model_id stringlengths 1 7 | name stringlengths 1 169 | description stringlengths 0 38.2k | tags listlengths 0 284 | printables_category stringclasses 76
values | image_paths listlengths 0 62 | gcode_paths listlengths 1 10 | license stringclasses 8
values | source stringlengths 34 40 | shard_file stringclasses 595
values |
|---|---|---|---|---|---|---|---|---|---|
33457 | Logitec C270 articulated arm to Ender 3 adapter | <p>This adapter connects an articulated arm, which holds a C270 webcam, to the frame of an Ender 3 Pro with the help of two T-nuts and two M3x10 screws.</p>
<p>Just print this adapter, and mount it to the left rail of your Ender 3 with two of these T-nuts:<br/>
<a href="https://www.thingiverse.com/thing:3050607">https:... | [
"logitechc270",
"ender3",
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"33457/images/large_display_complete_camera_arm_on_ender_33457.jpg",
"33457/images/large_display_camera_arm_adapter_mounted_on_ender.jpg",
"33457/images/large_display_adapter_with_t-nuts_33457.jpg",
"33457/images/large_display_articulated_arm_to_ender_3_adapter_.jpg"
] | [
"33457/gcode/articulated_arm_to_ender_3_adapter__v0.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v1.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v2.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v3.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33457 | gcodes_0564.tar |
33451 | Prusa i3 Mk3S extruder indicator | <p>This little extruder indicator was inspired by others with a similar design. They did not fully meet my needs, so I made my own.</p>
<p>My design specification included:</p>
<ul>
<li>indication needs to be unique over a 360° range, i.e. no repetitive pattern (which is really helpful if you watch via a camera live st... | [
"extruder",
"thingiverse"
] | 3D Printers > Prusa Parts & Upgrades | [
"33451/images/large_display_extruder_indicator_photo_33451.jpg",
"33451/images/large_display_bildschirmfoto_vom_2020-02-28_21-45.jpg",
"33451/images/large_display_extruder_indicator_33451.jpg"
] | [
"33451/gcode/extruder_indicator__v0.gcode",
"33451/gcode/extruder_indicator__v1.gcode",
"33451/gcode/extruder_indicator__v2.gcode",
"33451/gcode/extruder_indicator__v3.gcode",
"33451/gcode/extruder_indicator__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33451 | gcodes_0564.tar |
33405 | Arduino MKR series simple stand | <p>The new arduino form factor has long thin pins that are protected by a conductive foam inside of the box. This is a simple stand that covers and protect those pins.</p>
<h3>Print instructions</h3><h3>Category: Electronics Summary</h3>
<p>The new arduino form factor has long thin pins that are protected by a conducti... | [
"stand",
"arduino",
"arduinocase",
"thingiverse",
"mkr",
"mkr1000",
"mkr1500"
] | Hobby & Makers > Electronics | [
"33405/images/df0ef6aa88bdca77df722214f493878c_display_large_33.jpg",
"33405/images/cb18ac913b4e0d3942ed453208b3df1b_display_large_33.jpg",
"33405/images/32c567325611430dfcb6927542620324_display_large_33.jpg",
"33405/images/624781954fd5845171f868fdb26d3af2_display_large_33.jpg"
] | [
"33405/gcode/stand__v0.gcode",
"33405/gcode/stand__v1.gcode",
"33405/gcode/stand__v2.gcode",
"33405/gcode/stand__v3.gcode",
"33405/gcode/stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33405 | gcodes_0564.tar |
35113 | Coin Holder for Swiss franc (CHF) | <p>Coin Holder for Swiss franc (CHF) to keep my change sorted. I've added 0.5mm tolerance to the coin diameter. Coins can't fall out at the front.</p>
<h3>Print instructions</h3><p>Filament: PETG<br/>
Color: Galaxy Black<br/>
Temps: 235°C / 85°C (first layer and the rest)<br/>
Layer height: 0.2mm (first layer and the r... | [
"holder",
"coin",
"stand"
] | Hobby & Makers > Organizers | [
"35113/images/img_20200622_083038.jpg",
"35113/images/img_20200621_230024.jpg"
] | [
"35113/gcode/coin_holder__v0.gcode",
"35113/gcode/coin_holder__v1.gcode",
"35113/gcode/coin_holder__v2.gcode",
"35113/gcode/coin_holder__v3.gcode",
"35113/gcode/coin_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35113 | gcodes_0564.tar |
32782 | Soporte para móvil o tablet | <p>Soporte para móvil o tablet</p>
| [] | 3D Printers > Accessories | [
"32782/images/soporte-movil-o-tablets-kenybuey-2.jpg",
"32782/images/soporte-movil-o-tablets-kenybuey.jpg"
] | [
"32782/gcode/soporte-movil-tablet-kenybuey__v0.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v1.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v2.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v3.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/32782 | gcodes_0564.tar |
32846 | Cthulhu!! | <p>This model is designed to be printed on FDM without need for any supports.<br/>
On the photos you can see it printed in PLA, using 0.8mm diameter nozzle, in 500% (~10cm) and 1000% (~20cm) scale.<br/>
made using BLENDER 2.81</p>
<p>link to render:</p>
<p>
<figure class="media">
<oembed url="https://youtu.be/_D6ukogLY... | [
"mini",
"monster",
"horror",
"fantasy",
"sculpt",
"sculpture",
"lovecraft",
"monsters",
"cthulhu",
"miniatures",
"contest",
"nosupport",
"nosupportneeded",
"eldritchhorror",
"3dsculpture",
"thecallofcthulhu",
"nosupports",
"arkhamhorror",
"sculpting"
] | Art & Design > Sculptures | [
"32846/images/cthulhu5.jpg",
"32846/images/cthulhu1.jpg",
"32846/images/cthulhu3.jpg",
"32846/images/cthulhu4.jpg",
"32846/images/cthulhu2.jpg",
"32846/images/101390714_3325706317461228_5792910534755359241_n.jpg",
"32846/images/102301984_697359921054378_2276774146983921844_n.jpg",
"32846/images/101793... | [
"32846/gcode/kajtek_k_cthulhu__v0.gcode",
"32846/gcode/kajtek_k_cthulhu__v1.gcode",
"32846/gcode/kajtek_k_cthulhu__v2.gcode",
"32846/gcode/kajtek_k_cthulhu__v3.gcode",
"32846/gcode/kajtek_k_cthulhu__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/32846 | gcodes_0564.tar |
32275 | Schäufelchen | <p>Ist für Gewürze gedacht</p>
<h3>Print instructions</h3><p>PLA</p> | [] | Household > Kitchen | [
"32275/images/schaufelchen.jpg"
] | [
"32275/gcode/schaeufelchen-v1__v0.gcode",
"32275/gcode/schaeufelchen-v1__v1.gcode",
"32275/gcode/schaeufelchen-v1__v2.gcode",
"32275/gcode/schaeufelchen-v1__v3.gcode",
"32275/gcode/schaeufelchen-v1__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/32275 | gcodes_0564.tar |
32289 | CNC 3018 X and Y axis knob (knurled surface) | <p>This is hand wheels knob for CNC 3018 X and Z axis (diameter 8 mm). Printed grey looks very nice on machine.</p>
<p>Knob radius is 24 mm and thickness is 10 mm. It is meant to be used on 8 mm lead screw so it has 8.1 mm hole which is big enough that knob tightly sits on leading screw so it can easily turn leading sc... | [
"knob",
"screw",
"cnc",
"xaxis",
"3018",
"axis",
"yaxis",
"cnc3018",
"leadingscrew"
] | Hobby & Makers > Mechanical Parts | [
"32289/images/y-axis-knob.jpg",
"32289/images/x-axis-knob.jpg"
] | [
"32289/gcode/axis-knob-kurling-10x24mm__v0.gcode",
"32289/gcode/axis-knob-kurling-10x24mm__v1.gcode",
"32289/gcode/axis-knob-kurling-10x24mm__v2.gcode",
"32289/gcode/axis-knob-kurling-10x24mm__v3.gcode",
"32289/gcode/axis-knob-kurling-10x24mm__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/32289 | gcodes_0564.tar |
32192 | Flag Pole Swivel Ring with Clip and Set Screw | <p>This is the flag clip, an M10 set screw, and the lower swivel ring for a 25mm diameter flag pole. The Fusion 360 source file is included if you want to make changes. The 3MF file is included with the print settings that worked for me on my Prusa i3 Mk3s</p> | [
"clip",
"ring",
"flags",
"flag",
"swivel",
"flagpole"
] | Household > Outdoor & Garden | [
"32192/images/img_3541.jpg",
"32192/images/img_3542.jpg",
"32192/images/img_3543.jpg",
"32192/images/img_3547.jpg"
] | [
"32192/gcode/flag_pole_ring__v0.gcode",
"32192/gcode/flag_pole_ring__v1.gcode",
"32192/gcode/flag_pole_ring__v2.gcode",
"32192/gcode/flag_pole_ring__v3.gcode",
"32192/gcode/flag_pole_ring__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/32192 | gcodes_0564.tar |
32174 | DeWALT Miter Saw Replacement Clamp For heavy duty Stand | <p>DeWALT has a awesome heavy duty miter saw stand (link below) that is fairly easy to use as there are two clamps on the bottom of the miter saw that clip on too the stand. When somebody dropped the miter saw one of the black clamps on the bottom broke. When contacted, DeWALT said there was no replacement parts for sa... | [
"dewalt",
"replacementpart",
"mitersaw"
] | Hobby & Makers > Tools | [
"32174/images/61195762072__8859aa8e-8187-4874-94ff-8b9a79785f5c.jpg",
"32174/images/img_2980.jpg",
"32174/images/img_2981.jpg",
"32174/images/img_2979.jpg",
"32174/images/61185938655__25da6455-5299-405b-ac0f-9b0eab7c3d9b.jpg"
] | [
"32174/gcode/dewalt-miter-saw-clamp-v1__v0.gcode",
"32174/gcode/dewalt-miter-saw-clamp-v1__v1.gcode",
"32174/gcode/dewalt-miter-saw-clamp-v1__v2.gcode",
"32174/gcode/dewalt-miter-saw-clamp-v1__v3.gcode",
"32174/gcode/dewalt-miter-saw-clamp-v1__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/32174 | gcodes_0564.tar |
27740 | Simple Extruder Visualizer | <p>Very simple visualizer. Built to house a 6mm x 6mm cylindrical magnet.</p>
<p>f3d file included if you want to modify it for a bigger/different magnet.</p>
<h3>Print instructions</h3><p>I printed with the inlay down, no supports, 0.2mm layer height.</p> | [
"visualizer",
"visualiser",
"minimal",
"simple",
"extrudervisualizer"
] | 3D Printers > Other Printer Parts & Upgrades | [
"27740/images/20200329_185631.jpg"
] | [
"27740/gcode/visualizer__v0.gcode",
"27740/gcode/visualizer__v1.gcode",
"27740/gcode/visualizer__v2.gcode",
"27740/gcode/visualizer__v3.gcode",
"27740/gcode/visualizer__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/27740 | gcodes_0564.tar |
32238 | Angel Candle Holder | <p>An ideal ornament for Christmas or any time.<br/>
It is a remix from Thingiverse #369594<br/>
Cut a 1/2" hole in "back pack"</p>
<h3>Print instructions</h3><p>SunLu Shiny Silver PLA, but printed at 250 Nozzle/90 Bed<br/>
Need support from bed, but no rafters.<br/>
NOTE: This can be melted by candle droppings or from... | [
"candle",
"angel",
"christmasornaments"
] | Art & Design > Sculptures | [
"32238/images/img_0016.jpg"
] | [
"32238/gcode/angelcandleholder__v0.gcode",
"32238/gcode/angelcandleholder__v1.gcode",
"32238/gcode/angelcandleholder__v2.gcode",
"32238/gcode/angelcandleholder__v3.gcode",
"32238/gcode/angelcandleholder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/32238 | gcodes_0564.tar |
26842 | Safety Razor Disposal Box | <p>Holds plenty of discarded blades and snaps shut when you're ready to discard it</p>
| [
"safetyrazor",
"healthandsafety"
] | Household > Bathroom | [
"26842/images/screenshot-7.jpg",
"26842/images/img_1833.jpg",
"26842/images/img_1834.jpg"
] | [
"26842/gcode/razor-holder-v1__v0.gcode",
