model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
692533 | Fiber Laser Air Duct (Cloudray and Gweike) | <p>This duct can be used with fiber lasers with threaded bases. The mounting holes span between 100mm and 112mm. It works great on Cloudray and Gweike fiber lasers. It adapts to a quick-disconnect duct. The magnets are 12mm x 8mm N52. They are press-fit, but glue can be added if necessary.... | [
"dustcollection",
"fumeextractor",
"lasercutting",
"cloudray",
"airfiltration"
] | Hobby & Makers > Tools | [
"692533/images/image_1_compressed.jpg",
"692533/images/image_2_compressed.jpg",
"692533/images/image_3_compressed.jpg",
"692533/images/image_4_compressed.jpg"
] | [
"692533/stls/duct_fitting.stl",
"692533/stls/fiber_duct.stl"
] | CC-BY | https://www.printables.com/model/692533 | data_0047.tar |
782342 | figit star | [] | 3D Printers > Accessories | [
"782342/images/image_1_compressed.jpg",
"782342/images/image_2_compressed.jpg",
"782342/images/image_3_compressed.jpg",
"782342/images/image_4_compressed.jpg"
] | [
"782342/stls/tinker.stl"
] | CC0 | https://www.printables.com/model/782342 | data_0047.tar | |
722685 | Filament dry box cover for PRAKI cereal containers | <p>This is a replacement dry box cover with a threaded hole for PC4-M10 connector (for example, <a href="https://amzn.com/dp/B07P2XRCC1">this</a>) for <a href="https://amzn.com/dp/B09ZLBJQDW">PRAKI cereal container</a> used in <a href="https://than.gs/m/12690">marsgizmo's Filament Bunker V3</a> (compatible with Prusa 1... | [
"drybox",
"filament",
"storage",
"cover",
"cerealbox"
] | 3D Printers > Accessories | [
"722685/images/image_1_compressed.jpg",
"722685/images/image_2_compressed.jpg",
"722685/images/image_3_compressed.jpg"
] | [
"722685/stls/dry_box_cover.stl",
"722685/stls/dry_box_solid_cover.stl"
] | CC-BY | https://www.printables.com/model/722685 | data_0047.tar |
702977 | Filament guide MK4/MK3S+ | [] | 3D Printers > Prusa Parts & Upgrades | [
"702977/images/image_1_compressed.jpg"
] | [
"702977/stls/MK3S Filiment Guide 1.stl"
] | GPL2.0 | https://www.printables.com/model/702977 | data_0047.tar | |
763100 | Filament Spool for under 250Grams | <p>This is a quick printing filament spool. The largest size could hold up to 250-300 grams with no issues. The middle size could hold up to 200-250 grams with no issues. Smallest could hold up to 150 grams. 2 pieces clip together and no glue is needed with this version.<br><br>Filament pictures... | [
"spool",
"filament",
"sample"
] | 3D Printers > Accessories | [
"763100/images/image_1_compressed.jpg",
"763100/images/image_2_compressed.jpg",
"763100/images/image_3_compressed.jpg"
] | [
"763100/stls/SmallSpool-Bottom.stl",
"763100/stls/SmallSpool-Bottom_30.stl",
"763100/stls/SmallSpool-Bottom_40.stl",
"763100/stls/SmallSpool-Top.stl"
] | GPL2.0 | https://www.printables.com/model/763100 | data_0047.tar |
748539 | Filament wall holder | <p>you need a 20 mm rod with dowel screws in the wall and a smaller screw to attach the rod</p> | [
"wall",
"holder",
"filament",
"storage",
"storagesystem"
] | 3D Printers > Accessories | [
"748539/images/image_1_compressed.jpg",
"748539/images/image_2_compressed.jpg"
] | [
"748539/stls/wallholder.stl"
] | CC-BY | https://www.printables.com/model/748539 | data_0047.tar |
648599 | Filamentbox V2 Einlage für Silica Gel | <figure class="media"><oembed url="https://youtu.be/sbjGDgCiD_U"></oembed></figure> | [
"filamentspoolholder",
"filamentbox"
] | 3D Printers > Other Printer Parts & Upgrades | [
"648599/images/image_1_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/648599 | data_0047.tar |
690804 | Finger Sk8! | <p>I print with normal supports and add a dab of glue to hold the boot to the skate.</p><p>you need 4 wheels per skate. The just press into place. they can be stiff to assemble</p><p>I also added a grind rail.</p> | [
"roller",
"finger",
"skate",
"skates",
"rollerblade"
] | Toys & Games > Other Toys & Games | [
"690804/images/image_1_compressed.jpg",
"690804/images/image_2_compressed.jpg",
"690804/images/image_3_compressed.jpg",
"690804/images/image_4_compressed.jpg"
] | [
"690804/stls/aggressive - Blade.stl",
"690804/stls/aggressive - Boot.stl",
"690804/stls/aggressive - Wheel.stl",
"690804/stls/Boot.stl",
"690804/stls/rail.stl",
"690804/stls/Wheel bracket.stl",
"690804/stls/Wheel.stl"
] | CC-BY | https://www.printables.com/model/690804 | data_0047.tar |
757204 | Fish Tank Cleaning tool | <p>Aquarium cleaning tool for removing/scraping algae on the glass…</p><p> </p><p><img class="image_resized" style="width:17.56%;" src="https://media.printables.com/media/prints/757204/rich_content/ad203077-e896-44f6-9ff8-05f16e7ded2b/markus111.webp#%7B%22uuid%22%3A%22de1ca0a5-b24c-4d1f-943b-7672187464c9%22%2C%22w... | [
"tool",
"tank",
"cleaning",
"scraper",
"fish",
"removal",
"algae",
"removaltool",
"scrapertool"
] | Household > Pets | [
"757204/images/image_1_compressed.jpg",
"757204/images/image_2_compressed.jpg",
"757204/images/image_3_compressed.jpg",
"757204/images/image_4_compressed.jpg",
"757204/images/image_5_compressed.jpg",
"757204/images/image_6_compressed.jpg"
] | [
"757204/stls/Fish Tank Cleaning tool.stl"
] | CC-BY | https://www.printables.com/model/757204 | data_0047.tar |
756215 | Fish Tank Whisker Dangler | <p>Tiny Whiskered Explorer: A Playful Cat Peers into the Underwater Realm, Dangling Its Miniature Fishing Pole Over the Glass Edge of Your Fish Tank. The model is made to fit a 10mm glass thickness.</p> | [
"aquarium",
"fish",
"fishtank"
] | Household > Pets | [
"756215/images/image_1_compressed.jpg",
"756215/images/image_2_compressed.jpg"
] | [
"756215/stls/Fisher Cat.stl"
] | CC-BY | https://www.printables.com/model/756215 | data_0047.tar |
745611 | Fix for the 2mm 'too tall' height problem. | <p>So this was a very simple remix just to lose the needed height to get Surfalex's clips to fit in the notches on the support “whip"s. <br><br>Because of the heavy filleting on the part (which is the sole purpose FOR this part, in order to keep the whip assembly from snagging on other extruders during printing).... | [
"xl"
] | 3D Printers > Prusa Parts & Upgrades | [
"745611/images/image_1_compressed.jpg",
"745611/images/image_2_compressed.jpg",
"745611/images/image_3_compressed.jpg"
] | [
"745611/stls/Extruder PTFE Clip 8mm Slots 2 and 4.stl"
] | GPL2.0 | https://www.printables.com/model/745611 | data_0047.tar |
667625 | Flamingo remix by Angelo Santarella/asdesign | <p>Easy print. The two halves must be glued together. I used KrazyGlue and it worked fine. A couple of skewers made the legs. No special settings needed; I used 10% infill but I think you can use whatever you want. I added the black details with a Sharpie.<br><br>Filament: Inland Coral PLA<br> </p> | [
"bird",
"summer",
"tropical",
"flamingo"
] | Art & Design > Sculptures | [
"667625/images/image_1_compressed.jpg",
"667625/images/image_2_compressed.jpg",
"667625/images/image_3_compressed.jpg"
] | [
"667625/stls/Flamingo_Left.stl",
"667625/stls/Flamingo_Right.stl"
] | CC-BY | https://www.printables.com/model/667625 | data_0047.tar |
779451 | Flamingo remix with forward/backward limbs | <p>This is a remix of a remix! Asdesign's remix of MakerBot's flamingo is quite charming, but I didn't like its splayed-sideways leg position. I decided to remix it to put the legs in a forward/backward “walking” position.</p><p>The flamingo prints in two pieces; you'll need to glue them together. Super glue work... | [
"bird",
"summer",
"tropical",
"flamingo"
] | Art & Design > Sculptures | [
"779451/images/image_1_compressed.jpg",
"779451/images/image_2_compressed.jpg",
"779451/images/image_3_compressed.jpg",
"779451/images/image_4_compressed.jpg",
"779451/images/image_5_compressed.jpg"
] | [
