model_id stringlengths 1 7 | name stringlengths 1 169 | description stringlengths 0 38.2k | tags listlengths 0 284 | printables_category stringclasses 76
values | image_paths listlengths 0 62 | gcode_paths listlengths 1 10 | license stringclasses 8
values | source stringlengths 34 40 | shard_file stringclasses 692
values |
|---|---|---|---|---|---|---|---|---|---|
292128 | Ikea Lack mobile phone & remote tray | <p>Please note, that there are subtle variations in Ikea Lack leg width - if the tray is a bit bigger for you, you have several options:</p><ul><li>put a dab of glue gun material on the inside and let cool down 😊</li><li>rotate your Ikea Lack leg 🙃 they are not perfectly square</li><li>swap legs 😀 if you find one th... | [
"ikea",
"holder",
"lack",
"tray",
"remote",
"mobile",
"basket"
] | Household > Living Room | [
"292128/images/2330a37e-3f30-470a-bed4-8cd95c64d89c.jpg",
"292128/images/861ba1d4-03b0-46e3-be62-70e38178e4af.jpg",
"292128/images/cc1581ff-0c2f-4b18-ac86-e91436f0db0c.jpg",
"292128/images/dda433ef-f18e-4624-afef-98df69edf023.jpg"
] | [
"292128/gcode/LackDrz_v3__v0.gcode",
"292128/gcode/LackDrz_v3__v1.gcode",
"292128/gcode/LackDrz_v3__v2.gcode",
"292128/gcode/LackDrz_v3__v3.gcode",
"292128/gcode/LackDrz_v3__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/292128 | gcodes_0491.tar |
292106 | High Poly Pokemon Diglett - No Support | <p>Just a little test model I made of the Pokemon Diglett.</p><p>High Poly</p><p>Prints without any support.</p><p> </p><p><a href="https://www.tiktok.com/@3dfilaprint/video/7201112740109290757">https://www.tiktok.com/@3dfilaprint/video/7201112740109290757</a></p><h3>Print Settings</h3><p><strong>Printer Brand:</s... | [
"pokemon",
"thingiverse",
"diglett",
"ground",
"highpoly"
] | Toys & Games > Outdoor Toys | [
"292106/images/large_display_e2b813ac-5e49-4a05-825c-4c1ae1120739_292106.jpg",
"292106/images/large_display_2e55f1e0-000c-4b29-b56a-0c64d151abc2_292106.jpg"
] | [
"292106/gcode/diglett__v0.gcode",
"292106/gcode/diglett__v1.gcode",
"292106/gcode/diglett__v2.gcode",
"292106/gcode/diglett__v3.gcode",
"292106/gcode/diglett__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/292106 | gcodes_0491.tar |
292075 | J1772 Plug Holder with Cord Management for EV chargers, | <p>We have a PHEV and wanted to have a place to keep the charger cord outside since the car is most often parked in the driveway. SCRAT82 had a great design but the screw centers were too close - we wanted the screws to line up with the mortar lines in the brick, so I stretched the design up and down.</p> | [] | Hobby & Makers > Automotive | [
"292075/images/20221010_102728-1.jpg"
] | [
"292075/gcode/J1772 Mount With Cord Managment__v0.gcode",
"292075/gcode/J1772 Mount With Cord Managment__v1.gcode",
"292075/gcode/J1772 Mount With Cord Managment__v2.gcode",
"292075/gcode/J1772 Mount With Cord Managment__v3.gcode",
"292075/gcode/J1772 Mount With Cord Managment__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/292075 | gcodes_0491.tar |
292037 | Hooks for lack table | <p>Hooks for the lack table to hold a small bag for scrap plastic parts, or other tools. They come off easily, and that is because my experience is, if you decrease the tolerance between the part and the table, over time the part will warp and will get even worse. I recommend a small piece of double-sided glue, or you ... | [
"tool",
"hook",
"lack",
"simple"
] | Hobby & Makers > Organizers | [
"292037/images/kepernyofoto-2022-10-09-182808.jpg",
"292037/images/img_0406.jpg"
] | [
"292037/gcode/lack v1__v0.gcode",
"292037/gcode/lack v1__v1.gcode",
"292037/gcode/lack v1__v2.gcode",
"292037/gcode/lack v1__v3.gcode",
"292037/gcode/lack v1__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/292037 | gcodes_0491.tar |
292010 | Catan Ore Harbor | <p>Ore harbor using “Valheim Tin Ore” by <a href="https://www.thingiverse.com/Flipcydeee">Flipcydeee</a> (https://www.thingiverse.com/thing:4773191).</p><p>Link to my design on Tinkercad. You might want to adjust the angle of the ore and move/resize the blocks</p><p>https://www.tinkercad.com/things/7Bq9SdWWsWP?sharecod... | [
"catan"
] | Toys & Games > Board Games | [
"292010/images/harbor-ore.jpg"
] | [
"292010/gcode/harbor top ore__v0.gcode",
"292010/gcode/harbor top ore__v1.gcode",
"292010/gcode/harbor top ore__v2.gcode",
"292010/gcode/harbor top ore__v3.gcode",
"292010/gcode/harbor top ore__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/292010 | gcodes_0491.tar |
291991 | heart | [] | Art & Design > Other Art & Designs | [
"291991/images/2022-10-09-170849_1400x1050_scrot.jpg"
] | [
"291991/gcode/srdce__v0.gcode",
"291991/gcode/srdce__v1.gcode",
"291991/gcode/srdce__v2.gcode",
"291991/gcode/srdce__v3.gcode",
"291991/gcode/srdce__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/291991 | gcodes_0491.tar | |
291894 | 8mm pipe end cap | <p>End cap for ∅8mm pipe or round bar.</p><p>Print standing without supports.</p> | [
"cap",
"plug",
"pipe",
"tube",
"endcap"
] | Hobby & Makers > Mechanical Parts | [
"291894/images/cep-za-cev.jpg"
] | [
"291894/gcode/end_cape_8mm__v0.gcode",
"291894/gcode/end_cape_8mm__v1.gcode",
"291894/gcode/end_cape_8mm__v2.gcode",
"291894/gcode/end_cape_8mm__v3.gcode",
"291894/gcode/end_cape_8mm__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/291894 | gcodes_0491.tar |
291799 | PrintABlok Owl | <p>I did resize the nice owl of Cushwa and gave it a PrintABlok connector.</p><p>Now it guards my PrintABlok Bird Feeder :-)</p><p>For PrintABlok see:</p><p>https://www.printables.com/model/47788-printablok-base-bloks</p><p> </p> | [
"owl",
"constructiontoys",
"buildingblocks",
"constructiontoy",
"printablok",
"constructionsets",
"buildingtoys",
"buildingbricks",
"buildingblock",
"buildingtoy"
] | Toys & Games > Building Toys | [
"291799/images/20221009_120715.jpg"
] | [
"291799/gcode/PrintABlokOwl__v0.gcode",
"291799/gcode/PrintABlokOwl__v1.gcode",
"291799/gcode/PrintABlokOwl__v2.gcode",
"291799/gcode/PrintABlokOwl__v3.gcode",
"291799/gcode/PrintABlokOwl__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/291799 | gcodes_0491.tar |
291712 | Bowler hat for figures | <p>Adjust the bowler hat to suit your needs using the scale.</p><p>Buřinku si pomocí měřítka upravte dle potřeby.</p><p>Material PLA.</p> | [
"rc",
"figure",
"hat",
"rccar",
"bowlerhat",
"bowler",
"figurka",
"klobouk",
"burinka",
"melone",
"melonehat"
] | Toys & Games > Action Figures & Statues | [
"291712/images/img_20220921_173055.jpg",
"291712/images/img_20220921_173203.jpg",
"291712/images/img_20220921_173116.jpg",
"291712/images/img_20220921_173125.jpg",
"291712/images/img_20220921_173108.jpg"
] | [
"291712/gcode/Buřinka__v0.gcode",
"291712/gcode/Buřinka__v1.gcode",
"291712/gcode/Buřinka__v2.gcode",
"291712/gcode/Buřinka__v3.gcode",
"291712/gcode/Buřinka__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/291712 | gcodes_0491.tar |
291685 | Earbud tips. | <p>Replacement tips for lost or worn out earbuds. I decided to try printing them from PLA and since they would not be flexible, I made them slightly smaller. This model has an outside diameter of 10.5mm. These were just comfortable for me while not falling out of my ears but you may need to increase the size. Also the ... | [
"music",
"headphones",
"gel",
"android",
"ipod",
"iphoneholder",
"ears",
"tips"
] | Gadgets > Audio | [
"291685/images/167c2913-db55-445a-995e-dee2dc085e3d.jpg",
"291685/images/67b26952-90b3-4f17-9abb-63bd67b4f65f.jpg"
] | [
"291685/gcode/Earbud tip__v0.gcode",
"291685/gcode/Earbud tip__v1.gcode",
"291685/gcode/Earbud tip__v2.gcode",
"291685/gcode/Earbud tip__v3.gcode",
"291685/gcode/Earbud tip__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/291685 | gcodes_0491.tar |
291568 | Gridfinity 2x3x12 Bin | [
"gridfinity"
] | Hobby & Makers > Organizers | [
"291568/images/fusion360_2022-10-08_22-46-49.jpg"
] | [
"291568/gcode/2x3x12 Bin__v0.gcode",
"291568/gcode/2x3x12 Bin__v1.gcode",
"291568/gcode/2x3x12 Bin__v2.gcode",
"291568/gcode/2x3x12 Bin__v3.gcode",
"291568/gcode/2x3x12 Bin__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/291568 | gcodes_0491.tar | |
291542 | Cute ghost - Fixed | <p>Fixed the cute ghost to be more easily printable as the bottom layer is now larger and more consistent.</p> | [
"halloween",
"ghost",
"cute",
"spooky"
] | Art & Design > Other Art & Designs | [
