_No support enforcers.stl",
"349382/stls/Bevel Cap.stl",
"349382/stls/Bevel-Spur Gear.stl",
"349382/stls/Cam Track.stl",
"349382/stls/Cane.stl",
"349382/stls/Cane_No support enforcers.stl",
"349382/stls/CHM_BROWN_SET.stl",
"3... | CC-BY | https://www.printables.com/model/349382 | data_0042.tar |
528287 | Chemistry Lab Bench | A small laboratory with scale, glassware, and pipettes. | Download free 3D printable STL models | [
"chemistrymodel"
] | Learning > Chemistry & Biology | [
"528287/images/image_1_compressed.jpg"
] | [
"528287/stls/Lab Bench V2.stl",
"528287/stls/Lab Bench.stl"
] | GPL2.0 | https://www.printables.com/model/528287 | data_0042.tar |
184861 | Chess Board - 4 Section | <p>This is a remix of Chess Board thing by TwistedDaylight. I liked the design and I thought it could be easier to print and would be more substantial.</p>
<p>I had a few issues with getting it all to fit. I had to resize the yellow tiles so they would fit in the board sections. Then after printing two part 1's and the... | [
"thingiverse"
] | Toys & Games > Board Games | [
"184861/images/image_1_compressed.jpg",
"184861/images/image_2_compressed.jpg",
"184861/images/image_3_compressed.jpg",
"184861/images/image_4_compressed.jpg",
"184861/images/image_5_compressed.jpg"
] | [
"184861/stls/CB_Board_1.stl",
"184861/stls/CB_Board_2.stl",
"184861/stls/CB_Board_2_-_Cut_Copy.stl",
"184861/stls/CB_Board_3_x32.stl"
] | CC-BY | https://www.printables.com/model/184861 | data_0042.tar |
1249713 | Chess figure | [
"magnet",
"chess",
"mat",
"sachy",
"sach"
] | Toys & Games > Board Games | [
"1249713/images/image_1_compressed.jpg"
] | [
"1249713/stls/kůň.stl",
"1249713/stls/pinčlík .stl",
"1249713/stls/věž.stl"
] | CC-BY | https://www.printables.com/model/1249713 | data_0042.tar | |
190950 | chess pawn | <p>print at 60% infill </p> | [] | Toys & Games > Board Games | [
"190950/images/image_1_compressed.jpg"
] | [
"190950/stls/Pawn v3.stl"
] | CC0 | https://www.printables.com/model/190950 | data_0042.tar |
8328 | Chewbacca BobbleHead TPU spring | <p>Hello, I did a bit remixed version of Chewbacca. I used spring from regular pen and it wasn't that good. So why shouldn't print some spring for it to make it even cooler right?</p>
<p>I used:<br/>
Polymaker PolyWood (for body)<br/>
Fillamentum Vertigo Grey (for base)<br/>
Fillamentum Flexfill 92A "Signal Red" (fo... | [
"starwars",
"chewbacca",
"tpu",
"fillamentum",
"hypercube",
"thingiverse",
"bobblehead",
"polymaker",
"polywood"
] | Toys & Games > Action Figures & Statues | [
"8328/images/image_1_compressed.jpg",
"8328/images/image_2_compressed.jpg",
"8328/images/image_3_compressed.jpg",
"8328/images/image_4_compressed.jpg",
"8328/images/image_5_compressed.jpg",
"8328/images/image_6_compressed.jpg",
"8328/images/image_7_compressed.jpg"
] | [
"8328/stls/base.stl",
"8328/stls/chewbacca_tpu_bobblehead.stl",
"8328/stls/chewie_body.stl",
"8328/stls/chewie_head.stl"
] | CC-BY | https://www.printables.com/model/8328 | data_0042.tar |
160388 | Chicago Cubs Logo - Coaster | <p>Chicago Cubs Logo</p>
<p>Created as seperate parts to easily do a multi-color print.</p>
Category: Sport & Outdoors | [
"logo",
"thingiverse",
"chicago",
"chicagocubs",
"cubs"
] | Sports & Outdoor > Other Sports | [
"160388/images/image_1_compressed.jpg",
"160388/images/image_2_compressed.jpg",
"160388/images/image_3_compressed.jpg",
"160388/images/image_4_compressed.jpg",
"160388/images/image_5_compressed.jpg"
