model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
1260195 | QIDI X-Max 3 (Post Extruder) Filament cutter (Updated) | <p>Updated: (11/4/2025)</p><p>This Extruder Assembly has been working well for me so I'm going to call it good enough. Feel free to remix as you need!</p><p><a href="https://vimeo.com/manage/videos/1077693101/502d7b66e4">https://vimeo.com/manage/videos/1077693101/502d7b66e4</a></p><p>---------------------------------</... | [
"extruder",
"filamentcutter",
"qidi",
"qidixmax3"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1260195/images/image_1_compressed.jpg",
"1260195/images/image_2_compressed.jpg",
"1260195/images/image_3_compressed.jpg",
"1260195/images/image_4_compressed.jpg",
"1260195/images/image_5_compressed.jpg",
"1260195/images/image_6_compressed.jpg",
"1260195/images/image_7_compressed.jpg",
"1260195/images... | [
"1260195/stls/Head_Cutter.stl"
] | CC-BY | https://www.printables.com/model/1260195 | data_0046.tar |
1159992 | QMXmicro - A small case for the QRP Labs QMX radio | <p>A minimal set of covers for the <strong>QRP Labs QMX</strong> radio transceiver. The case is a little bit smaller than the QRP Labs metal case and about half the weight.</p><p>Here is the <a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://makerworld.com/en/models/389757-qmxmicro-... | [
"hamradio",
"ham",
"qrplabs",
"qmx"
] | Hobby & Makers > Electronics | [
"1159992/images/image_1_compressed.jpg",
"1159992/images/image_2_compressed.jpg",
"1159992/images/image_3_compressed.jpg"
] | [
"1159992/stls/Bottom cover.stl",
"1159992/stls/Top cover.stl"
] | CC-BY | https://www.printables.com/model/1159992 | data_0046.tar |
111059 | Quacks box, flat and taller | <p>Resized and adjusted the bottom to be flat so they could print faster and hold the expansion pieces. The flat bottom means that it will not stack as nice as the original, also you need to remove the insert from the box to fit all the boxes and parts if you have the expansions. Printed at .3, 10-15% infill, the origi... | [
"box",
"boardgame",
"quacksofquedlinburg"
] | Toys & Games > Board Games | [
"111059/images/image_1_compressed.jpg"
] | [
"111059/stls/three tray.stl",
"111059/stls/two tray.stl"
] | CC0 | https://www.printables.com/model/111059 | data_0046.tar |
199409 | Quacks of Quedlinburg Crate Covers (Fixed) |
<p>I really liked the lids I found but had some printing issues so I rebuilt their icons to print better (at least on my printer).</p>
Category: Games
| [
"thingiverse"
] | Toys & Games > Other Toys & Games | [
"199409/images/image_1_compressed.jpg",
"199409/images/image_2_compressed.jpg",
"199409/images/image_3_compressed.jpg",
"199409/images/image_4_compressed.jpg",
"199409/images/image_5_compressed.jpg",
"199409/images/image_6_compressed.jpg",
"199409/images/image_7_compressed.jpg",
"199409/images/image_8... | [
"199409/stls/QoQ_SmallLid_Crow-Fixed.stl",
"199409/stls/QoQ_SmallLid_Ghost-Fixed.stl",
"199409/stls/QoQ_SmallLid_Locoweed-Fixed.stl",
"199409/stls/QoQ_SmallLid_Mandrake-Fixed.stl",
"199409/stls/QoQ_SmallLid_Moth-Fixed.stl",
"199409/stls/QoQ_SmallLid_Pumpkin-Fixed.stl",
"199409/stls/QoQ_SmallLid_Spider-F... | CC-BY | https://www.printables.com/model/199409 | data_0046.tar |
1071766 | Quad Lock to Lanyard | <p>A simple adapter to add a lanyard to your phone using Quad Lock.</p> | [
"lanyard",
"quadlock",
"teather"
] | Gadgets > Portable Devices | [
"1071766/images/image_1_compressed.jpg",
"1071766/images/image_2_compressed.jpg"
] | [
"1071766/stls/Quad Lock to Lanyard.stl"
] | CC0 | https://www.printables.com/model/1071766 | data_0046.tar |
66448 | Quadlock gopro mount | <p>Thx to Philip9933 for the support model (perfect fit).</p><p>Add a Nylon lock nut and print in PETG (or sla)</p><p>Gcode for MK3S (tuned.. bed heating > calibration > head heating > print !)</p><p> </p> | [
"gopro",
"quad",
"mount",
"lock",
"cameramount",
"bike",
"motorcycle",
"quadlock"
] | Gadgets > Photo & Video | [
"66448/images/image_1_compressed.jpg",
"66448/images/image_2_compressed.jpg",
"66448/images/image_3_compressed.jpg"
] | [
"66448/stls/Quadlock gopro final.stl"
] | CC0 | https://www.printables.com/model/66448 | data_0046.tar |
593335 | Quansheng UV-K5 knobs - Knoflík pro Quansheng UV-K5 | <p>New knob for Quansheng UV-K5 if you lost it or just don't like the color or shape of it. With a button, you can print from ASA and smooth it nicely with acetone vapors.</p><p><strong>Print parameters</strong><br><strong>Nozzle:</strong><i> 0,4 - O,2</i><br><strong>Supports:</strong><i> NO</i><br><strong>Material:</s... | [
"knob",
"knobs",
"button",
"radio",
"ham",
"baofeng",
"moded",
"radioamateur",
"quansheng",
"uvk5",
"ok2hss"
] | Gadgets > Other Gadgets | [
"593335/images/image_1_compressed.jpg",
"593335/images/image_10_compressed.jpg",
"593335/images/image_11_compressed.jpg",
"593335/images/image_12_compressed.jpg",
"593335/images/image_2_compressed.jpg",
"593335/images/image_3_compressed.jpg",
"593335/images/image_4_compressed.jpg",
"593335/images/imag... | [
"593335/stls/Quansheng UV-K5 all knobs_fixed.stl",
"593335/stls/Quansheng UV-K5 knobs knurled_fixed.stl",
"593335/stls/Quansheng UV-K5 kross knobs_fixed.stl",
"593335/stls/Quansheng UV-K5 lowpoly knobs_fixed.stl",
"593335/stls/Quansheng UV-K5 silk knobs_fixed.stl"
] | CC-BY | https://www.printables.com/model/593335 | data_0046.tar |
1326501 | Quansheng UV-K5 MOLLE Mount | <p>Its a 2-way Molle mount for a Quansheng UV-K5 radios. Can also be used in other 25mm strapping.</p><p>The mount uses a small nub against a rivet in the clip, to better secure the radio clip in place. </p><p> </p><h5>Print settings:</h5><ul><li>Best printed in 0.2mm layers</li><li>No supports needed, but ca... | [
"radio",
"backpack",
"molle",
"ht",
"quansheng",
"uvk5"
] | Sports & Outdoor > Outdoor Sports | [
"1326501/images/image_1_compressed.jpg",
"1326501/images/image_2_compressed.jpg"
] | [
"1326501/stls/quansheng_clip.stl"
] | CC-BY | https://www.printables.com/model/1326501 | data_0046.tar |
1034954 | Quarter Kilo (small) spool adapter for Bambu AMS | <p>After acquiring a Bambu Lab P1S with an AMS, I suddenly found my collection of tiny quarter kilo spools to be sad and useless. </p><figure class="image image_resized" style="width:39.94%;"><img src="https://media.printables.com/media/prints/1034954/rich_content/23ccd5b3-033d-4ead-84d7-0f9d95ffde2d/hm1.png#%7B%2... | [
"spool",
"holder",
"spoolholder",
"spooladapter",
"smallspool"
] | 3D Printers > Accessories | [
"1034954/images/image_1_compressed.jpg"
] | [
"1034954/stls/AMS-QK-F.stl",
"1034954/stls/AMS-QK-M.stl"
] | CC-BY | https://www.printables.com/model/1034954 | data_0046.tar |
490025 | Quarter LED Matrix Grid 16x16 for 32x32 Matrix | <p>remake of another model. Added features.<br><br>Dimensions</p><ul><li>170mm x 170mm x 5mm (L x W x H) excluding dovetail</li><li>counter-sunk m3 holes</li><li>parts clearance (0.8mm)</li></ul><p>Features</p><ul><li>parts clearance</li><li>dove tail for connecting the four pieces</li><li>small inlet for the PCB to al... | [
"led",
"leds",
"matrix",
"wled",
"neopixelmatrix"
] | Hobby & Makers > Other Ideas | [
"490025/images/image_1_compressed.jpg",
"490025/images/image_2_compressed.jpg",
"490025/images/image_3_compressed.jpg"
] | [
"490025/stls/QuarterLEDMatrixGrid16x16.stl"
] | CC0 | https://www.printables.com/model/490025 | data_0046.tar |
375171 | Quarter or Euro Prison (Coin Trap) | <p>A fun little coin trap with an interesting geometric design on the outside and a perfect sphere on the inside. The internal sphere itself is large enough to accommodate a coin up to 35 mm in diameter. But the outer shapes will only allow coins under 22 mm to escape, making it a perfect little prison for ... | [
"coin",
"money",
"euro",
"coins",
"quarter",
"cointrap"
] | Toys & Games > Puzzles & Brain-teasers | [
"375171/images/image_1_compressed.jpg",
"375171/images/image_2_compressed.jpg",
"375171/images/image_3_compressed.jpg",
"375171/images/image_4_compressed.jpg"
] | [
"375171/stls/Quarter Prison.stl"
] | CC-BY | https://www.printables.com/model/375171 | data_0046.tar |
295356 | Quarter Roll Sorter - US $10 Stacker | <p>Print is designed to stack $10 worth of US Quarters for sorting/wrapping, quickly. </p><p>There is a slight gap at the top, approximately one quarter size, as to provide space for moving the coins. <strong>Double check the value when stacking $10 worth.</strong> </p><p>Printed in PETG however any material ... | [
"money",
"moneysorter"
] | Gadgets > Other Gadgets | [
"295356/images/image_1_compressed.jpg",
"295356/images/image_2_compressed.jpg",
"295356/images/image_3_compressed.jpg",
"295356/images/image_4_compressed.jpg",
"295356/images/image_5_compressed.jpg",
"295356/images/image_6_compressed.jpg"
] | [
"295356/stls/US $10 Quarter Sorter v1.stl"
] | CC-BY | https://www.printables.com/model/295356 | data_0046.tar |
327795 | Quest 2 Link Cable Clip | <p>Simple cable clip for the Quest 2 Elite Strap. Designed around the official Oculus Link cable, but will work with most.</p><p>I purchased a link cable alongside the original Oculus Quest and wanted a connector specifically for the Quest 2.</p> | [
"oculusquest2",
"oculusquest2strap",
"quest2",
"oculuslink"
] | Gadgets > Video Games | [
"327795/images/image_1_compressed.jpg",
"327795/images/image_2_compressed.jpg"
] | [
"327795/stls/Quest2Link.stl"
] | CC-BY | https://www.printables.com/model/327795 | data_0046.tar |
614080 | Quest3 Controller Stand | This is a stand for Quest 3 controller.
