model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
211616 | Coffee Bean Stencil | <h4>Description</h4><p>Multiple sized coffee stencils sized for a 12fl oz mug and 6fl oz</p><p> </p> | [
"mug",
"coffee",
"stencil",
"bean"
] | Household > Kitchen | [
"211616/images/image_1_compressed.jpg"
] | [
"211616/stls/Coffee Bean Stencil - All 3 Sizes.stl",
"211616/stls/Coffee Stencil - Large.stl",
"211616/stls/Coffee Stencil - Medium.stl",
"211616/stls/Coffee Stencil - Small.stl",
"211616/stls/Coffee Stencil Small - Small.stl"
] | CC0 | https://www.printables.com/model/211616 | data_0042.tar |
212122 | Coffee Caddy for Cups, Lids, Sleeves, and Stirs | <p>An organizer for my cluttered shelf, finally putting all my to-go coffee essentials in one convenient caddy.</p><p>See how I made it here: </p><figure class="media"><oembed url="https://youtu.be/Yb0LAfMbSEI"></oembed></figure><p>Print Settings:</p><p>Designed to spring 100% solid, the walls are 1.2mm (a few cor... | [] | Household > Kitchen | [
"212122/images/image_1_compressed.jpg"
] | [
"212122/stls/Coffee Caddy.stl"
] | CC-BY | https://www.printables.com/model/212122 | data_0042.tar |
33757 | Coffee Cup Coaster | <p>A drinks coaster. Two sizes, 100 mm for normal cups/mugs and 125 mm for larger mugs.<br/>
I've included the .gcode from the Prusa version of Slic3r with the colour changes.</p>
<h3>Print instructions</h3><h3>Category: Kitchen & Dining Summary</h3>
<p>A drinks coaster. Two sizes, 100 mm for normal cups/mugs and ... | [
"cup",
"coaster",
"mug",
"coffee",
"thingiverse"
] | Household > Kitchen | [
"33757/images/image_1_compressed.jpg",
"33757/images/image_2_compressed.jpg",
"33757/images/image_3_compressed.jpg",
"33757/images/image_4_compressed.jpg"
] | [
"33757/stls/coffeecoaster_100mm.stl",
"33757/stls/coffeecoaster_125mm.stl"
] | CC-BY | https://www.printables.com/model/33757 | data_0042.tar |
373025 | Coffee Filter Stand | <p>A paper coffee filter stand / holder for countertop or cupboard. Fits Melitta No 2 single cup pour over filters or similar sized filters. </p> | [
"coffee"
] | Household > Kitchen | [
"373025/images/image_1_compressed.jpg",
"373025/images/image_2_compressed.jpg"
] | [
"373025/stls/Coffee-Filter-Stand.stl"
] | CC0 | https://www.printables.com/model/373025 | data_0042.tar |
228174 | Coffee Grinder Tray Specialita | <p>This is a coffee grinder tray for the Eureka Mignon Specialita coffee grinder.</p><p>I made this remix to have a bigger tray with this dimensions:</p><p>width: 120mm (as usual)</p><p>Two different versions: 120mm and 135mm</p><p>height: 20mm</p><p>Can be printed without problems in PLA without support.</p><p>I recom... | [
"tray",
"thingiverse",
"coffeegrinder",
"mignon",
"eureka",
"eurekamignon",
"specialita",
"magnifico"
] | Household > Kitchen | [
"228174/images/image_1_compressed.jpg",
"228174/images/image_2_compressed.jpg"
] | [
"228174/stls/Eureka-Magnifico-V1.stl",
"228174/stls/GrinderTray.stl",
"228174/stls/GrinderTray135mm.stl"
] | CC-BY | https://www.printables.com/model/228174 | data_0042.tar |
310543 | Coffee/Nespresso capsule organiser. | <p>You can mount this print under a cabinet with double sided tape or mount it vertically against your wall. When its mounted just <i>slide your capsules onto the <strong>“railes”</strong></i></p><p> </p><p><i><strong>Print Settings</strong></i></p><ul><li><i>Material: Pla</i></li><li><i>Layer height: 0.30mm</i></... | [
"organiser",
"coffee",
"coffeecapsuleholder",
"nesspresso",
"coffeecapsules"
] | Household > Kitchen | [
"310543/images/image_1_compressed.jpg",
"310543/images/image_2_compressed.jpg"
] | [
"310543/stls/CoffeeCapsuleHolder.stl"
] | CC-BY | https://www.printables.com/model/310543 | data_0042.tar |
540004 | Coffin Crystal Holder | <p>My wife wanted to have a new way that matches her aesthetic to show off some of her crystals. Being the good husband I am I made her this. Each shelf has a little lip so nothing falls out. It is pretty big so I had to scale it down to 97% and split it into 2 parts to fit in my Ankermake M5. When I was making it I me... | [
"shelf",
"crystal",
"shelves",
"coffin",
"organizers"
] | Hobby & Makers > Organizers | [
"540004/images/image_1_compressed.jpg"
] | [
"540004/stls/Bottom Coffin UPDATED.stl",
"540004/stls/Coffin Body 1.stl",
"540004/stls/Coffin Body 2.stl",
"540004/stls/Top Coffin UPDATED.stl",
"540004/stls/Whole Coffin UPDATED.stl",
"540004/stls/Whole Coffin.stl"
] | CC-BY | https://www.printables.com/model/540004 | data_0042.tar |
447636 | coffre | <p>Un petit coffre fonctionnel et décoratif pour ranger de petits objets.</p><p>Un modèle de coffre 90x50x40 simple et un modèle 90x50x40 texturé</p><p>Les modèles peuvent être ajustés aux dimensions et textures voulues avec le fichier openscad.</p> | [
"coffre",
"boitederangement",
"coffret"
] | Tabletop Miniatures > Miniature Gaming Accessories | [
"447636/images/image_1_compressed.jpg",
"447636/images/image_2_compressed.jpg",
"447636/images/image_3_compressed.jpg",
"447636/images/image_4_compressed.jpg"
] | [
"447636/stls/coffre tex90-50-40.stl",
"447636/stls/coffre90-50-40.stl",
"447636/stls/couvercle tex90-50-40.stl",
"447636/stls/couvercle90-50-40.stl"
] | CC-BY | https://www.printables.com/model/447636 | data_0042.tar |
1350012 | coiled snake | <p>print in pla or petg with tree supports</p><p> </p> | [] | World & Scans > Animals | [
"1350012/images/image_1_compressed.jpg"
] | [
"1350012/stls/snake.stl"
] | CC-BY | https://www.printables.com/model/1350012 | data_0042.tar |
587066 | Coin - Super Mario Bros | <p>Hey there! My son asked me to make him a coin from Super Mario Bros. After poking around, I couldn't find a model that fit the proportions I thought that it should have, mainly from how they look in the SNES games. This was designed in SW2021 (native, step, and STL files attached) and is naturally 5" diameter x 1" t... | [
"coin",
"mario",
"bros",
"super"
] | Costumes & Accessories > Props | [
"587066/images/image_1_compressed.jpg"
] | [
"587066/stls/Coin_5x1_23Apr2023-STL.stl"
] | CC0 | https://www.printables.com/model/587066 | data_0042.tar |
529216 | Coin and token card for shopping cart | <p>Coin and token card for shopping cart with credit card size.</p> | [
"card",
"shoppingcartcoin",
"trolleytoken",
"trolleycoins"
] | Gadgets > Other Gadgets | [
"529216/images/image_1_compressed.jpg",
"529216/images/image_2_compressed.jpg",
"529216/images/image_3_compressed.jpg",
"529216/images/image_4_compressed.jpg",
"529216/images/image_5_compressed.jpg",
"529216/images/image_6_compressed.jpg",
"529216/images/image_7_compressed.jpg"
] | [
"529216/stls/kreditka mince.stl"
] | CC0 | https://www.printables.com/model/529216 | data_0042.tar |
51225 | Coin Boxes for 5 Cent, 10 Cent, 20 Cent and 50 Cent | [
"box",
"money",
"euro",
"cent"
] | Hobby & Makers > Organizers | [
"51225/images/image_1_compressed.jpg"
] | [
"51225/stls/coin-box-10-cent-body.stl",
"51225/stls/coin-box-10-cent-lid.stl",
"51225/stls/coin-box-20-cent-body.stl",
"51225/stls/coin-box-20-cent-lid.stl",
"51225/stls/coin-box-5-cent-body.stl",
"51225/stls/coin-box-5-cent-lid.stl",
"51225/stls/coin-box-50-cent-body.stl",
"51225/stls/coin-box-50-cen... | CC-BY | https://www.printables.com/model/51225 | data_0042.tar | |
370231 | Coin Puzzle Box | <p>This is a remix of the puzzle box by Scorch.<br>The box was designed for a nickel and as it is very hard to find one in Europe, I've remodeled it to fit an Euro.</p><p>I've redesigned the holes and gaps, as it was a little too wobbly.</p><p>You need</p><p>1x <a href="https://bit.ly/3F3V3jc">M4x25mm screw</a></p><p>1... | [
"box",
"puzzle",
"coin",
"party",
"euro",
"3dpuzzle",
"maze",
"puzzlebox",
"puzzles",
"cubepuzzle"
] | Toys & Games > Puzzles & Brain-teasers | [
"370231/images/image_1_compressed.jpg",
"370231/images/image_2_compressed.jpg",
"370231/images/image_3_compressed.jpg",
"370231/images/image_4_compressed.jpg",
"370231/images/image_5_compressed.jpg"
] | [
"370231/stls/Bottom.stl",
"370231/stls/Middle.stl",
"370231/stls/Top.stl"
] | CC0 | https://www.printables.com/model/370231 | data_0042.tar |
317053 | Coin Wallet - Drawer Style | <p>This little drawer is my solution to the Ultracompact Wallet issue. It will hold a bunch of coins (or any other small object).</p><h5>Features</h5><ul><li>retaining feature that keeps the drawer from falling out in public</li><li>protruding handle to easily open with one hand</li><li>satisfying click when closing an... | [
