model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
870790 | 4Z-Puzzle | <p>Puzzle description: The 4Z Puzzle is a classic one: Four copies of the Z pentomino should be placed into the tray.</p><p>Puzzle difficulty: This is an easy puzzle, nice for beginners. Nevertheless the solution provides an Eureka moment.</p><p>If you can read German: Mehr Informationen gibt es in <a href="https://wel... | [
"puzzle",
"pentomino",
"packingpuzzle",
"polyomino"
] | Toys & Games > Puzzles & Brain-teasers | [
"870790/images/image_1_compressed.jpg",
"870790/images/image_2_compressed.jpg",
"870790/images/image_3_compressed.jpg"
] | [
"870790/stls/4Z_Piece.stl",
"870790/stls/4Z_Tray.stl"
] | CC-BY | https://www.printables.com/model/870790 | data_0001.tar |
602628 | 4" French Cleat | <p>Simple french cleat block to drill into boxes or items to mount onto walls or themselves.</p><p>Print two to mount items together, or use pre-existing items to mount to a french cleat system.</p> | [
"wall",
"french",
"wallmount",
"cleat",
"wallmounted",
"frenchcleat",
"frenchcleatsystem",
"cleats"
] | Art & Design > Wall-mounted | [
"602628/images/image_1_compressed.jpg"
] | [
"602628/stls/French_Cleat_M6CS.stl"
] | CC-BY | https://www.printables.com/model/602628 | data_0001.tar |
1333158 | 5 blade fan propeller | <p>I have designed a replacement propeller for my fan, which had broken. It works perfectly and silently, it measures 36cm in diameter and it fits an 8mm shaft. It's fully 3D printable without supports, and it doesn’t require any glue or screws for assembly. It stays together thanks to the pressure from the nut. I have... | [] | Household > Living Room | [
"1333158/images/image_1_compressed.jpg",
"1333158/images/image_2_compressed.jpg",
"1333158/images/image_3_compressed.jpg"
] | [
"1333158/stls/fan blade.stl",
"1333158/stls/fan hub bottom.stl",
"1333158/stls/fan top hub.stl"
] | CC-BY | https://www.printables.com/model/1333158 | data_0001.tar |
664506 | 5 Color Death Trooper | <p>I love mmu prints and this was a great one. It was a pain to paint, but the print came out amazing! You might want to tweak the support settings, they were a pain to remove.</p> | [
"multimaterial",
"trooper",
"storm",
"death",
"mmm"
] | Art & Design > Sculptures | [
"664506/images/image_1_compressed.jpg",
"664506/images/image_2_compressed.jpg"
] | [
"664506/stls/Death Trooper XLIS.stl"
] | CC-BY | https://www.printables.com/model/664506 | data_0001.tar |
458191 | 5 Gallon Bucket Handle | <p>Replacement handle for a 5 gallon bucket. Larger diameter to make it easier to carry and use a heavy bucket. </p><p>Cut off the original plastic little handle, place this on, and slide the insert in with some superglue of your choice to hold it in place. </p><p>Insert is glued in place, no fasteners... | [
"handle",
"bucket",
"ergonomic"
] | Hobby & Makers > Tools | [
"458191/images/image_1_compressed.jpg"
] | [
"458191/stls/Bucket Handle Insert Lay flat Extra Clearance.stl",
"458191/stls/Bucket Handle Insert Lay flat v2.stl",
"458191/stls/Bucket Handle.stl"
] | CC0 | https://www.printables.com/model/458191 | data_0001.tar |
21142 | 5 Gallon Bucket Mouse Trap | <p>So, I noticed a mouse in my garage and decided to remedy this. I have a 5-gallon bucket from Lowe's hardware store and noticed that it already had a spinning contraption built into its handle. So, I designed a finned bait-holder that can snap onto it. I also designed some "handle locks": blocks that ensure that the ... | [
"thingiverse",
"mousetrap"
] | Household > Outdoor & Garden | [
"21142/images/image_1_compressed.jpg",
"21142/images/image_2_compressed.jpg",
"21142/images/image_3_compressed.jpg"
] | [
"21142/stls/bucket-mouse-trap.stl",
"21142/stls/handle-lock.stl",
"21142/stls/spinnerstl.stl"
] | CC-BY | https://www.printables.com/model/21142 | data_0001.tar |
150066 | 5 Point Star Knob 1/4"x20 | <p>5 Point Star Knob 1/4"x20 hole for a 14x20 bolt. I used it on a swinging table for my disc sander. I would have taken a pic but I sold the lathe which the sander table adapted to. </p> | [
"knob",
"woodworking"
] | Hobby & Makers > Tools | [
"150066/images/image_1_compressed.jpg"
] | [
"150066/stls/5 Point Knob v1.stl"
] | CC0 | https://www.printables.com/model/150066 | data_0001.tar |
4670 | 5 Wheel Buffer for MMU2 | <p>An alternate solution to MMU2S buffer. Easy to locate away from filament and easy to load.</p>
<p>Somewhat of a remix (or at least inspired by) <a href="https://www.thingiverse.com/thing:3529934">https://www.thingiverse.com/thing:3529934</a> from jgillick</p>
<p>EDIT: Loop the filament around the wheel twice before ... | [
"mmu",
"filament",
"buffer",
"mmu2s",
"filamentbuffer"
] | 3D Printers > Accessories | [
"4670/images/image_1_compressed.jpg",
"4670/images/image_2_compressed.jpg",
"4670/images/image_3_compressed.jpg",
"4670/images/image_4_compressed.jpg"
] | [
"4670/stls/filamentbuffer_base.stl",
"4670/stls/filamentbuffer_vertical.stl",
"4670/stls/filamentbuffer_wheel.stl"
] | CC0 | https://www.printables.com/model/4670 | data_0001.tar |
69066 | 5+1 Multicolor Cute Unicorn | <p>I made a few changes on the MMU Remix from <a href="https://www.thingiverse.com/thing:3630177">DesignFlaw06</a>:</p><p>- Scaled the unicorn to 160mm height<br>- Right Ear part is thicker for better printing<br>- Hair part on forehead is also thicker for better printing<br>- Horn is scaled up a bit ~10%<br>- 3 Perime... | [
"mmu",
"multicolor",
"mmu2s",
"unicorn"
] | Art & Design > Sculptures | [
"69066/images/image_1_compressed.jpg",
"69066/images/image_2_compressed.jpg",
"69066/images/image_3_compressed.jpg",
"69066/images/image_4_compressed.jpg",
"69066/images/image_5_compressed.jpg"
] | [
"69066/stls/3x_160mm_Unicorn_5+1color_.stl"
] | CC-BY | https://www.printables.com/model/69066 | data_0001.tar |
543518 | 5.25" bay to 2x 2.5" SSD slot adapter | <p>Very basic adapter to mount two 2.5" SSD drives in a common 5.25" drive bay.</p><p>You can use the <strong>modifier mesh</strong> to remove top and bottom surfaces in those areas and save both time and filament.</p><p>It uses M3 screws and nuts.</p><p> </p><h3>Print Settings</h3><p><strong>Printer Brand: </stro... | [
"ssd",
"thingiverse",
"ssdadaptor",
"ssdmount",
"ssdadapter"
] | Gadgets > Computers | [
"543518/images/image_1_compressed.jpg",
"543518/images/image_2_compressed.jpg",
"543518/images/image_3_compressed.jpg"
] | [
"543518/stls/5.25in_bay_to_2.5in_SSD_adapter_v1.0_MODIFIERS_STL.stl",
"543518/stls/5.25in_bay_to_2.5in_SSD_adapter_v1.0_STL.stl"
] | CC-BY | https://www.printables.com/model/543518 | data_0001.tar |
60554 | 5.25" DVD/Blu-Ray Drive Enclosure/Sleeve | <p>Simple Enclosure/Sleeve for a 5.25" DVD or Blu-Ray Drive. Designed for the shorter 170mm drives.</p><p>Hole at the back is for an Inateck UA1001 SATA to USB3 adapter, which is the neatest/smallest one I could find (<a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.inateck.co... | [
"enclosure",
"dvddrive",
"thingiverse",
"opticaldrive",
"bluray",
"cdromdrive"
] | Gadgets > Computers | [
"60554/images/image_1_compressed.jpg",
"60554/images/image_2_compressed.jpg",
"60554/images/image_3_compressed.jpg",
"60554/images/image_4_compressed.jpg"
] | [
"60554/stls/dvdcaddy_all.stl",
"60554/stls/dvdcaddy_bottom.stl",
"60554/stls/dvdcaddy_top.stl"
] | CC-BY | https://www.printables.com/model/60554 | data_0001.tar |
155577 | 50 Cent Coin for shopping cart | You can use this 50 cent piece for a shopping cart | Download free 3D printable STL models | [
"coin",
"shopping",
"shoppingcart",
"shoppingcartcoin",
"50cent"
] | Gadgets > Other Gadgets | [
"155577/images/image_1_compressed.jpg"
] | [
"155577/stls/50 Cent Coin for shopping cart.stl"
] | CC-BY | https://www.printables.com/model/155577 | data_0001.tar |
367266 | 50% Reduced Print Time and Plastic + Separate Models - Complete 3D Printer test all in one (stress test, bed level test, retraction test, calibration test, tolerance test, support test) | <h3><strong>Nearly 50% Reduced Time and Plastic Plus Separate Models for Individual Tests</strong></h3><p> </p><p><strong>All-In-One </strong>From 6h57m to <strong>4h8m </strong>44g of material to <strong>23g of material</strong></p><p> </p><h3><strong>Separate Model Print Times</strong></h3><p> </p><p><... | [
"test",
"calibration",
"torturetest",
"tester",
"testprint",
"testmodel",
"calibrationtest",
"tolerances",
"overhangtest",
"stringing",
"stringingtest",
"diameter",
"bridgingtest",
"tolderancetest"
] | 3D Printers > Test Models | [
"367266/images/image_1_compressed.jpg",
"367266/images/image_2_compressed.jpg",
"367266/images/image_3_compressed.jpg"
] | [
"367266/stls/25mmString Test.stl",
"367266/stls/All-In-One-Less.stl",
"367266/stls/Bridging Test.stl",
"367266/stls/Diameter Test.stl",
"367266/stls/Hole Test.stl",
"367266/stls/Overhang Test.stl",
"367266/stls/Support Test.stl",
"367266/stls/XYZ Test.stl"
] | CC-BY | https://www.printables.com/model/367266 | data_0001.tar |
