model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
1172258 | Modular Crawler Course RC | <p>First attempt at building a modular course. made it free for anyone else looking to build one on a budget. Should work great for 24 and 18 scale crawlers.<br><br>I printed mine without supports and 0 infill to speed up the printing time and save on fillament. Rocks are sturdy enough and super lightweight. Enjoy!</p> | [
"rc",
"terrain",
"modular",
"crawler",
"rocks",
"stones",
"course",
"scx24",
"crawling",
"obstacles"
] | Hobby & Makers > RC & Robotics | [
"1172258/images/image_1_compressed.jpg"
] | [
"1172258/stls/rock 1.stl",
"1172258/stls/rock10.stl",
"1172258/stls/rock2.stl",
"1172258/stls/rock3.stl",
"1172258/stls/rock4.stl",
"1172258/stls/rock5.stl",
"1172258/stls/rock6.stl",
"1172258/stls/rock7.stl",
"1172258/stls/rock8.stl",
"1172258/stls/rock9.stl"
] | CC0 | https://www.printables.com/model/1172258 | data_0045.tar |
546765 | Modular fridge egg tray | <p>I was tired of my egg holder not exploiting the full length of the fridge's door tray, so I (well, mostly chatGPT) made this. It is extremely easy to customize: just modify the “rows” and “eggs_per_row” variables to fit your needs.<br><br>The openscad model can take some time to compile (30s-1min) if round_corners i... | [
"holder",
"modular",
"fridge",
"storage",
"eggs",
"openscad"
] | Household > Kitchen | [
"546765/images/image_1_compressed.jpg",
"546765/images/image_2_compressed.jpg",
"546765/images/image_3_compressed.jpg"
] | [
"546765/stls/modular_eggtray_8_eggs.stl"
] | CC-BY | https://www.printables.com/model/546765 | data_0045.tar |
261385 | Modular Hexagon Plant Trellis |
<p>Hexagon Plant Trellis. The connector nubs on my printer were a bit too tight. I heated the inside up with a soldering iron and pushed them onto the legs to resize them for a snug fit.</p>
<p>Mounted on the wall with two small nails on the inside of the hexagon legs</p>
<h3>Print Settings</h3>
<p><strong>Printer B... | [
"hexagon",
"plant",
"thingiverse",
"trellis"
] | Household > Other House Equipment | [
"261385/images/image_1_compressed.jpg",
"261385/images/image_2_compressed.jpg",
"261385/images/image_3_compressed.jpg"
] | [
"261385/stls/Hexagon_Connector_Nub.stl",
"261385/stls/Hexagon_Trellis.stl"
] | CC-BY | https://www.printables.com/model/261385 | data_0045.tar |
477250 | Modular Hexagon Spray Can Rack | <p>This was originally a wine rack made by FreakErn on thingiverse. Perfuzion then scaled it down 75% to fit spray cans. I took it a small step further and made the hexagons shorter so they would print faster and use less filament. </p><p><strong>Fits standard size spray cans </strong>- (e.g. Rustoleum, Krylon, Mo... | [
"hexagonal",
"hexagon",
"can",
"organizer",
"modular",
"rack",
"organization",
"spray",
"spraypaint",
"modularmount",
"spraycan",
"canholder",
"spraycanholder",
"modularmountsystem",
"hexagonsarebestagons",
"modularmounting"
] | Hobby & Makers > Organizers | [
"477250/images/image_1_compressed.jpg",
"477250/images/image_2_compressed.jpg",
"477250/images/image_3_compressed.jpg"
] | [
"477250/stls/100mm connector.stl",
"477250/stls/70mm connector (to wall).stl",
"477250/stls/80mm connector.stl",
"477250/stls/Spray Can Hex.stl"
] | CC-BY | https://www.printables.com/model/477250 | data_0045.tar |
64154 | Modular Hydroponic Tower Garden | <p>Announcement: 2025 remaster in the works — let me know in the comments if there is anything you would like to see in the new design.</p><p>Feb 2021 Update: Added a garden hose threads version of the cap.</p><p>Stole <a href="/archipelagourbanfarms/about">archipelagourbanfarms</a>'s <a href="https://www.thingiverse.c... | [
"plant",
"flower",
"garden",
"tower",
"hydroponics",
"plants",
"flowers",
"thingiverse",
"hydroponic",
"vegetable"
] | Household > Outdoor & Garden | [
"64154/images/image_1_compressed.jpg",
"64154/images/image_10_compressed.jpg",
"64154/images/image_11_compressed.jpg",
"64154/images/image_12_compressed.jpg",
"64154/images/image_13_compressed.jpg",
"64154/images/image_14_compressed.jpg",
"64154/images/image_15_compressed.jpg",
"64154/images/image_2_c... | [
"64154/stls/base.stl",
"64154/stls/offshoot-top.stl",
"64154/stls/offshoot.stl",
"64154/stls/segment-combined.stl",
"64154/stls/segment.stl",
"64154/stls/top-garden-hose-threads.stl",
"64154/stls/top-hose-thread.stl",
"64154/stls/top.stl"
] | CC-BY | https://www.printables.com/model/64154 | data_0045.tar |
101131 | Modular Knife Stand |
<p>Simple snap-together EDC tool organizer meant to sit flat in a drawer.</p>
Category: Organization
| [
"thingiverse"
] | Household > Office | [
"101131/images/image_1_compressed.jpg"
] | [
"101131/stls/Knife_Stand_v1.stl"
] | CC-BY | https://www.printables.com/model/101131 | data_0045.tar |
339301 | Modular Marker Organizer | <p>Use PETG filament. No supports. If necessary, giant honeycombs can be used to accommodate incredibly large bees.</p> | [
"organizer",
"modular",
"stackable",
"honeycomb",
"deskorganizer",
"stackablecontainer",
"copicmarkers",
"markerstand",
"tesslation"
] | Hobby & Makers > Organizers | [
"339301/images/image_1_compressed.jpg",
"339301/images/image_2_compressed.jpg",
"339301/images/image_3_compressed.jpg"
] | [
"339301/stls/marker_organizer v3.stl",
"339301/stls/marker_organizer v4.stl"
] | CC-BY | https://www.printables.com/model/339301 | data_0045.tar |
562338 | Modular pen and tool holders | <p>Our modular and connectable pen and tool holder for the laboratory and office - designed by our Design Technology Fellow Matías Hurtado Labarca as a part of the <a href="https://librehub.github.io/"><strong>LIBRE hub</strong></a> project</p><p>What's special about this model, given that there are already so many hol... | [
"organizer",
"office",
"holder",
"modular",
"laboratory"
] | Hobby & Makers > Organizers | [
"562338/images/image_1_compressed.jpg",
"562338/images/image_2_compressed.jpg",
"562338/images/image_3_compressed.jpg"
] | [
"562338/stls/Organiser - Low Holder - 2X.stl",
"562338/stls/Organiser - Low Holder - 4X.stl",
"562338/stls/Organiser - Tall Holder - 4X.stl"
] | CC-BY | https://www.printables.com/model/562338 | data_0045.tar |
248707 | Modular Small Parts Cabinet | <p>This is a remix with the following improvements:<br> </p><ul><li>Reduced print times</li><li>Reduced filament usage</li><li>Easier to print</li><li>More box options</li><li>Small tools drawers in the foot</li></ul><p>One drawback is that this unit is 6 compartments wide instead of having many many width options... | [] | Hobby & Makers > Organizers | [
"248707/images/image_1_compressed.jpg",
"248707/images/image_2_compressed.jpg",
"248707/images/image_3_compressed.jpg",
"248707/images/image_4_compressed.jpg",
"248707/images/image_5_compressed.jpg"
] | [
"248707/stls/box-2slot.stl",
"248707/stls/box-3slot.stl",
"248707/stls/box-4slot.stl",
"248707/stls/box-double.stl",
"248707/stls/box-quad.stl",
"248707/stls/box-triple.stl",
"248707/stls/box.stl",
"248707/stls/floor.stl",
"248707/stls/foot-drawer[a].stl",
"248707/stls/foot.stl",
"248707/stls/ha... | CC-BY | https://www.printables.com/model/248707 | data_0045.tar |
125994 | Modular Tool Rack for IKEA Platsa Enclosure | <p>This is a modular tool rack for IKEA Platsa enclosures.</p> | [
"enclosure",
"toolholder",
"platsa",
"3dprinterenclosure"
] | Hobby & Makers > Organizers | [
"125994/images/image_1_compressed.jpg",
"125994/images/image_2_compressed.jpg"
] | [
"125994/stls/assembly.stl",
"125994/stls/tool-rack.stl"
] | GPL3.0 | https://www.printables.com/model/125994 | data_0045.tar |
408770 | Modular watch holder (stand) | <p>I made this watch holder because i wanted to be able to easily ad more watches and I wanted to be able to slide them on because is more convenient than strapping them on the holder.</p>
<p>You can also easily add another middle or "additional" part and fit as many watched as you want or you can remove that part comp... | [
"holder",
"modular",
"watch",
"multipart",
"thingiverse",
"easyprint",
"wristwatch",
"watchholder"
] | Fashion > Other Fashion Accessories | [
"408770/images/image_1_compressed.jpg",
"408770/images/image_10_compressed.jpg",
"408770/images/image_2_compressed.jpg",
"408770/images/image_3_compressed.jpg",
"408770/images/image_4_compressed.jpg",
"408770/images/image_5_compressed.jpg",
"408770/images/image_6_compressed.jpg",
"408770/images/image_... | [
"408770/stls/WatchHolderAdditional.stl",
"408770/stls/WatchHolderPart1.stl",
"408770/stls/WatchHolderPart2.stl"
] | CC-BY | https://www.printables.com/model/408770 | data_0045.tar |
287777 | Mold for mosquito hotend sock with Voron logo | <p>https://www.thingiverse.com/thing:4879638</p><p>Hotend sock for the mosquito hotend, nice snug fit for making sure it won't fall off.<br>Sock goes all around the heaterblock and is suitable for using the magnum heatbreak.<br>The sock also slots into the 2 blind bottom holes next to the nozzle, securing it into place... | [
