model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
37663 | USB extension cable mount for Prusa Mini | <p>Summary<br/>
A clamp for holding an extension USB cable on the vertical 3030 extrusion of the Original Prusa Mini. It uses two M5 sized 3030 Tnuts.</p>
<h3>Print instructions</h3><p>Printer:<br/>
I3 MK3S<br/>
Rafts: No<br/>
Supports: No<br/>
Resolution: 0.2mm<br/>
Infill: 15%<br/>
Filament_brand: Esun<br/>
Filament_... | [
"prusa",
"frame",
"cable",
"mini",
"original",
"mount",
"3030",
"usb",
"vertical",
"extension"
] | 3D Printers > Prusa Parts & Upgrades | [
"37663/images/image_1_compressed.jpg",
"37663/images/image_2_compressed.jpg",
"37663/images/image_3_compressed.jpg"
] | [
"37663/stls/prusa-mini-usb-extension-mount.stl"
] | CC0 | https://www.printables.com/model/37663 | data_0049.tar |
292746 | USB memory stick holder expandeble | <p>this USB stick holder can hold 6 USB sticks, and can be linked together if you make more of them.</p> | [] | Gadgets > Other Gadgets | [
"292746/images/image_1_compressed.jpg",
"292746/images/image_2_compressed.jpg",
"292746/images/image_3_compressed.jpg"
] | [
"292746/stls/USB holder v4.stl"
] | CC0 | https://www.printables.com/model/292746 | data_0049.tar |
861070 | USB port for stock Voron 2.4/Trident skirts | <p>This cheap mod will allow you to add a USB port to your stock Voron 2.4/Trident skirts using strips. The holder will only fit in the top hexagonal holes of the skirt and has very little play.</p><p>You will need:</p><p>1 ~3.5mm strip.<br>2 ~2.5mm strips.<br>I used this USB extension cable: <a href="https://www.aliex... | [
"usb",
"voron"
] | 3D Printers > Voron Parts & Upgrades | [
"861070/images/image_1_compressed.jpg",
"861070/images/image_2_compressed.jpg"
] | [] | GPL3.0 | https://www.printables.com/model/861070 | data_0049.tar |
737546 | USB SDCard Organizer | <p>YAHU - Yet Another Holder for USB<br><br>I found an already pretty nice usb organizer (as linked) but a for many others there aren't any usb-c ports. <br><br>There will be a second version in the future with a few improvements (the USB-C is pretty tight at the moment)<br>Additionally to the print and mode... | [
"usb",
"sdcardholder",
"usbholder",
"usbc"
] | Hobby & Makers > Organizers | [
"737546/images/image_1_compressed.jpg",
"737546/images/image_2_compressed.jpg"
] | [
"737546/stls/usb_holder_v2.stl"
] | CC0 | https://www.printables.com/model/737546 | data_0049.tar |
345548 | USB-A Organizer | Holds up to 10 USB-A devices | Download free 3D printable STL models | [
"usb",
"usba",
"usbstick",
"usbstickholder"
] | Gadgets > Computers | [
"345548/images/image_1_compressed.jpg"
] | [
"345548/stls/USB Organizer.stl"
] | CC-BY | https://www.printables.com/model/345548 | data_0049.tar |
473014 | USB-B Port Cap | <p>Does your 3D printer or other device have a seldom-used USB-B port? Want to keep it clean in a dusty shop? Print a USB-B port cover and you’re good to go! Designed with grip in mind for easy removal.</p> | [
"prusa",
"accessory",
"3dprinter",
"thingiverse",
"dustcover"
] | 3D Printers > Accessories | [
"473014/images/image_1_compressed.jpg",
"473014/images/image_2_compressed.jpg",
"473014/images/image_3_compressed.jpg",
"473014/images/image_4_compressed.jpg"
] | [
"473014/stls/USB-B_Cap.stl"
] | CC-BY | https://www.printables.com/model/473014 | data_0049.tar |
1113823 | Usb-C cable holder | <p>Usb-C cable holder uses double tape.</p> | [
"holder",
"cable",
"usb",
"usbc",
"drzak",
"cableholder",
"drzakkabelu"
] | Household > Office | [
"1113823/images/image_1_compressed.jpg",
"1113823/images/image_2_compressed.jpg"
] | [
"1113823/stls/USB-C cable holder.stl"
] | CC-BY | https://www.printables.com/model/1113823 | data_0049.tar |
322026 | USC Tommy Trojan Drum Major Lego Helmet | <p>A helmet that was never included in the Tommy Trojan/Drum Major Lego kit. You'll also wanna print a sword, cuz it didn't have one of those included either!</p><p><a href="https://www.printables.com/model/248800-tommy-trojan-lego-sword">https://www.printables.com/model/248800-tommy-trojan-lego-sword</a></p><p>T... | [
"figurine",
"helmet",
"lego",
"tommy",
"trojan"
] | Toys & Games > Action Figures & Statues | [
"322026/images/image_1_compressed.jpg",
"322026/images/image_2_compressed.jpg",
"322026/images/image_3_compressed.jpg"
] | [
"322026/stls/Helmet NS.stl",
"322026/stls/Helmet.stl"
] | CC-BY | https://www.printables.com/model/322026 | data_0049.tar |
70476 | Use the force - Toilet Vader | <p>Not my own design, this is a remix from <a href="https://www.thingiverse.com/thing:3592828">https://www.thingiverse.com/thing:3592828</a><br/>
The stl is split up in 2 pieces to be printed in 2 colours with dual extrusion or separate</p>
Category: 2D Art | [
"thingiverse"
] | Art & Design > 2D Plates & Logos | [
"70476/images/image_1_compressed.jpg",
"70476/images/image_2_compressed.jpg"
] | [
"70476/stls/Use_the_Force_p1.stl",
"70476/stls/Use_the_Force_p2.stl"
] | CC-BY | https://www.printables.com/model/70476 | data_0049.tar |
612311 | Useful ACCESSORIES for Cooler Master QUBE 500 | <p>With these accessories, you can uleash your creativity and create endless layouts to attach on your PC. You can personalize it and turn your PC into a work of art. In case you have any suggestions on how to make a certain part fit better, please don't esitate to contact me, and I will promptly make the necessary adj... | [
"prusa",
"vase",
"spool",
"organizer",
"3d",
"mk3",
"holder",
"desk",
"pen",
"plant",
"cutter",
"3dprinting",
"spoolholder",
"computer",
"customizable",
"gadget",
"pliers",
"usb",
"organization",
"accessories",
"3dprinter",
"ssd",
"sdcard",
"step",
"deskorganizer",
... | Hobby & Makers > Organizers | [
"612311/images/image_1_compressed.jpg",
"612311/images/image_2_compressed.jpg",
"612311/images/image_3_compressed.jpg",
"612311/images/image_4_compressed.jpg",
"612311/images/image_5_compressed.jpg",
"612311/images/image_6_compressed.jpg"
] | [
"612311/stls/3_Card_6_Micro_6_USB.stl",
"612311/stls/3_Card_8_Micro.stl",
"612311/stls/3_USB.stl",
"612311/stls/3_USB_6_Micro.stl",
"612311/stls/5_USB.stl",
"612311/stls/6_Card_10_Micro.stl",
"612311/stls/6_USB.stl",
"612311/stls/7_USB.stl",
"612311/stls/Allenkey_minisupport.stl",
"612311/stls/All... | CC-BY | https://www.printables.com/model/612311 | data_0049.tar |
742209 | USPSA Magazine Gauge | <p>A go/no-go gauge for 141.25 mm and 171.25 mm magazine lengths for various classes of USPSA competition. <a href="https://www.ssusa.org/content/proper-use-of-the-uspsa-magazine-gauge-box/">See here for proper use.</a></p><p>Prints on a 180x180mm (Prusa Mini+) bed at 45 degree rotation. </p><p>Recommended layer h... | [
"gauge",
"magazine",
"measurement",
"uspsa"
] | Sports & Outdoor > Outdoor Sports | [
"742209/images/image_1_compressed.jpg",
"742209/images/image_2_compressed.jpg",
"742209/images/image_3_compressed.jpg",
"742209/images/image_4_compressed.jpg"
] | [
"742209/stls/USPSA Mag Gauge.stl"
] | CC-BY | https://www.printables.com/model/742209 | data_0049.tar |
248403 | Utility Blade Case/Storage | <p>Simple little case for storing up to about 6 utility blades.</p><p>Doesn't have a latching mechanism to hold it closed, but when I printed it it seems to stay closed reasonably well due to friction.</p><p>Please ignore my bad print quality</p> | [] | Hobby & Makers > Organizers | [
"248403/images/image_1_compressed.jpg",
"248403/images/image_2_compressed.jpg"
] | [
"248403/stls/Utility Blade Case Bottom.stl",
"248403/stls/Utility Blade Case Top.stl",
"248403/stls/Utility Blade Case.stl"
] | GPL2.0 | https://www.printables.com/model/248403 | data_0049.tar |
699832 | Utility blade scraper with blade guard - blades with three notches | <p>I have these wird blades with three notches, these did not fit in the original model. I you want to check if your blades fit here please check the drawing with the measurements.</p><p>Secondly I added a magnetic blade guard, optimized for printing upright. It fits two 5*5*2mm magnets, these just lightly pressed in f... | [
"scraper",
"magneticbox",
"bladeguard",
"utilityblade"
] | Hobby & Makers > Tools | [
"699832/images/image_1_compressed.jpg",
"699832/images/image_2_compressed.jpg",
"699832/images/image_3_compressed.jpg",
"699832/images/image_4_compressed.jpg",
"699832/images/image_5_compressed.jpg"
] | [
"699832/stls/protective cap.stl",
"699832/stls/Utility_Base_3notches.stl",
"699832/stls/Utility_Clamp_modified_3notches.stl"