"291542/images/screenshot-2022-10-08-151423.jpg"
] | [
"291542/gcode/CuteGhost__v0.gcode",
"291542/gcode/CuteGhost__v1.gcode",
"291542/gcode/CuteGhost__v2.gcode",
"291542/gcode/CuteGhost__v3.gcode",
"291542/gcode/CuteGhost__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/291542 | gcodes_0491.tar |
291372 | Pegboard Caliper Holder for IGaging 4" caliper |
<p>This is a pegboard caliper holder for an Igaging 4" digital caliper. Will not fit dial calipers. Attaches to 1/4" pegboard using the push rivets I have uploaded to thingiverse.</p>
<p>Print using PLA, any infill desired, no supports should be necessary.</p>
Category: 3D Printing
| [
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"291372/images/c15bf19a087724f84277c299dd5a0c51_display_large_291372.jpg",
"291372/images/16057fabf480567dcd00ad75d526ffea_display_large_291372.jpg"
] | [
"291372/gcode/caliper_holder__v0.gcode",
"291372/gcode/caliper_holder__v1.gcode",
"291372/gcode/caliper_holder__v2.gcode",
"291372/gcode/caliper_holder__v3.gcode",
"291372/gcode/caliper_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/291372 | gcodes_0491.tar |
291371 | Pegboard Holder for Mitotoyo 6" dial caliper |
<p>This is a pegboard holder for a Mitotoyo 6" dial caliper. Attaches to 1/4" pegboard using the push rivets I uploaded to thingiverse.</p>
<p>Print using PLA, no supports should be needed.</p>
Category: 3D Printing
| [
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"291371/images/68b7f137737888df50d8534ab69ab70b_display_large_291371.jpg",
"291371/images/fdb547e02e270dc4f36ab2ddacc8b542_display_large_291371.jpg"
] | [
"291371/gcode/Mitotoyo_Holder__v0.gcode",
"291371/gcode/Mitotoyo_Holder__v1.gcode",
"291371/gcode/Mitotoyo_Holder__v2.gcode",
"291371/gcode/Mitotoyo_Holder__v3.gcode",
"291371/gcode/Mitotoyo_Holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/291371 | gcodes_0491.tar |
291346 | Lathe accessory mat. |
<p>This is a 5"x7" general purpose TPU mat for lathes and milling machines. I printed one and glued it to the top of my lathes electronics enclosure with RTV, as a place to lay tools, dyekem, end mills, etc. It has raised nubs to prevent items from rolling around.</p>
<h3>Print Settings</h3>
<p><strong>Rafts:</stron... | [
"thingiverse"
] | Hobby & Makers > Other Ideas | [
"291346/images/large_display_electronics_box_mat_291346.jpg"
] | [
"291346/gcode/Electronics_Box_Mat__v0.gcode",
"291346/gcode/Electronics_Box_Mat__v1.gcode",
"291346/gcode/Electronics_Box_Mat__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/291346 | gcodes_0491.tar |
291169 | Simple monitor headphones holder | [] | Household > Office | [
"291169/images/skarmbild-2022-10-09-230324.jpg"
] | [
"291169/gcode/monitor-headphones-holder__v0.gcode",
"291169/gcode/monitor-headphones-holder__v1.gcode",
"291169/gcode/monitor-headphones-holder__v2.gcode",
"291169/gcode/monitor-headphones-holder__v3.gcode",
"291169/gcode/monitor-headphones-holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/291169 | gcodes_0491.tar | |
291080 | Sun shield scope Axcel Rheotech bow | <p>Sun shield scope Axcel Rheotech bow</p><p>Print Settings <i><strong>:</strong></i></p><p>Resolution - <i>0.2mm </i></p><p>Filament material - Pla or Petg</p><p>Infill- ---</p><p>Size- <i>100%</i></p><p><br> </p> | [
"shield",
"bow",
"scope",
"archery",
"compound"
] | 3D Printers > Accessories | [
"291080/images/img_6123.jpg",
"291080/images/img_6124.jpg",
"291080/images/snimka-obrazovky-2022-10-08-o-115921.jpg"
] | [
"291080/gcode/sun shield scope bow__v0.gcode",
"291080/gcode/sun shield scope bow__v1.gcode",
"291080/gcode/sun shield scope bow__v2.gcode",
"291080/gcode/sun shield scope bow__v3.gcode",
"291080/gcode/sun shield scope bow__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/291080 | gcodes_0491.tar |
291077 | Zetor fuselage cover | <p>a cover for fusebox on your Zetor tractor.</p><p>if you print it with 0,2 nozzle the 540/min sign on top left will be there.</p><p>printed out of pla, I personally recomend print it with PetG for more durability</p> | [
"repair",
"tractor",
"fusebox",
"zetor"
] | Hobby & Makers > Automotive | [
"291077/images/zetor.jpg"
] | [
"291077/gcode/zetorfuselagecover__v0.gcode",
"291077/gcode/zetorfuselagecover__v1.gcode",
"291077/gcode/zetorfuselagecover__v2.gcode",
"291077/gcode/zetorfuselagecover__v3.gcode",
"291077/gcode/zetorfuselagecover__v4.gcode"
] | GNU General Public License v2.0 | https://www.printables.com/model/291077 | gcodes_0491.tar |
290984 | 2.2" TFT Desktop Stand Crypto / Stocks Ticker |
<p>Adapted to suit a 2.2" TFT</p>
<p>Hardware:</p>
<p>ILI9225 SPI Screen</p>
<p>Wemos Mini D1</p>
<p>Added Arduino sketch for the Crypto Ticker.</p>
<p>Updated to use yahoo finance symbols.</p>
Category: Electronics
| [
"cryptocurrency",
"bitcoin",
"thingiverse"
] | Hobby & Makers > Electronics | [
"290984/images/large_display_photo_290984.jpg",
"290984/images/624781954fd5845171f868fdb26d3af2_display_large_290984.jpg",
"290984/images/c937c0953a89f2179e412f9936ea2ebc_display_large_290984.jpg"
] | [
"290984/gcode/stand__v0.gcode",
"290984/gcode/stand__v1.gcode",
"290984/gcode/stand__v2.gcode",
"290984/gcode/stand__v3.gcode",
"290984/gcode/stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/290984 | gcodes_0491.tar |
290946 | Bolt vase | <p>This is a vase-mode vase with the form of a bolt. The wider base gives it good stability while the spiral threads add interest to the main part.</p> | [
"vase",
"bolt"
] | Household > Home Decor | [
"290946/images/bolt-vase.jpg"
] | [
"290946/gcode/Bolt vase__v0.gcode",
"290946/gcode/Bolt vase__v1.gcode",
"290946/gcode/Bolt vase__v2.gcode",
"290946/gcode/Bolt vase__v3.gcode",
"290946/gcode/Bolt vase__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/290946 | gcodes_0491.tar |
290862 | Lack Leg Support | <p>Printing with 25% infill and 3mm layer height.</p><p>Will require:</p><ul><li> 4 Wood Screws </li></ul> | [
"lack"
] | Household > Home Decor | [
"290862/images/2022-10-12-15_20_56-window.jpg",
"290862/images/2022-10-12-15_17_18-window.jpg",
"290862/images/pxl_20221012_220549380.jpg",
"290862/images/pxl_20221012_220604849.jpg"
] | [
"290862/gcode/IKEA Lack Leg Support__v0.gcode",
"290862/gcode/IKEA Lack Leg Support__v1.gcode",
"290862/gcode/IKEA Lack Leg Support__v2.gcode",
"290862/gcode/IKEA Lack Leg Support__v3.gcode",
"290862/gcode/IKEA Lack Leg Support__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/290862 | gcodes_0491.tar |
290706 | KIA 2020 Seatbelt clip | <p>Remixed because Kia must have slimmed down the width of their seatbelt clips. Something like TPU is a great, durable filament to leave in the car.</p><p>If you're better at modeling, feel free to take it away and make a way better one!</p><p>I use it for the times I have to sit in my car awhile and for some reason t... | [
"seatbelt",
"seatbeltclip"
] | Hobby & Makers > Automotive | [
"290706/images/screen-shot-2022-10-07-at-14715-pm.jpg"
] | [
"290706/gcode/Kia_2020_seat_buckle__v0.gcode",
"290706/gcode/Kia_2020_seat_buckle__v1.gcode",
"290706/gcode/Kia_2020_seat_buckle__v2.gcode",
"290706/gcode/Kia_2020_seat_buckle__v3.gcode",
"290706/gcode/Kia_2020_seat_buckle__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/290706 | gcodes_0491.tar |
290684 | Parametric fully assembled ball bearing | <h3>Ball Bearing</h3><ol><li>Parametric fully assembled ball bearing printed in-place.</li><li>Support generator in customizer.</li><li>Convenient debug mode in customizer.</li></ol><p>Just print and remove the support. Also can be printed without generated supports, but with artefacts.<br><br>Updated: fixed error with... | [
"parametric",
"calibration",
"printinplace",
"bearing",
"openscad",
"testprint",
"ballbearing",
"openscadlibrary",
"calibrationtest",
"openscadcustomizer"
] | 3D Printers > Test Models | [
"290684/images/photo_2022-10-08_01-32-27.jpg",
"290684/images/photo_2022-10-08_01-32-32.jpg",
"290684/images/photo_2022-10-07_23-07-27.jpg",
"290684/images/photo_2022-10-07_23-07-31.jpg",
"290684/images/photo_2022-10-07_23-07-29.jpg",
"290684/images/screenshot_20221007_223633.jpg",
"290684/images/screen... | [
"290684/gcode/bearing__v0.gcode",
"290684/gcode/bearing__v1.gcode",
"290684/gcode/bearing__v2.gcode",
"290684/gcode/bearing__v3.gcode",
"290684/gcode/bearing__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/290684 | gcodes_0491.tar |