671222 | 50+ Keychains of moped, scooter, veteran and motorcycle | <p>Hello. I am a <strong>student</strong> from the Czech Republic. My passion is 3d modeling and 3d printing.</p><p>I will be very excited if you <strong>follow me</strong> in my work on social media. It will help me a lot as a student.</p><p><a href="https://www.facebook.com/3Dimensionalprinting">https://www.facebook.... | [
"quad",
"keychain",
"tuning",
"yamaha",
"scooter",
"honda",
"motorcycle",
"kawasaki",
"mustang",
"sparrow",
"veteran",
"piaggio",
"moped",
"jawa",
"babetta",
"stadion",
"simson",
"enduro",
"elektronik",
"pionyr",
"schwalbe",
"velorex",
"parez",
"betka"
] | Art & Design > 2D Plates & Logos | [
"671222/images/image_1_compressed.jpg",
"671222/images/image_2_compressed.jpg",
"671222/images/image_3_compressed.jpg"
] | [
"671222/stls/aprilia tuareg 600.stl",
"671222/stls/Babetta 207.stl",
"671222/stls/Babetta 210 (second).stl",
"671222/stls/Babetta 210 (third).stl",
"671222/stls/Babetta 210 tuning (second).stl",
"671222/stls/Babetta 210 tuning.stl",
"671222/stls/Babetta 210.stl",
"671222/stls/babetta 228.stl",
"6712... | CC-BY | https://www.printables.com/model/671222 | data_0001.tar |
76523 | 500g(1lb) Silica Gel Desiccant Box |
<h3> 500g(1lb) Silica Gel Desiccant Box</h3>
<p>(Updated October 2019 with 1mm thicker sides to make it stronger and easier to print)</p>
<p>Box to contain 500g of colour indicating silica gel for your filament dry box.<br/>
The dimensions without feet are 155mm x 127mm x 40mm.<br/>
The clip on feet secure the lid a... | [
"drybox",
"dessicant",
"desiccant",
"thingiverse",
"silicagel",
"desiccantholder",
"dessicantholder",
"dessicantbox",
"desiccantcontainer",
"desiccantbox",
"silicagelcontainer"
] | 3D Printers > Accessories | [
"76523/images/image_1_compressed.jpg",
"76523/images/image_2_compressed.jpg"
] | [
"76523/stls/large_display_silica_box_76523.stl",
"76523/stls/large_display_silica_box_lid_76523.stl",
"76523/stls/silica_box.stl",
"76523/stls/silica_box_feet.stl",
"76523/stls/silica_box_lid.stl"
] | CC-BY | https://www.printables.com/model/76523 | data_0001.tar |
938523 | 500ml Salomon Soft Flask Bottle Dryer Rack | Made the cross at the top smaller to fit these Salomon Bottles
Increased the length of the pole from 190mm to 215mm
Modified the base to fit two poles | [] | Sports & Outdoor > Outdoor Sports | [
"938523/images/image_1_compressed.jpg"
] | [
"938523/stls/Bottom Double.stl",
"938523/stls/Bottom_1.stl",
"938523/stls/Pole.stl",
"938523/stls/Top.stl"
] | CC-BY | https://www.printables.com/model/938523 | data_0001.tar |
307365 | 5015 Fan Shroud/mount for Sprite Extruder Pro (Heat Sink) | <p><strong>NEW VERSION 3.1 with recessed hex nuts and more clearance for CR-Touch (STL and OBJ formats).</strong><br><br>5015 fan upgrade mount for Ender Sprite Extruder Pro using stock screws. <br><br>There are a few similar designs to this, but I took a little bit of the best aspects of each and combined them fo... | [
"hotendcooling",
"5015blower",
"heatsinkfan",
"spriteextruderpro"
] | 3D Printers > Other Printer Parts & Upgrades | [
"307365/images/image_1_compressed.jpg",
"307365/images/image_2_compressed.jpg",
"307365/images/image_3_compressed.jpg",
"307365/images/image_4_compressed.jpg"
] | [
"307365/stls/5015heatsinkfanupgrade-v.2.stl",
"307365/stls/5015heatsinkfanupgrade-v.2_ALT.stl",
"307365/stls/5015heatsinkfanupgrade-V3.1.stl",
"307365/stls/5015heatsinkfanupgradeV3.1.stl"
] | CC-BY | https://www.printables.com/model/307365 | data_0001.tar |
325125 | 5015 Fan Vibration & rattle killer | <p>simle clip to cancel the rattle and vibration </p> | [
"fan",
"noise",
"5015",
"cancellation",
"cancelation"
] | 3D Printers > Other Printer Parts & Upgrades | [
"325125/images/image_1_compressed.jpg",
"325125/images/image_2_compressed.jpg"
] | [
"325125/stls/5015 rattle v3.stl"
] | CC-BY | https://www.printables.com/model/325125 | data_0001.tar |
356355 | 5015 Parts Fan Mount for Sprite Extruder (Reindeer Shroud) | <p>My take on the 5015 fan blower mount that uses a small angle and better clearance vs dual/tri horn designs out there. This is also not a remix; I designed new horns from scratch and also the mounting system. Included with this build are also two versions of the horns, one with a strip LED holder and one without. I p... | [
"fanduct",
"fanmount",
"5015",
"5015fanduct",
"coolingfan",
"ender3s1",
"ender3s1pro",
"s1pro",
"spriteextruder",
"spriteextruderpro",
"crealitysonicpad",
"5015reindeer",
"crealityenders1",
"crealityenders1pro"
] | 3D Printers > Other Printer Parts & Upgrades | [
"356355/images/image_1_compressed.jpg",
"356355/images/image_2_compressed.jpg",
"356355/images/image_3_compressed.jpg",
"356355/images/image_4_compressed.jpg",
"356355/images/image_5_compressed.jpg",
"356355/images/image_6_compressed.jpg",
"356355/images/image_7_compressed.jpg",
"356355/images/image_8... | [
"356355/stls/Reindeer-G-sensorplate.stl",
"356355/stls/Reindeer-Mount.stl",
"356355/stls/Reindeer-Shroud-Horns.stl",
"356355/stls/Reindeer-Shroud-Horns_LED.stl"
] | CC-BY | https://www.printables.com/model/356355 | data_0001.tar |
811290 | 50cal bullet | <p>This is a 50cal inspired bullet I made in fusion 360 as I'm a real novice at this software be nice please . </p> | [
"bullets",
"50cal"
] | Costumes & Accessories > Props | [
"811290/images/image_1_compressed.jpg",
"811290/images/image_2_compressed.jpg",
"811290/images/image_3_compressed.jpg",
"811290/images/image_4_compressed.jpg",
"811290/images/image_5_compressed.jpg"
] | [
"811290/stls/50cal_Shell.stl",
"811290/stls/50Cal_Slug.stl"
] | CC0 | https://www.printables.com/model/811290 | data_0001.tar |
881093 | 50mL Test Tube Rack (3x3) | <p>The goal was to make a test tube rack that could print on one print bed (MK3S+) to use for our lab. The commercially available options are too expensive for what they are. <br><br>This is easy to assemble with just a pair of pliers, pressing the clips into the slots on the side prints. Take care to... | [] | Learning > Chemistry & Biology | [
"881093/images/image_1_compressed.jpg",
"881093/images/image_2_compressed.jpg",
"881093/images/image_3_compressed.jpg",
"881093/images/image_4_compressed.jpg",
"881093/images/image_5_compressed.jpg",
"881093/images/image_6_compressed.jpg"
] | [
"881093/stls/Test Tube Rack bottom.stl",
"881093/stls/tt rack sides.stl",
"881093/stls/tt rack top and middle.stl"
] | CC-BY | https://www.printables.com/model/881093 | data_0001.tar |
226460 | 50mm Center Finder | <p>50mm Center Finder</p> | [
"tool",
"50mm",
"centerfinder"
] | Hobby & Makers > Tools | [
"226460/images/image_1_compressed.jpg",
"226460/images/image_2_compressed.jpg"
] | [
"226460/stls/centerFinder50mm.stl"
] | CC0 | https://www.printables.com/model/226460 | data_0001.tar |
234805 | 50mm Packing Tape Dispenser |
<p>Fits standard packing tape rolls and will fit rolls 120mm in diameter</p>
<p>Takes 5 countersunk m3 bolts that self tap into the print.</p>
<p>Glue the axle into the hub.</p>
<p>Fill the cavity with something weighty.</p>
<p>For the cutting edge I used a sharpened jigsaw blade and glued it to the print with e6000... | [
"nsfw",
"thingiverse"
] | Household > Office | [
"234805/images/image_1_compressed.jpg",
"234805/images/image_2_compressed.jpg",
"234805/images/image_3_compressed.jpg",
"234805/images/image_4_compressed.jpg",
"234805/images/image_5_compressed.jpg",
"234805/images/image_6_compressed.jpg"
] | [
"234805/stls/Tape_Dispenser_-_axle.stl",
"234805/stls/Tape_Dispenser_-_left.stl",
"234805/stls/Tape_Dispenser_-_right.stl",
"234805/stls/Tape_Dispenser_-_spool.stl"
] | CC-BY | https://www.printables.com/model/234805 | data_0001.tar |
583211 | 50mm Tape Roller | <p>This thing was created by Thingiverse user Estep, and is licensed under cc.</p> | [] | Hobby & Makers > Tools | [
"583211/images/image_1_compressed.jpg",
"583211/images/image_2_compressed.jpg",
"583211/images/image_3_compressed.jpg",
"583211/images/image_4_compressed.jpg",
"583211/images/image_5_compressed.jpg",
"583211/images/image_6_compressed.jpg",
"583211/images/image_7_compressed.jpg"
] | [
"583211/stls/50mmm Tape Roller.stl",
"583211/stls/Blade.stl",
"583211/stls/Brace.stl",
"583211/stls/Cap.stl",
"583211/stls/Left-Frame.stl",
"583211/stls/Right-Frame.stl",
"583211/stls/Roller.stl",
"583211/stls/Spacer.stl",
"583211/stls/Tube.stl"
] | CC0 | https://www.printables.com/model/583211 | data_0001.tar |
64138 | 50mm / 2in Hydroponic Net Cup | <p>50mm net cup for hydroponic plants.</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>FlashForge</p>
<p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Creator Pro</p></div><strong>Rafts:</strong></p>
<p>No</p>
<p><p class="detail-setting supports"><strong>Supports: </strong... | [
"garden",
"growing",
"hydroponics",
"thingiverse",
"hydroponic"
] | Household > Outdoor & Garden | [
"64138/images/image_1_compressed.jpg",
"64138/images/image_2_compressed.jpg",
"64138/images/image_3_compressed.jpg",
