model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
279870 | Vuse Dock | <p>A simple little dock for my Vuse pen</p> | [
"pen",
"dock",
"ecig",
"cartridges",
"vuse"
] | Household > Other House Equipment | [
"279870/images/image_1_compressed.jpg",
"279870/images/image_2_compressed.jpg",
"279870/images/image_3_compressed.jpg"
] | [
"279870/stls/Vuse Dock.stl"
] | CC-BY | https://www.printables.com/model/279870 | data_0049.tar |
571614 | VW and Skoda Fabia Fuel Gas Tank Cap Cover Rubber | <p>TPU</p> | [
"vw",
"volkswagen",
"seat",
"tpu",
"audi",
"skoda",
"skodafabia"
] | Hobby & Makers > Automotive | [
"571614/images/image_1_compressed.jpg"
] | [
"571614/stls/SkodaFabiaFuelTankRubber.stl"
] | CC-BY | https://www.printables.com/model/571614 | data_0049.tar |
354391 | VW led logo | VW LED Logo | Download free 3D printable STL models | [
"logo",
"led",
"vw",
"pla",
"ledlight"
] | Art & Design > 2D Plates & Logos | [
"354391/images/image_1_compressed.jpg",
"354391/images/image_2_compressed.jpg",
"354391/images/image_3_compressed.jpg",
"354391/images/image_4_compressed.jpg",
"354391/images/image_5_compressed.jpg",
"354391/images/image_6_compressed.jpg"
] | [
"354391/stls/VW schwarz.stl",
"354391/stls/VW weis.stl"
] | CC0 | https://www.printables.com/model/354391 | data_0049.tar |
913394 | VW Seatbelt Plug | [
"seat"
] | Hobby & Makers > Automotive | [
"913394/images/image_1_compressed.jpg",
"913394/images/image_2_compressed.jpg"
] | [
"913394/stls/seat belt plug v1.stl"
] | CC0 | https://www.printables.com/model/913394 | data_0049.tar | |
255297 | VW T5 / T6 Plastic cover cap | <p>Cover cap for a vw t5 or t6 rear fairing </p> | [] | Hobby & Makers > Automotive | [
"255297/images/image_1_compressed.jpg",
"255297/images/image_2_compressed.jpg",
"255297/images/image_3_compressed.jpg",
"255297/images/image_4_compressed.jpg"
] | [
"255297/stls/VW T5 T6 Plastikverkleidung Kappe.stl"
] | CC0 | https://www.printables.com/model/255297 | data_0049.tar |
271782 | VW TSI Keychain | <p>Inspired by the linked remix, but remodeled from scratch using the original as reference only.</p>
Category: Automotive | [
"thingiverse"
] | Hobby & Makers > Automotive | [
"271782/images/image_1_compressed.jpg",
"271782/images/image_2_compressed.jpg"
] | [
"271782/stls/GOLF.stl",
"271782/stls/GTI.stl",
"271782/stls/TSI.stl",
"271782/stls/VW Keychain GOLF.stl",
"271782/stls/VW Keychain GTI.stl",
"271782/stls/VW Keychain Honeycomb.stl",
"271782/stls/VW Keychain TSI.stl"
] | CC-BY | https://www.printables.com/model/271782 | data_0049.tar |
109435 | Vykrajovátko na perníky logo Škoda | [
"christmas",
"skoda",
"gingerbread",
"gingerbreadcutter",
"vanoce",
"pernik"
] | Household > Kitchen | [
"109435/images/image_1_compressed.jpg",
"109435/images/image_2_compressed.jpg"
] | [
"109435/stls/š-1.stl"
] | CC0 | https://www.printables.com/model/109435 | data_0049.tar | |
1072221 | Vánoční svítící dekorace | [] | Household > Bathroom | [
"1072221/images/image_1_compressed.jpg",
"1072221/images/image_2_compressed.jpg"
] | [
"1072221/stls/christmas-tree-1.stl",
"1072221/stls/christmas-tree-2.stl",
"1072221/stls/christmas-tree-3.stl",
"1072221/stls/christmas-tree-4.stl",
"1072221/stls/christmas-tree-5.stl",
"1072221/stls/christmas-tree-6.stl",
"1072221/stls/christmas-tree-7.stl"
] | CC-BY | https://www.printables.com/model/1072221 | data_0049.tar | |
167128 | Věstonická venuše | <p>Základní 2 části (podstavec a soška) byly připraveny pomocí volně šiřitelného programu ZBrushCoreMini, následně exportovány do OBJ souboru. V Tinkercadu pak importovány a vše bylo upraveno pro export do STL souboru pro 3D tisk.</p><p>The basic 2 parts (pedestal and statuette) were prepared with the help of freely di... | [] | Art & Design > Sculptures | [
"167128/images/image_1_compressed.jpg"
] | [
"167128/stls/vest_venuse.stl"
] | CC0 | https://www.printables.com/model/167128 | data_0049.tar |
562324 | Věšák na ručníky pro topný žebřík nebo skleněnou zástěnu sprchy / Towel rack for heating ladder or glass shower screen | <p>Věšák na ručníky a další menší prádlo. Věšák se zahákne za topný žebřík.<br>Dva modely k dispozici - krátký, ten je v první řadě ručníků. <br><br>Pokud na žebříku není dost místa, vytiskněte druhou, delší verzi, a vytvoříte tak druhou řadu věšáků na které můžete umístit další ručníky.</p><p>Pokud máte skleněnou... | [
"vesak",
"koupelna",
"rucniky"
] | Household > Bathroom | [
"562324/images/image_1_compressed.jpg"
] | [
"562324/stls/Vesak na rucniky - sklenena zastena.stl",
"562324/stls/Vesak na rucniky pro topny zebrik - dlouhy.stl",
"562324/stls/Vesak na rucniky pro topny zebrik - kratky.stl"
] | CC-BY | https://www.printables.com/model/562324 | data_0049.tar |
31740 | Věšák na topný žebřík (Rail heater hook hanger) | <h6>Simple and stable hanger hook</h6><ul>
<li>Click fits</li>
<li>Stays tightly on place</li>
<li>2cm rail diameter</li>
</ul><h3>Print instructions</h3><p>PETG is the best. 0.2mm layer height is just fine.</p> | [] | Household > Bathroom | [
"31740/images/image_1_compressed.jpg",
"31740/images/image_2_compressed.jpg",
"31740/images/image_3_compressed.jpg"
] | [
"31740/stls/vesak-na-topny-zebrik.stl"
] | CC-BY | https://www.printables.com/model/31740 | data_0049.tar |
804342 | W1209 Termistor Enclosure | <p>Are you looking for a simple enclosure to hide your PCB? You've found one!</p><p>Assembly is pretty straightforward, here's what you need:</p><ul><li>1x Top cover (print)</li><li>1x Bottom cover (print)</li><li>3x Button (print)</li><li>4x M3x10 bolt (you can optionally use M3x12 or 15)</li><li>Allen key</li></ul><p... | [
"box",
"case",
"enclosure",
"temperature",
"pcb",
"w1209",
"tempcontrol",
"termistor"
] | Hobby & Makers > Electronics | [
"804342/images/image_1_compressed.jpg",
"804342/images/image_2_compressed.jpg",
"804342/images/image_3_compressed.jpg",
"804342/images/image_4_compressed.jpg",
"804342/images/image_5_compressed.jpg"
] | [
"804342/stls/Termostat Box - Bottom.stl",
"804342/stls/Termostat Box - Button.stl",
"804342/stls/Termostat Box - Top.stl"
] | CC-BY | https://www.printables.com/model/804342 | data_0049.tar |
283381 | Wacom Intuos Pro Tablet & Pen Stand |
<p>Made this stand to hold my medium Intuos Pro. They changed the size of the pen holder, so I made this to accommodate the larger one. I also made a version that let me wrap up the cable and fit it into the back slot.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-s... | [
"thingiverse"
] | Art & Design > Other Art & Designs | [
"283381/images/image_1_compressed.jpg",
"283381/images/image_2_compressed.jpg",
"283381/images/image_3_compressed.jpg"
] | [
"283381/stls/intuos_pro_tablet_holder.stl",
"283381/stls/intuos_pro_tablet_holder_-_with_cable_holder.stl",
"283381/stls/large_display_intuos_pro_tablet_holder_-_with_cable_holder_283381.stl"
] | CC-BY | https://www.printables.com/model/283381 | data_0049.tar |
540625 | Wacom Pen Holder | <p>Check out the updated redesigned version here:</p><div data-printables-embed=""><iframe width="640" height="190" src="https://www.printables.com/embed/1772091?size=wide&scale=true" scrolling="no" frameborder="0" class="printables-embed"></iframe></div><p>Printed on Creality K1 in 15 minutes with Eryone matte bla... | [
"holder",
"pen",
"stand",
"tablet",
"wacom",
"stylus"
] | Household > Office | [
"540625/images/image_1_compressed.jpg",
"540625/images/image_2_compressed.jpg"
] | [
"540625/stls/Wacom Pen Holder v14.stl"
] | CC-BY | https://www.printables.com/model/540625 | data_0049.tar |
