model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
922786 | Gree AC Remote Holder (YAP1F7) | <p>I designed a simple holder for my AC remote, as I was unsure if the models available on Printables would fit. Therefore, I quickly created my own design. This holder is specifically designed to fit the YAP1F7 remote. Additionally, there is a designated spot on the back for a 20mm Tesa tape (I don't like drilling hol... | [
"remoteholder",
"ac",
"gree",
"tosot",
"kinghome"
] | Household > Other House Equipment | [
"922786/images/image_1_compressed.jpg",
"922786/images/image_2_compressed.jpg"
] | [
"922786/stls/Gree AC Remote Holder.stl"
] | CC-BY | https://www.printables.com/model/922786 | data_0043.tar |
1252523 | Green Dragon 2025 | <p>Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs!</p><p>Patrons have access to all my files in one place, a request board, as well as c... | [
"dragon"
] | Tabletop Miniatures > Characters & Monsters | [
"1252523/images/image_1_compressed.jpg",
"1252523/images/image_2_compressed.jpg",
"1252523/images/image_3_compressed.jpg",
"1252523/images/image_4_compressed.jpg"
] | [
"1252523/stls/Adult Green Dragon Body presupported.stl",
"1252523/stls/Adult Green Dragon Body.stl",
"1252523/stls/Adult Green Dragon Head presupported.stl",
"1252523/stls/Adult Green Dragon Head.stl",
"1252523/stls/Adult Green Dragon Left Wing presupported.stl",
"1252523/stls/Adult Green Dragon Left Wing... | CC-BY | https://www.printables.com/model/1252523 | data_0043.tar |
18673 | Green Lantern Ring - classic | <p>Green Lantern Rings<br/>
Inner diameter: 22.5 mm (0.885" according to google)<br/>
No supports needed (when printed logo down)</p>
<p>Design based on older photos from <a href="http://www.dccomics.com/blog/2011/05/07/free-comic-book-day-special-edition-green-lantern-the-essentials">http://www.dccomics.com/blog/201... | [
"cosplay",
"prop",
"ring",
"comic",
"greenlantern",
"thingiverse",
"dccomic",
"greenlanternring"
] | Costumes & Accessories > Props | [
"18673/images/image_1_compressed.jpg",
"18673/images/image_2_compressed.jpg",
"18673/images/image_3_compressed.jpg"
] | [
"18673/stls/gl_ring_female.stl",
"18673/stls/gl_ring_male.stl"
] | CC-BY | https://www.printables.com/model/18673 | data_0044.tar |
306188 | Grenade Bunny | <p>This is a Grenade Bunny based on the art work from Lucky Bunny</p><p><a href="https://www.trendhunter.com/trends/grenade-bunny">https://www.trendhunter.com/trends/grenade-bunny</a></p><p>There were vinyl models made, but very expensive.</p><p>I recommend using the orientation for the parts in the image. The pin and ... | [
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"306188/images/image_1_compressed.jpg",
"306188/images/image_10_compressed.jpg",
"306188/images/image_11_compressed.jpg",
"306188/images/image_2_compressed.jpg",
"306188/images/image_3_compressed.jpg",
"306188/images/image_4_compressed.jpg",
"306188/images/image_5_compressed.jpg",
"306188/images/image... | [
"306188/stls/fuze_head.stl",
"306188/stls/grenade body.stl",
"306188/stls/mouth_pin.stl",
"306188/stls/neck (1).stl",
"306188/stls/neck_1.stl",
"306188/stls/pull_pin.stl",
"306188/stls/split_pull_ring.stl",
"306188/stls/spoon_ears.stl"
] | CC-BY | https://www.printables.com/model/306188 | data_0044.tar |
1628540 | Grenadine - CO2 Powered Nerf Blaster | <p></p><figure class="image image-style-align-center"><img class="editor-image-resize" src="https://media.printables.com/media/prints/1628540/rich_content/f8a41200-443c-4f9c-b495-79b4aa05b6dd/guess-we-doin-nerf-now.jpg#%7B%22uuid%22%3A%22469c734d-3054-47ad-9ebd-e91dd7acecfd%22%2C%22w%22%3A1180%2C%22h%22%3A667%7D"></fig... | [
"darts",
"nerf",
"half",
"bolt",
"action",
"co2",
"length",
"worker",
"talon"
] | Sports & Outdoor > Other Sports | [
"1628540/images/image_1_compressed.jpg",
"1628540/images/image_2_compressed.jpg",
"1628540/images/image_3_compressed.jpg",
"1628540/images/image_4_compressed.jpg",
"1628540/images/image_5_compressed.jpg",
"1628540/images/image_6_compressed.jpg",
"1628540/images/image_7_compressed.jpg",
"1628540/images... | [
"1628540/stls/barrel nut.stl",
"1628540/stls/bolt carrier .stl",
"1628540/stls/bolt track.stl",
"1628540/stls/chamber.stl",
"1628540/stls/charging handle.stl",
"1628540/stls/fire control group plate.stl",
"1628540/stls/flat top.stl",
"1628540/stls/gas router front.stl",
"1628540/stls/gas router rear... | CC0 | https://www.printables.com/model/1628540 | data_0044.tar |
1028964 | greyhound dog | <p>greyhound dog-galgo</p> | [
"dog",
"greyhound",
"galgo",
"mydog"
] | Art & Design > Sculptures | [
"1028964/images/image_1_compressed.jpg"
] | [
"1028964/stls/galgo-greyhound dog.stl"
] | CC-BY | https://www.printables.com/model/1028964 | data_0044.tar |
576738 | Gridfinity - Engineer Pliers Bins | <p>Assortment of Gridfinity bins to store and organize Engineer pliers.</p><p>I created the bins to be used with this model: <a href="https://www.printables.com/model/543553-gridfinity-storage-box-by-pred-now-parametric">https://www.printables.com/model/543553-gridfinity-storage-box-by-pred-now-parametric </a></p>... | [
"pliers",
"toolholder",
"plier",
"engineer",
"pliersholder",
"gridfinity",
"plierholder"
] | Hobby & Makers > Organizers | [
"576738/images/image_1_compressed.jpg",
"576738/images/image_2_compressed.jpg",
"576738/images/image_3_compressed.jpg",
"576738/images/image_4_compressed.jpg",
"576738/images/image_5_compressed.jpg"
] | [
"576738/stls/Gridfinity - 2x4x3u - Engineer - 1 Plier.stl",
"576738/stls/Gridfinity - 3x4x3u - Engineer - 2 Pliers.stl",
"576738/stls/Gridfinity - 4x4x3u - Engineer - 3 Pliers.stl",
"576738/stls/Gridfinity - 5x4x3u - Engineer - 4 Pliers.stl"
] | CC-BY | https://www.printables.com/model/576738 | data_0044.tar |
448282 | Gridfinity - Hot Glue Stick Holder 11 mm | <h3>Gridfinity 11mm Hot Glue Gun Stick Holder</h3>
<p>simple 1x1 gridfinity holder for 11mm glue sticks (such as used by Ryobi_One Glue Gun).</p>
<h3>Fusion360</h3>
<p>Designed with Fusion 360, Fusion 360 file included for easier re-mixing.</p>
<h3>Check out my other models for more Gridfinity Stuff</h3>
<p><a href="ht... | [
"hot",
"gun",
"glue",
"gluestick",
"1x1",
"ryobi",
"thingiverse",
"gluestickholder",
"ryobione",
"11mm",
"gridfinity"
] | Household > Office | [
"448282/images/image_1_compressed.jpg",
"448282/images/image_2_compressed.jpg",
"448282/images/image_3_compressed.jpg",
"448282/images/image_4_compressed.jpg",
"448282/images/image_5_compressed.jpg"
] | [
"448282/stls/Gridfinity_11_mm_glue_stick.stl"
] | CC-BY | https://www.printables.com/model/448282 | data_0044.tar |
492370 | Gridfinity - Labeled Fastener Bin: Vase w/ base infill | <p>My goal is to replace all the mishmash of fastener bins with filament efficient and strong bins. This prints in just over an hour and with 34g of filament. It has 6 bins in a 1x4 footprint and fits standard labels.</p><p>I love the divided vase bins by <a href="/@cyron52">@cyron52</a>. I'm using cl... | [] | Hobby & Makers > Organizers | [
"492370/images/image_1_compressed.jpg",
"492370/images/image_2_compressed.jpg",
"492370/images/image_3_compressed.jpg"
] | [
"492370/stls/1x4x6-6x-labeled-bin-with-base-infill.stl"
] | CC-BY | https://www.printables.com/model/492370 | data_0044.tar |
496573 | Gridfinity - Leatherman Surge | <p>The tool rocks a little in the bin, but works good enough for me. Feel free to improve on the design, step file is provided.</p> | [
"leatherman",
"surge",
"gridfinity",
"surgeplus"
] | Hobby & Makers > Organizers | [
"496573/images/image_1_compressed.jpg",
"496573/images/image_2_compressed.jpg"
