model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
693587 | Slim Balance tetrix box | <p>Box and lid with 3 mm walls, and 2 mm bottoms and sides, reduces the material from about 600 grams to about 300 grams, with the same measures of heights, and clearances as the original for the pieces, but the piece measures 26 mm less in length, and 16 mm in width. </p><p>This model is for the box only, y... | [] | Toys & Games > Building Toys | [
"693587/images/image_1_compressed.jpg",
"693587/images/image_2_compressed.jpg",
"693587/images/image_3_compressed.jpg",
"693587/images/image_4_compressed.jpg",
"693587/images/image_5_compressed.jpg",
"693587/images/image_6_compressed.jpg"
] | [
"693587/stls/4011_Slim_Case Bottom.stl",
"693587/stls/4011_Slim_Case Top.stl"
] | CC0 | https://www.printables.com/model/693587 | data_0048.tar |
316477 | Slim SD Card Organizers | <p>Slim SD Card organizers to hold 4 (2x2) or 6 (2x3) SD Cards</p><p>These are designed for a 0.2mm layer height. </p><p>Printed in PLA.</p> | [
"sdcard",
"sdcardholder"
] | Hobby & Makers > Organizers | [
"316477/images/image_1_compressed.jpg",
"316477/images/image_2_compressed.jpg",
"316477/images/image_3_compressed.jpg"
] | [
"316477/stls/Slim SD Card Holder - Thin Slot 2x3.stl",
"316477/stls/Slim SD Card Holder - Wide Slot 2x2.stl"
] | CC-BY | https://www.printables.com/model/316477 | data_0048.tar |
406598 | Slim snap-fit case for Raspberry Pi Zero W2 with headers | <p>This case is a remix of <a href="https://www.printables.com/social/109235-dimo414/about">dimo414</a>'s <a href="https://www.printables.com/model/119294-slim-raspberry-pi-zero-w2-snap-fit-case">Slim Raspberry Pi Zero W2 Snap-fit Case</a>. That was a remix of<a href="https://www.printables.com/social/21719-mariu... | [
"case",
"snapfit",
"raspberrypi",
"raspberrypicase",
"rpi",
"slim",
"blenderfile",
"madewithblender"
] | Gadgets > Computers | [
"406598/images/image_1_compressed.jpg",
"406598/images/image_2_compressed.jpg",
"406598/images/image_3_compressed.jpg",
"406598/images/image_4_compressed.jpg",
"406598/images/image_5_compressed.jpg",
"406598/images/image_6_compressed.jpg"
] | [
"406598/stls/pi-zero-w2-snap_headers_bottom.stl",
"406598/stls/pi-zero-w2-snap_headers_top.stl"
] | CC-BY | https://www.printables.com/model/406598 | data_0048.tar |
43547 | Slim webcam cover | <p>A remix for dimensional adjustment. It fits an Dell 5580 laptop.<br/>
Overall dimensions : 38 x 16 mm, 1 mm thick.</p>
<h3>Print instructions</h3><h3>Category: Computer Summary</h3>
<p>A remix for dimensional adjustment. It fits an Dell 5580 laptop.<br/>
Overall dimensions : 38 x 16 mm, 1 mm thick.</p>
<h3> Print ... | [
"thingiverse",
"webcamcover",
"cameracover",
"laptopcameraprivacy"
] | Gadgets > Computers | [
"43547/images/image_1_compressed.jpg",
"43547/images/image_2_compressed.jpg",
"43547/images/image_3_compressed.jpg"
] | [
"43547/stls/glissiere.stl",
"43547/stls/volet.stl"
] | CC-BY | https://www.printables.com/model/43547 | data_0048.tar |
432104 | Slim X Endstop - Ender 3 V2 Neo | <p><strong>Slim Adjustable X Endstop Limit Switch</strong> for the <strong>Ender 3 V2 Neo</strong><br><br>Increases visibility and access to the X axis belt for checking alignment and shimming.<br>Frees up one mounting point for other uses.</p><p><strong>Position A</strong> : Original <br><strong>Position B</stron... | [
"switch",
"creality",
"ender",
"v2",
"adjustable",
"3",
"endstop",
"limit",
"neo",
"sprite",
"slim"
] | 3D Printers > Creality Parts & Upgrades | [
"432104/images/image_1_compressed.jpg",
"432104/images/image_2_compressed.jpg",
"432104/images/image_3_compressed.jpg"
] | [
"432104/stls/X Adjustable EndStop.stl"
] | CC-BY | https://www.printables.com/model/432104 | data_0048.tar |
754094 | Slimbox/hitbox - low profile fightstick with a screen | <p>As I'm posting it as a remix I won't add much more here. If you have any questions feel free to ask I'll be happy to answer. </p><p>To fix a screen to the case you just line up displlay and then melt plastic pins with a soldering iron. Low profile, no screws needed.</p><p>Thing You'll need:</p><p>- 14x Kailh Ch... | [
"stick",
"mortalkombat",
"fighting",
"hitbox",
"slimbox",
"tekken"
] | Gadgets > Video Games | [
"754094/images/image_1_compressed.jpg",
"754094/images/image_10_compressed.jpg",
"754094/images/image_2_compressed.jpg",
"754094/images/image_3_compressed.jpg",
"754094/images/image_4_compressed.jpg",
"754094/images/image_5_compressed.jpg",
"754094/images/image_6_compressed.jpg",
"754094/images/image_... | [
"754094/stls/kailhkeycapbig_byG.stl",
"754094/stls/kailhkeycapsmall_byG.stl",
"754094/stls/kailhkeycap_byG.stl",
"754094/stls/slimbox_bottom.stl",
"754094/stls/slimbox_top.stl"
] | CC-BY | https://www.printables.com/model/754094 | data_0048.tar |
246195 | Slinky Chainmail Fabric | <p>Who needs sheep, silkworms, cotton or synthetic threads? This surprisingly flexible cloth springs ready-spun from the bed of your 3D printer, set to coaster your cup, insulate your ice cream bowl or, as shown here, enwrap a cute animal toy.</p> | [
"fabric",
"chainmail",
"textile",
"cloth",
"weave"
] | Art & Design > Other Art & Designs | [
"246195/images/image_1_compressed.jpg",
"246195/images/image_2_compressed.jpg",
"246195/images/image_3_compressed.jpg",
"246195/images/image_4_compressed.jpg"
] | [
"246195/stls/Slinky Chainmail 12x12.stl",
"246195/stls/Slinky Chainmail 6x6.stl",
"246195/stls/Slinky Chainmail x1.stl"
] | CC-BY | https://www.printables.com/model/246195 | data_0048.tar |
154256 | Slip on Knights Helmet for lucky 13 | <p>should print as a loose fit so the helmet can be slipped on or off a posed lucky13 without having to wrench off the head.</p> | [] | Toys & Games > Action Figures & Statues | [
"154256/images/image_1_compressed.jpg",
"154256/images/image_2_compressed.jpg"
] | [
"154256/stls/Deus Vult13 v3.stl"
] | CC-BY | https://www.printables.com/model/154256 | data_0048.tar |
80976 | Sliping puzzle Halloween | [
"halloween",
"puzzle",
"halloweenpumpkin"
] | Toys & Games > Puzzles & Brain-teasers | [
"80976/images/image_1_compressed.jpg"
] | [
"80976/stls/slipingpuzzlehalloween.stl"
] | CC0 | https://www.printables.com/model/80976 | data_0048.tar | |
468912 | Slippery When Wet Floor Signs | <figure class="media"><oembed url="https://youtu.be/LUV9tNnnPLQ"></oembed></figure><p>Simple print-in-place and no supports needed. Combine with graphics or stickers if desired! <br><br> </p><p>See my other models for more miniatures! </p> | [
"sign",
"banana",
"slippery"
] | Tabletop Miniatures > Props & Terrains | [
"468912/images/image_1_compressed.jpg",
"468912/images/image_2_compressed.jpg",
"468912/images/image_3_compressed.jpg"
] | [
"468912/stls/banana.stl",
"468912/stls/folding wet sign 3 text.stl",
"468912/stls/folding wet sign 3.stl",
"468912/stls/folding wet sign text.stl",
"468912/stls/folding wet sign.stl"
] | CC-BY | https://www.printables.com/model/468912 | data_0048.tar |
1273198 | Sloth | [
"sloth"
] | World & Scans > Animals | [
"1273198/images/image_1_compressed.jpg"
] | [
"1273198/stls/Sloth.stl"
] | CC0 | https://www.printables.com/model/1273198 | data_0048.tar | |
181773 | Slotted Ceiling Hook |
<p>Added an open slot to Gazorpa's very handy Super Strong Ceiling Hook.</p>
<p>Obviously, not as strong as the original but it works for my intended use of mounting a spring on a cheap screen door.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><... | [
"spring",
"thingiverse",
"ceilingmount"
] | Household > Other House Equipment | [
"181773/images/image_1_compressed.jpg",
"181773/images/image_2_compressed.jpg",
"181773/images/image_3_compressed.jpg"
] | [
"181773/stls/Ceiling_Hook_Slotted.stl"
] | CC-BY | https://www.printables.com/model/181773 | data_0048.tar |
128089 | Slotted Crayon Box | <p>I designed this to replace a worn-out cardboard crayon box, at my wife's request. It's internally ribbed to keep each crayon in its own slot as opposed to falling over into adjacent slots. The crayons around our house fit loosely enough, but there are push-through holes in the bottom just in case a short crayon ever... | [
"box",
"lid",
"bin",
"crayon"
] | Hobby & Makers > Organizers | [
"128089/images/image_1_compressed.jpg",
