model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
814281 | No room screwdriver – right angle screw driver | <p>This screwdriver is designed to allow the use of any standard bit in otherwise impossible to reach places.</p><p>Additionally, it has an adjustable handle allowing you to change the tool's overall length, providing extra reach and more leverage if needed.</p><p>The end effectively adds only 0.5 mm to the height of t... | [
"screwdriver",
"screwdriverholder",
"rightangle"
] | Hobby & Makers > Tools | [
"814281/images/image_1_compressed.jpg",
"814281/images/image_2_compressed.jpg"
] | [
"814281/stls/No room screwdriver - extention handle - v9.stl",
"814281/stls/No room screwdriver - magnet insert - v7.stl",
"814281/stls/No room screwdriver - no magnet insert - v7.stl",
"814281/stls/No room screwdriver v9.stl"
] | CC-BY | https://www.printables.com/model/814281 | data_0045.tar |
874415 | No Tool Idler Mod for the MMU3 | <p>I loved the tool-less approach of Dunil's idler so I've updated it for the MMU3!<br>Most of MMU3 parts should work without any modifications.</p><p>--Notable Changes--</p><p>-I left out the filament holder and cable loops as they seemed unnecessary.</p><p>-Removed the hex wrench holder for the left side to allow to ... | [
"mmu3"
] | 3D Printers > Prusa Parts & Upgrades | [
"874415/images/image_1_compressed.jpg",
"874415/images/image_2_compressed.jpg",
"874415/images/image_3_compressed.jpg"
] | [
"874415/stls/lock-for-idler-body-left-hand-ver-aa.stl",
"874415/stls/lock-for-idler-body-right-hand-ver-aa.stl",
"874415/stls/mmu3-ele-cover-M1.stl",
"874415/stls/mmu3-idler-body-M1.stl",
"874415/stls/mmu3-pulley-body-M1.stl"
] | GPL2.0 | https://www.printables.com/model/874415 | data_0045.tar |
311819 | No-supports M-LOK Folding Bipod | <p>This is a printable bipod suitable for light duty, such as an air gun or 22LR.<br><br>I based the design loosely on the Magpul bipods but there are some notable differences. I have prioritized compactness, as this bipod is intended to be used on a folding air rifle. <br><br>You will need some metal hardware to ... | [
"bipod"
] | Sports & Outdoor > Outdoor Sports | [
"311819/images/image_1_compressed.jpg",
"311819/images/image_2_compressed.jpg",
"311819/images/image_3_compressed.jpg"
] | [
"311819/stls/Leg - Arm.stl",
"311819/stls/Leg - Button.stl",
"311819/stls/Leg - ElbowButton.stl",
"311819/stls/Leg - MirrorSlider.stl",
"311819/stls/Leg - Mount.stl",
"311819/stls/Leg - Slider.stl"
] | CC-BY | https://www.printables.com/model/311819 | data_0045.tar |
1046693 | nobufil Filament Swatch | <p>Designed for 3D printing enthusiasts and professionals, it's a great way to display your <a href="https://www.nobufil.com/">nobufil filament </a>range and ensure perfect color matches for your projects.</p><p>Introducing our Swatch, a customizable plastic tile designed to help you visualize and compare appearance of... | [
"box",
"card",
"filament",
"test",
"material",
"calibration",
"sample",
"abs",
"petg",
"printing",
"swatch",
"filamentsample",
"chip",
"colors",
"customized",
"calibrationtest",
"asa",
"colorswatch",
"filamentswatch",
"materialswatch",
"colourswatch",
"samples",
"filament... | 3D Printers > Test Models | [
"1046693/images/image_1_compressed.jpg",
"1046693/images/image_2_compressed.jpg",
"1046693/images/image_3_compressed.jpg"
] | [
"1046693/stls/nobufil swatch.stl"
] | CC0 | https://www.printables.com/model/1046693 | data_0045.tar |
1063637 | NobuPhil the Bull | <p>Whether as a unique decorative piece, collectible item, or eye-catching feature for your next project, NobuPhil brings character and strength to any space. In the design phase we were focusing on several features to allow you to check accuracy of your printer as well as performance of the material you have in use. S... | [
"sample",
"mascot",
"filamenttest",
"materialtest",
"nobufil"
] | Art & Design > Sculptures | [
"1063637/images/image_1_compressed.jpg",
"1063637/images/image_2_compressed.jpg",
"1063637/images/image_3_compressed.jpg"
] | [
"1063637/stls/NobuPhil.stl"
] | CC0 | https://www.printables.com/model/1063637 | data_0045.tar |
279124 | Nocturnal No Birds | <p>Nocturnal statue from The Elder Scrolls witout the unprintable birds. Some minor artifacts from the birds are still visible in the pormes.</p> | [
"statue",
"figurine",
"skyrim",
"oblivion",
"daedric",
"theelderscrolls",
"nocturnal"
] | Toys & Games > Action Figures & Statues | [
"279124/images/image_1_compressed.jpg",
"279124/images/image_2_compressed.jpg"
] | [
"279124/stls/Nocturnal No Birds.stl"
] | CC0 | https://www.printables.com/model/279124 | data_0045.tar |
91369 | Noel Train | <p>The Noel Train was printed on the MK3S printer<br>The filament was Prusament PLA, Lipstick Red, Vanilla White and Pearl Green, the print load on the mk3 was usually for making four trains as once, printer on the textured build plate.<br>Note - I print PETG to and since PLA and PETG don't print well on the same sides... | [] | Seasonal designs > Winter & Christmas & New Year's | [
"91369/images/image_1_compressed.jpg",
"91369/images/image_2_compressed.jpg"
] | [
"91369/stls/Blk-Chimney.stl",
"91369/stls/Grn-Roofs.stl",
"91369/stls/Grn-Wheels.stl",
"91369/stls/Red-Bases.stl",
"91369/stls/Wht-Caboose.stl",
"91369/stls/Wht-Engine.stl",
"91369/stls/Wht-Noel.stl"
] | GPL2.0 | https://www.printables.com/model/91369 | data_0045.tar |
547065 | Noisy Cricket | <p>Noisy Cricket From Men in Black.</p><p> </p> | [
"gun",
"mib",
"movieprops",
"meninblack"
] | Costumes & Accessories > Props | [
"547065/images/image_1_compressed.jpg"
] | [
"547065/stls/noisycricket.stl"
] | CC-BY | https://www.printables.com/model/547065 | data_0045.tar |
1005545 | NorcoT K1 Max Riser Filament Sensor Remix | <p>This adapts the corner piece of the original file to allow you to mount the filament sensor along the riser. Tony F's File was adjusted to allow the filament sensor to be mounted, the other files were used as references and deserve credit. </p> | [
"filament",
"sensor",
"riser",
"k1",
"k1max",
"k1maxriser"
] | 3D Printers > Creality Parts & Upgrades | [
"1005545/images/image_1_compressed.jpg",
"1005545/images/image_2_compressed.jpg"
] | [
"1005545/stls/Adapted Corner For Filament Sensor.stl"
] | CC0 | https://www.printables.com/model/1005545 | data_0045.tar |
355649 | Nose eyeglass holder | <p>Scanned and edited my nose so you can put your glasses on them. </p> | [
"scan",
"eyeglasses",
"glasses",
"nose"
] | Art & Design > Sculptures | [
"355649/images/image_1_compressed.jpg",
"355649/images/image_2_compressed.jpg",
"355649/images/image_3_compressed.jpg"
] | [
"355649/stls/theNose.stl"
] | CC0 | https://www.printables.com/model/355649 | data_0045.tar |
541414 | Not Another Makeup Organizer | <p>I've saw the model that @ChuckTheSquirrel created, however, wifey wanted a middle sized row. So I've made one myself from scratch, following the initial layout, but with a 3d row at 7.5cm instead of 10cm. Took 5 hours and 220g of filament to print on X1C, 0.2 height, 0.4 nozzle, standard settings.</p><p>Walls are 1.... | [
"organizer",
"makeup"
] | Household > Bathroom | [
"541414/images/image_1_compressed.jpg",
"541414/images/image_2_compressed.jpg"
] | [
"541414/stls/organizator cosmetice v7.stl"
] | CC-BY | https://www.printables.com/model/541414 | data_0045.tar |
129649 | Notebook table stand - Notebook vertical holder | [
"holder",
"stand",
"pc",
"vertical",
"verticalstand",
"notebookstand",
"notebook",
"notebookholder"
] | Gadgets > Computers | [
"129649/images/image_1_compressed.jpg",
"129649/images/image_10_compressed.jpg",
"129649/images/image_11_compressed.jpg",
"129649/images/image_2_compressed.jpg",
"129649/images/image_3_compressed.jpg",
"129649/images/image_4_compressed.jpg",
"129649/images/image_5_compressed.jpg",
"129649/images/image... | [
"129649/stls/Curve_stande_notebook_fixed.stl"
] | CC0 | https://www.printables.com/model/129649 | data_0045.tar | |
887509 | Notos 10 shot 22 magazine | <p>See attached PDF for instructions. Enjoy!</p><p>Note: Not mentioned in instructions, but required a 3x2 magnet.</p><p> </p> | [] | Sports & Outdoor > Outdoor Sports | [
"887509/images/image_1_compressed.jpg"
] | [
"887509/stls/mag main body.stl",
"887509/stls/mag top plate.stl",
"887509/stls/mag wheel.stl"