"hotend",
"engineering",
"silica",
"mosquito",
"slice",
"mold",
"sock",
"siliconemold",
"siliconesock",
"mosquitohotend",
"sliceengineering",
"magnum"
] | 3D Printers > Voron Parts & Upgrades | [
"287777/images/image_1_compressed.jpg",
"287777/images/image_2_compressed.jpg",
"287777/images/image_3_compressed.jpg",
"287777/images/image_4_compressed.jpg",
"287777/images/image_5_compressed.jpg",
"287777/images/image_6_compressed.jpg"
] | [
"287777/stls/Mold base.stl",
"287777/stls/Mold bottom stealthburner.stl",
"287777/stls/Mold bottom with larger flange and tighter nozzle fit.stl",
"287777/stls/Mold bottom with small flange.SLDPRT.stl",
"287777/stls/Mold core with larger flange and tighter nozzle fit.stl",
"287777/stls/Mold core.stl",
"... | CC0 | https://www.printables.com/model/287777 | data_0045.tar |
922859 | MOLLE 6" ChemLight Holder | <ul><li>Layer height 0.15mm.</li><li>Infill 20% </li><li>Perimeters: 3 </li><li>Print with brim<br><br>For the military grade ChemLights with the hexagonal shells.</li></ul> | [
"camping",
"molle",
"survival"
] | Sports & Outdoor > Outdoor Sports | [
"922859/images/image_1_compressed.jpg",
"922859/images/image_2_compressed.jpg"
] | [
"922859/stls/MOLLE_chemlight.stl"
] | GPL2.0 | https://www.printables.com/model/922859 | data_0045.tar |
433097 | Molle EDC clips | <p>These are belt clips for a certain type of EDC pouch with multiple molle straps on the back.</p><p>One clip braces around two directly adjacent straps (2 in / 5 cm), the other hooks into that tiny loop at the top which comes pre-equipped with a carabiner hook and then wraps under the buttoned vertical straps.</p><p>... | [
"bag",
"clip",
"edc",
"molle",
"nylon",
"pouch"
] | Household > Outdoor & Garden | [
"433097/images/image_1_compressed.jpg",
"433097/images/image_2_compressed.jpg",
"433097/images/image_3_compressed.jpg"
] | [
"433097/stls/Guertelclip High.stl",
"433097/stls/Guertelclip.stl"
] | CC-BY | https://www.printables.com/model/433097 | data_0045.tar |
153032 | Monitor headphone support | <p>A simple headphone support which can be mounted to the top of the monitor using double sided tape. The surface for mounting the double sided tape is 20mm x 20mm for the standard support and 20mm x 40mm for the XL version.</p><p>It might not work for really heavy headsets, I'm using it for a Jabra Evolve 65 and it ne... | [
"support",
"headphones",
"headset",
"monitor"
] | Household > Office | [
"153032/images/image_1_compressed.jpg",
"153032/images/image_2_compressed.jpg",
"153032/images/image_3_compressed.jpg"
] | [
"153032/stls/Headphone_Support v1.stl",
"153032/stls/Headphone_Support_XL v1.stl"
] | CC-BY | https://www.printables.com/model/153032 | data_0045.tar |
394961 | Monitor stand legs | <p>I was inspired by some monitor stand leg models. I modeled this model for the board I wanted to use. The hole for the board is 18mm x 200m.</p> | [] | Gadgets > Computers | [
"394961/images/image_1_compressed.jpg",
"394961/images/image_2_compressed.jpg"
] | [
"394961/stls/MonitorStandLegs II..stl",
"394961/stls/MonitorStandLegs.stl"
] | CC0 | https://www.printables.com/model/394961 | data_0045.tar |
989065 | Monitor support | <p>Support holding the monitor's weight if the monitor stand does not work correctly. The dimensions are 130x29x20mm. The dimensions can be altered in the slicer to suit your exact needs</p><p>Print instructions:</p><ul><li>No supports needed</li><li>Infill: honeycomb, 10-15% </li><li>Perimeters: 4</li><li>No top ... | [
"stand",
"support",
"monitor",
"monitorstand"
] | Household > Office | [
"989065/images/image_1_compressed.jpg",
"989065/images/image_2_compressed.jpg"
] | [
"989065/stls/monitor_stand.stl",
"989065/stls/monitor_stand_2pcs.stl"
] | CC0 | https://www.printables.com/model/989065 | data_0045.tar |
313897 | Monopoly Junior Car | [
"monopoly",
"monopolyjunior"
] | Toys & Games > Board Games | [
"313897/images/image_1_compressed.jpg",
"313897/images/image_2_compressed.jpg",
"313897/images/image_3_compressed.jpg"
] | [
"313897/stls/Monopoly Junior - Car.stl"
] | CC0 | https://www.printables.com/model/313897 | data_0045.tar | |
593823 | Monster Mouth Headphone Holder - Clampable: Logitech G933/G935/G633/G635 Remix | <p>I've been using this headphone clamp for a long time, it's awesome! I recently got a new G933 and realized how much the foam band had squished over time from resting on the original Monster headphone holder. I added an indentation so it will rest nicely while not squishing the padding on top of the head band. I also... | [
"hanger",
"headphones",
"headset",
"logitech",
"headphoneholder",
"thingiverse",
"headphonehanger"
] | Gadgets > Audio | [
"593823/images/image_1_compressed.jpg",
"593823/images/image_2_compressed.jpg"
] | [
"593823/stls/G933_Headphone_holder.stl",
"593823/stls/screw.stl"
] | CC-BY | https://www.printables.com/model/593823 | data_0045.tar |
1042607 | monstera leaf | [] | Seasonal designs > Autumn & Halloween | [
"1042607/images/image_1_compressed.jpg"
] | [
"1042607/stls/monstera_cookie_cutter.stl"
] | CC-BY | https://www.printables.com/model/1042607 | data_0045.tar | |
274732 | Monstera leaf support for plants | [
"support",
"garden",
"green",
"plants",
"net"
] | Household > Outdoor & Garden | [
"274732/images/image_1_compressed.jpg",
"274732/images/image_2_compressed.jpg",
"274732/images/image_3_compressed.jpg"
] | [
"274732/stls/MONSTERAsupportLEAF.stl",
"274732/stls/MONSTERAsupportSTICK.stl"
] | CC-BY | https://www.printables.com/model/274732 | data_0045.tar | |
347375 | Moon Lamp stand from Ikea Svallet lamp parts - more sturdy | <p>Remix of veritas' moon lamp Ikea Svallet base to make more sturdy as I managed to break a leg off the original whilst assembling.</p><p><a href="https://www.ikea.com/gb/en/p/svallet-work-lamp-dark-grey-white-70358492/">https://www.ikea.com/gb/en/p/svallet-work-lamp-dark-grey-white-70358492/</a></p><p>The lamp is cur... | [
"lamp",
"moon"
] | Household > Home Decor | [
"347375/images/image_1_compressed.jpg"
] | [
"347375/stls/moon stand.stl"
] | CC-BY | https://www.printables.com/model/347375 | data_0045.tar |
212437 | Moon Soap Tray | <h3>Moon Soap Tray</h3><ul><li>Designed in OnShape.</li><li>Printed without supports.</li><li>Can be used for dish sponges as well.</li><li>Designed for Soap Dish Contest.</li></ul> | [
"space",
"moon",
"tray",
"soap",
"sponge",
"earth",
"spongeholder",
"soaptray",
"lunar",
"dishsoap",
"dishsoaptray"
] | Household > Bathroom | [
"212437/images/image_1_compressed.jpg",
"212437/images/image_2_compressed.jpg"
] | [
"212437/stls/Moon Cup.stl",
"212437/stls/Moon Tray.stl"
] | CC0 | https://www.printables.com/model/212437 | data_0045.tar |
359847 | Moon vase with base | <p>Haven't printed yet, but the original design recommended 100% infill.</p> | [] | Household > Home Decor | [
"359847/images/image_1_compressed.jpg"
] | [
"359847/stls/Dazzling Fyyran-Blad.stl"
] | CC-BY | https://www.printables.com/model/359847 | data_0045.tar |
223946 | Moon wall lamp reusing Ikea Smila lamp |
<p>I've taken half of the moon lamp and combined it with a mount that fits over an old Ikea lamp fitting (Smila Blomma - a daisy lamp our kids have outgrown). Moon simply slides onto the old mount.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><s... | [
"thingiverse"
] | Household > Other House Equipment | [
"223946/images/image_1_compressed.jpg",
"223946/images/image_2_compressed.jpg",
"223946/images/image_3_compressed.jpg"
] | [
"223946/stls/Bedside_lamp.stl"
] | CC-BY | https://www.printables.com/model/223946 | data_0045.tar |
296310 | Moonlander adjustable tenting kit that folds flat | <p><i>This is largely inspired by </i><a href="https://www.thingiverse.com/thing:5028257"><i>https://www.thingiverse.com/thing:5028257</i></a><i> by </i><a href="https://www.thingiverse.com/kageiit"><i>kageii</i></a></p><figure class="image"><img src="https://media.printables.com/media/prints/296310/rich_content/a48ecb... | [
"keyboard",
"mechanicalkeyboard",
"moonlander"
] | Gadgets > Computers | [
"296310/images/image_1_compressed.jpg",
"296310/images/image_2_compressed.jpg",
"296310/images/image_3_compressed.jpg",
"296310/images/image_4_compressed.jpg",
"296310/images/image_5_compressed.jpg"
] | [
"296310/stls/Base.stl",
"296310/stls/bottom-bracket.stl",
"296310/stls/Mount.stl",
"296310/stls/Small Stand.stl",
"296310/stls/Stand.stl"
] | CC0 | https://www.printables.com/model/296310 | data_0045.tar |
332123 | Moose cookie cutter | <p>A moose cookie cutter. Not much to say about it. I used the very cute design from Wilko (thank you for sharing) and did a remix.</p> | [] | Household > Kitchen | [
"332123/images/image_1_compressed.jpg"
] | [
"332123/stls/cookiescuttermoose_2x1 v8.stl"
