model_id stringlengths 1 7 | name stringlengths 1 169 | description stringlengths 0 38.2k | tags listlengths 0 284 | printables_category stringclasses 76
values | image_paths listlengths 0 62 | gcode_paths listlengths 1 10 | license stringclasses 8
values | source stringlengths 34 40 | shard_file stringclasses 711
values |
|---|---|---|---|---|---|---|---|---|---|
311736 | Ikea Skadis hot air heat gun holder | <p>This holder for a hot air gun on Ikea Skadis pegboard can be printed with minimal supports due to its hexagonal shaped arms. (Supports only needed on small hooks for mounting to Skadis board)</p><p>For a cooler lock, I added a heat gun logo :)</p><p>Works for Mannesmann heat gun, but should also work for similar one... | [
"ikea",
"holder",
"mount",
"gun",
"pegboard",
"heat",
"skadis",
"halter",
"heatgun",
"mannesmann"
] | Hobby & Makers > Organizers | [
"311736/images/heat_gun_holder.jpg",
"311736/images/heat_gun_picture.jpg",
"311736/images/heat_gun_holder_view.jpg",
"311736/images/heat_gun_holder_supports.jpg"
] | [
"311736/gcode/heat_gun_holder__v0.gcode",
"311736/gcode/heat_gun_holder__v1.gcode",
"311736/gcode/heat_gun_holder__v2.gcode",
"311736/gcode/heat_gun_holder__v3.gcode",
"311736/gcode/heat_gun_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/311736 | gcodes_0487.tar |
311713 | Mars Organizer Box Divider | [
"box",
"organizer",
"divider",
"mars",
"separator",
"svratka"
] | Hobby & Makers > Organizers | [
"311713/images/img_2668.jpg"
] | [
"311713/gcode/Mars Organizer Box Divider__v0.gcode",
"311713/gcode/Mars Organizer Box Divider__v1.gcode",
"311713/gcode/Mars Organizer Box Divider__v2.gcode",
"311713/gcode/Mars Organizer Box Divider__v3.gcode",
"311713/gcode/Mars Organizer Box Divider__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/311713 | gcodes_0487.tar | |
311705 | Refilled Cafissimo pod cover | <p>Cover for the Cafissimo pods for when you want to refill them and not waste aluminum foil for a cover.</p><p>Print in PETG or ABS as PLA would definitely deform after one use.</p><p>Make sure to enable “Print Thin Walls” in Cura, Prusaslicer seems to handle this by default.</p> | [
"espresso",
"coffee",
"espressomachine",
"cafissimo",
"coffeepod"
] | Household > Kitchen | [
"311705/images/img_e1854.jpg"
] | [
"311705/gcode/Cafissimo_lid__v0.gcode",
"311705/gcode/Cafissimo_lid__v1.gcode",
"311705/gcode/Cafissimo_lid__v2.gcode",
"311705/gcode/Cafissimo_lid__v3.gcode",
"311705/gcode/Cafissimo_lid__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/311705 | gcodes_0487.tar |
311617 | Ball holder | <p>Ball holder reinforced remix for “Playing Ball Wall Mount”</p> | [
"holder",
"ball",
"wallmount",
"football"
] | Sports & Outdoor > Outdoor Sports | [
"311617/images/20221106_143548.jpg",
"311617/images/20221106_143248.jpg"
] | [
"311617/gcode/Football-holder__v0.gcode",
"311617/gcode/Football-holder__v1.gcode",
"311617/gcode/Football-holder__v2.gcode",
"311617/gcode/Football-holder__v3.gcode",
"311617/gcode/Football-holder__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/311617 | gcodes_0487.tar |
311577 | AR Wall Mount V.2 | [
"display",
"wall",
"cable",
"duty",
"heavy",
"it",
"mount",
"diy",
"lock",
"storage",
"gun",
"id",
"rack",
"printable",
"handy",
"shotgun",
"do",
"rifle",
"airsoft",
"magazine",
"ar",
"bullets",
"lockable",
"magwell",
"yourself",
"scattergun"
] | Art & Design > Wall-mounted | [
"311577/images/20221106_091315.jpg"
] | [
"311577/gcode/AR_Mount_2__v0.gcode",
"311577/gcode/AR_Mount_2__v1.gcode",
"311577/gcode/AR_Mount_2__v2.gcode",
"311577/gcode/AR_Mount_2__v3.gcode",
"311577/gcode/AR_Mount_2__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/311577 | gcodes_0487.tar | |
311534 | Landscape Phone Stand (Remix) | <p>I increased the back triangles length, and added hexagon-shaped holes to decrease the filament consumption. Thanks to this, you can place it to softer surfaces like a bed.</p><p>This is designed to place the phone in landscape orientation, so there is no holes for usb cable.</p><p>Recommended print settings:</p><ul>... | [
"holder",
"stand",
"phone"
] | Gadgets > Portable Devices | [
"311534/images/img_20221106_151441.jpg",
"311534/images/img_20221106_151452.jpg"
] | [
"311534/gcode/landscape_phone_stand_remix__v0.gcode",
"311534/gcode/landscape_phone_stand_remix__v1.gcode",
"311534/gcode/landscape_phone_stand_remix__v2.gcode",
"311534/gcode/landscape_phone_stand_remix__v3.gcode",
"311534/gcode/landscape_phone_stand_remix__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/311534 | gcodes_0487.tar |
311508 | LED Clip for WS2815 IP67 | <p>It's a small clip for mounting the LED Strip to a Wall or Ceiling. I designed it for the WS2815 IP67 LEDs. It's nothing special, nor did it need any big Work for designing it. It works and gets its Job done. <br><br>I would recommend to print it with a brim. In particular if you want to print multiplies at once... | [
"led",
"ledmount",
"ledstrip",
"ledclip"
] | Hobby & Makers > Electronics | [
"311508/images/led_clipper_3dmodel_1.jpg",
"311508/images/img_20221104_125019.jpg",
"311508/images/img_20221104_125047.jpg",
"311508/images/led_clipper_3dmodel.jpg"
] | [
"311508/gcode/LEDClipper_V1__v0.gcode",
"311508/gcode/LEDClipper_V1__v1.gcode",
"311508/gcode/LEDClipper_V1__v2.gcode",
"311508/gcode/LEDClipper_V1__v3.gcode",
"311508/gcode/LEDClipper_V1__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/311508 | gcodes_0487.tar |
311458 | Light Remote Holder Paulmann | <p>I've used some glue strips to attach it to the wall. STEP file is included if you want to make changes, eg. holes for screwing it onto something.</p> | [] | Household > Other House Equipment | [
"311458/images/pxl_20221106_105338916.jpg",
"311458/images/pxl_20221106_105304614.jpg",
"311458/images/pxl_20221106_105425468mp.jpg"
] | [
"311458/gcode/lsholder__v0.gcode",
"311458/gcode/lsholder__v1.gcode",
"311458/gcode/lsholder__v2.gcode",
"311458/gcode/lsholder__v3.gcode",
"311458/gcode/lsholder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/311458 | gcodes_0487.tar |
311383 | mini formula1 f1 | [] | Toys & Games > Action Figures & Statues | [
"311383/images/tempimagetmwezk.jpg",
"311383/images/tempimagerr2zj5.jpg"
] | [
"311383/gcode/FMicro_F1_v2__v0.gcode",
"311383/gcode/FMicro_F1_v2__v1.gcode",
"311383/gcode/FMicro_F1_v2__v2.gcode",
"311383/gcode/FMicro_F1_v2__v3.gcode",
"311383/gcode/FMicro_F1_v2__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/311383 | gcodes_0487.tar | |
311379 | Headphone Hanger | <p>Needed something sturdy and wide enough for my headphones that could be mounted beneath my desk and also give plenty of support to the headrest.</p><p>Can be printed in PLA or PETG, my first one I printed in PETG with 100% infill and that came out almost unnecessarily strong.</p><p>No supports or anything like that ... | [
"headphonestand",
"headphonehanger",
"headphonesstand",
"headphonesholder",
"headphoneshook"
] | Gadgets > Audio | [
"311379/images/db9c3037-6165-4d05-8d33-0d10f819fece.jpg",
"311379/images/cb04d722-2a39-4cb0-909b-4cb64505c075.jpg",
"311379/images/44584e9d-7a90-4826-8310-ac5a9fdcef4c.jpg"
] | [
"311379/gcode/Headphone_Hanger__v0.gcode",
"311379/gcode/Headphone_Hanger__v1.gcode",
"311379/gcode/Headphone_Hanger__v2.gcode",
"311379/gcode/Headphone_Hanger__v3.gcode",
"311379/gcode/Headphone_Hanger__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/311379 | gcodes_0487.tar |
311361 | Picatinny Rail Drawer Handle | <p>A rugged appearance is cool handle. Fasten with two screws.</p><p><strong>Print Settings:</strong></p><ul><li>Material: PLA</li><li>Layer height: 0.30mm</li><li>Supports: no</li><li>Perimeters: 3</li><li>Infill: 20%</li></ul><p><strong>My Other Handles:</strong><br><a href="https://www.printables.com/@BaGooN/collect... | [
"handlebar",
"drawerhandle",
"cabinethandle"
] | Household > Other House Equipment | [
"311361/images/img_20221107_174814.jpg",
"311361/images/img_20221107_174454.jpg",
"311361/images/img_20221107_210610.jpg"
] | [
"311361/gcode/PicatinnyRailHandle__v0.gcode",
"311361/gcode/PicatinnyRailHandle__v1.gcode",
"311361/gcode/PicatinnyRailHandle__v2.gcode",
"311361/gcode/PicatinnyRailHandle__v3.gcode",
"311361/gcode/PicatinnyRailHandle__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/311361 | gcodes_0487.tar |
311358 | Sharpie / Acrylic Pen Set Organizer | <p>I made this pen organizer to hold this set of 42 Acrylic Pens sold on Amazon:</p><p><a href="https://www.amazon.co.uk/gp/product/B07NSMZKQL/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1">https://www.amazon.co.uk/gp/product/B07NSMZKQL/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1</a></p><p>The holes in ... | [
"organizer",
"holder",
"pen",
"penholder"
] | Hobby & Makers > Organizers | [
"311358/images/314418963_1335569263848183_6170644509808115147_n.jpg"
] | [
"311358/gcode/Acrylic Pen Set Holder__v0.gcode",
