model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
1608016 | EasyThreed K10 Re-Imagined | <p>So... I did a thing... </p><p>I was kind of bored with the minor tweaks and upgrades for the K10 I was making and I decided to modify it to be "Core XY" (not really, but bear with me) vs. original bed slinger style. </p><p>What I did was to model pretty much everything from sratch.<br><br><br></p><figure class="imag... | [
"easythreed",
"k10",
"easythreedk10"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1608016/images/image_1_compressed.jpg",
"1608016/images/image_2_compressed.jpg"
] | [
"1608016/stls/K10 Re-Imagined 1 Columns.stl",
"1608016/stls/K10 Re-Imagined Base Improved.stl",
"1608016/stls/K10 Re-Imagined X axis End Bracket.stl",
"1608016/stls/K10 Re-Imagined X axis Motor Bracket with Cable Guard.stl",
"1608016/stls/K10 Re-Imagined Y Axis Mount with Cable Guard.stl",
"1608016/stls/K... | CC-BY | https://www.printables.com/model/1608016 | data_0043.tar |
342158 | Easythreed K7 Thumb Nut Grip Cap |
<p>The Easythreed X Series Thumb Nut Grip Cap by takashio has been 1 mm to large for my NantFun Mini / Easythreed K7</p>
Category: 3D Printer Parts
| [
"thingiverse"
] | 3D Printers > Other Printer Parts & Upgrades | [
"342158/images/image_1_compressed.jpg"
] | [
"342158/stls/level_table_cogs.k7.stl"
] | CC-BY | https://www.printables.com/model/342158 | data_0043.tar |
1000044 | EC11 Encoder Knob | <p>An Encoder knob for the EC11 D shaft & Plum shaft. Has a slight radius on the top, and vertical knurling on the sides. Designed for 15mm D shaft and 15mm Plum shaft, however will work with 20mm shaft also.</p><p>Height = 15.5mm<br>Diameter = 16.25mm</p><p>Pictured Knobs printed with PLA on Bambu X1C.</p><ul><li>... | [
"knob",
"keycap",
"keyboard",
"encoder",
"ergonomic",
"ec11"
] | Hobby & Makers > Electronics | [
"1000044/images/image_1_compressed.jpg",
"1000044/images/image_2_compressed.jpg",
"1000044/images/image_3_compressed.jpg",
"1000044/images/image_4_compressed.jpg"
] | [] | GPL2.0 | https://www.printables.com/model/1000044 | data_0043.tar |
1743516 | ECAS04 adapters for Flashforge AD5X IFS tubing | <p><strong>I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: </strong><a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.printables.com/@ninjamid... | [
"filament",
"clip",
"adapter",
"ptfe",
"bowden",
"collet",
"fitting",
"ifs",
"ecas",
"ad5x"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1743516/images/image_1_compressed.jpg",
"1743516/images/image_2_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/1743516 | data_0043.tar |
497481 | Echo Dot Generation (100mm diameter) Foot Bracket | <p>Echo Dot 4 Generation (100 mm diameter)</p>
<p>Fasten with double-sided adhesive tape approx. 1.5 mm thick (two to four layers) in the middle.</p>
<h3>Print Settings</h3>
<p><strong>Supports:</strong></p>
<p>No</p>
<p class="detail-setting resolution"><strong>Resolution: </strong>
<div><p>0,12 - 0,16</p></div>
<p><s... | [
"thingiverse"
] | Household > Other House Equipment | [
"497481/images/image_1_compressed.jpg",
"497481/images/image_2_compressed.jpg",
"497481/images/image_3_compressed.jpg"
] | [
"497481/stls/Echo_Dot_4_Foot_Generation.stl"
] | CC-BY | https://www.printables.com/model/497481 | data_0043.tar |
479863 | Echo show 5 stand | <p>this stand uses less filament than other stands but keeps the original tilt.</p><p>iv used 15% lightning infill with no bottom layer to save filament</p><p>if ur curious iv used X3D glitter filament.</p><p>https://x3d.com.au/products/glitter-pla-1-75mm?variant=35439291564187 </p> | [
"alexa",
"echo",
"echoshow"
] | 3D Printers > Accessories | [
"479863/images/image_1_compressed.jpg",
"479863/images/image_2_compressed.jpg",
"479863/images/image_3_compressed.jpg"
] | [
"479863/stls/Echo_show_5_stand.stl"
] | CC-BY | https://www.printables.com/model/479863 | data_0043.tar |
392368 | Echo the bat | <p>Cute bat. Print the normal version with a filament change, or print the MMU model with a MMU. Both STL and STEP files included.<br>Cover photo with Makerbot glow in the dark ABS, regular black ABS and blacklight illumination.</p> | [
"mmu",
"bat",
"glowinthedark"
] | Household > Home Decor | [
"392368/images/image_1_compressed.jpg",
"392368/images/image_2_compressed.jpg",
"392368/images/image_3_compressed.jpg",
"392368/images/image_4_compressed.jpg",
"392368/images/image_5_compressed.jpg"
] | [
"392368/stls/EchoTheBat-MMU.stl",
"392368/stls/EchoTheBat.stl"
] | CC-BY | https://www.printables.com/model/392368 | data_0043.tar |
830500 | Eclipse 2024 pinhole projector | [] | Art & Design > Other Art & Designs | [
"830500/images/image_1_compressed.jpg",
"830500/images/image_2_compressed.jpg",
"830500/images/image_3_compressed.jpg"
] | [
"830500/stls/Eclipse2024.stl"
] | CC-BY | https://www.printables.com/model/830500 | data_0043.tar | |
80982 | Ecovacs Deebot Auto-Empty Station - Duct Plug |
<p>I love our Ecovacs Deebot N8 Pro with Auto-Empty Station as it's great for cleaning up our dog's hair that they are constantly shedding. However, I noticed that frequently the debris it picked up would not be removed from the bin by the Auto-Empty Station. Instead, it would be sitting perfectly centred in the middl... | [
"thingiverse",
"deebot",
"ecovacs"
] | Household > Other House Equipment | [
"80982/images/image_1_compressed.jpg",
"80982/images/image_2_compressed.jpg",
"80982/images/image_3_compressed.jpg",
"80982/images/image_4_compressed.jpg",
"80982/images/image_5_compressed.jpg"
] | [
"80982/stls/Plug.stl"
] | CC-BY | https://www.printables.com/model/80982 | data_0043.tar |
999678 | ED printed fabric | <p><br>Highly optimized fabric structure that allows printing on conventional FDM printers</p> | [
"fabric"
] | Art & Design > Other Art & Designs | [
"999678/images/image_1_compressed.jpg"
] | [
"999678/stls/Sample 34x4.stl",
"999678/stls/Sample 3x2.stl",
"999678/stls/Sample 7x5.stl",
"999678/stls/Sample Batman.stl",
"999678/stls/Sample Circle 15x15.stl"
] | CC0 | https://www.printables.com/model/999678 | data_0043.tar |
1505324 | Eddie (Iron Maiden) | [] | Art & Design > Sculptures | [
"1505324/images/image_1_compressed.jpg",
"1505324/images/image_2_compressed.jpg",
"1505324/images/image_3_compressed.jpg"
] | [
"1505324/stls/eddie base.stl",
"1505324/stls/eddie full.stl",
"1505324/stls/eddie.stl"
] | CC0 | https://www.printables.com/model/1505324 | data_0043.tar | |
1434201 | Eddie – Funko POP! figure, from Stranger Things | <p><strong>Usage:</strong></p><ul><li><p>Collectible decoration</p></li><li><p>Humorous gift or parody piece</p></li><li><p>Custom addition to a Funko Pop–style collection</p></li></ul><p><strong>Print Recommendations:</strong></p><ul><li><p>Suggested scale: ~1:18 (around 10 cm tall)</p></li><li><p>Print with supports ... | [
"stranger",
"things",
"strangerthings",
"eddie"
] | Tabletop Miniatures > Characters & Monsters | [
"1434201/images/image_1_compressed.jpg"
] | [
"1434201/stls/Eddie V2.stl",
"1434201/stls/Eddie.stl"
] | CC-BY | https://www.printables.com/model/1434201 | data_0043.tar |
161007 | Edelweiss | <p>The iconic edelweiss flower, logo recreated in 3D</p>
Category: Outdoor & Garden | [
"flower",
"garden",
"switzerland",
"thingiverse",
"edelweiss"
] | Household > Outdoor & Garden | [
"161007/images/image_1_compressed.jpg",
"161007/images/image_2_compressed.jpg",
"161007/images/image_3_compressed.jpg"
] | [
"161007/stls/edelweiss.stl",
"161007/stls/edelweiss_pot_lab.stl"
] | CC-BY | https://www.printables.com/model/161007 | data_0043.tar |
121954 | Editable LCD cover for Prusa MK3S+ | <p>Prusa only share STLs for the parts for the printer and STLs are really awkward to edit: you have to use things like tinkercad or openscad, which aren't ideal. I've managed to convert the LCD cover STL to a STEP file and removed the text on the front: it can be easily imported into your CAD application and edi... | [
"lcdmount"
] | 3D Printers > Accessories | [
"121954/images/image_1_compressed.jpg",
"121954/images/image_2_compressed.jpg",
"121954/images/image_3_compressed.jpg"
] | [] | GPL2.0 | https://www.printables.com/model/121954 | data_0043.tar |
1029836 | Educational Balance Scale | <p>The set includes three different weight sizes, offering a variety of interactive educational activities. This engaging model teaches the basics of weight measurement and balance in a playful way. </p><h4>Print instructions</h4><p><i>Common to all parts :</i></p><ul><li>Material : PLA</li><li>Nozzle : 0.4mm ... | [