"128089/images/image_2_compressed.jpg",
"128089/images/image_3_compressed.jpg",
"128089/images/image_4_compressed.jpg"
] | [
"128089/stls/38cal-crayon-box-lid-unlabeled.stl",
"128089/stls/crayon-box-lid.stl",
"128089/stls/crayon-box.stl"
] | BSD | https://www.printables.com/model/128089 | data_0048.tar |
981179 | Slotted Mechanical Seven-Segment Display | <p>This is a demonstration model of a mechanical seven segment numeric display.<br> </p><figure class="media"><oembed url="https://youtu.be/mXDjVp_-l-4"></oembed></figure><p><br>Background and full build instructions are available at:</p><p><a href="https://keveney.com/posts/slotted-mechanical-seven-segment-displa... | [
"mechanical",
"mechanicaltoy",
"engineering",
"sevensegment",
"sevensegmentdisplay"
] | Learning > Engineering | [
"981179/images/image_1_compressed.jpg"
] | [
"981179/stls/back.stl",
"981179/stls/bottom.stl",
"981179/stls/camA.stl",
"981179/stls/camB.stl",
"981179/stls/camC.stl",
"981179/stls/camD.stl",
"981179/stls/camE.stl",
"981179/stls/camF.stl",
"981179/stls/camG.stl",
"981179/stls/camshaft.stl",
"981179/stls/detent-spring.stl",
"981179/stls/de... | BSD | https://www.printables.com/model/981179 | data_0048.tar |
511432 | Small & Simple Tape Dispenser | <p>I designed this <strong>Small & Simple Tape Dispenser</strong> in SOLIDWORKS for the Printables Tape Organizers and Dispensers contest (23/06/2023).</p><p>It's an easy print, without supports, already orientated correctly, in STEP & STL & 3DM files.</p><p>No additional components are required.</p><ul><li... | [
"organizer",
"holder",
"workshop",
"tools",
"tape",
"dispenser",
"tapeholder",
"tapedispenser"
] | Hobby & Makers > Tools | [
"511432/images/image_1_compressed.jpg",
"511432/images/image_10_compressed.jpg",
"511432/images/image_11_compressed.jpg",
"511432/images/image_12_compressed.jpg",
"511432/images/image_2_compressed.jpg",
"511432/images/image_3_compressed.jpg",
"511432/images/image_4_compressed.jpg",
"511432/images/imag... | [
"511432/stls/Dobble Tape Dispenser.stl",
"511432/stls/Quadro Tape Dispenser.stl",
"511432/stls/Small & Simple Tape Dispenser.stl"
] | GPL2.0 | https://www.printables.com/model/511432 | data_0048.tar |
204969 | Small 2-piece Filament Spool |
<p>EDIT: Decided to make a couple of improvements: I shaved the outer 2mm off the entire spool to use less plastic, and added filament anchors along both inner & outer edges. There are now 3 anchors on the inner edge of differing angles to give you options, and 5 outer rim anchors for tying up the loose end. Als... | [
"thingiverse"
] | 3D Printers > Accessories | [
"204969/images/image_1_compressed.jpg",
"204969/images/image_2_compressed.jpg",
"204969/images/image_3_compressed.jpg",
"204969/images/image_4_compressed.jpg",
"204969/images/image_5_compressed.jpg",
"204969/images/image_6_compressed.jpg"
] | [
"204969/stls/Small_Holey_Spool_-_Female.stl",
"204969/stls/Small_Holey_Spool_-_Male.stl",
"204969/stls/small_spool_female_thick.stl",
"204969/stls/small_spool_male_thick.stl"
] | CC-BY | https://www.printables.com/model/204969 | data_0048.tar |
691240 | Small 90 degree shelf bracket | <p>Simple 90 degree shelf bracket. 105mm long. Complete with angled screwdriver holes to you can get to screw the screw in! PZ6 screws will fit through the ‘screwdriver’ holes, bigger than that, place into the holes before putting the screwdriver through.</p><p> </p><p>3+ walls, infill dependant on how much weight... | [
"shelf",
"bracket",
"degree"
] | Household > Other House Equipment | [
"691240/images/image_1_compressed.jpg",
"691240/images/image_2_compressed.jpg"
] | [
"691240/stls/Shelf Bracket.stl"
] | CC-BY | https://www.printables.com/model/691240 | data_0048.tar |
564146 | Small and simple Factory Model - Miniature | A small model of a factory I created.
Printed on Bambulab X1 Carbon with Extrudr NX2 Filament | Download free 3D printable STL models | [
"decoration",
"miniature",
"model",
"industry",
"factory",
"industrial"
] | Art & Design > Other Art & Designs | [
"564146/images/image_1_compressed.jpg",
"564146/images/image_2_compressed.jpg",
"564146/images/image_3_compressed.jpg"
] | [
"564146/stls/Baum.stl",
"564146/stls/Fabrik.stl"
] | CC0 | https://www.printables.com/model/564146 | data_0048.tar |
440392 | Small angle | Small angle | Download free 3D printable STL models | [
"angle",
"tools",
"measuringtool"
] | Hobby & Makers > Tools | [
"440392/images/image_1_compressed.jpg"
] | [
"440392/stls/Small angle.stl"
] | CC-BY | https://www.printables.com/model/440392 | data_0048.tar |
517483 | Small Ant Nest with Swappable Connections | <p>Hello! I designed this small ant nest with the ability to use it either standing up or laying down in mind. There are 2 entrances that use a screw-in system to easily connect to other things.</p><p>It uses 3mm bolts at 20mm long. Or 19mm if not using washers.</p><p>There's a small opening at the side for inserting a... | [
"ant",
"ants",
"formicarium",
"antfarm",
"antnest",
"antsfarm",
"antsnest"
] | Household > Pets | [
"517483/images/image_1_compressed.jpg",
"517483/images/image_10_compressed.jpg",
"517483/images/image_2_compressed.jpg",
"517483/images/image_3_compressed.jpg",
"517483/images/image_4_compressed.jpg",
"517483/images/image_5_compressed.jpg",
"517483/images/image_6_compressed.jpg",
"517483/images/image_... | [
"517483/stls/10mm Adapter.stl",
"517483/stls/16mm Adapter (untested).stl",
"517483/stls/Cap Adapter.stl",
"517483/stls/Clear Acrylic Template.stl",
"517483/stls/Light Cover (No Tab).stl",
"517483/stls/Light Cover.stl",
"517483/stls/Outer Housing.stl",
"517483/stls/Screw-In Adapter Template.stl",
"51... | CC-BY | https://www.printables.com/model/517483 | data_0048.tar |
362250 | Small Bed Level Test | <p>Test just a small section of the bed, or set these in various places on the bed. These are used for calibrating the z height setting. I use a piece of paper to get close, then print one of these to get final calibration done.</p> | [
"calibration",
"bedlevel",
"leveltest",
"zheight",
"manuallevel"
] | 3D Printers > Test Models | [
"362250/images/image_1_compressed.jpg",
"362250/images/image_2_compressed.jpg",
"362250/images/image_3_compressed.jpg"
] | [
"362250/stls/Small Bed Level Test.stl"
] | CC0 | https://www.printables.com/model/362250 | data_0048.tar |
413268 | Small box with lid - 45 degree fix | <p>5cm x 6cm x 3 cm box. The original file I used had sharp drop offs (parts of print with no material underneath). I made sure that all parts of this print had at least a 45 degree build up. added 3 different hole types.<br><br><strong>### Note:</strong></p><p>If box lid isn't tight, print lid at 101%</p><p>Category: ... | [
"hexagon",
"parametric",
"box",
"container",
"crate",
"storage",
"storagebox",
"thingiverse",
"smallpartsstorage",
"square",
"rosary"
] | Household > Other House Equipment | [
"413268/images/image_1_compressed.jpg",
"413268/images/image_2_compressed.jpg"
] | [
"413268/stls/boxlid_doublehex.stl",
"413268/stls/boxlid_doublesquare.stl",
"413268/stls/boxlid_solid.stl",
"413268/stls/boxlid_square.stl",
"413268/stls/boxshell_doublehex.stl",
"413268/stls/boxshell_doublesquare.stl",
"413268/stls/boxshell_solid.stl",
"413268/stls/boxshell_square.stl"
] | CC-BY | https://www.printables.com/model/413268 | data_0048.tar |
55974 | Small Cable Organizer for Power Supplies with Euro-Plug | <p>Are you tired of the frustration that comes with tangled power supply cables? Look no further! This small cable organizer is the perfect solution to keep your power supply cables neatly organized and easily accessible. Designed specifically for power supplies with a Euro-plug, it offers a compact and efficient stora... | [
"powersupply",
"cablemanagement",
"cableorganizer",
"convenient",
"europlug",
"tanglefree",
"europeanplug",
"easyaccess"
] | Hobby & Makers > Organizers | [
"55974/images/image_1_compressed.jpg",
"55974/images/image_2_compressed.jpg"
] | [
"55974/stls/plugorganizer_v3.stl"
] | CC-BY | https://www.printables.com/model/55974 | data_0048.tar |
