model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
15783 | Thumb knob 1/4-20 | <p>This will work on 1/4-20 threaded rod or bolts. I made it for use as tool less nuts.</p>
<p>The A360 view..<br/>
<a href="https://a360.co/2B3z8Lm">https://a360.co/2B3z8Lm</a></p>
<h3>Print instructions</h3><p>Category: Parts</p> | [
"knob",
"threaded",
"thingiverse",
"1420thread"
] | Hobby & Makers > Mechanical Parts | [
"15783/images/image_1_compressed.jpg",
"15783/images/image_2_compressed.jpg"
] | [
"15783/stls/14_20_knob.stl"
] | CC-BY | https://www.printables.com/model/15783 | data_0048.tar |
468709 | Thumb knob for M3 hex head screw | <h4>Application</h4><p>Use this know for whichever M3 hex head screw you need to tighten by hand, without a screw driver. The knob takes 6mm from the length of the screw, which means that a M3x16 screw replaces a M3x10 with a screw driver head. </p><p>Feel free to remix it for whatever other purpose, I have put it... | [
"screw",
"thumbscrew"
] | Hobby & Makers > Mechanical Parts | [
"468709/images/image_1_compressed.jpg",
"468709/images/image_2_compressed.jpg"
] | [
"468709/stls/M3 hex head thumb knob.stl"
] | CC0 | https://www.printables.com/model/468709 | data_0048.tar |
697219 | Thumb Thimble | <p>Nothing special. Normal thimbles never fit me because I have big hands, so I made this primitive thimble for myself, maybe it will help you too with your sewing & embroidery projects. Inner diameter is 20mm.</p><p>2024-01-10-13-06-Thimble file added, updated model with to make it easier to push needles with tip.... | [
"thimble",
"sewingaid",
"sewingtools"
] | Hobby & Makers > Tools | [
"697219/images/image_1_compressed.jpg",
"697219/images/image_2_compressed.jpg",
"697219/images/image_3_compressed.jpg",
"697219/images/image_4_compressed.jpg"
] | [
"697219/stls/2023-12-28-08-34-Thimble.stl",
"697219/stls/2024-01-10-13-06-Thimble.stl"
] | CC0 | https://www.printables.com/model/697219 | data_0048.tar |
45075 | Thumb Throttle Lever for Rad Power Bikes | <p>This is a reworked version from an stl I found on thingiverse, I didn't like how the thumb throttle got in the way when I'm not using it, so I made it fit all way to left side of throttle and angled it 90º to the left.</p>
<h3>Print instructions</h3><p>No supports needed.<br/>
I used PLA and printed it at .2mm layer... | [
"power",
"rad",
"radrover",
"ebikes",
"radrunner",
"radpowerbikes"
] | Sports & Outdoor > Other Sports | [
"45075/images/image_1_compressed.jpg",
"45075/images/image_2_compressed.jpg",
"45075/images/image_3_compressed.jpg",
"45075/images/image_4_compressed.jpg"
] | [
"45075/stls/thumb-clasp.stl",
"45075/stls/thumb-throttle.stl"
] | CC0 | https://www.printables.com/model/45075 | data_0048.tar |
862005 | thunderdome logo | <p>logo from id t thunderdome</p> | [
"logo",
"thunderdome"
] | Art & Design > 2D Plates & Logos | [
"862005/images/image_1_compressed.jpg"
] | [
"862005/stls/thunderdome logo stl.stl"
] | CC0 | https://www.printables.com/model/862005 | data_0048.tar |
1351355 | ThunderEye picture HueForge | <p>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm</p><p>The Model is <strong>170x170mm</strong> in size<br>You may print at higher layer heights below the Min Depth of 0.48mm<br>The Max Depth is<strong> 1.8mm </strong>and the Actual Depth is 1.8mm</p><p><strong>Filaments Used:</strong><b... | [
"eye",
"thunder",
"hueforge"
] | Art & Design > 2D Plates & Logos | [
"1351355/images/image_1_compressed.jpg",
"1351355/images/image_2_compressed.jpg",
"1351355/images/image_3_compressed.jpg",
"1351355/images/image_4_compressed.jpg"
] | [
"1351355/stls/ThunderEye_Front_170x170.stl",
"1351355/stls/ThunderEye_Front_200x200.stl"
] | CC0 | https://www.printables.com/model/1351355 | data_0048.tar |
748360 | Tic Tac Toe Board | <p>Enjoy a simple game of <strong>Tic Tac Toe</strong>.</p><ul><li>2 Board Options</li><li>Plus x5</li><li>circles x5</li></ul><p><br><strong>Dimensions:</strong> <br>Board - 158mm x 166mm</p><p>o's - 42mm x 42mmx,</p><p>x's - 42mm x 42mm </p><p> </p> | [
"game",
"tictactoe"
] | Toys & Games > Board Games | [
"748360/images/image_1_compressed.jpg",
"748360/images/image_2_compressed.jpg",
"748360/images/image_3_compressed.jpg"
] | [
"748360/stls/board1.stl",
"748360/stls/board2.stl",
"748360/stls/O.stl",
"748360/stls/X.stl"
] | CC-BY | https://www.printables.com/model/748360 | data_0048.tar |
26017 | Tic-Tac-Toe | <p>Little travel game. Requirement 5 cross and 4 wheels.</p>
<p>Happy playing</p>
| [] | Toys & Games > Board Games | [
"26017/images/image_1_compressed.jpg"
] | [
"26017/stls/hraci_pole.stl",
"26017/stls/hraci_pole_kryt.stl",
"26017/stls/kolecko.stl",
"26017/stls/krizek.stl"
] | CC0 | https://www.printables.com/model/26017 | data_0048.tar |
772094 | Tic-Tac-Tub | <p>Its tic tac tub! An amazing game that can be played in the bathtub or on the table!</p><p>I made this to experiment with buoyancy in 3d printed parts and learned some stuff. It took a few tries to get the print settings that would work. I rounded out all the edges so it is safe for child use.</p><p>Print settings I ... | [
"bathtub",
"bathtubchildtoy",
"bathtubtoy"
] | Toys & Games > Board Games | [
"772094/images/image_1_compressed.jpg",
"772094/images/image_2_compressed.jpg",
"772094/images/image_3_compressed.jpg"
] | [
"772094/stls/TicTacTubToy.stl",
"772094/stls/TicTacTubToyFrame.stl",
"772094/stls/TicTacTubToyO.stl",
"772094/stls/TicTacTubToyX.stl"
] | CC0 | https://www.printables.com/model/772094 | data_0048.tar |
183996 | Ticket to Ride bottom tray |
<p>Remix of the excellent Ticket to Ride tray by Wile</p>
<p><a href="https://www.thingiverse.com/thing:2560851">https://www.thingiverse.com/thing:2560851</a></p>
<p>My game is the North American version and the bottom tray was a tad too big to fit. I also wanted the top tray to sit flush with the board so the train... | [
"game",
"board",
"boardgame",
"thingiverse",
"tickettoride"
] | Toys & Games > Other Toys & Games | [
"183996/images/image_1_compressed.jpg",
"183996/images/image_2_compressed.jpg",
"183996/images/image_3_compressed.jpg",
"183996/images/image_4_compressed.jpg",
"183996/images/image_5_compressed.jpg"
] | [
"183996/stls/Cars.stl",
"183996/stls/ttr_bottom.stl"
] | CC-BY | https://www.printables.com/model/183996 | data_0048.tar |
787724 | TicTacToe Game | <p>Form plate is supposed to be glued to the base plate. Print 5x cross and 5x the circle.</p> | [
"ring",
"game",
"circle",
"kids",
"kid",
"boardgame",
"toe",
"cross",
"family",
"play",
"kidstoys",
"tictactoe",
"friendship",
"tac",
"tic",
"familygames"
] | Toys & Games > Board Games | [
"787724/images/image_1_compressed.jpg",
"787724/images/image_2_compressed.jpg",
"787724/images/image_3_compressed.jpg",
"787724/images/image_4_compressed.jpg",
"787724/images/image_5_compressed.jpg"
] | [
"787724/stls/Base_plate.stl",
"787724/stls/Circle.stl",
"787724/stls/Cross.stl",
"787724/stls/Form_plate.stl"
] | CC-BY | https://www.printables.com/model/787724 | data_0048.tar |
871362 | Tie Fighter Support for Google Home Mini | <p>This model uses the side wings from <a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.thingiverse.com/CaiotE">CaiotE</a> which can be found <a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.thingiverse.com/thing:5164614/files">here</... | [
"mount",
"googlehomemini"
] | Hobby & Makers > Electronics | [
"871362/images/image_1_compressed.jpg",
"871362/images/image_2_compressed.jpg",
"871362/images/image_3_compressed.jpg",
"871362/images/image_4_compressed.jpg",
"871362/images/image_5_compressed.jpg"
] | [
"871362/stls/googlehomemini_tie_fighter_front.stl",
"871362/stls/googlehomemini_tie_fighter_front_panel_1.stl",
"871362/stls/googlehomemini_tie_fighter_front_panel_2.stl",
"871362/stls/googlehomemini_tie_fighter_sidepanel_2.stl",
"871362/stls/googlehomemini_tie_fighter_side_panel_1.stl",
"871362/stls/goog... | GPL3.0 | https://www.printables.com/model/871362 | data_0048.tar |
497721 | Tie Holder | <p>An easy-to-print tie holder for your closet. Holds up to 3 ties withouth any problems.</p><p>I recommend printing it with 3 or 4 walls to make it stronger and 20% infill, this may be a bit overkill but I prefer this than worrying all the time about moving stuff in my closet and breaking it accidentally.</p> | [
"tie",
"closet",
"organization"
] | Household > Bedroom | [