"779451/stls/Remixed Flamingo.stl"
] | CC-BY | https://www.printables.com/model/779451 | data_0047.tar |
733156 | flexi benchy | <p>easy print and surprisingly really fun to play with.</p><p>have fun with it and let me know your feedback so that i can be a better designer. :)</p> | [
"toy",
"benchmark",
"benchy",
"fidget",
"articulated",
"flexible",
"articulating"
] | Toys & Games > Other Toys & Games | [
"733156/images/image_1_compressed.jpg",
"733156/images/image_2_compressed.jpg",
"733156/images/image_3_compressed.jpg"
] | [
"733156/stls/Articulated Benchy - ironkiwii.stl"
] | CC-BY | https://www.printables.com/model/733156 | data_0047.tar |
655546 | Flexi Tie V2 | <p>Flexi tie V1</p><p>https://www.printables.com/model/399236-my-first-3d-printed-necktie</p><p> </p><p>Flexi tie V2</p><p>Update: 12/10/2023 </p><p>loaded pre-assembled filed under the Pre-made folder. just click the segments together and you are done. to customize the patterns print from Build your own fold... | [
"fabric",
"tie",
"flexible",
"flexi",
"neck",
"necktie"
] | Fashion > Men | [
"655546/images/image_1_compressed.jpg",
"655546/images/image_10_compressed.jpg",
"655546/images/image_11_compressed.jpg",
"655546/images/image_12_compressed.jpg",
"655546/images/image_13_compressed.jpg",
"655546/images/image_14_compressed.jpg",
"655546/images/image_15_compressed.jpg",
"655546/images/i... | [
"655546/stls/Bambu 3MF flexi tie V2 pre-made.stl",
"655546/stls/Bambu Flexi_Tie V2.stl",
"655546/stls/Fabirc 12x12.stl",
"655546/stls/Fabirc 4x4.stl",
"655546/stls/Knot.stl",
"655546/stls/Knot_connection.stl",
"655546/stls/Side_link.stl",
"655546/stls/Side_link2.stl",
"655546/stls/Step_up_links.stl"... | CC-BY | https://www.printables.com/model/655546 | data_0047.tar |
724272 | Floss Drops for Embroidery Floss or Thread | <p>Floss Drops to organize your Embroidery Thread! Two different sizes, small and large, both with an extra space to keep the partial strands separate.</p>
<p>I'm currently using the small ones to keep my threads organized for cross stitch WIPs. You can write the DMC Floss number on one side and draw the symbol for you... | [
"organization",
"embroidery",
"thingiverse",
"crossstitch",
"embroideryfloss",
"embroiderythread",
"needlepoint"
] | Hobby & Makers > Organizers | [
"724272/images/image_1_compressed.jpg",
"724272/images/image_2_compressed.jpg",
"724272/images/image_3_compressed.jpg",
"724272/images/image_4_compressed.jpg",
"724272/images/image_5_compressed.jpg",
"724272/images/image_6_compressed.jpg",
"724272/images/image_7_compressed.jpg",
"724272/images/image_8... | [
"724272/stls/Floss_Drop_large.stl",
"724272/stls/Floss_Drop_small.stl"
] | CC-BY | https://www.printables.com/model/724272 | data_0047.tar |
710445 | Flower pot with bottom watering | <p>Flower pot with bottom watering for herbs bought in supermarket.</p>
<h3>Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>Prusa i3 plus (MK1)</p>
<p class="detail-setting rafts"><strong>Rafts: </strong>
<div><p>No</p></div>
<p><strong>Supports:</strong></p>
<p>No</p>
<p class="detail-setting resolution"><stro... | [
"thingiverse"
] | Household > Other House Equipment | [
"710445/images/image_1_compressed.jpg"
] | [
"710445/stls/flower_pot_big_with_bottom_watering_rot180.stl"
] | CC-BY | https://www.printables.com/model/710445 | data_0047.tar |
651065 | Flush your savings down the toilet! | <p><strong>Supports needed for:</strong></p><ul><li>Water tank</li><li>Upper part of the channel (between water tank and toilet vase). </li></ul><p><strong>Note:</strong> I had good results with<strong> Prusaslicer → Paint-on Supports → Automatic Paiting.</strong></p><p>I printed with PLA, 0.2mm, 15% infill. ... | [
"coin",
"present",
"funny",
"coins",
"piggybank",
"coinholder",
"wc",
"toilette",
"funnyprint"
] | Household > Other House Equipment | [
"651065/images/image_1_compressed.jpg",
"651065/images/image_2_compressed.jpg",
"651065/images/image_3_compressed.jpg"
] | [
"651065/stls/Piggy Bank - WC - Lid.stl",
"651065/stls/Piggy Bank - WC - Water Tank Lid.stl",
"651065/stls/Piggy Bank - WC.stl"
] | CC-BY | https://www.printables.com/model/651065 | data_0047.tar |
723451 | Ford Focus trunk parcel shelf rest | <p>Like the original model, print both of these (I used PETG) and line them up with the cutout for the parcel cover's rear perch. Line them up, drill a hole suitable for an M3 screw, insert M3 screws and nuts and tighten. Works just like the original clips.</p><p>I used M3-0.5x20mm but those were a bit long... | [
"shelf",
"trunk",
"ford",
"focus",
"parcel"
] | Hobby & Makers > Automotive | [
"723451/images/image_1_compressed.jpg"
] | [
"723451/stls/focus_fiesta trunk 1 minus1.2.stl",
"723451/stls/focus_fiesta trunk 2 minus1.2.stl"
] | CC-BY | https://www.printables.com/model/723451 | data_0047.tar |
702375 | Ford Galaxy Phone Holder Mount Point | <p>Simple and non-invasive base phone holder mount point for Ford Galaxy. The ball standard 17 mm.</p><p>Print lying on its side.</p> | [
"galaxy",
"ford",
"phoneholder"
] | Hobby & Makers > Automotive | [
"702375/images/image_1_compressed.jpg",
"702375/images/image_2_compressed.jpg"
] | [
"702375/stls/ford galaxy phone holder.stl"
] | CC-BY | https://www.printables.com/model/702375 | data_0047.tar |
691490 | Formbot kit LED bar holder | <p>LED bar holders to replace the ones supplied with Formbot Voron 2.4 kit.</p><p>For better lighting and saving your eyes :) bar oriented 45° down.</p><p>Highly recommend mounting it on the front top extrusion.</p><p>For mounting:</p><ul><li>M3x20 SHCS - 2pcs.</li><li>M3 T-nut - 2pcs.</li></ul><p> </p><p>In case ... | [
"holder",
"led",
"voron",
"voron24",
"formbot"
] | 3D Printers > Voron Parts & Upgrades | [
"691490/images/image_1_compressed.jpg",
"691490/images/image_2_compressed.jpg",
"691490/images/image_3_compressed.jpg"
] | [
"691490/stls/led_holder_a_formbot.stl",
"691490/stls/led_holder_b_formbot.stl"
] | GPL3.0 | https://www.printables.com/model/691490 | data_0047.tar |
685670 | Fox charm | <p>I loved DSt's design (it's a wonderful minimalist fox head!) but wished it had a better mounting loop, so I modified it a little. Use it as a little charm for a bracelet, or whatever. I made it for a phone charm strap.</p> | [
"fox",
"pendant",
"charm",
"kitsune",
"bead"
] | Fashion > Other Fashion Accessories | [
"685670/images/image_1_compressed.jpg"
] | [
"685670/stls/fox charm.stl"
] | CC-BY | https://www.printables.com/model/685670 | data_0047.tar |
751767 | Fox Proframe RS GoPro Chin Mount | <p>A collection of chin mounts for a GoPro and Fox Proframe / Proframe RS helmets. </p><p>The <code>chin_mount_flex</code> file is pretty much identical to the original model, I tightened up the fit to the helmet a bit. It will let you set any angle you want on the GoPro.</p><p>The <code>chin_mount_zero</code> fil... | [
"gopro",
"helmet",
"mountainbike",
"gopromount",
"helmetmount",
"mountainbiking"
] | Sports & Outdoor > Outdoor Sports | [
"751767/images/image_1_compressed.jpg"
] | [
"751767/stls/chin_mount_flex.stl",
"751767/stls/chin_mount_minus_five_v2.stl",
"751767/stls/chin_mount_minus_ten.stl",
"751767/stls/chin_mount_plus_five_v2.stl",
"751767/stls/chin_mount_plus_ten.stl",
"751767/stls/Proframe Chinmount Zero V3.stl"
] | CC0 | https://www.printables.com/model/751767 | data_0047.tar |
717988 | Fpv 5" drone stand | [
"shelf",
"tabletop",
"fpv",
"drones"
] | Hobby & Makers > RC & Robotics | [
"717988/images/image_1_compressed.jpg"
] | [
"717988/stls/stalakv2.stl"
] | CC0 | https://www.printables.com/model/717988 | data_0047.tar | |
789046 | Fpv Drone piloting sticks for ps5 controller | <p>Hello friends, </p><p>This is a 3d print for everyone getting in to the fpv hobby on a budget if you have the ps5 controller ofc.</p><p>it prints very fast and makes your accuracy a million times better.</p><p>i suggest printing it at 19.5 mm for x/y</p> | [