20248 | Small Can for Steam Iron Water | <p>This is a small water can that I designed as a more functional replacement part for refilling the steam iron without spilling water.<br>I made it, it works and fills the steam iron nice and slowly, as it should.</p><p>Of course you can use this thing for other purposes, too.</p> | [
"water",
"can",
"iron",
"steam",
"thingiverse"
] | Household > Other House Equipment | [
"20248/images/image_1_compressed.jpg",
"20248/images/image_2_compressed.jpg"
] | [
"20248/stls/water_can v2.stl"
] | GPL3.0 | https://www.printables.com/model/20248 | data_0048.tar |
302939 | Small cat tin lid | [] | Household > Pets | [
"302939/images/image_1_compressed.jpg",
"302939/images/image_2_compressed.jpg"
] | [
"302939/stls/cat food lid.stl"
] | CC0 | https://www.printables.com/model/302939 | data_0048.tar | |
349849 | Small Collection of Geometric Figures | <p>Printed as flat surfaces with connected segments that can be built up into three-dimensional geometric figures.</p><p>Construction of the hinge is shown in the picture.</p><p>I wish a lot of fun with the model and good luck with the reconstruction!</p><p> </p><p><strong>Print Details:</strong></p><p>Nozzle diam... | [
"cube",
"dodecahedron",
"tetrahedron",
"connected"
] | Learning > Math | [
"349849/images/image_1_compressed.jpg",
"349849/images/image_2_compressed.jpg",
"349849/images/image_3_compressed.jpg"
] | [
"349849/stls/cube.stl",
"349849/stls/dodecahedron.stl",
"349849/stls/tetrahedron.stl"
] | CC0 | https://www.printables.com/model/349849 | data_0048.tar |
353748 | Small cup - 40mm diameter | <p>This is my first 3d project, I've learned how to prepare a design for vase mode.</p>
<p>Dim: 40mm x 40mm x 40mm</p>
<h3>Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>SnapMaker 2.0</p>
<p class="detail-setting rafts"><strong>Rafts: </strong>
<div><p>Doesn't Matter</p></div>
<p><strong>Supports:</strong></p>... | [
"vase",
"cup",
"container",
"small",
"vasemode",
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"353748/images/image_1_compressed.jpg",
"353748/images/image_2_compressed.jpg",
"353748/images/image_3_compressed.jpg"
] | [
"353748/stls/small_vase.stl"
] | CC-BY | https://www.printables.com/model/353748 | data_0048.tar |
1374338 | Small Fastener Organizer | <p>In the process of assembling the CORE One Kit, I needed a good organizer for all the screws to prevent from needing to look in each of the small bags each time. Instead of printing a specific tray and throwing it away, I modified <a href="https://www.printables.com/@PetrBojar">@PetrBojar</a>'s customizable org... | [
"prusa",
"organizer",
"assembly",
"tray",
"screw",
"fastener",
"smallpartsorganizer",
"coreone"
] | 3D Printers > Prusa Parts & Upgrades | [
"1374338/images/image_1_compressed.jpg",
"1374338/images/image_2_compressed.jpg"
] | [
"1374338/stls/small_fastener_organizer.stl"
] | CC0 | https://www.printables.com/model/1374338 | data_0048.tar |
1588734 | Small Fidget Star - Stick Handle Remix | <p>My partner, an elementary school teacher, had a student request one of the fidget stars from TikTok with the little stick handle. My problem was that the ones with the stick handle were much too big. I found the original of this model and decided it was the perfect size so I added a stick handle to it as to match my... | [
"toy",
"star",
"fidget",
"fractal",
"amusement"
] | Toys & Games > Other Toys & Games | [
"1588734/images/image_1_compressed.jpg",
"1588734/images/image_2_compressed.jpg",
"1588734/images/image_3_compressed.jpg"
] | [
"1588734/stls/Star Fidget (Stick Remix) V2.stl"
] | CC0 | https://www.printables.com/model/1588734 | data_0048.tar |
389152 | Small Filament Cutting Helper | <p>This tool helps you cut 3D printer filament at a 45 degree angle, so it is easier to insert filament into your 3d printer. It is designed to be small and easy to print without supports, so it uses less plastic and takes a short amount of time to print.</p><p>As demonstrated in the pictures above, you push filament t... | [] | 3D Printers > Accessories | [
"389152/images/image_1_compressed.jpg",
"389152/images/image_2_compressed.jpg",
"389152/images/image_3_compressed.jpg",
"389152/images/image_4_compressed.jpg"
] | [
"389152/stls/FilamentCutter45degrees v1.stl"
] | CC0 | https://www.printables.com/model/389152 | data_0048.tar |
448747 | Small Gas Meter Key (8mm) | <p>A compact gas meter cabinet key with hole for keyring attachment. (By 8mm, I mean the width of the triangle key on the cabinet, from a point to the opposite flat side.)</p><p>I found a couple of other, similar, designs but they were slightly too large and wanted to do my own take that fit my needs and also included ... | [
"keychain",
"key",
"keyring",
"compact",
"utility",
"gasmeter"
] | Household > Outdoor & Garden | [
"448747/images/image_1_compressed.jpg",
"448747/images/image_2_compressed.jpg"
] | [
"448747/stls/Gas Meter Key 8mm.stl"
] | CC-BY | https://www.printables.com/model/448747 | data_0048.tar |
107933 | small hanging angel | <p>I needed a little angel to hang. So I created a quick model of a little angel with a loop in Fusion 360. Printed on Anycubic Mega S from white PETG by filamentPM.</p> | [
"angel"
] | Seasonal designs > Winter & Christmas & New Year's | [
"107933/images/image_1_compressed.jpg"
] | [
"107933/stls/Angel.stl"
] | CC-BY | https://www.printables.com/model/107933 | data_0048.tar |
474588 | Small Helical Gear Fidget Toy | <p>Latest version at</p><p>https://www.printables.com/model/445635-helical-gear-figdet-toy.</p><p>Littler sibling to <a href="https://www.thingiverse.com/thing:1887004">http://www.thingiverse.com/thing:1887004</a>.</p><p>BOM:</p><p>2x Housing 1</p><p>2x Housing 2</p><p>2x Gear</p><p>4x 5mm-6mm long pieces of filament</... | [
"fidget",
"fidgettoy",
"thingiverse",
"helicalgear"
] | Toys & Games > Other Toys & Games | [
"474588/images/image_1_compressed.jpg",
"474588/images/image_2_compressed.jpg",
"474588/images/image_3_compressed.jpg",
"474588/images/image_4_compressed.jpg",
"474588/images/image_5_compressed.jpg",
"474588/images/image_6_compressed.jpg"
] | [
"474588/stls/Cylinder.stl",
"474588/stls/GearLH.stl",
"474588/stls/GearLH00.stl",
"474588/stls/GearLH01.stl",
"474588/stls/GearRH.stl",
"474588/stls/GearRH00.stl",
"474588/stls/GearRH01.stl",
"474588/stls/Housing 1-180.stl",
"474588/stls/Housing 1-90.stl",
"474588/stls/Housing 2-180.stl",
"47458... | CC0 | https://www.printables.com/model/474588 | data_0048.tar |
508214 | Small Hexagon Pattern Shelf | <p>Just a small hexagon pattern shelf.</p><p>Dimensions (roughly): 17cm x 6cm x 6cm</p><p> </p><p>Personally I printed it in 0.28 layer height, 4 walls, 20% infill. It holds perfectly small bluetooth speaker.</p> | [
"shelf",
"hexagon",
"small",
"hexa"
] | Household > Home Decor | [
"508214/images/image_1_compressed.jpg",
"508214/images/image_2_compressed.jpg"
] | [
"508214/stls/shelf.stl"
] | CC-BY | https://www.printables.com/model/508214 | data_0048.tar |
985928 | Small Hexagon Tray | <p>I designed this to keep small and important items in one place on my desk. I can be scaled up and down if you need to. Feel free to remix it as much as you like. </p> | [] | Hobby & Makers > Organizers | [
"985928/images/image_1_compressed.jpg",
"985928/images/image_2_compressed.jpg"
] | [
"985928/stls/Small Hexagon Tray.stl"
] | CC0 | https://www.printables.com/model/985928 | data_0048.tar |
1006476 | Small item counting tray with funnel | <p>A variation on my earlier pill sorter, now designed for unsupported printing. </p><p>A flat tray for pills or small hardware sloped to spill into a holding area that can be funneled into a bottle or other container. The sides of the tray are sloped for easy removal of the items not in the pour area.</p><p>Print... | [
"smallpartstray",
"pillsort",
"hardwareorganization"
] | Hobby & Makers > Organizers | [
"1006476/images/image_1_compressed.jpg",
"1006476/images/image_2_compressed.jpg",
"1006476/images/image_3_compressed.jpg",
"1006476/images/image_4_compressed.jpg",
"1006476/images/image_5_compressed.jpg"
] | [
"1006476/stls/Pill Sort - Full.stl",
"1006476/stls/Pill Sort - Thin.stl"
] | CC-BY | https://www.printables.com/model/1006476 | data_0048.tar |
839632 | Small jar with lid | [] | 3D Printers > Accessories | [
"839632/images/image_1_compressed.jpg"
] | [
"839632/stls/Jar with lid (1).stl"
