model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
346614 | Ender 3 - Dual lead screw linear rail kit for Z axis. | <p><strong>Instructions</strong><br>Z axis linear rail kit for Ender3 style printers using dual Z lead screws. Rail mount is meant to be attached open side up. If you choose to use anti-backslash Z nuts, orient them upside down accordingly. Supports dual Z setup using only motor, belt synced or both at the same time. &... | [
"ender3",
"3dprinterparts",
"linearrail",
"dualzaxis"
] | 3D Printers > Creality Parts & Upgrades | [
"346614/images/image_1_compressed.jpg",
"346614/images/image_2_compressed.jpg",
"346614/images/image_3_compressed.jpg",
"346614/images/image_4_compressed.jpg",
"346614/images/image_5_compressed.jpg"
] | [
"346614/stls/Bearing spacer.stl",
"346614/stls/X axis - Stepper motor mount.stl",
"346614/stls/Z lead screw - rod guide _M3.stl",
"346614/stls/Z lead screw - Motor mount_M3.stl",
"346614/stls/Z lead screw - Spring lock_M3.stl",
"346614/stls/Z rail mount - 9H Dual screw setup_M3.stl",
"346614/stls/Z rai... | GPL3.0 | https://www.printables.com/model/346614 | data_0043.tar |
274473 | Ender 3 Adjustable Z motor mount | <p>I created this motor mount because I install ProperPrinting Dual z mod and the z leadscrew was binding and need adjustment, I made with the cutout on the back side for the easy assembly</p><p>Parts Needed</p><p>2x M3 8mm bolt</p><p>2x M4 20mm bolt</p><p>Printed with 0.4 nozzle 0.2 layer hight without supports <... | [
"motor",
"z"
] | 3D Printers > Creality Parts & Upgrades | [
"274473/images/image_1_compressed.jpg"
] | [
"274473/stls/motor mount.stl"
] | CC0 | https://www.printables.com/model/274473 | data_0043.tar |
1190120 | Ender 3 Cable Clips | <p>Remix from jn-gr's ribbon cable clip for the Ender 3 - <a href="https://www.thingiverse.com/thing:2880021">https://www.thingiverse.com/thing:2880021</a></p><p>The original clips are good but quite a loose fit and can be very difficult to get off if need be. These tweaks solve both issues and, as a bonus, you can use... | [
"psu",
"cable",
"clip",
"creality",
"ender",
"screen",
"clips",
"clean",
"ender3",
"organized",
"ender3pro"
] | 3D Printers > Creality Parts & Upgrades | [
"1190120/images/image_1_compressed.jpg",
"1190120/images/image_2_compressed.jpg",
"1190120/images/image_3_compressed.jpg",
"1190120/images/image_4_compressed.jpg",
"1190120/images/image_5_compressed.jpg"
] | [
"1190120/stls/CableClipExtra.stl",
"1190120/stls/CableClipExtra90.stl"
] | CC-BY | https://www.printables.com/model/1190120 | data_0043.tar |
162709 | Ender 3 Cables Holder (Anycubic, Alfawise, Geeetech, CR10) | [
"holder",
"cable",
"creality",
"ender",
"drive",
"anycubic",
"direct",
"directdrive",
"alfawise",
"u20",
"greetech"
] | 3D Printers > Anycubic Parts & Upgrades | [
"162709/images/image_1_compressed.jpg",
"162709/images/image_2_compressed.jpg",
"162709/images/image_3_compressed.jpg"
] | [
"162709/stls/ender-3-cable-holder.stl"
] | CC0 | https://www.printables.com/model/162709 | data_0043.tar | |
180151 | Ender 3 calibration files |
<p>Pre sliced g-code for the Ender 3 to help find ideal slicing settings. Everything is covered in detail here:</p>
<p>
<figure class="media">
<oembed url="https://youtu.be/3yIebnVjADM"></oembed>
</figure>
</p>
<p>These should be good to go for the Ender 3, as well as any other Marlin based printer that has a bed of... | [
"calibration",
"retraction",
"thingiverse",
"crealityender3",
"temperaturetower",
"speedtest"
] | 3D Printers > Test Models | [
"180151/images/image_1_compressed.jpg",
"180151/images/image_2_compressed.jpg",
"180151/images/image_3_compressed.jpg",
"180151/images/image_4_compressed.jpg"
] | [
"180151/stls/cube.stl",
"180151/stls/Teaching_Tech_speed_test.stl"
] | CC-BY | https://www.printables.com/model/180151 | data_0043.tar |
193982 | Ender 3 Camera Mount for Raspberry Pi Camera V2.1 |
<p>This is a remix of the @Codemonkey1973 version to remove the lettering on the flat piece</p>
Category: 3D Printer Accessories
| [
"thingiverse"
] | 3D Printers > Accessories | [
"193982/images/image_1_compressed.jpg",
"193982/images/image_2_compressed.jpg",
"193982/images/image_3_compressed.jpg"
] | [
"193982/stls/Back.stl",
"193982/stls/Camera_Bracket.stl",
"193982/stls/Front.stl"
] | CC-BY | https://www.printables.com/model/193982 | data_0043.tar |
264342 | Ender 3 Fan Duct "Red Squirrel" remix & Direct Drive Bracket |
<p>Modified the Red Squirrel fan duct to fit my needs :</p>
<ul>
<li>adjusted holes diameter to fit M3 screws better</li>
<li>made the 5015 fan holding arm and clamp thing beefier to not break when screwed</li>
<li>removed the top cable guide</li>
<li>added a bltouch mount</li>
</ul>
<p>See the picture, it's pretty ... | [
"fan",
"fanduct",
"duct",
"ender3",
"thingiverse",
"directdrive",
"bltouch",
"bltouchmount",
"directdriveextruder",
"trianglelab",
"minibmg"
] | 3D Printers > Accessories | [
"264342/images/image_1_compressed.jpg",
"264342/images/image_2_compressed.jpg",
"264342/images/image_3_compressed.jpg",
"264342/images/image_4_compressed.jpg",
"264342/images/image_5_compressed.jpg",
"264342/images/image_6_compressed.jpg"
] | [
"264342/stls/Direct_Drive_Bracket_MiniBMG.stl",
"264342/stls/Red_Squirrel_Base_lock.stl",
"264342/stls/Red_Squirrel_BLTouch_Mount.stl",
"264342/stls/Red_Squirrel_Clamp_remix.stl",
"264342/stls/Red_Squirrel_Fan_Grill.stl",
"264342/stls/Red_Squirrel_Fan_Housing_Duct_remix.stl"
] | CC-BY | https://www.printables.com/model/264342 | data_0043.tar |
236578 | ender 3 feet 35mm |
<p>the Difference is only the hight, these are higher than the original ones.</p>
<p>-->35mm <--</p>
<p>To be able to attach a 25mm fan at the bottom of the mainboard cover.</p>
<h3>Print Settings</h3>
<p><strong>Rafts:</strong></p>
<p>Doesn't Matter</p>
<p class="detail-setting supports"><strong>Supports: </s... | [
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"236578/images/image_1_compressed.jpg"
] | [
"236578/stls/ender_3_feet.stl"
] | CC-BY | https://www.printables.com/model/236578 | data_0043.tar |
216858 | Ender 3 Filament Guide Better End Clip | <p>This is a remix of: <a href="https://www.thingiverse.com/thing:3819008">https://www.thingiverse.com/thing:3819008</a></p><p>That endclip was the best I could find on Thingiverse, however it still lacked proper long attachment so it's weak-point was the surrounding of the screw hole. I made the other two arms longer ... | [
"ender3",
"thingiverse",
"crealityender3"
] | 3D Printers > Accessories | [
"216858/images/image_1_compressed.jpg"
] | [
"216858/stls/filament_guide_better_endclip.stl"
] | CC-BY | https://www.printables.com/model/216858 | data_0043.tar |
188055 | Ender 3 LCD + Raspberry Pi 2/3/4 Standalone Enclosure |
<p>I remixed the great LCD Enclosure design by eoyilmaz to make it standalone instead of mounted to the frame.</p>
<p>Make sure to check which version you need. The files are named accordingly.</p>
<p>Print with the back of the enclosure on the bed. The STLs should be in the orientation that works best for printing.... | [
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"188055/images/image_1_compressed.jpg",
"188055/images/image_2_compressed.jpg",
"188055/images/image_3_compressed.jpg",
"188055/images/image_4_compressed.jpg"
] | [
"188055/stls/Ender3_LCD_Case_Pi_2or3.stl",
"188055/stls/Ender3_LCD_Case_Pi_4.stl"
] | CC-BY | https://www.printables.com/model/188055 | data_0043.tar |
161720 | Ender 3 LCD cover | <p>Nothing special just a cover for Ender 3 style lcd display. The walls of similar prints were too thin for my preference. </p><p>Might be a little to long depending on the knob used on the display.</p><p>Nothing fancy or complicated.</p><p>I used 50% infill to but definitely isn't needed.</p><p>supports - NO</p>... | [] | 3D Printers > Creality Parts & Upgrades | [
"161720/images/image_1_compressed.jpg"
] | [
"161720/stls/cover ender3 lcd.stl"
] | CC0 | https://www.printables.com/model/161720 | data_0043.tar |
96740 | Ender 3 Max Bed Texture and model | <p>To Install:</p><p>Download Texture from : <a href="https://drive.google.com/file/d/10b57csAFIz1FoSvox-iZfo3S9uCKujZv/view?usp=sharing">https://drive.google.com/file/d/10b57csAFIz1FoSvox-iZfo3S9uCKujZv/view?usp=sharing</a></p><p>Go to Printer settings → bed shape (click button) → Load texture and model file</p> | [
"model",
"ender",
"3",
"buildplate",
"texture",
"max"
] | 3D Printers > Accessories | [
"96740/images/image_1_compressed.jpg",
"96740/images/image_2_compressed.jpg"
] | [
"96740/stls/ender3max_bedshape.stl"
] | CC-BY | https://www.printables.com/model/96740 | data_0043.tar |
