model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
142144 | 8BitDo Grip (splitted) |
<p>I remixed "8Bitdo SF30 (SN30) Pro Grip 2.0 by DavidSL448" to be able to print it without supports (except for the "arc")</p>
<p>Also the rear "arc" can be printed sideways and thus much stronger.</p>
<p>You'll need to glue the 4 parts, I used gel super glue (Super Gel by Pattex)</p>
<h3>Print Settings</h3>
<p><st... | [
"grip",
"switch",
"nintendoswitch",
"thingiverse",
"gamepad",
"8bitdo"
] | Gadgets > Other Gadgets | [
"142144/images/image_1_compressed.jpg",
"142144/images/image_2_compressed.jpg",
"142144/images/image_3_compressed.jpg",
"142144/images/image_4_compressed.jpg"
] | [
"142144/stls/split_arc.stl",
"142144/stls/split_bottom_grips.stl",
"142144/stls/split_bottom_top.stl"
] | CC-BY | https://www.printables.com/model/142144 | data_0001.tar |
1303788 | 8BitDo SN30 Pro Snap-Fit Hard Case | <p>I recently bought another one of these controllers since the hall effect stick update and am obsessed with the SNES controller form factor. I even swapped in the purple buttons for extra nostalgia. </p><p>To protect it during travel/in a bag, I designed this minimalist 2-piece snap fit hard case. Allows for cha... | [] | Gadgets > Video Games | [
"1303788/images/image_1_compressed.jpg",
"1303788/images/image_2_compressed.jpg",
"1303788/images/image_3_compressed.jpg",
"1303788/images/image_4_compressed.jpg"
] | [
"1303788/stls/CASE BASE.stl",
"1303788/stls/CASE LID.stl"
] | CC-BY | https://www.printables.com/model/1303788 | data_0001.tar |
1147008 | 8bitdo Ultimate C Controller Stands | <figure class="image image_resized image-style-align-center" data-width="25%" style="width: 25%; --image-width: 25%;"><img class="editor-image-resize" src="https://media.printables.com/media/prints/1147008/rich_content/9c65a65c-cf28-44ad-9c1b-e08e3ee7e466/bmc-yellow-button-941f96a1.png#%7B%22uuid%22%3A%22ff09c3c6-e992-... | [
"stand",
"videogame",
"support",
"mount",
"base",
"controller",
"supports",
"controllers",
"stands",
"8bitdo",
"controllerstand"
] | Gadgets > Video Games | [
"1147008/images/image_1_compressed.jpg",
"1147008/images/image_2_compressed.jpg"
] | [
"1147008/stls/8bitdoUltimate_Original_Base.stl",
"1147008/stls/8bitdoUltimate_Stand_Large_Base.stl"
] | CC-BY | https://www.printables.com/model/1147008 | data_0001.tar |
1373740 | 8BitDo Ultimate C2 Controller Invisible Stand | <p>Minimal and nearly invisible controller stand adapted for the 8BitDo Ultimate C2.<br>Remix of the <a href="https://www.printables.com/model/1138617-xbox-invisible-stand-holder-controller">Xbox invisible stand</a> by <a href="https://www.printables.com/@LucasRomero_2485768">Lucas Romero</a>.</p> | [
"holder",
"stand",
"mount",
"controller",
"ultimate",
"8bitdo",
"controllermount",
"controllerstand",
"c2",
"controllerholder"
] | Gadgets > Video Games | [
"1373740/images/image_1_compressed.jpg"
] | [
"1373740/stls/8bitdo-ultimate-c2-controller-invisible-stand-holder.stl"
] | CC0 | https://www.printables.com/model/1373740 | data_0001.tar |
1202862 | 8BitDo Ultimate dongle holder on joysticks | <p>Attaches to joysticks to store the dongle when you travel with the controller.</p><p>Provides some level of protection for the joysticks as a bonus.</p><p>Yes the stand has a slot for the dongle, but are you really using it?</p><h4>Updates</h4><p>2025-11-30 made one for the <a href="https://www.printables.com/model/... | [
"gaming",
"playstation",
"joystick",
"controller",
"dongle",
"nosupport",
"xbox",
"xboxcontroller",
"carry"
] | Gadgets > Video Games | [
"1202862/images/image_1_compressed.jpg",
"1202862/images/image_2_compressed.jpg",
"1202862/images/image_3_compressed.jpg",
"1202862/images/image_4_compressed.jpg"
] | [
"1202862/stls/demo.stl"
] | CC-BY | https://www.printables.com/model/1202862 | data_0001.tar |
1767912 | 8colors + 4 colors INDX Benchy | <p>Author: CreativeTools</p><p>3DBenchy is a 3D model specifically designed for testing and benchmarking 3D printers. It is a small recognizable object that you can download for free, make and share.</p><p><a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="http://www.3dbenchy.com/">http://w... | [
"boat",
"multicolor",
"test",
"benchy",
"testmodel",
"8color",
"4colors",
"indx"
] | 3D Printers > Test Models | [
"1767912/images/image_1_compressed.jpg",
"1767912/images/image_2_compressed.jpg",
"1767912/images/image_3_compressed.jpg",
"1767912/images/image_4_compressed.jpg"
] | [
"1767912/stls/Benchy_4T.stl",
"1767912/stls/Benchy_8T.stl"
] | CC0 | https://www.printables.com/model/1767912 | data_0001.tar |
471131 | 8mm Film Reel | <p>I picked up an 8mm film projector once and it came with one spool and no film, i modeled this off the existing spool so the thing would look complete, hope you all enjoy</p>
Category: Camera | [
"spool",
"film",
"thingiverse",
"8mm",
"filmphotography",
"8mmfilm",
"8mmfilmprojector"
] | Gadgets > Photo & Video | [
"471131/images/image_1_compressed.jpg",
"471131/images/image_2_compressed.jpg",
"471131/images/image_3_compressed.jpg"
] | [
"471131/stls/8mmSpool.stl",
"471131/stls/8mmSpoolCenter.stl"
] | CC-BY | https://www.printables.com/model/471131 | data_0001.tar |
139020 | 8mm Spark plug wire holder | <p>built these to hold spark plug wires on a old car. They will work on any 8mm wire though. </p><p>In sample phones I used Petg but ASA or ABS would work better as it is better in high temps. I did end up using supports and set the parts at 100% infill.</p> | [
"holder",
"spark",
"wire",
"sparkplug",
"plugwire"
] | Hobby & Makers > Automotive | [
"139020/images/image_1_compressed.jpg",
"139020/images/image_2_compressed.jpg"
] | [
"139020/stls/spark_plug_wire_holders_dual.stl",
"139020/stls/spark_plug_wire_holders_quad.stl"
] | CC0 | https://www.printables.com/model/139020 | data_0001.tar |
299531 | 8" Newtonian Telescope "Leavitt" | <p><strong>Update 9/26/23 </strong>- v2 is published! This includes updates to most major components. Instructions have been updated wherever any assembly would differ, though some of the instructional images still show parts from v1 if the assembly steps are identical.</p><p><a href="https://sites.google.com/view/203-... | [
"science",
"telescope",
"astronomy",
"planets",
"reflector"
] | Learning > Physics & Astronomy | [
"299531/images/image_1_compressed.jpg",
"299531/images/image_2_compressed.jpg",
"299531/images/image_3_compressed.jpg",
"299531/images/image_4_compressed.jpg"
] | [
"299531/stls/Leavitt - 1.25 inch eyepiece adapter.stl",
"299531/stls/Leavitt - Alt bearing for Dob mount (x2).stl",
"299531/stls/Leavitt - Alt stand for Dob mount (x2).stl",
"299531/stls/Leavitt - Azimuth bearing for Dob mount.stl",
"299531/stls/Leavitt - Cell.stl",
"299531/stls/Leavitt - Dob tube segment... | CC-BY | https://www.printables.com/model/299531 | data_0001.tar |
85192 | 9 slot buffer | <p>Everything is the same as the original just more slots</p> | [
"buffer",
"mmu2s"
] | 3D Printers > Other Printer Parts & Upgrades | [
"85192/images/image_1_compressed.jpg"
] | [
"85192/stls/9_slot_buffer.stl"
] | CC0 | https://www.printables.com/model/85192 | data_0001.tar |
82832 | 90 Degree Bracket for 2020 Extrusion for Ender-5, Pro, Plus |
<p>This is a remix of:<br/>
<a href="https://www.thingiverse.com/thing:3644062">https://www.thingiverse.com/thing:3644062</a></p>
<p>I liked the design of the original bracket, but wanted to try and make it a little smaller. This design is about 50% scale of the larger bracket. Included is both a 2 bolt and 4 bolt ver... | [
"creality",
"ender",
"bracket",
"2020",
"corner",
"thingiverse",
"2020extrusion",
"cornerbracket",
"90degree",
"ender5",
"ender5plus",
"ender5pro"
] | 3D Printers > Creality Parts & Upgrades | [
"82832/images/image_1_compressed.jpg",
"82832/images/image_2_compressed.jpg",
"82832/images/image_3_compressed.jpg",
"82832/images/image_4_compressed.jpg"
] | [
"82832/stls/90_Degree_Brack_for_2020_Extrusion_Small_2bolt.stl",
"82832/stls/90_Degree_Brack_for_2020_Extrusion_Small_4bolt.stl"
] | CC-BY | https://www.printables.com/model/82832 | data_0001.tar |
587136 | 90 degree filament roller guide for Prusa MK4 | <p>I made this to pull filament from a dryer I keep next to my MK4. The clip is rotated 180 degrees to help clear the extruder when it gets to the top. The extruder cable will hit the bottom of the clip at the very top, but clears at 2mm from the top.</p><p> </p><p>Required parts:</p><ul><li>608 bearing</li><li>M3... | [
"prusa",
"drybox",
"filament",
"guide",
"bearing",
"roller",
"dryer",
"filamentguide",
"608bearing",
"mk4",
"prusamk4",
"mk4upgrade"
] | 3D Printers > Prusa Parts & Upgrades | [