295460 | Waffle Screw Top Container | <p>I wanted to make my own threads in tinkercad and they worked pretty good. A friend gave me the idea for a waffle container, so I found a waffle and made it into a container(jar?).</p> | [
"container",
"threaded"
] | Hobby & Makers > Organizers | [
"295460/images/image_1_compressed.jpg",
"295460/images/image_2_compressed.jpg"
] | [
"295460/stls/wafflebtm.stl",
"295460/stls/waffletop.stl"
] | CC-BY | https://www.printables.com/model/295460 | data_0049.tar |
895406 | wago 2020 | <p>万可 2020</p> | [
"wago"
] | 3D Printers > Voron Parts & Upgrades | [
"895406/images/image_1_compressed.jpg"
] | [
"895406/stls/wago.stl"
] | CC0 | https://www.printables.com/model/895406 | data_0049.tar |
254158 | WAGO 221 screw mount | [] | Hobby & Makers > Tools | [
"254158/images/image_1_compressed.jpg"
] | [
"254158/stls/WAGO_2_screw_original.stl",
"254158/stls/WAGO_2_screw_short.stl"
] | CC-BY | https://www.printables.com/model/254158 | data_0049.tar | |
1081804 | WAGO 221-412 3x2 thin junctionbox short | <p>Small surface mount box, for hiding cables and wago connectors<br>- just shorter</p><p> </p><p><strong>Please use low-current sensor and signal wires only</strong>. It is <strong>not suitable for mains wiring</strong> due to potential safety risks and regulatory non-compliance.</p><p><strong>Disclaimer:</strong... | [
"wago",
"junctionbox",
"wago221"
] | Hobby & Makers > Electronics | [
"1081804/images/image_1_compressed.jpg",
"1081804/images/image_2_compressed.jpg",
"1081804/images/image_3_compressed.jpg",
"1081804/images/image_4_compressed.jpg",
"1081804/images/image_5_compressed.jpg",
"1081804/images/image_6_compressed.jpg",
"1081804/images/image_7_compressed.jpg"
] | [
"1081804/stls/WAGO-221-3x2-box-short.stl",
"1081804/stls/WAGO-221-3x2-cover-short.stl"
] | CC0 | https://www.printables.com/model/1081804 | data_0049.tar |
507910 | Wago 221-41X Terminal 2x2 2x3 2x5 | <p>Terminal Halter für Wago Klemmen im 2x design für 12V/24V Verkabelung.</p><p>Da ich nur Stehende Exemplare gefunden habe hier mal eine flache, liegende Variante.</p><p>Die Halter sind recht eng in der Toleranz und klemmen bei mir recht gut, ist es bei euch zu eng gebt in Z 1-3% dazu dann sollte es klappen. </p>... | [
"terminalblock",
"wago",
"wago221",
"wagoclamp"
] | Hobby & Makers > Electronics | [
"507910/images/image_1_compressed.jpg"
] | [
"507910/stls/221-412.stl",
"507910/stls/221-413.stl",
"507910/stls/221-415.stl"
] | CC0 | https://www.printables.com/model/507910 | data_0049.tar |
1438777 | Wago 221-420 (10 Connections) DIN Rail Mount | <p>Wago 221-420 (10 Connections) DIN Rail mount.</p><p>Prints without support</p> | [
"wago",
"wago221",
"wagoclamp"
] | Hobby & Makers > Electronics | [
"1438777/images/image_1_compressed.jpg",
"1438777/images/image_2_compressed.jpg"
] | [
"1438777/stls/Wago 221-420.stl"
] | CC-BY | https://www.printables.com/model/1438777 | data_0049.tar |
1109459 | Wago Box 3 x 221 mit seitlicher Kabelführung | <p>Geduckt in XPETG. Auf Erwärmung achten, die Wago Klemmen halten höherer Temperaturen aus als der Werkstoff XPETG. Ich setze es für 24V LED Streifen ein, das ist temperaturtechnisch klein Problem. 16 A Dauerlast würde ich der Box nicht zutrauen wollen (Wago kann's).</p> | [
"wago",
"wago221"
] | Hobby & Makers > Electronics | [
"1109459/images/image_1_compressed.jpg",
"1109459/images/image_2_compressed.jpg",
"1109459/images/image_3_compressed.jpg",
"1109459/images/image_4_compressed.jpg",
"1109459/images/image_5_compressed.jpg",
"1109459/images/image_6_compressed.jpg",
"1109459/images/image_7_compressed.jpg",
"1109459/images... | [
"1109459/stls/Deckel.stl",
"1109459/stls/Gehäuse.stl",
"1109459/stls/Kabeldurchführung.stl"
] | CC0 | https://www.printables.com/model/1109459 | data_0049.tar |
329855 | Wago clips for DIN Rail and Extrusions or screw on | <h3>moved the old to old and added the newly in onshape created ones</h3><p> </p><h3> </h3><h3> </h3><p> </p><p> </p><h3>old stuff</h3><p>--------</p><h3>new_din_wago.stl</h3><p>print this one, add a new_din_voltage-plate.stl after fixing it on the rail</p><p>its a hackedit out of </p><ul>... | [
"extrusion",
"mount",
"creality",
"rail",
"2020extrusion",
"aluminumextrusion",
"din",
"wago",
"dinrail",
"voron",
"wago221",
"wago413"
] | Hobby & Makers > Tools | [
"329855/images/image_1_compressed.jpg",
"329855/images/image_2_compressed.jpg",
"329855/images/image_3_compressed.jpg",
"329855/images/image_4_compressed.jpg"
] | [
"329855/stls/new_din_voltage-plate.stl",
"329855/stls/new_din_wago.stl",
"329855/stls/Wago - 2x5 horizontal.stl",
"329855/stls/Wago - 3x3 horizontal.stl",
"329855/stls/Wago - 3x5 down.stl",
"329855/stls/Wago - 3x5 horizontal.stl",
"329855/stls/Wago_2x_221-415_DINrail_24V.stl",
"329855/stls/Wago_2x_221... | GPL3.0 | https://www.printables.com/model/329855 | data_0049.tar |
1450381 | Wago fingersaver / opener | <p>Print form PETG or stronger materials.<br><br>Recommended slicer settings: 30-40% gyroid infill.</p><p> </p> | [
"wago",
"wago221"
] | Hobby & Makers > Tools | [
"1450381/images/image_1_compressed.jpg",
"1450381/images/image_2_compressed.jpg",
"1450381/images/image_3_compressed.jpg"
] | [
"1450381/stls/wago_fingersaver_without_logo.stl",
"1450381/stls/wago_fingersaver_with_logo.stl"
] | GPL2.0 | https://www.printables.com/model/1450381 | data_0049.tar |
792 | Wagon for tabletop gaming | <p>I made a simple wagon for my D&D game, the goal wasn't to look as realistic as possible, but to convey the idea of a wagon and be usable as a gaming piece, so the tile structure took precedence. I left a hole in the floor at the front where you can connect a harness connected to pack animals to pull it if you li... | [
"dnd",
"wagon",
"dungeonsanddragons"
] | Toys & Games > Board Games | [
"792/images/image_1_compressed.jpg",
"792/images/image_2_compressed.jpg"
] | [
"792/stls/Wagon Covering.stl",
"792/stls/wagon-base.stl",
"792/stls/wheel.stl",
"792/stls/wheelstop.stl"
] | CC0 | https://www.printables.com/model/792 | data_0049.tar |
873534 | Wahl Beard Trimmer Power Button | <p>The membrane switch on my Wahl 9818L stainless steel beard trimmer fell to pieces. This is a simple replacement that's held in using the small countersunk screw that's hidden beneath the original power button.</p><p> </p><p>It's not a perfect fit, but that's ideal as the glow of the blue power/charge LED can be... | [
"beard",
"wahl",
"trimmer",
"9818l"
] | Fashion > Men | [
"873534/images/image_1_compressed.jpg"
] | [
"873534/stls/Wahk Trimmer Button.stl"
] | CC0 | https://www.printables.com/model/873534 | data_0049.tar |
865012 | Wahl Clipper Guard Organizer | [
"organizer",
"clippers"
] | 3D Printers > Accessories | [
"865012/images/image_1_compressed.jpg",
"865012/images/image_2_compressed.jpg",
"865012/images/image_3_compressed.jpg",
"865012/images/image_4_compressed.jpg"
] | [
"865012/stls/Guard Organizer 1.stl",
"865012/stls/Guard Organizer 2.stl"
] | CC0 | https://www.printables.com/model/865012 | data_0049.tar | |
290185 | Wahl Trimmer Gapper | <p>.STEP file available if you want a different gap </p> | [
"wahl",
"trimmer",
"gapper"
] | Household > Bathroom | [
"290185/images/image_1_compressed.jpg"
] | [
"290185/stls/gapper.stl"
] | CC-BY | https://www.printables.com/model/290185 | data_0049.tar |
1040007 | Wahoo Kickr V5 tennis ball rocker foot | <p>Tennis ball rocker foot for increased comfort on your Wahoo Kickr V5. Probably works with other Kickr versions but not tested. Ball diameter is 65mm which should fit most tennis balls. There is more than 2cm of vertical travel space which allows a decent amount of rocking motion.<br><br>I printed it using PLA with 1... | [
"plate",
"ball",
"board",
"tennis",
"rocker",
