model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
743260 | Kolbalt Extended Run 24V Battery Holder | <p>Simple Kobalt Battery Holder specifically designed to hold an extended run battery. I angled it and made it a little loose for easy access. </p><p>Printed in PLA, 15% infill, triple wall.</p> | [
"holder",
"battery",
"kobalt"
] | Hobby & Makers > Organizers | [
"743260/images/image_1_compressed.jpg"
] | [
"743260/stls/Kobalt Extended Battery Holder V2.stl",
"743260/stls/Kobalt Extended Battery Holder.stl"
] | CC-BY | https://www.printables.com/model/743260 | data_0047.tar |
762327 | krabička | [
"krabicka"
] | Hobby & Makers > Organizers | [
"762327/images/image_1_compressed.jpg"
] | [
"762327/stls/krabička na sluchátka universal.stl"
] | BSD | https://www.printables.com/model/762327 | data_0047.tar | |
660621 | Krawatten oder Gürtel Hänger | [
"hanger",
"tie",
"guertel",
"krawatte"
] | Fashion > Other Fashion Accessories | [
"660621/images/image_1_compressed.jpg",
"660621/images/image_2_compressed.jpg"
] | [
"660621/stls/Krawattenhänger.stl"
] | CC0 | https://www.printables.com/model/660621 | data_0047.tar | |
807870 | Kunai Keychain (Naruto) | <p>For dual color switch filament at layer 18</p> | [
"accessory",
"keychain",
"key",
"keyring",
"keys",
"accessories",
"keychains",
"keytag",
"kunai",
"naruto",
"keyaccessories"
] | Gadgets > Other Gadgets | [
"807870/images/image_1_compressed.jpg",
"807870/images/image_2_compressed.jpg"
] | [
"807870/stls/Kunai-Naruto.stl"
] | CC-BY | https://www.printables.com/model/807870 | data_0047.tar |
737416 | Label holder for cables | [
"cable",
"label"
] | Hobby & Makers > Organizers | [
"737416/images/image_1_compressed.jpg",
"737416/images/image_2_compressed.jpg"
] | [
"737416/stls/cable_label-20mm.stl",
"737416/stls/cable_label-30mm.stl",
"737416/stls/cable_label-40mm.stl",
"737416/stls/cable_label-62mm.stl"
] | CC-BY | https://www.printables.com/model/737416 | data_0047.tar | |
796105 | Label/Sticker handle for Gridfinity Modular Drawers | <p>I own a label maker which prints 12x40 stickers. I wanted to have space to add them to the handle of the drawers facing outwards - this reprofiles the handle to achieve that.</p><p>Originally made for the 6U remix (<a href="https://www.printables.com/model/571092-6u-gridfinity-modular-drawer-system">https://www.prin... | [
"gridfinity"
] | Hobby & Makers > Organizers | [
"796105/images/image_1_compressed.jpg",
"796105/images/image_2_compressed.jpg",
"796105/images/image_3_compressed.jpg"
] | [
"796105/stls/drawerhandle_label_v1.stl"
] | CC-BY | https://www.printables.com/model/796105 | data_0047.tar |
669736 | Labrador | [] | World & Scans > Animals | [
"669736/images/image_1_compressed.jpg"
] | [
"669736/stls/Labrador 3D.stl"
] | CC0 | https://www.printables.com/model/669736 | data_0047.tar | |
718640 | Ladestation für Samsung Galaxy Watch 3, 4, 5 & 6 (leicht zu drucken) / Wireless charger stand for Samsung Galaxy Watch 3, 4, 5 & 6 (easy to print) | <p>Wenn die Samsung Galaxy Watch ein steifes oder geschlossenes Armband hat, kann sie bei vielen Ladestationen nicht optimal oder gar nicht geladen werden.<br>Diese Ladestation stellt das optimale Laden der Galaxy Watch mit allen Arten von Armbändern sicher.</p><p>Die Ladestation ist modular aufgebaut:<br>Der Kopf ist ... | [
"stand",
"samsung",
"galaxy",
"charger",
"wireless",
"watch"
] | Household > Other House Equipment | [
"718640/images/image_1_compressed.jpg",
"718640/images/image_10_compressed.jpg",
"718640/images/image_11_compressed.jpg",
"718640/images/image_12_compressed.jpg",
"718640/images/image_13_compressed.jpg",
"718640/images/image_14_compressed.jpg",
"718640/images/image_2_compressed.jpg",
"718640/images/im... | [
"718640/stls/Fuss, optimiert.stl",
"718640/stls/Kopf, Drittanbieter, optimiert.stl",
"718640/stls/Kopf, Drittanbieter.stl",
"718640/stls/Kopf, Original, optimiert.stl",
"718640/stls/Kopf, Original.stl",
"718640/stls/Mast, kurz, optimiert.stl",
"718640/stls/Mast, kurz.stl",
"718640/stls/Mast, lang, opt... | CC-BY | https://www.printables.com/model/718640 | data_0047.tar |
671352 | Lambda keychain - FAST PRINT | <p>Easy and fast print.</p><p>with attached gcode, print in 14minutes.</p> | [
"keychain",
"halflife",
"lambda",
"klicenka"
] | Fashion > Other Fashion Accessories | [
"671352/images/image_1_compressed.jpg",
"671352/images/image_2_compressed.jpg"
] | [
"671352/stls/lambda_keychain.stl"
] | CC-BY | https://www.printables.com/model/671352 | data_0047.tar |
672456 | Lambo Silhouette | <p>Lambo silhouette to decorate your office/personal space. I printed this in Prusa Galaxy Black. I love the look, but it's very fragile in places.</p> | [
"art",
"automotive",
"silhouette",
"sportscar",
"exotic"
] | Household > Home Decor | [
"672456/images/image_1_compressed.jpg"
] | [
"672456/stls/Lambo_Hurrican_135.stl"
] | CC-BY | https://www.printables.com/model/672456 | data_0047.tar |
724204 | Lamp Base | <p><strong>Disclaimer: This design is provided "as is" and is used at your own risk. This design has not been safety tested or validated to any standard and may pose serious safety risks, including fire or electric shock. Do not leave the design unattended when plugged into an electrical outlet.</strong></p><p> </... | [
"light",
"lamp",
"holder",
"socket",
"lantern",
"hanging",
"cord",
"base",
"e27",
"e26"
] | Household > Home Decor | [
"724204/images/image_1_compressed.jpg",
"724204/images/image_2_compressed.jpg",
"724204/images/image_3_compressed.jpg",
"724204/images/image_4_compressed.jpg"
] | [
"724204/stls/lamp base.stl",
"724204/stls/lamp nut.stl",
"724204/stls/lamp shade with nut.stl"
] | CC-BY | https://www.printables.com/model/724204 | data_0047.tar |
741966 | Lamp Shade | <p>Simple lamps have become quite expensive, better print them!</p><p>Print in vasemode. I used FormFutura HDGlass SeeThroughBlack.</p> | [
"lamp",
"lampe",
"shade",
"lampenschirm"
] | Household > Home Decor | [
"741966/images/image_1_compressed.jpg"
] | [
"741966/stls/Lamp.stl"
] | CC0 | https://www.printables.com/model/741966 | data_0047.tar |
808468 | Large Thomas the Tank Engine - Thomas & Friends | <p>Large Thomas the Tank Engine - Thomas & Friends</p> | [] | 3D Printers > Accessories | [
"808468/images/image_1_compressed.jpg"
] | [
"808468/stls/thomas-g-bar.stl",
"808468/stls/thomas-g-base-back.stl",
"808468/stls/thomas-g-base-front.stl",
"808468/stls/thomas-g-body.stl",
"808468/stls/thomas-g-chassis.stl",
"808468/stls/thomas-g-face.stl",
"808468/stls/thomas-g-ladder.stl",
"808468/stls/thomas-g-lamp-back.stl",
"808468/stls/tho... | CC0 | https://www.printables.com/model/808468 | data_0047.tar |
795077 | Laundry Powder / Liquid / Detergent Dosing Cup | <p>This is a dosing cup for laundry detergent (e.g. for powder or liquid) that I created. Common dosing amounts are marked within the print. It is also helpful for scratching out the last rests from a big powder box.</p><p>Please consider a small contribution to my Paypal. It would be well appreciated :)</p><p>Paypal.m... | [
"laundry",
"laundrydetergent",
"dosingcup",
"waschmittel",
"waschpulver"
] | Household > Other House Equipment | [
"795077/images/image_1_compressed.jpg",
"795077/images/image_2_compressed.jpg",
"795077/images/image_3_compressed.jpg"
] | [
"795077/stls/Waschmittelbehaelter.stl"
] | CC-BY | https://www.printables.com/model/795077 | data_0047.tar |
691205 | LC Fiber Cap | <p>3D Printable LC fiber cap, also has pass through hole in the bottom for strings, hooks etc.</p><p>Printed on: Prusa MK3S+</p><p>Supports Needed: No, print part with holes for LC connector facing upwards</p> | [
