model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
1163351 | friendship bracelet maker / Freundschaftsbänder Helfer | [
"friends",
"jewelry",
"schmuck",
"basteln"
] | Hobby & Makers > Tools | [
"1163351/images/image_1_compressed.jpg"
] | [
"1163351/stls/Freundschaftband v1 (Schmale Litzen).stl",
"1163351/stls/Freundschaftsband v2 (Breitere Litzen).stl"
] | CC-BY | https://www.printables.com/model/1163351 | data_0043.tar | |
16036 | Frigidaire Refrigerator Handle Bracket | <p>Bracket to repair a broken refrigerator handle on a Frigidaire LFHT1817LW3. This is for the fridge handle, not the freezer handle. Requires cutting off an exact amount of the handle due to the spacers inside the cap part. Improves original design as it's thicker and has a hook to reach the far side in addition to th... | [
"handle",
"refrigerator",
"bracket",
"repair",
"thingiverse",
"frigidaire",
"lfht18"
] | Household > Kitchen | [
"16036/images/image_1_compressed.jpg",
"16036/images/image_2_compressed.jpg",
"16036/images/image_3_compressed.jpg",
"16036/images/image_4_compressed.jpg",
"16036/images/image_5_compressed.jpg"
] | [
"16036/stls/lfht1817lw3-bottom-handle-cap.stl"
] | CC-BY | https://www.printables.com/model/16036 | data_0043.tar |
60856 | Frisbee thrower | <p>Frisbee thrower which do not requires assembly and supports. Step file is provided.</p><figure class="media"><oembed url="https://www.youtube.com/watch?v=79T_iePzYug"></oembed></figure><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Prusa</p><p> </p><p><strong>Printer: </strong></p><p>I3 MK... | [
"thingiverse"
] | Toys & Games > Other Toys & Games | [
"60856/images/image_1_compressed.jpg",
"60856/images/image_2_compressed.jpg",
"60856/images/image_3_compressed.jpg",
"60856/images/image_4_compressed.jpg",
"60856/images/image_5_compressed.jpg"
] | [
"60856/stls/Frisbee.stl",
"60856/stls/Frisbee_Thrower_v2.stl"
] | LGPL | https://www.printables.com/model/60856 | data_0043.tar |
84204 | Front-Tray for Elegoo Neptune 2 | <p>Front "Stuff" Tray for Elegoo Neptune 2</p><p>This slides in right beside the control panel to stick stuff in.</p><h3>Print Settings</h3><p><strong>Printer: </strong>Elegoo Neptune 2</p><p><strong>Rafts: </strong>No</p><p><strong>Supports: </strong>Yes</p><p><strong>Resolution: </strong>200</p><p><strong>Infill... | [
"tray",
"thingiverse",
"4040extrusion",
"elegooneptune2",
"neptune2",
"fronttray"
] | 3D Printers > Accessories | [
"84204/images/image_1_compressed.jpg",
"84204/images/image_2_compressed.jpg"
] | [
"84204/stls/Front-Tray v22.stl"
] | CC-BY | https://www.printables.com/model/84204 | data_0043.tar |
448165 | Frosthaven/Gloomhaven Terrain Type Markers | <p>I was annoyed that Frosthaven uses the same overlay tile as different types of terrain so I made these little overlays to drop down to match the rulebook. It makes seeing terrain types easier at a glance.</p><p>I designed them for a <strong>.4mm nozzle</strong> doing <strong>.2mm layer height</strong> and <strong>.4... | [
"gloomhaven",
"frosthaven"
] | Tabletop Miniatures > Miniature Gaming Accessories | [
"448165/images/image_1_compressed.jpg",
"448165/images/image_2_compressed.jpg",
"448165/images/image_3_compressed.jpg"
] | [
"448165/stls/1x_Difficult.stl",
"448165/stls/1x_Hazard.stl",
"448165/stls/1x_Icy.stl",
"448165/stls/1x_Obstacle.stl",
"448165/stls/2x_Difficult.stl",
"448165/stls/2x_Hazard.stl",
"448165/stls/2x_Obstacle.stl",
"448165/stls/3x_Difficult.stl",
"448165/stls/3x_Hazard.stl",
"448165/stls/3x_Obstacle.st... | CC0 | https://www.printables.com/model/448165 | data_0043.tar |
281714 | Fruit Fly Trap using "Gu" Jar Pot | [
"trap",
"fruitflytrap"
] | Household > Kitchen | [
"281714/images/image_1_compressed.jpg",
"281714/images/image_2_compressed.jpg",
"281714/images/image_3_compressed.jpg"
] | [
"281714/stls/Fruit fly trap.stl"
] | CC-BY | https://www.printables.com/model/281714 | data_0043.tar | |
290475 | Fruit Picker | <p>This was one of my earlier attempts at design in order to learn the use of Fusion360. It has been quite the learning experience and looking back now I have spent a lot of time and used complicated ways to achieve what I was trying to accomplish when it could have been done in much simpler ways. I cannot ... | [
"print",
"3dprinting",
"supportless",
"fruit",
"garden",
"gardening",
"fasteners",
"nosupportsneeded",
"nosupports",
"picker"
] | Household > Outdoor & Garden | [
"290475/images/image_1_compressed.jpg"
] | [
"290475/stls/Handle attachment.stl",
"290475/stls/Picker.stl",
"290475/stls/Pouch securing ring v1.stl",
"290475/stls/Pouch securing ring.stl"
] | CC-BY | https://www.printables.com/model/290475 | data_0043.tar |
313720 | Fröhliche Weihnachten Ornament | <h5><i><strong>Wechsle die Farbe von deinen Filament bei 10mm höhe, um den Schriftzug “fröhliche Weihnachten” in einer anderen Farbe zu betonen.</strong></i></h5><p> </p><h3><i><strong>check out my other christmas designs:</strong></i></h3><ul><li><a href="https://www.printables.com/de/model/313848-christmas-snowf... | [
"weihnachten",
"weihnachtsbaum",
"weihnachtsdekoration",
"weihnacht",
"weihnachtsdeko"
] | Seasonal designs > Winter & Christmas & New Year's | [
"313720/images/image_1_compressed.jpg"
] | [
"313720/stls/Fröhliche Weihnachten Ornament.stl"
] | CC0 | https://www.printables.com/model/313720 | data_0043.tar |
1623081 | FS2026-rewinder-nut remix | [] | 3D Printers > Accessories | [
"1623081/images/image_1_compressed.jpg"
] | [
"1623081/stls/FS2026-rewinder-nut.stl"
] | GPL2.0 | https://www.printables.com/model/1623081 | data_0043.tar | |
491106 | FT EMS SWC (Ender 3 V2/Pro Electronics Management System) | <h3>INTRODUCTION</h3><p>This frame was designed to help manage the electronic components required for a switchwire conversion (SKR Mini E3, Creality boardes, Raspberry Pi, U2C boards etc,..). Typical conversions have you squish all these components at the rear of the printer making it tough to mount not to mention cabl... | [
"ender3v2",
"ender3v2mods",
"switchwire"
] | 3D Printers > Creality Parts & Upgrades | [
"491106/images/image_1_compressed.jpg",
"491106/images/image_2_compressed.jpg",
"491106/images/image_3_compressed.jpg",
"491106/images/image_4_compressed.jpg",
"491106/images/image_5_compressed.jpg",
"491106/images/image_6_compressed.jpg",
"491106/images/image_7_compressed.jpg",
"491106/images/image_8... | [
"491106/stls/Fly Gemini mounts.stl",
"491106/stls/Front Fan mount.stl",
"491106/stls/FT Ender 3 Switchwire Board Frame 1-2.stl",
"491106/stls/FT Ender 3 Switchwire Board Frame 2-2.stl",
"491106/stls/FT Ender 3 Switchwire Board Frame.stl",
"491106/stls/R Pi mounts.stl",
"491106/stls/SKR Mini E3 mounts.st... | CC-BY | https://www.printables.com/model/491106 | data_0043.tar |
1168679 | Fujifilm 35mm F2 WR Lens Hood and Cap | <p>Square style lens hood and cap for the Fujifilm 35mm F2 WR lens.</p><p>Example was printed on a Bambu Lab A1 using eSUN Upgraded Matte PLA Filament with a 0.4mm nozzle and a layer height of 0.2mm. </p><p>The model can be printed without the use of supports.</p><p>Scale may need to be adjusted slightly depending... | [
"fujifilm",
"photography",
"lenshood"
] | Gadgets > Photo & Video | [
"1168679/images/image_1_compressed.jpg",
"1168679/images/image_2_compressed.jpg",
"1168679/images/image_3_compressed.jpg"
] | [
"1168679/stls/Fuji35mmF2LensHood.stl",
"1168679/stls/Fuji35mmF2LensHoodCap.stl"
] | CC-BY | https://www.printables.com/model/1168679 | data_0043.tar |
1639286 | Full Spectrum Color Palette for XL | <p>The concept of "Full Spectrum" color blending has just dropped on the toolchanger community over the last month. See this <a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.reddit.com/r/snapmaker/comments/1r0i56r/full_spectrum_full_color_slicer_fork_of_snapmaker/">Reddit thre... | [] | 3D Printers > Accessories | [
"1639286/images/image_1_compressed.jpg",
"1639286/images/image_2_compressed.jpg",
"1639286/images/image_3_compressed.jpg"
] | [
"1639286/stls/7pt5 mm Color Palette - OrcaXL.stl",
"1639286/stls/Large Color Palette-XL.stl",
"1639286/stls/Small Color Palette-XL.stl"
] | CC-BY | https://www.printables.com/model/1639286 | data_0043.tar |
1484464 | Full-size Steam Machine placeholder | <p>This matches the stated dimensions of 152 mm tall, 162.4 mm deep, and 156 mm wide. If you want to match the weight of 2.6 kg, try checking around 55% infill depending on the type. For grid I found ~53%, and gyroid 58%.</p><p>The front and back features are chamfered to prevent all overhangs. The feet aren't modeled,... | [
