ngram
listlengths 0
9.89k
|
|---|
[
"nozzle, then bed recalibration. I have a filament dryer, and",
"which I’ve found to be a fantastic out of the",
"printer obviously carries on like all is ok, but there’s",
"it’s roller bearings. I recently keep getting prints where they",
"to force filament down the bowden tube. With harder filaments",
"as pitting you get in a soldering iron tip surely…",
"fantastic out of the box ready to go printer. I’ve",
"layer 10, the extrusion simply stops. The printer obviously carries",
"it. I’ve had issues where the nozzle was too close",
"go printer. I’ve clocked up 500 hours on it. I’ve",
"print bed, making it impossible for the extruder wheel to",
"longer pushing. I have to take the then baked filament",
"bowden tube. With harder filaments that results in clicking as",
"the nozzle, then bed recalibration. I have a filament dryer,",
"hobbed gear as @fred_dot_u suggested](https://i.stack.imgur.com/IdDcQ.jpg)](https://i.stack.imgur.com/IdDcQ.jpg) [](https://i.stack.imgur.com/IdDcQ.jpg) [](https://i.stack.imgur.com/IdDcQ.jpg) [](https://i.stack.imgur.com/IdDcQ.jpg) [](https://i.stack.imgur.com/IdDcQ.jpg) [](https://i.stack.imgur.com/IdDcQ.jpg)",
"to go printer. I’ve clocked up 500 hours on it.",
"a new nozzle? I don’t understand how a metal nozzle",
"a soldering iron tip surely… [](https://i.stack.imgur.com/IdDcQ.jpg) [](https://i.stack.imgur.com/IdDcQ.jpg) [](https://i.stack.imgur.com/IdDcQ.jpg) [](https://i.stack.imgur.com/EFz2Q.jpg)",
"bed, making it impossible for the extruder wheel to force",
"be? Do I just need a new nozzle? I don’t",
"don’t understand how a metal nozzle printing plastic can deteriorate",
"it’s just wearing a groove and no longer pushing. I",
"same way. It’ll start out ok then the extrusion seems",
"down the bowden tube. With harder filaments that results in",
"in clicking as it’s cog is skipping. With softer, usually",
"every time I’m printing as it’s a perfect dispenser with",
"The printer obviously carries on like all is ok, but",
"just wearing a groove and no longer pushing. I have",
"a groove and no longer pushing. I have to take",
"box ready to go printer. I’ve clocked up 500 hours",
"usually matte PLA it’s just wearing a groove and no",
"extruder wheel to force filament down the bowden tube. With",
"then baked filament and manually push it out of the",
"skipping. With softer, usually matte PLA it’s just wearing a",
"I have to take the then baked filament and manually",
"on like all is ok, but there’s not even spaghetti.",
"is skipping. With softer, usually matte PLA it’s just wearing",
"then after about layer 10, the extrusion simply stops. The",
"to take the then baked filament and manually push it",
"ok, but there’s not even spaghetti. What could this be?",
"It’s not the same as pitting you get in a",
"was too close to the print bed, making it impossible",
"of hobbed gear as @fred_dot_u suggested](https://i.stack.imgur.com/IdDcQ.jpg)](https://i.stack.imgur.com/IdDcQ.jpg) [![Failed print. I’ve had",
"hours on it. I’ve had issues where the nozzle was",
"the nozzle was too close to the print bed, making",
"tube. With harder filaments that results in clicking as it’s",
"the box ready to go printer. I’ve clocked up 500",
"nozzle? I don’t understand how a metal nozzle printing plastic",
"recently keep getting prints where they start out perfect, but",
"stops. The printer obviously carries on like all is ok,",
"take the then baked filament and manually push it out",
"not the same as pitting you get in a soldering",
"I’ve had issues where the nozzle was too close to",
"bearings. I recently keep getting prints where they start out",
"a metal nozzle printing plastic can deteriorate it. It’s not",
"a fantastic out of the box ready to go printer.",
"pitting you get in a soldering iron tip surely… [![Edited",
"500 hours on it. I’ve had issues where the nozzle",
"baked filament and manually push it out of the nozzle,",
"What could this be? Do I just need a new",
"but there’s not even spaghetti. What could this be? Do",
"spaghetti. What could this be? Do I just need a",
"the extrusion simply stops. The printer obviously carries on like",
"I just need a new nozzle? I don’t understand how",
"the same as pitting you get in a soldering iron",
"with it’s roller bearings. I recently keep getting prints where",
"you get in a soldering iron tip surely… [![Edited with",
"plastic can deteriorate it. It’s not the same as pitting",
"matte PLA it’s just wearing a groove and no longer",
"the print bed, making it impossible for the extruder wheel",
"several fail the same way. It’ll start out ok then",
"can deteriorate it. It’s not the same as pitting you",
"dryer, and use it every time I’m printing as it’s"
] |
[
"plastics used for 3D printing? The material safety data sheet",
"data sheet of some PLA plastics indicates low risks at",
"are > mechanically irritating to eyes. Ingestion may cause gastrointestinal",
"safety data sheet of some PLA plastics indicates low risks",
"of the chest, a sore throat and cough. Burning produces",
"> > --- > > > PRINCIPLE ROUTES OF EXPOSURE:",
"there any safety risks inherent to PLA plastics used for",
"cause gastrointestinal irritation, nausea, vomiting and > diarrhea. Inhalation of",
"> > > --- > > > SECTION 11: TOXICOLOGICAL",
"> > CARCINOGENIC EFFECTS: None of the components of this",
"any safety risks inherent to PLA plastics used for 3D",
"mechanically irritating to eyes. Ingestion may cause gastrointestinal > irritation,",
"inherent to PLA plastics used for 3D printing? The material",
"risks at a toxicological level, but I'd like to make",
"indicates low risks at a toxicological level, but I'd like",
"SPECIFIC EFFECTS: May cause skin irritation and/or dermatitis. > Ingestion",
"and > diarrhea. Inhalation of dust may cause shortness of",
"vomiting and diarrhea. > > > SPECIFIC EFFECTS: May cause",
"> > PRINCIPLE ROUTES OF EXPOSURE: Eye contact, Skin contact,",
"> irritation, nausea, vomiting and diarrhea. > > > SPECIFIC",
"irritation, nausea, vomiting and > diarrhea. Inhalation of dust may",
"> of the chest, a sore throat and cough. Burning",
"during use. > LOCAL EFFECTS: Product dust may be irritating",
"noted during use. > LOCAL EFFECTS: Product dust may be",
"other inert materials, are > mechanically irritating to eyes. Ingestion",
"components of this product are > listed as carcinogens by",
"use. > > > REPRODUCTIVE TOXICITY: No data is available",
"Product dust may be irritating to eyes, skin and >",
"gastrointestinal irritation, nausea, vomiting and > diarrhea. Inhalation of dust",
"ROUTES OF EXPOSURE: Eye contact, Skin contact, Inhalation, Ingestion. >",
"> SPECIFIC EFFECTS: May cause skin irritation and/or dermatitis. >",
"nausea, vomiting and diarrhea. > > > SPECIFIC EFFECTS: May",
"materials, are > mechanically irritating to eyes. Ingestion may cause",
"respiratory system. Particles, like other inert materials, are > mechanically",
"vomiting and > diarrhea. Inhalation of dust may cause shortness",
"> --- > > > PRINCIPLE ROUTES OF EXPOSURE: Eye",
"> ACUTE TOXICITY: None noted during use. > LOCAL EFFECTS:",
"printing? The material safety data sheet of some PLA plastics",
"The material safety data sheet of some PLA plastics indicates",
"plastics indicates low risks at a toxicological level, but I'd",
"to make sure some other factor isn't overlooked. ([1](https://printparts.com/datasheets/PLA-MSDS.pdf), [2](https://www.nhh.com.hk/en/3dprinting/document/pla_classic/MSDS_PLA_Classic.pdf),",
"may cause gastrointestinal > irritation, nausea, vomiting and diarrhea. >",
"may be irritating to eyes, skin and > respiratory system.",
"this product are > listed as carcinogens by IARC, NTP,",
"TOXICOLOGICAL INFORMATION > > > --- > > > PRINCIPLE",
"irritant > fumes. > > > CHRNOIC TOXICITY: None noted",
"> > > --- > > > PRINCIPLE ROUTES OF",
"contact, Inhalation, Ingestion. > ACUTE TOXICITY: None noted during use.",
"irritating to eyes, skin and > respiratory system. Particles, like",
"and cough. Burning produces irritant > fumes. > > >",
"Eye contact, Skin contact, Inhalation, Ingestion. > ACUTE TOXICITY: None",
"itself. > > CARCINOGENIC EFFECTS: None of the components of",
"as carcinogens by IARC, NTP, or OSHA. > > >",
"> > SPECIFIC EFFECTS: May cause skin irritation and/or dermatitis.",
"eyes, skin and > respiratory system. Particles, like other inert",
"EXPOSURE: Eye contact, Skin contact, Inhalation, Ingestion. > ACUTE TOXICITY:",
"and > respiratory system. Particles, like other inert materials, are",
"data is available on the product itself. > > CARCINOGENIC",
"TOXICITY: None noted during use. > > > REPRODUCTIVE TOXICITY:",
"Ingestion may cause gastrointestinal > irritation, nausea, vomiting and diarrhea.",
"diarrhea. Inhalation of dust may cause shortness of breath, tightness",
"--- > > > PRINCIPLE ROUTES OF EXPOSURE: Eye contact,",
"at a toxicological level, but I'd like to make sure",
"EFFECTS: None of the components of this product are >",
"--- > > > SECTION 11: TOXICOLOGICAL INFORMATION > >",
"CHRNOIC TOXICITY: None noted during use. > > > REPRODUCTIVE",
"> Ingestion may cause gastrointestinal irritation, nausea, vomiting and >",
"listed as carcinogens by IARC, NTP, or OSHA. > >",
"like other inert materials, are > mechanically irritating to eyes.",
"safety risks inherent to PLA plastics used for 3D printing?",
"overlooked. ([1](https://printparts.com/datasheets/PLA-MSDS.pdf), [2](https://www.nhh.com.hk/en/3dprinting/document/pla_classic/MSDS_PLA_Classic.pdf), [3](http://wwwassets.e-ci.com/PDF/SDS/CI-D-07-PLA-3D-Printing-Filament.pdf)) > > > > --- >",
"> > CHRNOIC TOXICITY: None noted during use. > >",
"sure some other factor isn't overlooked. ([1](https://printparts.com/datasheets/PLA-MSDS.pdf), [2](https://www.nhh.com.hk/en/3dprinting/document/pla_classic/MSDS_PLA_Classic.pdf), [3](http://wwwassets.e-ci.com/PDF/SDS/CI-D-07-PLA-3D-Printing-Filament.pdf)) >",
"OF EXPOSURE: Eye contact, Skin contact, Inhalation, Ingestion. > ACUTE",
"of the components of this product are > listed as",
"available on the product itself. > > CARCINOGENIC EFFECTS: None",
"sheet of some PLA plastics indicates low risks at a",
"the product itself. > > CARCINOGENIC EFFECTS: None of the",
"Ingestion. > ACUTE TOXICITY: None noted during use. > LOCAL",
"use. > LOCAL EFFECTS: Product dust may be irritating to",
"of breath, tightness > of the chest, a sore throat",
"3D printing? The material safety data sheet of some PLA",
"> --- > > > SECTION 11: TOXICOLOGICAL INFORMATION >",
"REPRODUCTIVE TOXICITY: No data is available on the product itself.",
"Burning produces irritant > fumes. > > > CHRNOIC TOXICITY:",
"cause gastrointestinal > irritation, nausea, vomiting and diarrhea. > >",
"cough. Burning produces irritant > fumes. > > > CHRNOIC",
"None of the components of this product are > listed",
"Inhalation, Ingestion. > ACUTE TOXICITY: None noted during use. >",
"are > listed as carcinogens by IARC, NTP, or OSHA.",
"to PLA plastics used for 3D printing? The material safety",
"and diarrhea. > > > SPECIFIC EFFECTS: May cause skin",
"diarrhea. > > > SPECIFIC EFFECTS: May cause skin irritation",
"PLA plastics used for 3D printing? The material safety data",
"of this product are > listed as carcinogens by IARC,",
"noted during use. > > > REPRODUCTIVE TOXICITY: No data",
"low risks at a toxicological level, but I'd like to",
"system. Particles, like other inert materials, are > mechanically irritating",
"> > REPRODUCTIVE TOXICITY: No data is available on the",
"May cause skin irritation and/or dermatitis. > Ingestion may cause",
"fumes. > > > CHRNOIC TOXICITY: None noted during use.",
"factor isn't overlooked. ([1](https://printparts.com/datasheets/PLA-MSDS.pdf), [2](https://www.nhh.com.hk/en/3dprinting/document/pla_classic/MSDS_PLA_Classic.pdf), [3](http://wwwassets.e-ci.com/PDF/SDS/CI-D-07-PLA-3D-Printing-Filament.pdf)) > > > >",
"> > --- > > > SECTION 11: TOXICOLOGICAL INFORMATION",
"sore throat and cough. Burning produces irritant > fumes. >",
"CARCINOGENIC EFFECTS: None of the components of this product are",
"> > > CHRNOIC TOXICITY: None noted during use. >",
"> CHRNOIC TOXICITY: None noted during use. > > >",
"Inhalation of dust may cause shortness of breath, tightness >",
"but I'd like to make sure some other factor isn't",
"during use. > > > REPRODUCTIVE TOXICITY: No data is",
"skin irritation and/or dermatitis. > Ingestion may cause gastrointestinal irritation,",
"a sore throat and cough. Burning produces irritant > fumes.",
"cause skin irritation and/or dermatitis. > Ingestion may cause gastrointestinal",
"other factor isn't overlooked. ([1](https://printparts.com/datasheets/PLA-MSDS.pdf), [2](https://www.nhh.com.hk/en/3dprinting/document/pla_classic/MSDS_PLA_Classic.pdf), [3](http://wwwassets.e-ci.com/PDF/SDS/CI-D-07-PLA-3D-Printing-Filament.pdf)) > > >",
"irritation and/or dermatitis. > Ingestion may cause gastrointestinal irritation, nausea,",
"> > > SECTION 11: TOXICOLOGICAL INFORMATION > > >",
"on the product itself. > > CARCINOGENIC EFFECTS: None of",
"SECTION 11: TOXICOLOGICAL INFORMATION > > > --- > >",
"TOXICITY: No data is available on the product itself. >",
"> > SECTION 11: TOXICOLOGICAL INFORMATION > > > ---",
"> > > REPRODUCTIVE TOXICITY: No data is available on",
"Are there any safety risks inherent to PLA plastics used",
"> listed as carcinogens by IARC, NTP, or OSHA. >",
"11: TOXICOLOGICAL INFORMATION > > > --- > > >",
"> diarrhea. Inhalation of dust may cause shortness of breath,",
"None noted during use. > > > REPRODUCTIVE TOXICITY: No",
"of dust may cause shortness of breath, tightness > of",
"like to make sure some other factor isn't overlooked. ([1](https://printparts.com/datasheets/PLA-MSDS.pdf),",
"LOCAL EFFECTS: Product dust may be irritating to eyes, skin",
"EFFECTS: Product dust may be irritating to eyes, skin and",
"skin and > respiratory system. Particles, like other inert materials,",
"dust may cause shortness of breath, tightness > of the",
"tightness > of the chest, a sore throat and cough.",
"nausea, vomiting and > diarrhea. Inhalation of dust may cause",
"some PLA plastics indicates low risks at a toxicological level,",
"used for 3D printing? The material safety data sheet of",
"> > > PRINCIPLE ROUTES OF EXPOSURE: Eye contact, Skin",
"> > > SPECIFIC EFFECTS: May cause skin irritation and/or",
"isn't overlooked. ([1](https://printparts.com/datasheets/PLA-MSDS.pdf), [2](https://www.nhh.com.hk/en/3dprinting/document/pla_classic/MSDS_PLA_Classic.pdf), [3](http://wwwassets.e-ci.com/PDF/SDS/CI-D-07-PLA-3D-Printing-Filament.pdf)) > > > > ---",
"[3](http://wwwassets.e-ci.com/PDF/SDS/CI-D-07-PLA-3D-Printing-Filament.pdf)) > > > > --- > > > SECTION",
"I'd like to make sure some other factor isn't overlooked.",
"Skin contact, Inhalation, Ingestion. > ACUTE TOXICITY: None noted during",
"be irritating to eyes, skin and > respiratory system. Particles,",
"irritating to eyes. Ingestion may cause gastrointestinal > irritation, nausea,",
"gastrointestinal > irritation, nausea, vomiting and diarrhea. > > >",
"the components of this product are > listed as carcinogens",
"some other factor isn't overlooked. ([1](https://printparts.com/datasheets/PLA-MSDS.pdf), [2](https://www.nhh.com.hk/en/3dprinting/document/pla_classic/MSDS_PLA_Classic.pdf), [3](http://wwwassets.e-ci.com/PDF/SDS/CI-D-07-PLA-3D-Printing-Filament.pdf)) > >",
"TOXICITY: None noted during use. > LOCAL EFFECTS: Product dust",
"a toxicological level, but I'd like to make sure some",
"produces irritant > fumes. > > > CHRNOIC TOXICITY: None",
"dermatitis. > Ingestion may cause gastrointestinal irritation, nausea, vomiting and",
"shortness of breath, tightness > of the chest, a sore",
"PRINCIPLE ROUTES OF EXPOSURE: Eye contact, Skin contact, Inhalation, Ingestion.",
"ACUTE TOXICITY: None noted during use. > LOCAL EFFECTS: Product",
"inert materials, are > mechanically irritating to eyes. Ingestion may",
"eyes. Ingestion may cause gastrointestinal > irritation, nausea, vomiting and",
"[2](https://www.nhh.com.hk/en/3dprinting/document/pla_classic/MSDS_PLA_Classic.pdf), [3](http://wwwassets.e-ci.com/PDF/SDS/CI-D-07-PLA-3D-Printing-Filament.pdf)) > > > > --- > > >",
"Particles, like other inert materials, are > mechanically irritating to",
"PLA plastics indicates low risks at a toxicological level, but",
"to eyes. Ingestion may cause gastrointestinal > irritation, nausea, vomiting",
"product itself. > > CARCINOGENIC EFFECTS: None of the components",
"product are > listed as carcinogens by IARC, NTP, or",
"INFORMATION > > > --- > > > PRINCIPLE ROUTES",
"contact, Skin contact, Inhalation, Ingestion. > ACUTE TOXICITY: None noted",
"risks inherent to PLA plastics used for 3D printing? The",
"of some PLA plastics indicates low risks at a toxicological",
"> SECTION 11: TOXICOLOGICAL INFORMATION > > > --- >",
"> mechanically irritating to eyes. Ingestion may cause gastrointestinal >",
"cause shortness of breath, tightness > of the chest, a",
"chest, a sore throat and cough. Burning produces irritant >",
"level, but I'd like to make sure some other factor",
"make sure some other factor isn't overlooked. ([1](https://printparts.com/datasheets/PLA-MSDS.pdf), [2](https://www.nhh.com.hk/en/3dprinting/document/pla_classic/MSDS_PLA_Classic.pdf), [3](http://wwwassets.e-ci.com/PDF/SDS/CI-D-07-PLA-3D-Printing-Filament.pdf))",
"> LOCAL EFFECTS: Product dust may be irritating to eyes,",
"is available on the product itself. > > CARCINOGENIC EFFECTS:",
"irritation, nausea, vomiting and diarrhea. > > > SPECIFIC EFFECTS:",
"for 3D printing? The material safety data sheet of some",
"and/or dermatitis. > Ingestion may cause gastrointestinal irritation, nausea, vomiting",
"> CARCINOGENIC EFFECTS: None of the components of this product",
"EFFECTS: May cause skin irritation and/or dermatitis. > Ingestion may",
"> REPRODUCTIVE TOXICITY: No data is available on the product",
"> PRINCIPLE ROUTES OF EXPOSURE: Eye contact, Skin contact, Inhalation,",
"> respiratory system. Particles, like other inert materials, are >",
"the chest, a sore throat and cough. Burning produces irritant",
"None noted during use. > LOCAL EFFECTS: Product dust may",
"> > > > --- > > > SECTION 11:",
"> fumes. > > > CHRNOIC TOXICITY: None noted during",
"may cause gastrointestinal irritation, nausea, vomiting and > diarrhea. Inhalation",
"([1](https://printparts.com/datasheets/PLA-MSDS.pdf), [2](https://www.nhh.com.hk/en/3dprinting/document/pla_classic/MSDS_PLA_Classic.pdf), [3](http://wwwassets.e-ci.com/PDF/SDS/CI-D-07-PLA-3D-Printing-Filament.pdf)) > > > > --- > >",
"may cause shortness of breath, tightness > of the chest,",
"material safety data sheet of some PLA plastics indicates low",
"toxicological level, but I'd like to make sure some other",
"to eyes, skin and > respiratory system. Particles, like other",
"No data is available on the product itself. > >",
"dust may be irritating to eyes, skin and > respiratory",
"throat and cough. Burning produces irritant > fumes. > >",
"Ingestion may cause gastrointestinal irritation, nausea, vomiting and > diarrhea.",
"breath, tightness > of the chest, a sore throat and"
] |
[
"want to 3D print my jewelry packaging for rings, necklaces,",
"want the inside to be like a sponge. Is there",
"\"Product photo of a jewelry ring box\") I have two",
"need to set up each time it finishes a single",
"look like cloth or a sponge? 3. Are there printers",
"3. Are there printers on the market which are able",
"package? 2. I know I can build boxes for jewelry",
"several copies without the need to set up each time",
"bangles as in the picture below: [![Product photo of a",
"stores and want to 3D print my jewelry packaging for",
"I can build boxes for jewelry with the outside being",
"I know I can build boxes for jewelry with the",
"I want the inside to be like a sponge. Is",
"necklaces, and bangles as in the picture below: [![Product photo",
"problems: 1. Is 3D printing capable of building this package?",
"cloth or a sponge? 3. Are there printers on the",
"photo of a jewelry ring box](https://i.stack.imgur.com/NVwgE.png \"Product photo of a",
"filament to make it look like cloth or a sponge?",
"a sponge? 3. Are there printers on the market which",
"and bangles as in the picture below: [![Product photo of",
"sponge? 3. Are there printers on the market which are",
"on the market which are able to print several copies",
"jewelry ring box\") I have two main problems: 1. Is",
"or a way to print a filament to make it",
"3D print my jewelry packaging for rings, necklaces, and bangles",
"plastic. But I want the inside to be like a",
"and want to 3D print my jewelry packaging for rings,",
"of a jewelry ring box](https://i.stack.imgur.com/NVwgE.png \"Product photo of a jewelry",
"of building this package? 2. I know I can build",
"new to 3D printing. I own jewelry stores and want",
"printers on the market which are able to print several",
"like a sponge. Is there a filament or a way",
"box\") I have two main problems: 1. Is 3D printing",
"print my jewelry packaging for rings, necklaces, and bangles as",
"Is 3D printing capable of building this package? 2. I",
"2. I know I can build boxes for jewelry with",
"to be like a sponge. Is there a filament or",
"I own jewelry stores and want to 3D print my",
"picture below: [![Product photo of a jewelry ring box](https://i.stack.imgur.com/NVwgE.png \"Product",
"capable of building this package? 2. I know I can",
"printing capable of building this package? 2. I know I",
"copies without the need to set up each time it",
"to make it look like cloth or a sponge? 3.",
"ring box\")](https://i.stack.imgur.com/NVwgE.png \"Product photo of a jewelry ring box\") I",
"print a filament to make it look like cloth or",
"jewelry stores and want to 3D print my jewelry packaging",
"there a filament or a way to print a filament",
"am new to 3D printing. I own jewelry stores and",
"own jewelry stores and want to 3D print my jewelry",
"to 3D print my jewelry packaging for rings, necklaces, and",
"have two main problems: 1. Is 3D printing capable of",
"be like a sponge. Is there a filament or a",
"the outside being made of plastic. But I want the",
"ring box](https://i.stack.imgur.com/NVwgE.png \"Product photo of a jewelry ring box\")](https://i.stack.imgur.com/NVwgE.png \"Product",
"outside being made of plastic. But I want the inside",
"1. Is 3D printing capable of building this package? 2.",
"to print a filament to make it look like cloth",
"way to print a filament to make it look like",
"print several copies without the need to set up each",
"jewelry ring box](https://i.stack.imgur.com/NVwgE.png \"Product photo of a jewelry ring box\")](https://i.stack.imgur.com/NVwgE.png",
"for rings, necklaces, and bangles as in the picture below:",
"jewelry with the outside being made of plastic. But I",
"of plastic. But I want the inside to be like",
"made of plastic. But I want the inside to be",
"Is there a filament or a way to print a",
"a way to print a filament to make it look",
"are able to print several copies without the need to",
"my jewelry packaging for rings, necklaces, and bangles as in",
"can build boxes for jewelry with the outside being made",
"like cloth or a sponge? 3. Are there printers on",
"3D printing. I own jewelry stores and want to 3D",
"main problems: 1. Is 3D printing capable of building this",
"boxes for jewelry with the outside being made of plastic.",
"without the need to set up each time it finishes",
"printing. I own jewelry stores and want to 3D print",
"to set up each time it finishes a single box?",
"jewelry ring box\")](https://i.stack.imgur.com/NVwgE.png \"Product photo of a jewelry ring box\")",
"a sponge. Is there a filament or a way to",
"photo of a jewelry ring box\") I have two main",
"packaging for rings, necklaces, and bangles as in the picture",
"the need to set up each time it finishes a",
"to print several copies without the need to set up",
"being made of plastic. But I want the inside to",
"I have two main problems: 1. Is 3D printing capable",
"to 3D printing. I own jewelry stores and want to",
"ring box\") I have two main problems: 1. Is 3D",
"it look like cloth or a sponge? 3. Are there",
"this package? 2. I know I can build boxes for",
"able to print several copies without the need to set",
"two main problems: 1. Is 3D printing capable of building",
"for jewelry with the outside being made of plastic. But",
"the picture below: [![Product photo of a jewelry ring box](https://i.stack.imgur.com/NVwgE.png",
"jewelry packaging for rings, necklaces, and bangles as in the",
"sponge. Is there a filament or a way to print",
"[![Product photo of a jewelry ring box](https://i.stack.imgur.com/NVwgE.png \"Product photo of",
"filament or a way to print a filament to make",
"market which are able to print several copies without the",
"which are able to print several copies without the need",
"I am new to 3D printing. I own jewelry stores",
"a filament or a way to print a filament to",
"as in the picture below: [![Product photo of a jewelry",
"box\")](https://i.stack.imgur.com/NVwgE.png \"Product photo of a jewelry ring box\") I have",
"a jewelry ring box](https://i.stack.imgur.com/NVwgE.png \"Product photo of a jewelry ring",
"know I can build boxes for jewelry with the outside",
"a jewelry ring box\")](https://i.stack.imgur.com/NVwgE.png \"Product photo of a jewelry ring",
"in the picture below: [![Product photo of a jewelry ring",
"Are there printers on the market which are able to",
"the market which are able to print several copies without",
"building this package? 2. I know I can build boxes",
"\"Product photo of a jewelry ring box\")](https://i.stack.imgur.com/NVwgE.png \"Product photo of",
"But I want the inside to be like a sponge.",
"of a jewelry ring box\")](https://i.stack.imgur.com/NVwgE.png \"Product photo of a jewelry",
"or a sponge? 3. Are there printers on the market",
"make it look like cloth or a sponge? 3. Are",
"rings, necklaces, and bangles as in the picture below: [![Product",
"box](https://i.stack.imgur.com/NVwgE.png \"Product photo of a jewelry ring box\")](https://i.stack.imgur.com/NVwgE.png \"Product photo",
"of a jewelry ring box\") I have two main problems:",
"a jewelry ring box\") I have two main problems: 1.",
"3D printing capable of building this package? 2. I know",
"build boxes for jewelry with the outside being made of",
"with the outside being made of plastic. But I want",
"the inside to be like a sponge. Is there a",
"there printers on the market which are able to print",
"below: [![Product photo of a jewelry ring box](https://i.stack.imgur.com/NVwgE.png \"Product photo",
"a filament to make it look like cloth or a",
"photo of a jewelry ring box\")](https://i.stack.imgur.com/NVwgE.png \"Product photo of a",
"inside to be like a sponge. Is there a filament"
] |
[
"settings in Ultimaker Cura that allow to compensate an hole",
"handle this? Should I add a variable in my CAD",
"course if you set the diameters of the pin and",
"there a settings in Ultimaker Cura that allow to compensate",
"but with some resistance). I guess this tolerance (0.4 mm",
"and I use FreeCad / Ultimaker Cura as softwares. My",
"They should be coupled together. Of course if you set",
"nominal diameter of the coupling items? I don't think so,",
"the hole larger of 0.2 mm and the pin smaller",
"material, etc... so it may change using different setup. How",
"the pin smaller of 0.2 mm. This allow a quite",
"Of course if you set the diameters of the pin",
"be coupled together. Of course if you set the diameters",
"a pin and another with a hole. They should be",
"should be coupled together. Of course if you set the",
"of the pin and the hole equal the won't fit!",
"different setup. How to correctly handle this? Should I add",
"hole or a pin by a specified amount? Any other",
"use FreeCad / Ultimaker Cura as softwares. My question is",
"set the diameters of the pin and the hole equal",
"depends on a lot of variables: 3D printer settings, material,",
"may change using different setup. How to correctly handle this?",
"one object with a pin and another with a hole.",
"as softwares. My question is pretty simple. Say you have",
"another with a hole. They should be coupled together. Of",
"3D CAD and printing. I own a Dremel 3D45 and",
"the won't fit! Right now I'm setting the hole larger",
"and printing. I own a Dremel 3D45 and I use",
"coupled together. Of course if you set the diameters of",
"coupling items? I don't think so, but anyway: is there",
"allow a quite good coupling (not so hard but with",
"larger of 0.2 mm and the pin smaller of 0.2",
"mm. This allow a quite good coupling (not so hard",
"using different setup. How to correctly handle this? Should I",
"a quite good coupling (not so hard but with some",
"resistance). I guess this tolerance (0.4 mm in my example)",
"(not so hard but with some resistance). I guess this",
"my CAD spreadsheet and use it to change the nominal",
"is pretty simple. Say you have to make one object",
"and another with a hole. They should be coupled together.",
"in Ultimaker Cura that allow to compensate an hole or",
"pin smaller of 0.2 mm. This allow a quite good",
"some resistance). I guess this tolerance (0.4 mm in my",
"spreadsheet and use it to change the nominal diameter of",
"of 0.2 mm. This allow a quite good coupling (not",
"printing. I own a Dremel 3D45 and I use FreeCad",
"a variable in my CAD spreadsheet and use it to",
"settings, material, etc... so it may change using different setup.",
"quite new to 3D CAD and printing. I own a",
"hole. They should be coupled together. Of course if you",
"CAD spreadsheet and use it to change the nominal diameter",
"use it to change the nominal diameter of the coupling",
"so it may change using different setup. How to correctly",
"I'm quite new to 3D CAD and printing. I own",
"a hole. They should be coupled together. Of course if",
"3D printer settings, material, etc... so it may change using",
"but anyway: is there a settings in Ultimaker Cura that",
"hole larger of 0.2 mm and the pin smaller of",
"and the hole equal the won't fit! Right now I'm",
"Say you have to make one object with a pin",
"it to change the nominal diameter of the coupling items?",
"How to correctly handle this? Should I add a variable",
"CAD and printing. I own a Dremel 3D45 and I",
"an hole or a pin by a specified amount? Any",
"a Dremel 3D45 and I use FreeCad / Ultimaker Cura",
"variables: 3D printer settings, material, etc... so it may change",
"so hard but with some resistance). I guess this tolerance",
"hole equal the won't fit! Right now I'm setting the",
"won't fit! Right now I'm setting the hole larger of",
"in my example) depends on a lot of variables: 3D",
"own a Dremel 3D45 and I use FreeCad / Ultimaker",
"with a pin and another with a hole. They should",
"variable in my CAD spreadsheet and use it to change",
"the coupling items? I don't think so, but anyway: is",
"add a variable in my CAD spreadsheet and use it",
"hard but with some resistance). I guess this tolerance (0.4",
"you set the diameters of the pin and the hole",
"that allow to compensate an hole or a pin by",
"pin by a specified amount? Any other suggestion is gladly",
"in my CAD spreadsheet and use it to change the",
"lot of variables: 3D printer settings, material, etc... so it",
"example) depends on a lot of variables: 3D printer settings,",
"on a lot of variables: 3D printer settings, material, etc...",
"I'm setting the hole larger of 0.2 mm and the",
"a lot of variables: 3D printer settings, material, etc... so",
"by a specified amount? Any other suggestion is gladly accepted.",
"diameter of the coupling items? I don't think so, but",
"this tolerance (0.4 mm in my example) depends on a",
"fit! Right now I'm setting the hole larger of 0.2",
"compensate an hole or a pin by a specified amount?",
"pretty simple. Say you have to make one object with",
"diameters of the pin and the hole equal the won't",
"simple. Say you have to make one object with a",
"I own a Dremel 3D45 and I use FreeCad /",
"correctly handle this? Should I add a variable in my",
"to make one object with a pin and another with",
"FreeCad / Ultimaker Cura as softwares. My question is pretty",
"Right now I'm setting the hole larger of 0.2 mm",
"Ultimaker Cura that allow to compensate an hole or a",
"you have to make one object with a pin and",
"Cura that allow to compensate an hole or a pin",
"I add a variable in my CAD spreadsheet and use",
"change the nominal diameter of the coupling items? I don't",
"Should I add a variable in my CAD spreadsheet and",
"Cura as softwares. My question is pretty simple. Say you",
"anyway: is there a settings in Ultimaker Cura that allow",
"the hole equal the won't fit! Right now I'm setting",
"the pin and the hole equal the won't fit! Right",
"and the pin smaller of 0.2 mm. This allow a",
"mm in my example) depends on a lot of variables:",
"of 0.2 mm and the pin smaller of 0.2 mm.",
"object with a pin and another with a hole. They",
"mm and the pin smaller of 0.2 mm. This allow",
"coupling (not so hard but with some resistance). I guess",
"Dremel 3D45 and I use FreeCad / Ultimaker Cura as",
"with a hole. They should be coupled together. Of course",
"the diameters of the pin and the hole equal the",
"allow to compensate an hole or a pin by a",
"together. Of course if you set the diameters of the",
"have to make one object with a pin and another",
"0.2 mm and the pin smaller of 0.2 mm. This",
"setting the hole larger of 0.2 mm and the pin",
"this? Should I add a variable in my CAD spreadsheet",
"items? I don't think so, but anyway: is there a",
"make one object with a pin and another with a",
"with some resistance). I guess this tolerance (0.4 mm in",
"is there a settings in Ultimaker Cura that allow to",
"equal the won't fit! Right now I'm setting the hole",
"I don't think so, but anyway: is there a settings",
"question is pretty simple. Say you have to make one",
"(0.4 mm in my example) depends on a lot of",
"and use it to change the nominal diameter of the",
"softwares. My question is pretty simple. Say you have to",
"This allow a quite good coupling (not so hard but",
"don't think so, but anyway: is there a settings in",
"the nominal diameter of the coupling items? I don't think",
"if you set the diameters of the pin and the",
"0.2 mm. This allow a quite good coupling (not so",
"good coupling (not so hard but with some resistance). I",
"of variables: 3D printer settings, material, etc... so it may",
"to change the nominal diameter of the coupling items? I",
"of the coupling items? I don't think so, but anyway:",
"My question is pretty simple. Say you have to make",
"it may change using different setup. How to correctly handle",
"my example) depends on a lot of variables: 3D printer",
"Ultimaker Cura as softwares. My question is pretty simple. Say",
"I use FreeCad / Ultimaker Cura as softwares. My question",
"setup. How to correctly handle this? Should I add a",
"to correctly handle this? Should I add a variable in",
"new to 3D CAD and printing. I own a Dremel",
"so, but anyway: is there a settings in Ultimaker Cura",
"pin and another with a hole. They should be coupled",
"now I'm setting the hole larger of 0.2 mm and",
"3D45 and I use FreeCad / Ultimaker Cura as softwares.",
"tolerance (0.4 mm in my example) depends on a lot",
"to compensate an hole or a pin by a specified",
"printer settings, material, etc... so it may change using different",
"change using different setup. How to correctly handle this? Should",
"pin and the hole equal the won't fit! Right now",
"etc... so it may change using different setup. How to",
"guess this tolerance (0.4 mm in my example) depends on",
"/ Ultimaker Cura as softwares. My question is pretty simple.",
"a settings in Ultimaker Cura that allow to compensate an",
"think so, but anyway: is there a settings in Ultimaker",
"I guess this tolerance (0.4 mm in my example) depends",
"quite good coupling (not so hard but with some resistance).",
"smaller of 0.2 mm. This allow a quite good coupling",
"a pin by a specified amount? Any other suggestion is",
"to 3D CAD and printing. I own a Dremel 3D45",
"or a pin by a specified amount? Any other suggestion"
] |
[
"process? Are lead screws supposed to have notches like these,",
"common thing for a beginner in 3D printing). After booting",
"last night. I booted it up, but ran into problems",
"I guess is not a common thing for a beginner",
"are too deep for the z-axis to actually work the",
"Looking more closely at it, I noticed some notches on",
"lead screw and applied some Lithium lubricant on it. But",
"I finished assembling it last night. I booted it up,",
"noticed some notches on the lead screw: I tried to",
"did not have any resistance. The bolts on the rod",
"the z-axis to actually work the way it is supposed",
"bit of play inside. Im wondering if the lead screw",
"had a bit of play inside. Im wondering if the",
"assembling it last night. I booted it up, but ran",
"and applied some Lithium lubricant on it. But the problem",
"rattling sound. So I turned the 3D-printer off. I disassembled",
"lead screw:  Im guessing the notches are too deep",
"Pro. I finished assembling it last night. I booted it",
"ago I got my first 3D printer: Creality 3D Ender",
"guessing the notches are too deep for the z-axis to",
"it last night. I booted it up, but ran into",
"I booted it up, but ran into problems (which I",
"have notches like these, or are these manufacturing defects? Here's",
"loose so that the lead screw had a bit of",
"applied some Lithium lubricant on it. But the problem persisted.",
"screw had a bit of play inside. Im wondering if",
"motor, and it felt smooth and did not have any",
"down the Z-axis. I heard a rattling sound. So I",
"stepper motor, and it felt smooth and did not have",
"resistance. The bolts on the rod holder were slighly loose",
"The bolts on the rod holder were slighly loose so",
"Creality 3D Ender 3 Pro. I finished assembling it last",
"that the lead screw got stuck about halfway down the",
"tried to spin the Creality Z-axis stepper motor, and it",
"the rod holder were slighly loose so that the lead",
"more closely at it, I noticed some notches on the",
"defect during manufacturing process? Are lead screws supposed to have",
"a bit of play inside. Im wondering if the lead",
"a rattling sound. So I turned the 3D-printer off. I",
"I got my first 3D printer: Creality 3D Ender 3",
"I disassembled the lead screw and applied some Lithium lubricant",
"screw and applied some Lithium lubricant on it. But the",
"to spin the Creality Z-axis stepper motor, and it felt",
"of play inside. Im wondering if the lead screw may",
"days ago I got my first 3D printer: Creality 3D",
"not a common thing for a beginner in 3D printing).",
"motors, it seemed that the lead screw got stuck about",
"heard a rattling sound. So I turned the 3D-printer off.",
"screw: I tried to spin the Creality Z-axis stepper motor,",
"and did not have any resistance. The bolts on the",
"may have been defect during manufacturing process? Are lead screws",
"lubricant on it. But the problem persisted. Looking more closely",
"finished assembling it last night. I booted it up, but",
"Ender 3 Pro. I finished assembling it last night. I",
"But the problem persisted. Looking more closely at it, I",
"booting and running the motors, it seemed that the lead",
"the lead screw got stuck about halfway down the Z-axis.",
"Z-axis stepper motor, and it felt smooth and did not",
"have any resistance. The bolts on the rod holder were",
"bolts on the rod holder were slighly loose so that",
"3D printing). After booting and running the motors, it seemed",
"it seemed that the lead screw got stuck about halfway",
"on the lead screw: I tried to spin the Creality",
"it. But the problem persisted. Looking more closely at it,",
"rod holder were slighly loose so that the lead screw",
"been defect during manufacturing process? Are lead screws supposed to",
"Here's two photos of the lead screw:  Im guessing",
"some Lithium lubricant on it. But the problem persisted. Looking",
"the 3D-printer off. I disassembled the lead screw and applied",
"to have notches like these, or are these manufacturing defects?",
"So I turned the 3D-printer off. I disassembled the lead",
"like these, or are these manufacturing defects? Here's two photos",
"I tried to spin the Creality Z-axis stepper motor, and",
"screw:  Im guessing the notches are too deep for",
"the lead screw and applied some Lithium lubricant on it.",
"turned the 3D-printer off. I disassembled the lead screw and",
"A couple of days ago I got my first 3D",
"on the rod holder were slighly loose so that the",
"lead screw: I tried to spin the Creality Z-axis stepper",
"these manufacturing defects? Here's two photos of the lead screw:",
"for the z-axis to actually work the way it is",
"3D-printer off. I disassembled the lead screw and applied some",
"3D Ender 3 Pro. I finished assembling it last night.",
"but ran into problems (which I guess is not a",
"spin the Creality Z-axis stepper motor, and it felt smooth",
"a beginner in 3D printing). After booting and running the",
"printer: Creality 3D Ender 3 Pro. I finished assembling it",
"Z-axis. I heard a rattling sound. So I turned the",
"the problem persisted. Looking more closely at it, I noticed",
"photos of the lead screw:  Im guessing the notches",
"manufacturing defects? Here's two photos of the lead screw: ",
"and it felt smooth and did not have any resistance.",
"are these manufacturing defects? Here's two photos of the lead",
"the lead screw: I tried to spin the Creality Z-axis",
"is not a common thing for a beginner in 3D",
"closely at it, I noticed some notches on the lead",
"it, I noticed some notches on the lead screw: I",
"so that the lead screw had a bit of play",
"it up, but ran into problems (which I guess is",
"have been defect during manufacturing process? Are lead screws supposed",
"notches like these, or are these manufacturing defects? Here's two",
"and running the motors, it seemed that the lead screw",
"screw got stuck about halfway down the Z-axis. I heard",
"of the lead screw:  Im guessing the notches are",
"the lead screw may have been defect during manufacturing process?",
"defects? Here's two photos of the lead screw:  Im",
"in 3D printing). After booting and running the motors, it",
"that the lead screw had a bit of play inside.",
"holder were slighly loose so that the lead screw had",
"lead screw had a bit of play inside. Im wondering",
"Im wondering if the lead screw may have been defect",
"screws supposed to have notches like these, or are these",
"Im guessing the notches are too deep for the z-axis",
"problems (which I guess is not a common thing for",
"halfway down the Z-axis. I heard a rattling sound. So",
"3D printer: Creality 3D Ender 3 Pro. I finished assembling",
"After booting and running the motors, it seemed that the",
"sound. So I turned the 3D-printer off. I disassembled the",
"any resistance. The bolts on the rod holder were slighly",
"disassembled the lead screw and applied some Lithium lubricant on",
"it felt smooth and did not have any resistance. The",
"booted it up, but ran into problems (which I guess",
"got my first 3D printer: Creality 3D Ender 3 Pro.",
"up, but ran into problems (which I guess is not",
"of days ago I got my first 3D printer: Creality",
"Are lead screws supposed to have notches like these, or",
"notches are too deep for the z-axis to actually work",
"printing). After booting and running the motors, it seemed that",
"3 Pro. I finished assembling it last night. I booted",
"felt smooth and did not have any resistance. The bolts",
"thing for a beginner in 3D printing). After booting and",
"on it. But the problem persisted. Looking more closely at",
"problem persisted. Looking more closely at it, I noticed some",
"slighly loose so that the lead screw had a bit",
"play inside. Im wondering if the lead screw may have",
"supposed to have notches like these, or are these manufacturing",
"these, or are these manufacturing defects? Here's two photos of",
"into problems (which I guess is not a common thing",
"some notches on the lead screw: I tried to spin",
"the Creality Z-axis stepper motor, and it felt smooth and",
"Creality Z-axis stepper motor, and it felt smooth and did",
"ran into problems (which I guess is not a common",
"for a beginner in 3D printing). After booting and running",
"running the motors, it seemed that the lead screw got",
"if the lead screw may have been defect during manufacturing",
"the motors, it seemed that the lead screw got stuck",
"the lead screw:  Im guessing the notches are too",
"(which I guess is not a common thing for a",
"the Z-axis. I heard a rattling sound. So I turned",
"about halfway down the Z-axis. I heard a rattling sound.",
"stuck about halfway down the Z-axis. I heard a rattling",
"lead screws supposed to have notches like these, or are",
"I turned the 3D-printer off. I disassembled the lead screw",
"the notches are too deep for the z-axis to actually",
"got stuck about halfway down the Z-axis. I heard a",
"seemed that the lead screw got stuck about halfway down",
"I noticed some notches on the lead screw: I tried",
"were slighly loose so that the lead screw had a",
"lead screw got stuck about halfway down the Z-axis. I",
"not have any resistance. The bolts on the rod holder",
"a common thing for a beginner in 3D printing). After",
"during manufacturing process? Are lead screws supposed to have notches",
"beginner in 3D printing). After booting and running the motors,",
"persisted. Looking more closely at it, I noticed some notches",
"the lead screw had a bit of play inside. Im",
"or are these manufacturing defects? Here's two photos of the",
"guess is not a common thing for a beginner in",
"night. I booted it up, but ran into problems (which",
"my first 3D printer: Creality 3D Ender 3 Pro. I",
"manufacturing process? Are lead screws supposed to have notches like",
"couple of days ago I got my first 3D printer:",
"lead screw may have been defect during manufacturing process? Are",
"off. I disassembled the lead screw and applied some Lithium",
"Lithium lubricant on it. But the problem persisted. Looking more",
"at it, I noticed some notches on the lead screw:",
"wondering if the lead screw may have been defect during",
"z-axis to actually work the way it is supposed to.",
" Im guessing the notches are too deep for the",
"too deep for the z-axis to actually work the way",
"two photos of the lead screw:  Im guessing the",
"notches on the lead screw: I tried to spin the",
"first 3D printer: Creality 3D Ender 3 Pro. I finished",
"smooth and did not have any resistance. The bolts on",
"I heard a rattling sound. So I turned the 3D-printer",
"inside. Im wondering if the lead screw may have been",
"screw may have been defect during manufacturing process? Are lead",
"deep for the z-axis to actually work the way it"
] |
[
"it (from a user level, not a dev level). I",
"to support it (from a user level, not a dev",
"that means I'm missing out on more, if there are",
"printer * Blackbelt Cura - Everyone who mentions it says",
"slicers than I expected, since I was only expecting 3",
"* Raise3d Ideamaker - Seems to be based on Flashforge's",
"level). I found more total slicers than I expected, since",
"Simplify3d). Surely that means I'm missing out on more, if",
"features too. Not as configurable as Slic3r or PrusaSlicer though.",
"some interesting features too. Not as configurable as Slic3r or",
"be based on Flashforge's slicer, has some interesting features too.",
"plugin, or extension added to them to support it (from",
"so many different slicers. * Creality Slicer - Comes from",
"it's old * Raise3d Ideamaker - Seems to be based",
"an add-on, plugin, or extension added to them to support",
"the printer * Blackbelt Cura - Everyone who mentions it",
"found more total slicers than I expected, since I was",
"(from a user level, not a dev level). I found",
"- Everyone who mentions it says don't use it because",
"- Seems to be based on Flashforge's slicer, has some",
"support for belt printers like the CR-30? Or what slicers",
"what slicers can have an add-on, plugin, or extension added",
"Everyone who mentions it says don't use it because it's",
"Creality Slicer - Comes from the OEM of the printer",
"PrusaSlicer, Simplify3d). Surely that means I'm missing out on more,",
"slicers have support for belt printers like the CR-30? Or",
"can have an add-on, plugin, or extension added to them",
"slicers. * Creality Slicer - Comes from the OEM of",
"means I'm missing out on more, if there are already",
"belt printers like the CR-30? Or what slicers can have",
"I'm missing out on more, if there are already so",
"I expected, since I was only expecting 3 (Cura, PrusaSlicer,",
"not a dev level). I found more total slicers than",
"- Comes from the OEM of the printer * Blackbelt",
"for belt printers like the CR-30? Or what slicers can",
"* Blackbelt Cura - Everyone who mentions it says don't",
"has some interesting features too. Not as configurable as Slic3r",
"expected, since I was only expecting 3 (Cura, PrusaSlicer, Simplify3d).",
"Comes from the OEM of the printer * Blackbelt Cura",
"out on more, if there are already so many different",
"it says don't use it because it's old * Raise3d",
"to them to support it (from a user level, not",
"use it because it's old * Raise3d Ideamaker - Seems",
"old * Raise3d Ideamaker - Seems to be based on",
"says don't use it because it's old * Raise3d Ideamaker",
"add-on, plugin, or extension added to them to support it",
"have support for belt printers like the CR-30? Or what",
"extension added to them to support it (from a user",
"the CR-30? Or what slicers can have an add-on, plugin,",
"because it's old * Raise3d Ideamaker - Seems to be",
"user level, not a dev level). I found more total",
"a user level, not a dev level). I found more",
"OEM of the printer * Blackbelt Cura - Everyone who",
"I was only expecting 3 (Cura, PrusaSlicer, Simplify3d). Surely that",
"or extension added to them to support it (from a",
"Surely that means I'm missing out on more, if there",
"don't use it because it's old * Raise3d Ideamaker -",
"more, if there are already so many different slicers. *",
"it because it's old * Raise3d Ideamaker - Seems to",
"a dev level). I found more total slicers than I",
"3 (Cura, PrusaSlicer, Simplify3d). Surely that means I'm missing out",
"if there are already so many different slicers. * Creality",
"Ideamaker - Seems to be based on Flashforge's slicer, has",
"from the OEM of the printer * Blackbelt Cura -",
"many different slicers. * Creality Slicer - Comes from the",
"of the printer * Blackbelt Cura - Everyone who mentions",
"on more, if there are already so many different slicers.",
"are already so many different slicers. * Creality Slicer -",
"Cura - Everyone who mentions it says don't use it",
"printers like the CR-30? Or what slicers can have an",
"slicer, has some interesting features too. Not as configurable as",
"(Cura, PrusaSlicer, Simplify3d). Surely that means I'm missing out on",
"Blackbelt Cura - Everyone who mentions it says don't use",
"mentions it says don't use it because it's old *",
"more total slicers than I expected, since I was only",
"different slicers. * Creality Slicer - Comes from the OEM",
"based on Flashforge's slicer, has some interesting features too. Not",
"Flashforge's slicer, has some interesting features too. Not as configurable",
"added to them to support it (from a user level,",
"the OEM of the printer * Blackbelt Cura - Everyone",
"expecting 3 (Cura, PrusaSlicer, Simplify3d). Surely that means I'm missing",
"on Flashforge's slicer, has some interesting features too. Not as",
"like the CR-30? Or what slicers can have an add-on,",
"dev level). I found more total slicers than I expected,",
"them to support it (from a user level, not a",
"interesting features too. Not as configurable as Slic3r or PrusaSlicer",
"to be based on Flashforge's slicer, has some interesting features",
"What slicers have support for belt printers like the CR-30?",
"slicers can have an add-on, plugin, or extension added to",
"already so many different slicers. * Creality Slicer - Comes",
"who mentions it says don't use it because it's old",
"level, not a dev level). I found more total slicers",
"I found more total slicers than I expected, since I",
"was only expecting 3 (Cura, PrusaSlicer, Simplify3d). Surely that means",
"total slicers than I expected, since I was only expecting",
"Seems to be based on Flashforge's slicer, has some interesting",
"only expecting 3 (Cura, PrusaSlicer, Simplify3d). Surely that means I'm",
"than I expected, since I was only expecting 3 (Cura,",
"Slicer - Comes from the OEM of the printer *",
"* Creality Slicer - Comes from the OEM of the",
"Raise3d Ideamaker - Seems to be based on Flashforge's slicer,",
"have an add-on, plugin, or extension added to them to",
"Or what slicers can have an add-on, plugin, or extension",
"CR-30? Or what slicers can have an add-on, plugin, or",
"there are already so many different slicers. * Creality Slicer",
"missing out on more, if there are already so many",
"since I was only expecting 3 (Cura, PrusaSlicer, Simplify3d). Surely",
"support it (from a user level, not a dev level)."
] |
[
"problem with Cura? Is there something I can do to",
"to encourage it to use concentric infill? I don't really",
"section, like this: [](https://i.stack.imgur.com/9cx9Y.png) I'm using Cura as the",
"I can do to encourage it to use concentric infill?",
"to 100% and `concentric`, but after slicing it looks like",
"replacement for the non-slip base of a mixing bowl. The",
"infill to 100% and `concentric`, but after slicing it looks",
"slicing it looks like Cura used `lines` instead; the ring",
"after slicing it looks like Cura used `lines` instead; the",
"is about 130mm in diameter, with a rectangular cross section,",
"to use concentric infill? I don't really care what the",
"130mm in diameter, with a rectangular cross section, like this:",
"but after slicing it looks like Cura used `lines` instead;",
"instead; the ring is filled with parallel straight lines: [](https://i.stack.imgur.com/LEfXF.png) Is this",
"would print a lot faster since the head wouldn't have",
"I don't really care what the infill pattern is, but",
"there something I can do to encourage it to use",
"base of a mixing bowl. The ring is about 130mm",
"rectangular cross section, like this: [](https://i.stack.imgur.com/9cx9Y.png) I'm using Cura",
"and I've set the infill to 100% and `concentric`, but",
"bowl. The ring is about 130mm in diameter, with a",
"the slicer, and I've set the infill to 100% and",
"cross section, like this: [](https://i.stack.imgur.com/9cx9Y.png) I'm using Cura as",
"`concentric` would print a lot faster since the head wouldn't",
"like this: [](https://i.stack.imgur.com/9cx9Y.png) I'm using Cura as the slicer,",
"is, but I think `concentric` would print a lot faster",
"the head wouldn't have to switch directions all the time.",
"as the slicer, and I've set the infill to 100%",
"I've set the infill to 100% and `concentric`, but after",
"can do to encourage it to use concentric infill? I",
"printing a ring that's a replacement for the non-slip base",
"a replacement for the non-slip base of a mixing bowl.",
"a rectangular cross section, like this: [](https://i.stack.imgur.com/9cx9Y.png) I'm using",
"pattern is, but I think `concentric` would print a lot",
"with Cura? Is there something I can do to encourage",
"parallel straight lines: [](https://i.stack.imgur.com/LEfXF.png) Is this a problem with",
"diameter, with a rectangular cross section, like this: [](https://i.stack.imgur.com/9cx9Y.png)",
"I'm using Cura as the slicer, and I've set the",
"do to encourage it to use concentric infill? I don't",
"use concentric infill? I don't really care what the infill",
"Cura as the slicer, and I've set the infill to",
"encourage it to use concentric infill? I don't really care",
"[](https://i.stack.imgur.com/LEfXF.png) Is this a problem with Cura? Is there",
"used `lines` instead; the ring is filled with parallel straight",
"this: [](https://i.stack.imgur.com/9cx9Y.png) I'm using Cura as the slicer, and",
"don't really care what the infill pattern is, but I",
"of a mixing bowl. The ring is about 130mm in",
"ring that's a replacement for the non-slip base of a",
"concentric infill? I don't really care what the infill pattern",
"looks like Cura used `lines` instead; the ring is filled",
"and `concentric`, but after slicing it looks like Cura used",
"I'm printing a ring that's a replacement for the non-slip",
"this a problem with Cura? Is there something I can",
"using Cura as the slicer, and I've set the infill",
"faster since the head wouldn't have to switch directions all",
"set the infill to 100% and `concentric`, but after slicing",
"print a lot faster since the head wouldn't have to",
"lines: [](https://i.stack.imgur.com/LEfXF.png) Is this a problem with Cura? Is",
"straight lines: [](https://i.stack.imgur.com/LEfXF.png) Is this a problem with Cura?",
"in diameter, with a rectangular cross section, like this: [](https://i.stack.imgur.com/9cx9Y.png) I'm",
"infill? I don't really care what the infill pattern is,",
"`lines` instead; the ring is filled with parallel straight lines:",
"the ring is filled with parallel straight lines: [](https://i.stack.imgur.com/LEfXF.png)",
"ring is filled with parallel straight lines: [](https://i.stack.imgur.com/LEfXF.png) Is",
"for the non-slip base of a mixing bowl. The ring",
"`concentric`, but after slicing it looks like Cura used `lines`",
"Cura used `lines` instead; the ring is filled with parallel",
"infill](https://i.stack.imgur.com/LEfXF.png)](https://i.stack.imgur.com/LEfXF.png) Is this a problem with Cura? Is there something",
"it to use concentric infill? I don't really care what",
"a problem with Cura? Is there something I can do",
"ring](https://i.stack.imgur.com/9cx9Y.png)](https://i.stack.imgur.com/9cx9Y.png) I'm using Cura as the slicer, and I've set",
"I think `concentric` would print a lot faster since the",
"really care what the infill pattern is, but I think",
"with parallel straight lines: [](https://i.stack.imgur.com/LEfXF.png) Is this a problem",
"the infill to 100% and `concentric`, but after slicing it",
"the infill pattern is, but I think `concentric` would print",
"The ring is about 130mm in diameter, with a rectangular",
"since the head wouldn't have to switch directions all the",
"something I can do to encourage it to use concentric",
"slicer, and I've set the infill to 100% and `concentric`,",
"a lot faster since the head wouldn't have to switch",
"like Cura used `lines` instead; the ring is filled with",
"it looks like Cura used `lines` instead; the ring is",
"lot faster since the head wouldn't have to switch directions",
"[](https://i.stack.imgur.com/9cx9Y.png) I'm using Cura as the slicer, and I've",
"100% and `concentric`, but after slicing it looks like Cura",
"mixing bowl. The ring is about 130mm in diameter, with",
"non-slip base of a mixing bowl. The ring is about",
"but I think `concentric` would print a lot faster since",
"Cura? Is there something I can do to encourage it",
"infill pattern is, but I think `concentric` would print a",
"a mixing bowl. The ring is about 130mm in diameter,",
"that's a replacement for the non-slip base of a mixing",
"Is this a problem with Cura? Is there something I",
"think `concentric` would print a lot faster since the head",
"filled with parallel straight lines: [](https://i.stack.imgur.com/LEfXF.png) Is this a",
"a ring that's a replacement for the non-slip base of"
] |
[
"until the hotend has cooled down below the filament’s glass",
"if there is no filament, would it stand to reason",
"And it doesn’t matter if the cold end gets hot?",
"filament on the machine after a print, I’m normally in",
"in the habit of waiting until the hotend has cooled",
"With a fan cooled, all metal hotend, is there any",
"to cool, before shutting down power, if the filament has",
"is there any reason to wait for the hotend to",
"on the machine after a print, I’m normally in the",
"to get heat creep? And it doesn’t matter if the",
"has cooled down below the filament’s glass temperature before turning",
"running and the heat block hot, the filament can get",
"remaining plastic in the hotend to get heat creep? And",
"plastic in the hotend to get heat creep? And it",
"stand to reason there isn’t enough remaining plastic in the",
"fan running and the heat block hot, the filament can",
"would it stand to reason there isn’t enough remaining plastic",
"filament has been unloaded? When leaving the filament on the",
"waiting until the hotend has cooled down below the filament’s",
"glass temperature before turning the printer off, because without the",
"cool, before shutting down power, if the filament has been",
"it stand to reason there isn’t enough remaining plastic in",
"enough remaining plastic in the hotend to get heat creep?",
"below the filament’s glass temperature before turning the printer off,",
"for the hotend to cool, before shutting down power, if",
"in cold end and potentially jam next time. But if",
"if the filament has been unloaded? When leaving the filament",
"in the hotend to get heat creep? And it doesn’t",
"isn’t enough remaining plastic in the hotend to get heat",
"normally in the habit of waiting until the hotend has",
"time. But if there is no filament, would it stand",
"hotend, is there any reason to wait for the hotend",
"to reason there isn’t enough remaining plastic in the hotend",
"power, if the filament has been unloaded? When leaving the",
"and the heat block hot, the filament can get softened",
"leaving the filament on the machine after a print, I’m",
"reason to wait for the hotend to cool, before shutting",
"hotend to cool, before shutting down power, if the filament",
"before turning the printer off, because without the hotend fan",
"metal hotend, is there any reason to wait for the",
"print, I’m normally in the habit of waiting until the",
"is no filament, would it stand to reason there isn’t",
"jam next time. But if there is no filament, would",
"creep? And it doesn’t matter if the cold end gets",
"any reason to wait for the hotend to cool, before",
"unloaded? When leaving the filament on the machine after a",
"the filament’s glass temperature before turning the printer off, because",
"hot, the filament can get softened up in cold end",
"the filament has been unloaded? When leaving the filament on",
"cooled, all metal hotend, is there any reason to wait",
"cold end and potentially jam next time. But if there",
"the hotend to get heat creep? And it doesn’t matter",
"the machine after a print, I’m normally in the habit",
"turning the printer off, because without the hotend fan running",
"potentially jam next time. But if there is no filament,",
"before shutting down power, if the filament has been unloaded?",
"hotend fan running and the heat block hot, the filament",
"down power, if the filament has been unloaded? When leaving",
"cooled down below the filament’s glass temperature before turning the",
"hotend to get heat creep? And it doesn’t matter if",
"after a print, I’m normally in the habit of waiting",
"to wait for the hotend to cool, before shutting down",
"a fan cooled, all metal hotend, is there any reason",
"softened up in cold end and potentially jam next time.",
"been unloaded? When leaving the filament on the machine after",
"a print, I’m normally in the habit of waiting until",
"fan cooled, all metal hotend, is there any reason to",
"habit of waiting until the hotend has cooled down below",
"and potentially jam next time. But if there is no",
"up in cold end and potentially jam next time. But",
"reason there isn’t enough remaining plastic in the hotend to",
"block hot, the filament can get softened up in cold",
"the hotend to cool, before shutting down power, if the",
"there isn’t enough remaining plastic in the hotend to get",
"the hotend fan running and the heat block hot, the",
"down below the filament’s glass temperature before turning the printer",
"can get softened up in cold end and potentially jam",
"heat creep? And it doesn’t matter if the cold end",
"When leaving the filament on the machine after a print,",
"next time. But if there is no filament, would it",
"without the hotend fan running and the heat block hot,",
"no filament, would it stand to reason there isn’t enough",
"machine after a print, I’m normally in the habit of",
"temperature before turning the printer off, because without the hotend",
"get softened up in cold end and potentially jam next",
"filament, would it stand to reason there isn’t enough remaining",
"filament can get softened up in cold end and potentially",
"I’m normally in the habit of waiting until the hotend",
"get heat creep? And it doesn’t matter if the cold",
"hotend has cooled down below the filament’s glass temperature before",
"But if there is no filament, would it stand to",
"end and potentially jam next time. But if there is",
"printer off, because without the hotend fan running and the",
"has been unloaded? When leaving the filament on the machine",
"of waiting until the hotend has cooled down below the",
"the habit of waiting until the hotend has cooled down",
"shutting down power, if the filament has been unloaded? When",
"heat block hot, the filament can get softened up in",
"filament’s glass temperature before turning the printer off, because without",
"there is no filament, would it stand to reason there",
"there any reason to wait for the hotend to cool,",
"all metal hotend, is there any reason to wait for",
"wait for the hotend to cool, before shutting down power,",
"the filament on the machine after a print, I’m normally",
"the printer off, because without the hotend fan running and",
"the hotend has cooled down below the filament’s glass temperature",
"the heat block hot, the filament can get softened up",
"because without the hotend fan running and the heat block",
"off, because without the hotend fan running and the heat",
"the filament can get softened up in cold end and"
] |
[
"head is in the middle of the bed and moves",
"my Ender 3 v2 printer I recently and consistently get",
"it now occurs all the time when printing the initial",
"I move the model - in Cura - closer to",
"times. Secondly, it occurs if the model (sliced with Cura)",
"20 mm then travels directly to the top left corner.",
"At the end of a print the print head is",
"There is a third scenario. At the end of a",
"only two scenarios. First, it now occurs all the time",
"initial test strip gets near the top (high Y value),",
"the printer sometimes knocks when a high Y value is",
"layers the printer sometimes knocks when a high Y value",
"model is thereafter shifted to the front by a few",
"Any suggestions to diagnose/fix this problem will be much appreciated.",
"- in Cura - closer to the front there is",
"middle of the bed and moves up 20 mm then",
"bed). Any suggestions to diagnose/fix this problem will be much",
"to the front there is no knocking.) On the first",
"knocking. This happens in only two scenarios. First, it now",
"\"knocks\" (and the nozzle is 20 mm above the bed).",
"this corner there are 4 or 5 \"knocks\" (and the",
"end of a print the print head is in the",
"print the print head is in the middle of the",
"third scenario. At the end of a print the print",
"bed and moves up 20 mm then travels directly to",
"(eg: if the model occupies most of the bed). (If",
"printer sometimes knocks when a high Y value is reached",
"Ender 3 v2 printer I recently and consistently get some",
"near the top (high Y value), and knocks several times.",
"if the model occupies most of the bed). (If there",
"the initial test strip gets near the top (high Y",
"of the bed). (If there is room and I move",
"reached and the entire model is thereafter shifted to the",
"scenario. At the end of a print the print head",
"Y value (eg: if the model occupies most of the",
"and moves up 20 mm then travels directly to the",
"nozzle is 20 mm above the bed). Any suggestions to",
"Y value is reached and the entire model is thereafter",
"then travels directly to the top left corner. At this",
"knocks several times. Secondly, it occurs if the model (sliced",
"corner. At this corner there are 4 or 5 \"knocks\"",
"knocking.) On the first 10 (or so) layers the printer",
"and knocks several times. Secondly, it occurs if the model",
"and the entire model is thereafter shifted to the front",
"On the first 10 (or so) layers the printer sometimes",
"4 or 5 \"knocks\" (and the nozzle is 20 mm",
"the nozzle is 20 mm above the bed). Any suggestions",
"up 20 mm then travels directly to the top left",
"travels directly to the top left corner. At this corner",
"gets near the top (high Y value), and knocks several",
"occurs all the time when printing the initial test strip",
"are 4 or 5 \"knocks\" (and the nozzle is 20",
"of a print the print head is in the middle",
"I recently and consistently get some knocking. This happens in",
"10 (or so) layers the printer sometimes knocks when a",
"- closer to the front there is no knocking.) On",
"model (sliced with Cura) has a high Y value (eg:",
"a third scenario. At the end of a print the",
"first 10 (or so) layers the printer sometimes knocks when",
"test strip gets near the top (high Y value), and",
"so) layers the printer sometimes knocks when a high Y",
"(and the nozzle is 20 mm above the bed). Any",
"20 mm above the bed). Any suggestions to diagnose/fix this",
"in only two scenarios. First, it now occurs all the",
"(or so) layers the printer sometimes knocks when a high",
"value (eg: if the model occupies most of the bed).",
"shifted to the front by a few millimeters. There is",
"the front by a few millimeters. There is a third",
"the bed and moves up 20 mm then travels directly",
"several times. Secondly, it occurs if the model (sliced with",
"entire model is thereafter shifted to the front by a",
"the middle of the bed and moves up 20 mm",
"some knocking. This happens in only two scenarios. First, it",
"and I move the model - in Cura - closer",
"millimeters. There is a third scenario. At the end of",
"the model - in Cura - closer to the front",
"there is room and I move the model - in",
"of the bed and moves up 20 mm then travels",
"top (high Y value), and knocks several times. Secondly, it",
"high Y value (eg: if the model occupies most of",
"in Cura - closer to the front there is no",
"now occurs all the time when printing the initial test",
"model - in Cura - closer to the front there",
"with Cura) has a high Y value (eg: if the",
"v2 printer I recently and consistently get some knocking. This",
"it occurs if the model (sliced with Cura) has a",
"print head is in the middle of the bed and",
"the top left corner. At this corner there are 4",
"Cura - closer to the front there is no knocking.)",
"closer to the front there is no knocking.) On the",
"is no knocking.) On the first 10 (or so) layers",
"printing the initial test strip gets near the top (high",
"is 20 mm above the bed). Any suggestions to diagnose/fix",
"move the model - in Cura - closer to the",
"a high Y value (eg: if the model occupies most",
"the model (sliced with Cura) has a high Y value",
"a high Y value is reached and the entire model",
"recently and consistently get some knocking. This happens in only",
"few millimeters. There is a third scenario. At the end",
"all the time when printing the initial test strip gets",
"or 5 \"knocks\" (and the nozzle is 20 mm above",
"3 v2 printer I recently and consistently get some knocking.",
"time when printing the initial test strip gets near the",
"moves up 20 mm then travels directly to the top",
"thereafter shifted to the front by a few millimeters. There",
"to the front by a few millimeters. There is a",
"the end of a print the print head is in",
"to the top left corner. At this corner there are",
"knocks when a high Y value is reached and the",
"left corner. At this corner there are 4 or 5",
"value is reached and the entire model is thereafter shifted",
"strip gets near the top (high Y value), and knocks",
"the entire model is thereafter shifted to the front by",
"a print the print head is in the middle of",
"bed). (If there is room and I move the model",
"the front there is no knocking.) On the first 10",
"5 \"knocks\" (and the nozzle is 20 mm above the",
"there is no knocking.) On the first 10 (or so)",
"(high Y value), and knocks several times. Secondly, it occurs",
"room and I move the model - in Cura -",
"when printing the initial test strip gets near the top",
"Secondly, it occurs if the model (sliced with Cura) has",
"if the model (sliced with Cura) has a high Y",
"the top (high Y value), and knocks several times. Secondly,",
"mm then travels directly to the top left corner. At",
"value), and knocks several times. Secondly, it occurs if the",
"(sliced with Cura) has a high Y value (eg: if",
"At this corner there are 4 or 5 \"knocks\" (and",
"in the middle of the bed and moves up 20",
"model occupies most of the bed). (If there is room",
"directly to the top left corner. At this corner there",
"front there is no knocking.) On the first 10 (or",
"consistently get some knocking. This happens in only two scenarios.",
"the print head is in the middle of the bed",
"happens in only two scenarios. First, it now occurs all",
"printer I recently and consistently get some knocking. This happens",
"is room and I move the model - in Cura",
"most of the bed). (If there is room and I",
"two scenarios. First, it now occurs all the time when",
"by a few millimeters. There is a third scenario. At",
"the bed). (If there is room and I move the",
"get some knocking. This happens in only two scenarios. First,",
"occurs if the model (sliced with Cura) has a high",
"is reached and the entire model is thereafter shifted to",
"Y value), and knocks several times. Secondly, it occurs if",
"occupies most of the bed). (If there is room and",
"the first 10 (or so) layers the printer sometimes knocks",
"the model occupies most of the bed). (If there is",
"(If there is room and I move the model -",
"no knocking.) On the first 10 (or so) layers the",
"the time when printing the initial test strip gets near",
"mm above the bed). Any suggestions to diagnose/fix this problem",
"there are 4 or 5 \"knocks\" (and the nozzle is",
"front by a few millimeters. There is a third scenario.",
"the bed). Any suggestions to diagnose/fix this problem will be",
"top left corner. At this corner there are 4 or",
"First, it now occurs all the time when printing the",
"has a high Y value (eg: if the model occupies",
"and consistently get some knocking. This happens in only two",
"is thereafter shifted to the front by a few millimeters.",
"a few millimeters. There is a third scenario. At the",
"high Y value is reached and the entire model is",
"On my Ender 3 v2 printer I recently and consistently",
"above the bed). Any suggestions to diagnose/fix this problem will",
"Cura) has a high Y value (eg: if the model",
"when a high Y value is reached and the entire",
"is in the middle of the bed and moves up",
"corner there are 4 or 5 \"knocks\" (and the nozzle",
"scenarios. First, it now occurs all the time when printing",
"This happens in only two scenarios. First, it now occurs",
"sometimes knocks when a high Y value is reached and",
"is a third scenario. At the end of a print"
] |
[
"with standard PLA and Creality slicer 4.8.2. How can I",
"My aim is to have \"thousands of hair like threads",
"like to do this in the slicer with PLA, rather",
"to do this in the slicer with PLA, rather than",
"it to be as consistent as possible. My aim is",
"to be as consistent as possible. My aim is to",
"be as consistent as possible. My aim is to have",
"maximise stringing, and if possible get it to be as",
"have \"thousands of hair like threads strung between two rocky",
"stringing, and if possible get it to be as consistent",
"and Creality slicer 4.8.2. How can I deliberately maximise stringing,",
"Creality slicer 4.8.2. How can I deliberately maximise stringing, and",
"using cotton or some other material after the model has",
"cotton or some other material after the model has printed.",
"rather than using cotton or some other material after the",
"How can I deliberately maximise stringing, and if possible get",
"strung between two rocky pillars\". If possible I'd like to",
"with PLA, rather than using cotton or some other material",
"of hair like threads strung between two rocky pillars\". If",
"If possible I'd like to do this in the slicer",
"aim is to have \"thousands of hair like threads strung",
"I'd like to do this in the slicer with PLA,",
"hair like threads strung between two rocky pillars\". If possible",
"in the slicer with PLA, rather than using cotton or",
"\"thousands of hair like threads strung between two rocky pillars\".",
"between two rocky pillars\". If possible I'd like to do",
"is to have \"thousands of hair like threads strung between",
"PLA and Creality slicer 4.8.2. How can I deliberately maximise",
"than using cotton or some other material after the model",
"as possible. My aim is to have \"thousands of hair",
"standard PLA and Creality slicer 4.8.2. How can I deliberately",
"I'm using an Ender 5 with standard PLA and Creality",
"get it to be as consistent as possible. My aim",
"to have \"thousands of hair like threads strung between two",
"deliberately maximise stringing, and if possible get it to be",
"consistent as possible. My aim is to have \"thousands of",
"if possible get it to be as consistent as possible.",
"two rocky pillars\". If possible I'd like to do this",
"possible. My aim is to have \"thousands of hair like",
"slicer 4.8.2. How can I deliberately maximise stringing, and if",
"threads strung between two rocky pillars\". If possible I'd like",
"4.8.2. How can I deliberately maximise stringing, and if possible",
"slicer with PLA, rather than using cotton or some other",
"using an Ender 5 with standard PLA and Creality slicer",
"do this in the slicer with PLA, rather than using",
"pillars\". If possible I'd like to do this in the",
"I deliberately maximise stringing, and if possible get it to",
"and if possible get it to be as consistent as",
"an Ender 5 with standard PLA and Creality slicer 4.8.2.",
"this in the slicer with PLA, rather than using cotton",
"possible I'd like to do this in the slicer with",
"can I deliberately maximise stringing, and if possible get it",
"as consistent as possible. My aim is to have \"thousands",
"possible get it to be as consistent as possible. My",
"the slicer with PLA, rather than using cotton or some",
"Ender 5 with standard PLA and Creality slicer 4.8.2. How",
"PLA, rather than using cotton or some other material after",
"rocky pillars\". If possible I'd like to do this in",
"like threads strung between two rocky pillars\". If possible I'd",
"5 with standard PLA and Creality slicer 4.8.2. How can"
] |
[
"I have 12 parts for a model I want to",
"and print that on its own. Would this affect the",
"them in a single G-code file and print that on",
"a model I want to print but I would like",
"can put all of them in a single G-code file",
"to know if I can put all of them in",
"this affect the model in any way? I’m using PLA",
"know if I can put all of them in a",
"all of them in a single G-code file and print",
"own. Would this affect the model in any way? I’m",
"want to print but I would like to know if",
"in any way? I’m using PLA on my Ender 3",
"model in any way? I’m using PLA on my Ender",
"have 12 parts for a model I want to print",
"put all of them in a single G-code file and",
"parts for a model I want to print but I",
"I want to print but I would like to know",
"its own. Would this affect the model in any way?",
"the model in any way? I’m using PLA on my",
"that on its own. Would this affect the model in",
"12 parts for a model I want to print but",
"file and print that on its own. Would this affect",
"Would this affect the model in any way? I’m using",
"print but I would like to know if I can",
"if I can put all of them in a single",
"single G-code file and print that on its own. Would",
"in a single G-code file and print that on its",
"for a model I want to print but I would",
"I would like to know if I can put all",
"any way? I’m using PLA on my Ender 3 Pro",
"print that on its own. Would this affect the model",
"but I would like to know if I can put",
"of them in a single G-code file and print that",
"to print but I would like to know if I",
"on its own. Would this affect the model in any",
"affect the model in any way? I’m using PLA on",
"like to know if I can put all of them",
"a single G-code file and print that on its own.",
"G-code file and print that on its own. Would this",
"I can put all of them in a single G-code",
"model I want to print but I would like to",
"would like to know if I can put all of"
] |
[
"printed clip showing extra extrusion\") I positioned the seam on",
"the clip I printed has extra extrusion on the inside",
"clean off all the brim) [![Photo of the front and",
"clip I printed has extra extrusion on the inside and",
"and back of a 3D printed clip showing extra extrusion](https://i.stack.imgur.com/WlK7I.jpg",
"noticed that the nozzle will pause at the seam for",
"clip showing extra extrusion](https://i.stack.imgur.com/WlK7I.jpg \"Photo of the front and back",
"seam but why would it also appear on the outside",
"print settings are needed to solve this problem, but will",
"this problem, but will edit the question when I get",
"I recently purchased a spool of PETG to try working",
"seam and retractions\") I have printed the same clip in",
"same clip in PLA without any printing errors. What setting",
"the inside and outside. I have noticed that the nozzle",
"on the inside and outside. I have noticed that the",
"Preview of the model showing the seam and retractions\") I",
"outside of the print? [I don't know what relevant print",
"photo, the clip I printed has extra extrusion on the",
"showing extra extrusion\") I positioned the seam on the inside",
"\"Photo of the front and back of a 3D printed",
"caused by the seam but why would it also appear",
"so I can get rid of the extra plastic on",
"in PLA without any printing errors. What setting within Prusaslicer",
"of a 3D printed clip showing extra extrusion\")](https://i.stack.imgur.com/WlK7I.jpg \"Photo of",
"in Prusaslicer but one, in particular, is giving me a",
"the model showing the seam and retractions\") I have printed",
"Elephant's foot, I just didn't clean off all the brim)",
"of the model. I know that the extra extrusion is",
"Prusaslicer but one, in particular, is giving me a problem.",
"a 3D printed clip showing extra extrusion\") I positioned the",
"all the brim) [![Photo of the front and back of",
"printed clip showing extra extrusion\")](https://i.stack.imgur.com/WlK7I.jpg \"Photo of the front and",
"5 secs before continuing. (The bottom is not Elephant's foot,",
"extrusion](https://i.stack.imgur.com/WlK7I.jpg \"Photo of the front and back of a 3D",
"of a 3D printed clip showing extra extrusion\") I positioned",
"of the model? [![Screenshot of the Prusaslicer Preview of the",
"I can get rid of the extra plastic on the",
"I positioned the seam on the inside of the model.",
"and retractions](https://i.stack.imgur.com/3RwLE.png \"Screenshot of the Prusaslicer Preview of the model",
"extra plastic on the inside and outside of the print?",
"the settings in Prusaslicer but one, in particular, is giving",
"of the extra plastic on the inside and outside of",
"clip showing extra extrusion\")](https://i.stack.imgur.com/WlK7I.jpg \"Photo of the front and back",
"don't know what relevant print settings are needed to solve",
"it. I have managed to dial in most of the",
"in the photo, the clip I printed has extra extrusion",
"front and back of a 3D printed clip showing extra",
"the front and back of a 3D printed clip showing",
"a 3D printed clip showing extra extrusion\")](https://i.stack.imgur.com/WlK7I.jpg \"Photo of the",
"by the seam but why would it also appear on",
"print? [I don't know what relevant print settings are needed",
"without any printing errors. What setting within Prusaslicer needs to",
"but one, in particular, is giving me a problem. As",
"is caused by the seam but why would it also",
"extra extrusion\") I positioned the seam on the inside of",
"the same clip in PLA without any printing errors. What",
"know that the extra extrusion is caused by the seam",
"back of a 3D printed clip showing extra extrusion](https://i.stack.imgur.com/WlK7I.jpg \"Photo",
"within Prusaslicer needs to change so I can get rid",
"secs before continuing. (The bottom is not Elephant's foot, I",
"with it. I have managed to dial in most of",
"managed to dial in most of the settings in Prusaslicer",
"the extra plastic on the inside and outside of the",
"[I don't know what relevant print settings are needed to",
"the print? [I don't know what relevant print settings are",
"3D printed clip showing extra extrusion\") I positioned the seam",
"continuing. (The bottom is not Elephant's foot, I just didn't",
"bottom is not Elephant's foot, I just didn't clean off",
"would it also appear on the outside of the model?",
"Prusaslicer needs to change so I can get rid of",
"of the model showing the seam and retractions](https://i.stack.imgur.com/3RwLE.png \"Screenshot of",
"working with it. I have managed to dial in most",
"PETG to try working with it. I have managed to",
"model showing the seam and retractions\") I have printed the",
"and outside. I have noticed that the nozzle will pause",
"in particular, is giving me a problem. As seen in",
"that the nozzle will pause at the seam for about",
"and outside of the print? [I don't know what relevant",
"try working with it. I have managed to dial in",
"seam and retractions](https://i.stack.imgur.com/3RwLE.png \"Screenshot of the Prusaslicer Preview of the",
"a problem. As seen in the photo, the clip I",
"[![Photo of the front and back of a 3D printed",
"of a 3D printed clip showing extra extrusion](https://i.stack.imgur.com/WlK7I.jpg \"Photo of",
"settings are needed to solve this problem, but will edit",
"seam on the inside of the model. I know that",
"any printing errors. What setting within Prusaslicer needs to change",
"the seam on the inside of the model. I know",
"have printed the same clip in PLA without any printing",
"brim) [![Photo of the front and back of a 3D",
"model? [![Screenshot of the Prusaslicer Preview of the model showing",
"I have printed the same clip in PLA without any",
"outside. I have noticed that the nozzle will pause at",
"clip in PLA without any printing errors. What setting within",
"relevant print settings are needed to solve this problem, but",
"and retractions\")](https://i.stack.imgur.com/3RwLE.png \"Screenshot of the Prusaslicer Preview of the model",
"extrusion\")](https://i.stack.imgur.com/WlK7I.jpg \"Photo of the front and back of a 3D",
"and back of a 3D printed clip showing extra extrusion\")](https://i.stack.imgur.com/WlK7I.jpg",
"foot, I just didn't clean off all the brim) [![Photo",
"are needed to solve this problem, but will edit the",
"but will edit the question when I get some guidance.]",
"rid of the extra plastic on the inside and outside",
"of the settings in Prusaslicer but one, in particular, is",
"settings in Prusaslicer but one, in particular, is giving me",
"a 3D printed clip showing extra extrusion](https://i.stack.imgur.com/WlK7I.jpg \"Photo of the",
"3D printed clip showing extra extrusion](https://i.stack.imgur.com/WlK7I.jpg \"Photo of the front",
"I know that the extra extrusion is caused by the",
"purchased a spool of PETG to try working with it.",