It can be used either front to back or left to right. | Download free 3D printable STL models | [
"quest3"
] | Gadgets > Video Games | [
"614080/images/image_1_compressed.jpg",
"614080/images/image_2_compressed.jpg"
] | [
"614080/stls/stand00.stl"
] | CC0 | https://www.printables.com/model/614080 | data_0046.tar |
88634 | Quick and easy keyring (10 min) | [
"keyring"
] | Hobby & Makers > Other Ideas | [
"88634/images/image_1_compressed.jpg",
"88634/images/image_2_compressed.jpg"
] | [
"88634/stls/Key.stl"
] | CC-BY | https://www.printables.com/model/88634 | data_0046.tar | |
514341 | Quick Brush Holder for Oral B iO | <p>Printed with Prusament Marble Grey PLA</p><p>Can be printed in less than 15 minutes and minimal filament usage to replace it over time if the print gets greasy between the layers</p> | [
"oralb",
"brushholder"
] | Household > Bathroom | [
"514341/images/image_1_compressed.jpg",
"514341/images/image_2_compressed.jpg",
"514341/images/image_3_compressed.jpg"
] | [
"514341/stls/single_holder_for_OralB_iO.stl"
] | CC0 | https://www.printables.com/model/514341 | data_0046.tar |
143489 | Quick Grip corner pads |
<p>These are replacement pads for quick-grip tools that allow you to use your clamp to hold two pieces of material at a 90 degree angle.</p>
<p>These pads are designed to fit standard quick-grip clamps from the Irwin brand, but may fit others.</p>
<p>One side of the clamp interface is open, allowing you to slide the... | [
"frame",
"clamp",
"tools",
"framing",
"thingiverse",
"90degree",
"irwin",
"quickgrip",
"irwinquickgrip"
] | Hobby & Makers > Other Ideas | [
"143489/images/image_1_compressed.jpg",
"143489/images/image_2_compressed.jpg",
"143489/images/image_3_compressed.jpg",
"143489/images/image_4_compressed.jpg",
"143489/images/image_5_compressed.jpg",
"143489/images/image_6_compressed.jpg"
] | [
"143489/stls/Quick-Grip_-_Corner_Grip.stl",
"143489/stls/Quick-Grip_Corner_Pad.stl"
] | CC-BY | https://www.printables.com/model/143489 | data_0046.tar |
269147 | Quick Parametric Filament Swatches | <p>Using 'FreeCAD' and its inbuilt spreadsheet you can create your own Filament Swatches in seconds.</p><p>Details include Material, Brand and Colour.</p><p>I believe that with my instructions below that even a complete novice of CAD systems should be able to produce these Filament Swatches.</p><p>For a number of years... | [] | 3D Printers > Test Models | [
"269147/images/image_1_compressed.jpg",
"269147/images/image_2_compressed.jpg",
"269147/images/image_3_compressed.jpg",
"269147/images/image_4_compressed.jpg",
"269147/images/image_5_compressed.jpg"
] | [
"269147/stls/Hexagon End Block.stl",
"269147/stls/Hexagonal bar and end blocks.stl",
"269147/stls/Hexagonal Bar.stl",
"269147/stls/PLA - PRUSA - Azure Blue.stl",
"269147/stls/PLA - PRUSA - Galaxy Black.stl",
"269147/stls/PLA - PRUSA - Galaxy Purple.stl"
] | CC0 | https://www.printables.com/model/269147 | data_0046.tar |
1088307 | Quick Print Spool for Bambu Lab Refill | [
"spool",
"filamentspool",
"bambuspool",
"bamburefill"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"1088307/images/image_1_compressed.jpg",
"1088307/images/image_2_compressed.jpg",
"1088307/images/image_3_compressed.jpg"
] | [
"1088307/stls/Spool Half_60W spindle 68 OW BL key.stl",
"1088307/stls/Spool Half_60W spindle 68 OW.stl"
] | CC-BY | https://www.printables.com/model/1088307 | data_0046.tar | |
122009 | Quick Print-In-Place Fold-Flat Phone Holder | <p>Very slim and (relatively) quick to print fold-flat phone stand. Prints as one piece with integrated hinges. Clearances between the various moving parts are 0.5mm.</p> | [
"phonestand",
"printinplace",
"folding",
"hinged",
"slim",
"foldingstand",
"slimprint"
] | Gadgets > Portable Devices | [
"122009/images/image_1_compressed.jpg",
"122009/images/image_2_compressed.jpg",
"122009/images/image_3_compressed.jpg",
"122009/images/image_4_compressed.jpg",
"122009/images/image_5_compressed.jpg"
] | [
"122009/stls/folding phone holder.stl"
] | CC-BY | https://www.printables.com/model/122009 | data_0046.tar |
399622 | Quick Release Handle Kit for Feedback Sports “Sport Mechanic” Bike Repair Stand | <p>Reference the attached .PDF file for more information on printing and assembly!</p><p>The Quick Release Handle Kit was created to solve a very real (to my brother, wife, and myself at least) problem: it is more difficult and time consuming to place a bike in the Feedback Sports “Sport Mechanic” bike repair stand tha... | [
"stand",
"repair",
"bike",
"bikestand",
"roadbikestand",
"bikerepairstand",
"feedbacksports",
"sportsmechanic"
] | Sports & Outdoor > Outdoor Sports | [
"399622/images/image_1_compressed.jpg"
] | [
"399622/stls/quick release handle - big bolt connector.stl",
"399622/stls/quick release handle - handle - nut.stl",
"399622/stls/quick release handle - handle-heatset.stl",
"399622/stls/quick release handle - knob spacer-washer.stl",
"399622/stls/quick release handle - knob spacer.stl",
"399622/stls/quick... | GPL2.0 | https://www.printables.com/model/399622 | data_0046.tar |
304390 | Quick Tweezer Cap | <p>I printed mine in TPU to give it a little flex but PLA will work plenty well. Will work for a number of different sized tweezers but can be scaled if need be. Designed with 2 x 0.8mm walls for easier printing. Even in TPU mine only took 8 minutes!</p><p>Note: Please excuse my scruffy print, I need to dry my TPU but ... | [
"tpu",
"quickprint",
"tweezer",
"tweezercap"
] | Hobby & Makers > Tools | [
"304390/images/image_1_compressed.jpg"
] | [
"304390/stls/tweezer cap.stl"
] | CC-BY | https://www.printables.com/model/304390 | data_0046.tar |
500838 | Quick-print box fan air filter clip | <p>JUL 2026 UPDATE: Added "flipped" versions which should fit fans that are a bit wider. The 26mm flipped should fit the current Lasko 20-inch box fans, and you can take advantage of the feet to hold the filter in well enough with only two clips. I've also made "long" versions which have a longer overhang, for extra op... | [
"box",
"filter",
"air",
"fan",
"hepa",
"filtration"
] | Household > Other House Equipment | [
"500838/images/image_1_compressed.jpg",
"500838/images/image_2_compressed.jpg"
] | [
"500838/stls/Box Fan Filter Mount - 22mm Flipped Long.stl",
"500838/stls/Box Fan Filter Mount - 22mm Flipped.stl",
"500838/stls/Box Fan Filter Mount - 22mm Long.stl",
"500838/stls/Box Fan Filter Mount - 22mm.stl",
"500838/stls/Box Fan Filter Mount - 24mm Flipped Long.stl",
"500838/stls/Box Fan Filter Moun... | CC-BY | https://www.printables.com/model/500838 | data_0046.tar |
1779045 | Quick-Release Shopping Cart Token | Ergonomischer Einkaufswagen-Chip (Removable) | <p>DEUTSCH:</p><p>Ein praktischer Einkaufswagenlöser, den man nach dem Entriegeln sofort wieder abziehen kann. Man muss den Schlüsselbund also nicht am Wagen hängen lassen!</p><p>Druckeinstellungen:</p><p>- Schichthöhe: 0.20 mm</p><p>- Infill: 100% </p><p>- Wände: 3-4</p><p>- Support: Nein</p><p>---</p><p>ENGLISH:</p><... | [
"printinplace",
"quickprint",
"token",
"shoppingcart",
"easyprint",
"quickrelease",
"carry",
"trolley",
"everydaycarry",
"trolleytoken",
"einkaufswagenchip",
"trollychip",
"trollycoin",
"supermarkt"
] | Household > Other House Equipment | [
"1779045/images/image_1_compressed.jpg",
"1779045/images/image_2_compressed.jpg",
"1779045/images/image_3_compressed.jpg"
] | [
"1779045/stls/Einkaufswagenlöser.stl"
] | CC-BY | https://www.printables.com/model/1779045 | data_0046.tar |
82331 | Quidditch Pong Hoops (Unofficial) |
<p>(Also Quidditch Beirut, for the traditionalists ;) )</p>
<p>This is a simple "Quidditch" hoop set for the increasingly popular Quiddich Pong game. Its basically American Beer Pong with hoops added to the game board for more complex gameplay.</p>
<p>I have included a simple printable rod (with ends that should snug ... | [
"thingiverse"
] | Toys & Games > Outdoor Toys | [
"82331/images/image_1_compressed.jpg",
"82331/images/image_2_compressed.jpg",
"82331/images/image_3_compressed.jpg",
"82331/images/image_4_compressed.jpg",
"82331/images/image_5_compressed.jpg"
] | [
"82331/stls/Quiddich_Hoop_Ring_and_Base.stl",
"82331/stls/Quiddich_Hoop_Rod_1.1.stl"
] | GPL2.0 | https://www.printables.com/model/82331 | data_0046.tar |
1322979 | Quiet 4040 Fan Grill/Cover (with holes) | <p>I liked the original idea but I needed a version for use with 4 screws. And because TinkerCad couldn't open the original, I had to quickly redraw it in Fusion360. </p><p>I have no idea if it is actually quieter than other covers. </p> | [
"fancover",
"4040fangrill",
"4040fan"
] | Hobby & Makers > Electronics | [
"1322979/images/image_1_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/1322979 | data_0046.tar |
