model_id stringlengths 1 7 | name stringlengths 1 169 | description stringlengths 0 38.2k | tags listlengths 0 284 | printables_category stringclasses 76
values | image_paths listlengths 0 62 | gcode_paths listlengths 1 10 | license stringclasses 8
values | source stringlengths 34 40 | shard_file stringclasses 715
values |
|---|---|---|---|---|---|---|---|---|---|
305041 | Shelf Hook (20mm thick shelf) | [
"shelf",
"hook"
] | Household > Office | [
"305041/images/20221109_183935.jpg"
] | [
"305041/gcode/Shelf Hook v3__v0.gcode",
"305041/gcode/Shelf Hook v3__v1.gcode",
"305041/gcode/Shelf Hook v3__v2.gcode",
"305041/gcode/Shelf Hook v3__v3.gcode",
"305041/gcode/Shelf Hook v3__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/305041 | gcodes_0489.tar | |
304995 | Ikea dowel (#101351) | <p>Ikea #101351 dowel used in building much of Ikea's furniture. Modified with a flat base on one side for easier 3D printing.</p><p>Print horizontally (as already orientated) for better part strength so the layer lines aren't parallel to the forces they'll usually experience in furniture.</p> | [
"ikea",
"frame",
"furniture",
"dowel"
] | Household > Office | [
"304995/images/picture.jpg"
] | [
"304995/gcode/Dowel__v0.gcode",
"304995/gcode/Dowel__v1.gcode",
"304995/gcode/Dowel__v2.gcode",
"304995/gcode/Dowel__v3.gcode",
"304995/gcode/Dowel__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/304995 | gcodes_0489.tar |
304945 | Spring Spacer for Nexus Pro | [
"nerf",
"nerfmod",
"nexuspro",
"dartzone",
"dartzonenexuspro",
"nexuspromod"
] | Sports & Outdoor > Outdoor Sports | [
"304945/images/nexus-spring-spacer.jpg"
] | [
"304945/gcode/Spring Spacer 25mm Nexus__v0.gcode",
"304945/gcode/Spring Spacer 25mm Nexus__v1.gcode",
"304945/gcode/Spring Spacer 25mm Nexus__v2.gcode",
"304945/gcode/Spring Spacer 25mm Nexus__v3.gcode",
"304945/gcode/Spring Spacer 25mm Nexus__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/304945 | gcodes_0489.tar | |
304909 | GMC Sierra Shift Cable Bushing | <p>I made this model to fix a broken transmission cable bushing on my 2012 GMC Sierra 2500 so that is the only vehicle I can confirm that it works on. </p><p>I printed mine in PLA with 100% infill and it is working so far, not sure how long it will last though so I would print a couple extra to keep in the glove b... | [
"gmc",
"bushing",
"sierra"
] | Hobby & Makers > Automotive | [
"304909/images/bushing-1.jpg",
"304909/images/bushing-cable.jpg",
"304909/images/bushing-2.jpg"
] | [
"304909/gcode/Shifter Bushing GMC Sierra__v0.gcode",
"304909/gcode/Shifter Bushing GMC Sierra__v1.gcode",
"304909/gcode/Shifter Bushing GMC Sierra__v2.gcode",
"304909/gcode/Shifter Bushing GMC Sierra__v3.gcode",
"304909/gcode/Shifter Bushing GMC Sierra__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/304909 | gcodes_0489.tar |
304880 | Cat toy | <p>I was hoping the cat would play with this rather than sit between me & the computer screen. He played with it once.</p> | [
"toy",
"spinner",
"cat",
"openscad"
] | Household > Pets | [
"304880/images/cattoy03.jpg",
"304880/images/cattoy07.jpg",
"304880/images/cattoy06.jpg",
"304880/images/cattoy02.jpg",
"304880/images/cattoy01.jpg",
"304880/images/cattoy08.jpg"
] | [
"304880/gcode/cattoy.04__v0.gcode",
"304880/gcode/cattoy.04__v1.gcode",
"304880/gcode/cattoy.04__v2.gcode",
"304880/gcode/cattoy.04__v3.gcode",
"304880/gcode/cattoy.04__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/304880 | gcodes_0489.tar |
304828 | Paper stand base for menu card | <p>This is a base which can hold a laminated paper of A5 size.</p>Category: Kitchen & Dining | [
"card",
"drink",
"cards",
"thingiverse",
"menu"
] | Household > Kitchen | [
"304828/images/large_display_kds-4159_304828.jpg",
"304828/images/large_display_paperstand_-_sockel_304828.jpg",
"304828/images/large_display_kds-4194_304828.jpg",
"304828/images/large_display_stand_304828.jpg"
] | [
"304828/gcode/PaperStand_-_Sockel__v0.gcode",
"304828/gcode/PaperStand_-_Sockel__v1.gcode",
"304828/gcode/PaperStand_-_Sockel__v2.gcode",
"304828/gcode/PaperStand_-_Sockel__v3.gcode",
"304828/gcode/PaperStand_-_Sockel__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/304828 | gcodes_0489.tar |
304769 | Bed Level/Calibration Test Under 30 Minutes! | <p>Just another simple bed level test.</p> | [
"3d",
"printer",
"test",
"calibration",
"level",
"bed",
"30",
"quick",
"under",
"simple",
"minutes"
] | 3D Printers > Test Models | [
"304769/images/screenshot-133.jpg"
] | [
"304769/gcode/bed level test__v0.gcode",
"304769/gcode/bed level test__v1.gcode",
"304769/gcode/bed level test__v3.gcode",
"304769/gcode/bed level test__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/304769 | gcodes_0489.tar |
304700 | Hook for IKEA Melltorp table | <p>Snap-on hook for IKEA Melltorp table. It's best to print it with PETG.</p> | [
"table",
"ikea",
"hook",
"melltorp"
] | Household > Other House Equipment | [
"304700/images/table_hooks_2022-may-24_09-21-11pm-000_customizedview26995241679.jpg"
] | [
"304700/gcode/ikea_melltorp_table_hook__v0.gcode",
"304700/gcode/ikea_melltorp_table_hook__v1.gcode",
"304700/gcode/ikea_melltorp_table_hook__v2.gcode",
"304700/gcode/ikea_melltorp_table_hook__v3.gcode",
"304700/gcode/ikea_melltorp_table_hook__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/304700 | gcodes_0489.tar |
304692 | Mano decorativa | <p>Mano decorativa con varios usos , recomiendo usar boquilla 0.6 para que tengan mas resolución que yo en caso de que la mano valla a soportar más peso que un balón el reteñí lo recomiendo en un 20-30% como mínimo dependiendo lo que valla a cargar </p> | [] | Household > Home Decor | [
"304692/images/4ae56b5e-22bc-4b4e-989f-17f457c794ee.jpg"
] | [
"304692/gcode/Basketball Holder Hand Size 7__v0.gcode",
"304692/gcode/Basketball Holder Hand Size 7__v1.gcode",
"304692/gcode/Basketball Holder Hand Size 7__v2.gcode",
"304692/gcode/Basketball Holder Hand Size 7__v3.gcode",
"304692/gcode/Basketball Holder Hand Size 7__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/304692 | gcodes_0489.tar |
304600 | 65mm spray can holder for honeycomb wall | [
"holder",
"spraycan",
"honeycombstoragewall",
"honeycombwall"
] | Hobby & Makers > Organizers | [
"304600/images/img_20221025_073110.jpg"
] | [
"304600/gcode/spray_holder_65mm__v0.gcode",
"304600/gcode/spray_holder_65mm__v1.gcode",
"304600/gcode/spray_holder_65mm__v2.gcode",
"304600/gcode/spray_holder_65mm__v3.gcode",
"304600/gcode/spray_holder_65mm__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/304600 | gcodes_0489.tar | |
304564 | Disc Brake Chock | <p>This is a simple chock to go in place of the rotor on a bike while in transport/ during maintenance, as it can be a pain to fix if the brakes gett pressed without anything in the caliper.</p> | [
"bike",
"brakes"
] | Sports & Outdoor > Outdoor Sports | [
"304564/images/screenshot_20221028_150203.jpg"
] | [
"304564/gcode/Disc Brake Chock__v0.gcode",
"304564/gcode/Disc Brake Chock__v1.gcode",
"304564/gcode/Disc Brake Chock__v2.gcode",
"304564/gcode/Disc Brake Chock__v3.gcode",
"304564/gcode/Disc Brake Chock__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/304564 | gcodes_0489.tar |
304399 | Naruto explosive scroll | <p>Bonjour à tous.</p><p>Je vous partage de quoi faire des parchemins explosifs tiré du manga Naruto … qui n’explosent pas … désolé ….</p><p>Dessin trouvé sur le net.</p><p>Pour la modélisation, j'ai fait avec Paint 3D pour retoucher l'image et séparer les différentes couleurs pour créer un calque pour chacune d'elles.... | [
"scrolls",
"wallart",
"explosive",
"naruto",
"parchemin",
"explosif"
] | Art & Design > 2D Plates & Logos | [
"304399/images/parchemin-explosif-print.jpg",
"304399/images/parchemin-explosif-gcode.jpg",
"304399/images/parchemin-explosif-x2-gcode.jpg",
"304399/images/parchemin-explosif.jpg"
] | [
"304399/gcode/parchemin explosif__v0.gcode",
"304399/gcode/parchemin explosif__v1.gcode",
"304399/gcode/parchemin explosif__v3.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/304399 | gcodes_0489.tar |
304383 | Ferrex | [
"batteryholder",
"ferrex"
] | Hobby & Makers > Tools | [
"304383/images/img_20221028_094352.jpg",
"304383/images/img_20221028_094438.jpg"
] | [
"304383/gcode/FERREX__v0.gcode",
"304383/gcode/FERREX__v1.gcode",
"304383/gcode/FERREX__v2.gcode",
"304383/gcode/FERREX__v3.gcode",
"304383/gcode/FERREX__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/304383 | gcodes_0489.tar | |
304318 | 5015 Blower Fan | <p>This is a 3-D printable 5015 blower style fan that can be 3-D printed. It works quite well and is a cool demonstration of the functional printing capabilities of our 3-D printers.</p> | [] | Gadgets > Other Gadgets | [
"304318/images/pxl_20221028_025423075.jpg"
] | [
"304318/gcode/Radial-Cooling-Fan-5015-DC12V__v0.gcode",