"587136/images/image_1_compressed.jpg",
"587136/images/image_2_compressed.jpg",
"587136/images/image_3_compressed.jpg",
"587136/images/image_4_compressed.jpg",
"587136/images/image_5_compressed.jpg"
] | [
"587136/stls/frame_left_load.stl",
"587136/stls/frame_right_load.stl",
"587136/stls/pulley.stl",
"587136/stls/spacer.stl",
"587136/stls/spacers.stl"
] | GPL2.0 | https://www.printables.com/model/587136 | data_0001.tar |
28063 | 90 Degree Right-Angle Bracket for household repairs (#6 screws, customizable) | <p>While you are staying safe at home, you might have something break that you'd typically go buy a replacement or perhaps a repair bracket for. (For example, the snack drawer's increased contents and enthusiastic children might result in some damage :D ) You can print this file out and use it to perform a repair witho... | [
"shelf",
"bracket",
"screw",
"repair",
"drawer"
] | Household > Other House Equipment | [
"28063/images/image_1_compressed.jpg",
"28063/images/image_2_compressed.jpg",
"28063/images/image_3_compressed.jpg",
"28063/images/image_4_compressed.jpg",
"28063/images/image_5_compressed.jpg",
"28063/images/image_6_compressed.jpg",
"28063/images/image_7_compressed.jpg",
"28063/images/image_8_compres... | [
"28063/stls/bracket.stl"
] | CC-BY | https://www.printables.com/model/28063 | data_0001.tar |
1267559 | 90 Degrees Bridge Ramp - Brio Compatible | <p>A 90-degree bridge ramp for wooden train track that allows train cars to transition smoothly between different elevation levels while making a quarter-turn (90-degree) curve.</p><ul><li>The curved design makes this piece ideal for smaller play areas.</li><li>The portal arcs designed with a maximum angle of 70 degree... | [
"toy",
"toys",
"supportless",
"children",
"kids",
"rail",
"train",
"brio",
"nosupport",
"nosupports",
"briotraintrack",
"briocompatible",
"woodtraintrack"
] | Toys & Games > Building Toys | [
"1267559/images/image_1_compressed.jpg",
"1267559/images/image_2_compressed.jpg",
"1267559/images/image_3_compressed.jpg",
"1267559/images/image_4_compressed.jpg",
"1267559/images/image_5_compressed.jpg"
] | [
"1267559/stls/Bridge_Ramp_90_Left.stl",
"1267559/stls/Bridge_Ramp_90_Right.stl"
] | CC-BY | https://www.printables.com/model/1267559 | data_0001.tar |
103344 | 90 degrees heatbed cable cover for the MK3 | <p>Hello friends!</p><p>Here is my version of the 90 degree heatbed cable cover for the original Prusa i3 MK3. I recently received it (and its wonderful), and I put it inside my IKEA Lack case (I previously made thanks to Prusa who published a very good tutorial on how to build it (<a href="https://www.printables.com/c... | [
"prusa",
"prusai3",
"cable",
"prusai3mk3",
"heatedbed",
"cablemanagement"
] | 3D Printers > Prusa Parts & Upgrades | [
"103344/images/image_1_compressed.jpg",
"103344/images/image_2_compressed.jpg"
] | [
"103344/stls/HeatBed_CableMask_Bot.stl",
"103344/stls/HeatBed_CableMask_Top.stl"
] | CC-BY | https://www.printables.com/model/103344 | data_0001.tar |
55520 | 91mm Swiss Army Knife Replacement Scales | <p>These are replacement scales for 91mm Victorinox Swiss Army Knives. You can edit the .STEP files to add your own custom text or logo. Adding a filament swap at the first layer of the logo/text really makes it stand out.</p><p>The holes are designed to be interference fit with the knife's rivets, so they will likely ... | [
"knife",
"swiss",
"pocket",
"edc",
"army",
"scales",
"victorinox"
] | Hobby & Makers > Tools | [
"55520/images/image_1_compressed.jpg",
"55520/images/image_2_compressed.jpg",
"55520/images/image_3_compressed.jpg",
"55520/images/image_4_compressed.jpg"
] | [
"55520/stls/a_side_blank.stl",
"55520/stls/b_side.stl"
] | CC0 | https://www.printables.com/model/55520 | data_0001.tar |
326240 | 91mm Victorinox swiss army knife scale with toothpick/tweezers | [
"scale",
"victorinox",
"swissarmyknife"
] | Hobby & Makers > Tools | [
"326240/images/image_1_compressed.jpg",
"326240/images/image_2_compressed.jpg",
"326240/images/image_3_compressed.jpg"
] | [] | CC0 | https://www.printables.com/model/326240 | data_0001.tar | |
52466 | 96 Bit Storage Frog Box | <p>Remix of <a href="https://www.thingiverse.com/thing:4094861">https://www.thingiverse.com/thing:4094861</a> with the latches from <a href="https://www.thingiverse.com/thing:4640334">https://www.thingiverse.com/thing:4640334</a></p>
<h3>Print instructions</h3><p>Printed with the following filaments:</p>
<p><a href="ht... | [] | Hobby & Makers > Tools | [
"52466/images/image_1_compressed.jpg",
"52466/images/image_2_compressed.jpg"
] | [
"52466/stls/bottom.stl",
"52466/stls/hinge.stl",
"52466/stls/holder.stl",
"52466/stls/lever.stl",
"52466/stls/lid.stl",
"52466/stls/roller.stl"
] | CC-BY | https://www.printables.com/model/52466 | data_0001.tar |
217479 | 9MM Ammo Case | Ammo case that can hold 50 9mm rounds. | Download free 3D printable STL models | [
"container",
"ammo",
"storage",
"ammobox"
] | Sports & Outdoor > Outdoor Sports | [
"217479/images/image_1_compressed.jpg"
] | [
"217479/stls/9MM Body.stl",
"217479/stls/9MM Lid.stl"
] | CC-BY | https://www.printables.com/model/217479 | data_0001.tar |
730692 | 9mm Bullet | 9mm Bullet replica | Download free 3D printable STL models | [
"gun",
"bullet",
"bullets"
] | Toys & Games > Other Toys & Games | [
"730692/images/image_1_compressed.jpg"
] | [
"730692/stls/9mm Bullet.stl"
] | CC0 | https://www.printables.com/model/730692 | data_0001.tar |
952295 | 9mm dummy round | <p>9mm dummy round the best durability print 100% infill</p> | [] | Tabletop Miniatures > Props & Terrains | [
"952295/images/image_1_compressed.jpg"
] | [
"952295/stls/9mm dummy round.stl"
] | CC0 | https://www.printables.com/model/952295 | data_0001.tar |
212594 | 9mm Luger, 9x19mm | 9mm Luger, 9x19 Nato | Download free 3D printable STL models | [
"cartridge",
"ammo",
"9mm",
"bullet",
"luger"
] | Sports & Outdoor > Other Sports | [
"212594/images/image_1_compressed.jpg",
"212594/images/image_2_compressed.jpg"
] | [
"212594/stls/9mm luger_9x19mm.stl"
] | CC-BY | https://www.printables.com/model/212594 | data_0001.tar |
1032011 | 9V battery cap | <p>A battery terminal protective cap with the features I missed on other models I found:</p><ul><li>“snap” profile to engage with the positive terminal</li><li>ridge on the nub for the negative terminal to engage with it</li><li>terminals completely enclosed</li><li>relief on the sides to engage the thumb or the nail f... | [
"cap",
"cover",
"protector",
"9v",
"6lr61",
"blockbatterie",
"mn1604",
"1604aup",
"6lp3146",
"6lf22"
] | Hobby & Makers > Electronics | [
"1032011/images/image_1_compressed.jpg"
] | [
"1032011/stls/9V_battery_cap-cap.stl"
] | CC0 | https://www.printables.com/model/1032011 | data_0001.tar |
877416 | 9V Battery Cover | <p>9V Battery Cover</p> | [
"battery",
"arduino",
"cover",
"electronics",
"9",
"v",
"electronic",
"voltage",
"voltmeter",
"tapa",
"electronica",
"bateria",
"pila"
] | Hobby & Makers > Electronics | [
"877416/images/image_1_compressed.jpg",
"877416/images/image_2_compressed.jpg"
] | [
"877416/stls/9V Battery Cover.stl"
] | CC-BY | https://www.printables.com/model/877416 | data_0001.tar |
244915 | 9v Battery Dispenser | <p>I needed a way to not only store my batteries but also make sure that they all get rotated through service. I was having one or two batteries at the bottom of my storage case that would not get used and re-charged. This solves the problem for me. I also made a AA version and a AAA version.</p>
<h3>Print Settings</h3... | [
"storage",
"battery",
"dispenser",
"thingiverse",
"9volt"
] | Household > Office | [
"244915/images/image_1_compressed.jpg",
"244915/images/image_2_compressed.jpg",
"244915/images/image_3_compressed.jpg"
] | [
"244915/stls/battery_dispenser_9v_left.stl",
"244915/stls/battery_dispenser_9v_right.stl"
] | CC-BY | https://www.printables.com/model/244915 | data_0001.tar |
101908 | 9x19mm Parabellum |
<p>The 9x19mm Parabellum is a cartridge that was designed by Georg Luger for DWM's Luger semi-automatic pistol.</p>
Category: Sport & Outdoors
| [
"thingiverse",
"9mm",
"luger",
"9x19",
"parabellum"
] | Sports & Outdoor > Other Sports | [
"101908/images/image_1_compressed.jpg"
] | [
"101908/stls/9mm_Parabellum.stl"
] | CC-BY | https://www.printables.com/model/101908 | data_0001.tar |
402797 | A bee for your honeycomb storage wall (HSW)! | <p>A simple remix of the HSW insert, but i think it looks adorable. No Honeycomb storage wall should be without one! No MMU needed, just a few simple manual filament swaps (explained below).</p><p>I mounted the design from <a href="https://www.thingiverse.com/thing:3488699">https://www.thingiverse.com/thing:3488699</a>... | [