"kids",
"scale",
"balance",
"education",
"learning",
"physics",
"weight",
"easyprint",
"scalemodel",
"supportfree"
] | Learning > Other 3D Objects for Learning | [
"1029836/images/image_1_compressed.jpg",
"1029836/images/image_2_compressed.jpg"
] | [
"1029836/stls/Base.stl",
"1029836/stls/Beam.stl",
"1029836/stls/Big_weight.stl",
"1029836/stls/Medium_weight.stl",
"1029836/stls/Small_weight.stl"
] | CC-BY | https://www.printables.com/model/1029836 | data_0043.tar |
1503716 | Educational Model of Iris | <h3>My Educational Mechanical Examples Series</h3><p>This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates.<br>You can find all models in the series in this collection => <a target="_blank" rel="ugc" class="editor-link" href="https://www.printables.com/@osamutake_3341417/collec... | [
"mechanism",
"education",
"iris"
] | Learning > Engineering | [
"1503716/images/image_1_compressed.jpg",
"1503716/images/image_2_compressed.jpg",
"1503716/images/image_3_compressed.jpg"
] | [
"1503716/stls/(OLD!!) Iris v80-printable.stl",
"1503716/stls/(Update Preview) Iris v137-pin with enlarged anchor disk.stl",
"1503716/stls/Iris v80-assembled.stl",
"1503716/stls/Iris v80b-printable.stl"
] | CC-BY | https://www.printables.com/model/1503716 | data_0043.tar |
1503524 | Educational Model of Oldham Coupling | <h3>My Educational Mechanical Examples Series</h3><p>This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates.<br>You can find all models in the series in this collection => <a target="_blank" rel="ugc" class="editor-link" href="https://www.printables.com/@osamutake_3341417/collec... | [
"mechanism",
"education",
"joint"
] | Learning > Engineering | [
"1503524/images/image_1_compressed.jpg",
"1503524/images/image_2_compressed.jpg",
"1503524/images/image_3_compressed.jpg"
] | [
"1503524/stls/Oldham Coupling v87-assembled.stl",
"1503524/stls/Oldham Coupling v87-printable.stl"
] | CC-BY | https://www.printables.com/model/1503524 | data_0043.tar |
1504517 | Educational Model of Planetary Differential Gear | <h3>My Educational Mechanical Examples Series</h3><p>This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates.<br>You can find all models in the series in this collection => <a target="_blank" rel="ugc" class="editor-link" href="https://www.printables.com/@osamutake_3341417/collec... | [
"gear",
"education",
"educational",
"planetarygear",
"differential"
] | Learning > Engineering | [
"1504517/images/image_1_compressed.jpg",
"1504517/images/image_2_compressed.jpg",
"1504517/images/image_3_compressed.jpg"
] | [
"1504517/stls/Planetary Differential v37-assembled.stl",
"1504517/stls/Planetary Differential v37-printable.stl"
] | CC-BY | https://www.printables.com/model/1504517 | data_0043.tar |
461522 | Edwin Jagger Safety Razor Cover | <p>This part is drawn to fit Edwin Jagger Safety Razors.</p><p>Please let me know in the comments if you want a tighter fit, I can make different variations.</p> | [
"razor",
"safetyrazor",
"razorbladecover",
"edwinjagger"
] | Household > Bathroom | [
"461522/images/image_1_compressed.jpg",
"461522/images/image_2_compressed.jpg",
"461522/images/image_3_compressed.jpg"
] | [
"461522/stls/jagger-cover.stl"
] | CC-BY | https://www.printables.com/model/461522 | data_0043.tar |
461485 | Eevee Keychain | Eevee Keychain | Download free 3D printable STL models | [
"eevee",
"keychain",
"keyring"
] | Fashion > Other Fashion Accessories | [
"461485/images/image_1_compressed.jpg"
] | [
"461485/stls/eevee keychain.stl"
] | CC0 | https://www.printables.com/model/461485 | data_0043.tar |
1059458 | Eevee Pokeball | <p>Eevee Pokeball 2d art :-) print in 2 mm Hight follow in makerworld Turbo9670 for more :-)</p> | [
"pokemon",
"eevee",
"pokemongo",
"2dart",
"2dwallart",
"eeveelutions"
] | Art & Design > Other Art & Designs | [
"1059458/images/image_1_compressed.jpg"
] | [
"1059458/stls/Eevee pokeball.stl"
] | GPL2.0 | https://www.printables.com/model/1059458 | data_0043.tar |
219433 | EEW 6.0 Bobbin (3d print friendly) | <p>I have released a different version of this bobbin that prints in 4 parts instead of 3. However, by breaking this into 4 pieces it requires less supports and the final print is nicer.</p><p>BobbinDisk 2 and BobbinTube do not require supports.</p><p>BobbinDisk1a and BobbinDisk1b get glued together.</p><p>For each bob... | [
"bobbin",
"espinner",
"thingiverse"
] | Gadgets > Other Gadgets | [
"219433/images/image_1_compressed.jpg",
"219433/images/image_2_compressed.jpg",
"219433/images/image_3_compressed.jpg",
"219433/images/image_4_compressed.jpg",
"219433/images/image_5_compressed.jpg"
] | [
"219433/stls/bobbinDisk1a.stl",
"219433/stls/bobbinDisk1b.stl",
"219433/stls/bobbinDisk2.stl",
"219433/stls/bobbinTube.stl"
] | CC-BY | https://www.printables.com/model/219433 | data_0043.tar |
596904 | Efficient Fruit Fly Trap with Transparent PLA Components | <h4>Fruit Fly Trap / Fruchtfliegenfalle</h4><h4> </h4><h4> </h4><h4>English</h4><p>The 3D-printed fruit fly trap is an effective and user-friendly solution to get rid of pesky fruit flies. It consists of three main parts: the canister, the trap, and the lid. These parts are printed from PLA material using a 0... | [
"houshold",
"fruitfly",
"fruitflytrap",
"pestcontrol",
"fruchtfliegenfalle",
"transparentfilament",
"falle",
"fruchtfliegen",
"umweltfreundlich",
"cleansolution",
"obstfliegenfalle",
"schaedlingsbekaempfung",
"transparentes",
"haushaltshilfe",
"lockmittel"
] | Household > Kitchen | [
"596904/images/image_1_compressed.jpg",
"596904/images/image_2_compressed.jpg",
"596904/images/image_3_compressed.jpg",
"596904/images/image_4_compressed.jpg",
"596904/images/image_5_compressed.jpg",
"596904/images/image_6_compressed.jpg",
"596904/images/image_7_compressed.jpg",
"596904/images/image_8... | [
"596904/stls/Deckel v1.stl",
"596904/stls/Dose v1.stl",
"596904/stls/Falle v1.stl",
"596904/stls/Flytrap v1.stl",
"596904/stls/Fruchtfliegenfalle.stl"
] | CC-BY | https://www.printables.com/model/596904 | data_0043.tar |
367154 | Egg Opener | <figure class="media"><oembed url="https://www.youtube.com/shorts/fieGskBsuKQ"></oembed></figure><p>Egg Opener</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Creality</p><p><strong>Printer: </strong></p><p>Ender 3 Pro</p><p><strong>Rafts:</strong></p><p>No</p><p><strong>Supports: </strong>... | [
"kitchen",
"opener",
"cutter",
"food",
"egg",
"eggs",
"thingiverse",
"kitchenaid",
"kitchenware",
"kitchentool",
"kitchenutensils",
"eggcup",
"eggholder",
"breakfast",
"kitchengadget"
] | Household > Kitchen | [
"367154/images/image_1_compressed.jpg",
"367154/images/image_2_compressed.jpg",
"367154/images/image_3_compressed.jpg"
] | [
"367154/stls/eierkopfer_v3.stl"
] | CC-BY | https://www.printables.com/model/367154 | data_0043.tar |
209781 | EggBot, EggDuino, SphereBot Remix | <p>Remix der phantastischen Ostereierdekorations-Maschine von Herbert_b1.</p><p>Hier findet Ihr nur die geänderten Teile, alles andere beim Original !!</p><p>https://www.thingiverse.com/thing:3431363</p><p> </p><p>Geändert wurde die Montageplatte vom Stiftantrieb, welche nun auch in der Höhe verstellbar ist,</p><p... | [
"thingiverse",
"eggbot",
"spherebot",
"ostereier",
"eggduino",
"malmaschine"
] | Hobby & Makers > RC & Robotics | [
"209781/images/image_1_compressed.jpg",
"209781/images/image_10_compressed.jpg",
"209781/images/image_11_compressed.jpg",
"209781/images/image_12_compressed.jpg",
"209781/images/image_13_compressed.jpg",
"209781/images/image_2_compressed.jpg",
"209781/images/image_3_compressed.jpg",
"209781/images/ima... | [
"209781/stls/EggBot_02c.stl",
"209781/stls/EggBot_03c.stl",
"209781/stls/EggBot_10c.stl",
"209781/stls/EggBot_10_Verlängerung.stl",
"209781/stls/EggBot_10_Verlängerung_15mm.stl",
"209781/stls/EggBot_Rev03_L.stl",
"209781/stls/EggBot_Rev03_M.stl",
"209781/stls/EggBot_Rev03_R.stl"
] | CC-BY | https://www.printables.com/model/209781 | data_0043.tar |
81330 | Ego Hedge Trimmer Wall mount | <p>Wall mount for Ego Hedge Trimmer</p>
Category: Tool Holders & Boxes | [
"thingiverse"
] | Hobby & Makers > Tools | [
"81330/images/image_1_compressed.jpg"
] | [
"81330/stls/Hedge_Trimmer.stl",
"81330/stls/Hedge_Trimmer_Bottom.stl"
] | CC-BY | https://www.printables.com/model/81330 | data_0043.tar |