"wahoo",
"kickr"
] | Sports & Outdoor > Indoor Sports | [
"1040007/images/image_1_compressed.jpg",
"1040007/images/image_2_compressed.jpg",
"1040007/images/image_3_compressed.jpg",
"1040007/images/image_4_compressed.jpg"
] | [
"1040007/stls/Kickr rocker fixing pin - thick.stl",
"1040007/stls/Kickr rocker fixing pin - thin.stl",
"1040007/stls/Kickr tennis ball rocker .stl"
] | CC-BY | https://www.printables.com/model/1040007 | data_0049.tar |
670598 | walksnail goggle x lens cover | <p><a href="https://www.buymeacoffee.com/dgfpv">buymeacoffee.com/dgfpv</a></p><p>this is meant to be printed in tpu.</p><p>The nose on the back should be pushed in the infrared sensor between the lenses.</p> | [
"goggle",
"goggles",
"lenscover",
"walksnail"
] | Hobby & Makers > RC & Robotics | [
"670598/images/image_1_compressed.jpg",
"670598/images/image_2_compressed.jpg",
"670598/images/image_3_compressed.jpg"
] | [
"670598/stls/ws goggle x lens cover.stl"
] | CC0 | https://www.printables.com/model/670598 | data_0049.tar |
415163 | Walkway Terrain | <p>I modeled three different walkways in two different styles using CadQuery. suitable for miniature wargaming.</p><p>---</p><p>For more details, videos, printing tips, and part specs go here:<br><a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://miniforall.com/walkways.html">https:... | [
"parametric",
"terrain",
"gaming",
"miniature",
"tabletop",
"warhammer",
"40k",
"wargaming",
"scenery",
"28mm",
"scifi",
"warhammer40k",
"starwarslegion",
"wargame",
"wargameterrain",
"wargames",
"wh40k",
"wargamesterrain",
"necromunda",
"industrial",
"cadquery",
"deadzone"... | Tabletop Miniatures > Props & Terrains | [
"415163/images/image_1_compressed.jpg",
"415163/images/image_10_compressed.jpg",
"415163/images/image_11_compressed.jpg",
"415163/images/image_12_compressed.jpg",
"415163/images/image_13_compressed.jpg",
"415163/images/image_14_compressed.jpg",
"415163/images/image_15_compressed.jpg",
"415163/images/i... | [
"415163/stls/walkway.stl",
"415163/stls/walkway_bridge.stl",
"415163/stls/walkway_ireg.stl",
"415163/stls/walkway_ireg_bridge.stl",
"415163/stls/walkway_ireg_small.stl",
"415163/stls/walkway_small.stl"
] | CC-BY | https://www.printables.com/model/415163 | data_0049.tar |
1123840 | Wall Art #Seahorse | <h4><strong>Deutsch:</strong></h4><p>Simples Seepferdchen 3D-Wanddekor. </p><figure class="image image-style-align-center"><img class="editor-image-resize" src="https://media.printables.com/media/prints/1123840/rich_content/6fa07cca-d4dc-465c-a253-c95e9be6fd92/line.gif#%7B%22uuid%22%3A%22b872ea62-b64d-46d5-bba3-b8... | [
"wall",
"wallhanger",
"wallart",
"walldecoration",
"walldecor",
"wanddekoration"
] | Art & Design > Wall-mounted | [
"1123840/images/image_1_compressed.jpg"
] | [
"1123840/stls/Seahorse.stl"
] | CC0 | https://www.printables.com/model/1123840 | data_0049.tar |
922259 | Wall art - 2D line art - Dog | <p><strong>A "line art" style interior decoration in the shape of a dog.</strong></p><p> </p><p>On the photos, the models were printed small, but the present models are large.</p><p> </p><ul><li>You can enlarge it to any size you like.</li><li>Given the thickness, filling is not very important</li><li>No supp... | [
"wall",
"dog",
"art",
"wallmount",
"lineart",
"wallart",
"dogs",
"line"
] | Art & Design > Wall-mounted | [
"922259/images/image_1_compressed.jpg"
] | [
"922259/stls/generic_dog_line_art_200X155.stl"
] | CC0 | https://www.printables.com/model/922259 | data_0049.tar |
316726 | Wall Bracket for Filament Storage 20mm | <p>I liked the Design from ItsDeCia but I didn't find a 2 3/4 inch rod so I changed the diameter to 20mm.</p><p>Recommended to print with the following settings:</p><p>50% infill or higher</p><p>3 perimeters or more</p><p>4 base layers and 4 top layers or more</p> | [
"wall",
"filament",
"filamentspoolholder",
"storage",
"bracket",
"filamentholder"
] | Hobby & Makers > Organizers | [
"316726/images/image_1_compressed.jpg"
] | [
"316726/stls/Endstop.stl",
"316726/stls/Wall_Bracket.stl"
] | CC-BY | https://www.printables.com/model/316726 | data_0049.tar |
393247 | Wall chalk holder | <p>Simple chalk holder. Can be removed from its support for easy cleaning.</p><p>Fits 2 packs of normal chalk sticks from Dollarama.</p><p>Use the Mirror option in your slicer to create the left side bracket from the right side model.</p><p>15% infill with PLA was enough in my case since chalk isn't that heavy.</p><p>H... | [] | Household > Other House Equipment | [
"393247/images/image_1_compressed.jpg",
"393247/images/image_2_compressed.jpg"
] | [
"393247/stls/chalk_holder.stl",
"393247/stls/chalk_holder_support.stl"
] | CC-BY | https://www.printables.com/model/393247 | data_0049.tar |
388032 | Wall Control - Milwaukee M12 CP Battery - Dual Mount | Wall Control - Milwaukee M12 CP Battery - Dual Mount | Download free 3D printable STL models | [] | Hobby & Makers > Organizers | [
"388032/images/image_1_compressed.jpg"
] | [
"388032/stls/wallcontrol_m12_cp_battery_dualmount.stl"
] | CC0 | https://www.printables.com/model/388032 | data_0049.tar |
53632 | Wall Control Dual Slot Sharpie holder v2 | <p>Pen/Sharpie holder for WallControl system. </p><p>This uses the dual slot base from here: <a href="https://www.printables.com/model/53629-wall-control-hooks">https://www.printables.com/model/53629-wall-control-hooks</a> and mixed together with Tinkercad which you can tinker with here:<br><a href="https://www.ti... | [
"penholder",
"wallcontrol",
"pegboard",
"thingiverse"
] | Household > Other House Equipment | [
"53632/images/image_1_compressed.jpg"
] | [
"53632/stls/WC-Sharpie-Holder-v2.stl"
] | CC-BY | https://www.printables.com/model/53632 | data_0049.tar |
1083484 | Wall Control Mallet Holder | <p>I made this mallet holder using a centerpiece by Luma specific to their wide array of control designs. You just need a right and left bracket, attach it to this piece and you're good to go. </p> | [
"wallcontrol",
"mallet"
] | Hobby & Makers > Organizers | [
"1083484/images/image_1_compressed.jpg",
"1083484/images/image_2_compressed.jpg"
] | [
"1083484/stls/Rubber Mallet.stl"
] | CC-BY | https://www.printables.com/model/1083484 | data_0049.tar |
53634 | Wall Control Spray Can Holder | <p>Simple remix that changes from standard pegboard to Wall Control dual slot. This uses 2 slots with a strengthened design compared to the normal Wall Control Hook shape.</p><p>I have added a 2 versions to support normal and and slightly larger cans. </p><p>I am using my Wall Control bases from here: </p><p>... | [
"wallcontrol",
"paint",
"thingiverse",
"spraycan",
"hairspray"
] | Household > Other House Equipment | [
"53634/images/image_1_compressed.jpg"
] | [
"53634/stls/WC - Spray Can Vertical_1.stl",
"53634/stls/WC - Spray Can Vertical_2_fixed.stl"
] | CC-BY | https://www.printables.com/model/53634 | data_0049.tar |
53633 | Wall Control Tape Holder | <p>A Wall Control slot version of the Pegboard Tape Holder by @rordaz. This supports the Wall Control slot + peg system. Each side uses dual slots for increased stability. I use my dual slot base from here: <a href="https://www.thingiverse.com/thing:4097266">https://www.thingiverse.com/thing:4097266</a> and combine it ... | [
"wallcontrol",
"pegboard",
"thingiverse",
"tapeholder"
] | Household > Other House Equipment | [
"53633/images/image_1_compressed.jpg"
] | [
"53633/stls/wc_-_tape_holder_left.stl",
"53633/stls/wc_-_tape_holder_right.stl"
] | CC-BY | https://www.printables.com/model/53633 | data_0049.tar |