244843 | Ender 3 MAX Front Electronics Box | <p>This is a remix of <a href="https://www.thingiverse.com/vinceformosa">Vince Formosa</a>'s Ender 3-MAX electronics box: <a href="https://www.thingiverse.com/thing:4916320">https://www.thingiverse.com/thing:4916320</a></p><p><strong>Description</strong></p><p>The original box is intended to clean up the look of your 3... | [
"lm2596",
"raspberrypi3",
"electronicsbox",
"crealityender3max",
"ender3max",
"ender3maxmod",
"skrminie3v2"
] | 3D Printers > Creality Parts & Upgrades | [
"244843/images/image_1_compressed.jpg",
"244843/images/image_2_compressed.jpg",
"244843/images/image_3_compressed.jpg"
] | [
"244843/stls/Control_Box_Remix_v2.stl",
"244843/stls/VF_4020mm_Fan_Cover.stl.stl",
"244843/stls/VF_4040_Cover.stl",
"244843/stls/VF_40mm_Fan_Cover.stl",
"244843/stls/VF_80mm_Fan_Cover.stl",
"244843/stls/VF_92mm_Fan_Cover.stl",
"244843/stls/VF_Vent_Cover.stl"
] | CC-BY | https://www.printables.com/model/244843 | data_0043.tar |
115477 | Ender 3 modular Hemera mount (no X build volume loss) |
<h3> Ender 3 compact mount for E3D Hemera</h3>
<ul>
<li>The aio mount version(recommend) will keep the x offset of nozzle unchange and maximum the X build size is 235mm. This version only use 3 m3x7mm button head bolts to mount the Hemera to the plate.</li>
<li>You will need to change the x build size to 220mm if yo... | [
"mount",
"e3d",
"creality",
"ender",
"thingiverse",
"hermes",
"hemera"
] | 3D Printers > Creality Parts & Upgrades | [
"115477/images/image_1_compressed.jpg",
"115477/images/image_2_compressed.jpg",
"115477/images/image_3_compressed.jpg",
"115477/images/image_4_compressed.jpg",
"115477/images/image_5_compressed.jpg",
"115477/images/image_6_compressed.jpg",
"115477/images/image_7_compressed.jpg",
"115477/images/image_8... | [
"115477/stls/4020-fan-duct-bltouch-front-mount.stl",
"115477/stls/4020-fan-duct-bltouch-side-mount.stl",
"115477/stls/4020-fan-duct.stl",
"115477/stls/another-duct-washer.stl",
"115477/stls/another-duct.stl",
"115477/stls/bearmera_5015-fan-adapter.stl",
"115477/stls/bearmera_5015_nozzle_fan_duct.stl",
... | CC-BY | https://www.printables.com/model/115477 | data_0043.tar |
408051 | Ender 3 modular X endstop cover (for limit switch and sensorless!) | <p>Use this replacement X endstop cover to more securely hold cameras, lights, cables, whatever! You need 12 M3 heat-set inserts (mine are 4.5mmx5mm) and the rest of the hardware comes from your existing endstop cover. <br><br>Print in whatever you want, but I recommend PETG, ABS, ASA, or similar (the motor gets h... | [
"ender3",
"heatsetinsert",
"crealityender3",
"ender3v2"
] | 3D Printers > Creality Parts & Upgrades | [
"408051/images/image_1_compressed.jpg",
"408051/images/image_2_compressed.jpg",
"408051/images/image_3_compressed.jpg",
"408051/images/image_4_compressed.jpg",
"408051/images/image_5_compressed.jpg"
] | [
"408051/stls/LimitSwitchEndstop.stl",
"408051/stls/SensorlessEndstop.stl"
] | CC-BY | https://www.printables.com/model/408051 | data_0043.tar |
243361 | Ender 3 Multi-Speed Knob | <p>Knob has 3 "layers", one larger gear at the bottom for fine movements, the middle one is great for quicker and the small top for quickest (ie moving Z axis or extruder). The largest is near the same size as the stock E3 Knob but the smallest is near a pencil size. Has beveled edges on the gears teeth so its no... | [
"knob",
"ender",
"lcdknob",
"crealityender3pro"
] | 3D Printers > Creality Parts & Upgrades | [
"243361/images/image_1_compressed.jpg"
] | [
"243361/stls/KNOB.stl"
] | CC-BY | https://www.printables.com/model/243361 | data_0043.tar |
290516 | Ender 3 Nozzle Brush Mount | <p>Here's a nozzle brush that you can friction mount to your Ender 3. I found and modified a Klipper script here: <a href="https://github.com/VoronDesign/VoronUsers/blob/master/abandoned_mods/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_%26_Nozzle_Scrubber/Macros/nozzle_scrub.cfg">https://github.com/VoronDesign... | [
"mount",
"arm",
"nozzle",
"creality",
"ender",
"brush",
"clean",
"klipper"
] | 3D Printers > Creality Parts & Upgrades | [
"290516/images/image_1_compressed.jpg",
"290516/images/image_2_compressed.jpg"
] | [
"290516/stls/Brush Arm.stl"
] | CC0 | https://www.printables.com/model/290516 | data_0043.tar |
254908 | Ender 3 pen plotter | <p>print time: 40min</p><p>print settings: 0,28mm SUPERDRAFT</p><p>cost: 1,7m</p><p>supports: needed</p><p>infill: 15% </p><p>bolt: M3x16 (2x)</p><p>nut: M3x2 (2x)</p> | [
"pen",
"ender",
"penplotter",
"plotter",
"pcb",
"ender3",
"crealityender3",
"scalpel",
"pcbprint",
"lastmeters"
] | 3D Printers > Creality Parts & Upgrades | [
"254908/images/image_1_compressed.jpg",
"254908/images/image_2_compressed.jpg"
] | [
"254908/stls/ender 3 pen adapter.stl"
] | CC0 | https://www.printables.com/model/254908 | data_0043.tar |
74003 | Ender 3 Pro Linear Rail Conversion | <p>UPDATE 1/3/2023: This design will fail over time. The stress of the Z screws not being under the weight of the carriage makes the Z rails act as a pivot point and the plastic will wear down over time. I have been working on a complete overhaul of this design and hope to have it out for Beta testing by March 2023.&nb... | [
"creality",
"ender",
"ender3",
"thingiverse",
"crealityender3",
"linearrail",
"ender3pro"
] | 3D Printers > Creality Parts & Upgrades | [
"74003/images/image_1_compressed.jpg",
"74003/images/image_10_compressed.jpg",
"74003/images/image_11_compressed.jpg",
"74003/images/image_12_compressed.jpg",
"74003/images/image_13_compressed.jpg",
"74003/images/image_14_compressed.jpg",
"74003/images/image_15_compressed.jpg",
"74003/images/image_16_... | [
"74003/stls/EVA_Endstop_Plug_Extended.stl",
"74003/stls/Tensioner_knob.stl",
"74003/stls/X Axis Motor Mount Single Piece.stl",
"74003/stls/X Axis Tensioner Side.stl",
"74003/stls/X_Axis_Belt_Tensioner_Idler.stl",
"74003/stls/Y_Axis_Belt_Grabber.stl",
"74003/stls/Y_Axis_Limit_Switch_Mount.stl",
"74003/... | CC-BY | https://www.printables.com/model/74003 | data_0043.tar |
347733 | Ender 3 Pro Nozzle Wipe Attachment | <h4>Brush:</h4><p>I used a cheap harbor freight brass brush and cut the handle off. Don't use a bristle type that is harder than your nozzle, aka steel brush with brass nozzle.</p><p> </p><h4>Notes:</h4><p>You will need to slide your display over to accommodate the holder, you can either relocate the display or si... | [] | 3D Printers > Creality Parts & Upgrades | [
"347733/images/image_1_compressed.jpg",
"347733/images/image_2_compressed.jpg",
"347733/images/image_3_compressed.jpg",
"347733/images/image_4_compressed.jpg",
"347733/images/image_5_compressed.jpg",
"347733/images/image_6_compressed.jpg",
"347733/images/image_7_compressed.jpg"
] | [
"347733/stls/Nozzle_Wipe_v1.stl"
] | CC-BY | https://www.printables.com/model/347733 | data_0043.tar |
188449 | Ender 3 Pro Power Supply PSU 80mm Fan Cover |
<p>I modified this PSU cover to fit an 80mm fan bolted to the outside.</p>
<p>Any 12V fan will work since the PSU fan is already a 12V fan. You can either replace the connector on the 80mm fan with the old fan connector or replace the connector with a JST connector (https://www.amazon.com/Qibaok-Crimping-Ratcheting-... | [
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"188449/images/image_1_compressed.jpg",
"188449/images/image_2_compressed.jpg"
] | [
"188449/stls/Ender_3_Pro_PSU_Cover_-_80mm_v2.stl"
] | CC-BY | https://www.printables.com/model/188449 | data_0043.tar |
951343 | Ender 3 Pro Speedy Benchy | <p>My ender 3 Pro</p><p>-Dual Z<br>-Sprite Extruder<br>-Cr Touch<br>-Light Bar<br>-Klipper on Rpi 4B<br>-X Linear Rail<br>-BTT SKR Mini E3 V3<br>-Input Shaping With The BTT ADXL345 V2</p> | [] | 3D Printers > Test Models | [
"951343/images/image_1_compressed.jpg",
"951343/images/image_2_compressed.jpg"
] | [
"951343/stls/SpeedBenchy.stl"
] | CC0 | https://www.printables.com/model/951343 | data_0043.tar |
248391 | Ender 3 Pro Y Axis Tencioner Max Y Travel Mod |
<p>I have made this remix becouse when i installed Hero Me Gen 5 fan duct i needed to move my Y axis end stop about 9 mm.</p>
<p>Becouse of that, there was a risk of crashing the table mount plate with the tencioner body.</p>
<p>My remix fixes that problem and allows the table to use maximum Y travel possible.</p>
<... | [
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"248391/images/image_1_compressed.jpg",
"248391/images/image_2_compressed.jpg",
"248391/images/image_3_compressed.jpg"
] | [
"248391/stls/Tencioner_Body.stl",
"248391/stls/Tencioner_Nut.stl",
"248391/stls/Tencioner_Screw.stl"
] | CC-BY | https://www.printables.com/model/248391 | data_0043.tar |
356433 | Ender 3 pro/S1 pro feet - Reducing noise and are anti vibrating | <p>Nice and soft feet for your Creality ender 3 pro or Creality ender 3 s1 pro. This is version 3 of 5. This is the best of the feet I made. </p><p>I used: </p><p>TPU98A medium soft infill 10%. </p><p>TPU 85A soft 20% infill.</p><p>Nozzle 0.4mm</p><p>Layer height 0,2mm</p><p>Do not need support for this ... | [