"64138/images/image_4_compressed.jpg"
] | [
"64138/stls/netcup-50mm-stackable.stl",
"64138/stls/netcup-50mm.stl"
] | CC-BY | https://www.printables.com/model/64138 | data_0001.tar |
981304 | 52mm Camera Lens Cap | <p>This is a 52mm Camera Lens Cap that i made myself. It does not require any special tools to assemble or bolts. IT is assembled entirely by pressure/friction and it holds really well on my printer. When you try it on your lens be sure that the bottom of the cap is not scratching the lens. You can glue a piece of clot... | [
"camera",
"lens",
"cap",
"olympus",
"nikon",
"canon",
"pentax",
"sony",
"thingiverse",
"52mm",
"anon"
] | Gadgets > Photo & Video | [
"981304/images/image_1_compressed.jpg",
"981304/images/image_2_compressed.jpg",
"981304/images/image_3_compressed.jpg",
"981304/images/image_4_compressed.jpg",
"981304/images/image_5_compressed.jpg"
] | [
"981304/stls/52mm_part1.stl",
"981304/stls/52mm_part2.stl",
"981304/stls/52mm_part3.stl"
] | CC-BY | https://www.printables.com/model/981304 | data_0001.tar |
768745 | 53mm (Elegoo) Cardboard Spool Adapter | <p>Insert for 53mm cardboard filament spools (e.g. Elegoo) to prevent wear and dust when mounted on a spool holder such as the standard Prusa Spool Holder.</p><p> </p><p>This insert is designed to use as little filament as possible - only 2g per insert!</p><p>Because of this please be aware that the part may break... | [
"spool",
"cardboard",
"elegoo",
"cardboardspool"
] | 3D Printers > Accessories | [
"768745/images/image_1_compressed.jpg",
"768745/images/image_2_compressed.jpg"
] | [
"768745/stls/53mm Spool Insert v2.stl"
] | CC0 | https://www.printables.com/model/768745 | data_0001.tar |
348186 | 54mm Breville Portafilter Dosing Funnel | <p>This is a quick remix of the dosing funnel by Josh Hartman that fits 54mm portafilters with 3 tabs.</p><p>Depending on how tight you want the fit, you may need to scale the print to 99% or 98%</p> | [
"54mm",
"breville",
"brevilleportafilter",
"brevillebarista"
] | Household > Kitchen | [
"348186/images/image_1_compressed.jpg"
] | [
"348186/stls/54mm portafilter funnel - no tabs.stl"
] | CC-BY | https://www.printables.com/model/348186 | data_0001.tar |
421630 | 54mm Tamper Station/Base | <p>This is a tamper station inspired by Joe for my Sage/Breville Barista Express machine, which uses a 54mm portafilter. There are two sized a big and a small one.</p> | [
"espresso",
"coffee",
"sage",
"portafilter",
"54mmportafilter",
"54mm",
"breville",
"barista",
"baristaexpress",
"brevilleportafilter",
"brevillebarista"
] | Household > Kitchen | [
"421630/images/image_1_compressed.jpg",
"421630/images/image_2_compressed.jpg",
"421630/images/image_3_compressed.jpg"
] | [
"421630/stls/portastation_big.stl",
"421630/stls/portstation_small.stl"
] | CC-BY | https://www.printables.com/model/421630 | data_0001.tar |
204917 | 550 Cord Quick Loop | <p>Can use this to attach 550 cord to anything without tying a knot! Removes easily enough when needed while staying put under stress. Works great for tents and anything else that can be synched down with 550 cord!</p> | [
"550",
"knot",
"550cord",
"tiedown"
] | Sports & Outdoor > Outdoor Sports | [
"204917/images/image_1_compressed.jpg",
"204917/images/image_2_compressed.jpg",
"204917/images/image_3_compressed.jpg",
"204917/images/image_4_compressed.jpg",
"204917/images/image_5_compressed.jpg",
"204917/images/image_6_compressed.jpg"
] | [
"204917/stls/Sling Keeper v2.stl"
] | CC0 | https://www.printables.com/model/204917 | data_0001.tar |
807883 | 55cm wind turbine scale model | <p>This is a scale version of a wind turbine approximately around 1:100</p><p>The rotor is connected to the nacelle with a 608 bearing<br><br>Print all parts once except for blade print this 3 times.<br>Everything should just press together, although tolerances are tight.</p> | [
"open",
"small",
"model",
"scale",
"electricity",
"engineering",
"railroad",
"trains",
"free",
"electric",
"bearing",
"608",
"energy",
"608bearing",
"rail",
"turbine",
"wind",
"1",
"train",
"generator",
"voltage",
"mill",
"100",
"electrical",
"training",
"scalemodel... | Learning > Engineering | [
"807883/images/image_1_compressed.jpg",
"807883/images/image_2_compressed.jpg"
] | [
"807883/stls/Base.stl",
"807883/stls/Blade.stl",
"807883/stls/Hub.stl",
"807883/stls/Nacelle.stl",
"807883/stls/Tower.stl"
] | CC0 | https://www.printables.com/model/807883 | data_0001.tar |
227844 | 55mm One Piece Lens Cap | <h5>Idea</h5><p>I needed a new lens cap for my lens and tried to challenge myself to desing a one piece one that has built in springs. This is the result of that.</p><h5>Printing</h5><p>The print is fairly self explanatory, just print it with the logo side down without any support. BUT this is a print with close tolera... | [
"lens",
"cap",
"front",
"deckel",
"lenscap",
"55mm",
"55mmlenscap",
"objektiv",
"objektivdeckel"
] | Gadgets > Photo & Video | [
"227844/images/image_1_compressed.jpg",
"227844/images/image_2_compressed.jpg"
] | [
"227844/stls/49mm Lenscap.stl",
"227844/stls/55mm Lenscap.stl",
"227844/stls/55mm Lenscap_1.stl",
"227844/stls/55mm Lenscap_2.stl"
] | CC-BY | https://www.printables.com/model/227844 | data_0001.tar |
59139 | 58mm portafilter funnel | <p>58mm portafilter funnel with a 15mm funnel wall. I found that 15mm was the right height to prevent grounds spilling while breaking up clumps without being too intrusive under the grinder. The slots should fit most portafilters, if they don't fit yours let me know and i'll make that element parametric too. Print this... | [
"espresso",
"coffee",
"portafilter"
] | Household > Kitchen | [
"59139/images/image_1_compressed.jpg",
"59139/images/image_2_compressed.jpg"
] | [
"59139/stls/models - portafilter funnel.stl"
] | CC0 | https://www.printables.com/model/59139 | data_0001.tar |
350320 | 5KG Bearing Spool Holder (eSun) | <p>As there doesn't appear to be any spool holders using bearings in this formfactor which fits 5kg eSun branded rolls, I decided to modify a design and add my own touches to make it easy to switch rolls over with just two pieces.</p><p>Print:<br>1 x frame<br>1 x pipe<br>2 x pipe bearing adaptors (100% infill)</p><p>Bu... | [
"spool",
"holder",
"bearings",
"5kg"
] | 3D Printers > Accessories | [
"350320/images/image_1_compressed.jpg"
] | [
"350320/stls/frame.stl",
"350320/stls/pipe.stl",
"350320/stls/pipe_bearing_adaptor.stl"
] | CC-BY | https://www.printables.com/model/350320 | data_0001.tar |
646353 | 5Kg Spool Roller | <p>Filament spool roller for Zyltech 5kg filament spools.</p><p><strong>Hardware required</strong>:</p><ul><li>4 - m3x16 (or longer) bolts</li><li>4 - 608 bearings</li></ul><p><strong>Print tips</strong>:</p><ul><li>1 - SpoolBase</li><li>2 - SpoolFrame</li><li>2 - SpoolRoller</li></ul><p>No supports required but ... | [
"spool",
"filament",
"spoolholder",
"filamentspoolholder",
"spoolmount",
"filamentspool",
"spoolroller",
"filamentholder",
"spoolstand"
] | 3D Printers > Accessories | [
"646353/images/image_1_compressed.jpg",
"646353/images/image_2_compressed.jpg"
] | [
"646353/stls/SpoolBase.stl",
"646353/stls/SpoolFrame.stl",
"646353/stls/SpoolRoller.stl"
] | CC-BY | https://www.printables.com/model/646353 | data_0001.tar |
728031 | 5L Bottlecap water pump adapter | <p>This is remix of remix bade cap of this thing https://www.thingiverse.com/thing:5884473<br>I just want attach water pump directly and it's fits perfectly.<br>Standart print settings 3 outers 10% infill petg</p> | [
"bottle",
"adapter",
"5l"
] | Household > Kitchen | [
"728031/images/image_1_compressed.jpg",
"728031/images/image_2_compressed.jpg"
] | [
"728031/stls/5l-bottlecap-adapter.stl"
] | CC-BY | https://www.printables.com/model/728031 | data_0001.tar |
700893 | 5min and 1.4g Shopping Cart 1 Euro Token | <p>The Shopping Cart Token has the same dimensions than 1 Euro Coin</p><p><strong>Update:</strong></p><p><i>01.05.2025</i></p><p>I made a stronger Version of the V2 Model and did some minor Tweaks. With 15% Infill you need only 1,72g Filament and with 100% Infill only 1,83g. </p><p><strong>Dimensions V3</strong></... | [
"shopping",
"shoppingcart",
"shoppingcartcoin",
"shoppingtrolleycoin",
"shoppingcarttoken"
] | Household > Other House Equipment | [
"700893/images/image_1_compressed.jpg",
"700893/images/image_2_compressed.jpg"
] | [
"700893/stls/Shopping_Cart_Token_1Euro_V1.stl",
"700893/stls/Shopping_Cart_Token_1Euro_V2.stl",
"700893/stls/Shopping_Cart_Token_1Euro_V3_Strong.stl"
] | GPL3.0 | https://www.printables.com/model/700893 | data_0001.tar |
7914 | 5min Bat Earrings | <p>A simple set of Bat earrings that prints in just under 5min.</p>
<h3>Print instructions</h3><p>0.4mm nozzle, No supports or Rafts needed</p> | [
"earrings",
"bat",
"bats"
] | Seasonal designs > Autumn & Halloween | [
"7914/images/image_1_compressed.jpg",
"7914/images/image_2_compressed.jpg"
] | [
"7914/stls/bat-earings.stl"
] | CC-BY | https://www.printables.com/model/7914 | data_0001.tar |
