model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
48794 | Prusa MMU2 selector Magnet Upgrade (R2) | <p>This is a Magnet improvement to the MMU2S (R2) Selector PINDA part.</p><p>The only modification, I made, was to place a 6x1 mm round super magnet under the steel ball and filament path.<br>This magnet will keep the steel ball down when the filament is redrawn. This will prevent false filament jam errors caused by fi... | [
"upgrade",
"prusa",
"multimaterial",
"original",
"filament",
"material",
"multi",
"magnet",
"replacement",
"mmu2s",
"mmu2",
"easy",
"pinda",
"selector",
"strong",
"better",
"r2",
"improve"
] | 3D Printers > Prusa Parts & Upgrades | [
"48794/images/image_1_compressed.jpg"
] | [
"48794/stls/mmu2-selector-finda.stl"
] | GPL3.0 | https://www.printables.com/model/48794 | data_0046.tar |
1281631 | Prusa MMU3 Core One frame holder | <p>Modified version of the original frame holder to mount a unmodified MMU3 R4 to a Prusa Core One. It can be added to the upper rear part of the housing. There are already two holes, simply use M3 screws and nuts.</p> | [
"coreone"
] | 3D Printers > Prusa Parts & Upgrades | [
"1281631/images/image_1_compressed.jpg"
] | [
"1281631/stls/mmu3-frame-holder-r4_coreone-mod.stl"
] | GPL2.0 | https://www.printables.com/model/1281631 | data_0046.tar |
1399089 | Prusa pliers holder (Gridfinity 4×2×3 stackable) | <p>Gridfinity holder for the pliers that come with Prusa printers, tested with 3 generations of pliers as they have slightly different measurements.</p><p>Size: 4x2 units</p><p>Height: 21mm / 3 units</p> | [
"pliers",
"gridfinity",
"prusapliers"
] | Hobby & Makers > Organizers | [
"1399089/images/image_1_compressed.jpg"
] | [
"1399089/stls/prusa_pliers.stl"
] | CC-BY | https://www.printables.com/model/1399089 | data_0046.tar |
130067 | Prusa print sheet holder | <p>Combined the sheetholders from iFreyz and Yoji into one and added some additional stability feet to the sides.</p><p>I've printed mine in two colors (Prusa Orange & Galaxy Black) PETG at a 0.2mm and 3 perimeters, infill 15%. To align the infill I set the angle to 35 degrees.</p> | [
"mk3",
"mini",
"sheetholder"
] | 3D Printers > Accessories | [
"130067/images/image_1_compressed.jpg"
] | [
"130067/stls/Sheet-holder.stl"
] | CC0 | https://www.printables.com/model/130067 | data_0046.tar |
64362 | Prusa printable TR8 trapeze nut | <p>This nut is suitable for i3 series printers or MMU2S. Pitch 2mm, lead 8mm<br>Nut used on Prusa MINI is a different one.<br><br><br>Tried printing it in PETG and it worked well after going back and forth with the threaded rod for a few times. Nylon seems to work better in this application. It can be printed from POM ... | [
"nut",
"pom",
"acetal",
"trapezoid",
"trapeze"
] | 3D Printers > Prusa Parts & Upgrades | [
"64362/images/image_1_compressed.jpg",
"64362/images/image_2_compressed.jpg",
"64362/images/image_3_compressed.jpg"
] | [
"64362/stls/PrusaT8nut.stl"
] | GPL3.0 | https://www.printables.com/model/64362 | data_0046.tar |
17768 | Prusa research stamp | <p>A simple stamp with logo of Prusa research.</p>
| [
"thingiverse"
] | Art & Design > 2D Plates & Logos | [
"17768/images/image_1_compressed.jpg",
"17768/images/image_2_compressed.jpg",
"17768/images/image_3_compressed.jpg",
"17768/images/image_4_compressed.jpg"
] | [
"17768/stls/logo.stl",
"17768/stls/madlo.stl",
"17768/stls/sestava1.stl"
] | CC-BY | https://www.printables.com/model/17768 | data_0046.tar |
3937 | Prusa rotary encoder knob | <p>Hello.</p>
<p>I made a remix of <a href="https://www.printables.com/model/3624-mk3s-lcd-knob">https://www.prusaprinters.org/prints/3624-mk3s-lcd-knob</a>.</p>
<p>I adjusted it to fit better and adjusted the diameter to 20mm instead of 25mm so it will not come in conflict with the X button.</p>
<h3>Print instructions... | [
"upgrade",
"prusa",
"knob",
"mk3",
"mk2",
"mk3s",
"mk2s",
"dial",
"rotary",
"encoder"
] | 3D Printers > Prusa Parts & Upgrades | [
"3937/images/image_1_compressed.jpg",
"3937/images/image_2_compressed.jpg"
] | [
"3937/stls/prusa-mk3s-rotary-encoder-knob.stl"
] | CC0 | https://www.printables.com/model/3937 | data_0046.tar |
1372 | Prusa Screen Cover | <p>If you're like me and sleep in the same room your printer is in, the bright blue screen can get quite annoying. My solution was to make a very basic cover that fits over top the screen.</p>
<p>For how simple it is I couldn't find one online so I made my own. It's pretty much just a rectangle with small handle that f... | [
"prusa",
"printer",
"cover",
"screen"
] | 3D Printers > Accessories | [
"1372/images/image_1_compressed.jpg",
"1372/images/image_2_compressed.jpg",
"1372/images/image_3_compressed.jpg"
] | [
"1372/stls/screen-cover.stl"
] | CC-BY | https://www.printables.com/model/1372 | data_0046.tar |
20246 | Prusa Screen Cover (Remix) | <p>I liked the original screen cover, but wanted it to be slightly wider so it would cover the screen better.</p>
| [
"prusa",
"printer",
"cover",
"screen"
] | 3D Printers > Accessories | [
"20246/images/image_1_compressed.jpg",
"20246/images/image_2_compressed.jpg"
] | [
"20246/stls/screen-cover-v1.stl"
] | CC-BY | https://www.printables.com/model/20246 | data_0046.tar |
435267 | Prusa SL1S Tank Drainer | <p><strong>Introduction:</strong></p><p>Draining your resin tanks after use is good practice, but we often don't do it out of inconvenience. <strong>This simple device makes it very easy, simply leave your tank and bottle on and let gravity do the rest of the work!</strong> In our experience, this system is able to cle... | [
"sl1",
"tank",
"resin",
"resinprinter",
"resintank"
] | 3D Printers > Accessories | [
"435267/images/image_1_compressed.jpg",
"435267/images/image_2_compressed.jpg",
"435267/images/image_3_compressed.jpg",
"435267/images/image_4_compressed.jpg"
] | [
"435267/stls/adjustment wheel.stl",
"435267/stls/base.stl",
"435267/stls/cradle mount.stl",
"435267/stls/tank cradle.stl"
] | CC0 | https://www.printables.com/model/435267 | data_0046.tar |
92125 | Prusa Steel Sheet Holder - wall mount | [] | 3D Printers > Accessories | [
"92125/images/image_1_compressed.jpg",
"92125/images/image_2_compressed.jpg",
"92125/images/image_3_compressed.jpg"
] | [
"92125/stls/sheet holder.stl"
] | CC0 | https://www.printables.com/model/92125 | data_0046.tar | |
119140 | Prusa Steel Sheet Lack Rack | <p>This is for storing your steel sheets (4off) in the verticle. </p><p>I did this vertically as to avoid sheets bowing when stored in the horizontal. Fitted to the under side and leg of the Lack Table. </p><p>Included left hand set of files but have not printed them.</p><p>Fitting:-</p><ol><li>Turn t... | [
"lackenclosure",
"ikealackenclosure",
"steelsheet",
"steelsheetholder"
] | 3D Printers > Accessories | [
"119140/images/image_1_compressed.jpg",
"119140/images/image_2_compressed.jpg",
"119140/images/image_3_compressed.jpg",
"119140/images/image_4_compressed.jpg",
"119140/images/image_5_compressed.jpg",
"119140/images/image_6_compressed.jpg"
] | [
"119140/stls/Sheet Lack Rack LH.stl",
"119140/stls/Sheet Lack Rack RH.stl"
] | CC-BY | https://www.printables.com/model/119140 | data_0046.tar |
945768 | Prusa Stylized Button Knob Prusament Filament Spool/Prusameter | <p>Print settings</p><p>Infill 20%</p><p>Infill pattern Cubic subdivision / Adaptive cubic</p><p>Layer height 0.2mm</p><p>Nozzle diameter 0.4mm</p><p>Prusament PLA Galaxy Black</p><p>Prusament PLA Orange</p> | [] | 3D Printers > Prusa Parts & Upgrades | [
"945768/images/image_1_compressed.jpg",
"945768/images/image_2_compressed.jpg",
"945768/images/image_3_compressed.jpg",
"945768/images/image_4_compressed.jpg",
"945768/images/image_5_compressed.jpg",
"945768/images/image_6_compressed.jpg",
"945768/images/image_7_compressed.jpg"
] | [
"945768/stls/Filament.stl",
"945768/stls/Full Spool DO NOT PRINT THIS!!!.stl",
"945768/stls/Spool Bottom.stl",
"945768/stls/Spool Top General.stl",
"945768/stls/Spool Top Prusa MK 3 & 4.stl"
] | CC-BY | https://www.printables.com/model/945768 | data_0046.tar |