"coins",
"wallet",
"3dprintedwallet"
] | Fashion > Other Fashion Accessories | [
"317053/images/image_1_compressed.jpg",
"317053/images/image_2_compressed.jpg"
] | [
"317053/stls/case.stl",
"317053/stls/drawer.stl"
] | CC0 | https://www.printables.com/model/317053 | data_0042.tar |
1623729 | Collapsible TPU Bottle | 600 ml | <p><strong>Collapsible Bottle | Compact & Lightweight 🏕</strong></p><p>This 3D printed collapsible bottle is designed for outdoor use — great for hiking, camping, or tossing in your daypack.<br>It folds down to less than a third of its full height, making it ultra space-efficient when empty, and expands to hold up... | [] | Sports & Outdoor > Outdoor Sports | [
"1623729/images/image_1_compressed.jpg",
"1623729/images/image_2_compressed.jpg"
] | [
"1623729/stls/bottle.stl",
"1623729/stls/cap.stl",
"1623729/stls/cap_hook.stl"
] | CC0 | https://www.printables.com/model/1623729 | data_0042.tar |
169286 | Collar Stays | <p>I recommend using scaling in prusaslicer to match the needed size of your dress shirt if the provided size doesn't quite work.</p><p> </p><p>Ironing can be used to give a smooth surface if desired.</p> | [
"collar",
"stay",
"shirt",
"dressshirt",
"collarstay",
"stays"
] | Fashion > Men | [
"169286/images/image_1_compressed.jpg",
"169286/images/image_2_compressed.jpg",
"169286/images/image_3_compressed.jpg"
] | [
"169286/stls/Collar_Stay_Hollow.stl",
"169286/stls/Collar_Stay_Solid.stl"
] | CC-BY | https://www.printables.com/model/169286 | data_0042.tar |
283176 | Collar Stays for Dress Shirt | [
"collar"
] | Fashion > Other Fashion Accessories | [
"283176/images/image_1_compressed.jpg"
] | [
"283176/stls/Collar Stay.stl"
] | CC0 | https://www.printables.com/model/283176 | data_0042.tar | |
1600333 | Combat Initiation Jason/Slasher Articulated Roblox Figure | <p>Print in PETG with TREE supports for results better than your outcome playing against this player.</p><p>Hes so kikimama.</p> | [
"jason",
"forsaken",
"articulated",
"roblox",
"robloxfigure",
"robloxforsaken",
"combatititiation"
] | Toys & Games > Action Figures & Statues | [
"1600333/images/image_1_compressed.jpg",
"1600333/images/image_2_compressed.jpg",
"1600333/images/image_3_compressed.jpg",
"1600333/images/image_4_compressed.jpg"
] | [
"1600333/stls/CI Slasher-Jason.stl"
] | CC-BY | https://www.printables.com/model/1600333 | data_0042.tar |
275454 | combination lock container keychain | [] | Hobby & Makers > Tools | [
"275454/images/image_1_compressed.jpg",
"275454/images/image_2_compressed.jpg",
"275454/images/image_3_compressed.jpg"
] | [
"275454/stls/combination lock container keychain.stl"
] | CC0 | https://www.printables.com/model/275454 | data_0042.tar | |
241321 | Command Strip mount for Honeycomb wall | <p>Use alongside Insert-Empty.</p><p>Mount is a little bit longer to allow the storage to protrude from the wall although I may make a shorter version at some point.</p><p>printed using PLA</p> | [
"storage",
"honeycomb"
] | Hobby & Makers > Organizers | [
"241321/images/image_1_compressed.jpg",
"241321/images/image_2_compressed.jpg"
] | [
"241321/stls/command strip mount v1.stl"
] | CC0 | https://www.printables.com/model/241321 | data_0042.tar |
1524804 | Commodore 64 Ultimate Starlight Edition Keyboard Brace Flex Fix | <p>New version 2. Based off feedback I have increased the thickness by 1.5mm which makes it a better fit to the keyboard of the Starlight greatly reducing flex. Thanks to user <strong>Strudster</strong> for the feedback and image.</p><p></p><p>This is a keyboard brace for the flexible keyboard in the Starlight ver... | [
"commodore",
"ultimate",
"c64",
"64",
"starlight",
"c64ultimate"
] | Gadgets > Video Games | [
"1524804/images/image_1_compressed.jpg",
"1524804/images/image_2_compressed.jpg",
"1524804/images/image_3_compressed.jpg",
"1524804/images/image_4_compressed.jpg"
] | [
"1524804/stls/Left Half Brace.stl",
"1524804/stls/Right Half Brace.stl",
"1524804/stls/Single Brace.stl"
] | CC0 | https://www.printables.com/model/1524804 | data_0042.tar |
1424857 | Compact Scraper - Scraper bed | <p><strong>Print settings</strong></p><p>Orientation - flat on the bed</p><p>Layer height - 0.2 mm (or finer if you want cleaner edges)</p><p>Infill - 20–30%</p><p>Supports - not required</p><p>Material - PLA or PETG (PETG is more durable)</p><p><strong>My settings</strong></p><p>Printer - Creality Ender 3 V3</p><p>Lay... | [
"tool",
"bed",
"scraper",
"tools",
"scratcher",
"bedscraper",
"scrapertool",
"scraperbed"
] | 3D Printers > Accessories | [
"1424857/images/image_1_compressed.jpg",
"1424857/images/image_2_compressed.jpg",
"1424857/images/image_3_compressed.jpg",
"1424857/images/image_4_compressed.jpg",
"1424857/images/image_5_compressed.jpg"
] | [
"1424857/stls/big scraper.stl",
"1424857/stls/small scraper.stl"
] | CC-BY | https://www.printables.com/model/1424857 | data_0042.tar |
577396 | Compact Travel Hook | <p>This travel hook is a perfect show of Physics, gravity and 3d printing! It utilizes the print in place ability of 3d printers and is able to withstand the heavy loads of shopping. It is also extremely compact and is easy to fold up. It can be used on any restaurant table that is not too thick and is useful if ... | [
"holder",
"hook",
"bag",
"hanger"
] | 3D Printers > Accessories | [
"577396/images/image_1_compressed.jpg",
"577396/images/image_2_compressed.jpg",
"577396/images/image_3_compressed.jpg",
"577396/images/image_4_compressed.jpg",
"577396/images/image_5_compressed.jpg",
"577396/images/image_6_compressed.jpg",
"577396/images/image_7_compressed.jpg"
] | [
"577396/stls/Compact Travel Hook Honeycomb.stl",
"577396/stls/Compact Travel Hook.stl"
] | CC-BY | https://www.printables.com/model/577396 | data_0042.tar |
1085576 | Companion Cube Keycap | <p>Companion Cube Keycap</p><p><br>The model should fit any standard cherry MX style switch.<br><br>Included are both STL files compatible with your favorite slicer, as well as STEP files if you wish to personalize the model.<br>If you wish to provide feedback/improvements to the model please join our public <a href="h... | [
"portal",
"valve",
"keycap",
"keyboard",
"mx",
"cherry",
"cherrymx",
"portal2",
"cherrymxkeycap"
] | Art & Design > Other Art & Designs | [
"1085576/images/image_1_compressed.jpg",
"1085576/images/image_2_compressed.jpg",
"1085576/images/image_3_compressed.jpg"
] | [
"1085576/stls/Companion_Keycap.stl"
] | CC-BY | https://www.printables.com/model/1085576 | data_0042.tar |
1078642 | compass keychain | [
"compass",
"compasses",
"compas"
] | Sports & Outdoor > Outdoor Sports | [
"1078642/images/image_1_compressed.jpg"
] | [
"1078642/stls/compass_keychain.stl"
] | CC-BY | https://www.printables.com/model/1078642 | data_0042.tar | |
951675 | Component/small parts box holder for Multiboard | <p>A simple component/parts box holder for your Multiboard.</p><p>You also need 2 multiboard large bolts to screw it into a multihole.</p><p>In the pictures i used 13mm bolts with a push-fit head. 9mm would probably work as well.</p><p> </p><p>There are two versions:</p><ol><li>Default shelf which has the same sid... | [
"box",
"storage",
"componentbox",
"boxes",
"componentsbox",
"screwbox",
"multiboard",
"multiboardremix"
] | Hobby & Makers > Organizers | [
"951675/images/image_1_compressed.jpg",
"951675/images/image_2_compressed.jpg"
] | [
"951675/stls/multiboard-box-holder-default-shelf-reinforced.stl",
"951675/stls/multiboard-box-holder-default-shelf.stl",
"951675/stls/multiboard-box-holder-large-shelf-reinforced.stl",
"951675/stls/multiboard-box-holder-large-shelf.stl"
] | CC-BY | https://www.printables.com/model/951675 | data_0042.tar |
373542 | Compound Bow Wall Mount (Three versions) | <p>This model is a remix that adds a couple features. Three version are available. One with a deer silhouette, original, and deer silhouette with peg for holding your bow release. The hanger will hold over 25lbs. </p><p>Happy printing </p> | [
"wallhanger",
"hunting",
"compoundbow"
] | Sports & Outdoor > Outdoor Sports | [
"373542/images/image_1_compressed.jpg",
"373542/images/image_2_compressed.jpg",
"373542/images/image_3_compressed.jpg",
"373542/images/image_4_compressed.jpg",