"I printed has extra extrusion on the inside and outside.",
"before continuing. (The bottom is not Elephant's foot, I just",
"printing errors. What setting within Prusaslicer needs to change so",
"can get rid of the extra plastic on the inside",
"the model showing the seam and retractions\")](https://i.stack.imgur.com/3RwLE.png \"Screenshot of the",
"showing extra extrusion](https://i.stack.imgur.com/WlK7I.jpg \"Photo of the front and back of",
"of the print? [I don't know what relevant print settings",
"the seam for about 5 secs before continuing. (The bottom",
"the seam but why would it also appear on the",
"inside and outside. I have noticed that the nozzle will",
"model. I know that the extra extrusion is caused by",
"to solve this problem, but will edit the question when",
"retractions](https://i.stack.imgur.com/3RwLE.png \"Screenshot of the Prusaslicer Preview of the model showing",
"positioned the seam on the inside of the model. I",
"extrusion on the inside and outside. I have noticed that",
"get rid of the extra plastic on the inside and",
"one, in particular, is giving me a problem. As seen",
"most of the settings in Prusaslicer but one, in particular,",
"just didn't clean off all the brim) [![Photo of the",
"me a problem. As seen in the photo, the clip",
"appear on the outside of the model? [![Screenshot of the",
"has extra extrusion on the inside and outside. I have",
"of the model showing the seam and retractions\")](https://i.stack.imgur.com/3RwLE.png \"Screenshot of",
"What setting within Prusaslicer needs to change so I can",
"the extra extrusion is caused by the seam but why",
"and back of a 3D printed clip showing extra extrusion\")",
"retractions\") I have printed the same clip in PLA without",
"problem, but will edit the question when I get some",
"spool of PETG to try working with it. I have",
"Prusaslicer Preview of the model showing the seam and retractions](https://i.stack.imgur.com/3RwLE.png",
"about 5 secs before continuing. (The bottom is not Elephant's",
"(The bottom is not Elephant's foot, I just didn't clean",
"but why would it also appear on the outside of",
"the seam and retractions\") I have printed the same clip",
"to try working with it. I have managed to dial",
"extra extrusion](https://i.stack.imgur.com/WlK7I.jpg \"Photo of the front and back of a",
"the photo, the clip I printed has extra extrusion on",
"on the outside of the model? [![Screenshot of the Prusaslicer",
"particular, is giving me a problem. As seen in the",
"seam and retractions\")](https://i.stack.imgur.com/3RwLE.png \"Screenshot of the Prusaslicer Preview of the",
"back of a 3D printed clip showing extra extrusion\")](https://i.stack.imgur.com/WlK7I.jpg \"Photo",
"of PETG to try working with it. I have managed",
"the model? [![Screenshot of the Prusaslicer Preview of the model",
"I have managed to dial in most of the settings",
"is giving me a problem. As seen in the photo,",
"to change so I can get rid of the extra",
"plastic on the inside and outside of the print? [I",
"solve this problem, but will edit the question when I",
"As seen in the photo, the clip I printed has",
"extra extrusion on the inside and outside. I have noticed",
"Prusaslicer Preview of the model showing the seam and retractions\")](https://i.stack.imgur.com/3RwLE.png",
"seam for about 5 secs before continuing. (The bottom is",
"off all the brim) [![Photo of the front and back",
"extra extrusion\")](https://i.stack.imgur.com/WlK7I.jpg \"Photo of the front and back of a",
"the seam and retractions\")](https://i.stack.imgur.com/3RwLE.png \"Screenshot of the Prusaslicer Preview of",
"\"Screenshot of the Prusaslicer Preview of the model showing the",
"on the inside of the model. I know that the",
"inside and outside of the print? [I don't know what",
"clip showing extra extrusion\") I positioned the seam on the",
"change so I can get rid of the extra plastic",
"on the inside and outside of the print? [I don't",
"recently purchased a spool of PETG to try working with",
"retractions\")](https://i.stack.imgur.com/3RwLE.png \"Screenshot of the Prusaslicer Preview of the model showing",
"also appear on the outside of the model? [![Screenshot of",
"printed has extra extrusion on the inside and outside. I",
"I just didn't clean off all the brim) [![Photo of",
"needs to change so I can get rid of the",
"why would it also appear on the outside of the",
"the Prusaslicer Preview of the model showing the seam and",
"nozzle will pause at the seam for about 5 secs",
"have noticed that the nozzle will pause at the seam",
"the seam and retractions](https://i.stack.imgur.com/3RwLE.png \"Screenshot of the Prusaslicer Preview of",
"dial in most of the settings in Prusaslicer but one,",
"didn't clean off all the brim) [![Photo of the front",
"the brim) [![Photo of the front and back of a",
"showing the seam and retractions\")](https://i.stack.imgur.com/3RwLE.png \"Screenshot of the Prusaslicer Preview",
"of the model showing the seam and retractions\") I have",
"showing the seam and retractions\") I have printed the same",
"the inside of the model. I know that the extra",
"Preview of the model showing the seam and retractions\")](https://i.stack.imgur.com/3RwLE.png \"Screenshot",
"errors. What setting within Prusaslicer needs to change so I",
"Preview of the model showing the seam and retractions](https://i.stack.imgur.com/3RwLE.png \"Screenshot",
"have managed to dial in most of the settings in",
"the model showing the seam and retractions](https://i.stack.imgur.com/3RwLE.png \"Screenshot of the",
"a spool of PETG to try working with it. I",
"extrusion is caused by the seam but why would it",
"showing the seam and retractions](https://i.stack.imgur.com/3RwLE.png \"Screenshot of the Prusaslicer Preview",
"the outside of the model? [![Screenshot of the Prusaslicer Preview",
"showing extra extrusion\")](https://i.stack.imgur.com/WlK7I.jpg \"Photo of the front and back of",
"Prusaslicer Preview of the model showing the seam and retractions\")",
"needed to solve this problem, but will edit the question",
"the inside and outside of the print? [I don't know",
"I have noticed that the nozzle will pause at the",
"and retractions\") I have printed the same clip in PLA",
"for about 5 secs before continuing. (The bottom is not",
"the model. I know that the extra extrusion is caused",
"of the Prusaslicer Preview of the model showing the seam",
"extrusion\") I positioned the seam on the inside of the",
"seen in the photo, the clip I printed has extra",
"that the extra extrusion is caused by the seam but",
"not Elephant's foot, I just didn't clean off all the",
"giving me a problem. As seen in the photo, the",
"setting within Prusaslicer needs to change so I can get",
"know what relevant print settings are needed to solve this",
"outside of the model? [![Screenshot of the Prusaslicer Preview of",
"will pause at the seam for about 5 secs before",
"it also appear on the outside of the model? [![Screenshot",
"extra extrusion is caused by the seam but why would",
"back of a 3D printed clip showing extra extrusion\") I",
"[![Screenshot of the Prusaslicer Preview of the model showing the",
"model showing the seam and retractions](https://i.stack.imgur.com/3RwLE.png \"Screenshot of the Prusaslicer",
"what relevant print settings are needed to solve this problem,",
"problem. As seen in the photo, the clip I printed",
"at the seam for about 5 secs before continuing. (The",
"pause at the seam for about 5 secs before continuing.",
"3D printed clip showing extra extrusion\")](https://i.stack.imgur.com/WlK7I.jpg \"Photo of the front",
"is not Elephant's foot, I just didn't clean off all",
"printed the same clip in PLA without any printing errors.",
"to dial in most of the settings in Prusaslicer but",
"printed clip showing extra extrusion](https://i.stack.imgur.com/WlK7I.jpg \"Photo of the front and",
"PLA without any printing errors. What setting within Prusaslicer needs",
"inside of the model. I know that the extra extrusion",
"in most of the settings in Prusaslicer but one, in",
"the nozzle will pause at the seam for about 5",
"of the front and back of a 3D printed clip",
"model showing the seam and retractions\")](https://i.stack.imgur.com/3RwLE.png \"Screenshot of the Prusaslicer"
] |
[
"250 °C (below 230 °C it does not come out",
"gap is lower, almost all the filament sticks to the",
"the nozzle * fan speed from 0 % to 50",
"before each print I level and calibrate the buildplate Honestly",
"purple glue from Dremel * bed temperature from 70 to",
"all the filament sticks to the nozzle * fan speed",
"print speed from 50 to 70 mm/s * nozzle gap",
"nozzle and 70-80 °C for the bed. Here what I",
"70-80 °C for the bed. Here what I tried so",
"to 0.4 mm (in step of 0.1 mm). The video",
"The filament is PETG from [JAYO](https://www.amazon.it/gp/product/B08BRDT3X8/) and the printer is",
"with the maximum gap. When the gap is lower, almost",
"the filament sticks to the nozzle * fan speed from",
"nozzle * before each print I level and calibrate the",
"the maximum gap. When the gap is lower, almost all",
"°C * nozzle temperature from 235 to 250 °C (below",
"fan speed from 0 % to 50 % * the",
"filament sticks to the nozzle * fan speed from 0",
"issue: The filament is PETG from [JAYO](https://www.amazon.it/gp/product/B08BRDT3X8/) and the printer",
"use 220-250 °C for the nozzle and 70-80 °C for",
"[JAYO](https://www.amazon.it/gp/product/B08BRDT3X8/) and the printer is a Dremel 3D45. As you",
"from 0.0 to 0.4 mm (in step of 0.1 mm).",
"I don't know what to do further. From your experience",
"filament dryer * clean up the nozzle * before each",
"what should I do to avoid what you see in",
"your experience what should I do to avoid what you",
"a Dremel 3D45. As you can see, the filament does",
"from Dremel * bed temperature from 70 to 80 °C",
"buildplate. The manufacturer suggests to use 220-250 °C for the",
"manufacturer suggests to use 220-250 °C for the nozzle and",
"for the nozzle and 70-80 °C for the bed. Here",
"nozzle * fan speed from 0 % to 50 %",
"* fan speed from 0 % to 50 % *",
"know what to do further. From your experience what should",
"experience what should I do to avoid what you see",
"°C (below 230 °C it does not come out from",
"[this](https://3dprinting.stackexchange.com/questions/722/petg-collecting-on-the-extruder). Here a video that shows the issue: The filament",
"[this](https://3dprinting.stackexchange.com/questions/7122/petg-filament-doesnt-stick-reliably-to-fake-buildtak-surface) and [this](https://3dprinting.stackexchange.com/questions/722/petg-collecting-on-the-extruder). Here a video that shows the issue:",
"filament is PETG from [JAYO](https://www.amazon.it/gp/product/B08BRDT3X8/) and the printer is a",
"to do further. From your experience what should I do",
"of 0.1 mm). The video was taken with the maximum",
"print I level and calibrate the buildplate Honestly I don't",
"does not come out from the nozzle at all) *",
"homework reading similar questions, like [this](https://3dprinting.stackexchange.com/questions/8296/petg-sticking-to-nozzle), [this](https://3dprinting.stackexchange.com/questions/7122/petg-filament-doesnt-stick-reliably-to-fake-buildtak-surface) and [this](https://3dprinting.stackexchange.com/questions/722/petg-collecting-on-the-extruder). Here",
"50 % * the filament is inside a filament dryer",
"% * the filament is inside a filament dryer *",
"that shows the issue: The filament is PETG from [JAYO](https://www.amazon.it/gp/product/B08BRDT3X8/)",
"temperature from 235 to 250 °C (below 230 °C it",
"°C for the nozzle and 70-80 °C for the bed.",
"nozzle gap from 0.0 to 0.4 mm (in step of",
"suggests to use 220-250 °C for the nozzle and 70-80",
"I tried so far: * add purple glue from Dremel",
"and [this](https://3dprinting.stackexchange.com/questions/722/petg-collecting-on-the-extruder). Here a video that shows the issue: The",
"* nozzle gap from 0.0 to 0.4 mm (in step",
"a filament dryer * clean up the nozzle * before",
"the filament is inside a filament dryer * clean up",
"stick on the buildplate. The manufacturer suggests to use 220-250",
"lower, almost all the filament sticks to the nozzle *",
"speed from 0 % to 50 % * the filament",
"* bed temperature from 70 to 80 °C * nozzle",
"The manufacturer suggests to use 220-250 °C for the nozzle",
"[this](https://3dprinting.stackexchange.com/questions/8296/petg-sticking-to-nozzle), [this](https://3dprinting.stackexchange.com/questions/7122/petg-filament-doesnt-stick-reliably-to-fake-buildtak-surface) and [this](https://3dprinting.stackexchange.com/questions/722/petg-collecting-on-the-extruder). Here a video that shows the",
"°C it does not come out from the nozzle at",
"to 80 °C * nozzle temperature from 235 to 250",
"70 mm/s * nozzle gap from 0.0 to 0.4 mm",
"step of 0.1 mm). The video was taken with the",
"from 235 to 250 °C (below 230 °C it does",
"220-250 °C for the nozzle and 70-80 °C for the",
"maximum gap. When the gap is lower, almost all the",
"the nozzle at all) * print speed from 50 to",
"inside a filament dryer * clean up the nozzle *",
"for the bed. Here what I tried so far: *",
"is a Dremel 3D45. As you can see, the filament",
"on the buildplate. The manufacturer suggests to use 220-250 °C",
"Here what I tried so far: * add purple glue",
"level and calibrate the buildplate Honestly I don't know what",
"the issue: The filament is PETG from [JAYO](https://www.amazon.it/gp/product/B08BRDT3X8/) and the",
"50 to 70 mm/s * nozzle gap from 0.0 to",
"I did my homework reading similar questions, like [this](https://3dprinting.stackexchange.com/questions/8296/petg-sticking-to-nozzle), [this](https://3dprinting.stackexchange.com/questions/7122/petg-filament-doesnt-stick-reliably-to-fake-buildtak-surface)",
"gap from 0.0 to 0.4 mm (in step of 0.1",
"similar questions, like [this](https://3dprinting.stackexchange.com/questions/8296/petg-sticking-to-nozzle), [this](https://3dprinting.stackexchange.com/questions/7122/petg-filament-doesnt-stick-reliably-to-fake-buildtak-surface) and [this](https://3dprinting.stackexchange.com/questions/722/petg-collecting-on-the-extruder). Here a video",
"Here a video that shows the issue: The filament is",
"can see, the filament does not stick on the buildplate.",
"(below 230 °C it does not come out from the",
"see, the filament does not stick on the buildplate. The",
"The video was taken with the maximum gap. When the",
"come out from the nozzle at all) * print speed",
"what to do further. From your experience what should I",
"printer is a Dremel 3D45. As you can see, the",
"and the printer is a Dremel 3D45. As you can",
"0.0 to 0.4 mm (in step of 0.1 mm). The",
"From your experience what should I do to avoid what",
"nozzle temperature from 235 to 250 °C (below 230 °C",
"at all) * print speed from 50 to 70 mm/s",
"Dremel 3D45. As you can see, the filament does not",
"from 70 to 80 °C * nozzle temperature from 235",
"almost all the filament sticks to the nozzle * fan",
"questions, like [this](https://3dprinting.stackexchange.com/questions/8296/petg-sticking-to-nozzle), [this](https://3dprinting.stackexchange.com/questions/7122/petg-filament-doesnt-stick-reliably-to-fake-buildtak-surface) and [this](https://3dprinting.stackexchange.com/questions/722/petg-collecting-on-the-extruder). Here a video that",
"to 70 mm/s * nozzle gap from 0.0 to 0.4",
"temperature from 70 to 80 °C * nozzle temperature from",
"reading similar questions, like [this](https://3dprinting.stackexchange.com/questions/8296/petg-sticking-to-nozzle), [this](https://3dprinting.stackexchange.com/questions/7122/petg-filament-doesnt-stick-reliably-to-fake-buildtak-surface) and [this](https://3dprinting.stackexchange.com/questions/722/petg-collecting-on-the-extruder). Here a",
"°C for the bed. Here what I tried so far:",
"* add purple glue from Dremel * bed temperature from",
"* before each print I level and calibrate the buildplate",
"calibrate the buildplate Honestly I don't know what to do",
"70 to 80 °C * nozzle temperature from 235 to",
"not come out from the nozzle at all) * print",
"the printer is a Dremel 3D45. As you can see,",
"to use 220-250 °C for the nozzle and 70-80 °C",
"out from the nozzle at all) * print speed from",
"the buildplate Honestly I don't know what to do further.",
"like [this](https://3dprinting.stackexchange.com/questions/8296/petg-sticking-to-nozzle), [this](https://3dprinting.stackexchange.com/questions/7122/petg-filament-doesnt-stick-reliably-to-fake-buildtak-surface) and [this](https://3dprinting.stackexchange.com/questions/722/petg-collecting-on-the-extruder). Here a video that shows",
"what I tried so far: * add purple glue from",
"0.4 mm (in step of 0.1 mm). The video was",
"mm). The video was taken with the maximum gap. When",
"from [JAYO](https://www.amazon.it/gp/product/B08BRDT3X8/) and the printer is a Dremel 3D45. As",
"bed temperature from 70 to 80 °C * nozzle temperature",
"tried so far: * add purple glue from Dremel *",
"to 250 °C (below 230 °C it does not come",
"% to 50 % * the filament is inside a",
"Dremel * bed temperature from 70 to 80 °C *",
"you can see, the filament does not stick on the",
"0 % to 50 % * the filament is inside",
"my homework reading similar questions, like [this](https://3dprinting.stackexchange.com/questions/8296/petg-sticking-to-nozzle), [this](https://3dprinting.stackexchange.com/questions/7122/petg-filament-doesnt-stick-reliably-to-fake-buildtak-surface) and [this](https://3dprinting.stackexchange.com/questions/722/petg-collecting-on-the-extruder).",
"the bed. Here what I tried so far: * add",
"is inside a filament dryer * clean up the nozzle",
"I do to avoid what you see in the video?",
"PETG from [JAYO](https://www.amazon.it/gp/product/B08BRDT3X8/) and the printer is a Dremel 3D45.",
"is lower, almost all the filament sticks to the nozzle",
"the nozzle * before each print I level and calibrate",
"glue from Dremel * bed temperature from 70 to 80",
"was taken with the maximum gap. When the gap is",
"to 50 % * the filament is inside a filament",
"do further. From your experience what should I do to",
"video was taken with the maximum gap. When the gap",
"filament does not stick on the buildplate. The manufacturer suggests",
"to the nozzle * fan speed from 0 % to",
"When the gap is lower, almost all the filament sticks",
"a video that shows the issue: The filament is PETG",
"the nozzle and 70-80 °C for the bed. Here what",
"does not stick on the buildplate. The manufacturer suggests to",
"3D45. As you can see, the filament does not stick",
"(in step of 0.1 mm). The video was taken with",
"did my homework reading similar questions, like [this](https://3dprinting.stackexchange.com/questions/8296/petg-sticking-to-nozzle), [this](https://3dprinting.stackexchange.com/questions/7122/petg-filament-doesnt-stick-reliably-to-fake-buildtak-surface) and",
"gap. When the gap is lower, almost all the filament",
"not stick on the buildplate. The manufacturer suggests to use",
"far: * add purple glue from Dremel * bed temperature",
"from 50 to 70 mm/s * nozzle gap from 0.0",
"buildplate Honestly I don't know what to do further. From",
"and 70-80 °C for the bed. Here what I tried",
"mm (in step of 0.1 mm). The video was taken",
"should I do to avoid what you see in the",
"* clean up the nozzle * before each print I",
"Honestly I don't know what to do further. From your",
"all) * print speed from 50 to 70 mm/s *",
"* print speed from 50 to 70 mm/s * nozzle",
"filament is inside a filament dryer * clean up the",
"As you can see, the filament does not stick on",
"taken with the maximum gap. When the gap is lower,",
"clean up the nozzle * before each print I level",
"add purple glue from Dremel * bed temperature from 70",
"bed. Here what I tried so far: * add purple",
"speed from 50 to 70 mm/s * nozzle gap from",
"I level and calibrate the buildplate Honestly I don't know",
"* the filament is inside a filament dryer * clean",
"shows the issue: The filament is PETG from [JAYO](https://www.amazon.it/gp/product/B08BRDT3X8/) and",
"and calibrate the buildplate Honestly I don't know what to",
"further. From your experience what should I do to avoid",
"dryer * clean up the nozzle * before each print",
"80 °C * nozzle temperature from 235 to 250 °C",
"the buildplate. The manufacturer suggests to use 220-250 °C for",
"nozzle at all) * print speed from 50 to 70",
"up the nozzle * before each print I level and",
"from the nozzle at all) * print speed from 50",
"video that shows the issue: The filament is PETG from",
"don't know what to do further. From your experience what",
"from 0 % to 50 % * the filament is",
"it does not come out from the nozzle at all)",
"235 to 250 °C (below 230 °C it does not",
"230 °C it does not come out from the nozzle",
"mm/s * nozzle gap from 0.0 to 0.4 mm (in",
"0.1 mm). The video was taken with the maximum gap.",
"the gap is lower, almost all the filament sticks to",
"is PETG from [JAYO](https://www.amazon.it/gp/product/B08BRDT3X8/) and the printer is a Dremel",
"* nozzle temperature from 235 to 250 °C (below 230",
"each print I level and calibrate the buildplate Honestly I",
"the filament does not stick on the buildplate. The manufacturer",
"sticks to the nozzle * fan speed from 0 %",
"so far: * add purple glue from Dremel * bed"
] |
[
"using 200 g of filament. In comparison, with support =",
"default normal/tree support. The background is this: I am making",
"lot of support is needed. With support = normal the",
"With support = tree the time taken is 29.5 hours",
"tree the time taken is 29.5 hours using 200 g",
"rim of the hubcap on the bed. This means that",
"in quite well with the layer above it. (Perhaps a",
"this: I am making a hubcap with a 3D logo.",
"intended to snip away the mesh, but it blends in",
"to remove.) I am interested to know of others who",
"on the bed. This means that a lot of support",
"to designs which use a customized support instead of the",
"included some small brackets to hold the support. The time",
"[](https://i.stack.imgur.com/TfeLg.png) I intended to snip away the",
"the mesh, but it blends in quite well with the",
"& amount for tree support! Here is what the support",
"3D logo. I do not want to place the logo",
"= normal the print time taken is 36.5 hours using",
"course is not practical. So, I decided to make my",
"own support and I manually inserted it at a specified",
"the support looks like: [](https://i.stack.imgur.com/TfeLg.png) I intended",
"The background is this: I am making a hubcap with",
"not practical. So, I decided to make my own support",
"taken is 36.5 hours using 290 g of filament. With",
"29.5 hours using 200 g of filament. In comparison, with",
"instead of the slicer's default normal/tree support. The background is",
"This means that a lot of support is needed. With",
"it. The design included some small brackets to hold the",
"become very messy. So, I place the rim of the",
"like: [](https://i.stack.imgur.com/TfeLg.png) I intended to snip away",
"same as no support - about half the time &",
"the bed. This means that a lot of support is",
"want to place the logo on the print bed because",
"36.5 hours using 290 g of filament. With support =",
"not want to place the logo on the print bed",
"brackets to hold the support. The time taken and amount",
"am interested in references to designs which use a customized",
"place the rim of the hubcap on the bed. This",
"that a lot of support is needed. With support =",
"14.5 hours using 115 g of filament, but of course",
"top disk and the logo above it. The design included",
"means that a lot of support is needed. With support",
"- about half the time & amount for tree support!",
"of filament. With support = tree the time taken is",
"references to designs which use a customized support instead of",
"some small brackets to hold the support. The time taken",
"snip away the mesh, but it blends in quite well",
"bed because the logo will become very messy. So, I",
"is needed. With support = normal the print time taken",
"what the support looks like: [](https://i.stack.imgur.com/TfeLg.png) I",
"it. (Perhaps a finer mesh is easier to remove.) I",
"with a 3D logo. I do not want to place",
"g of filament, but of course is not practical. So,",
"print time taken is 36.5 hours using 290 g of",
"above it. (Perhaps a finer mesh is easier to remove.)",
"for tree support! Here is what the support looks like:",
"manually inserted it at a specified layer - just below",
"above it. The design included some small brackets to hold",
"logo on the print bed because the logo will become",
"the rim of the hubcap on the bed. This means",
"With support = normal the print time taken is 36.5",
"background is this: I am making a hubcap with a",
"the print bed because the logo will become very messy.",
"= none the time taken is 14.5 hours using 115",
"interested in references to designs which use a customized support",
"normal/tree support. The background is this: I am making a",
"I am interested in references to designs which use a",
"is easier to remove.) I am interested to know of",
"- just below the top disk and the logo above",
"design included some small brackets to hold the support. The",
"the same as no support - about half the time",
"time & amount for tree support! Here is what the",
"am making a hubcap with a 3D logo. I do",
"no support - about half the time & amount for",
"place the logo on the print bed because the logo",
"of filament is the same as no support - about",
"the top disk and the logo above it. The design",
"In comparison, with support = none the time taken is",
"support = tree the time taken is 29.5 hours using",
"amount of filament is the same as no support -",
"of the slicer's default normal/tree support. The background is this:",
"layer - just below the top disk and the logo",
"the logo above it. The design included some small brackets",
"of support is needed. With support = normal the print",
"which use a customized support instead of the slicer's default",
"it blends in quite well with the layer above it.",
"time taken is 29.5 hours using 200 g of filament.",
"and I manually inserted it at a specified layer -",
"using 290 g of filament. With support = tree the",
"support = normal the print time taken is 36.5 hours",
"the time taken is 14.5 hours using 115 g of",
"half the time & amount for tree support! Here is",
"hours using 115 g of filament, but of course is",
"very messy. So, I place the rim of the hubcap",
"support = none the time taken is 14.5 hours using",
"filament is the same as no support - about half",
"is 14.5 hours using 115 g of filament, but of",
"time taken and amount of filament is the same as",
"bed. This means that a lot of support is needed.",
"blends in quite well with the layer above it. (Perhaps",
"is the same as no support - about half the",
"my own support and I manually inserted it at a",
"a lot of support is needed. With support = normal",
"taken is 14.5 hours using 115 g of filament, but",
"hours using 290 g of filament. With support = tree",
"is 36.5 hours using 290 g of filament. With support",
"a customized support instead of the slicer's default normal/tree support.",
"115 g of filament, but of course is not practical.",
"support and I manually inserted it at a specified layer",
"making a hubcap with a 3D logo. I do not",
"support. The background is this: I am making a hubcap",
"I manually inserted it at a specified layer - just",
"specified layer - just below the top disk and the",
"tree support! Here is what the support looks like: [](https://i.stack.imgur.com/TfeLg.png) I intended to snip away the mesh, but it",
"use a customized support instead of the slicer's default normal/tree",
"normal the print time taken is 36.5 hours using 290",
"hold the support. The time taken and amount of filament",
"mesh is easier to remove.) I am interested to know",
"none the time taken is 14.5 hours using 115 g",
"customized support instead of the slicer's default normal/tree support. The",
"the print time taken is 36.5 hours using 290 g",
"time taken is 14.5 hours using 115 g of filament,",
"So, I place the rim of the hubcap on the",
"decided to make my own support and I manually inserted",
"a specified layer - just below the top disk and",
"support looks like: [](https://i.stack.imgur.com/TfeLg.png) I intended to",
"is this: I am making a hubcap with a 3D",
"well with the layer above it. (Perhaps a finer mesh",
"Here is what the support looks like: [](https://i.stack.imgur.com/TfeLg.png)",
"small brackets to hold the support. The time taken and",
"finer mesh is easier to remove.) I am interested to",
"using 115 g of filament, but of course is not",
"inserted it at a specified layer - just below the",
"the logo on the print bed because the logo will",
"needed. With support = normal the print time taken is",
"of filament. In comparison, with support = none the time",
"but of course is not practical. So, I decided to",
"interested to know of others who have designed customized supports.",
"make my own support and I manually inserted it at",
"practical. So, I decided to make my own support and",
"I am making a hubcap with a 3D logo. I",
"the time & amount for tree support! Here is what",
"So, I decided to make my own support and I",
"= tree the time taken is 29.5 hours using 200",
"about half the time & amount for tree support! Here",
"slicer's default normal/tree support. The background is this: I am",
"to place the logo on the print bed because the",
"I place the rim of the hubcap on the bed.",
"filament. In comparison, with support = none the time taken",
"of course is not practical. So, I decided to make",
"I decided to make my own support and I manually",
"to snip away the mesh, but it blends in quite",
"image description here](https://i.stack.imgur.com/TfeLg.png)](https://i.stack.imgur.com/TfeLg.png) I intended to snip away the mesh,",
"I am interested to know of others who have designed",
"taken is 29.5 hours using 200 g of filament. In",
"to hold the support. The time taken and amount of",
"with support = none the time taken is 14.5 hours",
"it at a specified layer - just below the top",
"g of filament. In comparison, with support = none the",
"to make my own support and I manually inserted it",
"with the layer above it. (Perhaps a finer mesh is",
"am interested to know of others who have designed customized",
"easier to remove.) I am interested to know of others",
"a 3D logo. I do not want to place the",
"hours using 200 g of filament. In comparison, with support",
"of the hubcap on the bed. This means that a",
"at a specified layer - just below the top disk",
"290 g of filament. With support = tree the time",
"on the print bed because the logo will become very",
"the slicer's default normal/tree support. The background is this: I",
"I intended to snip away the mesh, but it blends",
"logo will become very messy. So, I place the rim",
"is not practical. So, I decided to make my own",
"(Perhaps a finer mesh is easier to remove.) I am",
"the time taken is 29.5 hours using 200 g of",
"below the top disk and the logo above it. The",
"logo above it. The design included some small brackets to",
"the hubcap on the bed. This means that a lot",
"looks like: [](https://i.stack.imgur.com/TfeLg.png) I intended to snip",
"in references to designs which use a customized support instead",
"but it blends in quite well with the layer above",
"The time taken and amount of filament is the same",
"messy. So, I place the rim of the hubcap on",
"and the logo above it. The design included some small",
"the layer above it. (Perhaps a finer mesh is easier",
"comparison, with support = none the time taken is 14.5",
"taken and amount of filament is the same as no",
"just below the top disk and the logo above it.",
"remove.) I am interested to know of others who have",
"is 29.5 hours using 200 g of filament. In comparison,",
"designs which use a customized support instead of the slicer's",
"support - about half the time & amount for tree",
"the logo will become very messy. So, I place the",
"disk and the logo above it. The design included some",
"because the logo will become very messy. So, I place",
"time taken is 36.5 hours using 290 g of filament.",
"support! Here is what the support looks like: [](https://i.stack.imgur.com/TfeLg.png) I intended to snip away the mesh, but",
"filament, but of course is not practical. So, I decided",
"mesh, but it blends in quite well with the layer",
"as no support - about half the time & amount"
] |
[
"very well, because those are not reached by the electric",
"in metal by painting them with conductive paint (graphite or",
"with electroless catalytic palladium and then there are various options,",
"those are not reached by the electric field. I know",
"can be coated in metal by painting them with conductive",
"various options, for example electroless nickel or chrome. I tried",
"both FDM printed ABS and ABS-like resin prints in NaOH,",
"on how to metal plate 3D printed parts (by electroless",
"parts (by electroless plating, meaning no electricity involved) and can",
"electroless nickel or chrome. I tried to etch both FDM",
"of this process is that it does not coat insides",
"by the electric field. I know that in the industry",
"metal by painting them with conductive paint (graphite or copper",
"ABS is etched, then seeded with electroless catalytic palladium and",
"bath, without any effect. Does anyone have an idea on",
"after rinsing, dropped them in a commercial palladium activator and,",
"electroless nickel bath, without any effect. Does anyone have an",
"the industry for plating ABS-parts with chrome and other metals,",
"then after rinsing, dropped them in a commercial palladium activator",
"the chemicals used? I would prefer to mix them myself.",
"effect. Does anyone have an idea on how to metal",
"them in a commercial copper or nickel bath. The disadvantage",
"nickel bath, without any effect. Does anyone have an idea",
"etch both FDM printed ABS and ABS-like resin prints in",
"palladium activator and, after rinsing again, then in an electroless",
"seems to be usual) and then electroplating them in a",
"how to metal plate 3D printed parts (by electroless plating,",
"etched, then seeded with electroless catalytic palladium and then there",
"bath. The disadvantage of this process is that it does",
"for example electroless nickel or chrome. I tried to etch",
"them in a commercial palladium activator and, after rinsing again,",
"metal plate 3D printed parts (by electroless plating, meaning no",
"catalytic palladium and then there are various options, for example",
"ABS-parts with chrome and other metals, there is a process",
"or nickel bath. The disadvantage of this process is that",
"is that it does not coat insides very well, because",
"can shed some light on the chemicals used? I would",
"is a process used where first the ABS is etched,",
"there are various options, for example electroless nickel or chrome.",
"painting them with conductive paint (graphite or copper seems to",
"tried to etch both FDM printed ABS and ABS-like resin",
"on the chemicals used? I would prefer to mix them",
"parts can be coated in metal by painting them with",
"some light on the chemicals used? I would prefer to",
"then seeded with electroless catalytic palladium and then there are",
"example electroless nickel or chrome. I tried to etch both",
"copper or nickel bath. The disadvantage of this process is",
"in NaOH, then after rinsing, dropped them in a commercial",
"prints in NaOH, then after rinsing, dropped them in a",
"be usual) and then electroplating them in a commercial copper",
"well, because those are not reached by the electric field.",
"with chrome and other metals, there is a process used",
"Does anyone have an idea on how to metal plate",
"nickel bath. The disadvantage of this process is that it",
"3D printed parts can be coated in metal by painting",
"plating ABS-parts with chrome and other metals, there is a",
"involved) and can shed some light on the chemicals used?",
"a commercial palladium activator and, after rinsing again, then in",
"activator and, after rinsing again, then in an electroless nickel",
"rinsing again, then in an electroless nickel bath, without any",
"idea on how to metal plate 3D printed parts (by",
"dropped them in a commercial palladium activator and, after rinsing",
"disadvantage of this process is that it does not coat",
"chrome. I tried to etch both FDM printed ABS and",
"rinsing, dropped them in a commercial palladium activator and, after",
"with conductive paint (graphite or copper seems to be usual)",
"conductive paint (graphite or copper seems to be usual) and",
"and, after rinsing again, then in an electroless nickel bath,",
"options, for example electroless nickel or chrome. I tried to",
"coated in metal by painting them with conductive paint (graphite",
"and then electroplating them in a commercial copper or nickel",
"and then there are various options, for example electroless nickel",
"ABS-like resin prints in NaOH, then after rinsing, dropped them",
"industry for plating ABS-parts with chrome and other metals, there",
"know that 3D printed parts can be coated in metal",
"ABS and ABS-like resin prints in NaOH, then after rinsing,",
"3D printed parts (by electroless plating, meaning no electricity involved)",
"or copper seems to be usual) and then electroplating them",
"FDM printed ABS and ABS-like resin prints in NaOH, then",
"field. I know that in the industry for plating ABS-parts",
"no electricity involved) and can shed some light on the",
"not coat insides very well, because those are not reached",
"have an idea on how to metal plate 3D printed",
"then there are various options, for example electroless nickel or",
"for plating ABS-parts with chrome and other metals, there is",
"then electroplating them in a commercial copper or nickel bath.",
"process used where first the ABS is etched, then seeded",
"the electric field. I know that in the industry for",
"that 3D printed parts can be coated in metal by",
"The disadvantage of this process is that it does not",
"it does not coat insides very well, because those are",
"know that in the industry for plating ABS-parts with chrome",
"meaning no electricity involved) and can shed some light on",
"coat insides very well, because those are not reached by",
"shed some light on the chemicals used? I would prefer",
"an idea on how to metal plate 3D printed parts",
"NaOH, then after rinsing, dropped them in a commercial palladium",
"then in an electroless nickel bath, without any effect. Does",
"usual) and then electroplating them in a commercial copper or",
"(graphite or copper seems to be usual) and then electroplating",
"by painting them with conductive paint (graphite or copper seems",
"commercial palladium activator and, after rinsing again, then in an",
"reached by the electric field. I know that in the",
"plating, meaning no electricity involved) and can shed some light",
"electroplating them in a commercial copper or nickel bath. The",
"are various options, for example electroless nickel or chrome. I",
"(by electroless plating, meaning no electricity involved) and can shed",
"seeded with electroless catalytic palladium and then there are various",
"are not reached by the electric field. I know that",
"paint (graphite or copper seems to be usual) and then",
"this process is that it does not coat insides very",
"that it does not coat insides very well, because those",
"in an electroless nickel bath, without any effect. Does anyone",
"without any effect. Does anyone have an idea on how",
"a process used where first the ABS is etched, then",
"I tried to etch both FDM printed ABS and ABS-like",
"that in the industry for plating ABS-parts with chrome and",
"used where first the ABS is etched, then seeded with",
"insides very well, because those are not reached by the",
"the ABS is etched, then seeded with electroless catalytic palladium",
"metals, there is a process used where first the ABS",
"any effect. Does anyone have an idea on how to",
"I know that 3D printed parts can be coated in",
"printed parts can be coated in metal by painting them",
"does not coat insides very well, because those are not",
"there is a process used where first the ABS is",
"after rinsing again, then in an electroless nickel bath, without",
"electroless plating, meaning no electricity involved) and can shed some",
"I know that in the industry for plating ABS-parts with",
"to metal plate 3D printed parts (by electroless plating, meaning",
"electricity involved) and can shed some light on the chemicals",
"anyone have an idea on how to metal plate 3D",
"first the ABS is etched, then seeded with electroless catalytic",
"because those are not reached by the electric field. I",
"in a commercial palladium activator and, after rinsing again, then",
"to etch both FDM printed ABS and ABS-like resin prints",
"an electroless nickel bath, without any effect. Does anyone have",
"to be usual) and then electroplating them in a commercial",
"light on the chemicals used? I would prefer to mix",
"plate 3D printed parts (by electroless plating, meaning no electricity",
"printed parts (by electroless plating, meaning no electricity involved) and",
"or chrome. I tried to etch both FDM printed ABS",
"chrome and other metals, there is a process used where",
"other metals, there is a process used where first the",
"not reached by the electric field. I know that in",
"nickel or chrome. I tried to etch both FDM printed",
"electric field. I know that in the industry for plating",
"in a commercial copper or nickel bath. The disadvantage of",
"a commercial copper or nickel bath. The disadvantage of this",
"process is that it does not coat insides very well,",
"is etched, then seeded with electroless catalytic palladium and then",
"resin prints in NaOH, then after rinsing, dropped them in",
"where first the ABS is etched, then seeded with electroless",
"again, then in an electroless nickel bath, without any effect.",
"them with conductive paint (graphite or copper seems to be",
"printed ABS and ABS-like resin prints in NaOH, then after",
"be coated in metal by painting them with conductive paint",
"copper seems to be usual) and then electroplating them in",
"in the industry for plating ABS-parts with chrome and other",
"and ABS-like resin prints in NaOH, then after rinsing, dropped",
"palladium and then there are various options, for example electroless",
"electroless catalytic palladium and then there are various options, for",
"commercial copper or nickel bath. The disadvantage of this process",
"and can shed some light on the chemicals used? I",
"and other metals, there is a process used where first"
] |
[
"I know. This is a tramming (leveling - are these",
"back to what it was, then the print regains adhesion",
"a different filament. Using the hairspray again, I tried printing",
"auto-leveling with the Ender CR6 SE, I paid that extra",
"out properly. (extruding?) I have a Creality Ender CR6 SE.",
"close to the bed on the other side again. Now",
"speed to 70 %. Here is a picture of the",
"paid extra for the auto-leveling with the Ender CR6 SE,",
"the print speed to 70 %. Here is a picture",
"Print nozzle too close on the left, too far on",
"is with the print bed. I found that it can",
"picture of a few layers in (still of the raft):",
"water. This is the print if I leave it going:",
"the bed seems to be correct. However, if I keep",
"This is a tramming (leveling - are these words completely",
"wouldn't need to mess around with stuff like this. Is",
"suspected that the nozzle was in bad shape, so I",
"good. Also - as you can see, I used a",
"synonymous?) issue, but when I paid extra for the auto-leveling",
"the printbed with warm soapy water. This is the print",
"of a few layers in (still of the raft): [](https://i.stack.imgur.com/pQdGD.png) And here's a picture of a few",
"that, then the nozzle will be too close to the",
"raft): [](https://i.stack.imgur.com/JqnSe.jpg) Just before this print I",
"printer and get a cheaper one that I'm going to",
"front of the bed, the front goes down and the",
"do that, then the print thickness on that part of",
"the print bed. If I do that, then the print",
"of the bed, the front goes down and the back",
"bed temperatures and I've also tried on the upper end",
"printing. When my printer was new, I got loads of",
"did an auto-level and cleaned the printbed with warm soapy",
"to be correct. However, if I keep that pressure while",
"nozzle and 60 °C print bed temperatures and I've also",
"If I put slight pressure on the front of the",
"upper end of the recommended temperatures at 230 °C and",
"print I did an auto-level and cleaned the printbed with",
"So I've found something that's probably not a good thing",
"extra for the auto-leveling with the Ender CR6 SE, I",
"description here](https://i.stack.imgur.com/rMBag.png)](https://i.stack.imgur.com/rMBag.png) **Should I contact Creality and try to return",
"up with this: [](https://i.stack.imgur.com/PSSmF.png) **UPDATE 3** Ok,",
"with this: [](https://i.stack.imgur.com/PSSmF.png) **UPDATE 3** Ok, So",
"that I wouldn't need to mess around with stuff like",
"on the right: [](https://i.stack.imgur.com/rMBag.png) **Should I contact",
"bad. I suspect that the filament is not coming out",
"default 200 °C nozzle and 60 °C print bed temperatures",
"the front of the bed, the front goes down and",
"coming out properly. (extruding?) I have a Creality Ender CR6",
"the default 200 °C nozzle and 60 °C print bed",
"\"thinner\" than it should be, unless I push down slightly",
"out - that print is a 3D Benchy: [](https://i.stack.imgur.com/pQdGD.png)",
"get a print out - that print is a 3D",
"70 %. Here is a picture of the first layer",
"even now, the prints are still quite bad. I suspect",
"the print bed. I found that it can wobble. If",
"I think the problem is with the print bed. I",
"quite bad. I suspect that the filament is not coming",
"need some advice on it. I think the problem is",
"found something that's probably not a good thing and I",
"[](https://i.stack.imgur.com/vN9i5.png) But ended up with this: [](https://i.stack.imgur.com/rMBag.png) **Should I contact Creality and try to return the",
"description here](https://i.stack.imgur.com/7TBDn.jpg)](https://i.stack.imgur.com/7TBDn.jpg) Additional Info: I used the auto-level feature on",
"to mess around with stuff like this. Is this money",
"contact Creality and try to return the printer and get",
"used a different filament. Using the hairspray again, I tried",
"if I keep that pressure while the nozzle goes around",
"to what it was, then the print regains adhesion (on",
"front goes down and the back goes up. Not by",
"used Cura Slicer for slicing. When using the hairspray method,",
"it. I think the problem is with the print bed.",
"I did an auto-level and cleaned the printbed with warm",
"the auto-level feature on the CR 6 SE before any",
"White PLA. I've tried using the default 200 °C nozzle",
"SE, I paid that extra so that I wouldn't need",
"Benchy: [](https://i.stack.imgur.com/cdXfj.png) Not looking too good. Also",
"that extra so that I wouldn't need to mess around",
"but even now, the prints are still quite bad. I",
"will be too close to the bed on the other",
"print regains adhesion (on that side). However, if I leave",
"get a cheaper one that I'm going to have to",
"goes back to what it was, then the print regains",
"a 3D Benchy: [](https://i.stack.imgur.com/cdXfj.png) Not looking too",
"Just before this print I did an auto-level and cleaned",
"I suspect that the filament is not coming out properly.",
"now they're all failing. I suspected that the nozzle was",
"was in bad shape, so I replaced it, but even",
"when I paid extra for the auto-leveling with the Ender",
"be too close to the bed on the other side",
"probably not a good thing and I need some advice",
"picture of the first layer of a raft: [](https://i.stack.imgur.com/cdXfj.png) Not looking too good. Also -",
"at 230 °C and 70 °C. I've also tried reducing",
"using the hairspray method, I managed to get a print",
"up. Not by much, but there's definite give. When I",
"the circle is \"thinner\" than it should be, unless I",
"also tried reducing the print speed to 70 %. Here",
"like that, then the nozzle will be too close to",
"But ended up with this: [](https://i.stack.imgur.com/PSSmF.png) **UPDATE",
"image description here](https://i.stack.imgur.com/7TBDn.jpg)](https://i.stack.imgur.com/7TBDn.jpg) Additional Info: I used the auto-level feature",
"with stuff like this. Is this money wasted? Print nozzle",
"can wobble. If I put slight pressure on the front",
"left of the circle is \"thinner\" than it should be,",
"a cheaper one that I'm going to have to manually",
"printing this: [](https://i.stack.imgur.com/vN9i5.png) But ended up with",
"far on the right: [](https://i.stack.imgur.com/rMBag.png) **Should I",
"60 °C print bed temperatures and I've also tried on",
"new, I got loads of really good prints, however, now",
"**Should I contact Creality and try to return the printer",
"looking too good. Also - as you can see, I",
"so I replaced it, but even now, the prints are",
"to get a print out - that print is a",
"I've also tried on the upper end of the recommended",
"that it can wobble. If I put slight pressure on",
"tramming (leveling - are these words completely synonymous?) issue, but",
"print out - that print is a 3D Benchy: [](https://i.stack.imgur.com/7TBDn.jpg) Additional Info: I used the auto-level",
"using Overture Matte White PLA. I've tried using the default",
"feature on the CR 6 SE before any of the",
"here's a picture of a few layers in (still of",
"is a tramming (leveling - are these words completely synonymous?)",
"of the circle is \"thinner\" than it should be, unless",
"as you can see, I used a different filament. Using",
"the back goes up. Not by much, but there's definite",
"words completely synonymous?) issue, but when I paid extra for",
"I put slight pressure on the front of the bed,",
"I've also tried reducing the print speed to 70 %.",
"it should be, unless I push down slightly on the",
"on the print bed. If I do that, then the",
"back goes up. Not by much, but there's definite give.",
"this: [](https://i.stack.imgur.com/vN9i5.png) But ended up with this:",
"°C nozzle and 60 °C print bed temperatures and I've",
"soon as I release the pressure and the print bed",
"replaced it, but even now, the prints are still quite",
"I used the auto-level feature on the CR 6 SE",
"layers in (still of the raft): [](https://i.stack.imgur.com/JqnSe.jpg)",
"goes down and the back goes up. Not by much,",
"auto-level feature on the CR 6 SE before any of",
"the print if I leave it going: [](https://i.stack.imgur.com/pQdGD.png) And here's",
"and 70 °C. I've also tried reducing the print speed",
"it like that, then the nozzle will be too close",
"and used Cura Slicer for slicing. When using the hairspray",
"paid that extra so that I wouldn't need to mess",
"However, if I leave it like that, then the nozzle",
"goes around then the print loses adhesion. As soon as",
"bed seems to be correct. However, if I keep that",
"correct. However, if I keep that pressure while the nozzle",
"Not looking too good. Also - as you can see,",
"that part of the bed seems to be correct. However,",
"This is the print if I leave it going: [](https://i.stack.imgur.com/vN9i5.png) But",
"and the back goes up. Not by much, but there's",
"tried printing this: [](https://i.stack.imgur.com/vN9i5.png) But ended up",
"like this. Is this money wasted? Print nozzle too close",
"this. Is this money wasted? Print nozzle too close on",
"part of the bed seems to be correct. However, if",
"°C print bed temperatures and I've also tried on the",
"ended up with this: [](https://i.stack.imgur.com/PSSmF.png) **UPDATE 3**",
"shape, so I replaced it, but even now, the prints",
"thickness on that part of the bed seems to be",
"I do that, then the print thickness on that part",
"too close to the bed on the other side again.",
"tried reducing the print speed to 70 %. Here is",
"on the CR 6 SE before any of the pictures",
"using the default 200 °C nozzle and 60 °C print",
"- as you can see, I used a different filament.",
"to the bed on the other side again. Now I",
"good thing and I need some advice on it. I",
"then the nozzle will be too close to the bed",
"print bed. If I do that, then the print thickness",
"the print loses adhesion. As soon as I release the",
"bed goes back to what it was, then the print",
"pressure on the front of the bed, the front goes",
"what it was, then the print regains adhesion (on that",
"Matte White PLA. I've tried using the default 200 °C",
"tried on the upper end of the recommended temperatures at",
"recommended temperatures at 230 °C and 70 °C. I've also",
"here](https://i.stack.imgur.com/JqnSe.jpg)](https://i.stack.imgur.com/JqnSe.jpg) Just before this print I did an auto-level and",
"in bad shape, so I replaced it, but even now,",
"it was, then the print regains adhesion (on that side).",
"SE before any of the pictures and used Cura Slicer",
"I've tried using the default 200 °C nozzle and 60",
"still quite bad. I suspect that the filament is not",
"Ender CR6 SE. and I'm using Overture Matte White PLA.",
"description here](https://i.stack.imgur.com/JqnSe.jpg)](https://i.stack.imgur.com/JqnSe.jpg) Just before this print I did an auto-level",
"to return the printer and get a cheaper one that",
"circle, the left of the circle is \"thinner\" than it",
"I leave it like that, then the nozzle will be",
"first layer of a raft: [](https://i.stack.imgur.com/pQdGD.png) And",
"found that it can wobble. If I put slight pressure",
"(leveling - are these words completely synonymous?) issue, but when",
"the left of the circle is \"thinner\" than it should",
"before this print I did an auto-level and cleaned the",
"need to mess around with stuff like this. Is this",
"However, if I keep that pressure while the nozzle goes",
"the right: [](https://i.stack.imgur.com/rMBag.png) **Should I contact Creality",
"is a 3D Benchy: [](https://i.stack.imgur.com/cdXfj.png) Not looking",
"adhesion (on that side). However, if I leave it like",
"the recommended temperatures at 230 °C and 70 °C. I've",
"of the pictures and used Cura Slicer for slicing. When",
"is the print if I leave it going: [](https://i.stack.imgur.com/JqnSe.jpg) Just before this print I did an",
"I keep that pressure while the nozzle goes around then",
"here](https://i.stack.imgur.com/7TBDn.jpg)](https://i.stack.imgur.com/7TBDn.jpg) Additional Info: I used the auto-level feature on the",
"the hairspray method, I managed to get a print out",
"and I'm using Overture Matte White PLA. I've tried using",
"print speed to 70 %. Here is a picture of",
"give. When I print a big circle, the left of",
"slight pressure on the front of the bed, the front",
"70 °C. I've also tried reducing the print speed to",
"cleaned the printbed with warm soapy water. This is the",
"print is a 3D Benchy: [](https://i.stack.imgur.com/cdXfj.png) Not",
"I'm very new to 3D printing. When my printer was",
"print a big circle, the left of the circle is",
"of the recommended temperatures at 230 °C and 70 °C.",
"Using the hairspray again, I tried printing this: [](https://i.stack.imgur.com/cdXfj.png)",
"CR6 SE, I paid that extra so that I wouldn't",
"some advice on it. I think the problem is with",
"be correct. However, if I keep that pressure while the",
"as I release the pressure and the print bed goes",
"my printer was new, I got loads of really good",
"put slight pressure on the front of the bed, the",
"and I've also tried on the upper end of the",
"here](https://i.stack.imgur.com/vN9i5.png)](https://i.stack.imgur.com/vN9i5.png) But ended up with this: [](https://i.stack.imgur.com/PSSmF.png)",
"of really good prints, however, now they're all failing. I",
"any of the pictures and used Cura Slicer for slicing.",
"see, I used a different filament. Using the hairspray again,",
"I leave it going: [](https://i.stack.imgur.com/7TBDn.jpg) Additional Info:",
"soapy water. This is the print if I leave it",
"left, too far on the right: [](https://i.stack.imgur.com/rMBag.png)",
"I replaced it, but even now, the prints are still",
"is a picture of the first layer of a raft:",
"the bed on the other side again. Now I know.",
"230 °C and 70 °C. I've also tried reducing the",
"the nozzle goes around then the print loses adhesion. As",
"this: [](https://i.stack.imgur.com/PSSmF.png) **UPDATE 3** Ok, So I've",
"too far on the right: [](https://i.stack.imgur.com/rMBag.png) **Should",
"push down slightly on the print bed. If I do",
"warm soapy water. This is the print if I leave",
"mess around with stuff like this. Is this money wasted?",
"it going: [](https://i.stack.imgur.com/7TBDn.jpg) Additional Info: I used",
"printer was new, I got loads of really good prints,",
"bad shape, so I replaced it, but even now, the",
"all failing. I suspected that the nozzle was in bad",
"Info: I used the auto-level feature on the CR 6",
"are these words completely synonymous?) issue, but when I paid",
"bed. I found that it can wobble. If I put",
"definite give. When I print a big circle, the left",
"Ok, So I've found something that's probably not a good",
"the nozzle will be too close to the bed on",
"3D printing. When my printer was new, I got loads",
"As soon as I release the pressure and the print",
"the bed, the front goes down and the back goes",
"that's probably not a good thing and I need some",
"3** Ok, So I've found something that's probably not a",
"print loses adhesion. As soon as I release the pressure",
"prints, however, now they're all failing. I suspected that the",
"too good. Also - as you can see, I used",
"(extruding?) I have a Creality Ender CR6 SE. and I'm",
"on the front of the bed, the front goes down",
"then the print regains adhesion (on that side). However, if",
"that, then the print thickness on that part of the",
"be, unless I push down slightly on the print bed.",
"And here's a picture of a few layers in (still",
"the print thickness on that part of the bed seems",
"advice on it. I think the problem is with the",
"reducing the print speed to 70 %. Here is a",
"the printer and get a cheaper one that I'm going",
"the hairspray again, I tried printing this: [](https://i.stack.imgur.com/cdXfj.png) Not looking too good. Also - as you",
"on it. I think the problem is with the print",
"print bed temperatures and I've also tried on the upper",
"the prints are still quite bad. I suspect that the",
"[](https://i.stack.imgur.com/PSSmF.png) **UPDATE 3** Ok, So I've found",
"Is this money wasted? Print nozzle too close on the",
"the front goes down and the back goes up. Not",
"a picture of the first layer of a raft: [](https://i.stack.imgur.com/JqnSe.jpg) Just before this print I did",
"it can wobble. If I put slight pressure on the",
"3D Benchy: [](https://i.stack.imgur.com/cdXfj.png) Not looking too good.",
"know. This is a tramming (leveling - are these words",
"and the print bed goes back to what it was,",
"new to 3D printing. When my printer was new, I",
"Creality and try to return the printer and get a",
"circle is \"thinner\" than it should be, unless I push",
"and get a cheaper one that I'm going to have",
"loads of really good prints, however, now they're all failing.",
"around then the print loses adhesion. As soon as I",
"print if I leave it going: [](https://i.stack.imgur.com/7TBDn.jpg)",
"a picture of a few layers in (still of the",
"adhesion. As soon as I release the pressure and the",
"around with stuff like this. Is this money wasted? Print",
"pictures and used Cura Slicer for slicing. When using the",
"with the print bed. I found that it can wobble.",
"the pressure and the print bed goes back to what",
"Also - as you can see, I used a different",
"Overture Matte White PLA. I've tried using the default 200",
"raft: [](https://i.stack.imgur.com/pQdGD.png) And here's a picture of",
"again. Now I know. This is a tramming (leveling -",
"leave it going: [](https://i.stack.imgur.com/7TBDn.jpg) Additional Info: I",
"description here](https://i.stack.imgur.com/vN9i5.png)](https://i.stack.imgur.com/vN9i5.png) But ended up with this: [](https://i.stack.imgur.com/vN9i5.png)",
"of the bed seems to be correct. However, if I",
"but there's definite give. When I print a big circle,",
"I wouldn't need to mess around with stuff like this.",
"on that part of the bed seems to be correct.",
"side). However, if I leave it like that, then the",
"the Ender CR6 SE, I paid that extra so that",
"%. Here is a picture of the first layer of",
"stuff like this. Is this money wasted? Print nozzle too",
"to 3D printing. When my printer was new, I got",
"is not coming out properly. (extruding?) I have a Creality",
"of the raft): [](https://i.stack.imgur.com/JqnSe.jpg) Just before this",
"thing and I need some advice on it. I think",
"this money wasted? Print nozzle too close on the left,",
"going: [](https://i.stack.imgur.com/7TBDn.jpg) Additional Info: I used the",
"When using the hairspray method, I managed to get a",
"hairspray method, I managed to get a print out -",
"I release the pressure and the print bed goes back",
"few layers in (still of the raft): [](https://i.stack.imgur.com/JqnSe.jpg) Just before this print",
"regains adhesion (on that side). However, if I leave it",
"wasted? Print nozzle too close on the left, too far",
"CR 6 SE before any of the pictures and used",
"a print out - that print is a 3D Benchy:",
"(still of the raft): [](https://i.stack.imgur.com/JqnSe.jpg) Just before",
"and try to return the printer and get a cheaper",
"right: [](https://i.stack.imgur.com/rMBag.png) **Should I contact Creality and",
"down and the back goes up. Not by much, but",
"and I need some advice on it. I think the",
"printbed with warm soapy water. This is the print if",
"if I leave it going: [](https://i.stack.imgur.com/7TBDn.jpg) Additional",
"than it should be, unless I push down slightly on",
"If I do that, then the print thickness on that",
"the auto-leveling with the Ender CR6 SE, I paid that",
"leave it like that, then the nozzle will be too",
"not a good thing and I need some advice on",
"the pictures and used Cura Slicer for slicing. When using",
"that the filament is not coming out properly. (extruding?) I",
"different filament. Using the hairspray again, I tried printing this:",
"then the print loses adhesion. As soon as I release",
"pressure while the nozzle goes around then the print loses",
"of a raft: [](https://i.stack.imgur.com/pQdGD.png) And here's a",
"temperatures at 230 °C and 70 °C. I've also tried",
"Here is a picture of the first layer of a",
"extra so that I wouldn't need to mess around with",
"nozzle too close on the left, too far on the",
"the nozzle was in bad shape, so I replaced it,",
"the filament is not coming out properly. (extruding?) I have",
"Now I know. This is a tramming (leveling - are",
"200 °C nozzle and 60 °C print bed temperatures and",
"method, I managed to get a print out - that",
"**UPDATE 3** Ok, So I've found something that's probably not",
"the other side again. Now I know. This is a",
"Slicer for slicing. When using the hairspray method, I managed",
"but when I paid extra for the auto-leveling with the",
"a good thing and I need some advice on it.",
"for the auto-leveling with the Ender CR6 SE, I paid",
"description here](https://i.stack.imgur.com/pQdGD.png)](https://i.stack.imgur.com/pQdGD.png) And here's a picture of a few layers",
"a few layers in (still of the raft): [](https://i.stack.imgur.com/vN9i5.png) But ended",
"slicing. When using the hairspray method, I managed to get",
"tried using the default 200 °C nozzle and 60 °C",
"on the other side again. Now I know. This is",
"in (still of the raft): [](https://i.stack.imgur.com/JqnSe.jpg) Just",
"image description here](https://i.stack.imgur.com/rMBag.png)](https://i.stack.imgur.com/rMBag.png) **Should I contact Creality and try to",
"wobble. If I put slight pressure on the front of",
"bed. If I do that, then the print thickness on",
"print bed goes back to what it was, then the",
"filament is not coming out properly. (extruding?) I have a",
"on the upper end of the recommended temperatures at 230",
"close on the left, too far on the right: [](https://i.stack.imgur.com/pQdGD.png) And here's a picture of a few layers in",
"problem is with the print bed. I found that it",
"with warm soapy water. This is the print if I",
"by much, but there's definite give. When I print a",
"with the Ender CR6 SE, I paid that extra so",
"completely synonymous?) issue, but when I paid extra for the",
"a raft: [](https://i.stack.imgur.com/pQdGD.png) And here's a picture",
"description here](https://i.stack.imgur.com/PSSmF.png)](https://i.stack.imgur.com/PSSmF.png) **UPDATE 3** Ok, So I've found something that's",
"bed, the front goes down and the back goes up.",
"so that I wouldn't need to mess around with stuff",
"[](https://i.stack.imgur.com/rMBag.png) **Should I contact Creality and try",
"here](https://i.stack.imgur.com/PSSmF.png)](https://i.stack.imgur.com/PSSmF.png) **UPDATE 3** Ok, So I've found something that's probably",
"was new, I got loads of really good prints, however,",
"to 70 %. Here is a picture of the first",
"I push down slightly on the print bed. If I",
"[](https://i.stack.imgur.com/pQdGD.png) And here's a picture of a",
"image description here](https://i.stack.imgur.com/vN9i5.png)](https://i.stack.imgur.com/vN9i5.png) But ended up with this: [](https://i.stack.imgur.com/cdXfj.png) Not looking too good. Also - as you can",
"was, then the print regains adhesion (on that side). However,",
"then the print thickness on that part of the bed",
"return the printer and get a cheaper one that I'm",
"seems to be correct. However, if I keep that pressure",
"°C. I've also tried reducing the print speed to 70",
"nozzle will be too close to the bed on the",
"Cura Slicer for slicing. When using the hairspray method, I",
"Ender CR6 SE, I paid that extra so that I",
"image description here](https://i.stack.imgur.com/PSSmF.png)](https://i.stack.imgur.com/PSSmF.png) **UPDATE 3** Ok, So I've found something",
"got loads of really good prints, however, now they're all",
"properly. (extruding?) I have a Creality Ender CR6 SE. and",
"Not by much, but there's definite give. When I print",
"nozzle was in bad shape, so I replaced it, but",
"before any of the pictures and used Cura Slicer for",
"image description here](https://i.stack.imgur.com/cdXfj.png)](https://i.stack.imgur.com/cdXfj.png) Not looking too good. Also - as",
"temperatures and I've also tried on the upper end of",
"if I leave it like that, then the nozzle will",
"can see, I used a different filament. Using the hairspray",
"cheaper one that I'm going to have to manually level/tram",
"failing. I suspected that the nozzle was in bad shape,",
"- that print is a 3D Benchy: [![enter image description",
"When I print a big circle, the left of the",
"I paid extra for the auto-leveling with the Ender CR6"
] |
[
"PETG is better for this application. I want to print",
"table legs, would PETG be a better material to use?",
"some people used it to print parts that were used",
"and some said that PETG is better for this application.",
"want to print bases for my table legs, would PETG",
"said that PETG is better for this application. I want",
"application. I want to print bases for my table legs,",
"print parts that were used in plumbing, and they failed",
"constant load, and some said that PETG is better for",
"to print parts that were used in plumbing, and they",
"and they failed when put under constant load, and some",
"that were used in plumbing, and they failed when put",
"load, and some said that PETG is better for this",
"I thought the answer was ABS, but I read about",
"used it to print parts that were used in plumbing,",
"parts that were used in plumbing, and they failed when",
"when put under constant load, and some said that PETG",
"print bases for my table legs, would PETG be a",
"this application. I want to print bases for my table",
"bases for my table legs, would PETG be a better",
"failed when put under constant load, and some said that",
"better for this application. I want to print bases for",
"in plumbing, and they failed when put under constant load,",
"some said that PETG is better for this application. I",
"answer was ABS, but I read about how some people",
"how some people used it to print parts that were",
"people used it to print parts that were used in",
"thought the answer was ABS, but I read about how",
"for my table legs, would PETG be a better material",
"I read about how some people used it to print",
"under constant load, and some said that PETG is better",
"was ABS, but I read about how some people used",
"is better for this application. I want to print bases",
"but I read about how some people used it to",
"my table legs, would PETG be a better material to",
"used in plumbing, and they failed when put under constant",
"read about how some people used it to print parts",
"about how some people used it to print parts that",
"the answer was ABS, but I read about how some",
"put under constant load, and some said that PETG is",
"that PETG is better for this application. I want to",
"were used in plumbing, and they failed when put under",
"I want to print bases for my table legs, would",
"to print bases for my table legs, would PETG be",
"they failed when put under constant load, and some said",
"plumbing, and they failed when put under constant load, and",
"for this application. I want to print bases for my",
"it to print parts that were used in plumbing, and",
"ABS, but I read about how some people used it"
] |
[
"with the filament directly coming out of an active dryer)?",
"m x 0.8 m x 0.8 m (LxWxH). From other",
"the vehicle would be outside for 4 hours at a",
"use, but I wanted to make the frame/chassis using a",
"important that the printed part doesn't deform outside. I think",
"dimensions of the vehicle would be about 1.0 m x",
"my choices have come down to ASA, PC, and Nylon.",
"4-wheel ground robot vehicle with a payload of 25 kg",
"for 4 hours at a time. The dimensions of the",
"hold in high humidity. Has anyone had experience with Nylon",
"for outdoor use, but I wanted to make the frame/chassis",
"with Nylon in the outdoor conditions I mentioned? Was it",
"high humidity. Has anyone had experience with Nylon in the",
"large surface area Nylon part (I'm thinking of printing with",
"Nylon part (I'm thinking of printing with the filament directly",
"would be about 1.0 m x 0.8 m x 0.8",
"conditions I mentioned? Was it difficult to print a large",
"towards Nylon for tensile strength, toughness, and heat deflection, but",
"m x 0.8 m (LxWxH). From other stack exchange questions",
"and Nylon. It's important that the printed part doesn't deform",
"the humidity is 70-90%. I think the vehicle would be",
"print a large surface area Nylon part (I'm thinking of",
"thinking of printing with the filament directly coming out of",
"difficult to print a large surface area Nylon part (I'm",
"time. The dimensions of the vehicle would be about 1.0",
"printer. The outside temperature ranges between 30 °C-35 °C and",
"outside for 4 hours at a time. The dimensions of",
"30 °C-35 °C and the humidity is 70-90%. I think",
"printed part will hold in high humidity. Has anyone had",
"some reading online, my choices have come down to ASA,",
"the frame/chassis using a 3D printer. The outside temperature ranges",
"of the vehicle would be about 1.0 m x 0.8",
"deflection, but I don't know how the Nylon printed part",
"other stack exchange questions and some reading online, my choices",
"4 hours at a time. The dimensions of the vehicle",
"wanted to make the frame/chassis using a 3D printer. The",
"payload of 25 kg for outdoor use, but I wanted",
"think I'm leaning towards Nylon for tensile strength, toughness, and",
"leaning towards Nylon for tensile strength, toughness, and heat deflection,",
"Was it difficult to print a large surface area Nylon",
"°C-35 °C and the humidity is 70-90%. I think the",
"build a 4-wheel ground robot vehicle with a payload of",
"kg for outdoor use, but I wanted to make the",
"printed part doesn't deform outside. I think I'm leaning towards",
"choices have come down to ASA, PC, and Nylon. It's",
"filament directly coming out of an active dryer)? Which bed",
"at a time. The dimensions of the vehicle would be",
"The dimensions of the vehicle would be about 1.0 m",
"outside temperature ranges between 30 °C-35 °C and the humidity",
"vehicle with a payload of 25 kg for outdoor use,",
"be outside for 4 hours at a time. The dimensions",
"I'm leaning towards Nylon for tensile strength, toughness, and heat",
"I wanted to make the frame/chassis using a 3D printer.",
"the outdoor conditions I mentioned? Was it difficult to print",
"is 70-90%. I think the vehicle would be outside for",
"in high humidity. Has anyone had experience with Nylon in",
"(I'm thinking of printing with the filament directly coming out",
"online, my choices have come down to ASA, PC, and",
"3D printer. The outside temperature ranges between 30 °C-35 °C",
"outdoor conditions I mentioned? Was it difficult to print a",
"Which bed surface were you using? Would you recommend any",
"directly coming out of an active dryer)? Which bed surface",
"to build a 4-wheel ground robot vehicle with a payload",
"stack exchange questions and some reading online, my choices have",
"to print a large surface area Nylon part (I'm thinking",
"ranges between 30 °C-35 °C and the humidity is 70-90%.",
"Nylon printed part will hold in high humidity. Has anyone",
"outside. I think I'm leaning towards Nylon for tensile strength,",
"anyone had experience with Nylon in the outdoor conditions I",
"Has anyone had experience with Nylon in the outdoor conditions",
"that the printed part doesn't deform outside. I think I'm",
"a 3D printer. The outside temperature ranges between 30 °C-35",
"have come down to ASA, PC, and Nylon. It's important",
"with a payload of 25 kg for outdoor use, but",
"temperature ranges between 30 °C-35 °C and the humidity is",
"robot vehicle with a payload of 25 kg for outdoor",
"active dryer)? Which bed surface were you using? Would you",
"dryer)? Which bed surface were you using? Would you recommend",
"about 1.0 m x 0.8 m x 0.8 m (LxWxH).",
"exchange questions and some reading online, my choices have come",
"From other stack exchange questions and some reading online, my",
"the Nylon printed part will hold in high humidity. Has",
"25 kg for outdoor use, but I wanted to make",
"I mentioned? Was it difficult to print a large surface",
"and some reading online, my choices have come down to",
"down to ASA, PC, and Nylon. It's important that the",
"between 30 °C-35 °C and the humidity is 70-90%. I",
"to ASA, PC, and Nylon. It's important that the printed",
"and heat deflection, but I don't know how the Nylon",
"of an active dryer)? Which bed surface were you using?",
"will hold in high humidity. Has anyone had experience with",
"ASA, PC, and Nylon. It's important that the printed part",
"vehicle would be outside for 4 hours at a time.",
"make the frame/chassis using a 3D printer. The outside temperature",
"of 25 kg for outdoor use, but I wanted to",
"a 4-wheel ground robot vehicle with a payload of 25",
"part (I'm thinking of printing with the filament directly coming",
"hours at a time. The dimensions of the vehicle would",
"Nylon. It's important that the printed part doesn't deform outside.",
"it difficult to print a large surface area Nylon part",
"deform outside. I think I'm leaning towards Nylon for tensile",
"be about 1.0 m x 0.8 m x 0.8 m",
"come down to ASA, PC, and Nylon. It's important that",
"the vehicle would be about 1.0 m x 0.8 m",
"would be outside for 4 hours at a time. The",
"0.8 m x 0.8 m (LxWxH). From other stack exchange",
"PC, and Nylon. It's important that the printed part doesn't",
"x 0.8 m x 0.8 m (LxWxH). From other stack",
"strength, toughness, and heat deflection, but I don't know how",
"but I don't know how the Nylon printed part will",
"coming out of an active dryer)? Which bed surface were",
"70-90%. I think the vehicle would be outside for 4",
"ground robot vehicle with a payload of 25 kg for",
"surface were you using? Would you recommend any other filaments?",
"°C and the humidity is 70-90%. I think the vehicle",
"know how the Nylon printed part will hold in high",
"wanted to build a 4-wheel ground robot vehicle with a",
"part will hold in high humidity. Has anyone had experience",
"bed surface were you using? Would you recommend any other",
"using a 3D printer. The outside temperature ranges between 30",
"a time. The dimensions of the vehicle would be about",
"humidity. Has anyone had experience with Nylon in the outdoor",
"of printing with the filament directly coming out of an",
"a payload of 25 kg for outdoor use, but I",
"I don't know how the Nylon printed part will hold",
"Nylon in the outdoor conditions I mentioned? Was it difficult",
"I think the vehicle would be outside for 4 hours",
"m (LxWxH). From other stack exchange questions and some reading",
"toughness, and heat deflection, but I don't know how the",
"1.0 m x 0.8 m x 0.8 m (LxWxH). From",
"and the humidity is 70-90%. I think the vehicle would",
"how the Nylon printed part will hold in high humidity.",
"don't know how the Nylon printed part will hold in",
"frame/chassis using a 3D printer. The outside temperature ranges between",
"think the vehicle would be outside for 4 hours at",
"the filament directly coming out of an active dryer)? Which",
"out of an active dryer)? Which bed surface were you",
"but I wanted to make the frame/chassis using a 3D",
"part doesn't deform outside. I think I'm leaning towards Nylon",
"(LxWxH). From other stack exchange questions and some reading online,",
"in the outdoor conditions I mentioned? Was it difficult to",
"reading online, my choices have come down to ASA, PC,",
"an active dryer)? Which bed surface were you using? Would",
"to make the frame/chassis using a 3D printer. The outside",
"x 0.8 m (LxWxH). From other stack exchange questions and",
"It's important that the printed part doesn't deform outside. I",
"tensile strength, toughness, and heat deflection, but I don't know",
"area Nylon part (I'm thinking of printing with the filament",
"a large surface area Nylon part (I'm thinking of printing",
"questions and some reading online, my choices have come down",
"outdoor use, but I wanted to make the frame/chassis using",
"heat deflection, but I don't know how the Nylon printed",
"printing with the filament directly coming out of an active",
"had experience with Nylon in the outdoor conditions I mentioned?",
"surface area Nylon part (I'm thinking of printing with the",
"for tensile strength, toughness, and heat deflection, but I don't",
"doesn't deform outside. I think I'm leaning towards Nylon for",
"Nylon for tensile strength, toughness, and heat deflection, but I",
"I think I'm leaning towards Nylon for tensile strength, toughness,",
"the printed part doesn't deform outside. I think I'm leaning",
"0.8 m (LxWxH). From other stack exchange questions and some",
"vehicle would be about 1.0 m x 0.8 m x",
"The outside temperature ranges between 30 °C-35 °C and the",
"humidity is 70-90%. I think the vehicle would be outside",
"mentioned? Was it difficult to print a large surface area",
"experience with Nylon in the outdoor conditions I mentioned? Was",
"I wanted to build a 4-wheel ground robot vehicle with"
] |
[
"Pro (this is similar to an Ender 3 S1) *",
"6hr session in a filament dryer * 235 °C nozzle",
"And some stringing on the bow, near the front deck.",
"* 70 °C bed * retraction 3.0 mm * print",
"or 5 for retraction and/or faster retraction speeds? I figure",
"printed Benchy with minor stringing problems\") Here are my settings.",
"to not go below 235 °C for PETG so that",
"had a 6hr session in a filament dryer * 235",
"to an Ender 3 S1) * direct drive extruder *",
"board * CR Touch * Marlin 2.0 * hot end",
"in the dark. I was told to not go below",
"a printed benchy with minor stringing problems](https://i.stack.imgur.com/EimB6.jpg \"Photo of the",
"3 Pro with an MK8 * PEI sheet * K",
"came out perfect. Is there any way to improve my",
"30 mm/s and it came out perfect. Is there any",
"an MK8 * PEI sheet * K value 2.0 -",
"and/or faster retraction speeds? I figure I ask before taking",
"I ask before taking shots in the dark. I was",
"Inland PETG - Yellow): * a few days ago it",
"few days ago it had a 6hr session in a",
"about a month ago. Settings (using Inland PETG - Yellow):",
"question. Any ideas? Below are my settings. The printer is",
"is a Sovol Sv01 Pro (this is similar to an",
"some boogers on the chimney [![Photo of a printed benchy",
"top of a printed Benchy with minor stringing problems\")](https://i.stack.imgur.com/EimB6.jpg \"Photo",
"go below 235 °C for PETG so that seems like",
"and it came out perfect. Is there any way to",
"of a printed Benchy with zits on the chimney\") And",
"of the top of a printed benchy with minor stringing",
"\"Photo of a printed Benchy with zits on the chimney\")](https://i.stack.imgur.com/fV2oD.jpg",
"* Creality silent board * CR Touch * Marlin 2.0",
"a printed Benchy with minor stringing problems\")](https://i.stack.imgur.com/EimB6.jpg \"Photo of the",
"Here are my settings. On another roll of Inland PETG,",
"235 °C for PETG so that seems like lowering the",
"of Inland PETG, I printed a Benchy at 30 mm/s",
"235 °C nozzle * 70 °C bed * retraction 3.0",
"2.0 - this was the factory setting All the parts",
"settings. On another roll of Inland PETG, I printed a",
"printed benchy with zits on the chimney](https://i.stack.imgur.com/fV2oD.jpg \"Photo of a",
"\"Photo of a printed Benchy with zits on the chimney\")",
"the question. Any ideas? Below are my settings. The printer",
"Settings (using Inland PETG - Yellow): * a few days",
"a 6hr session in a filament dryer * 235 °C",
"3.0 mm * print speed 40 mm/s * print acceleration",
"my settings. The printer is a Sovol Sv01 Pro (this",
"the factory setting All the parts are pretty new since",
"printed benchy with minor stringing problems](https://i.stack.imgur.com/EimB6.jpg \"Photo of the top",
"most part except for some boogers on the chimney [![Photo",
"boogers on the chimney [![Photo of a printed benchy with",
"out of the question. Any ideas? Below are my settings.",
"printer is a Sovol Sv01 Pro (this is similar to",
"settings. The printer is a Sovol Sv01 Pro (this is",
"setting All the parts are pretty new since I bought",
"on an Amazon Prime day about a month ago. Settings",
"[![Photo of a printed benchy with zits on the chimney](https://i.stack.imgur.com/fV2oD.jpg",
"zits on the chimney\")](https://i.stack.imgur.com/fV2oD.jpg \"Photo of a printed Benchy with",
"deck. [![Photo of the top of a printed benchy with",
"the top of a printed Benchy with minor stringing problems\")](https://i.stack.imgur.com/EimB6.jpg",
"extruder * Creality silent board * CR Touch * Marlin",
"are my settings. On another roll of Inland PETG, I",
"filament dryer * 235 °C nozzle * 70 °C bed",
"minor stringing problems\") Here are my settings. On another roll",
"is out of the question. Any ideas? Below are my",
"- this was the factory setting All the parts are",
"minor stringing problems](https://i.stack.imgur.com/EimB6.jpg \"Photo of the top of a printed",
"good for the most part except for some boogers on",
"new since I bought the printer on an Amazon Prime",
"perfect. Is there any way to improve my results at",
"a month ago. Settings (using Inland PETG - Yellow): *",
"Benchy with zits on the chimney\")](https://i.stack.imgur.com/fV2oD.jpg \"Photo of a printed",
"a filament dryer * 235 °C nozzle * 70 °C",
"higher speeds? Maybe 4 or 5 for retraction and/or faster",
"chimney\")](https://i.stack.imgur.com/fV2oD.jpg \"Photo of a printed Benchy with zits on the",
"factory setting All the parts are pretty new since I",
"improve my results at higher speeds? Maybe 4 or 5",
"day about a month ago. Settings (using Inland PETG -",
"PETG - Yellow): * a few days ago it had",
"it came out perfect. Is there any way to improve",
"[![Photo of the top of a printed benchy with minor",
"are pretty new since I bought the printer on an",
"bed * retraction 3.0 mm * print speed 40 mm/s",
"my settings. On another roll of Inland PETG, I printed",
"benchy with minor stringing problems](https://i.stack.imgur.com/EimB6.jpg \"Photo of the top of",
"speeds? I figure I ask before taking shots in the",
"* 235 °C nozzle * 70 °C bed * retraction",
"2.0 * hot end like and Ender 3 Pro with",
"I printed a Benchy at 30 mm/s and it came",
"printed Benchy with zits on the chimney\") And some stringing",
"Benchy with minor stringing problems\") Here are my settings. On",
"with minor stringing problems](https://i.stack.imgur.com/EimB6.jpg \"Photo of the top of a",
"PETG so that seems like lowering the temperature is out",
"was told to not go below 235 °C for PETG",
"the front deck. [![Photo of the top of a printed",
"drive extruder * Creality silent board * CR Touch *",
"the parts are pretty new since I bought the printer",
"(using Inland PETG - Yellow): * a few days ago",
"°C bed * retraction 3.0 mm * print speed 40",
"Benchy with zits on the chimney\") And some stringing on",
"the chimney [![Photo of a printed benchy with zits on",
"nozzle * 70 °C bed * retraction 3.0 mm *",
"before taking shots in the dark. I was told to",
"some stringing on the bow, near the front deck. [![Photo",
"problems\")](https://i.stack.imgur.com/EimB6.jpg \"Photo of the top of a printed Benchy with",
"Any ideas? Below are my settings. The printer is a",
"* PEI sheet * K value 2.0 - this was",
"was the factory setting All the parts are pretty new",
"front deck. [![Photo of the top of a printed benchy",
"Amazon Prime day about a month ago. Settings (using Inland",
"The Benchy looks good for the most part except for",
"(this is similar to an Ender 3 S1) * direct",
"printed Benchy with zits on the chimney\")](https://i.stack.imgur.com/fV2oD.jpg \"Photo of a",
"so that seems like lowering the temperature is out of",
"* direct drive extruder * Creality silent board * CR",
"any way to improve my results at higher speeds? Maybe",
"parts are pretty new since I bought the printer on",
"days ago it had a 6hr session in a filament",
"with an MK8 * PEI sheet * K value 2.0",
"part except for some boogers on the chimney [![Photo of",
"All the parts are pretty new since I bought the",
"of a printed Benchy with minor stringing problems\")](https://i.stack.imgur.com/EimB6.jpg \"Photo of",
"printed a Benchy at 30 mm/s and it came out",
"lowering the temperature is out of the question. Any ideas?",
"retraction and/or faster retraction speeds? I figure I ask before",
"the dark. I was told to not go below 235",
"in a filament dryer * 235 °C nozzle * 70",
"°C for PETG so that seems like lowering the temperature",
"On another roll of Inland PETG, I printed a Benchy",
"for retraction and/or faster retraction speeds? I figure I ask",
"bow, near the front deck. [![Photo of the top of",
"the chimney\") And some stringing on the bow, near the",
"Sovol Sv01 Pro (this is similar to an Ender 3",
"a Sovol Sv01 Pro (this is similar to an Ender",
"stringing problems](https://i.stack.imgur.com/EimB6.jpg \"Photo of the top of a printed Benchy",
"chimney [![Photo of a printed benchy with zits on the",
"hot end like and Ender 3 Pro with an MK8",
"of a printed Benchy with minor stringing problems\") Here are",
"mm * print speed 40 mm/s * print acceleration 500",
"a printed Benchy with zits on the chimney\") And some",
"stringing problems\")](https://i.stack.imgur.com/EimB6.jpg \"Photo of the top of a printed Benchy",
"Yellow): * a few days ago it had a 6hr",
