model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
424683 | Turntable record weight | <h3>Turntable record weight puck</h3><p>This is a hollow turntable weight used to dampen vibrations and hold warped records in place. Just place the record on the turntable and then the weight on top. I'ts mostly common to get them with hi-fi systems but can be used on any turntable.</p><p>There are two versions, one t... | [
"music",
"puck",
"record",
"turntable",
"weight",
"vinyl",
"hifi"
] | Gadgets > Audio | [
"424683/images/image_1_compressed.jpg"
] | [
"424683/stls/Puck lid low.stl",
"424683/stls/Puck lid.stl",
"424683/stls/Puck low.stl",
"424683/stls/Puck.stl"
] | CC0 | https://www.printables.com/model/424683 | data_0048.tar |
1113541 | Turteltauben (lovebirds) Kevin allein in New York | <p>Stelle hier eine Turteltaube zur verfügung, bekannt aus dem Film Kevin allein in New York.</p><p> </p><p>Provide here a turtle dove, known from the movie Home Alone 2: Lost in New York</p> | [
"new",
"home",
"in",
"kevin",
"alone",
"york",
"lovebirds",
"allein",
"turteltauben"
] | Costumes & Accessories > Props | [
"1113541/images/image_1_compressed.jpg"
] | [
"1113541/stls/Turteltauben.stl"
] | CC0 | https://www.printables.com/model/1113541 | data_0048.tar |
1147917 | turtle | [
"turtle",
"moveable",
"seaturtle"
] | 3D Printers > Test Models | [
"1147917/images/image_1_compressed.jpg"
] | [
"1147917/stls/turtle.stl"
] | CC0 | https://www.printables.com/model/1147917 | data_0048.tar | |
1724550 | Turtle Pool Chlorine Floater | <p>Turtle Pool Chlorine Floater 🐢</p><p>A fun and practical floating chlorine dispenser for pools, designed in the shape of a turtle.<br>The lower compartment is designed to hold up to <strong>3 chlorine tablets (20g each)</strong>. Once placed in the water, the floater slowly disperses chlorine while floating around ... | [
"functional",
"print",
"floating",
"swimming",
"accessory",
"turtle",
"petg",
"outdoor",
"pool",
"dispenser",
"cleaner",
"tablets",
"floater",
"chlorine",
"makerworld"
] | Sports & Outdoor > Outdoor Sports | [
"1724550/images/image_1_compressed.jpg",
"1724550/images/image_2_compressed.jpg",
"1724550/images/image_3_compressed.jpg",
"1724550/images/image_4_compressed.jpg",
"1724550/images/image_5_compressed.jpg"
] | [
"1724550/stls/dosatore cloro.stl",
"1724550/stls/Nuova tartaruga.stl",
"1724550/stls/Nuovo dosatore coro.stl",
"1724550/stls/tartaruga piscina supporto petg nuovo.stl",
"1724550/stls/tartaruga piscina.stl",
"1724550/stls/Tartaruga.stl",
"1724550/stls/Ttartaruga piscina supporto pla nuovo.stl"
] | CC-BY | https://www.printables.com/model/1724550 | data_0048.tar |
81773 | Tutorial Pumpkin for Fusion 360 | <p>These models are from a Fusion 360 tutorial that demonstrates multiple modeling techniques.</p><figure class="media"><oembed url="https://youtu.be/iuxGKbvCw7I"></oembed></figure><h4>Printing</h4><p>This model can be printed without supports.</p><p>This model requires minimum infill (test printed with 5% gyroid infil... | [
"pumpkin",
"fusion360",
"thingiverse",
"tutorial"
] | Gadgets > Other Gadgets | [
"81773/images/image_1_compressed.jpg",
"81773/images/image_2_compressed.jpg",
"81773/images/image_3_compressed.jpg"
] | [
"81773/stls/Jack-o-lantern.stl",
"81773/stls/Pumpkin.stl"
] | CC-BY | https://www.printables.com/model/81773 | data_0048.tar |
1204359 | Tux prepared for multicolor with flat bottom | <p>I printed it with standard PLA settings, 0.2mm layer height on a MK4S and MMU3 and without supports. The right arm/wing could need some supports, but it's in a tricky spot, so I didn't bother. There was some minor overhang drooping that I simply cut away with a knife. I printed without any supports.</p><p>The model ... | [
"mmu",
"opensource",
"penguin",
"linux",
"tux",
"mmupainted"
] | Art & Design > Sculptures | [
"1204359/images/image_1_compressed.jpg",
"1204359/images/image_2_compressed.jpg",
"1204359/images/image_3_compressed.jpg"
] | [
"1204359/stls/Tux_multicolor_flat.stl"
] | LGPL | https://www.printables.com/model/1204359 | data_0048.tar |
83794 | Tuxedo Sam (Hello Kitty's friend) Penguin (タキシードサム, Takishīdosamu) |
<p>Tuxedo Sam (Hello Kitty's friend) (タキシードサム, Takishīdosamu)<br/>
Tuxedo Orville J. Sam</p>
Category: Sculptures
| [
"anime",
"thingiverse"
] | Art & Design > Sculptures | [
"83794/images/image_1_compressed.jpg",
"83794/images/image_10_compressed.jpg",
"83794/images/image_11_compressed.jpg",
"83794/images/image_2_compressed.jpg",
"83794/images/image_3_compressed.jpg",
"83794/images/image_4_compressed.jpg",
"83794/images/image_5_compressed.jpg",
"83794/images/image_6_compr... | [
"83794/stls/beak_yellow.stl",
"83794/stls/Body_main_light_blue.stl",
"83794/stls/bottom_white.stl",
"83794/stls/bow_red.stl",
"83794/stls/eye_left.stl",
"83794/stls/eye_Right.stl",
"83794/stls/feet_left_yellow.stl",
"83794/stls/feet_right_yellow.stl",
"83794/stls/hat_white.stl"
] | CC-BY | https://www.printables.com/model/83794 | data_0048.tar |
209692 | TV Remote wall holder |
<p>A simple TV remote holder. Designed to fit a Sony RM-ED035 remote control, would probably fit many others as well.</p>
<p>Space inside has size of about 53 x 19,8 x 31,3 mm</p>
<p>No supports necessary.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printe... | [
"thingiverse"
] | Household > Office | [
"209692/images/image_1_compressed.jpg",
"209692/images/image_2_compressed.jpg",
"209692/images/image_3_compressed.jpg",
"209692/images/image_4_compressed.jpg"
] | [
"209692/stls/TV_remote_holder.stl"
] | CC-BY | https://www.printables.com/model/209692 | data_0048.tar |
422139 | Tweezer for wargames | <p>All tweezers i could find had to thin tips to make then usefull for Hex & counters wargames, this one has tips that is kinda the middle of the metal ones you can buy and the thin ones for electronics. This one fits GMT counters perfectly in my view.</p><p>v4 has a bit wider tips.</p><p>I printed with support on ... | [
"tweezer",
"gmt",
"avalonhill",
"historicalboardgames"
] | Toys & Games > Board Games | [
"422139/images/image_1_compressed.jpg",
"422139/images/image_2_compressed.jpg"
] | [
"422139/stls/pinchet wargames V3.stl",
"422139/stls/pinchet wargames V4.stl"
] | GPL3.0 | https://www.printables.com/model/422139 | data_0048.tar |
205298 | Twice keychain | [
"kpop",
"twice"
] | Art & Design > Other Art & Designs | [
"205298/images/image_1_compressed.jpg"
] | [
"205298/stls/twicekeychain.stl"
] | CC0 | https://www.printables.com/model/205298 | data_0048.tar | |
822286 | Twist Clamp 3-Inline BCAR (5/8" to 16mm) | <p>A general-purpose Nerf BCAR meant for 16mm OD barrel mounts. Features a barrel clamp to secure into place and a thumbscrew designed for extra leverage. Requires 12x M3x8-12 bolts, 9x F683ZZ 3x7x3 bearings, one M3x20 bolt and one M3 hex nut.</p><p>Source files are included and are parametric on angle and crush.... | [
"nerf",
"nerfmod",
"bcar"
] | Hobby & Makers > Other Ideas | [
"822286/images/image_1_compressed.jpg",
"822286/images/image_2_compressed.jpg",
"822286/images/image_3_compressed.jpg"
] | [
"822286/stls/0DegClampBCAR.stl",
"822286/stls/10DegClampBCAR.stl",
"822286/stls/4DegClampBCAR.stl",
"822286/stls/5DegClampBCAR.stl",
"822286/stls/6DegClampBCAR.stl",
"822286/stls/7.5DegClampBCAR.stl",
"822286/stls/7DegClampBCAR.stl",
"822286/stls/8DegClampBCAR.stl",
"822286/stls/Clamp Lock Thumbscre... | CC0 | https://www.printables.com/model/822286 | data_0048.tar |
517442 | Twist keeper | <p>The<strong> Twist Keeper</strong> is a simple but well-designed product. You simply clip both loops onto the keeper and it will hold the loops together and prevent the string from untwisting when not in use. Using the Twist keeper means every time you take your string out of your bag it is ready to use.</p><p>The Tw... | [
"twist",
"archery",
"keeper",
"string"
] | Sports & Outdoor > Other Sports | [
"517442/images/image_1_compressed.jpg"
] | [
"517442/stls/twist_keeper.stl"
] | CC0 | https://www.printables.com/model/517442 | data_0048.tar |
608224 | Twist Lock Coffin Remix - Extra Grippy Toppers | <p>This remix to the <a href="https://www.printables.com/model/78085">Twist Lock Coffin</a> adds extra surface area to the topper and gear for a better grip when glued.<br><br><a href="https://www.printables.com/model/78085">Download the rest of the model here.</a></p><figure class="media"><oembed url="https://youtu.be... | [
