text stringlengths 78 3.17k |
|---|
<｜begin▁of▁sentence｜>
### Instruction:
ANCP-4-MEM_THROTTLE
### Response:
(Severity: 4), (Category: IP), (Description: ANCP process has received an event that it's memory usage has reached its budgeted threshold. Continued increase in memory usage could result in restart of ANCP process.), (Recommended Action: If the me... |
<｜begin▁of▁sentence｜>
### Instruction:
PCIE-6-BUS_INFO_THRESHOLD_EXCEEDED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: A device has been detecting a PCIe bus error and it is exceeding threshold. The message has the device identification, error severity, and error type.), (Recommended Action: *RECUR*... |
<｜begin▁of▁sentence｜>
### Instruction:
FGID_AGG-3-ERR_EVM_CREATE
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID aggregator was unable to create an event manager for processing messages and hence failed to initialize. The System Manager process (sysmgr) will automatically respawn this process, u... |
<｜begin▁of▁sentence｜>
### Instruction:
How to troubleshoot an L2VPN not passing traffic?
### Response:
To troubleshoot an L2VPN not passing traffic, verify the xconnect status, check the interface and pseudowire status, and ensure correct encapsulation and MTU settings. show l2vpn xconnect
show interface GigabitEtherne... |
<｜begin▁of▁sentence｜>
### Instruction:
ES_ACL-6-ESACCESSLOGV
### Response:
None
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
How to configure BGP soft reconfiguration in IOS XR?
### Response:
BGP soft reconfiguration in IOS XR is configured to allow the router to store received routes without modifying the BGP table. router bgp 65000
neighbor 203.0.113.8
soft-reconfiguration inbound
commit
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
PLAT_L2FIB_LOCSW-7-INIT_ERROR
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the LOCSW module in the platform L2FIB LOCSW component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
CMPP-4-EXIT_FAILED
### Response:
(Severity: 4), (Category: INFRA), (Description: The specified process failed to notify the system manager that it was exiting. In very rare cases, this could result in the process not being restarted when it ought to be.), (Recommended Action: If t... |
<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_CW_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_CW_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is ... |
<｜begin▁of▁sentence｜>
### Instruction:
SMC-7-UNEXPECTED_VALUE
### Response:
(Severity: 7), (Category: SYSDB), (Description: The server has come across an unexpected value for the specified parameter.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the syst... |
<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_8_HIGH_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Tx power greater than or equal to the high Tx power alarm threshold. The CFP is the pluggable optics on the line cards. The Tx power thresh... |
<｜begin▁of▁sentence｜>
### Instruction:
CEMA-3-MISMATCH_ERR
### Response:
(Severity: 3), (Category: L2), (Description: A process on the line card that manages a SPA was restarted. As a part of restart, a mismatch was detected between user specified configuration and the actual configuration of SPA hardware.), (Recommend... |
<｜begin▁of▁sentence｜>
### Instruction:
ncs540l-1-RESTART_NOT_SUPPORTED_SUPPL
### Response:
(Severity: 1), (Category: PLATFORM), (Description: This is an error message associated with RESTART_NOT_SUPPORTED See RESTART_NOT_SUPPORTED for explanation), (Recommended Action: See RESTART_NOT_SUPPORTED for explanation)
<|EOT|>... |
<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_FI_INTR_RCTL0_HI_EOP_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_FI_INTR_RCTL0_HI_EOP_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure... |
<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_400G_POD-3-ASIC_ERR_INIT
### Response:
(Severity: 3), (Category: FABRIC), (Description: The sfe-drvr process cannot initialize the infrastructure allow error capturing function for the PODs on the fabric card.), (Recommended Action: If the message recurs, copy the error mes... |
<｜begin▁of▁sentence｜>
### Instruction:
ISIS-6-FAIL_ADJADD
### Response:
(Severity: 6), (Category: ROUTING), (Description: Failed to create adjacency to the displayed IS via the displayed interface for the reason specified.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant... |
<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the 'mpls traffic-eng tunnels' command in IOS XR?