"videogame",
"computer",
"console",
"sizing",
"steammachine",
"gabecube"
] | Art & Design > Sculptures | [
"1484464/images/image_1_compressed.jpg",
"1484464/images/image_2_compressed.jpg",
"1484464/images/image_3_compressed.jpg"
] | [
"1484464/stls/GabeCube-v11-orcaslicer.stl",
"1484464/stls/GabeCube-v11.stl"
] | CC0 | https://www.printables.com/model/1484464 | data_0043.tar |
836364 | Fully 3D printable Cam F Clamp | <p>Unlike screw and quick-grip clamps, these don't have enough travel and power to force far objects to be closer. But it is good for quickly holding things together and delivers enough force to crush your fingers if you try hard enough. I made a few different sizes to accommodate different printers. </p><p>Settin... | [
"tool",
"workshop",
"woodshop",
"woodworking",
"clamp",
"tools",
"camclamp",
"toggleclamp"
] | Hobby & Makers > Tools | [
"836364/images/image_1_compressed.jpg",
"836364/images/image_2_compressed.jpg",
"836364/images/image_3_compressed.jpg",
"836364/images/image_4_compressed.jpg",
"836364/images/image_5_compressed.jpg"
] | [
"836364/stls/toggle clamp body 180mm.stl",
"836364/stls/toggle clamp body 220mm.stl",
"836364/stls/toggle clamp body 300mm.stl",
"836364/stls/toggle clamp body 400mm.stl",
"836364/stls/toggle clamp jaw.stl",
"836364/stls/Toggle clamp Screw on head.stl"
] | GPL2.0 | https://www.printables.com/model/836364 | data_0043.tar |
1311752 | Fully 3D printed heat set insert press and drilling press | <p>Fully 3D printed multifunction press for drilling with dremel or other mini drills and heat set inserts with support of generic soldering iron with D17 mm body or TS101 soldering iron. </p><p><strong>Not recommended to print everything in PETG, it does not slide smoothly and requires dry lubricant. PLA on PETG ... | [
"press",
"heat",
"set",
"drilling",
"insert"
] | Hobby & Makers > Tools | [
"1311752/images/image_1_compressed.jpg",
"1311752/images/image_2_compressed.jpg",
"1311752/images/image_3_compressed.jpg",
"1311752/images/image_4_compressed.jpg",
"1311752/images/image_5_compressed.jpg",
"1311752/images/image_6_compressed.jpg",
"1311752/images/image_7_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/1311752 | data_0043.tar |
245811 | Fully Customizable Foot |
<p>Having trouble finding your feet? The furniture kind, that is!</p>
<p>Whether you're replacing a missing foot or you need a complete set, you can now print your own with our fully customizable foot design.</p>
<p>This part was designed several months ago to replace a missing foot on a footstool. We were unsure ho... | [
"parametric",
"furniture",
"diy",
"replacement",
"customizable",
"foot",
"screw",
"repair",
"customizer",
"thingiverse",
"customized",
"replacementpart",
"customisable",
"parameterized"
] | Hobby & Makers > Other Ideas | [
"245811/images/image_1_compressed.jpg",
"245811/images/image_2_compressed.jpg",
"245811/images/image_3_compressed.jpg",
"245811/images/image_4_compressed.jpg"
] | [
"245811/stls/codeandmake.com_Foot_v1.0_-_Sample.stl"
] | BSD | https://www.printables.com/model/245811 | data_0043.tar |
245814 | Fully Customizable Hook | <p>Don't get hung up the next time you're trying to find somewhere to put your your keys, bag or jacket. Our latest design is here to help; a fully customizable hook!</p>
<p>This design is*<strong>completely free</strong>* and shared under a permissive license. Your <a href="https://codeandmake.com/support">support</a>... | [
"wall",
"hook",
"bag",
"storage",
"key",
"thingiverse",
"smallpartsstorage",
"wallhook",
"towelhook",
"baghook"
] | Household > Office | [
"245814/images/image_1_compressed.jpg",
"245814/images/image_2_compressed.jpg",
"245814/images/image_3_compressed.jpg",
"245814/images/image_4_compressed.jpg",
"245814/images/image_5_compressed.jpg",
"245814/images/image_6_compressed.jpg",
"245814/images/image_7_compressed.jpg",
"245814/images/image_8... | [
"245814/stls/codeandmake.com_Hook_v1.0_-_20mm_ID_15mm_Width_100_Radius.stl",
"245814/stls/codeandmake.com_Hook_v1.0_-_20mm_ID_15mm_Width_25_Radius.stl",
"245814/stls/codeandmake.com_Hook_v1.0_-_20mm_ID_15mm_Width_50_Radius.stl",
"245814/stls/codeandmake.com_Hook_v1.0_-_20mm_ID_15mm_Width_75_Radius.stl"
] | BSD | https://www.printables.com/model/245814 | data_0043.tar |
343731 | Fully parametric sailboat ornament / pendant | <p>This is an elegant little sailboat model, suitable for decorating a Christmas tree, wearing as a pendant on a necklace, or even an earring if printed really small.</p><p>I am quite proud of the parametric sailboat hull design I developed. All hull dimensions and shaping parameters are derived from parametric ratios ... | [
"earrings",
"earring",
"multicolor",
"mmu2s",
"sailboat",
"ornament",
"ornaments",
"thingiverse",
"christmasornament",
"christmasdecoration",
"christmasdecorations",
"boathull",
"necklacependants",
"3dpendant",
"monohull",
"sailboathull",
"sailboatiom"
] | Household > Home Decor | [
"343731/images/image_1_compressed.jpg",
"343731/images/image_2_compressed.jpg"
] | [
"343731/stls/sailboat_ornament.stl"
] | CC-BY | https://www.printables.com/model/343731 | data_0043.tar |
964025 | Fully Printable Filament Spool Roller | <p>No supports needed, the bearings are print in place. To assemble just put the legs in place and screw the bearings on, once they are screwed as far as possible by hand use a coin to lock in place. </p> | [
"spool",
"filament",
"spoolholder",
"filamentspoolholder",
"spoolmount",
"roller",
"spoolroller",
"filamentholder",
"filamentdrybox"
] | 3D Printers > Other Printer Parts & Upgrades | [
"964025/images/image_1_compressed.jpg",
"964025/images/image_2_compressed.jpg",
"964025/images/image_3_compressed.jpg",
"964025/images/image_4_compressed.jpg",
"964025/images/image_5_compressed.jpg"
] | [
"964025/stls/Base Left.stl",
"964025/stls/Base Right.stl",
"964025/stls/Levers.stl",
"964025/stls/Roller.stl",
"964025/stls/Sliders.stl"
] | CC-BY | https://www.printables.com/model/964025 | data_0043.tar |
1004271 | Fully Printable Hinge 270 Deg | <p>The original hinge (this is a remix) is nice looking but it did not allow for 270 degrees of movement and I could not re-inforce the core with metal, to make very stiff. Also it was very big and I wanted it a bit smaller to fit M3 allen bolts.</p><p>So, this is the resulting piece.</p><p>When printing it, I strongly... | [
"hinge",
"270",
"fullyprintable",
"270degrees"
] | Hobby & Makers > Mechanical Parts | [
"1004271/images/image_1_compressed.jpg",
"1004271/images/image_2_compressed.jpg"
] | [
"1004271/stls/hinge_modified.stl"
] | CC-BY | https://www.printables.com/model/1004271 | data_0043.tar |
1088415 | Fully printable Legos! Over 33 models! | <p>These are fully printable Lego compatible bricks. If you would like any bricks to be designed that are not already made, comment and I will try to design them. Please like and post a make. The bricks work well with themselves and pretty well with Lego brand Legos. Have fun building!</p> | [
"toys",
"fun",
"printinplace",
"building",
"easy",
"snapfit",
"lego",
"block",
"legocompatible",
"buildingblocks",
"moneysaver"
] | Toys & Games > Building Toys | [
"1088415/images/image_1_compressed.jpg",
"1088415/images/image_2_compressed.jpg"
] | [
"1088415/stls/brick 1x1.stl",
"1088415/stls/brick 1x16.stl",
"1088415/stls/brick 1x2.stl",
"1088415/stls/brick 1x3.stl",
"1088415/stls/brick 1x4.stl",
"1088415/stls/brick 1x8.stl",
"1088415/stls/brick 2x2.stl",
"1088415/stls/brick 2x3.stl",
"1088415/stls/brick 2x4.stl",
"1088415/stls/brick 2x6.stl... | CC-BY | https://www.printables.com/model/1088415 | data_0043.tar |
297360 | Functional foldable ladder 1/16 scale | <p>A generic foldable ladder in 1/16 scale suitable for use in dollhouses, dioramas etc. that was designed for my mother's dollhouse that she is building. It's designed to be able to be folded in the same was as a real foldable ladder.</p><p>Printing instruction:</p><p>printing the parts is simple and straight forward,... | [
"miniature",
"foldable",
"dollhouse",
"modelfurniture",
"ladder",
"scalemodel"
] | Toys & Games > Other Toys & Games | [
"297360/images/image_1_compressed.jpg",
"297360/images/image_2_compressed.jpg",
"297360/images/image_3_compressed.jpg",
"297360/images/image_4_compressed.jpg",
"297360/images/image_5_compressed.jpg"
] | [
"297360/stls/Foldable ladder front legs.stl",
"297360/stls/Foldable ladder lide.stl",
"297360/stls/front ladde back leg.stl"
] | CC0 | https://www.printables.com/model/297360 | data_0043.tar |