"fiber",
"networking",
"switching",
"sfp",
"fibre",
"fiberoptic",
"lcfibre",
"fibreoptic"
] | Gadgets > Computers | [
"691205/images/image_1_compressed.jpg",
"691205/images/image_2_compressed.jpg",
"691205/images/image_3_compressed.jpg"
] | [
"691205/stls/LC-Cap.stl"
] | GPL3.0 | https://www.printables.com/model/691205 | data_0047.tar |
716778 | LED Risers for QIDI X-Max 3 | <p>This was originally published on printables by somebody else but it is no longer available and I am unable to link to the original creator.</p><p>The risers sit where the top cover sits, and the top cover fits perfectly onto the risers so it can still be used. The LED strips attach to the bottom of the riser that is... | [
"led",
"qidi",
"xmax3",
"ledriser",
"lightupgrade"
] | 3D Printers > Other Printer Parts & Upgrades | [
"716778/images/image_1_compressed.jpg",
"716778/images/image_2_compressed.jpg",
"716778/images/image_3_compressed.jpg"
] | [
"716778/stls/C1.stl",
"716778/stls/C3.stl"
] | CC0 | https://www.printables.com/model/716778 | data_0047.tar |
700988 | LED Strip Diffuser Bracket for Prusa MK3S+ / MK4 Enclosure | <p>LED Light Strip bracket / diffuser for the Original Prusa Enclosure. These brackets attach using either the <a href="https://www.prusa3d.com/product/nylon-rivet-3-1x4-5-75-pcs-set/">Prusa rivets</a> or your own 3d printed ones (I used <a href="https://www.printables.com/model/341553-original-prusa-enclosure-push-riv... | [
"prusa",
"led",
"enclosure",
"ledstrip",
"diffuser"
] | 3D Printers > Prusa Parts & Upgrades | [
"700988/images/image_1_compressed.jpg",
"700988/images/image_2_compressed.jpg",
"700988/images/image_3_compressed.jpg",
"700988/images/image_4_compressed.jpg",
"700988/images/image_5_compressed.jpg"
] | [
"700988/stls/LED Diffuser Bracket Prusa Enclosure - FB Short.stl",
"700988/stls/LED Diffuser Bracket Prusa Enclosure - LR Long.stl",
"700988/stls/LED Diffuser Bracket Prusa Enclosure-center-LRFB.stl"
] | CC-BY | https://www.printables.com/model/700988 | data_0047.tar |
717707 | LEGO Brick Separator/Bottle Opener | <p>3D printable Bottle Separator/Brick Opener... Ummm, Brick Separator Bottle Opener!</p><p>Printed in PETG, <strong>0.5 mm</strong> nozzle, <strong>0.25 mm</strong> layer height, <strong>8</strong> top and bottom layer, <strong>6</strong> wall loops.</p><p>Based on LEGO Brick and Axle Separator and Victorinox Forreste... | [
"lego",
"bottleopener",
"bricks",
"legobrickseparator",
"legobottleopener"
] | Gadgets > Other Gadgets | [
"717707/images/image_1_compressed.jpg",
"717707/images/image_2_compressed.jpg",
"717707/images/image_3_compressed.jpg",
"717707/images/image_4_compressed.jpg",
"717707/images/image_5_compressed.jpg",
"717707/images/image_6_compressed.jpg",
"717707/images/image_7_compressed.jpg",
"717707/images/image_8... | [
"717707/stls/bsbo-rev-b.stl"
] | CC-BY | https://www.printables.com/model/717707 | data_0047.tar |
694700 | Lego Compatible (11241.dat) Duplo Compatible Horse Baby Foal Pony | [] | Toys & Games > Building Toys | [
"694700/images/image_1_compressed.jpg"
] | [
"694700/stls/11241_fixed_smooth.stl"
] | CC0 | https://www.printables.com/model/694700 | data_0047.tar | |
782683 | Lego Compatible (22961.dat) Technic Axle with Perpendicular Pin Hole | [] | Toys & Games > Building Toys | [
"782683/images/image_1_compressed.jpg"
] | [
"782683/stls/22961_fixed.stl"
] | CC0 | https://www.printables.com/model/782683 | data_0047.tar | |
782679 | Lego Compatible (32002.dat) Technic Pin 3/4 | [] | Toys & Games > Building Toys | [
"782679/images/image_1_compressed.jpg"
] | [
"782679/stls/32002_fixed.stl"
] | CC0 | https://www.printables.com/model/782679 | data_0047.tar | |
703674 | LEGO display stand (mini space shuttle) | <p>A simple stand to display a LEGO model</p><p>Remixed from <a href="https://www.printables.com/de/@hxla_1434303">hxla</a>s space shuttle stand, just made it smaller and slimmer.<br>It didn't turn out perfect though, as I had trouble with editing the stl file.</p><p>Maybe I'll add a new, parametric version in the futu... | [
"display",
"stand",
"lego",
"legocompatible",
"spaceshuttle",
"legostand",
"legodisplay"
] | Tabletop Miniatures > Miniature Gaming Accessories | [
"703674/images/image_1_compressed.jpg",
"703674/images/image_2_compressed.jpg"
] | [
"703674/stls/space shuttle stand slim v4_fixed.stl"
] | GPL3.0 | https://www.printables.com/model/703674 | data_0047.tar |
702417 | LEGO Grinder | [
"herb",
"grinder"
] | Household > Kitchen | [
"702417/images/image_1_compressed.jpg",
"702417/images/image_2_compressed.jpg",
"702417/images/image_3_compressed.jpg",
"702417/images/image_4_compressed.jpg",
"702417/images/image_5_compressed.jpg"
] | [
"702417/stls/AGUJERO.stl",
"702417/stls/INF.stl",
"702417/stls/MED.stl",
"702417/stls/SUP (1).stl",
"702417/stls/tapon.stl"
] | CC0 | https://www.printables.com/model/702417 | data_0047.tar | |
737961 | Lego McLaren F1 Wall Mount Bracket | <p>Bracket to mount Lego McLaren on the wall</p> | [] | Art & Design > Wall-mounted | [
"737961/images/image_1_compressed.jpg",
"737961/images/image_2_compressed.jpg"
] | [
"737961/stls/Lego McLaren F1 Wall Mount.stl"
] | CC-BY | https://www.printables.com/model/737961 | data_0047.tar |
777503 | Lego Saber Support Free Closer to Original hilt | [
"original",
"lego",
"lightsaber"
] | Toys & Games > Other Toys & Games | [
"777503/images/image_1_compressed.jpg"
] | [
"777503/stls/Blades Stronger(2 perimeters).stl",
"777503/stls/Lego Saber.stl"
] | CC-BY | https://www.printables.com/model/777503 | data_0047.tar | |
743079 | LEGO shelf | <p>Put your LEGO builds up with style..!</p>
<p>This is a simple smal way to store your builds.</p>
<p>Fits perfect to any LEGO part.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Ender 3 Pro</p></div>
<p><strong>R... | [
"shelf",
"lego",
"thingiverse",
"shelfbracket",
"legoshelf"
] | Toys & Games > Outdoor Toys | [
"743079/images/image_1_compressed.jpg",
"743079/images/image_2_compressed.jpg",
"743079/images/image_3_compressed.jpg",
"743079/images/image_4_compressed.jpg",
"743079/images/image_5_compressed.jpg"
] | [
"743079/stls/LEGO_hylla.stl"
] | CC-BY | https://www.printables.com/model/743079 | data_0047.tar |
709760 | Lego Star Wars pack | [] | Toys & Games > Action Figures & Statues | [
"709760/images/image_1_compressed.jpg"
] | [
"709760/stls/mandalorian helmet 2.stl",
"709760/stls/mandalorian helmet.stl",
"709760/stls/mandalorian jetpack.stl",
"709760/stls/mandalorian torso 2.stl",
"709760/stls/mandalorian torso.stl",
"709760/stls/mandalorian visor.stl",
"709760/stls/ren.stl",
"709760/stls/trooper arc pilot.stl",
"709760/st... | CC0 | https://www.printables.com/model/709760 | data_0047.tar | |
699227 | LEGO Technic - Lamborghini Sian FKP 37 (42115) Wall Mount | <p>Printed with 3 perimiters and 50% infill.</p><p>Wall Mounts for the other super cars:</p><ul><li><a href="https://www.printables.com/model/637192-lego-technic-porsche-911-gt3-rs-42056-wall-mount">LEGO Technic - Porsche 911 GT3 RS (42056)</a> by ravestop</li><li><a href="https://www.printables.com/model/637200-lego-t... | [
"wallmount",
"lego",
"technic",
"lamborghini",
"sian",
"42115"
] | Toys & Games > Vehicles | [
"699227/images/image_1_compressed.jpg"
] | [
"699227/stls/Lego_Lamborghini_42115_Wall_Mount.stl"
] | CC-BY | https://www.printables.com/model/699227 | data_0047.tar |
808403 | Leprechaun Hat | [
"hat",
"stpatricksday",
"leprechaun",
"patricksday"
] | Toys & Games > Other Toys & Games | [
