model_id stringlengths 1 7 | name stringlengths 1 169 | description stringlengths 0 38.2k | tags listlengths 0 284 | printables_category stringclasses 76
values | image_paths listlengths 0 62 | gcode_paths listlengths 1 10 | license stringclasses 8
values | source stringlengths 34 40 | shard_file stringclasses 742
values |
|---|---|---|---|---|---|---|---|---|---|
35018 | Microscope Stand Upgrade | <p>An upgraded stand for this popular and inexpensive USB microscope (Jiusion 1000x and similar).</p>
<p>The clamp that comes in in the kit it's way too flexible, making it really hard to focus. This upgrade uses a simple trick to hold the microscope steadier: the clamp itself gets tightened by the same screw mechanism... | [
"camera",
"stand",
"bracket",
"clamp",
"macro",
"endoscope",
"thingiverse",
"microscope",
"zoom",
"magnification",
"jiusion"
] | Hobby & Makers > Electronics | [
"35018/images/f7c472bd094bfd2f5498c11a586da785_display_large_35.jpg",
"35018/images/4341d42443cbed87ee0a1e9f85d8c34f_display_large_35.jpg",
"35018/images/d92debd768234dcdbb1b077844122e4b_display_large_35.jpg",
"35018/images/2b1b8ad7bbab2f43f5b4ac8fab9b5d60_display_large_35.jpg"
] | [
"35018/gcode/microscope__v0.gcode",
"35018/gcode/microscope__v1.gcode",
"35018/gcode/microscope__v2.gcode",
"35018/gcode/microscope__v3.gcode",
"35018/gcode/microscope__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35018 | gcodes_0559.tar |
33457 | Logitec C270 articulated arm to Ender 3 adapter | <p>This adapter connects an articulated arm, which holds a C270 webcam, to the frame of an Ender 3 Pro with the help of two T-nuts and two M3x10 screws.</p>
<p>Just print this adapter, and mount it to the left rail of your Ender 3 with two of these T-nuts:<br/>
<a href="https://www.thingiverse.com/thing:3050607">https:... | [
"logitechc270",
"ender3",
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"33457/images/large_display_complete_camera_arm_on_ender_33457.jpg",
"33457/images/large_display_camera_arm_adapter_mounted_on_ender.jpg",
"33457/images/large_display_adapter_with_t-nuts_33457.jpg",
"33457/images/large_display_articulated_arm_to_ender_3_adapter_.jpg"
] | [
"33457/gcode/articulated_arm_to_ender_3_adapter__v0.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v1.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v2.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v3.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33457 | gcodes_0559.tar |
33451 | Prusa i3 Mk3S extruder indicator | <p>This little extruder indicator was inspired by others with a similar design. They did not fully meet my needs, so I made my own.</p>
<p>My design specification included:</p>
<ul>
<li>indication needs to be unique over a 360° range, i.e. no repetitive pattern (which is really helpful if you watch via a camera live st... | [
"extruder",
"thingiverse"
] | 3D Printers > Prusa Parts & Upgrades | [
"33451/images/large_display_extruder_indicator_photo_33451.jpg",
"33451/images/large_display_bildschirmfoto_vom_2020-02-28_21-45.jpg",
"33451/images/large_display_extruder_indicator_33451.jpg"
] | [
"33451/gcode/extruder_indicator__v0.gcode",
"33451/gcode/extruder_indicator__v1.gcode",
"33451/gcode/extruder_indicator__v2.gcode",
"33451/gcode/extruder_indicator__v3.gcode",
"33451/gcode/extruder_indicator__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33451 | gcodes_0559.tar |
33405 | Arduino MKR series simple stand | <p>The new arduino form factor has long thin pins that are protected by a conductive foam inside of the box. This is a simple stand that covers and protect those pins.</p>
<h3>Print instructions</h3><h3>Category: Electronics Summary</h3>
<p>The new arduino form factor has long thin pins that are protected by a conducti... | [
"stand",
"arduino",
"arduinocase",
"thingiverse",
"mkr",
"mkr1000",
"mkr1500"
] | Hobby & Makers > Electronics | [
"33405/images/df0ef6aa88bdca77df722214f493878c_display_large_33.jpg",
"33405/images/cb18ac913b4e0d3942ed453208b3df1b_display_large_33.jpg",
"33405/images/32c567325611430dfcb6927542620324_display_large_33.jpg",
"33405/images/624781954fd5845171f868fdb26d3af2_display_large_33.jpg"
] | [
"33405/gcode/stand__v0.gcode",
"33405/gcode/stand__v1.gcode",
"33405/gcode/stand__v2.gcode",
"33405/gcode/stand__v3.gcode",
"33405/gcode/stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33405 | gcodes_0559.tar |
35113 | Coin Holder for Swiss franc (CHF) | <p>Coin Holder for Swiss franc (CHF) to keep my change sorted. I've added 0.5mm tolerance to the coin diameter. Coins can't fall out at the front.</p>
<h3>Print instructions</h3><p>Filament: PETG<br/>
Color: Galaxy Black<br/>
Temps: 235°C / 85°C (first layer and the rest)<br/>
Layer height: 0.2mm (first layer and the r... | [
"holder",
"coin",
"stand"
] | Hobby & Makers > Organizers | [
"35113/images/img_20200622_083038.jpg",
"35113/images/img_20200621_230024.jpg"
] | [
"35113/gcode/coin_holder__v0.gcode",
"35113/gcode/coin_holder__v1.gcode",
"35113/gcode/coin_holder__v2.gcode",
"35113/gcode/coin_holder__v3.gcode",
"35113/gcode/coin_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35113 | gcodes_0559.tar |
35426 | TP-Link POE Wall Mount | <p>This wall mount is meant for the TP-Link TL-POE150S Injector, used for powering on a device with Power Over Ethernet while not having a compatible network plug available.</p>
<p>For testing purpose I printed this on a layer height of .3mm, however the result will be much better when printed with .10mm or .20mm layer... | [
"wall",
"mount",
"wallmount",
"thingiverse"
] | Household > Other House Equipment | [
"35426/images/large_display_img_1560_35426.jpg",
"35426/images/large_display_img_1557_35426.jpg",
"35426/images/large_display_img_1558_35426.jpg",
"35426/images/large_display_img_1555_35426.jpg",
"35426/images/large_display_img_1543_35426.jpg",
"35426/images/large_display_img_1544_35426.jpg",
"35426/ima... | [
"35426/gcode/tplink_poe_wall_mount__v0.gcode",
"35426/gcode/tplink_poe_wall_mount__v1.gcode",
"35426/gcode/tplink_poe_wall_mount__v2.gcode",
"35426/gcode/tplink_poe_wall_mount__v3.gcode",
"35426/gcode/tplink_poe_wall_mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35426 | gcodes_0559.tar |
35496 | Inch cap for cubic tank | <p>this cap reduce tank thread to 1inch pipe thread for valve</p>
<h3>Print instructions</h3><p>If you want to print the cap without our website, you can just put the .stl into the slicer, but when you print it with our website, you must split it in mmu mode...</p> | [] | Household > Outdoor & Garden | [
"35496/images/98a8f59f-c3ea-4164-b2cc-a442b003c0f6.jpg",
"35496/images/cap.jpg"
] | [
"35496/gcode/cap__v0.gcode",
"35496/gcode/cap__v1.gcode",
"35496/gcode/cap__v2.gcode",
"35496/gcode/cap__v3.gcode",
"35496/gcode/cap__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/35496 | gcodes_0559.tar |
35375 | Apple Pencil Charging Dock | <p>I dislike clutter on my desk, so I made an Apple Pencil charging dock that attaches to the side of my monitor with 3M command strips [Large, see link below].</p>
<p>The dock sticks to a wall or any other surface and provides an organized way to store and charge the Apple Pencil, the cap, and the adapter. Your cap si... | [
"stand",
"wallmount",
"dock",
"charging",
"apple",
"monitor",
"chargingdock",
"wallmounted",
"thingiverse",
"chargingstation",
"chargingstand",
"monitormount",
"3mcommandstrips",
"3mcommand",
"applepencil",
"applepencilcap",
"applepencilholder",
"applepencilstand"
] | Gadgets > Other Gadgets | [
"35375/images/5edcb6c95ab8af61f0c69a4cbae3d8ca_display_large_3.jpg",
"35375/images/6eac5ff89da0d670091a15d33aca8348_display_large_3.jpg",
"35375/images/capture_35375.jpg",
"35375/images/9b116b77cb2adafe3906d90aef468c65_display_large_35.jpg",
"35375/images/f6a37c342c95a01b1d715a4be6d35f96_display_large_35.jp... | [
"35375/gcode/pencil_dock__v0.gcode",
"35375/gcode/pencil_dock__v1.gcode",
"35375/gcode/pencil_dock__v2.gcode",
"35375/gcode/pencil_dock__v3.gcode",
"35375/gcode/pencil_dock__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35375 | gcodes_0559.tar |
35354 | Zero Motorcycles Zero S Swingarm Frame Tube Cap | <p>This is a Frame Tube Cap the Zero Motorcycles Zero S Motorcycle.<br/>
You can use it to store things in the swingarm frame tube.<br/>
I printed it in TPU and stored my warning west in the tube. :)</p>
<p>It is a very snug fit with my Prusa MK3S, so maybe first print only one and see how it fits on your bike.</p>
<... | [
"thingiverse"
] | Hobby & Makers > Automotive | [
"35354/images/large_display_swingarm_frame_tube_cap_35354.jpg",
"35354/images/large_display_20-05-12_16-48-42_8436_35354.jpg"
] | [
"35354/gcode/swingarm_frame_tube_cap__v0.gcode",
"35354/gcode/swingarm_frame_tube_cap__v1.gcode",
"35354/gcode/swingarm_frame_tube_cap__v2.gcode",
"35354/gcode/swingarm_frame_tube_cap__v3.gcode",
"35354/gcode/swingarm_frame_tube_cap__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35354 | gcodes_0559.tar |
35176 | VESA Adapter for 30 inch Apple Cinema HD Display | <p>An adapter plate for the Apple Cinema Display (30 inch).</p>
<p>This is so you can use one of these old chunky monitors on a more useful stand!</p>
<p>You'll need to remove the stand that comes with the monitor, and save those two fancy looking screws on the side. You'll also need four M4 nuts to use in the screw ho... | [
"display",
"bracket",
"apple",
"adapter",
"screen",
"thingiverse",
"macintosh",
"vesa",
"cinema"
] | Gadgets > Computers | [
"35176/images/large_display_vesa_adapter_v2_35176.jpg"
] | [
"35176/gcode/vesa_adapter_v2__v0.gcode",
"35176/gcode/vesa_adapter_v2__v1.gcode",
"35176/gcode/vesa_adapter_v2__v2.gcode",
"35176/gcode/vesa_adapter_v2__v3.gcode",
"35176/gcode/vesa_adapter_v2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35176 | gcodes_0559.tar |
35160 | Corner-Mounted Shaver Holder | <p>Designed to mount in a corner with two 3M Command strips, this holder should fit a typical electric shaver. IT may fit yours, it may not, but print it (or measure it) and find out!</p>
<h3>Print instructions</h3><h3>Category: Bathroom Summary</h3>
<p>Designed to mount in a corner with two 3M Command strips, this hol... | [
"holder",
"corner",
"thingiverse",
"3mcommandstrips",
"electricshaver"
] | Household > Bathroom | [
"35160/images/9dedff064a025c3c28d3f014d9db52cd_display_large_35.jpg",
"35160/images/95b958f80879e389e2330b9de7093ac4_display_large_35.jpg"
] | [
"35160/gcode/shaver_holder__v0.gcode",
"35160/gcode/shaver_holder__v1.gcode",
"35160/gcode/shaver_holder__v2.gcode",
"35160/gcode/shaver_holder__v3.gcode",
"35160/gcode/shaver_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35160 | gcodes_0559.tar |
35138 | FTM-400 desktop stand | <p>Yaesu FTM-400 desktop stand</p>
<h3>Print instructions</h3><p>Unassociated tags: ftm 400, ham radio</p>
<h3>Category: Electronics Summary</h3>
<p>Yaesu FTM-400 desktop stand</p> | [
"thingiverse",
"yaesu",
"amateurfunk"
] | Hobby & Makers > Electronics | [
"35138/images/6486e463eae24f5472b3bfd2dc7b413e_display_large_35.jpg"
] | [
"35138/gcode/ftm400_stand__v0.gcode",
"35138/gcode/ftm400_stand__v1.gcode",
"35138/gcode/ftm400_stand__v2.gcode",
"35138/gcode/ftm400_stand__v3.gcode",
"35138/gcode/ftm400_stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35138 | gcodes_0559.tar |
