model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
1326716 | Silakka54 tenting platform aliexpress edition 5 degree | <p>LH side only. To make the other one simply mirror it in your slicer</p> | [
"tent",
"aliexpress",
"silakka54",
"squalius"
] | Gadgets > Computers | [
"1326716/images/image_1_compressed.jpg",
"1326716/images/image_2_compressed.jpg",
"1326716/images/image_3_compressed.jpg"
] | [
"1326716/stls/silakka54 5 degree aliexpress.stl"
] | CC-BY | https://www.printables.com/model/1326716 | data_0047.tar |
957118 | Silica Gel Box | <p><a href="https://cad.onshape.com/documents/20f89b820149defb54424214/w/4fabcb4490345444195aa9d3/e/e37f8a58a2fd8d4fa87c95c8?renderMode=0&rightPanel=variableTablePanel&uiState=66a69b5aaf9ae75c5af8dedc">Parametric Onshape Model</a></p><p>This Model features a zero retract design for the walls. It is designed to ... | [
"box",
"filament",
"dry",
"thread",
"silica",
"moisture",
"basket",
"silicagel"
] | 3D Printers > Accessories | [
"957118/images/image_1_compressed.jpg",
"957118/images/image_2_compressed.jpg",
"957118/images/image_3_compressed.jpg",
"957118/images/image_4_compressed.jpg",
"957118/images/image_5_compressed.jpg"
] | [
"957118/stls/silica_gel_box - jar 39.4mm.stl",
"957118/stls/silica_gel_box - jar 52mm.stl",
"957118/stls/silica_gel_box - lid.stl",
"957118/stls/wrench.stl"
] | CC-BY | https://www.printables.com/model/957118 | data_0047.tar |
7051 | Silica Gel Container Funnel | <p>I printed out several of the <a href="https://www.thingiverse.com/thing:3222374">Inside Spool Silica Gel Containers</a> but needed a way to get the loose silica beads into the container with out making too much of a mess. I knew a funnel would be perfect, but I didn't want to use my kitchen funnels. (Probably not a ... | [
"silica",
"funnel",
"desiccant",
"thingiverse",
"silicagel"
] | 3D Printers > Accessories | [
"7051/images/image_1_compressed.jpg",
"7051/images/image_2_compressed.jpg",
"7051/images/image_3_compressed.jpg",
"7051/images/image_4_compressed.jpg",
"7051/images/image_5_compressed.jpg",
"7051/images/image_6_compressed.jpg",
"7051/images/image_7_compressed.jpg",
"7051/images/image_8_compressed.jpg"... | [
"7051/stls/silicafunnel.stl"
] | CC-BY | https://www.printables.com/model/7051 | data_0047.tar |
597406 | Silica gel container with funnel / Silica-Gel-Behälter mit Trichter 64 mm x 25 mm | <p>The silica containers I've found so far have always been too big for me, so I had to make something of my own.<br>And tada... another silica gel container, but this time more handy and with a funnel for easy filling.</p><h5>Dimensions of the container:</h5><p>Height with lid: 64 mm<br>Diameter: 25 mm<br>Silica filli... | [
"container",
"silica",
"gel",
"silicagel",
"silicagelcase",
"silicagelcontainer",
"behaelter"
] | 3D Printers > Accessories | [
"597406/images/image_1_compressed.jpg"
] | [
"597406/stls/Silica_Gel_Container.stl",
"597406/stls/Silica_Gel_Container_Funnel.stl",
"597406/stls/Silica_Gel_Container_Lid.stl",
"597406/stls/Silicia Gel Container with Funnel v10.stl"
] | LGPL | https://www.printables.com/model/597406 | data_0047.tar |
914230 | Silica Spoon v2 | <p>A smaller version of the silica spoon. 2 versions available. One for left handed people and one for right handed people.</p><p>Can be printed in your favorite material. Does not need support (if printed with variable or low layer height). If you want the cleanest possible finish for the inside of the spoon, then you... | [
"silica",
"spoon",
"utility",
"silicagel"
] | 3D Printers > Accessories | [
"914230/images/image_1_compressed.jpg",
"914230/images/image_2_compressed.jpg"
] | [
"914230/stls/Löffel LH.stl",
"914230/stls/Löffel RH.stl"
] | CC-BY | https://www.printables.com/model/914230 | data_0047.tar |
474254 | Silicone Nozzle Scrubber for Voron 2.4 | <p><strong>Nozzle scrubber for Voron 2.4</strong></p><p>I was having issues with oozing with my Revo Hot End and it was throwing off the Z Calibration plugin. So I designed this with parts I had to hand. Works a treat!</p><figure class="media"><oembed url="https://youtu.be/WMYM3zSAYtA"></oembed></figure><p><strong>BOM:... | [
"nozzles",
"voron",
"nozzlecleaner",
"voron2",
"voron24",
"voronmod"
] | 3D Printers > Voron Parts & Upgrades | [
"474254/images/image_1_compressed.jpg",
"474254/images/image_2_compressed.jpg"
] | [
"474254/stls/Nozzle Scrubber Kinematic Bed Spacer.stl",
"474254/stls/Nozzle Scrubber.stl"
] | GPL3.0 | https://www.printables.com/model/474254 | data_0047.tar |
1452090 | Silksong Hornet Shoes | <p>She got shoes on!!!<br><br><br>Used a bit of fabric to make her lil shirt</p> | [
"knight",
"hollowknight",
"hollow",
"hornet",
"silksong",
"silso"
] | Gadgets > Video Games | [
"1452090/images/image_1_compressed.jpg",
"1452090/images/image_2_compressed.jpg",
"1452090/images/image_3_compressed.jpg"
] | [
"1452090/stls/silsoshoes.stl",
"1452090/stls/silsoshoesshirt.stl",
"1452090/stls/silsoshoesver1.stl",
"1452090/stls/silsoshoesver2.stl",
"1452090/stls/silsoshoesver3.stl"
] | CC-BY | https://www.printables.com/model/1452090 | data_0047.tar |
847645 | Silueta Goku v1 | <h3>Silueta de Goku</h3><p>Diseño de sulieta de Goku pequeño. Dragon Ball.</p><p>Impreso en PLA</p><p>Características en la foto de Cura.</p> | [
"dragon",
"vector",
"silhouette",
"silueta",
"dragonball",
"goku"
] | Art & Design > 2D Plates & Logos | [
"847645/images/image_1_compressed.jpg",
"847645/images/image_2_compressed.jpg",
"847645/images/image_3_compressed.jpg"
] | [
"847645/stls/Goku2 (1).stl"
] | CC-BY | https://www.printables.com/model/847645 | data_0047.tar |
708801 | Silver Bullion Coin Container | <p>This is a container for 1-ounce silver bullion coins. It will fit a stack of 10 American Eagle silver coins, but other coins of the same or smaller diameter may also fit.</p><p>I printed with random seam position to avoid an ugly vertical seam. I would strongly recommend sanding the seams on the inside of the contai... | [
"holder",
"container",
"coin",
"silver",
"threads"
] | Household > Other House Equipment | [
"708801/images/image_1_compressed.jpg",
"708801/images/image_2_compressed.jpg",
"708801/images/image_3_compressed.jpg"
] | [
"708801/stls/Silver_Bullion_Holder_20pcs.stl",
"708801/stls/silver_coin_holder_v1.stl",
"708801/stls/silver_coin_holder_v2.stl",
"708801/stls/silver_coin_holder_v2_20pc.stl"
] | CC-BY | https://www.printables.com/model/708801 | data_0047.tar |
45171 | SIM Card Holder with Labels | <p>This is a SIM card holder with a label to keep them organized.<br>It takes a micro SIM and Mini-SIM.<br>The label area has indents to allow for a plain piece of paper with details of the SIM.</p><h3>Print instructions</h3><p>I printed with 0.15mm Layer Height in PLA using a stock prusa mini.<br>Tolerances are low so... | [
"organizer",
"holder",
"sim",
"minisim",
"microsim"
] | Gadgets > Portable Devices | [
"45171/images/image_1_compressed.jpg",
"45171/images/image_2_compressed.jpg",
"45171/images/image_3_compressed.jpg",
"45171/images/image_4_compressed.jpg",
"45171/images/image_5_compressed.jpg"
] | [
"45171/stls/sim-holder-v3.stl"
] | CC-BY | https://www.printables.com/model/45171 | data_0047.tar |
770673 | Sim Racing Pedals with Load Cell | <p>This is a basic set of 3D printed sim racing pedals using hall sensors for accelerator and clutch, and a load cell for the brake. I use the accelerator and brake almost daily for a little over a month as of the original posting - the clutch is (at this point) untested. The mechanics of the clutch should work, but I'... | [
"brake",
"simracing",
"sim",
"accelerator",
"pedals"
] | Gadgets > Video Games | [