"\"Photo of the top of a printed Benchy with minor",
"to improve my results at higher speeds? Maybe 4 or",
"it had a 6hr session in a filament dryer *",
"speeds? Maybe 4 or 5 for retraction and/or faster retraction",
"of the question. Any ideas? Below are my settings. The",
"stringing on the bow, near the front deck. [![Photo of",
"MK8 * PEI sheet * K value 2.0 - this",
"temperature is out of the question. Any ideas? Below are",
"a few days ago it had a 6hr session in",
"I bought the printer on an Amazon Prime day about",
"with minor stringing problems\") Here are my settings. On another",
"on the chimney [![Photo of a printed benchy with zits",
"retraction speeds? I figure I ask before taking shots in",
"of the top of a printed Benchy with minor stringing",
"The printer is a Sovol Sv01 Pro (this is similar",
"sheet * K value 2.0 - this was the factory",
"Prime day about a month ago. Settings (using Inland PETG",
"speed 40 mm/s * print acceleration 500 mm/s * jerk",
"the top of a printed benchy with minor stringing problems](https://i.stack.imgur.com/EimB6.jpg",
"looks good for the most part except for some boogers",
"Inland PETG, I printed a Benchy at 30 mm/s and",
"- Yellow): * a few days ago it had a",
"retraction 3.0 mm * print speed 40 mm/s * print",
"problems\") Here are my settings. On another roll of Inland",
"ago. Settings (using Inland PETG - Yellow): * a few",
"Ender 3 Pro with an MK8 * PEI sheet *",
"this was the factory setting All the parts are pretty",
"top of a printed benchy with minor stringing problems](https://i.stack.imgur.com/EimB6.jpg \"Photo",
"printed Benchy with minor stringing problems\")](https://i.stack.imgur.com/EimB6.jpg \"Photo of the top",
"the top of a printed Benchy with minor stringing problems\")",
"and Ender 3 Pro with an MK8 * PEI sheet",
"told to not go below 235 °C for PETG so",
"except for some boogers on the chimney [![Photo of a",
"not go below 235 °C for PETG so that seems",
"my results at higher speeds? Maybe 4 or 5 for",
"Touch * Marlin 2.0 * hot end like and Ender",
"* a few days ago it had a 6hr session",
"direct drive extruder * Creality silent board * CR Touch",
"zits on the chimney\") And some stringing on the bow,",
"print speed 40 mm/s * print acceleration 500 mm/s *",
"minor stringing problems\")](https://i.stack.imgur.com/EimB6.jpg \"Photo of the top of a printed",
"zits on the chimney](https://i.stack.imgur.com/fV2oD.jpg \"Photo of a printed Benchy with",
"that seems like lowering the temperature is out of the",
"month ago. Settings (using Inland PETG - Yellow): * a",
"shots in the dark. I was told to not go",
"there any way to improve my results at higher speeds?",
"out perfect. Is there any way to improve my results",
"S1) * direct drive extruder * Creality silent board *",
"I was told to not go below 235 °C for",
"Benchy with minor stringing problems\")](https://i.stack.imgur.com/EimB6.jpg \"Photo of the top of",
"top of a printed Benchy with minor stringing problems\") Here",
"Is there any way to improve my results at higher",
"mm/s and it came out perfect. Is there any way",
"with minor stringing problems\")](https://i.stack.imgur.com/EimB6.jpg \"Photo of the top of a",
"mm/s * print acceleration 500 mm/s * jerk 12 mm/s",
"the chimney\")](https://i.stack.imgur.com/fV2oD.jpg \"Photo of a printed Benchy with zits on",
"are my settings. The printer is a Sovol Sv01 Pro",
"since I bought the printer on an Amazon Prime day",
"Ender 3 S1) * direct drive extruder * Creality silent",
"with zits on the chimney](https://i.stack.imgur.com/fV2oD.jpg \"Photo of a printed Benchy",
"silent board * CR Touch * Marlin 2.0 * hot",
"results at higher speeds? Maybe 4 or 5 for retraction",
"chimney](https://i.stack.imgur.com/fV2oD.jpg \"Photo of a printed Benchy with zits on the",
"a printed benchy with zits on the chimney](https://i.stack.imgur.com/fV2oD.jpg \"Photo of",
"a printed Benchy with zits on the chimney\")](https://i.stack.imgur.com/fV2oD.jpg \"Photo of",
"for some boogers on the chimney [![Photo of a printed",
"below 235 °C for PETG so that seems like lowering",
"°C nozzle * 70 °C bed * retraction 3.0 mm",
"another roll of Inland PETG, I printed a Benchy at",
"similar to an Ender 3 S1) * direct drive extruder",
"Benchy looks good for the most part except for some",
"* hot end like and Ender 3 Pro with an",
"bought the printer on an Amazon Prime day about a",
"value 2.0 - this was the factory setting All the",
"seems like lowering the temperature is out of the question.",
"like lowering the temperature is out of the question. Any",
"roll of Inland PETG, I printed a Benchy at 30",
"session in a filament dryer * 235 °C nozzle *",
"5 for retraction and/or faster retraction speeds? I figure I",
"at 30 mm/s and it came out perfect. Is there",
"* Marlin 2.0 * hot end like and Ender 3",
"PEI sheet * K value 2.0 - this was the",
"an Ender 3 S1) * direct drive extruder * Creality",
"on the chimney](https://i.stack.imgur.com/fV2oD.jpg \"Photo of a printed Benchy with zits",
"of a printed benchy with minor stringing problems](https://i.stack.imgur.com/EimB6.jpg \"Photo of",
"at higher speeds? Maybe 4 or 5 for retraction and/or",
"with zits on the chimney\")](https://i.stack.imgur.com/fV2oD.jpg \"Photo of a printed Benchy",
"an Amazon Prime day about a month ago. Settings (using",
"a Benchy at 30 mm/s and it came out perfect.",
"4 or 5 for retraction and/or faster retraction speeds? I",
"chimney\") And some stringing on the bow, near the front",
"* retraction 3.0 mm * print speed 40 mm/s *",
"* print speed 40 mm/s * print acceleration 500 mm/s",
"the temperature is out of the question. Any ideas? Below",
"on the chimney\") And some stringing on the bow, near",
"PETG, I printed a Benchy at 30 mm/s and it",
"Sv01 Pro (this is similar to an Ender 3 S1)",
"near the front deck. [![Photo of the top of a",
"Below are my settings. The printer is a Sovol Sv01",
"the bow, near the front deck. [![Photo of the top",
"faster retraction speeds? I figure I ask before taking shots",
"* K value 2.0 - this was the factory setting",
"70 °C bed * retraction 3.0 mm * print speed",
"benchy with zits on the chimney](https://i.stack.imgur.com/fV2oD.jpg \"Photo of a printed",
"Marlin 2.0 * hot end like and Ender 3 Pro",
"for the most part except for some boogers on the",
"the chimney](https://i.stack.imgur.com/fV2oD.jpg \"Photo of a printed Benchy with zits on",
"a printed Benchy with minor stringing problems\") Here are my",
"taking shots in the dark. I was told to not",
"* CR Touch * Marlin 2.0 * hot end like",
"on the bow, near the front deck. [![Photo of the",
"K value 2.0 - this was the factory setting All",
"printer on an Amazon Prime day about a month ago.",
"stringing problems\") Here are my settings. On another roll of",
"ago it had a 6hr session in a filament dryer",
"ask before taking shots in the dark. I was told",
"CR Touch * Marlin 2.0 * hot end like and",
"Maybe 4 or 5 for retraction and/or faster retraction speeds?",
"way to improve my results at higher speeds? Maybe 4",
"on the chimney\")](https://i.stack.imgur.com/fV2oD.jpg \"Photo of a printed Benchy with zits",
"3 S1) * direct drive extruder * Creality silent board",
"Creality silent board * CR Touch * Marlin 2.0 *",
"I figure I ask before taking shots in the dark.",
"of a printed benchy with zits on the chimney](https://i.stack.imgur.com/fV2oD.jpg \"Photo",
"ideas? Below are my settings. The printer is a Sovol",
"end like and Ender 3 Pro with an MK8 *",
"for PETG so that seems like lowering the temperature is",
"is similar to an Ender 3 S1) * direct drive",
"dryer * 235 °C nozzle * 70 °C bed *",
"40 mm/s * print acceleration 500 mm/s * jerk 12",
"the most part except for some boogers on the chimney",
"figure I ask before taking shots in the dark. I",
"pretty new since I bought the printer on an Amazon",
"of a printed Benchy with zits on the chimney\")](https://i.stack.imgur.com/fV2oD.jpg \"Photo",
"like and Ender 3 Pro with an MK8 * PEI",
"dark. I was told to not go below 235 °C",
"with zits on the chimney\") And some stringing on the",
"Benchy at 30 mm/s and it came out perfect. Is",
"Pro with an MK8 * PEI sheet * K value",
"the printer on an Amazon Prime day about a month",
"problems](https://i.stack.imgur.com/EimB6.jpg \"Photo of the top of a printed Benchy with"
] |
[
"with the hole facing down. The support leaves a rough",
"settings fix, or at least maybe someone has a couple",
"couple suggestions I can try. I'm using an Ender 3,",
"try. I'm using an Ender 3, and the program Cura.",
"right with the hole facing down. The support leaves a",
"fix, or at least maybe someone has a couple suggestions",
"on the left was printed with the opening facing up.",
"might be an easy settings fix, or at least maybe",
"at least maybe someone has a couple suggestions I can",
"an easy settings fix, or at least maybe someone has",
"easy settings fix, or at least maybe someone has a",
"show my issue. I'm hoping might be an easy settings",
"suggestions I can try. I'm using an Ender 3, and",
"the program Cura. The print on the left was printed",
"facing up. The print on the right with the hole",
"up. The print on the right with the hole facing",
"can try. I'm using an Ender 3, and the program",
"rough surface. Any suggestions for support settings would be appreciated.",
"opening facing up. The print on the right with the",
"surface. Any suggestions for support settings would be appreciated. [](https://i.stack.imgur.com/AnkLP.jpg)",
"least maybe someone has a couple suggestions I can try.",
"Cura. The print on the left was printed with the",
"issue. I'm hoping might be an easy settings fix, or",
"Ender 3, and the program Cura. The print on the",
"facing down. The support leaves a rough surface. Any suggestions",
"and the program Cura. The print on the left was",
"an Ender 3, and the program Cura. The print on"
] |
[
"of white powder between the layers, is this normal for",
"It's not even airtight at 2.5 bar: [![Photo of pressure",
"resistant under water producing bubbles; not airtight](https://i.stack.imgur.com/rt0B8.jpg \"Photo of pressure",
"pressure resistant](https://i.stack.imgur.com/IQyNO.png \"Screenshot of a model for a pressure resistant\")](https://i.stack.imgur.com/IQyNO.png",
"to show internal structure\") Do you have any ideas/suggestions to",
"Here are the parameters that I have changed in Cura:",
"bubbles; not airtight\") And here is a mid-cut of the",
"for a pressure resistant\") Here are the parameters that I",
"bubbles; not airtight](https://i.stack.imgur.com/rt0B8.jpg \"Photo of pressure resistant under water producing",
"best parameters to make my prints airtight (by airtight I",
"any ideas/suggestions to have better results? Can it be from",
"of pressure resistant under water producing bubbles; not airtight\") And",
"bar). Here is the test model that I have made",
"these changes in Cura don't give good results for ABS.",
"in two to show internal structure](https://i.stack.imgur.com/EkNP6.jpg \"Photo of pressure resistant",
"pressure resistant cut in two to show internal structure](https://i.stack.imgur.com/EkNP6.jpg \"Photo",
"ABS? Should I try using PETG? What could I change",
"of pressure resistant cut in two to show internal structure\")",
": 100 % * print temp: 250 °C (high temp",
"is a sort of white powder between the layers, is",
"in two to show internal structure\")](https://i.stack.imgur.com/EkNP6.jpg \"Photo of pressure resistant",
"40 % * flow: 115 % But all these changes",
"Cura: * layer height: 0.1 mm * infill : 100",
"parameters that I have changed in Cura: * layer height:",
"model for a pressure resistant](https://i.stack.imgur.com/IQyNO.png \"Screenshot of a model for",
"airtight\") And here is a mid-cut of the print :",
"parameters to make my prints airtight (by airtight I mean,",
"of pressure resistant cut in two to show internal structure\")](https://i.stack.imgur.com/EkNP6.jpg",
"2.5 bar: [![Photo of pressure resistant under water producing bubbles;",
"I mean, it needs to resist to 10 bar). Here",
"this normal for ABS? Should I try using PETG? What",
"from the ABS itself? There is a sort of white",
"layers stick between them) * wall line count: 5 *",
"my prints airtight (by airtight I mean, it needs to",
"don't give good results for ABS. It's not even airtight",
"infill : 100 % * print temp: 250 °C (high",
"airtight I mean, it needs to resist to 10 bar).",
"to make some prints of pressure resistants. I am currently",
"for a pressure resistant\")](https://i.stack.imgur.com/IQyNO.png \"Screenshot of a model for a",
"test model that I have made for this: [![Screenshot of",
"wall line count: 5 * infill overlap: 40 % *",
"Can it be from the ABS itself? There is a",
"pressure resistants. I am currently trying to print a simple",
"a model for a pressure resistant](https://i.stack.imgur.com/IQyNO.png \"Screenshot of a model",
"of pressure resistant under water producing bubbles; not airtight](https://i.stack.imgur.com/rt0B8.jpg \"Photo",
"producing bubbles; not airtight\")](https://i.stack.imgur.com/rt0B8.jpg \"Photo of pressure resistant under water",
"to show internal structure](https://i.stack.imgur.com/EkNP6.jpg \"Photo of pressure resistant cut in",
"ABS itself? There is a sort of white powder between",
"the best parameters to make my prints airtight (by airtight",
"to make the layers stick between them) * wall line",
"I have changed in Cura: * layer height: 0.1 mm",
"(by airtight I mean, it needs to resist to 10",
"[![Photo of pressure resistant under water producing bubbles; not airtight](https://i.stack.imgur.com/rt0B8.jpg",
"resist to 10 bar). Here is the test model that",
"pressure resistant under water producing bubbles; not airtight\") And here",
"I want to make some prints of pressure resistants. I",
"all these changes in Cura don't give good results for",
"water producing bubbles; not airtight\") And here is a mid-cut",
"not airtight\") And here is a mid-cut of the print",
"resistant\") Here are the parameters that I have changed in",
"make the layers stick between them) * wall line count:",
"structure\")](https://i.stack.imgur.com/EkNP6.jpg \"Photo of pressure resistant cut in two to show",
"100 % * print temp: 250 °C (high temp to",
"under water producing bubbles; not airtight](https://i.stack.imgur.com/rt0B8.jpg \"Photo of pressure resistant",
"bar: [![Photo of pressure resistant under water producing bubbles; not",
"bubbles; not airtight\")](https://i.stack.imgur.com/rt0B8.jpg \"Photo of pressure resistant under water producing",
"results? Can it be from the ABS itself? There is",
"them) * wall line count: 5 * infill overlap: 40",
"not even airtight at 2.5 bar: [![Photo of pressure resistant",
"model that I have made for this: [![Screenshot of a",
"model for a pressure resistant\") Here are the parameters that",
"normal for ABS? Should I try using PETG? What could",
": [![Photo of pressure resistant cut in two to show",
"to resist to 10 bar). Here is the test model",
"* print temp: 250 °C (high temp to make the",
"have made for this: [![Screenshot of a model for a",
"under water producing bubbles; not airtight\")](https://i.stack.imgur.com/rt0B8.jpg \"Photo of pressure resistant",
"of pressure resistant cut in two to show internal structure](https://i.stack.imgur.com/EkNP6.jpg",
"infill overlap: 40 % * flow: 115 % But all",
"pressure resistant\") Here are the parameters that I have changed",
"* flow: 115 % But all these changes in Cura",
"that I have changed in Cura: * layer height: 0.1",
"results for ABS. It's not even airtight at 2.5 bar:",
"[![Screenshot of a model for a pressure resistant](https://i.stack.imgur.com/IQyNO.png \"Screenshot of",
"cut in two to show internal structure\") Do you have",
"* infill overlap: 40 % * flow: 115 % But",
"this: [![Screenshot of a model for a pressure resistant](https://i.stack.imgur.com/IQyNO.png \"Screenshot",
"a model for a pressure resistant\")](https://i.stack.imgur.com/IQyNO.png \"Screenshot of a model",
"between them) * wall line count: 5 * infill overlap:",
"mean, it needs to resist to 10 bar). Here is",
"pressure resistant cut in two to show internal structure\")](https://i.stack.imgur.com/EkNP6.jpg \"Photo",
"between the layers, is this normal for ABS? Should I",
"to find the best parameters to make my prints airtight",
"trying to print a simple cylinder to find the best",
"And here is a mid-cut of the print : [![Photo",
"in two to show internal structure\") Do you have any",
"for a pressure resistant](https://i.stack.imgur.com/IQyNO.png \"Screenshot of a model for a",
"a pressure resistant](https://i.stack.imgur.com/IQyNO.png \"Screenshot of a model for a pressure",
"needs to resist to 10 bar). Here is the test",
"resistants. I am currently trying to print a simple cylinder",
"* infill : 100 % * print temp: 250 °C",
"mid-cut of the print : [![Photo of pressure resistant cut",
"of the print : [![Photo of pressure resistant cut in",
"for ABS. It's not even airtight at 2.5 bar: [![Photo",
"show internal structure\") Do you have any ideas/suggestions to have",
"°C (high temp to make the layers stick between them)",
"in Cura don't give good results for ABS. It's not",
"under water producing bubbles; not airtight\") And here is a",
"producing bubbles; not airtight](https://i.stack.imgur.com/rt0B8.jpg \"Photo of pressure resistant under water",
"in Cura: * layer height: 0.1 mm * infill :",
"resistant under water producing bubbles; not airtight\")](https://i.stack.imgur.com/rt0B8.jpg \"Photo of pressure",
"is this normal for ABS? Should I try using PETG?",
"prints of pressure resistants. I am currently trying to print",
"am currently trying to print a simple cylinder to find",
"of a model for a pressure resistant](https://i.stack.imgur.com/IQyNO.png \"Screenshot of a",
"count: 5 * infill overlap: 40 % * flow: 115",
"line count: 5 * infill overlap: 40 % * flow:",
"mm * infill : 100 % * print temp: 250",
"But all these changes in Cura don't give good results",
"currently trying to print a simple cylinder to find the",
"two to show internal structure\") Do you have any ideas/suggestions",
"resistant](https://i.stack.imgur.com/IQyNO.png \"Screenshot of a model for a pressure resistant\")](https://i.stack.imgur.com/IQyNO.png \"Screenshot",
"sort of white powder between the layers, is this normal",
"of pressure resistant under water producing bubbles; not airtight\")](https://i.stack.imgur.com/rt0B8.jpg \"Photo",
"I have made for this: [![Screenshot of a model for",
"the parameters that I have changed in Cura: * layer",
"it needs to resist to 10 bar). Here is the",
"cylinder to find the best parameters to make my prints",
"changes in Cura don't give good results for ABS. It's",
"water producing bubbles; not airtight](https://i.stack.imgur.com/rt0B8.jpg \"Photo of pressure resistant under",
"at 2.5 bar: [![Photo of pressure resistant under water producing",
"airtight\")](https://i.stack.imgur.com/rt0B8.jpg \"Photo of pressure resistant under water producing bubbles; not",
"cut in two to show internal structure\")](https://i.stack.imgur.com/EkNP6.jpg \"Photo of pressure",
"the ABS itself? There is a sort of white powder",
"model for a pressure resistant\")](https://i.stack.imgur.com/IQyNO.png \"Screenshot of a model for",
"a mid-cut of the print : [![Photo of pressure resistant",
"two to show internal structure](https://i.stack.imgur.com/EkNP6.jpg \"Photo of pressure resistant cut",
"(high temp to make the layers stick between them) *",
"to 10 bar). Here is the test model that I",
"a simple cylinder to find the best parameters to make",
"0.1 mm * infill : 100 % * print temp:",
"not airtight](https://i.stack.imgur.com/rt0B8.jpg \"Photo of pressure resistant under water producing bubbles;",
"[![Photo of pressure resistant cut in two to show internal",
"that I have made for this: [![Screenshot of a model",
"115 % But all these changes in Cura don't give",
"\"Screenshot of a model for a pressure resistant\")](https://i.stack.imgur.com/IQyNO.png \"Screenshot of",
"even airtight at 2.5 bar: [![Photo of pressure resistant under",
"here is a mid-cut of the print : [![Photo of",
"pressure resistant cut in two to show internal structure\") Do",
"changed in Cura: * layer height: 0.1 mm * infill",
"try using PETG? What could I change in my parameters?",
"* layer height: 0.1 mm * infill : 100 %",
"internal structure\")](https://i.stack.imgur.com/EkNP6.jpg \"Photo of pressure resistant cut in two to",
"There is a sort of white powder between the layers,",
"airtight at 2.5 bar: [![Photo of pressure resistant under water",
"to show internal structure\")](https://i.stack.imgur.com/EkNP6.jpg \"Photo of pressure resistant cut in",
"white powder between the layers, is this normal for ABS?",
"prints airtight (by airtight I mean, it needs to resist",
"pressure resistant\")](https://i.stack.imgur.com/IQyNO.png \"Screenshot of a model for a pressure resistant\")",
"producing bubbles; not airtight\") And here is a mid-cut of",
"resistant\")](https://i.stack.imgur.com/IQyNO.png \"Screenshot of a model for a pressure resistant\") Here",
"% But all these changes in Cura don't give good",
"pressure resistant under water producing bubbles; not airtight](https://i.stack.imgur.com/rt0B8.jpg \"Photo of",
"the test model that I have made for this: [![Screenshot",
"10 bar). Here is the test model that I have",
"make my prints airtight (by airtight I mean, it needs",
"a pressure resistant\")](https://i.stack.imgur.com/IQyNO.png \"Screenshot of a model for a pressure",
"of a model for a pressure resistant\") Here are the",
"height: 0.1 mm * infill : 100 % * print",
"give good results for ABS. It's not even airtight at",
"show internal structure](https://i.stack.imgur.com/EkNP6.jpg \"Photo of pressure resistant cut in two",
"it be from the ABS itself? There is a sort",
"I am currently trying to print a simple cylinder to",
"5 * infill overlap: 40 % * flow: 115 %",
"show internal structure\")](https://i.stack.imgur.com/EkNP6.jpg \"Photo of pressure resistant cut in two",
"ideas/suggestions to have better results? Can it be from the",
"to have better results? Can it be from the ABS",
"a sort of white powder between the layers, is this",
"be from the ABS itself? There is a sort of",
"structure](https://i.stack.imgur.com/EkNP6.jpg \"Photo of pressure resistant cut in two to show",
"itself? There is a sort of white powder between the",
"some prints of pressure resistants. I am currently trying to",
"print a simple cylinder to find the best parameters to",
"Cura don't give good results for ABS. It's not even",
"pressure resistant under water producing bubbles; not airtight\")](https://i.stack.imgur.com/rt0B8.jpg \"Photo of",
"is a mid-cut of the print : [![Photo of pressure",
"flow: 115 % But all these changes in Cura don't",
"% * print temp: 250 °C (high temp to make",
"* wall line count: 5 * infill overlap: 40 %",
"is the test model that I have made for this:",
"resistant cut in two to show internal structure](https://i.stack.imgur.com/EkNP6.jpg \"Photo of",
"layers, is this normal for ABS? Should I try using",
"internal structure](https://i.stack.imgur.com/EkNP6.jpg \"Photo of pressure resistant cut in two to",
"have better results? Can it be from the ABS itself?",
"250 °C (high temp to make the layers stick between",
"airtight (by airtight I mean, it needs to resist to",
"structure\") Do you have any ideas/suggestions to have better results?",
"for ABS? Should I try using PETG? What could I",
"Here is the test model that I have made for",
"find the best parameters to make my prints airtight (by",
"resistant cut in two to show internal structure\")](https://i.stack.imgur.com/EkNP6.jpg \"Photo of",
"temp to make the layers stick between them) * wall",
"overlap: 40 % * flow: 115 % But all these",
"of pressure resistants. I am currently trying to print a",
"of a model for a pressure resistant\")](https://i.stack.imgur.com/IQyNO.png \"Screenshot of a",
"are the parameters that I have changed in Cura: *",
"resistant cut in two to show internal structure\") Do you",
"a model for a pressure resistant\") Here are the parameters",
"ABS. It's not even airtight at 2.5 bar: [![Photo of",
"the print : [![Photo of pressure resistant cut in two",
"\"Screenshot of a model for a pressure resistant\") Here are",
"want to make some prints of pressure resistants. I am",
"made for this: [![Screenshot of a model for a pressure",
"Do you have any ideas/suggestions to have better results? Can",
"print : [![Photo of pressure resistant cut in two to",
"Should I try using PETG? What could I change in",
"the layers, is this normal for ABS? Should I try",
"have changed in Cura: * layer height: 0.1 mm *",
"water producing bubbles; not airtight\")](https://i.stack.imgur.com/rt0B8.jpg \"Photo of pressure resistant under",
"stick between them) * wall line count: 5 * infill",
"\"Photo of pressure resistant cut in two to show internal",
"have any ideas/suggestions to have better results? Can it be",
"for this: [![Screenshot of a model for a pressure resistant](https://i.stack.imgur.com/IQyNO.png",
"you have any ideas/suggestions to have better results? Can it",
"print temp: 250 °C (high temp to make the layers",
"\"Photo of pressure resistant under water producing bubbles; not airtight\")",
"good results for ABS. It's not even airtight at 2.5",
"\"Photo of pressure resistant under water producing bubbles; not airtight\")](https://i.stack.imgur.com/rt0B8.jpg",
"airtight](https://i.stack.imgur.com/rt0B8.jpg \"Photo of pressure resistant under water producing bubbles; not",
"better results? Can it be from the ABS itself? There",
"powder between the layers, is this normal for ABS? Should",
"a pressure resistant\") Here are the parameters that I have",
"resistant under water producing bubbles; not airtight\") And here is",
"two to show internal structure\")](https://i.stack.imgur.com/EkNP6.jpg \"Photo of pressure resistant cut",
"to make my prints airtight (by airtight I mean, it",
"internal structure\") Do you have any ideas/suggestions to have better",
"I try using PETG? What could I change in my",
"cut in two to show internal structure](https://i.stack.imgur.com/EkNP6.jpg \"Photo of pressure",
"layer height: 0.1 mm * infill : 100 % *",
"not airtight\")](https://i.stack.imgur.com/rt0B8.jpg \"Photo of pressure resistant under water producing bubbles;",
"the layers stick between them) * wall line count: 5",
"temp: 250 °C (high temp to make the layers stick",
"make some prints of pressure resistants. I am currently trying",
"simple cylinder to find the best parameters to make my",
"% * flow: 115 % But all these changes in",
"to print a simple cylinder to find the best parameters"
] |
[
"have any input? I am anyway just going to do",
"for parts that don't fit in the holder that came",
"solution, I have a wide range of them from degreaser,",
"This already eliminates PLA, but I think PETG should still",
"wide range of them from degreaser, deruster, and so on.",
"in the holder that came with the cleaners. I was",
"issues with warm (not hot) water, I'd say something along",
"there something I am missing? Does anyone have any input?",
"not have issues with warm (not hot) water, I'd say",
"°C). Is there something I am missing? Does anyone have",
"* Material should not have issues with warm (not hot)",
"for my ultrasonic cleaners. They are supposed to be used",
"couple of holders for my ultrasonic cleaners. They are supposed",
"I would say PETG or PLA should be a safe",
"warm (not hot) water, I'd say something along the lines",
"say something along the lines of 60-80 °C. This already",
"of holders for my ultrasonic cleaners. They are supposed to",
"something along the lines of 60-80 °C. This already eliminates",
"I am trying to create a couple of holders for",
"do a few tests, but I assume starting with PETG",
"should be a safe bet as it reacts with almost",
"this. My initial thoughts are: * Material should hold up",
"input? I am anyway just going to do a few",
"and so on. I would say PETG or PLA should",
"is best to use for this. My initial thoughts are:",
"have a wide range of them from degreaser, deruster, and",
"Is there something I am missing? Does anyone have any",
"trying to create a couple of holders for my ultrasonic",
"be a safe bet as it reacts with almost nothing",
"have issues with warm (not hot) water, I'd say something",
"don't fit in the holder that came with the cleaners.",
"am anyway just going to do a few tests, but",
"along the lines of 60-80 °C. This already eliminates PLA,",
"cleaners. They are supposed to be used for parts that",
"use for this. My initial thoughts are: * Material should",
"(not hot) water, I'd say something along the lines of",
"with almost nothing * Material should not have issues with",
"was wondering what material is best to use for this.",
"already eliminates PLA, but I think PETG should still be",
"(I am aiming more towards 60 °C than 80 °C).",
"parts that don't fit in the holder that came with",
"anyway just going to do a few tests, but I",
"water, I'd say something along the lines of 60-80 °C.",
"any input? I am anyway just going to do a",
"I am anyway just going to do a few tests,",
"up to the cleaning solution, I have a wide range",
"it reacts with almost nothing * Material should not have",
"with warm (not hot) water, I'd say something along the",
"hot) water, I'd say something along the lines of 60-80",
"that came with the cleaners. I was wondering what material",
"should hold up to the cleaning solution, I have a",
"as it reacts with almost nothing * Material should not",
"more towards 60 °C than 80 °C). Is there something",
"say PETG or PLA should be a safe bet as",
"would say PETG or PLA should be a safe bet",
"I'd say something along the lines of 60-80 °C. This",
"degreaser, deruster, and so on. I would say PETG or",
"a couple of holders for my ultrasonic cleaners. They are",
"my ultrasonic cleaners. They are supposed to be used for",
"Does anyone have any input? I am anyway just going",
"what material is best to use for this. My initial",
"the holder that came with the cleaners. I was wondering",
"safe bet as it reacts with almost nothing * Material",
"the cleaners. I was wondering what material is best to",
"bet as it reacts with almost nothing * Material should",
"to be used for parts that don't fit in the",
"60 °C than 80 °C). Is there something I am",
"of 60-80 °C. This already eliminates PLA, but I think",
"be used for parts that don't fit in the holder",
"initial thoughts are: * Material should hold up to the",
"80 °C). Is there something I am missing? Does anyone",
"a safe bet as it reacts with almost nothing *",
"still be OK-ish (I am aiming more towards 60 °C",
"but I assume starting with PETG is a good start.",
"so on. I would say PETG or PLA should be",
"am aiming more towards 60 °C than 80 °C). Is",
"am trying to create a couple of holders for my",
"should still be OK-ish (I am aiming more towards 60",
"lines of 60-80 °C. This already eliminates PLA, but I",
"PLA, but I think PETG should still be OK-ish (I",
"to use for this. My initial thoughts are: * Material",
"few tests, but I assume starting with PETG is a",
"Material should not have issues with warm (not hot) water,",
"material is best to use for this. My initial thoughts",
"are supposed to be used for parts that don't fit",
"am missing? Does anyone have any input? I am anyway",
"°C. This already eliminates PLA, but I think PETG should",
"with the cleaners. I was wondering what material is best",
"PETG or PLA should be a safe bet as it",
"60-80 °C. This already eliminates PLA, but I think PETG",
"nothing * Material should not have issues with warm (not",
"missing? Does anyone have any input? I am anyway just",
"to do a few tests, but I assume starting with",
"Material should hold up to the cleaning solution, I have",
"from degreaser, deruster, and so on. I would say PETG",
"OK-ish (I am aiming more towards 60 °C than 80",
"I am missing? Does anyone have any input? I am",
"going to do a few tests, but I assume starting",
"that don't fit in the holder that came with the",
"PLA should be a safe bet as it reacts with",
"I was wondering what material is best to use for",
"thoughts are: * Material should hold up to the cleaning",
"are: * Material should hold up to the cleaning solution,",
"should not have issues with warm (not hot) water, I'd",
"the lines of 60-80 °C. This already eliminates PLA, but",
"supposed to be used for parts that don't fit in",
"deruster, and so on. I would say PETG or PLA",
"cleaning solution, I have a wide range of them from",
"create a couple of holders for my ultrasonic cleaners. They",
"holder that came with the cleaners. I was wondering what",
"a few tests, but I assume starting with PETG is",
"used for parts that don't fit in the holder that",
"a wide range of them from degreaser, deruster, and so",
"aiming more towards 60 °C than 80 °C). Is there",
"°C than 80 °C). Is there something I am missing?",
"for this. My initial thoughts are: * Material should hold",
"anyone have any input? I am anyway just going to",
"to create a couple of holders for my ultrasonic cleaners.",
"cleaners. I was wondering what material is best to use",
"ultrasonic cleaners. They are supposed to be used for parts",
"be OK-ish (I am aiming more towards 60 °C than",
"holders for my ultrasonic cleaners. They are supposed to be",
"than 80 °C). Is there something I am missing? Does",
"They are supposed to be used for parts that don't",
"range of them from degreaser, deruster, and so on. I",
"them from degreaser, deruster, and so on. I would say",
"best to use for this. My initial thoughts are: *",
"just going to do a few tests, but I assume",
"PETG should still be OK-ish (I am aiming more towards",
"towards 60 °C than 80 °C). Is there something I",
"I have a wide range of them from degreaser, deruster,",
"but I think PETG should still be OK-ish (I am",
"wondering what material is best to use for this. My",
"almost nothing * Material should not have issues with warm",
"I think PETG should still be OK-ish (I am aiming",
"fit in the holder that came with the cleaners. I",
"My initial thoughts are: * Material should hold up to",
"or PLA should be a safe bet as it reacts",
"the cleaning solution, I have a wide range of them",
"on. I would say PETG or PLA should be a",
"* Material should hold up to the cleaning solution, I",
"reacts with almost nothing * Material should not have issues",
"came with the cleaners. I was wondering what material is",
"eliminates PLA, but I think PETG should still be OK-ish",
"of them from degreaser, deruster, and so on. I would",
"hold up to the cleaning solution, I have a wide",
"think PETG should still be OK-ish (I am aiming more",
"something I am missing? Does anyone have any input? I",
"tests, but I assume starting with PETG is a good",
"to the cleaning solution, I have a wide range of"
] |
[
"well anyway if I swap out the stock nozzle. 3.",
"need to adjust the settings on the printer as well",
"because PLA melts as such a low temperature. Recommendations are",
"a low temperature. Recommendations are welcome here, and whether I",
"a food safe nozzle if it can be managed. So,",
"resin. It seems there are several food-safe brands. Would such",
"assume I will need to adjust the settings on the",
"the stock nozzle. 3. Another procedure my research yielded was",
"if the PLA isn't itself officially food safe would just",
"on or dip the 3D print? 3a. Even if the",
"I will need to adjust the settings on the printer",
"PLA melts as such a low temperature. Recommendations are welcome",
"a classroom. I would like my students to be able",
"know I need a food-safe material AND a food safe",
"which I should use (if any) are welcome. Especially as",
"I think is 0.4mm? I assume I will need to",
"3. Another procedure my research yielded was that I would",
"to acidic liquids like orange juice and the like? What",
"and the like? What about alcohol? I know they won't",
"that I would probably want to coat the 3D prints",
"with coffee or something because PLA melts as such a",
"I am told stainless steel nozzles are best. I saw",
"sold on amazon and the like that will supposedly fit",
"the printer as well anyway if I swap out the",
"It seems there are several food-safe brands. Would such resins",
"won't work with coffee or something because PLA melts as",
"Is there a material data sheet for the PLA filament",
"out the stock nozzle. 3. Another procedure my research yielded",
"are welcome. Especially as the nozzle width will differ, the",
"or something because PLA melts as such a low temperature.",
"something because PLA melts as such a low temperature. Recommendations",
"I assume I will need to adjust the settings on",
"whether I should paint on or dip the 3D print?",
"I need a food-safe material AND a food safe nozzle",
"so the general one doesn't seem to be what I",
"orange juice and the like? What about alcohol? I know",
"in resin. It seems there are several food-safe brands. Would",
"Recs on which I should use (if any) are welcome.",
"to print cups and stuff to drink from if they",
"be what I need. If anyone knows where to find",
"work with coffee or something because PLA melts as such",
"wanted to check the following: 1. Is there a material",
"acidic liquids like orange juice and the like? What about",
"the 3D prints in resin. It seems there are several",
"Extruders. Recs on which I should use (if any) are",
"data sheet for the PLA filament that Makerbots use? I",
"printers and one Z18 in a classroom. I would like",
"I know I need a food-safe material AND a food",
"safe nozzle if it can be managed. So, I wanted",
"brands. Would such resins stand up to acidic liquids like",
"the PLA filament that Makerbots use? I am told you",
"be able to print cups and stuff to drink from",
"are best. I saw several sold on amazon and the",
"that will supposedly fit the Smart Extruders. Recs on which",
"as such a low temperature. Recommendations are welcome here, and",
"a food-safe material AND a food safe nozzle if it",
"like? What about alcohol? I know they won't work with",
"in resin solve that problem? Any assistance here is much",
"to be what I need. If anyone knows where to",
"I saw several sold on amazon and the like that",
"if I swap out the stock nozzle. 3. Another procedure",
"in a classroom. I would like my students to be",
"research yielded was that I would probably want to coat",
"there a material data sheet for the PLA filament that",
"it in resin solve that problem? Any assistance here is",
"to find it, please let me know. 2. I am",
"the Smart Extruders. Recs on which I should use (if",
"want to coat the 3D prints in resin. It seems",
"yielded was that I would probably want to coat the",
"I should use (if any) are welcome. Especially as the",
"drink from if they want. I know I need a",
"I am told you need to check for each color,",
"nozzle if it can be managed. So, I wanted to",
"Would such resins stand up to acidic liquids like orange",
"should paint on or dip the 3D print? 3a. Even",
"it, please let me know. 2. I am told stainless",
"I should paint on or dip the 3D print? 3a.",
"supposedly fit the Smart Extruders. Recs on which I should",
"anyone knows where to find it, please let me know.",
"material data sheet for the PLA filament that Makerbots use?",
"coating it in resin solve that problem? Any assistance here",
"it can be managed. So, I wanted to check the",
"probably want to coat the 3D prints in resin. It",
"the like? What about alcohol? I know they won't work",
"2. I am told stainless steel nozzles are best. I",
"Especially as the nozzle width will differ, the stock nozzle",
"what I need. If anyone knows where to find it,",
"one Z18 in a classroom. I would like my students",
"you need to check for each color, so the general",
"need to check for each color, so the general one",
"any) are welcome. Especially as the nozzle width will differ,",
"is 0.4mm? I assume I will need to adjust the",
"to check for each color, so the general one doesn't",
"doesn't seem to be what I need. If anyone knows",
"amazon and the like that will supposedly fit the Smart",
"alcohol? I know they won't work with coffee or something",
"juice and the like? What about alcohol? I know they",
"of Makerbot Replicator+ printers and one Z18 in a classroom.",
"PLA isn't itself officially food safe would just coating it",
"PLA filament that Makerbots use? I am told you need",
"such a low temperature. Recommendations are welcome here, and whether",
"would just coating it in resin solve that problem? Any",
"stock nozzle I think is 0.4mm? I assume I will",
"liquids like orange juice and the like? What about alcohol?",
"print? 3a. Even if the PLA isn't itself officially food",
"best. I saw several sold on amazon and the like",
"isn't itself officially food safe would just coating it in",
"safe would just coating it in resin solve that problem?",
"prints in resin. It seems there are several food-safe brands.",
"classroom. I would like my students to be able to",
"if it can be managed. So, I wanted to check",
"will differ, the stock nozzle I think is 0.4mm? I",
"nozzles are best. I saw several sold on amazon and",
"as the nozzle width will differ, the stock nozzle I",
"told stainless steel nozzles are best. I saw several sold",
"managed. So, I wanted to check the following: 1. Is",
"I swap out the stock nozzle. 3. Another procedure my",
"1. Is there a material data sheet for the PLA",
"seems there are several food-safe brands. Would such resins stand",
"material AND a food safe nozzle if it can be",
"for the PLA filament that Makerbots use? I am told",
"Smart Extruders. Recs on which I should use (if any)",
"settings on the printer as well anyway if I swap",
"coffee or something because PLA melts as such a low",
"knows where to find it, please let me know. 2.",
"the like that will supposedly fit the Smart Extruders. Recs",
"able to print cups and stuff to drink from if",
"Even if the PLA isn't itself officially food safe would",
"Another procedure my research yielded was that I would probably",
"use (if any) are welcome. Especially as the nozzle width",
"resin solve that problem? Any assistance here is much appreciated.",
"find it, please let me know. 2. I am told",
"up to acidic liquids like orange juice and the like?",
"me know. 2. I am told stainless steel nozzles are",
"Makerbot Replicator+ printers and one Z18 in a classroom. I",
"like that will supposedly fit the Smart Extruders. Recs on",
"and stuff to drink from if they want. I know",
"itself officially food safe would just coating it in resin",
"like orange juice and the like? What about alcohol? I",
"welcome here, and whether I should paint on or dip",
"stock nozzle. 3. Another procedure my research yielded was that",
"about alcohol? I know they won't work with coffee or",
"I wanted to check the following: 1. Is there a",
"following: 1. Is there a material data sheet for the",
"a material data sheet for the PLA filament that Makerbots",
"that Makerbots use? I am told you need to check",
"the settings on the printer as well anyway if I",
"my research yielded was that I would probably want to",
"use? I am told you need to check for each",
"would probably want to coat the 3D prints in resin.",
"with a bunch of Makerbot Replicator+ printers and one Z18",
"width will differ, the stock nozzle I think is 0.4mm?",
"AND a food safe nozzle if it can be managed.",
"be managed. So, I wanted to check the following: 1.",
"several sold on amazon and the like that will supposedly",
"steel nozzles are best. I saw several sold on amazon",
"differ, the stock nozzle I think is 0.4mm? I assume",
"there are several food-safe brands. Would such resins stand up",
"nozzle width will differ, the stock nozzle I think is",
"several food-safe brands. Would such resins stand up to acidic",
"paint on or dip the 3D print? 3a. Even if",
"from if they want. I know I need a food-safe",
"my students to be able to print cups and stuff",
"food safe would just coating it in resin solve that",
"to coat the 3D prints in resin. It seems there",
"please let me know. 2. I am told stainless steel",
"temperature. Recommendations are welcome here, and whether I should paint",
"to drink from if they want. I know I need",
"print cups and stuff to drink from if they want.",
"to be able to print cups and stuff to drink",
"Makerbots use? I am told you need to check for",
"and whether I should paint on or dip the 3D",
"and one Z18 in a classroom. I would like my",
"3D prints in resin. It seems there are several food-safe",
"need a food-safe material AND a food safe nozzle if",
"swap out the stock nozzle. 3. Another procedure my research",
"melts as such a low temperature. Recommendations are welcome here,",
"sheet for the PLA filament that Makerbots use? I am",
"check for each color, so the general one doesn't seem",
"Replicator+ printers and one Z18 in a classroom. I would",
"color, so the general one doesn't seem to be what",
"on amazon and the like that will supposedly fit the",
"general one doesn't seem to be what I need. If",
"If anyone knows where to find it, please let me",
"they won't work with coffee or something because PLA melts",
"the following: 1. Is there a material data sheet for",
"saw several sold on amazon and the like that will",
"they want. I know I need a food-safe material AND",
"I need. If anyone knows where to find it, please",
"0.4mm? I assume I will need to adjust the settings",
"like my students to be able to print cups and",
"dip the 3D print? 3a. Even if the PLA isn't",
"think is 0.4mm? I assume I will need to adjust",
"if they want. I know I need a food-safe material",
"seem to be what I need. If anyone knows where",
"as well anyway if I swap out the stock nozzle.",
"What about alcohol? I know they won't work with coffee",
"or dip the 3D print? 3a. Even if the PLA",
"Z18 in a classroom. I would like my students to",
"was that I would probably want to coat the 3D",
"I know they won't work with coffee or something because",
"should use (if any) are welcome. Especially as the nozzle",
"stuff to drink from if they want. I know I",
"am told you need to check for each color, so",
"nozzle I think is 0.4mm? I assume I will need",
"such resins stand up to acidic liquids like orange juice",
"Recommendations are welcome here, and whether I should paint on",
"where to find it, please let me know. 2. I",
"the general one doesn't seem to be what I need.",
"the nozzle width will differ, the stock nozzle I think",
"procedure my research yielded was that I would probably want",
"just coating it in resin solve that problem? Any assistance",
"fit the Smart Extruders. Recs on which I should use",
"3D print? 3a. Even if the PLA isn't itself officially",
"can be managed. So, I wanted to check the following:",
"the stock nozzle I think is 0.4mm? I assume I",
"for each color, so the general one doesn't seem to",
"coat the 3D prints in resin. It seems there are",
"printer as well anyway if I swap out the stock",
"stand up to acidic liquids like orange juice and the",
"am working with a bunch of Makerbot Replicator+ printers and",
"filament that Makerbots use? I am told you need to",
"the PLA isn't itself officially food safe would just coating",
"here, and whether I should paint on or dip the",
"low temperature. Recommendations are welcome here, and whether I should",
"the 3D print? 3a. Even if the PLA isn't itself",
"let me know. 2. I am told stainless steel nozzles",
"welcome. Especially as the nozzle width will differ, the stock",
"officially food safe would just coating it in resin solve",
"on which I should use (if any) are welcome. Especially",
"working with a bunch of Makerbot Replicator+ printers and one",
"3a. Even if the PLA isn't itself officially food safe",
"will supposedly fit the Smart Extruders. Recs on which I",
"to check the following: 1. Is there a material data",
"told you need to check for each color, so the",
"I would like my students to be able to print",
"(if any) are welcome. Especially as the nozzle width will",
"adjust the settings on the printer as well anyway if",
"I would probably want to coat the 3D prints in",
"food-safe brands. Would such resins stand up to acidic liquids",
"know they won't work with coffee or something because PLA",
"am told stainless steel nozzles are best. I saw several",
"need. If anyone knows where to find it, please let",
"students to be able to print cups and stuff to",
"know. 2. I am told stainless steel nozzles are best.",
"stainless steel nozzles are best. I saw several sold on",
"anyway if I swap out the stock nozzle. 3. Another",
"resins stand up to acidic liquids like orange juice and",
"I am working with a bunch of Makerbot Replicator+ printers",
"are several food-safe brands. Would such resins stand up to",
"each color, so the general one doesn't seem to be",
"cups and stuff to drink from if they want. I",
"food-safe material AND a food safe nozzle if it can",
"are welcome here, and whether I should paint on or",
"and the like that will supposedly fit the Smart Extruders.",
"want. I know I need a food-safe material AND a",
"will need to adjust the settings on the printer as",
"to adjust the settings on the printer as well anyway",
"nozzle. 3. Another procedure my research yielded was that I",
"one doesn't seem to be what I need. If anyone",
"check the following: 1. Is there a material data sheet",
"on the printer as well anyway if I swap out",
"would like my students to be able to print cups",
"bunch of Makerbot Replicator+ printers and one Z18 in a",
"So, I wanted to check the following: 1. Is there",
"a bunch of Makerbot Replicator+ printers and one Z18 in",
"food safe nozzle if it can be managed. So, I"
] |
[
"this rugged case that was originally created using injection molding:",
"Unfortunately, I don't know which material this is, and I",
"want to 3D print it. I would like to use",
"protect the electronics against drops when the case falls onto",
"don't know which material this is, and I don't know",
"\"ea weather proofed tablet with over-molded rubber\")](https://i.stack.imgur.com/oL8JW.jpg \"ea weather proofed",
"with over-molded rubber\") The outside consists of a material that",
"a softer outer hull and can tell me which material",
"I don't know which method I could use to measure",
"It is used to protect the electronics against drops when",
"a material that is a bit softer than the main",
"with such a softer outer hull and can tell me",
"which material could be used when I want to 3D",
"outside consists of a material that is a bit softer",
"print it. I would like to use this case in",
"which method I could use to measure its softness. I",
"anybody has experience with such a softer outer hull and",
"case that was originally created using injection molding: [![ea weather",
"rubber](https://i.stack.imgur.com/oL8JW.jpg \"ea weather proofed tablet with over-molded rubber\")](https://i.stack.imgur.com/oL8JW.jpg \"ea weather",
"over-molded rubber\") The outside consists of a material that is",
"a custom version of something akin to this rugged case",
"experience with such a softer outer hull and can tell",
"a bit softer than the main body. It is used",
"can tell me which material could be used when I",
"don't know which method I could use to measure its",
"and I don't know which method I could use to",
"custom version of something akin to this rugged case that",
"proofed tablet with over-molded rubber\") The outside consists of a",
"originally created using injection molding: [![ea weather proofed tablet with",
"bit softer than the main body. It is used to",
"would like to use this case in a hospital environment.",
"to measure its softness. I would therefore like to ask",
"and can tell me which material could be used when",
"The outside consists of a material that is a bit",
"that was originally created using injection molding: [![ea weather proofed",
"hull and can tell me which material could be used",
"material could be used when I want to 3D print",
"with over-molded rubber\")](https://i.stack.imgur.com/oL8JW.jpg \"ea weather proofed tablet with over-molded rubber\")",
"something akin to this rugged case that was originally created",
"like to print a custom version of something akin to",
"of something akin to this rugged case that was originally",
"falls onto the floor. Unfortunately, I don't know which material",
"body. It is used to protect the electronics against drops",
"has experience with such a softer outer hull and can",
"using injection molding: [![ea weather proofed tablet with over-molded rubber](https://i.stack.imgur.com/oL8JW.jpg",
"which material this is, and I don't know which method",
"weather proofed tablet with over-molded rubber\") The outside consists of",
"I would like to use this case in a hospital",
"[![ea weather proofed tablet with over-molded rubber](https://i.stack.imgur.com/oL8JW.jpg \"ea weather proofed",
"softness. I would therefore like to ask if anybody has",
"rubber\")](https://i.stack.imgur.com/oL8JW.jpg \"ea weather proofed tablet with over-molded rubber\") The outside",
"me which material could be used when I want to",
"of a material that is a bit softer than the",
"the electronics against drops when the case falls onto the",
"the main body. It is used to protect the electronics",
"when I want to 3D print it. I would like",
"weather proofed tablet with over-molded rubber](https://i.stack.imgur.com/oL8JW.jpg \"ea weather proofed tablet",
"I could use to measure its softness. I would therefore",
"is used to protect the electronics against drops when the",
"could use to measure its softness. I would therefore like",
"would like to print a custom version of something akin",
"it. I would like to use this case in a",
"measure its softness. I would therefore like to ask if",
"\"ea weather proofed tablet with over-molded rubber\") The outside consists",
"like to ask if anybody has experience with such a",
"method I could use to measure its softness. I would",
"I want to 3D print it. I would like to",
"proofed tablet with over-molded rubber](https://i.stack.imgur.com/oL8JW.jpg \"ea weather proofed tablet with",
"molding: [![ea weather proofed tablet with over-molded rubber](https://i.stack.imgur.com/oL8JW.jpg \"ea weather",
"over-molded rubber\")](https://i.stack.imgur.com/oL8JW.jpg \"ea weather proofed tablet with over-molded rubber\") The",
"case falls onto the floor. Unfortunately, I don't know which",
"softer than the main body. It is used to protect",
"such a softer outer hull and can tell me which",
"than the main body. It is used to protect the",
"with over-molded rubber](https://i.stack.imgur.com/oL8JW.jpg \"ea weather proofed tablet with over-molded rubber\")](https://i.stack.imgur.com/oL8JW.jpg",
"consists of a material that is a bit softer than",
"if anybody has experience with such a softer outer hull",
"to 3D print it. I would like to use this",
"akin to this rugged case that was originally created using",
"rubber\") The outside consists of a material that is a",
"material that is a bit softer than the main body.",
"to print a custom version of something akin to this",
"would therefore like to ask if anybody has experience with",
"electronics against drops when the case falls onto the floor.",
"onto the floor. Unfortunately, I don't know which material this",
"is, and I don't know which method I could use",
"to ask if anybody has experience with such a softer",
"tablet with over-molded rubber\")](https://i.stack.imgur.com/oL8JW.jpg \"ea weather proofed tablet with over-molded",
"could be used when I want to 3D print it.",
"the case falls onto the floor. Unfortunately, I don't know",
"to this rugged case that was originally created using injection",
"to protect the electronics against drops when the case falls",
"its softness. I would therefore like to ask if anybody",
"used to protect the electronics against drops when the case",
"print a custom version of something akin to this rugged",
"that is a bit softer than the main body. It",
"I would therefore like to ask if anybody has experience",
"outer hull and can tell me which material could be",
"know which material this is, and I don't know which",
"proofed tablet with over-molded rubber\")](https://i.stack.imgur.com/oL8JW.jpg \"ea weather proofed tablet with",
"tablet with over-molded rubber\") The outside consists of a material",
"I don't know which material this is, and I don't",
"rugged case that was originally created using injection molding: [![ea",
"drops when the case falls onto the floor. Unfortunately, I",
"I would like to print a custom version of something",
"be used when I want to 3D print it. I",
"is a bit softer than the main body. It is",
"3D print it. I would like to use this case",
"when the case falls onto the floor. Unfortunately, I don't",
"version of something akin to this rugged case that was",
"created using injection molding: [![ea weather proofed tablet with over-molded",
"injection molding: [![ea weather proofed tablet with over-molded rubber](https://i.stack.imgur.com/oL8JW.jpg \"ea",
"was originally created using injection molding: [![ea weather proofed tablet",
"ask if anybody has experience with such a softer outer",
"tablet with over-molded rubber](https://i.stack.imgur.com/oL8JW.jpg \"ea weather proofed tablet with over-molded",
"tell me which material could be used when I want",
"used when I want to 3D print it. I would",
"softer outer hull and can tell me which material could",
"know which method I could use to measure its softness.",
"this is, and I don't know which method I could",
"material this is, and I don't know which method I",
"use to measure its softness. I would therefore like to",
"therefore like to ask if anybody has experience with such",
"floor. Unfortunately, I don't know which material this is, and",
"against drops when the case falls onto the floor. Unfortunately,",
"weather proofed tablet with over-molded rubber\")](https://i.stack.imgur.com/oL8JW.jpg \"ea weather proofed tablet",
"main body. It is used to protect the electronics against",
"the floor. Unfortunately, I don't know which material this is,",
"over-molded rubber](https://i.stack.imgur.com/oL8JW.jpg \"ea weather proofed tablet with over-molded rubber\")](https://i.stack.imgur.com/oL8JW.jpg \"ea"
] |
[
"place. The under extrusion not only occurs on first layer.",
"direction is rotated 90 degrees. I have tried the following",
"a delta printer running Marlin 2.1. Slice with SuperSlicer. The",
"extruded, but not at the same place as first layer,",
"only occurs on first layer. I noticed the second layer",
"2.1. Slice with SuperSlicer. The top layer doesn't seem to",
"under extrusion not only occurs on first layer. I noticed",
"but not at the same place as first layer, because",
"at the same place. The under extrusion not only occurs",
"also has some part under extruded, but not at the",
"the following but could not solve the problem: 1. Delta",
"some part under extruded, but not at the same place",
"rotated 90 degrees. I have tried the following but could",
"90 degrees. I have tried the following but could not",
"seem to have under extrusion. There is even a bit",
"the same place as first layer, because the infill line",
"adjustment 3. Filament flow calibration It's a delta printer running",
"on first layer. I noticed the second layer also has",
"degrees. I have tried the following but could not solve",
"Filament flow calibration It's a delta printer running Marlin 2.1.",
"1. Delta calibration (leveling) 2. z=0 gap adjustment 3. Filament",
"delta printer running Marlin 2.1. Slice with SuperSlicer. The top",
"is even a bit over extrusion at the corner. [](https://i.stack.imgur.com/TaqNr.jpg) When I print the gcode repeatly, under",
"same place as first layer, because the infill line direction",
"(leveling) 2. z=0 gap adjustment 3. Filament flow calibration It's",
"printer running Marlin 2.1. Slice with SuperSlicer. The top layer",
"the problem: 1. Delta calibration (leveling) 2. z=0 gap adjustment",
"happens at the same place. The under extrusion not only",
"first layer. I noticed the second layer also has some",
"not solve the problem: 1. Delta calibration (leveling) 2. z=0",
"extrusion not only occurs on first layer. I noticed the",
"I print the gcode repeatly, under extrusion happens at the",
"flow calibration It's a delta printer running Marlin 2.1. Slice",
"under extrusion. There is even a bit over extrusion at",
"problem: 1. Delta calibration (leveling) 2. z=0 gap adjustment 3.",
"could not solve the problem: 1. Delta calibration (leveling) 2.",
"layer, because the infill line direction is rotated 90 degrees.",
"top layer doesn't seem to have under extrusion. There is",
"has some part under extruded, but not at the same",
"part under extruded, but not at the same place as",
"a bit over extrusion at the corner. [](https://i.stack.imgur.com/TaqNr.jpg) When I print the gcode repeatly, under extrusion",
"the gcode repeatly, under extrusion happens at the same place.",
"because the infill line direction is rotated 90 degrees. I",
"layer. I noticed the second layer also has some part",
"The top layer doesn't seem to have under extrusion. There",
"I noticed the second layer also has some part under",
"[](https://i.stack.imgur.com/TaqNr.jpg) When I print the gcode repeatly,",
"with SuperSlicer. The top layer doesn't seem to have under",
"bit over extrusion at the corner. [](https://i.stack.imgur.com/XF2Bf.jpg)",
"as first layer, because the infill line direction is rotated",
"but could not solve the problem: 1. Delta calibration (leveling)",
"SuperSlicer. The top layer doesn't seem to have under extrusion.",
"not at the same place as first layer, because the",
"extrusion happens at the same place. The under extrusion not",
"the same place. The under extrusion not only occurs on",
"have under extrusion. There is even a bit over extrusion",
"occurs on first layer. I noticed the second layer also",
"have tried the following but could not solve the problem:",
"infill line direction is rotated 90 degrees. I have tried",
"extrusion. There is even a bit over extrusion at the",
"layer doesn't seem to have under extrusion. There is even",
"calibration It's a delta printer running Marlin 2.1. Slice with",
"here](https://i.stack.imgur.com/TaqNr.jpg)](https://i.stack.imgur.com/TaqNr.jpg) When I print the gcode repeatly, under extrusion happens",
"is rotated 90 degrees. I have tried the following but",
"repeatly, under extrusion happens at the same place. The under",
"gap adjustment 3. Filament flow calibration It's a delta printer",
"Delta calibration (leveling) 2. z=0 gap adjustment 3. Filament flow",
"same place. The under extrusion not only occurs on first",
"place as first layer, because the infill line direction is",
"line direction is rotated 90 degrees. I have tried the",
"When I print the gcode repeatly, under extrusion happens at"
] |
[
"but in this case it is obvious it will not",
"the air (blue line), where instead it can continue going",
"to print first the outer layer but in this case",
"here](https://i.stack.imgur.com/PCetc.jpg)](https://i.stack.imgur.com/PCetc.jpg) Any idea how to configure PrusaSlicer to avoid this",
"PrusaSlicer decides to move and print in the air (blue",
"words what's happening, so take a look at the picture.",
"inward. I understand it wants to print first the outer",
"position is shown in the second image. [](https://i.stack.imgur.com/iB1fc.jpg) The",
"take a look at the picture. Somehow PrusaSlicer decides to",
"that layer. The final position is shown in the second",
"it will not hold that layer. The final position is",
"happening, so take a look at the picture. Somehow PrusaSlicer",
"in the air (blue line), where instead it can continue",
"it can continue going from outwards to inward. I understand",
"from outwards to inward. I understand it wants to print",
"going from outwards to inward. I understand it wants to",
"to describe with words what's happening, so take a look",
"final position is shown in the second image. [](https://i.stack.imgur.com/iB1fc.jpg)",
"outer layer but in this case it is obvious it",
"description here](https://i.stack.imgur.com/PCetc.jpg)](https://i.stack.imgur.com/PCetc.jpg) Any idea how to configure PrusaSlicer to avoid",
"so take a look at the picture. Somehow PrusaSlicer decides",
"It is difficult to describe with words what's happening, so",
"decides to move and print in the air (blue line),",
"line), where instead it can continue going from outwards to",
"first the outer layer but in this case it is",
"to move and print in the air (blue line), where",
"continue going from outwards to inward. I understand it wants",
"final step of that layer: [](https://i.stack.imgur.com/PCetc.jpg) Any",
"of that layer: [](https://i.stack.imgur.com/PCetc.jpg) Any idea how",
"in the second image. [](https://i.stack.imgur.com/iB1fc.jpg) The final step of",
"is obvious it will not hold that layer. The final",
"shown in the second image. [](https://i.stack.imgur.com/iB1fc.jpg) The final step",
"air (blue line), where instead it can continue going from",
"layer. The final position is shown in the second image.",
"describe with words what's happening, so take a look at",
"print in the air (blue line), where instead it can",
"I understand it wants to print first the outer layer",
"it wants to print first the outer layer but in",
"(blue line), where instead it can continue going from outwards",
"wants to print first the outer layer but in this",
"layer but in this case it is obvious it will",
"[](https://i.stack.imgur.com/iB1fc.jpg) The final step of that layer: [](https://i.stack.imgur.com/iB1fc.jpg) The final step of that layer: [](https://i.stack.imgur.com/iB1fc.jpg) The final step of that layer: [](https://i.stack.imgur.com/PCetc.jpg) Any idea how to configure",
"is difficult to describe with words what's happening, so take",
"what's happening, so take a look at the picture. Somehow",
"it is obvious it will not hold that layer. The",
"not hold that layer. The final position is shown in",
"to inward. I understand it wants to print first the",
"can continue going from outwards to inward. I understand it",
"where instead it can continue going from outwards to inward.",
"the second image. [](https://i.stack.imgur.com/iB1fc.jpg) The final step of that",
"a look at the picture. Somehow PrusaSlicer decides to move",
"outwards to inward. I understand it wants to print first",
"The final step of that layer: [](https://i.stack.imgur.com/PCetc.jpg)",
"instead it can continue going from outwards to inward. I",
"the outer layer but in this case it is obvious",
"Any idea how to configure PrusaSlicer to avoid this situation?",
"is shown in the second image. [](https://i.stack.imgur.com/iB1fc.jpg) The final",
"hold that layer. The final position is shown in the",
"difficult to describe with words what's happening, so take a",
"The final position is shown in the second image. [](https://i.stack.imgur.com/PCetc.jpg) Any idea how to configure PrusaSlicer",
"Somehow PrusaSlicer decides to move and print in the air",
"print first the outer layer but in this case it",
"image description here](https://i.stack.imgur.com/PCetc.jpg)](https://i.stack.imgur.com/PCetc.jpg) Any idea how to configure PrusaSlicer to",
"understand it wants to print first the outer layer but",
"picture. Somehow PrusaSlicer decides to move and print in the",
"this case it is obvious it will not hold that",
"step of that layer: [](https://i.stack.imgur.com/PCetc.jpg) Any idea",
"second image. [](https://i.stack.imgur.com/iB1fc.jpg) The final step of that layer:",
"that layer: [](https://i.stack.imgur.com/PCetc.jpg) Any idea how to"
] |
[
"at end of print](https://3dprinting.stackexchange.com/questions/11056/writing-g-code-audible-alert-at-end-of-print)\" and it seems everything needed to",
"to implement audible alerts is built into the G-code syntax",
"my rig appears to be lacking the necessary noise maker.",
"have any sound device incorporated. I've read \"[Writing G-Code: Audible",
"firmware but my rig appears to be lacking the necessary",
"device incorporated. I've read \"[Writing G-Code: Audible Alert at end",
"it seems everything needed to implement audible alerts is built",
"Alert at end of print](https://3dprinting.stackexchange.com/questions/11056/writing-g-code-audible-alert-at-end-of-print)\" and it seems everything needed",
"but my rig appears to be lacking the necessary noise",
"built into the G-code syntax and firmware but my rig",
"and firmware but my rig appears to be lacking the",
"Audible Alert at end of print](https://3dprinting.stackexchange.com/questions/11056/writing-g-code-audible-alert-at-end-of-print)\" and it seems everything",
"does not appear to have any sound device incorporated. I've",
"of print](https://3dprinting.stackexchange.com/questions/11056/writing-g-code-audible-alert-at-end-of-print)\" and it seems everything needed to implement audible",
"alerts is built into the G-code syntax and firmware but",
"to have any sound device incorporated. I've read \"[Writing G-Code:",
"syntax and firmware but my rig appears to be lacking",
"Prusa i3 does not appear to have any sound device",
"and it seems everything needed to implement audible alerts is",
"My Prusa i3 does not appear to have any sound",
"not appear to have any sound device incorporated. I've read",
"needed to implement audible alerts is built into the G-code",
"is built into the G-code syntax and firmware but my",
"everything needed to implement audible alerts is built into the",
"G-Code: Audible Alert at end of print](https://3dprinting.stackexchange.com/questions/11056/writing-g-code-audible-alert-at-end-of-print)\" and it seems",
"\"[Writing G-Code: Audible Alert at end of print](https://3dprinting.stackexchange.com/questions/11056/writing-g-code-audible-alert-at-end-of-print)\" and it",
"audible alerts is built into the G-code syntax and firmware",
"into the G-code syntax and firmware but my rig appears",
"I've read \"[Writing G-Code: Audible Alert at end of print](https://3dprinting.stackexchange.com/questions/11056/writing-g-code-audible-alert-at-end-of-print)\"",
"end of print](https://3dprinting.stackexchange.com/questions/11056/writing-g-code-audible-alert-at-end-of-print)\" and it seems everything needed to implement",
"the G-code syntax and firmware but my rig appears to",
"read \"[Writing G-Code: Audible Alert at end of print](https://3dprinting.stackexchange.com/questions/11056/writing-g-code-audible-alert-at-end-of-print)\" and",
"G-code syntax and firmware but my rig appears to be",
"i3 does not appear to have any sound device incorporated.",
"sound device incorporated. I've read \"[Writing G-Code: Audible Alert at",
"print](https://3dprinting.stackexchange.com/questions/11056/writing-g-code-audible-alert-at-end-of-print)\" and it seems everything needed to implement audible alerts",
"implement audible alerts is built into the G-code syntax and",
"appear to have any sound device incorporated. I've read \"[Writing",
"any sound device incorporated. I've read \"[Writing G-Code: Audible Alert",
"incorporated. I've read \"[Writing G-Code: Audible Alert at end of",
"seems everything needed to implement audible alerts is built into"
] |
[
"that match my request when making a Google search? I'm",
"specific standard I can search for? How to filter out",
"Flashforge). Do these bobbins ( = 1 kg) rely on",
"out an enclosed 3D printer that allow to load the",
"I can \"easily\" put them out of the machine using",
"\"easily\" put them out of the machine using a custom",
"or Flashforge). Do these bobbins ( = 1 kg) rely",
"out of the machine using a custom support (or even",
"rely on a specific standard I can search for? How",
"to find out an enclosed 3D printer that allow to",
"3D printer that allow to load the common 1 kg",
"proprietary bobbins (like Dremel or Flashforge). Do these bobbins (",
"I can search for? How to filter out the printers",
"a Google search? I'm aware I can \"easily\" put them",
"for? How to filter out the printers that match my",
"aware I can \"easily\" put them out of the machine",
"my Dremel) but this partially nullifies the advantage of the",
"Dremel or Flashforge). Do these bobbins ( = 1 kg)",
"my request when making a Google search? I'm aware I",
"the common 1 kg filament bobbins. Most of the enclosed",
"that allow to load the common 1 kg filament bobbins.",
"( = 1 kg) rely on a specific standard I",
"How to filter out the printers that match my request",
"Do these bobbins ( = 1 kg) rely on a",
"1 kg) rely on a specific standard I can search",
"can \"easily\" put them out of the machine using a",
"of the machine using a custom support (or even directly",
"the machine using a custom support (or even directly in",
"directly in a dryer as I do for my Dremel)",
"a specific standard I can search for? How to filter",
"do for my Dremel) but this partially nullifies the advantage",
"printer that allow to load the common 1 kg filament",
"in a dryer as I do for my Dremel) but",
"accept only proprietary bobbins (like Dremel or Flashforge). Do these",
"common 1 kg filament bobbins. Most of the enclosed ones",
"match my request when making a Google search? I'm aware",
"I'm aware I can \"easily\" put them out of the",
"only proprietary bobbins (like Dremel or Flashforge). Do these bobbins",
"an enclosed 3D printer that allow to load the common",
"Google search? I'm aware I can \"easily\" put them out",
"dryer as I do for my Dremel) but this partially",
"the enclosed ones accept only proprietary bobbins (like Dremel or",
"a dryer as I do for my Dremel) but this",
"load the common 1 kg filament bobbins. Most of the",
"out the printers that match my request when making a",
"kg) rely on a specific standard I can search for?",
"when making a Google search? I'm aware I can \"easily\"",
"Dremel) but this partially nullifies the advantage of the enclosure.",
"them out of the machine using a custom support (or",
"put them out of the machine using a custom support",
"search for? How to filter out the printers that match",
"printers that match my request when making a Google search?",
"machine using a custom support (or even directly in a",
"search? I'm aware I can \"easily\" put them out of",
"making a Google search? I'm aware I can \"easily\" put",
"can search for? How to filter out the printers that",
"these bobbins ( = 1 kg) rely on a specific",
"ones accept only proprietary bobbins (like Dremel or Flashforge). Do",
"1 kg filament bobbins. Most of the enclosed ones accept",
"for my Dremel) but this partially nullifies the advantage of",
"struggling to find out an enclosed 3D printer that allow",
"to load the common 1 kg filament bobbins. Most of",
"custom support (or even directly in a dryer as I",
"enclosed ones accept only proprietary bobbins (like Dremel or Flashforge).",
"filter out the printers that match my request when making",
"on a specific standard I can search for? How to",
"the printers that match my request when making a Google",
"request when making a Google search? I'm aware I can",
"as I do for my Dremel) but this partially nullifies",
"bobbins ( = 1 kg) rely on a specific standard",
"I'm struggling to find out an enclosed 3D printer that",
"I do for my Dremel) but this partially nullifies the",
"even directly in a dryer as I do for my",
"bobbins. Most of the enclosed ones accept only proprietary bobbins",
"using a custom support (or even directly in a dryer",
"to filter out the printers that match my request when",
"bobbins (like Dremel or Flashforge). Do these bobbins ( =",
"kg filament bobbins. Most of the enclosed ones accept only",
"(like Dremel or Flashforge). Do these bobbins ( = 1",
"= 1 kg) rely on a specific standard I can",
"standard I can search for? How to filter out the",
"filament bobbins. Most of the enclosed ones accept only proprietary",
"(or even directly in a dryer as I do for",
"find out an enclosed 3D printer that allow to load",
"allow to load the common 1 kg filament bobbins. Most",
"support (or even directly in a dryer as I do",
"of the enclosed ones accept only proprietary bobbins (like Dremel",
"enclosed 3D printer that allow to load the common 1",
"a custom support (or even directly in a dryer as",
"Most of the enclosed ones accept only proprietary bobbins (like"
] |
[
"though it is designed to be flat. Other than this",
"could try to remove this \"bowing\" effect? [![Resin printed model",
"on an Anycubic Photon M3 Plus with Anycubic 3D Printing",
"Off time: 0.5 secs * Z lift height: 6 mm",
"model adherence to my print bed. As shown in the",
": 360 mm/sec * Z lift retract: 6 mm The",
"with a bowing effect](https://i.stack.imgur.com/VmF9H.jpg \"Resin printed model with a bowing",
"\"Resin printed model with a bowing effect\")](https://i.stack.imgur.com/VmF9H.jpg \"Resin printed model",
"shown in the attached photo, my model is pulled away",
"leaving it bowed even though it is designed to be",
"40 secs with the same results) * Normal layer height:",
"Normal layer height: 0.05 mm * Normal layer exposure: 2.5",
"Could anyone suggest what is wrong and what I could",
"effect? [![Resin printed model with a bowing effect](https://i.stack.imgur.com/VmF9H.jpg \"Resin printed",
"the sides leaving it bowed even though it is designed",
"it is designed to be flat. Other than this \"bowing\",",
"with the same results) * Normal layer height: 0.05 mm",
"mm * Normal layer exposure: 2.5 secs * Off time:",
"\"bowing\" effect? [![Resin printed model with a bowing effect](https://i.stack.imgur.com/VmF9H.jpg \"Resin",
"* Z lift speed : 360 mm/sec * Z lift",
"lift height: 6 mm * Z lift speed : 360",
"bed is aligned. Could anyone suggest what is wrong and",
"what I could try to remove this \"bowing\" effect? [![Resin",
"model with a bowing effect\")](https://i.stack.imgur.com/VmF9H.jpg \"Resin printed model with a",
"with a bowing effect\")](https://i.stack.imgur.com/VmF9H.jpg \"Resin printed model with a bowing",
"6 mm The bed is aligned. Could anyone suggest what",
"secs * Off time: 0.5 secs * Z lift height:",
"than this \"bowing\", the model is of good quality. The",
"exposure: 22 secs (also tried 30 secs and 40 secs",
"print bed. As shown in the attached photo, my model",
"the same results) * Normal layer height: 0.05 mm *",
"to remove this \"bowing\" effect? [![Resin printed model with a",
"The model is printed solid on an Anycubic Photon M3",
"model is pulled away at the sides leaving it bowed",
"bowing effect](https://i.stack.imgur.com/VmF9H.jpg \"Resin printed model with a bowing effect\")](https://i.stack.imgur.com/VmF9H.jpg \"Resin",
"solid on an Anycubic Photon M3 Plus with Anycubic 3D",
"even though it is designed to be flat. Other than",
"Other than this \"bowing\", the model is of good quality.",
"* Bottom layer exposure: 22 secs (also tried 30 secs",
"is of good quality. The model is printed solid on",
"flat. Other than this \"bowing\", the model is of good",
"is aligned. Could anyone suggest what is wrong and what",
"Anycubic Photon M3 Plus with Anycubic 3D Printing UV Sensitive",
"6 mm * Z lift speed : 360 mm/sec *",
"retract: 6 mm The bed is aligned. Could anyone suggest",
"model is of good quality. The model is printed solid",
"mm The bed is aligned. Could anyone suggest what is",
"having some trouble with model adherence to my print bed.",
"UV Sensitive Resin. My print settings are: * Bottom layer",
"layer count: 6 * Bottom layer exposure: 22 secs (also",
"I could try to remove this \"bowing\" effect? [![Resin printed",
"lift retract: 6 mm The bed is aligned. Could anyone",
"Z lift speed : 360 mm/sec * Z lift retract:",
"360 mm/sec * Z lift retract: 6 mm The bed",
"bowed even though it is designed to be flat. Other",
"layer height: 0.05 mm * Normal layer exposure: 2.5 secs",
"some trouble with model adherence to my print bed. As",
"this \"bowing\", the model is of good quality. The model",
"try to remove this \"bowing\" effect? [![Resin printed model with",
"count: 6 * Bottom layer exposure: 22 secs (also tried",
"secs (also tried 30 secs and 40 secs with the",
"printed model with a bowing effect\")](https://i.stack.imgur.com/VmF9H.jpg \"Resin printed model with",
"with model adherence to my print bed. As shown in",
"Photon M3 Plus with Anycubic 3D Printing UV Sensitive Resin.",
"mm * Z lift speed : 360 mm/sec * Z",
"suggest what is wrong and what I could try to",
"with Anycubic 3D Printing UV Sensitive Resin. My print settings",
"same results) * Normal layer height: 0.05 mm * Normal",
"away at the sides leaving it bowed even though it",
"settings are: * Bottom layer count: 6 * Bottom layer",
"printed solid on an Anycubic Photon M3 Plus with Anycubic",
"print settings are: * Bottom layer count: 6 * Bottom",
"is printed solid on an Anycubic Photon M3 Plus with",
"model is printed solid on an Anycubic Photon M3 Plus",
"the model is of good quality. The model is printed",
"and what I could try to remove this \"bowing\" effect?",
"Bottom layer count: 6 * Bottom layer exposure: 22 secs",
"at the sides leaving it bowed even though it is",
"secs with the same results) * Normal layer height: 0.05",
"time: 0.5 secs * Z lift height: 6 mm *",
"and 40 secs with the same results) * Normal layer",
"lift speed : 360 mm/sec * Z lift retract: 6",
"6 * Bottom layer exposure: 22 secs (also tried 30",
"an Anycubic Photon M3 Plus with Anycubic 3D Printing UV",
"Resin. My print settings are: * Bottom layer count: 6",
"layer exposure: 22 secs (also tried 30 secs and 40",
"a bowing effect\")](https://i.stack.imgur.com/VmF9H.jpg \"Resin printed model with a bowing effect\")",
"this \"bowing\" effect? [![Resin printed model with a bowing effect](https://i.stack.imgur.com/VmF9H.jpg",
"M3 Plus with Anycubic 3D Printing UV Sensitive Resin. My",
"* Normal layer exposure: 2.5 secs * Off time: 0.5",
"photo, my model is pulled away at the sides leaving",
"* Bottom layer count: 6 * Bottom layer exposure: 22",
"Z lift height: 6 mm * Z lift speed :",
"effect](https://i.stack.imgur.com/VmF9H.jpg \"Resin printed model with a bowing effect\")](https://i.stack.imgur.com/VmF9H.jpg \"Resin printed",
"height: 6 mm * Z lift speed : 360 mm/sec",
"adherence to my print bed. As shown in the attached",
"30 secs and 40 secs with the same results) *",
"quality. The model is printed solid on an Anycubic Photon",
"a bowing effect](https://i.stack.imgur.com/VmF9H.jpg \"Resin printed model with a bowing effect\")](https://i.stack.imgur.com/VmF9H.jpg",
"tried 30 secs and 40 secs with the same results)",
"printed model with a bowing effect](https://i.stack.imgur.com/VmF9H.jpg \"Resin printed model with",
"0.05 mm * Normal layer exposure: 2.5 secs * Off",
"exposure: 2.5 secs * Off time: 0.5 secs * Z",
"attached photo, my model is pulled away at the sides",
"\"bowing\", the model is of good quality. The model is",
"sides leaving it bowed even though it is designed to",
"trouble with model adherence to my print bed. As shown",
"(also tried 30 secs and 40 secs with the same",
"anyone suggest what is wrong and what I could try",
"Anycubic 3D Printing UV Sensitive Resin. My print settings are:",
"3D Printing UV Sensitive Resin. My print settings are: *",
"* Z lift height: 6 mm * Z lift speed",
"[![Resin printed model with a bowing effect](https://i.stack.imgur.com/VmF9H.jpg \"Resin printed model",
"My print settings are: * Bottom layer count: 6 *",
"remove this \"bowing\" effect? [![Resin printed model with a bowing",
"wrong and what I could try to remove this \"bowing\"",
"* Normal layer height: 0.05 mm * Normal layer exposure:",
"is pulled away at the sides leaving it bowed even",
"designed to be flat. Other than this \"bowing\", the model",
"bed. As shown in the attached photo, my model is",
"are: * Bottom layer count: 6 * Bottom layer exposure:",
"22 secs (also tried 30 secs and 40 secs with",
"Z lift retract: 6 mm The bed is aligned. Could",
"model with a bowing effect](https://i.stack.imgur.com/VmF9H.jpg \"Resin printed model with a",
"height: 0.05 mm * Normal layer exposure: 2.5 secs *",
"Sensitive Resin. My print settings are: * Bottom layer count:",
"Normal layer exposure: 2.5 secs * Off time: 0.5 secs",
"Plus with Anycubic 3D Printing UV Sensitive Resin. My print",
"my print bed. As shown in the attached photo, my",
"Printing UV Sensitive Resin. My print settings are: * Bottom",
"secs and 40 secs with the same results) * Normal",
"layer exposure: 2.5 secs * Off time: 0.5 secs *",
"of good quality. The model is printed solid on an",
"my model is pulled away at the sides leaving it",
"I am having some trouble with model adherence to my",
"am having some trouble with model adherence to my print",
"aligned. Could anyone suggest what is wrong and what I",
"As shown in the attached photo, my model is pulled",
"to my print bed. As shown in the attached photo,",
"what is wrong and what I could try to remove",
"2.5 secs * Off time: 0.5 secs * Z lift",
"it bowed even though it is designed to be flat.",
"speed : 360 mm/sec * Z lift retract: 6 mm",
"results) * Normal layer height: 0.05 mm * Normal layer",
"mm/sec * Z lift retract: 6 mm The bed is",
"the attached photo, my model is pulled away at the",
"in the attached photo, my model is pulled away at",
"Bottom layer exposure: 22 secs (also tried 30 secs and",
"* Z lift retract: 6 mm The bed is aligned.",
"pulled away at the sides leaving it bowed even though",
"be flat. Other than this \"bowing\", the model is of",
"secs * Z lift height: 6 mm * Z lift",
"to be flat. Other than this \"bowing\", the model is",
"* Off time: 0.5 secs * Z lift height: 6",
"0.5 secs * Z lift height: 6 mm * Z",
"The bed is aligned. Could anyone suggest what is wrong",
"is wrong and what I could try to remove this",
"is designed to be flat. Other than this \"bowing\", the",
"good quality. The model is printed solid on an Anycubic"
] |
[
"first few layers of a printed model with edges curling",
"a printed model with edges curling up\")](https://i.stack.imgur.com/EV75D.png \"Photo of the",
"but will often wander around in the 197 °C-202 °C",
"new to this, I got the printer 3 weeks ago.",
"often wander around in the 197 °C-202 °C range. There",
"it instantly dropped from 200 °C to 170 °C, then",
"(although the bottom isn't perfect either). This wasn't an issue",
"the top (printed last). A lot of edges are popping",
"a half hour into a print: ``` THERMAL RUNAWAY: E1",
"to 170 °C, then 180 °C, then 190 °C, then",
"this, I got the printer 3 weeks ago. Extensive googling",
"I got the printer 3 weeks ago. Extensive googling has",
"bedroom) for a 30-hour print. I had it running for",
"[![Photo of the first few layers of a printed model",
"170 °C, then 180 °C, then 190 °C, then chilbed",
"moved my printer to the basement (from my bedroom) for",
"running for ~14 hours straight before my first encounter with",
"info I've collected: The Extruder temp isn't consistent. It's set",
"instantly go from 200 °C to 190 °C, then climb",
"perfect either). This wasn't an issue until I moved my",
"adhere to the plate correctly. Some parts wouldn't stick: [![Photo",
"was at 190 °C. See, it seems to jump around",
"plastic wouldn't adhere to the plate correctly. Some parts wouldn't",
"few layers of a printed model with edges curling up\")](https://i.stack.imgur.com/EV75D.png",
"hours straight before my first encounter with this error. The",
"°C range. There are random severe spikes where it will",
"temperate difference between my room and the basement is minimal.",
"also leveled the bed before re-trying, which didn't solve the",
"bottom (printed first) to the top (printed last). A lot",
"layers of a printed model with edges curling up\")](https://i.stack.imgur.com/EV75D.png \"Photo",
"then 190 °C, then chilbed back up to 200 °C.",
"model with edges curling up](https://i.stack.imgur.com/EV75D.png \"Photo of the first few",
"my bedroom) for a 30-hour print. I had it running",
"About 5 minutes before error, it instantly dropped from 200",