"rc",
"playstation",
"fpv",
"ps5",
"fpvdrone",
"rccontroller",
"radiotransimor"
] | Gadgets > Video Games | [
"789046/images/image_1_compressed.jpg",
"789046/images/image_2_compressed.jpg",
"789046/images/image_3_compressed.jpg",
"789046/images/image_4_compressed.jpg"
] | [
"789046/stls/FPV THUMBSTICK FOR PS5.stl"
] | CC-BY | https://www.printables.com/model/789046 | data_0047.tar |
712241 | FPV Prop Wrench | [
"nut",
"wrench",
"prop",
"fpv"
] | Hobby & Makers > Tools | [
"712241/images/image_1_compressed.jpg",
"712241/images/image_2_compressed.jpg"
] | [
"712241/stls/FPV Prop Wrench.stl"
] | CC0 | https://www.printables.com/model/712241 | data_0047.tar | |
792056 | Fridge magnet frame for Polaroid GO | <p>Frame with a place for magnet which fits a Polaroid Go size photo.</p><p>It should fit magnet with 2mm depth and hold 66.6 mm x 53.9 mm photo, smaller that Instax one. Top layer is thick enough to be printed sealed instead of a hole where the magnet goes, even with low quality settings.</p><p>Category: Camera</p> | [
"frame",
"photo",
"magnet",
"fridge",
"polaroid",
"thingiverse"
] | Gadgets > Photo & Video | [
"792056/images/image_1_compressed.jpg",
"792056/images/image_2_compressed.jpg",
"792056/images/image_3_compressed.jpg"
] | [
"792056/stls/polaroid_fridge_frame.stl"
] | LGPL | https://www.printables.com/model/792056 | data_0047.tar |
688215 | FUNKO FRANKESTEIN | [
"halloween",
"monster",
"frankenstein",
"funko",
"funkopop",
"monstruo"
] | Seasonal designs > Autumn & Halloween | [
"688215/images/image_1_compressed.jpg",
"688215/images/image_2_compressed.jpg"
] | [
"688215/stls/frankesteinBODY.stl",
"688215/stls/frankesteinHEAD.stl"
] | GPL2.0 | https://www.printables.com/model/688215 | data_0047.tar | |
801933 | Funnel for Dreame l10s ultra | <p>can be printed in PLA or PETG with 0.2mm layer height profile 2 or 3 perimeters.</p><p>Make sure you use soap for robot cleaners.</p><p>Follow the instructions in the pictures. I used my finger nail to remove the cap only the first time is difficult.</p><p>Happy printing.</p> | [
"soap",
"refill",
"funnel",
"funnels",
"dreame",
"l10s"
] | Household > Other House Equipment | [
"801933/images/image_1_compressed.jpg",
"801933/images/image_2_compressed.jpg",
"801933/images/image_3_compressed.jpg",
"801933/images/image_4_compressed.jpg"
] | [
"801933/stls/funnel dreame-Corps.stl"
] | CC-BY | https://www.printables.com/model/801933 | data_0047.tar |
706511 | Funnel for the Karcher FJ6 foam bottle kit | <p>Specially designed to adapt firmly on the refillable 750 ml Kärcher K2 K3 K4 K5 K6 K7 High Pressure Washer Snow Foam Lance Bottle Kit for Car.</p><p> </p><p>No supports needed when printed upside down.</p> | [
"funnel",
"karcher"
] | Hobby & Makers > Tools | [
"706511/images/image_1_compressed.jpg"
] | [
"706511/stls/Funnel Karcher FJ6 v7.stl"
] | CC-BY | https://www.printables.com/model/706511 | data_0047.tar |
688834 | Furniture corner guard | <p>This is a childsafe corner guard for sharp furniture corners. I printed mine in PET-G and glued it in place using hot glue gun. Can be printed in TPU for additional softness but PET-G works just fine.</p> | [
"children",
"kids",
"corner",
"cornerguard"
] | Household > Other House Equipment | [
"688834/images/image_1_compressed.jpg",
"688834/images/image_2_compressed.jpg",
"688834/images/image_3_compressed.jpg"
] | [
"688834/stls/corner_guard.stl"
] | CC-BY | https://www.printables.com/model/688834 | data_0047.tar |
714740 | fusée tintin | <p>Fusée </p> | [] | Tabletop Miniatures > Vehicles & Machines | [
"714740/images/image_1_compressed.jpg",
"714740/images/image_2_compressed.jpg"
] | [
"714740/stls/1.stl",
"714740/stls/2.2.stl",
"714740/stls/2.stl",
"714740/stls/3.2.stl",
"714740/stls/3.stl",
"714740/stls/4.2.stl",
"714740/stls/4.stl",
"714740/stls/5.2.stl",
"714740/stls/5.stl",
"714740/stls/6..2.stl",
"714740/stls/6.stl",
"714740/stls/7.stl",
"714740/stls/Ensemble Pied.st... | CC0 | https://www.printables.com/model/714740 | data_0047.tar |
797761 | Future Trunks Sword DBZ | <p>The sword wielded by future Trunks in Dragon Ball Z. I modeled this sword in Fusion360, a long time ago, using references from the anime, games and manga.</p><p>I am publishing today as a tribute to Akira Toriyama, who passed away today at age 68. Too soon, dear master, you will be remembered.</p><p> </p><p>Bes... | [
"sword",
"dbz",
"trunks"
] | Costumes & Accessories > Props | [
"797761/images/image_1_compressed.jpg",
"797761/images/image_2_compressed.jpg",
"797761/images/image_3_compressed.jpg",
"797761/images/image_4_compressed.jpg",
"797761/images/image_5_compressed.jpg"
] | [
"797761/stls/Blade Base.stl",
"797761/stls/Blade Middle.stl",
"797761/stls/Blade Tip.stl",
"797761/stls/Blade Top.stl",
"797761/stls/Guard fatter.stl",
"797761/stls/Guard left pearl.stl",
"797761/stls/Guard right pearl.stl",
"797761/stls/Handle Bottom.stl",
"797761/stls/Handle ridged bottom.stl",
... | CC-BY | https://www.printables.com/model/797761 | data_0047.tar |
704441 | Gaggia Classic Shot Mirror Holder | <p>Holder to attach to the side of the Gaggia Classic and hold a espresso shot mirror (link below).</p><p> </p><p>Printed in PLA. If I print again, I would mirror it so that the opening faces the back of the machine (if you position the mirror on the left side of the machine as I did). Tolerances are high on the v... | [
"espresso",
"mirror",
"gaggia",
"gaggiaclassic"
] | Household > Kitchen | [
"704441/images/image_1_compressed.jpg",
"704441/images/image_2_compressed.jpg",
"704441/images/image_3_compressed.jpg",
"704441/images/image_4_compressed.jpg"
] | [
"704441/stls/Gaggia mirror holder.stl"
] | CC-BY | https://www.printables.com/model/704441 | data_0047.tar |
696495 | Galadriel's Ring of Power, Nenya (Lord of the Rings) | <p>Model of Nenya, Galadriel's Ring of Power by <a href="https://blendswap.com/profile/154153">jugglenerd</a>. Originally uploaded to <a href="https://blendswap.com/blend/10056">Blend Swap</a>.</p> | [
"ring",
"fantasy",
"lordoftherings",
"blendswap"
] | Fashion > Other Fashion Accessories | [
"696495/images/image_1_compressed.jpg",
"696495/images/image_2_compressed.jpg"
] | [
"696495/stls/Gladriel Ring-netfabb.stl",
"696495/stls/Gladriel Ring.stl"
] | CC0 | https://www.printables.com/model/696495 | data_0047.tar |
680592 | Galileo 2 2507 Fan Cover for SB2209/SB2240 | <p>Maintain a unique style of Stealthburner.</p><p>No screws reguired.</p> | [
"voron",
"stealthburner",
"sb2240",
"sb2209",
"galileo2"
] | 3D Printers > Voron Parts & Upgrades | [
"680592/images/image_1_compressed.jpg"
] | [
"680592/stls/Cable_Cover_Fan.stl"
] | GPL2.0 | https://www.printables.com/model/680592 | data_0047.tar |
680582 | Galleon for Tabletop Gaming | <p>Ballista creative commons model source : <a href="https://www.thingiverse.com/thing:3238185">https://www.thingiverse.com/thing:3238185</a> </p><p>Catapult creative commons model source: <a href="https://www.thingiverse.com/thing:1763518">https://www.thingiverse.com/thing:1763518</a> </p><p>Full sized... | [
"ship",
"terrain",
"galleon"
] | Tabletop Miniatures > Vehicles & Machines | [
"680582/images/image_1_compressed.jpg",
"680582/images/image_2_compressed.jpg",
"680582/images/image_3_compressed.jpg",
"680582/images/image_4_compressed.jpg",
"680582/images/image_5_compressed.jpg"
] | [
"680582/stls/Galleon Ballista presupported.stl",
"680582/stls/Galleon Ballista.stl",
"680582/stls/Galleon Barrel for Front Mast Support.stl",
"680582/stls/Galleon Bow with flat bottom for water maps.stl",
"680582/stls/Galleon Bow.stl",
"680582/stls/Galleon Canoe Rack for Center Mast Support.stl",