"26842/gcode/razor-holder-v1__v1.gcode",
"26842/gcode/razor-holder-v1__v2.gcode",
"26842/gcode/razor-holder-v1__v3.gcode",
"26842/gcode/razor-holder-v1__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/26842 | gcodes_0564.tar |
26807 | Alcohol And Cleaner Pads Holder | <p>This is an Alcohol and makeup cleaning pads holder organizer...</p>
<h3>Print instructions</h3><p>This is an Alcohol and Makeup cleaning pads organizer for cleaning the build surface on the 3D Printer. The makeup cleaning pads works good and you can reuse them a few times before you have to throw them away. It also ... | [
"organizer",
"3dprinter",
"printercleaning",
"hotbedcleaner"
] | Hobby & Makers > Organizers | [
"26807/images/20200324_144228.jpg"
] | [
"26807/gcode/alcohol-and-pads-holder__v0.gcode",
"26807/gcode/alcohol-and-pads-holder__v1.gcode",
"26807/gcode/alcohol-and-pads-holder__v2.gcode",
"26807/gcode/alcohol-and-pads-holder__v3.gcode",
"26807/gcode/alcohol-and-pads-holder__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/26807 | gcodes_0564.tar |
26704 | Foot Door Opener | <p>You can open the door (toilet door) with your foot, avoiding getting germ and virus on the door handle.</p>
| [
"opener",
"door",
"virus",
"everydaylifenecessities",
"convid19"
] | Household > Bathroom | [
"26704/images/footdooropener.jpg"
] | [
"26704/gcode/footdooropener-v1__v0.gcode",
"26704/gcode/footdooropener-v1__v1.gcode",
"26704/gcode/footdooropener-v1__v2.gcode",
"26704/gcode/footdooropener-v1__v3.gcode",
"26704/gcode/footdooropener-v1__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/26704 | gcodes_0564.tar |
26379 | E3Dv6 Nozzle Storage Block | <p>A minimalistic block to store E3D v6 Nozzles without any frills like markings, lids or decoration.</p>
<p>Fits a total of 16 nozzles with just enough space to screw them in & out.</p>
<p>Find the original design files at <a href="https://a360.co/33H5VAG">https://a360.co/33H5VAG</a></p>
| [
"nozzle",
"nozzles",
"nozzleholder",
"e3dv6",
"nozzleboard"
] | 3D Printers > Accessories | [
"26379/images/img_20200322_143343.jpg"
] | [
"26379/gcode/e3d-nozzle-block-v3__v0.gcode",
"26379/gcode/e3d-nozzle-block-v3__v1.gcode",
"26379/gcode/e3d-nozzle-block-v3__v2.gcode",
"26379/gcode/e3d-nozzle-block-v3__v3.gcode",
"26379/gcode/e3d-nozzle-block-v3__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/26379 | gcodes_0564.tar |
26189 | Glove Remover RC1 | <p>This is a glove remover designed to allow you to take off your glove instead of touching it with your clean hand. Use these devices with your clean hand to allow you to not touch the dirty glove.</p> | [] | Healthcare > Medical Tools | [
"26189/images/img_0967.jpg",
"26189/images/img_2836.jpg",
"26189/images/img_0975.jpg",
"26189/images/img_2835.jpg"
] | [
"26189/gcode/glove-remover-rc1__v0.gcode",
"26189/gcode/glove-remover-rc1__v1.gcode",
"26189/gcode/glove-remover-rc1__v2.gcode",
"26189/gcode/glove-remover-rc1__v3.gcode",
"26189/gcode/glove-remover-rc1__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/26189 | gcodes_0564.tar |
25731 | Filament Guide For Prusa Printers | <p>Simply put, this is a filament guide for Prusa Printers, specifically for using large rolls of filament that cannot sit on top of the printer.</p>
<p>Most of the prints I design are generally on the larger side, but this is one of the few exceptions. However, it solves an issue I had for a large project that I am w... | [
"filamentguide"
] | 3D Printers > Prusa Parts & Upgrades | [
"25731/images/filamentguidev1r.jpg",
"25731/images/guide.jpg",
"25731/images/mk3sfilamentguidev1.jpg"
] | [
"25731/gcode/mk3sfilamentguidev1__v0.gcode",
"25731/gcode/mk3sfilamentguidev1__v1.gcode",
"25731/gcode/mk3sfilamentguidev1__v2.gcode",
"25731/gcode/mk3sfilamentguidev1__v3.gcode",
"25731/gcode/mk3sfilamentguidev1__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/25731 | gcodes_0564.tar |
25752 | Hand held citrus / lemon /orange squeezer | <p>A simpel hand held citrus squeezer.</p>
<p>You can adjust for what purpuso you want to use it, by adjusting the scale in X and Y direction (and leave Z direction the same)</p>
<p>No supports needed,</p>
<p>Don't clean in dishwasher when you use PLA and high temperature wash;)</p>
<p>Printed by <a href="https://www.m... | [
"hand",
"orange",
"squeezer",
"thingiverse",
"citrus",
"lemon",
"lime",
"reamer"
] | Household > Kitchen | [
"25752/images/191_25752.jpg",
"25752/images/f775ff016e1e894e7da09e8941f14fbc_display_large_25.jpg"
] | [
"25752/gcode/citrus_reamer_v1-1_solid__v0.gcode",
"25752/gcode/citrus_reamer_v1-1_solid__v1.gcode",
"25752/gcode/citrus_reamer_v1-1_solid__v2.gcode",
"25752/gcode/citrus_reamer_v1-1_solid__v3.gcode",
"25752/gcode/citrus_reamer_v1-1_solid__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/25752 | gcodes_0564.tar |
25716 | Shower Holder | <p>I was searching for a small solution to put the hand shower on the wall, but there was nothing. So I constructed my own version.</p>
<p>OpenSCAD File is also included</p>
<h3>Print instructions</h3><p>Printed with 3DJake PETG with ultradetail to get a nice surface since the mainpart is aslant.</p> | [] | Household > Bathroom | [
"25716/images/img_20200317_091757.jpg"
] | [
"25716/gcode/brausehalterung-v1__v0.gcode",
"25716/gcode/brausehalterung-v1__v1.gcode",
"25716/gcode/brausehalterung-v1__v2.gcode",
"25716/gcode/brausehalterung-v1__v3.gcode",
"25716/gcode/brausehalterung-v1__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/25716 | gcodes_0564.tar |
25592 | DJI Mavic Mini range extender | <p>Simple parabolic signal booster. Stick any aluminum foil inside.</p>
<h3>Print instructions</h3><p>Print it with a 5mm brim, left or right side down. You need two pieces.</p> | [] | Gadgets > Other Gadgets | [
"25592/images/extender.jpg"
] | [
"25592/gcode/extender1_1__v0.gcode",
"25592/gcode/extender1_1__v1.gcode",
"25592/gcode/extender1_1__v2.gcode",
"25592/gcode/extender1_1__v3.gcode",
"25592/gcode/extender1_1__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/25592 | gcodes_0564.tar |
25573 | Extruder Dust Filter - Prusa I3MK3S | <p><strong>THE PLUS VERSION (i3mk3s+)</strong></p><p>HERE: https://www.printables.com/cs/model/165818-extruder-dust-filter-prusa-i3mk3s</p><p>.20<br>15%</p><h3>Print instructions</h3><p>Category: 3D Printer Parts</p> | [
"thingiverse"
] | 3D Printers > Prusa Parts & Upgrades | [
"25573/images/extruder-dust-filter-3_25573.jpg",
"25573/images/large_display_extruder-dust-filter_25573.jpg",
"25573/images/extruder-dust-filter-1_25573.jpg",
"25573/images/extruder-dust-filter-2_25573.jpg"
] | [
"25573/gcode/extruder-dust-filter__v0.gcode",
"25573/gcode/extruder-dust-filter__v1.gcode",
"25573/gcode/extruder-dust-filter__v2.gcode",
"25573/gcode/extruder-dust-filter__v3.gcode",
"25573/gcode/extruder-dust-filter__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/25573 | gcodes_0564.tar |
25559 | Node 202 - Customizable cpu fan duct for Noctua NH-L9i cooler | <p>This is a remix of <a href="https://www.thingiverse.com/thing:4057643">https://www.thingiverse.com/thing:4057643</a> ( <a href="https://www.reddit.com/r/sffpc/comments/ecl6fu/node_202_build_with_cpu_fan_duct_mod_resulting_in/">original reddit post</a> )</p>
<p>I remade it with OpenSCAD to allow customization, by mod... | [
"thingiverse"
] | Gadgets > Computers | [
"25559/images/duct_25559.jpg",
"25559/images/fits_25559.jpg"
] | [
"25559/gcode/nodecpuduct__v0.gcode",
"25559/gcode/nodecpuduct__v1.gcode",
"25559/gcode/nodecpuduct__v2.gcode",
"25559/gcode/nodecpuduct__v3.gcode",
"25559/gcode/nodecpuduct__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/25559 | gcodes_0564.tar |
25548 | Slim Graupner GR-12 stack mount | <p>Slim mount for a GR-12<br/>
Remove the case and click into the printed mount.</p>
| [
"receiver",
"thingiverse",
"fpvracer",
"graupner"
] | Hobby & Makers > RC & Robotics | [
"25548/images/20170812_130700_25548.jpg",
"25548/images/fb215740398d3049337890c156d727da_display_large_25.jpg"
] | [
"25548/gcode/gr12_stack__v0.gcode",
"25548/gcode/gr12_stack__v1.gcode",
"25548/gcode/gr12_stack__v2.gcode",
"25548/gcode/gr12_stack__v3.gcode",
"25548/gcode/gr12_stack__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/25548 | gcodes_0564.tar |
25412 | LILLNAGGEN pane holder | <p>adjust "scheibe" for the thickness of your pane</p>
<h3>Print instructions</h3><p>Category: Bathroom</p> | [
"ikea",
"holder",
"glass",
"thingiverse",
"halter",
"abzieher",
"glasscheibe",
"lillnaggen",
"pane"
] | Household > Bathroom | [
"25412/images/lillnaggen_25412.jpg",
"25412/images/4703a9894c90232dd23db039ac938605_display_large_25.jpg"
] | [
"25412/gcode/halter-flitsche-8mm__v0.gcode",
"25412/gcode/halter-flitsche-8mm__v1.gcode",
"25412/gcode/halter-flitsche-8mm__v2.gcode",
"25412/gcode/halter-flitsche-8mm__v3.gcode",
"25412/gcode/halter-flitsche-8mm__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/25412 | gcodes_0564.tar |
24815 | Low Poly Torchic with eyes | <p>I took the excellent Torchic model by Fonso_s and added sunken eyes so that it could be printed to match the other low poly pokemon sets</p>
<h3>Print instructions</h3><h3>Category: Creatures Print Settings</h3>
<p><strong>Printer Brand:</strong> Prusa</p>
<p><strong>Printer:</strong> <a href="http://amzn.to/2rqZ6Uo... | [
"pokemon",
"torchic",
"thingiverse"
] | Toys & Games > Action Figures & Statues | [
"24815/images/img_0379_24815.jpg",
"24815/images/43744a34643309e33d4f28162e8eafd7_display_large_24.jpg"
] | [
"24815/gcode/torchic_with_eyes__v0.gcode",
"24815/gcode/torchic_with_eyes__v1.gcode",
"24815/gcode/torchic_with_eyes__v2.gcode",
"24815/gcode/torchic_with_eyes__v3.gcode",
"24815/gcode/torchic_with_eyes__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/24815 | gcodes_0564.tar |
24845 | Clamperl - Pokemon 366 | <p>In honour of Pokemon Go's Clamperl Limited Research Day (February 23rd) I have knocked up a Clamperl one piece model</p>
<p>Probably doesn't need supports!</p>
<h3>Print instructions</h3><p>Category: Creatures</p> | [
"lowpoly",
"pokemon",
"pokemongo",
"thingiverse",
"pokemonfigures",
"clamperl"
] | Toys & Games > Action Figures & Statues | [
"24845/images/bd49a778-986e-4ff0-95ea-3121d80b90ea_24845.jpg",
"24845/images/3d2576375759626b307b541f42223d8d_display_large_24.jpg"
] | [
"24845/gcode/clamperl__v0.gcode",
"24845/gcode/clamperl__v1.gcode",
"24845/gcode/clamperl__v2.gcode",
"24845/gcode/clamperl__v3.gcode",
"24845/gcode/clamperl__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/24845 | gcodes_0564.tar |
24809 | Coke Wrench - Bottle Cap Wrench | <p>This was made for an older acquaintance of mine who has arthritis and finds it difficult to unscrew a Coke plastic bottle cap. These 30mm (~1.18") bottle caps are common, so this wrench should work on other brands as well.</p>
<h3>Print instructions</h3><p>Print top down with</p>