290591 | Magnetische Schrauben Ablage / Magnetic Parts Tray |
<h3>Magnetische Schrauben Ablage</h3>
<p>Praktische magnetische Schraubenablage.</p>
<p>Maße: 122 x 85 x15 mm</p>
<p>Wird komplett ohne Support gedruckt.</p>
<p>Es werden 7 Magnete 10 x 3 mm benötigt, die von unten in die dafür vorgesehenen Vertiefungen geklebt werden.</p>
<p>Die Vertiefungen für die Magnete haben d... | [
"small",
"magnet",
"bowl",
"tray",
"magnetic",
"dish",
"thingiverse",
"schale",
"magneticholder",
"ablage",
"schrauben",
"magnetschale",
"skrew"
] | Hobby & Makers > Tools | [
"290591/images/large_display_20210812_065802_290591.jpg",
"290591/images/large_display_20210812_070118_290591.jpg",
"290591/images/large_display_20210812_065823_290591.jpg",
"290591/images/large_display_ablage-f360_290591.jpg",
"290591/images/large_display_schrauben-magnetablage_v2_290591.jpg"
] | [
"290591/gcode/Schrauben-Magnetablage_v2__v0.gcode",
"290591/gcode/Schrauben-Magnetablage_v2__v1.gcode",
"290591/gcode/Schrauben-Magnetablage_v2__v2.gcode",
"290591/gcode/Schrauben-Magnetablage_v2__v3.gcode",
"290591/gcode/Schrauben-Magnetablage_v2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/290591 | gcodes_0491.tar |
290582 | Wand Haken / Wall Hook | <h3>Stabiler Wandhaken</h3>
<p>Stabiler Wandhaken (ich benutze ihn für einen schweren Schärfestahl)</p>
<p>Die Wandplatte ist 55 x 35 mm groß und die Kugel hat 22mm Durchmesser</p>
<p>Ich habe ihn in PLA gedruckt.</p>
<p>Für noch mehr Stabilität kann man auch PETG oder ASA/ABS benutzen.</p>
<p>Infill je nach gewünschte... | [
"hook",
"haken",
"thingiverse",
"wallhook",
"wandhaken"
] | Household > Other House Equipment | [
"290582/images/large_display_5fa9b8b2-b798-44fd-8da1-9236e2f2cad1_290582.jpg",
"290582/images/large_display_bf8124ab-5d55-4ecc-8257-ad4875e016ce_290582.jpg",
"290582/images/large_display_841edfd8-66e8-4aa2-9147-844bcbf632b2_290582.jpg",
"290582/images/large_display_a40a06a4-30a7-43fa-8399-45cdff578e69_290582.... | [
"290582/gcode/Haken_v7__v0.gcode",
"290582/gcode/Haken_v7__v1.gcode",
"290582/gcode/Haken_v7__v2.gcode",
"290582/gcode/Haken_v7__v3.gcode",
"290582/gcode/Haken_v7__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/290582 | gcodes_0491.tar |
290439 | Top Holder for Pumpkin Lantern Stack | [
"halloween"
] | Household > Home Decor | [
"290439/images/pxl_20221007_184306527.jpg"
] | [
"290439/gcode/PumpkinTop__v0.gcode",
"290439/gcode/PumpkinTop__v1.gcode",
"290439/gcode/PumpkinTop__v2.gcode",
"290439/gcode/PumpkinTop__v3.gcode",
"290439/gcode/PumpkinTop__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/290439 | gcodes_0491.tar | |
290278 | FlyingBear Reborn 2 Filament Guide | <p>New version added, uses PTFE tube to avoid filament damage.</p><p> </p><p>I have placed spool inside my Reborn2. But there was a problem with filament tube, it slipping away and make problems for nozzle moving. this simple thing let me fix tube from slipping. All parts i took from FB Reborn 2 package.</p><h3>Pr... | [
"filamentguide",
"thingiverse",
"flyingbear",
"flyingbearreborn",
"fbreborn"
] | 3D Printers > Other Printer Parts & Upgrades | [
"290278/images/photo_2022-10-24_21-53-08.jpg",
"290278/images/large_display_a7385b03-7d4c-410c-af7f-bee9a6a79dc5_290278.jpg",
"290278/images/large_display_68b89998-2aab-4005-b8ee-9f090c59d7d7_290278.jpg",
"290278/images/photo_2022-10-24_21-53-08.jpg"
] | [
"290278/gcode/filamentguide-reborn2__v1.gcode",
"290278/gcode/filamentguide-reborn2__v2.gcode",
"290278/gcode/filamentguide-reborn2__v3.gcode",
"290278/gcode/filamentguide-reborn2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/290278 | gcodes_0491.tar |
290264 | Coin Vase | <p>A fast print for a Single Flower/Pen/Dollar Vase that can hold US coins on the outside. </p><p>Print in vase mode. A raft can be used for a stronger base if you are worried but it's not necessary. </p> | [
"coinholder"
] | Hobby & Makers > Organizers | [
"290264/images/20221006_202543.jpg",
"290264/images/20221006_2028241.jpg",
"290264/images/20221006_202559.jpg",
"290264/images/20221006_2030221.jpg"
] | [
"290264/gcode/Coin Vase__v0.gcode",
"290264/gcode/Coin Vase__v1.gcode",
"290264/gcode/Coin Vase__v2.gcode",
"290264/gcode/Coin Vase__v3.gcode",
"290264/gcode/Coin Vase__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/290264 | gcodes_0491.tar |
290246 | Challenge Coin Desk Display | <p>Simple challenge coin holder with 5 rows to display your challenge coins on your desk. </p><p>Can be remixed to put name in the front or logo ect.. Would recommend printing with a raft as it is a larger flat base and will want to curl.</p> | [
"coin",
"army",
"military",
"coinholder",
"challengecoin"
] | Household > Office | [
"290246/images/20221006_234301.jpg"
] | [
"290246/gcode/coinholder__v0.gcode",
"290246/gcode/coinholder__v1.gcode",
"290246/gcode/coinholder__v3.gcode",
"290246/gcode/coinholder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/290246 | gcodes_0491.tar |
290208 | Long Tailed Unicorn | <p>Unicorn with Long Tail </p><p>Blender Remix. </p> | [
"animals",
"tail",
"horse",
"unicorn",
"scultpure"
] | Art & Design > Sculptures | [
"290208/images/unicornsmooth.jpg"
] | [
"290208/gcode/thickunicorn__v1.gcode",
"290208/gcode/thickunicorn__v2.gcode",
"290208/gcode/thickunicorn__v3.gcode",
"290208/gcode/thickunicorn__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/290208 | gcodes_0492.tar |
290204 | Mason Jar Piggy Bank | <p>A simple insert for your mason jars to turn them into convenient piggy bank<br><br>It is for standard mouth mason jars, 68mm or 2.75". </p><p>I can quickly design one for wide mouth if requested</p> | [
"bank",
"piggybank",
"masonjar"
] | Household > Other House Equipment | [
"290204/images/pxl_20221007_030420078.jpg"
] | [
"290204/gcode/Mason_Jar_Bank__v0.gcode",
"290204/gcode/Mason_Jar_Bank__v1.gcode",
"290204/gcode/Mason_Jar_Bank__v2.gcode",
"290204/gcode/Mason_Jar_Bank__v3.gcode",
"290204/gcode/Mason_Jar_Bank__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/290204 | gcodes_0492.tar |
290192 | THE LEGOROCK | ARTICULATED | [] | Art & Design > Sculptures | [
"290192/images/screenshot-2022-10-06-202411.jpg"
] | [
"290192/gcode/The_LegoROCK__v0.gcode",
"290192/gcode/The_LegoROCK__v1.gcode",
"290192/gcode/The_LegoROCK__v2.gcode",
"290192/gcode/The_LegoROCK__v3.gcode",
"290192/gcode/The_LegoROCK__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/290192 | gcodes_0492.tar | |
290091 | Onion blossom cutter | <p>Print in PETG food safe. layer 0.2mm, infill 20%. Model is very similar as sold in aliexpress but this one can be print as your preferred size, in original size can hold a 10cm diameter onion.</p><p> </p> | [
"cutter",
"onion",
"blossom"
] | Household > Kitchen | [
"290091/images/cutter3.jpg",
"290091/images/cutter1.jpg",
"290091/images/cutter2.jpg",
"290091/images/61cg7e7mzgl_ac_sl1500.jpg"
] | [
"290091/gcode/onion blossom cutter__v0.gcode",
"290091/gcode/onion blossom cutter__v1.gcode",
"290091/gcode/onion blossom cutter__v2.gcode",
"290091/gcode/onion blossom cutter__v3.gcode",
"290091/gcode/onion blossom cutter__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/290091 | gcodes_0492.tar |
290073 | Twisted Vase | <p>Twisted face with “circular saw” pattern on top (or something alike). </p><p>I used 0.6mm nozzle and transparent PETG to print it (took 2h). <br>It's vase mode compatible, so make sure you set it correctly in your Slicer!</p> | [
"vase",
"vasemode",
"penholder",
"pencilholder",
"twistedvase",
"grail"
] | Household > Home Decor | [
"290073/images/untitled.jpg",
"290073/images/white-20221006_212859.jpg",
"290073/images/20221006_212854.jpg",
"290073/images/20221006_212904.jpg"
] | [
"290073/gcode/Vase__v0.gcode",
"290073/gcode/Vase__v1.gcode",
"290073/gcode/Vase__v2.gcode",
"290073/gcode/Vase__v3.gcode",
"290073/gcode/Vase__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/290073 | gcodes_0492.tar |
290058 | vase | [
"vase"
] | Art & Design > Sculptures | [
"290058/images/wazon-konkura.jpg"
] | [
"290058/gcode/konlkurs wazon.6stl__v0.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/290058 | gcodes_0492.tar | |
289961 | Modular holder for AA batteries. | <p>Sometimes you need just 1,5 Volt and sometimes 4,5 or even 9 Volt. This battery holder does it all!</p><p>For reasons of flexibility I used single, uniform battery clips (<a href="https://www.conrad.nl/nl/p/tru-components-308b-enkelvoudig-contact-1-a-aa-penlite-veercontact-1663954.html">https://www.conrad.nl/nl/p/tr... | [] | Hobby & Makers > Electronics | [