"304318/gcode/Radial-Cooling-Fan-5015-DC12V__v1.gcode",
"304318/gcode/Radial-Cooling-Fan-5015-DC12V__v2.gcode",
"304318/gcode/Radial-Cooling-Fan-5015-DC12V__v3.gcode",
"304318/gcode/Radial-Cooling-Fan-5015-DC12V__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/304318 | gcodes_0489.tar |
304314 | Pan de Muerto | <p>🦴🥯 🍩💀 <strong>Día de Muertos</strong> is one of the most famous Mexican traditions worldwide, celebrated on November 1st & 2nd.</p><p>An important element of this tradition is <strong>Pan de Muerto</strong>, or Bread of the Dead, a sweet treat made of spongy bread sprinkled with sesame or sugar, in the shape... | [
"halloween",
"party",
"replica",
"prop",
"fun",
"death",
"food",
"bread",
"dia",
"pan",
"mexican",
"muertos",
"dead",
"holiday",
"treat",
"altar",
"sanchez",
"celebration",
"donut",
"mexico",
"diadelosmuertos",
"danysanchez",
"dany",
"diademuertos",
"ofrenda",
"muer... | Seasonal designs > Autumn & Halloween | [
"304314/images/img_4146.jpg",
"304314/images/img_4145.jpg",
"304314/images/altar-4.jpg",
"304314/images/screen-shot-2022-10-28-at-120228-pm.jpg",
"304314/images/altar-1.jpg",
"304314/images/screen-shot-2022-10-28-at-120238-pm.jpg",
"304314/images/screen-shot-2022-10-28-at-120234-pm.jpg"
] | [
"304314/gcode/Pan-de-Muerto-Dany-Sanchez__v0.gcode",
"304314/gcode/Pan-de-Muerto-Dany-Sanchez__v1.gcode",
"304314/gcode/Pan-de-Muerto-Dany-Sanchez__v2.gcode",
"304314/gcode/Pan-de-Muerto-Dany-Sanchez__v3.gcode",
"304314/gcode/Pan-de-Muerto-Dany-Sanchez__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/304314 | gcodes_0489.tar |
304296 | 2010 Ford Fusion Sport MAF adapter for conical intake v2 (no supports needed) | <p>2010 Ford Fusion Sport MAF adapter for conical intake. Designed to be printed in the orientation uploaded in without supports. Designed to put an aftermarket pod filter (conical filter) on the stock intake tube while retaining the stock MAF sensor and not reducing flow.</p><p>Created this as there was no options out... | [] | Hobby & Makers > Automotive | [
"304296/images/20221027_095607.jpg"
] | [
"304296/gcode/MAF test v2.1__v0.gcode",
"304296/gcode/MAF test v2.1__v1.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/304296 | gcodes_0489.tar |
304082 | Ender 3 cable holder/mount on Z motor | [
"creality",
"ender",
"cablemanagement",
"ender3",
"cableclip",
"crealityender3"
] | 3D Printers > Creality Parts & Upgrades | [
"304082/images/img_2266.jpg",
"304082/images/img_2268.jpg",
"304082/images/img_2267.jpg"
] | [
"304082/gcode/Cable_SUP__v0.gcode",
"304082/gcode/Cable_SUP__v1.gcode",
"304082/gcode/Cable_SUP__v2.gcode",
"304082/gcode/Cable_SUP__v3.gcode",
"304082/gcode/Cable_SUP__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/304082 | gcodes_0489.tar | |
303741 | Among Us Body | <p>This is an Among Us body.</p> | [] | Toys & Games > Building Toys | [
"303741/images/screenshot-2022-10-27-152822.jpg",
"303741/images/screenshot-2022-10-27-152843.jpg",
"303741/images/screenshot-2022-10-27-152907.jpg",
"303741/images/screenshot-2022-10-27-152929.jpg",
"303741/images/screenshot-2022-10-27-152950.jpg"
] | [
"303741/gcode/Among Us Body__v0.gcode",
"303741/gcode/Among Us Body__v1.gcode",
"303741/gcode/Among Us Body__v2.gcode",
"303741/gcode/Among Us Body__v3.gcode",
"303741/gcode/Among Us Body__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/303741 | gcodes_0489.tar |
303733 | Pink Ribbon Earrings | <p>Pink ribbon earring for breast cancer awareness.</p><p>Resized and slightly remixed from this keychain:<br><a href="https://www.thingiverse.com/thing:3139496">https://www.thingiverse.com/thing:3139496</a></p><p>Printed in silk pink PLA, .12 layers, .4 nozzle. (my silk PLA is stringing a bit at present - I need to tw... | [
"earrings",
"breastcancer",
"pinkribbon"
] | Fashion > Women | [
"303733/images/20221027_120014596_ios.jpg"
] | [
"303733/gcode/PinkRibbon__v0.gcode",
"303733/gcode/PinkRibbon__v1.gcode",
"303733/gcode/PinkRibbon__v2.gcode",
"303733/gcode/PinkRibbon__v3.gcode",
"303733/gcode/PinkRibbon__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/303733 | gcodes_0489.tar |
303664 | ant trap | [] | Gadgets > Other Gadgets | [
"303664/images/20221027_005336.jpg"
] | [
"303664/gcode/ant trap__v0.gcode",
"303664/gcode/ant trap__v1.gcode",
"303664/gcode/ant trap__v2.gcode",
"303664/gcode/ant trap__v3.gcode",
"303664/gcode/ant trap__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/303664 | gcodes_0489.tar | |
303657 | Ghost Benchy (SLA) | <p>Sadly, our favourite test model and loyal companion the 3DBenchy has died.<br>But it seems its spirit lives on to scare away all the printing failures and miscalibrations.</p><p> </p><p>This cute little Ghost Benchy is an empty Hull with cloth like shape as if a Benchy dressed as a ghost on halloween for trick ... | [
"halloween",
"boat",
"ghost",
"benchmark",
"benchy",
"3dbenchy",
"cloth",
"trickortreat",
"benchyboat",
"halloween2022",
"benchyghost",
"ghostbenchy"
] | Seasonal designs > Autumn & Halloween | [
"303657/images/ghostbenchy6.jpg",
"303657/images/ghostbenchy4.jpg",
"303657/images/ghostbenchy7.jpg",
"303657/images/ghostbenchy5.jpg",
"303657/images/whatsapp-image-2022-10-27-at-082126.jpg",
"303657/images/whatsapp-image-2022-10-27-at-082126-3.jpg",
"303657/images/whatsapp-image-2022-10-27-at-082126-1... | [
"303657/gcode/GhostBenchy.sla__v0.gcode",
"303657/gcode/GhostBenchy.sla__v1.gcode",
"303657/gcode/GhostBenchy.sla__v2.gcode",
"303657/gcode/GhostBenchy.sla__v3.gcode",
"303657/gcode/GhostBenchy.sla__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/303657 | gcodes_0489.tar |
303653 | Z-axis Layer Consistency Test Print (Can be used as hangers) | <p>The test print that I made for my Linear Rails + Ballscrew Z-axis upgrade testing video:</p><figure class="media"><oembed url="https://youtu.be/I7IaxzzCtdA"></oembed></figure> | [
"test",
"testprint",
"wallhook",
"wallhanger",
"hangers"
] | 3D Printers > Test Models | [
"303653/images/1.jpg",
"303653/images/2.jpg"
] | [
"303653/gcode/Z-Axis Test V3__v0.gcode",
"303653/gcode/Z-Axis Test V3__v1.gcode",
"303653/gcode/Z-Axis Test V3__v2.gcode",
"303653/gcode/Z-Axis Test V3__v3.gcode",
"303653/gcode/Z-Axis Test V3__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/303653 | gcodes_0489.tar |
303550 | Customizable Stackable Tube/Pipe Clamp (UPDATED!) | <p><strong>Overview:</strong></p><p>My office rolls to where I need it in my home. I use a 55" curved 4K TV as my monitor (<i>equivalent to four 27" 1080p monitors in area, but way better in use</i>), mounted on a <a href="https://smile.amazon.com/gp/product/B07581Z9SM">rolling TV stand</a>. I needed to attach my Zoom ... | [
"pipe",
"customizable",
"tube",
"clamp"
] | Hobby & Makers > Mechanical Parts | [
"303550/images/pxl_20221106_203115021.jpg",
"303550/images/pxl_20221106_204115653.jpg",
"303550/images/pxl_20221106_204105016.jpg",
"303550/images/tubeclampcrossed.jpg",
"303550/images/tubeclampbothhalves.jpg",
"303550/images/tubeclampparallel.jpg",
"303550/images/tubeclamp.jpg"
] | [
"303550/gcode/TubeClampExample__v0.gcode",
"303550/gcode/TubeClampExample__v1.gcode",
"303550/gcode/TubeClampExample__v2.gcode",
"303550/gcode/TubeClampExample__v3.gcode",
"303550/gcode/TubeClampExample__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/303550 | gcodes_0489.tar |
303547 | CSGO butterfly knife | <p>it is a fun knife to just play around </p><p> </p> | [
"butterflyknife"
] | Costumes & Accessories > Props | [
"303547/images/win_20221026_20_04_41_pro.jpg"
] | [
"303547/gcode/butter_fly_knife__v0.gcode",
"303547/gcode/butter_fly_knife__v1.gcode",
"303547/gcode/butter_fly_knife__v2.gcode",
"303547/gcode/butter_fly_knife__v3.gcode",
"303547/gcode/butter_fly_knife__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/303547 | gcodes_0489.tar |
303385 | Soap holder | [] | Household > Bathroom | [
"303385/images/20221026_202929.jpg"
] | [
"303385/gcode/soap.holder__v0.gcode",
"303385/gcode/soap.holder__v1.gcode",
"303385/gcode/soap.holder__v2.gcode",
"303385/gcode/soap.holder__v3.gcode",
"303385/gcode/soap.holder__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/303385 | gcodes_0489.tar | |
303239 | gopro bike mount 31mm with zipties |
<p>Gopro mount for 31mm handlebars</p>
<p>Attach it with zipties</p>
Category: 3D Printing
| [
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"303239/images/large_display_a6f7d51e-e6f8-4f47-9637-5d7ecd193255_303239.jpg",
"303239/images/large_display_4d80a45c-2ffd-4824-9e84-da0432886c17_303239.jpg"
] | [
"303239/gcode/bikemount_31mm__v0.gcode",
"303239/gcode/bikemount_31mm__v1.gcode",
"303239/gcode/bikemount_31mm__v2.gcode",
"303239/gcode/bikemount_31mm__v3.gcode",
"303239/gcode/bikemount_31mm__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/303239 | gcodes_0489.tar |