335413 | Ego Leaf Blower Gutter Attachment | <p>This is a gutter cleaning attachment designed for use on Ego Power+ leaf blower.</p>
<p>it has a profile that closely matches the stock tip, just with a 180 degree bend in it.</p>
<h3>Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>Monoprice Maker Select V2</p>
<p class="detail-setting rafts"><strong>Rafts: ... | [
"thingiverse"
] | Hobby & Makers > Tools | [
"335413/images/image_1_compressed.jpg",
"335413/images/image_2_compressed.jpg",
"335413/images/image_3_compressed.jpg"
] | [
"335413/stls/DIVERTER.stl",
"335413/stls/EGO_BLOWER_EAVE_ADAPTER.stl"
] | CC-BY | https://www.printables.com/model/335413 | data_0043.tar |
258440 | Eibos Cyclopes Drying Rack | <p>I wanted to dry silica gel packets in my Eibos Cyclopes filament dryer so I designed this simple drying rack to fit inside and stack so there's two layers. There's room for a third layer, if required.</p><p>I printed it in ASA so it would withstand the highest temperature of the dryer. I didn't have any issues with ... | [
"rack",
"silicagel",
"filamentdryer",
"drying",
"eibos",
"cyclopes"
] | 3D Printers > Accessories | [
"258440/images/image_1_compressed.jpg",
"258440/images/image_2_compressed.jpg"
] | [
"258440/stls/Eibos Cyclopes Drying Rack.stl"
] | CC0 | https://www.printables.com/model/258440 | data_0043.tar |
250256 | EIBOS Cyclopes PTFE adapter plate | <p>The adapter plate allows for top mounting the ptfe connectors to the EIBOS Cyclopes to manage filament path. The design has three posts on the lower plate that have a snug fit diameter that can just press fit into the upper plate. Middle M3 screw secures it even more. Note if you break off t... | [
"spool",
"holder",
"filament",
"eibos",
"cyclopes"
] | 3D Printers > Accessories | [
"250256/images/image_1_compressed.jpg",
"250256/images/image_2_compressed.jpg",
"250256/images/image_3_compressed.jpg"
] | [
"250256/stls/ptfe_adapter_plate-BodyPlateLower.stl",
"250256/stls/ptfe_adapter_plate-BodyPlateUpper.stl"
] | CC0 | https://www.printables.com/model/250256 | data_0043.tar |
920577 | Eibos Easdry Replacement Door Finger Pull | <p>The paracord finger pull on the door of my Eibos Easdry filament dryer broke pretty quickly, which made it really frustrating to open the door. I made this replacement finger pull that can be used instead. Note that the door on my unit is a very snug fit, so the spring latch is unnecessary. If your door does not fit... | [
"handle",
"filament",
"door",
"spring",
"replacement",
"dryer",
"latch",
"fix",
"eibos",
"easdry"
] | Hobby & Makers > Tools | [
"920577/images/image_1_compressed.jpg",
"920577/images/image_2_compressed.jpg",
"920577/images/image_3_compressed.jpg",
"920577/images/image_4_compressed.jpg",
"920577/images/image_5_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/920577 | data_0043.tar |
81036 | Eierbecher / Egg cup | <p>Just a simple Egg cup</p>
<p>Ein einfacher Eierbecher</p>
<h3> Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>Artillery Sidewinder X1</p>
<p><p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div><strong>Supports:</strong></p>
<p>No</p>
<p><p class="detail-setting resolution"><strong>R... | [
"thingiverse",
"eggcup",
"eggholder",
"eierbecher"
] | Household > Kitchen | [
"81036/images/image_1_compressed.jpg",
"81036/images/image_2_compressed.jpg"
] | [
"81036/stls/Eierbecher_v2.stl"
] | CC-BY | https://www.printables.com/model/81036 | data_0043.tar |
1169163 | Ein süßes Schaf mit Herz | <p>Ein süßes Schaf mit Herz in den Händen.</p> | [
"sheep",
"heart",
"valentinesday",
"valentinesdaygifts",
"herz",
"valentinstag",
"schaf"
] | Art & Design > Sculptures | [
"1169163/images/image_1_compressed.jpg"
] | [
"1169163/stls/Sheep.stl",
"1169163/stls/sheep.stl"
] | CC-BY | https://www.printables.com/model/1169163 | data_0043.tar |
98135 | Einhell To XT60 (TS100) And USB Adapter Power X Change | <p>This is an adapter to power a device via 24V XT60 and/or USB from a Einhell Power X Change battery.<br>I created it to power my TS100 soldering iron and a fume extractor (aka fan) from the Einhell batteries. Of course you can power any USB device or 24V-35V-XT60-device from this.<br>For example i charged my phone wi... | [
"fusion360",
"adapter",
"ts100",
"thingiverse",
"batteryadapter",
"einhell",
"powerxchange"
] | Hobby & Makers > Electronics | [
"98135/images/image_1_compressed.jpg",
"98135/images/image_2_compressed.jpg",
"98135/images/image_3_compressed.jpg",
"98135/images/image_4_compressed.jpg",
"98135/images/image_5_compressed.jpg",
"98135/images/image_6_compressed.jpg",
"98135/images/image_7_compressed.jpg",
"98135/images/image_8_compres... | [
"98135/stls/EinhellAdapter.stl",
"98135/stls/EinhellAdapter1.1.stl",
"98135/stls/EinhellAdapterNoUSB.stl",
"98135/stls/HousingTop.stl",
"98135/stls/HousingTopNoUSB.stl"
] | CC-BY | https://www.printables.com/model/98135 | data_0043.tar |
989868 | Einkaufschip Schlüsselanhänger | <p>print: 0,2</p> | [
"shoppingcart",
"shoppingcartcoin",
"shoppingtoken",
"einkaufswagen",
"einkaufschip"
] | Gadgets > Other Gadgets | [
"989868/images/image_1_compressed.jpg"
] | [
"989868/stls/Einkaufschip.stl"
] | CC0 | https://www.printables.com/model/989868 | data_0043.tar |
123921 | Einkaufswagenchip | shopping cart token | <p>a shopping cart token that you can pull out of the shopping cart after unlocking it</p><h3> </h3> | [
"token",
"shopping",
"chip",
"thingiverse",
"einkaufswagen"
] | Gadgets > Other Gadgets | [
"123921/images/image_1_compressed.jpg",
"123921/images/image_2_compressed.jpg"
] | [
"123921/stls/WagenChipGroß.stl",
"123921/stls/WagenChipKlein.stl"
] | CC-BY | https://www.printables.com/model/123921 | data_0043.tar |
924342 | Einsatz fuer blauen Hünersdorf Sortimentskasten | <p>Einsatz für einen Sortimentskasten der Firma Hünersdorf.</p><p>Der Sortimentskasten hat 24 Fächer.</p><p>Dieser Einsatz passt mit seinen Abmessungen 51x51x45mm (LxBxH) sauber in die</p><p>Fächer des Kastens und lässt sich gut entnehmen.</p><p>Dieser Einsatz verfügt über eine entnehmbare Teilung.</p><p>Material: PLA<... | [
"einsatz",
"werkstatt",
"sortimentskasten"
] | Hobby & Makers > Organizers | [
"924342/images/image_1_compressed.jpg",
"924342/images/image_2_compressed.jpg",
"924342/images/image_3_compressed.jpg",
"924342/images/image_4_compressed.jpg"
] | [
"924342/stls/Einsatz_51x51x45_V03.stl",
"924342/stls/Platte_43-5x47-5x1-6_V01.stl"
] | CC0 | https://www.printables.com/model/924342 | data_0043.tar |
130160 | Einsy RAMBo Board reversed Case | <ol><li>RAMBo board inverted.</li><li>It can't attach the Raspberry Pi directly to the enclosure.</li><li>It also reinforces the frame.</li><li>It prevents the sleeve of the extruder cable from slipping out.</li></ol><p>See my <a href="https://kitto-yakudatsu.com/archives/8136">blog</a> for more information. (it's Japa... | [
"mod",
"mk3s",
"mmu2s",
"einsy",
"einsycase",
"rambo",
"einsyrambo",
"prusai3mk3smods",
"mk3smods",
"mk3splus",
"prusamod"
] | 3D Printers > Other Printer Parts & Upgrades | [
"130160/images/image_1_compressed.jpg",
"130160/images/image_2_compressed.jpg",
"130160/images/image_3_compressed.jpg",
"130160/images/image_4_compressed.jpg",
"130160/images/image_5_compressed.jpg"
] | [
"130160/stls/Einsy_reversed_case_Base_1ce.stl",
"130160/stls/Einsy_reversed_case_BedCableHolder_1ce.stl",
"130160/stls/Einsy_reversed_case_Cover_1ce.stl",
"130160/stls/Einsy_reversed_case_ExtCableHolder_1ce.stl",
"130160/stls/Post-insertion nut_M3_1c.stl"
] | GPL2.0 | https://www.printables.com/model/130160 | data_0043.tar |
98093 | Einsy Rambo Mk3s 40x40 fan modification | <p>I added a 40x40 fan to the Einsy housing. It reduces the internal temperature dramatically. <br>Its perfect for using the Pi Zero 2 W.<br><br>I printed it with 15% infill.</p><p> </p><p>Perfect for 40x40 nocuta 5v. You can take pin 1 and 7 from P3 for power.</p> | [
"pizero2w",
"raspberrypizero2w",
"rpizero2w"
] | 3D Printers > Prusa Parts & Upgrades | [
"98093/images/image_1_compressed.jpg",
"98093/images/image_2_compressed.jpg",
"98093/images/image_3_compressed.jpg"
] | [
"98093/stls/Einsy-base-cooling-fan.stl",
"98093/stls/Einsy-doors-cooling-fan.stl"
] | CC0 | https://www.printables.com/model/98093 | data_0043.tar |
