model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
502964 | Pocket Watch Stand for the desktop | <p>I needed an angled stand for my old pocket watch, so that it could stand on my desktop facing me while working :-) </p><p>Round part of the stand is 50 mm. Stand is angled 35 degress backwards. </p><p> </p><p>I printed it with:</p><p>0.1 mm layer height </p><p>30% cubic in-fill</p><p> </p><p... | [
"holder",
"desktop",
"stand",
"watch",
"pocket",
"angled"
] | Hobby & Makers > Other Ideas | [
"502964/images/image_1_compressed.jpg",
"502964/images/image_2_compressed.jpg"
] | [
"502964/stls/PocketWatchHolderV1.stl"
] | CC0 | https://www.printables.com/model/502964 | data_0046.tar |
1148363 | Pod Carousel 40 - Rotating Nespresso Pod Holder 40 pods | <h3><strong>Pod carousel 40 - Coffee Pod Holder for 40 Nespresso Pods</strong></h3><p>V3 improved stability and strength, smoother rotation and a locking bolt so it can be lifted and moved easily.</p><p>Holds 4 columns of 10 pods.</p><p>Prints in four parts without supports. The Base, The Lower Half, The Top Half and t... | [
"stand",
"coffee",
"capsule",
"pod",
"nespresso",
"podholder",
"coffeepodholder",
"risteretto",
"podstand",
"nespresso40"
] | Household > Kitchen | [
"1148363/images/image_1_compressed.jpg",
"1148363/images/image_10_compressed.jpg",
"1148363/images/image_2_compressed.jpg",
"1148363/images/image_3_compressed.jpg",
"1148363/images/image_4_compressed.jpg",
"1148363/images/image_5_compressed.jpg",
"1148363/images/image_6_compressed.jpg",
"1148363/image... | [
"1148363/stls/Pod Carousel - Nespresso Base Bolt.stl",
"1148363/stls/Pod Carousel 40 - Nespresso 40 Pod Tower Upper.stl",
"1148363/stls/Pod Carousel 40 - Nespresso 40 pod Base.stl",
"1148363/stls/Pod Carousel 40 - Nespresso 40 pod Tower Lower.stl"
] | CC-BY | https://www.printables.com/model/1148363 | data_0046.tar |
103220 | Pod Lid & Spoon Rest | <h4>The stand is designed to place the lid and the kitchen appliance (spoon/ladle/spatula) during cooking.</h4>
<h4>Thanks to the recesses, the drops from your lid from the pan will not fall on the table. Suitable for any size.</h4>
<p>For a satisfactory result, use the <a href="https://www.prusa3d.com/prusaslicer/">Pr... | [
"kitchen",
"holder",
"lid",
"stand",
"spoon",
"pod",
"thingiverse",
"rest"
] | Household > Kitchen | [
"103220/images/image_1_compressed.jpg",
"103220/images/image_2_compressed.jpg",
"103220/images/image_3_compressed.jpg",
"103220/images/image_4_compressed.jpg"
] | [
"103220/stls/Lidstand.stl"
] | CC-BY | https://www.printables.com/model/103220 | data_0046.tar |
301066 | Podpera autodráhy Shadow | <p>Doplnenie háčika na poškodenú podperu autodráhy Shadow</p><p>Replacement of the hook for the damaged support of the Shadow track</p> | [
"toy",
"repair",
"auto",
"repairpart"
] | Toys & Games > Board Games | [
"301066/images/image_1_compressed.jpg",
"301066/images/image_2_compressed.jpg",
"301066/images/image_3_compressed.jpg",
"301066/images/image_4_compressed.jpg",
"301066/images/image_5_compressed.jpg"
] | [
"301066/stls/hacik.stl"
] | CC0 | https://www.printables.com/model/301066 | data_0046.tar |
316443 | Pokeball Keychain | <p>I achieve the color change you see in the pics by pausing and changing the filament. The strap I bought from online. <br><br>Disclaimer : I am aware that my model is very similar to ar3Dprints design, but I assure you I have no idea he made something similar. I simply wanted a pokeball keychain.<br><br>Don't he... | [
"pokemon",
"pokeball",
"quickprint",
"keychain"
] | Art & Design > 2D Plates & Logos | [
"316443/images/image_1_compressed.jpg"
] | [
"316443/stls/Pokeball keychain v4.stl"
] | CC-BY | https://www.printables.com/model/316443 | data_0046.tar |
314789 | pokeball tripod stand | <p>Here a tripod for Scotland's pokeball https://www.printables.com/fr/model/67708-pokeball-remix/comments/451699#</p> | [
"stand",
"pokeball",
"tripod"
] | Costumes & Accessories > Props | [
"314789/images/image_1_compressed.jpg",
"314789/images/image_2_compressed.jpg"
] | [
"314789/stls/tripod pokeball.stl"
] | CC0 | https://www.printables.com/model/314789 | data_0046.tar |
499913 | Pokemon Box / Caja Pokemon | <p>This box was one of my first designs. It is decorated with the Pokemon logo and is just the right size to hold the famous cards from this series.</p><p>………………………………………………………..</p><p>Esta caja fue uno de mis primeros diseños. Está decorada con el logo de Pokemon y tiene el tamaño justo para guardar las famosas cartas... | [
"box",
"pokemon",
"cards"
] | Toys & Games > Other Toys & Games | [
"499913/images/image_1_compressed.jpg",
"499913/images/image_2_compressed.jpg",
"499913/images/image_3_compressed.jpg"
] | [
"499913/stls/BaseCaja.stl",
"499913/stls/BolaCentro.stl",
"499913/stls/BolaInf.stl",
"499913/stls/BolaSup.stl",
"499913/stls/Pokemon.stl",
"499913/stls/TapaSup.stl"
] | CC0 | https://www.printables.com/model/499913 | data_0046.tar |
255522 | Pokemon Cookie Cutters - 3.5" Tall | <p>I made this because I sell cookie cutters to people in my area. For the longest time I made them without putting them up on here so I Thought I finnaly should do this for others who might want them so here you go.</p> | [] | Household > Kitchen | [
"255522/images/image_1_compressed.jpg"
] | [
"255522/stls/Poke 1.stl",
"255522/stls/Poke 2.stl",
"255522/stls/Poke 3.stl"
] | CC0 | https://www.printables.com/model/255522 | data_0046.tar |
168205 | Pokemon Easter Egg - Bulbasaur | <p>This is just one of the 17 Pokemon Easter Eggs I have released for my current Patrons for the month of March. You can find Bulbasaur, Charmander, Dratini, Gengar, Growlithe, Jigglypuff, Poke-Egg, Squirtle, Exeggcute, Lucario, Magikarp, Magmar, Poliwag, Rowlet, Slowpoke, Snorlax, and Togepi Egg.</p><p>You can print t... | [
"pokemon",
"bulbasaur",
"easter",
"easteregg",
"thingiverse",
"nosupport"
] | Hobby & Makers > Other Ideas | [
"168205/images/image_1_compressed.jpg",
"168205/images/image_2_compressed.jpg",
"168205/images/image_3_compressed.jpg",
"168205/images/image_4_compressed.jpg",
"168205/images/image_5_compressed.jpg"
] | [
"168205/stls/Bulbasaur-Bot.stl",
"168205/stls/Bulbasaur-Top.stl"
] | CC-BY | https://www.printables.com/model/168205 | data_0046.tar |
143017 | Pokemon Go Ball |
<p>This is a 40mm Pokemon Ball key chain. I tried to scale others, but there are issues when scaling and thin walls, so I just decided to create one myself at the size I wanted. Feel free to use anyway you like.</p>
<p>Printed in PLA on Prusa I3 .3mm layers</p>
<p>Parts are separate so you can print with different c... | [
"pokemon",
"pokeball",
"keychain",
"pokemongo",
"thingiverse"
] | Toys & Games > Outdoor Toys | [
"143017/images/image_1_compressed.jpg",
"143017/images/image_2_compressed.jpg",
"143017/images/image_3_compressed.jpg",
"143017/images/image_4_compressed.jpg"
] | [
"143017/stls/pokeball_center_ring.stl",
"143017/stls/pokeball_half_moon.stl",
"143017/stls/pokeball_shell.stl"
] | CC-BY | https://www.printables.com/model/143017 | data_0046.tar |
364620 | Pokemon inspired, Paldean Wooper, Tabletop DnD miniature | <p>IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at <a href="https://www.patreon.com/pixelchronicles">https://www.patreon.com/pixelchronicles</a>!</p><p>Pokemon inspired, Paldean Wooper, Tabletop DnD miniature</p><p>20 mm small base which can be used for DnD and other Tabletops.</p> | [
"pokemon",
"videogame",
"dnd",
"tabletop",
"tabletoprpg",
"quagsire",
"wooper",
"clodsire",
"paldean",
"paldeanwooper"
] | Tabletop Miniatures > Characters & Monsters | [
"364620/images/image_1_compressed.jpg"
] | [
"364620/stls/Paldean Wooper.stl"
] | CC-BY | https://www.printables.com/model/364620 | data_0046.tar |
330581 | Pokemon inspired, Torterra, Tabletop DnD miniature | <p>IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at <a href="https://www.patreon.com/pixelchronicles">https://www.patreon.com/pixelchronicles</a>!</p><p>Pokemon inspired, Torterra, Tabletop DnD miniature</p><p>50 mm Large base which can be used for DnD and other Tabletops.</p> | [
"pokemon",
"videogame",
"dnd",
"tabletop",
"turtle",
"tortoise",
"tabletoprpg",
"torterra"
] | Tabletop Miniatures > Characters & Monsters | [