3249 | 5x6 Switch Tester for MX-Style Key Switches | <p>This is a simple organizer for testing keyboard switches. There are a few improvements that I made over the spartan version that my switch supplier provided. The "plate" area of the sockets is 1.5 mm thick, which is the correct size for plate mounting these switches (this prevents damage and deformation to the switc... | [
"switch",
"keyboard",
"mx",
"cherry",
"kailh",
"gateron"
] | Hobby & Makers > Organizers | [
"3249/images/image_1_compressed.jpg",
"3249/images/image_2_compressed.jpg",
"3249/images/image_3_compressed.jpg"
] | [
"3249/stls/switch-tester.stl"
] | CC-BY | https://www.printables.com/model/3249 | data_0001.tar |
151162 | 5" Sanding Pad Holder | <p>This is a set of 5" sanding pad holders for my 5" random orbit sander. Print with the slots vertical. I suggest printing with a 5-6mm brim to keep the corners from pulling up.</p><h3>Running list of available grits:</h3><h3>40, 50, 60, 80, 100, 120, 150, 180, 220, 240, 320, 400, 600, 800, 1.0K, 1.2K, 1.5K, 2.0K, 3.0... | [
"holder",
"circle",
"sander",
"sanding",
"disk",
"pad",
"thingiverse",
"five",
"disc",
"velcro",
"orbit",
"random",
"5in"
] | Household > Office | [
"151162/images/image_1_compressed.jpg",
"151162/images/image_10_compressed.jpg",
"151162/images/image_11_compressed.jpg",
"151162/images/image_12_compressed.jpg",
"151162/images/image_2_compressed.jpg",
"151162/images/image_3_compressed.jpg",
"151162/images/image_4_compressed.jpg",
"151162/images/imag... | [
"151162/stls/5in Sandpaper Holder 003 - 50 Grit.stl",
"151162/stls/5in_Sandpaper_Holder_003_-_1.0K_Grit.stl",
"151162/stls/5in_Sandpaper_Holder_003_-_1.2K_Grit.stl",
"151162/stls/5in_Sandpaper_Holder_003_-_1.5K_Grit.stl",
"151162/stls/5in_Sandpaper_Holder_003_-_100_Grit.stl",
"151162/stls/5in_Sandpaper_Ho... | CC-BY | https://www.printables.com/model/151162 | data_0001.tar |
146210 | 5/8 Microphone screw with 8mm HEX | <p>no remix, but I think it is easier to find that way.<br>I didn't have a 5/8" screw and didn't know where to get one. If my screw is to long just scale up the ring.</p> | [] | Gadgets > Audio | [
"146210/images/image_1_compressed.jpg"
] | [
"146210/stls/MicroAdapterRing.stl",
"146210/stls/MicroAdapter_5.8.stl",
"146210/stls/MicroAdaptter.stl"
] | CC0 | https://www.printables.com/model/146210 | data_0001.tar |
220241 | 5³ Trash Can | <p>It's a trash can… there are some trash cans here, but they are all circular. This one should be easy to resize to your specific needs, possibly even for usage as a storage container. Walls and base are 2mm thick.</p><p>Put some rubber feet on it to keep it from sliding around.</p> | [
"can",
"filament",
"trashcan",
"waste",
"basket",
"trash",
"disposal",
"wastebasket"
] | Gadgets > Other Gadgets | [
"220241/images/image_1_compressed.jpg"
] | [
"220241/stls/Trashcan v1.stl"
] | CC-BY | https://www.printables.com/model/220241 | data_0001.tar |
60943 | 6 Cell Module Tray (Seed/Plug Tray) | <p>UPDATE: There is now a V2 of these cell trays with an improved design please check out https://www.prusaprinters.org/prints/71854-seedmodulecell-tray-mk2-seedplug-tray</p><p>This 6 cell module tray for starting your seeds, designed to be strong and sturdy so that i can be reused many times, with a large hole in the ... | [
"planter",
"seed",
"tray",
"gardening",
"seedling",
"gardenhose",
"indoorgardening",
"indoorgarden",
"seeds",
"seedstarter",
"outdoorgardening",
"growyourown",
"homegrown",
"plugtray",
"seedtray",
"celltray"
] | Household > Outdoor & Garden | [
"60943/images/image_1_compressed.jpg",
"60943/images/image_2_compressed.jpg",
"60943/images/image_3_compressed.jpg",
"60943/images/image_4_compressed.jpg",
"60943/images/image_5_compressed.jpg",
"60943/images/image_6_compressed.jpg",
"60943/images/image_7_compressed.jpg",
"60943/images/image_8_compres... | [
"60943/stls/6 Cell Seed Tray Air Pruning Version.stl",
"60943/stls/6 Cell Seed Tray.stl",
"60943/stls/6 cell seed wide.stl"
] | CC-BY | https://www.printables.com/model/60943 | data_0001.tar |
685512 | 6 Hook Key hook with Shelf | <p>6 Hook, Key hook with a shelf for your “stuff”</p><p>PLA or PETG</p><p>Supports- No</p><p>Raft - No</p><p>4 Walls</p><p>20% infill of your choice</p><p>Will print on mini, just turn left or right a little to fit</p> | [
"shelf",
"keyhook"
] | Household > Other House Equipment | [
"685512/images/image_1_compressed.jpg",
"685512/images/image_2_compressed.jpg"
] | [
"685512/stls/6 Key Hook with Shelf-2.stl"
] | CC-BY | https://www.printables.com/model/685512 | data_0001.tar |
458326 | 6 inch to 4 inch exhaust hose reducer | <p>I created a DIY airbrush spary booth using two Ikea Samla boxes and a bathroom fan as the exhaust. However, the output of the fan is to a 6 inch hose which did not fit my needs. Therefore I needed a way to reduce the connection size from the 6 inch to the 4 inch exhaust hose I wanted to use. I designed this in tinke... | [
"hose",
"exhaust",
"hoseadapter",
"reducer"
] | Hobby & Makers > Other Ideas | [
"458326/images/image_1_compressed.jpg",
"458326/images/image_2_compressed.jpg",
"458326/images/image_3_compressed.jpg"
] | [
"458326/stls/Hose Reducer.stl"
] | CC-BY | https://www.printables.com/model/458326 | data_0001.tar |
98181 | 6 Player Mexican Train | <p>This is a much nicer 3D version of the classic Mexican Train domino game. The main reason for this design was to save a little space on the small table we play on, so it is more compact (since the dominos sit at an angle) and also fewer players (6 down from 8 since we never have played with 8). I also did not like a... | [
"boardgame",
"domino",
"train",
"locomotive",
"modeltrain",
"mexican",
"nosupport",
"dominoes",
"dominos",
"mexicantrain"
] | Toys & Games > Board Games | [
"98181/images/image_1_compressed.jpg",
"98181/images/image_2_compressed.jpg"
] | [
"98181/stls/Case and Lid.stl",
"98181/stls/Locomotive 1.stl",
"98181/stls/mexican train base.stl"
] | CC-BY | https://www.printables.com/model/98181 | data_0001.tar |
226968 | 6 shot dispenser and holder or 6 glass | <p><a href="https://www.thingiverse.com/thing:832751/files">Thing files for Indispensable Dispenser by Erazmataz - Thingiverse</a></p> | [
"beer",
"holder",
"glass",
"funnel",
"dispenser",
"pourer",
"alcohol",
"shot",
"funnels",
"funnelstand",
"beers",
"weir",
"indispensable"
] | Household > Kitchen | [
"226968/images/image_1_compressed.jpg"
] | [
"226968/stls/6 glass dispenser.stl",
"226968/stls/6 shot dispenser.stl"
] | CC0 | https://www.printables.com/model/226968 | data_0001.tar |
919082 | 6-Alarm Puzzle Box | <p>A high pressure hydrant head-scratcher with multiple hidden compartments.</p><p> </p><h3>Puzzle Solution</h3><figure class="media"><oembed url="https://youtu.be/swrISxBe1C8"></oembed></figure><p><a href="https://youtu.be/swrISxBe1C8">https://youtu.be/swrISxBe1C8</a></p><p> </p><h3>Puzzle Assembly</h3><figu... | [
"puzzle",
"container",
"puzzlebox",
"tricky",
"firehydrant"
] | Toys & Games > Puzzles & Brain-teasers | [
"919082/images/image_1_compressed.jpg"
] | [
"919082/stls/Case Bottom.stl",
"919082/stls/Case Top.stl",
"919082/stls/Core Bottom - Fake Lid.stl",
"919082/stls/Core Bottom - No Hint.stl",
"919082/stls/Core Bottom.stl",
"919082/stls/Core Top - No Hint.stl",
"919082/stls/Core Top.stl",
"919082/stls/Demo - Assembled.stl",
"919082/stls/Demo - Explo... | CC-BY | https://www.printables.com/model/919082 | data_0001.tar |
357790 | 6-Key Macro Keyboard | <p>6-Key Macro Keyboard using a Raspberry Pi Pico to control</p><ul><li>Programmed in <a href="https://docs.circuitpython.org/">CircuitPython</a>. <ul><li>Included python code has macros for freeCAD and Ansys Spaceclaim</li><li>To modify change the keymap dictionaries using new macro <a href="https://docs.circuitp... | [
"keyboard",
"macropad",
"mechanicalkeyboard",
"macrokeyboard"
] | Gadgets > Computers | [
"357790/images/image_1_compressed.jpg"
] | [
"357790/stls/bottom.stl",
"357790/stls/top.stl"
] | CC-BY | https://www.printables.com/model/357790 | data_0001.tar |
100980 | 60 Degree Connector Compatible with LEGO Trains | <p>A 60 degree connector for LEGO train tracks (not DUPLO). Updated with a fixed .STL (this was one of my first designs and there were some small overhangs I hadn't noticed).</p><p>No supports needed, but there are small ones built in at the end of each track that need to be clipped off before this will connect with ot... | [
"trains",
"brick",
"lego",
"train",
"thingiverse"
] | Toys & Games > Building Toys | [
"100980/images/image_1_compressed.jpg"
] | [
"100980/stls/60 degree connector.stl"
] | CC-BY | https://www.printables.com/model/100980 | data_0001.tar |
38204 | 60 degrees heater bed cable cover | <p>Less stress on the wiring and more gap for twisting than shorter model. Slightly longer (9mm) but less prone to insulation melting.</p>
<p>Modified from original Prusa model files. Use with original clip</p>
| [
"cover",
"bed",