"289961/images/img_20221006_131438.jpg",
"289961/images/battery-holder-1-aa_2.jpg",
"289961/images/battery-holder-1-aa_1.jpg",
"289961/images/img_20221006_120147.jpg",
"289961/images/img_20221006_131418.jpg"
] | [
"289961/gcode/BatteryHolder 1AA_02-AA single__v0.gcode",
"289961/gcode/BatteryHolder 1AA_02-AA single__v1.gcode",
"289961/gcode/BatteryHolder 1AA_02-AA single__v2.gcode",
"289961/gcode/BatteryHolder 1AA_02-AA single__v3.gcode",
"289961/gcode/BatteryHolder 1AA_02-AA single__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/289961 | gcodes_0492.tar |
289921 | Macbook Magsafe Cover | <p>Simple Cover for the macbook magsafe plug. </p><p>For people who are anoyed of the charging light, or simple want to change the color of the plug.</p><p>compatible with Magsafe 2 (> 2012) Macbook Chargers</p> | [] | Gadgets > Computers | [
"289921/images/img_9206.jpg",
"289921/images/img_9208.jpg",
"289921/images/img_9207.jpg"
] | [
"289921/gcode/Magsafe_Cover__v0.gcode",
"289921/gcode/Magsafe_Cover__v1.gcode",
"289921/gcode/Magsafe_Cover__v2.gcode",
"289921/gcode/Magsafe_Cover__v3.gcode",
"289921/gcode/Magsafe_Cover__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/289921 | gcodes_0492.tar |
289882 | Articulating Arm Male to Female | <p>Remixed in tinkercad from <a href="https://www.thingiverse.com/thing:2448971">https://www.thingiverse.com/thing:2448971</a> to have a single part with male and female ends.</p><p>Category: Tool Holders & Boxes</p> | [
"thingiverse"
] | Hobby & Makers > Tools | [
"289882/images/fc09deb7256772c6dfc00c200f835ac4_display_large_289882.jpg"
] | [
"289882/gcode/Arm_m-f__v0.gcode",
"289882/gcode/Arm_m-f__v1.gcode",
"289882/gcode/Arm_m-f__v2.gcode",
"289882/gcode/Arm_m-f__v3.gcode",
"289882/gcode/Arm_m-f__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/289882 | gcodes_0492.tar |
289645 | gopro case | [] | Gadgets > Photo & Video | [
"289645/images/screenshot-2022-10-05-210520.jpg"
] | [
"289645/gcode/Gopro Case__v0.gcode",
"289645/gcode/Gopro Case__v1.gcode",
"289645/gcode/Gopro Case__v2.gcode",
"289645/gcode/Gopro Case__v3.gcode",
"289645/gcode/Gopro Case__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/289645 | gcodes_0492.tar | |
289359 | Banana Plug Saver | <p>Secures the plugs from touching while not plugged into a speaker. The holes are 4mm in diameter. No support needed.</p> | [] | Gadgets > Audio | [
"289359/images/pxl_20221005_142257624.jpg",
"289359/images/pxl_20221005_142621631.jpg"
] | [
"289359/gcode/Terminal Plug Saver__v0.gcode",
"289359/gcode/Terminal Plug Saver__v1.gcode",
"289359/gcode/Terminal Plug Saver__v2.gcode",
"289359/gcode/Terminal Plug Saver__v3.gcode",
"289359/gcode/Terminal Plug Saver__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/289359 | gcodes_0492.tar |
289347 | Compression Spring | <p>This is a quick spring model I put together in tinkercad.</p><p>I had success using 100% infill and tree supports, make the tree supports as thin as possible for easier removal(you can take pliers or anything and crush the tree supports from around the spring, and pull out easier.</p> | [
"spring",
"multiuse",
"boing"
] | Hobby & Makers > Other Ideas | [
"289347/images/pxl_20221006_133513008.jpg",
"289347/images/pxl_20221006_133522264.jpg"
] | [
"289347/gcode/Spring__v0.gcode",
"289347/gcode/Spring__v1.gcode",
"289347/gcode/Spring__v2.gcode",
"289347/gcode/Spring__v3.gcode",
"289347/gcode/Spring__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/289347 | gcodes_0492.tar |
289162 | Business Card Holder | [
"businesscards",
"business"
] | Household > Office | [
"289162/images/20221004_202754.jpg"
] | [
"289162/gcode/Business card holder__v0.gcode",
"289162/gcode/Business card holder__v1.gcode",
"289162/gcode/Business card holder__v2.gcode",
"289162/gcode/Business card holder__v3.gcode",
"289162/gcode/Business card holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/289162 | gcodes_0492.tar | |
289096 | Miniature Easel | <p>Several months ago, my wife received a Lego figure of Bob Ross, and she wanted an easel to go along with it. I designed and printed this one for her.</p><p>She painted a miniature version of Bob Ross's “Mountain Summit” on it.</p> | [
"miniature",
"bob",
"lego",
"easel",
"ross"
] | Art & Design > Other Art & Designs | [
"289096/images/resized_20221002_090355.jpg",
"289096/images/resized_20221004_120343.jpg",
"289096/images/20220920_174716.jpg"
] | [
"289096/gcode/Miniature Easel__v0.gcode",
"289096/gcode/Miniature Easel__v1.gcode",
"289096/gcode/Miniature Easel__v2.gcode",
"289096/gcode/Miniature Easel__v3.gcode",
"289096/gcode/Miniature Easel__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/289096 | gcodes_0492.tar |
289093 | Minecraft Pumpkin | <p>Use filament change for the green top.</p><p> </p><p>Scale it as you like.</p> | [
"pumpkin",
"minecraft",
"halloweenpumpkin",
"pumpkins"
] | Household > Outdoor & Garden | [
"289093/images/28230937-e806-451d-b212-a6c5f7db56e5.jpg",
"289093/images/72961a9a-a712-4163-84bf-b990e880a863.jpg",
"289093/images/f84ee422-fbd7-42d7-a944-95f642376ea4.jpg",
"289093/images/f5e24ac5-bc12-407f-a39e-b1325a5ae6bf.jpg",
"289093/images/captura-de-pantalla-2022-10-04-a-las-191301.jpg"
] | [
"289093/gcode/PumpkinMinecraft__v0.gcode",
"289093/gcode/PumpkinMinecraft__v1.gcode",
"289093/gcode/PumpkinMinecraft__v2.gcode",
"289093/gcode/PumpkinMinecraft__v3.gcode",
"289093/gcode/PumpkinMinecraft__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/289093 | gcodes_0492.tar |
288981 | Cold Pull Procedure | <p>As instructed in the official prusa guide for cold pull:<br><a href="https://help.prusa3d.com/article/cold-pull-mk3s-mk2-5s_2075">https://help.prusa3d.com/article/cold-pull-mk3s-mk2-5s_2075</a><br><br>This GCODE will simplify the process of going manually through every single menu to make this procedure. The only th... | [
"mk3s",
"pull",
"mk25s",
"cold",
"coldpull",
"procedure"
] | 3D Printers > Other Printer Parts & Upgrades | [
"288981/images/prusa1.jpg"
] | [
"288981/gcode/IGNORE THIS FILE__v0.gcode",
"288981/gcode/IGNORE THIS FILE__v1.gcode",
"288981/gcode/IGNORE THIS FILE__v2.gcode",
"288981/gcode/IGNORE THIS FILE__v3.gcode",
"288981/gcode/IGNORE THIS FILE__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/288981 | gcodes_0492.tar |
288901 | Shitbox Edition Car Badge |
<p>Shitbox Edition badge for that special vehicle.</p>
Category: Parts
| [
"badge",
"thingiverse",
"gambler",
"gambler500",
"shitbox"
] | Hobby & Makers > Other Ideas | [
"288901/images/large_display_shitbox_288901.jpg",
"288901/images/large_display_shitbox_edition_capture_288901.jpg"
] | [
"288901/gcode/shitbox__v0.gcode",
"288901/gcode/shitbox__v1.gcode",
"288901/gcode/shitbox__v2.gcode",
"288901/gcode/shitbox__v3.gcode",
"288901/gcode/shitbox__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/288901 | gcodes_0492.tar |
288873 | Protopasta Hex P logo mark charm great for keychains - use to test first (1st) layer & extents | [
"logo",
"protopasta",
"keychain",
"charm"
] | 3D Printers > Test Models | [
"288873/images/pxl_20221004_181804834.jpg",
"288873/images/pxl_20221004_185253839.jpg"
] | [
"288873/gcode/Protopasta hex P box size__v0.gcode",
"288873/gcode/Protopasta hex P box size__v1.gcode",
"288873/gcode/Protopasta hex P box size__v2.gcode",
"288873/gcode/Protopasta hex P box size__v3.gcode",
"288873/gcode/Protopasta hex P box size__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/288873 | gcodes_0492.tar | |
288866 | Line tamer | <h4>Description</h4><p>This is a small footprint cleat that, together with a small diameter cord (1 or 2 mm), can be used to stow your ropes, halyards and other lines. Specially useful in a boat.</p><p>It's the smaller version of a widely spread commercial product from Barton.</p><p>It screws into a wall with a 4 mm (d... | [
"storage",
"sailing",
"tidy",
"rope"
] | Sports & Outdoor > Outdoor Sports | [
"288866/images/img_20220925_180436.jpg"
] | [
"288866/gcode/Line tamer__v0.gcode",
"288866/gcode/Line tamer__v1.gcode",
"288866/gcode/Line tamer__v2.gcode",
"288866/gcode/Line tamer__v3.gcode",
"288866/gcode/Line tamer__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/288866 | gcodes_0492.tar |