"330581/images/image_1_compressed.jpg",
"330581/images/image_2_compressed.jpg"
] | [
"330581/stls/Torterra.stl"
] | CC-BY | https://www.printables.com/model/330581 | data_0046.tar |
97465 | Pokemon Team Rocket Ornament | <p>I made the to go on our Pokemon themed Christmas tree. Printed on a Prusa MK3S+ with .3 layer height. Supports are needed but are very minimal.</p> | [
"pokemon",
"christmasornament",
"teamrocket"
] | Seasonal designs > Winter & Christmas & New Year's | [
"97465/images/image_1_compressed.jpg"
] | [
"97465/stls/Team Rocket Ornament.stl"
] | GPL2.0 | https://www.printables.com/model/97465 | data_0046.tar |
156231 | Poker Card Guard | <h4>Description</h4><p>This is a Poker Card Guard that you can put your cards under to indicate you're still in the game. It features a spade on top and the text “ALL IN” on the bottom.</p><p>It can be printed in dual colors by manually swapping between two different filaments at specific layers during print. I used Pr... | [] | Toys & Games > Other Toys & Games | [
"156231/images/image_1_compressed.jpg",
"156231/images/image_2_compressed.jpg"
] | [
"156231/stls/Card Guard.stl"
] | CC0 | https://www.printables.com/model/156231 | data_0046.tar |
371835 | Poker case | <p>This model is made to hold 4 stacks of 25 chips and a standard deck of 52 or 54 cards. It is also possible to place the dealer's chip on top of one of the stacks of chips.</p><p>I suggest printing using PLA with 15% infill, 0.6mm nozzle, and a 0.32mm line height.</p> | [
"case",
"storage",
"poker",
"playingcards"
] | Toys & Games > Other Toys & Games | [
"371835/images/image_1_compressed.jpg"
] | [
"371835/stls/poker-case.stl"
] | CC-BY | https://www.printables.com/model/371835 | data_0046.tar |
1393082 | PokéBall Pencil Holder | <p>This PokéBall-inspired pencil holder is split into separate parts for easy multi-color printing. The button is printed as a standalone piece and should be glued on after printing. The model is designed for three-color printing — either by manually swapping filament at specific layers or using multi-material systems ... | [
"decoration",
"organizer",
"holder",
"desk",
"multicolor",
"pokemon",
"fanart",
"pokeball",
"kids",
"pencils",
"crayons"
] | Household > Office | [
"1393082/images/image_1_compressed.jpg",
"1393082/images/image_2_compressed.jpg",
"1393082/images/image_3_compressed.jpg",
"1393082/images/image_4_compressed.jpg",
"1393082/images/image_5_compressed.jpg",
"1393082/images/image_6_compressed.jpg",
"1393082/images/image_7_compressed.jpg",
"1393082/images... | [
"1393082/stls/Pokeball holder button.stl",
"1393082/stls/Pokeball holder.stl",
"1393082/stls/PS Pokeball pencils holder.stl"
] | CC-BY | https://www.printables.com/model/1393082 | data_0046.tar |
814948 | Polar Bear / polar baer voronoi | [
"animal",
"voronoi",
"bear",
"polar"
] | World & Scans > Animals | [
"814948/images/image_1_compressed.jpg",
"814948/images/image_2_compressed.jpg"
] | [
"814948/stls/Polarbear voronoi.stl",
"814948/stls/PolarBear.stl"
] | CC0 | https://www.printables.com/model/814948 | data_0046.tar | |
1187470 | Polar fine adjustment unit v2 | <p>Polar fine adjustment unit <strong>v2</strong></p><ul><li><strong>Camera tripod support</strong></li><li><strong>ZWO AM3, AM5 mount hole compatible.</strong></li></ul><p> </p><p>*Some hexagon nuts are made tight to prevent them from slipping off.</p><p>In that case, you can easily insert it by placing a hexagon... | [
"telescopeadapter",
"telescopemount",
"equatorial",
"equatorialmount"
] | Learning > Physics & Astronomy | [
"1187470/images/image_1_compressed.jpg",
"1187470/images/image_10_compressed.jpg",
"1187470/images/image_11_compressed.jpg",
"1187470/images/image_12_compressed.jpg",
"1187470/images/image_13_compressed.jpg",
"1187470/images/image_14_compressed.jpg",
"1187470/images/image_15_compressed.jpg",
"1187470/... | [
"1187470/stls/bottom_bottom_v2.stl",
"1187470/stls/bottom_cover.stl",
"1187470/stls/bottom_cover_washer.stl",
"1187470/stls/bottom_worm.stl",
"1187470/stls/bottom_worm_handle_x1_2.stl",
"1187470/stls/bottom_worm_washer_x1_2.stl",
"1187470/stls/bottom_worm_wheel_v2.stl",
"1187470/stls/middle_bearing_sp... | CC-BY | https://www.printables.com/model/1187470 | data_0046.tar |
310620 | Polaroid now lens cap | <p>A strong lens cap for the Polaroid Now with a 3mm wall thickness all around.</p> | [
"lenscap",
"polaroid",
"polaroidnow",
"polaroidnowlenscap",
"polaroidlenscap"
] | Gadgets > Photo & Video | [
"310620/images/image_1_compressed.jpg",
"310620/images/image_2_compressed.jpg",
"310620/images/image_3_compressed.jpg",
"310620/images/image_4_compressed.jpg"
] | [
"310620/stls/Lens cap.stl",
"310620/stls/Lens_cap_butterfly.stl"
] | CC-BY | https://www.printables.com/model/310620 | data_0046.tar |
1181028 | Polishing rig for guitar frets - stratocaster/telecaster standard width | <p>I made a new rig because the other ones were too wide and would risk damaging the wood when polishing with a rotary tool or steel wool. <br><br>Modelled after a fender strat, fender tele and a squier strat.</p><p> </p><p>I suggest printing these in PETG for heatresistance to prevent warping.</p> | [
"guitar",
"fender",
"electric",
"ibanez",
"polishing",
"acousticguitar",
"fenderstratocaster",
"telecaster",
"squier",
"acoustic",
"stratocaster",
"fendertelecaster",
"frets",
"fretpolishing",
"guitarfrets"
] | Hobby & Makers > Music | [
"1181028/images/image_1_compressed.jpg"
] | [
"1181028/stls/fret polishers.stl"
] | CC-BY | https://www.printables.com/model/1181028 | data_0046.tar |
162508 | Polybox PTFE M10 adapter | <ul><li>Uses a 3mm hole to allow filament to pass through</li><li>Uses an M11x1.5, found this to be the best when screwing in an m10x1.5</li><li>Contains the fusion360 files for use with other thread types</li></ul> | [
"ptfe",
"connector",
"polybox"
] | 3D Printers > Accessories | [
"162508/images/image_1_compressed.jpg",
"162508/images/image_2_compressed.jpg",
"162508/images/image_3_compressed.jpg",
"162508/images/image_4_compressed.jpg"
] | [
"162508/stls/polybox_bottom.stl",
"162508/stls/polybox_top.stl"
] | CC-BY | https://www.printables.com/model/162508 | data_0046.tar |
1212948 | Polydryer Snapdryer Airflow diverter | <p><strong>***Remix file uploaded*** ***Version2***</strong></p><p>Airflow diverter to force airflow upward to the spool. There is about a 15 mm gap under the rollers that doesn't do much for drying, so I made a diverter to force warmed air upwards to the spool (not under the roller). I only put mine on th... | [
"diverter",
"polydryer",
"snapdryer",
"aiflow"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1212948/images/image_1_compressed.jpg",
"1212948/images/image_2_compressed.jpg",
"1212948/images/image_3_compressed.jpg"
] | [
"1212948/stls/flowdiverter.stl"
] | CC-BY | https://www.printables.com/model/1212948 | data_0046.tar |
1147214 | Polydryer Stack | [] | 3D Printers > Accessories | [
"1147214/images/image_1_compressed.jpg",
"1147214/images/image_2_compressed.jpg"
] | [
"1147214/stls/Polydryer v8.stl"
] | CC0 | https://www.printables.com/model/1147214 | data_0046.tar | |
1537410 | Polygon fidgets - fully customizable (triangle/square/pentagon/hexagon/heptagon/octagon/nonagon/etc) | <p>A fully parametric polygon fidget.</p><h3>Printing tips:</h3><ul><li><p>Decrease the printing speed</p></li><li><p>Decrease the cooling fan's speed</p></li><li><p>For a robust handle use 3 walls</p></li><li><p><strong>Ensure a good bed adhesion</strong></p></li></ul><h3>How to customize your own?</h3><p>You will nee... | [
"toy",
"hexagon",
"parametric",
"triangle",
"polygon",
"fidget",
"fidgettoy",
"pentagon",
"freecad",
"customize",
"customized",
"octagon",
"square",
"heptagon",
"nonagon",
"customizeable"
] | Toys & Games > Other Toys & Games | [
"1537410/images/image_1_compressed.jpg",
"1537410/images/image_2_compressed.jpg",
"1537410/images/image_3_compressed.jpg",
"1537410/images/image_4_compressed.jpg",
"1537410/images/image_5_compressed.jpg",
"1537410/images/image_6_compressed.jpg"
] | [
"1537410/stls/InsideOut_PentagonFidget.stl",
"1537410/stls/MediumHeptagon_WithHandle.stl",
"1537410/stls/MediumHexagon_WithHandle.stl",
"1537410/stls/MediumPentagon_WithHandle.stl",
"1537410/stls/MediumSquare_WithHandle.stl",