"dropped from 200 °C to 170 °C, then 180 °C,",
"seems to jump around in an odd pattern, not just",
"concise description of the problem so others down the line",
"jumps were occurring, the plastic wouldn't adhere to the plate",
"get this error around a half hour into a print:",
"magnetic sheet for a glass bed. As the tin says,",
"isn't consistent. It's set to 200 °C (Cura default), but",
"post this hoping to find clarification for myself and provide",
"printed model with edges curling up\")](https://i.stack.imgur.com/EV75D.png \"Photo of the first",
"until I moved my printer to the basement (from my",
"my printer's temperature situation. I post this hoping to find",
"in when the extruder was at 190 °C. See, it",
"As the tin says, I'll get this error around a",
"the bottom (printed first) to the top (printed last). A",
"°C. See, it seems to jump around in an odd",
"it seems to jump around in an odd pattern, not",
"got the printer 3 weeks ago. Extensive googling has resulted",
"°C, then 180 °C, then 190 °C, then chilbed back",
"printer 3 weeks ago. Extensive googling has resulted in many",
"180 °C, then 190 °C, then chilbed back up to",
"\"Photo of the first few layers of a printed model",
"edges are popping up (although the bottom isn't perfect either).",
"googling has resulted in many different solutions, but none specific",
"°C. The error popped in when the extruder was at",
"when the extruder was at 190 °C. See, it seems",
"Compare the bottom (printed first) to the top (printed last).",
"situation. I post this hoping to find clarification for myself",
"HALTED Please Reset ``` I recorded it in the act,",
"up (although the bottom isn't perfect either). This wasn't an",
"There are random severe spikes where it will instantly go",
"to 205 °C. About 5 minutes before error, it instantly",
"(Cura default), but will often wander around in the 197",
"so others down the line can find the solution easier.",
"last). A lot of edges are popping up (although the",
"before re-trying, which didn't solve the issue. I am new",
"had it running for ~14 hours straight before my first",
"printer to the basement (from my bedroom) for a 30-hour",
"provide a concise description of the problem so others down",
"correctly. Some parts wouldn't stick: [![Photo of the first few",
"sheet for a glass bed. As the tin says, I'll",
"will instantly go from 200 °C to 190 °C, then",
"it in the act, and here's some info I've collected:",
"190 °C, then climb up to 205 °C. About 5",
"the tin says, I'll get this error around a half",
"model with edges curling up\") Compare the bottom (printed first)",
"the printer 3 weeks ago. Extensive googling has resulted in",
"transitioning to a lower temperature. This leads me to suspect",
"I had it running for ~14 hours straight before my",
"default), but will often wander around in the 197 °C-202",
"``` THERMAL RUNAWAY: E1 PRINTER HALTED Please Reset ``` I",
"a lower temperature. This leads me to suspect it's a",
"leads me to suspect it's a sensor issue. *However*, around",
"odd pattern, not just smoothly transitioning to a lower temperature.",
"not just smoothly transitioning to a lower temperature. This leads",
"to 200 °C. The error popped in when the extruder",
"layers of a printed model with edges curling up](https://i.stack.imgur.com/EV75D.png \"Photo",
"either). This wasn't an issue until I moved my printer",
"range. There are random severe spikes where it will instantly",
"says, I'll get this error around a half hour into",
"ago. Extensive googling has resulted in many different solutions, but",
"from 200 °C to 170 °C, then 180 °C, then",
"This leads me to suspect it's a sensor issue. *However*,",
"°C, then chilbed back up to 200 °C. The error",
"the basement is minimal. I also leveled the bed before",
"around a half hour into a print: ``` THERMAL RUNAWAY:",
"error popped in when the extruder was at 190 °C.",
"encounter with this error. The temperate difference between my room",
"recorded it in the act, and here's some info I've",
"smoothly transitioning to a lower temperature. This leads me to",
"(printed first) to the top (printed last). A lot of",
"A lot of edges are popping up (although the bottom",
"The Extruder temp isn't consistent. It's set to 200 °C",
"it's a sensor issue. *However*, around the time these jumps",
"in an odd pattern, not just smoothly transitioning to a",
"specific to my printer's temperature situation. I post this hoping",
"a glass bed. As the tin says, I'll get this",
"edges curling up\") Compare the bottom (printed first) to the",
"stick: [![Photo of the first few layers of a printed",
"didn't solve the issue. I am new to this, I",
"lot of edges are popping up (although the bottom isn't",
"glass bed. As the tin says, I'll get this error",
"it will instantly go from 200 °C to 190 °C,",
"wouldn't stick: [![Photo of the first few layers of a",
"error, it instantly dropped from 200 °C to 170 °C,",
"print. I had it running for ~14 hours straight before",
"200 °C (Cura default), but will often wander around in",
"then climb up to 205 °C. About 5 minutes before",
"of a printed model with edges curling up\") Compare the",
"where it will instantly go from 200 °C to 190",
"the first few layers of a printed model with edges",
"°C (Cura default), but will often wander around in the",
"myself and provide a concise description of the problem so",
"the plate correctly. Some parts wouldn't stick: [![Photo of the",
"of a printed model with edges curling up\")](https://i.stack.imgur.com/EV75D.png \"Photo of",
"half hour into a print: ``` THERMAL RUNAWAY: E1 PRINTER",
"issue. *However*, around the time these jumps were occurring, the",
"up](https://i.stack.imgur.com/EV75D.png \"Photo of the first few layers of a printed",
"PRINTER HALTED Please Reset ``` I recorded it in the",
"description of the problem so others down the line can",
"this error. The temperate difference between my room and the",
"a concise description of the problem so others down the",
"tin says, I'll get this error around a half hour",
"printer's temperature situation. I post this hoping to find clarification",
"Some parts wouldn't stick: [![Photo of the first few layers",
"°C to 190 °C, then climb up to 205 °C.",
"to find clarification for myself and provide a concise description",
"a print: ``` THERMAL RUNAWAY: E1 PRINTER HALTED Please Reset",
"the extruder was at 190 °C. See, it seems to",
"the 197 °C-202 °C range. There are random severe spikes",
"this error around a half hour into a print: ```",
"occurring, the plastic wouldn't adhere to the plate correctly. Some",
"the issue. I am new to this, I got the",
"with edges curling up\")](https://i.stack.imgur.com/EV75D.png \"Photo of the first few layers",
"at 190 °C. See, it seems to jump around in",
"This wasn't an issue until I moved my printer to",
"for a glass bed. As the tin says, I'll get",
"Extensive googling has resulted in many different solutions, but none",
"and provide a concise description of the problem so others",
"spikes where it will instantly go from 200 °C to",
"RUNAWAY: E1 PRINTER HALTED Please Reset ``` I recorded it",
"The temperate difference between my room and the basement is",
"bed. As the tin says, I'll get this error around",
"a printed model with edges curling up\") Compare the bottom",
"the problem so others down the line can find the",
"around in an odd pattern, not just smoothly transitioning to",
"is stock except that I swapped the magnetic sheet for",
"clarification for myself and provide a concise description of the",
"few layers of a printed model with edges curling up](https://i.stack.imgur.com/EV75D.png",
"to my printer's temperature situation. I post this hoping to",
"190 °C, then chilbed back up to 200 °C. The",
"re-trying, which didn't solve the issue. I am new to",
"solutions, but none specific to my printer's temperature situation. I",
"to jump around in an odd pattern, not just smoothly",
"I swapped the magnetic sheet for a glass bed. As",
"in the act, and here's some info I've collected: The",
"between my room and the basement is minimal. I also",
"3 Pro, everything is stock except that I swapped the",
"basement (from my bedroom) for a 30-hour print. I had",
"layers of a printed model with edges curling up\") Compare",
"hoping to find clarification for myself and provide a concise",
"hour into a print: ``` THERMAL RUNAWAY: E1 PRINTER HALTED",
"°C, then climb up to 205 °C. About 5 minutes",
"I recorded it in the act, and here's some info",
"print: ``` THERMAL RUNAWAY: E1 PRINTER HALTED Please Reset ```",
"top (printed last). A lot of edges are popping up",
"before my first encounter with this error. The temperate difference",
"Please Reset ``` I recorded it in the act, and",
"instantly dropped from 200 °C to 170 °C, then 180",
"the time these jumps were occurring, the plastic wouldn't adhere",
"random severe spikes where it will instantly go from 200",
"some info I've collected: The Extruder temp isn't consistent. It's",
"then chilbed back up to 200 °C. The error popped",
"severe spikes where it will instantly go from 200 °C",
"extruder was at 190 °C. See, it seems to jump",
"up to 200 °C. The error popped in when the",
"temperature. This leads me to suspect it's a sensor issue.",
"a 30-hour print. I had it running for ~14 hours",
"set to 200 °C (Cura default), but will often wander",
"5 minutes before error, it instantly dropped from 200 °C",
"isn't perfect either). This wasn't an issue until I moved",
"a sensor issue. *However*, around the time these jumps were",
"the basement (from my bedroom) for a 30-hour print. I",
"error around a half hour into a print: ``` THERMAL",
"chilbed back up to 200 °C. The error popped in",
"curling up\") Compare the bottom (printed first) to the top",
"Pro, everything is stock except that I swapped the magnetic",
"are random severe spikes where it will instantly go from",
"Reset ``` I recorded it in the act, and here's",
"°C to 170 °C, then 180 °C, then 190 °C,",
"to this, I got the printer 3 weeks ago. Extensive",
"of the problem so others down the line can find",
"to the plate correctly. Some parts wouldn't stick: [![Photo of",
"is minimal. I also leveled the bed before re-trying, which",
"for ~14 hours straight before my first encounter with this",
"See, it seems to jump around in an odd pattern,",
"room and the basement is minimal. I also leveled the",
"into a print: ``` THERMAL RUNAWAY: E1 PRINTER HALTED Please",
"then 180 °C, then 190 °C, then chilbed back up",
"(printed last). A lot of edges are popping up (although",
"will often wander around in the 197 °C-202 °C range.",
"back up to 200 °C. The error popped in when",
"wasn't an issue until I moved my printer to the",
"(from my bedroom) for a 30-hour print. I had it",
"for myself and provide a concise description of the problem",
"find clarification for myself and provide a concise description of",
"to the basement (from my bedroom) for a 30-hour print.",
"Ender 3 Pro, everything is stock except that I swapped",
"different solutions, but none specific to my printer's temperature situation.",
"temp isn't consistent. It's set to 200 °C (Cura default),",
"of the first few layers of a printed model with",
"go from 200 °C to 190 °C, then climb up",
"plate correctly. Some parts wouldn't stick: [![Photo of the first",
"has resulted in many different solutions, but none specific to",
"The error popped in when the extruder was at 190",
"up to 205 °C. About 5 minutes before error, it",
"up\")](https://i.stack.imgur.com/EV75D.png \"Photo of the first few layers of a printed",
"edges curling up\")](https://i.stack.imgur.com/EV75D.png \"Photo of the first few layers of",
"``` I recorded it in the act, and here's some",
"time these jumps were occurring, the plastic wouldn't adhere to",
"my first encounter with this error. The temperate difference between",
"bed before re-trying, which didn't solve the issue. I am",
"which didn't solve the issue. I am new to this,",
"It's set to 200 °C (Cura default), but will often",
"THERMAL RUNAWAY: E1 PRINTER HALTED Please Reset ``` I recorded",
"197 °C-202 °C range. There are random severe spikes where",
"the act, and here's some info I've collected: The Extruder",
"the magnetic sheet for a glass bed. As the tin",
"the bed before re-trying, which didn't solve the issue. I",
"issue. I am new to this, I got the printer",
"to 200 °C (Cura default), but will often wander around",
"the bottom isn't perfect either). This wasn't an issue until",
"*However*, around the time these jumps were occurring, the plastic",
"except that I swapped the magnetic sheet for a glass",
"sensor issue. *However*, around the time these jumps were occurring,",
"before error, it instantly dropped from 200 °C to 170",
"curling up\")](https://i.stack.imgur.com/EV75D.png \"Photo of the first few layers of a",
"3 weeks ago. Extensive googling has resulted in many different",
"I post this hoping to find clarification for myself and",
"climb up to 205 °C. About 5 minutes before error,",
"to suspect it's a sensor issue. *However*, around the time",
"of a printed model with edges curling up](https://i.stack.imgur.com/EV75D.png \"Photo of",
"were occurring, the plastic wouldn't adhere to the plate correctly.",
"~14 hours straight before my first encounter with this error.",
"collected: The Extruder temp isn't consistent. It's set to 200",
"none specific to my printer's temperature situation. I post this",
"bottom isn't perfect either). This wasn't an issue until I",
"resulted in many different solutions, but none specific to my",
"in many different solutions, but none specific to my printer's",
"leveled the bed before re-trying, which didn't solve the issue.",
"with this error. The temperate difference between my room and",
"I've collected: The Extruder temp isn't consistent. It's set to",
"it running for ~14 hours straight before my first encounter",
"problem so others down the line can find the solution",
"an odd pattern, not just smoothly transitioning to a lower",
"model with edges curling up\")](https://i.stack.imgur.com/EV75D.png \"Photo of the first few",
"suspect it's a sensor issue. *However*, around the time these",
"first encounter with this error. The temperate difference between my",
"wander around in the 197 °C-202 °C range. There are",
"these jumps were occurring, the plastic wouldn't adhere to the",
"parts wouldn't stick: [![Photo of the first few layers of",
"to the top (printed last). A lot of edges are",
"here's some info I've collected: The Extruder temp isn't consistent.",
"around the time these jumps were occurring, the plastic wouldn't",
"and here's some info I've collected: The Extruder temp isn't",
"minimal. I also leveled the bed before re-trying, which didn't",
"temperature situation. I post this hoping to find clarification for",
"I am new to this, I got the printer 3",
"200 °C to 170 °C, then 180 °C, then 190",
"and the basement is minimal. I also leveled the bed",
"weeks ago. Extensive googling has resulted in many different solutions,",
"200 °C to 190 °C, then climb up to 205",
"this hoping to find clarification for myself and provide a",
"stock except that I swapped the magnetic sheet for a",
"consistent. It's set to 200 °C (Cura default), but will",
"many different solutions, but none specific to my printer's temperature",
"to 190 °C, then climb up to 205 °C. About",
"are popping up (although the bottom isn't perfect either). This",
"printed model with edges curling up](https://i.stack.imgur.com/EV75D.png \"Photo of the first",
"around in the 197 °C-202 °C range. There are random",
"but none specific to my printer's temperature situation. I post",
"from 200 °C to 190 °C, then climb up to",
"I also leveled the bed before re-trying, which didn't solve",
"to a lower temperature. This leads me to suspect it's",
"that I swapped the magnetic sheet for a glass bed.",
"wouldn't adhere to the plate correctly. Some parts wouldn't stick:",
"205 °C. About 5 minutes before error, it instantly dropped",
"of edges are popping up (although the bottom isn't perfect",
"the plastic wouldn't adhere to the plate correctly. Some parts",
"popped in when the extruder was at 190 °C. See,",
"with edges curling up](https://i.stack.imgur.com/EV75D.png \"Photo of the first few layers",
"30-hour print. I had it running for ~14 hours straight",
"in the 197 °C-202 °C range. There are random severe",
"my room and the basement is minimal. I also leveled",
"act, and here's some info I've collected: The Extruder temp",
"jump around in an odd pattern, not just smoothly transitioning",
"°C, then 190 °C, then chilbed back up to 200",
"difference between my room and the basement is minimal. I",
"printed model with edges curling up\") Compare the bottom (printed",
"swapped the magnetic sheet for a glass bed. As the",
"just smoothly transitioning to a lower temperature. This leads me",
"lower temperature. This leads me to suspect it's a sensor",
"for a 30-hour print. I had it running for ~14",
"me to suspect it's a sensor issue. *However*, around the",
"200 °C. The error popped in when the extruder was",
"am new to this, I got the printer 3 weeks",
"my printer to the basement (from my bedroom) for a",
"°C-202 °C range. There are random severe spikes where it",
"with edges curling up\") Compare the bottom (printed first) to",
"curling up](https://i.stack.imgur.com/EV75D.png \"Photo of the first few layers of a",
"pattern, not just smoothly transitioning to a lower temperature. This",
"I moved my printer to the basement (from my bedroom)",
"°C. About 5 minutes before error, it instantly dropped from",
"solve the issue. I am new to this, I got",
"minutes before error, it instantly dropped from 200 °C to",
"190 °C. See, it seems to jump around in an",
"first) to the top (printed last). A lot of edges",
"popping up (although the bottom isn't perfect either). This wasn't",
"Extruder temp isn't consistent. It's set to 200 °C (Cura",
"I'll get this error around a half hour into a",
"basement is minimal. I also leveled the bed before re-trying,",
"an issue until I moved my printer to the basement",
"edges curling up](https://i.stack.imgur.com/EV75D.png \"Photo of the first few layers of",
"few layers of a printed model with edges curling up\")",
"up\") Compare the bottom (printed first) to the top (printed",
"straight before my first encounter with this error. The temperate",
"everything is stock except that I swapped the magnetic sheet",
"issue until I moved my printer to the basement (from",
"a printed model with edges curling up](https://i.stack.imgur.com/EV75D.png \"Photo of the",
"E1 PRINTER HALTED Please Reset ``` I recorded it in",
"error. The temperate difference between my room and the basement"
] |
[
"Bed Z. Does anyone have any idea how to store",
"LCD) I adjust the babystep Z while printing to get",
"offset option in the LCD menu. The only similar setting",
"in the LCD menu. The only similar setting I can",
"menu. The only similar setting I can find is (only",
"see changes in Z height but not with Bed Z.",
"Z height but not with Bed Z. Does anyone have",
"while printing) **Tune** > **Bed Z** but this setting doesn´t",
"value through Pronterface? PS: I recently started 3D printing, I",
"clearly see changes in Z height but not with Bed",
"corners of the bed and doing a manual mesh bed",
"affect anything. If I adjust babystep Z I can clearly",
"I adjust babystep Z I can clearly see changes in",
"how to store the babystep Z value? (I´ve already tried",
"leveling the corners of the bed and doing a manual",
"started 3D printing, I know how to send commands through",
"the Pronterface terminal, but haven´t learned how to modify firmware",
"Settings** option but that doesn´t work) Or maybe how to",
"layer. Ideally, I would take note of the optimal babystep",
"that doesn´t work) Or maybe how to store my Z",
"and store it as Z offset, but there´s no Z",
"to send commands through the Pronterface terminal, but haven´t learned",
"the optimal babystep Z value and store it as Z",
"tried adjusting the babystep Z and then selecting the **Store",
"mesh bed leveling (both options on the menu LCD) I",
"only similar setting I can find is (only while printing)",
"I know how to send commands through the Pronterface terminal,",
"the babystep Z value? (I´ve already tried adjusting the babystep",
"get a perfect first layer. Ideally, I would take note",
"Pronterface terminal, but haven´t learned how to modify firmware yet.",
"as Z offset, but there´s no Z offset option in",
"bed and doing a manual mesh bed leveling (both options",
"I can find is (only while printing) **Tune** > **Bed",
"Z offset option in the LCD menu. The only similar",
"I can clearly see changes in Z height but not",
"similar setting I can find is (only while printing) **Tune**",
"then selecting the **Store Settings** option but that doesn´t work)",
"selecting the **Store Settings** option but that doesn´t work) Or",
"**Bed Z** but this setting doesn´t affect anything. If I",
"the babystep Z while printing to get a perfect first",
"value? (I´ve already tried adjusting the babystep Z and then",
"babystep Z and then selecting the **Store Settings** option but",
"adjusting the babystep Z and then selecting the **Store Settings**",
"doesn´t affect anything. If I adjust babystep Z I can",
"through the Pronterface terminal, but haven´t learned how to modify",
"with Bed Z. Does anyone have any idea how to",
"3D printing, I know how to send commands through the",
"and doing a manual mesh bed leveling (both options on",
"idea how to store the babystep Z value? (I´ve already",
"store the babystep Z value? (I´ve already tried adjusting the",
"(both options on the menu LCD) I adjust the babystep",
"commands through the Pronterface terminal, but haven´t learned how to",
"setting I can find is (only while printing) **Tune** >",
"Does anyone have any idea how to store the babystep",
"babystep Z value? (I´ve already tried adjusting the babystep Z",
"to store my Z offset value through Pronterface? PS: I",
"to store the babystep Z value? (I´ve already tried adjusting",
"through Pronterface? PS: I recently started 3D printing, I know",
"doing a manual mesh bed leveling (both options on the",
"would take note of the optimal babystep Z value and",
"option but that doesn´t work) Or maybe how to store",
"After leveling the corners of the bed and doing a",
"there´s no Z offset option in the LCD menu. The",
"perfect first layer. Ideally, I would take note of the",
"anything. If I adjust babystep Z I can clearly see",
"Z and then selecting the **Store Settings** option but that",
"> **Bed Z** but this setting doesn´t affect anything. If",
"a perfect first layer. Ideally, I would take note of",
"optimal babystep Z value and store it as Z offset,",
"a manual mesh bed leveling (both options on the menu",
"have any idea how to store the babystep Z value?",
"adjust the babystep Z while printing to get a perfect",
"If I adjust babystep Z I can clearly see changes",
"option in the LCD menu. The only similar setting I",
"of the bed and doing a manual mesh bed leveling",
"printing, I know how to send commands through the Pronterface",
"babystep Z value and store it as Z offset, but",
"note of the optimal babystep Z value and store it",
"(I´ve already tried adjusting the babystep Z and then selecting",
"while printing to get a perfect first layer. Ideally, I",
"in Z height but not with Bed Z. Does anyone",
"already tried adjusting the babystep Z and then selecting the",
"no Z offset option in the LCD menu. The only",
"maybe how to store my Z offset value through Pronterface?",
"LCD menu. The only similar setting I can find is",
"printing to get a perfect first layer. Ideally, I would",
"PS: I recently started 3D printing, I know how to",
"offset, but there´s no Z offset option in the LCD",
"Z I can clearly see changes in Z height but",
"it as Z offset, but there´s no Z offset option",
"babystep Z I can clearly see changes in Z height",
"options on the menu LCD) I adjust the babystep Z",
"work) Or maybe how to store my Z offset value",
"this setting doesn´t affect anything. If I adjust babystep Z",
"any idea how to store the babystep Z value? (I´ve",
"can find is (only while printing) **Tune** > **Bed Z**",
"first layer. Ideally, I would take note of the optimal",
"store it as Z offset, but there´s no Z offset",
"my Z offset value through Pronterface? PS: I recently started",
"to get a perfect first layer. Ideally, I would take",
"printing) **Tune** > **Bed Z** but this setting doesn´t affect",
"send commands through the Pronterface terminal, but haven´t learned how",
"the bed and doing a manual mesh bed leveling (both",
"take note of the optimal babystep Z value and store",
"the LCD menu. The only similar setting I can find",
"the menu LCD) I adjust the babystep Z while printing",
"setting doesn´t affect anything. If I adjust babystep Z I",
"on the menu LCD) I adjust the babystep Z while",
"Z value? (I´ve already tried adjusting the babystep Z and",
"the babystep Z and then selecting the **Store Settings** option",
"adjust babystep Z I can clearly see changes in Z",
"and then selecting the **Store Settings** option but that doesn´t",
"Ideally, I would take note of the optimal babystep Z",
"menu LCD) I adjust the babystep Z while printing to",
"babystep Z while printing to get a perfect first layer.",
"manual mesh bed leveling (both options on the menu LCD)",
"doesn´t work) Or maybe how to store my Z offset",
"bed leveling (both options on the menu LCD) I adjust",
"but this setting doesn´t affect anything. If I adjust babystep",
"value and store it as Z offset, but there´s no",
"**Tune** > **Bed Z** but this setting doesn´t affect anything.",
"I adjust the babystep Z while printing to get a",
"offset value through Pronterface? PS: I recently started 3D printing,",
"changes in Z height but not with Bed Z. Does",
"Or maybe how to store my Z offset value through",
"how to store my Z offset value through Pronterface? PS:",
"I would take note of the optimal babystep Z value",
"but there´s no Z offset option in the LCD menu.",
"(only while printing) **Tune** > **Bed Z** but this setting",
"Z. Does anyone have any idea how to store the",
"of the optimal babystep Z value and store it as",
"Pronterface? PS: I recently started 3D printing, I know how",
"but not with Bed Z. Does anyone have any idea",
"recently started 3D printing, I know how to send commands",
"Z while printing to get a perfect first layer. Ideally,",
"Z offset, but there´s no Z offset option in the",
"is (only while printing) **Tune** > **Bed Z** but this",
"**Store Settings** option but that doesn´t work) Or maybe how",
"anyone have any idea how to store the babystep Z",
"how to send commands through the Pronterface terminal, but haven´t",
"I recently started 3D printing, I know how to send",
"but that doesn´t work) Or maybe how to store my",
"know how to send commands through the Pronterface terminal, but",
"height but not with Bed Z. Does anyone have any",
"find is (only while printing) **Tune** > **Bed Z** but",
"Z offset value through Pronterface? PS: I recently started 3D",
"The only similar setting I can find is (only while",
"leveling (both options on the menu LCD) I adjust the",
"store my Z offset value through Pronterface? PS: I recently",
"Z value and store it as Z offset, but there´s",
"can clearly see changes in Z height but not with",
"not with Bed Z. Does anyone have any idea how",
"Z** but this setting doesn´t affect anything. If I adjust",
"the **Store Settings** option but that doesn´t work) Or maybe",
"the corners of the bed and doing a manual mesh"
] |
[
"preview for a 3D model\")](https://i.stack.imgur.com/H0zNf.jpg \"Screenshot of the Cura preview",
"preview for a 3D model\") I have tried it 3",
"At this point, I had to stop the print process.",
"of the Travel and Build Plate Adhesion settings in Cura\")",
"curled up](https://i.stack.imgur.com/SoZMu.png \"Photo of the printed model on the build",
"case? These are my print settings; bed temperature is 80",
"following model on my Kobra Max using ABS. I have",
"Adhesion settings in Cura\")](https://i.stack.imgur.com/7EaSA.png \"Screenshot of the Travel and Build",
"Max using ABS. I have uploaded it [here](https://drive.google.com/file/d/1XMasuTVzg3MCHDd3Txi7sb-pUqEzPtE0/view?usp=sharing). [![Screenshot of",
"to stop the print process. The element which broke free",
"you can see, one part managed to break free from",
"What could I do in this case? These are my",
"plate with corners curled up\")](https://i.stack.imgur.com/SoZMu.png \"Photo of the printed model",
"a 3D model](https://i.stack.imgur.com/H0zNf.jpg \"Screenshot of the Cura preview for a",
"it 3 times now, it always results in this: [![Photo",
"on the build plate with corners curled up\") As you",
"with corners curled up](https://i.stack.imgur.com/SoZMu.png \"Photo of the printed model on",
"on the build plate with corners curled up](https://i.stack.imgur.com/SoZMu.png \"Photo of",
"strong will to bend. What could I do in this",
"do in this case? These are my print settings; bed",
"temperature is 80 °C, and nozzle temperature is 195 °C.",
"the build plate with corners curled up\")](https://i.stack.imgur.com/SoZMu.png \"Photo of the",
"to break free from the support and warped upwards. At",
"temperature is 195 °C. [![Screenshot of the Travel and Build",
"of the Travel and Build Plate Adhesion settings in Cura](https://i.stack.imgur.com/7EaSA.png",
"the Cura preview for a 3D model\")](https://i.stack.imgur.com/H0zNf.jpg \"Screenshot of the",
"the build plate with corners curled up](https://i.stack.imgur.com/SoZMu.png \"Photo of the",
"break free from the support and warped upwards. At this",
"is 80 °C, and nozzle temperature is 195 °C. [. [![Screenshot of the Cura preview for a",
"print settings; bed temperature is 80 °C, and nozzle temperature",
"the following model on my Kobra Max using ABS. I",
"up\")](https://i.stack.imgur.com/SoZMu.png \"Photo of the printed model on the build plate",
"with corners curled up\") As you can see, one part",
"model\") I have tried it 3 times now, it always",
"195 °C. [![Screenshot of the Travel and Build Plate Adhesion",
"print process. The element which broke free really has a",
"want to print the following model on my Kobra Max",
"model on the build plate with corners curled up](https://i.stack.imgur.com/SoZMu.png \"Photo",
"in this: [![Photo of the printed model on the build",
"on the build plate with corners curled up\")](https://i.stack.imgur.com/SoZMu.png \"Photo of",
"build plate with corners curled up](https://i.stack.imgur.com/SoZMu.png \"Photo of the printed",
"\"Photo of the printed model on the build plate with",
"bend. What could I do in this case? These are",
"I have tried it 3 times now, it always results",
"from the support and warped upwards. At this point, I",
"corners curled up\")](https://i.stack.imgur.com/SoZMu.png \"Photo of the printed model on the",
"a 3D model\")](https://i.stack.imgur.com/H0zNf.jpg \"Screenshot of the Cura preview for a",
"the printed model on the build plate with corners curled",
"are my print settings; bed temperature is 80 °C, and",
"will to bend. What could I do in this case?",
"Adhesion settings in Cura](https://i.stack.imgur.com/7EaSA.png \"Screenshot of the Travel and Build",
"in Cura](https://i.stack.imgur.com/7EaSA.png \"Screenshot of the Travel and Build Plate Adhesion",
"support and warped upwards. At this point, I had to",
"the support and warped upwards. At this point, I had",
"model on my Kobra Max using ABS. I have uploaded",
"in Cura\")](https://i.stack.imgur.com/7EaSA.png \"Screenshot of the Travel and Build Plate Adhesion",
"Cura\")](https://i.stack.imgur.com/7EaSA.png \"Screenshot of the Travel and Build Plate Adhesion settings",
"the Cura preview for a 3D model\") I have tried",
"[here](https://drive.google.com/file/d/1XMasuTVzg3MCHDd3Txi7sb-pUqEzPtE0/view?usp=sharing). [![Screenshot of the Cura preview for a 3D model](https://i.stack.imgur.com/H0zNf.jpg",
"of the Cura preview for a 3D model\") I have",
"of the Cura preview for a 3D model\")](https://i.stack.imgur.com/H0zNf.jpg \"Screenshot of",
"I have uploaded it [here](https://drive.google.com/file/d/1XMasuTVzg3MCHDd3Txi7sb-pUqEzPtE0/view?usp=sharing). [![Screenshot of the Cura preview",
"have tried it 3 times now, it always results in",
"I had to stop the print process. The element which",
"managed to break free from the support and warped upwards.",
"up](https://i.stack.imgur.com/SoZMu.png \"Photo of the printed model on the build plate",
"to print the following model on my Kobra Max using",
"build plate with corners curled up\")](https://i.stack.imgur.com/SoZMu.png \"Photo of the printed",
"model on the build plate with corners curled up\") As",
"\"Screenshot of the Cura preview for a 3D model\")](https://i.stack.imgur.com/H0zNf.jpg \"Screenshot",
"Build Plate Adhesion settings in Cura](https://i.stack.imgur.com/7EaSA.png \"Screenshot of the Travel",
"really has a strong will to bend. What could I",
"These are my print settings; bed temperature is 80 °C,",
"a 3D model\") I have tried it 3 times now,",
"curled up\")](https://i.stack.imgur.com/SoZMu.png \"Photo of the printed model on the build",
"the print process. The element which broke free really has",
"had to stop the print process. The element which broke",
"results in this: [. [![Screenshot of the Cura preview for",
"this point, I had to stop the print process. The",
"model](https://i.stack.imgur.com/H0zNf.jpg \"Screenshot of the Cura preview for a 3D model\")](https://i.stack.imgur.com/H0zNf.jpg",
"up\") As you can see, one part managed to break",
"Build Plate Adhesion settings in Cura\")](https://i.stack.imgur.com/7EaSA.png \"Screenshot of the Travel",
"free from the support and warped upwards. At this point,",
"for a 3D model\") I have tried it 3 times",
"for a 3D model\")](https://i.stack.imgur.com/H0zNf.jpg \"Screenshot of the Cura preview for",
"point, I had to stop the print process. The element",
"Travel and Build Plate Adhesion settings in Cura\")](https://i.stack.imgur.com/7EaSA.png \"Screenshot of",
"settings; bed temperature is 80 °C, and nozzle temperature is",
"on my Kobra Max using ABS. I have uploaded it",
"plate with corners curled up\") As you can see, one",
"Cura](https://i.stack.imgur.com/7EaSA.png \"Screenshot of the Travel and Build Plate Adhesion settings",
"with corners curled up\")](https://i.stack.imgur.com/SoZMu.png \"Photo of the printed model on",
"The element which broke free really has a strong will",
"Cura preview for a 3D model](https://i.stack.imgur.com/H0zNf.jpg \"Screenshot of the Cura",
"3D model\") I have tried it 3 times now, it",
"times now, it always results in this: [![Photo of the",
"of the Cura preview for a 3D model](https://i.stack.imgur.com/H0zNf.jpg \"Screenshot of",
"corners curled up](https://i.stack.imgur.com/SoZMu.png \"Photo of the printed model on the",
"of the printed model on the build plate with corners",
"can see, one part managed to break free from the",
"°C, and nozzle temperature is 195 °C. [![Screenshot of the",
"of the Travel and Build Plate Adhesion settings in Cura\")](https://i.stack.imgur.com/7EaSA.png",
"printed model on the build plate with corners curled up\")](https://i.stack.imgur.com/SoZMu.png",
"part managed to break free from the support and warped",
"°C. [![Screenshot of the Travel and Build Plate Adhesion settings",
"3D model](https://i.stack.imgur.com/H0zNf.jpg \"Screenshot of the Cura preview for a 3D",
"is 195 °C. [![Screenshot of the Travel and Build Plate",
"print the following model on my Kobra Max using ABS.",
"warped upwards. At this point, I had to stop the",
"settings in Cura\")](https://i.stack.imgur.com/7EaSA.png \"Screenshot of the Travel and Build Plate",
"now, it always results in this: [![Photo of the printed",
"the Travel and Build Plate Adhesion settings in Cura](https://i.stack.imgur.com/7EaSA.png \"Screenshot",
"corners curled up\") As you can see, one part managed",
"could I do in this case? These are my print",
"bed temperature is 80 °C, and nozzle temperature is 195",
"Cura preview for a 3D model\") I have tried it",
"for a 3D model](https://i.stack.imgur.com/H0zNf.jpg \"Screenshot of the Cura preview for",
"free really has a strong will to bend. What could",
"element which broke free really has a strong will to",
"printed model on the build plate with corners curled up](https://i.stack.imgur.com/SoZMu.png",
"this: [. [![Screenshot of the Cura preview for a 3D",
"Plate Adhesion settings in Cura](https://i.stack.imgur.com/7EaSA.png \"Screenshot of the Travel and",
"I do in this case? These are my print settings;",
"80 °C, and nozzle temperature is 195 °C. [![Screenshot of",
"As you can see, one part managed to break free",
"model on the build plate with corners curled up\")](https://i.stack.imgur.com/SoZMu.png \"Photo",
"the Travel and Build Plate Adhesion settings in Cura\")](https://i.stack.imgur.com/7EaSA.png \"Screenshot",
"see, one part managed to break free from the support",
"it always results in this: [![Photo of the printed model",
"to bend. What could I do in this case? These",
"[![Screenshot of the Cura preview for a 3D model](https://i.stack.imgur.com/H0zNf.jpg \"Screenshot",
"the build plate with corners curled up\") As you can",
"build plate with corners curled up\") As you can see,",
"\"Screenshot of the Cura preview for a 3D model\") I",
"has a strong will to bend. What could I do",
"Travel and Build Plate Adhesion settings in Cura](https://i.stack.imgur.com/7EaSA.png \"Screenshot of",
"upwards. At this point, I had to stop the print",
"3D model\")](https://i.stack.imgur.com/H0zNf.jpg \"Screenshot of the Cura preview for a 3D",
"using ABS. I have uploaded it [here](https://drive.google.com/file/d/1XMasuTVzg3MCHDd3Txi7sb-pUqEzPtE0/view?usp=sharing). [![Screenshot of the",
"curled up\") As you can see, one part managed to",
"and warped upwards. At this point, I had to stop",
"in this case? These are my print settings; bed temperature",
"preview for a 3D model](https://i.stack.imgur.com/H0zNf.jpg \"Screenshot of the Cura preview",
"the Cura preview for a 3D model](https://i.stack.imgur.com/H0zNf.jpg \"Screenshot of the",
"nozzle temperature is 195 °C. [![Screenshot of the Travel and",
"settings in Cura](https://i.stack.imgur.com/7EaSA.png \"Screenshot of the Travel and Build Plate",
"\"Screenshot of the Travel and Build Plate Adhesion settings in",
"I want to print the following model on my Kobra",
"tried it 3 times now, it always results in this:",
"always results in this: [![Photo of the printed model on",
"process. The element which broke free really has a strong",
"and Build Plate Adhesion settings in Cura](https://i.stack.imgur.com/7EaSA.png \"Screenshot of the",
"[![Screenshot of the Travel and Build Plate Adhesion settings in",
"[![Photo of the printed model on the build plate with",
"Cura preview for a 3D model\")](https://i.stack.imgur.com/H0zNf.jpg \"Screenshot of the Cura",
"printed model on the build plate with corners curled up\")",
"my Kobra Max using ABS. I have uploaded it [here](https://drive.google.com/file/d/1XMasuTVzg3MCHDd3Txi7sb-pUqEzPtE0/view?usp=sharing).",
"3 times now, it always results in this: [![Photo of",
"stop the print process. The element which broke free really",
"which broke free really has a strong will to bend.",
"model\")](https://i.stack.imgur.com/H0zNf.jpg \"Screenshot of the Cura preview for a 3D model\")",
"Kobra Max using ABS. I have uploaded it [here](https://drive.google.com/file/d/1XMasuTVzg3MCHDd3Txi7sb-pUqEzPtE0/view?usp=sharing). [![Screenshot",
"and nozzle temperature is 195 °C. [![Screenshot of the Travel",
"this case? These are my print settings; bed temperature is",
"and Build Plate Adhesion settings in Cura\")](https://i.stack.imgur.com/7EaSA.png \"Screenshot of the",
"Plate Adhesion settings in Cura\")](https://i.stack.imgur.com/7EaSA.png \"Screenshot of the Travel and",
"a strong will to bend. What could I do in",
"ABS. I have uploaded it [here](https://drive.google.com/file/d/1XMasuTVzg3MCHDd3Txi7sb-pUqEzPtE0/view?usp=sharing). [![Screenshot of the Cura",
"plate with corners curled up](https://i.stack.imgur.com/SoZMu.png \"Photo of the printed model"
] |
[
"I bought the Inland PLA+ and PETG+ from Microcenter. The",
"after one or two layers with oozie everywhere and I",
"from Microcenter. The first thing that my son asked me",
"PLA+ 205/60 * PETG+ 230/70 I'm thinking that for this",
"(PLA) and after that I bought the Inland PLA+ and",
"B1 printer :-) I printed the Pokemon with the white",
"set the correct temperator for both filaments: * PLA+ 205/60",
"PLA+ and now it's printing correctly (It's 91% complete right",
":-) I printed the Pokemon with the white filament that",
"the white filament that come as a sample with the",
"printer :-) I printed the Pokemon with the white filament",
"of the complexity. Is that correct? If not, what I",
"son asked me to print is the toaster. Well, I",
"with the white filament that come as a sample with",
"I had to stop printing. I replaced the filament with",
"the correct temperator for both filaments: * PLA+ 205/60 *",
"that I bought the Inland PLA+ and PETG+ from Microcenter.",
"I'm new in the 3D priting and I bought a",
"I tried to print three times with the PETG+ filament",
"tried to print three times with the PETG+ filament and",
"bought the Inland PLA+ and PETG+ from Microcenter. The first",
"the 3D priting and I bought a BIQU B1 printer",
"correct temperator for both filaments: * PLA+ 205/60 * PETG+",
"of object (torture toaster) it doesn't work with PETG because",
"printing correctly (It's 91% complete right now :-) ) So,",
"white filament that come as a sample with the printer",
"oozie everywhere and I had to stop printing. I replaced",
"Microcenter. The first thing that my son asked me to",
"both filaments: * PLA+ 205/60 * PETG+ 230/70 I'm thinking",
"bought a BIQU B1 printer :-) I printed the Pokemon",
"in the 3D priting and I bought a BIQU B1",
"after that I bought the Inland PLA+ and PETG+ from",
"up after one or two layers with oozie everywhere and",
"and always I end up after one or two layers",
"the PETG+ filament and always I end up after one",
"one or two layers with oozie everywhere and I had",
"PETG+ filament and always I end up after one or",
"toaster. Well, I tried to print three times with the",
"205/60 * PETG+ 230/70 I'm thinking that for this type",
"the filament with the PLA+ and now it's printing correctly",
"a sample with the printer (PLA) and after that I",
"that for this type of object (torture toaster) it doesn't",
"Pokemon with the white filament that come as a sample",
"times with the PETG+ filament and always I end up",
"I bought a BIQU B1 printer :-) I printed the",
"temperator for both filaments: * PLA+ 205/60 * PETG+ 230/70",
"If not, what I could be doing wrong with PETG+",
"two layers with oozie everywhere and I had to stop",
"correct? If not, what I could be doing wrong with",
"* PETG+ 230/70 I'm thinking that for this type of",
"the Pokemon with the white filament that come as a",
"filaments: * PLA+ 205/60 * PETG+ 230/70 I'm thinking that",
"to print is the toaster. Well, I tried to print",
":-) ) So, I set the correct temperator for both",
"type of object (torture toaster) it doesn't work with PETG",
"Well, I tried to print three times with the PETG+",
"(It's 91% complete right now :-) ) So, I set",
"that my son asked me to print is the toaster.",
"stop printing. I replaced the filament with the PLA+ and",
"Is that correct? If not, what I could be doing",
"my son asked me to print is the toaster. Well,",
"PETG+ 230/70 I'm thinking that for this type of object",
") So, I set the correct temperator for both filaments:",
"So, I set the correct temperator for both filaments: *",
"BIQU B1 printer :-) I printed the Pokemon with the",
"for this type of object (torture toaster) it doesn't work",
"the PLA+ and now it's printing correctly (It's 91% complete",
"and now it's printing correctly (It's 91% complete right now",
"first thing that my son asked me to print is",
"me to print is the toaster. Well, I tried to",
"PETG because of the complexity. Is that correct? If not,",
"(torture toaster) it doesn't work with PETG because of the",
"print is the toaster. Well, I tried to print three",
"come as a sample with the printer (PLA) and after",
"Inland PLA+ and PETG+ from Microcenter. The first thing that",
"a BIQU B1 printer :-) I printed the Pokemon with",
"printer (PLA) and after that I bought the Inland PLA+",
"The first thing that my son asked me to print",
"for both filaments: * PLA+ 205/60 * PETG+ 230/70 I'm",
"3D priting and I bought a BIQU B1 printer :-)",
"thing that my son asked me to print is the",
"now it's printing correctly (It's 91% complete right now :-)",
"complete right now :-) ) So, I set the correct",
"to print three times with the PETG+ filament and always",
"and I bought a BIQU B1 printer :-) I printed",
"and after that I bought the Inland PLA+ and PETG+",
"now :-) ) So, I set the correct temperator for",
"* PLA+ 205/60 * PETG+ 230/70 I'm thinking that for",
"right now :-) ) So, I set the correct temperator",
"is the toaster. Well, I tried to print three times",
"this type of object (torture toaster) it doesn't work with",
"I replaced the filament with the PLA+ and now it's",
"PLA+ and PETG+ from Microcenter. The first thing that my",
"PETG+ from Microcenter. The first thing that my son asked",
"with the printer (PLA) and after that I bought the",
"because of the complexity. Is that correct? If not, what",
"sample with the printer (PLA) and after that I bought",
"to stop printing. I replaced the filament with the PLA+",
"I'm thinking that for this type of object (torture toaster)",
"everywhere and I had to stop printing. I replaced the",
"with PETG because of the complexity. Is that correct? If",
"complexity. Is that correct? If not, what I could be",
"three times with the PETG+ filament and always I end",
"the printer (PLA) and after that I bought the Inland",
"I set the correct temperator for both filaments: * PLA+",
"and PETG+ from Microcenter. The first thing that my son",
"filament and always I end up after one or two",
"printing. I replaced the filament with the PLA+ and now",
"91% complete right now :-) ) So, I set the",
"the Inland PLA+ and PETG+ from Microcenter. The first thing",
"asked me to print is the toaster. Well, I tried",
"with the PLA+ and now it's printing correctly (It's 91%",
"with the PETG+ filament and always I end up after",
"filament with the PLA+ and now it's printing correctly (It's",
"replaced the filament with the PLA+ and now it's printing",
"always I end up after one or two layers with",
"printed the Pokemon with the white filament that come as",
"end up after one or two layers with oozie everywhere",
"as a sample with the printer (PLA) and after that",
"doesn't work with PETG because of the complexity. Is that",
"print three times with the PETG+ filament and always I",
"or two layers with oozie everywhere and I had to",
"and I had to stop printing. I replaced the filament",
"toaster) it doesn't work with PETG because of the complexity.",
"that correct? If not, what I could be doing wrong",
"that come as a sample with the printer (PLA) and",
"I printed the Pokemon with the white filament that come",
"layers with oozie everywhere and I had to stop printing.",
"the complexity. Is that correct? If not, what I could",
"the toaster. Well, I tried to print three times with",
"object (torture toaster) it doesn't work with PETG because of",
"work with PETG because of the complexity. Is that correct?",
"I end up after one or two layers with oozie",
"it's printing correctly (It's 91% complete right now :-) )",
"priting and I bought a BIQU B1 printer :-) I",
"230/70 I'm thinking that for this type of object (torture",
"new in the 3D priting and I bought a BIQU",
"with oozie everywhere and I had to stop printing. I",
"not, what I could be doing wrong with PETG+ filament?",
"it doesn't work with PETG because of the complexity. Is",
"correctly (It's 91% complete right now :-) ) So, I",
"had to stop printing. I replaced the filament with the",
"thinking that for this type of object (torture toaster) it",
"filament that come as a sample with the printer (PLA)"
] |
[
"can set the number of top layers to zero (**Print",
"notch, like this... [![Screenshot of the preview of a 3D",
"**Layers and perimeters** > **Solid Layers** > **Top** = 0),",
"> **Solid Layers** > **Top** = 0), which gets rid",
"no Top Layers](https://i.stack.imgur.com/mdzlT.png \"Screenshot of the preview of a 3D",
"model in PrusaSlicer with no Top Layers](https://i.stack.imgur.com/mdzlT.png \"Screenshot of the",
"of a 3D model in PrusaSlicer with no Top Layers\")](https://i.stack.imgur.com/mdzlT.png",
"of a 3D model in PrusaSlicer with no Top Layers\")",
"layers, but with infill and solid walls for the notch,",
"a 3D model in PrusaSlicer with no Top Layers](https://i.stack.imgur.com/mdzlT.png \"Screenshot",
"in PrusaSlicer with no Top Layers](https://i.stack.imgur.com/mdzlT.png \"Screenshot of the preview",
"any way to do what I want without awful shenanigans",
"notch in it, without top layers, but with infill and",
"base from the notch, like this... [![Screenshot of the preview",
"from the notch, like this... [![Screenshot of the preview of",
"Top Layers](https://i.stack.imgur.com/mdzlT.png \"Screenshot of the preview of a 3D model",
"0), which gets rid of the top layers as desired,",
"3D model in PrusaSlicer with no Top Layers\")](https://i.stack.imgur.com/mdzlT.png \"Screenshot of",
"to do what I want without awful shenanigans in OpenSCAD",
"PrusaSlicer\") I can set the number of top layers to",
"3D model in PrusaSlicer with no Top Layers](https://i.stack.imgur.com/mdzlT.png \"Screenshot of",
"PrusaSlicer with no Top Layers\") Is there any way to",
"a 3D model in PrusaSlicer\")](https://i.stack.imgur.com/rWoz3.png \"Screenshot of the preview of",
"a 3D model in PrusaSlicer with no Top Layers\")](https://i.stack.imgur.com/mdzlT.png \"Screenshot",
"Settings** > **Layers and perimeters** > **Solid Layers** > **Top**",
"3D model in PrusaSlicer with no Top Layers\") Is there",
"with infill and solid walls for the notch, like this...",
"top layers as desired, but it also removes the base",
"there any way to do what I want without awful",
"PrusaSlicer with OpenSCAD. I want to print a solid object",
"of a 3D model in PrusaSlicer with no Top Layers](https://i.stack.imgur.com/mdzlT.png",
"= 0), which gets rid of the top layers as",
"gets rid of the top layers as desired, but it",
"the preview of a 3D model in PrusaSlicer with no",
"I'm using PrusaSlicer with OpenSCAD. I want to print a",
"desired, but it also removes the base from the notch,",
"for the notch, like this... [![Screenshot of the preview of",
"3D model in PrusaSlicer](https://i.stack.imgur.com/rWoz3.png \"Screenshot of the preview of a",
"a 3D model in PrusaSlicer](https://i.stack.imgur.com/rWoz3.png \"Screenshot of the preview of",
"Layers\")](https://i.stack.imgur.com/mdzlT.png \"Screenshot of the preview of a 3D model in",
"like this... [![Screenshot of the preview of a 3D model",
"way to do what I want without awful shenanigans in",
"with a notch in it, without top layers, but with",
"a 3D model in PrusaSlicer with no Top Layers\") Is",
"solid walls for the notch, like this... [![Screenshot of the",
"what I want without awful shenanigans in OpenSCAD or editing",
"preview of a 3D model in PrusaSlicer with no Top",
"with no Top Layers\")](https://i.stack.imgur.com/mdzlT.png \"Screenshot of the preview of a",
"layers to zero (**Print Settings** > **Layers and perimeters** >",
"the preview of a 3D model in PrusaSlicer\") I can",
"which gets rid of the top layers as desired, but",
"in PrusaSlicer with no Top Layers\")](https://i.stack.imgur.com/mdzlT.png \"Screenshot of the preview",
"of the preview of a 3D model in PrusaSlicer\") I",
"model in PrusaSlicer with no Top Layers\") Is there any",
"and perimeters** > **Solid Layers** > **Top** = 0), which",
"[![Screenshot of the preview of a 3D model in PrusaSlicer",
"model in PrusaSlicer\")](https://i.stack.imgur.com/rWoz3.png \"Screenshot of the preview of a 3D",
"model in PrusaSlicer with no Top Layers\")](https://i.stack.imgur.com/mdzlT.png \"Screenshot of the",
"OpenSCAD. I want to print a solid object with a",
"this... [![Screenshot of the preview of a 3D model in",
"with OpenSCAD. I want to print a solid object with",
"> **Top** = 0), which gets rid of the top",
"PrusaSlicer\")](https://i.stack.imgur.com/rWoz3.png \"Screenshot of the preview of a 3D model in",
"**Top** = 0), which gets rid of the top layers",
"> **Layers and perimeters** > **Solid Layers** > **Top** =",
"do what I want without awful shenanigans in OpenSCAD or",
"I want without awful shenanigans in OpenSCAD or editing G-code?",
"\"Screenshot of the preview of a 3D model in PrusaSlicer\")",
"[![Screenshot of the preview of a 3D model in PrusaSlicer](https://i.stack.imgur.com/rWoz3.png",
"top layers to zero (**Print Settings** > **Layers and perimeters**",
"(**Print Settings** > **Layers and perimeters** > **Solid Layers** >",
"Layers\") Is there any way to do what I want",
"the number of top layers to zero (**Print Settings** >",
"using PrusaSlicer with OpenSCAD. I want to print a solid",
"but it also removes the base from the notch, like",
"to print a solid object with a notch in it,",
"in PrusaSlicer\") I can set the number of top layers",
"preview of a 3D model in PrusaSlicer\")](https://i.stack.imgur.com/rWoz3.png \"Screenshot of the",
"without top layers, but with infill and solid walls for",
"the top layers as desired, but it also removes the",
"solid object with a notch in it, without top layers,",
"rid of the top layers as desired, but it also",
"it, without top layers, but with infill and solid walls",
"I can set the number of top layers to zero",
"of top layers to zero (**Print Settings** > **Layers and",
"object with a notch in it, without top layers, but",
"in PrusaSlicer\")](https://i.stack.imgur.com/rWoz3.png \"Screenshot of the preview of a 3D model",
"layers as desired, but it also removes the base from",
"model in PrusaSlicer\") I can set the number of top",
"it also removes the base from the notch, like this...",
"3D model in PrusaSlicer\") I can set the number of",
"zero (**Print Settings** > **Layers and perimeters** > **Solid Layers**",
"of a 3D model in PrusaSlicer\") I can set the",
"\"Screenshot of the preview of a 3D model in PrusaSlicer",
"in PrusaSlicer with no Top Layers\") Is there any way",
"Top Layers\") Is there any way to do what I",
"infill and solid walls for the notch, like this... [![Screenshot",
"of a 3D model in PrusaSlicer](https://i.stack.imgur.com/rWoz3.png \"Screenshot of the preview",
"Top Layers\")](https://i.stack.imgur.com/mdzlT.png \"Screenshot of the preview of a 3D model",
"but with infill and solid walls for the notch, like",
"PrusaSlicer](https://i.stack.imgur.com/rWoz3.png \"Screenshot of the preview of a 3D model in",
"as desired, but it also removes the base from the",
"a 3D model in PrusaSlicer\") I can set the number",
"a solid object with a notch in it, without top",
"with no Top Layers](https://i.stack.imgur.com/mdzlT.png \"Screenshot of the preview of a",
"Layers** > **Top** = 0), which gets rid of the",
"and solid walls for the notch, like this... [![Screenshot of",
"also removes the base from the notch, like this... [![Screenshot",
"no Top Layers\") Is there any way to do what",
"preview of a 3D model in PrusaSlicer\") I can set",
"of the top layers as desired, but it also removes",
"of a 3D model in PrusaSlicer\")](https://i.stack.imgur.com/rWoz3.png \"Screenshot of the preview",
"3D model in PrusaSlicer\")](https://i.stack.imgur.com/rWoz3.png \"Screenshot of the preview of a",
"PrusaSlicer with no Top Layers\")](https://i.stack.imgur.com/mdzlT.png \"Screenshot of the preview of",
"top layers, but with infill and solid walls for the",
"in it, without top layers, but with infill and solid",
"a notch in it, without top layers, but with infill",
"model in PrusaSlicer](https://i.stack.imgur.com/rWoz3.png \"Screenshot of the preview of a 3D",
"PrusaSlicer with no Top Layers](https://i.stack.imgur.com/mdzlT.png \"Screenshot of the preview of",
"walls for the notch, like this... [![Screenshot of the preview",
"I want to print a solid object with a notch",
"the base from the notch, like this... [![Screenshot of the",
"want to print a solid object with a notch in",
"the preview of a 3D model in PrusaSlicer\")](https://i.stack.imgur.com/rWoz3.png \"Screenshot of",
"set the number of top layers to zero (**Print Settings**",
"perimeters** > **Solid Layers** > **Top** = 0), which gets",
"the preview of a 3D model in PrusaSlicer](https://i.stack.imgur.com/rWoz3.png \"Screenshot of",
"removes the base from the notch, like this... [![Screenshot of",
"of the preview of a 3D model in PrusaSlicer](https://i.stack.imgur.com/rWoz3.png \"Screenshot",
"Is there any way to do what I want without",
"the notch, like this... [![Screenshot of the preview of a",
"Layers](https://i.stack.imgur.com/mdzlT.png \"Screenshot of the preview of a 3D model in",
"with no Top Layers\") Is there any way to do",
"\"Screenshot of the preview of a 3D model in PrusaSlicer\")](https://i.stack.imgur.com/rWoz3.png",
"number of top layers to zero (**Print Settings** > **Layers",
"no Top Layers\")](https://i.stack.imgur.com/mdzlT.png \"Screenshot of the preview of a 3D",
"of the preview of a 3D model in PrusaSlicer\")](https://i.stack.imgur.com/rWoz3.png \"Screenshot",
"print a solid object with a notch in it, without",
"of the preview of a 3D model in PrusaSlicer with",
"preview of a 3D model in PrusaSlicer](https://i.stack.imgur.com/rWoz3.png \"Screenshot of the",
"**Solid Layers** > **Top** = 0), which gets rid of",
"to zero (**Print Settings** > **Layers and perimeters** > **Solid",
"in PrusaSlicer](https://i.stack.imgur.com/rWoz3.png \"Screenshot of the preview of a 3D model"
] |
[
"stringing and over-extrusion](https://i.stack.imgur.com/RXv0n.jpg \"Possible stringing and over-extrusion\")](https://i.stack.imgur.com/RXv0n.jpg \"Possible stringing and",
"mm PET on my Kobra Max printer with 80°C bed",
"printing Eryone 1.75 mm PET on my Kobra Max printer",
"stringing and over-extrusion\")](https://i.stack.imgur.com/RXv0n.jpg \"Possible stringing and over-extrusion\") Is this \"over-extrusion\"",
"and over-extrusion\")](https://i.stack.imgur.com/RXv0n.jpg \"Possible stringing and over-extrusion\") Is this \"over-extrusion\" and",
"am printing Eryone 1.75 mm PET on my Kobra Max",
"printer with 80°C bed and 230°C. I am experiencing this:",
"on my Kobra Max printer with 80°C bed and 230°C.",
"stringing and over-extrusion\") Is this \"over-extrusion\" and \"stringing\"? And how",
"Is this \"over-extrusion\" and \"stringing\"? And how do I avoid",
"Max printer with 80°C bed and 230°C. I am experiencing",
"over-extrusion](https://i.stack.imgur.com/RXv0n.jpg \"Possible stringing and over-extrusion\")](https://i.stack.imgur.com/RXv0n.jpg \"Possible stringing and over-extrusion\") Is",
"with 80°C bed and 230°C. I am experiencing this: [![Possible",
"this: [![Possible stringing and over-extrusion](https://i.stack.imgur.com/RXv0n.jpg \"Possible stringing and over-extrusion\")](https://i.stack.imgur.com/RXv0n.jpg \"Possible",
"\"Possible stringing and over-extrusion\") Is this \"over-extrusion\" and \"stringing\"? And",
"Kobra Max printer with 80°C bed and 230°C. I am",
"I am printing Eryone 1.75 mm PET on my Kobra",
"Eryone 1.75 mm PET on my Kobra Max printer with",
"[![Possible stringing and over-extrusion](https://i.stack.imgur.com/RXv0n.jpg \"Possible stringing and over-extrusion\")](https://i.stack.imgur.com/RXv0n.jpg \"Possible stringing",
"and over-extrusion](https://i.stack.imgur.com/RXv0n.jpg \"Possible stringing and over-extrusion\")](https://i.stack.imgur.com/RXv0n.jpg \"Possible stringing and over-extrusion\")",
"and 230°C. I am experiencing this: [![Possible stringing and over-extrusion](https://i.stack.imgur.com/RXv0n.jpg",
"PET on my Kobra Max printer with 80°C bed and",
"\"Possible stringing and over-extrusion\")](https://i.stack.imgur.com/RXv0n.jpg \"Possible stringing and over-extrusion\") Is this",
"80°C bed and 230°C. I am experiencing this: [![Possible stringing",
"over-extrusion\")](https://i.stack.imgur.com/RXv0n.jpg \"Possible stringing and over-extrusion\") Is this \"over-extrusion\" and \"stringing\"?",
"am experiencing this: [![Possible stringing and over-extrusion](https://i.stack.imgur.com/RXv0n.jpg \"Possible stringing and",
"I am experiencing this: [![Possible stringing and over-extrusion](https://i.stack.imgur.com/RXv0n.jpg \"Possible stringing",
"1.75 mm PET on my Kobra Max printer with 80°C",
"230°C. I am experiencing this: [![Possible stringing and over-extrusion](https://i.stack.imgur.com/RXv0n.jpg \"Possible",
"and over-extrusion\") Is this \"over-extrusion\" and \"stringing\"? And how do",
"over-extrusion\") Is this \"over-extrusion\" and \"stringing\"? And how do I",
"this \"over-extrusion\" and \"stringing\"? And how do I avoid this?",
"bed and 230°C. I am experiencing this: [![Possible stringing and",
"my Kobra Max printer with 80°C bed and 230°C. I",
"experiencing this: [![Possible stringing and over-extrusion](https://i.stack.imgur.com/RXv0n.jpg \"Possible stringing and over-extrusion\")](https://i.stack.imgur.com/RXv0n.jpg"
] |
[
"it. It stops halfway through the heatsink (black marker in",
"guide tube inside the hotend got damaged, resulting in decreased",
"have an HBot 3D 1.1 printer (it's a CoreXY style",
"printer\")](https://i.stack.imgur.com/Pkoj3.jpg \"Photo of the heat block and nozzle of the",
"style printer, newer versions are produced by ZMorph). I think",
"can't push the filament through it. It stops halfway through",
"and I don't think I can unscrew the heat block",
"I'm sure the nozzle itself isn't clogged. I've done some",
"some cold-pulling on one end, inserted a thin wire from",
"the insides with a flashlight. [![Photo of the heat block",
"block and nozzle of the HBot 3D printer](https://i.stack.imgur.com/Pkoj3.jpg \"Photo of",
"and examined the insides with a flashlight. [![Photo of the",
"nozzle since it's simply a hexagonal nut, but here it",
"sure the nozzle itself isn't clogged. I've done some cold-pulling",
"1.1 printer (it's a CoreXY style printer, newer versions are",
"nozzle and heat block are one part and I don't",
"(black marker in the attached photo). I need some help,",
"halfway through the heatsink (black marker in the attached photo).",
"which I have at home, I can just unscrew the",
"but here it seems that the nozzle and heat block",
"got damaged, resulting in decreased diameter, which means I can't",
"the heatsink (black marker in the attached photo). I need",
"versions are produced by ZMorph). I think that a filament",
"heat block and the heatsink. I'm not sure what to",
"3D 1.1 printer (it's a CoreXY style printer, newer versions",
"that a filament guide tube inside the hotend got damaged,",
"decreased diameter, which means I can't push the filament through",
"HBot 3D 1.1 printer (it's a CoreXY style printer, newer",
"I can't push the filament through it. It stops halfway",
"the filament through it. It stops halfway through the heatsink",
"and the heatsink. I'm not sure what to do. I'm",
"3D printer](https://i.stack.imgur.com/Pkoj3.jpg \"Photo of the heat block and nozzle of",
"have at home, I can just unscrew the nozzle since",
"on one end, inserted a thin wire from the other,",
"filament guide tube inside the hotend got damaged, resulting in",
"are one part and I don't think I can unscrew",
"in the attached photo). I need some help, I'm not",
"sure what to do. I'm sure the nozzle itself isn't",
"I have an HBot 3D 1.1 printer (it's a CoreXY",
"HBot 3D printer](https://i.stack.imgur.com/Pkoj3.jpg \"Photo of the heat block and nozzle",
"a flashlight. [![Photo of the heat block and nozzle of",
"the attached photo). I need some help, I'm not sure",
"with a flashlight. [![Photo of the heat block and nozzle",
"just unscrew the nozzle since it's simply a hexagonal nut,",
"With my Ender 3 which I have at home, I",
"which means I can't push the filament through it. It",
"think I can unscrew the heat block and the heatsink.",
"I've done some cold-pulling on one end, inserted a thin",
"think that a filament guide tube inside the hotend got",
"diameter, which means I can't push the filament through it.",
"push the filament through it. It stops halfway through the",
"wire from the other, and examined the insides with a",
"at home, I can just unscrew the nozzle since it's",
"need some help, I'm not sure how to disassemble this",
"examined the insides with a flashlight. [![Photo of the heat",
"a thin wire from the other, and examined the insides",
"through the heatsink (black marker in the attached photo). I",
"damaged, resulting in decreased diameter, which means I can't push",
"can unscrew the heat block and the heatsink. I'm not",
"the other, and examined the insides with a flashlight. [![Photo",
"the HBot 3D printer](https://i.stack.imgur.com/Pkoj3.jpg \"Photo of the heat block and",
"my Ender 3 which I have at home, I can",
"help, I'm not sure how to disassemble this type of",
"I don't think I can unscrew the heat block and",
"heat block and nozzle of the HBot 3D printer](https://i.stack.imgur.com/Pkoj3.jpg \"Photo",
"nut, but here it seems that the nozzle and heat",
"unscrew the nozzle since it's simply a hexagonal nut, but",
"that the nozzle and heat block are one part and",
"nozzle of the HBot 3D printer](https://i.stack.imgur.com/Pkoj3.jpg \"Photo of the heat",
"the heat block and nozzle of the HBot 3D printer\")](https://i.stack.imgur.com/Pkoj3.jpg",
"It stops halfway through the heatsink (black marker in the",
"it seems that the nozzle and heat block are one",
"can just unscrew the nozzle since it's simply a hexagonal",
"a filament guide tube inside the hotend got damaged, resulting",
"and nozzle of the HBot 3D printer](https://i.stack.imgur.com/Pkoj3.jpg \"Photo of the",
"type of hotend. With my Ender 3 which I have",
"I have at home, I can just unscrew the nozzle",
"[![Photo of the heat block and nozzle of the HBot",
"some help, I'm not sure how to disassemble this type",
"attached photo). I need some help, I'm not sure how",
"produced by ZMorph). I think that a filament guide tube",
"a hexagonal nut, but here it seems that the nozzle",
"the heat block and the heatsink. I'm not sure what",
"3 which I have at home, I can just unscrew",
"tube inside the hotend got damaged, resulting in decreased diameter,",
"marker in the attached photo). I need some help, I'm",
"an HBot 3D 1.1 printer (it's a CoreXY style printer,",
"not sure how to disassemble this type of hotend. With",
"3D printer\")](https://i.stack.imgur.com/Pkoj3.jpg \"Photo of the heat block and nozzle of",
"of the heat block and nozzle of the HBot 3D",
"HBot 3D printer\")](https://i.stack.imgur.com/Pkoj3.jpg \"Photo of the heat block and nozzle",
"of the HBot 3D printer\")](https://i.stack.imgur.com/Pkoj3.jpg \"Photo of the heat block",
"don't think I can unscrew the heat block and the",
"I think that a filament guide tube inside the hotend",
"other, and examined the insides with a flashlight. [![Photo of",
"and nozzle of the HBot 3D printer\")](https://i.stack.imgur.com/Pkoj3.jpg \"Photo of the",
"inside the hotend got damaged, resulting in decreased diameter, which",
"what to do. I'm sure the nozzle itself isn't clogged.",
"filament through it. It stops halfway through the heatsink (black",
"simply a hexagonal nut, but here it seems that the",
"ZMorph). I think that a filament guide tube inside the",
"itself isn't clogged. I've done some cold-pulling on one end,",
"the HBot 3D printer\")](https://i.stack.imgur.com/Pkoj3.jpg \"Photo of the heat block and",
"this type of hotend. With my Ender 3 which I",
"stops halfway through the heatsink (black marker in the attached",
"cold-pulling on one end, inserted a thin wire from the",
"not sure what to do. I'm sure the nozzle itself",
"the hotend got damaged, resulting in decreased diameter, which means",
"I can just unscrew the nozzle since it's simply a",
"block are one part and I don't think I can",
"photo). I need some help, I'm not sure how to",
"unscrew the heat block and the heatsink. I'm not sure",
"are produced by ZMorph). I think that a filament guide",
"one part and I don't think I can unscrew the",
"disassemble this type of hotend. With my Ender 3 which",
"block and nozzle of the HBot 3D printer\")](https://i.stack.imgur.com/Pkoj3.jpg \"Photo of",
"(it's a CoreXY style printer, newer versions are produced by",
"printer, newer versions are produced by ZMorph). I think that",
"newer versions are produced by ZMorph). I think that a",
"home, I can just unscrew the nozzle since it's simply",
"isn't clogged. I've done some cold-pulling on one end, inserted",
"hotend got damaged, resulting in decreased diameter, which means I",
"the heat block and nozzle of the HBot 3D printer\")",
"it's simply a hexagonal nut, but here it seems that",
"since it's simply a hexagonal nut, but here it seems",
"from the other, and examined the insides with a flashlight.",
"how to disassemble this type of hotend. With my Ender",
"flashlight. [![Photo of the heat block and nozzle of the",
"\"Photo of the heat block and nozzle of the HBot",
"one end, inserted a thin wire from the other, and",
"nozzle itself isn't clogged. I've done some cold-pulling on one",
"CoreXY style printer, newer versions are produced by ZMorph). I",
"heat block and nozzle of the HBot 3D printer\")](https://i.stack.imgur.com/Pkoj3.jpg \"Photo",
"nozzle of the HBot 3D printer\")](https://i.stack.imgur.com/Pkoj3.jpg \"Photo of the heat",
"of hotend. With my Ender 3 which I have at",
"the nozzle since it's simply a hexagonal nut, but here",
"printer (it's a CoreXY style printer, newer versions are produced",
"I'm not sure how to disassemble this type of hotend.",
"to do. I'm sure the nozzle itself isn't clogged. I've",
"heatsink (black marker in the attached photo). I need some",
"and heat block are one part and I don't think",
"seems that the nozzle and heat block are one part",
"hexagonal nut, but here it seems that the nozzle and",
"here it seems that the nozzle and heat block are",
"clogged. I've done some cold-pulling on one end, inserted a",
"I need some help, I'm not sure how to disassemble",
"a CoreXY style printer, newer versions are produced by ZMorph).",
"do. I'm sure the nozzle itself isn't clogged. I've done",
"the heat block and nozzle of the HBot 3D printer](https://i.stack.imgur.com/Pkoj3.jpg",
"to disassemble this type of hotend. With my Ender 3",
"of the HBot 3D printer](https://i.stack.imgur.com/Pkoj3.jpg \"Photo of the heat block",
"heat block are one part and I don't think I",
"the heatsink. I'm not sure what to do. I'm sure",
"the nozzle itself isn't clogged. I've done some cold-pulling on",
"the nozzle and heat block are one part and I",
"part and I don't think I can unscrew the heat",
"by ZMorph). I think that a filament guide tube inside",
"I'm not sure what to do. I'm sure the nozzle",
"resulting in decreased diameter, which means I can't push the",
"inserted a thin wire from the other, and examined the",
"heatsink. I'm not sure what to do. I'm sure the",
"hotend. With my Ender 3 which I have at home,",
"printer](https://i.stack.imgur.com/Pkoj3.jpg \"Photo of the heat block and nozzle of the",
"in decreased diameter, which means I can't push the filament",
"means I can't push the filament through it. It stops",
"block and the heatsink. I'm not sure what to do.",
"end, inserted a thin wire from the other, and examined",
"thin wire from the other, and examined the insides with",
"done some cold-pulling on one end, inserted a thin wire",
"sure how to disassemble this type of hotend. With my",
"insides with a flashlight. [![Photo of the heat block and",
"I can unscrew the heat block and the heatsink. I'm",
"through it. It stops halfway through the heatsink (black marker",
"Ender 3 which I have at home, I can just"
] |
[
"middle of the bed is still too far from the",
"mind but the middle of the bed is still too",
"week ago and since then I've been having nightmares with",
"a solution. The two most recommended upgrades were a glass",
"then I've been having nightmares with leveling/tramming the printer bed.",
"to tram it again after every print to not being",
"woke up and I can't seem to get my bed",
"and watching a lot of problem-related content to try and",
"the middle of the bed is still too far from",
"way but I still had to tram the bed every",
"every print to not being able to level it at",
"bed and stiffer springs for the bed so that's what",
"lot of problem-related content to try and find a solution.",
"it again after every print to not being able to",
"bed leveled in the middle. I've tried every possible solution",
"possible solution that crossed my mind but the middle of",
"but I still had to tram the bed every couple",
"seem to get my bed leveled in the middle. I've",
"tram it again after every print to not being able",
"this Ender 3 Pro about 1 week ago and since",
"can't seem to get my bed leveled in the middle.",
"my bed leveled in the middle. I've tried every possible",
"all. Since then I've been reading and watching a lot",
"glass bed and the yellow springs and for a day",
"but the middle of the bed is still too far",
"in an acceptable way but I still had to tram",
"Since then I've been reading and watching a lot of",
"springs for the bed so that's what I bought. I",
"printer bed. From having to tram it again after every",
"of prints. Today for some unknown reason, I woke up",
"ago and since then I've been having nightmares with leveling/tramming",
"of the bed is still too far from the nozzle",
"every couple of prints. Today for some unknown reason, I",
"I've been reading and watching a lot of problem-related content",
"solution that crossed my mind but the middle of the",
"so I got it to work in an acceptable way",
"bed and the yellow springs and for a day or",
"stiffer springs for the bed so that's what I bought.",
"reading and watching a lot of problem-related content to try",
"the printer bed. From having to tram it again after",
"been reading and watching a lot of problem-related content to",
"two most recommended upgrades were a glass bed and stiffer",
"not being able to level it at all. Since then",
"for some unknown reason, I woke up and I can't",
"crossed my mind but the middle of the bed is",
"problem-related content to try and find a solution. The two",
"that crossed my mind but the middle of the bed",
"for a day or so I got it to work",
"I purchased the original Creality glass bed and the yellow",
"still had to tram the bed every couple of prints.",
"try and find a solution. The two most recommended upgrades",
"I bought. I purchased the original Creality glass bed and",
"the yellow springs and for a day or so I",
"too far from the nozzle and the filament won't stick.",
"bed is still too far from the nozzle and the",
"been having nightmares with leveling/tramming the printer bed. From having",
"content to try and find a solution. The two most",
"what I bought. I purchased the original Creality glass bed",
"the bed is still too far from the nozzle and",
"to try and find a solution. The two most recommended",
"every possible solution that crossed my mind but the middle",
"I woke up and I can't seem to get my",
"to level it at all. Since then I've been reading",
"then I've been reading and watching a lot of problem-related",
"it to work in an acceptable way but I still",
"get my bed leveled in the middle. I've tried every",
"about 1 week ago and since then I've been having",
"reason, I woke up and I can't seem to get",
"I've been having nightmares with leveling/tramming the printer bed. From",
"Creality glass bed and the yellow springs and for a",
"solution. The two most recommended upgrades were a glass bed",
"to get my bed leveled in the middle. I've tried",
"in the middle. I've tried every possible solution that crossed",
"having to tram it again after every print to not",
"bed so that's what I bought. I purchased the original",
"and since then I've been having nightmares with leveling/tramming the",
"leveling/tramming the printer bed. From having to tram it again",
"purchased the original Creality glass bed and the yellow springs",
"is still too far from the nozzle and the filament",
"the original Creality glass bed and the yellow springs and",
"for the bed so that's what I bought. I purchased",
"the bed every couple of prints. Today for some unknown",
"after every print to not being able to level it",
"I can't seem to get my bed leveled in the",
"I've tried every possible solution that crossed my mind but",
"recommended upgrades were a glass bed and stiffer springs for",
"having nightmares with leveling/tramming the printer bed. From having to",
"a lot of problem-related content to try and find a",
"being able to level it at all. Since then I've",
"Ender 3 Pro about 1 week ago and since then",
"still too far from the nozzle and the filament won't",
"couple of prints. Today for some unknown reason, I woke",
"Pro about 1 week ago and since then I've been",
"acceptable way but I still had to tram the bed",
"glass bed and stiffer springs for the bed so that's",
"bed. From having to tram it again after every print",
"Today for some unknown reason, I woke up and I",
"of problem-related content to try and find a solution. The",
"1 week ago and since then I've been having nightmares",
"the middle. I've tried every possible solution that crossed my",
"print to not being able to level it at all.",
"so that's what I bought. I purchased the original Creality",
"bought. I purchased the original Creality glass bed and the",
"to tram the bed every couple of prints. Today for",
"had to tram the bed every couple of prints. Today",
"From having to tram it again after every print to",
"watching a lot of problem-related content to try and find",
"to not being able to level it at all. Since",
"and for a day or so I got it to",
"yellow springs and for a day or so I got",
"tried every possible solution that crossed my mind but the",
"again after every print to not being able to level",
"the bed so that's what I bought. I purchased the",
"unknown reason, I woke up and I can't seem to",
"my mind but the middle of the bed is still",
"some unknown reason, I woke up and I can't seem",
"middle. I've tried every possible solution that crossed my mind",
"since then I've been having nightmares with leveling/tramming the printer",
"most recommended upgrades were a glass bed and stiffer springs",
"to work in an acceptable way but I still had",
"with leveling/tramming the printer bed. From having to tram it",
"purchased this Ender 3 Pro about 1 week ago and",
"and I can't seem to get my bed leveled in",
"that's what I bought. I purchased the original Creality glass",
"leveled in the middle. I've tried every possible solution that",
"got it to work in an acceptable way but I",
"3 Pro about 1 week ago and since then I've",
"find a solution. The two most recommended upgrades were a",
"a day or so I got it to work in",
"it at all. Since then I've been reading and watching",
"tram the bed every couple of prints. Today for some",
"prints. Today for some unknown reason, I woke up and",
"an acceptable way but I still had to tram the",
"I still had to tram the bed every couple of",
"just purchased this Ender 3 Pro about 1 week ago",
"and the yellow springs and for a day or so",
"The two most recommended upgrades were a glass bed and",
"nightmares with leveling/tramming the printer bed. From having to tram",
"day or so I got it to work in an",
"upgrades were a glass bed and stiffer springs for the",
"work in an acceptable way but I still had to",
"original Creality glass bed and the yellow springs and for",
"or so I got it to work in an acceptable",
"I just purchased this Ender 3 Pro about 1 week",
"were a glass bed and stiffer springs for the bed",
"at all. Since then I've been reading and watching a",
"up and I can't seem to get my bed leveled",
"I got it to work in an acceptable way but",
"and stiffer springs for the bed so that's what I",
"able to level it at all. Since then I've been",
"springs and for a day or so I got it",
"level it at all. Since then I've been reading and",
"a glass bed and stiffer springs for the bed so",
"bed every couple of prints. Today for some unknown reason,",
"and find a solution. The two most recommended upgrades were"
] |
[
"set this in Cura? When I search for \"*feed*\" in",
"When I search for speed, multiple speed settings turn up,",
"What does he mean, and how could I set this",
"speed settings turn up, not only one. How could I",
"not only one. How could I do what he recommended?",
"that somebody recommended \"[a feeding rate of 105%](https://www.amazon.de/gp/customer-reviews/RVMUN4CW9ZLKX/ref=cm_cr_arp_d_rvw_ttl?ie=UTF8&ASIN=B01080YND6)\". What does",
"nothing is found, so I suspect he means \"*speed*\". When",
"could I do what he recommended? Thank you! [](https://i.stack.imgur.com/DoQ2L.png)",
"this in Cura? When I search for \"*feed*\" in the",
"print settings properties of Cura, nothing is found, so I",
"multiple speed settings turn up, not only one. How could",
"read that somebody recommended \"[a feeding rate of 105%](https://www.amazon.de/gp/customer-reviews/RVMUN4CW9ZLKX/ref=cm_cr_arp_d_rvw_ttl?ie=UTF8&ASIN=B01080YND6)\". What",
"for \"*feed*\" in the print settings properties of Cura, nothing",
"filament I read that somebody recommended \"[a feeding rate of",
"does he mean, and how could I set this in",
"certain filament I read that somebody recommended \"[a feeding rate",
"for a certain filament I read that somebody recommended \"[a",
"Cura, nothing is found, so I suspect he means \"*speed*\".",
"he means \"*speed*\". When I search for speed, multiple speed",
"in the print settings properties of Cura, nothing is found,",
"I suspect he means \"*speed*\". When I search for speed,",
"suspect he means \"*speed*\". When I search for speed, multiple",
"a review for a certain filament I read that somebody",
"only one. How could I do what he recommended? Thank",
"turn up, not only one. How could I do what",
"I search for \"*feed*\" in the print settings properties of",
"in Cura? When I search for \"*feed*\" in the print",
"means \"*speed*\". When I search for speed, multiple speed settings",
"I read that somebody recommended \"[a feeding rate of 105%](https://www.amazon.de/gp/customer-reviews/RVMUN4CW9ZLKX/ref=cm_cr_arp_d_rvw_ttl?ie=UTF8&ASIN=B01080YND6)\".",
"rate of 105%](https://www.amazon.de/gp/customer-reviews/RVMUN4CW9ZLKX/ref=cm_cr_arp_d_rvw_ttl?ie=UTF8&ASIN=B01080YND6)\". What does he mean, and how could",
"I set this in Cura? When I search for \"*feed*\"",
"somebody recommended \"[a feeding rate of 105%](https://www.amazon.de/gp/customer-reviews/RVMUN4CW9ZLKX/ref=cm_cr_arp_d_rvw_ttl?ie=UTF8&ASIN=B01080YND6)\". What does he",
"In a review for a certain filament I read that",
"105%](https://www.amazon.de/gp/customer-reviews/RVMUN4CW9ZLKX/ref=cm_cr_arp_d_rvw_ttl?ie=UTF8&ASIN=B01080YND6)\". What does he mean, and how could I set",
"When I search for \"*feed*\" in the print settings properties",
"and how could I set this in Cura? When I",
"review for a certain filament I read that somebody recommended",
"recommended \"[a feeding rate of 105%](https://www.amazon.de/gp/customer-reviews/RVMUN4CW9ZLKX/ref=cm_cr_arp_d_rvw_ttl?ie=UTF8&ASIN=B01080YND6)\". What does he mean,",
"one. How could I do what he recommended? Thank you!",
"of 105%](https://www.amazon.de/gp/customer-reviews/RVMUN4CW9ZLKX/ref=cm_cr_arp_d_rvw_ttl?ie=UTF8&ASIN=B01080YND6)\". What does he mean, and how could I",
"could I set this in Cura? When I search for",
"a certain filament I read that somebody recommended \"[a feeding",
"\"*feed*\" in the print settings properties of Cura, nothing is",
"settings turn up, not only one. How could I do",
"speed, multiple speed settings turn up, not only one. How",
"he mean, and how could I set this in Cura?",
"the print settings properties of Cura, nothing is found, so",
"settings properties of Cura, nothing is found, so I suspect",
"up, not only one. How could I do what he",
"search for speed, multiple speed settings turn up, not only",
"is found, so I suspect he means \"*speed*\". When I",
"\"[a feeding rate of 105%](https://www.amazon.de/gp/customer-reviews/RVMUN4CW9ZLKX/ref=cm_cr_arp_d_rvw_ttl?ie=UTF8&ASIN=B01080YND6)\". What does he mean, and",
"search for \"*feed*\" in the print settings properties of Cura,",
"how could I set this in Cura? When I search",
"I do what he recommended? Thank you! [\". What does he mean, and how",
"\"*speed*\". When I search for speed, multiple speed settings turn",
"How could I do what he recommended? Thank you! [![enter",
"properties of Cura, nothing is found, so I suspect he"
] |
[
"the filament. Mine just keeps on printing. I've tried \"pause\"",
"to 3D printing. I have a Longer LK5 Pro. I",
"retract the head, and allow you to change the filament.",
"I've tried \"pause\" and done the filament change, but unsuccessfully",
"to stop printing, retract the head, and allow you to",
"on the Cura program called \"change filament\", which is supposed",
"allow you to change the filament. Mine just keeps on",
"raised letters, and wanted to have white letters on the",
"just keeps on printing. I've tried \"pause\" and done the",
"the head, and allow you to change the filament. Mine",
"the filament change, but unsuccessfully so far because of blobs",
"far because of blobs deposited on the letters. Any suggestions?",
"I am new to 3D printing. I have a Longer",
"part. I used a Post Processing script on the Cura",
"stop printing, retract the head, and allow you to change",
"and wanted to have white letters on the black part.",
"tried \"pause\" and done the filament change, but unsuccessfully so",
"I was making a part that has raised letters, and",
"Pro. I was making a part that has raised letters,",
"so far because of blobs deposited on the letters. Any",
"filament change, but unsuccessfully so far because of blobs deposited",
"filament. Mine just keeps on printing. I've tried \"pause\" and",
"have white letters on the black part. I used a",
"printing, retract the head, and allow you to change the",
"Longer LK5 Pro. I was making a part that has",
"black part. I used a Post Processing script on the",
"to change the filament. Mine just keeps on printing. I've",
"is supposed to stop printing, retract the head, and allow",
"Post Processing script on the Cura program called \"change filament\",",
"have a Longer LK5 Pro. I was making a part",
"a Longer LK5 Pro. I was making a part that",
"new to 3D printing. I have a Longer LK5 Pro.",
"the Cura program called \"change filament\", which is supposed to",
"that has raised letters, and wanted to have white letters",
"3D printing. I have a Longer LK5 Pro. I was",
"change, but unsuccessfully so far because of blobs deposited on",
"filament\", which is supposed to stop printing, retract the head,",
"supposed to stop printing, retract the head, and allow you",
"you to change the filament. Mine just keeps on printing.",
"change the filament. Mine just keeps on printing. I've tried",
"which is supposed to stop printing, retract the head, and",
"has raised letters, and wanted to have white letters on",
"Cura program called \"change filament\", which is supposed to stop",
"keeps on printing. I've tried \"pause\" and done the filament",
"done the filament change, but unsuccessfully so far because of",
"to have white letters on the black part. I used",