288806 | Custom city model, Prague | <p>Hey, I wanted to share with you my youtube tutorial for printing EVERY CITY available in 3d on google maps. I think this technique brings a lot of creative opportunities. </p><figure class="media"><oembed url="https://www.youtube.com/watch?v=kzeJSy1z8W4&t=402s"></oembed></figure> | [
"3d",
"prague",
"castle",
"custom",
"google",
"city",
"blender",
"earth",
"charlesbridge"
] | Art & Design > Wall-mounted | [
"288806/images/snimek-obrazovky-2022-10-04-v-174533.jpg",
"288806/images/snimek-obrazovky-2022-10-02-v-215730.jpg"
] | [
"288806/gcode/PrahaRiver__v0.gcode",
"288806/gcode/PrahaRiver__v1.gcode",
"288806/gcode/PrahaRiver__v2.gcode",
"288806/gcode/PrahaRiver__v3.gcode",
"288806/gcode/PrahaRiver__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/288806 | gcodes_0492.tar |
288633 | Hook for IKEA Kura | [
"ikea",
"kura"
] | Household > Bedroom | [
"288633/images/img_2715.jpg"
] | [
"288633/gcode/kura-hook__v0.gcode",
"288633/gcode/kura-hook__v1.gcode",
"288633/gcode/kura-hook__v2.gcode",
"288633/gcode/kura-hook__v3.gcode",
"288633/gcode/kura-hook__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/288633 | gcodes_0492.tar | |
288393 | Sicherungsscheibe Innen DIN472 22*1 "Bohrungssicherungsring" früher "Segerring" | [
"bohrungssicherungsring",
"d22mm",
"din472",
"waelzlager608",
"segerring"
] | Hobby & Makers > Mechanical Parts | [
"288393/images/photo_2022-10-03_22-04-12.jpg",
"288393/images/din-472-22-x-1-1m1cent8cm0_23g.jpg"
] | [
"288393/gcode/DIN 472 - 22 x 1__v0.gcode",
"288393/gcode/DIN 472 - 22 x 1__v1.gcode",
"288393/gcode/DIN 472 - 22 x 1__v2.gcode",
"288393/gcode/DIN 472 - 22 x 1__v3.gcode",
"288393/gcode/DIN 472 - 22 x 1__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/288393 | gcodes_0492.tar | |
288387 | Simple fitness ring ~ size 8.5 US | <p>I have printed a few of these so far (wear and tear from work) I print them using Ninjaflex Chinchilla and they turn out great. </p> | [
"ring",
"jewelry",
"fitness"
] | Fashion > Men | [
"288387/images/one.jpg",
"288387/images/ring.jpg",
"288387/images/two.jpg",
"288387/images/three.jpg"
] | [
"288387/gcode/Ring 1__v0.gcode",
"288387/gcode/Ring 1__v1.gcode",
"288387/gcode/Ring 1__v2.gcode",
"288387/gcode/Ring 1__v3.gcode",
"288387/gcode/Ring 1__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/288387 | gcodes_0492.tar |
288352 | Friction Bearing Replacement for 608 ZZ Bearing | <p>Friction bearing replacement for a 608 ZZ ball bearing.</p> | [
"bearing",
"608",
"bearings",
"608bearing",
"608zz",
"608zzbearing",
"608bearings",
"frictionbearing"
] | Hobby & Makers > Mechanical Parts | [
"288352/images/1664823441741.jpg"
] | [
"288352/gcode/608 ZZ Friction Bearing__v0.gcode",
"288352/gcode/608 ZZ Friction Bearing__v1.gcode",
"288352/gcode/608 ZZ Friction Bearing__v2.gcode",
"288352/gcode/608 ZZ Friction Bearing__v3.gcode",
"288352/gcode/608 ZZ Friction Bearing__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/288352 | gcodes_0492.tar |
288328 | Ender 3 V2 Lightweight BLTouch mount | <p>scale to 1000% if it's too small.</p><p>Remix from this file: <a href="https://www.thingiverse.com/thing:5061678">https://www.thingiverse.com/thing:5061678</a></p><p>Offset X = -39, Y = -7, the same as the original version.</p> | [
"light",
"mount",
"ender",
"3",
"lightweight",
"bltouch",
"3v2"
] | 3D Printers > Creality Parts & Upgrades | [
"288328/images/img_20221003_185417.jpg",
"288328/images/img_20221003_184558.jpg"
] | [
"288328/gcode/UMesh_BL_Touch_mount_Ender_3_v2_v3__v0.gcode",
"288328/gcode/UMesh_BL_Touch_mount_Ender_3_v2_v3__v1.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/288328 | gcodes_0492.tar |
288296 | Protopasta cardboard spool side inner core insert for core rollers | <p>Print with spiral vase mode for a clean, continuous single wall.</p> | [
"spool",
"protopasta",
"spoolmount",
"spoolroller"
] | 3D Printers > Accessories | [
"288296/images/pxl_20221003_192347187.jpg",
"288296/images/pxl_20221003_190647109mp.jpg"
] | [
"288296/gcode/inner cylinder__v0.gcode",
"288296/gcode/inner cylinder__v1.gcode",
"288296/gcode/inner cylinder__v2.gcode",
"288296/gcode/inner cylinder__v3.gcode",
"288296/gcode/inner cylinder__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/288296 | gcodes_0492.tar |
288182 | Sleeping Dragon 2 (No supports needed) | <p>A curled up sleeping dragon. My friend and I have been doing test runs using this model - it prints well. It should print well as-is.</p> | [] | Toys & Games > Action Figures & Statues | [
"288182/images/untitled-133.jpg"
] | [
"288182/gcode/sleeping dragon2__v0.gcode",
"288182/gcode/sleeping dragon2__v1.gcode",
"288182/gcode/sleeping dragon2__v2.gcode",
"288182/gcode/sleeping dragon2__v3.gcode",
"288182/gcode/sleeping dragon2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/288182 | gcodes_0492.tar |
288107 | Gridfinity 5u wide wall mount bar | <p>So I wanted to attach a couple bins to the wall, inside my printer's enclosure. </p><p>I had previously printed ZackFreedman's 3D Printer mounted baseplate, and tough I could reuse it like this. came out perfect. </p><p> </p><p>allows to wall mount the Prusa baseplates from https://thangs.com/designer... | [
"wall",
"mount",
"wallmount",
"gridfinity",
"gridfinitybaseplate",
"gridfinitywallmount"
] | Hobby & Makers > Organizers | [
"288107/images/img_2618.jpg",
"288107/images/img_2619.jpg"
] | [
"288107/gcode/gridfinity holder v1__v1.gcode",
"288107/gcode/gridfinity holder v1__v2.gcode",
"288107/gcode/gridfinity holder v1__v3.gcode",
"288107/gcode/gridfinity holder v1__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/288107 | gcodes_0492.tar |
288060 | Cap for syringe / Kappe für Spritze | <p>Needed a cap to close a syringe with spare oil. Printed in PETG. Brauchte eine Kappe um eine Spritze mit Öl zu verschließen. Gedruckt mit PETG.</p> | [
"cap",
"syringe"
] | 3D Printers > Accessories | [
"288060/images/deckel_spritze.jpg"
] | [
"288060/gcode/Deckel_Spritze__v0.gcode",
"288060/gcode/Deckel_Spritze__v1.gcode",
"288060/gcode/Deckel_Spritze__v2.gcode",
"288060/gcode/Deckel_Spritze__v3.gcode",
"288060/gcode/Deckel_Spritze__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/288060 | gcodes_0492.tar |
288057 | Bottle cage support | [
"bike",
"bottleholder"
] | Sports & Outdoor > Outdoor Sports | [
"288057/images/muntatge_porta_bidons3web.jpg"
] | [
"288057/gcode/pastilla PORTA BIDONS__v0.gcode",
"288057/gcode/pastilla PORTA BIDONS__v1.gcode",
"288057/gcode/pastilla PORTA BIDONS__v2.gcode",
"288057/gcode/pastilla PORTA BIDONS__v3.gcode",
"288057/gcode/pastilla PORTA BIDONS__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/288057 | gcodes_0492.tar | |
288054 | Molle-Tag for Compass (Kompass) | <p>Made a molle-tag that holds a 20mm compass. It is a complete redesign that is based on the idea and dimensions of the mentioned remix-from.</p> | [
"molle",
"compass",
"kompass"
] | Sports & Outdoor > Outdoor Sports | [
"288054/images/molle_kompass.jpg",
"288054/images/img_6817.jpg"
] | [
"288054/gcode/Molle_Kompass__v0.gcode",
"288054/gcode/Molle_Kompass__v1.gcode",
"288054/gcode/Molle_Kompass__v2.gcode",
"288054/gcode/Molle_Kompass__v3.gcode",
"288054/gcode/Molle_Kompass__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/288054 | gcodes_0492.tar |
287976 | Bambu Labs 250g Spool Roller | <p>This adapter will allow for 250g spools to be used directly in the AMS unit without having to take adapters on and off of spools.</p><p>The only materials needed are two (2) 608 bearings, these can also be printed though if you choose.</p><p>If you need something changed, or have any recommendations please drop a co... | [
"thingiverse",
"bambulab",
"bambulabx1carbon"
] | 3D Printers > Accessories | [
"287976/images/large_display_b7862968-a48c-4e44-a02f-d53fe2ff9e9d_287976.jpg",
"287976/images/large_display_936ad0ca-6b92-4193-b517-ae394bbbd0a5_287976.jpg",
"287976/images/large_display_20dca8fd-6b15-41f0-80ad-ae23ecb84447_287976.jpg",
"287976/images/large_display_a8d278de-7ce1-4ef3-9429-4bc4492a2a1a_287976.... | [
"287976/gcode/Bambu X1C 250g Roller v4__v0.gcode",
"287976/gcode/Bambu X1C 250g Roller v4__v1.gcode",
"287976/gcode/Bambu X1C 250g Roller v4__v2.gcode",
"287976/gcode/Bambu X1C 250g Roller v4__v3.gcode",
"287976/gcode/Bambu X1C 250g Roller v4__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/287976 | gcodes_0492.tar |