"bee",
"honeycomb",
"hcw",
"honeycombstoragewall",
"hsw"
] | Art & Design > Wall-mounted | [
"402797/images/image_1_compressed.jpg",
"402797/images/image_2_compressed.jpg",
"402797/images/image_3_compressed.jpg"
] | [
"402797/stls/HCW_Multicolor_bee_1x.stl",
"402797/stls/HCW_Multicolor_bee_5x.stl"
] | CC-BY | https://www.printables.com/model/402797 | data_0001.tar |
394402 | A Better 5-Wheel Filament Buffer | <p>This is an improvement on the excellent <a href="https://www.printables.com/model/4670-5-wheel-buffer-for-mmu2">5-Wheel Buffer for MMU2</a> design. The most significant improvements:</p><ul><li>Uses M10 PTFE tube quick fit connectors that prevent the tubes from sliding out.</li><li>Narrower fit between wheel and arm... | [
"filamentbuffer",
"prusafilamentbuffer",
"mmu2sbuffer"
] | 3D Printers > Other Printer Parts & Upgrades | [
"394402/images/image_1_compressed.jpg",
"394402/images/image_2_compressed.jpg",
"394402/images/image_3_compressed.jpg",
"394402/images/image_4_compressed.jpg",
"394402/images/image_5_compressed.jpg",
"394402/images/image_6_compressed.jpg",
"394402/images/image_7_compressed.jpg"
] | [
"394402/stls/Buffer Wheel (improved).stl",
"394402/stls/Buffer Wheel (original).stl",
"394402/stls/Combined Base.stl",
"394402/stls/Individual Base.stl",
"394402/stls/Verticals.stl"
] | CC-BY | https://www.printables.com/model/394402 | data_0001.tar |
83562 | A Better PTFE Bowden Tube Cutter | <p>*update: added STL for PC4-M01/PC4-M10 fitting</p>
<p>Here is my design of a PTFE Bowden tube cutting jig that actually works.</p>
<p>With Bowden printers such as my Ender 3 v2 and my Voxelab Aquila, it's critical to get the Bowden tube seated against the stock extruder's nozzle as flat and as tight as you can. By... | [
"thingiverse"
] | 3D Printers > Accessories | [
"83562/images/image_1_compressed.jpg",
"83562/images/image_2_compressed.jpg",
"83562/images/image_3_compressed.jpg",
"83562/images/image_4_compressed.jpg",
"83562/images/image_5_compressed.jpg",
"83562/images/image_6_compressed.jpg",
"83562/images/image_7_compressed.jpg",
"83562/images/image_8_compres... | [
"83562/stls/A_Better_PTFE_Bowden_Tube_Cutter.stl",
"83562/stls/PTFE_cutter_PC4-M01.stl"
] | CC-BY | https://www.printables.com/model/83562 | data_0001.tar |
355903 | A Bigger Honeycomb Box for Honeycomb Wall | Removed the Bottom tab, because of extra support needed | [] | Hobby & Makers > Organizers | [
"355903/images/image_1_compressed.jpg"
] | [
"355903/stls/HoneyCombBox.stl",
"355903/stls/HoneyCombBoxNoTabs.stl",
"355903/stls/HoneyCombBoxWithTabs.stl"
] | CC-BY | https://www.printables.com/model/355903 | data_0001.tar |
170103 | A Christmas Story Leg Lamp - Biggerized |
<p>A Christmas Story Leg Lamp - Biggerized</p>
<p>by RebelTaz</p>
<p>I found out this past week that my mother had always loved the movie "<em>A Christmas Story</em>". I guess there's no accounting for taste, but... I digress. I thought it would be nice to make her a leg lamp for Christmas. I found <a href="https://... | [
"lamp",
"led",
"christmas",
"italian",
"thingiverse",
"fragile"
] | Household > Other House Equipment | [
"170103/images/image_1_compressed.jpg",
"170103/images/image_2_compressed.jpg",
"170103/images/image_3_compressed.jpg",
"170103/images/image_4_compressed.jpg",
"170103/images/image_5_compressed.jpg",
"170103/images/image_6_compressed.jpg",
"170103/images/image_7_compressed.jpg",
"170103/images/image_8... | [
"170103/stls/LegLamp_Base.stl",
"170103/stls/LegLamp_Leg-lower.stl",
"170103/stls/LegLamp_Leg-upper.stl",
"170103/stls/LegLamp_pins_x6.stl",
"170103/stls/LegLamp_Shade.stl"
] | CC-BY | https://www.printables.com/model/170103 | data_0001.tar |
160153 | A coin stuck in a cube | <p>The original Cube design is from south2012 from Thingiverse. I redesigned it and it can fit a coin inside it. A fun thing to show your friends. They will wonder how the coin got inside there. </p> | [] | Toys & Games > Other Toys & Games | [
"160153/images/image_1_compressed.jpg",
"160153/images/image_2_compressed.jpg",
"160153/images/image_3_compressed.jpg"
] | [
"160153/stls/The Hollow Cube with a coin.stl"
] | CC-BY | https://www.printables.com/model/160153 | data_0001.tar |
104974 | A cup for toothbrush and toothpaste | A cup for toothbrush and toothpaste that looks like a tooth | Download free 3D printable STL models | [
"cup",
"toolholder",
"toothpaste",
"toothbrushholder",
"toothpasteholder"
] | Household > Bathroom | [
"104974/images/image_1_compressed.jpg"
] | [
"104974/stls/tooth.stl"
] | CC0 | https://www.printables.com/model/104974 | data_0001.tar |
853098 | A Cup of Liber-Tea! (Helldivers 2) | <figure class="image image_resized" style="width:79.83%;"><img src="https://media.printables.com/media/prints/853098/rich_content/36f66421-f289-493c-a59f-50f0798273a3/for-liber-tea-gif.gif#%7B%22uuid%22%3A%22e6d1ac0b-e72e-48f5-b92c-cdb23303e00a%22%2C%22w%22%3A267%2C%22h%22%3A144%7D"></figure><p> &nb... | [
"cup",
"game",
"videogame",
"mug",
"diver",
"nosupports",
"arrowhead",
"helldivers2",
"helldivers",
"libertea"
] | Gadgets > Video Games | [
"853098/images/image_1_compressed.jpg",
"853098/images/image_10_compressed.jpg",
"853098/images/image_11_compressed.jpg",
"853098/images/image_12_compressed.jpg",
"853098/images/image_13_compressed.jpg",
"853098/images/image_14_compressed.jpg",
"853098/images/image_15_compressed.jpg",
"853098/images/i... | [
"853098/stls/Liber-Tea for Cans!.stl",
"853098/stls/Liber-Tea!.stl"
] | CC-BY | https://www.printables.com/model/853098 | data_0001.tar |
1325961 | A Cute Toothless remix help by ChupX1E | <p>Toothless</p> | [] | 3D Printers > Accessories | [
"1325961/images/image_1_compressed.jpg"
] | [
"1325961/stls/cute-toothless.stl"
] | CC0 | https://www.printables.com/model/1325961 | data_0001.tar |
306179 | A different type of Skadis hook | <p>A different type of IKEA Skadis hook designed not to fall out under a higher load or when yanked. Ideal for looser holes.</p><p>Comes in 5, 10, 15, 20 and 25 mm versions (notch length). Notch begins 5 mm form the plane of the board.</p><p>Print flat on the side of best performance. </p> | [
"ikea",
"skadis",
"ikeaskadis"
] | Hobby & Makers > Organizers | [
"306179/images/image_1_compressed.jpg",
"306179/images/image_2_compressed.jpg"
] | [
"306179/stls/Skadis a different hook 10mm.stl",
"306179/stls/Skadis a different hook 15mm.stl",
"306179/stls/Skadis a different hook 20mm.stl",
"306179/stls/Skadis a different hook 25mm.stl",
"306179/stls/Skadis a different hook 5mm.stl"
] | CC-BY | https://www.printables.com/model/306179 | data_0001.tar |
79381 | A Door-able Stop | <p>Are those doors getting you down? Do you feel wedged under the responsibility of holding the door open for people who don't even look down at you? Are you getting cross from all the doors that are shut in your face?<br><br>Then this door stop is for you. The smooth wedge design will work with numerous door types, wi... | [
"parametric",
"human",
"thingiverse"
] | Household > Other House Equipment | [
"79381/images/image_1_compressed.jpg",
"79381/images/image_2_compressed.jpg",
"79381/images/image_3_compressed.jpg"
] | [
"79381/stls/human_stop_GameStop.stl",
"79381/stls/human_stop_hiRes_wideCorrugations.stl"
] | CC-BY | https://www.printables.com/model/79381 | data_0001.tar |
405358 | A Drive mount for PUG (Voron 2.4) | <p>This model is an attempt to design an A-Drive mount for PUG (Parametric Umbilical Gland)</p><ul><li> See<a href="https://www.printables.com/fr/model/378567-pug-parametric-umbilical-gland-for-cw2"> PUG https://www.printables.com/fr/model/378567-pug-parametric-umbilical-gland-for-cw2</a></li></ul><p>Choose either... | [
"voron",
"voron24",
"vorontrident",
"umbilical",
"voronumbilicalmod"
] | 3D Printers > Voron Parts & Upgrades | [
"405358/images/image_1_compressed.jpg",
"405358/images/image_2_compressed.jpg",
"405358/images/image_3_compressed.jpg",
"405358/images/image_4_compressed.jpg"
] | [
"405358/stls/[a]_A_drive_PUG_plate.stl",
"405358/stls/[a]_PUG_hex_holder_p1.stl",
"405358/stls/[a]_PUG_hex_holder_p2.stl",
"405358/stls/[a]_PUG_holder_p1.stl",
"405358/stls/[a]_PUG_holder_p2.stl"
] | GPL3.0 | https://www.printables.com/model/405358 | data_0001.tar |
558536 | A Drive mount for PUG (Voron Trident) | <p><br>This model is an attempt to design an A-Drive mount for PUG (Parametric Umbilical Gland)</p><ul><li> See<a href="https://www.printables.com/fr/model/378567-pug-parametric-umbilical-gland-for-cw2"> PUG https://www.printables.com/fr/model/378567-pug-parametric-umbilical-gland-for-cw2</a></li><li>For Voron 2.4... | [
"pug",
"trident",
"voron",