"1537410/stls/MediumTriangle_WithHandle.stl",
"1537410/stls/SmallHeptagon_NoHa... | GPL3.0 | https://www.printables.com/model/1537410 | data_0046.tar |
179841 | Polyhedron Connectors |
<p>Used Fusion360 to determine the angles needed to modify Bob_East's SCAD file to produce connectors for other polyhedrons.</p>
<p>I've included: Tetrahedron (4 faces), Hexahedron (Cube - 6 faces), Tetratetrahedron (regular octahedron - 8 faces), Dodecahedron (12 faces) and a copy of Bob_East's Icosahedron (20 face... | [
"geometry",
"model",
"math",
"thingiverse",
"3dgeometry"
] | Art & Design > Sculptures | [
"179841/images/image_1_compressed.jpg",
"179841/images/image_10_compressed.jpg",
"179841/images/image_11_compressed.jpg",
"179841/images/image_12_compressed.jpg",
"179841/images/image_13_compressed.jpg",
"179841/images/image_14_compressed.jpg",
"179841/images/image_15_compressed.jpg",
"179841/images/i... | [
"179841/stls/DodecConnector2.stl",
"179841/stls/HexConnector.stl",
"179841/stls/IcosConnector.stl",
"179841/stls/TetratetrConnector.stl",
"179841/stls/TetrConnector.stl"
] | CC-BY | https://www.printables.com/model/179841 | data_0046.tar |
331971 | Polymaker Cardboard to Bambu Spool Adapter | <p>UPDATE - Added v14 model in which I have made some minor tolerance improvements based on a few dozen more polymaker spools. </p><p>First I use a small piece of blue painters tape and secure the end of the filament flat to the filament winding. Next I pull one cardboard side off of the spool. I clear away the sp... | [] | 3D Printers > Accessories | [
"331971/images/image_1_compressed.jpg",
"331971/images/image_2_compressed.jpg",
"331971/images/image_3_compressed.jpg",
"331971/images/image_4_compressed.jpg",
"331971/images/image_5_compressed.jpg",
"331971/images/image_6_compressed.jpg",
"331971/images/image_7_compressed.jpg"
] | [
"331971/stls/PM to BL Spool Adapter v14.stl",
"331971/stls/PM to BL Spool Adapter v9.stl"
] | CC0 | https://www.printables.com/model/331971 | data_0046.tar |
504241 | Polymaker Mad Hat | <p>Polymaker Mad Hat designed by Greath from our Discord community:<br><a href="https://discord.polymaker.com/">https://discord.polymaker.com/</a><br><br>Printable in vase mode, how fast can you print one which can fit you?</p> | [
"hat",
"polymaker"
] | Costumes & Accessories > Cosplay & Costumes in general | [
"504241/images/image_1_compressed.jpg",
"504241/images/image_2_compressed.jpg",
"504241/images/image_3_compressed.jpg"
] | [
"504241/stls/Polymaker Mad Hat.stl"
] | GPL2.0 | https://www.printables.com/model/504241 | data_0046.tar |
184404 | Pomeranian Cookie Cutter |
<p>I received a request for a Pomeranian Cookie Cutter. I don't know why I haven't made one yet, but here you go.</p>
<p>I've been meaning to post a third set of doggie cookie cutters, but for now I'll just continue to post new ones, one at a time.</p>
<p>As always I am including a copy of my basic "Sugar Cookie Dou... | [
"kitchen",
"cookie",
"thingiverse",
"pomeranian"
] | Hobby & Makers > Other Ideas | [
"184404/images/image_1_compressed.jpg",
"184404/images/image_2_compressed.jpg",
"184404/images/image_3_compressed.jpg",
"184404/images/image_4_compressed.jpg",
"184404/images/image_5_compressed.jpg"
] | [
"184404/stls/Pomeranian.stl",
"184404/stls/Pomeranian_2.stl"
] | CC-BY | https://www.printables.com/model/184404 | data_0046.tar |
952194 | Pool fountain | <p>Hi, this is a pool fountain you can plug into your pool outlet.</p><p>You can change nozzles as you want, thread is M30x3</p><p>Video: </p><figure class="media"><oembed url="https://youtu.be/bLt3JfNBhIk"></oembed></figure><p>Note #1: It is ment to plug into outlet hole with plastic that is left when outlet guar... | [
"pool",
"fountain",
"poolfountain"
] | Hobby & Makers > Other Ideas | [
"952194/images/image_1_compressed.jpg",
"952194/images/image_2_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/952194 | data_0046.tar |
499665 | pool hose holder 30mm bis 40mm | easy to print without support with PLA | Download free 3D printable STL models | [] | Household > Outdoor & Garden | [
"499665/images/image_1_compressed.jpg",
"499665/images/image_2_compressed.jpg",
"499665/images/image_3_compressed.jpg"
] | [
"499665/stls/pool hose holder.stl"
] | CC0 | https://www.printables.com/model/499665 | data_0046.tar |
261265 | Pool pole holder | <p>This is a holder for you pool net, poles for above ground pools with 2" frame poles.</p> | [
"holder",
"net"
] | Household > Outdoor & Garden | [
"261265/images/image_1_compressed.jpg"
] | [
"261265/stls/Pole_Holder.stl"
] | CC0 | https://www.printables.com/model/261265 | data_0046.tar |
1133022 | Poop bin for SV08 | <p>This little bin is made for the SV08 whenever it poops during a filament swap. I recommend printing it in a high temp material such as ABS to prevent the excess filament sticking to the bin.<br><br>EDIT: added an improved version with thicker walls after some feedback, and I also made one that will fit with the buil... | [
"sv08",
"sovolsv08"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1133022/images/image_1_compressed.jpg"
] | [
"1133022/stls/sv08 poop chute build plate clips.stl",
"1133022/stls/sv08 poop chute- improved.stl",
"1133022/stls/sv08 poop chute.stl"
] | CC-BY | https://www.printables.com/model/1133022 | data_0046.tar |
226716 | Poop Deck | [] | Household > Bathroom | [
"226716/images/image_1_compressed.jpg",
"226716/images/image_2_compressed.jpg"
] | [
"226716/stls/poop_deck_sign_ v2.stl"
] | CC-BY | https://www.printables.com/model/226716 | data_0046.tar | |
212070 | Poop Emoji Trophy | [
"trophy",
"poop",
"emoji"
] | Art & Design > Other Art & Designs | [
"212070/images/image_1_compressed.jpg"
] | [
"212070/stls/Poop Emoji Trophy.stl"
] | CC-BY | https://www.printables.com/model/212070 | data_0046.tar | |
29981 | Pop Can Thermos | <p>The pop can thermos keeps drinks hot and cold. Show off your 3D printed thermos to your family and friends. Use a can opener to reuse old cans to drink coffee with the printable handle option. Utilizing Prusa's modifier mesh, the thermal insulator slows down and traps heat. Wrapping the Insulator with aluminum foil ... | [
"everydaylifenecessities"
] | Seasonal designs > Summer | [
"29981/images/image_1_compressed.jpg",
"29981/images/image_2_compressed.jpg",
"29981/images/image_3_compressed.jpg",
"29981/images/image_4_compressed.jpg",
"29981/images/image_5_compressed.jpg",
"29981/images/image_6_compressed.jpg",
"29981/images/image_7_compressed.jpg"
] | [
"29981/stls/cap-with-handle.stl",
"29981/stls/cap.stl",
"29981/stls/outer-shell.stl",
"29981/stls/thermal-insulator.stl"
] | CC0 | https://www.printables.com/model/29981 | data_0046.tar |
7000 | Porg | <p>I absolutely loved this little character from the most recent Star Wars trailer that I wanted to make one to have sitting on my desk. I created the model using ZBrush. After printing, I hit it with successive steps of standing, some XTC-3D, more sanding, primer, and then using some acrylic paints over the top.</p>
<... | [
"starwars",
"creature",
"porg",
"thingiverse"
] | Toys & Games > Action Figures & Statues | [
"7000/images/image_1_compressed.jpg",
"7000/images/image_2_compressed.jpg",
"7000/images/image_3_compressed.jpg"
] | [
"7000/stls/porg.stl"
] | CC-BY | https://www.printables.com/model/7000 | data_0046.tar |
464129 | Porsche Boxster 987 Convertible Top Transmission Worm Gears | <p>Porsche Boxster 987 convertible top transmission worm gears occasionally break due to age and/or excessive strain due to malfunctions. I have designed a replacement. Left and right gears are slightly different. Mirroring one gear in the slicer will not work.</p><p>Print for strength with CF reinforced plastics.</p><... | [
"gears",
"porsche",
"boxster",
"987"
] | Hobby & Makers > Automotive | [
"464129/images/image_1_compressed.jpg",
"464129/images/image_2_compressed.jpg",
"464129/images/image_3_compressed.jpg"
] | [
"464129/stls/spur_gear_for_porsche_convertible_top_transmission_left.stl",
"464129/stls/spur_gear_for_porsche_convertible_top_transmission_right.stl"
] | CC-BY | https://www.printables.com/model/464129 | data_0046.tar |
527562 | Porsche Key Holder / Stand | Porsche Key Holder or Stand.