1196551 | Prusa SwingArm for Creality K1/K1C (Experimental) | <p>With the Prusa CORE One they introduced a new way of guiding the cables and filament to the extruder, something they call the SwingArm.</p><p>I've remixed the design to make it compatible with the K1/K1C, when using this <a href="https://www.printables.com/model/520207-jc-creality-k1-lid-riser">Lid Riser</a>. Any ot... | [
"prusa",
"arm",
"3dprinter",
"cableguide",
"k1c",
"coreone"
] | 3D Printers > Creality Parts & Upgrades | [
"1196551/images/image_1_compressed.jpg",
"1196551/images/image_2_compressed.jpg",
"1196551/images/image_3_compressed.jpg"
] | [
"1196551/stls/Arm.stl",
"1196551/stls/Lid riser.stl",
"1196551/stls/Mount.stl"
] | LGPL | https://www.printables.com/model/1196551 | data_0046.tar |
5474 | Prusa T8 NUT replacement | <p>A replacement NUT for the T8 Nut because all available on thingiverse or so doesn't fit ...</p><h3>Print instructions</h3><p>I used normal PLA with the normal PLA settings in prusa slicer ...</p><p> </p><p>The nut has a tight fit.</p><p>It is better if you heat up a spare T8 rod on one side and then screw the n... | [] | 3D Printers > Accessories | [
"5474/images/image_1_compressed.jpg"
] | [
"5474/stls/nut_8mm4start2mm-v7.stl"
] | CC-BY | https://www.printables.com/model/5474 | data_0046.tar |
105799 | Prusa USB Clip. Which side is up? | <p>This little clip slides over the usb stick. The print file has a color change in it. Use some left over filament to print a handy top-up-indicator.</p> | [
"prusa",
"usbstick",
"readytoprint"
] | 3D Printers > Accessories | [
"105799/images/image_1_compressed.jpg",
"105799/images/image_2_compressed.jpg",
"105799/images/image_3_compressed.jpg",
"105799/images/image_4_compressed.jpg",
"105799/images/image_5_compressed.jpg",
"105799/images/image_6_compressed.jpg",
"105799/images/image_7_compressed.jpg",
"105799/images/image_8... | [
"105799/stls/USBclip_01-Body.stl"
] | CC0 | https://www.printables.com/model/105799 | data_0046.tar |
1153527 | Prusa XL - external USB power supply - PSU cover | <p>I bought the stepdown USB modul on ebay. Search for “<i>stepdown USB modul</i>” an compare the images.<br>I updated the part, the new board size is 19,2mm x 38,5mm</p><p>Need one M3x6 screw.</p><p>I mounted it on the right PSU, there is a free power port and the cable for the camera needs not to be so long. See pict... | [
"usb",
"powersupply",
"xl",
"xlupgrade",
"buddy3d",
"buddy3dcamera",
"psutpusb",
"externalusbport",
"externalusb",
"boddy3dpower",
"buddy3dusb",
"boddy3dpowersupply"
] | 3D Printers > Prusa Parts & Upgrades | [
"1153527/images/image_1_compressed.jpg",
"1153527/images/image_2_compressed.jpg",
"1153527/images/image_3_compressed.jpg",
"1153527/images/image_4_compressed.jpg",
"1153527/images/image_5_compressed.jpg",
"1153527/images/image_6_compressed.jpg",
"1153527/images/image_7_compressed.jpg",
"1153527/images... | [
"1153527/stls/PSU cover-USB-PSU for 17,1 x 34,3 board.stl",
"1153527/stls/PSU cover-USB-PSU for 19,2 x 38,5 board.stl"
] | GPL2.0 | https://www.printables.com/model/1153527 | data_0046.tar |
1059307 | Prusa XL 6mm PTFE Filament Sensor Collet Mod | <p>This mod replaces the Prusa XL side sensor with 4mm outlet collets for the original 4mm PTFE tube with 6mm collets for 6mm PTFE.</p><p>This works great with Repkords: <a href="https://www.printables.com/model/989597-6mm-ptfe-tube-mod-for-prusa-xl"><strong>6mm PTFE Tube Mod for Prusa XL</strong></a><br><i>This replac... | [
"prusa",
"mod",
"sensor",
"ptfe",
"tube",
"xl",
"6mm",
"huge",
"collet",
"larger"
] | 3D Printers > Prusa Parts & Upgrades | [
"1059307/images/image_1_compressed.jpg",
"1059307/images/image_2_compressed.jpg",
"1059307/images/image_3_compressed.jpg",
"1059307/images/image_4_compressed.jpg",
"1059307/images/image_5_compressed.jpg",
"1059307/images/image_6_compressed.jpg",
"1059307/images/image_7_compressed.jpg"
] | [
"1059307/stls/entry-fs-case with 6mm outlet.stl",
"1059307/stls/entry-fs-insert with 6mm outlet.stl"
] | GPL2.0 | https://www.printables.com/model/1059307 | data_0046.tar |
975209 | prusa xl enclosure covers back | <p>i needed to keep the warm air in but in the back of the xl enclosure are big vents…..</p><p>first i used paper and magnets for the tests but now i made these with magnet so you can remove them easy and put them back . </p><p>you need 4pieces of 8x3 magnets</p><p> </p> | [
"enclosure",
"xl",
"xlenclosure",
"xloriginalenclosure"
] | 3D Printers > Prusa Parts & Upgrades | [
"975209/images/image_1_compressed.jpg",
"975209/images/image_2_compressed.jpg",
"975209/images/image_3_compressed.jpg",
"975209/images/image_4_compressed.jpg"
] | [
"975209/stls/cover back original prusa xl enclosure.stl"
] | CC-BY | https://www.printables.com/model/975209 | data_0046.tar |
1174579 | Prusa XL Enclosure Front Conduit | <p>I added a second LED strip to the left-side of the enclosure and needed a way to power it. Easiest way was a short connector from the right-hand LED strip across to the left. I didn't really like the cable anchors and zip ties for this since it is right there when you open the door and was an eyesore. &n... | [
"enclosure",
"prusaxl",
"prusaxlenclosure"
] | 3D Printers > Prusa Parts & Upgrades | [
"1174579/images/image_1_compressed.jpg",
"1174579/images/image_2_compressed.jpg",
"1174579/images/image_3_compressed.jpg"
] | [
"1174579/stls/XLEFC.stl"
] | CC-BY | https://www.printables.com/model/1174579 | data_0046.tar |
1005935 | Prusa XL Enclosure Tool rack | [
"prusaxl"
] | 3D Printers > Prusa Parts & Upgrades | [
"1005935/images/image_1_compressed.jpg",
"1005935/images/image_2_compressed.jpg",
"1005935/images/image_3_compressed.jpg"
] | [
"1005935/stls/Enclosure_Tool_Holder.stl"
] | GPL2.0 | https://www.printables.com/model/1005935 | data_0046.tar | |
860920 | Prusa XL Magnetic Filament sensor remix for print orientation and more common fittings | [] | 3D Printers > Prusa Parts & Upgrades | [
"860920/images/image_1_compressed.jpg",
"860920/images/image_2_compressed.jpg",
"860920/images/image_3_compressed.jpg",
"860920/images/image_4_compressed.jpg",
"860920/images/image_5_compressed.jpg",
"860920/images/image_6_compressed.jpg"
] | [
"860920/stls/1 Text high res.stl",
"860920/stls/123 body high res.stl",
"860920/stls/2 Text high res.stl",
"860920/stls/3 Text high res.stl",
"860920/stls/4 text high res.stl",
"860920/stls/456 body high res.stl",
"860920/stls/5 text high res.stl",
"860920/stls/slash text high res.stl"
] | GPL2.0 | https://www.printables.com/model/860920 | data_0046.tar | |
884059 | Prusa XL Mod - Nozzle Seal Spring Blunted End | <p>Some of the Nozzle Seals on my Prusa XL had broken and i was thinking that it could be the spring steel was too sharp and was cutting the silicon seal. </p><p>This model blunts the end of the spring steel to maybe stop the silicon seals from breaking/getting cut.. </p><p>I have just installed, had t... | [
"prusa",
"mod",
"xl",
"prusaxl"
] | 3D Printers > Prusa Parts & Upgrades | [
"884059/images/image_1_compressed.jpg",
"884059/images/image_2_compressed.jpg",
"884059/images/image_3_compressed.jpg"
] | [
"884059/stls/Seal_Blunt_End.stl"
] | CC-BY | https://www.printables.com/model/884059 | data_0046.tar |
1135912 | Prusa XL modified CoreXY parts for new O-rings or Washers with LDO Idler Pulleys 10mm | <p><strong>Hello XL makers! </strong></p><p>This i a Remix of a few Remixes :D Thanks to all of them <3</p><p><a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.printables.com/@LukasKupec">Lukáš Kupec</a>, <a target="_blank" rel="noopener noreferrer nofollow" class="edit... | [
"upgrade",
"prusa",
"prusament",
"mod",
"e3d",
"belt",
"10mm",
"modified",
"parts",
"xl",
"xy",
"inserts",
"carriage",
"idler",
"m3",
"gates",
"remix",
"smooth",
"pulley",
"pulleys",
"motormount",
"heatsetinsert",
"corexy",
"back",
"stabilizer",
"nylon",
"3mm",
... | 3D Printers > Prusa Parts & Upgrades | [
"1135912/images/image_1_compressed.jpg",
"1135912/images/image_2_compressed.jpg",
"1135912/images/image_3_compressed.jpg",
"1135912/images/image_4_compressed.jpg"
] | [
"1135912/stls/corexy-back-left-mod-LDO.stl",
"1135912/stls/corexy-back-left-top-mod-LDO.stl",
"1135912/stls/corexy-back-right-mod-LDO.stl",
"1135912/stls/corexy-back-right-top-mod-LDO.stl",
