model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
173851 | Orchid vase | <p>I remixed the pot found at <a href="https://www.thingiverse.com/thing:2181381">https://www.thingiverse.com/thing:2181381</a> into an orchid pot by utilizing the hole generation technique found at <a href="https://www.thingiverse.com/thing:607195">https://www.thingiverse.com/thing:607195</a> and applying it to the fo... | [
"flowerpot",
"orchid"
] | Household > Outdoor & Garden | [
"173851/images/image_1_compressed.jpg"
] | [
"173851/stls/OrchidifiedPot_131mmTall.stl"
] | CC-BY | https://www.printables.com/model/173851 | data_0045.tar |
308454 | Ordinary 6 sided dice | <p>I reccomend printing it one the “1” side. ( Need to comfirm that this is the best orientation)</p><p><strong>NOTE:</strong> When scaling this model down printing on the “6” side seems to give better results</p><p><br><br>If you want it to look better, you could for example print it in white filament and paint ... | [
"fast",
"fusion360",
"boardgames",
"dice",
"quick",
"useful"
] | Toys & Games > Board Games | [
"308454/images/image_1_compressed.jpg"
] | [
"308454/stls/Ordinary_6_sided_dice.stl"
] | CC-BY | https://www.printables.com/model/308454 | data_0045.tar |
487104 | Organic Egg Cup | <p>Print with 2 perimeters, 0% infill, no top and bottom layers. </p><p>I used the following settings for the supports:</p><figure class="image"><img src="https://media.printables.com/media/prints/487104/rich_content/a9632d68-760a-4979-af6e-8bd0d9f32949/screenshot-from-2023-05-21-21-59-04.png#%7B%22uuid%22%3A%226b... | [
"eggcup"
] | Household > Kitchen | [
"487104/images/image_1_compressed.jpg",
"487104/images/image_2_compressed.jpg"
] | [
"487104/stls/organic_egg_stand.stl"
] | CC-BY | https://www.printables.com/model/487104 | data_0045.tar |
289830 | Organic Jam Jar & Lid | <p>A model of a jar of "<a href="https://www.costco.com/kirkland-signature-organic-strawberry-spread%2C-42-oz.product.100115267.html">Kirkland Organic Strawberry Spread</a>" with its lid. This model is intended as a starting point for upcycling projects. The FreeCAD file contains a spreadsheet with most of the measurem... | [
"reuse",
"lid",
"upcycling",
"cap",
"jar",
"costco",
"jam",
"kirkland"
] | Hobby & Makers > Other Ideas | [
"289830/images/image_1_compressed.jpg",
"289830/images/image_2_compressed.jpg",
"289830/images/image_3_compressed.jpg",
"289830/images/image_4_compressed.jpg",
"289830/images/image_5_compressed.jpg"
] | [
"289830/stls/organic-jam-jar-lid.stl",
"289830/stls/organic-jam-jar-w-lid.stl"
] | CC0 | https://www.printables.com/model/289830 | data_0045.tar |
177413 | organizér do hry "Ztracený Ostrov Arnak" (Lost Isle of Arnak) | <p>CZ: Není můj design! Jediná úprava je moje a to “Player_Board_A”, kde jsem zvětšil díru na karty a odebral tamtéž spodní zábranu, aby se karty dali lehce vytahovat a vešli se dovnitř ve fólii</p><p> </p><p>EN: Not my design! I've remixed only the tile named “Player_Board_A” where made the hole for cards and dis... | [
"organizer",
"arnak"
] | Toys & Games > Board Games | [
"177413/images/image_1_compressed.jpg",
"177413/images/image_10_compressed.jpg",
"177413/images/image_11_compressed.jpg",
"177413/images/image_12_compressed.jpg",
"177413/images/image_13_compressed.jpg",
"177413/images/image_14_compressed.jpg",
"177413/images/image_15_compressed.jpg",
"177413/images/i... | [
"177413/stls/Arnak_-_arrowhead_box_holder.stl",
"177413/stls/Arnak_-_arrowhead_box_holder_lid.stl",
"177413/stls/Arnak_-_Artifact_card_holder.stl",
"177413/stls/Arnak_-_assistant_tile_design.stl",
"177413/stls/Arnak_-_assistant_tile_design_box.stl",
"177413/stls/Arnak_-_coin_holder_box.stl",
"177413/stl... | CC0 | https://www.printables.com/model/177413 | data_0045.tar |
375709 | Orginal Prusa Enclosure Webcam C920 Camera Mount | <p>A simple camera mount for the logitech C920 for the Orginal Prusa Enclosure. </p><p>Mount on the internal enclosure upright using M3 x 8mm screw. </p><p>Printed in PLA with 20% infill.</p><p>V1.1 incresed the size of the standoff</p><p>https://www.tinkercad.com/things/d5DjLY3VsUi</p><p> </p><p> <... | [
"enclosure",
"cameramount",
"webcam",
"c920",
"webcammount",
"originalprusaenclosure"
] | 3D Printers > Accessories | [
"375709/images/image_1_compressed.jpg",
"375709/images/image_2_compressed.jpg",
"375709/images/image_3_compressed.jpg"
] | [
"375709/stls/C920 Camera Mount Prusa Orginal Enclousure Camera Mount V1.1.stl"
] | GPL2.0 | https://www.printables.com/model/375709 | data_0045.tar |
561099 | Original Prusa Enclosure - Middle Feet for patio slab/paver 'mod' | <p>My Original Prusa Enclosure had a bit of echo when printing so I wanted to try the concrete patio slab/paver ‘mod’ to quiet things down and it seems to help.</p><p>I already had a 45x45cm concrete patio slab/paver that I was using before I got the enclosure.</p><p>The weight of the Prusa printer and slab/paver would... | [
"feet",
"concrete",
"patio",
"paver"
] | 3D Printers > Accessories | [
"561099/images/image_1_compressed.jpg",
"561099/images/image_2_compressed.jpg",
"561099/images/image_3_compressed.jpg"
] | [
"561099/stls/Prusa Enclosure Middle Feet x 4.stl",
"561099/stls/Prusa Enclosure Middle Feet.stl"
] | CC-BY | https://www.printables.com/model/561099 | data_0045.tar |
893218 | Original Prusa Enclosure - Slider Lock Latch - Optimised remixed with nut | <p>Award winning Slider Lock Latch by @MichaelQ was a necessary upgrade to replace the original flimsy locks for the enclosure hinged top lid mod. @DavidD made a slick optimized remix that simplified the print. I printed a set and it worked great, but I found over time the plastic threads stripped and became loose so t... | [
"prusa",
"enclosure",
"lock",
"latch",
"prusaenclosure"
] | 3D Printers > Prusa Parts & Upgrades | [
"893218/images/image_1_compressed.jpg",
"893218/images/image_2_compressed.jpg"
] | [
"893218/stls/imrpoved slider lock - nut remix.stl",
"893218/stls/Slide Latch Lock - Optimised print_Case - nut remix X01.stl",
"893218/stls/Slide Latch Lock - Optimised print_Cover - nut remix X01.stl"
] | GPL2.0 | https://www.printables.com/model/893218 | data_0045.tar |
414950 | original prusa enclouser silica gel container | <p>i made two silica gel beads container 1st one will fit on the side panels and the 2nd one will fin on the corners. i find it useful to keep filament dry when you are not printing.</p><p>you need 1 m3 hex nut and 1 m3 10mm screw the container is designed to fit on on one of the three threaded holes on the enclouser p... | [
"desiccant",
"enclousure",
"silicagelcontainer"
] | 3D Printers > Accessories | [
"414950/images/image_1_compressed.jpg",
"414950/images/image_10_compressed.jpg",
"414950/images/image_2_compressed.jpg",
"414950/images/image_3_compressed.jpg",
"414950/images/image_4_compressed.jpg",
"414950/images/image_5_compressed.jpg",
"414950/images/image_6_compressed.jpg",
"414950/images/image_... | [
"414950/stls/original prusa enclouser silica gel corner container.stl",
"414950/stls/original prusa enclousre silica-descicant box.stl"
] | CC0 | https://www.printables.com/model/414950 | data_0045.tar |
362041 | Original Prusa Enlosure (OPE) - Raspberry Pi Mount with 7" Display | <p>If you have an Original Prusa Enclosure and you want to use a Raspberry Pi 3/4 and an original 7" Touch-Display with your MK3s+.</p><p>You need the following:</p><ul><li>4x M3 x 18mm Allen screw </li><li>4x M3 x 8mm Allen screw </li><li>2x M3 x 15mm Allen screw </li><li>6x M3 nut</li><li>1x M6 x 35mm ... | [
"mk3s",
"raspberrypicase",
"raspberrypi4",
"prusaenclosure",
"raspberrypi3",
"originalprusaenclosure"
] | 3D Printers > Prusa Parts & Upgrades | [
"362041/images/image_1_compressed.jpg",
"362041/images/image_2_compressed.jpg",
"362041/images/image_3_compressed.jpg",
"362041/images/image_4_compressed.jpg",
"362041/images/image_5_compressed.jpg",
"362041/images/image_6_compressed.jpg",
"362041/images/image_7_compressed.jpg",
"362041/images/image_8... | [
"362041/stls/Ball_Joint_V3-Ball.stl",
"362041/stls/Ball_Joint_V3-Bolt.stl",
"362041/stls/Ball_Joint_V3-Nut.stl",
"362041/stls/Display_V3-Bottom.stl",
"362041/stls/Display_V3-Frame.stl",
"362041/stls/Display_V8_Cover.stl",
"362041/stls/Enclosure_Mount_Middle_V2.stl",
"362041/stls/Enclosure_Mount_Screw_... | CC0 | https://www.printables.com/model/362041 | data_0045.tar |
120596 | Original Prusa Mate - The Prusa Mini Add On | <p><strong>Update - 20/05/2022</strong></p><p>Some people have had issues with the tolerances with the legs fitting onto the extrusions.</p><p>Due to this I've created a new model folder below titled <strong>‘Tolerance - Less Tight Legs -0.15mm’</strong></p><p>And I've amended the STL files so the leg joints that fit o... | [
"prusa",
"printer",
"cartoon",
"prusamini",
"pixar",
"originalprusamini",
"prusamate",
"printatoon",
"originalprusamate"
] | 3D Printers > Prusa Parts & Upgrades | [
"120596/images/image_1_compressed.jpg",
"120596/images/image_2_compressed.jpg",
"120596/images/image_3_compressed.jpg",
"120596/images/image_4_compressed.jpg",
"120596/images/image_5_compressed.jpg",
"120596/images/image_6_compressed.jpg"
] | [
"120596/stls/Back Left - Black Part - Supports On Build Plate Only.stl",
"120596/stls/Back Left - Orange to White - CC - 49.70.stl",
"120596/stls/Back Left - White Parts - Supports On Build Plate Only.stl",
"120596/stls/Back Right - Black - Leg.stl",
"120596/stls/Back Right - Orange to White - CC - 49.60 - ... | GPL2.0 | https://www.printables.com/model/120596 | data_0045.tar |
