model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
289820 | CPU Display stand | <p>I harvested Intel core 2 duo and I decided to make a stand for it.</p> | [
"display",
"stand",
"cpu",
"cpustand"
] | Art & Design > Other Art & Designs | [
"289820/images/image_1_compressed.jpg"
] | [
"289820/stls/CPU_STAND_HEAD.stl",
"289820/stls/CPU_STAND_LEG.stl"
] | CC-BY | https://www.printables.com/model/289820 | data_0042.tar |
248322 | CPU STORAGE BOX (AMD/INTEL LID) | <p>I remixed the original lid from thing: <a href="https://www.thingiverse.com/thing:5232760">https://www.thingiverse.com/thing:5232760</a></p><p>So I can storage CPUs sorted by brand at work.</p><p><strong>FOR AMD BOX I PRINTED AT 105% SCALE, OTHERWISE CPUS WON´T FIT</strong></p><p>All credit goes to original model.</... | [
"box",
"computer",
"storage",
"pc",
"intel",
"cpu",
"processor",
"amd"
] | Gadgets > Computers | [
"248322/images/image_1_compressed.jpg",
"248322/images/image_2_compressed.jpg"
] | [
"248322/stls/AMD LID.stl",
"248322/stls/CPU STORAGE.stl",
"248322/stls/INTEL LID.stl"
] | CC0 | https://www.printables.com/model/248322 | data_0042.tar |
403167 | CPU Tray (Intel Desktop) | <p>Holder for 16 Intel CPU with width of 37.5 mm.<br>Compatible with sockets: 775, 115X, 1200 1700</p> | [
"1200",
"1155",
"intel",
"cableholder",
"cpu",
"processor",
"775",
"1150",
"1151",
"hw",
"1700",
"1156"
] | Gadgets > Computers | [
"403167/images/image_1_compressed.jpg",
"403167/images/image_2_compressed.jpg"
] | [
"403167/stls/CPU_box.stl"
] | CC-BY | https://www.printables.com/model/403167 | data_0042.tar |
1260084 | CR 2450 Battery Tube 10 & 20 Cell | <p>No Supports needed. Be sure to orient the tray facing upward, aligned with the battery cap text so that your batteries don't spill out when you open it. Use a small amount of superglue to adhere the tray to the cap. The square notch is for alignment and fitment.</p><p>Recommend printing with 0.2 ... | [
"battery",
"cr2450"
] | Hobby & Makers > Organizers | [
"1260084/images/image_1_compressed.jpg",
"1260084/images/image_2_compressed.jpg"
] | [
"1260084/stls/CR2450 Battery Tray 10-Cell.stl",
"1260084/stls/CR2450 Battery Tray 20-Cell.stl",
"1260084/stls/CR2450 Cap.stl",
"1260084/stls/CR2450 Tube 10-Cell.stl",
"1260084/stls/CR2450 Tube 20-Cell.stl"
] | CC-BY | https://www.printables.com/model/1260084 | data_0042.tar |
137422 | CR-6 LGX Lite and Dragon Direct drive mount to the CR6 strain gauge | <h3> </h3><h3>Overview:</h3><p>This mount is part of a growing series of mounts for different hotends and extruders to the CR-6 strain gauge.</p><p>The series includes the Dragon, Mosquito and MicroSwiss hotends and the Orbiter V1.5, LGX Lite, Mjolnir and Bowden setup extrusion systems.</p><p>To be upfront: the st... | [
"dragon",
"cr6",
"cr6se",
"crealitycr6",
"lgxlite",
"bondtechlgxlite"
] | 3D Printers > Other Printer Parts & Upgrades | [
"137422/images/image_1_compressed.jpg",
"137422/images/image_2_compressed.jpg"
] | [
"137422/stls/backplate hole template.stl",
"137422/stls/LGX Lite & Dragon mount 4.2 mm hotmelts.stl",
"137422/stls/LGX Lite & Dragon mount 4.5&4.6 mm hotmelts.stl",
"137422/stls/LGX Lite & Dragon mount 5 mm hotmelts.stl"
] | CC-BY | https://www.printables.com/model/137422 | data_0042.tar |
206222 | CR-6 SE 22mm Bowden Clip | <p>A modified version of Vinzent's Bowden clip for the CR-6 SE printer, the cable holder widened to support the 22mm cables that came with my printer. I also changed the mechanism to attach to the Bowden tube to make it easier to install, and also be able to slide along the tube to prevent the cable snagging as the pri... | [
"upgrade",
"creality"
] | 3D Printers > Other Printer Parts & Upgrades | [
"206222/images/image_1_compressed.jpg",
"206222/images/image_2_compressed.jpg",
"206222/images/image_3_compressed.jpg"
] | [
"206222/stls/BowdenClip_v3.stl"
] | CC-BY | https://www.printables.com/model/206222 | data_0042.tar |
265214 | CR-6 SE Part Cooling Fan cr6 |
<p>Part cooling fan for the Creality CR6 SE that uses the stock blower flan but directs the airflow closer to the nozzle.</p>
<p>Version for 40mm quiet fans: <a href="https://www.thingiverse.com/thing:4777287">https://www.thingiverse.com/thing:4777287</a></p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong... | [
"thingiverse"
] | 3D Printers > Other Printer Parts & Upgrades | [
"265214/images/image_1_compressed.jpg",
"265214/images/image_2_compressed.jpg",
"265214/images/image_3_compressed.jpg",
"265214/images/image_4_compressed.jpg",
"265214/images/image_5_compressed.jpg",
"265214/images/image_6_compressed.jpg",
"265214/images/image_7_compressed.jpg",
"265214/images/image_8... | [
"265214/stls/CR6_SE_fan_bracket.stl",
"265214/stls/CR6_SE_fan_duct.stl"
] | CC-BY | https://www.printables.com/model/265214 | data_0042.tar |
1002777 | CR-Touch to BTT EDDY Adapter Bracket | <p>Made this to use a BTT Eddy probe in my Ender 3 V3 KE, if my measurements are correct it should have the exact same XY offset as a CR-Touch and the height has 10mm of adjustment going from 35mm to 45mm.<br><br>Now I only need to figure out how to install and configure the damned thing! Any help in that regard would ... | [
"mount",
"creality",
"bracket",
"mounting",
"mountingbracket",
"btt",
"crtouch",
"crtouchholder",
"crtouchmount",
"eddy",
"e3v3ke"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1002777/images/image_1_compressed.jpg",
"1002777/images/image_2_compressed.jpg",
"1002777/images/image_3_compressed.jpg"
] | [
"1002777/stls/CR-Touch to Eddy_1_V1.stl",
"1002777/stls/CR-Touch to Eddy_2_V1.stl",
"1002777/stls/CR-Touch to Eddy_3_V1.stl"
] | CC-BY | https://www.printables.com/model/1002777 | data_0042.tar |
1032796 | Cr10 / Ender 3 Direct Drive | <p>I didn't want to tune my support setting so I edited this to remove the logo and make it so you can just breck off the supports. The bottom surface didn't come out great so now there's 2 layers as supports instead of 1.</p> | [
"cr10",
"supportless",
"ender3",
"directdrive",
"directdriveextruder"
] | 3D Printers > Creality Parts & Upgrades | [
"1032796/images/image_1_compressed.jpg",
"1032796/images/image_2_compressed.jpg",
"1032796/images/image_3_compressed.jpg",
"1032796/images/image_4_compressed.jpg",
"1032796/images/image_5_compressed.jpg",
"1032796/images/image_6_compressed.jpg",
"1032796/images/image_7_compressed.jpg",
"1032796/images... | [
"1032796/stls/direct_drive_extruder_bracket_v1.3.stl"
] | GPL2.0 | https://www.printables.com/model/1032796 | data_0042.tar |
88648 | CR10/ Ender 3 Magnetic Bed Aligner | <p>Got a CR10/Ender 3 with a Magnetic Steel sheet? Hate aligning it? Me too! This mod screws in above your springs/ spacers, and gives you the best alignment possible for your bed, similar to a Prusa. <br> <br>Can work in conjunction with TH3D Cr10 Strain reliefs, and many others!</p><p>PLEASE, print in ASA o... | [
"cr10",
"creality",
"magnetic",
"crealityender3",
"alignment",
"magneticbed",
"springsteel"
] | 3D Printers > Creality Parts & Upgrades | [
"88648/images/image_1_compressed.jpg",
"88648/images/image_2_compressed.jpg",
"88648/images/image_3_compressed.jpg",
"88648/images/image_4_compressed.jpg"
] | [
"88648/stls/Front spacers.stl",
"88648/stls/Rear Left.stl",
"88648/stls/Rear Right.stl"
] | GPL2.0 | https://www.printables.com/model/88648 | data_0042.tar |
99944 | CR2032 6V NO SOLDERING | <p>Here is a solution when you need to work on a small space and you don't have any Ironsolder around.<br><br>Perfecto for small projects as the following.</p><figure class="media"><oembed url="https://youtu.be/kgAf3SAJy8g"></oembed></figure> | [
"battery",
"cr2032",
"batteryholder",
"cr2032battery"
] | Hobby & Makers > Electronics | [
"99944/images/image_1_compressed.jpg"
] | [
"99944/stls/CR2032_CASE.stl"
] | CC0 | https://www.printables.com/model/99944 | data_0042.tar |