] | CC-BY | https://www.printables.com/model/332123 | data_0045.tar |
990686 | Moose Eyeglass Holder For Night Stand SCANNED | <p>My wife found this hand carved moose stand at a thrift store and she fell in love with it. I used it as a test subject for my new Creality Raptor 3D Scanner.</p> | [
"decoration",
"holder",
"animal",
"moose",
"decor",
"3dscan",
"glasses",
"glassesholder",
"nightstand",
"nature"
] | Art & Design > Sculptures | [
"990686/images/image_1_compressed.jpg",
"990686/images/image_2_compressed.jpg"
] | [
"990686/stls/Moose Eyeglass Stand SCANNED.stl"
] | CC0 | https://www.printables.com/model/990686 | data_0045.tar |
198913 | Moose Statue (3D Scan) | <p>This is the 3D scan of a Moose statue I bought at a yard sale one day.</p><p>The big one is the original and the smaller black one is the 3D scanned copy. </p><ul><li>I Recommend printing him sideways so the supports don't get stuck on the platform the moose stands on.</li><li>I used “KIRI engine” to sca... | [
"3d",
"moose",
"model",
"3dscan",
"platform",
"3dscanner",
"nature",
"antlers",
"copy",
"hooves",
"mooses",
"kiri"
] | Art & Design > Sculptures | [
"198913/images/image_1_compressed.jpg",
"198913/images/image_2_compressed.jpg",
"198913/images/image_3_compressed.jpg",
"198913/images/image_4_compressed.jpg"
] | [
"198913/stls/Moose(3DSCAN).stl"
] | CC0 | https://www.printables.com/model/198913 | data_0045.tar |
318334 | Moosehead Bridge | <p>This popular bridge head design works great when printed in ABS-like resin. I've been using one for our twice weekly games for over a year now. Loving it.</p> | [
"billiards",
"poolbillard",
"snooker",
"billiard",
"poolbilliard"
] | Sports & Outdoor > Indoor Sports | [
"318334/images/image_1_compressed.jpg",
"318334/images/image_2_compressed.jpg",
"318334/images/image_3_compressed.jpg"
] | [
"318334/stls/moose bridge - no supports.stl",
"318334/stls/moose bridge.stl"
] | CC0 | https://www.printables.com/model/318334 | data_0045.tar |
861979 | Morf Worm | <p>i suggest printing it with glow-in-the-dark filament </p> | [
"fidget",
"wow",
"new",
"gadget",
"cool",
"james",
"worm",
"satisfying",
"pepperoni",
"morf",
"2dot0"
] | Toys & Games > Other Toys & Games | [
"861979/images/image_1_compressed.jpg"
] | [
"861979/stls/Morf Worm 2.0.stl"
] | CC0 | https://www.printables.com/model/861979 | data_0045.tar |
1550518 | Morserino M32 Pocket Case for production components | <p>Use the FCStd files if you wish to change the models in FreeCAD, and use FreeCAD 1.1 or later.</p><p>Use the STEP files if you wish to change the models in some other CAD.</p><p>Use the STEP or STL files to print as-is.</p><p>The STEP files may need to be re-oriented for print; the STL files are correctly oriented f... | [
"hamradio",
"freecad",
"morse",
"morsecode",
"qrplabs",
"morserino",
"morserino32"
] | Gadgets > Other Gadgets | [
"1550518/images/image_1_compressed.jpg",
"1550518/images/image_2_compressed.jpg",
"1550518/images/image_3_compressed.jpg"
] | [
"1550518/stls/Case-Bottom.stl",
"1550518/stls/Case-Top-Original-Mount-Logo-m3.stl",
"1550518/stls/Case-Top-Original-Mount-Logo-original.stl",
"1550518/stls/Case-Top-Original-Mount-m3.stl",
"1550518/stls/Case-Top-Original-Mount-original.stl",
"1550518/stls/Case-Top-Plain-Logo-m3.stl",
"1550518/stls/Case-... | CC0 | https://www.printables.com/model/1550518 | data_0045.tar |
83660 | Mosaic Vase Collection | <p>I think I'm addicted to making vases. So many possibilities. Lol</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3</p></div><strong>Rafts:</strong></p>
<p>No</p>
<p><p class="detail-setting supports"><st... | [
"vase",
"decoration",
"mosaic",
"decor",
"art",
"vasemode",
"vases",
"spiralvase",
"flowervase",
"thingiverse",
"twistedvase",
"homedecor",
"decorative"
] | Art & Design > Sculptures | [
"83660/images/image_1_compressed.jpg",
"83660/images/image_10_compressed.jpg",
"83660/images/image_11_compressed.jpg",
"83660/images/image_12_compressed.jpg",
"83660/images/image_13_compressed.jpg",
"83660/images/image_2_compressed.jpg",
"83660/images/image_3_compressed.jpg",
"83660/images/image_4_com... | [
"83660/stls/Mos_Vase_1.stl",
"83660/stls/Mos_Vase_2 (1).stl",
"83660/stls/Mos_Vase_3.stl",
"83660/stls/Mos_Vase_4 (1).stl",
"83660/stls/Mos_Vase_5.stl",
"83660/stls/Mos_Vase_6 (1).stl"
] | CC-BY | https://www.printables.com/model/83660 | data_0045.tar |
205659 | Moskvy | <p>There's a hole in this Benchy.</p><p>PLA Pro<br>.2 Layer height<br>Supports required</p><p>If you like, like.</p><p>Peace</p> | [
"boat",
"benchy",
"peace",
"moskva",
"ukraine",
"russia"
] | Toys & Games > Vehicles | [
"205659/images/image_1_compressed.jpg"
] | [
"205659/stls/Moskvy.stl"
] | CC-BY | https://www.printables.com/model/205659 | data_0045.tar |
1172036 | Mosquito M4 Conversion V3, Stock Plate extension, and better threads! | <p>You will need a m3x40mm screw and a m3 (preferably lock) nut for and the similar spring to original (maybe longer) for the mag catch system, install like a real one. You will need two m3 nuts and two m3x12mm screws for the mag flare / trigger guard install. Extended stock plate needs 2 m3x12mm and two m3x20mm screws... | [
"bb",
"printable",
"mosquito",
"m4",
"airsoft",
"magazine",
"bbs",
"mag"
] | Sports & Outdoor > Other Sports | [
"1172036/images/image_1_compressed.jpg",
"1172036/images/image_2_compressed.jpg",
"1172036/images/image_3_compressed.jpg"
] | [
"1172036/stls/Battery_Stock_Plate_Stendo.stl",
"1172036/stls/Battery_Stock_Plate_Stendo_Thicc.stl",
"1172036/stls/Battery_Stock_Plate_Thicc.stl",
"1172036/stls/Battery_Stock_Ring_Thicc.stl",
"1172036/stls/M4_Hop-Up_Feed_Lip.stl",
"1172036/stls/M4_MagFlare.stl",
"1172036/stls/M4_Mag_Release_Arm.stl",
"... | GPL3.0 | https://www.printables.com/model/1172036 | data_0045.tar |
154201 | Most simple functional parametric USB organizer stand | <p>The most simple usb organizer, bc sometimes you just need a place to plug stuff in. No fancy edges, no logo, no bs. Pure function.</p><p>Prints usually in ~30 minutes (7pcs).</p><p>Additionally it's a nice stringing test with benefits ^^</p><p> </p><p>In the f3d file you will find parameters for number of piece... | [
"parametric",
"organizer",
"functional",
"fusion360",
"usb",
"simple"
] | Hobby & Makers > Organizers | [
"154201/images/image_1_compressed.jpg"
] | [
"154201/stls/usb-stand v3_21pcs.stl",
"154201/stls/usb-stand v3_5pcs.stl",
"154201/stls/usb-stand v3_7pcs.stl",
"154201/stls/usb-stand v3_9pcs.stl"
] | CC-BY | https://www.printables.com/model/154201 | data_0045.tar |
385634 | Motherday statue | <p>Statua per la festa della mamma, o qualsiasi altro momento per dedicare l'amore per un figlio.</p><p>Ho trovato il progetto su thingiverse, ma non sono riuscito a trovare la pagina o il nome esatto per poterlo inserire come remix o make.</p><p>Fatta con Anycubic kobra Neo</p><p>PLA Nero Anycubic.</p> | [
"statue",
"art",
"love",
"heart",
"mother",
"mothersday",
"mom"
] | Art & Design > Sculptures | [
"385634/images/image_1_compressed.jpg",
"385634/images/image_2_compressed.jpg",
"385634/images/image_3_compressed.jpg",
"385634/images/image_4_compressed.jpg"
] | [
"385634/stls/MD2_V03.stl"
] | CC-BY | https://www.printables.com/model/385634 | data_0045.tar |
1312220 | Motorcycle throttle holder | <p>I just added two small details to aid my use of the original part, which was great as it is but this makes it easier to use for me. <br><br>https://cad.onshape.com/documents/a56bed21a0b25eb8d808102c/w/5a7fb90a0490462fcaf26759/e/5130ff272292a95873c6ad32?renderMode=0&uiState=6838c49f21c5ca3c842e2684</p> | [] | Toys & Games > Vehicles | [
"1312220/images/image_1_compressed.jpg"
] | [
"1312220/stls/Throttle_CC.stl"
] | CC-BY | https://www.printables.com/model/1312220 | data_0045.tar |
575936 | Motorized Baby Bouncer | <div data-youtube-video=""><iframe class="editor-youtube" width="640" height="480" allowfullscreen="true" autoplay="false" disablekbcontrols="false" enableiframeapi="false" endtime="0" ivloadpolicy="0" loop="false" modestbranding="false" origin="" playlist="" rel="1" src="https://www.youtube-nocookie.com/embed/czn13K_z... | [
"motor",
"baby",
"cam",
"bouncer",
"bjorn"
] | Household > Other House Equipment | [
"575936/images/image_1_compressed.jpg",
"575936/images/image_2_compressed.jpg",
"575936/images/image_3_compressed.jpg",
"575936/images/image_4_compressed.jpg",
"575936/images/image_5_compressed.jpg",
"575936/images/image_6_compressed.jpg",
"575936/images/image_7_compressed.jpg",
"575936/images/image_8... | [
"575936/stls/Axle.stl",
"575936/stls/Cam.stl",
"575936/stls/Clamp Bottom.stl",
"575936/stls/Clamp Top.stl",
"575936/stls/Motor Bottom Plate.stl",
"575936/stls/Motor Housing.stl",
"575936/stls/Switch Panel.stl"
] | CC0 | https://www.printables.com/model/575936 | data_0045.tar |