"container",
"coffin",
"twistlock",
"3dprinty"
] | Seasonal designs > Autumn & Halloween | [
"608224/images/image_1_compressed.jpg",
"608224/images/image_2_compressed.jpg"
] | [
"608224/stls/Demo.stl",
"608224/stls/Extra Grip Gear.stl",
"608224/stls/Extra Grip Topper - Plain.stl",
"608224/stls/Extra Grip Topper - Scratch.stl",
"608224/stls/Extra Grip Topper - Skull and Scratch.stl",
"608224/stls/Extra Grip Topper - Skull.stl",
"608224/stls/Extra Grip Topper - Spider.stl"
] | CC-BY | https://www.printables.com/model/608224 | data_0048.tar |
81775 | Twist Lock Trick Box Vase | <p>This remix of the original <a href="https://www.printables.com/model/81777-twist-lock-trick-box-cylinder">Twist Lock Trick Box (cylinder)</a> uses a vase-shaped base.</p><p>Just like the original, this can be customized with different topper designs. Any topper created for the original will work with this version!</... | [
"box",
"puzzle",
"container",
"twisty",
"thingiverse"
] | Household > Other House Equipment | [
"81775/images/image_1_compressed.jpg"
] | [
"81775/stls/Gear.stl",
"81775/stls/Latch.stl",
"81775/stls/Lid.stl",
"81775/stls/Merged Spring.stl",
"81775/stls/Spring.stl",
"81775/stls/Topper.stl",
"81775/stls/Vase.stl"
] | CC-BY | https://www.printables.com/model/81775 | data_0048.tar |
131 | Twist Vase | <p>Here's a twisted vase I modelled up in Fusion 360. Printed in Fillamentum Vertigo Grey.</p>
| [
"vase",
"twist"
] | Household > Home Decor | [
"131/images/image_1_compressed.jpg"
] | [
"131/stls/vase.stl"
] | CC-BY | https://www.printables.com/model/131 | data_0048.tar |
215356 | Twisted Eilffel Tower | [
"eiffeltower"
] | Art & Design > Other Art & Designs | [
"215356/images/image_1_compressed.jpg"
] | [
"215356/stls/TwistyEiffel.stl"
] | CC0 | https://www.printables.com/model/215356 | data_0048.tar | |
2547 | twisted flower pot | <p>Designed this twisted flower pot in autodesk inventor for my girlfriend. might aswell share it with you! i printed this one in white PETG. but aslong as the flower pot stands inside you can also use pla or abs.</p>
| [
"pot",
"plant",
"flower",
"garden",
"flowerpot",
"outside"
] | Household > Outdoor & Garden | [
"2547/images/image_1_compressed.jpg",
"2547/images/image_2_compressed.jpg",
"2547/images/image_3_compressed.jpg"
] | [
"2547/stls/flower-pot.stl"
] | CC0 | https://www.printables.com/model/2547 | data_0048.tar |
1659809 | twisty thingy | [] | Toys & Games > Other Toys & Games | [
"1659809/images/image_1_compressed.jpg"
] | [
"1659809/stls/cool.stl"
] | CC-BY | https://www.printables.com/model/1659809 | data_0048.tar | |
353343 | Two bearing spool holder | <p>This is a low-friction spool holder. It uses two of 608ZZ bearings and a length of 8mm threaded rod to hold a cylinder on which the spool rests, that has ramped ends so the spool doesn't fall off.</p><p>The mount can hold spools of 32mm hole or larger, and up to 71mm wide.</p><p>The mounting shown in white is ... | [
"spoolholder",
"608bearing",
"crealityender3",
"608zz"
] | 3D Printers > Other Printer Parts & Upgrades | [
"353343/images/image_1_compressed.jpg"
] | [
"353343/stls/2BearingSpoolHolder.stl",
"353343/stls/MyBearingSpoolHolderMount.stl"
] | CC-BY | https://www.printables.com/model/353343 | data_0048.tar |
109012 | Two Okinawa Shisa | <p>the shisa are a variation of the <a href="https://en.wikipedia.org/wiki/Guardian_lions">guardian lions</a> from <a href="https://en.wikipedia.org/wiki/China">China</a>. From the <a href="https://en.wikipedia.org/wiki/Edo_period">Edo period</a>, they started to be called "guardian dogs" in general in mainland J... | [
"japan",
"okinawa",
"shisa"
] | Art & Design > Other Art & Designs | [
"109012/images/image_1_compressed.jpg",
"109012/images/image_2_compressed.jpg"
] | [
"109012/stls/okinawa_shisa.stl"
] | CC-BY | https://www.printables.com/model/109012 | data_0048.tar |
355559 | Two Way Bolt | <p>Saw on Youtube a Video by Robinson Foundry of a bolt like this (https://www.youtube.com/watch?v=cvi8A2XCK94) which he did cast later in metal.<br><br>I wanted to recreate this bolt in CAD because he didn't publish the files he made.<br><br>The nut slides freely up and down the bolt and is mesmerizing to watch.</p> | [
"two",
"bolt",
"impossible",
"way",
"foundry",
"robinson"
] | Toys & Games > Other Toys & Games | [
"355559/images/image_1_compressed.jpg",
"355559/images/image_2_compressed.jpg"
] | [
"355559/stls/Two Way Bolt Long.stl",
"355559/stls/Two Way Bolt.stl",
"355559/stls/Two Way Nut.stl"
] | GPL2.0 | https://www.printables.com/model/355559 | data_0048.tar |
797497 | Tyranitar Pokemon single print | <p>I wanted this in a single print, so I merged their files into 1 model.</p><h3>Print Settings</h3><p><strong>Supports:</strong></p><p>Yes</p><p><strong>Resolution: </strong></p><p>.15</p><p><strong>Infill:</strong></p><p>10</p><p> </p><p>Category: Sculptures</p> | [
"thingiverse"
] | Art & Design > Sculptures | [
"797497/images/image_1_compressed.jpg"
] | [
"797497/stls/Tyranitar2.2.stl"
] | CC-BY | https://www.printables.com/model/797497 | data_0048.tar |
64228 | Třídička českých korun | <h3>Třídička českých korun </h3><p>50Kč - 1Kč</p><p>stohovatelná</p><p>Pet-G </p><p>výška 0,2mm</p><p>infil 15%</p><p>tisknuto na psůša mini</p><h3><strong>použitý filament </strong><a href="https://www.prudel.cz/unishop/Tiskova-struna-Swift-PET-G-cervena-rubin-Print-Me-1-75mm-1kg-d1642.htm"><strong>>zde&l... | [
"coin",
"koruna",
"mince",
"coinsorter",
"tridicka"
] | Gadgets > Other Gadgets | [
"64228/images/image_1_compressed.jpg",
"64228/images/image_2_compressed.jpg",
"64228/images/image_3_compressed.jpg",
"64228/images/image_4_compressed.jpg",
"64228/images/image_5_compressed.jpg",
"64228/images/image_6_compressed.jpg",
"64228/images/image_7_compressed.jpg"
] | [
"64228/stls/10kč.stl",
"64228/stls/1Kč.stl",
"64228/stls/20kč.stl",
"64228/stls/2kč.stl",
"64228/stls/50kč.stl",
"64228/stls/5kč.stl"
] | CC-BY | https://www.printables.com/model/64228 | data_0048.tar |
742468 | U-scribe jig Uchwyt do trasowania blendy/maskownic | <p>Uchwyt ułatwiający docięcie blendy/maskownicy (krzywe ścienne)</p> | [
"furniture",
"woodwork",
"workshop",
"woodworking",
"tools",
"woodtools",
"furnituretools"
] | Hobby & Makers > Tools | [
"742468/images/image_1_compressed.jpg"
] | [
"742468/stls/Docisk 18.stl",
"742468/stls/Nakrętka 18.stl",
"742468/stls/Podstawa 18.stl"
] | CC-BY | https://www.printables.com/model/742468 | data_0048.tar |
1473574 | U-Terra Planter | <p>A modern U-shaped terracotta planter with elegant vertical grooves, designed for shelves and compact spaces. Its sculptural form adds a touch of architectural beauty to any room, while the warm earthy tone pairs perfectly with small green plants like succulents or zz plants. Ideal for minimalist interiors or as a st... | [
"vase",
"decoration",
"plate",
"plant",
"flower",
"planter",
"decor",
"deco",
"art",
"plane",
"home",
"plantpot",
"vasemode",
"vases",
"flowerpot",
"plants",
"flowervase",
"flowers",
"decorations",
"homedecor",
"planters",
"planterpot",
"decorative",
"homedecoration",
... | Household > Home Decor | [
"1473574/images/image_1_compressed.jpg"
] | [
"1473574/stls/arc double.stl"
] | CC0 | https://www.printables.com/model/1473574 | data_0048.tar |
300524 | U.S. Navy - Petty Officers - 3rd, 2nd, 1st Class | <p>These were designed with a flat-back to become wall, door, or bookcase mountable. The height of these designs, while laying on it's back, is 8.5 mm with the width at 100 mm. You can resize/rescale it for your printing pleasure.</p><p>You can now download the the <strong>Split</strong> or <strong>W... | [
"bird",
"ship",
"eagle",
"sailor",
"sea",
"class",
"insignia",
"military",
"unitedstatesnavy",
"usnavy",
"naval",
"rank",
"officer",
"chevron",
"usn",
"rankinsignia",
"enlisted",
"chevrons",
"enlistedrank",
"enlistedchevron",
"insignias",
"petty",
"rankinsignias",
"nco"... | Art & Design > Other Art & Designs | [
"300524/images/image_1_compressed.jpg",
"300524/images/image_2_compressed.jpg",
"300524/images/image_3_compressed.jpg",
"300524/images/image_4_compressed.jpg",
"300524/images/image_5_compressed.jpg",
"300524/images/image_6_compressed.jpg"
] | [
"300524/stls/PO Eagle_RithM.stl",
"300524/stls/PO1 Chevron_RithM.stl",
"300524/stls/PO1 USN_RithM.stl",
"300524/stls/PO2 Chevron_RithM.stl",
"300524/stls/PO2 USN_RithM.stl",
"300524/stls/PO3 Chevron_RithM.stl",