"creality",
"ender",
"pro",
"ender3",
"crealityender3pro",
"ender3s1pro"
] | 3D Printers > Creality Parts & Upgrades | [
"356433/images/image_1_compressed.jpg",
"356433/images/image_2_compressed.jpg",
"356433/images/image_3_compressed.jpg",
"356433/images/image_4_compressed.jpg"
] | [
"356433/stls/Foot rounded.stl"
] | CC-BY | https://www.printables.com/model/356433 | data_0043.tar |
233052 | Ender 3 Pro/V2 NEO LGX Lite Mount | <p>Update 6/30/23. Added an experimental and untested version meant to be compatible with the Ender 3 V2 Neo. The holes relating to the extruder motor are moved 21mm to the side. Let me know if it works!</p><p> </p><p>Update 7/7/22. Added a beefier mount to prevent some bending on retractions. Also added some gene... | [
"bondtech",
"ender3pro",
"bondtechlgxlite",
"ender3v2neo"
] | 3D Printers > Creality Parts & Upgrades | [
"233052/images/image_1_compressed.jpg",
"233052/images/image_2_compressed.jpg",
"233052/images/image_3_compressed.jpg",
"233052/images/image_4_compressed.jpg",
"233052/images/image_5_compressed.jpg",
"233052/images/image_6_compressed.jpg",
"233052/images/image_7_compressed.jpg",
"233052/images/image_8... | [
"233052/stls/Beefy LGX Lite Mount E3 PRO.stl",
"233052/stls/LGX Lite Mount E3V2 NEO Experimental.stl",
"233052/stls/LGX Lite Mount Spacer.stl",
"233052/stls/V3 LGX Lite Mount.stl"
] | CC-BY | https://www.printables.com/model/233052 | data_0043.tar |
293656 | Ender 3 S1 gluestick holder | [
"holder",
"creality",
"glueholder",
"ender3s1"
] | 3D Printers > Creality Parts & Upgrades | [
"293656/images/image_1_compressed.jpg"
] | [
"293656/stls/Ender 3 S1 gluestick holder.stl"
] | CC0 | https://www.printables.com/model/293656 | data_0043.tar | |
172815 | Ender 3 S1 Pi Camera mount | <p>Use with this camera case: <a href="https://www.thingiverse.com/thing:3114849">https://www.thingiverse.com/thing:3114849</a></p><p>PLA</p><p>15% Infill</p><p>No Supports Needed</p><p>Added individual files.</p> | [
"raspberrypicamera",
"ender3s1"
] | 3D Printers > Creality Parts & Upgrades | [
"172815/images/image_1_compressed.jpg",
"172815/images/image_2_compressed.jpg",
"172815/images/image_3_compressed.jpg",
"172815/images/image_4_compressed.jpg"
] | [
"172815/stls/Copy of Ender3S1 Pi_Mount.stl",
"172815/stls/Ender3S1 Pi Mount_Ball.stl",
"172815/stls/Ender3S1 Pi Mount_Nut.stl"
] | CC-BY | https://www.printables.com/model/172815 | data_0043.tar |
415461 | Ender 3 S1 Pro Gridfinity Base Screen Mount | <p>Mount to attach (any size) Gridfinity base to where the screen normally is on stock ender 3 s1 pro. I don't use the screen so this is perfect for me. This model does not include the actual grdfinity base as I wanted it to be modular to accept different sizes of bases. Just attach a gridfinity base ... | [
"ender",
"base",
"pro",
"s1",
"gridfinity",
"ender3s1pro"
] | 3D Printers > Creality Parts & Upgrades | [
"415461/images/image_1_compressed.jpg",
"415461/images/image_2_compressed.jpg",
"415461/images/image_3_compressed.jpg",
"415461/images/image_4_compressed.jpg"
] | [
"415461/stls/JC-enderS1SideMount.stl"
] | CC-BY | https://www.printables.com/model/415461 | data_0043.tar |
354475 | Ender 3 S1 Pro nozzle brush holder | <p>A bracket to hold a generic brush for cleaning the nozzle on an Ender 3 S1 Pro nozzle brush holder. Replaces the bed handle. and needs 2 longer bolts</p><p> </p><p>You have to modify your G code to use it</p> | [
"ender3s1",
"ender3s1pro"
] | 3D Printers > Creality Parts & Upgrades | [
"354475/images/image_1_compressed.jpg",
"354475/images/image_2_compressed.jpg"
] | [
"354475/stls/Ender3s1Pro_Brush_holder.stl"
] | CC-BY | https://www.printables.com/model/354475 | data_0043.tar |
511396 | Ender 3 S1 Pro Tray | <p>This is a remix from the Ender 3 S1 Pro Tray Insert by turbett1. Please check out his awesome original here: https://www.thingiverse.com/thing:5393379</p><p>I wanted to simplify the compartments to not be as limiting. But I also added a few features which I like.</p><p>• Fillets on some bottom edges to help get thin... | [
"thingiverse",
"turbett1"
] | 3D Printers > Accessories | [
"511396/images/image_1_compressed.jpg",
"511396/images/image_2_compressed.jpg",
"511396/images/image_3_compressed.jpg"
] | [
"511396/stls/Tool_Tray.stl"
] | CC-BY | https://www.printables.com/model/511396 | data_0043.tar |
362795 | Ender 3 S1 ribbon cable holder front of z-axis | <p>remix of <a href="https://www.printables.com/model/328521-ender-3-s1-ribbon-cable-holder">https://www.printables.com/model/328521-ender-3-s1-ribbon-cable-holder</a></p><p> </p><p> </p> | [
"holder",
"cable",
"ender",
"ribbon",
"s1"
] | 3D Printers > Creality Parts & Upgrades | [
"362795/images/image_1_compressed.jpg"
] | [
"362795/stls/Cable_clip_Ender-3_S1_prov1.stl"
] | CC-BY | https://www.printables.com/model/362795 | data_0043.tar |
179318 | Ender 3 s1 Scraper and snip holder | <p>Scraper and snips holder for Creality Ender 3 S1. Attaches to the top of the gantry between the screws on either side. Nice fit with no play. May limit how tall of a piece you can print without removing the tools.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-set... | [
"thingiverse",
"ender3s1"
] | 3D Printers > Accessories | [
"179318/images/image_1_compressed.jpg",
"179318/images/image_2_compressed.jpg",
"179318/images/image_3_compressed.jpg",
"179318/images/image_4_compressed.jpg"
] | [
"179318/stls/Ender-3_S1_Tool_Holder.stl",
"179318/stls/Scraper_holder_nut.stl"
] | CC-BY | https://www.printables.com/model/179318 | data_0043.tar |
381751 | Ender 3 s1/Sprite pro better fan snout and relocation | <p>New fan shroud I designed to allow for the best airflow to the nozzle and be adjustable for volcano/non volcano setups. This allows for the use of the existing lower screw that used to be to hold the fan in place and now be used as a position adjustment screw.</p><p> </p><p>Printed in PETG 230c 65c, .2 layer he... | [
"prusa",
"creality",
"ender",
"fan",
"fanshroud",
"ender3",
"sprite",
"spritepro",
"enders1",
"spriteproextruder",
"crealitys1",
"fanmodification"
] | 3D Printers > Creality Parts & Upgrades | [
"381751/images/image_1_compressed.jpg",
"381751/images/image_2_compressed.jpg",
"381751/images/image_3_compressed.jpg",
"381751/images/image_4_compressed.jpg"
] | [
"381751/stls/Revised Sprite Pro Nozzle Snout Proto v1.5 with support blockers.stl",
"381751/stls/Sprite Pro Proto v1.4.stl"
] | CC-BY | https://www.printables.com/model/381751 | data_0043.tar |
212049 | Ender 3 Side-Mount Filament Adapter |
<p>Mount your filament spool at the bottom left side of your printer. This bracket is very sturdy and gives your filament a very direct path into the extruder.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Ender... | [
"filament",
"filamentspoolholder",
"creality",
"filamentspool",
"ender3",
"thingiverse",
"ender3pro"
] | 3D Printers > Accessories | [
"212049/images/image_1_compressed.jpg",
"212049/images/image_2_compressed.jpg"
] | [
"212049/stls/Ender3_Bracket.stl"
] | CC-BY | https://www.printables.com/model/212049 | data_0043.tar |
232691 | Ender 3 Snips Holder | <p>This is my minimalist version of an Ender 3 Tool holder for the snips (aka filament cutters) — the tool I use most with my 3D printer. It holds the cutters handle-side up so they are easy to grab and close at hand. This uses the standard rail insert and is a quick, easy print.</p>
<p>This solo tool holder design was... | [
"toolholder",
"ender3",
"thingiverse",
"crealityender3",
"snips",
"ender3pro",
"flushcutter",
"ender3v2",
"ender3toolholder"
] | 3D Printers > Accessories | [
"232691/images/image_1_compressed.jpg",
"232691/images/image_2_compressed.jpg",
"232691/images/image_3_compressed.jpg",
"232691/images/image_4_compressed.jpg",
"232691/images/image_5_compressed.jpg",
"232691/images/image_6_compressed.jpg"
] | [
"232691/stls/Ender3_Snips_Holder_v2.stl"
] | CC-BY | https://www.printables.com/model/232691 | data_0043.tar |
247910 | Ender 3 Spool Guide Support | <p>just orientate and print</p><p>4-5 walls recommended with high infil</p> | [] | 3D Printers > Accessories | [
"247910/images/image_1_compressed.jpg"
] | [
"247910/stls/spool_guide.stl",
"247910/stls/Spool_Holder v1.stl"
] | CC-BY | https://www.printables.com/model/247910 | data_0043.tar |
192475 | Ender 3 Spool Holder two bearings |
<p>simple spool holder, two bearings on each side, work out great.</p>
Category: 3D Printer Accessories
| [
"spoolholder",
"filamentspoolholder",
"filamentspool",
"bearing",
"608bearing",
"filamentholder",
"ender3",
"thingiverse",
"bearingholder",
"crealityender3"