"311358/gcode/Acrylic Pen Set Holder__v1.gcode",
"311358/gcode/Acrylic Pen Set Holder__v2.gcode",
"311358/gcode/Acrylic Pen Set Holder__v3.gcode",
"311358/gcode/Acrylic Pen Set Holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/311358 | gcodes_0487.tar |
311310 | Multi Remote holder | <p>I would have printed it but I am out of filament still</p> | [
"remoteholder"
] | Household > Living Room | [
"311310/images/screenshot_4.jpg",
"311310/images/screenshot_5.jpg",
"311310/images/screenshot_3.jpg"
] | [
"311310/gcode/Multi Remote Holder__v0.gcode",
"311310/gcode/Multi Remote Holder__v1.gcode",
"311310/gcode/Multi Remote Holder__v2.gcode",
"311310/gcode/Multi Remote Holder__v3.gcode",
"311310/gcode/Multi Remote Holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/311310 | gcodes_0487.tar |
311294 | Holster for Glock 17 | [
"glock",
"glock17"
] | Fashion > Other Fashion Accessories | [
"311294/images/screenshot-854.jpg"
] | [
"311294/gcode/holster+mount (1)__v0.gcode",
"311294/gcode/holster+mount (1)__v1.gcode",
"311294/gcode/holster+mount (1)__v2.gcode",
"311294/gcode/holster+mount (1)__v3.gcode",
"311294/gcode/holster+mount (1)__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/311294 | gcodes_0487.tar | |
311282 | Wall Mounted Titebond Glue Bottle Holder | <p>Sturdy wall-mounted holder for two (2) 16oz Titebond glue bottles.</p><p> </p> | [
"glue",
"workshop",
"woodworking",
"wood",
"woodworkingtools",
"workshoporganization",
"titebond"
] | Hobby & Makers > Tools | [
"311282/images/pxl_20221106_044443157.jpg",
"311282/images/pxl_20221106_044516492night.jpg"
] | [
"311282/gcode/Titebond Glue Holder__v0.gcode",
"311282/gcode/Titebond Glue Holder__v1.gcode",
"311282/gcode/Titebond Glue Holder__v2.gcode",
"311282/gcode/Titebond Glue Holder__v3.gcode",
"311282/gcode/Titebond Glue Holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/311282 | gcodes_0487.tar |
311258 | ADXL345 BLTouch mount for Ender 3 v2 | <p><strong>USE AT YOUR OWN RISK</strong> - Sounds a little dramatic, however if you use this mount then the end-stop switch will no longer trigger. Instead, the ADXL will crash into the motor cover.</p><p>To work around this, I just triggered the end stop myself when the print head was close. I only used this for tunin... | [
"accelerometer",
"bltouch",
"adxl345",
"adxl345mount"
] | 3D Printers > Creality Parts & Upgrades | [
"311258/images/pxl_20221106_012649088.jpg",
"311258/images/pxl_20221106_012657665.jpg",
"311258/images/pxl_20221106_033023474.jpg"
] | [
"311258/gcode/ADXL-BLTouch-Mount__v0.gcode",
"311258/gcode/ADXL-BLTouch-Mount__v1.gcode",
"311258/gcode/ADXL-BLTouch-Mount__v2.gcode",
"311258/gcode/ADXL-BLTouch-Mount__v3.gcode",
"311258/gcode/ADXL-BLTouch-Mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/311258 | gcodes_0488.tar |
311171 | ModiBot converse shoes | <p>Copy and mirror one in the slicer to get the pair.</p> | [
"sneakers",
"shoes",
"doll",
"puppet",
"armature"
] | Art & Design > Other Art & Designs | [
"311171/images/p1050659.jpg"
] | [
"311171/gcode/armat_shoe2__v0.gcode",
"311171/gcode/armat_shoe2__v1.gcode",
"311171/gcode/armat_shoe2__v2.gcode",
"311171/gcode/armat_shoe2__v3.gcode",
"311171/gcode/armat_shoe2__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/311171 | gcodes_0488.tar |
310980 | Anycubic Vyper ADXL345 Hotend Mount Klipper | <p>This is a ADXL345 hotend mount for the Anycubic Vyper to make use of Klipper's Input Shaping automatic calibration. The Vyper seems to have a unique positioning for the hotend, and I couldn't find anything to fit it, so I'm uploading what I created in F365. I would recommend using something stronger than PLA. In thi... | [
"klipper",
"adxl345",
"adxl345mount",
"anycubicvyper",
"vyper",
"vyperklipper"
] | 3D Printers > Anycubic Parts & Upgrades | [
"310980/images/20221028_165918.jpg",
"310980/images/20221028_165924.jpg",
"310980/images/20221028_170007.jpg",
"310980/images/20221028_165937.jpg"
] | [
"310980/gcode/vyper_hotend_ADXL345_mount__v0.gcode",
"310980/gcode/vyper_hotend_ADXL345_mount__v1.gcode",
"310980/gcode/vyper_hotend_ADXL345_mount__v2.gcode",
"310980/gcode/vyper_hotend_ADXL345_mount__v3.gcode",
"310980/gcode/vyper_hotend_ADXL345_mount__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/310980 | gcodes_0488.tar |
310978 | Ikea wooden rail connection | [] | Toys & Games > Building Toys | [
"310978/images/ikea-connection.jpg",
"310978/images/rail-connection.jpg"
] | [
"310978/gcode/Spojka vlackodrahy__v0.gcode",
"310978/gcode/Spojka vlackodrahy__v1.gcode",
"310978/gcode/Spojka vlackodrahy__v2.gcode",
"310978/gcode/Spojka vlackodrahy__v3.gcode",
"310978/gcode/Spojka vlackodrahy__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/310978 | gcodes_0488.tar | |
310926 | BMW E46 M3 | [
"car",
"model",
"keychain",
"m3",
"bmw",
"bmwe46",
"e46",
"46",
"m3e46",
"bmwe46m3"
] | Art & Design > Other Art & Designs | [
"310926/images/1667684868361.jpg"
] | [
"310926/gcode/E46_M3__v0.gcode",
"310926/gcode/E46_M3__v1.gcode",
"310926/gcode/E46_M3__v2.gcode",
"310926/gcode/E46_M3__v3.gcode",
"310926/gcode/E46_M3__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/310926 | gcodes_0488.tar | |
310828 | Stacking 60ml Paint Rack | <p>Stackable paint rack for 60ml Apple Barrel and Folk Art paints. <br><br>This is inspired by another design I cannot find anywhere, however, it is built entirely from scratch in tinkercad. <br><br>I tried for a minimalist design to get the most bang for your buck. <br><br>Holds itself together under th... | [
"organizer",
"barrel",
"holder",
"apple",
"rack",
"paint",
"60ml"
] | Hobby & Makers > Organizers | [
"310828/images/313202979_1304435866976344_4590794425480152253_n.jpg",
"310828/images/kxlpij7.jpg",
"310828/images/omqwuhg.jpg"
] | [
"310828/gcode/TCL60mlpaintrack__v0.gcode",
"310828/gcode/TCL60mlpaintrack__v1.gcode",
"310828/gcode/TCL60mlpaintrack__v2.gcode",
"310828/gcode/TCL60mlpaintrack__v3.gcode",
"310828/gcode/TCL60mlpaintrack__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/310828 | gcodes_0488.tar |
310803 | Remote Holders | <p><i><strong>Practical remote control holder simple and elegant, but at the same time a piece of furniture with its sinuous lines that intertwine giving life to a real piece of modern furniture.</strong></i><br><i><strong>Printed on the unsupported side with 3 walls and a 20% infill.</strong></i></p> | [
"organizer",
"remoteholder",
"style",
"moderndesign"
] | Household > Home Decor | [
"310803/images/52c6a542-3f59-455f-a50e-51b065506018.jpg",
"310803/images/91d8eee8-b5e5-42b4-8e44-fc7d1ad6a28c.jpg",
"310803/images/e25cf9af-7b80-452a-8e69-c68713f66253.jpg",
"310803/images/74ed9622-5f32-4ada-b648-fb40518b69d3.jpg",
"310803/images/6652efb1-3b94-4ad5-9615-34194d91e013.jpg",
"310803/images/7... | [
"310803/gcode/porta telecomando (5)__v0.gcode",
"310803/gcode/porta telecomando (5)__v1.gcode",
"310803/gcode/porta telecomando (5)__v2.gcode",
"310803/gcode/porta telecomando (5)__v3.gcode",
"310803/gcode/porta telecomando (5)__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/310803 | gcodes_0488.tar |
310750 | cheese sifter | <p>Diameter 100 mm</p><p>Height 50 mm </p><p>Holes 2x2 mm</p><p> </p> | [
"homemade",
"cheese",
"sifter",
"sito",
"syr"
] | Household > Kitchen | [
"310750/images/sito-na-syr-a.jpg"
] | [
"310750/gcode/Sito na syr__v0.gcode",
"310750/gcode/Sito na syr__v1.gcode",
"310750/gcode/Sito na syr__v2.gcode",
"310750/gcode/Sito na syr__v3.gcode",
"310750/gcode/Sito na syr__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/310750 | gcodes_0488.tar |
310657 | customisable vase mode funnel | <p>this is a funnel made in prusa slicer and saved as a 3mf file to make it customisable, it's very smoothly rounded and easy to edit.</p><p>it is made of 2 parts, a cone and a cylinder, which can be edited in prusa slicer. i set the diameter of the cone to 66mm and the cylinder to 24mm which fits a water bottle perfec... | [
"bottle",
"funnel"
] | Household > Kitchen | [
"310657/images/20221105_175236.jpg"
] | [
"310657/gcode/customisable funnel__v1.gcode",
"310657/gcode/customisable funnel__v3.gcode",
"310657/gcode/customisable funnel__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/310657 | gcodes_0488.tar |
310612 | XYZ 20mm Calibration Cube Light | <p>Simple calibration cube 20mm and bridge test, all in one.</p><p> </p><p>About 2g filament.</p><p> </p><h3><strong>Print Settings</strong></h3><p>Resolution: 02 mm</p><p>Walls: 2</p><p>No need support</p><p> </p><p> </p><p>Category: Test</p><p>------</p><p><i>Happy Print to the whole community :)<... | [
"calibrationcube",
"bridgetest"
] | 3D Printers > Test Models | [
"310612/images/polish_20221105_1521314921.jpg",
"310612/images/pxl_20221105_160025271.jpg",
"310612/images/pxl_20221105_160054137.jpg"
] | [
"310612/gcode/cube20mm(light)__v0.gcode",
"310612/gcode/cube20mm(light)__v1.gcode",