] | [
"496573/stls/surge.stl"
] | CC0 | https://www.printables.com/model/496573 | data_0044.tar |
593418 | Gridfinity - Mitutoyo 150mm Caliper Holder - 2x6x6U Stackable | Used bin but made the caliper cutout | [
"mitutoyo",
"gridfinity"
] | Hobby & Makers > Organizers | [
"593418/images/image_1_compressed.jpg"
] | [
"593418/stls/2x6x4U - Mitutoyo Caliper.stl"
] | CC-BY | https://www.printables.com/model/593418 | data_0044.tar |
987119 | Gridfinity - Stackable Elegoo Neptune 4 plus nozzle holder | <p>Fits 12 nozzles and has space to emboss the nozzle size. The nozzles should screw in nicely.<br> </p><p>If you want to emboss the plain one, I highly recommend making a single string. Example: “0.4|0.6|0.8|1.0”. It's way easier to position and scale.</p> | [
"elegoo",
"neptune4",
"elegooneptune4",
"elegooneptune4pro",
"neptune4plus",
"elegooneptune4plus"
] | Hobby & Makers > Organizers | [
"987119/images/image_1_compressed.jpg"
] | [
"987119/stls/Gridfinity_stackable neptune 4 plus nozzle holder_labeled.stl",
"987119/stls/Gridfinity_stackable neptune 4 plus nozzle holder_plain.stl"
] | CC-BY | https://www.printables.com/model/987119 | data_0044.tar |
370970 | Gridfinity 169 6mm Bit (3x3x2) | <p>Why print many drill bit holders when you can print one that potentially exceeds your needs?</p><p>13x13 bit grid on a 3x3x2 gridfinity bin will allow you to store 169 6mm bits with an 8mm cavity.</p><p><strong>DISCLAIMER: </strong>it may be printer configuration specific, but my print came out snug in some holes, f... | [
"organizer",
"bit",
"drill",
"screw",
"screwdriver",
"pressfit",
"friction",
"frictionfit",
"gridfinity"
] | Hobby & Makers > Organizers | [
"370970/images/image_1_compressed.jpg",
"370970/images/image_2_compressed.jpg",
"370970/images/image_3_compressed.jpg",
"370970/images/image_4_compressed.jpg",
"370970/images/image_5_compressed.jpg"
] | [
"370970/stls/Gridfinity 169 Bit 3x3x2.stl"
] | CC-BY | https://www.printables.com/model/370970 | data_0044.tar |
1197418 | Gridfinity 1x1 Apple TV Remote Holder | [
"apple",
"remote",
"remotecontrol",
"remoteholder",
"appletv",
"appletvremote",
"remotecontrolholder",
"gridfinity",
"gridfinityholder"
] | Household > Living Room | [
"1197418/images/image_1_compressed.jpg",
"1197418/images/image_2_compressed.jpg",
"1197418/images/image_3_compressed.jpg",
"1197418/images/image_4_compressed.jpg"
] | [
"1197418/stls/apple tv remote holder v3.stl"
] | CC0 | https://www.printables.com/model/1197418 | data_0044.tar | |
1054310 | Gridfinity 1x1 bin for small drillbits (up to 4mm) | <p>Just a small but useful bin.</p> | [
"bit",
"drill",
"m4",
"m3",
"drillbit",
"m1",
"m2",
"gridfinity"
] | Hobby & Makers > Organizers | [
"1054310/images/image_1_compressed.jpg"
] | [
"1054310/stls/Small (up to 4mm) Drillbit Holder.stl"
] | BSD | https://www.printables.com/model/1054310 | data_0044.tar |
316858 | Gridfinity 1x2 bin for Battery Tester | <p>Gridfinity 1x2 3u high bin to hold a BT-168D model Battery Tester upright.</p><p>Printed in PLA. 0.2mm Layer height. 15% Infill</p> | [
"battery",
"batterytester",
"gridfinity"
] | Hobby & Makers > Organizers | [
"316858/images/image_1_compressed.jpg",
"316858/images/image_2_compressed.jpg"
] | [
"316858/stls/Gridfinity 2x1 C Battery Tester Holder v3.stl"
] | CC-BY | https://www.printables.com/model/316858 | data_0044.tar |
468602 | Gridfinity 1x2 solder roll holder | <p>This solder roll holder for the gridfinity system by Zack Freedman (https://thangs.com/designer/ZackFreedman) only needs 1x2 gridfinity slots (and a tiny bit, the shaft is 44.5mm long) and is able to hold 2 rolls of 100g solder rolls, e.g. for a 1mm and a 0.5mm roll of solder. There is however a version for a ... | [
"solder",
"gridfinity"
] | Hobby & Makers > Organizers | [
"468602/images/image_1_compressed.jpg"
] | [
"468602/stls/shaft_13mm.stl",
"468602/stls/shaft_18mm_goodfit.stl",
"468602/stls/solder_roll_holder_dual.stl",
"468602/stls/solder_roll_holder_single.stl"
] | CC-BY | https://www.printables.com/model/468602 | data_0044.tar |
478190 | Gridfinity 1x3 LTT Screwdriver Bits (x48) Holder [Magnetic] | <p><i><strong>NOTE: </strong>This print is designed to be paused at Z = 9.5 mm using an M600 command so that six 60 x 10 x 3 mm bar magnets (~$6 on </i><a href="https://www.amazon.com/dp/B09QFWKLTS"><i>Amazon</i></a><i>) can be inserted before resuming the print.</i></p><p>Gridfinity-compatible screwdriver bits holder ... | [
"screwdriver",
"bits",
"linustechtips",
"ltt",
"gridfinity"
] | Hobby & Makers > Organizers | [
"478190/images/image_1_compressed.jpg",
"478190/images/image_2_compressed.jpg"
] | [
"478190/stls/Gridfinity 1x3 LTT Driver 48x Bits Holder.stl"
] | CC-BY | https://www.printables.com/model/478190 | data_0044.tar |
437872 | Gridfinity 1x4 scalpel holder | <p>Print the lid with supports. Glue in 6x2 mm magnets</p> | [
"gridfinity"
] | Household > Other House Equipment | [
"437872/images/image_1_compressed.jpg",
"437872/images/image_2_compressed.jpg",
"437872/images/image_3_compressed.jpg"
] | [
"437872/stls/scapel base.stl",
"437872/stls/scapel box lid.stl"
] | CC0 | https://www.printables.com/model/437872 | data_0044.tar |
1045286 | GridFinity 2x2 Mug Stand | <p>I wanted to use a loose GridFinity plate on my desktop, but also keep my mug for large pens and as a weight.</p> | [
"mugholder",
"mug",
"gridfinity",
"mugcoaster"
] | Household > Office | [
"1045286/images/image_1_compressed.jpg",
"1045286/images/image_2_compressed.jpg"
] | [
"1045286/stls/GridFinity Mug Stand.stl"
] | CC-BY | https://www.printables.com/model/1045286 | data_0044.tar |
1273950 | Gridfinity 2x3 Precision Screw Driver Organizer | <p>Uses gridfinity 42mm unit size, is 2x3 units big and 25.4mm high. Prints neatly in PLA</p> | [
"organizer",
"precision",
"screwdriver",
"screwdriverholder",
"precisionscrewdriver",
"gridfinity"
] | Hobby & Makers > Organizers | [
"1273950/images/image_1_compressed.jpg",
"1273950/images/image_2_compressed.jpg"
] | [
"1273950/stls/Körper1.stl"
] | CC-BY | https://www.printables.com/model/1273950 | data_0044.tar |
1106285 | gridfinity 2x5 holder for modula system | <p>Same as the <a href="https://www.printables.com/model/1086514-gridfinity-2x5-holder-for-modula-system">old original design</a> except 14mm less wide. </p><p>The gain is that you can place them snug together side by side, and hence can put overlapping gridfinity bins.</p><p>In order to handle a lot of weig... | [
"organizer",
"wall",
"holder",
"mount",
"board",
"modular",
"adapter",
"tray",
"peg",
"tools",
"biltema",
"interchangeable",
"removable",
"gridfinity",
"jula",
"modula"
] | Hobby & Makers > Organizers | [
"1106285/images/image_1_compressed.jpg",
"1106285/images/image_10_compressed.jpg",
"1106285/images/image_2_compressed.jpg",
"1106285/images/image_3_compressed.jpg",
"1106285/images/image_4_compressed.jpg",
"1106285/images/image_5_compressed.jpg",
"1106285/images/image_6_compressed.jpg",
"1106285/image... | [
"1106285/stls/module.gridfinity.2x5.modula.3x.holder.snug.stl"
] | CC-BY | https://www.printables.com/model/1106285 | data_0044.tar |
816780 | Gridfinity 3x3 Small Parts Working Project Tray | <p>A simple tray to hold your small parts for a project. Keeps things together better than individual gridfinity bins. Front and back are filleted for easy part removal. Tray slots are recessed down enough that the whole tray is still stackable. </p><p>3 small trays measure 38mm x 38mm </p><p>2 middle trays m... | [
"stackable",
"tray",
"gridfinity"
] | Hobby & Makers > Organizers | [
"816780/images/image_1_compressed.jpg"
] | [