"373542/images/image_5_compressed.jpg"
] | [
"373542/stls/Compound Bow wall mount w_release_Holder.stl",
"373542/stls/Compound bow wall mount.stl",
"373542/stls/Compound_bow_wall_mount.stl"
] | CC-BY | https://www.printables.com/model/373542 | data_0042.tar |
257644 | Computer Floor Stand | <p>A wider version of the stand <a href="https://www.printables.com/model/107322-computer-floor-stand">made by SubSide</a>. Due to the increase in width and decrease in height, I couldn't keep the same central arch as the original. I added some tree-like arches, to make it less boring and use less material.</p><p>The m... | [
"case",
"stand",
"computer",
"pc",
"computeraccessories",
"computerstand"
] | Household > Office | [
"257644/images/image_1_compressed.jpg",
"257644/images/image_2_compressed.jpg",
"257644/images/image_3_compressed.jpg",
"257644/images/image_4_compressed.jpg"
] | [
"257644/stls/computer_stand_v3.stl"
] | CC-BY | https://www.printables.com/model/257644 | data_0042.tar |
112959 | Computer Model | [
"computer",
"scalemodel"
] | Toys & Games > Other Toys & Games | [
"112959/images/image_1_compressed.jpg",
"112959/images/image_2_compressed.jpg"
] | [
"112959/stls/ComputerModel.stl"
] | CC0 | https://www.printables.com/model/112959 | data_0042.tar | |
873690 | Computer Space Replica Arcade - Full size cabinet | <p>This is a hand modelled 3D sculpt for a full sized replica of the very first Arcade machine - Computer Space from 1971 (A year before Pong).</p><p>The original cabinet was moulded from fibreglass and wood.</p><p>Designed and launched in 1971 by Nolan Bushnell and Ted Dabney, manufactured by Nutting associates.... | [
"replica",
"arcade",
"cabinet",
"historic"
] | Gadgets > Video Games | [
"873690/images/image_1_compressed.jpg",
"873690/images/image_10_compressed.jpg",
"873690/images/image_11_compressed.jpg",
"873690/images/image_12_compressed.jpg",
"873690/images/image_13_compressed.jpg",
"873690/images/image_14_compressed.jpg",
"873690/images/image_15_compressed.jpg",
"873690/images/i... | [
"873690/stls/A10_C_Space_MM_V3_Section_A10.stl",
"873690/stls/A1_C_Space_MM_V3_Section_A1.stl",
"873690/stls/A2_C_Space_MM_V3_Section_A2.stl",
"873690/stls/A3_C_Space_MM_V3_Section_A3.stl",
"873690/stls/A4_C_Space_MM_V3_Section_A4.stl",
"873690/stls/A5_C_Space_MM_V3_Section_A5.stl",
"873690/stls/A6_C_Sp... | CC-BY | https://www.printables.com/model/873690 | data_0042.tar |
838214 | Computer Stand for Dell Dock | <p>Computer Stand designed to be attached to the Dell Dock and save space on your desk.</p><p>There are Three Versions:</p><ul><li><strong>Single Material Version</strong></li><li><strong>Multi Material Version:</strong> with interlocked pads designed to be printed in flexible materials</li><li><strong>Multi Colour Ver... | [
"multimaterial",
"stand",
"computer",
"dock",
"dell",
"computeraccessories",
"computerstand"
] | Gadgets > Computers | [
"838214/images/image_1_compressed.jpg",
"838214/images/image_2_compressed.jpg",
"838214/images/image_3_compressed.jpg"
] | [
"838214/stls/bracket_base_for_grips.stl",
"838214/stls/bracket_grip_MMU.stl",
"838214/stls/bracket_MultiMAterial.stl",
"838214/stls/bracket_nogrip.stl",
"838214/stls/bracket_nogrip_v2.stl",
"838214/stls/grips.stl"
] | CC-BY | https://www.printables.com/model/838214 | data_0042.tar |
69856 | Condom Case 3 PCS | <p>This is a compact box that holds and protects up to 3 condoms so you can safely carry them with you in your bag. <br><br>The 2mm thick structural sides and edges of the box make sure the contents cant get squished, the front and back have 1mm thick sections to make sure nothing can puncture the contents wh... | [
"box",
"case",
"container",
"protective",
"condom",
"protectivecase",
"ritex"
] | Hobby & Makers > Organizers | [
"69856/images/image_1_compressed.jpg"
] | [
"69856/stls/Ritex XXL condom holder v7_Ritex XXL condom holder v7_body_Ritex XXL condom holder v7.stl",
"69856/stls/Ritex XXL condom holder v7_Ritex XXL condom holder v7_cap_Ritex XXL condom holder v7.stl"
] | GPL3.0 | https://www.printables.com/model/69856 | data_0042.tar |
879183 | Condom Storage Unit | <p>Simple condom storage box that can handle up to 40 pieces. Or you can use the box for anything else. Eight 5x2mm disc magnets used.</p><p>The front and back hexagonal notches can accommodate a sticker or heart model (use red filament and stick it on).</p><p> </p> | [
"box",
"organiser",
"magnet",
"storage",
"condom",
"condomcase"
] | Household > Bedroom | [
"879183/images/image_1_compressed.jpg",
"879183/images/image_2_compressed.jpg"
] | [
"879183/stls/CondomBox_base.stl",
"879183/stls/CondomBox_base_empty.stl",
"879183/stls/CondomBox_cover.stl",
"879183/stls/CondomBox_heart.stl"
] | BSD | https://www.printables.com/model/879183 | data_0042.tar |
245642 | Configurable battery holder (AA, AAA, CR2032, LR44) | <p>A configurable battery holder which can either be created as a single piece or as multiple pieces that fit in each other as a puzzle.</p><p>To configure use <a href="https://openscad.org/downloads.html">OpenScad</a>, you just open the .scad file and use the customizer to generate your configuration:</p><figure class... | [
"aa",
"aaa",
"battery",
"cr2032",
"lr44",
"batteryholder",
"aabattery",
"aabatteryholder",
"aaabattery",
"aaabatteryholder",
"cr2032battery",
"cr2032batteryholder",
"lr44battery",
"lr44batteryholder"
] | Hobby & Makers > Organizers | [
"245642/images/image_1_compressed.jpg",
"245642/images/image_2_compressed.jpg",
"245642/images/image_3_compressed.jpg",
"245642/images/image_4_compressed.jpg",
"245642/images/image_5_compressed.jpg",
"245642/images/image_6_compressed.jpg"
] | [
"245642/stls/AAA_Holder_Puzzle_1x4_Bottom.stl",
"245642/stls/AAA_Holder_Puzzle_1x4_Middle.stl",
"245642/stls/AAA_Holder_Puzzle_1x4_Top.stl",
"245642/stls/AAA_Holder_Puzzle_2x2_All_Sides.stl",
"245642/stls/AAA_Holder_SinglePiece_1x1.stl",
"245642/stls/AAA_Holder_SinglePiece_2x2.stl",
"245642/stls/AAA_Hol... | CC-BY | https://www.printables.com/model/245642 | data_0042.tar |
209380 | Configurable Custom Phone Bracket with Vent Clip | <p>I designed this to replace my "one size fits all" phone holder (they never seem to work properly). This thing can be customized to fit a particular car vent louver, and a particular smartphone. Getting a new phone? Print a phone cradle to match. New car? Print a new louver and bumper. Mix and match as needed.</p><p>... | [] | Hobby & Makers > Automotive | [
"209380/images/image_1_compressed.jpg",
"209380/images/image_2_compressed.jpg",
"209380/images/image_3_compressed.jpg",
"209380/images/image_4_compressed.jpg",
"209380/images/image_5_compressed.jpg"
] | [
"209380/stls/PhoneHolder-shims.stl",
"209380/stls/PhoneHolder.stl",
"209380/stls/PhoneTwists-no-support.stl"
] | CC0 | https://www.printables.com/model/209380 | data_0042.tar |
93617 | Conjunctions SCADvent №16 | <h3><a href="http://openscad.org/advent-calendar-2021/">#SCADvent 2021</a></h3> | [
"scad",
"scadvent2021",
"scadvent"
] | Art & Design > Other Art & Designs | [
"93617/images/image_1_compressed.jpg",
"93617/images/image_2_compressed.jpg",
"93617/images/image_3_compressed.jpg",
"93617/images/image_4_compressed.jpg",
"93617/images/image_5_compressed.jpg",
"93617/images/image_6_compressed.jpg"
] | [
"93617/stls/Conjunctions.stl"
] | CC0 | https://www.printables.com/model/93617 | data_0042.tar |
528607 | Connect 4 Token | <p>I was asked to make some replacement Connect4 tokens for someone who had lost three of each colour. No problem I thought. Silly me - the real life tokens have 24 holes and 24 blips on them which enable one token to stack onto another. However, it was a good CAD exercise and although producing them requires a printer... | [
"connect4",
"thingiverse",
"puissance4"
] | Toys & Games > Other Toys & Games | [
"528607/images/image_1_compressed.jpg",
"528607/images/image_2_compressed.jpg",
"528607/images/image_3_compressed.jpg"
] | [
"528607/stls/Connect4.stl",
"528607/stls/PlainCounter.stl"
] | CC-BY | https://www.printables.com/model/528607 | data_0042.tar |
1081490 | Connect Four Game - Vier Gewinnt | <p>Experience classic fun with a modern twist! This 3D-printed Connect Four game offers a sleek, durable design perfect for game nights. Lightweight and portable, it's ideal for family gatherings or travel. Print yours today and connect more than just four!</p><p>I made this Connect Four (Vier Gewinnt) game as a learni... | [