303205 | Christmas Decoration Base Remix | <p>Base with more space to allow for many different battery cases</p> | [] | Art & Design > Other Art & Designs | [
"303205/images/base.jpg"
] | [
"303205/gcode/Exquisite Migelo__v0.gcode",
"303205/gcode/Exquisite Migelo__v1.gcode",
"303205/gcode/Exquisite Migelo__v2.gcode",
"303205/gcode/Exquisite Migelo__v3.gcode",
"303205/gcode/Exquisite Migelo__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/303205 | gcodes_0489.tar |
303196 | Additional hook for IKEA Trotten (fixed version) | <p>This is an additional hook to be mounted on an IKEA Trotten desk (the fixed version, <strong>not </strong>the height adjustable). It's made to be placed on the side, between the legs of the desk, using the two big sleeve screws from underneath. </p><p>The design is optimized to be printed <strong>without suppor... | [
"ikea",
"hook",
"desk",
"bag",
"side",
"underdesk",
"baghook",
"deskhook",
"trotten"
] | Household > Office | [
"303196/images/pxl_20221027_093804960portrait.jpg",
"303196/images/pxl_20221026_152735777.jpg",
"303196/images/pxl_20221026_152724615.jpg",
"303196/images/pxl_20221026_141720490.jpg",
"303196/images/pxl_20221026_141737081.jpg",
"303196/images/pxl_20221026_141750212.jpg",
"303196/images/pxl_20221027_0938... | [
"303196/gcode/IKEA Trotten Hook v5 - by domlen__v0.gcode",
"303196/gcode/IKEA Trotten Hook v5 - by domlen__v1.gcode",
"303196/gcode/IKEA Trotten Hook v5 - by domlen__v2.gcode",
"303196/gcode/IKEA Trotten Hook v5 - by domlen__v3.gcode",
"303196/gcode/IKEA Trotten Hook v5 - by domlen__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/303196 | gcodes_0489.tar |
303138 | Knob for M8 Bolt | <p>Knob for M8 bolt. PETG, 25 infill</p> | [
"knob",
"bolt",
"m8"
] | Hobby & Makers > Tools | [
"303138/images/screenshot-26.jpg"
] | [
"303138/gcode/Knob for Bandsaw__v0.gcode",
"303138/gcode/Knob for Bandsaw__v1.gcode",
"303138/gcode/Knob for Bandsaw__v2.gcode",
"303138/gcode/Knob for Bandsaw__v3.gcode",
"303138/gcode/Knob for Bandsaw__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/303138 | gcodes_0489.tar |
303129 | N Scale Damaged Shipping Container | <p>Print in PLA standard settings. 0.1 res</p> | [
"model",
"trains",
"scalemodel",
"n"
] | Hobby & Makers > Other Ideas | [
"303129/images/screenshot-22.jpg"
] | [
"303129/gcode/Damaged 40ft Shipping Container__v0.gcode",
"303129/gcode/Damaged 40ft Shipping Container__v1.gcode",
"303129/gcode/Damaged 40ft Shipping Container__v2.gcode",
"303129/gcode/Damaged 40ft Shipping Container__v3.gcode",
"303129/gcode/Damaged 40ft Shipping Container__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/303129 | gcodes_0489.tar |
303091 | Bullet | <p>To print i used:</p><p>0.2mm resolution;</p><p>PLA filament(1.75mm);</p><p>Nozzle 180/200°C ;</p><p>Bed 40/60°C;</p><p>Print speed 40 mm/s;</p><p>No support;</p> | [
"weapon",
"gun",
"bullet"
] | Art & Design > Sculptures | [
"303091/images/untitled2.jpg"
] | [
"303091/gcode/bullet__v0.gcode",
"303091/gcode/bullet__v1.gcode",
"303091/gcode/bullet__v2.gcode",
"303091/gcode/bullet__v3.gcode",
"303091/gcode/bullet__v4.gcode"
] | GNU General Public License v2.0 | https://www.printables.com/model/303091 | gcodes_0489.tar |
303078 | Office Cube | <p>Are you totally overloaded with work?</p><p>Don't you know what to do first and what to do last?</p><p>Just let your destiny take the decision for you. The office cube takes all simple decisions, so you can focus on the hard ones.</p><p>The dice has 6 sides, that cover the following activities:</p><ul><li>coffee</li... | [] | Gadgets > Other Gadgets | [
"303078/images/img_4749.jpg"
] | [
"303078/gcode/Office_Cube__v0.gcode",
"303078/gcode/Office_Cube__v1.gcode",
"303078/gcode/Office_Cube__v2.gcode",
"303078/gcode/Office_Cube__v3.gcode",
"303078/gcode/Office_Cube__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/303078 | gcodes_0489.tar |
303047 | Test | [] | 3D Printers > Test Models | [
"303047/images/screenshot_2022-10-26-07-49-58-270_comandroidchrome.jpg"
] | [
"303047/gcode/Epic Curcan-Bombul (1)__v0.gcode",
"303047/gcode/Epic Curcan-Bombul (1)__v1.gcode",
"303047/gcode/Epic Curcan-Bombul (1)__v2.gcode",
"303047/gcode/Epic Curcan-Bombul (1)__v3.gcode",
"303047/gcode/Epic Curcan-Bombul (1)__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/303047 | gcodes_0489.tar | |
303045 | Lego kostka | [] | Toys & Games > Other Toys & Games | [
"303045/images/screenshot_2022-10-26-07-45-00-664_comandroidchrome.jpg",
"303045/images/screenshot_2022-10-26-07-45-04-856_comandroidchrome.jpg"
] | [
"303045/gcode/Swanky Leelo (2)__v0.gcode",
"303045/gcode/Swanky Leelo (2)__v1.gcode",
"303045/gcode/Swanky Leelo (2)__v2.gcode",
"303045/gcode/Swanky Leelo (2)__v3.gcode",
"303045/gcode/Swanky Leelo (2)__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/303045 | gcodes_0489.tar | |
303016 | Breakaway Chain Link | <p>Please note, that this model can print without supports. Also, one end is split so that you can join the links together (the split end slides over the solid pinched area of the next link). </p><p>Depending on the material used, the small gap on the “open” end can partially fuse. If this happens, you... | [
"halloween",
"link",
"chain"
] | Seasonal designs > Autumn & Halloween | [
"303016/images/screenshot-2022-10-25-230103.jpg",
"303016/images/pxl_20221026_025113251.jpg"
] | [
"303016/gcode/Chain Link__v0.gcode",
"303016/gcode/Chain Link__v1.gcode",
"303016/gcode/Chain Link__v2.gcode",
"303016/gcode/Chain Link__v3.gcode",
"303016/gcode/Chain Link__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/303016 | gcodes_0489.tar |
302782 | Caster wheel wrench tool | <p>This tool can be used to adjust the quite common <strong>heavy duty caster wheel</strong> stops; check the photos to see if it matches your casters.</p><p><strong>FreeCAD file is also included</strong>, so you can adjust as you like. Please share if you make your own.</p><p><strong>If you are in the EU and want to s... | [
"tool",
"wrench",
"wheel",
"freecad",
"caster"
] | Hobby & Makers > Tools | [
"302782/images/pxl_20221025_184424494.jpg",
"302782/images/pxl_20221025_184457149.jpg",
"302782/images/pxl_20221025_184536910.jpg"
] | [
"302782/gcode/Caster wrench tool__v0.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/302782 | gcodes_0489.tar |
302684 | Knife cookie cutter | Messer Ausstechform | [
"knife",
"cookiecutter",
"plaetzchen",
"plaetzchenausstecher",
"messer",
"keks",
"ausstechform",
"coockie"
] | Household > Kitchen | [
"302684/images/messer.jpg",
"302684/images/messericon.jpg"
] | [
"302684/gcode/Messer__v0.gcode",
"302684/gcode/Messer__v1.gcode",
"302684/gcode/Messer__v2.gcode",
"302684/gcode/Messer__v3.gcode",
"302684/gcode/Messer__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/302684 | gcodes_0489.tar | |
302681 | Pumpkin cookie cutter | Kürbis Ausstechform | [
"pumpkin",
"cookie",
"cookiecutter",
"plaetzchen",
"plaetzchenausstecher",
"keks",
"kuerbis",
"ausstechform"
] | Household > Kitchen | [
"302681/images/kurbis.jpg",
"302681/images/kurbisicon.jpg"
] | [
"302681/gcode/Kürbis__v0.gcode",
"302681/gcode/Kürbis__v1.gcode",
"302681/gcode/Kürbis__v2.gcode",
"302681/gcode/Kürbis__v3.gcode",
"302681/gcode/Kürbis__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/302681 | gcodes_0489.tar | |
302576 | Spikey Hollow Dragon Egg |
<p>Figured I'd try my hand at designing a dragon egg because I've seen a lot of real ones. Its hollow and has a hole in the bottom with the intent of putting a light or something inside of it.</p>
<p>You'll want good bed adhesion (and I added a brim for mine) because there's not a lot of material touching the bed.</... | [
"decoration",
"dragon",
"fantasy",
"lighting",
"egg",
"asthma",
"thingiverse",
"spikey",
"hollow",
"nosupports"
] | Household > Home Decor | [
"302576/images/large_display_773f1194-cb87-4bd0-a5b6-24dc77ff74e6_302576.jpg",
"302576/images/large_display_f9fcd3a5-6a1f-4942-9073-717bdff15eda_302576.jpg"
] | [
"302576/gcode/ce3_dragonegg4__v0.gcode",
"302576/gcode/ce3_dragonegg4__v1.gcode",
"302576/gcode/ce3_dragonegg4__v2.gcode",
"302576/gcode/ce3_dragonegg4__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/302576 | gcodes_0489.tar |
302479 | sherpa mini extruder suitable for 5mm shaft stepper motor | <p>对于同一电机，2mm轴的成本为59元，而5mm轴仅成本为8元，简直不可理喻。我在互联网上找不到修改后的版本，看来我只能自己做一个了。</p><p>For the same motor, the 2mm shaft costs 59 yuan, and the 5mm shaft only costs 8 yuan. It is unreasonable. I can't find a modified version on the Internet. It seems that I can only make one by myself.</p><p> </p> | [
"extruder",
"sherpamini",
"bmgclone",
"annexengineering"
] | 3D Printers > Other Printer Parts & Upgrades | [
"302479/images/wang-ye-bu-huo-_25-10-2022_174639_cadonshapecom.jpg"
] | [
"302479/gcode/sherpa mini (1)__v0.gcode",