405376 | CR2032 holders Single, Double, and Triple Series for 3v 6v 9v (No support needed) | <p>A quick 3d model to hold some CR2032 cells in series for a project. Easily thread your wire through the side holes to make contact, you can adjust the tightness by changing the width scaling in your slicer.</p><p>To support me, donate to my Patreon. <a href="https://www.patreon.com/RinoaSG">https://www.patreon.com/R... | [
"holder",
"case",
"enclosure",
"housing",
"cr2032",
"connector",
"lir2032",
"buttoncell"
] | Hobby & Makers > Electronics | [
"405376/images/image_1_compressed.jpg"
] | [
"405376/stls/CR2032all.stl",
"405376/stls/CR2032Double.stl",
"405376/stls/CR2032Single.stl",
"405376/stls/CR2032Triple.stl"
] | CC0 | https://www.printables.com/model/405376 | data_0042.tar |
1523200 | Crash Derby Ice Scream Truck Model | <p>This is a twisted take on an ice cream truck crash derby car. The Ice Scream Truck is a sweet ride, but will not be a treat for the other players! <br><br>Should fit any of the stock chassis models, but was designed for the original van chassis.</p><p>Prusa Slicer MMU Project: <br>0.12 layer height<br>15% ... | [
"game",
"figure",
"car",
"boardgames",
"truck",
"boardgame",
"cars",
"crashderby",
"icecreamtruck"
] | Toys & Games > Board Games | [
"1523200/images/image_1_compressed.jpg",
"1523200/images/image_10_compressed.jpg",
"1523200/images/image_2_compressed.jpg",
"1523200/images/image_3_compressed.jpg",
"1523200/images/image_4_compressed.jpg",
"1523200/images/image_5_compressed.jpg",
"1523200/images/image_6_compressed.jpg",
"1523200/image... | [
"1523200/stls/CrashDerby_IceScreamTruck_Body.stl",
"1523200/stls/CrashDerby_Van_Base.stl",
"1523200/stls/CrashDerby_Van_Chassis.stl",
"1523200/stls/IceScreamTruck+MK4_MMU3_PSProject_01.stl"
] | CC-BY | https://www.printables.com/model/1523200 | data_0042.tar |
80994 | Crash leveler for Dual Z-screw 3D Printers (Ender 3, Mega Zero etc) |
<p><strong>UPDATE:</strong> I've added the "Compact Crash Leveler" remix by <a href="/foureight84/designs">@foureight84</a></p>
<p>This is designed to fit all 3D Printers with Dual Z-screws that use 40x20mm Extruded frames. eg Anycubic Mega Zero, Creality Ender 3 etc</p>
<p>This will allow you to level your prin... | [
"creality",
"ender3",
"thingiverse",
"anycubicmegazero",
"crashleveler"
] | 3D Printers > Accessories | [
"80994/images/image_1_compressed.jpg",
"80994/images/image_2_compressed.jpg",
"80994/images/image_3_compressed.jpg",
"80994/images/image_4_compressed.jpg",
"80994/images/image_5_compressed.jpg",
"80994/images/image_6_compressed.jpg"
] | [
"80994/stls/Compact_Crash_Leveler.stl",
"80994/stls/Crash_leveller_v6.stl"
] | CC-BY | https://www.printables.com/model/80994 | data_0042.tar |
349284 | Crate | <p>It's a box/crate</p> | [
"box",
"crate"
] | Hobby & Makers > Tools | [
"349284/images/image_1_compressed.jpg"
] | [
"349284/stls/Cool Inari.stl"
] | CC-BY | https://www.printables.com/model/349284 | data_0042.tar |
77159 | Crayola compatible marker cap replacement | <p>My first project to learn Fusion 360. Got it right after 3 printings.</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3</p></div><strong>Rafts:</strong></p>
<p>No</p>
<p><p class="detail-setting supports... | [
"replacement",
"thingiverse",
"f3d"
] | Art & Design > Other Art & Designs | [
"77159/images/image_1_compressed.jpg",
"77159/images/image_2_compressed.jpg"
] | [
"77159/stls/Crayola_marker_cap.stl"
] | CC-BY | https://www.printables.com/model/77159 | data_0042.tar |
125425 | Crealilty Hotend ADXL345 Nozzle Mount | <p>This is a quick and simple model to mount the adxl345 to Creality style hotend nozzles.</p> | [
"nozzle",
"creality",
"ender",
"accelerometer",
"ender3",
"ender5",
"adxl345",
"adxl"
] | 3D Printers > Other Printer Parts & Upgrades | [
"125425/images/image_1_compressed.jpg",
"125425/images/image_2_compressed.jpg"
] | [
"125425/stls/Creality_ADXL345_Nozzle_Mount.stl"
] | CC0 | https://www.printables.com/model/125425 | data_0042.tar |
208643 | Creality Extruder Knob | <p>Creality Extruder Knob</p><p>Thankyou for all the Stars</p> | [
"creality"
] | 3D Printers > Creality Parts & Upgrades | [
"208643/images/image_1_compressed.jpg",
"208643/images/image_2_compressed.jpg"
] | [
"208643/stls/Feeder Knob.stl"
] | CC-BY | https://www.printables.com/model/208643 | data_0042.tar |
193589 | Creality CR Touch mount for Voxelab Aquila |
<p>tl:dr</p>
<p>Just the same as the source, but with the mounting screws moved slightly for a better fit and made the mount thicker to reduce the Z-offset. Second version has tab to hit x-axis homing switch.</p>
<p>Long explanation:</p>
<p>I liked mharrand's mount for the CR touch, but when I printed it, it wasn't ... | [
"thingiverse",
"bltouch",
"aquila"
] | 3D Printers > Creality Parts & Upgrades | [
"193589/images/image_1_compressed.jpg",
"193589/images/image_2_compressed.jpg",
"193589/images/image_3_compressed.jpg",
"193589/images/image_4_compressed.jpg"
] | [
"193589/stls/Voxelab_Aquila_CR_Touch_Bracket.stl",
"193589/stls/Voxelab_Aquila_CR_Touch_Bracket_with_tab.stl"
] | CC-BY | https://www.printables.com/model/193589 | data_0042.tar |
460804 | Creality Damping Feet | <p>These printer feet are designed to reduce printer noise by dampening vibrations caused by the motors. The micro vibrations produced by the printers can cause the surface it is placed on to vibrate, resulting in a louder printing experience. By using these feet, the printer's noise can be greatly reduced. The design ... | [
"dampingfeet"
] | 3D Printers > Creality Parts & Upgrades | [
"460804/images/image_1_compressed.jpg"
] | [
"460804/stls/Damper_IN.stl",
"460804/stls/Damper_OUT.stl"
] | CC0 | https://www.printables.com/model/460804 | data_0042.tar |
553687 | Creality Ender 3 Neo LCD Display Cover | <p>Just a simple LCD Cover for Creality Ender 3 Neo</p> | [
"ender3",
"displaycover"
] | 3D Printers > Creality Parts & Upgrades | [
"553687/images/image_1_compressed.jpg"
] | [
"553687/stls/Ender3_Simple_LCD_Cover.stl"
] | GPL2.0 | https://www.printables.com/model/553687 | data_0042.tar |
375266 | Creality Ender 3 S1 - Filament holder DELUXE | <p>Improved various parts of the holder. Most notably the fitment of the “bajonet” mount that attached the filament holder to the mount. And the holder itself has better bearing fitment. Also added a few bonus parts and removed the need of the “bearing washers”.</p><p>Will fit the Ender 3 S1 / S1 PRO / S1 Large</p><p><... | [
"creality",
"ender",
"ender3s1",
"ender3s1pro",
"ender3s1large"
] | 3D Printers > Creality Parts & Upgrades | [
"375266/images/image_1_compressed.jpg",
"375266/images/image_2_compressed.jpg",
"375266/images/image_3_compressed.jpg"
] | [
"375266/stls/bajonet_mount.stl",
"375266/stls/counter_nut.stl",
"375266/stls/DIN125 - Washer - M8.stl",
"375266/stls/end_cap.stl",
"375266/stls/filament_holder.stl",
"375266/stls/filament_nut.stl"
] | CC-BY | https://www.printables.com/model/375266 | data_0042.tar |
1183299 | Creality Ender 3 V3 SE tool holder | <p>You can mount it on the highest point of the printer or the lowest. (You can find example in the pictures.)</p><p>Please print it at higher infill, so it doesn't snap off. (I recommend 30%+ infill.) I also recommend printing it at slower speeds so everything is the size it should be.</p> | [
"3d",
"tool",
"holder",
"3dprinting",
"3dprintable",
"3",
"tools",
"3dprinter",
"toolholder",
"toolstorage",
"holders",
"3dprinted",
"3dmodel",
"3dprint",
"3dprinterparts",
"toolorganizer",
"3dprinteraccessory",
"3dprinteraccessories",
"toolsorganizer",
"3dprinterupgrade"
] | 3D Printers > Creality Parts & Upgrades | [
"1183299/images/image_1_compressed.jpg",
"1183299/images/image_2_compressed.jpg",
"1183299/images/image_3_compressed.jpg"
] | [
"1183299/stls/Ender 3 V3 SE tools holder.stl"
] | CC-BY | https://www.printables.com/model/1183299 | data_0042.tar |
550016 | CREALITY ENDER-3 S1 PRO - CABLE CLIP | <p><strong>CREALITY ENDER-3 S1 PRO - CABLE CLIP</strong> Drucker Aktualisierung und Modifikation - Viel Spass mit unserer Version. Bei Fragen einfach einen Kommentar schreiben</p><p>Dieses Produkt darf nur für den persönlichen Gebrauch gedruckt und nicht verkauft werden</p><p>Wenn unsere Modelle reproduziert werden, fr... | [