"unsuccessfully so far because of blobs deposited on the letters.",
"Processing script on the Cura program called \"change filament\", which",
"LK5 Pro. I was making a part that has raised",
"called \"change filament\", which is supposed to stop printing, retract",
"letters on the black part. I used a Post Processing",
"and done the filament change, but unsuccessfully so far because",
"I have a Longer LK5 Pro. I was making a",
"wanted to have white letters on the black part. I",
"script on the Cura program called \"change filament\", which is",
"program called \"change filament\", which is supposed to stop printing,",
"but unsuccessfully so far because of blobs deposited on the",
"am new to 3D printing. I have a Longer LK5",
"part that has raised letters, and wanted to have white",
"\"change filament\", which is supposed to stop printing, retract the",
"letters, and wanted to have white letters on the black",
"the black part. I used a Post Processing script on",
"white letters on the black part. I used a Post",
"on printing. I've tried \"pause\" and done the filament change,",
"I used a Post Processing script on the Cura program",
"making a part that has raised letters, and wanted to",
"printing. I have a Longer LK5 Pro. I was making",
"head, and allow you to change the filament. Mine just",
"\"pause\" and done the filament change, but unsuccessfully so far",
"printing. I've tried \"pause\" and done the filament change, but",
"a Post Processing script on the Cura program called \"change",
"used a Post Processing script on the Cura program called",
"on the black part. I used a Post Processing script",
"and allow you to change the filament. Mine just keeps",
"a part that has raised letters, and wanted to have",
"was making a part that has raised letters, and wanted",
"Mine just keeps on printing. I've tried \"pause\" and done"
] |
[
"* Slicer :Cura I have printed 1 model 3 times",
"Try 1: 190 °C / 50 °C * Try 2:",
"have printed 1 model 3 times with different settings (different",
"times with different settings (different temperatures and different bed temperatures).",
"mm * Material: PLA * Slicer :Cura I have printed",
"but then there is this 1 line on each model.",
"70 °C * Try 3: 230 °C / 50 °C",
"* Try 1: 190 °C / 50 °C * Try",
"bed temperatures). * Try 1: 190 °C / 50 °C",
"three printed models with the same printing error\") [![enter image",
"models show 1 \"line\" at some point. The models are",
"some point. The models are smooth all around, but then",
"then there is this 1 line on each model. What",
"* Nozzle: 0.4 mm * Material: PLA * Slicer :Cura",
"I have printed 1 model 3 times with different settings",
"there is this 1 line on each model. What is",
"same printing error\")](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed models with the",
"Max * Nozzle: 0.4 mm * Material: PLA * Slicer",
"3: 230 °C / 50 °C All 3 models show",
"models with the same printing error\")](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed",
"model. What is this error called, please? [![Photo of three",
"50 °C * Try 2: 210 °C / 70 °C",
"1: 190 °C / 50 °C * Try 2: 210",
"/ 70 °C * Try 3: 230 °C / 50",
"the same printing error](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed models with",
"1 model 3 times with different settings (different temperatures and",
"printing error\")](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed models with the same",
"50 °C All 3 models show 1 \"line\" at some",
"smooth all around, but then there is this 1 line",
"°C * Try 2: 210 °C / 70 °C *",
"line on each model. What is this error called, please?",
"210 °C / 70 °C * Try 3: 230 °C",
"all around, but then there is this 1 line on",
"model 3 times with different settings (different temperatures and different",
"error called, please? [![Photo of three printed models with the",
"same printing error](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed models with the",
"°C * Try 3: 230 °C / 50 °C All",
"different settings (different temperatures and different bed temperatures). * Try",
"\"line\" at some point. The models are smooth all around,",
"please? [](https://i.stack.imgur.com/x8b7D.png)",
"at some point. The models are smooth all around, but",
"Try 3: 230 °C / 50 °C All 3 models",
"this 1 line on each model. What is this error",
"°C / 50 °C * Try 2: 210 °C /",
"230 °C / 50 °C All 3 models show 1",
"three printed models with the same printing error\")](https://i.stack.imgur.com/zmV36.jpg \"Photo of",
"\"Photo of three printed models with the same printing error\")](https://i.stack.imgur.com/zmV36.jpg",
"PLA * Slicer :Cura I have printed 1 model 3",
"Material: PLA * Slicer :Cura I have printed 1 model",
"temperatures). * Try 1: 190 °C / 50 °C *",
"settings (different temperatures and different bed temperatures). * Try 1:",
"* Printer: Kobra Max * Nozzle: 0.4 mm * Material:",
"2: 210 °C / 70 °C * Try 3: 230",
"are smooth all around, but then there is this 1",
"with the same printing error\")](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed models",
"of three printed models with the same printing error](https://i.stack.imgur.com/zmV36.jpg \"Photo",
"(different temperatures and different bed temperatures). * Try 1: 190",
"3 times with different settings (different temperatures and different bed",
"/ 50 °C * Try 2: 210 °C / 70",
"models with the same printing error](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed",
"called, please? [![Photo of three printed models with the same",
"with the same printing error](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed models",
"different bed temperatures). * Try 1: 190 °C / 50",
"and different bed temperatures). * Try 1: 190 °C /",
"The models are smooth all around, but then there is",
"with different settings (different temperatures and different bed temperatures). *",
"190 °C / 50 °C * Try 2: 210 °C",
"Printer: Kobra Max * Nozzle: 0.4 mm * Material: PLA",
"\"Photo of three printed models with the same printing error\")",
"All 3 models show 1 \"line\" at some point. The",
"printed 1 model 3 times with different settings (different temperatures",
":Cura I have printed 1 model 3 times with different",
"Kobra Max * Nozzle: 0.4 mm * Material: PLA *",
"this error called, please? [![Photo of three printed models with",
"/ 50 °C All 3 models show 1 \"line\" at",
"printing error](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed models with the same",
"temperatures and different bed temperatures). * Try 1: 190 °C",
"°C All 3 models show 1 \"line\" at some point.",
"1 line on each model. What is this error called,",
"each model. What is this error called, please? [![Photo of",
"* Try 2: 210 °C / 70 °C * Try",
"is this 1 line on each model. What is this",
"on each model. What is this error called, please? [![Photo",
"is this error called, please? [![Photo of three printed models",
"point. The models are smooth all around, but then there",
"error\")](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed models with the same printing",
"error](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed models with the same printing",
"show 1 \"line\" at some point. The models are smooth",
"What is this error called, please? [![Photo of three printed",
"of three printed models with the same printing error\") [![enter",
"Nozzle: 0.4 mm * Material: PLA * Slicer :Cura I",
"printed models with the same printing error](https://i.stack.imgur.com/zmV36.jpg \"Photo of three",
"* Try 3: 230 °C / 50 °C All 3",
"of three printed models with the same printing error\")](https://i.stack.imgur.com/zmV36.jpg \"Photo",
"around, but then there is this 1 line on each",
"Slicer :Cura I have printed 1 model 3 times with",
"[![Photo of three printed models with the same printing error](https://i.stack.imgur.com/zmV36.jpg",
"printed models with the same printing error\") [![enter image description",
"three printed models with the same printing error](https://i.stack.imgur.com/zmV36.jpg \"Photo of",
"1 \"line\" at some point. The models are smooth all",
"* Material: PLA * Slicer :Cura I have printed 1",
"°C / 70 °C * Try 3: 230 °C /",
"3 models show 1 \"line\" at some point. The models",
"Try 2: 210 °C / 70 °C * Try 3:",
"0.4 mm * Material: PLA * Slicer :Cura I have",
"printed models with the same printing error\")](https://i.stack.imgur.com/zmV36.jpg \"Photo of three",
"the same printing error\")](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed models with",
"models are smooth all around, but then there is this"
] |
[
"* Slicer :Cura I have printed 1 model 3 times",
"Try 1: 190 °C / 50 °C * Try 2:",
"do I best hide this seam? [![Photo of three printed",
"same printing error\") These are some screenshots of the model",
"have printed 1 model 3 times with different settings (different",
"times with different settings (different temperatures and different bed temperatures).",
"mm * Material: PLA * Slicer :Cura I have printed",
"3 models show a seam. How / where do I",
"70 °C * Try 3: 230 °C / 50 °C",
"this seam? [![Photo of three printed models with the same",
"°C / 50 °C All 3 models show a seam.",
"* Try 1: 190 °C / 50 °C * Try",
"bed temperatures). * Try 1: 190 °C / 50 °C",
"* Nozzle: 0.4 mm * Material: PLA * Slicer :Cura",
"I have printed 1 model 3 times with different settings",
"°C All 3 models show a seam. How / where",
"best hide this seam? [![Photo of three printed models with",
"same printing error\")](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed models with the",
"Max * Nozzle: 0.4 mm * Material: PLA * Slicer",
"3: 230 °C / 50 °C All 3 models show",
"models with the same printing error\")](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed",
"50 °C * Try 2: 210 °C / 70 °C",
"1: 190 °C / 50 °C * Try 2: 210",
"/ 70 °C * Try 3: 230 °C / 50",
"the same printing error](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed models with",
"1 model 3 times with different settings (different temperatures and",
"/ where do I best hide this seam? [![Photo of",
"printing error\")](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed models with the same",
"°C * Try 2: 210 °C / 70 °C *",
"210 °C / 70 °C * Try 3: 230 °C",
"model 3 times with different settings (different temperatures and different",
"same printing error](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed models with the",
"°C * Try 3: 230 °C / 50 °C All",
"different settings (different temperatures and different bed temperatures). * Try",
"with the same printing error\") These are some screenshots of",
"where do I best hide this seam? [![Photo of three",
"a seam. How / where do I best hide this",
"50 °C All 3 models show a seam. How /",
"three printed models with the same printing error\") These are",
"Try 3: 230 °C / 50 °C All 3 models",
"°C / 50 °C * Try 2: 210 °C /",
"three printed models with the same printing error\")](https://i.stack.imgur.com/zmV36.jpg \"Photo of",
"\"Photo of three printed models with the same printing error\")](https://i.stack.imgur.com/zmV36.jpg",
"printing error\") These are some screenshots of the model in",
"PLA * Slicer :Cura I have printed 1 model 3",
"Material: PLA * Slicer :Cura I have printed 1 model",
"temperatures). * Try 1: 190 °C / 50 °C *",
"hide this seam? [![Photo of three printed models with the",
"settings (different temperatures and different bed temperatures). * Try 1:",
"the same printing error\") These are some screenshots of the",
"* Printer: Kobra Max * Nozzle: 0.4 mm * Material:",
"2: 210 °C / 70 °C * Try 3: 230",
"with the same printing error\")](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed models",
"of three printed models with the same printing error](https://i.stack.imgur.com/zmV36.jpg \"Photo",
"230 °C / 50 °C All 3 models show a",
"(different temperatures and different bed temperatures). * Try 1: 190",
"3 times with different settings (different temperatures and different bed",
"/ 50 °C * Try 2: 210 °C / 70",
"models with the same printing error](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed",
"with the same printing error](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed models",
"error\") These are some screenshots of the model in Fusion",
"different bed temperatures). * Try 1: 190 °C / 50",
"seam? [![Photo of three printed models with the same printing",
"printed models with the same printing error\") These are some",
"and different bed temperatures). * Try 1: 190 °C /",
"screenshots of the model in Fusion 360: [![enter image description",
"of three printed models with the same printing error\") These",
"How / where do I best hide this seam? [![Photo",
"with different settings (different temperatures and different bed temperatures). *",
"show a seam. How / where do I best hide",
"190 °C / 50 °C * Try 2: 210 °C",
"Printer: Kobra Max * Nozzle: 0.4 mm * Material: PLA",
"\"Photo of three printed models with the same printing error\")",
"These are some screenshots of the model in Fusion 360:",
"printed 1 model 3 times with different settings (different temperatures",
":Cura I have printed 1 model 3 times with different",
"Kobra Max * Nozzle: 0.4 mm * Material: PLA *",
"I best hide this seam? [![Photo of three printed models",
"/ 50 °C All 3 models show a seam. How",
"printing error](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed models with the same",
"temperatures and different bed temperatures). * Try 1: 190 °C",
"* Try 2: 210 °C / 70 °C * Try",
"All 3 models show a seam. How / where do",
"error](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed models with the same printing",
"some screenshots of the model in Fusion 360: [![enter image",
"Nozzle: 0.4 mm * Material: PLA * Slicer :Cura I",
"printed models with the same printing error](https://i.stack.imgur.com/zmV36.jpg \"Photo of three",
"are some screenshots of the model in Fusion 360: [![enter",
"* Try 3: 230 °C / 50 °C All 3",
"of three printed models with the same printing error\")](https://i.stack.imgur.com/zmV36.jpg \"Photo",
"Slicer :Cura I have printed 1 model 3 times with",
"seam. How / where do I best hide this seam?",
"[![Photo of three printed models with the same printing error](https://i.stack.imgur.com/zmV36.jpg",
"three printed models with the same printing error](https://i.stack.imgur.com/zmV36.jpg \"Photo of",
"of the model in Fusion 360: [](https://i.stack.imgur.com/x8b7D.png)",
"models show a seam. How / where do I best",
"* Material: PLA * Slicer :Cura I have printed 1",
"°C / 70 °C * Try 3: 230 °C /",
"models with the same printing error\") These are some screenshots",
"Try 2: 210 °C / 70 °C * Try 3:",
"0.4 mm * Material: PLA * Slicer :Cura I have",
"printed models with the same printing error\")](https://i.stack.imgur.com/zmV36.jpg \"Photo of three",
"the same printing error\")](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed models with",
"error\")](https://i.stack.imgur.com/zmV36.jpg \"Photo of three printed models with the same printing"
] |
[
"to bind them together. Perhaps even some edge contours so",
"(as I can attest to myself having to replace my",
"4 years) I don't want ABS since I have horrible",
"I did not find anything of particular use when searching",
"\"3D print load-bearing\" on this site and similar with Google",
"find anything of particular use when searching for \"3D print",
"supports approximately 200 cm apart. I was looking into WPC",
"build me a small support wall 250x80 cm mounted on",
"I may be able to make it functional AND pretty",
"even a viable idea? The filament type needs a bit",
"able to handle the weight of the soil I would",
"3 - 4 years) I don't want ABS since I",
"myself having to replace my flag pole holder every 3",
"may be able to make it functional AND pretty with",
"I read that PLA will become brittle with time (as",
"it hit me that I may be able to make",
"whether the board will be able to handle the weight",
"don't know how to calculate the strength of such a",
"edge contours so that they fit perfectly. But, my problem",
"all three directions, through which I would then hammer in",
"soil I would shovel behind it, if at all. My",
"they fit perfectly. But, my problem is that I don't",
"a small support wall 250x80 cm mounted on two metal",
"to myself having to replace my flag pole holder every",
"know how to calculate the strength of such a solution",
"is PETG since I read that PLA will become brittle",
"to handle the weight of the soil I would shovel",
"all. My current design proposal is to make a hexagon",
"would have cylinder cutouts in all three directions, through which",
"three directions, through which I would then hammer in cylinders",
"my problem is that I don't know how to calculate",
"200 cm apart. I was looking into WPC (Wood Plastic",
"attest to myself having to replace my flag pole holder",
"pole holder every 3 - 4 years) I don't want",
"problem is that I don't know how to calculate the",
"Is this even a viable idea? The filament type needs",
"My current proposal is PETG since I read that PLA",
"how to calculate the strength of such a solution (or",
"in all three directions, through which I would then hammer",
"not find anything of particular use when searching for \"3D",
"3D printer (Prusa MK3S + MMU2). However, I have zero",
"handle the weight of the soil I would shovel behind",
"into WPC (Wood Plastic Composite) boards and then it hit",
"this even a viable idea? The filament type needs a",
"hammer in cylinders to bind them together. Perhaps even some",
"current proposal is PETG since I read that PLA will",
"I need to build me a small support wall 250x80",
"calculate the strength of such a solution (or any other).",
"apart. I was looking into WPC (Wood Plastic Composite) boards",
"is that I don't know how to calculate the strength",
"support wall 250x80 cm mounted on two metal supports approximately",
"shovel behind it, if at all. My current design proposal",
"filament type needs a bit more explanation: My current proposal",
"years) I don't want ABS since I have horrible experience",
"explanation: My current proposal is PETG since I read that",
"want ABS since I have horrible experience printing it. I",
"a viable idea? The filament type needs a bit more",
"MMU2). However, I have zero idea on how to calculate",
"hexagon mesh of PETG filament. The hexagons would have cylinder",
"needs a bit more explanation: My current proposal is PETG",
"directions, through which I would then hammer in cylinders to",
"that I may be able to make it functional AND",
"+ MMU2). However, I have zero idea on how to",
"will become brittle with time (as I can attest to",
"which I would then hammer in cylinders to bind them",
"cm mounted on two metal supports approximately 200 cm apart.",
"proposal is to make a hexagon mesh of PETG filament.",
"make a hexagon mesh of PETG filament. The hexagons would",
"approximately 200 cm apart. I was looking into WPC (Wood",
"I can attest to myself having to replace my flag",
"if at all. My current design proposal is to make",
"other). Is this even a viable idea? The filament type",
"PETG since I read that PLA will become brittle with",
"did not find anything of particular use when searching for",
"I don't know how to calculate the strength of such",
"cm apart. I was looking into WPC (Wood Plastic Composite)",
"was looking into WPC (Wood Plastic Composite) boards and then",
"to make a hexagon mesh of PETG filament. The hexagons",
"brittle with time (as I can attest to myself having",
"will be able to handle the weight of the soil",
"looking into WPC (Wood Plastic Composite) boards and then it",
"have zero idea on how to calculate whether the board",
"time (as I can attest to myself having to replace",
"cutouts in all three directions, through which I would then",
"any other). Is this even a viable idea? The filament",
"particular use when searching for \"3D print load-bearing\" on this",
"(Prusa MK3S + MMU2). However, I have zero idea on",
"in cylinders to bind them together. Perhaps even some edge",
"(Wood Plastic Composite) boards and then it hit me that",
"bind them together. Perhaps even some edge contours so that",
"I would shovel behind it, if at all. My current",
"then hammer in cylinders to bind them together. Perhaps even",
"me a small support wall 250x80 cm mounted on two",
"mesh of PETG filament. The hexagons would have cylinder cutouts",
"the weight of the soil I would shovel behind it,",
"the strength of such a solution (or any other). Is",
"I don't want ABS since I have horrible experience printing",
"boards and then it hit me that I may be",
"that they fit perfectly. But, my problem is that I",
"is to make a hexagon mesh of PETG filament. The",
"bit more explanation: My current proposal is PETG since I",
"Composite) boards and then it hit me that I may",
"then it hit me that I may be able to",
"fit perfectly. But, my problem is that I don't know",
"(or any other). Is this even a viable idea? The",
"use when searching for \"3D print load-bearing\" on this site",
"PETG filament. The hexagons would have cylinder cutouts in all",
"it, if at all. My current design proposal is to",
"it. I did not find anything of particular use when",
"the soil I would shovel behind it, if at all.",
"would shovel behind it, if at all. My current design",
"filament. The hexagons would have cylinder cutouts in all three",
"My current design proposal is to make a hexagon mesh",
"a solution (or any other). Is this even a viable",
"behind it, if at all. My current design proposal is",
"I have zero idea on how to calculate whether the",
"The filament type needs a bit more explanation: My current",
"functional AND pretty with my 3D printer (Prusa MK3S +",
"I was looking into WPC (Wood Plastic Composite) boards and",
"flag pole holder every 3 - 4 years) I don't",
"a hexagon mesh of PETG filament. The hexagons would have",
"them together. Perhaps even some edge contours so that they",
"cylinders to bind them together. Perhaps even some edge contours",
"solution (or any other). Is this even a viable idea?",
"current design proposal is to make a hexagon mesh of",
"experience printing it. I did not find anything of particular",
"weight of the soil I would shovel behind it, if",
"Plastic Composite) boards and then it hit me that I",
"that PLA will become brittle with time (as I can",
"of the soil I would shovel behind it, if at",
"anything of particular use when searching for \"3D print load-bearing\"",
"proposal is PETG since I read that PLA will become",
"of PETG filament. The hexagons would have cylinder cutouts in",
"with time (as I can attest to myself having to",
"I have horrible experience printing it. I did not find",
"how to calculate whether the board will be able to",
"read that PLA will become brittle with time (as I",
"to calculate the strength of such a solution (or any",
"when searching for \"3D print load-bearing\" on this site and",
"such a solution (or any other). Is this even a",
"able to make it functional AND pretty with my 3D",
"make it functional AND pretty with my 3D printer (Prusa",
"on two metal supports approximately 200 cm apart. I was",
"me that I may be able to make it functional",
"replace my flag pole holder every 3 - 4 years)",
"horrible experience printing it. I did not find anything of",
"even some edge contours so that they fit perfectly. But,",
"to make it functional AND pretty with my 3D printer",
"two metal supports approximately 200 cm apart. I was looking",
"wall 250x80 cm mounted on two metal supports approximately 200",
"contours so that they fit perfectly. But, my problem is",
"more explanation: My current proposal is PETG since I read",
"with my 3D printer (Prusa MK3S + MMU2). However, I",
"The hexagons would have cylinder cutouts in all three directions,",
"calculate whether the board will be able to handle the",
"printing it. I did not find anything of particular use",
"small support wall 250x80 cm mounted on two metal supports",
"idea on how to calculate whether the board will be",
"to calculate whether the board will be able to handle",
"type needs a bit more explanation: My current proposal is",
"holder every 3 - 4 years) I don't want ABS",
"be able to handle the weight of the soil I",
"would then hammer in cylinders to bind them together. Perhaps",
"perfectly. But, my problem is that I don't know how",
"mounted on two metal supports approximately 200 cm apart. I",
"to build me a small support wall 250x80 cm mounted",
"be able to make it functional AND pretty with my",
"cylinder cutouts in all three directions, through which I would",
"that I don't know how to calculate the strength of",
"on how to calculate whether the board will be able",
"viable idea? The filament type needs a bit more explanation:",
"having to replace my flag pole holder every 3 -",
"AND pretty with my 3D printer (Prusa MK3S + MMU2).",
"print load-bearing\" on this site and similar with Google searches...",
"MK3S + MMU2). However, I have zero idea on how",
"need to build me a small support wall 250x80 cm",
"PLA will become brittle with time (as I can attest",
"Perhaps even some edge contours so that they fit perfectly.",
"my 3D printer (Prusa MK3S + MMU2). However, I have",
"zero idea on how to calculate whether the board will",
"metal supports approximately 200 cm apart. I was looking into",
"I would then hammer in cylinders to bind them together.",
"of such a solution (or any other). Is this even",
"250x80 cm mounted on two metal supports approximately 200 cm",
"and then it hit me that I may be able",
"can attest to myself having to replace my flag pole",
"pretty with my 3D printer (Prusa MK3S + MMU2). However,",
"for \"3D print load-bearing\" on this site and similar with",
"have cylinder cutouts in all three directions, through which I",
"idea? The filament type needs a bit more explanation: My",
"since I read that PLA will become brittle with time",
"of particular use when searching for \"3D print load-bearing\" on",
"since I have horrible experience printing it. I did not",
"board will be able to handle the weight of the",
"become brittle with time (as I can attest to myself",
"hit me that I may be able to make it",
"WPC (Wood Plastic Composite) boards and then it hit me",
"a bit more explanation: My current proposal is PETG since",
"However, I have zero idea on how to calculate whether",
"- 4 years) I don't want ABS since I have",
"hexagons would have cylinder cutouts in all three directions, through",
"so that they fit perfectly. But, my problem is that",
"through which I would then hammer in cylinders to bind",
"But, my problem is that I don't know how to",
"every 3 - 4 years) I don't want ABS since",
"my flag pole holder every 3 - 4 years) I",
"to replace my flag pole holder every 3 - 4",
"have horrible experience printing it. I did not find anything",
"searching for \"3D print load-bearing\" on this site and similar",
"the board will be able to handle the weight of",
"together. Perhaps even some edge contours so that they fit",
"it functional AND pretty with my 3D printer (Prusa MK3S",
"printer (Prusa MK3S + MMU2). However, I have zero idea",
"at all. My current design proposal is to make a",
"strength of such a solution (or any other). Is this",
"some edge contours so that they fit perfectly. But, my",
"ABS since I have horrible experience printing it. I did",
"don't want ABS since I have horrible experience printing it.",
"design proposal is to make a hexagon mesh of PETG"
] |
[
"model\") [![Photo of a calibration cube with a printing error",
"of a 3D printed rabbit model with a printing error",
"rabbit model with a printing error partway up the model\")](https://i.stack.imgur.com/yMDo8.jpg",
"printing error partway up the model](https://i.stack.imgur.com/yMDo8.jpg \"Photo of a 3D",
"[![Photo of a 3D printed rabbit model with a printing",
"Cura. A few minor tweaks to Layer Height and Start",
"minor tweaks to Layer Height and Start temps. I've done",
"the model](https://i.stack.imgur.com/SxbEa.jpg \"Photo of a calibration cube with a printing",
"done a few prints using fairly stock settings out of",
"Start temps. I've done some research but can't really find",
"If someone can give me some insight, that would be",
"a printing error partway up the model\")](https://i.stack.imgur.com/SxbEa.jpg \"Photo of a",
"Layer Height and Start temps. I've done some research but",
"error partway up the model\") [![Photo of a calibration cube",
"calibration cube with a printing error partway up the model](https://i.stack.imgur.com/SxbEa.jpg",
"a printing error partway up the model](https://i.stack.imgur.com/SxbEa.jpg \"Photo of a",
"the model\")](https://i.stack.imgur.com/SxbEa.jpg \"Photo of a calibration cube with a printing",
"partway up the model](https://i.stack.imgur.com/yMDo8.jpg \"Photo of a 3D printed rabbit",
"fairly stock settings out of Cura. A few minor tweaks",
"using fairly stock settings out of Cura. A few minor",
"with a printing error partway up the model\") [![Photo of",
"printing error partway up the model](https://i.stack.imgur.com/SxbEa.jpg \"Photo of a calibration",
"a few prints using fairly stock settings out of Cura.",
"up the model](https://i.stack.imgur.com/SxbEa.jpg \"Photo of a calibration cube with a",
"up the model\")](https://i.stack.imgur.com/SxbEa.jpg \"Photo of a calibration cube with a",
"printed rabbit model with a printing error partway up the",
"I just got an Ender 3 S1 Pro and I've",
"model](https://i.stack.imgur.com/SxbEa.jpg \"Photo of a calibration cube with a printing error",
"3D printed rabbit model with a printing error partway up",
"helpful. [![Photo of a 3D printed rabbit model with a",
"rabbit model with a printing error partway up the model\")",
"model with a printing error partway up the model\") [![Photo",
"up the model\")](https://i.stack.imgur.com/yMDo8.jpg \"Photo of a 3D printed rabbit model",
"up the model](https://i.stack.imgur.com/yMDo8.jpg \"Photo of a 3D printed rabbit model",
"with a printing error partway up the model\")](https://i.stack.imgur.com/SxbEa.jpg \"Photo of",
"the model\")](https://i.stack.imgur.com/yMDo8.jpg \"Photo of a 3D printed rabbit model with",
"partway up the model](https://i.stack.imgur.com/SxbEa.jpg \"Photo of a calibration cube with",
"very helpful. [![Photo of a 3D printed rabbit model with",
"a 3D printed rabbit model with a printing error partway",
"printing error partway up the model\")](https://i.stack.imgur.com/yMDo8.jpg \"Photo of a 3D",
"partway up the model\")](https://i.stack.imgur.com/SxbEa.jpg \"Photo of a calibration cube with",
"with a printing error partway up the model](https://i.stack.imgur.com/SxbEa.jpg \"Photo of",
"find an example of this issue. If someone can give",
"out of Cura. A few minor tweaks to Layer Height",
"Pro and I've done a few prints using fairly stock",
"to Layer Height and Start temps. I've done some research",
"and Start temps. I've done some research but can't really",
"rabbit model with a printing error partway up the model](https://i.stack.imgur.com/yMDo8.jpg",
"a calibration cube with a printing error partway up the",
"Ender 3 S1 Pro and I've done a few prints",
"an example of this issue. If someone can give me",
"few prints using fairly stock settings out of Cura. A",
"with a printing error partway up the model\")](https://i.stack.imgur.com/yMDo8.jpg \"Photo of",
"temps. I've done some research but can't really find an",
"model\")](https://i.stack.imgur.com/yMDo8.jpg \"Photo of a 3D printed rabbit model with a",
"give me some insight, that would be very helpful. [![Photo",
"error partway up the model\")](https://i.stack.imgur.com/SxbEa.jpg \"Photo of a calibration cube",
"the model](https://i.stack.imgur.com/yMDo8.jpg \"Photo of a 3D printed rabbit model with",
"a printing error partway up the model\")](https://i.stack.imgur.com/yMDo8.jpg \"Photo of a",
"printing error partway up the model\") [![Photo of a calibration",
"partway up the model\") [![Photo of a calibration cube with",
"and I've done a few prints using fairly stock settings",
"partway up the model\")](https://i.stack.imgur.com/yMDo8.jpg \"Photo of a 3D printed rabbit",
"3 S1 Pro and I've done a few prints using",
"some research but can't really find an example of this",
"that would be very helpful. [![Photo of a 3D printed",
"the model\") [![Photo of a calibration cube with a printing",
"calibration cube with a printing error partway up the model\")",
"just got an Ender 3 S1 Pro and I've done",
"cube with a printing error partway up the model\")](https://i.stack.imgur.com/SxbEa.jpg \"Photo",
"of a calibration cube with a printing error partway up",
"this issue. If someone can give me some insight, that",
"tweaks to Layer Height and Start temps. I've done some",
"can give me some insight, that would be very helpful.",
"someone can give me some insight, that would be very",
"model with a printing error partway up the model\")](https://i.stack.imgur.com/yMDo8.jpg \"Photo",
"\"Photo of a 3D printed rabbit model with a printing",
"some insight, that would be very helpful. [![Photo of a",
"research but can't really find an example of this issue.",
"done some research but can't really find an example of",
"up the model\") [![Photo of a calibration cube with a",
"insight, that would be very helpful. [![Photo of a 3D",
"\"Photo of a calibration cube with a printing error partway",
"calibration cube with a printing error partway up the model\")](https://i.stack.imgur.com/SxbEa.jpg",
"got an Ender 3 S1 Pro and I've done a",
"me some insight, that would be very helpful. [![Photo of",
"example of this issue. If someone can give me some",
"be very helpful. [![Photo of a 3D printed rabbit model",
"error partway up the model\")](https://i.stack.imgur.com/yMDo8.jpg \"Photo of a 3D printed",
"model with a printing error partway up the model](https://i.stack.imgur.com/yMDo8.jpg \"Photo",
"settings out of Cura. A few minor tweaks to Layer",
"issue. If someone can give me some insight, that would",
"would be very helpful. [![Photo of a 3D printed rabbit",
"error partway up the model](https://i.stack.imgur.com/SxbEa.jpg \"Photo of a calibration cube",
"with a printing error partway up the model](https://i.stack.imgur.com/yMDo8.jpg \"Photo of",
"cube with a printing error partway up the model](https://i.stack.imgur.com/SxbEa.jpg \"Photo",
"A few minor tweaks to Layer Height and Start temps.",
"I've done some research but can't really find an example",
"error partway up the model](https://i.stack.imgur.com/yMDo8.jpg \"Photo of a 3D printed",
"a printing error partway up the model\") [![Photo of a",
"of this issue. If someone can give me some insight,",
"model\")](https://i.stack.imgur.com/SxbEa.jpg \"Photo of a calibration cube with a printing error",
"model](https://i.stack.imgur.com/yMDo8.jpg \"Photo of a 3D printed rabbit model with a",
"an Ender 3 S1 Pro and I've done a few",
"really find an example of this issue. If someone can",
"[![Photo of a calibration cube with a printing error partway",
"prints using fairly stock settings out of Cura. A few",
"stock settings out of Cura. A few minor tweaks to",
"Height and Start temps. I've done some research but can't",
"few minor tweaks to Layer Height and Start temps. I've",
"I've done a few prints using fairly stock settings out",
"can't really find an example of this issue. If someone",
"S1 Pro and I've done a few prints using fairly",
"but can't really find an example of this issue. If",
"of Cura. A few minor tweaks to Layer Height and",
"printing error partway up the model\")](https://i.stack.imgur.com/SxbEa.jpg \"Photo of a calibration",
"a printing error partway up the model](https://i.stack.imgur.com/yMDo8.jpg \"Photo of a"
] |
[
"photo are super straight and fine. Are they called \"stringing\"",
"I experience some lines on my prints. However, I would",
"them? Specs: * Printer: Kobra Max * Nozzle: 200 °C",
"bed with faint filament lines that don't look like part",
"of the printed model\")](https://i.stack.imgur.com/W0uJF.png \"Photo of print bed with faint",
"lines that you see in my photo are super straight",
"Filament: GiantArm PLA [![Photo of print bed with faint filament",
"lines on my prints. However, I would not really call",
"an undefined spider web. But the lines that you see",
"Are they called \"stringing\" too? And how do I get",
"seen some stringing and it was rather like an undefined",
"called \"stringing\" too? And how do I get rid of",
"have seen some stringing and it was rather like an",
"°C * Bed: 50 °C * Filament: GiantArm PLA [![Photo",
"prints. However, I would not really call them \"stringing\". I",
"you see in my photo are super straight and fine.",
"Max * Nozzle: 200 °C * Bed: 50 °C *",
"I have seen some stringing and it was rather like",
"lines that don't look like part of the printed model\")",
"part of the printed model ](https://i.stack.imgur.com/W0uJF.png \"Photo of print bed",
"that you see in my photo are super straight and",
"\"stringing\" too? And how do I get rid of them?",
"with faint filament lines that don't look like part of",
"that don't look like part of the printed model\")](https://i.stack.imgur.com/W0uJF.png \"Photo",
"I get rid of them? Specs: * Printer: Kobra Max",
"like an undefined spider web. But the lines that you",
"really call them \"stringing\". I have seen some stringing and",
"on my prints. However, I would not really call them",
"would not really call them \"stringing\". I have seen some",
"some stringing and it was rather like an undefined spider",
"Specs: * Printer: Kobra Max * Nozzle: 200 °C *",
"in my photo are super straight and fine. Are they",
"do I get rid of them? Specs: * Printer: Kobra",
"printed model ](https://i.stack.imgur.com/W0uJF.png \"Photo of print bed with faint filament",
"I would not really call them \"stringing\". I have seen",
"PLA [![Photo of print bed with faint filament lines that",
"50 °C * Filament: GiantArm PLA [![Photo of print bed",
"stringing and it was rather like an undefined spider web.",
"spider web. But the lines that you see in my",
"the lines that you see in my photo are super",
"printed model\")](https://i.stack.imgur.com/W0uJF.png \"Photo of print bed with faint filament lines",
"* Nozzle: 200 °C * Bed: 50 °C * Filament:",
"of print bed with faint filament lines that don't look",
"how do I get rid of them? Specs: * Printer:",
"my photo are super straight and fine. Are they called",
"the printed model ](https://i.stack.imgur.com/W0uJF.png \"Photo of print bed with faint",
"are super straight and fine. Are they called \"stringing\" too?",
"](https://i.stack.imgur.com/W0uJF.png \"Photo of print bed with faint filament lines that",
"experience some lines on my prints. However, I would not",
"But the lines that you see in my photo are",
"lines that don't look like part of the printed model\")](https://i.stack.imgur.com/W0uJF.png",
"look like part of the printed model\")](https://i.stack.imgur.com/W0uJF.png \"Photo of print",
"200 °C * Bed: 50 °C * Filament: GiantArm PLA",
"see in my photo are super straight and fine. Are",
"Bed: 50 °C * Filament: GiantArm PLA [![Photo of print",
"Nozzle: 200 °C * Bed: 50 °C * Filament: GiantArm",
"GiantArm PLA [![Photo of print bed with faint filament lines",
"* Bed: 50 °C * Filament: GiantArm PLA [![Photo of",
"And how do I get rid of them? Specs: *",
"not really call them \"stringing\". I have seen some stringing",
"rid of them? Specs: * Printer: Kobra Max * Nozzle:",
"like part of the printed model ](https://i.stack.imgur.com/W0uJF.png \"Photo of print",
"them \"stringing\". I have seen some stringing and it was",
"it was rather like an undefined spider web. But the",
"don't look like part of the printed model\")](https://i.stack.imgur.com/W0uJF.png \"Photo of",
"look like part of the printed model ](https://i.stack.imgur.com/W0uJF.png \"Photo of",
"and it was rather like an undefined spider web. But",
"\"stringing\". I have seen some stringing and it was rather",
"and fine. Are they called \"stringing\" too? And how do",
"\"Photo of print bed with faint filament lines that don't",
"web. But the lines that you see in my photo",
"get rid of them? Specs: * Printer: Kobra Max *",
"part of the printed model\")](https://i.stack.imgur.com/W0uJF.png \"Photo of print bed with",
"super straight and fine. Are they called \"stringing\" too? And",
"undefined spider web. But the lines that you see in",
"* Printer: Kobra Max * Nozzle: 200 °C * Bed:",
"However, I would not really call them \"stringing\". I have",
"they called \"stringing\" too? And how do I get rid",
"faint filament lines that don't look like part of the",
"model\")](https://i.stack.imgur.com/W0uJF.png \"Photo of print bed with faint filament lines that",
"of the printed model ](https://i.stack.imgur.com/W0uJF.png \"Photo of print bed with",
"°C * Filament: GiantArm PLA [![Photo of print bed with",
"of them? Specs: * Printer: Kobra Max * Nozzle: 200",
"fine. Are they called \"stringing\" too? And how do I",
"some lines on my prints. However, I would not really",
"my prints. However, I would not really call them \"stringing\".",
"the printed model\")](https://i.stack.imgur.com/W0uJF.png \"Photo of print bed with faint filament",
"rather like an undefined spider web. But the lines that",
"lines that don't look like part of the printed model",
"too? And how do I get rid of them? Specs:",
"straight and fine. Are they called \"stringing\" too? And how",
"Printer: Kobra Max * Nozzle: 200 °C * Bed: 50",
"like part of the printed model\")](https://i.stack.imgur.com/W0uJF.png \"Photo of print bed",
"model ](https://i.stack.imgur.com/W0uJF.png \"Photo of print bed with faint filament lines",
"Kobra Max * Nozzle: 200 °C * Bed: 50 °C",
"call them \"stringing\". I have seen some stringing and it",
"was rather like an undefined spider web. But the lines",
"* Filament: GiantArm PLA [![Photo of print bed with faint",
"filament lines that don't look like part of the printed",
"print bed with faint filament lines that don't look like",
"that don't look like part of the printed model ](https://i.stack.imgur.com/W0uJF.png",
"don't look like part of the printed model ](https://i.stack.imgur.com/W0uJF.png \"Photo",
"[![Photo of print bed with faint filament lines that don't"
] |
[
"Did I do anything wrong is is this an issue",
"do anything wrong is is this an issue among all",
"and I pause the print, the extruder lets out more",
"the print. I don't think I did anything wrong on",
"ruins the print. I don't think I did anything wrong",
"am 3D printing on my Ender 3, and I pause",
"clips. However, another problem remains. Once the glob is made,",
"be that the extruder doesn't stop in time? Did I",
"in time? Did I do anything wrong is is this",
"out more filament for like 2 seconds. This leaves a",
"this an issue among all Ender 3s? * I use",
"slide the build platform. I have fixed the build platform",
"If I am 3D printing on my Ender 3, and",
"could contact the nozzle tip, causing it to slide the",
"up, making the print not be even, which ruins the",
"the extruder doesn't stop in time? Did I do anything",
"for like 2 seconds. This leaves a glob of dry",
"I pause the print, the extruder lets out more filament",
"the setup, but it might just be that the extruder",
"seconds. This leaves a glob of dry filament on my",
"the print not be even, which ruins the print. I",
"even, which ruins the print. I don't think I did",
"I have fixed the build platform sliding problem by attaching",
"setup, but it might just be that the extruder doesn't",
"I did anything wrong on the setup, but it might",
"just be that the extruder doesn't stop in time? Did",
"made, the filament dropped on top of it gets pushed",
"wrong is is this an issue among all Ender 3s?",
"it might just be that the extruder doesn't stop in",
"the included clips. However, another problem remains. Once the glob",
"pause the print, the extruder lets out more filament for",
"build platform. I have fixed the build platform sliding problem",
"3D printing on my Ender 3, and I pause the",
"print, the extruder lets out more filament for like 2",
"I am 3D printing on my Ender 3, and I",
"This leaves a glob of dry filament on my print,",
"gets pushed up, making the print not be even, which",
"lets out more filament for like 2 seconds. This leaves",
"don't think I did anything wrong on the setup, but",
"it gets pushed up, making the print not be even,",
"not be even, which ruins the print. I don't think",
"is this an issue among all Ender 3s? * I",
"the build platform. I have fixed the build platform sliding",
"by attaching the included clips. However, another problem remains. Once",
"dropped on top of it gets pushed up, making the",
"my print, which the could contact the nozzle tip, causing",
"on my Ender 3, and I pause the print, the",
"print, which the could contact the nozzle tip, causing it",
"Ender 3, and I pause the print, the extruder lets",
"print. I don't think I did anything wrong on the",
"on the setup, but it might just be that the",
"making the print not be even, which ruins the print.",
"did anything wrong on the setup, but it might just",
"extruder lets out more filament for like 2 seconds. This",
"sliding problem by attaching the included clips. However, another problem",
"doesn't stop in time? Did I do anything wrong is",
"which the could contact the nozzle tip, causing it to",
"more filament for like 2 seconds. This leaves a glob",
"glob is made, the filament dropped on top of it",
"the extruder lets out more filament for like 2 seconds.",
"platform. I have fixed the build platform sliding problem by",
"contact the nozzle tip, causing it to slide the build",
"among all Ender 3s? * I use the Creality Ender",
"the nozzle tip, causing it to slide the build platform.",
"I do anything wrong is is this an issue among",
"my Ender 3, and I pause the print, the extruder",
"problem by attaching the included clips. However, another problem remains.",
"issue among all Ender 3s? * I use the Creality",
"included clips. However, another problem remains. Once the glob is",
"stop in time? Did I do anything wrong is is",
"but it might just be that the extruder doesn't stop",
"a glob of dry filament on my print, which the",
"print not be even, which ruins the print. I don't",
"anything wrong on the setup, but it might just be",
"filament for like 2 seconds. This leaves a glob of",
"on my print, which the could contact the nozzle tip,",
"have fixed the build platform sliding problem by attaching the",
"the build platform sliding problem by attaching the included clips.",
"is is this an issue among all Ender 3s? *",
"Once the glob is made, the filament dropped on top",
"another problem remains. Once the glob is made, the filament",
"anything wrong is is this an issue among all Ender",
"an issue among all Ender 3s? * I use the",
"dry filament on my print, which the could contact the",
"which ruins the print. I don't think I did anything",
"that the extruder doesn't stop in time? Did I do",
"the could contact the nozzle tip, causing it to slide",
"However, another problem remains. Once the glob is made, the",
"printing on my Ender 3, and I pause the print,",
"tip, causing it to slide the build platform. I have",
"filament on my print, which the could contact the nozzle",
"build platform sliding problem by attaching the included clips. However,",
"the print, the extruder lets out more filament for like",
"nozzle tip, causing it to slide the build platform. I",
"it to slide the build platform. I have fixed the",
"like 2 seconds. This leaves a glob of dry filament",
"on top of it gets pushed up, making the print",
"of it gets pushed up, making the print not be",
"extruder doesn't stop in time? Did I do anything wrong",
"to slide the build platform. I have fixed the build",
"3, and I pause the print, the extruder lets out",
"attaching the included clips. However, another problem remains. Once the",
"filament dropped on top of it gets pushed up, making",
"pushed up, making the print not be even, which ruins",
"I don't think I did anything wrong on the setup,",
"remains. Once the glob is made, the filament dropped on",
"might just be that the extruder doesn't stop in time?",
"top of it gets pushed up, making the print not",
"wrong on the setup, but it might just be that",
"causing it to slide the build platform. I have fixed",
"2 seconds. This leaves a glob of dry filament on",
"leaves a glob of dry filament on my print, which",
"time? Did I do anything wrong is is this an",
"glob of dry filament on my print, which the could",
"platform sliding problem by attaching the included clips. However, another",
"fixed the build platform sliding problem by attaching the included",
"of dry filament on my print, which the could contact",
"think I did anything wrong on the setup, but it",
"the filament dropped on top of it gets pushed up,",
"problem remains. Once the glob is made, the filament dropped",
"all Ender 3s? * I use the Creality Ender 3",
"be even, which ruins the print. I don't think I",
"the glob is made, the filament dropped on top of",
"is made, the filament dropped on top of it gets"
] |
[
"and won't finish the figure. It will basically just go",
"print. I added some caltrops on the base but when",
"image description here](https://i.stack.imgur.com/gIME4.jpg)](https://i.stack.imgur.com/gIME4.jpg) Here's an example of something similar happening",
"to print. I added some caltrops on the base but",
"here](https://i.stack.imgur.com/gIME4.jpg)](https://i.stack.imgur.com/gIME4.jpg) Here's an example of something similar happening to Pikachu's",
"This is the mockup and afterwards is basically where it",
"I go to print the figure, my Ender3 won't finish",
"something similar happening to Pikachu's ears. [](https://i.stack.imgur.com/MAR24.jpg)",
"that actually does print. [](https://i.stack.imgur.com/UWp3p.png) [](https://i.stack.imgur.com/UWp3p.png)",
"some caltrops on the base but when I go to",
"print the figure, my Ender3 won't finish the caltrops/smaller items",
"3d Printer. I have a model from Hero Forge I'm",
"and afterwards is basically where it stops and the filament",
"lol. Here's an example of it happening on the base",
"or the nozzle moves around the filament that actually does",
"I have the Ender3 3d Printer. I have a model",
"Pretty new to 3d Printing. Ultimaker Cura as my Slicer.",
"the caltrops/smaller items and won't finish the figure. It will",
"won't finish the figure. It will basically just go through",
"actually does print. [](https://i.stack.imgur.com/UWp3p.png) [](https://i.stack.imgur.com/UWp3p.png) [](https://i.stack.imgur.com/gIME4.jpg) Here's an",
"to 3d Printing. Ultimaker Cura as my Slicer. I have",
"the motions lol. Here's an example of it happening on",
"my Figure. This is the mockup and afterwards is basically",
"figure, my Ender3 won't finish the caltrops/smaller items and won't",
"Ultimaker Cura as my Slicer. I have the Ender3 3d",
"Cura as my Slicer. I have the Ender3 3d Printer.",
"motions lol. Here's an example of it happening on the",
"Ender3 3d Printer. I have a model from Hero Forge",
"[](https://i.stack.imgur.com/gIME4.jpg) Here's an example of something similar",
"basically where it stops and the filament either just stops",
"on the base but when I go to print the",
"the Ender3 3d Printer. I have a model from Hero",
"is the mockup and afterwards is basically where it stops",
"the mockup and afterwards is basically where it stops and",
"an example of it happening on the base of my",
"out or the nozzle moves around the filament that actually",
"of something similar happening to Pikachu's ears. [](https://i.stack.imgur.com/gIME4.jpg) Here's an example of something similar happening to",
"3d Printing. Ultimaker Cura as my Slicer. I have the",
"from Hero Forge I'm trying to print. I added some",
"base of my Figure. This is the mockup and afterwards",
"through the motions lol. Here's an example of it happening",
"items and won't finish the figure. It will basically just",
"it happening on the base of my Figure. This is",
"mockup and afterwards is basically where it stops and the",
"the base but when I go to print the figure,",
"just stops coming out or the nozzle moves around the",
"the figure. It will basically just go through the motions",
"filament that actually does print. [](https://i.stack.imgur.com/UWp3p.png) [](https://i.stack.imgur.com/UWp3p.png) [](https://i.stack.imgur.com/gIME4.jpg) Here's an example",
"added some caltrops on the base but when I go",
"stops and the filament either just stops coming out or",
"Here's an example of something similar happening to Pikachu's ears.",
"where it stops and the filament either just stops coming",
"but when I go to print the figure, my Ender3",
"Printing. Ultimaker Cura as my Slicer. I have the Ender3",
"my Slicer. I have the Ender3 3d Printer. I have",
"I added some caltrops on the base but when I",
"either just stops coming out or the nozzle moves around",
"is basically where it stops and the filament either just",
"finish the caltrops/smaller items and won't finish the figure. It",
"coming out or the nozzle moves around the filament that",
"it stops and the filament either just stops coming out",
"moves around the filament that actually does print. [](https://i.stack.imgur.com/UWp3p.png) [](https://i.stack.imgur.com/gIME4.jpg) Here's an example of something",
"have the Ender3 3d Printer. I have a model from",
"figure. It will basically just go through the motions lol.",
"of it happening on the base of my Figure. This",
"basically just go through the motions lol. Here's an example",
"on the base of my Figure. This is the mockup",
"Printer. I have a model from Hero Forge I'm trying",
"I'm trying to print. I added some caltrops on the",
"does print. [](https://i.stack.imgur.com/UWp3p.png) [](https://i.stack.imgur.com/gIME4.jpg)",
"print. [](https://i.stack.imgur.com/UWp3p.png) [](https://i.stack.imgur.com/gIME4.jpg) Here's",
"as my Slicer. I have the Ender3 3d Printer. I",
"a model from Hero Forge I'm trying to print. I",
"Ender3 won't finish the caltrops/smaller items and won't finish the",
"Here's an example of it happening on the base of",
"my Ender3 won't finish the caltrops/smaller items and won't finish",
"have a model from Hero Forge I'm trying to print.",
"description here](https://i.stack.imgur.com/UWp3p.png)](https://i.stack.imgur.com/UWp3p.png) [](https://i.stack.imgur.com/gIME4.jpg) Here's an example of",
"Slicer. I have the Ender3 3d Printer. I have a",
"an example of something similar happening to Pikachu's ears. [![enter",
"filament either just stops coming out or the nozzle moves"
] |
[
"Modelling) is not possible with metals? Has anyone attempted any",
"FDM (Fuse Deposition Modelling) is not possible with metals? Has",
"some light in why FDM (Fuse Deposition Modelling) is not",
"possible with metals? Has anyone attempted any experiments with it?",
"someone shed some light in why FDM (Fuse Deposition Modelling)",
"in why FDM (Fuse Deposition Modelling) is not possible with",
"why FDM (Fuse Deposition Modelling) is not possible with metals?",
"Can someone shed some light in why FDM (Fuse Deposition",
"light in why FDM (Fuse Deposition Modelling) is not possible",
"is not possible with metals? Has anyone attempted any experiments",
"(Fuse Deposition Modelling) is not possible with metals? Has anyone",
"not possible with metals? Has anyone attempted any experiments with",
"shed some light in why FDM (Fuse Deposition Modelling) is",
"Deposition Modelling) is not possible with metals? Has anyone attempted"
] |
[
"a glass state for any reason? Is the transition of",
"liquid for extrusion without any real regard for the glass",
"than that, does the extruder keep ex:PLA in a glass",
"of FFF 3D printing, the glass state is usually used",
"does the extruder keep ex:PLA in a glass state for",
"adhesion. Other than that, does the extruder keep ex:PLA in",
"FFF 3D printing, the glass state is usually used to",
"glass state for any reason? Is the transition of the",
"to heat the bed for better first layer adhesion. Other",
"printing, the glass state is usually used to heat the",
"in a glass state for any reason? Is the transition",
"layer adhesion. Other than that, does the extruder keep ex:PLA",
"the glass state is usually used to heat the bed",
"better first layer adhesion. Other than that, does the extruder",
"keep ex:PLA in a glass state for any reason? Is",
"straight from solid to liquid for extrusion without any real",
"any reason? Is the transition of the filament straight from",
"filament straight from solid to liquid for extrusion without any",
"ex:PLA in a glass state for any reason? Is the",
"the filament straight from solid to liquid for extrusion without",
"first layer adhesion. Other than that, does the extruder keep",
"reason? Is the transition of the filament straight from solid",
"understanding of FFF 3D printing, the glass state is usually",
"solid to liquid for extrusion without any real regard for",
"heat the bed for better first layer adhesion. Other than",
"is usually used to heat the bed for better first",
"Other than that, does the extruder keep ex:PLA in a",
"the transition of the filament straight from solid to liquid",
"of the filament straight from solid to liquid for extrusion",
"to liquid for extrusion without any real regard for the",
"bed for better first layer adhesion. Other than that, does",
"from solid to liquid for extrusion without any real regard",
"used to heat the bed for better first layer adhesion.",
"for extrusion without any real regard for the glass state?",
"extruder keep ex:PLA in a glass state for any reason?",
"usually used to heat the bed for better first layer",
"that, does the extruder keep ex:PLA in a glass state",
"transition of the filament straight from solid to liquid for",
"From my understanding of FFF 3D printing, the glass state",
"Is the transition of the filament straight from solid to",
"state for any reason? Is the transition of the filament",
"the bed for better first layer adhesion. Other than that,",
"state is usually used to heat the bed for better",
"for better first layer adhesion. Other than that, does the",
"for any reason? Is the transition of the filament straight",
"3D printing, the glass state is usually used to heat",
"my understanding of FFF 3D printing, the glass state is",
"glass state is usually used to heat the bed for",
"the extruder keep ex:PLA in a glass state for any"
] |
[
"the first layer is perfect (did not know that could",
"ducts, installed a Creality 4.2.7 mainboard, and updated Marlin firmware",
"with good quality starting the second layer What I tried:",
"is somehow connected to firmware... Or E-steps are off while",
"get nice result. So I think it is either z-axis",
"and a heatblock (standard goldish Creality block). And since that",
"latest for now 2.1.1 version. I'm printing with PLA only.",
"to the latest for now 2.1.1 version. I'm printing with",
"layers\")](https://i.stack.imgur.com/SKahg.jpg \"Zoomed in photo of the printed model showing the",
"object with Cura and got pretty much the same result.",
"The only thing that bothers me is that diagonal scratch",
"* adjusted Z-axis steps/mm * another filament I can't figure",
"was 19.66mm instead of 20mm. I tuned steps to 407",
"flow rates](https://i.stack.imgur.com/j0wWW.jpg \"Difference of other flow rates\")](https://i.stack.imgur.com/j0wWW.jpg \"Difference of other",
"two layers](https://i.stack.imgur.com/NPZVO.jpg \"Upclose photo of the printed model showing the",
"much the same result. I babystepped z-axis during the print",
"I replaced the nozzle (standard brass one) but also upgraded",
"very different](https://i.stack.imgur.com/NpYMj.jpg \"Photo of the first two layers of a",
"thing that bothers me is that diagonal scratch - that",
"tried to tighten screws (as it is recommended [here](https://3dprinting.stackexchange.com/questions/5503/has-anyone-encountered-this-type-of-strange-print-patterns)) *",
"figure out what causes that thing. [![Photo of the first",
"other flow rates\")](https://i.stack.imgur.com/j0wWW.jpg \"Difference of other flow rates\") edited 2022-10-28",
"a plastic tube inside the heatbreak) and a heatblock (standard",
"enough. The nozzle started to wear down so I replaced",
"updated firmware * tried to tighten screws (as it is",
"helped a bit (model is 20.02mm now) , but still",
"the second layer What I tried: * recalibrated it with",
"steps to 407 from 400. That helped a bit (model",
"a bi-metal one (not all-metal, there is still a plastic",
"no difference printing slower. But flow rate did matter: 1.",
"thing. I will try Cura. The only thing that bothers",
"the difference in the two layers\") [) * adjusted Z-axis steps/mm * another filament",
"the latest for now 2.1.1 version. I'm printing with PLA",
"heatblock (standard goldish Creality block). And since that moment, the",
"in photo of the printed model showing the detailed differences",
"to check if z-axis motor steps up enough edited 2022-10-28",
"matter: 1. 100% flow rate 2. changed to 85% flow",
"printing well enough. The nozzle started to wear down so",
"out my z-axis steps were off. Model was 19.66mm instead",
"Creality block). And since that moment, the printer fails to",
"\"Difference of other flow rates\") edited 2022-10-28 15:53 It's not",
"is prusa slicer doing its thing. I will try Cura.",
"starting the second layer What I tried: * recalibrated it",
"100% flow rate 5. changed to 75% flow rate Maybe",
"the same ugly overextruded result. Tried to lower extrusion multiplier",
"nozzle nor heatbreak tube. I checked it using my old",
"the same result. I babystepped z-axis during the print to",
"print calibration cube to check if z-axis motor steps up",
"\"Photo of the first two layers of a printed model;",
"of the first two layers of a printed model; the",
"doing its thing. I will try Cura. The only thing",
"during the print to get nice result. So I think",
"is from the nozzle which makes me think it is",
"with PLA only. It was printing well enough. The nozzle",
"layers](https://i.stack.imgur.com/SKahg.jpg \"Zoomed in photo of the printed model showing the",
"wear down so I replaced the nozzle (standard brass one)",
"the printer fails to print with good quality starting the",
"rate did matter: 1. 100% flow rate 2. changed to",
"showing the difference in the two layers\")](https://i.stack.imgur.com/NPZVO.jpg \"Upclose photo of",
"second layer looking very different](https://i.stack.imgur.com/NpYMj.jpg \"Photo of the first two",
"second layer looking very different\") [) * adjusted Z-axis steps/mm * another",
"23:41 I think it is overextrusion. I tried reprinting object.",
"nozzle (standard brass one) but also upgraded the heatbreak to",
"is too low for the second layer [![Difference of other",
"did matter: 1. 100% flow rate 2. changed to 85%",
"have an Ender 3 Pro modded with the Hero Me",
"first layer is perfect (did not know that could be",
"try Cura. The only thing that bothers me is that",
"moment, the printer fails to print with good quality starting",
"[![Photo of the first two layers of a printed model;",
"flow rate 2. changed to 85% flow rate 3. changed",
"the printed model showing the difference in the two layers\")](https://i.stack.imgur.com/NPZVO.jpg",
"will try Cura. The only thing that bothers me is",
"18:34 Printed calibration cube. Turns out my z-axis steps were",
"of the printed model showing the detailed differences in the",
"nozzle which makes me think it is too low for",
"I think it is either z-axis motor not stepping enough",
"that is from the nozzle which makes me think it",
"to 85% flow rate 3. changed to 75% flow rate",
"rate 3. changed to 75% flow rate 4. changed to",
"motor steps up enough edited 2022-10-28 18:34 Printed calibration cube.",
"first layer was perfect, but second was poor again. There",
"perfect, but second was poor again. There was no difference",
"slicer doing its thing. I will try Cura. The only",
"the printed model showing the difference in the two layers](https://i.stack.imgur.com/NPZVO.jpg",
"flow rates\")](https://i.stack.imgur.com/j0wWW.jpg \"Difference of other flow rates\") edited 2022-10-28 15:53",
"the second layer looking very different\") [![Upclose photo of the",
"was perfect, but second was poor again. There was no",
"what causes that thing. [![Photo of the first two layers",
"goldish Creality block). And since that moment, the printer fails",
"I need to lower extrusion multiplier in slicer. I will",
"I think it is overextrusion. I tried reprinting object. The",
"layer looking very different](https://i.stack.imgur.com/NpYMj.jpg \"Photo of the first two layers",
"two layers\")](https://i.stack.imgur.com/SKahg.jpg \"Zoomed in photo of the printed model showing",
"the two layers\")](https://i.stack.imgur.com/SKahg.jpg \"Zoomed in photo of the printed model",
"I tried reprinting object. The first layer was perfect, but",
"a heatblock (standard goldish Creality block). And since that moment,",
"rates\")](https://i.stack.imgur.com/j0wWW.jpg \"Difference of other flow rates\") edited 2022-10-28 15:53 It's",
"printed model showing the detailed differences in the two layers\")](https://i.stack.imgur.com/SKahg.jpg",
"the two layers](https://i.stack.imgur.com/SKahg.jpg \"Zoomed in photo of the printed model",
"is overextrusion. I tried reprinting object. The first layer was",
"is still a plastic tube inside the heatbreak) and a",
"result. Tried to lower extrusion multiplier to 0.8 and still",
"to 0.8 and still got the same bad result edited",
"it is overextrusion. I tried reprinting object. The first layer",
"could be a thing :)) * updated firmware * tried",
"still a plastic tube inside the heatbreak) and a heatblock",
"flow rate Maybe it is prusa slicer doing its thing.",
"it with a gauge of 0.2 mm and the first",
"perfect (did not know that could be a thing :))",
"rates](https://i.stack.imgur.com/j0wWW.jpg \"Difference of other flow rates\")](https://i.stack.imgur.com/j0wWW.jpg \"Difference of other flow",
"slicer. I will print calibration cube to check if z-axis",
"heatbreak) and a heatblock (standard goldish Creality block). And since",
"difference in the two layers\")](https://i.stack.imgur.com/NPZVO.jpg \"Upclose photo of the printed",
"What I tried: * recalibrated it with a gauge of",
"I tuned steps to 407 from 400. That helped a",
"3. changed to 75% flow rate 4. changed to 100%",
"to tighten screws (as it is recommended [here](https://3dprinting.stackexchange.com/questions/5503/has-anyone-encountered-this-type-of-strange-print-patterns)) * adjusted",
"think it is either z-axis motor not stepping enough or",
"Gen 6 air ducts, installed a Creality 4.2.7 mainboard, and",
"in the two layers\")](https://i.stack.imgur.com/SKahg.jpg \"Zoomed in photo of the printed",
"I sliced object with Cura and got pretty much the",
"6 air ducts, installed a Creality 4.2.7 mainboard, and updated",
"is that diagonal scratch - that is from the nozzle",
"now) , but still the same ugly overextruded result. Tried",
"(standard brass one) but also upgraded the heatbreak to a",
"overextruded result. Tried to lower extrusion multiplier to 0.8 and",
"2022-10-28 18:34 Printed calibration cube. Turns out my z-axis steps",
"printed model; the second layer looking very different\") [![Upclose photo",
"ugly overextruded result. Tried to lower extrusion multiplier to 0.8",
"the nozzle which makes me think it is too low",
"2022-10-25 23:41 I think it is overextrusion. I tried reprinting",
"bit (model is 20.02mm now) , but still the same",
"I checked it using my old hardware. Maybe it is",
"printed model showing the difference in the two layers\")](https://i.stack.imgur.com/NPZVO.jpg \"Upclose",
"slicer thing. I sliced object with Cura and got pretty",
"layer [![Difference of other flow rates](https://i.stack.imgur.com/j0wWW.jpg \"Difference of other flow",
"cube to check if z-axis motor steps up enough edited",
"only thing that bothers me is that diagonal scratch -",
"layer was perfect, but second was poor again. There was",
"* recalibrated it with a gauge of 0.2 mm and",
"plastic tube inside the heatbreak) and a heatblock (standard goldish",
"differences in the two layers\")](https://i.stack.imgur.com/SKahg.jpg \"Zoomed in photo of the",
"print to get nice result. So I think it is",
"and the first layer is perfect (did not know that",
"showing the detailed differences in the two layers\")](https://i.stack.imgur.com/SKahg.jpg \"Zoomed in",
"diagonal scratch - that is from the nozzle which makes",
"different\")](https://i.stack.imgur.com/NpYMj.jpg \"Photo of the first two layers of a printed",
"nozzle started to wear down so I replaced the nozzle",
"PLA only. It was printing well enough. The nozzle started",
"looking very different\") [![Upclose photo of the printed model showing",
"Printed calibration cube. Turns out my z-axis steps were off.",
"first two layers of a printed model; the second layer",
"which makes me think it is too low for the",
"the heatbreak to a bi-metal one (not all-metal, there is",
"edited 2022-10-28 15:53 It's not a slicer thing. I sliced",
"two layers\")](https://i.stack.imgur.com/NPZVO.jpg \"Upclose photo of the printed model showing the",
"showing the detailed differences in the two layers\") edited 2022-10-25",
"difference in the two layers](https://i.stack.imgur.com/NPZVO.jpg \"Upclose photo of the printed",
"Maybe it is prusa slicer doing its thing. I will",
"down so I replaced the nozzle (standard brass one) but",
"* another filament I can't figure out what causes that",
"two layers\") edited 2022-10-25 23:41 I think it is overextrusion.",
"changed to 100% flow rate 5. changed to 75% flow",
"printing slower. But flow rate did matter: 1. 100% flow",
"Model was 19.66mm instead of 20mm. I tuned steps to",
"and got pretty much the same result. I babystepped z-axis",
"again. There was no difference with cooling or without, no",
"photo of the printed model showing the detailed differences in",
"its thing. I will try Cura. The only thing that",
"z-axis motor steps up enough edited 2022-10-28 18:34 Printed calibration",
"block). And since that moment, the printer fails to print",
"printer fails to print with good quality starting the second",
"different\") [![Upclose photo of the printed model showing the difference",
"print with good quality starting the second layer What I",
"it is somehow connected to firmware... Or E-steps are off",
"one) but also upgraded the heatbreak to a bi-metal one",
"different](https://i.stack.imgur.com/NpYMj.jpg \"Photo of the first two layers of a printed",
"layer is perfect (did not know that could be a",
"The first layer was perfect, but second was poor again.",
"of a printed model; the second layer looking very different\")](https://i.stack.imgur.com/NpYMj.jpg",
"a gauge of 0.2 mm and the first layer is",
"- that is from the nozzle which makes me think",
"flow rates\") edited 2022-10-28 15:53 It's not a slicer thing.",
"There was no difference with cooling or without, no difference",
"tighten screws (as it is recommended [here](https://3dprinting.stackexchange.com/questions/5503/has-anyone-encountered-this-type-of-strange-print-patterns)) * adjusted Z-axis",
"bad result edited 2022-10-30 22:11 It is neither nozzle nor",
"cube. Turns out my z-axis steps were off. Model was",
"other flow rates](https://i.stack.imgur.com/j0wWW.jpg \"Difference of other flow rates\")](https://i.stack.imgur.com/j0wWW.jpg \"Difference of",
"there is still a plastic tube inside the heatbreak) and",
"makes me think it is too low for the second",
"showing the difference in the two layers](https://i.stack.imgur.com/NPZVO.jpg \"Upclose photo of",
"a thing :)) * updated firmware * tried to tighten",
"with the Hero Me Gen 6 air ducts, installed a",
"it is prusa slicer doing its thing. I will try",
"if z-axis motor steps up enough edited 2022-10-28 18:34 Printed",
", but still the same ugly overextruded result. Tried to",
"the same bad result edited 2022-10-30 22:11 It is neither",
"other flow rates\") edited 2022-10-28 15:53 It's not a slicer",
"to 75% flow rate Maybe it is prusa slicer doing",
"the print to get nice result. So I think it",
"hardware. Maybe it is somehow connected to firmware... Or E-steps",
"or I need to lower extrusion multiplier in slicer. I",
"check if z-axis motor steps up enough edited 2022-10-28 18:34",
"replaced the nozzle (standard brass one) but also upgraded the",
"It is neither nozzle nor heatbreak tube. I checked it",
"the detailed differences in the two layers](https://i.stack.imgur.com/SKahg.jpg \"Zoomed in photo",
"model showing the detailed differences in the two layers\") edited",
"a slicer thing. I sliced object with Cura and got",
"mm and the first layer is perfect (did not know",
"low for the second layer [![Difference of other flow rates](https://i.stack.imgur.com/j0wWW.jpg",
"off. Model was 19.66mm instead of 20mm. I tuned steps",
"the first two layers of a printed model; the second",
"version. I'm printing with PLA only. It was printing well",
"I have an Ender 3 Pro modded with the Hero",
"detailed differences in the two layers\")](https://i.stack.imgur.com/SKahg.jpg \"Zoomed in photo of",
"the two layers](https://i.stack.imgur.com/NPZVO.jpg \"Upclose photo of the printed model showing",
"of a printed model; the second layer looking very different](https://i.stack.imgur.com/NpYMj.jpg",
"got the same bad result edited 2022-10-30 22:11 It is",
"layers](https://i.stack.imgur.com/NPZVO.jpg \"Upclose photo of the printed model showing the difference",
"in the two layers\")](https://i.stack.imgur.com/NPZVO.jpg \"Upclose photo of the printed model",
"layers\")](https://i.stack.imgur.com/NPZVO.jpg \"Upclose photo of the printed model showing the difference",
"flow rate 3. changed to 75% flow rate 4. changed",
"tuned steps to 407 from 400. That helped a bit",
"20mm. I tuned steps to 407 from 400. That helped",
"model; the second layer looking very different](https://i.stack.imgur.com/NpYMj.jpg \"Photo of the",
"model; the second layer looking very different\") [![Upclose photo of",
"\"Difference of other flow rates\")](https://i.stack.imgur.com/j0wWW.jpg \"Difference of other flow rates\")",
"that moment, the printer fails to print with good quality",
"Creality 4.2.7 mainboard, and updated Marlin firmware to the latest",
"recalibrated it with a gauge of 0.2 mm and the",
"z-axis steps were off. Model was 19.66mm instead of 20mm.",
"or without, no difference printing slower. But flow rate did",
"the difference in the two layers\")](https://i.stack.imgur.com/NPZVO.jpg \"Upclose photo of the",
"4.2.7 mainboard, and updated Marlin firmware to the latest for",
"fails to print with good quality starting the second layer",
"is neither nozzle nor heatbreak tube. I checked it using",
"the heatbreak) and a heatblock (standard goldish Creality block). And",
"looking very different](https://i.stack.imgur.com/NpYMj.jpg \"Photo of the first two layers of",
"reprinting object. The first layer was perfect, but second was",
"differences in the two layers\") edited 2022-10-25 23:41 I think",
"But flow rate did matter: 1. 100% flow rate 2.",
"not a slicer thing. I sliced object with Cura and",
"printed model showing the detailed differences in the two layers\")",
"know that could be a thing :)) * updated firmware",
"(standard goldish Creality block). And since that moment, the printer",
"rates\") edited 2022-10-28 15:53 It's not a slicer thing. I",
"the difference in the two layers](https://i.stack.imgur.com/NPZVO.jpg \"Upclose photo of the",
"my old hardware. Maybe it is somehow connected to firmware...",
"lower extrusion multiplier to 0.8 and still got the same",
"for now 2.1.1 version. I'm printing with PLA only. It",
"layers\") edited 2022-10-25 23:41 I think it is overextrusion. I",
"were off. Model was 19.66mm instead of 20mm. I tuned",
"that bothers me is that diagonal scratch - that is",
"a printed model; the second layer looking very different\") [![Upclose",
"showing the detailed differences in the two layers](https://i.stack.imgur.com/SKahg.jpg \"Zoomed in",
"prusa slicer doing its thing. I will try Cura. The",
"2022-10-28 15:53 It's not a slicer thing. I sliced object",
"filament I can't figure out what causes that thing. [![Photo",
"using my old hardware. Maybe it is somehow connected to",
"only. It was printing well enough. The nozzle started to",
"same result. I babystepped z-axis during the print to get",
"to a bi-metal one (not all-metal, there is still a",
"object. The first layer was perfect, but second was poor",
"steps/mm * another filament I can't figure out what causes",
"extrusion multiplier to 0.8 and still got the same bad",
"Cura and got pretty much the same result. I babystepped",
"100% flow rate 2. changed to 85% flow rate 3.",
"air ducts, installed a Creality 4.2.7 mainboard, and updated Marlin",
"* updated firmware * tried to tighten screws (as it",
"to 100% flow rate 5. changed to 75% flow rate",
"second layer What I tried: * recalibrated it with a",
"printed model; the second layer looking very different](https://i.stack.imgur.com/NpYMj.jpg \"Photo of",
"I will try Cura. The only thing that bothers me",
"It's not a slicer thing. I sliced object with Cura",
"rate 2. changed to 85% flow rate 3. changed to",
"motor not stepping enough or I need to lower extrusion",
":)) * updated firmware * tried to tighten screws (as",
"I tried: * recalibrated it with a gauge of 0.2",
"I will print calibration cube to check if z-axis motor",
"second was poor again. There was no difference with cooling",
"gauge of 0.2 mm and the first layer is perfect",
"can't figure out what causes that thing. [)",
"enough edited 2022-10-28 18:34 Printed calibration cube. Turns out my",
"It was printing well enough. The nozzle started to wear",
"flow rate 5. changed to 75% flow rate Maybe it",
"(not all-metal, there is still a plastic tube inside the",
"all-metal, there is still a plastic tube inside the heatbreak)",
"printed model; the second layer looking very different\")](https://i.stack.imgur.com/NpYMj.jpg \"Photo of",
"differences in the two layers](https://i.stack.imgur.com/SKahg.jpg \"Zoomed in photo of the",
"sliced object with Cura and got pretty much the same",
"upgraded the heatbreak to a bi-metal one (not all-metal, there",
"from 400. That helped a bit (model is 20.02mm now)",
"thing :)) * updated firmware * tried to tighten screws",
"5. changed to 75% flow rate Maybe it is prusa",
"causes that thing. [![Photo of the first two layers of",
"15:53 It's not a slicer thing. I sliced object with",
"0.8 and still got the same bad result edited 2022-10-30",
"difference in the two layers\") [![Zoomed in photo of the",
"two layers\") [![Zoomed in photo of the printed model showing",
"it is too low for the second layer [![Difference of",
"[![Difference of other flow rates](https://i.stack.imgur.com/j0wWW.jpg \"Difference of other flow rates\")](https://i.stack.imgur.com/j0wWW.jpg",
"updated Marlin firmware to the latest for now 2.1.1 version.",
"thing. I sliced object with Cura and got pretty much",
"calibration cube to check if z-axis motor steps up enough",
"also upgraded the heatbreak to a bi-metal one (not all-metal,",
"second layer [![Difference of other flow rates](https://i.stack.imgur.com/j0wWW.jpg \"Difference of other",
"I'm printing with PLA only. It was printing well enough.",
"somehow connected to firmware... Or E-steps are off while printing",
"Cura. The only thing that bothers me is that diagonal",
"result. So I think it is either z-axis motor not",
"rate Maybe it is prusa slicer doing its thing. I",
"still the same ugly overextruded result. Tried to lower extrusion",
"the printed model showing the detailed differences in the two",
"printed model showing the difference in the two layers](https://i.stack.imgur.com/NPZVO.jpg \"Upclose",
"of the printed model showing the difference in the two",
"of other flow rates](https://i.stack.imgur.com/j0wWW.jpg \"Difference of other flow rates\")](https://i.stack.imgur.com/j0wWW.jpg \"Difference",
"it is either z-axis motor not stepping enough or I",
"neither nozzle nor heatbreak tube. I checked it using my",
"was poor again. There was no difference with cooling or",
"out what causes that thing. [![Photo of the first two",
"layer looking very different\") [![Upclose photo of the printed model",
"edited 2022-10-28 18:34 Printed calibration cube. Turns out my z-axis",
"400. That helped a bit (model is 20.02mm now) ,",
"so I replaced the nozzle (standard brass one) but also",
"20.02mm now) , but still the same ugly overextruded result.",
"tube. I checked it using my old hardware. Maybe it",
"of a printed model; the second layer looking very different\")",
"stepping enough or I need to lower extrusion multiplier in",
"not know that could be a thing :)) * updated",
"of other flow rates\") edited 2022-10-28 15:53 It's not a",
"still got the same bad result edited 2022-10-30 22:11 It",
"well enough. The nozzle started to wear down so I",
"tube inside the heatbreak) and a heatblock (standard goldish Creality",
"flow rate 4. changed to 100% flow rate 5. changed",
"in the two layers\") [![Zoomed in photo of the printed",
"without, no difference printing slower. But flow rate did matter:",
"with cooling or without, no difference printing slower. But flow",
"75% flow rate Maybe it is prusa slicer doing its",
"two layers of a printed model; the second layer looking",
"babystepped z-axis during the print to get nice result. So",
"extrusion multiplier in slicer. I will print calibration cube to",
"installed a Creality 4.2.7 mainboard, and updated Marlin firmware to",
"the second layer looking very different](https://i.stack.imgur.com/NpYMj.jpg \"Photo of the first",
"model showing the detailed differences in the two layers](https://i.stack.imgur.com/SKahg.jpg \"Zoomed",
"[here](https://3dprinting.stackexchange.com/questions/5503/has-anyone-encountered-this-type-of-strange-print-patterns)) * adjusted Z-axis steps/mm * another filament I can't",
"recommended [here](https://3dprinting.stackexchange.com/questions/5503/has-anyone-encountered-this-type-of-strange-print-patterns)) * adjusted Z-axis steps/mm * another filament I",
"for the second layer [![Difference of other flow rates](https://i.stack.imgur.com/j0wWW.jpg \"Difference",
"me is that diagonal scratch - that is from the",
"Tried to lower extrusion multiplier to 0.8 and still got",
"slower. But flow rate did matter: 1. 100% flow rate",
"steps up enough edited 2022-10-28 18:34 Printed calibration cube. Turns",
"to lower extrusion multiplier in slicer. I will print calibration",
"that diagonal scratch - that is from the nozzle which",
"a printed model; the second layer looking very different](https://i.stack.imgur.com/NpYMj.jpg \"Photo",
"2.1.1 version. I'm printing with PLA only. It was printing",
"quality starting the second layer What I tried: * recalibrated",
"model showing the difference in the two layers\")](https://i.stack.imgur.com/NPZVO.jpg \"Upclose photo",
"(model is 20.02mm now) , but still the same ugly",
"the nozzle (standard brass one) but also upgraded the heatbreak",
"2. changed to 85% flow rate 3. changed to 75%",
"up enough edited 2022-10-28 18:34 Printed calibration cube. Turns out",
"got pretty much the same result. I babystepped z-axis during",
"firmware * tried to tighten screws (as it is recommended",
"the two layers\")](https://i.stack.imgur.com/NPZVO.jpg \"Upclose photo of the printed model showing",
"edited 2022-10-30 22:11 It is neither nozzle nor heatbreak tube.",
"rate 4. changed to 100% flow rate 5. changed to",
"enough or I need to lower extrusion multiplier in slicer.",
"difference printing slower. But flow rate did matter: 1. 100%",
"a Creality 4.2.7 mainboard, and updated Marlin firmware to the",
"I babystepped z-axis during the print to get nice result.",
"detailed differences in the two layers](https://i.stack.imgur.com/SKahg.jpg \"Zoomed in photo of",
"one (not all-metal, there is still a plastic tube inside",
"0.2 mm and the first layer is perfect (did not",
"Maybe it is somehow connected to firmware... Or E-steps are",
"\"Zoomed in photo of the printed model showing the detailed",
"that could be a thing :)) * updated firmware *",
"and still got the same bad result edited 2022-10-30 22:11",
"4. changed to 100% flow rate 5. changed to 75%",
"be a thing :)) * updated firmware * tried to",
"of other flow rates\")](https://i.stack.imgur.com/j0wWW.jpg \"Difference of other flow rates\") edited",
"started to wear down so I replaced the nozzle (standard",
"nice result. So I think it is either z-axis motor",
"but also upgraded the heatbreak to a bi-metal one (not",
"with Cura and got pretty much the same result. I",
"mainboard, and updated Marlin firmware to the latest for now",
"the printed model showing the difference in the two layers\")",
"changed to 75% flow rate Maybe it is prusa slicer",
"was printing well enough. The nozzle started to wear down",
"me think it is too low for the second layer",
"second layer looking very different\")](https://i.stack.imgur.com/NpYMj.jpg \"Photo of the first two",
"photo of the printed model showing the difference in the",
"old hardware. Maybe it is somehow connected to firmware... Or",
"in the two layers](https://i.stack.imgur.com/SKahg.jpg \"Zoomed in photo of the printed",
"but still the same ugly overextruded result. Tried to lower",
"result edited 2022-10-30 22:11 It is neither nozzle nor heatbreak",
"brass one) but also upgraded the heatbreak to a bi-metal",
"layers of a printed model; the second layer looking very",
"of 0.2 mm and the first layer is perfect (did",
"Hero Me Gen 6 air ducts, installed a Creality 4.2.7",
"in the two layers](https://i.stack.imgur.com/NPZVO.jpg \"Upclose photo of the printed model",
"to wear down so I replaced the nozzle (standard brass",
"layers\") [![Zoomed in photo of the printed model showing the",
"scratch - that is from the nozzle which makes me",
"think it is overextrusion. I tried reprinting object. The first",
"So I think it is either z-axis motor not stepping",
"a printed model; the second layer looking very different\")](https://i.stack.imgur.com/NpYMj.jpg \"Photo",
"85% flow rate 3. changed to 75% flow rate 4.",
"407 from 400. That helped a bit (model is 20.02mm",
"since that moment, the printer fails to print with good",
"the second layer [![Difference of other flow rates](https://i.stack.imgur.com/j0wWW.jpg \"Difference of",
"from the nozzle which makes me think it is too",
"the Hero Me Gen 6 air ducts, installed a Creality",
"printing with PLA only. It was printing well enough. The",
"to get nice result. So I think it is either",
"same ugly overextruded result. Tried to lower extrusion multiplier to",
"not stepping enough or I need to lower extrusion multiplier",
"too low for the second layer [![Difference of other flow",
"model showing the detailed differences in the two layers\")](https://i.stack.imgur.com/SKahg.jpg \"Zoomed",
"layer looking very different\")](https://i.stack.imgur.com/NpYMj.jpg \"Photo of the first two layers",
"but second was poor again. There was no difference with",
"bothers me is that diagonal scratch - that is from",
"an Ender 3 Pro modded with the Hero Me Gen",
"the detailed differences in the two layers\")](https://i.stack.imgur.com/SKahg.jpg \"Zoomed in photo",
"19.66mm instead of 20mm. I tuned steps to 407 from",
"good quality starting the second layer What I tried: *",
"cooling or without, no difference printing slower. But flow rate",
"looking very different\")](https://i.stack.imgur.com/NpYMj.jpg \"Photo of the first two layers of",
"is 20.02mm now) , but still the same ugly overextruded",
"to print with good quality starting the second layer What",
"is either z-axis motor not stepping enough or I need",
"modded with the Hero Me Gen 6 air ducts, installed",
"calibration cube. Turns out my z-axis steps were off. Model",
"lower extrusion multiplier in slicer. I will print calibration cube",
"pretty much the same result. I babystepped z-axis during the",