287947 | Gridfinity 2x2x6 bin | [
"grid",
"gridfinity",
"finity",
"2x2x6"
] | Hobby & Makers > Organizers | [
"287947/images/img_2616.jpg"
] | [
"287947/gcode/Simple bin 2x2__v0.gcode",
"287947/gcode/Simple bin 2x2__v1.gcode",
"287947/gcode/Simple bin 2x2__v2.gcode",
"287947/gcode/Simple bin 2x2__v3.gcode",
"287947/gcode/Simple bin 2x2__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/287947 | gcodes_0492.tar | |
287889 | Quadlock Popsocket Adapter | [
"adapter",
"popsocket",
"quadlock"
] | Gadgets > Portable Devices | [
"287889/images/image_2022-10-02_212308795.jpg"
] | [
"287889/gcode/betterpopquad__v0.gcode",
"287889/gcode/betterpopquad__v1.gcode",
"287889/gcode/betterpopquad__v2.gcode",
"287889/gcode/betterpopquad__v3.gcode",
"287889/gcode/betterpopquad__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/287889 | gcodes_0492.tar | |
287798 | Small Round Table | <p>Not much to say, It's been a running inside joke, and just had to model it up.</p> | [] | Costumes & Accessories > Props | [
"287798/images/img_0430.jpg"
] | [
"287798/gcode/BARNA_asztal__v2.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/287798 | gcodes_0492.tar |
287742 | Bag Carrier | [
"bag",
"handle",
"carrier"
] | Household > Kitchen | [
"287742/images/f671bb18-d8d3-4fe2-8d12-0877eeb5aae9.jpg"
] | [
"287742/gcode/bag_carrier_Large__v0.gcode",
"287742/gcode/bag_carrier_Large__v1.gcode",
"287742/gcode/bag_carrier_Large__v2.gcode",
"287742/gcode/bag_carrier_Large__v3.gcode",
"287742/gcode/bag_carrier_Large__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/287742 | gcodes_0492.tar | |
287741 | Doble Jigger | [
"drinks"
] | Hobby & Makers > Other Ideas | [
"287741/images/1eb92183-8542-421f-a2c3-4d690d490ba2.jpg"
] | [
"287741/gcode/Jigger_1.0_0.50_Rev2.0__v0.gcode",
"287741/gcode/Jigger_1.0_0.50_Rev2.0__v1.gcode",
"287741/gcode/Jigger_1.0_0.50_Rev2.0__v2.gcode",
"287741/gcode/Jigger_1.0_0.50_Rev2.0__v3.gcode",
"287741/gcode/Jigger_1.0_0.50_Rev2.0__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/287741 | gcodes_0492.tar | |
287636 | 4 note whistling arrowhead | <p>print in pla+ these have 4 separate whisltes that produce 4 notes and make an eerie sound. feel free to experiment with the pitch of each whislte by editing the file or fillin the chamnbers with different levels of glue or clay. video below</p><p> </p><p><a href="https://www.reddit.com/r/3Dprinting/comments/tkd... | [
"whistle",
"bow",
"archery",
"projectile",
"crossbow",
"trainwhistle",
"arrowhead",
"bowandarrow",
"dopplereffect"
] | Sports & Outdoor > Outdoor Sports | [
"287636/images/screenshot_20221002-134710.jpg"
] | [
"287636/gcode/fixed_quad_whistle__v0.gcode",
"287636/gcode/fixed_quad_whistle__v1.gcode",
"287636/gcode/fixed_quad_whistle__v2.gcode",
"287636/gcode/fixed_quad_whistle__v3.gcode",
"287636/gcode/fixed_quad_whistle__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/287636 | gcodes_0492.tar |
287635 | support charge samsung gear s3 | [
"samsung",
"connecter",
"montre"
] | Gadgets > Other Gadgets | [
"287635/images/img_20221002_192325.jpg",
"287635/images/img_20221002_192301.jpg"
] | [
"287635/gcode/support charge samsung gear s3 v8__v0.gcode",
"287635/gcode/support charge samsung gear s3 v8__v1.gcode",
"287635/gcode/support charge samsung gear s3 v8__v2.gcode",
"287635/gcode/support charge samsung gear s3 v8__v3.gcode",
"287635/gcode/support charge samsung gear s3 v8__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/287635 | gcodes_0492.tar | |
287609 | Vtech baby cam mount | <p>Wanted a mount that didn't use screws in the wall and where i could take the camera down if I needed it somewhere else in the house.</p> | [
"babymonitor",
"vtech"
] | Household > Bedroom | [
"287609/images/2022-10-02-124109.jpg",
"287609/images/2022-10-02-124114.jpg",
"287609/images/2022-10-02-124310.jpg"
] | [
"287609/gcode/Vtech mount__v0.gcode",
"287609/gcode/Vtech mount__v1.gcode",
"287609/gcode/Vtech mount__v2.gcode",
"287609/gcode/Vtech mount__v3.gcode",
"287609/gcode/Vtech mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/287609 | gcodes_0492.tar |
287429 | Bathroom radiator hook for 22.5 mm diam | <p>Bathroom radiator hook for towels and the radiator has 22.5 mm diam horizontal elements. </p> | [] | Household > Bathroom | [
"287429/images/16647079041556000218498914228163.jpg"
] | [
"287429/gcode/Bathroom radiator hook__v0.gcode",
"287429/gcode/Bathroom radiator hook__v1.gcode",
"287429/gcode/Bathroom radiator hook__v2.gcode",
"287429/gcode/Bathroom radiator hook__v3.gcode",
"287429/gcode/Bathroom radiator hook__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/287429 | gcodes_0492.tar |
287257 | Siri Remote (2nd generation) stand for Apple TV | <p>Remixed from a Thingiverse model, for the first generation Siri Remote, by Johnny Mast.</p><p>Made the depth larger to fit the new remote but chose to leave the flat shape to allow remote to fit either direction.</p><p> </p><p>https://www.thingiverse.com/johnnymast</p> | [
"appletv",
"appletvremote",
"siriremote"
] | Household > Other House Equipment | [
"287257/images/ae3f914f-c38f-48b1-b6fb-9f7da27a7ff9.jpg",
"287257/images/6528c055-e0fe-486a-8769-faf04a1f2dfc.jpg"
] | [
"287257/gcode/siri remote g2 stand__v0.gcode",
"287257/gcode/siri remote g2 stand__v1.gcode",
"287257/gcode/siri remote g2 stand__v2.gcode",
"287257/gcode/siri remote g2 stand__v3.gcode",
"287257/gcode/siri remote g2 stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/287257 | gcodes_0492.tar |
287059 | Wave Vase | <p>First model. Designed for vase mode.</p><p>Works well as a pencil cup.</p> | [
"vase",
"decoration",
"holder",
"design",
"vasemode",
"flowervase",
"pencilcup",
"homedecor",
"spiralizedvasemode"
] | Household > Home Decor | [
"287059/images/img_5655.jpg",
"287059/images/img_5657.jpg"
] | [
"287059/gcode/WaveVase(v4)__v0.gcode",
"287059/gcode/WaveVase(v4)__v1.gcode",
"287059/gcode/WaveVase(v4)__v2.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/287059 | gcodes_0492.tar |
286914 | Filament spool hanger | [
"holder",
"hook",
"hanger",
"filament",
"filamentspoolholder",
"filamentholder"
] | 3D Printers > Accessories | [
"286914/images/index.jpg",
"286914/images/index2.jpg"
] | [
"286914/gcode/spool support__v0.gcode",
"286914/gcode/spool support__v1.gcode",
"286914/gcode/spool support__v2.gcode",
"286914/gcode/spool support__v3.gcode",
"286914/gcode/spool support__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/286914 | gcodes_0492.tar | |
286836 | 150mm - 100mm Flex hose adapter | <p>Coupler to join 100mm flex hose to 150mm flex hose. Print at 3 layer lines at least and pick material to suit conditions. </p><p>I use to vent my printer chamber. </p> | [
"adapter",
"flex",
"hose",
"couple"
] | Household > Other House Equipment | [
"286836/images/screenshot-2022-10-01-201731.jpg"
] | [
"286836/gcode/150-100 adapter v3__v0.gcode",
"286836/gcode/150-100 adapter v3__v1.gcode",
"286836/gcode/150-100 adapter v3__v2.gcode",
"286836/gcode/150-100 adapter v3__v3.gcode",
"286836/gcode/150-100 adapter v3__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/286836 | gcodes_0492.tar |
286825 | M5 Bontrager/Trek thumb screw | <p>Simple alternative for the extremely expensive (and imho bad) frame screws from Bontrager to attach frame bags to the bikes (e.g. Trek Checkpoint) → <a href="https://www.trekbikes.com/gb/en_GB/equipment/bike-accessories/bike-bags-panniers/bontrager-thumb-screw/p/37387/">https://www.trekbikes.com/gb/en_GB/equipment/b... | [
"trek",
"screw",
"bontrager",
"checkpoint"
] | Sports & Outdoor > Outdoor Sports | [
"286825/images/img_20221004_142718.jpg",
"286825/images/img_20221004_131510.jpg",
"286825/images/img_20221004_131522.jpg",
"286825/images/img_20221004_131457.jpg"
] | [
"286825/gcode/M5_screw_Trek_checkpoint v1__v0.gcode",
"286825/gcode/M5_screw_Trek_checkpoint v1__v1.gcode",
"286825/gcode/M5_screw_Trek_checkpoint v1__v2.gcode",
"286825/gcode/M5_screw_Trek_checkpoint v1__v3.gcode",
"286825/gcode/M5_screw_Trek_checkpoint v1__v4.gcode"
] | GNU General Public License v2.0 | https://www.printables.com/model/286825 | gcodes_0492.tar |
286816 | IKEA FREDDE cover | [
"ikea",
"cover",
"fredde"
] | Household > Office | [
"286816/images/img_7907.jpg",
"286816/images/img_7908.jpg"
] | [
"286816/gcode/IKEA FREDDE Cover__v0.gcode",
"286816/gcode/IKEA FREDDE Cover__v1.gcode",