] | GPL2.0 | https://www.printables.com/model/887509 | data_0045.tar |
890137 | Notos Bipod Mount And Handguard | <p>Flip 180 degrees for ease of printing. Required 3 heat set inserts and 3 M3x20 screws.</p><p>Secure with 3m double sided tape to prevent from rotating</p><p> </p> | [] | Sports & Outdoor > Outdoor Sports | [
"890137/images/image_1_compressed.jpg",
"890137/images/image_2_compressed.jpg",
"890137/images/image_3_compressed.jpg",
"890137/images/image_4_compressed.jpg",
"890137/images/image_5_compressed.jpg"
] | [
"890137/stls/bipod.stl",
"890137/stls/notos-pic-v3.1.stl",
"890137/stls/notos-pic-v4.stl"
] | GPL2.0 | https://www.printables.com/model/890137 | data_0045.tar |
557745 | Nozzel Holder, Nozzel case, Ender, Prusa, Creality | <p>Case for nozzles with M6 thread. The first screw-in is the hardest. Automatic color change can be set in PrusaSlicer.</p> | [
"holder",
"case",
"nozzel"
] | 3D Printers > Creality Parts & Upgrades | [
"557745/images/image_1_compressed.jpg",
"557745/images/image_2_compressed.jpg",
"557745/images/image_3_compressed.jpg",
"557745/images/image_4_compressed.jpg",
"557745/images/image_5_compressed.jpg",
"557745/images/image_6_compressed.jpg"
] | [
"557745/stls/dysze.stl"
] | CC0 | https://www.printables.com/model/557745 | data_0045.tar |
368801 | Nozzle - Nozzle Box - Rack Remix without supports | <p>The original Rack from JustTry was hard to print without supports. So I remixed the Rack real quick, so it doesn't need supports anymore.</p> | [
"nozzlebox"
] | 3D Printers > Accessories | [
"368801/images/image_1_compressed.jpg",
"368801/images/image_2_compressed.jpg"
] | [
"368801/stls/Rack_Stand_2.stl"
] | CC0 | https://www.printables.com/model/368801 | data_0045.tar |
231079 | Nozzle Brush 9000 - No bridging, no support, 13.5cm | <p>This Nozzle brush is has the head flipped so there is no need for any support or bridging. <br>I also shortened it to 13.5cm so it fit in the Ender 3 storage drawers.</p><p>It's a remix of a remix since most of the work was already done. I Just needed to tweak a few things to get it the way I wanted it.</p><p>M... | [
"ender",
"brush",
"ender3",
"nozzlecleaner"
] | 3D Printers > Accessories | [
"231079/images/image_1_compressed.jpg",
"231079/images/image_2_compressed.jpg"
] | [
"231079/stls/Noozle Brush.stl"
] | CC-BY | https://www.printables.com/model/231079 | data_0045.tar |
152717 | Nozzle Changer Nut Grip | <p>If you use a nut with a shaft for removing the nozzle, this grip helps protect you from the heat and use more torque.</p>
<p>Preferably printed in something heat resistant like PETG, ASA, ABS etc. But PLA works as well, if you minimise the time on the nozzle.</p>
<p>It is for a hexagonal 6.3mm shaft. Tight fit, so y... | [
"thingiverse"
] | 3D Printers > Accessories | [
"152717/images/image_1_compressed.jpg",
"152717/images/image_2_compressed.jpg",
"152717/images/image_3_compressed.jpg"
] | [
"152717/stls/Grip_nozzle_changer.stl"
] | CC-BY | https://www.printables.com/model/152717 | data_0045.tar |
1432036 | Nozzle Cleaner for Voron 2.4 using Bambu Scrubber + Wiper | [] | 3D Printers > Voron Parts & Upgrades | [
"1432036/images/image_1_compressed.jpg",
"1432036/images/image_2_compressed.jpg"
] | [
"1432036/stls/V24 Bambu Scrub + Wiper.stl"
] | GPL3.0 | https://www.printables.com/model/1432036 | data_0045.tar | |
1370956 | Nozzle cleaner holder (Neptune 4, Neptune 4 PRO) - 4mm Brush | <h3><strong>Printing</strong></h3><p>I use ABS for this version, as its heat resistant, but PETG should be okay,<br>Infill: 15-25%<br>Precise Walls: On<br>Order: I/O/I</p><p>don't use 3M VHB tape as the backing tape for the brush, just for the part that connects to the bed, use clear thin double tape if you accidentaly... | [
"nozzle",
"brush",
"cleaner",
"neptune4pro",
"neptune4"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1370956/images/image_1_compressed.jpg",
"1370956/images/image_2_compressed.jpg",
"1370956/images/image_3_compressed.jpg"
] | [
"1370956/stls/Nozzle cleaner holder remix for thin nozzle cleaners.stl"
] | CC0 | https://www.printables.com/model/1370956 | data_0045.tar |
378515 | Nozzle cleaning needle holder/storage | <p>Store your cleaner needles in one place. Quickly and easy print.</p><p>-No support</p><p>-PLA;PETG is plenty</p><p>-scale the cap to 101% if your printer is not calibrated well, so the thread will work surely.</p> | [
"nozzle",
"store",
"clean",
"needle"
] | 3D Printers > Accessories | [
"378515/images/image_1_compressed.jpg"
] | [
"378515/stls/cap.stl",
"378515/stls/needle holder.stl"
] | CC0 | https://www.printables.com/model/378515 | data_0045.tar |
115724 | nozzle for a vaccum cleaner | <p>This is just another nozzle for a vaccumcleaner. Nothing spcial about it. Measurements are nicludet in on of the pictures. If need to make an change, I included the .step and .f3d. </p><p><strong>UPDATE:</strong><br>I forogot to mention that the .f3d is somewhat paramteric as it uses parameters for the importen... | [
"nozzle",
"vaccum",
"vacuumcleaner"
] | Household > Other House Equipment | [
"115724/images/image_1_compressed.jpg",
"115724/images/image_2_compressed.jpg"
] | [
"115724/stls/Staubsaugerdüse lang und schlank.stl"
] | GPL2.0 | https://www.printables.com/model/115724 | data_0045.tar |
1308156 | Nozzle for solar fountain 10mm | <p>Nozzle for solar fountain - 10mm diameter.</p> | [
"water",
"garden",
"nozzle",
"10mm",
"solar",
"fountain"
] | Household > Outdoor & Garden | [
"1308156/images/image_1_compressed.jpg"
] | [
"1308156/stls/Fontain - 10mm.stl"
] | CC-BY | https://www.printables.com/model/1308156 | data_0045.tar |
526853 | Nozzle Holder - Nozzle Case | <p>Remixed a box design to hold my nozzles in it. Contains 4 spots for diameters from 0.1 to 1mm and 3 sections for Hardened Steel nozzles, CHT nozzles and brass nozzles. Fully printable without any supports, requires a relatively large bed. Printed on a Bambu Lab P1P.</p> | [
"holder",
"nozzle",
"nozzleholder",
"nozzlebox"
] | 3D Printers > Accessories | [
"526853/images/image_1_compressed.jpg",
"526853/images/image_2_compressed.jpg"
] | [
"526853/stls/3D Printable Hinges - ProductDesignOnline.com v3.stl"
] | CC-BY | https://www.printables.com/model/526853 | data_0045.tar |
143440 | Nozzle organizer | <p><strong>Nozzle organizer with different mounts</strong></p><p>I have seen many nozzle organizers. Only not with the nozzles I use. I use the standard prusa nozzles: 0.25, 0.4, 0.6, 0.8. This nozzle organizer is very easy to remove it from the mount. I made it interchangeable so you can put it in different holders on... | [
"nozzleholder",
"nozzlebox",
"interchangeable"
] | 3D Printers > Accessories | [
"143440/images/image_1_compressed.jpg",
"143440/images/image_2_compressed.jpg",
"143440/images/image_3_compressed.jpg",
"143440/images/image_4_compressed.jpg"
] | [
"143440/stls/Nozzle organizer bottom mount.stl",
"143440/stls/Nozzle organizer cover.stl",
"143440/stls/Nozzle organizer remix mount.stl",
"143440/stls/Nozzle organizer screen mount.stl",
"143440/stls/Nozzle organizer.stl"
] | CC-BY | https://www.printables.com/model/143440 | data_0045.tar |
815635 | Nozzle scrubber brush holder Prusa XL | <p>Prints without supports if oriented correctly.</p><p>Edit: uploaded v2 with tighter tolerances</p> | [
"brush",
"screwless",
"brushholder",
"nozzlecleaner"
] | 3D Printers > Prusa Parts & Upgrades | [
"815635/images/image_1_compressed.jpg",
"815635/images/image_2_compressed.jpg",
"815635/images/image_3_compressed.jpg"
] | [
"815635/stls/Brushholder_v1.stl",
"815635/stls/Brushholder_v2.stl"
] | GPL2.0 | https://www.printables.com/model/815635 | data_0045.tar |
81939 | nozzle size indicator v2 | <p>A new version of a nozzle indicator gadget (in case you are like me and often forget which nozzle is installed in which printer). It is much simpler to put together than v1. Instead of fiddling with the little legs, just glue the centers of the top and bottom part together.</p><p>Nozzle names (and other parameters) ... | [] | 3D Printers > Accessories | [
"81939/images/image_1_compressed.jpg",
"81939/images/image_2_compressed.jpg",
"81939/images/image_3_compressed.jpg"
] | [
"81939/stls/nozzle indicator v2 - wheel - 2 color.stl",
"81939/stls/nozzle indicator v2.stl",
"81939/stls/nozzle indicator.stl"