"1135912/stls/corexy-front-left-hex-remix-v3 - no fase - heat insert- LDO.stl",
"1135912/stls/corexy-front-left-hex-... | GPL2.0 | https://www.printables.com/model/1135912 | data_0046.tar |
1369983 | Prusa XL Print Fan Upgrade – Using Core/MK4S Print Fan Blower | <h3>Prusa XL Print Fan Upgrade – Using Core/MK4S Print Fan Blower</h3><p>This upgrade replaces the stock print fan on the Prusa XL with the high-performance fan used on the Prusa Core/MK4S printers. You’ll need the official Prusa Print Fan Blower:<br>🔗 <a href="https://www.prusa3d.com/product/print-fan-blower/">Print ... | [
"fanduct",
"xl",
"prusaxl",
"fanupgrade",
"prusaxlupgrade"
] | 3D Printers > Prusa Parts & Upgrades | [
"1369983/images/image_1_compressed.jpg",
"1369983/images/image_2_compressed.jpg"
] | [
"1369983/stls/Prusa XL Fan Upgrade.stl"
] | CC-BY | https://www.printables.com/model/1369983 | data_0046.tar |
896615 | Prusa XL series: Linear (Pressure) Advance Calibration Pyramid | <p><strong>ERROR in V2 Code ! Sorry!</strong><br><strong>This was fixed in V3</strong><br><br>In a recent post, Prusa introduced the K Values in the G-code of the Filament Settings, and since i had trouble with Multicolored print having a nice bond between the edges of the colors, i thought it would be a good step to b... | [
"linear",
"xl",
"mk4",
"pressure",
"advance"
] | 3D Printers > Prusa Parts & Upgrades | [
"896615/images/image_1_compressed.jpg",
"896615/images/image_2_compressed.jpg",
"896615/images/image_3_compressed.jpg",
"896615/images/image_4_compressed.jpg"
] | [
"896615/stls/Surfalex Pressure Advance Pyramid V3 with FIX.stl"
] | CC-BY | https://www.printables.com/model/896615 | data_0046.tar |
564403 | Prusa XL Tool-changer Temp Tower (PETG) | <p>Uploading the .3mf to make using temp tower with multi-extruder easier.</p><p>Simply load the file in prusa slicer and look on the middle right side pane that lists all the model names etc. You can also change the material from PETG to PLA etc prior to slicing (just remember to turn off ooze prevention for the purpo... | [
"toolchanger",
"multiextruder",
"prusaxl",
"temptower"
] | 3D Printers > Test Models | [
"564403/images/image_1_compressed.jpg"
] | [
"564403/stls/XLTempTower-Single-T2-PETG.stl"
] | CC0 | https://www.printables.com/model/564403 | data_0046.tar |
614078 | PRUSABOX NEW COVER FOR MMU3 CONTROL BOARD COMPATIBLE WITH MMU2 FOR | NEW COVER FOR MMU3 CONTROL BOARD COMPATIBLE WITH MMU2 FOR PRUSABOX | [] | 3D Printers > Prusa Parts & Upgrades | [
"614078/images/image_1_compressed.jpg"
] | [
"614078/stls/mmu3_cover_for_control_board_box_PRUSABOX.stl"
] | GPL2.0 | https://www.printables.com/model/614078 | data_0046.tar |
442921 | Prusacaster Middle Amazon Leo Jaymz Tele Bridge 4 hole | <p>Bridge holes and neck holes had to be moved for Leo Jaymz kit from Amazon. This is still a work in progress.</p><p>4-8-2023. The middle section is finished and printed. The bridge fits as does the neck.</p><p>I need to move holes in the Control piece and output Jack to fit the screw holes from the Amazon kit.</p><p>... | [
"prusacaster"
] | Hobby & Makers > Music | [
"442921/images/image_1_compressed.jpg",
"442921/images/image_2_compressed.jpg",
"442921/images/image_3_compressed.jpg"
] | [
"442921/stls/Amazon Knob Holder Rods.stl",
"442921/stls/AmazonCaster Middle No Rods.stl",
"442921/stls/AmazonCaster Pickguard.stl",
"442921/stls/middle Amazon 8.3 rods.stl"
] | CC0 | https://www.printables.com/model/442921 | data_0046.tar |
451861 | Prusacaster TPU forearm rest. | <p>Print this upside down. I used ninja flex for this with Prusa slicer default settings. It just presses into the main body, it pretty tight, no need for glue.</p> | [
"prusa",
"tpu",
"caster",
"rest",
"forearm",
"prusacaster"
] | Hobby & Makers > Music | [
"451861/images/image_1_compressed.jpg"
] | [
"451861/stls/Prusa_caster_rest.stl"
] | CC0 | https://www.printables.com/model/451861 | data_0046.tar |
337003 | Prusament Cookie Cutter | <p>What I like about the cookies made by this cutter is the universal design - any 3D printing fan will recognize them easily and the rest of the family will see a nice cookie with snowflake-ish pattern. </p><p>But wait, there is moore! Who said you can't use a spool cookie cutters as an actual spool? Print <i>Spo... | [
"spool",
"prusament",
"cookiecutter"
] | Household > Kitchen | [
"337003/images/image_1_compressed.jpg",
"337003/images/image_2_compressed.jpg",
"337003/images/image_3_compressed.jpg",
"337003/images/image_4_compressed.jpg",
"337003/images/image_5_compressed.jpg",
"337003/images/image_6_compressed.jpg"
] | [
"337003/stls/Prusament Cookie Cutter_3mm.stl",
"337003/stls/Prusament Cookie Cutter_5mm.stl",
"337003/stls/Prusament Cookie Cutter_7mm.stl",
"337003/stls/Prusament Cookie Cutter_9mm.stl",
"337003/stls/Spool Hub_3mm.stl",
"337003/stls/Spool Hub_5mm.stl",
"337003/stls/Spool Hub_7mm.stl",
"337003/stls/Sp... | CC-BY | https://www.printables.com/model/337003 | data_0046.tar |
35985 | Prusament Fruit bowl | <p>You can use your empty prusament spool as a Fruit Bowl base, just print 8 parts and use zip ties to fix the parts in place.</p>
<p>I recommend using a 0.6 nozzle and 0.4mm layer height to reduce the printing time.</p>
<h3>Print instructions</h3><p>I recommend using a 0.6 nozzle and 0.4mm layer height to reduce the p... | [
"upcycling",
"bowl",
"fruit"
] | Household > Kitchen | [
"35985/images/image_1_compressed.jpg",
"35985/images/image_2_compressed.jpg",
"35985/images/image_3_compressed.jpg"
] | [
"35985/stls/bowl.stl",
"35985/stls/solid.stl"
] | CC0 | https://www.printables.com/model/35985 | data_0046.tar |
46222 | Prusament Spool Bird Feeder | <p>This is a funny looking bird feeder, using two sides of the prusament spool for a waiting are for the birds on top and a feeding area at the bottom.</p>
<p>The construction is very simple, the top spool has a loser fit into the main center piece so it can be easily removed for refiling. Other than that everything ju... | [
"bird",
"birdhouse",
"feeder",
"garden",
"winter",
"house",
"birdfeeder",
"feed"
] | Household > Outdoor & Garden | [
"46222/images/image_1_compressed.jpg",
"46222/images/image_2_compressed.jpg",
"46222/images/image_3_compressed.jpg",
"46222/images/image_4_compressed.jpg",
"46222/images/image_5_compressed.jpg",
"46222/images/image_6_compressed.jpg",
"46222/images/image_7_compressed.jpg",
"46222/images/image_8_compres... | [
"46222/stls/bird-feeder-dome.stl",
"46222/stls/bird-feeder-plug.stl",
"46222/stls/bird-feeder.stl"
] | CC-BY | https://www.printables.com/model/46222 | data_0046.tar |
434538 | Prusament YoYo | <p>Made with 3D printed marketing gadgets in mind. </p><p>Preferred thread length is something around 120cm (before assembly)</p><p>Assembling this is rather simple - just put end of the thread of your choosing into the mounting thread and then firmly thread parts into each other, using integrated clockwise thread... | [
"hexagon",
"spool",
"prusament",
"functional",
"filament",
"thread",
"yoyo"
] | Toys & Games > Outdoor Toys | [
"434538/images/image_1_compressed.jpg"
] | [
"434538/stls/YoYo.stl"
] | CC0 | https://www.printables.com/model/434538 | data_0046.tar |
1400 | Prusarduino Nano - Fire Safety System for 3D Printers (evolved) | <p>Hello friends!</p>
<hr/>
<p>My overall philosophy here was to create a fire safety system that could be set up easily by anybody, with no programing, arduino, or soldering skills required. Everything is plug & play here. You just have to print the parts, download the code, load it on the arduino board, plug the ... | [
"ikea",
"smoke",
"fire",
"ikeaenclosure",
"ikealack",
"detector",
"arduino",
"protector",
"arduinonano",
"protection",
"smokedetector",
"safety"
] | 3D Printers > Prusa Parts & Upgrades | [
"1400/images/image_1_compressed.jpg",
"1400/images/image_10_compressed.jpg",
"1400/images/image_11_compressed.jpg",
"1400/images/image_12_compressed.jpg",
"1400/images/image_13_compressed.jpg",
"1400/images/image_14_compressed.jpg",
"1400/images/image_15_compressed.jpg",
"1400/images/image_16_compress... | [
"1400/stls/dht22_case_-_dht22_case_bot.stl",
"1400/stls/dht22_case_-_dht22_case_top.stl",
"1400/stls/mq2_case_-_mq2_case_bot.stl",