135 | Original Prusa MK2.4 Extruder | <p>This is a remix of Vecko's amazing MK3 extruder and x carriage design that is fully compatible with the MK2/S.</p>
<p>You won't need to purchase any additional hardware apart from the noctua fan and maybe an assortment of M3 screws and nuts. It has been designed to work with the MK2's hobbed pulley, idler bearing, a... | [
"upgrade",
"prusa",
"extruder",
"mk2",
"original"
] | 3D Printers > Prusa Parts & Upgrades | [
"135/images/image_1_compressed.jpg",
"135/images/image_10_compressed.jpg",
"135/images/image_11_compressed.jpg",
"135/images/image_2_compressed.jpg",
"135/images/image_3_compressed.jpg",
"135/images/image_4_compressed.jpg",
"135/images/image_5_compressed.jpg",
"135/images/image_6_compressed.jpg",
"1... | [
"135/stls/extruder-body.stl",
"135/stls/extruder-cover.stl",
"135/stls/extruder-idler-pin.stl",
"135/stls/extruder-idler.stl",
"135/stls/fan-holder.stl",
"135/stls/fan-nozzle.stl",
"135/stls/filament-sensor-cover.stl",
"135/stls/x-carriage-back.stl",
"135/stls/x-carriage-cable-holder.stl",
"135/st... | CC-BY | https://www.printables.com/model/135 | data_0045.tar |
1165177 | Original Xbox HDD/SSD Caddy | <p>This is a custom HDD caddy for the original Xbox. Transferring files over FTP is capped at 10MB/s, which can be painfully slow. I wanted a faster way to move files by taking the drive out and connecting it directly to my PC.</p><p>The problem is, removing the drive the normal way is a hassle. You have to take the sy... | [
"original",
"hdd",
"drive",
"harddrive",
"ssd",
"caddy",
"xbox",
"xboxone",
"hddadapter",
"ssdmount",
"hddcaddy",
"ssdadapter",
"originalxbox",
"ssdholder",
"eggsbox",
"og",
"ssdcaddy",
"ogxbox",
"hddholder",
"youhaveuno",
"xboxoriginal",
"xboxog",
"onexbox"
] | Hobby & Makers > Electronics | [
"1165177/images/image_1_compressed.jpg",
"1165177/images/image_2_compressed.jpg",
"1165177/images/image_3_compressed.jpg",
"1165177/images/image_4_compressed.jpg"
] | [
"1165177/stls/Bezel Holder.stl",
"1165177/stls/Bottom Back Support.stl",
"1165177/stls/Bottom SATA Holder.stl",
"1165177/stls/Drive Sled.stl",
"1165177/stls/Drive Tray.stl",
"1165177/stls/Front Left Pillar.stl",
"1165177/stls/Front Support Washers.stl",
"1165177/stls/Front Support.stl",
"1165177/stl... | CC-BY | https://www.printables.com/model/1165177 | data_0045.tar |
1556033 | Ork válečník World of Warcraft | <p>Tento detailní model inspirovaný orky ze světa Warcraftu přináší do vaší sbírky pořádnou dávku brutální síly a fantasy atmosféry. Masivní postava s výraznou muskulaturou, těžkým brněním a ikonickým orčím výrazem působí jako připravená vyrazit do boje. Model je navržen s důrazem na ostré detaily, textury kůže, pásů, ... | [] | Toys & Games > Action Figures & Statues | [
"1556033/images/image_1_compressed.jpg",
"1556033/images/image_2_compressed.jpg",
"1556033/images/image_3_compressed.jpg",
"1556033/images/image_4_compressed.jpg"
] | [
"1556033/stls/Ork.stl"
] | CC0 | https://www.printables.com/model/1556033 | data_0045.tar |
1066582 | Ornament Star (Flat Print) | <p> </p><p>With a 0.6 nozzle, this star prints up in 9 minutes and only 4g of filament.</p><p>Final assembled star is around 8cm in size.</p><p> </p><p>No layer lines! </p><ul><li>This star prints flat to the surface. Keep the nice finish of the bottom of the print to the outside and it looks perfect.</l... | [
"christmas",
"space",
"star",
"newyear",
"winter",
"hanging",
"ornament",
"tree",
"sky"
] | Seasonal designs > Winter & Christmas & New Year's | [
"1066582/images/image_1_compressed.jpg",
"1066582/images/image_2_compressed.jpg",
"1066582/images/image_3_compressed.jpg",
"1066582/images/image_4_compressed.jpg",
"1066582/images/image_5_compressed.jpg"
] | [
"1066582/stls/Star.stl",
"1066582/stls/Star_hanging.stl"
] | CC-BY | https://www.printables.com/model/1066582 | data_0045.tar |
602616 | ORP Arduino Mega 2560 Holder | <p>A holder/mount for an Arduino Mega 2560 for ORP compatible plates.</p><p> </p><p><strong>About ORP</strong></p><p>ORP (Open Robotic Platform) is an open-source project for developing reusable and user-friendly components for use in hobbyist robotics. By following a set a design rules, parts can be used together... | [
"holder",
"arduino",
"mega",
"2560",
"orp"
] | Hobby & Makers > Electronics | [
"602616/images/image_1_compressed.jpg"
] | [
"602616/stls/ORP Arduino Mega 2560 Holder.stl"
] | CC0 | https://www.printables.com/model/602616 | data_0045.tar |
226674 | Orthodontic Tooth Aligner Removal Hooks | <p>Version 2 is stiffer and works a bit better!</p><p>If you have Invisalign, Smile Direct, or other aligners, it can be difficult to remove them sometimes -- especially if you have attachments that increase the tension in the aligners and create undercuts. Removing these incorrectly can more easily snap off the attach... | [
"orthodontics"
] | Healthcare > Home Medical Tools | [
"226674/images/image_1_compressed.jpg"
] | [
"226674/stls/Aligner Hook 2.stl",
"226674/stls/Aligner Hook.stl"
] | CC0 | https://www.printables.com/model/226674 | data_0045.tar |
89993 | Orville Remixed |
<p>Update: If you're having trouble printing both back halves together, I've uploaded them as separate parts so they can print separately.</p>
<p>When printing the back half, I suggest separating out the parts into objects and setting the infill on the supports to 0%. (Slic3r and Simplify 3d allow this) This should ... | [
"thingiverse"
] | Art & Design > 2D Plates & Logos | [
"89993/images/image_1_compressed.jpg",
"89993/images/image_10_compressed.jpg",
"89993/images/image_11_compressed.jpg",
"89993/images/image_2_compressed.jpg",
"89993/images/image_3_compressed.jpg",
"89993/images/image_4_compressed.jpg",
"89993/images/image_5_compressed.jpg",
"89993/images/image_6_compr... | [
"89993/stls/Orville_Back_Half.stl",
"89993/stls/Orville_Back_Half_Large_Arc_V2.stl",
"89993/stls/Orville_Back_Half_Small_Arc.stl",
"89993/stls/orville_back_half_V4_No_Supports.stl",
"89993/stls/orville_back_half_V4_plus.stl",
"89993/stls/orville_front_half_V2.stl",
"89993/stls/Orville_Hollowed.stl"
] | CC-BY | https://www.printables.com/model/89993 | data_0045.tar |
318554 | OSVAC Male Male Adaptor | <p>Hello, please leave a like if you think this Thing is usefull.</p>
<p>Just an OSVAC Male Male Adaptor ...</p>
Category: Parts | [
"thingiverse"
] | Hobby & Makers > Tools | [
"318554/images/image_1_compressed.jpg"
] | [
"318554/stls/OSVAC_Gender_Changer_V1.stl",
"318554/stls/OSVAC_Gender_Changer_V2.stl"
] | CC-BY | https://www.printables.com/model/318554 | data_0045.tar |
408207 | Oui Yogurt Cap | <p>Oui Yogurt Cap </p><p>Recycle your Glass Oui Yogurt Jars and use this lid. </p><p>Very tight </p><p>With or without Musgrave texture on lid walls.</p> | [] | Household > Kitchen | [
"408207/images/image_1_compressed.jpg"
] | [
"408207/stls/ouicap.stl",
"408207/stls/ouicapmusk.stl"
] | CC0 | https://www.printables.com/model/408207 | data_0045.tar |
167778 | Out of Marbles Ball Storage Base for Twist Lock Trick Cylinder | <p>Update: Added 50 marble version STL and <a href="https://www.printables.com/model/208859-twist-lock-trick-cylinder-hidden-latch-low-profile">link to new low profile lid that is 7mm thinner then the original storage top</a>.</p><p>This is a remix of the Out of Marbles ball storage tray using the <a href="https://www.... | [] | Toys & Games > Other Toys & Games | [
"167778/images/image_1_compressed.jpg",
"167778/images/image_2_compressed.jpg",
"167778/images/image_3_compressed.jpg",
"167778/images/image_4_compressed.jpg",
"167778/images/image_5_compressed.jpg",
"167778/images/image_6_compressed.jpg"
] | [
"167778/stls/MarbleBaseHiddenCylinder50.stl",
"167778/stls/MarbleBaseTwistLockTray.stl"
] | CC-BY | https://www.printables.com/model/167778 | data_0045.tar |
173133 | Outer Wilds Patch | <h3>Outer Wilds Patch</h3><ul><li>Patch-logo from the video game Outer Wilds</li><li>Printed at .1mm layer height, ironing, with color change at each top layer</li><li>You may have better results with a smaller nozzle</li><li>.3mf/.stl included</li><li>Prusa MK3S .gcode included</li></ul> | [
"space",
"rocket",
"art",
"patch",
"2dart",
"layerheigthchange",
"outerwild",
"outerwilds"
] | Art & Design > Other Art & Designs | [
"173133/images/image_1_compressed.jpg",
"173133/images/image_2_compressed.jpg"
] | [
"173133/stls/OuterWilds Patch.stl"
] | CC-BY | https://www.printables.com/model/173133 | data_0045.tar |
917194 | Oven-Light-Glass-Tool | <p>Unable to get the Glass cover off when i want to change my oven light i try to make a tool for it.</p>
<p>Its a NEFF Oven but i am sure it will fit to other branches too.</p>
<p>Just use a screewdriver, or a ruler and it will work easily.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>TEVO</p>... | [
"thingiverse"
] | Hobby & Makers > Tools | [
"917194/images/image_1_compressed.jpg",
"917194/images/image_2_compressed.jpg"
] | [
"917194/stls/Ofenlichttool_v1.stl"
] | CC-BY | https://www.printables.com/model/917194 | data_0045.tar |
167055 | Over the Garden Wall Lantern | <p>This is a present that I made for my brother-in-law, who is a huge Over the Garden Wall fan. He picked 4 images that he liked from the show, and I was able to adjust them to fit inside of a lantern, replacing the glass panes. Tissue paper was glued to the back of the prints, making the light from inside the lantern ... | [
"light",
"cartoon",
"art",
"lantern",
"lighting",