"770673/images/image_1_compressed.jpg",
"770673/images/image_10_compressed.jpg",
"770673/images/image_11_compressed.jpg",
"770673/images/image_12_compressed.jpg",
"770673/images/image_13_compressed.jpg",
"770673/images/image_2_compressed.jpg",
"770673/images/image_3_compressed.jpg",
"770673/images/ima... | [
"770673/stls/Brake-ArmAnchor.stl",
"770673/stls/Brake-LoadCellMount-TopBrace.stl",
"770673/stls/Brake-LoadCellMount.stl",
"770673/stls/Brake-ModuleSide.stl",
"770673/stls/Brake-PedalArm.stl",
"770673/stls/Brake-PedalFace.stl",
"770673/stls/Brake-SpringSpacerDouble.stl",
"770673/stls/Clutch-ModuleSide.... | CC-BY | https://www.printables.com/model/770673 | data_0047.tar |
1394243 | Sim Racing Pedals with Load Cell V2 | <h3>Last update: 2025-09-20 (Notes at bottom)</h3><p>This is a basic set of 3D printed sim racing pedals using hall sensors for accelerator and clutch, and a load cell for the brake. I've used all three pedals for ~1 month, daily, as of the original posting. This is designed as an all-round improvement over my V1 pedal... | [
"simracing",
"sim",
"pedals"
] | Gadgets > Video Games | [
"1394243/images/image_1_compressed.jpg",
"1394243/images/image_2_compressed.jpg",
"1394243/images/image_3_compressed.jpg",
"1394243/images/image_4_compressed.jpg",
"1394243/images/image_5_compressed.jpg",
"1394243/images/image_6_compressed.jpg",
"1394243/images/image_7_compressed.jpg",
"1394243/images... | [
"1394243/stls/Enclosure_PCB.stl",
"1394243/stls/FreeSim-Pedals-Brake-LoadcellAnchor.stl",
"1394243/stls/FreeSim-Pedals-Brake-LoadcellBrace-Bottom.stl",
"1394243/stls/FreeSim-Pedals-Brake-LoadcellBrace-Top.stl",
"1394243/stls/FreeSim-Pedals-BrakeSpringSpacer.stl",
"1394243/stls/FreeSim-Pedals-Face-Brake.st... | CC-BY | https://www.printables.com/model/1394243 | data_0047.tar |
9846 | Simple 20x20x20mm cube | <p>Just a simple cube 20x20x20mm</p>
<h3>Print instructions</h3><p>Category: 3D Printing Tests</p> | [
"thingiverse"
] | 3D Printers > Test Models | [
"9846/images/image_1_compressed.jpg"
] | [
"9846/stls/20mm_cube.stl"
] | CC-BY | https://www.printables.com/model/9846 | data_0047.tar |
408096 | Simple 28BYJ-48 linear actuator | <p>Small and simple actuator using a 28BYJ-48 stepper motor. Re-used an existing helical gear and rack design and created a new base and mounting boss + pin. Needed a quick and dirty solution so this actuator is created using basic shapes in PrusaSlicer.</p><p>Printed using PETG and no supports. Just add a 28BYJ-48 and... | [] | Hobby & Makers > Mechanical Parts | [
"408096/images/image_1_compressed.jpg",
"408096/images/image_2_compressed.jpg",
"408096/images/image_3_compressed.jpg"
] | [
"408096/stls/Actuator v4.stl",
"408096/stls/Body.stl",
"408096/stls/Gear.stl",
"408096/stls/Rack.stl"
] | CC0 | https://www.printables.com/model/408096 | data_0047.tar |
1270559 | Simple 3-piece stand | <p>This is a simple stand that you can use to stand up plaques or pictures</p> | [
"stand"
] | Art & Design > Other Art & Designs | [
"1270559/images/image_1_compressed.jpg",
"1270559/images/image_2_compressed.jpg"
] | [
"1270559/stls/stand .stl"
] | CC0 | https://www.printables.com/model/1270559 | data_0047.tar |
51224 | Simple 5x USB Stand | <p>Wanted a simple or minimalistic USB holder for my desk. There are some designs - but I like it simple. So I created one to match my 5 Usb Sticks. Nothing special.</p>
<p>Colour is that beautiful DasFilament Blue Pearl.</p>
| [
"desk",
"stand",
"usb",
"stick"
] | Gadgets > Computers | [
"51224/images/image_1_compressed.jpg"
] | [
"51224/stls/usb_stand.stl"
] | CC-BY | https://www.printables.com/model/51224 | data_0047.tar |
271419 | Simple 8 bit MegaMan | <p>Simple 8 bit MegaMan</p> | [
"man",
"8bit",
"bit",
"mega",
"nes",
"megaman",
"8"
] | Art & Design > 2D Plates & Logos | [
"271419/images/image_1_compressed.jpg"
] | [
"271419/stls/megaman.stl"
] | CC-BY | https://www.printables.com/model/271419 | data_0047.tar |
104628 | Simple 90 degree bracket | <p>Needed a some corner brackets with a small adjustment for alignment.</p><p>Not required to be massively strong in tension so this design represents a very simple option.</p><p>Fusion360 file included for you to adjust as necessary.</p><p>Don't visit a store - print and be happy to be a maker.</p><p> </p> | [
"bracket",
"angle",
"cornerbracket",
"90degree"
] | Hobby & Makers > Mechanical Parts | [
"104628/images/image_1_compressed.jpg",
"104628/images/image_2_compressed.jpg",
"104628/images/image_3_compressed.jpg"
] | [
"104628/stls/simple_bracket v1.stl"
] | CC-BY | https://www.printables.com/model/104628 | data_0047.tar |
1562303 | Simple Arrow Bookmark - No Support - Fast Print | <p>Easy to print pointing bookmark to keep track of your reading by the exact line. </p><p>They require no support.</p><p><br>Please provide constructive feedback, so I can fix minor issues.<br>Thank You.</p> | [] | Hobby & Makers > Organizers | [
"1562303/images/image_1_compressed.jpg",
"1562303/images/image_2_compressed.jpg"
] | [
"1562303/stls/ArrowBookMark.stl"
] | CC0 | https://www.printables.com/model/1562303 | data_0047.tar |
145678 | Simple Bicycle Helmet Hook | <p>I made this hook to hang up the bicycle helmets. It's simple and strong. It can also be used to hang whatever else you want to.</p><p>Print on it's side no supports and thicker layer lines for more strength. </p> | [
"hook",
"hanger",
"bicycle",
"wallhook",
"wallhanger",
"bicyclehelmet"
] | Sports & Outdoor > Outdoor Sports | [
"145678/images/image_1_compressed.jpg",
"145678/images/image_2_compressed.jpg"
] | [
"145678/stls/Helmet_Hook-Part.stl"
] | CC-BY | https://www.printables.com/model/145678 | data_0047.tar |
756278 | Simple burger maker | <p>diametr 90 mm</p> | [
"kitchen",
"press",
"burger",
"hamburgerpress",
"hamburger"
] | Household > Kitchen | [
"756278/images/image_1_compressed.jpg"
] | [
"756278/stls/bottom.stl",
"756278/stls/top.stl"
] | CC0 | https://www.printables.com/model/756278 | data_0047.tar |
791634 | Simple Cabinet Door Latch | [
"door",
"cabinet",
"latch"
] | 3D Printers > Accessories | [
"791634/images/image_1_compressed.jpg"
] | [
"791634/stls/simpledoorlatch.stl"
] | CC-BY | https://www.printables.com/model/791634 | data_0047.tar | |
719001 | Simple Candle Wick Holder | <p>This 3D printable model is a simple wick holder for candles. It consists of a single part and is available in three different sizes (2mm, 3mm, 4mm) to accommodate wicks with different diameters.</p><p><strong>Print settings</strong></p><p>Material: PLA, PETG or ABS<br>Layer height: any<br>Filling: 15%<br>Supports: n... | [
"candle",
"diy",
"wick",
"stabilo"
] | Hobby & Makers > Tools | [
"719001/images/image_1_compressed.jpg",
"719001/images/image_2_compressed.jpg"
] | [
"719001/stls/Candle Wick Holder 12x1cm 2mm hole.stl",
"719001/stls/Candle Wick Holder 12x1cm 3mm hole.stl",
"719001/stls/Candle Wick Holder 12x1cm 4mm hole.stl"
] | CC-BY | https://www.printables.com/model/719001 | data_0047.tar |
413013 | Simple Cat toy | <p>I made a simple design for the Cat toy contest. This was inspired after I saw one of my cats chasing a piece of filament and realized having something with long stringy bits may be a good cat toy. Long story short the kitties loved it, just check the pictures!</p> | [
"toy",
"cat",
"kitty",
"cattoy"
] | Household > Pets | [
"413013/images/image_1_compressed.jpg",
"413013/images/image_2_compressed.jpg",
"413013/images/image_3_compressed.jpg"
] | [
"413013/stls/Cat Toy v1.stl"
] | CC0 | https://www.printables.com/model/413013 | data_0047.tar |