"300524/stls/PO3 USN_RithM.stl"
] | CC0 | https://www.printables.com/model/300524 | data_0048.tar |
1202897 | U1 10" Inch Rack Mount for Raspberry Pi 4 and TL-LS1005G | <p>[Update 7th of May 2025]:<br>Fixed the fitment issue for the switch, and also made a cutout hole for the Raspberry Pi 4's SD card slot.</p> | [
"mount",
"10",
"rack",
"rpi",
"one",
"rpi4",
"inch",
"rpi4b",
"1u",
"tl",
"tlls1005g",
"ls1005g",
"ls1005"
] | Hobby & Makers > Electronics | [
"1202897/images/image_1_compressed.jpg"
] | [
"1202897/stls/1U 10 inch - Raspberry Pi 4 and TL-LS1005G.stl"
] | CC-BY | https://www.printables.com/model/1202897 | data_0048.tar |
473329 | U1JO - Airbrush/Paint Miniature & Figure Holder | <p>My own design to paint/airbrush my minis/figures.</p>
<p>Included modular base/stand to 6 minis/figures.</p>
<p>Added magnetic 5mm as the option to make easy the management and stand. As an example you can use this from Amazon <a href="http://shorturl.at/mxyH7">http://shorturl.at/mxyH7</a></p>
<p><a href="https://pa... | [
"handle",
"grip",
"figure",
"miniature",
"paint",
"airbrush",
"thingiverse"
] | Art & Design > Other Art & Designs | [
"473329/images/image_1_compressed.jpg",
"473329/images/image_10_compressed.jpg",
"473329/images/image_11_compressed.jpg",
"473329/images/image_2_compressed.jpg",
"473329/images/image_3_compressed.jpg",
"473329/images/image_4_compressed.jpg",
"473329/images/image_5_compressed.jpg",
"473329/images/image... | [
"473329/stls/U1JO_-_Airbrush_-_FigureBase01_1.stl",
"473329/stls/U1JO_-_Airbrush_-_FigureBase02_1.stl",
"473329/stls/U1JO_-_Airbrush_-_FigureHolder.stl",
"473329/stls/U1JO_-_Airbrush_-_FigureMultiStand.stl",
"473329/stls/U1JO_-_Airbrush_-_FigureMultiStandCenter_1.stl",
"473329/stls/U1JO_-_Airbrush_-_Figur... | CC-BY | https://www.printables.com/model/473329 | data_0048.tar |
652807 | U2C mount for Switchwire | <p>Basic Switchwire or Enderwire mount for a U2C. </p><p>You will need 2 M5 10mm screws and t-nuts to mount this.. Then 4 M3 6mm (4 or 8 will work too) to mount the U2C to the mount. </p> | [
"switchwire",
"u2c"
] | 3D Printers > Voron Parts & Upgrades | [
"652807/images/image_1_compressed.jpg"
] | [
"652807/stls/U2C_Mount_4_Swithwire.stl"
] | GPL3.0 | https://www.printables.com/model/652807 | data_0048.tar |
770236 | Ubiquiti Unifi Bubble Level keychain | <p>Ubiquiti Unifi Bubble Level keychain</p> | [] | Costumes & Accessories > Props | [
"770236/images/image_1_compressed.jpg"
] | [
"770236/stls/Ubiquiti Unifi Bubble Level (6).stl"
] | CC0 | https://www.printables.com/model/770236 | data_0048.tar |
991521 | Ubiquiti UniFi Dream Machine Wall Mount | [
"wallmount",
"ubiquiti",
"unifi",
"udm",
"unifidreammachine"
] | Gadgets > Computers | [
"991521/images/image_1_compressed.jpg",
"991521/images/image_2_compressed.jpg",
"991521/images/image_3_compressed.jpg"
] | [
"991521/stls/UDM Wall mount.stl"
] | CC-BY | https://www.printables.com/model/991521 | data_0048.tar | |
1261195 | Ubiquiti Unifi Power Brick / PSU Wall Mount | <p>Simple wall mount for a UniFi power brick / PSU. For a brick that's 75x75x30 mm. Inspired by the linked remix mount, but wanted to add a through-hole so you can mount the brick in any orientation, including with the big cable through the bottom.<br><br>I printed it on a Bambulab A1 Mini with PLA and a 0.2mm nozzle. ... | [
"wallmount",
"ubiquiti",
"unifi"
] | Art & Design > Wall-mounted | [
"1261195/images/image_1_compressed.jpg",
"1261195/images/image_2_compressed.jpg",
"1261195/images/image_3_compressed.jpg"
] | [
"1261195/stls/unifi_power_brick_psu_wall_mount_mk2.stl"
] | CC-BY | https://www.printables.com/model/1261195 | data_0048.tar |
1692803 | UD4 - Dropship from Aliens | <p>This a a model of the UD4 Cheyenne Dropship from the movie Aliens.<br>The model comes with full load of features:<br>Deployable forward missile hardpoints<br>Deployable middle missile hardpoints<br>Retractable landing legs<br>Openable cargo bay door<br>Includes APC<br><br>The model is a kit and there is no glue need... | [
"ship",
"star",
"marines",
"aliens",
"drop",
"dropship",
"cheyenne",
"ud4"
] | Toys & Games > Vehicles | [
"1692803/images/image_1_compressed.jpg",
"1692803/images/image_10_compressed.jpg",
"1692803/images/image_2_compressed.jpg",
"1692803/images/image_3_compressed.jpg",
"1692803/images/image_4_compressed.jpg",
"1692803/images/image_5_compressed.jpg",
"1692803/images/image_6_compressed.jpg",
"1692803/image... | [
"1692803/stls/xxx_-_apc.stl",
"1692803/stls/xxx_-_apc_turret.stl",
"1692803/stls/xxx_-_apc_turret2.stl",
"1692803/stls/xxx_-_cockpit.stl",
"1692803/stls/xxx_-_cover_ds_2x.stl",
"1692803/stls/xxx_-_dropship_whole1.stl",
"1692803/stls/xxx_-_dropship_whole2.stl",
"1692803/stls/xxx_-_drop_ship.stl",
"16... | CC-BY | https://www.printables.com/model/1692803 | data_0048.tar |
92450 | Uholník | [] | Hobby & Makers > Tools | [
"92450/images/image_1_compressed.jpg",
"92450/images/image_2_compressed.jpg"
] | [
"92450/stls/uholnik_1.stl",
"92450/stls/uholnik_2.stl"
] | CC0 | https://www.printables.com/model/92450 | data_0048.tar | |
709186 | UK plug ground pin replacement adaptor | <p>ONLY USE ON PLUGS WITH A PLASTIC GROUND PIN NOT METAL ( where they use the plastic ground pin as a key to slide open the port for the other 2 live and neutral pins and not as an actual ground ).</p><p>I accidentally dropped my expensive 100W USB C charger and broke the plastic ground pin off so this is a 3d printed ... | [
"plug",
"socket",
"3pin",
"adaptor",
"adapters",
"ground",
"mains"
] | Hobby & Makers > Electronics | [
"709186/images/image_1_compressed.jpg",
"709186/images/image_2_compressed.jpg"
] | [
"709186/stls/ground pin w screw insert.stl",
"709186/stls/ground pin.stl"
] | CC-BY | https://www.printables.com/model/709186 | data_0048.tar |
724783 | UK Shopping Trolley Key Fob | <p>A simple shopping trolley key fob for UK shopping Trolleys replicating the £1 coins size and shape.</p> | [
"fob",
"token",
"uk",
"trolley"
] | 3D Printers > Accessories | [
"724783/images/image_1_compressed.jpg",
"724783/images/image_2_compressed.jpg"
] | [
"724783/stls/UK Trolley Token.stl"
] | CC0 | https://www.printables.com/model/724783 | data_0048.tar |
1229274 | UK Trolley Coin | <p>This is a basic trolley coin, print this to save having to use a £1 coin and risk not getting it back (its happened to me a few too many times)</p><p> </p><p><strong>**I've just added a V2 model which includes a bit for a key ring</strong>**</p><p> </p><p>We printed this over on YouTube:</p><figure class="... | [
"trolley",
"trolleytoken",
"trolleycoins",
"trolleycoin"
] | Household > Other House Equipment | [
"1229274/images/image_1_compressed.jpg",
"1229274/images/image_2_compressed.jpg",
"1229274/images/image_3_compressed.jpg",
"1229274/images/image_4_compressed.jpg",
"1229274/images/image_5_compressed.jpg"
] | [
"1229274/stls/Trolley Coin V2.stl",
"1229274/stls/Trolley Coin.stl"
] | CC-BY | https://www.printables.com/model/1229274 | data_0048.tar |
525944 | Ukrainian F16 fighter kit card | <p>A fun-yet-sobering reminder that one's sovereignty should always be fought for and that freedom isn't free. </p><p>Glory to the defenders… glory to Ukraine.</p><p>This one prints without supports in your resin printer.</p><p>If you found this useful, it would bring me great joy to see your work - so be sure to... | [
"military",
"ukraine",
"kitcard",
"f16fighter"
] | Tabletop Miniatures > Vehicles & Machines | [
"525944/images/image_1_compressed.jpg",
"525944/images/image_2_compressed.jpg"
] | [
"525944/stls/F16KitCard.stl"
] | CC0 | https://www.printables.com/model/525944 | data_0048.tar |
155210 | Ukranian Coat of Arms on Standup Base | <p>A version of the Ukrainian coat of arms on a small stand up base. It isn't quite a Javelin or Stinger, but hey, just display the solidarity and your love. </p><p>Fusion file is uploaded as well for whatever remixes you may need. Fusion file also includes an inverse concave version of the same profile.</p><p>Upl... | [
"ukraine",
"standwithukraine"
] | World & Scans > Historical Context | [
"155210/images/image_1_compressed.jpg",
"155210/images/image_2_compressed.jpg",
"155210/images/image_3_compressed.jpg"
] | [
"155210/stls/UKR_Trident_Stand_Single.stl"
] | CC0 | https://www.printables.com/model/155210 | data_0048.tar |
706300 | UK/Ireland Mains Plug Holder | <p>For neatly storing a plug with a cable real.</p> | [