"grafikgestalter"
] | 3D Printers > Creality Parts & Upgrades | [
"550016/images/image_1_compressed.jpg"
] | [
"550016/stls/001.1_Cable_Clip.stl"
] | CC-BY | https://www.printables.com/model/550016 | data_0042.tar |
876505 | Creality Ender-3 V3 SE Filament Guide Roller | <p>Regular settings. No supports needed.</p> | [
"spool",
"filament",
"guide"
] | 3D Printers > Creality Parts & Upgrades | [
"876505/images/image_1_compressed.jpg",
"876505/images/image_2_compressed.jpg"
] | [
"876505/stls/FilamentRoller.stl"
] | CC-BY | https://www.printables.com/model/876505 | data_0042.tar |
959876 | Creality Extruder Knob | [] | 3D Printers > Creality Parts & Upgrades | [
"959876/images/image_1_compressed.jpg",
"959876/images/image_2_compressed.jpg",
"959876/images/image_3_compressed.jpg",
"959876/images/image_4_compressed.jpg"
] | [
"959876/stls/Creality_Extruder_Knob.stl"
] | CC0 | https://www.printables.com/model/959876 | data_0042.tar | |
392505 | Creality Halot one | Držák na odkapání tiskového plátu , drip tray holder | Download free 3D printable STL models | [
"holder",
"creality",
"resin"
] | 3D Printers > Creality Parts & Upgrades | [
"392505/images/image_1_compressed.jpg",
"392505/images/image_2_compressed.jpg",
"392505/images/image_3_compressed.jpg",
"392505/images/image_4_compressed.jpg"
] | [
"392505/stls/creality table holder V2.stl",
"392505/stls/creality table holder V3.stl"
] | CC0 | https://www.printables.com/model/392505 | data_0042.tar |
1258733 | Creality Hi Waste Box | <p>there are 2 variant waste box, the small version can be printed in 180x180 </p><p>Standard Setting / PLA / 0.2mm</p> | [
"creality",
"crealityhi"
] | 3D Printers > Creality Parts & Upgrades | [
"1258733/images/image_1_compressed.jpg",
"1258733/images/image_2_compressed.jpg"
] | [
"1258733/stls/Waste Box Smol.stl",
"1258733/stls/Waste Box.stl"
] | CC-BY | https://www.printables.com/model/1258733 | data_0042.tar |
846464 | CREALITY K1 ACTIVATED CHARCOAL AIR FILTER | <p>**UPDATE: Although very tight at first, the filter seems to loosen and can fall off over time due to the K1 back ribs flexing outward. Recommend using doubleside tape or similar adhesive to keep filer plugged on the K1 (6/12/2024)</p><h3>CREALITY K1 ACTIVATED CHARCOAL AIR FILTER</h3><p>FEATURES</p><ul><l... | [
"filter",
"pellets",
"k1",
"charcoal"
] | 3D Printers > Creality Parts & Upgrades | [
"846464/images/image_1_compressed.jpg",
"846464/images/image_2_compressed.jpg",
"846464/images/image_3_compressed.jpg",
"846464/images/image_4_compressed.jpg",
"846464/images/image_5_compressed.jpg",
"846464/images/image_6_compressed.jpg",
"846464/images/image_7_compressed.jpg"
] | [
"846464/stls/K1 FILTER ALL PARTS.stl",
"846464/stls/K1 FILTER COVER LID.stl",
"846464/stls/K1 FILTER MAIN BODY.stl",
"846464/stls/K1 FILTER SCREEN.stl"
] | CC0 | https://www.printables.com/model/846464 | data_0042.tar |
610765 | Creality K1 door | <p>It is the door replacement from Creality K1 for cutting (mill or laser, but laser preferred).<br>I cut it with the CNC laser from a 4mm clear acrylic sheet.<br>A 3mm acrylic sheet will work fine too.<br>If you will cut it by mill, you need to file the corners near the hinges.<br>Of course, acrylic is easily scratche... | [
"door",
"creality",
"lasercut",
"k1"
] | 3D Printers > Creality Parts & Upgrades | [
"610765/images/image_1_compressed.jpg",
"610765/images/image_2_compressed.jpg",
"610765/images/image_3_compressed.jpg",
"610765/images/image_4_compressed.jpg",
"610765/images/image_5_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/610765 | data_0042.tar |
882264 | Creality K1 Flanged Bearing Gantry Project Remix | <p><strong>The motormounts in the photo are slightly different, they are the old version. The attached files contain all models of the current version at the time of publication.</strong></p> | [
"creality",
"rods",
"gantry",
"k1",
"crealityk1",
"crealityk1c",
"k1c"
] | 3D Printers > Creality Parts & Upgrades | [
"882264/images/image_1_compressed.jpg",
"882264/images/image_2_compressed.jpg",
"882264/images/image_3_compressed.jpg",
"882264/images/image_4_compressed.jpg",
"882264/images/image_5_compressed.jpg",
"882264/images/image_6_compressed.jpg"
] | [
"882264/stls/Higher_Tensioner_Spacer.stl",
"882264/stls/Interbearing Washer.stl",
"882264/stls/Left Tensioner.stl",
"882264/stls/Left Y Carriage.stl",
"882264/stls/Left_Stepper_Mount.stl",
"882264/stls/Left_Tensioner_Housing.stl",
"882264/stls/Left_Y_Carriage_Rail.stl",
"882264/stls/Left_Y_Carriage_Ra... | CC-BY | https://www.printables.com/model/882264 | data_0042.tar |
1036358 | creality K1 K1C K1 MAX screen cover | [
"creality",
"creative",
"k1",
"crealityk1",
"k1c"
] | 3D Printers > Creality Parts & Upgrades | [
"1036358/images/image_1_compressed.jpg",
"1036358/images/image_2_compressed.jpg",
"1036358/images/image_3_compressed.jpg"
] | [
"1036358/stls/creality k1 screen cover.stl"
] | GPL2.0 | https://www.printables.com/model/1036358 | data_0042.tar | |
865497 | Creality K1 Max Tool Tray - Clean | [
"creality",
"k1",
"k1max"
] | 3D Printers > Accessories | [
"865497/images/image_1_compressed.jpg",
"865497/images/image_2_compressed.jpg"
] | [
"865497/stls/Bandeja para Derecha.stl",
"865497/stls/Bandeja para Izquierda.stl"
] | CC0 | https://www.printables.com/model/865497 | data_0042.tar | |
999894 | Creality K1 TRIGGER Extruder | <p><i><strong>Download the Installation guide and read carefully before taking on this modification. Go to the files tab page and scroll down until you find the PDF file for the installation guide. This extruder requires you to remove material from your K1 toolhead in order to fit it.</strong></i></p><p><strong>29.12.2... | [
"extruder",
"filamentsensor",
"cyclops",
"orbiterv2",
"crealityk1",
"crealityk1max",
"crealityk1c"
] | 3D Printers > Creality Parts & Upgrades | [
"999894/images/image_1_compressed.jpg",
"999894/images/image_2_compressed.jpg",
"999894/images/image_3_compressed.jpg",
"999894/images/image_4_compressed.jpg",
"999894/images/image_5_compressed.jpg",
"999894/images/image_6_compressed.jpg"
] | [
"999894/stls/Libra Latch Arm.stl",
"999894/stls/Libra Shaft Spacer 0p45mm thk.stl",
"999894/stls/Libra Shaft Spacer 0p55mm thk.stl",
"999894/stls/Libra Shaft Spacer 0p5mm thk.stl",
"999894/stls/Libra Shaft Spacer 0p95mm thk.stl",
"999894/stls/Libra Shaft Spacer 1mm thk.stl",
"999894/stls/Libra Shaft Spa... | CC-BY | https://www.printables.com/model/999894 | data_0042.tar |
570826 | Creality K1 / K1 MAX nozzles case | <p>Case with cover for Creality K1 / K1 MAX nozzles. </p> | [
"box",
"case",
"nozzle",
"nozzleholder",
"max",
"nozzlebox",
"k1",
"k1max"
] | 3D Printers > Creality Parts & Upgrades | [
"570826/images/image_1_compressed.jpg",
"570826/images/image_2_compressed.jpg"
] | [
"570826/stls/k1 nozzle case - body v1 - 0.2 to 1.0.stl",
"570826/stls/k1 nozzle case - body v1 - 0.2 to 1.2.stl",
"570826/stls/k1 nozzle case - body v2 - 0.2 to 1.0.stl",
"570826/stls/k1 nozzle case - body v2 - 0.2 to 1.2.stl",
"570826/stls/k1 nozzle case - cover v1.stl",
"570826/stls/k1 nozzle case - cov... | LGPL | https://www.printables.com/model/570826 | data_0042.tar |
545337 | Creality K1/K1 Max tool box to the Ikea Skadis | Attaching the tool box from Creality K1/K1 Max to the Ikea Skadis. | Download free 3D printable STL models | [
"tool",
"ikea",
"creality",
"tools",
"werkzeug",
"skadis",
"werkzeughalter",
"werkzeugbox",
"crealityk1",
"crealityk1max"
] | 3D Printers > Accessories | [
"545337/images/image_1_compressed.jpg",
"545337/images/image_2_compressed.jpg"
] | [
"545337/stls/IKEA Skadis tools Creality K1K1 MAX.stl"
] | CC-BY | https://www.printables.com/model/545337 | data_0042.tar |
928599 | Creality K1/K1C Hinged Lid Riser using stock hardware | <p>I wanted a riser for my K1C which would allow me to secure the corners using the M3x8 screws which already support the printer lid.<br><br>I modified the Creality K1/K1C Hinged Riser corners to allow me to do this.</p><p><strong>Features</strong></p><ul><li>No supports required</li><li>No bed adhesion required (i.e.... | [