"games",
"fidget",
"rotating",
"pieces",
"connect",
"four"
] | Toys & Games > Board Games | [
"1081490/images/image_1_compressed.jpg",
"1081490/images/image_2_compressed.jpg"
] | [
"1081490/stls/VierGewinnt_v16_Board.stl",
"1081490/stls/VierGewinnt_v16_Prototyp_2X1.stl",
"1081490/stls/VierGewinnt_v16_Spielstein.stl"
] | CC-BY | https://www.printables.com/model/1081490 | data_0042.tar |
1293059 | Connectable dragon scales | [
"dragon",
"chainmail",
"scale",
"connectable"
] | Art & Design > Other Art & Designs | [
"1293059/images/image_1_compressed.jpg"
] | [
"1293059/stls/Connectable dragon scales-5x5 2.0 (updated).stl"
] | CC0 | https://www.printables.com/model/1293059 | data_0042.tar | |
390321 | Connector & Plug for Catch-All Trays / Desk Organiser | <p>I love the <a href="https://www.printables.com/model/376225-catch-all-trays-desk-organizer">Catch-All Tray</a> design by <a href="https://www.printables.com/social/218561-hd">HD</a>, but I found the connectors and plugs too loose for my needs, so I rebuilt the connectors and plugs from scratch for a more precise fit... | [
"table",
"parametric",
"box",
"organizer",
"desk",
"container",
"modular",
"storage",
"storagebox",
"minimalist",
"tray",
"bin",
"connector",
"deskorganizer",
"catch",
"simple",
"drawerorganizer",
"containers",
"modularmount",
"configurable",
"minimalistic",
"withoutsupport... | Household > Other House Equipment | [
"390321/images/image_1_compressed.jpg",
"390321/images/image_2_compressed.jpg"
] | [
"390321/stls/Connector@0.13mm.stl",
"390321/stls/Connector@0.15mm.stl",
"390321/stls/Connector@0.1mm.stl",
"390321/stls/Plug@0.13mm.stl",
"390321/stls/Plug@0.15mm.stl",
"390321/stls/Plug@0.1mm.stl"
] | CC-BY | https://www.printables.com/model/390321 | data_0042.tar |
173629 | Connector for SKÅDIS pegboards | <p>These connectors allows you to attach 2 SKÅDIS pegboards together. This is replica of <a href="https://www.ikea.com/gb/en/p/skadis-connector-for-skadis-pegboards-white-40477646/"><strong>original part from Ikea</strong></a>. Original part is cheap and very good, but if you cannot wait for it to arrive now you can pr... | [
"pegboard",
"connector",
"skadis"
] | Hobby & Makers > Organizers | [
"173629/images/image_1_compressed.jpg",
"173629/images/image_2_compressed.jpg"
] | [
"173629/stls/Skadis connector - long.stl",
"173629/stls/Skdais connector - short.stl"
] | CC0 | https://www.printables.com/model/173629 | data_0042.tar |
257621 | Console Mixer Slider Fader Knobs Replacement for Potentiometer | <p>This is a remix of the fader knob that I met here, since the original model was not suitable for mass printing, I had to simplify it a little for better adhesion to the 3D printer table and the absence of the need to print with supports.</p>
Category: Music | [
"thingiverse",
"mixer",
"fader"
] | Hobby & Makers > Music | [
"257621/images/image_1_compressed.jpg",
"257621/images/image_2_compressed.jpg"
] | [
"257621/stls/75fbd551-f764-4afb-b70b-8523e2ec375d_257621.stl"
] | CC-BY | https://www.printables.com/model/257621 | data_0042.tar |
1216780 | Container ship benchy | <p>Just a container ship version of benchy with separately printed containers that fit in this ship</p><p>The ship can hold six containers firmly</p><p>Have fun</p> | [
"ship",
"benchy",
"cargoship",
"containers",
"containership",
"benchyremix"
] | Toys & Games > Other Toys & Games | [
"1216780/images/image_1_compressed.jpg",
"1216780/images/image_2_compressed.jpg",
"1216780/images/image_3_compressed.jpg",
"1216780/images/image_4_compressed.jpg",
"1216780/images/image_5_compressed.jpg"
] | [
"1216780/stls/3dbenchy cargo.stl",
"1216780/stls/container.stl"
] | CC-BY | https://www.printables.com/model/1216780 | data_0042.tar |
546921 | container stackable | <p>In the picture are a couple M3x8 screws for size comparison.</p><p>The container has a fillet on the inside to more easily pull out small parts.</p><p>Exact sizes of these containers are in the download section.</p> | [
"container",
"stackable"
] | Hobby & Makers > Organizers | [
"546921/images/image_1_compressed.jpg",
"546921/images/image_2_compressed.jpg"
] | [
"546921/stls/Allgemeinböxli.stl",
"546921/stls/Allgemeinböxli_grösser.stl"
] | CC-BY | https://www.printables.com/model/546921 | data_0042.tar |
868570 | Container Wagon, Green Cargo Lgjns 745/746, in H0 scale (1:87) | <p>This container wagon model is printed in parts that are glued together.</p><p>Detailed building instructions are provided in a separate PDF file.</p><p>I run several of these wagons successfully on my Märklin model railway.</p><p>The wagon in the picture was printed with a Prusa i3 MK3S+ with 0.4 mm nozzle.</p><p>Th... | [] | Hobby & Makers > Other Ideas | [
"868570/images/image_1_compressed.jpg",
"868570/images/image_2_compressed.jpg"
] | [
"868570/stls/Buffers.stl",
"868570/stls/CouplingShaft.stl",
"868570/stls/Floor.stl",
"868570/stls/Floor_X4_MMU3.stl",
"868570/stls/Frame.stl",
"868570/stls/Frame_X4_MMU3.stl",
"868570/stls/Panels_12x6.stl",
"868570/stls/Panels_9x6.stl",
"868570/stls/SmallParts.stl",
"868570/stls/Tools.stl",
"868... | CC0 | https://www.printables.com/model/868570 | data_0042.tar |
1426433 | Container with threaded lid 60mm x 28.5mm (parametric) | <p>This is a remix of <a href="https://www.printables.com/@mkosiedowski">mkosiedowski</a> Container model.</p><p>I wanted a 60mm diameter, but shorter overall height. Total height with lid attached is 28.5mm</p><p>I also did a color change version to make unique.</p><p>Printed with PLA, 0.2mm layer height, 25% infill, ... | [
"box",
"container",
"lid",
"assortment",
"jar",
"threaded"
] | Hobby & Makers > Organizers | [
"1426433/images/image_1_compressed.jpg",
"1426433/images/image_2_compressed.jpg",
"1426433/images/image_3_compressed.jpg",
"1426433/images/image_4_compressed.jpg",
"1426433/images/image_5_compressed.jpg"
] | [
"1426433/stls/Container_lid-v2_-60mmx28-5mm.stl",
"1426433/stls/Container_lid-v2_Color-Change-60mmx28-5mm.stl"
] | CC-BY | https://www.printables.com/model/1426433 | data_0042.tar |
133073 | Contax Yashica C/Y-Mount body cap | <p>This is a body cap to fit the Contax-Yashica CY-Mount. It uses the standard locking pin in the camera to latch in place, so to release you must hold down the lens release button.</p><p>Knurled edge to help in attaching/detaching from the camera. My first prototypes had a smooth circumference, and that made it very d... | [
"thingiverse",
"contax",
"yashica"
] | Gadgets > Photo & Video | [
"133073/images/image_1_compressed.jpg",
"133073/images/image_2_compressed.jpg",
"133073/images/image_3_compressed.jpg",
"133073/images/image_4_compressed.jpg"
] | [
"133073/stls/CY-Cap.stl"
] | CC-BY | https://www.printables.com/model/133073 | data_0042.tar |
1077172 | Contemporary Stand-off House Numbers & Name Board | <p>This is a remix from another design of mine, which can also be found at the following link below: <a href="https://www.printables.com/model/104691-contemporary-stand-off-house-numbers">https://www.printables.com/model/104691-contemporary-stand-off-house-numbers</a></p><p>The house numbers can be mounted on a customi... | [] | Household > Home Decor | [
"1077172/images/image_1_compressed.jpg",
"1077172/images/image_2_compressed.jpg",
"1077172/images/image_3_compressed.jpg",
"1077172/images/image_4_compressed.jpg",
"1077172/images/image_5_compressed.jpg",
"1077172/images/image_6_compressed.jpg"
] | [
"1077172/stls/House Numbers v2 - 0.stl",
"1077172/stls/House Numbers v2 - 1.stl",
"1077172/stls/House Numbers v2 - 2.stl",
"1077172/stls/House Numbers v2 - 3.stl",
"1077172/stls/House Numbers v2 - 4.stl",
"1077172/stls/House Numbers v2 - 5.stl",
"1077172/stls/House Numbers v2 - 6.stl",
"1077172/stls/H... | CC0 | https://www.printables.com/model/1077172 | data_0042.tar |
426552 | Contemporary Trophy | <p><strong>Design:</strong></p><p>This contemporary design trophy is designed in Fusion360.</p><p><strong>Print:</strong></p><p>Print is quite simple, you can either print base and top separately with different color or you can directly slice it as multi-color print. </p><p>The one from photos is printed on Prusa ... | [
"vase",
"cup",
"sport",
"award",
"trophycup",
"competition",