"302479/gcode/sherpa mini (1)__v1.gcode",
"302479/gcode/sherpa mini (1)__v2.gcode",
"302479/gcode/sherpa mini (1)__v3.gcode",
"302479/gcode/sherpa mini (1)__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/302479 | gcodes_0489.tar |
302405 | Pixel Watch Stand | <p>Google Pixel Watch Stand with </p><ul><li>Cable route</li><li>Cable exiting rear</li><li>Hole to remove charger if needed</li><li>Narrow, Simple, Stable</li><li>Supports may be needed</li></ul> | [
"googlepixel",
"pixelwatch",
"pixelwatchstand"
] | Gadgets > Other Gadgets | [
"302405/images/w3.jpg",
"302405/images/w1.jpg",
"302405/images/w2.jpg",
"302405/images/w4.jpg"
] | [
"302405/gcode/Pixel_Watch_Stand__v0.gcode",
"302405/gcode/Pixel_Watch_Stand__v1.gcode",
"302405/gcode/Pixel_Watch_Stand__v2.gcode",
"302405/gcode/Pixel_Watch_Stand__v3.gcode",
"302405/gcode/Pixel_Watch_Stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/302405 | gcodes_0489.tar |
302347 | Flying Hellfish - The Simpsons | <p>This was really just a proof of concept idea. Wanted to see how many colour changes I could fit into one print. <br><br>I made it as thin as possible (2 layers per colour) just to hurry it along and see how it turns out. It came out a lot better than expected so I decided to post it here. <br><... | [] | Costumes & Accessories > Props | [
"302347/images/hellfish41033.jpg"
] | [
"302347/gcode/HELLFISH__v0.gcode",
"302347/gcode/HELLFISH__v2.gcode",
"302347/gcode/HELLFISH__v3.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/302347 | gcodes_0490.tar |
302279 | Model of an oil barrel | <p>Model of an oil barrel. I use this to store screwdrivers on my workbench.</p><p>Approximately 120mm tall and 80MM diameter.</p><p>Prints without supports.</p> | [] | Hobby & Makers > Other Ideas | [
"302279/images/img_1541-2.jpg"
] | [
"302279/gcode/barrel v1__v0.gcode",
"302279/gcode/barrel v1__v1.gcode",
"302279/gcode/barrel v1__v2.gcode",
"302279/gcode/barrel v1__v3.gcode",
"302279/gcode/barrel v1__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/302279 | gcodes_0490.tar |
302146 | Stanley Cup Bobblehead | <p>Stanley Cup Bobblehead for NHL fans. Fits on the spring and base of <a href="https://www.printables.com/model/224836-emoji-printer-bobbleheads">3D Printy's bobblehead designs</a>. </p><p>The spring hole in the cup may be a bit large (the spring may easily come off from the cup), you can add a bit of glue if you... | [
"bobblehead",
"stanleycup",
"nhl"
] | 3D Printers > Accessories | [
"302146/images/img_5196.jpg",
"302146/images/img_5198.jpg"
] | [
"302146/gcode/BobbleStanley__v0.gcode",
"302146/gcode/BobbleStanley__v1.gcode",
"302146/gcode/BobbleStanley__v2.gcode",
"302146/gcode/BobbleStanley__v3.gcode",
"302146/gcode/BobbleStanley__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/302146 | gcodes_0490.tar |
302128 | String spool | <p>You can use this model if you haven't got that much string left so it keeps everything tidy. </p><p>I used supports for these ones but I haven't tried without them.</p><p>I used 5% infill for this.</p> | [
"spool",
"holder",
"string"
] | Hobby & Makers > Organizers | [
"302128/images/img-20221024-wa0001.jpg",
"302128/images/img-20221024-wa0000.jpg"
] | [
"302128/gcode/String spool v3__v0.gcode",
"302128/gcode/String spool v3__v1.gcode",
"302128/gcode/String spool v3__v2.gcode",
"302128/gcode/String spool v3__v3.gcode",
"302128/gcode/String spool v3__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/302128 | gcodes_0490.tar |
302119 | AnyTone 868/878 3100mAh Battery Cover | <p>This is a battery cover for a AnyTone 868/878 or BTECH DMR-6X2 series 3100mAh radio battery. It protects the live contacts on both sides of the battery from getting shorted when tossing it into a bag.</p><p>I printed it in ASA and PLA. Both worked well, but I'd recommend the ASA or ABS if there's a chance it'll be l... | [
"holder",
"clip",
"battery",
"cover",
"antenna",
"radio",
"hamradio",
"ham",
"portable",
"lithium",
"baofeng",
"anytone",
"ht",
"anytone878",
"anytone868"
] | Gadgets > Portable Devices | [
"302119/images/pxl_20221024_115348590.jpg",
"302119/images/pxl_20221024_115315549.jpg",
"302119/images/pxl_20221024_115325365.jpg",
"302119/images/pxl_20221024_115653006.jpg"
] | [
"302119/gcode/AT878_Battery_Cover__v0.gcode",
"302119/gcode/AT878_Battery_Cover__v1.gcode",
"302119/gcode/AT878_Battery_Cover__v2.gcode",
"302119/gcode/AT878_Battery_Cover__v3.gcode",
"302119/gcode/AT878_Battery_Cover__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/302119 | gcodes_0490.tar |
301855 | Paper Towel |
<p>Paper Towel - Print standart quality</p>
Category: Household
| [
"holder",
"towel",
"paper",
"thingiverse"
] | Household > Other House Equipment | [
"301855/images/large_display_ac21f90d-b41a-47ed-ad17-4209127f4d77_301855.jpg",
"301855/images/large_display_7c645154-0cf4-4f38-bbf2-13c70cfa8f4c_301855.jpg",
"301855/images/large_display_a567d174-0f8e-4f8a-9bd4-b9269494c88a_301855.jpg"
] | [
"301855/gcode/paper-towel-ugur-uluc-design__v0.gcode",
"301855/gcode/paper-towel-ugur-uluc-design__v1.gcode",
"301855/gcode/paper-towel-ugur-uluc-design__v2.gcode",
"301855/gcode/paper-towel-ugur-uluc-design__v3.gcode",
"301855/gcode/paper-towel-ugur-uluc-design__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/301855 | gcodes_0490.tar |
301808 | ERCF Frame Legs for Voron 2.4 300mm (version 2) | <p>My Voron 2.4r2, 300mm, is fully paneled with Plexiglass. I designed these feet to be used with 450mm 2020 extrusions for the ERCF MMU and still be able to utilize panel clips, and be able to remove the plexiglass panels for printing PLA and easy maintenance without tools.</p><p>Parts</p><ul><li><a href="https:... | [
"mmu",
"voron2",
"voron24",
"ercf"
] | 3D Printers > Voron Parts & Upgrades | [
"301808/images/ercf_frame_less1.jpg",
"301808/images/ercf_mini_legs-v10.jpg",
"301808/images/ercf_frame_less2.jpg"
] | [
"301808/gcode/Foot-300_450mm__v0.gcode",
"301808/gcode/Foot-300_450mm__v1.gcode",
"301808/gcode/Foot-300_450mm__v2.gcode",
"301808/gcode/Foot-300_450mm__v3.gcode",
"301808/gcode/Foot-300_450mm__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/301808 | gcodes_0490.tar |
301773 | Motorcycle Helmet Wall Hanger | <p>I needed somewhere to store my motorcycle helmet, and thought this simple wall hanger might do the trick. I printed this in PA-CF with the Bambu Lab X1 Carbon.</p><ul><li>Layer Height 0.2mm</li><li>Filament - PA-CF</li><li>Orientation - Print on Side (better strength)</li></ul><p> </p> | [
"wall",
"hook",
"hanger",
"mount",
"helmet",
"hang",
"motorcycle"
] | Hobby & Makers > Automotive | [
"301773/images/untitled.jpg",
"301773/images/20221023_150906.jpg"
] | [
"301773/gcode/Helmet_Hanger__v0.gcode",
"301773/gcode/Helmet_Hanger__v1.gcode",
"301773/gcode/Helmet_Hanger__v2.gcode",
"301773/gcode/Helmet_Hanger__v3.gcode",
"301773/gcode/Helmet_Hanger__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/301773 | gcodes_0490.tar |
301738 | IKEA Kallax Xbox holder | <p>Simple IKEA Kallax xbox controller holder. </p><p>Matches <a href="https://www.printables.com/model/301728-ikea-kallax-headphone-holdes">https://www.printables.com/model/301728-ikea-kallax-headphone-holdes</a></p><p>Print with PLA at 20% infill and 4 perimeters. </p> | [] | Gadgets > Video Games | [
"301738/images/2022-10-22_11-17-24_img_0085.jpg"
] | [
"301738/gcode/Ikea Kallax Xbox holder__v0.gcode",
"301738/gcode/Ikea Kallax Xbox holder__v1.gcode",
"301738/gcode/Ikea Kallax Xbox holder__v2.gcode",
"301738/gcode/Ikea Kallax Xbox holder__v3.gcode",
"301738/gcode/Ikea Kallax Xbox holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/301738 | gcodes_0490.tar |
301689 | not scaled key for piggy bank | <p>Scale and print if you want.. </p> | [] | Toys & Games > Action Figures & Statues | [
"301689/images/kud0wxfcgkv91.jpg"
] | [
"301689/gcode/nokkel__v0.gcode",
"301689/gcode/nokkel__v1.gcode",
"301689/gcode/nokkel__v2.gcode",
"301689/gcode/nokkel__v3.gcode",
"301689/gcode/nokkel__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/301689 | gcodes_0490.tar |
301626 | Transport hook for hiking sticks | [] | Sports & Outdoor > Outdoor Sports | [
"301626/images/1666559982601.jpg",
"301626/images/1666559982616.jpg",
"301626/images/1666559982642.jpg",
"301626/images/1666559982629.jpg"
] | [
"301626/gcode/transport hooks__v0.gcode",
"301626/gcode/transport hooks__v1.gcode",
"301626/gcode/transport hooks__v2.gcode",
"301626/gcode/transport hooks__v3.gcode",
"301626/gcode/transport hooks__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/301626 | gcodes_0490.tar | |
301622 | Voron 0.1 LED Stripe Holder | <p>LED Stripe Holder for generic 12/24v LED Stripe or Neopixel Stripe to fit under the Gantry Extrusions of e Voron 0(.1)</p><p>Holder must be Mirrored in Slicer for the other Side.</p><p>this is a Remix of this Project: <a href="https://www.printables.com/model/241724-voron-0-led-strip">https://www.printables.co... | [