"1400/stls/mq2_case_-_mq2_case_top.stl",
"1400/stls/nano_case_-_nano_case_bot.stl",
"1400/stls/nano_case_-_nano_case_resetbutton.stl",
"1400/stls/nano_case_-_nano_case_top.s... | CC0 | https://www.printables.com/model/1400 | data_0046.tar |
221206 | Prusaslicer infill sample | <p>This model shows off 12 types of infill available in PrusaSlicer</p><p>The .3mf has the premade modifier meshes included, the .stl is jsut the basic model.</p> | [
"sample",
"showcase",
"infill",
"infillsample"
] | 3D Printers > Test Models | [
"221206/images/image_1_compressed.jpg"
] | [
"221206/stls/Infill Sample.stl",
"221206/stls/Infill Samples.stl"
] | CC-BY | https://www.printables.com/model/221206 | data_0046.tar |
1183872 | Prusu Mini+ PTFE tube cutter (with chamfer) | <figure class="image image_resized" style="width:50.01%;"><img src="https://media.printables.com/media/prints/1183872/rich_content/5738d4b1-e63f-4f8a-890f-14a1ff8827e0/image.png#%7B%22uuid%22%3A%222300fd9f-7a91-4076-8167-2960fa312e82%22%2C%22w%22%3A1405%2C%22h%22%3A660%7D"></figure><h3><strong>PRUSA MINI+ PTFE TUBE CUT... | [
"prusa",
"mini",
"hotend",
"ptfetube",
"maintenance",
"repair",
"ptfe",
"prusamini",
"heatbreak",
"ptfetubecutter",
"miniplus",
"tubecutter"
] | 3D Printers > Prusa Parts & Upgrades | [
"1183872/images/image_1_compressed.jpg",
"1183872/images/image_2_compressed.jpg",
"1183872/images/image_3_compressed.jpg",
"1183872/images/image_4_compressed.jpg",
"1183872/images/image_5_compressed.jpg",
"1183872/images/image_6_compressed.jpg",
"1183872/images/image_7_compressed.jpg",
"1183872/images... | [] | CC-BY | https://www.printables.com/model/1183872 | data_0046.tar |
152524 | PS2 Slim 1 Vertical Stand |
<p>Created a while ago. Vertical stand for SCPH-7XK</p>
<p>Attaches to PS2 Slim with one M3x12mm screw.</p>
<p>Nothing complicated.</p>
<p>Version for SCPH-90K model <a href="https://www.thingiverse.com/thing:5164643">here</a></p>
<p>Screws I usually use:</p>
<ul>
<li>https://www.amazon.com/gp/product/B014OO5KQG</li... | [
"stand",
"playstation",
"vertical",
"verticalstand",
"thingiverse",
"ps2",
"playstation2",
"slimline",
"ps2slim"
] | Gadgets > Other Gadgets | [
"152524/images/image_1_compressed.jpg",
"152524/images/image_2_compressed.jpg",
"152524/images/image_3_compressed.jpg",
"152524/images/image_4_compressed.jpg"
] | [
"152524/stls/PS2_Slim_Vertical_Stand.stl"
] | CC-BY | https://www.printables.com/model/152524 | data_0046.tar |
267009 | PS2HDMI Stand | <p>I made this stand for the PS2HDMI adapter so it doesn't hang and put stress on the AV port of the PS2. This stand should work on both the Slim and Fat models.</p><p>This has a really tight fit, but after putting it and taking it off one time, it fits well and can be removed with ease.</p><h3>Print Settings</h3><p><s... | [
"thingiverse",
"ps2",
"playstation2",
"ps2slim",
"ps2fat"
] | Toys & Games > Outdoor Toys | [
"267009/images/image_1_compressed.jpg",
"267009/images/image_2_compressed.jpg",
"267009/images/image_3_compressed.jpg",
"267009/images/image_4_compressed.jpg"
] | [
"267009/stls/PS2HDMI_Stand.stl"
] | GPL2.0 | https://www.printables.com/model/267009 | data_0046.tar |
896939 | PS3 Controller Under Desk Holder | [
"controllermount",
"ps3",
"underdesk"
] | Hobby & Makers > Organizers | [
"896939/images/image_1_compressed.jpg",
"896939/images/image_2_compressed.jpg",
"896939/images/image_3_compressed.jpg"
] | [
"896939/stls/PS3 Holder-Holes.stl"
] | GPL3.0 | https://www.printables.com/model/896939 | data_0046.tar | |
334507 | PS4 joystick cookie cutter | <p>Nozzle: 0,4</p><p>Supports: NO</p><p>PLA, PETG <br> </p><p>My favorite model :)</p> | [
"game",
"cookie",
"fun",
"joystick",
"controller",
"ps4",
"cookiecutter",
"ps4controller",
"loveit"
] | Household > Kitchen | [
"334507/images/image_1_compressed.jpg"
] | [
"334507/stls/PS4 joystick.stl"
] | CC0 | https://www.printables.com/model/334507 | data_0046.tar |
304760 | PS5 Controller (Dualsense) Wall Hanger Low profile - fixed base | <p>Fixed the height of the original. The part which is mounted to the wall (with double sided tape) was slightly shorter than the part that holds the controller making it harder to print.</p><p> </p><p>Original by <a href="https://www.printables.com/social/321065-beebles">Beebles</a></p><p>(<a href="https://www.pr... | [
"wall",
"wallmount",
"ps5",
"dualsense"
] | Gadgets > Computers | [
"304760/images/image_1_compressed.jpg",
"304760/images/image_2_compressed.jpg",
"304760/images/image_3_compressed.jpg",
"304760/images/image_4_compressed.jpg",
"304760/images/image_5_compressed.jpg"
] | [
"304760/stls/Dualsense Wall Hanger - low profile.stl"
] | CC-BY | https://www.printables.com/model/304760 | data_0046.tar |
492665 | PS5 Kopfhörerständer | <figure class="media"><oembed url="https://youtu.be/bHAwM76lb20"></oembed></figure><p>Ein PlayStation 5 Kopfhörerständer, der mit organischen stützen gedruckt werden muss.</p><p>Ich habe das ganze mit PETG gedruckt, einer 0,4mm Düse und 0,2mm layer Höhe </p> | [
"playstation",
"organic",
"playstation5",
"kopfhoererhalter",
"heatset"
] | Gadgets > Video Games | [
"492665/images/image_1_compressed.jpg"
] | [
"492665/stls/PS 5 Buchstaben zum selber anpassen.stl",
"492665/stls/PS 5 kopfhörer halter v4.stl",
"492665/stls/PS 5 LOGO.stl"
] | CC-BY | https://www.printables.com/model/492665 | data_0046.tar |
246997 | PSP 1000 Stand with Logo | [
"playstation"
] | Gadgets > Video Games | [
"246997/images/image_1_compressed.jpg"
] | [
"246997/stls/Sony_PSP_display_stand_Logo.stl"
] | CC0 | https://www.printables.com/model/246997 | data_0046.tar | |
201120 | PSVR Spectacle Shield - Remix |
<p>This is a small piece to print (twice) for affixing to your PSVR for people who wear glasses. This is thought to help reduce scratches on the PSVR lenses (and your glasses?).</p>
<p>Why the remix? I wanted smoother lines, different fillets, and to be able to potentially adjust the dimensions. The fastest way for ... | [
"psvr",
"glasses",
"thingiverse"
] | Gadgets > Other Gadgets | [
"201120/images/image_1_compressed.jpg",
"201120/images/image_2_compressed.jpg"
] | [
"201120/stls/small_surround_remix_v11.stl"
] | CC-BY | https://www.printables.com/model/201120 | data_0046.tar |
428076 | PTFE Coupler Joiner PC4 M10 | <p>Needed to join two PTFE tubes togethor using M10 Couplers<br>Modelled M10 threads</p><p>print with low layer height 0.1mm to keep threads</p> | [
"knob",
"ptfe",
"pc4m10",
"joiner"
] | 3D Printers > Other Printer Parts & Upgrades | [
"428076/images/image_1_compressed.jpg",
"428076/images/image_2_compressed.jpg"
] | [
"428076/stls/coupler.stl"
] | CC-BY | https://www.printables.com/model/428076 | data_0046.tar |
210549 | PTFE cutter (MK3S+ remix) with wider cutting slot | <p>I needed to remix the model remixed by <a href="/social/1179-aaron-d"><strong>Aaron D</strong></a><strong> </strong>to fit the Trapezoidal blades I used the f3d file provided by him to increase the slot with to .8mm allowing the use of these thicker blades.</p><p>In the photos is the original with a Revo I will be u... | [] | 3D Printers > Prusa Parts & Upgrades | [
"210549/images/image_1_compressed.jpg",
"210549/images/image_2_compressed.jpg"
] | [
"210549/stls/ptfe_cutter8mm cutter.stl"
] | GPL2.0 | https://www.printables.com/model/210549 | data_0046.tar |
921197 | PTFE holder | <p>i desing this part that i can screw two PTFE tubes at the wall in my printerbox.</p><p>i use an 4mm Screw for this</p> | [
"mount",
"wallmount",
"ptfe",
"ptfetubemount"
] | 3D Printers > Accessories | [
"921197/images/image_1_compressed.jpg"
] | [
"921197/stls/PTFE_Tube_Holder.stl"
] | CC-BY | https://www.printables.com/model/921197 | data_0046.tar |
1145583 | PTFE Passthrough for Original Prusa Enclosure MMU bigger holes | <p>I also created a version if you have a hinged lid on your enclosure. You will need a M3x8 mm screw and nut. Installation is a bit tricky, you must insert the. part from. the top of the lid though the hole and slide it in.</p> | [
"lid",
"filament",
"guide",
"ptfe",
"hinged",
"encloseure"
] | 3D Printers > Prusa Parts & Upgrades | [
"1145583/images/image_1_compressed.jpg",