3 Separated files. Crazy Glue Req.
Willing to mod as per your request. | Download free 3D printable STL models | [] | Hobby & Makers > Automotive | [
"527562/images/image_1_compressed.jpg",
"527562/images/image_2_compressed.jpg",
"527562/images/image_3_compressed.jpg",
"527562/images/image_4_compressed.jpg",
"527562/images/image_5_compressed.jpg"
] | [
"527562/stls/Key Base.stl",
"527562/stls/Key Frame.stl",
"527562/stls/Key Holder.stl"
] | CC-BY | https://www.printables.com/model/527562 | data_0046.tar |
1648913 | Porsche Sculpture | [
"car",
"porsche",
"911",
"911gt3"
] | Hobby & Makers > Automotive | [
"1648913/images/image_1_compressed.jpg"
] | [
"1648913/stls/911InspiredV16.stl"
] | CC-BY | https://www.printables.com/model/1648913 | data_0046.tar | |
1113213 | Porta Fusible Automotriz para Terminal Aislada | <p>Este diseño es un porta fusible tipo automotriz, ideal para aplicaciones eléctricas que requieren conexiones seguras y duraderas. Diseñado específicamente para terminales aisladas y cables calibre 14-10 AWG, este modelo destaca por:<br>• Visor integrado: Permite inspeccionar visualmente el estado del fusible sin nec... | [
"terminal",
"electronica",
"fusible",
"autos",
"motos",
"mecanica"
] | Hobby & Makers > Automotive | [
"1113213/images/image_1_compressed.jpg",
"1113213/images/image_2_compressed.jpg",
"1113213/images/image_3_compressed.jpg"
] | [
"1113213/stls/PortaFusibleHembra.stl",
"1113213/stls/PortaFusibleMacho.stl"
] | CC-BY | https://www.printables.com/model/1113213 | data_0046.tar |
927220 | Portable Air Conditioner Window Seal | <figure class="media"><oembed url="https://youtu.be/HeeoYwNHvr4"></oembed></figure><p><strong>Bu projede taşınabilir klimaların PVC pencerelere kapak tasarımı yer alır.</strong><br><strong>Malzeme Listesi</strong><br>M3x12 6 Adet<br>M3 Somun<br>M5x12 İmbus 9 Adet<br>M5 Somun 9 Adet<br>Pencere ölçüsünde (kalınlık 4mm) M... | [
"air",
"portable",
"conditioner"
] | 3D Printers > Accessories | [
"927220/images/image_1_compressed.jpg",
"927220/images/image_2_compressed.jpg"
] | [
"927220/stls/Hortum_tutma_V2.stl",
"927220/stls/Hortum_ust_oynar_kilit_V1.stl",
"927220/stls/sag_kilit_V1.stl",
"927220/stls/sol_kilit_V1.stl",
"927220/stls/tutma_parca_V1.stl"
] | CC0 | https://www.printables.com/model/927220 | data_0046.tar |
832948 | Portable Monitor Holder | <p>Made a small and lightweight monitor stand for my 15" external Azorpa Monitor, the lip at the bottom is made for monitors up to 1cm thick.</p> | [
"monitorstand",
"arzopa",
"externalmonitor"
] | Household > Office | [
"832948/images/image_1_compressed.jpg",
"832948/images/image_2_compressed.jpg",
"832948/images/image_3_compressed.jpg"
] | [
"832948/stls/Portable_Monitor_Holder.stl"
] | CC-BY | https://www.printables.com/model/832948 | data_0046.tar |
560623 | Portable Office | <p>Who has an office these days? Keep all of your bits and bobs with you as you move from worksite to worksite. This compact organizer features:</p><ul><li>Work phone storage (95 x 168 x 15mm)</li><li>Phone stand / storage cover</li><li>Credit card / money / business card slots</li><li>MicroSD card slots (4x)</li><li>M... | [
"organizer"
] | Household > Office | [
"560623/images/image_1_compressed.jpg",
"560623/images/image_2_compressed.jpg",
"560623/images/image_3_compressed.jpg",
"560623/images/image_4_compressed.jpg",
"560623/images/image_5_compressed.jpg",
"560623/images/image_6_compressed.jpg",
"560623/images/image_7_compressed.jpg",
"560623/images/image_8... | [
"560623/stls/PortaOffice-Clip.stl",
"560623/stls/PortaOffice-Flap.stl",
"560623/stls/PortaOffice-Latch.stl",
"560623/stls/PortaOffice-Left-Empty.stl",
"560623/stls/PortaOffice-Left.stl",
"560623/stls/PortaOffice-PhoneCover.stl",
"560623/stls/PortaOffice-Right-Empty.stl",
"560623/stls/PortaOffice-Right... | CC0 | https://www.printables.com/model/560623 | data_0046.tar |
199400 | Portabobinas Simple para Artillery Genius | <p>Por la forma distinta del montaje de la Genius a la Sidewinder. Hice este portabobinas simple a base de los existentes para los que tienen la genius como yo.</p> | [
"filamentspoolholder",
"artillerygenius"
] | 3D Printers > Other Printer Parts & Upgrades | [
"199400/images/image_1_compressed.jpg"
] | [
"199400/stls/BRAZO SENSOR FILAMENTO.stl",
"199400/stls/EJE RODADURA CARRETEL UNIVERSAL SIMPLE.stl"
] | CC0 | https://www.printables.com/model/199400 | data_0046.tar |
216834 | portafilter coffee scraper : cleaner |
<p>easily clean the coffee puck out of the portafilter without the noise of a knock-box.</p>
<p>prints flat without support and pretty fast.</p>
<p>Easy scaleable in your slicer.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Anycubic</p>
<p class="detail-setting printer"><strong>Printer: </st... | [
"thingiverse"
] | Household > Other House Equipment | [
"216834/images/image_1_compressed.jpg",
"216834/images/image_2_compressed.jpg",
"216834/images/image_3_compressed.jpg",
"216834/images/image_4_compressed.jpg",
"216834/images/image_5_compressed.jpg",
"216834/images/image_6_compressed.jpg",
"216834/images/image_7_compressed.jpg",
"216834/images/image_8... | [
"216834/stls/portafilter_scraper_single.stl",
"216834/stls/portafilter_scraper_single_magnet.stl"
] | CC-BY | https://www.printables.com/model/216834 | data_0046.tar |
249463 | Porter Cable 20V wall Charger mount/Black and Decker | <p>Nobody else was dumb enough to waste time aligning holes on the backplate of a porter cable charger, let alone waste more time running shape optimization.</p><p> </p><p>Model may also work with some black and decker chargers, as it looks like they use the same mold.</p> | [
"portercable",
"blackanddecker"
] | Hobby & Makers > Tools | [
"249463/images/image_1_compressed.jpg",
"249463/images/image_2_compressed.jpg",
"249463/images/image_3_compressed.jpg"
] | [
"249463/stls/Porter Cable_V6.stl"
] | GPL2.0 | https://www.printables.com/model/249463 | data_0046.tar |
54557 | Portioning scoop "COFFEE TIME" | <p>A Coffee powder portioning scoop in multi color.</p>
<h3>Print instructions</h3><p>With a layer height of 0.2mm, the color changes occur in layers 11 and 21.</p> | [
"kitchen",
"multicolor",
"scoop",
"coffee",
"spoon",
"coffeescoop",
"portioningscoop"
] | Household > Kitchen | [
"54557/images/image_1_compressed.jpg",
"54557/images/image_2_compressed.jpg"
] | [
"54557/stls/coffeetime.stl",
"54557/stls/coffeetime_multicolor.stl"
] | CC-BY | https://www.printables.com/model/54557 | data_0046.tar |
863350 | Posable skeleton, added v2! | <p>Posable skeleton, scale him as you want!</p><p>Update: added version 2.0</p> | [
"halloween",
"super",
"figure",
"warhammer",
"cool",
"nice",
"skeleton",
"warhammer40k",
"warhammer40000",
"good",
"posable"
] | Toys & Games > Other Toys & Games | [
"863350/images/image_1_compressed.jpg",
"863350/images/image_2_compressed.jpg"
] | [
"863350/stls/(four legs).stl",
"863350/stls/for v2.stl",
"863350/stls/legs and arms.stl",
"863350/stls/Posable skeleton.stl",
"863350/stls/skeleton chest.stl",
"863350/stls/skeleton hip.stl",
"863350/stls/skeleton thigh.stl",
"863350/stls/Skeleton V2.0.stl",
"863350/stls/skull.stl"
] | CC0 | https://www.printables.com/model/863350 | data_0046.tar |
936444 | Positron PosiXY Cube | <p>Here is a 30x30mm calibration cube designed to test a Positron v3.2 kit printer. </p><p><strong>Edit 10/30: Added a PosiXY_cube.3mf Orcaslicer project. Opening the project will load tuned baseline settings for printing on the Positron. A well tuned and correctly tensioned Positron should be able to handle doubl... | [
"calibration",
"cube",
"calibrationcube",
"calibrationtest",
"ldo",
"positron",
"ldopositron"
] | 3D Printers > Test Models | [
"936444/images/image_1_compressed.jpg",
"936444/images/image_2_compressed.jpg",
"936444/images/image_3_compressed.jpg",
"936444/images/image_4_compressed.jpg"
] | [
"936444/stls/PosiXY_cube.stl"
] | CC-BY | https://www.printables.com/model/936444 | data_0046.tar |
147649 | Post-It Note Holder with USB and Pens | <p>Post-IT note holder that also holds SD Cards and USB Drives. The back can also hold pens. Simplistic design. Included STEP file for your own remix.</p>
Category: 3D Printing | [
"usb",
"usbholder",
"postit",
"thingiverse",
"usbstickholder",
"postitnotes",
"stickynotesholder",
"stickynote",
"postitholder"
] | Household > Office | [
"147649/images/image_1_compressed.jpg",