### Response:
The 'mpls traffic-eng tunnels' command is used to enable MPLS Traffic Engineering on an interface. It allows the interface to be used as part of an MPLS TE tunnel path. MPLS TE tunnels are used ... |
<｜begin▁of▁sentence｜>
### Instruction:
SPMCE-3-ERR_KD_MMAP
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to mmap to Kernel dumper information in syspages.), (Recommended Action: This is a critical error which will cause process to restart for error recovery. Collect the syslog or console log. ... |
<｜begin▁of▁sentence｜>
### Instruction:
SLICE_MGR_PROXY-3-SYSDB_BIND_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Sysdb bind error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provid... |
<｜begin▁of▁sentence｜>
### Instruction:
ISLM-4-ENTITLED_SESSIONS_EXCEEDED
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This syslog is printed when the number of sessions is over the limit of the licenses available.), (Recommended Action: Install more licenses or move a license from another line car... |
<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_BDI_DEMD
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
LIBMIRROR-3-ERR_MEMORY
### Response:
(Severity: 3), (Category: MGBL), (Description: 'mirror encountered a memory error (most likely ran out of memory), see message for more details'), (Recommended Action: *SH_TECH*)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-ERR_INIT
### Response:
(Severity: 3), (Category: ROUTING), (Description: Error during initialization.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representat... |
<｜begin▁of▁sentence｜>
### Instruction:
PIM_MLDP_LIB-3-MLDP_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: An error occured while reading requests or processing a write request from the pim mldp consumer. The specific reason is provided in the message displayed. This message indicates that an error occu... |
<｜begin▁of▁sentence｜>
### Instruction:
SPMCE-0-ECC_REBOOT
### Response:
(Severity: 0), (Category: PLATFORM), (Description: Large numbers of single bit ECC errors have been detected on the sp node in the past hour. The node will be rebooted.), (Recommended Action: Copy the error message exactly as it appears on the cons... |
<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-6-PRINT_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Print the data for debug purpose or for change of states), (Recommended Action: The message is just for information. No action is needed.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
PRP_UPGRADE-3-PROC_AS_IO
### Response:
(Severity: 3), (Category: MGBL), (Description: IO failure on process address space. Unable to detect board type.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technica... |
<｜begin▁of▁sentence｜>
### Instruction:
LTRACE_SYNC-7-FILE_WRONG_VERSION
### Response:
(Severity: 7), (Category: OS), (Description: The file has wrong version.), (Recommended Action: Informational only.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
NP-2-TCAM_WRITE_PARITY_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A parity error interrupt), (Recommended Action: This error can be corrected by reloading the LC using the command: 'reload location <>'. If the message recurs, copy the error message exac... |
<｜begin▁of▁sentence｜>
### Instruction:
BULKSTAT-4-SEC_URL_UNREACHABLE
### Response:
(Severity: 4), (Category: SNMP), (Description: The Collected bulk data file could not be successfully transferred to the secondary network management station address destination specified in the error message. This condition can occur b... |
<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOL_DEMB
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
EMUX-1-LOSS_OF_SYNC_FIA10
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Loss of sync on interlaken interface on egress mux and fia 1), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error mess... |
<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-6-NMON_CFG_APPLIED
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This message indicates that node is configured in NMON (No MONitor) mode by the user and would not be reloaded by shelfmgr until restored back to MON config. Primary purpose of configuri... |
<｜begin▁of▁sentence｜>
### Instruction:
VIC-4-ENV_FAILURE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This message provides information about the fault occurred on the interface.), (Recommended Action: The message is just for information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
IPV4_MRIB-3-FGID_REMOVE_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representat... |
<｜begin▁of▁sentence｜>
### Instruction:
MPLS_TE-5-RSVP_FRR
### Response:
(Severity: 5), (Category: ROUTING), (Description: RSVP triggered FRR on an LSP.), (Recommended Action: None. This is a solicited message and is informative only.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
EMUX-3-RX_MAX_LEN_ERR_FIA10
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Packet maximum length error FIA 10 interface.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the ... |
<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK bias less than or equal to the low laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold value... |
<｜begin▁of▁sentence｜>
### Instruction:
PLAT_THOR_L2FIB_VPLS-3-CERR_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the cerrno module in the platform L2FIB component.), (Recommended Action: None, platform software will correct itself if this happens.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
BGP-4-PATH_ELEM_LIMIT
### Response:
(Severity: 4), (Category: ROUTING), (Description: An attempt was made to create a path element beyond the maximum limit. The advertisement and installation of the network in the BGP table may be inconsistent with additional-paths configuration.)... |
<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the protocol shutdown command in IS-IS?