35265 | Prusa Sized Artichoke Lamp Shade | <p>I like the design, but since my Prusa i3 MK2 has a max build height of 20cm I had to re-scale it a little. Since making it smaller would have also made the hole for the light socket too small that had to change too.</p>
<h3>Print instructions</h3><h3>Category: Decor Summary</h3>
<p>I like the design, but since my Pr... | [
"lampshade",
"thingiverse"
] | Household > Home Decor | [
"35265/images/e34e5341ada4ee0fc466068fb026b9d9_display_large_35.jpg"
] | [
"35265/gcode/artichokelampshade__v0.gcode",
"35265/gcode/artichokelampshade__v1.gcode",
"35265/gcode/artichokelampshade__v2.gcode",
"35265/gcode/artichokelampshade__v3.gcode",
"35265/gcode/artichokelampshade__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35265 | gcodes_0559.tar |
35018 | Microscope Stand Upgrade | <p>An upgraded stand for this popular and inexpensive USB microscope (Jiusion 1000x and similar).</p>
<p>The clamp that comes in in the kit it's way too flexible, making it really hard to focus. This upgrade uses a simple trick to hold the microscope steadier: the clamp itself gets tightened by the same screw mechanism... | [
"camera",
"stand",
"bracket",
"clamp",
"macro",
"endoscope",
"thingiverse",
"microscope",
"zoom",
"magnification",
"jiusion"
] | Hobby & Makers > Electronics | [
"35018/images/f7c472bd094bfd2f5498c11a586da785_display_large_35.jpg",
"35018/images/4341d42443cbed87ee0a1e9f85d8c34f_display_large_35.jpg",
"35018/images/d92debd768234dcdbb1b077844122e4b_display_large_35.jpg",
"35018/images/2b1b8ad7bbab2f43f5b4ac8fab9b5d60_display_large_35.jpg"
] | [
"35018/gcode/microscope__v0.gcode",
"35018/gcode/microscope__v1.gcode",
"35018/gcode/microscope__v2.gcode",
"35018/gcode/microscope__v3.gcode",
"35018/gcode/microscope__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35018 | gcodes_0559.tar |
33457 | Logitec C270 articulated arm to Ender 3 adapter | <p>This adapter connects an articulated arm, which holds a C270 webcam, to the frame of an Ender 3 Pro with the help of two T-nuts and two M3x10 screws.</p>
<p>Just print this adapter, and mount it to the left rail of your Ender 3 with two of these T-nuts:<br/>
<a href="https://www.thingiverse.com/thing:3050607">https:... | [
"logitechc270",
"ender3",
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"33457/images/large_display_complete_camera_arm_on_ender_33457.jpg",
"33457/images/large_display_camera_arm_adapter_mounted_on_ender.jpg",
"33457/images/large_display_adapter_with_t-nuts_33457.jpg",
"33457/images/large_display_articulated_arm_to_ender_3_adapter_.jpg"
] | [
"33457/gcode/articulated_arm_to_ender_3_adapter__v0.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v1.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v2.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v3.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33457 | gcodes_0559.tar |
33451 | Prusa i3 Mk3S extruder indicator | <p>This little extruder indicator was inspired by others with a similar design. They did not fully meet my needs, so I made my own.</p>
<p>My design specification included:</p>
<ul>
<li>indication needs to be unique over a 360° range, i.e. no repetitive pattern (which is really helpful if you watch via a camera live st... | [
"extruder",
"thingiverse"
] | 3D Printers > Prusa Parts & Upgrades | [
"33451/images/large_display_extruder_indicator_photo_33451.jpg",
"33451/images/large_display_bildschirmfoto_vom_2020-02-28_21-45.jpg",
"33451/images/large_display_extruder_indicator_33451.jpg"
] | [
"33451/gcode/extruder_indicator__v0.gcode",
"33451/gcode/extruder_indicator__v1.gcode",
"33451/gcode/extruder_indicator__v2.gcode",
"33451/gcode/extruder_indicator__v3.gcode",
"33451/gcode/extruder_indicator__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33451 | gcodes_0559.tar |
33405 | Arduino MKR series simple stand | <p>The new arduino form factor has long thin pins that are protected by a conductive foam inside of the box. This is a simple stand that covers and protect those pins.</p>
<h3>Print instructions</h3><h3>Category: Electronics Summary</h3>
<p>The new arduino form factor has long thin pins that are protected by a conducti... | [
"stand",
"arduino",
"arduinocase",
"thingiverse",
"mkr",
"mkr1000",
"mkr1500"
] | Hobby & Makers > Electronics | [
"33405/images/df0ef6aa88bdca77df722214f493878c_display_large_33.jpg",
"33405/images/cb18ac913b4e0d3942ed453208b3df1b_display_large_33.jpg",
"33405/images/32c567325611430dfcb6927542620324_display_large_33.jpg",
"33405/images/624781954fd5845171f868fdb26d3af2_display_large_33.jpg"
] | [
"33405/gcode/stand__v0.gcode",
"33405/gcode/stand__v1.gcode",
"33405/gcode/stand__v2.gcode",
"33405/gcode/stand__v3.gcode",
"33405/gcode/stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33405 | gcodes_0559.tar |
35113 | Coin Holder for Swiss franc (CHF) | <p>Coin Holder for Swiss franc (CHF) to keep my change sorted. I've added 0.5mm tolerance to the coin diameter. Coins can't fall out at the front.</p>
<h3>Print instructions</h3><p>Filament: PETG<br/>
Color: Galaxy Black<br/>
Temps: 235°C / 85°C (first layer and the rest)<br/>
Layer height: 0.2mm (first layer and the r... | [
"holder",
"coin",
"stand"
] | Hobby & Makers > Organizers | [
"35113/images/img_20200622_083038.jpg",
"35113/images/img_20200621_230024.jpg"
] | [
"35113/gcode/coin_holder__v0.gcode",
"35113/gcode/coin_holder__v1.gcode",
"35113/gcode/coin_holder__v2.gcode",
"35113/gcode/coin_holder__v3.gcode",
"35113/gcode/coin_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35113 | gcodes_0559.tar |
35426 | TP-Link POE Wall Mount | <p>This wall mount is meant for the TP-Link TL-POE150S Injector, used for powering on a device with Power Over Ethernet while not having a compatible network plug available.</p>
<p>For testing purpose I printed this on a layer height of .3mm, however the result will be much better when printed with .10mm or .20mm layer... | [
"wall",
"mount",
"wallmount",
"thingiverse"
] | Household > Other House Equipment | [
"35426/images/large_display_img_1560_35426.jpg",
"35426/images/large_display_img_1557_35426.jpg",
"35426/images/large_display_img_1558_35426.jpg",
"35426/images/large_display_img_1555_35426.jpg",
"35426/images/large_display_img_1543_35426.jpg",
"35426/images/large_display_img_1544_35426.jpg",
"35426/ima... | [
"35426/gcode/tplink_poe_wall_mount__v0.gcode",
"35426/gcode/tplink_poe_wall_mount__v1.gcode",
"35426/gcode/tplink_poe_wall_mount__v2.gcode",
"35426/gcode/tplink_poe_wall_mount__v3.gcode",
"35426/gcode/tplink_poe_wall_mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35426 | gcodes_0559.tar |
35375 | Apple Pencil Charging Dock | <p>I dislike clutter on my desk, so I made an Apple Pencil charging dock that attaches to the side of my monitor with 3M command strips [Large, see link below].</p>
<p>The dock sticks to a wall or any other surface and provides an organized way to store and charge the Apple Pencil, the cap, and the adapter. Your cap si... | [
"stand",
"wallmount",
"dock",
"charging",
"apple",
"monitor",
"chargingdock",
"wallmounted",
"thingiverse",
"chargingstation",
"chargingstand",
"monitormount",
"3mcommandstrips",
"3mcommand",
"applepencil",
"applepencilcap",
"applepencilholder",
"applepencilstand"
] | Gadgets > Other Gadgets | [
"35375/images/5edcb6c95ab8af61f0c69a4cbae3d8ca_display_large_3.jpg",
"35375/images/6eac5ff89da0d670091a15d33aca8348_display_large_3.jpg",
"35375/images/capture_35375.jpg",
"35375/images/9b116b77cb2adafe3906d90aef468c65_display_large_35.jpg",
"35375/images/f6a37c342c95a01b1d715a4be6d35f96_display_large_35.jp... | [
"35375/gcode/pencil_dock__v0.gcode",
"35375/gcode/pencil_dock__v1.gcode",
"35375/gcode/pencil_dock__v2.gcode",
"35375/gcode/pencil_dock__v3.gcode",
"35375/gcode/pencil_dock__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35375 | gcodes_0559.tar |
35354 | Zero Motorcycles Zero S Swingarm Frame Tube Cap | <p>This is a Frame Tube Cap the Zero Motorcycles Zero S Motorcycle.<br/>
You can use it to store things in the swingarm frame tube.<br/>
I printed it in TPU and stored my warning west in the tube. :)</p>
<p>It is a very snug fit with my Prusa MK3S, so maybe first print only one and see how it fits on your bike.</p>
<... | [
"thingiverse"
] | Hobby & Makers > Automotive | [
"35354/images/large_display_swingarm_frame_tube_cap_35354.jpg",
"35354/images/large_display_20-05-12_16-48-42_8436_35354.jpg"
] | [
"35354/gcode/swingarm_frame_tube_cap__v0.gcode",
"35354/gcode/swingarm_frame_tube_cap__v1.gcode",
"35354/gcode/swingarm_frame_tube_cap__v2.gcode",
"35354/gcode/swingarm_frame_tube_cap__v3.gcode",
"35354/gcode/swingarm_frame_tube_cap__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35354 | gcodes_0559.tar |
35496 | Inch cap for cubic tank | <p>this cap reduce tank thread to 1inch pipe thread for valve</p>
<h3>Print instructions</h3><p>If you want to print the cap without our website, you can just put the .stl into the slicer, but when you print it with our website, you must split it in mmu mode...</p> | [] | Household > Outdoor & Garden | [
"35496/images/98a8f59f-c3ea-4164-b2cc-a442b003c0f6.jpg",
"35496/images/cap.jpg"
] | [
"35496/gcode/cap__v0.gcode",
"35496/gcode/cap__v1.gcode",
"35496/gcode/cap__v2.gcode",
"35496/gcode/cap__v3.gcode",
"35496/gcode/cap__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/35496 | gcodes_0559.tar |
35176 | VESA Adapter for 30 inch Apple Cinema HD Display | <p>An adapter plate for the Apple Cinema Display (30 inch).</p>
<p>This is so you can use one of these old chunky monitors on a more useful stand!</p>
<p>You'll need to remove the stand that comes with the monitor, and save those two fancy looking screws on the side. You'll also need four M4 nuts to use in the screw ho... | [
"display",
"bracket",
"apple",
"adapter",
"screen",
"thingiverse",
"macintosh",
"vesa",
"cinema"
] | Gadgets > Computers | [
"35176/images/large_display_vesa_adapter_v2_35176.jpg"
] | [
"35176/gcode/vesa_adapter_v2__v0.gcode",
"35176/gcode/vesa_adapter_v2__v1.gcode",
"35176/gcode/vesa_adapter_v2__v2.gcode",
"35176/gcode/vesa_adapter_v2__v3.gcode",
"35176/gcode/vesa_adapter_v2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35176 | gcodes_0559.tar |
35160 | Corner-Mounted Shaver Holder | <p>Designed to mount in a corner with two 3M Command strips, this holder should fit a typical electric shaver. IT may fit yours, it may not, but print it (or measure it) and find out!</p>
<h3>Print instructions</h3><h3>Category: Bathroom Summary</h3>
<p>Designed to mount in a corner with two 3M Command strips, this hol... | [
"holder",
"corner",
"thingiverse",
"3mcommandstrips",
"electricshaver"
] | Household > Bathroom | [
"35160/images/9dedff064a025c3c28d3f014d9db52cd_display_large_35.jpg",
"35160/images/95b958f80879e389e2330b9de7093ac4_display_large_35.jpg"
] | [
"35160/gcode/shaver_holder__v0.gcode",
"35160/gcode/shaver_holder__v1.gcode",
"35160/gcode/shaver_holder__v2.gcode",
"35160/gcode/shaver_holder__v3.gcode",
"35160/gcode/shaver_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35160 | gcodes_0559.tar |
35138 | FTM-400 desktop stand | <p>Yaesu FTM-400 desktop stand</p>
<h3>Print instructions</h3><p>Unassociated tags: ftm 400, ham radio</p>
<h3>Category: Electronics Summary</h3>