"ukplug"
] | Household > Garage | [
"706300/images/image_1_compressed.jpg"
] | [
"706300/stls/ukplug_holder_2.stl"
] | GPL2.0 | https://www.printables.com/model/706300 | data_0048.tar |
269066 | Ultimate Drawer System V2 | <p>A improved version of the Ultimate Drawer System. I <a href="https://www.printables.com/model/17874-modular-drawer">recommend these drawers</a>, or just use the drawers from the original.</p><p>Designed to print with 0.4 nozzle and <strong>5% infill</strong>.<br><br>Changes include:<br> </p><ul><li>diagonal bac... | [
"organizer",
"storage",
"drawer",
"smallpartsstorage"
] | Hobby & Makers > Organizers | [
"269066/images/image_1_compressed.jpg",
"269066/images/image_2_compressed.jpg"
] | [
"269066/stls/shelf-10u.stl",
"269066/stls/shelf-2u.stl",
"269066/stls/shelf-4u.stl",
"269066/stls/shelf-6u.stl",
"269066/stls/shelf-8u.stl"
] | GPL2.0 | https://www.printables.com/model/269066 | data_0048.tar |
47060 | Ultimate Ear Saver | <p>After printing Martin_J.'s ear saver model I noticed that the part of the model where the stems go into holes was very weak. I also noticed that when the stems were inserted the holes increased in size slightly, pulling the layers apart and decreasing strength. In contrast cvincross's design was much harder to inser... | [
"covid19",
"coronavirus",
"earsaver"
] | Fashion > Other Fashion Accessories | [
"47060/images/image_1_compressed.jpg"
] | [
"47060/stls/ear_saver.stl",
"47060/stls/ear_saver_mk3_5pcs.stl"
] | CC0 | https://www.printables.com/model/47060 | data_0048.tar |
195716 | Ultimate honeycomb AA battery organizer | <p>I had had enough of AA batteries rumbling in the drawer. So I have designed an Ultimate Honeycomb Battery organizer.</p><p>This geometry provides high strength, high pack density and so versatile options of stacking the honeycombs - see attached photos.</p><p>Organizers can be aligned both horizontally, vertically a... | [
"thingiverse",
"batteryholder",
"aabattery",
"aabatteryholder",
"batterybox",
"batteryorganizer"
] | Household > Office | [
"195716/images/image_1_compressed.jpg",
"195716/images/image_2_compressed.jpg",
"195716/images/image_3_compressed.jpg",
"195716/images/image_4_compressed.jpg",
"195716/images/image_5_compressed.jpg",
"195716/images/image_6_compressed.jpg",
"195716/images/image_7_compressed.jpg",
"195716/images/image_8... | [
"195716/stls/aa_Rack_15.stl",
"195716/stls/aa_Rack_25.stl",
"195716/stls/aa_Rack_35.stl",
"195716/stls/aa_Rack_51.stl"
] | CC-BY | https://www.printables.com/model/195716 | data_0048.tar |
982263 | Ultimate Metric Knurled Thumb Screw Collection M3-M8 | <p>Collection of Metric Knurled Thumb Screw Collection including :</p><p> </p><p>M3x6, 8, 10, 12, 16, 20</p><p>M4x6, 8, 10, 12, 16, 20</p><p>M5x8, 10, 12, 16, 20, 25</p><p>M6x10, 12, 16, 20, 25</p><p>M8x 12, 16, 20, 25, 30</p><p> </p><p>For general purposes PETG, PLA works ok. For some demanding applica... | [
"knob",
"nut",
"tool",
"screws",
"design",
"knobs",
"screw",
"bolt",
"tools",
"metric",
"collection",
"bolts",
"knurled",
"ultimate",
"thumb",
"thumbscrew",
"thumbscrews"
] | Hobby & Makers > Tools | [
"982263/images/image_1_compressed.jpg",
"982263/images/image_2_compressed.jpg"
] | [
"982263/stls/M3x10.stl",
"982263/stls/M3x12.stl",
"982263/stls/M3x16.stl",
"982263/stls/M3x20.stl",
"982263/stls/M3x6.stl",
"982263/stls/M3x8.stl",
"982263/stls/M4x10.stl",
"982263/stls/M4x12.stl",
"982263/stls/M4x16.stl",
"982263/stls/M4x20.stl",
"982263/stls/M4x6.stl",
"982263/stls/M4x8.stl"... | CC-BY | https://www.printables.com/model/982263 | data_0048.tar |
68031 | Ultimate QR Code | <p>Hi folks,<br/>QR codes are used in a wide range an can be pretty useful. However, if you want to use a physical one you don't have many choices but printing it on paper. Here comes my relative simple way of creating and 3D printing one yourself, by utilizing the idea of Lithophanes. I will also add a fully parametri... | [
"wall",
"link",
"art",
"part",
"custom",
"qrcode",
"thingiverse",
"customized",
"wlan",
"wallart",
"reinforced",
"info",
"tracking",
"hyperlink",
"qrplate",
"tomorrowland"
] | Art & Design > 2D Plates & Logos | [
"68031/images/image_1_compressed.jpg",
"68031/images/image_10_compressed.jpg",
"68031/images/image_11_compressed.jpg",
"68031/images/image_12_compressed.jpg",
"68031/images/image_13_compressed.jpg",
"68031/images/image_14_compressed.jpg",
"68031/images/image_15_compressed.jpg",
"68031/images/image_16_... | [
"68031/stls/QR_Code___colored_Logo.stl",
"68031/stls/QR_code___colored_logo_and_frame.stl"
] | CC-BY | https://www.printables.com/model/68031 | data_0048.tar |
881967 | Ultimate Single Extruder Multi-Color & Multi-Material 3D Printing Guide | <p>Inspired by <a href="https://www.youtube.com/watch?v=m_SXRGGoTQo">Multipass Multicolor by Make Anything</a></p><p>Manually printing multi-color or multi-material objects is easy using the <a href="https://marlinfw.org/docs/gcode/M600.html">M600 command</a> (filament change procedure).</p><p> </p><h3>PrusaSlicer... | [
"multimaterial",
"multicolor",
"multipass",
"singleextruder",
"howto"
] | Hobby & Makers > Other Ideas | [
"881967/images/image_1_compressed.jpg",
"881967/images/image_2_compressed.jpg"
] | [
"881967/stls/avatar fire.stl",
"881967/stls/qrcode.stl"
] | CC-BY | https://www.printables.com/model/881967 | data_0048.tar |
911830 | Ultimate Tic-Tac-Toe board & pieces | <p>Ultimate Tic-tac-toe. Its grids within a grid! This twist on the classic game allows for more strategy and keeps you playing longer.<br><br>how to play:</p><p>1. <strong>The Board</strong>: Imagine a regular tic tac toe board. Now, in each of those nine squares, there's another tic-tac-toe board. So, you've got 9 mi... | [
"game",
"games",
"fun",
"easytoprint",
"boardgame",
"tictactoe"
] | Toys & Games > Board Games | [
"911830/images/image_1_compressed.jpg",
"911830/images/image_2_compressed.jpg"
] | [
"911830/stls/ultimate_tic_tac_toe_all_v1.stl",
"911830/stls/ultimate_tic_tac_toe_board_v1.stl",
"911830/stls/ultimate_tic_tac_toe_box_v1.stl",
"911830/stls/ultimate_tic_tac_toe_large_o_v1.stl",
"911830/stls/ultimate_tic_tac_toe_large_x_v1.stl",
"911830/stls/ultimate_tic_tac_toe_small_o_v1.stl",
"911830/... | CC0 | https://www.printables.com/model/911830 | data_0048.tar |
535224 | Ultra Fast Printing Easy Measure XY Skew Calibration Print | <p>Save time and filament with this super fast printing XY calibration print.</p><p>Print and measure on the print bed. <strong>Bed adhesion is critical when you print this model.</strong> Some materials will detach from the bed when it cools. Choose wisely.</p> | [
"calibration",
"marlin",
"calibrationtest",
"marlinfirmware",
"skew"
] | 3D Printers > Test Models | [
"535224/images/image_1_compressed.jpg",
"535224/images/image_2_compressed.jpg",
"535224/images/image_3_compressed.jpg"
] | [
"535224/stls/SKEW TEST v1.stl"
] | GPL3.0 | https://www.printables.com/model/535224 | data_0049.tar |
174147 | Ultra Stable Mobile and Tablet Stand / holder | <p>Fast and easy to print. <br>- Ultra-Stable. Mobile dont fall behind<br>- You cant broke it easy.<br>- Compatible with or withouth case<br>- Minimal use</p> | [
"holder",
"stand",
"mobile"
] | Gadgets > Other Gadgets | [
"174147/images/image_1_compressed.jpg",
"174147/images/image_2_compressed.jpg",
"174147/images/image_3_compressed.jpg",
"174147/images/image_4_compressed.jpg",
"174147/images/image_5_compressed.jpg",
"174147/images/image_6_compressed.jpg",
"174147/images/image_7_compressed.jpg"
] | [
"174147/stls/Movil Stand.stl"
] | GPL2.0 | https://www.printables.com/model/174147 | data_0049.tar |
272880 | Ultrafast and economical stringing test |
<p>There are already many calibration and test parts to get rid of the stringing of your printer, but this one is optimized so that you can print it quickly to achieve many iterations in a short period of time without wasting too much filament.</p>
<p>If you see that there still is no improvement you can stop the pr... | [
"test",
"calibration",
"thingiverse",
"calibrationtest",
"stringing",
"strings"
] | 3D Printers > Test Models | [
"272880/images/image_1_compressed.jpg",
"272880/images/image_2_compressed.jpg",
"272880/images/image_3_compressed.jpg"
] | [
"272880/stls/string_test_fast_pyramid.stl"
] | CC0 | https://www.printables.com/model/272880 | data_0049.tar |