"816780/stls/Working Parts Tray.stl"
] | CC-BY | https://www.printables.com/model/816780 | data_0044.tar |
461618 | Gridfinity 3x6 Dymo LetraTag Label Maker Holder (2 piece) | <p>This Gridfinity storage block is designed to hold a Dymo LetraTag label maker and up to 6 extra label tapes. It is designed to fit into the top drawer of an IKEA ALEX drawer unit while fully loaded.</p><p>Based on and compatible with Zack Freedman's Gridfinity system, used under the terms of the MIT license.</p><p><... | [
"labelmaker",
"letratag",
"dymo",
"gridfinity"
] | Hobby & Makers > Organizers | [
"461618/images/image_1_compressed.jpg",
"461618/images/image_2_compressed.jpg",
"461618/images/image_3_compressed.jpg"
] | [
"461618/stls/Gridfinity 3x6 Dymo LetraTag Holder - Footer.stl",
"461618/stls/Gridfinity 3x6 Dymo LetraTag Holder - Header.stl"
] | BSD | https://www.printables.com/model/461618 | data_0044.tar |
309628 | Gridfinity 4x1 baseplate for Küpper board | <p><a href="https://cad.onshape.com/documents/a53c9cbdac4b57f3b4bb57a5/w/dc2706178bd0f7d37b853603/e/b360c1019551fd01cb352ca5?configuration=MaxPrintOverhang%3D1.0471975511965976%2Bradian%3BParts_Base%3Dtrue%3BParts_Base_Weighted%3Dtrue%3BParts_Unit%3Dtrue%3BParts_Unit_LED_Slot%3Dtrue%3BParts_Unit_NestingTop%3Dtrue%3BPar... | [
"kupper",
"gridfinity",
"gridfinitybaseplate"
] | Hobby & Makers > Organizers | [
"309628/images/image_1_compressed.jpg",
"309628/images/image_2_compressed.jpg"
] | [
"309628/stls/Gridfinity 4x1 Küpper board 37.5mm spacing.stl",
"309628/stls/Gridfinity 4x1 Küpper board 45mm spacing.stl"
] | CC0 | https://www.printables.com/model/309628 | data_0044.tar |
1134570 | Gridfinity 4x2 Breadboard holder with extras | <p>My version of a breadboard holder for the amazing gridfinity system, as I wanted to use gridfinity to organise my whole electronics prototyping space. </p><p>This bin has space for a 830-hole breadboard (JUST fits..), and a range of bits in a storage trough alongside. I've added 4x M3 mounting holes (threaded i... | [
"electronics",
"breadboardholder",
"gridfinity",
"gridfinitybin"
] | Hobby & Makers > Electronics | [
"1134570/images/image_1_compressed.jpg",
"1134570/images/image_2_compressed.jpg"
] | [
"1134570/stls/4x2_Gridfinity_breadboard830_plus_trough_25mm_m3_mounts_cutouts_and_holes.stl"
] | BSD | https://www.printables.com/model/1134570 | data_0044.tar |
468204 | Gridfinity 5 Inch Sanding Disc Holder | <p>Remix of @MiguelCamba_365047 Gridfinity sandpaper pads holder. All I did was make the hole 127mm (5") and trim it up. Basically just removed some of the sides that were made too thin by opening the hole up more (but you can pretend there's some fancy design reason, like being able to better view the amount of pads y... | [
"holder",
"sandpaper",
"pads",
"gridfinity"
] | Household > Outdoor & Garden | [
"468204/images/image_1_compressed.jpg",
"468204/images/image_2_compressed.jpg",
"468204/images/image_3_compressed.jpg"
] | [
"468204/stls/Sandpaper-127-tray.stl"
] | CC-BY | https://www.printables.com/model/468204 | data_0044.tar |
1101710 | Gridfinity 5x3 for 14 pencils | <p>This <strong>Gridfinity 5x3 pencil bin</strong> is perfect for organizing up to <strong>14 pencils</strong> or other similarly shaped items. Designed with a <strong>stackability lip</strong>, it seamlessly integrates with other Gridfinity-compatible modules, ensuring your workspace remains tidy and modular.</p><p>Ke... | [
"pencil",
"pencils",
"pencilholder",
"pencilbox",
"gridfinity",
"gridfinitybin"
] | Hobby & Makers > Organizers | [
"1101710/images/image_1_compressed.jpg",
"1101710/images/image_2_compressed.jpg"
] | [
"1101710/stls/Gridfinity bin 3x5 pencils.stl",
"1101710/stls/Gridfinity bin 5x3 pencils.stl"
] | CC-BY | https://www.printables.com/model/1101710 | data_0044.tar |
879816 | Gridfinity AA Battery Holder | <p>1x1 Gridfinity block to hold 5x AA batteries</p><p>Designed using standard Gridfinity geometry</p> | [
"batteryholder",
"gridfinity"
] | Hobby & Makers > Organizers | [
"879816/images/image_1_compressed.jpg",
"879816/images/image_2_compressed.jpg",
"879816/images/image_3_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/879816 | data_0044.tar |
330119 | Gridfinity AAA Battery Storage | <p>Originally i started off with the openscad file provided by briancmoses however in this current iteration little of the original code remains.</p><p>The main improvement was to support scaling in either direction and not just the Y-axis.</p><p>currently, positioning has to be done manually but I plan to update the o... | [
"aaa",
"battery",
"aaabattery",
"aaabatteryholder",
"batteries",
"aaabatterystorage",
"gridfinity"
] | Hobby & Makers > Organizers | [
"330119/images/image_1_compressed.jpg"
] | [
"330119/stls/gridfinity_battery_aaa_remix.stl"
] | CC-BY | https://www.printables.com/model/330119 | data_0044.tar |
378789 | Gridfinity abrasive disk dremel organizer | <p>#gridfinity</p><p>This model is another part of my gridfinity dremel caddy collection and fits a selection of abrasive discs commonly used for sanding and de-burring parts with a dremel. While I utilize the disks more for removing the sharp edges of aluminum extrusion, I mainly made this file with how well the gridf... | [
"gridfinity"
] | Hobby & Makers > Organizers | [
"378789/images/image_1_compressed.jpg",
"378789/images/image_2_compressed.jpg"
] | [
"378789/stls/gridfinity 2x1 dremel disk holder.stl"
] | CC-BY | https://www.printables.com/model/378789 | data_0044.tar |
1006030 | Gridfinity AirPods Pro 1x1 | <p>It looks great in dual color!</p><h3><strong>Print instructions</strong></h3><p>These tips can maybe help</p><ul><li><strong>Speed on first layer</strong>: 50% (or less) (To ensure good bed adhesion and perfect fit)</li><li><strong>Infill</strong>: 15% Lightning </li><li><strong>Perimeters</strong>: 2</li><li><... | [
"desk",
"apple",
"organization",
"airpods",
"airpodspro",
"gridfinity"
] | Household > Office | [
"1006030/images/image_1_compressed.jpg"
] | [
"1006030/stls/Gridfinity1x1AirpodsPro.stl"
] | CC-BY | https://www.printables.com/model/1006030 | data_0044.tar |
398960 | Gridfinity Bambu Lab 3D Printing Adhesive | <p>Source: https://www.tinkercad.com/things/95bQrG3bw7g?sharecode=BVYv3HplHKrQr1hTLQYhj8TywvyuB53P8iodIpCI9TA</p> | [
"adhesive",
"gridfinity",
"bambulab"
] | 3D Printers > Accessories | [
"398960/images/image_1_compressed.jpg",
"398960/images/image_2_compressed.jpg",
"398960/images/image_3_compressed.jpg"
] | [
"398960/stls/Gridfinity v1.stl"
] | CC-BY | https://www.printables.com/model/398960 | data_0044.tar |
419576 | Gridfinity base for 1" on center pegboard | <p>This is a fully parametric remix of the Gridfinity Magnet Light Baseplate by RIP_Plo-Koon (https://www.printables.com/model/250550).<br>I added a parametric "back panel with pegboard hooks" for 1/4" thick, 1" on center hole pegboard.<br>It seems to work best with a an odd integer for 'PB_Length' (number of hol... | [
"pegboard",
"gridfinity"
] | Hobby & Makers > Organizers | [
"419576/images/image_1_compressed.jpg"
] | [
"419576/stls/1x2.stl",
"419576/stls/1x3.stl",
"419576/stls/1x4.stl",
"419576/stls/1x5.stl",
"419576/stls/1x6.stl",
"419576/stls/1x7.stl",
"419576/stls/1x8.stl",
"419576/stls/2x2.stl",
"419576/stls/2x3.stl",
"419576/stls/2x4.stl",
"419576/stls/2x5.stl",
"419576/stls/2x6.stl",
"419576/stls/2x7... | CC-BY | https://www.printables.com/model/419576 | data_0044.tar |
1011883 | Gridfinity Bin for Wiha 3801 Stubby Screwdriver | <p>This is a 2x1x3 Gridfinity bin for the Wiha 3801 stubby screwdriver. I believe this will also work with the older 380 model, but I have not tested this. It will not fit the newer 3802 stubby, nor will it fit other model stubbies (281, etc).</p> | [