"vorontrident",
"umbilical"
] | 3D Printers > Voron Parts & Upgrades | [
"558536/images/image_1_compressed.jpg",
"558536/images/image_2_compressed.jpg",
"558536/images/image_3_compressed.jpg"
] | [
"558536/stls/PUG_A_drive_trident_p1.stl",
"558536/stls/PUG_A_drive_trident_p2.stl"
] | GPL3.0 | https://www.printables.com/model/558536 | data_0001.tar |
1402150 | A Halloween owl sitting on top of a carved pumpkin | <p>Owl on pumpkin</p> | [] | Seasonal designs > Autumn & Halloween | [
"1402150/images/image_1_compressed.jpg"
] | [
"1402150/stls/67fac2ac-f5ad-4ec3-9ca0-32be11aea5c3.stl"
] | CC0 | https://www.printables.com/model/1402150 | data_0001.tar |
670968 | A less obvious Pythagorean/greedy cup. | <p> In keeping with the classic greedy cup shape, but a less obvious suspicious looking centre piece, hiding the siphon mechanism in the cup wall. </p><p>There are three options to choose from, version 4 has a higher syphon height and thicker walls designed on request of <a href="https://www.printables.com/@J... | [
"pythagoreancup"
] | Learning > Physics & Astronomy | [
"670968/images/image_1_compressed.jpg",
"670968/images/image_2_compressed.jpg",
"670968/images/image_3_compressed.jpg",
"670968/images/image_4_compressed.jpg",
"670968/images/image_5_compressed.jpg",
"670968/images/image_6_compressed.jpg"
] | [
"670968/stls/a less obvious greedy cup.stl",
"670968/stls/puthagorean cup v4.stl",
"670968/stls/pythagorean cup with hidden siphon - version 3.stl"
] | GPL3.0 | https://www.printables.com/model/670968 | data_0001.tar |
225875 | A longer version of the sand / tent / beach peg | Fits perfectly along the X axis of MK3 | Download free 3D printable STL models | [
"peg",
"beach",
"sand",
"tent"
] | Sports & Outdoor > Outdoor Sports | [
"225875/images/image_1_compressed.jpg"
] | [
"225875/stls/Tent Peg 210mm.stl"
] | CC-BY | https://www.printables.com/model/225875 | data_0001.tar |
629811 | A More Grippy Clicky-Clacky Handle | <p>Small simple mod for the <a href="https://github.com/tanaes/whopping_Voron_mods/tree/main/clickyclacky_door">Clicky-Clacky Fridge Door</a> made by whoppingpochard. Me and STONEDMAKKER went back and forth about making the already awesome handle even better. We both wanted a space for the fingers to grab on to the han... | [
"door",
"extrusion",
"fridge",
"voron",
"clickyclacky"
] | 3D Printers > Voron Parts & Upgrades | [
"629811/images/image_1_compressed.jpg"
] | [
"629811/stls/Grippy_Clicky-Clacky_Handle.stl"
] | GPL3.0 | https://www.printables.com/model/629811 | data_0001.tar |
65527 | A one-of-a-kind hanging pot | <p>Hello!</p><p>This is a project I've been working on for a while. The whole thing started kind of like a thought experiment on how could I make a hanging pot that took advantage of the capacity of 3d printers to make complex organic shapes.</p><p>The first model was shaped like a droplet, but it had a flat bott... | [
"plant",
"hanging",
"plantpot",
"gardening",
"planters"
] | Household > Outdoor & Garden | [
"65527/images/image_1_compressed.jpg",
"65527/images/image_2_compressed.jpg",
"65527/images/image_3_compressed.jpg"
] | [
"65527/stls/DroPot Link.stl",
"65527/stls/DroPotKitBot.stl",
"65527/stls/DroPotKitMid.stl",
"65527/stls/DroPotTop Coupler.stl",
"65527/stls/DroPotTop.stl"
] | CC-BY | https://www.printables.com/model/65527 | data_0001.tar |
230192 | A Self Watering Planter (One Print in Spiral Vase) | <p>These parts are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. <a href="https://www.amazon.com/3D-Printer-Prusa/s?k=3D+Printer+Prusa&linkCode=ll2&tag=thingiverse09-20&linkId=28c787aef7c5a20cf2004b821dd161bf&language=en_US&ref_=... | [
"selfwatering",
"planter",
"vasemode",
"spiralvase",
"spiralvasemode",
"selfwateringplanter"
] | Household > Outdoor & Garden | [
"230192/images/image_1_compressed.jpg",
"230192/images/image_2_compressed.jpg",
"230192/images/image_3_compressed.jpg",
"230192/images/image_4_compressed.jpg",
"230192/images/image_5_compressed.jpg",
"230192/images/image_6_compressed.jpg"
] | [
"230192/stls/Hexagonal_OnePart_Planter_100W100H.stl",
"230192/stls/Hexagonal_OnePart_Planter_140W140H.stl",
"230192/stls/Hexagonal_OnePart_Planter_160W160H.stl",
"230192/stls/Hexagonal_OnePart_Planter_208W198H.stl",
"230192/stls/Hexagonal_OnePart_Planter_80W80H.stl"
] | CC0 | https://www.printables.com/model/230192 | data_0001.tar |
1312793 | A shim for Prusa Advanced Filtration - Core One Retrofit | <p>This is a model of an extra shim for <a href="https://www.printables.com/model/1211108-prusa-advanced-filtration-core-one-retrofit">Prusa Advanced Filtration - Core One Retrofit by EvoDesigns</a>. After printing the bracket and mounting it on the back of the Core One I've noticed, that there's a significant space be... | [
"filtration",
"retrofit",
"coreone"
] | 3D Printers > Prusa Parts & Upgrades | [
"1312793/images/image_1_compressed.jpg",
"1312793/images/image_2_compressed.jpg"
] | [
"1312793/stls/AFS_CoreOne_Retrofit_Bracket_Shim.stl"
] | CC-BY | https://www.printables.com/model/1312793 | data_0001.tar |
121250 | A Simple Button (20 mm) | <p>This is a simple round 20mm button with four holes.</p><p>I lost a few buttons on an old coat, and designed/printed a these to replace them all with a matching set. Included are two version: one flat, and one curved. The curved version is a more accurate replica of the original buttons, but the curvature creates una... | [
"buttons",
"button",
"20mm",
"haberdashery"
] | Fashion > Other Fashion Accessories | [
"121250/images/image_1_compressed.jpg"
] | [
"121250/stls/Button_Curved.stl",
"121250/stls/Button_Flat.stl"
] | CC-BY | https://www.printables.com/model/121250 | data_0001.tar |
1164661 | A Simple Message | <p>A simple sign, expressing my frustrations with the influx of AI generated models on Printables. </p><p>There are so many talented creators here, putting in countless hours and serious thought to share wonderful models with the 3D printing world! Don't reward the fakes and grifters just looking to try to ... | [
"ai",
"notai",
"stopthefakes"
] | Art & Design > 2D Plates & Logos | [
"1164661/images/image_1_compressed.jpg",
"1164661/images/image_2_compressed.jpg",
"1164661/images/image_3_compressed.jpg",
"1164661/images/image_4_compressed.jpg"
] | [
"1164661/stls/A Simple Sign.stl"
] | CC-BY | https://www.printables.com/model/1164661 | data_0001.tar |
354272 | A simple pasta measure. | <p>A pasta serving guide/measuring tool.</p> | [
"pasta",
"measure",
"serving",
"servingguide",
"pastaservingguide",
"pastameasure"
] | Household > Kitchen | [
"354272/images/image_1_compressed.jpg"
] | [
"354272/stls/Pasta measure.stl"
] | CC-BY | https://www.printables.com/model/354272 | data_0001.tar |
814300 | A simple screw tray | <p>Print this 3D model effortlessly in under 30 minutes with no need for supports, postprocessing, or additional materials.</p><p><strong>DON'T FORGET TO POST A MAKE! </strong>This way you can gain a bunch of prusameters 💸. Please leave a like, download, and maybe check <a href="https://www.printables.com/@Odbix... | [
"organizer",
"holder",
"container",
"small",
"screws",
"minimal",
"tray",
"tidy",
"nosupport",
"nosupportsneeded",
"nosupports",
"fasttoprint",
"under30minutes"
] | Hobby & Makers > Organizers | [
"814300/images/image_1_compressed.jpg"
] | [
"814300/stls/tray.stl"
] | CC-BY | https://www.printables.com/model/814300 | data_0001.tar |
525874 | A Small Cat Kit Card | <p>Small Cat Kit Card</p><p>Layer height: 0.1-0.3</p><p>Enjoy!</p> | [
"small",
"cat",
"printinplace",
"kitcard"
] | Tabletop Miniatures > Characters & Monsters | [
"525874/images/image_1_compressed.jpg"
] | [
"525874/stls/cat_kit_card.stl"
] | CC0 | https://www.printables.com/model/525874 | data_0001.tar |
280531 | A Stem in Vase Mode 7CM | <p>just resized this model (https://www.printables.com/model/146464-a-stem-in-vase-mode) to fit the 7cm Spiral Rose Vase. length is 19.6 cm and the stem is 1.4 cm thick</p> | [
"flower",
"spiral",
"stem",
"rose"
] | Household > Home Decor | [
"280531/images/image_1_compressed.jpg",
"280531/images/image_2_compressed.jpg",
"280531/images/image_3_compressed.jpg"
] | [
"280531/stls/stem_final.stl"
] | CC-BY | https://www.printables.com/model/280531 | data_0001.tar |
284547 | A totally normal commoner with a nice hat ... not a bunch of cats. Nope. | <p>Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250</p><p>Patrons have access to all my files in one place, a request board, as well as commercial options! Come check it out... | [
"cat",
"cats"
] | Toys & Games > Board Games | [
"284547/images/image_1_compressed.jpg"
] | [
"284547/stls/Cats in a coat presupported.stl",