"angled",
"degree",
"60",
"degrees"
] | 3D Printers > Other Printer Parts & Upgrades | [
"38204/images/image_1_compressed.jpg",
"38204/images/image_2_compressed.jpg",
"38204/images/image_3_compressed.jpg"
] | [
"38204/stls/heatbed-cable-cover-60.stl"
] | CC0 | https://www.printables.com/model/38204 | data_0001.tar |
500618 | 608 BB Bearing | <p>I didn't like pausing the print to add the BBs. I added in two little cutouts to allow BB's to be put in after printing.</p><p> </p><p>They go in easily enough that it's not a pain, but tough enough that I'm not worried that the bearing might fall apart. I used 10 standard BBs.</p> | [
"bearing",
"608bearing",
"homemade",
"bbbearing",
"homemadebearing"
] | Hobby & Makers > Mechanical Parts | [
"500618/images/image_1_compressed.jpg",
"500618/images/image_2_compressed.jpg"
] | [
"500618/stls/608 BB Bearing.stl"
] | CC-BY | https://www.printables.com/model/500618 | data_0001.tar |
629864 | 608 Bearing Adapter for Airbrush and Painting Turntable | <p>I only had standard 608 (skateboard) bearings so this is an adapter to make them work with the original file.<br> </p><p>The smaller collar is to fit around the peg on the bottom section.<br><br>Printed at 0.2mm layer height, 25% Grid infill, no support or brim necessary.</p> | [] | Hobby & Makers > Other Ideas | [
"629864/images/image_1_compressed.jpg"
] | [
"629864/stls/Adapter_InnerCollar.stl",
"629864/stls/Adapter_Outer.stl"
] | CC0 | https://www.printables.com/model/629864 | data_0001.tar |
158594 | 608 Bearing Case | <p>A 608 bearings case that holds 20 bearings. I didn't like the usual tubes that bearings are stored in because they're not very stackable so I decided to make a box for them. </p><p>There is no hinge so the box can stand on its side too.</p><p> </p><p>I also placed the 608 text all around so one can easily ... | [
"608",
"bearings",
"608bearing",
"608zz",
"608zzbearing",
"608bearings"
] | Hobby & Makers > Organizers | [
"158594/images/image_1_compressed.jpg",
"158594/images/image_2_compressed.jpg",
"158594/images/image_3_compressed.jpg"
] | [
"158594/stls/608 Bearing Bottom Case.stl",
"158594/stls/608 Bearing Top Case.stl"
] | GPL3.0 | https://www.printables.com/model/158594 | data_0001.tar |
270755 | 608 Bearing storage Container | <p>since i didnt want the bearings to get dirty and roll arount i designed that simple container.</p><p>there is space for 10 bearings inside.</p><p>Ive printed it with 0.3mm layer height and a 0.6mm nozzle.</p><p>If you like that model pls consider to give it a like.</p> | [
"bearing",
"608bearing",
"ballbearing",
"608zzbearing",
"rollerbearing",
"7x22x8mmbearing",
"crossrollerbearing"
] | Hobby & Makers > RC & Robotics | [
"270755/images/image_1_compressed.jpg",
"270755/images/image_2_compressed.jpg",
"270755/images/image_3_compressed.jpg"
] | [
"270755/stls/body_608.stl",
"270755/stls/cap_608.stl"
] | CC-BY | https://www.printables.com/model/270755 | data_0001.tar |
66530 | 608 Bearing using BBs | <p>In 1999, I had a BB rifle and bought a box of 6,000 BBs. I didn't use all of the BBs, but I'm glad I kept them around! I needed some 608 bearings to make some additional filament rollers, but all of the bearings I found online didn't work well. This design uses standard Daisy BBs, which are 4.40mm spheres. For those... | [
"bearing",
"608",
"608bearing"
] | Hobby & Makers > Mechanical Parts | [
"66530/images/image_1_compressed.jpg",
"66530/images/image_2_compressed.jpg",
"66530/images/image_3_compressed.jpg",
"66530/images/image_4_compressed.jpg",
"66530/images/image_5_compressed.jpg",
"66530/images/image_6_compressed.jpg"
] | [
"66530/stls/608 Bearing v1- Loose Tolerance.stl",
"66530/stls/608 Bearing v2- Tight Tolerance.stl"
] | CC0 | https://www.printables.com/model/66530 | data_0001.tar |
130034 | 608 Pulley | <p>Very strong pulley that uses a 608 bearing. I designed these to be easily mounted with wood screws and to withstand a lot of weight. They work great with paracord and can be used for a lot of different projects.</p><p><strong>Instructions</strong>: Use infill % and additional perimeters as needed. For assembly slide... | [
"bearing",
"608",
"organization",
"garage",
"608bearing",
"physics",
"pulley",
"garageorganization",
"608bearings",
"physicsexperiment"
] | Hobby & Makers > Other Ideas | [
"130034/images/image_1_compressed.jpg",
"130034/images/image_2_compressed.jpg"
] | [
"130034/stls/608 Pulley Base.stl",
"130034/stls/Updated 608 Pulley Wheel.stl"
] | CC-BY | https://www.printables.com/model/130034 | data_0001.tar |
716572 | 608zz Bearing | <p>Another 608zz bearing that works for my personal use when i am out of metal ones</p><p>PLA stl have bigger tolerance and i print it in PLA</p><p>ABS stl have lower tolerance and is printed in ABS</p><p><strong>Printed on Bambu P1S</strong></p><p><strong>0.2mm layer, 3 walls, 15% infill</strong></p><p> </p> | [
"bearing",
"608",
"608zz",
"zz"
] | Hobby & Makers > Mechanical Parts | [
"716572/images/image_1_compressed.jpg",
"716572/images/image_2_compressed.jpg"
] | [
"716572/stls/608 ABS.stl",
"716572/stls/608 PLA.stl"
] | CC-BY | https://www.printables.com/model/716572 | data_0001.tar |
84197 | 60mm Exhaust Fan Silencer Flowmaster (PSU) Ender3/Neptune[2,3]/Others | <p>Exhaust Fan Silencer that was inspired by the Flowmaster muffler design. I know that it looks kind of hokey, but it's hard to argue with the results. The folks at Flowmaster really know what they are doing with muffler design.</p><p>This Fan Silencer is designed to maximize air flow while providing special baffling ... | [
"fan",
"muffler",
"silencer"
] | 3D Printers > Creality Parts & Upgrades | [
"84197/images/image_1_compressed.jpg"
] | [
"84197/stls/Fan_Flowmaster_2.stl",
"84197/stls/Fan_Flowmaster_2_mirror.stl"
] | CC-BY | https://www.printables.com/model/84197 | data_0001.tar |
271390 | 60mm Fan Guard | <p>Can be installed with 4 x M5 screws</p> | [] | 3D Printers > Other Printer Parts & Upgrades | [
"271390/images/image_1_compressed.jpg",
"271390/images/image_2_compressed.jpg"
] | [
"271390/stls/60mm Fan Guard.stl"
] | CC0 | https://www.printables.com/model/271390 | data_0001.tar |
322751 | 60° Heatbed Cable Cover Remix | <p>Thank you to @rolli-on-fire for the 60° Heatbed Cable Cover</p><p>I like the simple original idea with zip ties to secure the cables. I have made three changes.</p><ol><li>The thin layer of the zip tie surface, which was damaged in the original design, was removed and zip tie holes penetrated to the surface.</li><li... | [
"enclosure",
"ikeaenclosure",
"prusai3mk3",
"heatbedcableholder",
"heatbedcover"
] | 3D Printers > Other Printer Parts & Upgrades | [
"322751/images/image_1_compressed.jpg",
"322751/images/image_2_compressed.jpg",
"322751/images/image_3_compressed.jpg"
] | [
"322751/stls/Reｍix_heatbed_cable_cover.stl"
] | CC-BY | https://www.printables.com/model/322751 | data_0001.tar |
827319 | 64mm Oil Filter Wrench | <p>Needed an oil filter wrench for my Indian Chieftain. Reading online noted it was very difficult to find an actual 64mm wrench (most are 64.7 which is too big to remove the filter). Found garyfain's model but wanted something that I could print without needing support so made this remix. </p><p>I've printed it u... | [
"64mm",
"oilfilterwrench",
"indianmotorcycles",
"chieftain"
] | Hobby & Makers > Automotive | [
"827319/images/image_1_compressed.jpg",
"827319/images/image_2_compressed.jpg",
"827319/images/image_3_compressed.jpg",
"827319/images/image_4_compressed.jpg"
] | [
"827319/stls/Indian 64mm Oil Filter Wrench.stl"
] | CC0 | https://www.printables.com/model/827319 | data_0001.tar |
1419627 | 67 meme | <p>67 meme emblem may need to be scaled up in slicer.</p> | [
"funny",
"meme",
"joke",
"67"
] | Toys & Games > Other Toys & Games | [
"1419627/images/image_1_compressed.jpg"
] | [
"1419627/stls/67 meme.stl"
] | CC0 | https://www.printables.com/model/1419627 | data_0001.tar |
1512813 | 67 Ornament | <p>This is just a simple ornament of the 67 trend.</p><p>It costs about 11.6 grams of filament, and took me ~25 minutes to print.</p><p>The dimensions are 10cm x 5.4cm x 1.3cm (or 3.9in x 2.1in x 0.5in)</p><p></p> | [] | Seasonal designs > Winter & Christmas & New Year's | [
"1512813/images/image_1_compressed.jpg",
"1512813/images/image_2_compressed.jpg",
"1512813/images/image_3_compressed.jpg"
] | [
"1512813/stls/67 Ornament.stl"
] | CC0 | https://www.printables.com/model/1512813 | data_0001.tar |
971320 | 6DoF robot arm | modular | cheap | educational | <figure class="media"><oembed url="https://youtu.be/d-5poqJMQYw"></oembed></figure><p> </p><p>This is a modular system with which many kinematic chains, aka robot arms, can be constructed. <br>The modules can be seen in image 1. The chosen actuators are very cheap servo motors without gearbox, which brings ad... | [
"robot",
"modular",
"arm",
"robotics",
"cheap",
"6dof"
] | Hobby & Makers > RC & Robotics | [
"971320/images/image_1_compressed.jpg",