"286816/gcode/IKEA FREDDE Cover__v2.gcode",
"286816/gcode/IKEA FREDDE Cover__v3.gcode",
"286816/gcode/IKEA FREDDE Cover__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/286816 | gcodes_0492.tar | |
286695 | Cyberpunk 2077 Logo / Lettering | <p>Cyberpunk 2077 Logo / Lettering</p><p>Printed with 0.4mm nozzle at 0.3mm layer higth with Bavaria Filament PLA Black Matte and Yellow.</p><p>Made a manual filament change between layer 3 and 4 (of 6).</p><p> </p> | [
"cyberpunk2077",
"cyberpunk"
] | Art & Design > 2D Plates & Logos | [
"286695/images/1664610879029.jpg",
"286695/images/1664610879008.jpg",
"286695/images/1664610879023.jpg"
] | [
"286695/gcode/CP2077 Logo__v1.gcode",
"286695/gcode/CP2077 Logo__v3.gcode",
"286695/gcode/CP2077 Logo__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/286695 | gcodes_0492.tar |
286639 | Pumpkin Bookmark | <p>This is a simple .07mm thick book mark. The pumpkin head is slightly thicker and below has a ridge so it doesn't fully slide into the book. <br><br>I printed mine in PETG and it has a nice flex to it, but I'm sure any filament will work for this. I printed mine at .20, so anything lower you'll get mu... | [
"halloween",
"pumpkin",
"mark",
"book",
"bookmark",
"october",
"spooky",
"boo",
"bookmarks",
"seasonal"
] | Seasonal designs > Autumn & Halloween | [
"286639/images/img_7076.jpg",
"286639/images/img_7074.jpg"
] | [
"286639/gcode/Pumpkin_Bookmark_07mm__v0.gcode",
"286639/gcode/Pumpkin_Bookmark_07mm__v1.gcode",
"286639/gcode/Pumpkin_Bookmark_07mm__v2.gcode",
"286639/gcode/Pumpkin_Bookmark_07mm__v3.gcode",
"286639/gcode/Pumpkin_Bookmark_07mm__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/286639 | gcodes_0492.tar |
286494 | Bahtinov Skywatcher 150/750 | <p>Using the same dimensions as the standard Skywatcher dustcap.<br>The .stl is completely manifold and thus perfectly printable.</p><p>tested settings with PETG:</p><ul><li>layer height: 0.3mm</li><li>2 perimeter shells</li><li>infill: 20%</li><li>no supports needed</li></ul> | [
"newtonian",
"newtoniantelescope",
"bahtinov",
"skywatcher"
] | Learning > Physics & Astronomy | [
"286494/images/untitled.jpg"
] | [
"286494/gcode/Bahtinov_150-750_v3__v0.gcode",
"286494/gcode/Bahtinov_150-750_v3__v1.gcode",
"286494/gcode/Bahtinov_150-750_v3__v2.gcode",
"286494/gcode/Bahtinov_150-750_v3__v3.gcode",
"286494/gcode/Bahtinov_150-750_v3__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/286494 | gcodes_0492.tar |
286476 | Adapterplate Voron Stealthburner for Clockwork2 Anycubic Viper | <p>Remixed Adapterplate to use Voron Stealthburner and direct drive Clockwork2 on Anycubic Viper. </p><p>I made some small changes to fit the clockwork 2 on the adapter plate by fragmon. Just normally print it and it should fit perfectly.</p><p>I had to cut the upper part of the metal plate, since the motor for th... | [
"3d",
"3dprinter",
"anycubic",
"voron",
"anycubicvyper",
"voronstealthburner",
"clockwork2"
] | 3D Printers > Anycubic Parts & Upgrades | [
"286476/images/tempimagedhyflu.jpg",
"286476/images/tempimageg4k8ca.jpg",
"286476/images/tempimagee9l7fd.jpg"
] | [
"286476/gcode/Adapterplate_Voron_Stealthburner_Clockwork2__v0.gcode",
"286476/gcode/Adapterplate_Voron_Stealthburner_Clockwork2__v1.gcode",
"286476/gcode/Adapterplate_Voron_Stealthburner_Clockwork2__v2.gcode",
"286476/gcode/Adapterplate_Voron_Stealthburner_Clockwork2__v3.gcode",
"286476/gcode/Adapterplate_V... | Creative Commons — Public Domain | https://www.printables.com/model/286476 | gcodes_0492.tar |
286473 | Tisch ordungssystem | <p>Material: PLA+</p><p>Layerhöhe 0,2-0,4 mm</p> | [
"stiftehalter"
] | Hobby & Makers > Organizers | [
"286473/images/1664569605544.jpg"
] | [
"286473/gcode/Desk Organizer V2__v0.gcode",
"286473/gcode/Desk Organizer V2__v1.gcode",
"286473/gcode/Desk Organizer V2__v2.gcode",
"286473/gcode/Desk Organizer V2__v3.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/286473 | gcodes_0492.tar |
286434 | Spacemouse Cover | <p>Made a cover for my Spacemouse. Included the .stp file if you want to change it for your own needs.</p><p> </p><p>Printed in PLA</p> | [] | Household > Office | [
"286434/images/pxl_20220930_190047746.jpg",
"286434/images/pxl_20220930_190041277.jpg",
"286434/images/pxl_20220930_190016757.jpg"
] | [
"286434/gcode/Spacemouse_Cover__v0.gcode",
"286434/gcode/Spacemouse_Cover__v1.gcode",
"286434/gcode/Spacemouse_Cover__v2.gcode",
"286434/gcode/Spacemouse_Cover__v3.gcode",
"286434/gcode/Spacemouse_Cover__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/286434 | gcodes_0492.tar |
286420 | 1x2 Schrauben Boxen für Werkbank Küpper Werkbank Schrauben Ordnungssystem Aufbewahrung Sortierung | <p>Modulares Ordungssystem für schrauben und Kleinteile in Werkbänken und Werkstätten.</p><p>Mit laschen zum herausnehmen und beschriften.</p><p>Material: PLA+</p><p>Läyerhöhe 0,2-0,4 mm</p><p>Wanstärke 1,5 mm (sehr Stabil)</p><p> </p><p>Modular organization system for screws and small parts in workbenches and wor... | [
"werkzeughalter",
"werkzeugwand",
"werkstatt",
"schrauben",
"ordnung",
"ordnungsbox",
"ordnungssystem",
"werkbank",
"schraubensortiment",
"ordnungshelfer",
"schraubenkiste"
] | Hobby & Makers > Organizers | [
"286420/images/img_20220930_202255.jpg",
"286420/images/img_20220930_202357.jpg",
"286420/images/img_20220930_202321.jpg"
] | [
"286420/gcode/Einsatz 1x2 V2__v0.gcode",
"286420/gcode/Einsatz 1x2 V2__v1.gcode",
"286420/gcode/Einsatz 1x2 V2__v2.gcode",
"286420/gcode/Einsatz 1x2 V2__v3.gcode",
"286420/gcode/Einsatz 1x2 V2__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/286420 | gcodes_0492.tar |
286372 | Mazzer Super Jolly Bellows Adapter | <p>This adapts the silicone bottle/bellows from the “OXO Good Grips 8-Piece Baker's Silicone Decorating Bottle Kit” to fit the Mazzer Super Jolly for enhanced cleaning in a single-dose setup. </p><p>Bellows dia: 53 mm, SJ dia: 60 mm</p><p>Prints with no supports top-side down, 0.2 mm</p><p>STEP and f3d files inclu... | [
"mazzer",
"mazzergrinder",
"mazzersuperjolly",
"superjolly"
] | Household > Kitchen | [
"286372/images/screenshot-2022-09-30-095719.jpg"
] | [
"286372/gcode/SJ Bellows Adapter__v0.gcode",
"286372/gcode/SJ Bellows Adapter__v1.gcode",
"286372/gcode/SJ Bellows Adapter__v2.gcode",
"286372/gcode/SJ Bellows Adapter__v3.gcode",
"286372/gcode/SJ Bellows Adapter__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/286372 | gcodes_0492.tar |
286366 | Blind milking plug | <p>I printed in PLA</p> | [
"milk"
] | Hobby & Makers > Tools | [
"286366/images/bez-naslova.jpg",
"286366/images/viber_slika_2022-09-11_14-53-47-937.jpg"
] | [
"286366/gcode/milk block__v0.gcode",
"286366/gcode/milk block__v1.gcode",
"286366/gcode/milk block__v2.gcode",
"286366/gcode/milk block__v3.gcode",
"286366/gcode/milk block__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/286366 | gcodes_0492.tar |
286357 | BTT Manta M8P Board mount | <p>I needed a board mount for the Manta M8P.<br>Thank you @Byte Insight for the Step Files</p> | [] | 3D Printers > Other Printer Parts & Upgrades | [
"286357/images/20220928_181219.jpg"
] | [
"286357/gcode/Board_Base_Manta8 v2__v0.gcode",
"286357/gcode/Board_Base_Manta8 v2__v1.gcode",
"286357/gcode/Board_Base_Manta8 v2__v2.gcode",
"286357/gcode/Board_Base_Manta8 v2__v3.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/286357 | gcodes_0492.tar |
286307 | Czech Republic - cookie cutter | <p>Model of CzechRepublic cookie cutter</p><p>The model generated by <a href="https://app.cookiecad.com/?settings=%7B"purchaseSize"%3A3,"cutterSize"%3A75,"sizeType"%3A"longest","interiorType"%3A"outline","imprintDepth"%3A4.5,"bladeDepth"%3A... | [
"borderlands",
"czechrepublic",
"cookiescutter",
"christmascookiecutters"
] | Household > Kitchen | [
"286307/images/cz-cookie-cutter2.jpg",
"286307/images/cz-cookie-cutter1.jpg"
] | [
"286307/gcode/Cz-cookie-cutter__v0.gcode",
"286307/gcode/Cz-cookie-cutter__v1.gcode",
"286307/gcode/Cz-cookie-cutter__v2.gcode",
"286307/gcode/Cz-cookie-cutter__v3.gcode",
"286307/gcode/Cz-cookie-cutter__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/286307 | gcodes_0492.tar |
286270 | Deli Bag Holder | [
"holder",
"bag"
] | Hobby & Makers > Other Ideas | [
"286270/images/img_0772.jpg"
] | [
"286270/gcode/Deli Bag Holder v4__v0.gcode",
"286270/gcode/Deli Bag Holder v4__v1.gcode",
"286270/gcode/Deli Bag Holder v4__v2.gcode",