"contemporary",
"trophybase",
"sportstrophy"
] | Art & Design > Other Art & Designs | [
"426552/images/image_1_compressed.jpg",
"426552/images/image_2_compressed.jpg",
"426552/images/image_3_compressed.jpg",
"426552/images/image_4_compressed.jpg",
"426552/images/image_5_compressed.jpg"
] | [
"426552/stls/Trophy cup_all.stl",
"426552/stls/Trophy cup_bottom.stl",
"426552/stls/Trophy cup_top.stl"
] | GPL2.0 | https://www.printables.com/model/426552 | data_0042.tar |
35566 | Controller Stand (PS3,PS4,PS5) | <p>Controller Stand (PS3,PS4,PS5)<br/>
2 parts (Easy assembly)<br/>
Snap fit</p>
<h3>Print instructions</h3><p>Controller Stand (PS3,PS4,PS5)<br/>
2 parts (Easy assembly)<br/>
Snap fit</p> | [
"stand",
"ps4",
"ps3",
"gamecontroller",
"ps5"
] | Gadgets > Other Gadgets | [
"35566/images/image_1_compressed.jpg",
"35566/images/image_2_compressed.jpg"
] | [
"35566/stls/holder_l_v1.stl",
"35566/stls/holder_r_v1.stl"
] | CC0 | https://www.printables.com/model/35566 | data_0042.tar |
343445 | Cookie Cutter - 3D gingerbread plane | <p>After 2D and 2,5D cookies, it is time for a real 3D edible models. Model consists of 3 forms: hull, front and rear wings. As a glue you can use frosting.</p><p>Adding a little hole in the hull makes it possible to hang it on a Xmas Tree.</p><p>As a dough recipe use that which does not include baking powder, so the p... | [
"airplane",
"cookiecutter",
"gingerbread"
] | Household > Kitchen | [
"343445/images/image_1_compressed.jpg",
"343445/images/image_2_compressed.jpg"
] | [
"343445/stls/Cookie Cutter - 3D ginger plane.stl"
] | CC-BY | https://www.printables.com/model/343445 | data_0042.tar |
318933 | Cookie cutter - Gingerbread Man | <p>Cookie cutter - Gingerbread Man Simple and efficient printing</p><p><strong>Don't forget to follow </strong>my profile so you don't miss anything. It costs nothing and made me happy. Thanks in advance.</p><p><strong>Don't forget to upload a photo of your print and share.</strong><br><i><strong>Thank you very much fo... | [
"christmas",
"cookie",
"xmas",
"cookiecutter",
"holidays",
"gingerbread",
"bakingcookies"
] | Seasonal designs > Winter & Christmas & New Year's | [
"318933/images/image_1_compressed.jpg",
"318933/images/image_2_compressed.jpg",
"318933/images/image_3_compressed.jpg",
"318933/images/image_4_compressed.jpg"
] | [
"318933/stls/Gingerbread_Man_fixed.stl"
] | CC-BY | https://www.printables.com/model/318933 | data_0042.tar |
1085727 | Cookie Cutter - Loader / Excavator | <p>Cookie Cutter - Loader / Excavator</p><p>Dimensions: 75 x 65 x 13 mm</p><p>Printed from PLA</p><p> </p><p>====</p><p> </p><p>Vykrajovátko - Nakladač / Bagr</p><p>Rozměry: 75 x 65 x 13 mm</p><p>Tisknuto z PLA</p> | [
"vykrajovatko"
] | Household > Kitchen | [
"1085727/images/image_1_compressed.jpg"
] | [
"1085727/stls/nakladac_0.4n_0.2mm_PLA_MK4S.stl"
] | CC-BY | https://www.printables.com/model/1085727 | data_0042.tar |
327282 | Cookie cutter in the shape of a Christmas comet | <p>Cookie cutter in the shape of a Christmas comet</p><p>Vykrajovátko na perníčky ve tvaru Vánoční komety</p> | [
"christmas",
"baking",
"cutter",
"cookiecutter",
"christmasdecoration",
"merrychristmas",
"bakingtools",
"cookiecutters",
"gingerbread",
"gingerbreadcutter",
"vanoce",
"vanocni",
"comet",
"kometa",
"bakingcookies",
"vykrajovatko",
"gingerbead",
"pecenie",
"vykrajovatka",
"perni... | Household > Kitchen | [
"327282/images/image_1_compressed.jpg"
] | [
"327282/stls/Comet cutter.stl"
] | CC-BY | https://www.printables.com/model/327282 | data_0042.tar |
320608 | Cookie cutter in the shape of a Christmas tree | <p> Cookie cutter in the shape of a Christmas tree with a star. Christmas theme. Suitable for baking Christmas cookies.</p><p>Vykrajovátko ve tvaru Vánočního stromečku</p> | [
"cooking",
"christmas",
"star",
"cookie",
"baking",
"cookies",
"cookiecutter",
"christmasdecoration",
"christmastree",
"bakingtools",
"cookiecutters",
"gingerbread",
"gingerbreadcutter",
"vanocni",
"bakingcookies",
"vykrajovatko",
"vanocnistromek",
"gingerbead",
"vykrajovatka",
... | Household > Kitchen | [
"320608/images/image_1_compressed.jpg",
"320608/images/image_2_compressed.jpg",
"320608/images/image_3_compressed.jpg",
"320608/images/image_4_compressed.jpg"
] | [
"320608/stls/Christmass tree.stl"
] | CC-BY | https://www.printables.com/model/320608 | data_0042.tar |
336952 | Cookie Cutter Socks Form | <p>cookie cutter in socks form</p><p>height outside 15mm<br>height inside 11,5mm</p><p>2 separate files for left and right sock ;-)</p><p> </p><p>Just have a look to the other cookie cutters I create:<br><a href="https://www.printables.com/social/180133-dhiertz/collections/376620">https://www.printables.com/social... | [
"christmas",
"cookiecutter",
"weihnachten",
"keksausstecher",
"socks",
"socken"
] | Seasonal designs > Winter & Christmas & New Year's | [
"336952/images/image_1_compressed.jpg",
"336952/images/image_2_compressed.jpg",
"336952/images/image_3_compressed.jpg"
] | [
"336952/stls/cookie cutter sock1.stl",
"336952/stls/cookie cutter sock2.stl"
] | CC-BY | https://www.printables.com/model/336952 | data_0042.tar |
1083980 | Cookie Cutters - Stargate | <p>These are 3 cookie cutters I have designed. They are all Stargate themed.<br><br>You have - Atlantis<br> BC-304<br> Replicator block<br><br>So, happy printing and happy cooking ... | [
"star",
"cookiecutter",
"gate"
] | Household > Kitchen | [
"1083980/images/image_1_compressed.jpg",
"1083980/images/image_2_compressed.jpg",
"1083980/images/image_3_compressed.jpg",
"1083980/images/image_4_compressed.jpg",
"1083980/images/image_5_compressed.jpg"
] | [
"1083980/stls/xxx_-_304.stl",
"1083980/stls/xxx_-_atl.stl",
"1083980/stls/xxx_-_rep.stl"
] | CC-BY | https://www.printables.com/model/1083980 | data_0042.tar |
48669 | Cookie Cutters Mittens (2x1) | <p>We all love additive manufacturing (aka 3d printing) because it creates so little waste. But what should I say. At least there is one subtractive process where the waste can be processed further. Cookie dough + cookie cutters ;-)</p>
<p>To get the details when baking you need a dough that doesn't run much and is rol... | [
"christmas",
"cookie",
"baking",
"cookies",
"fusion360",
"xmas",
"cookiecutter",
"autodeskfusion360",
"autodeskfusion",
"bakingtools"
] | Seasonal designs > Winter & Christmas & New Year's | [
"48669/images/image_1_compressed.jpg"
] | [
"48669/stls/cookiecuttersmittens_2x1high.stl",
"48669/stls/cookiecuttersmittens_2x1low.stl"
] | CC-BY | https://www.printables.com/model/48669 | data_0042.tar |
395409 | Cool! | <p>Cool is part of the Good Words Collection. With so much bad news surrounding us, I'm just trying to get to share positive messages. These are easy to print 3D typographic decorations. The make simple and thoughtful gifts. Share with friends, family and surprise strangers. Spread good words.</p><p>Along with Cool, do... | [
"design",
"hot",
"cool",
"style",
"words"
] | Art & Design > Other Art & Designs | [
"395409/images/image_1_compressed.jpg",
"395409/images/image_2_compressed.jpg",
"395409/images/image_3_compressed.jpg",
"395409/images/image_4_compressed.jpg",
"395409/images/image_5_compressed.jpg",
"395409/images/image_6_compressed.jpg"
] | [
"395409/stls/CoolC.stl",
"395409/stls/CoolD.stl"
] | CC0 | https://www.printables.com/model/395409 | data_0042.tar |
152815 | Copanko Spool holder 2KG adapter | <p>Made a simple adapter so it would fit the 2KG spools from Prusa. It is detachable to keep the original design of the spool holder when not using 2KG spools.</p> | [
"spoolholder",
"adapter",
"prusamini"
] | 3D Printers > Other Printer Parts & Upgrades | [
"152815/images/image_1_compressed.jpg",
"152815/images/image_2_compressed.jpg"
] | [
"152815/stls/Extention.stl"
] | GPL3.0 | https://www.printables.com/model/152815 | data_0042.tar |
941733 | Coraline Button Key | <p>Made the Coraline button and button key for a family member, I haven't printed it yet and probably won't. </p><p>Hope anyone who liked the movie enjoys this.</p> | [
"key",
"button",
"coraline"
] | Costumes & Accessories > Props | [
"941733/images/image_1_compressed.jpg",
"941733/images/image_2_compressed.jpg",
"941733/images/image_3_compressed.jpg"
] | [
"941733/stls/Coraline Button - Half.stl",
"941733/stls/Coraline Button.stl",
"941733/stls/Coraline Key.stl"