"riser",
"k1",
"k1c"
] | 3D Printers > Creality Parts & Upgrades | [
"928599/images/image_1_compressed.jpg",
"928599/images/image_2_compressed.jpg",
"928599/images/image_3_compressed.jpg",
"928599/images/image_4_compressed.jpg"
] | [
"928599/stls/Creality K1C Hinged Lid Riser - Camera Corner (v2) - OE hardware.stl",
"928599/stls/Creality K1C Hinged Lid Riser - Front Corner (v2) - OE Hardware.stl",
"928599/stls/Creality K1C Hinged Lid Riser - Hinged Back Corners - OE hardware.stl"
] | CC-BY | https://www.printables.com/model/928599 | data_0042.tar |
1195620 | Creality K2 Plus Lead Screw Debris Guards with Taper | <p>I created these early on for two reasons; cleaning out filament debris from the small cavity surrounding the leadscrew rotation area at the bottom of the printer was tedious. As well if any instance of filament strands or dirt getting pulled into the bearing of the leadscrew motor (Pretty unlikely though). ... | [
"guard",
"creality",
"leadscrew",
"k2",
"k2plus"
] | 3D Printers > Creality Parts & Upgrades | [
"1195620/images/image_1_compressed.jpg",
"1195620/images/image_2_compressed.jpg",
"1195620/images/image_3_compressed.jpg",
"1195620/images/image_4_compressed.jpg",
"1195620/images/image_5_compressed.jpg",
"1195620/images/image_6_compressed.jpg",
"1195620/images/image_7_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/1195620 | data_0042.tar |
1523163 | Creality K2 SE Poop Basket | <p>This model contains two files for a poop basket to fit on the Creality K2 SE printer. One is a bracket which attaches to two holes built into the back of the machine. The other is a small basket which is held into place by the bracket. The basket can be easily removed, emptied, and then put back into place.</p><p>I ... | [
"poop",
"basket"
] | 3D Printers > Creality Parts & Upgrades | [
"1523163/images/image_1_compressed.jpg",
"1523163/images/image_2_compressed.jpg",
"1523163/images/image_3_compressed.jpg",
"1523163/images/image_4_compressed.jpg",
"1523163/images/image_5_compressed.jpg",
"1523163/images/image_6_compressed.jpg",
"1523163/images/image_7_compressed.jpg",
"1523163/images... | [
"1523163/stls/Creality Poop Basket 2 plus 2 plus 4.stl",
"1523163/stls/Creality Poop Basket 2.stl",
"1523163/stls/Creality Poop Basket Bracket 2 plus 2 plus4.stl",
"1523163/stls/Creality Poop Basket Bracket 2.stl"
] | CC0 | https://www.printables.com/model/1523163 | data_0042.tar |
878143 | Creality Keyring | <p>Just a small Creality logo keyring for your Creality flash drives.<br> </p><p>2 versions, up to you to choose the one you like best.<br> </p><p>Printed on my Ender3 V3 SE "Nebula Pad upgraded":<br>- 0.20<br>- 3 bottoms<br>- 4 tops<br>- 2 walls<br>- 20% infill (too much maybe)<br>Sliced with Orca to pause a... | [
"keychain",
"key",
"keyring",
"keys",
"keychains"
] | 3D Printers > Accessories | [
"878143/images/image_1_compressed.jpg",
"878143/images/image_2_compressed.jpg",
"878143/images/image_3_compressed.jpg"
] | [
"878143/stls/Creality Keyring v1.stl",
"878143/stls/Creality Keyring v6.stl"
] | CC-BY | https://www.printables.com/model/878143 | data_0042.tar |
972877 | Creality LED Bar compatible Anti-Shake Construction Top Caps. | <p>Nothing unusual, I printed mine on their sides for the best strenght along the important axis, used supports for the LED Bar's mounting point but it doesn't really matter because the ugly parts get covered by the LED Bar.<br><br>This is only the top parts, for the rest of the Anti Shake Construction parts go to http... | [
"topper",
"antiwobble",
"ender3v3se",
"ender3v3ke"
] | 3D Printers > Creality Parts & Upgrades | [
"972877/images/image_1_compressed.jpg",
"972877/images/image_2_compressed.jpg"
] | [
"972877/stls/Top+Light Bar L.stl",
"972877/stls/Top+Light Bar R.stl"
] | CC0 | https://www.printables.com/model/972877 | data_0042.tar |
843172 | Creality Nebula Camera Mount for Ender 3 V3 KE | <p>A mount for the nebula camera, placing it at the front corner. It uses the bracket for the screen so you’ll either need longer screws or to move the screen off the printer like I did. </p><p>I used this file for my screen stand: <a href="https://www.thingiverse.com/thing:6505176">Stand for Nebula Pad by hlx38 -... | [
"nebulacamera",
"crealitynebula",
"nebulacameramount"
] | 3D Printers > Creality Parts & Upgrades | [
"843172/images/image_1_compressed.jpg",
"843172/images/image_2_compressed.jpg",
"843172/images/image_3_compressed.jpg",
"843172/images/image_4_compressed.jpg"
] | [
"843172/stls/Nebula Camera Mount.stl"
] | CC-BY | https://www.printables.com/model/843172 | data_0042.tar |
414533 | Creality Sonic Pad Mount for Ender 3 S1 / Pro | <p>I finished setting up my Creality Sonic Pad with my Ender 3 S1 Pro. Now where to put it?</p><p>I was looking for a clean look as well as practicality.</p><p>Some solutions I was looking at online, mount it instead of the old Ender 3 display, or anywhere to the side of the printer. Some also on top of the printer.</p... | [
"ender3",
"thingiverse",
"ender3s1pro",
"crealitysonicpad",
"sonicpad",
"sonicpadmount"
] | 3D Printers > Accessories | [
"414533/images/image_1_compressed.jpg",
"414533/images/image_2_compressed.jpg",
"414533/images/image_3_compressed.jpg",
"414533/images/image_4_compressed.jpg",
"414533/images/image_5_compressed.jpg",
"414533/images/image_6_compressed.jpg",
"414533/images/image_7_compressed.jpg",
"414533/images/image_8... | [
"414533/stls/Creality_Sonic_Pad_Mount_for_Ender_3_S1_and_Pro_Full.stl",
"414533/stls/Creality_Sonic_Pad_Mount_for_Ender_3_S1_and_Pro_Left.stl",
"414533/stls/Creality_Sonic_Pad_Mount_for_Ender_3_S1_and_Pro_Right.stl"
] | CC-BY | https://www.printables.com/model/414533 | data_0042.tar |
1034009 | Creality Space Pi - PTFE TUBE ATTACHMENT | <p>layer height 0.2. used 5 walls , just use as many as you would like Its a small piece so wont take much time so better make it robust.</p><p>Material Used - PETG, or any you would like . like PLA</p><p>Tolerance - 0.25</p><p>Supported PTFE Tube - 4mm OD</p><p>Printer Used - bambu Lab A1, I have creality K1 MAX also ... | [] | 3D Printers > Creality Parts & Upgrades | [
"1034009/images/image_1_compressed.jpg",
"1034009/images/image_2_compressed.jpg"
] | [
"1034009/stls/PTFE_SpacePI_Attachment_Bottom.stl",
"1034009/stls/PTFE_SpacePI_Attachment_Bottom_Top.stl"
] | CC0 | https://www.printables.com/model/1034009 | data_0042.tar |
528485 | Creality Sprite Extruder (Pro) - Cable Holder | <p>The Creality Sprite Extruder (Pro) has a very long cable and I don't like the idea it being tangled. So, I designed a cable holder that keeps the cable high up, also, because it has a wide gap that the cable passes through, the cable can freely slide from right to left.</p><p>There are two parts that needs to be pri... | [
"extruder",
"creality",
"ender3",
"sprite",
"ender3pro",
"spriteextruder",
"spriteextruderpro"
] | 3D Printers > Creality Parts & Upgrades | [
"528485/images/image_1_compressed.jpg",
"528485/images/image_10_compressed.jpg",
"528485/images/image_2_compressed.jpg",
"528485/images/image_3_compressed.jpg",
"528485/images/image_4_compressed.jpg",
"528485/images/image_5_compressed.jpg",
"528485/images/image_6_compressed.jpg",
"528485/images/image_... | [
"528485/stls/Cable_Holder_v003_PartA.stl",
"528485/stls/Cable_Holder_v003_PartA_Test.stl",
"528485/stls/Cable_Holder_v003_PartB.stl",
"528485/stls/Cable_Holder_v003_PartB_Test.stl"
] | CC0 | https://www.printables.com/model/528485 | data_0042.tar |
249440 | Credit Card Comb | <p>Simple credit card comb inspired by the metal ones.<br>Some different variations depending on your needs and wants.<br>For tilted version make sure to print with a small layer height, ideally bellow 0.12mm.</p> | [
"comb",
"creditcard",
"hair",
"creditcardsized",
"combing"
] | Fashion > Other Fashion Accessories | [
"249440/images/image_1_compressed.jpg",
"249440/images/image_2_compressed.jpg",
"249440/images/image_3_compressed.jpg"