### Response:
The protocol shutdown command is used to administratively shut down IS-IS on a router. When IS-IS is shut down, the router does not send or receive IS-IS packets and all IS-IS adjacencies are torn down. T... |
<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-3-FAB_MCAST_SC0_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A problem is detected by loopback test to the first Crossbar chip (chip#0) on this RSP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system... |
<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-LABEL_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occured while processing a label in the label table Most likely this is a fatal error. Only recovery is to restart the isis process), (Recommended Action: Copy the error message exactly as it... |
<｜begin▁of▁sentence｜>
### Instruction:
cds_proxy-3-PROC_ROLE_CHANGE
### Response:
(Severity: 3), (Category: OS), (Description: Failed to register the role change with the system manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical su... |
<｜begin▁of▁sentence｜>
### Instruction:
FIB-4-MPLS_UNSUPPORTED_BGP_LU_CHAIN
### Response:
(Severity: 4), (Category: ROUTING), (Description: In label create/update, bgp lu chain is invalid. Most often an intermediate state), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the c... |
<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB-3-WARNING_RT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the ASR9K platform FIB specific code software to indicate anomolies that are not FATAL. This error is most likely caused by a temporary situation, so is unlikely to r... |
<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-2-LOCKDOWN
### Response:
(Severity: 2), (Category: L2), (Description: A fatal error has caused the CPP driver to LOCKDOWN.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold>... |
<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-STATEMC_0_ERR2_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: State machine - 0 ran into error-2 on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, ... |
<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_0_HIGH_RX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ Rx power greater than or equal to the high Rx power warning threshold. The QSFP+ is the pluggable optics on the line cards. The R... |
<｜begin▁of▁sentence｜>
### Instruction:
ILITE-3-GET_CONFIG_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Unable to get configuration details, this may be a program level error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisc... |
<｜begin▁of▁sentence｜>
### Instruction:
PAKSRV-7-BADPTCL_DUMP
### Response:
(Severity: 7), (Category: PKT_INFRA), (Description: Particle body corruption is detected. This message follows a BADPAK message and dumps the first few bytes of the particle body and the last few bytes of the one before.), (Recommended Action: N... |
<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_LOS_PORTS1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-KEY_DEACTIVATE_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: A call to the Key Chain library failed. This may indicate an internal error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call you... |
<｜begin▁of▁sentence｜>
### Instruction:
gsp-3-INCORRECT_RSI
### Response:
(Severity: 3), (Category: OS), (Description: 'Received a RSI node id for a GSP group which is different than an expected value.'), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Ci... |
<｜begin▁of▁sentence｜>
### Instruction:
CHDLC_MA-4-ERR_PKT_API_HANDLER
### Response:
(Severity: 4), (Category: L2), (Description: A failure occured whilst handling an event received from the packet thread.), (Recommended Action: *RECUR*)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-3-HEALTH_CHK_FAIL
### Response:
(Severity: 3), (Category: SYSDB), (Description: Due to the error shown, sysdb cannot start the health check on sysDB sub system.), (Recommended Action: In most cases, this would be transient error. However, if this happens repeatedly, please c... |
<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_0_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_DISPARITY_ERROR_0 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command... |
<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-7-COUNT_HIGH
### Response:
(Severity: 7), (Category: SYSDB), (Description: SysDB connection count has crossed the threshold.), (Recommended Action: This might be normal. In case the process in message crashes, copy process core file and /tmp/sysdb_debug_conn_threshold_output... |
<｜begin▁of▁sentence｜>
### Instruction:
SYSLOG-1-LOG_ALERT
### Response:
(Severity: 1), (Category: OS), (Description: An Error message logged.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the represen... |
<｜begin▁of▁sentence｜>
### Instruction:
PLUTLU-3-PTMM_INIT_PROC_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error was encountered while initialising the PLU/TLU memory manager This condition can occur during: 1. Memory init 2. Checkpoint Init 3. PLU/TLU specific Init 4. EDM Init), (Recomme... |
<｜begin▁of▁sentence｜>
### Instruction:
FWD_NETIO_TOPAZ_DLL-3-INGRESSQ_CREATE_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: FWD was not able to create one of the ingressq queues.), (Recommended Action: No Action required Reduce other system activity to ease memory demands. If conditions warran... |
<｜begin▁of▁sentence｜>
### Instruction:
EVM-4-IONOTIFY_FAIL
### Response:
(Severity: 4), (Category: OS), (Description: Event-manager is unable to reregister for subsequent notifications with a server.), (Recommended Action: This is an internal error and should be reported to TAC if all attempts fail. Please collect the ... |
<｜begin▁of▁sentence｜>
### Instruction:
TEJAS_DRV-6-GENERIC_INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The message is used to report TEJAS DRIVER generic info.), (Recommended Action: Contact support.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_13_LOW_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshol... |
<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the install prepare command in IOS XR?