] | CC0 | https://www.printables.com/model/941733 | data_0042.tar |
1275152 | Cord winder | <p>printed in place. with abs or asa. </p><p>Bambulab x1</p> | [
"winder"
] | Sports & Outdoor > Outdoor Sports | [
"1275152/images/image_1_compressed.jpg",
"1275152/images/image_2_compressed.jpg",
"1275152/images/image_3_compressed.jpg"
] | [
"1275152/stls/cord winder ver 0.7.stl"
] | CC0 | https://www.printables.com/model/1275152 | data_0042.tar |
1356367 | Core One Belt Pick | <p>I was having trouble getting repeatable frequency readings strumming with my fingers so decided to print a pick which helps get more repeatable numbers. The pick in the photo was printed with ASA but would probably work with PLA or PETG.</p> | [
"prusaxl",
"coreone"
] | Hobby & Makers > Tools | [
"1356367/images/image_1_compressed.jpg"
] | [
"1356367/stls/Belt Pick.stl"
] | CC0 | https://www.printables.com/model/1356367 | data_0042.tar |
1385480 | Core One Belt tensioner pulley with heat-set threaded insert, added clearance | <p>The original model by Chris Hill worked great! The only issue I had was properly seating the heat-set inserts through the valley due to the size of the tip I have for my soldering iron. This model adds clearance for proper installation of the insert.</p><p>I printed this in PA6-CF since I had it on-hand. As stated i... | [
"coreone",
"coreoneupgrade"
] | 3D Printers > Prusa Parts & Upgrades | [
"1385480/images/image_1_compressed.jpg"
] | [
"1385480/stls/tensioner_pulley_heatset_clearance.stl"
] | GPL2.0 | https://www.printables.com/model/1385480 | data_0042.tar |
1548269 | CORE One Door Magnet Holder Improved | <p>I modified the original magnet holder to improve door closure. The stock 1.9mm wall was too thick, often resulting in a weak magnetic hold—especially if your door has warped slightly from printing high-temp materials like ASA or PC. This version reduces the wall thickness to 1mm and shifts the pocket 0.4mm closer to... | [
"coreone",
"coreonemod",
"coreoneplus"
] | 3D Printers > Prusa Parts & Upgrades | [
"1548269/images/image_1_compressed.jpg",
"1548269/images/image_2_compressed.jpg",
"1548269/images/image_3_compressed.jpg",
"1548269/images/image_4_compressed.jpg",
"1548269/images/image_5_compressed.jpg"
] | [] | GPL2.0 | https://www.printables.com/model/1548269 | data_0042.tar |
1388903 | Core One Electronics Cover with Fan (No MMU Required) | <p>This cover replaces the metal one on the front of the xBuddy box and provides extra forced air cooling and ventilation, especially in the vicinity of the stepper drivers. It has optional colour text which can either be glued in or printed with an MMU.</p><p>Provided are versions with and without the 40mm fan mount.<... | [
"case",
"cover",
"fan",
"xbuddy",
"coreone"
] | 3D Printers > Prusa Parts & Upgrades | [
"1388903/images/image_1_compressed.jpg",
"1388903/images/image_2_compressed.jpg",
"1388903/images/image_3_compressed.jpg",
"1388903/images/image_4_compressed.jpg",
"1388903/images/image_5_compressed.jpg"
] | [
"1388903/stls/Fanless xBuddy Cover.stl",
"1388903/stls/Lower xBuddy Cover MMU.stl",
"1388903/stls/Lower xBuddy Cover.stl",
"1388903/stls/PSU Cover (Lightguide) MMU.stl",
"1388903/stls/PSU Cover (Lightguide).stl",
"1388903/stls/PSU Cover (Plain) MMU.stl",
"1388903/stls/PSU Cover (Plain).stl",
"1388903/... | CC-BY | https://www.printables.com/model/1388903 | data_0042.tar |
1434367 | Core One Filter Adapter for Tesla Model 3 / Filter | <p>This isn’t a remix of the original design but an add-on piece. I printed the Tesla Model 3 / Y exhaust fan filter housing part from <a href="https://www.printables.com/model/1393822-core-one-filter-adapter-for-tesla-model-3y-hepa-ac/comments">this model</a>, but the plastic rivets on my Core One prevented it from mo... | [
"filter",
"adapter",
"tesla"
] | 3D Printers > Prusa Parts & Upgrades | [
"1434367/images/image_1_compressed.jpg"
] | [
"1434367/stls/Core One Tesla Filter Mounting Plate.stl"
] | GPL2.0 | https://www.printables.com/model/1434367 | data_0042.tar |
1173664 | CORE One Fish (With Color Texture) | <p>Jealous that all the CORE One reviewers got a cool fish with their machine? Now you can print your own!</p><p>3MF file includes negative volumes to fit two 10x2 mm magnets: <a href="https://geni.us/HIiDH">https://geni.us/HIiDH</a> (affiliate)</p><p>Buy the genuine fish: <a href="https://www.prusa3d.com/de/produkt/so... | [] | 3D Printers > Accessories | [
"1173664/images/image_1_compressed.jpg",
"1173664/images/image_2_compressed.jpg"
] | [
"1173664/stls/COREOne_fish.stl",
"1173664/stls/COREOne_fish_color.stl"
] | CC0 | https://www.printables.com/model/1173664 | data_0042.tar |
1357129 | CORE One left side Gridfinity tray | <p>5x2 Gridfinity tray that'll sit nicely in the left recess of the CORE One. For stashing tools, nozzles, sheets, Haribo bears or anything else you want.<br><br>Either print as one piece, or use the separate base and tray to reduce the need for support and allow for two different colours. </p><p>It's a tight fit ... | [
"gridfinity",
"coreone"
] | 3D Printers > Prusa Parts & Upgrades | [
"1357129/images/image_1_compressed.jpg",
"1357129/images/image_2_compressed.jpg"
] | [
"1357129/stls/CORE One Left Gridfinity Base.stl",
"1357129/stls/CORE One Left Gridfinity Complete.stl",
"1357129/stls/CORE One Left Gridfinity Tray.stl"
] | CC-BY | https://www.printables.com/model/1357129 | data_0042.tar |
1374729 | CORE One nozzle wiper | [
"coreone"
] | 3D Printers > Prusa Parts & Upgrades | [
"1374729/images/image_1_compressed.jpg"
] | [
"1374729/stls/nozzle_wiper.stl"
] | GPL3.0 | https://www.printables.com/model/1374729 | data_0042.tar | |
1601435 | Core One small hex plug | <p>The photo is wrong. These openings should be in the back of the printer.</p> | [] | 3D Printers > Prusa Parts & Upgrades | [
"1601435/images/image_1_compressed.jpg"
] | [
"1601435/stls/small-plug.stl"
] | CC0 | https://www.printables.com/model/1601435 | data_0042.tar |
1452391 | Core One spool adapter | <p>spool adapter vor Core One without screwing, no suport </p> | [
"spool",
"adapter",
"one",
"core",
"geetech",
"jayo"
] | 3D Printers > Prusa Parts & Upgrades | [
"1452391/images/image_1_compressed.jpg",
"1452391/images/image_2_compressed.jpg",
"1452391/images/image_3_compressed.jpg",
"1452391/images/image_4_compressed.jpg",
"1452391/images/image_5_compressed.jpg",
"1452391/images/image_6_compressed.jpg"
] | [
"1452391/stls/Spulen Adabter.stl"
] | CC-BY | https://www.printables.com/model/1452391 | data_0042.tar |
1472572 | CORE One Vent Handle/Slider | <p><strong>CORE One vent handle makes it easier to open and close the vent.</strong> Works as a slider and handle. </p><p><strong>Matches the aesthetics</strong> of the CORE One.</p><p><strong>Use the M3x10rT screws and nuts.</strong> The middle screw can be left, as there is a groove that still allows it to sit f... | [
"handle",
"lid",
"slider",
"vent",
"coreone",
"coreonelid"
] | 3D Printers > Prusa Parts & Upgrades | [
"1472572/images/image_1_compressed.jpg",
"1472572/images/image_2_compressed.jpg",
"1472572/images/image_3_compressed.jpg",
"1472572/images/image_4_compressed.jpg"
] | [
"1472572/stls/CoreOneLidHandle.stl"
] | CC-BY | https://www.printables.com/model/1472572 | data_0042.tar |
1513344 | CoreOne Corner Bumper | <p>I started to see that when loading the build plate sometime I hit the corner of the storage box corners so in order to protect them I designed these bumpers. </p><p>I designed them as slim as possible for 8x1.6 mm magnets and I also made use of the small holes in the corner for mechanical lock as well to keep t... | [
"protection",
"bumper",
"cornerprotector",
"protectioncover",
"coreone",
"coreonemod",
"coreoneupgrade"
] | 3D Printers > Prusa Parts & Upgrades | [
"1513344/images/image_1_compressed.jpg",
"1513344/images/image_2_compressed.jpg",
"1513344/images/image_3_compressed.jpg",
"1513344/images/image_4_compressed.jpg",
"1513344/images/image_5_compressed.jpg"
] | [
"1513344/stls/CoreOne-Corner-Bumper.stl"
] | CC0 | https://www.printables.com/model/1513344 | data_0042.tar |
1278527 | CoreOne Nozzle Replacement Tool (sock) Skadis holder | <p>I made a handy Skadis holder for the CoreOne Nozzle Replacement Tool (sock). </p> | [
"tool",
"replacement",
"nozzle",
"skadis",
"coreone"
] | Hobby & Makers > Organizers | [