467097 | Quiet cooler for Deye 12K Inverter | <p>The cooler prints in two parts that is glued together. The three "sticks" that is printed with part 1 is used to strengthen the join. Glue them on the inside over the the join.<br>There is a holder for the HW-585 12V fan controller</p><p>You will need:</p><ul><li>3 * 120 mm PWM fans (I used Noctua NF-A12x25 PWM)</li... | [
"cooler",
"inverter",
"deye"
] | Gadgets > Other Gadgets | [
"467097/images/image_1_compressed.jpg",
"467097/images/image_2_compressed.jpg",
"467097/images/image_3_compressed.jpg",
"467097/images/image_4_compressed.jpg"
] | [
"467097/stls/InverterCooler.stl",
"467097/stls/InverterCoolerPart1.stl",
"467097/stls/InverterCoolerPart2.stl"
] | CC-BY | https://www.printables.com/model/467097 | data_0046.tar |
356715 | QuinLED Dig Quad ESP32-ABE V3 case | <p>This is a remix of QuinLed Dig Quad case by subboo on thingiverse. See link to his design</p><p>This a case for the quinled dig quad v3 with ethernet (abe)</p><p>I include the step file if you wish to make changes. I provide a couple of variations. This uses the same hardware as listed by the original designer at th... | [
"case",
"esp32",
"abe",
"quinleddigquad",
"abev3",
"quinleddigquadv3"
] | Hobby & Makers > Electronics | [
"356715/images/image_1_compressed.jpg"
] | [
"356715/stls/digquadwithabev3_case_base.stl",
"356715/stls/digquadwithabev3_case_base_feet.stl",
"356715/stls/digquadwithabev3_case_lid.stl",
"356715/stls/digquadwithabev3_case_lid_recess.stl"
] | CC-BY | https://www.printables.com/model/356715 | data_0046.tar |
64396 | Quirky pencil holder | <p>I wanted a pencil holder & this is the unfortunate result. It might even be useful.</p> | [
"pencil",
"pencilholder",
"openscad"
] | Art & Design > Other Art & Designs | [
"64396/images/image_1_compressed.jpg",
"64396/images/image_2_compressed.jpg",
"64396/images/image_3_compressed.jpg",
"64396/images/image_4_compressed.jpg",
"64396/images/image_5_compressed.jpg"
] | [
"64396/stls/pencil.chamfer.stl",
"64396/stls/pencil.nofrill.rand.stl",
"64396/stls/pencil.nofrills.wave2.stl",
"64396/stls/pencil.rand.div1.stl",
"64396/stls/pencil.rand.div2.stl",
"64396/stls/pencil.rand.infil.stl",
"64396/stls/pencil.randsept.13.stl",
"64396/stls/pencil.towertest.14.stl",
"64396/s... | CC-BY | https://www.printables.com/model/64396 | data_0046.tar |
1085818 | quoridor - pac-man version | <p>quoridor game, inspired in asmodee board game. All printed in PLA. Figures in 0.08 layer and no need to use supports, perhaps brim.</p><p>box included, can store 11x11 board and all figures, if you need box for 9x9 or customize, you can do easily with f3d model included.</p><p> </p><p>cheers</p><p> </p> | [
"pacman",
"asmodee",
"quoridor",
"quoridorboard"
] | Toys & Games > Board Games | [
"1085818/images/image_1_compressed.jpg",
"1085818/images/image_2_compressed.jpg",
"1085818/images/image_3_compressed.jpg"
] | [
"1085818/stls/ball x4.stl",
"1085818/stls/board v1 x4.stl",
"1085818/stls/board v2 x4.stl",
"1085818/stls/box bottom.stl",
"1085818/stls/box.stl",
"1085818/stls/life x4.stl",
"1085818/stls/pac-man.stl",
"1085818/stls/phantom body x4.stl_6.stl",
"1085818/stls/phantom x4.stl_5.stl",
"1085818/stls/wa... | CC-BY | https://www.printables.com/model/1085818 | data_0046.tar |
158580 | R2D2 Star Wars Robot | [] | Toys & Games > Action Figures & Statues | [
"158580/images/image_1_compressed.jpg"
] | [
"158580/stls/NEWEST_2017.stl"
] | CC0 | https://www.printables.com/model/158580 | data_0046.tar | |
1248495 | R6 Roblox figure (with joints) | <p>I haven't seen many roblox figures with joints, so here. The tolerances might be too tight or too loose. PETG would probably work best for this, but PLA works too. However, it does get very loose after a day.</p><p>Note: My friend told me that if the joints are too loose, putting clay helps.</p><p>Changelog thing:</... | [
"roblox",
"robloxtoy"
] | Toys & Games > Action Figures & Statues | [
"1248495/images/image_1_compressed.jpg",
"1248495/images/image_2_compressed.jpg"
] | [
"1248495/stls/Roblox Figure V2.stl",
"1248495/stls/Roblox Figure V3.stl",
"1248495/stls/Roblox Figure.stl"
] | CC-BY | https://www.printables.com/model/1248495 | data_0046.tar |
123260 | Raaco Drawer Divider | <p>Simple divider for Raaco 150-00 ("small") drawers. Made with SolveSpace.</p> | [
"cabinet",
"raaco",
"drawerdivider"
] | Hobby & Makers > Organizers | [
"123260/images/image_1_compressed.jpg",
"123260/images/image_2_compressed.jpg"
] | [
"123260/stls/Raaco Divider.stl"
] | CC0 | https://www.printables.com/model/123260 | data_0046.tar |
395092 | Raccoon Bard | <p>Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a href="https://www.patreon.com/mz4250">https://www.patreon.com/mz4250</a></p><p>Patrons have access to all my files in one place, a request board, as well ... | [
"bard",
"raccoon"
] | Tabletop Miniatures > Characters & Monsters | [
"395092/images/image_1_compressed.jpg"
] | [
"395092/stls/Raccoon Bard with Lute presupported.stl",
"395092/stls/Raccoon Bard with Lute.stl"
] | CC-BY | https://www.printables.com/model/395092 | data_0046.tar |
317730 | Racing drivers and many more bobbleheads | <p>This is a remix of 3D Printy's Emoji Printer Bobbleheads to allow the fitting of my racing driver and other figure heads (which I've also included in this model). Due to the additional weight I find it best to use the “Stiff” spring from the original model and use a material with a bit more flex like PETG or ABS (I ... | [
"batman",
"deadpool",
"venom",
"spiderman",
"helmet",
"police",
"racing",
"formula1",
"f1",
"cowboy",
"cowgirl",
"driver",
"bobblehead",
"bobble",
"russell",
"verstappen",
"maxverstappen",
"hamilton",
"lewishamilton",
"ricciardo",
"leclerc",
"bobbletoy",
"racingdriver",
... | Toys & Games > Action Figures & Statues | [
"317730/images/image_1_compressed.jpg",
"317730/images/image_10_compressed.jpg",
"317730/images/image_11_compressed.jpg",
"317730/images/image_12_compressed.jpg",
"317730/images/image_13_compressed.jpg",
"317730/images/image_14_compressed.jpg",
"317730/images/image_15_compressed.jpg",
"317730/images/i... | [
"317730/stls/Alonso helmet V2 (magenta).stl",
"317730/stls/Alonso helmet V2 (navy).stl",
"317730/stls/Alonso helmet V2 (pink).stl",
"317730/stls/Alonso helmet V2 (white).stl",
"317730/stls/Batman head details.stl",
"317730/stls/Batman head eyes.stl",
"317730/stls/Batman head.stl",
"317730/stls/Batman ... | CC-BY | https://www.printables.com/model/317730 | data_0046.tar |
87256 | Rack for Cable Storage | <p>I made lot of models with 3D printer during last 4 years.<br>Some of them were exposed on my stall at Maker Faire Prague 2021.<br>Now I would like to offer some of them for other 3D printing guys.</p><p>There is one small and simple rack for cable storage in office, workshop or kitchen.</p><p>It can be printed with ... | [
"cable",
"storage",
"rack"
] | Hobby & Makers > Organizers | [
"87256/images/image_1_compressed.jpg"
] | [
"87256/stls/Rack for Cable Storage.stl"
] | GPL3.0 | https://www.printables.com/model/87256 | data_0046.tar |
1014532 | Rackett | <p>I made a Rackett! After some searching, i found some <a href="https://archive.org/details/a-step-by-step-guide-of-the-construction-of-a-renaissance-rackett-manual">blueprints online</a> and was able to build a model from those in Blender. Made a few test fit prints, did a few more prints, and a dozen or so failed re... | [
"music",
"instrument",
"renaissance",
"doublereed",
"rackett"
] | Hobby & Makers > Music | [
"1014532/images/image_1_compressed.jpg",
"1014532/images/image_2_compressed.jpg",
"1014532/images/image_3_compressed.jpg",
"1014532/images/image_4_compressed.jpg",
"1014532/images/image_5_compressed.jpg",
"1014532/images/image_6_compressed.jpg"
] | [
"1014532/stls/rackett_Bocal.stl",
"1014532/stls/rackett_Body.stl",
"1014532/stls/rackett_Bottom.stl",
"1014532/stls/rackett_Pirouette.stl",
"1014532/stls/rackett_reedGuide.stl",
"1014532/stls/rackett_Staple.stl",
"1014532/stls/rackett_staplePlug.stl",
"1014532/stls/rackett_Top.stl"
] | CC0 | https://www.printables.com/model/1014532 | data_0046.tar |
1188493 | Rackfinity v1 (Open source) | <p>First release of my modular rack system. Very plain at this current stage, only empty modules and bricks. <br><br><strong>You will need to understand basic CAD to get use out of the system at this stage. The included STEP file only includes blank modules.</strong><br><br><strong>If you just need a basic 5... | [] | Hobby & Makers > Other Ideas | [
"1188493/images/image_1_compressed.jpg"
] | [
"1188493/stls/1 wide 1 tall heat set.stl",
"1188493/stls/1 wide 3 tall heat set.stl",
"1188493/stls/1 wide 3 tall nut variety.stl",
"1188493/stls/2 wide 1 tall heat set.stl",
"1188493/stls/2 wide 1 tall nut variety.stl",
"1188493/stls/2 wide 3 tall nut variety.stl",
"1188493/stls/bottom.stl",
"1188493... | CC-BY | https://www.printables.com/model/1188493 | data_0046.tar |