"808403/images/image_1_compressed.jpg"
] | [
"808403/stls/Leprechaun_Hat.stl"
] | CC-BY | https://www.printables.com/model/808403 | data_0047.tar | |
700958 | Letter Inlays for MMU3 Buffer | <p>Modeled for a Push/Snap in fit with or without super glue. Letters are raised above the surface. If you want them flush, scale them to 98%. This may also help the fit if your letters don't print perfectly.</p> | [] | 3D Printers > Prusa Parts & Upgrades | [
"700958/images/image_1_compressed.jpg"
] | [
"700958/stls/Inlays For MMU3 Segmenter.stl"
] | CC0 | https://www.printables.com/model/700958 | data_0047.tar |
711221 | Lezyne Strip Drive Rear 400+ Bracket Mount | <p>I don't like the original rubber band mount, so I developed a more stable solution.</p><p> </p><p>The brackets are designed for M3x20 screws and standard M3 nuts.</p><p> </p><p>13.09.2024 Update: New version uses zipties instead of screws</p><p> </p><p><strong>CAD Model</strong></p><p><a href="https:/... | [
"mount",
"bikemount",
"strip",
"bracket",
"drive",
"bicycle",
"bike",
"mountainbike",
"mountingbracket",
"bicyclemount",
"bicyclelightmount",
"rear",
"fahrrad",
"bicyclelight",
"lezyne",
"rearlight",
"bikelightmount",
"mountainbikemount",
"fahrradlichter",
"bicycleholder",
"f... | Sports & Outdoor > Outdoor Sports | [
"711221/images/image_1_compressed.jpg",
"711221/images/image_2_compressed.jpg",
"711221/images/image_3_compressed.jpg",
"711221/images/image_4_compressed.jpg",
"711221/images/image_5_compressed.jpg"
] | [
"711221/stls/LezyneStripDriveRear400 - Clamp.stl",
"711221/stls/LezyneStripDriveRear400 - Mount.stl",
"711221/stls/LezyneStripDriveRear400 Ziptie.stl"
] | CC-BY | https://www.printables.com/model/711221 | data_0047.tar |
790951 | Light bar (WLED) | <p>Stand for 1m aluminium led strip profile. You can put there WS2812B LED strip with wled. Inside the base is space for the electronics, in my case Wemos D1. </p><p> </p><p>Printed on Ender 3 V2 with 0.5 mm nozzle without supports.</p><p> </p><p>The size of the ALU profile is 8.4 mm x 16.80 mm. </p... | [
"led",
"strip",
"ledstrip",
"ledlamp",
"ledlightbar"
] | Hobby & Makers > Electronics | [
"790951/images/image_1_compressed.jpg",
"790951/images/image_2_compressed.jpg",
"790951/images/image_3_compressed.jpg",
"790951/images/image_4_compressed.jpg",
"790951/images/image_5_compressed.jpg"
] | [
"790951/stls/led_stand.stl",
"790951/stls/led_stand_base.stl"
] | CC0 | https://www.printables.com/model/790951 | data_0047.tar |
738471 | Lil Articulated Pumpkin Snowman Fidget | <p>These lil pumpkin snowpeople have two spheres bodies - similar to a <a href="https://en.wikipedia.org/wiki/Snowman#Japan">Japanese yukidaruma</a>.</p><p><a href="https://www.printables.com/model/612774">Download the base model here</a></p><figure class="media"><oembed url="https://youtu.be/h_6IVLau064"></oembed></fi... | [
"toy",
"little",
"pumpkin",
"snowman",
"fidget",
"3dprinty",
"snowpeople",
"yukidaruma"
] | Toys & Games > Other Toys & Games | [
"738471/images/image_1_compressed.jpg"
] | [
"738471/stls/Demo - Assembled.stl",
"738471/stls/Lil Pumpkin Snowman Base with Arm Holes.stl",
"738471/stls/Lil Pumpkin Snowman Base.stl"
] | CC-BY | https://www.printables.com/model/738471 | data_0047.tar |
676803 | Lilygo T-Echo bracket case | <p>The Lilygo T-Echo Meshtastic communicator, <a href="https://www.lilygo.cc/products/t-echo,">https://www.lilygo.cc/products/t-echo,</a> comes in a case but all three important buttons are exposed to being accidentally pressed. This bracket protects the device from such accidental button presses and provides a c... | [
"case",
"bracket",
"meshtastic"
] | Gadgets > Other Gadgets | [
"676803/images/image_1_compressed.jpg"
] | [
"676803/stls/Lilygo_T-Echo_bracket_case.stl"
] | CC0 | https://www.printables.com/model/676803 | data_0047.tar |
761507 | Linked Hearts Hanging Ornament (Print-in-Place) | <p><strong>Linked Hearts Hanging Ornament</strong></p><p>A simple hanging linked hearts ornament that prints in place, pre-linked, with minimal support.</p><p>Prints with minimal support, just a brim, because of the small contact areas. May need finishing on face that touches the bed depending on how well your printer ... | [
"hanging",
"printinplace",
"ornament",
"ornaments",
"hearts",
"valentine",
"valentinesday",
"valentinesdaygifts",
"heartshaped"
] | Art & Design > Other Art & Designs | [
"761507/images/image_1_compressed.jpg",
"761507/images/image_2_compressed.jpg",
"761507/images/image_3_compressed.jpg"
] | [
"761507/stls/Linked Hearts.stl"
] | CC-BY | https://www.printables.com/model/761507 | data_0047.tar |
776318 | Linux tux keychain MULTICOLOR | [
"multimaterial",
"mmu",
"multicolor",
"multicolour",
"mmu2s",
"mmu2",
"keychain",
"multicoloured",
"multimaterialprint",
"keychains",
"keytag",
"mmu3",
"linux",
"tux",
"linuxlogo",
"keytags"
] | Art & Design > 2D Plates & Logos | [
"776318/images/image_1_compressed.jpg"
] | [
"776318/stls/TuxKeychain.stl"
] | GPL2.0 | https://www.printables.com/model/776318 | data_0047.tar | |
652224 | Linzer Augen - Keksausstecher (mehrere Versionen) | <p>Einfach zu drucken, kein Support notwendig</p><p>Alternative Namen: </p><ul><li>Linzer Auge</li><li>Linzeraugen</li><li>Linzereye</li><li>Linzereyes</li><li>Cookie Cutter</li><li>cookiecutter</li><li>cookie cutters</li><li>cookiecutters</li></ul> | [
"cookie",
"cutter",
"cookiecutter",
"linzer"
] | Household > Kitchen | [
"652224/images/image_1_compressed.jpg",
"652224/images/image_2_compressed.jpg",
"652224/images/image_3_compressed.jpg"
] | [
"652224/stls/Linzerauge_0holes.stl",
"652224/stls/Linzerauge_1hole.stl",
"652224/stls/Linzerauge_3holes.stl",
"652224/stls/Linzerauge_4heart.stl",
"652224/stls/Linzerauge_Octagon.stl"
] | CC-BY | https://www.printables.com/model/652224 | data_0047.tar |
669663 | Little Boy Brew - Pocket Launcher | <p>The “Little Boy Brew” is a cool little pocket launcher that uses a two part projectile consisting of a casing and bullet! Can shoot over 20 feet with a little bit of an upwards angle. This is quite powerful at close range so you appropriate caution when firing.</p><p>Simple to print and build! Only requires a few ex... | [
"desktoy",
"launcher"
] | Toys & Games > Other Toys & Games | [
"669663/images/image_1_compressed.jpg",
"669663/images/image_2_compressed.jpg",
"669663/images/image_3_compressed.jpg",
"669663/images/image_4_compressed.jpg",
"669663/images/image_5_compressed.jpg"
] | [
"669663/stls/Back Plate.stl",
"669663/stls/Barrel Latch.stl",
"669663/stls/Barrel.stl",
"669663/stls/Bullet Casing.stl",
"669663/stls/Bullet.stl",
"669663/stls/Frame.stl",
"669663/stls/Striker Latch.stl",
"669663/stls/Striker.stl"
] | CC-BY | https://www.printables.com/model/669663 | data_0047.tar |
746166 | Little Tikes Basketball Hoop Height Hinge | <p>0.2mm resolution works fine. Print flat on back of part</p> | [
"toy",
"toys",
"littletikes",
"basketballhoop",
"basketball"
] | Sports & Outdoor > Other Sports | [
"746166/images/image_1_compressed.jpg",
"746166/images/image_2_compressed.jpg"
] | [
"746166/stls/Basketball_Height_Adjustment_Hinge.stl"
] | CC-BY | https://www.printables.com/model/746166 | data_0047.tar |
692008 | llavero copa del mundo/ world cup keychain | [
"futbol",
"soccer",
"argentina",
"copa",
"mundial",
"wordcup"
] | Sports & Outdoor > Indoor Sports | [
"692008/images/image_1_compressed.jpg",
"692008/images/image_2_compressed.jpg"
] | [
"692008/stls/llavero copa1.stl"
] | CC0 | https://www.printables.com/model/692008 | data_0047.tar | |