"68058... | CC-BY | https://www.printables.com/model/680582 | data_0047.tar |
665804 | Gameboy Cartridge Opener | <p>Remix of "Gamebit security bit driver for 4 mm screwdriver" by @eried to work without a screwdriver. Can be used as is without any additional tools.</p><p>Since it's made of PLA and metal screws are much harder, you may only be able to use it a few times.</p><p>I printed it on a .6mm nozzle which made the bit very u... | [
"tool",
"gameboy",
"bit",
"screw",
"screwdriver",
"security"
] | Hobby & Makers > Tools | [
"665804/images/image_1_compressed.jpg"
] | [
"665804/stls/Gameboy_Cartridge_Screw_Bit.stl"
] | CC-BY | https://www.printables.com/model/665804 | data_0047.tar |
808091 | Gameboy game holder stand simple gb/gbc/gba | [
"holder",
"stand",
"gameboy",
"videogame",
"gbc",
"gba",
"gb",
"remix",
"displaystand",
"gameboycartridge"
] | Gadgets > Video Games | [
"808091/images/image_1_compressed.jpg",
"808091/images/image_2_compressed.jpg",
"808091/images/image_3_compressed.jpg",
"808091/images/image_4_compressed.jpg",
"808091/images/image_5_compressed.jpg",
"808091/images/image_6_compressed.jpg"
] | [
"808091/stls/gameboyGameStand.stl"
] | CC-BY | https://www.printables.com/model/808091 | data_0047.tar | |
738642 | Gamecube Memory Card Flap | <p>This was modeled to the original Gamecube design. It may not be the easiest to print because of that.</p><p>I printed with the shaft vertical as I wanted this to snap into the original location and revolve freely. Supports were used with a 0.08mm layer height.</p><p>I had to trim the two stoppers on each side as the... | [
"nintendo",
"console",
"gamecube"
] | Toys & Games > Other Toys & Games | [
"738642/images/image_1_compressed.jpg",
"738642/images/image_2_compressed.jpg"
] | [
"738642/stls/Gamecube Mem Flap.stl"
] | CC-BY | https://www.printables.com/model/738642 | data_0047.tar |
773034 | Gamecube Z Button Replacement | <p>Print the Z button, I recomment SLA as I'm not sure how well some of the details would come out with FDM, but prove me wrong :)<br><br>To install, do a standard teardown, follow the prep step below, and install the printed one.<br><br>You will need to either make, or reuse a z button spring. To make a spring, a pop ... | [
"replacement",
"controller",
"button",
"z",
"gamecube",
"gamecubecontroller"
] | Gadgets > Video Games | [
"773034/images/image_1_compressed.jpg"
] | [
"773034/stls/Z Button.stl"
] | CC-BY | https://www.printables.com/model/773034 | data_0047.tar |
664670 | Gamer skull wearing headset wall art | <p><a href="https://www.freepik.com/free-vector/skull-with-headset-vector-illustration-head-character-headphones_11235785.htm#query=skull%20with%20headset&position=0&from_view=search&track=ais&uuid=60976bf3-62a1-4a4e-a98f-9fef49fd0904">Image by pch.vector</a> on Freepik</p>
<p>This is another cool skull... | [
"skull",
"gamer",
"wallmount",
"headset",
"2dart",
"thingiverse",
"2dwallart"
] | Art & Design > 2D Plates & Logos | [
"664670/images/image_1_compressed.jpg",
"664670/images/image_2_compressed.jpg"
] | [
"664670/stls/skull_wearing_headset.stl"
] | CC0 | https://www.printables.com/model/664670 | data_0047.tar |
761370 | Garbage bin | <p>simple waste bin with lid.</p><p>my settings</p><ul><li>Layer height 0,25</li><li>nozzle 0,4</li><li>bin infill 5%</li><li>lid infill 15%</li><li>no supports</li></ul> | [
"office",
"lid",
"workshop",
"garbage",
"bin",
"waste"
] | 3D Printers > Accessories | [
"761370/images/image_1_compressed.jpg",
"761370/images/image_2_compressed.jpg",
"761370/images/image_3_compressed.jpg",
"761370/images/image_4_compressed.jpg"
] | [
"761370/stls/bin.stl",
"761370/stls/lid.stl"
] | CC0 | https://www.printables.com/model/761370 | data_0047.tar |
749780 | Garbage Disposal Splash Guard | <p>Yes you can just buy new splash guards at the hardware store..</p><p>Stl should load in the ideal print orientation and requires no support. You may have to adjust the thickness or of the flaps to get the ideal stiffness/flex needed. My first go was too thick and stiff to work well. Obviously depends on your TPU.</p... | [] | Household > Kitchen | [
"749780/images/image_1_compressed.jpg",
"749780/images/image_2_compressed.jpg"
] | [
"749780/stls/disposal splash guard.stl"
] | CC-BY | https://www.printables.com/model/749780 | data_0047.tar |
714638 | Garmin Venu Sq stand | <p>I wanted a stand to clip my Garmin Venu Sq watch into, at an angle that made it handy to look at the watch when charging.<br><br>Print in PLA, 15% lightning infill, flat on the base of the stand, with some tree supports on the build plate only.<br> </p> | [] | Gadgets > Other Gadgets | [
"714638/images/image_1_compressed.jpg",
"714638/images/image_2_compressed.jpg",
"714638/images/image_3_compressed.jpg",
"714638/images/image_4_compressed.jpg",
"714638/images/image_5_compressed.jpg"
] | [
"714638/stls/Venu Sq stand.stl"
] | CC-BY | https://www.printables.com/model/714638 | data_0047.tar |
673885 | Gebäck-Ausstecher, Hase (die wirklich funktionieren) / Cookie cutter (which really work) | <p>Diese Ausstecher in Form eines Hasen wurden so gestaltet, dass die Gebäckstücke leicht ausgestochen und ohne Probleme den Teig entnommen werden können.<br>Sie gibt es in verschiedenen Größen.</p><p>Die Ausstecher sind leicht zu drucken und brauchen keine Unterstützung.</p><p>Bei der Wahl des Druckmaterials sollte au... | [
"cookiecutter"
] | Household > Kitchen | [
"673885/images/image_1_compressed.jpg",
"673885/images/image_2_compressed.jpg",
"673885/images/image_3_compressed.jpg"
] | [
"673885/stls/Ausstecher, Hase 40 mm.stl",
"673885/stls/Ausstecher, Hase 60 mm.stl",
"673885/stls/Ausstecher, Hase 80 mm.stl"
] | CC-BY | https://www.printables.com/model/673885 | data_0047.tar |
758373 | Geldgeschenk Computer; Cashbox Computer; Money Gift | <p>Je nach Größe des Drucks muss das Geld entsprechend gefaltet werden.</p><p>Ich habe mit Support gedruckt, da die Schichten der Monitor-Oberseite nicht sehr dick sind.</p><p>Das Modell enthält zwei Varianten des Monitors in unterschiedlichen Positionierungen. Die Variante auf dem Kopfkommt ohne Stützen aus und hat na... | [
"gift",
"computer",
"moneybox",
"giftbox",
"voucher",
"gutschein",
"geschenk",
"geldgeschenk",
"geschenkbox",
"geschenkidee",
"cashbox",
"giftideas",
"giftidea",
"moneygift",
"gutscheinbox"
] | Gadgets > Computers | [
"758373/images/image_1_compressed.jpg",
"758373/images/image_2_compressed.jpg"
] | [
"758373/stls/computer giftbox.stl"
] | CC0 | https://www.printables.com/model/758373 | data_0047.tar |
671475 | GEN2 Large Adjustable Steel Sheet Holder | <table><tr><td rowspan="1" colspan="3" style="background-color: rgb(0, 0, 0); color: var(--table-text-always-light); vertical-align: middle; border-style: solid; border-color: rgb(0, 0, 0); border-width: 2px;"><figure class="image image-style-align-center"><img class="editor-image-resize" src="https://media.printables.... | [
"table",
"ikea",
"holder",
"desk",
"plate",
"steel",
"modular",
"magnet",
"enclosure",
"storage",
"customizable",
"lack",
"bed",
"fit",
"adjustable",
"tray",
"screw",
"magnetic",
"hold",
"bolt",
"slide",
"flex",
"rail",
"heat",
"xl",
"metal",
"anycubic",
"sheet"... | 3D Printers > Accessories | [
"671475/images/image_1_compressed.jpg",
"671475/images/image_2_compressed.jpg",
"671475/images/image_3_compressed.jpg"
] | [
"671475/stls/GEN2 Steel Sheet Holder - Rails Interface & Sliders V1.01.stl",
"671475/stls/GEN2 Steel Sheet Holder - Sides.stl",
"671475/stls/GEN2 Test Print Parts.stl",
"671475/stls/GEN2-QL Rail - Double - LARGE.stl",
"671475/stls/GEN2-QL Rail - Quad - LARGE.stl",
"671475/stls/GEN2-QL Rail - Single - LARG... | CC-BY | https://www.printables.com/model/671475 | data_0047.tar |