1191480 | Rackfinity v1 (Open source) Top and Bottom split | <p>My tiny printer could not print the big top and bottom parts.</p><p>So I just split them. Reducing the storage space in the top, but sticking to the concept of stabilizing everything with continuous threaded rods.</p><p>The model can be printed with a Prusa Mini+ or BambuLab A1 Mini when rotated by 45°. Make sure th... | [] | Hobby & Makers > Other Ideas | [
"1191480/images/image_1_compressed.jpg",
"1191480/images/image_2_compressed.jpg",
"1191480/images/image_3_compressed.jpg"
] | [
"1191480/stls/Bottom_Left_v1.stl",
"1191480/stls/Bottom_Right_v1.stl",
"1191480/stls/TopBottom_Front_v1.stl",
"1191480/stls/TopBottom_Rear_v1.stl",
"1191480/stls/Top_Left_v1.stl",
"1191480/stls/Top_Right_v1.stl"
] | CC-BY | https://www.printables.com/model/1191480 | data_0046.tar |
399718 | Rackmount Cable Management Clip | <p>I've been wanting to add vertical cable clips to my rack, but most of the solutions I saw took up more than 1 screw, which made the printing complicated. I was able to bore out the mounting hole of this design to 6mm to fit most standard rack screws, and it works perfectly.</p>
Category: Computer | [
"thingiverse"
] | Gadgets > Computers | [
"399718/images/image_1_compressed.jpg"
] | [
"399718/stls/Rack_Cable_Clip.stl"
] | CC-BY | https://www.printables.com/model/399718 | data_0046.tar |
1232812 | Raddy Sprunki | [
"sprunki"
] | Gadgets > Video Games | [
"1232812/images/image_1_compressed.jpg",
"1232812/images/image_2_compressed.jpg",
"1232812/images/image_3_compressed.jpg",
"1232812/images/image_4_compressed.jpg",
"1232812/images/image_5_compressed.jpg"
] | [
"1232812/stls/Raddy.stl"
] | CC-BY | https://www.printables.com/model/1232812 | data_0046.tar | |
49738 | Radiator air purge tool square wrench key 5mm | <p>This is a tool to purge air from radiators. It fits on 5mm outside lenght square valve screws.</p>
<p>This Prints without support, if you rotate the large flat surface towards the build plate.</p>
<h3>Print instructions</h3><h3>Category: Tools Summary</h3>
<p>This is a tool to purge air from radiators. It fits on 5m... | [
"5mm",
"thingiverse",
"radiator",
"5mmsquarekey",
"airpurge"
] | Household > Other House Equipment | [
"49738/images/image_1_compressed.jpg",
"49738/images/image_2_compressed.jpg"
] | [
"49738/stls/radiator_air_purge_valve_key_v1.stl"
] | GPL2.0 | https://www.printables.com/model/49738 | data_0046.tar |
320607 | Radiator cap (TRV) - 30mm/1.5mm thread | <p>Just a simple radiator cap (TRV) - 30mm/1.5mm thread</p> | [
"cap",
"heating",
"radiator",
"trv"
] | Household > Other House Equipment | [
"320607/images/image_1_compressed.jpg"
] | [
"320607/stls/Radiator_cap.stl"
] | CC0 | https://www.printables.com/model/320607 | data_0046.tar |
1283497 | Radiomaster Pocket Gimbal Protector | <p>Remix of https://www.printables.com/model/569384-radiomaster-pocket-gimbal-protection - Designed from the ground up using dimensions taken from the STL in Orca Slicer. </p><p>Remix features larger Stick holes (10mm) for custom Sticks and a thicker retaining clip.</p> | [
"gimbal",
"radiocontrol",
"gimbalprotector",
"radiomaster",
"radiomasterpocket"
] | Hobby & Makers > RC & Robotics | [
"1283497/images/image_1_compressed.jpg",
"1283497/images/image_2_compressed.jpg"
] | [
"1283497/stls/RM Pocket Gimbal Protector.stl"
] | CC-BY | https://www.printables.com/model/1283497 | data_0046.tar |
61891 | Radiomaster TX16s Gimbal Covers | <p>Joined gimbal covers for the Radiomaster TX16s radio.</p><p>These are printed in PLA with a color stop part way.</p><p>Black Hatchbox PLA: https://amzn.to/3sOiSnG</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Prusa</p><p> </p><p><strong>Printer: </strong></p><p>I3 MK3S</p><p><strong>Rafts:</stro... | [
"gimbal",
"thingiverse",
"gimbalcover",
"gimbalprotector",
"radiomastertx16s",
"tx16s"
] | Hobby & Makers > RC & Robotics | [
"61891/images/image_1_compressed.jpg",
"61891/images/image_2_compressed.jpg",
"61891/images/image_3_compressed.jpg",
"61891/images/image_4_compressed.jpg",
"61891/images/image_5_compressed.jpg",
"61891/images/image_6_compressed.jpg"
] | [
"61891/stls/TX16S_Gimbal_Covers.stl",
"61891/stls/TX16S_Gimbal_Covers_Joiner.stl"
] | CC-BY | https://www.printables.com/model/61891 | data_0046.tar |
4046 | Radius finder Metric | <p>It is always difficult to measure a radius of a rounded corner. This way you can better guestimate it.</p>
<h3>Print instructions</h3><p>Print with text side down for better result.</p> | [
"finder",
"metric",
"radius"
] | Hobby & Makers > Tools | [
"4046/images/image_1_compressed.jpg",
"4046/images/image_2_compressed.jpg"
] | [
"4046/stls/radius-finder.stl"
] | CC0 | https://www.printables.com/model/4046 | data_0046.tar |
64999 | Radius Gauge for Calipers (Debossed Formula) | <p>Summary says it all! Just wanted to have the formula debossed in the part so I didn't have to look it up.</p><p>Files include the .STL, .3MF, as well as 2 different .gcodes: 1 with ironing for a smooth top layer, and one without.</p><p>For details about precision, make sure to refer to <a href="https://www.printable... | [
"radius",
"radiusgauge",
"calipers"
] | Hobby & Makers > Tools | [
"64999/images/image_1_compressed.jpg"
] | [
"64999/stls/Caliper_Radius_Gauge.stl"
] | GPL2.0 | https://www.printables.com/model/64999 | data_0046.tar |
281828 | RADXA Rock Pi S - Case | <p>The box for the single-board computer Rock Pi s. Box protects the SBC against damage and at the same time ensures good heat dissipation to prevent overheating. The box can be screwed together with an M3 screw.<strong> </strong><a href="https://www.printables.com/cs/model/281832-radxa-rock-pi-s-case-with-wifi-antenna... | [
"box",
"case",
"armor",
"computer",
"iot",
"sbc",
"singleboardcomputer",
"radxa",
"rockpis",
"rockpi"
] | Hobby & Makers > Electronics | [
"281828/images/image_1_compressed.jpg",
"281828/images/image_10_compressed.jpg",
"281828/images/image_11_compressed.jpg",
"281828/images/image_12_compressed.jpg",
"281828/images/image_13_compressed.jpg",
"281828/images/image_2_compressed.jpg",
"281828/images/image_3_compressed.jpg",
"281828/images/ima... | [
"281828/stls/Radxa_Rock_Pi_S_base.stl",
"281828/stls/Radxa_Rock_Pi_S_cover.stl"
] | CC-BY | https://www.printables.com/model/281828 | data_0046.tar |
482424 | Rail Grip, Rail Cover and Hand Stop | <p>Rail covers and a handstop. 20mm and 80mm spacing so will work with both M-Lokk and Keymod. Cover in 5.5 and 3.5 inch versions. Print with supports on buildplate only.</p> | [
"mlok",
"mlock",
"mlokhandguard",
"mlokrail"
] | Sports & Outdoor > Outdoor Sports | [
"482424/images/image_1_compressed.jpg",
"482424/images/image_10_compressed.jpg",
"482424/images/image_11_compressed.jpg",
"482424/images/image_12_compressed.jpg",
"482424/images/image_13_compressed.jpg",
"482424/images/image_2_compressed.jpg",
"482424/images/image_3_compressed.jpg",
"482424/images/ima... | [
"482424/stls/m-lock_cover_3.5in.stl",
"482424/stls/M-lok_grip_cover_5.5in.stl",
"482424/stls/M-lok_grip_cover_Handstop_Cutout.stl",
"482424/stls/M-lok_Handstop.stl"
] | CC-BY | https://www.printables.com/model/482424 | data_0046.tar |
160936 | RailCore® II 300 ZL/ZLT | <h3>RailCore® II 300 ZL/ZLT</h3><p>Railcore is a family of Core-XY based Reprap 3D printers designed by J. Steve White, Tony Akens, and Ben Withem.</p><h4>Build of Materials</h4><p>A <a href="https://docs.google.com/spreadsheets/d/1sxKl6h23SXfuNM7hNiX35rIrpISw8AruEEcNl2Fvibk/edit#gid=0">BOM </a>is provided with links t... | [
"corexy",
"railcore"
] | 3D Printers > Other Printer Parts & Upgrades | [
"160936/images/image_1_compressed.jpg"
] | [
"160936/stls/belt-retainer-clip.stl",
"160936/stls/bl-touch-mount.stl",
"160936/stls/bmg-mount.stl",
"160936/stls/cable-clip.stl",
"160936/stls/e3d-v6-groove-mount.stl",
"160936/stls/e3d-vocano-groove-mount.stl",
"160936/stls/fan-duct-adapter.stl",
"160936/stls/fan-duct-mount.stl",
"160936/stls/fan-... | CC-BY | https://www.printables.com/model/160936 | data_0046.tar |
446575 | Rain Stick | <p>Print the body in Vase Mode, The diverter with a standard infill, and the cap is optional. No supports required, they are all tall prints, but otherwise should be pretty easy ones. The quantity and size of the bits you fill it with affect the sound, I cut up the bits of filament left on the ends of spool... | [
"noisemaker"
] | Gadgets > Other Gadgets | [
"446575/images/image_1_compressed.jpg",
"446575/images/image_2_compressed.jpg",
"446575/images/image_3_compressed.jpg"
] | [
"446575/stls/Rain Stick Body.stl",
"446575/stls/Rain Stick Cap.stl",
"446575/stls/Rain Stick Diverter.stl"
] | CC-BY | https://www.printables.com/model/446575 | data_0046.tar |