"craft"
] | Art & Design > Other Art & Designs | [
"167055/images/image_1_compressed.jpg",
"167055/images/image_2_compressed.jpg",
"167055/images/image_3_compressed.jpg",
"167055/images/image_4_compressed.jpg",
"167055/images/image_5_compressed.jpg",
"167055/images/image_6_compressed.jpg",
"167055/images/image_7_compressed.jpg",
"167055/images/image_8... | [
"167055/stls/OTGW_1.stl",
"167055/stls/OTGW_2.stl",
"167055/stls/OTGW_3.stl",
"167055/stls/OTGW_4.stl"
] | CC-BY | https://www.printables.com/model/167055 | data_0045.tar |
125110 | Overthink sign | <p>There are two versions of the color print. One with letters raised, one with letters recessed. The MMU version is printed face down so there is no need to use ironing. The color print versions would benefit from ironing. The extent of ironing - at the cost of time - can be adjusted. The pictures show the color print... | [] | Art & Design > 2D Plates & Logos | [
"125110/images/image_1_compressed.jpg",
"125110/images/image_2_compressed.jpg"
] | [
"125110/stls/overthink - background MMU.stl",
"125110/stls/overthink - color print - ironing topmost - letters raised.stl",
"125110/stls/overthink - color print - no ironing - letters recessed.stl",
"125110/stls/overthink - face down - MMU.stl",
"125110/stls/overthink - words MMU.stl"
] | CC-BY | https://www.printables.com/model/125110 | data_0045.tar |
304543 | Overture Paper Spool Inserts | <p>Overture Paper Spool Inserts are used to keep the paper dust that is created when the roll turns. They are small and easy to fit. When printing I made mine at 101.75 scale and that was the best size for me. I would not suggest below 101 or above 102 scale. If you like a press fit 102 is that size. The STL is at 100 ... | [] | 3D Printers > Other Printer Parts & Upgrades | [
"304543/images/image_1_compressed.jpg"
] | [
"304543/stls/OverturePETGSpoolInserts v1-10175-2p.stl",
"304543/stls/OverturePETGSpoolInserts v1.stl"
] | CC0 | https://www.printables.com/model/304543 | data_0045.tar |
1316820 | Owl Statue | <p>Owl Statue</p> | [
"decoration",
"bird",
"statue",
"animal",
"figurine",
"sculpture",
"zoo",
"biomorph"
] | Toys & Games > Action Figures & Statues | [
"1316820/images/image_1_compressed.jpg"
] | [
"1316820/stls/owl.stl"
] | CC-BY | https://www.printables.com/model/1316820 | data_0045.tar |
96436 | Owlbears Running | <p>Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250</p><p>Patrons have access to all my files in one place, a request board, as well as commercial and commission options! Come che... | [
"owlbear"
] | Toys & Games > Board Games | [
"96436/images/image_1_compressed.jpg",
"96436/images/image_2_compressed.jpg"
] | [
"96436/stls/large creature size marker.stl",
"96436/stls/Owlbears Running 1 presupported.stl",
"96436/stls/Owlbears Running 1.stl",
"96436/stls/Owlbears Running 2 presupported.stl",
"96436/stls/Owlbears Running 2.stl",
"96436/stls/Owlbears Running 3 presupported.stl",
"96436/stls/Owlbears Running 3.stl"... | CC-BY | https://www.printables.com/model/96436 | data_0045.tar |
1227934 | Oxford Heated Grips Controller Bracket | <p>A very slim support for the remote/controller of Oxford heated grips/handle bars for motorcycle, ATV, snowmobile etc.</p><p>Fastened with 2 zip-ties.</p><p>Printed and fitted perfectly on my Husquarna (KTM) Svartpilen 401 (2023); its tight and you need to start screwing etc before tightening down the ties.</p><p>mad... | [] | Hobby & Makers > Automotive | [
"1227934/images/image_1_compressed.jpg",
"1227934/images/image_2_compressed.jpg",
"1227934/images/image_3_compressed.jpg",
"1227934/images/image_4_compressed.jpg"
] | [
"1227934/stls/OxfordHolder.stl"
] | CC-BY | https://www.printables.com/model/1227934 | data_0045.tar |
31193 | Ozobot Evo Pen Holder | <p>A pen holder for the Ozobot Evo, which has a different shape than previous Ozobot models. This design holds a thin Crayola "fine line" marker really well, and probably holds other slim markers/pens. The marker is meant to be loose in the holder so it can follow any unevenness on the print surface.</p>
<h3>Print ins... | [
"ozobot",
"evo"
] | Learning > Other 3D Objects for Learning | [
"31193/images/image_1_compressed.jpg"
] | [
"31193/stls/ozobot_evo_pen_holder.stl"
] | CC-BY | https://www.printables.com/model/31193 | data_0045.tar |
539017 | P1P Bottom Plate Hole Cover | <p>Designed this because I had some filament stuck in those 4 tiny holes located at each corner at the base of the printer. </p><p> </p><p>Best printed higher quality for good tolerances</p><p> </p><p>The cover is designed to be removed by just a fingernail. Should fall into place with ease.</p><p> ... | [
"cover",
"hole",
"bambulab",
"p1p"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"539017/images/image_1_compressed.jpg",
"539017/images/image_2_compressed.jpg",
"539017/images/image_3_compressed.jpg"
] | [
"539017/stls/HoleCoverV3.stl"
] | CC0 | https://www.printables.com/model/539017 | data_0045.tar |
529338 | P1P Faceplate Cold Shoe Mount | <p>I wanted a more flexible and universal way of mounting a phone or a camera, so I decided to add these cold shoe mounts to a faceplate since the screen seems stable enough. For the uninitiated in photography out there, these are a common accessory for attaching camera equipment on things. <br><br>I also didn't w... | [
"camera",
"mount",
"accessory",
"lab",
"carbon",
"x1",
"bambu",
"bambulab",
"p1p",
"p1s"
] | 3D Printers > Accessories | [
"529338/images/image_1_compressed.jpg",
"529338/images/image_2_compressed.jpg",
"529338/images/image_3_compressed.jpg",
"529338/images/image_4_compressed.jpg",
"529338/images/image_5_compressed.jpg"
] | [
"529338/stls/P1P Screen Faceplate Cold Shoe Mount - No Backside.stl"
] | CC-BY | https://www.printables.com/model/529338 | data_0045.tar |
390335 | P1P Pegboard Gridfinity Base | <p>A gridfinity base to mount on a Bambulabs P1P Pegboard modplate</p> | [
"pegboard",
"gridfinity",
"bambulabs",
"p1p",
"modplate"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"390335/images/image_1_compressed.jpg"
] | [
"390335/stls/P1P Gridfinity Pegboard Base_1x3 Gridfinity Base 2.stl",
"390335/stls/P1P Gridfinity Pegboard Base_1x3 Gridfinity Base.stl"
] | CC0 | https://www.printables.com/model/390335 | data_0045.tar |
349944 | P1P rectum (BETA) | <p>Mount it with double sided adhesive tape to your printer. </p><p>Remixing is welcome. (STEP included)</p> | [
"bambulab",
"bambux1",
"p1p",
"bambulabp1p",
"bambup1p"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"349944/images/image_1_compressed.jpg"
] | [
"349944/stls/rectum.stl",
"349944/stls/rectum2.stl"
] | CC-BY | https://www.printables.com/model/349944 | data_0045.tar |
552337 | P1P TPU Profile Configurations - Black Overture TPU | <p>**This original config was made by Florian Greco, I just adjusted the config to be more in line for P1P usage**</p><p>The files in this post are made to be imported to Bambu Studio or Orca Slicer (I am using Orca Slicer), and can be used as potentially optimal profiles for the Printer, Filament, and Processing of th... | [
"tpu",
"overture",
"configuration",
"p1p"
] | 3D Printers > Test Models | [
"552337/images/image_1_compressed.jpg",
"552337/images/image_2_compressed.jpg",
"552337/images/image_3_compressed.jpg"
] | [
"552337/stls/3DBenchy.stl"
] | CC-BY | https://www.printables.com/model/552337 | data_0045.tar |
108579 | Pac-Man Cherry MX Keycaps | <p>Who doesn't love some nostalgia? Perfect for the function row or number keys!</p><p>NOTE: If you are using Cura, you can add a filament change script (more info below) and change out the filament to whichever color you'd like to get a similar effect as pictured.</p><p>Enjoy and post your makes!</p><p><strong>Printer... | [
"pacman",
"keycap",
"cherry",
"cherrymx",
"mechanicalkeyboard",
"thingiverse",
"pacmankey",
"pacmanghost",
"keycaps",
"cherrykeycap",
"keeb",
"artisan"
] | Gadgets > Computers | [
"108579/images/image_1_compressed.jpg",
"108579/images/image_10_compressed.jpg",
"108579/images/image_2_compressed.jpg",
"108579/images/image_3_compressed.jpg",
"108579/images/image_4_compressed.jpg",
"108579/images/image_5_compressed.jpg",
"108579/images/image_6_compressed.jpg",
"108579/images/image_... | [
"108579/stls/Pac-Man_-_Big_Dot.stl",
"108579/stls/Pac-Man_-_Cherry.stl",
"108579/stls/Pac-Man_-_Ghost.stl",
"108579/stls/Pac-Man_-_Mr.Pac-Man.stl",
"108579/stls/Pac-Man_-_Small_Dot.stl"
] | CC-BY | https://www.printables.com/model/108579 | data_0045.tar |
1280491 | Pack of Four Garden Gnomes | <p>Just a pack of four non-traditional <strong>garden gnomes</strong>.</p><p>You can scale them up as you want, but i do not recommend significantly reducing the size, as this could lead to errors in wall thickness.</p><p>My print settings(PLA): 0.16mm layers, 2 walls, 10%gyroid, tree supports, brim</p><p>Happy printin... | [
"decoration",
"statue",
"decor",
"parody",
"hipster",
"funny",
"garden",
"dwarf",
"drinking",
"gnome",
"hoodie",
"muscular",
"bodybuilder"
] | Household > Home Decor | [
"1280491/images/image_1_compressed.jpg",
"1280491/images/image_10_compressed.jpg",
"1280491/images/image_11_compressed.jpg",
"1280491/images/image_12_compressed.jpg",
"1280491/images/image_13_compressed.jpg",
"1280491/images/image_2_compressed.jpg",
"1280491/images/image_3_compressed.jpg",
"1280491/im... | [
"1280491/stls/angry_bodybuilder.stl",
"1280491/stls/bodybuilder.stl",
"1280491/stls/Drinking.stl",
"1280491/stls/hipster.stl"