1667368 | Functional Medieval Catapult (Updated!) | <p>I saw a model on makerworld (credit to uhltimate) that used leaf springs for a functioning catapult and wanted to see if I could design it on my own, while understanding how every piece works and what its supposed to do, and I had to learn A LOT of new things to be able to design it but I finally got it finished :D.... | [
"trebuchet",
"medieval",
"catapult"
] | Toys & Games > Other Toys & Games | [
"1667368/images/image_1_compressed.jpg",
"1667368/images/image_2_compressed.jpg",
"1667368/images/image_3_compressed.jpg"
] | [
"1667368/stls/Medieval catapult PRINT FILE.stl",
"1667368/stls/Medieval catapult.stl"
] | CC-BY | https://www.printables.com/model/1667368 | data_0043.tar |
29638 | Functional spring w built-in support in the file. - Works with PLA | <p>Working flexible spring made from PLA filament<br/>
0.4mm nozzle<br/>
0.2mm Layer Height 10-20% infill<br/>
no raft was necessary to print<br/>
fun to watch the entire print wobble on the brink of destruction and then come out perfectly in the end.<br/>
tested 3 times successfully.</p>
| [] | Hobby & Makers > Mechanical Parts | [
"29638/images/image_1_compressed.jpg"
] | [
"29638/stls/springy20-v2.stl"
] | CC0 | https://www.printables.com/model/29638 | data_0043.tar |
587569 | Funko Pop Kinder Joy Harry Potter round mini stand (only the stand!!!) | <p>Nothing fancy, just a stick with a bum on the end, that stick through the stand. I pulled as far as I could, fixed it with superglue an cut the excess. This way the figures can still be removed.<br><br>Pictures there to help proper assembly.</p><p>Update: Mostly compatible with the quidditch set, but some needs some... | [
"mini",
"stand",
"dumbledore",
"potter",
"harry",
"harrypotter",
"pop",
"luna",
"kinder",
"funko",
"funkopop",
"joy",
"hagrid",
"draco",
"hermione",
"malfoy",
"ron",
"lovegood",
"snape",
"cho",
"kinderjoy",
"mcgonall",
"trelavney",
"mordon"
] | Hobby & Makers > Other Ideas | [
"587569/images/image_1_compressed.jpg",
"587569/images/image_2_compressed.jpg",
"587569/images/image_3_compressed.jpg",
"587569/images/image_4_compressed.jpg",
"587569/images/image_5_compressed.jpg",
"587569/images/image_6_compressed.jpg",
"587569/images/image_7_compressed.jpg",
"587569/images/image_8... | [
"587569/stls/Funko Pop Kinder Joy Harry Potter stand.stl"
] | CC0 | https://www.printables.com/model/587569 | data_0043.tar |
216231 | funny face magnets | <p>use 5x3mm magnets.</p> | [
"face",
"refrigerator",
"funny",
"eye",
"mouth",
"lips",
"magets"
] | Art & Design > 2D Plates & Logos | [
"216231/images/image_1_compressed.jpg",
"216231/images/image_2_compressed.jpg"
] | [
"216231/stls/eye.stl",
"216231/stls/mouth.stl"
] | CC0 | https://www.printables.com/model/216231 | data_0043.tar |
445894 | FurFinder - Apple AirTag Collar/Strap Attachment | <p>Track your furry friend with ease using this collar/strap attachment designed to hold an Apple AirTag. The ergonomically rounded corners ensure that your pet won't experience any irritation, and the minimal profile prevents the attachment from getting caught or tangled.</p><p>The screw-on cap design also allows you ... | [
"dog",
"pet",
"collar",
"dogtag",
"tag",
"cat",
"strap",
"airtag"
] | Household > Pets | [
"445894/images/image_1_compressed.jpg",
"445894/images/image_10_compressed.jpg",
"445894/images/image_11_compressed.jpg",
"445894/images/image_12_compressed.jpg",
"445894/images/image_13_compressed.jpg",
"445894/images/image_14_compressed.jpg",
"445894/images/image_15_compressed.jpg",
"445894/images/i... | [
"445894/stls/airtag-strap-attachment-09525.stl",
"445894/stls/airtag-strap-attachment-19050.stl",
"445894/stls/airtag-strap-attachment-25400.stl",
"445894/stls/airtag-strap-attachment-cover.stl"
] | CC-BY | https://www.printables.com/model/445894 | data_0043.tar |
1739724 | Furniture Shims | <p>If your furniture is not sitting level, put these shims under its feet.<br>If you need a different size, try altering the size in your slicer.</p><p>The bgcode is sliced for PLA filament, Prusa MK4S.</p><p></p><p>This design is available on <a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" hr... | [
"furniture",
"household",
"level",
"block",
"shim"
] | Household > Other House Equipment | [
"1739724/images/image_1_compressed.jpg"
] | [
"1739724/stls/Furniture_Shims.stl",
"1739724/stls/Shims Workshop Cabinet.stl"
] | CC0 | https://www.printables.com/model/1739724 | data_0043.tar |
160469 | Furniture Spacer/Washer | <p>Gotta get that new bedroom furniture anchored to the walls before somebody tips the stuff over. And it so happens that I'm low on metal hardware for the job. So I printed these obscenely thick washers, which double as spacers to hold each anchored item parallel to the wall. They work pretty slick. Print 'em solid.</... | [
"fastener",
"anchor"
] | Household > Bedroom | [
"160469/images/image_1_compressed.jpg",
"160469/images/image_2_compressed.jpg",
"160469/images/image_3_compressed.jpg",
"160469/images/image_4_compressed.jpg",
"160469/images/image_5_compressed.jpg"
] | [
"160469/stls/4-furniture-spacers.stl",
"160469/stls/furniture-spacer.stl"
] | CC0 | https://www.printables.com/model/160469 | data_0043.tar |
266491 | Fuse Box Cover Strip | <blockquote><p><a href="https://www.paypal.com/donate/?hosted_button_id=9G6LZUM2XH2YS"><strong>Support my Work with a little Donation</strong></a><strong> <img src="https://media.printables.com/media/prints/266491/rich_content/784e5355-8c58-4299-925b-a8289f2d0a28/herz.png#%7B%22uuid%22%3A%22850950b5-27fe-45df-a81b-23f2... | [
"cover",
"electronic",
"thingiverse",
"fuse",
"sicherung",
"sicherungskasten",
"abdeckstreifen",
"abdeckungen"
] | Hobby & Makers > Electronics | [
"266491/images/image_1_compressed.jpg",
"266491/images/image_2_compressed.jpg"
] | [
"266491/stls/0,5pcs.stl",
"266491/stls/10pcs.stl",
"266491/stls/11pcs.stl",
"266491/stls/12pcs.stl",
"266491/stls/13pcs.stl",
"266491/stls/14pcs.stl",
"266491/stls/15pcs.stl",
"266491/stls/1pcs.stl",
"266491/stls/2pcs.stl",
"266491/stls/3pcs.stl",
"266491/stls/4pcs.stl",
"266491/stls/5pcs.stl"... | CC-BY | https://www.printables.com/model/266491 | data_0043.tar |
406807 | FYSETC UCAN Bracket | <p>4x Heat Insert M3<br>2x M2x8 screw</p><p>4x M3x6 Screw</p><p>Used with Voron pcb_din_clip</p><p>Print settings: </p><p>3 perimeters</p><p>10%infill</p> | [
"bracket",
"din",
"voron",
"voronmod",
"canbus",
"fystec"
] | 3D Printers > Other Printer Parts & Upgrades | [
"406807/images/image_1_compressed.jpg",
"406807/images/image_2_compressed.jpg",
"406807/images/image_3_compressed.jpg",
"406807/images/image_4_compressed.jpg"
] | [
"406807/stls/FYSETC UCAN Bracket.stl"
] | CC0 | https://www.printables.com/model/406807 | data_0043.tar |
170915 | G scale coal pile | <p>This is a G scale model coal pile that fits into the POLA coal bunker. It is printed in a generic black PLA that I still had lying around.</p><p><strong>Update:</strong> After 2 months outside in the garden and in the sun, the PLA did deform a bit. The edge of the coal heap pulled away from the surrounding walls by ... | [
"modeltrain",
"modelrailway",
"gardenrailway",
"lgb",
"gscale",
"pola"
] | Hobby & Makers > Other Ideas | [
"170915/images/image_1_compressed.jpg",
"170915/images/image_2_compressed.jpg"
] | [
"170915/stls/lgb_kohlekran_bunkereinsatz.stl",
"170915/stls/lgb_kohlekran_bunkereinsatz_grob.stl"
] | CC-BY | https://www.printables.com/model/170915 | data_0043.tar |
73974 | G-Clamp for CNC 80mm and 140mm | <p>Those are great clamps, i'm using it everytime i use my CNC.</p><p>Enjoy :)</p><p>Edit: Added a V2 140mm clamp as requested</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Creality</p><p> </p><p><strong>Printer: </strong></p><p>Ender 3</p><p><strong>Rafts:</strong></p><p> </p><p>No<... | [
"cnc",
"clamp",
"thingiverse"
] | Hobby & Makers > Tools | [
"73974/images/image_1_compressed.jpg",
"73974/images/image_2_compressed.jpg",
"73974/images/image_3_compressed.jpg",
"73974/images/image_4_compressed.jpg",
"73974/images/image_5_compressed.jpg",
"73974/images/image_6_compressed.jpg"
] | [
"73974/stls/G-Clamp 140mm V2.stl",
"73974/stls/G-Clamp 140mm.stl",
"73974/stls/G-Clamp 80mm.stl"
] | CC-BY | https://www.printables.com/model/73974 | data_0043.tar |
412174 | G.D MKS Pi KlipperScreen Case and Stand for Ender3 V2, S1, SV06...etc | <p>Better print with the angles that I set up.</p><p>M2.5x5 for the Pi, M3x5 for the screen.</p><figure class="media"><oembed url="https://youtu.be/zIzcAjRycnA"></oembed></figure> | [] | 3D Printers > Accessories | [
"412174/images/image_1_compressed.jpg",