<p>Yaesu FTM-400 desktop stand</p> | [
"thingiverse",
"yaesu",
"amateurfunk"
] | Hobby & Makers > Electronics | [
"35138/images/6486e463eae24f5472b3bfd2dc7b413e_display_large_35.jpg"
] | [
"35138/gcode/ftm400_stand__v0.gcode",
"35138/gcode/ftm400_stand__v1.gcode",
"35138/gcode/ftm400_stand__v2.gcode",
"35138/gcode/ftm400_stand__v3.gcode",
"35138/gcode/ftm400_stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35138 | gcodes_0559.tar |
35426 | TP-Link POE Wall Mount | <p>This wall mount is meant for the TP-Link TL-POE150S Injector, used for powering on a device with Power Over Ethernet while not having a compatible network plug available.</p>
<p>For testing purpose I printed this on a layer height of .3mm, however the result will be much better when printed with .10mm or .20mm layer... | [
"wall",
"mount",
"wallmount",
"thingiverse"
] | Household > Other House Equipment | [
"35426/images/large_display_img_1560_35426.jpg",
"35426/images/large_display_img_1557_35426.jpg",
"35426/images/large_display_img_1558_35426.jpg",
"35426/images/large_display_img_1555_35426.jpg",
"35426/images/large_display_img_1543_35426.jpg",
"35426/images/large_display_img_1544_35426.jpg",
"35426/ima... | [
"35426/gcode/tplink_poe_wall_mount__v0.gcode",
"35426/gcode/tplink_poe_wall_mount__v1.gcode",
"35426/gcode/tplink_poe_wall_mount__v2.gcode",
"35426/gcode/tplink_poe_wall_mount__v3.gcode",
"35426/gcode/tplink_poe_wall_mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35426 | gcodes_0559.tar |
35375 | Apple Pencil Charging Dock | <p>I dislike clutter on my desk, so I made an Apple Pencil charging dock that attaches to the side of my monitor with 3M command strips [Large, see link below].</p>
<p>The dock sticks to a wall or any other surface and provides an organized way to store and charge the Apple Pencil, the cap, and the adapter. Your cap si... | [
"stand",
"wallmount",
"dock",
"charging",
"apple",
"monitor",
"chargingdock",
"wallmounted",
"thingiverse",
"chargingstation",
"chargingstand",
"monitormount",
"3mcommandstrips",
"3mcommand",
"applepencil",
"applepencilcap",
"applepencilholder",
"applepencilstand"
] | Gadgets > Other Gadgets | [
"35375/images/5edcb6c95ab8af61f0c69a4cbae3d8ca_display_large_3.jpg",
"35375/images/6eac5ff89da0d670091a15d33aca8348_display_large_3.jpg",
"35375/images/capture_35375.jpg",
"35375/images/9b116b77cb2adafe3906d90aef468c65_display_large_35.jpg",
"35375/images/f6a37c342c95a01b1d715a4be6d35f96_display_large_35.jp... | [
"35375/gcode/pencil_dock__v0.gcode",
"35375/gcode/pencil_dock__v1.gcode",
"35375/gcode/pencil_dock__v2.gcode",
"35375/gcode/pencil_dock__v3.gcode",
"35375/gcode/pencil_dock__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35375 | gcodes_0559.tar |
35354 | Zero Motorcycles Zero S Swingarm Frame Tube Cap | <p>This is a Frame Tube Cap the Zero Motorcycles Zero S Motorcycle.<br/>
You can use it to store things in the swingarm frame tube.<br/>
I printed it in TPU and stored my warning west in the tube. :)</p>
<p>It is a very snug fit with my Prusa MK3S, so maybe first print only one and see how it fits on your bike.</p>
<... | [
"thingiverse"
] | Hobby & Makers > Automotive | [
"35354/images/large_display_swingarm_frame_tube_cap_35354.jpg",
"35354/images/large_display_20-05-12_16-48-42_8436_35354.jpg"
] | [
"35354/gcode/swingarm_frame_tube_cap__v0.gcode",
"35354/gcode/swingarm_frame_tube_cap__v1.gcode",
"35354/gcode/swingarm_frame_tube_cap__v2.gcode",
"35354/gcode/swingarm_frame_tube_cap__v3.gcode",
"35354/gcode/swingarm_frame_tube_cap__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35354 | gcodes_0559.tar |
35496 | Inch cap for cubic tank | <p>this cap reduce tank thread to 1inch pipe thread for valve</p>
<h3>Print instructions</h3><p>If you want to print the cap without our website, you can just put the .stl into the slicer, but when you print it with our website, you must split it in mmu mode...</p> | [] | Household > Outdoor & Garden | [
"35496/images/98a8f59f-c3ea-4164-b2cc-a442b003c0f6.jpg",
"35496/images/cap.jpg"
] | [
"35496/gcode/cap__v0.gcode",
"35496/gcode/cap__v1.gcode",
"35496/gcode/cap__v2.gcode",
"35496/gcode/cap__v3.gcode",
"35496/gcode/cap__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/35496 | gcodes_0559.tar |
35176 | VESA Adapter for 30 inch Apple Cinema HD Display | <p>An adapter plate for the Apple Cinema Display (30 inch).</p>
<p>This is so you can use one of these old chunky monitors on a more useful stand!</p>
<p>You'll need to remove the stand that comes with the monitor, and save those two fancy looking screws on the side. You'll also need four M4 nuts to use in the screw ho... | [
"display",
"bracket",
"apple",
"adapter",
"screen",
"thingiverse",
"macintosh",
"vesa",
"cinema"
] | Gadgets > Computers | [
"35176/images/large_display_vesa_adapter_v2_35176.jpg"
] | [
"35176/gcode/vesa_adapter_v2__v0.gcode",
"35176/gcode/vesa_adapter_v2__v1.gcode",
"35176/gcode/vesa_adapter_v2__v2.gcode",
"35176/gcode/vesa_adapter_v2__v3.gcode",
"35176/gcode/vesa_adapter_v2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35176 | gcodes_0559.tar |
35160 | Corner-Mounted Shaver Holder | <p>Designed to mount in a corner with two 3M Command strips, this holder should fit a typical electric shaver. IT may fit yours, it may not, but print it (or measure it) and find out!</p>
<h3>Print instructions</h3><h3>Category: Bathroom Summary</h3>
<p>Designed to mount in a corner with two 3M Command strips, this hol... | [
"holder",
"corner",
"thingiverse",
"3mcommandstrips",
"electricshaver"
] | Household > Bathroom | [
"35160/images/9dedff064a025c3c28d3f014d9db52cd_display_large_35.jpg",
"35160/images/95b958f80879e389e2330b9de7093ac4_display_large_35.jpg"
] | [
"35160/gcode/shaver_holder__v0.gcode",
"35160/gcode/shaver_holder__v1.gcode",
"35160/gcode/shaver_holder__v2.gcode",
"35160/gcode/shaver_holder__v3.gcode",
"35160/gcode/shaver_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35160 | gcodes_0559.tar |
35138 | FTM-400 desktop stand | <p>Yaesu FTM-400 desktop stand</p>
<h3>Print instructions</h3><p>Unassociated tags: ftm 400, ham radio</p>
<h3>Category: Electronics Summary</h3>
<p>Yaesu FTM-400 desktop stand</p> | [
"thingiverse",
"yaesu",
"amateurfunk"
] | Hobby & Makers > Electronics | [
"35138/images/6486e463eae24f5472b3bfd2dc7b413e_display_large_35.jpg"
] | [
"35138/gcode/ftm400_stand__v0.gcode",
"35138/gcode/ftm400_stand__v1.gcode",
"35138/gcode/ftm400_stand__v2.gcode",
"35138/gcode/ftm400_stand__v3.gcode",
"35138/gcode/ftm400_stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35138 | gcodes_0559.tar |
35113 | Coin Holder for Swiss franc (CHF) | <p>Coin Holder for Swiss franc (CHF) to keep my change sorted. I've added 0.5mm tolerance to the coin diameter. Coins can't fall out at the front.</p>
<h3>Print instructions</h3><p>Filament: PETG<br/>
Color: Galaxy Black<br/>
Temps: 235°C / 85°C (first layer and the rest)<br/>
Layer height: 0.2mm (first layer and the r... | [
"holder",
"coin",
"stand"
] | Hobby & Makers > Organizers | [
"35113/images/img_20200622_083038.jpg",
"35113/images/img_20200621_230024.jpg"
] | [
"35113/gcode/coin_holder__v0.gcode",
"35113/gcode/coin_holder__v1.gcode",
"35113/gcode/coin_holder__v2.gcode",
"35113/gcode/coin_holder__v3.gcode",
"35113/gcode/coin_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35113 | gcodes_0559.tar |
35375 | Apple Pencil Charging Dock | <p>I dislike clutter on my desk, so I made an Apple Pencil charging dock that attaches to the side of my monitor with 3M command strips [Large, see link below].</p>
<p>The dock sticks to a wall or any other surface and provides an organized way to store and charge the Apple Pencil, the cap, and the adapter. Your cap si... | [
"stand",
"wallmount",
"dock",
"charging",
"apple",
"monitor",
"chargingdock",
"wallmounted",
"thingiverse",
"chargingstation",
"chargingstand",
"monitormount",
"3mcommandstrips",
"3mcommand",
"applepencil",
"applepencilcap",
"applepencilholder",
"applepencilstand"
] | Gadgets > Other Gadgets | [
"35375/images/5edcb6c95ab8af61f0c69a4cbae3d8ca_display_large_3.jpg",
"35375/images/6eac5ff89da0d670091a15d33aca8348_display_large_3.jpg",
"35375/images/capture_35375.jpg",
"35375/images/9b116b77cb2adafe3906d90aef468c65_display_large_35.jpg",
"35375/images/f6a37c342c95a01b1d715a4be6d35f96_display_large_35.jp... | [
"35375/gcode/pencil_dock__v0.gcode",
"35375/gcode/pencil_dock__v1.gcode",
"35375/gcode/pencil_dock__v2.gcode",
"35375/gcode/pencil_dock__v3.gcode",
"35375/gcode/pencil_dock__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35375 | gcodes_0559.tar |
35354 | Zero Motorcycles Zero S Swingarm Frame Tube Cap | <p>This is a Frame Tube Cap the Zero Motorcycles Zero S Motorcycle.<br/>
You can use it to store things in the swingarm frame tube.<br/>
I printed it in TPU and stored my warning west in the tube. :)</p>
<p>It is a very snug fit with my Prusa MK3S, so maybe first print only one and see how it fits on your bike.</p>
<... | [
"thingiverse"
] | Hobby & Makers > Automotive | [
"35354/images/large_display_swingarm_frame_tube_cap_35354.jpg",
"35354/images/large_display_20-05-12_16-48-42_8436_35354.jpg"
] | [
"35354/gcode/swingarm_frame_tube_cap__v0.gcode",
"35354/gcode/swingarm_frame_tube_cap__v1.gcode",
"35354/gcode/swingarm_frame_tube_cap__v2.gcode",
"35354/gcode/swingarm_frame_tube_cap__v3.gcode",
"35354/gcode/swingarm_frame_tube_cap__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35354 | gcodes_0559.tar |
35496 | Inch cap for cubic tank | <p>this cap reduce tank thread to 1inch pipe thread for valve</p>
<h3>Print instructions</h3><p>If you want to print the cap without our website, you can just put the .stl into the slicer, but when you print it with our website, you must split it in mmu mode...</p> | [] | Household > Outdoor & Garden | [
"35496/images/98a8f59f-c3ea-4164-b2cc-a442b003c0f6.jpg",
"35496/images/cap.jpg"
] | [
"35496/gcode/cap__v0.gcode",
"35496/gcode/cap__v1.gcode",
"35496/gcode/cap__v2.gcode",
"35496/gcode/cap__v3.gcode",
"35496/gcode/cap__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/35496 | gcodes_0559.tar |
35176 | VESA Adapter for 30 inch Apple Cinema HD Display | <p>An adapter plate for the Apple Cinema Display (30 inch).</p>
<p>This is so you can use one of these old chunky monitors on a more useful stand!</p>
<p>You'll need to remove the stand that comes with the monitor, and save those two fancy looking screws on the side. You'll also need four M4 nuts to use in the screw ho... | [
"display",
"bracket",
"apple",
"adapter",
"screen",
"thingiverse",
"macintosh",
"vesa",
"cinema"
] | Gadgets > Computers | [
"35176/images/large_display_vesa_adapter_v2_35176.jpg"
] | [
"35176/gcode/vesa_adapter_v2__v0.gcode",
"35176/gcode/vesa_adapter_v2__v1.gcode",
"35176/gcode/vesa_adapter_v2__v2.gcode",
"35176/gcode/vesa_adapter_v2__v3.gcode",
"35176/gcode/vesa_adapter_v2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35176 | gcodes_0559.tar |
35160 | Corner-Mounted Shaver Holder | <p>Designed to mount in a corner with two 3M Command strips, this holder should fit a typical electric shaver. IT may fit yours, it may not, but print it (or measure it) and find out!</p>
<h3>Print instructions</h3><h3>Category: Bathroom Summary</h3>
<p>Designed to mount in a corner with two 3M Command strips, this hol... | [