"1278527/images/image_1_compressed.jpg",
"1278527/images/image_2_compressed.jpg"
] | [
"1278527/stls/Skadis CoreOne Nozzle (with sock) change aid holder.stl"
] | GPL2.0 | https://www.printables.com/model/1278527 | data_0042.tar |
356390 | Corner 20x20 coupling | Corner coupling | Download free 3D printable STL models | [
"corners"
] | 3D Printers > Accessories | [
"356390/images/image_1_compressed.jpg",
"356390/images/image_2_compressed.jpg"
] | [
"356390/stls/Corner 20x20 with center.stl",
"356390/stls/Corner 20x20.stl"
] | CC0 | https://www.printables.com/model/356390 | data_0042.tar |
1098027 | Corner Bracket for V-Slot 2020 | <p>Corner bracket for for V-Slot aluminum extrusion profile.</p><ul><li><p>Print with no supports.</p></li><li><p>Easy to mount and service.</p></li><li><p>Tested with PETG and PLA.</p></li><li><p>Uses about 1.0-1.2m of filament - perfect project to finish your near empty rolls :)</p></li><li><p>Adding two of them on b... | [
"2020",
"cornerbracket",
"vslot",
"vslot2020",
"vslotbracket"
] | Hobby & Makers > Mechanical Parts | [
"1098027/images/image_1_compressed.jpg",
"1098027/images/image_2_compressed.jpg"
] | [
"1098027/stls/V-Slot 2020 90 Degree Corner Bracket V1.stl",
"1098027/stls/V-Slot 2020 90 Degree Corner Bracket V2 (20x20mm).stl",
"1098027/stls/V-Slot 2020 90 Degree Corner Bracket V2 (40x40mm).stl"
] | CC-BY | https://www.printables.com/model/1098027 | data_0042.tar |
36990 | Corner clamps | <p>I needed to clamp some corners while the glue is drying and started designing ones that can be used with one normal g-clamp.</p> | [
"thingiverse",
"clamps",
"cornerclamps"
] | Hobby & Makers > Tools | [
"36990/images/image_1_compressed.jpg",
"36990/images/image_2_compressed.jpg"
] | [
"36990/stls/corner_clamps.stl"
] | CC-BY | https://www.printables.com/model/36990 | data_0042.tar |
114570 | Corner Mount Valve Index Base Station / HTC Vive LightHouse | <p>This corner mount is designed to be small and easy to print as no support is required.</p><p>You will need two 4mm screws to anchor the mount to the wall. The Valve Index base station will attach to the mount with the original screws.</p><p><br><strong>WARNING</strong> heat up the OEM screw if the hole feels too tig... | [
"htcvive",
"valveindex"
] | Gadgets > Virtual Reality | [
"114570/images/image_1_compressed.jpg",
"114570/images/image_2_compressed.jpg",
"114570/images/image_3_compressed.jpg"
] | [
"114570/stls/Valve Index Base Station Corner Mount.stl"
] | CC0 | https://www.printables.com/model/114570 | data_0042.tar |
264278 | Corner reinforcement for corrugated cardboard box |
<p>I made a zero cost draft screen for my printer !. Used corrugated cardboard boxes lying around.</p>
<p>Printed in PETG with 10% infill. One print is a set of 4 brackets</p>
<p>Please like and return you comments.</p>
Category: DIY
| [
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"264278/images/image_1_compressed.jpg",
"264278/images/image_2_compressed.jpg",
"264278/images/image_3_compressed.jpg",
"264278/images/image_4_compressed.jpg",
"264278/images/image_5_compressed.jpg",
"264278/images/image_6_compressed.jpg",
"264278/images/image_7_compressed.jpg",
"264278/images/image_8... | [
"264278/stls/061210_Hoekje_Omkasting_karton_4x_V2.stl"
] | CC-BY | https://www.printables.com/model/264278 | data_0042.tar |
161036 | Corner Support Bracket Angle |
<p>Corner bracket</p>
Category: Tools
| [
"support",
"bracket",
"angle",
"corner",
"thingiverse",
"cornerbracket"
] | Hobby & Makers > Tools | [
"161036/images/image_1_compressed.jpg"
] | [
"161036/stls/Corner_Support_small_v1.stl"
] | CC-BY | https://www.printables.com/model/161036 | data_0042.tar |
465498 | Corsori Food Dehydrator (CFD-N051-W) Modification to Filament Dryer | <p><strong>This is a design for modifying a COSORI 11.62" Food Dehydrator CFD-N051-W; 350W--will NOT fit the Cosori CFD165FD 13.8" 450W model! </strong>. The shell allows drying two spools of filament at a time. I used Polymaker Transparent PETg. On the Prusa MK3S I used .3mm layers mode. On the Bambu X1 I used .24mm l... | [
"food",
"dehydrator",
"cosori"
] | 3D Printers > Accessories | [
"465498/images/image_1_compressed.jpg",
"465498/images/image_2_compressed.jpg",
"465498/images/image_3_compressed.jpg",
"465498/images/image_4_compressed.jpg"
] | [
"465498/stls/cosori-1of3.30mm.petg.stl"
] | CC-BY | https://www.printables.com/model/465498 | data_0042.tar |
1062910 | Corvette Emblem | <p>This multicolor print is modeled after the physical emblem found on the 2000 corvette.<br><br>I have included multiple pre-sliced configuration for multicolor printers as well as STL's pre-scaled to fit any print bed.</p><p>If opening the STL to your slicer, split the model to parts to be able to assign filament col... | [
"logo",
"multicolor",
"design",
"car",
"motors",
"emblem",
"ornament",
"sports",
"general",
"corvette",
"chevy",
"vehicle",
"hood",
"mmu3",
"prusaxl",
"brand",
"chevrolet",
"sportscar",
"gm",
"bambulab"
] | Art & Design > Wall-mounted | [
"1062910/images/image_1_compressed.jpg",
"1062910/images/image_2_compressed.jpg",
"1062910/images/image_3_compressed.jpg"
] | [
"1062910/stls/2000 Corvette Emblem - 180mm x 180mm.stl",
"1062910/stls/2000 Corvette Emblem - 225mm x 200mm.stl",
"1062910/stls/2000 Corvette Emblem - 360mm x 360mm.stl",
"1062910/stls/Corvette 2000 Emblem - Bambu Lab A1 Mini.stl",
"1062910/stls/Corvette 2000 Emblem - Bambu Lab X1C.stl",
"1062910/stls/Cor... | CC0 | https://www.printables.com/model/1062910 | data_0042.tar |
1410598 | Cosmere RPG - Stormlight Token Holder | <p>The Stormlight Archive token pack comes with a significant number of tokens, and putting them in a bag seemed disorganised to me.</p><p>I have designed a holder to help organise and protect the tokens when not in use.</p><p>The lid is held in place using 4 3x6mm magnets.</p><p> </p><p>Note: The version I have p... | [] | Tabletop Miniatures > Miniature Gaming Accessories | [
"1410598/images/image_1_compressed.jpg",
"1410598/images/image_2_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/1410598 | data_0042.tar |
21631 | Cosplay Gem Collection | <h3>Cosplay Gems and Jewels Collections</h3>
<p>Proto-Pasta "Blood of My Enemies" dark translucent ruby red.</p>
<h3>Print instructions</h3><p>Unassociated tags: blood of my enemies, blood red, cosplay gems, cosplay jewels, costume jewels</p>
<h3>Category: Costume Print Settings</h3>
<p><strong>Printer Brand:</strong> ... | [
"cosplay",
"protopasta",
"stop",
"thingiverse",
"jewels",
"gems",
"amiedd",
"gemstone",
"gemstones",
"ruby"
] | Art & Design > Other Art & Designs | [
"21631/images/image_1_compressed.jpg",
"21631/images/image_2_compressed.jpg",
"21631/images/image_3_compressed.jpg",
"21631/images/image_4_compressed.jpg",
"21631/images/image_5_compressed.jpg"
] | [
"21631/stls/galaxy_brooch_gem.stl",
"21631/stls/galaxy_brooch_gem_21631.stl",
"21631/stls/north_star.stl",
"21631/stls/north_star_21631.stl",
"21631/stls/powerful_leelo.stl",
"21631/stls/ruby_in_the_rough.stl",
"21631/stls/star_bright.stl",
"21631/stls/star_bright_21631.stl"
] | CC-BY | https://www.printables.com/model/21631 | data_0042.tar |
116498 | Cotton Round Holder 1-9-22 | <p>Just a place to store cotton rounds to wipe build plate with alcohol. Rounds are usually found in makeup section or online. Measured at 56mm Diameter. I designed on fusion 360.</p> | [
"holder",
"wipe",
"alcohol"
] | 3D Printers > Accessories | [
"116498/images/image_1_compressed.jpg",
"116498/images/image_2_compressed.jpg"
] | [
"116498/stls/wipe holder.stl"
] | CC0 | https://www.printables.com/model/116498 | data_0042.tar |
222765 | Couch armrest table (+remote/phone holder) for IKEA LANDSKRONA or other couches | <p>Holds any plate/cup/bowl or other object on the table. Objects <25 mm thick can be stored in the side compartment. I use it for phones, remotes, chargers and snacks.</p><p>Made two of these for my IKEA LANDSKRONA couch, however it should fit any couch when resized to the correct dimensions. </p><p>Fits on th... | [
"table",
"cup",
"ikea",
"ikeahack",
"remote",
"cupholder",
"remoteholder",
"coffeecup",
"couch",
"couchtable"
] | Household > Living Room | [
"222765/images/image_1_compressed.jpg"
] | [
"222765/stls/Couch armrest table.stl"
] | CC-BY | https://www.printables.com/model/222765 | data_0042.tar |