] | [
"249440/stls/comb rounded edge base tilted.stl",
"249440/stls/comb rounded edge base.stl",
"249440/stls/comb rounded edge tilted.stl",
"249440/stls/comb rounded edge.stl",
"249440/stls/comb straight edge tilted.stl",
"249440/stls/comb straight edge.stl"
] | GPL3.0 | https://www.printables.com/model/249440 | data_0042.tar |
1084032 | Credit Card Phone Holder (Print In Place) Maywork V.1 | <p><strong>Story :</strong></p><p>So i saw a simmilar model once and i really liked it but it used living hinges and it didnt last long and since i havent found any other good models i made my own take on this design and i think it worked out decently. It might be a bit on the thicker side and the hinges arent perfect ... | [
"phonestand",
"phoneholder"
] | Gadgets > Portable Devices | [
"1084032/images/image_1_compressed.jpg",
"1084032/images/image_2_compressed.jpg",
"1084032/images/image_3_compressed.jpg",
"1084032/images/image_4_compressed.jpg",
"1084032/images/image_5_compressed.jpg"
] | [
"1084032/stls/Phone Holder.stl"
] | CC0 | https://www.printables.com/model/1084032 | data_0042.tar |
41881 | Creep Test | <p>This Part is designed for creeptests. At the Beginning the shorter length is 10mm. After some time the distance increases. The picture shows the deformation on white PLA after one month with a load of 350g.</p><p>My goal ist it to compare the duration of different Materialien. I will load several frames made from di... | [
"testprint",
"creeping",
"creep"
] | 3D Printers > Test Models | [
"41881/images/image_1_compressed.jpg",
"41881/images/image_2_compressed.jpg",
"41881/images/image_3_compressed.jpg",
"41881/images/image_4_compressed.jpg",
"41881/images/image_5_compressed.jpg"
] | [
"41881/stls/Flaschenhalter01.stl",
"41881/stls/Fliessrahmen.stl"
] | GPL3.0 | https://www.printables.com/model/41881 | data_0042.tar |
137219 | Creeper coin (Minecraft) | <p>Malá drobná mince s motivem Creepera z Minecraftu, ideální pro různé hry.</p> | [
"coin",
"minecraft"
] | Toys & Games > Other Toys & Games | [
"137219/images/image_1_compressed.jpg",
"137219/images/image_2_compressed.jpg"
] | [
"137219/stls/Creeper coin (minecraft).stl"
] | CC0 | https://www.printables.com/model/137219 | data_0042.tar |
6123 | Creepy See-Through Halloween Spider | <p>See-through spider with just the right thickness (1mm) to be flexible. Decorate your house or scare the kids. Easy and fast print (20min).</p>
<h3>Print instructions</h3><p>Feel free to scale this up or down but 1mm thickness (z-axis) is recommended.</p> | [] | Seasonal designs > Autumn & Halloween | [
"6123/images/image_1_compressed.jpg",
"6123/images/image_10_compressed.jpg",
"6123/images/image_11_compressed.jpg",
"6123/images/image_2_compressed.jpg",
"6123/images/image_3_compressed.jpg",
"6123/images/image_4_compressed.jpg",
"6123/images/image_5_compressed.jpg",
"6123/images/image_6_compressed.jp... | [
"6123/stls/spider-sillouette.stl",
"6123/stls/spider_sillouette-beziercurve.stl"
] | CC-BY | https://www.printables.com/model/6123 | data_0042.tar |
77799 | Crest of House Atreides | <p>Since I can't wait to see the dune movie I made an interpretation of the crest of house atreides.</p><p>Scale the X and Y axes to your liking, keep the z hight for multicolor printing with filament changes.</p><p>You can attach a small magnet to the back and wear it on your shirt or use it as refridgerator magnet.</... | [
"color",
"crest",
"change",
"dune",
"atreides"
] | Costumes & Accessories > Props | [
"77799/images/image_1_compressed.jpg",
"77799/images/image_2_compressed.jpg",
"77799/images/image_3_compressed.jpg",
"77799/images/image_4_compressed.jpg",
"77799/images/image_5_compressed.jpg"
] | [
"77799/stls/Atreides_Crest_smol.stl"
] | CC0 | https://www.printables.com/model/77799 | data_0042.tar |
393332 | cricket skeleton | <p>utilisez les options dans prusaSlicer, echelle et diviser en objet, pour mettre en place sur votre plateau.</p> | [
"3d",
"puzzle",
"grillon"
] | Toys & Games > Puzzles & Brain-teasers | [
"393332/images/image_1_compressed.jpg",
"393332/images/image_2_compressed.jpg",
"393332/images/image_3_compressed.jpg"
] | [
"393332/stls/Grillon v1.stl"
] | CC0 | https://www.printables.com/model/393332 | data_0042.tar |
73075 | Cricut Maker Tool Holder (Middle Part) | <p> I like keeping my xacto knife and other pens in the larger side and I didn't have that many tools so I made it to fit the middle part. hope this is useful to some.</p> | [
"organizer",
"toolorganizer",
"cricut",
"cricutmaker"
] | Hobby & Makers > Organizers | [
"73075/images/image_1_compressed.jpg"
] | [
"73075/stls/Cricut organizer.stl"
] | CC0 | https://www.printables.com/model/73075 | data_0042.tar |
299521 | Cricut Maker Tray Extension | <p>I was getting frustrated with my mat constantly flopping onto the floor before/after cuts, so I made these extensions to bump out the tray just enough to support a standard 12x12 cutting mat.</p><p>You can print and many or as wide of clips as you'd prefer. I have two at 15mm wide which is more than sufficient, but ... | [
"thingiverse",
"cricut",
"cricutmaker",
"cricutaccessories"
] | Hobby & Makers > Tools | [
"299521/images/image_1_compressed.jpg",
"299521/images/image_2_compressed.jpg",
"299521/images/image_3_compressed.jpg",
"299521/images/image_4_compressed.jpg"
] | [
"299521/stls/CricutTrayExtention.stl"
] | CC-BY | https://www.printables.com/model/299521 | data_0042.tar |
161644 | Crimp pocket - Climbing hold | <p>This is a very shallow half-pocket. Its open on the top but the grip is very pocket-like. Its quite shallow and hard to use, you could probably get both hands on it with 2 fingers from each</p>
<p>
<figure class="media">
<oembed url="https://www.youtube.com/watch?v=EY-NxW1e40g"></oembed>
</figure>
</p>
Category: S... | [
"hold",
"grips",
"thingiverse",
"climbing",
"holds"
] | Sports & Outdoor > Outdoor Sports | [
"161644/images/image_1_compressed.jpg"
] | [
"161644/stls/Hand_evil_semipocket.stl"
] | CC-BY | https://www.printables.com/model/161644 | data_0042.tar |
1386518 | CROC TOES | <h3><strong>CROC TOES</strong></h3> | [] | Fashion > Other Fashion Accessories | [
"1386518/images/image_1_compressed.jpg"
] | [
"1386518/stls/CROC TOES.stl"
] | CC0 | https://www.printables.com/model/1386518 | data_0042.tar |
1299313 | Crochet Marker with Latch | <p>I modified the original STL using Microsoft 3D builder included in Windows 10.</p><p>Print in PETG, .20mm is fine, no supports, resizes pretty well.</p><p>Category: Hobby</p> | [
"marker",
"thingiverse",
"stitch",
"crochet"
] | Hobby & Makers > Tools | [
"1299313/images/image_1_compressed.jpg",
"1299313/images/image_2_compressed.jpg",
"1299313/images/image_3_compressed.jpg",
"1299313/images/image_4_compressed.jpg",
"1299313/images/image_5_compressed.jpg"
] | [
"1299313/stls/marker_size_3_remixed.stl"
] | CC-BY | https://www.printables.com/model/1299313 | data_0042.tar |
205775 | Crochet porte serviettes | [] | Household > Bathroom | [
"205775/images/image_1_compressed.jpg"
] | [
"205775/stls/Crochet porte serviettes v1.stl"
] | CC0 | https://www.printables.com/model/205775 | data_0042.tar | |
255434 | Crock Pot Knob |
<p>Stumbled onto a second hand Bella 3 station Crock pot buffet server, however it was missing the knobs. So I drew this up based on a different crock pot knob we had. A test print to confirm dimensions and I discovered the indicator dot was not lining up just right, so I tweaked the design a bit to get a better ali... | [
"kitchen",
"knob",
"thingiverse",
"potentiometerknob",
"crockpot",
"bella"
] | Household > Kitchen | [
"255434/images/image_1_compressed.jpg",
"255434/images/image_2_compressed.jpg",
"255434/images/image_3_compressed.jpg",
"255434/images/image_4_compressed.jpg",
"255434/images/image_5_compressed.jpg",
"255434/images/image_6_compressed.jpg"
] | [
"255434/stls/crockpot_knob.stl"
] | CC-BY | https://www.printables.com/model/255434 | data_0042.tar |
476955 | Crocodile | <p>Just print me or I come to your house and eat you.</p> | [] | Toys & Games > Action Figures & Statues | [