1272546 | Motorola Edge 50 Neo - Case | <p>A TPU Case for the Motorola Edge 50 Neo with full camera lens protection.</p><p>Because of the camera bump, the model is divided into two parts which you have to glue together.</p><p>I tried a number of glues, this one worked very well on TPU:</p><figure class="image image_resized image-style-align-center" data-widt... | [
"case",
"tpu",
"phone",
"smartphone",
"motorola",
"motorolaedge50neo",
"edge50"
] | Gadgets > Portable Devices | [
"1272546/images/image_1_compressed.jpg",
"1272546/images/image_2_compressed.jpg",
"1272546/images/image_3_compressed.jpg"
] | [
"1272546/stls/edge50_neo_camera_bump.stl",
"1272546/stls/edge50_neo_case.stl",
"1272546/stls/edge50_neo_case_low_border.stl",
"1272546/stls/edge50_neo_glue_helper.stl"
] | CC-BY | https://www.printables.com/model/1272546 | data_0045.tar |
529517 | Mouldline scraper handle for GW stubby metal mouldline remover. | <p>Print this handle for your Games Workshop metal mold line remover tool to make it actually usable. No supports needed. <br><br>An M3 nut and M3x10 can be used to secure the metal piece to the 3D printed handle. <br><br>Stl file includes discs either end of the print to help it adhere to the bed. These can ... | [
"tool",
"handle",
"hobby",
"gamesworkshop",
"deburring",
"moldline"
] | Hobby & Makers > Tools | [
"529517/images/image_1_compressed.jpg",
"529517/images/image_2_compressed.jpg",
"529517/images/image_3_compressed.jpg"
] | [
"529517/stls/GW Mold Line Remover Tool handlev5.stl"
] | CC0 | https://www.printables.com/model/529517 | data_0045.tar |
1015829 | Mounjaro Injector Pen Refrigerator Holder / Wall Mount | <p>A practical wall-mount holder for Mounjaro (tirzepatide) injector pens / KwikPens. Attaches to the inside wall of your refrigerator to keep pens organized, easy to access, and out of the way — helping maximize fridge space.</p><p><strong>Features:</strong></p><ul><li><p>Designed for standard Mounjaro single-dose or ... | [
"organizer",
"holder",
"pen",
"refrigerator",
"medical",
"weight",
"injector",
"medication",
"loss",
"mounjaro",
"tirzepatide",
"semaglutide",
"glp1"
] | Healthcare > Home Medical Tools | [
"1015829/images/image_1_compressed.jpg",
"1015829/images/image_2_compressed.jpg"
] | [
"1015829/stls/Mounjaro Injector Pen Holder.stl"
] | CC0 | https://www.printables.com/model/1015829 | data_0045.tar |
1543459 | Mounjaro Kwikpen Case | <p>Compact case for storing one Kwikpen and four needles packages.</p><p>Holds together with six 6mm x 2mm magnets.</p> | [
"case",
"mercury",
"needles",
"mounjaro",
"kwikpen"
] | Healthcare > Home Medical Tools | [
"1543459/images/image_1_compressed.jpg",
"1543459/images/image_2_compressed.jpg"
] | [
"1543459/stls/kwickpencase.stl",
"1543459/stls/kwickpencase_upper.stl"
] | CC-BY | https://www.printables.com/model/1543459 | data_0045.tar |
376537 | Mount for 3x5wire WAGO connectors with mains power labels, holes for Voron DIN clip | <p>Redesign of a Wago mount (from Voron) with embossed labels for my RatRig V-Core-3. It has two countersunk holes 55mm apart for fixing it to Voron's really cool printable DIN clips. I have included the STEP and F3D files so you can modify the labels or adjust hole spacing yourself.</p><p>The two main STLs... | [
"clip",
"mount",
"din",
"wago",
"voron",
"ratrig",
"vcore3",
"ratrigvcore3"
] | Hobby & Makers > Electronics | [
"376537/images/image_1_compressed.jpg",
"376537/images/image_2_compressed.jpg",
"376537/images/image_3_compressed.jpg"
] | [
"376537/stls/DIN_Original_voron_reupload.stl",
"376537/stls/DIN_Tight_voron_reupload.stl",
"376537/stls/wago_3x5_generic_labels_DIN.stl",
"376537/stls/wago_3x5_mains_labels_DIN.stl"
] | CC0 | https://www.printables.com/model/376537 | data_0045.tar |
1315086 | Mount for digital sundial | <p>I printed the digital sundial at half scale with a Mars4U resin printer, but wanted needed a mount, found this one at Thingiverse. It's a good model, highly recommended.</p> | [
"mount",
"digital",
"sundial",
"digitalsundial"
] | Gadgets > Other Gadgets | [
"1315086/images/image_1_compressed.jpg"
] | [
"1315086/stls/Halterung.stl"
] | CC-BY | https://www.printables.com/model/1315086 | data_0045.tar |
496249 | Mount for Hammerhead Karoo 2 | <p>Adapter mount for bicycle computer head unit Hammerhead Karoo 2.</p><p>I printed mine in carbon fiber reinforced nylon. For different materials, the spring rate for the locking tap might be different.</p><p>The Fusion360 file is included if you need to revise the model.</p> | [
"mount",
"computer",
"adapter",
"road",
"bicycle",
"bike",
"mtb",
"hammerhead",
"karoo"
] | Sports & Outdoor > Outdoor Sports | [
"496249/images/image_1_compressed.jpg"
] | [
"496249/stls/Hammerhead Karoo 2 mount.stl"
] | CC0 | https://www.printables.com/model/496249 | data_0045.tar |
167311 | Mount for SKÅDIS pegboard on KALLAX | <p><strong>ENG:</strong><br>Spacers for hanging the SKÅDIS pegboard (36x56 cm) on the side of the KALLAX shelf.<br>There is no need to make any changes to the furniture, because the two side screws of the shelf are used to attach the spacers.</p><p><strong>ITA:</strong><br>Distanziatori per appendere il pannello portao... | [
"organizer",
"ikea",
"mount",
"pegboard",
"skadis",
"kallax"
] | Household > Home Decor | [
"167311/images/image_1_compressed.jpg",
"167311/images/image_2_compressed.jpg",
"167311/images/image_3_compressed.jpg"
] | [
"167311/stls/SKADIS-KALLAX_Spacer_Left.stl",
"167311/stls/SKADIS-KALLAX_Spacer_Right.stl"
] | GPL2.0 | https://www.printables.com/model/167311 | data_0045.tar |
146777 | Mountain Bike Chain Guide | <p>Are you tired of your bike chain always falling of the front sprocket? This is the perfect cheap improvement: 3D printable bike chain guide!</p><p>This design prevents the chain from bouncing laterally and keeping it aligns with the front sprocket.</p><p>I have added a SCAD file of the frame clamp so you can easily ... | [
"chain",
"customizable",
"mountainbike",
"chainguide"
] | Sports & Outdoor > Outdoor Sports | [
"146777/images/image_1_compressed.jpg",
"146777/images/image_2_compressed.jpg",
"146777/images/image_3_compressed.jpg",
"146777/images/image_4_compressed.jpg",
"146777/images/image_5_compressed.jpg",
"146777/images/image_6_compressed.jpg"
] | [
"146777/stls/Frame clamp_25mm.stl",
"146777/stls/Frame clamp_31mm.stl",
"146777/stls/Frame clamp_31mm_offset-L.stl",
"146777/stls/Frame clamp_31mm_offset-R.stl",
"146777/stls/Frame clamp_35mm.stl",
"146777/stls/Guide.stl",
"146777/stls/Intermidiate arm.stl"
] | CC-BY | https://www.printables.com/model/146777 | data_0045.tar |
846307 | mountains hexagon art | <p>Hey everyone, first of all, it would mean a lot to me if you could <strong>download</strong> my model. It truly inspires me to create more. I make these models because I find it enjoyable, and I want to give back to all of you. All my models are <strong>completely free</strong>, and feel <strong>free to use them as ... | [
"hexagon",
"wall",
"art",
"kids",
"2d",
"2dart",
"mountains",
"kidsart"
] | Art & Design > 2D Plates & Logos | [
"846307/images/image_1_compressed.jpg",
"846307/images/image_2_compressed.jpg"
] | [
"846307/stls/mountains.stl"
] | CC0 | https://www.printables.com/model/846307 | data_0045.tar |
365294 | Mounting Bracket for Scarlett solo 3rd gen | <p>Mounting Bracket for Scarlett solo 3rd gen with the microphone cable holder.<br> </p> | [
"solo",
"mountingbracket",
"underdesk",
"focusrite",
"focusritescarlett",
"scarlett"
] | Gadgets > Audio | [
"365294/images/image_1_compressed.jpg",
"365294/images/image_2_compressed.jpg",
"365294/images/image_3_compressed.jpg"
] | [
"365294/stls/left_and_right_side-Body.stl",
"365294/stls/left_side-Body.stl",
"365294/stls/right_side-Body.stl"
] | CC-BY | https://www.printables.com/model/365294 | data_0045.tar |
511917 | Mounting Grid for 0.1" Spaced PCBs | <p>Adafruit has the <a href="https://www.adafruit.com/product/5774#technical-details">Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs</a> and included a link to a KiCad python script to generate the same. But I don't have or know how to use KiCad but I do know how to use Fusion 360.</p><p>Using the description... | [
"adafruit",
"mountinggrid"
] | Hobby & Makers > Electronics | [
"511917/images/image_1_compressed.jpg",
"511917/images/image_2_compressed.jpg",
"511917/images/image_3_compressed.jpg"
] | [
"511917/stls/Mounting Grid 10 x 10.stl",
"511917/stls/Mounting Grid 2 x 10.stl",
"511917/stls/Mounting Grid 5 x 10.stl",
"511917/stls/Mounting Grid 5 x 5.stl",
"511917/stls/Mounting Grid.stl"
] | CC0 | https://www.printables.com/model/511917 | data_0045.tar |
875011 | Mountingbracket for Eufy security cam | <p>The mountingplate that is standard delivered with the cam can only be used on the ceiling. The eufy cam software supports 180 degrees rotation and not 90 degrees. Therefore I designed this bracket so I can mount the camera to the wall to view my 3D printer and also use it as a security camera. </p><figure class... | [