] | CC0 | https://www.printables.com/model/699832 | data_0049.tar |
533692 | Utility Knife Holder - Honeycomb wall storage system | <p>I printed it in 0.2 layer height.</p><p>I added the .STEP file for easy editing and remix.</p><p>Enjoy!</p> | [
"holder",
"knife",
"knifeholder",
"utilityknife",
"exactoknife",
"honeycombstorage",
"honeycombstoragewall",
"honeycombwall"
] | Hobby & Makers > Organizers | [
"533692/images/image_1_compressed.jpg",
"533692/images/image_2_compressed.jpg"
] | [
"533692/stls/Honeycomb-CutterHolder.stl"
] | CC0 | https://www.printables.com/model/533692 | data_0049.tar |
601960 | utility knife scraper remixed | <p>do not want to take all the credit. </p><p>this is a remix with a bit more comfortable corners as well as a top blate that holds down the knife.</p><p>2x m3 4.2x3mm inserts nuts needed.</p> | [
"knife",
"scraper",
"utility",
"utilityknife"
] | 3D Printers > Accessories | [
"601960/images/image_1_compressed.jpg",
"601960/images/image_2_compressed.jpg"
] | [
"601960/stls/utility knife scrapper remixed_.stl"
] | CC-BY | https://www.printables.com/model/601960 | data_0049.tar |
483602 | Utilitzrian Cable Wrap | <p>Simplifed design that reduces the weight and improves the strenth of the cable wrap.</p> | [
"upgrade",
"spool",
"cable",
"dual",
"cablemanagement",
"cableholder",
"crab",
"exquisitely"
] | Hobby & Makers > Tools | [
"483602/images/image_1_compressed.jpg"
] | [
"483602/stls/Cable Snap 10.7 mm.stl",
"483602/stls/Cable Wrap - Short Handle.stl",
"483602/stls/Cable Wrap - Spanner.stl",
"483602/stls/Retainer - Long - Bottom.stl"
] | CC-BY | https://www.printables.com/model/483602 | data_0049.tar |
802493 | Utrechtse Dom Toren | <p>The famous Tower of Utrecht</p> | [
"statue",
"tower",
"holland",
"city",
"utrecht"
] | World & Scans > Architecture & Urbanism | [
"802493/images/image_1_compressed.jpg"
] | [
"802493/stls/Dom_toren_Tap_V2.stl"
] | CC-BY | https://www.printables.com/model/802493 | data_0049.tar |
1730173 | V-block, 1-V, parametric, OpenSCAD | <p>There are two .scad file, one with simple sharp corners, and one using <code>include <Round-Anything/polyround.scad>// </code>from <a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://github.com/Irev-Dev/Round-Anything">https://github.com/Irev-Dev/Round-Anything</a... | [
"vblock"
] | Hobby & Makers > Tools | [
"1730173/images/image_1_compressed.jpg",
"1730173/images/image_2_compressed.jpg",
"1730173/images/image_3_compressed.jpg",
"1730173/images/image_4_compressed.jpg",
"1730173/images/image_5_compressed.jpg"
] | [
"1730173/stls/vblockr_120deg_115x50x15.stl",
"1730173/stls/vblockr_120deg_50x25x10.stl",
"1730173/stls/vblockr_25x25x25_3hole.stl",
"1730173/stls/vblockr_25x25x25_3x13mm.stl",
"1730173/stls/vblockr_40x40x40_3hole.stl",
"1730173/stls/vblockr_40x40x40_3sq_hole.stl",
"1730173/stls/vblockr_40x40x40_3x25sq_1... | CC-BY | https://www.printables.com/model/1730173 | data_0049.tar |
130214 | V-Bucks from Fortnite - 2 Part Print / multicolour | <p>No special print instructions, Bottom's totally flat, so print flush. Inserts have a 0.1mm clearance all round for a total of 0.2mm if you want to print them in a different colour. though these will be tricky to do with an FDM printer. Created this with Fusion360 and have included the actual Fusion file also for you... | [
"coin",
"fortnite",
"fortnitevbucks",
"vbucks",
"vbux"
] | Gadgets > Video Games | [
"130214/images/image_1_compressed.jpg",
"130214/images/image_2_compressed.jpg",
"130214/images/image_3_compressed.jpg"
] | [
"130214/stls/VBUCKS MAIN BODY v4.stl",
"130214/stls/VBUCKS MAIN INSERTS v4.stl"
] | CC-BY | https://www.printables.com/model/130214 | data_0049.tar |
532018 | V-Dipole antena holder | <p>A holder for a generic antenna that you can buy cheap on ebay or anywhere else. This auxiliary bracket is for fixing the antenna as a V-Dipole for receiving broadcasts from satellites noa at a frequency of 137 MHz. The antenna should be extended to a length of 53 cm</p><p><strong>Print parameters</strong><br><strong... | [
"antenna",
"radio",
"ham",
"satellite",
"sdr",
"satelliteantenna",
"noaa"
] | Hobby & Makers > Electronics | [
"532018/images/image_1_compressed.jpg",
"532018/images/image_2_compressed.jpg",
"532018/images/image_3_compressed.jpg",
"532018/images/image_4_compressed.jpg",
"532018/images/image_5_compressed.jpg",
"532018/images/image_6_compressed.jpg",
"532018/images/image_7_compressed.jpg"
] | [
"532018/stls/VDIPOLE (1).stl"
] | CC-BY | https://www.printables.com/model/532018 | data_0049.tar |
1465423 | V-Slot 2020 Internal Corner Connector (Reinforced) | <p>This is a <strong>reinforced internal 90° connector</strong> for <strong>2020 V-slot aluminum extrusion profiles</strong>.<br>It fits snugly inside two intersecting profiles, joining them at a <strong>perfect right angle (90°)</strong> with a secure <strong>snap-fit / friction-fit connection</strong>.</p><p>This upd... | [
"frame",
"extrusion",
"fit",
"snap",
"cnc",
"2020",
"3dprinter",
"connector",
"corner",
"internal",
"profile",
"vslot",
"openbuilds",
"joiner",
"90degree",
"reinforced"
] | Hobby & Makers > Mechanical Parts | [
"1465423/images/image_1_compressed.jpg",
"1465423/images/image_2_compressed.jpg",
"1465423/images/image_3_compressed.jpg"
] | [
"1465423/stls/vslot internal connector.stl"
] | CC0 | https://www.printables.com/model/1465423 | data_0049.tar |
857180 | V-Spooler Wider Cam Tooth Carrier | <p>This is a fix for the V-spooler. The Cam guide stuck and I had no luck with it. But another user on bambulabs had made a wider guide and a larger cam tooth. so I made the files myself and now it works a treat.</p> | [
"rewinder",
"vspooler"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"857180/images/image_1_compressed.jpg",
"857180/images/image_2_compressed.jpg"
] | [
"857180/stls/V-Spooler Wider Cam_Tooth_Carrier Bambu.stl"
] | CC0 | https://www.printables.com/model/857180 | data_0049.tar |
408741 | V0 RGB Skirt Logo | <h3>V0 RGB Skirt Logo</h3><p> </p><p>RGB Voron Logos in the V0.2 Skirts using the amazing <a href="https://github.com/tanaes/whopping_Voron_mods/tree/main/LEDs/Rainbow_Barf_Logo_LED">Rainbow Barf Logo LED</a></p><p> </p><p><strong>BOM</strong></p><p>2x Rainbow Barf LED Logo PCB - <a href="https://github.com/t... | [
"voron",
"v0"
] | 3D Printers > Other Printer Parts & Upgrades | [
"408741/images/image_1_compressed.jpg",
"408741/images/image_2_compressed.jpg"
] | [
"408741/stls/[c]_logo_insert_x2.stl",
"408741/stls/[o]_rainbow_barf_carrier_x2.stl"
] | GPL3.0 | https://www.printables.com/model/408741 | data_0049.tar |
470918 | V0.2 Umbilical PCB Mount for DragonBurner and Sherpa Mini | <p>This model adapts the V0.2 Umbilical PCB holder to be compatible with the DragonBurner toolhead and the Sherpa Mini as the extruder. </p><p>You need 4 standard M3 heat set inserts for the spacers. The original spacer are not long enough and have been extended. </p><p><strong>Update 2023-05-09: </stro... | [
"voron",
"sherpamini",
"v0",
"v02",
"dragonburner"
] | 3D Printers > Other Printer Parts & Upgrades | [
"470918/images/image_1_compressed.jpg",
"470918/images/image_2_compressed.jpg"
] | [
"470918/stls/Strain Relief Spacer_x2.stl",
"470918/stls/V0.2-Umbilical-Toolhead_PCB-Mount.stl"
] | GPL3.0 | https://www.printables.com/model/470918 | data_0049.tar |
716399 | V0.2 Umbilical/Picobilical PCB mount for DragonBurner | <p>I like the Picobilical PCB style mount and the angle at which it is mounted. But I don't like the way the PCB is mounted.</p><p>So I modified the Picobilical PCB mount to fit the Umbilical from the Formbot kit on the DragonBurner.</p><ul><li>The PCB is attached to the heat inserts.</li><li>I added eyelets to attach ... | [
"sherpa",
"sherpamini",
"umbilical",
"v02",
"picobilical",
"dragonburner"
] | 3D Printers > Voron Parts & Upgrades | [
"716399/images/image_1_compressed.jpg",
"716399/images/image_2_compressed.jpg",
"716399/images/image_3_compressed.jpg",
"716399/images/image_4_compressed.jpg",
"716399/images/image_5_compressed.jpg"
] | [
"716399/stls/Umbilical-Picobilical DragonBurner Toolhead Mount.stl"
] | GPL3.0 | https://www.printables.com/model/716399 | data_0049.tar |
570332 | V0.2 xy joint pins mod | <p>No Supports!</p><p>Each side prints in one piece with a modeled in bridge that will need to be cut out after printing. No need for any heat set inserts or spacers, just slide the bearing stacks in and press the 3mm pin into the part. A 2mm hole on the opposite end of each pin hole can be used to remove the pin... | [