] | CC0 | https://www.printables.com/model/839632 | data_0048.tar | |
141175 | Small Key - The Legend of Zelda - Ocarina of Time |
<p>Basic model of the small dungeon key from Ocarina of Time.</p>
<p>Will update once I get a chance to run it through my printer</p>
<p>Added a second model which is smaller and added a keyring.</p>
Category: Video Games
| [
"small",
"zelda",
"key",
"ocarina",
"thingiverse",
"legendofzelda",
"ocarinaoftime",
"oot",
"smallkey"
] | Gadgets > Other Gadgets | [
"141175/images/image_1_compressed.jpg",
"141175/images/image_2_compressed.jpg",
"141175/images/image_3_compressed.jpg"
] | [
"141175/stls/OoT_Key_-_smaller_keyring_added.stl",
"141175/stls/Zelda_OoT_Small_Key.stl"
] | CC-BY | https://www.printables.com/model/141175 | data_0048.tar |
849773 | small Micro SD storage pendant | <p>I needed a storage for a few (1-2) Micro-SD cards, so I made this little pendant. The fuzzy skin masks the seam well. Get some thread/twine/yarn through the curved hole and hang it somewhere, or use it as a necklace pendant, or …</p><p>Btw, Galaxy Green Prusament looks great with fuzzy skin, nicer than the photo can... | [
"box",
"card",
"sd",
"container",
"storage",
"microsd",
"pendant",
"microsdcard",
"tfcard",
"transflash"
] | Household > Office | [
"849773/images/image_1_compressed.jpg",
"849773/images/image_2_compressed.jpg",
"849773/images/image_3_compressed.jpg"
] | [
"849773/stls/micro_sd_pendant prusa.stl",
"849773/stls/micro_sd_pendant.stl"
] | CC-BY | https://www.printables.com/model/849773 | data_0048.tar |
333413 | Small modifications to Improved Auto Coin Sorter | <p>BikeCyclist's Improved Auto Coin Sorter is a great model: <a href="https://www.printables.com/model/53272-improved-auto-coin-sorter">https://www.printables.com/model/53272-improved-auto-coin-sorter</a></p><p>But I had some issues during printing and during operating the coin slide. So I made the following changes:</... | [] | Household > Other House Equipment | [
"333413/images/image_1_compressed.jpg"
] | [
"333413/stls/eur_-_euro__topboard_improved_auto_coin_sorter_v74_af-mod.stl"
] | CC-BY | https://www.printables.com/model/333413 | data_0048.tar |
265175 | Small Nerf Dart Box | <p>0.2mm layer height is the minimum. It has thin walls so any larger you'll have to tweak additional settings.</p><p>Box and Lid bottom layers have slight adjustments, my Prusa printer has some first layer issues which this solves.</p> | [
"storagebox",
"nerfdart"
] | Toys & Games > Other Toys & Games | [
"265175/images/image_1_compressed.jpg",
"265175/images/image_2_compressed.jpg"
] | [
"265175/stls/nerfbox_Box_Small.stl",
"265175/stls/nerfbox_Lid_Small.stl"
] | CC0 | https://www.printables.com/model/265175 | data_0048.tar |
163084 | Small Nozzle Wrench |
<p>Small nozzle wrench made to unscrew mk8 nozzles.</p>
<p>I couldn't really get a grip with the small wrench that the ender 3 came with so I made a small wrench to swap nozzles easier.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printe... | [
"tool",
"wrench",
"small",
"socket",
"nozzle",
"handtools",
"thingiverse",
"6mm",
"nozzlewrench"
] | Hobby & Makers > Tools | [
"163084/images/image_1_compressed.jpg",
"163084/images/image_2_compressed.jpg",
"163084/images/image_3_compressed.jpg"
] | [
"163084/stls/Nozzle_Wrench.stl"
] | CC-BY | https://www.printables.com/model/163084 | data_0048.tar |
451642 | Small Nutella Glass Candy Dispenser Remix | <p>this will fit the smaller size Nutella jar :) </p> | [
"glass",
"candy",
"jar",
"dispenser",
"nutella"
] | Household > Other House Equipment | [
"451642/images/image_1_compressed.jpg",
"451642/images/image_2_compressed.jpg",
"451642/images/image_3_compressed.jpg",
"451642/images/image_4_compressed.jpg",
"451642/images/image_5_compressed.jpg",
"451642/images/image_6_compressed.jpg"
] | [
"451642/stls/nutella adapter_v2.stl"
] | CC-BY | https://www.printables.com/model/451642 | data_0048.tar |
111345 | Small PC | <p>After printing it's bettter to glue parts to case</p> | [
"pc"
] | Gadgets > Computers | [
"111345/images/image_1_compressed.jpg",
"111345/images/image_2_compressed.jpg"
] | [
"111345/stls/Case.stl",
"111345/stls/Graphics_Card.stl",
"111345/stls/HDD.stl",
"111345/stls/Heatsink_and_Fan.stl",
"111345/stls/Motherboard.stl",
"111345/stls/Power_Supply.stl",
"111345/stls/RAM.stl",
"111345/stls/Side_Panel.stl",
"111345/stls/SSD.stl",
"111345/stls/Wifi_Card.stl"
] | CC0 | https://www.printables.com/model/111345 | data_0048.tar |
1244208 | Small quick print bookmark | <h4>Printing:</h4><p>I recommend printing this on 0,2 mm layer height.</p><p> </p><p> </p> | [] | Gadgets > Other Gadgets | [
"1244208/images/image_1_compressed.jpg",
"1244208/images/image_2_compressed.jpg",
"1244208/images/image_3_compressed.jpg",
"1244208/images/image_4_compressed.jpg"
] | [
"1244208/stls/Bookmark v1.stl"
] | CC-BY | https://www.printables.com/model/1244208 | data_0048.tar |
1085534 | Small Radiator Hook | <p>Winter is here and there is always need for drying kids/adults hats, gloves and other accessries. Hook width is 5 mm and hook assembly lenght is 15 mm. Should be OK for most EU and other heat radiators.</p><p>Ender3 V3 SE</p><p>Material: PLA</p><p>Layer: 0,2 mm</p><p>Infill: Honeycomb 15 %</p><p>Nozzle temp: 210</p>... | [
"hook",
"small",
"winter",
"accessories",
"clothes",
"3dprint",
"simple",
"radiator",
"radiatorhook",
"accessoriesholder"
] | Household > Other House Equipment | [
"1085534/images/image_1_compressed.jpg",
"1085534/images/image_2_compressed.jpg",
"1085534/images/image_3_compressed.jpg"
] | [
"1085534/stls/Radiator_Hook.stl"
] | CC-BY | https://www.printables.com/model/1085534 | data_0048.tar |
166077 | Small reel for fine wires and cables, modular | [
"accessory",
"wire",
"coil",
"bobine",
"supportbobine",
"imprimante",
"accessoires"
] | 3D Printers > Accessories | [
"166077/images/image_1_compressed.jpg"
] | [
"166077/stls/Extension.stl",
"166077/stls/Spule_A.stl",
"166077/stls/Spule_I.stl"
] | CC0 | https://www.printables.com/model/166077 | data_0048.tar | |
205972 | Small retraction test with marks | <figure class="image"><img src="https://media.printables.com/media/prints/205972/rich_content/76ca51a6-8074-439d-9d16-2474398312bb/image.png#%7B%22uuid%22%3A%22adc1c39a-07c1-45c0-a221-51295475339c%22%2C%22w%22%3A1038%2C%22h%22%3A322%7D"></figure><p>Use post processing plugin in Cura or other option in your slicer of ch... | [
"retraction",
"stringing",
"stringingtest",
"retractiontower"
] | 3D Printers > Test Models | [
"205972/images/image_1_compressed.jpg"
] | [
"205972/stls/retracttest5V1.stl",
"205972/stls/retracttest9V1.stl"
] | CC0 | https://www.printables.com/model/205972 | data_0048.tar |
378975 | Small Screw Organiser Box | <p>Simple Box for holding small screws when disassembling.<br>Takes about 45 mins to print. </p><p>Nothing terribly clever about it, but might save someone some trouble if they need a quick box when taking apart their 3D printer or swapping out a hot end etc.</p> | [
"organiser",
"workshoporganizer"
] | Hobby & Makers > Tools | [
"378975/images/image_1_compressed.jpg"
] | [
"378975/stls/ScrewOrganiser.stl"
] | CC0 | https://www.printables.com/model/378975 | data_0048.tar |
947499 | Small Shield Potion | <p>This is the small shield potion from Fortnite.</p><p>It has similar dimensions to the real item and should fit perfectly. Print both models upright without supports. I recommend printing the bottom in blue PLA or a clear filament like Polycarbonate or ABS. I recommend printing the lid in Wood Pla, or a brown filamen... | [
"bottle",
"mini",
"fortnite"
] | Gadgets > Video Games | [
"947499/images/image_1_compressed.jpg",
"947499/images/image_2_compressed.jpg",
"947499/images/image_3_compressed.jpg",
"947499/images/image_4_compressed.jpg"
] | [
"947499/stls/Bottle.stl",
"947499/stls/lid.stl"
] | CC-BY | https://www.printables.com/model/947499 | data_0048.tar |
113161 | Small Square Container | <p>Small container for storage etc.</p><p>Outside dimensions are 62mm high and with is 56mm<br>The container has an area for a sticker or label.<br>Updated: added version of container with card-label holder.</p><p>Updated: Added 1mm wall to avoid holes in LID model</p><p> </p><p><i>Check also my other designs: </i... | [