259170 | Wall drilling waste cup | <p>Stick it to the wall with a strip of painter's tape so the hole-to-be goes between the flat “fingers”. After the drilling is done, tappy-tap-tap the cup with your finger so the remains of the dust still clinging to the edges fall down to the cup. </p> | [
"drilling"
] | Hobby & Makers > Tools | [
"259170/images/image_1_compressed.jpg"
] | [
"259170/stls/Wall drilling waste cup.stl"
] | CC-BY | https://www.printables.com/model/259170 | data_0049.tar |
498475 | wall hanger spool filament shelf rack | <p>adapted for 25mm rod</p><p>(the hole is 26mm)</p> | [] | Household > Other House Equipment | [
"498475/images/image_1_compressed.jpg"
] | [
"498475/stls/spool wall 26mm.stl"
] | CC-BY | https://www.printables.com/model/498475 | data_0049.tar |
431063 | Wall Hanger / Katana Holder / Curtain Rod Hanger | <p>This is a remix of "Katana Holder" by noordvyk. I smoothed-out a lot of the edges and made some minor changes to the model such that I think it'll now print nicer.</p>
<p>While the original model was posted as a Katana specific thing, obviously this could be used as a nice general wall hanger for other things, such ... | [
"thingiverse"
] | Household > Office | [
"431063/images/image_1_compressed.jpg",
"431063/images/image_2_compressed.jpg",
"431063/images/image_3_compressed.jpg",
"431063/images/image_4_compressed.jpg"
] | [
"431063/stls/Katana_HolderKatana2-Mount.stl",
"431063/stls/Katana_Holder_DocDawningRemix-r0.stl"
] | CC-BY | https://www.printables.com/model/431063 | data_0049.tar |
1112073 | Wall Hook for clothes | <p>model made in auntdesk inventor in milimeters</p> | [
"hook",
"wallhook",
"clotheshanger"
] | Household > Office | [
"1112073/images/image_1_compressed.jpg",
"1112073/images/image_2_compressed.jpg"
] | [
"1112073/stls/HOOK 1.stl"
] | CC-BY | https://www.printables.com/model/1112073 | data_0049.tar |
918760 | Wall hook hanger 3M command | <p>Scale it to get the size you want, print it laying on its back (wall side). Have printed in various sizes with various print settings - all turned out great. The hole is more there as a guide/if you want to use it - I have not yet, using 3M command strips as the adhesive for non-damaging hanging. Printing small and ... | [
"wall",
"hook",
"hang"
] | Household > Other House Equipment | [
"918760/images/image_1_compressed.jpg",
"918760/images/image_2_compressed.jpg",
"918760/images/image_3_compressed.jpg"
] | [
"918760/stls/hook.stl"
] | GPL3.0 | https://www.printables.com/model/918760 | data_0049.tar |
150499 | Wall hook with latch | <p>Small hook that is print in place with a latch to increase the strength of the holder. This is based on my other design. I hope its helpful to you. I uploaded the stl and the 3mf. Let me know in the comments if you would like the .step file.</p><p>This design is based on my design below.</p><figure class="media"><oe... | [
"hook",
"hanger",
"wallmount",
"wallhanger",
"wallhooks"
] | Household > Other House Equipment | [
"150499/images/image_1_compressed.jpg",
"150499/images/image_2_compressed.jpg",
"150499/images/image_3_compressed.jpg",
"150499/images/image_4_compressed.jpg",
"150499/images/image_5_compressed.jpg",
"150499/images/image_6_compressed.jpg",
"150499/images/image_7_compressed.jpg"
] | [
"150499/stls/WireSpoolHolder(RemixWallmount).stl"
] | CC-BY | https://www.printables.com/model/150499 | data_0049.tar |
367265 | Wall hook / Wall hanger (Powerstrips) | <p>Print the model on the side with supports for optimal result and strength.</p> | [
"wallhanger"
] | Household > Home Decor | [
"367265/images/image_1_compressed.jpg",
"367265/images/image_2_compressed.jpg",
"367265/images/image_3_compressed.jpg"
] | [
"367265/stls/PowerstripV2.stl"
] | CC-BY | https://www.printables.com/model/367265 | data_0049.tar |
1091276 | Wall Mount - Nintendo Switch Controller Joycon Comfort Grip | <p>Keep your gaming setup organized and your Joycon Comfort Grip within easy reach! This sleek wall mount features a convenient rail system that securely holds your Nintendo Switch Joycon Comfort Grip. Designed for flexibility, it can be easily installed using a 3M Command Strip for a no-drill option or with two screws... | [
"nintendo",
"wallmount",
"joycon",
"controller",
"commandstrip",
"comfortgrip"
] | Gadgets > Video Games | [
"1091276/images/image_1_compressed.jpg",
"1091276/images/image_2_compressed.jpg",
"1091276/images/image_3_compressed.jpg",
"1091276/images/image_4_compressed.jpg",
"1091276/images/image_5_compressed.jpg"
] | [
"1091276/stls/command-strip-rail.stl",
"1091276/stls/joycon-controller-mount.stl"
] | CC-BY | https://www.printables.com/model/1091276 | data_0049.tar |
391128 | Wall Mount Basket | <p>I really liked the original but I did not trust it to hold the weight I intended to put in the basket since it was using command strips. I remixed this to screw into a wall, as well as, added a hex pattern to the sides. I printed this with a .8mm nozzle at .4mm layer heights since there was nothing necessitating any... | [
"shelf",
"organization",
"basket",
"commandstrips"
] | Household > Home Decor | [
"391128/images/image_1_compressed.jpg"
] | [
"391128/stls/Wall Mount Basket.stl"
] | CC0 | https://www.printables.com/model/391128 | data_0049.tar |
245628 | Wall Mount Bracket for Karcher Window Vacuum |
<p>Bracket to wall mount the Karcher Window Vacuum, plus a slot for storing a NZ or Aus power supply plug.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Ender 3</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>... | [
"bracket",
"thingiverse"
] | Household > Office | [
"245628/images/image_1_compressed.jpg"
] | [
"245628/stls/Karcher_Bracket.stl"
] | CC-BY | https://www.printables.com/model/245628 | data_0049.tar |
243523 | Wall mount for 25mm pipe + rosette | [
"wall",
"holder",
"hanger",
"mount",
"pipe",
"clothes"
] | Hobby & Makers > Other Ideas | [
"243523/images/image_1_compressed.jpg",
"243523/images/image_2_compressed.jpg",
"243523/images/image_3_compressed.jpg",
"243523/images/image_4_compressed.jpg"
] | [
"243523/stls/25mmPIPEmount.stl",
"243523/stls/25mmpiperosette.stl",
"243523/stls/25mmpiperosPIN.stl"
] | CC0 | https://www.printables.com/model/243523 | data_0049.tar | |
179666 | Wall mount for filament/spool holder, IKEA PLATSA | <p>Filament holder wall mount for Ikea PLATSA, need the "Filler - Filament Holder"</p><p>Remixed from this wall mount:<br>https://www.thingiverse.com/thing:4397167</p> | [
"spool",
"ikea",
"holder",
"filament",
"spoolholder",
"wallmount",
"filamentholder",
"platsa",
"filler"
] | 3D Printers > Accessories | [
"179666/images/image_1_compressed.jpg"
] | [
"179666/stls/Filament_Holder_2022-05-16.stl"
] | CC-BY | https://www.printables.com/model/179666 | data_0049.tar |
304250 | Wall Mount for Hatch Rest Noise Machine |
<p>Created this wall mount to hold a Hatch Rest (possibly the Rest Plus, but the clock would be covered) baby noise machine. The mount prints in two pieces which get glued together before mounting.</p>
<p>Both pieces can fit on the bed of a medium-sized printer, however I recommend the wall plate be printed with 4 p... | [
"baby",
"hatch",
"thingiverse"
] | Household > Other House Equipment | [
"304250/images/image_1_compressed.jpg",
"304250/images/image_2_compressed.jpg",
"304250/images/image_3_compressed.jpg"
] | [
"304250/stls/Top.stl",
"304250/stls/Wall.stl"
] | CC-BY | https://www.printables.com/model/304250 | data_0049.tar |
524958 | Wall mount for Lego McLaren Formula 1 car | <p>This is a wall mount for the Lego McLaren Formula 1 car. It's twisted to give an artistic pitch, roll and yaw to the car, making it look like it's flying out from the wall. Locks into place onto the underside of the lego car, and mounts to the wall using any <5mm screws.</p><p>Print upside down, with car bracket ... | [