"310612/gcode/cube20mm(light)__v2.gcode",
"310612/gcode/cube20mm(light)__v3.gcode",
"310612/gcode/cube20mm(light)__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/310612 | gcodes_0488.tar |
310564 | Badminton racket holder (2pcs) | <p>Remixed version of Ravi's model to hang two rackets instead of five. Added an additional hole to center mount on a unused hook.</p> | [
"organizer",
"organization",
"badminton",
"badmintonracket",
"badmintonholder"
] | Hobby & Makers > Organizers | [
"310564/images/img_0861.jpg",
"310564/images/img_0862.jpg"
] | [
"310564/gcode/Racket Holder 2pcs__v0.gcode",
"310564/gcode/Racket Holder 2pcs__v1.gcode",
"310564/gcode/Racket Holder 2pcs__v2.gcode",
"310564/gcode/Racket Holder 2pcs__v3.gcode",
"310564/gcode/Racket Holder 2pcs__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/310564 | gcodes_0488.tar |
310537 | Dyson v10 Adapter |
<p>Make offset to the cut to be able to push the lock.</p>
<p><a href="https://cad.onshape.com/documents/b5c3824941eafeb1fcfbcdb0/w/8de8ace6cf93ec6ee8284197/e/4fe86ef4dd0c314f25270d88">https://cad.onshape.com/documents/b5c3824941eafeb1fcfbcdb0/w/8de8ace6cf93ec6ee8284197/e/4fe86ef4dd0c314f25270d88</a></p>
<h3>Print S... | [
"dyson",
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"310537/images/large_display_dyson_adapter_310537.jpg"
] | [
"310537/gcode/Dyson_Adapter__v0.gcode",
"310537/gcode/Dyson_Adapter__v1.gcode",
"310537/gcode/Dyson_Adapter__v2.gcode",
"310537/gcode/Dyson_Adapter__v3.gcode",
"310537/gcode/Dyson_Adapter__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/310537 | gcodes_0488.tar |
310464 | PAINTING HANGER | <p>I normally use UHU super glue to hold it in place. Just print, glue and hang!</p> | [
"hanger",
"wallmounted",
"wallhook",
"wallhanger",
"picturehanger"
] | Art & Design > Wall-mounted | [
"310464/images/img_9542.jpg",
"310464/images/img_9543.jpg"
] | [
"310464/gcode/HANGER__v0.gcode",
"310464/gcode/HANGER__v1.gcode",
"310464/gcode/HANGER__v2.gcode",
"310464/gcode/HANGER__v3.gcode",
"310464/gcode/HANGER__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/310464 | gcodes_0488.tar |
310418 | Cord / Cable Coiler XL | <p>This is a larger version of the Cord / Cable Coiler by muzz64 so all credit for him.<br>Great design, very practical.</p><p>I enlarged the model so it could fit cable of 15m+ and I redesign the clips so it could still block 7.5mm diameter power cords.</p><p>Works for both EU and US plugs.</p><p>Please refer to the i... | [
"cable",
"cablemanagement",
"cableholder",
"coiler"
] | Hobby & Makers > Organizers | [
"310418/images/img_2980.jpg"
] | [
"310418/gcode/CORD COILER_XL__v1.gcode",
"310418/gcode/CORD COILER_XL__v3.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/310418 | gcodes_0488.tar |
310393 | Curtain Hook | <p>Simple curtain hook replacement part, which is quite common in Japan.</p><p> </p><p>Print time: 45m</p><p>0.15mm SPEED mode on Prusa Slicer using PLA on my Mini+</p> | [
"hook",
"curtain",
"curtainhook"
] | Household > Home Decor | [
"310393/images/pxl_20221105_083054198mp_2.jpg",
"310393/images/pxl_20221105_083130021_2.jpg"
] | [
"310393/gcode/curtain_hook_repair__v0.gcode",
"310393/gcode/curtain_hook_repair__v1.gcode",
"310393/gcode/curtain_hook_repair__v2.gcode",
"310393/gcode/curtain_hook_repair__v3.gcode",
"310393/gcode/curtain_hook_repair__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/310393 | gcodes_0488.tar |
310129 | kitchen roll holder |
<p>This is a kitchen roll holder but for the UK size rolls which are a lot smaller, the round part is 38mm, and the arm is 60mm in length so can hold a large roll, as in the picture im using a large plenty roll, printed in petg, very low on usage and both arms print in 2 hours, please post made one, and if you need ... | [
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"310129/images/large_display_20191025_163629_310129.jpg",
"310129/images/large_display_20191025_163652_310129.jpg",
"310129/images/large_display_20191025_164239_310129.jpg",
"310129/images/large_display_20191025_164627_310129.jpg"
] | [
"310129/gcode/kitchen_roll_holder_v2__v0.gcode",
"310129/gcode/kitchen_roll_holder_v2__v1.gcode",
"310129/gcode/kitchen_roll_holder_v2__v2.gcode",
"310129/gcode/kitchen_roll_holder_v2__v3.gcode",
"310129/gcode/kitchen_roll_holder_v2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/310129 | gcodes_0488.tar |
310125 | Stand for Z Fold 4 With S Pen Cover | <p>Simple but it works. Feel free to modify, improve, share, or whatever. I printed on it's side to minimize the amount of supports needed, print turned out good. </p> | [
"phonestand",
"smartphoneholder",
"smartphonestand",
"samsungzfold4",
"zfold4"
] | Hobby & Makers > Electronics | [
"310125/images/dsc00275.jpg",
"310125/images/dsc00274.jpg"
] | [
"310125/gcode/Fold 4 Stand V1__v0.gcode",
"310125/gcode/Fold 4 Stand V1__v1.gcode",
"310125/gcode/Fold 4 Stand V1__v2.gcode",
"310125/gcode/Fold 4 Stand V1__v3.gcode",
"310125/gcode/Fold 4 Stand V1__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/310125 | gcodes_0488.tar |
310083 | Camera Tripod Mount Adapter for Ender 3 V2 Arm |
<p>I loved the strong 'Ultimate Sturdy Octoprint / Pi Camera Mount' arm from Stewpercharged (<a href="https://www.thingiverse.com/thing:3374914">https://www.thingiverse.com/thing:3374914</a>), but I didn't want to mount a Pi Cam (using the 'Mendel90 Raspberry Pi cam holder' from JakesterDS — <a href="https://www.thi... | [
"camera",
"cameramount",
"tripod",
"adapter",
"octoprint",
"webcam",
"octolapse",
"ender3",
"webcammount",
"thingiverse",
"tripodadapter",
"ender3v2"
] | 3D Printers > Accessories | [
"310083/images/large_display_dsc01154_310083.jpg",
"310083/images/large_display_camera_mount_tripod_adapter_plate_310083.jpg",
"310083/images/large_display_tripod-adapter-printed_310083.jpg",
"310083/images/large_display_tripod-adapter-bottom_2_11zon_310083.jpg",
"310083/images/large_display_tripod-adapter-... | [
"310083/gcode/Camera_Mount_Tripod_Adapter_Plate__v0.gcode",
"310083/gcode/Camera_Mount_Tripod_Adapter_Plate__v1.gcode",
"310083/gcode/Camera_Mount_Tripod_Adapter_Plate__v2.gcode",
"310083/gcode/Camera_Mount_Tripod_Adapter_Plate__v3.gcode",
"310083/gcode/Camera_Mount_Tripod_Adapter_Plate__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/310083 | gcodes_0488.tar |
309994 | Creality Ender 5 Improved X EndStop Mount |
<p>I created this endstop mount for the Ender 5 because I never liked the way that the endstop hit the wheel on the X-axis. This requires no additional parts but you can add a second screw to the extrusion mounting if you like.</p>
<p>No supports are needed, your printer should be able to bridge just fine.</p>
<h3>P... | [
"thingiverse",
"endstop",
"ender5",
"xendstop",
"crealityender5",
"ender5upgrades"
] | 3D Printers > Creality Parts & Upgrades | [
"309994/images/0882d8203b82d119238f7737dccb99c0_display_large_309994.jpg",
"309994/images/6583e1d7e23ec73a33eb36f0ddcf81fc_display_large_309994.jpg",
"309994/images/e43eb9bc877b0221560a7795a2167960_display_large_309994.jpg"
] | [
"309994/gcode/XEndStop_v5__v0.gcode",
"309994/gcode/XEndStop_v5__v1.gcode",
"309994/gcode/XEndStop_v5__v2.gcode",
"309994/gcode/XEndStop_v5__v3.gcode",
"309994/gcode/XEndStop_v5__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/309994 | gcodes_0488.tar |
309928 | basic bowden clip v5/v6 |
<h3>A very basic bowden clip</h3>
<p>The height in the design is greater than 1 mm because on my printer the very first layers get squished so 1 mm height gets me about 0.6 mm for very thin pieces. Print one test then change z scale in slicer to fit.</p>
<p>I could not print other bowden clips with PLA and PETG, mos... | [
"thingiverse"
] | 3D Printers > Other Printer Parts & Upgrades | [
"309928/images/large_display_dsc_1558_309928.jpg"
] | [
"309928/gcode/small_v1-2__v0.gcode",
"309928/gcode/small_v1-2__v1.gcode",
"309928/gcode/small_v1-2__v2.gcode",
"309928/gcode/small_v1-2__v3.gcode",
"309928/gcode/small_v1-2__v4.gcode"
] | GNU General Public License v2.0 | https://www.printables.com/model/309928 | gcodes_0488.tar |
309666 | Case for the smile bookmarks | <p>Remixed from the great design Smile bookmark by Oxa: <a href="https://www.printables.com/model/85448-smile-bookmark">https://www.printables.com/model/85448-smile-bookmark</a> </p><p>This case holds up to 13 of said bookmarks.</p><p>I included the Freecad file (.FCStd) if you want to make changes.</p... | [
"bookmark",
"bookmarks"
] | Household > Other House Equipment | [
"309666/images/case_with_bookmarks.jpg"
] | [
"309666/gcode/bookmarks_case__v0.gcode",
"309666/gcode/bookmarks_case__v1.gcode",
"309666/gcode/bookmarks_case__v2.gcode",
"309666/gcode/bookmarks_case__v3.gcode",
"309666/gcode/bookmarks_case__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/309666 | gcodes_0488.tar |