] | CC0 | https://www.printables.com/model/81939 | data_0045.tar |
146647 | Nozzle tool | <p>Printed in petg. Can be inserted cold but easier when still warm</p> | [] | 3D Printers > Accessories | [
"146647/images/image_1_compressed.jpg",
"146647/images/image_2_compressed.jpg"
] | [
"146647/stls/Nozzle knob.stl"
] | GPL2.0 | https://www.printables.com/model/146647 | data_0045.tar |
393179 | Nozzle Torque Wrench_6X3_Magnet | <p>This is a remix, because i did not have 9x5 magnets but 6x3. Also i changed the housing of the rotor to click in. This way it just hold in place, but can rotate as need. The 6x3 neodinium magnet hold the tool just fine.</p>
<h3>Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>Voron Switchwire</p>
<p class="de... | [
"nozzle",
"thingiverse"
] | Hobby & Makers > Tools | [
"393179/images/image_1_compressed.jpg",
"393179/images/image_2_compressed.jpg",
"393179/images/image_3_compressed.jpg",
"393179/images/image_4_compressed.jpg",
"393179/images/image_5_compressed.jpg"
] | [
"393179/stls/TC_A.stl",
"393179/stls/TC_B.stl",
"393179/stls/T_Rotor.stl"
] | CC-BY | https://www.printables.com/model/393179 | data_0045.tar |
344263 | Nozzle Wrench for Hex Shank Square Drive Socket Adapter 30 mm | <p>Extended nozzle wrench insert to fit 20-50 mm long hex shank socket adapter.</p><p>Very tight fit for maximal torque power and no slipping.</p><p> </p><p>print settings: 0.20mm</p><p>filament: PLA (tested on Fillamentum)</p><p>15% gyroid infill</p><p>I recommend vertical shells to be at least 4 layers 1.67 mm t... | [
"wrench",
"nozzle",
"30mm",
"nozzlewrench"
] | 3D Printers > Accessories | [
"344263/images/image_1_compressed.jpg"
] | [
"344263/stls/Nozzle_Wrench_Hex_Shank_Socket_Adapter_30mm.stl"
] | CC-BY | https://www.printables.com/model/344263 | data_0045.tar |
15954 | NPC Collection 2 | <p>New NPCs!</p>
<p>Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a href="https://www.patreon.com/mz4250">https://www.patreon.com/mz4250</a></p>
<p>Patrons have access to all my files in o... | [
"knight",
"fighter",
"warrior",
"dnd",
"spy",
"wizard",
"pathfinder",
"thingiverse",
"archer",
"warlock",
"paladin",
"sorcerer",
"ranger",
"rogue",
"thief",
"mage",
"npc",
"npcs"
] | Toys & Games > Board Games | [
"15954/images/image_1_compressed.jpg",
"15954/images/image_10_compressed.jpg",
"15954/images/image_11_compressed.jpg",
"15954/images/image_12_compressed.jpg",
"15954/images/image_13_compressed.jpg",
"15954/images/image_14_compressed.jpg",
"15954/images/image_15_compressed.jpg",
"15954/images/image_16_... | [
"15954/stls/abjurer.stl",
"15954/stls/apprentice_wizard.stl",
"15954/stls/archdruid.stl",
"15954/stls/archer.stl",
"15954/stls/bard.stl",
"15954/stls/blackguard.stl",
"15954/stls/champion.stl",
"15954/stls/conjurer.stl",
"15954/stls/diviner.stl",
"15954/stls/enchanter.stl",
"15954/stls/evoker.st... | CC-BY | https://www.printables.com/model/15954 | data_0045.tar |
312902 | NR200 lift kit for 25mm fans | <p>I've glued, sanded and painted the bottom in the photo, which is why the join line and layer lines are mostly hidden. The original model by <a href="https://www.thingiverse.com/tangcla">tangcla</a> is on Thingiverse, but I reuploaded it here with permission so it can be added to my NR200 parts collection. Check my r... | [
"water",
"master",
"mod",
"cooler",
"feet",
"cooling",
"kit",
"25mm",
"watercooling",
"lift",
"riser",
"fans",
"nr200"
] | Gadgets > Computers | [
"312902/images/image_1_compressed.jpg"
] | [
"312902/stls/Riser_Back_25.stl",
"312902/stls/Riser_Front_25.stl"
] | CC-BY | https://www.printables.com/model/312902 | data_0045.tar |
1217039 | Nuclear Cooling Tower Pen Holder | <p><i><strong>Update:</strong> </i>I recommend printing the 126mm tall model. The wall thickness of the 100mm tall model seemed to create some weird artifacts in my testing. <br><br>A neat little pen holder, make-up brush holder, paintbrush holder, smaller-holder-things-holder, or just about whatever you can fit i... | [
"office",
"holder",
"desk",
"pencil",
"pen",
"marker",
"tower",
"nuclear",
"brush",
"cooling",
"penholder",
"paint",
"pencilholder",
"utensil",
"craft",
"makeup",
"hyperboloid"
] | Household > Office | [
"1217039/images/image_1_compressed.jpg",
"1217039/images/image_2_compressed.jpg"
] | [
"1217039/stls/Cooling Tower v4.100mm.stl",
"1217039/stls/Cooling Tower v5.126mm.stl"
] | CC-BY | https://www.printables.com/model/1217039 | data_0045.tar |
238212 | Nuka Cola Knob | <p>Fall"out" in love with this whimsical knob replacement. Love me some Nuka Cola......ahhhhhhh!!! </p> | [
"nuka",
"cola",
"fallout"
] | 3D Printers > Other Printer Parts & Upgrades | [
"238212/images/image_1_compressed.jpg"
] | [
"238212/stls/Nuka Cola Cap Knob.stl"
] | CC0 | https://www.printables.com/model/238212 | data_0045.tar |
264364 | Number Cookie Cutter | [
"cookiecutter",
"number"
] | Household > Kitchen | [
"264364/images/image_1_compressed.jpg",
"264364/images/image_2_compressed.jpg",
"264364/images/image_3_compressed.jpg",
"264364/images/image_4_compressed.jpg"
] | [
"264364/stls/Number0.stl",
"264364/stls/Number1.stl",
"264364/stls/Number2.stl",
"264364/stls/Number3.stl",
"264364/stls/Number4.stl",
"264364/stls/Number5.stl",
"264364/stls/Number6.stl",
"264364/stls/Number7.stl",
"264364/stls/Number8.stl",
"264364/stls/Number9.stl",
"264364/stls/NumberCookieC... | CC0 | https://www.printables.com/model/264364 | data_0045.tar | |
1069363 | Number Game | <p>This toy was produced years ago but I have not found a 3D printed version yet. The game will require logical thought and is suitable for both kids and adults. The idea is to slide the tiles to an order desired by the player or observer.</p><p>I suggest that the Frame and the tiles be printed at .15mm for... | [
"toy",
"games",
"casual",
"number",
"brainchallenge"
] | Toys & Games > Puzzles & Brain-teasers | [
"1069363/images/image_1_compressed.jpg",
"1069363/images/image_2_compressed.jpg",
"1069363/images/image_3_compressed.jpg",
"1069363/images/image_4_compressed.jpg",
"1069363/images/image_5_compressed.jpg"
] | [
"1069363/stls/base.stl",
"1069363/stls/Bottom frame beam.stl",
"1069363/stls/tile 1.stl",
"1069363/stls/tile 10.stl",
"1069363/stls/tile 11.stl",
"1069363/stls/tile 12.stl",
"1069363/stls/tile 13.stl",
"1069363/stls/tile 14.stl",
"1069363/stls/tile 15.stl",
"1069363/stls/tile 2.stl",
"1069363/st... | CC-BY | https://www.printables.com/model/1069363 | data_0045.tar |
1038465 | Number ring for dart board | [] | Sports & Outdoor > Indoor Sports | [
"1038465/images/image_1_compressed.jpg"
] | [
"1038465/stls/No_11.stl",
"1038465/stls/No_20.stl",
"1038465/stls/No_3.stl",
"1038465/stls/No_9.stl",
"1038465/stls/Ring_Joint.stl"
] | CC-BY | https://www.printables.com/model/1038465 | data_0045.tar | |
1129452 | Numbered keychains predefined from 1 to 300 and empty tag | <ul><li>Numbered tags diameter 32 mm</li><li>Predefined numbers from 1 to 300</li><li>Optional 2 colors print without MMU/AMS - easy add filament change in slicer in 1 mm height</li><li>Includes also empty tag for own text/number - easy add text in slicer</li></ul> | [
"dogtag",
"tag",
"keychain",
"keyring",
"keyrings",
"numbers",
"keychains",
"tags",
"number",
"numberplate"
] | Hobby & Makers > Other Ideas | [
"1129452/images/image_1_compressed.jpg",
"1129452/images/image_2_compressed.jpg",
"1129452/images/image_3_compressed.jpg"
] | [
"1129452/stls/empty_tag.stl",
"1129452/stls/numbered_keychain_1-30.stl",
"1129452/stls/numbered_keychain_121-150.stl",
"1129452/stls/numbered_keychain_151-180.stl",
"1129452/stls/numbered_keychain_181-210.stl",
"1129452/stls/numbered_keychain_211-240.stl",
"1129452/stls/numbered_keychain_241-270.stl",
... | CC-BY | https://www.printables.com/model/1129452 | data_0045.tar |
467313 | Nut Bracket for Fysetc Voron V0 CNC Gantry | <p>This is the nut bracket used to screw the XY joint and Fysetc's CNC gantry together.</p><p><strong>To assemble you need:</strong></p><ul><li>6x M3 hex nuts</li></ul><p><strong>Print Settings:</strong></p><ul><li>Material: ABS</li><li>Layer height: 0.20mm</li><li>Supports: no</li><li>Perimeters: 3</li></ul><p><strong... | [
"voronv0",
"voronv01",
"voronv02"
] | 3D Printers > Voron Parts & Upgrades | [
"467313/images/image_1_compressed.jpg",
"467313/images/image_2_compressed.jpg",
"467313/images/image_3_compressed.jpg"