"412174/images/image_2_compressed.jpg",
"412174/images/image_3_compressed.jpg",
"412174/images/image_4_compressed.jpg",
"412174/images/image_5_compressed.jpg"
] | [
"412174/stls/ENDER3_BASE.stl",
"412174/stls/MKS_Pi_Cap_V2.stl",
"412174/stls/MKS_Pi_Case_V2.stl",
"412174/stls/MKS_Pi_Case_V2_CAP_(SV06).stl",
"412174/stls/STAND_For_ENDER.stl",
"412174/stls/STAND_For_SV06.stl",
"412174/stls/SV06_BASE.stl"
] | CC0 | https://www.printables.com/model/412174 | data_0043.tar |
947753 | G29 Clamp and Screw Replacement | <p>A replacement for your g29 clamps if they break. recommending using 50-90% infill and using sandpaper and some tweezers to remove supports.recommending using trees ports that only touches the build plate</p><p>Also it's smart to grind away the overhang failed filament, if not it may worsen the fit.</p><p> </p><... | [
"g29"
] | Hobby & Makers > Mechanical Parts | [
"947753/images/image_1_compressed.jpg"
] | [
"947753/stls/G29 Clamp Replasment.stl",
"947753/stls/G29 Clamp Srew Replasment.stl"
] | CC-BY | https://www.printables.com/model/947753 | data_0043.tar |
345031 | Gaggia Classic Pro Dosing Funnel with magnets | <p>The OG model is perfect , but I wanted to add these magnets for a better hold on the funnel, especially during wdt.</p><p>This should take 2 6x3 mm magnets, and the grip is pretty good</p> | [
"portafilterfunnel",
"dosingfunnel",
"58mmdosingfunnel",
"gaggiafunnel"
] | Household > Kitchen | [
"345031/images/image_1_compressed.jpg",
"345031/images/image_2_compressed.jpg"
] | [
"345031/stls/gaggia funnel mags.stl"
] | CC-BY | https://www.printables.com/model/345031 | data_0043.tar |
441184 | Galaxy Buds Skadis mount | <p>A mount for the Ikea Skadis peg board that holds first generation Samsung Galaxy buds. </p><h3><strong>Printing</strong></h3><p>The model should lay flat on its side, with supports enabled. Use at least 3 walls to help strengthen the hooks </p><figure class="image image_resized image-style-align-left" styl... | [
"samsung",
"skadis",
"samsunggalaxybuds",
"galaxybuds"
] | Hobby & Makers > Organizers | [
"441184/images/image_1_compressed.jpg",
"441184/images/image_2_compressed.jpg",
"441184/images/image_3_compressed.jpg",
"441184/images/image_4_compressed.jpg",
"441184/images/image_5_compressed.jpg"
] | [
"441184/stls/Galaxy Buds Skadis.stl"
] | CC-BY | https://www.printables.com/model/441184 | data_0043.tar |
267037 | Galaxy Knife Holder | <p>This is a knife holder on stand suitable to hold up to 5 knifes. </p><p>It needs a bit of support touching build plate for successful print. </p><p>It is made as single object to avoid adhesion issues or need for any additional material like magnets, glue, screws etc. Simple slice and print.</p><p>The one ... | [
"kitchen",
"knife",
"accessory",
"helpful",
"knifeholder",
"knifeblock"
] | Household > Kitchen | [
"267037/images/image_1_compressed.jpg",
"267037/images/image_2_compressed.jpg",
"267037/images/image_3_compressed.jpg",
"267037/images/image_4_compressed.jpg",
"267037/images/image_5_compressed.jpg",
"267037/images/image_6_compressed.jpg",
"267037/images/image_7_compressed.jpg"
] | [
"267037/stls/Knife holder V2.stl",
"267037/stls/Knife holder.stl"
] | GPL3.0 | https://www.printables.com/model/267037 | data_0043.tar |
260718 | Galaxy Watch 4&5 screen protection glass tool (44 mm) | <p>A tool to help you properly align and install the safety tempered glass on the Samsung Galaxy Watch4 & Watch5 (44mm).</p><p>Easy to 3D print and install (see the attached images).</p><p>When installing glass, firstly put on the tool and rotate it until it is fixed and centered. Then press in the safety glass.</p... | [
"tool",
"samsung",
"screen",
"protection",
"glass",
"44mm",
"watch4",
"watch5"
] | Gadgets > Portable Devices | [
"260718/images/image_1_compressed.jpg",
"260718/images/image_2_compressed.jpg"
] | [
"260718/stls/GW40mm-screen.stl"
] | CC-BY | https://www.printables.com/model/260718 | data_0043.tar |
1127675 | Galileo 2 Filament sensor D2HW-C201H | <h3><strong>Galileo 2 Remix with Pre-Extruder Gear Filament Sensor</strong></h3><h5>For the most up to date version of this mod please visit <a href="https://github.com/Ntrondle/Galileo2_D2HW">Github</a>.</h5><p> </p><h4><strong>Description:</strong></h4><p>This is a remix of the <a href="https://github.com/JaredC... | [
"runoutsensor",
"galileo2"
] | 3D Printers > Voron Parts & Upgrades | [
"1127675/images/image_1_compressed.jpg",
"1127675/images/image_2_compressed.jpg"
] | [
"1127675/stls/D2HW-retension.stl",
"1127675/stls/front_body_ECAS_coupler_D2HW.stl"
] | GPL3.0 | https://www.printables.com/model/1127675 | data_0043.tar |
473282 | Galileo Galilei statue | <p>Statue of Galileo Galilei. Original by Pio Fedi. Found inside the main entrance to the Lanyon building of Queen's University Belfast.</p>
<p>About the statue:</p>
<p>"A colossal statue in Carrara marble. The celebrated astronomer is represented</p>
<p>in the prison of the Inquisition sitting on a stool; a map of the... | [
"photogrammetry",
"scan",
"statue",
"sculpture",
"science",
"history",
"museum",
"thingiverse",
"scientist",
"galileo"
] | World & Scans > People | [
"473282/images/image_1_compressed.jpg",
"473282/images/image_2_compressed.jpg",
"473282/images/image_3_compressed.jpg",
"473282/images/image_4_compressed.jpg"
] | [
"473282/stls/galileo_sculpt_v5.stl"
] | CC0 | https://www.printables.com/model/473282 | data_0043.tar |
392019 | Gallon/Sandwich Bag Holder | <p>This is an adjustable Ziploc bag holder. 20% infill is plenty. Fit is a bit tight but will loosen with time.</p> | [
"kitchen",
"opener",
"holder",
"stand",
"clip",
"adjustable",
"home",
"bags",
"one",
"gallon",
"sandwich",
"ziploc",
"ziplock",
"handsfree",
"onehanded"
] | Household > Kitchen | [
"392019/images/image_1_compressed.jpg",
"392019/images/image_2_compressed.jpg",
"392019/images/image_3_compressed.jpg"
] | [
"392019/stls/Bag holder.stl"
] | CC0 | https://www.printables.com/model/392019 | data_0043.tar |
913712 | Game and Watch Stand | <p>Game and Watch Stand. Prints easily on its side.</p> | [] | Gadgets > Other Gadgets | [
"913712/images/image_1_compressed.jpg",
"913712/images/image_2_compressed.jpg"
] | [
"913712/stls/Game & Watch Stand.stl"
] | CC-BY | https://www.printables.com/model/913712 | data_0043.tar |
71658 | Game Boy Classic/DMG Display Stand | <p>Remixed by adding 4 slots for games</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3</p></div><strong>Rafts:</strong></p>
<p>No</p>
<p><p class="detail-setting supports"><strong>Supports: </strong> <div... | [
"display",
"stand",
"boy",
"game",
"gameboy",
"nintendo",
"videogame",
"retro",
"games",
"thingiverse",
"displaystand",
"gameboycolor",
"gameboyadvance"
] | Gadgets > Video Games | [
"71658/images/image_1_compressed.jpg",
"71658/images/image_2_compressed.jpg",
"71658/images/image_3_compressed.jpg",
"71658/images/image_4_compressed.jpg",
"71658/images/image_5_compressed.jpg"
] | [
"71658/stls/GameboyStandV2_v1.stl"
] | CC-BY | https://www.printables.com/model/71658 | data_0043.tar |
837674 | Game Controller Wall Art | <p>Modeled after a modern PlayStation controller, there are two versions available: one with an offset design and one without. The version with the offset features support for LED strips and a cable output from the bottom. This unique wall art piece not only pays homage to gaming culture but also adds a touch of contem... | [
"decoration",
"wall",
"game",
"decor",
"art",
"minecraft",
"fortnite",
"roblox",
"controllerholder",
"gameroom",
"gamesinsert"
] | Art & Design > Wall-mounted | [
"837674/images/image_1_compressed.jpg",
"837674/images/image_2_compressed.jpg",
"837674/images/image_3_compressed.jpg"
] | [
"837674/stls/Controller No Led No Offset.stl",
"837674/stls/Controller with Offset and light.stl"
] | GPL3.0 | https://www.printables.com/model/837674 | data_0043.tar |
1748228 | Game dice | [
"games",
"dice"
] | Toys & Games > Board Games | [
"1748228/images/image_1_compressed.jpg"
] | [
"1748228/stls/dame dice 2cm.stl",
"1748228/stls/game dice 1,6cm.stl",
"1748228/stls/game dice 1cm.stl"
] | CC-BY | https://www.printables.com/model/1748228 | data_0043.tar | |
1548065 | Game Dice in 20 Sizes (5 mm – 200 mm) | <p><strong>Description:</strong></p><p>Dice in 20 different sizes – from 5 mm up to 200 mm edge length. Perfect for board games, decoration, or creative projects.<br><strong>Special feature:</strong> STEP files without numbers are included so you can customize or add your own designs.</p><p><strong>Print Settings:</str... | [
"maker",
"decoration",
"print",