"holder",
"corner",
"thingiverse",
"3mcommandstrips",
"electricshaver"
] | Household > Bathroom | [
"35160/images/9dedff064a025c3c28d3f014d9db52cd_display_large_35.jpg",
"35160/images/95b958f80879e389e2330b9de7093ac4_display_large_35.jpg"
] | [
"35160/gcode/shaver_holder__v0.gcode",
"35160/gcode/shaver_holder__v1.gcode",
"35160/gcode/shaver_holder__v2.gcode",
"35160/gcode/shaver_holder__v3.gcode",
"35160/gcode/shaver_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35160 | gcodes_0559.tar |
35138 | FTM-400 desktop stand | <p>Yaesu FTM-400 desktop stand</p>
<h3>Print instructions</h3><p>Unassociated tags: ftm 400, ham radio</p>
<h3>Category: Electronics Summary</h3>
<p>Yaesu FTM-400 desktop stand</p> | [
"thingiverse",
"yaesu",
"amateurfunk"
] | Hobby & Makers > Electronics | [
"35138/images/6486e463eae24f5472b3bfd2dc7b413e_display_large_35.jpg"
] | [
"35138/gcode/ftm400_stand__v0.gcode",
"35138/gcode/ftm400_stand__v1.gcode",
"35138/gcode/ftm400_stand__v2.gcode",
"35138/gcode/ftm400_stand__v3.gcode",
"35138/gcode/ftm400_stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35138 | gcodes_0559.tar |
35113 | Coin Holder for Swiss franc (CHF) | <p>Coin Holder for Swiss franc (CHF) to keep my change sorted. I've added 0.5mm tolerance to the coin diameter. Coins can't fall out at the front.</p>
<h3>Print instructions</h3><p>Filament: PETG<br/>
Color: Galaxy Black<br/>
Temps: 235°C / 85°C (first layer and the rest)<br/>
Layer height: 0.2mm (first layer and the r... | [
"holder",
"coin",
"stand"
] | Hobby & Makers > Organizers | [
"35113/images/img_20200622_083038.jpg",
"35113/images/img_20200621_230024.jpg"
] | [
"35113/gcode/coin_holder__v0.gcode",
"35113/gcode/coin_holder__v1.gcode",
"35113/gcode/coin_holder__v2.gcode",
"35113/gcode/coin_holder__v3.gcode",
"35113/gcode/coin_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35113 | gcodes_0559.tar |
35426 | TP-Link POE Wall Mount | <p>This wall mount is meant for the TP-Link TL-POE150S Injector, used for powering on a device with Power Over Ethernet while not having a compatible network plug available.</p>
<p>For testing purpose I printed this on a layer height of .3mm, however the result will be much better when printed with .10mm or .20mm layer... | [
"wall",
"mount",
"wallmount",
"thingiverse"
] | Household > Other House Equipment | [
"35426/images/large_display_img_1560_35426.jpg",
"35426/images/large_display_img_1557_35426.jpg",
"35426/images/large_display_img_1558_35426.jpg",
"35426/images/large_display_img_1555_35426.jpg",
"35426/images/large_display_img_1543_35426.jpg",
"35426/images/large_display_img_1544_35426.jpg",
"35426/ima... | [
"35426/gcode/tplink_poe_wall_mount__v0.gcode",
"35426/gcode/tplink_poe_wall_mount__v1.gcode",
"35426/gcode/tplink_poe_wall_mount__v2.gcode",
"35426/gcode/tplink_poe_wall_mount__v3.gcode",
"35426/gcode/tplink_poe_wall_mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35426 | gcodes_0559.tar |
35375 | Apple Pencil Charging Dock | <p>I dislike clutter on my desk, so I made an Apple Pencil charging dock that attaches to the side of my monitor with 3M command strips [Large, see link below].</p>
<p>The dock sticks to a wall or any other surface and provides an organized way to store and charge the Apple Pencil, the cap, and the adapter. Your cap si... | [
"stand",
"wallmount",
"dock",
"charging",
"apple",
"monitor",
"chargingdock",
"wallmounted",
"thingiverse",
"chargingstation",
"chargingstand",
"monitormount",
"3mcommandstrips",
"3mcommand",
"applepencil",
"applepencilcap",
"applepencilholder",
"applepencilstand"
] | Gadgets > Other Gadgets | [
"35375/images/5edcb6c95ab8af61f0c69a4cbae3d8ca_display_large_3.jpg",
"35375/images/6eac5ff89da0d670091a15d33aca8348_display_large_3.jpg",
"35375/images/capture_35375.jpg",
"35375/images/9b116b77cb2adafe3906d90aef468c65_display_large_35.jpg",
"35375/images/f6a37c342c95a01b1d715a4be6d35f96_display_large_35.jp... | [
"35375/gcode/pencil_dock__v0.gcode",
"35375/gcode/pencil_dock__v1.gcode",
"35375/gcode/pencil_dock__v2.gcode",
"35375/gcode/pencil_dock__v3.gcode",
"35375/gcode/pencil_dock__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35375 | gcodes_0559.tar |
35354 | Zero Motorcycles Zero S Swingarm Frame Tube Cap | <p>This is a Frame Tube Cap the Zero Motorcycles Zero S Motorcycle.<br/>
You can use it to store things in the swingarm frame tube.<br/>
I printed it in TPU and stored my warning west in the tube. :)</p>
<p>It is a very snug fit with my Prusa MK3S, so maybe first print only one and see how it fits on your bike.</p>
<... | [
"thingiverse"
] | Hobby & Makers > Automotive | [
"35354/images/large_display_swingarm_frame_tube_cap_35354.jpg",
"35354/images/large_display_20-05-12_16-48-42_8436_35354.jpg"
] | [
"35354/gcode/swingarm_frame_tube_cap__v0.gcode",
"35354/gcode/swingarm_frame_tube_cap__v1.gcode",
"35354/gcode/swingarm_frame_tube_cap__v2.gcode",
"35354/gcode/swingarm_frame_tube_cap__v3.gcode",
"35354/gcode/swingarm_frame_tube_cap__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35354 | gcodes_0559.tar |
35496 | Inch cap for cubic tank | <p>this cap reduce tank thread to 1inch pipe thread for valve</p>
<h3>Print instructions</h3><p>If you want to print the cap without our website, you can just put the .stl into the slicer, but when you print it with our website, you must split it in mmu mode...</p> | [] | Household > Outdoor & Garden | [
"35496/images/98a8f59f-c3ea-4164-b2cc-a442b003c0f6.jpg",
"35496/images/cap.jpg"
] | [
"35496/gcode/cap__v0.gcode",
"35496/gcode/cap__v1.gcode",
"35496/gcode/cap__v2.gcode",
"35496/gcode/cap__v3.gcode",
"35496/gcode/cap__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/35496 | gcodes_0559.tar |
35176 | VESA Adapter for 30 inch Apple Cinema HD Display | <p>An adapter plate for the Apple Cinema Display (30 inch).</p>
<p>This is so you can use one of these old chunky monitors on a more useful stand!</p>
<p>You'll need to remove the stand that comes with the monitor, and save those two fancy looking screws on the side. You'll also need four M4 nuts to use in the screw ho... | [
"display",
"bracket",
"apple",
"adapter",
"screen",
"thingiverse",
"macintosh",
"vesa",
"cinema"
] | Gadgets > Computers | [
"35176/images/large_display_vesa_adapter_v2_35176.jpg"
] | [
"35176/gcode/vesa_adapter_v2__v0.gcode",
"35176/gcode/vesa_adapter_v2__v1.gcode",
"35176/gcode/vesa_adapter_v2__v2.gcode",
"35176/gcode/vesa_adapter_v2__v3.gcode",
"35176/gcode/vesa_adapter_v2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35176 | gcodes_0559.tar |
35426 | TP-Link POE Wall Mount | <p>This wall mount is meant for the TP-Link TL-POE150S Injector, used for powering on a device with Power Over Ethernet while not having a compatible network plug available.</p>
<p>For testing purpose I printed this on a layer height of .3mm, however the result will be much better when printed with .10mm or .20mm layer... | [
"wall",
"mount",
"wallmount",
"thingiverse"
] | Household > Other House Equipment | [
"35426/images/large_display_img_1560_35426.jpg",
"35426/images/large_display_img_1557_35426.jpg",
"35426/images/large_display_img_1558_35426.jpg",
"35426/images/large_display_img_1555_35426.jpg",
"35426/images/large_display_img_1543_35426.jpg",
"35426/images/large_display_img_1544_35426.jpg",
"35426/ima... | [
"35426/gcode/tplink_poe_wall_mount__v0.gcode",
"35426/gcode/tplink_poe_wall_mount__v1.gcode",
"35426/gcode/tplink_poe_wall_mount__v2.gcode",
"35426/gcode/tplink_poe_wall_mount__v3.gcode",
"35426/gcode/tplink_poe_wall_mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35426 | gcodes_0560.tar |
35375 | Apple Pencil Charging Dock | <p>I dislike clutter on my desk, so I made an Apple Pencil charging dock that attaches to the side of my monitor with 3M command strips [Large, see link below].</p>
<p>The dock sticks to a wall or any other surface and provides an organized way to store and charge the Apple Pencil, the cap, and the adapter. Your cap si... | [
"stand",
"wallmount",
"dock",
"charging",
"apple",
"monitor",
"chargingdock",
"wallmounted",
"thingiverse",
"chargingstation",
"chargingstand",
"monitormount",
"3mcommandstrips",
"3mcommand",
"applepencil",
"applepencilcap",
"applepencilholder",
"applepencilstand"
] | Gadgets > Other Gadgets | [
"35375/images/5edcb6c95ab8af61f0c69a4cbae3d8ca_display_large_3.jpg",
"35375/images/6eac5ff89da0d670091a15d33aca8348_display_large_3.jpg",
"35375/images/capture_35375.jpg",
"35375/images/9b116b77cb2adafe3906d90aef468c65_display_large_35.jpg",
"35375/images/f6a37c342c95a01b1d715a4be6d35f96_display_large_35.jp... | [
"35375/gcode/pencil_dock__v0.gcode",
"35375/gcode/pencil_dock__v1.gcode",
"35375/gcode/pencil_dock__v2.gcode",
"35375/gcode/pencil_dock__v3.gcode",
"35375/gcode/pencil_dock__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35375 | gcodes_0560.tar |
35354 | Zero Motorcycles Zero S Swingarm Frame Tube Cap | <p>This is a Frame Tube Cap the Zero Motorcycles Zero S Motorcycle.<br/>
You can use it to store things in the swingarm frame tube.<br/>
I printed it in TPU and stored my warning west in the tube. :)</p>
<p>It is a very snug fit with my Prusa MK3S, so maybe first print only one and see how it fits on your bike.</p>
<... | [
"thingiverse"
] | Hobby & Makers > Automotive | [
"35354/images/large_display_swingarm_frame_tube_cap_35354.jpg",
"35354/images/large_display_20-05-12_16-48-42_8436_35354.jpg"
] | [
"35354/gcode/swingarm_frame_tube_cap__v0.gcode",
"35354/gcode/swingarm_frame_tube_cap__v1.gcode",
"35354/gcode/swingarm_frame_tube_cap__v2.gcode",
"35354/gcode/swingarm_frame_tube_cap__v3.gcode",
"35354/gcode/swingarm_frame_tube_cap__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35354 | gcodes_0560.tar |
35496 | Inch cap for cubic tank | <p>this cap reduce tank thread to 1inch pipe thread for valve</p>
<h3>Print instructions</h3><p>If you want to print the cap without our website, you can just put the .stl into the slicer, but when you print it with our website, you must split it in mmu mode...</p> | [] | Household > Outdoor & Garden | [
"35496/images/98a8f59f-c3ea-4164-b2cc-a442b003c0f6.jpg",
"35496/images/cap.jpg"
] | [
"35496/gcode/cap__v0.gcode",
"35496/gcode/cap__v1.gcode",
"35496/gcode/cap__v2.gcode",
"35496/gcode/cap__v3.gcode",
"35496/gcode/cap__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/35496 | gcodes_0560.tar |
35426 | TP-Link POE Wall Mount | <p>This wall mount is meant for the TP-Link TL-POE150S Injector, used for powering on a device with Power Over Ethernet while not having a compatible network plug available.</p>
<p>For testing purpose I printed this on a layer height of .3mm, however the result will be much better when printed with .10mm or .20mm layer... | [
"wall",
"mount",
"wallmount",
"thingiverse"
] | Household > Other House Equipment | [
"35426/images/large_display_img_1560_35426.jpg",
"35426/images/large_display_img_1557_35426.jpg",
"35426/images/large_display_img_1558_35426.jpg",
"35426/images/large_display_img_1555_35426.jpg",
"35426/images/large_display_img_1543_35426.jpg",
"35426/images/large_display_img_1544_35426.jpg",
"35426/ima... | [
"35426/gcode/tplink_poe_wall_mount__v0.gcode",
"35426/gcode/tplink_poe_wall_mount__v1.gcode",
"35426/gcode/tplink_poe_wall_mount__v2.gcode",