"497721/images/image_1_compressed.jpg",
"497721/images/image_2_compressed.jpg",
"497721/images/image_3_compressed.jpg"
] | [
"497721/stls/Tie Holder.stl"
] | CC-BY | https://www.printables.com/model/497721 | data_0048.tar |
719177 | Tier Heart Earrings With variations | <p>Tier Heart Earrings With variations.</p><p> </p><p><br>6 different hearts to combine any way you choose.</p><p> </p><p>You are only limited by your imagination.</p><p> </p><p>Check out my other Valentine Earrings:</p><p><a href="https://www.printables.com/model/719187-3-tier-heart-with-stick">3 Tier h... | [
"earrings",
"earring",
"ear",
"ring",
"rings",
"heart",
"hearts",
"heartvalentinesday",
"ears",
"valentines",
"vantine"
] | Fashion > Other Fashion Accessories | [
"719177/images/image_1_compressed.jpg",
"719177/images/image_2_compressed.jpg",
"719177/images/image_3_compressed.jpg",
"719177/images/image_4_compressed.jpg",
"719177/images/image_5_compressed.jpg",
"719177/images/image_6_compressed.jpg",
"719177/images/image_7_compressed.jpg",
"719177/images/image_8... | [
"719177/stls/Large heart double hoop.stl",
"719177/stls/Large heart inside hoop and double hoop.stl",
"719177/stls/Large heart inside hoop and top hoop.stl",
"719177/stls/Large heart single hoop.stl",
"719177/stls/Small heart double hoop.stl",
"719177/stls/Small heart single hoop.stl"
] | CC-BY | https://www.printables.com/model/719177 | data_0048.tar |
3262 | TIG Cup Size Tungsten Stick-out Gauge (US) | <p>A quick and simple way to set your tungsten stick out length.</p>
<p>I wanted a quick way to set my tungsten stick out length each time so I quickly modeled this in Blender and sliced it. Should go without say but to point out the obvious anyway... don't stick hot tungsten in this. I usually have a few already sharp... | [
"welding",
"tig",
"tungsten"
] | Gadgets > Other Gadgets | [
"3262/images/image_1_compressed.jpg",
"3262/images/image_2_compressed.jpg",
"3262/images/image_3_compressed.jpg"
] | [
"3262/stls/tungsten-stick-out-gauge.stl"
] | CC-BY | https://www.printables.com/model/3262 | data_0048.tar |
214410 | Tight And Secure Extruder Bowden Tube Clip | <p>This Bowden tube clip gets rid of the loose fit the original clip has at the extruder.</p><p>My Ender 3 v2 had a lot of play at the fitting so I found a <a href="https://www.thingiverse.com/thing:4846002">model</a> that is designed to fix it. It worked very well but I had a lot of issues printing it and it would alw... | [
"extruder",
"tube",
"3dprinter",
"bowden",
"ender3",
"thingiverse"
] | 3D Printers > Accessories | [
"214410/images/image_1_compressed.jpg",
"214410/images/image_2_compressed.jpg",
"214410/images/image_3_compressed.jpg",
"214410/images/image_4_compressed.jpg"
] | [
"214410/stls/clip.stl",
"214410/stls/extruderBowdenTubeClip.stl"
] | CC-BY | https://www.printables.com/model/214410 | data_0048.tar |
1353594 | Tighter Fitting Rewinding Spoolholder Mount for COREBOXX Premium. | <p>This is a remix of the rewinding spoolholder mounts for the <a href="https://www.printables.com/model/1178997-prusa-core-one-coreboxx-premium">COREBOXX Premium.</a></p><p>I found the original spoolholder mounts held the spoolholders fairly loosely, and spools would wobble when the printer was running. Inspired by <a... | [] | 3D Printers > Prusa Parts & Upgrades | [
"1353594/images/image_1_compressed.jpg",
"1353594/images/image_2_compressed.jpg",
"1353594/images/image_3_compressed.jpg",
"1353594/images/image_4_compressed.jpg"
] | [
"1353594/stls/SpoolStation_All_TighterFitting.stl",
"1353594/stls/SpoolStation_Left_TighterFitting.stl",
"1353594/stls/SpoolStation_Middle_TighterFitting.stl",
"1353594/stls/SpoolStation_Right_TighterFitting.stl"
] | GPL3.0 | https://www.printables.com/model/1353594 | data_0048.tar |
1342701 | Tilt maze (print in place) | <p>Just print bottom-up (the bridges are small but if you want to make sure they look even - set the bridge angle to 45 degrees. You can also change the filament color on layer right after printing the marble. The only tricky part is the marble - make sure you have good first layer adhesion.</p><p>PS. I know - there's ... | [
"maze",
"printinplace",
"tilt"
] | Toys & Games > Other Toys & Games | [
"1342701/images/image_1_compressed.jpg"
] | [
"1342701/stls/Maze_game v4.stl"
] | CC0 | https://www.printables.com/model/1342701 | data_0048.tar |
909802 | Tina2 / MP Cadet enclosure | <p>Enclosure for the Tina2(S)/ MP Cadet.</p><p>The door with the window is designed for a 1mm glass/plexiglass. The print is made to be paused and the glass inserted. You can use the template as a guide to cut the glass/plexiglass. <strong>PLA doesn't stick to Plexiglass. I ran into that issue but resolved it by gluing... | [
"enclosure",
"tina2",
"tina2s"
] | 3D Printers > Accessories | [
"909802/images/image_1_compressed.jpg",
"909802/images/image_2_compressed.jpg",
"909802/images/image_3_compressed.jpg"
] | [
"909802/stls/Door Basic.stl",
"909802/stls/Door Knob.stl",
"909802/stls/Door Ventilated.stl",
"909802/stls/Door with Window.stl",
"909802/stls/Enclosure Basic.stl",
"909802/stls/Enclosure Ventilated Magnetic Cover.stl",
"909802/stls/Enclosure Ventilated.stl",
"909802/stls/Enclosure With Door.stl",
"... | CC-BY | https://www.printables.com/model/909802 | data_0048.tar |
325695 | Tinderblox tweezers | <p>My friend broke his Tinderblox tweezers so I modeled them. I've uploaded Fusion360 (.f3d) file for easy edit. </p><p>Game: https://www.alleycatgames.com/tinderblox</p> | [
"tweezers",
"tinderblox"
] | Toys & Games > Board Games | [
"325695/images/image_1_compressed.jpg",
"325695/images/image_2_compressed.jpg"
] | [
"325695/stls/tweezers.stl"
] | CC-BY | https://www.printables.com/model/325695 | data_0048.tar |
822048 | Tinmorry 250G Spool | <p>A spool similar to the Tinmorry 250g cardboard filament spool in two halves that can be threaded together to hold and use small quantities of items such as diskless filament, silicone wire or solder wire etc.</p> | [
"spool",
"filamentspool",
"tinmorry"
] | 3D Printers > Accessories | [
"822048/images/image_1_compressed.jpg",
"822048/images/image_2_compressed.jpg",
"822048/images/image_3_compressed.jpg"
] | [
"822048/stls/Tinmorry 250G Spool A.stl",
"822048/stls/Tinmorry 250G Spool B.stl"
] | CC-BY | https://www.printables.com/model/822048 | data_0048.tar |
503365 | Tintin | <p>I found this model on thingyverse.</p><p>It's well made. Didn't have to change anything to make it to my liking.</p><p>I printed it @11cm high on my mk3s+, with Polyterra cotton white</p><p>Just finished painting it, thought I'd share.</p><p>It's a fun model to paint.</p> | [
"toy",
"comics",
"figure",
"comic",
"miniature",
"model",
"kuifje"
] | Art & Design > Sculptures | [
"503365/images/image_1_compressed.jpg",
"503365/images/image_2_compressed.jpg",
"503365/images/image_3_compressed.jpg",
"503365/images/image_4_compressed.jpg"
] | [
"503365/stls/tintin_print_body.stl",
"503365/stls/tintin_print_full.stl",
"503365/stls/tintin_print_head.stl"
] | CC-BY | https://www.printables.com/model/503365 | data_0048.tar |
1352222 | Tiny Dino – FREE COMMERCIAL USE - Easy Quick Fast | <p><i><strong>FREE commercial uses - Sell this model and only this model for free!!!</strong></i></p><p> </p><p><i><strong>DO NOT LIFT ABOVE THE BUILD PLATE OR IT WILL FAIL, MAKE SURE ITS ALWAYS BELOW THE THE BUILD PLATE SLIGHTLY SO IT SITS FLAT.</strong></i></p><p> </p><p><strong>Tiny Dino – Prehistoric Prin... | [
"toy",
"tiny",
"boy",
"cute",
"fast",
"funny",
"dinosaur",
"dino",
"kids",
"gift",
"fun",
"easy",
"free",
"home",
"quick",
"girl",
"nosupport",
"commercial",
"sale",
"sell",
"gifty"
] | Tabletop Miniatures > Characters & Monsters | [
"1352222/images/image_1_compressed.jpg",
"1352222/images/image_2_compressed.jpg",
"1352222/images/image_3_compressed.jpg",
"1352222/images/image_4_compressed.jpg"
] | [
"1352222/stls/Tiny-Dino-SG3D.stl"
] | CC0 | https://www.printables.com/model/1352222 | data_0048.tar |
1254899 | Tiny duck with bunny ears | <p>A tiny duck wearing bunny ears. Would make a great little addition to Easter eggs.</p> | [
"tiny",
"bunny",
"easter",
"duck",
"ears"
] | Seasonal designs > Spring & Easter | [
"1254899/images/image_1_compressed.jpg",
"1254899/images/image_2_compressed.jpg"
] | [
"1254899/stls/easter duck.stl"
] | CC-BY | https://www.printables.com/model/1254899 | data_0048.tar |