"wallmount",
"lego",
"formula1",
"mclarenf1"
] | Art & Design > Wall-mounted | [
"524958/images/image_1_compressed.jpg",
"524958/images/image_2_compressed.jpg",
"524958/images/image_3_compressed.jpg",
"524958/images/image_4_compressed.jpg"
] | [
"524958/stls/LegoF1CarHolder.stl"
] | CC-BY | https://www.printables.com/model/524958 | data_0049.tar |
473564 | Wall mount for Raspberry Pi 3/4 B+ and Le Potato Case | <p>This is a “snap-in” wall mount to hold a specific Raspberry Pi sized case.</p><p>I am using it with a Libre Le Potato in <a href="https://www.printables.com/model/338952-libre-computer-aml-s905x-cc-le-potato-base-case">https://www.printables.com/model/338952-libre-computer-aml-s905x-cc-le-potato-base-case</a></p><p>... | [] | Gadgets > Computers | [
"473564/images/image_1_compressed.jpg",
"473564/images/image_2_compressed.jpg"
] | [
"473564/stls/LePotato_WallMount.stl"
] | CC-BY | https://www.printables.com/model/473564 | data_0049.tar |
704297 | Wall mountable MMU3 PTFE tube holder | [
"mmu3"
] | 3D Printers > Prusa Parts & Upgrades | [
"704297/images/image_1_compressed.jpg",
"704297/images/image_2_compressed.jpg"
] | [
"704297/stls/PTFE-clip-R3.stl"
] | GPL2.0 | https://www.printables.com/model/704297 | data_0049.tar | |
357440 | Wall mounted brackets for the MCRN ships | <p>I did not intent originaly to publish those, but I was asked to do so.<br>Here we have a wall mounted brackets for the MCRN ships:<br> </p><p><a href="https://www.printables.com/model/289226-morrigan-class-from-the-expanse">Morrigan Class</a><br><br><a href="https://www.printables.com/model/324572-corvette-clas... | [
"wall",
"expanse",
"brackets",
"mcrn"
] | Hobby & Makers > Tools | [
"357440/images/image_1_compressed.jpg",
"357440/images/image_2_compressed.jpg"
] | [
"357440/stls/xxx_-_wall_mount_corvette_1.stl",
"357440/stls/xxx_-_wall_mount_corvette_2.stl",
"357440/stls/xxx_-_wall_mount_morrigan_1.stl",
"357440/stls/xxx_-_wall_mount_morrigan_2.stl",
"357440/stls/xxx_-_wall_mount_orion_1.stl",
"357440/stls/xxx_-_wall_mount_orion_2.stl"
] | CC-BY | https://www.printables.com/model/357440 | data_0049.tar |
346083 | Wall Mounted Hanging Plant Hook |
<p>A wall mounted hook for hanging plants! Topology optimized for minimal material usage. The object itself is approximately 210 x 210 mm which technically can fit inside a 220 x 220 build plate, however my printer is a bit janky and I kept running into issues. 90% scale seems to fit better and should still be able ... | [
"thingiverse"
] | Household > Other House Equipment | [
"346083/images/image_1_compressed.jpg",
"346083/images/image_2_compressed.jpg",
"346083/images/image_3_compressed.jpg",
"346083/images/image_4_compressed.jpg",
"346083/images/image_5_compressed.jpg",
"346083/images/image_6_compressed.jpg"
] | [
"346083/stls/Wall_Plant_Hook_V1.stl"
] | CC-BY | https://www.printables.com/model/346083 | data_0049.tar |
573952 | Wall mounted hat rack | <p>Double sided command strip it to the wall and you are good to go. All hats with straps should be able to stack right on top of each other for maximum space saving.</p> | [
"organizer",
"wall",
"hanger",
"hat",
"mounted"
] | Hobby & Makers > Organizers | [
"573952/images/image_1_compressed.jpg"
] | [
"573952/stls/hat hanger.stl"
] | CC0 | https://www.printables.com/model/573952 | data_0049.tar |
104057 | Wall mounted headphones holder |
<p>Just a simple wall mounted headphones holder. Should work for any headphones you've got, fits my JBL Live headset very well.</p>
<p>The whole thing sticks about 2.5" out from the wall and the part that actually holds the headphones is an inch wide.</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>... | [
"headphone",
"wallmount",
"headphones",
"wallmounted",
"headphoneholder",
"thingiverse",
"headphonehanger",
"headphoneshook"
] | Household > Office | [
"104057/images/image_1_compressed.jpg",
"104057/images/image_2_compressed.jpg",
"104057/images/image_3_compressed.jpg"
] | [
"104057/stls/Headphones_holder.stl"
] | CC-BY | https://www.printables.com/model/104057 | data_0049.tar |
70349 | Wall mounted spool holder: MMU2S | <p>I wanted to wall mount my filament for my MMU2S. I found the design by darkfire which is great, along with the remix providing M10 connectors. </p><p>Darkfire's design is perfect except I wanted to use less material and hopefully print them more quickly. This is my remix combining both. I als... | [
"spoolholder",
"mmu2s",
"wallmounted"
] | 3D Printers > Prusa Parts & Upgrades | [
"70349/images/image_1_compressed.jpg"
] | [
"70349/stls/Bearing stopper.stl",
"70349/stls/spool-holder-connectortube_m10.stl",
"70349/stls/spool-holder-side_simple.stl"
] | CC-BY | https://www.printables.com/model/70349 | data_0049.tar |
544908 | Wall mounted trash can / container | <p>A simple trash can/container I designed to mount under my desk.</p><p>Designed in Onshape: https://cad.onshape.com/documents/c50fee3deceb6fb92f6d9270/w/d928824ec5a8039f2a05e457/e/e55681efde2c33b2d4adb462</p> | [] | Household > Office | [
"544908/images/image_1_compressed.jpg"
] | [
"544908/stls/Trashcan.stl",
"544908/stls/trashcan.stl"
] | GPL2.0 | https://www.printables.com/model/544908 | data_0049.tar |
490917 | Wall Necklace and Ring Holder | <p>This can hold a couple of your necklaces plus some rings or hair ties on the top. I used some scotch double-sided mounting strips to keep it up and it is really working and holds a good amount of weight if you have heftier necklaces. Command strips would probably work too and are more renter friendly.</p> | [
"ringstand",
"necklaceholder"
] | Household > Bedroom | [
"490917/images/image_1_compressed.jpg",
"490917/images/image_2_compressed.jpg"
] | [
"490917/stls/necklace v1.stl"
] | CC0 | https://www.printables.com/model/490917 | data_0049.tar |
875541 | WALL OR CEILING HOOK / TIE DOWN | <p>A wall or ceiling hook/tie down for hanging lamps, tying stuff to, or whatever. Designed to use with TESA Powerstrips Large double sided tape.</p> | [
"wall",
"hanger",
"tie",
"ceilingmount",
"ceiling",
"ceilinghook",
"down"
] | Household > Other House Equipment | [
"875541/images/image_1_compressed.jpg"
] | [
"875541/stls/wall or ceiling hook.stl"
] | CC-BY | https://www.printables.com/model/875541 | data_0049.tar |
402725 | Wall Phone Holder | <p>no supports needed, easy to print</p> | [
"wall",
"holder",
"phone",
"smartphoneholder"
] | Hobby & Makers > Organizers | [
"402725/images/image_1_compressed.jpg",
"402725/images/image_2_compressed.jpg"
] | [
"402725/stls/Phone Holder v1.stl"
] | CC-BY | https://www.printables.com/model/402725 | data_0049.tar |
832942 | Wall Planter | <p>How did I designed this model ? :<br> </p><figure class="media"><oembed url="https://youtu.be/Mk2O0ZPJP6U"></oembed></figure><p><br>A wall planter is a decorative and functional container designed to hold plants and flowers while being mounted on a wall or vertical surface. These planters come in a variety of s... | [
"gardening",
"planters",
"succulents",
"wallplanter",
"herbs",
"homeimprovement",
"indoorplants",
"plantdecor",
"verticalgardening",
"outdoordecor",
"balconygarden",
"gardenaccessories",
"floraldecor",
"urbanliving",
"smallspaces"
] | Art & Design > Wall-mounted | [
"832942/images/image_1_compressed.jpg"
] | [
"832942/stls/Wall Planter with holes.stl",
"832942/stls/Wall Planter.stl"
] | CC0 | https://www.printables.com/model/832942 | data_0049.tar |
453142 | Wall spool holder | Filament spool holder which can be mounted on a wall | Download free 3D printable STL models | [] | 3D Printers > Accessories | [