201344 | Rainbow Box - SD Puzzle Box (42/95 Moves) | <p>This is a sequential discovery puzzle box with two internal compartments. The first and larger compartment requires 42 moves to reach, and the second, more hidden compartment requires an additional 53 moves.</p><p>This model has been refined from it's previous posting on <a href="https://www.thingiverse.com/thing:48... | [] | Toys & Games > Puzzles & Brain-teasers | [
"201344/images/image_1_compressed.jpg"
] | [
"201344/stls/1-Drawer.stl",
"201344/stls/10-Stopper.stl",
"201344/stls/11-Red.stl",
"201344/stls/12-End Cap.stl",
"201344/stls/13-Fishbone.stl",
"201344/stls/14.1-Yellow.stl",
"201344/stls/14.2-Green.stl",
"201344/stls/14.3-Blue.stl",
"201344/stls/14.4-Purple.stl",
"201344/stls/15-Key.stl",
"201... | CC-BY | https://www.printables.com/model/201344 | data_0046.tar |
408434 | Raincoat Cord Ends | <p>Ends for the cords on my grandaughter's raincoat</p> | [] | Fashion > Other Fashion Accessories | [
"408434/images/image_1_compressed.jpg",
"408434/images/image_2_compressed.jpg"
] | [
"408434/stls/Raincoat Cord Stop v1.stl"
] | CC0 | https://www.printables.com/model/408434 | data_0046.tar |
318937 | Rainworld Slugcat Keychain | <p>Simply print the model and add a small string through the grapple worm with a knot to make your own keychain! Rainworld has really lacked merch despite being one of the best games ever made, hopefully this helps to rectify a little bit of that! </p> | [
"keychain",
"rainworld",
"slugcat"
] | Toys & Games > Action Figures & Statues | [
"318937/images/image_1_compressed.jpg"
] | [
"318937/stls/SlugcatKeychain.stl"
] | CC-BY | https://www.printables.com/model/318937 | data_0046.tar |
1018787 | Raised Buttons for Ploopy Adept | <p>My tiny hands struggle to reach the furthest 3 buttons from my natural resting position on the ploopy.</p><p>To solve this I created 3 raised buttons that are 3d-printable to be glued on top of the original ploopy case to raise the buttons into reach.<br><br>The second image is printed with fuzzy skin.</p><h4>Variat... | [
"ploopy",
"ploopyadept"
] | Gadgets > Computers | [
"1018787/images/image_1_compressed.jpg",
"1018787/images/image_2_compressed.jpg",
"1018787/images/image_3_compressed.jpg"
] | [
"1018787/stls/ploopy_adept_raised_4_buttons_left_NO_LIP.stl",
"1018787/stls/ploopy_adept_raised_4_buttons_left_WITH_LIP.stl",
"1018787/stls/ploopy_adept_raised_4_buttons_right_NO_LIP.stl",
"1018787/stls/ploopy_adept_raised_4_buttons_right_WITH_LIP.stl",
"1018787/stls/ploopy_adept_raised_buttons_left_NO_LIP.... | CC-BY | https://www.printables.com/model/1018787 | data_0046.tar |
564514 | Rake Rack Cable and Cord Holder | <p>My cable holder/organizer that helps keeping them from getting tangled and ready to use.</p><p>Wall or cabinet mountable with screws or double sided adhesive trim tape.</p><p> </p> | [] | Art & Design > Wall-mounted | [
"564514/images/image_1_compressed.jpg",
"564514/images/image_2_compressed.jpg",
"564514/images/image_3_compressed.jpg",
"564514/images/image_4_compressed.jpg",
"564514/images/image_5_compressed.jpg",
"564514/images/image_6_compressed.jpg",
"564514/images/image_7_compressed.jpg",
"564514/images/image_8... | [
"564514/stls/TOMS CABLE 11 HOLDER v3.stl"
] | GPL3.0 | https://www.printables.com/model/564514 | data_0046.tar |
214264 | Rammstein podtácek | [
"podtacek",
"pivo",
"rammstein"
] | Household > Kitchen | [
"214264/images/image_1_compressed.jpg",
"214264/images/image_2_compressed.jpg",
"214264/images/image_3_compressed.jpg"
] | [
"214264/stls/rammstein.stl"
] | CC0 | https://www.printables.com/model/214264 | data_0046.tar | |
326005 | Rampička pro hru Kloboučku hop | Upravená rampička pro hro Kloboučku hop. Původní měla můstek tvořený jen z perimetrů, což mělo za příčinu její lámání. | Download free 3D printable STL models | [
"stolnihra",
"klobouckuhop",
"rampicka"
] | Toys & Games > Board Games | [
"326005/images/image_1_compressed.jpg",
"326005/images/image_2_compressed.jpg"
] | [
"326005/stls/hop_rampicka.stl"
] | CC0 | https://www.printables.com/model/326005 | data_0046.tar |
271864 | Ramses II (Der Zerstreute Pharao) pyramid | <p>Do you need a spare pyramid for board game Ramses II?<br>You come to the right place.<br>It fits nicely and even can be stuck on top of original pyramids.</p><p> </p> | [
"board",
"boardgame",
"sparepart",
"pyramid"
] | Toys & Games > Board Games | [
"271864/images/image_1_compressed.jpg"
] | [
"271864/stls/Ramses II pyramida v1.stl"
] | CC0 | https://www.printables.com/model/271864 | data_0046.tar |
14769 | Ranged Bandit | <p>Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a href="https://www.patreon.com/mz4250">https://www.patreon.com/mz4250</a></p>
<p>Patrons have access to all my files in one place, a reque... | [
"bandit",
"thingiverse",
"thug"
] | Tabletop Miniatures > Characters & Monsters | [
"14769/images/image_1_compressed.jpg",
"14769/images/image_2_compressed.jpg"
] | [
"14769/stls/bandit_ranged_with_crossbow.stl"
] | CC-BY | https://www.printables.com/model/14769 | data_0046.tar |
298802 | Ranger's Apprentice Oakleaf Medallion Necklace | <p>This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices.</p><p>This is a simple fast print without supports but use 0.1 mm detail. Used leather to ... | [
"necklace",
"medallion",
"oakleaf"
] | Costumes & Accessories > Cosplay & Costumes in general | [
"298802/images/image_1_compressed.jpg",
"298802/images/image_2_compressed.jpg",
"298802/images/image_3_compressed.jpg",
"298802/images/image_4_compressed.jpg",
"298802/images/image_5_compressed.jpg"
] | [
"298802/stls/Oak Medallion.stl"
] | CC-BY | https://www.printables.com/model/298802 | data_0046.tar |
308730 | Raspberry Pi 1B Case - no screws |
<p>Remixed from 0110-M-P's excellent original design. I was going for style more than functionality, and removed the addtional port openings and screw holes. It's designed to snap together, but probably isn't sturdy enough to just toss in a bag and still stay connected.</p>
<p>Second photo shows a comparison between... | [
"raspberrypicase",
"thingiverse",
"raspberrypib"
] | Hobby & Makers > Electronics | [
"308730/images/image_1_compressed.jpg",
"308730/images/image_2_compressed.jpg",
"308730/images/image_3_compressed.jpg",
"308730/images/image_4_compressed.jpg"
] | [
"308730/stls/Raspi_1_Bottom.stl",
"308730/stls/RasPi_1_Top.stl"
] | CC-BY | https://www.printables.com/model/308730 | data_0046.tar |
43347 | Raspberry Pi 3A+ case (click in 3030 rail) | <p>I remixed some parts from thingi to create a case to put in the alu rail.I created it a while ago but while looking for a pi case for my new mini I found that it works too on my</p>
<p>No tools needed. Pics shows attached to mk3</p>
<p>Original case: <a href="https://www.thingiverse.com/thing:3939613">https://www.th... | [
"mini",
"3030",
"mk3s",
"raspberry"
] | 3D Printers > Other Printer Parts & Upgrades | [
"43347/images/image_1_compressed.jpg",
"43347/images/image_2_compressed.jpg"
] | [
"43347/stls/pi3acase.stl",
"43347/stls/pi3alid.stl"
] | CC-BY | https://www.printables.com/model/43347 | data_0046.tar |
6041 | Raspberry Pi 4 Case 3030 hanging mount for Prusa MK4/MK4S/MK3/MK3s v-slot with 40mm Noctua fan | <p>Inspired by <a href="https://www.thingiverse.com/thing:2843889">https://www.thingiverse.com/thing:2843889</a><br>I used the one linked above for the Pi3, but needed an upgrade for Pi4 and decided to use a noctua 40x10 fan, as the new raspberry runs a little hotter.<br>This can be mounted on any side of the MK4/MK4S/... | [
"case",
"raspberry",
"housing",
"noctua",
"pi4"
] | 3D Printers > Accessories | [
"6041/images/image_1_compressed.jpg",
"6041/images/image_2_compressed.jpg",
"6041/images/image_3_compressed.jpg",
"6041/images/image_4_compressed.jpg",
"6041/images/image_5_compressed.jpg",
"6041/images/image_6_compressed.jpg",
"6041/images/image_7_compressed.jpg",
"6041/images/image_8_compressed.jpg"... | [
"6041/stls/bottom.stl",
"6041/stls/top.stl"
] | CC-BY | https://www.printables.com/model/6041 | data_0046.tar |
34223 | Raspberry Pi 4 DIN Rail Mount | <p>Mounting Plate for a Raspberry Pi 4 to be mounted on a DIN Rail. For the original Fusion 360 model, see <a href="https://github.com/uwearzt/fusion360/blob/master/parts/Lab/RaspberryPi/DINRailMount.f3d">https://github.com/uwearzt/fusion360/blob/master/parts/Lab/RaspberryPi/DINRailMount.f3d</a> or download the Step fi... | [] | Hobby & Makers > Mechanical Parts | [
"34223/images/image_1_compressed.jpg",
"34223/images/image_2_compressed.jpg"
] | [
"34223/stls/dinrailmount.stl"
] | BSD | https://www.printables.com/model/34223 | data_0046.tar |
63865 | Raspberry Pi 7 inch touchscreen case for mk3 | <p>the mount for the frame should be in petg the rest is pla</p><p>you need :</p><p>4x m3x10mm</p><p>2x m3x14mm</p><p>Material:PLA,PETG</p><p>Printer Prusa Mk3S+</p><p> </p> | [] | 3D Printers > Accessories | [
"63865/images/image_1_compressed.jpg",
"63865/images/image_2_compressed.jpg",