] | [
"160388/stls/CubsLogo.stl",
"160388/stls/Cubs_Logo2.stl",
"160388/stls/Cubs_Logo3.stl"
] | CC-BY | https://www.printables.com/model/160388 | data_0042.tar |
215597 | Chick feeder small | [
"small",
"feeder",
"chick",
"chicken",
"threaded"
] | Household > Pets | [
"215597/images/image_1_compressed.jpg",
"215597/images/image_2_compressed.jpg"
] | [
"215597/stls/krmitko v.1 miska.stl",
"215597/stls/krmitko v.1 nadoba.stl",
"215597/stls/krmitko v.1 viko.stl"
] | CC-BY | https://www.printables.com/model/215597 | data_0042.tar | |
52563 | Chick Fil A Vent Sauce Holder | <p>Remixed Icepick Designs version to be wider and longer to hold the chick fil a sauces, everything else is the same.</p>
<h3>Print instructions</h3><p>supports only needed in the clip</p> | [
"holder",
"vent",
"chickfila",
"sauce"
] | Gadgets > Other Gadgets | [
"52563/images/image_1_compressed.jpg"
] | [
"52563/stls/chickfiladipping-sauce-holder.stl"
] | CC-BY | https://www.printables.com/model/52563 | data_0042.tar |
831312 | Chick, quail water dispenser | <p>Hi !</p><p>Freshly hatched chicks and quails require a small, practical drinker until they are a few days old. Quail can drown in even a small bowl of water. Drinking it for a few days is a good solution. All you need is a stronger pet bottle that won't collapse.</p><p>It does not require support.</p> | [
"bottle",
"water",
"pet",
"feeder",
"watering",
"diy",
"chick",
"chicken",
"dispenser",
"feed",
"quail"
] | Household > Pets | [
"831312/images/image_1_compressed.jpg",
"831312/images/image_2_compressed.jpg",
"831312/images/image_3_compressed.jpg",
"831312/images/image_4_compressed.jpg"
] | [
"831312/stls/chick.stl"
] | CC-BY | https://www.printables.com/model/831312 | data_0042.tar |
1202723 | Chicken Feeder (Prints Flat) | <p>The body prints flat, then gently fold the corners and press into the side pieces. I find it easiest to start at one of the bottom corners and work my way to the top. You can hang it with string from the little holes. </p><p>I use a small ‘ice scoop’ to pour new feed into the top slot. </p> | [
"feeder",
"baby",
"food",
"chick",
"chicken",
"trough"
] | Household > Pets | [
"1202723/images/image_1_compressed.jpg",
"1202723/images/image_2_compressed.jpg"
] | [
"1202723/stls/EndCap_v1.stl",
"1202723/stls/FeederBody_v1.stl"
] | CC0 | https://www.printables.com/model/1202723 | data_0042.tar |
314244 | Chicken leg ring | <p>Ring diameter 18mm.<br>Průměr kroužku 18mm.<br> </p><p>Blank ring or with numbers 0-9.<br>Čistý kroužek nebo s čísly 0-9.<br> </p><p>Print from weather-resistant material.<br>Tiskněte z materiálu odolného venkovnímu prostředí.<br> </p><p>Print setting:<br>Nastavení tisku:</p><p>Prusaslicer “0.20mm QUA... | [
"ring",
"chicken",
"krouzek",
"hen",
"slepice"
] | Household > Pets | [
"314244/images/image_1_compressed.jpg"
] | [
"314244/stls/All-in-one.stl",
"314244/stls/Blank.stl",
"314244/stls/No.0.stl",
"314244/stls/No.1.stl",
"314244/stls/No.2.stl",
"314244/stls/No.3.stl",
"314244/stls/No.4.stl",
"314244/stls/No.5.stl",
"314244/stls/No.6.stl",
"314244/stls/No.7.stl",
"314244/stls/No.8.stl",
"314244/stls/No.9.stl"
... | CC-BY | https://www.printables.com/model/314244 | data_0042.tar |
202474 | Chicken/Rooster Keychain | <p>Simple chicken key chain I made for my mom who raises chickens.</p><p>One with key loop another one without in case someone wanted just the chicken design.</p><p>Very easy and quick print no support, no brim, 20% infill, standard quality using cura </p> | [] | Art & Design > 2D Plates & Logos | [