"security",
"mountingbracket",
"eufy"
] | Gadgets > Photo & Video | [
"875011/images/image_1_compressed.jpg"
] | [
"875011/stls/Base schroef montage v2.stl"
] | CC-BY | https://www.printables.com/model/875011 | data_0045.tar |
73243 | Mouser - Articulated Model | <p>The mousers are one of my favorite robots from my childhood, these little robotic chompers have been on my list to model for a while, I hope you enjoy them as much as I do.</p>
<p>Designed in 1/6th scale,</p>
<p>The Mousers (M.obile O.ffensive U.nderground S.earch E.xcavation & R.etrieval S.entries), are small, ... | [
"toy",
"vase",
"animation",
"scan",
"assembly",
"comics",
"mouse",
"robot",
"sla",
"figure",
"mechanical",
"scale",
"articulated",
"articulation",
"printinplace",
"quickprint",
"lcd",
"bender",
"3dscan",
"ninja",
"thingiverse",
"3dscanner",
"leonardo",
"sls",
"articul... | Toys & Games > Action Figures & Statues | [
"73243/images/image_1_compressed.jpg",
"73243/images/image_10_compressed.jpg",
"73243/images/image_11_compressed.jpg",
"73243/images/image_12_compressed.jpg",
"73243/images/image_13_compressed.jpg",
"73243/images/image_14_compressed.jpg",
"73243/images/image_15_compressed.jpg",
"73243/images/image_16_... | [
"73243/stls/Body.stl",
"73243/stls/Head_Closed_Mouth_updated.stl",
"73243/stls/Head_open_mouth.stl",
"73243/stls/Left_leg_Non-Articulated.stl",
"73243/stls/Left_Leg_With_Articulation_fixed.stl",
"73243/stls/Right_Leg_Non-Articulated.stl",
"73243/stls/Right_Leg_With_Articulation_fixed.stl",
"73243/stls... | CC-BY | https://www.printables.com/model/73243 | data_0045.tar |
484051 | Mouthless Expression mask | <p>MY PRINT SETTINGS</p><p>Ender 3 compatible, Printed on ender 5 plus</p><p>CURA SETTINGS</p><ul><li>0.2mm layer height</li><li>0.6mm nozzle</li><li>yes supports, 5% density, 45 overhang angle</li><li>yes adhesion, Raft</li><li>15 infill</li><li>gyroid infill pattern</li></ul> | [
"mask",
"costume",
"anime",
"wearable",
"comfortable",
"highrise",
"highriseinvasion",
"mouthless"
] | Costumes & Accessories > Masks | [
"484051/images/image_1_compressed.jpg",
"484051/images/image_2_compressed.jpg"
] | [
"484051/stls/Mouthless_mask.stl",
"484051/stls/Mouthless_mask_W_slits.stl"
] | CC-BY | https://www.printables.com/model/484051 | data_0045.tar |
89540 | Movable 1:3 Model of Universal Robots UR5 | <p>This is a movable model of the Universal Robots UR5.<br>It will help you to understand robotic movement and singularity.<br>I designed it, using a solid model of the Robot and adding push fit joints.</p><h3>Print instructions</h3><p><strong>Printing Facts</strong></p><p>Printer: Prusa i3 MK3</p><p>Rafts: No</p><p>Su... | [
"robot",
"model",
"thingiverse",
"universalrobots",
"ur5"
] | Learning > Engineering | [
"89540/images/image_1_compressed.jpg",
"89540/images/image_10_compressed.jpg",
"89540/images/image_11_compressed.jpg",
"89540/images/image_12_compressed.jpg",
"89540/images/image_13_compressed.jpg",
"89540/images/image_14_compressed.jpg",
"89540/images/image_15_compressed.jpg",
"89540/images/image_16_... | [
"89540/stls/ur5-02-part01.stl",
"89540/stls/ur5-02-part02.stl",
"89540/stls/ur5-02-part03.stl",
"89540/stls/ur5-02-part04.stl",
"89540/stls/ur5-02-part05.stl",
"89540/stls/ur5-02-part06.stl",
"89540/stls/ur5-02-part07.stl",
"89540/stls/ur5-02-part08.stl",
"89540/stls/ur5-02-part09.stl",
"89540/stl... | CC-BY | https://www.printables.com/model/89540 | data_0045.tar |
896004 | Movable Type Stencil - Engravers Old English | <p>Inspired by traditional movable type and my love for letterpress printing, I have created a set of movable type stencils. Unlike other alphabet stencils, this system takes the guesswork out of letter spacing and keeps everything in line. I chose engravers old English because it is a set of letterpress type that I pe... | [
"type",
"art",
"drawing",
"stencil",
"template",
"drawingtool",
"letterpress",
"drawingtemplate",
"engraversoldenglish"
] | Art & Design > Other Art & Designs | [
"896004/images/image_1_compressed.jpg",
"896004/images/image_2_compressed.jpg",
"896004/images/image_3_compressed.jpg",
"896004/images/image_4_compressed.jpg"
] | [
"896004/stls/180mm composing stick.stl",
"896004/stls/220mm composing stick.stl",
"896004/stls/300mm composing stick.stl",
"896004/stls/400mm composing stick.stl",
"896004/stls/a lowercase.stl",
"896004/stls/A Uppercase.stl",
"896004/stls/b lowercase.stl",
"896004/stls/B Uppercase.stl",
"896004/stls... | CC0 | https://www.printables.com/model/896004 | data_0045.tar |
260562 | moyai keycap with keycap bottom | <p>remix of : <a href="https://www.thingiverse.com/thing:4804448">https://www.thingiverse.com/thing:4804448</a></p><p>YOU HAVE TO PRINT IT UPSIDE DOWN! (at least i had to)<br>rotate it 225° in the slicer and use support settings below.<br>after slicing it should come out like in the picture.</p><p>i sliced it in ultima... | [
"keycap",
"moai",
"cherrymx",
"mechanicalkeyboard",
"cherrykeycap",
"moyai"
] | Gadgets > Computers | [
"260562/images/image_1_compressed.jpg",
"260562/images/image_2_compressed.jpg"
] | [
"260562/stls/moaiv2.stl"
] | CC-BY | https://www.printables.com/model/260562 | data_0045.tar |
52370 | MPCNC Primo Nema17 drag chain mounts | <p>Drag chain mount for MPCNC Primo, remixed from thing <a href="https://www.thingiverse.com/thing:4613811">https://www.thingiverse.com/thing:4613811</a>. I chose to attach the drag chains directly to the Nema17 steppers with a design that straps around the motor and kept in tension with a screw.</p><p>The drag chains ... | [
"mpcnc",
"primo",
"mpcncprimo",
"dragchainmount"
] | Hobby & Makers > Mechanical Parts | [
"52370/images/image_1_compressed.jpg",
"52370/images/image_10_compressed.jpg",
"52370/images/image_11_compressed.jpg",
"52370/images/image_12_compressed.jpg",
"52370/images/image_2_compressed.jpg",
"52370/images/image_3_compressed.jpg",
"52370/images/image_4_compressed.jpg",
"52370/images/image_5_comp... | [
"52370/stls/nema17-mount-gantry.stl",
"52370/stls/nema17-mount-xrear.stl",
"52370/stls/nema17-mount-yleft.stl",
"52370/stls/truck_clamp_c_primo_plate-large.stl",
"52370/stls/truck_clamp_c_primo_plate-small.stl",
"52370/stls/truck_clamp_c_primo_raised.stl",
"52370/stls/truck_clamp_f_primo_raised.stl",
... | CC-BY | https://www.printables.com/model/52370 | data_0045.tar |
358694 | MPCNC PRIMO PEN HOLDER 65MM (MAKITA RT0700C) | <p>A pen holder for my MPCNC Primo build. It fits a 65 mm tool mount like Makita RT0700C.</p><p>I have printed this solid bat i think you can do it a little infill...<br>The basic idea was to quickly swap pen and spindle without having to remove the tool mount from MPCNC Primo.<br>I hope you like it and please, provide... | [
"mpcnc",
"makita",
"rt0700c"
] | Hobby & Makers > Tools | [
"358694/images/image_1_compressed.jpg",
"358694/images/image_2_compressed.jpg"
] | [
"358694/stls/MPCNC.Pen.Holder (1).stl"
] | CC-BY | https://www.printables.com/model/358694 | data_0045.tar |
236379 | ms.clippy | <p>I saw the contest and Ms clippy immediatly came to mind. a quick 10 minute print</p> | [
"clip",
"paper"
] | Household > Office | [
"236379/images/image_1_compressed.jpg"
] | [
"236379/stls/MS Clippy.stl"
] | CC0 | https://www.printables.com/model/236379 | data_0045.tar |
912092 | MTB evolve | [
"bike",
"mtb",
"downhill",
"evolve",
"biking",
"bikemtb"
] | Art & Design > 2D Plates & Logos | [
"912092/images/image_1_compressed.jpg",
"912092/images/image_2_compressed.jpg"
] | [
"912092/stls/MTBevolve (1).stl"
] | CC-BY | https://www.printables.com/model/912092 | data_0045.tar | |
484403 | MTB mud guard | <p>3D printed mud guard.</p>
<p>Printed diagonally, it fits on the print bed of an Ender 3 with 235x235mm bed size.</p>
<p>For flexibility, I printed it with PETG.</p>
<p>Fits very well in a "Rock Shox Recon" fork.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setti... | [
"mtb",
"thingiverse",
"emtb"
] | Sports & Outdoor > Outdoor Sports | [
"484403/images/image_1_compressed.jpg",
"484403/images/image_2_compressed.jpg"
] | [
"484403/stls/mudguard.stl"
] | CC-BY | https://www.printables.com/model/484403 | data_0045.tar |
547908 | MTB mudguard | <p>Mudguard that should fit on the majority of mountain bikes. This model was not made by me, I only made it universal, originally it was specific to one model of shocks. It is mounted with ZIP-ties.</p> | [
"fender",
"mtb",
"mtbmudguard"
] | Sports & Outdoor > Outdoor Sports | [
"547908/images/image_1_compressed.jpg"
] | [
"547908/stls/MTB mudguard v5.stl"
] | CC-BY | https://www.printables.com/model/547908 | data_0045.tar |
166083 | MTG Card Storage |
<p>This is a storage box and divider for magic cards. Designed to be stackable and support card sleeves.</p>
Category: Toy & Game Accessories
| [