"476955/images/image_1_compressed.jpg"
] | [
"476955/stls/Crocodile.stl"
] | CC0 | https://www.printables.com/model/476955 | data_0042.tar |
849585 | Crocodile - inserting puzzle for kids | <p>The crocodile insert puzzle is for improving children's motor skills. The parts are inserted into the insertion pad in order from number one to number 10.<br>The edges of the individual parts are beveled, the insert pad has rounded edges.</p> | [
"puzzle",
"kids",
"crocodile",
"insert"
] | Toys & Games > Puzzles & Brain-teasers | [
"849585/images/image_1_compressed.jpg",
"849585/images/image_2_compressed.jpg",
"849585/images/image_3_compressed.jpg"
] | [
"849585/stls/01_obj.stl",
"849585/stls/02_obj.stl",
"849585/stls/03_obj.stl",
"849585/stls/04_obj.stl",
"849585/stls/05_obj.stl",
"849585/stls/06_obj.stl",
"849585/stls/07_obj.stl",
"849585/stls/08_obj.stl",
"849585/stls/09_obj.stl",
"849585/stls/10_obj.stl",
"849585/stls/insert_pad.stl"
] | CC0 | https://www.printables.com/model/849585 | data_0042.tar |
331860 | Crocs Pins Marvel | <p>100% infill</p><p>Support needed.</p> | [] | Fashion > Other Fashion Accessories | [
"331860/images/image_1_compressed.jpg",
"331860/images/image_2_compressed.jpg",
"331860/images/image_3_compressed.jpg"
] | [
"331860/stls/Av.stl",
"331860/stls/CA.stl",
"331860/stls/IM.stl",
"331860/stls/Sh.stl",
"331860/stls/SP.stl",
"331860/stls/Th.stl"
] | CC0 | https://www.printables.com/model/331860 | data_0042.tar |
150523 | crosed helical gear | [
"spinner",
"fidget",
"fidgettoy",
"gear",
"gears",
"gadget",
"gadgets",
"helical",
"crosed"
] | Gadgets > Other Gadgets | [
"150523/images/image_1_compressed.jpg",
"150523/images/image_2_compressed.jpg",
"150523/images/image_3_compressed.jpg",
"150523/images/image_4_compressed.jpg",
"150523/images/image_5_compressed.jpg"
] | [
"150523/stls/body.stl",
"150523/stls/helical gear -assembled.stl",
"150523/stls/helical gear.stl",
"150523/stls/shaft.stl"
] | CC0 | https://www.printables.com/model/150523 | data_0042.tar | |
209327 | Crossed Helix Flowing Sculpture With Stand | [
"spiral",
"helix"
] | Art & Design > Other Art & Designs | [
"209327/images/image_1_compressed.jpg"
] | [
"209327/stls/spiral-block.stl"
] | CC0 | https://www.printables.com/model/209327 | data_0042.tar | |
72428 | Crown of Thorns Cross | <p>.3mf and g-code both include color change.</p> | [
"cross",
"christian",
"religious"
] | Art & Design > Sculptures | [
"72428/images/image_1_compressed.jpg",
"72428/images/image_2_compressed.jpg"
] | [
"72428/stls/crossCrownThorns.stl",
"72428/stls/crossThorns.stl"
] | CC0 | https://www.printables.com/model/72428 | data_0042.tar |
397475 | CRTouch_Case | <p>Broken CRTouch case due to dive? Print a new one :D</p><p><strong>NO SUPPORT NEEDED!</strong></p><p><strong>Material:</strong> PLA /0.4mm nozzle</p> | [
"crtouch"
] | 3D Printers > Other Printer Parts & Upgrades | [
"397475/images/image_1_compressed.jpg",
"397475/images/image_2_compressed.jpg",
"397475/images/image_3_compressed.jpg",
"397475/images/image_4_compressed.jpg"
] | [
"397475/stls/CRTouch_Case1.stl",
"397475/stls/CRTouch_Case2.stl"
] | CC-BY | https://www.printables.com/model/397475 | data_0042.tar |
284188 | Crusader Pepe | <p>It's a crusader Pepe the frog</p> | [
"frog",
"figurine",
"crusader",
"knight",
"pepe"
] | Toys & Games > Action Figures & Statues | [
"284188/images/image_1_compressed.jpg",
"284188/images/image_2_compressed.jpg"
] | [
"284188/stls/Crusader_Pepe_ArmL.stl",
"284188/stls/Crusader_Pepe_ArmR.stl",
"284188/stls/Crusader_Pepe_Body.stl",
"284188/stls/Crusader_Pepe_Crown.stl",
"284188/stls/Crusader_Pepe_Head.stl"
] | CC0 | https://www.printables.com/model/284188 | data_0042.tar |
5594 | Cube - basic geometric shape | <p>Cube with edge length a = 100 mm</p>
| [
"cube",
"basicshape"
] | 3D Printers > Test Models | [
"5594/images/image_1_compressed.jpg"
] | [
"5594/stls/cube100.stl"
] | CC0 | https://www.printables.com/model/5594 | data_0042.tar |
243362 | Cube Box | <p>JUst a very very simple model :) </p><p>Have fun printing! easy to make!</p> | [
"box",
"small",
"test",
"cube",
"speed",
"easytoprint",
"easy",
"quickprint",
"quick",
"follow",
"testprint",
"easyprint",
"simple",
"make",
"makeit",
"simpleprint",
"quickmake"
] | 3D Printers > Test Models | [
"243362/images/image_1_compressed.jpg"
] | [
"243362/stls/Box.stl"
] | CC-BY | https://www.printables.com/model/243362 | data_0042.tar |
891198 | Cube Burr Puzzle 1 | <p>Gap 0.1mm worked well with an MK4</p> | [] | Toys & Games > Puzzles & Brain-teasers | [
"891198/images/image_1_compressed.jpg",
"891198/images/image_2_compressed.jpg",
"891198/images/image_3_compressed.jpg"
] | [
"891198/stls/cube4_3p_11m_gap0.1mm.stl",
"891198/stls/cube4_3p_11m_gap0.2mm.stl",
"891198/stls/cube4_3p_11m_gap0.3mm.stl"
] | CC0 | https://www.printables.com/model/891198 | data_0042.tar |
454988 | Cube Holder | <p>Have you seen thise CMY Cube? this is a veeeery simple model for holding it at 45°</p> | [
"holder",
"cube",
"cmy"
] | Art & Design > Other Art & Designs | [
"454988/images/image_1_compressed.jpg",
"454988/images/image_2_compressed.jpg"
] | [
"454988/stls/Cube Holder.stl"
] | CC0 | https://www.printables.com/model/454988 | data_0042.tar |
349936 | Cube Joint Collection | <p>This collection includes 8 different 90° Cube Joint configurations to cover virtually every type of connection you’ll need for your builds.</p><p><strong>What’s Included:</strong></p><ul><li><strong>Corner Cube:</strong> The core component for making your cube projects truly cube-ish.</li><li><strong>Flush Square:</... | [
"cube",
"square",
"makerig"
] | Hobby & Makers > Mechanical Parts | [
"349936/images/image_1_compressed.jpg",
"349936/images/image_2_compressed.jpg",
"349936/images/image_3_compressed.jpg",
"349936/images/image_4_compressed.jpg",
"349936/images/image_5_compressed.jpg",
"349936/images/image_6_compressed.jpg",
"349936/images/image_7_compressed.jpg",
"349936/images/image_8... | [
"349936/stls/joint-bottom-center-cube v3.stl",
"349936/stls/joint-bottom-edge-cube v1.stl",
"349936/stls/joint-end-cube v2.stl",
"349936/stls/joint-end-cube-flush v2.stl",
"349936/stls/joint-end-square v3.stl",
"349936/stls/joint-middle-center-cube v2.stl",
"349936/stls/joint-through-center v2.stl",
"... | CC-BY | https://www.printables.com/model/349936 | data_0042.tar |
587913 | Cube Test 20mm x 20mm | <p>Cube Test 20mm x 20mm</p> | [
"cube",
"voron",
"testcube"
] | 3D Printers > Test Models | [
"587913/images/image_1_compressed.jpg"
] | [
"587913/stls/xyz_test_cube.stl"
] | GPL3.0 | https://www.printables.com/model/587913 | data_0042.tar |
833005 | Cuboid, The articulated. A articulated dragon/thing | <p>Cuboid is very intresting and likes to wiggle(because it can).It takes about 3hours to print at 100% size+15%infill. Cuboid likes to be downloded :)Other versions in the "All The Oids" collection</p><p> </p><p><strong>Cuboid Cubed:</strong></p><p>A helthy, happy and, normal cuboid. Its very ... | [
"fast",
"printinplace",
"cool"
] | Tabletop Miniatures > Characters & Monsters | [
"833005/images/image_1_compressed.jpg",
"833005/images/image_2_compressed.jpg",
"833005/images/image_3_compressed.jpg",
"833005/images/image_4_compressed.jpg"
] | [
"833005/stls/Cuboid Cubed.stl",
"833005/stls/Cuboid Food.stl",
"833005/stls/Cuboid Spikey.stl"
] | CC-BY | https://www.printables.com/model/833005 | data_0042.tar |
860224 | Cuelga espatulas | <p>Cuelga espátulas, gracias a la ayuda de @rioseras007</p> | [
"espatula"
] | Hobby & Makers > Tools | [
"860224/images/image_1_compressed.jpg"
] | [
"860224/stls/colgador espatula.stl",
"860224/stls/colgador espatula_con_texto.stl"
] | CC-BY | https://www.printables.com/model/860224 | data_0042.tar |
533928 | Cult of The Lamb - Lambert Statue | Praise The Lamb | Download free 3D printable STL models | [
"cult",
"lamb"
] | Gadgets > Video Games | [
"533928/images/image_1_compressed.jpg"
] | [
"533928/stls/lamb_stand.stl",
"533928/stls/lamb_stand_supports.stl",
"533928/stls/lamb_stand_supports_small.stl"