"971320/images/image_2_compressed.jpg",
"971320/images/image_3_compressed.jpg",
"971320/images/image_4_compressed.jpg",
"971320/images/image_5_compressed.jpg",
"971320/images/image_6_compressed.jpg"
] | [
"971320/stls/base.stl",
"971320/stls/base_rotor.stl",
"971320/stls/base_spacer.stl",
"971320/stls/connector_corner.stl",
"971320/stls/connector_straight.stl",
"971320/stls/connector_straight_shifted.stl",
"971320/stls/driveBig.stl",
"971320/stls/driveBig_rotor.stl",
"971320/stls/driveSmall.stl",
"... | CC0 | https://www.printables.com/model/971320 | data_0001.tar |
324689 | 6min MK3S+ Pin-Support Challenge | <p>It is not my own design it is the <a href="https://fullcontrol.xyz/#/models/67cf20">Pin-Support Challenge</a> by fullcontrol.xyz. <br><strong>Only g-code.</strong></p><p>I modified the start g-code to be the standart prime line and the end g-code to move the bed a bit. The most differece makes the speed increas... | [
"challenge",
"nosupport",
"printertest",
"fullcontrolgcode",
"pinsupportchallenge",
"fullcontrolxyz"
] | 3D Printers > Test Models | [
"324689/images/image_1_compressed.jpg",
"324689/images/image_2_compressed.jpg",
"324689/images/image_3_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/324689 | data_0001.tar |
127951 | 6mm Diameter x 2.75mm Thick Version of "Join PTFE Tubes Together Magnetically" | <p>I made 2 changes to this model to suit my needs:</p><ol><li>I resized the magnet holes for 6mm diameter x 2.75mm thick magnets</li><li>I removed the inner cylinder that (I think) was supposed to fit inside the PC4-M10 couplers. It didn't fit inside my couplers so I just deleted it. I think it is much better now.</li... | [] | 3D Printers > Other Printer Parts & Upgrades | [
"127951/images/image_1_compressed.jpg",
"127951/images/image_2_compressed.jpg",
"127951/images/image_3_compressed.jpg"
] | [
"127951/stls/magnetic PTFE coupler v2.stl",
"127951/stls/magnetic_ptfe_coupler_6mm.stl"
] | CC0 | https://www.printables.com/model/127951 | data_0001.tar |
1373120 | 6mm Knob using Rivet-Nut Insert | <p><strong>6mm Knob using Rivet-Nut Insert, Nut-Sert, or Nut-Cert</strong></p><p>I wanted some knobs that matched the blue CF arm.</p><p> <a href="https://www.bulletpointmountingsolutions.com/">https://www.bulletpointmountingsolutions.com/</a> </p><p>Here is my fix.</p><p>I used 3D Fuel PRO-PCTG (Cobalt Blue... | [
"knob",
"nut",
"clip",
"phone",
"bolt",
"jeep",
"gps",
"rivet",
"retainer",
"6mm",
"jeepjk",
"jeepwrangler",
"mcmaster",
"mcmastercarr",
"cert",
"rivnut",
"nutsert",
"bulletpointmounting",
"netcert"
] | Hobby & Makers > Automotive | [
"1373120/images/image_1_compressed.jpg",
"1373120/images/image_10_compressed.jpg",
"1373120/images/image_11_compressed.jpg",
"1373120/images/image_12_compressed.jpg",
"1373120/images/image_13_compressed.jpg",
"1373120/images/image_14_compressed.jpg",
"1373120/images/image_15_compressed.jpg",
"1373120/... | [
"1373120/stls/6mm_RIV-NUT_knob-shorty_v3_sliced.stl",
"1373120/stls/Optional_Outside_CLAMP_SHELL_v3_sliced.stl",
"1373120/stls/Optional_RIV-NUT-CAP_v3_sliced.stl"
] | CC-BY | https://www.printables.com/model/1373120 | data_0001.tar |
117902 | 6mm Pocket Hole Jig with bearing | <p><strong>Features:</strong><br>• Precise drilling of angled holes<br>• 15<a href="https://www.degreesymbol.net/">°</a> degree angle<br>• Can be clamped in place before drilling<br>• Helpful in creating hidden joinery</p><h3>Print instructions</h3><p><strong>My recommendation:</strong><br>• 0.2mm layer height<br>• 30%... | [
"drill",
"woodworking",
"hobby",
"wood",
"metric",
"cabinet",
"plywood",
"6mm",
"joinery",
"cabinetry"
] | Hobby & Makers > Tools | [
"117902/images/image_1_compressed.jpg",
"117902/images/image_2_compressed.jpg",
"117902/images/image_3_compressed.jpg"
] | [
"117902/stls/Pocket Hole Jig 6mm.stl"
] | CC0 | https://www.printables.com/model/117902 | data_0001.tar |
989597 | 6mm PTFE Tube Mod for Prusa XL | <p>Minimize friction to ease feeding and stress on the nextruder by upping PTFE from 4mm OD to 6mm OD.</p><p>Since I like to use my XL with RepBoxTT underneath to feed spools having less friction on the longer runs is critical and thats why I did this mod.</p><p>Requires switching stock 4mm Festo connector with a PC6-M... | [
"xl",
"prusaxl",
"prusaxlupgrade"
] | 3D Printers > Prusa Parts & Upgrades | [
"989597/images/image_1_compressed.jpg",
"989597/images/image_2_compressed.jpg",
"989597/images/image_3_compressed.jpg"
] | [
"989597/stls/6mm XL Cable Clip.stl",
"989597/stls/dock-cable-router_6mm_R v2.stl",
"989597/stls/dock-cable-router_single_tool_adapter.stl"
] | GPL2.0 | https://www.printables.com/model/989597 | data_0001.tar |
1511900 | 6mm Push Rivet / Panel Clip | <p>This fastener is sized for a 6mm hole, with a 14.1mm head diameter. It can be scaled as needed.<br><br>The model is based on the dimensions of Honda part no. 90683-GR1-003. I used it to attach body panels on a Honda CBR929RR.<br><br>Compared to other 3D printable push rivet designs, this design features:<br>- O... | [
"clip",
"body",
"panel",
"fastener",
"honda",
"rivet",
"push"
] | Hobby & Makers > Automotive | [
"1511900/images/image_1_compressed.jpg"
] | [
"1511900/stls/Rivet Body.stl",
"1511900/stls/Rivet Pin.stl"
] | CC-BY | https://www.printables.com/model/1511900 | data_0001.tar |
131854 | 6mm Shelf Pin | <p>I printed 5 of these to fix some sagging shelves in my house. Printed with a brim due to low adhesion area, all 5 came right out of the support structure, no post processing required.</p> | [
"support",
"pin",
"shelving",
"shelves",
"pins"
] | Household > Other House Equipment | [
"131854/images/image_1_compressed.jpg",
"131854/images/image_2_compressed.jpg",
"131854/images/image_3_compressed.jpg"
] | [
"131854/stls/6mm Shelf Pin.stl"
] | CC0 | https://www.printables.com/model/131854 | data_0001.tar |
571092 | 6U Gridfinity Modular Drawer System | <p>Here is the full set of 6U drawers. I have also included a reduced filament hex model which is the one I have personally verified. It still fits with Walter's system, its just taller!<br><br>Unfortunately I primarily use ABS so experienced extreme warping even with glue and sticking the build-plate down with Kapton ... | [
"hexagon",
"organizer",
"modular",
"drawers",
"gridfinity"
] | Hobby & Makers > Organizers | [
"571092/images/image_1_compressed.jpg",
"571092/images/image_2_compressed.jpg",
"571092/images/image_3_compressed.jpg",
"571092/images/image_4_compressed.jpg"
] | [
"571092/stls/6U Gridfinity Drawer B.stl",
"571092/stls/6U Gridfinity Drawer Box A.stl",
"571092/stls/Gridfinity Drawer Box Hex A.stl"
] | CC-BY | https://www.printables.com/model/571092 | data_0001.tar |
421435 | 6x3mm Magnets 3D Benchy Display Stand | <p>I liked the original benchy stand as it was a great way to show off how my different filaments printed and looked like, but it requires you to glue the pieces together. I didn't like the idea of gluing 3d printed pieces and, once glued, expansion for more benchies becomes tedious or impossible. </p><p>So, I too... | [
"display",
"magnet",
"benchy"
] | 3D Printers > Accessories | [
"421435/images/image_1_compressed.jpg"
] | [
"421435/stls/Benchy Display Base Stl.stl",
"421435/stls/Benchy Display Frame Left Stl.stl",
"421435/stls/Benchy Display Frame Right Stl.stl",
"421435/stls/Benchy Display Module Stl.stl"
] | CC-BY | https://www.printables.com/model/421435 | data_0001.tar |
60371 | 6" Corner Clamp, Right Angle Clamp, Positioning Square (v1.3) | <p>This is a 6" corner brace (for clamping), aka right-angle clamp, aka positioning square.</p><p> </p><p>As requested, there are now four variations: </p><ul><li>A: Sharp corner — measurements on sides (inches & millimeters) right down to zero</li><li>B: Corner nipped — for use even in presence of sawdus... | [
"woodworking",
"clamp",
"carpentry",
"thingiverse",
"square",
"woodworkingtools",
"woodworkingjig",
"carpenter",
"carpenters",
"rightangle",
"carpenterssquare",
"woodworkingtool"
] | Hobby & Makers > Tools | [
"60371/images/image_1_compressed.jpg",
"60371/images/image_2_compressed.jpg",
"60371/images/image_3_compressed.jpg",
"60371/images/image_4_compressed.jpg",
"60371/images/image_5_compressed.jpg"
] | [
"60371/stls/A - 6 Corner Clamp, Right Angle Clamp, Positioning Square (v1.3).stl",
"60371/stls/B - 6 Corner Clamp, Right Angle Clamp, Positioning Square (v1.3).stl",
"60371/stls/C - 6 Corner Clamp, Right Angle Clamp, Positioning Square (v1.3).stl",
"60371/stls/D - 6 Corner Clamp, Right Angle Clamp, Positionin... | CC-BY | https://www.printables.com/model/60371 | data_0001.tar |
381282 | 6" Crescent Wrench holder for HSW | <p>I reworked RostaP's <a href="https://www.printables.com/model/152592-honeycomb-storage-wall/files#preview">caliper holder</a> for the <a href="https://www.printables.com/model/152592-honeycomb-storage-wall">Honeycomb Storage Wall</a> to hold a 6" crescent wrench. It also holds an 8" but you have to adjust the rotati... | [