"voron",
"v0",
"v02",
"v02r1"
] | 3D Printers > Other Printer Parts & Upgrades | [
"570332/images/image_1_compressed.jpg",
"570332/images/image_2_compressed.jpg",
"570332/images/image_3_compressed.jpg",
"570332/images/image_4_compressed.jpg",
"570332/images/image_5_compressed.jpg"
] | [
"570332/stls/XY Joint Left pins.stl",
"570332/stls/XY Joint right pins.stl"
] | GPL3.0 | https://www.printables.com/model/570332 | data_0049.tar |
1409143 | V2 . MTG Basic Deck Box – Magic: The Gathering Logo (Holds 60 Sleeved Cards) | <p>"This 3D printed basic deck box is designed specifically for Magic: The Gathering players. With enough space to hold 60 sleeved cards, it keeps your deck safe, compact, and easy to carry. Featuring the iconic Magic: The Gathering logo, this box is the perfect blend of practicality and style for any MTG fan. This V2 ... | [
"magicthegathering",
"tradingcardgame",
"cardstorage",
"mtgdeckbox",
"sleevedcards",
"mtglogo",
"deckbox60cards",
"3dprinteddeckbox",
"tcgdeckbox",
"geekaccessories"
] | Toys & Games > Board Games | [
"1409143/images/image_1_compressed.jpg",
"1409143/images/image_2_compressed.jpg",
"1409143/images/image_3_compressed.jpg",
"1409143/images/image_4_compressed.jpg",
"1409143/images/image_5_compressed.jpg",
"1409143/images/image_6_compressed.jpg"
] | [
"1409143/stls/Deck_Box_60_Down.stl",
"1409143/stls/Deck_Box_60_Top.stl"
] | CC-BY | https://www.printables.com/model/1409143 | data_0049.tar |
886772 | V29 Whistle remix | <p>Printed in PLA, other than that, very easy to print.</p> | [] | Toys & Games > Outdoor Toys | [
"886772/images/image_1_compressed.jpg"
] | [
"886772/stls/V29 Whistle remix.stl"
] | CC-BY | https://www.printables.com/model/886772 | data_0049.tar |
353050 | v400 Spool Holder Upgrade - Longer | <p>The original version was too short to comfortably hold my Hatchbox filament rolls. Also, the little tabs on the bottom were slightly too close together and it wouldn't snap in to place. Eventually, it would fall off. This new version is 100mm long and the locking tabs are spaced ever so slightly farther apart. You m... | [] | 3D Printers > Other Printer Parts & Upgrades | [
"353050/images/image_1_compressed.jpg"
] | [
"353050/stls/v400 spool holder upgrade (now with extra millimeters).stl"
] | GPL2.0 | https://www.printables.com/model/353050 | data_0049.tar |
238149 | V6 Nozzle Knob | <p>Have you ever gazed into the night sky and wondered how to stop losing your V6 nozzles?<br>Probably not… but now you never will!<br> </p><p>Introducing the Nozzle Knob, a quick print that replaces your Prusa Mini knob with a similar-looking knob, but with built-in storage for 3 V6 nozzles.</p><p>It's a very eas... | [
"knob",
"nozzle",
"lcd",
"nozzleholder",
"e3dv6",
"prusamini",
"printerupgrades"
] | 3D Printers > Other Printer Parts & Upgrades | [
"238149/images/image_1_compressed.jpg",
"238149/images/image_2_compressed.jpg",
"238149/images/image_3_compressed.jpg",
"238149/images/image_4_compressed.jpg",
"238149/images/image_5_compressed.jpg"
] | [
"238149/stls/nozzleknob.stl"
] | CC-BY | https://www.printables.com/model/238149 | data_0049.tar |
436724 | V60 coffee dripper | <p>Slightly modified version of V60 coffee dripper that doesn't need supports (I changed the handle and the bottom part with smaller overhangs and separated rim), you just slide the rim on the body and eventually put glue to the joint if it's not already tight enough.</p><p><strong>!HEALTH SAFETY WARNING!</strong></p><... | [
"coffee",
"pour",
"dripper",
"pourover",
"coffeemaker",
"barista",
"coffeedripper",
"homebarista",
"travelbarista"
] | Household > Kitchen | [
"436724/images/image_1_compressed.jpg",
"436724/images/image_2_compressed.jpg",
"436724/images/image_3_compressed.jpg"
] | [
"436724/stls/V60_body.stl",
"436724/stls/V60_rim.stl"
] | CC-BY | https://www.printables.com/model/436724 | data_0049.tar |
951021 | Vaccum cleaner adapter Karcher | [
"adapter",
"hose",
"cleaner",
"vaccum",
"karcher"
] | Household > Other House Equipment | [
"951021/images/image_1_compressed.jpg",
"951021/images/image_2_compressed.jpg",
"951021/images/image_3_compressed.jpg"
] | [
"951021/stls/vaccum cleaner adapter Karcher.stl"
] | CC0 | https://www.printables.com/model/951021 | data_0049.tar | |
119400 | VACCUM: Drill-Dust-Sucker |
<p>Wanna hang a picture? But don't like the dust tickeling down on your sofas?<br/>
This adapter for your vacuum will stick to the wall by the mighty vacuum force and suck away all the dust where it is produced. As long as it is an Elektrolux vacuum cleaner, that is.<br/>
Otherwise you might want to model an adapt... | [
"wall",
"drill",
"vacuum",
"drilling",
"thingiverse",
"hole"
] | Hobby & Makers > Other Ideas | [
"119400/images/image_1_compressed.jpg",
"119400/images/image_2_compressed.jpg",
"119400/images/image_3_compressed.jpg"
] | [
"119400/stls/Vacuum-Drill.stl"
] | CC-BY | https://www.printables.com/model/119400 | data_0049.tar |
683855 | Vacuum Bag Seal Clip (fusion360) | <p>Due to their small size, losing them was always a worry for me. Therefore, I recreated the model to be able to print more if needed. This printed version works as well as the provided ones.</p><p>If the provided clip was too small for your liking, you can also easily widen it in fusion360. I also provided a slightly... | [
"parametric",
"bag",
"grip",
"clip",
"fusion360",
"seal",
"vacuum",
"close",
"zip",
"vacuumbag"
] | Hobby & Makers > Organizers | [
"683855/images/image_1_compressed.jpg"
] | [
"683855/stls/vacuum_bag_seal_clip.stl",
"683855/stls/vacuum_bag_seal_clip_grippy.stl"
] | CC-BY | https://www.printables.com/model/683855 | data_0049.tar |
5304 | VAG coil pack removal tool | <p>This is a VW/Audi coil pack removal tool that slips into the grooves on the top of the pack. Some valve covers might cause some clearance issues but it seems to work okay on the MkV BPY engine's packs. A similar Pack design is used on many VW/Audi cars.</p>
<h3>Print instructions</h3><p>I used .2mm, 20% infill</p> | [
"tool",
"volkswagen",
"automotive",
"audi"
] | Hobby & Makers > Tools | [
"5304/images/image_1_compressed.jpg",
"5304/images/image_2_compressed.jpg"
] | [
"5304/stls/gti-coil-removal-tool-v4.stl"
] | CC0 | https://www.printables.com/model/5304 | data_0049.tar |
757677 | Valentine Bookmark | <p>Nice print for your Valentine that is also a useful reminder of how you feel about them. </p><p>I uploaded two models, one with a small heart cutout in the middle, and the other without, so you can pick your preference.</p><p>I also uploaded a project for each of them that already has pauses for filament swaps... | [] | Art & Design > Other Art & Designs | [
"757677/images/image_1_compressed.jpg"
] | [
"757677/stls/Bookmark.stl",
"757677/stls/Bookmark_NoHole.stl",
"757677/stls/Bookmark_NoHole_Project_With_Pauses.stl",
"757677/stls/Bookmark_Project_With_Pauses.stl"
] | CC-BY | https://www.printables.com/model/757677 | data_0049.tar |
142853 | Valentine Heart Napkin Holder | <p>I wanted a napkin holder for my Valentine's Day decor so created this double heart design. d</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>CR-10S</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="deta... | [
"thingiverse",
"valentine",
"valentinesday",
"napkinholder"
] | Household > Kitchen | [
"142853/images/image_1_compressed.jpg",
"142853/images/image_2_compressed.jpg",
"142853/images/image_3_compressed.jpg"
] | [
"142853/stls/Heart_Napkin_Holder.stl"
] | CC-BY | https://www.printables.com/model/142853 | data_0049.tar |
380754 | Valentine Hearts - Two Hearts Together Forever | <p>This 3D sculpture is of two hearts together forever. It makes a great Valentines Day gift for your sweetheart.</p><p>This model is easy to print in two colors because the hearts and the inscription begin to print at the same layer. Use the “add color change” function in PrusaSlicer.</p><p>This model need... | [
"present",
"heart",
"hearts",
"sweetheart",
"valentine",
"valentinesday",
"valentinesdaygifts",
"heartvalentinesday",
"3dsculpture",
"valentinesgift",
"valentineheart",
"twohearts",
"togetherforever"
] | Art & Design > Sculptures | [
"380754/images/image_1_compressed.jpg",
"380754/images/image_2_compressed.jpg"
] | [
"380754/stls/Valentine Hearts.stl"
] | CC-BY | https://www.printables.com/model/380754 | data_0049.tar |