"magicthegathering",
"thingiverse",
"playingcards"
] | Toys & Games > Outdoor Toys | [
"166083/images/image_1_compressed.jpg",
"166083/images/image_2_compressed.jpg"
] | [
"166083/stls/large_display_MTGDivider_V1_166083.stl",
"166083/stls/large_display_MTGStorage_V3_166083.stl",
"166083/stls/MTGDivider_V1.stl",
"166083/stls/MTGStorage_V3.stl"
] | CC-BY | https://www.printables.com/model/166083 | data_0045.tar |
223537 | MTG Counter |
<p>This is a remix mainly destinated to be mono color.</p>
<p>I also made a modification on the cap to point the current number, lightly imprinted the numbers to be painted easily, and made a small modification to the rod to be more tight.</p>
<p>Glue caps and rod at end.</p>
<h3>Print Settings</h3>
<p><strong>Print... | [
"mtg",
"lifecounter",
"thingiverse"
] | Toys & Games > Other Toys & Games | [
"223537/images/image_1_compressed.jpg",
"223537/images/image_2_compressed.jpg",
"223537/images/image_3_compressed.jpg",
"223537/images/image_4_compressed.jpg",
"223537/images/image_5_compressed.jpg"
] | [
"223537/stls/Cap_and_Button_small_mod.stl",
"223537/stls/Dials_with_numbers_Left.stl",
"223537/stls/Dials_with_numbers_Right.stl",
"223537/stls/Rod_Filet_tight.stl"
] | CC-BY | https://www.printables.com/model/223537 | data_0045.tar |
443135 | MTG counter and ability markers template | <blockquote><p><i>“Look, ma: no stl!”</i></p></blockquote><p>I really liked <a href="https://www.printables.com/social/115770-tony-youngblood">Tony Youngblood</a>'s <a href="https://www.printables.com/model/54172-magic-the-gathering-counters-chips-updated-5-3-201">Magic: The Gathering Counters</a>. But I wanted to make... | [
"mtg",
"template",
"tradingcardgame",
"3mf",
"mtgcounter"
] | Toys & Games > Other Toys & Games | [
"443135/images/image_1_compressed.jpg",
"443135/images/image_2_compressed.jpg"
] | [
"443135/stls/MTG counter template.stl"
] | LGPL | https://www.printables.com/model/443135 | data_0045.tar |
246770 | MTG Life Counter - 1000 | <p>This life counter is capable of counting to 1000 life!</p><p>It contains springs within the enclosure so your life total does not move with bumps and shakes.</p><p><strong>BOM:</strong></p><p>M3 x 16mm Screw x 2</p><p>M3 Washer x 4</p><p>Enclosure x 1</p><p>Counter Wheel x 3</p><p>Leaf Spring mk2 x 3</p><p><br><stro... | [
"spring",
"mtg",
"magic",
"counter",
"life",
"penguins",
"1000",
"digit",
"3digit"
] | Hobby & Makers > Other Ideas | [
"246770/images/image_1_compressed.jpg",
"246770/images/image_2_compressed.jpg",
"246770/images/image_3_compressed.jpg"
] | [
"246770/stls/Counter Wheel.stl",
"246770/stls/Enclosure mk2.stl",
"246770/stls/Leaf Spring mk2.stl"
] | CC-BY | https://www.printables.com/model/246770 | data_0045.tar |
1391062 | Mudguards - MTB | <p>3D printable model for a numberplate for mudguards of a downhill/enduro/XC mountain bike. We obtain the best results by printing with HP MJF in nylon PA12 or SLS with PP. If you want to print with FFF printers, try using flexible and tough material. We obtain the best results by printing with HP MJF in nylon PA12 or... | [
"diy",
"fender",
"mtb",
"sports",
"mudguard"
] | Sports & Outdoor > Outdoor Sports | [
"1391062/images/image_1_compressed.jpg",
"1391062/images/image_2_compressed.jpg"
] | [
"1391062/stls/Mudguard1.2LOGO.stl",
"1391062/stls/Mudguard_pigtail.stl",
"1391062/stls/Mudguard_pigtail_teddyED.stl"
] | CC0 | https://www.printables.com/model/1391062 | data_0045.tar |
502460 | Mug Name-Tag | <p>On our Assembly in GPN21 everybody ordered the Merch-Mug and there where quite some confusion which mug is mine??? I Quickly designed a Name-Tag and printed one for each!</p><p>This model fits the mugs from GPN21, as they are pretty standard it should it should work for others as well if your handle is ~16mm wide an... | [
"clip",
"mug",
"nametag"
] | Household > Kitchen | [
"502460/images/image_1_compressed.jpg",
"502460/images/image_2_compressed.jpg"
] | [
"502460/stls/clipBlank.stl"
] | GPL2.0 | https://www.printables.com/model/502460 | data_0045.tar |
231122 | Multi Color Fidget Cube | <p>Just follow the typical printing for the original fidget cube.</p> | [
"toy",
"puzzle",
"spinner",
"print",
"color",
"game",
"two",
"multi",
"infinity",
"fidget",
"mechanical",
"cube",
"fun",
"mmu2s",
"hinge",
"version",
"revision",
"revised",
"another",
"kobayashi",
"abs",
"pla",
"v2",
"yet",
"easy",
"cool",
"joint"
] | Toys & Games > Other Toys & Games | [
"231122/images/image_1_compressed.jpg",
"231122/images/image_2_compressed.jpg"
] | [
"231122/stls/Fidget Blocks.stl",
"231122/stls/Fidget Hinges.stl"
] | CC-BY | https://www.printables.com/model/231122 | data_0045.tar |
533523 | Multi color print test | <p>You can test multi-color prints on this model</p><p>A very nice project, I recommend it</p><p>https://buymeacoffee.com/gttelewizortv</p> | [
"multicolor",
"test",
"tester",
"testprint",
"testmodel",
"testingmodel"
] | 3D Printers > Test Models | [
"533523/images/image_1_compressed.jpg",
"533523/images/image_2_compressed.jpg",
"533523/images/image_3_compressed.jpg",
"533523/images/image_4_compressed.jpg",
"533523/images/image_5_compressed.jpg"
] | [
"533523/stls/Multi-color test print.stl"
] | CC0 | https://www.printables.com/model/533523 | data_0045.tar |
20422 | Multi color SpaceX Coaster | <p>This is a remix of the original model in Thingiverse<br/>
(thing:3222915 ).<br/>
I changed the height of the bottom of the honeycomb cells pattern in respect to the base of the X to do a color change in the SpaceX logo.</p>
<p>There are 2 versions of the same model, one with 0.2 mm of separation and other with 0.4 m... | [
"spacex",
"space",
"coaster",
"drinkcoaster",
"thingiverse"
] | Household > Kitchen | [
"20422/images/image_1_compressed.jpg",
"20422/images/image_2_compressed.jpg"
] | [
"20422/stls/02mm_mmt_multi_color_spacex_coaster.stl",
"20422/stls/04mm_mmt_multi_color_spacex_coaster.stl"
] | CC-BY | https://www.printables.com/model/20422 | data_0045.tar |
7727 | Multi colour Tiny Rick!!! | <p>Morty look at me I'm tiny Riiick!!!!<br/>
This model was made by 3D Print Guy on MyMiniFactory (<a href="https://www.myminifactory.com/users/3d_printguy">https://www.myminifactory.com/users/3d_printguy</a>) and I used Meshmixer to split the model in to multiple ones.<br/>
If you want to do the same I recomend using ... | [
"rickandmorty",
"multicolour",
"mmu2s"
] | Art & Design > Sculptures | [
"7727/images/image_1_compressed.jpg",
"7727/images/image_2_compressed.jpg",
"7727/images/image_3_compressed.jpg",
"7727/images/image_4_compressed.jpg",
"7727/images/image_5_compressed.jpg",
"7727/images/image_6_compressed.jpg",
"7727/images/image_7_compressed.jpg"
] | [
"7727/stls/eye-1.stl",
"7727/stls/eye-2.stl",
"7727/stls/eyebrow.stl",
"7727/stls/hair.stl",
"7727/stls/hand-1.stl",
"7727/stls/hand-2.stl",
"7727/stls/head.stl",
"7727/stls/lab-coat.stl",
"7727/stls/lower-teeth.stl",
"7727/stls/pants.stl",
"7727/stls/pedestal.stl",
"7727/stls/pupil-1.stl",
... | CC0 | https://www.printables.com/model/7727 | data_0045.tar |
1499144 | Multi Part Campfire (fusion360) | <p>The fusion file is provided would you want to adjust the tolerances or to see how it's done.</p><p>I added an intermediary step of the process just after making the base model printable to ease future potential remixes.</p><p><i><strong>Printing Information:</strong></i></p><ul><li>The flame doesn't require infill a... | [
"fire",
"fusion360",
"wood",
"multipart",
"singleextruder",
"flame",
"firepit",
"campfire",
"logs",
"nommurequired",
"logpile"
] | Art & Design > Sculptures | [
"1499144/images/image_1_compressed.jpg",
"1499144/images/image_2_compressed.jpg"
] | [
"1499144/stls/campfire.stl",
"1499144/stls/multipart_campfire.stl",
"1499144/stls/multipart_campfire_flame.stl",
"1499144/stls/multipart_campfire_wood.stl"
] | CC-BY | https://www.printables.com/model/1499144 | data_0045.tar |
1201034 | Multi Part "AJ the Frog" (fusion360) | <p>The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. </p><p> </p><p><i><strong>Printing Information:</strong></i></p><ul><li>Split the model into its parts and print them all separately.</li><li>No supports are needed (for the default size)... | [
"parametric",
"small",
"coin",
"frog",
"fusion360",
"treefrog",
"multipart",
"singleextruder",
"amphibian",
"aj",
"arboreal",
"nommurequired"
] | World & Scans > Animals | [
"1201034/images/image_1_compressed.jpg",
"1201034/images/image_2_compressed.jpg",
"1201034/images/image_3_compressed.jpg",
"1201034/images/image_4_compressed.jpg"
] | [
"1201034/stls/multipart_aj_treefrog.stl",
"1201034/stls/multipart_aj_treefrog_small.stl"
] | CC-BY | https://www.printables.com/model/1201034 | data_0045.tar |
29131 | multi scale portable generator | <p>I could not find a good scale generator anywhere, for free, and the ones I could buy were not all that impressive. So I modeled up one based on the one I own.</p>