<ul>
<li>perimeters set to 5</li>
<... | [
"wrench",
"twist",
"cap",
"bottlecap",
"bottleopener"
] | Gadgets > Other Gadgets | [
"24809/images/imag1535.jpg",
"24809/images/imag1534.jpg",
"24809/images/coke-wrench-cad.jpg"
] | [
"24809/gcode/cokewrench3__v0.gcode",
"24809/gcode/cokewrench3__v1.gcode",
"24809/gcode/cokewrench3__v2.gcode",
"24809/gcode/cokewrench3__v3.gcode",
"24809/gcode/cokewrench3__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/24809 | gcodes_0564.tar |
24139 | Softsoap Collar Soap Saver | <p>I recently purchased a new Softsoap bottle because the old one was getting seriously gross--even after years of (lots of) cleaning. Lo and behold the corporate scoundrels at Colgate-Palmolive have modified the pump to dispense<strong>way too much soap</strong> (wasting it)! I'm not talking, "a little bit more than b... | [
"kitchen",
"collar",
"bathroom",
"soap",
"saver",
"dispenser",
"thingiverse",
"bathroomaccessories",
"softsoap"
] | Household > Bathroom | [
"24139/images/collar_with_arrow_24139.jpg",
"24139/images/71ae14c1a2ff82ad6ca0fefc6b950f0d_display_large_24.jpg",
"24139/images/before_and_after_24139.jpg"
] | [
"24139/gcode/softsoap_collar_soap_saver__v0.gcode",
"24139/gcode/softsoap_collar_soap_saver__v1.gcode",
"24139/gcode/softsoap_collar_soap_saver__v2.gcode",
"24139/gcode/softsoap_collar_soap_saver__v3.gcode",
"24139/gcode/softsoap_collar_soap_saver__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/24139 | gcodes_0564.tar |
24122 | hook | <p>Se trata de un perchero para colgar facil de imprimir.</p>
<h3>Print instructions</h3><p>infill 20%<br/>
layer 0.20mm<br/>
no supports</p> | [] | Art & Design > Wall-mounted | [
"24122/images/hook.jpg",
"24122/images/img_3475.jpg"
] | [
"24122/gcode/hook__v0.gcode",
"24122/gcode/hook__v1.gcode",
"24122/gcode/hook__v2.gcode",
"24122/gcode/hook__v3.gcode",
"24122/gcode/hook__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/24122 | gcodes_0564.tar |
23929 | New set of grippers for your cutter_1 PRINT | <p>Thanks to original design from 3Deddy, I just put both parts together and positioned to print it easily for me.</p>
<p>original: <a href="https://www.thingiverse.com/thing:3316283">https://www.thingiverse.com/thing:3316283</a></p>
<h3>Print instructions</h3><h3>Category: 3D Printer Accessories Print Settings</h3>
<p... | [
"thingiverse"
] | 3D Printers > Accessories | [
"23929/images/img_3423_23929.jpg",
"23929/images/img_3422_23929.jpg"
] | [
"23929/gcode/grips__v0.gcode",
"23929/gcode/grips__v1.gcode",
"23929/gcode/grips__v2.gcode",
"23929/gcode/grips__v3.gcode",
"23929/gcode/grips__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/23929 | gcodes_0564.tar |
35426 | TP-Link POE Wall Mount | <p>This wall mount is meant for the TP-Link TL-POE150S Injector, used for powering on a device with Power Over Ethernet while not having a compatible network plug available.</p>
<p>For testing purpose I printed this on a layer height of .3mm, however the result will be much better when printed with .10mm or .20mm layer... | [
"wall",
"mount",
"wallmount",
"thingiverse"
] | Household > Other House Equipment | [
"35426/images/large_display_img_1560_35426.jpg",
"35426/images/large_display_img_1557_35426.jpg",
"35426/images/large_display_img_1558_35426.jpg",
"35426/images/large_display_img_1555_35426.jpg",
"35426/images/large_display_img_1543_35426.jpg",
"35426/images/large_display_img_1544_35426.jpg",
"35426/ima... | [
"35426/gcode/tplink_poe_wall_mount__v0.gcode",
"35426/gcode/tplink_poe_wall_mount__v1.gcode",
"35426/gcode/tplink_poe_wall_mount__v2.gcode",
"35426/gcode/tplink_poe_wall_mount__v3.gcode",
"35426/gcode/tplink_poe_wall_mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35426 | gcodes_0564.tar |
35375 | Apple Pencil Charging Dock | <p>I dislike clutter on my desk, so I made an Apple Pencil charging dock that attaches to the side of my monitor with 3M command strips [Large, see link below].</p>
<p>The dock sticks to a wall or any other surface and provides an organized way to store and charge the Apple Pencil, the cap, and the adapter. Your cap si... | [
"stand",
"wallmount",
"dock",
"charging",
"apple",
"monitor",
"chargingdock",
"wallmounted",
"thingiverse",
"chargingstation",
"chargingstand",
"monitormount",
"3mcommandstrips",
"3mcommand",
"applepencil",
"applepencilcap",
"applepencilholder",
"applepencilstand"
] | Gadgets > Other Gadgets | [
"35375/images/5edcb6c95ab8af61f0c69a4cbae3d8ca_display_large_3.jpg",
"35375/images/6eac5ff89da0d670091a15d33aca8348_display_large_3.jpg",
"35375/images/capture_35375.jpg",
"35375/images/9b116b77cb2adafe3906d90aef468c65_display_large_35.jpg",
"35375/images/f6a37c342c95a01b1d715a4be6d35f96_display_large_35.jp... | [
"35375/gcode/pencil_dock__v0.gcode",
"35375/gcode/pencil_dock__v1.gcode",
"35375/gcode/pencil_dock__v2.gcode",
"35375/gcode/pencil_dock__v3.gcode",
"35375/gcode/pencil_dock__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35375 | gcodes_0564.tar |
35354 | Zero Motorcycles Zero S Swingarm Frame Tube Cap | <p>This is a Frame Tube Cap the Zero Motorcycles Zero S Motorcycle.<br/>
You can use it to store things in the swingarm frame tube.<br/>
I printed it in TPU and stored my warning west in the tube. :)</p>
<p>It is a very snug fit with my Prusa MK3S, so maybe first print only one and see how it fits on your bike.</p>
<... | [
"thingiverse"
] | Hobby & Makers > Automotive | [
"35354/images/large_display_swingarm_frame_tube_cap_35354.jpg",
"35354/images/large_display_20-05-12_16-48-42_8436_35354.jpg"
] | [
"35354/gcode/swingarm_frame_tube_cap__v0.gcode",
"35354/gcode/swingarm_frame_tube_cap__v1.gcode",
"35354/gcode/swingarm_frame_tube_cap__v2.gcode",
"35354/gcode/swingarm_frame_tube_cap__v3.gcode",
"35354/gcode/swingarm_frame_tube_cap__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35354 | gcodes_0564.tar |
35496 | Inch cap for cubic tank | <p>this cap reduce tank thread to 1inch pipe thread for valve</p>
<h3>Print instructions</h3><p>If you want to print the cap without our website, you can just put the .stl into the slicer, but when you print it with our website, you must split it in mmu mode...</p> | [] | Household > Outdoor & Garden | [
"35496/images/98a8f59f-c3ea-4164-b2cc-a442b003c0f6.jpg",
"35496/images/cap.jpg"
] | [
"35496/gcode/cap__v0.gcode",
"35496/gcode/cap__v1.gcode",
"35496/gcode/cap__v2.gcode",
"35496/gcode/cap__v3.gcode",
"35496/gcode/cap__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/35496 | gcodes_0564.tar |
35176 | VESA Adapter for 30 inch Apple Cinema HD Display | <p>An adapter plate for the Apple Cinema Display (30 inch).</p>
<p>This is so you can use one of these old chunky monitors on a more useful stand!</p>
<p>You'll need to remove the stand that comes with the monitor, and save those two fancy looking screws on the side. You'll also need four M4 nuts to use in the screw ho... | [
"display",
"bracket",
"apple",
"adapter",
"screen",
"thingiverse",
"macintosh",
"vesa",
"cinema"
] | Gadgets > Computers | [
"35176/images/large_display_vesa_adapter_v2_35176.jpg"
] | [
"35176/gcode/vesa_adapter_v2__v0.gcode",
"35176/gcode/vesa_adapter_v2__v1.gcode",
"35176/gcode/vesa_adapter_v2__v2.gcode",
"35176/gcode/vesa_adapter_v2__v3.gcode",
"35176/gcode/vesa_adapter_v2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35176 | gcodes_0564.tar |
35160 | Corner-Mounted Shaver Holder | <p>Designed to mount in a corner with two 3M Command strips, this holder should fit a typical electric shaver. IT may fit yours, it may not, but print it (or measure it) and find out!</p>
<h3>Print instructions</h3><h3>Category: Bathroom Summary</h3>
<p>Designed to mount in a corner with two 3M Command strips, this hol... | [
"holder",
"corner",
"thingiverse",
"3mcommandstrips",
"electricshaver"
] | Household > Bathroom | [
"35160/images/9dedff064a025c3c28d3f014d9db52cd_display_large_35.jpg",
"35160/images/95b958f80879e389e2330b9de7093ac4_display_large_35.jpg"
] | [
"35160/gcode/shaver_holder__v0.gcode",
"35160/gcode/shaver_holder__v1.gcode",
"35160/gcode/shaver_holder__v2.gcode",
"35160/gcode/shaver_holder__v3.gcode",
"35160/gcode/shaver_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35160 | gcodes_0564.tar |
35138 | FTM-400 desktop stand | <p>Yaesu FTM-400 desktop stand</p>
<h3>Print instructions</h3><p>Unassociated tags: ftm 400, ham radio</p>
<h3>Category: Electronics Summary</h3>
<p>Yaesu FTM-400 desktop stand</p> | [
"thingiverse",
"yaesu",
"amateurfunk"
] | Hobby & Makers > Electronics | [
"35138/images/6486e463eae24f5472b3bfd2dc7b413e_display_large_35.jpg"
] | [
"35138/gcode/ftm400_stand__v0.gcode",
"35138/gcode/ftm400_stand__v1.gcode",
"35138/gcode/ftm400_stand__v2.gcode",
"35138/gcode/ftm400_stand__v3.gcode",
"35138/gcode/ftm400_stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35138 | gcodes_0564.tar |
35113 | Coin Holder for Swiss franc (CHF) | <p>Coin Holder for Swiss franc (CHF) to keep my change sorted. I've added 0.5mm tolerance to the coin diameter. Coins can't fall out at the front.</p>
<h3>Print instructions</h3><p>Filament: PETG<br/>
Color: Galaxy Black<br/>
Temps: 235°C / 85°C (first layer and the rest)<br/>
Layer height: 0.2mm (first layer and the r... | [
"holder",
"coin",
"stand"
] | Hobby & Makers > Organizers | [
"35113/images/img_20200622_083038.jpg",
"35113/images/img_20200621_230024.jpg"
] | [
"35113/gcode/coin_holder__v0.gcode",
"35113/gcode/coin_holder__v1.gcode",
"35113/gcode/coin_holder__v2.gcode",
"35113/gcode/coin_holder__v3.gcode",
"35113/gcode/coin_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35113 | gcodes_0564.tar |
33457 | Logitec C270 articulated arm to Ender 3 adapter | <p>This adapter connects an articulated arm, which holds a C270 webcam, to the frame of an Ender 3 Pro with the help of two T-nuts and two M3x10 screws.</p>
<p>Just print this adapter, and mount it to the left rail of your Ender 3 with two of these T-nuts:<br/>
<a href="https://www.thingiverse.com/thing:3050607">https:... | [
"logitechc270",
"ender3",
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"33457/images/large_display_complete_camera_arm_on_ender_33457.jpg",
"33457/images/large_display_camera_arm_adapter_mounted_on_ender.jpg",
"33457/images/large_display_adapter_with_t-nuts_33457.jpg",
"33457/images/large_display_articulated_arm_to_ender_3_adapter_.jpg"
] | [
"33457/gcode/articulated_arm_to_ender_3_adapter__v0.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v1.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v2.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v3.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33457 | gcodes_0564.tar |
35018 | Microscope Stand Upgrade | <p>An upgraded stand for this popular and inexpensive USB microscope (Jiusion 1000x and similar).</p>