1431559 | Valkyrie Shuttle from Avatar | <p>This is a model of the Valkyrie Shuttle from the Avatar series. It is made as a kit and does not require any glue.<br>The model has several features:<br>Openable roof door<br>Movebale engine parts<br>VTOL engines can rotate<br>Openable back door<br>Retractable landing gear<br>Includes a stand<br><br>All the stl mode... | [
"ship",
"space",
"star",
"avatar",
"shuttle",
"valkyrie"
] | Toys & Games > Vehicles | [
"1431559/images/image_1_compressed.jpg",
"1431559/images/image_10_compressed.jpg",
"1431559/images/image_11_compressed.jpg",
"1431559/images/image_12_compressed.jpg",
"1431559/images/image_13_compressed.jpg",
"1431559/images/image_14_compressed.jpg",
"1431559/images/image_15_compressed.jpg",
"1431559/... | [
"1431559/stls/xxx_-_lg.stl",
"1431559/stls/xxx_-_lg2_4x.stl",
"1431559/stls/xxx_-_lg3_4x.stl",
"1431559/stls/xxx_-_lgf.stl",
"1431559/stls/xxx_-_pin_10x10.stl",
"1431559/stls/xxx_-_pin_4x15_8x.stl",
"1431559/stls/xxx_-_pin_4x20_2x.stl",
"1431559/stls/xxx_-_pin_4x50_6x.stl",
"1431559/stls/xxx_-_pin_4... | CC-BY | https://www.printables.com/model/1431559 | data_0049.tar |
915438 | Valorant Jett Knife | <p>This is the Knife I extracted from the game files. I also divided it into two halves so it can be printed easily. <br> </p><p>I recommend at least 40% infill to because of the weight.</p><p><br>After printing, you just have to stick them together.</p> | [
"knife",
"valorant"
] | Costumes & Accessories > Props | [
"915438/images/image_1_compressed.jpg",
"915438/images/image_2_compressed.jpg"
] | [
"915438/stls/Jett Knife.stl"
] | CC-BY | https://www.printables.com/model/915438 | data_0049.tar |
172417 | Valve Cap | <p>full size valve cap threaded for Presta, Rennradventil, Sclaverand</p><p><strong>Resolution:</strong></p><p>0.2</p><p><strong>Infill: </strong></p><p>100%</p> | [
"thingiverse",
"presta",
"valvecap",
"ventil",
"rennventil",
"sclaverand"
] | Sports & Outdoor > Outdoor Sports | [
"172417/images/image_1_compressed.jpg",
"172417/images/image_2_compressed.jpg"
] | [
"172417/stls/Ventilkappen.stl"
] | CC-BY | https://www.printables.com/model/172417 | data_0049.tar |
165997 | Valve Index 200g clip-on counterweight | <p>This is a 200g counterweight which can be attached to the lower backhead brace of the Valve Index. It helps to shift the weight into the center of the head.</p><p>For weight, 50 x 5€ct coins are used. For assembly, 6 x 15mm M3 countersunk machine screws are used.</p><p>Attachment can either be done by using the two ... | [
"valve",
"thingiverse",
"valveindex"
] | Gadgets > Virtual Reality | [
"165997/images/image_1_compressed.jpg",
"165997/images/image_2_compressed.jpg"
] | [
"165997/stls/weight_base_2.stl",
"165997/stls/weight_clamp_a_2.stl",
"165997/stls/weight_clamp_b_2.stl",
"165997/stls/weight_lid_2.stl"
] | CC-BY | https://www.printables.com/model/165997 | data_0049.tar |
40834 | Valve Index Cable Strain relief | <p>I noticed a kink forming on my index cable right at the original cable clip on the rear left side (see second picture). So I wanted a solution to help avoid that. A side benefit is the cable now comes out directly behind you so I am now less likely to step on it while moving side to side.</p>
<p>I based my design o... | [
"cable",
"clip",
"valve",
"index",
"strainrelief",
"thingiverse",
"cableclip",
"valveindex"
] | Gadgets > Virtual Reality | [
"40834/images/image_1_compressed.jpg",
"40834/images/image_2_compressed.jpg",
"40834/images/image_3_compressed.jpg"
] | [
"40834/stls/valve_index_strain_relief_v2.stl"
] | CC-BY | https://www.printables.com/model/40834 | data_0049.tar |
468141 | Valve stem CAPpuccinos | <p>Looking to add a little pep to your step? Look no further these valve stem CAPpuccinos are proven to give you .5 extra horsepower. These valve stem caps should fit on most Schrader valves. Meaning they'll fit a lot of common bicycle and automotive tires.</p><p> </p><p><strong>Bill of materials:</strong></p><p>R... | [
"cute",
"funny",
"fun",
"valve",
"coffee",
"bicycle",
"bike",
"schrader",
"valvecap",
"cappuccino",
"schradervalve",
"valvecover",
"valvestem"
] | Sports & Outdoor > Outdoor Sports | [
"468141/images/image_1_compressed.jpg",
"468141/images/image_2_compressed.jpg",
"468141/images/image_3_compressed.jpg"
] | [
"468141/stls/valve-stem-CAPpuccinos.stl"
] | CC-BY | https://www.printables.com/model/468141 | data_0049.tar |
614903 | Vampire teeth | <p>Pla 5%</p><p>You may need help sticking to bed.</p><p>No supports needed.</p> | [
"vampire",
"dracula",
"bite",
"vampiro",
"morder"
] | Costumes & Accessories > Props | [
"614903/images/image_1_compressed.jpg",
"614903/images/image_2_compressed.jpg",
"614903/images/image_3_compressed.jpg",
"614903/images/image_4_compressed.jpg"
] | [
"614903/stls/Dientes Vampiro.stl"
] | CC-BY | https://www.printables.com/model/614903 | data_0049.tar |
109000 | vanGogh paint tube opener | [
"tool",
"practicalprint",
"painting",
"artist",
"tubeopener",
"watercolorpainting"
] | Hobby & Makers > Tools | [
"109000/images/image_1_compressed.jpg"
] | [
"109000/stls/vanGogh_paint_tube_opener.stl"
] | GPL3.0 | https://www.printables.com/model/109000 | data_0049.tar | |
960703 | Vanir Cruiser from Stargate | <p>This is a model of the Vanir Cruiser I designed. Just like the one shown in the SGA 5x10/11, it comes with several features. All the moving parts shown in the show are presented on the model as well and all are movable. I had to take few liberties caused by 3D printing, but otherwise the model is quite faithfull to ... | [
"ship",
"space",
"star",
"lost",
"gate",
"asgard",
"tribe",
"vanir"
] | Toys & Games > Vehicles | [
"960703/images/image_1_compressed.jpg",
"960703/images/image_2_compressed.jpg",
"960703/images/image_3_compressed.jpg",
"960703/images/image_4_compressed.jpg",
"960703/images/image_5_compressed.jpg",
"960703/images/image_6_compressed.jpg",
"960703/images/image_7_compressed.jpg",
"960703/images/image_8... | [
"960703/stls/xxx_-_connector_10x10.stl",
"960703/stls/xxx_-_conn_20x40.stl",
"960703/stls/xxx_-_detail_2x.stl",
"960703/stls/xxx_-_engine.stl",
"960703/stls/xxx_-_link1_4x.stl",
"960703/stls/xxx_-_pin_5x11.stl",
"960703/stls/xxx_-_pin_5x14.stl",
"960703/stls/xxx_-_vanir_1.stl",
"960703/stls/xxx_-_va... | CC-BY | https://www.printables.com/model/960703 | data_0049.tar |
1101275 | VANOCE | Hanging Snowflake, Christmas Tree | <p><strong>VANOCE | Hanging Snowflake, Christmas Tree</strong></p><p>The <strong>3D hanging snowflake</strong> from my collection of <a href="https://www.printables.com/@chregaud_1573771/collections/1905595">Christmas Tree decorations</a>.</p><p>You can get the copper silk PLA filament from Amazon here:</p><ul><li>For ... | [
"snowflakes",
"snowflake",
"christmas",
"snow",
"free",
"fastprint",
"christmasornament",
"christmasdecoration",
"christmastree",
"homedecor",
"noel",
"snowflaketreeornament",
"christmastreeornament",
"homedecoration",
"arboldenavidad",
"navidad",
"neige",
"natale",
"snowflakedec... | Seasonal designs > Winter & Christmas & New Year's | [
"1101275/images/image_1_compressed.jpg",
"1101275/images/image_2_compressed.jpg",
"1101275/images/image_3_compressed.jpg",
"1101275/images/image_4_compressed.jpg"
] | [
"1101275/stls/VANOCE_Snowflake.stl"
] | CC-BY | https://www.printables.com/model/1101275 | data_0049.tar |
1355059 | Vapor-lock resistant funnels | <p>Vapor-lock resistant funnels feature three outer channels that release air during pouring, stopping splashback and flow.</p> | [
"funnel"
] | Household > Kitchen | [
"1355059/images/image_1_compressed.jpg"
] | [
"1355059/stls/Vapor-lock resistant funnel 10mm spout.stl",
"1355059/stls/Vapor-lock resistant funnel 15mm spout.stl",
"1355059/stls/Vapor-lock resistant funnel 20mm spout.stl"
] | CC0 | https://www.printables.com/model/1355059 | data_0049.tar |
965484 | Varenyky (pierogi) maker | <p>Для тих, хто любить домашні вареники, але не любить їх ліпити. Інструмент відрізняється від магазинних досить агресивними зубцями, завдяки яким надійно заліплює вареник, навіть коли в шов потрапляє начинка, заодно обрізає зайве тісто. Таким чином, немає потреби вирізати однакові круглі заготовки із великого листа, м... | [
"press",
"pasta",
"cutter",
"dough",
"thingiverse",
"ravioli",
"pierogi",
"varenik",
"pierogimaker"
] | Household > Kitchen | [
"965484/images/image_1_compressed.jpg",
"965484/images/image_2_compressed.jpg",
"965484/images/image_3_compressed.jpg",