"286270/gcode/Deli Bag Holder v4__v3.gcode",
"286270/gcode/Deli Bag Holder v4__v4.gcode"
] | GNU Lesser General Public License | https://www.printables.com/model/286270 | gcodes_0493.tar | |
286209 | Spool holder | [
"filament",
"spoolholder",
"2040"
] | 3D Printers > Accessories | [
"286209/images/holder.jpg"
] | [
"286209/gcode/Part1__v0.gcode",
"286209/gcode/Part1__v1.gcode",
"286209/gcode/Part1__v2.gcode",
"286209/gcode/Part1__v3.gcode",
"286209/gcode/Part1__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/286209 | gcodes_0493.tar | |
286098 | Seam and overhang/cooling test. | <p>Quick model to help adjust seam settings and Overhang torture test when printed without supports to help tune and optimise cooling/speed settings for overhangs. </p><p>(pics are a quick print using standard pla profile, no support, 0.6mm nozzle, 0.2mm layer height.)</p><p> I haven't yet started tuning my s... | [
"speed",
"cooling",
"overhang",
"seam"
] | 3D Printers > Test Models | [
"286098/images/whatsapp-image-2022-09-30-at-080916-3.jpg",
"286098/images/whatsapp-image-2022-09-30-at-080916-1.jpg",
"286098/images/whatsapp-image-2022-09-30-at-080916-2.jpg",
"286098/images/whatsapp-image-2022-09-30-at-080916.jpg"
] | [
"286098/gcode/test__v0.gcode",
"286098/gcode/test__v1.gcode",
"286098/gcode/test__v2.gcode",
"286098/gcode/test__v3.gcode",
"286098/gcode/test__v4.gcode"
] | GNU General Public License v2.0 | https://www.printables.com/model/286098 | gcodes_0493.tar |
286030 | JBL CLIP 4 Stand / hook | <p>The JBL Clip 4 is nice, but the hook can suck sometimes and the speaker doesn't sit flat. </p><p>This little stand helps let the speaker stand in a few positions and it can fit/store over the JBL hook. </p><p> </p> | [
"jblclip",
"jblclip4",
"clip4holder"
] | Gadgets > Portable Devices | [
"286030/images/img_7190.jpg",
"286030/images/img_7193.jpg",
"286030/images/img_7191.jpg",
"286030/images/img_7192.jpg",
"286030/images/img_7194.jpg",
"286030/images/img_7195.jpg"
] | [
"286030/gcode/JBL CLIP 4 STAND__v0.gcode",
"286030/gcode/JBL CLIP 4 STAND__v1.gcode",
"286030/gcode/JBL CLIP 4 STAND__v2.gcode",
"286030/gcode/JBL CLIP 4 STAND__v3.gcode",
"286030/gcode/JBL CLIP 4 STAND__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/286030 | gcodes_0493.tar |
285962 | Trombone BERP (Large Bore) | <p>Designed this for my friend's trombone, so it may not snap on for yours. For a large bore mouthpiece.</p>
<h3>Print Settings</h3>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-setting supports"><strong>Supports: </strong>
<div><p>Yes</p></div>
<p><strong>Resolution:</strong></p>
<p>0.2</p>
<p class="deta... | [
"thingiverse",
"trombone"
] | Hobby & Makers > Music | [
"285962/images/screenshot-2022-09-30-000255.jpg"
] | [
"285962/gcode/BERP_ring__v0.gcode",
"285962/gcode/BERP_ring__v1.gcode",
"285962/gcode/BERP_ring__v2.gcode",
"285962/gcode/BERP_ring__v3.gcode",
"285962/gcode/BERP_ring__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/285962 | gcodes_0493.tar |
285919 | Vacuum adapter from 60mm dust port to 35mm vacuum hose | <p>I wanted a way of connecting my jointer/thicknesser (Femi PF250) 60mm dust port to my 35mm shop vac hose (parkside).</p><p>This did the trick. Possibly many other jointers and table saws have 60mm dust ports.</p> | [
"vacuum",
"parkside",
"vacuumadapter",
"thicknessplaner"
] | Hobby & Makers > Mechanical Parts | [
"285919/images/vacuum_hose_adapter_57_36.jpg",
"285919/images/img_2760.jpg"
] | [
"285919/gcode/vacuum_hose_adapter_57_36__v0.gcode",
"285919/gcode/vacuum_hose_adapter_57_36__v1.gcode",
"285919/gcode/vacuum_hose_adapter_57_36__v2.gcode",
"285919/gcode/vacuum_hose_adapter_57_36__v3.gcode",
"285919/gcode/vacuum_hose_adapter_57_36__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/285919 | gcodes_0493.tar |
285912 | Broken Column Flower Pot |
<p>Tiny Broken Column Pot - I suppose you can make it as big as you want, mine only fits a very small Air Plant</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Ender 3</p></div>
<p><strong>Rafts:</strong></p>
<p>D... | [
"thingiverse"
] | Household > Home Decor | [
"285912/images/large_display_86aadc1e-3029-4889-85c2-e351ab4640b7_285912.jpg",
"285912/images/large_display_e70488c2-374f-4d69-8c9f-4b7769ccf077_285912.jpg"
] | [
"285912/gcode/column-pot__v0.gcode",
"285912/gcode/column-pot__v1.gcode",
"285912/gcode/column-pot__v2.gcode",
"285912/gcode/column-pot__v3.gcode",
"285912/gcode/column-pot__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/285912 | gcodes_0493.tar |
285896 | Jeff Bezos Death Whistle |
<p>A functioning Jeff Bezos Death Whistle ala the Aztecs/Maya.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Ender 3 Pro</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-setting supports"><str... | [
"whistle",
"screaming",
"funny",
"amazon",
"thingiverse",
"jeff",
"bezos",
"deathwhistle",
"jeffbezos"
] | Art & Design > Other Art & Designs | [
"285896/images/large_display_98b1c6fe-f0fb-4d1f-a8ba-2e31c0aa00c3_285896.jpg"
] | [
"285896/gcode/bezos_death_whistle_v3__v0.gcode",
"285896/gcode/bezos_death_whistle_v3__v1.gcode",
"285896/gcode/bezos_death_whistle_v3__v2.gcode",
"285896/gcode/bezos_death_whistle_v3__v3.gcode",
"285896/gcode/bezos_death_whistle_v3__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/285896 | gcodes_0493.tar |
285887 | Tears Of The Kingdom/ BOTW 2 ( rings) | <p>Last pieces for the cosplay for tears of the kingdom</p><p> </p> | [] | Costumes & Accessories > Cosplay & Costumes in general | [
"285887/images/rings.jpg"
] | [
"285887/gcode/rings (1)__v0.gcode",
"285887/gcode/rings (1)__v1.gcode",
"285887/gcode/rings (1)__v2.gcode",
"285887/gcode/rings (1)__v3.gcode",
"285887/gcode/rings (1)__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/285887 | gcodes_0493.tar |
285777 | Keychain, Puerto Rico, Coqui, Taino, with flag | [
"keychain",
"treefrog",
"puertorican",
"taino"
] | Fashion > Other Fashion Accessories | [
"285777/images/coqui-taino-w-flag-design.jpg"
] | [
"285777/gcode/coqui-taino-w-flag__v0.gcode",
"285777/gcode/coqui-taino-w-flag__v1.gcode",
"285777/gcode/coqui-taino-w-flag__v2.gcode",
"285777/gcode/coqui-taino-w-flag__v3.gcode",
"285777/gcode/coqui-taino-w-flag__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/285777 | gcodes_0493.tar | |
285773 | Lakeland Dry:Soon Heated Airer Tier Clip | <p>I had to make this as Lakeland don't offer replacements for this part that always breaks. Hopefully of use to someone, somewhere!</p><p>I printed in PLA first time around, but it soon melted and warped (those racks get pretty hot!) so next used PET-G and worked perfectly.</p><p>You'll need some build plate supports ... | [
"clip",
"rack",
"clothes"
] | Household > Other House Equipment | [
"285773/images/clips.jpg"
] | [
"285773/gcode/Clothes Drier Clip v1__v0.gcode",
"285773/gcode/Clothes Drier Clip v1__v1.gcode",
"285773/gcode/Clothes Drier Clip v1__v2.gcode",
"285773/gcode/Clothes Drier Clip v1__v3.gcode",
"285773/gcode/Clothes Drier Clip v1__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/285773 | gcodes_0493.tar |
285769 | Ender 3 Gridfinity top mount | <p>Print standing up long way and just slide on ;)</p> | [
"mount",
"ender",
"ender3",
"gridfinity"
] | 3D Printers > Accessories | [
"285769/images/20220929_125634.jpg",
"285769/images/20220929_114341.jpg"
] | [
"285769/gcode/ender 3 top mount v2__v0.gcode",
"285769/gcode/ender 3 top mount v2__v1.gcode",
"285769/gcode/ender 3 top mount v2__v2.gcode",
"285769/gcode/ender 3 top mount v2__v3.gcode",
"285769/gcode/ender 3 top mount v2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/285769 | gcodes_0493.tar |
285753 | 4-inch Hydroponic Net Pot | <p>This net pot fits the female end of a 4" PVC fitting and print without support.</p> | [
"hydroponics",
"thingiverse",
"diyhydroponics"
] | Household > Outdoor & Garden | [
"285753/images/c213660487bbdbe592a3bd36703c4ab4_display_large_285753.jpg",
"285753/images/874cf903567785bc976c5e2b09af6ec8_display_large_285753.jpg"
] | [
"285753/gcode/Net_Pot_4-inches_mod__v0.gcode",
"285753/gcode/Net_Pot_4-inches_mod__v1.gcode",
"285753/gcode/Net_Pot_4-inches_mod__v2.gcode",
"285753/gcode/Net_Pot_4-inches_mod__v3.gcode",
"285753/gcode/Net_Pot_4-inches_mod__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/285753 | gcodes_0493.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.