"284547/stls/Cats in a coat.stl",
"284547/stls/Mr Meowington and his pet cat Sophia presupported.stl",
"284547/stls/Mr Meowington and his pet cat Sophia.stl"
] | CC-BY | https://www.printables.com/model/284547 | data_0001.tar |
291189 | A vase in a vase in a vase in a ... (customizable) | <p>A spiral vase in spiral vase mode - but these can be stored inside of each other. If you need another one, just screw one of these out, and back in when you don't need it any more.</p><p>The lead angle is so steep, they unscrew themselves by gravity, which is quite some fun to fidget with.</p><p>You can use one as l... | [
"organizer",
"stackable",
"screw",
"vasemode",
"penholder",
"containers"
] | Household > Office | [
"291189/images/image_1_compressed.jpg",
"291189/images/image_2_compressed.jpg",
"291189/images/image_3_compressed.jpg",
"291189/images/image_4_compressed.jpg",
"291189/images/image_5_compressed.jpg",
"291189/images/image_6_compressed.jpg",
"291189/images/image_7_compressed.jpg",
"291189/images/image_8... | [
"291189/stls/screw_vase_d70_h100_shell-1.stl",
"291189/stls/screw_vase_d70_h100_shell-10.stl",
"291189/stls/screw_vase_d70_h100_shell-2.stl",
"291189/stls/screw_vase_d70_h100_shell-3.stl",
"291189/stls/screw_vase_d70_h100_shell-4.stl",
"291189/stls/screw_vase_d70_h100_shell-5.stl",
"291189/stls/screw_va... | CC-BY | https://www.printables.com/model/291189 | data_0001.tar |
565763 | A wind blown spinner | <p>Insert a string or thread into the center hole and hang outdoors. It spins even in the lightest breeze. Would probably look even better printed in multiple colors. </p><p>I've had the purple spinner outside my house for over a year. It has stretched about 3-4" longer but is still going strong... | [] | Household > Outdoor & Garden | [
"565763/images/image_1_compressed.jpg",
"565763/images/image_2_compressed.jpg",
"565763/images/image_3_compressed.jpg",
"565763/images/image_4_compressed.jpg"
] | [
"565763/stls/Spinner.stl"
] | CC-BY | https://www.printables.com/model/565763 | data_0001.tar |
124658 | A-10 Warthog | 285th scale of a fully loaded A-10 warthog | Download free 3D printable STL models | [] | Art & Design > Other Art & Designs | [
"124658/images/image_1_compressed.jpg"
] | [
"124658/stls/285th_A-10_Fully_Loaded.stl"
] | CC-BY | https://www.printables.com/model/124658 | data_0001.tar |
760390 | A1 Mini - Heatbed Cable Protector Remix - snug fit connection | <p>heatbed cable connector for A1 mini , similar to the one provided for A1 , this one fit both power cord and heatbed </p> | [
"mini",
"heatbed",
"connector",
"relief",
"a1",
"stress",
"a1mini"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"760390/images/image_1_compressed.jpg",
"760390/images/image_2_compressed.jpg"
] | [
"760390/stls/Surprising Lahdi (8).stl"
] | CC-BY | https://www.printables.com/model/760390 | data_0001.tar |
1361554 | A4T Cartographer CNC Carriage Cutting Jig | <p>I wanted to use the Cartographer probe & CNC carriage with the A4T toolhead which requires removing ~1.8mm from the bottom of the mount.</p><p><strong>UPDATE: After some testing, it seems like removing the 1.8mm doesn't raise the probe high enough to be compatible with Touch probing on Cartographer. I only... | [
"cartographer",
"a4t"
] | 3D Printers > Voron Parts & Upgrades | [
"1361554/images/image_1_compressed.jpg",
"1361554/images/image_2_compressed.jpg",
"1361554/images/image_3_compressed.jpg"
] | [
"1361554/stls/1.8mm_Cartographer_A4T_Cutting_Jig.stl",
"1361554/stls/1.8mm_Cartographer_A4T_Cutting_Jig_Rigid.stl",
"1361554/stls/2.4mm_Cartographer_A4T_Cutting_Jig.stl",
"1361554/stls/2.4mm_Cartographer_A4T_Cutting_Jig_Rigid.stl"
] | CC-BY | https://www.printables.com/model/1361554 | data_0001.tar |
629326 | A6 Sized Paint Palette | <p>Designed for my need for a small unobtrusive palette primary use to hold various inks seperately. This also feeds my need for a palette with square wells and hopefully yours.</p><p>The wells and palette are small and shallow as my primary use case was acrylic inks, which are very pigmented and dries easily so a litt... | [
"paper",
"art",
"palette",
"paint",
"ink",
"mixing",
"a6"
] | Hobby & Makers > Tools | [
"629326/images/image_1_compressed.jpg",
"629326/images/image_2_compressed.jpg",
"629326/images/image_3_compressed.jpg",
"629326/images/image_4_compressed.jpg",
"629326/images/image_5_compressed.jpg",
"629326/images/image_6_compressed.jpg",
"629326/images/image_7_compressed.jpg"
] | [
"629326/stls/Palette v1.stl",
"629326/stls/Palette v2.stl",
"629326/stls/Palette v3.stl",
"629326/stls/Palette v4.stl"
] | CC-BY | https://www.printables.com/model/629326 | data_0001.tar |
246892 | AA - AAA battery simple BOX - holder for 4, 6, 8, 10, 12 pcs | <p>This model is designed to print quickly. I love design which use minimal time and material.<br>Size is for <strong>4, 6, 8, 10, 12</strong>pcs batteries. <br>Depleted batteries could be stored upside down to identify them from those already charged and ready for the action! </p><p><strong>AA_v2 with a high... | [
"aa",
"aaa",
"batteryholder",
"aabattery",
"aabatteryholder",
"batterycase",
"aaabattery",
"aaabatteryholder",
"aaabatterystorage",
"aaabatterycase",
"aaabatterybox",
"aaabatteries",
"aaabox"
] | Hobby & Makers > Organizers | [
"246892/images/image_1_compressed.jpg",
"246892/images/image_2_compressed.jpg",
"246892/images/image_3_compressed.jpg",
"246892/images/image_4_compressed.jpg"
] | [
"246892/stls/battery_cell_AAA_10pcs.stl",
"246892/stls/battery_cell_AAA_12pcs.stl",
"246892/stls/battery_cell_AAA_4pcs.stl",
"246892/stls/battery_cell_AAA_6pcs.stl",
"246892/stls/battery_cell_AAA_8pcs.stl",
"246892/stls/battery_cell_AA_10pcs.stl",
"246892/stls/battery_cell_AA_10pcs_v2.stl",
"246892/st... | CC-BY | https://www.printables.com/model/246892 | data_0001.tar |
346261 | AA and AAA Battery Holders (2, 4, 8, 12, 16 packs) |
<p>Here is a set of AA and AAA battery holders. No support needed. These holders have retention so your batteries will not slide out. Handy if you want to toss a pack in a bag and go.</p>
<p>It took 2 hours for me to print the 4AA pack at 0.3MM resolution with 20% infill.</p>
<h3>Print Settings</h3>
<p><strong>Print... | [
"battery",
"electronics",
"thingiverse",
"batteryholder",
"electronicsenclosure",
"aabatteries",
"aabattery",
"aabatteryholder",
"batterycover",
"batterycase",
"batterybox"
] | Household > Other House Equipment | [
"346261/images/image_1_compressed.jpg",
"346261/images/image_10_compressed.jpg",
"346261/images/image_11_compressed.jpg",
"346261/images/image_12_compressed.jpg",
"346261/images/image_13_compressed.jpg",
"346261/images/image_14_compressed.jpg",
"346261/images/image_15_compressed.jpg",
"346261/images/i... | [
"346261/stls/12_aaa_battery_holder.stl",
"346261/stls/12_aa_battery_holder.stl",
"346261/stls/16_aaa_battery_holder.stl",
"346261/stls/16_aa_battery_holder.stl",
"346261/stls/2_AAA_Battery_Holder.stl",
"346261/stls/2_AA_Battery_Holder.stl",
"346261/stls/4_aaa_battery_holder.stl",
"346261/stls/4_aa_bat... | CC-BY | https://www.printables.com/model/346261 | data_0001.tar |
386490 | AA Battery Box | <p>This case is adapted from my other design to suit more common batteries. The lid is designed to resist being opened accidentally. I intend to update this design in the future to add more sizes.</p> | [
"case",
"battery",
"hobby",
"travel",
"batteryholder",
"aabattery",
"filmmaking"
] | Hobby & Makers > Electronics | [
"386490/images/image_1_compressed.jpg",
"386490/images/image_2_compressed.jpg"
] | [
"386490/stls/16 AA Battery Box 2023.stl",
"386490/stls/8 AA Battery Box 2023.stl"
] | CC-BY | https://www.printables.com/model/386490 | data_0001.tar |
229288 | AA Battery Box for four AA Batteries | <p>Here is a durable case for storing 4 AA batteries. Friction fit lid holds batteries safe and secure in a gear bag, backpack, or wherever you choose to stash it. See my designs for additional AA, AAA, and C battery boxes. This print is in PLA. Works equally well in PETG.</p><p>Designed with Fusion 360.</p> | [
"batteryholder",
"aabattery",
"batterycase"
] | Hobby & Makers > Organizers | [
"229288/images/image_1_compressed.jpg",
"229288/images/image_2_compressed.jpg",
"229288/images/image_3_compressed.jpg"
] | [
"229288/stls/4AA box.stl",
"229288/stls/4AAbody.stl",
"229288/stls/4AALid.stl"
] | CC-BY | https://www.printables.com/model/229288 | data_0001.tar |
113287 | AA Battery container | [] | Gadgets > Portable Devices | [
"113287/images/image_1_compressed.jpg",
"113287/images/image_2_compressed.jpg"
] | [
"113287/stls/Base AA.stl",
"113287/stls/Coperchio AA.stl"
] | CC0 | https://www.printables.com/model/113287 | data_0001.tar | |