"453142/images/image_1_compressed.jpg",
"453142/images/image_2_compressed.jpg"
] | [
"453142/stls/filamet holder v1.stl"
] | CC0 | https://www.printables.com/model/453142 | data_0049.tar |
194262 | Wall-Mount Tablet/Phone Holder |
<p>Paying homage to a nice mounting system I found while hunting on <a href="https://www.amazon.com?linkCode=ll2&tag=thingiverse09-20&linkId=e4759bff1fa9a55a0f897d801ce2d765&language=en_US&ref_=as_li_ss_tl">Amazon</a>. The Koala Mount 2.0 (<a href="http://a.co/d/7R21tyY">http://a.co/d/7R21tyY</a>) is... | [
"thingiverse"
] | Household > Office | [
"194262/images/image_1_compressed.jpg",
"194262/images/image_2_compressed.jpg"
] | [
"194262/stls/device_mount_2.stl"
] | CC-BY | https://www.printables.com/model/194262 | data_0049.tar |
32593 | Wall-Mounted DryBox w/ Sensor | <p>Modified dry box to replace slotted exit hole with a threaded connection for a PC4-M10 quick fitting connector.</p>
<p>Connector designed for can be found here:<br/>
<a href="https://www.amazon.com/gp/product/B01KHN1HWY/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1">https://www.amazon.com/gp/product/B01KHN1HW... | [
"spool",
"box",
"wall",
"holder",
"filament",
"material",
"mount",
"multi",
"2",
"storage",
"mmu2s",
"sensor",
"humidity",
"ptfe",
"dry",
"mounted",
"connector",
"s",
"pc4",
"unit",
"m10",
"humiditysensor",
"fitting"
] | 3D Printers > Other Printer Parts & Upgrades | [
"32593/images/image_1_compressed.jpg",
"32593/images/image_2_compressed.jpg",
"32593/images/image_3_compressed.jpg",
"32593/images/image_4_compressed.jpg",
"32593/images/image_5_compressed.jpg"
] | [
"32593/stls/wallmounted_drybox_bottom_w_pc4-m10.stl",
"32593/stls/wallmounted_drybox_knob.stl",
"32593/stls/wallmounted_drybox_top_w_sensor.stl"
] | CC-BY | https://www.printables.com/model/32593 | data_0049.tar |
460927 | Wall-mounted Pool Cue Holder | <p>Designed to hold 4 cues (of reasonably similar length :) ). Each half of the mount attaches with two #6 fasteners (holes are pretty generously toleranced, so should be easily cleaned out up to a #8... I think). I have printed both sides in both resin and filament and both turned out just dandy. Because I did not alt... | [
"table",
"decoration",
"games",
"fusion360",
"pool",
"generativedesign",
"decorative",
"generative",
"cue",
"billiards"
] | Art & Design > Wall-mounted | [
"460927/images/image_1_compressed.jpg",
"460927/images/image_2_compressed.jpg",
"460927/images/image_3_compressed.jpg",
"460927/images/image_4_compressed.jpg",
"460927/images/image_5_compressed.jpg",
"460927/images/image_6_compressed.jpg"
] | [
"460927/stls/GD_Mount_Lower_rev2.stl",
"460927/stls/GD_Mount_Upper_Rev2.stl"
] | GPL3.0 | https://www.printables.com/model/460927 | data_0049.tar |
430403 | Wallart love moon couple | <p>Una bella wallart di una coppia romantica.</p> | [
"moon",
"love",
"wallart",
"couple",
"2dwallart",
"3dwallart",
"lovewallart"
] | Art & Design > 2D Plates & Logos | [
"430403/images/image_1_compressed.jpg"
] | [
"430403/stls/tinker.stl"
] | CC-BY | https://www.printables.com/model/430403 | data_0049.tar |
125301 | Wallcharger cable hook | <p>Printed in PETG, no supports needed</p> | [] | Hobby & Makers > Organizers | [
"125301/images/image_1_compressed.jpg"
] | [
"125301/stls/cable-hook.stl"
] | CC-BY | https://www.printables.com/model/125301 | data_0049.tar |
967042 | Wallet & Key Tray | <p>I use this wallet tray for my badge, wallet, pen, airpods, etc.</p><p>Make sure your printer sheet is clean and level. </p><p>Happy Printing</p> | [
"wallet",
"tray",
"airpods",
"walletcase",
"walletorganizer",
"wallettray"
] | 3D Printers > Accessories | [
"967042/images/image_1_compressed.jpg",
"967042/images/image_2_compressed.jpg"
] | [
"967042/stls/Key Wallet Tray.stl"
] | CC-BY | https://www.printables.com/model/967042 | data_0049.tar |
900764 | Wallet Sketch Stencil | <p>I wanted a small stencil that I could fit in my wallet and use for small sketches. This stencil is the same size as a credit card while being able to fit a bunch of different shapes.</p><p>Included on the design are:</p><ul><li>1 inch circle</li><li>half inch circle</li><li>half inch square</li><li>half inch hexagon... | [
"engineering",
"stencil",
"sketching"
] | Art & Design > 2D Plates & Logos | [
"900764/images/image_1_compressed.jpg",
"900764/images/image_2_compressed.jpg",
"900764/images/image_3_compressed.jpg",
"900764/images/image_4_compressed.jpg",
"900764/images/image_5_compressed.jpg",
"900764/images/image_6_compressed.jpg",
"900764/images/image_7_compressed.jpg",
"900764/images/image_8... | [
"900764/stls/sketch_stencil.stl",
"900764/stls/sketch_stencil_(no spring or gears).stl"
] | CC-BY | https://www.printables.com/model/900764 | data_0049.tar |
56667 | Wallholder AA and AAA Batteries | <p>Wallholder for 16 batteries.<br>AA and AAA versions included.</p><p>Uses 2pcs 3x15mm (or longer) woodscrews.</p><p>Holders in pictures are printed with 0.6 nozzle, 0.3 layer height, 2 walls of 0.8 extrusion width with 3 bottom layers and 4 top layers with 10% rectalinear infill.</p><h3>Print instructions</h3><p>Prin... | [
"aa",
"aaa",
"wallmounted",
"batteryholder"
] | Hobby & Makers > Organizers | [
"56667/images/image_1_compressed.jpg",
"56667/images/image_2_compressed.jpg",
"56667/images/image_3_compressed.jpg",
"56667/images/image_4_compressed.jpg"
] | [
"56667/stls/wall_x16_aa.stl",
"56667/stls/wall_x16_aaa.stl"
] | CC0 | https://www.printables.com/model/56667 | data_0049.tar |
593195 | Walmart Hart 20V Stick Vacuum Replacement Wheel | <p>Plastic snap clips on the wheels of the Hart 20V stick vacuum break very easily. I couldn't find any replacement part numbers online, so I made an exact copy using SolidWorks. Attempted to beef-up the snap mechanism for a hardier wheel. Highly recommend printing the rim at 45<strong>°</strong> relative to the bed to... | [
"tool",
"wheel",
"replacement",
"vacuum",
"cordless",
"hart",
"walmart"
] | Household > Other House Equipment | [
"593195/images/image_1_compressed.jpg",
"593195/images/image_2_compressed.jpg",
"593195/images/image_3_compressed.jpg",
"593195/images/image_4_compressed.jpg"
] | [
"593195/stls/Hart 20V Vacuum Wheel Tread.stl",
"593195/stls/Hart 20V Vacuum Wheel.stl"
] | CC-BY | https://www.printables.com/model/593195 | data_0049.tar |
1069490 | Wandhalter für (Dyson) Kinderstaubsauger und Zubehör | <p>Einfach zu bedienender Wandhalter für den (Dyson) Kinderstaubsauger und Zubehör.<br>Ist auch von den Kleineren einfach zu benutzen.</p> | [
"dyson",
"wandhalter",
"spielzeug",
"kinderstaubsauger"
] | Toys & Games > Other Toys & Games | [
"1069490/images/image_1_compressed.jpg",
"1069490/images/image_2_compressed.jpg",
"1069490/images/image_3_compressed.jpg"
] | [
"1069490/stls/Düsenhalter.stl",
"1069490/stls/Wandhalter.stl"
] | CC-BY | https://www.printables.com/model/1069490 | data_0049.tar |
864001 | Wandhalter für Bosch eBike Akku Powerpack 500 | wall bracket for Bosch ebike battery "PowerPack 500" | <p>Ladestecker passt exakt in den Halter, sodass der Akku beim einsetzen kontaktiert wird. | Charging plug fits exactly into the bracket so that the battery is contacted when inserted.<br><br>In addition I used <a href="https://www.printables.com/model/640457-wall-holster-for-bosch-ebike-battery-charger-36-4">THIS</a> ... | [
"bracket",
"ebike",
"ebikebosch",
"urbanarrow",
"powerpack500"
] | 3D Printers > Accessories | [
"864001/images/image_1_compressed.jpg",
"864001/images/image_2_compressed.jpg",
"864001/images/image_3_compressed.jpg",
"864001/images/image_4_compressed.jpg",