"35426/gcode/tplink_poe_wall_mount__v3.gcode",
"35426/gcode/tplink_poe_wall_mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35426 | gcodes_0560.tar |
35496 | Inch cap for cubic tank | <p>this cap reduce tank thread to 1inch pipe thread for valve</p>
<h3>Print instructions</h3><p>If you want to print the cap without our website, you can just put the .stl into the slicer, but when you print it with our website, you must split it in mmu mode...</p> | [] | Household > Outdoor & Garden | [
"35496/images/98a8f59f-c3ea-4164-b2cc-a442b003c0f6.jpg",
"35496/images/cap.jpg"
] | [
"35496/gcode/cap__v0.gcode",
"35496/gcode/cap__v1.gcode",
"35496/gcode/cap__v2.gcode",
"35496/gcode/cap__v3.gcode",
"35496/gcode/cap__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/35496 | gcodes_0560.tar |
35375 | Apple Pencil Charging Dock | <p>I dislike clutter on my desk, so I made an Apple Pencil charging dock that attaches to the side of my monitor with 3M command strips [Large, see link below].</p>
<p>The dock sticks to a wall or any other surface and provides an organized way to store and charge the Apple Pencil, the cap, and the adapter. Your cap si... | [
"stand",
"wallmount",
"dock",
"charging",
"apple",
"monitor",
"chargingdock",
"wallmounted",
"thingiverse",
"chargingstation",
"chargingstand",
"monitormount",
"3mcommandstrips",
"3mcommand",
"applepencil",
"applepencilcap",
"applepencilholder",
"applepencilstand"
] | Gadgets > Other Gadgets | [
"35375/images/5edcb6c95ab8af61f0c69a4cbae3d8ca_display_large_3.jpg",
"35375/images/6eac5ff89da0d670091a15d33aca8348_display_large_3.jpg",
"35375/images/capture_35375.jpg",
"35375/images/9b116b77cb2adafe3906d90aef468c65_display_large_35.jpg",
"35375/images/f6a37c342c95a01b1d715a4be6d35f96_display_large_35.jp... | [
"35375/gcode/pencil_dock__v0.gcode",
"35375/gcode/pencil_dock__v1.gcode",
"35375/gcode/pencil_dock__v2.gcode",
"35375/gcode/pencil_dock__v3.gcode",
"35375/gcode/pencil_dock__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35375 | gcodes_0560.tar |
35354 | Zero Motorcycles Zero S Swingarm Frame Tube Cap | <p>This is a Frame Tube Cap the Zero Motorcycles Zero S Motorcycle.<br/>
You can use it to store things in the swingarm frame tube.<br/>
I printed it in TPU and stored my warning west in the tube. :)</p>
<p>It is a very snug fit with my Prusa MK3S, so maybe first print only one and see how it fits on your bike.</p>
<... | [
"thingiverse"
] | Hobby & Makers > Automotive | [
"35354/images/large_display_swingarm_frame_tube_cap_35354.jpg",
"35354/images/large_display_20-05-12_16-48-42_8436_35354.jpg"
] | [
"35354/gcode/swingarm_frame_tube_cap__v0.gcode",
"35354/gcode/swingarm_frame_tube_cap__v1.gcode",
"35354/gcode/swingarm_frame_tube_cap__v2.gcode",
"35354/gcode/swingarm_frame_tube_cap__v3.gcode",
"35354/gcode/swingarm_frame_tube_cap__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35354 | gcodes_0560.tar |
35265 | Prusa Sized Artichoke Lamp Shade | <p>I like the design, but since my Prusa i3 MK2 has a max build height of 20cm I had to re-scale it a little. Since making it smaller would have also made the hole for the light socket too small that had to change too.</p>
<h3>Print instructions</h3><h3>Category: Decor Summary</h3>
<p>I like the design, but since my Pr... | [
"lampshade",
"thingiverse"
] | Household > Home Decor | [
"35265/images/e34e5341ada4ee0fc466068fb026b9d9_display_large_35.jpg"
] | [
"35265/gcode/artichokelampshade__v0.gcode",
"35265/gcode/artichokelampshade__v1.gcode",
"35265/gcode/artichokelampshade__v2.gcode",
"35265/gcode/artichokelampshade__v3.gcode",
"35265/gcode/artichokelampshade__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35265 | gcodes_0561.tar |
35426 | TP-Link POE Wall Mount | <p>This wall mount is meant for the TP-Link TL-POE150S Injector, used for powering on a device with Power Over Ethernet while not having a compatible network plug available.</p>
<p>For testing purpose I printed this on a layer height of .3mm, however the result will be much better when printed with .10mm or .20mm layer... | [
"wall",
"mount",
"wallmount",
"thingiverse"
] | Household > Other House Equipment | [
"35426/images/large_display_img_1560_35426.jpg",
"35426/images/large_display_img_1557_35426.jpg",
"35426/images/large_display_img_1558_35426.jpg",
"35426/images/large_display_img_1555_35426.jpg",
"35426/images/large_display_img_1543_35426.jpg",
"35426/images/large_display_img_1544_35426.jpg",
"35426/ima... | [
"35426/gcode/tplink_poe_wall_mount__v0.gcode",
"35426/gcode/tplink_poe_wall_mount__v1.gcode",
"35426/gcode/tplink_poe_wall_mount__v2.gcode",
"35426/gcode/tplink_poe_wall_mount__v3.gcode",
"35426/gcode/tplink_poe_wall_mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35426 | gcodes_0561.tar |
35496 | Inch cap for cubic tank | <p>this cap reduce tank thread to 1inch pipe thread for valve</p>
<h3>Print instructions</h3><p>If you want to print the cap without our website, you can just put the .stl into the slicer, but when you print it with our website, you must split it in mmu mode...</p> | [] | Household > Outdoor & Garden | [
"35496/images/98a8f59f-c3ea-4164-b2cc-a442b003c0f6.jpg",
"35496/images/cap.jpg"
] | [
"35496/gcode/cap__v0.gcode",
"35496/gcode/cap__v1.gcode",
"35496/gcode/cap__v2.gcode",
"35496/gcode/cap__v3.gcode",
"35496/gcode/cap__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/35496 | gcodes_0561.tar |
35375 | Apple Pencil Charging Dock | <p>I dislike clutter on my desk, so I made an Apple Pencil charging dock that attaches to the side of my monitor with 3M command strips [Large, see link below].</p>
<p>The dock sticks to a wall or any other surface and provides an organized way to store and charge the Apple Pencil, the cap, and the adapter. Your cap si... | [
"stand",
"wallmount",
"dock",
"charging",
"apple",
"monitor",
"chargingdock",
"wallmounted",
"thingiverse",
"chargingstation",
"chargingstand",
"monitormount",
"3mcommandstrips",
"3mcommand",
"applepencil",
"applepencilcap",
"applepencilholder",
"applepencilstand"
] | Gadgets > Other Gadgets | [
"35375/images/5edcb6c95ab8af61f0c69a4cbae3d8ca_display_large_3.jpg",
"35375/images/6eac5ff89da0d670091a15d33aca8348_display_large_3.jpg",
"35375/images/capture_35375.jpg",
"35375/images/9b116b77cb2adafe3906d90aef468c65_display_large_35.jpg",
"35375/images/f6a37c342c95a01b1d715a4be6d35f96_display_large_35.jp... | [
"35375/gcode/pencil_dock__v0.gcode",
"35375/gcode/pencil_dock__v1.gcode",
"35375/gcode/pencil_dock__v2.gcode",
"35375/gcode/pencil_dock__v3.gcode",
"35375/gcode/pencil_dock__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35375 | gcodes_0561.tar |
35354 | Zero Motorcycles Zero S Swingarm Frame Tube Cap | <p>This is a Frame Tube Cap the Zero Motorcycles Zero S Motorcycle.<br/>
You can use it to store things in the swingarm frame tube.<br/>
I printed it in TPU and stored my warning west in the tube. :)</p>
<p>It is a very snug fit with my Prusa MK3S, so maybe first print only one and see how it fits on your bike.</p>
<... | [
"thingiverse"
] | Hobby & Makers > Automotive | [
"35354/images/large_display_swingarm_frame_tube_cap_35354.jpg",
"35354/images/large_display_20-05-12_16-48-42_8436_35354.jpg"
] | [
"35354/gcode/swingarm_frame_tube_cap__v0.gcode",
"35354/gcode/swingarm_frame_tube_cap__v1.gcode",
"35354/gcode/swingarm_frame_tube_cap__v2.gcode",
"35354/gcode/swingarm_frame_tube_cap__v3.gcode",
"35354/gcode/swingarm_frame_tube_cap__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35354 | gcodes_0561.tar |
35176 | VESA Adapter for 30 inch Apple Cinema HD Display | <p>An adapter plate for the Apple Cinema Display (30 inch).</p>
<p>This is so you can use one of these old chunky monitors on a more useful stand!</p>
<p>You'll need to remove the stand that comes with the monitor, and save those two fancy looking screws on the side. You'll also need four M4 nuts to use in the screw ho... | [
"display",
"bracket",
"apple",
"adapter",
"screen",
"thingiverse",
"macintosh",
"vesa",
"cinema"
] | Gadgets > Computers | [
"35176/images/large_display_vesa_adapter_v2_35176.jpg"
] | [
"35176/gcode/vesa_adapter_v2__v0.gcode",
"35176/gcode/vesa_adapter_v2__v1.gcode",
"35176/gcode/vesa_adapter_v2__v2.gcode",
"35176/gcode/vesa_adapter_v2__v3.gcode",
"35176/gcode/vesa_adapter_v2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35176 | gcodes_0561.tar |
35160 | Corner-Mounted Shaver Holder | <p>Designed to mount in a corner with two 3M Command strips, this holder should fit a typical electric shaver. IT may fit yours, it may not, but print it (or measure it) and find out!</p>
<h3>Print instructions</h3><h3>Category: Bathroom Summary</h3>
<p>Designed to mount in a corner with two 3M Command strips, this hol... | [
"holder",
"corner",
"thingiverse",
"3mcommandstrips",
"electricshaver"
] | Household > Bathroom | [
"35160/images/9dedff064a025c3c28d3f014d9db52cd_display_large_35.jpg",
"35160/images/95b958f80879e389e2330b9de7093ac4_display_large_35.jpg"
] | [
"35160/gcode/shaver_holder__v0.gcode",
"35160/gcode/shaver_holder__v1.gcode",
"35160/gcode/shaver_holder__v2.gcode",
"35160/gcode/shaver_holder__v3.gcode",
"35160/gcode/shaver_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35160 | gcodes_0561.tar |
35138 | FTM-400 desktop stand | <p>Yaesu FTM-400 desktop stand</p>
<h3>Print instructions</h3><p>Unassociated tags: ftm 400, ham radio</p>
<h3>Category: Electronics Summary</h3>
<p>Yaesu FTM-400 desktop stand</p> | [
"thingiverse",
"yaesu",
"amateurfunk"
] | Hobby & Makers > Electronics | [
"35138/images/6486e463eae24f5472b3bfd2dc7b413e_display_large_35.jpg"
] | [
"35138/gcode/ftm400_stand__v0.gcode",
"35138/gcode/ftm400_stand__v1.gcode",
"35138/gcode/ftm400_stand__v2.gcode",
"35138/gcode/ftm400_stand__v3.gcode",
"35138/gcode/ftm400_stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35138 | gcodes_0561.tar |
35265 | Prusa Sized Artichoke Lamp Shade | <p>I like the design, but since my Prusa i3 MK2 has a max build height of 20cm I had to re-scale it a little. Since making it smaller would have also made the hole for the light socket too small that had to change too.</p>
<h3>Print instructions</h3><h3>Category: Decor Summary</h3>
<p>I like the design, but since my Pr... | [
"lampshade",
"thingiverse"
] | Household > Home Decor | [
"35265/images/e34e5341ada4ee0fc466068fb026b9d9_display_large_35.jpg"
] | [
"35265/gcode/artichokelampshade__v0.gcode",
"35265/gcode/artichokelampshade__v1.gcode",
"35265/gcode/artichokelampshade__v2.gcode",
"35265/gcode/artichokelampshade__v3.gcode",
"35265/gcode/artichokelampshade__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35265 | gcodes_0561.tar |
35018 | Microscope Stand Upgrade | <p>An upgraded stand for this popular and inexpensive USB microscope (Jiusion 1000x and similar).</p>
<p>The clamp that comes in in the kit it's way too flexible, making it really hard to focus. This upgrade uses a simple trick to hold the microscope steadier: the clamp itself gets tightened by the same screw mechanism... | [
"camera",
"stand",
"bracket",
"clamp",
"macro",
"endoscope",
"thingiverse",
"microscope",
"zoom",
"magnification",
"jiusion"
] | Hobby & Makers > Electronics | [
"35018/images/f7c472bd094bfd2f5498c11a586da785_display_large_35.jpg",
"35018/images/4341d42443cbed87ee0a1e9f85d8c34f_display_large_35.jpg",