1276994 | Simple Core One Side Tray | <p>This is a simple tray that fits into the left side pocket of the Prusa Core One.</p><p>I used double-sided tape to attach mine, but you could also glue some magnets onto it if you want it to be removable.</p><p>The <i>.step</i> file has been provided if you'd like to make any edits.</p><p>Happy printing :)</p> | [
"prusa",
"storage",
"tray",
"one",
"core"
] | Hobby & Makers > Organizers | [
"1276994/images/image_1_compressed.jpg",
"1276994/images/image_2_compressed.jpg"
] | [
"1276994/stls/Simple Core One Tray.stl"
] | CC-BY | https://www.printables.com/model/1276994 | data_0047.tar |
269604 | Simple Customizable Tweezers (fast print!) | <p>Functional tweezers which you can customizable a bit!</p><p><strong>No supports required</strong> and can be printed in around 1 hour.</p><p>Print with 2 perimeters at 0.16 layer height, 2/3 bottom and top solid layers, 10% infill for the best results.</p><p>I have included .f3d and .step files so you can edit the m... | [
"tools",
"tweezers",
"tweezer"
] | Hobby & Makers > Tools | [
"269604/images/image_1_compressed.jpg",
"269604/images/image_2_compressed.jpg",
"269604/images/image_3_compressed.jpg",
"269604/images/image_4_compressed.jpg"
] | [
"269604/stls/S_tweezers.stl"
] | CC-BY | https://www.printables.com/model/269604 | data_0047.tar |
62504 | Simple Doll Table | <p>My wife asked that I create a toy table for the girls Barbie collection. This is the design she requested. Well at least it didn't take long to design...</p><p>Piper seemed quite pleased with it. </p><h3> </h3><p></p> | [
"toy",
"table",
"barbie",
"thingiverse"
] | Toys & Games > Action Figures & Statues | [
"62504/images/image_1_compressed.jpg",
"62504/images/image_2_compressed.jpg",
"62504/images/image_3_compressed.jpg",
"62504/images/image_4_compressed.jpg"
] | [
"62504/stls/SimpleBarbieTable.stl"
] | CC-BY | https://www.printables.com/model/62504 | data_0047.tar |
127759 | Simple door handle | <p>I couldn't find door handles that I liked, so I designed these simple handles. The STL file doesn't have any threads, so I included the STEP file so you can add your own.</p> | [] | Household > Living Room | [
"127759/images/image_1_compressed.jpg"
] | [
"127759/stls/simple_door_handle.stl"
] | CC0 | https://www.printables.com/model/127759 | data_0047.tar |
975140 | Simple Fast Stringing Test | <p>Simple stringing test. May need to be scaled up in the slicer. I've found that 5cm height works well. Based off but not directly copying other models in this category.</p> | [
"test",
"string",
"stringingtest"
] | 3D Printers > Test Models | [
"975140/images/image_1_compressed.jpg",
"975140/images/image_2_compressed.jpg",
"975140/images/image_3_compressed.jpg",
"975140/images/image_4_compressed.jpg"
] | [
"975140/stls/Simple Stringing Test.stl"
] | BSD | https://www.printables.com/model/975140 | data_0047.tar |
502149 | Simple flexible Griffin | <p>This is the V1 of my print-in-place griffin.</p><p>I tried to keep it simple so it could be printed in less than 1 hour; it printed in 1:12h in my Ender 2 Pro.</p><p>Of course, if you like this one, I'll add more details to it so it looks more like a griffin and not like a child's drawing.</p><p>Have a nice printing... | [
"flexible",
"printinplace",
"nosupport",
"simple",
"griffin"
] | Toys & Games > Other Toys & Games | [
"502149/images/image_1_compressed.jpg",
"502149/images/image_2_compressed.jpg",
"502149/images/image_3_compressed.jpg"
] | [
"502149/stls/Probably_a_Griffin.stl"
] | CC0 | https://www.printables.com/model/502149 | data_0047.tar |
827265 | Simple Friction Fit Tube / Coin Tube [Parametric] | <h3><strong>IMPORTANT: This will not work with Silk PLA, PLA with additives, or other filaments with poor layer adhesion. </strong><br> </h3><p>I designed this parametric tube to store my Dragon Coins, but they ended up working well for regular coins as well.<br><br>The tube uses the properties of layer lines... | [
"parametric",
"coin",
"storage",
"coins",
"tube",
"coinholder",
"coinstorage",
"parametricdesign",
"storagetube"
] | Hobby & Makers > Organizers | [
"827265/images/image_1_compressed.jpg",
"827265/images/image_2_compressed.jpg",
"827265/images/image_3_compressed.jpg"
] | [
"827265/stls/Coin Tube - Dragon Coins.stl",
"827265/stls/Coin Tube - US Dime.stl",
"827265/stls/Coin Tube - US Nickel.stl",
"827265/stls/Coin Tube - US Penny.stl",
"827265/stls/Coin Tube - US Quarter.stl"
] | CC0 | https://www.printables.com/model/827265 | data_0047.tar |
166952 | Simple garden plant marker | [
"sign",
"plant",
"marker",
"garden",
"gardening",
"balcony",
"balkon",
"cedulka",
"zahrada"
] | Household > Outdoor & Garden | [
"166952/images/image_1_compressed.jpg"
] | [
"166952/stls/cedulka.stl"
] | CC0 | https://www.printables.com/model/166952 | data_0047.tar | |
408146 | Simple Garden Sign | <p>This is a garden sign that you can print out labels or just use a marker. I would recommend to print in a suitable filament that is heat resistant to avoid melting in the hot sun.</p>
Category: Outdoor & Garden | [
"sign",
"flower",
"garden",
"thingiverse",
"vegetable"
] | Household > Outdoor & Garden | [
"408146/images/image_1_compressed.jpg",
"408146/images/image_2_compressed.jpg"
] | [
"408146/stls/Garden_Sign.stl"
] | CC-BY | https://www.printables.com/model/408146 | data_0047.tar |
1416700 | Simple gift box / present box - Christmas / Xmas decoration | <p>The models are very simple to print, no support is needed.</p><p>I applied some tolerance hence ribbons always fits boxes.</p><p>I recommend to <strong>glue </strong>Side ribbons to the box - it may ensure solid assembly :)</p><p>Print should be fine with standard settings however here you can find some specs I used... | [
"christmas",
"present",
"xmas",
"giftbox",
"presents",
"simpledesign",
"presentbox",
"giftboxes"
] | Seasonal designs > Winter & Christmas & New Year's | [
"1416700/images/image_1_compressed.jpg",
"1416700/images/image_2_compressed.jpg",
"1416700/images/image_3_compressed.jpg",
"1416700/images/image_4_compressed.jpg"
] | [
"1416700/stls/BowRibbon_Big.stl",
"1416700/stls/BowRibbon_Medium.stl",
"1416700/stls/BowRibbon_Small.stl",
"1416700/stls/Box_Big.stl",
"1416700/stls/Box_Medium.stl",
"1416700/stls/Box_Small.stl",
"1416700/stls/SideRibbons_Big.stl",
"1416700/stls/SideRibbons_Medium.stl",
"1416700/stls/SideRibbons_Sma... | CC0 | https://www.printables.com/model/1416700 | data_0047.tar |
1357052 | Simple handle for A1-mini silicone brush, for cleaning a hot nozzle | <p>These little silicone brushes are amazing for manually cleaning your nozzle, but need a handle (normally mounted somewhere for automatic cleaning on Bambu printers).</p><p>Here's the A1-<strong>mini</strong> brushes on Amazon, approx $1/ea: https://www.amazon.com/XIFOWE-Accessories-Wear-Resistant-Accumulation-... | [
"nozzle",
"brush",
"clean",
"silicone",
"a1mini"
] | 3D Printers > Accessories | [
"1357052/images/image_1_compressed.jpg",
"1357052/images/image_2_compressed.jpg"
] | [
"1357052/stls/simple_silicone_brush_handle.stl"
] | CC0 | https://www.printables.com/model/1357052 | data_0047.tar |
709505 | Simple Headphones desk holder | [
"headphone",
"desk",
"headphones",
"headphoneholder",
"headphonehanger",
"deskmount"
] | 3D Printers > Accessories | [
"709505/images/image_1_compressed.jpg",
"709505/images/image_2_compressed.jpg",
"709505/images/image_3_compressed.jpg",
"709505/images/image_4_compressed.jpg",
"709505/images/image_5_compressed.jpg"
] | [
"709505/stls/Body.stl",
"709505/stls/Longer Screw.stl",
"709505/stls/Screw.stl"
] | CC-BY | https://www.printables.com/model/709505 | data_0047.tar | |
809942 | Simple heart | <p>X, Y, Z</p><p>40x40x2</p> | [