"63865/images/image_3_compressed.jpg",
"63865/images/image_4_compressed.jpg",
"63865/images/image_5_compressed.jpg",
"63865/images/image_6_compressed.jpg",
"63865/images/image_7_compressed.jpg",
"63865/images/image_8_compres... | [
"63865/stls/display front.stl",
"63865/stls/display middle.stl",
"63865/stls/display mount.stl",
"63865/stls/display rear.stl"
] | CC0 | https://www.printables.com/model/63865 | data_0046.tar |
181821 | Raspberry Pi camera Rev 1.3 Case & Mount |
<p>little case & mount for the Raspberry Pi camera rev 1.3</p>
<p>you need some M3x15 screws and M3 nuts for the joint</p>
<p>and 2 M3 screws for the base (plus hammernuts to fit in 2020 extrusion)</p>
<p>fits for me inside the Anycubic 4MAX</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>A... | [
"thingiverse",
"raspberrypicamera"
] | 3D Printers > Accessories | [
"181821/images/image_1_compressed.jpg",
"181821/images/image_2_compressed.jpg",
"181821/images/image_3_compressed.jpg",
"181821/images/image_4_compressed.jpg",
"181821/images/image_5_compressed.jpg",
"181821/images/image_6_compressed.jpg",
"181821/images/image_7_compressed.jpg"
] | [
"181821/stls/Back.stl",
"181821/stls/base.stl",
"181821/stls/Case.stl",
"181821/stls/spacer.stl"
] | CC-BY | https://www.printables.com/model/181821 | data_0046.tar |
189275 | Raspberry Pi Case for Waveshare 4.3 inch DSI LCD module | <p>This is a case I designed for Raspberry Pi with <a href="https://www.waveshare.com/wiki/4.3inch_DSI_LCD">Waveshare 4.3 inch LCD module</a> which makes a nice setup for running OctoPrint, Klipper/etc. You will need some M3 socket head screws and nuts (DIN912) for securing the lid to the case (6x 6mm long) as well as ... | [
"raspberrypicase",
"thingiverse"
] | Gadgets > Computers | [
"189275/images/image_1_compressed.jpg",
"189275/images/image_2_compressed.jpg",
"189275/images/image_3_compressed.jpg",
"189275/images/image_4_compressed.jpg",
"189275/images/image_5_compressed.jpg"
] | [
"189275/stls/waveshare_4.3-dsi-lcd_case.stl",
"189275/stls/waveshare_4.3-dsi-lcd_case_lid.stl",
"189275/stls/waveshare_4.3-dsi-lcd_case_mount_2020_extrusion.stl",
"189275/stls/waveshare_4.3-dsi-lcd_case_mount_screen.stl"
] | CC-BY | https://www.printables.com/model/189275 | data_0046.tar |
114470 | Raspberry Pi Compute Module 4 Case for WaveShare CM4 IO board | <p>This is a redesigned case based on Malolo's RPi4 Case. This was designed to fit the WaveShare CM4 IO board with PI 4 Compute Module. The case has a 40mm fan design to blow air across the top then around the side and to the bottom to cool the NVMe installed on the bottom or the board. All other vent... | [
"raspberrypicase",
"waveshare",
"raspberrypicomputemodule4"
] | Gadgets > Computers | [
"114470/images/image_1_compressed.jpg",
"114470/images/image_2_compressed.jpg",
"114470/images/image_3_compressed.jpg",
"114470/images/image_4_compressed.jpg",
"114470/images/image_5_compressed.jpg"
] | [
"114470/stls/CM4-Pi-Case-Base.stl",
"114470/stls/CM4-Pi-Case-FanHolder.stl",
"114470/stls/CM4-Pi-Case-Top-NoFan.stl",
"114470/stls/CM4-Pi-Case-Top.stl",
"114470/stls/CM4-Pi-Case.stl"
] | CC0 | https://www.printables.com/model/114470 | data_0046.tar |
315490 | Raspberry Pi Flirc case wall mount | <p>This is a quick remix of <a href="https://www.printables.com/de/model/133222-sky-watcher-canakit-raspberry-pi-mount">Josue's Flirc mount</a>. I added 4 screw holders and removed the inner block to have my Pi fit into the case. </p><p>I did have some print artefacts at the height of the screw mounts, yet my Pi f... | [
"wallmount",
"raspberrypicase",
"flirc",
"raspberrypihousing",
"raspberrypi4bcase",
"flirccase"
] | 3D Printers > Other Printer Parts & Upgrades | [
"315490/images/image_1_compressed.jpg",
"315490/images/image_2_compressed.jpg"
] | [
"315490/stls/Flirc Wall Mount.stl"
] | CC0 | https://www.printables.com/model/315490 | data_0046.tar |
539515 | Raspberry Pi GPIO Cover 40 Pin | <p>I made gpio cover with perfect fit because I dont like others that I found.<br>Test it!</p><p>You can use it with another Raspberry Pi, my Raspberry is Pi zero 2wh.</p> | [
"pin",
"cover",
"raspberry",
"pi",
"gpio",
"gpiocover"
] | 3D Printers > Other Printer Parts & Upgrades | [
"539515/images/image_1_compressed.jpg",
"539515/images/image_2_compressed.jpg"
] | [
"539515/stls/gpio connector cover.stl"
] | CC0 | https://www.printables.com/model/539515 | data_0046.tar |
217523 | Raspberry Pi Pico Picoprobe housing | <p>Raspberry Pi Pico is dirt cheap and can become a very useful SWD probe. Developing using SWD is way better than using the button and disconnecting the USB cable every time you want to try some new software.</p><p>This basic housing has space to run wires from the probe Pico to the target board. It snaps together wit... | [
"raspberrypi",
"development",
"embeddedelectronics",
"raspberrypipico"
] | Hobby & Makers > Electronics | [
"217523/images/image_1_compressed.jpg",
"217523/images/image_2_compressed.jpg"
] | [
"217523/stls/PicoProbe Base.stl",
"217523/stls/PicoProbe Button.stl",
"217523/stls/PicoProbe Lid.stl"
] | CC0 | https://www.printables.com/model/217523 | data_0046.tar |
206751 | Raspberry Pi Ribbon Cable Replacement Clip | <p>I designed this clip as a replacement one for the Raspberry Pi. It should work on all models except for the Raspberry Pi Zero W.</p><p>There are two variants for the clip, one with a thickness of 0.6mm and one with a 0.8mm thickness. Both should work fine, but if the 0.8mm one offers a little more clamping force.</p... | [
"replacement",
"raspberrypi",
"ribbon",
"thingiverse",
"ribboncable",
"replacementpart",
"ribboncableclip",
"replacementclip"
] | Hobby & Makers > Other Ideas | [
"206751/images/image_1_compressed.jpg",
"206751/images/image_2_compressed.jpg",
"206751/images/image_3_compressed.jpg"
] | [
"206751/stls/Clip_0.6mm.stl",
"206751/stls/Clip_0.8mm.stl"
] | CC-BY | https://www.printables.com/model/206751 | data_0046.tar |
1377047 | Raspberry Pi Touch Display 2 Case | <p>Case for Raspberry Pi Touch Display 2 with housings for the Raspberry Pi 3 (B/B+), 4 and 5. </p><h3>Updates</h3><ul><li>2025-08-11: Various models revised, the thread for the screw connection between the display case and the stands is M2.5 and not M3.</li></ul><h3><strong>Features</strong></h3><ul><li>Internal ... | [
"case",
"mountingplate",
"fan",
"raspberry",
"raspberrypi",
"raspberrypicase",
"raspberrypi4",
"touchscreen",
"2020vslotextrusion",
"raspberrypi3",
"mountingbracket",
"coolingfan",
"raspberrypi3case",
"vslot",
"raspberrypi4case",
"40mmfan",
"threadedinsert",
"raspberrypitouchscreen... | Hobby & Makers > Electronics | [
"1377047/images/image_1_compressed.jpg",
"1377047/images/image_10_compressed.jpg",
"1377047/images/image_11_compressed.jpg",
"1377047/images/image_2_compressed.jpg",
"1377047/images/image_3_compressed.jpg",
"1377047/images/image_4_compressed.jpg",
"1377047/images/image_5_compressed.jpg",
"1377047/imag... | [
"1377047/stls/rpi-bracket-plate-long.stl",
"1377047/stls/rpi-bracket-plate.stl",
"1377047/stls/rpi-bracket-vslot.stl",
"1377047/stls/rpi-bracket.stl",
"1377047/stls/rpi-fanmount.stl",
"1377047/stls/rpi-locking-washer.stl",
"1377047/stls/rpi-stand.stl",
"1377047/stls/rpi-touch-display2-case.stl",
"13... | CC-BY | https://www.printables.com/model/1377047 | data_0046.tar |
1064646 | Raspberry Pi Touch Display 2 simple frame and stand | <p>New official screen from Raspberry Pi has a different mounting screws distance. Let's put it in the simple frame (-:</p><p>It keeps rpi exposed, so it is not a full case, rather a universal stand / protector for this thin screen.</p><p>The frame has a very slight “click-on”, so you don't need to screw it in, but why... | [
"stand",
"raspberrypi",
"raspberrypicase"
] | Hobby & Makers > Electronics | [
"1064646/images/image_1_compressed.jpg",
"1064646/images/image_10_compressed.jpg",
"1064646/images/image_11_compressed.jpg",
"1064646/images/image_2_compressed.jpg",
"1064646/images/image_3_compressed.jpg",
"1064646/images/image_4_compressed.jpg",
"1064646/images/image_5_compressed.jpg",
"1064646/imag... | [
"1064646/stls/pits2_frame.stl",
"1064646/stls/pits2_leg_landscape.stl",
"1064646/stls/pits2_leg_portrait.stl"
] | CC-BY | https://www.printables.com/model/1064646 | data_0046.tar |
10520 | Raspberry pi with 5 "touch screen | <p>This is a case for the rsapberry pi with a 5 "display.</p>
<p>The sd card is accessible via the lid on the back.</p>
<p>For the pin there is also a place on the back.</p>
<p>Designed and drawn by Wolfgang Karner</p>
<h3>Print instructions</h3><h3>Category: Computer Print Settings</h3>
<p><strong>Printer:</strong> Ko... | [
"thingiverse"
] | Hobby & Makers > Electronics | [
"10520/images/image_1_compressed.jpg",
"10520/images/image_10_compressed.jpg",
"10520/images/image_11_compressed.jpg",
"10520/images/image_12_compressed.jpg",