<p>The clamp that comes in in the kit it's way too flexible, making it really hard to focus. This upgrade uses a simple trick to hold the microscope steadier: the clamp itself gets tightened by the same screw mechanism... | [
"camera",
"stand",
"bracket",
"clamp",
"macro",
"endoscope",
"thingiverse",
"microscope",
"zoom",
"magnification",
"jiusion"
] | Hobby & Makers > Electronics | [
"35018/images/f7c472bd094bfd2f5498c11a586da785_display_large_35.jpg",
"35018/images/4341d42443cbed87ee0a1e9f85d8c34f_display_large_35.jpg",
"35018/images/d92debd768234dcdbb1b077844122e4b_display_large_35.jpg",
"35018/images/2b1b8ad7bbab2f43f5b4ac8fab9b5d60_display_large_35.jpg"
] | [
"35018/gcode/microscope__v0.gcode",
"35018/gcode/microscope__v1.gcode",
"35018/gcode/microscope__v2.gcode",
"35018/gcode/microscope__v3.gcode",
"35018/gcode/microscope__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35018 | gcodes_0564.tar |
33451 | Prusa i3 Mk3S extruder indicator | <p>This little extruder indicator was inspired by others with a similar design. They did not fully meet my needs, so I made my own.</p>
<p>My design specification included:</p>
<ul>
<li>indication needs to be unique over a 360° range, i.e. no repetitive pattern (which is really helpful if you watch via a camera live st... | [
"extruder",
"thingiverse"
] | 3D Printers > Prusa Parts & Upgrades | [
"33451/images/large_display_extruder_indicator_photo_33451.jpg",
"33451/images/large_display_bildschirmfoto_vom_2020-02-28_21-45.jpg",
"33451/images/large_display_extruder_indicator_33451.jpg"
] | [
"33451/gcode/extruder_indicator__v0.gcode",
"33451/gcode/extruder_indicator__v1.gcode",
"33451/gcode/extruder_indicator__v2.gcode",
"33451/gcode/extruder_indicator__v3.gcode",
"33451/gcode/extruder_indicator__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33451 | gcodes_0564.tar |
33405 | Arduino MKR series simple stand | <p>The new arduino form factor has long thin pins that are protected by a conductive foam inside of the box. This is a simple stand that covers and protect those pins.</p>
<h3>Print instructions</h3><h3>Category: Electronics Summary</h3>
<p>The new arduino form factor has long thin pins that are protected by a conducti... | [
"stand",
"arduino",
"arduinocase",
"thingiverse",
"mkr",
"mkr1000",
"mkr1500"
] | Hobby & Makers > Electronics | [
"33405/images/df0ef6aa88bdca77df722214f493878c_display_large_33.jpg",
"33405/images/cb18ac913b4e0d3942ed453208b3df1b_display_large_33.jpg",
"33405/images/32c567325611430dfcb6927542620324_display_large_33.jpg",
"33405/images/624781954fd5845171f868fdb26d3af2_display_large_33.jpg"
] | [
"33405/gcode/stand__v0.gcode",
"33405/gcode/stand__v1.gcode",
"33405/gcode/stand__v2.gcode",
"33405/gcode/stand__v3.gcode",
"33405/gcode/stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33405 | gcodes_0564.tar |
32782 | Soporte para móvil o tablet | <p>Soporte para móvil o tablet</p>
| [] | 3D Printers > Accessories | [
"32782/images/soporte-movil-o-tablets-kenybuey-2.jpg",
"32782/images/soporte-movil-o-tablets-kenybuey.jpg"
] | [
"32782/gcode/soporte-movil-tablet-kenybuey__v0.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v1.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v2.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v3.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/32782 | gcodes_0564.tar |
32846 | Cthulhu!! | <p>This model is designed to be printed on FDM without need for any supports.<br/>
On the photos you can see it printed in PLA, using 0.8mm diameter nozzle, in 500% (~10cm) and 1000% (~20cm) scale.<br/>
made using BLENDER 2.81</p>
<p>link to render:</p>
<p>
<figure class="media">
<oembed url="https://youtu.be/_D6ukogLY... | [
"mini",
"monster",
"horror",
"fantasy",
"sculpt",
"sculpture",
"lovecraft",
"monsters",
"cthulhu",
"miniatures",
"contest",
"nosupport",
"nosupportneeded",
"eldritchhorror",
"3dsculpture",
"thecallofcthulhu",
"nosupports",
"arkhamhorror",
"sculpting"
] | Art & Design > Sculptures | [
"32846/images/cthulhu5.jpg",
"32846/images/cthulhu1.jpg",
"32846/images/cthulhu3.jpg",
"32846/images/cthulhu4.jpg",
"32846/images/cthulhu2.jpg",
"32846/images/101390714_3325706317461228_5792910534755359241_n.jpg",
"32846/images/102301984_697359921054378_2276774146983921844_n.jpg",
"32846/images/101793... | [
"32846/gcode/kajtek_k_cthulhu__v0.gcode",
"32846/gcode/kajtek_k_cthulhu__v1.gcode",
"32846/gcode/kajtek_k_cthulhu__v2.gcode",
"32846/gcode/kajtek_k_cthulhu__v3.gcode",
"32846/gcode/kajtek_k_cthulhu__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/32846 | gcodes_0564.tar |
35426 | TP-Link POE Wall Mount | <p>This wall mount is meant for the TP-Link TL-POE150S Injector, used for powering on a device with Power Over Ethernet while not having a compatible network plug available.</p>
<p>For testing purpose I printed this on a layer height of .3mm, however the result will be much better when printed with .10mm or .20mm layer... | [
"wall",
"mount",
"wallmount",
"thingiverse"
] | Household > Other House Equipment | [
"35426/images/large_display_img_1560_35426.jpg",
"35426/images/large_display_img_1557_35426.jpg",
"35426/images/large_display_img_1558_35426.jpg",
"35426/images/large_display_img_1555_35426.jpg",
"35426/images/large_display_img_1543_35426.jpg",
"35426/images/large_display_img_1544_35426.jpg",
"35426/ima... | [
"35426/gcode/tplink_poe_wall_mount__v0.gcode",
"35426/gcode/tplink_poe_wall_mount__v1.gcode",
"35426/gcode/tplink_poe_wall_mount__v2.gcode",
"35426/gcode/tplink_poe_wall_mount__v3.gcode",
"35426/gcode/tplink_poe_wall_mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35426 | gcodes_0564.tar |
35496 | Inch cap for cubic tank | <p>this cap reduce tank thread to 1inch pipe thread for valve</p>
<h3>Print instructions</h3><p>If you want to print the cap without our website, you can just put the .stl into the slicer, but when you print it with our website, you must split it in mmu mode...</p> | [] | Household > Outdoor & Garden | [
"35496/images/98a8f59f-c3ea-4164-b2cc-a442b003c0f6.jpg",
"35496/images/cap.jpg"
] | [
"35496/gcode/cap__v0.gcode",
"35496/gcode/cap__v1.gcode",
"35496/gcode/cap__v2.gcode",
"35496/gcode/cap__v3.gcode",
"35496/gcode/cap__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/35496 | gcodes_0564.tar |
35375 | Apple Pencil Charging Dock | <p>I dislike clutter on my desk, so I made an Apple Pencil charging dock that attaches to the side of my monitor with 3M command strips [Large, see link below].</p>
<p>The dock sticks to a wall or any other surface and provides an organized way to store and charge the Apple Pencil, the cap, and the adapter. Your cap si... | [
"stand",
"wallmount",
"dock",
"charging",
"apple",
"monitor",
"chargingdock",
"wallmounted",
"thingiverse",
"chargingstation",
"chargingstand",
"monitormount",
"3mcommandstrips",
"3mcommand",
"applepencil",
"applepencilcap",
"applepencilholder",
"applepencilstand"
] | Gadgets > Other Gadgets | [
"35375/images/5edcb6c95ab8af61f0c69a4cbae3d8ca_display_large_3.jpg",
"35375/images/6eac5ff89da0d670091a15d33aca8348_display_large_3.jpg",
"35375/images/capture_35375.jpg",
"35375/images/9b116b77cb2adafe3906d90aef468c65_display_large_35.jpg",
"35375/images/f6a37c342c95a01b1d715a4be6d35f96_display_large_35.jp... | [
"35375/gcode/pencil_dock__v0.gcode",
"35375/gcode/pencil_dock__v1.gcode",
"35375/gcode/pencil_dock__v2.gcode",
"35375/gcode/pencil_dock__v3.gcode",
"35375/gcode/pencil_dock__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35375 | gcodes_0565.tar |
35354 | Zero Motorcycles Zero S Swingarm Frame Tube Cap | <p>This is a Frame Tube Cap the Zero Motorcycles Zero S Motorcycle.<br/>
You can use it to store things in the swingarm frame tube.<br/>
I printed it in TPU and stored my warning west in the tube. :)</p>
<p>It is a very snug fit with my Prusa MK3S, so maybe first print only one and see how it fits on your bike.</p>
<... | [
"thingiverse"
] | Hobby & Makers > Automotive | [
"35354/images/large_display_swingarm_frame_tube_cap_35354.jpg",
"35354/images/large_display_20-05-12_16-48-42_8436_35354.jpg"
] | [
"35354/gcode/swingarm_frame_tube_cap__v0.gcode",
"35354/gcode/swingarm_frame_tube_cap__v1.gcode",
"35354/gcode/swingarm_frame_tube_cap__v2.gcode",
"35354/gcode/swingarm_frame_tube_cap__v3.gcode",
"35354/gcode/swingarm_frame_tube_cap__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35354 | gcodes_0565.tar |
35176 | VESA Adapter for 30 inch Apple Cinema HD Display | <p>An adapter plate for the Apple Cinema Display (30 inch).</p>
<p>This is so you can use one of these old chunky monitors on a more useful stand!</p>
<p>You'll need to remove the stand that comes with the monitor, and save those two fancy looking screws on the side. You'll also need four M4 nuts to use in the screw ho... | [
"display",
"bracket",
"apple",
"adapter",
"screen",
"thingiverse",
"macintosh",
"vesa",
"cinema"
] | Gadgets > Computers | [
"35176/images/large_display_vesa_adapter_v2_35176.jpg"
] | [
"35176/gcode/vesa_adapter_v2__v0.gcode",
"35176/gcode/vesa_adapter_v2__v1.gcode",
"35176/gcode/vesa_adapter_v2__v2.gcode",
"35176/gcode/vesa_adapter_v2__v3.gcode",
"35176/gcode/vesa_adapter_v2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35176 | gcodes_0565.tar |
35160 | Corner-Mounted Shaver Holder | <p>Designed to mount in a corner with two 3M Command strips, this holder should fit a typical electric shaver. IT may fit yours, it may not, but print it (or measure it) and find out!</p>
<h3>Print instructions</h3><h3>Category: Bathroom Summary</h3>
<p>Designed to mount in a corner with two 3M Command strips, this hol... | [
"holder",
"corner",
"thingiverse",
"3mcommandstrips",
"electricshaver"
] | Household > Bathroom | [
"35160/images/9dedff064a025c3c28d3f014d9db52cd_display_large_35.jpg",
"35160/images/95b958f80879e389e2330b9de7093ac4_display_large_35.jpg"
] | [
"35160/gcode/shaver_holder__v0.gcode",
"35160/gcode/shaver_holder__v1.gcode",
"35160/gcode/shaver_holder__v2.gcode",
"35160/gcode/shaver_holder__v3.gcode",
"35160/gcode/shaver_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35160 | gcodes_0565.tar |
35138 | FTM-400 desktop stand | <p>Yaesu FTM-400 desktop stand</p>
<h3>Print instructions</h3><p>Unassociated tags: ftm 400, ham radio</p>
<h3>Category: Electronics Summary</h3>
<p>Yaesu FTM-400 desktop stand</p> | [
"thingiverse",
"yaesu",
"amateurfunk"
] | Hobby & Makers > Electronics | [
"35138/images/6486e463eae24f5472b3bfd2dc7b413e_display_large_35.jpg"
] | [
"35138/gcode/ftm400_stand__v0.gcode",
"35138/gcode/ftm400_stand__v1.gcode",
"35138/gcode/ftm400_stand__v2.gcode",
"35138/gcode/ftm400_stand__v3.gcode",
"35138/gcode/ftm400_stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35138 | gcodes_0565.tar |