] | 3D Printers > Accessories | [
"192475/images/image_1_compressed.jpg",
"192475/images/image_2_compressed.jpg",
"192475/images/image_3_compressed.jpg",
"192475/images/image_4_compressed.jpg",
"192475/images/image_5_compressed.jpg"
] | [
"192475/stls/Ender_3_Spool_Holder.stl"
] | CC-BY | https://www.printables.com/model/192475 | data_0043.tar |
517222 | Ender 3 stealthburner mount | <p>Its a remix of Stealthburner for Ender 3 by Taddesh on thingy… it no longer has the tabs for the x axis roller bolts. so its easier to install/ remove without taking the whole x carriage apart. I cut the tabs on the one but tabbesh with my filament snips.. figureed out it works well with out them. So I edited his mo... | [
"ender",
"ender3",
"stealthburner"
] | 3D Printers > Creality Parts & Upgrades | [
"517222/images/image_1_compressed.jpg",
"517222/images/image_2_compressed.jpg",
"517222/images/image_3_compressed.jpg",
"517222/images/image_4_compressed.jpg"
] | [
"517222/stls/Ender 3 stealthburner mount v1.2.stl",
"517222/stls/Ender 3 stealthburner mount.stl"
] | GPL2.0 | https://www.printables.com/model/517222 | data_0043.tar |
183228 | Ender 3 Top Mount Extruder Bracket |
<p>A bracket to relocate the Ender 3 extruder to the top frame. Also includes a filler/wiring bracket for the hole left in the original extruder bracket and extrusion slot covers to protect the wiring.</p>
<p>You will need 4 t-nuts, screws, flat and lock washers to mount the bracket to the frame. Original hardware m... | [
"extruder",
"ender",
"thingiverse",
"relocate"
] | 3D Printers > Accessories | [
"183228/images/image_1_compressed.jpg",
"183228/images/image_2_compressed.jpg",
"183228/images/image_3_compressed.jpg",
"183228/images/image_4_compressed.jpg",
"183228/images/image_5_compressed.jpg",
"183228/images/image_6_compressed.jpg",
"183228/images/image_7_compressed.jpg",
"183228/images/image_8... | [
"183228/stls/Ender_3_Extruder_Filler.stl",
"183228/stls/Ender_3_Extruder_Top_Mount_Bracket.stl",
"183228/stls/Ender_3_Extrusion_Slot_Cover.stl"
] | CC-BY | https://www.printables.com/model/183228 | data_0043.tar |
391176 | ender 3 v2 bed handle | <p>ignore the image i just put a random one for printables.com to accept it</p> | [] | 3D Printers > Creality Parts & Upgrades | [
"391176/images/image_1_compressed.jpg"
] | [
"391176/stls/ender 3 v2 bed handle(remix).stl"
] | CC0 | https://www.printables.com/model/391176 | data_0043.tar |
69705 | Ender 3 v2 bed handle embossed logo | <p>This is an embossed version of my engraved remix <a href="https://www.thingiverse.com/thing:4785576">https://www.thingiverse.com/thing:4785576</a></p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3</p></d... | [
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"69705/images/image_1_compressed.jpg",
"69705/images/image_2_compressed.jpg"
] | [
"69705/stls/Ender_Bed_Handle_-_Embossed.stl"
] | CC-BY | https://www.printables.com/model/69705 | data_0043.tar |
206774 | Ender 3 v2 Direct Drivinator - snap-on | <p>I wanted to test a simple direct drive upgrade to my Ender 3 v2 without the need to disassemble my x-carriage. Madau3D model at <a href="https://www.thingiverse.com/thing:3589452">https://www.thingiverse.com/thing:3589452</a> seemed about right, I just made a simple change to make it snap on the rollers. It worked n... | [
"ender3",
"ender3directdrive",
"directdrivinator"
] | 3D Printers > Creality Parts & Upgrades | [
"206774/images/image_1_compressed.jpg",
"206774/images/image_2_compressed.jpg"
] | [
"206774/stls/Direct drive ender.stl"
] | GPL2.0 | https://www.printables.com/model/206774 | data_0043.tar |
198643 | Ender 3 V2 Extruder Knob Lever |
<p>This is lever insert for the stock Extruder knob.</p>
<p>Helps spin it quickly when feeding filament.</p>
<p>The lever support is a press fit in one of the cavities and the lever spins freely.</p>
<p>I have inserted a small nail in the lever to give it extra strength.</p>
<p>Just heat it slightly and push into th... | [
"thingiverse"
] | 3D Printers > Accessories | [
"198643/images/image_1_compressed.jpg",
"198643/images/image_2_compressed.jpg"
] | [
"198643/stls/Ender_3_V2_Extruder_Knob_Lever_Lever.stl",
"198643/stls/Ender_3_V2_Extruder_Knob_Lever_Support.stl"
] | CC-BY | https://www.printables.com/model/198643 | data_0043.tar |
274805 | Ender 3 V2 Extrusion Drawer Improved | <p>Combined two models into one and cut off inserts into frame.</p> | [] | 3D Printers > Creality Parts & Upgrades | [
"274805/images/image_1_compressed.jpg",
"274805/images/image_2_compressed.jpg"
] | [
"274805/stls/Drawer_-_Ender_3_V2_v21 v1.stl"
] | CC0 | https://www.printables.com/model/274805 | data_0043.tar |
282507 | Ender 3 V2 Filament Spool 100% 3d Printed | <p>Done as a for fun project to have a 100% 3d printed filament spool. Worked much better than expected so decided to share.</p><p>Print two bearings and one each of the other parts. Fits on the stock Ender 3 V2 filament spool bracket.</p><p>0.20mm or smaller layer height suggested for bearings and threaded parts, the ... | [
"filamentspool",
"bearing",
"thread"
] | 3D Printers > Creality Parts & Upgrades | [
"282507/images/image_1_compressed.jpg",
"282507/images/image_2_compressed.jpg"
] | [
"282507/stls/Filament Spool - Bearing-2.stl",
"282507/stls/Filament Spool - Mounting Nut-1.stl",
"282507/stls/Filament Spool - Mounting Shaft-1.stl",
"282507/stls/Filament Spool - Retaining Nut-1.stl",
"282507/stls/Filament Spool - Spool-1.stl"
] | CC-BY | https://www.printables.com/model/282507 | data_0043.tar |
832645 | Ender 3 V2 Neo Filament Guide with Roller | <p>Remixed Tomaskom_cz's design to work with my Ender 3 V2 Neo. Slides into the top rail and is a little longer than the original design.</p>
<h3>Print Settings</h3>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-setting supports"><strong>Supports: </strong>
<div><p>No</p></div>
<p><strong>Resolution:</stron... | [
"thingiverse"
] | 3D Printers > Accessories | [
"832645/images/image_1_compressed.jpg",
"832645/images/image_2_compressed.jpg",
"832645/images/image_3_compressed.jpg",
"832645/images/image_4_compressed.jpg",
"832645/images/image_5_compressed.jpg",
"832645/images/image_6_compressed.jpg"
] | [
"832645/stls/Axis-FilamentGuide_Roller.stl",
"832645/stls/Base_Remix-FilamentGuide_Roller.stl",
"832645/stls/Roller-FilamentGuide_Roller.stl"
] | CC-BY | https://www.printables.com/model/832645 | data_0043.tar |
201536 | Ender 3 v2 Rear Mount Spool Holder |
<p>A side-mounted rear-facing spool holder bracket. This slides onto the lower left rear extrusion into the v-slots and faces backwards. The original spool holder bolts to the top and the spool sits on the outside of the machine.</p>
<p>I've been using various iterations of this model for a couple of weeks now and t... | [
"thingiverse",
"ender3v2",
"crealityender3v2",
"vslotmount"
] | 3D Printers > Creality Parts & Upgrades | [
"201536/images/image_1_compressed.jpg",
"201536/images/image_2_compressed.jpg",
"201536/images/image_3_compressed.jpg",
"201536/images/image_4_compressed.jpg",
"201536/images/image_5_compressed.jpg",
"201536/images/image_6_compressed.jpg",
"201536/images/image_7_compressed.jpg"
] | [
"201536/stls/Rear_Mount_Gantry_60_v2.stl",
"201536/stls/Rear_Mount_Gantry_v3_meshed.stl"
] | CC-BY | https://www.printables.com/model/201536 | data_0043.tar |
292587 | Ender 3 V2 Temp Tower PETG | <p>Included is a ready-made gcode for Ender 3 V2 temp tower for PETG. </p><p>E-Steps are set for my extruder, change line 21 in G-Code to your extruder's E-Steps.</p><p>Comment out line 20 if you don't have BLTouch/CRTouch.</p> | [
"temp",
"temperature",
"petg",
"gcode",
"temptower"
] | 3D Printers > Test Models | [
"292587/images/image_1_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/292587 | data_0043.tar |
264431 | Ender 3 v2 TR8x8 z axis nut | <p>Pitch 8, lead 2. I designed this because I haven't find any model that will fit my printer. I am using this and testing for one week and still works good. I printed this in PLA and PETG. I recommend PETG. V4 is a little loose and I think print this just for replacement your wear out brass nut not like upgrade. V11 i... | [
"upgrade",
"creality",
"ender",
"screw",
"lead",
"ender3",
"zaxis",
"leadscrew",
"trapezoidal",
"trapezoidalnut",
"ender3v2"
] | 3D Printers > Creality Parts & Upgrades | [
"264431/images/image_1_compressed.jpg",
"264431/images/image_2_compressed.jpg"
] | [
"264431/stls/scre v11_0.08mmheight.stl",
"264431/stls/scre v4_0.2mmheight.stl"
] | CC-BY | https://www.printables.com/model/264431 | data_0043.tar |