] | CC0 | https://www.printables.com/model/533928 | data_0042.tar |
120911 | Cup holder for BMW | <p>This is an cupholder that's made for an BMW E60/E61. Its made to slip over the center console and the cupholder itself can be removed easily if needed. You'll need to remove the bottom trim panel on the center console when mounting it, and slip it back over once its screwd in</p> | [
"cupholder"
] | Hobby & Makers > Automotive | [
"120911/images/image_1_compressed.jpg",
"120911/images/image_2_compressed.jpg",
"120911/images/image_3_compressed.jpg",
"120911/images/image_4_compressed.jpg"
] | [
"120911/stls/Universal holder E6x v8.stl",
"120911/stls/Universal mount cup holder v9.stl"
] | CC0 | https://www.printables.com/model/120911 | data_0042.tar |
970244 | Curaprox interdental brush wall holder | <p>Ergonoic wall mounted holder for 3 Curaprox interdental toothbrushes.<br><br>Mount using doublesided tape<br><br>Brushes are easy to remove from holder by pushing on the top part of the brush.</p><p> </p> | [
"wallmounted",
"toothbrushholder",
"dental",
"dentalhygiene",
"doublesidedtape",
"dentalcare"
] | Household > Bathroom | [
"970244/images/image_1_compressed.jpg",
"970244/images/image_2_compressed.jpg"
] | [
"970244/stls/holder_v1.stl"
] | CC-BY | https://www.printables.com/model/970244 | data_0042.tar |
937214 | Curtain hanger | [] | 3D Printers > Accessories | [
"937214/images/image_1_compressed.jpg"
] | [
"937214/stls/Akaztó.stl"
] | CC-BY | https://www.printables.com/model/937214 | data_0042.tar | |
1045209 | Curtain Hanger Hooks | [] | Household > Home Decor | [
"1045209/images/image_1_compressed.jpg"
] | [
"1045209/stls/CurtainHangerHook.stl"
] | CC-BY | https://www.printables.com/model/1045209 | data_0042.tar | |
893770 | Curtain hook - curtain holder | <p>Simple model yet working quite well </p> | [
"curtain",
"curtainhook",
"curtainholder"
] | Household > Home Decor | [
"893770/images/image_1_compressed.jpg",
"893770/images/image_2_compressed.jpg"
] | [
"893770/stls/hook.stl",
"893770/stls/hook_mirror.stl"
] | CC-BY | https://www.printables.com/model/893770 | data_0042.tar |
595476 | Curtain Hook w/ Hidden Command Strip | <p>Simple curtain wall hook that mounts to the wall by a command strip. The removal tab is hidden but accessible for unmounting.</p><p>Model is for a medium <strong>70mm x 18.5 mm</strong> (2.75in x 0.73in) command strip. Fusion 360 file is included if you need to adjust anything :)</p><p>Printing notes:<br>- Model con... | [
"wall",
"hook",
"household",
"mount",
"strip",
"shade",
"quick",
"clean",
"command",
"curtains",
"curtain",
"simple",
"mountable",
"shades"
] | Household > Home Decor | [
"595476/images/image_1_compressed.jpg",
"595476/images/image_2_compressed.jpg",
"595476/images/image_3_compressed.jpg"
] | [
"595476/stls/CurtainHook.stl"
] | CC-BY | https://www.printables.com/model/595476 | data_0042.tar |
123460 | Curtain wall hook |
<p>Wanted to create nicely printable hook for curtains - so this is it</p>
<p>Just add 2 screws and your are ready to go!</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>I3 MK3S</p></div><strong>Rafts:</strong></... | [
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"123460/images/image_1_compressed.jpg",
"123460/images/image_2_compressed.jpg",
"123460/images/image_3_compressed.jpg"
] | [
"123460/stls/wall_hook.stl"
] | CC-BY | https://www.printables.com/model/123460 | data_0042.tar |
269169 | Curtain wavy parametric flower vase | [
"vase",
"pot",
"parametric",
"decoration",
"light",
"planter",
"organic",
"wave",
"garden",
"easytoprint",
"abs",
"easy",
"quickprint",
"abstract",
"pencilpot",
"plantpot",
"vasemode",
"quick",
"vases",
"flowerpot",
"fastprint",
"indoor",
"flowervase",
"airflow",
"eas... | Household > Outdoor & Garden | [
"269169/images/image_1_compressed.jpg"
] | [
"269169/stls/Vase_test_3.stl"
] | CC-BY | https://www.printables.com/model/269169 | data_0042.tar | |
495296 | Curve based vases | <p>Print in vase mode. </p><p>Use a low layer height so the curves are smooth and there is no holes. </p><p>If printed with fuzzy skin at 0.1ish thickness and 0.5ish point distance the vertical seam is less visible. </p> | [
"vase",
"decoration",
"design",
"home",
"vasemode"
] | Household > Home Decor | [
"495296/images/image_1_compressed.jpg",
"495296/images/image_2_compressed.jpg",
"495296/images/image_3_compressed.jpg"
] | [
"495296/stls/v1.stl",
"495296/stls/v2.stl",
"495296/stls/v3.stl",
"495296/stls/v4.stl",
"495296/stls/v5.stl"
] | CC0 | https://www.printables.com/model/495296 | data_0042.tar |
557517 | Curvy Pot with Integrated Drain Tray | <p>This beautiful curvy pot prints-in-place with the drain tray attached and ready for planting. The model includes a series of hidden channels beneath the plant that allow the water to drain out to the outer portion of the tray, where you can conveniently see the water collecting to help ensure you don't over-water.</... | [
"pot",
"plant",
"planter",
"potter",
"flowerpot",
"plants",
"planters",
"planterpot",
"plantpots",
"pottery",
"flowerplanter",
"pots",
"flowerpots",
"planterpots",
"potplant",
"potplants",
"potplanters",
"potplanter"
] | Household > Home Decor | [
"557517/images/image_1_compressed.jpg",
"557517/images/image_2_compressed.jpg",
"557517/images/image_3_compressed.jpg",
"557517/images/image_4_compressed.jpg",
"557517/images/image_5_compressed.jpg",
"557517/images/image_6_compressed.jpg",
"557517/images/image_7_compressed.jpg"
] | [
"557517/stls/Curvy Pot.stl"
] | CC-BY | https://www.printables.com/model/557517 | data_0042.tar |
420403 | Custom Christmas Ornament | <p>Very quick print, I suggest painting it after to give some extra flair</p> | [
"christmas",
"gift",
"ornament"
] | Seasonal designs > Winter & Christmas & New Year's | [
"420403/images/image_1_compressed.jpg"
] | [
"420403/stls/Christmas ornament.stl"
] | CC-BY | https://www.printables.com/model/420403 | data_0042.tar |
443775 | Custom Dog Tag | <p>You can now customize text on any flat or curved surface in the latest Prusa slicer, although it is still pre-formal release. It does work well. So, add your telephone, name, dog's name, and/or your phone number to the tag. For detailed information on how to do this, search for “How to add test to ... | [
"dogtag",
"youcustomizedogtag",
"dogtagcustom",
"dogtagcustomizedbyyou"
] | Household > Pets | [
"443775/images/image_1_compressed.jpg"
] | [
"443775/stls/6H-DogBonePawCustom-v12.stl"
] | CC-BY | https://www.printables.com/model/443775 | data_0042.tar |
336642 | Custom Duplo Train Track Connector | <p>A thin 4x2 plate with only the outer 4 cyclindric connectors, designed to hold two Duplo train tracks together.</p><p>The 2nd example pictures shows how this model connects <a href="https://www.printables.com/model/73798-lego-duplo-train-track-ramp-v2/">https://www.printables.com/model/73798-lego-duplo-train-track-r... | [
"duplo",
"legocompatible",
"duplocompatible",
"legoduplotrain"
] | Toys & Games > Building Toys | [
"336642/images/image_1_compressed.jpg",
"336642/images/image_2_compressed.jpg"
] | [
"336642/stls/Duplo Train Connector.stl",
"336642/stls/DuploTrainConnector.stl"
] | CC-BY | https://www.printables.com/model/336642 | data_0042.tar |
256836 | custom name dog or cat bowl | <p>This is a dog bowl or cat bowl with a name of your choice. I printed it for my kids to play with their stuffed dogs. If you want to use this as a real bowl, pay attention to the datasheet of your filament. I recommend 3 outer lines and at least 5 solid top layers.</p><p>At first I did this in Fusion 360, but my lice... | [
"thingiverse"
] | Household > Pets | [
"256836/images/image_1_compressed.jpg",
"256836/images/image_2_compressed.jpg"
] | [
"256836/stls/napf_filled.stl",
"256836/stls/napf_not_filled.stl"
] | CC-BY | https://www.printables.com/model/256836 | data_0042.tar |
409383 | custom PTFE plug 4mm | <p>cute custom ptfe plug for your custom filament box. its the 4mm version. make sure your printer is properly calibrated as this is snug fit.</p> | [