794065 | llaveros del abecedario - Letras | <p>Cualquier letra que necesites con un colgante para llavero, originalmente están hechas con ese propósito pero pueden ser utilizadas para otras tareas como organizadores.</p> | [] | 3D Printers > Accessories | [
"794065/images/image_1_compressed.jpg",
"794065/images/image_2_compressed.jpg"
] | [
"794065/stls/A.stl",
"794065/stls/B.stl",
"794065/stls/C.stl",
"794065/stls/D.stl",
"794065/stls/E.stl",
"794065/stls/F.stl",
"794065/stls/G.stl",
"794065/stls/H.stl",
"794065/stls/I.stl",
"794065/stls/J.stl",
"794065/stls/K.stl",
"794065/stls/L.stl",
"794065/stls/M.stl",
"794065/stls/N.st... | CC0 | https://www.printables.com/model/794065 | data_0047.tar |
662382 | LM2596 step down 21x43mm mount | <p>This is a remix of <a href="https://www.thingiverse.com/thing:2154260">http://www.thingiverse.com/thing:2154260</a> snug fit for the popular 21x43mm boards. Mount the PCB with m3x4 screws.</p>
<p>The v2 version has mounting holes that are 58mm apart, which is the same as for the Raspberry Pi. That way it is possible... | [
"thingiverse"
] | Hobby & Makers > Electronics | [
"662382/images/image_1_compressed.jpg",
"662382/images/image_2_compressed.jpg",
"662382/images/image_3_compressed.jpg",
"662382/images/image_4_compressed.jpg",
"662382/images/image_5_compressed.jpg"
] | [
"662382/stls/LM2596-step-down-21x43mm-v2.stl",
"662382/stls/LM2596-step-down-21x43mm.stl"
] | CC-BY | https://www.printables.com/model/662382 | data_0047.tar |
767518 | Load Cell Scale Mount (75mm, 10mm between screws) | <p>Made to fit those:<br><img src="https://media.printables.com/media/prints/767518/rich_content/e69f58dd-9fb5-4a53-a211-1df9edb06f74/image.png#%7B%22uuid%22%3A%22f524624c-4c21-4cac-97bb-88bcd88c69ce%22%2C%22w%22%3A1478%2C%22h%22%3A496%7D"><br>for example <a href="https://www.adafruit.com/product/4543">https://www.adaf... | [
"loadcell",
"hx711",
"nau7802"
] | Hobby & Makers > Electronics | [
"767518/images/image_1_compressed.jpg"
] | [
"767518/stls/loadcell_legs_V1.stl",
"767518/stls/loadcell_plate_V1.stl"
] | CC0 | https://www.printables.com/model/767518 | data_0047.tar |
712933 | Lockable Hinged Emergency Box | <p>The box was designed to be used with <a href="https://www.printables.com/@fechnert">@fechnert's</a> tamper evident lock <a href="https://www.printables.com/model/625502-faster-print-tamper-evident-lock-seal">remix</a> (to be printed with 0.4mm nozzle max!).</p><p>Inner dimensions: H 174mm x W 144mm x D 77mm</p><p>Th... | [
"box",
"case",
"lid",
"hinge",
"seal",
"emergency",
"hingedbox",
"emergencybox"
] | Household > Other House Equipment | [
"712933/images/image_1_compressed.jpg",
"712933/images/image_2_compressed.jpg"
] | [
"712933/stls/Emergency Box_Case.stl",
"712933/stls/Emergency Box_Lid.stl",
"712933/stls/Grate.stl",
"712933/stls/Insert_bottom.stl",
"712933/stls/Insert_Grate.stl",
"712933/stls/Insert_top.stl",
"712933/stls/Insert_top_bottom.stl"
] | CC-BY | https://www.printables.com/model/712933 | data_0047.tar |
696737 | Logi MX Keys Square Keycap | <p>I droped my MX Keys. It broke, well, no it still works but 3 keycaps got destroyed. A lot of searching around, they are too expensive on ebay, Logitech doesn't provide any spareparts. So I Reverse Engineered it and did some adjustments for 3D printing. </p><p>I printed it out using a SLA printer and if the mech... | [
"keyboard",
"logitech",
"sparepart",
"logi",
"mxkeys"
] | Hobby & Makers > Mechanical Parts | [
"696737/images/image_1_compressed.jpg"
] | [
"696737/stls/Logi_MX_Keys_Square_key.stl"
] | CC-BY | https://www.printables.com/model/696737 | data_0047.tar |
675488 | Logitech C270 Mount for Voron V0.2 | [
"c270",
"c270mount",
"logitechc270",
"voron",
"voron01",
"voron02",
"v02r1"
] | 3D Printers > Voron Parts & Upgrades | [
"675488/images/image_1_compressed.jpg",
"675488/images/image_2_compressed.jpg"
] | [
"675488/stls/Logitech C270 Mount for V0.stl"
] | CC-BY | https://www.printables.com/model/675488 | data_0047.tar | |
649317 | Loki TVA Coaster | <p>Now that Loki is over, all that's left to do is have a drink with Mobius. So let's protect those hardwood tables with some TVA coasters!</p><p>Change filament color above 2mm. Happy printing for all time, always!</p> | [
"marvel",
"coaster",
"drinkcoaster",
"loki",
"tva"
] | Art & Design > 2D Plates & Logos | [
"649317/images/image_1_compressed.jpg"
] | [
"649317/stls/Loki-TVACoaster.stl"
] | CC-BY | https://www.printables.com/model/649317 | data_0047.tar |
697596 | Long Handle Plastic Scraper | <p>Long Handle, improved attack angle and chamfers for ergonomics. Speed holes for speed.<br><br>Print it on its side as the STL is oriented, doesn't need supports.</p><p>Fusion360 project included.</p> | [
"handle",
"blade",
"fusion360",
"scraper"
] | Hobby & Makers > Tools | [
"697596/images/image_1_compressed.jpg",
"697596/images/image_2_compressed.jpg"
] | [
"697596/stls/Long Handle Plastic Scraper.stl"
] | CC-BY | https://www.printables.com/model/697596 | data_0047.tar |
688892 | Lounge Chair | [
"mini",
"furniture",
"miniature",
"dollhouse",
"house",
"outdoor",
"pool",
"dollhousefurniture",
"minifurniture",
"loungechair",
"lounge",
"miniaturefurniture",
"poolchair"
] | Tabletop Miniatures > Props & Terrains | [
"688892/images/image_1_compressed.jpg"
] | [
"688892/stls/Lounge Chair.stl"
] | CC-BY | https://www.printables.com/model/688892 | data_0047.tar | |
720262 | low poly pig V1 | [
"toy",
"statue",
"lowpoly",
"animal",
"low",
"poly",
"pig",
"kids",
"easy",
"blender",
"dekorace",
"socha",
"prase"
] | Household > Home Decor | [
"720262/images/image_1_compressed.jpg"
] | [
"720262/stls/low poly pig v1.stl"
] | CC0 | https://www.printables.com/model/720262 | data_0047.tar | |
662862 | LTT Pocket Screwdriver @ Home 1/4" | <p>Are you sad you can't take your LTT screwdriver with you because it is too big for your pocket?</p><p>Are you Linus and you need a smaller screwdriver for your tiny hands? (no offence babygirl, I still love you)</p><p>With LTT Pocket Screwdriver @ Home, anything is possible.</p> | [
"screwdriver",
"edc",
"ltt",
"lttstore",
"lttscrewdriver",
"pocketscrewdriver",
"lttwaterbottle",
"lttbits"
] | Hobby & Makers > Tools | [
"662862/images/image_1_compressed.jpg"
] | [
"662862/stls/Pocket LTT Screwdriver @ Home.stl"
] | GPL2.0 | https://www.printables.com/model/662862 | data_0047.tar |
752968 | Luces techo Landy mini | <p>Imprimir sin soportes</p> | [
"3dsets",
"landy",
"landymini",
"landy4x4"
] | Hobby & Makers > RC & Robotics | [
"752968/images/image_1_compressed.jpg",
"752968/images/image_2_compressed.jpg",
"752968/images/image_3_compressed.jpg",
"752968/images/image_4_compressed.jpg"
] | [
"752968/stls/bombilla.stl",
"752968/stls/foco.stl",
"752968/stls/luces techo.stl"
] | CC-BY | https://www.printables.com/model/752968 | data_0047.tar |
691136 | Lunii Flam - Coque de protection- TPU case | <p>Coque en TPU pour protéger la boite à histoire lunii flam</p><p>Imprimer à 50MM/s à plat avec support.</p><p>Le retrait des supports nécessite un peu de temps.</p><p> </p><p>TPU case to protect the Lunii Flam story box</p><p>Print at 50MM/s flat with support.</p><p>Removing the supports may take some time."</p> | [] | Gadgets > Portable Devices | [
"691136/images/image_1_compressed.jpg"
] | [
"691136/stls/coqueLuniiFlam.stl"
] | CC0 | https://www.printables.com/model/691136 | data_0047.tar |
751077 | M-LOK handguard for Mosquito V2 airsoft kit | <p>Please message me if you have any issues with models, I have not tested after I made some modifications.<br>Should fit without modification to Mosquito base.<br>Hop adjustment screw needs to be replaced by </p><p>Some components needed:</p><ul><li>3x M3x5-6 socket cap screw</li><li>3x M3 nut</li><li>1x M3x8 sel... | [