"10520/images/image_13_compressed.jpg",
"10520/images/image_14_compressed.jpg",
"10520/images/image_15_compressed.jpg",
"10520/images/image_16_... | [
"10520/stls/hdmi_abdeckung.stl",
"10520/stls/hdmi_abdeckung_ml.stl",
"10520/stls/raspi_oberteil_dh.stl",
"10520/stls/raspi_oberteil_oo.stl",
"10520/stls/raspi_sd_card_deckel.stl",
"10520/stls/raspi_untererteil_dh.stl",
"10520/stls/raspi_untererteil_oo.stl"
] | CC-BY | https://www.printables.com/model/10520 | data_0046.tar |
85088 | Raspberry Pi Zero 2 frame for Einsy Rambo | <p>For Raspberry Pi Zero 2 W so you can use Octoprint with your MK3/MK3S/MK3S+ printer.<br>For printing, assembly, installation and configuration
follow the instructions:<br><a href="https://help.prusa3d.com/en/article/raspberry-pi-zero-w-preparation-and-installation_2180">https://help.prusa3d.com/en/article/raspberry-... | [
"octoprint",
"raspberrypi",
"raspberrypizero",
"raspberrypizero2w"
] | 3D Printers > Other Printer Parts & Upgrades | [
"85088/images/image_1_compressed.jpg",
"85088/images/image_2_compressed.jpg",
"85088/images/image_3_compressed.jpg"
] | [
"85088/stls/rpi-zero2-frame.stl"
] | GPL3.0 | https://www.printables.com/model/85088 | data_0046.tar |
1286904 | Raspberry PI Zero 2W case with magnets | <p>Here is a remix of a wonderful RaspberryPi Zero 2W case.<br>I added two spots to add two 6x3mm magnets. </p><p>It can now be placed on any magnetic surface. </p><p>Mine sits on my Elegoo Centauri Carbon to host OctoEverywhere.</p> | [
"case",
"magnet",
"magnets",
"raspberrypicase",
"raspberrypizero",
"raspberrypihousing",
"rasperrypi",
"raspberrypizero2w",
"encloser",
"zero2w"
] | Hobby & Makers > Electronics | [
"1286904/images/image_1_compressed.jpg",
"1286904/images/image_2_compressed.jpg",
"1286904/images/image_3_compressed.jpg",
"1286904/images/image_4_compressed.jpg",
"1286904/images/image_5_compressed.jpg",
"1286904/images/image_6_compressed.jpg"
] | [
"1286904/stls/bottom_with_magnets.stl",
"1286904/stls/top.stl"
] | CC-BY | https://www.printables.com/model/1286904 | data_0046.tar |
97288 | Raspberry Pi Zero 40-pin frame | <p>This is the remix of the einsy board for for the raspberry zero, pin hole extended to the full 40 pins, so it can be used as an extra reinforcement to hold the pins when attaching modules on it. <br><br>As with the original frame, it's ideal to use 18mm pins for this frame to ensure everything is attached prope... | [
"frame",
"raspberry",
"pi",
"zero"
] | Hobby & Makers > Electronics | [
"97288/images/image_1_compressed.jpg"
] | [
"97288/stls/rpicase_pin v5.stl"
] | CC0 | https://www.printables.com/model/97288 | data_0046.tar |
270826 | Raspberry Pi Zero case |
<p>A nice looking easy to wall mountable Raspberry Pi zero case, which can be used if you have the headers soldered or without the headers. Notice that in whit this case the headers and the camera connector can't be used. The case screws together using 4 M2.5 bolts.</p>
<h3>Print Settings</h3>
<p><strong>Printer Bra... | [
"case",
"3dprinting",
"wallmount",
"electronics",
"raspberry",
"raspberrypi",
"raspberrypicase",
"raspberrypizero",
"thingiverse",
"electronicsenclosure"
] | Hobby & Makers > Electronics | [
"270826/images/image_1_compressed.jpg",
"270826/images/image_2_compressed.jpg",
"270826/images/image_3_compressed.jpg",
"270826/images/image_4_compressed.jpg"
] | [
"270826/stls/RPI_case_bot.stl",
"270826/stls/RPI_case_top.stl"
] | CC-BY | https://www.printables.com/model/270826 | data_0046.tar |
118355 | Raspberry Pi Zero Slim Case with screws | <p>A slim case for the Raspbery Pi Zero (w) with mounting tabs and holes for M2.5 x 12mm bolts and nuts. </p><p> </p><p>There is on bridge layer in the design in order to make printing easier. Use the M2.5 bolt to remove it or a 2.5 mm drill. </p> | [
"raspberrypicase",
"raspberrypizero"
] | Hobby & Makers > Electronics | [
"118355/images/image_1_compressed.jpg",
"118355/images/image_2_compressed.jpg",
"118355/images/image_3_compressed.jpg",
"118355/images/image_4_compressed.jpg",
"118355/images/image_5_compressed.jpg",
"118355/images/image_6_compressed.jpg"
] | [
"118355/stls/case-slim-v2.1.stl",
"118355/stls/lid-for-header-v2.1.stl"
] | CC-BY | https://www.printables.com/model/118355 | data_0046.tar |
384185 | Raspberry Pi Zero W 1.1 - Snap-fit case | <p>A snap-fit case for Raspberry Pi Zero W (V1.1) with cutouts for headers and heatsink. A version without cutouts coming soon.</p><p>The processor/heatsink placement varies on different models of Zero, make sure yours is V1.1. On V1.1 it is close to the HDMI port.</p> | [
"raspberry",
"raspberrypi",
"raspberrypicase",
"raspberrypizerow",
"rpizerow",
"rpizerowcase",
"pizerow"
] | Gadgets > Computers | [
"384185/images/image_1_compressed.jpg",
"384185/images/image_2_compressed.jpg"
] | [
"384185/stls/Case_RPZ1W_Bottom_v4.stl",
"384185/stls/Case_RPZ1W_Top_v4.stl"
] | CC-BY | https://www.printables.com/model/384185 | data_0046.tar |
581097 | Raspberry Pi Zero W Case | <p>A small case for raspberry pi zero (w, 2) with space to solder a USB A :)</p><p>The tolerances are a little tight, you may have to change the file a little to make it work with your printer.</p> | [] | Hobby & Makers > Electronics | [
"581097/images/image_1_compressed.jpg",
"581097/images/image_2_compressed.jpg"
] | [
"581097/stls/pi base usb.stl",
"581097/stls/pi base.stl",
"581097/stls/pi tampa v2.stl",
"581097/stls/pi tampa.stl"
] | CC0 | https://www.printables.com/model/581097 | data_0046.tar |
31482 | Raspberry Pi3A+ mount for Prusa MK3/MK3S | <p>Install a Raspberry Pi3A+ instead of an underpowered ZeroW! No soldering required! <a href="https://drive.google.com/open?id=1uh4MUrHPMmt2oGNcRB3LEzyNgbPnzjLR">PrusaPrint download for Pi3 included!</a></p>
<h3>Print instructions</h3><p><p>This Raspberry Pi3A+ mount consists of a bracket, a tweaked Einsy base enclo... | [
"mk3",
"mk3s",
"prusaprint",
"octoprint",
"octopi",
"raspberrypi",
"einsycase",
"raspberrypi3",
"raspberrypi3a"
] | 3D Printers > Prusa Parts & Upgrades | [
"31482/images/image_1_compressed.jpg",
"31482/images/image_2_compressed.jpg",
"31482/images/image_3_compressed.jpg",
"31482/images/image_4_compressed.jpg",
"31482/images/image_5_compressed.jpg",
"31482/images/image_6_compressed.jpg"
] | [
"31482/stls/pi3a-base.stl",
"31482/stls/pi3a-bracket.stl",
"31482/stls/pi3a-cover.stl"
] | GPL3.0 | https://www.printables.com/model/31482 | data_0046.tar |
1339975 | Rasta Duck | <p>Rasta Duck</p> | [] | Art & Design > Sculptures | [
"1339975/images/image_1_compressed.jpg",
"1339975/images/image_2_compressed.jpg"
] | [
"1339975/stls/rastakachna.stl"
] | CC-BY | https://www.printables.com/model/1339975 | data_0046.tar |
93164 | Ratcheting Belt Hanger Small | <p>Looking to hang up my slide belts, the print here was too big for my Prusa Mini so I chopped 50mm of each side and rotated it 45 degrees to make it fit. Printed excellent and works great.<br> </p> | [
"organiser",
"hanger",
"belt",
"closet"
] | Household > Bedroom | [
"93164/images/image_1_compressed.jpg",
"93164/images/image_2_compressed.jpg"
] | [
"93164/stls/belt-hanger_2belt-v1.stl"
] | CC-BY | https://www.printables.com/model/93164 | data_0046.tar |
927721 | RatRig BTT SFS 2.0 Mount | <p>This is a mount for the BigTreeTech SFS 2.0 sensor for RatRig printers. It was specifically made for the VCore 4. It uses 2 M6 x 12 screws and 2 drop in t-nuts to attach to one of the frame rails of the printer. It has enough clearance for the belts of the printer to pass behind it.</p> | [
"btt",
"ratrig",
"bttfilamentsensor",
"bttsmartfilament",
"sfsv2",
"ratrigvcore4",
"vcore4"
] | 3D Printers > Other Printer Parts & Upgrades | [
"927721/images/image_1_compressed.jpg",
"927721/images/image_2_compressed.jpg"
] | [
"927721/stls/Jessica's BTT SFS 2.0 Mount.stl"
] | CC0 | https://www.printables.com/model/927721 | data_0046.tar |
302208 | RatRig V-Core 3.1 Euclid Mount | <p>I modified the lead_screw_constraint_front_left_3.1 and included the Euclid probe to use the probe with the Enclosure 2.0. </p><p>The print orientation can be seen in the photo, no support is needed</p> | [
"ratrig",
"vcore3",
"euclid",
"vcore31"
] | 3D Printers > Other Printer Parts & Upgrades | [
"302208/images/image_1_compressed.jpg",
"302208/images/image_2_compressed.jpg",
"302208/images/image_3_compressed.jpg"
] | [
"302208/stls/Euclid_Mount_V-Core_3_1.stl"
] | GPL3.0 | https://www.printables.com/model/302208 | data_0046.tar |
1124277 | RatRig V-Core 4 PTFE Guide Upper DUALACTION (3030extrusion) | <p>Hey, </p><p>i designed a Double ECAS filament goude connector to handle mor flexibility with filament Dryboxes or shorter PTFE tube usage :) <br> </p><p>I added a 6 to 4mm V2 with improved filament path… 2-3mm logner so it will be not stuck anymore at this point :) <br>(thread6-thread4 V2)</p> | [
"filamentguide",