"upgrade",
"light",
"led",
"mod",
"voron",
"voron0",
"vororon01"
] | 3D Printers > Voron Parts & Upgrades | [
"301622/images/img_8791.jpg"
] | [
"301622/gcode/V0 LED Stripe Holder v2__v0.gcode",
"301622/gcode/V0 LED Stripe Holder v2__v1.gcode",
"301622/gcode/V0 LED Stripe Holder v2__v2.gcode",
"301622/gcode/V0 LED Stripe Holder v2__v3.gcode",
"301622/gcode/V0 LED Stripe Holder v2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/301622 | gcodes_0490.tar |
301610 | Kiwi's Mask from Cyberpunk Edgerunners | <p>Here's my version of Kewi's mask/ cybergear thingy from the Edgerunners anime. Not sure how well it fits, used a 3d scan of my head, and it seems to work with it, but you may need to change it for your head.</p><p>Be sure to post a make and check out my other models.</p><p>If you like my work and would like to suppo... | [
"thingiverse"
] | Costumes & Accessories > Props | [
"301610/images/large_display_bc3392aa-4345-4235-b5b2-ab6484715c24_301610.jpg",
"301610/images/large_display_128a31f8-9090-4faf-a0bd-19dc6e2feae6_301610.jpg"
] | [
"301610/gcode/kiwi__v0.gcode",
"301610/gcode/kiwi__v1.gcode",
"301610/gcode/kiwi__v2.gcode",
"301610/gcode/kiwi__v3.gcode",
"301610/gcode/kiwi__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/301610 | gcodes_0490.tar |
301606 | Anycubic Kobra LCD Screen Cover | <p>This covers the LCD screen for the Anycubic Kobra. I printed it with 10% infill (its thin so it doesn't matter) at 0.3mm layer height with a 0.6mm nozzle. 0.2mm is also fine.</p> | [
"cover",
"protector",
"screen",
"3dprinter",
"lcd",
"anycubic",
"kobra"
] | 3D Printers > Accessories | [
"301606/images/img_20221023_153801877.jpg",
"301606/images/img_20221023_153756805.jpg",
"301606/images/3.jpg",
"301606/images/2.jpg",
"301606/images/1.jpg"
] | [
"301606/gcode/Anycubic_kobra_Screen_cover__v0.gcode",
"301606/gcode/Anycubic_kobra_Screen_cover__v1.gcode",
"301606/gcode/Anycubic_kobra_Screen_cover__v2.gcode",
"301606/gcode/Anycubic_kobra_Screen_cover__v3.gcode",
"301606/gcode/Anycubic_kobra_Screen_cover__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/301606 | gcodes_0490.tar |
301479 | Broken axle repair - Bus Playmobile | <p>Broken axle repair in school bus.</p> | [
"playmobil",
"bus",
"broken",
"axle",
"5106"
] | Hobby & Makers > Other Ideas | [
"301479/images/20221023_202322.jpg",
"301479/images/20221023_202410.jpg",
"301479/images/20221023_202356.jpg",
"301479/images/20221023_202521.jpg",
"301479/images/20221023_202537.jpg"
] | [
"301479/gcode/Os do autobusu Playmobile__v0.gcode",
"301479/gcode/Os do autobusu Playmobile__v1.gcode",
"301479/gcode/Os do autobusu Playmobile__v2.gcode",
"301479/gcode/Os do autobusu Playmobile__v3.gcode",
"301479/gcode/Os do autobusu Playmobile__v4.gcode"
] | GNU General Public License v2.0 | https://www.printables.com/model/301479 | gcodes_0490.tar |
301423 | Watch Crown Winder |
<p>Created a watch crown winder. I had a watch that was really hard to grab the crown to spin. This attaches to the crown and allows you to spin the crown easily to wind, set the date, or time. It has 3 different teeth for different crown sizes.</p>
<p>**Of course, please be careful spinning it as it can put an awkw... | [
"thingiverse"
] | Fashion > Women | [
"301423/images/large_display_9d0e4d0e-b651-48fb-8e54-a60c7f8ca3f1_301423.jpg",
"301423/images/large_display_2438b9d5-5921-45c7-a68c-d82d53354335_301423.jpg",
"301423/images/large_display_0bfe0323-fd2b-43bf-8f3a-ea4ca8163577_301423.jpg"
] | [
"301423/gcode/watch_crown_winder__v0.gcode",
"301423/gcode/watch_crown_winder__v1.gcode",
"301423/gcode/watch_crown_winder__v2.gcode",
"301423/gcode/watch_crown_winder__v3.gcode",
"301423/gcode/watch_crown_winder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/301423 | gcodes_0490.tar |
301186 | Lack Enclosure Filament Guide for eSun eBox Tube | <p>I wanted to mount an eSun eBox Lite filament dryer above my IKEA Lack table enclosure.</p><p>However it has a rather large tube (6mm OD) that would not fit the usual filament guides that are used with this enclosure. So I remodelled the filament guide to have an internal diameter of 6.5mm so the supplied tube can be... | [
"filamentguide",
"ikealackenclosure",
"esunebox"
] | 3D Printers > Other Printer Parts & Upgrades | [
"301186/images/img_1650.jpg",
"301186/images/img_1656.jpg",
"301186/images/img_1657.jpg"
] | [
"301186/gcode/Lack_Enclosure_eBox_Tube_Guide__v0.gcode",
"301186/gcode/Lack_Enclosure_eBox_Tube_Guide__v1.gcode",
"301186/gcode/Lack_Enclosure_eBox_Tube_Guide__v2.gcode",
"301186/gcode/Lack_Enclosure_eBox_Tube_Guide__v3.gcode",
"301186/gcode/Lack_Enclosure_eBox_Tube_Guide__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/301186 | gcodes_0490.tar |
301166 | Hasselblad 500c/m Carl Zeiss V Series Rear Lens Cap | <p>Rear cap for Carl Zeiss Lenses for the Hasselblad V-System.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>I3 MK3S</p></div>
<p><strong>Rafts:</strong></p>
<p>Doesn't Matter</p>
<p class="detail-setting supports"><s... | [
"hasselblad",
"carlzeiss",
"hasselblad500",
"hasselbladv"
] | Gadgets > Photo & Video | [
"301166/images/large_display_20220117_115406_medium_301166.jpg",
"301166/images/large_display_20220117_115511_medium_301166.jpg"
] | [
"301166/gcode/Hasselblad_500cm_VSeries_Rear_Lens_Cap__v0.gcode",
"301166/gcode/Hasselblad_500cm_VSeries_Rear_Lens_Cap__v1.gcode",
"301166/gcode/Hasselblad_500cm_VSeries_Rear_Lens_Cap__v2.gcode",
"301166/gcode/Hasselblad_500cm_VSeries_Rear_Lens_Cap__v3.gcode",
"301166/gcode/Hasselblad_500cm_VSeries_Rear_Lens... | Creative Commons — Attribution | https://www.printables.com/model/301166 | gcodes_0490.tar |
301069 | Spojka na autodráhu Shadow | <p>Spojka na autodráhu Shadow</p> | [
"toy",
"repair"
] | Toys & Games > Board Games | [
"301069/images/dscn2731.jpg",
"301069/images/dscn2734.jpg",
"301069/images/dscn2732.jpg"
] | [
"301069/gcode/spojka-drahy__v0.gcode",
"301069/gcode/spojka-drahy__v1.gcode",
"301069/gcode/spojka-drahy__v2.gcode",
"301069/gcode/spojka-drahy__v3.gcode",
"301069/gcode/spojka-drahy__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/301069 | gcodes_0490.tar |
301020 | Christmas sock cookie cutter | Weihnachssocke Ausstechform | [
"christmas",
"cookie",
"cookiecutter",
"sock",
"plaetzchen",
"plaetzchenausstecher",
"weihnachten",
"socke",
"ausstechform"
] | Household > Kitchen | [
"301020/images/socke.jpg"
] | [
"301020/gcode/Socke__v0.gcode",
"301020/gcode/Socke__v1.gcode",
"301020/gcode/Socke__v2.gcode",
"301020/gcode/Socke__v3.gcode",
"301020/gcode/Socke__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/301020 | gcodes_0490.tar | |
300988 | Filament guide Ikea Platsa enclosure | <p>Filament guide for Ikea platsa enclsure.</p><p>Fits into a 16mm hole, a bit of glue to keep the parts together, makes for a really nice finish.</p><p>Printet in PLA with 5% infill and a brim. </p> | [
"guide",
"filamentguide",
"filemant"
] | 3D Printers > Accessories | [
"300988/images/20221022_140005.jpg",
"300988/images/20221022_150758.jpg",
"300988/images/20221022_135934.jpg"
] | [
"300988/gcode/Filament guide ikea platsa__v0.gcode",
"300988/gcode/Filament guide ikea platsa__v1.gcode",
"300988/gcode/Filament guide ikea platsa__v2.gcode",
"300988/gcode/Filament guide ikea platsa__v3.gcode",
"300988/gcode/Filament guide ikea platsa__v4.gcode"
] | GNU General Public License v2.0 | https://www.printables.com/model/300988 | gcodes_0490.tar |
300972 | Nissan Leaf bag hook | <p>A wider model of TickTock's original bag hook for the Nissan Leaf, I am going through a phase where I get my boot organised. Printed in eSun Matte PLA on its side to give it the most strength, even though these bags do not weigh much.</p> | [] | Hobby & Makers > Automotive | [
"300972/images/20221024_114400.jpg",
"300972/images/20221024_114407.jpg"
] | [
"300972/gcode/Nissan Leaf Bag Holder__v0.gcode",
"300972/gcode/Nissan Leaf Bag Holder__v1.gcode",
"300972/gcode/Nissan Leaf Bag Holder__v2.gcode",
"300972/gcode/Nissan Leaf Bag Holder__v3.gcode",
"300972/gcode/Nissan Leaf Bag Holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/300972 | gcodes_0490.tar |
300956 | TI-83 Plus Battery Cover | <p>This was designed specifically for the TI-83Plus calculator I have. It may work with other calculator models however. </p><p>I customized mine using a negative volume in PrusaSlicer! You can do the same with any design. </p> | [
"holder",
"door",
"replacement",
"battery",
"cover",
"calculator",
"batterycover",
"replacementparts",
"calculus",
"graphing"
] | Hobby & Makers > Mechanical Parts | [
"300956/images/img_8109.jpg",
"300956/images/img_8110.jpg"
] | [
"300956/gcode/TI-83Plus Battery Cover__v0.gcode",