309641 | Canyon cable clip | <p>handlebar cable clip with Canyon logo for 5mm + 5mm</p> | [] | Sports & Outdoor > Other Sports | [
"309641/images/cableclip.jpg"
] | [
"309641/gcode/cable clip Canyon__v0.gcode",
"309641/gcode/cable clip Canyon__v1.gcode",
"309641/gcode/cable clip Canyon__v2.gcode",
"309641/gcode/cable clip Canyon__v3.gcode",
"309641/gcode/cable clip Canyon__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/309641 | gcodes_0488.tar |
309624 | Scooby Doo Collar Tag |
<p>Scooby Doo Collar Tag</p>
Category: Accessories
| [
"collar",
"dogtag",
"keychain",
"thingiverse",
"scoobydoo"
] | Fashion > Other Fashion Accessories | [
"309624/images/832576ea388105dc116078a5fe7cf994_display_large_309624.jpg"
] | [
"309624/gcode/ScoobyDooTag_v6__v0.gcode",
"309624/gcode/ScoobyDooTag_v6__v1.gcode",
"309624/gcode/ScoobyDooTag_v6__v2.gcode",
"309624/gcode/ScoobyDooTag_v6__v3.gcode",
"309624/gcode/ScoobyDooTag_v6__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/309624 | gcodes_0488.tar |
309431 | Fridge inserts: transport spacer for Motorhome fridge | <p>The original design didn't fit my shelves, it was to loose. I redesigned it and reduce the radius of the curve in other to make it more tight.</p> | [
"shelf",
"fridge",
"refrigerator",
"caravan",
"motorhome",
"separator"
] | Household > Kitchen | [
"309431/images/image_20221122_161916_149.jpg",
"309431/images/image_20221122_161916_165.jpg",
"309431/images/screenshot4.jpg"
] | [
"309431/gcode/fridgeSeparator__v0.gcode",
"309431/gcode/fridgeSeparator__v1.gcode",
"309431/gcode/fridgeSeparator__v2.gcode",
"309431/gcode/fridgeSeparator__v3.gcode",
"309431/gcode/fridgeSeparator__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/309431 | gcodes_0488.tar |
309384 | Gridfinity Drill Box for drills up to 13 mm | [
"gridfinity"
] | Hobby & Makers > Organizers | [
"309384/images/2022-11-04-00_01_20-autodesk-fusion-360-lizenz-fur-bildungseinrichtungen.jpg",
"309384/images/img20221103235301.jpg"
] | [
"309384/gcode/13mm_drill_box__v1.gcode",
"309384/gcode/13mm_drill_box__v2.gcode",
"309384/gcode/13mm_drill_box__v3.gcode",
"309384/gcode/13mm_drill_box__v4.gcode"
] | GNU General Public License v2.0 | https://www.printables.com/model/309384 | gcodes_0488.tar | |
309382 | Gridfinity Drill Box for drills up to 11 mm | [
"gridfinity"
] | Hobby & Makers > Organizers | [
"309382/images/2022-11-03-23_53_14-autodesk-fusion-360-lizenz-fur-bildungseinrichtungen.jpg",
"309382/images/img20221103235301.jpg"
] | [
"309382/gcode/11mm_drill_box__v0.gcode",
"309382/gcode/11mm_drill_box__v1.gcode",
"309382/gcode/11mm_drill_box__v2.gcode",
"309382/gcode/11mm_drill_box__v3.gcode",
"309382/gcode/11mm_drill_box__v4.gcode"
] | GNU General Public License v2.0 | https://www.printables.com/model/309382 | gcodes_0488.tar | |
309367 | Dodecahedron cabinet knob | [
"parametric",
"furniture",
"fusion360",
"dodecahedron",
"cabinethandle",
"cabinetknob",
"matematic"
] | Household > Home Decor | [
"309367/images/dodekahedron.jpg"
] | [
"309367/gcode/Dodecaherdron__v0.gcode",
"309367/gcode/Dodecaherdron__v1.gcode",
"309367/gcode/Dodecaherdron__v2.gcode",
"309367/gcode/Dodecaherdron__v3.gcode",
"309367/gcode/Dodecaherdron__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/309367 | gcodes_0488.tar | |
309342 | Ikea Maximera Rod Mount | <p>I lost the rod mount for my Ikea Maximera Drawer so I designed a new one. Maybe you need one too.</p><p> </p><p>I just remodeled the original design so it's basically a 1:1 clone</p><p> </p><p>The photos are from a prototype. The only difference to the final version is a little gap on the rear to mount the... | [
"kitchen",
"ikea",
"maximera"
] | Household > Kitchen | [
"309342/images/img_7086.jpg",
"309342/images/img_7085.jpg",
"309342/images/img_7081.jpg",
"309342/images/img_7079.jpg",
"309342/images/img_7078.jpg",
"309342/images/fusion360_e3fktbttfh.jpg"
] | [
"309342/gcode/Ikea Maximera Rod Mount__v0.gcode",
"309342/gcode/Ikea Maximera Rod Mount__v1.gcode",
"309342/gcode/Ikea Maximera Rod Mount__v2.gcode",
"309342/gcode/Ikea Maximera Rod Mount__v3.gcode",
"309342/gcode/Ikea Maximera Rod Mount__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/309342 | gcodes_0488.tar |
309310 | Left Stepper Trash Can | <p>This is after one week of printing.</p> | [
"mk3",
"mk3s"
] | 3D Printers > Accessories | [
"309310/images/n_qxchint6ufbfp_dupeea.jpg",
"309310/images/bbg-1000.jpg"
] | [
"309310/gcode/LST-00-BBG__v0.gcode",
"309310/gcode/LST-00-BBG__v2.gcode",
"309310/gcode/LST-00-BBG__v3.gcode",
"309310/gcode/LST-00-BBG__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/309310 | gcodes_0488.tar |
309240 | A little scoop for your pets poop | <p>I needed small scoop to clean my chinchilla litter box ^^<br><br><strong>Printing comments:</strong></p><ul><li><strong>no support</strong> required</li><li>I had to include small brim, front of scoop is really small</li></ul> | [
"pet",
"poop",
"scoop",
"spoon",
"litter",
"hamster",
"rodent",
"poo",
"chinchilla"
] | Household > Pets | [
"309240/images/photo_2022-11-03_20-16-05.jpg"
] | [
"309240/gcode/poop scoop__v0.gcode",
"309240/gcode/poop scoop__v1.gcode",
"309240/gcode/poop scoop__v2.gcode",
"309240/gcode/poop scoop__v3.gcode",
"309240/gcode/poop scoop__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/309240 | gcodes_0488.tar |
309181 | Cat food scoop | <p>This is a approximately 25 gram food scoop for cats and maybe some smaller dogs.</p><p><br>The handle is quite ergonomic and fits nicely into these ikea boxes (<strong>HÅLLBAR</strong>) which makes it easier to store.</p><p>Depending on the kibble/food you use the scoop might scoop up slightly less or more than 25 g... | [
"dog",
"cat",
"food",
"scoop",
"useful",
"hallbar",
"kibble"
] | Household > Pets | [
"309181/images/scoop1.jpg",
"309181/images/scoop2.jpg",
"309181/images/scoop3.jpg"
] | [
"309181/gcode/Cat_food_scoop__v0.gcode",
"309181/gcode/Cat_food_scoop__v1.gcode",
"309181/gcode/Cat_food_scoop__v2.gcode",
"309181/gcode/Cat_food_scoop__v3.gcode",
"309181/gcode/Cat_food_scoop__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/309181 | gcodes_0488.tar |
309174 | pentacle coaster | [] | 3D Printers > Accessories | [
"309174/images/screenshot-2022-11-03-171423.jpg",
"309174/images/screenshot_20221103_171419.jpg",
"309174/images/screenshot_20221103_171411.jpg"
] | [
"309174/gcode/pentacle__v0.gcode",
"309174/gcode/pentacle__v1.gcode",
"309174/gcode/pentacle__v2.gcode",
"309174/gcode/pentacle__v3.gcode",
"309174/gcode/pentacle__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/309174 | gcodes_0488.tar | |
309106 | Oathsworn Monster Hex Adapter with Arrow | <p>Thanks user Armand7734 on thingiverse for the excellent model!</p><p>I just added a little triangle to act as an arrow of where the model is facing (when this is used with standees, might not be clear). Add a filament change command at the right layer and you can have it in a different color!</p><p>Can be used with ... | [
"oathsworn"
] | Toys & Games > Board Games | [
"309106/images/oathsworn_monster_hex_adapter-arrow.jpg"
] | [
"309106/gcode/oathsworn_monster_hex_adapter - arrow__v0.gcode",
"309106/gcode/oathsworn_monster_hex_adapter - arrow__v1.gcode",
"309106/gcode/oathsworn_monster_hex_adapter - arrow__v2.gcode",
"309106/gcode/oathsworn_monster_hex_adapter - arrow__v3.gcode",
"309106/gcode/oathsworn_monster_hex_adapter - arrow_... | Creative Commons — Attribution | https://www.printables.com/model/309106 | gcodes_0488.tar |
308997 | Storage cup | <p>This is a small cup designed for storing q-tips but can hold other stuff</p><p>Dimensions D88xH63 mm, inner diameter is 80 mm</p><p>Printed with Prusament opal green and 0.2 layer height, 200 q-tips is in the cup</p> | [
"cup",
"storage",
"cupholder",
"qtips"
] | Household > Bathroom | [
"308997/images/20221105_090137_1.jpg",
"308997/images/20221105_084933_1.jpg"
] | [
"308997/gcode/storage_cup__v0.gcode",
"308997/gcode/storage_cup__v1.gcode",
"308997/gcode/storage_cup__v2.gcode",
"308997/gcode/storage_cup__v3.gcode",
"308997/gcode/storage_cup__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/308997 | gcodes_0488.tar |
308853 | Indian god Hanuman Key chain |
<p>a simple key chain of Indian god Hanuman</p>
Category: Keychains
| [
"god",
"chain",
"3dprinting",
"gift",
"keychain",
"key",
"gifts",
"3dprint",
"thingiverse",
"keychains",
"3dkeychains"
] | Fashion > Other Fashion Accessories | [
"308853/images/1298dc8f3cbfdf7c5c3aceed9159800b_display_large_308853.jpg",
"308853/images/71f5bd7378e7ac5196b2d75e51730d0d_display_large_308853.jpg",
"308853/images/70f4ddd0b3551e8c91dd1312c0581158_display_large_308853.jpg",
"308853/images/b6b99be23d8420b5b340fd43f060cfa7_display_large_308853.jpg",
"308853/... | [
"308853/gcode/print__v0.gcode",
"308853/gcode/print__v1.gcode",
"308853/gcode/print__v2.gcode",
"308853/gcode/print__v3.gcode",
"308853/gcode/print__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/308853 | gcodes_0488.tar |