"mosquito",
"airsoft",
"mlok",
"handguard"
] | Sports & Outdoor > Outdoor Sports | [
"751077/images/image_1_compressed.jpg",
"751077/images/image_2_compressed.jpg",
"751077/images/image_3_compressed.jpg",
"751077/images/image_4_compressed.jpg",
"751077/images/image_5_compressed.jpg"
] | [
"751077/stls/FrontHandguard.stl",
"751077/stls/FrontRail.stl",
"751077/stls/HopTopCover.stl",
"751077/stls/HopWheel.stl"
] | GPL3.0 | https://www.printables.com/model/751077 | data_0047.tar |
701632 | M12 Battery Foot | <p>the original was very loose, decided to rescale and reprint.</p><p>now it is pressure fit. No need for glue or tape. however I wanted mine to be Permanente so I added a few dabs of super glue. </p><p>If printing original, change to these dimensions <br>x=62.04mm(94% of original)<br>y=76.85mm(94% of origina... | [
"m12",
"packout",
"milwaukeem12",
"milwaukkee"
] | Household > Garage | [
"701632/images/image_1_compressed.jpg",
"701632/images/image_2_compressed.jpg",
"701632/images/image_3_compressed.jpg"
] | [
"701632/stls/M12 battery Foot94.stl"
] | CC-BY | https://www.printables.com/model/701632 | data_0047.tar |
712351 | M2 ssd gridifinity bin | [
"ssd",
"gridfinity"
] | Gadgets > Computers | [
"712351/images/image_1_compressed.jpg",
"712351/images/image_2_compressed.jpg",
"712351/images/image_3_compressed.jpg"
] | [
"712351/stls/m2 ssd gridfinity v1.stl"
] | CC-BY | https://www.printables.com/model/712351 | data_0047.tar | |
691701 | M3nEs T-Nut with shrapnel spring | <p>Needed additional t-nuts to fit add-ons to my XL frame. M3 versions are not available anywhere, so I designed my own.</p><p>Printed with 0.4 nozzle and 3 perimeters. M3, 5mm, threaded insert added for strength. </p> | [] | 3D Printers > Prusa Parts & Upgrades | [
"691701/images/image_1_compressed.jpg",
"691701/images/image_2_compressed.jpg"
] | [
"691701/stls/M3-Tnut v1 With Spring-2.stl",
"691701/stls/M3-Tnut v1 With Spring.stl"
] | CC0 | https://www.printables.com/model/691701 | data_0047.tar |
706950 | M4 stand | <p><br>Printed in pla.</p><p>No need for support.</p><p>15% infill.</p><p> </p> | [
"stand",
"mount",
"m4",
"airsoft",
"m4airsoft"
] | Toys & Games > Other Toys & Games | [
"706950/images/image_1_compressed.jpg",
"706950/images/image_2_compressed.jpg",
"706950/images/image_3_compressed.jpg",
"706950/images/image_4_compressed.jpg"
] | [
"706950/stls/M4.stl"
] | CC-BY | https://www.printables.com/model/706950 | data_0047.tar |
718732 | M5Stack ATOM ECHO Multiboard Mount+Case | [
"atom",
"m5stack",
"atomecho",
"multiboard"
] | Hobby & Makers > Organizers | [
"718732/images/image_1_compressed.jpg",
"718732/images/image_2_compressed.jpg"
] | [
"718732/stls/M5Stack-ATOM-ECHO_Multiboard.stl",
"718732/stls/M5Stack-ATOM-ECHO_Multiboard_V2.stl"
] | CC-BY | https://www.printables.com/model/718732 | data_0047.tar | |
732683 | Mac mini M1 (2023) Vesa mount | <p>I wanted to clean up the desk so created this mount which attached the machine to the back of the monitor. </p> | [
"mini",
"mac"
] | Household > Office | [
"732683/images/image_1_compressed.jpg",
"732683/images/image_2_compressed.jpg"
] | [
"732683/stls/Mac Mini Vesa Mount.stl"
] | CC0 | https://www.printables.com/model/732683 | data_0047.tar |
722293 | Mac Touch ID button box for Logitech MX Keyboard | <p>This is a DIY Apple Touch ID for Logitech MX Keyboards. Overall it is quite simple. </p><p>All you need: </p><ul><li>Apple Keyboard (Without a numpad): <a href="https://www.apple.com/shop/product/MK293LL/A">https://www.apple.com/shop/product/MK293LL/A</a><ul><li>You can pick these up used on ebay or locall... | [
"diy",
"keyboard",
"id",
"logitech",
"lightning",
"diyelectronics",
"mac",
"touch",
"lightningcable",
"fingerprint",
"fingerprintsensor",
"login",
"unlock",
"logitechmx",
"authentication",
"biometric"
] | Hobby & Makers > Electronics | [
"722293/images/image_1_compressed.jpg",
"722293/images/image_2_compressed.jpg",
"722293/images/image_3_compressed.jpg",
"722293/images/image_4_compressed.jpg",
"722293/images/image_5_compressed.jpg",
"722293/images/image_6_compressed.jpg",
"722293/images/image_7_compressed.jpg",
"722293/images/image_8... | [
"722293/stls/Keyboard_Touch_ID_Base.stl",
"722293/stls/Keyboard_Touch_ID_Button_Brace.stl",
"722293/stls/Keyboard_Touch_ID_Cover.stl"
] | GPL2.0 | https://www.printables.com/model/722293 | data_0047.tar |
668846 | Magnet Storage - Additional Sizes | <p>I included a blank top part, as I skip the step of multi color printing the text here, and use my laser engraver for that instead.</p><p>Nevertheless I included top parts, which can be painted easily in a slicer using the “fill” pait tool, like in BambuStudio for example.</p> | [
"magnet",
"storage",
"storagebox",
"blank",
"5x2",
"10x2",
"6x2",
"4x2",
"3x1",
"roundmagnet"
] | Hobby & Makers > Mechanical Parts | [
"668846/images/image_1_compressed.jpg"
] | [
"668846/stls/10x2-Base.stl",
"668846/stls/10x2-Top.stl",
"668846/stls/3x1-Base.stl",
"668846/stls/3x1-Top.stl",
"668846/stls/5x2-Base.stl",
"668846/stls/5x2-Top.stl",
"668846/stls/6x2-Base.stl",
"668846/stls/6x2-Top.stl",
"668846/stls/Blank-Top.stl"
] | CC-BY | https://www.printables.com/model/668846 | data_0047.tar |
802247 | Magnetic Sewing Fence | <p>This is a simple, magnetic sewing fence I made because I often struggled to sew a straight line. It uses a 25mm diameter by 4 mm magnet which is inserted into the print. Simply use the pause at layer height feature in the slicer to insert the magnet and resume to allow the magnet to be printed over. </p><p>This... | [
"sewing",
"sewingmachine",
"sew",
"sewingaid",
"sewingmachineparts",
"sewingtools"
] | Hobby & Makers > Tools | [
"802247/images/image_1_compressed.jpg",
"802247/images/image_2_compressed.jpg",
"802247/images/image_3_compressed.jpg"
] | [
"802247/stls/magnetic sewing fence.stl"
] | GPL2.0 | https://www.printables.com/model/802247 | data_0047.tar |
673592 | Magnets Organizer | <p>It has slots for 18mm, 15mm, 12mm, 10mm, 8mm, 6mm, 5mm and 3 mm round magnets. </p> | [] | Hobby & Makers > Tools | [
"673592/images/image_1_compressed.jpg",
"673592/images/image_2_compressed.jpg",
"673592/images/image_3_compressed.jpg"
] | [
"673592/stls/Magnet Organizer Body.stl",
"673592/stls/Magnet Prganizer Cap.stl"
] | CC-BY | https://www.printables.com/model/673592 | data_0047.tar |
793313 | Makeup Sponge Holder v2 | <p>This is version 2 of my previous makeup sponge holder. Tolerances have been adjusted and the filet has been replaced with a chamfer for easier printing. it is a simple case to store a makeup sponge for travel or to dry after washing</p> | [
"hexagon",
"holder",
"case",
"sponge",
"blender",
"beauty",
"foundation",
"makeup",
"concealer"
] | Fashion > Women | [
"793313/images/image_1_compressed.jpg"
] | [
"793313/stls/Makeup Sponge Holder - Base.stl",
"793313/stls/Makeup Sponge Holder - Lid.stl"
] | GPL3.0 | https://www.printables.com/model/793313 | data_0047.tar |
782265 | Makita DUR 181 Wall Holder | <p>Makita DUR 181 Wall Holder</p> | [
"makita"
] | Household > Outdoor & Garden | [
"782265/images/image_1_compressed.jpg"
] | [
"782265/stls/Makita DUR 181 Wall Holder.stl"
] | GPL2.0 | https://www.printables.com/model/782265 | data_0047.tar |