"3030extrusion",
"ratrigvcore",
"ratrig",
"ratrigvcore4",
"vcore4",
"vc4",
"rrvc4"
] | 3D Printers > Accessories | [
"1124277/images/image_1_compressed.jpg",
"1124277/images/image_2_compressed.jpg"
] | [
"1124277/stls/ecas04-ecas04.stl",
"1124277/stls/lowerFILAMENTguide6mm.stl",
"1124277/stls/thead4-ecas4.stl",
"1124277/stls/thread4-thread4.stl",
"1124277/stls/thread6-thread4 V2.stl"
] | CC-BY | https://www.printables.com/model/1124277 | data_0046.tar |
135496 | RatRig V-Minion Triple 40mm Front | <p>Place the front on the bed.</p><p>Front V2 - triple 40mm fan with honeycomb</p><p>Front V2_1 - triple 40mm fan with no grid</p><p>Front V2_1 Extended - triple 40mm fan with no grid and about 25mm longer to fit Octopus Board and 40x20mm fan</p><p> </p><p>Backplate V1 - with honeycomb grid and M3 Hexnut ins... | [
"case",
"40mmfan",
"minion",
"ratrig",
"vminion"
] | 3D Printers > Other Printer Parts & Upgrades | [
"135496/images/image_1_compressed.jpg",
"135496/images/image_2_compressed.jpg"
] | [
"135496/stls/Backplatte Triple 40 V1.stl",
"135496/stls/Backplatte Triple 40 V2.stl",
"135496/stls/Front V2.stl",
"135496/stls/Front V2_1 Extended.stl",
"135496/stls/Front V2_1.stl"
] | CC-BY | https://www.printables.com/model/135496 | data_0046.tar |
485146 | Razer headphone holder | Wide headphone holder, protects the cushioning, with RAZER label
Use 2 pcs conic furniture screws for fixing | Download free 3D printable STL models | [
"headphones",
"hold",
"holders",
"razer",
"headphoneshook"
] | Hobby & Makers > Music | [
"485146/images/image_1_compressed.jpg",
"485146/images/image_2_compressed.jpg",
"485146/images/image_3_compressed.jpg",
"485146/images/image_4_compressed.jpg",
"485146/images/image_5_compressed.jpg"
] | [
"485146/stls/Body.stl",
"485146/stls/Letters.stl"
] | CC-BY | https://www.printables.com/model/485146 | data_0046.tar |
1048449 | Razer Viper v2 Pro (zeromouse) | [
"mouse",
"gaming",
"v2",
"pro",
"zero",
"shell",
"viper",
"tech",
"razer",
"optimum",
"optimumtech",
"zeromouse"
] | Gadgets > Video Games | [
"1048449/images/image_1_compressed.jpg"
] | [
"1048449/stls/Razer Viper V2 Pro Shell.stl"
] | CC0 | https://www.printables.com/model/1048449 | data_0046.tar | |
10459 | Razor | <p>I thought these would be a neat design so i made a couple of razors. I will probably scale them down to use in my razor scraper for my printer, but i left these large to tape them to my workbench</p>
<h3>Print instructions</h3><p>Category: Art</p> | [
"razor",
"thingiverse",
"razorblade"
] | Costumes & Accessories > Props | [
"10459/images/image_1_compressed.jpg",
"10459/images/image_2_compressed.jpg",
"10459/images/image_3_compressed.jpg",
"10459/images/image_4_compressed.jpg"
] | [
"10459/stls/razor.stl",
"10459/stls/razor_blade.stl"
] | CC-BY | https://www.printables.com/model/10459 | data_0046.tar |
25361 | RC Airplane Wheel and Tire | <p>54 mm diameter tire and only 8 grams when fully assembled. This is designed primarily for RC planes but can be used with anything. The tire is TPU printed with 0.8mm walls and 0 (zero) infill so that it is hollow and rubbery. The wheel is printed with 1.2mm walls and 20% infill. I am very pleased. They should scale ... | [
"thingiverse"
] | Hobby & Makers > RC & Robotics | [
"25361/images/image_1_compressed.jpg",
"25361/images/image_2_compressed.jpg",
"25361/images/image_3_compressed.jpg",
"25361/images/image_4_compressed.jpg",
"25361/images/image_5_compressed.jpg"
] | [
"25361/stls/tire-54mm.stl",
"25361/stls/wheel-54mm.stl"
] | CC-BY | https://www.printables.com/model/25361 | data_0046.tar |
836741 | RC Model Repair Tool Organizer（RC模型维修工具收纳架） | <p>使用透明耗材外观效果更好<br>Better appearance with transparent supplies</p><figure class="image"><img src="https://media.printables.com/media/prints/836741/rich_content/6ed11e63-4f4e-449f-b4b0-ed183a66e661/xnip2024-04-08_20-48-51.jpg#%7B%22uuid%22%3A%22772ae1dd-e77b-43e1-99bd-9b1af23861f1%22%2C%22w%22%3A1772%2C%22h%22%3A1362%7D... | [
"organizer",
"tool",
"rc",
"repair"
] | Hobby & Makers > Tools | [
"836741/images/image_1_compressed.jpg",
"836741/images/image_2_compressed.jpg",
"836741/images/image_3_compressed.jpg"
] | [
"836741/stls/RC工具收纳架.stl"
] | CC-BY | https://www.printables.com/model/836741 | data_0046.tar |
50739 | RC Shock shaft pliers | <p>I discovered the RC Shock shaft pliers, designed by Luisom77 and printed it out.<br/>
( <a href="https://www.thingiverse.com/thing:4418072">https://www.thingiverse.com/thing:4418072</a> )</p>
<p>I did so in PETG and regular infill. The pliers functioned OK, untill I needed them for something witch required more for... | [
"rc",
"pliers",
"thingiverse",
"shocks"
] | Hobby & Makers > RC & Robotics | [
"50739/images/image_1_compressed.jpg",
"50739/images/image_2_compressed.jpg",
"50739/images/image_3_compressed.jpg",
"50739/images/image_4_compressed.jpg",
"50739/images/image_5_compressed.jpg",
"50739/images/image_6_compressed.jpg",
"50739/images/image_7_compressed.jpg",
"50739/images/image_8_compres... | [
"50739/stls/pliers_l_01.stl",
"50739/stls/pliers_r_01.stl"
] | CC-BY | https://www.printables.com/model/50739 | data_0046.tar |
197367 | RC Steering Servo Shims |
<p>These shims fit the ANNIMOS 20KG RC Servo (Amazon https://www.amazon.com/gp/product/B0769DFJVK). I found that the stock fit on the 3DSets Buggy (<a href="https://www.3dsets.com/product/model-7-buggy/">https://www.3dsets.com/product/model-7-buggy/</a>) cause the steering to bind. These shims raise the servo for a ... | [
"thingiverse"
] | Hobby & Makers > RC & Robotics | [
"197367/images/image_1_compressed.jpg",
"197367/images/image_2_compressed.jpg",
"197367/images/image_3_compressed.jpg",
"197367/images/image_4_compressed.jpg",
"197367/images/image_5_compressed.jpg"
] | [
"197367/stls/1.5mm.stl",
"197367/stls/1mm.stl",
"197367/stls/2.5mm.stl",
"197367/stls/2mm.stl",
"197367/stls/3mm.stl"
] | CC-BY | https://www.printables.com/model/197367 | data_0046.tar |
941561 | Re-engeneered catbox for reliability and easier printing | <p> </p><h4><strong>V2 design: </strong></h4><h4><strong>-Changed the lid design to add it some weight. </strong></h4><h4><strong>-The base design MUST NOW BE INSERTED FROM THE TOP OF THE BOX. </strong></h4><h4><strong>-The wall mounter has built-in supports that prevent it from... | [] | Gadgets > Other Gadgets | [
"941561/images/image_1_compressed.jpg",
"941561/images/image_2_compressed.jpg",
"941561/images/image_3_compressed.jpg"
] | [
"941561/stls/BoxBase.stl",
"941561/stls/Boxv7.stl",
"941561/stls/Boxv9.stl",
"941561/stls/NeoBoxB.stl",
"941561/stls/NeoCover.stl",
"941561/stls/NeoCoverV3.stl",
"941561/stls/Peg.stl",
"941561/stls/PegB.stl",
"941561/stls/PegBase.stl",
"941561/stls/PegSwivel.stl",
"941561/stls/SwivelA.stl",
"9... | CC0 | https://www.printables.com/model/941561 | data_0046.tar |
1191528 | Realistic HORSESHOE (modeled after a real one) | <p>I needed a good looking and realistically sized and shaped model of a horseshoe for a <a href="https://www.printables.com/model/1192616-horseshoe-phone-tablet-stand">different project</a> and after a hour of unsuccessful searching and printing I designed my own. I used a rather old and worn horseshoe from my girlfri... | [
"shoe",
"horse",
"farrier",
"horseshoe",
"pferd",
"hufeisen",
"eisen",
"hufschmied"
] | Art & Design > Other Art & Designs | [
"1191528/images/image_1_compressed.jpg",
"1191528/images/image_2_compressed.jpg",
"1191528/images/image_3_compressed.jpg",
"1191528/images/image_4_compressed.jpg",
"1191528/images/image_5_compressed.jpg",
"1191528/images/image_6_compressed.jpg"
] | [
"1191528/stls/Horseshoe.stl"
] | CC-BY | https://www.printables.com/model/1191528 | data_0046.tar |
954918 | Realme GT Master Edition Case | <p><i><strong>Hey there!</strong></i></p><p><br>I made this thick phone case for your Realme or any other phone with a simillar shape. </p><p><strong>TPU 95A recommended, 85A alternatively</strong> <i>(also tested on PETG - too hard and doesn't fit)</i>.</p><p> The case is more than 100% thicker than th... | [
"case",
"of",
"design",
"master",
"gadget",
"phone",
"easy",
"cellphone",
"cell",
"android",
"heat",
"handy",
"secure",
"airflow",
"simple",
"an",
"thick",
"for",
"anti",
"a",
"edition",
"gt",
"realme",
"antiheat"
] | Gadgets > Portable Devices | [
"954918/images/image_1_compressed.jpg",
"954918/images/image_2_compressed.jpg",
"954918/images/image_3_compressed.jpg",
"954918/images/image_4_compressed.jpg",
"954918/images/image_5_compressed.jpg",
"954918/images/image_6_compressed.jpg"
] | [
"954918/stls/Realme case - extra small vent.stl",
"954918/stls/Realme case - no vent.stl",
"954918/stls/Realme case - small vent.stl",
"954918/stls/Realme case - updated.stl",
"954918/stls/Realme case.stl"
] | CC0 | https://www.printables.com/model/954918 | data_0046.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.