1067410 | EKET Connection Fitting Clip | <p>Do you have your EKET shelves free-standing?</p><p>Did you forgot to buy the connection fittings? Or do you only need a few, while the swedes only sell packs of 12?</p><p>This model is your solution.</p><p>Print on side for best layer orientation. Print with 4 perimeter walls. You might need to tilt one shelf backwa... | [
"shelf",
"connector",
"connection",
"fitting",
"eket"
] | Household > Living Room | [
"1067410/images/image_1_compressed.jpg"
] | [
"1067410/stls/shelf_clip.stl"
] | CC-BY | https://www.printables.com/model/1067410 | data_0043.tar |
1347447 | Elagoo Centauri Carbon Lid Prop/Spacers | <p>Props to keep the lid ajar, providing airflow without the need of a riser.</p><p>Piece follows contour of frame.</p><p>Provides a 5mm opening.</p> | [
"lid",
"prop",
"spacer",
"riser"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1347447/images/image_1_compressed.jpg",
"1347447/images/image_2_compressed.jpg",
"1347447/images/image_3_compressed.jpg"
] | [
"1347447/stls/Elegoo Prop.stl",
"1347447/stls/tall prop.stl"
] | CC-BY | https://www.printables.com/model/1347447 | data_0043.tar |
599909 | Elastic Lace Anchor Clips (xpand) | <p> Now you can print xpand anchor clips in your favorite filament!</p> | [
"clip",
"shoe",
"shoes",
"shoelaces"
] | Fashion > Other Fashion Accessories | [
"599909/images/image_1_compressed.jpg",
"599909/images/image_2_compressed.jpg",
"599909/images/image_3_compressed.jpg"
] | [
"599909/stls/Xpand Clip.stl"
] | CC-BY | https://www.printables.com/model/599909 | data_0043.tar |
1182651 | Elder Scrolls Betrayal of the Second Era Accessories | <p>Accessories for Betrayal of the Second Era boardgame from Chip Theory Games.</p><p> </p><h4><i>Mini Chip Organizer</i></h4><p>This is a drop in organizer to sort the mini chips into their three categories: Overland, Stats, and Skills.</p><p>There is space for 16 additional skill chips for expansions. If y... | [
"boardgames",
"boardgame",
"boardgameaccessories",
"boardgameinserts",
"boardgameorganizer",
"botse"
] | Toys & Games > Board Games | [
"1182651/images/image_1_compressed.jpg",
"1182651/images/image_10_compressed.jpg",
"1182651/images/image_2_compressed.jpg",
"1182651/images/image_3_compressed.jpg",
"1182651/images/image_4_compressed.jpg",
"1182651/images/image_5_compressed.jpg",
"1182651/images/image_6_compressed.jpg",
"1182651/image... | [
"1182651/stls/Flat Holder.stl",
"1182651/stls/Large Cards Insert.stl",
"1182651/stls/Mini Chip Organizer.stl",
"1182651/stls/Mini Chip Standee.stl",
"1182651/stls/SquareTokenTray1.stl",
"1182651/stls/SquareTokenTray2.stl"
] | CC0 | https://www.printables.com/model/1182651 | data_0043.tar |
857377 | Elecraft AX1 style Base Loaded Vertical Antenna | <p>This video walks you through how to make a 10m base-loaded shortened vertical that is small and lightweight, and it shows you the start to finish of how to design one for any band! </p><figure class="media"><oembed url="https://youtu.be/bbbjgyLZKM4?si=J6pe8slDic6Ko5oo"></oembed></figure><p>I used online calcula... | [
"base",
"antenna",
"radio",
"ham",
"vertical",
"amateur",
"loaded",
"elecraft",
"ax1"
] | Hobby & Makers > Electronics | [
"857377/images/image_1_compressed.jpg",
"857377/images/image_2_compressed.jpg",
"857377/images/image_3_compressed.jpg",
"857377/images/image_4_compressed.jpg",
"857377/images/image_5_compressed.jpg"
] | [
"857377/stls/Cap.stl",
"857377/stls/Cap_2.stl",
"857377/stls/Main.stl"
] | CC-BY | https://www.printables.com/model/857377 | data_0043.tar |
250000 | Electric Tape Holder |
<p>Electric Tape Holder</p>
Category: Tool Holders & Boxes
| [
"thingiverse"
] | Hobby & Makers > Tools | [
"250000/images/image_1_compressed.jpg",
"250000/images/image_2_compressed.jpg"
] | [
"250000/stls/tape_holder.stl"
] | CC-BY | https://www.printables.com/model/250000 | data_0043.tar |
169228 | Electric Tooth brush & Tooth paste Holder |
<p>Electric Tooth brush & Tooth paste Holder.</p>
<p>Printed at 0.2 resolution, 20% infill in PLA on an Ender 5</p>
Category: Organization
| [
"toothbrush",
"toothpaste",
"thingiverse",
"toothbrushholder"
] | Household > Office | [
"169228/images/image_1_compressed.jpg",
"169228/images/image_2_compressed.jpg",
"169228/images/image_3_compressed.jpg"
] | [
"169228/stls/Tooth_Brush_Holder_V1.stl"
] | CC-BY | https://www.printables.com/model/169228 | data_0043.tar |
201464 | Electric toothbrush holder | <p>A small holder for 2 electric toothbrush heads + drip tray.</p><p>No supports </p> | [
"stand"
] | Household > Bathroom | [
"201464/images/image_1_compressed.jpg",
"201464/images/image_2_compressed.jpg",
"201464/images/image_3_compressed.jpg"
] | [
"201464/stls/toothbrush holder.stl"
] | CC0 | https://www.printables.com/model/201464 | data_0043.tar |
123541 | Electric train | <p>I wanted a small electric train to run around the Christmas tree. I designed this around the Adafruit DC gearbox motor “TT Motor”. The motor uses a wire tie to hold it in place. The only other parts needed are a small battery and on/off switch. 3mm socket head screws are used to hold everything together. I use some ... | [
"electric",
"train"
] | Seasonal designs > Winter & Christmas & New Year's | [
"123541/images/image_1_compressed.jpg"
] | [
"123541/stls/Axel x2.stl",
"123541/stls/Boiler cap.stl",
"123541/stls/Boiler.stl",
"123541/stls/Cab.stl",
"123541/stls/Cattle guard.stl",
"123541/stls/Drive Wheel.stl",
"123541/stls/E1_Short_Curved_Track v3.stl",
"123541/stls/Front wheel.stl",
"123541/stls/Main Body.stl",
"123541/stls/Smoke stack.... | CC-BY | https://www.printables.com/model/123541 | data_0043.tar |
172627 | Electric Utility Meter Box Key | <p>I just needed a replacement key for my outdoor utility cupboard for my electricity meter now I am having to do weekly meter reading got tired of using my fingers to unluck the door. </p><p>If you print, please share a make, and let me know that it worked.</p><p>If I am more than happy to make changes to the mod... | [
"triangle",
"key",
"meter",
"utility"
] | 3D Printers > Accessories | [
"172627/images/image_1_compressed.jpg",
"172627/images/image_2_compressed.jpg",
"172627/images/image_3_compressed.jpg",
"172627/images/image_4_compressed.jpg"
] | [
"172627/stls/Tantalus_ Electric_Utility_Meter_Box_Key.stl",
"172627/stls/Tantalus_ Electric_Utility_Meter_Box_Key_Longer.stl"
] | CC0 | https://www.printables.com/model/172627 | data_0043.tar |
840121 | Electric wires mini spool | <p>While inserting the part 1 inside the part 2, just be carrefull to have the holding wire holes in front of each others.</p><p>Printed in 0,16 with 3 walls.</p> | [
"spool",
"electric",
"roll",
"wires",
"electricwire"
] | 3D Printers > Accessories | [
"840121/images/image_1_compressed.jpg",
"840121/images/image_10_compressed.jpg",
"840121/images/image_11_compressed.jpg",
"840121/images/image_12_compressed.jpg",
"840121/images/image_13_compressed.jpg",
"840121/images/image_2_compressed.jpg",
"840121/images/image_3_compressed.jpg",
"840121/images/ima... | [
"840121/stls/Wires Mini Spool Part 1.stl",
"840121/stls/Wires Mini Spool Part 2.stl"
] | CC0 | https://www.printables.com/model/840121 | data_0043.tar |
177376 | Electrical Box Cover (EU) |
<p>Basic electrical installation box cover I needed to cover unused lightswitch hole in the wall. Top surface is designed for the filler material to grab on to.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>I3 MK3S... | [
"euro",
"thingiverse",
"electricalbox",
"electricalcover"
] | Hobby & Makers > Other Ideas | [
"177376/images/image_1_compressed.jpg",
"177376/images/image_2_compressed.jpg",
"177376/images/image_3_compressed.jpg",
"177376/images/image_4_compressed.jpg",
"177376/images/image_5_compressed.jpg"
] | [
"177376/stls/Installation_Box_Cover.stl"
] | CC-BY | https://www.printables.com/model/177376 | data_0043.tar |
366512 | Electronic case V1.1 - Ender 3 | <p>The case allows easy access to the board and has space for cable management in the space behind the board.</p><ul><li>Ready for SKR MINI E3 or similar board and Raspberry Pi ¾ or two StepDowns.</li><li>Optimized for 0.4 nozzle and for supportless printing.</li><li>Two positions for StepDowns have only one mounting h... | [
"box",
"case",
"creality",
"electric",
"raspberrypi",
"raspberrypi4",
"stepdown",
"lm2596",
"raspberrypi3",
"motherboard",
"skr",
"motherboardcase",
"withoutsupport",
"skrminie3",
"lm2596module",
"lm2596mount",
"elektronic"
] | 3D Printers > Creality Parts & Upgrades | [
"366512/images/image_1_compressed.jpg",
"366512/images/image_10_compressed.jpg",