308620 | Simple Command Hook | <p>This model fits a small command strip, I originally designed it to hand a shower curtain from, so it also fits those holes.</p> | [
"hook",
"hanger",
"household",
"command",
"commandstrip",
"commandhook"
] | Hobby & Makers > Organizers | [
"308620/images/commandhook.jpg"
] | [
"308620/gcode/CommandHook__v0.gcode",
"308620/gcode/CommandHook__v1.gcode",
"308620/gcode/CommandHook__v2.gcode",
"308620/gcode/CommandHook__v3.gcode",
"308620/gcode/CommandHook__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/308620 | gcodes_0488.tar |
308465 | Caliper bracket for Skadis with battery holder | <p>This is a remix of a bracket by kjbturok with an added battery holder. </p><p>It makes sure you always have a spare in sight! ;)</p><p>Fits an SR44 battery (or any other 11.5 mm battery)</p> | [
"ikea",
"skadis",
"caliper",
"ikeaskadis"
] | Hobby & Makers > Organizers | [
"308465/images/img_0113.jpg"
] | [
"308465/gcode/Caliper holder w batt__v0.gcode",
"308465/gcode/Caliper holder w batt__v1.gcode",
"308465/gcode/Caliper holder w batt__v2.gcode",
"308465/gcode/Caliper holder w batt__v3.gcode",
"308465/gcode/Caliper holder w batt__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/308465 | gcodes_0488.tar |
308196 | Finger tip knob | <p>Make your grandpa's joke into your everyday life by turning your knob into a finger!<br><br>Nails can be easily painted with nail polish.<br><br>Screw is for M4 screws.<br> </p><p>Enjoy!</p><p> </p><p><br><strong>Print specs</strong></p><p>Supports: No</p><p>Detail: 0.2 (minimum, you can go lower for more ... | [
"knob",
"doorknob"
] | Household > Other House Equipment | [
"308196/images/pxl_20221102_125823536.jpg",
"308196/images/pxl_20221102_132319661.jpg",
"308196/images/pxl_20221102_125916427.jpg",
"308196/images/captura-de-pantalla-2022-11-02-a-las-113055.jpg"
] | [
"308196/gcode/M4 finger knob__v0.gcode",
"308196/gcode/M4 finger knob__v1.gcode",
"308196/gcode/M4 finger knob__v2.gcode",
"308196/gcode/M4 finger knob__v3.gcode",
"308196/gcode/M4 finger knob__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/308196 | gcodes_0488.tar |
308036 | Thin Low Profile PCI Slot Cover for Quadro or Firepro | <p>Lost your low profile PCI slot bracket/cover and need to get a graphics card in a tiny case or server chassis? Well maybe this will help you! The OG version was too thick for my case so I made this thinner and trimmer version. I recommend printing with a strong filament as it is thin and more delic... | [
"video",
"low",
"graphics",
"bracket",
"nvidia",
"slot",
"pci",
"profile",
"quadro",
"dvi",
"amd",
"displayport",
"radeon",
"firepro"
] | Gadgets > Computers | [
"308036/images/pxl_20221101_231354842.jpg",
"308036/images/pxl_20221102_000445606.jpg",
"308036/images/pxl_20221102_000117450.jpg",
"308036/images/pxl_20221102_000335802.jpg"
] | [
"308036/gcode/k600_thin_v1__v0.gcode",
"308036/gcode/k600_thin_v1__v1.gcode",
"308036/gcode/k600_thin_v1__v2.gcode",
"308036/gcode/k600_thin_v1__v3.gcode",
"308036/gcode/k600_thin_v1__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/308036 | gcodes_0488.tar |
308013 | Gargoyle Fence Post Topper | <p>I remixed one of the gargoyles to fit into the open end of the pipe on my gate. The bottom of the gargoyle is ~29mm is diameter. Easily scales up/down to fit different sizes of pipe.</p> | [
"steel",
"cap",
"topper",
"fence",
"gate",
"gargoyle",
"finial",
"fencepost"
] | Household > Outdoor & Garden | [
"308013/images/screenshot-2022-11-01-174128.jpg"
] | [
"308013/gcode/pipe-cap-gargoyle__v0.gcode",
"308013/gcode/pipe-cap-gargoyle__v1.gcode",
"308013/gcode/pipe-cap-gargoyle__v2.gcode",
"308013/gcode/pipe-cap-gargoyle__v3.gcode",
"308013/gcode/pipe-cap-gargoyle__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/308013 | gcodes_0488.tar |
308008 | My Customized Parametric funnel |
<p>Customized version of <a href="https://www.thingiverse.com/thing:1763508">https://www.thingiverse.com/thing:1763508</a></p>
<p>Created with Customizer! <a href="/apps/customizer/run">https://www.thingiverse.com/apps/customizer/run?thing_id=1763508</a></p>
<p>Customized funnel to fill Ancefine Precision Tip Glue A... | [
"funnel",
"thingiverse",
"customized"
] | Household > Kitchen | [
"308008/images/5ecfff718c07f5c593f9c015dcd8379d_display_large_308008.jpg"
] | [
"308008/gcode/parametric_funnel_20180624-61-h93md__v0.gcode",
"308008/gcode/parametric_funnel_20180624-61-h93md__v1.gcode",
"308008/gcode/parametric_funnel_20180624-61-h93md__v2.gcode",
"308008/gcode/parametric_funnel_20180624-61-h93md__v3.gcode",
"308008/gcode/parametric_funnel_20180624-61-h93md__v4.gcode"... | Creative Commons — Attribution | https://www.printables.com/model/308008 | gcodes_0488.tar |
308002 | Stand for Head Piece to the Staff of RA |
<p>This is a stand for the headpiece created by youngs66. I needed something to stand it up in my prop cabinet and designed this. I did not design the headpiece, I just printed it.</p>
<p><a href="https://www.thingiverse.com/thing:202589">https://www.thingiverse.com/thing:202589</a></p>
<h3>Print Settings</h3>
<p><s... | [
"indianajones",
"thingiverse"
] | Costumes & Accessories > Props | [
"308002/images/large_display_stand_308002.jpg",
"308002/images/large_display_ra_holder_v1_308002.jpg"
] | [
"308002/gcode/Ra_Holder_v1__v0.gcode",
"308002/gcode/Ra_Holder_v1__v1.gcode",
"308002/gcode/Ra_Holder_v1__v2.gcode",
"308002/gcode/Ra_Holder_v1__v3.gcode",
"308002/gcode/Ra_Holder_v1__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/308002 | gcodes_0488.tar |
307899 | Flower pot 2 | [
"flower",
"flowerpot",
"flowerpots"
] | Household > Home Decor | [
"307899/images/a03b96f1-3b8f-44fe-a072-7ea0712343ba.jpg"
] | [
"307899/gcode/kaktus kvetinac__v0.gcode",
"307899/gcode/kaktus kvetinac__v1.gcode",
"307899/gcode/kaktus kvetinac__v2.gcode",
"307899/gcode/kaktus kvetinac__v3.gcode",
"307899/gcode/kaktus kvetinac__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/307899 | gcodes_0488.tar | |
307817 | Redukce H13 na H4 | [
"reduction",
"redukce"
] | Hobby & Makers > Automotive | [
"307817/images/img_0341.jpg"
] | [
"307817/gcode/Reduction_H13_to_H4__v0.gcode",
"307817/gcode/Reduction_H13_to_H4__v1.gcode",
"307817/gcode/Reduction_H13_to_H4__v2.gcode",
"307817/gcode/Reduction_H13_to_H4__v3.gcode",
"307817/gcode/Reduction_H13_to_H4__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/307817 | gcodes_0488.tar | |
307724 | TableTop Bowling |
<p>This a 3d printed bowling game for your table top.</p>
<p>Please DO not sell my print</p>
<p>10/5/22 Original file</p>
<p>10/6/22 updated ramp with steeper angle larger pins thinner base.</p>
Category: Toys & Games
| [
"thingiverse"
] | Toys & Games > Outdoor Toys | [
"307724/images/large_display_b25a7121-998b-4877-a2c8-1e96e7bae995_307724.jpg",
"307724/images/large_display_3adbdf95-0b86-46a2-8d4f-e26fc63b681c_307724.jpg",
"307724/images/large_display_def662af-aaed-4c68-999f-4bc849b2eb35_307724.jpg"
] | [
"307724/gcode/tinker__v0.gcode",
"307724/gcode/tinker__v1.gcode",
"307724/gcode/tinker__v2.gcode",
"307724/gcode/tinker__v3.gcode",
"307724/gcode/tinker__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/307724 | gcodes_0488.tar |
307722 | Light Ryobi 18 Volt Tool holder |
<p>Printed in pla took about 1-2 hours holds tools up well</p>
<p>Please post your makes and make sure to comment any question</p>
<p>Please Do not Sell</p>
Category: Organization
| [
"thingiverse"
] | Household > Office | [
"307722/images/large_display_01d33c38-f2ea-409c-a935-d5a91e9f9aac_307722.jpg",
"307722/images/large_display_3f282a91-bb3e-4387-9d52-7db14e6213a0_307722.jpg",
"307722/images/large_display_ec82b244-3e7a-4556-9293-71887c0fdf92_307722.jpg"
] | [
"307722/gcode/tinker__v0.gcode",
"307722/gcode/tinker__v1.gcode",
"307722/gcode/tinker__v2.gcode",
"307722/gcode/tinker__v3.gcode",
"307722/gcode/tinker__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/307722 | gcodes_0488.tar |
307683 | Edge Pro to Wicked Edge Stone Holder, Adapter | <p>This holder will allow you to use Edge Pro stones with your Wicked Edge. </p><p>Epoxy the aluminum/plastic mount blank to the bottom of the adapter mount. </p><p>I've included the .stp file so you can modify this model if needed. For some stones, I moved the thru-hole location so i coul... | [] | 3D Printers > Accessories | [
"307683/images/untitled.jpg"
] | [
"307683/gcode/Adapter__v0.gcode",
"307683/gcode/Adapter__v1.gcode",
"307683/gcode/Adapter__v2.gcode",
"307683/gcode/Adapter__v3.gcode",
"307683/gcode/Adapter__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/307683 | gcodes_0488.tar |
307640 | Clip for aluminum profiles | <p>Clip to attach “stuff” to aluminum profile (30x30). </p><p>Fusion with the object you want to clip.</p><p>Easily resize it to adapt to short-longer objects.</p><p>To remove, squeeze the clip and incline laterally.</p> | [