] | [
"467313/stls/[a]_FysetcGantry_Nut_Bracket_x2.stl"
] | CC-BY | https://www.printables.com/model/467313 | data_0045.tar |
521127 | Nutella Glass Candy Dispenser modified inner parts for bigger sweets/nuts | <p>i took the liberty of adapting the inner parts again for bigger sweets/nuts: </p><p>enlarged inlet from the upper part</p><p>modified bearing seat in upper and lower part (for M8 screw)</p><p>screw and handle adapted to M8 thread.</p><p> </p><p>many thanks to all the designers who create and improve the ca... | [] | Gadgets > Other Gadgets | [
"521127/images/image_1_compressed.jpg",
"521127/images/image_2_compressed.jpg",
"521127/images/image_3_compressed.jpg",
"521127/images/image_4_compressed.jpg"
] | [
"521127/stls/Drehgriff M8.stl",
"521127/stls/Oberteil groß.stl",
"521127/stls/Schnecke groß M8.stl",
"521127/stls/Unterteil groß.stl"
] | CC-BY | https://www.printables.com/model/521127 | data_0045.tar |
1420 | Nvidia Jetson Nano Case – NanoMesh Mini | <p>NanoMesh Mini is a compact case design for the Jetson Nano Developer Kit. This case be used entirely tool-less, although it can be secured with four case screws. The carrier board is held in place with stand-off pins. To secure the case together you can use 4 x m3 screws anywhere between 13-50mm long from the bottom... | [
"case",
"computer",
"robotics",
"nvidia",
"nvidiajetson",
"jetsonnano",
"ai"
] | Hobby & Makers > Electronics | [
"1420/images/image_1_compressed.jpg",
"1420/images/image_2_compressed.jpg",
"1420/images/image_3_compressed.jpg",
"1420/images/image_4_compressed.jpg",
"1420/images/image_5_compressed.jpg"
] | [
"1420/stls/nanomeshmini-bottom-jetson-nano-devkit-case.stl",
"1420/stls/nanomeshmini-top-jetson-nano-devkit-case.stl"
] | CC-BY | https://www.printables.com/model/1420 | data_0045.tar |
100256 | NZXT H1 Fan Bracket |
<p>I wanted a bracket so I could mount fans in the back of my NZXT H1 case without them being visible while still being able to use the exiting back panel. Since I couldn't find anything quite what I wanted I designed my own.</p>
<p>This should work for 140mm and 120mm fans, though I've only tested with 140mm fans, sp... | [
"fanmount",
"thingiverse",
"coolingfan",
"nzxt",
"nzxth1"
] | Gadgets > Computers | [
"100256/images/image_1_compressed.jpg",
"100256/images/image_2_compressed.jpg",
"100256/images/image_3_compressed.jpg",
"100256/images/image_4_compressed.jpg",
"100256/images/image_5_compressed.jpg",
"100256/images/image_6_compressed.jpg",
"100256/images/image_7_compressed.jpg",
"100256/images/image_8... | [
"100256/stls/NZXT_H1_Back_Panel_bottom_left.stl",
"100256/stls/NZXT_H1_Back_Panel_bottom_right.stl",
"100256/stls/NZXT_H1_Back_Panel_top_left.stl",
"100256/stls/NZXT_H1_Back_Panel_top_right.stl"
] | CC-BY | https://www.printables.com/model/100256 | data_0045.tar |
1431900 | Oak leaf | <p>Decorative oak leaf, 5cm in size, 1mm thin. Feel free to scale.</p><p><strong>Print setting</strong></p><ul><li>any filament</li><li>0.4mm nozzle (or smaller)</li><li>0.2mm layer height</li><li>no supports</li><li>default infill</li></ul><p><strong>Additional models from series</strong></p><p>Maple leaf - <a hr... | [
"halloween",
"decoration",
"autumn",
"leaf",
"oak"
] | Household > Home Decor | [
"1431900/images/image_1_compressed.jpg"
] | [
"1431900/stls/oak leaf.stl"
] | CC-BY | https://www.printables.com/model/1431900 | data_0045.tar |
935203 | Oathbringer - Dummy13 | <p><i>“Accept the pain, but don't accept that you deserved it.” - Dalinar Kholin</i>, from Oathbringer by Brandon Sanderson<br><br>A neat little, to-scale (roughly, at least, Alethi heights are weird to have to work with) Oathbringer, to include the glyphs along the blade. It fits very snugly in the standard Dummy13 ha... | [
"blade",
"sword",
"13",
"dummy",
"stormlightarchive",
"stormlight",
"thirteen",
"dummy13",
"dalinar",
"oathbringer",
"shardblade",
"invested"
] | Toys & Games > Action Figures & Statues | [
"935203/images/image_1_compressed.jpg",
"935203/images/image_2_compressed.jpg",
"935203/images/image_3_compressed.jpg"
] | [
"935203/stls/OathbringerD13.stl"
] | CC-BY | https://www.printables.com/model/935203 | data_0045.tar |
345006 | Oathbringer Bookmark | A bookmark modeled after the legendary Shardblade Oathbringer. | Download free 3D printable STL models | [
"bookmark",
"books",
"stormlightarchive",
"cosmere"
] | Toys & Games > Other Toys & Games | [
"345006/images/image_1_compressed.jpg",
"345006/images/image_2_compressed.jpg"
] | [
"345006/stls/OathbringerBookmark v1.stl"
] | CC-BY | https://www.printables.com/model/345006 | data_0045.tar |
467980 | Oathsworn Monster Miniature Hex Base with Arrow | <p>Thanks Armand7734 and JMVent.</p><p>I created this model because the monsters' miniatures of Oathsworn didn't fit in the models previously uploaded here.</p><p>I made two versions, one with a hole in the center to save on filament and another one without the hole.</p><p>You can add a filament change command at the r... | [
"tabletop",
"boardgames",
"boardgame",
"rpg",
"thingiverse",
"oathsworn"
] | Tabletop Miniatures > Miniature Gaming Accessories | [
"467980/images/image_1_compressed.jpg",
"467980/images/image_2_compressed.jpg",
"467980/images/image_3_compressed.jpg"
] | [
"467980/stls/center_hole_oathsworn_monster_hex_adapter.stl",
"467980/stls/oathsworn_monster_hex_adapter.stl"
] | CC-BY | https://www.printables.com/model/467980 | data_0045.tar |
910728 | Object Ruler for Photography | <p>The most difficult thing I had when printing from a 3D printer and putting it up for sale was that I had to take the product dimensions one by one with a standard ruler in the photo. I tried to solve this problem with a simple 3-axis ruler.</p><p>Ruler is 25cm with precision of 5mm. Xyz axis are tight fit together.&... | [
"photograph",
"photo",
"figure",
"ruler",
"photography",
"size",
"rulerincentimeters",
"dimension"
] | Hobby & Makers > Tools | [
"910728/images/image_1_compressed.jpg",
"910728/images/image_2_compressed.jpg",
"910728/images/image_3_compressed.jpg",
"910728/images/image_4_compressed.jpg",
"910728/images/image_5_compressed.jpg",
"910728/images/image_6_compressed.jpg"
] | [
"910728/stls/ruler.stl",
"910728/stls/rulerx.stl",
"910728/stls/rulery.stl",
"910728/stls/rulerz.stl"
] | CC-BY | https://www.printables.com/model/910728 | data_0045.tar |
160063 | Octagonal Fountain Pen |
<p>I messed up my Pilot Metropolitan trying to forced patina it, so I made a replacement.</p>
<p>It has a M10x0.75 thread, which accepts Pilot Metropolitan and Custom 74 nib sections and probably others.</p>
<p>Print thread1 and thread2 and check if they fit before printing the whole thing.</p>
<p>The cap and barrel... | [
"thingiverse",
"fountainpen",
"fountainpens"
] | Hobby & Makers > Other Ideas | [
"160063/images/image_1_compressed.jpg",
"160063/images/image_2_compressed.jpg",
"160063/images/image_3_compressed.jpg",
"160063/images/image_4_compressed.jpg",
"160063/images/image_5_compressed.jpg",
"160063/images/image_6_compressed.jpg"
] | [
"160063/stls/Pen_Body.stl",
"160063/stls/Pen_Cap.stl",
"160063/stls/thread1.stl",
"160063/stls/thread2.stl"
] | CC0 | https://www.printables.com/model/160063 | data_0045.tar |
354462 | octopus | <p>Polipo sorretto da un supporto circolare, con tentacoli e particolari negli occhi, molto realistico e particolare. Anche in misure più piccole è molto semplice da stampare per qualsiasi tipo di stampante 3d sia a resina che ha filamento, tentacoli sono attorcigliati se stessi e questo rende il modello ancora p... | [
"octopus",
"polipo",
"stammapolipo"
] | Art & Design > Sculptures | [
"354462/images/image_1_compressed.jpg",
"354462/images/image_2_compressed.jpg",
"354462/images/image_3_compressed.jpg",
"354462/images/image_4_compressed.jpg",
"354462/images/image_5_compressed.jpg",
"354462/images/image_6_compressed.jpg"
] | [
"354462/stls/Octopus.stl"
] | CC-BY | https://www.printables.com/model/354462 | data_0045.tar |
43848 | Oculus Quest 2 Cableclip Elite Strap | <p>Snaps on Elite Strap. Cable can be removed. For cables thicker than the Link cable. My cables are 5.2mm and 5.1mm</p>
<h3>Print instructions</h3><p>Printed in PETG, 0.3 Layer Height, printed with Brim for better Heatbed adhesion</p> | [] | Gadgets > Virtual Reality | [
"43848/images/image_1_compressed.jpg",