"864001/images/image_5_compressed.jpg",
"864001/images/image_6_compressed.jpg",
"864001/images/image_7_compressed.jpg",
"864001/images/image_8... | [
"864001/stls/Akku-Halter_v1.1.stl"
] | CC-BY | https://www.printables.com/model/864001 | data_0049.tar |
543178 | Wandhalterung SwitchBot Outdoor Meter / Wall mount SwitchBot Outdoor Meter | <p>Wandhalterung kann mit 2x 3mm Senkkopfschrauben einfach befestigt werden.</p><p>Ich habe beim Druck organic Support verwendet. Geht aber auch ohne, dann sind die Bögen auf der Unterseite bisschen unsauber, aber nicht schlimm.</p><p>Wall bracket can be easily attached with 2x 3mm countersunk screws.</p><p>I used orga... | [] | Household > Outdoor & Garden | [
"543178/images/image_1_compressed.jpg",
"543178/images/image_2_compressed.jpg",
"543178/images/image_3_compressed.jpg",
"543178/images/image_4_compressed.jpg",
"543178/images/image_5_compressed.jpg",
"543178/images/image_6_compressed.jpg"
] | [
"543178/stls/w1g-Fillet004.stl"
] | CC-BY | https://www.printables.com/model/543178 | data_0049.tar |
265279 | Wankel Fidget 608 bearing magnets remix | <p>I loved frez_knee's remix of mobious' original wankel fidget. I like the fact that it used a 608 bearing and had a way of captivating the mechanism so it all held in place. My first print of this is one of my favourite fidgets so far.</p><p>On using it though, I got to thinking about simulating compression/expansion... | [
"motor",
"fidget",
"engine",
"bearing",
"rotary",
"mazda",
"compression",
"wankel"
] | Toys & Games > Other Toys & Games | [
"265279/images/image_1_compressed.jpg",
"265279/images/image_2_compressed.jpg",
"265279/images/image_3_compressed.jpg"
] | [
"265279/stls/Wankel Fidget 608 Bearing - bearing-retainer M3 countersunk bolt.stl",
"265279/stls/Wankel Fidget 608 Bearing - bearing-retainer M3 screw self-tap.stl",
"265279/stls/Wankel Fidget 608 Bearing - eccentric-shaft-v2.stl",
"265279/stls/Wankel Fidget 608 Bearing - Rotor housing w magnets.stl",
"2652... | CC-BY | https://www.printables.com/model/265279 | data_0049.tar |
151994 | Wargame Building Terrain - Stand Alone Building - Group Three! | <p><strong>Wargame Building Terrain - Stand Alone Building - Group Three!</strong></p><ul><li>Complex stand alone building with floor!</li><li>Complex stand alone building with floor and slide in door!</li><li>Complex stand alone building with No floor!</li></ul><p><i>The empires of the future won't be lived in caves. ... | [
"terrain",
"warhammer",
"40k",
"28mm",
"diorama",
"train",
"sciencefiction",
"modeltrain",
"40kwarhammer",
"warhammer40k",
"warhammer40000",
"warhammerfantasy",
"scatterterrain",
"tabletopterrain",
"wargame",
"wargameterrain",
"wargames",
"wargamingterrain",
"wargamemodel",
"wa... | Tabletop Miniatures > Props & Terrains | [
"151994/images/image_1_compressed.jpg",
"151994/images/image_10_compressed.jpg",
"151994/images/image_11_compressed.jpg",
"151994/images/image_12_compressed.jpg",
"151994/images/image_13_compressed.jpg",
"151994/images/image_14_compressed.jpg",
"151994/images/image_15_compressed.jpg",
"151994/images/i... | [
"151994/stls/220014-LG-BUILDING-THREE-V1.stl",
"151994/stls/220016-LG-BUILDING-THREE-V2.stl",
"151994/stls/220028-LG-BLD-DOOR-THREE-V3.stl",
"151994/stls/220040-LG-ROOF-PLAIN-V3.stl",
"151994/stls/220041-LG-ROOF-HATCH-V3.stl"
] | CC-BY | https://www.printables.com/model/151994 | data_0049.tar |
809520 | Washers M3-M8 DIN 125 kit card | [
"card",
"m4",
"m6",
"m3",
"m5",
"washer",
"washers",
"m8"
] | Hobby & Makers > Mechanical Parts | [
"809520/images/image_1_compressed.jpg"
] | [
"809520/stls/Washers M3-M8 norm DIN 125 kit card.stl"
] | CC-BY | https://www.printables.com/model/809520 | data_0049.tar | |
1202820 | Washi Tape Tree | <p>Organise and display your washi tapes in a tree!</p><p>Built out of multiple sections and easily scalable - from 2 sections to as many as you would like.</p><p>Use M3 10mm (or 8mm) Button Screws e.g.:</p><ul><li>Accu Product Code (APC): SSB-M3-10-A2</li><li>Accu Product Code (APC): SSB-M3-8-A2</li></ul><p>No nuts re... | [
"washi",
"washitape",
"washitapeorganizer",
"washitapeholder"
] | Hobby & Makers > Organizers | [
"1202820/images/image_1_compressed.jpg",
"1202820/images/image_2_compressed.jpg",
"1202820/images/image_3_compressed.jpg",
"1202820/images/image_4_compressed.jpg"
] | [
"1202820/stls/Washi Tape Holder - Connector & Handle.stl",
"1202820/stls/Washi Tape Holder - End Section.stl",
"1202820/stls/Washi Tape Holder - Mid Section.stl"
] | CC-BY | https://www.printables.com/model/1202820 | data_0049.tar |
1144962 | Watch Maker Trays | <p>hi, I made my own version of Watch Maker Trays.<br>They are specially designed for mechanical automatic watches like the ETA 2824-2 but can be used universally.<br>I have adapted the individual areas to the assemblies. For example, the balance wheel is individually separate from the escapement group because of the s... | [
"tray",
"trays",
"watchmaker",
"watchmaking"
] | Hobby & Makers > Organizers | [
"1144962/images/image_1_compressed.jpg",
"1144962/images/image_2_compressed.jpg",
"1144962/images/image_3_compressed.jpg",
"1144962/images/image_4_compressed.jpg",
"1144962/images/image_5_compressed.jpg",
"1144962/images/image_6_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/1144962 | data_0049.tar |
176796 | Watch Makers Tool Caddy | <figure class="image"><img src="https://media.printables.com/media/prints/176796/rich_content/6a36f511-af0f-470a-ab12-970d15a3a44d/toolcaddy.png#%7B%22uuid%22%3A%22690ad072-65e1-4367-b0df-6ae4ff2cc171%22%2C%22w%22%3A870%2C%22h%22%3A768%7D"></figure><p> </p><p> </p> | [] | Hobby & Makers > Tools | [
"176796/images/image_1_compressed.jpg",
"176796/images/image_2_compressed.jpg"
] | [
"176796/stls/Base.stl",
"176796/stls/ToolHolder.stl",
"176796/stls/TpuSleeve.stl"
] | CC-BY | https://www.printables.com/model/176796 | data_0049.tar |
247813 | watch opener | <p>this is just a note for future me: counterclockwise to open the watch </p><p> </p><p>you can easily adjust the model using the params inside the f3d</p> | [
"opener"
] | Hobby & Makers > Tools | [
"247813/images/image_1_compressed.jpg",
"247813/images/image_2_compressed.jpg"
] | [
"247813/stls/watch_opener v2.stl"
] | CC0 | https://www.printables.com/model/247813 | data_0049.tar |
306969 | Watch your head Sign | <p>suitable for color changing</p> | [
"sign",
"head"
] | Art & Design > 2D Plates & Logos | [
"306969/images/image_1_compressed.jpg"
] | [
"306969/stls/Watch Your Head Sign.stl"
] | CC0 | https://www.printables.com/model/306969 | data_0049.tar |
515077 | Water balloon nozzle | <p>For maximum funabillity get a water flow controller on the hose. It just make it so much easier to use. I tested this setup at a birthday party and even the four year old managed to use it fine. </p><p>@noelito have made a balloon tying tool! Check it out here.</p><p><a href="https://www.printables.com/model/67... | [
"water",
"nozzle",
"hose",
"balloon",
"quickconnect",
"waterballoon"
] | Household > Outdoor & Garden | [
"515077/images/image_1_compressed.jpg",
"515077/images/image_10_compressed.jpg",
"515077/images/image_11_compressed.jpg",
"515077/images/image_2_compressed.jpg",
"515077/images/image_3_compressed.jpg",
"515077/images/image_4_compressed.jpg",
"515077/images/image_5_compressed.jpg",
"515077/images/image... | [
"515077/stls/Water balloon nozzle 21mm.stl",
"515077/stls/Water balloon nozzle 26,5mm.stl",
"515077/stls/Water balloon nozzle 33mm.stl",
"515077/stls/water balloon nozzle quick connect.stl"
] | CC0 | https://www.printables.com/model/515077 | data_0049.tar |