"(as it is recommended [here](https://3dprinting.stackexchange.com/questions/5503/has-anyone-encountered-this-type-of-strange-print-patterns)) * adjusted Z-axis steps/mm *",
"multiplier in slicer. I will print calibration cube to check",
"Z-axis steps/mm * another filament I can't figure out what",
"the two layers\") [![Zoomed in photo of the printed model",
"changed to 85% flow rate 3. changed to 75% flow",
"Ender 3 Pro modded with the Hero Me Gen 6",
"[![Zoomed in photo of the printed model showing the detailed",
"to 75% flow rate 4. changed to 100% flow rate",
"z-axis during the print to get nice result. So I",
"tried reprinting object. The first layer was perfect, but second",
"no difference with cooling or without, no difference printing slower.",
"1. 100% flow rate 2. changed to 85% flow rate",
"steps were off. Model was 19.66mm instead of 20mm. I",
"75% flow rate 4. changed to 100% flow rate 5.",
"checked it using my old hardware. Maybe it is somehow",
"thing. [![Photo of the first two layers of a printed",
"heatbreak tube. I checked it using my old hardware. Maybe",
"and updated Marlin firmware to the latest for now 2.1.1",
"two layers](https://i.stack.imgur.com/SKahg.jpg \"Zoomed in photo of the printed model showing",
"detailed differences in the two layers\") edited 2022-10-25 23:41 I",
"bi-metal one (not all-metal, there is still a plastic tube",
"the two layers\") edited 2022-10-25 23:41 I think it is",
"changed to 75% flow rate 4. changed to 100% flow",
"my z-axis steps were off. Model was 19.66mm instead of",
"That helped a bit (model is 20.02mm now) , but",
"inside the heatbreak) and a heatblock (standard goldish Creality block).",
"will print calibration cube to check if z-axis motor steps",
"model; the second layer looking very different\")](https://i.stack.imgur.com/NpYMj.jpg \"Photo of the",
"in slicer. I will print calibration cube to check if",
"tried: * recalibrated it with a gauge of 0.2 mm",
"same bad result edited 2022-10-30 22:11 It is neither nozzle",
"another filament I can't figure out what causes that thing.",
"very different\")](https://i.stack.imgur.com/NpYMj.jpg \"Photo of the first two layers of a",
"flow rate did matter: 1. 100% flow rate 2. changed",
"a bit (model is 20.02mm now) , but still the",
"model showing the difference in the two layers\") [![Zoomed in",
"in the two layers\") edited 2022-10-25 23:41 I think it",
"that thing. [![Photo of the first two layers of a",
"overextrusion. I tried reprinting object. The first layer was perfect,",
"instead of 20mm. I tuned steps to 407 from 400.",
"model showing the difference in the two layers](https://i.stack.imgur.com/NPZVO.jpg \"Upclose photo",
"need to lower extrusion multiplier in slicer. I will print",
"(did not know that could be a thing :)) *",
"now 2.1.1 version. I'm printing with PLA only. It was",
"layer What I tried: * recalibrated it with a gauge",
"firmware to the latest for now 2.1.1 version. I'm printing",
"nor heatbreak tube. I checked it using my old hardware.",
"to 407 from 400. That helped a bit (model is",
"is perfect (did not know that could be a thing",
"to lower extrusion multiplier to 0.8 and still got the",
"I can't figure out what causes that thing. [![Photo of",
"the second layer looking very different\")](https://i.stack.imgur.com/NpYMj.jpg \"Photo of the first",
"the detailed differences in the two layers\") edited 2022-10-25 23:41",
"Marlin firmware to the latest for now 2.1.1 version. I'm",
"z-axis motor not stepping enough or I need to lower",
"heatbreak to a bi-metal one (not all-metal, there is still",
"result. I babystepped z-axis during the print to get nice",
"Me Gen 6 air ducts, installed a Creality 4.2.7 mainboard,",
"adjusted Z-axis steps/mm * another filament I can't figure out",
"multiplier to 0.8 and still got the same bad result",
"Pro modded with the Hero Me Gen 6 air ducts,",
"2022-10-30 22:11 It is neither nozzle nor heatbreak tube. I",
"was no difference with cooling or without, no difference printing",
"showing the difference in the two layers\") [![Zoomed in photo",
"Turns out my z-axis steps were off. Model was 19.66mm",
"printed model showing the detailed differences in the two layers](https://i.stack.imgur.com/SKahg.jpg",
"rate 5. changed to 75% flow rate Maybe it is",
"edited 2022-10-25 23:41 I think it is overextrusion. I tried",
"of 20mm. I tuned steps to 407 from 400. That",
"either z-axis motor not stepping enough or I need to",
"22:11 It is neither nozzle nor heatbreak tube. I checked",
"it using my old hardware. Maybe it is somehow connected",
"screws (as it is recommended [here](https://3dprinting.stackexchange.com/questions/5503/has-anyone-encountered-this-type-of-strange-print-patterns)) * adjusted Z-axis steps/mm",
"[![Upclose photo of the printed model showing the difference in",
"with a gauge of 0.2 mm and the first layer"
] |
[
"what I'll buy now is what I will have for",
"I have some technical experience, can make some things and",
"working parts. I still have NEMA17 motors, 4 of them.",
"was thinking about [Prusa i3 MK3S+](https://www.prusa3d.com/product/original-prusa-i3-mk3s-kit-3/), and [MMU2S](https://www.prusa3d.com/product/original-prusa-i3-mmu2s-upgrade-kit-for-mk2-5s-mk3s-org/) looks really",
"after reading reviews I hardly can justify buying it. I",
"soluble supports. However, after reading reviews I hardly can justify",
"gadgets too big for my LCD resin one. Due to",
"items and wearable gadgets too big for my LCD resin",
"I will have for at least a year. I was",
"for at least a year. I was thinking about [Prusa",
"built a 3 axis stepper motor system from scratch, and",
"to financing & tax reasons, what I'll buy now is",
"household items and wearable gadgets too big for my LCD",
"& tax reasons, what I'll buy now is what I",
"once even built a 3 axis stepper motor system from",
"financing & tax reasons, what I'll buy now is what",
"print and assemble MMU2S? Is there an official Bill Of",
"I have a resin LCD printer and have printed working",
"i3 MK3S+, what else would I need to print and",
"about [Prusa i3 MK3S+](https://www.prusa3d.com/product/original-prusa-i3-mk3s-kit-3/), and [MMU2S](https://www.prusa3d.com/product/original-prusa-i3-mmu2s-upgrade-kit-for-mk2-5s-mk3s-org/) looks really interesting and",
"and have printed working parts. I still have NEMA17 motors,",
"I want to buy my first FDM printer, to print",
"make some things and once even built a 3 axis",
"a resin LCD printer and have printed working parts. I",
"i3 MK3S+](https://www.prusa3d.com/product/original-prusa-i3-mk3s-kit-3/), and [MMU2S](https://www.prusa3d.com/product/original-prusa-i3-mmu2s-upgrade-kit-for-mk2-5s-mk3s-org/) looks really interesting and useful, especially",
"now is what I will have for at least a",
"especially to print water soluble supports. However, after reading reviews",
"FDM printer, to print household items and wearable gadgets too",
"some technical experience, can make some things and once even",
"my first FDM printer, to print household items and wearable",
"least a year. I was thinking about [Prusa i3 MK3S+](https://www.prusa3d.com/product/original-prusa-i3-mk3s-kit-3/),",
"and it worked. I have a resin LCD printer and",
"my LCD resin one. Due to financing & tax reasons,",
"interesting and useful, especially to print water soluble supports. However,",
"have for at least a year. I was thinking about",
"to buy my first FDM printer, to print household items",
"buy now is what I will have for at least",
"reasons, what I'll buy now is what I will have",
"Assuming I'll get Prusa i3 MK3S+, what else would I",
"stepper motor system from scratch, and it worked. I have",
"have printed working parts. I still have NEMA17 motors, 4",
"assemble MMU2S? Is there an official Bill Of Materials? Blueprints?",
"looks really interesting and useful, especially to print water soluble",
"can make some things and once even built a 3",
"resin one. Due to financing & tax reasons, what I'll",
"experience, can make some things and once even built a",
"some things and once even built a 3 axis stepper",
"Due to financing & tax reasons, what I'll buy now",
"get Prusa i3 MK3S+, what else would I need to",
"Is there an official Bill Of Materials? Blueprints? STL files?",
"motor system from scratch, and it worked. I have a",
"and assemble MMU2S? Is there an official Bill Of Materials?",
"want to buy my first FDM printer, to print household",
"justify buying it. I have some technical experience, can make",
"I was thinking about [Prusa i3 MK3S+](https://www.prusa3d.com/product/original-prusa-i3-mk3s-kit-3/), and [MMU2S](https://www.prusa3d.com/product/original-prusa-i3-mmu2s-upgrade-kit-for-mk2-5s-mk3s-org/) looks",
"will have for at least a year. I was thinking",
"one. Due to financing & tax reasons, what I'll buy",
"a year. I was thinking about [Prusa i3 MK3S+](https://www.prusa3d.com/product/original-prusa-i3-mk3s-kit-3/), and",
"reading reviews I hardly can justify buying it. I have",
"too big for my LCD resin one. Due to financing",
"axis stepper motor system from scratch, and it worked. I",
"have NEMA17 motors, 4 of them. Assuming I'll get Prusa",
"what else would I need to print and assemble MMU2S?",
"I need to print and assemble MMU2S? Is there an",
"things and once even built a 3 axis stepper motor",
"MK3S+, what else would I need to print and assemble",
"is what I will have for at least a year.",
"else would I need to print and assemble MMU2S? Is",
"and wearable gadgets too big for my LCD resin one.",
"useful, especially to print water soluble supports. However, after reading",
"it. I have some technical experience, can make some things",
"from scratch, and it worked. I have a resin LCD",
"system from scratch, and it worked. I have a resin",
"tax reasons, what I'll buy now is what I will",
"I still have NEMA17 motors, 4 of them. Assuming I'll",
"still have NEMA17 motors, 4 of them. Assuming I'll get",
"3 axis stepper motor system from scratch, and it worked.",
"can justify buying it. I have some technical experience, can",
"[MMU2S](https://www.prusa3d.com/product/original-prusa-i3-mmu2s-upgrade-kit-for-mk2-5s-mk3s-org/) looks really interesting and useful, especially to print water",
"supports. However, after reading reviews I hardly can justify buying",
"technical experience, can make some things and once even built",
"have some technical experience, can make some things and once",
"to print household items and wearable gadgets too big for",
"really interesting and useful, especially to print water soluble supports.",
"to print and assemble MMU2S? Is there an official Bill",
"I'll buy now is what I will have for at",
"LCD resin one. Due to financing & tax reasons, what",
"[Prusa i3 MK3S+](https://www.prusa3d.com/product/original-prusa-i3-mk3s-kit-3/), and [MMU2S](https://www.prusa3d.com/product/original-prusa-i3-mmu2s-upgrade-kit-for-mk2-5s-mk3s-org/) looks really interesting and useful,",
"print household items and wearable gadgets too big for my",
"big for my LCD resin one. Due to financing &",
"what I will have for at least a year. I",
"reviews I hardly can justify buying it. I have some",
"printer and have printed working parts. I still have NEMA17",
"4 of them. Assuming I'll get Prusa i3 MK3S+, what",
"it worked. I have a resin LCD printer and have",
"even built a 3 axis stepper motor system from scratch,",
"hardly can justify buying it. I have some technical experience,",
"wearable gadgets too big for my LCD resin one. Due",
"print water soluble supports. However, after reading reviews I hardly",
"need to print and assemble MMU2S? Is there an official",
"them. Assuming I'll get Prusa i3 MK3S+, what else would",
"scratch, and it worked. I have a resin LCD printer",
"for my LCD resin one. Due to financing & tax",
"printed working parts. I still have NEMA17 motors, 4 of",
"motors, 4 of them. Assuming I'll get Prusa i3 MK3S+,",
"year. I was thinking about [Prusa i3 MK3S+](https://www.prusa3d.com/product/original-prusa-i3-mk3s-kit-3/), and [MMU2S](https://www.prusa3d.com/product/original-prusa-i3-mmu2s-upgrade-kit-for-mk2-5s-mk3s-org/)",
"However, after reading reviews I hardly can justify buying it.",
"first FDM printer, to print household items and wearable gadgets",
"thinking about [Prusa i3 MK3S+](https://www.prusa3d.com/product/original-prusa-i3-mk3s-kit-3/), and [MMU2S](https://www.prusa3d.com/product/original-prusa-i3-mmu2s-upgrade-kit-for-mk2-5s-mk3s-org/) looks really interesting",
"have a resin LCD printer and have printed working parts.",
"a 3 axis stepper motor system from scratch, and it",
"of them. Assuming I'll get Prusa i3 MK3S+, what else",
"buy my first FDM printer, to print household items and",
"LCD printer and have printed working parts. I still have",
"and useful, especially to print water soluble supports. However, after",
"resin LCD printer and have printed working parts. I still",
"MK3S+](https://www.prusa3d.com/product/original-prusa-i3-mk3s-kit-3/), and [MMU2S](https://www.prusa3d.com/product/original-prusa-i3-mmu2s-upgrade-kit-for-mk2-5s-mk3s-org/) looks really interesting and useful, especially to",
"to print water soluble supports. However, after reading reviews I",
"and once even built a 3 axis stepper motor system",
"and [MMU2S](https://www.prusa3d.com/product/original-prusa-i3-mmu2s-upgrade-kit-for-mk2-5s-mk3s-org/) looks really interesting and useful, especially to print",
"I'll get Prusa i3 MK3S+, what else would I need",
"printer, to print household items and wearable gadgets too big",
"MMU2S? Is there an official Bill Of Materials? Blueprints? STL",
"at least a year. I was thinking about [Prusa i3",
"would I need to print and assemble MMU2S? Is there",
"Prusa i3 MK3S+, what else would I need to print",
"water soluble supports. However, after reading reviews I hardly can",
"buying it. I have some technical experience, can make some",
"I hardly can justify buying it. I have some technical",
"NEMA17 motors, 4 of them. Assuming I'll get Prusa i3",
"worked. I have a resin LCD printer and have printed",
"parts. I still have NEMA17 motors, 4 of them. Assuming"
] |
[
"but I would prefer a raft. **Edit:** Sorry for leaving",
"volume (400 % = 190x200x200 mm). I have to reduce",
"to 365 % (= 171x183x180 mmm) to fit the slicing.",
"not matter and cura simply adds the raft size to",
"400 % size, I will try to use a small",
"a model which I scaled to 400 %. To improve",
"about the models form. I get the 220+raft limitation but",
"is tapered downwards: [](https://i.stack.imgur.com/9PC5q.png) So the raft",
"reduce the scaling to 365 % (= 171x183x180 mmm) to",
"the printer's build volume (400 % = 190x200x200 mm). I",
"able to slice the model despite being still within the",
"info about the models form. I get the 220+raft limitation",
"default raft (Extra Margin = 15 mm). Unfortunately, Cura is",
"despite being still within the printer's build volume (400 %",
"not able to slice the model despite being still within",
"raft (Extra Margin = 15 mm). Unfortunately, Cura is not",
"being still within the printer's build volume (400 % =",
"image description here](https://i.stack.imgur.com/9PC5q.png)](https://i.stack.imgur.com/9PC5q.png) So the raft actually fits the printers/slicers",
"% size, I will try to use a small support",
"it really not matter and cura simply adds the raft",
"Cura is not able to slice the model despite being",
"the raft actually fits the printers/slicers default limit. Does it",
"and cura simply adds the raft size to models max",
"Margin = 15 mm). Unfortunately, Cura is not able to",
"Does it really not matter and cura simply adds the",
"scaling to 365 % (= 171x183x180 mmm) to fit the",
"= 15 mm). Unfortunately, Cura is not able to slice",
"downwards: [](https://i.stack.imgur.com/9PC5q.png) So the raft actually fits",
"use a small support structure for better bed adhesion but",
"adhesion but I would prefer a raft. **Edit:** Sorry for",
"slicing. As a workaround for printing the 400 % size,",
"scaled to 400 %. To improve bed adhesion I wanted",
"my Ender 3 v2 printer. I want to print a",
"have to reduce the scaling to 365 % (= 171x183x180",
"size, I will try to use a small support structure",
"I scaled to 400 %. To improve bed adhesion I",
"I get the 220+raft limitation but my model is tapered",
"%. To improve bed adhesion I wanted to add a",
"am using Cura 4.13.1 as a slicer for my Ender",
"to slice the model despite being still within the printer's",
"but my model is tapered downwards: [](https://i.stack.imgur.com/9PC5q.png)",
"within the printer's build volume (400 % = 190x200x200 mm).",
"to add a default raft (Extra Margin = 15 mm).",
"to fit the slicing. As a workaround for printing the",
"fits the printers/slicers default limit. Does it really not matter",
"to 400 %. To improve bed adhesion I wanted to",
"simply adds the raft size to models max X and",
"add a default raft (Extra Margin = 15 mm). Unfortunately,",
"% = 190x200x200 mm). I have to reduce the scaling",
"a small support structure for better bed adhesion but I",
"I would prefer a raft. **Edit:** Sorry for leaving out",
"actually fits the printers/slicers default limit. Does it really not",
"4.13.1 as a slicer for my Ender 3 v2 printer.",
"small support structure for better bed adhesion but I would",
"printers/slicers default limit. Does it really not matter and cura",
"Cura 4.13.1 as a slicer for my Ender 3 v2",
"here](https://i.stack.imgur.com/9PC5q.png)](https://i.stack.imgur.com/9PC5q.png) So the raft actually fits the printers/slicers default limit.",
"171x183x180 mmm) to fit the slicing. As a workaround for",
"3 v2 printer. I want to print a model which",
"still within the printer's build volume (400 % = 190x200x200",
"raft actually fits the printers/slicers default limit. Does it really",
"mmm) to fit the slicing. As a workaround for printing",
"using Cura 4.13.1 as a slicer for my Ender 3",
"a raft. **Edit:** Sorry for leaving out the info about",
"15 mm). Unfortunately, Cura is not able to slice the",
"365 % (= 171x183x180 mmm) to fit the slicing. As",
"adhesion I wanted to add a default raft (Extra Margin",
"prefer a raft. **Edit:** Sorry for leaving out the info",
"the 220+raft limitation but my model is tapered downwards: [](https://i.stack.imgur.com/9PC5q.png) So the raft actually",
"the models form. I get the 220+raft limitation but my",
"(Extra Margin = 15 mm). Unfortunately, Cura is not able",
"out the info about the models form. I get the",
"workaround for printing the 400 % size, I will try",
"v2 printer. I want to print a model which I",
"bed adhesion I wanted to add a default raft (Extra",
"models form. I get the 220+raft limitation but my model",
"really not matter and cura simply adds the raft size",
"= 190x200x200 mm). I have to reduce the scaling to",
"printer's build volume (400 % = 190x200x200 mm). I have",
"(= 171x183x180 mmm) to fit the slicing. As a workaround",
"default limit. Does it really not matter and cura simply",
"to use a small support structure for better bed adhesion",
"I am using Cura 4.13.1 as a slicer for my",
"**Edit:** Sorry for leaving out the info about the models",
"a default raft (Extra Margin = 15 mm). Unfortunately, Cura",
"mm). I have to reduce the scaling to 365 %",
"So the raft actually fits the printers/slicers default limit. Does",
"slice the model despite being still within the printer's build",
"bed adhesion but I would prefer a raft. **Edit:** Sorry",
"for my Ender 3 v2 printer. I want to print",
"improve bed adhesion I wanted to add a default raft",
"which I scaled to 400 %. To improve bed adhesion",
"the slicing. As a workaround for printing the 400 %",
"get the 220+raft limitation but my model is tapered downwards:",
"limit. Does it really not matter and cura simply adds",
"220+raft limitation but my model is tapered downwards: [](https://i.stack.imgur.com/9PC5q.png) So",
"structure for better bed adhesion but I would prefer a",
"wanted to add a default raft (Extra Margin = 15",
"description here](https://i.stack.imgur.com/9PC5q.png)](https://i.stack.imgur.com/9PC5q.png) So the raft actually fits the printers/slicers default",
"for better bed adhesion but I would prefer a raft.",
"matter and cura simply adds the raft size to models",
"want to print a model which I scaled to 400",
"limitation but my model is tapered downwards: [](https://i.stack.imgur.com/9PC5q.png) So the raft actually fits the",
"To improve bed adhesion I wanted to add a default",
"the 400 % size, I will try to use a",
"form. I get the 220+raft limitation but my model is",
"190x200x200 mm). I have to reduce the scaling to 365",
"is not able to slice the model despite being still",
"leaving out the info about the models form. I get",
"raft. **Edit:** Sorry for leaving out the info about the",
"better bed adhesion but I would prefer a raft. **Edit:**",
"model is tapered downwards: [](https://i.stack.imgur.com/9PC5q.png) So the",
"model which I scaled to 400 %. To improve bed",
"will try to use a small support structure for better",
"the printers/slicers default limit. Does it really not matter and"
] |
[
"Print Preview of a 3D printed model showing where the",
"failure of a 3D printed model\") [![Screenshot of Cura's Print",
"250 °C / 65 °C Speeds: * Print speed: 80",
"Kobra Max * Material: PETG / PLA * Temperature: 250",
"of failure of a 3D printed model\") [![Screenshot of Cura's",
"thin piece. Theoretically, it could work, but Cura prints the",
"of failure of a 3D printed model\")](https://i.stack.imgur.com/nwP2L.png \"Photos and graphic",
"45 mm/s * Travel Speed: 100 mm/s * Initial layer",
"a 3D printed model showing where the failure happens\")](https://i.stack.imgur.com/F0Scr.png \"Screenshot",
"of a 3D printed model showing where the failure happens\")](https://i.stack.imgur.com/F0Scr.png",
"as you can see here. Is there a setting that",
"where the failure happens\")](https://i.stack.imgur.com/F0Scr.png \"Screenshot of Cura's Print Preview of",
"happens](https://i.stack.imgur.com/F0Scr.png \"Screenshot of Cura's Print Preview of a 3D printed",
"line that breaks apart as you can see here. Is",
"Cura to avoid creating such a line as the outer",
"else could I resolve this problem? * Printer: Kobra Max",
"the point of failure of a 3D printed model\") [![Screenshot",
"my case, it is just this line that breaks apart",
"creating such a line as the outer wall, or how",
"need to print a thin piece. Theoretically, it could work,",
"Initial layer speed 45 mm/s * Travel retraction speed: 40",
"PLA * Temperature: 250 °C / 65 °C Speeds: *",
"a 3D printed model\")](https://i.stack.imgur.com/nwP2L.png \"Photos and graphic showing the point",
"could work, but Cura prints the walls as single lines.",
"happens\")](https://i.stack.imgur.com/F0Scr.png \"Screenshot of Cura's Print Preview of a 3D printed",
"there a setting that would instruct Cura to avoid creating",
"Travel retraction speed: 40 mm/s [![Photos and graphic showing the",
"45 mm/s * Inner Wall Speed: 80 mm/s * Top/Bottom",
"3D printed model\")](https://i.stack.imgur.com/nwP2L.png \"Photos and graphic showing the point of",
"mm/s * Travel retraction speed: 40 mm/s [![Photos and graphic",
"model showing where the failure happens\")](https://i.stack.imgur.com/F0Scr.png \"Screenshot of Cura's Print",
"lines. In my case, it is just this line that",
"the walls as single lines. In my case, it is",
"graphic showing the point of failure of a 3D printed",
"case, it is just this line that breaks apart as",
"Print speed: 80 mm/s * Outer Wall Speed: 45 mm/s",
"°C / 65 °C Speeds: * Print speed: 80 mm/s",
"mm/s [![Photos and graphic showing the point of failure of",
"showing the point of failure of a 3D printed model](https://i.stack.imgur.com/nwP2L.png",
"Wall Speed: 45 mm/s * Inner Wall Speed: 80 mm/s",
"3D printed model](https://i.stack.imgur.com/nwP2L.png \"Photos and graphic showing the point of",
"breaks apart as you can see here. Is there a",
"\"Photos and graphic showing the point of failure of a",
"printed model showing where the failure happens](https://i.stack.imgur.com/F0Scr.png \"Screenshot of Cura's",
"* Print speed: 80 mm/s * Outer Wall Speed: 45",
"[![Photos and graphic showing the point of failure of a",
"Theoretically, it could work, but Cura prints the walls as",
"Material: PETG / PLA * Temperature: 250 °C / 65",
"80 mm/s * Outer Wall Speed: 45 mm/s * Inner",
"instruct Cura to avoid creating such a line as the",
"a 3D printed model\") [![Screenshot of Cura's Print Preview of",
"to avoid creating such a line as the outer wall,",
"work, but Cura prints the walls as single lines. In",
"as single lines. In my case, it is just this",
"it could work, but Cura prints the walls as single",
"* Temperature: 250 °C / 65 °C Speeds: * Print",
"line as the outer wall, or how else could I",
"In my case, it is just this line that breaks",
"failure happens](https://i.stack.imgur.com/F0Scr.png \"Screenshot of Cura's Print Preview of a 3D",
"and graphic showing the point of failure of a 3D",
"point of failure of a 3D printed model\")](https://i.stack.imgur.com/nwP2L.png \"Photos and",
"outer wall, or how else could I resolve this problem?",
"of a 3D printed model](https://i.stack.imgur.com/nwP2L.png \"Photos and graphic showing the",
"the failure happens](https://i.stack.imgur.com/F0Scr.png \"Screenshot of Cura's Print Preview of a",
"/ PLA * Temperature: 250 °C / 65 °C Speeds:",
"40 mm/s [![Photos and graphic showing the point of failure",
"the point of failure of a 3D printed model\")](https://i.stack.imgur.com/nwP2L.png \"Photos",
"model showing where the failure happens](https://i.stack.imgur.com/F0Scr.png \"Screenshot of Cura's Print",
"failure happens\")](https://i.stack.imgur.com/F0Scr.png \"Screenshot of Cura's Print Preview of a 3D",
"100 mm/s * Initial layer speed 45 mm/s * Travel",
"mm/s * Travel Speed: 100 mm/s * Initial layer speed",
"would instruct Cura to avoid creating such a line as",
"is just this line that breaks apart as you can",
"apart as you can see here. Is there a setting",
"avoid creating such a line as the outer wall, or",
"Cura's Print Preview of a 3D printed model showing where",
"* Outer Wall Speed: 45 mm/s * Inner Wall Speed:",
"Max * Material: PETG / PLA * Temperature: 250 °C",
"Outer Wall Speed: 45 mm/s * Inner Wall Speed: 80",
"a 3D printed model showing where the failure happens](https://i.stack.imgur.com/F0Scr.png \"Screenshot",
"model\")](https://i.stack.imgur.com/nwP2L.png \"Photos and graphic showing the point of failure of",
"\"Screenshot of Cura's Print Preview of a 3D printed model",
"speed: 80 mm/s * Outer Wall Speed: 45 mm/s *",
"a line as the outer wall, or how else could",
"model](https://i.stack.imgur.com/nwP2L.png \"Photos and graphic showing the point of failure of",
"piece. Theoretically, it could work, but Cura prints the walls",
"it is just this line that breaks apart as you",
"showing where the failure happens\")](https://i.stack.imgur.com/F0Scr.png \"Screenshot of Cura's Print Preview",
"printed model showing where the failure happens\")](https://i.stack.imgur.com/F0Scr.png \"Screenshot of Cura's",
"a thin piece. Theoretically, it could work, but Cura prints",
"the failure happens\")](https://i.stack.imgur.com/F0Scr.png \"Screenshot of Cura's Print Preview of a",
"a 3D printed model](https://i.stack.imgur.com/nwP2L.png \"Photos and graphic showing the point",
"showing where the failure happens](https://i.stack.imgur.com/F0Scr.png \"Screenshot of Cura's Print Preview",
"80 mm/s * Top/Bottom Speed: 45 mm/s * Travel Speed:",
"Speed: 80 mm/s * Top/Bottom Speed: 45 mm/s * Travel",
"Inner Wall Speed: 80 mm/s * Top/Bottom Speed: 45 mm/s",
"Temperature: 250 °C / 65 °C Speeds: * Print speed:",
"retraction speed: 40 mm/s [![Photos and graphic showing the point",
"* Travel retraction speed: 40 mm/s [![Photos and graphic showing",
"Cura prints the walls as single lines. In my case,",
"setting that would instruct Cura to avoid creating such a",
"the point of failure of a 3D printed model](https://i.stack.imgur.com/nwP2L.png \"Photos",
"65 °C Speeds: * Print speed: 80 mm/s * Outer",
"to print a thin piece. Theoretically, it could work, but",
"printed model\")](https://i.stack.imgur.com/nwP2L.png \"Photos and graphic showing the point of failure",
"Printer: Kobra Max * Material: PETG / PLA * Temperature:",
"I resolve this problem? * Printer: Kobra Max * Material:",
"PETG / PLA * Temperature: 250 °C / 65 °C",
"mm/s * Initial layer speed 45 mm/s * Travel retraction",
"I need to print a thin piece. Theoretically, it could",
"Speed: 100 mm/s * Initial layer speed 45 mm/s *",
"* Printer: Kobra Max * Material: PETG / PLA *",
"Top/Bottom Speed: 45 mm/s * Travel Speed: 100 mm/s *",
"could I resolve this problem? * Printer: Kobra Max *",
"* Top/Bottom Speed: 45 mm/s * Travel Speed: 100 mm/s",
"speed: 40 mm/s [![Photos and graphic showing the point of",
"print a thin piece. Theoretically, it could work, but Cura",
"just this line that breaks apart as you can see",
"such a line as the outer wall, or how else",
"of a 3D printed model\")](https://i.stack.imgur.com/nwP2L.png \"Photos and graphic showing the",
"mm/s * Outer Wall Speed: 45 mm/s * Inner Wall",
"[![Screenshot of Cura's Print Preview of a 3D printed model",
"point of failure of a 3D printed model\") [![Screenshot of",
"* Initial layer speed 45 mm/s * Travel retraction speed:",
"that would instruct Cura to avoid creating such a line",
"printed model](https://i.stack.imgur.com/nwP2L.png \"Photos and graphic showing the point of failure",
"mm/s * Inner Wall Speed: 80 mm/s * Top/Bottom Speed:",
"3D printed model\") [![Screenshot of Cura's Print Preview of a",
"of a 3D printed model\") [![Screenshot of Cura's Print Preview",
"the outer wall, or how else could I resolve this",
"this problem? * Printer: Kobra Max * Material: PETG /",
"point of failure of a 3D printed model](https://i.stack.imgur.com/nwP2L.png \"Photos and",
"printed model\") [![Screenshot of Cura's Print Preview of a 3D",
"see here. Is there a setting that would instruct Cura",
"a setting that would instruct Cura to avoid creating such",
"Speed: 45 mm/s * Travel Speed: 100 mm/s * Initial",
"/ 65 °C Speeds: * Print speed: 80 mm/s *",
"* Material: PETG / PLA * Temperature: 250 °C /",
"as the outer wall, or how else could I resolve",
"speed 45 mm/s * Travel retraction speed: 40 mm/s [![Photos",
"failure of a 3D printed model](https://i.stack.imgur.com/nwP2L.png \"Photos and graphic showing",
"prints the walls as single lines. In my case, it",
"showing the point of failure of a 3D printed model\")](https://i.stack.imgur.com/nwP2L.png",
"Is there a setting that would instruct Cura to avoid",
"where the failure happens](https://i.stack.imgur.com/F0Scr.png \"Screenshot of Cura's Print Preview of",
"of a 3D printed model showing where the failure happens](https://i.stack.imgur.com/F0Scr.png",
"* Travel Speed: 100 mm/s * Initial layer speed 45",
"* Inner Wall Speed: 80 mm/s * Top/Bottom Speed: 45",
"3D printed model showing where the failure happens](https://i.stack.imgur.com/F0Scr.png \"Screenshot of",
"of a 3D printed model showing where the failure happens\")",
"mm/s * Top/Bottom Speed: 45 mm/s * Travel Speed: 100",
"single lines. In my case, it is just this line",
"resolve this problem? * Printer: Kobra Max * Material: PETG",
"but Cura prints the walls as single lines. In my",
"Travel Speed: 100 mm/s * Initial layer speed 45 mm/s",
"can see here. Is there a setting that would instruct",
"layer speed 45 mm/s * Travel retraction speed: 40 mm/s",
"how else could I resolve this problem? * Printer: Kobra",
"wall, or how else could I resolve this problem? *",
"you can see here. Is there a setting that would",
"of Cura's Print Preview of a 3D printed model showing",
"failure of a 3D printed model\")](https://i.stack.imgur.com/nwP2L.png \"Photos and graphic showing",
"Preview of a 3D printed model showing where the failure",
"Speeds: * Print speed: 80 mm/s * Outer Wall Speed:",
"showing the point of failure of a 3D printed model\")",
"of failure of a 3D printed model](https://i.stack.imgur.com/nwP2L.png \"Photos and graphic",
"problem? * Printer: Kobra Max * Material: PETG / PLA",
"this line that breaks apart as you can see here.",
"or how else could I resolve this problem? * Printer:",
"that breaks apart as you can see here. Is there",
"walls as single lines. In my case, it is just",
"here. Is there a setting that would instruct Cura to",
"model\") [![Screenshot of Cura's Print Preview of a 3D printed",
"Speed: 45 mm/s * Inner Wall Speed: 80 mm/s *",
"Wall Speed: 80 mm/s * Top/Bottom Speed: 45 mm/s *",
"3D printed model showing where the failure happens\")](https://i.stack.imgur.com/F0Scr.png \"Screenshot of",
"°C Speeds: * Print speed: 80 mm/s * Outer Wall",
"45 mm/s * Travel retraction speed: 40 mm/s [![Photos and"
] |
[
"printer before due to work. I swapped the stepper driver",
"print at 200 °C), the extruder once again only extruded",
"load\" with the Bowden tube connected and the hotend heated",
"is missing some steps but for now it seems to",
"It seems that this is the root cause of the",
"the exact measurement, though approximately 30 mm). The gears seem",
"might be wrong with the motor as the stepper driver",
"swapped the stepper driver with one of the others on",
"where my experience ends, can someone tell me how to",
"down the issue? I suppose it could be the motor",
"200 °C), the extruder once again only extruded a fraction",
"I had to adjust the E-Steps value from **92** to",
"forgotten to save the to eeprom when I updated the",
"(I don't remember the exact measurement, though approximately 30 mm).",
"hotend heated to 220 °C (using PLA I normally print",
"the e-steps again. Aaaand I just then I noticed I",
"I first cleaned the nozzle and ended up replacing the",
"to starting a calibration print that reset the value before",
"i3 Mega, I first cleaned the nozzle and ended up",
"issue though. When I repeated the test \"under load\" with",
"saved the settings and tried the e-steps under load. This",
"be the motor itself, a faulty stepper motor driver, loose",
"extruder only extruded ca. 23 mm though, so I had",
"a faulty stepper motor driver, loose cables, or the mainboard.",
"started a print that that caused the eeprom reset before",
"to 220 °C (using PLA I normally print at 200",
"on my Anycubic i3 Mega, I first cleaned the nozzle",
"I still believe this must mean that the motor is",
"once again only extruded a fraction of the supposed 100",
"cleaned the nozzle and ended up replacing the entire hotend",
"tried the e-steps under load. This time it worked, even",
"the e-steps to **398** again and saved this time. Last",
"After that I changed the e-steps to **398** again and",
"seem to be fine, and the filament that is pushed",
"starting a calibration print that reset the value before saving.",
"E-steps. It seems that this is the root cause of",
"and the hotend heated to 220 °C (using PLA I",
"gear doesn't seem to slip either. Unfortunately, that's where my",
"went on to check my E-steps. It seems that this",
"@Citadel:** When I bought the printer it had a spare",
"I tried with the swapped stepper driver and original e-steps",
"couldn't see any issues with it, I went on to",
"cables, or the mainboard. **Edit to @Citadel:** When I bought",
"before due to work. I swapped the stepper driver with",
"is not the driver. After that I changed the e-steps",
"with it. I simply replaced the old one with this",
"When I bought the printer it had a spare hot",
"I suppose it could be the motor itself, a faulty",
"save the new e-steps due to starting a calibration print",
"extruder once again only extruded a fraction of the supposed",
"or the mainboard. **Edit to @Citadel:** When I bought the",
"e-steps to **398** again and saved this time. Last time",
"value actually works but probably indicates that something might be",
"off, seemingly \"fixed\" the issue though. When I repeated the",
"to swap the motor. Thanks for your answers! TL;DR: forgot",
"it seems to print fine. If I get issues again",
"then I noticed I must have forgotten to save the",
"of the others on board and checked the e-steps again.",
"used `G1 E100 F100` to feed 100 mm of filament",
"the swapped stepper driver and original e-steps (**92**), but this",
"for your answers! TL;DR: forgot to save the new e-steps",
"100 mm (I don't remember the exact measurement, though approximately",
"under extrusion on my Anycubic i3 Mega, I first cleaned",
"saved this time. Last time I accidentally started a print",
"I went on to check my E-steps. It seems that",
"under load. This time it worked, even under load. I",
"against the small gear doesn't seem to slip either. Unfortunately,",
"changed the e-steps to **398** again and saved this time.",
"to proceed to narrow down the issue? I suppose it",
"motor itself, a faulty stepper motor driver, loose cables, or",
"and I couldn't see any issues with it, I went",
"to **398** again and saved this time. Last time I",
"ca. 23 mm though, so I had to adjust the",
"which already seemed way off, seemingly \"fixed\" the issue though.",
"could be the motor itself, a faulty stepper motor driver,",
"and the filament that is pushed against the small gear",
"the small gear doesn't seem to slip either. Unfortunately, that's",
"the eeprom reset before I saved the settings and tried",
"had to adjust the E-Steps value from **92** to **398**",
"connected and the hotend heated to 220 °C (using PLA",
"bought the printer it had a spare hot end that",
"though. When I repeated the test \"under load\" with the",
"with the swapped stepper driver and original e-steps (**92**), but",
"to adjust the E-Steps value from **92** to **398** which",
"to print fine. If I get issues again I'll next",
"to check my E-steps. It seems that this is the",
"nozzle. Since that did not help and I couldn't see",
"extreme under extrusion on my Anycubic i3 Mega, I first",
"issue? I suppose it could be the motor itself, a",
"but probably indicates that something might be wrong with the",
"that I changed the e-steps to **398** again and saved",
"**398** which already seemed way off, seemingly \"fixed\" the issue",
"the filament that is pushed against the small gear doesn't",
"that came with it. I simply replaced the old one",
"it could be the motor itself, a faulty stepper motor",
"any further hardware customization. **Edit2:** Sorry for the late update,",
"The gears seem to be fine, and the filament that",
"it had a spare hot end that came with it.",
"the issue. I removed the Bowden tube to have no",
"a print that that caused the eeprom reset before I",
"this one. I did not do any further hardware customization.",
"did not help and I couldn't see any issues with",
"ends, can someone tell me how to proceed to narrow",
"supposed 100 mm (I don't remember the exact measurement, though",
"stepper motor driver, loose cables, or the mainboard. **Edit to",
"new e-steps due to starting a calibration print that reset",
"of filament through the extruder. The extruder only extruded ca.",
"Last time I accidentally started a print that that caused",
"reset before I saved the settings and tried the e-steps",
"fix the issue. So the issue is not the driver.",
"220 °C (using PLA I normally print at 200 °C),",
"answers! TL;DR: forgot to save the new e-steps due to",
"it. I simply replaced the old one with this one.",
"already seemed way off, seemingly \"fixed\" the issue though. When",
"replacing the entire hotend + nozzle. Since that did not",
"the extruder once again only extruded a fraction of the",
"tube to have no resistance and used `G1 E100 F100`",
"mean that the motor is missing some steps but for",
"last time... So of course I tried with the swapped",
"with it, I went on to check my E-steps. It",
"wrong with the motor as the stepper driver is fine.",
"from **92** to **398** which already seemed way off, seemingly",
"eeprom when I updated the e-steps last time... So of",
"checked the e-steps again. Aaaand I just then I noticed",
"don't remember the exact measurement, though approximately 30 mm). The",
"23 mm though, so I had to adjust the E-Steps",
"the mainboard. **Edit to @Citadel:** When I bought the printer",
"even under load. I still believe this must mean that",
"still believe this must mean that the motor is missing",
"the e-steps under load. This time it worked, even under",
"motor is missing some steps but for now it seems",
"my Anycubic i3 Mega, I first cleaned the nozzle and",
"to work. I swapped the stepper driver with one of",
"experience ends, can someone tell me how to proceed to",
"I bought the printer it had a spare hot end",
"to **398** which already seemed way off, seemingly \"fixed\" the",
"and checked the e-steps again. Aaaand I just then I",
"mm of filament through the extruder. The extruder only extruded",
"the entire hotend + nozzle. Since that did not help",
"with the Bowden tube connected and the hotend heated to",
"so I had to adjust the E-Steps value from **92**",
"replaced the old one with this one. I did not",
"I simply replaced the old one with this one. I",
"issues with it, I went on to check my E-steps.",
"load. This time it worked, even under load. I still",
"and saved this time. Last time I accidentally started a",
"how to proceed to narrow down the issue? I suppose",
"extrusion on my Anycubic i3 Mega, I first cleaned the",
"that this is the root cause of the issue. I",
"repeated the test \"under load\" with the Bowden tube connected",
"for now it seems to print fine. If I get",
"get issues again I'll next try to swap the motor.",
"I get issues again I'll next try to swap the",
"someone tell me how to proceed to narrow down the",
"check the printer before due to work. I swapped the",
"due to work. I swapped the stepper driver with one",
"course I tried with the swapped stepper driver and original",
"and tried the e-steps under load. This time it worked,",
"loose cables, or the mainboard. **Edit to @Citadel:** When I",
"approximately 30 mm). The gears seem to be fine, and",
"Anycubic i3 Mega, I first cleaned the nozzle and ended",
"now it seems to print fine. If I get issues",
"to feed 100 mm of filament through the extruder. The",
"tried with the swapped stepper driver and original e-steps (**92**),",
"+ nozzle. Since that did not help and I couldn't",
"proceed to narrow down the issue? I suppose it could",
"the driver. After that I changed the e-steps to **398**",
"saving. New value actually works but probably indicates that something",
"either. Unfortunately, that's where my experience ends, can someone tell",
"my experience ends, can someone tell me how to proceed",
"had a spare hot end that came with it. I",
"again. Aaaand I just then I noticed I must have",
"under load. I still believe this must mean that the",
"seems to print fine. If I get issues again I'll",
"didn't fix the issue. So the issue is not the",
"works but probably indicates that something might be wrong with",
"Sorry for the late update, I wasn't able to check",
"save the to eeprom when I updated the e-steps last",
"printer it had a spare hot end that came with",
"stepper driver and original e-steps (**92**), but this didn't fix",
"missing some steps but for now it seems to print",
"work. I swapped the stepper driver with one of the",
"actually works but probably indicates that something might be wrong",
"the new e-steps due to starting a calibration print that",
"before I saved the settings and tried the e-steps under",
"print fine. If I get issues again I'll next try",
"time... So of course I tried with the swapped stepper",
"though, so I had to adjust the E-Steps value from",
"extruded a fraction of the supposed 100 mm (I don't",
"encountering extreme under extrusion on my Anycubic i3 Mega, I",
"suppose it could be the motor itself, a faulty stepper",
"to eeprom when I updated the e-steps last time... So",
"the Bowden tube connected and the hotend heated to 220",
"of the supposed 100 mm (I don't remember the exact",
"Aaaand I just then I noticed I must have forgotten",
"So of course I tried with the swapped stepper driver",
"driver. After that I changed the e-steps to **398** again",
"time I accidentally started a print that that caused the",
"the motor itself, a faulty stepper motor driver, loose cables,",
"swapped stepper driver and original e-steps (**92**), but this didn't",
"the Bowden tube to have no resistance and used `G1",
"noticed I must have forgotten to save the to eeprom",
"try to swap the motor. Thanks for your answers! TL;DR:",
"I saved the settings and tried the e-steps under load.",
"seemingly \"fixed\" the issue though. When I repeated the test",
"others on board and checked the e-steps again. Aaaand I",
"test \"under load\" with the Bowden tube connected and the",
"to save the to eeprom when I updated the e-steps",
"exact measurement, though approximately 30 mm). The gears seem to",
"able to check the printer before due to work. I",
"entire hotend + nozzle. Since that did not help and",
"again and saved this time. Last time I accidentally started",
"a fraction of the supposed 100 mm (I don't remember",
"help and I couldn't see any issues with it, I",
"F100` to feed 100 mm of filament through the extruder.",
"did not do any further hardware customization. **Edit2:** Sorry for",
"`G1 E100 F100` to feed 100 mm of filament through",
"measurement, though approximately 30 mm). The gears seem to be",
"the late update, I wasn't able to check the printer",
"Unfortunately, that's where my experience ends, can someone tell me",
"gears seem to be fine, and the filament that is",
"swap the motor. Thanks for your answers! TL;DR: forgot to",
"This time it worked, even under load. I still believe",
"me how to proceed to narrow down the issue? I",
"that the motor is missing some steps but for now",
"that did not help and I couldn't see any issues",
"print that reset the value before saving. New value actually",
"**Edit2:** Sorry for the late update, I wasn't able to",
"print that that caused the eeprom reset before I saved",
"issue is not the driver. After that I changed the",
"the nozzle and ended up replacing the entire hotend +",
"I removed the Bowden tube to have no resistance and",
"check my E-steps. It seems that this is the root",
"to check the printer before due to work. I swapped",
"original e-steps (**92**), but this didn't fix the issue. So",
"\"fixed\" the issue though. When I repeated the test \"under",
"fine. If I get issues again I'll next try to",
"do any further hardware customization. **Edit2:** Sorry for the late",
"late update, I wasn't able to check the printer before",
"believe this must mean that the motor is missing some",
"mm). The gears seem to be fine, and the filament",
"time it worked, even under load. I still believe this",
"issue. So the issue is not the driver. After that",
"stepper driver with one of the others on board and",
"forgot to save the new e-steps due to starting a",
"small gear doesn't seem to slip either. Unfortunately, that's where",
"nozzle and ended up replacing the entire hotend + nozzle.",
"After encountering extreme under extrusion on my Anycubic i3 Mega,",
"this is the root cause of the issue. I removed",
"accidentally started a print that that caused the eeprom reset",
"caused the eeprom reset before I saved the settings and",
"any issues with it, I went on to check my",
"can someone tell me how to proceed to narrow down",
"a calibration print that reset the value before saving. New",
"issues again I'll next try to swap the motor. Thanks",
"e-steps (**92**), but this didn't fix the issue. So the",
"cause of the issue. I removed the Bowden tube to",
"the old one with this one. I did not do",
"settings and tried the e-steps under load. This time it",
"slip either. Unfortunately, that's where my experience ends, can someone",
"feed 100 mm of filament through the extruder. The extruder",
"value from **92** to **398** which already seemed way off,",
"it, I went on to check my E-steps. It seems",
"I did not do any further hardware customization. **Edit2:** Sorry",
"So the issue is not the driver. After that I",
"faulty stepper motor driver, loose cables, or the mainboard. **Edit",
"removed the Bowden tube to have no resistance and used",
"(**92**), but this didn't fix the issue. So the issue",
"value before saving. New value actually works but probably indicates",
"one. I did not do any further hardware customization. **Edit2:**",
"of course I tried with the swapped stepper driver and",
"but this didn't fix the issue. So the issue is",
"If I get issues again I'll next try to swap",
"of the issue. I removed the Bowden tube to have",
"I must have forgotten to save the to eeprom when",
"\"under load\" with the Bowden tube connected and the hotend",
"be fine, and the filament that is pushed against the",
"the issue is not the driver. After that I changed",
"I swapped the stepper driver with one of the others",
"extruded ca. 23 mm though, so I had to adjust",
"wasn't able to check the printer before due to work.",
"**398** again and saved this time. Last time I accidentally",
"one of the others on board and checked the e-steps",
"is the root cause of the issue. I removed the",
"**92** to **398** which already seemed way off, seemingly \"fixed\"",
"the value before saving. New value actually works but probably",
"seemed way off, seemingly \"fixed\" the issue though. When I",
"Thanks for your answers! TL;DR: forgot to save the new",
"When I repeated the test \"under load\" with the Bowden",
"and original e-steps (**92**), but this didn't fix the issue.",
"your answers! TL;DR: forgot to save the new e-steps due",
"seem to slip either. Unfortunately, that's where my experience ends,",
"Since that did not help and I couldn't see any",
"I changed the e-steps to **398** again and saved this",
"only extruded a fraction of the supposed 100 mm (I",
"for the late update, I wasn't able to check the",
"way off, seemingly \"fixed\" the issue though. When I repeated",
"the test \"under load\" with the Bowden tube connected and",
"must have forgotten to save the to eeprom when I",
"hot end that came with it. I simply replaced the",
"have no resistance and used `G1 E100 F100` to feed",
"mainboard. **Edit to @Citadel:** When I bought the printer it",
"update, I wasn't able to check the printer before due",
"mm (I don't remember the exact measurement, though approximately 30",
"calibration print that reset the value before saving. New value",
"again only extruded a fraction of the supposed 100 mm",
"that that caused the eeprom reset before I saved the",
"with this one. I did not do any further hardware",
"worked, even under load. I still believe this must mean",
"old one with this one. I did not do any",
"mm though, so I had to adjust the E-Steps value",
"and used `G1 E100 F100` to feed 100 mm of",
"e-steps again. Aaaand I just then I noticed I must",
"driver, loose cables, or the mainboard. **Edit to @Citadel:** When",
"the root cause of the issue. I removed the Bowden",
"fine, and the filament that is pushed against the small",
"ended up replacing the entire hotend + nozzle. Since that",
"the e-steps last time... So of course I tried with",
"the issue? I suppose it could be the motor itself,",
"driver and original e-steps (**92**), but this didn't fix the",
"some steps but for now it seems to print fine.",
"simply replaced the old one with this one. I did",
"this must mean that the motor is missing some steps",
"though approximately 30 mm). The gears seem to be fine,",
"the issue. So the issue is not the driver. After",
"indicates that something might be wrong with the motor as",
"through the extruder. The extruder only extruded ca. 23 mm",
"the motor. Thanks for your answers! TL;DR: forgot to save",
"probably indicates that something might be wrong with the motor",
"tell me how to proceed to narrow down the issue?",
"New value actually works but probably indicates that something might",
"the printer before due to work. I swapped the stepper",
"Mega, I first cleaned the nozzle and ended up replacing",
"the others on board and checked the e-steps again. Aaaand",
"that reset the value before saving. New value actually works",
"is pushed against the small gear doesn't seem to slip",
"time. Last time I accidentally started a print that that",
"Bowden tube connected and the hotend heated to 220 °C",
"motor. Thanks for your answers! TL;DR: forgot to save the",
"not do any further hardware customization. **Edit2:** Sorry for the",
"not help and I couldn't see any issues with it,",
"one with this one. I did not do any further",
"that's where my experience ends, can someone tell me how",
"e-steps last time... So of course I tried with the",
"narrow down the issue? I suppose it could be the",
"customization. **Edit2:** Sorry for the late update, I wasn't able",
"heated to 220 °C (using PLA I normally print at",
"hardware customization. **Edit2:** Sorry for the late update, I wasn't",
"fraction of the supposed 100 mm (I don't remember the",
"itself, a faulty stepper motor driver, loose cables, or the",
"30 mm). The gears seem to be fine, and the",
"it worked, even under load. I still believe this must",
"I'll next try to swap the motor. Thanks for your",
"to slip either. Unfortunately, that's where my experience ends, can",
"see any issues with it, I went on to check",
"tube connected and the hotend heated to 220 °C (using",
"I just then I noticed I must have forgotten to",
"motor driver, loose cables, or the mainboard. **Edit to @Citadel:**",
"that is pushed against the small gear doesn't seem to",
"only extruded ca. 23 mm though, so I had to",
"PLA I normally print at 200 °C), the extruder once",
"came with it. I simply replaced the old one with",
"(using PLA I normally print at 200 °C), the extruder",
"**Edit to @Citadel:** When I bought the printer it had",
"before saving. New value actually works but probably indicates that",
"end that came with it. I simply replaced the old",
"be wrong with the motor as the stepper driver is",
"The extruder only extruded ca. 23 mm though, so I",
"°C), the extruder once again only extruded a fraction of",
"that caused the eeprom reset before I saved the settings",
"when I updated the e-steps last time... So of course",
"load. I still believe this must mean that the motor",
"due to starting a calibration print that reset the value",
"to have no resistance and used `G1 E100 F100` to",
"again I'll next try to swap the motor. Thanks for",
"no resistance and used `G1 E100 F100` to feed 100",
"have forgotten to save the to eeprom when I updated",
"the E-Steps value from **92** to **398** which already seemed",
"doesn't seem to slip either. Unfortunately, that's where my experience",
"steps but for now it seems to print fine. If",
"and ended up replacing the entire hotend + nozzle. Since",
"reset the value before saving. New value actually works but",
"to @Citadel:** When I bought the printer it had a",
"seems that this is the root cause of the issue.",
"I wasn't able to check the printer before due to",
"that something might be wrong with the motor as the",
"I normally print at 200 °C), the extruder once again",
"root cause of the issue. I removed the Bowden tube",
"but for now it seems to print fine. If I",
"not the driver. After that I changed the e-steps to",
"this time. Last time I accidentally started a print that",
"I couldn't see any issues with it, I went on",
"a spare hot end that came with it. I simply",
"e-steps due to starting a calibration print that reset the",
"first cleaned the nozzle and ended up replacing the entire",
"board and checked the e-steps again. Aaaand I just then",
"e-steps under load. This time it worked, even under load.",
"the printer it had a spare hot end that came",
"I accidentally started a print that that caused the eeprom",
"the issue though. When I repeated the test \"under load\"",
"E100 F100` to feed 100 mm of filament through the",
"resistance and used `G1 E100 F100` to feed 100 mm",
"100 mm of filament through the extruder. The extruder only",
"next try to swap the motor. Thanks for your answers!",
"on to check my E-steps. It seems that this is",
"the to eeprom when I updated the e-steps last time...",
"driver with one of the others on board and checked",
"spare hot end that came with it. I simply replaced",
"normally print at 200 °C), the extruder once again only",
"this didn't fix the issue. So the issue is not",
"pushed against the small gear doesn't seem to slip either.",
"Bowden tube to have no resistance and used `G1 E100",
"just then I noticed I must have forgotten to save",
"hotend + nozzle. Since that did not help and I",
"extruder. The extruder only extruded ca. 23 mm though, so",
"I noticed I must have forgotten to save the to",
"something might be wrong with the motor as the stepper",
"E-Steps value from **92** to **398** which already seemed way",
"eeprom reset before I saved the settings and tried the",
"to save the new e-steps due to starting a calibration",
"the stepper driver with one of the others on board",
"must mean that the motor is missing some steps but",
"up replacing the entire hotend + nozzle. Since that did",
"adjust the E-Steps value from **92** to **398** which already",
"the settings and tried the e-steps under load. This time",
"the extruder. The extruder only extruded ca. 23 mm though,",
"I repeated the test \"under load\" with the Bowden tube",
"further hardware customization. **Edit2:** Sorry for the late update, I",
"the supposed 100 mm (I don't remember the exact measurement,",
"to be fine, and the filament that is pushed against",
"on board and checked the e-steps again. Aaaand I just",
"my E-steps. It seems that this is the root cause",
"I updated the e-steps last time... So of course I",
"at 200 °C), the extruder once again only extruded a",
"°C (using PLA I normally print at 200 °C), the",
"with one of the others on board and checked the",
"filament that is pushed against the small gear doesn't seem",
"filament through the extruder. The extruder only extruded ca. 23",
"remember the exact measurement, though approximately 30 mm). The gears",
"to narrow down the issue? I suppose it could be",
"issue. I removed the Bowden tube to have no resistance",
"the hotend heated to 220 °C (using PLA I normally",
"TL;DR: forgot to save the new e-steps due to starting",
"updated the e-steps last time... So of course I tried",
"the motor is missing some steps but for now it"
] |
[
"Ender3 32bit 4.2.7 firmware, but it did happens too. The",
"did happens too. The e-steps for the filament length have",
"if I manually hold the filament back, it springs back.",
"with a new Mobo, the 4.2.7 version. My current setup",
"did use at first the Ender3 32bit 4.2.7 firmware, but",
"Specifications: * Ender 3 * Upgraded Motherboard 4.2.7 (Silent Stepper",
"else is in stock Prior to the mobo upgrade, everything",
"fine. Now I'm having problems with the extruder. I did",
"stock Prior to the mobo upgrade, everything was working fine.",
"with the filament to the back; sometimes even 8-10 mm.",
"extruder, the extruder stepper starts grinding and jumping/rewinding the extruder",
"Version 2.1.x * New metal extruder handle * Replacement bed",
"firmware, but it did happens too. The e-steps for the",
"voltage for the drivers? How to adjust the drivers? Any",
"find the required voltage for the drivers? How to adjust",
"handle * Replacement bed springs * New complete hot end",
"or where can I find the required voltage for the",
"the 4.2.7 version. My current setup is: Printer Specifications: *",
"been adjusted. Once I start spinning the extruder, the extruder",
"back; sometimes even 8-10 mm. Also, if I manually hold",
"much power the driver needs and gets. How or where",
"problems with the extruder. I did use at first the",
"Stepper Drivers) * Marlin FW Upgrade to Version 2.1.x *",
"first the Ender3 32bit 4.2.7 firmware, but it did happens",
"* Upgraded Motherboard 4.2.7 (Silent Stepper Drivers) * Marlin FW",
"grinding and jumping/rewinding the extruder wheel with the filament to",
"4.2.7 version. My current setup is: Printer Specifications: * Ender",
"current setup is: Printer Specifications: * Ender 3 * Upgraded",
"filament to the back; sometimes even 8-10 mm. Also, if",
"my Ender 3 with a new Mobo, the 4.2.7 version.",
"a new Mobo, the 4.2.7 version. My current setup is:",
"extruder handle * Replacement bed springs * New complete hot",
"* New complete hot end * Everything else is in",
"Everything else is in stock Prior to the mobo upgrade,",
"but it did happens too. The e-steps for the filament",
"that there is no power/power coming from the stepper motor.",
"filament length have been adjusted. Once I start spinning the",
"even 8-10 mm. Also, if I manually hold the filament",
"Ender 3 * Upgraded Motherboard 4.2.7 (Silent Stepper Drivers) *",
"in stock Prior to the mobo upgrade, everything was working",
"the filament length have been adjusted. Once I start spinning",
"manually hold the filament back, it springs back. It seems",
"* Ender 3 * Upgraded Motherboard 4.2.7 (Silent Stepper Drivers)",
"Now I'm having problems with the extruder. I did use",
"coming from the stepper motor. So I would like to",
"the extruder. I did use at first the Ender3 32bit",
"Mobo, the 4.2.7 version. My current setup is: Printer Specifications:",
"Ender 3 with a new Mobo, the 4.2.7 version. My",
"the extruder wheel with the filament to the back; sometimes",
"Once I start spinning the extruder, the extruder stepper starts",
"hot end * Everything else is in stock Prior to",
"setup is: Printer Specifications: * Ender 3 * Upgraded Motherboard",
"adjusted. Once I start spinning the extruder, the extruder stepper",
"working fine. Now I'm having problems with the extruder. I",
"to Version 2.1.x * New metal extruder handle * Replacement",
"can I find the required voltage for the drivers? How",
"32bit 4.2.7 firmware, but it did happens too. The e-steps",
"starts grinding and jumping/rewinding the extruder wheel with the filament",
"4.2.7 (Silent Stepper Drivers) * Marlin FW Upgrade to Version",
"hold the filament back, it springs back. It seems that",
"the stepper motor. So I would like to check how",
"mobo upgrade, everything was working fine. Now I'm having problems",
"the mobo upgrade, everything was working fine. Now I'm having",
"jumping/rewinding the extruder wheel with the filament to the back;",
"* New metal extruder handle * Replacement bed springs *",
"I manually hold the filament back, it springs back. It",
"upgrade, everything was working fine. Now I'm having problems with",
"the back; sometimes even 8-10 mm. Also, if I manually",
"the required voltage for the drivers? How to adjust the",
"having problems with the extruder. I did use at first",
"The e-steps for the filament length have been adjusted. Once",
"like to check how much power the driver needs and",
"3 with a new Mobo, the 4.2.7 version. My current",
"version. My current setup is: Printer Specifications: * Ender 3",
"from the stepper motor. So I would like to check",
"the filament back, it springs back. It seems that there",
"the extruder, the extruder stepper starts grinding and jumping/rewinding the",
"metal extruder handle * Replacement bed springs * New complete",
"the driver needs and gets. How or where can I",
"extruder. I did use at first the Ender3 32bit 4.2.7",
"too. The e-steps for the filament length have been adjusted.",
"the Ender3 32bit 4.2.7 firmware, but it did happens too.",
"How or where can I find the required voltage for",
"FW Upgrade to Version 2.1.x * New metal extruder handle",
"check how much power the driver needs and gets. How",
"3 * Upgraded Motherboard 4.2.7 (Silent Stepper Drivers) * Marlin",
"power/power coming from the stepper motor. So I would like",
"for the drivers? How to adjust the drivers? Any tips",
"Drivers) * Marlin FW Upgrade to Version 2.1.x * New",
"motor. So I would like to check how much power",
"the drivers? How to adjust the drivers? Any tips or",
"I did use at first the Ender3 32bit 4.2.7 firmware,",
"seems that there is no power/power coming from the stepper",
"and gets. How or where can I find the required",
"happens too. The e-steps for the filament length have been",
"it did happens too. The e-steps for the filament length",
"extruder wheel with the filament to the back; sometimes even",
"everything was working fine. Now I'm having problems with the",
"wheel with the filament to the back; sometimes even 8-10",
"I start spinning the extruder, the extruder stepper starts grinding",
"start spinning the extruder, the extruder stepper starts grinding and",
"sometimes even 8-10 mm. Also, if I manually hold the",
"how much power the driver needs and gets. How or",
"Upgrade to Version 2.1.x * New metal extruder handle *",
"power the driver needs and gets. How or where can",
"needs and gets. How or where can I find the",
"the extruder stepper starts grinding and jumping/rewinding the extruder wheel",
"was working fine. Now I'm having problems with the extruder.",
"8-10 mm. Also, if I manually hold the filament back,",
"springs * New complete hot end * Everything else is",
"where can I find the required voltage for the drivers?",
"2.1.x * New metal extruder handle * Replacement bed springs",
"I'm having problems with the extruder. I did use at",
"e-steps for the filament length have been adjusted. Once I",
"spinning the extruder, the extruder stepper starts grinding and jumping/rewinding",
"required voltage for the drivers? How to adjust the drivers?",
"Upgraded Motherboard 4.2.7 (Silent Stepper Drivers) * Marlin FW Upgrade",
"Also, if I manually hold the filament back, it springs",
"length have been adjusted. Once I start spinning the extruder,",
"So I would like to check how much power the",
"end * Everything else is in stock Prior to the",
"bed springs * New complete hot end * Everything else",
"back, it springs back. It seems that there is no",
"springs back. It seems that there is no power/power coming",
"Printer Specifications: * Ender 3 * Upgraded Motherboard 4.2.7 (Silent",
"to adjust the drivers? Any tips or references are welcome.",
"to the mobo upgrade, everything was working fine. Now I'm",
"stepper starts grinding and jumping/rewinding the extruder wheel with the",
"to the back; sometimes even 8-10 mm. Also, if I",
"it springs back. It seems that there is no power/power",
"is no power/power coming from the stepper motor. So I",
"Marlin FW Upgrade to Version 2.1.x * New metal extruder",
"drivers? How to adjust the drivers? Any tips or references",
"How to adjust the drivers? Any tips or references are",
"there is no power/power coming from the stepper motor. So",
"filament back, it springs back. It seems that there is",
"back. It seems that there is no power/power coming from",
"is in stock Prior to the mobo upgrade, everything was",
"* Marlin FW Upgrade to Version 2.1.x * New metal",
"4.2.7 firmware, but it did happens too. The e-steps for",
"* Replacement bed springs * New complete hot end *",
"for the filament length have been adjusted. Once I start",
"I upgraded my Ender 3 with a new Mobo, the",
"Replacement bed springs * New complete hot end * Everything",
"New metal extruder handle * Replacement bed springs * New",
"extruder stepper starts grinding and jumping/rewinding the extruder wheel with",
"New complete hot end * Everything else is in stock",
"Prior to the mobo upgrade, everything was working fine. Now",
"with the extruder. I did use at first the Ender3",
"at first the Ender3 32bit 4.2.7 firmware, but it did",
"mm. Also, if I manually hold the filament back, it",
"and jumping/rewinding the extruder wheel with the filament to the",
"complete hot end * Everything else is in stock Prior",
"It seems that there is no power/power coming from the",
"to check how much power the driver needs and gets.",
"My current setup is: Printer Specifications: * Ender 3 *",
"have been adjusted. Once I start spinning the extruder, the",
"Motherboard 4.2.7 (Silent Stepper Drivers) * Marlin FW Upgrade to",
"upgraded my Ender 3 with a new Mobo, the 4.2.7",
"would like to check how much power the driver needs",
"new Mobo, the 4.2.7 version. My current setup is: Printer",
"no power/power coming from the stepper motor. So I would",
"is: Printer Specifications: * Ender 3 * Upgraded Motherboard 4.2.7",
"stepper motor. So I would like to check how much",
"I find the required voltage for the drivers? How to",
"the filament to the back; sometimes even 8-10 mm. Also,",
"* Everything else is in stock Prior to the mobo",
"gets. How or where can I find the required voltage",
"driver needs and gets. How or where can I find",
"(Silent Stepper Drivers) * Marlin FW Upgrade to Version 2.1.x",
"use at first the Ender3 32bit 4.2.7 firmware, but it",
"I would like to check how much power the driver"
] |
[
"temp)](https://i.stack.imgur.com/pjHYz.jpg \"Calibration cubes (before and after increasing flow and temp)\")](https://i.stack.imgur.com/pjHYz.jpg",
"calibration is okay (I print 10 cm and 10 cm",
"temperature by 10 °C (I'm now printing at 220 °C....)",
"by 10 °C (I'm now printing at 220 °C....) actually",
"and after increasing flow and temp)](https://i.stack.imgur.com/pjHYz.jpg \"Calibration cubes (before and",
"10 cm of filament are consumed through a hot nozzle).",
"problem could be under extrusion. I replaced the fan (both",
"already successfully printed before -> Nothing helped! Then I was",
"more solid) even if under extrusion is still appreciable. Calibration",
"good. From what I understood looking around, the problem could",
"whatsoever. This is what I tried so far: * printing",
"10 °C (I'm now printing at 220 °C....) actually gives",
"been printing for almost a year with good results. Then,",
"is still appreciable. Calibration cubes: [![Calibration cubes (before and after",
"million times * printing different projects, included those who I",
"10 cm and 10 cm of filament are consumed through",
"and after increasing flow and temp)\")](https://i.stack.imgur.com/pjHYz.jpg \"Calibration cubes (before and",
"fan started to be noisy and the prints came out",
"be noisy and the prints came out definitely not good.",
"cm and 10 cm of filament are consumed through a",
"flow by 5 % and the temperature by 10 °C",
"results. Then, all of a sudden, the fan started to",
"\"Printing example\") I don't know what else to try!!! Can",
"almost a year with good results. Then, all of a",
"[![Calibration cubes (before and after increasing flow and temp)](https://i.stack.imgur.com/pjHYz.jpg \"Calibration",
"is always the same (Cura) and I never changed any",
"with the new version nothing changed. Now the extruder calibration",
"printing with (four) different filaments (always PLA though). * changing",
"temp)\") Printing example: [![Printing example](https://i.stack.imgur.com/54sFZ.jpg \"Printing example\")](https://i.stack.imgur.com/54sFZ.jpg \"Printing example\") I",
"(Cura) and I never changed any parameter whatsoever. This is",
"and after increasing flow and temp)\") Printing example: [![Printing example](https://i.stack.imgur.com/54sFZ.jpg",
"having some problem with my Ender 3. I have been",
"unclogging and replacing the nozzle (twice) * re-calibrating Z like",
"cubes (before and after increasing flow and temp)\") Printing example:",
"to be noisy and the prints came out definitely not",
"and the prints came out definitely not good. From what",
"extruder calibration is okay (I print 10 cm and 10",
"gives better results (the calibration cube is more definite and",
"successfully printed before -> Nothing helped! Then I was forced",
"a year with good results. Then, all of a sudden,",
"a sudden, the fan started to be noisy and the",
"change the software (because my PC died...) But even with",
"of filament are consumed through a hot nozzle). Increasing the",
"is more definite and more solid) even if under extrusion",
"I don't know what else to try!!! Can someone help",
"(the calibration cube is more definite and more solid) even",
"(before and after increasing flow and temp)](https://i.stack.imgur.com/pjHYz.jpg \"Calibration cubes (before",
"prints keep coming out badly. The software is always the",
"Z like a million times * printing different projects, included",
"those who I already successfully printed before -> Nothing helped!",
"* printing different projects, included those who I already successfully",
"helped! Then I was forced to also change the software",
"is okay (I print 10 cm and 10 cm of",
"filament are consumed through a hot nozzle). Increasing the flow",
"never changed any parameter whatsoever. This is what I tried",
"far: * printing with (four) different filaments (always PLA though).",
"consumed through a hot nozzle). Increasing the flow by 5",
"same (Cura) and I never changed any parameter whatsoever. This",
"increasing flow and temp)\") Printing example: [![Printing example](https://i.stack.imgur.com/54sFZ.jpg \"Printing example\")](https://i.stack.imgur.com/54sFZ.jpg",
"so far: * printing with (four) different filaments (always PLA",
"Now the extruder calibration is okay (I print 10 cm",
"increasing flow and temp)\")](https://i.stack.imgur.com/pjHYz.jpg \"Calibration cubes (before and after increasing",
"definite and more solid) even if under extrusion is still",
"to also change the software (because my PC died...) But",
"noisy and the prints came out definitely not good. From",
"actually) but the prints keep coming out badly. The software",
"changed any parameter whatsoever. This is what I tried so",
"is what I tried so far: * printing with (four)",
"okay (I print 10 cm and 10 cm of filament",
"print 10 cm and 10 cm of filament are consumed",
"at 220 °C....) actually gives better results (the calibration cube",
"looking around, the problem could be under extrusion. I replaced",
"example](https://i.stack.imgur.com/54sFZ.jpg \"Printing example\")](https://i.stack.imgur.com/54sFZ.jpg \"Printing example\") I don't know what else",
"are consumed through a hot nozzle). Increasing the flow by",
"re-calibrating Z like a million times * printing different projects,",
"the extruder calibration is okay (I print 10 cm and",
"Ender 3. I have been printing for almost a year",
"with my Ender 3. I have been printing for almost",
"but the prints keep coming out badly. The software is",
"calibration cube is more definite and more solid) even if",
"This is what I tried so far: * printing with",
"220 °C....) actually gives better results (the calibration cube is",
"cubes: [![Calibration cubes (before and after increasing flow and temp)](https://i.stack.imgur.com/pjHYz.jpg",
"nothing changed. Now the extruder calibration is okay (I print",
"I tried so far: * printing with (four) different filaments",
"badly. The software is always the same (Cura) and I",
"printing different projects, included those who I already successfully printed",
"nozzle). Increasing the flow by 5 % and the temperature",
"keep coming out badly. The software is always the same",
"example: [![Printing example](https://i.stack.imgur.com/54sFZ.jpg \"Printing example\")](https://i.stack.imgur.com/54sFZ.jpg \"Printing example\") I don't know",
"Calibration cubes: [![Calibration cubes (before and after increasing flow and",
"But even with the new version nothing changed. Now the",
"still appreciable. Calibration cubes: [![Calibration cubes (before and after increasing",
"even if under extrusion is still appreciable. Calibration cubes: [![Calibration",
"and 10 cm of filament are consumed through a hot",
"the same (Cura) and I never changed any parameter whatsoever.",
"better results (the calibration cube is more definite and more",
"\"Calibration cubes (before and after increasing flow and temp)\") Printing",
"after increasing flow and temp)\") Printing example: [![Printing example](https://i.stack.imgur.com/54sFZ.jpg \"Printing",
"(twice) * re-calibrating Z like a million times * printing",
"tried so far: * printing with (four) different filaments (always",
"came out definitely not good. From what I understood looking",
"good results. Then, all of a sudden, the fan started",
"be under extrusion. I replaced the fan (both of them",
"and temp)\") Printing example: [![Printing example](https://i.stack.imgur.com/54sFZ.jpg \"Printing example\")](https://i.stack.imgur.com/54sFZ.jpg \"Printing example\")",
"I never changed any parameter whatsoever. This is what I",
"* printing with (four) different filaments (always PLA though). *",
"% and the temperature by 10 °C (I'm now printing",
"them actually) but the prints keep coming out badly. The",
"cm of filament are consumed through a hot nozzle). Increasing",
"example\") I don't know what else to try!!! Can someone",
"the fan (both of them actually) but the prints keep",
"(always PLA though). * changing the E-steps * unclogging and",
"and temp)](https://i.stack.imgur.com/pjHYz.jpg \"Calibration cubes (before and after increasing flow and",
"problem with my Ender 3. I have been printing for",
"my Ender 3. I have been printing for almost a",
"even with the new version nothing changed. Now the extruder",
"a million times * printing different projects, included those who",
"more definite and more solid) even if under extrusion is",
"extrusion. I replaced the fan (both of them actually) but",
"around, the problem could be under extrusion. I replaced the",
"my PC died...) But even with the new version nothing",
"(I'm now printing at 220 °C....) actually gives better results",
"flow and temp)\") Printing example: [![Printing example](https://i.stack.imgur.com/54sFZ.jpg \"Printing example\")](https://i.stack.imgur.com/54sFZ.jpg \"Printing",
"increasing flow and temp)](https://i.stack.imgur.com/pjHYz.jpg \"Calibration cubes (before and after increasing",
"Increasing the flow by 5 % and the temperature by",
"for almost a year with good results. Then, all of",
"out badly. The software is always the same (Cura) and",
"nozzle (twice) * re-calibrating Z like a million times *",
"before -> Nothing helped! Then I was forced to also",
"and the temperature by 10 °C (I'm now printing at",
"flow and temp)\")](https://i.stack.imgur.com/pjHYz.jpg \"Calibration cubes (before and after increasing flow",
"actually gives better results (the calibration cube is more definite",
"don't know what else to try!!! Can someone help me?",
"fan (both of them actually) but the prints keep coming",
"cube is more definite and more solid) even if under",
"\"Calibration cubes (before and after increasing flow and temp)\")](https://i.stack.imgur.com/pjHYz.jpg \"Calibration",
"coming out badly. The software is always the same (Cura)",
"the nozzle (twice) * re-calibrating Z like a million times",
"printing at 220 °C....) actually gives better results (the calibration",
"of a sudden, the fan started to be noisy and",
"replacing the nozzle (twice) * re-calibrating Z like a million",
"through a hot nozzle). Increasing the flow by 5 %",
"the fan started to be noisy and the prints came",
"any parameter whatsoever. This is what I tried so far:",
"the problem could be under extrusion. I replaced the fan",
"changed. Now the extruder calibration is okay (I print 10",
"hot nozzle). Increasing the flow by 5 % and the",
"with (four) different filaments (always PLA though). * changing the",
"PLA though). * changing the E-steps * unclogging and replacing",
"°C (I'm now printing at 220 °C....) actually gives better",
"what I tried so far: * printing with (four) different",
"and replacing the nozzle (twice) * re-calibrating Z like a",
"not good. From what I understood looking around, the problem",
"I was forced to also change the software (because my",
"by 5 % and the temperature by 10 °C (I'm",
"temp)\")](https://i.stack.imgur.com/pjHYz.jpg \"Calibration cubes (before and after increasing flow and temp)\")",
"the temperature by 10 °C (I'm now printing at 220",
"replaced the fan (both of them actually) but the prints",
"now printing at 220 °C....) actually gives better results (the",
"* changing the E-steps * unclogging and replacing the nozzle",
"if under extrusion is still appreciable. Calibration cubes: [![Calibration cubes",
"some problem with my Ender 3. I have been printing",
"* re-calibrating Z like a million times * printing different",
"always the same (Cura) and I never changed any parameter",
"software is always the same (Cura) and I never changed",
"the prints came out definitely not good. From what I",
"and more solid) even if under extrusion is still appreciable.",
"°C....) actually gives better results (the calibration cube is more",
"(I print 10 cm and 10 cm of filament are",
"all of a sudden, the fan started to be noisy",
"5 % and the temperature by 10 °C (I'm now",
"printing for almost a year with good results. Then, all",
"with good results. Then, all of a sudden, the fan",
"who I already successfully printed before -> Nothing helped! Then",
"could be under extrusion. I replaced the fan (both of",
"forced to also change the software (because my PC died...)",
"* unclogging and replacing the nozzle (twice) * re-calibrating Z",
"(before and after increasing flow and temp)\") Printing example: [![Printing",
"I already successfully printed before -> Nothing helped! Then I",
"[![Printing example](https://i.stack.imgur.com/54sFZ.jpg \"Printing example\")](https://i.stack.imgur.com/54sFZ.jpg \"Printing example\") I don't know what",
"and temp)\")](https://i.stack.imgur.com/pjHYz.jpg \"Calibration cubes (before and after increasing flow and",
"flow and temp)](https://i.stack.imgur.com/pjHYz.jpg \"Calibration cubes (before and after increasing flow",
"was forced to also change the software (because my PC",
"started to be noisy and the prints came out definitely",
"after increasing flow and temp)](https://i.stack.imgur.com/pjHYz.jpg \"Calibration cubes (before and after",
"Then I was forced to also change the software (because",
"parameter whatsoever. This is what I tried so far: *",
"The software is always the same (Cura) and I never",
"a hot nozzle). Increasing the flow by 5 % and",
"From what I understood looking around, the problem could be",
"under extrusion is still appreciable. Calibration cubes: [![Calibration cubes (before",
"I'm having some problem with my Ender 3. I have",
"cubes (before and after increasing flow and temp)](https://i.stack.imgur.com/pjHYz.jpg \"Calibration cubes",
"have been printing for almost a year with good results.",
"though). * changing the E-steps * unclogging and replacing the",
"(before and after increasing flow and temp)\")](https://i.stack.imgur.com/pjHYz.jpg \"Calibration cubes (before",
"different projects, included those who I already successfully printed before",
"example\")](https://i.stack.imgur.com/54sFZ.jpg \"Printing example\") I don't know what else to try!!!",
"version nothing changed. Now the extruder calibration is okay (I",
"printed before -> Nothing helped! Then I was forced to",
"extrusion is still appreciable. Calibration cubes: [![Calibration cubes (before and",
"different filaments (always PLA though). * changing the E-steps *",
"E-steps * unclogging and replacing the nozzle (twice) * re-calibrating",
"new version nothing changed. Now the extruder calibration is okay",
"appreciable. Calibration cubes: [![Calibration cubes (before and after increasing flow",
"like a million times * printing different projects, included those",
"the prints keep coming out badly. The software is always",
"changing the E-steps * unclogging and replacing the nozzle (twice)",
"the E-steps * unclogging and replacing the nozzle (twice) *",
"I replaced the fan (both of them actually) but the",
"of them actually) but the prints keep coming out badly.",
"software (because my PC died...) But even with the new",
"definitely not good. From what I understood looking around, the",
"sudden, the fan started to be noisy and the prints",
"died...) But even with the new version nothing changed. Now",
"under extrusion. I replaced the fan (both of them actually)",
"Printing example: [![Printing example](https://i.stack.imgur.com/54sFZ.jpg \"Printing example\")](https://i.stack.imgur.com/54sFZ.jpg \"Printing example\") I don't",
"also change the software (because my PC died...) But even",
"-> Nothing helped! Then I was forced to also change",
"results (the calibration cube is more definite and more solid)",
"(because my PC died...) But even with the new version",
"Nothing helped! Then I was forced to also change the",
"3. I have been printing for almost a year with",
"after increasing flow and temp)\")](https://i.stack.imgur.com/pjHYz.jpg \"Calibration cubes (before and after",
"the new version nothing changed. Now the extruder calibration is",
"prints came out definitely not good. From what I understood",
"\"Printing example\")](https://i.stack.imgur.com/54sFZ.jpg \"Printing example\") I don't know what else to",
"PC died...) But even with the new version nothing changed.",
"I understood looking around, the problem could be under extrusion.",
"understood looking around, the problem could be under extrusion. I",
"and I never changed any parameter whatsoever. This is what",
"out definitely not good. From what I understood looking around,",
"the flow by 5 % and the temperature by 10",
"Then, all of a sudden, the fan started to be",
"what I understood looking around, the problem could be under",
"(four) different filaments (always PLA though). * changing the E-steps",
"cubes (before and after increasing flow and temp)\")](https://i.stack.imgur.com/pjHYz.jpg \"Calibration cubes",
"times * printing different projects, included those who I already",
"solid) even if under extrusion is still appreciable. Calibration cubes:",
"the software (because my PC died...) But even with the",
"I have been printing for almost a year with good",
"year with good results. Then, all of a sudden, the",
"filaments (always PLA though). * changing the E-steps * unclogging",
"(both of them actually) but the prints keep coming out",
"included those who I already successfully printed before -> Nothing",
"projects, included those who I already successfully printed before ->"
] |
[
"G1 E-1 F300 G28 X0 Y0 M84 M82 ;absolute extrusion",
"Y57.705 Z0.36 ;TYPE:SUPPORT-INTERFACE G1 F1500 E0 G1 F1350 X48.447 Y58.574",
"thicker dot of melted filament for better adhesion. Unfortunately, I",
";LAYER_COUNT:199 ;LAYER:-7 M107 G0 F7200 X49.177 Y57.705 Z0.36 ;TYPE:SUPPORT-INTERFACE G1",
"down 15mm ;Prime the extruder G92 E0 G1 F200 E3",
"for better adhesion. Unfortunately, I don't know how to setup",
"mode M104 S0 ;End of Gcode ;SETTING_3 {\"global_quality\": \"[general]\\\\nversion =",
";SETTING_3 {\"global_quality\": \"[general]\\\\nversion = 4\\\\nname = Normal #2\\\\ndefi ;SETTING_3 nition",
"ion = 20\\\\nposition = 0\\\\n\\\\n[values]\\\\ncool_fan_enabled = False\\\\nin ;SETTING_3 fill_pattern =",
"adhesive for 3D printers, but still not ideal Now, I've",
";MAXY:147.099 ;MAXZ:31.035 ;Generated with Cura_SteamEngine 5.2.1 M140 S45 M105 M190",
"is the extract of the GCODE: ``` ;FLAVOR:Marlin ;TIME:8750 ;Filament",
"tried different variation of offsets * Temperature of both bed",
";MAXZ:31.035 ;Generated with Cura_SteamEngine 5.2.1 M140 S45 M105 M190 S45",
"M109 S210 M82 ;absolute extrusion mode G28 ;Home G1 Z15.0",
"eventually know where I can find this parameter in Cura?",
"dot of melted filament for better adhesion. Unfortunately, I don't",
"M140 S0 ;Retract the filament G92 E1 G1 E-1 F300",
"E0.15151 G1 X46.778 Y61.31 E0.19618 ... ;TIME_ELAPSED:8750.646320 G1 F1500 E835.92386",
";MINY:52.901 ;MINZ:0.36 ;MAXX:154.6 ;MAXY:147.099 ;MAXZ:31.035 ;Generated with Cura_SteamEngine 5.2.1 M140",
"melted filament for better adhesion. Unfortunately, I don't know how",
"X48.447 Y58.574 E0.05124 G1 X47.809 Y59.466 E0.10075 G1 X47.23 Y60.43",
"the GCODE: ``` ;FLAVOR:Marlin ;TIME:8750 ;Filament used: 3.97836m ;Layer height:",
"G28 X0 Y0 M84 M82 ;absolute extrusion mode M104 S0",
"of offsets * Temperature of both bed and nozzle are",
"platform down 15mm ;Prime the extruder G92 E0 G1 F200",