"43848/images/image_2_compressed.jpg"
] | [
"43848/stls/cableclip-quest-elite.stl"
] | CC0 | https://www.printables.com/model/43848 | data_0045.tar |
287601 | Oculus Quest 2 Case | <p>Created by combining Yanev's parametric case, with a 3d scan of the packaging that the quest came in.</p><p>It's not a small model, you'll need a >300 mm bed to fit it. </p> | [
"case",
"oculus",
"oculusquest2"
] | Toys & Games > Other Toys & Games | [
"287601/images/image_1_compressed.jpg",
"287601/images/image_2_compressed.jpg"
] | [
"287601/stls/Box Latch x2.stl",
"287601/stls/case lid.stl",
"287601/stls/handle.stl",
"287601/stls/quest case bottom.stl"
] | CC-BY | https://www.printables.com/model/287601 | data_0045.tar |
43370 | Oculus Quest 2 Elite Link Cable Clip | <p>Snaps firmly onto the rigid arm of the Elite Strap and holds the Oculus Link cable. The Link cable can be removed without removing the clip.</p>
<h3>Print instructions</h3><p>Print on one side; brim recommended for improved bed adhesion.</p> | [
"oculusquest",
"oculus",
"oculusquest2"
] | Gadgets > Virtual Reality | [
"43370/images/image_1_compressed.jpg",
"43370/images/image_2_compressed.jpg",
"43370/images/image_3_compressed.jpg",
"43370/images/image_4_compressed.jpg"
] | [
"43370/stls/linkclip-clip.stl"
] | CC0 | https://www.printables.com/model/43370 | data_0045.tar |
897543 | Oculus Quest 2 Lens Cover - IPD2 | [
"lens",
"cover",
"lenscap",
"krytka",
"kryt"
] | Gadgets > Virtual Reality | [
"897543/images/image_1_compressed.jpg",
"897543/images/image_2_compressed.jpg"
] | [
"897543/stls/OculusQuest2LensCoverIPD2.stl"
] | CC0 | https://www.printables.com/model/897543 | data_0045.tar | |
269264 | oil barrel | [
"barrel",
"oil"
] | Art & Design > Sculptures | [
"269264/images/image_1_compressed.jpg"
] | [
"269264/stls/OIL BARREL.stl"
] | BSD | https://www.printables.com/model/269264 | data_0045.tar | |
82084 | Oil Barrel (drum) | <p><a href="https://www.printables.com/model/81927-europalette">EUR pallet model</a> </p><p> </p><h4>Volumes </h4><p>¹/16 ~ 50mℓ (55×36.5)</p><p>¹/35 ~ 4.4mℓ(25×16.7)</p> | [
"barrel",
"openscad",
"drum",
"scalemodel",
"scad"
] | World & Scans > Architecture & Urbanism | [
"82084/images/image_1_compressed.jpg"
] | [
"82084/stls/21-303OilBarrelScale16wall6.stl",
"82084/stls/21-303OilBarrelScale35.stl",
"82084/stls/21-303OilBarrelScale35Filled.stl",
"82084/stls/277EuroPoolPaletteScale35.stl"
] | CC0 | https://www.printables.com/model/82084 | data_0045.tar |
1089182 | Oil Drain Pan Cap and Plug - PAN 11838 | <p>The Cap is the same as the original. However, the Plug didn't fit and I couldn't find one that did. So I made the plug and made it look similar to the cap. I think these oil pans are all a bit different and it is hard to find parts that fit even though the pans look similar or even have the same mo... | [
"cap",
"plug",
"drain",
"pan",
"oil",
"11838"
] | Household > Garage | [
"1089182/images/image_1_compressed.jpg",
"1089182/images/image_2_compressed.jpg",
"1089182/images/image_3_compressed.jpg",
"1089182/images/image_4_compressed.jpg",
"1089182/images/image_5_compressed.jpg"
] | [
"1089182/stls/OilDrainPanCap-Pan11838.stl",
"1089182/stls/OilDrainPanPlug-Pan11838.stl"
] | CC-BY | https://www.printables.com/model/1089182 | data_0045.tar |
476688 | OK hand | its not mine but i think its cool | Download free 3D printable STL models | [] | 3D Printers > Other Printer Parts & Upgrades | [
"476688/images/image_1_compressed.jpg"
] | [
"476688/stls/model_1.stl"
] | CC0 | https://www.printables.com/model/476688 | data_0045.tar |
217693 | Olaf magnet | <p>EN</p><p>My family very likes Frozen world, especially this one little cute snowman. So I was little motivated to create this guy for greetings my family every time, when they go to frozen world, to your refrigerator. Now, I would like to share this little one with all of u.</p><p>For completing, use 2x ferrite magn... | [
"magnets",
"magnetka"
] | Household > Home Decor | [
"217693/images/image_1_compressed.jpg",
"217693/images/image_2_compressed.jpg"
] | [
"217693/stls/olaf.stl"
] | CC-BY | https://www.printables.com/model/217693 | data_0045.tar |
505068 | Old Skoda Logo Keychain | <p>Keyring with the old Skoda logo on it.</p><p> </p><p>I printed it with 0.2 mm layer, 100 % infill.</p> | [
"keychain",
"skoda",
"fabia",
"octavia",
"superb",
"scala"
] | Hobby & Makers > Automotive | [
"505068/images/image_1_compressed.jpg",
"505068/images/image_2_compressed.jpg"
] | [
"505068/stls/Skoda_keyring_logo_old.stl"
] | CC-BY | https://www.printables.com/model/505068 | data_0045.tar |
320360 | OLD! CHECK PROFILE Darts Stand Display with stems and flights holder | <p>CHECK THE NEW ONE ON MY PROFILE<br>https://www.printables.com/model/1134797-v20-dart-hub-stand-display-holder<br>A simple to print solid darts stand holder /display. With space to hold your favourite stems and flights for that set. The top part clips into the base.<br> </p> | [
"display",
"dart",
"holder",
"stand",
"darts",
"hold",
"flights",
"stems"
] | Sports & Outdoor > Indoor Sports | [
"320360/images/image_1_compressed.jpg",
"320360/images/image_2_compressed.jpg"
] | [
"320360/stls/Stand Frecce Organizer V2.stl",
"320360/stls/Stand Frecce Top V2.stl"
] | CC0 | https://www.printables.com/model/320360 | data_0045.tar |
337839 | Oloid desktop toy | cool toy that roll＇s straight even tho it doesn＇t look like it could | Download free 3D printable STL models | [
"oloid"
] | Art & Design > Sculptures | [
"337839/images/image_1_compressed.jpg"
] | [
"337839/stls/oloid.stl"
] | CC0 | https://www.printables.com/model/337839 | data_0045.tar |
234381 | Oloid Magnetic Fidget | <p>In order to print it you should Print 2 Bodies and 1 joiner.<br>For the magnets I used some Round 6*3mm.<br> </p><p>Both the Bodies and the Joiner can be printed without supports if they are oriented in the vertical.</p> | [
"magnets",
"oloid"
] | Toys & Games > Other Toys & Games | [
"234381/images/image_1_compressed.jpg",
"234381/images/image_2_compressed.jpg",
"234381/images/image_3_compressed.jpg"
] | [
"234381/stls/Oloid - Body.stl",
"234381/stls/Oloid - Joinner.stl"
] | CC-BY | https://www.printables.com/model/234381 | data_0045.tar |
315932 | Olympus TG-6 Tough Lens Cap | <p>Very basic lens cap for the Olympus Tough TG-6. This cap goes easily over the stock lens ring and tightens with a clockwise twist. No supports were necessary when printed on my Prusa MK3S with PLA filament. Fit was excellent.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="d... | [
"thingiverse"
] | Gadgets > Photo & Video | [
"315932/images/image_1_compressed.jpg",
"315932/images/image_2_compressed.jpg"
] | [
"315932/stls/210718_olympus_lens_cap_v5.stl"
] | CC-BY | https://www.printables.com/model/315932 | data_0045.tar |
228907 | Omnipod syringe to insulin vial coupler |
<p>I'm a happy Omnipod user, but one of the things I miss from Medtronic's system are the little couplers that come with each reservoir, making it very convenient to transfer insulin from vial to the reservoir. With Omnipod's system, there's no such thing. You have to awkwardly hold the vial and syringe with one han... | [
"thingiverse",
"diabetes",
"insulin",
"omnipod",
"type1diabetes",
"insulinpump",
"t1diabetes",
"insulinbottle"
] | Hobby & Makers > Other Ideas | [
"228907/images/image_1_compressed.jpg",
"228907/images/image_2_compressed.jpg",
"228907/images/image_3_compressed.jpg",
"228907/images/image_4_compressed.jpg"
] | [
"228907/stls/vial_coupler.stl"
] | CC-BY | https://www.printables.com/model/228907 | data_0045.tar |
1001125 | On-Table Microphone Stand for Philips Speechmike | <p>This is just a tabletop microphone stand for the Philips Speechmike.</p><p>If you are dictating reports with voice recognition using the Speechmike, and you are tired of holding the microphone with your hand… try this stand and free your hand for more important tasks.</p> | [
"stand",
"tabletop",
"microphone",
"philips",
"medicine",
"staender",
"handsfree",
"mikrofon",
"dictation",
"speechmike"
] | Healthcare > Medical Tools | [
"1001125/images/image_1_compressed.jpg"
] | [
"1001125/stls/Microphone 7.stl"
] | CC0 | https://www.printables.com/model/1001125 | data_0045.tar |
924417 | One filament guide | [
"prusa",
"display",
"spool",
"mk3",
"holder",
"print",
"printer",
"filament",