"300956/gcode/TI-83Plus Battery Cover__v1.gcode",
"300956/gcode/TI-83Plus Battery Cover__v2.gcode",
"300956/gcode/TI-83Plus Battery Cover__v3.gcode",
"300956/gcode/TI-83Plus Battery Cover__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/300956 | gcodes_0490.tar |
300899 | Bag Strap Buckle | <p>this is a simple fix for the bag strap buckle, the zigzag design is to ensure uniform tension across the belt/strap folded section</p><p>the outer ring is a little bit thick so the buckle should not be bent easily and to guarantee strong part</p><p>it is recommended to print in 3 shells perimeter, but I just print i... | [
"bag",
"buckle",
"strap",
"beltbuckle",
"strapbuckle"
] | Fashion > Other Fashion Accessories | [
"300899/images/photo_2022-10-23_08-33-01.jpg",
"300899/images/screenshot-2022-10-23-082648.jpg"
] | [
"300899/gcode/Strap Buckle__v0.gcode",
"300899/gcode/Strap Buckle__v1.gcode",
"300899/gcode/Strap Buckle__v2.gcode",
"300899/gcode/Strap Buckle__v3.gcode",
"300899/gcode/Strap Buckle__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/300899 | gcodes_0490.tar |
300878 | Lego road plate 8x16 brick | <p>Lego road plate 8x16 brick - from new Lego City. Not 100% accurate to the original but fits.</p><p>The posted photo - extruder 0.2mm and 0.2mm layer height. I tried to print it upside down to get nice flat top. However the recessed studs with supports did not look nicely.</p> | [
"plate",
"road",
"brick"
] | Toys & Games > Building Toys | [
"300878/images/img_20221023_084032.jpg",
"300878/images/img_20221023_084045.jpg",
"300878/images/road-top.jpg",
"300878/images/road-bottom.jpg"
] | [
"300878/gcode/LEGOGeneratorTool-flat-piece-8x16-v03__v0.gcode",
"300878/gcode/LEGOGeneratorTool-flat-piece-8x16-v03__v1.gcode",
"300878/gcode/LEGOGeneratorTool-flat-piece-8x16-v03__v2.gcode",
"300878/gcode/LEGOGeneratorTool-flat-piece-8x16-v03__v3.gcode",
"300878/gcode/LEGOGeneratorTool-flat-piece-8x16-v03_... | Creative Commons — Attribution | https://www.printables.com/model/300878 | gcodes_0490.tar |
300836 | key for electrical cut off switch | [
"electrical",
"cutoff"
] | Hobby & Makers > Electronics | [
"300836/images/img_20221022_224430069.jpg"
] | [
"300836/gcode/huvudströmbrytare__v0.gcode",
"300836/gcode/huvudströmbrytare__v1.gcode",
"300836/gcode/huvudströmbrytare__v2.gcode",
"300836/gcode/huvudströmbrytare__v3.gcode",
"300836/gcode/huvudströmbrytare__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/300836 | gcodes_0490.tar | |
300698 | ddl sharps razor blade box container | <p>simple box container to store used DE safety razor blades</p><p>be careful when trowing them in the bin, might be very dangerous for you and other operators</p><p>print as in the model, i'd recommend not to use layer height greater than 0,2mm</p><p>pretty small dimensions, 30x30x50mm</p> | [
"razor",
"boardgame",
"razorblade",
"razorholder",
"disposal",
"safetyrazor",
"razorgillette",
"razorbladeholder",
"doubleedgerazor",
"razors",
"sharpsdisposal",
"corazon",
"bladedisposal"
] | Household > Bathroom | [
"300698/images/photo_2022-10-22_20-59-18.jpg",
"300698/images/photo_2022-10-22_20-54-33.jpg"
] | [
"300698/gcode/ddl blade box v1__v0.gcode",
"300698/gcode/ddl blade box v1__v1.gcode",
"300698/gcode/ddl blade box v1__v2.gcode",
"300698/gcode/ddl blade box v1__v3.gcode",
"300698/gcode/ddl blade box v1__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/300698 | gcodes_0490.tar |
300647 | Leveling Wheel | <p>Just print this wheels and just push 4 nuts in the space in the middle</p><p>Works nice</p><p>Nice design</p> | [] | 3D Printers > Other Printer Parts & Upgrades | [
"300647/images/bez-nazvu.jpg",
"300647/images/312107922_776148253683600_8987260996339566173_n.jpg",
"300647/images/263144125_455539329896137_6741876815730068853_n.jpg"
] | [
"300647/gcode/leveling m4__v0.gcode",
"300647/gcode/leveling m4__v1.gcode",
"300647/gcode/leveling m4__v2.gcode",
"300647/gcode/leveling m4__v3.gcode",
"300647/gcode/leveling m4__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/300647 | gcodes_0490.tar |
300632 | Raspberry Pi Zero Camera case |
<p>Case for <a href="https://shop.pimoroni.com/products/raspberry-pi-zero-camera-module">Camera Module for Raspberry Pi Zero</a></p>
<p>This is just bottom part of the case, take top covers from <a href="https://www.thingiverse.com/thing:1689283">Raspberry Pi Zero v1.3 simple case</a></p>
<h3>Post-Printing</h3>
<p>D... | [
"raspberrypicase",
"raspberrypizero",
"thingiverse",
"raspberrypicamera"
] | Hobby & Makers > Electronics | [
"300632/images/285731c4d68e4653f173ac23783bd80a_display_large_300632.jpg",
"300632/images/81e0efbd7a62cfc42e5fa8efe0765ddd_display_large_300632.jpg"
] | [
"300632/gcode/pi0cam_bottom__v0.gcode",
"300632/gcode/pi0cam_bottom__v1.gcode",
"300632/gcode/pi0cam_bottom__v2.gcode",
"300632/gcode/pi0cam_bottom__v3.gcode",
"300632/gcode/pi0cam_bottom__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/300632 | gcodes_0490.tar |
300468 | DJI digidapter Eachine pro58 cover | <p>What i changed ?</p><ol><li>antena holes are moved 1mm higher</li><li>display hole is smaller</li><li>side button is better protected</li><li>pre-marked hole for power LED and antenna LED</li></ol><p>so if you print out of the translucent material, you will see the antenna red and the power green circle shine throug... | [
"dji",
"eachinepro58",
"digidapter"
] | Hobby & Makers > RC & Robotics | [
"300468/images/1.jpg",
"300468/images/2.jpg",
"300468/images/3.jpg",
"300468/images/4.jpg",
"300468/images/6.jpg",
"300468/images/8.jpg",
"300468/images/9.jpg"
] | [
"300468/gcode/Eachine_Pro58__v0.gcode",
"300468/gcode/Eachine_Pro58__v1.gcode",
"300468/gcode/Eachine_Pro58__v2.gcode",
"300468/gcode/Eachine_Pro58__v3.gcode",
"300468/gcode/Eachine_Pro58__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/300468 | gcodes_0490.tar |
300389 | Wieszak blatowy | [
"wieszak"
] | Gadgets > Other Gadgets | [
"300389/images/zrzut-ekranu-2022-10-22-143526.jpg"
] | [
"300389/gcode/Dazzling Maimu__v0.gcode",
"300389/gcode/Dazzling Maimu__v1.gcode",
"300389/gcode/Dazzling Maimu__v2.gcode",
"300389/gcode/Dazzling Maimu__v3.gcode",
"300389/gcode/Dazzling Maimu__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/300389 | gcodes_0490.tar | |
300353 | Ender 3 S1 Drawer with Raspberry Pi | <p>This model is a replacement for the drawer of an Ender 3 S1. A Raspberry Pi can be mounted in the drawer. Ethernet and USB ports are accessible from the front. A small coutout can be used to route the power cord to the Pi.</p><p>The original drawer uses magnets to hold the drawer in place. In my opinion it sits firm... | [
"raspberrypi",
"klipper",
"ender3s1"
] | 3D Printers > Creality Parts & Upgrades | [
"300353/images/20221022_133457.jpg"
] | [
"300353/gcode/Drawer__v0.gcode",
"300353/gcode/Drawer__v2.gcode",
"300353/gcode/Drawer__v3.gcode",
"300353/gcode/Drawer__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/300353 | gcodes_0490.tar |
300225 | Mandalorian and Grogu with base | <p>I printed at 1.2 with supports everywhere. Came out great!</p> | [
"mandalorian",
"grogu"
] | Toys & Games > Action Figures & Statues | [
"300225/images/20221024_041752.jpg",
"300225/images/20221024_041730.jpg"
] | [
"300225/gcode/mandogrogubase__v0.gcode",
"300225/gcode/mandogrogubase__v1.gcode",
"300225/gcode/mandogrogubase__v2.gcode",
"300225/gcode/mandogrogubase__v3.gcode",
"300225/gcode/mandogrogubase__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/300225 | gcodes_0490.tar |
300207 | ADXL345 Mount for Mini Afterburner with Umbilical Breakboard | <p>A remix that fits the Miniafterburner with an umbilical breakboard fitted</p> | [
"mount",
"voron",
"adxl345",
"inputshaping",
"vorondesign",
"inputshaper",
"voron01",
"miniafterburner"
] | 3D Printers > Other Printer Parts & Upgrades | [
"300207/images/img_0027.jpg"
] | [
"300207/gcode/ADXL345_Mount_with umbilical__v0.gcode",
"300207/gcode/ADXL345_Mount_with umbilical__v1.gcode",
"300207/gcode/ADXL345_Mount_with umbilical__v2.gcode",
"300207/gcode/ADXL345_Mount_with umbilical__v3.gcode",
"300207/gcode/ADXL345_Mount_with umbilical__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/300207 | gcodes_0490.tar |
300168 | Voron jig | <p>This is a jig that will be usefull in building the Voron clockwork1 extruder. It will adjust the 3.2 mm specification.</p> | [
"jig"
] | 3D Printers > Accessories | [
"300168/images/20221021_204817.jpg",
"300168/images/20221021_204805.jpg"
] | [
"300168/gcode/Gabarit clockwork-Body__v0.gcode",
"300168/gcode/Gabarit clockwork-Body__v1.gcode",
"300168/gcode/Gabarit clockwork-Body__v2.gcode",
"300168/gcode/Gabarit clockwork-Body__v3.gcode",
"300168/gcode/Gabarit clockwork-Body__v4.gcode"
] | GNU General Public License v2.0 | https://www.printables.com/model/300168 | gcodes_0490.tar |