"1145583/images/image_2_compressed.jpg"
] | [
"1145583/stls/Enclosure passthrough MMU hinged lid.stl",
"1145583/stls/Enclosure passthrough MMU.stl"
] | CC-BY | https://www.printables.com/model/1145583 | data_0046.tar |
1403542 | PTFE Tube Cap with Retainer (TPU) | <p>Cap for sealing 4mm PTFE bowden tubes (for 1.75mm filament), with a tether / retainer to prevent misplacing. It aims to block moisture from getting into a dry box or AMS, or dust from getting into the tube.</p><p>The standard design is optimized to be sleek and unobtrusive, while still comfortable to use.</p><p>The ... | [
"drybox",
"cap",
"plug",
"tpu",
"ptfetube",
"seal",
"ptfe",
"bowden",
"moisture"
] | 3D Printers > Accessories | [
"1403542/images/image_1_compressed.jpg",
"1403542/images/image_2_compressed.jpg",
"1403542/images/image_3_compressed.jpg",
"1403542/images/image_4_compressed.jpg"
] | [
"1403542/stls/TetheredPTFECap.stl",
"1403542/stls/TetheredPTFECap_DeepCap.stl",
"1403542/stls/TetheredPTFECap_ExtraDeepCap.stl",
"1403542/stls/TetheredPTFECap_LongTether.stl",
"1403542/stls/TetheredPTFECap_LongTether_DeepCap.stl",
"1403542/stls/TetheredPTFECap_LongTether_ExtraDeepCap.stl"
] | CC-BY | https://www.printables.com/model/1403542 | data_0046.tar |
253748 | PTFE tube cutter 60 degrees | <p>This jig is for chamfering PTFE tubes at 60 degrees. The chamfers are needed for preparing PTFE tubes for use in 3d printer tool heads. All the components are easy to print without supports.</p><p>Use a scraper or other sharp blade to cut the tube by inserting the blade in the printed slot. The result is a clean 60-... | [
"cutter",
"ptfetube",
"ptfe",
"chamfer",
"ptfeguide",
"ptfetubecutter",
"chamfertool",
"ptfechamfercutter"
] | Hobby & Makers > Tools | [
"253748/images/image_1_compressed.jpg",
"253748/images/image_2_compressed.jpg",
"253748/images/image_3_compressed.jpg"
] | [
"253748/stls/PTFE tube cutter 60.stl"
] | CC-BY | https://www.printables.com/model/253748 | data_0046.tar |
537242 | PTFE tube hole sealing | <p>Turn part 180 degrees with bigger cirkel down like on picture.</p><p>Cooling and slow speed for good result.</p> | [
"plug",
"ptfetube",
"seal",
"dryer"
] | 3D Printers > Accessories | [
"537242/images/image_1_compressed.jpg",
"537242/images/image_2_compressed.jpg",
"537242/images/image_3_compressed.jpg"
] | [
"537242/stls/PTFE_Tube_hole_plug.stl"
] | CC0 | https://www.printables.com/model/537242 | data_0046.tar |
6357 | PTFE Tube Termination Mounts PC4-M6 | <p>This is a Series of PTFE tube holders with PC4-M6 Threads to terminate Filament runs.<br/>
There is a chamfer on each rendition.<br/>
Very useful for MMU2 PTFE tubes.</p>
<h3>Print instructions</h3><p><strong>Infill:</strong>10% - 25%</p>
<p><strong>Filament</strong>: PLA/PTFE/ASA/ABS</p>
<p>I used 2 Drywall screws ... | [
"filament",
"mount",
"ptfe",
"tube",
"m6",
"pc4",
"termination"
] | Hobby & Makers > Organizers | [
"6357/images/image_1_compressed.jpg",
"6357/images/image_2_compressed.jpg"
] | [
"6357/stls/1_a_1x_mmu2filamenttubeholder_tiny.stl",
"6357/stls/1_b_1x_mmu2filamenttubeholder_small.stl",
"6357/stls/1_c_1x_mmu2filamenttubeholder_normal.stl",
"6357/stls/1_d_1x_mmu2filamenttubeholder_huge.stl"
] | CC-BY | https://www.printables.com/model/6357 | data_0046.tar |
178711 | Ptit Dragon |
<p>Petit Dragon tout mignon ! A imprimer sans supports :)</p>
<p>N'hésitez pas à me taguer sur ls réseaux sociaux si vous l'imprimez ! :)</p>
<p><a href="https://www.tiktok.com/@body_3d/video/6981047612350729477">https://www.tiktok.com/@body_3d/video/6981047612350729477</a></p>
<p>Retrouve tout ce que je fais ici : ... | [
"dragon",
"mini",
"cute",
"fantasy",
"miniature",
"baby",
"pop",
"drake",
"thingiverse",
"dungeon",
"fantastic"
] | Hobby & Makers > Other Ideas | [
"178711/images/image_1_compressed.jpg",
"178711/images/image_2_compressed.jpg"
] | [
"178711/stls/Ptit_Dragon.stl"
] | CC-BY | https://www.printables.com/model/178711 | data_0046.tar |
853504 | Puck- Screen- Remover V2 Improved | [
"espresso",
"puckscreen"
] | Household > Kitchen | [
"853504/images/image_1_compressed.jpg",
"853504/images/image_2_compressed.jpg",
"853504/images/image_3_compressed.jpg",
"853504/images/image_4_compressed.jpg"
] | [
"853504/stls/Puck- Screen- Remover.stl",
"853504/stls/ScreenRemover_NoLogo.stl"
] | CC0 | https://www.printables.com/model/853504 | data_0046.tar | |
392686 | Pug in Armor | <p>Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a href="https://www.patreon.com/mz4250">https://www.patreon.com/mz4250</a></p><p>Patrons have access to all my files in one place, a request board, as well ... | [] | Tabletop Miniatures > Characters & Monsters | [
"392686/images/image_1_compressed.jpg",
"392686/images/image_2_compressed.jpg"
] | [
"392686/stls/Pug in Armor presupported.stl",
"392686/stls/Pug in Armor.stl",
"392686/stls/Pug presupported.stl",
"392686/stls/Pug.stl"
] | CC-BY | https://www.printables.com/model/392686 | data_0046.tar |
272897 | PUG PUPPY VALVE STEM CAP | <p>PUG PUPPY VALVE STEM CAP</p><p>FITS AUTO AND BIKE SCHRADER VALVE THREAD</p><p>PERFECT FIT</p><p>NO SUPPORTS</p><p>PRINTED WIH REVO 6 </p><p>.15 WITH 15%INFIL</p><p>STANDARD SETTINGS</p> | [
"valve"
] | Hobby & Makers > Automotive | [
"272897/images/image_1_compressed.jpg"
] | [
"272897/stls/PUG VALVE CAP.stl"
] | CC0 | https://www.printables.com/model/272897 | data_0046.tar |
17548 | Pug skull | <p>This is an approximate model of a pug dog skull, sculpted using photos as reference. It is not entirely anatomically correct.</p>
<p>The hollow version of the cranium is split into two parts, "top back" and "top front". There is a solid version of the cranium for those wishing to skip assembly.</p>
<p>This print req... | [
"dog",
"pug",
"skull",
"thingiverse"
] | World & Scans > Animals | [
"17548/images/image_1_compressed.jpg",
"17548/images/image_10_compressed.jpg",
"17548/images/image_2_compressed.jpg",
"17548/images/image_3_compressed.jpg",
"17548/images/image_4_compressed.jpg",
"17548/images/image_5_compressed.jpg",
"17548/images/image_6_compressed.jpg",
"17548/images/image_7_compre... | [
"17548/stls/pug_jaw.stl",
"17548/stls/pug_skull_solid.stl",
"17548/stls/pug_skull_top_back.stl",
"17548/stls/pug_skull_top_front.stl"
] | CC0 | https://www.printables.com/model/17548 | data_0046.tar |
404256 | Pull Copter 200mm Thick Handle Pulling Rod | <p>A 200mm Pulling Rod for the Pull Copter toy by Meister Edel with a thicker handle (4mm). </p><p>3 variations:</p><p>5.5mm thickness for looser fit</p><p>5.8mm thickness for easier insert</p><p>6mm thickness for the original size</p><p> </p> | [
"toy",
"toys",
"kidstoys"
] | Toys & Games > Outdoor Toys | [
"404256/images/image_1_compressed.jpg"
] | [
"404256/stls/200mm Rod Handle 4mm Grip 5.5mm.stl",
"404256/stls/200mm Rod Handle 4mm Grip 5.8mm.stl",
"404256/stls/200mm Rod Handle 4mm Grip 6mm.stl"
] | GPL2.0 | https://www.printables.com/model/404256 | data_0046.tar |
99820 | pull-copter-finger-ring | <p>Tirez sur l'anneau et faites rêver les enfants</p><p>Modèle de Agepbiz modifié :</p><ul><li>clé plus grande ==> 130mm</li><li>x3 vis CHC M3x8, cela fonctionne également avec de la glue</li><li>l'anneau devient une poignée</li></ul><p>Pull the ring and make the children dream</p><p>Modified Agepbiz model:</p><ul><... | [
"copter",
"finger",
"tirette"
] | Gadgets > Other Gadgets | [
"99820/images/image_1_compressed.jpg",
"99820/images/image_2_compressed.jpg",
"99820/images/image_3_compressed.jpg",
"99820/images/image_4_compressed.jpg",
"99820/images/image_5_compressed.jpg"
] | [
"99820/stls/clé.stl",
"99820/stls/corps.stl",
"99820/stls/engrenage.stl",
"99820/stls/hélice.stl",
"99820/stls/poignée.stl"
] | CC0 | https://www.printables.com/model/99820 | data_0046.tar |
515805 | Pulley | <p>Recommeded to print sideways so layer lines are long and strong way that supports are not needed.</p><p>Print with PETG or other stronger tecnical material.</p><p>One M5 bolt and nut needed for assembly.</p> | [
"pulley"
] | Hobby & Makers > Mechanical Parts | [
"515805/images/image_1_compressed.jpg",
"515805/images/image_2_compressed.jpg"
] | [
"515805/stls/Pulley Case.stl",
"515805/stls/Pulley Wheel.stl",
"515805/stls/Pulley.stl"