"love",
"heart",
"simple"
] | Art & Design > 2D Plates & Logos | [
"809942/images/image_1_compressed.jpg"
] | [
"809942/stls/Plain_hearth.stl"
] | CC0 | https://www.printables.com/model/809942 | data_0047.tar |
129348 | Simple Heart Necklace | <p>Here you can see a simple heart with keychain or necklace ring. Source file to modify in OpenSCAD included.</p><p>You can adjust the height of the heart when you modify the line “<strong>linear_extrude(height = 10)</strong>”.<br><br>Feel free to modify it and do your own versions. Even with names or symbols inside i... | [
"model",
"keychain",
"heart",
"necklace",
"valentine",
"valentinesday",
"simple"
] | Art & Design > Other Art & Designs | [
"129348/images/image_1_compressed.jpg",
"129348/images/image_2_compressed.jpg",
"129348/images/image_3_compressed.jpg",
"129348/images/image_4_compressed.jpg",
"129348/images/image_5_compressed.jpg"
] | [
"129348/stls/heartwithring.stl",
"129348/stls/heart_half.stl"
] | GPL2.0 | https://www.printables.com/model/129348 | data_0047.tar |
172517 | Simple Hexasphericon | <p>A simple hexasphericon, taking an interesting path as it rolls along.</p><p>Requires minimum supports to print. Use a small layer height for smoothest rolling results. Higher infill is recommended, as more mass and more momentum will make the piece roll better. </p> | [
"toy",
"rolling",
"sphericon",
"hexasphericon"
] | Toys & Games > Other Toys & Games | [
"172517/images/image_1_compressed.jpg",
"172517/images/image_2_compressed.jpg"
] | [
"172517/stls/Hexasphericon.stl"
] | CC0 | https://www.printables.com/model/172517 | data_0047.tar |
378051 | Simple Honeycomb Note box / Memobox / Zettelbox | <p>Nothing too complicated - just a box for loose stack of note papers. But it was useful practice task on modelling a hexonal grill in Inventor.</p><p>Designed with inner space sized 90x90mm, can be easily scaled up or down for different papers. Prints without supports from PETG.</p><p>If there's not enough hexagons f... | [
"hexagon",
"office",
"honeycomb",
"notes",
"zettelbox"
] | Household > Office | [
"378051/images/image_1_compressed.jpg"
] | [
"378051/stls/Memobox 90x90.stl",
"378051/stls/Memobox 90x90_A.stl"
] | CC0 | https://www.printables.com/model/378051 | data_0047.tar |
790626 | Simple Hook | <p>I needed a simple hook for my kitchen apron. I designed this to be taped to the side of our fridge using one of those easy-to-remove Tesa strips.</p><p>Since this is fully customizable you could very well add a screw hole or two if you don't want to use tape.</p> | [
"hook",
"doublesidedtape"
] | Household > Kitchen | [
"790626/images/image_1_compressed.jpg"
] | [
"790626/stls/haken.stl"
] | CC-BY | https://www.printables.com/model/790626 | data_0047.tar |
375432 | Simple iPhone 12 mini Case | Remix of the honeycomb case from Thingiverse. I like the fitting so I made it solid. Also adjusted the camera window. | Download free 3D printable STL models | [
"iphonecase",
"iphone12mini"
] | 3D Printers > Accessories | [
"375432/images/image_1_compressed.jpg",
"375432/images/image_2_compressed.jpg"
] | [
"375432/stls/Iphone12MiniCase.stl"
] | CC-BY | https://www.printables.com/model/375432 | data_0047.tar |
319852 | Simple Jet Plane | Simple Jet Plane | Download free 3D printable STL models | [
"plane",
"jet"
] | Toys & Games > Vehicles | [
"319852/images/image_1_compressed.jpg"
] | [
"319852/stls/Jet_plane.stl"
] | CC-BY | https://www.printables.com/model/319852 | data_0047.tar |
1226038 | Simple Key Cover | <p>Pause at the begin of layer 21, then insert the key :)</p><p> </p><p>For proper functionality, I recommend first printing a test piece (only the first 20 layers) to ensure the key fits perfectly. Then, adjust the scale as needed. For example, one of my keys fit perfectly, but for another, I had to slightly redu... | [
"color",
"cover",
"key",
"simple"
] | Gadgets > Other Gadgets | [
"1226038/images/image_1_compressed.jpg",
"1226038/images/image_2_compressed.jpg",
"1226038/images/image_3_compressed.jpg"
] | [
"1226038/stls/key_cover (1).stl"
] | CC0 | https://www.printables.com/model/1226038 | data_0047.tar |
391798 | Simple keychain letters | <p><strong>Simple keychain letters</strong></p><p>For a better effect, print in two colors. They are perfect for a gift!</p><p> </p><p>I reuploaded these keychain letters to have them available here at printables.com too.</p> | [] | Art & Design > Other Art & Designs | [
"391798/images/image_1_compressed.jpg",
"391798/images/image_2_compressed.jpg",
"391798/images/image_3_compressed.jpg"
] | [
"391798/stls/A.stl",
"391798/stls/B.stl",
"391798/stls/C.stl",
"391798/stls/D.stl",
"391798/stls/E.stl",
"391798/stls/F.stl",
"391798/stls/G.stl",
"391798/stls/H.stl",
"391798/stls/I.stl",
"391798/stls/J.stl",
"391798/stls/K.stl",
"391798/stls/L.stl",
"391798/stls/M.stl",
"391798/stls/N.st... | CC-BY | https://www.printables.com/model/391798 | data_0047.tar |
169421 | Simple Lack Stacker | <p>Inspired by the way the <a href="https://www.printables.com/model/17-original-prusa-i3-mk3-enclosure-ikea-lack-table-pr">Prusa Lack Enclosure</a> aligns the top of the enclosure to the base table, I created a similar setup so that I could securely stack a third lack below my enclosure without screwing it together.</... | [
"ikea",
"ikealack",
"ikealackenclosure"
] | 3D Printers > Other Printer Parts & Upgrades | [
"169421/images/image_1_compressed.jpg",
"169421/images/image_2_compressed.jpg"
] | [
"169421/stls/LackStacker.stl",
"169421/stls/LackStacker_LegPiece.stl",
"169421/stls/LackStacker_TopPiece.stl"
] | CC0 | https://www.printables.com/model/169421 | data_0047.tar |
777729 | Simple Laptop or Tablet Charging Stand | <p>Used it for years, simple and it works </p> | [
"charging",
"chargingdock",
"chargingstation",
"chargingstand"
] | Gadgets > Portable Devices | [
"777729/images/image_1_compressed.jpg"
] | [
"777729/stls/Laptop Tablet Charging Stand.stl"
] | CC-BY | https://www.printables.com/model/777729 | data_0047.tar |
967826 | simple lego bricks | [] | Learning > Other 3D Objects for Learning | [
"967826/images/image_1_compressed.jpg",
"967826/images/image_2_compressed.jpg",
"967826/images/image_3_compressed.jpg"
] | [
"967826/stls/lego 1x1 - high.stl",
"967826/stls/lego 2x2 - high.stl",
"967826/stls/lego 2x4 - high.stl"
] | CC0 | https://www.printables.com/model/967826 | data_0047.tar | |
283621 | Simple Lock for Sliding Door | <p>We have a sliding door with a broken lock. Also we have a cat with escapist abilities hence we required a lock on the door, and while we get a definitive lock for the sliding door, I came up with this simple lock that only requires double side tape to put it in place.</p><p>It Is designed to “self lock” when closed ... | [
"door",
"lock",
"sliding"
] | Household > Home Decor | [
"283621/images/image_1_compressed.jpg",
"283621/images/image_2_compressed.jpg",
"283621/images/image_3_compressed.jpg"
] | [
"283621/stls/self_door_lock v8.stl"
] | CC-BY | https://www.printables.com/model/283621 | data_0047.tar |
1469417 | Simple Locking Stitch Marker | <p>This simple, tiny stitch marker locks securely into place to help keep track of your stitches. Each stitch marker measures only half an inch (13 mm) long, and one gram of filament will print 16 of them. Want a larger size? Just scale up the print file!</p><p>To lock the stitch marker, simply bend the longer leg arou... | [
"knitting",
"stitchmarker"
] | Hobby & Makers > Tools | [
"1469417/images/image_1_compressed.jpg",
"1469417/images/image_2_compressed.jpg",
"1469417/images/image_3_compressed.jpg",
"1469417/images/image_4_compressed.jpg"