"spanner",
"crescentwrench"
] | Hobby & Makers > Tools | [
"381282/images/image_1_compressed.jpg",
"381282/images/image_2_compressed.jpg"
] | [
"381282/stls/Crescent Wrench Holder.stl"
] | CC-BY | https://www.printables.com/model/381282 | data_0001.tar |
937651 | 7 Cigarette container with slide cap (V2) | <p>This is a 7 Cigarette container with a slide cap.</p><p><strong>The box should be printed in PLA and the cap in ABS for smooth slide! </strong>Note that if both are PLA the cap slide does not work properly (too stiff).</p><p><strong>The assembly of the cap is made by forcing the cap to slide from the opening hole to... | [
"box",
"container",
"compact",
"utility",
"travel",
"cigar",
"cigarette"
] | 3D Printers > Accessories | [
"937651/images/image_1_compressed.jpg",
"937651/images/image_2_compressed.jpg",
"937651/images/image_3_compressed.jpg",
"937651/images/image_4_compressed.jpg",
"937651/images/image_5_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/937651 | data_0001.tar |
712303 | 7 mm square cabinet key | <p>Couldn't find a key for the lock of my external gas meter cabinet which fits well enough, so I changed the size of the square, and also added a hole to use with a keychain or key holder.</p> | [
"key",
"gas"
] | Household > Other House Equipment | [
"712303/images/image_1_compressed.jpg",
"712303/images/image_2_compressed.jpg"
] | [
"712303/stls/Gas key 7mm square.stl"
] | CC-BY | https://www.printables.com/model/712303 | data_0001.tar |
748908 | 7 St Patrick's Day Earrings | <p>7 St Patrick's Day Earrings</p><p><br>Colored earrings are layered (No AMS needed).</p><p> </p><p>Please "Like", review, follow and upload make.</p><p>I spend a lot of time designing and allow it all to be used for free (including commercially).</p><p>If you'd like to help me out, below are the possible ways. T... | [
"gold",
"patrick",
"4",
"green",
"clover",
"day",
"march",
"lucky",
"17",
"leprechaun",
"st",
"17th",
"4leaf"
] | Fashion > Other Fashion Accessories | [
"748908/images/image_1_compressed.jpg",
"748908/images/image_2_compressed.jpg",
"748908/images/image_3_compressed.jpg",
"748908/images/image_4_compressed.jpg",
"748908/images/image_5_compressed.jpg",
"748908/images/image_6_compressed.jpg"
] | [
"748908/stls/beard and hat - hat.stl",
"748908/stls/clover earring stud.stl",
"748908/stls/clover earring.stl",
"748908/stls/Clover hat combined.stl",
"748908/stls/Clover hat outline.stl",
"748908/stls/Clover Outline earring.stl",
"748908/stls/Hat beard - beard.stl",
"748908/stls/Lucky clover.stl"
] | CC-BY | https://www.printables.com/model/748908 | data_0001.tar |
234224 | 7 Wonders Duel + Pantheon + Agora Organizer | <p>This is a remix of <a href="https://www.thingiverse.com/MaksTinyWorkshop">MaksTinyWorkshop's</a> great organizer <a href="https://www.thingiverse.com/thing:4823311">7 Wonders Duel + extensions</a>. Unfortunately, there are two versions of the base game box, one with outside dimensions of 20.8 x 20.8 cm and ano... | [
"organizer",
"insert",
"boardgameinserts",
"boardgameinsert",
"boardgameorganizer",
"boardgamesinlay",
"boardgameinlay",
"boardgameorganiser"
] | Toys & Games > Board Games | [
"234224/images/image_1_compressed.jpg",
"234224/images/image_2_compressed.jpg",
"234224/images/image_3_compressed.jpg",
"234224/images/image_4_compressed.jpg"
] | [
"234224/stls/7W_Duel_trimmed_insert.stl",
"234224/stls/7W_Duel_trimmed_tray.stl",
"234224/stls/Boite_Jetons.stl",
"234224/stls/Insert_Majeur.stl"
] | CC-BY | https://www.printables.com/model/234224 | data_0001.tar |
999668 | 7-ring gyro spinner fidget | <p> 7 ring fidget ;)</p> | [
"spinner",
"ring",
"fidget"
] | Toys & Games > Other Toys & Games | [
"999668/images/image_1_compressed.jpg",
"999668/images/image_2_compressed.jpg"
] | [
"999668/stls/7+ring+v2.stl"
] | CC0 | https://www.printables.com/model/999668 | data_0001.tar |
292585 | 70mm Hex - Tap or Screw bit box | <p>I designed this box to keep my hex type tapping bits safe. Its designed for taps that are up to 70mm in length, and up to 10mm wide. It is knurled to assist in opening and has a print in place hinge. The gap tolerances are 0.1 mm so make sure to dial in your printer. It can hold 6 bits in total.</p> | [
"hexagonal",
"box",
"storagebox",
"tap",
"hexbit",
"hexscrewdrivertool",
"clamshell"
] | Hobby & Makers > Organizers | [
"292585/images/image_1_compressed.jpg",
"292585/images/image_10_compressed.jpg",
"292585/images/image_11_compressed.jpg",
"292585/images/image_12_compressed.jpg",
"292585/images/image_2_compressed.jpg",
"292585/images/image_3_compressed.jpg",
"292585/images/image_4_compressed.jpg",
"292585/images/imag... | [
"292585/stls/70mm Hex - Tap or Screw bit box v20 flat.stl",
"292585/stls/Tap box v20 Base.stl",
"292585/stls/Tap box v20 Cover.stl"
] | CC-BY | https://www.printables.com/model/292585 | data_0001.tar |
539129 | 70x70x100 Container with HSW Adapter | <p>Someone needed the <a href="https://www.printables.com/model/370063-holdercontainer">original container</a> with an adapter for the great <a href="https://www.printables.com/model/152592-honeycomb-storage-wall">HSW</a>, so I added some with my rather limited modelling knowledge ;-)</p><p>Added models with the HSW at... | [
"honeycomb",
"basket",
"honeycombstoragewall",
"hsw"
] | Hobby & Makers > Organizers | [
"539129/images/image_1_compressed.jpg"
] | [
"539129/stls/Holder HSW 70x70x100 - default.stl",
"539129/stls/Holder HSW 70x70x100 - middle.stl",
"539129/stls/Holder HSW 70x70x100 - top.stl"
] | CC0 | https://www.printables.com/model/539129 | data_0001.tar |
52113 | 75x150mm sanding block | <p>Made for 75mm wide sandpaper.</p>
<h3>Print instructions</h3><p>3-4 perimeters<br/>
15% infill</p> | [] | Hobby & Makers > Tools | [
"52113/images/image_1_compressed.jpg",
"52113/images/image_2_compressed.jpg"
] | [
"52113/stls/75x150mm-sanding-block.stl"
] | CC0 | https://www.printables.com/model/52113 | data_0001.tar |
309144 | 79:1 Harmonic Drive for Keen-One EQ | <h3>Harmonic Drive for Keen-One EQ</h3><p>This is a variant with finer teeth (module 0.5) and can be printed without supports.<br>The CircularSpline has 160T, the FlexSpline has 158T.<br>The gear ratio is <strong>79:1</strong></p><p>With the 17HS15-1684S-PG27 from OMC Stepperonline, the transmission ratio is <strong>21... | [
"mount",
"gear",
"astronomy",
"astrophotography",
"drive",
"strain",
"waveshare",
"astronomytelescope",
"harmonic",
"harmonicdrive",
"equatorial",
"strainwavegear",
"flexspline",
"wavegenerator",
"circularspline"
] | Learning > Physics & Astronomy | [
"309144/images/image_1_compressed.jpg",
"309144/images/image_10_compressed.jpg",
"309144/images/image_11_compressed.jpg",
"309144/images/image_12_compressed.jpg",
"309144/images/image_13_compressed.jpg",
"309144/images/image_14_compressed.jpg",
"309144/images/image_15_compressed.jpg",
"309144/images/i... | [
"309144/stls/158T_Flexspline_V2_02.stl",
"309144/stls/158T_Flexspline_V3.stl",
"309144/stls/158T_Flexspline_V5.stl",
"309144/stls/160T_CircularSpline.stl",
"309144/stls/AssemblyHelper_V5.stl",
"309144/stls/Coupler_V5.stl",
"309144/stls/Flexspline_Bearing.stl",
"309144/stls/WaveGenarator_A_V3.1.stl",
... | GPL2.0 | https://www.printables.com/model/309144 | data_0001.tar |
49601 | 7" Touchscreen case for Raspberry Pi 3 (B/B+) + internal fan | <h3><a href="https://www.printables.com/model/1377047-raspberry-pi-touch-display-2-case"><strong>*** New case for Raspberry Pi Touch Display 2 ***</strong></a></h3><p>Required models from <a href="https://www.printables.com/model/44218-7-touchscreen-case-for-raspberry-pi-4-internal-fan">7" Touchscreen case for Raspberr... | [
"case",
"fan",
"raspberry",
"raspberrypi",
"raspberrypicase",
"touchscreen",
"raspberrypi3",
"coolingfan",
"raspberrypi3case",
"40mmfan",
"threadedinsert",
"raspberrypitouchscreen",
"7touchscreen",
"pitouchscreen",
"touchscreencase"
] | Hobby & Makers > Electronics | [
"49601/images/image_1_compressed.jpg",
"49601/images/image_2_compressed.jpg",
"49601/images/image_3_compressed.jpg"
] | [
"49601/stls/rpi3-case-bottom.stl",
"49601/stls/rpi3-case-top.stl"
] | CC-BY | https://www.printables.com/model/49601 | data_0001.tar |
44218 | 7" Touchscreen case for Raspberry Pi 4 + internal fan | <p>Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 4</p><h3><a href="https://www.printables.com/model/1377047-raspberry-pi-touch-display-2-case"><strong>*** New case for Raspberry Pi Touch Display 2 ***</strong></a></h3><h3>Updates</h3><ul><li>Alternative top case part with additional slot for camera ribbon cable... | [
"case",
"fan",
"raspberry",
"raspberrypi",
"raspberrypicase",
"raspberrypi4",
"touchscreen",
"coolingfan",
"raspberrypi4bcase",
"40mmfan",
"threadedinsert",
"7touchscreen",
"pitouchscreen",
"raspberrytouchscreen",
"touchscreencase"
] | Hobby & Makers > Electronics | [
"44218/images/image_1_compressed.jpg",
"44218/images/image_2_compressed.jpg",
"44218/images/image_3_compressed.jpg",