"wiha",
"wihaholder",
"gridfinity",
"gridfinityholder"
] | Hobby & Makers > Organizers | [
"1011883/images/image_1_compressed.jpg"
] | [
"1011883/stls/wiha-stubby-screwdriver-gridfinity.stl"
] | CC-BY | https://www.printables.com/model/1011883 | data_0044.tar |
977126 | Gridfinity bin template for Fusion 360 | <p>This is my personal template for making Gridfinity bins in Fusion 360.</p><p>No addons or scripts are required. The entire generation is done with the built-in parametric timeline.</p><p>It uses no-glue push-fit magnets for the base. See <a href="https://www.printables.com/model/759434-gridfinity-removable-push-fit-... | [
"gridfinity"
] | Hobby & Makers > Organizers | [
"977126/images/image_1_compressed.jpg",
"977126/images/image_2_compressed.jpg",
"977126/images/image_3_compressed.jpg"
] | [
"977126/stls/Example bin v1.1.stl"
] | CC0 | https://www.printables.com/model/977126 | data_0044.tar |
1255783 | Gridfinity bin with hinged captive lid | <p>Gridfinity is supposed to let you easily see what you have, so “lids” aren't really part of its shtick. But sometimes, you need lids! Like parts you want to protect from drips or dust.</p><p>Lids that come off as a separate piece aren't great: you have to figure out what to do with it, and it can get los... | [
"hinge",
"gridfinity",
"gridfinitybin",
"gridfinitylid"
] | Hobby & Makers > Organizers | [
"1255783/images/image_1_compressed.jpg",
"1255783/images/image_2_compressed.jpg",
"1255783/images/image_3_compressed.jpg"
] | [
"1255783/stls/hinged-base-bin - bin4x2x6.stl",
"1255783/stls/hinged-base-bin - lid4x2x6.stl",
"1255783/stls/hinged-base-bin2x2x8.stl",
"1255783/stls/hinged-base-bin4x2x8.stl",
"1255783/stls/hinged-bin - bin2x2x4.stl",
"1255783/stls/hinged-bin - bin2x2x6.stl",
"1255783/stls/hinged-bin - bin3x2x4.stl",
... | CC-BY | https://www.printables.com/model/1255783 | data_0044.tar |
560590 | Gridfinity Bit Storage | <p>Gridfinity screwdriver bit storage. This fits in the left front corner of my Craftsman toolbox (see the cutout in the side). Gridfinity base squares are 42mm, otherwise used the Gridfinity Design Reference sheet. I found that the 41.5 x 41.5 didn't fit my base squares. For those who have issu... | [
"craftsman",
"toolboxorganizer",
"gridfinity"
] | Hobby & Makers > Organizers | [
"560590/images/image_1_compressed.jpg",
"560590/images/image_2_compressed.jpg"
] | [
"560590/stls/1x3x3gu_bit_storage.stl"
] | CC0 | https://www.printables.com/model/560590 | data_0044.tar |
290780 | gridfinity box for unruly wires | <p>This wire storage box is optimized for effort required to put the wires in the box. Just jam them in there and they will stay. Less attention is payed to effort required to retrieve a wire of the right color.</p> | [
"jumperwire",
"gridfinity"
] | Hobby & Makers > Organizers | [
"290780/images/image_1_compressed.jpg"
] | [
"290780/stls/Gridfinity-wirebox-1x6.stl"
] | CC-BY | https://www.printables.com/model/290780 | data_0044.tar |
952036 | Gridfinity Box Ruler | <p>Sometimes when you are making custom Gridfinity bins or tool holders you want to know how high to make a container to hold what you need without all the faff of measuring and then having to do additional sums so as to match the unit heights to match the specifications. This is a simple ruler that can be used to meas... | [
"ruler",
"gridfinity",
"gridfinitybin",
"gridfinityholder"
] | Hobby & Makers > Organizers | [
"952036/images/image_1_compressed.jpg",
"952036/images/image_2_compressed.jpg",
"952036/images/image_3_compressed.jpg"
] | [
"952036/stls/Gridfinity Ruler.stl"
] | CC-BY | https://www.printables.com/model/952036 | data_0044.tar |
591335 | Gridfinity Cable Router | <p>This is a 1x1x3U Gridfinity block that allows you to route cable through your Gridfinity storage solution.</p><p>Each cable router block is made up of two parts that snap together using the same 6x2 sized magnets that are used for the bottoms of Gridfinity bins. This model uses hexagonal holes which allow to pressur... | [
"gridfinity"
] | Hobby & Makers > Organizers | [
"591335/images/image_1_compressed.jpg",
"591335/images/image_2_compressed.jpg",
"591335/images/image_3_compressed.jpg",
"591335/images/image_4_compressed.jpg"
] | [
"591335/stls/gridfinity cable router - bottom.stl",
"591335/stls/gridfinity cable router - top.stl"
] | CC-BY | https://www.printables.com/model/591335 | data_0044.tar |
978169 | gridfinity cable winder holder | <p>a gridfinity module for Marco Bresson's open source cable organiser/winder (small) Holds 4 spools, holds them standing even when not full <a href="https://www.printables.com/model/601730-parametric-stackable-cable-organizer-winder-one-wa">https://www.printables.com/model/601730-parametric-stackable-cable-organizer-w... | [
"spool",
"cable",
"winder",
"gridfinity"
] | Hobby & Makers > Organizers | [
"978169/images/image_1_compressed.jpg",
"978169/images/image_2_compressed.jpg"
] | [
"978169/stls/cable spool holder - Classic bin 2x3x4 stacking scooped magnetic.stl",
"978169/stls/cable spool holderr.stl"
] | CC0 | https://www.printables.com/model/978169 | data_0044.tar |
1406784 | Gridfinity Card Holder | <p>This 2×1 Gridfinity Cardholder stores up to 18 credit card-sized cards.This 2×1 Gridfinity Cardholder stores up to 18 credit card-sized cards.</p> | [
"organizer",
"creditcard",
"cardholder",
"compact",
"gridfinity",
"gridfinitybin",
"gridfinityholder"
] | Hobby & Makers > Organizers | [
"1406784/images/image_1_compressed.jpg"
] | [
"1406784/stls/gridfinity_cardholder_2x1x4 v1.stl"
] | CC0 | https://www.printables.com/model/1406784 | data_0044.tar |
241400 | Gridfinity case for scalpels | <p>This is a <a href="https://www.amazon.de/gp/product/B08L3N12CJ">scalpel box</a> for Zack's Gridfinity system based on <br>https://www.printables.com/de/model/226535-gridfinity-adapters</p><p>Gridfinity is the ultimate organizer for your whole workshop! Zack originally posted all the Gridfinity accessories at <a... | [
"scalpel",
"scalpelstorage",
"gridfinity"
] | Hobby & Makers > Organizers | [
"241400/images/image_1_compressed.jpg"
] | [
"241400/stls/Skalpellkasten Gridfinity v2.stl"
] | CC0 | https://www.printables.com/model/241400 | data_0044.tar |
1042711 | Gridfinity Channellock 430 10" Pump Pliers | <p>Exported in 2 parts for smaller printers, the internal pegs are optionals, but if you want to print them scale them down a bit so they fit. there is no fit tolerance on them. </p> | [
"gridfinity",
"channellock"
] | Hobby & Makers > Organizers | [
"1042711/images/image_1_compressed.jpg",
"1042711/images/image_2_compressed.jpg"
] | [
"1042711/stls/GridfinityChannellock430.stl"
] | GPL3.0 | https://www.printables.com/model/1042711 | data_0044.tar |
601452 | Gridfinity debur tool holder | Added the holder for the case and removed the knife slot | [
"deburring",
"deburringtool",
"gridfinity"
] | Hobby & Makers > Tools | [
"601452/images/image_1_compressed.jpg"
] | [
"601452/stls/gridfinity-debur-tool-holder.stl"
] | CC-BY | https://www.printables.com/model/601452 | data_0044.tar |
456785 | Gridfinity Deburing tool holder | <p>Gridfinity 1x1x5 box with slots for a deburing tool and 3 additional tool tips.</p><p>I made this model for my teng tools deburing tool (diamerter of 19mm) but could be easily adjusted to fit your own deburing tool size. The tool tip holes are 3.5mm in diameter.</p><p> </p><h3><strong>Print Settings</strong></h... | [
"deburring",
"deburrtool",
"deburringtool",