"147649/images/image_2_compressed.jpg",
"147649/images/image_3_compressed.jpg"
] | [
"147649/stls/Postit_Note_Holder.stl"
] | CC-BY | https://www.printables.com/model/147649 | data_0046.tar |
135331 | Post-It Organizer | <p>Printed with PLA and 0.5 nozzle.</p> | [
"organizer",
"office",
"color",
"it",
"post",
"officeorganization",
"homeoffice"
] | Hobby & Makers > Organizers | [
"135331/images/image_1_compressed.jpg",
"135331/images/image_2_compressed.jpg",
"135331/images/image_3_compressed.jpg"
] | [
"135331/stls/Post-It Organizer.stl"
] | CC-BY | https://www.printables.com/model/135331 | data_0046.tar |
1045254 | Potato Spiral Slicer v2 | <p>New and improved version of this: <a href="https://www.printables.com/model/933426-potato-spiral-slicer">https://www.printables.com/model/933426-potato-spiral-slicer</a></p><p>Print in something strong like PLA+ or PETG.</p><p>Tips for use:</p><ol><li>Use baby potatoes, much softer and easier to slice.</li><li>Use a... | [
"tool",
"potato",
"potatochip"
] | Household > Kitchen | [
"1045254/images/image_1_compressed.jpg"
] | [
"1045254/stls/potato holder.stl",
"1045254/stls/spiral cutter.stl"
] | CC-BY | https://www.printables.com/model/1045254 | data_0046.tar |
257429 | Potentiometer and encoder hex wrench 10mm, 8mm | <p>The first and the last 3mm 100% infill. Or just use the .3mf file.</p> | [] | Hobby & Makers > Tools | [
"257429/images/image_1_compressed.jpg"
] | [
"257429/stls/Potentiometer and encoder hex wrench 10mm.stl",
"257429/stls/SMA 8mm.stl"
] | CC-BY | https://www.printables.com/model/257429 | data_0046.tar |
1129449 | Potentiometer Nut Tightening Tool / Wrench | <p>A wrench-like tool for tightening potentiometer nuts.</p><p>12mm diameter, 10mm from one side to the opposite</p> | [
"wrench",
"electronics",
"audio",
"synthesizer",
"synthesizers",
"synth",
"eurorack",
"poti",
"potentiometer",
"modularsynth",
"synthdiy",
"tightening",
"potentiometers"
] | Hobby & Makers > Electronics | [
"1129449/images/image_1_compressed.jpg",
"1129449/images/image_2_compressed.jpg",
"1129449/images/image_3_compressed.jpg"
] | [
"1129449/stls/pot_wrench.stl"
] | CC0 | https://www.printables.com/model/1129449 | data_0046.tar |
58627 | Potion Bottle | <p>Print this out of PLA at a nozzle temp of 210 a bed temp of 60.</p><p>P.S the dimple on the nozzle is to make pouring easier.</p> | [
"bottle",
"holder",
"fantasy",
"medieval",
"dungeonsanddragons",
"magicpotionbottle"
] | Art & Design > Other Art & Designs | [
"58627/images/image_1_compressed.jpg"
] | [
"58627/stls/octo bottle.stl",
"58627/stls/octo cap.stl"
] | CC-BY | https://www.printables.com/model/58627 | data_0046.tar |
1082115 | Pottery Rim Cone Tools | <h3><strong>Print Settings</strong></h3><p><strong>Printer:</strong></p><p>Creality S1</p><p><strong>Rafts:</strong></p><p>No</p><p><strong>Supports:</strong></p><p>No</p><p><strong>Resolution:</strong></p><p>0,20</p><p><strong>Infill:</strong></p><p>25 ~ 100</p><p><strong>Filament:</strong> </p><p>ABS, PLA or PET... | [
"cone",
"pottery",
"potterytools"
] | Hobby & Makers > Tools | [
"1082115/images/image_1_compressed.jpg"
] | [
"1082115/stls/pottery rim cone 4-6cm.stl",
"1082115/stls/pottery rim cone 5-9cm.stl",
"1082115/stls/pottery rim cone 7-12cm.stl"
] | CC0 | https://www.printables.com/model/1082115 | data_0046.tar |
93133 | POTTERY TOOL VAUGHAN'S RUBBER RIM FINISHER | <p>Design inspired from a wooden tool Vaughan Smith fashioned to smooth rims when finishing a thrown pot. You can use ¼" rubber bands that at one time came with bags of clay or you can buy them. Other option is to cut a strip of chamois leather and fashion it around the finisher. Muddy picture shows chamois cut around ... | [] | Art & Design > Other Art & Designs | [
"93133/images/image_1_compressed.jpg",
"93133/images/image_2_compressed.jpg",
"93133/images/image_3_compressed.jpg",
"93133/images/image_4_compressed.jpg",
"93133/images/image_5_compressed.jpg"
] | [
"93133/stls/4 Vs VAUGHANS RUBBER RIM FINISHER ANGLED v3.stl"
] | CC0 | https://www.printables.com/model/93133 | data_0046.tar |
1522165 | Pounce-a-pult | Spiral Cat Toy | <h3>Description</h3><p>This toy is built around a flat spiral spring that flexes and rebounds when your cat swats it, creating a bouncy, wiggly motion that’s fun to poke and hard to ignore. One good tap sends the spiral wobbling and twisting before it settles back, ready for the next round.</p><p>The spiral arm leads t... | [
"pet",
"cat",
"spiral",
"spring",
"flexible",
"interactive"
] | Household > Pets | [
"1522165/images/image_1_compressed.jpg",
"1522165/images/image_2_compressed.jpg",
"1522165/images/image_3_compressed.jpg",
"1522165/images/image_4_compressed.jpg"
] | [
"1522165/stls/Base-2.stl",
"1522165/stls/cat-toy.stl",
"1522165/stls/Mount-Left.stl",
"1522165/stls/Mount-Right.stl",
"1522165/stls/Pom-Pom-Holder.stl",
"1522165/stls/Spring-2.stl"
] | CC-BY | https://www.printables.com/model/1522165 | data_0046.tar |
154393 | Power strip Mount |
<p>Power strip mount</p>
Category: Organization
| [
"thingiverse"
] | Household > Office | [
"154393/images/image_1_compressed.jpg"
] | [
"154393/stls/power_strip_mount_v1.stl"
] | CC0 | https://www.printables.com/model/154393 | data_0046.tar |
299058 | Power supply unit screw-on bracket for Voron0.1 or Voron0.2 | <p>This is a bracket adapter for mounting a Meanwell LRS-150-24 power supply to the bottom of a Voron0.1 or Voron0.2 3d printer. It isn't that I distrust modern adhesives, I just might want to replace the power supply one day and I don't want to deal with adhesives if I ever do. I uploaded two versions with different s... | [
"psumount",
"voron",
"voron01",
"voron0",
"voron02"
] | 3D Printers > Voron Parts & Upgrades | [
"299058/images/image_1_compressed.jpg",
"299058/images/image_2_compressed.jpg",
"299058/images/image_3_compressed.jpg"
] | [
"299058/stls/PSU_bracket_Voron0.1-4.1mm_heat_set_insert.stl",
"299058/stls/PSU_bracket_Voron0.1-4.6mm_heat_set_insert.stl",
"299058/stls/PSU_bracket_Voron0.2-4.1mm_heat_set_insert.stl",
"299058/stls/PSU_bracket_Voron0.2-4.6mm_heat_set_insert.stl",
"299058/stls/PSU_bracket_Voron0_flush_4.1mm_heat_set_insert.... | CC-BY | https://www.printables.com/model/299058 | data_0046.tar |
140822 | Power switch molly guard for Fractal Define S2 |
<p>This is a <a href="https://www.techopedia.com/definition/26567/molly-guard">molly guard</a> for the power switch on the <a href="https://www.fractal-design.com/products/cases/define/define-s2-tempered-glass/blackout/">Fractal Define S2 computer case</a>.</p>
<p>This model features a print-in-place hinge as well a... | [
"switch",
"thingiverse",
"powerswitch",
"fractaldesign",
"mollyguard",
"catprotection",
"catproofing",
"defines2",
"powerbuttoncover"
] | Gadgets > Computers | [
"140822/images/image_1_compressed.jpg",
"140822/images/image_2_compressed.jpg"
] | [
"140822/stls/Molly_Guard.stl"
] | CC-BY | https://www.printables.com/model/140822 | data_0046.tar |
896839 | Powerbank 21000 mAh - 18650. Power 22,5w | <p>Powerbank 21000 mAh with 18650 Li-Ion batteries.</p><p><strong>Part list:</strong></p><ul><li>powerbank modul SW6208 (power rating of 22.5W)</li><li>6 Samsung INR18650-35E (6x3500 mAh)</li><li>2 screws M2x10 (for housing)</li><li>2 screws M2x5</li><li>silicone cable AWG18</li><li>silicone glue</li></ul><p><str... | [
"battery",
"gadget",
"18650",
"18650battery",
"powerbank",
"sw6208"
] | Gadgets > Other Gadgets | [
"896839/images/image_1_compressed.jpg",
"896839/images/image_2_compressed.jpg",
"896839/images/image_3_compressed.jpg",
"896839/images/image_4_compressed.jpg"
] | [
"896839/stls/housing-board.stl",
"896839/stls/housing-cup.stl"
] | CC-BY | https://www.printables.com/model/896839 | data_0046.tar |
424169 | Powerful Blad - stackable threaded storage container for Hama/Perler beads | <p>This model is especially for storing Hama Midi perler beads. A container fits a 1000pcs pack easily. There's a slot inside the model where you can pop a single bead so you can see the color from the outside without removing the lid. (as long as you print with transparent filament). The containers are threaded, so yo... | [
"beads",
"stackable",
"knurled",
"stackablecontainer",
"stackablebox",
"stackableboxes",
"bead",
"perler",
"stackabledrawers",
"threadedcontainer",
"hamabeads"
] | Hobby & Makers > Organizers | [
"424169/images/image_1_compressed.jpg",
"424169/images/image_2_compressed.jpg",