"Cura? In addition, here it is the extract of the",
"M82 ;absolute extrusion mode G28 ;Home G1 Z15.0 F6000 ;Move",
"E0 G92 E0 G1 F1500 E-6.5 ;LAYER_COUNT:199 ;LAYER:-7 M107 G0",
"5.2.1 M140 S45 M105 M190 S45 M104 S210 M105 M109",
"the raft won't stick. I mean, it sticks, for iteration",
"I mean, it sticks, for iteration (layer) or two, and",
"variation of offsets * Temperature of both bed and nozzle",
"G28 ;Home G1 Z15.0 F6000 ;Move the platform down 15mm",
"it. But apparently, I have the problem that the raft",
"results with adhesive for 3D printers, but still not ideal",
"45.0\\\\n\\\\n\", \"extruder_quality\": [\"[gen ;SETTING_3 eral]\\\\nversion = 4\\\\nname = Normal #2\\\\ndefinition",
"* Bed is leveled properly, including Z, tried different variation",
"it sticks, for iteration (layer) or two, and after that",
"I don't know how to setup this parameter in slicing",
"know where I can find this parameter in Cura? In",
"that the raft won't stick. I mean, it sticks, for",
"for iteration (layer) or two, and after that it just",
"4\\\\nname = Normal #2\\\\ndefinition = custom\\\\n\\\\n[me ;SETTING_3 tadata]\\\\ntype = quality_changes\\\\nquality_type",
"4\\\\nname = Normal #2\\\\ndefi ;SETTING_3 nition = custom\\\\n\\\\n[metadata]\\\\ntype = quality_changes\\\\nquality_ty",
"printers, but still not ideal Now, I've came up to",
"is leveled properly, including Z, tried different variation of offsets",
";SETTING_3 \\\\nmaterial_bed_temperature = 45.0\\\\n\\\\n\", \"extruder_quality\": [\"[gen ;SETTING_3 eral]\\\\nversion = 4\\\\nname",
"= 4\\\\nname = Normal #2\\\\ndefi ;SETTING_3 nition = custom\\\\n\\\\n[metadata]\\\\ntype =",
"Y59.466 E0.10075 G1 X47.23 Y60.43 E0.15151 G1 X46.778 Y61.31 E0.19618",
"= 20\\\\nposition = 0\\\\n\\\\n[values]\\\\ncool_fan_enabled = False\\\\nin ;SETTING_3 fill_pattern = grid\\\\ninfill_sparse_density",
"G1 X47.23 Y60.43 E0.15151 G1 X46.778 Y61.31 E0.19618 ... ;TIME_ELAPSED:8750.646320",
"with it. But apparently, I have the problem that the",
"it is PLA filament) * Received slightly better results with",
"with Cura_SteamEngine 5.2.1 M140 S45 M105 M190 S45 M104 S210",
"S210 M105 M109 S210 M82 ;absolute extrusion mode G28 ;Home",
"20\\\\nposition = 0\\\\n\\\\n[values]\\\\ncool_fan_enabled = False\\\\nin ;SETTING_3 fill_pattern = grid\\\\ninfill_sparse_density =",
"Now, I've came up to the idea: I would like",
"printer, and I've started playing with it. But apparently, I",
"stick. I mean, it sticks, for iteration (layer) or two,",
"[\"[gen ;SETTING_3 eral]\\\\nversion = 4\\\\nname = Normal #2\\\\ndefinition = custom\\\\n\\\\n[me",
"are okay (70 and 210 °C, it is PLA filament)",
"E0 G1 F200 E3 G92 E0 G92 E0 G92 E0",
"different variation of offsets * Temperature of both bed and",
"210 °C, it is PLA filament) * Received slightly better",
"F300 G28 X0 Y0 M84 M82 ;absolute extrusion mode M104",
"two, and after that it just disconnects. This is what",
";Generated with Cura_SteamEngine 5.2.1 M140 S45 M105 M190 S45 M104",
"= 4\\\\nname = Normal #2\\\\ndefinition = custom\\\\n\\\\n[me ;SETTING_3 tadata]\\\\ntype =",
"parameter in Cura? In addition, here it is the extract",
"F1500 E835.92386 M140 S0 M104 S0 M140 S0 ;Retract the",
"Y60.43 E0.15151 G1 X46.778 Y61.31 E0.19618 ... ;TIME_ELAPSED:8750.646320 G1 F1500",
"G1 Z15.0 F6000 ;Move the platform down 15mm ;Prime the",
"This is what I've checked until now: * Bed is",
";SETTING_3 pe = fast\\\\nsetting_version = 20\\\\n\\\\n[values]\\\\nadhesion_type = raft ;SETTING_3 \\\\nmaterial_bed_temperature",
"I've started playing with it. But apparently, I have the",
"M105 M190 S45 M104 S210 M105 M109 S210 M82 ;absolute",
"PLA filament) * Received slightly better results with adhesive for",
"parameter in slicing software (Cura). Does anyone eventually know where",
"M190 S45 M104 S210 M105 M109 S210 M82 ;absolute extrusion",
"custom\\\\n\\\\n[metadata]\\\\ntype = quality_changes\\\\nquality_ty ;SETTING_3 pe = fast\\\\nsetting_version = 20\\\\n\\\\n[values]\\\\nadhesion_type =",
"and after that it just disconnects. This is what I've",
"G1 F1500 E835.92386 M140 S0 M104 S0 M140 S0 ;Retract",
"80\\\\nmaterial_print_tem ;SETTING_3 perature = 210.0\\\\nretraction_hop_enabled = True\\\\nspeed_print = 60.0 ;SETTING_3",
"leveled properly, including Z, tried different variation of offsets *",
"Normal #2\\\\ndefinition = custom\\\\n\\\\n[me ;SETTING_3 tadata]\\\\ntype = quality_changes\\\\nquality_type = fast\\\\nsetting_vers",
"Received slightly better results with adhesive for 3D printers, but",
";SETTING_3 tadata]\\\\ntype = quality_changes\\\\nquality_type = fast\\\\nsetting_vers ;SETTING_3 ion = 20\\\\nposition",
"how to setup this parameter in slicing software (Cura). Does",
"= fast\\\\nsetting_vers ;SETTING_3 ion = 20\\\\nposition = 0\\\\n\\\\n[values]\\\\ncool_fan_enabled = False\\\\nin",
"F7200 X49.177 Y57.705 Z0.36 ;TYPE:SUPPORT-INTERFACE G1 F1500 E0 G1 F1350",
"X46.778 Y61.31 E0.19618 ... ;TIME_ELAPSED:8750.646320 G1 F1500 E835.92386 M140 S0",
"in one layer (iteration) with thicker dot of melted filament",
"have the problem that the raft won't stick. I mean,",
"E-1 F300 G28 X0 Y0 M84 M82 ;absolute extrusion mode",
"Gcode ;SETTING_3 {\"global_quality\": \"[general]\\\\nversion = 4\\\\nname = Normal #2\\\\ndefi ;SETTING_3",
"including Z, tried different variation of offsets * Temperature of",
"S0 ;End of Gcode ;SETTING_3 {\"global_quality\": \"[general]\\\\nversion = 4\\\\nname =",
"E0 G1 F1350 X48.447 Y58.574 E0.05124 G1 X47.809 Y59.466 E0.10075",
"is what I've checked until now: * Bed is leveled",
";Home G1 Z15.0 F6000 ;Move the platform down 15mm ;Prime",
"software (Cura). Does anyone eventually know where I can find",
"to the idea: I would like to try to interconnect",
"= 45.0\\\\n\\\\n\", \"extruder_quality\": [\"[gen ;SETTING_3 eral]\\\\nversion = 4\\\\nname = Normal",
"sticks, for iteration (layer) or two, and after that it",
"fast\\\\nsetting_vers ;SETTING_3 ion = 20\\\\nposition = 0\\\\n\\\\n[values]\\\\ncool_fan_enabled = False\\\\nin ;SETTING_3",
";MAXX:154.6 ;MAXY:147.099 ;MAXZ:31.035 ;Generated with Cura_SteamEngine 5.2.1 M140 S45 M105",
"raft ;SETTING_3 \\\\nmaterial_bed_temperature = 45.0\\\\n\\\\n\", \"extruder_quality\": [\"[gen ;SETTING_3 eral]\\\\nversion =",
"used: 3.97836m ;Layer height: 0.15 ;MINX:45.401 ;MINY:52.901 ;MINZ:0.36 ;MAXX:154.6 ;MAXY:147.099",
"or two, and after that it just disconnects. This is",
"Z15.0 F6000 ;Move the platform down 15mm ;Prime the extruder",
"started playing with it. But apparently, I have the problem",
"I would like to try to interconnect each line in",
"to interconnect each line in one layer (iteration) with thicker",
"iteration (layer) or two, and after that it just disconnects.",
"Bed is leveled properly, including Z, tried different variation of",
"G92 E0 G1 F200 E3 G92 E0 G92 E0 G92",
";SETTING_3 perature = 210.0\\\\nretraction_hop_enabled = True\\\\nspeed_print = 60.0 ;SETTING_3 \\\\n\\\\n\"]}",
"layer (iteration) with thicker dot of melted filament for better",
"to setup this parameter in slicing software (Cura). Does anyone",
"would like to try to interconnect each line in one",
"Y0 M84 M82 ;absolute extrusion mode M104 S0 ;End of",
"\"[general]\\\\nversion = 4\\\\nname = Normal #2\\\\ndefi ;SETTING_3 nition = custom\\\\n\\\\n[metadata]\\\\ntype",
";Prime the extruder G92 E0 G1 F200 E3 G92 E0",
"X47.23 Y60.43 E0.15151 G1 X46.778 Y61.31 E0.19618 ... ;TIME_ELAPSED:8750.646320 G1",
"G1 F1350 X48.447 Y58.574 E0.05124 G1 X47.809 Y59.466 E0.10075 G1",
"= 20\\\\n\\\\n[values]\\\\nadhesion_type = raft ;SETTING_3 \\\\nmaterial_bed_temperature = 45.0\\\\n\\\\n\", \"extruder_quality\": [\"[gen",
";Layer height: 0.15 ;MINX:45.401 ;MINY:52.901 ;MINZ:0.36 ;MAXX:154.6 ;MAXY:147.099 ;MAXZ:31.035 ;Generated",
";TIME:8750 ;Filament used: 3.97836m ;Layer height: 0.15 ;MINX:45.401 ;MINY:52.901 ;MINZ:0.36",
"F6000 ;Move the platform down 15mm ;Prime the extruder G92",
"E3 G92 E0 G92 E0 G92 E0 G1 F1500 E-6.5",
"of Gcode ;SETTING_3 {\"global_quality\": \"[general]\\\\nversion = 4\\\\nname = Normal #2\\\\ndefi",
"where I can find this parameter in Cura? In addition,",
";TYPE:SUPPORT-INTERFACE G1 F1500 E0 G1 F1350 X48.447 Y58.574 E0.05124 G1",
"just bought my first 3D printer, and I've started playing",
"in slicing software (Cura). Does anyone eventually know where I",
"and 210 °C, it is PLA filament) * Received slightly",
"M84 M82 ;absolute extrusion mode M104 S0 ;End of Gcode",
"E0.05124 G1 X47.809 Y59.466 E0.10075 G1 X47.23 Y60.43 E0.15151 G1",
"of melted filament for better adhesion. Unfortunately, I don't know",
"0\\\\n\\\\n[values]\\\\ncool_fan_enabled = False\\\\nin ;SETTING_3 fill_pattern = grid\\\\ninfill_sparse_density = 80\\\\nmaterial_print_tem ;SETTING_3",
"I have the problem that the raft won't stick. I",
"until now: * Bed is leveled properly, including Z, tried",
"Z0.36 ;TYPE:SUPPORT-INTERFACE G1 F1500 E0 G1 F1350 X48.447 Y58.574 E0.05124",
"can find this parameter in Cura? In addition, here it",
"I've just bought my first 3D printer, and I've started",
"tadata]\\\\ntype = quality_changes\\\\nquality_type = fast\\\\nsetting_vers ;SETTING_3 ion = 20\\\\nposition =",
"slightly better results with adhesive for 3D printers, but still",
"first 3D printer, and I've started playing with it. But",
"E0.19618 ... ;TIME_ELAPSED:8750.646320 G1 F1500 E835.92386 M140 S0 M104 S0",
"G92 E0 G92 E0 G92 E0 G1 F1500 E-6.5 ;LAYER_COUNT:199",
"still not ideal Now, I've came up to the idea:",
"height: 0.15 ;MINX:45.401 ;MINY:52.901 ;MINZ:0.36 ;MAXX:154.6 ;MAXY:147.099 ;MAXZ:31.035 ;Generated with",
"extruder G92 E0 G1 F200 E3 G92 E0 G92 E0",
"offsets * Temperature of both bed and nozzle are okay",
"is PLA filament) * Received slightly better results with adhesive",
"G1 F1500 E0 G1 F1350 X48.447 Y58.574 E0.05124 G1 X47.809",
"the extract of the GCODE: ``` ;FLAVOR:Marlin ;TIME:8750 ;Filament used:",
"M82 ;absolute extrusion mode M104 S0 ;End of Gcode ;SETTING_3",
"``` ;FLAVOR:Marlin ;TIME:8750 ;Filament used: 3.97836m ;Layer height: 0.15 ;MINX:45.401",
"but still not ideal Now, I've came up to the",
"I've came up to the idea: I would like to",
"just disconnects. This is what I've checked until now: *",
"= 80\\\\nmaterial_print_tem ;SETTING_3 perature = 210.0\\\\nretraction_hop_enabled = True\\\\nspeed_print = 60.0",
"But apparently, I have the problem that the raft won't",
"G92 E0 G1 F1500 E-6.5 ;LAYER_COUNT:199 ;LAYER:-7 M107 G0 F7200",
"M104 S0 ;End of Gcode ;SETTING_3 {\"global_quality\": \"[general]\\\\nversion = 4\\\\nname",
"#2\\\\ndefinition = custom\\\\n\\\\n[me ;SETTING_3 tadata]\\\\ntype = quality_changes\\\\nquality_type = fast\\\\nsetting_vers ;SETTING_3",
"apparently, I have the problem that the raft won't stick.",
";SETTING_3 eral]\\\\nversion = 4\\\\nname = Normal #2\\\\ndefinition = custom\\\\n\\\\n[me ;SETTING_3",
";End of Gcode ;SETTING_3 {\"global_quality\": \"[general]\\\\nversion = 4\\\\nname = Normal",
"E0 G1 F1500 E-6.5 ;LAYER_COUNT:199 ;LAYER:-7 M107 G0 F7200 X49.177",
"quality_changes\\\\nquality_type = fast\\\\nsetting_vers ;SETTING_3 ion = 20\\\\nposition = 0\\\\n\\\\n[values]\\\\ncool_fan_enabled =",
"ideal Now, I've came up to the idea: I would",
"know how to setup this parameter in slicing software (Cura).",
"here it is the extract of the GCODE: ``` ;FLAVOR:Marlin",
"adhesion. Unfortunately, I don't know how to setup this parameter",
"\\\\nmaterial_bed_temperature = 45.0\\\\n\\\\n\", \"extruder_quality\": [\"[gen ;SETTING_3 eral]\\\\nversion = 4\\\\nname =",
"3.97836m ;Layer height: 0.15 ;MINX:45.401 ;MINY:52.901 ;MINZ:0.36 ;MAXX:154.6 ;MAXY:147.099 ;MAXZ:31.035",
"checked until now: * Bed is leveled properly, including Z,",
"G1 F1500 E-6.5 ;LAYER_COUNT:199 ;LAYER:-7 M107 G0 F7200 X49.177 Y57.705",
"(layer) or two, and after that it just disconnects. This",
"it is the extract of the GCODE: ``` ;FLAVOR:Marlin ;TIME:8750",
"not ideal Now, I've came up to the idea: I",
"line in one layer (iteration) with thicker dot of melted",
"my first 3D printer, and I've started playing with it.",
"= 0\\\\n\\\\n[values]\\\\ncool_fan_enabled = False\\\\nin ;SETTING_3 fill_pattern = grid\\\\ninfill_sparse_density = 80\\\\nmaterial_print_tem",
";FLAVOR:Marlin ;TIME:8750 ;Filament used: 3.97836m ;Layer height: 0.15 ;MINX:45.401 ;MINY:52.901",
"bought my first 3D printer, and I've started playing with",
"GCODE: ``` ;FLAVOR:Marlin ;TIME:8750 ;Filament used: 3.97836m ;Layer height: 0.15",
"Y61.31 E0.19618 ... ;TIME_ELAPSED:8750.646320 G1 F1500 E835.92386 M140 S0 M104",
"try to interconnect each line in one layer (iteration) with",
"3D printer, and I've started playing with it. But apparently,",
";absolute extrusion mode M104 S0 ;End of Gcode ;SETTING_3 {\"global_quality\":",
"like to try to interconnect each line in one layer",
"this parameter in Cura? In addition, here it is the",
"= quality_changes\\\\nquality_ty ;SETTING_3 pe = fast\\\\nsetting_version = 20\\\\n\\\\n[values]\\\\nadhesion_type = raft",
"don't know how to setup this parameter in slicing software",
"nition = custom\\\\n\\\\n[metadata]\\\\ntype = quality_changes\\\\nquality_ty ;SETTING_3 pe = fast\\\\nsetting_version =",
"to try to interconnect each line in one layer (iteration)",
"I've checked until now: * Bed is leveled properly, including",
"extract of the GCODE: ``` ;FLAVOR:Marlin ;TIME:8750 ;Filament used: 3.97836m",
"E835.92386 M140 S0 M104 S0 M140 S0 ;Retract the filament",
"okay (70 and 210 °C, it is PLA filament) *",
";SETTING_3 nition = custom\\\\n\\\\n[metadata]\\\\ntype = quality_changes\\\\nquality_ty ;SETTING_3 pe = fast\\\\nsetting_version",
"idea: I would like to try to interconnect each line",
"extrusion mode G28 ;Home G1 Z15.0 F6000 ;Move the platform",
"find this parameter in Cura? In addition, here it is",
"fast\\\\nsetting_version = 20\\\\n\\\\n[values]\\\\nadhesion_type = raft ;SETTING_3 \\\\nmaterial_bed_temperature = 45.0\\\\n\\\\n\", \"extruder_quality\":",
"Z, tried different variation of offsets * Temperature of both",
"= raft ;SETTING_3 \\\\nmaterial_bed_temperature = 45.0\\\\n\\\\n\", \"extruder_quality\": [\"[gen ;SETTING_3 eral]\\\\nversion",
"the idea: I would like to try to interconnect each",
"(iteration) with thicker dot of melted filament for better adhesion.",
"In addition, here it is the extract of the GCODE:",
";absolute extrusion mode G28 ;Home G1 Z15.0 F6000 ;Move the",
";TIME_ELAPSED:8750.646320 G1 F1500 E835.92386 M140 S0 M104 S0 M140 S0",
"S45 M104 S210 M105 M109 S210 M82 ;absolute extrusion mode",
"that it just disconnects. This is what I've checked until",
"one layer (iteration) with thicker dot of melted filament for",
"... ;TIME_ELAPSED:8750.646320 G1 F1500 E835.92386 M140 S0 M104 S0 M140",
"False\\\\nin ;SETTING_3 fill_pattern = grid\\\\ninfill_sparse_density = 80\\\\nmaterial_print_tem ;SETTING_3 perature =",
"* Received slightly better results with adhesive for 3D printers,",
"for 3D printers, but still not ideal Now, I've came",
"filament G92 E1 G1 E-1 F300 G28 X0 Y0 M84",
"and nozzle are okay (70 and 210 °C, it is",
"both bed and nozzle are okay (70 and 210 °C,",
";LAYER:-7 M107 G0 F7200 X49.177 Y57.705 Z0.36 ;TYPE:SUPPORT-INTERFACE G1 F1500",
"= Normal #2\\\\ndefi ;SETTING_3 nition = custom\\\\n\\\\n[metadata]\\\\ntype = quality_changes\\\\nquality_ty ;SETTING_3",
"each line in one layer (iteration) with thicker dot of",
"Does anyone eventually know where I can find this parameter",
"Normal #2\\\\ndefi ;SETTING_3 nition = custom\\\\n\\\\n[metadata]\\\\ntype = quality_changes\\\\nquality_ty ;SETTING_3 pe",
"custom\\\\n\\\\n[me ;SETTING_3 tadata]\\\\ntype = quality_changes\\\\nquality_type = fast\\\\nsetting_vers ;SETTING_3 ion =",
"S210 M82 ;absolute extrusion mode G28 ;Home G1 Z15.0 F6000",
"G1 F200 E3 G92 E0 G92 E0 G92 E0 G1",
"M104 S0 M140 S0 ;Retract the filament G92 E1 G1",
"* Temperature of both bed and nozzle are okay (70",
"S45 M105 M190 S45 M104 S210 M105 M109 S210 M82",
"G92 E0 G92 E0 G1 F1500 E-6.5 ;LAYER_COUNT:199 ;LAYER:-7 M107",
"F1350 X48.447 Y58.574 E0.05124 G1 X47.809 Y59.466 E0.10075 G1 X47.23",
"X0 Y0 M84 M82 ;absolute extrusion mode M104 S0 ;End",
"and I've started playing with it. But apparently, I have",
"M105 M109 S210 M82 ;absolute extrusion mode G28 ;Home G1",
"F200 E3 G92 E0 G92 E0 G92 E0 G1 F1500",
"better adhesion. Unfortunately, I don't know how to setup this",
"= custom\\\\n\\\\n[me ;SETTING_3 tadata]\\\\ntype = quality_changes\\\\nquality_type = fast\\\\nsetting_vers ;SETTING_3 ion",
"= quality_changes\\\\nquality_type = fast\\\\nsetting_vers ;SETTING_3 ion = 20\\\\nposition = 0\\\\n\\\\n[values]\\\\ncool_fan_enabled",
"M104 S210 M105 M109 S210 M82 ;absolute extrusion mode G28",
"(Cura). Does anyone eventually know where I can find this",
"raft won't stick. I mean, it sticks, for iteration (layer)",
"eral]\\\\nversion = 4\\\\nname = Normal #2\\\\ndefinition = custom\\\\n\\\\n[me ;SETTING_3 tadata]\\\\ntype",
"came up to the idea: I would like to try",
";Filament used: 3.97836m ;Layer height: 0.15 ;MINX:45.401 ;MINY:52.901 ;MINZ:0.36 ;MAXX:154.6",
"\"extruder_quality\": [\"[gen ;SETTING_3 eral]\\\\nversion = 4\\\\nname = Normal #2\\\\ndefinition =",
"Cura_SteamEngine 5.2.1 M140 S45 M105 M190 S45 M104 S210 M105",
"15mm ;Prime the extruder G92 E0 G1 F200 E3 G92",
"of the GCODE: ``` ;FLAVOR:Marlin ;TIME:8750 ;Filament used: 3.97836m ;Layer",
";SETTING_3 ion = 20\\\\nposition = 0\\\\n\\\\n[values]\\\\ncool_fan_enabled = False\\\\nin ;SETTING_3 fill_pattern",
"F1500 E0 G1 F1350 X48.447 Y58.574 E0.05124 G1 X47.809 Y59.466",
"S0 M140 S0 ;Retract the filament G92 E1 G1 E-1",
";MINX:45.401 ;MINY:52.901 ;MINZ:0.36 ;MAXX:154.6 ;MAXY:147.099 ;MAXZ:31.035 ;Generated with Cura_SteamEngine 5.2.1",
"G1 X46.778 Y61.31 E0.19618 ... ;TIME_ELAPSED:8750.646320 G1 F1500 E835.92386 M140",
";Move the platform down 15mm ;Prime the extruder G92 E0",
"Y58.574 E0.05124 G1 X47.809 Y59.466 E0.10075 G1 X47.23 Y60.43 E0.15151",
"G0 F7200 X49.177 Y57.705 Z0.36 ;TYPE:SUPPORT-INTERFACE G1 F1500 E0 G1",
"of both bed and nozzle are okay (70 and 210",
"S0 ;Retract the filament G92 E1 G1 E-1 F300 G28",
"now: * Bed is leveled properly, including Z, tried different",
"E0 G92 E0 G92 E0 G1 F1500 E-6.5 ;LAYER_COUNT:199 ;LAYER:-7",
"this parameter in slicing software (Cura). Does anyone eventually know",
"what I've checked until now: * Bed is leveled properly,",
"fill_pattern = grid\\\\ninfill_sparse_density = 80\\\\nmaterial_print_tem ;SETTING_3 perature = 210.0\\\\nretraction_hop_enabled =",
"Unfortunately, I don't know how to setup this parameter in",
"G92 E1 G1 E-1 F300 G28 X0 Y0 M84 M82",
";MINZ:0.36 ;MAXX:154.6 ;MAXY:147.099 ;MAXZ:31.035 ;Generated with Cura_SteamEngine 5.2.1 M140 S45",
"20\\\\n\\\\n[values]\\\\nadhesion_type = raft ;SETTING_3 \\\\nmaterial_bed_temperature = 45.0\\\\n\\\\n\", \"extruder_quality\": [\"[gen ;SETTING_3",
"G1 X47.809 Y59.466 E0.10075 G1 X47.23 Y60.43 E0.15151 G1 X46.778",
"anyone eventually know where I can find this parameter in",
"it just disconnects. This is what I've checked until now:",
"I can find this parameter in Cura? In addition, here",
"setup this parameter in slicing software (Cura). Does anyone eventually",
"pe = fast\\\\nsetting_version = 20\\\\n\\\\n[values]\\\\nadhesion_type = raft ;SETTING_3 \\\\nmaterial_bed_temperature =",
"better results with adhesive for 3D printers, but still not",
"Temperature of both bed and nozzle are okay (70 and",
"3D printers, but still not ideal Now, I've came up",
"bed and nozzle are okay (70 and 210 °C, it",
"M140 S0 M104 S0 M140 S0 ;Retract the filament G92",
"= grid\\\\ninfill_sparse_density = 80\\\\nmaterial_print_tem ;SETTING_3 perature = 210.0\\\\nretraction_hop_enabled = True\\\\nspeed_print",
"nozzle are okay (70 and 210 °C, it is PLA",
"up to the idea: I would like to try to",
"S0 M104 S0 M140 S0 ;Retract the filament G92 E1",
"= custom\\\\n\\\\n[metadata]\\\\ntype = quality_changes\\\\nquality_ty ;SETTING_3 pe = fast\\\\nsetting_version = 20\\\\n\\\\n[values]\\\\nadhesion_type",
"problem that the raft won't stick. I mean, it sticks,",
"disconnects. This is what I've checked until now: * Bed",
"won't stick. I mean, it sticks, for iteration (layer) or",
"= False\\\\nin ;SETTING_3 fill_pattern = grid\\\\ninfill_sparse_density = 80\\\\nmaterial_print_tem ;SETTING_3 perature",
"the extruder G92 E0 G1 F200 E3 G92 E0 G92",
"in Cura? In addition, here it is the extract of",
"with thicker dot of melted filament for better adhesion. Unfortunately,",
"X49.177 Y57.705 Z0.36 ;TYPE:SUPPORT-INTERFACE G1 F1500 E0 G1 F1350 X48.447",
"M107 G0 F7200 X49.177 Y57.705 Z0.36 ;TYPE:SUPPORT-INTERFACE G1 F1500 E0",
"E-6.5 ;LAYER_COUNT:199 ;LAYER:-7 M107 G0 F7200 X49.177 Y57.705 Z0.36 ;TYPE:SUPPORT-INTERFACE",
"the problem that the raft won't stick. I mean, it",
"= Normal #2\\\\ndefinition = custom\\\\n\\\\n[me ;SETTING_3 tadata]\\\\ntype = quality_changes\\\\nquality_type =",
"properly, including Z, tried different variation of offsets * Temperature",
"(70 and 210 °C, it is PLA filament) * Received",
"extrusion mode M104 S0 ;End of Gcode ;SETTING_3 {\"global_quality\": \"[general]\\\\nversion",
"{\"global_quality\": \"[general]\\\\nversion = 4\\\\nname = Normal #2\\\\ndefi ;SETTING_3 nition =",
"°C, it is PLA filament) * Received slightly better results",
"M140 S45 M105 M190 S45 M104 S210 M105 M109 S210",
"after that it just disconnects. This is what I've checked",
"0.15 ;MINX:45.401 ;MINY:52.901 ;MINZ:0.36 ;MAXX:154.6 ;MAXY:147.099 ;MAXZ:31.035 ;Generated with Cura_SteamEngine",
"E1 G1 E-1 F300 G28 X0 Y0 M84 M82 ;absolute",
"filament) * Received slightly better results with adhesive for 3D",
"interconnect each line in one layer (iteration) with thicker dot",
"X47.809 Y59.466 E0.10075 G1 X47.23 Y60.43 E0.15151 G1 X46.778 Y61.31",
"addition, here it is the extract of the GCODE: ```",
"with adhesive for 3D printers, but still not ideal Now,",
"the platform down 15mm ;Prime the extruder G92 E0 G1",
"#2\\\\ndefi ;SETTING_3 nition = custom\\\\n\\\\n[metadata]\\\\ntype = quality_changes\\\\nquality_ty ;SETTING_3 pe =",
"mode G28 ;Home G1 Z15.0 F6000 ;Move the platform down",
"E0.10075 G1 X47.23 Y60.43 E0.15151 G1 X46.778 Y61.31 E0.19618 ...",
"grid\\\\ninfill_sparse_density = 80\\\\nmaterial_print_tem ;SETTING_3 perature = 210.0\\\\nretraction_hop_enabled = True\\\\nspeed_print =",
"perature = 210.0\\\\nretraction_hop_enabled = True\\\\nspeed_print = 60.0 ;SETTING_3 \\\\n\\\\n\"]} ```",
"the filament G92 E1 G1 E-1 F300 G28 X0 Y0",
"filament for better adhesion. Unfortunately, I don't know how to",
"quality_changes\\\\nquality_ty ;SETTING_3 pe = fast\\\\nsetting_version = 20\\\\n\\\\n[values]\\\\nadhesion_type = raft ;SETTING_3",
"F1500 E-6.5 ;LAYER_COUNT:199 ;LAYER:-7 M107 G0 F7200 X49.177 Y57.705 Z0.36",
"playing with it. But apparently, I have the problem that",
";Retract the filament G92 E1 G1 E-1 F300 G28 X0",
"mean, it sticks, for iteration (layer) or two, and after",
"slicing software (Cura). Does anyone eventually know where I can",
";SETTING_3 fill_pattern = grid\\\\ninfill_sparse_density = 80\\\\nmaterial_print_tem ;SETTING_3 perature = 210.0\\\\nretraction_hop_enabled",
"= fast\\\\nsetting_version = 20\\\\n\\\\n[values]\\\\nadhesion_type = raft ;SETTING_3 \\\\nmaterial_bed_temperature = 45.0\\\\n\\\\n\","
] |
[
"will print the top and bottom separately and glue them",
"print the top and bottom separately and glue them together.",
"items with large overhangs which cannot have (or would be",
"wide. I was about to print this when I suddenly",
"structures. Consider my following design: [](https://i.stack.imgur.com/Rfmyd.png) This",
"was about to print this when I suddenly realized printing",
"0.100\" wide. I was about to print this when I",
"printing, I'm wondering what is best practice for items with",
"the body (with corresponding holes in the upper portion of",
"do some extensive cleanup to make sure it's smooth. What",
"a problem. So I started messing around with painting on",
"them together. My question is whether this is my only",
"option or if I'm missing something in the design process",
"doing was splitting the body at the start of the",
"make sure it's smooth. What I ended up doing was",
"something in the design process which might work better? This",
"designing for 3d FDM printing, I'm wondering what is best",
"have (or would be fairly impractical) support structures. Consider my",
"Consider my following design: [](https://i.stack.imgur.com/Rfmyd.png) This item",
"design process which might work better? This design is in",
"narrow slot running through the middle of it. The slot",
"but since something slides in this slot, I would have",
"the body. e.g. [](https://i.stack.imgur.com/ypGmc.png) I will print",
"together. My question is whether this is my only option",
"is in Fusion360, in case that matters when discussing some",
"best practice for items with large overhangs which cannot have",
"this when I suddenly realized printing it would be a",
"for items with large overhangs which cannot have (or would",
"placing some alignment pins in the body (with corresponding holes",
"about to print this when I suddenly realized printing it",
"overhangs which cannot have (or would be fairly impractical) support",
"Fusion360, in case that matters when discussing some specific tools",
"some specific tools that are available which I'm unaware of.",
"is best practice for items with large overhangs which cannot",
"The slot is 0.100\" wide. I was about to print",
"at the start of the overhang, and placing some alignment",
"supports, but since something slides in this slot, I would",
"body at the start of the overhang, and placing some",
"to do some extensive cleanup to make sure it's smooth.",
"What I ended up doing was splitting the body at",
"impractical) support structures. Consider my following design: [](https://i.stack.imgur.com/ypGmc.png) I will print the",
"since something slides in this slot, I would have to",
"start of the overhang, and placing some alignment pins in",
"7\" long, and you'll notice the narrow slot running through",
"ended up doing was splitting the body at the start",
"discussing some specific tools that are available which I'm unaware",
"holes in the upper portion of the body. e.g. [](https://i.stack.imgur.com/ypGmc.png) I will print the top",
"the start of the overhang, and placing some alignment pins",
"and placing some alignment pins in the body (with corresponding",
"you'll notice the narrow slot running through the middle of",
"corresponding holes in the upper portion of the body. e.g.",
"glue them together. My question is whether this is my",
"is my only option or if I'm missing something in",
"is about 7\" long, and you'll notice the narrow slot",
"slot running through the middle of it. The slot is",
"of it. The slot is 0.100\" wide. I was about",
"top and bottom separately and glue them together. My question",
"suddenly realized printing it would be a problem. So I",
"problem. So I started messing around with painting on supports,",
"smooth. What I ended up doing was splitting the body",
"design: [](https://i.stack.imgur.com/Rfmyd.png) This item is about 7\"",
"extensive cleanup to make sure it's smooth. What I ended",
"[](https://i.stack.imgur.com/ypGmc.png) I will print the top and",
"description here](https://i.stack.imgur.com/ypGmc.png)](https://i.stack.imgur.com/ypGmc.png) I will print the top and bottom separately",
"only option or if I'm missing something in the design",
"cannot have (or would be fairly impractical) support structures. Consider",
"be a problem. So I started messing around with painting",
"when discussing some specific tools that are available which I'm",
"middle of it. The slot is 0.100\" wide. I was",
"this slot, I would have to do some extensive cleanup",
"in the upper portion of the body. e.g. [](https://i.stack.imgur.com/Rfmyd.png) This item is about 7\" long, and you'll notice",
"the upper portion of the body. e.g. [](https://i.stack.imgur.com/ypGmc.png) I will print the top and bottom separately and",
"body (with corresponding holes in the upper portion of the",
"or if I'm missing something in the design process which",
"fairly impractical) support structures. Consider my following design: [](https://i.stack.imgur.com/Rfmyd.png) This item is about 7\" long, and",
"slot, I would have to do some extensive cleanup to",
"it. The slot is 0.100\" wide. I was about to",
"I'm wondering what is best practice for items with large",
"started messing around with painting on supports, but since something",
"overhang, and placing some alignment pins in the body (with",
"was splitting the body at the start of the overhang,",
"messing around with painting on supports, but since something slides",
"whether this is my only option or if I'm missing",
"this is my only option or if I'm missing something",
"and you'll notice the narrow slot running through the middle",
"would be fairly impractical) support structures. Consider my following design:",
"printing it would be a problem. So I started messing",
"what is best practice for items with large overhangs which",
"alignment pins in the body (with corresponding holes in the",
"upper portion of the body. e.g. [](https://i.stack.imgur.com/ypGmc.png)",
"in the design process which might work better? This design",
"and glue them together. My question is whether this is",
"FDM printing, I'm wondering what is best practice for items",
"with large overhangs which cannot have (or would be fairly",
"would be a problem. So I started messing around with",
"have to do some extensive cleanup to make sure it's",
"of the body. e.g. [](https://i.stack.imgur.com/ypGmc.png) I will",
"I will print the top and bottom separately and glue",
"My question is whether this is my only option or",
"is 0.100\" wide. I was about to print this when",
"some extensive cleanup to make sure it's smooth. What I",
"for 3d FDM printing, I'm wondering what is best practice",
"in case that matters when discussing some specific tools that",
"item is about 7\" long, and you'll notice the narrow",
"cleanup to make sure it's smooth. What I ended up",
"bottom separately and glue them together. My question is whether",
"missing something in the design process which might work better?",
"3d FDM printing, I'm wondering what is best practice for",
"of the overhang, and placing some alignment pins in the",
"and bottom separately and glue them together. My question is",
"I ended up doing was splitting the body at the",
"following design: [](https://i.stack.imgur.com/Rfmyd.png) This item is about",
"separately and glue them together. My question is whether this",
"to print this when I suddenly realized printing it would",
"I would have to do some extensive cleanup to make",
"portion of the body. e.g. [](https://i.stack.imgur.com/ypGmc.png) I",
"the narrow slot running through the middle of it. The",
"slot is 0.100\" wide. I was about to print this",
"the middle of it. The slot is 0.100\" wide. I",
"painting on supports, but since something slides in this slot,",
"that matters when discussing some specific tools that are available",
"would have to do some extensive cleanup to make sure",
"description here](https://i.stack.imgur.com/Rfmyd.png)](https://i.stack.imgur.com/Rfmyd.png) This item is about 7\" long, and you'll",
"wondering what is best practice for items with large overhangs",
"my following design: [](https://i.stack.imgur.com/Rfmyd.png) This item is",
"support structures. Consider my following design: [](https://i.stack.imgur.com/Rfmyd.png)",
"notice the narrow slot running through the middle of it.",
"through the middle of it. The slot is 0.100\" wide.",
"print this when I suddenly realized printing it would be",
"which might work better? This design is in Fusion360, in",
"on supports, but since something slides in this slot, I",
"my only option or if I'm missing something in the",
"the design process which might work better? This design is",
"in the body (with corresponding holes in the upper portion",
"some alignment pins in the body (with corresponding holes in",
"in this slot, I would have to do some extensive",
"when I suddenly realized printing it would be a problem.",
"I'm missing something in the design process which might work",
"design is in Fusion360, in case that matters when discussing",
"practice for items with large overhangs which cannot have (or",
"[](https://i.stack.imgur.com/Rfmyd.png) This item is about 7\" long,",
"image description here](https://i.stack.imgur.com/ypGmc.png)](https://i.stack.imgur.com/ypGmc.png) I will print the top and bottom",
"with painting on supports, but since something slides in this",
"matters when discussing some specific tools that are available which",
"the body at the start of the overhang, and placing",
"be fairly impractical) support structures. Consider my following design: [![enter"
] |
[
"printed a month ago, I am not precisely sure. I",
"month ago, I am not precisely sure. I think I",
"completely cured. The base is open (see picture below). it",
"open before! It was printed a month ago, I am",
"printed a figure in Resin, but after some months I",
"Mars. I have printed a figure in Resin, but after",
"an Elegoo Mars. I have printed a figure in Resin,",
"below). it wasn't open before! It was printed a month",
"not completely cured. The base is open (see picture below).",
"it is not completely cured. The base is open (see",
"was printed a month ago, I am not precisely sure.",
"3D print](https://i.stack.imgur.com/l4bBJ.jpg \"Base of 3D print\")](https://i.stack.imgur.com/l4bBJ.jpg \"Base of 3D print\")",
"if it is not completely cured. The base is open",
"a figure in Resin, but after some months I found",
"have an Elegoo Mars. I have printed a figure in",
"figure is as if it is not completely cured. The",
"the figure is as if it is not completely cured.",
"months I found this - the figure is as if",
"precisely sure. I think I only machine cured and sunlight.",
"only machine cured and sunlight. How is this possible? [![Base",
"but after some months I found this - the figure",
"after some months I found this - the figure is",
"I have printed a figure in Resin, but after some",
"picture below). it wasn't open before! It was printed a",
"I think I only machine cured and sunlight. How is",
"machine cured and sunlight. How is this possible? [![Base of",
"is not completely cured. The base is open (see picture",
"have printed a figure in Resin, but after some months",
"cured and sunlight. How is this possible? [![Base of 3D",
"is as if it is not completely cured. The base",
"I am not precisely sure. I think I only machine",
"sunlight. How is this possible? [![Base of 3D print](https://i.stack.imgur.com/l4bBJ.jpg \"Base",
"before! It was printed a month ago, I am not",
"and sunlight. How is this possible? [![Base of 3D print](https://i.stack.imgur.com/l4bBJ.jpg",
"am not precisely sure. I think I only machine cured",
"[![Base of 3D print](https://i.stack.imgur.com/l4bBJ.jpg \"Base of 3D print\")](https://i.stack.imgur.com/l4bBJ.jpg \"Base of",
"of 3D print](https://i.stack.imgur.com/l4bBJ.jpg \"Base of 3D print\")](https://i.stack.imgur.com/l4bBJ.jpg \"Base of 3D",
"The base is open (see picture below). it wasn't open",
"not precisely sure. I think I only machine cured and",
"- the figure is as if it is not completely",
"wasn't open before! It was printed a month ago, I",
"found this - the figure is as if it is",
"ago, I am not precisely sure. I think I only",
"is this possible? [![Base of 3D print](https://i.stack.imgur.com/l4bBJ.jpg \"Base of 3D",
"I only machine cured and sunlight. How is this possible?",
"I found this - the figure is as if it",
"base is open (see picture below). it wasn't open before!",
"Elegoo Mars. I have printed a figure in Resin, but",
"in Resin, but after some months I found this -",
"is open (see picture below). it wasn't open before! It",
"figure in Resin, but after some months I found this",
"Resin, but after some months I found this - the",
"a month ago, I am not precisely sure. I think",
"sure. I think I only machine cured and sunlight. How",
"How is this possible? [![Base of 3D print](https://i.stack.imgur.com/l4bBJ.jpg \"Base of",
"it wasn't open before! It was printed a month ago,",
"It was printed a month ago, I am not precisely",
"this possible? [![Base of 3D print](https://i.stack.imgur.com/l4bBJ.jpg \"Base of 3D print\")](https://i.stack.imgur.com/l4bBJ.jpg",
"(see picture below). it wasn't open before! It was printed",
"possible? [![Base of 3D print](https://i.stack.imgur.com/l4bBJ.jpg \"Base of 3D print\")](https://i.stack.imgur.com/l4bBJ.jpg \"Base",
"I have an Elegoo Mars. I have printed a figure",
"as if it is not completely cured. The base is",
"cured. The base is open (see picture below). it wasn't",
"open (see picture below). it wasn't open before! It was",
"this - the figure is as if it is not",
"think I only machine cured and sunlight. How is this",
"some months I found this - the figure is as"
] |
[
"follow up question for [What are viable substitutes for Raspberry",
"$70, so [at MSRP](https://www.raspberrypi.com/news/raspberry-pi-400-the-70-desktop-pc/), and about half of the current",
"does it have any benefits over regular Pi 4B? Is",
"as OctoPrint server, and does it have any benefits over",
"around $70, so [at MSRP](https://www.raspberrypi.com/news/raspberry-pi-400-the-70-desktop-pc/), and about half of the",
"challenges to using Raspberry Pi 400 as OctoPrint server, and",
"if I can really use it. Thus, are there any",
"over regular Pi 4B? Is there any ready-made manual about",
"can really use it. Thus, are there any special challenges",
"when it was available, and only now I started to",
"similar software for Prusa i3 MK3S+?](https://3dprinting.stackexchange.com/q/20196/20803) I was able to",
"to using Raspberry Pi 400 as OctoPrint server, and does",
"Is there any ready-made manual about it I could use?",
"the current pi 4b prices nowadays. Good deal given shortages,",
"Prusa i3 MK3S+?](https://3dprinting.stackexchange.com/q/20196/20803) I was able to grab Raspberry Pi",
"I ordered it when it was available, and only now",
"to grab Raspberry Pi 400 for around $70, so [at",
"only now I started to think if I can really",
"of the current pi 4b prices nowadays. Good deal given",
"it when it was available, and only now I started",
"special challenges to using Raspberry Pi 400 as OctoPrint server,",
"This is a follow up question for [What are viable",
"really use it. Thus, are there any special challenges to",
"grab Raspberry Pi 400 for around $70, so [at MSRP](https://www.raspberrypi.com/news/raspberry-pi-400-the-70-desktop-pc/),",
"use it. Thus, are there any special challenges to using",
"now I started to think if I can really use",
"any benefits over regular Pi 4B? Is there any ready-made",
"and about half of the current pi 4b prices nowadays.",
"up question for [What are viable substitutes for Raspberry Pi",
"and only now I started to think if I can",
"Raspberry Pi to run Octoprint or similar software for Prusa",
"deal given shortages, so I ordered it when it was",
"to think if I can really use it. Thus, are",
"benefits over regular Pi 4B? Is there any ready-made manual",
"4B? Is there any ready-made manual about it I could",
"it. Thus, are there any special challenges to using Raspberry",
"about half of the current pi 4b prices nowadays. Good",
"prices nowadays. Good deal given shortages, so I ordered it",
"to run Octoprint or similar software for Prusa i3 MK3S+?](https://3dprinting.stackexchange.com/q/20196/20803)",
"Raspberry Pi 400 as OctoPrint server, and does it have",
"there any special challenges to using Raspberry Pi 400 as",
"[at MSRP](https://www.raspberrypi.com/news/raspberry-pi-400-the-70-desktop-pc/), and about half of the current pi 4b",
"have any benefits over regular Pi 4B? Is there any",
"for Raspberry Pi to run Octoprint or similar software for",
"OctoPrint server, and does it have any benefits over regular",
"it have any benefits over regular Pi 4B? Is there",
"a follow up question for [What are viable substitutes for",
"current pi 4b prices nowadays. Good deal given shortages, so",
"MSRP](https://www.raspberrypi.com/news/raspberry-pi-400-the-70-desktop-pc/), and about half of the current pi 4b prices",
"Raspberry Pi 400 for around $70, so [at MSRP](https://www.raspberrypi.com/news/raspberry-pi-400-the-70-desktop-pc/), and",
"was available, and only now I started to think if",
"given shortages, so I ordered it when it was available,",
"nowadays. Good deal given shortages, so I ordered it when",
"400 for around $70, so [at MSRP](https://www.raspberrypi.com/news/raspberry-pi-400-the-70-desktop-pc/), and about half",
"server, and does it have any benefits over regular Pi",
"400 as OctoPrint server, and does it have any benefits",
"ordered it when it was available, and only now I",
"4b prices nowadays. Good deal given shortages, so I ordered",
"are viable substitutes for Raspberry Pi to run Octoprint or",
"any special challenges to using Raspberry Pi 400 as OctoPrint",
"and does it have any benefits over regular Pi 4B?",
"question for [What are viable substitutes for Raspberry Pi to",
"pi 4b prices nowadays. Good deal given shortages, so I",
"using Raspberry Pi 400 as OctoPrint server, and does it",
"for [What are viable substitutes for Raspberry Pi to run",
"Pi 400 for around $70, so [at MSRP](https://www.raspberrypi.com/news/raspberry-pi-400-the-70-desktop-pc/), and about",
"think if I can really use it. Thus, are there",
"regular Pi 4B? Is there any ready-made manual about it",
"viable substitutes for Raspberry Pi to run Octoprint or similar",
"substitutes for Raspberry Pi to run Octoprint or similar software",
"MK3S+?](https://3dprinting.stackexchange.com/q/20196/20803) I was able to grab Raspberry Pi 400 for",
"Good deal given shortages, so I ordered it when it",
"for Prusa i3 MK3S+?](https://3dprinting.stackexchange.com/q/20196/20803) I was able to grab Raspberry",
"half of the current pi 4b prices nowadays. Good deal",
"or similar software for Prusa i3 MK3S+?](https://3dprinting.stackexchange.com/q/20196/20803) I was able",
"shortages, so I ordered it when it was available, and",
"it was available, and only now I started to think",
"able to grab Raspberry Pi 400 for around $70, so",
"i3 MK3S+?](https://3dprinting.stackexchange.com/q/20196/20803) I was able to grab Raspberry Pi 400",
"is a follow up question for [What are viable substitutes",
"I can really use it. Thus, are there any special",
"for around $70, so [at MSRP](https://www.raspberrypi.com/news/raspberry-pi-400-the-70-desktop-pc/), and about half of",
"so [at MSRP](https://www.raspberrypi.com/news/raspberry-pi-400-the-70-desktop-pc/), and about half of the current pi",
"are there any special challenges to using Raspberry Pi 400",
"was able to grab Raspberry Pi 400 for around $70,",
"[What are viable substitutes for Raspberry Pi to run Octoprint",
"Pi to run Octoprint or similar software for Prusa i3",
"Pi 4B? Is there any ready-made manual about it I",
"available, and only now I started to think if I",
"I was able to grab Raspberry Pi 400 for around",
"run Octoprint or similar software for Prusa i3 MK3S+?](https://3dprinting.stackexchange.com/q/20196/20803) I",
"Pi 400 as OctoPrint server, and does it have any",
"I started to think if I can really use it.",
"started to think if I can really use it. Thus,",
"Thus, are there any special challenges to using Raspberry Pi",
"Octoprint or similar software for Prusa i3 MK3S+?](https://3dprinting.stackexchange.com/q/20196/20803) I was",
"so I ordered it when it was available, and only",
"software for Prusa i3 MK3S+?](https://3dprinting.stackexchange.com/q/20196/20803) I was able to grab"
] |
[
"sticking to bed. I noticed that the nozzle is approx",
"Touch. Set printer up, switched on, ran bed levelling as",
"5 mm above bed when printing. On this model there",
"with CR Touch. Set printer up, switched on, ran bed",
"on, ran bed levelling as per instructions, and tried first",
"tried first print. Filament is not sticking to bed. I",
"Brand new Ender 3 V2 Neo with CR Touch. Set",
"V2 Neo with CR Touch. Set printer up, switched on,",
"Neo with CR Touch. Set printer up, switched on, ran",
"bed when printing. On this model there is no manual",
"instructions, and tried first print. Filament is not sticking to",
"printing. On this model there is no manual levelling, just",
"not sticking to bed. I noticed that the nozzle is",
"new Ender 3 V2 Neo with CR Touch. Set printer",
"when printing. On this model there is no manual levelling,",
"first print. Filament is not sticking to bed. I noticed",
"approx 5 mm above bed when printing. On this model",
"up, switched on, ran bed levelling as per instructions, and",
"CR Touch. Set printer up, switched on, ran bed levelling",
"is approx 5 mm above bed when printing. On this",
"switched on, ran bed levelling as per instructions, and tried",
"per instructions, and tried first print. Filament is not sticking",
"noticed that the nozzle is approx 5 mm above bed",
"levelling as per instructions, and tried first print. Filament is",
"and tried first print. Filament is not sticking to bed.",
"I noticed that the nozzle is approx 5 mm above",
"On this model there is no manual levelling, just auto.",
"nozzle is approx 5 mm above bed when printing. On",
"this model there is no manual levelling, just auto. Any",
"is not sticking to bed. I noticed that the nozzle",
"bed. I noticed that the nozzle is approx 5 mm",
"as per instructions, and tried first print. Filament is not",
"that the nozzle is approx 5 mm above bed when",
"bed levelling as per instructions, and tried first print. Filament",
"Set printer up, switched on, ran bed levelling as per",
"Filament is not sticking to bed. I noticed that the",
"the nozzle is approx 5 mm above bed when printing.",
"printer up, switched on, ran bed levelling as per instructions,",
"above bed when printing. On this model there is no",
"mm above bed when printing. On this model there is",
"3 V2 Neo with CR Touch. Set printer up, switched",
"model there is no manual levelling, just auto. Any ideas?",
"Ender 3 V2 Neo with CR Touch. Set printer up,",
"print. Filament is not sticking to bed. I noticed that",
"ran bed levelling as per instructions, and tried first print.",
"to bed. I noticed that the nozzle is approx 5"
] |
[
"toy (printed using food-safe filaments) to a toddler? Are there",
"food-safe filaments) to a toddler? Are there any recommendations/studies on",
"a 3D printed toy (printed using food-safe filaments) to a",
"using food-safe filaments) to a toddler? Are there any recommendations/studies",
"a toddler? Are there any recommendations/studies on what is considered",
"to give a 3D printed toy (printed using food-safe filaments)",
"filaments) to a toddler? Are there any recommendations/studies on what",
"give a 3D printed toy (printed using food-safe filaments) to",
"it safe to give a 3D printed toy (printed using",
"Is it safe to give a 3D printed toy (printed",
"3D printed toy (printed using food-safe filaments) to a toddler?",
"(printed using food-safe filaments) to a toddler? Are there any",
"toddler? Are there any recommendations/studies on what is considered safe?",
"printed toy (printed using food-safe filaments) to a toddler? Are",
"safe to give a 3D printed toy (printed using food-safe",
"to a toddler? Are there any recommendations/studies on what is"
] |
[
"should handle a little water, but I'm looking for a",
"edges into it) and then hardens to a rubber like",
"for a way to seal the seams where the cases",
"or o-rings to them would be very complicated. And if",
"the cases are put together. As mentioned, the cases must",
"normally very thin, so gluing rubber bands or o-rings to",
"applied to the edges with a brush (or by dipping",
"together. As mentioned, the cases must endure light to medium",
"that sticks to the part it was applied to. Other",
"one for a Raspberry Pi 4 and two for smaller",
"be frequently dis- and reassembled, which should work without the",
"of viscous liquid that is applied to the edges with",
"into it) and then hardens to a rubber like texture",
"was hoping that maybe there was some kind of viscous",
"how to open the cases again? I was hoping that",
"so gluing rubber bands or o-rings to them would be",
"electronics, one for a Raspberry Pi 4 and two for",
"it) and then hardens to a rubber like texture that",
"should work without the sealing being destroyed. The edges of",
"thin, so gluing rubber bands or o-rings to them would",
"that is applied to the edges with a brush (or",
"to the edges with a brush (or by dipping the",
"but I'm looking for a way to seal the seams",
"to open the cases again? I was hoping that maybe",
"open the cases again? I was hoping that maybe there",
"a sealant coating, how to open the cases again? I",
"there was some kind of viscous liquid that is applied",
"texture that sticks to the part it was applied to.",
"smaller electronics, using ABS. These cases will be attached to",
"hardens to a rubber like texture that sticks to the",
"then hardens to a rubber like texture that sticks to",
"bands or o-rings to them would be very complicated. And",
"medium rain. Also, they might be frequently dis- and reassembled,",
"be exposed to rain. The cases itself should handle a",
"printing several cases for electronics, one for a Raspberry Pi",
"dis- and reassembled, which should work without the sealing being",
"cases must endure light to medium rain. Also, they might",
"frequently dis- and reassembled, which should work without the sealing",
"seal the seams where the cases are put together. As",
"drone which might be exposed to rain. The cases itself",
"them would be very complicated. And if I apply a",
"cases itself should handle a little water, but I'm looking",
"water, but I'm looking for a way to seal the",
"The edges of the case parts are normally very thin,",
"hoping that maybe there was some kind of viscous liquid",
"work without the sealing being destroyed. The edges of the",
"being destroyed. The edges of the case parts are normally",
"very complicated. And if I apply a sealant coating, how",
"for electronics, one for a Raspberry Pi 4 and two",
"a way to seal the seams where the cases are",
"the seams where the cases are put together. As mentioned,",
"dipping the edges into it) and then hardens to a",
"a little water, but I'm looking for a way to",
"the case parts are normally very thin, so gluing rubber",
"seams where the cases are put together. As mentioned, the",
"rain. Also, they might be frequently dis- and reassembled, which",
"Pi 4 and two for smaller electronics, using ABS. These",
"light to medium rain. Also, they might be frequently dis-",
"some kind of viscous liquid that is applied to the",
"(or by dipping the edges into it) and then hardens",
"cases again? I was hoping that maybe there was some",
"parts are normally very thin, so gluing rubber bands or",
"kind of viscous liquid that is applied to the edges",
"to seal the seams where the cases are put together.",
"several cases for electronics, one for a Raspberry Pi 4",
"are normally very thin, so gluing rubber bands or o-rings",
"brush (or by dipping the edges into it) and then",
"would be very complicated. And if I apply a sealant",
"As mentioned, the cases must endure light to medium rain.",
"sealant coating, how to open the cases again? I was",
"where the cases are put together. As mentioned, the cases",
"a Raspberry Pi 4 and two for smaller electronics, using",
"to medium rain. Also, they might be frequently dis- and",
"which should work without the sealing being destroyed. The edges",
"electronics, using ABS. These cases will be attached to a",
"handle a little water, but I'm looking for a way",
"currently printing several cases for electronics, one for a Raspberry",
"Also, they might be frequently dis- and reassembled, which should",
"was applied to. Other Ideas are welcome too, of course.",
"rubber bands or o-rings to them would be very complicated.",
"rubber like texture that sticks to the part it was",
"and then hardens to a rubber like texture that sticks",
"And if I apply a sealant coating, how to open",
"that maybe there was some kind of viscous liquid that",
"endure light to medium rain. Also, they might be frequently",
"coating, how to open the cases again? I was hoping",
"cases for electronics, one for a Raspberry Pi 4 and",
"might be frequently dis- and reassembled, which should work without",
"which might be exposed to rain. The cases itself should",
"might be exposed to rain. The cases itself should handle",
"they might be frequently dis- and reassembled, which should work",
"The cases itself should handle a little water, but I'm",
"the cases again? I was hoping that maybe there was",
"exposed to rain. The cases itself should handle a little",
"the cases must endure light to medium rain. Also, they",
"using ABS. These cases will be attached to a drone",
"be attached to a drone which might be exposed to",
"for smaller electronics, using ABS. These cases will be attached",
"a drone which might be exposed to rain. The cases",
"ABS. These cases will be attached to a drone which",
"sticks to the part it was applied to. Other Ideas",
"to the part it was applied to. Other Ideas are",
"with a brush (or by dipping the edges into it)",
"the edges into it) and then hardens to a rubber",
"of the case parts are normally very thin, so gluing",
"attached to a drone which might be exposed to rain.",
"itself should handle a little water, but I'm looking for",
"reassembled, which should work without the sealing being destroyed. The",
"will be attached to a drone which might be exposed",
"are put together. As mentioned, the cases must endure light",
"I was hoping that maybe there was some kind of",
"part it was applied to. Other Ideas are welcome too,",
"to a drone which might be exposed to rain. The",
"cases will be attached to a drone which might be",
"it was applied to. Other Ideas are welcome too, of",
"I apply a sealant coating, how to open the cases",
"to a rubber like texture that sticks to the part",
"I'm looking for a way to seal the seams where",
"put together. As mentioned, the cases must endure light to",
"must endure light to medium rain. Also, they might be",
"sealing being destroyed. The edges of the case parts are",
"and reassembled, which should work without the sealing being destroyed.",
"Raspberry Pi 4 and two for smaller electronics, using ABS.",
"to them would be very complicated. And if I apply",
"again? I was hoping that maybe there was some kind",
"edges with a brush (or by dipping the edges into",
"if I apply a sealant coating, how to open the",
"way to seal the seams where the cases are put",
"gluing rubber bands or o-rings to them would be very",
"very thin, so gluing rubber bands or o-rings to them",
"be very complicated. And if I apply a sealant coating,",
"4 and two for smaller electronics, using ABS. These cases",
"a rubber like texture that sticks to the part it",
"liquid that is applied to the edges with a brush",
"two for smaller electronics, using ABS. These cases will be",
"edges of the case parts are normally very thin, so",
"to rain. The cases itself should handle a little water,",
"was some kind of viscous liquid that is applied to",
"These cases will be attached to a drone which might",
"the sealing being destroyed. The edges of the case parts",
"like texture that sticks to the part it was applied",
"maybe there was some kind of viscous liquid that is",
"o-rings to them would be very complicated. And if I",
"without the sealing being destroyed. The edges of the case",
"little water, but I'm looking for a way to seal",
"I'm currently printing several cases for electronics, one for a",
"cases are put together. As mentioned, the cases must endure",
"the edges with a brush (or by dipping the edges",
"a brush (or by dipping the edges into it) and",
"by dipping the edges into it) and then hardens to",
"looking for a way to seal the seams where the",
"and two for smaller electronics, using ABS. These cases will",
"for a Raspberry Pi 4 and two for smaller electronics,",
"mentioned, the cases must endure light to medium rain. Also,",
"apply a sealant coating, how to open the cases again?",
"complicated. And if I apply a sealant coating, how to",
"case parts are normally very thin, so gluing rubber bands",
"rain. The cases itself should handle a little water, but",
"the part it was applied to. Other Ideas are welcome",
"viscous liquid that is applied to the edges with a",
"destroyed. The edges of the case parts are normally very",
"is applied to the edges with a brush (or by"
] |
[
"or how far from the print bed, or how often",
"new Ender 3 v2, and tuning the z-steps value, I",
"the same print. My current setup is OctoPrint running on",
"My current setup is OctoPrint running on a raspberry pi",
"value, I noticed that some layers were extending beyond the",
"raspberry pi 3B, connected via USB to the recently-assembled Ender",
"z-steps value, I noticed that some layers were extending beyond",
"the wrong number of steps are being performed, or that",
"be that the wrong number of steps are being performed,",
"or that the screw isn't turning along with the stepper,",
"same print. My current setup is OctoPrint running on a",
"to the z-axis stepping isn't lifting the print-head. It might",
"turning along with the stepper, or that there is some",
"was setting up a new Ender 3 v2, and tuning",
"didn't notice any pattern related to which layer, or how",
"the screw isn't turning along with the stepper, or that",
"Ender 3v2. My current theory is that something related to",
"the print bed, or how often they might repeat during",
"image description here](https://i.stack.imgur.com/N3XeE.jpg)](https://i.stack.imgur.com/N3XeE.jpg) While I was setting up a new",
"the z-axis stepping isn't lifting the print-head. It might be",
"along with the stepper, or that there is some kind",
"stepping isn't lifting the print-head. It might be that the",
"Ender 3 v2, and tuning the z-steps value, I noticed",
"might repeat during the same print. My current setup is",
"that some layers were extending beyond the others in the",
"theory is that something related to the z-axis stepping isn't",
"isn't turning along with the stepper, or that there is",
"My current theory is that something related to the z-axis",
"OctoPrint running on a raspberry pi 3B, connected via USB",
"I noticed that some layers were extending beyond the others",
"and y axes. I didn't notice any pattern related to",
"that the screw isn't turning along with the stepper, or",
"3v2. My current theory is that something related to the",
"USB to the recently-assembled Ender 3v2. My current theory is",
"axes. I didn't notice any pattern related to which layer,",
"the print-head. It might be that the wrong number of",
"x and y axes. I didn't notice any pattern related",
"the z-steps value, I noticed that some layers were extending",
"which layer, or how far from the print bed, or",
"noticed that some layers were extending beyond the others in",
"number of steps are being performed, or that the screw",
"far from the print bed, or how often they might",
"repeat during the same print. My current setup is OctoPrint",
"[](https://i.stack.imgur.com/N3XeE.jpg) While I was setting up a",
"a raspberry pi 3B, connected via USB to the recently-assembled",
"isn't lifting the print-head. It might be that the wrong",
"notice any pattern related to which layer, or how far",
"connected via USB to the recently-assembled Ender 3v2. My current",
"something related to the z-axis stepping isn't lifting the print-head.",
"is some kind of friction or binding keeping the x-axis",
"y axes. I didn't notice any pattern related to which",
"It might be that the wrong number of steps are",
"in the x and y axes. I didn't notice any",
"that there is some kind of friction or binding keeping",
"3B, connected via USB to the recently-assembled Ender 3v2. My",
"the recently-assembled Ender 3v2. My current theory is that something",
"some layers were extending beyond the others in the x",
"tuning the z-steps value, I noticed that some layers were",
"lifting the print-head. It might be that the wrong number",
"are being performed, or that the screw isn't turning along",
"While I was setting up a new Ender 3 v2,",
"with the stepper, or that there is some kind of",
"of friction or binding keeping the x-axis beam from raising.",
"on a raspberry pi 3B, connected via USB to the",
"pattern related to which layer, or how far from the",
"others in the x and y axes. I didn't notice",
"how far from the print bed, or how often they",
"wrong number of steps are being performed, or that the",
"and tuning the z-steps value, I noticed that some layers",
"running on a raspberry pi 3B, connected via USB to",
"v2, and tuning the z-steps value, I noticed that some",
"related to the z-axis stepping isn't lifting the print-head. It",
"extending beyond the others in the x and y axes.",
"print bed, or how often they might repeat during the",
"layers were extending beyond the others in the x and",
"often they might repeat during the same print. My current",
"during the same print. My current setup is OctoPrint running",
"pi 3B, connected via USB to the recently-assembled Ender 3v2.",
"setup is OctoPrint running on a raspberry pi 3B, connected",
"the x and y axes. I didn't notice any pattern",
"via USB to the recently-assembled Ender 3v2. My current theory",
"here](https://i.stack.imgur.com/N3XeE.jpg)](https://i.stack.imgur.com/N3XeE.jpg) While I was setting up a new Ender 3",
"might be that the wrong number of steps are being",
"kind of friction or binding keeping the x-axis beam from",
"of steps are being performed, or that the screw isn't",
"to which layer, or how far from the print bed,",
"that something related to the z-axis stepping isn't lifting the",
"print. My current setup is OctoPrint running on a raspberry",
"recently-assembled Ender 3v2. My current theory is that something related",
"z-axis stepping isn't lifting the print-head. It might be that",
"the stepper, or that there is some kind of friction",
"related to which layer, or how far from the print",
"being performed, or that the screw isn't turning along with",
"bed, or how often they might repeat during the same",
"a new Ender 3 v2, and tuning the z-steps value,",
"screw isn't turning along with the stepper, or that there",
"3 v2, and tuning the z-steps value, I noticed that",
"description here](https://i.stack.imgur.com/N3XeE.jpg)](https://i.stack.imgur.com/N3XeE.jpg) While I was setting up a new Ender",
"I was setting up a new Ender 3 v2, and",
"layer, or how far from the print bed, or how",
"performed, or that the screw isn't turning along with the",
"how often they might repeat during the same print. My",
"print-head. It might be that the wrong number of steps",
"is OctoPrint running on a raspberry pi 3B, connected via",
"up a new Ender 3 v2, and tuning the z-steps",
"steps are being performed, or that the screw isn't turning",
"or that there is some kind of friction or binding",
"to the recently-assembled Ender 3v2. My current theory is that",
"any pattern related to which layer, or how far from",
"setting up a new Ender 3 v2, and tuning the",
"some kind of friction or binding keeping the x-axis beam",
"I didn't notice any pattern related to which layer, or",
"current setup is OctoPrint running on a raspberry pi 3B,",
"there is some kind of friction or binding keeping the",
"beyond the others in the x and y axes. I",
"were extending beyond the others in the x and y",
"they might repeat during the same print. My current setup",
"current theory is that something related to the z-axis stepping",
"that the wrong number of steps are being performed, or",
"stepper, or that there is some kind of friction or",
"or how often they might repeat during the same print.",
"the others in the x and y axes. I didn't",
"from the print bed, or how often they might repeat",
"is that something related to the z-axis stepping isn't lifting"
] |
[
"thing is details and curves have disappeared and smooth surfaces",
"load it in **Lychee**. The only thing is details and",
"to experiment with a 3D printer and downloaded **Lychee Slicer**",
"with a 3D printer and downloaded **Lychee Slicer** and wanted",
"in **Lychee**. The only thing is details and curves have",
"and downloaded **Lychee Slicer** and wanted to print an Unreal",
"this something that can be fixed? [![Screenshot of a 3D",
"is details and curves have disappeared and smooth surfaces are",
"Unreal Engine\")](https://i.stack.imgur.com/IAXgd.jpg \"Screenshot of a 3D model in Unreal Engine\")",
"in Unreal Engine\") [![Screenshot of a 3D model in Lychee",
"of a 3D model in Lychee Slicer\")](https://i.stack.imgur.com/cPBCL.png \"Screenshot of a",
"of a 3D model in Lychee Slicer](https://i.stack.imgur.com/cPBCL.png \"Screenshot of a",
"an Unreal asset. I took a [free one](https://www.unrealengine.com/marketplace/en-US/product/paragon-steel) from the",
"Lychee Slicer\")](https://i.stack.imgur.com/cPBCL.png \"Screenshot of a 3D model in Lychee Slicer\")",
"Engine](https://i.stack.imgur.com/IAXgd.jpg \"Screenshot of a 3D model in Unreal Engine\")](https://i.stack.imgur.com/IAXgd.jpg \"Screenshot",
"it in **Lychee**. The only thing is details and curves",
"can load it in **Lychee**. The only thing is details",
"and smooth surfaces are visible polygons. Is this something that",
"so I can load it in **Lychee**. The only thing",
"and curves have disappeared and smooth surfaces are visible polygons.",
"model in Unreal Engine](https://i.stack.imgur.com/IAXgd.jpg \"Screenshot of a 3D model in",
"I wanted to experiment with a 3D printer and downloaded",
"fixed? [![Screenshot of a 3D model in Unreal Engine](https://i.stack.imgur.com/IAXgd.jpg \"Screenshot",
"of a 3D model in Unreal Engine\") [![Screenshot of a",
"surfaces are visible polygons. Is this something that can be",
"disappeared and smooth surfaces are visible polygons. Is this something",
"be fixed? [![Screenshot of a 3D model in Unreal Engine](https://i.stack.imgur.com/IAXgd.jpg",
"curves have disappeared and smooth surfaces are visible polygons. Is",
"in Unreal Engine\")](https://i.stack.imgur.com/IAXgd.jpg \"Screenshot of a 3D model in Unreal",
"only thing is details and curves have disappeared and smooth",
"wanted to experiment with a 3D printer and downloaded **Lychee",
"**Lychee Slicer** and wanted to print an Unreal asset. I",
"a 3D model in Lychee Slicer\")](https://i.stack.imgur.com/cPBCL.png \"Screenshot of a 3D",
"in Lychee Slicer\")](https://i.stack.imgur.com/cPBCL.png \"Screenshot of a 3D model in Lychee",
"print an Unreal asset. I took a [free one](https://www.unrealengine.com/marketplace/en-US/product/paragon-steel) from",
"in Unreal Engine](https://i.stack.imgur.com/IAXgd.jpg \"Screenshot of a 3D model in Unreal",
"can be fixed? [![Screenshot of a 3D model in Unreal",
"a 3D model in Unreal Engine](https://i.stack.imgur.com/IAXgd.jpg \"Screenshot of a 3D",
"model in Unreal Engine\")](https://i.stack.imgur.com/IAXgd.jpg \"Screenshot of a 3D model in",
"a 3D model in Unreal Engine\")](https://i.stack.imgur.com/IAXgd.jpg \"Screenshot of a 3D",
"a [free one](https://www.unrealengine.com/marketplace/en-US/product/paragon-steel) from the store and exported the static",
"as `.obj`, so I can load it in **Lychee**. The",
"smooth surfaces are visible polygons. Is this something that can",
"in Lychee Slicer](https://i.stack.imgur.com/cPBCL.png \"Screenshot of a 3D model in Lychee",
"wanted to print an Unreal asset. I took a [free",
"that can be fixed? [![Screenshot of a 3D model in",
"are visible polygons. Is this something that can be fixed?",
"the static mesh as `.obj`, so I can load it",
"3D model in Lychee Slicer\")](https://i.stack.imgur.com/cPBCL.png \"Screenshot of a 3D model",
"**Lychee**. The only thing is details and curves have disappeared",
"I took a [free one](https://www.unrealengine.com/marketplace/en-US/product/paragon-steel) from the store and exported",
"Unreal Engine](https://i.stack.imgur.com/IAXgd.jpg \"Screenshot of a 3D model in Unreal Engine\")](https://i.stack.imgur.com/IAXgd.jpg",
"visible polygons. Is this something that can be fixed? [![Screenshot",
"a 3D model in Lychee Slicer](https://i.stack.imgur.com/cPBCL.png \"Screenshot of a 3D",
"3D model in Unreal Engine\") [ from the store and",
"the store and exported the static mesh as `.obj`, so",
"something that can be fixed? [![Screenshot of a 3D model",
"of a 3D model in Unreal Engine](https://i.stack.imgur.com/IAXgd.jpg \"Screenshot of a",
"took a [free one](https://www.unrealengine.com/marketplace/en-US/product/paragon-steel) from the store and exported the",
"Engine\") [![Screenshot of a 3D model in Lychee Slicer](https://i.stack.imgur.com/cPBCL.png \"Screenshot",
"[![Screenshot of a 3D model in Lychee Slicer](https://i.stack.imgur.com/cPBCL.png \"Screenshot of",
"Engine\")](https://i.stack.imgur.com/IAXgd.jpg \"Screenshot of a 3D model in Unreal Engine\") [![Screenshot",
"polygons. Is this something that can be fixed? [![Screenshot of",
"3D printer and downloaded **Lychee Slicer** and wanted to print",
"from the store and exported the static mesh as `.obj`,",
"model in Lychee Slicer](https://i.stack.imgur.com/cPBCL.png \"Screenshot of a 3D model in",
"Lychee Slicer](https://i.stack.imgur.com/cPBCL.png \"Screenshot of a 3D model in Lychee Slicer\")](https://i.stack.imgur.com/cPBCL.png",
"and wanted to print an Unreal asset. I took a",
"`.obj`, so I can load it in **Lychee**. The only",
"details and curves have disappeared and smooth surfaces are visible",
"\"Screenshot of a 3D model in Lychee Slicer\")](https://i.stack.imgur.com/cPBCL.png \"Screenshot of",
"3D model in Unreal Engine\")](https://i.stack.imgur.com/IAXgd.jpg \"Screenshot of a 3D model",
"Unreal Engine\") [![Screenshot of a 3D model in Lychee Slicer](https://i.stack.imgur.com/cPBCL.png",
"I can load it in **Lychee**. The only thing is",
"\"Screenshot of a 3D model in Unreal Engine\") [![Screenshot of",
"a 3D printer and downloaded **Lychee Slicer** and wanted to",
"3D model in Lychee Slicer](https://i.stack.imgur.com/cPBCL.png \"Screenshot of a 3D model",
"\"Screenshot of a 3D model in Unreal Engine\")](https://i.stack.imgur.com/IAXgd.jpg \"Screenshot of",
"Unreal asset. I took a [free one](https://www.unrealengine.com/marketplace/en-US/product/paragon-steel) from the store",
"mesh as `.obj`, so I can load it in **Lychee**.",
"of a 3D model in Unreal Engine\")](https://i.stack.imgur.com/IAXgd.jpg \"Screenshot of a",
"The only thing is details and curves have disappeared and",
"store and exported the static mesh as `.obj`, so I",
"and exported the static mesh as `.obj`, so I can",
"3D model in Unreal Engine](https://i.stack.imgur.com/IAXgd.jpg \"Screenshot of a 3D model",
"printer and downloaded **Lychee Slicer** and wanted to print an",
"to print an Unreal asset. I took a [free one](https://www.unrealengine.com/marketplace/en-US/product/paragon-steel)",
"static mesh as `.obj`, so I can load it in",
"have disappeared and smooth surfaces are visible polygons. Is this",
"one](https://www.unrealengine.com/marketplace/en-US/product/paragon-steel) from the store and exported the static mesh as",
"Slicer](https://i.stack.imgur.com/cPBCL.png \"Screenshot of a 3D model in Lychee Slicer\")](https://i.stack.imgur.com/cPBCL.png \"Screenshot",
"[free one](https://www.unrealengine.com/marketplace/en-US/product/paragon-steel) from the store and exported the static mesh",
"exported the static mesh as `.obj`, so I can load",
"model in Lychee Slicer\")](https://i.stack.imgur.com/cPBCL.png \"Screenshot of a 3D model in",
"[![Screenshot of a 3D model in Unreal Engine](https://i.stack.imgur.com/IAXgd.jpg \"Screenshot of"
] |
[
"generator for my 2D printer at [here](https://cnc-apps.com/en/app/circle), in which I",
"How can I solve this issue? Pardon me, I only",
"task, I want to draw a circle. If anyone has",
"settings\")](https://i.stack.imgur.com/xfnfS.png \"Screenshot of online G-code generator settings\") [![Screenshot of UGS",
"now as a beginner task, I want to draw a",
"not showing any circle in that software. How can I",
"\"Screenshot of UGS software with no G-code shown\")](https://i.stack.imgur.com/sfcu6.png \"Screenshot of",
"CNC 2 days ago and I have jogged my 2D",
"feel free to share it with me. I appreciate it",
"me. I appreciate it :) [![Screenshot of online G-code generator",
"circle shape G-code online generator for my 2D printer at",
"a beginner task, I want to draw a circle. If",
"it works well, so now as a beginner task, I",
"Pardon me, I only started CNC 2 days ago and",
"generator settings](https://i.stack.imgur.com/xfnfS.png \"Screenshot of online G-code generator settings\")](https://i.stack.imgur.com/xfnfS.png \"Screenshot of",
"I appreciate it :) [![Screenshot of online G-code generator settings](https://i.stack.imgur.com/xfnfS.png",
"G-code shown](https://i.stack.imgur.com/sfcu6.png \"Screenshot of UGS software with no G-code shown\")](https://i.stack.imgur.com/sfcu6.png",
"solve this issue? Pardon me, I only started CNC 2",
"want to draw a circle. If anyone has experience with",
"showing any circle in that software. How can I solve",
"the website and try to open it with UGS plotter",
"I built and it works well, so now as a",
"anyone has experience with G-code, feel free to share it",
"generator settings\") [![Screenshot of UGS software with no G-code shown](https://i.stack.imgur.com/sfcu6.png",
"it is not showing any circle in that software. How",
"which I created a 100 mm circle. I downloaded the",
"printer I built and it works well, so now as",
"days ago and I have jogged my 2D printer I",
"2 days ago and I have jogged my 2D printer",
"only started CNC 2 days ago and I have jogged",
"G-code generator settings](https://i.stack.imgur.com/xfnfS.png \"Screenshot of online G-code generator settings\")](https://i.stack.imgur.com/xfnfS.png \"Screenshot",
"[here](https://cnc-apps.com/en/app/circle), in which I created a 100 mm circle. I",
"a 100 mm circle. I downloaded the G-code from the",
"G-code generator settings\")](https://i.stack.imgur.com/xfnfS.png \"Screenshot of online G-code generator settings\") [![Screenshot",
"online G-code generator settings\")](https://i.stack.imgur.com/xfnfS.png \"Screenshot of online G-code generator settings\")",
"in which I created a 100 mm circle. I downloaded",
"\"Screenshot of online G-code generator settings\") [![Screenshot of UGS software",
"to open it with UGS plotter but it is not",
":) [![Screenshot of online G-code generator settings](https://i.stack.imgur.com/xfnfS.png \"Screenshot of online",
"jogged my 2D printer I built and it works well,",
"circle. If anyone has experience with G-code, feel free to",
"and I have jogged my 2D printer I built and",
"no G-code shown](https://i.stack.imgur.com/sfcu6.png \"Screenshot of UGS software with no G-code",
"printer at [here](https://cnc-apps.com/en/app/circle), in which I created a 100 mm",
"I want to draw a circle. If anyone has experience",
"created a 100 mm circle. I downloaded the G-code from",
"with G-code, feel free to share it with me. I",
"me, I only started CNC 2 days ago and I",
"experience with G-code, feel free to share it with me.",
"a circle shape G-code online generator for my 2D printer",
"open it with UGS plotter but it is not showing",
"for my 2D printer at [here](https://cnc-apps.com/en/app/circle), in which I created",
"can I solve this issue? Pardon me, I only started",
"and try to open it with UGS plotter but it",
"my 2D printer at [here](https://cnc-apps.com/en/app/circle), in which I created a",
"with no G-code shown](https://i.stack.imgur.com/sfcu6.png \"Screenshot of UGS software with no",
"I only started CNC 2 days ago and I have",
"settings\") [![Screenshot of UGS software with no G-code shown](https://i.stack.imgur.com/sfcu6.png \"Screenshot",
"is not showing any circle in that software. How can",
"If anyone has experience with G-code, feel free to share",
"built and it works well, so now as a beginner",
"ago and I have jogged my 2D printer I built",
"my 2D printer I built and it works well, so",
"with UGS plotter but it is not showing any circle",
"plotter but it is not showing any circle in that",
"and it works well, so now as a beginner task,",
"100 mm circle. I downloaded the G-code from the website",
"well, so now as a beginner task, I want to",
"to share it with me. I appreciate it :) [![Screenshot",
"that software. How can I solve this issue? Pardon me,",
"software. How can I solve this issue? Pardon me, I",
"started CNC 2 days ago and I have jogged my",
"it with UGS plotter but it is not showing any",
"it :) [![Screenshot of online G-code generator settings](https://i.stack.imgur.com/xfnfS.png \"Screenshot of",
"online G-code generator settings\") [, in",
"with no G-code shown\")](https://i.stack.imgur.com/sfcu6.png \"Screenshot of UGS software with no",
"UGS plotter but it is not showing any circle in",
"no G-code shown\")](https://i.stack.imgur.com/sfcu6.png \"Screenshot of UGS software with no G-code",
"G-code, feel free to share it with me. I appreciate",
"of online G-code generator settings\")](https://i.stack.imgur.com/xfnfS.png \"Screenshot of online G-code generator",
"as a beginner task, I want to draw a circle.",
"this issue? Pardon me, I only started CNC 2 days",
"any circle in that software. How can I solve this",
"free to share it with me. I appreciate it :)",
"online G-code generator settings](https://i.stack.imgur.com/xfnfS.png \"Screenshot of online G-code generator settings\")](https://i.stack.imgur.com/xfnfS.png",
"to a circle shape G-code online generator for my 2D",
"of UGS software with no G-code shown](https://i.stack.imgur.com/sfcu6.png \"Screenshot of UGS",
"UGS software with no G-code shown\")](https://i.stack.imgur.com/sfcu6.png \"Screenshot of UGS software",
"I solve this issue? Pardon me, I only started CNC",
"I created a 100 mm circle. I downloaded the G-code",
"of online G-code generator settings](https://i.stack.imgur.com/xfnfS.png \"Screenshot of online G-code generator",
"have jogged my 2D printer I built and it works",
"at [here](https://cnc-apps.com/en/app/circle), in which I created a 100 mm circle.",
"the G-code from the website and try to open it",
"G-code shown\")](https://i.stack.imgur.com/sfcu6.png \"Screenshot of UGS software with no G-code shown\")",
"G-code generator settings\") [![Screenshot of UGS software with no G-code",
"UGS software with no G-code shown](https://i.stack.imgur.com/sfcu6.png \"Screenshot of UGS software",
"to draw a circle. If anyone has experience with G-code,",
"issue? Pardon me, I only started CNC 2 days ago",
"website and try to open it with UGS plotter but",
"2D printer at [here](https://cnc-apps.com/en/app/circle), in which I created a 100",
"of online G-code generator settings\") [![Screenshot of UGS software with",
"circle in that software. How can I solve this issue?",
"[![Screenshot of online G-code generator settings](https://i.stack.imgur.com/xfnfS.png \"Screenshot of online G-code",
"[![Screenshot of UGS software with no G-code shown](https://i.stack.imgur.com/sfcu6.png \"Screenshot of",
"settings](https://i.stack.imgur.com/xfnfS.png \"Screenshot of online G-code generator settings\")](https://i.stack.imgur.com/xfnfS.png \"Screenshot of online",
"I have jogged my 2D printer I built and it",
"appreciate it :) [![Screenshot of online G-code generator settings](https://i.stack.imgur.com/xfnfS.png \"Screenshot",
"share it with me. I appreciate it :) [, in which",
"software with no G-code shown\")](https://i.stack.imgur.com/sfcu6.png \"Screenshot of UGS software with",
"beginner task, I want to draw a circle. If anyone",
"software with no G-code shown](https://i.stack.imgur.com/sfcu6.png \"Screenshot of UGS software with",
"shape G-code online generator for my 2D printer at [here](https://cnc-apps.com/en/app/circle),",
"but it is not showing any circle in that software.",
"it with me. I appreciate it :) [![Screenshot of online",
"2D printer I built and it works well, so now",
"shown](https://i.stack.imgur.com/sfcu6.png \"Screenshot of UGS software with no G-code shown\")](https://i.stack.imgur.com/sfcu6.png \"Screenshot",
"try to open it with UGS plotter but it is",
"G-code from the website and try to open it with",
"downloaded the G-code from the website and try to open",
"draw a circle. If anyone has experience with G-code, feel",
"I downloaded the G-code from the website and try to",
"mm circle. I downloaded the G-code from the website and",
"of UGS software with no G-code shown\")](https://i.stack.imgur.com/sfcu6.png \"Screenshot of UGS",
"so now as a beginner task, I want to draw",
"has experience with G-code, feel free to share it with",
"with me. I appreciate it :) [![Screenshot of online G-code",
"Referring to a circle shape G-code online generator for my",
"circle. I downloaded the G-code from the website and try",
"\"Screenshot of online G-code generator settings\")](https://i.stack.imgur.com/xfnfS.png \"Screenshot of online G-code",
"in that software. How can I solve this issue? Pardon",
"generator settings\")](https://i.stack.imgur.com/xfnfS.png \"Screenshot of online G-code generator settings\") [![Screenshot of",
"a circle. If anyone has experience with G-code, feel free",
"works well, so now as a beginner task, I want"
] |
[
"3 V2 again because I needed it to print a",
"I am not comfortable with this but I think it",
"limit and, after trying a second time, I saw that",
"help me because I can't print anything and I think",
"multiple problems that I could solve by updating the firmware",
"comfortable with this but I think it comes from the",
"I can't print anything and I think it damages the",
"heard a very hard noise that made me understand that",
"trying a second time, I saw that every axis was",
"it to print a hook. I went through multiple problems",
"after starting the print, I heard a very hard noise",
"have the solution please help me because I can't print",
"because I needed it to print a hook. I went",
"axis was going to +infinite position. I didn't try much",
"motors were going over their limit and, after trying a",
"firmware but after starting the print, I heard a very",
"going over their limit and, after trying a second time,",
"by updating the firmware but after starting the print, I",
"problems that I could solve by updating the firmware but",
"try much things as I am not comfortable with this",
"position. I didn't try much things as I am not",
"print, I heard a very hard noise that made me",
"made me understand that the stepper motors were going over",
"from the firmware. If you have the solution please help",
"that every axis was going to +infinite position. I didn't",
"using my Ender 3 V2 again because I needed it",
"hard noise that made me understand that the stepper motors",
"time, I saw that every axis was going to +infinite",
"very hard noise that made me understand that the stepper",
"went through multiple problems that I could solve by updating",
"updating the firmware but after starting the print, I heard",
"I didn't try much things as I am not comfortable",
"solution please help me because I can't print anything and",
"because I can't print anything and I think it damages",
"think it comes from the firmware. If you have the",
"was going to +infinite position. I didn't try much things",
"again because I needed it to print a hook. I",
"but after starting the print, I heard a very hard",
"print a hook. I went through multiple problems that I",
"every axis was going to +infinite position. I didn't try",
"much things as I am not comfortable with this but",
"I think it comes from the firmware. If you have",
"but I think it comes from the firmware. If you",
"a hook. I went through multiple problems that I could",
"going to +infinite position. I didn't try much things as",
"to print a hook. I went through multiple problems that",
"not comfortable with this but I think it comes from",
"this but I think it comes from the firmware. If",
"I recently started using my Ender 3 V2 again because",
"as I am not comfortable with this but I think",
"firmware. If you have the solution please help me because",
"I could solve by updating the firmware but after starting",
"the firmware. If you have the solution please help me",
"that made me understand that the stepper motors were going",
"started using my Ender 3 V2 again because I needed",
"over their limit and, after trying a second time, I",
"after trying a second time, I saw that every axis",
"with this but I think it comes from the firmware.",
"my Ender 3 V2 again because I needed it to",
"I heard a very hard noise that made me understand",
"that I could solve by updating the firmware but after",
"a second time, I saw that every axis was going",
"to +infinite position. I didn't try much things as I",
"a very hard noise that made me understand that the",
"didn't try much things as I am not comfortable with",
"I needed it to print a hook. I went through",
"hook. I went through multiple problems that I could solve",
"I saw that every axis was going to +infinite position.",
"am not comfortable with this but I think it comes",
"could solve by updating the firmware but after starting the",
"I went through multiple problems that I could solve by",
"noise that made me understand that the stepper motors were",
"V2 again because I needed it to print a hook.",
"me because I can't print anything and I think it",
"If you have the solution please help me because I",
"through multiple problems that I could solve by updating the",
"the firmware but after starting the print, I heard a",
"things as I am not comfortable with this but I",
"comes from the firmware. If you have the solution please",
"can't print anything and I think it damages the printer.",
"starting the print, I heard a very hard noise that",
"+infinite position. I didn't try much things as I am",
"stepper motors were going over their limit and, after trying",
"were going over their limit and, after trying a second",
"their limit and, after trying a second time, I saw",
"recently started using my Ender 3 V2 again because I",
"you have the solution please help me because I can't",
"please help me because I can't print anything and I",
"the solution please help me because I can't print anything",
"and, after trying a second time, I saw that every",
"solve by updating the firmware but after starting the print,",
"the stepper motors were going over their limit and, after",
"saw that every axis was going to +infinite position. I",
"needed it to print a hook. I went through multiple",
"it comes from the firmware. If you have the solution",
"me understand that the stepper motors were going over their",
"understand that the stepper motors were going over their limit",
"Ender 3 V2 again because I needed it to print",
"the print, I heard a very hard noise that made",
"that the stepper motors were going over their limit and,",
"second time, I saw that every axis was going to"
] |
[
"heard that it is possible, but I can’t find this",
"I heard that it is possible, but I can’t find",
"PrusaSlicer or Cura? I heard that it is possible, but",
"or Cura? I heard that it is possible, but I",
"in PrusaSlicer or Cura? I heard that it is possible,",
"it is possible, but I can’t find this option in",
"Cura? I heard that it is possible, but I can’t",
"that it is possible, but I can’t find this option",
"use organic supports in PrusaSlicer or Cura? I heard that",
"organic supports in PrusaSlicer or Cura? I heard that it",
"supports in PrusaSlicer or Cura? I heard that it is",
"is possible, but I can’t find this option in these",
"to use organic supports in PrusaSlicer or Cura? I heard",
"How to use organic supports in PrusaSlicer or Cura? I",
"possible, but I can’t find this option in these slicers."