"366512/images/image_11_compressed.jpg",
"366512/images/image_12_compressed.jpg",
"366512/images/image_13_compressed.jpg",
"366512/images/image_14_compressed.jpg",
"366512/images/image_15_compressed.jpg",
"366512/images/i... | [
"366512/stls/Cabl clamp.stl",
"366512/stls/Cable groove_cover.stl",
"366512/stls/Case_back.stl",
"366512/stls/Case_back_door.stl",
"366512/stls/Case_front-universal.stl",
"366512/stls/Case_front_door.stl",
"366512/stls/Case_front_LM2596-universal.stl",
"366512/stls/Case_front_LM2596.stl"
] | CC0 | https://www.printables.com/model/366512 | data_0043.tar |
356364 | Electronics Project Box - Snap Shut box with hinge | <p>I needed something to use as the basis for electronics projects. Prints without supports, and is easily modifiable for electronics projects. (F3d file included)</p><p> </p><p>Both parts print without supports. Print the box the right side up, print the lid with the top facing down on the plate. There are modele... | [
"box",
"electronics",
"projectbox"
] | Hobby & Makers > Organizers | [
"356364/images/image_1_compressed.jpg",
"356364/images/image_2_compressed.jpg"
] | [
"356364/stls/Snap Shut box with Hinge_BOX.stl",
"356364/stls/Snap Shut box with Hinge_LID.stl"
] | CC-BY | https://www.printables.com/model/356364 | data_0043.tar |
157393 | Electronics / Wire Junction Box (55mm x 35mm x 14mm) | <p>A small box for electronics projects with 6mm diameter wire holes on each end. The top and bottom friction fit together so no glue is required.</p><p>Outside dimensions: 55mm x 35mm x 14mm<br>Inside dimensions: 52.5mm x 32.5mm x 11mm</p> | [] | Hobby & Makers > Electronics | [
"157393/images/image_1_compressed.jpg",
"157393/images/image_2_compressed.jpg"
] | [
"157393/stls/Project Box.stl"
] | CC-BY | https://www.printables.com/model/157393 | data_0043.tar |
309024 | Elegant Prusa i3 MK3 Tool & SD card holder | <p>Elegant Prusa i3 MK3 Tool & SD card holder</p> | [
"tool",
"holder",
"sdcard"
] | 3D Printers > Prusa Parts & Upgrades | [
"309024/images/image_1_compressed.jpg"
] | [
"309024/stls/Prusa_MK3_Toolholder.stl"
] | GPL2.0 | https://www.printables.com/model/309024 | data_0043.tar |
1308480 | Elegoo Centari Carbon Hot End Box | <p>A simple box for you spare hot ends uses 6 m3 x30 screws.</p> | [
"elegoo",
"centari"
] | 3D Printers > Accessories | [
"1308480/images/image_1_compressed.jpg",
"1308480/images/image_2_compressed.jpg",
"1308480/images/image_3_compressed.jpg"
] | [
"1308480/stls/box.stl",
"1308480/stls/Insert.stl",
"1308480/stls/latch.stl",
"1308480/stls/lid.stl"
] | CC0 | https://www.printables.com/model/1308480 | data_0043.tar |
1226447 | Elegoo Centauri Carbon Filament guide PTFE for runnout sensor | <p>A quik design so you can connect a PTFE tube to the runout sensor in the Centauri carbon, im using it to connect it to my my filament dryer, just unscrew a little bit the sensor, then push the dapter and screw again.</p><p>Use Supports</p><p>Print in PETG</p> | [
"elegoo",
"centauricarbon"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1226447/images/image_1_compressed.jpg",
"1226447/images/image_2_compressed.jpg",
"1226447/images/image_3_compressed.jpg"
] | [
"1226447/stls/elegoo carbon.stl"
] | CC-BY | https://www.printables.com/model/1226447 | data_0043.tar |
1319913 | Elegoo Centauri Carbon Panal Fan Cover - UPLOADED | <p>Matessss! My apologies for the lack of response and the measurement error. I'm uploading the file again in STL format so you can download it without any problems! Greetings, Makers</p> | [
"cover",
"fan",
"carbon",
"centauri",
"centauricarbon"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1319913/images/image_1_compressed.jpg"
] | [
"1319913/stls/Cover de Fan de Capa CC STL.stl"
] | CC0 | https://www.printables.com/model/1319913 | data_0043.tar |
1372771 | Elegoo Centauri Carbon Sunlu S1 Dryer Holder | <p>Simple part adaptation to work with the Elegoo Centauri Carbon, unfortunately its too large to print on the CC so hopefully you have a larger printer as well. Requires 6 heat inserts to attach the side, Fits 4 8x3mm Magnets to help secure the mount. Use of this will require the filament runout sensor to be relocated... | [
"holder",
"adapter",
"carbon",
"elegoo",
"sunlu",
"dyer",
"centauri"
] | 3D Printers > Accessories | [
"1372771/images/image_1_compressed.jpg",
"1372771/images/image_2_compressed.jpg"
] | [
"1372771/stls/Body.stl",
"1372771/stls/Front.stl",
"1372771/stls/Lock.stl"
] | CC0 | https://www.printables.com/model/1372771 | data_0043.tar |
1465036 | Elegoo centavri carbon plug | <p>ensures the tightness of the housing and preserves heat in the printing chamber</p> | [
"plug",
"carbon",
"elegoo",
"centavri"
] | 3D Printers > Test Models | [
"1465036/images/image_1_compressed.jpg",
"1465036/images/image_2_compressed.jpg",
"1465036/images/image_3_compressed.jpg",
"1465036/images/image_4_compressed.jpg"
] | [
"1465036/stls/Zaglushka cc.stl",
"1465036/stls/zaglushka2.stl"
] | CC-BY | https://www.printables.com/model/1465036 | data_0043.tar |
961869 | Elegoo Mars 2 Pro Drip Tray | <p>This is a must for any Resin 3D printer. Made exclusively for the elegoo Mars 2 Pro, it fits over the resin tray whilst still on the printer, to catch all the drips as you take off the build plate. Print easily fits onto the Prusa Mk4, or any likesized bed printer. Once its too messy, print a new one. Lightweight an... | [
"3dprinting",
"resin",
"elegoo",
"capture",
"driptray",
"mars2pro",
"dripshelf",
"assessories",
"drips"
] | 3D Printers > Other Printer Parts & Upgrades | [
"961869/images/image_1_compressed.jpg",
"961869/images/image_2_compressed.jpg",
"961869/images/image_3_compressed.jpg",
"961869/images/image_4_compressed.jpg"
] | [
"961869/stls/elegoo mars 2 pro drip tray v3.stl",
"961869/stls/elegoo mars 2 pro drip tray.stl"
] | CC0 | https://www.printables.com/model/961869 | data_0043.tar |
1158644 | Elegoo Mars 5 Ultra lid cover | <p>Imprimé sur une cr10 v3 en 0.2mm PETG</p><p>Attention: on n'est pas obligé d’enlever les vis du bac pour l'installer !</p> | [
"lid",
"cover",
"covers",
"elegoo",
"mars5ultra",
"elegoomars5ultra"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1158644/images/image_1_compressed.jpg",
"1158644/images/image_2_compressed.jpg",
"1158644/images/image_3_compressed.jpg"
] | [
"1158644/stls/Couvercle.stl"
] | CC0 | https://www.printables.com/model/1158644 | data_0043.tar |
324158 | Elegoo Neptune 2, 2s, 2d, 3 Filament Guide (low profile) | <p>This is used to stop bending, or snaps in the filament. This filament guide helps change the direction from vertical to horizontal and into the filament sensor. You will need a 608 bearing and M3X20mm screws to mount this.</p><p>If you have a dual gear extruder I would suggest printing the filament sensor spacer:</p... | [
"filamentguide",
"3dprinterparts",
"elegoo",
"3dprinterupgrade",
"elegooneptune2",
"elegooneptune",
"elegooneptune2s",
"elegooneptune2d",
"filamentguider",
"elegooneptune3"
] | 3D Printers > Other Printer Parts & Upgrades | [
"324158/images/image_1_compressed.jpg",
"324158/images/image_2_compressed.jpg",
"324158/images/image_3_compressed.jpg"
] | [
"324158/stls/elegoo filament guide wheelV2.stl",
"324158/stls/elegoo filament guideV2.stl"
] | CC-BY | https://www.printables.com/model/324158 | data_0043.tar |
860758 | Elegoo Neptune 3 Pro Side Cutters Holder | <p>Print on the top side without supports</p><figure class="image image_resized image-style-align-left" style="width:62.41%;"><img src="https://media.printables.com/media/prints/860758/rich_content/2a7833cd-c34e-4dc5-a3f9-d04685358edc/slicer.png#%7B%22uuid%22%3A%222febe9a9-da53-4b7d-86ad-75d7be743ecf%22%2C%22w%22%3A302... | [
"sidecutter",
"sidecutterholder",
"neptune3pro"
] | 3D Printers > Other Printer Parts & Upgrades | [
"860758/images/image_1_compressed.jpg",
"860758/images/image_2_compressed.jpg",
"860758/images/image_3_compressed.jpg",
"860758/images/image_4_compressed.jpg"
] | [
"860758/stls/NeptuneSideCuttersHolder.stl"
] | CC-BY | https://www.printables.com/model/860758 | data_0043.tar |
891855 | Elegoo Neptune 4 Pro belt tensioner | <p>I have broken a belt tensioner piece for my Neptune 4 Pro printer, so I designed a replacement piece. The new piece uses</p> | [
"belttensioner",
"neptune4pro",
"neptune4"
] | 3D Printers > Other Printer Parts & Upgrades | [
"891855/images/image_1_compressed.jpg"