"424169/images/image_3_compressed.jpg",
"424169/images/image_4_compressed.jpg"
] | [
"424169/stls/Powerful_Blad-Addon-D95.stl",
"424169/stls/Powerful_Blad-Base-D95.stl",
"424169/stls/Powerful_Blad-Top-D95.stl"
] | CC-BY | https://www.printables.com/model/424169 | data_0046.tar |
595440 | PowerNozzle Gardena | Laminar flow ∅4mm cleaning nozzle for Gardena® system (don＇t expect a super clear stream) | Download free 3D printable STL models | [
"gardena",
"gardenacoupling",
"cleaning",
"openscad",
"laminar",
"laminarflow",
"scad",
"waterhose",
"cleanignozzle"
] | Household > Outdoor & Garden | [
"595440/images/image_1_compressed.jpg"
] | [
"595440/stls/23-279Schnellkupplung-Gardena-60grad.stl",
"595440/stls/23-279Schnellkupplung-Gardena.stl",
"595440/stls/23-279Schnellkupplung-GardenaN2.stl",
"595440/stls/23-279Schnellkupplung-GardenaN4.stl"
] | CC0 | https://www.printables.com/model/595440 | data_0046.tar |
215192 | PowerPole connector cable strain relief | <p>Anderson PoperPole connectors are popularly used for Amateur Radio equipment, but for small low power gear the power cables are often small diameter and need some strain relief when soldered to a PowerPole connector.</p><p>This clip supports a pair of PowerPoles in the standard configuration used in ham radio. The c... | [
"hamradio",
"amateurradio",
"powerpole",
"andersonpowerpole"
] | Hobby & Makers > Electronics | [
"215192/images/image_1_compressed.jpg",
"215192/images/image_2_compressed.jpg"
] | [
"215192/stls/power-pole-cable-clip v6.stl"
] | CC-BY | https://www.printables.com/model/215192 | data_0046.tar |
392951 | Powerstrip holder clip - Mehrfachsteckdose | <p>Simple clip-on powerstrip holder.</p><p>Fast and easy to print, use a single 3 or 4mm screw for mounting.</p><p>Fits most of the "EU Schuko Mehrfachsteckdosen", even the new design from Hornbach.</p><p>Files:</p><p>standard-Version = tight fit; powerclip_l = loose fit for bigger powerstrips</p><p>Printing:</p><p>Pri... | [
"thingiverse",
"powerstrip",
"steckdose",
"schuko",
"powerstripholder",
"hornbach",
"steckdosenleiste",
"mehrfachsteckdose",
"mehrfachstecker",
"eupowerstripmount"
] | Household > Other House Equipment | [
"392951/images/image_1_compressed.jpg",
"392951/images/image_2_compressed.jpg",
"392951/images/image_3_compressed.jpg",
"392951/images/image_4_compressed.jpg",
"392951/images/image_5_compressed.jpg"
] | [
"392951/stls/powerclip.stl",
"392951/stls/powerclip_l.stl"
] | CC-BY | https://www.printables.com/model/392951 | data_0046.tar |
1084477 | Prasátko PF 2025 | [
"pig",
"pf"
] | Art & Design > 2D Plates & Logos | [
"1084477/images/image_1_compressed.jpg"
] | [
"1084477/stls/PF_PRASE 2025 (1).stl"
] | CC0 | https://www.printables.com/model/1084477 | data_0046.tar | |
403367 | Pre-supported Blank DSA Keycaps | <blockquote><p><i><strong>Make sure to like and rate the file if you found it useful! Tips are also appreciated if you'd like to see more files from me or if you would like to request changes or updates to files!</strong></i></p></blockquote><p>(<strong>I have printed this file</strong>. Make photos coming soon when pr... | [
"keycap",
"keyboard",
"fdm",
"cherrykeycap",
"dsa",
"presupported",
"secv",
"builtin",
"vakio3d",
"presupport"
] | Gadgets > Computers | [
"403367/images/image_1_compressed.jpg",
"403367/images/image_2_compressed.jpg",
"403367/images/image_3_compressed.jpg",
"403367/images/image_4_compressed.jpg",
"403367/images/image_5_compressed.jpg",
"403367/images/image_6_compressed.jpg"
] | [
"403367/stls/100u_blankSupported.stl",
"403367/stls/125u_blankSupported.stl",
"403367/stls/150u_blankSupported.stl",
"403367/stls/200u_blankSupported.stl",
"403367/stls/225u_blankSupported.stl",
"403367/stls/275u_blankSupported.stl"
] | CC-BY | https://www.printables.com/model/403367 | data_0046.tar |
1042190 | Precision Screwdriver | <p>Precision screwdriver with magnetic bit & screw retention. Bearing-smooth twisting with knurled fine control shaft and ribbed upper shaft for more torque. Model and dimensions inspired by the LTT precision screwdriver. Compatible with standard 4mm bits.</p><h3>Printing Recommendations</h3><ul><li>Layer height: 0... | [
"precision",
"freecad",
"scredriver",
"precisionscrewdriver",
"freecadv1"
] | Hobby & Makers > Tools | [
"1042190/images/image_1_compressed.jpg",
"1042190/images/image_2_compressed.jpg",
"1042190/images/image_3_compressed.jpg",
"1042190/images/image_4_compressed.jpg",
"1042190/images/image_5_compressed.jpg",
"1042190/images/image_6_compressed.jpg"
] | [
"1042190/stls/Shaft.stl",
"1042190/stls/Top 5.2mm.stl",
"1042190/stls/Top-5.0mm.stl",
"1042190/stls/Top-5.1mm.stl"
] | CC-BY | https://www.printables.com/model/1042190 | data_0046.tar |
953282 | Predator Bust | [
"statue",
"predator",
"awesome"
] | Toys & Games > Action Figures & Statues | [
"953282/images/image_1_compressed.jpg",
"953282/images/image_2_compressed.jpg",
"953282/images/image_3_compressed.jpg",
"953282/images/image_4_compressed.jpg",
"953282/images/image_5_compressed.jpg",
"953282/images/image_6_compressed.jpg",
"953282/images/image_7_compressed.jpg"
] | [
"953282/stls/PM3D_Cube3D1_SubTool1.stl",
"953282/stls/PM3D_Cube3D1_SubTool2.stl",
"953282/stls/PM3D_Cube3D1_SubTool3.stl"
] | CC-BY | https://www.printables.com/model/953282 | data_0046.tar | |
538856 | Predator Head Trophy Wall Mount | <p>Predator Head Trophy (Wall Mount)</p><p>Just found out about the negative parts you can add in the Prusa slicer add parts gallery. </p><p>This is very useful. </p><p> </p> | [] | Art & Design > Sculptures | [
"538856/images/image_1_compressed.jpg"
] | [
"538856/stls/predwall.stl"
] | CC-BY | https://www.printables.com/model/538856 | data_0046.tar |
1462849 | Premium Case for my Educational Mechanical Models | <h3>In short</h3><p>This <strong>premium case</strong> has <strong>thicker walls</strong> and features a <strong>Higaki pattern</strong> engraved on its surface.<br>It is suitable when you want to <strong>present the models as a gift</strong>.<br>It has the <strong>same dimensions</strong> as <a href="https://www.print... | [
"case"
] | Hobby & Makers > Organizers | [
"1462849/images/image_1_compressed.jpg",
"1462849/images/image_2_compressed.jpg",
"1462849/images/image_3_compressed.jpg",
"1462849/images/image_4_compressed.jpg",
"1462849/images/image_5_compressed.jpg"
] | [
"1462849/stls/Mechanical Model Case v4-body.stl",
"1462849/stls/Mechanical Model Case v4-lid.stl"
] | CC-BY | https://www.printables.com/model/1462849 | data_0046.tar |
255040 | Press Adaptor for 3DSETS ball joints |
<p>This is an adaptor for mistertech's excellent "Fidget Spinner Press and bearing remover" thing 2275122. This part screws onto the press and has the shape of 3DSETS calibration print's ball joint pressing area.</p>
<p>By using this part one can slowly screw the top screw and press the ball joint into the arms with... | [
"thingiverse"
] | Hobby & Makers > RC & Robotics | [
"255040/images/image_1_compressed.jpg",
"255040/images/image_2_compressed.jpg",
"255040/images/image_3_compressed.jpg"
] | [
"255040/stls/CalibrationPressPart.stl"
] | CC-BY | https://www.printables.com/model/255040 | data_0046.tar |
995895 | Press-Fit rollers for Cereal box filament roller | <p>An alternate roller and axle set for the cereal box filament roller.</p><p>Tolerance between the axle and the rollers is 0.1mm for a tight press fit (aka a few tap-taps with a mallet). </p><p>Printed in PETG, 0.2mm layers. </p> | [
"cerealbox",
"filamentroller"
] | 3D Printers > Other Printer Parts & Upgrades | [
"995895/images/image_1_compressed.jpg"
] | [
"995895/stls/71mm Spool Roller.stl",
"995895/stls/8mm Axle.stl"
] | CC-BY | https://www.printables.com/model/995895 | data_0046.tar |
319798 | Presser Foot Height Compensation (Hebamme) | <p>My mother, sister, niece do sew all and much. Ma asked me a while ago if I could do something like that. I could and she was happy. I just forgot to publish this little tool. It was only 1-2 years ago ;-)</p><p>I printed this with a 0.4 mm nozzle and a 0.15 mm layer height. Hinge is printed in place.</p><p>If you're... | [
"sewing",
"sewingmachine",
"thingiverse",
"sew",
"sewingaid"
] | Hobby & Makers > Other Ideas | [
"319798/images/image_1_compressed.jpg",
"319798/images/image_10_compressed.jpg",
"319798/images/image_11_compressed.jpg",
"319798/images/image_12_compressed.jpg",