"965484/images/image_4_compressed.jpg",
"965484/images/image_5_compressed.jpg",
"965484/images/image_6_compressed.jpg"
] | [
"965484/stls/varenyky_v8.stl"
] | CC-BY | https://www.printables.com/model/965484 | data_0049.tar |
243705 | Variety of Lightning Earrings | <p>I saw a cool outfit worn by Lana Condor on the Boo, B*tch series on Netflix and wanted to recreate it. In order to that, I needed the same earrings. While I was at it, I decided to make 3 different types to choose from. The color change ones are my personal favorite.</p><ul><li>Full lightning bolt with one single co... | [
"earrings",
"lightning",
"dangleearrings"
] | Fashion > Other Fashion Accessories | [
"243705/images/image_1_compressed.jpg",
"243705/images/image_2_compressed.jpg",
"243705/images/image_3_compressed.jpg"
] | [
"243705/stls/lightning-color-change.stl",
"243705/stls/lightning-empty.stl",
"243705/stls/lightning-full.stl"
] | CC-BY | https://www.printables.com/model/243705 | data_0049.tar |
208232 | various measuring spoons (0.5, 1, 1.5, 2, and 3 tablespoon) |
<p>remixed from <a href="https://www.thingiverse.com/thing:682146">https://www.thingiverse.com/thing:682146</a></p>
<p>Beefier and with a longer handle than the default settings.</p>
<p>0.5 Tablespoon</p>
<p>1 Tablespoon</p>
<p>1.5 Tablespoon</p>
<p>2 Tablespoon</p>
<p>3 Tablespoon</p>
<p>I printed a couple of them ... | [
"thingiverse"
] | Household > Kitchen | [
"208232/images/image_1_compressed.jpg",
"208232/images/image_2_compressed.jpg",
"208232/images/image_3_compressed.jpg",
"208232/images/image_4_compressed.jpg",
"208232/images/image_5_compressed.jpg"
] | [
"208232/stls/measuring_spoon_0p5_tbsp.stl",
"208232/stls/measuring_spoon_1p0_tbsp.stl",
"208232/stls/measuring_spoon_1p5_tbsp.stl",
"208232/stls/measuring_spoon_2p0_tbsp.stl",
"208232/stls/measuring_spoon_3p0_tbsp.stl"
] | CC-BY | https://www.printables.com/model/208232 | data_0049.tar |
42695 | Vase 12 | <p>I've played a little bit with the pipe command in Fusion 360 and the result is a little set of vases (or perhaps containers for pencils, spoons etc.) that might be pleasing to you.</p>
<p>If you like this little thing, you might want to check those ones, too:</p>
<p><a href="https://www.printables.com/social/3373-wi... | [
"vase",
"container",
"fusion360",
"vases",
"flowervase",
"thingiverse",
"autodeskfusion360",
"flowervases",
"containers"
] | Household > Home Decor | [
"42695/images/image_1_compressed.jpg"
] | [
"42695/stls/vase-12high.stl",
"42695/stls/vase-12low.stl"
] | CC-BY | https://www.printables.com/model/42695 | data_0049.tar |
904492 | vase elegant | <p>Powered by Make My Vase from MakerWorld (https://makerworld.com/makerlab/makeMyVase)</p> | [
"vase",
"holder",
"flower",
"art",
"home",
"vasemode",
"flowervase",
"vasemodeprinting",
"vaseart"
] | Household > Home Decor | [
"904492/images/image_1_compressed.jpg",
"904492/images/image_2_compressed.jpg"
] | [
"904492/stls/Vase Draft.stl"
] | CC0 | https://www.printables.com/model/904492 | data_0049.tar |
286996 | Vase Generator (with examples) | <p>The code allows you to choose from 5 cross-sections, combined with 3 profiles. In addition, there are variables to control the size of the vase, the number of lobes or sides, and the amount of twist.</p><p>Ten example STLs are included.</p><p>To execute the SCAD code, you'll need the following libraries:</p><ul><li>... | [
"vase",
"openscad",
"configurable"
] | Household > Home Decor | [
"286996/images/image_1_compressed.jpg",
"286996/images/image_2_compressed.jpg"
] | [
"286996/stls/circle-greek.stl",
"286996/stls/dodec-flor-sine.stl",
"286996/stls/hex-bev-cyl.stl",
"286996/stls/hex-bev-greek.stl",
"286996/stls/hex-bev-sine.stl",
"286996/stls/hex-flor-greek-no-twist.stl",
"286996/stls/hex-flor-sine-360.stl",
"286996/stls/hex-flor-sine.stl",
"286996/stls/oct-poly-cy... | CC0 | https://www.printables.com/model/286996 | data_0049.tar |
264524 | Vase Mode Funnel | <p>A funnel i desinged to print in vase mode. A fellow 3D printer(er) got some Anycubic resin, but didn't have a good way to get it back into the bottle. Enter this simple funnel. Desinged and printed it in an afternoon and it works great! I'd love to see your prints and uses of this model, so if you print it please le... | [
"funnel",
"resin",
"anycubicresin"
] | Hobby & Makers > Tools | [
"264524/images/image_1_compressed.jpg",
"264524/images/image_2_compressed.jpg"
] | [
"264524/stls/Vase_Mode_Funnel.stl"
] | GPL2.0 | https://www.printables.com/model/264524 | data_0049.tar |
197160 | Vase Mode Hexagonal Flower Pot | <p>Hexagonal pot with hole + tray for vase mode</p>
Category: Outdoor & Garden | [
"thingiverse"
] | Household > Outdoor & Garden | [
"197160/images/image_1_compressed.jpg",
"197160/images/image_2_compressed.jpg",
"197160/images/image_3_compressed.jpg",
"197160/images/image_4_compressed.jpg"
] | [
"197160/stls/hexagon_pot.stl",
"197160/stls/hexagon_pot_tray.stl"
] | CC-BY | https://www.printables.com/model/197160 | data_0049.tar |
228289 | Vase mode Nalgene 1l to cup holder adapter | <p>This is an adapter to put a Nalgene bottle in a fairly standard car cupholder, Print should be in VASE mode for best results. I started out with a fairly generic design, then got intrigued by a YouTube video regarding using vase mode for faster prints, I decided to play with designing around that.</p><p>Origin... | [
"adapter",
"nalgene"
] | Hobby & Makers > Automotive | [
"228289/images/image_1_compressed.jpg"
] | [
"228289/stls/Vase_0.4mmNozzle_1l_Nalgene_to_cupholder.stl",
"228289/stls/Vase_0.6mmNozzle_1l_Nalgene_to_cupholder.stl"
] | CC-BY | https://www.printables.com/model/228289 | data_0049.tar |
281241 | Vase Mode Pen/Pencil Holder for Peg Board | <p>By using VASE MODE (single layer print, except the 3 layer floor), we save material/print time and still have a functional holder for Sharpies, pens, and pencils.</p><p>The separators are simply depressions in the wall that go 75% of the way from back to front. These separators are reasonably stiff.</p><p>The ... | [
"pegboardholder"
] | Hobby & Makers > Organizers | [
"281241/images/image_1_compressed.jpg",
"281241/images/image_2_compressed.jpg",
"281241/images/image_3_compressed.jpg",
"281241/images/image_4_compressed.jpg"
] | [
"281241/stls/185-1 Box.stl",
"281241/stls/185-3a pin bottom (1).stl",
"281241/stls/185-7 TOP (1).stl",
"281241/stls/PresFitCompoinent1.stl"
] | CC-BY | https://www.printables.com/model/281241 | data_0049.tar |
401781 | vase mode planter | 150mm tall planter | Download free 3D printable STL models | [
"planter"
] | Household > Outdoor & Garden | [
"401781/images/image_1_compressed.jpg",
"401781/images/image_2_compressed.jpg"
] | [
"401781/stls/pot vase mode.stl"
] | CC-BY | https://www.printables.com/model/401781 | data_0049.tar |
923824 | Vase mode self-watering planter | <p>100 mm height, 100 mm diameter.</p><p>Settings for both parts:<br><br>Spiral vase: on<br>0.3 mm layer height<br>1 mm wall width<br>4 bottom layers<br>i find concentric top surface infill better for waterproofing<br><br>I've used 0.6 mm nozzle for that one. Didn't test with 0.4 mm nozzle, it might not be ideal for in... | [] | Household > Home Decor | [
"923824/images/image_1_compressed.jpg",
"923824/images/image_2_compressed.jpg",
"923824/images/image_3_compressed.jpg",
"923824/images/image_4_compressed.jpg"
] | [
"923824/stls/Insert.stl",
"923824/stls/Planter.stl"
] | CC0 | https://www.printables.com/model/923824 | data_0049.tar |
101970 | Vase soil protector against toddlers | <p>I used the brilliant design from the rocket stands to create a new project.<br>I removed the indents and resized it.<br>You can easily put the together to protect the vases at home.<br>You should mix with and without the cones. This being done your kids won't be messing with the gardening soil.</p><p>Rafts:</p><p>No... | [
"vase",
"plant",
"toddler"
] | Household > Living Room | [
"101970/images/image_1_compressed.jpg",
"101970/images/image_2_compressed.jpg",
"101970/images/image_3_compressed.jpg"
] | [
"101970/stls/Plant_protect_Indent.stl",
"101970/stls/Plant_protect_NoIndent.stl"
] | CC-BY | https://www.printables.com/model/101970 | data_0049.tar |
292058 | Vase v6543 | [] | Household > Home Decor | [
"292058/images/image_1_compressed.jpg",
"292058/images/image_2_compressed.jpg"
] | [
"292058/stls/vase_v6543.stl"
] | CC-BY | https://www.printables.com/model/292058 | data_0049.tar | |