### Response:
The 'install prepare' command is used to prepare the system for an installation operation. It checks for available disk space, performs configuration checks, and determines which processes will be affected... |
<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-EDM_INIT_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: Initialization of the EDM server failed. The process will be restarted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco te... |
<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_UNSPEC_FAIL_5
### Response:
(Severity: 3), (Category: IP), (Description: IPv4 HoA request option is not received in the PBU. This happens if the service configured for the MN on the LMA is IPv4 or Dual and that on the MAG is not matching.), (Recommended Action: Note th... |
<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-PHY_OPTICS_SERDES_FAULT
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Serdes signal fault detected/cleared between phy and optics.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco t... |
<｜begin▁of▁sentence｜>
### Instruction:
SPM-3-ERROR_OPEN_SECURE
### Response:
(Severity: 3), (Category: SECURITY), (Description: An attempt to open a secure file failed.), (Recommended Action: 'Retry the operation. If this message recurs, Copy the error message exactly as it appears on the console or in the system log, ... |
<｜begin▁of▁sentence｜>
### Instruction:
SPB_I2C-7-BUS_UNHANG_SUCCESS
### Response:
(Severity: 7), (Category: PLATFORM), (Description: The I2C bus hang has been cleared successfully. I2C communication is restored on the bus.), (Recommended Action: 'No action is required.')
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
CCV-5-INVALID_VLDN_METADATA
### Response:
(Severity: 5), (Category: MGBL), (Description: This failure indicates that some validation metadata present on the device could not be loaded. This is typically indicative of validation rules that reference a schema path in an optional pac... |
<｜begin▁of▁sentence｜>
### Instruction:
ICPE_GCO-5-TRANSFER_FAILED
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: Failed to copy the specified file onto the host. Run 'show nv satellite install verbose' for more information.), (Recommended Action: Check the specified file exists, and if it is on a rem... |
<｜begin▁of▁sentence｜>
### Instruction:
RLOGIND-6-INFO_GENERAL
### Response:
(Severity: 6), (Category: IP), (Description: The rlogind encountered some problem in genric nature or plain information.), (Recommended Action: 'No action is required.')
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-HOST_ERROR_EVENT
### Response:
(Severity: 3), (Category: DRIVER), (Description: HOST has reported a error event.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and prov... |
<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_MPLS-3-ERR_STR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: A runtime failure occurred in FIB engine layer. Typically, this is an internal error. The message string indicates the reason for the failure. This message also provides an error code and a st... |
<｜begin▁of▁sentence｜>
### Instruction:
PLAT_FIB_GTRIE-3-ERR_INFO
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the ASR9K platform FIB specific code software to indicate anomolies that are not FATAL. This error is most likely caused by a temporary situation, so is unlikely ... |
<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-CPU_PKT_F3_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: IBS from CPU packet FIFO 3 single bit error.), (Recommended Action: None.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
MRIB-4-FILTRVIOLERR
### Response:
(Severity: 4), (Category: ROUTING), (Description: A client tried to modify a route attribute not owned by it), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-supp... |
<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTQ2
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
FDI-3-ERR_TLV_HDR
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB/Driver encountered a FDI message containing structure(s) which do not have a TLV header, or the message is too short to contain the structure(s) specified in the TLV header. This means that the T... |
<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-MGMT_HOST_IP_ERROR
### Response:
(Severity: 3), (Category: MGBL), (Description: The show line command was unable to get the host IP address.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical sup... |
<｜begin▁of▁sentence｜>
### Instruction:
DIAGS-3-INVALID_DEVICE_ID
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Device identity readback value is incorrect), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support represe... |
<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGR_HAL-6-CARD_POWERDOWN