"35018/images/d92debd768234dcdbb1b077844122e4b_display_large_35.jpg",
"35018/images/2b1b8ad7bbab2f43f5b4ac8fab9b5d60_display_large_35.jpg"
] | [
"35018/gcode/microscope__v0.gcode",
"35018/gcode/microscope__v1.gcode",
"35018/gcode/microscope__v2.gcode",
"35018/gcode/microscope__v3.gcode",
"35018/gcode/microscope__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35018 | gcodes_0561.tar |
33457 | Logitec C270 articulated arm to Ender 3 adapter | <p>This adapter connects an articulated arm, which holds a C270 webcam, to the frame of an Ender 3 Pro with the help of two T-nuts and two M3x10 screws.</p>
<p>Just print this adapter, and mount it to the left rail of your Ender 3 with two of these T-nuts:<br/>
<a href="https://www.thingiverse.com/thing:3050607">https:... | [
"logitechc270",
"ender3",
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"33457/images/large_display_complete_camera_arm_on_ender_33457.jpg",
"33457/images/large_display_camera_arm_adapter_mounted_on_ender.jpg",
"33457/images/large_display_adapter_with_t-nuts_33457.jpg",
"33457/images/large_display_articulated_arm_to_ender_3_adapter_.jpg"
] | [
"33457/gcode/articulated_arm_to_ender_3_adapter__v0.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v1.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v2.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v3.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33457 | gcodes_0561.tar |
33451 | Prusa i3 Mk3S extruder indicator | <p>This little extruder indicator was inspired by others with a similar design. They did not fully meet my needs, so I made my own.</p>
<p>My design specification included:</p>
<ul>
<li>indication needs to be unique over a 360° range, i.e. no repetitive pattern (which is really helpful if you watch via a camera live st... | [
"extruder",
"thingiverse"
] | 3D Printers > Prusa Parts & Upgrades | [
"33451/images/large_display_extruder_indicator_photo_33451.jpg",
"33451/images/large_display_bildschirmfoto_vom_2020-02-28_21-45.jpg",
"33451/images/large_display_extruder_indicator_33451.jpg"
] | [
"33451/gcode/extruder_indicator__v0.gcode",
"33451/gcode/extruder_indicator__v1.gcode",
"33451/gcode/extruder_indicator__v2.gcode",
"33451/gcode/extruder_indicator__v3.gcode",
"33451/gcode/extruder_indicator__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33451 | gcodes_0561.tar |
33405 | Arduino MKR series simple stand | <p>The new arduino form factor has long thin pins that are protected by a conductive foam inside of the box. This is a simple stand that covers and protect those pins.</p>
<h3>Print instructions</h3><h3>Category: Electronics Summary</h3>
<p>The new arduino form factor has long thin pins that are protected by a conducti... | [
"stand",
"arduino",
"arduinocase",
"thingiverse",
"mkr",
"mkr1000",
"mkr1500"
] | Hobby & Makers > Electronics | [
"33405/images/df0ef6aa88bdca77df722214f493878c_display_large_33.jpg",
"33405/images/cb18ac913b4e0d3942ed453208b3df1b_display_large_33.jpg",
"33405/images/32c567325611430dfcb6927542620324_display_large_33.jpg",
"33405/images/624781954fd5845171f868fdb26d3af2_display_large_33.jpg"
] | [
"33405/gcode/stand__v0.gcode",
"33405/gcode/stand__v1.gcode",
"33405/gcode/stand__v2.gcode",
"33405/gcode/stand__v3.gcode",
"33405/gcode/stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33405 | gcodes_0561.tar |
35113 | Coin Holder for Swiss franc (CHF) | <p>Coin Holder for Swiss franc (CHF) to keep my change sorted. I've added 0.5mm tolerance to the coin diameter. Coins can't fall out at the front.</p>
<h3>Print instructions</h3><p>Filament: PETG<br/>
Color: Galaxy Black<br/>
Temps: 235°C / 85°C (first layer and the rest)<br/>
Layer height: 0.2mm (first layer and the r... | [
"holder",
"coin",
"stand"
] | Hobby & Makers > Organizers | [
"35113/images/img_20200622_083038.jpg",
"35113/images/img_20200621_230024.jpg"
] | [
"35113/gcode/coin_holder__v0.gcode",
"35113/gcode/coin_holder__v1.gcode",
"35113/gcode/coin_holder__v2.gcode",
"35113/gcode/coin_holder__v3.gcode",
"35113/gcode/coin_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35113 | gcodes_0561.tar |
32782 | Soporte para móvil o tablet | <p>Soporte para móvil o tablet</p>
| [] | 3D Printers > Accessories | [
"32782/images/soporte-movil-o-tablets-kenybuey-2.jpg",
"32782/images/soporte-movil-o-tablets-kenybuey.jpg"
] | [
"32782/gcode/soporte-movil-tablet-kenybuey__v0.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v1.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v2.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v3.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/32782 | gcodes_0561.tar |
32846 | Cthulhu!! | <p>This model is designed to be printed on FDM without need for any supports.<br/>
On the photos you can see it printed in PLA, using 0.8mm diameter nozzle, in 500% (~10cm) and 1000% (~20cm) scale.<br/>
made using BLENDER 2.81</p>
<p>link to render:</p>
<p>
<figure class="media">
<oembed url="https://youtu.be/_D6ukogLY... | [
"mini",
"monster",
"horror",
"fantasy",
"sculpt",
"sculpture",
"lovecraft",
"monsters",
"cthulhu",
"miniatures",
"contest",
"nosupport",
"nosupportneeded",
"eldritchhorror",
"3dsculpture",
"thecallofcthulhu",
"nosupports",
"arkhamhorror",
"sculpting"
] | Art & Design > Sculptures | [
"32846/images/cthulhu5.jpg",
"32846/images/cthulhu1.jpg",
"32846/images/cthulhu3.jpg",
"32846/images/cthulhu4.jpg",
"32846/images/cthulhu2.jpg",
"32846/images/101390714_3325706317461228_5792910534755359241_n.jpg",
"32846/images/102301984_697359921054378_2276774146983921844_n.jpg",
"32846/images/101793... | [
"32846/gcode/kajtek_k_cthulhu__v0.gcode",
"32846/gcode/kajtek_k_cthulhu__v1.gcode",
"32846/gcode/kajtek_k_cthulhu__v2.gcode",
"32846/gcode/kajtek_k_cthulhu__v3.gcode",
"32846/gcode/kajtek_k_cthulhu__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/32846 | gcodes_0561.tar |
32289 | CNC 3018 X and Y axis knob (knurled surface) | <p>This is hand wheels knob for CNC 3018 X and Z axis (diameter 8 mm). Printed grey looks very nice on machine.</p>
<p>Knob radius is 24 mm and thickness is 10 mm. It is meant to be used on 8 mm lead screw so it has 8.1 mm hole which is big enough that knob tightly sits on leading screw so it can easily turn leading sc... | [
"knob",
"screw",
"cnc",
"xaxis",
"3018",
"axis",
"yaxis",
"cnc3018",
"leadingscrew"
] | Hobby & Makers > Mechanical Parts | [
"32289/images/y-axis-knob.jpg",
"32289/images/x-axis-knob.jpg"
] | [
"32289/gcode/axis-knob-kurling-10x24mm__v0.gcode",
"32289/gcode/axis-knob-kurling-10x24mm__v1.gcode",
"32289/gcode/axis-knob-kurling-10x24mm__v2.gcode",
"32289/gcode/axis-knob-kurling-10x24mm__v3.gcode",
"32289/gcode/axis-knob-kurling-10x24mm__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/32289 | gcodes_0561.tar |
35426 | TP-Link POE Wall Mount | <p>This wall mount is meant for the TP-Link TL-POE150S Injector, used for powering on a device with Power Over Ethernet while not having a compatible network plug available.</p>
<p>For testing purpose I printed this on a layer height of .3mm, however the result will be much better when printed with .10mm or .20mm layer... | [
"wall",
"mount",
"wallmount",
"thingiverse"
] | Household > Other House Equipment | [
"35426/images/large_display_img_1560_35426.jpg",
"35426/images/large_display_img_1557_35426.jpg",
"35426/images/large_display_img_1558_35426.jpg",
"35426/images/large_display_img_1555_35426.jpg",
"35426/images/large_display_img_1543_35426.jpg",
"35426/images/large_display_img_1544_35426.jpg",
"35426/ima... | [
"35426/gcode/tplink_poe_wall_mount__v0.gcode",
"35426/gcode/tplink_poe_wall_mount__v1.gcode",
"35426/gcode/tplink_poe_wall_mount__v2.gcode",
"35426/gcode/tplink_poe_wall_mount__v3.gcode",
"35426/gcode/tplink_poe_wall_mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35426 | gcodes_0561.tar |
35375 | Apple Pencil Charging Dock | <p>I dislike clutter on my desk, so I made an Apple Pencil charging dock that attaches to the side of my monitor with 3M command strips [Large, see link below].</p>
<p>The dock sticks to a wall or any other surface and provides an organized way to store and charge the Apple Pencil, the cap, and the adapter. Your cap si... | [
"stand",
"wallmount",
"dock",
"charging",
"apple",
"monitor",
"chargingdock",
"wallmounted",
"thingiverse",
"chargingstation",
"chargingstand",
"monitormount",
"3mcommandstrips",
"3mcommand",
"applepencil",
"applepencilcap",
"applepencilholder",
"applepencilstand"
] | Gadgets > Other Gadgets | [
"35375/images/5edcb6c95ab8af61f0c69a4cbae3d8ca_display_large_3.jpg",
"35375/images/6eac5ff89da0d670091a15d33aca8348_display_large_3.jpg",
"35375/images/capture_35375.jpg",
"35375/images/9b116b77cb2adafe3906d90aef468c65_display_large_35.jpg",
"35375/images/f6a37c342c95a01b1d715a4be6d35f96_display_large_35.jp... | [
"35375/gcode/pencil_dock__v0.gcode",
"35375/gcode/pencil_dock__v1.gcode",
"35375/gcode/pencil_dock__v2.gcode",
"35375/gcode/pencil_dock__v3.gcode",
"35375/gcode/pencil_dock__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35375 | gcodes_0561.tar |
35354 | Zero Motorcycles Zero S Swingarm Frame Tube Cap | <p>This is a Frame Tube Cap the Zero Motorcycles Zero S Motorcycle.<br/>
You can use it to store things in the swingarm frame tube.<br/>
I printed it in TPU and stored my warning west in the tube. :)</p>
<p>It is a very snug fit with my Prusa MK3S, so maybe first print only one and see how it fits on your bike.</p>
<... | [
"thingiverse"
] | Hobby & Makers > Automotive | [
"35354/images/large_display_swingarm_frame_tube_cap_35354.jpg",
"35354/images/large_display_20-05-12_16-48-42_8436_35354.jpg"
] | [
"35354/gcode/swingarm_frame_tube_cap__v0.gcode",
"35354/gcode/swingarm_frame_tube_cap__v1.gcode",
"35354/gcode/swingarm_frame_tube_cap__v2.gcode",
"35354/gcode/swingarm_frame_tube_cap__v3.gcode",
"35354/gcode/swingarm_frame_tube_cap__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35354 | gcodes_0561.tar |
35496 | Inch cap for cubic tank | <p>this cap reduce tank thread to 1inch pipe thread for valve</p>
<h3>Print instructions</h3><p>If you want to print the cap without our website, you can just put the .stl into the slicer, but when you print it with our website, you must split it in mmu mode...</p> | [] | Household > Outdoor & Garden | [
"35496/images/98a8f59f-c3ea-4164-b2cc-a442b003c0f6.jpg",
"35496/images/cap.jpg"
] | [
"35496/gcode/cap__v0.gcode",
"35496/gcode/cap__v1.gcode",
"35496/gcode/cap__v2.gcode",
"35496/gcode/cap__v3.gcode",
"35496/gcode/cap__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/35496 | gcodes_0561.tar |
35176 | VESA Adapter for 30 inch Apple Cinema HD Display | <p>An adapter plate for the Apple Cinema Display (30 inch).</p>
<p>This is so you can use one of these old chunky monitors on a more useful stand!</p>
<p>You'll need to remove the stand that comes with the monitor, and save those two fancy looking screws on the side. You'll also need four M4 nuts to use in the screw ho... | [
"display",
"bracket",
"apple",
"adapter",
"screen",
"thingiverse",
"macintosh",
"vesa",
"cinema"
] | Gadgets > Computers | [
"35176/images/large_display_vesa_adapter_v2_35176.jpg"
] | [
"35176/gcode/vesa_adapter_v2__v0.gcode",
"35176/gcode/vesa_adapter_v2__v1.gcode",
"35176/gcode/vesa_adapter_v2__v2.gcode",