147743 | Countdown D20 |
<p>Printing without supports works, but some of the numbers will get a bit droopy. Nothing you can't clean up with snips.</p>
<p>This is a countdown die, so it is not well suited for fair rolling, but for keeping track of things.</p>
Category: Dice
| [
"thingiverse"
] | Toys & Games > Board Games | [
"147743/images/image_1_compressed.jpg"
] | [
"147743/stls/Countdown_D20.stl"
] | CC-BY | https://www.printables.com/model/147743 | data_0042.tar |
578427 | Counter | rotating helical tally counter max 30 ↦ 0 with card slot | Download free 3D printable STL models | [
"counter",
"rpg",
"openscad",
"health",
"roleplaying",
"scad",
"roleplayinggame",
"damage",
"tally",
"tallycounter",
"points",
"damagecounter"
] | Toys & Games > Board Games | [
"578427/images/image_1_compressed.jpg",
"578427/images/image_2_compressed.jpg",
"578427/images/image_3_compressed.jpg",
"578427/images/image_4_compressed.jpg",
"578427/images/image_5_compressed.jpg",
"578427/images/image_6_compressed.jpg",
"578427/images/image_7_compressed.jpg"
] | [
"578427/stls/23-263HPcounterBullet.stl",
"578427/stls/23-263HPcounterCalendar.stl",
"578427/stls/23-263HPcounterCard.stl",
"578427/stls/23-263HPcounterPlus-wall1.25.stl",
"578427/stls/23-263HPcounterPLUS.stl"
] | CC0 | https://www.printables.com/model/578427 | data_0042.tar |
162043 | Countersunk screw washer with lid |
<p>I needed this one because I did not have any normal (not countersunk) screws plus I wanted to cover the screw head when done. :)</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>RepRap</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Emaker Huxley</p></div>
<p><strong>... | [
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"162043/images/image_1_compressed.jpg",
"162043/images/image_10_compressed.jpg",
"162043/images/image_2_compressed.jpg",
"162043/images/image_3_compressed.jpg",
"162043/images/image_4_compressed.jpg",
"162043/images/image_5_compressed.jpg",
"162043/images/image_6_compressed.jpg",
"162043/images/image_... | [
"162043/stls/Screw-Lid-sNi.stl"
] | CC-BY | https://www.printables.com/model/162043 | data_0042.tar |
952600 | Couple wedding rings | <p>Signing the marriage documents, but the jeweller didn't finish working on your rings yet ?<br>So, 5 minutes of modelling and 30 minutes of printing and you have a solution.<br>I posted this model as a memory of a wonderful date with my wife.<br>Alexandra, I love you very much and I am eternally grateful to be your h... | [
"ring",
"rings",
"wedding",
"weddingrings",
"ringset",
"justmaried"
] | Fashion > Other Fashion Accessories | [
"952600/images/image_1_compressed.jpg",
"952600/images/image_2_compressed.jpg",
"952600/images/image_3_compressed.jpg"
] | [
"952600/stls/Aleksandras ring (D17mm).stl",
"952600/stls/Aleksandrs ring (D21mm).stl"
] | CC0 | https://www.printables.com/model/952600 | data_0042.tar |
147106 | Cover airpods 3 | <p>Vi fornisco del file stl e del modello funzione con la carica wireless</p> | [
"cover",
"apple",
"airpods"
] | 3D Printers > Accessories | [
"147106/images/image_1_compressed.jpg",
"147106/images/image_2_compressed.jpg"
] | [
"147106/stls/case airdpods 3 v0.stl",
"147106/stls/case airdpods 3.stl",
"147106/stls/parte superiore airdpods 3.stl"
] | CC-BY | https://www.printables.com/model/147106 | data_0042.tar |
96746 | Cover for Logitech Streamcam | <p>Slide onto the camera from above.</p><p>With Logo or without</p><p>All parts have been drawn by myself. Similarities to other parts by other designers are not intentional and or coincidental. Maybe I was inspired by other designs.</p><p>If this happened, I apologize</p> | [] | Gadgets > Computers | [
"96746/images/image_1_compressed.jpg"
] | [
"96746/stls/Logi_empty.stl",
"96746/stls/Logi_empty_round.stl",
"96746/stls/Logi_logo.stl",
"96746/stls/Logi_logo_round.stl"
] | CC0 | https://www.printables.com/model/96746 | data_0042.tar |
1227782 | Cover, Bed Holder and Stainless Steel Jaws for Elegoo Centauri Carbon | <p>Added support for Stainless Steel Jaws on the right part (the one placed at the front) and made a slight design modification to avoid a sharp edge on the side. This is an addition to this model: <a href="https://www.printables.com/model/1205177-cover-and-bed-holder-for-elegoo-centauri-carbon">https://www.printables.... | [
"holder",
"support",
"cover",
"bed",
"carbon",
"elegoo",
"rangement",
"vitre",
"centauri",
"pleateau"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1227782/images/image_1_compressed.jpg",
"1227782/images/image_2_compressed.jpg",
"1227782/images/image_3_compressed.jpg"
] | [
"1227782/stls/holder-centauri-left.stl",
"1227782/stls/holder-centauri-right-with-stainless-steel-jaws.stl"
] | CC-BY | https://www.printables.com/model/1227782 | data_0042.tar |
43930 | Covid-19 Mask Strap | <p>Remixed version of a mask strap. Lighter, more flexible, a bit longer, modified hooks.</p>
<h3>Print instructions</h3><p>No special requirements, infill 10-15%, 0,2mm speed. Included gcode file prints 5 pcs.</p> | [
"mask",
"strap",
"surgicalmaskstrap"
] | Healthcare > Home Medical Tools | [
"43930/images/image_1_compressed.jpg",
"43930/images/image_2_compressed.jpg"
] | [
"43930/stls/covid-19_mask_strap_v2.stl"
] | CC0 | https://www.printables.com/model/43930 | data_0042.tar |
612193 | Cow Wall Decor | Cow for decor your wall | Download free 3D printable STL models | [
"decoration",
"wallmount",
"cow",
"wallmounted",
"wallhanger",
"wallart",
"cows"
] | Art & Design > 2D Plates & Logos | [
"612193/images/image_1_compressed.jpg",
"612193/images/image_2_compressed.jpg",
"612193/images/image_3_compressed.jpg"
] | [
"612193/stls/cow.stl"
] | CC0 | https://www.printables.com/model/612193 | data_0042.tar |
545974 | Cowboy Boot Key Tag | <p>A key tag in the shape of a cowboy boot to let everyone know how much you enjoy playing cornhole and drinking beer.</p> | [
"keychain",
"cowboy",
"keytag",
"ranch",
"boot",
"western",
"rancher",
"southern",
"cowboyboot"
] | Fashion > Other Fashion Accessories | [
"545974/images/image_1_compressed.jpg"
] | [
"545974/stls/Cowboy Boot Key Tag.stl"
] | GPL3.0 | https://www.printables.com/model/545974 | data_0042.tar |
1361589 | Cowboy Boots Pen Holder | <p>There are 4 different cowboy boots made with AI. I touched-up some blemishes. You can use them just as deco pieces or as pen holders in the office. Fun detailed prints. I did not find too many cowboy boots of that sort around. Enjoy</p> | [
"decoration",
"art",
"penholder",
"ai",
"cowboyboot"
] | Art & Design > Other Art & Designs | [
"1361589/images/image_1_compressed.jpg",
"1361589/images/image_2_compressed.jpg",
"1361589/images/image_3_compressed.jpg",
"1361589/images/image_4_compressed.jpg"
] | [
"1361589/stls/cowboyBoot1Reduced.stl",
"1361589/stls/cowboyBoot2Reduced.stl",
"1361589/stls/cowboyBoot3Reduced.stl",
"1361589/stls/cowboyBoot4Reduced.stl",
"1361589/stls/CowboyBoots.stl"
] | CC-BY | https://www.printables.com/model/1361589 | data_0042.tar |
559449 | CPAP WS7040 driver DIN rail enclosure | <p>Nice fitting enclosure for CPAP cooling fan driver with din rail mount. Mount taken from Voron Design. Designed for self tappered m2x10 SHCS (4 pieces), but you can edit STEP file for your need.</p> | [
"cpap",
"ws7040",
"ws2403dy01v04",
"wonsmart"
] | 3D Printers > Other Printer Parts & Upgrades | [
"559449/images/image_1_compressed.jpg",
"559449/images/image_2_compressed.jpg",
"559449/images/image_3_compressed.jpg"
] | [
"559449/stls/CPAP driver bottom.stl",
"559449/stls/CPAP driver top.stl"
] | GPL3.0 | https://www.printables.com/model/559449 | data_0042.tar |
1625545 | CPS3 (Kit) Controller Side Cover Mod | <p>Cover for the sides of the controller for the CPS3 underwater drone (<a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.cpsdrone.com/">https://www.cpsdrone.com/</a>). I wanted something to protect the exposed PCB from getting water on it easily from splashes. (Note: the Kit h... | [
"drone",
"mod",
"controller",
"underwater",
"cps3"
] | Hobby & Makers > RC & Robotics | [
"1625545/images/image_1_compressed.jpg",
"1625545/images/image_2_compressed.jpg"
] | [
"1625545/stls/CPS3 (Kit) Controller Side Cover Mod_V1.stl"
] | CC-BY | https://www.printables.com/model/1625545 | data_0042.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.