326487 | Ender 3 V2 Y Tensioner and Stepper Mount Linear Rail Belt Clearance Mod | <p>I installed a linear rail kit with a rail mounted to the top of the y extrusion. This caused the belt to angle up and rub against the stock Y tensioner and the belt hole for the Y stepper mount. </p><p>There are models that I made to replicate the stock parts and models which have additional clearance ad... | [] | 3D Printers > Creality Parts & Upgrades | [
"326487/images/image_1_compressed.jpg",
"326487/images/image_2_compressed.jpg"
] | [
"326487/stls/y-stepper-mount-modified-m3-heat-insert.stl",
"326487/stls/y-stepper-mount-modified-m3-tap.stl",
"326487/stls/y-stepper-mount-stock-m3-heat-insert.stl",
"326487/stls/y-stepper-mount-stock-m3-tap.stl",
"326487/stls/y-tensioner-modified.stl",
"326487/stls/y-tensioner-stock.stl"
] | CC0 | https://www.printables.com/model/326487 | data_0043.tar |
1442668 | Ender 3 V3 SE - Retenedor bobina de filamento - Filament spool stopper | <p>This simple spool stopper is designed specifically for the Ender 3 V3 SE and solves that annoying wobble during prints.</p><p>Function: stabilizes the spool to prevent front-to-back movement.<br>Installation: fits directly onto the stock holder, no screws or modifications needed.<br>Optimized design: tight fit, stro... | [
"maker",
"spool",
"creality",
"ender",
"pla",
"stopper",
"petg",
"improvement",
"ender3",
"bobinafilamento",
"retenedor",
"ender3v3se",
"mejoras"
] | 3D Printers > Creality Parts & Upgrades | [
"1442668/images/image_1_compressed.jpg",
"1442668/images/image_2_compressed.jpg",
"1442668/images/image_3_compressed.jpg"
] | [
"1442668/stls/retenedor bovina filamento.stl"
] | CC-BY | https://www.printables.com/model/1442668 | data_0043.tar |
840905 | Ender 3 v3 SE Adapter for Articulating Raspberry Pi Camera Mount System | <p>An adapter so you can use @Sneaks great<a href="https://www.printables.com/model/3407-articulating-raspberry-pi-camera-mount-for-prusa-m"> articulating camera system</a> with the Ender 3 v3 SE. It connects to the gantry allowing you to keep the nozzle center frame in camera as the printhead rises. Also it creates a ... | [
"camera",
"mount",
"ender",
"adapter",
"raspberry",
"pi",
"module",
"raspberrypi",
"raspberrypicamera",
"v3",
"ender3v3se",
"ke"
] | 3D Printers > Creality Parts & Upgrades | [
"840905/images/image_1_compressed.jpg",
"840905/images/image_2_compressed.jpg",
"840905/images/image_3_compressed.jpg",
"840905/images/image_4_compressed.jpg"
] | [
"840905/stls/ender 3v3 se camera adapter.stl"
] | CC-BY | https://www.printables.com/model/840905 | data_0043.tar |
1293501 | Ender 3 V3 SE cooling duct (Prusa MK4s) | <p>EN:</p><p>The idea is taken from (<a href="https://makerworld.com/en/models/698076-mk4s-fan-duct-for-ender3-v3-se">https://makerworld.com/en/models/698076-mk4s-fan-duct-for-ender3-v3-se</a>). The original Prusa MK4S parts were modified. The bracket was redesigned from scratch.</p><p>Compatible with printers that hav... | [] | 3D Printers > Creality Parts & Upgrades | [
"1293501/images/image_1_compressed.jpg",
"1293501/images/image_2_compressed.jpg",
"1293501/images/image_3_compressed.jpg",
"1293501/images/image_4_compressed.jpg",
"1293501/images/image_5_compressed.jpg"
] | [
"1293501/stls/Bracket.stl",
"1293501/stls/Duct.stl",
"1293501/stls/Fan base.stl"
] | GPL2.0 | https://www.printables.com/model/1293501 | data_0043.tar |
958424 | Ender 3 V3 SE Nebula Mount | <p>I didn't like the existing model, so I created a new one based on the stock screen mount.</p><p>Existing model :<br><a href="https://www.printables.com/model/898630-ender-3-v3-se-nebula-mount">https://www.printables.com/model/898630-ender-3-v3-se-nebula-mount</a><br> </p><p>Printing Conditions :<br>· Print-in p... | [
"nebula",
"nebulapad",
"nebulaholder",
"nebulamount",
"nebulapadmount"
] | 3D Printers > Creality Parts & Upgrades | [
"958424/images/image_1_compressed.jpg"
] | [
"958424/stls/nebula pad mount.stl"
] | CC-BY | https://www.printables.com/model/958424 | data_0043.tar |
50985 | Ender 3 X Axis Logo Cap | <p>I wasn't a fan of the QR code on the printer. A few remixes later, and I had this part.</p>
<p>After removing the QR code (it's just a sticker and it came right off), I applied a little glue from a glue stick (I know you have one laying around, you're a maker!) and snapped it into place.</p>
| [
"logo",
"cap",
"cover",
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"50985/images/image_1_compressed.jpg",
"50985/images/image_2_compressed.jpg"
] | [
"50985/stls/e3_xaxis_cap-dragonlogo.stl"
] | CC-BY | https://www.printables.com/model/50985 | data_0043.tar |
83128 | Ender 3 Z Axis Aperture Knob |
<p>Made a Knob for the Z-Axis to match the one for the extruder.</p>
<p>Updates:</p>
<p>04/03/2019: Reduced the object by 6% for a better fit on the Z-rod. Still loose but since I only use it to see if the Z-rod is turning, it works for my purpose.</p>
Category: 3D Printer Accessories
| [
"ender",
"ender3",
"zaxis",
"thingiverse",
"aperturescience",
"aperturesciencelogo",
"aperturelabs"
] | 3D Printers > Accessories | [
"83128/images/image_1_compressed.jpg",
"83128/images/image_2_compressed.jpg",
"83128/images/image_3_compressed.jpg",
"83128/images/image_4_compressed.jpg",
"83128/images/image_5_compressed.jpg",
"83128/images/image_6_compressed.jpg"
] | [
"83128/stls/Aperture_Z-Axis_Knob.stl"
] | CC-BY | https://www.printables.com/model/83128 | data_0043.tar |
55268 | Ender 3 Z endstop mount | <p>Creality Ender 3 Z endstop mount<br/>
Created in Fusion 360 with measurements from the Z endstop mount on my Ender 3 V2 and wanted to have a spare "just in case"</p>
| [
"ender3",
"crealityender3",
"zstop",
"ender3v2",
"crealityender3v2"
] | 3D Printers > Creality Parts & Upgrades | [
"55268/images/image_1_compressed.jpg",
"55268/images/image_2_compressed.jpg"
] | [
"55268/stls/ender_3_z_endstop_mount.stl"
] | CC-BY | https://www.printables.com/model/55268 | data_0043.tar |
306177 | Ender 3V2 Z-axis spindle brace | <p>This part needs no screws, it just sits on the top extrusion of the Ender 3V2 frame.</p><p>It fits one ball bearing with outer diameter 24 mm and inner diameter 8 mm, for example SS-628-ZZ</p><p>Print it the same orientation it will sit on the frame, the overhang should not need any supports for printing.</p> | [
"upgrade",
"creality",
"nosupportsneeded",
"ender3v2"
] | 3D Printers > Creality Parts & Upgrades | [
"306177/images/image_1_compressed.jpg",
"306177/images/image_2_compressed.jpg",
"306177/images/image_3_compressed.jpg"
] | [
"306177/stls/z_spindle_brace.stl"
] | CC-BY | https://www.printables.com/model/306177 | data_0043.tar |
375403 | Ender 3/CR 10 Dial Gauge Gantry Mounts for Z and X Calibration | <p>Remixed from ‘Creality CR10 Dial Gauge mount for precise bed leveling’ by kcmj</p><p>This remix extends the arms of the original Z-axis calibration mount to accomodate an M8 thumbscrew for a more secure fit, and an M5 thumbscrew to connect the dial gauge. Also added is an additional bracket for X-axis calibration th... | [
"cr10",
"ender3",
"dialgauge",
"gantry",
"dialgaugemount",
"dialgaugeholder"
] | 3D Printers > Accessories | [
"375403/images/image_1_compressed.jpg",
"375403/images/image_2_compressed.jpg",
"375403/images/image_3_compressed.jpg",
"375403/images/image_4_compressed.jpg",
"375403/images/image_5_compressed.jpg",
"375403/images/image_6_compressed.jpg",
"375403/images/image_7_compressed.jpg",
"375403/images/image_8... | [
"375403/stls/Dial_Gauge_Calibration_2020_Gantry_Bracket_M5_Head_Cap.stl",
"375403/stls/Dial_Gauge_Calibration_2020_Gantry_Bracket_M5_Thumbscrew.stl",
"375403/stls/Dial_Gauge_Calibration_2020_Gantry_Bracket_M8_Head_Cap.stl",
"375403/stls/Dial_Gauge_Calibration_2020_Gantry_Bracket_M8_Head_Thumbscrew.stl",
"37... | CC-BY | https://www.printables.com/model/375403 | data_0043.tar |
169721 | Ender 5 EVA Z-axis rod mounts | <p>The EVA carriage (https://main.eva-3d.page/) is great on the ender 5, except the rear mounted blower eats into y travel by contacting the z-rods. This mod relocates the rod support down 20mm to clear the carriage and not hit the bed mount. Some additional hardware needed to mount it.</p><p>Printed in PET... | [
"ender5",
"eva"
] | 3D Printers > Creality Parts & Upgrades | [
"169721/images/image_1_compressed.jpg",
"169721/images/image_2_compressed.jpg"
] | [
"169721/stls/ender 5 EVA clearance rod mount.stl"
] | CC-BY | https://www.printables.com/model/169721 | data_0043.tar |
104943 | Ender 5 Front Bar Relocator | <p>This is a set of pieces to lower the front crossbar of the Ender 5 down along the frame for better visibility and access to the build plate.</p><p>There are already some designs out there for this, but most of them drop it by just a bit. This one drops it by 120mm or so. This makes it so that the front bar is comple... | [
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"104943/images/image_1_compressed.jpg",
"104943/images/image_2_compressed.jpg"