405722 | Tiny Epic Vikings insert | <p>This is my take on insert for Tiny Epic Vikings board game. I have tried to squeeze everything from main game and Ragnarok expansion into one box.</p><p>My solution can hold all content of this game, but lid will be lifted by roughly 10mm, or you can store only one game board and then lid will be lifted only by 2-3m... | [
"boardgame",
"insert",
"boardgameinserts",
"boardgameinsert",
"boxinsert",
"boardgameorganizer",
"tinyepic",
"tinyepicvikings"
] | Toys & Games > Board Games | [
"405722/images/image_1_compressed.jpg",
"405722/images/image_2_compressed.jpg",
"405722/images/image_3_compressed.jpg",
"405722/images/image_4_compressed.jpg",
"405722/images/image_5_compressed.jpg",
"405722/images/image_6_compressed.jpg"
] | [
"405722/stls/Board_holder_double.stl",
"405722/stls/Board_holder_single.stl",
"405722/stls/Cairns_villages.stl",
"405722/stls/Runes.stl",
"405722/stls/Tokens.stl",
"405722/stls/Viking 4x.stl"
] | CC-BY | https://www.printables.com/model/405722 | data_0048.tar |
793748 | Tiny frame for 7.5" E-Paper | <p>I was not able to find a wall frame for LaskaKit 7,5" E-Paper display that can be printed on Prusa Mini. So I designed one. </p><p>It is inspired by original frame <a href="https://github.com/LaskaKit/ESPink/tree/main/3D/Case-7.5.">https://github.com/LaskaKit/ESPink/tree/main/3D/Case-7.5.</a> I rearranged compo... | [
"frame",
"mini",
"7",
"prusamini",
"eink",
"ramecek",
"laskakit",
"zivyobraz"
] | Hobby & Makers > Electronics | [
"793748/images/image_1_compressed.jpg",
"793748/images/image_2_compressed.jpg",
"793748/images/image_3_compressed.jpg",
"793748/images/image_4_compressed.jpg",
"793748/images/image_5_compressed.jpg",
"793748/images/image_6_compressed.jpg",
"793748/images/image_7_compressed.jpg"
] | [
"793748/stls/body.stl",
"793748/stls/frame.stl",
"793748/stls/leg.stl"
] | CC-BY | https://www.printables.com/model/793748 | data_0048.tar |
965423 | Tiny hook for rubber band loom - fast print | <p>We keep losing our small hooks that come with rubber band bracelet kits. So if you are in the same boat, here is a quick and easy print.</p><p>I recommend using PETG, but PLA should be fine too. I printed mine at 0.1 mm layer height with solid infill using a 0.4 nozzle (0.1 mm DETAIL preset on MK4) - took about 7 mi... | [
"hook",
"loom",
"rubberband",
"rainbowloom",
"rubberbandloom",
"rubberbands"
] | Hobby & Makers > Other Ideas | [
"965423/images/image_1_compressed.jpg",
"965423/images/image_2_compressed.jpg",
"965423/images/image_3_compressed.jpg",
"965423/images/image_4_compressed.jpg"
] | [
"965423/stls/Rubber band hook-v2 v7.stl"
] | CC-BY | https://www.printables.com/model/965423 | data_0048.tar |
218988 | Tiny OpenScad Compliant Grabber | <p>This is a remix of Cisco's Flexy Pliers<br><br>Its all done in OpenScad so it can be adjusted<br>I also removed the pins and replaced with compliant mech and it seems to work :)<br><br><br>This is a smaller version I made see <a href="https://www.printables.com/model/218810-openscad-compliant-grabber">https://www.pr... | [
"gripper",
"compliantmechanism"
] | Toys & Games > Other Toys & Games | [
"218988/images/image_1_compressed.jpg"
] | [
"218988/stls/small_compliant_grabber.stl",
"218988/stls/small_compliant_grabber_mini.stl"
] | CC-BY | https://www.printables.com/model/218988 | data_0048.tar |
1387899 | Tiny Rack (upgradable 6" inch modular server rack) | <p>Easily expandable as your rack grows.</p><p>Fully 3d printable.</p><p>Only need m3 bolts and nuts (no heat inserts).</p><p>Use any 6" rack panels with it.<br><br>Accessories - https://www.printables.com/model/1387902-tiny-rack-accessories-for-upgradable-6-inch-modula/comments</p> | [
"rack",
"network",
"serverrack",
"networkrack",
"homelab",
"minilab"
] | Gadgets > Computers | [
"1387899/images/image_1_compressed.jpg",
"1387899/images/image_2_compressed.jpg",
"1387899/images/image_3_compressed.jpg"
] | [
"1387899/stls/tiny 6- rack - 1-2 bank panel with round pattern.stl",
"1387899/stls/tiny 6- rack - 1-2 blank panel.stl",
"1387899/stls/tiny 6- rack - 1U blank panel with round pattern.stl",
"1387899/stls/tiny 6- rack - 1U blank panel.stl",
"1387899/stls/tiny 6- rack - 2U panel with round pattern.stl",
"138... | CC0 | https://www.printables.com/model/1387899 | data_0048.tar |
355329 | Tiny Tessellating Factory | <p>A tiny tessellating factory. </p><p>Maybe it makes PLA filament to make other tiny tessellating factories….</p><p> </p><p>Settings used for samples:</p><p>Layer height: 0.12mm</p><p>Walls: 3</p><p>Infill: Adaptive cubic 15% (Any infill setting should work, this was a default value)</p><p> </p> | [] | Art & Design > Other Art & Designs | [
"355329/images/image_1_compressed.jpg",
"355329/images/image_2_compressed.jpg",
"355329/images/image_3_compressed.jpg",
"355329/images/image_4_compressed.jpg",
"355329/images/image_5_compressed.jpg",
"355329/images/image_6_compressed.jpg",
"355329/images/image_7_compressed.jpg"
] | [
"355329/stls/EmptyPlate.stl",
"355329/stls/Factory_01.stl",
"355329/stls/Factory_02.stl"
] | CC0 | https://www.printables.com/model/355329 | data_0048.tar |
674163 | Tiny Watering Can | <h3>A little watering can for those little plants ;)</h3>
<p>There are two versions included:</p>
<p>The only difference between both are the shape of the water outlet.</p>
<p>Print seetings:</p>
<p>layer size: 0,2mm</p>
<p>infil: 30%</p>
<p>nozzle size: 0,4mm</p>
<hr/>
<p>Filament: SkyBlue by BASF Ultrafuse:</p>
<p>Ex... | [
"toy",
"watering",
"green",
"plants",
"thingiverse",
"plantwatering"
] | Household > Outdoor & Garden | [
"674163/images/image_1_compressed.jpg",
"674163/images/image_2_compressed.jpg",
"674163/images/image_3_compressed.jpg",
"674163/images/image_4_compressed.jpg",
"674163/images/image_5_compressed.jpg",
"674163/images/image_6_compressed.jpg",
"674163/images/image_7_compressed.jpg",
"674163/images/image_8... | [
"674163/stls/Spray_Head.stl",
"674163/stls/Watering_Can_Version_1.stl",
"674163/stls/Watering_Can_Version_2.stl"
] | CC-BY | https://www.printables.com/model/674163 | data_0048.tar |
516850 | Tipi - Tent Connector | <p>Tipi top connector for 20mm diameter wood stick</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p><a href="http://amzn.to/2rqZ6Uo" rel="ugc nofollow" target="_blank">Prusa Clone</a></p></div>
<p><strong>Rafts:</strong>... | [
"thingiverse"
] | Toys & Games > Building Toys | [
"516850/images/image_1_compressed.jpg",
"516850/images/image_2_compressed.jpg"
] | [
"516850/stls/Tipi_Connector.stl"
] | CC0 | https://www.printables.com/model/516850 | data_0048.tar |
404807 | Tipp-Kick goal wall (Torwand) | <p>Simple goal wall to practice your target skills in Tipp-Kick. No need for multi color prints, just set a color change at the appropriate layer heights in your slicer. A pre-sliced profile for Prusa i3 MK3s and PETG is also attached. The color series for the color change is:</p><ol><li>color of backboard (any color y... | [
"thingiverse",
"tippkick",
"goalwall",
"torwand"
] | Toys & Games > Other Toys & Games | [
"404807/images/image_1_compressed.jpg",
"404807/images/image_2_compressed.jpg",
"404807/images/image_3_compressed.jpg",
"404807/images/image_4_compressed.jpg",
"404807/images/image_5_compressed.jpg"
] | [
"404807/stls/Torwand_v3_Torwand_v3_Korper1.stl",
"404807/stls/Torwand_v3_Torwand_v3_Torstuetze_links_1_Korper1.stl",
"404807/stls/Torwand_v3_Torwand_v3_Torstuetze_rechts_1_Korper1.stl"
] | CC-BY | https://www.printables.com/model/404807 | data_0048.tar |
1296245 | Tirador de mueble | <p>-Este es un tirador sencillo y estético, el cual es muy facil de imprimir, el cual puede ser impreso de lado, aunque la terminación de un lado va a ser un poco distinto que el otro, asique una opción posible es imprimirlo con los apoyos hacia arriba.</p><p>-Las medidas son 15 cm de largo, 1,5cm de grosor, 1cm de alt... | [
"organizador",
"casa",
"puerta",
"tirador",
"cajon",
"mueble"
] | Household > Other House Equipment | [
"1296245/images/image_1_compressed.jpg",
"1296245/images/image_2_compressed.jpg"
] | [
"1296245/stls/Tirador.stl"
] | CC0 | https://www.printables.com/model/1296245 | data_0048.tar |
262909 | Tire Pen Holder | [
"pencil",
"penholder"
] | Hobby & Makers > Organizers | [
"262909/images/image_1_compressed.jpg"
] | [
"262909/stls/Tire Pencil Holder.stl"