"small",
"game",
"gaming",
"board",
"model",
"large",
"dice",
"customizable",
"die",
"accessories",
"models",
"kostka",
"kocka",
"editable",
"dado",
"kostky",
"zar",
"kubik",
"dobbelsteen",
"emkatech",
"emkatechgmbh",
"noppa",
"ternin... | Toys & Games > Board Games | [
"1548065/images/image_1_compressed.jpg",
"1548065/images/image_2_compressed.jpg",
"1548065/images/image_3_compressed.jpg",
"1548065/images/image_4_compressed.jpg"
] | [
"1548065/stls/ASM-Dice.stl",
"1548065/stls/Dice 100mm.stl",
"1548065/stls/Dice 10mm.stl",
"1548065/stls/Dice 120mm.stl",
"1548065/stls/Dice 140mm.stl",
"1548065/stls/Dice 15mm.stl",
"1548065/stls/Dice 160mm.stl",
"1548065/stls/Dice 180mm.stl",
"1548065/stls/Dice 200mm.stl",
"1548065/stls/Dice 20mm... | GPL2.0 | https://www.printables.com/model/1548065 | data_0043.tar |
361518 | Game Face Trion Safety Delete | <p>Safety Delete for the GameFace Trion dart blaster</p><p> </p><p>fills in the hole where the safety switch used to be</p><p> </p><p>print standing vertically on end.</p> | [
"nerfmod",
"gameface",
"trion"
] | Toys & Games > Outdoor Toys | [
"361518/images/image_1_compressed.jpg"
] | [
"361518/stls/trionSafety.stl"
] | CC-BY | https://www.printables.com/model/361518 | data_0043.tar |
218717 | Game Prototyping Stencil | <p>Want to prototype levels for a game on paper, but it always turns out to be a scribbly mess? Already 10 hours into a game jam and your artist still hasn't finished the tileset? On the go and got a killer idea for a level? This stencil will help you create clean looking prototypes quickly. </p><p>Works best with... | [
"game",
"video",
"drawing",
"stencil",
"logos",
"development",
"gamedev"
] | Art & Design > 2D Plates & Logos | [
"218717/images/image_1_compressed.jpg"
] | [
"218717/stls/stencilv3.stl"
] | CC0 | https://www.printables.com/model/218717 | data_0043.tar |
301714 | GameBoy Cartridge |
<p>Just a GameBoy cartridge. I've printed it out with perfect success. Let me know if you have any questions or suggestions. Enjoy.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Ender 3</p></div>
<p><strong>Raft... | [
"gameboy",
"cartridge",
"replacement",
"fix",
"thingiverse",
"accurate"
] | Toys & Games > Other Toys & Games | [
"301714/images/image_1_compressed.jpg",
"301714/images/image_2_compressed.jpg",
"301714/images/image_3_compressed.jpg",
"301714/images/image_4_compressed.jpg"
] | [
"301714/stls/Back.stl",
"301714/stls/Front.stl"
] | CC-BY | https://www.printables.com/model/301714 | data_0043.tar |
515567 | GameBoy Game Stand | <p>Expositor para cartuchos de GameBoy.</p><p>Tinkercad: <a href="https://bit.ly/3ibnyRA">https://bit.ly/3ibnyRA</a><br>Fotos: <a href="https://bit.ly/4c17HiN">https://bit.ly/4c17HiN</a></p> | [] | Toys & Games > Other Toys & Games | [
"515567/images/image_1_compressed.jpg",
"515567/images/image_2_compressed.jpg",
"515567/images/image_3_compressed.jpg",
"515567/images/image_4_compressed.jpg",
"515567/images/image_5_compressed.jpg",
"515567/images/image_6_compressed.jpg"
] | [
"515567/stls/GameBoy Game Stand.stl"
] | CC-BY | https://www.printables.com/model/515567 | data_0043.tar |
188321 | GameCube Bottom Shell 1:1 Exact Copy | <p>This is a 1:1 recreation of the GameCube Bottom Shell top. more parts of the GameCube on the way. this is about 90% accurate but will fit OEM parts as well. I can't guarantee that a Gameboy player and modem adapter will fit since i do not own to test. however, the OEM covers do fit.</p>
<h3>Print Settings</h3>
<p><s... | [
"base",
"shell",
"thingiverse",
"gamecube",
"nintendogamecube"
] | Hobby & Makers > Electronics | [
"188321/images/image_1_compressed.jpg",
"188321/images/image_2_compressed.jpg",
"188321/images/image_3_compressed.jpg",
"188321/images/image_4_compressed.jpg"
] | [
"188321/stls/GameCube Shell Base v3.2.stl",
"188321/stls/GameCube Shell Base v4.stl"
] | CC-BY | https://www.printables.com/model/188321 | data_0043.tar |
1171228 | Gamecube Controller Gashapon Keychain | <p>3D print your own Gamecube Controller gashapon shells!</p><p>This will allow you create custom keychains using OEM/compatible buttons and sticks.</p><p>This design is based of off 3D scans and are very close to the shells produced by Nintendo.</p><p>Edit 8/1/2025: Adding .step files of the shells</p><p>If you'd like... | [
"nintendo",
"keychain",
"gashapon",
"gamecube"
] | Gadgets > Video Games | [
"1171228/images/image_1_compressed.jpg",
"1171228/images/image_2_compressed.jpg",
"1171228/images/image_3_compressed.jpg",
"1171228/images/image_4_compressed.jpg",
"1171228/images/image_5_compressed.jpg",
"1171228/images/image_6_compressed.jpg"
] | [
"1171228/stls/GCC_CStickCharm_LowerShell.stl",
"1171228/stls/GCC_CStickCharm_MidFrame.stl",
"1171228/stls/GCC_CStickCharm_UpperShell.stl",
"1171228/stls/GCC_FaceButtonCharm_LowerShell.stl",
"1171228/stls/GCC_FaceButtonCharm_MidFrame.stl",
"1171228/stls/GCC_FaceButtonCharm_UpperShell.stl"
] | CC-BY | https://www.printables.com/model/1171228 | data_0043.tar |
194142 | GameCube Controller Plate Shell 1:1 Exact Copy |
<p>This is a 1:1 recreation of the GameCube Controller Plate Shell. more parts of the GameCube on the way. this is about 95% accurate but will fit OEM parts as well.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p... | [
"nintendo",
"controller",
"shell",
"thingiverse",
"gamecube",
"nintendogamecube",
"controllerplate"
] | Hobby & Makers > Electronics | [
"194142/images/image_1_compressed.jpg",
"194142/images/image_2_compressed.jpg",
"194142/images/image_3_compressed.jpg",
"194142/images/image_4_compressed.jpg"
] | [
"194142/stls/GameCube_Controller_Plate_v2.stl"
] | CC-BY | https://www.printables.com/model/194142 | data_0043.tar |
141638 | GameCube Fan Mod |
<p>This mod uses a custom 3d printed fan mount for the GameCube, which allows you to install a standard 50mm x 10mm PC fan.</p>
<p>The mod was created with the intention to use a quieter fan than the original system fan, but it also provides a means to replace failing parts in a system that is almost twenty years ol... | [
"thingiverse",
"gamecube"
] | Gadgets > Other Gadgets | [
"141638/images/image_1_compressed.jpg",
"141638/images/image_2_compressed.jpg",
"141638/images/image_3_compressed.jpg",
"141638/images/image_4_compressed.jpg"
] | [
"141638/stls/GameCube_Fan_Bracket_1.1.stl"
] | CC-BY | https://www.printables.com/model/141638 | data_0043.tar |
492640 | Gaming Spoon | <p>Here's a heavy duty gaming spoon ready to handle all your spoon related games!</p><p>if you don’t know what I’m talking about see below:</p><p><a href="https://bicyclecards.com/how-to-play/spoons">https://bicyclecards.com/how-to-play/spoons</a></p><p>Don't bend your metal spoons and disposable plastic spoons break! ... | [
"party",
"games",
"spoon",
"cardgame",
"heavyduty",
"cardgames",
"spoons",
"familygames",
"partygame",
"partygames",
"familygame"
] | Toys & Games > Other Toys & Games | [
"492640/images/image_1_compressed.jpg",
"492640/images/image_2_compressed.jpg"
] | [
"492640/stls/Gaming_Spoon.stl",
"492640/stls/Gaming_Spoon_Plain.stl"
] | CC-BY | https://www.printables.com/model/492640 | data_0043.tar |
882547 | Gandalf Lord of the Rings Wall Art | <p>Gandalf Lord of the Rings Wall Art</p> | [] | Art & Design > Wall-mounted | [
"882547/images/image_1_compressed.jpg"
] | [
"882547/stls/Gandalf Lord of the Rings Wall Art.stl"
] | CC-BY | https://www.printables.com/model/882547 | data_0043.tar |
824358 | Garage Door Handle | <p>garage door knob. </p><p>The passage of the cord is designed to distribute the pulling force evenly. </p><p>The filling is Gyroid type</p><p> </p><p>I've printed with this parameter:</p><p> </p><ul><li>Material PLA+</li><li>Speed 00mm/s</li><li>infill 25%</li><li>layer height 0.20</li></ul> | [
"knob",
"handle",
"garage"
] | Household > Garage | [
"824358/images/image_1_compressed.jpg",
"824358/images/image_2_compressed.jpg"
] | [
"824358/stls/Pomello garage.stl"
] | CC0 | https://www.printables.com/model/824358 | data_0043.tar |
551152 | Garden Gnome on a Bike Repaired and Reinforced | <p>Fixed through netfabb as the original file had some internal gaps causing improper infill/support material use. Then added a bar between the handlebars as my first print had the left handlebar break off easily. Then added a small cylinder to repair the right side of the glasses around the hair.</p> | [] | Art & Design > Sculptures | [
"551152/images/image_1_compressed.jpg"
] | [
"551152/stls/Garden_Gnome_on_a_Bike Repaired and Reinforced.stl",
"551152/stls/Garden_Gnome_on_a_Bike.stl"