867446 | Umbilical Clip w/ PTFE Guide and Filament Support Voron Logo | <p>Umbilical Clip with provisions for bowden tubes and cable support provided by 1.75mm filament. </p><p>For 7.2 - 7.5mm Umbilical Cables. Can be modified(step file included) to fit other umbilical diameters.</p><p>I am currently using the LDO Nitehawk tool head board for my V2.4 and the umbilical that came with t... | [
"clip",
"bowden",
"reverse",
"umbilical"
] | 3D Printers > Voron Parts & Upgrades | [
"867446/images/image_1_compressed.jpg",
"867446/images/image_2_compressed.jpg",
"867446/images/image_3_compressed.jpg",
"867446/images/image_4_compressed.jpg",
"867446/images/image_5_compressed.jpg",
"867446/images/image_6_compressed.jpg"
] | [
"867446/stls/Umbilical Clip Final.stl"
] | GPL3.0 | https://www.printables.com/model/867446 | data_0049.tar |
871052 | Uncoupler for Märklin H0 | <p>This uncoupler makes it easy to reach the couplers even when tracks are close. The model prints without supports.</p><p> </p><p> </p> | [] | Hobby & Makers > Other Ideas | [
"871052/images/image_1_compressed.jpg",
"871052/images/image_2_compressed.jpg"
] | [
"871052/stls/Uncoupler.stl"
] | CC0 | https://www.printables.com/model/871052 | data_0049.tar |
112031 | Undead Spider |
<p>A Undead Spider.</p>
Category: Toys & Games
| [
"spider",
"tabletop",
"dungeonsanddragons",
"thingiverse",
"enemy"
] | Toys & Games > Outdoor Toys | [
"112031/images/image_1_compressed.jpg",
"112031/images/image_2_compressed.jpg"
] | [
"112031/stls/undead_spider.stl"
] | CC-BY | https://www.printables.com/model/112031 | data_0049.tar |
749348 | Under desk mount for Arturia Minifuse 2 | <p>Same instructions as original by @Ulysse98:</p><p>Make sure to print the case part with the front lip against the bed, and the tray on its only flat side (lip facing up).</p><p>The case part slides on the Audio interface from the front and should have a snug fit. The tray should be mounted with the lip facing away f... | [
"holder",
"desk",
"audio",
"interface",
"under",
"arturia"
] | Gadgets > Audio | [
"749348/images/image_1_compressed.jpg",
"749348/images/image_2_compressed.jpg",
"749348/images/image_3_compressed.jpg",
"749348/images/image_4_compressed.jpg",
"749348/images/image_5_compressed.jpg",
"749348/images/image_6_compressed.jpg"
] | [
"749348/stls/minifuse2_case.stl",
"749348/stls/minifuse2_case_noholes_2mmwider.stl",
"749348/stls/Minifuse2_tray.stl",
"749348/stls/Minifuse2_tray_noholes_2mmwider.stl"
] | CC-BY | https://www.printables.com/model/749348 | data_0049.tar |
315668 | under desk remote holder | <p>holder for remotes, currently using it for my bedroom light remote</p> | [] | Hobby & Makers > Organizers | [
"315668/images/image_1_compressed.jpg",
"315668/images/image_2_compressed.jpg",
"315668/images/image_3_compressed.jpg"
] | [
"315668/stls/under desk remote holder.stl"
] | CC-BY | https://www.printables.com/model/315668 | data_0049.tar |
1038251 | Under desk simple Cable manager | <p>This cable manager is specifically designed for organizing and routing essential but infrequently accessed cables, such as HDMI, DisplayPort, USB, and power cords. It's the perfect solution for hiding cables under your desk, helping maintain a clean, clutter-free workspace, whether in a professional office or a gami... | [
"cable",
"organization",
"management",
"cablemanagement",
"cableholder"
] | Gadgets > Computers | [
"1038251/images/image_1_compressed.jpg"
] | [
"1038251/stls/cable-manager.stl"
] | GPL2.0 | https://www.printables.com/model/1038251 | data_0049.tar |
288362 | Under Desk/Wall Mount Spool Holder | <p>Under Desk/Wall Mount Spool Holder</p><p>Uses 2 skateboard bearings & whatever screws you want to use to attach to surface</p><p>Print in the position model is oriented in, spool needs support touching buildplate.</p><p>I recommend 50% infill for strength.</p> | [] | 3D Printers > Accessories | [
"288362/images/image_1_compressed.jpg"
] | [
"288362/stls/Spool_holder_axel.stl",
"288362/stls/Top_platsa_spool_holder.stl"
] | CC-BY | https://www.printables.com/model/288362 | data_0049.tar |
122918 | Under table cable holder | <p>Kabelhalter einfach unter die Tischplatte, den Schreibtisch, unter ein Regalbrett, etc. schrauben. So können Kabel geordnet geführt werden. Der Kabelhalter liegt in 3 verschiedenen Größen zum download bereit.</p> | [
"kabel"
] | Hobby & Makers > Organizers | [
"122918/images/image_1_compressed.jpg"
] | [
"122918/stls/Cable Organiser large.stl",
"122918/stls/Cable Organiser middle.stl",
"122918/stls/Cable Organiser small.stl"
] | CC-BY | https://www.printables.com/model/122918 | data_0049.tar |
1346239 | Undertale Annoying Dog | [] | Gadgets > Video Games | [
"1346239/images/image_1_compressed.jpg",
"1346239/images/image_2_compressed.jpg",
"1346239/images/image_3_compressed.jpg",
"1346239/images/image_4_compressed.jpg",
"1346239/images/image_5_compressed.jpg",
"1346239/images/image_6_compressed.jpg"
] | [
"1346239/stls/Annoying_Dog_Black.stl",
"1346239/stls/Annoying_Dog_White.stl",
"1346239/stls/Stand.stl"
] | CC-BY | https://www.printables.com/model/1346239 | data_0049.tar | |
142121 | Unicorn Drawing Template | <p>For one reason or another, I was forced to make this by the younglings.</p> | [
"drawing",
"template",
"unicorn"
] | Art & Design > 2D Plates & Logos | [
"142121/images/image_1_compressed.jpg"
] | [
"142121/stls/Unicorn-Template.stl"
] | CC0 | https://www.printables.com/model/142121 | data_0049.tar |
76254 | UniFi Camera G3 Instant Base | <p>UniFi's G3 Instant is a great little camera, but it tends to fall over, especially if there are children nearby. This model creates a basic stand for the camera, making it harder to tip over. Includes a rear opening for the power cable. </p> | [
"unifi",
"securitycamera"
] | Gadgets > Photo & Video | [
"76254/images/image_1_compressed.jpg",
"76254/images/image_2_compressed.jpg"
] | [
"76254/stls/Unifi Camera G3 Instant Base.stl"
] | CC0 | https://www.printables.com/model/76254 | data_0049.tar |
124153 | Unifi G3 Instant corner mount | <p>simple block for mounting the camera in the corner with the default base and strain relief</p><p>I had some spare SPAX screws here. If you want other screws, modify the attached AutoCAD file.</p><p> </p><p>BOM:</p><p>2x SPAX Screw 4mm for wall mounting</p><p>2x SPAX Screw 3,5mm for camera base mounting</p><p>&n... | [
"ubiquiti",
"unifi",
"protect",
"homesecurity"
] | Gadgets > Photo & Video | [
"124153/images/image_1_compressed.jpg",
"124153/images/image_2_compressed.jpg",
"124153/images/image_3_compressed.jpg",
"124153/images/image_4_compressed.jpg"
] | [
"124153/stls/Unifi G3 Instant Mount.stl"
] | CC-BY | https://www.printables.com/model/124153 | data_0049.tar |
45923 | Unifi Mesh Vertical Stand | <p>Simple vertical stand for Unifi Mesh AC. First version had more robust legs but after I printed it I realized it was not necessary so I've re-designed it. Open scad source file included and it can be easily modified if necessary.</p>
<h3>Print instructions</h3><p>I've printed it using transparent Prusament PETG, 0.2... | [
"unifi",
"verticalstand"
] | Hobby & Makers > Other Ideas | [
"45923/images/image_1_compressed.jpg",
"45923/images/image_2_compressed.jpg"
] | [
"45923/stls/unifi-mesh-vertical-stand.stl"
] | CC0 | https://www.printables.com/model/45923 | data_0049.tar |
710997 | Unifi PoE Chime desk stand | [] | Hobby & Makers > Electronics | [
"710997/images/image_1_compressed.jpg",
"710997/images/image_2_compressed.jpg",
"710997/images/image_3_compressed.jpg",
"710997/images/image_4_compressed.jpg"
] | [
"710997/stls/Ubiquiti PoE Doorbell Pro Speaker Stand v2 v1.stl"
] | CC0 | https://www.printables.com/model/710997 | data_0049.tar | |
183634 | Unifi rack mount | <p>Unifi rack mount</p> | [
"unifiswitch"
] | Learning > Engineering | [
"183634/images/image_1_compressed.jpg"
] | [
"183634/stls/Unifi_rack_mount.stl"
] | CC0 | https://www.printables.com/model/183634 | data_0049.tar |
768996 | Unifi U6 Lite Horizontal Wall Mount | <p>Unifi's 'UFO' WAPs have their antennas optimized for ceiling-mount applications.</p><p>This mount allows you to wall mount them in the correct orientation. It doesn't require the original mounting ring (great for used WAPs without mounting materials) and has two separate methods of locking the WAP in place (one of w... | [
"mount",
"wallmount",
"ubiquiti",
"unifi",
"u6lite"
] | Hobby & Makers > Electronics | [