"clip",
"aluminumprofile",
"extrusion30x30",
"30x30",
"30x30aluminiumprofile",
"aluminumframe"
] | Hobby & Makers > Mechanical Parts | [
"307640/images/immagine-2022-11-01-145121.jpg",
"307640/images/orange-pi-case-2.jpg",
"307640/images/orange-pi-case-1.jpg",
"307640/images/orange-pi-case-3.jpg"
] | [
"307640/gcode/Axis clip__v0.gcode",
"307640/gcode/Axis clip__v1.gcode",
"307640/gcode/Axis clip__v2.gcode",
"307640/gcode/Axis clip__v3.gcode",
"307640/gcode/Axis clip__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/307640 | gcodes_0488.tar |
307633 | Ikea IVAR hook | <p>Printed with 100% infill PLA from francofil.fr</p><p>Tested with 15 kg over several weeks, no issues.</p> | [
"ikea",
"hook",
"ivar",
"ikeaivar",
"ikeaivarhook"
] | Household > Other House Equipment | [
"307633/images/ikea-ivar-hook.jpg"
] | [
"307633/gcode/hook ikea IVAR__v0.gcode",
"307633/gcode/hook ikea IVAR__v1.gcode",
"307633/gcode/hook ikea IVAR__v2.gcode",
"307633/gcode/hook ikea IVAR__v3.gcode",
"307633/gcode/hook ikea IVAR__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/307633 | gcodes_0488.tar |
307611 | STAR WARS Death Star knob | [
"knob",
"starwars",
"deathstar",
"drzak",
"madlo",
"cabinethandle",
"uchytka",
"cabinetknob"
] | Household > Home Decor | [
"307611/images/img_20221102_101739_2.jpg",
"307611/images/img_20221102_101807_2.jpg",
"307611/images/swknob.jpg"
] | [
"307611/gcode/knob1__v0.gcode",
"307611/gcode/knob1__v1.gcode",
"307611/gcode/knob1__v2.gcode",
"307611/gcode/knob1__v3.gcode",
"307611/gcode/knob1__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/307611 | gcodes_0488.tar | |
307544 | Xiaomi Mi Router 4C Wall Hook |
<p>Крюк для крепления роутера Mi Router 4C к стене</p>
Category: Organization
| [
"xiaomi",
"thingiverse"
] | Household > Office | [
"307544/images/large_display_01c98555-7609-4ff5-83b4-1f8e9580a245_307544.jpg",
"307544/images/large_display_40499d90-962a-481f-9977-d90c9a6ab761_307544.jpg"
] | [
"307544/gcode/xiaomi_mi_router_4c_wall_hook__v0.gcode",
"307544/gcode/xiaomi_mi_router_4c_wall_hook__v1.gcode",
"307544/gcode/xiaomi_mi_router_4c_wall_hook__v2.gcode",
"307544/gcode/xiaomi_mi_router_4c_wall_hook__v3.gcode",
"307544/gcode/xiaomi_mi_router_4c_wall_hook__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/307544 | gcodes_0488.tar |
307502 | 3DSets Landy 4x4 Wagon Switch board for QuicRun WP10BL30 | <p>can be printed without supports in PLA and be connected on the pins with glue</p> | [
"wagon",
"landy",
"switchboard",
"3dsetsmodel5",
"quicrun"
] | Hobby & Makers > RC & Robotics | [
"307502/images/img_3932.jpg",
"307502/images/img_3933.jpg",
"307502/images/img_3934.jpg"
] | [
"307502/gcode/Switch board QuicRun WP10BL30 (5)__v0.gcode",
"307502/gcode/Switch board QuicRun WP10BL30 (5)__v1.gcode",
"307502/gcode/Switch board QuicRun WP10BL30 (5)__v2.gcode",
"307502/gcode/Switch board QuicRun WP10BL30 (5)__v3.gcode",
"307502/gcode/Switch board QuicRun WP10BL30 (5)__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/307502 | gcodes_0488.tar |
307449 | KP3S First Layer Calibration | <p>Quick and simple printing that allows you to check the first layer and the level of the bed.</p> | [
"test",
"testprint",
"bedleveling",
"kingroonkp3s",
"kp3s"
] | 3D Printers > Test Models | [
"307449/images/bed.jpg"
] | [
"307449/gcode/kp3s__v0.gcode",
"307449/gcode/kp3s__v3.gcode",
"307449/gcode/kp3s__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/307449 | gcodes_0488.tar |
307440 | Replacement gears for a Taurus GRIO 913524 mixer | <p>This beater / mixer uses a worm drive and two plastic gears that receive the bits that mix the food, this is a replacement for those plastic parts which are prone to wearing out. I printed the replacement from eSun ePA-CF which should be easily tough enough but may increase wear on the worm gear (the carbon fi... | [
"gears",
"mixer"
] | Household > Kitchen | [
"307440/images/mixer-gears.jpg",
"307440/images/mixer_assembled.jpg"
] | [
"307440/gcode/beater gear v2__v0.gcode",
"307440/gcode/beater gear v2__v1.gcode",
"307440/gcode/beater gear v2__v2.gcode",
"307440/gcode/beater gear v2__v3.gcode",
"307440/gcode/beater gear v2__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/307440 | gcodes_0488.tar |
307408 | TWO TREES BLUER - LEADSCREW STABILIZER AXIS Z BEARING 608 | <p>stabilizátor osy Z pro Two Trees Bluer<br>Verze bez pomocí šroubů a na dvě ložiska, bohatě stačí použít jen jedno (608)<br><br>Tisk PLA</p> | [
"zaxis",
"bearingholder"
] | 3D Printers > Other Printer Parts & Upgrades | [
"307408/images/1.jpg"
] | [
"307408/gcode/LEADSCREW_STABILIZER_Z_BEARING_608__v0.gcode",
"307408/gcode/LEADSCREW_STABILIZER_Z_BEARING_608__v1.gcode",
"307408/gcode/LEADSCREW_STABILIZER_Z_BEARING_608__v2.gcode",
"307408/gcode/LEADSCREW_STABILIZER_Z_BEARING_608__v3.gcode",
"307408/gcode/LEADSCREW_STABILIZER_Z_BEARING_608__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/307408 | gcodes_0488.tar |
307215 | Wall Mounted Toothbrush/Toothpaste Holder | <p>No supports required. A simple toothbrush or toothpaste holder that can be mounted with command strips or VHB. Took the measurements and adjusted the design of this product: <a href="https://www.amazon.com/Mspan-Toothbrush-Razor-Holder-Shower/dp/B0819WT3HY?ref_=ast_sto_dp&th=1">https://www.amazon.com... | [
"bathroom",
"toothbrushholder",
"toothpasteholder"
] | Household > Bathroom | [
"307215/images/17643d5d-a526-4273-a758-d8f7a1e4bca4.jpg",
"307215/images/71isbsykpxl_ac_sl1500.jpg"
] | [
"307215/gcode/Toothbrush Holder v2__v0.gcode",
"307215/gcode/Toothbrush Holder v2__v1.gcode",
"307215/gcode/Toothbrush Holder v2__v2.gcode",
"307215/gcode/Toothbrush Holder v2__v3.gcode",
"307215/gcode/Toothbrush Holder v2__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/307215 | gcodes_0488.tar |
307159 | Planetary Knob | <p>This model was designed for the cabinet knobs contest on Printables!</p><p>I wanted to design my first print in place assembly with no supports or additional assembly after printing. </p><p>The hole is a tap size for an M4 bolt. </p><p><strong>Recommended Settings:</strong></p><ul><li>0.4mm nozzle.</li><li... | [
"knob",
"gears",
"cabinet",
"planetary",
"contest",
"cabinetknob",
"drawerknob"
] | Household > Home Decor | [
"307159/images/planetary-knob-2.jpg",
"307159/images/planetary-knob-4.jpg",
"307159/images/planetary-knob-1.jpg",
"307159/images/planetary-knob-3.jpg",
"307159/images/planetary-knob-5.jpg",
"307159/images/pxl_20221102_113144056.jpg",
"307159/images/pxl_20221102_113108712.jpg",
"307159/images/pxl_20221... | [
"307159/gcode/Planetary Knob__v0.gcode",
"307159/gcode/Planetary Knob__v1.gcode",
"307159/gcode/Planetary Knob__v2.gcode",
"307159/gcode/Planetary Knob__v3.gcode",
"307159/gcode/Planetary Knob__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/307159 | gcodes_0488.tar |
307019 | Eiffel Tower flat keychain | [
"eiffel",
"keychain"
] | Art & Design > Other Art & Designs | [
"307019/images/pxl_20221031_162127425.jpg"
] | [
"307019/gcode/flat eiffel__v0.gcode",
"307019/gcode/flat eiffel__v1.gcode",
"307019/gcode/flat eiffel__v2.gcode",
"307019/gcode/flat eiffel__v3.gcode",
"307019/gcode/flat eiffel__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/307019 | gcodes_0488.tar | |
306977 | Parametric tentacle doorknob | <h3>Parametric tentacle doorknob</h3><p> </p><p>Configurable inset :</p><p>Bolt height and length </p><p>Screw diameter </p><p>Bolt and screw tolerance </p><p> </p><p> </p> | [] | Household > Home Decor | [
"306977/images/capture-decran-2022-10-31-160251.jpg",
"306977/images/capture-decran-2022-10-31-160054.jpg"
] | [
"306977/gcode/tentacle_doorknob_10mmby5mmbolt__v0.gcode",
"306977/gcode/tentacle_doorknob_10mmby5mmbolt__v1.gcode",
"306977/gcode/tentacle_doorknob_10mmby5mmbolt__v2.gcode",
"306977/gcode/tentacle_doorknob_10mmby5mmbolt__v3.gcode",
"306977/gcode/tentacle_doorknob_10mmby5mmbolt__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/306977 | gcodes_0488.tar |
306908 | HP Reverb G2 upwards cable clip |
<p>2021-01-02: Added V2 with a larger ring for the cable – I was afraid the cable could get damaged by bending.</p>
<p>Cable clip for HP Reverb G2, directing the cable upwards – useful for pulley systems</p>
<p><strong>TO BE USED TOGETHER WITH THE ORIGINAL SIDE CABLE CLIP</strong></p>
<p>I recommend also printing my... | [
"thingiverse",
"reverbg2",
"hpreverb",
"hpreverbg2"
] | Gadgets > Other Gadgets | [
"306908/images/large_display_dsc_0838_306908.jpg",
"306908/images/large_display_dsc_0844_306908.jpg",
"306908/images/large_display_dsc_0841_306908.jpg",
"306908/images/large_display_dsc_0834_306908.jpg",
"306908/images/large_display_g2_upward_cable_clip_v2_306908.jpg"
] | [
"306908/gcode/G2_Upward_Cable_Clip_V2__v0.gcode",
"306908/gcode/G2_Upward_Cable_Clip_V2__v1.gcode",
"306908/gcode/G2_Upward_Cable_Clip_V2__v2.gcode",