"container",
"small",
"square"
] | Household > Home Decor | [
"113161/images/image_1_compressed.jpg"
] | [
"113161/stls/SquareContainer+1mm-Lid2.2.stl",
"113161/stls/SquareContainer-labelholder2.1.stl",
"113161/stls/SquareContainer2.1.stl"
] | CC-BY | https://www.printables.com/model/113161 | data_0048.tar |
260931 | Small Threaded Box, vase mode | <p>This small box is the perfect size for holding rings, maybe while you are cooking or sleeping, or other little things. The threaded body and lid close securely. It needs to be printed in vase mode with 1 mm thick external perimeters. The included g-code is for PLA and a 0.6mm nozzle so it prints fa... | [] | Hobby & Makers > Organizers | [
"260931/images/image_1_compressed.jpg",
"260931/images/image_2_compressed.jpg"
] | [
"260931/stls/threaded box lid.stl",
"260931/stls/threaded box.stl"
] | CC-BY | https://www.printables.com/model/260931 | data_0048.tar |
1233763 | Small Tweezers | <p>This is a tweezer design that is only 1 gram of firmament! It is very easy to use, and can help you with a variety of tasks. Printing time is 11min, and half of that is preparation. This makes the model very easy to produce in large quantities on the same build plate.</p> | [
"small",
"easy",
"tweezers",
"userfriendly",
"endofspool"
] | Hobby & Makers > Tools | [
"1233763/images/image_1_compressed.jpg",
"1233763/images/image_2_compressed.jpg",
"1233763/images/image_3_compressed.jpg",
"1233763/images/image_4_compressed.jpg"
] | [
"1233763/stls/Small Tweezers.stl"
] | CC-BY | https://www.printables.com/model/1233763 | data_0048.tar |
68229 | Small watering Can | <p>I did my own Design on a small watering can, heavily inspired on the Mini seedling watering can from The save room.</p><p>I wasn't able to get his design watertight so i did my own with thicker walls and a different handle design.</p><p>I printed two version with 0.15 and 0.2 mm layer height an no supports both came... | [
"wateringcan",
"giesskanne",
"gieskanne"
] | Household > Outdoor & Garden | [
"68229/images/image_1_compressed.jpg",
"68229/images/image_2_compressed.jpg"
] | [
"68229/stls/Gieskanne.stl"
] | CC-BY | https://www.printables.com/model/68229 | data_0048.tar |
1395259 | Small Wearable Mini Magnifying Glass for Kids | <p>A tiny, wearable magnifying glass designed as a fun pendant for young detectives. Prints support-free and can be attached to a keyring or necklace. Perfect for imaginative play and exploration.</p> | [
"magnifyingglass"
] | Gadgets > Other Gadgets | [
"1395259/images/image_1_compressed.jpg"
] | [
"1395259/stls/Mini-Magnifying-Glass.stl"
] | GPL3.0 | https://www.printables.com/model/1395259 | data_0048.tar |
471493 | Small, Med, Large Cable Tie (Zip Tie) Anchor | <p>I wanted a tiny cable tie anchor and could only find 1" ones here and people were suggesting to scale it for 0.75" adhesive tape, but it also scaled the hole for the cable tie making it unusable.<br><br><br>Three files, all the same height, all allow 4mm cable ties<br><br>Small: 0.5" pad<br>Med: 0.75" pad<br>Large: ... | [
"ziptie",
"cablemanagement",
"cabletie",
"cableholder",
"cableclip"
] | Hobby & Makers > Organizers | [
"471493/images/image_1_compressed.jpg",
"471493/images/image_2_compressed.jpg"
] | [
"471493/stls/0_5in Anchor.stl",
"471493/stls/1in Anchor.stl",
"471493/stls/3_4in Anchor.stl"
] | CC0 | https://www.printables.com/model/471493 | data_0048.tar |
424332 | SMALLER Nespresso coffee capsule cup holder | <p>Nespresso coffee capsule cup holder made smaller to fit Ender 3V2 build volume.</p> | [
"coffee",
"ender3",
"nespresso"
] | Hobby & Makers > Organizers | [
"424332/images/image_1_compressed.jpg"
] | [
"424332/stls/Grand Curcan.stl"
] | CC0 | https://www.printables.com/model/424332 | data_0048.tar |
498826 | Smaller Pot for Modular Hydroponic Tower | <p>I don't think there is a need for such a complex Pot in the Modular Hydroponic Tower. In fact I prefer a more minimalist design.</p><p>I simply cut of the last part of the Pot. </p><p>As a result now 9 pots can be printed in one build plate, and I believe the tower looks more beautiful.</p> | [
"hydroponics"
] | Household > Outdoor & Garden | [
"498826/images/image_1_compressed.jpg",
"498826/images/image_2_compressed.jpg"
] | [
"498826/stls/9 start port 45 cut.stl"
] | CC0 | https://www.printables.com/model/498826 | data_0048.tar |
373143 | Smartphone Camera Rig | <h3>Smartphone Camera Rig</h3><p>Inspired by similar models, I made a "Smartphone Camera Rig" in a simple and universal version. </p><figure class="image image-style-align-center image_resized" style="width:75%;"><img src="https://media.printables.com/media/prints/373143/rich_content/cc2d7078-97a4-4859-9318-505b5a... | [
"camera",
"holder",
"phone",
"smartphone",
"smartphoneholder",
"rig",
"phoneholder"
] | Gadgets > Photo & Video | [
"373143/images/image_1_compressed.jpg",
"373143/images/image_2_compressed.jpg",
"373143/images/image_3_compressed.jpg",
"373143/images/image_4_compressed.jpg",
"373143/images/image_5_compressed.jpg",
"373143/images/image_6_compressed.jpg",
"373143/images/image_7_compressed.jpg"
] | [
"373143/stls/Phone_Rig_Clamp_Bottom v1.stl",
"373143/stls/Phone_Rig_Clamp_Bottom v2 (Longer).stl",
"373143/stls/Phone_Rig_Clamp_Bottom v2 (The longest).stl",
"373143/stls/Phone_Rig_Clamp_Knurl_Head v1.stl",
"373143/stls/Phone_Rig_Clamp_Screw v1.stl",
"373143/stls/Phone_Rig_Clamp_Up v1.stl",
"373143/stls... | CC-BY | https://www.printables.com/model/373143 | data_0048.tar |
277462 | Smartphone Stand (Key Shaped) | <p><strong>A minimal smartphone stand that fits great between your keys (Key Shaped)</strong></p><figure class="image"><img src="https://media.printables.com/media/prints/277462/rich_content/d897dfbb-ff92-496f-8b9b-f3ee33974e84/1663361253410.jpg#%7B%22uuid%22%3A%22b80db761-6bae-44c8-94ed-94cadadf0b92%22%2C%22w%22... | [
"tool",
"stand",
"keychain",
"smartphone"
] | Hobby & Makers > Tools | [
"277462/images/image_1_compressed.jpg",
"277462/images/image_10_compressed.jpg",
"277462/images/image_11_compressed.jpg",
"277462/images/image_12_compressed.jpg",
"277462/images/image_2_compressed.jpg",
"277462/images/image_3_compressed.jpg",
"277462/images/image_4_compressed.jpg",
"277462/images/imag... | [
"277462/stls/Keychain_Stand_10mm_M.stl",
"277462/stls/Keychain_Stand_10mm_M_LONG.stl",
"277462/stls/Keychain_Stand_12mm_L.stl",
"277462/stls/Keychain_Stand_12mm_L_LONG.stl",
"277462/stls/Keychain_Stand_14mm_XL.stl",
"277462/stls/Keychain_Stand_14mm_XL_LONG.stl",
"277462/stls/Keychain_Stand_8mm_S.stl",
... | CC-BY | https://www.printables.com/model/277462 | data_0048.tar |
82772 | SmartThings Hub (gen2) Minimalist Wall Mount | <p>Minimalist wall mount for the Smartthings V2 hub. Printed in white, it's almost imperceptible. You will need to print with supports, for the prongs that snap over the top. The hub is a weird asymmetric rectangular shape, where <i>one end is higher than the other</i>, so I added ethernet/power cable cutouts to make i... | [
"wallmount",
"smartthings",
"thingiverse",
"smartthingshub",
"smartthingsv2",
"smartthingwallmount"
] | Household > Other House Equipment | [
"82772/images/image_1_compressed.jpg",
"82772/images/image_2_compressed.jpg",
"82772/images/image_3_compressed.jpg",
"82772/images/image_4_compressed.jpg",
"82772/images/image_5_compressed.jpg",
"82772/images/image_6_compressed.jpg",
"82772/images/image_7_compressed.jpg",
"82772/images/image_8_compres... | [
"82772/stls/Smartthings hubv2 wall mount BEEFY REVISION v2.stl",
"82772/stls/Smartthings_hubv2_wall_mount_v1.stl"
] | CC-BY | https://www.printables.com/model/82772 | data_0048.tar |
80431 | Smartwatch charging stand | [] | Fashion > Other Fashion Accessories | [
"80431/images/image_1_compressed.jpg",
"80431/images/image_2_compressed.jpg",
"80431/images/image_3_compressed.jpg",
"80431/images/image_4_compressed.jpg"
] | [
"80431/stls/watchstand.stl"
] | CC0 | https://www.printables.com/model/80431 | data_0048.tar | |
151712 | Smatphone Stand | <p>Foldable stand for Smartphone .</p><p>It can be used with Tablets but if the weight or size is high, the support can be closed.</p> | [
"stand",
"phone",