1215943 | vase with rectangular pattern | <h3>vase with rectangular pattern</h3> | [
"vase",
"pot",
"planter",
"vaso"
] | Household > Home Decor | [
"1215943/images/image_1_compressed.jpg",
"1215943/images/image_2_compressed.jpg"
] | [
"1215943/stls/2stl.stl",
"1215943/stls/ready to print.stl"
] | CC0 | https://www.printables.com/model/1215943 | data_0049.tar |
431967 | Vase-mode watering can | <p>UPDATE: I forgot that I had scaled 160% in my slicer. I have updated the models to be 60% bigger. </p><p> </p><p>I have gotten a few questions about the lack of a handle. This can is designed for vase mode, so it doesn't scale very well to large sizes (wall thickness is limited, so it can only hold a small... | [
"water",
"vasemode",
"plants",
"spiralizedvasemode"
] | Household > Outdoor & Garden | [
"431967/images/image_1_compressed.jpg",
"431967/images/image_2_compressed.jpg"
] | [
"431967/stls/advanced vase mode watering can.stl"
] | GPL2.0 | https://www.printables.com/model/431967 | data_0049.tar |
348303 | Vases for IKEA Haworthia Universe plant | <p>I printed this vase with the following settings:</p><p> </p><p>Nozzle size: 0,4 mm</p><p>Nozzle temperature: 200</p><p>Bed temperature: 60</p><p>Layer height: 0,2 mm</p><p>Print speed: 60 mm/s</p><p>Infill: 10%</p><p>Support: No</p><p>FIlament: Overture Rock PLA</p><p> </p><p>You should disable the followi... | [
"vase",
"ikea",
"plant",
"flowervase"
] | Household > Home Decor | [
"348303/images/image_1_compressed.jpg",
"348303/images/image_2_compressed.jpg",
"348303/images/image_3_compressed.jpg",
"348303/images/image_4_compressed.jpg"
] | [
"348303/stls/IKEA_Haworthia_Universe_Spiral_Vase.stl",
"348303/stls/IKEA_Haworthia_Universe_Spiral_Vase_2.stl",
"348303/stls/IKEA_Haworthia_Universe_Spiral_Vase_3.stl"
] | CC0 | https://www.printables.com/model/348303 | data_0049.tar |
1260968 | velikonoční králík | <p>Velikonoční dekorace,pro lepší detaily nutno tisknout 0,16,jednotlivé barvy jsou v různých výškách je tedy možno vytisknout vícebarevně na jakekoli tiskárně.</p> | [
"rabbit",
"easter",
"egg",
"velikonoce",
"vejce",
"kralik",
"zajic"
] | Art & Design > Wall-mounted | [
"1260968/images/image_1_compressed.jpg"
] | [
"1260968/stls/králik v2.stl"
] | CC0 | https://www.printables.com/model/1260968 | data_0049.tar |
440196 | Velociraptor with guitar | <p>velociraptor with acoustic guitar</p> | [
"dinosaur",
"guitar",
"velociraptor"
] | Toys & Games > Action Figures & Statues | [
"440196/images/image_1_compressed.jpg",
"440196/images/image_2_compressed.jpg",
"440196/images/image_3_compressed.jpg",
"440196/images/image_4_compressed.jpg",
"440196/images/image_5_compressed.jpg"
] | [
"440196/stls/Velociraptor_Guitar.stl"
] | CC0 | https://www.printables.com/model/440196 | data_0049.tar |
251483 | Velos | <p>As this is still a work in progress there is no solid build procedure. I can confirm that the craft flies as designed; however, the tuning process on a balanced tailsitter is proving more involved than what I expected. Once I am confident I have everything together I will post the software, configs, and most likely ... | [
"drone",
"ardupilot",
"ardupilotarducopter",
"bicopter"
] | Gadgets > Other Gadgets | [
"251483/images/image_1_compressed.jpg",
"251483/images/image_10_compressed.jpg",
"251483/images/image_11_compressed.jpg",
"251483/images/image_12_compressed.jpg",
"251483/images/image_13_compressed.jpg",
"251483/images/image_2_compressed.jpg",
"251483/images/image_3_compressed.jpg",
"251483/images/ima... | [
"251483/stls/Body_Left.stl",
"251483/stls/Body_Left_Reinforced.stl",
"251483/stls/Body_Right.stl",
"251483/stls/Body_Right_Reinforced.stl",
"251483/stls/Bottom Cover.stl",
"251483/stls/Inner Bearing Bracket.stl",
"251483/stls/Motor Mount.stl",
"251483/stls/Outer Bearing Bracket.stl",
"251483/stls/To... | CC-BY | https://www.printables.com/model/251483 | data_0049.tar |
944280 | Velux Skylight ventilation extension | <p>Created a remix with a smaller bolt (to fit my window) and 4 holes for ventilation setting</p> | [
"ventilation",
"velux",
"roofwindow"
] | Household > Other House Equipment | [
"944280/images/image_1_compressed.jpg",
"944280/images/image_2_compressed.jpg"
] | [
"944280/stls/Velux_Extension.stl"
] | CC-BY | https://www.printables.com/model/944280 | data_0049.tar |
496545 | Venom | <p>A bust of the Venom.</p> | [
"marvel",
"fanart",
"venom",
"bust",
"sculpture",
"thingiverse",
"sculptures"
] | Art & Design > Sculptures | [
"496545/images/image_1_compressed.jpg"
] | [
"496545/stls/Venom.stl"
] | CC-BY | https://www.printables.com/model/496545 | data_0049.tar |
1537004 | Vent Open/Close test gcode for Core One plus | <p>With the Prusa Core One+ (Plus), once you change the setting for vent management to "Auto", the printer can automatically open and close the vent as needed by the particular model being printed. I didn't see the gcode file posted anywhere online to test opening and closing the vent, so I thought I would share this (... | [] | 3D Printers > Prusa Parts & Upgrades | [
"1537004/images/image_1_compressed.jpg"
] | [
"1537004/stls/ignore_this_file_see_description.stl"
] | BSD | https://www.printables.com/model/1537004 | data_0049.tar |
672381 | Vent Ring Ender 3 v3 SE | [] | 3D Printers > Creality Parts & Upgrades | [
"672381/images/image_1_compressed.jpg"
] | [
"672381/stls/better vent ring.stl"
] | CC-BY | https://www.printables.com/model/672381 | data_0049.tar | |
845174 | Ventaglio - Folding fan | <p>There is a minimal version of this hand fan <a href="https://www.printables.com/model/1341683-ergonomic-hand-fan">https://www.printables.com/model/1341683-ergonomic-hand-fan</a></p><p>Ventaglio stampato in PLA altezza lauer 0.2 ugello 0.4</p><p>Fan printed in PLA, lauer height 0.2, nozzle 0.4</p> | [
"fan",
"folding",
"foldingfan",
"ventaglio"
] | Household > Other House Equipment | [
"845174/images/image_1_compressed.jpg",
"845174/images/image_2_compressed.jpg",
"845174/images/image_3_compressed.jpg",
"845174/images/image_4_compressed.jpg"
] | [
"845174/stls/Ventaglio V_2.1.stl"
] | GPL3.0 | https://www.printables.com/model/845174 | data_0049.tar |
1011574 | Ventilated case for CKCS U1E 65w PD board with 5.5x2.1 barrel jack | <p>Original model was very well designed, however I have reservations about having it completely enclosed with 65w output so I added vents to the top. Because of the added vents, its labels can no longer be on top so I also moved that to the bottom.</p> | [
"usbc",
"usbtypec",
"powerdeliverymodule"
] | Hobby & Makers > Electronics | [
"1011574/images/image_1_compressed.jpg",
"1011574/images/image_2_compressed.jpg"
] | [
"1011574/stls/remixed CKCS U1E 65w PD board with barrel jack - bottom.stl",
"1011574/stls/remixed CKCS U1E 65w PD board with barrel jack - top.stl"
] | CC0 | https://www.printables.com/model/1011574 | data_0049.tar |
280916 | Venturi Nozzle |
<p>This is a venturi nozzle for my air blow gun with a 1/2 inch threading.</p>
<h3>Print Settings</h3>
<p><strong>Printer:</strong></p>
<p>Ender 2</p>
<p class="detail-setting resolution"><strong>Resolution: </strong>
<div><p>0.2 mm</p></div>
<p><strong>Infill:</strong></p>
<p>20%</p>
<p><br/> <p class="detail-setti... | [
"nozzle",
"petg",
"dust",
"compressor",
"thingiverse",
"venturi",
"venturinozzle",
"aircompressor",
"airblowgun",
"compress"
] | Hobby & Makers > Tools | [
"280916/images/image_1_compressed.jpg",
"280916/images/image_2_compressed.jpg",
"280916/images/image_3_compressed.jpg"
] | [
"280916/stls/venturi_nozzle.stl"
] | CC-BY | https://www.printables.com/model/280916 | data_0049.tar |
846426 | VersaStack/TStak Front Plate | <p>This plate fits on the front of the Versastack drawer system. I cannot vouchsafe the fit on the Dewalt, but many people duplicate models for both platforms. Please let me know if it doesn't fit the TStak drawers.</p><p> </p><p>I've included the 3mf with manual color change code at the correct layers as we... | [
"dewalt",
"craftsman",
"versastack",
"tstack"
] | 3D Printers > Accessories | [
"846426/images/image_1_compressed.jpg",
"846426/images/image_2_compressed.jpg"
] | [
"846426/stls/Versastack Front Plate.stl"
] | CC-BY | https://www.printables.com/model/846426 | data_0049.tar |
997213 | Versatile HueForge Stand | <p>A versatile HueForge stand that accommodates various HueForge print sizes.</p><p>Print Settings:</p><ul><li>PETG (due to bending to shape)</li><li>15% Gyroid infill</li><li>1x skirt, no brim</li></ul><p>Once printed, bend the middle section until your HueForge print fits.</p><p> </p> | [