"guide",
"hold",
"accessories",
"wire",
"mk4",
"mk",
"guided",
"accesoires"
] | 3D Printers > Prusa Parts & Upgrades | [
"924417/images/image_1_compressed.jpg"
] | [
"924417/stls/ONE Filament Guide (Left).stl",
"924417/stls/ONE Filament Guide (Right).stl"
] | GPL2.0 | https://www.printables.com/model/924417 | data_0045.tar | |
845672 | One Line Art: Pizza Necklace | <p>Link to the metal loops: https://www.amazon.com/Connecting-Jewelry-Necklace-Bracelet-Supplies/dp/B08D6Q717X/ref=sr_1_4?dib=eyJ2IjoiMSJ9.D84q5_NhdHcFFfgREnOQYx9174NHe-Or1n674ng5rLODOAJ5R9Ral8Bo38WNuUrmmJoIzy4a3bEByl9-eyE42X0z8mUqBxrWWq-Oy-TCrz3_mr96AX3ZilY9ZeBqwEnruMRVNPf_WHRAjq8flvflvJl7gDBKwuB9fqSdiWUkeGZJTty4Pnluj... | [
"earrings",
"jewelry",
"art",
"gift",
"one",
"necklace",
"pizza",
"women",
"line"
] | Fashion > Women | [
"845672/images/image_1_compressed.jpg"
] | [
"845672/stls/Pizza.stl"
] | CC-BY | https://www.printables.com/model/845672 | data_0045.tar |
295671 | One Line Woman Face Wall Art | <p>A single line woman face wall art.</p><p>Simple print. Scale to fit your printer size.</p><p>Added dfx and svg files for laser cutter.</p> | [
"art",
"wallmount",
"lineart",
"woman",
"wallmounted",
"singlelineart",
"oneline",
"wallart",
"2dwallsign"
] | Art & Design > Wall-mounted | [
"295671/images/image_1_compressed.jpg",
"295671/images/image_2_compressed.jpg"
] | [
"295671/stls/one-line-woman-face-wall-art.stl"
] | CC0 | https://www.printables.com/model/295671 | data_0045.tar |
591252 | One Piece Keychain | Explore the beauty of the One Piece Keychain with our 3D printing project. Our specially crafted STL files are optimized | Download free 3D printable STL models | [
"multicolor",
"anime",
"keychain",
"onepiece",
"articat3d"
] | Art & Design > 2D Plates & Logos | [
"591252/images/image_1_compressed.jpg"
] | [
"591252/stls/Keychain - One Piece Skull_Amarelo.stl",
"591252/stls/Keychain - One Piece Skull_Branco.stl",
"591252/stls/Keychain - One Piece Skull_Preto.stl",
"591252/stls/Keychain - One Piece Skull_Vermelho.stl"
] | CC0 | https://www.printables.com/model/591252 | data_0045.tar |
406000 | ONE PIECE light | <p>One piece light ! </p><p>supports:no</p><p>infill: </p><p>cups:15 %</p><p>lithophane: 99%</p><p> </p><p> </p><p>tips:</p><p>If you found <a href="https://3dprinting.stackexchange.com/questions/7989/difficult-to-remove-support-material">Difficult to remove support</a> i recommend this settings:&nb... | [
"light",
"lithophane",
"anime",
"one",
"piece",
"luffy"
] | 3D Printers > Accessories | [
"406000/images/image_1_compressed.jpg",
"406000/images/image_2_compressed.jpg",
"406000/images/image_3_compressed.jpg",
"406000/images/image_4_compressed.jpg",
"406000/images/image_5_compressed.jpg",
"406000/images/image_6_compressed.jpg",
"406000/images/image_7_compressed.jpg",
"406000/images/image_8... | [
"406000/stls/bottom_cup.stl",
"406000/stls/one piece.stl",
"406000/stls/roof_cup.stl"
] | CC-BY | https://www.printables.com/model/406000 | data_0045.tar |
413163 | Oneplus 8T/9R hard case | <p>use 0 bottom layers to choose an infill pattern as a design. makes it really unique. </p><p>in the picture I have used gyroid infill, feel free to experiment with others.</p><p>I also used fuzzy skin to give it a matte and more rugged look but be careful as that tends to mess with tolerance so use at your own r... | [
"case",
"phone",
"cover",
"plus",
"oneplus",
"one",
"mobile",
"phonecase",
"rugged",
"8t",
"9r"
] | Gadgets > Other Gadgets | [
"413163/images/image_1_compressed.jpg",
"413163/images/image_2_compressed.jpg",
"413163/images/image_3_compressed.jpg",
"413163/images/image_4_compressed.jpg",
"413163/images/image_5_compressed.jpg"
] | [
"413163/stls/8t case v2.stl",
"413163/stls/oneplus-8t-case. mk5.stl"
] | CC0 | https://www.printables.com/model/413163 | data_0045.tar |
1280663 | Oneplus Watch 3 charging stand | <p>I printed the stand with tree supports on the build plate only for the cleanest results. The base didn't need supports and slides over the bottom of the stand to keep the cable in place.</p> | [
"stand",
"charger",
"charging",
"watch",
"watchstand",
"oneplus"
] | Gadgets > Portable Devices | [
"1280663/images/image_1_compressed.jpg",
"1280663/images/image_2_compressed.jpg",
"1280663/images/image_3_compressed.jpg"
] | [
"1280663/stls/OnePlus Watch 3 Charger Stand.stl",
"1280663/stls/Watch 3 stand base.stl"
] | CC-BY | https://www.printables.com/model/1280663 | data_0045.tar |
93017 | onix - incense holder | <p>Incense for home<br>A minimalist and practical design.<br>Scalable model</p> | [
"thingiverse",
"incense",
"incenseholder"
] | Household > Home Decor | [
"93017/images/image_1_compressed.jpg",
"93017/images/image_2_compressed.jpg",
"93017/images/image_3_compressed.jpg",
"93017/images/image_4_compressed.jpg"
] | [
"93017/stls/inciensos.stl"
] | CC-BY | https://www.printables.com/model/93017 | data_0045.tar |
254147 | OPEL Astra K Armlehne Einsatz / OPEL - VAUXHALL Astra K Armrest shelf | <p>original files from: https://www.thingiverse.com/thing:3114789/files</p><p><i>I successfully split the original USB connection from the car to 2 USB sockets with these components →</i></p><p> </p><ul><li><a href="https://www.amazon.de/CABLESTOGO-Cables-81651-Hub-2-Port/dp/B007KYTI34/ref=sr_1_9?crid=208A9XV10BWF... | [
"shelf",
"opel",
"astra",
"armrest",
"armlehne"
] | Hobby & Makers > Automotive | [
"254147/images/image_1_compressed.jpg",
"254147/images/image_2_compressed.jpg",
"254147/images/image_3_compressed.jpg",
"254147/images/image_4_compressed.jpg"
] | [
"254147/stls/OPEL Astra K Armlehne Einsatz.stl"
] | CC-BY | https://www.printables.com/model/254147 | data_0045.tar |
845522 | Open 6x12, 6x17 and 6x24 Panoramic Camera Remix | <p>Build: <a href="https://ph.creery.org/posts/2024-04-15_3DPrinted612PanoCamera/3DPrinted612PanoCamera.html">https://ph.creery.org/posts/2024-04-15_3DPrinted612PanoCamera/3DPrinted612PanoCamera.html</a></p><p> </p><p> </p><p>You will still need the hardware from the original source: <a href="https://www.prin... | [
"camera",
"film",
"120mm",
"panoramic",
"35mm"
] | Gadgets > Photo & Video | [
"845522/images/image_1_compressed.jpg",
"845522/images/image_2_compressed.jpg",
"845522/images/image_3_compressed.jpg",
"845522/images/image_4_compressed.jpg",
"845522/images/image_5_compressed.jpg",
"845522/images/image_6_compressed.jpg",
"845522/images/image_7_compressed.jpg"
] | [
"845522/stls/Body612.stl",
"845522/stls/Cone_Parametric2_M65_612.stl",
"845522/stls/DarkScreen612.stl",
"845522/stls/FocusScreen_612.stl",
"845522/stls/FocusScreen_612_V2.stl",
"845522/stls/HotShoe_612.stl",
"845522/stls/Lid612.stl",
"845522/stls/WinderScrewWasher.stl"
] | CC0 | https://www.printables.com/model/845522 | data_0045.tar |
994840 | Open Bins for Packout | <h3>Open Bins for Milwaukee Packout<br> </h3><p>I created these bins primarily because I wanted something with a permissive license that has many options. There are 151 unique objects as of now. You are welcome to submit remixes if you have an idea.<br><br>The bins come with a blank label that you can use PrusaSli... | [
"stackable",
"customizable",
"label",
"divider",
"text",
"prusaslicer",
"smallpartsstorage",
"milwaukee",
"dividers",
"labels",
"emboss",
"smallpartsorganizer",
"bins",
"packout",
"milwaukeepackout",
"labelholder",
"screwstorage",
"packoutmods"
] | Hobby & Makers > Tools | [
"994840/images/image_1_compressed.jpg",
"994840/images/image_2_compressed.jpg",
"994840/images/image_3_compressed.jpg",
"994840/images/image_4_compressed.jpg",
"994840/images/image_5_compressed.jpg",
"994840/images/image_6_compressed.jpg"
] | [
"994840/stls/OpenBins_Label_Demo.stl",
"994840/stls/OpenBins_PO_8430_Double_FullHeight_Blank.stl",
"994840/stls/OpenBins_PO_8430_Double_FullHeight_Eighth.stl",
"994840/stls/OpenBins_PO_8430_Double_FullHeight_EighthTenth.stl",
"994840/stls/OpenBins_PO_8430_Double_FullHeight_Full.stl",
"994840/stls/OpenBins... | CC-BY | https://www.printables.com/model/994840 | data_0045.tar |
907434 | Open Stick Modular - Mini (OSM-Mini) Open Source 3D printable arcade stick | <p># 3D Printable Open Stick Modular - Mini (OSM-Mini)</p><p><br>---</p><p>## Attribution</p><p>The following text must be included in any distribution of derivatives of this board. All links must also be included.</p><p>Copyright 2024 [TheTrain](https://github.com/TheTrainGoes)</p><p>[Licensed under CC BY 4.0](https:/... | [