"768996/images/image_1_compressed.jpg"
] | [
"768996/stls/U6_Lite_Wall_Mount-ABS_Stamped.stl",
"768996/stls/U6_Lite_Wall_Mount-PLA_Stamped.stl",
"768996/stls/U6_Lite_Wall_Mount.stl"
] | CC-BY | https://www.printables.com/model/768996 | data_0049.tar |
922084 | UnipolMove car Sun Visor clip (DESCRIPTION) | <p>I printed it 98% so it pressfits into position. Vary depending on the tolerances of your printer which is surely better than mine.<br><br>Stampato in scala 98% cosi che si incastri perfettamente a pressione, vedete voi in base alle tolleranze dimensionali della vostra stampante.</p> | [
"clip",
"car",
"auto",
"move",
"visor",
"telepass",
"parasole",
"visierina",
"unipol",
"unipolmove"
] | Hobby & Makers > Automotive | [
"922084/images/image_1_compressed.jpg",
"922084/images/image_2_compressed.jpg",
"922084/images/image_3_compressed.jpg"
] | [
"922084/stls/UnipolMove.stl"
] | CC0 | https://www.printables.com/model/922084 | data_0049.tar |
1510729 | Universal 3D-Printable Spring Latch Mechanism (No Supports, Fully Modular) | <p>🌟 <strong>Universal 3D-Printable Spring Latch Mechanism</strong></p><p><strong>A reliable, support-free, fully modular system for connecting 3D-printed parts.</strong><br>Import it. Place it. Combine. Done.</p><p>🎥 <strong>YouTube Tutorial</strong></p><div data-youtube-video=""><iframe class="editor-youtube" width... | [
"parametric",
"press",
"box",
"3d",
"print",
"container",
"clip",
"support",
"design",
"modular",
"mechanical",
"mechanism",
"part",
"spring",
"fusion360",
"360",
"fusion",
"free",
"fit",
"snap",
"click",
"snapfit",
"button",
"printable",
"connector",
"latch",
"un... | Hobby & Makers > Mechanical Parts | [
"1510729/images/image_1_compressed.jpg",
"1510729/images/image_2_compressed.jpg",
"1510729/images/image_3_compressed.jpg",
"1510729/images/image_4_compressed.jpg",
"1510729/images/image_5_compressed.jpg",
"1510729/images/image_6_compressed.jpg",
"1510729/images/image_7_compressed.jpg"
] | [
"1510729/stls/BIG_ExampleBox_Empty.stl",
"1510729/stls/BIG_ExampleBox_WithLatch.stl",
"1510729/stls/BIG_ExampleLid_Empty.stl",
"1510729/stls/BIG_ExampleLid_WithLatch.stl",
"1510729/stls/BIG_SpringButton_AutoSnap.stl",
"1510729/stls/BIG_SpringButton_FingerPress_3mm6mm.stl",
"1510729/stls/BIG_SpringButton... | CC0 | https://www.printables.com/model/1510729 | data_0049.tar |
1128131 | Universal adapter LEGO Duplo for wooden train track | <p>This universal adpter, to its special design, fits all popular wooden railway tracks.<br> </p><p>Compatibility:</p><ul><li>IKEA Lillabo</li><li>BigJigs</li><li>LIDL train</li><li>BRIO</li><li>LEGO Duplo</li></ul><p><strong>According to the license, you can also use these files commercially, but according to the... | [
"ikea",
"wood",
"track",
"train",
"brio",
"woodentrain",
"wooden",
"woodentrack",
"lillabo",
"briocompatible",
"bigjigs",
"briotrack"
] | Toys & Games > Building Toys | [
"1128131/images/image_1_compressed.jpg",
"1128131/images/image_2_compressed.jpg",
"1128131/images/image_3_compressed.jpg",
"1128131/images/image_4_compressed.jpg",
"1128131/images/image_5_compressed.jpg",
"1128131/images/image_6_compressed.jpg"
] | [] | GPL3.0 | https://www.printables.com/model/1128131 | data_0049.tar |
686964 | Universal bottle/bidon holder with fidlock twist mechanism | <p>bottle holder with fidlock twist mechanism, NOT COMAPTIBLE with original fidlock base. </p><p> </p><p>BOM:</p><ol><li>250-350mm Reusable cable ties with 8mm wide ==> <a href="https://www.aliexpress.com/item/1005004719548974.html?spm=a2g0o.productlist.main.3.71dfzN4QzN4Q5E&algo_pvid=8642d7f7-79b2-4eb... | [
"bottle",
"bike",
"mtb",
"waterbottle",
"bottleholder",
"cycling",
"roadbike",
"bidon",
"bottlecage",
"waterbottleholder",
"fidlock",
"fidlocktwist"
] | Sports & Outdoor > Outdoor Sports | [
"686964/images/image_1_compressed.jpg",
"686964/images/image_2_compressed.jpg",
"686964/images/image_3_compressed.jpg",
"686964/images/image_4_compressed.jpg"
] | [
"686964/stls/Connector left twist no magnet with little bump.stl",
"686964/stls/Connector left twist no magnet.stl",
"686964/stls/Connector left twist.stl",
"686964/stls/Connector right twist no magnet with little bump.stl",
"686964/stls/Connector right twist no magnet.stl",
"686964/stls/Connector right t... | CC-BY | https://www.printables.com/model/686964 | data_0049.tar |
285722 | Universal connectable storage - cabletie version | <p>A simple and easy to print container for various items.</p><ul><li><strong>SOLID model file </strong>- print with <i><strong>0% infill</strong></i> and <i><strong>no top layers</strong></i> or in vase mode.</li><li>scalable in XYZ - fit your needs.</li><li>2 side interlocking with same XY scale.</li><li>additional v... | [
"storage",
"workshop",
"vasemode",
"slide",
"containers",
"cableties"
] | Hobby & Makers > Organizers | [
"285722/images/image_1_compressed.jpg",
"285722/images/image_2_compressed.jpg",
"285722/images/image_3_compressed.jpg",
"285722/images/image_4_compressed.jpg",
"285722/images/image_5_compressed.jpg",
"285722/images/image_6_compressed.jpg"
] | [
"285722/stls/V2-frtech-dove18-female mount.stl",
"285722/stls/V2-frtech-dove18-male mount.stl",
"285722/stls/V2-frtech_slide_2Xwallmount40-40.stl",
"285722/stls/V2-frtech_slide_4Xwallmount40-40.stl",
"285722/stls/V2-frtech_slide_vase40-40-100mm-4way.stl",
"285722/stls/V2-frtech_slide_vase40-40-100mm-femal... | GPL3.0 | https://www.printables.com/model/285722 | data_0049.tar |
852700 | Universal Controller Mount (Switch/Xbox/PS4/PS5/Series X/Etc) - No supports/one piece | <p>This is a simple update of my original design <a href="https://www.thingiverse.com/thing:3803382">https://www.thingiverse.com/thing:3803382</a> with only 1 hole for a screw at a request of thingiverse user parski (thanks for the suggestion).</p>
<p>Minimalistic design meant to function for most all controller types.... | [
"thingiverse"
] | Gadgets > Other Gadgets | [
"852700/images/image_1_compressed.jpg",
"852700/images/image_2_compressed.jpg",
"852700/images/image_3_compressed.jpg",
"852700/images/image_4_compressed.jpg"
] | [
"852700/stls/3dcdcontrollermount1screw.stl"
] | CC-BY | https://www.printables.com/model/852700 | data_0049.tar |
84520 | Universal Ergonomic Clip v1 | <p>Just print in place no support, the big hole is for point finger so its more ergonomic when you squeez the handles. This clip can be used everywhere from household to workshop. Printed in PETG 20 infill.</p><p>Pls rate and comment.</p> | [
"holder",
"clip",
"bagclip",
"universal",
"ergonomic"
] | Gadgets > Other Gadgets | [
"84520/images/image_1_compressed.jpg",
"84520/images/image_2_compressed.jpg",
"84520/images/image_3_compressed.jpg"
] | [
"84520/stls/Bag Clip v1 v2.stl"
] | CC-BY | https://www.printables.com/model/84520 | data_0049.tar |
1208132 | Universal Filament Clip | <p>This is a clip compatible with different brands of spools, designed to make organization easier and avoid headaches when handling filaments.</p><p> </p><p><strong>What are the benefits?</strong></p><p>Making your life easier with Quick Insertion.</p><p>Compatible with different Spool Brands and for filame... | [
"spool",
"holder",
"filament",
"clip",
"clamp",
"universal",
"clips",
"filamentholder",
"filamentclip",
"filamentclamp",
"filamentclip175mm",
"filamentspoolclip",
"spoolclip",
"filamentdiameters"
] | 3D Printers > Accessories | [
"1208132/images/image_1_compressed.jpg",
"1208132/images/image_2_compressed.jpg",
"1208132/images/image_3_compressed.jpg",
"1208132/images/image_4_compressed.jpg",
"1208132/images/image_5_compressed.jpg"
] | [
"1208132/stls/Universal Filament Clip v2.stl"
] | CC-BY | https://www.printables.com/model/1208132 | data_0049.tar |
1055011 | Universal improved USB-C / Micro-USB / Lightning Port Cleaner | <p>This is another usb-c/lightning port cleaner improved and hardened variant that can be used as key chain and also has a flat surface large enough for large hands but also has enough space for own advertisement stickers. Could also be used as tooth picker (although not recommended).</p><p>It has a thickness of 0.8mm,... | [
"customizable",
"usb",
"dirt",
"tooth",
"tools",
"lightning",
"connector",
"mobile",
"usbc",
"port",
"cleaner",
"dirtyclean",
"mobilephone",
"picker"
] | Gadgets > Computers | [
"1055011/images/image_1_compressed.jpg",
"1055011/images/image_2_compressed.jpg"
] | [
"1055011/stls/usb_cleaner.stl"