244916 | AA Battery Dispenser | <p>I needed a way to not only store my batteries but also make sure that they all get rotated through service. I was having one or two batteries at the bottom of my storage case that would not get used and re-charged. This solves the problem for me. I also made a 9 volt version and a AAA version.</p>
<h3>Print Settings... | [
"holder",
"storage",
"battery",
"dispenser",
"thingiverse",
"aabattery"
] | Household > Office | [
"244916/images/image_1_compressed.jpg",
"244916/images/image_2_compressed.jpg",
"244916/images/image_3_compressed.jpg"
] | [
"244916/stls/battery_dispenser_AA_left.stl",
"244916/stls/battery_dispenser_AA_right.stl"
] | CC-BY | https://www.printables.com/model/244916 | data_0001.tar |
85699 | AA Battery Dummy with electrical connection |
<p>I wanted to have a way to replace my Batteries on my Battery powered Thermostat with dummys, which i then connect to a bigger battery Pack or Power Bank because it was very hard to replace the Batteries in the Devices.<br/>
I use M3 Nuts and Bolts as battery pole, and connect a ring cable lug.</p>
<h3> Print Setti... | [
"thingiverse"
] | Hobby & Makers > Tools | [
"85699/images/image_1_compressed.jpg",
"85699/images/image_2_compressed.jpg",
"85699/images/image_3_compressed.jpg",
"85699/images/image_4_compressed.jpg",
"85699/images/image_5_compressed.jpg"
] | [
"85699/stls/Battery_Dummy_Cut_Negativ.stl",
"85699/stls/Battery_Dummy_Cut_Positiv.stl",
"85699/stls/Battery_Dummy_Negativ_-.stl",
"85699/stls/Battery_Dummy_Positiv_+.stl"
] | CC-BY | https://www.printables.com/model/85699 | data_0001.tar |
368124 | AA Battery Eliminator Power Adapter | <p>This Adapter is intended to provide a method for replacing standard AA Batteries with a connection to a battery pack of higher capacity (but same voltage) or any other external power source that could provide power for a longer time.</p>
<p>It can be used on older cameras or other devices that don't have a separate ... | [
"aa",
"battery",
"adapter",
"eliminator",
"thingiverse",
"aabattery",
"cameraadapter",
"batteryeliminator"
] | Hobby & Makers > Other Ideas | [
"368124/images/image_1_compressed.jpg",
"368124/images/image_10_compressed.jpg",
"368124/images/image_11_compressed.jpg",
"368124/images/image_12_compressed.jpg",
"368124/images/image_13_compressed.jpg",
"368124/images/image_14_compressed.jpg",
"368124/images/image_15_compressed.jpg",
"368124/images/i... | [
"368124/stls/AA_BEPA_ver.A_pref.stl",
"368124/stls/AA_BEPA_ver.B.stl",
"368124/stls/AA_BEPA_ver.C.stl",
"368124/stls/AA_BEPA_ver.D.stl"
] | CC-BY | https://www.printables.com/model/368124 | data_0001.tar |
31755 | AA Battery Holder | <p>Battery Holder for 17 AA batteries.</p><h3>Print instructions</h3><p>Successfully printed using the Prusament PLA Prusa Galaxy Black.</p><ul><li>Printer: Prusa Mini</li><li>Layer Height: 0.15mm</li><li>Infill: 15%</li><li>Supports: None</li></ul><p>--------</p><p>Other batteries holder having the same design:</p><p>... | [
"aa",
"battery",
"batteryholder",
"aabattery",
"aabatteryholder"
] | Gadgets > Other Gadgets | [
"31755/images/image_1_compressed.jpg",
"31755/images/image_2_compressed.jpg",
"31755/images/image_3_compressed.jpg"
] | [
"31755/stls/battery-holder-aa-v12.stl"
] | CC-BY | https://www.printables.com/model/31755 | data_0001.tar |
380920 | AA Battery Holder for DuPont jumper | <p>I was needing a battery holder, and due to my lack of patience to wait 2 days for the order to arrive, it occurred to me to make a very simple model of battery holder that can be used directly with DuPont cables.</p><p>The model has two small notches on each side, large enough for the DuPont connector to be firmly i... | [
"holder",
"aabattery",
"mignon"
] | Hobby & Makers > Electronics | [
"380920/images/image_1_compressed.jpg",
"380920/images/image_2_compressed.jpg",
"380920/images/image_3_compressed.jpg",
"380920/images/image_4_compressed.jpg"
] | [
"380920/stls/AA Battery Holder v1.1.stl"
] | CC0 | https://www.printables.com/model/380920 | data_0001.tar |
1088745 | AA Battery Magazine | Not my model, share it via makerworld.com from SD Studios.
printed with Nebula PETG on Prusa i3 MK3S | Download free 3D printable STL models | [
"baterie",
"zasobnik"
] | Gadgets > Other Gadgets | [
"1088745/images/image_1_compressed.jpg",
"1088745/images/image_2_compressed.jpg",
"1088745/images/image_3_compressed.jpg",
"1088745/images/image_4_compressed.jpg",
"1088745/images/image_5_compressed.jpg"
] | [
"1088745/stls/AA+Battery+Magazine+V2.stl"
] | CC0 | https://www.printables.com/model/1088745 | data_0001.tar |
53319 | AA battery simple holder | <p>Simple and compact organizer for 36 AA batteries.<br/>
Very cheap to print with little excess material.<br/>
There is a smaller version for 4 batteries.</p>
<h3>Print instructions</h3><h3>Category: Organization Summary</h3>
<p>Simple and compact organizer for 36 AA batteries.<br/>
Very cheap to print with little ... | [
"thingiverse"
] | Hobby & Makers > Organizers | [
"53319/images/image_1_compressed.jpg",
"53319/images/image_2_compressed.jpg",
"53319/images/image_3_compressed.jpg"
] | [
"53319/stls/aa_holder_x36.stl",
"53319/stls/aa_holder_x4.stl"
] | CC0 | https://www.printables.com/model/53319 | data_0001.tar |
479432 | AA Battery Storage | <p>Holds up to 50 AA batteries.</p><p>I printed the box at a layer height of 0.2mm with a 0.4mm nozzle. It took about 11 hours.</p><p>There are two models: </p><ul><li>the first one contains 5 holes underneath to insert 10 mm diameter and 3.2 mm high anti-slip pads.</li><li>The second one is completely smooth.</li... | [
"storage",
"battery",
"batteryholder",
"batterycase",
"batterybox"
] | 3D Printers > Accessories | [
"479432/images/image_1_compressed.jpg"
] | [
"479432/stls/AA Battery Storage none-slip.stl",
"479432/stls/AA Battery Storage.stl"
] | CC-BY | https://www.printables.com/model/479432 | data_0001.tar |
56070 | AA Battery Storage Box | <p>This is a remix of my Rugged Parametric Box to hold AA Batteries.</p>
<h3>Print instructions</h3><h3>Category: Tool Holders & Boxes Summary</h3>
<p>This is a remix of my Rugged Parametric Box to hold AA Batteries.</p> | [
"thingiverse"
] | Hobby & Makers > Organizers | [
"56070/images/image_1_compressed.jpg",
"56070/images/image_2_compressed.jpg",
"56070/images/image_3_compressed.jpg",
"56070/images/image_4_compressed.jpg"
] | [
"56070/stls/aa_battery_box_bottom.stl",
"56070/stls/aa_battery_box_top.stl"
] | CC-BY | https://www.printables.com/model/56070 | data_0001.tar |
56028 | AA battery to D-cell adapter | <p>I have lots rechargeable AA batteries, and a few things that require D-cells. This will let those AA's work in the D-cell applications. (LED camping lantern, mattress pump etc.) and the AA's are small so you can carry extras and replace them as needed. (Yes they might not have the current capacity of D-cells, but it... | [
"battery",
"adapter",
"thingiverse",
"aabattery",
"dcell"
] | Hobby & Makers > Electronics | [
"56028/images/image_1_compressed.jpg",
"56028/images/image_2_compressed.jpg",
"56028/images/image_3_compressed.jpg",
"56028/images/image_4_compressed.jpg"
] | [
"56028/stls/aa-adapter-d-5.stl",
"56028/stls/aaadapterd4.stl"
] | CC-BY | https://www.printables.com/model/56028 | data_0001.tar |
172531 | AA Beer Crate |
<p>Simple AA battery cell holder in the style of a beer crate.</p>
<p>Holds up to 20 cells.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>I3 MK3S</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-... | [
"thingiverse",
"aabattery",
"aabatteryholder",
"aaabatterystorage"
] | Hobby & Makers > Other Ideas | [
"172531/images/image_1_compressed.jpg",
"172531/images/image_2_compressed.jpg"
] | [
"172531/stls/AA_Battery_Beer_Crate.stl"
] | CC-BY | https://www.printables.com/model/172531 | data_0001.tar |
148976 | AA FIFO Battery Queue | <p><strong>UPDATE: </strong>2022-03-14 – STL files have been rotated and settled for easy slicing.</p><p><strong>NOTE:</strong> Performance may be affected by print quality on the battery tracks. Clean up any PETG clumps or boogers.</p><p>This AA battery holder ensures the oldest battery is the first to be used. Especi... | [
"holder",
"case",
"battery",
"rechargeable"
] | Hobby & Makers > Electronics | [
"148976/images/image_1_compressed.jpg",
"148976/images/image_2_compressed.jpg"
] | [
"148976/stls/AABack Brace (loose).stl",
"148976/stls/AABack Brace.stl",
"148976/stls/AABodyL.stl",
"148976/stls/AABodyL_ears.stl",
"148976/stls/AABodyR.stl",
"148976/stls/AABodyR_ears.stl",
"148976/stls/AABottom Brace (loose).stl",
"148976/stls/AABottom Brace.stl",