] | [
"1469417/stls/Stitch Marker 16x.stl",
"1469417/stls/Stitch Marker.stl"
] | CC-BY | https://www.printables.com/model/1469417 | data_0047.tar |
199530 | Simple magnetic stud finder uses a round 10mm by 3mm thick magnet | <p>Simple magnetic stud finder uses a round 10mm by 3mm thick magnet. Printed in PLA with 5% infill. A magnet of 10mm diameter and 3mm thick will push in tightly with some force to the bottom of this. If its to loose then add some super glue first so the magnet is glued in place. (probably wise ... | [
"tool",
"magnetic",
"stud",
"studfinder"
] | Hobby & Makers > Tools | [
"199530/images/image_1_compressed.jpg",
"199530/images/image_2_compressed.jpg",
"199530/images/image_3_compressed.jpg",
"199530/images/image_4_compressed.jpg",
"199530/images/image_5_compressed.jpg"
] | [
"199530/stls/Stud Finder.stl"
] | CC-BY | https://www.printables.com/model/199530 | data_0047.tar |
74044 | Simple Medicine Chest Cabinet Shelves | <h3>Storage shelves for your medicine chest/cabinet.</h3><h3>Utilized unused areas of your medicine cabinet by sliding a simple shelf in place. Suddenly you have a place to put your items that are not that tall without sacrificing floorspace inside the cabinet.</h3><h3>Features</h3><ul><li>Simple design</li><li>Mix &am... | [
"organizer",
"holder",
"shelves",
"thingiverse",
"toothbrushholder",
"medicinebox",
"storageshelves",
"shaverstand",
"medicinecabinet",
"medicinechest",
"plasticshelves"
] | Household > Bathroom | [
"74044/images/image_1_compressed.jpg",
"74044/images/image_2_compressed.jpg",
"74044/images/image_3_compressed.jpg",
"74044/images/image_4_compressed.jpg",
"74044/images/image_5_compressed.jpg",
"74044/images/image_6_compressed.jpg",
"74044/images/image_7_compressed.jpg",
"74044/images/image_8_compres... | [
"74044/stls/Shelf_9.5x4x4.125.stl",
"74044/stls/Shelf_9.5x4x7.stl"
] | CC-BY | https://www.printables.com/model/74044 | data_0047.tar |
357806 | Simple Minecraft Block Night Light Less than $8.00 | <p>Wanted to get a nice night glow for kids that might have issues with darkness. Wanted mild light that won't inhibit their sleep patterns. This model gives you the choice to get the favorite block for your Minecraft kid.</p><p>I used an Amazon sourced light that uses C7 bulb. If you want a brighter light, just upgrad... | [
"decoration",
"light",
"minecraft",
"blocks",
"nightlight",
"decorative"
] | Toys & Games > Other Toys & Games | [
"357806/images/image_1_compressed.jpg",
"357806/images/image_2_compressed.jpg",
"357806/images/image_3_compressed.jpg",
"357806/images/image_4_compressed.jpg",
"357806/images/image_5_compressed.jpg",
"357806/images/image_6_compressed.jpg",
"357806/images/image_7_compressed.jpg"
] | [
"357806/stls/Base.stl",
"357806/stls/Inside.stl",
"357806/stls/Outside.stl"
] | CC0 | https://www.printables.com/model/357806 | data_0047.tar |
725544 | Simple Missing Square Illusion | <p>Missing Square Illusion </p><p>Simple print</p> | [
"toy",
"math",
"square",
"illusion"
] | Learning > Math | [
"725544/images/image_1_compressed.jpg",
"725544/images/image_2_compressed.jpg",
"725544/images/image_3_compressed.jpg"
] | [
"725544/stls/Puzzle-A.stl",
"725544/stls/Puzzle-B.stl",
"725544/stls/Puzzle-base.stl",
"725544/stls/Puzzle-C.stl",
"725544/stls/Puzzle-D.stl"
] | CC0 | https://www.printables.com/model/725544 | data_0047.tar |
198713 | Simple Motor Visualizer | [] | 3D Printers > Other Printer Parts & Upgrades | [
"198713/images/image_1_compressed.jpg"
] | [
"198713/stls/Evis_arrow1.stl",
"198713/stls/Evis_cov1.stl"
] | CC0 | https://www.printables.com/model/198713 | data_0047.tar | |
758638 | Simple multi coloured rose | <p>A simple rose that is easy to print. The Print uses about 8 grams of filament. <br>I have created a few different version to allow for different ways of producing a multi colour printing.</p><p><strong>Rose Multiple Height</strong></p><figure class="image"><img src="https://media.printables.com/media/prints/758... | [
"rose",
"valentine",
"valentinesday"
] | Art & Design > Other Art & Designs | [
"758638/images/image_1_compressed.jpg",
"758638/images/image_2_compressed.jpg",
"758638/images/image_3_compressed.jpg",
"758638/images/image_4_compressed.jpg"
] | [
"758638/stls/rose_multiple_heights.stl",
"758638/stls/rose_single_height_3mm.stl",
"758638/stls/rose_single_height_4mm.stl",
"758638/stls/rose_split_multicolour_3mm.stl",
"758638/stls/rose_split_multicolour_4mm.stl"
] | CC-BY | https://www.printables.com/model/758638 | data_0047.tar |
27130 | Simple Napkin Holder | <p>My gf wanted a napkin holder so I made her this one which has a semi-interesting design. Very easy to print as well.</p>
<h3>Print instructions</h3><p>print with the base of the napkin on the base of the printer, no supports, I recommend .2 layer height</p> | [
"holder",
"napkin"
] | Household > Kitchen | [
"27130/images/image_1_compressed.jpg"
] | [
"27130/stls/napkin-holder.stl"
] | CC0 | https://www.printables.com/model/27130 | data_0047.tar |
795608 | Simple no holes IKEA multifunctional handle | <p>Simple no holes IKEA multifunctional handle, multiple sizes, can be used in vertical or horizontal position. For vertical position the inside needs to be coated with something non slippery.</p><p>Can be used as hanger.</p><p>The idea is to have the grip just enough to stay in place without scratching the furniture.&... | [
"ikea",
"handle",
"hanger",
"smastad"
] | Household > Bedroom | [
"795608/images/image_1_compressed.jpg",
"795608/images/image_2_compressed.jpg",
"795608/images/image_3_compressed.jpg",
"795608/images/image_4_compressed.jpg"
] | [
"795608/stls/cuier_ikea_10mm.stl",
"795608/stls/cuier_ikea_20mm.stl",
"795608/stls/cuier_ikea_30mm.stl"
] | CC-BY | https://www.printables.com/model/795608 | data_0047.tar |
158210 | Simple nozzle block | <p>This is a super simple way to organize your nozzles instead of having them in loose zip-bags.</p><p>The threads are a bit tight and requires a tool to fit the nozzles the first couple of times. This haven't been any problem for me personally since I store my tool and my nozzles in the same place and every time i nee... | [
"nozzle",
"nozzles",
"nozzleholder",
"nozzleboard",
"nozzlebox"
] | 3D Printers > Accessories | [
"158210/images/image_1_compressed.jpg",
"158210/images/image_2_compressed.jpg"
] | [
"158210/stls/Nozzle block.stl"
] | CC-BY | https://www.printables.com/model/158210 | data_0047.tar |
1058982 | Simple one-screw hook (parametric) | <p>You can tweak the shape through fusion360 by modifying its parameters.</p><p> </p><p><i><strong>Printing information:</strong></i></p><p>Normally no supports are needed, but if you change the parameters or if you want to be safe use tree supports that will support the tip of the hook.</p> | [
"parametric",
"hook",
"fusion360",
"screw",
"onescrew"
] | Hobby & Makers > Organizers | [
"1058982/images/image_1_compressed.jpg",
"1058982/images/image_2_compressed.jpg"
] | [
"1058982/stls/parametric_one_screw_hook.stl"
] | CC-BY | https://www.printables.com/model/1058982 | data_0047.tar |
254209 | Simple Oral-B iO Stand | <p>Nothing special. Just print it ;-)</p> | [
"toothbrush",
"oral",
"io"
] | Household > Bathroom | [
"254209/images/image_1_compressed.jpg"
] | [
"254209/stls/Oral-B iO Stand.stl"
] | CC0 | https://www.printables.com/model/254209 | data_0047.tar |
578372 | Simple Plant Pot Coaster (Size Guide) | <p>I liked the model @Michael_31764 made so much, that I wanted to make them in different sizes. However, scaling them properly without guessing was hard. So I made a size guide for the model for scaling!</p><p>In the CAD picture, the outer construct line (taller) is the max pot size. The inner construct line (shorter)... | [