709126 | Mangeoire 1 boule de graisse pour oiseaux - Bird feeder 1 tallow ball | <p> </p><p>Suite à la création d'un premier modèle pouvant contenir deux boules de suif, (https://www.printables.com/fr/model/660420-mangeoire-pour-oiseaux-boule-de-graisse-bird-feede) et après de longs moments d'observation, j'ai remarqué que certains oiseaux n'arrivaient pas a rester sur la mangeoire. (par exemp... | [
"birds",
"birdfeeder",
"mangeoire",
"oiseaux",
"tallow",
"suif"
] | Household > Outdoor & Garden | [
"709126/images/image_1_compressed.jpg",
"709126/images/image_2_compressed.jpg"
] | [
"709126/stls/Corps_V12.stl",
"709126/stls/Couvercle_V12_sans_trou.stl"
] | CC-BY | https://www.printables.com/model/709126 | data_0047.tar |
739011 | Manual solder flux (paste) dispenser (extruder) - improved | [
"soldering"
] | Hobby & Makers > Electronics | [
"739011/images/image_1_compressed.jpg"
] | [
"739011/stls/Solder paste dispenser - all parts for 15mm OD tube - PLA 1hr.stl"
] | CC-BY | https://www.printables.com/model/739011 | data_0047.tar | |
795206 | Marauder CYD Case | <p>This is a case for the CYD (cheap yellow display). It's two parts with the lid snapping into the body. There's two reliefs in the back to allow for activating the buttons. There are also pins inside that hold the board in place. </p> | [] | Hobby & Makers > Electronics | [
"795206/images/image_1_compressed.jpg",
"795206/images/image_2_compressed.jpg",
"795206/images/image_3_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/795206 | data_0047.tar |
663599 | Mario Figure for Prusa Balance game | <p>I tried to make the size so that the weight is the same if you use similar infill for the dragon and mario. Needs supports.</p><p>Edit: Added a V2 for the model which makes mario better fused with the bottom pad. Also makes him bigger to be more balanced with the original dragon model.</p> | [
"prusa",
"mario",
"balance"
] | Toys & Games > Board Games | [
"663599/images/image_1_compressed.jpg"
] | [
"663599/stls/mario_balance_game.stl",
"663599/stls/mario_balance_game_v2.stl"
] | CC-BY | https://www.printables.com/model/663599 | data_0047.tar |
655326 | Master Sword Wall Mount | <p>A Hylian Shield inspired wall mount for <a href="https://www.thingiverse.com/giedzinski/designs">giedzinski's</a> Master Sword</p><p><a href="https://www.thingiverse.com/thing:5828243"><strong>MASTER Sword (No glue, assembles smooth! Because banana bread wasn't enough for you…</strong></a></p> | [
"zelda",
"link"
] | Art & Design > Wall-mounted | [
"655326/images/image_1_compressed.jpg",
"655326/images/image_2_compressed.jpg",
"655326/images/image_3_compressed.jpg"
] | [
"655326/stls/MS Mount.stl"
] | CC-BY | https://www.printables.com/model/655326 | data_0047.tar |
776590 | Measuring Spoon for Aerogarden Plant Food | <p>The Aerogardens I have call for 8mL of plant food every so often. I was using a syringe originally but wanted more of a scoop/spoon to pour the plant food into. It comes out to approximately 8mL when filled to the line inside the spoon. I left some room between the line and the top of the spoon to help avoid spillag... | [
"plant",
"hydroponics",
"plants",
"aerogarden",
"hydroponic",
"plantfood"
] | Household > Outdoor & Garden | [
"776590/images/image_1_compressed.jpg"
] | [
"776590/stls/8mL Measuring Spoon.stl"
] | CC-BY | https://www.printables.com/model/776590 | data_0047.tar |
672683 | medication&pills storage organizer box with sliding lid (3-day and 7-day versions) | <p>This a 3-day (6 compartments) or 7-day (14 compartments) storage box for pills with sliding lid for easier access. <strong>A safety cover cap was added to prevent lids from opening.</strong></p><p>Dimensions for 3-day and 7-day versions are 95 x 45 x 17 mm and 150 x 65 x 17, respectively.</p><p>Print with 0.2 mm lay... | [
"box",
"organizer",
"storage",
"medicine",
"slidinglid",
"pills",
"medication"
] | Healthcare > Medical Tools | [
"672683/images/image_1_compressed.jpg",
"672683/images/image_2_compressed.jpg",
"672683/images/image_3_compressed.jpg",
"672683/images/image_4_compressed.jpg"
] | [
"672683/stls/3&4-day_storage_box-cap.stl",
"672683/stls/3-day_storage_box-lid.stl",
"672683/stls/3-day_storage_box.stl",
"672683/stls/4-day_storage_box-lid.stl",
"672683/stls/4-day_storage_box.stl",
"672683/stls/7-day_storage_box-cap.stl",
"672683/stls/7-day_storage_box-lid.stl",
"672683/stls/7-day_st... | CC-BY | https://www.printables.com/model/672683 | data_0047.tar |
662423 | Mercedes W124 manual shifter boot frame | <p>On my Mercedes 300CE W124 was rubber boot on manual shifter. There are many aftermarket leather boots for few bucks. The issue is that original frame fastening boot does not worked for me. So I created new, more sturdy.</p><p>There are two dents in center console panel, so keep an eye on proper orientation of frame.... | [
"shifter",
"w124",
"boot"
] | Hobby & Makers > Automotive | [
"662423/images/image_1_compressed.jpg",
"662423/images/image_2_compressed.jpg",
"662423/images/image_3_compressed.jpg"
] | [
"662423/stls/shifter_boot_frame.stl"
] | CC-BY | https://www.printables.com/model/662423 | data_0047.tar |
766833 | Mermaid Lego Friends (Improved Fit & Options) | <p>I redesigned the connection to Lego Friends as below, closer to Lego spec, and added an extra bit of bed adhesion for a previously floating area. It's still not the exact Lego oval but this slot fits much better than the original, I printed tested multiple copies.</p><p><i><strong>3 fits </strong></i>available:</p><... | [
"friends",
"mermaid",
"lego",
"mermaids"
] | Toys & Games > Other Toys & Games | [
"766833/images/image_1_compressed.jpg",
"766833/images/image_2_compressed.jpg",
"766833/images/image_3_compressed.jpg",
"766833/images/image_4_compressed.jpg",
"766833/images/image_5_compressed.jpg",
"766833/images/image_6_compressed.jpg",
"766833/images/image_7_compressed.jpg"
] | [
"766833/stls/Mermaid Adjusted Loose.stl",
"766833/stls/Mermaid Adjusted Slip.stl",
"766833/stls/Mermaid Adjusted Snug.stl"
] | CC0 | https://www.printables.com/model/766833 | data_0047.tar |
789132 | Meta Quest 3 USB cable constraint | <p>These two brackets hold a right angle USB-C cable head and cord to the arm of a Meta Quest 3 headset. The intent is to constrain the rotation of the cable head and keep the cable parallel with the headset arm. The cable in the image is a 16' Kuject USB 3.0 Oculus link cable, model: OC005C</p> | [] | Gadgets > Virtual Reality | [
"789132/images/image_1_compressed.jpg",
"789132/images/image_2_compressed.jpg",
"789132/images/image_3_compressed.jpg"
] | [
"789132/stls/USB_cable_clip_5,5mm.stl",
"789132/stls/USB_head_clip.stl"
] | CC0 | https://www.printables.com/model/789132 | data_0047.tar |
794685 | Metric Modular Filament Drawer System | <p>Modular Filament Storage System based on the Design by @RCDIY_187541, modified to use Materials available in Europe, pleace check out the oritinal Model for detailed Information about this system and the Section below for what exactly changed compared to the original Design.</p><ul><li>uses GTV H45 PK-PRO Drawer sli... | [
"organizer",
"filament",
"modular",
"storage",
"drawer"
] | Hobby & Makers > Organizers | [
"794685/images/image_1_compressed.jpg",
"794685/images/image_2_compressed.jpg"
] | [
"794685/stls/faceplate.stl",
"794685/stls/frame.stl",
"794685/stls/middle_support.stl",
"794685/stls/rear_support.stl"
] | CC-BY | https://www.printables.com/model/794685 | data_0047.tar |
793554 | Metric thread testblock M3-M14 | <p>A tool to check if your printer is capable to print metric thread.</p><p>This is a remix of https://www.printables.com/model/738513-metric-thread-testblock</p><p>Thanks to the original uploader.</p> | [