"35176/gcode/vesa_adapter_v2__v3.gcode",
"35176/gcode/vesa_adapter_v2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35176 | gcodes_0561.tar |
35160 | Corner-Mounted Shaver Holder | <p>Designed to mount in a corner with two 3M Command strips, this holder should fit a typical electric shaver. IT may fit yours, it may not, but print it (or measure it) and find out!</p>
<h3>Print instructions</h3><h3>Category: Bathroom Summary</h3>
<p>Designed to mount in a corner with two 3M Command strips, this hol... | [
"holder",
"corner",
"thingiverse",
"3mcommandstrips",
"electricshaver"
] | Household > Bathroom | [
"35160/images/9dedff064a025c3c28d3f014d9db52cd_display_large_35.jpg",
"35160/images/95b958f80879e389e2330b9de7093ac4_display_large_35.jpg"
] | [
"35160/gcode/shaver_holder__v0.gcode",
"35160/gcode/shaver_holder__v1.gcode",
"35160/gcode/shaver_holder__v2.gcode",
"35160/gcode/shaver_holder__v3.gcode",
"35160/gcode/shaver_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35160 | gcodes_0561.tar |
35138 | FTM-400 desktop stand | <p>Yaesu FTM-400 desktop stand</p>
<h3>Print instructions</h3><p>Unassociated tags: ftm 400, ham radio</p>
<h3>Category: Electronics Summary</h3>
<p>Yaesu FTM-400 desktop stand</p> | [
"thingiverse",
"yaesu",
"amateurfunk"
] | Hobby & Makers > Electronics | [
"35138/images/6486e463eae24f5472b3bfd2dc7b413e_display_large_35.jpg"
] | [
"35138/gcode/ftm400_stand__v0.gcode",
"35138/gcode/ftm400_stand__v1.gcode",
"35138/gcode/ftm400_stand__v2.gcode",
"35138/gcode/ftm400_stand__v3.gcode",
"35138/gcode/ftm400_stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35138 | gcodes_0561.tar |
35113 | Coin Holder for Swiss franc (CHF) | <p>Coin Holder for Swiss franc (CHF) to keep my change sorted. I've added 0.5mm tolerance to the coin diameter. Coins can't fall out at the front.</p>
<h3>Print instructions</h3><p>Filament: PETG<br/>
Color: Galaxy Black<br/>
Temps: 235°C / 85°C (first layer and the rest)<br/>
Layer height: 0.2mm (first layer and the r... | [
"holder",
"coin",
"stand"
] | Hobby & Makers > Organizers | [
"35113/images/img_20200622_083038.jpg",
"35113/images/img_20200621_230024.jpg"
] | [
"35113/gcode/coin_holder__v0.gcode",
"35113/gcode/coin_holder__v1.gcode",
"35113/gcode/coin_holder__v2.gcode",
"35113/gcode/coin_holder__v3.gcode",
"35113/gcode/coin_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35113 | gcodes_0561.tar |
35018 | Microscope Stand Upgrade | <p>An upgraded stand for this popular and inexpensive USB microscope (Jiusion 1000x and similar).</p>
<p>The clamp that comes in in the kit it's way too flexible, making it really hard to focus. This upgrade uses a simple trick to hold the microscope steadier: the clamp itself gets tightened by the same screw mechanism... | [
"camera",
"stand",
"bracket",
"clamp",
"macro",
"endoscope",
"thingiverse",
"microscope",
"zoom",
"magnification",
"jiusion"
] | Hobby & Makers > Electronics | [
"35018/images/f7c472bd094bfd2f5498c11a586da785_display_large_35.jpg",
"35018/images/4341d42443cbed87ee0a1e9f85d8c34f_display_large_35.jpg",
"35018/images/d92debd768234dcdbb1b077844122e4b_display_large_35.jpg",
"35018/images/2b1b8ad7bbab2f43f5b4ac8fab9b5d60_display_large_35.jpg"
] | [
"35018/gcode/microscope__v0.gcode",
"35018/gcode/microscope__v1.gcode",
"35018/gcode/microscope__v2.gcode",
"35018/gcode/microscope__v3.gcode",
"35018/gcode/microscope__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35018 | gcodes_0561.tar |
33457 | Logitec C270 articulated arm to Ender 3 adapter | <p>This adapter connects an articulated arm, which holds a C270 webcam, to the frame of an Ender 3 Pro with the help of two T-nuts and two M3x10 screws.</p>
<p>Just print this adapter, and mount it to the left rail of your Ender 3 with two of these T-nuts:<br/>
<a href="https://www.thingiverse.com/thing:3050607">https:... | [
"logitechc270",
"ender3",
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"33457/images/large_display_complete_camera_arm_on_ender_33457.jpg",
"33457/images/large_display_camera_arm_adapter_mounted_on_ender.jpg",
"33457/images/large_display_adapter_with_t-nuts_33457.jpg",
"33457/images/large_display_articulated_arm_to_ender_3_adapter_.jpg"
] | [
"33457/gcode/articulated_arm_to_ender_3_adapter__v0.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v1.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v2.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v3.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33457 | gcodes_0561.tar |
33451 | Prusa i3 Mk3S extruder indicator | <p>This little extruder indicator was inspired by others with a similar design. They did not fully meet my needs, so I made my own.</p>
<p>My design specification included:</p>
<ul>
<li>indication needs to be unique over a 360° range, i.e. no repetitive pattern (which is really helpful if you watch via a camera live st... | [
"extruder",
"thingiverse"
] | 3D Printers > Prusa Parts & Upgrades | [
"33451/images/large_display_extruder_indicator_photo_33451.jpg",
"33451/images/large_display_bildschirmfoto_vom_2020-02-28_21-45.jpg",
"33451/images/large_display_extruder_indicator_33451.jpg"
] | [
"33451/gcode/extruder_indicator__v0.gcode",
"33451/gcode/extruder_indicator__v1.gcode",
"33451/gcode/extruder_indicator__v2.gcode",
"33451/gcode/extruder_indicator__v3.gcode",
"33451/gcode/extruder_indicator__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33451 | gcodes_0561.tar |
33405 | Arduino MKR series simple stand | <p>The new arduino form factor has long thin pins that are protected by a conductive foam inside of the box. This is a simple stand that covers and protect those pins.</p>
<h3>Print instructions</h3><h3>Category: Electronics Summary</h3>
<p>The new arduino form factor has long thin pins that are protected by a conducti... | [
"stand",
"arduino",
"arduinocase",
"thingiverse",
"mkr",
"mkr1000",
"mkr1500"
] | Hobby & Makers > Electronics | [
"33405/images/df0ef6aa88bdca77df722214f493878c_display_large_33.jpg",
"33405/images/cb18ac913b4e0d3942ed453208b3df1b_display_large_33.jpg",
"33405/images/32c567325611430dfcb6927542620324_display_large_33.jpg",
"33405/images/624781954fd5845171f868fdb26d3af2_display_large_33.jpg"
] | [
"33405/gcode/stand__v0.gcode",
"33405/gcode/stand__v1.gcode",
"33405/gcode/stand__v2.gcode",
"33405/gcode/stand__v3.gcode",
"33405/gcode/stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33405 | gcodes_0561.tar |
32782 | Soporte para móvil o tablet | <p>Soporte para móvil o tablet</p>
| [] | 3D Printers > Accessories | [
"32782/images/soporte-movil-o-tablets-kenybuey-2.jpg",
"32782/images/soporte-movil-o-tablets-kenybuey.jpg"
] | [
"32782/gcode/soporte-movil-tablet-kenybuey__v0.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v1.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v2.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v3.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/32782 | gcodes_0561.tar |
32846 | Cthulhu!! | <p>This model is designed to be printed on FDM without need for any supports.<br/>
On the photos you can see it printed in PLA, using 0.8mm diameter nozzle, in 500% (~10cm) and 1000% (~20cm) scale.<br/>
made using BLENDER 2.81</p>
<p>link to render:</p>
<p>
<figure class="media">
<oembed url="https://youtu.be/_D6ukogLY... | [
"mini",
"monster",
"horror",
"fantasy",
"sculpt",
"sculpture",
"lovecraft",
"monsters",
"cthulhu",
"miniatures",
"contest",
"nosupport",
"nosupportneeded",
"eldritchhorror",
"3dsculpture",
"thecallofcthulhu",
"nosupports",
"arkhamhorror",
"sculpting"
] | Art & Design > Sculptures | [
"32846/images/cthulhu5.jpg",
"32846/images/cthulhu1.jpg",
"32846/images/cthulhu3.jpg",
"32846/images/cthulhu4.jpg",
"32846/images/cthulhu2.jpg",
"32846/images/101390714_3325706317461228_5792910534755359241_n.jpg",
"32846/images/102301984_697359921054378_2276774146983921844_n.jpg",
"32846/images/101793... | [
"32846/gcode/kajtek_k_cthulhu__v0.gcode",
"32846/gcode/kajtek_k_cthulhu__v1.gcode",
"32846/gcode/kajtek_k_cthulhu__v2.gcode",
"32846/gcode/kajtek_k_cthulhu__v3.gcode",
"32846/gcode/kajtek_k_cthulhu__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/32846 | gcodes_0561.tar |
32289 | CNC 3018 X and Y axis knob (knurled surface) | <p>This is hand wheels knob for CNC 3018 X and Z axis (diameter 8 mm). Printed grey looks very nice on machine.</p>
<p>Knob radius is 24 mm and thickness is 10 mm. It is meant to be used on 8 mm lead screw so it has 8.1 mm hole which is big enough that knob tightly sits on leading screw so it can easily turn leading sc... | [
"knob",
"screw",
"cnc",
"xaxis",
"3018",
"axis",
"yaxis",
"cnc3018",
"leadingscrew"
] | Hobby & Makers > Mechanical Parts | [
"32289/images/y-axis-knob.jpg",
"32289/images/x-axis-knob.jpg"
] | [
"32289/gcode/axis-knob-kurling-10x24mm__v0.gcode",
"32289/gcode/axis-knob-kurling-10x24mm__v1.gcode",
"32289/gcode/axis-knob-kurling-10x24mm__v2.gcode",
"32289/gcode/axis-knob-kurling-10x24mm__v3.gcode",
"32289/gcode/axis-knob-kurling-10x24mm__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/32289 | gcodes_0561.tar |
35426 | TP-Link POE Wall Mount | <p>This wall mount is meant for the TP-Link TL-POE150S Injector, used for powering on a device with Power Over Ethernet while not having a compatible network plug available.</p>
<p>For testing purpose I printed this on a layer height of .3mm, however the result will be much better when printed with .10mm or .20mm layer... | [
"wall",
"mount",
"wallmount",
"thingiverse"
] | Household > Other House Equipment | [
"35426/images/large_display_img_1560_35426.jpg",
"35426/images/large_display_img_1557_35426.jpg",
"35426/images/large_display_img_1558_35426.jpg",
"35426/images/large_display_img_1555_35426.jpg",
"35426/images/large_display_img_1543_35426.jpg",
"35426/images/large_display_img_1544_35426.jpg",
"35426/ima... | [
"35426/gcode/tplink_poe_wall_mount__v0.gcode",
"35426/gcode/tplink_poe_wall_mount__v1.gcode",
"35426/gcode/tplink_poe_wall_mount__v2.gcode",
"35426/gcode/tplink_poe_wall_mount__v3.gcode",
"35426/gcode/tplink_poe_wall_mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35426 | gcodes_0561.tar |
35375 | Apple Pencil Charging Dock | <p>I dislike clutter on my desk, so I made an Apple Pencil charging dock that attaches to the side of my monitor with 3M command strips [Large, see link below].</p>
<p>The dock sticks to a wall or any other surface and provides an organized way to store and charge the Apple Pencil, the cap, and the adapter. Your cap si... | [
"stand",
"wallmount",
"dock",
"charging",
"apple",
"monitor",
"chargingdock",
"wallmounted",
"thingiverse",
"chargingstation",
"chargingstand",
"monitormount",
"3mcommandstrips",
"3mcommand",
"applepencil",
"applepencilcap",
"applepencilholder",
"applepencilstand"
] | Gadgets > Other Gadgets | [
"35375/images/5edcb6c95ab8af61f0c69a4cbae3d8ca_display_large_3.jpg",
"35375/images/6eac5ff89da0d670091a15d33aca8348_display_large_3.jpg",
"35375/images/capture_35375.jpg",
"35375/images/9b116b77cb2adafe3906d90aef468c65_display_large_35.jpg",
"35375/images/f6a37c342c95a01b1d715a4be6d35f96_display_large_35.jp... | [
"35375/gcode/pencil_dock__v0.gcode",
"35375/gcode/pencil_dock__v1.gcode",
"35375/gcode/pencil_dock__v2.gcode",
"35375/gcode/pencil_dock__v3.gcode",