"gridfinity"
] | 3D Printers > Accessories | [
"456785/images/image_1_compressed.jpg"
] | [
"456785/stls/Deburing Tool.stl"
] | CC-BY | https://www.printables.com/model/456785 | data_0044.tar |
378117 | Gridfinity Desk Tray | <p>A Desk Tray Looks like “Grovemade desk tray”</p><p>It's a 5x3 Gridfinity base grid. I used this plains bins https://www.printables.com/fr/model/184201-gridfinity-plain-bins/files</p><p>You can print it and paint it. </p> | [
"gridfinity",
"gridfinitybaseplate",
"gridfinitybase"
] | Hobby & Makers > Organizers | [
"378117/images/image_1_compressed.jpg",
"378117/images/image_2_compressed.jpg",
"378117/images/image_3_compressed.jpg"
] | [
"378117/stls/GroovemadeGridfinity.stl"
] | CC-BY | https://www.printables.com/model/378117 | data_0044.tar |
462351 | Gridfinity Drawer Sharpie Holder | <p>This is a sharpie organizer for drawers. Design to be on the top of the stack. Two model general 2x4 and compact 1x4.</p>
<p>Editable version available on Thangs.com
<a href="https://thangs.com/designer/MyWay2Build/3d-model/Gridfinity%20drawer%20Sharpie%20Holder-839842?manualModelView=true&source=mymodels">http... | [
"thingiverse"
] | Household > Other House Equipment | [
"462351/images/image_1_compressed.jpg"
] | [
"462351/stls/GF_General_Sharpie_holder.stl",
"462351/stls/GF_Shapie_Holder_compact.stl"
] | CC-BY | https://www.printables.com/model/462351 | data_0044.tar |
378765 | gridfinity dremel polish and buffing bits | <p>#gridfinity</p><p>This model is part of my dremel caddy collection. This organizes everything that's commonly associated with buffing/ polishing work pieces with a dremel. I usually try to avoid anything larger then 1x1 gridfinity items but this had a non trivial increase of space allowing for an extra row of small ... | [] | Hobby & Makers > Organizers | [
"378765/images/image_1_compressed.jpg",
"378765/images/image_2_compressed.jpg"
] | [
"378765/stls/gridfinity dremel caddy large polishing wheels.stl"
] | CC-BY | https://www.printables.com/model/378765 | data_0044.tar |
1177045 | Gridfinity Drill Bit Storage | <p>A storage bin for loose drill bits. Curved surfaces make it easy to roll the bits up and out of the bin. In glorious 2x4 gridfinity format.</p> | [
"storage",
"workshop",
"drillbit",
"gridfinity"
] | Hobby & Makers > Organizers | [
"1177045/images/image_1_compressed.jpg"
] | [
"1177045/stls/Gridfinity 2x4 Drill Bit Storage.stl"
] | CC-BY | https://www.printables.com/model/1177045 | data_0044.tar |
1096627 | Gridfinity Dspiae Holder | <p>I love my Dspiae pen and reciprocating sanders. They were the perfect addition to my hobby bench. The problem…..between the tools themselves and all the accessories they were taking up a lot of space.</p><p>I saw the opportunity to utilize the Gidfinity system by Zack Freedman to organize the Dspiae hard... | [
"sander",
"gridfinity",
"accessoriesholder",
"dspiae"
] | Hobby & Makers > Organizers | [
"1096627/images/image_1_compressed.jpg",
"1096627/images/image_2_compressed.jpg"
] | [
"1096627/stls/Dspiae Gridfinity holder.stl"
] | CC-BY | https://www.printables.com/model/1096627 | data_0044.tar |
1019531 | Gridfinity Family Passports Holder | <p>A standard gridfinity holder for four passports. Each passport has its own slot and the slots are fanned out to make it easier to grab an individual passport. Includes standard magnet holes. Chamfering on the slots makes it easy to load the slots after a journey.</p><p>Print with PLA or PETG, 0.4mm nozzle.</p> | [
"officeorganization",
"gridfinity"
] | Hobby & Makers > Organizers | [
"1019531/images/image_1_compressed.jpg",
"1019531/images/image_2_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/1019531 | data_0044.tar |
241855 | Gridfinity Flashlight Modules | <p>Tested flashlights</p><figure class="table"><table><tbody><tr><td>D26x15</td><td>Emisar D4 / D4V2, Lumintop FW3A</td></tr><tr><td>D24,5x10</td><td>Convoy S2 / S2+</td></tr><tr><td>D27,5x15</td><td>Lumintop B01</td></tr><tr><td>D35,5x15</td><td>Emisar D4S</td></tr><tr><td>D53,5x15</td><td>Noctigon Meteor M43</td></tr... | [] | Hobby & Makers > Organizers | [
"241855/images/image_1_compressed.jpg"
] | [
"241855/stls/Gridfinity BLF Q8 v6.stl",
"241855/stls/Gridfinity Flashlight 53,5x15 v2.stl",
"241855/stls/Gridfinity Flashlight 53,5x15 v2_noholes.stl",
"241855/stls/Gridfinity Flashlight D24.5x10 v2_noholes.stl",
"241855/stls/Gridfinity Flashlight D24.5x10 v3.stl",
"241855/stls/Gridfinity Flashlight D26x1... | GPL3.0 | https://www.printables.com/model/241855 | data_0044.tar |
281771 | Gridfinity flux pen holder | [] | Hobby & Makers > Tools | [
"281771/images/image_1_compressed.jpg"
] | [
"281771/stls/flux-holder-1.stl"
] | CC0 | https://www.printables.com/model/281771 | data_0044.tar | |
243949 | Gridfinity Flux Syringe Holder | <p>Update: Added Fusion360 files</p><p>A holder for a flux syringe based on the gridfinity system created by Zack Freedman.</p><p>Designed to fit the syringe that can be found here. <a href="https://www.amazon.com/gp/product/B08KJRCYRH/ref=ppx_yo_dt_b_asin_title_o03_s02?ie=UTF8&psc=1">https://www.amazon.com/g... | [
"soldering",
"flux",
"gridfinity"
] | Hobby & Makers > Organizers | [
"243949/images/image_1_compressed.jpg"
] | [
"243949/stls/gridfinity_flux_syringe_holder.stl"
] | CC-BY | https://www.printables.com/model/243949 | data_0044.tar |
459120 | gridfinity for dremel collet | gridfinity holder for 12 dremel collet 1x1x3U stackable | Download free 3D printable STL models | [
"dremel",
"collet",
"gridfinity"
] | Hobby & Makers > Organizers | [
"459120/images/image_1_compressed.jpg"
] | [
"459120/stls/gridfinity-dremel-colet.stl"
] | CC-BY | https://www.printables.com/model/459120 | data_0044.tar |
1264747 | Gridfinity for USB Power adapters (Euro-plugs) | <h4>Gridfinty blocks for Euro <a href="https://upload.wikimedia.org/wikipedia/commons/6/6a/Europlug-scheme.svg">power plugs</a></h4><p> </p><p>This design is based on the <a href="https://github.com/kennetek/gridfinity-rebuilt-openscad">gridfinty rebuilt library</a></p><p>The code to generate the blocks can be fou... | [
"usb",
"usbholder",
"gridfinity"
] | Hobby & Makers > Organizers | [
"1264747/images/image_1_compressed.jpg",
"1264747/images/image_2_compressed.jpg",
"1264747/images/image_3_compressed.jpg"
] | [
"1264747/stls/gridfinity_plug_1x.stl",
"1264747/stls/gridfinity_plug_2x.stl",
"1264747/stls/gridfinity_plug_3x.stl",
"1264747/stls/gridfinity_plug_4x.stl"
] | CC-BY | https://www.printables.com/model/1264747 | data_0044.tar |
355112 | Gridfinity glue stick (Bambu Lab) | Gridfinity 1x1 for a glue stick up to 27 mm (sized for the Bambu Lab glue stick for build plate) | Download free 3D printable STL models | [] | 3D Printers > Accessories | [
"355112/images/image_1_compressed.jpg"
] | [
"355112/stls/Gridfinity glue stick.stl"
] | CC-BY | https://www.printables.com/model/355112 | data_0044.tar |
1000883 | Gridfinity Grids - Stacked for Printing - with supports | [
"gridfinity"
] | Hobby & Makers > Organizers | [
"1000883/images/image_1_compressed.jpg"
] | [
"1000883/stls/gridfinity-5x5x12-stack-v4 v1 v2.stl"
] | BSD | https://www.printables.com/model/1000883 | data_0044.tar | |
1351816 | Gridfinity GT2 Belt Tension Meter Holder (RC2) | <p>A 3x3 Gridfinity holder for the GT2 Belt Tension Meter (RC2) by PF Makes / Diyshift</p><p>Holds both the belt tension meter and the calibration holder/piano wire</p><p> </p><p>The actual tool can be found here:</p><p> https://github.com/Diyshift/3D-Printer/tree/main/GT2%20Belt%20Tension%20Meter</p> | [
"belt",
"meter",
"tension",
"gt2",
"pf",
"github",
"rc2",