] | CC0 | https://www.printables.com/model/262909 | data_0048.tar | |
653048 | Tire repair kit box | <p>Simple box for your tire repair kit!<br>Enjoy!!!</p> | [
"tire"
] | Hobby & Makers > Automotive | [
"653048/images/image_1_compressed.jpg"
] | [
"653048/stls/Tire repair kit box lid.stl",
"653048/stls/Tire repair kit box.stl"
] | CC0 | https://www.printables.com/model/653048 | data_0048.tar |
557027 | TLD D4 Full Face MTB helmet | <p>I scanned my helmet, fixed all the holes, smoothed it a bit, and put a flat base. I believe the scan is full scale. </p><p> </p><p>Use as you wish. I would love to see peoples creations! :) </p><p> </p><p>For people wanting to try the same scan. I recommend putting painters tape over the goggle l... | [
"helmet",
"bike",
"mtb",
"3dscan",
"bikehelmet",
"mtbhelmet",
"troylee"
] | Sports & Outdoor > Outdoor Sports | [
"557027/images/image_1_compressed.jpg",
"557027/images/image_2_compressed.jpg",
"557027/images/image_3_compressed.jpg"
] | [
"557027/stls/TLD D4 Full Face Helmet.stl"
] | CC0 | https://www.printables.com/model/557027 | data_0048.tar |
1428236 | TM-22 Magazine Sleeve (M3 Bolts) | <p><strong>Overview: </strong></p><p>A 3-piece bolt-together magazine sleeve designed to fit over the 10 round <strong>polymer</strong> magazines of the Derya TM-22 for an improved, P-Mag styled look. 2 versions available - one with a cutout to add spent brass, and one without. I have not tested the fit for compat... | [
"sleeve",
"feather",
"magazine",
"22lr",
"derya",
"tm22"
] | Sports & Outdoor > Outdoor Sports | [
"1428236/images/image_1_compressed.jpg",
"1428236/images/image_2_compressed.jpg",
"1428236/images/image_3_compressed.jpg",
"1428236/images/image_4_compressed.jpg",
"1428236/images/image_5_compressed.jpg",
"1428236/images/image_6_compressed.jpg"
] | [
"1428236/stls/TM-22 PMAG Sleeve - Left.stl",
"1428236/stls/TM22 PMAG Sleeve (Cutout) - Left.stl",
"1428236/stls/TM22 PMAG Sleeve (Cutout) - Right.stl",
"1428236/stls/TM22 PMAG Sleeve - Base.stl",
"1428236/stls/TM22 PMAG Sleeve - Right.stl"
] | CC-BY | https://www.printables.com/model/1428236 | data_0048.tar |
209529 | To-Do Dice / What should I do dice |
<p>Dont know what to do ?!</p>
<p>Throw the dice and let fate tell you what to do.</p>
<p>12 different possibel things to do.</p>
<p>Try out if you ask your self what you should do :D</p>
<p>Hope you are enjoying the To-Do Dice</p>
<p>Check out my Designs on Pinshape.com
<a href="http://bit.ly/Pinshape">http://bit.... | [
"dice",
"nice",
"thingiverse",
"idea",
"todo",
"wuerfel",
"what",
"idealab",
"boring"
] | Toys & Games > Board Games | [
"209529/images/image_1_compressed.jpg"
] | [
"209529/stls/ToDo_Würfel_12_Seitig.stl"
] | CC-BY | https://www.printables.com/model/209529 | data_0048.tar |
544850 | TO-DO Post-It Stencil | <p>This stencil lets you transform a Post-It or other notes into a clear and productive <strong>to-do</strong> list.</p><p>It comes in two sizes:</p><p><strong>75x75mm</strong> <i>(regular Post-It).</i> </p><p><strong>98x98mm</strong> <i>for bigger notes.</i></p> | [
"organizer",
"office",
"organization",
"stencil",
"postit",
"organize",
"nosupport",
"nosupportneeded",
"stencils",
"nosupportsneeded",
"nosupports",
"task",
"todolist",
"memo",
"list",
"priority",
"tasklist"
] | Household > Office | [
"544850/images/image_1_compressed.jpg",
"544850/images/image_2_compressed.jpg"
] | [
"544850/stls/TO-DO STENCIL 75x75mm.stl",
"544850/stls/TO-DO STENCIL 98x98mm.stl"
] | CC-BY | https://www.printables.com/model/544850 | data_0048.tar |
1073948 | Toad-Cookie-Cutter | [
"cookiecutter"
] | Household > Kitchen | [
"1073948/images/image_1_compressed.jpg"
] | [
"1073948/stls/toad-kecks.stl"
] | CC0 | https://www.printables.com/model/1073948 | data_0048.tar | |
948694 | Toaster - wedding gift (improved) | <p>Der Originaltoaster wurde verbessert, indem die Wanne etwas vergrößert wurde und das Innenteil, das den Hebelmechanismus darstellt, stabiler konstruiert wurde und die seitlichen Stäbe als Halterung für die Drehknöpfe verlängert wurden. Diese waren im Original zu kurz und die Wanne zu klein. Zusätzlich wurde die Halt... | [
"money",
"decor",
"gift",
"home",
"wedding",
"toaster",
"married",
"geld",
"geldgeschenk",
"geldschein",
"weddinggift"
] | Household > Home Decor | [
"948694/images/image_1_compressed.jpg",
"948694/images/image_2_compressed.jpg",
"948694/images/image_3_compressed.jpg",
"948694/images/image_4_compressed.jpg",
"948694/images/image_5_compressed.jpg"
] | [
"948694/stls/AlleGoldenenElementeToaster_zusammen.stl",
"948694/stls/Body&beideSeitenteile_zusammen.stl",
"948694/stls/Body.stl",
"948694/stls/Drehknopf(2x).stl",
"948694/stls/Innenhebel_improved.stl",
"948694/stls/Seitenteil_gespiegelt.stl",
"948694/stls/Seitenteil_normal.stl",
"948694/stls/Seitliche... | CC-BY | https://www.printables.com/model/948694 | data_0048.tar |
750818 | Toddler dumbbell | <p>To the bar need support, print in place.</p><p>Spinlock collar a bit tight, must be modified the Y and X axis, for my mk4 need 100,5%!!!</p><p>Scaled in gcode.</p><p>Dimension:</p><p>Bar: length 18cm, diameter 2,5cm</p><p>Weight plate: diameter 6, 8, 10cm, hole 2,6cm, thickness 1cm</p><h3><strong>Print instructions<... | [
"bar",
"weight",
"dumbbell",
"toddler",
"carnival"
] | Costumes & Accessories > Cosplay & Costumes in general | [
"750818/images/image_1_compressed.jpg",
"750818/images/image_2_compressed.jpg"
] | [
"750818/stls/Bar.stl",
"750818/stls/Spinlock collar.stl",
"750818/stls/Weight plate large.stl",
"750818/stls/Weight plate medium.stl",
"750818/stls/Weight plate small.stl"
] | CC-BY | https://www.printables.com/model/750818 | data_0048.tar |
154477 | Toddler Puzzle block toy | <p>My son is 1.5 and loves puzzles, found something similar made of wood and wanted to print him a toy! </p><p>Recommend supervision so the toy isn't played in mouths! </p> | [] | Learning > Other 3D Objects for Learning | [
"154477/images/image_1_compressed.jpg"
] | [
"154477/stls/Pieces1 V1.0.stl",
"154477/stls/Pieces2 V1.0.stl",
"154477/stls/Pieces3 V1.0.stl",
"154477/stls/Puzzle all.stl",
"154477/stls/Puzzleboard V1.0.stl"
] | CC0 | https://www.printables.com/model/154477 | data_0048.tar |
927356 | TOILET PAPER - icon | [
"logo",
"icon"
] | Art & Design > 2D Plates & Logos | [
"927356/images/image_1_compressed.jpg",
"927356/images/image_2_compressed.jpg"
] | [
"927356/stls/Toilet_paper_icon.stl"
] | CC0 | https://www.printables.com/model/927356 | data_0048.tar | |
709036 | Toilet paper cloud Aligner | <p>Fasten the aligner with a piece of tape.</p><p> </p><p>The base desing is this: <a href="https://www.printables.com/es/model/119603-toilet-paper-cloud">TOILET PAPER CLOUD</a></p> | [] | Household > Bathroom | [
"709036/images/image_1_compressed.jpg"
] | [
"709036/stls/Toilet paper cloud ALIGNER.stl"
] | CC0 | https://www.printables.com/model/709036 | data_0048.tar |
717152 | TOILET SUPPORT | [
"bathroom"
] | Household > Bathroom | [
"717152/images/image_1_compressed.jpg"
] | [
"717152/stls/toilet support.stl"
] | CC0 | https://www.printables.com/model/717152 | data_0048.tar | |
143723 | Toilet Toothbrush Holder | <p>By having your toothbrush located right on the rim of your toilet, it is always handy when you need to brush your teeth in the morning while also having a bowel movement.</p><p>This model is designed so that it can be used with the toilet seat up or down, which makes it especially useful. </p><p>It takes a litt... | [] | Household > Bathroom | [
"143723/images/image_1_compressed.jpg"
] | [
"143723/stls/toilet toothbrush holder.stl"
] | CC0 | https://www.printables.com/model/143723 | data_0048.tar |
24753 | Token box - tray round 76mm | <p>A simple token holder, round version, great for board games. You can storage multiple boxes on each other.</p>
<h3>Print instructions</h3><h3>Category: Games Print Settings</h3>
<p><strong>Printer Brand:</strong> Prusa</p>
<p><strong>Printer:</strong> I3 MK3S</p>
<p><strong>Rafts:</strong> No</p>
<p><strong>Supports... | [
"thingiverse"
] | Toys & Games > Board Games | [
"24753/images/image_1_compressed.jpg",
"24753/images/image_2_compressed.jpg"
] | [
"24753/stls/76_round_v2.stl"
] | CC-BY | https://www.printables.com/model/24753 | data_0048.tar |
896754 | Tomahawk BGM-109 Cruise Missile Model | <p>This is my rough model of the Tomahawk BGM-109 Cruise Missile.</p> | [