] | CC-BY | https://www.printables.com/model/551152 | data_0043.tar |
465725 | Garden hose connector | <p>printet from PETG with bed support</p> | [
"hose"
] | Household > Outdoor & Garden | [
"465725/images/image_1_compressed.jpg"
] | [
"465725/stls/garden_hose_conn.stl"
] | GPL2.0 | https://www.printables.com/model/465725 | data_0043.tar |
613925 | Garden Hose Corner Guide | One print, roller print in place. | Download free 3D printable STL models | [
"plant",
"watering",
"spring",
"garden",
"guide",
"roller",
"hose",
"flowers",
"summer"
] | Household > Outdoor & Garden | [
"613925/images/image_1_compressed.jpg"
] | [
"613925/stls/hoseroller.stl"
] | CC0 | https://www.printables.com/model/613925 | data_0043.tar |
517590 | Garden Hose Stake | <p>Longer and more sturdy.</p><p>Printed with PETg with high infill.</p><p>Recommend waiting until ground is good and wet, then may want to use mallet.</p> | [] | Household > Outdoor & Garden | [
"517590/images/image_1_compressed.jpg"
] | [
"517590/stls/soaker_hose_spike.stl"
] | CC-BY | https://www.printables.com/model/517590 | data_0043.tar |
245426 | Garden Hose Stake/Keeper | <p>A quick and easy print . </p><p>Keeps water hose in place (Usually close to house.</p><p>Recommend using PETg as it is for outdoores (or use in shaded area)</p><p>No supports, rafts, brims, etc.</p><p>Modify infill to suit your needs.</p><p>Recommend waiting until ground is somewhat soft, or water it well.</p> | [
"watering",
"stake",
"stakes",
"lawnsprinkler"
] | Household > Outdoor & Garden | [
"245426/images/image_1_compressed.jpg"
] | [
"245426/stls/Single_Hose_Keeper.stl"
] | CC-BY | https://www.printables.com/model/245426 | data_0043.tar |
928728 | Garden stake for landscape fabric or tomatoes | <p>When printed with 3 walls and 30% concentric infill they are nice and strong. </p><p>I use PLA because it's biodegradable. </p> | [
"garden",
"tomato",
"stake",
"trellis",
"landscapefabric"
] | Household > Outdoor & Garden | [
"928728/images/image_1_compressed.jpg"
] | [
"928728/stls/Stake -no support.stl"
] | CC-BY | https://www.printables.com/model/928728 | data_0043.tar |
488384 | Garden watering can sprinkler / Kropítko na zahradní konev | Garden watering can sprinkler / Kropítko na zahradní konev | Download free 3D printable STL models | [
"watering",
"garden",
"sprinkler",
"konev",
"zahrada"
] | Household > Outdoor & Garden | [
"488384/images/image_1_compressed.jpg",
"488384/images/image_2_compressed.jpg",
"488384/images/image_3_compressed.jpg",
"488384/images/image_4_compressed.jpg",
"488384/images/image_5_compressed.jpg",
"488384/images/image_6_compressed.jpg"
] | [
"488384/stls/GiesskanneDüseV2.stl"
] | CC-BY | https://www.printables.com/model/488384 | data_0043.tar |
498140 | Gardena hoze adapter | <p>The material should definitely be petG with 0.2 layers, unfortunately it needs a lot of support</p> | [] | Household > Outdoor & Garden | [
"498140/images/image_1_compressed.jpg"
] | [
"498140/stls/slag csati.stl"
] | CC0 | https://www.printables.com/model/498140 | data_0043.tar |
215709 | Gardena micro drip 3/16" hose clamp | [
"gardena",
"gardenamicrodrip"
] | Household > Outdoor & Garden | [
"215709/images/image_1_compressed.jpg",
"215709/images/image_2_compressed.jpg",
"215709/images/image_3_compressed.jpg"
] | [
"215709/stls/gardena_hose_holder v3.stl"
] | CC0 | https://www.printables.com/model/215709 | data_0043.tar | |
453896 | Gardena Micro drip holder | <p>Gardena micro drip hose holder</p>
<h3>Print Settings</h3>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-setting supports"><strong>Supports: </strong>
<div><p>No</p></div>
<p><strong>Resolution:</strong></p>
<p>0,19</p>
</p>
Category: Replacement Parts | [
"selfwatering",
"watering",
"gardena",
"gardening",
"thingiverse",
"plantwatering"
] | Household > Other House Equipment | [
"453896/images/image_1_compressed.jpg",
"453896/images/image_2_compressed.jpg"
] | [
"453896/stls/Gardena.stl"
] | CC-BY | https://www.printables.com/model/453896 | data_0043.tar |
204764 | Gardena Micro-Drip hose spike | [
"gardena",
"hose"
] | Household > Outdoor & Garden | [
"204764/images/image_1_compressed.jpg"
] | [
"204764/stls/half_inch_hose_spike v4.stl"
] | CC0 | https://www.printables.com/model/204764 | data_0043.tar | |
933834 | Gardena microdrip longer holder | [
"watering",
"garden",
"gardena"
] | Household > Outdoor & Garden | [
"933834/images/image_1_compressed.jpg",
"933834/images/image_2_compressed.jpg"
] | [
"933834/stls/gardena-longer holder.stl"
] | CC-BY | https://www.printables.com/model/933834 | data_0043.tar | |
836717 | Gardena Pipe Pegs 13mm | <p>You can mount the Gardena MicroDrip 13mm system wherever you want.</p><p>Thanks, Enjoy!</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Prusa</p><p><strong>Printer: </strong></p><p>MK3S</p><p><strong>Supports:</strong></p><p>No</p><p><strong>Resolution: </strong></p><p>0,3</p><p><strong>... | [
"gardena",
"pipe",
"pegs"
] | Household > Outdoor & Garden | [
"836717/images/image_1_compressed.jpg",
"836717/images/image_2_compressed.jpg",
"836717/images/image_3_compressed.jpg",
"836717/images/image_4_compressed.jpg"
] | [
"836717/stls/Gardena_Pipe_Pegs_13mm.stl"
] | CC-BY | https://www.printables.com/model/836717 | data_0043.tar |
61940 | Gardening Signs | <p>Gardening Signs for a vegetable patch. You find a empty template in f3d format for your own vegetables and fruits. Printed with PETG to make the signs weatherproof.</p><p>Font: Aleo → <a href="https://fonts.google.com/specimen/Aleo?preview.text_type=custom">https://fonts.google.com/specimen/Aleo?preview.text_type=cu... | [
"sign",
"garden",
"patch",
"gardening",
"garten",
"vegetable",
"gemuese",
"beet"
] | Household > Outdoor & Garden | [
"61940/images/image_1_compressed.jpg",
"61940/images/image_2_compressed.jpg"
] | [
"61940/stls/Beschriftung Gemüsebeet Chilli.stl",
"61940/stls/Beschriftung Gemüsebeet Gurke.stl",
"61940/stls/Beschriftung Gemüsebeet Himbeeren.stl",
"61940/stls/Beschriftung Gemüsebeet Kohlrabi.stl",
"61940/stls/Beschriftung Gemüsebeet Kürbis.stl",
"61940/stls/Beschriftung Gemüsebeet Lauchzwiebeln.stl",
... | CC0 | https://www.printables.com/model/61940 | data_0043.tar |
331826 | Gardyn yCube Cover | <p>0.3mm PETG recommended</p> | [
"hydroponic",
"gardyn"
] | Household > Outdoor & Garden | [
"331826/images/image_1_compressed.jpg",
"331826/images/image_2_compressed.jpg",
"331826/images/image_3_compressed.jpg"
] | [
"331826/stls/Gardyn yCube Cover.stl"
] | CC0 | https://www.printables.com/model/331826 | data_0043.tar |
1252988 | Gargoyle | [
"gargoyle"
] | Tabletop Miniatures > Characters & Monsters | [
"1252988/images/image_1_compressed.jpg"
] | [
"1252988/stls/Stone_Gargoyle.stl"
] | CC0 | https://www.printables.com/model/1252988 | data_0043.tar | |
1435687 | Gargoyles high quality | <p>Gargoyles high quality</p> | [
"gargoyle"
] | Toys & Games > Action Figures & Statues | [
"1435687/images/image_1_compressed.jpg"
] | [
"1435687/stls/gargoylesfinalv1.stl"
] | CC0 | https://www.printables.com/model/1435687 | data_0043.tar |
894977 | Garmin Edge desk stand | <p>This stand will hold your Garmin Edge cycling computer on your trainer desk so that you can keep an eye on your metrics while you train. It has a hole for Edge 520 computer charge cords to keep the backlight on. It has features to slide into the grooves of any Garmin quarter turn mount boss.</p> | [
"garminedge",
"garminmount",
"bikecomputermount"
] | Sports & Outdoor > Indoor Sports | [
"894977/images/image_1_compressed.jpg",
"894977/images/image_2_compressed.jpg",
"894977/images/image_3_compressed.jpg",
"894977/images/image_4_compressed.jpg",
"894977/images/image_5_compressed.jpg",
"894977/images/image_6_compressed.jpg",
"894977/images/image_7_compressed.jpg"
] | [
"894977/stls/Garmin Edge desk stand.stl"
] | GPL2.0 | https://www.printables.com/model/894977 | data_0043.tar |
78481 | Garmin Oregon 600 navigation button fix. (Oprava tlačítek navigace Garmin Oregon 600) | <p>The Garmin Oregon 600 Navigation is otherwise a sturdy device but may become non-functional due to the degradation of rubber buttons over time. The recommendation from the manufacturer is to buy a new device, which is very environmentally friendly, right?</p><p>This problem can be easily solved by using a 3D printer... | [
"repair",
"keys",
"garmin",
"navigation"
] | Hobby & Makers > Electronics | [
"78481/images/image_1_compressed.jpg",
"78481/images/image_2_compressed.jpg",
"78481/images/image_3_compressed.jpg",
"78481/images/image_4_compressed.jpg",
"78481/images/image_5_compressed.jpg"