"hueforge"
] | Art & Design > Other Art & Designs | [
"997213/images/image_1_compressed.jpg",
"997213/images/image_2_compressed.jpg",
"997213/images/image_3_compressed.jpg",
"997213/images/image_4_compressed.jpg"
] | [
"997213/stls/HueForge Stand.stl"
] | CC-BY | https://www.printables.com/model/997213 | data_0049.tar |
551769 | Vertebrae of lumbar spine - Wirbelkörper lumbal | 3D model oh a human lumbar vetebrae | Download free 3D printable STL models | [] | Healthcare > Home Medical Tools | [
"551769/images/image_1_compressed.jpg",
"551769/images/image_2_compressed.jpg"
] | [
"551769/stls/LumbarVertebrae.stl"
] | CC-BY | https://www.printables.com/model/551769 | data_0049.tar |
135098 | Vertical GPU Riser Support for Corsair 5000 Series | <p>The title already explains a lot. ;-)</p><p>This is a GPU Riser PCB Support, which supports the slot and PCB of the riser cable.</p><p>Without the backed the PCB, were the PCI-E Slot is attached to, bent quite a bit. Especially when inserting the GPU and I feared it woudl break.</p><p>So I designed a mount that can ... | [
"computer",
"gpu",
"watercooling",
"corsair",
"computeraccessories",
"casemodding",
"pccasemodding",
"graphicscard",
"corsair5000",
"gpuriser",
"verticalgpu"
] | Gadgets > Computers | [
"135098/images/image_1_compressed.jpg",
"135098/images/image_2_compressed.jpg",
"135098/images/image_3_compressed.jpg",
"135098/images/image_4_compressed.jpg",
"135098/images/image_5_compressed.jpg"
] | [
"135098/stls/Corsair 5000 Series Vertical GPU Riser Support.stl"
] | CC-BY | https://www.printables.com/model/135098 | data_0049.tar |
1001770 | Vertical MMU3 Buffer Skadis mount/holder | <p>Print setting as shown in the picture to get the honeycomb-pattern in there.<br><br><br>You will need also:<br>4x M3 Nuts<br>4x M3x8mm Screw<br><br>Use the <br><br><strong>MMU3-Skadis-plateholder.3mf</strong><br><br><strong>from </strong><a href="https://www.printables.com/de/model/757781-hanging-mmu3-buffer-on... | [
"upgrade",
"prusa",
"multimaterial",
"multicolor",
"buffer",
"nosupport",
"easyprint",
"mk4",
"mmu3"
] | 3D Printers > Prusa Parts & Upgrades | [
"1001770/images/image_1_compressed.jpg",
"1001770/images/image_2_compressed.jpg",
"1001770/images/image_3_compressed.jpg",
"1001770/images/image_4_compressed.jpg",
"1001770/images/image_5_compressed.jpg"
] | [
"1001770/stls/MMU3 Buffer Holder.stl"
] | GPL2.0 | https://www.printables.com/model/1001770 | data_0049.tar |
260331 | Vertical Stand (16mm to 34mm) | <p>This is my take on vertical laptop stand (tested with my Lenovo Legion 5 as seen on photo). Available versions ragne from 16mm to 34mm in width. Feel free to comment if you need another size.</p><p>I suggest lining the innermost faces with felt, so choose 2-4mm wider than laptop. </p><p>The base should be flexi... | [
"stand",
"laptop",
"laptopstand",
"verticallaptopstand",
"vertical",
"verticalstand"
] | Gadgets > Computers | [
"260331/images/image_1_compressed.jpg",
"260331/images/image_2_compressed.jpg",
"260331/images/image_3_compressed.jpg",
"260331/images/image_4_compressed.jpg",
"260331/images/image_5_compressed.jpg"
] | [
"260331/stls/Vertical_Stand_16mm.stl",
"260331/stls/Vertical_Stand_18mm.stl",
"260331/stls/Vertical_Stand_20mm.stl",
"260331/stls/Vertical_Stand_22mm.stl",
"260331/stls/Vertical_Stand_24mm.stl",
"260331/stls/Vertical_Stand_26mm.stl",
"260331/stls/Vertical_Stand_28mm.stl",
"260331/stls/Vertical_Stand_3... | CC0 | https://www.printables.com/model/260331 | data_0049.tar |
147282 | Very simple customisable plectrum |
<p>Customized version of <a href="https://www.thingiverse.com/thing:3222967">https://www.thingiverse.com/thing:3222967</a></p>
<p>Created with Customizer! <a href="/apps/customizer/run">https://www.thingiverse.com/apps/customizer/run?thing_id=3222967</a></p>
<h3>Instructions</h3>
<p>Using the following options:</p>
... | [
"thingiverse",
"customized",
"plectrum",
"plektrum"
] | Hobby & Makers > Music | [
"147282/images/image_1_compressed.jpg"
] | [
"147282/stls/plectrum_20200423-60-5w122b.stl"
] | CC-BY | https://www.printables.com/model/147282 | data_0049.tar |
833958 | VESA adapter for tablets and portable monitors | <p>Here is a set of four arms you can adjust in various positions depending on monitor size and port placement. For the most stability try attaching the bottom arms first using both VESA mounting holes. Then adjust the top arms once the device is in place.</p><p>This adapter uses M4x12 bolts and nuts (8-12 depending on... | [
"mount",
"ipad",
"adapter",
"tablet",
"monitor",
"vesa"
] | Gadgets > Portable Devices | [
"833958/images/image_1_compressed.jpg",
"833958/images/image_2_compressed.jpg",
"833958/images/image_3_compressed.jpg"
] | [
"833958/stls/Arm (130mm).stl",
"833958/stls/Arm (90mm).stl",
"833958/stls/Hook-HeatSet(07mm gap).stl",
"833958/stls/Hook-HeatSet(12mm gap).stl",
"833958/stls/Hook-Nut(07mm gap).stl",
"833958/stls/Hook-Nut(12mm gap).stl"
] | CC0 | https://www.printables.com/model/833958 | data_0049.tar |
649472 | VESA Mount 100mm | <p>One part mounts to the monitor, the other to the wall. The monitor is then mounted to the wall using the french cleat designed into both holders.</p> | [
"vesa",
"vesa100",
"vesamount"
] | Household > Office | [
"649472/images/image_1_compressed.jpg",
"649472/images/image_2_compressed.jpg",
"649472/images/image_3_compressed.jpg",
"649472/images/image_4_compressed.jpg"
] | [
"649472/stls/VESA_Mount.stl",
"649472/stls/VESA_Wall Mount.stl"
] | GPL2.0 | https://www.printables.com/model/649472 | data_0049.tar |
392038 | VEX Scuff Controller V2 | <h4><strong>NOTICE</strong>: For all future updates to this model, see <a href="https://makerworld.com/en/models/459197">VEX Scuff Controller V2 by NoozAbooz - MakerWorld</a>.</h4><p> </p><p>The clamshells should be printed with at least 50% infill and 1mm wall thickness to prevent them from breaking easily. The p... | [
"controller",
"vex",
"v5",
"scuff"
] | Hobby & Makers > RC & Robotics | [
"392038/images/image_1_compressed.jpg",
"392038/images/image_2_compressed.jpg",
"392038/images/image_3_compressed.jpg",
"392038/images/image_4_compressed.jpg",
"392038/images/image_5_compressed.jpg",
"392038/images/image_6_compressed.jpg"
] | [
"392038/stls/BL Paddle.stl",
"392038/stls/Bottom_Clamshell.stl",
"392038/stls/BR Paddle.stl",
"392038/stls/TL trigger.stl",
"392038/stls/Top_Clamshell.stl",
"392038/stls/Top_Clamshell_Lanyard.stl",
"392038/stls/Top_Clamshell_Lanyard_REINFORCED.stl",
"392038/stls/TR trigger.stl"
] | CC-BY | https://www.printables.com/model/392038 | data_0049.tar |
510829 | VFA + Z-Wobble Test Tower - Customizable + 50, 75, 100, 150, 200, 250mm Presets | <p>Remix with increased height, more premade STLs, fixed mesh and better stand without a slope.</p><p>Use the 3mf file and just scale the Z height of the “Z_wobble_Test_Tower” object in Slicer.</p><p>Print in an grey-ish filament and not white, since that will hide the problems your printer might have.</p><p> </p>... | [
"test",
"testprint",
"zaxis",
"zwobble",
"wobble"
] | 3D Printers > Test Models | [
"510829/images/image_1_compressed.jpg",
"510829/images/image_2_compressed.jpg",
"510829/images/image_3_compressed.jpg"
] | [
"510829/stls/Teaser.stl",
"510829/stls/Z_wobble_Test_100mm.stl",
"510829/stls/Z_wobble_Test_150mm.stl",
"510829/stls/Z_wobble_Test_200mm.stl",
"510829/stls/Z_wobble_Test_250mm.stl",
"510829/stls/Z_Wobble_Test_50mm.stl",
"510829/stls/Z_Wobble_Test_75mm.stl",
"510829/stls/Z_wobble_Test_Tower.stl"
] | CC-BY | https://www.printables.com/model/510829 | data_0049.tar |
892836 | Vibration dampers for Kobra 2 Neo | <p>Vibration dampers of the legs for kobra 2 neo. When printing, the printer shakes everything around a lot. These dampers reduce the shaking around. Rubber round spacers on the bottom prevent sliding on the table and dampen vibration even more. 4 legs are quite enough, but 8 can be used for greater rigidity. </p>... | [
"pla",
"vibration",
"vibrationdampers",
"dampers",
"kobra2neo"
] | 3D Printers > Anycubic Parts & Upgrades | [
"892836/images/image_1_compressed.jpg"
] | [
"892836/stls/antiV2.stl"
] | CC-BY | https://www.printables.com/model/892836 | data_0049.tar |