"202474/images/image_1_compressed.jpg"
] | [
"202474/stls/Chicken Keychain v2.stl",
"202474/stls/Chicken.stl"
] | CC-BY | https://www.printables.com/model/202474 | data_0042.tar |
76860 | Chihuahua |
<p>Key ring with Chihuahua theme</p>
Category: Pets
| [
"dog",
"keychain",
"thingiverse",
"chihuahua"
] | Household > Pets | [
"76860/images/image_1_compressed.jpg",
"76860/images/image_2_compressed.jpg",
"76860/images/image_3_compressed.jpg",
"76860/images/image_4_compressed.jpg",
"76860/images/image_5_compressed.jpg"
] | [
"76860/stls/civava.stl"
] | CC-BY | https://www.printables.com/model/76860 | data_0042.tar |
113523 | Child seat belt clasp | <p>This clasp will hold the belt pieces of a child seat together so that the toddler can't wriggle their arms out.<br>The model has been designed to not need supports. Its bulky design makes it perfectly fine to print at e.g. 0.28 mm layer height.</p> | [
"car",
"seat",
"belt",
"clasp",
"child"
] | Hobby & Makers > Automotive | [
"113523/images/image_1_compressed.jpg"
] | [
"113523/stls/Childseat belt stop.stl"
] | CC-BY | https://www.printables.com/model/113523 | data_0042.tar |
433444 | Children Reading Helper | <p>The helper tool blocks all text around and only exposes the current sentence. That helps childer concentrate just on the text they actually read, and don't bother with other texts.</p><p>The model has an opening width of 6mm, which may fit well with 12pt letters, and also have shallow hols for fingers to be easy to ... | [
"tool",
"reading",
"ruler",
"helper",
"childern"
] | Gadgets > Other Gadgets | [
"433444/images/image_1_compressed.jpg"
] | [
"433444/stls/read_ruler.stl"
] | CC-BY | https://www.printables.com/model/433444 | data_0042.tar |
1260808 | Chimpanzini Bananini | <p>Chimpanzini Bananini! wa wa wa! Bananuchi monkey monkey monkey uchi! or Chimpanzini Cocosini? wa wa wa! po po batabim. Coconuchi monkey monkey monkey yuchi! or Chimpanzini Ananasini? wa wa wa!</p> | [
"meme",
"italian",
"brainrot",
"italianbrainrot"
] | Toys & Games > Action Figures & Statues | [
"1260808/images/image_1_compressed.jpg",
"1260808/images/image_2_compressed.jpg"
] | [
"1260808/stls/Chimpanzini Bananini.stl"
] | CC-BY | https://www.printables.com/model/1260808 | data_0042.tar |
126465 | Chinese New Year Fu Wall Decoration | <p>The Chinese character Fu stands for good luck, good fortune, and blessing. Sometimes it also means happiness. It is most popularly used during the Chinese New Year celebrations, hung upside down on the entrances of many Chinese homes.</p><p>Hung this way, the character Fu literally means “good luck arrives” because ... | [
"chinese",
"chinesenewyear",
"lunarnewyear"
] | Art & Design > 2D Plates & Logos | [
"126465/images/image_1_compressed.jpg"
] | [
"126465/stls/CNYDecor-Fu.stl"
] | CC-BY | https://www.printables.com/model/126465 | data_0042.tar |
22076 | chip - kľúč na nákupné košíky - klíč na nákupní košíky | <p>Prívesok na kľúče umožňuje odomknúť nákupný košík. Zmenou polohy prívesku posunutím vpravo alebo vľavo je možné prívesok z košíku vytiahnuť.</p>
<p>Je vytvorený podľa rozmeru 2€ mince.<br/>
Mal by fungovať aj v Českej republike no nemám to overené.</p>
<p>Vrstva tlače 0,2mm<br/>
Triska 0,4mm<br/>
Výplň 100%</p>
<h3>... | [] | Hobby & Makers > Tools | [
"22076/images/image_1_compressed.jpg",
"22076/images/image_2_compressed.jpg"