] | [
"78481/stls/GarminOregon600Tlactka.stl",
"78481/stls/TlaĒtko_1.stl",
"78481/stls/TlaĒtko_2.stl"
] | CC-BY | https://www.printables.com/model/78481 | data_0043.tar |
1006120 | Garmin Varia mount for Canyon Aeroad / SP0077 (screws into seatpost) | <p>Stuff you'll need:</p><ul><li>1x Garmin insert (I took the one that came in the box, remove and keep the 2x M3 screws)</li><li>2x M4x8 SHCS such as these - <a href="https://boltdepot.com/Product-Details?product=6392">https://boltdepot.com/Product-Details?product=6392</a></li></ul><p>Start by screwing the printed mod... | [
"garmin",
"canyon",
"varia",
"aeroad",
"sp0077"
] | Sports & Outdoor > Outdoor Sports | [
"1006120/images/image_1_compressed.jpg",
"1006120/images/image_2_compressed.jpg",
"1006120/images/image_3_compressed.jpg",
"1006120/images/image_4_compressed.jpg",
"1006120/images/image_5_compressed.jpg"
] | [
"1006120/stls/sp0077-garmin-varia.stl"
] | CC-BY | https://www.printables.com/model/1006120 | data_0043.tar |
933631 | gas can cap | <p>gas can cap </p> | [] | Household > Garage | [
"933631/images/image_1_compressed.jpg",
"933631/images/image_2_compressed.jpg"
] | [
"933631/stls/gas cap v6.stl"
] | CC0 | https://www.printables.com/model/933631 | data_0043.tar |
390622 | Gas Can Vent Cap Wedco 84003 | <p>This is a direct replacement for the Wedco 84003 gas can vent cap. The thread pitch is 3mm and the other diameter of the male threads is approx 22mm.</p><p>The plain cap should be printed with it's top touching the build surface and no supports. </p><p>The model with ‘wings’ may be printed upside down with mini... | [
"can",
"cap",
"screw",
"vent",
"gas",
"threaded",
"gascan",
"wedco"
] | Household > Outdoor & Garden | [
"390622/images/image_1_compressed.jpg",
"390622/images/image_2_compressed.jpg",
"390622/images/image_3_compressed.jpg",
"390622/images/image_4_compressed.jpg",
"390622/images/image_5_compressed.jpg"
] | [
"390622/stls/Wedco 84003 Wings, Tether.stl",
"390622/stls/Wedco 84003 Wings.stl",
"390622/stls/Wedco 84003.stl"
] | CC-BY | https://www.printables.com/model/390622 | data_0043.tar |
251389 | Gas Refill Adapter | <p>None of the adapters which came along with the gas cartridge fitted my kitchen gas torch, so I quickly modeled a working one in Fusion 360.<br><br>Inner diameter base: 3mm</p><p>Inner diameter torch: 2.25mm</p><p>Modify the Fusion 360 sketches to your needs.</p> | [
"kitchen",
"cartridge",
"lighter",
"adapter",
"safety",
"refill",
"gas",
"torch",
"propane",
"butan"
] | Hobby & Makers > Mechanical Parts | [
"251389/images/image_1_compressed.jpg",
"251389/images/image_2_compressed.jpg",
"251389/images/image_3_compressed.jpg",
"251389/images/image_4_compressed.jpg"
] | [
"251389/stls/Gas Refill Adapter v1.stl"
] | CC0 | https://www.printables.com/model/251389 | data_0043.tar |
208578 | Gator Gripper | <p>Gator done with the Gator Gripper!</p><p>This quick print can be used for dozens of uses:</p><ul><li>Rope tensioner</li><li>Bag clip</li><li>Filament spool clip</li><li>General retainer for random stuff (like vinyl rolls)</li><li>Bookmark</li><li>Paperclip</li><li>Clothes line hanger</li><li>Hanging a lantern while ... | [
"functional",
"quickprint",
"tensioner",
"bagclip",
"paperclip",
"filamentclip",
"camping",
"paracord",
"rope",
"chipclip",
"cableorganization",
"clothesline"
] | Household > Outdoor & Garden | [
"208578/images/image_1_compressed.jpg",
"208578/images/image_2_compressed.jpg",
"208578/images/image_3_compressed.jpg",
"208578/images/image_4_compressed.jpg",
"208578/images/image_5_compressed.jpg",
"208578/images/image_6_compressed.jpg",
"208578/images/image_7_compressed.jpg"
] | [
"208578/stls/gator-grip-030mm.stl"
] | CC-BY | https://www.printables.com/model/208578 | data_0043.tar |
141633 | GDEMU Remote SD Card Mount |
<p>Update March 17th 2020</p>
<p>New version with some screw hole placement fixes v1.4</p>
<p>Also the release of the back lit button fit a normal 5mm led into the holder and wire it up.</p>
<p>My remote SD mount consists of three pieces.</p>
<p>GDEMU SD Mount 1.2.stl</p>
<p>GDEMU SD Mount Bracket 1.2.stl</p>
<p>GDE... | [
"thingiverse",
"segadreamcast",
"dreamcast",
"gdemu"
] | Gadgets > Other Gadgets | [
"141633/images/image_1_compressed.jpg",
"141633/images/image_10_compressed.jpg",
"141633/images/image_11_compressed.jpg",
"141633/images/image_12_compressed.jpg",
"141633/images/image_2_compressed.jpg",
"141633/images/image_3_compressed.jpg",
"141633/images/image_4_compressed.jpg",
"141633/images/imag... | [
"141633/stls/GDEMU_Button_LED_holder.stl",
"141633/stls/GDEMU_SD_button_1.2.stl",
"141633/stls/GDEMU_SD_button_LED_Backlit.stl",
"141633/stls/GDEMU_SD_mount.1.2.stl",
"141633/stls/gdemu_SD_mount.1.4_-_Copy.stl",
"141633/stls/GDEMU_SD_mount_bracket_1.2.stl",
"141633/stls/GDEMU_sd_mount_bracket_clone_9.4m... | CC-BY | https://www.printables.com/model/141633 | data_0043.tar |
125617 | Gear bearing spinner | <p>A fidget spinner remix of the <a href="https://www.printables.com/model/114535-perfect-gear-bearing">"Perfect gear bearing" by Gamma4D</a>. Comes in 2 variants that is with or without added M10 nuts as weight in the branches.</p><p>Add a pause at 12mm height with PrusaSlicer to insert 3x M10 nut then resume printing... | [
"fidget",
"gear"
] | Toys & Games > Other Toys & Games | [
"125617/images/image_1_compressed.jpg",
"125617/images/image_2_compressed.jpg",
"125617/images/image_3_compressed.jpg"
] | [
"125617/stls/gear_bearing_spinner.stl",
"125617/stls/gear_bearing_spinner_wnut.stl"
] | CC0 | https://www.printables.com/model/125617 | data_0043.tar |
1170183 | Gear shelf bracket | <p>I built a large static display model train and wanted a shelf bracket that would match. It needed to be strong and while I liked many of the existing gear brackets, none of them seemed quite right. Using TinkerCAD, I leveraged their Shape Generator for the gears and then put in some holes for screwdriver acces... | [
"shelf",
"bracket"
] | Household > Living Room | [
"1170183/images/image_1_compressed.jpg"
] | [
"1170183/stls/Gear shelf bracket.stl"
] | CC0 | https://www.printables.com/model/1170183 | data_0043.tar |
191288 | Geared Rope Maker | <p>This is my first attempt at a geared rope maker.</p><p>Notes:</p><ul><li>The screws are pretty weak, so you may be better off with nylon ones.</li><li>At 0.25 layer height, the screws should not need post-processing, but the threaded holes will.</li><li>For best results you either need a M6x1 tap, or a metal M6x1 sc... | [
"gears",
"thingiverse",
"ropemaker"
] | Hobby & Makers > Tools | [
"191288/images/image_1_compressed.jpg",
"191288/images/image_2_compressed.jpg",
"191288/images/image_3_compressed.jpg",
"191288/images/image_4_compressed.jpg",
"191288/images/image_5_compressed.jpg"
] | [
"191288/stls/Bottom_Plate_v7.stl",
"191288/stls/Rope_Guide_v7.stl",
"191288/stls/Rope_Maker_v12_Not_Printable.stl",
"191288/stls/Set_1x_Drive_Gear_v2_3x_Hook_Gears_v12.stl",
"191288/stls/Set_4x_M6x1x13_Screws_v8.stl",
"191288/stls/Top_Plate_v7.stl"
] | CC-BY | https://www.printables.com/model/191288 | data_0043.tar |
58694 | Gearwrench 10pc Ratchet Wrench Organizer - Metric Handle | <p>Added a Handle</p>
Category: Tool Holders & Boxes | [
"thingiverse"
] | Hobby & Makers > Organizers | [
"58694/images/image_1_compressed.jpg"
] | [
"58694/stls/Gearwrench_10pc_Ratchet_Wrench_Organizer_-_Metric_Handle.stl"
] | CC-BY | https://www.printables.com/model/58694 | data_0043.tar |
425069 | Gecko Hook Hanger with screw / nail hole | <p><a href="https://www.etsy.com/uk/Saxonite/listing/1429009144/fp-45-liberator-replica-scale-model?utm_source=Copy&utm_medium=ListingManager&utm_campaign=Share&utm_term=so.lmsm&share_time=1679335477117">etsy.me/3n6BXUo</a></p><p><a href="https://www.etsy.com/uk/Saxonite/listing/1428998304/replica-colt-... | [
"hook",
"hanging",
"screw",
"hangar",
"nail",
"thingiverse",
"headphonehook",
"wallhook",
"hole",
"coathook",
"towelhook",
"hooks",
"gecko",
"doorhanger",
"clotheshanger",
"coathanger",
"doorhook"
] | Household > Home Decor | [
"425069/images/image_1_compressed.jpg"
] | [
"425069/stls/geckko_short_tail_with_hole.stl"
] | CC-BY | https://www.printables.com/model/425069 | data_0043.tar |
221357 | Geeetech Mizar S filament guide | <p>This Geeetech Mizar S filament guide prevents wear on your runout sensor walls. It fits directly into the sensor mount hole without any need for glue or hardware. </p><p>I printed it at .2 with a 10% infill. No supports needed.</p><p>Update: added a horseshoe version.</p> | [] | 3D Printers > Accessories | [