"nut",
"test",
"thread",
"metric",
"block",
"threaded",
"testblock",
"threadtest"
] | 3D Printers > Test Models | [
"793554/images/image_1_compressed.jpg",
"793554/images/image_2_compressed.jpg"
] | [
"793554/stls/metric_thread_testblock_v2_M3-M14.stl"
] | CC-BY | https://www.printables.com/model/793554 | data_0047.tar |
768448 | Metroid Chozo Apple Watch Charger Stand | <p>Apple watch charge stand Chozo statue with routing for the cable and recess for your Apple Watch charger puck.</p> | [
"metroid",
"samus",
"chozo"
] | Toys & Games > Action Figures & Statues | [
"768448/images/image_1_compressed.jpg"
] | [
"768448/stls/Chozo_Apple_Watch_Charger.stl"
] | CC-BY | https://www.printables.com/model/768448 | data_0047.tar |
687785 | MG Octagon Logo Key Chain Keychain or Ornament | <p>I just thought I'd design a simple keychain with the MG brand octagon logo.</p><p>You could also hang it on your tree as a Christmas ornament.</p><p>Printed at 100% size it's 54mm.</p><p> </p><p><strong>Edit 1/28/25:</strong></p><p>I added a version that you can print flat using my <a href="https://www.printabl... | [
"keychain",
"key",
"keys",
"mgb",
"mg",
"midget",
"mga",
"mgmidget",
"mglogo"
] | Art & Design > 2D Plates & Logos | [
"687785/images/image_1_compressed.jpg",
"687785/images/image_2_compressed.jpg"
] | [
"687785/stls/MG Key Chain.stl",
"687785/stls/MG Keychain (flat).stl"
] | CC-BY | https://www.printables.com/model/687785 | data_0047.tar |
790997 | MGN12 Carriage Holder | <p>Rotate -90 on X for proper print orientation</p> | [] | 3D Printers > Accessories | [
"790997/images/image_1_compressed.jpg"
] | [
"790997/stls/MGN12CarriageHolder.stl"
] | CC-BY | https://www.printables.com/model/790997 | data_0047.tar |
703440 | Mickey Mouse Public Domain Image Lithophane | <p>On 1 January 2024, the Mickey Mouse image that includes “Steamboat Willie” entered Public Domain in the United States. This is a lithophane of Mickey as Steamboat WIllie.</p> | [
"animation",
"disney",
"mickeymouse"
] | Art & Design > 2D Plates & Logos | [
"703440/images/image_1_compressed.jpg",
"703440/images/image_2_compressed.jpg"
] | [
"703440/stls/mickey_PD.stl"
] | CC0 | https://www.printables.com/model/703440 | data_0047.tar |
702655 | MicroMacro boardgame clue markers | <p>an arrow and magnifying glass for micromacro. magnifier print at 25%</p> | [
"game",
"board",
"marker",
"boardgame",
"micromacro"
] | Toys & Games > Board Games | [
"702655/images/image_1_compressed.jpg"
] | [
"702655/stls/micromacro arrow.stl",
"702655/stls/micromacro magnifier.stl"
] | CC0 | https://www.printables.com/model/702655 | data_0047.tar |
669432 | micro:bit holder (10) | <p>Micro:bit holder, remixed to hold 10 micro:bits instead of 20.</p> | [
"microbit",
"thingiverse",
"organisation"
] | Learning > Other 3D Objects for Learning | [
"669432/images/image_1_compressed.jpg"
] | [
"669432/stls/microbit_holder_one_row.stl"
] | CC-BY | https://www.printables.com/model/669432 | data_0047.tar |
740679 | Miele Dishwasher Tray Roller C Clip | <p>Print instructions:<br> </p><ul><li>Recommend PETG or better as many dishwashers reach 75C or maybe more. PLA is probably going to be a fail.</li><li>I printed on a Prusa Mk4 with a 0.4 nozzle on 0.1mm detail with solid infil.</li></ul><p>My clip fitted perfectly in a G6100 SC UK dishwasher. It will probably fi... | [] | Household > Kitchen | [
"740679/images/image_1_compressed.jpg",
"740679/images/image_2_compressed.jpg",
"740679/images/image_3_compressed.jpg"
] | [
"740679/stls/Miele_Tray_Roller_Clip.stl"
] | CC-BY | https://www.printables.com/model/740679 | data_0047.tar |
686697 | Minecraft Lamp | <p>Print PLA, fists well</p><p>I made it for model: <a href="https://www.printables.com/cs/model/399599-minecraft-erzlampe">https://www.printables.com/cs/model/399599-minecraft-erzlampe</a></p><p>I print lamp 85% size from original model and my model is for smaller lamp!!!</p><p>For inside part is good transparent fila... | [
"light",
"lamp",
"minecraft",
"ledstrip"
] | Tabletop Miniatures > Miniature Gaming Accessories | [
"686697/images/image_1_compressed.jpg",
"686697/images/image_2_compressed.jpg",
"686697/images/image_3_compressed.jpg"
] | [
"686697/stls/Minecraft Lamp ledstrip mount.stl",
"686697/stls/Minecraft Lampe innen.stl",
"686697/stls/Minecraft Lampe v1.stl"
] | CC-BY | https://www.printables.com/model/686697 | data_0047.tar |
798286 | Mini 10:1 cycloidal gearbox | <figure class="image"><img src="https://media.printables.com/media/prints/798286/rich_content/6e10985e-c3fa-4b8c-8912-8cb0dd653e11/image.png#%7B%22uuid%22%3A%225cc03a54-00ce-42ea-a52f-c78e6b2d2c78%22%2C%22w%22%3A1231%2C%22h%22%3A681%7D"></figure><p><i>Suggestion for printing orientation</i></p> | [
"educational",
"gearbox",
"demonstration"
] | Hobby & Makers > Mechanical Parts | [
"798286/images/image_1_compressed.jpg",
"798286/images/image_2_compressed.jpg",
"798286/images/image_3_compressed.jpg"
] | [
"798286/stls/assembly - drive_disk-1.stl",
"798286/stls/assembly - Housing-1.stl",
"798286/stls/assembly - input_shaft-1.stl",
"798286/stls/assembly - key-2.stl",
"798286/stls/assembly - key-3.stl",
"798286/stls/assembly - Lid-1.stl",
"798286/stls/assembly - lock_ring-1.stl",
"798286/stls/assembly - o... | CC0 | https://www.printables.com/model/798286 | data_0047.tar |
788532 | Mini crossbow gun (print-in-place) and (fully printable) | <p>This crossbow is intended to be a fun, fast-printed toy with reasonable durability and power. I test-shot the crossbow 436 times before the 3D-printed string broke. The crossbow shoots around twenty-five feet or so depending on the angle of the projectile when launched. It is not as durable as I had hoped, so I will... | [] | Gadgets > Other Gadgets | [
"788532/images/image_1_compressed.jpg",
"788532/images/image_2_compressed.jpg",
"788532/images/image_3_compressed.jpg",
"788532/images/image_4_compressed.jpg"
] | [
"788532/stls/Bullet.stl",
"788532/stls/Crossbow.stl",
"788532/stls/Fully 3D Printed Crossbow and Bullet.stl"
] | CC-BY | https://www.printables.com/model/788532 | data_0047.tar |
694725 | Mini Finger Gardening Tools | <p>A mini finger rake, hoe, shovel and fork to use for your plants! I used a brim for the hoe and printed them all with the shaft being against the print bed.</p><p>0.2mm layer height and 20% infill.</p> | [] | Household > Outdoor & Garden | [
"694725/images/image_1_compressed.jpg",
"694725/images/image_10_compressed.jpg",
"694725/images/image_11_compressed.jpg",
"694725/images/image_12_compressed.jpg",
"694725/images/image_13_compressed.jpg",
"694725/images/image_2_compressed.jpg",
"694725/images/image_3_compressed.jpg",
"694725/images/ima... | [
"694725/stls/finger_fork.stl",
"694725/stls/finger_hoe.stl",
"694725/stls/finger_rake.stl",
"694725/stls/finger_shovel.stl"
] | CC-BY | https://www.printables.com/model/694725 | data_0047.tar |
658559 | MINI Honeycomb LCD cover R8 | <p>Got request of same honeycomb cover as the MK4 and XL to the MINI R8. Have 3 files. One with text and one without.</p><p>I must have bin tired last night and forgot to put the text in the center 😁 But i have the centered now uploaded instead as in the first picture. I also uploaded a clean cover without cutout for ... | [
"prusa",
"mini",
"lcd",
"lcdcover",
"prusamini",
"lcdscreen",
"lcdholder",
"lcdcase",
"lcddisplay"
] | 3D Printers > Prusa Parts & Upgrades | [
"658559/images/image_1_compressed.jpg",
"658559/images/image_10_compressed.jpg",
"658559/images/image_11_compressed.jpg",
"658559/images/image_12_compressed.jpg",