300044 | pringle lifter | [] | Household > Kitchen | [
"300044/images/img_5794.jpg"
] | [
"300044/gcode/pringle lifter__v0.gcode",
"300044/gcode/pringle lifter__v1.gcode",
"300044/gcode/pringle lifter__v2.gcode",
"300044/gcode/pringle lifter__v3.gcode",
"300044/gcode/pringle lifter__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/300044 | gcodes_0490.tar | |
299979 | Adjustable motorcycle clutch/brake lever | <p><strong>DISCLAIMER:</strong><br>I am not responsible for any damages done to you or your bike. I had this original piece fall off and I could still ride my motorcycle just fine without it! It only bothered me that the handle was short and didn't have a bump at the end to prevent hand from slipping off. <br>&nbs... | [
"adjustable",
"brake",
"motorcycles",
"lever",
"clutch",
"motorcycle"
] | Hobby & Makers > Automotive | [
"299979/images/img_20200828_085142.jpg",
"299979/images/untitled.jpg"
] | [
"299979/gcode/Motorcycle Lever__v0.gcode",
"299979/gcode/Motorcycle Lever__v1.gcode",
"299979/gcode/Motorcycle Lever__v2.gcode",
"299979/gcode/Motorcycle Lever__v3.gcode",
"299979/gcode/Motorcycle Lever__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/299979 | gcodes_0490.tar |
299934 | Folder paper clamp | <p>Prints in any material without support. </p><p> </p> | [
"punch",
"folder",
"holepunch"
] | Household > Office | [
"299934/images/img20221021192245.jpg"
] | [
"299934/gcode/OrdnerHalter v2__v0.gcode",
"299934/gcode/OrdnerHalter v2__v1.gcode",
"299934/gcode/OrdnerHalter v2__v2.gcode",
"299934/gcode/OrdnerHalter v2__v3.gcode",
"299934/gcode/OrdnerHalter v2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/299934 | gcodes_0490.tar |
299926 | iPhone 12/13 Sunshade Hood for DJI Controller (and others) | <p>Sun shade designed for iPhone 12 (and others when scaled - see note below). It provides better visibility in direct sunlight. As seen on pictures I tried both PETG and TPU materials. I think that TPU is better as it fits the phone nicely, fits into a bag easily and completely blocks light. PETG is good too BUT make ... | [
"iphone",
"dji",
"shade",
"sun",
"djimavic",
"hood",
"sunshade",
"djimavicair2",
"sunshield"
] | Gadgets > Photo & Video | [
"299926/images/img_0309.jpg",
"299926/images/img_0313.jpg",
"299926/images/img_0311.jpg",
"299926/images/img_0308.jpg",
"299926/images/img_0310.jpg",
"299926/images/img_4291.jpg"
] | [
"299926/gcode/iphone 12 shade__v0.gcode",
"299926/gcode/iphone 12 shade__v1.gcode",
"299926/gcode/iphone 12 shade__v2.gcode",
"299926/gcode/iphone 12 shade__v3.gcode",
"299926/gcode/iphone 12 shade__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/299926 | gcodes_0490.tar |
299787 | shaver holder for bathroom/shower | <p>a small holder for a shaver</p>
Category: 3D Printing | [
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"299787/images/large_display_baf6ade6-9bf4-47ff-9b32-99ff9a674364_299787.jpg",
"299787/images/pxl_20221026_102154857.jpg",
"299787/images/pxl_20221026_102201859.jpg"
] | [
"299787/gcode/shaver3hook__v0.gcode",
"299787/gcode/shaver3hook__v1.gcode",
"299787/gcode/shaver3hook__v2.gcode",
"299787/gcode/shaver3hook__v3.gcode",
"299787/gcode/shaver3hook__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/299787 | gcodes_0490.tar |
299630 | Raspberry Pi 3B/3B+/4B Mount | <p>Raspberry Pi 3B/3B+/4B Mount<br>You will need x4 M2.5 screws with 3-8mm length to mount Raspberry Pi, x2 M3 nuts and x2 M3 screws. M3 screws length depends on where do you want to mount bracket</p><p>Sizes were taken from <a href="https://www.raspberrypi.com/documentation/computers/raspberry-pi.html">https://www.ras... | [
"raspberrypi",
"raspberrypicase",
"raspberrypi4",
"raspberrypi3",
"raspberrypihousing",
"raspberrypimount",
"raspberrymount",
"raspberrypibracket"
] | 3D Printers > Accessories | [
"299630/images/screenshot-2022-10-21-at-113140.jpg"
] | [
"299630/gcode/raspberry-pi-mount__v0.gcode",
"299630/gcode/raspberry-pi-mount__v1.gcode",
"299630/gcode/raspberry-pi-mount__v2.gcode",
"299630/gcode/raspberry-pi-mount__v3.gcode",
"299630/gcode/raspberry-pi-mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/299630 | gcodes_0490.tar |
299473 | U Outdoor Stake | <p>Improved outdoor stake, remix of wyatts; added sharp tip, inset to reduce material, remeshed to allow easy further remixes</p><p>Might be worth printing vertically and adding multiple bottom layers to make sure the bottom is strong for hammering, otherwise you have to be careful. I printed with 4 perimeters</p><p>&n... | [] | Household > Outdoor & Garden | [
"299473/images/20221020_160635.jpg",
"299473/images/20221020_160640.jpg"
] | [
"299473/gcode/remeshed_stake__v0.gcode",
"299473/gcode/remeshed_stake__v1.gcode",
"299473/gcode/remeshed_stake__v2.gcode",
"299473/gcode/remeshed_stake__v3.gcode",
"299473/gcode/remeshed_stake__v4.gcode"
] | GNU General Public License v2.0 | https://www.printables.com/model/299473 | gcodes_0490.tar |
299456 | Oral B toothbrush holder | <p>Toothbrush holder mounted with 3m removable thingys.</p> | [
"bathroom",
"toothbrush",
"oralb",
"toothbrushholder"
] | Household > Bathroom | [
"299456/images/wechat-image_20221031214414.jpg",
"299456/images/wechat-image_20221031214428.jpg",
"299456/images/wechat-image_20221031214446.jpg"
] | [
"299456/gcode/Toothbrush Holder__v0.gcode",
"299456/gcode/Toothbrush Holder__v1.gcode",
"299456/gcode/Toothbrush Holder__v2.gcode",
"299456/gcode/Toothbrush Holder__v3.gcode",
"299456/gcode/Toothbrush Holder__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/299456 | gcodes_0490.tar |
299367 | Wire holder for rotary clothesline / Drahthalter für Wäschespinne | <p>This wire holder is designed for a wire with a diameter of 2.5 mm and a base frame with a diameter of 14.5 mm. Printed with 50% infill.</p><p>You are welcome to change the stp file according to your measurements.</p><p>Or you write down what dimensions you need and I will add the adapter for you!</p><p>Have fun repa... | [
"adapter",
"repair",
"reparatur",
"homerepair"
] | Household > Other House Equipment | [
"299367/images/rw_03.jpg",
"299367/images/rw_02.jpg",
"299367/images/rw_04.jpg",
"299367/images/rw_05.jpg",
"299367/images/rw_06.jpg"
] | [
"299367/gcode/Drahthalter_03__v0.gcode",
"299367/gcode/Drahthalter_03__v1.gcode",
"299367/gcode/Drahthalter_03__v2.gcode",
"299367/gcode/Drahthalter_03__v3.gcode",
"299367/gcode/Drahthalter_03__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/299367 | gcodes_0490.tar |
299357 | Dog Bone Coat Hook | <p>Bone style coat / leash hook. </p><p>I originally had the dog names on the model, but removed it for this file. If i figure out how to make a modifier I will repost up</p><p> </p><p>I printed with some extra perimeters and printed flat side down, may be better ways to orientate. Screws are #8 x 1 ¾" which ... | [
"dog",
"coathook",
"bone",
"leash"
] | Household > Home Decor | [
"299357/images/img_3768.jpg",
"299357/images/img_3767.jpg",
"299357/images/img_3769.jpg"
] | [
"299357/gcode/BoneHook___v0.gcode",
"299357/gcode/BoneHook___v1.gcode",
"299357/gcode/BoneHook___v2.gcode",
"299357/gcode/BoneHook___v3.gcode",
"299357/gcode/BoneHook___v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/299357 | gcodes_0490.tar |
299080 | Cali cube | [] | 3D Printers > Test Models | [
"299080/images/bild_2022-10-20_112903094.jpg"
] | [
"299080/gcode/cali cube 20x20__v0.gcode",
"299080/gcode/cali cube 20x20__v1.gcode",
"299080/gcode/cali cube 20x20__v2.gcode",
"299080/gcode/cali cube 20x20__v3.gcode",
"299080/gcode/cali cube 20x20__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/299080 | gcodes_0490.tar | |
299053 | 3 in one PTFE Lubricant holder Gridfinity 1x1 | <p>Organizes the 3 In One PTFE (or similar bottled alternative) Lubricant into you existing Gridfinity setup only taking 1x1 bit of space. You might think that the exposed sides would allow the bottle to slip out the sides easily but it actually stays in place very well. Have a look for yourself: </p><... | [
"ptfe",
"lubricant",
"gridfinity"
] | Hobby & Makers > Organizers | [
"299053/images/gridfinity-ptfe-lube-group.jpg",
"299053/images/gridfinity-ptfe-lube-solo.jpg"
] | [
"299053/gcode/PTFE Lube Holder Gridfinity__v0.gcode",
"299053/gcode/PTFE Lube Holder Gridfinity__v1.gcode",
"299053/gcode/PTFE Lube Holder Gridfinity__v2.gcode",
"299053/gcode/PTFE Lube Holder Gridfinity__v3.gcode",
"299053/gcode/PTFE Lube Holder Gridfinity__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/299053 | gcodes_0490.tar |
298983 | Louver Blinds Bracket | <p>The blinds in my room were hanging loose, and inspection showed it was due to one bracket being broken. The other bracket was cracked and soon to break due to UV damage. Looking through all the rooms revealed that the blinds still worked but virtually all of the bottom bracket holders were broken or about to break. ... | [