"bgm",
"missile",
"cruise",
"tomahawk",
"109",
"bgm109"
] | Tabletop Miniatures > Vehicles & Machines | [
"896754/images/image_1_compressed.jpg",
"896754/images/image_2_compressed.jpg",
"896754/images/image_3_compressed.jpg",
"896754/images/image_4_compressed.jpg",
"896754/images/image_5_compressed.jpg",
"896754/images/image_6_compressed.jpg"
] | [
"896754/stls/Tomahawk BGM-109 Cruise Missile Model.stl"
] | CC0 | https://www.printables.com/model/896754 | data_0048.tar |
501304 | Tomaten Clips | Tomaten Clip gross und klein können auch für andere Pflanzen gebraucht werden. | Download free 3D printable STL models | [
"clips",
"garten",
"pflanzen",
"pflanzenclip",
"tomaten",
"tomatenhaken"
] | Household > Outdoor & Garden | [
"501304/images/image_1_compressed.jpg",
"501304/images/image_2_compressed.jpg"
] | [
"501304/stls/tomaten clip v4.stl",
"501304/stls/tomaten clip v5.stl"
] | CC0 | https://www.printables.com/model/501304 | data_0048.tar |
613624 | Tombow Glue Pen Stand | <p>This is a stand for the Tombow glue pen. It's an accessory for scrapbookers and others who use these pens.</p> | [
"stand",
"glue",
"tombow"
] | Hobby & Makers > Organizers | [
"613624/images/image_1_compressed.jpg"
] | [
"613624/stls/TomBowStand3.stl"
] | CC0 | https://www.printables.com/model/613624 | data_0048.tar |
248800 | Tommy Trojan Lego Sword | <p>One of my friends bought a USC Trojan Marching Band (Spirit of Troy) Lego figurine but it didn't come with a sword! How DARE they? So, I made a couple.</p><p>The first one is realistically-proportioned 'long' version and the other one is the 'short' Lego-figurine-appropriate proportioned one.</p><p>For UCLA Lego fie... | [
"sword",
"lego",
"thingiverse",
"trojan",
"usc"
] | Toys & Games > Outdoor Toys | [
"248800/images/image_1_compressed.jpg",
"248800/images/image_2_compressed.jpg",
"248800/images/image_3_compressed.jpg",
"248800/images/image_4_compressed.jpg",
"248800/images/image_5_compressed.jpg",
"248800/images/image_6_compressed.jpg",
"248800/images/image_7_compressed.jpg",
"248800/images/image_8... | [
"248800/stls/LongSword.stl",
"248800/stls/ShortSword.stl"
] | CC-BY | https://www.printables.com/model/248800 | data_0048.tar |
96257 | TomTom Rider raincover | <p>Raincover for the TomTom Rider mount to protect the vulnerable contacts. Suitable for Tomtom Rider 40/400/410/420/450/550. </p><p>This is a remixed version of <a href="https://www.thingiverse.com/thing:3105036">https://www.thingiverse.com/thing:3105036</a> . This remixed version is sturdier and made suitable fo... | [
"motorcycle"
] | Gadgets > Other Gadgets | [
"96257/images/image_1_compressed.jpg",
"96257/images/image_2_compressed.jpg",
"96257/images/image_3_compressed.jpg",
"96257/images/image_4_compressed.jpg"
] | [
"96257/stls/RainCoverV5-Body.stl"
] | CC-BY | https://www.printables.com/model/96257 | data_0048.tar |
397793 | Tonies Podest | <p>Small pedestals for the Tonie figures. The Tonies hold on the pedestal thanks to the built-in magnet.</p><p>Washers with a maximum diameter of 15mm are glued to the top of the pedestal.</p><p>I glued the pedestals to the wall with tesa strips. However, double-sided adhesive tape can also be used.</p><p>I printed all... | [
"shelf",
"wallmount",
"toniebox",
"tonies",
"tonie",
"podest"
] | Toys & Games > Other Toys & Games | [
"397793/images/image_1_compressed.jpg",
"397793/images/image_2_compressed.jpg",
"397793/images/image_3_compressed.jpg"
] | [
"397793/stls/Tonie-Podest.stl"
] | CC-BY | https://www.printables.com/model/397793 | data_0048.tar |
100330 | Tool Box | <p>Tool Box</p><p>120x80x40mm</p><p> </p> | [
"toolbox",
"krabicka"
] | Hobby & Makers > Other Ideas | [
"100330/images/image_1_compressed.jpg"
] | [
"100330/stls/BoxBase.stl",
"100330/stls/BoxTop.stl"
] | CC0 | https://www.printables.com/model/100330 | data_0048.tar |
13187 | Tool Holder for Prusa IKEA Lack 3D Printer Enclosure | <p>Tool holder for all the tools that come with Prusa I3 plus a hole for a usb stick. I recommend flipping it 180 degrees onto its top to print it. Needs very little infill.</p>
<p>Sorry it's not the greatest, but it works for me. It's a good solid tool holder.</p>
<h3>Print instructions</h3><h3>Category: 3D Printer Ac... | [
"prusa",
"prusai3",
"ikealack",
"accessories",
"3dprinter",
"thingiverse"
] | 3D Printers > Accessories | [
"13187/images/image_1_compressed.jpg",
"13187/images/image_2_compressed.jpg"
] | [
"13187/stls/prusa_tool_caddy.stl"
] | CC-BY | https://www.printables.com/model/13187 | data_0048.tar |
1220766 | Tool Holder v2 for Elegoo Neptune 3 Pro w/ Cable Chain Mod | <p><i><strong>Settings:</strong></i></p><p>Printer: Elegoo Neptune 3 Pro</p><p>Nozzle: 0.4mm</p><p>Layer Height: 0.2mm</p><p>Infill: 20%</p><p>Material: PLA+</p><p> </p><p>Update 03/09/25 – Removed the fillets due to warping and bed adhesion issues.</p><p> </p><p>***This version is deprecated.***</p><p>See th... | [
"pla",
"toolholder",
"elegoo",
"elegooneptune3pro",
"neptune3pro"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1220766/images/image_1_compressed.jpg",
"1220766/images/image_2_compressed.jpg",
"1220766/images/image_3_compressed.jpg"
] | [
"1220766/stls/Neptune 3 Pro Tool Holder for Cable Chain.stl"
] | CC-BY | https://www.printables.com/model/1220766 | data_0048.tar |
874604 | Tool organizer | [
"hexagon",
"organizer",
"desk",
"pencil",
"pen",
"3dprinting",
"screw",
"penholder",
"tools",
"3dprinter",
"screwdriver",
"pencilholder",
"deskorganizer",
"hexkey",
"toolorganizer",
"lapicero"
] | Hobby & Makers > Organizers | [
"874604/images/image_1_compressed.jpg",
"874604/images/image_2_compressed.jpg",
"874604/images/image_3_compressed.jpg",
"874604/images/image_4_compressed.jpg",
"874604/images/image_5_compressed.jpg"
] | [
"874604/stls/tool organizer.stl"
] | CC-BY | https://www.printables.com/model/874604 | data_0048.tar | |
36152 | Tool / Pen / Pencil Holder | <p>Outro porta ferramentas! Fácil de imprimir e montar! Aproveitem!</p>
<p>Innclui modelo original em formato Fusion360, caso desejem fazer ajustes.</p>
<p>Yet another tool holder! Easy to print and assembly! Enjoy!</p>
<p>Includes Fusion360 source files, in case you need to make any adjustment</p>
<h3>Print instructio... | [
"organizer",
"penholder",
"toolholder",
"pencilholder",
"deskorganizer",
"thingiverse"
] | Hobby & Makers > Organizers | [
"36152/images/image_1_compressed.jpg",
"36152/images/image_2_compressed.jpg",
"36152/images/image_3_compressed.jpg",
"36152/images/image_4_compressed.jpg",
"36152/images/image_5_compressed.jpg",
"36152/images/image_6_compressed.jpg"
] | [
"36152/stls/toolholder_base.stl",
"36152/stls/toolholder_sidepin_4x.stl",
"36152/stls/toolholder_top.stl"
] | CC-BY | https://www.printables.com/model/36152 | data_0048.tar |
1082399 | Tools, pens, pliers, tweezers, ... wall-mounted container | <p>Wall-mounted tool container featuring a hexagonal pattern design.</p><p>Usable for various workshop tools like pens, tweezers, pliers, knives, screwdrivers, scissors, etc.</p> | [
"cup",
"box",
"organizer",
"wall",
"tool",
"holder",
"container",
"pencil",
"pen",
"mount",
"knife",
"workshop",
"tools",
"screwdriver"
] | Household > Garage | [
"1082399/images/image_1_compressed.jpg",
"1082399/images/image_2_compressed.jpg"
] | [
"1082399/stls/tools container.stl"
] | CC-BY | https://www.printables.com/model/1082399 | data_0048.tar |
402206 | Tooth Croc Charm | <p>Prints best with supports, PETG or TPU hold up better than PLA/PLA+.</p> | [
"tooth",
"crocs",
"jibbitz",
"jibbit"
] | Fashion > Other Fashion Accessories | [
"402206/images/image_1_compressed.jpg",
"402206/images/image_2_compressed.jpg"
] | [
"402206/stls/SmallToothCroc.stl"
] | CC-BY | https://www.printables.com/model/402206 | data_0048.tar |
933042 | TOOTH VASE | <ul><li>Scalable</li></ul> | [
"vase",
"desktop",
"plant",
"gift",
"tooth",
"dentist",
"dental"
] | Household > Office | [
"933042/images/image_1_compressed.jpg"
] | [
"933042/stls/base.stl",
"933042/stls/tooth.stl"
] | CC0 | https://www.printables.com/model/933042 | data_0048.tar |
1010824 | Toothbrush Case v3 more strong, print and place hinge | <p>My last 2 models are not that strong, the hinge is easily broken after a few days. So I made this one with a stronger hinge. <br><br>Resize the model according to your brush size.<br><br>Please share your reviews in the comments.</p> | [