] | CC0 | https://www.printables.com/model/515805 | data_0046.tar |
107778 | Pulley filament wheel | <p>You may also liked some of these projects:<br><a href="https://wivry.gumroad.com">https://wivry.gumroad.com</a></p><p>-------------------------------------------------------------------------------------------------------------</p><p>If you like this model please hit the LIKE button. It helps me collect the prusamet... | [
"prusa",
"filament",
"wheel",
"guide",
"filamentguide",
"pulley"
] | 3D Printers > Other Printer Parts & Upgrades | [
"107778/images/image_1_compressed.jpg"
] | [
"107778/stls/01 - pulley_fillament - wheel.stl",
"107778/stls/02 - pulley_fillament.stl",
"107778/stls/03 - pulley fillament - body.stl"
] | CC0 | https://www.printables.com/model/107778 | data_0046.tar |
283735 | pulley system (block and tackle) with gear bearing pulleys | <p>For my <a href="https://www.printables.com/model/278236">previous design</a> I added some rims to <a href="https://www.thingiverse.com/thing:53451">emmett's gear bearings</a>, and I thought that this called for using it as a pulley - so for the mechanical marvels competition I made a pulley system (block and tackle)... | [
"pulleys",
"blockandtackle"
] | Learning > Engineering | [
"283735/images/image_1_compressed.jpg",
"283735/images/image_2_compressed.jpg",
"283735/images/image_3_compressed.jpg",
"283735/images/image_4_compressed.jpg"
] | [
"283735/stls/block-prusa.stl",
"283735/stls/pulleys_prusa.stl"
] | CC-BY | https://www.printables.com/model/283735 | data_0046.tar |
1062229 | Pulsera y Tobillera DANA Valencia | <p><strong>Modelo 3D de muñequeras y tobilleras para voluntarios de la DANA en Valencia</strong></p><p>Diseñadas para <strong>evitar que el lodo entre en el cuerpo de los voluntarios</strong>, estas muñequeras y tobilleras se imprimen en <strong>PLA con 3 perímetros</strong> para ofrecer durabilidad. La <strong>sujeció... | [
"covid",
"valencia",
"dana",
"munequeras",
"tobilleras"
] | Gadgets > Other Gadgets | [
"1062229/images/image_1_compressed.jpg",
"1062229/images/image_2_compressed.jpg",
"1062229/images/image_3_compressed.jpg",
"1062229/images/image_4_compressed.jpg",
"1062229/images/image_5_compressed.jpg",
"1062229/images/image_6_compressed.jpg",
"1062229/images/image_7_compressed.jpg"
] | [
"1062229/stls/EPI Valencia Tobillo_Muñeca.stl"
] | CC-BY | https://www.printables.com/model/1062229 | data_0046.tar |
299604 | Pumpkin bowl vase mode | <p>Candy bowl with funny "cellulite" surface, to be printed in a vase mode.<br>Make sure to turn the vase mode on!<br>I printed it in PLA with 0.4mm nozzle:</p><ul><li>0.3mm layer height</li><li>0.6mm layer width</li></ul><p> </p> | [
"halloween",
"pumpkin",
"bowl",
"candybowl"
] | Seasonal designs > Autumn & Halloween | [
"299604/images/image_1_compressed.jpg"
] | [
"299604/stls/Pumpkin Vase.stl"
] | CC-BY | https://www.printables.com/model/299604 | data_0046.tar |
256313 | Pumpkin Togepi | <p>this is a model i created in zbrush core and windows 3d builder i released last year but wanted to release it back on here </p><p> </p><p> </p> | [
"halloween",
"pumpkin",
"pokemon",
"spooky",
"jackolantern"
] | Gadgets > Video Games | [
"256313/images/image_1_compressed.jpg"
] | [
"256313/stls/pumpkintogepiFlat Bottom.stl"
] | GPL2.0 | https://www.printables.com/model/256313 | data_0046.tar |
301572 | Pumpkin/Jack-O-Lantern Cookie Cutters | <p>These spooky cookie cutters are a great for making Halloween-themed treats!</p><p>Each one takes about 100 minutes to print with standard settings on a Prusa Mini+.</p><p>Prints well with PLA at 0.2 mm layer height and 15% infill.</p> | [
"halloween",
"pumpkin",
"cookiecutter",
"jackolantern",
"halloweenpumpkin"
] | Household > Kitchen | [
"301572/images/image_1_compressed.jpg",
"301572/images/image_2_compressed.jpg",
"301572/images/image_3_compressed.jpg",
"301572/images/image_4_compressed.jpg",
"301572/images/image_5_compressed.jpg"
] | [
"301572/stls/Jack-O-LanternCookieCutter.stl",
"301572/stls/PumpkinCookieCutter_Reinforced.stl"
] | CC0 | https://www.printables.com/model/301572 | data_0046.tar |
1485918 | Punctuation Benchy | <p>benchy with punctuation marks on it </p> | [
"benchy",
"punctuation"
] | 3D Printers > Test Models | [
"1485918/images/image_1_compressed.jpg",
"1485918/images/image_2_compressed.jpg",
"1485918/images/image_3_compressed.jpg",
"1485918/images/image_4_compressed.jpg"
] | [
"1485918/stls/Sizzling Trug.stl"
] | CC0 | https://www.printables.com/model/1485918 | data_0046.tar |
133297 | Punisher Visualizer | <p>this is a quick and fun accessory to add to your prusa printers. </p><p>a punisher visualiser or visualizer if youre in the US. </p><p> </p><p>i used an 8mm x 3mm neo magnet and superglued that to the back.</p> | [
"prusa",
"visualizer",
"mk3",
"mini",
"visualiser",
"marvel",
"mk3s",
"punisher"
] | 3D Printers > Accessories | [
"133297/images/image_1_compressed.jpg"
] | [
"133297/stls/punisher visualiser (2).stl"
] | CC0 | https://www.printables.com/model/133297 | data_0046.tar |
833047 | Puppy Wall Art | <p>Puppy Wall Art</p> | [] | Art & Design > Wall-mounted | [
"833047/images/image_1_compressed.jpg"
] | [
"833047/stls/Puppy Wall Art.stl"
] | CC0 | https://www.printables.com/model/833047 | data_0046.tar |
213065 | Push Pin Magnet | <p>A push pin style magnet that is perfect for the refrigerator or anywhere else you may hang thins up using magnets. This one is sized to use the smallest magnet of this set I purchased on Amazon:</p><p><a href="https://www.amazon.com/dp/B09TB2JKBS?psc=1&ref=ppx_yo2ov_dt_b_product_details">https://www.amazon.com/d... | [
"magnet"
] | Art & Design > Other Art & Designs | [
"213065/images/image_1_compressed.jpg"
] | [
"213065/stls/push-pin.stl"
] | CC0 | https://www.printables.com/model/213065 | data_0046.tar |
977898 | Push up bar with anti-slip rubber base | <p>The CAD files of this remix were done in onshape and can be found <a href="https://cad.onshape.com/documents/814a0d0cb8d04b870e5080e8/w/c53e6959487660c6d6f9f3d2/e/8a7ff58f8b9d20ae8b8225ac">here</a></p><h4>Print instructions</h4><ul><li>Print the handle using a stiff material. PLA and PETG should work fine. Use 3 per... | [] | Sports & Outdoor > Indoor Sports | [
"977898/images/image_1_compressed.jpg",
"977898/images/image_2_compressed.jpg",
"977898/images/image_3_compressed.jpg"
] | [
"977898/stls/PushUpBar - Handle.stl",
"977898/stls/PushUpBar - Rubber.stl"
] | CC-BY | https://www.printables.com/model/977898 | data_0046.tar |
496329 | Push-push Mechanism | <p>A simple push-on-push-off mechanism that uses a standard ballpoint pen spring. Seems to work well when printed in PETG.</p><p>There are now 3 models:</p><ul><li>The basic mechanism</li><li>A slightly improved mechanism with an actuator arm</li><li>A mechanism with a lightweight enclosure for use as a click fidget</l... | [
"fidget",
"fidgettoy",
"spring",
"latch",
"clicker",
"latching",
"pushpush"
] | Hobby & Makers > Mechanical Parts | [
"496329/images/image_1_compressed.jpg",
"496329/images/image_2_compressed.jpg"
] | [
"496329/stls/clicky-fidget-thing.stl",
"496329/stls/push-push-3.stl",
"496329/stls/push-push-3a.stl",
"496329/stls/push-push-mech.stl"
] | CC-BY | https://www.printables.com/model/496329 | data_0046.tar |
336634 | Putin pawn chess | <p>Print with any settings</p> | [
"figure",
"chess"
] | Toys & Games > Action Figures & Statues | [
"336634/images/image_1_compressed.jpg",
"336634/images/image_2_compressed.jpg"
] | [
"336634/stls/pawn.stl"
] | CC-BY | https://www.printables.com/model/336634 | data_0046.tar |
30546 | Putty knife 5 inches | <p>Quick putty knife that worked great for patching some drywall. The blade is just shy of 5 inches. Easy print on an MK3 with PLA at 0.2mm.</p>
| [] | Household > Other House Equipment | [
"30546/images/image_1_compressed.jpg"
] | [
"30546/stls/putty-knife-5-inches.stl",
"30546/stls/putty-knife_02mm_pla_mk3.stl"
] | CC0 | https://www.printables.com/model/30546 | data_0046.tar |
55607 | Puzzle Organizer Boxes | <p>A good way to optimize your workflow by puzzeling.</p>
<h3>Print instructions</h3><p>Printed in PLA at 0.2mm (standard Prusa Profile) @ Prusa Mini+</p>