686897 | Geometric Pot | <p>Not my model, imported to printables to publish a make.</p><p>Original description:</p><blockquote><p>Geometric Pot inspired by <a href="https://minimum-design.com/">https://minimum-design.com</a> products.</p><p>It can be used as planter pot, pen holder, remote control holder, or for desk organization.</p><p>The re... | [] | Household > Office | [
"686897/images/image_1_compressed.jpg"
] | [
"686897/stls/Pote_Geometrico_v2.stl"
] | CC-BY | https://www.printables.com/model/686897 | data_0047.tar |
713402 | Geometry Dash Icon Keychains | <p>These are some keychains made to look like the default icons from the game Geometry Dash by RobTop. I printed these with PLA, but other materials should work. You will need to add a color change while printing to make the outline and details stand out from the rest of the icon.</p> | [
"decoration",
"geometry",
"cube",
"keychain",
"geometrydash",
"dash"
] | Art & Design > Other Art & Designs | [
"713402/images/image_1_compressed.jpg"
] | [
"713402/stls/GDBallKeychainv1.stl",
"713402/stls/GDCubeKeychainv1.stl",
"713402/stls/GDRobotKeychainv1.stl",
"713402/stls/GDShipKeychainv1.stl",
"713402/stls/GDSpiderKeychainv1.stl",
"713402/stls/GDSwingKeychainv1.1.stl",
"713402/stls/GDUfoKeychainv1.stl",
"713402/stls/GDWaveKeychainv1.stl"
] | CC0 | https://www.printables.com/model/713402 | data_0047.tar |
757020 | Giant Valentine's Day Heart Thump Puzzle Box (Easy) | <p>Giant Valentine's Day themed puzzle box: find the hidden heart (or your own custom prize)<br> </p><figure class="media"><oembed url="https://youtu.be/SuOGrPg5MMU"></oembed></figure><p><a href="https://t.co/rMyhBoEINv">youtu.be/SuOGrPg5MMU</a><br> </p><h3>Prize Compartment Dimensions</h3><p>The prize compar... | [
"puzzle",
"heart",
"valentine",
"valentinesday",
"puzzlebox",
"3dprinty"
] | Toys & Games > Puzzles & Brain-teasers | [
"757020/images/image_1_compressed.jpg",
"757020/images/image_2_compressed.jpg"
] | [
"757020/stls/Case.stl",
"757020/stls/Core.stl",
"757020/stls/Demo - Assembled.stl",
"757020/stls/Demo - Exploded View.stl",
"757020/stls/Key.stl",
"757020/stls/Prize Compartment Lid.stl",
"757020/stls/Prize.stl",
"757020/stls/Side.stl"
] | CC-BY | https://www.printables.com/model/757020 | data_0047.tar |
660483 | glove coockie cutter | <p>a coockie cutter in glove form</p> | [
"kitchen",
"christmas",
"baking",
"coockie",
"coockiecutter"
] | Household > Kitchen | [
"660483/images/image_1_compressed.jpg"
] | [
"660483/stls/glove.stl"
] | CC0 | https://www.printables.com/model/660483 | data_0047.tar |
675940 | Gnar and gina | <p>gnarbot and ginabot</p><p>print in petg at full size then assemble, the file named print 24 of these needs 24 of them printed to make up the arms and legs, then print 2 hands, 2 feet, 1 torso, 1 head of each. needs supports.</p> | [
"robot",
"android",
"robots",
"droids",
"arttoy",
"ginabot",
"gnarbot",
"androids"
] | Toys & Games > Action Figures & Statues | [
"675940/images/image_1_compressed.jpg",
"675940/images/image_2_compressed.jpg"
] | [
"675940/stls/ginahead.stl",
"675940/stls/Ginatorso.stl",
"675940/stls/gnarfoot.stl",
"675940/stls/Gnarhand.stl",
"675940/stls/gnarheadfixed.stl",
"675940/stls/Gnartorso.stl",
"675940/stls/print24ofthese.stl"
] | CC0 | https://www.printables.com/model/675940 | data_0047.tar |
680715 | Gnome de Noël qui se balance- balancing Elf for christmas tree | <p>Petit gnome en une seule pièce sur sa planche qui se balance dans un cerceau décoré de flocon et d'étoiles, prêt à suspendre pour le sapin. </p><p>A imprimer en 2 parties. Le gnome a besoin de support uniquement pour les anneaux de la balançoire : utiliser le mode Tree.</p><p>Les supports pour l'anneau au... | [
"christmas",
"balance",
"fun",
"contest",
"christmasornament",
"christmasdecoration",
"elf",
"christmastree",
"gnome",
"noel",
"balancing",
"boule",
"lutin"
] | Seasonal designs > Winter & Christmas & New Year's | [
"680715/images/image_1_compressed.jpg",
"680715/images/image_2_compressed.jpg",
"680715/images/image_3_compressed.jpg",
"680715/images/image_4_compressed.jpg"
] | [
"680715/stls/Boule-gnome-de-Noel.stl",
"680715/stls/Boule-gnome-de-Noelv2.stl",
"680715/stls/gnome-de-Noel.stl"
] | CC-BY | https://www.printables.com/model/680715 | data_0047.tar |
755210 | Golf 5 GTI keychain | <p>Just a silhouette keychain of Golf 5 GTI.</p>
Category: Keychains | [
"thingiverse"
] | Fashion > Other Fashion Accessories | [
"755210/images/image_1_compressed.jpg",
"755210/images/image_2_compressed.jpg"
] | [
"755210/stls/gti_final.stl"
] | CC-BY | https://www.printables.com/model/755210 | data_0047.tar |
791949 | Gomu Gomu No Mi (slight improvements) | <p>Print profile :<br>0,12 mm<br>3 walls<br>Top/bottom layers : 5<br>Infill : 10% Gyroid<br>Supports : yes</p> | [
"onepiece",
"gomugomu"
] | Costumes & Accessories > Props | [
"791949/images/image_1_compressed.jpg",
"791949/images/image_2_compressed.jpg",
"791949/images/image_3_compressed.jpg"
] | [
"791949/stls/Fruit.stl",
"791949/stls/Stem.stl"
] | GPL2.0 | https://www.printables.com/model/791949 | data_0047.tar |
689192 | Gothic Sleeper Mask Skull Schläfer Maske Anhänger | [
"mask",
"game",
"gaming",
"sleeper",
"gothic",
"schluesselanhaenger",
"anhaenger",
"thq",
"gothicgame",
"thqnordic",
"jowood",
"bruderschaft",
"schlaefer"
] | Toys & Games > Other Toys & Games | [
"689192/images/image_1_compressed.jpg",
"689192/images/image_2_compressed.jpg"
] | [
"689192/stls/Gothic_Skull.stl"
] | CC-BY | https://www.printables.com/model/689192 | data_0047.tar | |
712267 | Govee Led Strip 90 Degree curves | <p>Four 90 degree curves for Govee LED strips<br>Short versions have a 25mm straight part, long versions 50mm. <br>The one that's less narrow has an inner radius of 25mm.</p><p>Screw holes are optional, I used 3m double-sided tape.</p> | [
"light",
"led",
"strip",
"tube",
"ledmount",
"ledstrip",
"govee"
] | Hobby & Makers > Electronics | [
"712267/images/image_1_compressed.jpg"
] | [
"712267/stls/led-tube-curce-90-25mm-narrow.stl",
"712267/stls/led-tube-curce-90-25mm.stl",
"712267/stls/led-tube-curce-90-50mm-narrow.stl",
"712267/stls/led-tube-curce-90-50mm.stl"
] | GPL2.0 | https://www.printables.com/model/712267 | data_0047.tar |
654400 | Govee Pro Power Supply Mount | [
"mount",
"lights",
"supply",
"power",
"pro",
"govee"
] | Hobby & Makers > Electronics | [
"654400/images/image_1_compressed.jpg"
] | [
"654400/stls/Govee Pro Power Supply.stl"
] | CC0 | https://www.printables.com/model/654400 | data_0047.tar | |
695609 | Gravitrax compatible height unit hollow remix | <p>This is simple remix of nice Print-3D design. I made it hollow (to allow some drop features) and chamfer that emerging edge to made model printable without support or bad overhangs.</p> | [
"gravitrax"
] | Toys & Games > Building Toys | [
"695609/images/image_1_compressed.jpg",
"695609/images/image_2_compressed.jpg",
"695609/images/image_3_compressed.jpg"
] | [
"695609/stls/GravitraxSpacer 2HU.stl",
"695609/stls/GravitraxSpacer.stl"
] | CC0 | https://www.printables.com/model/695609 | data_0047.tar |
665054 | Gravitrax Helix | <p>have fun</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Ender 3 Pro</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-setting supports"><strong>Supports: </strong>
<div><p>No</p></div>
<p><stron... | [
"tunnel",
"thingiverse",
"helix",
"gravitrax"
] | Toys & Games > Outdoor Toys | [
"665054/images/image_1_compressed.jpg",
"665054/images/image_2_compressed.jpg"
] | [
"665054/stls/Ring.stl",
"665054/stls/Twister.stl"
] | CC-BY | https://www.printables.com/model/665054 | data_0047.tar |
669626 | GRAVTIRAX tower MINIMUM MATERIAL 24 gramm 140 mm height no support structure sand clock design. Gravitrax Turm Sanduhr design. | <p>The idea of this model was to reduce the amount of material to a minimum. </p><p>Tower height 140mm and 24 gramm of filament.</p><p>Easy to print. No support structure needed.</p><p>Sand clock design.</p> | [