<p>I provided 3 scales; 1/16, 1/12, and 1/10th. I exploded the 1/10th so you could print using different colors.</p>
<p>You can use the power panel I made... | [
"rc",
"generator",
"crawler",
"wpl",
"scalemodel",
"arma"
] | Hobby & Makers > RC & Robotics | [
"29131/images/image_1_compressed.jpg",
"29131/images/image_2_compressed.jpg",
"29131/images/image_3_compressed.jpg",
"29131/images/image_4_compressed.jpg",
"29131/images/image_5_compressed.jpg",
"29131/images/image_6_compressed.jpg",
"29131/images/image_7_compressed.jpg",
"29131/images/image_8_compres... | [
"29131/stls/generator-1-10-cap.stl",
"29131/stls/generator-1-10-core.stl",
"29131/stls/generator-1-10-lft-cvr.stl",
"29131/stls/generator-1-10-mount.stl",
"29131/stls/generator-1-10-panel.stl",
"29131/stls/generator-1-10-rt-cvr.stl",
"29131/stls/generator-1-10.stl",
"29131/stls/generator-1-12-mount.st... | CC-BY | https://www.printables.com/model/29131 | data_0045.tar |
109767 | Multi-compartment parametric organizer box |
<p>Completely parameterized mult-compartment organizer box. Change the number and dimension of the compartments in x and y dimensions as well as the height and wall/floor thickness.</p>
Category: Containers
| [
"thingiverse"
] | Household > Other House Equipment | [
"109767/images/image_1_compressed.jpg",
"109767/images/image_2_compressed.jpg",
"109767/images/image_3_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/109767 | data_0045.tar |
1318342 | Multi-Material kept simple | <p><strong>/!\ This is a concept, work in progres /!\</strong></p><p> Edit 9/03/2026: V2 available here: <a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.printables.com/model/1632023-v2-multi-material-kept-simple">https://www.printables.com/model/1632023-v2-multi-ma... | [
"prusa",
"multimaterial",
"mmu",
"mk3",
"color",
"multicolor",
"material",
"multi",
"mod",
"i3",
"mk3s",
"toolchanger",
"simple",
"addon",
"bicolor",
"keepitsimple",
"bmmu"
] | 3D Printers > Prusa Parts & Upgrades | [
"1318342/images/image_1_compressed.jpg",
"1318342/images/image_2_compressed.jpg",
"1318342/images/image_3_compressed.jpg",
"1318342/images/image_4_compressed.jpg",
"1318342/images/image_5_compressed.jpg",
"1318342/images/image_6_compressed.jpg"
] | [
"1318342/stls/BMMU - catcher.stl",
"1318342/stls/cage - catcher_sup_L.stl",
"1318342/stls/cage - catcher_sup_R_stock.stl",
"1318342/stls/cage - guide.stl",
"1318342/stls/Forme-Boîte.stl",
"1318342/stls/Sensor_cover_BMMU.stl"
] | GPL2.0 | https://www.printables.com/model/1318342 | data_0045.tar |
1499316 | Multi-Shape Drawing Stencil | <p><strong>All-In-One Shape Stencil for Art, School & Crafts</strong></p><p>A compact, easy-to-use Multi-Shape Drawing Stencil that includes a variety of geometric and creative shapes in different sizes in one tool. prints in a few minutes and is lightweight, practical, and durable. </p> | [
"art",
"geometric",
"school",
"drawing",
"stencil",
"craft",
"shapes"
] | Learning > Other 3D Objects for Learning | [
"1499316/images/image_1_compressed.jpg",
"1499316/images/image_2_compressed.jpg",
"1499316/images/image_3_compressed.jpg",
"1499316/images/image_4_compressed.jpg"
] | [
"1499316/stls/Shape Stencil v1.stl"
] | CC0 | https://www.printables.com/model/1499316 | data_0045.tar |
423158 | Multi-Use Case longer & wider Version | <p>This is another version of Multiuse-Csae.<br>It's longer and wider.<br>On this model, use also a section of 1.75mm filament inside the hinge to connect the lid to the base.</p> | [
"box",
"organizer",
"case",
"container",
"storagebox",
"toolbox"
] | Hobby & Makers > Organizers | [
"423158/images/image_1_compressed.jpg",
"423158/images/image_2_compressed.jpg"
] | [
"423158/stls/Dieti_Boden_lang_breit_v2.stl",
"423158/stls/Dieti_Deckel_lang_breit_v2.stl"
] | CC-BY | https://www.printables.com/model/423158 | data_0045.tar |
421305 | Multi-Use Case longer Version | <p>This is a longer version of the Multi-Use Case.</p><p>On this model, use also a section of 1.75mm filament inside the hinge to connect the lid to the base.</p><p><strong>Update Version 2</strong> <br>Fixed bug in bottom layer</p> | [
"box",
"organizer",
"case",
"container",
"storagebox"
] | Hobby & Makers > Organizers | [
"421305/images/image_1_compressed.jpg",
"421305/images/image_2_compressed.jpg",
"421305/images/image_3_compressed.jpg"
] | [
"421305/stls/Dieti_Boden_long_v2.stl",
"421305/stls/Dieti_Deckel_long_v2.stl"
] | CC-BY | https://www.printables.com/model/421305 | data_0045.tar |
827238 | MultiBoard - MultiConnect - Universal Game Controller Mount | [
"gaming",
"gamepad",
"multiboard",
"multiconnect"
] | Hobby & Makers > Organizers | [
"827238/images/image_1_compressed.jpg",
"827238/images/image_2_compressed.jpg",
"827238/images/image_3_compressed.jpg",
"827238/images/image_4_compressed.jpg",
"827238/images/image_5_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/827238 | data_0045.tar | |
813667 | MultiBoard easier fit snap | <p>If like me you are using the 8mn away from the wall version of the Multiboard, you might be worried to break a panel while adding a new snap.</p><p>It happened to me twice already :(</p><p>Therefore here is a slighly easier fit snap with which I had no issues so far.</p><p>It remains solid but I would not use it for... | [] | Hobby & Makers > Organizers | [
"813667/images/image_1_compressed.jpg"
] | [
"813667/stls/SnapCut.stl"
] | CC0 | https://www.printables.com/model/813667 | data_0045.tar |
977427 | Multiboard Halter für Nozzle-Cleaner | <p>Ein einfacher Halter für 2 Röhrchen mit den Düsenreinigern. </p><p>Zur Befestigung am Multiboard wird noch ein Snap benötigt.</p><p>Drucken mit 0,2 mm Layerhöhe, Supports und 15% Infill. </p> | [
"multiboard"
] | Hobby & Makers > Tools | [
"977427/images/image_1_compressed.jpg"
] | [
"977427/stls/Nozzle-Cleaner-Hold.stl"
] | CC0 | https://www.printables.com/model/977427 | data_0045.tar |
885610 | Multiboard holder for TS101 soldering iron and CNC Kitchen tip set | <p>This is a Multiboard holder for the TS101, the CNC Kitchen tip set, and three additional tips. Made to fit inside the big-thread push-fit holes.</p><ul><li>Miniware TS101 Smart Soldering Iron</li><li>CNC Kitchen Soldering Tips SET compatible with TS100 & TS101 (https://cnckitchen.store/products/ts100-101-adapter... | [
"ts101",
"multiboard"
] | Hobby & Makers > Tools | [
"885610/images/image_1_compressed.jpg",
"885610/images/image_2_compressed.jpg",
"885610/images/image_3_compressed.jpg"
] | [
"885610/stls/multiboard ts101 holder v4.stl",
"885610/stls/multiboard ts101 holder v5.stl"
] | CC-BY | https://www.printables.com/model/885610 | data_0045.tar |
1007555 | Multiboard iFixit Pro Tech Toolkit / Tool Roll Mount (Wall Mount) | <p>A mount for the iFixit Pro Tech Toolkit, with or without the Mako driver kit, using Multiconnect for Multiboard and direct-to-wall compatibility.</p><h4><strong>Variants</strong></h4><ul><li>Full Toolkit: Fits the full toolkit with everything inside of the tool roll.</li><li>Without Mako: Fits the remaining tools in... | [
"wallmount",
"ifixit",
"multiboard",
"multiboardremix",
"multiconnect"
] | Hobby & Makers > Organizers | [
"1007555/images/image_1_compressed.jpg"
] | [
"1007555/stls/iFixit Pro Tech Toolkit Mount - Full Toolkit.stl",
"1007555/stls/iFixit Pro Tech Toolkit Mount - Without Mako.stl"
] | GPL3.0 | https://www.printables.com/model/1007555 | data_0045.tar |
986242 | Multiboard Parkside Crimping Pliers Holder | [
"parkside",
"crimper",
"crimping",
"multiboard"
] | Hobby & Makers > Organizers | [
"986242/images/image_1_compressed.jpg",
"986242/images/image_2_compressed.jpg"
] | [
"986242/stls/Multiboard Parkside Crimping Pliers Holder.stl"
] | CC-BY | https://www.printables.com/model/986242 | data_0045.tar | |
875602 | Multiboard screwdriver holder/shelf inserts | <p>Different size inserts to help stabilize different sized screwdrivers for:</p><p>Multiboard screwdriver holder/shelf <a href="https://www.printables.com/model/730939">https://www.printables.com/model/730939</a></p><p>Fairly basic but works. Initial hole sizes are rather arbritrary but working well for me so far.</p>... | [
"shelf",
"honeycomb",
"screwdriverholder",
"multiboard"
] | Hobby & Makers > Organizers | [
"875602/images/image_1_compressed.jpg",
"875602/images/image_2_compressed.jpg",
"875602/images/image_3_compressed.jpg",
"875602/images/image_4_compressed.jpg",
"875602/images/image_5_compressed.jpg",
"875602/images/image_6_compressed.jpg",
"875602/images/image_7_compressed.jpg"
] | [
"875602/stls/Multiboard Screwdriver Holder - Insert Large 15mm.stl",
"875602/stls/Multiboard Screwdriver Holder - Insert Medium 10mm.stl",
"875602/stls/Multiboard Screwdriver Holder - Insert Small 7mm.stl"
] | CC-BY | https://www.printables.com/model/875602 | data_0045.tar |