"ptfe",
"plugs"
] | 3D Printers > Other Printer Parts & Upgrades | [
"409383/images/image_1_compressed.jpg"
] | [
"409383/stls/ptfe plug.stl"
] | CC-BY | https://www.printables.com/model/409383 | data_0042.tar |
976018 | Custom sprite housing extruder with integrated toolhead and runout sensor | <p>2 different models according your need runout sensor or not.<br>Filament sensor after gear is used for MMU<br><br>Designed for fysetec gear.</p><p>Please note that it has not been tested yet by myself</p><p>Parts needed:</p><p>-1x 4mm steel ball<br>-1x microswitch<br>-2x 2x10mm selftaping screw<br>-fysetec upgraded ... | [
"extruder",
"mmu",
"creality",
"sensor",
"filamentsensor",
"ender3",
"runout",
"sprite",
"runoutsensor",
"fysetc",
"toolhead",
"ender3v2",
"ercf",
"ender3s1",
"ender3s1pro",
"ender5s1",
"ender3v3se",
"ender3v3ke",
"ercfv2"
] | 3D Printers > Creality Parts & Upgrades | [
"976018/images/image_1_compressed.jpg",
"976018/images/image_2_compressed.jpg",
"976018/images/image_3_compressed.jpg",
"976018/images/image_4_compressed.jpg",
"976018/images/image_5_compressed.jpg"
] | [
"976018/stls/back_housing.stl",
"976018/stls/cover_for_runout_sensor.stl",
"976018/stls/front_housing_toolhead+runoutSensor.stl",
"976018/stls/front_housing_toolheadonly.stl"
] | CC-BY | https://www.printables.com/model/976018 | data_0042.tar |
269168 | Custom Stamp with Exchangeable Text | <p>And again a simple, customizable OpenSCAD design. This time it's a two component stamp, a generic handle part and an interchangeable rubber part; no gluing necessary, simply print one or more texts and switch them around as you like.</p><h3>Updates / News</h3><ul><li><strong>2018-12-04: v1.2</strong><ul><li>Add new ... | [
"office",
"tpu",
"openscad",
"customized",
"stamp"
] | Household > Office | [
"269168/images/image_1_compressed.jpg",
"269168/images/image_2_compressed.jpg",
"269168/images/image_3_compressed.jpg",
"269168/images/image_4_compressed.jpg"
] | [
"269168/stls/Stamp 1 Bezier Full - Top Secret.stl",
"269168/stls/Stamp 1 Bezier Handle.stl",
"269168/stls/Stamp 1 Rubber - Love 4mm.stl",
"269168/stls/Stamp 1 Rubber - Top Secret.stl",
"269168/stls/Stamp 1 Rubber Blank 4mm.stl",
"269168/stls/Stamp 1 Rubber Blank with Border.stl",
"269168/stls/Stamp 1 Ru... | CC-BY | https://www.printables.com/model/269168 | data_0042.tar |
266053 | Custom Wax Seal Stamps | <p>Various base models including stamp heads, screw-on attachment to <a href="https://www.amazon.com/gp/product/B081R1FDNB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1">preexisting seal handles</a>, long handle and knob versions. Import your SVG/model/other design into the face of one of the stamp heads and cut ... | [
"letter",
"dnd",
"vintage",
"dungeonsanddragons",
"seal",
"customize",
"stamp",
"dndprops",
"wax",
"envelope"
] | Hobby & Makers > Tools | [
"266053/images/image_1_compressed.jpg",
"266053/images/image_2_compressed.jpg",
"266053/images/image_3_compressed.jpg"
] | [
"266053/stls/Blank.stl",
"266053/stls/Blank_groove.stl",
"266053/stls/D&D_Strixhaven.stl",
"266053/stls/rose-stamp.stl",
"266053/stls/stamp blank.stl",
"266053/stls/stamp.stl",
"266053/stls/stamp_groove.stl",
"266053/stls/stamp_handle.stl",
"266053/stls/stamp_knob.stl",
"266053/stls/stamp_knob_bla... | CC-BY | https://www.printables.com/model/266053 | data_0042.tar |
2203 | Customisable Heat Tower with Bridges | <p>Combination for customisable heat tower and tower with bridges.</p>
<p>Just open SCAD file, modify labels you want have there and export it to stl with OpenSCAD.</p>
<p>To change temps, you can use something like this in slic3r, in priter settings, custom GCODE, After layer change:</p>
<pre><code class="lang-gcode">... | [
"test",
"tower",
"temperature",
"heat"
] | 3D Printers > Test Models | [
"2203/images/image_1_compressed.jpg"
] | [
"2203/stls/heat_tower-bridge-220-190.stl"
] | CC-BY | https://www.printables.com/model/2203 | data_0042.tar |
302219 | Customisable Stamp / Seal Stamp | <p>I created a stamp handle, and a paw stamp. For the stamp handle, the material with which it is printed does not matter. For the stamp itself, it is important that it is printed with TPU. After that I sanded it a bit with rough sandpaper, so that the stamp works better. <br>Assembling is quite simple, just glue ... | [
"rubberstamp",
"stamp",
"stamps",
"rubberstamps",
"inkstamps"
] | Household > Office | [
"302219/images/image_1_compressed.jpg",
"302219/images/image_2_compressed.jpg",
"302219/images/image_3_compressed.jpg",
"302219/images/image_4_compressed.jpg",
"302219/images/image_5_compressed.jpg",
"302219/images/image_6_compressed.jpg"
] | [
"302219/stls/SmileyStamp.stl",
"302219/stls/StampBlank.stl",
"302219/stls/StampHandle.stl",
"302219/stls/StampPaw.stl"
] | GPL2.0 | https://www.printables.com/model/302219 | data_0042.tar |
188755 | Customizable 3D printer support test |
<p>This is a customizable 3D printer support test. To change dimensions click on the Open In Customizer button here.</p>
<p>You can test both support from from build platform and support from material.</p>
<p>EDIT: Chuck CHEP Hellebuyck published a video on Cura support settings that uses this thing. <a href="https:... | [
"test",
"support",
"thingiverse",
"customized"
] | 3D Printers > Test Models | [
"188755/images/image_1_compressed.jpg",
"188755/images/image_2_compressed.jpg",
"188755/images/image_3_compressed.jpg"
] | [
"188755/stls/support_test.stl",
"188755/stls/support_test_low.stl"
] | CC0 | https://www.printables.com/model/188755 | data_0042.tar |
380772 | Customizable 3D QR Code generator | <h3>STL QR Code generator</h3><p><br>This project lets you design and create customized QR Codes and download them in STL format without the need to download additional tools.</p><h4>New Features</h4><p><strong>Stands</strong><br>There is now an option to include stands in the downloaded file.</p><p><strong>3MF format<... | [
"customizable",
"qrcode",
"fridgemagnet"
] | Art & Design > 2D Plates & Logos | [
"380772/images/image_1_compressed.jpg",
"380772/images/image_2_compressed.jpg",
"380772/images/image_3_compressed.jpg",
"380772/images/image_4_compressed.jpg"
] | [
"380772/stls/3mf-qrcode.stl",
"380772/stls/basic.stl",
"380772/stls/custom_qr_code.stl",
"380772/stls/custom_wifi_qr_code.stl",
"380772/stls/qrcode_with_base.stl",
"380772/stls/qrcode_with_magnet_holes.stl",
"380772/stls/stand1.stl",
"380772/stls/stand2.stl",
"380772/stls/stand3.stl"
] | CC0 | https://www.printables.com/model/380772 | data_0042.tar |
82739 | Customizable bed leveling pattern | <p>The dimensions specified by the print pattern should be somewhat smaller than the dimensions of the bed</p><p> </p><p>The sample pattern is 200x200 test pattern was printed on 210x210 bed</p><p>Use OpenScad to generate stl file of any shape.</p><p>Modify the following parameters for calibration_pattern fu... | [
"openscad",
"bedlevel",
"bedleveling",
"bedleveltest",
"bedlevelcalibration",
"meshbedleveling"
] | 3D Printers > Test Models | [
"82739/images/image_1_compressed.jpg",
"82739/images/image_2_compressed.jpg"
] | [
"82739/stls/calibration_pattern_200x200x0.2.stl",
"82739/stls/calibration_pattern_240x200x0.2.stl"
] | GPL2.0 | https://www.printables.com/model/82739 | data_0042.tar |
60218 | Customizable Blokus Piece | <p>My family had a Blokus set missing a piece. Someone else thought I might be able to 3d print a replacement, which I can. I thought it was really cool that someone else thought of that though.</p>
<p>I found some pieces on thingiverse, but they were a different style, and measuring them, they were slightly smaller th... | [
"thingiverse",
"blockus",
"blokus"
] | Toys & Games > Board Games | [
"60218/images/image_1_compressed.jpg",
"60218/images/image_2_compressed.jpg",
"60218/images/image_3_compressed.jpg",
"60218/images/image_4_compressed.jpg"
] | [
"60218/stls/blockus_piece.stl"
] | CC-BY | https://www.printables.com/model/60218 | data_0042.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.