"blinds",
"louver",
"windowblinds"
] | Household > Other House Equipment | [
"298983/images/60ac670b-0e71-4d78-b717-83da6431ae53.jpg",
"298983/images/331ea131-8ecb-4594-b2b1-962fc2e33408.jpg",
"298983/images/e131e9c4-6aef-44cd-b8be-2cee9c3478f0.jpg",
"298983/images/50f160e9-890b-464e-8a14-a11cd615a80e.jpg"
] | [
"298983/gcode/BlindsBracketStrong-BracketUprightBody__v0.gcode",
"298983/gcode/BlindsBracketStrong-BracketUprightBody__v1.gcode",
"298983/gcode/BlindsBracketStrong-BracketUprightBody__v2.gcode",
"298983/gcode/BlindsBracketStrong-BracketUprightBody__v3.gcode",
"298983/gcode/BlindsBracketStrong-BracketUpright... | Creative Commons — Attribution | https://www.printables.com/model/298983 | gcodes_0490.tar |
298965 | Freeze Flat | <p>Print two of these and use Velcro cable ties to put light pressure on bags intended for freezing to keep them flat for storage until frozen.</p><p>Useful for freezer organization, storage, and space saving.</p><p>Fits Medela breast milk bags perfectly which can then be organized into gallon ziplock bags for future u... | [
"organizer",
"storage",
"freezer",
"spacesaving",
"freeze",
"freezeflat",
"breastmilk"
] | Hobby & Makers > Organizers | [
"298965/images/capture.jpg",
"298965/images/capture2.jpg"
] | [
"298965/gcode/FreezeFlat__v0.gcode",
"298965/gcode/FreezeFlat__v1.gcode",
"298965/gcode/FreezeFlat__v2.gcode",
"298965/gcode/FreezeFlat__v3.gcode",
"298965/gcode/FreezeFlat__v4.gcode"
] | BSD License | https://www.printables.com/model/298965 | gcodes_0490.tar |
298933 | Shampoo Pump dispenser bottle stop (Parametric) | <p>A simple parametric fusion 360 file for a pump stop that i lost.<br>It's really handy for travelling, as it stops the bottle for getting any fluid out by mistake.<br><br>I include the fusion file so you can just input your dimensions and print it.<br>Hope this helps some of you.</p> | [] | Household > Bathroom | [
"298933/images/314905922_701994977926597_3422694597494002871_n.jpg",
"298933/images/315524498_512800124083121_5632703889956207810_n.jpg"
] | [
"298933/gcode/Squirt bottle stop parametric__v0.gcode",
"298933/gcode/Squirt bottle stop parametric__v1.gcode",
"298933/gcode/Squirt bottle stop parametric__v2.gcode",
"298933/gcode/Squirt bottle stop parametric__v3.gcode",
"298933/gcode/Squirt bottle stop parametric__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/298933 | gcodes_0490.tar |
298874 | umbrella handle! | <p>Last winter my wife's umbrella broke!<br>My wife was going to throw it!<br>But my Prusa Mini + came to her rescue! .... saving him from his sad fate!</p> | [
"handle",
"umbrella",
"umbrellahandle"
] | Household > Other House Equipment | [
"298874/images/img_20221019_213852.jpg",
"298874/images/img20221019213955.jpg"
] | [
"298874/gcode/umbrellahandle__v0.gcode",
"298874/gcode/umbrellahandle__v1.gcode",
"298874/gcode/umbrellahandle__v2.gcode",
"298874/gcode/umbrellahandle__v3.gcode",
"298874/gcode/umbrellahandle__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/298874 | gcodes_0490.tar |
298862 | Empire State Building |
<p>Easy to print on every 3D Printer!</p>
<p>You can scale the object if wish</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Ender 3</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-setting sup... | [
"thingiverse"
] | Gadgets > Other Gadgets | [
"298862/images/large_display_powerful_duup-robo_1_298862.jpg"
] | [
"298862/gcode/Powerful_Duup-Robo_1__v0.gcode",
"298862/gcode/Powerful_Duup-Robo_1__v1.gcode",
"298862/gcode/Powerful_Duup-Robo_1__v2.gcode",
"298862/gcode/Powerful_Duup-Robo_1__v3.gcode",
"298862/gcode/Powerful_Duup-Robo_1__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/298862 | gcodes_0490.tar |
298809 | oprav šnorchlu | [] | Seasonal designs > Summer | [
"298809/images/20220628_215034.jpg",
"298809/images/20220628_215126.jpg"
] | [
"298809/gcode/s2__v0.gcode",
"298809/gcode/s2__v1.gcode",
"298809/gcode/s2__v2.gcode",
"298809/gcode/s2__v3.gcode",
"298809/gcode/s2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/298809 | gcodes_0490.tar | |
298796 | HSW_6xM6 Nozzle Holder | <p>I prefer to keep the bulk of my spare nozzles labelled and tucked away in a drawer.</p><p>I started helping a friend print miniatures, but wanted to also swap my printer back to larger nozzles for my own projects. The original of this model offered a quick and easy way to put together a custom local-storage so... | [
"nozzleholder",
"honeycombstoragewall",
"hsw"
] | Hobby & Makers > Organizers | [
"298796/images/img_20221019_141037.jpg"
] | [
"298796/gcode/HSW_6xM6NozzleHolder__v0.gcode",
"298796/gcode/HSW_6xM6NozzleHolder__v1.gcode",
"298796/gcode/HSW_6xM6NozzleHolder__v2.gcode",
"298796/gcode/HSW_6xM6NozzleHolder__v3.gcode",
"298796/gcode/HSW_6xM6NozzleHolder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/298796 | gcodes_0490.tar |
298670 | 027 Vorsicht: Spielende Zahlen! Pythagoras | <p>Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium.</p><p>Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.</p> | [
"puzzle",
"education",
"learning",
"mathematics"
] | Learning > Math | [
"298670/images/img_6629.jpg",
"298670/images/img_6627.jpg",
"298670/images/img_6628.jpg",
"298670/images/img_6626.jpg"
] | [
"298670/gcode/Pythagoras Beweis__v0.gcode",
"298670/gcode/Pythagoras Beweis__v1.gcode",
"298670/gcode/Pythagoras Beweis__v2.gcode",
"298670/gcode/Pythagoras Beweis__v3.gcode",
"298670/gcode/Pythagoras Beweis__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/298670 | gcodes_0490.tar |
298629 | Hydraulic Coupler Dust Cap ISO-A | <p>Just a replacement of something like:</p><p> <img class="image_resized" style="width:37.48%;" src="https://media.printables.com/media/prints/298629/rich_content/b84687b3-074f-42eb-9b4b-9a2b670ed611/3-4-hydraulic-coupler-dust-cap.jpg#%7B%22uuid%22%3A%222dc38fa7-ed9f-485c-bb82-7d1564dd7fe4%22%2C%22w%22%3A466%2C%2... | [
"functional",
"cover",
"coupling",
"functionalprint",
"hydraulic",
"hydraulics"
] | Hobby & Makers > Mechanical Parts | [
"298629/images/hydraulic-coupler-dust-cap.jpg"
] | [
"298629/gcode/UNC Hydraulics Cover__v0.gcode",
"298629/gcode/UNC Hydraulics Cover__v1.gcode",
"298629/gcode/UNC Hydraulics Cover__v2.gcode",
"298629/gcode/UNC Hydraulics Cover__v3.gcode",
"298629/gcode/UNC Hydraulics Cover__v4.gcode"
] | GNU General Public License v2.0 | https://www.printables.com/model/298629 | gcodes_0490.tar |
298505 | Stream Deck Mk2 Stand | <p>I recently bought a Stream Deck to use in Fusion 360.</p><p>It's a lovely little gadget but I wanted to move it up to the same height as my keyboard rather than just sitting it on the desk.<br><br>I created this stand to lift the deck up and tilt it forwards slightly.<br>It has 10mm cutouts in the base for rubber gr... | [] | Gadgets > Computers | [
"298505/images/2022-10-18-231651.jpg",
"298505/images/2022-10-18-231700.jpg",
"298505/images/2022-10-18-231713.jpg",
"298505/images/2022-10-18-231720.jpg"
] | [
"298505/gcode/Stream Deck 2 Corsair Keyboard Stand v5__v0.gcode",
"298505/gcode/Stream Deck 2 Corsair Keyboard Stand v5__v1.gcode",
"298505/gcode/Stream Deck 2 Corsair Keyboard Stand v5__v2.gcode",
"298505/gcode/Stream Deck 2 Corsair Keyboard Stand v5__v3.gcode",
"298505/gcode/Stream Deck 2 Corsair Keyboard... | Creative Commons — Attribution | https://www.printables.com/model/298505 | gcodes_0490.tar |
298398 | Magcoupler for PTFE tubes | <p>I wanted to use the magnetic couplers but wanted to stay away from Fusion360. Working around the PC4-M10 socket, I reworked the magnet cups so they aren't in contact and risk pulling out when you disconnect. The magnets are inserted from the opposite side.</p><p>Included STL are designed for ¼" puck magnets. I have ... | [
"magnetic",
"ptfe",
"tube",
"coupler"
] | 3D Printers > Other Printer Parts & Upgrades | [
"298398/images/img_20221019_201059813.jpg",
"298398/images/img_20221023_223332853_burst001.jpg"
] | [
"298398/gcode/Magcoupler__v0.gcode",
"298398/gcode/Magcoupler__v1.gcode",
"298398/gcode/Magcoupler__v2.gcode",
"298398/gcode/Magcoupler__v3.gcode",
"298398/gcode/Magcoupler__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/298398 | gcodes_0490.tar |
298393 | Cable Hook (v1) | <p>Originally designed in Inventor 2023, sliced in PrusaSlicer, and printed on a Monoprice Mini Select V2.</p> | [
"cable",
"cablemanagement",
"wallhook"
] | Hobby & Makers > Organizers | [
"298393/images/pxl_20221019_014249486.jpg"
] | [
"298393/gcode/CABLE HOOK V1__v0.gcode",
"298393/gcode/CABLE HOOK V1__v1.gcode",
"298393/gcode/CABLE HOOK V1__v2.gcode",
"298393/gcode/CABLE HOOK V1__v3.gcode",
"298393/gcode/CABLE HOOK V1__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/298393 | gcodes_0490.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.