35265 | Prusa Sized Artichoke Lamp Shade | <p>I like the design, but since my Prusa i3 MK2 has a max build height of 20cm I had to re-scale it a little. Since making it smaller would have also made the hole for the light socket too small that had to change too.</p>
<h3>Print instructions</h3><h3>Category: Decor Summary</h3>
<p>I like the design, but since my Pr... | [
"lampshade",
"thingiverse"
] | Household > Home Decor | [
"35265/images/e34e5341ada4ee0fc466068fb026b9d9_display_large_35.jpg"
] | [
"35265/gcode/artichokelampshade__v0.gcode",
"35265/gcode/artichokelampshade__v1.gcode",
"35265/gcode/artichokelampshade__v2.gcode",
"35265/gcode/artichokelampshade__v3.gcode",
"35265/gcode/artichokelampshade__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35265 | gcodes_0565.tar |
35018 | Microscope Stand Upgrade | <p>An upgraded stand for this popular and inexpensive USB microscope (Jiusion 1000x and similar).</p>
<p>The clamp that comes in in the kit it's way too flexible, making it really hard to focus. This upgrade uses a simple trick to hold the microscope steadier: the clamp itself gets tightened by the same screw mechanism... | [
"camera",
"stand",
"bracket",
"clamp",
"macro",
"endoscope",
"thingiverse",
"microscope",
"zoom",
"magnification",
"jiusion"
] | Hobby & Makers > Electronics | [
"35018/images/f7c472bd094bfd2f5498c11a586da785_display_large_35.jpg",
"35018/images/4341d42443cbed87ee0a1e9f85d8c34f_display_large_35.jpg",
"35018/images/d92debd768234dcdbb1b077844122e4b_display_large_35.jpg",
"35018/images/2b1b8ad7bbab2f43f5b4ac8fab9b5d60_display_large_35.jpg"
] | [
"35018/gcode/microscope__v0.gcode",
"35018/gcode/microscope__v1.gcode",
"35018/gcode/microscope__v2.gcode",
"35018/gcode/microscope__v3.gcode",
"35018/gcode/microscope__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35018 | gcodes_0565.tar |
35113 | Coin Holder for Swiss franc (CHF) | <p>Coin Holder for Swiss franc (CHF) to keep my change sorted. I've added 0.5mm tolerance to the coin diameter. Coins can't fall out at the front.</p>
<h3>Print instructions</h3><p>Filament: PETG<br/>
Color: Galaxy Black<br/>
Temps: 235°C / 85°C (first layer and the rest)<br/>
Layer height: 0.2mm (first layer and the r... | [
"holder",
"coin",
"stand"
] | Hobby & Makers > Organizers | [
"35113/images/img_20200622_083038.jpg",
"35113/images/img_20200621_230024.jpg"
] | [
"35113/gcode/coin_holder__v0.gcode",
"35113/gcode/coin_holder__v1.gcode",
"35113/gcode/coin_holder__v2.gcode",
"35113/gcode/coin_holder__v3.gcode",
"35113/gcode/coin_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35113 | gcodes_0565.tar |
33457 | Logitec C270 articulated arm to Ender 3 adapter | <p>This adapter connects an articulated arm, which holds a C270 webcam, to the frame of an Ender 3 Pro with the help of two T-nuts and two M3x10 screws.</p>
<p>Just print this adapter, and mount it to the left rail of your Ender 3 with two of these T-nuts:<br/>
<a href="https://www.thingiverse.com/thing:3050607">https:... | [
"logitechc270",
"ender3",
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"33457/images/large_display_complete_camera_arm_on_ender_33457.jpg",
"33457/images/large_display_camera_arm_adapter_mounted_on_ender.jpg",
"33457/images/large_display_adapter_with_t-nuts_33457.jpg",
"33457/images/large_display_articulated_arm_to_ender_3_adapter_.jpg"
] | [
"33457/gcode/articulated_arm_to_ender_3_adapter__v0.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v1.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v2.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v3.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33457 | gcodes_0565.tar |
33451 | Prusa i3 Mk3S extruder indicator | <p>This little extruder indicator was inspired by others with a similar design. They did not fully meet my needs, so I made my own.</p>
<p>My design specification included:</p>
<ul>
<li>indication needs to be unique over a 360° range, i.e. no repetitive pattern (which is really helpful if you watch via a camera live st... | [
"extruder",
"thingiverse"
] | 3D Printers > Prusa Parts & Upgrades | [
"33451/images/large_display_extruder_indicator_photo_33451.jpg",
"33451/images/large_display_bildschirmfoto_vom_2020-02-28_21-45.jpg",
"33451/images/large_display_extruder_indicator_33451.jpg"
] | [
"33451/gcode/extruder_indicator__v0.gcode",
"33451/gcode/extruder_indicator__v1.gcode",
"33451/gcode/extruder_indicator__v2.gcode",
"33451/gcode/extruder_indicator__v3.gcode",
"33451/gcode/extruder_indicator__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33451 | gcodes_0565.tar |
33405 | Arduino MKR series simple stand | <p>The new arduino form factor has long thin pins that are protected by a conductive foam inside of the box. This is a simple stand that covers and protect those pins.</p>
<h3>Print instructions</h3><h3>Category: Electronics Summary</h3>
<p>The new arduino form factor has long thin pins that are protected by a conducti... | [
"stand",
"arduino",
"arduinocase",
"thingiverse",
"mkr",
"mkr1000",
"mkr1500"
] | Hobby & Makers > Electronics | [
"33405/images/df0ef6aa88bdca77df722214f493878c_display_large_33.jpg",
"33405/images/cb18ac913b4e0d3942ed453208b3df1b_display_large_33.jpg",
"33405/images/32c567325611430dfcb6927542620324_display_large_33.jpg",
"33405/images/624781954fd5845171f868fdb26d3af2_display_large_33.jpg"
] | [
"33405/gcode/stand__v0.gcode",
"33405/gcode/stand__v1.gcode",
"33405/gcode/stand__v2.gcode",
"33405/gcode/stand__v3.gcode",
"33405/gcode/stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33405 | gcodes_0565.tar |
32782 | Soporte para móvil o tablet | <p>Soporte para móvil o tablet</p>
| [] | 3D Printers > Accessories | [
"32782/images/soporte-movil-o-tablets-kenybuey-2.jpg",
"32782/images/soporte-movil-o-tablets-kenybuey.jpg"
] | [
"32782/gcode/soporte-movil-tablet-kenybuey__v0.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v1.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v2.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v3.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/32782 | gcodes_0565.tar |
32846 | Cthulhu!! | <p>This model is designed to be printed on FDM without need for any supports.<br/>
On the photos you can see it printed in PLA, using 0.8mm diameter nozzle, in 500% (~10cm) and 1000% (~20cm) scale.<br/>
made using BLENDER 2.81</p>
<p>link to render:</p>
<p>
<figure class="media">
<oembed url="https://youtu.be/_D6ukogLY... | [
"mini",
"monster",
"horror",
"fantasy",
"sculpt",
"sculpture",
"lovecraft",
"monsters",
"cthulhu",
"miniatures",
"contest",
"nosupport",
"nosupportneeded",
"eldritchhorror",
"3dsculpture",
"thecallofcthulhu",
"nosupports",
"arkhamhorror",
"sculpting"
] | Art & Design > Sculptures | [
"32846/images/cthulhu5.jpg",
"32846/images/cthulhu1.jpg",
"32846/images/cthulhu3.jpg",
"32846/images/cthulhu4.jpg",
"32846/images/cthulhu2.jpg",
"32846/images/101390714_3325706317461228_5792910534755359241_n.jpg",
"32846/images/102301984_697359921054378_2276774146983921844_n.jpg",
"32846/images/101793... | [
"32846/gcode/kajtek_k_cthulhu__v0.gcode",
"32846/gcode/kajtek_k_cthulhu__v1.gcode",
"32846/gcode/kajtek_k_cthulhu__v2.gcode",
"32846/gcode/kajtek_k_cthulhu__v3.gcode",
"32846/gcode/kajtek_k_cthulhu__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/32846 | gcodes_0565.tar |
35426 | TP-Link POE Wall Mount | <p>This wall mount is meant for the TP-Link TL-POE150S Injector, used for powering on a device with Power Over Ethernet while not having a compatible network plug available.</p>
<p>For testing purpose I printed this on a layer height of .3mm, however the result will be much better when printed with .10mm or .20mm layer... | [
"wall",
"mount",
"wallmount",
"thingiverse"
] | Household > Other House Equipment | [
"35426/images/large_display_img_1560_35426.jpg",
"35426/images/large_display_img_1557_35426.jpg",
"35426/images/large_display_img_1558_35426.jpg",
"35426/images/large_display_img_1555_35426.jpg",
"35426/images/large_display_img_1543_35426.jpg",
"35426/images/large_display_img_1544_35426.jpg",
"35426/ima... | [
"35426/gcode/tplink_poe_wall_mount__v0.gcode",
"35426/gcode/tplink_poe_wall_mount__v1.gcode",
"35426/gcode/tplink_poe_wall_mount__v2.gcode",
"35426/gcode/tplink_poe_wall_mount__v3.gcode",
"35426/gcode/tplink_poe_wall_mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35426 | gcodes_0565.tar |
35496 | Inch cap for cubic tank | <p>this cap reduce tank thread to 1inch pipe thread for valve</p>
<h3>Print instructions</h3><p>If you want to print the cap without our website, you can just put the .stl into the slicer, but when you print it with our website, you must split it in mmu mode...</p> | [] | Household > Outdoor & Garden | [
"35496/images/98a8f59f-c3ea-4164-b2cc-a442b003c0f6.jpg",
"35496/images/cap.jpg"
] | [
"35496/gcode/cap__v0.gcode",
"35496/gcode/cap__v1.gcode",
"35496/gcode/cap__v2.gcode",
"35496/gcode/cap__v3.gcode",
"35496/gcode/cap__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/35496 | gcodes_0565.tar |
35375 | Apple Pencil Charging Dock | <p>I dislike clutter on my desk, so I made an Apple Pencil charging dock that attaches to the side of my monitor with 3M command strips [Large, see link below].</p>
<p>The dock sticks to a wall or any other surface and provides an organized way to store and charge the Apple Pencil, the cap, and the adapter. Your cap si... | [
"stand",
"wallmount",
"dock",
"charging",
"apple",
"monitor",
"chargingdock",
"wallmounted",
"thingiverse",
"chargingstation",
"chargingstand",
"monitormount",
"3mcommandstrips",
"3mcommand",
"applepencil",
"applepencilcap",
"applepencilholder",
"applepencilstand"
] | Gadgets > Other Gadgets | [
"35375/images/5edcb6c95ab8af61f0c69a4cbae3d8ca_display_large_3.jpg",
"35375/images/6eac5ff89da0d670091a15d33aca8348_display_large_3.jpg",
"35375/images/capture_35375.jpg",
"35375/images/9b116b77cb2adafe3906d90aef468c65_display_large_35.jpg",
"35375/images/f6a37c342c95a01b1d715a4be6d35f96_display_large_35.jp... | [
"35375/gcode/pencil_dock__v0.gcode",
"35375/gcode/pencil_dock__v1.gcode",
"35375/gcode/pencil_dock__v2.gcode",
"35375/gcode/pencil_dock__v3.gcode",
"35375/gcode/pencil_dock__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35375 | gcodes_0565.tar |
35354 | Zero Motorcycles Zero S Swingarm Frame Tube Cap | <p>This is a Frame Tube Cap the Zero Motorcycles Zero S Motorcycle.<br/>
You can use it to store things in the swingarm frame tube.<br/>
I printed it in TPU and stored my warning west in the tube. :)</p>
<p>It is a very snug fit with my Prusa MK3S, so maybe first print only one and see how it fits on your bike.</p>
<... | [
"thingiverse"
] | Hobby & Makers > Automotive | [
"35354/images/large_display_swingarm_frame_tube_cap_35354.jpg",
"35354/images/large_display_20-05-12_16-48-42_8436_35354.jpg"
] | [
"35354/gcode/swingarm_frame_tube_cap__v0.gcode",
"35354/gcode/swingarm_frame_tube_cap__v1.gcode",