"smartphone",
"tablet",
"smartphoneholder",
"smartphonestand"
] | Household > Office | [
"151712/images/image_1_compressed.jpg",
"151712/images/image_2_compressed.jpg"
] | [
"151712/stls/Phone-tablet stand.stl"
] | CC-BY | https://www.printables.com/model/151712 | data_0048.tar |
197178 | Smiley Shopping Cart Token and Highjacker | <p>Use either coin or highjackig tool for your next shopping ;)</p>
Category: Tools | [
"coin",
"face",
"euro",
"car",
"token",
"shopping",
"cart",
"shoppingcart",
"smiley",
"thingiverse",
"smile",
"muenze"
] | Hobby & Makers > Tools | [
"197178/images/image_1_compressed.jpg",
"197178/images/image_2_compressed.jpg",
"197178/images/image_3_compressed.jpg",
"197178/images/image_4_compressed.jpg",
"197178/images/image_5_compressed.jpg",
"197178/images/image_6_compressed.jpg"
] | [
"197178/stls/EURO_coin_highjacker.stl",
"197178/stls/EURO_COIN_highjacker_Version_2.stl",
"197178/stls/EURO_COIN_Version_2.stl",
"197178/stls/EURO_shopping_cart_coin.stl"
] | CC-BY | https://www.printables.com/model/197178 | data_0048.tar |
671986 | Smittybilt Bumpers for 3DSets RC Jeep Rancher (Wrangler) | <p>I wanted the same bumpers as my Jeep Wrangler, so I re-diesigned the originals from 3DSets.</p><p>I also customized the winch, winch hawse, a stronger winch drum and the D-Rings. Printed with Overture Matte PLA with 80% infill and 0,10 layer. In the pictures you can find the best way of orientation for printing.</p>... | [
"jeep",
"3dsets",
"bumper",
"jeepwrangler",
"wrangler",
"rancher",
"rancher4x4",
"rancher4door",
"bumpers"
] | Hobby & Makers > RC & Robotics | [
"671986/images/image_1_compressed.jpg",
"671986/images/image_2_compressed.jpg",
"671986/images/image_3_compressed.jpg",
"671986/images/image_4_compressed.jpg",
"671986/images/image_5_compressed.jpg",
"671986/images/image_6_compressed.jpg",
"671986/images/image_7_compressed.jpg",
"671986/images/image_8... | [
"671986/stls/Dring.stl",
"671986/stls/Front Bumper Smittybilt.stl",
"671986/stls/Front Frame End Smittybilt.stl",
"671986/stls/Front Skid Plate Smittybilt.stl",
"671986/stls/Rear Bumper Smittybilt.stl",
"671986/stls/Winch cover.stl",
"671986/stls/Winch Drum.stl",
"671986/stls/Winch Hawse.stl",
"6719... | CC-BY | https://www.printables.com/model/671986 | data_0048.tar |
210463 | Smol Spiny Fidgety | <p>Print in place small spiny thing to fidget with! uses only 2 meters of filament<br>designed to print at 0.3mm layer height in space between the spinner part and the loop so that it can freely move, you can use variable layer height to print the rest at another though</p> | [
"spinner",
"fidget",
"fidgettoy",
"round",
"fidgeter",
"torus"
] | Toys & Games > Other Toys & Games | [
"210463/images/image_1_compressed.jpg"
] | [
"210463/stls/prusa print comp last meters.stl"
] | GPL2.0 | https://www.printables.com/model/210463 | data_0048.tar |
973467 | Smooth Anemometer Wind Spinner with Printed Bearings | <p>This project contains ballbeaings, runs very smoothly, no need to purchase extra ballbearings.</p><p>Quantity to print：</p><ol><li>Ball * 20,</li><li>Cup * 4,</li><li>Direction_indicator * 1,</li><li>Inner_ballbearing1 * 2,</li><li>Inner_ballbearing2 * 2,</li><li>Main_rotor * 1,</li><li>Pole * 1,</li><li>Separator *... | [
"spinner",
"garden",
"wind",
"windspinner",
"anemometer"
] | Household > Outdoor & Garden | [
"973467/images/image_1_compressed.jpg",
"973467/images/image_2_compressed.jpg"
] | [
"973467/stls/Ball.stl",
"973467/stls/Cup.stl",
"973467/stls/Direction_indicator.stl",
"973467/stls/Inner_ballbeaing1.stl",
"973467/stls/Inner_ballbeaing2.stl",
"973467/stls/Main_rotor.stl",
"973467/stls/Pole.stl",
"973467/stls/Separator.stl",
"973467/stls/Top_cover.stl"
] | CC0 | https://www.printables.com/model/973467 | data_0048.tar |
916954 | SN-2549 Crimp Tool Positioner for Molex SL contacts | <p>This is a positioner for the IWISS SN-2549 crimp tool for Molex SL contacts (male and female). The positioner is secured to the tool using a 20mm M4 screw and nut. Replace the existing screw with the new screw while the jaws are closed to maintain jaw alignment.<br><br>I designed this for use by the FRC team I mento... | [
"crimper",
"molex",
"crimp",
"iwiss"
] | Hobby & Makers > Tools | [
"916954/images/image_1_compressed.jpg",
"916954/images/image_10_compressed.jpg",
"916954/images/image_2_compressed.jpg",
"916954/images/image_3_compressed.jpg",
"916954/images/image_4_compressed.jpg",
"916954/images/image_5_compressed.jpg",
"916954/images/image_6_compressed.jpg",
"916954/images/image_... | [
"916954/stls/IWISS_SN-2549_Positioner_for_Molex_SL.stl"
] | GPL3.0 | https://www.printables.com/model/916954 | data_0048.tar |
180414 | Snail | <p>Haptic model for the visually impaired, based on the book "<a href="https://www.databazeknih.cz/knihy/prekvapeni-skritka-modrovouska-181087">Překvapení skřítka Modrovouska</a>" by Markéta Vítková. </p><p>Read more about the project on <a href="https://prusalab.cz/en/blog/haptic-models/">PrusaLab's blog</a>.</p> | [] | Learning > Haptic Models | [
"180414/images/image_1_compressed.jpg",
"180414/images/image_2_compressed.jpg"
] | [
"180414/stls/snek1.stl"
] | CC0 | https://www.printables.com/model/180414 | data_0048.tar |
526279 | Snail - Mosquito Coil Burner | <p>A burner for mosquito coils that is very quick and easy to print.</p><p> </p><p><strong>Printing parameters:</strong></p><p><strong>Material:</strong> ANY<br><strong>Layer height:</strong> 0.1-0.2 mm<br><strong>Supports:</strong> Yes (only for the burner, not necessary for the pin)<br> </p> | [
"garden",
"mosquito",
"snail",
"simple",
"burner",
"coil",
"mosquitocoil"
] | Household > Outdoor & Garden | [
"526279/images/image_1_compressed.jpg",
"526279/images/image_2_compressed.jpg"
] | [
"526279/stls/Burner.stl",
"526279/stls/PIN.stl"
] | CC-BY | https://www.printables.com/model/526279 | data_0048.tar |
1583310 | Snail Skull | [
"skull",
"snail"
] | Art & Design > Sculptures | [
"1583310/images/image_1_compressed.jpg"
] | [
"1583310/stls/Snail Skull.stl"
] | CC0 | https://www.printables.com/model/1583310 | data_0048.tar | |
1258499 | Snake | [
"snake"
] | World & Scans > Animals | [
"1258499/images/image_1_compressed.jpg",
"1258499/images/image_2_compressed.jpg"
] | [
"1258499/stls/Snake.stl"
] | CC-BY | https://www.printables.com/model/1258499 | data_0048.tar | |
398599 | Snake Hide Pumpkin | <p>A squashed remix of the pumpkin reptile hide with a larger opening. This reduces the amount of material needed to print significantly and the height doesn't matter much for snakes. On the "fast" setting, my QIDI TECH X-Pro finished this in just over 9 hours.</p><h3>Print Settings</h3><p><strong>Printer:</strong></p>... | [
"snake",
"pumpkin",
"thingiverse",
"hide",
"snakes"
] | Household > Pets | [
"398599/images/image_1_compressed.jpg",
"398599/images/image_2_compressed.jpg",
"398599/images/image_3_compressed.jpg",
"398599/images/image_4_compressed.jpg"
] | [
"398599/stls/Snake_Pumpkin.stl"
] | BSD | https://www.printables.com/model/398599 | data_0048.tar |
1622817 | Snakes eyes | [
"snake",
"cute",
"fun",
"articulated",
"parts",
"eyes",
"singlecolor",
"singlecolorprinter",
"singlecolorprint"
] | Toys & Games > Other Toys & Games | [
"1622817/images/image_1_compressed.jpg",
"1622817/images/image_2_compressed.jpg",
"1622817/images/image_3_compressed.jpg"
] | [
"1622817/stls/snake eyes_eye.stl",
"1622817/stls/snake eyes_snake.stl"
] | CC-BY | https://www.printables.com/model/1622817 | data_0048.tar | |
101089 | Snakez Bracelet - 16 links version |
<p>This is a remix from the Snakez Bracelet. I removed two links to make a 16 link version, so it can fit smaller arms.</p>
Category: Bracelets
| [
"snake",
"link",
"chain",
"bracelet",
"thingiverse",
"snakez"
] | Fashion > Other Fashion Accessories | [
"101089/images/image_1_compressed.jpg",
"101089/images/image_2_compressed.jpg"
] | [
"101089/stls/Bracelet-16M.stl"
] | CC-BY | https://www.printables.com/model/101089 | data_0048.tar |
955736 | Snap Buckle Clip | <p>Printed in PLA and PETG-CF. But Preferrably in a material which:</p><ul><li>Does not creep over time (PLA does creep)</li><li>Has good layer adhesion</li></ul><p>However the springs are only tensioned while inserting, so even when printed in PLA creep should not be a big issue.</p><p><a href="https://cad.onshape.com... | [