] | CC-BY | https://www.printables.com/model/1280491 | data_0045.tar |
597630 | Pacman | <p>Pacman fits 10mm magnets. Feel free to modify.</p><p>Easy print on Ender 3 without support .2mm layer hight. I recommend to glue the magnets with some hot glue.</p><p>Pacman ghosts and space invader are present as well if you like to spice up your fridge or whiteboard. 😀</p> | [
"kitchen",
"office",
"retrogaming",
"magnet",
"arcade",
"fridgemagnet",
"whiteboard"
] | Household > Office | [
"597630/images/image_1_compressed.jpg",
"597630/images/image_2_compressed.jpg",
"597630/images/image_3_compressed.jpg"
] | [
"597630/stls/Pacman-Magnet-Pacman.stl"
] | GPL3.0 | https://www.printables.com/model/597630 | data_0045.tar |
513637 | Pacman and multicolor ghosts with simple printer (no MMU). Print in place. | <p>These prints are the first times I tried multicolor printing with a simple printer, with a single extruder and without additional system (MMU, palette, etc...).</p><p>· To make a ghost, 3 STL will be used.</p><p>· Except for the last STL (the body of the ghost) all other files have a height of 0.5mm. To avoid collis... | [
"mmu",
"multicolor",
"ghost",
"arcade",
"pacman",
"pacmanghost",
"inky",
"blinky",
"clyde",
"pinky"
] | Art & Design > 2D Plates & Logos | [
"513637/images/image_1_compressed.jpg",
"513637/images/image_2_compressed.jpg",
"513637/images/image_3_compressed.jpg"
] | [
"513637/stls/01 white ghost.stl",
"513637/stls/02 black ghost.stl",
"513637/stls/03 color ghost.stl",
"513637/stls/Pacman.stl"
] | CC-BY | https://www.printables.com/model/513637 | data_0045.tar |
597627 | Pacman Ghost | <p>Pacman Ghost fits 10mm magnets. Feel free to modify.</p><p>Easy print on Ender 3 without support .2mm layer hight. I recommend to glue the magnets with some hot glue.</p><p>Pacman and space invader are present as well if you like to spice up your fridge or whiteboard. 😀</p> | [
"magnet",
"arcade",
"pacman",
"fridgemagnet",
"whiteboard"
] | Household > Office | [
"597627/images/image_1_compressed.jpg",
"597627/images/image_2_compressed.jpg",
"597627/images/image_3_compressed.jpg"
] | [
"597627/stls/PacmanGhost-Magnet-Ghost.stl"
] | GPL3.0 | https://www.printables.com/model/597627 | data_0045.tar |
515801 | Padel Hook | <p>You can use a 15% infill.<br>No support needed</p> | [
"sport",
"tennis",
"sports",
"hooks",
"padel",
"pickleball"
] | Sports & Outdoor > Outdoor Sports | [
"515801/images/image_1_compressed.jpg",
"515801/images/image_2_compressed.jpg"
] | [
"515801/stls/Hook.stl"
] | CC-BY | https://www.printables.com/model/515801 | data_0045.tar |
525127 | Padel racket holder | <p>I have printed with a brim for better bed adhesion but depending on your bed surface your mileage may vary</p> | [
"padel"
] | Sports & Outdoor > Other Sports | [
"525127/images/image_1_compressed.jpg",
"525127/images/image_2_compressed.jpg"
] | [
"525127/stls/soporte.stl"
] | CC-BY | https://www.printables.com/model/525127 | data_0045.tar |
1356918 | Pain Stim Fidget | <p>This is a simple fidget toy to provide a non-destructive alternative for those who stim with pain. Also helpful to distract or prevent from skin picking.<br><br>A .scad file is provided to allow for customizing the size of the roller and spikes. The thumbnail was created with Blender.<br><br>Inspired by <a href="htt... | [
"fidget",
"fidgettoy"
] | Toys & Games > Other Toys & Games | [
"1356918/images/image_1_compressed.jpg",
"1356918/images/image_2_compressed.jpg"
] | [
"1356918/stls/large_spikes_short_10.stl",
"1356918/stls/large_spikes_tall_60.stl",
"1356918/stls/small_spikes_short_10.stl",
"1356918/stls/small_spikes_tall_60.stl"
] | GPL3.0 | https://www.printables.com/model/1356918 | data_0045.tar |
1395966 | Paint Brush Cleaner |
<p>Another paint brush cleaner</p>
<p>The holder has the cavity to hold the brush with 3mm
I'm modeling other holders for brushes of different diameters</p>
<h3>Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>Flyingbear Ghost</p>
<p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div></... | [
"paint",
"cleaner",
"thingiverse",
"paintbrush",
"paintbrushholder",
"paintbrushcleaner"
] | Art & Design > Other Art & Designs | [
"1395966/images/image_1_compressed.jpg",
"1395966/images/image_2_compressed.jpg",
"1395966/images/image_3_compressed.jpg",
"1395966/images/image_4_compressed.jpg",
"1395966/images/image_5_compressed.jpg",
"1395966/images/image_6_compressed.jpg"
] | [
"1395966/stls/paintbrushcleaner.stl",
"1395966/stls/paintbrushholder.stl"
] | CC-BY | https://www.printables.com/model/1395966 | data_0045.tar |
406949 | Paint brush or tool holder - max 28 brushes | <p>Remix of cannedbleach paint brush holder remix to fit fewer brushes or tools. </p><p>two configurations:</p><p>+ 28 small holes</p><p>+ 12 small holes and 4 large holes</p><p>PLA, .2 layer, 15% infill</p><p>Can sink the legs .27mm below build plate if you don't want to deal with supports or funny little overhan... | [
"tool",
"holder",
"stand",
"brush",
"tools",
"toolholder",
"paint",
"paintbrush",
"paintbrushholder"
] | Hobby & Makers > Organizers | [
"406949/images/image_1_compressed.jpg",
"406949/images/image_10_compressed.jpg",
"406949/images/image_11_compressed.jpg",
"406949/images/image_2_compressed.jpg",
"406949/images/image_3_compressed.jpg",
"406949/images/image_4_compressed.jpg",
"406949/images/image_5_compressed.jpg",
"406949/images/image... | [
"406949/stls/4x8 brush holder remix.stl",
"406949/stls/paint brush holder 12 sml and 4 lg holes.stl"
] | CC-BY | https://www.printables.com/model/406949 | data_0045.tar |
1324685 | Paint can spout (parametric design) | <p>Haven't found a good design of spouts for paint cans that are in common sizes where I live, so I made one.</p><p>STLs for 0.75l and 2,5l cans are attached, but feel free to adjust the inner and outer parameters in the Fusion360 file to get another size. Simply type in the measurements and the tolerance should make i... | [] | Hobby & Makers > Tools | [
"1324685/images/image_1_compressed.jpg",
"1324685/images/image_2_compressed.jpg",
"1324685/images/image_3_compressed.jpg",
"1324685/images/image_4_compressed.jpg"
] | [
"1324685/stls/paint spout 0,7L 80.8mm.stl",
"1324685/stls/paint spout 2,5L 119,7mm brim.stl"
] | CC-BY | https://www.printables.com/model/1324685 | data_0045.tar |
356361 | Paint Rack for Citadel paints | <p>Our dog spilled a paint pot, so we needed something to prevent that from happening!</p><p>Holds 20 paint pots - pots are friction fitting, won't come out on their own.</p> | [
"holder",
"citadel",
"warhammer",
"paint"
] | Hobby & Makers > Tools | [
"356361/images/image_1_compressed.jpg"
] | [
"356361/stls/CitadelPaintRack.stl"
] | CC-BY | https://www.printables.com/model/356361 | data_0045.tar |
438486 | Paint Scraper Set | <p>Set of four scrapers, 50mm and 10mm in two variants: stiff and flexy.<br>Designed to scrape softened paint without damaging surface underneath it.<br><br>+ a nice 3mm round scraper remix from <a href="https://www.printables.com/@osterwood_2772073">@osterwood_2772073</a><br><a href="https://www.printables.com/model/1... | [
"scraper"
] | Hobby & Makers > Tools | [
"438486/images/image_1_compressed.jpg"
] | [
"438486/stls/Paint Scraper 10mm - Flexy.stl",
"438486/stls/Paint Scraper 10mm.stl",
"438486/stls/Paint Scraper 50mm - Flexy.stl",
"438486/stls/Paint Scraper 50mm.stl"
] | CC-BY | https://www.printables.com/model/438486 | data_0045.tar |
1039271 | Paint Water Cup | <p>The special thing about this cup is that it is much wider at the bottom than at the top, so that it can hardly be knocked over.</p><p>It is also flat enough to be easy to get into with a brush.</p><p>In addition, the cup has a storage area at the bottom with a drip tray for brushes that are not in use.</p><p>I also ... | [
"cup",
"paint",
"painting",
"minipainting"
] | Hobby & Makers > Tools | [
"1039271/images/image_1_compressed.jpg",
"1039271/images/image_2_compressed.jpg"
] | [
"1039271/stls/PaintWaterCup.stl"
] | GPL3.0 | https://www.printables.com/model/1039271 | data_0045.tar |
545867 | Paintbrush Holder, up to 84 Brushes | <p>A Paintbrush holder with individual places for up to 84 brushes or pens with a maximum shaft diameter of 10mm.</p><p>Upper supports at 80, 100 and 120mm height.</p><p>The individual brush slots will likely not need supports. They're exactly the size of a 3DBenchy roof overhang, if your printer can produce a clean Be... | [
"holder",
"stand",
"brush",
"penholder",
"crafts",
"pens",
"thingiverse",
"paintbrush",
"paintbrushholder",
"toothbrushstand",
"brushholder",
"artsandcrafts",
"brushes",
"paintbrushstand"
] | Household > Office | [
"545867/images/image_1_compressed.jpg",
"545867/images/image_2_compressed.jpg",
"545867/images/image_3_compressed.jpg",
"545867/images/image_4_compressed.jpg",
"545867/images/image_5_compressed.jpg"
] | [
"545867/stls/Brushholder.stl"
] | CC-BY | https://www.printables.com/model/545867 | data_0045.tar |
231388 | Painting standoff | <p>Simple shapes that raises your flat, freshly painted surface off the table so the paint doesn't smudge when you turn it over. Print 3 or more, scale them up in your slicer if 40mm sides are too small.</p><p>The shape with the indent is easier to pick up. In fact the smooth side version is so annoying to pick up that... | [] | Art & Design > Other Art & Designs | [
"231388/images/image_1_compressed.jpg",
"231388/images/image_2_compressed.jpg"
] | [
"231388/stls/Tetrahedron Indent.stl",
"231388/stls/Tetrahedron-40.stl",
"231388/stls/Tetrahedron.stl"