] | CC-BY | https://www.printables.com/model/1055011 | data_0049.tar |
1045094 | Universal Peg Board Peg System - Caliper Holder | <p>Nice simple caliper holder for a pegboard. Depending on your calibers it might hang down at slightly different angles.</p><p>Prints just fine with the base down and no supports.</p> | [
"pegboard",
"pegboardholder"
] | Hobby & Makers > Organizers | [
"1045094/images/image_1_compressed.jpg"
] | [
"1045094/stls/Caliper Holder.stl"
] | CC-BY | https://www.printables.com/model/1045094 | data_0049.tar |
223391 | Universal spool holder for Prusa MINI+ Base | <p>This design is definitely an over engineered universal spool holder and it's built on the Lazy Susan made by humming.</p><p>It uses 3 arms to lock onto the spool and sits on the base of the Lazy Susan and bearing to allow seamless movement. The arms do not have to be tightly locked onto the filament spool, mine is n... | [
"prusa",
"spool",
"filament",
"spoolholder",
"universal",
"universalmount",
"prusamini",
"prusaminiplus"
] | 3D Printers > Prusa Parts & Upgrades | [
"223391/images/image_1_compressed.jpg",
"223391/images/image_2_compressed.jpg",
"223391/images/image_3_compressed.jpg",
"223391/images/image_4_compressed.jpg",
"223391/images/image_5_compressed.jpg"
] | [
"223391/stls/Spool holder - Arm.stl",
"223391/stls/Spool holder - Base.stl"
] | CC-BY | https://www.printables.com/model/223391 | data_0049.tar |
1739103 | Universal Triangular Key - For Gas/Electric Meters - Utility Tool | <p><strong>Universal Triangular Access Key for Utility Meters and Control Cabinets.</strong> A durable and reliable tool designed to easily open technical enclosures, gas meters, electricity panels, and water valves.</p><p>⚠ <strong>CRITICAL PRINT NOTE:</strong> Do NOT print this tool in standard PLA. PLA is too brittl... | [
"triangular",
"functionalprint",
"gasmeter",
"petgprint",
"absprint",
"utilitykey",
"enclosurekey",
"traingularkey",
"technicaltool",
"electricpanel",
"meterkey"
] | Household > Other House Equipment | [
"1739103/images/image_1_compressed.jpg",
"1739103/images/image_2_compressed.jpg",
"1739103/images/image_3_compressed.jpg",
"1739103/images/image_4_compressed.jpg",
"1739103/images/image_5_compressed.jpg"
] | [
"1739103/stls/chiave triangolare.stl"
] | CC-BY | https://www.printables.com/model/1739103 | data_0049.tar |
1253773 | Universal Water Bottle Dryer | <p>Print in PETG and enjoy.</p> | [
"kitchen",
"opener",
"bottle",
"water",
"cap",
"dryer",
"dishwasher",
"clean",
"waterbottle",
"bottleholder",
"bottledryer",
"bottledrying",
"slick"
] | Household > Kitchen | [
"1253773/images/image_1_compressed.jpg",
"1253773/images/image_2_compressed.jpg",
"1253773/images/image_3_compressed.jpg"
] | [
"1253773/stls/Bottle Dryer v1.stl",
"1253773/stls/Bottle Dryer v3.stl",
"1253773/stls/Bottle Dryer v4.stl"
] | CC0 | https://www.printables.com/model/1253773 | data_0049.tar |
1520484 | Universal wide angle viewfinder V2 (large FOV, smaller image) | <p>Another attempt to design a cheap and easy to make wide angle viewfinder for <a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.printables.com/model/1461053-fat-shot-617-medium-format-6x17-modular-panoramic"><strong>Fat Shot 617</strong></a> and <a target="_blank" r... | [
"camera",
"largeformat",
"viewfinder",
"wideangle",
"mediumformat",
"6x17",
"617"
] | Gadgets > Photo & Video | [
"1520484/images/image_1_compressed.jpg",
"1520484/images/image_2_compressed.jpg",
"1520484/images/image_3_compressed.jpg",
"1520484/images/image_4_compressed.jpg",
"1520484/images/image_5_compressed.jpg",
"1520484/images/image_6_compressed.jpg",
"1520484/images/image_7_compressed.jpg",
"1520484/images... | [
"1520484/stls/VF045 V1 Shoe Mount Long.stl",
"1520484/stls/VF045 V1 Shoe Mount Short.stl",
"1520484/stls/VF045 V2 Eyepiece 20 mm.stl",
"1520484/stls/VF045 V2 Housing Front Embedded Shoe Mount.stl",
"1520484/stls/VF045 V2 Housing Front.stl",
"1520484/stls/VF045 V2 Housing Rear Embedded Shoe Mount.stl",
"... | CC0 | https://www.printables.com/model/1520484 | data_0049.tar |
548977 | Universal/Skadis spool holder V2 | <p>This is a new version of my old Skadis peg board spool holder. I have renamed this “universal” because it works with any of my other universal slide mounts. Currently there are options for the following mountings which are all available <a href="https://www.printables.com/model/319766-multi-function-display-stands/f... | [
"spoolholder",
"filamentspoolholder",
"pegboard",
"universal",
"skadis",
"filamentholder",
"pegboardmount",
"ikeaskadis",
"skadisikea",
"ikeaploga",
"ploga"
] | 3D Printers > Other Printer Parts & Upgrades | [
"548977/images/image_1_compressed.jpg",
"548977/images/image_2_compressed.jpg",
"548977/images/image_3_compressed.jpg",
"548977/images/image_4_compressed.jpg",
"548977/images/image_5_compressed.jpg",
"548977/images/image_6_compressed.jpg"
] | [
"548977/stls/Skadis Spool Holder roller mount V2 (MMU2 rod 120mm).stl",
"548977/stls/Skadis Spool Holder roller mount V2 (Standard - 100mm).stl",
"548977/stls/Skadis Spool Holder roller mount V2 (Stubby - 80mm).stl",
"548977/stls/Skadis Spool Holder V2 rod (Standard - 100mm).stl",
"548977/stls/Skadis Spool ... | CC0 | https://www.printables.com/model/548977 | data_0049.tar |
97835 | Univerzální podstavec / Universal base (pedestal) | <p>Univerzální podstavec pod figurku</p><p>Universal pedestal under the figurine</p> | [
"support",
"mount",
"foot",
"base",
"pedestal",
"plinth",
"zakladna",
"podstavec",
"easel"
] | Toys & Games > Action Figures & Statues | [
"97835/images/image_1_compressed.jpg"
] | [
"97835/stls/podstavec hranaty.stl",
"97835/stls/podstavec.stl"
] | CC0 | https://www.printables.com/model/97835 | data_0049.tar |
344996 | Unox paté cap | <p>Because the vegetarian paté from Unox never has a lid included I designed one myself. It fits all the small Unox paté cans.</p> | [
"lid",
"cap"
] | Household > Kitchen | [
"344996/images/image_1_compressed.jpg",
"344996/images/image_2_compressed.jpg"
] | [
"344996/stls/Unox_cap_DEF.stl"
] | CC0 | https://www.printables.com/model/344996 | data_0049.tar |
838799 | Unravelling Man | <p>A piece of wall art of a mini prusa spool unravelling an exit sign man.<br>Depending on your viewpoint it could be creating the man.</p><p><br>Build details:</p><ul><li>You will need to glue a cutoff strip of filament to join the mans body to the spool. There is a 2mm hole in both to join the parts so it will fit al... | [
"spool",
"running",
"art",
"wallmount",
"wallart"
] | Art & Design > Wall-mounted | [
"838799/images/image_1_compressed.jpg",
"838799/images/image_2_compressed.jpg",
"838799/images/image_3_compressed.jpg"
] | [
"838799/stls/arm.stl",
"838799/stls/body.stl",
"838799/stls/filament.stl",
"838799/stls/head.stl",
"838799/stls/leg.stl",
"838799/stls/spool_base.stl",
"838799/stls/spool_top.stl"
] | CC0 | https://www.printables.com/model/838799 | data_0049.tar |
946125 | Unscrewing Aid / Aufdrehhilfe, opener for CO² carbonator bottles | <p>Combination of PETG and TPU A95, Important: Perimeter 4 or 5, Infill doesn't matter 15%</p> | [
"tpu",
"petg"
] | Healthcare > Medical Tools | [
"946125/images/image_1_compressed.jpg"
] | [
"946125/stls/Soda-Club-Öffner v8.stl"
] | CC-BY | https://www.printables.com/model/946125 | data_0049.tar |
596644 | unsolvable riddle | <p>so...what is more funny than see your friend trying to solve an unsolvable puzzle ??</p><p><strong>make sure that you insert the coin in the middle of the print !!</strong></p><p>the diameter of the coin is 22mm<br><br>have fun !<br><br> </p><figure class="media"><oembed url="https://www.youtube.com/shorts/VqzI... | [] | Toys & Games > Puzzles & Brain-teasers | [
"596644/images/image_1_compressed.jpg"
] | [
"596644/stls/impossibleCoinRiddle.stl"
] | GPL2.0 | https://www.printables.com/model/596644 | data_0049.tar |
512604 | UPDATED: Studio Monitor Stands / Speaker Stands | <h4>Update 26.09.2025</h4><p>Added rotated clamp after <a href="https://www.printables.com/@EmilioHerrad_1195611">@EmilioHerrad</a> request.</p><h4>Updated</h4><p>Chose to update my model for cleaner, more functional and less material heavy desing. Added different lenghts of tubes, clamp sizes to accommodate Ikea stand... | [
"speakermount",
"monitorstand",
"speakerstand",
"studiomonitor",
"reproduktor",
"studiomonitors",
"studiomonitorstand"
] | Gadgets > Audio | [