814881 | Multiboard Spirit Level holder | <p>I didn't find a holder for spirit level so made my own.</p><p>Inside is 20mm and be <strong>cheerful</strong> where you push because I accidentally broke the right one of mine and had to use glue put it back on.</p><p>Print setting: infill 15%, support, and parameter 4 </p> | [
"holder",
"spiritlevel",
"multiboard"
] | Hobby & Makers > Organizers | [
"814881/images/image_1_compressed.jpg"
] | [
"814881/stls/Spirit level holder-Fusion.stl"
] | CC-BY | https://www.printables.com/model/814881 | data_0045.tar |
862354 | Multiboard Tube/ hook hanger | <p>Needed to hang my tube of lube so quickly made up this part in fusion 360. uses the pegboard to click in horizontally.</p><p> </p> | [
"hanger",
"tube",
"lube",
"pegboard",
"paint",
"neat",
"multiboard",
"multiboardpegboard",
"multiboardholder"
] | Hobby & Makers > Organizers | [
"862354/images/image_1_compressed.jpg",
"862354/images/image_2_compressed.jpg"
] | [
"862354/stls/tube hanger click.stl"
] | CC-BY | https://www.printables.com/model/862354 | data_0045.tar |
210340 | Multicolor Cat Toy / Buntes Katzenspielzeug | <h3>Cat Toy</h3><p>consists of three rings and an inner sphere.<br>Can be printed in the colors your cat likes most.</p><p>How to assemble:</p><ul><li>put ring2 over ring1</li><li>place sphere inside</li><li>put ring3 over other rings by squeezing them</li></ul><h3>Katzenspielzeug</h3><p>besteht aus drei Ringen und ein... | [
"toy",
"christmas",
"cat",
"sphere",
"weihnachten",
"kugel",
"spielzeug",
"geschenk",
"katze",
"bunt"
] | Toys & Games > Other Toys & Games | [
"210340/images/image_1_compressed.jpg",
"210340/images/image_2_compressed.jpg",
"210340/images/image_3_compressed.jpg",
"210340/images/image_4_compressed.jpg",
"210340/images/image_5_compressed.jpg"
] | [
"210340/stls/inner_sphere.stl",
"210340/stls/ring1.stl",
"210340/stls/ring2.stl",
"210340/stls/ring3.stl"
] | CC-BY | https://www.printables.com/model/210340 | data_0045.tar |
909074 | Multicolor Mimic Chest | <p><a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.printables.com/@Teirale">Teirale</a> published the excellent supportless mimic model <a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.printables.com/model/152255-34-mimic-chest-no-su... | [
"mini",
"multicolor",
"dnd",
"miniature",
"tabletop",
"rpg",
"mimic"
] | Tabletop Miniatures > Characters & Monsters | [
"909074/images/image_1_compressed.jpg",
"909074/images/image_2_compressed.jpg",
"909074/images/image_3_compressed.jpg",
"909074/images/image_4_compressed.jpg",
"909074/images/image_5_compressed.jpg",
"909074/images/image_6_compressed.jpg"
] | [
"909074/stls/Mimic no support.stl"
] | CC-BY | https://www.printables.com/model/909074 | data_0045.tar |
409667 | multicolored lizzard | 4 color print | Download free 3D printable STL models | [] | Art & Design > Other Art & Designs | [
"409667/images/image_1_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/409667 | data_0045.tar |
963 | Multicolors 2D plotter adapter | <p>Features:</p>
<ul>
<li>Easy to calibrate pen alignment and depth.</li>
<li>Multicolors.</li>
<li>Can be added/removed to the existing extruder easily.</li>
<li>Uses magnets (8x2mm) instead of an elastic to push the pen onto the bed.</li>
<li>Uses M4 screws and hexagon nuts.</li>
<li>Should be relatively easy to use ... | [] | 3D Printers > Other Printer Parts & Upgrades | [
"963/images/image_1_compressed.jpg"
] | [
"963/stls/2d_plotter_-_pen_adjuster.stl",
"963/stls/2d_plotter_-_pen_adjuster_filler.stl",
"963/stls/2d_plotter_-_pen_carriage.stl",
"963/stls/2d_plotter_-_pen_cradle_85mm_hexagon.stl",
"963/stls/2d_plotter_-_pen_cradle_sharpie_112_to_122mm_circ.stl",
"963/stls/2d_plotter_for_prusa_printers_mk25_mk3.stl"
... | CC-BY | https://www.printables.com/model/963 | data_0045.tar |
307135 | Multifunction Arm with Short Arm and Base for C-Clamp | <p>i had to make a shorter arm segment for my home work-station setup. also couldn't use the original desk clamp by <strong>RostaP</strong> so i remixed the base parts to work with the <a href="https://www.printables.com/model/21767-prusament-pet-g-clamp-optimized">optimized C-Clamp</a> by <strong>Perry </strong>then a... | [] | Household > Office | [
"307135/images/image_1_compressed.jpg",
"307135/images/image_2_compressed.jpg",
"307135/images/image_3_compressed.jpg"
] | [
"307135/stls/arm-honeycomb - SHORT.stl",
"307135/stls/Base-with-holow-4040-M5 - for C-Clamp.stl",
"307135/stls/nut for C-Clamp.stl",
"307135/stls/ROUND BASE for C-Clamp.stl"
] | CC0 | https://www.printables.com/model/307135 | data_0045.tar |
1193975 | Multifunctional Arm (Phone holder) – arm reinforcement | <p>Increasing the arm stiffness of the multifunctional holder.<br>It's still not ideal, but better than the original version.<br>Added STEP version, you can adjust.</p><figure class="media"><oembed url="https://youtube.com/shorts/gA4JTFWj_aY?feature=share"></oembed></figure> | [
"stand",
"arm"
] | Hobby & Makers > Tools | [
"1193975/images/image_1_compressed.jpg",
"1193975/images/image_2_compressed.jpg",
"1193975/images/image_3_compressed.jpg"
] | [
"1193975/stls/Arm 100 reinforcement.stl",
"1193975/stls/Arm 150 reinforcement.stl",
"1193975/stls/Arm 200 reinforcement.stl",
"1193975/stls/Arm 50 reinforcement.stl",
"1193975/stls/Arm 75 reinforcement.stl"
] | CC-BY | https://www.printables.com/model/1193975 | data_0045.tar |
514741 | Multimeter lead backpack | <p>I made this little clip on backpack to wrap the wire of my multimeter leads around to keep things a little more tidy. Super handy print jajaum3d! top notch work.</p><p>I fixed the two peices with some M3 flathead screws, but you could also just use a bit of glue. whatever you've got laying around realy. I also ended... | [
"stand",
"cord",
"multimeter",
"wire",
"cordwrap",
"wrap"
] | Gadgets > Other Gadgets | [
"514741/images/image_1_compressed.jpg",
"514741/images/image_2_compressed.jpg",
"514741/images/image_3_compressed.jpg"
] | [
"514741/stls/Probe_Lead_Back_Pack_Clip.stl",
"514741/stls/Probe_Lead_Back_Pack_Wire_Wraper_V1.stl"
] | CC-BY | https://www.printables.com/model/514741 | data_0045.tar |
928491 | multiple sizes - Ortlieb QL1/ QL2 HOOK INSERTS pannier | <p>These clips are ment for the Ortlieb panniers with the QL1 / QL2 klick system.</p><p><a href="https://www.ortlieb.com/de_en/ql1-ql2-hook-inserts">https://www.ortlieb.com/de_en/ql1-ql2-hook-inserts</a></p><p>The originale ones come in the sizes 8mm and 11mm to fit the Bike rack.</p><p> </p><p>These here are desi... | [
"bike",
"ortlieb",
"fahrrad",
"pannier",
"satteltasche"
] | Sports & Outdoor > Outdoor Sports | [
"928491/images/image_1_compressed.jpg"
] | [
"928491/stls/10,5 Ortlieb pannier QL1, QL2-hook insert.stl",
"928491/stls/11,5 Ortlieb pannier QL1, QL2-hook insert.stl",
"928491/stls/12,5 Ortlieb pannier QL1, QL2-hook insert.stl",
"928491/stls/13,5 Ortlieb pannier QL1, QL2-hook insert.stl",
"928491/stls/8,5 Ortlieb pannier QL1, QL2-hook insert.stl",
"9... | CC0 | https://www.printables.com/model/928491 | data_0045.tar |
64833 | Multipurpose Watering can | <p>This is our multipurpose watering can. It can be disassambled to reveal a shovel and a rake. Providing you with <strong>every tool for your gardening needs</strong>. The can stores 1.5 litres and you don't risk to lose any tool of the set. </p><figure class="image"><img src="https://media.printables.com/media/p... | [
"can",
"modular",
"supportless",
"shovel",
"tools",
"rake"
] | Household > Outdoor & Garden | [
"64833/images/image_1_compressed.jpg",
"64833/images/image_10_compressed.jpg",
"64833/images/image_2_compressed.jpg",
"64833/images/image_3_compressed.jpg",
"64833/images/image_4_compressed.jpg",
"64833/images/image_5_compressed.jpg",
"64833/images/image_6_compressed.jpg",
"64833/images/image_7_compre... | [
"64833/stls/Can.stl",
"64833/stls/Rake.stl",
"64833/stls/Shovel.stl"
] | CC0 | https://www.printables.com/model/64833 | data_0045.tar |
942598 | Mushroom Twisty Fidget | <p>A small twisty magnetic fidget in fungi form.</p><figure class="media"><oembed url="https://www.youtube.com/watch?v=JEpwT3CWw_c"></oembed></figure><p><a href="https://www.youtube.com/watch?v=JEpwT3CWw_c">https://www.youtube.com/watch?v=JEpwT3CWw_c</a></p><p> </p><h3>Customization</h3><h4> </h4><h4>Core Opt... | [
"magnet",
"fidget",
"mushroom",
"magnetic",
"twisty"
] | Toys & Games > Other Toys & Games | [
"942598/images/image_1_compressed.jpg"
] | [
"942598/stls/Assemble Top - 3x3mm.stl",
"942598/stls/Assemble Top - 6x3mm.stl",
"942598/stls/Bottom - Click - 3x3mm.stl",
"942598/stls/Bottom - Click - 6x3mm.stl",
"942598/stls/Bottom - Rattle - 3x3mm.stl",
"942598/stls/Bottom - Rattle - 6x3mm.stl",
"942598/stls/Core Bottom.stl",
"942598/stls/Core Top... | CC-BY | https://www.printables.com/model/942598 | data_0045.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.