"pot",
"parametric",
"plant",
"flower",
"coaster",
"scalable"
] | Household > Outdoor & Garden | [
"578372/images/image_1_compressed.jpg",
"578372/images/image_2_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/578372 | data_0047.tar |
485209 | Simple Planter Tray / Untertopf 11cm | Simple Planter Tray / Untertopf with a diameter of 11cm | Download free 3D printable STL models | [
"planter",
"simple"
] | Household > Outdoor & Garden | [
"485209/images/image_1_compressed.jpg"
] | [
"485209/stls/Untertopf.stl"
] | CC-BY | https://www.printables.com/model/485209 | data_0047.tar |
1034592 | simple raspberry pi 4 case with fan | <p>a simple raspberry pi case with different top ends to choose from. it is compatible with 40 and 30 mm fans and a heatsink!</p> | [
"fan",
"raspberry",
"pi",
"simple"
] | Gadgets > Computers | [
"1034592/images/image_1_compressed.jpg",
"1034592/images/image_2_compressed.jpg",
"1034592/images/image_3_compressed.jpg"
] | [
"1034592/stls/Pi_case_lower_bigger_SD_cutout.stl",
"1034592/stls/Pi_Case_Upper_30mm_fan.stl",
"1034592/stls/Pi_case_Upper_all_cutouts.stl",
"1034592/stls/Pi_Case_Upper_solid.stl",
"1034592/stls/Pi_Case_Upper_Tall.stl"
] | GPL3.0 | https://www.printables.com/model/1034592 | data_0047.tar |
131375 | Simple Ribbed Box | <p>This is a simplification of my original <a href="https://www.printables.com/model/129904-interlocking-boxes">Interlocking Boxes</a>.</p><p>Use 0% infill and no solid top layers. I recommend spiral vase mode, with tall layers and with perimeter extrusions at least 1.2mm wide. Note that the ribs in this design keep th... | [] | Hobby & Makers > Organizers | [
"131375/images/image_1_compressed.jpg"
] | [
"131375/stls/simple-ribbed-box.stl"
] | BSD | https://www.printables.com/model/131375 | data_0047.tar |
676401 | Simple Ruler (15 cm) | [
"ruler"
] | Gadgets > Portable Devices | [
"676401/images/image_1_compressed.jpg",
"676401/images/image_2_compressed.jpg"
] | [
"676401/stls/simple ruller.stl"
] | CC0 | https://www.printables.com/model/676401 | data_0047.tar | |
117835 | simple shaft for spool holders on Lack enclosure V2 | <p>Print on end with your choice of filament.</p> | [
"spoolholder",
"ikealackenclosure",
"shaft"
] | 3D Printers > Accessories | [
"117835/images/image_1_compressed.jpg",
"117835/images/image_2_compressed.jpg",
"117835/images/image_3_compressed.jpg",
"117835/images/image_4_compressed.jpg"
] | [
"117835/stls/shaft.stl"
] | CC-BY | https://www.printables.com/model/117835 | data_0047.tar |
777364 | Simple Shim | <p>I needed shims for my worktables and benches in the shop. Simple shims that fit the task. Printed at the width of dimensional lumber. Printed at 100% with PLA. I have used them for several weeks under heavy tables with good results.</p> | [
"shim"
] | Household > Garage | [
"777364/images/image_1_compressed.jpg",
"777364/images/image_2_compressed.jpg"
] | [
"777364/stls/Workbench Shim (1).stl"
] | CC0 | https://www.printables.com/model/777364 | data_0047.tar |
1268296 | simple skadis pen and tool holder, no support | <p>A simple pen and tool holder for IKEA Skadis.
</p><p>No support required, the maximum overhang is 30°.</p><p> </p> | [
"organizer",
"penholder",
"toolholder",
"skadis",
"skadisholder"
] | Hobby & Makers > Organizers | [
"1268296/images/image_1_compressed.jpg",
"1268296/images/image_2_compressed.jpg",
"1268296/images/image_3_compressed.jpg",
"1268296/images/image_4_compressed.jpg",
"1268296/images/image_5_compressed.jpg",
"1268296/images/image_6_compressed.jpg"
] | [
"1268296/stls/stiftbecher v4.stl"
] | CC-BY | https://www.printables.com/model/1268296 | data_0047.tar |
343662 | Simple Skyrim quest marker bookmark | Simple Skyrim quest marker bookmarks. There is a smaller outside quest marker and a larger inside quest marker | Download free 3D printable STL models | [
"skyrim",
"remix",
"bookmarks"
] | Gadgets > Video Games | [
"343662/images/image_1_compressed.jpg",
"343662/images/image_2_compressed.jpg",
"343662/images/image_3_compressed.jpg"
] | [
"343662/stls/Skyrim quest bookmark small.stl",
"343662/stls/Skyrim quest door bookmark.stl"
] | CC0 | https://www.printables.com/model/343662 | data_0047.tar |
811378 | Simple small ball | [
"ball"
] | Gadgets > Other Gadgets | [
"811378/images/image_1_compressed.jpg",
"811378/images/image_2_compressed.jpg"
] | [
"811378/stls/simple_small_ball.stl"
] | CC0 | https://www.printables.com/model/811378 | data_0047.tar | |
969335 | Simple Spirograph Kit | <p>This is a simple spirograph print, very fun for kids and adults alike. To use, place a small gear inside the big ring gear, take a pen and trace in circles! </p> | [
"toy",
"spirograph",
"spiral",
"gear",
"drawing",
"helper",
"stencil"
] | Art & Design > 2D Plates & Logos | [
"969335/images/image_1_compressed.jpg"
] | [
"969335/stls/30 Teeth.stl",
"969335/stls/40 Teeth.stl",
"969335/stls/60 Teeth.stl",
"969335/stls/Main Ring.stl"
] | CC-BY | https://www.printables.com/model/969335 | data_0047.tar |
73673 | Simple Stackable Storage Container | <p><strong>Description</strong></p><p>A simple storage container which can be stacked. Pick one of the compartiment you prefer, together with a container. You can then stack them, and join them with container pens (two on each side). You can further secure the join with the provided container pen lock, zip-tie, or put ... | [
"organizer",
"container",
"storage",
"drawer",
"smallpartsstorage",
"stackablecontainer"
] | Hobby & Makers > Organizers | [
"73673/images/image_1_compressed.jpg",
"73673/images/image_2_compressed.jpg",
"73673/images/image_3_compressed.jpg",
"73673/images/image_4_compressed.jpg",
"73673/images/image_5_compressed.jpg"
] | [
"73673/stls/storage-box_1-compartiment-tray.stl",
"73673/stls/storage-box_2-compartiment-tray.stl",
"73673/stls/storage-box_4-compartiment-tray.stl",
"73673/stls/storage-box_container-cover.stl",
"73673/stls/storage-box_container-pen-lock.stl",
"73673/stls/storage-box_container-pen.stl",
"73673/stls/sto... | CC-BY | https://www.printables.com/model/73673 | data_0047.tar |
650116 | Simple sword for DUMMY 13 figure | <p>Simple one-handed sword for DUMMY 13 figure. </p><p> </p><p><strong>Print setting</strong></p><ul><li>0.4mm or smaller nozzle</li><li>0.16 or smaller layer height </li><li>no supports</li><li>default infill</li><li>any rigid material</li></ul> | [
"sword",
"handheld"
] | Toys & Games > Action Figures & Statues | [
"650116/images/image_1_compressed.jpg"
] | [
"650116/stls/DUMMY13_sword.stl"
] | CC-BY | https://www.printables.com/model/650116 | data_0047.tar |
240749 | Simple Sword Rack / Hanger / Bracket for Daisho Katana Wakizashi | <p>I needed a wall-mounted hanger for a new daisho set that I bought, so i designed this. I thought most of the existing models seemed overly complicated or over-built. These are quick to print (about one hour and 40 minutes each), and are built to hold swords with up to about a 3" tsuba (which is pretty st... | [
"display",
"sword",
"katana"
] | Art & Design > Wall-mounted | [
"240749/images/image_1_compressed.jpg",
"240749/images/image_2_compressed.jpg",
"240749/images/image_3_compressed.jpg"
] | [
"240749/stls/SwordRackV4.stl"
] | CC-BY | https://www.printables.com/model/240749 | data_0047.tar |
987317 | Simple T-Virus Model | <p>Simple T-Virus Helix with base from Resident Evil for Ø3cm glass tubes and length ~12cm.<br>Can be scaled to fit different glass containers.<br>"HelixBase_Tolerance" added (there is a range of glass tubes with slightly thicker glass)<br>"HelixModel_Tolerance" added (smaller base of the model, also for thicker glass ... | [