"arcade",
"stick",
"fightstick",
"arcadestick",
"gp2040ce"
] | Gadgets > Video Games | [
"907434/images/image_1_compressed.jpg",
"907434/images/image_10_compressed.jpg",
"907434/images/image_2_compressed.jpg",
"907434/images/image_3_compressed.jpg",
"907434/images/image_4_compressed.jpg",
"907434/images/image_5_compressed.jpg",
"907434/images/image_6_compressed.jpg",
"907434/images/image_... | [
"907434/stls/OSM-Mini - Back JLF Support Bracket.stl",
"907434/stls/OSM-Mini - Back Left Corner Bracket.stl",
"907434/stls/OSM-Mini - Back Plate.stl",
"907434/stls/OSM-Mini - Back Right Corner Bracket.stl",
"907434/stls/OSM-Mini - Bottom Foam.stl",
"907434/stls/OSM-Mini - Bottom Plate.stl",
"907434/stls... | CC-BY | https://www.printables.com/model/907434 | data_0045.tar |
99141 | Openbuilds inspired Corner Angle | <p>I modeled this openbuilds corner angle to print and mount 2020 Aluminium Extrusion on a 3d Printer.</p><p> </p><p>It is not intended for heavy things, just small an light things.</p><p> </p><p>Rounded the corners of to get it to print nicely.</p><p> </p><p>Print it as imported into your slicer</... | [
"2020extrusion",
"2020aluminum"
] | Hobby & Makers > Mechanical Parts | [
"99141/images/image_1_compressed.jpg",
"99141/images/image_2_compressed.jpg"
] | [
"99141/stls/Corner_Angel.stl"
] | CC-BY | https://www.printables.com/model/99141 | data_0045.tar |
1296555 | openGrid - Removable Screw Mount | <p>Beta, do your own testing before using. Some people are not able to free the print in place mechanism without rounding the coin slots. Remember to use ironing on top surfaces.</p><p>This is a removable screw mount with offset of 0mm, 2mm or 4mm. Fits screws with diameter of 4mm. Print in place with ironing on top su... | [
"mount",
"snap",
"screw",
"offset",
"locking",
"opengrid"
] | Hobby & Makers > Organizers | [
"1296555/images/image_1_compressed.jpg",
"1296555/images/image_2_compressed.jpg",
"1296555/images/image_3_compressed.jpg",
"1296555/images/image_4_compressed.jpg",
"1296555/images/image_5_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/1296555 | data_0045.tar |
1416870 | openGrid: Longer Minimal Hook | <p>This longer simple hook can be snapped onto the <a href="https://www.printables.com/model/1214361-opengrid-walldesk-mounting-framework-and-ecosystem/files">openGrid</a> tile rails and is pretty strong.</p> | [
"hook",
"snap",
"opengrid"
] | Hobby & Makers > Organizers | [
"1416870/images/image_1_compressed.jpg",
"1416870/images/image_2_compressed.jpg"
] | [
"1416870/stls/opengrid-longer-minimal-hook.stl"
] | CC-BY | https://www.printables.com/model/1416870 | data_0045.tar |
125226 | Opening Tool for e.g. Displays, Notebooks/Laptops Carparts, etc | <p>This is a simple little Opening Tool e.g. to:</p><ul><li>remove phonedisplays</li><li>open laptops/notebooks/tablets,…</li><li>open/remove car parts</li><li>remove E-cigarette-tank-glasses/atomizers</li><li>or other areas of application</li></ul><p>---------------------------------------------------------------</p><... | [
"tool",
"laptop",
"iphone",
"smartphone",
"tablet",
"removal",
"notebook",
"opening"
] | Hobby & Makers > Tools | [
"125226/images/image_1_compressed.jpg"
] | [
"125226/stls/Displaytool_slicer.stl"
] | LGPL | https://www.printables.com/model/125226 | data_0045.tar |
1483399 | OpenPrintTag - modular Spool Adapter Baseplate | <p>This is a simple baseplate onto which you can stick your OpenPrintTag. <br>The main idea is, that you can reuse this baseplate indefinitely. If you want to use it on a different spool, simply print the matching adapter. </p><p>To aid in positioning, there is also a little cylinder-jig included. Simply snap... | [
"spool",
"filament",
"modular",
"adapter",
"nfc",
"openprinttag"
] | 3D Printers > Accessories | [
"1483399/images/image_1_compressed.jpg",
"1483399/images/image_2_compressed.jpg"
] | [
"1483399/stls/OPT-Baseplate.stl",
"1483399/stls/OPT-Installation-Helper.stl"
] | CC0 | https://www.printables.com/model/1483399 | data_0045.tar |
1484203 | OpenPrintTag Polymaker Cardboard Spool Adapter | <p>This is a <strong>remix of the </strong><a href="https://www.printables.com/model/495778-polymaker-cardboard-spool-adapter"><strong>Polymaker Cardboard Spool Adapter</strong></a><strong> with a larger inner ring to fit an </strong><a href="https://openprinttag.org/"><strong>OpenPrintTag.org</strong></a><strong> NFC ... | [
"spool",
"polymaker",
"spooladapter",
"polymax",
"polyterra",
"6d6178",
"cardboardspool",
"polylite",
"fiberon",
"panchroma",
"openprinttag"
] | 3D Printers > Accessories | [
"1484203/images/image_1_compressed.jpg",
"1484203/images/image_2_compressed.jpg",
"1484203/images/image_3_compressed.jpg",
"1484203/images/image_4_compressed.jpg"
] | [
"1484203/stls/OpenPrintTag Polymaker Adapter - Inner Ring Only.stl",
"1484203/stls/OpenPrintTag Polymaker Adapter - Variant A.stl",
"1484203/stls/OpenPrintTag Polymaker Adapter - Variant B.stl"
] | GPL2.0 | https://www.printables.com/model/1484203 | data_0045.tar |
18016 | OpenRC 1:10 RC Truggy Rim for Monster Truck 10-Spoke Tires | <p>This is remix of original OpenRC 1:10 4WD Truggy Concept RC Car Rims.<br/>
I used HobbyKing tires:<br/>
<a href="https://hobbyking.com/en_us/hobbykingr-1-10-monster-truck-10-spoke-black-wheel-block-pattern-tire-12mm-hex-2pc.html">https://hobbyking.com/en\_us/hobbykingr-1-10-monster-truck-10-spoke-black-wheel-block-... | [
"wheel",
"openrc",
"thingiverse",
"rim",
"monstertruck",
"hobbyking",
"rims",
"rcwheels",
"truggy"
] | Hobby & Makers > RC & Robotics | [
"18016/images/image_1_compressed.jpg",
"18016/images/image_10_compressed.jpg",
"18016/images/image_11_compressed.jpg",
"18016/images/image_2_compressed.jpg",
"18016/images/image_3_compressed.jpg",
"18016/images/image_4_compressed.jpg",
"18016/images/image_5_compressed.jpg",
"18016/images/image_6_compr... | [
"18016/stls/truggy_rim.stl"
] | CC0 | https://www.printables.com/model/18016 | data_0045.tar |
169471 | OpenScad Dinosaur XING signs | <figure class="media"><oembed url="https://youtu.be/IwO5mkFPR4k"></oembed></figure> | [
"dinosaurs"
] | Art & Design > 2D Plates & Logos | [
"169471/images/image_1_compressed.jpg"
] | [
"169471/stls/dinosaur_01_crossing_sign.stl",
"169471/stls/dinosaur_02_crossing_sign.stl",
"169471/stls/dinosaur_03_crossing_sign.stl",
"169471/stls/dinosaur_04_crossing_sign.stl"
] | CC0 | https://www.printables.com/model/169471 | data_0045.tar |
345799 | Opossum miniature | <p>Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a href="https://www.patreon.com/mz4250">https://www.patreon.com/mz4250</a></p><p>Patrons have access to all my files in one place, a request board, as well ... | [
"mount",
"opossum"
] | Tabletop Miniatures > Characters & Monsters | [
"345799/images/image_1_compressed.jpg",
"345799/images/image_2_compressed.jpg"
] | [
"345799/stls/Opossum mount presupported.stl",
"345799/stls/Opossum mount.stl",
"345799/stls/Opossum presupported.stl",
"345799/stls/Opossum.stl"
] | CC-BY | https://www.printables.com/model/345799 | data_0045.tar |
1187134 | Optimized Storage for Harbor Freight US General Mini Toolbox | <p>30% less material, 30% more space. If you use these custom grids with the custom bins I have modified you will get maximum storage space out of your mini toolbox. Bins for top and middle drawer are 20mm in height. The bins for the bottom are 35mm in height. For the middle drawer you will need one bin that has the cu... | [
"harborfreight",
"gridfinity",
"usgeneral"
] | Hobby & Makers > Organizers | [
"1187134/images/image_1_compressed.jpg"
] | [
"1187134/stls/Double Wide.stl",
"1187134/stls/Gridfinity Bottom.stl",
"1187134/stls/Gridfinity Mid.stl",
"1187134/stls/Gridfinity Top - Top Split L.stl",
"1187134/stls/Gridfinity Top - Top Split R.stl",
"1187134/stls/Gridfinity Top.stl",
"1187134/stls/Quad Bin.stl",
"1187134/stls/SIngle Bin.stl",
"1... | CC0 | https://www.printables.com/model/1187134 | data_0045.tar |
474915 | Oral B electric tooth brush holder | <p>Introducing my Oral B electric toothbrush holder design. This is actually a remix, but unfortunately, I could not locate the original file.</p><p>This practical and convenient holder can accommodate 2 toothbrushes, floss, and dental cream. Keep your bathroom organized and tidy with this handy accessory. I designed i... | [