"35354/gcode/swingarm_frame_tube_cap__v2.gcode",
"35354/gcode/swingarm_frame_tube_cap__v3.gcode",
"35354/gcode/swingarm_frame_tube_cap__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35354 | gcodes_0565.tar |
35176 | VESA Adapter for 30 inch Apple Cinema HD Display | <p>An adapter plate for the Apple Cinema Display (30 inch).</p>
<p>This is so you can use one of these old chunky monitors on a more useful stand!</p>
<p>You'll need to remove the stand that comes with the monitor, and save those two fancy looking screws on the side. You'll also need four M4 nuts to use in the screw ho... | [
"display",
"bracket",
"apple",
"adapter",
"screen",
"thingiverse",
"macintosh",
"vesa",
"cinema"
] | Gadgets > Computers | [
"35176/images/large_display_vesa_adapter_v2_35176.jpg"
] | [
"35176/gcode/vesa_adapter_v2__v0.gcode",
"35176/gcode/vesa_adapter_v2__v1.gcode",
"35176/gcode/vesa_adapter_v2__v2.gcode",
"35176/gcode/vesa_adapter_v2__v3.gcode",
"35176/gcode/vesa_adapter_v2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35176 | gcodes_0565.tar |
35160 | Corner-Mounted Shaver Holder | <p>Designed to mount in a corner with two 3M Command strips, this holder should fit a typical electric shaver. IT may fit yours, it may not, but print it (or measure it) and find out!</p>
<h3>Print instructions</h3><h3>Category: Bathroom Summary</h3>
<p>Designed to mount in a corner with two 3M Command strips, this hol... | [
"holder",
"corner",
"thingiverse",
"3mcommandstrips",
"electricshaver"
] | Household > Bathroom | [
"35160/images/9dedff064a025c3c28d3f014d9db52cd_display_large_35.jpg",
"35160/images/95b958f80879e389e2330b9de7093ac4_display_large_35.jpg"
] | [
"35160/gcode/shaver_holder__v0.gcode",
"35160/gcode/shaver_holder__v1.gcode",
"35160/gcode/shaver_holder__v2.gcode",
"35160/gcode/shaver_holder__v3.gcode",
"35160/gcode/shaver_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35160 | gcodes_0565.tar |
35138 | FTM-400 desktop stand | <p>Yaesu FTM-400 desktop stand</p>
<h3>Print instructions</h3><p>Unassociated tags: ftm 400, ham radio</p>
<h3>Category: Electronics Summary</h3>
<p>Yaesu FTM-400 desktop stand</p> | [
"thingiverse",
"yaesu",
"amateurfunk"
] | Hobby & Makers > Electronics | [
"35138/images/6486e463eae24f5472b3bfd2dc7b413e_display_large_35.jpg"
] | [
"35138/gcode/ftm400_stand__v0.gcode",
"35138/gcode/ftm400_stand__v1.gcode",
"35138/gcode/ftm400_stand__v2.gcode",
"35138/gcode/ftm400_stand__v3.gcode",
"35138/gcode/ftm400_stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35138 | gcodes_0565.tar |
35265 | Prusa Sized Artichoke Lamp Shade | <p>I like the design, but since my Prusa i3 MK2 has a max build height of 20cm I had to re-scale it a little. Since making it smaller would have also made the hole for the light socket too small that had to change too.</p>
<h3>Print instructions</h3><h3>Category: Decor Summary</h3>
<p>I like the design, but since my Pr... | [
"lampshade",
"thingiverse"
] | Household > Home Decor | [
"35265/images/e34e5341ada4ee0fc466068fb026b9d9_display_large_35.jpg"
] | [
"35265/gcode/artichokelampshade__v0.gcode",
"35265/gcode/artichokelampshade__v1.gcode",
"35265/gcode/artichokelampshade__v2.gcode",
"35265/gcode/artichokelampshade__v3.gcode",
"35265/gcode/artichokelampshade__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35265 | gcodes_0565.tar |
35018 | Microscope Stand Upgrade | <p>An upgraded stand for this popular and inexpensive USB microscope (Jiusion 1000x and similar).</p>
<p>The clamp that comes in in the kit it's way too flexible, making it really hard to focus. This upgrade uses a simple trick to hold the microscope steadier: the clamp itself gets tightened by the same screw mechanism... | [
"camera",
"stand",
"bracket",
"clamp",
"macro",
"endoscope",
"thingiverse",
"microscope",
"zoom",
"magnification",
"jiusion"
] | Hobby & Makers > Electronics | [
"35018/images/f7c472bd094bfd2f5498c11a586da785_display_large_35.jpg",
"35018/images/4341d42443cbed87ee0a1e9f85d8c34f_display_large_35.jpg",
"35018/images/d92debd768234dcdbb1b077844122e4b_display_large_35.jpg",
"35018/images/2b1b8ad7bbab2f43f5b4ac8fab9b5d60_display_large_35.jpg"
] | [
"35018/gcode/microscope__v0.gcode",
"35018/gcode/microscope__v1.gcode",
"35018/gcode/microscope__v2.gcode",
"35018/gcode/microscope__v3.gcode",
"35018/gcode/microscope__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35018 | gcodes_0565.tar |
33457 | Logitec C270 articulated arm to Ender 3 adapter | <p>This adapter connects an articulated arm, which holds a C270 webcam, to the frame of an Ender 3 Pro with the help of two T-nuts and two M3x10 screws.</p>
<p>Just print this adapter, and mount it to the left rail of your Ender 3 with two of these T-nuts:<br/>
<a href="https://www.thingiverse.com/thing:3050607">https:... | [
"logitechc270",
"ender3",
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"33457/images/large_display_complete_camera_arm_on_ender_33457.jpg",
"33457/images/large_display_camera_arm_adapter_mounted_on_ender.jpg",
"33457/images/large_display_adapter_with_t-nuts_33457.jpg",
"33457/images/large_display_articulated_arm_to_ender_3_adapter_.jpg"
] | [
"33457/gcode/articulated_arm_to_ender_3_adapter__v0.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v1.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v2.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v3.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33457 | gcodes_0565.tar |
33451 | Prusa i3 Mk3S extruder indicator | <p>This little extruder indicator was inspired by others with a similar design. They did not fully meet my needs, so I made my own.</p>
<p>My design specification included:</p>
<ul>
<li>indication needs to be unique over a 360° range, i.e. no repetitive pattern (which is really helpful if you watch via a camera live st... | [
"extruder",
"thingiverse"
] | 3D Printers > Prusa Parts & Upgrades | [
"33451/images/large_display_extruder_indicator_photo_33451.jpg",
"33451/images/large_display_bildschirmfoto_vom_2020-02-28_21-45.jpg",
"33451/images/large_display_extruder_indicator_33451.jpg"
] | [
"33451/gcode/extruder_indicator__v0.gcode",
"33451/gcode/extruder_indicator__v1.gcode",
"33451/gcode/extruder_indicator__v2.gcode",
"33451/gcode/extruder_indicator__v3.gcode",
"33451/gcode/extruder_indicator__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33451 | gcodes_0565.tar |
33405 | Arduino MKR series simple stand | <p>The new arduino form factor has long thin pins that are protected by a conductive foam inside of the box. This is a simple stand that covers and protect those pins.</p>
<h3>Print instructions</h3><h3>Category: Electronics Summary</h3>
<p>The new arduino form factor has long thin pins that are protected by a conducti... | [
"stand",
"arduino",
"arduinocase",
"thingiverse",
"mkr",
"mkr1000",
"mkr1500"
] | Hobby & Makers > Electronics | [
"33405/images/df0ef6aa88bdca77df722214f493878c_display_large_33.jpg",
"33405/images/cb18ac913b4e0d3942ed453208b3df1b_display_large_33.jpg",
"33405/images/32c567325611430dfcb6927542620324_display_large_33.jpg",
"33405/images/624781954fd5845171f868fdb26d3af2_display_large_33.jpg"
] | [
"33405/gcode/stand__v0.gcode",
"33405/gcode/stand__v1.gcode",
"33405/gcode/stand__v2.gcode",
"33405/gcode/stand__v3.gcode",
"33405/gcode/stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33405 | gcodes_0565.tar |
35113 | Coin Holder for Swiss franc (CHF) | <p>Coin Holder for Swiss franc (CHF) to keep my change sorted. I've added 0.5mm tolerance to the coin diameter. Coins can't fall out at the front.</p>
<h3>Print instructions</h3><p>Filament: PETG<br/>
Color: Galaxy Black<br/>
Temps: 235°C / 85°C (first layer and the rest)<br/>
Layer height: 0.2mm (first layer and the r... | [
"holder",
"coin",
"stand"
] | Hobby & Makers > Organizers | [
"35113/images/img_20200622_083038.jpg",
"35113/images/img_20200621_230024.jpg"
] | [
"35113/gcode/coin_holder__v0.gcode",
"35113/gcode/coin_holder__v1.gcode",
"35113/gcode/coin_holder__v2.gcode",
"35113/gcode/coin_holder__v3.gcode",
"35113/gcode/coin_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35113 | gcodes_0565.tar |
32782 | Soporte para móvil o tablet | <p>Soporte para móvil o tablet</p>
| [] | 3D Printers > Accessories | [
"32782/images/soporte-movil-o-tablets-kenybuey-2.jpg",
"32782/images/soporte-movil-o-tablets-kenybuey.jpg"
] | [
"32782/gcode/soporte-movil-tablet-kenybuey__v0.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v1.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v2.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v3.gcode",
"32782/gcode/soporte-movil-tablet-kenybuey__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/32782 | gcodes_0565.tar |
32846 | Cthulhu!! | <p>This model is designed to be printed on FDM without need for any supports.<br/>
On the photos you can see it printed in PLA, using 0.8mm diameter nozzle, in 500% (~10cm) and 1000% (~20cm) scale.<br/>
made using BLENDER 2.81</p>
<p>link to render:</p>
<p>
<figure class="media">
<oembed url="https://youtu.be/_D6ukogLY... | [
"mini",
"monster",
"horror",
"fantasy",
"sculpt",
"sculpture",
"lovecraft",
"monsters",
"cthulhu",
"miniatures",
"contest",
"nosupport",
"nosupportneeded",
"eldritchhorror",
"3dsculpture",
"thecallofcthulhu",
"nosupports",
"arkhamhorror",
"sculpting"
] | Art & Design > Sculptures | [
"32846/images/cthulhu5.jpg",
"32846/images/cthulhu1.jpg",
"32846/images/cthulhu3.jpg",
"32846/images/cthulhu4.jpg",
"32846/images/cthulhu2.jpg",
"32846/images/101390714_3325706317461228_5792910534755359241_n.jpg",
"32846/images/102301984_697359921054378_2276774146983921844_n.jpg",
"32846/images/101793... | [
"32846/gcode/kajtek_k_cthulhu__v0.gcode",
"32846/gcode/kajtek_k_cthulhu__v1.gcode",
"32846/gcode/kajtek_k_cthulhu__v2.gcode",
"32846/gcode/kajtek_k_cthulhu__v3.gcode",
"32846/gcode/kajtek_k_cthulhu__v4.gcode"
] | Creative Commons — Public Domain | https://www.printables.com/model/32846 | gcodes_0565.tar |
32275 | Schäufelchen | <p>Ist für Gewürze gedacht</p>
<h3>Print instructions</h3><p>PLA</p> | [] | Household > Kitchen | [
"32275/images/schaufelchen.jpg"
] | [
"32275/gcode/schaeufelchen-v1__v0.gcode",
"32275/gcode/schaeufelchen-v1__v1.gcode",
"32275/gcode/schaeufelchen-v1__v2.gcode",
"32275/gcode/schaeufelchen-v1__v3.gcode",
"32275/gcode/schaeufelchen-v1__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/32275 | gcodes_0565.tar |
35496 | Inch cap for cubic tank | <p>this cap reduce tank thread to 1inch pipe thread for valve</p>
<h3>Print instructions</h3><p>If you want to print the cap without our website, you can just put the .stl into the slicer, but when you print it with our website, you must split it in mmu mode...</p> | [] | Household > Outdoor & Garden | [
"35496/images/98a8f59f-c3ea-4164-b2cc-a442b003c0f6.jpg",
"35496/images/cap.jpg"
] | [