"case",
"diy",
"bathroom",
"cover",
"home",
"toothbrush",
"accessories",
"travel",
"toothbrushholder",
"toothbrushheadstand",
"toothbrushcase",
"toothbrushcover"
] | Household > Bathroom | [
"1010824/images/image_1_compressed.jpg",
"1010824/images/image_2_compressed.jpg"
] | [
"1010824/stls/Toothbrush_Case.stl"
] | CC0 | https://www.printables.com/model/1010824 | data_0048.tar |
143444 | Toothbrush Holder (family size) | <p>Theis family sized tooth brush holder comes as three stl flies, bottom, middle and top, and can all be fitted onto a Prusa Mk3 buildplate.</p><p>Print in a bright PLA or PETG with a minimun of 4 outer walls to give strength. Each part has location holes so that its neighbouring part fits snuggly into it.</p><p>This ... | [
"bathroom",
"razor",
"toothbrush",
"toothpaste",
"toothbrushholder",
"bathroomorganizer",
"razorholder"
] | Hobby & Makers > Organizers | [
"143444/images/image_1_compressed.jpg",
"143444/images/image_2_compressed.jpg",
"143444/images/image_3_compressed.jpg",
"143444/images/image_4_compressed.jpg"
] | [
"143444/stls/bottom v2.stl",
"143444/stls/middle v2.stl",
"143444/stls/top v2.stl"
] | CC0 | https://www.printables.com/model/143444 | data_0048.tar |
139322 | Toothbrush Holder - Wall Mounted | <p>Minimalistic toothbrush holder, wall mounted with a single 3M Command strip.</p><p>I designed this in Fusion 360, also sharing the .step file here so others can remix it if desired.</p><p>PrusaSlicer print settings:</p><ul><li>Print Settings: 0.20 Quality</li><li>Filament: Generic PETG (More resistant to bacteria th... | [] | Household > Bathroom | [
"139322/images/image_1_compressed.jpg",
"139322/images/image_2_compressed.jpg"
] | [
"139322/stls/Toothbrush Holder - Wall Mounted.stl"
] | CC-BY | https://www.printables.com/model/139322 | data_0048.tar |
268867 | Toothbrush Travel Case Print in Place | <p>2023-02-11:</p><p>added step and f3d files incase samone wants to change tolerances</p> | [
"holder",
"printinplace",
"brush",
"toothbrush",
"teeth",
"tooth",
"travel",
"cases",
"toothbrushholder",
"travelcase",
"traveling",
"travelling",
"toothbrushes",
"travelbox",
"traveler"
] | Household > Bathroom | [
"268867/images/image_1_compressed.jpg",
"268867/images/image_2_compressed.jpg",
"268867/images/image_3_compressed.jpg"
] | [
"268867/stls/ToothbrushTravelCasePIP.stl"
] | CC-BY | https://www.printables.com/model/268867 | data_0048.tar |
197781 | Toothless Pastepusher |
<p>This is a Remix of the great <a href="https://www.thingiverse.com/thing:49263">"Paste Pusher Animals"</a> by <a href="/makeplace/about">makeplace</a> and my own <a href="https://www.thingiverse.com/thing:1801127">"Toothless-cookie-cutter"</a></p>
<p>It was kinda requested by <a href="/marianok/about">marianok</a>... | [
"toothpaste",
"thingiverse",
"toothpastesqueezer",
"toothless"
] | Household > Bathroom | [
"197781/images/image_1_compressed.jpg",
"197781/images/image_2_compressed.jpg",
"197781/images/image_3_compressed.jpg"
] | [
"197781/stls/Toothless_Pastepusher.stl",
"197781/stls/Toothless_Pastepusher_smaller.stl"
] | CC-BY | https://www.printables.com/model/197781 | data_0048.tar |
1022021 | Toothless toothpaste vomit |
<p>can fit Colgate and elmex Toothpaste. Haven't printed it yet. Please comment if there are any issues</p>
Category: Bathroom
| [
"dragon",
"dragons",
"bathroom",
"toothpaste",
"thingiverse",
"toothpastesqueezer",
"bathroomaccessories",
"toothless"
] | Household > Bathroom | [
"1022021/images/image_1_compressed.jpg",
"1022021/images/image_2_compressed.jpg"
] | [
"1022021/stls/Toothless_toothpaste.stl"
] | CC-BY | https://www.printables.com/model/1022021 | data_0048.tar |
733170 | Toothpaste Cap and Stand | <p>A remix of kanhelf's toothpaste cap with an included stand. The stand is big enough to keep you (read your kid) from losing the cap in the drain. Can I buy toothpaste with a flip-top? Sure. Should I probably replace those hideous faucets that came with my house to include a stopper? Yes. Was this a basically just a ... | [] | Household > Bathroom | [
"733170/images/image_1_compressed.jpg",
"733170/images/image_2_compressed.jpg"
] | [
"733170/stls/toothpaste_cap_and_stand.stl"
] | CC0 | https://www.printables.com/model/733170 | data_0048.tar |
133265 | Toothpaste Squeezer with Automatic Locking Mechanism | <p>Printing advice:</p><ul><li><strong>PETG </strong>is preferred.</li><li>The print <strong>‘base’</strong> should be printed with <strong>0.2mm</strong> or smaller layer height and at <strong>100% infill.</strong></li><li><strong>Shaft assembly</strong>, prints: <strong>‘shaft’</strong>, <strong>'handle'</strong> and... | [
"mechanism",
"lock",
"gadgets",
"bathroom",
"brush",
"cool",
"tooth",
"toothpaste",
"paste"
] | Household > Bathroom | [
"133265/images/image_1_compressed.jpg",
"133265/images/image_2_compressed.jpg",
"133265/images/image_3_compressed.jpg"
] | [
"133265/stls/1.5mmGap_base.stl",
"133265/stls/1mmGap_base.stl",
"133265/stls/cover.stl",
"133265/stls/handle.stl",
"133265/stls/pin.stl",
"133265/stls/pin_nut.stl",
"133265/stls/shaft.stl",
"133265/stls/shaft_nut.stl"
] | CC-BY | https://www.printables.com/model/133265 | data_0048.tar |
237178 | Toothpick Receptical (and Pill Box) | <h3>Motivation</h3><p>I had broken box of toothpicks. Those things are fragile! As you can see, this was quite a mess.</p><figure class="image image-style-align-left image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/237178/rich_content/fbe6c6a9-2363-44c3-84ba-73f366db5422/img_2022070... | [
"container",
"toothpick",
"pillbox"
] | Household > Other House Equipment | [
"237178/images/image_1_compressed.jpg",
"237178/images/image_2_compressed.jpg"
] | [
"237178/stls/can.stl",
"237178/stls/lid.stl",
"237178/stls/small can.stl",
"237178/stls/toothpich_receptical.stl"
] | CC-BY | https://www.printables.com/model/237178 | data_0048.tar |
86965 | Toothpicks in a credit card / Párátka v kreditní kartě | <p>[EN]</p><p>A simple wallet card to keep your toothpicks close at hand. Plus, this card includes two small tweezers (for picking out suspicious bits of food, for example). In case of use, simply break the toothpicks or tweezers off the card.</p><p> </p><p>[CZ]</p><p>ednoduchá karta do peněženky díky které budete... | [
"card",
"wallet",
"creditcard",
"tooth",
"toothpick",
"tweezers",
"pinzeta",
"penezenka",
"karta",
"paratko"
] | Gadgets > Other Gadgets | [
"86965/images/image_1_compressed.jpg",
"86965/images/image_10_compressed.jpg",
"86965/images/image_11_compressed.jpg",
"86965/images/image_2_compressed.jpg",
"86965/images/image_3_compressed.jpg",
"86965/images/image_4_compressed.jpg",
"86965/images/image_5_compressed.jpg",
"86965/images/image_6_compr... | [
"86965/stls/karta paratek.stl"
] | CC-BY | https://www.printables.com/model/86965 | data_0048.tar |
348643 | Top hat octopus | A octopus with a top hat | Download free 3D printable STL models | [
"octopus",
"hat",
"tophat"
] | Toys & Games > Action Figures & Statues | [
"348643/images/image_1_compressed.jpg"
] | [
"348643/stls/top hat octopus head with sup.stl",
"348643/stls/top hat octopus head.stl",
"348643/stls/top hat octopus with sup.stl",
"348643/stls/top hat octopus.stl"
] | CC-BY | https://www.printables.com/model/348643 | data_0048.tar |
1330285 | Top Loader, Slab, and Singles Card Stand | <p>Top Loader, Slab, and Singles Card Stand. Redesigned to hold slabs as well as singles and top loaders. check out my other top loader displays. These are only single tier stands to accommodate sellers who sell singles, slabs, and/or using top loaders for the singles</p><p> </p> | [
"cardholder",
"toploader",
"cardstand",
"psa",
"slab",
"cgc",
"graded"
] | Hobby & Makers > Other Ideas | [
"1330285/images/image_1_compressed.jpg",
"1330285/images/image_2_compressed.jpg",
"1330285/images/image_3_compressed.jpg"
] | [
"1330285/stls/1 CARD.stl",
"1330285/stls/1 OR 2 CARD .stl",
"1330285/stls/2 CARD.stl",
"1330285/stls/3 CARD.stl"
] | LGPL | https://www.printables.com/model/1330285 | data_0048.tar |
293834 | Top Loading Vertical Card Storage Divider | <p>I loved the design of jcolega's <a href="https://www.printables.com/model/200921-card-divider-for-sideways-game-card-boxes">Sideways Divider</a>, but I tend to use makeshift shoe boxes and BCW shoe box storage to orient my cards vertically. I used the influence of his design to make one from the ground up. I also lo... | [