<p>You can scale it in XY in nearly every size you need. (The STL ist too big for the Mini). Too smal pritnts can cause too smal gaps between two parts, but half th... | [
"box",
"organizer",
"puzzle",
"stackable",
"puzzlebox"
] | Hobby & Makers > Organizers | [
"55607/images/image_1_compressed.jpg",
"55607/images/image_2_compressed.jpg",
"55607/images/image_3_compressed.jpg",
"55607/images/image_4_compressed.jpg",
"55607/images/image_5_compressed.jpg",
"55607/images/image_6_compressed.jpg"
] | [
"55607/stls/puzzleteil_v1_30mm.stl",
"55607/stls/puzzleteil_v1_50mm.stl",
"55607/stls/puzzleteil_v2_30mm.stl",
"55607/stls/puzzleteil_v2_50mm.stl"
] | CC-BY | https://www.printables.com/model/55607 | data_0046.tar |
955755 | Pyramid Spiral | <p>The pyramid in the pictures has 6 lobes on the screw. Therefore it fits in 3 ways, where 1 way is the “right” one.</p><p> </p><p><a href="https://cad.onshape.com/documents/68c2a9ffc9920f4356fbc0ae/w/f2e672a52f01c9e765fc8eea/e/02045bd3c6b9a8210aafd3b8?renderMode=0&uiState=66a503c22402bd3c1331c8f5">Onshape De... | [
"fidget",
"screw",
"screwable",
"insert",
"pyramid",
"impossible"
] | Art & Design > Sculptures | [
"955755/images/image_1_compressed.jpg",
"955755/images/image_2_compressed.jpg",
"955755/images/image_3_compressed.jpg",
"955755/images/image_4_compressed.jpg"
] | [
"955755/stls/pyramid spiral 6 - base.stl",
"955755/stls/pyramid spiral 6 - core.stl"
] | CC-BY | https://www.printables.com/model/955755 | data_0046.tar |
62186 | Pyrite Circle Penholder - Big Pyrite | <p>Here is a version of the smaller pyrites: <a href="https://www.printables.com/model/63689-pyrite-circle-penholder-small-pyrite">https://www.prusaprinters.org/prints/63689-pyrite-circle-penholder-small-pyrite</a></p><p><strong>Print Settings</strong></p><ul><li><strong>Material:</strong> ecoPla - Satin Purple</li><li... | [
"penholder",
"penholders",
"pyrite"
] | Hobby & Makers > Organizers | [
"62186/images/image_1_compressed.jpg"
] | [
"62186/stls/pyrite_circle_penholder.stl"
] | CC-BY | https://www.printables.com/model/62186 | data_0046.tar |
55654 | Pyrite-like Penholder | <p>Pyrite-like pen holder or vase or whatever you want. Easy to size.</p>
<h3>Print instructions</h3><p>I printed it from Pla, without support, but there is a small point on it where it is a bit overhang, not dangerous, it can be easily repaired with a scalpel.</p> | [
"vase",
"penholder",
"penholders",
"pyrite"
] | Hobby & Makers > Organizers | [
"55654/images/image_1_compressed.jpg",
"55654/images/image_2_compressed.jpg"
] | [
"55654/stls/pyrite-like_penholder.stl"
] | CC0 | https://www.printables.com/model/55654 | data_0046.tar |
989127 | Pétanque, marqueur de points, score counter | <p>Bambulab P1S</p><p>0.4mm nozzle</p><p>0.2mm layer height</p><p>PLA</p><p>3 wall layer</p><p>30% gyroid infill</p><p>Normal support yes </p><p>Top surface smoothing yes</p> | [] | Sports & Outdoor > Outdoor Sports | [
"989127/images/image_1_compressed.jpg",
"989127/images/image_2_compressed.jpg"
] | [
"989127/stls/petanque score.stl"
] | CC-BY | https://www.printables.com/model/989127 | data_0046.tar |
396551 | přívěšek - pendant | <p>přívěšek neboli klíčenka ve tvaru čtyřlístku</p> | [
"3d",
"logo",
"privesek",
"doplnek",
"placka",
"ctyrlistek",
"naklice",
"nove",
"klicena"
] | Fashion > Other Fashion Accessories | [
"396551/images/image_1_compressed.jpg",
"396551/images/image_2_compressed.jpg",
"396551/images/image_3_compressed.jpg"
] | [
"396551/stls/klíčenka čtyřlístek.stl"
] | CC0 | https://www.printables.com/model/396551 | data_0046.tar |
373339 | Přívěšek na klíče "mimozemšťan" | <p>Přívěšek na klíče “mimozemšťan”. Doporučujeme dvoubarevný tisk svítící filament + barevný obličej. Rozměry 34,33 x 41,75 x 2,5 mm (bez očka). Model obsahuje soubory bez očka ("alien") a s očkem na klíče ("alien_keychain"). Gcody se 100% výplní pro vysokou svítivost.</p> | [
"alien",
"keychain",
"privesek",
"klice",
"klic",
"priveseknaklice",
"mimozemstan"
] | Toys & Games > Other Toys & Games | [
"373339/images/image_1_compressed.jpg",
"373339/images/image_2_compressed.jpg"
] | [
"373339/stls/alien.stl",
"373339/stls/alien_keychain.stl"
] | CC-BY | https://www.printables.com/model/373339 | data_0046.tar |
170782 | Q-Tip & Makeup-Pad Storage Cup | <p>The first cup is of the perfect size to fit Q-Tips. </p><p> </p><p>The second one is designed to fit in some bigger makeup pads. </p><p> </p><p>For printing you only need supports for the knob. </p><p> </p><p>Have fun and let me know if you like it in the comments!</p> | [
"cup",
"lid",
"storage",
"storagebox",
"bathroom",
"pads",
"qtip",
"makeup",
"badezimmer"
] | Household > Bathroom | [
"170782/images/image_1_compressed.jpg",
"170782/images/image_2_compressed.jpg"
] | [
"170782/stls/makeup_pad_cup.stl",
"170782/stls/makeup_pad_lid.stl",
"170782/stls/q_tip_cup.stl",
"170782/stls/q_tip_deckel.stl",
"170782/stls/q_tip_knopf.stl"
] | CC0 | https://www.printables.com/model/170782 | data_0046.tar |
1016597 | Qbrick System PRO - desk adapter | <p>The second piece of the adapter must be mirrored.<br>The model is split for easier printing.</p> | [
"adapter",
"pro",
"qbrick"
] | Hobby & Makers > Organizers | [
"1016597/images/image_1_compressed.jpg",
"1016597/images/image_2_compressed.jpg",
"1016597/images/image_3_compressed.jpg",
"1016597/images/image_4_compressed.jpg"
] | [
"1016597/stls/Adapter body.stl",
"1016597/stls/Adapter pin.stl",
"1016597/stls/Qbrick PRO desk adapter.stl"
] | CC0 | https://www.printables.com/model/1016597 | data_0046.tar |
1293002 | QFH Antenna for 435 MHz Satellites | <p>This is a 3D printed spiral support structure for the wires of a 435 MHz QFH antenna. The antenna provides a dome-shaped hemispherical pattern that is suitable for operation (transmit or receive) on various amateur radio orbiting satellites without the need for a motorized tracking system. A video of the... | [] | Learning > Engineering | [
"1293002/images/image_1_compressed.jpg"
] | [
"1293002/stls/435 MHz QFH Spiral RHCP.stl",
"1293002/stls/435 MHz QFH Wire Bending Gauge.stl"
] | CC-BY | https://www.printables.com/model/1293002 | data_0046.tar |
1362731 | Qidi Plus 4 Box Riser | <p>You can find my version 2 here <a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.printables.com/model/1477514-qidi-plus-4-box-riser-v2">https://www.printables.com/model/1477514-qidi-plus-4-box-riser-v2</a></p><p>Qidi Box Riser for mounting above the plus 4. Will clear s... | [
"box",
"qidi",
"plus4"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1362731/images/image_1_compressed.jpg",
"1362731/images/image_10_compressed.jpg",
"1362731/images/image_2_compressed.jpg",
"1362731/images/image_3_compressed.jpg",
"1362731/images/image_4_compressed.jpg",
"1362731/images/image_5_compressed.jpg",
"1362731/images/image_6_compressed.jpg",
"1362731/image... | [
"1362731/stls/FINAL QIDI BOX RISER v2 print.stl"
] | CC0 | https://www.printables.com/model/1362731 | data_0046.tar |
1375453 | Qidi Plus 4 Box Riser remix | <p>I printed it with 20% infill with PETG</p> | [] | 3D Printers > Accessories | [
"1375453/images/image_1_compressed.jpg"
] | [
"1375453/stls/Qidi Box Stand Original Version.stl",
"1375453/stls/Qidi Box Stand Tetto Version.stl"
] | CC0 | https://www.printables.com/model/1375453 | data_0046.tar |
1218802 | Qidi Plus 4 Filament Cutter Arm | <p>About 2 hours into owning the Plus 4, I heard a cracking noise when doing a filament change. Ended up being the cutter arm breaking. Messaged Qidi and they sent me a complete extruder assembly as replacement. Until it arrived, I decided to draw one up. The pink model is the arm drawn like the... | [
"qidi",
"qidiplus4",
"qidiplus"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1218802/images/image_1_compressed.jpg",
"1218802/images/image_2_compressed.jpg",
"1218802/images/image_3_compressed.jpg"
] | [
"1218802/stls/QIDI Filament Cutter Arm V0.stl",
"1218802/stls/QIDI Filament Cutter Arm V4.stl"
] | CC-BY | https://www.printables.com/model/1218802 | data_0046.tar |