"evil",
"resident",
"virus",
"glass",
"helix",
"tvirus"
] | Costumes & Accessories > Props | [
"987317/images/image_1_compressed.jpg",
"987317/images/image_2_compressed.jpg"
] | [
"987317/stls/HelixBase.stl",
"987317/stls/HelixBase_Tolerance.stl",
"987317/stls/HelixModel.stl",
"987317/stls/HelixModel_Tolerance.stl"
] | GPL2.0 | https://www.printables.com/model/987317 | data_0047.tar |
209107 | Simple table top spool holder |
<p>This is a remix of Filamentry's ultimate spool holder: <a href="https://goo.gl/tskKCZ">https://goo.gl/tskKCZ</a></p>
<p>It didn't print well on my printer to hold together properly so I re-designed it with two different parts.</p>
<p>The left part have a threaded stud that fit into the right part and they are bot... | [
"spool",
"spoolholder",
"bearing",
"608",
"thingiverse"
] | 3D Printers > Accessories | [
"209107/images/image_1_compressed.jpg",
"209107/images/image_2_compressed.jpg",
"209107/images/image_3_compressed.jpg",
"209107/images/image_4_compressed.jpg",
"209107/images/image_5_compressed.jpg",
"209107/images/image_6_compressed.jpg"
] | [
"209107/stls/Left_holder.stl",
"209107/stls/nut.stl",
"209107/stls/One_set.stl",
"209107/stls/Right_holder.stl"
] | CC-BY | https://www.printables.com/model/209107 | data_0047.tar |
460219 | Simple test piece for the Honeycomb storage wall. | <p>This is a small part of the overall Honeycomb wall that can print quickly to test the “fit” of the wall attachments. I found I preferred a more “snug” fit for my wall, so I print this with Cura using the “Walls→Horizontal Expansion” setting to make the attachments fit a little more tightly.</p><p>I found changing th... | [
"honeycomb"
] | 3D Printers > Test Models | [
"460219/images/image_1_compressed.jpg"
] | [
"460219/stls/wall-honeycomb-testfit.stl"
] | CC0 | https://www.printables.com/model/460219 | data_0047.tar |
932635 | Simple Tie/Guy Line Tensioner | [] | Household > Outdoor & Garden | [
"932635/images/image_1_compressed.jpg"
] | [
"932635/stls/Tie Tensioner 5mm.stl"
] | CC0 | https://www.printables.com/model/932635 | data_0047.tar | |
72268 | Simple Tool holder for Prusa MINI | <p>We have designed a holder for gathering the tools included in Prusa MINI, so we'll share information. It is recommended to manufacture with a resin with a certain degree of stickiness such as ABS and PETG, and it is recommended to carry out test printing to improve the dimensional accuracy before making a prototype.... | [] | 3D Printers > Accessories | [
"72268/images/image_1_compressed.jpg",
"72268/images/image_2_compressed.jpg",
"72268/images/image_3_compressed.jpg"
] | [
"72268/stls/holder_hex-wrench_prusa-mini_fy13.stl",
"72268/stls/holder_hex-wrench_prusa-mini_fy14.stl",
"72268/stls/holder_hex-wrench_prusa-mini_fy15.stl"
] | CC0 | https://www.printables.com/model/72268 | data_0047.tar |
442632 | Simple Toothpick | <p>When it comes to tooth picks, I have always loved the ones that usually are thin and flat at the end. Usually only found them in the combo floss/picks that half of it folds in the middle to reveal the pick. I decided to finally make, test and post some 3D Printable ones I can just have available.</p><p>Best to keep ... | [
"pick",
"tooth",
"toothpick"
] | Healthcare > Home Medical Tools | [
"442632/images/image_1_compressed.jpg",
"442632/images/image_2_compressed.jpg",
"442632/images/image_3_compressed.jpg"
] | [
"442632/stls/Simple Toothpick.stl"
] | CC0 | https://www.printables.com/model/442632 | data_0047.tar |
814011 | Simple Tray | <p>Universal tray to throw stuff in.</p> | [
"organizer",
"3d",
"storage",
"workshop",
"tray",
"simple"
] | Hobby & Makers > Organizers | [
"814011/images/image_1_compressed.jpg",
"814011/images/image_2_compressed.jpg",
"814011/images/image_3_compressed.jpg",
"814011/images/image_4_compressed.jpg",
"814011/images/image_5_compressed.jpg",
"814011/images/image_6_compressed.jpg",
"814011/images/image_7_compressed.jpg"
] | [
"814011/stls/Workshop tray.stl"
] | GPL2.0 | https://www.printables.com/model/814011 | data_0047.tar |
143193 | Simple under the desk headphone/headset holder/Kopfhörerhalterung | <p><i><strong>Please leave a ♥ Like if this print was helpful to you :-) </strong></i></p><p>A very simple headphone holder design that is super easy to print and prevents the headphones from falling down. This is mounted under the table, where I prefer to keep my headphones.</p><p>There are two holes for screws a... | [
"headphone",
"headset",
"headphoneholder",
"thingiverse",
"headphonehanger",
"headsetholder"
] | Household > Office | [
"143193/images/image_1_compressed.jpg",
"143193/images/image_2_compressed.jpg"
] | [
"143193/stls/headphone-holder.stl"
] | CC0 | https://www.printables.com/model/143193 | data_0047.tar |
166898 | Simple Universal Horizontal Phone Stand |
<p>Just a simple generic phone or small tablet holder. Should work fine for most small to big phones and maybe some tablets as well. Easy print. I've printed many of these for myself and my kids.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><strong... | [
"phonestand",
"phone",
"smartphone",
"smartphonestand",
"thingiverse",
"mobilephonestand",
"phoneholder"
] | Gadgets > Portable Devices | [
"166898/images/image_1_compressed.jpg",
"166898/images/image_2_compressed.jpg",
"166898/images/image_3_compressed.jpg",
"166898/images/image_4_compressed.jpg",
"166898/images/image_5_compressed.jpg",
"166898/images/image_6_compressed.jpg",
"166898/images/image_7_compressed.jpg"
] | [
"166898/stls/Mobilstativ.stl"
] | CC-BY | https://www.printables.com/model/166898 | data_0047.tar |
44248 | Simple Wallet | <p>This wallet is a great option to add to you EDC collection and will look great with everything else you keep in your pocket while keeping a slim and comfortable profile.</p>
<p>This is a very easy and simple wallet to print and use. This model is printed with no support and with no assembly. The only thing you need ... | [
"minimal",
"support",
"wallet",
"easy",
"minimalist",
"pocket",
"edc",
"nosupport",
"simple",
"slim",
"everydaycarry",
"minimaldesign",
"minimalwallet"
] | Fashion > Men | [
"44248/images/image_1_compressed.jpg",
"44248/images/image_10_compressed.jpg",
"44248/images/image_2_compressed.jpg",
"44248/images/image_3_compressed.jpg",
"44248/images/image_4_compressed.jpg",
"44248/images/image_5_compressed.jpg",
"44248/images/image_6_compressed.jpg",
"44248/images/image_7_compre... | [
"44248/stls/Simple Wallet more Simple.stl"
] | CC-BY | https://www.printables.com/model/44248 | data_0047.tar |
110962 | Simple Z-Height (First Layer Calibration) sqaure | <p>The most useful and easiest way to adjust your z-height.</p> | [
"first",
"firstlayercalibration",
"firstlayer",
"firstlayertest"
] | 3D Printers > Test Models | [
"110962/images/image_1_compressed.jpg"
] | [
"110962/stls/FLC Sqaure.stl"
] | CC0 | https://www.printables.com/model/110962 | data_0047.tar |
1158728 | Simple zipper pull replacement | [
"zipper",
"zip",
"zipperpull"
] | Hobby & Makers > Other Ideas | [
"1158728/images/image_1_compressed.jpg"
] | [
"1158728/stls/zip v1.stl"
] | CC-BY | https://www.printables.com/model/1158728 | data_0047.tar | |
435377 | Simpler bases for gridfinity enhanced vase bins | <p>I like the enhanced vase bins from here - <a href="https://www.printables.com/model/353012-gridfinity-enhanced-vase-bins-wth-labels-90-mod">https://www.printables.com/model/353012-gridfinity-enhanced-vase-bins-wth-labels-90-mod</a> - but the bases use too much filament. I made a reduced filament model using openscad... | [