285392 | VICSEED/Amazon style Phone Mount Nut for Rotation ball thing | <p>If this is being used in a car you should choose a filament that will not soften in the heat. PETG and ASA/ABS recommended.</p><p><a href="https://cad.onshape.com/documents/43b94338e97234eb4246af76/w/5f9d97bc324889ae87d8eb6e/e/a56f99afbbc3c16f3a1d27d4">OnShape File is at the linked location</a>, Feel free to modify.... | [
"nut",
"mount",
"ball",
"amazon",
"car",
"phone",
"bolt",
"vicseed",
"vanva"
] | Hobby & Makers > Automotive | [
"285392/images/image_1_compressed.jpg",
"285392/images/image_2_compressed.jpg"
] | [
"285392/stls/Amazon_PhoneMountNut.stl"
] | CC0 | https://www.printables.com/model/285392 | data_0049.tar |
200529 | Victorian Country House | <p>Two stores Victorian Country House. I modeled the house as the main project for this amazing course: <a href="https://www.domestika.org/es/courses/1544-diseno-e-impresion-3d-de-maquetas-arquitectonicas/course">https://www.domestika.org/es/courses/1544-diseno-e-impresion-3d-de-maquetas-arquitectonicas/course</a><br><... | [
"architecture",
"dollhouse",
"house",
"victorian",
"blueprints"
] | World & Scans > Architecture & Urbanism | [
"200529/images/image_1_compressed.jpg",
"200529/images/image_2_compressed.jpg",
"200529/images/image_3_compressed.jpg",
"200529/images/image_4_compressed.jpg",
"200529/images/image_5_compressed.jpg"
] | [
"200529/stls/big_ceil.stl",
"200529/stls/celil_1.stl",
"200529/stls/door.stl",
"200529/stls/door_interior.stl",
"200529/stls/fence_left.stl",
"200529/stls/fence_right.stl",
"200529/stls/floor_one.stl",
"200529/stls/floor_two.stl",
"200529/stls/stairs.stl",
"200529/stls/Wane_1.stl",
"200529/stls/... | CC0 | https://www.printables.com/model/200529 | data_0049.tar |
528578 | Victorian Goblet face illusion | <p>I saw a similar thing to this in a 3D printing forum but as the designer did not answer any requests to share the STL file, I thought that I would have a go myself.</p>
<p>This is a replica of a Victorian goblet with an external profile which resembles that of a face - and as it is symmetrical, it is the same face o... | [
"thingiverse"
] | Art & Design > Other Art & Designs | [
"528578/images/image_1_compressed.jpg",
"528578/images/image_2_compressed.jpg",
"528578/images/image_3_compressed.jpg"
] | [
"528578/stls/Vase.stl"
] | CC-BY | https://www.printables.com/model/528578 | data_0049.tar |
934480 | Victorinox 91mm scale with pen, needle and toothpick cutout | <p>This model should be printed with the outside of the scales on the printbed. This is the way it is already oriented. The model named “Scale” doesn't need any supports and can just be printed as is. The model named “ScaleWithCutout” needs to be printed with supports for the cutout at the toothpick opening. This cutou... | [
"pen",
"knife",
"swiss",
"toothpick",
"knifescales",
"pocketknife",
"scales",
"spartan",
"victorinox",
"swissarmyknife",
"toothpickholder"
] | Hobby & Makers > Tools | [
"934480/images/image_1_compressed.jpg"
] | [
"934480/stls/Scale.stl",
"934480/stls/ScaleWithCutout.stl"
] | CC0 | https://www.printables.com/model/934480 | data_0049.tar |
556014 | Viking Compass Symbol | <p>Viking Compass Symbol</p> | [] | Art & Design > Other Art & Designs | [
"556014/images/image_1_compressed.jpg",
"556014/images/image_2_compressed.jpg",
"556014/images/image_3_compressed.jpg"
] | [
"556014/stls/Viking Compass.stl"
] | CC0 | https://www.printables.com/model/556014 | data_0049.tar |
534124 | Viking Helmet Remix | <p>Slight variation on the original model. Hollowed out a little more and sized up 102% to allow for easier fit when padding is added inside the helmet. Re-uploaded as a single STL file where the horns are printed inside the helmet cavity.<br><br>Same print parameters as the original. Tested in Polymaker Poly Lite PLA.... | [
"costume",
"helmet",
"armor",
"viking",
"vikings"
] | Costumes & Accessories > Cosplay & Costumes in general | [
"534124/images/image_1_compressed.jpg"
] | [
"534124/stls/Viking Helmet (horns inside).stl"
] | CC0 | https://www.printables.com/model/534124 | data_0049.tar |
43544 | Vilmar IKEA - Connecting piece, replacement | <p>A replacement connecting piece for Ikea's Vilmar chair</p>
<p>12 oct 2018 : design modified for easiest print, avoiding overhang</p>
<h3>Print instructions</h3><h3>Category: Replacement Parts Summary</h3>
<p>A replacement connecting piece for Ikea's Vilmar chair</p>
<p>12 oct 2018 : design modified for easiest print... | [
"thingiverse"
] | Household > Living Room | [
"43544/images/image_1_compressed.jpg",
"43544/images/image_2_compressed.jpg",
"43544/images/image_3_compressed.jpg"
] | [
"43544/stls/liaisonchaise.stl"
] | CC-BY | https://www.printables.com/model/43544 | data_0049.tar |
689618 | Vintage Lincoln Log Double Wide Piece | <p><strong>Title:</strong> Vintage Lincoln Log Double Wide Piece - 3D Printable Model</p><p>As a 3D modeling enthusiast with fond memories of various vintage toys, I'm thrilled to present my series of 3D printable Lincoln Log models. Growing up, Lincoln Logs were a staple of creative play, but the absolutely ludicrous ... | [
"toy",
"lincoln",
"toysforkids",
"vintagetoy",
"lincolnlogs"
] | Toys & Games > Building Toys | [
"689618/images/image_1_compressed.jpg",
"689618/images/image_2_compressed.jpg",
"689618/images/image_3_compressed.jpg",
"689618/images/image_4_compressed.jpg"
] | [
"689618/stls/Double.stl"
] | CC0 | https://www.printables.com/model/689618 | data_0049.tar |
1321760 | Vintage Rocket (glow in the dark) | <p>Glow in the dark rocket relief printed in white PLA (base/background layers) and then glow in the dark PLA filament for the relief portion.</p> | [
"rocket",
"children",
"kids",
"glow",
"glowinthedark",
"wallart",
"bedroom"
] | Art & Design > Wall-mounted | [
"1321760/images/image_1_compressed.jpg",
"1321760/images/image_2_compressed.jpg"
] | [
"1321760/stls/Vintage rocket .stl"
] | CC-BY | https://www.printables.com/model/1321760 | data_0049.tar |
751358 | Vinyl Record Dividers with MESH body (Thinner and Larger Notch) | <p>Simple remix. I thinned them out and added a bit to the notch. I needed to extend the tab because I also use the following spacers in my Kallax: <a href="https://www.printables.com/model/469429-ikea-kallax-spacer-vinyl-with-protective-film">https://www.printables.com/model/469429-ikea-kallax-spacer-vinyl-with-protec... | [
"vinylrecord",
"kallax"
] | Hobby & Makers > Organizers | [
"751358/images/image_1_compressed.jpg",
"751358/images/image_2_compressed.jpg"
] | [
"751358/stls/A-C_Thin_LargerTabs_.stl",
"751358/stls/D-F_Thin_LargerTabs_.stl",
"751358/stls/G-I_Thin_LargerTabs_.stl",
"751358/stls/J-L_Thin_LargerTabs_.stl",
"751358/stls/M-O_Thin_LargerTabs_.stl",
"751358/stls/P-R_Thin_LargerTabs_.stl",
"751358/stls/S-U_Thin_LargerTabs_.stl",
"751358/stls/V-X_Thin_... | CC-BY | https://www.printables.com/model/751358 | data_0049.tar |
42660 | Vinyl Record Wall Mount (Now Playing) | <p>Simple wall mount for the record you are currently listening to, or just want to display.<br/>
Designed to fit command strips for easy hanging and removal.</p>
<p>Happy listening!</p>
<h3>Print instructions</h3><p>==============</p>
<p><strong>Resolution:</strong> 0.2mm</p>
<p><strong>Infill:</strong> 10-20%</p>
<p... | [
"music",
"wallmount",
"record",
"turntable",
"thingiverse",
"vinyl",
"vinylrecord",
"sleeve",
"wallhanger",
"vinylholder"
] | Hobby & Makers > Music | [
"42660/images/image_1_compressed.jpg",
"42660/images/image_2_compressed.jpg",
"42660/images/image_3_compressed.jpg",
"42660/images/image_4_compressed.jpg",
"42660/images/image_5_compressed.jpg",
"42660/images/image_6_compressed.jpg",
"42660/images/image_7_compressed.jpg",
"42660/images/image_8_compres... | [
"42660/stls/vinylholder_v2.stl"
] | CC-BY | https://www.printables.com/model/42660 | data_0049.tar |
364142 | Vinyl Record Wall Mount (thumbtack) | <p>Since I don't have access to Command Strips I decided to remix HighFiveGhost's wall mount to be able to fit thumbtacks through to mount it.</p><p>I don't really have any idea how much weight they can hold. I've had mine up for more than 4 months holding either double LPs, they don't seem to have budged.</p><p>The pr... | [
"wallmount",
"record",
"vinyl",
"vinylholder",
"walldisplay",
"vinylwalldisplay",
"recordholder",
"recordwalldisplay",
"recorddisplay",
"vinyldisplay"
] | Hobby & Makers > Music | [
"364142/images/image_1_compressed.jpg",
"364142/images/image_2_compressed.jpg"
] | [
"364142/stls/vinylholder_modded.stl"
] | CC-BY | https://www.printables.com/model/364142 | data_0049.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.