"material",
"tower",
"gravitrax",
"turm",
"sanduhr",
"gravitrack"
] | Toys & Games > Other Toys & Games | [
"669626/images/image_1_compressed.jpg"
] | [
"669626/stls/tower 140 sanduhr.stl"
] | CC0 | https://www.printables.com/model/669626 | data_0047.tar |
722335 | Gridfinity - Hanna Checker Cuvette Drying Rack | <p>I currently use a lot of Gridfinity for my drawers. That's why I transferred one of my favorite Hanna checker cuvette holders to Gridfinity. You can find the original on Thinigiverse by <a href="https://www.thingiverse.com/thing:4397741">pw98</a>.</p> | [
"hanna",
"reeftank",
"gridfinity",
"hannachecker",
"cuvetteholder"
] | Hobby & Makers > Organizers | [
"722335/images/image_1_compressed.jpg",
"722335/images/image_2_compressed.jpg"
] | [
"722335/stls/Gridfinity_6Cuvette_Hanna.stl"
] | CC-BY | https://www.printables.com/model/722335 | data_0047.tar |
799953 | Gridfinity 1x1 bin | [
"gridfinity"
] | Hobby & Makers > Organizers | [
"799953/images/image_1_compressed.jpg"
] | [
"799953/stls/Gridfinity_1x1bin.stl"
] | CC0 | https://www.printables.com/model/799953 | data_0047.tar | |
751563 | Gridfinity 2x Wire strippers Holder | <p>This model is similar to my <a href="https://www.printables.com/model/497616-gridfinity-2x-flush-cutters-holder">Gridfinity 2x Flush Cutters Holder</a> model, but is built to hold wire strippers instead of flush cutters. Its 1 grid longer than the flush cutters model.</p><p> </p><p>The strippers in the photo ar... | [
"electronicsworkbench",
"wirestripper",
"gridfinity"
] | Hobby & Makers > Organizers | [
"751563/images/image_1_compressed.jpg"
] | [
"751563/stls/Gridfinity wire strippers holder 5x1x5.stl"
] | CC-BY | https://www.printables.com/model/751563 | data_0047.tar |
808366 | Gridfinity 2x2 Magnet Server | <p>This device serves up 6x2mm magnets for use with Gridfinity baseplates and modules. They are always served up in the same orientation so their polarity is always the same. This helps avoid gluing magnets in the wrong orientation.</p><p>There is an optional 2x2 gridfinity base. You can also use it ... | [
"magnet",
"magnetisch",
"gridfinity"
] | Hobby & Makers > Tools | [
"808366/images/image_1_compressed.jpg",
"808366/images/image_2_compressed.jpg",
"808366/images/image_3_compressed.jpg"
] | [
"808366/stls/Magserver II GF Base.stl",
"808366/stls/Magserver II GF Bottom.stl",
"808366/stls/Magserver II GF Stack.stl",
"808366/stls/Magserver II GF Wheel.stl"
] | CC0 | https://www.printables.com/model/808366 | data_0047.tar |
783406 | Gridfinity Bin - SD Cards | <p>I included a few different versions.</p><ul><li>1x2 - 7 cards</li><li>1x3 - 11 cards</li><li>1x4 - 15 cards</li><li>1x5 - 19 cards</li></ul><p>All are 28mm in height.</p> | [
"sd",
"sdcard",
"sdcardholder",
"photography",
"gridfinity"
] | Hobby & Makers > Organizers | [
"783406/images/image_1_compressed.jpg"
] | [
"783406/stls/gridfinity bin - sd card (1x2, 28mm).stl",
"783406/stls/gridfinity bin - sd card (1x3, 28mm).stl",
"783406/stls/gridfinity bin - sd card (1x4, 28mm).stl",
"783406/stls/gridfinity bin - sd card (1x5, 28mm).stl"
] | BSD | https://www.printables.com/model/783406 | data_0047.tar |
735561 | Gridfinity bin for LR44 batteries | <p>A gridfinity bin to hold 10 LR44 batteries</p> | [
"lr44",
"lr44battery",
"lr44batteryholder"
] | Hobby & Makers > Organizers | [
"735561/images/image_1_compressed.jpg",
"735561/images/image_2_compressed.jpg"
] | [
"735561/stls/Gridfinity bin LR44.stl"
] | CC0 | https://www.printables.com/model/735561 | data_0047.tar |
710839 | Gridfinity Bins medium size | <p>Gridfinity is the popular Modular Storage System invented by Zack Freedman. This is a remix of his <a href="https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Divider%20Bins-60721">Divider Bins</a>.</p><p>Here, I have remixed the 2x1 and 2x2 Bins for medium sized parts. <a href="https://www.printables.co... | [
"box",
"organizer",
"container",
"bin",
"smallpartsstorage",
"bins",
"gridfinity"
] | Hobby & Makers > Organizers | [
"710839/images/image_1_compressed.jpg",
"710839/images/image_2_compressed.jpg",
"710839/images/image_3_compressed.jpg"
] | [
"710839/stls/GF_Bin_1x2_10u_label_nomag_02.stl",
"710839/stls/GF_Bin_1x2_10u_label_nomag_grid_02.stl",
"710839/stls/GF_Bin_1x2_2u_label_nomag_02.stl",
"710839/stls/GF_Bin_1x2_3u_label_nomag_02.stl",
"710839/stls/GF_Bin_1x2_3u_label_nomag_grid_02.stl",
"710839/stls/GF_Bin_1x2_4u_label_nomag_02.stl",
"710... | CC-BY | https://www.printables.com/model/710839 | data_0047.tar |
690155 | Gridfinity Chapstick Holder | [
"chapstick",
"chapstickholder",
"gridfinity"
] | Hobby & Makers > Organizers | [
"690155/images/image_1_compressed.jpg"
] | [
"690155/stls/Gridfinity Chapstick Holder.stl"
] | CC-BY | https://www.printables.com/model/690155 | data_0047.tar | |
699731 | Gridfinity Credit, Debet Card or Membership Cards Holder | <p>Credits to <a href="https://www.printables.com/cs/@jcabello_504372">Jairo José Martín Cabello</a>, who is the author of the original model, which inspired this, which I based on my parametric FreeCAD Gridfinity box model.</p> | [
"cardholder",
"gridfinity"
] | Hobby & Makers > Organizers | [
"699731/images/image_1_compressed.jpg",
"699731/images/image_2_compressed.jpg"
] | [
"699731/stls/Gridfinity_Card_holder.stl"
] | GPL3.0 | https://www.printables.com/model/699731 | data_0047.tar |
675350 | Gridfinity endmill tray | <p>I could'nt find anything similiar, so I designed my own. I used 4 walls, 20% infill. I like the way it came out. Printed on an Ender 3 V2.</p> | [
"stackable",
"router",
"cnc",
"endmill",
"routerbits",
"gridfinity"
] | Hobby & Makers > Tools | [
"675350/images/image_1_compressed.jpg"
] | [
"675350/stls/Gridfinity Endmill Tray.stl"
] | CC-BY | https://www.printables.com/model/675350 | data_0047.tar |
652810 | Gridfinity Holder for DeWalt Drill Bits | <p>Use the holder that comes with a set of DeWalt bits, but install it in Gridfinity. The fit is pretty snug, so you might have a hard time getting it out. </p> | [
"drill",
"dewalt",
"drillbit",
"gridfinity"
] | Hobby & Makers > Tools | [
"652810/images/image_1_compressed.jpg"
] | [
"652810/stls/gridfinity_large_dewalt_bits.stl",
"652810/stls/gridfinity_small_dewalt_bits.stl"
] | CC-BY | https://www.printables.com/model/652810 | data_0047.tar |
753711 | Gridfinity iFixit Manta Holder | <p>Holder for the iFixit Manta set. Designed in Fusion 360 using this template, <a href="https://www.printables.com/model/286722-gridfinity-block-template-easy-to-use-for-fusion-3">Gridfinity block template</a>, but the design ideas are copied from the design by <a href="https://www.printables.com/@MichelBauer">Michel ... | [
"organizer",
"storage",
"screwdriver",
"remix",
"manta",
"gridfinity",
"ifxit",
"ifixitmanta"
] | Hobby & Makers > Organizers | [
"753711/images/image_1_compressed.jpg",
"753711/images/image_2_compressed.jpg",
"753711/images/image_3_compressed.jpg",
"753711/images/image_4_compressed.jpg",
"753711/images/image_5_compressed.jpg"
] | [
"753711/stls/iFixit Manta Gridfinity Holder.stl"
] | CC-BY | https://www.printables.com/model/753711 | data_0047.tar |
672689 | Gridfinity Labeled M3 Bins 6U | <p>The Bins are designed to use less filament so there is no place for magnets, if you would need them please feel free to tell then i will upload some with magnets to.</p><p>I used the fill feature in Orca Slicer to fill the background of the text with an other color, but you could also just paint the text in a differ... | [
"gridfinity",
"gridfinitybin"
] | Hobby & Makers > Organizers | [
"672689/images/image_1_compressed.jpg",