"clip",
"buckle",
"snap"
] | Fashion > Other Fashion Accessories | [
"955736/images/image_1_compressed.jpg",
"955736/images/image_2_compressed.jpg",
"955736/images/image_3_compressed.jpg",
"955736/images/image_4_compressed.jpg",
"955736/images/image_5_compressed.jpg",
"955736/images/image_6_compressed.jpg"
] | [
"955736/stls/buckle_clip - inner.stl",
"955736/stls/buckle_clip - outer.stl"
] | CC-BY | https://www.printables.com/model/955736 | data_0048.tar |
569893 | Snap Cap Hat Extender | <p>Hey there! Are you fed up with snapback caps that just won't fit comfortably on your head? Well, we've got the perfect solution for you! Introducing the Snap Back Cap ... | [
"cap",
"hat",
"adjustable",
"extender",
"baseball",
"hairnerd"
] | Fashion > Other Fashion Accessories | [
"569893/images/image_1_compressed.jpg",
"569893/images/image_2_compressed.jpg",
"569893/images/image_3_compressed.jpg",
"569893/images/image_4_compressed.jpg"
] | [
"569893/stls/hat adapter.stl"
] | CC0 | https://www.printables.com/model/569893 | data_0048.tar |
394106 | Snap fit Amazon Echo Dot wall mount | <p>I reuploaded this model from <a href="https://www.thingiverse.com/thing:2066228">Thingiverse</a> to have it here at printables.com</p> | [
"alexa",
"amazonechodot",
"echodot",
"amazonalexa"
] | Gadgets > Audio | [
"394106/images/image_1_compressed.jpg",
"394106/images/image_2_compressed.jpg",
"394106/images/image_3_compressed.jpg"
] | [
"394106/stls/echoWallMount-flat.stl",
"394106/stls/echoWallMount-screwHoles.stl"
] | CC-BY | https://www.printables.com/model/394106 | data_0048.tar |
1703273 | Snap-Fit Beverage Can Lid (7.5 oz Soda can/12oz Energy drink can) | <p>This is a precision-engineered, snap-fit lid designed specifically for the standard aluminum rim of 7.5 oz soda can/12oz</p><p></p><p>Comment if you would like me to add designs to these</p> | [
"cancover",
"snaplid"
] | Household > Kitchen | [
"1703273/images/image_1_compressed.jpg",
"1703273/images/image_2_compressed.jpg"
] | [
"1703273/stls/Beverage_Etc_Can_cover.stl"
] | CC-BY | https://www.printables.com/model/1703273 | data_0048.tar |
151102 | Snap-Fit Joint Test Prints - Eight Versions | <p>This is a series of test prints which were inspired by the following MIT publication :</p><p><i><strong>Snap-Fit Joints for Plastics - A Design Guide</strong></i></p><p><a href="https://fab.cba.mit.edu/classes/S62.12/people/vernelle.noel/Plastic_Snap_fit_design.pdf">https://fab.cba.mit.edu/classes/S62.12/people/vern... | [] | 3D Printers > Test Models | [
"151102/images/image_1_compressed.jpg",
"151102/images/image_2_compressed.jpg",
"151102/images/image_3_compressed.jpg",
"151102/images/image_4_compressed.jpg",
"151102/images/image_5_compressed.jpg",
"151102/images/image_6_compressed.jpg",
"151102/images/image_7_compressed.jpg",
"151102/images/image_8... | [
"151102/stls/Annular - All.stl",
"151102/stls/Annular - AnnularRing.stl",
"151102/stls/Annular - AnnularSnap.stl",
"151102/stls/AnnularContinuous - All.stl",
"151102/stls/AnnularContinuous - Bottom.stl",
"151102/stls/AnnularContinuous - Top.stl",
"151102/stls/Cantilever01 - All.stl",
"151102/stls/Cant... | CC0 | https://www.printables.com/model/151102 | data_0048.tar |
585701 | Snap-lock Pin for Gridfinity Screw Together Baseplate | <p>Snap-lock pin for the <a href="https://www.printables.com/model/300603-gridfinity-screw-together-baseplate">screw together gridfinity baseplate by Kyle Warren.</a><br> </p><p>Itself <a href="https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Baseplates-60925">Based on ZackFreedman design</a>.<br><... | [] | Hobby & Makers > Organizers | [
"585701/images/image_1_compressed.jpg",
"585701/images/image_2_compressed.jpg"
] | [
"585701/stls/Snap-lock Pin for Gridfinity Screw Together Baseplate.stl"
] | CC-BY | https://www.printables.com/model/585701 | data_0048.tar |
203611 | Snap-on Bobbin Thread Spool Holder (with optional inlay in English or French) | <p>This is a remix of <i>poison_doc</i>'s great design (<a href="https://www.thingiverse.com/thing:2551362">https://www.thingiverse.com/thing:2551362</a>), adding a snap-on mechanism to securely hold the top in place - and an optional inlay for the top, stating what's inside...</p><p><i>(Note: This was originally publi... | [
"storage",
"organization",
"sewing",
"bobbin",
"thingiverse"
] | Fashion > Other Fashion Accessories | [
"203611/images/image_1_compressed.jpg",
"203611/images/image_2_compressed.jpg",
"203611/images/image_3_compressed.jpg",
"203611/images/image_4_compressed.jpg",
"203611/images/image_5_compressed.jpg"
] | [
"203611/stls/snapon-bobbins-case-with-inlay-english.stl",
"203611/stls/snapon-bobbins-case-with-inlay-french-scaled.stl",
"203611/stls/snapon-bobbins-case-with-inlay-french.stl",
"203611/stls/snapon-bobbins-case.stl",
"203611/stls/snapon-bottom.stl",
"203611/stls/snapon-top.stl"
] | CC-BY | https://www.printables.com/model/203611 | data_0048.tar |
254214 | Snap-on protective cover for SZ-BT07CCCV DC-DC Boost converter | <p>This simple cover allows to protect your SZ-BT07CCCV module electronics from accidental mechanical damage. It snaps on without the use of screws, stays snug, but allows you to take it off easily to access the voltage/current screws on the board.</p><p>Has hexagons on it!</p><p>PETG works well for this print as it al... | [
"dc",
"shield",
"cover",
"stepup",
"boostconverter",
"stepupconverter"
] | Hobby & Makers > Electronics | [
"254214/images/image_1_compressed.jpg",
"254214/images/image_2_compressed.jpg",
"254214/images/image_3_compressed.jpg",
"254214/images/image_4_compressed.jpg",
"254214/images/image_5_compressed.jpg",
"254214/images/image_6_compressed.jpg"
] | [
"254214/stls/step_up_cover.stl"
] | CC-BY | https://www.printables.com/model/254214 | data_0048.tar |
1355454 | SnapCap - Universal Refill Cap | <p>With this lid, you can reuse existing bottles with the soap of your choice, no more wrestling with the cap or paying for brand-specific refills. Just cut off the original top of the bottle as shown, and this pops into place.</p><p>Ideal for saving money, reducing waste, and making your dispenser reusable.</p> | [
"lid",
"soap",
"refill",
"dispenser",
"reuable"
] | Household > Bathroom | [
"1355454/images/image_1_compressed.jpg",
"1355454/images/image_2_compressed.jpg"
] | [
"1355454/stls/soap_topper.stl"
] | GPL3.0 | https://www.printables.com/model/1355454 | data_0048.tar |
467377 | Snapmaker Artisan Laser Bed Comb | <p>A simple tool for combing out the cutting scraps from the Laser Bed of the Snapmaker Artisan.</p><p>Designed to be flexible and quick to print, prints in about 6 minutes.</p><p>Made with Onshape:<br>Source CAD: <a href="https://cad.onshape.com/documents/c7dc6346c634be318cd0fc07/w/df10e2204da03bd419a6633b/e/d2559b1ba... | [
"laser",
"bed",
"comb",
"snapmaker",
"artisan"
] | Hobby & Makers > Tools | [
"467377/images/image_1_compressed.jpg",
"467377/images/image_2_compressed.jpg"
] | [
"467377/stls/Laser Bed Comb.stl"
] | CC0 | https://www.printables.com/model/467377 | data_0048.tar |
383375 | SnapMaker J1 Front Load Spool Retrofit | <p>This retrofit converts a Snapmaker J1 from rear-mounted filament to a front-loading spool system. The two filament holders utilize the empty space inside the printer to the left and right of the bed and can be loaded from the front which can be more convenient.</p><p>It is comprised of two adjustable width spool hol... | [
"filamentspoolholder",
"thingiverse"
] | 3D Printers > Other Printer Parts & Upgrades | [
"383375/images/image_1_compressed.jpg",
"383375/images/image_10_compressed.jpg",
"383375/images/image_11_compressed.jpg",
"383375/images/image_12_compressed.jpg",
"383375/images/image_13_compressed.jpg",
"383375/images/image_14_compressed.jpg",
"383375/images/image_15_compressed.jpg",
"383375/images/i... | [
"383375/stls/FrontLoadFilament_passthru.stl",
"383375/stls/FrontLoadknob2.stl",
"383375/stls/FrontLoadscrew2.stl",
"383375/stls/SpoolSlider4.stl",
"383375/stls/Spool_baseV3.stl"
] | CC-BY | https://www.printables.com/model/383375 | data_0048.tar |