] | [
"891855/stls/Elegoo Neptune belt tensionerV2.stl"
] | CC-BY | https://www.printables.com/model/891855 | data_0043.tar |
322096 | Elegoo Resin Bottle emtying adapter | <p>This is a simple adapter for fully emtying your used resin bottles.</p><p>Simply screw the adapter on the almost empty bottle first. Place the bottle with the adapter on the bottle to be filled and carefully pour the contents of the bottle. As soon as tmost of the resin has been transferred, the second bottle can be... | [
"bottle",
"printer",
"accessory",
"adapter",
"resin",
"msla",
"elegoo",
"emptying"
] | 3D Printers > Accessories | [
"322096/images/image_1_compressed.jpg",
"322096/images/image_2_compressed.jpg",
"322096/images/image_3_compressed.jpg"
] | [
"322096/stls/Elegoo_bottle_emptying_adapter.stl"
] | CC-BY | https://www.printables.com/model/322096 | data_0043.tar |
331647 | Elegoo Saturn (S): Vat / Tank Cover | <p>This is a cover for the Elegoo Saturn (S).<br>Use black filament to block UV light.<br>Print with many top / bottom layers.</p> | [
"2",
"cover",
"tank",
"s",
"saturn",
"vet",
"elegoo"
] | 3D Printers > Other Printer Parts & Upgrades | [
"331647/images/image_1_compressed.jpg",
"331647/images/image_2_compressed.jpg"
] | [
"331647/stls/Saturn Vat Cover T.stl",
"331647/stls/Saturn Vat Cover T_.stl",
"331647/stls/Saturn Vat Cover.stl"
] | CC0 | https://www.printables.com/model/331647 | data_0043.tar |
275404 | Elegoo Saturn 2 Vat Holder | <p>Made a Saturn 2 Vat Holder that is mounted to 2020 tslot extruded aluminum (pictured is 50mm, but 40mm is likely tall enough for most cases). Also included a funnel holder and base to mount to another surface. Since this is uses 2020 tslot, you can search for other solutions for funnel and base as well!</p><p>... | [
"vat",
"resinprinter",
"2020extrusion",
"extrudedaluminum",
"saturn2",
"elegoosaturn2"
] | 3D Printers > Other Printer Parts & Upgrades | [
"275404/images/image_1_compressed.jpg",
"275404/images/image_2_compressed.jpg",
"275404/images/image_3_compressed.jpg"
] | [
"275404/stls/Bolted Base - Part 1.stl",
"275404/stls/Funnel Holder.stl",
"275404/stls/Vat Holder Complete - Part 1.stl"
] | CC-BY | https://www.printables.com/model/275404 | data_0043.tar |
1135143 | Elegoo vacuum pump gridfinity | [
"gridfinity"
] | Hobby & Makers > Organizers | [
"1135143/images/image_1_compressed.jpg"
] | [
"1135143/stls/elegoo-vacuum-pump_2x3.stl"
] | CC-BY | https://www.printables.com/model/1135143 | data_0043.tar | |
257265 | Elektron Digitakt protection Cover / Decksaver |
<p>A 2mm thick cover for the Digitakt (it probably fits the Digitone as well).</p>
<p>It can be kept in place with a strap.</p>
<p>I personaly use it with a amazonbasics gopro bag (L) :
<a href="https://www.amazon.fr/gp/product/B00PMMB4X8/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1&tag=thingiverse09-20... | [
"thingiverse",
"elektron",
"digitakt"
] | Hobby & Makers > Music | [
"257265/images/image_1_compressed.jpg",
"257265/images/image_2_compressed.jpg",
"257265/images/image_3_compressed.jpg",
"257265/images/image_4_compressed.jpg",
"257265/images/image_5_compressed.jpg"
] | [
"257265/stls/Digitakt_decksaver_V2.stl"
] | CC-BY | https://www.printables.com/model/257265 | data_0043.tar |
1041523 | Element Under Desk Drawer - Large - Four Interiors | <h3>Element Under Desk Drawers</h3><p>I wanted larger deeper drawers under my desk, so I created this set with four interior options.</p><p>It is just over 70mm deep x 200mm wide x 200mm in length. I used a tolerance of 0.7mm so the operation is smooth.</p><p>Its a lengthy print at between 9 and 11 hours for each Drawe... | [
"desk",
"storage",
"desktidy",
"drawer",
"drawerorganizer",
"deskstorage",
"underdesk",
"underdeskdrawer"
] | Household > Office | [
"1041523/images/image_1_compressed.jpg",
"1041523/images/image_2_compressed.jpg",
"1041523/images/image_3_compressed.jpg",
"1041523/images/image_4_compressed.jpg",
"1041523/images/image_5_compressed.jpg",
"1041523/images/image_6_compressed.jpg",
"1041523/images/image_7_compressed.jpg",
"1041523/images... | [
"1041523/stls/ELEMENT DRAWER SIGN - CABLES.stl",
"1041523/stls/ELEMENT DRAWER SIGN - CLEANING.stl",
"1041523/stls/ELEMENT DRAWER SIGN - DEVICES.stl",
"1041523/stls/ELEMENT DRAWER SIGN - STATIONERY.stl",
"1041523/stls/ELEMENT DRAWER SIGN - TOOLS.stl",
"1041523/stls/Element Drawer Thick - Quarters.stl",
"... | CC-BY | https://www.printables.com/model/1041523 | data_0043.tar |
97204 | Elfa wall hanger | <p>The design is tight fit so you either have to push it in of do some sanding if you want a looser fit. </p><p>Distance between the hooks is 7.1mm</p><p>Total length 56mm</p><p>Mine is printed at 0,3mm with paint on support for the hooks. </p> | [
"hook",
"hanger",
"wallmounted",
"wallhook",
"wallhanger",
"elfa"
] | Household > Other House Equipment | [
"97204/images/image_1_compressed.jpg",
"97204/images/image_2_compressed.jpg"
] | [
"97204/stls/Elfa.stl"
] | CC0 | https://www.printables.com/model/97204 | data_0043.tar |
604471 | Elgato Facecam Privacy Shade | <p>I've found that I prefer a sliding privacy guard for webcams. When manipulating a cap or hinge design, it's too easy to throw off your framing. This design was a bit of a challenge, but I like how it turned out; no additional hardware, easy to print, and smooth to work with.</p><p>I printed mine in PETG with a... | [
"webcam",
"elgato"
] | Gadgets > Computers | [
"604471/images/image_1_compressed.jpg",
"604471/images/image_2_compressed.jpg",
"604471/images/image_3_compressed.jpg",
"604471/images/image_4_compressed.jpg",
"604471/images/image_5_compressed.jpg"
] | [
"604471/stls/facecam_privacy-shade_frame.stl",
"604471/stls/facecam_privacy-shade_shade.stl"
] | CC-BY | https://www.printables.com/model/604471 | data_0043.tar |
864137 | Elliptical gears | <p>Oval or elliptical gears are a type of gear that have an elliptical or oval shape. In contrast to traditional gears with a circular shape, these shapes are more non-standard and can be used in specialized applications, such as transmissions with unusual dimensions or where traditional gears are not suitable. Such ge... | [] | Learning > Engineering | [
"864137/images/image_1_compressed.jpg",
"864137/images/image_2_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/864137 | data_0043.tar |
1060765 | Elliptical Gears Mesh FIles | <p>Converted the files for people who don't have Solidworks</p> | [
"gear",
"gears",
"fusion360"
] | Art & Design > Other Art & Designs | [
"1060765/images/image_1_compressed.jpg",
"1060765/images/image_2_compressed.jpg"
] | [
"1060765/stls/Elliptical gears v1.stl"
] | CC0 | https://www.printables.com/model/1060765 | data_0043.tar |
186467 | elsa topper |
<p>elsa pencil topper</p>
Category: Other
| [
"pencil",
"topper",
"thingiverse",
"elsa"
] | Hobby & Makers > Other Ideas | [
"186467/images/image_1_compressed.jpg",
"186467/images/image_2_compressed.jpg"
] | [
"186467/stls/enya_topper_zbd.stl"
] | CC-BY | https://www.printables.com/model/186467 | data_0043.tar |
368471 | Elucidator Sword SAO | <p>Es</p><p>Espada de Kirito del anime Sword Art Online, modelo completo de la espada para imprimir por partes</p><p>Primero se recomienda imprimir todas las piezas y luego ensambrar usando los conectores, se puede agrepar pegamento para que las piezas no se muevan y queden completamente fijas.</p><p>En</p><p>Sword of ... | [
"sword",
"anime",
"espada",
"sao",
"animeprops"
] | Costumes & Accessories > Cosplay & Costumes in general | [
"368471/images/image_1_compressed.jpg",
"368471/images/image_2_compressed.jpg",
"368471/images/image_3_compressed.jpg",
"368471/images/image_4_compressed.jpg",
"368471/images/image_5_compressed.jpg"
] | [
"368471/stls/Alignment_20mm_X5.stl",
"368471/stls/Alignment_40mm_X7.stl",
"368471/stls/Blade_Bottom.stl",
"368471/stls/Blade_Middle_X3.stl",
"368471/stls/Blade_Top.stl",
"368471/stls/Grip.stl",
"368471/stls/Guard_Bottom.stl",
"368471/stls/Guard_Spike.stl",
"368471/stls/Guard_Top.stl",
"368471/stls... | CC0 | https://www.printables.com/model/368471 | data_0043.tar |
144638 | emblema Transformers Autobot / sign | <p>5 x 5 cm y un solo color , con altura 5mm </p><p>Tiene dos alturas con las que se puede hacer un cambio de color (fondo y frontal).</p><p>27.08.2023 Hay un nuevo diseño con una anilla para utilizar de colgante o llavero</p><p> </p><p>With two highs, you can make a two colors sign (background and prin... | [