] | CC-BY | https://www.printables.com/model/231388 | data_0045.tar |
187838 | Painttube Squeezer | <p>This is a remix of the toothpaste Squeezer by Deviator2x <br>I made it so that 8cm long (paint)tubes will fit.</p><p>I would recoment high infill or even a stronger material if your painttubes are made out of thicker metal.</p><p>Have fun printing and don't be shy to share your prints ;)</p><p>Support are not o... | [
"tool",
"art",
"paint",
"utility",
"squeezer",
"toothpastesqueezer",
"painttubesqueezer",
"painttube"
] | Hobby & Makers > Tools | [
"187838/images/image_1_compressed.jpg"
] | [
"187838/stls/Frame_80mm.stl",
"187838/stls/Key_80mm.stl",
"187838/stls/rachet.stl"
] | CC-BY | https://www.printables.com/model/187838 | data_0045.tar |
504625 | Paleo + Expansion Card Organizer | <h3>Update 02.02.2025</h3><ul><li>Included<strong> U: The Caves</strong> expansion </li><li>The total length stays the same to fit the box, i.e. the spacing is reduced a little bit</li></ul><figure class="image"><img src="https://media.printables.com/media/prints/504625/rich_content/de2b45ba-f321-4f29-b395-44c73eb... | [
"organizer",
"sorting",
"boardgame",
"cardholder",
"boardgameinserts",
"boardgameinsert",
"boardgameorganizer",
"paleo"
] | Toys & Games > Board Games | [
"504625/images/image_1_compressed.jpg",
"504625/images/image_2_compressed.jpg",
"504625/images/image_3_compressed.jpg",
"504625/images/image_4_compressed.jpg",
"504625/images/image_5_compressed.jpg"
] | [
"504625/stls/CardHolder-V4.stl",
"504625/stls/CardHolder-V5_U_Caves.stl",
"504625/stls/Paleo - Card Organizer.stl"
] | CC-BY | https://www.printables.com/model/504625 | data_0045.tar |
990202 | Paleo Card Organiser (Sleeved cards) | <p><strong>Card Organiser for Paleo.</strong></p><p>Thank-you to <strong>Andun_HH</strong> For his original model:<a href="https://www.printables.com/model/504625-paleo-expansion-card-organizer"> https://www.printables.com/model/504625-paleo-expansion-card-organizer</a></p><p> </p><p><strong>Remix Changes:</s... | [
"sorting",
"boardgame",
"cardbox",
"boardgameorganizer",
"paleo"
] | Hobby & Makers > Organizers | [
"990202/images/image_1_compressed.jpg",
"990202/images/image_2_compressed.jpg",
"990202/images/image_3_compressed.jpg",
"990202/images/image_4_compressed.jpg",
"990202/images/image_5_compressed.jpg"
] | [
"990202/stls/Paleo - CardHolder FINAL V1.stl"
] | CC-BY | https://www.printables.com/model/990202 | data_0045.tar |
579294 | Pan Lid Knob | <p>Printed in PLA about one year ago. Even in PLA it does hold up in our dishwasher ever since. But I needed to retight the screw after the first wash.</p><p>Print with Supports!</p><p>Required Hardware: M5 Screw</p> | [] | Household > Kitchen | [
"579294/images/image_1_compressed.jpg",
"579294/images/image_2_compressed.jpg",
"579294/images/image_3_compressed.jpg"
] | [
"579294/stls/pan knob v2.stl"
] | CC0 | https://www.printables.com/model/579294 | data_0045.tar |
141942 | PanaVise Jaw Pad Upgrade |
<p>Made these to replace some old beat up pads. They fit right in and they should be able to hold things a bit better than the originals. 2 1/2in wide. Print with a 100% infill for best results. it shouldn't need any supports either.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>RepRap</p>
<p... | [
"grip",
"vise",
"jaw",
"pad",
"thingiverse",
"panavise",
"301"
] | Hobby & Makers > Other Ideas | [
"141942/images/image_1_compressed.jpg",
"141942/images/image_2_compressed.jpg",
"141942/images/image_3_compressed.jpg",
"141942/images/image_4_compressed.jpg",
"141942/images/image_5_compressed.jpg"
] | [
"141942/stls/Panavise_Jaw.stl"
] | CC-BY | https://www.printables.com/model/141942 | data_0045.tar |
346253 | Panavise jr Speed Control Wheel with retention (so it doesn't fall off) |
<p>This is a Speed Wheel for a Panavise Jr. I recreated the wheel and added retention nubs to it. I found that the one sold by Panavise would occasionally fall off if you're spinning quickly. This one has a tight fit and won't come off until you want it to.</p>
<p>Also, if anyone is curious, the orange "feet" on the... | [
"tool",
"tools",
"toolholder",
"vise",
"handtools",
"thingiverse",
"tablevise",
"panavise",
"panavisejr"
] | Hobby & Makers > Tools | [
"346253/images/image_1_compressed.jpg",
"346253/images/image_2_compressed.jpg",
"346253/images/image_3_compressed.jpg"
] | [
"346253/stls/Panavise_jr_speed_control_wheel_with_retention.stl"
] | CC-BY | https://www.printables.com/model/346253 | data_0045.tar |
862705 | Paper Hanger | <p>Attach this to the wall with blue tape, then you get a wall paper hanger!</p><p>With this, you'll never damage the wall paint, or the paper; the blue tape will be invisible after putting on the paper.</p><p>You can use it to hang photos, posters, or other home decors on the wall.</p><p>It can also hang dry-fire targ... | [
"decoration",
"hanger",
"shooting",
"homedecor",
"dryfire",
"dryfirepractice"
] | Household > Home Decor | [
"862705/images/image_1_compressed.jpg",
"862705/images/image_2_compressed.jpg"
] | [
"862705/stls/target_holder.stl"
] | CC-BY | https://www.printables.com/model/862705 | data_0045.tar |
539094 | Paper towel Holder for IKEA SUNNERSTA | <p>A paper towl holder for the IKEA SUNNERSTA wall mount system that i think is better than the original. <br>All is Push fit in the video but you can always glue it with super glue.</p> | [
"papertowelholder"
] | Household > Kitchen | [
"539094/images/image_1_compressed.jpg",
"539094/images/image_2_compressed.jpg"
] | [
"539094/stls/Back spacer.stl",
"539094/stls/Left Part1.stl",
"539094/stls/Left Part2.stl",
"539094/stls/Notch x 2.stl",
"539094/stls/Right Part1.stl",
"539094/stls/Right Part2.stl"
] | CC-BY | https://www.printables.com/model/539094 | data_0045.tar |
530889 | Paper Towel Wall Mount | <p>Simpel Paper Towel wall mount for workshop.</p><p> </p><ul><li>Print materiel used: Filament Pm Black PetG. </li><li>Printede with Support on build plate only.</li><li>Main Mount: Printede in 100% Rectilinear infill.</li><li>Bolt: Printede in 15% Gyroid infill. And Printede in scale 99%.</li></ul><p> ... | [
"towel",
"towelholder",
"workshoporganiser"
] | Hobby & Makers > Organizers | [
"530889/images/image_1_compressed.jpg",
"530889/images/image_2_compressed.jpg",
"530889/images/image_3_compressed.jpg",
"530889/images/image_4_compressed.jpg",
"530889/images/image_5_compressed.jpg",
"530889/images/image_6_compressed.jpg",
"530889/images/image_7_compressed.jpg"
] | [
"530889/stls/Towel-Wall-Mount-Bolt.stl",
"530889/stls/Towel-Wall-Mount.stl"
] | CC0 | https://www.printables.com/model/530889 | data_0045.tar |
989834 | Paracord spool holder | <p>Paracord spool holder in 2 parts. </p><p>Just print and glue the 2 pieces together.</p><p>In the picture the spools hold at least 20m of 3mm paracord and are not full.</p><p>There are 2 versions. </p><ul><li>4mm holes for up to 4mm paracord </li><li>8mm holes for up to 8mm paracord </li></ul><p>:... | [
"spool",
"spoolholder",
"paracord"
] | Hobby & Makers > Organizers | [
"989834/images/image_1_compressed.jpg",
"989834/images/image_2_compressed.jpg",
"989834/images/image_3_compressed.jpg"
] | [
"989834/stls/4mm holes part 1.stl",
"989834/stls/4mm holes part 2.stl",
"989834/stls/8 mm holes part 1.stl",
"989834/stls/8 mm holes part 2.stl"
] | CC-BY | https://www.printables.com/model/989834 | data_0045.tar |
99129 | Paracord tightener for 3mm lines | <p><strong>Use-case</strong></p><p>This part can be used to connect to ends of a paracord, after it has been pulled tight. In contrast to trying a simple know, there will be no additional slack created during fixing the loose end. The main advantage however is that the connection can be opened very easily without break... | [] | Household > Outdoor & Garden | [
"99129/images/image_1_compressed.jpg"
] | [
"99129/stls/Paracord tightener for 3mm lines.stl"
] | CC-BY | https://www.printables.com/model/99129 | data_0045.tar |
906840 | Parameterised Under Desk Cable Management Tray | <p>A fully parameterised cable management tray / cable holder for mounting under a desk. Includes screw holes or you can attach it using double sided tape.</p><p>40 and 75mm wide versions included (both 100mm long) along with the 3mf file if you want to make different sizes.</p><p>Note this design is quite rough as it'... | [] | Household > Office | [
"906840/images/image_1_compressed.jpg"
] | [
"906840/stls/Under Desk Cable Management Tray 40x100.stl",
"906840/stls/Under Desk Cable Management Tray 75x100.stl",
"906840/stls/Under Desk Cable Management Tray.stl"
] | CC-BY | https://www.printables.com/model/906840 | data_0045.tar |
142790 | Parameterized Box V2 w/Latching Lid |
<p>All new Version 2, a Completely different latching mechanism inspired by user Mr FuFu. I modified his solution and instead of basically forcing two nubs passed each other as in the old design there is a graceful piece that bends and snaps in place. This version also scales a bit better. Though unfortunately the l... | [
"boardgames",
"thingiverse"
] | Toys & Games > Outdoor Toys | [
"142790/images/image_1_compressed.jpg",
"142790/images/image_2_compressed.jpg",
"142790/images/image_3_compressed.jpg",
"142790/images/image_4_compressed.jpg",
"142790/images/image_5_compressed.jpg"
] | [
"142790/stls/BoxSlideLid.stl",
"142790/stls/large_display_BoxSlideLid_142790.stl"
] | CC-BY | https://www.printables.com/model/142790 | data_0045.tar |