507979 | Water Bottle Dryer (Sodastream Glass Bottle Remix) | <p>This is a slight remix of ShaneF12's file to specificly fit Sodastream Glass Bottles, who have a smaller hole but still require a strong base since they are heavier and have a bigger bottom.</p>
<p>The new tip is 2,4 mm wide.</p>
<p>I recommend printing this with at least 3 walls and 20% infill to give it enough str... | [
"thingiverse"
] | Household > Kitchen | [
"507979/images/image_1_compressed.jpg",
"507979/images/image_2_compressed.jpg"
] | [
"507979/stls/Smol_Water_Bottle_Dryer.stl"
] | CC-BY | https://www.printables.com/model/507979 | data_0049.tar |
1128078 | Water Bottle Handle Carrier Lifter | <p>Water Bottle Handle Carrier Lifter
Print without support
Infill more than 20% is better
Use PETG material</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3</p></div>**Rafts:**
<p>No</p>
<p class="detail-se... | [
"thingiverse",
"bottleholder",
"lifter",
"waterbottleholder",
"bottlecarrier",
"waterbottlehandle",
"waterbottlecarrier",
"bottlecarrierlifter",
"bottlelifter"
] | Household > Kitchen | [
"1128078/images/image_1_compressed.jpg",
"1128078/images/image_2_compressed.jpg",
"1128078/images/image_3_compressed.jpg",
"1128078/images/image_4_compressed.jpg",
"1128078/images/image_5_compressed.jpg",
"1128078/images/image_6_compressed.jpg",
"1128078/images/image_7_compressed.jpg",
"1128078/images... | [
"1128078/stls/water_bottle_holder.stl"
] | CC-BY | https://www.printables.com/model/1128078 | data_0049.tar |
109960 | Water meter - AI-on-the-edge |
<p>This mount is designed to attach an ESP32-CAM microcontroller to a water meter. Together with the open source firmware "AI-on-the-edge" (<a href="https://github.com/jomjol/AI-on-the-edge-device">https://github.com/jomjol/AI-on-the-edge-device</a>) of the user Jomjol it can read the water meter automatically and sen... | [
"thingiverse"
] | Hobby & Makers > Electronics | [
"109960/images/image_1_compressed.jpg",
"109960/images/image_2_compressed.jpg",
"109960/images/image_3_compressed.jpg",
"109960/images/image_4_compressed.jpg"
] | [
"109960/stls/2021-03-21_Wasserzaehler.stl",
"109960/stls/2021-03-21_Wasserzaehler_cap_RevA.stl",
"109960/stls/2021-03-21_Wasserzaehler_main-cap_RevA.stl"
] | CC-BY | https://www.printables.com/model/109960 | data_0049.tar |
57609 | Water meter inductive sensor bracket | <p>This part fits on water meters with two screw pillars on the glass. One side has a slotted hole so the offset of the induction sensor to the pointer can be adjusted.</p><p>For my water meter (Kiwa sensus) the center to center distance of the screw pillars is 34,9mm and the diameter 5mm.</p><p>If you have different d... | [
"home",
"assistant",
"sensus",
"kiwa"
] | Household > Other House Equipment | [
"57609/images/image_1_compressed.jpg",
"57609/images/image_2_compressed.jpg",
"57609/images/image_3_compressed.jpg",
"57609/images/image_4_compressed.jpg",
"57609/images/image_5_compressed.jpg",
"57609/images/image_6_compressed.jpg",
"57609/images/image_7_compressed.jpg"
] | [
"57609/stls/Watermeter sensor bracket M18 v5.stl"
] | CC0 | https://www.printables.com/model/57609 | data_0049.tar |
28243 | Watercolor Half Pan | <p>A simple half pan for watercolor paint holders</p>
<p>Outer dimensions are:<br/>
19.0mm long<br/>
15.5mm wide<br/>
9.5mm tall</p>
| [] | Hobby & Makers > Organizers | [
"28243/images/image_1_compressed.jpg"
] | [
"28243/stls/watercolor-half-pan.stl"
] | CC-BY | https://www.printables.com/model/28243 | data_0049.tar |
1301890 | Watering difuser, 22 mm | <p>Watering attachment for a 22 mm watering jar<br>PLA printed in my old Makerbot Replicator 2, layer: 0.2 mm, 17% infill, no supports</p> | [] | Household > Outdoor & Garden | [
"1301890/images/image_1_compressed.jpg"
] | [
"1301890/stls/sprinler.stl"
] | CC0 | https://www.printables.com/model/1301890 | data_0049.tar |
394692 | Wave Vase | <p>This is a Wave Vase inspired by the well known Wave Vase from Zampik (<a href="https://www.thingiverse.com/thing:390713">http://www.thingiverse.com/thing:390713</a>).</p><p>I wanted to design one myself, and i did with the help of Fusion 360 from Autodesk (great software).</p><p>I designed this in 2015 and am import... | [] | Household > Home Decor | [
"394692/images/image_1_compressed.jpg",
"394692/images/image_2_compressed.jpg"
] | [
"394692/stls/waveVase_1.stl",
"394692/stls/waveVase_200mm (1).stl"
] | CC-BY | https://www.printables.com/model/394692 | data_0049.tar |
457963 | Waverrior - 3D Shoes | <p> </p><p><img class="image_resized" style="width:42.25%;" src="https://media.printables.com/media/prints/457963/rich_content/febdfcb3-450c-4081-b8c6-8b403d7975c6/mens_shoe_size_guide.jpg#%7B%22uuid%22%3A%227e702f60-33f3-4445-b48f-d8d109d0f9a3%22%2C%22w%22%3A1271%2C%22h%22%3A1678%7D">Waverrior - 3D Shoes by  ... | [
"3d",
"printed",
"shoe",
"shoes",
"3dprinted",
"boots",
"3dshoes",
"3dprintedshoes",
"3dboots"
] | Fashion > Other Fashion Accessories | [
"457963/images/image_1_compressed.jpg",
"457963/images/image_10_compressed.jpg",
"457963/images/image_11_compressed.jpg",
"457963/images/image_12_compressed.jpg",
"457963/images/image_13_compressed.jpg",
"457963/images/image_14_compressed.jpg",
"457963/images/image_15_compressed.jpg",
"457963/images/i... | [
"457963/stls/EU_39.stl",
"457963/stls/EU_40.stl",
"457963/stls/EU_41.stl",
"457963/stls/EU_42.stl",
"457963/stls/EU_43.stl",
"457963/stls/EU_44.stl"
] | CC-BY | https://www.printables.com/model/457963 | data_0049.tar |
152185 | Waveshare 5" LCD Cover | <p>A simple LCD Cover that you can use to cover a Waveshare 5" LCD screen when installed in the Prusa-Box Modular Control Panel.</p><p> </p> | [
"display",
"cover",
"lcd",
"lcdcover",
"waveshare",
"5inch",
"prusabox",
"displaycover"
] | 3D Printers > Accessories | [
"152185/images/image_1_compressed.jpg",
"152185/images/image_2_compressed.jpg"
] | [
"152185/stls/Waveshare_5_LCD_Cover.stl"
] | CC-BY | https://www.printables.com/model/152185 | data_0049.tar |
260966 | Wavy Koozie | <p>Printed in TPU. Printed at .24mm with a .5mm nozzle @ 40mm/s, fan speed 33%. I used 15% infill, 4 bottom layers, 5 top layers including 2 concentric surface skin layers. Increase size by 1% so the can doesn't get stuck.</p> | [] | Household > Kitchen | [
"260966/images/image_1_compressed.jpg"
] | [
"260966/stls/wavykoozie.stl"
] | CC0 | https://www.printables.com/model/260966 | data_0049.tar |
775180 | Wavy Skirt add on | [
"figure",
"lego",
"wavy",
"skirt",
"grandma"
] | Tabletop Miniatures > Characters & Monsters | [
"775180/images/image_1_compressed.jpg",
"775180/images/image_2_compressed.jpg"
] | [
"775180/stls/Wavy Dress.stl"
] | CC-BY | https://www.printables.com/model/775180 | data_0049.tar | |
214970 | Wavy Soap Dish | <p>Minimalistic soap dish.</p><p>Print on the side for best result.</p><p> </p><p>Give me a follow if you like my models :3 as it would help me out <3</p><p>I got a discord where I post and discuss my work here</p><p><a href="https://discord.gg/AT4pBp8fA6">Discord Link</a></p><p>If you feel extra supportive the... | [
"bathroom",
"soap",
"dish",
"soapholder",
"soapdish"
] | Household > Bathroom | [
"214970/images/image_1_compressed.jpg",
"214970/images/image_2_compressed.jpg"
] | [
"214970/stls/Soapdish.stl"
] | CC-BY | https://www.printables.com/model/214970 | data_0049.tar |
127957 | WC penseur | <p>Juste une déco pour la porte des toilettes.</p> | [
"wc"
] | Art & Design > 2D Plates & Logos | [
"127957/images/image_1_compressed.jpg"
] | [
"127957/stls/WC_penseur.stl"
] | CC0 | https://www.printables.com/model/127957 | data_0049.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.