"3x3",
"gridfinity",
"makes",
"west3d",
"dremc",
"diyshift",
"pfmakes"
] | 3D Printers > Accessories | [
"1351816/images/image_1_compressed.jpg"
] | [
"1351816/stls/Gridfinty GT2 Belt Tension Meter (RC2).stl"
] | CC-BY | https://www.printables.com/model/1351816 | data_0044.tar |
902733 | Gridfinity Guitar Pick Holder | <p>Guitar pick holder that fits in Zack Freedman's Gridfinity system.</p><p>There where a couple models that did this but they weren't quite what I wanted so I jumped in FreeCAD and mocked this up real quick.</p><p>The pick slots are 2mm wide so they're big enough to hold all but the biggest picks and they're spaced ou... | [
"gridfinity"
] | Hobby & Makers > Organizers | [
"902733/images/image_1_compressed.jpg"
] | [
"902733/stls/GFPick-Part.stl"
] | CC-BY | https://www.printables.com/model/902733 | data_0044.tar |
1244686 | Gridfinity Harbor Freight 5 Piece Test Probe Pick Set | <p>I made this Gridfinity holder for the Harbor Freight 5-Piece Test Probe Pick Set.</p><p>https://www.harborfreight.com/test-probe-set-5-piece-61872.html</p> | [
"pick",
"harborfreight",
"gridfinity"
] | Hobby & Makers > Organizers | [
"1244686/images/image_1_compressed.jpg"
] | [
"1244686/stls/Harbor Freight 5 Piece Mini Pick Holder.stl"
] | CC0 | https://www.printables.com/model/1244686 | data_0044.tar |
1126102 | Gridfinity Harbor Freight Flush Cutter and Plier Holder 3x4x3 | <p>Printed in Gray Polylite PETG.</p><p>Based on Zack Freedman's Gridfinity organizational system: </p><figure class="media"><oembed url="https://youtu.be/ra_9zU-mnl8?si=zEkY9Nqeuh0Cs0tO"></oembed></figure> | [
"harborfreight",
"gridfinity",
"gridfinityholder"
] | Hobby & Makers > Organizers | [
"1126102/images/image_1_compressed.jpg"
] | [
"1126102/stls/Gridfinity bin tweezercutter.stl"
] | CC-BY | https://www.printables.com/model/1126102 | data_0044.tar |
989738 | Gridfinity Harbor Freight step drill holder with magnets | <p>This is a Gridfinity 3X2 Step Drill holder that holds 3 bits. This holder is designed to fit the Imperial Step Drills from Harbor Freight SKU's (91616, 69087, 60379). The base of this model has the standard magnet pattern on the base since I am using these in my tool box. </p><p>I have uploaded the Fusion files... | [
"harborfreight",
"gridfinity",
"stepdrill"
] | Hobby & Makers > Organizers | [
"989738/images/image_1_compressed.jpg",
"989738/images/image_2_compressed.jpg"
] | [
"989738/stls/Harbor Freight Step Drill.stl"
] | CC-BY | https://www.printables.com/model/989738 | data_0044.tar |
1141338 | Gridfinity holder for Harbor Freight (Pittsburgh) 3/8" swivel ratchet | [] | Hobby & Makers > Tools | [
"1141338/images/image_1_compressed.jpg",
"1141338/images/image_2_compressed.jpg"
] | [
"1141338/stls/harbor frieght 38 swivel ratchet.stl"
] | CC-BY | https://www.printables.com/model/1141338 | data_0044.tar | |
454942 | Gridfinity holder for Radius gauge set | <p>This is a gridfinity holder for the complete radius gauge set by @GerryPB.</p><p><a href="https://www.printables.com/model/15818-radius-gauge">0.5 to 7.0 mm</a> and <a href="https://www.thingiverse.com/thing:3539241">7.5 to 13 mm</a></p><p>I found that his case was not quite large enough for the whole collection and... | [
"radius",
"gridfinity"
] | Hobby & Makers > Tools | [
"454942/images/image_1_compressed.jpg",
"454942/images/image_2_compressed.jpg"
] | [
"454942/stls/1x2x4u Radius gauge holder.stl",
"454942/stls/Amazon Radius Gauge Holder.stl"
] | CC0 | https://www.printables.com/model/454942 | data_0044.tar |
238619 | Gridfinity holder for remii's filament cutter | <p>A Gridfinity holder for <a href="https://www.printables.com/model/153112-filament-cutter-spring-latch">remii's excellent filament cutter</a></p><p>Stores the filament cutter in a 1x1x1 Gridfinity block (non stackable when filament cutter is slotted in place). I recommend using magnets to hold the block in place.</p> | [
"gridfinity"
] | Hobby & Makers > Organizers | [
"238619/images/image_1_compressed.jpg",
"238619/images/image_2_compressed.jpg"
] | [
"238619/stls/Gridfinity holder for remii's filament cutter.stl"
] | CC0 | https://www.printables.com/model/238619 | data_0044.tar |
329151 | Gridfinity Holder for SS-02 Engineer Solder Sucker - 4 Cells | <p><strong>READ BEFORE YOU PRINT: </strong>No screw/magnet holes on this one. I added the step file so you should be easily able to add some yourself.</p><p>I liked <a href="https://www.printables.com/social/307800-daclasen">daclasen</a>'s design, but I didn't like that it stores the sucker compressed. This can damage ... | [
"soldersucker",
"gridfinity"
] | Hobby & Makers > Organizers | [
"329151/images/image_1_compressed.jpg"
] | [
"329151/stls/gridfinity-soldersucker.stl"
] | CC-BY | https://www.printables.com/model/329151 | data_0044.tar |
919660 | Gridfinity holders for Pittsburgh (Harbor Freight) 7pc Long Reach Ball Hex Socket Sets | <p>Holders for Harbor Freight's Pittsburgh Metric and SAE (Imperial) Metric Long Ball Hex Socket Sets.</p><p>These are based on @ICEngineering's model for the <a href="https://www.printables.com/model/835024-husky-7-piece-long-hex-driver-holder-metric-gridfi">Husky 7-pc Metric Long Ball Hex Socket Set</a>.</p><p>I rebu... | [
"parametric",
"ball",
"harbor",
"socket",
"hex",
"openscad",
"freight",
"long",
"pittsburgh",
"parameterized",
"gridfinity"
] | Hobby & Makers > Tools | [
"919660/images/image_1_compressed.jpg",
"919660/images/image_2_compressed.jpg",
"919660/images/image_3_compressed.jpg"
] | [
"919660/stls/long hex sockets-compact-imperial.stl",
"919660/stls/long hex sockets-compact-metric.stl"
] | CC-BY | https://www.printables.com/model/919660 | data_0044.tar |
452182 | Gridfinity Hultafors Talmeter | <p>I've designed this simple holder for the Hultafors Talmeter measuring tape that fits in the Gridfinity system. It's made for the 3 m version that I got, but probably fits others as well. I've made one version with text and one without. </p><p>The Talmeter is a great tool when measuring, especially internal dime... | [
"hultafors",
"gridfinity"
] | Hobby & Makers > Organizers | [
"452182/images/image_1_compressed.jpg",
"452182/images/image_2_compressed.jpg",
"452182/images/image_3_compressed.jpg"
] | [
"452182/stls/Gridfinity Hultafors Talmeter 3 m (text).stl",
"452182/stls/Gridfinity Hultafors Talmeter 3 m.stl"
] | CC-BY | https://www.printables.com/model/452182 | data_0044.tar |
542664 | Gridfinity KALIM File and Diamond File holder | <p>This is tray to hold my <a href="https://www.amazon.co.uk/gp/product/B085D89T1R/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1">KALIM files</a> in my draw using Gridfinity. I bought these Amazon. Might work for other models.</p><p>The trays are stackable and each holds six files, so two are required to hold the ... | [
"storage",
"organization",
"gridfinity"
] | Hobby & Makers > Organizers | [
"542664/images/image_1_compressed.jpg"
] | [
"542664/stls/Files.stl"
] | CC-BY | https://www.printables.com/model/542664 | data_0044.tar |
468208 | Gridfinity Lip Balm/Chap Stick Holder 4x | A holder for up to 4 lip balm/chap sticks that works with Gridfinity | Download free 3D printable STL models | [
"chapstick",
"chapstickholder",
"lipbalm",
"gridfinity"
] | Household > Other House Equipment | [
"468208/images/image_1_compressed.jpg"
] | [
"468208/stls/Gridfinity 4x Lip Balm Fixed.stl"
] | CC0 | https://www.printables.com/model/468208 | data_0044.tar |
1093647 | Gridfinity LR44 Battery Holder - Lipless | <p>Quick remix of Squish's Gridfinity LR44 battery holder with no lip and chamfered magnet holes for easier printing.</p><p>Easy print. No supports.</p> | [