"512604/images/image_1_compressed.jpg"
] | [
"512604/stls/base.stl",
"512604/stls/clamp_rotated_90_degrees.stl",
"512604/stls/clamp_screw_1_cut.stl",
"512604/stls/clamp_screw_1_full.stl",
"512604/stls/clamp_v2_25mm.stl",
"512604/stls/clamp_v2_35mm.stl",
"512604/stls/tube_long_200_mm.stl",
"512604/stls/tube_mid_150_mm.stl",
"512604/stls/tube_sh... | CC0 | https://www.printables.com/model/512604 | data_0049.tar |
505239 | Update: Düse für Solarbrunnen / Nozzle for solar fountain | <p>31.07.24 Update: thicker stem (4 walls at 100% infill) // dickerer Stiel</p><p>Update: the new nozzle (18cm) looks like a flower :)</p><p> </p><p>Nozzle for solar fountain with <strong>8mm</strong> outlet (mini fountain for balcony, terrace or similar).</p><p>My wife wanted a small fountain on the balcony - as ... | [] | Household > Outdoor & Garden | [
"505239/images/image_1_compressed.jpg",
"505239/images/image_2_compressed.jpg",
"505239/images/image_3_compressed.jpg",
"505239/images/image_4_compressed.jpg"
] | [
"505239/stls/1 x Balkonbrunnen 25mm Blume_NEU.stl"
] | CC-BY | https://www.printables.com/model/505239 | data_0049.tar |
727740 | Upgraded 3D Print Shrek Croc Charms/Jibbitz Better Version | <p>I made the base of the ears stronger and enlarged them.</p><p>I smoothed out the back of the nose and enlarged it. </p><p> </p><p><strong>NOSE</strong></p><p>Infill 20%</p><p>Supports: <i>yes</i></p><p>0.2 quality</p><p>PETG or PLA Filament</p><p> </p><p><strong>EARS</strong></p><p>Infill 20%</p><p>Su... | [] | Fashion > Other Fashion Accessories | [
"727740/images/image_1_compressed.jpg",
"727740/images/image_2_compressed.jpg"
] | [
"727740/stls/BothV2.stl",
"727740/stls/OnlyEars.stl",
"727740/stls/OnlyNose.stl"
] | CC-BY | https://www.printables.com/model/727740 | data_0049.tar |
109920 | Upgraded filament spool holder and threaded guide | <p>This is a partial remix of the spool holder and filament guide for the Ikea Lack Table design. It includes a modified design for the spool holder that uses 608 bearings - I found the original design a bit noisy and had some spare bearings, so this is the end result.</p><p>I also wanted a threaded filament guid... | [
"spool",
"holder",
"lack",
"guide"
] | 3D Printers > Other Printer Parts & Upgrades | [
"109920/images/image_1_compressed.jpg",
"109920/images/image_2_compressed.jpg",
"109920/images/image_3_compressed.jpg",
"109920/images/image_4_compressed.jpg"
] | [
"109920/stls/Filament Roller system plus threaded guide.stl"
] | CC-BY | https://www.printables.com/model/109920 | data_0049.tar |
680578 | Uplift Desk Keypad Headphone Hook (flush keypad) | <p>This remix of the original design changes the screw holes to slots. This allows it to work with the flush keypad (<a href="https://www.upliftdesk.com/advanced-comfort-flush-keypad-by-uplift-desk/">https://www.upliftdesk.com/advanced-comfort-flush-keypad-by-uplift-desk/</a>), where the original was designed to work o... | [
"headphones",
"headphonehook",
"headphonehanger",
"uplift",
"upliftdesk",
"upliftstandingdesk"
] | Household > Office | [
"680578/images/image_1_compressed.jpg"
] | [
"680578/stls/upliftdesk_headphone_hook_remix.stl"
] | CC-BY | https://www.printables.com/model/680578 | data_0049.tar |
837964 | Upside Down Bottle Holder | [
"shampoo",
"shampooholder",
"shampoobottleholder"
] | Household > Bathroom | [
"837964/images/image_1_compressed.jpg",
"837964/images/image_2_compressed.jpg"
] | [
"837964/stls/My Shampoo holder v2_topped.stl"
] | CC0 | https://www.printables.com/model/837964 | data_0049.tar | |
100975 | Upside-Down(gyroscopic) Spinning Top | <p>Putting a gcode, but in case:</p><ul><li>100% infill</li><li>.15-.2 resolution</li><li>Any material should be fine(PLA- 205-210celc)</li><li>Lower print speeds(PLA- 40-50mm/s)</li><li>Supports on plate only upside down</li></ul><p>If you enjoy my work, don't forget to like!</p> | [] | Toys & Games > Other Toys & Games | [
"100975/images/image_1_compressed.jpg",
"100975/images/image_2_compressed.jpg"
] | [
"100975/stls/inverse top.stl"
] | CC0 | https://www.printables.com/model/100975 | data_0049.tar |
1104432 | US General Mini Toolbox Gridfinity For Smaller Printers | <p>For top organizer, print 2 as they mirror. </p><p>For drawer organizer, there are 2 pieces as there is an odd number of slots </p> | [] | Hobby & Makers > Organizers | [
"1104432/images/image_1_compressed.jpg",
"1104432/images/image_2_compressed.jpg",
"1104432/images/image_3_compressed.jpg"
] | [
"1104432/stls/Mini Toolbox bottom drawer Pt 1.stl",
"1104432/stls/Mini Toolbox bottom drawer Pt 2.stl",
"1104432/stls/Mini Toolbox top drawer Pt 1.stl",
"1104432/stls/Mini Toolbox top drawer Pt 2.stl",
"1104432/stls/Mini Toolbox Top Organizer .stl"
] | CC0 | https://www.printables.com/model/1104432 | data_0049.tar |
149622 | US milk jug screw on spout |
<p>Screw on spout for US milk jug. Print 1.02x for PLA</p>
Category: Outdoor & Garden
| [
"reuse",
"wateringcan",
"thingiverse",
"spout",
"milkjug"
] | Household > Outdoor & Garden | [
"149622/images/image_1_compressed.jpg",
"149622/images/image_2_compressed.jpg"
] | [
"149622/stls/US_Milk_jug_screw_on_spout.stl"
] | CC-BY | https://www.printables.com/model/149622 | data_0049.tar |
655528 | US Quarter Coin Holder | <p>It holds about $30 worth of quarters. Print it in basically anything. 2-3 perimeters with 10-15% infill. Layer height really doesn't matter either since it's printing straight up. The one in the photos is 0.1mm, but higher would likely look just fine as well.</p>
Category: Organization | [
"coin",
"coins",
"thingiverse"
] | Household > Office | [
"655528/images/image_1_compressed.jpg",
"655528/images/image_2_compressed.jpg",
"655528/images/image_3_compressed.jpg"
] | [
"655528/stls/quarter_holder.stl"
] | CC-BY | https://www.printables.com/model/655528 | data_0049.tar |
274727 | USB Cable Reels | <p>Simple USB Cable Reels</p><p>Available in three sizes:</p><ul><li>67×23mm</li><li>50×23mm</li><li>47×18mm</li></ul><p>Print with 0.4mm nozzle at 0.2mm layers using ASA or PETG. No supports needed.</p><p>Add a bit of grease to help it turn smoothly. Pull both ends to unwind your cable.</p><p> </p><figure class="... | [] | Household > Other House Equipment | [
"274727/images/image_1_compressed.jpg",
"274727/images/image_2_compressed.jpg",
"274727/images/image_3_compressed.jpg",
"274727/images/image_4_compressed.jpg",
"274727/images/image_5_compressed.jpg",
"274727/images/image_6_compressed.jpg"
] | [
"274727/stls/47mm OD bottom reel.stl",
"274727/stls/47mm OD top reel.stl",
"274727/stls/50mm OD bottom (3 ft cable).stl",
"274727/stls/50mm OD top (3ft cable).stl",
"274727/stls/67mm OD bottom (6ft cable).stl",
"274727/stls/67mm OD top (6ft cable).stl"
] | CC-BY | https://www.printables.com/model/274727 | data_0049.tar |
207818 | USB Cable Tester Enclosure |
<p>The Mechanic DT3 USB cable tester PCB confirms continuity on a variety of cables with USB-A, Micro-USB, USB-C and Lightning connectors. This is a case for it.</p>
<p>The PCB fits in snug and the lid is a friction fit. If you want the lid more secure just use a few drops of super glue.</p>
<p><a href="https://www.... | [
"usb",
"tester",
"thingiverse",
"usbcable",
"cabletester"
] | Hobby & Makers > Electronics | [
"207818/images/image_1_compressed.jpg",
"207818/images/image_2_compressed.jpg",
"207818/images/image_3_compressed.jpg"
] | [
"207818/stls/DT3bodyv2.stl",
"207818/stls/DT3top.stl"
] | CC-BY | https://www.printables.com/model/207818 | data_0049.tar |
1301283 | USB Cover (Easy print) | <p>This is a simple USB-A cover. I printed with 15% infill and it took about 10 minutes. I used PLA, but I think other filaments will work. If you have any questions, please let me know. I'll create a USB-C cover if I get 200 likes.</p> | [
"cover",
"usb",
"usba",
"easyprint",
"10minuteprint"
] | Gadgets > Other Gadgets | [
"1301283/images/image_1_compressed.jpg",
"1301283/images/image_2_compressed.jpg"
] | [
"1301283/stls/USB-Cover.stl"
] | CC-BY | https://www.printables.com/model/1301283 | data_0049.tar |
50584 | USB Drive Organizer | <p>I needed a way to keep my thumb drives organized for printing on the Prusa Mini.</p>
| [
"organizer",
"usb"
] | 3D Printers > Accessories | [
"50584/images/image_1_compressed.jpg"
] | [
"50584/stls/usb-holder.stl"
] | CC-BY | https://www.printables.com/model/50584 | data_0049.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.