479182 | Parametric Bambu Lab Build Plate Holder (10+ build plates) | <p>A parametric redesign of <a href="https://www.printables.com/model/326958-bambu-lab-x1-build-plate-holder">this build plate holder</a> with configurable slot dimensions and number of slots.</p><p>I made this because I needed 10 slots (yes I might have a problem) and wanted a build plate holder that could be reconfig... | [
"parametric",
"bambu",
"buildplateholder",
"bambulab",
"bambulabx1carbon",
"p1p"
] | 3D Printers > Accessories | [
"479182/images/image_1_compressed.jpg",
"479182/images/image_2_compressed.jpg",
"479182/images/image_3_compressed.jpg",
"479182/images/image_4_compressed.jpg",
"479182/images/image_5_compressed.jpg",
"479182/images/image_6_compressed.jpg",
"479182/images/image_7_compressed.jpg"
] | [
"479182/stls/Bambu X1 Build Plate Holder - 10 slots.stl",
"479182/stls/Bambu X1 Build Plate Holder - 8 slots.stl"
] | CC-BY | https://www.printables.com/model/479182 | data_0045.tar |
117099 | Parametric Book Stand with Variables |
<p>Needed a stand to hold quilt patterns, so modified the original and added a list of parameters at the top for easier modification further.</p>
<p>Modified .SCAD file is included for further modification.</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>RepRap</p>
<p><p class="detail-setting ... | [
"thingiverse",
"bookstand"
] | Household > Office | [
"117099/images/image_1_compressed.jpg",
"117099/images/image_2_compressed.jpg",
"117099/images/image_3_compressed.jpg"
] | [
"117099/stls/Pattern_Stand_v02.stl"
] | CC-BY | https://www.printables.com/model/117099 | data_0045.tar |
124173 | Parametric Cable Organizer | <p>Parametric design - change anything! Fusion 360 file included.</p><p>Current design (Version2):</p><ul><li>Countersunk M4 screws</li><li>4mm spacing</li><li>10 arms (= 9 spaces for cables)</li><li>lower back mounting height compared to version 1</li></ul> | [
"parametric",
"organizer",
"laboratory",
"cableorganizer",
"parametricdesign"
] | Hobby & Makers > Organizers | [
"124173/images/image_1_compressed.jpg"
] | [
"124173/stls/cable-organizer-v1.stl",
"124173/stls/cable-organizer-v2.stl"
] | GPL3.0 | https://www.printables.com/model/124173 | data_0045.tar |
514422 | Parametric Clamp | <h3>Info</h3><p>This is a simple but potentially useful print-in-place flex clamp/clip. The mesh files uploaded here are just example outputs, you should open the <strong>.scad</strong><i><strong> </strong></i>file with <strong>OpenSCAD</strong> and use the customizer panel to create your own. </p><p>As it stands ... | [
"parametric",
"clip",
"spring",
"printinplace",
"clamp",
"customizer",
"flex",
"openscad",
"utility",
"useful",
"compliant",
"simple",
"scad",
"script"
] | Hobby & Makers > Tools | [
"514422/images/image_1_compressed.jpg",
"514422/images/image_2_compressed.jpg",
"514422/images/image_3_compressed.jpg",
"514422/images/image_4_compressed.jpg",
"514422/images/image_5_compressed.jpg",
"514422/images/image_6_compressed.jpg",
"514422/images/image_7_compressed.jpg"
] | [
"514422/stls/BigClamp.stl",
"514422/stls/Clamp.stl",
"514422/stls/LilClamp.stl",
"514422/stls/TallClamp.stl"
] | GPL3.0 | https://www.printables.com/model/514422 | data_0045.tar |
141916 | Parametric Desk Grommet | [
"cable",
"desk",
"grommet",
"openscad",
"parametrics"
] | Hobby & Makers > Organizers | [
"141916/images/image_1_compressed.jpg",
"141916/images/image_2_compressed.jpg",
"141916/images/image_3_compressed.jpg"
] | [
"141916/stls/grommet_cover.stl",
"141916/stls/grommet_hole.stl"
] | CC-BY | https://www.printables.com/model/141916 | data_0045.tar | |
222985 | Parametric Electrical Junction Box | <p>Parametric junction box for electric wiring. Use the default 100mm x 100mm x 50mm (8 holes sized for M20 cable glands) STLs supplied, or adjust the OpenSCAD file to control dimensions, number of holes, cable gland diameter and so on. Make the exact junction box you need! Lid screws down with M3x12 (or thereabouts) s... | [
"junctionbox"
] | Household > Other House Equipment | [
"222985/images/image_1_compressed.jpg",
"222985/images/image_2_compressed.jpg"
] | [
"222985/stls/junctionbox_blocker.stl",
"222985/stls/junctionbox_cablegland_bushing.stl",
"222985/stls/junctionbox_lid.stl"
] | GPL3.0 | https://www.printables.com/model/222985 | data_0045.tar |
25417 | parametric glass markers with letter | <p>Simple parametric markings for glasses.<br/>
All you need is the glass diameter and thickness.</p>
<p>You could also use symbols instead of letters.<br/>
Simply use a different character set for the "Text" command.</p>
<p>Einfache parametrische Markierungen für Gläser.<br/>
Sie benötigen nur den Glassdurchmesser ... | [
"party",
"marker",
"glass",
"thingiverse",
"markers"
] | Household > Kitchen | [
"25417/images/image_1_compressed.jpg"
] | [
"25417/stls/glasmarker_100_3_a.stl",
"25417/stls/glasmarker_100_3_a_25417.stl"
] | CC-BY | https://www.printables.com/model/25417 | data_0045.tar |
85300 | Parametric Guitar Pick with grip | <p>Finding the right guitar pick is always a hassle. Size, shape and thickness matter. And personally I like a grip to place the thumb in. </p><p>In the FreeCad you will find a spreadsheet where you can change: thickness, size and shape and also the height of the grip. </p><p>The pick in the printfile is 0,7 ... | [
"parametric",
"pick",
"adjustable",
"guitarpick",
"clever"
] | Hobby & Makers > Music | [
"85300/images/image_1_compressed.jpg",
"85300/images/image_2_compressed.jpg",
"85300/images/image_3_compressed.jpg",
"85300/images/image_4_compressed.jpg",
"85300/images/image_5_compressed.jpg"
] | [
"85300/stls/PLectrum_01-PickBody_0,7mm.stl"
] | CC-BY | https://www.printables.com/model/85300 | data_0045.tar |
523162 | Parametric hangers for modular tape storage | <p>These are hangers for the <a href="https://www.printables.com/model/282832-modular-tape-storage">modular tape storage</a> system. You still need to download the rest of the components from there. I wanted some custom sizes so I remade the hangers in OnShape.</p><p>I've uploaded a couple samples, but what you want to... | [
"tapeholder"
] | Hobby & Makers > Organizers | [
"523162/images/image_1_compressed.jpg",
"523162/images/image_2_compressed.jpg"
] | [
"523162/stls/Tape hanger sample - large.stl",
"523162/stls/Tape hanger sample - medium.stl",
"523162/stls/Tape hanger sample - small.stl"
] | GPL2.0 | https://www.printables.com/model/523162 | data_0045.tar |
299519 | Parametric IKEA Skadis lock plugs. STLS for .6mm and .8mm nozzles | <p>Remade JayKeyStk's Skadis plugs in OnShape to be able to adjust the wall widths for different nozzle sizes. This works with the hooks designed in the original project, but omitted the filleted bottom section as the flat bottom still locks in the hooks well enough.</p><p> </p><p>Made with OnShape, modify i... | [
"parametric",
"skadis"
] | Hobby & Makers > Organizers | [
"299519/images/image_1_compressed.jpg"
] | [
"299519/stls/6mm nozzle loose.stl",
"299519/stls/6mm nozzle tight.stl",
"299519/stls/8mm nozzle loose.stl",
"299519/stls/8mm nozzle tight.stl"
] | CC-BY | https://www.printables.com/model/299519 | data_0045.tar |
264711 | Parametric Knife Holder | <p>Customizable knife holder. Comes apart so you can get inside to clean it out easily in case crumbs or whatnot drop into it. Width of the gaps is a parameter so you can adjust for various knife thicknesses although, in this version, they all have to be the same width so mixing a thick steel knife with a ceramic... | [] | Household > Kitchen | [
"264711/images/image_1_compressed.jpg"
] | [
"264711/stls/Knife Holder Base.stl",
"264711/stls/Knife Holder.stl"
] | CC-BY | https://www.printables.com/model/264711 | data_0045.tar |
1578373 | Parametric lens cone for Fat Shot X | <h3>Important updates</h3><ul><li><p><strong>2026-04-21:</strong></p><ul><li><p>Updated the structure of the file list. Parts that are common for all lens cones are now in a separate folder.</p></li></ul></li><li><p><strong>2025-03-01:</strong></p><ul><li><p>Fixed errors that appeared on certain offset operations when ... | [
"film",
"largeformat",
"filmphotography",
"mediumformat"
] | Gadgets > Photo & Video | [
"1578373/images/image_1_compressed.jpg",
"1578373/images/image_2_compressed.jpg",
"1578373/images/image_3_compressed.jpg",
"1578373/images/image_4_compressed.jpg"
] | [
"1578373/stls/Copal 0 Spacer 1mm.stl",
"1578373/stls/FSX Felt Cutting Template.stl",
"1578373/stls/FSX Guard Bottom.stl",
"1578373/stls/FSX Guard Top.stl",
"1578373/stls/FSX Lens Board (Copal #0).stl",
"1578373/stls/FSX Lens Board (Copal #1).stl",
"1578373/stls/FSX Lens Cone Flange.stl",
"1578373/stls... | CC-BY | https://www.printables.com/model/1578373 | data_0045.tar |
93612 | Parametric lubing stations |
<h3> Parametric MX switch lubing stations</h3>
<h3>UPDATE 03/03/2020: Fixed a bug in the parameters, changed sizing to fit exactly the amount of switches defined in slotted model</h3>
<p>Included default files are 6x4 lubing stations, 9mm thick (Doesn't require standoffs)</p>
<p>The size and shape of the lubing statio... | [
"tool",
"keyboard",
"mechanicalkeyboard",
"thingiverse",
"lubestation"
] | Hobby & Makers > Other Ideas | [
"93612/images/image_1_compressed.jpg",
"93612/images/image_2_compressed.jpg",
"93612/images/image_3_compressed.jpg",
"93612/images/image_4_compressed.jpg",
"93612/images/image_5_compressed.jpg"
] | [
"93612/stls/Lubing_Station_-_cutouts.stl",
"93612/stls/Lubing_station_-_slotted.stl",
"93612/stls/Lubing_station_riser.stl",