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The Shelf Manager component has requested power disable on a line card or secondary RSP.), (Recommended Action: No action is required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_10_LOW_BIAS_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias thre... |
<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-BAD_DOI_NOTIFY
### Response:
(Severity: 3), (Category: SECURITY), (Description: IKE found bad DOI notify), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the... |
<｜begin▁of▁sentence｜>
### Instruction:
IPV6_ACL-1-IPACCESSDLSYM
### Response:
(Severity: 1), (Category: ACL), (Description: This message indicates that a process could not find the specified DLL name. The name of this DLL is included in the message. Functionalites of the process that failed to load this DLL will be imp... |
<｜begin▁of▁sentence｜>
### Instruction:
TCP_NSR-3-OUT_OF_SYNC
### Response:
(Severity: 3), (Category: IP), (Description: One or more control messages could not be delivered, after several retries, to the partner TCP stack. This can leave the TCP stacks in a state that prevents NSR from being restored. However, periodic ... |
<｜begin▁of▁sentence｜>
### Instruction:
ISSUDIR-4-OPERATION_ISSU_ABORT_DONE_REMINDER
### Response:
(Severity: 4), (Category: INSTALL), (Description: This message acts as a reminder that the ISSU has been held following an abort to enable system level triage.), (Recommended Action: The ISSU has been held following an abo... |
<｜begin▁of▁sentence｜>
### Instruction:
DIAG-3-SW_FAIL
### Response:
(Severity: 3), (Category: DIAG), (Description: An internal software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the screen and gather the output of show tech-support and any other relevant information. Contact... |
<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of BGP soft reconfiguration?
### Response:
BGP soft reconfiguration allows the router to store a copy of the routes received from a neighbor before any inbound policy is applied. If the inbound policy is changed, the stored routes can be re-evaluated without te... |
<｜begin▁of▁sentence｜>
### Instruction:
MLAP-3-WHITEBOX_EP_DI_MISMATCH_DETECTED
### Response:
(Severity: 3), (Category: INFRA), (Description: Rx and Tx links terminate on different endpoint ports.), (Recommended Action: Determine if the event was due to a fault. If so, the root cause need wiring/connectivity check.)
<|E... |
<｜begin▁of▁sentence｜>
### Instruction:
CCC-4-BENCH_MODE_DETECTED
### Response:
(Severity: 4), (Category: DRIVER), (Description: The BENCH MODE is used for debugging the card out of the chassis, the jumper or DIP switch to enable this feature should not be set if the card is being inserted in the chassis.), (Recommended... |
<｜begin▁of▁sentence｜>
### Instruction:
LISP-5-PROXY_ETR_REACHABILITY_CHANGE
### Response:
(Severity: 5), (Category: IP), (Description: 'No route to reach proxy ETR so traffic drop is expected.'), (Recommended Action: 'Ensure router has connectivity to proxy ETR.')
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
INBAR_HB-7-ERR_EVM_CREATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while attempting to create an event manager. This failures affects the ability of the process to service various messages / pulses from other threads / proce... |
<｜begin▁of▁sentence｜>
### Instruction:
DAD-3-SYSDB_DELETE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: The DAD library attempts to delete the old protocol information before writing out the new information. This delete operation failed for the above reason.), (Recommended Action: restart policy_... |
<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-UPGRADE_CFP2_LASER_ON
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Cannot do FPD upgrade of CFP2 when its laser is on.), (Recommended Action: Shut the Optics Controller corresponding to this CFP2 and try upgrade again.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-2-MAC_0_RX_FRAME_ERR_3
### Response:
(Severity: 2), (Category: PLATFORM), (Description: MAC on NPU-0 received an errored frame interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If th... |
<｜begin▁of▁sentence｜>
### Instruction:
BACKUPSSHD-3-ERR_SYSDB_DELETE
### Response:
(Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the... |
<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_CFGMGR_ADD_DELETES
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console o... |
<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-IN_BUF_CRC_ERROR_LNK0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected excessive input buffer CRC error on link 0), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN stat... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.