text stringlengths 78 3.17k |
|---|
<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-CRS_X_FABRIC_VOLTAGE_SUPPLY_FAILED
### Response:
(Severity: 2), (Category: PLATFORM), (Description: As soon as power is asserted on fabric card, s/w will read power good reister for crs-x fabric cards. If power good register bots are low, it indicates that the crs-x fabric c... |
<｜begin▁of▁sentence｜>
### Instruction:
QAD_SERVER-3-SYSMGR_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Sysmgr proc ready operation failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and pr... |
<｜begin▁of▁sentence｜>
### Instruction:
DPFPGA-6-FIFO_BUFFER_WARNING
### Response:
(Severity: 6), (Category: PLATFORM), (Description: DPFPGA FIFO for the corresponding port is in stuck state), (Recommended Action: Relaod the node to reuse the port)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
BCDL-3-MSG_DLL_OPEN
### Response:
(Severity: 3), (Category: OS), (Description: The interface library is not availble.), (Recommended Action: Contact support.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-ERR_TAG_NAME
### Response:
(Severity: 3), (Category: ROUTING), (Description: An IS-IS process failed to retrieve its process tag name during process initialization. This is a fatal software error and the IS-IS process will abort.), (Recommended Action: Copy the error messag... |
<｜begin▁of▁sentence｜>
### Instruction:
APPMGR-3-RELAY_RECOVERY_FAILED
### Response:
(Severity: 3), (Category: INFRA), (Description: The IOS-XR appmgr was unable to recover an relay belonging to the specified application after a reload or switchover event.), (Recommended Action: Inspect the error information and reactiv... |
<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-MSG_GET_CHAN_CHAN
### Response:
(Severity: 3), (Category: HA), (Description: An internal error was detected when trying to get channel id from a channel handler.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call y... |
<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-3-CNET_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: open_cnet failed. %s- Failed reason. %x- Return value.), (Recommended Action: *SUPPORT*)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
BFD-6-SESSION_BUNDLE_ALL_MEMBER_OFF
### Response:
(Severity: 6), (Category: L2), (Description: The specified BFD session is not running in all member mode.), (Recommended Action: No action is required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
SRG-3-MGR_INIT_FAIL
### Response:
(Severity: 3), (Category: SUBSCRIBER), (Description: An error occurred during initialization, causing SRG Manager process to abort and it will be restarted to attempt to resolve the issue.), (Recommended Action: Contact Technical Support. No impac... |
<｜begin▁of▁sentence｜>
### Instruction:
TYPE6-6-MK_OPERATION_TIMEOUT
### Response:
(Severity: 6), (Category: SECURITY), (Description: It show the Masterkey operation (create/update/delete) was started on system but it is not finished yet. Please run 'show type6 client' to check which type6 clients has not finished the o... |
<｜begin▁of▁sentence｜>
### Instruction:
BGP-3-BPM_SWITCH_MODE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An error occurred when switching between standalone and distributed mode.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco ... |
<｜begin▁of▁sentence｜>
### Instruction:
LICMGR-6-LOAD_LICENSE_FILE
### Response:
(Severity: 6), (Category: LICENSE), (Description: The license manager is about to open the named license file to add licenses to the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system... |
<｜begin▁of▁sentence｜>
### Instruction:
REDDRV-5-GO_STANDBY
### Response:
(Severity: 5), (Category: PLATFORM), (Description: Card is becoming standby.), (Recommended Action: No action required, just informational message.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-UPGRADE_LICENSE_NOT_AUTHORIZED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The authorization code installed does not contain the requested entitlement tag The authorization code installed does not contain enough counts to satisfy the request. Soft... |
<｜begin▁of▁sentence｜>
### Instruction:
DPA_FM-3-MATCH_TYPE_IN_ACL_NOT_SUPPORTED_DIR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: The match criteria specified is not supported in an ACL for this type/direction of ACL.), (Recommended Action: Remove the match criteria from the ACL and re-apply.)