"93612/stls/Test_piece_for_cutouts.stl"
] | CC-BY | https://www.printables.com/model/93612 | data_0045.tar |
528873 | Parametric magazine inserts for UpLula loading tool | <p>This is a customizable insert for UpLula magazine loaders, to precisely fit undersized magazines.</p><p>BadFishy's original insert was a good idea, but I thought it needed a few tweaks:</p><ul><li>shortened the overall length, and added a lip to pull it out.</li><li>filleted the corners for easy insertion and remova... | [
"thingiverse",
"loader",
"magazine",
"ruger",
"speedloader",
"1911",
"uplula",
"smithandwesson",
"browning",
"waltherppk"
] | Sports & Outdoor > Outdoor Sports | [
"528873/images/image_1_compressed.jpg",
"528873/images/image_10_compressed.jpg",
"528873/images/image_2_compressed.jpg",
"528873/images/image_3_compressed.jpg",
"528873/images/image_4_compressed.jpg",
"528873/images/image_5_compressed.jpg",
"528873/images/image_6_compressed.jpg",
"528873/images/image_... | [
"528873/stls/uplula-insert-browning-hipower.stl",
"528873/stls/uplula-insert-cz-75b.stl",
"528873/stls/uplula-insert-glock-22-23.stl",
"528873/stls/uplula-insert-m1911.stl",
"528873/stls/uplula-insert-ruger-american.stl",
"528873/stls/uplula-insert-ruger-lcpmax.stl",
"528873/stls/uplula-insert-star-fire... | CC-BY | https://www.printables.com/model/528873 | data_0045.tar |
831008 | Parametric Monitor Phone Mount (Webcam) | <p>Made this so I could use an old phone as my webcam.<br>Recommended using a little bit of hot glue to make it more “grippy”.</p><p>On the parametric file you can set the size and angle of your monitor and phone.<br><br><i><strong>Print Settings</strong></i></p><ul><li><i>Material: PLA/PETG</i></li><li><i>Layer height... | [
"mount",
"phonestand",
"smartphone",
"smartphoneholder",
"monitor",
"phonemount"
] | Household > Office | [
"831008/images/image_1_compressed.jpg",
"831008/images/image_2_compressed.jpg",
"831008/images/image_3_compressed.jpg"
] | [
"831008/stls/MonitorPhoneMount10mm.stl",
"831008/stls/MonitorPhoneMount8.5mm.stl"
] | CC-BY | https://www.printables.com/model/831008 | data_0045.tar |
894794 | Parametric Nerf Dart Holder | <p>OpenSCAD files for nerf dart holders.<br>Some sample files included as well as the source openSCAD file</p><p>This is designed with holes sized for m3 bolts, spaced 10mm apart. This will allow you to connect rail adaptors to the bottom using m3 bolts or glue</p><p>Nerf Rail Mounting:</p><ul><li>Use the included side... | [
"dart",
"nerf",
"rail"
] | Hobby & Makers > Mechanical Parts | [
"894794/images/image_1_compressed.jpg",
"894794/images/image_2_compressed.jpg"
] | [
"894794/stls/10xDartHolder.stl",
"894794/stls/10xMegaDartHolder.stl",
"894794/stls/24xDartHolder.stl",
"894794/stls/5xDartHolder.stl",
"894794/stls/6xDartHolder.stl",
"894794/stls/6xMegaDartHolder.stl",
"894794/stls/DartHolderSideMount.stl",
"894794/stls/RailConnectorTopMount.stl"
] | CC-BY | https://www.printables.com/model/894794 | data_0045.tar |
1183319 | Parametric Open-Front Gridfinity Bins w/ Quick Swap Labels | <p><strong>This model is part of the gridfinity compatible swapfinity series. You can check out all compatible models </strong><a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.printables.com/@Kanelloupou/collections/2218776"><strong>in this collection.🔗</strong></a></p><p>&nb... | [
"parametric",
"organizer",
"free",
"organization",
"label",
"bin",
"grid",
"smallpartsstorage",
"parametrizable",
"partsorganizer",
"smallpartsorganizer",
"parametrized",
"bins",
"parametricdesign",
"openfront",
"gridfinity",
"gridfinitybin",
"swapfinity"
] | Hobby & Makers > Organizers | [
"1183319/images/image_1_compressed.jpg",
"1183319/images/image_2_compressed.jpg",
"1183319/images/image_3_compressed.jpg",
"1183319/images/image_4_compressed.jpg",
"1183319/images/image_5_compressed.jpg",
"1183319/images/image_6_compressed.jpg",
"1183319/images/image_7_compressed.jpg"
] | [
"1183319/stls/blank_label.stl",
"1183319/stls/open_front_swapfinity_bin_1x1x3_v0_1_1.stl",
"1183319/stls/open_front_swapfinity_bin_1x1x4_v0_1_1.stl",
"1183319/stls/open_front_swapfinity_bin_1x1x6_v0_1_1.stl",
"1183319/stls/open_front_swapfinity_bin_1x1x8_v0_1_1.stl",
"1183319/stls/open_front_swapfinity_bi... | GPL3.0 | https://www.printables.com/model/1183319 | data_0045.tar |
264950 | Parametric Paint Cones with Holes | <p>Simple paint cones with holes to tight them to the support. I added freecad's file where you can set cube's length (see picture). Don't forget units (mm or cm).</p><p>I printed four of them at 30mm with PETG / 0,2mm.</p><p>Inspired from <a href="https://www.thingiverse.com/thing:1213402">https://www.thingiverse.com/... | [
"parametric",
"support",
"customizable",
"paint",
"painting",
"freecad"
] | Hobby & Makers > Tools | [
"264950/images/image_1_compressed.jpg",
"264950/images/image_2_compressed.jpg",
"264950/images/image_3_compressed.jpg"
] | [
"264950/stls/10mm.stl",
"264950/stls/15mm.stl",
"264950/stls/20mm.stl",
"264950/stls/30mm.stl",
"264950/stls/40mm.stl",
"264950/stls/50mm.stl"
] | CC-BY | https://www.printables.com/model/264950 | data_0045.tar |
599299 | Parametric painting pyramids | <p>Use these to support objects you're painting, allowing you to paint both sides of the object without waiting for one side to dry. These are space saving too, as they are stackable!</p><p>Four sizes are provided:</p><ul><li>30mm (recommended for small objects, like a cutting board size)</li><li>45mm</li><li>60mm</li>... | [
"painting",
"thingiverse"
] | Art & Design > Other Art & Designs | [
"599299/images/image_1_compressed.jpg",
"599299/images/image_2_compressed.jpg",
"599299/images/image_3_compressed.jpg",
"599299/images/image_4_compressed.jpg",
"599299/images/image_5_compressed.jpg",
"599299/images/image_6_compressed.jpg",
"599299/images/image_7_compressed.jpg",
"599299/images/image_8... | [
"599299/stls/painting_pyramid_v1.0_size_30mm.stl",
"599299/stls/painting_pyramid_v1.0_size_45mm.stl",
"599299/stls/painting_pyramid_v1.0_size_60mm.stl",
"599299/stls/painting_pyramid_v1.0_size_90mm.stl"
] | CC0 | https://www.printables.com/model/599299 | data_0045.tar |
219970 | Parametric Pegboard Allen Wrench Organizer |
<p>I have a bin of Allen wrenches collected from various projects over the years. I decided to build this so I could identify their sizes and makes them easily accessible from my pegboard.</p>
<p>OpenSCAD files are included for both the horizontal shelf and vertical layout. All you need to do is modify the array of ... | [
"thingiverse",
"customizeable"
] | Hobby & Makers > Tools | [
"219970/images/image_1_compressed.jpg",
"219970/images/image_2_compressed.jpg",
"219970/images/image_3_compressed.jpg",
"219970/images/image_4_compressed.jpg"
] | [
"219970/stls/clip_modified.stl",
"219970/stls/horizontal_shelf.stl",
"219970/stls/vertical.stl"
] | CC-BY | https://www.printables.com/model/219970 | data_0045.tar |
1031636 | Parametric Playing Card Case (for Fusion 360) | <p>Included are some sample files - Cards Against Humanity - Australian Edition Question Cards, and one for a regular Queens Slipper card pack.<br><br>Prints should work with most rigid materials, might work with TPU but would be best with high-quality PLA or PETG.</p><p>Redesigned from the ground up, using Elias Rambo... | [
"box",
"card",
"case",
"cards",
"cardgame",
"cardcase",
"cardgames",
"boxwithlid",
"cardstorage",
"cardgameholder"
] | Toys & Games > Board Games | [
"1031636/images/image_1_compressed.jpg",
"1031636/images/image_2_compressed.jpg",
"1031636/images/image_3_compressed.jpg"
] | [
"1031636/stls/CAH Australian Edition Question Cards - Side A.stl",
"1031636/stls/CAH Australian Edition Question Cards - Side B.stl",
"1031636/stls/Queens Slipper Playing Cards - Side A.stl",
"1031636/stls/Queens Slipper Playing Cards - Side B.stl"
] | CC0 | https://www.printables.com/model/1031636 | data_0045.tar |
64920 | Parametric proximity card holder for lanyard | <p><strong>Update 2024-11-17:</strong> After ~3 years of near daily use, it broke. I've made a few subtle updates to the model that should both strengthen the fracture point, and clean up a model a bit.</p><p>I had used an older design daily for a year, before it broke. This new improved design should last much longer.... | [] | Household > Office | [
"64920/images/image_1_compressed.jpg"
] | [
"64920/stls/Badge holder.stl"
] | BSD | https://www.printables.com/model/64920 | data_0045.tar |
130461 | Parametric Seat tube or Seat post rack mount adapter | <p>Parametric FreeCAD design for a rack mount adapter to mount rack to either a seat tube or seat post. Internal edges are chamfered to be carbon fiber safe. I used PETG but ASA should work just as well. Designed for generic Amazon stainless M4 cap screws and nuts, but that's parametric too. Threaded hole is M5 t... | [
"rack",
"bike",
"mountingbracket"
] | Sports & Outdoor > Outdoor Sports | [
"130461/images/image_1_compressed.jpg",
"130461/images/image_2_compressed.jpg",
"130461/images/image_3_compressed.jpg"
] | [
"130461/stls/SeatPostRackMntParametric-Body.stl",
"130461/stls/SeatTubeRackMntParametric-Body.stl"
] | CC0 | https://www.printables.com/model/130461 | data_0045.tar |
606806 | Parametric Skadis Tray - T-Nut Mounting System | <p>Description is work in progress, will add that tomorrow (08th october).</p><p> </p><h3>Key Features:</h3><ul><li>Fully parametric</li><li>Most invalid values are getting automatically limited / rectified</li><li>Mounting hole horizontal position adjusts automatically (width is divided by 2, each hole gets one h... | [