"gridfinity"
] | Hobby & Makers > Organizers | [
"435377/images/image_1_compressed.jpg"
] | [
"435377/stls/gridBase.stl"
] | CC-BY | https://www.printables.com/model/435377 | data_0047.tar |
184933 | Simplest Extruder Visualizer | <p>Print in any color or plastic you choose, it's simple after-all. Use one of the spare magnets included with your Prusa printer. Two heights are provided to match the spare magnets, 10mm and 20mm. In the photo, the 10mm is shown.</p><p>To assemble, simply press the magnet into the slot and stick the visualizer to the... | [
"extruder",
"extruderindicator",
"simple",
"extrudervisualizer"
] | 3D Printers > Other Printer Parts & Upgrades | [
"184933/images/image_1_compressed.jpg"
] | [
"184933/stls/SimplestExtruderVisualizer-10mm.stl",
"184933/stls/SimplestExtruderVisualizer-20mm.stl"
] | CC0 | https://www.printables.com/model/184933 | data_0047.tar |
1130040 | Simplified filament clip and clips holder | <p>Remix of these models:</p><p><a href="https://www.printables.com/model/96792-filament-clip-holder">https://www.printables.com/model/96792-filament-clip-holder</a></p><p><a href="https://www.printables.com/model/84113-simple-universal-filament-clip-v3">https://www.printables.com/model/84113-simple-universal-filament-... | [
"filament",
"clip",
"filamentclip"
] | 3D Printers > Accessories | [
"1130040/images/image_1_compressed.jpg",
"1130040/images/image_2_compressed.jpg",
"1130040/images/image_3_compressed.jpg",
"1130040/images/image_4_compressed.jpg"
] | [
"1130040/stls/filament clip.stl",
"1130040/stls/filament holder with base.stl",
"1130040/stls/filament holder.stl"
] | GPL3.0 | https://www.printables.com/model/1130040 | data_0047.tar |
61121 | Simplified Phone Holder by xanoy | <p><strong>Basic parameters:</strong></p><p>Phone holding lenght: 72.6 mm<br>Dimensions: 72.6x83.3x64 mm<br>Supports: not required (bridge)<br> </p> | [
"holder",
"stand",
"phone"
] | Gadgets > Portable Devices | [
"61121/images/image_1_compressed.jpg",
"61121/images/image_2_compressed.jpg"
] | [
"61121/stls/simplified_phone_holder.stl"
] | CC0 | https://www.printables.com/model/61121 | data_0047.tar |
142124 | simplified straight train rail | <p>Simplified lego city train straight track rail for easier handling and faster printing.</p><p>Should be printed with supports.</p> | [
"railway",
"lego",
"track",
"rail",
"train",
"straight"
] | Toys & Games > Building Toys | [
"142124/images/image_1_compressed.jpg",
"142124/images/image_2_compressed.jpg"
] | [
"142124/stls/lego city rail straight v2.stl",
"142124/stls/lego city rail straight.stl"
] | GPL3.0 | https://www.printables.com/model/142124 | data_0047.tar |
904932 | Simplistic Laptop Stand | <p>Say hello to the latest addition to my workspace: an elegant 3D printed laptop stand that I designed and printed using my Ender 3 v2! After using the stand for a while, I can confirm it works great.</p><p><a href="https://andycao.me/blog/diy-laptop-stand-with-3d-printing">Full article</a> instruction on my website.<... | [
"stand",
"laptopstand",
"macbookstand",
"laptopholders"
] | 3D Printers > Accessories | [
"904932/images/image_1_compressed.jpg",
"904932/images/image_2_compressed.jpg",
"904932/images/image_3_compressed.jpg",
"904932/images/image_4_compressed.jpg",
"904932/images/image_5_compressed.jpg",
"904932/images/image_6_compressed.jpg"
] | [
"904932/stls/v2-stand-macbookpro-2022-m2.stl"
] | CC-BY | https://www.printables.com/model/904932 | data_0047.tar |
24112 | Simply Hook | <p>This is simply hook for clothes,towels etc.. I printed it from PETG with 100% infill or 99 perimeters (doesn´t matters). I recomend 0,2 mm layer.</p><h3>Print instructions</h3><h3>Category: Household Supplies Print Settings</h3><p><strong>Printer Brand:</strong> Prusa</p><p><strong>Printer:</strong> I3 MK3S</p><p><s... | [
"thingiverse"
] | Household > Other House Equipment | [
"24112/images/image_1_compressed.jpg"
] | [
"24112/stls/hook_v2.stl"
] | CC-BY | https://www.printables.com/model/24112 | data_0047.tar |
730821 | Sinden Lightgun Holster Replacement | <p>This is a replacement for a Sinden Lightgun holster. It is modeled after the optional accessory offered directly from Sinden.</p>
<p>Hopefully, it will help you replace your damaged or missing holster.</p>
Category: Video Games | [
"holster",
"thingiverse",
"sinden"
] | Gadgets > Other Gadgets | [
"730821/images/image_1_compressed.jpg"
] | [
"730821/stls/Sinden_Holster.stl"
] | CC-BY | https://www.printables.com/model/730821 | data_0047.tar |
188429 | Single AA to D Cell Battery Adapter |
<p>bendrexl designed a nice AA to D cell adapter, however, I did not have a "brass fastener".</p>
<p>I do have a bunch of loose screws. I popped the file into tinkercad and replaced the square hole with a 3mm screw hole.</p>
<p>Simply put a 3Mx12 screw in the end so that it touches the tip of the AA battery.</p>
<h3... | [
"battery",
"thingiverse",
"batteryholder",
"aabattery",
"aabatteryholder",
"dbattery",
"dbatteryholder"
] | Hobby & Makers > Electronics | [
"188429/images/image_1_compressed.jpg",
"188429/images/image_2_compressed.jpg",
"188429/images/image_3_compressed.jpg"
] | [
"188429/stls/Battery_AA_to_D.stl"
] | CC-BY | https://www.printables.com/model/188429 | data_0047.tar |
734907 | Single Dosing Cup Holder for Eureka Mignon Silenzio | [
"cupholder",
"eureka",
"singledose"
] | Household > Kitchen | [
"734907/images/image_1_compressed.jpg",
"734907/images/image_2_compressed.jpg",
"734907/images/image_3_compressed.jpg",
"734907/images/image_4_compressed.jpg",
"734907/images/image_5_compressed.jpg",
"734907/images/image_6_compressed.jpg",
"734907/images/image_7_compressed.jpg"
] | [
"734907/stls/Cup-Holder.stl",
"734907/stls/Silenzio-Adapter.stl"
] | CC-BY | https://www.printables.com/model/734907 | data_0047.tar | |
121741 | Single hand Joy-Con adapter (Right hand) | <p>An easy to print adapter that allows the user to hold and operate both Joy-cons with one hand... This time, focusing on right handed players!</p><p>Demo video: </p><figure class="media"><oembed url="https://www.youtube.com/watch?v=U_T3WYMJuWw"></oembed></figure> | [
"nintendo",
"nintendoswitch",
"accessibility"
] | Healthcare > Home Medical Tools | [
"121741/images/image_1_compressed.jpg"
] | [
"121741/stls/MainDrtV1.stl"
] | CC-BY | https://www.printables.com/model/121741 | data_0047.tar |
721758 | Single Key Switch | <p>Simple little switch holder. Measures 20mm by 20mm by 12mm.</p> | [
"toy",
"switch",
"keyboard",
"stim"
] | Hobby & Makers > Other Ideas | [
"721758/images/image_1_compressed.jpg"
] | [
"721758/stls/Single_Key.stl"
] | GPL3.0 | https://www.printables.com/model/721758 | data_0047.tar |
376798 | Single line infinity Cube | <p>3D Cube made out of one line!<br>Size: 60 x 60 x 60 mm<br>5 mm thick square tube with 1 mm chamfer.</p><p>You can print it with minimal supports at the first 5-8 mm height <br>Layer height 0,2 mm<br>Infill 15%</p><p>Have fun with printing this and please share your prints and experiences!</p><p>Feedback is also... | [
"3d",
"design",
"art",
"infinity",
"sculpture",
"fidget",
"cube",
"mathematical",
"hypercube",
"singleline",
"singlelineart",
"3dsculpture",
"line",
"4d",
"infinitycube"
] | Art & Design > Other Art & Designs | [
"376798/images/image_1_compressed.jpg",
"376798/images/image_2_compressed.jpg",
"376798/images/image_3_compressed.jpg",
"376798/images/image_4_compressed.jpg",
"376798/images/image_5_compressed.jpg"
] | [
"376798/stls/Single line cube.stl"
] | CC-BY | https://www.printables.com/model/376798 | data_0047.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.