"672689/images/image_2_compressed.jpg",
"672689/images/image_3_compressed.jpg"
] | [
"672689/stls/1x1x6_2_M3x10_M3x12.stl",
"672689/stls/1x1x6_2_M3x12.stl",
"672689/stls/1x1x6_2_M3x16.stl",
"672689/stls/1x1x6_2_M3x16_M3x18.stl",
"672689/stls/1x1x6_2_M3x25.stl",
"672689/stls/1x1x6_2_M3x25_M3x30.stl",
"672689/stls/1x1x6_2_M3x30.stl",
"672689/stls/1x1x6_2_M3x40.stl",
"672689/stls/1x1x6... | CC-BY | https://www.printables.com/model/672689 | data_0047.tar |
717517 | Gridfinity Lilliput Screwdriver Stand | <p>This bin has six 3.5mm holes to hold lilliput screwdrivers, with cylindrical guides so the screwdrivers do not wiggle.</p><p>Walls are compatible with the original design.</p> | [
"gridfinity",
"gridfinitybin",
"gridfinityholder"
] | Hobby & Makers > Organizers | [
"717517/images/image_1_compressed.jpg"
] | [
"717517/stls/Base_lilliputs.stl",
"717517/stls/Top_Lilliputs_v1.stl",
"717517/stls/Wall_lilliputs.stl"
] | CC-BY | https://www.printables.com/model/717517 | data_0047.tar |
774975 | Gridfinity Master Collection By Griddex | <p>I have generated this collection and it contains several variations of the Gridfinity baseplates and bins.</p><p> </p><p>This will continue to be added to so please follow to keep up to date.</p><p> </p><p>Thanks</p><p>Griddex</p> | [
"organizer",
"organization",
"grid",
"gridfinity",
"griddex"
] | Hobby & Makers > Organizers | [
"774975/images/image_1_compressed.jpg",
"774975/images/image_2_compressed.jpg",
"774975/images/image_3_compressed.jpg",
"774975/images/image_4_compressed.jpg",
"774975/images/image_5_compressed.jpg",
"774975/images/image_6_compressed.jpg",
"774975/images/image_7_compressed.jpg"
] | [
"774975/stls/Gridfinity full + magnet holes + screw holes baseplate 1x1.stl",
"774975/stls/Gridfinity full + magnet holes + screw holes baseplate 2x1.stl",
"774975/stls/Gridfinity full + magnet holes + screw holes baseplate 2x2.stl",
"774975/stls/Gridfinity full + magnet holes + screw holes baseplate 3x1.stl"... | CC-BY | https://www.printables.com/model/774975 | data_0047.tar |
662579 | Gridfinity Metric Wrench Organizer | <p>A 3x4 Gridfinity Wrench organizer for metric Craftsman Wrenches: 7, 8, 10, 11, 12, 13, 14, 15 and 16 mm wrenches. This may not fit all wrench makes and models, but I have included the link to the OnShape model for anyone that wants to edit it: </p><p>https://cad.onshape.com/documents/e5bf08bf538a0d5b3db05e62/w/... | [
"wrenchholder",
"gridfinity",
"wrenchorganizer"
] | Hobby & Makers > Tools | [
"662579/images/image_1_compressed.jpg"
] | [
"662579/stls/Gridfinity Metric Wrench Organizer.stl"
] | CC-BY | https://www.printables.com/model/662579 | data_0047.tar |
746566 | Gridfinity Oral B IO brush holder | <p>Here's a small 1x1 Gridfinity block that can hold up to 4x Oral B IO brushes. <br>I also made a 2x version as 4 brushes can be a bit tight. On the 4x model the stands are placed so that there's a smaller gap against the wall, where the 'back side' of the brush should be oriented, allowing you to fit 4 brushes.&... | [
"brush",
"toothbrush",
"oralb",
"toothbrushholder",
"gridfinity",
"oralbio"
] | Household > Bathroom | [
"746566/images/image_1_compressed.jpg",
"746566/images/image_2_compressed.jpg",
"746566/images/image_3_compressed.jpg",
"746566/images/image_4_compressed.jpg"
] | [
"746566/stls/gridfinity_oral_b_io_brush_holder_x2.stl",
"746566/stls/gridfinity_oral_b_io_brush_holder_x4.stl"
] | CC-BY | https://www.printables.com/model/746566 | data_0047.tar |
680246 | Gridfinity Screw Together Baseplate - Larger STLs | <p>See parent model (below)</p> | [
"gridfinity",
"gridfinitybaseplate"
] | Hobby & Makers > Organizers | [
"680246/images/image_1_compressed.jpg"
] | [
"680246/stls/GRIDFINITY-BASE-REV2-8x3.stl",
"680246/stls/GRIDFINITY-BASE-REV2-8x4.stl",
"680246/stls/GRIDFINITY-BASE-REV2-8x5.stl",
"680246/stls/GRIDFINITY-BASE-REV2-8x6.stl",
"680246/stls/GRIDFINITY-BASE-REV2-8x7.stl",
"680246/stls/GRIDFINITY-BASE-REV2-8x8.stl"
] | CC-BY | https://www.printables.com/model/680246 | data_0047.tar |
688204 | Gridfinity silverware holders | <p>This group of models was inspired by Gridfinity_1x5x6Utensil.3mf by clarkwgriswold on Thangs.com. His did not fit my silverware well, I wanted more depth, and his only had a fork/spoon holder - I wanted a whole set, so I designed my own.</p><p>This set includes a fork/spoon holder, long and short knife holders, and ... | [] | Household > Kitchen | [
"688204/images/image_1_compressed.jpg",
"688204/images/image_2_compressed.jpg"
] | [
"688204/stls/Fork-spoon holder.stl",
"688204/stls/Knife holder.stl",
"688204/stls/Large spoon holder 1.stl",
"688204/stls/Large spoon holder 2.stl",
"688204/stls/Large spoon holder.stl",
"688204/stls/Misc holder.stl",
"688204/stls/Small knife holder.stl"
] | CC-BY | https://www.printables.com/model/688204 | data_0047.tar |
668327 | Gridfinity staples storage | [] | Household > Office | [
"668327/images/image_1_compressed.jpg"
] | [
"668327/stls/Staples.stl"
] | CC0 | https://www.printables.com/model/668327 | data_0047.tar | |
778436 | Gridfinity storage solution for Ender 3 v3 SE/KE | [
"ender",
"ender3",
"gridfinity",
"ender3v3se",
"v3se",
"ender3v3ke",
"v3ke"
] | 3D Printers > Other Printer Parts & Upgrades | [
"778436/images/image_1_compressed.jpg",
"778436/images/image_2_compressed.jpg"
] | [
"778436/stls/Gridfinity Ender 3 v3 SEKE.stl"
] | CC0 | https://www.printables.com/model/778436 | data_0047.tar | |
649849 | Grinch Christmas Ornament | <p>This is a Christmas ornament I designed, the Grinch holding an Christmas ball ornament. I found inspiration for this ornament from a photo I saw online. The ball he's holding has room for you to put your loved ones name. I included the step file to make it easier to import into Fusion 360 or you modeling software of... | [
"christmas",
"christmasornament",
"christmasdecoration",
"grinch",
"grinchmas"
] | Art & Design > 2D Plates & Logos | [
"649849/images/image_1_compressed.jpg"
] | [
"649849/stls/Grinch Ornament.stl"
] | CC-BY | https://www.printables.com/model/649849 | data_0047.tar |
675290 | grogu bola | <p>Una figurita de grogu con la bola del mando de la nave </p> | [
"mandalorian",
"yoda",
"grogu"
] | Toys & Games > Action Figures & Statues | [
"675290/images/image_1_compressed.jpg",
"675290/images/image_2_compressed.jpg",
"675290/images/image_3_compressed.jpg",
"675290/images/image_4_compressed.jpg"
] | [
"675290/stls/grogu bola 2.stl"
] | CC-BY | https://www.printables.com/model/675290 | data_0047.tar |
736893 | Groot Hueforge | <p>Groot Hueforge<br>No AMS needed. Just switch out colors at layer height.</p><p> </p><p>Don't forget the frame:</p><p><a href="https://www.printables.com/model/736920-frame-for-baby-groot-hueforge">Frame for baby groot hueforge by Dohara | Download free STL model | Printables.com</a></p><p> </p><p>Print at ... | [
"color",
"rocket",
"marvel",
"groot",
"galaxy",
"guardians",
"baby",
"guardian",
"colorswap",
"ams",
"hueforge"
] | Household > Home Decor | [
"736893/images/image_1_compressed.jpg",
"736893/images/image_2_compressed.jpg"
] | [
"736893/stls/Baby Groot 6 color studio.stl",
"736893/stls/groot_Front_200x200.stl"
] | CC-BY | https://www.printables.com/model/736893 | data_0047.tar |
746430 | guitar pick-skull | [] | Gadgets > Other Gadgets | [
"746430/images/image_1_compressed.jpg"
] | [
"746430/stls/guitar pick skull.stl"
] | CC0 | https://www.printables.com/model/746430 | data_0047.tar | |
672368 | Gunpla Display Arm for Honeycomb Storage Wall | <p>These are all the parts needed to build display arms in various configurations. Here's what you'll need to print:</p><p>Two of the arm parts, at whatever lengths are needed given the size of your built kit. Normally you'll want two different arm lengths, so you can make a triangle with the longer side used as a down... | [