] | [
"104943/stls/Ender5FrontBarRelocate.stl",
"104943/stls/Ender5FrontBarRelocateMirrored.stl"
] | CC-BY | https://www.printables.com/model/104943 | data_0043.tar |
306559 | Ender 5 Micro Swiss Direct Drive Cable Drag Chain Stepper Motor Mount (Linear rail & standard) | <p>This is my slowly and gradualy desgined cable chain for my beloved Ender 5 with Micro Swiss Direct Drive.</p><p>It is a remix of very sturdy chain for Ender 3 by Diogo Santos <a href="https://www.thingiverse.com/thing:3715002">https://www.thingiverse.com/thing:3715002</a><br>and some Nema17 motor chain mount I found... | [
"linearrail",
"ender5",
"cablechain",
"microswiss",
"microswissdirectdrive"
] | 3D Printers > Creality Parts & Upgrades | [
"306559/images/image_1_compressed.jpg",
"306559/images/image_10_compressed.jpg",
"306559/images/image_11_compressed.jpg",
"306559/images/image_12_compressed.jpg",
"306559/images/image_13_compressed.jpg",
"306559/images/image_2_compressed.jpg",
"306559/images/image_3_compressed.jpg",
"306559/images/ima... | [
"306559/stls/chain-link.stl",
"306559/stls/CHAIN_LINK_NO_STOP.stl",
"306559/stls/clip.stl",
"306559/stls/FRAME MOUNT LINEAR RAIL.stl",
"306559/stls/FRAME_TOP_MOUNT_STANDARD.stl",
"306559/stls/STEPPER_MOUNT_V1.stl",
"306559/stls/STEPPER_MOUNT_V2.stl"
] | CC-BY | https://www.printables.com/model/306559 | data_0043.tar |
459187 | Ender 5 pro bed strain relief. | <p>Ender 5 pro bed strain relief.</p><p>To direct the bed cables to the rear instead of the sides.</p><p>Printed in abs.</p><p>On the up mini it is easier to print in this position with supports.</p> | [] | 3D Printers > Creality Parts & Upgrades | [
"459187/images/image_1_compressed.jpg",
"459187/images/image_2_compressed.jpg"
] | [
"459187/stls/Bed strain relief.stl"
] | CC-BY | https://www.printables.com/model/459187 | data_0043.tar |
106690 | Ender 5 Pro Screen Relocate Bracket Modified |
<p>Note: You have to press it with some force down on the rail in order to fit. I had to use a wrench.</p>
<p>Screen ribbon cable was too short for me. Had to remove cablestrains in order to fit. Orderer a new cable on AliExpress.</p>
Category: 3D Printer Accessories
| [
"bracket",
"screen",
"thingiverse",
"relocate"
] | 3D Printers > Accessories | [
"106690/images/image_1_compressed.jpg",
"106690/images/image_2_compressed.jpg",
"106690/images/image_3_compressed.jpg",
"106690/images/image_4_compressed.jpg",
"106690/images/image_5_compressed.jpg"
] | [
"106690/stls/Ender_5_Pro_display_mount_1.stl"
] | CC-BY | https://www.printables.com/model/106690 | data_0043.tar |
106685 | Ender 5 Pro Strain Relief Curved | [
"upgrade",
"ender5",
"crealityender5"
] | 3D Printers > Creality Parts & Upgrades | [
"106685/images/image_1_compressed.jpg",
"106685/images/image_2_compressed.jpg"
] | [
"106685/stls/Ender_5__Pro_Strain_Relief_Modified.stl"
] | GPL3.0 | https://www.printables.com/model/106685 | data_0043.tar | |
127714 | Ender 5 Rear Mount Electronics & Power Bracket | <p>You may need longer cables to move the enclosure to the back. All mine were fine except the screen.</p> | [
"ender",
"ender5"
] | 3D Printers > Creality Parts & Upgrades | [
"127714/images/image_1_compressed.jpg",
"127714/images/image_2_compressed.jpg"
] | [
"127714/stls/Ender-5-Rear-Mount-Bracket.stl"
] | CC-BY | https://www.printables.com/model/127714 | data_0043.tar |
579040 | Ender 5 S1 Adapter For Creality Spider V3 Hotend | <ul><li>Will require 2 hex washers for the M3 screws to mount the hotend</li><li>Moves the nozzle forward 4mm. The nozzle is still between the fan ducts and no adjustment is needed. A longer filament tube is needed.</li><li>Stock hotend mounting screw will need to be cut or shorter screws used</li></ul><p> <... | [] | 3D Printers > Creality Parts & Upgrades | [
"579040/images/image_1_compressed.jpg",
"579040/images/image_2_compressed.jpg",
"579040/images/image_3_compressed.jpg",
"579040/images/image_4_compressed.jpg"
] | [
"579040/stls/E5 Spider V3.stl"
] | CC-BY | https://www.printables.com/model/579040 | data_0043.tar |
534336 | Ender 5 S1 Enclosure-Compatible Bed Mount for Camera | <p>I wanted to have a bed-mounted camera on my Ender 5 S1, but all of the premade ones I found didn't fit in one way or another.</p><p> </p><p>This should be compatible with any 2020 extrusion; I included holes in the side and bottom for locking it down with a t-nut if desired.</p><p> </p><p>Here's a shorter ... | [
"camera",
"cameramount",
"2020",
"2020mount",
"ender5s1"
] | 3D Printers > Accessories | [
"534336/images/image_1_compressed.jpg",
"534336/images/image_2_compressed.jpg",
"534336/images/image_3_compressed.jpg",
"534336/images/image_4_compressed.jpg",
"534336/images/image_5_compressed.jpg"
] | [
"534336/stls/Ender5 S1 bed mount for camera shorter.stl",
"534336/stls/Ender5 S1 bed mount for camera.stl"
] | CC-BY | https://www.printables.com/model/534336 | data_0043.tar |
163058 | Ender 5 y axis belt cover V2 (front and back) + silent home Y | <p>UPDATE
Did the stop with -5mm travel
people had some issues with roller bombing in to the corner bracket
FYI the eccentric nut of the roller have influence on the travel
give it a half turn towards the X gantry to give more travel</p>
<hr/>
<p>UPDATE</p>
<p>made the back covers (with end-stop)</p>
<p>and changed the... | [
"thingiverse",
"ender5",
"ender5plus",
"sovolsv05"
] | 3D Printers > Creality Parts & Upgrades | [
"163058/images/image_1_compressed.jpg",
"163058/images/image_2_compressed.jpg",
"163058/images/image_3_compressed.jpg",
"163058/images/image_4_compressed.jpg",
"163058/images/image_5_compressed.jpg",
"163058/images/image_6_compressed.jpg",
"163058/images/image_7_compressed.jpg",
"163058/images/image_8... | [
"163058/stls/back_left_cover.stl",
"163058/stls/back_right_cover.stl",
"163058/stls/front_left_cover.stl",
"163058/stls/front_right_cover.stl",
"163058/stls/large_display_back_left_cover_163058.stl",
"163058/stls/large_display_Stop_Switch_fits_back_right_cover_163058.stl",
"163058/stls/Stop_Switch_+5mm_... | CC-BY | https://www.printables.com/model/163058 | data_0043.tar |
250361 | Ender 5 / Ender 5 Plus Print hotend Cable Strain Relief Support | <p>I have made different remixes and think the one I put stl of is the best of all the ideas I had.</p>
<p>This suits Ender 5.</p>
<p>I have not tried this on other printers.</p>
Category: 3D Printer Accessories | [
"holder",
"support",
"thingiverse",
"ender5"
] | 3D Printers > Accessories | [
"250361/images/image_1_compressed.jpg",
"250361/images/image_2_compressed.jpg",
"250361/images/image_3_compressed.jpg",
"250361/images/image_4_compressed.jpg",
"250361/images/image_5_compressed.jpg"
] | [
"250361/stls/Holder.stl"
] | CC-BY | https://www.printables.com/model/250361 | data_0043.tar |
604067 | Ender Sprite Extruder Lever | <p>Printed at .44 layer height with a .6mm nozzle using PLA</p> | [] | 3D Printers > Creality Parts & Upgrades | [
"604067/images/image_1_compressed.jpg",
"604067/images/image_2_compressed.jpg"
] | [
"604067/stls/Ender_Sprite_Lever.stl"
] | CC0 | https://www.printables.com/model/604067 | data_0043.tar |
186044 | Ender-3 X-Gantry Alignment Tool |
<p>This is a pair of "legs" that will hold the x-gantry perfectly level while you adjust it. This video from Alex Kenis will show how it can be used instead of the CD cases he uses.</p>
<p>
<figure class="media">
<oembed url="https://www.youtube.com/watch?v=AN0MlQMMew0&t=149s"></oembed>
</figure>
</p>
<p>You don... | [
"tool",
"ender3",
"thingiverse",
"alignment"
] | 3D Printers > Accessories | [
"186044/images/image_1_compressed.jpg",
"186044/images/image_2_compressed.jpg",
"186044/images/image_3_compressed.jpg",
"186044/images/image_4_compressed.jpg",
"186044/images/image_5_compressed.jpg"
] | [
"186044/stls/Ender-3_X-Gantry_Holder.stl",
"186044/stls/M3_knob_5.5mm_hole.stl"
] | CC-BY | https://www.printables.com/model/186044 | data_0043.tar |
213515 | Ender3 extruder arm | <p>Simplified extruder arm from official open source ender3 files (https://github.com/Creality3DPrinting/Ender-3/tree/master/Ender-3 Mechanical/)</p> | [
"extruder",
"arm",
"ender3"
] | 3D Printers > Creality Parts & Upgrades | [
"213515/images/image_1_compressed.jpg"
] | [
"213515/stls/ender3 extruder arm.stl"
] | CC0 | https://www.printables.com/model/213515 | data_0043.tar |
192546 | Ender3/Pro calibration pattern |
<p>This is a simple model to test your bed level and adhesion. It's roughly 200x200 and fits the Ender 3 and Ender 3 Pro bed perfectly. It's ofcourse usable on any printer with a print bed of size 220x220 or larger. I use it to track down bed leveling issues like warping and poor adhesion.</p>
<p>If you print it on ... | [
"thingiverse"
] | 3D Printers > Test Models | [
"192546/images/image_1_compressed.jpg",