"35496/gcode/cap__v0.gcode",
"35496/gcode/cap__v1.gcode",
"35496/gcode/cap__v2.gcode",
"35496/gcode/cap__v3.gcode",
"35496/gcode/cap__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/35496 | gcodes_0565.tar |
35426 | TP-Link POE Wall Mount | <p>This wall mount is meant for the TP-Link TL-POE150S Injector, used for powering on a device with Power Over Ethernet while not having a compatible network plug available.</p>
<p>For testing purpose I printed this on a layer height of .3mm, however the result will be much better when printed with .10mm or .20mm layer... | [
"wall",
"mount",
"wallmount",
"thingiverse"
] | Household > Other House Equipment | [
"35426/images/large_display_img_1560_35426.jpg",
"35426/images/large_display_img_1557_35426.jpg",
"35426/images/large_display_img_1558_35426.jpg",
"35426/images/large_display_img_1555_35426.jpg",
"35426/images/large_display_img_1543_35426.jpg",
"35426/images/large_display_img_1544_35426.jpg",
"35426/ima... | [
"35426/gcode/tplink_poe_wall_mount__v0.gcode",
"35426/gcode/tplink_poe_wall_mount__v1.gcode",
"35426/gcode/tplink_poe_wall_mount__v2.gcode",
"35426/gcode/tplink_poe_wall_mount__v3.gcode",
"35426/gcode/tplink_poe_wall_mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35426 | gcodes_0565.tar |
35426 | TP-Link POE Wall Mount | <p>This wall mount is meant for the TP-Link TL-POE150S Injector, used for powering on a device with Power Over Ethernet while not having a compatible network plug available.</p>
<p>For testing purpose I printed this on a layer height of .3mm, however the result will be much better when printed with .10mm or .20mm layer... | [
"wall",
"mount",
"wallmount",
"thingiverse"
] | Household > Other House Equipment | [
"35426/images/large_display_img_1560_35426.jpg",
"35426/images/large_display_img_1557_35426.jpg",
"35426/images/large_display_img_1558_35426.jpg",
"35426/images/large_display_img_1555_35426.jpg",
"35426/images/large_display_img_1543_35426.jpg",
"35426/images/large_display_img_1544_35426.jpg",
"35426/ima... | [
"35426/gcode/tplink_poe_wall_mount__v0.gcode",
"35426/gcode/tplink_poe_wall_mount__v1.gcode",
"35426/gcode/tplink_poe_wall_mount__v2.gcode",
"35426/gcode/tplink_poe_wall_mount__v3.gcode",
"35426/gcode/tplink_poe_wall_mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35426 | gcodes_0565.tar |
35496 | Inch cap for cubic tank | <p>this cap reduce tank thread to 1inch pipe thread for valve</p>
<h3>Print instructions</h3><p>If you want to print the cap without our website, you can just put the .stl into the slicer, but when you print it with our website, you must split it in mmu mode...</p> | [] | Household > Outdoor & Garden | [
"35496/images/98a8f59f-c3ea-4164-b2cc-a442b003c0f6.jpg",
"35496/images/cap.jpg"
] | [
"35496/gcode/cap__v0.gcode",
"35496/gcode/cap__v1.gcode",
"35496/gcode/cap__v2.gcode",
"35496/gcode/cap__v3.gcode",
"35496/gcode/cap__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/35496 | gcodes_0565.tar |
35375 | Apple Pencil Charging Dock | <p>I dislike clutter on my desk, so I made an Apple Pencil charging dock that attaches to the side of my monitor with 3M command strips [Large, see link below].</p>
<p>The dock sticks to a wall or any other surface and provides an organized way to store and charge the Apple Pencil, the cap, and the adapter. Your cap si... | [
"stand",
"wallmount",
"dock",
"charging",
"apple",
"monitor",
"chargingdock",
"wallmounted",
"thingiverse",
"chargingstation",
"chargingstand",
"monitormount",
"3mcommandstrips",
"3mcommand",
"applepencil",
"applepencilcap",
"applepencilholder",
"applepencilstand"
] | Gadgets > Other Gadgets | [
"35375/images/5edcb6c95ab8af61f0c69a4cbae3d8ca_display_large_3.jpg",
"35375/images/6eac5ff89da0d670091a15d33aca8348_display_large_3.jpg",
"35375/images/capture_35375.jpg",
"35375/images/9b116b77cb2adafe3906d90aef468c65_display_large_35.jpg",
"35375/images/f6a37c342c95a01b1d715a4be6d35f96_display_large_35.jp... | [
"35375/gcode/pencil_dock__v0.gcode",
"35375/gcode/pencil_dock__v1.gcode",
"35375/gcode/pencil_dock__v2.gcode",
"35375/gcode/pencil_dock__v3.gcode",
"35375/gcode/pencil_dock__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35375 | gcodes_0565.tar |
35354 | Zero Motorcycles Zero S Swingarm Frame Tube Cap | <p>This is a Frame Tube Cap the Zero Motorcycles Zero S Motorcycle.<br/>
You can use it to store things in the swingarm frame tube.<br/>
I printed it in TPU and stored my warning west in the tube. :)</p>
<p>It is a very snug fit with my Prusa MK3S, so maybe first print only one and see how it fits on your bike.</p>
<... | [
"thingiverse"
] | Hobby & Makers > Automotive | [
"35354/images/large_display_swingarm_frame_tube_cap_35354.jpg",
"35354/images/large_display_20-05-12_16-48-42_8436_35354.jpg"
] | [
"35354/gcode/swingarm_frame_tube_cap__v0.gcode",
"35354/gcode/swingarm_frame_tube_cap__v1.gcode",
"35354/gcode/swingarm_frame_tube_cap__v2.gcode",
"35354/gcode/swingarm_frame_tube_cap__v3.gcode",
"35354/gcode/swingarm_frame_tube_cap__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35354 | gcodes_0565.tar |
35176 | VESA Adapter for 30 inch Apple Cinema HD Display | <p>An adapter plate for the Apple Cinema Display (30 inch).</p>
<p>This is so you can use one of these old chunky monitors on a more useful stand!</p>
<p>You'll need to remove the stand that comes with the monitor, and save those two fancy looking screws on the side. You'll also need four M4 nuts to use in the screw ho... | [
"display",
"bracket",
"apple",
"adapter",
"screen",
"thingiverse",
"macintosh",
"vesa",
"cinema"
] | Gadgets > Computers | [
"35176/images/large_display_vesa_adapter_v2_35176.jpg"
] | [
"35176/gcode/vesa_adapter_v2__v0.gcode",
"35176/gcode/vesa_adapter_v2__v1.gcode",
"35176/gcode/vesa_adapter_v2__v2.gcode",
"35176/gcode/vesa_adapter_v2__v3.gcode",
"35176/gcode/vesa_adapter_v2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35176 | gcodes_0565.tar |
35160 | Corner-Mounted Shaver Holder | <p>Designed to mount in a corner with two 3M Command strips, this holder should fit a typical electric shaver. IT may fit yours, it may not, but print it (or measure it) and find out!</p>
<h3>Print instructions</h3><h3>Category: Bathroom Summary</h3>
<p>Designed to mount in a corner with two 3M Command strips, this hol... | [
"holder",
"corner",
"thingiverse",
"3mcommandstrips",
"electricshaver"
] | Household > Bathroom | [
"35160/images/9dedff064a025c3c28d3f014d9db52cd_display_large_35.jpg",
"35160/images/95b958f80879e389e2330b9de7093ac4_display_large_35.jpg"
] | [
"35160/gcode/shaver_holder__v0.gcode",
"35160/gcode/shaver_holder__v1.gcode",
"35160/gcode/shaver_holder__v2.gcode",
"35160/gcode/shaver_holder__v3.gcode",
"35160/gcode/shaver_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35160 | gcodes_0565.tar |
35138 | FTM-400 desktop stand | <p>Yaesu FTM-400 desktop stand</p>
<h3>Print instructions</h3><p>Unassociated tags: ftm 400, ham radio</p>
<h3>Category: Electronics Summary</h3>
<p>Yaesu FTM-400 desktop stand</p> | [
"thingiverse",
"yaesu",
"amateurfunk"
] | Hobby & Makers > Electronics | [
"35138/images/6486e463eae24f5472b3bfd2dc7b413e_display_large_35.jpg"
] | [
"35138/gcode/ftm400_stand__v0.gcode",
"35138/gcode/ftm400_stand__v1.gcode",
"35138/gcode/ftm400_stand__v2.gcode",
"35138/gcode/ftm400_stand__v3.gcode",
"35138/gcode/ftm400_stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35138 | gcodes_0565.tar |
35265 | Prusa Sized Artichoke Lamp Shade | <p>I like the design, but since my Prusa i3 MK2 has a max build height of 20cm I had to re-scale it a little. Since making it smaller would have also made the hole for the light socket too small that had to change too.</p>
<h3>Print instructions</h3><h3>Category: Decor Summary</h3>
<p>I like the design, but since my Pr... | [
"lampshade",
"thingiverse"
] | Household > Home Decor | [
"35265/images/e34e5341ada4ee0fc466068fb026b9d9_display_large_35.jpg"
] | [
"35265/gcode/artichokelampshade__v0.gcode",
"35265/gcode/artichokelampshade__v1.gcode",
"35265/gcode/artichokelampshade__v2.gcode",
"35265/gcode/artichokelampshade__v3.gcode",
"35265/gcode/artichokelampshade__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35265 | gcodes_0565.tar |
35018 | Microscope Stand Upgrade | <p>An upgraded stand for this popular and inexpensive USB microscope (Jiusion 1000x and similar).</p>
<p>The clamp that comes in in the kit it's way too flexible, making it really hard to focus. This upgrade uses a simple trick to hold the microscope steadier: the clamp itself gets tightened by the same screw mechanism... | [
"camera",
"stand",
"bracket",
"clamp",
"macro",
"endoscope",
"thingiverse",
"microscope",
"zoom",
"magnification",
"jiusion"
] | Hobby & Makers > Electronics | [
"35018/images/f7c472bd094bfd2f5498c11a586da785_display_large_35.jpg",
"35018/images/4341d42443cbed87ee0a1e9f85d8c34f_display_large_35.jpg",
"35018/images/d92debd768234dcdbb1b077844122e4b_display_large_35.jpg",
"35018/images/2b1b8ad7bbab2f43f5b4ac8fab9b5d60_display_large_35.jpg"
] | [
"35018/gcode/microscope__v0.gcode",
"35018/gcode/microscope__v1.gcode",
"35018/gcode/microscope__v2.gcode",
"35018/gcode/microscope__v3.gcode",
"35018/gcode/microscope__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35018 | gcodes_0565.tar |
33457 | Logitec C270 articulated arm to Ender 3 adapter | <p>This adapter connects an articulated arm, which holds a C270 webcam, to the frame of an Ender 3 Pro with the help of two T-nuts and two M3x10 screws.</p>
<p>Just print this adapter, and mount it to the left rail of your Ender 3 with two of these T-nuts:<br/>
<a href="https://www.thingiverse.com/thing:3050607">https:... | [
"logitechc270",
"ender3",
"thingiverse"
] | 3D Printers > Creality Parts & Upgrades | [
"33457/images/large_display_complete_camera_arm_on_ender_33457.jpg",
"33457/images/large_display_camera_arm_adapter_mounted_on_ender.jpg",
"33457/images/large_display_adapter_with_t-nuts_33457.jpg",
"33457/images/large_display_articulated_arm_to_ender_3_adapter_.jpg"
] | [
"33457/gcode/articulated_arm_to_ender_3_adapter__v0.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v1.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v2.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v3.gcode",
"33457/gcode/articulated_arm_to_ender_3_adapter__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33457 | gcodes_0565.tar |
33451 | Prusa i3 Mk3S extruder indicator | <p>This little extruder indicator was inspired by others with a similar design. They did not fully meet my needs, so I made my own.</p>
<p>My design specification included:</p>
<ul>
<li>indication needs to be unique over a 360° range, i.e. no repetitive pattern (which is really helpful if you watch via a camera live st... | [
"extruder",
"thingiverse"
] | 3D Printers > Prusa Parts & Upgrades | [