"148976/stls/AATop Brace (loose).s... | CC0 | https://www.printables.com/model/148976 | data_0001.tar |
162623 | AA to C Battery Adapter |
<p>Yet again the search engine of Thingiverse failed me and no AA to C adapter design came up. So I designed mine. Now the search engine works and some very good designs are now visible to me... After design, iterations and a few prints were made... Eh, at least I confirmed my design works just fine and is really ri... | [
"battery",
"adapter",
"thingiverse",
"aabattery"
] | Hobby & Makers > Electronics | [
"162623/images/image_1_compressed.jpg",
"162623/images/image_2_compressed.jpg",
"162623/images/image_3_compressed.jpg"
] | [
"162623/stls/AAtoC.stl"
] | CC-BY | https://www.printables.com/model/162623 | data_0001.tar |
926057 | AA to C battery adapter (vase mode) | <p>AA to C battery adapter (vase mode).</p><p>Use Line width 0.6mm and 0 - bottom shell layers.</p> | [
"aa",
"battery",
"adapter",
"aabattery",
"cbattery"
] | Hobby & Makers > Tools | [
"926057/images/image_1_compressed.jpg",
"926057/images/image_2_compressed.jpg",
"926057/images/image_3_compressed.jpg"
] | [
"926057/stls/AA to C vase.stl"
] | CC0 | https://www.printables.com/model/926057 | data_0001.tar |
78540 | AA to C battery adapter - Type 3 with rigid shell | <p>Some time ago I published an adapter (see remix list) for using AA cells in place of C cells. That adapter works quite well in most cases, but I recently had an application that required a more ridgid shell.</p><p>This new version takes longer to print than the old one, and uses more material, but when you need some... | [] | Hobby & Makers > Mechanical Parts | [
"78540/images/image_1_compressed.jpg",
"78540/images/image_2_compressed.jpg"
] | [
"78540/stls/AAtoC02 - Adapter.stl"
] | CC0 | https://www.printables.com/model/78540 | data_0001.tar |
807240 | AA to D battery adapter | <p>4 versions<br>14.6 mm battery hole and thread for M3 and M4 screw.<br>14.8 mm battery hole and thread for M3 and M4 screw.</p><p>I used M3×10 and M4×12 screws.</p><p>🔋IKEA LADDA Rechargeable battery, HR06 AA 1.2V, 2450mAh – version 14.6 mm.</p><p>🔋LIDL TRONIC Rechargeable battery, HR06 AA – version 14.8 mm.</p> | [
"battery",
"adapter",
"reduction"
] | Hobby & Makers > Electronics | [
"807240/images/image_1_compressed.jpg",
"807240/images/image_2_compressed.jpg",
"807240/images/image_3_compressed.jpg",
"807240/images/image_4_compressed.jpg"
] | [
"807240/stls/Bottom 146.stl",
"807240/stls/Bottom 148.stl",
"807240/stls/Top M3 146.stl",
"807240/stls/Top M3 148.stl",
"807240/stls/Top M4 146.stl",
"807240/stls/Top M4 148.stl"
] | CC-BY | https://www.printables.com/model/807240 | data_0001.tar |
355231 | AA / AAA Battery Holder/Dispenser | <p>Remixed this model to eliminate the waste battery dispenser and just have the dispenser/ holder for AA/AAA batteries. I would recommend printing in PETG or PLA. print with supports</p> | [
"aa",
"aaa",
"batteryholder",
"aabattery",
"aaabattery",
"batterydispenser"
] | Hobby & Makers > Organizers | [
"355231/images/image_1_compressed.jpg"
] | [
"355231/stls/AAAandAA Dispenser.stl"
] | CC-BY | https://www.printables.com/model/355231 | data_0001.tar |
98402 | AA+AAA Battery Holder | <p>Preview: <a href="https://a360.co/3EaWEBr">https://a360.co/3EaWEBr</a></p> | [
"box",
"organizer",
"aa",
"holder",
"aaa",
"storage",
"battery"
] | Hobby & Makers > Organizers | [
"98402/images/image_1_compressed.jpg"
] | [
"98402/stls/Battery Storage.stl"
] | CC0 | https://www.printables.com/model/98402 | data_0001.tar |
168134 | AA+AAA Multi Battery Box AA AAA | <p>Inspired by Duncans Battery Box. The following improvements has been made:</p><ul><li><strong>Store 24 AA and 20 AAA batteries in one box.</strong> <br>The original design required you to print two separate boxes. </li><li><strong>Can fit rechargeable batteries.</strong><br>Since most rechargeable batterie... | [
"box",
"organizer",
"organiser",
"multicolor",
"multi",
"aaa",
"storage",
"battery",
"storagebox",
"18650",
"thingiverse",
"18650case",
"batteryholder",
"18650battery",
"aabatteries",
"aabattery",
"aabatteryholder",
"batterycover",
"aaabattery",
"aaabatteryholder",
"16340",
... | Household > Other House Equipment | [
"168134/images/image_1_compressed.jpg",
"168134/images/image_2_compressed.jpg",
"168134/images/image_3_compressed.jpg",
"168134/images/image_4_compressed.jpg"
] | [
"168134/stls/aa_aaa_box.stl",
"168134/stls/aa_aaa_lid.stl"
] | CC-BY | https://www.printables.com/model/168134 | data_0001.tar |
454555 | AA-AAA Batteries rugged box | Remixed rugged box from @TheSameNameTwice to hold 8 AA and 6 AAA batteries. | Download free 3D printable STL models | [
"box",
"organizer",
"case",
"battery",
"batterycase",
"batteries",
"rugged"
] | Hobby & Makers > Organizers | [
"454555/images/image_1_compressed.jpg",
"454555/images/image_2_compressed.jpg",
"454555/images/image_3_compressed.jpg"
] | [
"454555/stls/rugged_battery_box_bottom.stl",
"454555/stls/rugged_battery_box_top.stl"
] | CC-BY | https://www.printables.com/model/454555 | data_0001.tar |
177142 | AAA & AA Akku Battery Riser Nitecore D4 Digicharger and others | <p>This is my version to rise AA & AAA batteries so they can charge properly.</p><p>There is a grip area to remove the riser easily. The "bottom" part of the riser is flat to enable a good access to the batteries.</p><p>It is also possible to leave the riser in place and even use them while the charger is mounted t... | [
"aaa",
"battery",
"thingiverse",
"aabattery",
"aaabattery",
"nitecore",
"ladegeraet",
"laden",
"aaaakku",
"aaakkju",
"d4aaa",
"digicharger",
"digichargerd4",
"nitecoreaa",
"nitecoreaaa",
"nitecored4",
"nitecoredigicharger",
"aufladegeraet",
"batterien",
"akkus",
"erhoehen"
] | Hobby & Makers > Electronics | [
"177142/images/image_1_compressed.jpg",
"177142/images/image_2_compressed.jpg",
"177142/images/image_3_compressed.jpg",
"177142/images/image_4_compressed.jpg",
"177142/images/image_5_compressed.jpg",
"177142/images/image_6_compressed.jpg"
] | [
"177142/stls/BatteryRiserV2.stl",
"177142/stls/D4_Riser(old).stl"
] | CC-BY | https://www.printables.com/model/177142 | data_0001.tar |
24595 | AAA Battery Box for four AAA Batteries | <p>I have devices that like to drain batteries and then suffer leakage, (and one AAA device in particular), so I like to keep the batteries outside the device. Here's a case aiming for minimal size and reduced material, while maintaining sufficient strength to be durable. Friction fit lid designed with .05mm radius cle... | [
"box",
"thingiverse",
"batteryholder",
"aaabatteryholder",
"aaabatterycase",
"aaabatterybox"
] | Hobby & Makers > Organizers | [
"24595/images/image_1_compressed.jpg",
"24595/images/image_2_compressed.jpg",
"24595/images/image_3_compressed.jpg",
"24595/images/image_4_compressed.jpg",
"24595/images/image_5_compressed.jpg"
] | [
"24595/stls/aaa_body.stl",
"24595/stls/aaa_lid.stl"
] | CC0 | https://www.printables.com/model/24595 | data_0001.tar |
206878 | AAA Battery Container - spiral vase mode | <p>You can print both vase parts with BatterieBox2xAAA-Body_0.3mm_PLA_MK3S_14m.gcode sequential.<br><br>or create you own .gcode with BatterieBox2xAAA-Body.3mf.<br><br>Or print the .stl files in spiral vase mode (one after the other) with 0.3 mm layer height.</p> | [
"battery",
"batterycover",
"batterycase",
"aaabatteryholder",
"batterybox",
"aaabatterystorage"
] | Hobby & Makers > Organizers | [
"206878/images/image_1_compressed.jpg",
"206878/images/image_2_compressed.jpg"
] | [
"206878/stls/BatterieBox2xAAA-Body.stl",
"206878/stls/Container.stl",
"206878/stls/Lid.stl"
] | CC-BY | https://www.printables.com/model/206878 | data_0001.tar |
18826 | AAA battery dispenser | <p>This is a remix of @BlackBird7171's Expandable Battery Dispenser (<a href="https://www.thingiverse.com/thing:399744/">https://www.thingiverse.com/thing:399744/#comments</a>), scaled according to @mc2lagrange's suggestion in the comments. Fits AAA batteries perfectly.</p>
<p>Print with fan to avoid sloppy corners, bu... | [
"thingiverse"
] | Hobby & Makers > Organizers | [
"18826/images/image_1_compressed.jpg",
"18826/images/image_2_compressed.jpg",
"18826/images/image_3_compressed.jpg",
"18826/images/image_4_compressed.jpg"
] | [
"18826/stls/battery_dispenser_aaa.stl",
"18826/stls/battery_dispenser_aaa_extension_fixed.stl"
] | CC-BY | https://www.printables.com/model/18826 | data_0001.tar |
31365 | AAA Battery Holder | <p>Battery Holder for 23 AAA batteries.<br><br>This is the first model I have ever created.</p><h3>Print instructions</h3><p>Successfully printed using the Prusament PLA Prusa Galaxy Black.</p><ul><li>Printer: Prusa Mini</li><li>Layer Height: 0.15mm</li><li>Infill: 15%</li><li>Supports: None</li></ul><p>-----</p><p>Oth... | [