"192546/images/image_2_compressed.jpg",
"192546/images/image_3_compressed.jpg"
] | [
"192546/stls/Kalibrering_01.stl"
] | CC-BY | https://www.printables.com/model/192546 | data_0043.tar |
37984 | Endstops for CNC 3018 Pro Router | <p>Endstops for CNC 3018 Pro Router.</p>
<p>Visit my blog for more info:<br/>
<a href="https://samueldperry.com/2020/09/01/cnc-3018-pro-router-adding-endstops/">https://samueldperry.com/2020/09/01/cnc-3018-pro-router-adding-endstops/</a></p> | [] | Hobby & Makers > Tools | [
"37984/images/image_1_compressed.jpg"
] | [
"37984/stls/3030_tee_nut.stl",
"37984/stls/x_negative.stl",
"37984/stls/x_positive.stl",
"37984/stls/y_negative.stl",
"37984/stls/y_positive.stl",
"37984/stls/y_trippers.stl",
"37984/stls/z_negative.stl",
"37984/stls/z_positive.stl",
"37984/stls/z_trippers.stl"
] | CC-BY | https://www.printables.com/model/37984 | data_0043.tar |
844057 | English Bulldog Peeking Dog Wall Decoration | <p>English Bulldog Peeking Dog Wall Decoration</p> | [] | Art & Design > Wall-mounted | [
"844057/images/image_1_compressed.jpg"
] | [
"844057/stls/English Bulldog Peeking Dog Wall Decoration.stl"
] | CC-BY | https://www.printables.com/model/844057 | data_0043.tar |
538127 | Enphase Solar Tool | <p>This is a replica of the Enphase disconnect tool, it should come free with every IQ micro-inverter you bought but maybe it was lost or you got the inverter secondhand and need a quick replacement.</p> | [
"solar",
"enphase",
"iq7",
"microinverter",
"iq8"
] | Hobby & Makers > Electronics | [
"538127/images/image_1_compressed.jpg"
] | [
"538127/stls/Enphase_tool.stl"
] | CC-BY | https://www.printables.com/model/538127 | data_0043.tar |
442599 | Enso Tree of Life 2d Wall Art Sculpture | 2D Wall Art in the style of an Yin Yang Bonsai | Download free 3D printable STL models | [
"wall",
"sign",
"art",
"2d",
"buddhism",
"calligraphy",
"yinyang",
"shodo",
"wallart",
"japan",
"japanese",
"china",
"asian",
"bonsai",
"zen",
"2dwallart",
"budda",
"treeoflife",
"enso",
"2dsculpture",
"japaneseart",
"buddism"
] | Art & Design > Wall-mounted | [
"442599/images/image_1_compressed.jpg"
] | [
"442599/stls/Zen_Tree_of_Life.stl"
] | GPL2.0 | https://www.printables.com/model/442599 | data_0043.tar |
1650328 | Enter the Dragon - Bruce Lee - 1973 | <p>Enter the Dragon - Bruce Lee - 1973 3D printable model. Super easy to print! Just adjust size to your needs and go! </p> | [] | Tabletop Miniatures > Characters & Monsters | [
"1650328/images/image_1_compressed.jpg"
] | [
"1650328/stls/bruce-lee.stl"
] | CC0 | https://www.printables.com/model/1650328 | data_0043.tar |
1317939 | Envelope Template | <p>This is a blank envelope model for remixing and creating your own envelope design. </p><p>It doesn't require any glue.</p><p>The folded dimensions of the envelope are 165 x 80 mm.</p><p>It's the base envelope I made for the Eid envelope I uploaded a while back - an example of the kinds of things you could ... | [
"blank",
"template",
"foldabledesign",
"envelope"
] | Household > Office | [
"1317939/images/image_1_compressed.jpg",
"1317939/images/image_2_compressed.jpg",
"1317939/images/image_3_compressed.jpg",
"1317939/images/image_4_compressed.jpg"
] | [
"1317939/stls/Blank Envelope Template Outer.stl",
"1317939/stls/Blank Envelope Template.stl"
] | CC0 | https://www.printables.com/model/1317939 | data_0043.tar |
322717 | Eppendorf and PCR tube rack | Lightweight holder for 1.5, 0.5 and 0.3 ml tubes with small area for names. | Download free 3D printable STL models | [
"holder",
"stand",
"rack",
"tube",
"laboratory",
"pcr",
"eppendorf"
] | Learning > Chemistry & Biology | [
"322717/images/image_1_compressed.jpg"
] | [
"322717/stls/HolderL.stl"
] | CC0 | https://www.printables.com/model/322717 | data_0043.tar |
446464 | Epson 103 EcoTank Ink Holder | <p>Simple but strong EcoTank ink holder. Holes are little bit bigger to make possible to hold new ink with protection bag on it. Model has engraved letters to determinate the color of bottle in same order as in my Epson L3251 printer.</p><p>Its great way to store it clean and organized.</p><p>I hope You enjoy it.</p><p... | [
"holder",
"ink",
"epson",
"ecotank"
] | Gadgets > Computers | [
"446464/images/image_1_compressed.jpg",
"446464/images/image_2_compressed.jpg"
] | [
"446464/stls/Epson 103 EcoTank Ink Holder.stl"
] | CC-BY | https://www.printables.com/model/446464 | data_0043.tar |
1214275 | Epson LW-C410 Label Printer/Label Maker Gridfinity holder | <p>A gridfinity holder for the Epson LW-C410 label maker with room to store 2 additional label cartridges to the side of it.</p><p>There is also a tray in front of the label maker to collect the 1cm or so of waste label it does every time it prints a label.</p><p>I've also included the fusion 360 file if anyone wanted ... | [
"printer",
"label",
"labelmaker",
"epson",
"labelprinter",
"gridfinity",
"gridfinityholder",
"lwc410"
] | Hobby & Makers > Organizers | [
"1214275/images/image_1_compressed.jpg",
"1214275/images/image_2_compressed.jpg",
"1214275/images/image_3_compressed.jpg",
"1214275/images/image_4_compressed.jpg"
] | [
"1214275/stls/Gridfinity Epson LW-C410 v1.stl"
] | CC0 | https://www.printables.com/model/1214275 | data_0043.tar |
220435 | ERCF back Mount 2.0 | <p>A Mount for a 6N,9N&12N ERCF on the Back of a 250x250, 300x300 & 350x350 Build Volume V2.4 or Trident</p><p> </p><p>Addet 200er version (only n6 +n9)</p><p>(not testet)</p><p> </p><p>You need also :</p><p>4x M5x25mm</p><p>+</p><p><a href="https://github.com/Tircown/ERCF-easy-brd/blob/main/mods/Bott... | [
"voron",
"vorontrident",
"ercf"
] | 3D Printers > Other Printer Parts & Upgrades | [
"220435/images/image_1_compressed.jpg",
"220435/images/image_2_compressed.jpg",
"220435/images/image_3_compressed.jpg",
"220435/images/image_4_compressed.jpg",
"220435/images/image_5_compressed.jpg"
] | [
"220435/stls/200er left.stl",
"220435/stls/200er right.stl",
"220435/stls/250er left.stl",
"220435/stls/250er right.stl",
"220435/stls/300er left.stl",
"220435/stls/300er right.stl",
"220435/stls/350er left.stl",
"220435/stls/350er right.stl"
] | GPL3.0 | https://www.printables.com/model/220435 | data_0043.tar |
408667 | ERCF Easy Brd & Rabbit Burrow Mount | <p>Simple remix of the existing ERCF Easy Brd mount to work with both the <a href="https://github.com/Tircown/ERCF-easy-brd">Easy Brd</a> and <a href="https://www.aliexpress.com/item/1005004262364375.html">Fysetc Rabbit Burrow Board</a></p> | [
"mmu",
"feeder",
"rabbit",
"board",
"v2",
"easy",
"carrot",
"fysetc",
"trident",
"voron",
"v0",
"switchwire",
"ercf",
"enraged",
"burrow",
"brd"
] | 3D Printers > Other Printer Parts & Upgrades | [
"408667/images/image_1_compressed.jpg"
] | [
"408667/stls/Easy Brd Mount.stl"
] | CC-BY | https://www.printables.com/model/408667 | data_0043.tar |
1003585 | ERF Filament Cutter G2E EBB SB2209 USB | <p><a href="https://github.com/juliusjj25/G2E-Filametrix-Lever-Switch-Mod">https://github.com/juliusjj25/G2E-Filametrix-Lever-Switch-Mod</a></p><p> </p><p>Without supports. In one of the latest updates, Fusion 360 significantly reduced the model quality when exporting to STL (fewer polygons). Because of this, I no... | [] | 3D Printers > Voron Parts & Upgrades | [
"1003585/images/image_1_compressed.jpg"
] | [
"1003585/stls/Cutting_G2E_EBB_USB.stl",
"1003585/stls/Cutting_G2E_EBB_USB_Cover.stl",
"1003585/stls/Cutting_G2E_EBB_USB_Cover_3010_fan.stl",
"1003585/stls/support_1.stl",
"1003585/stls/support_2.stl"
] | CC-BY | https://www.printables.com/model/1003585 | data_0043.tar |
846993 | Ergonomic Book Holder | <p>This book holder helps keep your pages wide open and makes page turning easy as its attached to your thumb.</p> | [
"book",
"thing",
"books",
"best",
"page",
"pageholder",
"bookholder",
"pages"
] | Household > Living Room | [
"846993/images/image_1_compressed.jpg"
] | [
"846993/stls/Ergonomic book holder.stl"
] | CC0 | https://www.printables.com/model/846993 | data_0043.tar |
829249 | Ergonomic hand stabilizer for precise operations | <h3><strong>Update:</strong></h3><p>Adding a new base with large opening (from 40mm to 45 mm) for thicker bench top. The v-grove is removed in this base. </p><h3>Introduction:</h3><p>This is a versatile hand stabilizer that could be used in any shop that requires precise operations. It is a fully printable design ... | [
"holder",
"jewelry",
"adjustable",
"clamping",
"alignment",
"relievestress",
"shakeprevention"
] | Hobby & Makers > Tools | [
"829249/images/image_1_compressed.jpg",
"829249/images/image_2_compressed.jpg",
"829249/images/image_3_compressed.jpg",
"829249/images/image_4_compressed.jpg",
"829249/images/image_5_compressed.jpg"
] | [
"829249/stls/All-5-parts.stl",
"829249/stls/base_large_opening.stl"