"319798/images/image_2_compressed.jpg",
"319798/images/image_3_compressed.jpg",
"319798/images/image_4_compressed.jpg",
"319798/images/imag... | [
"319798/stls/PresserFootHeightCompensation.high.stl",
"319798/stls/PresserFootHeightCompensation.low.stl",
"319798/stls/PresserFootHeightCompensation.ultra.stl"
] | CC-BY | https://www.printables.com/model/319798 | data_0046.tar |
480979 | Pressfit Bottom Bracket BB86 Bearing Remover v2 | <p>Model inspired by metal tools. I was too cheap to buy a tool that I use only once every three years. The printed plastic version is not as durable. The first version broke while pushing out the second bearing but did the job. This version is reinforced and should work better.</p><p>Print settings on a Prusa Mini usi... | [
"biketools",
"bottombrackettool"
] | Hobby & Makers > Tools | [
"480979/images/image_1_compressed.jpg"
] | [
"480979/stls/BB86_remover_v2.stl"
] | CC-BY | https://www.printables.com/model/480979 | data_0046.tar |
58190 | Presta valve rim adapter | <p>A small curved washer for use with generic "aero" rims. Helps more with tubeless systems where air leakage around the valve needs to be mitigated.</p>
<p>I modeled this off of one that came with a Diamondback Airen 1, 2018 model.</p>
<p>Printed in PETG easily at 0.05 mm layer height, no supports.</p>
Category: Rep... | [
"valve",
"adapter",
"bike",
"thingiverse",
"rim",
"washer",
"presta",
"tubeless"
] | Sports & Outdoor > Other Sports | [
"58190/images/image_1_compressed.jpg",
"58190/images/image_2_compressed.jpg",
"58190/images/image_3_compressed.jpg",
"58190/images/image_4_compressed.jpg",
"58190/images/image_5_compressed.jpg",
"58190/images/image_6_compressed.jpg",
"58190/images/image_7_compressed.jpg"
] | [
"58190/stls/RIM_ADAPTER_PRESTA_VALVE.stl"
] | CC-BY | https://www.printables.com/model/58190 | data_0046.tar |
516979 | Primer Bulb | <p>Print in TPU for gas resistance, flexibility and durability. DO NOT print in PLA, ABS, PETG, etc.</p><p>Flange diameter is about 19mm and bulb diameter is 15.7 mm at base.</p> | [] | Household > Outdoor & Garden | [
"516979/images/image_1_compressed.jpg",
"516979/images/image_2_compressed.jpg"
] | [
"516979/stls/Primer Bulb.stl"
] | CC-BY | https://www.printables.com/model/516979 | data_0046.tar |
73502 | princess peach box | <p>caja peach mario bros, forma parte de una colección sobre cajas de Mario no olvides visitar mi perfil también decir que las tapas a partir de 2mm puedes cambiar el color igual que hice yo saludos<br> </p><p><strong>CUB SOCIOS:</strong><br><a href="https://www.printables.com/@tecnoculebras#join:484">https://www.... | [
"mario",
"bros",
"supermario",
"princess",
"peach",
"mariobros",
"supermarioi"
] | Household > Home Decor | [
"73502/images/image_1_compressed.jpg",
"73502/images/image_2_compressed.jpg"
] | [
"73502/stls/Body.stl",
"73502/stls/Lid.stl"
] | CC0 | https://www.printables.com/model/73502 | data_0046.tar |
1177047 | Pringles Sprint + Alpha.05 update | <figure class="image"><img src="https://media.printables.com/media/prints/1177047/rich_content/8206ee0a-05c8-4f1d-b07e-204a62049525/image.png#%7B%22uuid%22%3A%22dc8cb86a-deec-43e5-abdf-758d5887c020%22%2C%22w%22%3A1416%2C%22h%22%3A998%7D"></figure><h3><i>Pringles SPRINT – CHECK BACK FOR UPDATES</i></h3><h3>&... | [
"can",
"power",
"pringles",
"rocketry",
"high"
] | Learning > Engineering | [
"1177047/images/image_1_compressed.jpg",
"1177047/images/image_2_compressed.jpg"
] | [
"1177047/stls/29mm Motor Retainer.stl",
"1177047/stls/6-32 Rail Button Support.stl",
"1177047/stls/BT20 to BT50 adapter Top.stl",
"1177047/stls/BT20 to BT50 adapter.stl",
"1177047/stls/Hole Template.stl",
"1177047/stls/Nose Weight Pod Cap for BT-50.stl",
"1177047/stls/Nose Weight Pod Cap.stl",
"117704... | CC-BY | https://www.printables.com/model/1177047 | data_0046.tar |
137536 | Print Baren | <p>I needed a print baren for some printing (2D) so I printed (3D) one. It can be scaled a bit if you need one slightly larger or smaller. I sanded the bottom with some high grit sandpaper to get a super smooth surface, though if your printer can print with super smooth bottoms that may not be necessary. </p> | [
"baren",
"printmaking"
] | Hobby & Makers > Tools | [
"137536/images/image_1_compressed.jpg",
"137536/images/image_2_compressed.jpg",
"137536/images/image_3_compressed.jpg"
] | [
"137536/stls/Print Baren.stl"
] | CC-BY | https://www.printables.com/model/137536 | data_0046.tar |
138696 | Print Bed Filament Dryer | <p>Simple and effective Print Bed Filament Dryer.</p><p>Can be used with 60X60 and 40X40 fans.</p><p>Uses only 35g of filament.</p><p>Better to print on ABS or PetG. Use support on Build Plate only.</p><p>Use a cardboard box the size of the Print Bed and a height of 2.5 cm / 1 in above the fan to facilitate air circula... | [
"filament",
"ender3",
"filamentdryer",
"filamentdrybox"
] | 3D Printers > Accessories | [
"138696/images/image_1_compressed.jpg",
"138696/images/image_2_compressed.jpg",
"138696/images/image_3_compressed.jpg",
"138696/images/image_4_compressed.jpg",
"138696/images/image_5_compressed.jpg",
"138696/images/image_6_compressed.jpg",
"138696/images/image_7_compressed.jpg",
"138696/images/image_8... | [
"138696/stls/Filament Dryer Fun 40X40 v2.stl",
"138696/stls/Filament Dryer Fun 60X60 v4.stl",
"138696/stls/Filament Dryer V2 v4.stl"
] | GPL3.0 | https://www.printables.com/model/138696 | data_0046.tar |
113524 | Print in Place - Click Box with Hinge & Latch |
<p>This is my print-in-place "Click Box with Hinge and Latch". After some iterations I figured out how to design a proper hinge and latch. Now this box is easy to print (no supports) and works perfect. I use it for storing small parts like tiny screws or electronics stuff. The dimensions of the box are 40x40x20mm.<b... | [
"box",
"case",
"container",
"part",
"hinge",
"printinplace",
"joint",
"click",
"latch",
"store",
"thingiverse",
"hinged",
"boxing"
] | Household > Other House Equipment | [
"113524/images/image_1_compressed.jpg",
"113524/images/image_2_compressed.jpg",
"113524/images/image_3_compressed.jpg",
"113524/images/image_4_compressed.jpg",
"113524/images/image_5_compressed.jpg",
"113524/images/image_6_compressed.jpg"
] | [
"113524/stls/click_box.stl"
] | CC-BY | https://www.printables.com/model/113524 | data_0046.tar |
158873 | Print in Place Articulated Kobra Cobra (AnyCubic) | <p>This is the file that AnyCubic provided to print for their Kobra series of printers launch in March 2022.</p><p>The STL is the original file. I also uploaded a rotated and scaled the model to fit on the Mini & MK3S+. These versions also have a custom raft under the end of the tail and head sections for stability... | [
"snake",
"articulated",
"printinplace",
"steampunk",
"cobra",
"anycubic",
"articulatedmodel",
"articulatedanimal",
"kobra",
"articulatedsnake"
] | Toys & Games > Other Toys & Games | [
"158873/images/image_1_compressed.jpg",
"158873/images/image_2_compressed.jpg",
"158873/images/image_3_compressed.jpg",
"158873/images/image_4_compressed.jpg"
] | [
"158873/stls/Anycubic articulated-cobra-MINI.stl",
"158873/stls/Anycubic articulated-cobra-MK3S.stl",
"158873/stls/Anycubic articulated-cobra.stl"
] | CC0 | https://www.printables.com/model/158873 | data_0046.tar |
232574 | Print in Place Fidget Toy | <p>Print in Place Fidget Toy.</p><p>Needs support.</p> | [] | Toys & Games > Other Toys & Games | [
"232574/images/image_1_compressed.jpg",
"232574/images/image_2_compressed.jpg"
] | [
"232574/stls/Print in Place Fidget Toy.stl"
] | CC0 | https://www.printables.com/model/232574 | data_0046.tar |
68779 | Print in place hinge | <p>This is a hinge, very much optimized for printing due to the draft angles. So the parts don't glue together and the movement is very smooth.<br>Clearance: 0,5mm</p><p>Works very fine on any machine. I use an Ender 3 and PLA or PETG.<br> </p> | [] | Household > Other House Equipment | [
"68779/images/image_1_compressed.jpg",
"68779/images/image_2_compressed.jpg"
] | [
"68779/stls/Scharnier.stl"
] | CC0 | https://www.printables.com/model/68779 | data_0046.tar |
908204 | Print in place planetary gearbox. | <p>In my experience, the tolerances worked fine when using prusaslicer. The gearbox uses double helical gears to not fall apart. You can also use this as a stress test for your printer. (thanks for 200 likes)</p> | [
"planetarygear",
"planetarygearbox"