<|EOT... |
<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LSD-3-MULTI_IP_FPI_RW
### Response:
(Severity: 3), (Category: ROUTING), (Description: Rewrite creation or modification failed due to presence of multiple IP route elements.), (Recommended Action: Collect LSD traces)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-ERR_THREAD_COND_WAIT
### Response:
(Severity: 3), (Category: MGBL), (Description: 'The call to wait on a condition failed. The error is displayed in the message'), (Recommended Action: *SH_TECH*)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-SOFT_ERROR_ALERT_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Soft error detected on Bridge FGPA instance 1.), (Recommended Action: Please reload the board in the next maintenance window. Until then affected ports will be down. 'reload location <>'. ... |
<｜begin▁of▁sentence｜>
### Instruction:
NP-4-COLD_RESET_FAILED
### Response:
(Severity: 4), (Category: PLATFORM), (Description: This is an error message in the NP Driver to indicate that it failed to perform cold reset of specified NP instance due to the specified reason.), (Recommended Action: No action is required.)
<... |
<｜begin▁of▁sentence｜>
### Instruction:
PLDMGR-2-CLIENT_ERROR
### Response:
(Severity: 2), (Category: PLATFORM), (Description: PLDMGR client reports a catastrophic error with error id.), (Recommended Action: All the necessary information is stored in PCDS. We can dump PCDS information using pcds_decode command from the ... |
<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature thre... |
<｜begin▁of▁sentence｜>
### Instruction:
netio_debug-4-ASYNC_HANDLER
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The NetIO debugging partner process couldn't install the default event handler for async messages.), (Recommended Action: NetIO debugging partner process is only needed to capture/log pac... |
<｜begin▁of▁sentence｜>
### Instruction:
VERSMGR_LIB-7-SYSDB_REGISTER
### Response:
(Severity: 7), (Category: INSTALL), (Description: A Version Manager library was unable to register with SysDB, so will not be able to function. Installations will be unlikely to produce the expected results.), (Recommended Action: Copy th... |
<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-SYS_UPGRADE_FAILURE
### Response:
(Severity: 3), (Category: INSTALL), (Description: Specified install operation in the error message failed. This message will be sent by the Admin install manager with proper reason for the failure.), (Recommended Action: The reason for t... |
<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-BADOPTION
### Response:
(Severity: 4), (Category: MGBL), (Description: The command option is invalid), (Recommended Action: Re-enter the command. (Use the help command to find valid options.) If the message recurs, copy the error message exactly as it appears on the conso... |
<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_5_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_5 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'relo... |
<｜begin▁of▁sentence｜>
### Instruction:
CCTL-6-TEMP_ALARM
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Informational msg indicating temperature at which alarm occured.), (Recommended Action: Temprature sensor value crossed the threshold mentioned in the message.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
COREHELPER-3-BLOCK_EVENT_ERROR
### Response:
(Severity: 3), (Category: OS), (Description: Received specified error from event_block API.), (Recommended Action: Check corehelper process, collect console logs, show context. Report this message to TAC.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
How to monitor MPLS L3VPN VRF BGP session state?
### Response:
To monitor MPLS L3VPN VRF BGP session state, use the 'show bgp vpnv4 unicast vrf MyVRF summary' command. show bgp vpnv4 unicast vrf MyVRF summary
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
VS_CLIENT-3-NOTIFICATION
### Response:
(Severity: 3), (Category: INSTALL), (Description: Test code only - will never be seen by customers.), (Recommended Action: --)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR_LIB-2-RELOAD_SAVE_CONFIG_FAILED
### Response:
(Severity: 2), (Category: INSTALL), (Description: Configuration will be lost during the reload of the installation if both of the following apply 1. Binary configurations are not compatible between the current software and the ... |
<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_AAA_SESSION
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the AAA iEDGE service. The error message describes what operation has failed and why it failed. The most likely reason for this is that the AAA iEDGE server is una... |
<｜begin▁of▁sentence｜>
### Instruction:
IFMGR-6-LWM_UNEXPECTED_PULSE
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: This error message indicates that a pulse has been delivered to the event manager in the IM client library which was intended for someone else. This is almost certainly harmless in this ... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.