"battery",
"batteryholder",
"coincell",
"coincellholder",
"gridfinity",
"coincellbattery",
"gridfinityholder"
] | Hobby & Makers > Organizers | [
"1093647/images/image_1_compressed.jpg"
] | [
"1093647/stls/LR44 Gridfinity Cube - Lipless.stl"
] | CC0 | https://www.printables.com/model/1093647 | data_0044.tar |
825282 | Gridfinity MK4 Tool Holder | <p>It holds the 6 hex keys, 2 wrenches, and tube of lubricant that came with the MK4.</p> | [
"gridfinity"
] | 3D Printers > Accessories | [
"825282/images/image_1_compressed.jpg",
"825282/images/image_2_compressed.jpg",
"825282/images/image_3_compressed.jpg",
"825282/images/image_4_compressed.jpg",
"825282/images/image_5_compressed.jpg"
] | [
"825282/stls/MK4 accessories gridfinity v1.stl"
] | CC0 | https://www.printables.com/model/825282 | data_0044.tar |
480109 | Gridfinity ODBII | <p>A 2x1 gridfinity container for a vehicle diagnostic OBDII Bluetooth interface.</p><p>Freecad file available in the downloads section if you want to modify it</p> | [
"obd2",
"obdii",
"gridfinity"
] | Hobby & Makers > Organizers | [
"480109/images/image_1_compressed.jpg",
"480109/images/image_2_compressed.jpg"
] | [
"480109/stls/gridfinity_ODBII.stl"
] | CC-BY | https://www.printables.com/model/480109 | data_0044.tar |
336185 | Gridfinity Parametric Box w/ Dividers, Labels, AND stepped holes (Fusion 360 file) | <p>This is a fully parametric divider box for Amazing Gridfinity system by Void Star labs. I know there are a bunch of other ones out there but this one is mine =)<br><br>(plus there wasn't one with bridged magnet holes)</p><p>Parametric Options:</p><ul><li>Width</li><li>Depth</li><li>Height</li><li>Wall thickness</li>... | [
"bridge"
] | Hobby & Makers > Organizers | [
"336185/images/image_1_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/336185 | data_0044.tar |
494308 | Gridfinity Parkside crimping tool 3x6 | <p>3x6 Gridfinity holder for the Parkside crimping tool. Tool fits almost perfectly with a little bit of room. </p><p>Model was to big for my printer so i had to split it in two parts.</p> | [
"parkside",
"parksideholder",
"crimpingtool",
"gridfinity",
"crimpingtoolholder",
"gridfinityholder",
"parksidecrimpingpliers",
"crimpingpliers"
] | Hobby & Makers > Organizers | [
"494308/images/image_1_compressed.jpg",
"494308/images/image_2_compressed.jpg"
] | [
"494308/stls/gridfinity_parkside_cramping_plier_3x6.stl"
] | CC-BY | https://www.printables.com/model/494308 | data_0044.tar |
1411384 | Gridfinity partition | <p>Modular partition wall for Gridfinity</p><p>Print only the walls instead of an entire box to save material and printing time.</p><p>Compatible with other Gridfinity products. It does not have holes for magnets. It needs no support.</p><p>I look forward to your feedback and suggestions for improvement.</p> | [
"gridfinity"
] | Hobby & Makers > Organizers | [
"1411384/images/image_1_compressed.jpg"
] | [
"1411384/stls/Partition 1x1.stl",
"1411384/stls/Partition 1x2.stl",
"1411384/stls/Partition 1x3.stl",
"1411384/stls/Partition 1x4.stl",
"1411384/stls/Partition 1x5.stl",
"1411384/stls/Partition Corner 2x2.stl"
] | CC0 | https://www.printables.com/model/1411384 | data_0044.tar |
596639 | Gridfinity pen/pencil stand (no glue) | <p>A gridfinity compatible stand for pens, pencils, screwdrivers and other similarily shaped objects.</p><p>This remixed version removes the need for glue by making the connecting rod into a screw.</p><h5>Printing instructions</h5><p>Top & bottom part - no special configuration or supports needed. 10% infill seems ... | [
"holder",
"pencil",
"pen",
"stand",
"screw",
"glueless",
"gridfinity"
] | Household > Office | [
"596639/images/image_1_compressed.jpg",
"596639/images/image_2_compressed.jpg",
"596639/images/image_3_compressed.jpg",
"596639/images/image_4_compressed.jpg",
"596639/images/image_5_compressed.jpg"
] | [
"596639/stls/gridfinity pencil holder bottom.stl",
"596639/stls/gridfinity pencil holder rod.stl",
"596639/stls/gridfinity pencil holder top.stl"
] | CC-BY | https://www.printables.com/model/596639 | data_0044.tar |
1069535 | Gridfinity Pinecil 1x4 Holder | <p>Remix of Sweet1227's Gridfinity Pinecil iron holder made smaller (1x4 instead of 1x5) with heat set insert storage. No outer lip or solder pocket. Heat set insert copper tips rearranged and labeled. </p><p>Fits iron with short heating element. Heat set insert heating element with longest copper tip slightly ove... | [
"soldering",
"hobby",
"pinecil",
"gridfinity"
] | Hobby & Makers > Tools | [
"1069535/images/image_1_compressed.jpg",
"1069535/images/image_2_compressed.jpg",
"1069535/images/image_3_compressed.jpg",
"1069535/images/image_4_compressed.jpg"
] | [
"1069535/stls/PinecilIronStorage.stl"
] | CC-BY | https://www.printables.com/model/1069535 | data_0044.tar |
1200053 | Gridfinity Poop Bin for Flashforge AD5X | <p>Magnetic Gridfinity base for mounting with magnets on Flashforge AD5X or any other the steel frame. Great for mounting near the poop shoot to catch that flying debris or for any other Gridfinity container.</p><p>The back of the base uses either 3mm (same size as Gridfinity box) or 10mm magnets. If you do not have th... | [
"poop",
"pursa",
"flashforge",
"voron",
"gridfinity",
"poopchute",
"gridfinitybase",
"coreone",
"ad5x"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1200053/images/image_1_compressed.jpg",
"1200053/images/image_2_compressed.jpg",
"1200053/images/image_3_compressed.jpg"
] | [
"1200053/stls/Gridfinity Large Poop AD5X 140mm.stl",
"1200053/stls/GridfinityPoopCatcherBox_FF_AD5X.stl",
"1200053/stls/GridfinityPoopCatcherMount_FF_AD5X.stl"
] | CC0 | https://www.printables.com/model/1200053 | data_0044.tar |
406225 | Gridfinity Proxxon Collets | Simple holder for Proxxon collets and chuck based on templates by Zack Freedman. | Download free 3D printable STL models | [
"gridfinity"
] | Hobby & Makers > Tools | [
"406225/images/image_1_compressed.jpg"
] | [
"406225/stls/Proxxon collets.stl"
] | CC-BY | https://www.printables.com/model/406225 | data_0044.tar |
1415330 | Gridfinity prusa core one tool holer | [] | 3D Printers > Prusa Parts & Upgrades | [
"1415330/images/image_1_compressed.jpg"
] | [
"1415330/stls/body_4.stl"
] | CC0 | https://www.printables.com/model/1415330 | data_0044.tar | |
390391 | Gridfinity Raspberry Pi stand | <p>Gridfinity stand for a Raspberry Pi board</p><p><strong>You can support me by:</strong></p><ul><li><a href="https://kit.co/ilanKush/gridfinity-raspberry-pi-stand">buying it with my affiliate links</a></li><li><a href="https://www.buymeacoffee.com/ilankushnir">buying me a coffee</a> :)</li></ul><p><strong>Credits</st... | [
"raspberry",
"pi",
"raspberrypi",
"raspberrypi4",
"gridfinity"
] | Hobby & Makers > Organizers | [
"390391/images/image_1_compressed.jpg"
] | [
"390391/stls/v5 - Raspberry PI stand.stl"
] | CC0 | https://www.printables.com/model/390391 | data_0044.tar |
382144 | Gridfinity Replacement Filament Cutter Holder | <p>1x1 Gridfinity Bambu Lab Replacement Filament Cutter. There is room to place three (3) rows of three (3) cutters (x9). The model is stackable.</p><figure class="image"><img src="https://media.printables.com/media/prints/382144/rich_content/537c5e24-6b00-472e-8ab7-22663a04315f/cutters.png#%7B%22uuid%22%3A... | [
"bambulabx1",
"bambulabp1p"
] | 3D Printers > Accessories | [
"382144/images/image_1_compressed.jpg"
] | [
"382144/stls/Replacement Filament Cutter Holder.stl"
] | CC-BY | https://www.printables.com/model/382144 | data_0044.tar |
571715 | Gridfinity router bit tray | <p>Futher options will be added later. </p> | [