"organizer",
"tray",
"skadis",
"skadisholder",
"skadistnut"
] | Hobby & Makers > Organizers | [
"606806/images/image_1_compressed.jpg",
"606806/images/image_2_compressed.jpg",
"606806/images/image_3_compressed.jpg",
"606806/images/image_4_compressed.jpg",
"606806/images/image_5_compressed.jpg",
"606806/images/image_6_compressed.jpg",
"606806/images/image_7_compressed.jpg"
] | [
"606806/stls/Skadis Tray - T-Nut Mounting System.stl",
"606806/stls/Skadis Tray With Cutout - T-Nut Mounting System.stl"
] | CC-BY | https://www.printables.com/model/606806 | data_0045.tar |
895555 | Parametric Suitcase Wheel (NOW WITH BEARINGS) | <p>As it's parametric, it can actually fit for a big range of suitcases. Mine is a Delsey one.<br><br>You should print two parts separately, the outer ring out of TPU, and the inner ring out of PETG or smth I dunno:)<br><br>100% Infill, the more perimeters, the better, but 5 is enough for me.<br><br><br><br>Happy print... | [
"parametric",
"wheel",
"suitcase",
"suitcasewheel"
] | Household > Other House Equipment | [
"895555/images/image_1_compressed.jpg",
"895555/images/image_2_compressed.jpg"
] | [
"895555/stls/Tire.stl",
"895555/stls/Weel.stl"
] | CC0 | https://www.printables.com/model/895555 | data_0045.tar |
1015581 | Parametric Switch Tester | <p>This is a parametric switch tester built on OnShape. It containt a top and bottom part but the bottom part is optional as the top part already contains enough space to add rubber feets if wanted. <br>If you feel the need to add the bottom part you will need to add M2*5*3.5 Heat Set Inserts (or shorter with the ... | [
"keyboard",
"mechanicalkeyboard",
"switchtester"
] | Gadgets > Computers | [
"1015581/images/image_1_compressed.jpg",
"1015581/images/image_2_compressed.jpg"
] | [
"1015581/stls/3x3 Switch Tester - Bottom.stl",
"1015581/stls/3x3 Switch Tester - Top.stl",
"1015581/stls/3x4 Switch Tester - Bottom.stl",
"1015581/stls/3x4 Switch Tester - Top.stl",
"1015581/stls/5x5 Switch Tester - Bottom.stl",
"1015581/stls/5x5 Switch Tester - Top.stl",
"1015581/stls/5x6 Switch Tester... | CC-BY | https://www.printables.com/model/1015581 | data_0045.tar |
38623 | Parametric wall/ceiling/desk mount for power supply | <p>When browsing for a mount for my Leicke 10A power supply for a LED project, I notices that none would fit.</p><p>So I designed this one. It is modeled after the mount from Legieps (<a href="https://www.thingiverse.com/thing:3801476">https://www.thingiverse.com/thing:3801476</a>), but it now is parametric, with only ... | [
"parametric",
"wall",
"desk",
"mount",
"powersupply",
"ceiling",
"powerbrick"
] | Hobby & Makers > Electronics | [
"38623/images/image_1_compressed.jpg",
"38623/images/image_2_compressed.jpg",
"38623/images/image_3_compressed.jpg"
] | [
"38623/stls/parametric-wall-ceiling-desk-mount-for-power-supp.stl"
] | CC0 | https://www.printables.com/model/38623 | data_0045.tar |
63311 | Parametrized mounting bracket for power brick | <p>The bracket in SLA file has some arbitrary dimensions I have used for one of the power bricks I wanted to mount from the bottom of my desk. Mounting is done using self-tapping screw. </p><p>Adjust dimensions according to the size of your own in Fusion 360. Everything can be changed including the size of screw.<... | [
"desk",
"bracket",
"powersupply",
"mounting",
"mountingbracket"
] | Hobby & Makers > Organizers | [
"63311/images/image_1_compressed.jpg",
"63311/images/image_2_compressed.jpg",
"63311/images/image_3_compressed.jpg",
"63311/images/image_4_compressed.jpg"
] | [
"63311/stls/bracket.stl"
] | CC-BY | https://www.printables.com/model/63311 | data_0045.tar |
1727583 | Parking Disk | <p>Print with every printer and change filament at the beginning of the letters</p> | [] | 3D Printers > Accessories | [
"1727583/images/image_1_compressed.jpg",
"1727583/images/image_2_compressed.jpg",
"1727583/images/image_3_compressed.jpg"
] | [
"1727583/stls/base to fit.stl",
"1727583/stls/top ATECA.stl",
"1727583/stls/top fiat.stl",
"1727583/stls/top PUMA.stl",
"1727583/stls/wheel.stl"
] | CC0 | https://www.printables.com/model/1727583 | data_0045.tar |
417638 | Parkside battery holder | Parkside battery holder for 20V Team | Download free 3D printable STL models | [
"holder",
"battery",
"parkside"
] | Hobby & Makers > Organizers | [
"417638/images/image_1_compressed.jpg",
"417638/images/image_2_compressed.jpg",
"417638/images/image_3_compressed.jpg",
"417638/images/image_4_compressed.jpg",
"417638/images/image_5_compressed.jpg"
] | [
"417638/stls/Suport Acumulator Parkside 20V Team v2.stl",
"417638/stls/Suport Acumulator Parkside 20V Team v3.stl",
"417638/stls/Suport Acumulator Parkside 20V Team.stl"
] | CC0 | https://www.printables.com/model/417638 | data_0045.tar |
986961 | Parkside Drawer Unit Small Part Organizer | <p>This is remixed version of an already existing small parts organizer for the Parkside Drawer Unit.</p><p>It essentially divides the single drawer space into 10 smaller containers. The original model, however, was too tall and wasted a lot of space in height. For most stuff that you wish to store, half the height is ... | [
"organizer",
"screws",
"nuts",
"storage",
"organization",
"tools",
"divider",
"bolts",
"parkside",
"drawer",
"smallpartsstorage",
"separator",
"standoffs",
"bins",
"drawerunit"
] | Hobby & Makers > Organizers | [
"986961/images/image_1_compressed.jpg",
"986961/images/image_2_compressed.jpg",
"986961/images/image_3_compressed.jpg",
"986961/images/image_4_compressed.jpg"
] | [
"986961/stls/ParksideSmallPartsSeparator10Half.stl"
] | CC-BY | https://www.printables.com/model/986961 | data_0045.tar |
1036118 | Parkside Vacuum Cleaner Wall Mount | <p>The mount contains 4x holes for 3 mm screws.</p><p>Print it upright, no supports needed. I recommend PETG with at least 1 mm of perimeters.</p> | [
"wall",
"mount",
"vacuum",
"parkside"
] | Household > Other House Equipment | [
"1036118/images/image_1_compressed.jpg",
"1036118/images/image_2_compressed.jpg",
"1036118/images/image_3_compressed.jpg"
] | [
"1036118/stls/parkside_vacuum_wall_mount.stl"
] | CC-BY | https://www.printables.com/model/1036118 | data_0045.tar |
504303 | Parkside X20V battery wall mount (QUICK) | <p>I started to learn the very basics of 3D design so I thought designing my own X20V battery wall mount can be a nice little project.</p><p>One thing I've noticed checking out other models is that they seem to be completly overengineered. The one I used before took 3+ hours to print and uses 12m+ filament and one of t... | [
"wallmount",
"parkside",
"x20v"
] | Hobby & Makers > Tools | [
"504303/images/image_1_compressed.jpg"
] | [
"504303/stls/X20V wall mount v6.stl"
] | GPL2.0 | https://www.printables.com/model/504303 | data_0045.tar |
1144935 | Parts Holder for Massca Pro Pocket Hole Jig M2 | <p>This model holds everything that comes with the “<strong>Massca Pro Aluminum Pocket Hole Jig System M2</strong>"<strong> </strong>product. The design intent was to hold all parts and lock in the holder with the jig's clamping force set to a ¾" (19mm) thick board. Once the parts are loaded into the holder... | [
"woodworkingaccessories"
] | Hobby & Makers > Organizers | [
"1144935/images/image_1_compressed.jpg",
"1144935/images/image_2_compressed.jpg",
"1144935/images/image_3_compressed.jpg",
"1144935/images/image_4_compressed.jpg",
"1144935/images/image_5_compressed.jpg"
] | [
"1144935/stls/Massca M2 Jig Holder v4.stl"
] | CC-BY | https://www.printables.com/model/1144935 | data_0045.tar |
14762 | Party Ogre! | <p>ITS TIME TO PARTY! Unleash this fun NPC on your game and bring a boozy side quest to your party! Did bandits steal his booze? Does he need help setting up a kickass party? The options are limitless!</p>
<p>Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making fr... | [
"beer",
"party",
"dnd",
"giant",
"fun",
"troll",
"pathfinder",
"thingiverse",
"ogre",
"booze",
"whiskey"
] | Toys & Games > Board Games | [
"14762/images/image_1_compressed.jpg",
"14762/images/image_10_compressed.jpg",
"14762/images/image_11_compressed.jpg",
"14762/images/image_2_compressed.jpg",
"14762/images/image_3_compressed.jpg",
"14762/images/image_4_compressed.jpg",
"14762/images/image_5_compressed.jpg",
"14762/images/image_6_compr... | [
"14762/stls/party_ogre.stl"
] | CC-BY | https://www.printables.com/model/14762 | data_0045.tar |
186692 | Passthrough PC4-M10 MMU Filament Sensor Cover | <p>This is a remix of ChapinDesignSolutions' PC4-M10 connector for the fs cover. I added a 4.3mm path for passing the ptfe tube through as well as a taper wider at the top so the ptfe tube can be removed more easily for maintenance.</p><p>Also included is the adapter printer with a 4.2mm path to hold the end of the ptf... | [
"prusa",
"mmu",
"mmu2s",
"ptfe",
"prusai3mk3s",
"pc4m10"
] | 3D Printers > Prusa Parts & Upgrades | [
"186692/images/image_1_compressed.jpg",
"186692/images/image_2_compressed.jpg",
"186692/images/image_3_compressed.jpg",
"186692/images/image_4_compressed.jpg",
"186692/images/image_5_compressed.jpg"
] | [
"186692/stls/adapter-printer-mmu2s-mk3sp-r6-passthrough.stl",
"186692/stls/adapter-printer-mmu2s_MK3S+.stl",
"186692/stls/fs-cover-mmu2s-m10-passthrough.stl",
"186692/stls/fs-cover-mmu2s-PC4-M10-non-passthrough-repaired.stl"
] | GPL2.0 | https://www.printables.com/model/186692 | data_0045.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.