] | Gadgets > Other Gadgets | [
"908204/images/image_1_compressed.jpg",
"908204/images/image_2_compressed.jpg"
] | [
"908204/stls/print in place gearbox.stl"
] | CC-BY | https://www.printables.com/model/908204 | data_0046.tar |
451390 | Print in Place Ragdollbot w/ Head Link | <ul><li>Updated as did not lay properly on the bed</li></ul><p> </p><p>Example printed at 150%</p><p> </p> | [
"robot",
"articulated",
"keyring",
"thingiverse"
] | Toys & Games > Action Figures & Statues | [
"451390/images/image_1_compressed.jpg",
"451390/images/image_2_compressed.jpg"
] | [
"451390/stls/Head_Link.stl"
] | CC-BY | https://www.printables.com/model/451390 | data_0046.tar |
260898 | Print In Place Usb Box | <p>Durable and simple USB device box, no need support</p><p> up to 3 small and 2 standard size usb</p> | [
"box",
"print",
"usb",
"place"
] | Gadgets > Computers | [
"260898/images/image_1_compressed.jpg",
"260898/images/image_2_compressed.jpg",
"260898/images/image_3_compressed.jpg",
"260898/images/image_4_compressed.jpg",
"260898/images/image_5_compressed.jpg"
] | [
"260898/stls/Box v11.stl"
] | CC-BY | https://www.printables.com/model/260898 | data_0046.tar |
1020261 | Print plate holder for Prusa plates | <p>Two versions one with holes, for screw head its 6mm and thread is 3mm, other has a solid top, you could glue it on maybe. Can fit 24cm long plates.</p><p>Made on MK4S using PETG.</p> | [
"holder",
"printplate"
] | 3D Printers > Accessories | [
"1020261/images/image_1_compressed.jpg",
"1020261/images/image_2_compressed.jpg",
"1020261/images/image_3_compressed.jpg",
"1020261/images/image_4_compressed.jpg"
] | [
"1020261/stls/plate holder solid.stl",
"1020261/stls/plate holder with holes.stl"
] | CC-BY | https://www.printables.com/model/1020261 | data_0046.tar |
901243 | Print-in-Place Large Simple Hinges 2"x1.6" (no supports needed) | <p>Each hinge is made up of two parts in a single STL file and will work right off the print bed. DO NOT USE SUPPORTS as they aren't needed and will likely cause the hinges to not work.</p><p>The hinges are provided with and without countersunk holes.</p><p>The dimensions of the hinges are:</p><ul><li><strong>2" ... | [
"hinge",
"printinplace",
"nosupport"
] | Hobby & Makers > Mechanical Parts | [
"901243/images/image_1_compressed.jpg",
"901243/images/image_2_compressed.jpg",
"901243/images/image_3_compressed.jpg",
"901243/images/image_4_compressed.jpg",
"901243/images/image_5_compressed.jpg"
] | [
"901243/stls/2inX1.6in-countersunk-print-in-place-hinge-plus-non-countersunk.stl",
"901243/stls/2inX1.6in-countersunk-print-in-place-hinge.stl",
"901243/stls/2inX1.6in-print-in-place-hinge.stl",
"901243/stls/2inX1.6n-print-in-place-hinge.stl",
"901243/stls/3inX1.25in-print-in-place-hinge.stl"
] | CC-BY | https://www.printables.com/model/901243 | data_0046.tar |
329782 | Print-in-Place Onewheel Toy (No text on model version) | Finger toy version of a Onewheel. Model doesn’t include text shown in photo. | Download free 3D printable STL models | [
"onewheel",
"fingerboard"
] | Toys & Games > Other Toys & Games | [
"329782/images/image_1_compressed.jpg"
] | [
"329782/stls/Onewheel Remix.stl",
"329782/stls/PiP Onewheel.stl"
] | CC0 | https://www.printables.com/model/329782 | data_0046.tar |
333306 | Printable coupler with pivoting rest for Voron 2.4r2 | <p>Don't tighten too hard or you will compress the ptfe tube.</p><p>Use a small brim on the coupler to keep it from coming loose.</p> | [
"ptfe",
"coupler",
"voron",
"pivoting"
] | 3D Printers > Voron Parts & Upgrades | [
"333306/images/image_1_compressed.jpg"
] | [
"333306/stls/coupler 4 mm.stl",
"333306/stls/Exhaust Grill pivoting.stl",
"333306/stls/ExhaustCover pivoting.stl",
"333306/stls/knurled nut.stl"
] | CC0 | https://www.printables.com/model/333306 | data_0046.tar |
163939 | Printable Hook for IKEA Skadis Headphones Rest | <p>Simple hook for IKEA Skadis Headphones Rest by steair<br><a href="https://www.printables.com/pl/prints/71522-ikea-skadis-headphones-rest">https://www.printables.com/pl/prints/71522-ikea-skadis-headphones-rest</a><br><br>Created based on IKEA SKÅDIS Hook collection by MakerSpace_Online <br><a href="https://www.t... | [] | Household > Other House Equipment | [
"163939/images/image_1_compressed.jpg",
"163939/images/image_2_compressed.jpg",
"163939/images/image_3_compressed.jpg"
] | [
"163939/stls/printable skadis hook.stl"
] | CC-BY | https://www.printables.com/model/163939 | data_0046.tar |
1238400 | Printables Fan Beads 2 Versions, Scaleable | <p>Heyhooo<br><br>Here I have two prusa/ printable fan beads for you!<br><br>I like them both but it is up to you to choose one! For the dual color version you will need a MMU or XL though :)<br><br><strong>Sizes:</strong><br><br>The Single colored version comes in 3 sizes for the rope: 3 mm, 4 mm & 5mm.</p><figure... | [
"prusa",
"multicolor",
"beads",
"fan",
"ptfe",
"tube",
"clothes",
"bead",
"accessoire",
"printables",
"mehrfarbig",
"perle",
"kleidung",
"klamotten",
"unicolor",
"einfarbig"
] | Art & Design > Other Art & Designs | [
"1238400/images/image_1_compressed.jpg",
"1238400/images/image_2_compressed.jpg",
"1238400/images/image_3_compressed.jpg",
"1238400/images/image_4_compressed.jpg",
"1238400/images/image_5_compressed.jpg",
"1238400/images/image_6_compressed.jpg"
] | [
"1238400/stls/Printables_bead_3mm.stl",
"1238400/stls/Printables_bead_4mm.stl",
"1238400/stls/Printables_bead_5mm.stl",
"1238400/stls/Printables_bead_6mm_prescaled.stl",
"1238400/stls/Printables_bead_Round_Multicolor.stl"
] | CC0 | https://www.printables.com/model/1238400 | data_0046.tar |
1583400 | Printed Heart Box with Rose – “Love You” | [
"art",
"gift",
"valentine",
"valentinesday",
"giftbox",
"valentinesdaygifts"
] | Art & Design > Other Art & Designs | [
"1583400/images/image_1_compressed.jpg"
] | [
"1583400/stls/Bottom.stl",
"1583400/stls/love box.stl",
"1583400/stls/Rose.stl",
"1583400/stls/TOP.stl"
] | CC0 | https://www.printables.com/model/1583400 | data_0046.tar | |
394228 | Printing in progress door hanger | <p>printed at .2 layer height, 15% fill.</p> | [
"printer",
"hanger",
"door",
"use",
"simple",
"beware",
"be",
"aware"
] | Hobby & Makers > Other Ideas | [
"394228/images/image_1_compressed.jpg"
] | [
"394228/stls/DoorHangerPrinting.stl"
] | CC0 | https://www.printables.com/model/394228 | data_0046.tar |
872402 | Printy Panels - Box Connectors | <p>Box connectors for all standard square <a href="https://www.printables.com/model/859807-printy-panels">Printy Panel</a> sizes (2-8 units).<br> </p><figure class="media"><oembed url="https://youtu.be/Rua7R26Sotk"></oembed></figure><p><a href="https://youtu.be/Rua7R26Sotk">https://youtu.be/Rua7R26Sotk</a> <b... | [
"display",
"useful",
"organize",
"officeorganization",
"3dprinty",
"printypanels"
] | Household > Office | [
"872402/images/image_1_compressed.jpg"
] | [
"872402/stls/2x2 All Clips Reinforced.stl",
"872402/stls/2x2 All Clips.stl",
"872402/stls/2x2 Offset Clips Reinforced.stl",
"872402/stls/2x2 Offset Clips.stl",
"872402/stls/3x3 All Clips Reinforced.stl",
"872402/stls/3x3 All Clips.stl",
"872402/stls/3x3 Offset Clips Reinforced.stl",
"872402/stls/3x3 O... | CC-BY | https://www.printables.com/model/872402 | data_0046.tar |
207403 | Privacy webcam cover | <p>Easy to install - just use 3 thin stripes of double-sided tape and that is all you need - see the pictures.</p><p> </p><p>Printed with eSun PLA+</p><p>0.2mm layers</p> | [
"cover",
"webcam",
"privacy"
] | Gadgets > Computers | [
"207403/images/image_1_compressed.jpg",
"207403/images/image_2_compressed.jpg",
"207403/images/image_3_compressed.jpg"
] | [
"207403/stls/cover1.stl",
"207403/stls/cover2.stl"
] | CC-BY | https://www.printables.com/model/207403 | data_0046.tar |
288494 | profile cover | <p>print 190 or 200 evaluate what are the best and comments or public a make!!!</p> | [
"upgrade",
"aluminiumprofile",
"profile",
"aluminumprofile",
"flsun",
"20x20profile",
"profiles",
"flsundelta",
"flsunqq",
"flsunsr",
"flsunsuperracer",
"flsunq5",
"flsunqqs",
"flsunqqspro",
"2020profile",
"flsunv400",
"alluminiumprofiles"
] | 3D Printers > Other Printer Parts & Upgrades | [
"288494/images/image_1_compressed.jpg"
] | [
"288494/stls/Cover-190mm.stl",
"288494/stls/Cover-200mm.stl"
] | CC0 | https://www.printables.com/model/288494 | data_0046.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.