"card",
"mtg",
"magic",
"storage",
"divider",
"sleeves",
"dragonshield",
"bcw"
] | Hobby & Makers > Organizers | [
"293834/images/image_1_compressed.jpg",
"293834/images/image_2_compressed.jpg",
"293834/images/image_3_compressed.jpg"
] | [
"293834/stls/Vertical Card Divider.stl"
] | GPL3.0 | https://www.printables.com/model/293834 | data_0048.tar |
1037665 | Top of Vase Flower Frog | [
"vase",
"frog",
"flower",
"garden"
] | Household > Outdoor & Garden | [
"1037665/images/image_1_compressed.jpg"
] | [
"1037665/stls/flower frog.stl"
] | BSD | https://www.printables.com/model/1037665 | data_0048.tar | |
174190 | Top Rack Wheel and Clip for Bosch Dishwasher | <p>UPDATE: Uploaded new wheel STL.</p><p>Replaces a wheel clip (and optionally a wheel) on the top rack of a Bosch dishwasher. The clip fits OEM wheels too.</p><p>Printing:</p><ul><li>Clip<ul><li>Support everywhere</li><li>0.2mm layer height, 3 perimeters, 100% infill</li><li>Slow down for adhesion and accuracy</li><li... | [
"wheel",
"clip",
"bosch",
"dishwasher"
] | Household > Kitchen | [
"174190/images/image_1_compressed.jpg",
"174190/images/image_2_compressed.jpg",
"174190/images/image_3_compressed.jpg",
"174190/images/image_4_compressed.jpg",
"174190/images/image_5_compressed.jpg"
] | [
"174190/stls/Bosch Top Rack Wheel Clip.stl",
"174190/stls/Bosch Top Rack Wheel.stl"
] | CC0 | https://www.printables.com/model/174190 | data_0048.tar |
132400 | Topper heart | [
"topper",
"heart",
"caketopper"
] | Household > Home Decor | [
"132400/images/image_1_compressed.jpg"
] | [
"132400/stls/heart.stl"
] | CC0 | https://www.printables.com/model/132400 | data_0048.tar | |
452449 | Toroidal Propeller | <p>Toroidal propeller for rc drones </p> | [
"propeller",
"prop",
"toroidal",
"toroidalpropeller"
] | Hobby & Makers > RC & Robotics | [
"452449/images/image_1_compressed.jpg"
] | [
"452449/stls/Toroidal Propeller.stl"
] | CC0 | https://www.printables.com/model/452449 | data_0048.tar |
540114 | Torre de Temperatura para Pruebas de Materiales de Impresión 3D | <p>¡Saludos, comunidad de amantes de la impresión 3D en prntables!</p><p>Me complace compartir con ustedes mi último proyecto: una torre de temperatura diseñada para probar diferentes materiales de impresión 3D. Si alguna vez te has preguntado cuál es la temperatura óptima para imprimir con un determinado material, ¡es... | [
"tower",
"temperaturetower"
] | 3D Printers > Test Models | [
"540114/images/image_1_compressed.jpg",
"540114/images/image_2_compressed.jpg",
"540114/images/image_3_compressed.jpg"
] | [
"540114/stls/180 - 200 x 5.stl",
"540114/stls/180 - 220 x 10.stl",
"540114/stls/185 - 205 x 5.stl",
"540114/stls/190 - 210 x 5.stl",
"540114/stls/190 - 230 x 10.stl",
"540114/stls/195 - 215 x 5.stl",
"540114/stls/200 - 220 x 5.stl",
"540114/stls/200 - 240 x 10.stl",
"540114/stls/205 - 225 x 5.stl",
... | GPL2.0 | https://www.printables.com/model/540114 | data_0048.tar |
1716077 | Tortue Sagace Lait Fraise / Wise Turtle Strawberry Milk Version2 | <p>La déjà célèbre "tortue sagace" buvant son lait fraise. The famous "Wise Turtle" drinking his strawberry milk. #LFI #Melenchon2027 #Tortue #Tortuesagace</p><p>Utilisation d'une instance locale de stable diffusion pour générer les photos de profil puis Hunyuan3D-2 et travaille du modèle dans FreeCAD et Meshmixer... | [
"tortue",
"lfi",
"tortuesagace",
"melenchon2027"
] | Toys & Games > Action Figures & Statues | [
"1716077/images/image_1_compressed.jpg",
"1716077/images/image_2_compressed.jpg"
] | [
"1716077/stls/WiseTurtle.stl",
"1716077/stls/WiseTurtle_Based.stl",
"1716077/stls/WiseTurtle_Based_NoPhi.stl"
] | CC0 | https://www.printables.com/model/1716077 | data_0048.tar |
190142 | Torus Earplug |
<p>Useful for dampening down live music without losing enjoyment, and for people like me with sound sensitivities. A little less dampening than Anybodysguess' design, though both allow you to hear voices well - even better than normal in crowded places, stores, restaurants etc.</p>
<p>Even a rough print works well, ... | [
"music",
"sound",
"quiet",
"disability",
"thingiverse",
"autism",
"earbud",
"earplug",
"concert",
"disabilityaid"
] | Gadgets > Audio | [
"190142/images/image_1_compressed.jpg",
"190142/images/image_2_compressed.jpg",
"190142/images/image_3_compressed.jpg",
"190142/images/image_4_compressed.jpg",
"190142/images/image_5_compressed.jpg"
] | [
"190142/stls/EarbudVer3.stl"
] | CC-BY | https://www.printables.com/model/190142 | data_0048.tar |
798057 | TouchId Module with click | <p>Riffing off SnazzyLabs original idea, I wanted to make my own version with a clickable key. I ended up with a three-piece thing: </p><ul><li>The first thing is the base, where the logic board sits. I used two M2 H4 threaded inserts that I slid in with a soldering iron to fix it in place. The same soldering iron... | [
"touchid"
] | Gadgets > Computers | [
"798057/images/image_1_compressed.jpg",
"798057/images/image_2_compressed.jpg",
"798057/images/image_3_compressed.jpg",
"798057/images/image_4_compressed.jpg"
] | [
"798057/stls/base.stl",
"798057/stls/button_holder.stl",
"798057/stls/lid.stl"
] | CC-BY | https://www.printables.com/model/798057 | data_0048.tar |
1528870 | Touchland Sanitizer Holder | <p>Touchland Hand Sanitizer Holder</p><p>Keep your sanitizer close and easy to grab! This <strong>lightweight Touchland holder</strong> is designed for everyday carry and quick printing.</p><h3>Why you’ll like it</h3><ul><li><p><strong>Super easy to print</strong> – no tricky geometry or supports</p></li><li><p><strong... | [
"holder",
"clip",
"hand",
"storage",
"loop",
"healthcare",
"tech",
"sanitizer",
"nurse",
"helpfull",
"handsanitizerholder",
"touchland"
] | Healthcare > Medical Tools | [
"1528870/images/image_1_compressed.jpg",
"1528870/images/image_2_compressed.jpg",
"1528870/images/image_3_compressed.jpg",
"1528870/images/image_4_compressed.jpg",
"1528870/images/image_5_compressed.jpg",
"1528870/images/image_6_compressed.jpg"
] | [
"1528870/stls/sanitizer holder v1 no loop.stl",
"1528870/stls/touchland sanitizer holder.stl"
] | CC-BY | https://www.printables.com/model/1528870 | data_0048.tar |
346760 | towel hanger | <p>Towel or robe hanger, very simple but efficient design.</p><p>I made it to be as solid as possible still maintaining a simple and minimalist look.</p><p>You can find both the file with holes and without, so you can choose to glue or screw it. I used glue for mine in order to keep the design clean and it works perfec... | [
"kitchen",
"towel",
"hanger",
"bathroom",
"hang",
"robe"
] | Household > Bathroom | [
"346760/images/image_1_compressed.jpg",
"346760/images/image_2_compressed.jpg",
"346760/images/image_3_compressed.jpg",
"346760/images/image_4_compressed.jpg",
"346760/images/image_5_compressed.jpg"
] | [
"346760/stls/towel_hanger.stl",
"346760/stls/towel_hanger_holes.stl"
] | CC0 | https://www.printables.com/model/346760 | data_0048.tar |
223197 | Towel strap / poutko na ručník | <p>This model is recomended for towel that are without eyelet. <br>The towel is threaded through a narrow clasp and it is done.<br>I print it with support from PETG material.</p> | [
"towel",
"rucnik",
"uterka"
] | Household > Bathroom | [
"223197/images/image_1_compressed.jpg",
"223197/images/image_2_compressed.jpg"
] | [
"223197/stls/poutko na rucnik.stl"
] | CC-BY | https://www.printables.com/model/223197 | data_0048.tar |
1380906 | Tower Crane Tea Bag Holder | <p>Printed as 5 separate parts. I didn't need any support, but some well placed tree supports could be useful. Glue is required for the counterweight and to connect the jib to the tower. Despite the name, the counterweight isn't actually heavy enough to hold down the jib even at 100% infill. </p> | [
"mug",
"tea",
"crane"
] | Household > Kitchen | [
"1380906/images/image_1_compressed.jpg",
"1380906/images/image_2_compressed.jpg"
] | [
"1380906/stls/TeaTower_Cabin.stl",
"1380906/stls/TeaTower_CounterWeight.stl",
"1380906/stls/TeaTower_CraneJib.stl",
"1380906/stls/TeaTower_CraneTower.stl",
"1380906/stls/TeaTower_FullCrane.stl",
"1380906/stls/TeaTower_Pallet.stl"
] | CC-BY | https://www.printables.com/model/1380906 | data_0048.tar |