"router",
"routerbits",
"gridfinity",
"gridfinitybin",
"gridfinityholder"
] | Hobby & Makers > Organizers | [
"571715/images/image_1_compressed.jpg",
"571715/images/image_2_compressed.jpg"
] | [
"571715/stls/Router bit holder 5x.stl",
"571715/stls/Router bit tray 4x.stl",
"571715/stls/Router bit tray 7x.stl"
] | CC-BY | https://www.printables.com/model/571715 | data_0044.tar |
450691 | Gridfinity Rulers and Scissors Holder | <p>This is a simple holder for rulers and/or scissors. It is similar to a lot of other ruler holders, but I needed a wider slot to accommodate a pair of scissors. I printed 2 blocks and spaced them a bit apart and they hold everything in place perfectly.</p><p>Gridfinity is a project by <a href="https://thangs.com/desi... | [
"organizer",
"storage",
"1x1",
"scissors",
"rulers",
"gridfinity"
] | Hobby & Makers > Organizers | [
"450691/images/image_1_compressed.jpg",
"450691/images/image_2_compressed.jpg"
] | [
"450691/stls/Gridfinity - Rulers and Scissors holder.stl"
] | CC-BY | https://www.printables.com/model/450691 | data_0044.tar |
538492 | Gridfinity Ruthex 7X Soldering Tip Holder | <p><strong>Bin Dimensions:</strong><br>X: 1 Unit<br>Y: 2 Units<br>Z: 3 Units</p><p> </p><p><strong>Print Settings:</strong><br>Layer Height: 0.2mm<br>Top Layers: 4<br>Bottom Layers: 2<br>Enabled Ironing to make the font easy to read.</p><p> </p><p><strong>Note:</strong></p><p>Version in picture is only 2 unit... | [
"ruthex",
"gridfinity"
] | Hobby & Makers > Organizers | [
"538492/images/image_1_compressed.jpg"
] | [
"538492/stls/ruthex_solder_tip_holder.stl"
] | GPL2.0 | https://www.printables.com/model/538492 | data_0044.tar |
399742 | Gridfinity Samsung S3 Frontier Charger Stand v1 | <p>PETG</p><p>Printed with 0.6mm nozzle </p><p>0.44mm layer height</p> | [
"samsung",
"gadgets",
"charger",
"smartwatch",
"frontier",
"gridfinity"
] | Gadgets > Portable Devices | [
"399742/images/image_1_compressed.jpg",
"399742/images/image_2_compressed.jpg",
"399742/images/image_3_compressed.jpg"
] | [
"399742/stls/samsung-watch-frontier-s3-charger-stand v1.stl"
] | CC-BY | https://www.printables.com/model/399742 | data_0044.tar |
256574 | Gridfinity Samsung T5 Holder - 6 Drives | <p>For all you Blackmagic camera people out there (you know who you are). I present, the holy grail. If you're anything like me, you have an unreasonable number of these little Samsung SSD's floating around to fuel your little BMPCC 4K/6K/48K and it's time to clean up!</p><p> </p><p>Stuff 6 Samsung T5 ... | [
"gridfinity"
] | Hobby & Makers > Organizers | [
"256574/images/image_1_compressed.jpg",
"256574/images/image_2_compressed.jpg"
] | [
"256574/stls/Samsung T5 x 6 in Gridfinity 1x3.stl"
] | CC0 | https://www.printables.com/model/256574 | data_0044.tar |
436022 | Gridfinity Sandisk SSD Holder + Storage | <p>Remix of the SSD Holder from @giostealth, but with only one place for the SSD and one bigger part for storage.</p><p> </p><p>Printed with PLA at 0,16mm, but 0,2 will work just fine.</p><p> </p><p>note: newer models of the SanDisk SSDs have bigger dimensions, so you may need to adjust it.</p> | [
"storage",
"sandisk",
"gridfinity"
] | 3D Printers > Accessories | [
"436022/images/image_1_compressed.jpg",
"436022/images/image_2_compressed.jpg",
"436022/images/image_3_compressed.jpg"
] | [
"436022/stls/SSD+Storage.stl"
] | GPL2.0 | https://www.printables.com/model/436022 | data_0044.tar |
822492 | Gridfinity Sewing Bobbin Holder 3x5x4 (60 bobbins) | <p>This is a bobbin holder inspired by @Tdub5PrintNPl_470602 stackable bobbin holder (https://www.printables.com/model/367842-stackable-bobbin-holder) but built from scratch for gridfinity. It takes up 3x5x4 and fits 60 bobbins</p> | [
"stackable",
"sewing",
"bobbin",
"bobbinholder",
"gridfinity"
] | Hobby & Makers > Organizers | [
"822492/images/image_1_compressed.jpg"
] | [
"822492/stls/Grinfinity Bobbin holder 3x5x4.stl"
] | CC-BY | https://www.printables.com/model/822492 | data_0044.tar |
1100529 | Gridfinity Shadow Tray- Milwaukee Screw Driver 2401-20 | <p>My students and I are developing gridfinity shadow trays to organize the tools. Some fit better than others and most of them are setup for a 1in tool pocket depth. There will be more posted soon. </p><p>Here is a tray for the <strong>M12 Screw Driver 2401-20. </strong></p><p>There are two versions:&... | [
"screwdriver",
"milwaukee",
"m12",
"shadow",
"gridfinity"
] | Hobby & Makers > Tools | [
"1100529/images/image_1_compressed.jpg",
"1100529/images/image_2_compressed.jpg",
"1100529/images/image_3_compressed.jpg"
] | [
"1100529/stls/Screwdriver 2401-20- Heavy.stl",
"1100529/stls/Screwdriver 2401-20.stl"
] | CC0 | https://www.printables.com/model/1100529 | data_0044.tar |
460583 | Gridfinity Shaviv Holder | <p>Gridfinity tool holder for the Shaviv by Vargus deburring tool. This is made for the classic 29178 model.</p><p>I ran out of black during the print. Yellow to the rescue.</p> | [
"tool",
"holder",
"deburring",
"gridfinity"
] | Hobby & Makers > Organizers | [
"460583/images/image_1_compressed.jpg"
] | [
"460583/stls/Shaviv Deburr Tool Holder.stl"
] | CC-BY | https://www.printables.com/model/460583 | data_0044.tar |
475968 | Gridfinity Socket Driver Holder | <p>Gridfinity holder for a set of socket drivers.</p> | [] | Hobby & Makers > Organizers | [
"475968/images/image_1_compressed.jpg",
"475968/images/image_2_compressed.jpg"
] | [
"475968/stls/Gridfinity_1x3_21mm_Socket Driver.stl"
] | CC-BY | https://www.printables.com/model/475968 | data_0044.tar |
380191 | Gridfinity Solder Tip 12mm Magnet | <p>Gridfinity storage for generic solder tips with space for a 12x2 mm magnet on the bottom. For the 12mm magnet baseplate the fusion file is here: <a href="https://www.printables.com/model/380180-gridfinity-12x2-mm-magnet-light-baseplate">https://www.printables.com/model/380180-gridfinity-12x2-mm-magnet-light-baseplat... | [] | Hobby & Makers > Organizers | [
"380191/images/image_1_compressed.jpg"
] | [
"380191/stls/Solder Tip Holder.stl"
] | CC-BY | https://www.printables.com/model/380191 | data_0044.tar |
421641 | gridfinity soldering iron tip holder | <p>I printed this at 20% infill, with a 0.4mm nozzle and a 0.4mm layer height.</p><p>Ignore the base plate it is just for show.</p><p>No support required.</p> | [
"gridfinity"
] | Hobby & Makers > Electronics | [
"421641/images/image_1_compressed.jpg"
] | [
"421641/stls/soldering iron tip holder.stl"
] | CC0 | https://www.printables.com/model/421641 | data_0044.tar |
991726 | Gridfinity spacer for IKEA Alex | <p>Helps to keep the grid in place.<br><br>I use some tape to keep it from moving sideways.</p> | [
"ikea",
"spacer",
"alex",
"ikeaalex",
"gridfinity"
] | Hobby & Makers > Organizers | [
"991726/images/image_1_compressed.jpg"
] | [
"991726/stls/GridFinitity-Ikea-Alex-Skinny-BackSpacer-1.stl"
] | CC-BY | https://www.printables.com/model/991726 | data_0044.tar |
585190 | Gridfinity Stackable pick, tweezer, exacto tray | <p>I have a lot of picks, tweezers, files, and exacto knives. I wanted them to have a place but also have the most frequent ones easily accessible. Behold the 5 bay, stackable, pick, file, exacto, sharpie, tweezer storage.</p><ul><li>Stackable. 4 gridfinity units high. 3 of these can be stacked... | [
"tweezers",
"tweezerholder",
"picks",
"pickholder",
"gridfinity"
] | Hobby & Makers > Organizers | [
"585190/images/image_1_compressed.jpg"
] | [
"585190/stls/Gridfinity pick rack.stl"
] | CC0 | https://www.printables.com/model/585190 | data_0044.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.