"decoration",
"wall",
"logo",
"sign",
"car",
"autobot",
"transformers",
"movie",
"keys",
"emblem",
"motorcycle",
"cycling",
"2dlogo"
] | Art & Design > 2D Plates & Logos | [
"144638/images/image_1_compressed.jpg"
] | [
"144638/stls/AI3M_Autobot.stl",
"144638/stls/autobot keychain.stl"
] | CC0 | https://www.printables.com/model/144638 | data_0043.tar |
150121 | Embroidery Floss Bobbin Winder | <p>I designed this tool to help me wind embroidery floss to the standard bobbins for better, more organized storage.</p><p>It has a G clamp at its base to clamp it to the edge of a table, workbench or similar surface to hold it in place.</p><p>In order to assemble this tool you will need one <strong>607-2RS bearing </s... | [
"embroidery",
"sewing",
"thingiverse",
"winding",
"sewingspool",
"crossstitch",
"sewingaid",
"embroideryfloss",
"embroiderythread"
] | Hobby & Makers > Tools | [
"150121/images/image_1_compressed.jpg",
"150121/images/image_2_compressed.jpg",
"150121/images/image_3_compressed.jpg",
"150121/images/image_4_compressed.jpg",
"150121/images/image_5_compressed.jpg",
"150121/images/image_6_compressed.jpg",
"150121/images/image_7_compressed.jpg",
"150121/images/image_8... | [
"150121/stls/bobbin_holder_bolt.stl",
"150121/stls/bobbin_holder_nobolt.stl",
"150121/stls/clamp_frame.stl",
"150121/stls/clamp_protector.stl",
"150121/stls/handle_bolt.stl",
"150121/stls/handle_nobolt.stl",
"150121/stls/screw_and_knurled_knobHD.stl"
] | CC-BY | https://www.printables.com/model/150121 | data_0043.tar |
153961 | Embudo / Colador | [
"tools",
"funnel",
"strainer",
"herramientas",
"embudo",
"colador"
] | Hobby & Makers > Tools | [
"153961/images/image_1_compressed.jpg",
"153961/images/image_2_compressed.jpg"
] | [
"153961/stls/Embudo.stl"
] | CC0 | https://www.printables.com/model/153961 | data_0043.tar | |
1500272 | Emoji (Single-Color Printer, Commercial Use Allowed). Grinning Face with Smiling Eyes | <h3>Please read the entire text before printing! I often make the mistake of not doing so.</h3><p>I really appreciate support of my projects: <a href="https://boosty.to/artificialworld/donate">https://boosty.to/artificialworld/donate</a></p><h3>1. Model:</h3><p><strong>Diameter</strong>: 90mm. Scaling down may require ... | [
"decoration",
"multicolor",
"toys",
"figurine",
"decor",
"tabletop",
"fun",
"snapfit",
"internet",
"emoji",
"commercial"
] | Tabletop Miniatures > Characters & Monsters | [
"1500272/images/image_1_compressed.jpg",
"1500272/images/image_2_compressed.jpg",
"1500272/images/image_3_compressed.jpg",
"1500272/images/image_4_compressed.jpg",
"1500272/images/image_5_compressed.jpg",
"1500272/images/image_6_compressed.jpg"
] | [
"1500272/stls/EmojiEyes.stl",
"1500272/stls/EmojiEyesAndScrew.stl",
"1500272/stls/EmojiOriginal.stl",
"1500272/stls/EmojiScrew.stl",
"1500272/stls/EmojiSphereBottom.stl",
"1500272/stls/EmojiSphereTop.stl",
"1500272/stls/EmojiSphereTopAndBottom.stl",
"1500272/stls/EmojiTeeth.stl",
"1500272/stls/Emoji... | CC-BY | https://www.printables.com/model/1500272 | data_0043.tar |
240001 | Empire shopping cart coin € size | <p>Remix of:</p><p><a href="/de/prints/141305-euro-shopping-cart-coin-star-wars-empire-logo"><strong>Euro shopping cart coin - Star Wars Empire Logo</strong></a></p><p>from<a href="/de/social/225126-feroc"> Feroc</a></p><p>I removed the base layer and expanded it in Z to match the origin height.</p> | [
"starwars",
"empire",
"shoppingcart",
"shoppingcartcoin",
"darthvaderstarwars",
"starwarsjedifallenorder",
"einkaufswagenchip",
"einkaufswagen",
"galacticempire",
"einkaufschip",
"empirestrikesback"
] | Household > Other House Equipment | [
"240001/images/image_1_compressed.jpg"
] | [
"240001/stls/Euro_Empire_cartcoin.stl"
] | CC-BY | https://www.printables.com/model/240001 | data_0043.tar |
259625 | Employee of the Month fridge magnet | <p>Always wanted to have your own „Employee of the Month“ badge? Have at it! Now comes in the ever-so-cool form of a fridge magnet. </p><p>Best printed with 0.25 mm or less diameter nozzle. Features two filament swaps allowing the printer to stop for magnet insertion (model is designed for two pieces of round 5x2 ... | [
"office",
"magnet",
"badge",
"fridgemagnets",
"boring",
"corporate"
] | Household > Home Decor | [
"259625/images/image_1_compressed.jpg",
"259625/images/image_2_compressed.jpg"
] | [
"259625/stls/EMPLOYEE_of_the_month.stl"
] | CC0 | https://www.printables.com/model/259625 | data_0043.tar |
1152988 | Emporia Vue V3 ESP home flash jig w/ fixed tolerances | <p>I had difficulty assembling the original jig with the suggested pogo pins, as the holes were too tight when printed with PETG. I added about .45 mm to the diameter of the holes in the jig, and sunk the screw holes in so that the original screws are usable to hold things in place. </p><p> </p><p>Also upload... | [
"tools",
"electronicsworkbench"
] | Hobby & Makers > Tools | [
"1152988/images/image_1_compressed.jpg",
"1152988/images/image_2_compressed.jpg"
] | [
"1152988/stls/jig-emporia_vue3_flash_jig.stl",
"1152988/stls/jig-emporia_vue3_flash_jig_with_text.stl"
] | CC-BY | https://www.printables.com/model/1152988 | data_0043.tar |
468046 | Enclosed Voron 2020 Extrusion Frame Camera Mount System Adapter | <p>This mounting adapter allows clearance for the panels on enclosed Voron printers. It is a mashup of the “Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 by Sneaks” system and the mount used by the “Removable Doors” mod by ElPoPo: <a href="https://mods.vorondesign.com/detail/WqhhKrXksAZ4omhHS1RY4Q">https... | [
"mount",
"2020mount",
"voron"
] | 3D Printers > Voron Parts & Upgrades | [
"468046/images/image_1_compressed.jpg",
"468046/images/image_2_compressed.jpg",
"468046/images/image_3_compressed.jpg"
] | [
"468046/stls/voron_frame_mount.stl"
] | GPL3.0 | https://www.printables.com/model/468046 | data_0043.tar |
436274 | Enclosure door blocker | <p>This is a very basic tool to keep the doors of your Original Prusa Enclosure open just enough to be able to print PLA without overheating. And cats cannot tampered with the print!</p><p>Depending on your configuration, letting the doors fully opened is not an option, this is the fundamental reason why I draw this mo... | [
"doorstop",
"originalprusaenclosure"
] | 3D Printers > Other Printer Parts & Upgrades | [
"436274/images/image_1_compressed.jpg",
"436274/images/image_2_compressed.jpg"
] | [
"436274/stls/Enclosure door blocker-No Text.stl",
"436274/stls/Enclosure door blocker-PLA.stl"
] | CC-BY | https://www.printables.com/model/436274 | data_0043.tar |
1266773 | Enclosure For Flashforge AD5X | [] | 3D Printers > Other Printer Parts & Upgrades | [
"1266773/images/image_1_compressed.jpg",
"1266773/images/image_2_compressed.jpg"
] | [
"1266773/stls/A1.stl",
"1266773/stls/A2.stl",
"1266773/stls/A3.stl",
"1266773/stls/A4.stl",
"1266773/stls/B1.stl",
"1266773/stls/B2.stl",
"1266773/stls/B3.stl",
"1266773/stls/B4.stl",
"1266773/stls/C1.stl",
"1266773/stls/C2.stl",
"1266773/stls/C3.stl",
"1266773/stls/C4.stl",
"1266773/stls/D1... | CC0 | https://www.printables.com/model/1266773 | data_0043.tar | |
339266 | Enclosure LCD 1602 ESP32 DS3232RTC I2C |
<p>Enclosure for LCD 1602 screen driven by a ESP32 DOIT DevKit v1 with a DS3232RTC I2C Real Time Clock module</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>I3 MK3S</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>... | [
"box",
"enclosure",
"fusion360",
"esp32",
"thingiverse",
"lcd1602",
"ds3232"
] | Hobby & Makers > Other Ideas | [
"339266/images/image_1_compressed.jpg",
"339266/images/image_2_compressed.jpg",
"339266/images/image_3_compressed.jpg"
] | [
"339266/stls/Box_-_CPUMonitorJr.stl",
"339266/stls/Faceplate_-_CPUMonitorJr.stl",
"339266/stls/Lid_-_CPUMonitorJr.stl"
] | CC-BY | https://www.printables.com/model/339266 | data_0043.tar |
814801 | Enclosure Spool Roller (Wider) | <p>My spool roller (wider) version for enclosures.</p><p>Print the feet with TPU filament.</p><p>There is a narrow version (zip file).</p><p>Use it with my Enclosure MMU Buffer: <a href="https://www.printables.com/model/814784-enclosure-mmu-buffer-wider">https://www.printables.com/model/814784-enclosure-mmu-buffer-wide... | [
"spool",
"filament",
"enclosure",
"spoolholder",
"filamentspoolholder",
"roller"
] | 3D Printers > Prusa Parts & Upgrades | [
"814801/images/image_1_compressed.jpg",