"gunpla",
"gundam",
"honeycombstoragewall"
] | Art & Design > Wall-mounted | [
"672368/images/image_1_compressed.jpg",
"672368/images/image_2_compressed.jpg"
] | [
"672368/stls/Arm-100mm.stl",
"672368/stls/Arm-120mm.stl",
"672368/stls/Arm-40mm.stl",
"672368/stls/Arm-60mm.stl",
"672368/stls/Attachment-3mm-Peg.stl",
"672368/stls/Attachment-5mm-Square.stl",
"672368/stls/Connector-A.stl",
"672368/stls/Connector-B.stl",
"672368/stls/Hex-Wall-Insert.stl"
] | CC-BY | https://www.printables.com/model/672368 | data_0047.tar |
732319 | Gäste/Guests WC Schriftzug/Lettering | <p>Gäste/Guests WC Schriftzug/Lettering</p> | [
"toilet",
"wc",
"toiletdoor"
] | Art & Design > 2D Plates & Logos | [
"732319/images/image_1_compressed.jpg"
] | [
"732319/stls/Gäste WC Schild WC Solo.stl",
"732319/stls/Gäste WC Text.stl"
] | CC0 | https://www.printables.com/model/732319 | data_0047.tar |
691847 | Halter für Samsung TV-Fernbedienung. | <p>Aufsteller für Samsung TV-Fernbedienung in zwei Ausführungen.</p> | [
"samsung",
"tvremote",
"tvremoteholder"
] | Household > Living Room | [
"691847/images/image_1_compressed.jpg",
"691847/images/image_2_compressed.jpg",
"691847/images/image_3_compressed.jpg"
] | [
"691847/stls/Fernbedienungshalter TV v15.stl",
"691847/stls/Rund.stl"
] | CC0 | https://www.printables.com/model/691847 | data_0047.tar |
803275 | Hamax Siesta dětská cyklosedačka - pojistný kolík | <p>Z jedné sedačky se nám ztratil, doteď tam byl klacek, funkční, ale ne moc elegantní. Vymodeloval jsem dle originálu, vyzkoušeno, sedí. Tisknul jsem z PETG, s podpěrami. Na fotce je výtisk i s originálem</p> | [
"kolik",
"hamax",
"cyklosedacka",
"pojistny"
] | Sports & Outdoor > Outdoor Sports | [
"803275/images/image_1_compressed.jpg"
] | [
"803275/stls/Hamax Siesta_pojistný kolík.stl"
] | CC0 | https://www.printables.com/model/803275 | data_0047.tar |
650099 | Hand Crank Drill V3- Vintage Eggbeater Style | <p>This version adds all the improvements in V2 ( https://www.printables.com/model/193985-eggbeater-drill-version-2-fully-printed-no-support )</p><p>Assembly instructions, apart from the added fasteners are all the same for this version, and is covered in this video: <a href="https://youtu.be/LRMtJGYOVTI">https://youtu... | [
"drill",
"eggbeater",
"crankguard"
] | Hobby & Makers > Tools | [
"650099/images/image_1_compressed.jpg",
"650099/images/image_2_compressed.jpg",
"650099/images/image_3_compressed.jpg"
] | [
"650099/stls/Eggbeater-10ToothBevelGear.stl",
"650099/stls/Eggbeater-10ToothBevelGearChuckDrive.stl",
"650099/stls/Eggbeater-CranKnob.stl",
"650099/stls/Eggbeater-Gearwasher.stl",
"650099/stls/Eggbeater-Handle.stl",
"650099/stls/Eggbeater-spindlebushing.stl",
"650099/stls/Eggbeater-V2-reinforced-Large_g... | CC-BY | https://www.printables.com/model/650099 | data_0047.tar |
707883 | Hand grenade (flexible) | <p>Handgrenade.</p><p>Can be printed (upside down) in TPU without supports (I used 95A TPU with 5% gyroid infill)</p><p>Using flexible filament, provides a part that is much more durable and less painful when impacting on humans.</p><p>Could even be used as a stress ball, if it is printed satisfyingly malleable.</p><p>... | [
"tnt",
"grenade",
"bomb",
"handgrenade",
"stressball"
] | Toys & Games > Other Toys & Games | [
"707883/images/image_1_compressed.jpg"
] | [
"707883/stls/Handgrenade.stl"
] | CC-BY | https://www.printables.com/model/707883 | data_0047.tar |
650705 | Happy Pirate | <p>It was test printed by VreeDogNight from LM community… and it just works.<br>Recommended print drive settings for PLA filament:</p><ul><li>.2 layer height</li><li>3 perimeters</li><li>5 bottom layers</li><li>5 top layers</li><li>15% infill</li><li>No supports</li></ul> | [] | Toys & Games > Other Toys & Games | [
"650705/images/image_1_compressed.jpg",
"650705/images/image_2_compressed.jpg",
"650705/images/image_3_compressed.jpg"
] | [
"650705/stls/Happy_pirate.stl"
] | CC-BY | https://www.printables.com/model/650705 | data_0047.tar |
655863 | Harbor Freight Glove Holder with Magnetic Mount | <p>This is a re-mix of the <i>Harbor Freight Glove Holder</i> by Makerneer.</p><p>This version is now mountable to metal toolboxes with magnets. Simply superglue 6x3 mm magnets to the holes on the back. I found that 7 was a good number, but it has room to attach up to 15 magnets. </p><p> </p> | [
"harborfreight",
"gloves",
"glovebox",
"gloveboxholder"
] | Household > Other House Equipment | [
"655863/images/image_1_compressed.jpg",
"655863/images/image_2_compressed.jpg"
] | [
"655863/stls/Magnetic Glove Dispenser v1.stl"
] | CC-BY | https://www.printables.com/model/655863 | data_0047.tar |
663950 | Harley Quin | <figure class="image"><img></figure><figure class="image"><img></figure><p> </p><p> </p><p> </p> | [] | Tabletop Miniatures > Characters & Monsters | [
"663950/images/image_1_compressed.jpg"
] | [
"663950/stls/Base_01.stl",
"663950/stls/Base_02.stl",
"663950/stls/Base_03.stl",
"663950/stls/Base_04.stl",
"663950/stls/Belly.stl",
"663950/stls/Body.stl",
"663950/stls/BootLeft.stl",
"663950/stls/BootRight.stl",
"663950/stls/Grid.stl",
"663950/stls/HammerHead.stl",
"663950/stls/HammerStick.stl... | CC0 | https://www.printables.com/model/663950 | data_0047.tar |
765911 | Harry Potter Xmas Deco | [] | Seasonal designs > Winter & Christmas & New Year's | [
"765911/images/image_1_compressed.jpg"
] | [
"765911/stls/XMAS_HP_ANDEN.stl",
"765911/stls/XMAS_HP_ESCOBA.stl",
"765911/stls/XMAS_HP_GAFAS.stl",
"765911/stls/XMAS_HP_LOGO.stl",
"765911/stls/XMAS_HP_RELIQUIAS.stl",
"765911/stls/XMAS_HP_SNITCH.stl",
"765911/stls/XMAS_HP_SOMBRERO.stl"
] | CC0 | https://www.printables.com/model/765911 | data_0047.tar | |
784447 | Hc Dynamo Pardubice logo and keychain | <ul><li>I changed the filament during printing</li><li>you can only print a logo or a keychain</li><li>there are other logos on my profile</li></ul><p> <strong> cz</strong></p><ul><li>Během tisku jsem vyměnil filament</li><li>můžete vytisknout pouze logo nebo klíčenku</li><li>na mém profilu jso... | [
"logo",
"hockey",
"keychain",
"dynamo",
"hokej",
"pardubice"
] | Sports & Outdoor > Winter Sports | [
"784447/images/image_1_compressed.jpg",
"784447/images/image_2_compressed.jpg"
] | [
"784447/stls/Hc Dynamo Pardubice keychain.stl",
"784447/stls/Hc Dynamo Pardubice logo.stl"
] | CC-BY | https://www.printables.com/model/784447 | data_0047.tar |
713836 | HC-SR04 minimal case (NO SCREW HOLE) | <p>On my occasion I will end up gluing the box to another surface :)</p> | [
"box",
"case",
"minimalist",
"hcsr04"
] | Hobby & Makers > Electronics | [
"713836/images/image_1_compressed.jpg",
"713836/images/image_2_compressed.jpg",
"713836/images/image_3_compressed.jpg",
"713836/images/image_4_compressed.jpg"
] | [
"713836/stls/botcover (SREW HOLE).stl",
"713836/stls/topcover.stl",
"713836/stls/V2_botcover_NO SCREW HOLE.stl"
] | GPL3.0 | https://www.printables.com/model/713836 | data_0047.tar |
721658 | HDD holder - stand for 3.5" HDDs | <p>This is a simple HDD stand for 3.5" HDDs.</p><p>There are two stl files, one is for slim and the second one is for standart HDDs.<br><br>I also attached f3d and step files so that you can edit this model to your liking.</p> | [
"holder",
"stand",
"computer",
"hdd",
"harddisk",
"pc",
"ssd"
] | Gadgets > Computers | [
"721658/images/image_1_compressed.jpg",
"721658/images/image_2_compressed.jpg",
"721658/images/image_3_compressed.jpg",
"721658/images/image_4_compressed.jpg",
"721658/images/image_5_compressed.jpg"
] | [
"721658/stls/HDD holder slim.stl",
"721658/stls/HDD holder wide.stl"
] | CC0 | https://www.printables.com/model/721658 | data_0047.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.