255998 | Tower of 42 | <p>Don't Panic!</p><p>You know the answer, but no one knows what the question was...</p><p>Category: Decor</p><p>This is a part of a series of towers/penholders:</p><p>Tower of Pi: <a href="https://www.printables.com/de/model/255978-tower-of-pi">https://www.printables.com/de/model/255978-tower-of-pi</a></p><p>Tower of ... | [
"dontpanic",
"thingiverse",
"42theanswer",
"douglasadams",
"farout"
] | Household > Other House Equipment | [
"255998/images/image_1_compressed.jpg",
"255998/images/image_2_compressed.jpg",
"255998/images/image_3_compressed.jpg",
"255998/images/image_4_compressed.jpg"
] | [
"255998/stls/Tower_of_42.stl"
] | CC-BY | https://www.printables.com/model/255998 | data_0048.tar |
101389 | Toy Boat Eino |
<p>This is a toy boat I designed for my 3-year old son. It turned out very well. All walls are 5mm thick which makes the boat capable of taking the beating of a kid...</p>
<p>There are three parts to be able to print in many colors: the hull, deck and cabin.</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</stro... | [
"thingiverse"
] | Toys & Games > Other Toys & Games | [
"101389/images/image_1_compressed.jpg",
"101389/images/image_2_compressed.jpg",
"101389/images/image_3_compressed.jpg",
"101389/images/image_4_compressed.jpg",
"101389/images/image_5_compressed.jpg",
"101389/images/image_6_compressed.jpg",
"101389/images/image_7_compressed.jpg",
"101389/images/image_8... | [
"101389/stls/Cabin.stl",
"101389/stls/Deck.stl",
"101389/stls/Hull.stl"
] | CC-BY | https://www.printables.com/model/101389 | data_0048.tar |
167098 | Toy Farm Fence | <p>When you have a farm, you can always use more corral space. This is a simple print with two parts that can be superglued together. I have printed in both PLA and PTEG with standard 0.3 layers and no supports. I used a Prusa i3 MK3S+. The underside of the rails may have a couple loose strands ... | [
"fence",
"farm"
] | Toys & Games > Other Toys & Games | [
"167098/images/image_1_compressed.jpg",
"167098/images/image_2_compressed.jpg",
"167098/images/image_3_compressed.jpg"
] | [
"167098/stls/fence clip2 v3.stl",
"167098/stls/fence2 v3.stl"
] | CC0 | https://www.printables.com/model/167098 | data_0048.tar |
524582 | Toy Story Logo | <p>I designed it for my son, it's fully printable in various colors.<br><br>Give it a like if you liked it, just knowing that makes me happy.<br><br>Hope you like it. Enjoy it.</p> | [
"toy",
"logo",
"3dlogo",
"pixar",
"story",
"toystory",
"chochi3d"
] | Art & Design > 2D Plates & Logos | [
"524582/images/image_1_compressed.jpg",
"524582/images/image_2_compressed.jpg",
"524582/images/image_3_compressed.jpg"
] | [
"524582/stls/LOGO_TOY_STORY_BLUE.stl",
"524582/stls/LOGO_TOY_STORY_RED.stl",
"524582/stls/LOGO_TOY_STORY_YELLOW.stl"
] | CC-BY | https://www.printables.com/model/524582 | data_0048.tar |
64358 | Toy Stove Top Hob - v1 | <p>Little toy stovetop inspired by the old fisher price toy.</p><p>video: <a href="https://imgur.com/Bxc9oFG.mp4">https://imgur.com/Bxc9oFG.mp4</a></p><p>The cam and knob have to be glued on to a 10mm shaft and it's a bit fiddly, plus pushing the shaft through the cam means glue covers the end. The shell requires a lot... | [
"stove",
"oven",
"cooker",
"stovetop",
"hob"
] | Toys & Games > Other Toys & Games | [
"64358/images/image_1_compressed.jpg"
] | [
"64358/stls/BASE.stl",
"64358/stls/CAM.stl",
"64358/stls/HEAT.stl",
"64358/stls/KNOB.stl",
"64358/stls/RING.stl",
"64358/stls/SHELL.stl"
] | CC-BY | https://www.printables.com/model/64358 | data_0048.tar |
161683 | Toy Tombstone (BattleBots) | <p>My kids are huge fans of BattleBots and inspired me to create a set of toys that they can be a bit rough with without fear of breaking the more expensive Hexbug toys. </p><p>All “pins” are sections of 1.75 standard filament snipped to length. Parts held together with super glue where appropriate. </p><p>I... | [
"tombstone",
"battlebots"
] | Toys & Games > Vehicles | [
"161683/images/image_1_compressed.jpg",
"161683/images/image_2_compressed.jpg"
] | [
"161683/stls/ts-body.stl",
"161683/stls/ts-weapon-washer.stl",
"161683/stls/ts-weapon.stl",
"161683/stls/ts-wheel-washer.stl",
"161683/stls/ts-wheel.stl"
] | CC-BY | https://www.printables.com/model/161683 | data_0048.tar |
825679 | Toy Truck - Print-in-place WITH BED | <p>I downloaded this model from James Wood, but I thought it needed a bed. I see why the original had no bed, because it would need supports, but even with supports, I think it needs one. Paint on supports for the bed, but none on the wheels. I also have a truck with a police siren. supports on the siren.</p> | [
"pickup",
"pickuptruck",
"toytruck",
"f250",
"printinplacecar"
] | Toys & Games > Vehicles | [
"825679/images/image_1_compressed.jpg",
"825679/images/image_2_compressed.jpg",
"825679/images/image_3_compressed.jpg",
"825679/images/image_4_compressed.jpg",
"825679/images/image_5_compressed.jpg"
] | [
"825679/stls/F250 with bed.stl",
"825679/stls/police truck F250 (1).stl",
"825679/stls/police truck F250 (2).stl"
] | GPL2.0 | https://www.printables.com/model/825679 | data_0048.tar |
771240 | Toy whale for kids. | <p>Toy whale for kids to use in the bathtub.</p><p>There is a hole on top of it as whales do, but toddlers also love it when the air bubbles come out from top of it. </p><p> </p><p>I used 5 top and 5 bottom layers.</p><p>2 walls. Infill 47% </p><p>No raft no brim no supports needed. </p><p>Layer hei... | [
"toy",
"bathtub",
"bath",
"kids",
"whale"
] | Toys & Games > Other Toys & Games | [
"771240/images/image_1_compressed.jpg",
"771240/images/image_2_compressed.jpg",
"771240/images/image_3_compressed.jpg",
"771240/images/image_4_compressed.jpg",
"771240/images/image_5_compressed.jpg",
"771240/images/image_6_compressed.jpg"
] | [
"771240/stls/whale4.stl"
] | CC-BY | https://www.printables.com/model/771240 | data_0048.tar |
94202 | Toy Wood Train Track / Spielzeug Holzeisenbahn Schienen / Kreuzung Kurve / BRIO Thomas IKEA eBay kompatibel |
<p>Bilder sagen mehr als 1000 Worte<br/>
Pictures say more than 1000 words</p>
Category: Mechanical Toys
| [
"wood",
"track",
"train",
"thingiverse"
] | Toys & Games > Other Toys & Games | [
"94202/images/image_1_compressed.jpg",
"94202/images/image_2_compressed.jpg"
] | [
"94202/stls/kreuzungKurve.stl"
] | LGPL | https://www.printables.com/model/94202 | data_0048.tar |
171771 | TP Tissue Dispenser |
<p>A simple weave pattern toilet paper tissue dispenser made in tinkercad.</p>
<p>It measures 135mm round by about 120mm tall.</p>
<p>Printed with dual extruders in PLA.</p>
<p>Pull the cardboard core out of the center to feed paper through the lid.</p>
<p>Added files for single extruder prints.</p>
<h3>Print Settin... | [
"toiletpaper",
"toiletpaperholder",
"thingiverse",
"tissue",
"tissuebox"
] | Household > Other House Equipment | [
"171771/images/image_1_compressed.jpg",
"171771/images/image_2_compressed.jpg",
"171771/images/image_3_compressed.jpg",
"171771/images/image_4_compressed.jpg",
"171771/images/image_5_compressed.jpg",
"171771/images/image_6_compressed.jpg",
"171771/images/image_7_compressed.jpg",
"171771/images/image_8... | [
"171771/stls/TissueHolder-1color.stl",
"171771/stls/TissueHolder-frame.stl",
"171771/stls/TissueHolder-weave.stl",
"171771/stls/TissueHolderLid-1color.stl",
"171771/stls/TissueHolderLid-frame.stl",
"171771/stls/TissueHolderLid-weave.stl"
] | CC-BY | https://www.printables.com/model/171771 | data_0048.tar |
253400 | TP-Link Deco X50 Stand | <p>A plain quick printable stand for a TP-Link Deco X50 mesh router. It's printable without any supports and default settings. I wanted one since it has a handle below where it sits. </p> | [
"stand",
"deco",
"tplink",
"x50"
] | Gadgets > Other Gadgets | [
"253400/images/image_1_compressed.jpg",
"253400/images/image_2_compressed.jpg",
"253400/images/image_3_compressed.jpg",
"253400/images/image_4_compressed.jpg"
] | [
"253400/stls/Deco X50 Stand.stl"
] | CC0 | https://www.printables.com/model/253400 | data_0048.tar |
372003 | TP-Link Deco XE75 Wall Bracket | A remix of a simple wall mount bracket for the Deco XE75 with the model number on the front for easy identification | Download free 3D printable STL models | [] | Household > Other House Equipment | [
"372003/images/image_1_compressed.jpg"
] | [
"372003/stls/XE75 Bracket.stl"
] | CC-BY | https://www.printables.com/model/372003 | data_0048.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.