"814801/images/image_2_compressed.jpg",
"814801/images/image_3_compressed.jpg",
"814801/images/image_4_compressed.jpg"
] | [
"814801/stls/Bottom_1.stl",
"814801/stls/Bottom_2.stl",
"814801/stls/Left_Side.stl",
"814801/stls/Right_Side.stl",
"814801/stls/Roller_Foot_x4.stl",
"814801/stls/Roller_Orange_x12.stl",
"814801/stls/Roller_x2.stl"
] | GPL2.0 | https://www.printables.com/model/814801 | data_0043.tar |
557498 | Enclosure USB Holder | <p>A USB Stick holder for the Prusa Enclosure. It can be attached with M3 screws and short ones are more then enough. </p> | [
"enclosure",
"usb",
"usbholder"
] | 3D Printers > Accessories | [
"557498/images/image_1_compressed.jpg",
"557498/images/image_2_compressed.jpg"
] | [
"557498/stls/Enclosure USB Holder.stl"
] | CC-BY | https://www.printables.com/model/557498 | data_0043.tar |
838292 | Endcap for 20x20mm V-Slot aluminum profile | <p>Endcap for 20x20mm V-Slot aluminum extrusion</p><p>Source files included, includes STL, STEP and Autodesk Fusion files.</p><p>Compatible with V-Slot profile. Can be used with Type-B profile, but the fit with the profile is very loose.</p><p>Updated: new version with closer tolerances and longer tabs for a tighter gr... | [] | Hobby & Makers > Mechanical Parts | [
"838292/images/image_1_compressed.jpg",
"838292/images/image_2_compressed.jpg",
"838292/images/image_3_compressed.jpg",
"838292/images/image_4_compressed.jpg"
] | [
"838292/stls/2020V-endcap.stl"
] | CC0 | https://www.printables.com/model/838292 | data_0043.tar |
359323 | Ender 2 Pro (stockish) Handle | <p>This is similar to the stock handle that comes with the Ender 2 Pro. The Z support hole is meant to be bigger than the Z rod so it does not restrict it's movement just like the stock support. I bought my printer used and it didn't come with it, so that is why I redesigned this. :)</p><p>(All the other designs which ... | [
"handle",
"ender2pro"
] | 3D Printers > Creality Parts & Upgrades | [
"359323/images/image_1_compressed.jpg",
"359323/images/image_2_compressed.jpg",
"359323/images/image_3_compressed.jpg"
] | [
"359323/stls/Ender2_Handle-Z_support.stl",
"359323/stls/Ender2_Handle.stl"
] | CC0 | https://www.printables.com/model/359323 | data_0043.tar |
338329 | Ender 2 Pro cable guide chain mod | <p>This is a remix of Denitz's cable guide for the Ender 2 Pro. Cable chain attachment points for the heatbed and extruder cables have been added. Compatible with the cable chains from (https://www.thingiverse.com/thing:2920060). Need to use zip ties to keep the cables in place.</p><p>Edit: I forgot to mention that the... | [
"cableguide",
"cablechain",
"ender2pro",
"crealityender2pro"
] | 3D Printers > Creality Parts & Upgrades | [
"338329/images/image_1_compressed.jpg",
"338329/images/image_2_compressed.jpg",
"338329/images/image_3_compressed.jpg"
] | [
"338329/stls/Ender 2 Pro cable guide chain mod.stl"
] | CC0 | https://www.printables.com/model/338329 | data_0043.tar |
296840 | Ender 2 Pro Drawer | <p>This is a drawer i modeled for the Ender2Pro. my initial intentions were to mount a pi in the drawer but went with a different mount solution instead. It fits and is printable on the ender2pro. </p><p>I included a .step file for your remix pleasure</p> | [
"creality",
"ender",
"pro",
"drawer",
"ender2pro",
"e2p"
] | 3D Printers > Creality Parts & Upgrades | [
"296840/images/image_1_compressed.jpg"
] | [
"296840/stls/E2PDrawer.stl"
] | CC-BY | https://www.printables.com/model/296840 | data_0043.tar |
420168 | Ender 2 Pro knob - better fit | <p>The original model was a bit too deep, thus sometimes causing problems with registering presses. This one fixes that and makes the knob stay closer to the panel for improved looks.</p> | [
"knob",
"ender2pro"
] | 3D Printers > Creality Parts & Upgrades | [
"420168/images/image_1_compressed.jpg"
] | [
"420168/stls/Ender 2 Pro knob -2mm.stl"
] | GPL2.0 | https://www.printables.com/model/420168 | data_0043.tar |
374202 | Ender 2 Pro QR Code Covers | <p>Ender 2 Pro QR code cover with three options. May work on other Ender models but I can't verify that. Internal dimensions are 42.2mm squared. I not create the torso, only modified it to fit the QR cover. </p><p> </p><p> </p><p>The Original Torso can be downloaded <a href="https://cults3d.com/en/3d-mod... | [
"plate",
"ender",
"cover",
"qrcode",
"qr",
"qrplate",
"ender2ender2",
"ender2pro",
"qrcodecover",
"crealityender2pro",
"ender2proupgrade"
] | 3D Printers > Accessories | [
"374202/images/image_1_compressed.jpg",
"374202/images/image_2_compressed.jpg",
"374202/images/image_3_compressed.jpg",
"374202/images/image_4_compressed.jpg"
] | [
"374202/stls/Blank QR Cover.stl",
"374202/stls/Hex QR Backing.stl",
"374202/stls/Hex QR Cover Torso 1.stl",
"374202/stls/Hex QR Cover Torso 2.stl",
"374202/stls/Hex QR Cover.stl"
] | CC-BY | https://www.printables.com/model/374202 | data_0043.tar |
297637 | Ender 2 Pro Z-Motor Mount |
<p><strong>I remixed this Steppermount for my Ender 2 Pro. Thank you.</strong></p>
<p><strong>Visit my <a href="/pakkko/collections/ender-2-pro-an-umbau">Ender 2 Pro Collection</a> for more Ender 2 Pro stuff.</strong></p>
<p><strong>You also can visit my <a href="https://www.facebook.com/groups/e2procommunity">Ender... | [
"ender2",
"thingiverse",
"crealityender2",
"ender2pro",
"pakkko",
"e2pro"
] | 3D Printers > Creality Parts & Upgrades | [
"297637/images/image_1_compressed.jpg",
"297637/images/image_2_compressed.jpg"
] | [
"297637/stls/E2Pro_Z-Motor_Mount_v1.stl"
] | CC-BY | https://www.printables.com/model/297637 | data_0043.tar |
445691 | Ender 3 Ultimate Bed Level | <h3>Super Simple Bed Levelling Ender 3 (or any 225*225 bed size printer)</h3>
<p>** For Best Results in Cura change Special Modes > Print Sequence to ' One at a time' !</p>
<p>When levelling your bed, straight lines are pretty useless, to ensure the bed is level you need to print curved lines as only when the bed is... | [
"creality",
"ender",
"easy",
"bed",
"quick",
"bedlevel",
"ender3",
"ultimate",
"thingiverse",
"simple",
"bedleveling",
"ender3pro",
"ender3v2",
"e3v2"
] | 3D Printers > Test Models | [
"445691/images/image_1_compressed.jpg",
"445691/images/image_2_compressed.jpg"
] | [
"445691/stls/BedLevelling_Ender_3.stl"
] | CC-BY | https://www.printables.com/model/445691 | data_0043.tar |
400066 | Ender 3 (or any other probably) bowden coupler clip extruder fitting | <p>Inspiration came from a <a href="https://www.printables.com/model/258769-ender-3-extruder-fitting-clip-fix">Marin_Bs</a> bowden coupler clip, but I upgraded it substantially.<br>- it has an angled thread so it can be tightened with a provided nut (the more you turn the more it will squeeze)<br>- it can be reused man... | [
"bowden",
"coupler",
"ender3",
"bowdenclamp",
"ptfecoupler",
"bowdencoupler"
] | 3D Printers > Creality Parts & Upgrades | [
"400066/images/image_1_compressed.jpg",
"400066/images/image_2_compressed.jpg"
] | [
"400066/stls/bowden_clip.stl"
] | CC-BY | https://www.printables.com/model/400066 | data_0043.tar |
79492 | Ender 3 (Pro) long tray |
<p>Remixed this tray and made it a bit longer so you can fit more stuff. Should fit both the Ender 3 and the Pro models</p>
<h3> Print Settings</h3>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p><p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div><strong>Resolution:</strong></p>
<p>0.2</... | [
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"79492/images/image_1_compressed.jpg",
"79492/images/image_2_compressed.jpg",
"79492/images/image_3_compressed.jpg",
"79492/images/image_4_compressed.jpg"
] | [
"79492/stls/drawer1-pro.stl"
] | CC-BY | https://www.printables.com/model/79492 | data_0043.tar |
246372 | Ender 3 (V2) PEI sheet allignment bracket | <p>If you like me parts, you can also support me here: <a href="https://buymeacoffee.com/andretheengineer">https://buymeacoffee.com/andretheengineer</a> :)</p><p>i didnt like to freely align my pei sheet, since it was never perfect and my self diagnosed ocd was driving my perfectionism crazy. hence i designed these bra... | [
"bracket",
"pei",
"ender3",
"flexplate"
] | 3D Printers > Creality Parts & Upgrades | [
"246372/images/image_1_compressed.jpg",
"246372/images/image_2_compressed.jpg"
] | [
"246372/stls/PEI Bracet.stl"
] | CC0 | https://www.printables.com/model/246372 | data_0043.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.