"221357/images/image_1_compressed.jpg",
"221357/images/image_2_compressed.jpg",
"221357/images/image_3_compressed.jpg",
"221357/images/image_4_compressed.jpg"
] | [
"221357/stls/Filament guide for Geeetech Mizar S Round.stl",
"221357/stls/Filament guide for Geeetech Mizar S.stl"
] | CC-BY | https://www.printables.com/model/221357 | data_0043.tar |
131448 | Gen-Z valentines expression of love | <p>A fun print for valentines day :)</p> | [
"gift",
"love",
"valentine",
"valentinesday",
"valentinesdaygifts",
"iloveyou",
"sendnudes"
] | Art & Design > Other Art & Designs | [
"131448/images/image_1_compressed.jpg",
"131448/images/image_2_compressed.jpg",
"131448/images/image_3_compressed.jpg"
] | [
"131448/stls/NudeLove_! S.stl",
"131448/stls/NudeLove_Base.stl",
"131448/stls/NudeLove_E N.stl",
"131448/stls/NudeLove_I S.stl",
"131448/stls/NudeLove_L E.stl",
"131448/stls/NudeLove_O D.stl",
"131448/stls/NudeLove_O N.stl",
"131448/stls/NudeLove_U E.stl",
"131448/stls/NudeLove_V U.stl",
"131448/s... | CC-BY | https://www.printables.com/model/131448 | data_0043.tar |
312246 | Generative Design Shelf Bracket | <p>I used Fusion 360 generative design to create these 21 generations. </p><p>See how it was designed and download 3 other sets of generations here <a href="https://piledltd.co.uk/generative-design-shelf-bracket-tutorial/">https://piledltd.co.uk/generative-design-shelf-bracket-tutorial/</a> </p><p>I have incl... | [
"shelf",
"wall",
"organic",
"wallmount",
"bracket",
"element",
"tree",
"wallmounted",
"generativedesign",
"topologyoptimized",
"branch",
"shelfbracket",
"shelfmount",
"organicmodeling",
"organicshape",
"shelfsupport",
"topology",
"topologyoptimization",
"bionic",
"growth",
"g... | Household > Other House Equipment | [
"312246/images/image_1_compressed.jpg",
"312246/images/image_2_compressed.jpg",
"312246/images/image_3_compressed.jpg",
"312246/images/image_4_compressed.jpg",
"312246/images/image_5_compressed.jpg",
"312246/images/image_6_compressed.jpg"
] | [
"312246/stls/Outcome 1.stl",
"312246/stls/Outcome 10.stl",
"312246/stls/Outcome 11.stl",
"312246/stls/Outcome 12.stl",
"312246/stls/Outcome 13.stl",
"312246/stls/Outcome 14.stl",
"312246/stls/Outcome 15.stl",
"312246/stls/Outcome 16.stl",
"312246/stls/Outcome 17.stl",
"312246/stls/Outcome 18.stl",... | CC-BY | https://www.printables.com/model/312246 | data_0043.tar |
180061 | Generative Organic Bookends | <p>I really like the way Generative design looks, so I made these bookends in Fusion 360. I designed these for a height of 5.212 inches or 132.4 mm. That info might be helpful if the scale on the .stl files is messed up like mine was.</p><p>FYI, the original 3rd generative bookend might be difficult to print. I printed... | [
"generativedesign",
"topologyoptimized",
"bookend",
"thingiverse",
"topologyoptimization",
"generativeart"
] | Household > Office | [
"180061/images/image_1_compressed.jpg",
"180061/images/image_10_compressed.jpg",
"180061/images/image_11_compressed.jpg",
"180061/images/image_12_compressed.jpg",
"180061/images/image_13_compressed.jpg",
"180061/images/image_2_compressed.jpg",
"180061/images/image_3_compressed.jpg",
"180061/images/ima... | [
"180061/stls/1st_Generative_Bookend.stl",
"180061/stls/1st_Generative_Bookend_Dagger_Foot.stl",
"180061/stls/2nd_Generative_Bookend.stl",
"180061/stls/3rd_Generative_Bookend.stl",
"180061/stls/3rd_Generative_Bookend_Filled_Base.stl"
] | CC-BY | https://www.printables.com/model/180061 | data_0043.tar |
114411 | Generic Medieval Knight Cavalry |
<p>Generic Medieval Knight Cavalry with Lances for 1:72 wargaming</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 5</p></div><strong>Rafts:</strong></p>
<p>Doesn't Matter</p>
<p><p class="detail-setting ... | [
"knight",
"tabletop",
"medieval",
"wargaming",
"historical",
"25mm",
"thingiverse",
"tabletopgaming",
"20mm",
"cavalry"
] | Toys & Games > Other Toys & Games | [
"114411/images/image_1_compressed.jpg",
"114411/images/image_2_compressed.jpg",
"114411/images/image_3_compressed.jpg",
"114411/images/image_4_compressed.jpg"
] | [
"114411/stls/G_KNI_CH_Lance_A1.stl",
"114411/stls/G_KNI_CH_Lance_A2.stl",
"114411/stls/G_KNI_CH_Lance_S1.stl",
"114411/stls/G_KNI_CH_Lance_S2.stl"
] | CC-BY | https://www.printables.com/model/114411 | data_0043.tar |
941293 | Generic PC 3.5" Bay Cover | [] | 3D Printers > Accessories | [
"941293/images/image_1_compressed.jpg"
] | [
"941293/stls/CHRIS 3.5.stl"
] | CC0 | https://www.printables.com/model/941293 | data_0043.tar | |
192710 | Generic Scissors Handle | <p>The handle is optimized to stick to the flat build plate. If you are left handed just mirror it to make it more comfortable because the inner perimeter filet is not symmetric.</p> | [
"handle",
"scissors"
] | Hobby & Makers > Tools | [
"192710/images/image_1_compressed.jpg"
] | [
"192710/stls/scissors-handle.stl"
] | CC0 | https://www.printables.com/model/192710 | data_0043.tar |
1142526 | Gengar Scultpure | <p>Add a touch of ghostly mischief to your collection with this unique statue of Gengar showcasing its playful yet eerie personality! This design features the fan-favorite Ghost Pokémon balancing effortlessly on its extended tongue, perfectly capturing its mischievous nature and agile prowess. With dynamic movement, sh... | [
"ghost",
"pokemon",
"art",
"monster",
"sculpture",
"gengar",
"spooky",
"purple"
] | Art & Design > Sculptures | [
"1142526/images/image_1_compressed.jpg",
"1142526/images/image_2_compressed.jpg",
"1142526/images/image_3_compressed.jpg"
] | [
"1142526/stls/Gengar.stl"
] | GPL3.0 | https://www.printables.com/model/1142526 | data_0043.tar |
73230 | Genie | <p>The ever-impressive, the long-contained, the often imitated, but never duplicated...<br/>
Genie of the Lamp!”</p>
<p>If this proves popular, I will work on some other characters in the Franchise,as well as accessories and variants of this Character if requested. So Please post your makes, hit like, and provide feed... | [
"toy",
"lamp",
"mini",
"cartoon",
"toys",
"hero",
"disney",
"figure",
"minifig",
"miniature",
"forkids",
"easytoprint",
"magic",
"animated",
"disneyland",
"miniatures",
"thingiverse",
"easyprint",
"actionfigure",
"kidstoys",
"cartooncharacter",
"actionfigures",
"waltdisne... | Toys & Games > Action Figures & Statues | [
"73230/images/image_1_compressed.jpg",
"73230/images/image_10_compressed.jpg",
"73230/images/image_2_compressed.jpg",
"73230/images/image_3_compressed.jpg",
"73230/images/image_4_compressed.jpg",
"73230/images/image_5_compressed.jpg",
"73230/images/image_6_compressed.jpg",
"73230/images/image_7_compre... | [
"73230/stls/Genie_best_print_orientation.stl",
"73230/stls/PHENOMINAL_COSMIC_POWER..._itty_bitty_file_space.stl"
] | CC-BY | https://www.printables.com/model/73230 | data_0043.tar |
308184 | Geocaching container w PET-cork |
<p>??</p>
<p>Im sorry that there is no ThingiView on the models, so you cannot actually see the magnet and eyelet variants online, anyone know how to fix that?</p>
<p>I have made a couple of variants on the same theme; a watertight small geocaching contaier that closes with a PET-bottle cork from a soda bottle (Fant... | [
"geocache",
"geocaching",
"thingiverse",
"geocachingcontainer"
] | Sports & Outdoor > Outdoor Sports | [
"308184/images/image_1_compressed.jpg",
"308184/images/image_2_compressed.jpg",
"308184/images/image_3_compressed.jpg"
] | [
"308184/stls/Geocaching_container_small_v9.stl",
"308184/stls/Geocaching_container_small_v9_2magnets.stl",
"308184/stls/Geocaching_container_small_v9_endmagnet.stl",
"308184/stls/Geocaching_container_small_v9_eyelet.stl",
"308184/stls/Geocaching_container_v9.stl",
"308184/stls/Geocaching_container_v9_2mag... | CC-BY | https://www.printables.com/model/308184 | data_0043.tar |
837555 | Geometric Form Decoration | [
"decoration",
"wall",
"decor",
"art",
"geometric",
"homedecor",
"wallart",
"polygonal",
"geometricaldesign"
] | Household > Home Decor | [
"837555/images/image_1_compressed.jpg"
] | [
"837555/stls/Geometric Form.stl"
] | CC-BY | https://www.printables.com/model/837555 | data_0043.tar | |
306511 | Geometric Holiday Tree | <p>Scale it up, scale it down, put it on a bobble spring, print it in vase mode. Prints without support, external <strong>or</strong> internal.</p> | [] | Seasonal designs > Winter & Christmas & New Year's | [
"306511/images/image_1_compressed.jpg",
"306511/images/image_2_compressed.jpg"
] | [
"306511/stls/ChristmasTree.stl"
] | CC-BY | https://www.printables.com/model/306511 | data_0043.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.