"35375/gcode/pencil_dock__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35375 | gcodes_0561.tar |
35496 | Inch cap for cubic tank | <p>this cap reduce tank thread to 1inch pipe thread for valve</p>
<h3>Print instructions</h3><p>If you want to print the cap without our website, you can just put the .stl into the slicer, but when you print it with our website, you must split it in mmu mode...</p> | [] | Household > Outdoor & Garden | [
"35496/images/98a8f59f-c3ea-4164-b2cc-a442b003c0f6.jpg",
"35496/images/cap.jpg"
] | [
"35496/gcode/cap__v0.gcode",
"35496/gcode/cap__v1.gcode",
"35496/gcode/cap__v2.gcode",
"35496/gcode/cap__v3.gcode",
"35496/gcode/cap__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/35496 | gcodes_0561.tar |
35354 | Zero Motorcycles Zero S Swingarm Frame Tube Cap | <p>This is a Frame Tube Cap the Zero Motorcycles Zero S Motorcycle.<br/>
You can use it to store things in the swingarm frame tube.<br/>
I printed it in TPU and stored my warning west in the tube. :)</p>
<p>It is a very snug fit with my Prusa MK3S, so maybe first print only one and see how it fits on your bike.</p>
<... | [
"thingiverse"
] | Hobby & Makers > Automotive | [
"35354/images/large_display_swingarm_frame_tube_cap_35354.jpg",
"35354/images/large_display_20-05-12_16-48-42_8436_35354.jpg"
] | [
"35354/gcode/swingarm_frame_tube_cap__v0.gcode",
"35354/gcode/swingarm_frame_tube_cap__v1.gcode",
"35354/gcode/swingarm_frame_tube_cap__v2.gcode",
"35354/gcode/swingarm_frame_tube_cap__v3.gcode",
"35354/gcode/swingarm_frame_tube_cap__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35354 | gcodes_0561.tar |
35176 | VESA Adapter for 30 inch Apple Cinema HD Display | <p>An adapter plate for the Apple Cinema Display (30 inch).</p>
<p>This is so you can use one of these old chunky monitors on a more useful stand!</p>
<p>You'll need to remove the stand that comes with the monitor, and save those two fancy looking screws on the side. You'll also need four M4 nuts to use in the screw ho... | [
"display",
"bracket",
"apple",
"adapter",
"screen",
"thingiverse",
"macintosh",
"vesa",
"cinema"
] | Gadgets > Computers | [
"35176/images/large_display_vesa_adapter_v2_35176.jpg"
] | [
"35176/gcode/vesa_adapter_v2__v0.gcode",
"35176/gcode/vesa_adapter_v2__v1.gcode",
"35176/gcode/vesa_adapter_v2__v2.gcode",
"35176/gcode/vesa_adapter_v2__v3.gcode",
"35176/gcode/vesa_adapter_v2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35176 | gcodes_0561.tar |
35160 | Corner-Mounted Shaver Holder | <p>Designed to mount in a corner with two 3M Command strips, this holder should fit a typical electric shaver. IT may fit yours, it may not, but print it (or measure it) and find out!</p>
<h3>Print instructions</h3><h3>Category: Bathroom Summary</h3>
<p>Designed to mount in a corner with two 3M Command strips, this hol... | [
"holder",
"corner",
"thingiverse",
"3mcommandstrips",
"electricshaver"
] | Household > Bathroom | [
"35160/images/9dedff064a025c3c28d3f014d9db52cd_display_large_35.jpg",
"35160/images/95b958f80879e389e2330b9de7093ac4_display_large_35.jpg"
] | [
"35160/gcode/shaver_holder__v0.gcode",
"35160/gcode/shaver_holder__v1.gcode",
"35160/gcode/shaver_holder__v2.gcode",
"35160/gcode/shaver_holder__v3.gcode",
"35160/gcode/shaver_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35160 | gcodes_0561.tar |
35138 | FTM-400 desktop stand | <p>Yaesu FTM-400 desktop stand</p>
<h3>Print instructions</h3><p>Unassociated tags: ftm 400, ham radio</p>
<h3>Category: Electronics Summary</h3>
<p>Yaesu FTM-400 desktop stand</p> | [
"thingiverse",
"yaesu",
"amateurfunk"
] | Hobby & Makers > Electronics | [
"35138/images/6486e463eae24f5472b3bfd2dc7b413e_display_large_35.jpg"
] | [
"35138/gcode/ftm400_stand__v0.gcode",
"35138/gcode/ftm400_stand__v1.gcode",
"35138/gcode/ftm400_stand__v2.gcode",
"35138/gcode/ftm400_stand__v3.gcode",
"35138/gcode/ftm400_stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35138 | gcodes_0561.tar |
35265 | Prusa Sized Artichoke Lamp Shade | <p>I like the design, but since my Prusa i3 MK2 has a max build height of 20cm I had to re-scale it a little. Since making it smaller would have also made the hole for the light socket too small that had to change too.</p>
<h3>Print instructions</h3><h3>Category: Decor Summary</h3>
<p>I like the design, but since my Pr... | [
"lampshade",
"thingiverse"
] | Household > Home Decor | [
"35265/images/e34e5341ada4ee0fc466068fb026b9d9_display_large_35.jpg"
] | [
"35265/gcode/artichokelampshade__v0.gcode",
"35265/gcode/artichokelampshade__v1.gcode",
"35265/gcode/artichokelampshade__v2.gcode",
"35265/gcode/artichokelampshade__v3.gcode",
"35265/gcode/artichokelampshade__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35265 | gcodes_0561.tar |
35018 | Microscope Stand Upgrade | <p>An upgraded stand for this popular and inexpensive USB microscope (Jiusion 1000x and similar).</p>
<p>The clamp that comes in in the kit it's way too flexible, making it really hard to focus. This upgrade uses a simple trick to hold the microscope steadier: the clamp itself gets tightened by the same screw mechanism... | [
"camera",
"stand",
"bracket",
"clamp",
"macro",
"endoscope",
"thingiverse",
"microscope",
"zoom",
"magnification",
"jiusion"
] | Hobby & Makers > Electronics | [
"35018/images/f7c472bd094bfd2f5498c11a586da785_display_large_35.jpg",
"35018/images/4341d42443cbed87ee0a1e9f85d8c34f_display_large_35.jpg",
"35018/images/d92debd768234dcdbb1b077844122e4b_display_large_35.jpg",
"35018/images/2b1b8ad7bbab2f43f5b4ac8fab9b5d60_display_large_35.jpg"
] | [
"35018/gcode/microscope__v0.gcode",
"35018/gcode/microscope__v1.gcode",
"35018/gcode/microscope__v2.gcode",
"35018/gcode/microscope__v3.gcode",
"35018/gcode/microscope__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35018 | gcodes_0561.tar |
33457 | Logitec C270 articulated arm to Ender 3 adapter | <p>This adapter connects an articulated arm, which holds a C270 webcam, to the frame of an Ender 3 Pro with the help of two T-nuts and two M3x10 screws.</p>
<p>Just print this adapter, and mount it to the left rail of your Ender 3 with two of these T-nuts:<br/>
<a href="https://www.thingiverse.com/thing:3050607">https:... | [
"logitechc270",
"ender3",
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"33457/images/large_display_complete_camera_arm_on_ender_33457.jpg",
"33457/images/large_display_camera_arm_adapter_mounted_on_ender.jpg",
"33457/images/large_display_adapter_with_t-nuts_33457.jpg",
"33457/images/large_display_articulated_arm_to_ender_3_adapter_.jpg"
] | [
"33457/gcode/articulated_arm_to_ender_3_adapter__v0.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v1.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v2.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v3.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33457 | gcodes_0561.tar |
33451 | Prusa i3 Mk3S extruder indicator | <p>This little extruder indicator was inspired by others with a similar design. They did not fully meet my needs, so I made my own.</p>
<p>My design specification included:</p>
<ul>
<li>indication needs to be unique over a 360° range, i.e. no repetitive pattern (which is really helpful if you watch via a camera live st... | [
"extruder",
"thingiverse"
] | 3D Printers > Prusa Parts & Upgrades | [
"33451/images/large_display_extruder_indicator_photo_33451.jpg",
"33451/images/large_display_bildschirmfoto_vom_2020-02-28_21-45.jpg",
"33451/images/large_display_extruder_indicator_33451.jpg"
] | [
"33451/gcode/extruder_indicator__v0.gcode",
"33451/gcode/extruder_indicator__v1.gcode",
"33451/gcode/extruder_indicator__v2.gcode",
"33451/gcode/extruder_indicator__v3.gcode",
"33451/gcode/extruder_indicator__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33451 | gcodes_0561.tar |
33405 | Arduino MKR series simple stand | <p>The new arduino form factor has long thin pins that are protected by a conductive foam inside of the box. This is a simple stand that covers and protect those pins.</p>
<h3>Print instructions</h3><h3>Category: Electronics Summary</h3>
<p>The new arduino form factor has long thin pins that are protected by a conducti... | [
"stand",
"arduino",
"arduinocase",
"thingiverse",
"mkr",
"mkr1000",
"mkr1500"
] | Hobby & Makers > Electronics | [
"33405/images/df0ef6aa88bdca77df722214f493878c_display_large_33.jpg",
"33405/images/cb18ac913b4e0d3942ed453208b3df1b_display_large_33.jpg",
"33405/images/32c567325611430dfcb6927542620324_display_large_33.jpg",
"33405/images/624781954fd5845171f868fdb26d3af2_display_large_33.jpg"
] | [
"33405/gcode/stand__v0.gcode",
"33405/gcode/stand__v1.gcode",
"33405/gcode/stand__v2.gcode",
"33405/gcode/stand__v3.gcode",
"33405/gcode/stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33405 | gcodes_0561.tar |
35113 | Coin Holder for Swiss franc (CHF) | <p>Coin Holder for Swiss franc (CHF) to keep my change sorted. I've added 0.5mm tolerance to the coin diameter. Coins can't fall out at the front.</p>
<h3>Print instructions</h3><p>Filament: PETG<br/>
Color: Galaxy Black<br/>
Temps: 235°C / 85°C (first layer and the rest)<br/>
Layer height: 0.2mm (first layer and the r... | [
"holder",
"coin",
"stand"
] | Hobby & Makers > Organizers | [
"35113/images/img_20200622_083038.jpg",
"35113/images/img_20200621_230024.jpg"
] | [
"35113/gcode/coin_holder__v0.gcode",
"35113/gcode/coin_holder__v1.gcode",
"35113/gcode/coin_holder__v2.gcode",
"35113/gcode/coin_holder__v3.gcode",
"35113/gcode/coin_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35113 | gcodes_0561.tar |
32782 | Soporte para móvil o tablet | <p>Soporte para móvil o tablet</p>
| [] | 3D Printers > Accessories | [
"32782/images/soporte-movil-o-tablets-kenybuey-2.jpg",
"32782/images/soporte-movil-o-tablets-kenybuey.jpg"
] | [
"32782/gcode/soporte-movil-tablet-kenybuey__v0.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v1.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v2.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v3.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/32782 | gcodes_0561.tar |
32846 | Cthulhu!! | <p>This model is designed to be printed on FDM without need for any supports.<br/>
On the photos you can see it printed in PLA, using 0.8mm diameter nozzle, in 500% (~10cm) and 1000% (~20cm) scale.<br/>
made using BLENDER 2.81</p>
<p>link to render:</p>
<p>
<figure class="media">
<oembed url="https://youtu.be/_D6ukogLY... | [
"mini",
"monster",
"horror",
"fantasy",
"sculpt",
"sculpture",
"lovecraft",
"monsters",
"cthulhu",
"miniatures",
"contest",
"nosupport",
"nosupportneeded",
"eldritchhorror",
"3dsculpture",
"thecallofcthulhu",
"nosupports",
"arkhamhorror",
"sculpting"
] | Art & Design > Sculptures | [
"32846/images/cthulhu5.jpg",
"32846/images/cthulhu1.jpg",
"32846/images/cthulhu3.jpg",
"32846/images/cthulhu4.jpg",
"32846/images/cthulhu2.jpg",
"32846/images/101390714_3325706317461228_5792910534755359241_n.jpg",
"32846/images/102301984_697359921054378_2276774146983921844_n.jpg",
"32846/images/101793... | [
"32846/gcode/kajtek_k_cthulhu__v0.gcode",
"32846/gcode/kajtek_k_cthulhu__v1.gcode",
"32846/gcode/kajtek_k_cthulhu__v2.gcode",
"32846/gcode/kajtek_k_cthulhu__v3.gcode",
"32846/gcode/kajtek_k_cthulhu__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/32846 | gcodes_0561.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.