"44218/images/image_4_compressed.jpg"
] | [
"44218/stls/rpi4-case-bottom.stl",
"44218/stls/rpi4-case-top.stl",
"44218/stls/rpi4-case-top_v2.stl",
"44218/stls/rpi4-display-case.stl",
"44218/stls/rpi4-fanmount.stl",
"44218/stls/rpi4-stand-left.stl",
"44218/stls/rpi4-stand-right.stl",
"44218/stls/rpi4-stand.stl"
] | CC-BY | https://www.printables.com/model/44218 | data_0001.tar |
329567 | 8 bit Super Mario Bros star xmas tree topper | <p>CADed this up, printed mine with esun black and yellow, and prusament orange in PETG on my Klipperised Mega X, whilst klipperising my Prusa Mini+.</p> | [] | Seasonal designs > Winter & Christmas & New Year's | [
"329567/images/image_1_compressed.jpg",
"329567/images/image_2_compressed.jpg"
] | [
"329567/stls/8 bit Super Mario Bros tree topper improved.stl",
"329567/stls/8 bit Super Mario Bros tree topper thinner hollowed back.stl",
"329567/stls/8 bit Super Mario Bros tree topper thinner.stl",
"329567/stls/8 bit Super Mario Bros tree topper.stl"
] | CC-BY | https://www.printables.com/model/329567 | data_0001.tar |
653091 | 8 core puzzle cylinder | [] | Toys & Games > Puzzles & Brain-teasers | [
"653091/images/image_1_compressed.jpg"
] | [
"653091/stls/puzzlebox-8m-3N-3H-10b-10c-50h-1B6-0G4-1w2-2t-3z-1M-5X-0p7-0g4-7s-2r-1R333333-e-Z-1T-0y1-0Z2.stl"
] | CC0 | https://www.printables.com/model/653091 | data_0001.tar | |
420130 | 8 Inch Sony PVM and BVM Stand | <p>Print as shown in the picture. PETG is recommended with 4or5 perimeters and 25% infill. Use 100% for the small ledge at the very back (or top as positioned in your slicer).</p><p>We can only confirm compatibility with our own BVM-8045QD. However, so far it seems all 8" PVMs follow that same footprint.</p> | [
"retrogaming",
"sony",
"bvm",
"pvm"
] | Gadgets > Computers | [
"420130/images/image_1_compressed.jpg",
"420130/images/image_2_compressed.jpg",
"420130/images/image_3_compressed.jpg"
] | [
"420130/stls/BVM Stand v8.stl"
] | CC-BY | https://www.printables.com/model/420130 | data_0001.tar |
340444 | 8 Xmas Trees cookie cutter | <p>Cutting eight Xmas Trees cookies at a time will make your cookie production more efficient. The amount of leftover dough that needs to be reused between batches will be less. And finally, the dough will be kept at the ideal temperature because it will require less handling.</p><p>Printing features:<br>- 0.6mm nozzle... | [
"cookiecutters"
] | Seasonal designs > Winter & Christmas & New Year's | [
"340444/images/image_1_compressed.jpg",
"340444/images/image_2_compressed.jpg",
"340444/images/image_3_compressed.jpg",
"340444/images/image_4_compressed.jpg",
"340444/images/image_5_compressed.jpg",
"340444/images/image_6_compressed.jpg"
] | [
"340444/stls/8XmasTreeCutter.stl"
] | CC-BY | https://www.printables.com/model/340444 | data_0001.tar |
1168960 | 8-Bit Heart Earrings | <p>8-bit heart earrings. They measure about 20x20mm</p> | [
"earrings"
] | Fashion > Women | [
"1168960/images/image_1_compressed.jpg"
] | [
"1168960/stls/Heart Earring.stl"
] | CC-BY | https://www.printables.com/model/1168960 | data_0001.tar |
439128 | 8-Bit Mario Star Tree Topper | <p>For my <a href="https://www.thingiverse.com/thing:2701413">printed christmas tree</a> I wanted a simple tree topper to make it bright and fun, and seeing as that printing your own christmas tree is already quite geeky I though that a 8-bit Mario star would work great.</p>
<hr/>
<p>Don't have a printer yourself? Cont... | [
"christmas",
"8bit",
"mario",
"star",
"topper",
"supermario",
"supermariobros",
"snes",
"tree",
"thingiverse",
"christmasornament",
"christmasdecoration",
"christmastree",
"treetopper",
"christmasornaments",
"christmastreeornament",
"treeornament",
"christmastreetopper",
"mariost... | Household > Home Decor | [
"439128/images/image_1_compressed.jpg",
"439128/images/image_2_compressed.jpg",
"439128/images/image_3_compressed.jpg"
] | [
"439128/stls/8-Bit_Mario_Star.stl"
] | CC-BY | https://www.printables.com/model/439128 | data_0001.tar |
75574 | 8020 15-series bracket collection | <p>This is a set of some commonly used connectors with the 15-series 8020 bar. Components:</p><p>4301, 4-hole inside corner bracket (this one is a bit bendy, consider the gusseted version)<br>4302, 2-hole inside corner bracket<br>4307, 2-hole flat plate<br>4332, 2-hole gusseted inside corner bracket<br>4336, 4-hole gus... | [
"bracket",
"connector",
"thingiverse",
"8020"
] | Learning > Engineering | [
"75574/images/image_1_compressed.jpg",
"75574/images/image_10_compressed.jpg",
"75574/images/image_11_compressed.jpg",
"75574/images/image_2_compressed.jpg",
"75574/images/image_3_compressed.jpg",
"75574/images/image_4_compressed.jpg",
"75574/images/image_5_compressed.jpg",
"75574/images/image_6_compr... | [
"75574/stls/8020_15-series_2-hole_T-nut_1_4-20_tap.stl",
"75574/stls/8020_15-series_2-hole_T-nut_5_16-18_tap.stl",
"75574/stls/8020_15-series_T-nut_1_4-20_tap.stl",
"75574/stls/8020_15-series_T-nut_5_16-18_tap.stl",
"75574/stls/8020_4301_4-hole_inside_corner_bracket.stl",
"75574/stls/8020_4302_2-hole_corn... | CC-BY | https://www.printables.com/model/75574 | data_0001.tar |
64830 | 8020 Extrusion - Cable clip | <p>I mostly print this on 0.25 draft in prusa slicer. No infill to make the clip more bendable. Just push the sides together and push in the extrusion. Then click the inner towards the extrusion to make the click. Perfect for cable management around you sim rig or any 8020 extrusion.<br><br>Only tested on 8020 profiles... | [
"8020",
"aluminiumprofile",
"aluminiumextrusion"
] | Hobby & Makers > Organizers | [
"64830/images/image_1_compressed.jpg"
] | [
"64830/stls/8020 - cable clip.stl"
] | CC0 | https://www.printables.com/model/64830 | data_0001.tar |
276025 | 80mm Fan Cover - High Flow | This is a variation on a great design I liked that made that made a little too much noise. This one is silent, enjoy, | Download free 3D printable STL models | [
"fan",
"grill",
"vent",
"fancover",
"fangrill",
"80mmfangrill",
"80mmfan",
"80mm",
"louvre",
"highflow"
] | 3D Printers > Accessories | [
"276025/images/image_1_compressed.jpg",
"276025/images/image_2_compressed.jpg",
"276025/images/image_3_compressed.jpg",
"276025/images/image_4_compressed.jpg",
"276025/images/image_5_compressed.jpg"
] | [
"276025/stls/80mm fan cover high flow.stl"
] | CC0 | https://www.printables.com/model/276025 | data_0001.tar |
481874 | 80mm fan grill | <p>The walls of the hex grid are 0,4mm exactly so scaling down might get ugly.</p><p>Can of course be scaled up to fit other fan sizes.</p><p>Has somewhat good airflow left in my print (make sure not to over extrude the hex gird).</p><p> </p><p>Happy printing</p> | [
"guard",
"fan",
"fanguard",
"fangrill",
"80mmfan",
"80mm"
] | Gadgets > Computers | [
"481874/images/image_1_compressed.jpg",
"481874/images/image_2_compressed.jpg",
"481874/images/image_3_compressed.jpg"
] | [
"481874/stls/80mm fangrill.stl"
] | CC-BY | https://www.printables.com/model/481874 | data_0001.tar |
799529 | 81mm Mortar Prop | <p>The model is updated with better fit screws.</p><p> </p><p>A replica 81mm mortar ‘roughly’ to scale.</p><p> </p><p>no hardware needed, just some glue.</p><p> </p><p>Those savvy enough will notice certain pieces are not consistent with the same specific round (The fuse and body are from different round... | [
"prop",
"mortar"
] | Costumes & Accessories > Props | [
"799529/images/image_1_compressed.jpg",
"799529/images/image_2_compressed.jpg",
"799529/images/image_3_compressed.jpg",
"799529/images/image_4_compressed.jpg"
] | [
"799529/stls/bodybottom.stl",
"799529/stls/bodytop.stl",
"799529/stls/bottombodym821_new.stl",
"799529/stls/fuse.stl",
"799529/stls/fusem821_new.stl",
"799529/stls/primer.stl",
"799529/stls/tail.stl",
"799529/stls/tailfinm821_new.stl",
"799529/stls/topbodym821_new.stl"
] | CC-BY | https://www.printables.com/model/799529 | data_0001.tar |
466284 | 84mm Ball Bearing | <p>No assembly. Recommend you use supports on the build plate. Some rollers may stick slightly after printing but break free with a little pressure. The more you use the bearing the smoother the rollers become as residual support material is difficult to remove completely.</p><p>It is a fun fidget toy... | [
"fidget",
"bearing"
] | 3D Printers > Test Models | [
"466284/images/image_1_compressed.jpg"
] | [
"466284/stls/84mm Ball Bearing.stl"
] | CC0 | https://www.printables.com/model/466284 | data_0001.tar |
900290 | 8BitDo Controller Stand | <p>Stand for the 8Bitdo Ultimate C wireless controller. The base of the stand can be used to display the trinket keychain that comes with the controller, or the charging cable/USB dongle.</p> | [
"holder",
"stand",
"controller",
"8bitdo"
] | Gadgets > Video Games | [
"900290/images/image_1_compressed.jpg",
"900290/images/image_2_compressed.jpg"
] | [
"900290/stls/8bitdo-controller-holder.stl"
] | CC-BY | https://www.printables.com/model/900290 | data_0001.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.