558703 | Snapmaker J1 / J1S Simple Fan Shroud Upgrade | <p>This is a direct replacement of the stock Snapmaker J1 / J1S part cooling fan shroud. It moves the air directly to the tip of the nozzle, and not onto the heat block as the original one does.</p><p>The air should also flow better on all sides, not just from one direction. </p><p>Print in Mirror Mode on the J1. ... | [
"fanshroud",
"snapmakerj1"
] | 3D Printers > Other Printer Parts & Upgrades | [
"558703/images/image_1_compressed.jpg",
"558703/images/image_2_compressed.jpg",
"558703/images/image_3_compressed.jpg",
"558703/images/image_4_compressed.jpg"
] | [
"558703/stls/J1_fan_atle_mo.stl",
"558703/stls/J1_fan_atle_mo_more_airflow.stl",
"558703/stls/J1_fan_shroud_left_right.stl"
] | CC-BY | https://www.printables.com/model/558703 | data_0048.tar |
1691704 | Snapmaker U1 Lid Pegs - Easy Mount for IKEA Samla | <p>Remove the factory silicone plugs and replace them with these four pegs, positioning their protrusions toward the printer’s centerline. Then place an inverted Samla 45L bin ($7 at IKEA) on top.</p><p><em>Voilà !</em> With that cover and this five-gram low-profile mount, your Snapmaker U1 is now sufficiently enclosed... | [
"ikea",
"printer",
"lid",
"minimalist",
"peg",
"top",
"samla",
"snapmaker",
"u1",
"snapmakeru1"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1691704/images/image_1_compressed.jpg",
"1691704/images/image_2_compressed.jpg",
"1691704/images/image_3_compressed.jpg",
"1691704/images/image_4_compressed.jpg"
] | [
"1691704/stls/u1-samla-peg-x4.stl",
"1691704/stls/u1-samla-peg.stl"
] | BSD | https://www.printables.com/model/1691704 | data_0048.tar |
1083854 | SNES - USB-C - Backpanel | <p>USB-C Backpanel for the Super Nintendo - SNES.</p><p>1x <a href="https://www.aliexpress.com/item/1005006349176718.html">PDC004-PD </a>(12v)</p> | [
"nintendo",
"snes",
"supernintendo",
"usbc"
] | Gadgets > Video Games | [
"1083854/images/image_1_compressed.jpg",
"1083854/images/image_2_compressed.jpg"
] | [
"1083854/stls/SNES - USB-C - Backpanel.stl"
] | CC0 | https://www.printables.com/model/1083854 | data_0048.tar |
12124 | SNES Dust cover - friction fit | <p>Results were obtained printing with 0.3 mm layer height on a 0.4 mm nozzle in spiral vase mode. Prints in about 25 minutes. Silver prusament PLA is a nice color match.</p>
<p>Enjoy - this is my first designed project, and it worked fantastically well.</p>
<h3>Print instructions</h3><h3>Category: Video Games Print Se... | [
"snes",
"thingiverse",
"dustcover",
"snescartrige"
] | Toys & Games > Outdoor Toys | [
"12124/images/image_1_compressed.jpg",
"12124/images/image_2_compressed.jpg"
] | [
"12124/stls/snes_dust_cover.stl"
] | BSD | https://www.printables.com/model/12124 | data_0048.tar |
1091497 | SNES / Super Famicom Cartridge Stand | [
"nintendo",
"videogame",
"cartridge",
"snes",
"supernintendo",
"nintendocartridge",
"superfamicom"
] | Gadgets > Video Games | [
"1091497/images/image_1_compressed.jpg",
"1091497/images/image_2_compressed.jpg"
] | [
"1091497/stls/snes cart stand.stl"
] | CC0 | https://www.printables.com/model/1091497 | data_0048.tar | |
141657 | SNES30PRO/SFC30PRO Stand |
<p>Simple display stand for your 8BITDO SNES30PRO or SFC30PRO controller.</p>
<p>Print in the orientation that it will sit on your desk. No supports needed.</p>
<p>Mine was printed at 0.2mm layers with 20% infill in ABS on a FlashForge Creator Pro</p>
Category: Video Games
| [
"nintendoswitch",
"thingiverse",
"8bitdo"
] | Gadgets > Other Gadgets | [
"141657/images/image_1_compressed.jpg",
"141657/images/image_2_compressed.jpg",
"141657/images/image_3_compressed.jpg",
"141657/images/image_4_compressed.jpg",
"141657/images/image_5_compressed.jpg",
"141657/images/image_6_compressed.jpg",
"141657/images/image_7_compressed.jpg",
"141657/images/image_8... | [
"141657/stls/SNES30Pro_stand_1.2.2.stl",
"141657/stls/SNES30Pro_stand_8bitdo_logo.stl",
"141657/stls/SNES30Pro_stand_Analoge.stl",
"141657/stls/SNES30Pro_stand_smash.stl",
"141657/stls/SNES30Pro_stand_snes_logo.stl",
"141657/stls/SNES30Pro_stand_steam.stl",
"141657/stls/SNES30Pro_stand_Switch_Logo.stl"
... | CC-BY | https://www.printables.com/model/141657 | data_0048.tar |
794459 | SNL inspired Pongo shaped friend! | <p>He's a Pongo-shaped friend! He can't die, he just it!</p><p>I tried to adjust him to be a bit more like the SNL Pongo than the original model.</p><p> </p> | [] | Art & Design > Other Art & Designs | [
"794459/images/image_1_compressed.jpg"
] | [
"794459/stls/Pongo.stl"
] | CC0 | https://www.printables.com/model/794459 | data_0048.tar |
83766 | Snoopy and Woodstock Letterbox |
<p>The part for snoopy can be found at www.thingiverse.com/thing:4089267</p>
<p>This was printer on a resin SLA printer.</p>
<p>The file is for only Woodstock</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Anycubic</p>
<p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Phot... | [
"thingiverse"
] | Art & Design > Sculptures | [
"83766/images/image_1_compressed.jpg",
"83766/images/image_2_compressed.jpg",
"83766/images/image_3_compressed.jpg",
"83766/images/image_4_compressed.jpg"
] | [
"83766/stls/woodstock_small.stl"
] | CC-BY | https://www.printables.com/model/83766 | data_0048.tar |
1190342 | Snoopy Valentine | <p>I designed this with raised outlines, so it should be easy to do with multicolor, filament changes, or painting. It looks best printed larger, in my opinion. </p> | [
"valentine",
"snoopy"
] | Art & Design > 2D Plates & Logos | [
"1190342/images/image_1_compressed.jpg"
] | [
"1190342/stls/Snoopy Valentine 1.stl"
] | CC0 | https://www.printables.com/model/1190342 | data_0048.tar |
728049 | Snow Duck from Kimgooni | <p>My kids love this one so much that I have to print it every winter and we give it a present to other kids who love it also :D</p> | [
"ball",
"snow",
"duck"
] | Sports & Outdoor > Winter Sports | [
"728049/images/image_1_compressed.jpg",
"728049/images/image_2_compressed.jpg"
] | [
"728049/stls/snow_duck.stl"
] | CC-BY | https://www.printables.com/model/728049 | data_0048.tar |
825198 | Snowboard Stomp Pad | [
"stomp",
"snowboard",
"pad"
] | Sports & Outdoor > Winter Sports | [
"825198/images/image_1_compressed.jpg"
] | [
"825198/stls/stomppad01.stl"
] | CC-BY | https://www.printables.com/model/825198 | data_0048.tar | |
675481 | Snowflake 18cm | <p>Große Schneeflocke mit Aufhänger für euer Fenster oder Wand. Die tatsächliche Größe seht ihr auf dem Bild. </p><p>Die erste Schicht am besten sehr langsam drucken, damit alle Rundungen ordentlich am Druckbett haften. </p><p> </p><p>Meine Einstellungen (nur als Info)</p><ul><li>gedruck mit weißen PLA+<... | [
"snowflakes",
"snowflake",
"window",
"xmas",
"weihnachten",
"weihnachtsdekoration",
"schneeflocke",
"weihnachtsdeko",
"schneeflocken",
"eiskristall"
] | Seasonal designs > Winter & Christmas & New Year's | [
"675481/images/image_1_compressed.jpg",
"675481/images/image_2_compressed.jpg",
"675481/images/image_3_compressed.jpg"
] | [
"675481/stls/Snowflake 18cm.stl"
] | CC0 | https://www.printables.com/model/675481 | data_0048.tar |
322847 | Snowflake 3 - sněhová vločka 3 | <p>Snowflake created from image.</p><p>Three verisons - big for your resize, small and small with hole.</p> | [
"snowflakes",
"snowflake",
"christmas",
"winter",
"christmasdecoration",
"vlocka",
"vanoce",
"winterdecoration",
"vanocnidekorace"
] | Seasonal designs > Winter & Christmas & New Year's | [
"322847/images/image_1_compressed.jpg",
"322847/images/image_2_compressed.jpg"
] | [
"322847/stls/snowflake 3 - small.stl",
"322847/stls/snowflake 3 with hole.stl",
"322847/stls/snowflake 3.stl"
] | CC-BY | https://www.printables.com/model/322847 | data_0048.tar |
263708 | Snowflake challenge |
<p>Simple snowflake made using BlocksCAD, for the Snowflake competition:
<a href="/challenges/BlocksCADSnowflake/">https://www.thingiverse.com/challenges/BlocksCADSnowflake/</a></p>
Category: Math Art
| [
"thingiverse",
"blockscadsnowflake"
] | Art & Design > Other Art & Designs | [
"263708/images/image_1_compressed.jpg",
"263708/images/image_2_compressed.jpg"
] | [
"263708/stls/Snowflake_challenge.stl"
] | CC-BY | https://www.printables.com/model/263708 | data_0048.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.