] | [
"22076/stls/kluc-na-kosiky.stl"
] | CC0 | https://www.printables.com/model/22076 | data_0042.tar |
951509 | Chip Clip 9000 Pro Max | <p>The original Chip Clip 9000 was great, and seen as revolutionary by so many people. But what is more revolutionary, than that? I'll tell you what! The Chip Clip 9000 Pro Max, that's what!</p><p>It's the same exact Chip Clip 9000, but slightly bigger! and a longer name!</p><p>Revolutionary!</p> | [
"clip",
"chips",
"chip"
] | Household > Kitchen | [
"951509/images/image_1_compressed.jpg"
] | [
"951509/stls/Chip Clip 9000 Pro Max.stl"
] | CC-BY | https://www.printables.com/model/951509 | data_0042.tar |
158788 | Chip Tray for Mini Lathe - S3D Remix | <p>I was having a bit of trouble slicing the chip tray STL by <a href="/the-real-aga/">the-real-aga</a>, so I did a quick redraw in Fusion360 using his mesh as a template.</p>
<p>I've left the mounting holes at 5mm and added a little room for adjustment, though they might need enlarging slightly if your lathe has M6 ho... | [
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"158788/images/image_1_compressed.jpg",
"158788/images/image_2_compressed.jpg"
] | [
"158788/stls/MinilatheChipTray.stl"
] | CC-BY | https://www.printables.com/model/158788 | data_0042.tar |
858606 | Chipolo ONE Clip | <p>BOM:</p><p>M3 x 6mm screw - x 1</p> | [
"clip",
"clips",
"tracker",
"trackers",
"chipolo"
] | Gadgets > Other Gadgets | [
"858606/images/image_1_compressed.jpg"
] | [
"858606/stls/Chipolo Clip.stl"
] | CC0 | https://www.printables.com/model/858606 | data_0042.tar |
539393 | chips bag clip | <h3><strong>TL;DR</strong></h3><p>Reduced to the max clip to “close” chips bags.</p><h3>update</h3><ul><li>added 5, 10, 15 and 20 mm thickness for stronger wife approved ones.</li><li>The parameter thickness did that if you like to make other sizes.</li><li>The 20 mm version is best.</li><li><a href="https://www.printa... | [] | Household > Living Room | [
"539393/images/image_1_compressed.jpg",
"539393/images/image_10_compressed.jpg",
"539393/images/image_11_compressed.jpg",
"539393/images/image_2_compressed.jpg",
"539393/images/image_3_compressed.jpg",
"539393/images/image_4_compressed.jpg",
"539393/images/image_5_compressed.jpg",
"539393/images/image... | [
"539393/stls/clip-clip 10mm.stl",
"539393/stls/clip-clip 15mm.stl",
"539393/stls/clip-clip 20mm.stl",
"539393/stls/clip-clip 5mm.stl",
"539393/stls/clip-clip.stl",
"539393/stls/clips-clips.stl"
] | GPL3.0 | https://www.printables.com/model/539393 | data_0042.tar |
74028 | Chlor Pool Floater/Dispenser | <p>Hi hier habe ich für den Pool ein einfachen Chlor Behälter mit Fusion360 gezeichnet.</p><p>Lässt sich mit dem Prusa MK3s ganz ohne Support drucken. </p><p>Ich habe eine Version mit 0.15 Layerhöhe gedruckt da passt der Deckel ganz gut.</p><p>Falls ihr mit 0.3 Layerhöhe druckt müsst ihr vielleicht noch etwas absc... | [
"pool",
"intex",
"dispenser",
"floater",
"chlorine",
"chlorinedispenser",
"chlorinator",
"intexpool",
"chrlor",
"chlor",
"poolchlor"
] | Seasonal designs > Summer | [
"74028/images/image_1_compressed.jpg",
"74028/images/image_2_compressed.jpg",
"74028/images/image_3_compressed.jpg",
"74028/images/image_4_compressed.jpg",
"74028/images/image_5_compressed.jpg"
] | [
"74028/stls/Chlorbombe v8.stl",
"74028/stls/Chlorbombe-v8-deckel.stl"
] | CC-BY | https://www.printables.com/model/74028 | data_0042.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.