"658559/images/image_13_compressed.jpg",
"658559/images/image_14_compressed.jpg",
"658559/images/image_15_compressed.jpg",
"658559/images/i... | [
"658559/stls/R8 MINI Honeycomb LCD cover without cutout for text.stl",
"658559/stls/R8 MINI Honeycomb LCD cover without text.stl",
"658559/stls/R8 MINI Honeycomb LCD cover.stl",
"658559/stls/TEXT.stl"
] | GPL2.0 | https://www.printables.com/model/658559 | data_0047.tar |
781869 | Mini Iris Container | <p>The Mini Iris Container easily opens and closes with a small twist. The mechanism can be operated with a single hand. The print requires about 100 grams of PLA depending on the settings. This is a good option for desktop storage while doubling as a fidget toy.</p><figure class="image"><img src="https://media.p... | [
"hexagon",
"box",
"organizer",
"desktop",
"twist",
"container",
"fidget",
"gears",
"mechanical",
"mechanism",
"storage",
"storagebox",
"honeycomb",
"pattern",
"irisbox",
"iris",
"organizers",
"storagecontainer",
"onehanded",
"onehandedoperation"
] | Hobby & Makers > Other Ideas | [
"781869/images/image_1_compressed.jpg",
"781869/images/image_2_compressed.jpg"
] | [
"781869/stls/Bottom-Honeycomb.stl",
"781869/stls/Leaf x5.stl",
"781869/stls/Leaf.stl",
"781869/stls/Ring Gear-Honeycomb.stl",
"781869/stls/Top.stl"
] | CC-BY | https://www.printables.com/model/781869 | data_0047.tar |
734163 | Mini Lathe organizers | <p>got one of the mini lathes 7x14 from vevor on amazon an loving it so far but i didnt have much room to work with so i start looking for ways to organize the tools an cutting tools that i got for it so far an most of what ive tried downloading dont fit what i have so i took what i found an liked an remixed the ones t... | [
"allen",
"thingiverse",
"lathe",
"minilathe",
"studentchallenge"
] | Hobby & Makers > Tools | [
"734163/images/image_1_compressed.jpg",
"734163/images/image_10_compressed.jpg",
"734163/images/image_11_compressed.jpg",
"734163/images/image_12_compressed.jpg",
"734163/images/image_13_compressed.jpg",
"734163/images/image_14_compressed.jpg",
"734163/images/image_15_compressed.jpg",
"734163/images/i... | [
"734163/stls/Lathe_10mm_Tool_holder_10_v2.stl",
"734163/stls/Lathe_10mm_Tool_holder_2_v2.stl",
"734163/stls/Lathe_10mm_Tool_holder_3_v2.stl",
"734163/stls/Lathe_10mm_Tool_holder_4_v2.stl",
"734163/stls/Lathe_10mm_Tool_holder_5_v2.stl",
"734163/stls/Lathe_10mm_Tool_holder_single_v2.stl",
"734163/stls/Lat... | CC-BY | https://www.printables.com/model/734163 | data_0047.tar |
795177 | Mini Printbed Scraper - Honeycomb Pattern | [
"prusa",
"print",
"printer",
"scraper",
"printbed"
] | 3D Printers > Accessories | [
"795177/images/image_1_compressed.jpg",
"795177/images/image_2_compressed.jpg",
"795177/images/image_3_compressed.jpg",
"795177/images/image_4_compressed.jpg"
] | [
"795177/stls/Print scraper.stl"
] | CC-BY | https://www.printables.com/model/795177 | data_0047.tar | |
684575 | Mini Satsana - Better BL Touch Mounting (Ender 3 Dual 4010) | <h4>Original Model's Issues</h4><p>I really liked the original Satsana remix that Kenny did in the form of the Mini Satsana, but I found the BL Touch mount made for it functioned really poorly for me in two major areas:</p><ol><li>I found that the mount could just barely interfere with the hot-end fan which would cause... | [
"ender3",
"bltouch",
"bltouchmount",
"microswiss",
"satsana",
"dual4010"
] | 3D Printers > Creality Parts & Upgrades | [
"684575/images/image_1_compressed.jpg",
"684575/images/image_2_compressed.jpg"
] | [
"684575/stls/mS_Ender_Dual_4010_BL_1.3.stl",
"684575/stls/mS_Ender_Dual_4010_BL_ENLARGED_HOLE1.3.stl"
] | CC-BY | https://www.printables.com/model/684575 | data_0047.tar |
677100 | Mini Spool holder for mini filament keychain | <p>I made these super tiny spool holders to hold these super tiny spool swatches, cause pegboard is life.</p>
<p>Prints with no supports, and honestly could probably be used to hang tools from, but it's more fun this way.</p>
Category: Keychains | [
"organizer",
"cute",
"miniature",
"spoolholder",
"keychain",
"pegboard",
"swatch",
"thingiverse"
] | Fashion > Other Fashion Accessories | [
"677100/images/image_1_compressed.jpg",
"677100/images/image_2_compressed.jpg",
"677100/images/image_3_compressed.jpg",
"677100/images/image_4_compressed.jpg"
] | [
"677100/stls/mini_spool_holder.stl"
] | CC-BY | https://www.printables.com/model/677100 | data_0047.tar |
738030 | Mini Spoolholder PTFE Hold | <p>Stops PTFE winding into the spool. The side split allows convenient insertion of filament and PTFE after loading it into the printer.</p><p> </p><p>No support is needed. </p><p> </p> | [
"spoolholder"
] | 3D Printers > Prusa Parts & Upgrades | [
"738030/images/image_1_compressed.jpg",
"738030/images/image_2_compressed.jpg",
"738030/images/image_3_compressed.jpg"
] | [
"738030/stls/Mini Spoolholder PTFE Hold.stl",
"738030/stls/ptfe_holder.stl"
] | CC-BY | https://www.printables.com/model/738030 | data_0047.tar |
692315 | Mini Tush - for 250g spools | <p><strong>===UPDATE February 7, 2024</strong></p><p>Print Profile now available: <a href="https://makerworld.com/en/models/125891#profileId-192359"><strong>HERE</strong></a></p><p> </p><p><strong>===ORIGINAL POST</strong></p><p>Same as the regular TUSH, just shortened to work with the small 250g spools. 608 beari... | [
"holder",
"mini",
"filament",
"spoolholder",
"filamentspoolholder",
"bearing",
"608",
"608bearing",
"tush",
"thingiverse",
"250g"
] | 3D Printers > Accessories | [
"692315/images/image_1_compressed.jpg",
"692315/images/image_2_compressed.jpg",
"692315/images/image_3_compressed.jpg",
"692315/images/image_4_compressed.jpg"
] | [
"692315/stls/All files are now available on MakerWorld.stl"
] | CC-BY | https://www.printables.com/model/692315 | data_0047.tar |
797697 | Minimal Elegant Flower Earrings | <p>An elegant earring model with a floral pattern and minimal design.</p> | [
"earring",
"flower",
"fashion",
"accessory",
"rose",
"accessories",
"flowerpot",
"flowervase",
"elegant",
"fashionaccessories"
] | Fashion > Other Fashion Accessories | [
"797697/images/image_1_compressed.jpg",
"797697/images/image_2_compressed.jpg",
"797697/images/image_3_compressed.jpg",
"797697/images/image_4_compressed.jpg"
] | [
"797697/stls/earring 1.stl"
] | CC0 | https://www.printables.com/model/797697 | data_0047.tar |
669892 | Minimalist Kingroon KLP1 Lid Riser and Kick Stand | <p>The KLP-1 has an issue where the hotend whip (cable and feed tube) drag on the lid of the printer. Also, the lid doesn't have a backstop, which is mildly annoying.<br><br>There are some designs already out there to elevate the entire top of the printer, but they take a lot of plastic. This design elevates only the l... | [
"minimal",
"klp1"
] | 3D Printers > Other Printer Parts & Upgrades | [
"669892/images/image_1_compressed.jpg",
"669892/images/image_2_compressed.jpg",
"669892/images/image_3_compressed.jpg",
"669892/images/image_4_compressed.jpg",
"669892/images/image_5_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/669892 | data_0047.tar |
704118 | Miter Box 45/90 | <p>Woodworking miter saw box with pressure wedge</p> | [
"woodwork",
"woodworking",
"tools",
"mitersaw",
"woodworkingtools",
"miterbox",
"miter"
] | Hobby & Makers > Tools | [
"704118/images/image_1_compressed.jpg",
"704118/images/image_2_compressed.jpg",
"704118/images/image_3_compressed.jpg"
] | [
"704118/stls/KLINMB.stl",
"704118/stls/MITER BOX.stl"
] | CC-BY | https://www.printables.com/model/704118 | data_0047.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.