"306908/gcode/G2_Upward_Cable_Clip_V2__v3.gcode",
"306908/gcode/G2_Upward_Cable_Clip_V2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/306908 | gcodes_0488.tar |
306653 | Base SKR MINI E3 V3.0 | <figure class="image"><img src="https://media.printables.com/media/prints/306653/rich_content/6b87f3cc-79ec-495c-89ec-a28361a6da83/1667194279406.jpg#%7B%22uuid%22%3A%22fd831d5d-dc82-4796-b433-d50950177fbd%22%2C%22w%22%3A4000%2C%22h%22%3A3000%7D"></figure> | [] | 3D Printers > Accessories | [
"306653/images/1667194511582.jpg",
"306653/images/1667194185957.jpg",
"306653/images/1667194279406.jpg"
] | [
"306653/gcode/Base SKR MINI E3 (1)__v0.gcode",
"306653/gcode/Base SKR MINI E3 (1)__v1.gcode",
"306653/gcode/Base SKR MINI E3 (1)__v2.gcode",
"306653/gcode/Base SKR MINI E3 (1)__v3.gcode",
"306653/gcode/Base SKR MINI E3 (1)__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/306653 | gcodes_0488.tar |
306610 | The Rock Croc Charm | <p>Two piece for good bed adhesion. Fit is very tight and probably doesn't need any glue. Printed with PLA and took about 45 min on ender 3 V2.</p> | [
"charm",
"therock",
"croc",
"jibbitz"
] | Costumes & Accessories > Props | [
"306610/images/received_812792916440042.jpg",
"306610/images/20221030_204832.jpg"
] | [
"306610/gcode/croc rock v2__v0.gcode",
"306610/gcode/croc rock v2__v1.gcode",
"306610/gcode/croc rock v2__v2.gcode",
"306610/gcode/croc rock v2__v3.gcode",
"306610/gcode/croc rock v2__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/306610 | gcodes_0488.tar |
306421 | Replacement Fan Craftsman/Husky Air Compressor | <p> The compressor I repaired was a Craftsman CMXECXM331. While replacing the piston I accidentally broke a few fins off my original fan. While looking for a replacement fan I found this one had been discontinued. </p><p>This should work for anything asking for a Craftsman/Husky part number E10784... | [
"replacement",
"fan",
"craftsman",
"husky",
"aircompressor",
"e10784",
"e106665"
] | Hobby & Makers > Mechanical Parts | [
"306421/images/img_20221030_140249004.jpg",
"306421/images/img_20221030_140111586.jpg",
"306421/images/img_20221030_140049621.jpg",
"306421/images/img_20221030_135922504.jpg",
"306421/images/e106665.jpg"
] | [
"306421/gcode/Fan Simplified Craftsman Husky__v0.gcode",
"306421/gcode/Fan Simplified Craftsman Husky__v1.gcode",
"306421/gcode/Fan Simplified Craftsman Husky__v2.gcode",
"306421/gcode/Fan Simplified Craftsman Husky__v3.gcode",
"306421/gcode/Fan Simplified Craftsman Husky__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/306421 | gcodes_0488.tar |
306278 | Halloween Lighting Ghost | <p>Lighting ghost with small led tealight</p> | [
"ghost"
] | Seasonal designs > Autumn & Halloween | [
"306278/images/ghost.jpg"
] | [
"306278/gcode/Ghost__v0.gcode",
"306278/gcode/Ghost__v1.gcode",
"306278/gcode/Ghost__v2.gcode",
"306278/gcode/Ghost__v3.gcode",
"306278/gcode/Ghost__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/306278 | gcodes_0488.tar |
306226 | Beautiful rose cabinet knob | <p>Beautiful rose cabinet knob. This suprisingly looks good in person, especially in PLA Marble Grey by Prusament, awesome filament! Sadly, I don't posses red, so I created render for you to see how it would look like.</p><p>The bottom has added "negative volume-cillinder, perfect for M3 press in threaded insert.</p><p... | [] | Household > Home Decor | [
"306226/images/red-rose-knob.jpg",
"306226/images/white-rose-knob.jpg",
"306226/images/rose-white-knobs.jpg",
"306226/images/red-rose-knobs-group.jpg",
"306226/images/20221030_154326.jpg",
"306226/images/20221030_154331.jpg",
"306226/images/20221030_154304.jpg",
"306226/images/20221030_153959.jpg",
... | [
"306226/gcode/Rose knob__v0.gcode",
"306226/gcode/Rose knob__v1.gcode",
"306226/gcode/Rose knob__v2.gcode",
"306226/gcode/Rose knob__v3.gcode",
"306226/gcode/Rose knob__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/306226 | gcodes_0488.tar |
306153 | Ikea Pencil Holder | <p>printed on a Artillery Sidewinder X2 with no support and default settings.</p><p>designed in Tinkercad</p><p> </p><p> </p> | [
"ikea",
"pencil",
"pencilh"
] | Hobby & Makers > Tools | [
"306153/images/img_20221030_155918_edit_1055451779418115.jpg",
"306153/images/img_20221030_155311.jpg"
] | [
"306153/gcode/ikea pencil holder__v0.gcode",
"306153/gcode/ikea pencil holder__v1.gcode",
"306153/gcode/ikea pencil holder__v2.gcode",
"306153/gcode/ikea pencil holder__v3.gcode",
"306153/gcode/ikea pencil holder__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/306153 | gcodes_0488.tar |
306024 | Anytime Digital Caliper Thumb Wheel Replacement Part | <p>The part that held the thumb wheel on my calipers broke and I needed a replacement. Could not find one to buy or print, so I designed this replacement with SketchUp 2018 and printed it on my Mk3 using Prusament Galaxy Silver at 0.1 mm layer height with supports. The part has worked well for years. ... | [
"replacementpart",
"digitalcaliper"
] | Hobby & Makers > Mechanical Parts | [
"306024/images/img_20221030_100432326.jpg",
"306024/images/img_20221030_100403242.jpg"
] | [
"306024/gcode/Caliper Thumbwheel Holder__v0.gcode",
"306024/gcode/Caliper Thumbwheel Holder__v1.gcode",
"306024/gcode/Caliper Thumbwheel Holder__v2.gcode",
"306024/gcode/Caliper Thumbwheel Holder__v3.gcode",
"306024/gcode/Caliper Thumbwheel Holder__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/306024 | gcodes_0488.tar |
305989 | Remixed tool holder | <p>I have an ender 3 s1 and the rails are smooth thers not alot of mounting options. I like this holder and so far I have no z axis clearance issues. I find myself only using one set of tweezers, but I find I need the allen keys often. I removed all of the tweezers slots and replaced them with holes sized for the set o... | [
"creality",
"toolholder",
"crealityender3"
] | 3D Printers > Accessories | [
"305989/images/20221030_071143.jpg",
"305989/images/20221030_071603.jpg"
] | [
"305989/gcode/tool_holder_remix_V2(Solid)__v0.gcode",
"305989/gcode/tool_holder_remix_V2(Solid)__v1.gcode",
"305989/gcode/tool_holder_remix_V2(Solid)__v2.gcode",
"305989/gcode/tool_holder_remix_V2(Solid)__v3.gcode",
"305989/gcode/tool_holder_remix_V2(Solid)__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/305989 | gcodes_0488.tar |
305973 | gear stick bushing for suzuki gearbox | <p>gear stick bushing for suzuki manuel gearbox ptint it in TPU</p> | [] | Hobby & Makers > Mechanical Parts | [
"305973/images/20190914_123754.jpg",
"305973/images/20190914_125418.jpg"
] | [
"305973/gcode/gear lever bushing__v0.gcode",
"305973/gcode/gear lever bushing__v1.gcode",
"305973/gcode/gear lever bushing__v2.gcode",
"305973/gcode/gear lever bushing__v3.gcode",
"305973/gcode/gear lever bushing__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/305973 | gcodes_0489.tar |
305968 | Impact Driver Bits Holder | <p>Just a simple holder for impact driver bits. Ideal for easy storage.</p><ul><li>1/2</li><li>3/8</li><li>1/4</li></ul><p>Have Fun</p> | [
"socket",
"bits",
"craft",
"make",
"hexdriver",
"impact"
] | Hobby & Makers > Organizers | [
"305968/images/img.jpg"
] | [
"305968/gcode/Socket Adapter__v0.gcode",
"305968/gcode/Socket Adapter__v1.gcode",
"305968/gcode/Socket Adapter__v2.gcode",
"305968/gcode/Socket Adapter__v3.gcode",
"305968/gcode/Socket Adapter__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/305968 | gcodes_0489.tar |
305963 | Smart watch charging stand 1 | [
"stand",
"charging",
"smart",
"smartwatch",
"smartwatchstand",
"watch",
"smartwatchcharger",
"hodinky",
"stojanek",
"c300",
"nabijeci"
] | Gadgets > Portable Devices | [
"305963/images/img_20221019_200650.jpg",
"305963/images/img_20221019_200707.jpg",
"305963/images/img_20221019_200735.jpg"
] | [
"305963/gcode/Smartwatch stand__v0.gcode",
"305963/gcode/Smartwatch stand__v1.gcode",
"305963/gcode/Smartwatch stand__v2.gcode",
"305963/gcode/Smartwatch stand__v3.gcode",
"305963/gcode/Smartwatch stand__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/305963 | gcodes_0489.tar | |
305883 | Curved train track section | <p>Print with supports to achieve best fit of the interface between sections. The photo shows the similarity between the part 3d printed in white PLA, and the original that was used for inspiration in grey.</p> | [] | Toys & Games > Vehicles | [
"305883/images/img_20221030_061309997.jpg"
] | [
"305883/gcode/Curved track rail__v0.gcode",
"305883/gcode/Curved track rail__v1.gcode",
"305883/gcode/Curved track rail__v2.gcode",
"305883/gcode/Curved track rail__v3.gcode",
"305883/gcode/Curved track rail__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/305883 | gcodes_0489.tar |
305867 | S hook | <p>Suggest using 100% infill for strength<br> </p> | [
"hook",
"hanger"
] | Household > Other House Equipment | [
"305867/images/hook-render.jpg"
] | [
"305867/gcode/S hook2__v0.gcode",