] | CC-BY | https://www.printables.com/model/829249 | data_0043.tar |
154837 | Ergonomic handle based on scientific study | <p>This is an OpenSCAD library to generate an ergonomic handle that distributes hand contact pressure as evenly as possible, for any size of hand.</p><p>The dimensions in this model are based on several research papers using anthropometric data from various populations around the world. The handle profile is based on a... | [
"thingiverse",
"ergonomic",
"ergonomicgrip",
"ergonomichandle",
"ergonomics",
"anthropometric"
] | Hobby & Makers > Tools | [
"154837/images/image_1_compressed.jpg",
"154837/images/image_2_compressed.jpg",
"154837/images/image_3_compressed.jpg",
"154837/images/image_4_compressed.jpg",
"154837/images/image_5_compressed.jpg"
] | [
"154837/stls/ergonomic_handle_v5.stl"
] | CC-BY | https://www.printables.com/model/154837 | data_0043.tar |
270055 | Ersatzgriff für Zenker 7903 Blechkuchen-Container, Replacement handle for Zenker 7903 sheet cake container | <p>PLA is ok, I would recommend ABS because it has some flex.</p><p>0,2 mm Resolution</p><p> 40 % Infill</p><p>Tree-Support</p> | [
"handle",
"replacmentpart",
"zenker"
] | Household > Kitchen | [
"270055/images/image_1_compressed.jpg",
"270055/images/image_2_compressed.jpg",
"270055/images/image_3_compressed.jpg",
"270055/images/image_4_compressed.jpg"
] | [
"270055/stls/Zenker Griff v3.stl",
"270055/stls/Zenker Griff_stonger.stl",
"270055/stls/Zenker Griff_stronger.stl"
] | CC-BY | https://www.printables.com/model/270055 | data_0043.tar |
942370 | Ersatzmesser Ersatzklingen Für STIHL FSA45 Polycut 2-2 / Replacement blades for STIHL | [
"blade",
"blades",
"trimmer",
"stihl",
"freischneider",
"fsa",
"cuter",
"polycut",
"schneide",
"klingen",
"ersatzmesser"
] | Household > Outdoor & Garden | [
"942370/images/image_1_compressed.jpg",
"942370/images/image_2_compressed.jpg",
"942370/images/image_3_compressed.jpg",
"942370/images/image_4_compressed.jpg"
] | [
"942370/stls/stihl fs.stl"
] | CC0 | https://www.printables.com/model/942370 | data_0043.tar | |
384726 | Ersatzteile für Playmobilreiterhof | <p>Diverse Kleinteile als Ersatz für Playmobil Reiterhof </p> | [
"playmobil",
"ersatzteil",
"zaunpfosten",
"reiterhof"
] | Toys & Games > Other Toys & Games | [
"384726/images/image_1_compressed.jpg",
"384726/images/image_2_compressed.jpg",
"384726/images/image_3_compressed.jpg",
"384726/images/image_4_compressed.jpg"
] | [
"384726/stls/PFOSTEN.stl",
"384726/stls/PFOSTENABSCHLUSS.stl",
"384726/stls/PFOSTEN_V2.stl",
"384726/stls/RIEGEL_RUND.stl",
"384726/stls/RIEGEL_V2.stl"
] | CC-BY | https://www.printables.com/model/384726 | data_0043.tar |
442450 | Escuadra 20x20x20 | <p>Escuadras para estanterias de armario</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>RepRap</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Hephestos</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-setting supports"><strong>Supports: </strong>
<div>... | [] | Hobby & Makers > Other Ideas | [
"442450/images/image_1_compressed.jpg",
"442450/images/image_2_compressed.jpg"
] | [
"442450/stls/escuadra1.stl"
] | CC-BY | https://www.printables.com/model/442450 | data_0043.tar |
829806 | Escudo del Athletic club de Bilbao | <p>He realizado el escudo del Athletic de Bilbao para que se imprima con 3 cambios de color y optimizado en una sola capa.<br>Esta en fase beta por lo que, cualquier sugerencia de mejora será bienvenida. Próximamente diseñare una caja para poner led y otra para acomodarlo para convertirlo en una hucha.</p> | [
"futbol",
"escudo",
"bilbao",
"athletic",
"athleticbilbao",
"equiposfutbol"
] | Art & Design > 2D Plates & Logos | [
"829806/images/image_1_compressed.jpg"
] | [
"829806/stls/Athletic por capas 3 colores.stl",
"829806/stls/Escudo Athletic principal escalado 0.25.stl"
] | CC-BY | https://www.printables.com/model/829806 | data_0043.tar |
977983 | ESCURRIDOR DE IMPRESION ANYCUBIC PHOTOM MONO M5S/M5SPRO | <p>ACCESORIO PARA ESCURRIR LA RESINA SOBRANTE DE LA IMPRESION.</p><p>DISEÑADO PARA LA SERIE PHOTOM MONO M5S Y M5S PRO</p><figure class="table" style="height:54.7812px;width:714px;"><table style="border:1px double #F5F5F5;"><tbody><tr><td style="background-color:#000000;border:5px solid #F5F5F5;padding:0.4em;text-align:... | [
"anycubic",
"accesorio",
"escurridor",
"resina",
"m5s",
"bemolitionindustries"
] | 3D Printers > Accessories | [
"977983/images/image_1_compressed.jpg",
"977983/images/image_2_compressed.jpg",
"977983/images/image_3_compressed.jpg"
] | [
"977983/stls/escurridor de m5s v1.stl"
] | CC-BY | https://www.printables.com/model/977983 | data_0043.tar |
568613 | ESP32 CAM Case by ac1dburn | <p>A very compact case for an ESP32 CAM Module. Some things to note, I initially designed this for my own use and I'm just sharing in case anyone else wanted to utilize the design. With that said, there's a few proprietary features to this design. I used a Type C USB connector board out of an HQD branded rechargeable v... | [] | Hobby & Makers > Electronics | [
"568613/images/image_1_compressed.jpg",
"568613/images/image_2_compressed.jpg",
"568613/images/image_3_compressed.jpg",
"568613/images/image_4_compressed.jpg",
"568613/images/image_5_compressed.jpg",
"568613/images/image_6_compressed.jpg",
"568613/images/image_7_compressed.jpg"
] | [
"568613/stls/Base.stl",
"568613/stls/Lid.stl"
] | CC-BY | https://www.printables.com/model/568613 | data_0043.tar |
255431 | ESP32 case for WLED | <p>ESP32 case designed to incorporate a microphone and connect to a leds strip. This was specifically designed to <a href="https://github.com/atuline/WLED">sound reactive WLED</a>.</p><p> </p><p>4 M2 bolts are needed to mount the ESP32 PCB, but nothing is needed to close the case.</p> | [
"sound",
"esp32",
"wled",
"mic",
"reactive",
"esp32dev"
] | Hobby & Makers > Electronics | [
"255431/images/image_1_compressed.jpg",
"255431/images/image_2_compressed.jpg"
] | [
"255431/stls/esp32_case-Bottom.stl",
"255431/stls/esp32_case-Top.stl"
] | GPL2.0 | https://www.printables.com/model/255431 | data_0043.tar |
122096 | ESP32 D1 Mini snap fit case with Power Jack | <p>This is a remix of the case by Lorenz Nimmervoll. Thanks to him!</p><p>My changes:</p><ul><li>adjusted size for ESP32 D1 Mini</li><li>snap fit case</li><li>ventilation in cover</li><li>fixation of the Power Jack</li><li>simplyfing inside for less supports/material</li><li>only one hole for cables</li></ul> | [
"case",
"led",
"ws2812b",
"esp32",
"wemosd1mini",
"d1mini",
"wled",
"esp32case"
] | Hobby & Makers > Electronics | [
"122096/images/image_1_compressed.jpg",
"122096/images/image_2_compressed.jpg",
"122096/images/image_3_compressed.jpg",
"122096/images/image_4_compressed.jpg"
] | [
"122096/stls/esp32_mini_d1_base.stl",
"122096/stls/esp32_mini_d1_cover.stl"
] | CC-BY | https://www.printables.com/model/122096 | data_0043.tar |
412753 | ESP32 Microscope - Matchboxscope | <p>project based on research from me (@V_saggiomo) and Benedict Diederich (@beniroquai)</p><p> </p><p>*update April 2023 - we are testing external (battery-powered) LED. These LEDs are usually used for decorations, can be on for 2 weeks, and are quite cheap. See for example <a href="https://www.amazon.nl/LIHAO-min... | [
"microscope",
"microscopy"
] | Learning > Chemistry & Biology | [
"412753/images/image_1_compressed.jpg",
"412753/images/image_10_compressed.jpg",
"412753/images/image_11_compressed.jpg",
"412753/images/image_2_compressed.jpg",
"412753/images/image_3_compressed.jpg",
"412753/images/image_4_compressed.jpg",
"412753/images/image_5_compressed.jpg",
"412753/images/image... | [
"412753/stls/Cameraspacer_12.stl",
"412753/stls/ESP32Microscope_bottom_v0_3.stl",
"412753/stls/ESP32Microscope_Lightperiscope_V0_1.stl",
"412753/stls/ESP32Microscope_middle_magnets_v1.stl",
"412753/stls/ESP32Microscope_sample_magnets_v1.stl",
"412753/stls/Matchboxscope_VCM_v1_Matchboxscope_Lightperiscope_... | CC-BY | https://www.printables.com/model/412753 | data_0043.tar |
962285 | ESP32-WROOM-32D (38 pin small footprint) case | <p>This case was designed to fit this small footprint ESP32-WROOM-32D from Amazon because I couldn't find a case that fit it. <a href="https://www.amazon.ca/dp/B0C9VSYS4N?th=1">https://www.amazon.ca/dp/B0C9VSYS4N?th=1</a></p><p>I made this in FreeCAD from scratch, but the design is based on the appearance of two differ... | [] | Gadgets > Other Gadgets | [
"962285/images/image_1_compressed.jpg",
"962285/images/image_2_compressed.jpg",
"962285/images/image_3_compressed.jpg",
"962285/images/image_4_compressed.jpg"
] | [
"962285/stls/ESP32 Case Base.stl",
"962285/stls/ESP32 Case Top with Icons.stl"
] | CC0 | https://www.printables.com/model/962285 | data_0043.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.