"toothbrush",
"oralb",
"oral",
"toothbrushholder"
] | Household > Bathroom | [
"474915/images/image_1_compressed.jpg",
"474915/images/image_2_compressed.jpg",
"474915/images/image_3_compressed.jpg",
"474915/images/image_4_compressed.jpg",
"474915/images/image_5_compressed.jpg",
"474915/images/image_6_compressed.jpg",
"474915/images/image_7_compressed.jpg",
"474915/images/image_8... | [
"474915/stls/Base_Facing_Back.stl",
"474915/stls/Base_Facing_Front.stl",
"474915/stls/Boby.stl",
"474915/stls/Oral_b_station_facing_back.stl",
"474915/stls/Oral_B_station_facing_front.stl"
] | CC-BY | https://www.printables.com/model/474915 | data_0045.tar |
266194 | Oral B Toothbrush Head Case with Holes | <p>Travel case for an Oral B toothbrush head. This is a remix of a model by Surfgeorge1 (https://www.thingiverse.com/thing:3192176), I just added holes to the case so that it doesn't get too humid inside.</p><p>I printed it in magicPLA Watermelon for a cool color effect. It looks nice but the slicing could definitely b... | [
"toothbrush",
"oralb",
"toothbrushholder",
"travelcase"
] | Household > Bathroom | [
"266194/images/image_1_compressed.jpg",
"266194/images/image_2_compressed.jpg",
"266194/images/image_3_compressed.jpg"
] | [
"266194/stls/Base-Screw.stl",
"266194/stls/Shell-Screw-wHoles.stl"
] | CC-BY | https://www.printables.com/model/266194 | data_0045.tar |
74171 | Oral B Toothbrush Holder | <p>It was my first print with the filament which was given with Ender 3 V2 printer. The quality was very satisfying for the first printing.</p> | [
"bathroom",
"pla",
"toothbrush",
"oralb",
"accesories"
] | Household > Bathroom | [
"74171/images/image_1_compressed.jpg",
"74171/images/image_2_compressed.jpg"
] | [
"74171/stls/Oral-B for 2.stl"
] | CC0 | https://www.printables.com/model/74171 | data_0045.tar |
77614 | Oral B Toothbrush Travel Case | <p>4-29-2025 – I am uploading a new model v2.6 of this Oral B <i><strong>replaceable battery</strong></i>-operated toothbrush handle case. This case solves several problems - the lid now snaps together, the lid fits and stores under the base (when traveling the counter space is very limited), better fit of the battery-... | [
"toothbrush",
"oralb",
"oral",
"thingiverse",
"toothbrushholder"
] | Household > Other House Equipment | [
"77614/images/image_1_compressed.jpg",
"77614/images/image_2_compressed.jpg",
"77614/images/image_3_compressed.jpg",
"77614/images/image_4_compressed.jpg",
"77614/images/image_5_compressed.jpg",
"77614/images/image_6_compressed.jpg",
"77614/images/image_7_compressed.jpg"
] | [
"77614/stls/LID v 2.6.stl",
"77614/stls/LID v2.52.stl",
"77614/stls/LOWER BRUSH CASE v2.52.stl",
"77614/stls/LOWER BRUSH CASE v2.6.stl"
] | CC-BY | https://www.printables.com/model/77614 | data_0045.tar |
485917 | Oral B / Braun / Philips electric tooth brush holder | Electric tooth brush holder, one for charging and the other for storage. | Download free 3D printable STL models | [
"toothbrush",
"oralb",
"philips",
"braun",
"toothbrushholder"
] | Household > Bathroom | [
"485917/images/image_1_compressed.jpg",
"485917/images/image_2_compressed.jpg"
] | [
"485917/stls/Toothbrush_holder.stl"
] | CC0 | https://www.printables.com/model/485917 | data_0045.tar |
517252 | oral-b | A travelcase for Oral-b atachments | Download free 3D printable STL models | [
"oralb",
"oralbraun"
] | Household > Bathroom | [
"517252/images/image_1_compressed.jpg"
] | [
"517252/stls/Travelcase (1).stl"
] | CC-BY | https://www.printables.com/model/517252 | data_0045.tar |
226915 | Oral-B Double Stand | <p>Habe einen Doppel Zahnbürstenhalter für Oral-B entworfen da mir die meinsten angebotenen hier nicht gefallen haben oder nicht in der Version wie ich sie wollte gab.</p>
<p>Vielleicht findet mein Design ja noch wer anders gut.</p>
<p>Hab auch gleich zwei Versionen erstellt, für ein oder zwei Ladegeräte.</p>
Categor... | [
"mk3",
"toothbrush",
"prusai3mk3",
"oralb",
"oral",
"single",
"double",
"thingiverse",
"toothbrushholder",
"halter",
"zahnbuerste"
] | Household > Bathroom | [
"226915/images/image_1_compressed.jpg",
"226915/images/image_2_compressed.jpg",
"226915/images/image_3_compressed.jpg",
"226915/images/image_4_compressed.jpg",
"226915/images/image_5_compressed.jpg"
] | [
"226915/stls/double_loader.stl",
"226915/stls/single_loader.stl"
] | CC-BY | https://www.printables.com/model/226915 | data_0045.tar |
1134398 | Oral-B iO Brush Stand / Zahnbürstenhalter | <p>You can print it easily with no supports.</p><p>I've added a new version 2, where the angle is better and the brush holds a bit tighter.</p> | [
"stand",
"head",
"brush",
"toothbrush",
"tooth",
"oralb",
"toothbrushholder"
] | Household > Bathroom | [
"1134398/images/image_1_compressed.jpg",
"1134398/images/image_2_compressed.jpg",
"1134398/images/image_3_compressed.jpg"
] | [
"1134398/stls/brush stand oral-b io version 2.stl",
"1134398/stls/brush stand oral-b io.stl"
] | CC0 | https://www.printables.com/model/1134398 | data_0045.tar |
167770 | Oral-B iO Series 9 Stand | <p>Oral-B iO Series 9 stand for charging base and single head</p><p>Category: Bathroom</p><p>Update: Rev1 file has a larger and more vertical brush head post as requested. I still prefer original, thinking maybe a looser fit enables faster drying. Also uploaded a version with no brush holder.</p><p> </p> | [
"stand",
"head",
"toothbrush",
"oralb",
"oral",
"single",
"thingiverse"
] | Household > Bathroom | [
"167770/images/image_1_compressed.jpg",
"167770/images/image_2_compressed.jpg"
] | [
"167770/stls/oral b stand helix.stl",
"167770/stls/oral b stand no brush.stl"
] | CC-BY | https://www.printables.com/model/167770 | data_0045.tar |
494009 | Oral-B toothbrush holder / stojak na szczoteczki oral-b | Stojak na końcówki do szczoteczki oral-b | Download free 3D printable STL models | [
"holder",
"toothbrush",
"oralb",
"oral",
"toothbrushholder",
"stojak",
"podstawka"
] | Household > Bathroom | [
"494009/images/image_1_compressed.jpg",
"494009/images/image_2_compressed.jpg",
"494009/images/image_3_compressed.jpg",
"494009/images/image_4_compressed.jpg"
] | [
"494009/stls/oral-b holder.stl"
] | CC-BY | https://www.printables.com/model/494009 | data_0045.tar |
268394 | Orange Pi zero 2 case for I3MK3S | <p>Case for Orange Pi Zero 2 with expansion board and cooling with Noctua NF-A4x10 5V</p><p>I3MK3S frame mount included</p><p>Bill of materials:</p><p>Heatsink for orange Pi</p><p>M4 nuts- 4pcs - fixing noctua case</p><p>M4x20 screw - 4pcs - fixing noctua case</p><p>BLS connector - socket 2x1 - 1pcs - for connection no... | [
"case",
"prusai3mk3s",
"orangepizero2"
] | Hobby & Makers > Electronics | [
"268394/images/image_1_compressed.jpg",
"268394/images/image_2_compressed.jpg",
"268394/images/image_3_compressed.jpg",
"268394/images/image_4_compressed.jpg"
] | [
"268394/stls/Antena tale.stl",
"268394/stls/Case body.stl",
"268394/stls/Case lid.stl",
"268394/stls/Frame mount.stl",
"268394/stls/Noctua case.stl"
] | GPL3.0 | https://www.printables.com/model/268394 | data_0045.tar |
613046 | Orange pi zero 2w case | <p>This is a pi zero 2w case </p><p>Easy print and customizable</p><h3><strong>Print instructions</strong></h3><p><strong>Recommended Print Settings:</strong><br>Layer Height: 0.20mm</p><p>25% honeycomb infill an 4 walls if you use zero bottom and top layer</p><p><strong>Required hardware:</strong><br>4x 10mm M2 s... | [
"case",
"pi",
"orangepi",
"orangepicase"
] | Gadgets > Computers | [
"613046/images/image_1_compressed.jpg",
"613046/images/image_2_compressed.jpg"
] | [
"613046/stls/bottom.stl",
"613046/stls/top_full.stl",
"613046/stls/top_open2.stl",
"613046/stls/top_opened.stl"
] | GPL2.0 | https://www.printables.com/model/613046 | data_0045.tar |
23758 | Orc Female Warrior | <p>Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a href="https://www.patreon.com/mz4250">https://www.patreon.com/mz4250</a></p>
<p>Patrons have access to all my files in one place, a request board, as well ... | [
"female",
"orc"
] | Toys & Games > Board Games | [
"23758/images/image_1_compressed.jpg"
] | [
"23758/stls/orc-female-warrior.stl"
] | CC-BY | https://www.printables.com/model/23758 | data_0045.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.