"305867/gcode/S hook2__v1.gcode",
"305867/gcode/S hook2__v2.gcode",
"305867/gcode/S hook2__v3.gcode",
"305867/gcode/S hook2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/305867 | gcodes_0489.tar |
305863 | Makita Drill Wall Mount | <p>The height is raised to 37 mm (11.3 mm in the original model) </p><p> </p><p>PLA/PETG</p><p>0.2-0.3 mm layer height</p><p> </p> | [
"wallmount",
"toolholder",
"makita",
"makita18v"
] | Hobby & Makers > Organizers | [
"305863/images/img_0804.jpg",
"305863/images/img_0803.jpg",
"305863/images/img_0801.jpg",
"305863/images/img_0800.jpg",
"305863/images/2022-10-30_10-48.jpg",
"305863/images/2022-10-30_11-04.jpg"
] | [
"305863/gcode/makita_tool_holder_37mm__v0.gcode",
"305863/gcode/makita_tool_holder_37mm__v1.gcode",
"305863/gcode/makita_tool_holder_37mm__v2.gcode",
"305863/gcode/makita_tool_holder_37mm__v3.gcode",
"305863/gcode/makita_tool_holder_37mm__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/305863 | gcodes_0489.tar |
305778 | Gameboy Advance SP Battery Cover | No Supports | Embossed Logo | [
"boy",
"game",
"gameboy",
"replacement",
"battery",
"cover",
"advance",
"sp"
] | Gadgets > Video Games | [
"305778/images/backplaterender2.jpg",
"305778/images/backplaterender1.jpg",
"305778/images/pxl_20221030_061423125night.jpg"
] | [
"305778/gcode/GBA_SP_Backplate__v0.gcode",
"305778/gcode/GBA_SP_Backplate__v1.gcode",
"305778/gcode/GBA_SP_Backplate__v2.gcode",
"305778/gcode/GBA_SP_Backplate__v3.gcode",
"305778/gcode/GBA_SP_Backplate__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/305778 | gcodes_0489.tar | |
305664 | Cute Pumpkin Keychain Large Mouth | <p>Cute Pumpkin Keychain to carry around with you during Halloween!</p> | [] | Seasonal designs > Autumn & Halloween | [
"305664/images/screen-shot-2022-10-29-at-75148-pm.jpg"
] | [
"305664/gcode/Cute Pumpkin Keychain Large Mouth__v0.gcode",
"305664/gcode/Cute Pumpkin Keychain Large Mouth__v1.gcode",
"305664/gcode/Cute Pumpkin Keychain Large Mouth__v2.gcode",
"305664/gcode/Cute Pumpkin Keychain Large Mouth__v3.gcode",
"305664/gcode/Cute Pumpkin Keychain Large Mouth__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/305664 | gcodes_0489.tar |
305662 | EZVIZ's DB1 | <p>0.4mm nozzel</p><p>print flat</p> | [
"doorbell"
] | Gadgets > Other Gadgets | [
"305662/images/capture3.jpg"
] | [
"305662/gcode/DB1 20 Backing Plate V30__v0.gcode",
"305662/gcode/DB1 20 Backing Plate V30__v1.gcode",
"305662/gcode/DB1 20 Backing Plate V30__v2.gcode",
"305662/gcode/DB1 20 Backing Plate V30__v3.gcode",
"305662/gcode/DB1 20 Backing Plate V30__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/305662 | gcodes_0489.tar |
305653 | Elegoo Neptune 3 fan shroud with BLTouch mount | <p>I added a BLTouch mount to Tal's Neptune 3 Fan shroud, this enables greater flexibility in hotend choice and significantly speeds up bed leveling. I also shortened the duct slightly as the original version had the duct very close to silicone sock and model. Probe offsets are x = 51.25 y = 2.25. Depending on where wh... | [
"fanduct",
"bltouch",
"bltouchmount",
"elegooneptune3"
] | 3D Printers > Other Printer Parts & Upgrades | [
"305653/images/1667070168693.jpg"
] | [
"305653/gcode/Neptune 3 Duct V2 BLTouch__v0.gcode",
"305653/gcode/Neptune 3 Duct V2 BLTouch__v1.gcode",
"305653/gcode/Neptune 3 Duct V2 BLTouch__v2.gcode",
"305653/gcode/Neptune 3 Duct V2 BLTouch__v3.gcode",
"305653/gcode/Neptune 3 Duct V2 BLTouch__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/305653 | gcodes_0489.tar |
305619 | Baratza Encore Replacement Knob | <p>A friend's coffee grinder knob broke, so I modeled up a replacement that doesn't require any supports and results in a friction fit. If you chemically smooth it, be sure to tape off the bottom to prevent the shape of the core from being altered.</p> | [
"knob",
"replacement",
"baratza",
"coffeegrinder",
"replacementpart",
"baratzaencore"
] | Household > Kitchen | [
"305619/images/6807bd44-74dc-4c05-bb1b-7ddc95c80787.jpg",
"305619/images/d117deb5-2be4-401a-ae45-caa390a63b32_1_105_c.jpg"
] | [
"305619/gcode/Knob__v0.gcode",
"305619/gcode/Knob__v1.gcode",
"305619/gcode/Knob__v2.gcode",
"305619/gcode/Knob__v3.gcode",
"305619/gcode/Knob__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/305619 | gcodes_0489.tar |
305597 | OV5647 Y Axis Mount Ender 3 V2 | <p>This is a remix of this mount by <a href="https://www.thingiverse.com/Whitefiretiger">Whitefiretiger</a> : <a href="https://www.thingiverse.com/thing:5559571">https://www.thingiverse.com/thing:5559571</a> </p><p>This is designed to work with this specific Arducam Enclosure: <a href="https://www.thingiverse.com/... | [
"ov5647",
"arducamov5647case"
] | 3D Printers > Creality Parts & Upgrades | [
"305597/images/img_5035.jpg"
] | [
"305597/gcode/Creality Ender 3 V2 Y Axis Mount (8)__v0.gcode",
"305597/gcode/Creality Ender 3 V2 Y Axis Mount (8)__v1.gcode",
"305597/gcode/Creality Ender 3 V2 Y Axis Mount (8)__v2.gcode",
"305597/gcode/Creality Ender 3 V2 Y Axis Mount (8)__v3.gcode",
"305597/gcode/Creality Ender 3 V2 Y Axis Mount (8)__v4.g... | Creative Commons — Attribution | https://www.printables.com/model/305597 | gcodes_0489.tar |
305465 | Edge Trimer for Honeycomb wall mount | [
"holder",
"mount",
"honeycomb",
"edge",
"honeycombstoragewall",
"edgetrimer"
] | Hobby & Makers > Tools | [
"305465/images/img_20221029_220126.jpg",
"305465/images/img_20221029_220132.jpg"
] | [
"305465/gcode/Edge Trimmer__v0.gcode",
"305465/gcode/Edge Trimmer__v1.gcode",
"305465/gcode/Edge Trimmer__v2.gcode",
"305465/gcode/Edge Trimmer__v3.gcode",
"305465/gcode/Edge Trimmer__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/305465 | gcodes_0489.tar | |
305348 | Stronger Carboy Stopper Clamp | <p>Remix of Carboy Stopper Clamp from @TheWalrus with additional reinforcement and 10mm stopper height (instead of 5mm). The original is well designed, and this has just a few minor tweaks. This device keeps wet stoppers from slipping out of glass carboys used for homebrewing.</p>
<p>I printed the original Carboy Stopp... | [
"beer",
"stopper",
"wine",
"homebrewing",
"thingiverse",
"airlock",
"carboy"
] | Hobby & Makers > Other Ideas | [
"305348/images/c08014b9194d58734894746cb4ca9446_display_large_305348.jpg",
"305348/images/9e66c81120a28b6eca1c4b0010d73824_display_large_305348.jpg",
"305348/images/ff13547b386cb0fb3d53f33156c3fd1a_display_large_305348.jpg"
] | [
"305348/gcode/stopper_clamp_carboy__v0.gcode",
"305348/gcode/stopper_clamp_carboy__v1.gcode",
"305348/gcode/stopper_clamp_carboy__v2.gcode",
"305348/gcode/stopper_clamp_carboy__v3.gcode",
"305348/gcode/stopper_clamp_carboy__v4.gcode"
] | GNU General Public License v2.0 | https://www.printables.com/model/305348 | gcodes_0489.tar |
305346 | Carboy Dryer | <p>This is a stand for drying a glass carboy after washing it. Fits both of my 5gal and 6.5gal glass carboys. The neck of the carboy is held in place so that it cannot tip while in the stand.</p>
<p>The design is made using two bezier curves, extruded rotationally, and then rounded holes punched in the sidewall for air... | [
"beer",
"stand",
"wine",
"homebrewing",
"thingiverse",
"carboy"
] | Hobby & Makers > Other Ideas | [
"305346/images/7f79e2b436cc3b59f33aac397813e2b6_display_large_305346.jpg",
"305346/images/83a27430db3ca1c210bbc59d7e1c4f23_display_large_305346.jpg",
"305346/images/b77ea925ec8717c0c6e26af859d1b091_display_large_305346.jpg"
] | [
"305346/gcode/carboy_dryer__v0.gcode",
"305346/gcode/carboy_dryer__v1.gcode",
"305346/gcode/carboy_dryer__v2.gcode",
"305346/gcode/carboy_dryer__v3.gcode",
"305346/gcode/carboy_dryer__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/305346 | gcodes_0489.tar |
305185 | Držáček na USB a podobné kabely | <p>…jen další z mnoha podobných…… </p><p>Tiskl jsem z ASA, protože bylo právě vloženo do tiskárny.</p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p> | [] | Gadgets > Computers | [
"305185/images/drzacek.jpg"
] | [
"305185/gcode/Drzak na kabely__v0.gcode",
"305185/gcode/Drzak na kabely__v1.gcode",
"305185/gcode/Drzak na kabely__v2.gcode",
"305185/gcode/Drzak na kabely__v3.gcode",
"305185/gcode/Drzak na kabely__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/305185 | gcodes_0489.tar |
305054 | Doorbell sign | <p>Print without supports, change color for the text. Prusaslicer will automaticaly detect it.</p> | [
"sign",
"door",
"doorbell",
"bell",
"pointer",
"zvonek",
"zvoncek"
] | Household > Other House Equipment | [
"305054/images/doorbell-sign-v2.jpg",
"305054/images/screenshot-2022-10-29-103540.jpg",
"305054/images/doorbell-sign-v1.jpg"
] | [
"305054/gcode/Doorbell__v0.gcode",
"305054/gcode/Doorbell__v1.gcode",
"305054/gcode/Doorbell__v2.gcode",
"305054/gcode/Doorbell__v3.gcode",
"305054/gcode/Doorbell__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/305054 | gcodes_0489.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.