"aaa",
"battery",
"batteryholder",
"aaabattery",
"aaabatteryholder"
] | Gadgets > Other Gadgets | [
"31365/images/image_1_compressed.jpg",
"31365/images/image_2_compressed.jpg",
"31365/images/image_3_compressed.jpg"
] | [
"31365/stls/battery-holder-v12.stl"
] | CC-BY | https://www.printables.com/model/31365 | data_0001.tar |
479452 | AAA Battery Storage | <p>Holds up to 25 AAA batteries.</p><p>I printed the box at a layer height of 0.2mm with a 0.4mm nozzle. It took about 4 hours.</p><p>There are two models: </p><ul><li>the first one contains 5 holes underneath to insert 10 mm diameter and 3.2 mm high anti-slip pads.</li><li>The second one is completely smooth.</li... | [
"storage",
"battery",
"batteryholder",
"batterycase",
"batterybox"
] | 3D Printers > Accessories | [
"479452/images/image_1_compressed.jpg"
] | [
"479452/stls/AAA Battery Storage none-slip.stl",
"479452/stls/AAA Battery Storage.stl"
] | CC-BY | https://www.printables.com/model/479452 | data_0001.tar |
56069 | AAA Battery Storage Box | <p>This is a remix of my Rugged Parametric Box designed to store AAA batteries.</p>
<h3>Print instructions</h3><h3>Category: Containers Summary</h3>
<p>This is a remix of my Rugged Parametric Box designed to store AAA batteries.</p> | [
"thingiverse"
] | Hobby & Makers > Organizers | [
"56069/images/image_1_compressed.jpg",
"56069/images/image_2_compressed.jpg",
"56069/images/image_3_compressed.jpg",
"56069/images/image_4_compressed.jpg"
] | [
"56069/stls/aaa-battery-box_top.stl",
"56069/stls/aaa_battery_box_bottom.stl"
] | CC-BY | https://www.printables.com/model/56069 | data_0001.tar |
173315 | AAA Beer Crate |
<p>Simple AAA battery cell holder in the style of a beer crate.</p>
<p>Holds up to 20 cells.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>I3 MK3S</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail... | [
"thingiverse",
"aaabattery",
"aaabatteryholder",
"aaabatterycase",
"aaabatterybox"
] | Hobby & Makers > Other Ideas | [
"173315/images/image_1_compressed.jpg",
"173315/images/image_2_compressed.jpg"
] | [
"173315/stls/AAA_Beer_Crate.stl"
] | CC-BY | https://www.printables.com/model/173315 | data_0001.tar |
360460 | AAA box | battery box aaa | Download free 3D printable STL models | [] | Gadgets > Other Gadgets | [
"360460/images/image_1_compressed.jpg"
] | [
"360460/stls/aaa_48_bottom.stl",
"360460/stls/aaa_48_top.stl"
] | CC0 | https://www.printables.com/model/360460 | data_0001.tar |
716852 | AAA to AA Battery Adapter | <p>Utilize your extra computer screws (that came with your motherboard) to create an adapter for AAA batteries. This design reduces weight of devices such as mice or other electronics that use AA batteries.</p><p>There are two versions. One with slotted holes and one with hexagonal holes.</p><p>Print without support. I... | [
"mouse",
"aaa",
"battery",
"adapter"
] | Gadgets > Computers | [
"716852/images/image_1_compressed.jpg",
"716852/images/image_2_compressed.jpg",
"716852/images/image_3_compressed.jpg",
"716852/images/image_4_compressed.jpg",
"716852/images/image_5_compressed.jpg"
] | [
"716852/stls/AAA-to-AA-hex.stl",
"716852/stls/AAA-to-AA.stl"
] | CC-BY | https://www.printables.com/model/716852 | data_0001.tar |
77944 | AAA to AA Lightweight battery adapter | <p>Just Your standard AAA to AA adapter that helps with reducing weight of things like mice (in my case). </p><p>You can also use it in emergency situations when you have only AAA batteries on hand :)</p><p>You need:<br>- 1x button head M3x5 bolt</p><p><strong>Updated design!</strong><br><strong>- V2 vase mode ver... | [
"mouse",
"gaming",
"adapter",
"aabattery",
"aaabattery",
"batteryadapter"
] | Hobby & Makers > Electronics | [
"77944/images/image_1_compressed.jpg",
"77944/images/image_2_compressed.jpg",
"77944/images/image_3_compressed.jpg",
"77944/images/image_4_compressed.jpg"
] | [
"77944/stls/AAA_AA_adapter_V1.stl",
"77944/stls/AAA_AA_adapter_V2.stl",
"77944/stls/AAA_AA_adapter_V2_Vase.stl"
] | GPL3.0 | https://www.printables.com/model/77944 | data_0001.tar |
319215 | AAP-01 Suppressor 70mm | <p>Do you like tiny suppressor like me? </p><p> </p><p>I present to you my little custom suppressor for the AAP-01!</p><p>You can put this bad-boy on your airsoft replica with the 14mm CCW thread to have a really cool looking gun!</p><p> </p><p><strong>!!!!!!! AIRSOFT ONLY !!!!!!!</strong></p><p> </... | [] | Toys & Games > Other Toys & Games | [
"319215/images/image_1_compressed.jpg",
"319215/images/image_2_compressed.jpg",
"319215/images/image_3_compressed.jpg"
] | [
"319215/stls/AAP-01_Suppressor.stl"
] | CC0 | https://www.printables.com/model/319215 | data_0001.tar |
121334 | AA/AAA Battery Holder | <p>I found a lot of designs for battery holders but wanted to have a bit of fun with a slight spin on the designs I have seen. This will hold approximately 34 AAA batteries and 27 AA batteries and organizes them inside by utilizing parallel zig-zagged tracks. Although you can't see the batteries as they mov... | [
"organizer",
"aa",
"aaa",
"battery",
"aabatteryholder",
"aaabatteryholder",
"aaabatterystorage",
"aabatterystorage"
] | Hobby & Makers > Organizers | [
"121334/images/image_1_compressed.jpg",
"121334/images/image_2_compressed.jpg",
"121334/images/image_3_compressed.jpg"
] | [
"121334/stls/AA-AAA-Battery_Holder-bottom-7.stl",
"121334/stls/AA-AAA-Battery_Holder-top-7.stl",
"121334/stls/AA-AAA-Battery_Holder-top_ViewHoles-7.stl"
] | CC-BY | https://www.printables.com/model/121334 | data_0001.tar |
89705 | AA/AAA Battery Packs | <p><strong>Simple Battery Packs! – AA/AAA</strong></p><p>This is a simple, fast-to-print battery pack that uses 22 gauge solid core wire and aluminum foil intended for powering breadboards or small electronics. Once the wires are fastened the material will flex slightly to keep the batteries in place.</p><p>The design ... | [
"battery",
"power",
"electronics",
"breadboard",
"powersupply",
"diyelectronics",
"batteryholder",
"aabattery",
"aaabattery"
] | Hobby & Makers > Electronics | [
"89705/images/image_1_compressed.jpg",
"89705/images/image_2_compressed.jpg",
"89705/images/image_3_compressed.jpg",
"89705/images/image_4_compressed.jpg",
"89705/images/image_5_compressed.jpg",
"89705/images/image_6_compressed.jpg",
"89705/images/image_7_compressed.jpg"
] | [
"89705/stls/AAA_2pack.stl",
"89705/stls/AAA_3pack.stl",
"89705/stls/AAA_3stackedpack.stl",
"89705/stls/AA_2pack.stl",
"89705/stls/AA_3pack.stl",
"89705/stls/AA_3stackedpack.stl"
] | CC0 | https://www.printables.com/model/89705 | data_0001.tar |
250476 | AA/AAA/CR2032/9V/ Battery box SD/Micro SD Box | <p>Storage Box for AA/AAA/CR2032/9V Battery or /SD/Micro SD/or small parts</p><p>3 Type of lid</p><ol><li>type 1 full closed no stakable option no inscription</li><li>type 2 for stakable option no inscription</li><li>type 3 for stakable option with inscription</li></ol><p>infill 10 %</p> | [] | Hobby & Makers > Organizers | [
"250476/images/image_1_compressed.jpg",
"250476/images/image_2_compressed.jpg",
"250476/images/image_3_compressed.jpg",
"250476/images/image_4_compressed.jpg",
"250476/images/image_5_compressed.jpg",
"250476/images/image_6_compressed.jpg",
"250476/images/image_7_compressed.jpg"
] | [
"250476/stls/2032_Plate_fixed.stl",
"250476/stls/9V_battery_insert_fixed.stl",
"250476/stls/9V_Plate_fixed.stl",
"250476/stls/AAA_battery_insert_fixed.stl",
"250476/stls/AAA_Plate_fixed.stl",
"250476/stls/AA_battery_insert_fixed.stl",
"250476/stls/AA_Plate_fixed.stl",
"250476/stls/Blank_Plate_fixed.st... | CC-BY | https://www.printables.com/model/250476 | data_0001.tar |
482381 | Abalone Board Game | <p>Abalone is a fascinating 2-player board game - learn to play by watching Triple S Games' video linked below. This model allows you to print your own Abalone board. You use marbles as the pieces - you will need two sets of fourteen marbles, contrasting in appearance (eg 14 white marbles and 14 black marbles). There a... | [
"boardgame",
"abalone"
] | Toys & Games > Board Games | [
"482381/images/image_1_compressed.jpg",
"482381/images/image_2_compressed.jpg",
"482381/images/image_3_compressed.jpg"
] | [
"482381/stls/abalone_board_14mm.stl",
"482381/stls/abalone_board_16mm.stl",
"482381/stls/abalone_board_25mm.stl",
"482381/stls/abalone_edge_14mm.stl",
"482381/stls/abalone_edge_16mm.stl",
"482381/stls/abalone_edge_25mm.stl",
"482381/stls/abalone_lid_14mm.stl",
"482381/stls/abalone_lid_16mm.stl",
"48... | GPL3.0 | https://www.printables.com/model/482381 | data_0001.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.