"33451/images/large_display_extruder_indicator_photo_33451.jpg",
"33451/images/large_display_bildschirmfoto_vom_2020-02-28_21-45.jpg",
"33451/images/large_display_extruder_indicator_33451.jpg"
] | [
"33451/gcode/extruder_indicator__v0.gcode",
"33451/gcode/extruder_indicator__v1.gcode",
"33451/gcode/extruder_indicator__v2.gcode",
"33451/gcode/extruder_indicator__v3.gcode",
"33451/gcode/extruder_indicator__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33451 | gcodes_0565.tar |
33405 | Arduino MKR series simple stand | <p>The new arduino form factor has long thin pins that are protected by a conductive foam inside of the box. This is a simple stand that covers and protect those pins.</p>
<h3>Print instructions</h3><h3>Category: Electronics Summary</h3>
<p>The new arduino form factor has long thin pins that are protected by a conducti... | [
"stand",
"arduino",
"arduinocase",
"thingiverse",
"mkr",
"mkr1000",
"mkr1500"
] | Hobby & Makers > Electronics | [
"33405/images/df0ef6aa88bdca77df722214f493878c_display_large_33.jpg",
"33405/images/cb18ac913b4e0d3942ed453208b3df1b_display_large_33.jpg",
"33405/images/32c567325611430dfcb6927542620324_display_large_33.jpg",
"33405/images/624781954fd5845171f868fdb26d3af2_display_large_33.jpg"
] | [
"33405/gcode/stand__v0.gcode",
"33405/gcode/stand__v1.gcode",
"33405/gcode/stand__v2.gcode",
"33405/gcode/stand__v3.gcode",
"33405/gcode/stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/33405 | gcodes_0565.tar |
35113 | Coin Holder for Swiss franc (CHF) | <p>Coin Holder for Swiss franc (CHF) to keep my change sorted. I've added 0.5mm tolerance to the coin diameter. Coins can't fall out at the front.</p>
<h3>Print instructions</h3><p>Filament: PETG<br/>
Color: Galaxy Black<br/>
Temps: 235°C / 85°C (first layer and the rest)<br/>
Layer height: 0.2mm (first layer and the r... | [
"holder",
"coin",
"stand"
] | Hobby & Makers > Organizers | [
"35113/images/img_20200622_083038.jpg",
"35113/images/img_20200621_230024.jpg"
] | [
"35113/gcode/coin_holder__v0.gcode",
"35113/gcode/coin_holder__v1.gcode",
"35113/gcode/coin_holder__v2.gcode",
"35113/gcode/coin_holder__v3.gcode",
"35113/gcode/coin_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35113 | gcodes_0565.tar |
35426 | TP-Link POE Wall Mount | <p>This wall mount is meant for the TP-Link TL-POE150S Injector, used for powering on a device with Power Over Ethernet while not having a compatible network plug available.</p>
<p>For testing purpose I printed this on a layer height of .3mm, however the result will be much better when printed with .10mm or .20mm layer... | [
"wall",
"mount",
"wallmount",
"thingiverse"
] | Household > Other House Equipment | [
"35426/images/large_display_img_1560_35426.jpg",
"35426/images/large_display_img_1557_35426.jpg",
"35426/images/large_display_img_1558_35426.jpg",
"35426/images/large_display_img_1555_35426.jpg",
"35426/images/large_display_img_1543_35426.jpg",
"35426/images/large_display_img_1544_35426.jpg",
"35426/ima... | [
"35426/gcode/tplink_poe_wall_mount__v0.gcode",
"35426/gcode/tplink_poe_wall_mount__v1.gcode",
"35426/gcode/tplink_poe_wall_mount__v2.gcode",
"35426/gcode/tplink_poe_wall_mount__v3.gcode",
"35426/gcode/tplink_poe_wall_mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35426 | gcodes_0565.tar |
35375 | Apple Pencil Charging Dock | <p>I dislike clutter on my desk, so I made an Apple Pencil charging dock that attaches to the side of my monitor with 3M command strips [Large, see link below].</p>
<p>The dock sticks to a wall or any other surface and provides an organized way to store and charge the Apple Pencil, the cap, and the adapter. Your cap si... | [
"stand",
"wallmount",
"dock",
"charging",
"apple",
"monitor",
"chargingdock",
"wallmounted",
"thingiverse",
"chargingstation",
"chargingstand",
"monitormount",
"3mcommandstrips",
"3mcommand",
"applepencil",
"applepencilcap",
"applepencilholder",
"applepencilstand"
] | Gadgets > Other Gadgets | [
"35375/images/5edcb6c95ab8af61f0c69a4cbae3d8ca_display_large_3.jpg",
"35375/images/6eac5ff89da0d670091a15d33aca8348_display_large_3.jpg",
"35375/images/capture_35375.jpg",
"35375/images/9b116b77cb2adafe3906d90aef468c65_display_large_35.jpg",
"35375/images/f6a37c342c95a01b1d715a4be6d35f96_display_large_35.jp... | [
"35375/gcode/pencil_dock__v0.gcode",
"35375/gcode/pencil_dock__v1.gcode",
"35375/gcode/pencil_dock__v2.gcode",
"35375/gcode/pencil_dock__v3.gcode",
"35375/gcode/pencil_dock__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35375 | gcodes_0565.tar |
35354 | Zero Motorcycles Zero S Swingarm Frame Tube Cap | <p>This is a Frame Tube Cap the Zero Motorcycles Zero S Motorcycle.<br/>
You can use it to store things in the swingarm frame tube.<br/>
I printed it in TPU and stored my warning west in the tube. :)</p>
<p>It is a very snug fit with my Prusa MK3S, so maybe first print only one and see how it fits on your bike.</p>
<... | [
"thingiverse"
] | Hobby & Makers > Automotive | [
"35354/images/large_display_swingarm_frame_tube_cap_35354.jpg",
"35354/images/large_display_20-05-12_16-48-42_8436_35354.jpg"
] | [
"35354/gcode/swingarm_frame_tube_cap__v0.gcode",
"35354/gcode/swingarm_frame_tube_cap__v1.gcode",
"35354/gcode/swingarm_frame_tube_cap__v2.gcode",
"35354/gcode/swingarm_frame_tube_cap__v3.gcode",
"35354/gcode/swingarm_frame_tube_cap__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35354 | gcodes_0565.tar |
35496 | Inch cap for cubic tank | <p>this cap reduce tank thread to 1inch pipe thread for valve</p>
<h3>Print instructions</h3><p>If you want to print the cap without our website, you can just put the .stl into the slicer, but when you print it with our website, you must split it in mmu mode...</p> | [] | Household > Outdoor & Garden | [
"35496/images/98a8f59f-c3ea-4164-b2cc-a442b003c0f6.jpg",
"35496/images/cap.jpg"
] | [
"35496/gcode/cap__v0.gcode",
"35496/gcode/cap__v1.gcode",
"35496/gcode/cap__v2.gcode",
"35496/gcode/cap__v3.gcode",
"35496/gcode/cap__v4.gcode"
] | GNU General Public License v3.0 | https://www.printables.com/model/35496 | gcodes_0565.tar |
35176 | VESA Adapter for 30 inch Apple Cinema HD Display | <p>An adapter plate for the Apple Cinema Display (30 inch).</p>
<p>This is so you can use one of these old chunky monitors on a more useful stand!</p>
<p>You'll need to remove the stand that comes with the monitor, and save those two fancy looking screws on the side. You'll also need four M4 nuts to use in the screw ho... | [
"display",
"bracket",
"apple",
"adapter",
"screen",
"thingiverse",
"macintosh",
"vesa",
"cinema"
] | Gadgets > Computers | [
"35176/images/large_display_vesa_adapter_v2_35176.jpg"
] | [
"35176/gcode/vesa_adapter_v2__v0.gcode",
"35176/gcode/vesa_adapter_v2__v1.gcode",
"35176/gcode/vesa_adapter_v2__v2.gcode",
"35176/gcode/vesa_adapter_v2__v3.gcode",
"35176/gcode/vesa_adapter_v2__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35176 | gcodes_0565.tar |
35160 | Corner-Mounted Shaver Holder | <p>Designed to mount in a corner with two 3M Command strips, this holder should fit a typical electric shaver. IT may fit yours, it may not, but print it (or measure it) and find out!</p>
<h3>Print instructions</h3><h3>Category: Bathroom Summary</h3>
<p>Designed to mount in a corner with two 3M Command strips, this hol... | [
"holder",
"corner",
"thingiverse",
"3mcommandstrips",
"electricshaver"
] | Household > Bathroom | [
"35160/images/9dedff064a025c3c28d3f014d9db52cd_display_large_35.jpg",
"35160/images/95b958f80879e389e2330b9de7093ac4_display_large_35.jpg"
] | [
"35160/gcode/shaver_holder__v0.gcode",
"35160/gcode/shaver_holder__v1.gcode",
"35160/gcode/shaver_holder__v2.gcode",
"35160/gcode/shaver_holder__v3.gcode",
"35160/gcode/shaver_holder__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35160 | gcodes_0565.tar |
35138 | FTM-400 desktop stand | <p>Yaesu FTM-400 desktop stand</p>
<h3>Print instructions</h3><p>Unassociated tags: ftm 400, ham radio</p>
<h3>Category: Electronics Summary</h3>
<p>Yaesu FTM-400 desktop stand</p> | [
"thingiverse",
"yaesu",
"amateurfunk"
] | Hobby & Makers > Electronics | [
"35138/images/6486e463eae24f5472b3bfd2dc7b413e_display_large_35.jpg"
] | [
"35138/gcode/ftm400_stand__v0.gcode",
"35138/gcode/ftm400_stand__v1.gcode",
"35138/gcode/ftm400_stand__v2.gcode",
"35138/gcode/ftm400_stand__v3.gcode",
"35138/gcode/ftm400_stand__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35138 | gcodes_0565.tar |
35426 | TP-Link POE Wall Mount | <p>This wall mount is meant for the TP-Link TL-POE150S Injector, used for powering on a device with Power Over Ethernet while not having a compatible network plug available.</p>
<p>For testing purpose I printed this on a layer height of .3mm, however the result will be much better when printed with .10mm or .20mm layer... | [
"wall",
"mount",
"wallmount",
"thingiverse"
] | Household > Other House Equipment | [
"35426/images/large_display_img_1560_35426.jpg",
"35426/images/large_display_img_1557_35426.jpg",
"35426/images/large_display_img_1558_35426.jpg",
"35426/images/large_display_img_1555_35426.jpg",
"35426/images/large_display_img_1543_35426.jpg",
"35426/images/large_display_img_1544_35426.jpg",
"35426/ima... | [
"35426/gcode/tplink_poe_wall_mount__v0.gcode",
"35426/gcode/tplink_poe_wall_mount__v1.gcode",
"35426/gcode/tplink_poe_wall_mount__v2.gcode",
"35426/gcode/tplink_poe_wall_mount__v3.gcode",
"35426/gcode/tplink_poe_wall_mount__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35426 | gcodes_0565.tar |
35375 | Apple Pencil Charging Dock | <p>I dislike clutter on my desk, so I made an Apple Pencil charging dock that attaches to the side of my monitor with 3M command strips [Large, see link below].</p>
<p>The dock sticks to a wall or any other surface and provides an organized way to store and charge the Apple Pencil, the cap, and the adapter. Your cap si... | [
"stand",
"wallmount",
"dock",
"charging",
"apple",
"monitor",
"chargingdock",
"wallmounted",
"thingiverse",
"chargingstation",
"chargingstand",
"monitormount",
"3mcommandstrips",
"3mcommand",
"applepencil",
"applepencilcap",
"applepencilholder",
"applepencilstand"
] | Gadgets > Other Gadgets | [
"35375/images/5edcb6c95ab8af61f0c69a4cbae3d8ca_display_large_3.jpg",
"35375/images/6eac5ff89da0d670091a15d33aca8348_display_large_3.jpg",
"35375/images/capture_35375.jpg",
"35375/images/9b116b77cb2adafe3906d90aef468c65_display_large_35.jpg",
"35375/images/f6a37c342c95a01b1d715a4be6d35f96_display_large_35.jp... | [
"35375/gcode/pencil_dock__v0.gcode",
"35375/gcode/pencil_dock__v1.gcode",
"35375/gcode/pencil_dock__v2.gcode",
"35375/gcode/pencil_dock__v3.gcode",
"35375/gcode/pencil_dock__v4.gcode"
] | Creative Commons — Attribution | https://www.printables.com/model/35375 | gcodes_0565.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.