1025103 | QIDI Plus4 poop chute | <p>V1.1:</p><ul><li>much smaller back panel</li><li>cleaner model</li></ul><p>PRINT WITH ARACHNE (Orca Slicer: Quality → Wall generator → Arachne). Otherwise the thin support connectors may not print at all.</p><p>-----------------------------------------------</p><p>This is a (relatively) lightweight, easy-to-print sl... | [
"qidi",
"poopchute",
"plus4"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1025103/images/image_1_compressed.jpg"
] | [
"1025103/stls/poop chute v1.1.stl",
"1025103/stls/poop chute v1.stl"
] | CC0 | https://www.printables.com/model/1025103 | data_0046.tar |
971426 | QiDi q1 PRO - stínítko kamery | <p>Stínítko kamery pro QiDi q1 PRO - odstínění svitu z osvětlení uvnitř komory. Vytištěno z PLA - zatím mi drží, ale rozumnější bude např ASA, nebo jiný teplotně odolnější materiál, neboť q1 PRO má vyhřívanou komoru, až na 60°C.</p><ul><li><strong>Materiál </strong>- PLA</li><li><strong>Podpěry</strong> - NE</li><li><s... | [
"camera",
"kamera",
"qidi",
"qidiq1"
] | 3D Printers > Accessories | [
"971426/images/image_1_compressed.jpg"
] | [
"971426/stls/qidi_stinitko_kamery_delsi.stl"
] | CC-BY | https://www.printables.com/model/971426 | data_0046.tar |
861717 | QIDI Q1 Pro Activated Carbon Box | <p>The original QIDI activated carbon box keep a lot of space where the heat from the internal chamber will enter to electronics chamber… with this mod we reduce this negative air flow and increase the amount of activated carbon to filter air.</p> | [
"qidi",
"qiditech",
"qidiq1"
] | 3D Printers > Other Printer Parts & Upgrades | [
"861717/images/image_1_compressed.jpg",
"861717/images/image_2_compressed.jpg",
"861717/images/image_3_compressed.jpg",
"861717/images/image_4_compressed.jpg"
] | [
"861717/stls/3Dwork_QIDI_Q1Pro_ActivatedCarbonBOX_Box-Main.stl",
"861717/stls/3Dwork_QIDI_Q1Pro_ActivatedCarbonBOX_Cover-Main.stl"
] | CC-BY | https://www.printables.com/model/861717 | data_0046.tar |
1205523 | Qidi Q1 Pro Cartographer Mount | <p>This is a mount for the Cartographer3d eddy probe. I used the standard probe but the right angle model would probably fit better. </p><p>The original inductive probe mount location and hardware is used. </p><p>two M3x5x4 heat set inserts are used for mounting the probe. </p><p>The probe offsets are x ... | [
"q1",
"q1pro"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1205523/images/image_1_compressed.jpg"
] | [
"1205523/stls/Cartographer Q1 Pro Side Mount.stl",
"1205523/stls/Cartographer Standard Side Mount V4 Compatible.stl"
] | CC-BY | https://www.printables.com/model/1205523 | data_0046.tar |
1034717 | Qidi Q1 Pro simple door catch | <p>Door catch with magnets that hold the door of Qidi Q1 Pro slightly ajar for printing of low temperature filaments, eg. TPU & PLA.</p><p>Small holder clips inside door to provide stow position when not in use.</p> | [
"door",
"low",
"temperature",
"magnetic",
"pro",
"latch",
"catch",
"q1",
"qidi"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1034717/images/image_1_compressed.jpg",
"1034717/images/image_2_compressed.jpg",
"1034717/images/image_3_compressed.jpg",
"1034717/images/image_4_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/1034717 | data_0046.tar |
902461 | Qidi Q1 Pro simple door holder for low temp printing - PLA, TPU, PETG | <p>I didn't like the fact that the door felt a bit flimsy when opened, so I made this simple part.</p><p> </p><p>It requires 2 x small magnets. </p><p>I used 5x3mm magnets, but you can change parameters of those in project files. <br>Step and Fusion files provided. Just change parameters in “modify” sect... | [
"holder",
"door",
"tpu",
"spacer",
"pla",
"petg",
"doorholder",
"q1",
"qidi",
"qiditech",
"q1pro"
] | 3D Printers > Other Printer Parts & Upgrades | [
"902461/images/image_1_compressed.jpg",
"902461/images/image_2_compressed.jpg",
"902461/images/image_3_compressed.jpg",
"902461/images/image_4_compressed.jpg",
"902461/images/image_5_compressed.jpg",
"902461/images/image_6_compressed.jpg",
"902461/images/image_7_compressed.jpg",
"902461/images/image_8... | [
"902461/stls/qidi_q1_door_holder_5mm_3mm.stl"
] | CC-BY | https://www.printables.com/model/902461 | data_0046.tar |
1517496 | Qidi Q2 Filament Waste Bin | [
"qidiq2"
] | 3D Printers > Accessories | [
"1517496/images/image_1_compressed.jpg",
"1517496/images/image_2_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/1517496 | data_0046.tar | |
1554491 | Qidi Q2 Handle Extension | <p>The original handle is inserted into cut out and attached to the door with existing screws. </p><p>I printed mine in PETG on the face of the handle. Small support is needed inside the cut out shape of the factory handle. I enabled normal auto supports. I change "Support/object xy distanc... | [
"qidi",
"q2",
"qidiq2"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1554491/images/image_1_compressed.jpg",
"1554491/images/image_2_compressed.jpg"
] | [
"1554491/stls/Qidi knob insert .5 gap.stl",
"1554491/stls/Qidi knob insert.stl"
] | CC-BY | https://www.printables.com/model/1554491 | data_0046.tar |
1572010 | QIDI Q2 Poop Chute 52g | <p><strong>Function</strong>：Guide waste material to slide down from the left side of the printer via the chute. </p><p><strong>Key Features</strong></p><p> 1. No original part replacement, easy installation</p><p> 2. Metal-free, fully 3D-printed </p><p>3. Printable with any material</p><p> 4. Only 51g, easy to print ... | [
"qidi",
"q2",
"poopchute",
"qidiq2"
] | 3D Printers > Anycubic Parts & Upgrades | [
"1572010/images/image_1_compressed.jpg",
"1572010/images/image_2_compressed.jpg",
"1572010/images/image_3_compressed.jpg",
"1572010/images/image_4_compressed.jpg"
] | [
"1572010/stls/Q2 Poop Chute.stl",
"1572010/stls/QIDI Q2 Poop Chute 52g.stl"
] | CC-BY | https://www.printables.com/model/1572010 | data_0046.tar |
1636257 | Qidi Q2 RISER PTFE TUBE LIFT & ALIGN CABLE CHAIN CLIP V1 | <p>for qidi q2 with riser </p><p>got the qidi💩box for my q2 and in the intial headache stage of getting this pos working right</p><p>Unhappy with the stock cable chain clips and with hope of smoother filament changing i desinged this to help lift the ptfe tube and give it some more room to move along x and y axis... | [
"qidi",
"q2",
"qidibox"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1636257/images/image_1_compressed.jpg",
"1636257/images/image_2_compressed.jpg",
"1636257/images/image_3_compressed.jpg",
"1636257/images/image_4_compressed.jpg",
"1636257/images/image_5_compressed.jpg",
"1636257/images/image_6_compressed.jpg"
] | [
"1636257/stls/qidi q2 drag chain ptfe holder clip.stl",
"1636257/stls/qidi q2 drag chain ptfe holder.stl"
] | CC0 | https://www.printables.com/model/1636257 | data_0046.tar |
1604557 | Qidi Q2 Side Light Brackets | <p>NOW UPDATED TO NOT RELY ON ADHESIVE -- USE 3MF FOR UPDATED GEOMETRY AND SLICING PARAMETERS</p><p></p><p>Use the preexisting 3X M3 plastic screws to mount the bracket on each side, then use double sided adhesive to mount your strips to the brackets.</p><p>Ensure to print with a higher temp material to handle the encl... | [
"qidi",
"qidi3d",
"qidiq2"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1604557/images/image_1_compressed.jpg",
"1604557/images/image_2_compressed.jpg",
"1604557/images/image_3_compressed.jpg"
] | [
"1604557/stls/LH Light Bracket.stl"
] | CC0 | https://www.printables.com/model/1604557 | data_0046.tar |
155501 | Qidi X-Max (X-Plus) Internal Filament Guide v2 | <p><strong>SUMMARY</strong></p><p>This internal filament guide set works with X-Max and probably the X-Plus. It replaces the simple OEM vertical guide with a 4mm ID X 6mm OD PTFE tube that runs from the spool to the extruder. There are four parts: Upper Guide, Lower Guide, Lower Guide Standoff, and PTFE Tube connector ... | [
"filamentguide",
"qidi",
"xmax",
"xplus"
] | 3D Printers > Other Printer Parts & Upgrades | [
"155501/images/image_1_compressed.jpg",
"155501/images/image_2_compressed.jpg",
"155501/images/image_3_compressed.jpg"
] | [
"155501/stls/Guide Lower Standoff.stl",
"155501/stls/Guide Lower.stl",
"155501/stls/Guide Upper.stl",
"155501/stls/PTFE Tube Connector.stl"
] | CC-BY | https://www.printables.com/model/155501 | data_0046.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.