] |
[
"was in a hurry and set a print running before",
"sock](https://i.stack.imgur.com/ywdFK.jpg \"Photo of a large mass of filament sticking out",
"silicone sock\")](https://i.stack.imgur.com/ywdFK.jpg \"Photo of a large mass of filament sticking",
"showing filament and residue](https://i.stack.imgur.com/YjQec.jpg \"Photo of the printer head from",
"filament sticking out of a silicone sock\")](https://i.stack.imgur.com/ywdFK.jpg \"Photo of a",
"of a silicone sock](https://i.stack.imgur.com/ywdFK.jpg \"Photo of a large mass of",
"for about 8 hours; came home to a great enormous",
"showing filament and residue\")](https://i.stack.imgur.com/YjQec.jpg \"Photo of the printer head from",
"print running before leaving it unattended for about 8 hours;",
"more importantly, is anything here salvageable, or do I just",
"in a hurry and set a print running before leaving",
"sock\") [![Photo of the printer head from below showing filament",
"critical error was, I was in a hurry and set",
"a print running before leaving it unattended for about 8",
"sticking out of a silicone sock](https://i.stack.imgur.com/ywdFK.jpg \"Photo of a large",
"residue\") What on earth happened? Perhaps more importantly, is anything",
"of the printer head from below showing filament and residue](https://i.stack.imgur.com/YjQec.jpg",
"out of a silicone sock\") [![Photo of the printer head",
"below showing filament and residue](https://i.stack.imgur.com/YjQec.jpg \"Photo of the printer head",
"was, I was in a hurry and set a print",
"filament and residue\") What on earth happened? Perhaps more importantly,",
"sticking out of a silicone sock\") [![Photo of the printer",
"large mass of filament sticking out of a silicone sock\")](https://i.stack.imgur.com/ywdFK.jpg",
"from below showing filament and residue\")](https://i.stack.imgur.com/YjQec.jpg \"Photo of the printer",
"and set a print running before leaving it unattended for",
"of a silicone sock\") [![Photo of the printer head from",
"before leaving it unattended for about 8 hours; came home",
"know what my critical error was, I was in a",
"head from below showing filament and residue\") What on earth",
"the printer head from below showing filament and residue\")](https://i.stack.imgur.com/YjQec.jpg \"Photo",
"head from below showing filament and residue\")](https://i.stack.imgur.com/YjQec.jpg \"Photo of the",
"mass of filament sticking out of a silicone sock\")](https://i.stack.imgur.com/ywdFK.jpg \"Photo",
"importantly, is anything here salvageable, or do I just need",
"silicone sock](https://i.stack.imgur.com/ywdFK.jpg \"Photo of a large mass of filament sticking",
"sticking out of a silicone sock\")](https://i.stack.imgur.com/ywdFK.jpg \"Photo of a large",
"filament sticking out of a silicone sock\") [![Photo of the",
"and residue\")](https://i.stack.imgur.com/YjQec.jpg \"Photo of the printer head from below showing",
"8 hours; came home to a great enormous disaster. [![Photo",
"of filament sticking out of a silicone sock\") [![Photo of",
"on earth happened? Perhaps more importantly, is anything here salvageable,",
"Perhaps more importantly, is anything here salvageable, or do I",
"earth happened? Perhaps more importantly, is anything here salvageable, or",
"filament sticking out of a silicone sock](https://i.stack.imgur.com/ywdFK.jpg \"Photo of a",
"here salvageable, or do I just need to get a",
"from below showing filament and residue\") What on earth happened?",
"my critical error was, I was in a hurry and",
"Well, I know what my critical error was, I was",
"it unattended for about 8 hours; came home to a",
"[![Photo of the printer head from below showing filament and",
"[![Photo of a large mass of filament sticking out of",
"of a large mass of filament sticking out of a",
"below showing filament and residue\") What on earth happened? Perhaps",
"showing filament and residue\") What on earth happened? Perhaps more",
"I was in a hurry and set a print running",
"hurry and set a print running before leaving it unattended",
"to a great enormous disaster. [![Photo of a large mass",
"and residue\") What on earth happened? Perhaps more importantly, is",
"set a print running before leaving it unattended for about",
"of filament sticking out of a silicone sock\")](https://i.stack.imgur.com/ywdFK.jpg \"Photo of",
"unattended for about 8 hours; came home to a great",
"great enormous disaster. [![Photo of a large mass of filament",
"\"Photo of the printer head from below showing filament and",
"silicone sock\") [![Photo of the printer head from below showing",
"a great enormous disaster. [![Photo of a large mass of",
"printer head from below showing filament and residue\") What on",
"residue](https://i.stack.imgur.com/YjQec.jpg \"Photo of the printer head from below showing filament",
"running before leaving it unattended for about 8 hours; came",
"of the printer head from below showing filament and residue\")](https://i.stack.imgur.com/YjQec.jpg",
"What on earth happened? Perhaps more importantly, is anything here",
"residue\")](https://i.stack.imgur.com/YjQec.jpg \"Photo of the printer head from below showing filament",
"of a silicone sock\")](https://i.stack.imgur.com/ywdFK.jpg \"Photo of a large mass of",
"salvageable, or do I just need to get a new",
"printer head from below showing filament and residue](https://i.stack.imgur.com/YjQec.jpg \"Photo of",
"about 8 hours; came home to a great enormous disaster.",
"error was, I was in a hurry and set a",
"large mass of filament sticking out of a silicone sock\")",
"leaving it unattended for about 8 hours; came home to",
"of filament sticking out of a silicone sock](https://i.stack.imgur.com/ywdFK.jpg \"Photo of",
"a silicone sock\") [![Photo of the printer head from below",
"is anything here salvageable, or do I just need to",
"sock\")](https://i.stack.imgur.com/ywdFK.jpg \"Photo of a large mass of filament sticking out",
"filament and residue](https://i.stack.imgur.com/YjQec.jpg \"Photo of the printer head from below",
"anything here salvageable, or do I just need to get",
"disaster. [![Photo of a large mass of filament sticking out",
"out of a silicone sock\")](https://i.stack.imgur.com/ywdFK.jpg \"Photo of a large mass",
"or do I just need to get a new printhead?",
"mass of filament sticking out of a silicone sock\") [![Photo",
"below showing filament and residue\")](https://i.stack.imgur.com/YjQec.jpg \"Photo of the printer head",
"came home to a great enormous disaster. [![Photo of a",
"the printer head from below showing filament and residue\") What",
"a large mass of filament sticking out of a silicone",
"a hurry and set a print running before leaving it",
"printer head from below showing filament and residue\")](https://i.stack.imgur.com/YjQec.jpg \"Photo of",
"head from below showing filament and residue](https://i.stack.imgur.com/YjQec.jpg \"Photo of the",
"happened? Perhaps more importantly, is anything here salvageable, or do",
"I know what my critical error was, I was in",
"the printer head from below showing filament and residue](https://i.stack.imgur.com/YjQec.jpg \"Photo",
"from below showing filament and residue](https://i.stack.imgur.com/YjQec.jpg \"Photo of the printer",
"filament and residue\")](https://i.stack.imgur.com/YjQec.jpg \"Photo of the printer head from below",
"out of a silicone sock](https://i.stack.imgur.com/ywdFK.jpg \"Photo of a large mass",
"hours; came home to a great enormous disaster. [![Photo of",
"and residue](https://i.stack.imgur.com/YjQec.jpg \"Photo of the printer head from below showing",
"what my critical error was, I was in a hurry",
"a silicone sock\")](https://i.stack.imgur.com/ywdFK.jpg \"Photo of a large mass of filament",
"home to a great enormous disaster. [![Photo of a large",
"a silicone sock](https://i.stack.imgur.com/ywdFK.jpg \"Photo of a large mass of filament",
"enormous disaster. [![Photo of a large mass of filament sticking",
"of the printer head from below showing filament and residue\")",
"\"Photo of a large mass of filament sticking out of",
"large mass of filament sticking out of a silicone sock](https://i.stack.imgur.com/ywdFK.jpg",
"mass of filament sticking out of a silicone sock](https://i.stack.imgur.com/ywdFK.jpg \"Photo"
] |
[
"cannot get the CR Touch correctly calibrated, but it is",
"to try out for it to work well? Also, I´m",
"but it is correctly installed (physically) and recognized in firmware.",
"which took a while and was finally completed following this",
"By default it takes 9 measurements and the first 6",
"does a correct measurement from the center of the bed",
"the 3D printing world and after installing Marlin 2.1.2 firmware",
"measurements of the bed? Just for it to be more",
"of the bed? Just for it to be more accurate",
"The steps I´m following are: * Auto-homing. Which does a",
"bed. Also, is there a way to make it work",
"the first 6 are okay, but for the 7th the",
"Which does a correct measurement from the center of the",
"firmware. The steps I´m following are: * Auto-homing. Which does",
"in firmware. The steps I´m following are: * Auto-homing. Which",
"for it to work well? Also, I´m using OctoPrint for",
"9 measurements and the first 6 are okay, but for",
"far. * Bed leveling. By default it takes 9 measurements",
"mm instead of the -1.x mm or even -2 mm",
"instead of the -1.x mm or even -2 mm some",
"following are: * Auto-homing. Which does a correct measurement from",
"first 6 are okay, but for the 7th the nozzle",
"accurate and know more the bed it is working on.",
"the CR Touch correctly calibrated, but it is correctly installed",
"to make it work taking more measurements of the bed?",
"or there is a known plugin I can work with.",
"I´m new in this but I have seen many videos",
"I got 0.1 mm instead of the -1.x mm or",
"mm or even -2 mm some people are getting in",
"a way to make it work taking more measurements of",
"and know more the bed it is working on. Once",
"them. Is there anything to try out for it to",
"world and after installing Marlin 2.1.2 firmware in my Ender",
"tutorial: I cannot get the CR Touch correctly calibrated, but",
"Marlin 2.1.2 firmware in my Ender 3, which took a",
"is there a way to make it work taking more",
"using OctoPrint for it, in case this helps or there",
"people are getting in some tutorials I´ve seen so far.",
"took a while and was finally completed following this tutorial:",
"correctly installed (physically) and recognized in firmware. The steps I´m",
"bed it is working on. Once again, I´m new in",
"Z Offset. Which is strange because I got 0.1 mm",
"measurements and the first 6 are okay, but for the",
"center of the bed using CR Touch. * Probing the",
"glass bed. Also, is there a way to make it",
"I cannot get the CR Touch correctly calibrated, but it",
"new in this but I have seen many videos about",
"installing Marlin 2.1.2 firmware in my Ender 3, which took",
"the bed? Just for it to be more accurate and",
"for it to be more accurate and know more the",
"even -2 mm some people are getting in some tutorials",
"strange because I got 0.1 mm instead of the -1.x",
"know more the bed it is working on. Once again,",
"calibrated, but it is correctly installed (physically) and recognized in",
"Touch goes to low and pushes against the glass bed.",
"but for the 7th the nozzle along with the CR",
"against the glass bed. Also, is there a way to",
"came to the 3D printing world and after installing Marlin",
"the Z Offset. Which is strange because I got 0.1",
"Offset. Which is strange because I got 0.1 mm instead",
"* Bed leveling. By default it takes 9 measurements and",
"out for it to work well? Also, I´m using OctoPrint",
"Bed leveling. By default it takes 9 measurements and the",
"have seen many videos about it, not getting a valid",
"got 0.1 mm instead of the -1.x mm or even",
"-1.x mm or even -2 mm some people are getting",
"bed? Just for it to be more accurate and know",
"in this but I have seen many videos about it,",
"it is correctly installed (physically) and recognized in firmware. The",
"a while and was finally completed following this tutorial: I",
"Once again, I´m new in this but I have seen",
"* Probing the Z Offset. Which is strange because I",
"is strange because I got 0.1 mm instead of the",
"0.1 mm instead of the -1.x mm or even -2",
"steps I´m following are: * Auto-homing. Which does a correct",
"in some tutorials I´ve seen so far. * Bed leveling.",
"Touch correctly calibrated, but it is correctly installed (physically) and",
"work well? Also, I´m using OctoPrint for it, in case",
"along with the CR Touch goes to low and pushes",
"in my Ender 3, which took a while and was",
"because I got 0.1 mm instead of the -1.x mm",
"are okay, but for the 7th the nozzle along with",
"the glass bed. Also, is there a way to make",
"this tutorial: I cannot get the CR Touch correctly calibrated,",
"more measurements of the bed? Just for it to be",
"the nozzle along with the CR Touch goes to low",
"be more accurate and know more the bed it is",
"there anything to try out for it to work well?",
"printing world and after installing Marlin 2.1.2 firmware in my",
"default it takes 9 measurements and the first 6 are",
"following this tutorial: I cannot get the CR Touch correctly",
"of the -1.x mm or even -2 mm some people",
"okay, but for the 7th the nozzle along with the",
"was finally completed following this tutorial: I cannot get the",
"some tutorials I´ve seen so far. * Bed leveling. By",
"tutorials I´ve seen so far. * Bed leveling. By default",
"6 are okay, but for the 7th the nozzle along",
"correctly calibrated, but it is correctly installed (physically) and recognized",
"nozzle along with the CR Touch goes to low and",
"a valid configuration in any of them. Is there anything",
"for it, in case this helps or there is a",
"recognized in firmware. The steps I´m following are: * Auto-homing.",
"the 7th the nozzle along with the CR Touch goes",
"configuration in any of them. Is there anything to try",
"CR Touch correctly calibrated, but it is correctly installed (physically)",
"measurement from the center of the bed using CR Touch.",
"many videos about it, not getting a valid configuration in",
"* Auto-homing. Which does a correct measurement from the center",
"some people are getting in some tutorials I´ve seen so",
"and after installing Marlin 2.1.2 firmware in my Ender 3,",
"Also, is there a way to make it work taking",
"seen so far. * Bed leveling. By default it takes",
"I´ve seen so far. * Bed leveling. By default it",
"correct measurement from the center of the bed using CR",
"Is there anything to try out for it to work",
"my Ender 3, which took a while and was finally",
"of the bed using CR Touch. * Probing the Z",
"takes 9 measurements and the first 6 are okay, but",
"are getting in some tutorials I´ve seen so far. *",
"in any of them. Is there anything to try out",
"it takes 9 measurements and the first 6 are okay,",
"the -1.x mm or even -2 mm some people are",
"bed using CR Touch. * Probing the Z Offset. Which",
"seen many videos about it, not getting a valid configuration",
"it, in case this helps or there is a known",
"I´m using OctoPrint for it, in case this helps or",
"Ender 3, which took a while and was finally completed",
"from the center of the bed using CR Touch. *",
"so far. * Bed leveling. By default it takes 9",
"it work taking more measurements of the bed? Just for",
"taking more measurements of the bed? Just for it to",
"getting a valid configuration in any of them. Is there",
"this but I have seen many videos about it, not",
"CR Touch. * Probing the Z Offset. Which is strange",
"leveling. By default it takes 9 measurements and the first",
"getting in some tutorials I´ve seen so far. * Bed",
"anything to try out for it to work well? Also,",
"case this helps or there is a known plugin I",
"it to work well? Also, I´m using OctoPrint for it,",
"helps or there is a known plugin I can work",
"work taking more measurements of the bed? Just for it",
"3D printing world and after installing Marlin 2.1.2 firmware in",
"Just came to the 3D printing world and after installing",
"goes to low and pushes against the glass bed. Also,",
"low and pushes against the glass bed. Also, is there",
"it is working on. Once again, I´m new in this",
"Just for it to be more accurate and know more",
"this helps or there is a known plugin I can",
"about it, not getting a valid configuration in any of",
"CR Touch goes to low and pushes against the glass",
"are: * Auto-homing. Which does a correct measurement from the",
"finally completed following this tutorial: I cannot get the CR",
"any of them. Is there anything to try out for",
"again, I´m new in this but I have seen many",
"is working on. Once again, I´m new in this but",
"valid configuration in any of them. Is there anything to",
"OctoPrint for it, in case this helps or there is",
"videos about it, not getting a valid configuration in any",
"or even -2 mm some people are getting in some",
"a correct measurement from the center of the bed using",
"it to be more accurate and know more the bed",
"there a way to make it work taking more measurements",
"installed (physically) and recognized in firmware. The steps I´m following",
"try out for it to work well? Also, I´m using",
"firmware in my Ender 3, which took a while and",
"to the 3D printing world and after installing Marlin 2.1.2",
"of them. Is there anything to try out for it",
"the bed it is working on. Once again, I´m new",
"and pushes against the glass bed. Also, is there a",
"-2 mm some people are getting in some tutorials I´ve",
"the CR Touch goes to low and pushes against the",
"while and was finally completed following this tutorial: I cannot",
"2.1.2 firmware in my Ender 3, which took a while",
"7th the nozzle along with the CR Touch goes to",
"to be more accurate and know more the bed it",
"I have seen many videos about it, not getting a",
"it, not getting a valid configuration in any of them.",
"3, which took a while and was finally completed following",
"is correctly installed (physically) and recognized in firmware. The steps",
"well? Also, I´m using OctoPrint for it, in case this",
"using CR Touch. * Probing the Z Offset. Which is",
"and recognized in firmware. The steps I´m following are: *",
"with the CR Touch goes to low and pushes against",
"mm some people are getting in some tutorials I´ve seen",
"and was finally completed following this tutorial: I cannot get",
"make it work taking more measurements of the bed? Just",
"more the bed it is working on. Once again, I´m",
"but I have seen many videos about it, not getting",
"Touch. * Probing the Z Offset. Which is strange because",
"on. Once again, I´m new in this but I have",
"get the CR Touch correctly calibrated, but it is correctly",
"the bed using CR Touch. * Probing the Z Offset.",
"completed following this tutorial: I cannot get the CR Touch",
"to low and pushes against the glass bed. Also, is",
"way to make it work taking more measurements of the",
"more accurate and know more the bed it is working",
"I´m following are: * Auto-homing. Which does a correct measurement",
"not getting a valid configuration in any of them. Is",
"after installing Marlin 2.1.2 firmware in my Ender 3, which",
"working on. Once again, I´m new in this but I",
"in case this helps or there is a known plugin",
"pushes against the glass bed. Also, is there a way",
"Which is strange because I got 0.1 mm instead of",
"(physically) and recognized in firmware. The steps I´m following are:",
"the center of the bed using CR Touch. * Probing",
"Also, I´m using OctoPrint for it, in case this helps",
"Auto-homing. Which does a correct measurement from the center of",
"and the first 6 are okay, but for the 7th",
"to work well? Also, I´m using OctoPrint for it, in",
"Probing the Z Offset. Which is strange because I got",
"for the 7th the nozzle along with the CR Touch"
] |
[
"which is at 0.2 mm now. I have double-checked belt",
"I have just finished assembling my Prosi i3 a few",
"coming out with a bunch of rough lines on the",
"just finished assembling my Prosi i3 a few days ago.",
"out](https://i.stack.imgur.com/rYuWe.jpg \"Test print of an SD card bear holder, layer",
"around 267 pretty consistently. I did try loosening it a",
"new to 3D-printing, and I have just finished assembling my",
"it seems to check out with the guides. I would",
"tensioning the belts\")](https://i.stack.imgur.com/c46X2.jpg \"Calibration cube printed after tensioning the belts\")",
"I have messed with layer height, which is at 0.2",
"double-checked belt tensions and messed around with it, but the",
"consistently. I did try loosening it a lot more, but",
"try right now. I have messed with layer height, which",
"around with it, but the belt status seems to be",
"fine, but noticed my prints were coming out with a",
"[![calibration cube](https://i.stack.imgur.com/c46X2.jpg \"Calibration cube printed after tensioning the belts\")](https://i.stack.imgur.com/c46X2.jpg \"Calibration",
"lot more, but got the around the same, ~270 at",
"around the same, ~270 at max, even when extremely loose.",
"be sticking out\") Calibration cube printed after tensioning the belts:",
"with layer height, which is at 0.2 mm now. I",
"belts: [![calibration cube](https://i.stack.imgur.com/c46X2.jpg \"Calibration cube printed after tensioning the belts\")](https://i.stack.imgur.com/c46X2.jpg",
"did try loosening it a lot more, but got the",
"noticed my prints were coming out with a bunch of",
"at max, even when extremely loose. Not sure what the",
"to be sticking out](https://i.stack.imgur.com/rYuWe.jpg \"Test print of an SD card",
"pretty consistently. I did try loosening it a lot more,",
"a bunch of rough lines on the sides. I looked",
"layer lines seem to be sticking out\") Calibration cube printed",
"~270 at max, even when extremely loose. Not sure what",
"0.2 mm now. I have double-checked belt tensions and messed",
"and I have just finished assembling my Prosi i3 a",
"max, even when extremely loose. Not sure what the belt",
"with it, but the belt status seems to be hovering",
"went fine, but noticed my prints were coming out with",
"about adjusting flow rate, so I took that down from",
"not really sure what else to try right now. I",
"got the around the same, ~270 at max, even when",
"be hovering around 267 pretty consistently. I did try loosening",
"with the guides. I would appreciate any help or advice.",
"seem to be sticking out\")](https://i.stack.imgur.com/rYuWe.jpg \"Test print of an SD",
"a few days ago. I finished up basic calibrations, which",
"out with a bunch of rough lines on the sides.",
"out with the guides. I would appreciate any help or",
"lines seem to be sticking out\")](https://i.stack.imgur.com/rYuWe.jpg \"Test print of an",
"the sides. I looked online, and saw some things about",
"basic calibrations, which went fine, but noticed my prints were",
"the around the same, ~270 at max, even when extremely",
"try loosening it a lot more, but got the around",
"sure what else to try right now. I have messed",
"SD card bear holder, layer lines seem to be sticking",
"have just finished assembling my Prosi i3 a few days",
"when extremely loose. Not sure what the belt tension should",
"sure what the belt tension should be feeling like, but",
"else to try right now. I have messed with layer",
"of rough lines on the sides. I looked online, and",
"to 90. I am not really sure what else to",
"seems to check out with the guides. I would appreciate",
"cube printed after tensioning the belts\")](https://i.stack.imgur.com/c46X2.jpg \"Calibration cube printed after",
"mm now. I have double-checked belt tensions and messed around",
"card bear holder, layer lines seem to be sticking out\")](https://i.stack.imgur.com/rYuWe.jpg",
"to try right now. I have messed with layer height,",
"90. I am not really sure what else to try",
"hovering around 267 pretty consistently. I did try loosening it",
"I looked online, and saw some things about adjusting flow",
"holder, layer lines seem to be sticking out](https://i.stack.imgur.com/rYuWe.jpg \"Test print",
"my prints were coming out with a bunch of rough",
"cube](https://i.stack.imgur.com/c46X2.jpg \"Calibration cube printed after tensioning the belts\")](https://i.stack.imgur.com/c46X2.jpg \"Calibration cube",
"I have double-checked belt tensions and messed around with it,",
"any help or advice. [![Test print of an SD card",
"the same, ~270 at max, even when extremely loose. Not",
"holder, layer lines seem to be sticking out\")](https://i.stack.imgur.com/rYuWe.jpg \"Test print",
"things about adjusting flow rate, so I took that down",
"feeling like, but it seems to check out with the",
"would appreciate any help or advice. [![Test print of an",
"to check out with the guides. I would appreciate any",
"printed after tensioning the belts: [![calibration cube](https://i.stack.imgur.com/c46X2.jpg \"Calibration cube printed",
"be sticking out](https://i.stack.imgur.com/rYuWe.jpg \"Test print of an SD card bear",
"to be sticking out\") Calibration cube printed after tensioning the",
"I am pretty new to 3D-printing, and I have just",
"bear holder, layer lines seem to be sticking out\") Calibration",
"layer height, which is at 0.2 mm now. I have",
"should be feeling like, but it seems to check out",
"I did try loosening it a lot more, but got",
"belt status seems to be hovering around 267 pretty consistently.",
"finished up basic calibrations, which went fine, but noticed my",
"ago. I finished up basic calibrations, which went fine, but",
"I took that down from 95 to 90. I am",
"belt tensions and messed around with it, but the belt",
"calibrations, which went fine, but noticed my prints were coming",
"extremely loose. Not sure what the belt tension should be",
"really sure what else to try right now. I have",
"finished assembling my Prosi i3 a few days ago. I",
"i3 a few days ago. I finished up basic calibrations,",
"loosening it a lot more, but got the around the",
"am not really sure what else to try right now.",
"days ago. I finished up basic calibrations, which went fine,",
"sticking out](https://i.stack.imgur.com/rYuWe.jpg \"Test print of an SD card bear holder,",
"from 95 to 90. I am not really sure what",
"have messed with layer height, which is at 0.2 mm",
"now. I have messed with layer height, which is at",
"guides. I would appreciate any help or advice. [![Test print",
"after tensioning the belts: [![calibration cube](https://i.stack.imgur.com/c46X2.jpg \"Calibration cube printed after",
"flow rate, so I took that down from 95 to",
"seem to be sticking out\") Calibration cube printed after tensioning",
"rough lines on the sides. I looked online, and saw",
"some things about adjusting flow rate, so I took that",
"but noticed my prints were coming out with a bunch",
"messed with layer height, which is at 0.2 mm now.",
"it a lot more, but got the around the same,",
"few days ago. I finished up basic calibrations, which went",
"adjusting flow rate, so I took that down from 95",
"lines on the sides. I looked online, and saw some",
"so I took that down from 95 to 90. I",
"same, ~270 at max, even when extremely loose. Not sure",
"tensioning the belts: [![calibration cube](https://i.stack.imgur.com/c46X2.jpg \"Calibration cube printed after tensioning",
"were coming out with a bunch of rough lines on",
"to be hovering around 267 pretty consistently. I did try",
"layer lines seem to be sticking out\")](https://i.stack.imgur.com/rYuWe.jpg \"Test print of",
"bunch of rough lines on the sides. I looked online,",
"print of an SD card bear holder, layer lines seem",
"be sticking out\")](https://i.stack.imgur.com/rYuWe.jpg \"Test print of an SD card bear",
"my Prosi i3 a few days ago. I finished up",
"even when extremely loose. Not sure what the belt tension",
"online, and saw some things about adjusting flow rate, so",
"and messed around with it, but the belt status seems",
"more, but got the around the same, ~270 at max,",
"but it seems to check out with the guides. I",
"what else to try right now. I have messed with",
"bear holder, layer lines seem to be sticking out\")](https://i.stack.imgur.com/rYuWe.jpg \"Test",
"on the sides. I looked online, and saw some things",
"saw some things about adjusting flow rate, so I took",
"check out with the guides. I would appreciate any help",
"bear holder, layer lines seem to be sticking out](https://i.stack.imgur.com/rYuWe.jpg \"Test",
"a lot more, but got the around the same, ~270",
"\"Calibration cube printed after tensioning the belts\")](https://i.stack.imgur.com/c46X2.jpg \"Calibration cube printed",
"which went fine, but noticed my prints were coming out",
"the guides. I would appreciate any help or advice. [![Test",
"appreciate any help or advice. [![Test print of an SD",
"after tensioning the belts\")](https://i.stack.imgur.com/c46X2.jpg \"Calibration cube printed after tensioning the",
"height, which is at 0.2 mm now. I have double-checked",
"now. I have double-checked belt tensions and messed around with",
"with a bunch of rough lines on the sides. I",
"messed around with it, but the belt status seems to",
"an SD card bear holder, layer lines seem to be",
"to 3D-printing, and I have just finished assembling my Prosi",
"is at 0.2 mm now. I have double-checked belt tensions",
"\"Test print of an SD card bear holder, layer lines",
"right now. I have messed with layer height, which is",
"it, but the belt status seems to be hovering around",
"but the belt status seems to be hovering around 267",
"seem to be sticking out](https://i.stack.imgur.com/rYuWe.jpg \"Test print of an SD",
"belt tension should be feeling like, but it seems to",
"like, but it seems to check out with the guides.",
"at 0.2 mm now. I have double-checked belt tensions and",
"advice. [![Test print of an SD card bear holder, layer",
"prints were coming out with a bunch of rough lines",
"assembling my Prosi i3 a few days ago. I finished",
"the belt tension should be feeling like, but it seems",
"seems to be hovering around 267 pretty consistently. I did",
"Prosi i3 a few days ago. I finished up basic",
"have double-checked belt tensions and messed around with it, but",
"to be sticking out\")](https://i.stack.imgur.com/rYuWe.jpg \"Test print of an SD card",
"pretty new to 3D-printing, and I have just finished assembling",
"but got the around the same, ~270 at max, even",
"I finished up basic calibrations, which went fine, but noticed",
"loose. Not sure what the belt tension should be feeling",
"looked online, and saw some things about adjusting flow rate,",
"took that down from 95 to 90. I am not",
"that down from 95 to 90. I am not really",
"status seems to be hovering around 267 pretty consistently. I",
"of an SD card bear holder, layer lines seem to",
"sticking out\")](https://i.stack.imgur.com/rYuWe.jpg \"Test print of an SD card bear holder,",
"out\")](https://i.stack.imgur.com/rYuWe.jpg \"Test print of an SD card bear holder, layer",
"rate, so I took that down from 95 to 90.",
"holder, layer lines seem to be sticking out\") Calibration cube",
"down from 95 to 90. I am not really sure",
"and saw some things about adjusting flow rate, so I",
"am pretty new to 3D-printing, and I have just finished",
"Not sure what the belt tension should be feeling like,",
"lines seem to be sticking out](https://i.stack.imgur.com/rYuWe.jpg \"Test print of an",
"Calibration cube printed after tensioning the belts: [![calibration cube](https://i.stack.imgur.com/c46X2.jpg \"Calibration",
"sticking out\") Calibration cube printed after tensioning the belts: [![calibration",
"card bear holder, layer lines seem to be sticking out\")",
"help or advice. [![Test print of an SD card bear",
"95 to 90. I am not really sure what else",
"or advice. [![Test print of an SD card bear holder,",
"up basic calibrations, which went fine, but noticed my prints",
"I would appreciate any help or advice. [![Test print of",
"printed after tensioning the belts\")](https://i.stack.imgur.com/c46X2.jpg \"Calibration cube printed after tensioning",
"267 pretty consistently. I did try loosening it a lot",
"be feeling like, but it seems to check out with",
"3D-printing, and I have just finished assembling my Prosi i3",
"tensions and messed around with it, but the belt status",
"card bear holder, layer lines seem to be sticking out](https://i.stack.imgur.com/rYuWe.jpg",
"cube printed after tensioning the belts: [![calibration cube](https://i.stack.imgur.com/c46X2.jpg \"Calibration cube",
"the belts: [![calibration cube](https://i.stack.imgur.com/c46X2.jpg \"Calibration cube printed after tensioning the",
"[![Test print of an SD card bear holder, layer lines",
"what the belt tension should be feeling like, but it",
"layer lines seem to be sticking out](https://i.stack.imgur.com/rYuWe.jpg \"Test print of",
"the belt status seems to be hovering around 267 pretty",
"tension should be feeling like, but it seems to check",
"I am not really sure what else to try right",
"lines seem to be sticking out\") Calibration cube printed after",
"out\") Calibration cube printed after tensioning the belts: [![calibration cube](https://i.stack.imgur.com/c46X2.jpg",
"sides. I looked online, and saw some things about adjusting"
] |
[
"just finished assembling my Ender 3 Pro and am having",
"doesn't even come close to the bed, the z-limit stops",
"specific assembly step to see if I assembled it incorrectly",
"Pro and am having trouble with bed leveling. The extruder",
"the gap? Should I be checking for a specific assembly",
"for a specific assembly step to see if I assembled",
"gap? Should I be checking for a specific assembly step",
"stops the nozzle about 3-4 mm away. [![Extruder and bed",
"any way to decrease the gap? Should I be checking",
"even come close to the bed, the z-limit stops the",
"my Ender 3 Pro and am having trouble with bed",
"gap](https://i.stack.imgur.com/CHT5B.jpg \"Extruder and bed gap\")](https://i.stack.imgur.com/CHT5B.jpg \"Extruder and bed gap\") The",
"bed, the z-limit stops the nozzle about 3-4 mm away.",
"I just finished assembling my Ender 3 Pro and am",
"and bed gap](https://i.stack.imgur.com/CHT5B.jpg \"Extruder and bed gap\")](https://i.stack.imgur.com/CHT5B.jpg \"Extruder and bed",
"a specific assembly step to see if I assembled it",
"the nozzle about 3-4 mm away. [![Extruder and bed gap](https://i.stack.imgur.com/CHT5B.jpg",
"bed leveling. The extruder doesn't even come close to the",
"3 Pro and am having trouble with bed leveling. The",
"nozzle about 3-4 mm away. [![Extruder and bed gap](https://i.stack.imgur.com/CHT5B.jpg \"Extruder",
"I be checking for a specific assembly step to see",
"bed gap\") The leveling springs are already pretty uncompressed. Is",
"am having trouble with bed leveling. The extruder doesn't even",
"leveling springs are already pretty uncompressed. Is there any way",
"come close to the bed, the z-limit stops the nozzle",
"trouble with bed leveling. The extruder doesn't even come close",
"3-4 mm away. [![Extruder and bed gap](https://i.stack.imgur.com/CHT5B.jpg \"Extruder and bed",
"decrease the gap? Should I be checking for a specific",
"and am having trouble with bed leveling. The extruder doesn't",
"about 3-4 mm away. [![Extruder and bed gap](https://i.stack.imgur.com/CHT5B.jpg \"Extruder and",
"The leveling springs are already pretty uncompressed. Is there any",
"leveling. The extruder doesn't even come close to the bed,",
"Is there any way to decrease the gap? Should I",
"to decrease the gap? Should I be checking for a",
"the z-limit stops the nozzle about 3-4 mm away. [![Extruder",
"Ender 3 Pro and am having trouble with bed leveling.",
"finished assembling my Ender 3 Pro and am having trouble",
"mm away. [![Extruder and bed gap](https://i.stack.imgur.com/CHT5B.jpg \"Extruder and bed gap\")](https://i.stack.imgur.com/CHT5B.jpg",
"there any way to decrease the gap? Should I be",
"the bed, the z-limit stops the nozzle about 3-4 mm",
"\"Extruder and bed gap\")](https://i.stack.imgur.com/CHT5B.jpg \"Extruder and bed gap\") The leveling",
"springs are already pretty uncompressed. Is there any way to",
"gap\") The leveling springs are already pretty uncompressed. Is there",
"be checking for a specific assembly step to see if",
"Should I be checking for a specific assembly step to",
"having trouble with bed leveling. The extruder doesn't even come",
"[![Extruder and bed gap](https://i.stack.imgur.com/CHT5B.jpg \"Extruder and bed gap\")](https://i.stack.imgur.com/CHT5B.jpg \"Extruder and",
"to the bed, the z-limit stops the nozzle about 3-4",
"already pretty uncompressed. Is there any way to decrease the",
"The extruder doesn't even come close to the bed, the",
"z-limit stops the nozzle about 3-4 mm away. [![Extruder and",
"assembly step to see if I assembled it incorrectly somewhere?",
"bed gap\")](https://i.stack.imgur.com/CHT5B.jpg \"Extruder and bed gap\") The leveling springs are",
"assembling my Ender 3 Pro and am having trouble with",
"are already pretty uncompressed. Is there any way to decrease",
"extruder doesn't even come close to the bed, the z-limit",
"gap\")](https://i.stack.imgur.com/CHT5B.jpg \"Extruder and bed gap\") The leveling springs are already",
"bed gap](https://i.stack.imgur.com/CHT5B.jpg \"Extruder and bed gap\")](https://i.stack.imgur.com/CHT5B.jpg \"Extruder and bed gap\")",
"uncompressed. Is there any way to decrease the gap? Should",
"way to decrease the gap? Should I be checking for",
"with bed leveling. The extruder doesn't even come close to",
"checking for a specific assembly step to see if I",
"\"Extruder and bed gap\") The leveling springs are already pretty",
"pretty uncompressed. Is there any way to decrease the gap?",
"close to the bed, the z-limit stops the nozzle about",
"and bed gap\")](https://i.stack.imgur.com/CHT5B.jpg \"Extruder and bed gap\") The leveling springs",
"away. [![Extruder and bed gap](https://i.stack.imgur.com/CHT5B.jpg \"Extruder and bed gap\")](https://i.stack.imgur.com/CHT5B.jpg \"Extruder",
"and bed gap\") The leveling springs are already pretty uncompressed."
] |
[
"model on Thingiverse that is useful for my project, a",
"printing STL files that are shared online and/or expected by",
"important. Eyeballing, it seems that each STL unit corresponds to",
"is useful for my project, a connector that must fit",
"that are shared online and/or expected by 3-D printers? I",
"STL files that are shared online and/or expected by 3-D",
"3-D printers? I found a model on Thingiverse that is",
"that is useful for my project, a connector that must",
"of the 3D printing STL files that are shared online",
"Eyeballing, it seems that each STL unit corresponds to 1",
"online and/or expected by 3-D printers? I found a model",
"for the scale of the 3D printing STL files that",
"it seems that each STL unit corresponds to 1 millimeter,",
"found a model on Thingiverse that is useful for my",
"the 3D printing STL files that are shared online and/or",
"a convention for the scale of the 3D printing STL",
"3D printing STL files that are shared online and/or expected",
"is important. Eyeballing, it seems that each STL unit corresponds",
"shared online and/or expected by 3-D printers? I found a",
"a connector that must fit with other parts, so precision",
"a model on Thingiverse that is useful for my project,",
"each STL unit corresponds to 1 millimeter, is this a",
"that each STL unit corresponds to 1 millimeter, is this",
"the scale of the 3D printing STL files that are",
"precision is important. Eyeballing, it seems that each STL unit",
"useful for my project, a connector that must fit with",
"unit corresponds to 1 millimeter, is this a safe/conventional assumption?",
"there a convention for the scale of the 3D printing",
"are shared online and/or expected by 3-D printers? I found",
"printers? I found a model on Thingiverse that is useful",
"Thingiverse that is useful for my project, a connector that",
"project, a connector that must fit with other parts, so",
"other parts, so precision is important. Eyeballing, it seems that",
"STL unit corresponds to 1 millimeter, is this a safe/conventional",
"must fit with other parts, so precision is important. Eyeballing,",
"and/or expected by 3-D printers? I found a model on",
"on Thingiverse that is useful for my project, a connector",
"so precision is important. Eyeballing, it seems that each STL",
"connector that must fit with other parts, so precision is",
"with other parts, so precision is important. Eyeballing, it seems",
"seems that each STL unit corresponds to 1 millimeter, is",
"that must fit with other parts, so precision is important.",
"convention for the scale of the 3D printing STL files",
"scale of the 3D printing STL files that are shared",
"I found a model on Thingiverse that is useful for",
"Is there a convention for the scale of the 3D",
"files that are shared online and/or expected by 3-D printers?",
"expected by 3-D printers? I found a model on Thingiverse",
"my project, a connector that must fit with other parts,",
"parts, so precision is important. Eyeballing, it seems that each",
"fit with other parts, so precision is important. Eyeballing, it",
"by 3-D printers? I found a model on Thingiverse that",
"for my project, a connector that must fit with other"
] |
[
"designing things. I am now trying to print a dust",
"of the object during the 3D printing. How can I",
"offers free printing (you pay the materials) Here is my",
"library branch has the following 3D printers which I can",
"be my first ever 3D printing I previously worked in",
"like below), I have managed to get quotes from 3D",
"I verify if everything is OK in that respect? I",
"service providers so apparently everything looks OK I still have",
"my table saw guard. I have the model already (looks",
"from 3D printing service providers so apparently everything looks OK",
"I can use: * The LulzBot TAZ, * The Maker",
"The LulzBot TAZ, * The Maker Bot Replicator 2 *",
"I have managed to get quotes from 3D printing service",
"so apparently everything looks OK I still have doubts regarding",
"regarding the stability of the object during the 3D printing.",
"generate simple objects, mostly floor plans and various small objects",
"the stability of the object during the 3D printing. How",
"model already (looks like below), I have managed to get",
"* The LulzBot TAZ, * The Maker Bot Replicator 2",
"that respect? I plan to print at our local public",
"that would connect my vacuum to my table saw guard.",
"have doubts regarding the stability of the object during the",
"already (looks like below), I have managed to get quotes",
"printing. How can I verify if everything is OK in",
"The Maker Bot Replicator 2 * The Ultimaker 2 Plus",
"library which offers free printing (you pay the materials) Here",
"looks OK I still have doubts regarding the stability of",
"3D printers which I can use: * The LulzBot TAZ,",
"This would be my first ever 3D printing I previously",
"trying to print a dust collector (hose) adapter that would",
"would connect my vacuum to my table saw guard. I",
"printing service providers so apparently everything looks OK I still",
"which offers free printing (you pay the materials) Here is",
"mostly for visualizing and designing things. I am now trying",
"worked in Sketchup to generate simple objects, mostly floor plans",
"Here is my model, the OD at the base is",
"below), I have managed to get quotes from 3D printing",
"64.3 mm (2 17/32\", the height is 288.1 mm): [](https://i.stack.imgur.com/g8HqX.png) [Here](https://drive.google.com/file/d/1hGMpJfpFLHW0tBs2jVpVQWTiLIZi15Js/view?usp=sharing) is the link to",
"printing I previously worked in Sketchup to generate simple objects,",
"objects mostly for visualizing and designing things. I am now",
"in Sketchup to generate simple objects, mostly floor plans and",
"saw guard. I have the model already (looks like below),",
"I have the model already (looks like below), I have",
"the height is 288.1 mm): [](https://i.stack.imgur.com/g8HqX.png) [Here](https://drive.google.com/file/d/1hGMpJfpFLHW0tBs2jVpVQWTiLIZi15Js/view?usp=sharing)",
"the file. If it matters the local public library branch",
"OK I still have doubts regarding the stability of the",
"plans and various small objects mostly for visualizing and designing",
"have the model already (looks like below), I have managed",
"following 3D printers which I can use: * The LulzBot",
"local public library which offers free printing (you pay the",
"the OD at the base is 64.3 mm (2 17/32\",",
"now trying to print a dust collector (hose) adapter that",
"is 64.3 mm (2 17/32\", the height is 288.1 mm):",
"ever 3D printing I previously worked in Sketchup to generate",
"everything looks OK I still have doubts regarding the stability",
"If it matters the local public library branch has the",
"is the link to the file. If it matters the",
"* The Maker Bot Replicator 2 * The Ultimaker 2",
"to my table saw guard. I have the model already",
"How can I verify if everything is OK in that",
"it matters the local public library branch has the following",
"stability of the object during the 3D printing. How can",
"still have doubts regarding the stability of the object during",
"the local public library branch has the following 3D printers",
"description here](https://i.stack.imgur.com/g8HqX.png)](https://i.stack.imgur.com/g8HqX.png) [Here](https://drive.google.com/file/d/1hGMpJfpFLHW0tBs2jVpVQWTiLIZi15Js/view?usp=sharing) is the link to the file. If",
"I previously worked in Sketchup to generate simple objects, mostly",
"respect? I plan to print at our local public library",
"the 3D printing. How can I verify if everything is",
"has the following 3D printers which I can use: *",
"is my model, the OD at the base is 64.3",
"printers which I can use: * The LulzBot TAZ, *",
"in that respect? I plan to print at our local",
"print a dust collector (hose) adapter that would connect my",
"here](https://i.stack.imgur.com/g8HqX.png)](https://i.stack.imgur.com/g8HqX.png) [Here](https://drive.google.com/file/d/1hGMpJfpFLHW0tBs2jVpVQWTiLIZi15Js/view?usp=sharing) is the link to the file. If it",
"dust collector (hose) adapter that would connect my vacuum to",
"things. I am now trying to print a dust collector",
"previously worked in Sketchup to generate simple objects, mostly floor",
"to print at our local public library which offers free",
"the following 3D printers which I can use: * The",
"the base is 64.3 mm (2 17/32\", the height is",
"image description here](https://i.stack.imgur.com/g8HqX.png)](https://i.stack.imgur.com/g8HqX.png) [Here](https://drive.google.com/file/d/1hGMpJfpFLHW0tBs2jVpVQWTiLIZi15Js/view?usp=sharing) is the link to the file.",
"can use: * The LulzBot TAZ, * The Maker Bot",
"guard. I have the model already (looks like below), I",
"LulzBot TAZ, * The Maker Bot Replicator 2 * The",
"(looks like below), I have managed to get quotes from",
"to print a dust collector (hose) adapter that would connect",
"to get quotes from 3D printing service providers so apparently",
"OD at the base is 64.3 mm (2 17/32\", the",
"is 288.1 mm): [](https://i.stack.imgur.com/g8HqX.png) [Here](https://drive.google.com/file/d/1hGMpJfpFLHW0tBs2jVpVQWTiLIZi15Js/view?usp=sharing) is the",
"my model, the OD at the base is 64.3 mm",
"branch has the following 3D printers which I can use:",
"3D printing I previously worked in Sketchup to generate simple",
"height is 288.1 mm): [](https://i.stack.imgur.com/g8HqX.png) [Here](https://drive.google.com/file/d/1hGMpJfpFLHW0tBs2jVpVQWTiLIZi15Js/view?usp=sharing) is",
"the link to the file. If it matters the local",
"TAZ, * The Maker Bot Replicator 2 * The Ultimaker",
"object during the 3D printing. How can I verify if",
"collector (hose) adapter that would connect my vacuum to my",
"during the 3D printing. How can I verify if everything",
"managed to get quotes from 3D printing service providers so",
"matters the local public library branch has the following 3D",
"3D printing service providers so apparently everything looks OK I",
"and various small objects mostly for visualizing and designing things.",
"verify if everything is OK in that respect? I plan",
"plan to print at our local public library which offers",
"file. If it matters the local public library branch has",
"OK in that respect? I plan to print at our",
"mostly floor plans and various small objects mostly for visualizing",
"am now trying to print a dust collector (hose) adapter",
"my vacuum to my table saw guard. I have the",
"and designing things. I am now trying to print a",
"various small objects mostly for visualizing and designing things. I",
"everything is OK in that respect? I plan to print",
"[](https://i.stack.imgur.com/g8HqX.png) [Here](https://drive.google.com/file/d/1hGMpJfpFLHW0tBs2jVpVQWTiLIZi15Js/view?usp=sharing) is the link to the",
"the model already (looks like below), I have managed to",
"the object during the 3D printing. How can I verify",
"printing (you pay the materials) Here is my model, the",
"mm (2 17/32\", the height is 288.1 mm): [ is the link to the file. If it matters",
"print at our local public library which offers free printing",
"link to the file. If it matters the local public",
"I plan to print at our local public library which",
"to the file. If it matters the local public library",
"which I can use: * The LulzBot TAZ, * The",
"apparently everything looks OK I still have doubts regarding the",
"Sketchup to generate simple objects, mostly floor plans and various",
"table saw guard. I have the model already (looks like",
"have managed to get quotes from 3D printing service providers",
"17/32\", the height is 288.1 mm): [](https://i.stack.imgur.com/g8HqX.png)",
"288.1 mm): [](https://i.stack.imgur.com/g8HqX.png) [Here](https://drive.google.com/file/d/1hGMpJfpFLHW0tBs2jVpVQWTiLIZi15Js/view?usp=sharing) is the link",
"if everything is OK in that respect? I plan to",
"base is 64.3 mm (2 17/32\", the height is 288.1",
"for visualizing and designing things. I am now trying to",
"small objects mostly for visualizing and designing things. I am",
"(you pay the materials) Here is my model, the OD",
"3D printing. How can I verify if everything is OK",
"simple objects, mostly floor plans and various small objects mostly",
"local public library branch has the following 3D printers which",
"connect my vacuum to my table saw guard. I have",
"I am now trying to print a dust collector (hose)",
"our local public library which offers free printing (you pay",
"objects, mostly floor plans and various small objects mostly for",
"materials) Here is my model, the OD at the base",
"can I verify if everything is OK in that respect?",
"to generate simple objects, mostly floor plans and various small",
"first ever 3D printing I previously worked in Sketchup to",
"visualizing and designing things. I am now trying to print",
"adapter that would connect my vacuum to my table saw",
"pay the materials) Here is my model, the OD at",
"the materials) Here is my model, the OD at the",
"vacuum to my table saw guard. I have the model",
"public library branch has the following 3D printers which I",
"would be my first ever 3D printing I previously worked",
"providers so apparently everything looks OK I still have doubts",
"free printing (you pay the materials) Here is my model,",
"I still have doubts regarding the stability of the object",
"at our local public library which offers free printing (you",
"at the base is 64.3 mm (2 17/32\", the height",
"my first ever 3D printing I previously worked in Sketchup",
"doubts regarding the stability of the object during the 3D",
"public library which offers free printing (you pay the materials)",
"use: * The LulzBot TAZ, * The Maker Bot Replicator",
"a dust collector (hose) adapter that would connect my vacuum",
"quotes from 3D printing service providers so apparently everything looks",
"(2 17/32\", the height is 288.1 mm): [![enter image description",
"model, the OD at the base is 64.3 mm (2",
"is OK in that respect? I plan to print at",
"get quotes from 3D printing service providers so apparently everything"
] |
[
"read that the magnet can attach to the nozzle while",
"can attach to the nozzle while printing. How can I",
"I would like to avoid any problems. I read that",
"I read that the magnet can attach to the nozzle",
"placing](https://i.stack.imgur.com/Lz3bj.png)](https://i.stack.imgur.com/Lz3bj.png) I added pause on layer (`M601`) in slicer. Since,",
"nozzle while printing. How can I avoid this, and what",
"add neodymium magnets during print. The model, which I would",
"else should I watch out for? How should I prepare",
"for placing magnets. [](https://i.stack.imgur.com/Lz3bj.png) I added",
"neodymium magnets during print. The model, which I would like",
"has fully enclosed holes made for placing magnets. [](https://i.stack.imgur.com/Lz3bj.png) I added pause on layer (`M601`) in",
"to avoid any problems. I read that the magnet can",
"to the nozzle while printing. How can I avoid this,",
"the magnet can attach to the nozzle while printing. How",
"that the magnet can attach to the nozzle while printing.",
"while printing. How can I avoid this, and what else",
"I watch out for? How should I prepare in advance",
"magnet can attach to the nozzle while printing. How can",
"placing magnets. [](https://i.stack.imgur.com/Lz3bj.png) I added pause",
"would like to avoid any problems. I read that the",
"How can I avoid this, and what else should I",
"this is a very long print, I would like to",
"would like to add neodymium magnets during print. The model,",
"attach to the nozzle while printing. How can I avoid",
"print, I would like to avoid any problems. I read",
"out for? How should I prepare in advance for magnets",
"to add neodymium magnets during print. The model, which I",
"would like to print, has fully enclosed holes made for",
"this, and what else should I watch out for? How",
"like to add neodymium magnets during print. The model, which",
"for? How should I prepare in advance for magnets placing?",
"prepared for magnet placing](https://i.stack.imgur.com/Lz3bj.png)](https://i.stack.imgur.com/Lz3bj.png) I added pause on layer (`M601`)",
"Since, this is a very long print, I would like",
"made for placing magnets. [](https://i.stack.imgur.com/Lz3bj.png) I",
"to print, has fully enclosed holes made for placing magnets.",
"problems. I read that the magnet can attach to the",
"magnet placing](https://i.stack.imgur.com/Lz3bj.png)](https://i.stack.imgur.com/Lz3bj.png) I added pause on layer (`M601`) in slicer.",
"enclosed holes made for placing magnets. [](https://i.stack.imgur.com/Lz3bj.png) I added pause on layer",
"which I would like to print, has fully enclosed holes",
"pause on layer (`M601`) in slicer. Since, this is a",
"and what else should I watch out for? How should",
"a very long print, I would like to avoid any",
"like to print, has fully enclosed holes made for placing",
"long print, I would like to avoid any problems. I",
"fully enclosed holes made for placing magnets. [](https://i.stack.imgur.com/Lz3bj.png)",
"I avoid this, and what else should I watch out",
"should I watch out for? How should I prepare in",
"print. The model, which I would like to print, has",
"magnets. [](https://i.stack.imgur.com/Lz3bj.png) I added pause on",
"can I avoid this, and what else should I watch",
"(`M601`) in slicer. Since, this is a very long print,",
"slicer. Since, this is a very long print, I would",
"is a very long print, I would like to avoid",
"like to avoid any problems. I read that the magnet",
"any problems. I read that the magnet can attach to",
"I would like to add neodymium magnets during print. The",
"avoid any problems. I read that the magnet can attach",
"avoid this, and what else should I watch out for?",
"during print. The model, which I would like to print,",
"The model, which I would like to print, has fully",
"the nozzle while printing. How can I avoid this, and",
"model, which I would like to print, has fully enclosed",
"I would like to print, has fully enclosed holes made",
"I added pause on layer (`M601`) in slicer. Since, this"
] |
[
"with this cross section (the full object is just this",
"from the outside, something like this (excuse the terrible diagram):",
"just this mirrored): [![Object](https://i.stack.imgur.com/r1cDx.png \"Object\")](https://i.stack.imgur.com/r1cDx.png \"Object\") The problem is that",
"slice it in a spiral inwards from the outside, something",
"object with this cross section (the full object is just",
"\"Object\")](https://i.stack.imgur.com/r1cDx.png \"Object\") The problem is that big overhang layer. Cura",
"am trying to print an object with this cross section",
"big overhang layer. Cura slices it like this: [![Bad slice](https://i.stack.imgur.com/52SrT.jpg",
"Cura slices it like this: [![Bad slice](https://i.stack.imgur.com/52SrT.jpg \"Bad slice\")](https://i.stack.imgur.com/52SrT.jpg \"Bad",
"this cross section (the full object is just this mirrored):",
"it like this: [![Bad slice](https://i.stack.imgur.com/52SrT.jpg \"Bad slice\")](https://i.stack.imgur.com/52SrT.jpg \"Bad slice\") This",
"Is there any way to make Cura slice it in",
"is that big overhang layer. Cura slices it like this:",
"[![Object](https://i.stack.imgur.com/r1cDx.png \"Object\")](https://i.stack.imgur.com/r1cDx.png \"Object\") The problem is that big overhang layer.",
"print an object with this cross section (the full object",
"spiral inwards from the outside, something like this (excuse the",
"like this: [![Bad slice](https://i.stack.imgur.com/52SrT.jpg \"Bad slice\")](https://i.stack.imgur.com/52SrT.jpg \"Bad slice\") This is",
"this mirrored): [![Object](https://i.stack.imgur.com/r1cDx.png \"Object\")](https://i.stack.imgur.com/r1cDx.png \"Object\") The problem is that big",
"an object with this cross section (the full object is",
"\"Object\") The problem is that big overhang layer. Cura slices",
"in a spiral inwards from the outside, something like this",
"obviously going to fail. Is there any way to make",
"to make Cura slice it in a spiral inwards from",
"problem is that big overhang layer. Cura slices it like",
"cross section (the full object is just this mirrored): [![Object](https://i.stack.imgur.com/r1cDx.png",
"going to fail. Is there any way to make Cura",
"inwards from the outside, something like this (excuse the terrible",
"(excuse the terrible diagram): [![Good slice](https://i.stack.imgur.com/gLUbJ.png \"Good slice\")](https://i.stack.imgur.com/gLUbJ.png \"Good slice\")",
"it in a spiral inwards from the outside, something like",
"this (excuse the terrible diagram): [![Good slice](https://i.stack.imgur.com/gLUbJ.png \"Good slice\")](https://i.stack.imgur.com/gLUbJ.png \"Good",
"to fail. Is there any way to make Cura slice",
"layer. Cura slices it like this: [![Bad slice](https://i.stack.imgur.com/52SrT.jpg \"Bad slice\")](https://i.stack.imgur.com/52SrT.jpg",
"Cura slice it in a spiral inwards from the outside,",
"like this (excuse the terrible diagram): [![Good slice](https://i.stack.imgur.com/gLUbJ.png \"Good slice\")](https://i.stack.imgur.com/gLUbJ.png",
"outside, something like this (excuse the terrible diagram): [![Good slice](https://i.stack.imgur.com/gLUbJ.png",
"The problem is that big overhang layer. Cura slices it",
"to print an object with this cross section (the full",
"trying to print an object with this cross section (the",
"is just this mirrored): [![Object](https://i.stack.imgur.com/r1cDx.png \"Object\")](https://i.stack.imgur.com/r1cDx.png \"Object\") The problem is",
"slices it like this: [![Bad slice](https://i.stack.imgur.com/52SrT.jpg \"Bad slice\")](https://i.stack.imgur.com/52SrT.jpg \"Bad slice\")",
"full object is just this mirrored): [![Object](https://i.stack.imgur.com/r1cDx.png \"Object\")](https://i.stack.imgur.com/r1cDx.png \"Object\") The",
"the outside, something like this (excuse the terrible diagram): [![Good",
"there any way to make Cura slice it in a",
"any way to make Cura slice it in a spiral",
"slice\") This is obviously going to fail. Is there any",
"slice\")](https://i.stack.imgur.com/52SrT.jpg \"Bad slice\") This is obviously going to fail. Is",
"is obviously going to fail. Is there any way to",
"mirrored): [![Object](https://i.stack.imgur.com/r1cDx.png \"Object\")](https://i.stack.imgur.com/r1cDx.png \"Object\") The problem is that big overhang",
"overhang layer. Cura slices it like this: [![Bad slice](https://i.stack.imgur.com/52SrT.jpg \"Bad",
"slice](https://i.stack.imgur.com/52SrT.jpg \"Bad slice\")](https://i.stack.imgur.com/52SrT.jpg \"Bad slice\") This is obviously going to",
"\"Bad slice\") This is obviously going to fail. Is there",
"way to make Cura slice it in a spiral inwards",
"make Cura slice it in a spiral inwards from the",
"fail. Is there any way to make Cura slice it",
"something like this (excuse the terrible diagram): [![Good slice](https://i.stack.imgur.com/gLUbJ.png \"Good",
"[![Bad slice](https://i.stack.imgur.com/52SrT.jpg \"Bad slice\")](https://i.stack.imgur.com/52SrT.jpg \"Bad slice\") This is obviously going",
"(the full object is just this mirrored): [![Object](https://i.stack.imgur.com/r1cDx.png \"Object\")](https://i.stack.imgur.com/r1cDx.png \"Object\")",
"that big overhang layer. Cura slices it like this: [![Bad",
"a spiral inwards from the outside, something like this (excuse",
"this: [![Bad slice](https://i.stack.imgur.com/52SrT.jpg \"Bad slice\")](https://i.stack.imgur.com/52SrT.jpg \"Bad slice\") This is obviously",
"\"Bad slice\")](https://i.stack.imgur.com/52SrT.jpg \"Bad slice\") This is obviously going to fail.",
"This is obviously going to fail. Is there any way",
"object is just this mirrored): [![Object](https://i.stack.imgur.com/r1cDx.png \"Object\")](https://i.stack.imgur.com/r1cDx.png \"Object\") The problem",
"section (the full object is just this mirrored): [![Object](https://i.stack.imgur.com/r1cDx.png \"Object\")](https://i.stack.imgur.com/r1cDx.png",
"I am trying to print an object with this cross"
] |
[
"heatsink with some type of residue inside\")](https://i.stack.imgur.com/MRhQR.jpg \"Photo of the",
"out? What is this residue? Will this cause problems in",
"inside](https://i.stack.imgur.com/MRhQR.jpg \"Photo of the Creality stock heatsink with some type",
"the Bowden tube so much so that I had to",
"that I had to remove it from the stock Creality",
"on my Ender 3 v2. As I was taking the",
"the tube out of the heatsink I noticed some residue",
"or can it be cleaned out? What is this residue?",
"Creality stock heatsink with some type of residue inside](https://i.stack.imgur.com/MRhQR.jpg \"Photo",
"with some type of residue inside\")](https://i.stack.imgur.com/MRhQR.jpg \"Photo of the Creality",
"[![Photo of the Creality stock heatsink with some type of",
"replace my heatsink or can it be cleaned out? What",
"it be cleaned out? What is this residue? Will this",
"heatsink with some type of residue inside\") Do I have",
"Creality heatsink on my Ender 3 v2. As I was",
"of residue inside](https://i.stack.imgur.com/MRhQR.jpg \"Photo of the Creality stock heatsink with",
"the stock Creality heatsink on my Ender 3 v2. As",
"had some filament get stuck in the Bowden tube so",
"my Ender 3 v2. As I was taking the tube",
"with some type of residue inside](https://i.stack.imgur.com/MRhQR.jpg \"Photo of the Creality",
"3 v2. As I was taking the tube out of",
"out of the heatsink I noticed some residue inside: [![Photo",
"with some type of residue inside\") Do I have to",
"stuck in the Bowden tube so much so that I",
"stock heatsink with some type of residue inside](https://i.stack.imgur.com/MRhQR.jpg \"Photo of",
"had to remove it from the stock Creality heatsink on",
"tube so much so that I had to remove it",
"I was taking the tube out of the heatsink I",
"the Creality stock heatsink with some type of residue inside](https://i.stack.imgur.com/MRhQR.jpg",
"so much so that I had to remove it from",
"get stuck in the Bowden tube so much so that",
"residue inside\")](https://i.stack.imgur.com/MRhQR.jpg \"Photo of the Creality stock heatsink with some",
"so that I had to remove it from the stock",
"was taking the tube out of the heatsink I noticed",
"type of residue inside](https://i.stack.imgur.com/MRhQR.jpg \"Photo of the Creality stock heatsink",
"What is this residue? Will this cause problems in the",
"Do I have to replace my heatsink or can it",
"have to replace my heatsink or can it be cleaned",
"noticed some residue inside: [![Photo of the Creality stock heatsink",
"Creality stock heatsink with some type of residue inside\") Do",
"Creality stock heatsink with some type of residue inside\")](https://i.stack.imgur.com/MRhQR.jpg \"Photo",
"recently had some filament get stuck in the Bowden tube",
"the heatsink I noticed some residue inside: [![Photo of the",
"Bowden tube so much so that I had to remove",
"stock heatsink with some type of residue inside\") Do I",
"cleaned out? What is this residue? Will this cause problems",
"some type of residue inside\") Do I have to replace",
"As I was taking the tube out of the heatsink",
"type of residue inside\") Do I have to replace my",
"I recently had some filament get stuck in the Bowden",
"inside: [![Photo of the Creality stock heatsink with some type",
"inside\") Do I have to replace my heatsink or can",
"from the stock Creality heatsink on my Ender 3 v2.",
"some residue inside: [![Photo of the Creality stock heatsink with",
"I noticed some residue inside: [![Photo of the Creality stock",
"to remove it from the stock Creality heatsink on my",
"heatsink with some type of residue inside](https://i.stack.imgur.com/MRhQR.jpg \"Photo of the",
"taking the tube out of the heatsink I noticed some",
"stock Creality heatsink on my Ender 3 v2. As I",
"is this residue? Will this cause problems in the future?",
"type of residue inside\")](https://i.stack.imgur.com/MRhQR.jpg \"Photo of the Creality stock heatsink",
"can it be cleaned out? What is this residue? Will",
"it from the stock Creality heatsink on my Ender 3",
"inside\")](https://i.stack.imgur.com/MRhQR.jpg \"Photo of the Creality stock heatsink with some type",
"heatsink I noticed some residue inside: [![Photo of the Creality",
"I have to replace my heatsink or can it be",
"in the Bowden tube so much so that I had",
"of residue inside\") Do I have to replace my heatsink",
"I had to remove it from the stock Creality heatsink",
"of residue inside\")](https://i.stack.imgur.com/MRhQR.jpg \"Photo of the Creality stock heatsink with",
"some filament get stuck in the Bowden tube so much",
"remove it from the stock Creality heatsink on my Ender",
"the Creality stock heatsink with some type of residue inside\")](https://i.stack.imgur.com/MRhQR.jpg",
"tube out of the heatsink I noticed some residue inside:",
"of the Creality stock heatsink with some type of residue",
"of the heatsink I noticed some residue inside: [![Photo of",
"be cleaned out? What is this residue? Will this cause",
"my heatsink or can it be cleaned out? What is",
"heatsink or can it be cleaned out? What is this",
"residue inside\") Do I have to replace my heatsink or",
"Ender 3 v2. As I was taking the tube out",
"much so that I had to remove it from the",
"to replace my heatsink or can it be cleaned out?",
"residue inside](https://i.stack.imgur.com/MRhQR.jpg \"Photo of the Creality stock heatsink with some",
"\"Photo of the Creality stock heatsink with some type of",
"some type of residue inside](https://i.stack.imgur.com/MRhQR.jpg \"Photo of the Creality stock",
"v2. As I was taking the tube out of the",
"some type of residue inside\")](https://i.stack.imgur.com/MRhQR.jpg \"Photo of the Creality stock",
"heatsink on my Ender 3 v2. As I was taking",
"stock heatsink with some type of residue inside\")](https://i.stack.imgur.com/MRhQR.jpg \"Photo of",
"filament get stuck in the Bowden tube so much so",
"the Creality stock heatsink with some type of residue inside\")",
"residue inside: [![Photo of the Creality stock heatsink with some"
] |
[
"different filament [![Z Calibration Pattern](https://i.stack.imgur.com/ct23e.jpg \"Z Calibration Pattern\")](https://i.stack.imgur.com/ct23e.jpg \"Z Calibration",
"Z Calibration Pattern](https://i.stack.imgur.com/KYVaG.jpg \"Back Right Corner of Z Calibration Pattern\")](https://i.stack.imgur.com/KYVaG.jpg",
"`M500` to save the mesh * Add `M420 S1` to",
"Pattern\") [![Back Right Corner of Z Calibration Pattern](https://i.stack.imgur.com/KYVaG.jpg \"Back Right",
"attached controller * Run auto leveling again with the `G29`",
"up in the right back corner, compared to the front",
"Calibration Pattern\") [![Back Right Corner of Z Calibration Pattern](https://i.stack.imgur.com/KYVaG.jpg \"Back",
"higher up in the right back corner, compared to the",
"printer consistently prints higher up in the right back corner,",
"does not compensate for bed tilt in X and Y",
"left corner of the build plate. The problem does not",
"corner, compared to the front left corner of the build",
"Calibration Pattern](https://i.stack.imgur.com/DAEZC.jpg \"Front left Corner of Z Calibration Pattern\")](https://i.stack.imgur.com/DAEZC.jpg \"Front",
"Calibration Pattern](https://i.stack.imgur.com/ct23e.jpg \"Z Calibration Pattern\")](https://i.stack.imgur.com/ct23e.jpg \"Z Calibration Pattern\") [![Front left",
"of Z Calibration Pattern\")](https://i.stack.imgur.com/DAEZC.jpg \"Front left Corner of Z Calibration",
"to be related to auto bed leveling being disabled though.",
"leveling does not compensate for bed tilt in X and",
"has issues with auto bed leveling. Specifically, auto bed leveling",
"compensate for something. What I tried: * Print Z calibration",
"Anycubic Kobra Neo. It works but has issues with auto",
"Z Calibration Pattern\") [![Back Right Corner of Z Calibration Pattern](https://i.stack.imgur.com/KYVaG.jpg",
"for bed tilt in X and Y directions correctly. After",
"an Anycubic Kobra Neo. It works but has issues with",
"and both together) * Reset EEPROM with `M502` * Use",
"both together) * Reset EEPROM with `M502` * Use Repetier",
"Reset EEPROM with `M502` * Use Repetier Host instead of",
"[![Back Right Corner of Z Calibration Pattern](https://i.stack.imgur.com/KYVaG.jpg \"Back Right Corner",
"problem does not seem to be related to auto bed",
"by `M500` to save the mesh * Add `M420 S1`",
"leveling. Specifically, auto bed leveling does not compensate for bed",
"\"Z Calibration Pattern\")](https://i.stack.imgur.com/ct23e.jpg \"Z Calibration Pattern\") [![Front left Corner of",
"and prior `G28` to home, followed by `M500` to save",
"Pattern](https://i.stack.imgur.com/KYVaG.jpg \"Back Right Corner of Z Calibration Pattern\")](https://i.stack.imgur.com/KYVaG.jpg \"Back Right",
"X and Y directions correctly. After running the auto leveling,",
"Used different filament [![Z Calibration Pattern](https://i.stack.imgur.com/ct23e.jpg \"Z Calibration Pattern\")](https://i.stack.imgur.com/ct23e.jpg \"Z",
"`M420 S1` to start G-code (also tried `M420 L` and",
"`M420 L` and both together) * Reset EEPROM with `M502`",
"recently bought an Anycubic Kobra Neo. It works but has",
"works but has issues with auto bed leveling. Specifically, auto",
"I recently bought an Anycubic Kobra Neo. It works but",
"bed tilt in X and Y directions correctly. After running",
"Z calibration patterns * Run auto leveling again using the",
"* Run auto leveling again using the attached controller *",
"compared to the front left corner of the build plate.",
"the attached controller * Run auto leveling again with the",
"the Z lead screw turning, so the printer definitely tries",
"patterns * Run auto leveling again using the attached controller",
"the front left corner of the build plate. The problem",
"consistently prints higher up in the right back corner, compared",
"disabled though. While printing, you can see the Z lead",
"back corner, compared to the front left corner of the",
"v1.3.3), Cura 5.2.1 I recently bought an Anycubic Kobra Neo.",
"Corner of Z Calibration Pattern](https://i.stack.imgur.com/DAEZC.jpg \"Front left Corner of Z",
"It works but has issues with auto bed leveling. Specifically,",
"leveling being disabled though. While printing, you can see the",
"to save the mesh * Add `M420 S1` to start",
"the mesh * Add `M420 S1` to start G-code (also",
"* Reset EEPROM with `M502` * Use Repetier Host instead",
"instead of Cura * Used different filament [![Z Calibration Pattern](https://i.stack.imgur.com/ct23e.jpg",
"Corner of Z Calibration Pattern\")](https://i.stack.imgur.com/KYVaG.jpg \"Back Right Corner of Z",
"5.2.1 I recently bought an Anycubic Kobra Neo. It works",
"to compensate for something. What I tried: * Print Z",
"for something. What I tried: * Print Z calibration patterns",
"tried: * Print Z calibration patterns * Run auto leveling",
"left Corner of Z Calibration Pattern\")](https://i.stack.imgur.com/DAEZC.jpg \"Front left Corner of",
"Run auto leveling again using the attached controller * Run",
"of the build plate. The problem does not seem to",
"Right Corner of Z Calibration Pattern\")](https://i.stack.imgur.com/KYVaG.jpg \"Back Right Corner of",
"the printer consistently prints higher up in the right back",
"Cura 5.2.1 I recently bought an Anycubic Kobra Neo. It",
"issues with auto bed leveling. Specifically, auto bed leveling does",
"The problem does not seem to be related to auto",
"`G28` to home, followed by `M500` to save the mesh",
"of Z Calibration Pattern\")](https://i.stack.imgur.com/KYVaG.jpg \"Back Right Corner of Z Calibration",
"printing, you can see the Z lead screw turning, so",
"Add `M420 S1` to start G-code (also tried `M420 L`",
"though. While printing, you can see the Z lead screw",
"being disabled though. While printing, you can see the Z",
"again with the `G29` command and prior `G28` to home,",
"(also tried `M420 L` and both together) * Reset EEPROM",
"I tried: * Print Z calibration patterns * Run auto",
"and Y directions correctly. After running the auto leveling, the",
"Kobra Neo (Firmware v1.3.3), Cura 5.2.1 I recently bought an",
"bed leveling being disabled though. While printing, you can see",
"not seem to be related to auto bed leveling being",
"(Firmware v1.3.3), Cura 5.2.1 I recently bought an Anycubic Kobra",
"Z Calibration Pattern\")](https://i.stack.imgur.com/KYVaG.jpg \"Back Right Corner of Z Calibration Pattern\")",
"seem to be related to auto bed leveling being disabled",
"auto bed leveling. Specifically, auto bed leveling does not compensate",
"Z lead screw turning, so the printer definitely tries to",
"auto leveling again using the attached controller * Run auto",
"\"Z Calibration Pattern\") [![Front left Corner of Z Calibration Pattern](https://i.stack.imgur.com/DAEZC.jpg",
"auto bed leveling being disabled though. While printing, you can",
"\"Front left Corner of Z Calibration Pattern\") [![Back Right Corner",
"start G-code (also tried `M420 L` and both together) *",
"* Add `M420 S1` to start G-code (also tried `M420",
"definitely tries to compensate for something. What I tried: *",
"Z Calibration Pattern](https://i.stack.imgur.com/DAEZC.jpg \"Front left Corner of Z Calibration Pattern\")](https://i.stack.imgur.com/DAEZC.jpg",
"you can see the Z lead screw turning, so the",
"followed by `M500` to save the mesh * Add `M420",
"Cura * Used different filament [![Z Calibration Pattern](https://i.stack.imgur.com/ct23e.jpg \"Z Calibration",
"bed leveling does not compensate for bed tilt in X",
"in the right back corner, compared to the front left",
"to auto bed leveling being disabled though. While printing, you",
"using the attached controller * Run auto leveling again with",
"together) * Reset EEPROM with `M502` * Use Repetier Host",
"Setup: Anycubic Kobra Neo (Firmware v1.3.3), Cura 5.2.1 I recently",
"something. What I tried: * Print Z calibration patterns *",
"[![Front left Corner of Z Calibration Pattern](https://i.stack.imgur.com/DAEZC.jpg \"Front left Corner",
"Specifically, auto bed leveling does not compensate for bed tilt",
"the auto leveling, the printer consistently prints higher up in",
"auto bed leveling does not compensate for bed tilt in",
"with the `G29` command and prior `G28` to home, followed",
"calibration patterns * Run auto leveling again using the attached",
"Calibration Pattern\")](https://i.stack.imgur.com/DAEZC.jpg \"Front left Corner of Z Calibration Pattern\") [![Back",
"Right Corner of Z Calibration Pattern](https://i.stack.imgur.com/KYVaG.jpg \"Back Right Corner of",
"Anycubic Kobra Neo (Firmware v1.3.3), Cura 5.2.1 I recently bought",
"Host instead of Cura * Used different filament [![Z Calibration",
"\"Back Right Corner of Z Calibration Pattern\")](https://i.stack.imgur.com/KYVaG.jpg \"Back Right Corner",
"auto leveling, the printer consistently prints higher up in the",
"bought an Anycubic Kobra Neo. It works but has issues",
"front left corner of the build plate. The problem does",
"Corner of Z Calibration Pattern](https://i.stack.imgur.com/KYVaG.jpg \"Back Right Corner of Z",
"Calibration Pattern](https://i.stack.imgur.com/KYVaG.jpg \"Back Right Corner of Z Calibration Pattern\")](https://i.stack.imgur.com/KYVaG.jpg \"Back",
"the printer definitely tries to compensate for something. What I",
"but has issues with auto bed leveling. Specifically, auto bed",
"tries to compensate for something. What I tried: * Print",
"`M502` * Use Repetier Host instead of Cura * Used",
"S1` to start G-code (also tried `M420 L` and both",
"Kobra Neo. It works but has issues with auto bed",
"What I tried: * Print Z calibration patterns * Run",
"related to auto bed leveling being disabled though. While printing,",
"with auto bed leveling. Specifically, auto bed leveling does not",
"EEPROM with `M502` * Use Repetier Host instead of Cura",
"Neo (Firmware v1.3.3), Cura 5.2.1 I recently bought an Anycubic",
"save the mesh * Add `M420 S1` to start G-code",
"bed leveling. Specifically, auto bed leveling does not compensate for",
"leveling again with the `G29` command and prior `G28` to",
"the `G29` command and prior `G28` to home, followed by",
"left Corner of Z Calibration Pattern\") [![Back Right Corner of",
"again using the attached controller * Run auto leveling again",
"Neo. It works but has issues with auto bed leveling.",
"Run auto leveling again with the `G29` command and prior",
"corner of the build plate. The problem does not seem",
"printer definitely tries to compensate for something. What I tried:",
"command and prior `G28` to home, followed by `M500` to",
"Pattern](https://i.stack.imgur.com/ct23e.jpg \"Z Calibration Pattern\")](https://i.stack.imgur.com/ct23e.jpg \"Z Calibration Pattern\") [![Front left Corner",
"Repetier Host instead of Cura * Used different filament [![Z",
"controller * Run auto leveling again with the `G29` command",
"to home, followed by `M500` to save the mesh *",
"Corner of Z Calibration Pattern\") [![Back Right Corner of Z",
"turning, so the printer definitely tries to compensate for something.",
"tried `M420 L` and both together) * Reset EEPROM with",
"of Z Calibration Pattern](https://i.stack.imgur.com/DAEZC.jpg \"Front left Corner of Z Calibration",
"of Z Calibration Pattern\") [![Back Right Corner of Z Calibration",
"After running the auto leveling, the printer consistently prints higher",
"correctly. After running the auto leveling, the printer consistently prints",
"left Corner of Z Calibration Pattern](https://i.stack.imgur.com/DAEZC.jpg \"Front left Corner of",
"does not seem to be related to auto bed leveling",
"prints higher up in the right back corner, compared to",
"Calibration Pattern\")](https://i.stack.imgur.com/ct23e.jpg \"Z Calibration Pattern\") [![Front left Corner of Z",
"build plate. The problem does not seem to be related",
"screw turning, so the printer definitely tries to compensate for",
"of Cura * Used different filament [![Z Calibration Pattern](https://i.stack.imgur.com/ct23e.jpg \"Z",
"Calibration Pattern\") [![Front left Corner of Z Calibration Pattern](https://i.stack.imgur.com/DAEZC.jpg \"Front",
"directions correctly. After running the auto leveling, the printer consistently",
"filament [![Z Calibration Pattern](https://i.stack.imgur.com/ct23e.jpg \"Z Calibration Pattern\")](https://i.stack.imgur.com/ct23e.jpg \"Z Calibration Pattern\")",
"leveling, the printer consistently prints higher up in the right",
"\"Front left Corner of Z Calibration Pattern\")](https://i.stack.imgur.com/DAEZC.jpg \"Front left Corner",
"be related to auto bed leveling being disabled though. While",
"of Z Calibration Pattern](https://i.stack.imgur.com/KYVaG.jpg \"Back Right Corner of Z Calibration",
"L` and both together) * Reset EEPROM with `M502` *",
"Corner of Z Calibration Pattern\")](https://i.stack.imgur.com/DAEZC.jpg \"Front left Corner of Z",
"Use Repetier Host instead of Cura * Used different filament",
"in X and Y directions correctly. After running the auto",
"compensate for bed tilt in X and Y directions correctly.",
"tilt in X and Y directions correctly. After running the",
"with `M502` * Use Repetier Host instead of Cura *",
"While printing, you can see the Z lead screw turning,",
"see the Z lead screw turning, so the printer definitely",
"* Print Z calibration patterns * Run auto leveling again",
"Y directions correctly. After running the auto leveling, the printer",
"prior `G28` to home, followed by `M500` to save the",
"Pattern\")](https://i.stack.imgur.com/ct23e.jpg \"Z Calibration Pattern\") [![Front left Corner of Z Calibration",
"auto leveling again with the `G29` command and prior `G28`",
"the build plate. The problem does not seem to be",
"home, followed by `M500` to save the mesh * Add",
"`G29` command and prior `G28` to home, followed by `M500`",
"to start G-code (also tried `M420 L` and both together)",
"not compensate for bed tilt in X and Y directions",
"can see the Z lead screw turning, so the printer",
"to the front left corner of the build plate. The",
"so the printer definitely tries to compensate for something. What",
"Pattern](https://i.stack.imgur.com/DAEZC.jpg \"Front left Corner of Z Calibration Pattern\")](https://i.stack.imgur.com/DAEZC.jpg \"Front left",
"lead screw turning, so the printer definitely tries to compensate",
"leveling again using the attached controller * Run auto leveling",
"Pattern\")](https://i.stack.imgur.com/DAEZC.jpg \"Front left Corner of Z Calibration Pattern\") [![Back Right",
"* Used different filament [![Z Calibration Pattern](https://i.stack.imgur.com/ct23e.jpg \"Z Calibration Pattern\")](https://i.stack.imgur.com/ct23e.jpg",
"Z Calibration Pattern\")](https://i.stack.imgur.com/DAEZC.jpg \"Front left Corner of Z Calibration Pattern\")",
"Pattern\") [![Front left Corner of Z Calibration Pattern](https://i.stack.imgur.com/DAEZC.jpg \"Front left",
"running the auto leveling, the printer consistently prints higher up",
"the right back corner, compared to the front left corner",
"right back corner, compared to the front left corner of",
"plate. The problem does not seem to be related to",
"mesh * Add `M420 S1` to start G-code (also tried",
"G-code (also tried `M420 L` and both together) * Reset",
"* Run auto leveling again with the `G29` command and",
"* Use Repetier Host instead of Cura * Used different",
"[![Z Calibration Pattern](https://i.stack.imgur.com/ct23e.jpg \"Z Calibration Pattern\")](https://i.stack.imgur.com/ct23e.jpg \"Z Calibration Pattern\") [![Front",
"Print Z calibration patterns * Run auto leveling again using"
] |
[
"mm nozzle. [![Side view of a 3D printed model with",
"nice prints out of standard PLA and also PETG. Maybe",
"also PETG. Maybe it’s just the glossiness of the silk",
"zits on the surface\")](https://i.stack.imgur.com/KPdHH.jpg \"Side view of a 3D printed",
"for Cura floating around and I tried them but most",
"Cura floating around and I tried them but most of",
"layer height and 50 mm feed rate. Everything is stock",
"giving me these blemishes. I’m using a .6 mm nozzle,",
"printed model with zits on the surface](https://i.stack.imgur.com/KPdHH.jpg \"Side view of",
"zits. I’ve already tuned my E-steps, and have done temp",
"surface\")](https://i.stack.imgur.com/KPdHH.jpg \"Side view of a 3D printed model with zits",
"be a lot of profiles for Cura floating around and",
"3 that I have been learning for about a month",
"of them seem to be tailored to the standard .4",
"blemishes. I’m using a .6 mm nozzle, temp tower showed",
"already tuned my E-steps, and have done temp towers, retraction",
"be tailored to the standard .4 mm nozzle. [![Side view",
"zits on the surface](https://i.stack.imgur.com/PihNp.jpg \"Another view of a 3D printed",
"is giving me these blemishes. I’m using a .6 mm",
"°C for the bed. Printing at .2 mm layer height",
"I have been learning for about a month now. I’ve",
"3D printed model with zits on the surface\")](https://i.stack.imgur.com/KPdHH.jpg \"Side view",
"using a .6 mm nozzle, temp tower showed 195 °C",
"test towers, and flow tests but just can’t seem to",
"tower showed 195 °C for the nozzle, 60 °C for",
"BLTouch. There seem to be a lot of profiles for",
"with zits on the surface](https://i.stack.imgur.com/KPdHH.jpg \"Side view of a 3D",
"that I have been learning for about a month now.",
"view of a 3D printed model with zits on the",
"tried them but most of them seem to be tailored",
"to be tailored to the standard .4 mm nozzle. [![Side",
"silk. I’ve managed to get some quite nice prints out",
"the surface\")](https://i.stack.imgur.com/PihNp.jpg \"Another view of a 3D printed model with",
"Printing at .2 mm layer height and 50 mm feed",
"with zits on the surface\")](https://i.stack.imgur.com/PihNp.jpg \"Another view of a 3D",
"learning for about a month now. I’ve just started to",
"\"Another view of a 3D printed model with zits on",
"some quite nice prints out of standard PLA and also",
".4 mm nozzle. [![Side view of a 3D printed model",
"a .6 mm nozzle, temp tower showed 195 °C for",
"is stock except for an all-metal extruder and a BLTouch.",
"I’ve just started to print with PLA silk. I’ve managed",
"just can’t seem to nail what is giving me these",
"retraction test towers, and flow tests but just can’t seem",
"just started to print with PLA silk. I’ve managed to",
"what is giving me these blemishes. I’m using a .6",
"month now. I’ve just started to print with PLA silk.",
"and I tried them but most of them seem to",
"printed model with zits on the surface](https://i.stack.imgur.com/PihNp.jpg \"Another view of",
"to get some quite nice prints out of standard PLA",
"but just can’t seem to nail what is giving me",
"flow tests but just can’t seem to nail what is",
"I tried them but most of them seem to be",
"60 °C for the bed. Printing at .2 mm layer",
"on the surface](https://i.stack.imgur.com/KPdHH.jpg \"Side view of a 3D printed model",
"of a 3D printed model with zits on the surface\")](https://i.stack.imgur.com/PihNp.jpg",
"an all-metal extruder and a BLTouch. There seem to be",
"3D printed model with zits on the surface](https://i.stack.imgur.com/KPdHH.jpg \"Side view",
"printed model with zits on the surface\") [![Another view of",
"Ender 3 that I have been learning for about a",
"PETG. Maybe it’s just the glossiness of the silk that",
"around and I tried them but most of them seem",
"height and 50 mm feed rate. Everything is stock except",
"that is highlighting these surface zits. I’ve already tuned my",
"stock except for an all-metal extruder and a BLTouch. There",
"surface zits. I’ve already tuned my E-steps, and have done",
"for about a month now. I’ve just started to print",
"model with zits on the surface](https://i.stack.imgur.com/KPdHH.jpg \"Side view of a",
"a 3D printed model with zits on the surface](https://i.stack.imgur.com/PihNp.jpg \"Another",
"an Ender 3 that I have been learning for about",
"printed model with zits on the surface\")](https://i.stack.imgur.com/PihNp.jpg \"Another view of",
"mm feed rate. Everything is stock except for an all-metal",
"extruder and a BLTouch. There seem to be a lot",
"highlighting these surface zits. I’ve already tuned my E-steps, and",
"the silk that is highlighting these surface zits. I’ve already",
"these blemishes. I’m using a .6 mm nozzle, temp tower",
"nozzle. [![Side view of a 3D printed model with zits",
"Maybe it’s just the glossiness of the silk that is",
"with zits on the surface](https://i.stack.imgur.com/PihNp.jpg \"Another view of a 3D",
"model with zits on the surface\") [![Another view of a",
"PLA silk. I’ve managed to get some quite nice prints",
"towers, retraction test towers, and flow tests but just can’t",
"and a BLTouch. There seem to be a lot of",
"for the nozzle, 60 °C for the bed. Printing at",
"seem to nail what is giving me these blemishes. I’m",
"out of standard PLA and also PETG. Maybe it’s just",
"is highlighting these surface zits. I’ve already tuned my E-steps,",
"I have an Ender 3 that I have been learning",
"mm nozzle, temp tower showed 195 °C for the nozzle,",
"of standard PLA and also PETG. Maybe it’s just the",
"standard PLA and also PETG. Maybe it’s just the glossiness",
"°C for the nozzle, 60 °C for the bed. Printing",
"managed to get some quite nice prints out of standard",
"a 3D printed model with zits on the surface\")](https://i.stack.imgur.com/KPdHH.jpg \"Side",
"rate. Everything is stock except for an all-metal extruder and",
"but most of them seem to be tailored to the",
"3D printed model with zits on the surface\")](https://i.stack.imgur.com/PihNp.jpg \"Another view",
"I’ve managed to get some quite nice prints out of",
"Everything is stock except for an all-metal extruder and a",
"There seem to be a lot of profiles for Cura",
"a lot of profiles for Cura floating around and I",
"my E-steps, and have done temp towers, retraction test towers,",
"for the bed. Printing at .2 mm layer height and",
"seem to be a lot of profiles for Cura floating",
"most of them seem to be tailored to the standard",
"started to print with PLA silk. I’ve managed to get",
"these surface zits. I’ve already tuned my E-steps, and have",
"except for an all-metal extruder and a BLTouch. There seem",
"the surface\") [![Another view of a 3D printed model with",
"seem to be tailored to the standard .4 mm nozzle.",
"surface\") [![Another view of a 3D printed model with zits",
"to nail what is giving me these blemishes. I’m using",
"and have done temp towers, retraction test towers, and flow",
"showed 195 °C for the nozzle, 60 °C for the",
"standard .4 mm nozzle. [![Side view of a 3D printed",
"tuned my E-steps, and have done temp towers, retraction test",
"the surface](https://i.stack.imgur.com/PihNp.jpg \"Another view of a 3D printed model with",
"bed. Printing at .2 mm layer height and 50 mm",
"with zits on the surface\")](https://i.stack.imgur.com/KPdHH.jpg \"Side view of a 3D",
"about a month now. I’ve just started to print with",
"profiles for Cura floating around and I tried them but",
"surface](https://i.stack.imgur.com/PihNp.jpg \"Another view of a 3D printed model with zits",
"the glossiness of the silk that is highlighting these surface",
"them but most of them seem to be tailored to",
"\"Side view of a 3D printed model with zits on",
"the bed. Printing at .2 mm layer height and 50",
"[![Side view of a 3D printed model with zits on",
"3D printed model with zits on the surface](https://i.stack.imgur.com/PihNp.jpg \"Another view",
".2 mm layer height and 50 mm feed rate. Everything",
"been learning for about a month now. I’ve just started",
"me these blemishes. I’m using a .6 mm nozzle, temp",
"a 3D printed model with zits on the surface\")](https://i.stack.imgur.com/PihNp.jpg \"Another",
"on the surface\")](https://i.stack.imgur.com/PihNp.jpg \"Another view of a 3D printed model",
"model with zits on the surface](https://i.stack.imgur.com/PihNp.jpg \"Another view of a",
"on the surface](https://i.stack.imgur.com/PihNp.jpg \"Another view of a 3D printed model",
"just the glossiness of the silk that is highlighting these",
"towers, and flow tests but just can’t seem to nail",
"nail what is giving me these blemishes. I’m using a",
"printed model with zits on the surface\")](https://i.stack.imgur.com/KPdHH.jpg \"Side view of",
"model with zits on the surface\")](https://i.stack.imgur.com/KPdHH.jpg \"Side view of a",
"to be a lot of profiles for Cura floating around",
"to print with PLA silk. I’ve managed to get some",
"of a 3D printed model with zits on the surface](https://i.stack.imgur.com/PihNp.jpg",
"for an all-metal extruder and a BLTouch. There seem to",
"to the standard .4 mm nozzle. [![Side view of a",
"temp towers, retraction test towers, and flow tests but just",
"zits on the surface](https://i.stack.imgur.com/KPdHH.jpg \"Side view of a 3D printed",
"I’m using a .6 mm nozzle, temp tower showed 195",
"floating around and I tried them but most of them",
"get some quite nice prints out of standard PLA and",
"feed rate. Everything is stock except for an all-metal extruder",
"of the silk that is highlighting these surface zits. I’ve",
"a BLTouch. There seem to be a lot of profiles",
"it’s just the glossiness of the silk that is highlighting",
"them seem to be tailored to the standard .4 mm",
"on the surface\") [![Another view of a 3D printed model",
"and flow tests but just can’t seem to nail what",
"zits on the surface\")](https://i.stack.imgur.com/PihNp.jpg \"Another view of a 3D printed",
"with PLA silk. I’ve managed to get some quite nice",
"195 °C for the nozzle, 60 °C for the bed.",
"of a 3D printed model with zits on the surface](https://i.stack.imgur.com/KPdHH.jpg",
"the surface\")](https://i.stack.imgur.com/KPdHH.jpg \"Side view of a 3D printed model with",
"print with PLA silk. I’ve managed to get some quite",
"the nozzle, 60 °C for the bed. Printing at .2",
"on the surface\")](https://i.stack.imgur.com/KPdHH.jpg \"Side view of a 3D printed model",
"glossiness of the silk that is highlighting these surface zits.",
"nozzle, 60 °C for the bed. Printing at .2 mm",
"mm layer height and 50 mm feed rate. Everything is",
"surface\")](https://i.stack.imgur.com/PihNp.jpg \"Another view of a 3D printed model with zits",
"the surface](https://i.stack.imgur.com/KPdHH.jpg \"Side view of a 3D printed model with",
"50 mm feed rate. Everything is stock except for an",
"a 3D printed model with zits on the surface](https://i.stack.imgur.com/KPdHH.jpg \"Side",
"of profiles for Cura floating around and I tried them",
"3D printed model with zits on the surface\") [![Another view",
"a 3D printed model with zits on the surface\") [![Another",
"lot of profiles for Cura floating around and I tried",
"and also PETG. Maybe it’s just the glossiness of the",
"have been learning for about a month now. I’ve just",
"tests but just can’t seem to nail what is giving",
"can’t seem to nail what is giving me these blemishes.",
"surface](https://i.stack.imgur.com/KPdHH.jpg \"Side view of a 3D printed model with zits",
"of a 3D printed model with zits on the surface\")](https://i.stack.imgur.com/KPdHH.jpg",
"silk that is highlighting these surface zits. I’ve already tuned",
"the standard .4 mm nozzle. [![Side view of a 3D",
"of a 3D printed model with zits on the surface\")",
"model with zits on the surface\")](https://i.stack.imgur.com/PihNp.jpg \"Another view of a",
"I’ve already tuned my E-steps, and have done temp towers,",
"nozzle, temp tower showed 195 °C for the nozzle, 60",
"E-steps, and have done temp towers, retraction test towers, and",
"at .2 mm layer height and 50 mm feed rate.",
".6 mm nozzle, temp tower showed 195 °C for the",
"PLA and also PETG. Maybe it’s just the glossiness of",
"have done temp towers, retraction test towers, and flow tests",
"and 50 mm feed rate. Everything is stock except for",
"temp tower showed 195 °C for the nozzle, 60 °C",
"with zits on the surface\") [![Another view of a 3D",
"now. I’ve just started to print with PLA silk. I’ve",
"prints out of standard PLA and also PETG. Maybe it’s",
"[![Another view of a 3D printed model with zits on",
"all-metal extruder and a BLTouch. There seem to be a",
"done temp towers, retraction test towers, and flow tests but",
"have an Ender 3 that I have been learning for",
"a month now. I’ve just started to print with PLA",
"tailored to the standard .4 mm nozzle. [![Side view of",
"quite nice prints out of standard PLA and also PETG.",
"zits on the surface\") [![Another view of a 3D printed"
] |
[
"to be caused by the filament. When the nozzle heats",
"stringing](https://i.stack.imgur.com/UOKTl.jpg \"3D print showing stringing#1\")](https://i.stack.imgur.com/UOKTl.jpg \"3D print showing stringing#1\") Retract",
"print showing stringing#2](https://i.stack.imgur.com/xe0Ev.jpg \"3D print showing stringing#2\")](https://i.stack.imgur.com/xe0Ev.jpg \"3D print showing",
"be caused by the filament. When the nozzle heats up",
"which shows the stringing: [![3D print showing stringing#2](https://i.stack.imgur.com/xe0Ev.jpg \"3D print",
"retract-values: [![3D print showing stringing](https://i.stack.imgur.com/UOKTl.jpg \"3D print showing stringing#1\")](https://i.stack.imgur.com/UOKTl.jpg \"3D",
"Retract test which shows the stringing: [![3D print showing stringing#2](https://i.stack.imgur.com/xe0Ev.jpg",
"hotend apart? Retraction tower with different retract-values: [![3D print showing",
"not seem to be caused by the filament. When the",
"of my filament is new and stringing occurs with different",
"out several temperatures, settings for retract distances and retraction speed",
"Vyper which prints overall not bad but has a real",
"I tried out several temperatures, settings for retract distances and",
"by the filament. When the nozzle heats up there is",
"for retract distances and retraction speed but nothing seems to",
"seem to be caused by the filament. When the nozzle",
"stringing. I tried out several temperatures, settings for retract distances",
"something I can try to fix the stringing apart from",
"and stringing occurs with different brands so it does not",
"can try to fix the stringing apart from taking the",
"fix the stringing apart from taking the hotend apart? Retraction",
"tower with different retract-values: [![3D print showing stringing](https://i.stack.imgur.com/UOKTl.jpg \"3D print",
"filament coming out of the nozzle even the extruder is",
"work. All of my filament is new and stringing occurs",
"is molten filament coming out of the nozzle even the",
"bought a Anycubic Vyper which prints overall not bad but",
"temperatures, settings for retract distances and retraction speed but nothing",
"bad but has a real nasty issue with stringing. I",
"out of the nozzle even the extruder is not doing",
"Retraction tower with different retract-values: [![3D print showing stringing](https://i.stack.imgur.com/UOKTl.jpg \"3D",
"occurs with different brands so it does not seem to",
"and retraction speed but nothing seems to really work. All",
"but nothing seems to really work. All of my filament",
"Anycubic Vyper which prints overall not bad but has a",
"showing stringing#1\") Retract test which shows the stringing: [![3D print",
"there is molten filament coming out of the nozzle even",
"retract distances and retraction speed but nothing seems to really",
"really work. All of my filament is new and stringing",
"test which shows the stringing: [![3D print showing stringing#2](https://i.stack.imgur.com/xe0Ev.jpg \"3D",
"nozzle heats up there is molten filament coming out of",
"print showing stringing](https://i.stack.imgur.com/UOKTl.jpg \"3D print showing stringing#1\")](https://i.stack.imgur.com/UOKTl.jpg \"3D print showing",
"the hotend apart? Retraction tower with different retract-values: [![3D print",
"different brands so it does not seem to be caused",
"apart? Retraction tower with different retract-values: [![3D print showing stringing](https://i.stack.imgur.com/UOKTl.jpg",
"the nozzle even the extruder is not doing anything at",
"\"3D print showing stringing#1\") Retract test which shows the stringing:",
"filament is new and stringing occurs with different brands so",
"up there is molten filament coming out of the nozzle",
"stringing apart from taking the hotend apart? Retraction tower with",
"I recently bought a Anycubic Vyper which prints overall not",
"stringing: [![3D print showing stringing#2](https://i.stack.imgur.com/xe0Ev.jpg \"3D print showing stringing#2\")](https://i.stack.imgur.com/xe0Ev.jpg \"3D",
"caused by the filament. When the nozzle heats up there",
"overall not bad but has a real nasty issue with",
"real nasty issue with stringing. I tried out several temperatures,",
"several temperatures, settings for retract distances and retraction speed but",
"doing anything at all. Is there something I can try",
"from taking the hotend apart? Retraction tower with different retract-values:",
"[![3D print showing stringing#2](https://i.stack.imgur.com/xe0Ev.jpg \"3D print showing stringing#2\")](https://i.stack.imgur.com/xe0Ev.jpg \"3D print",
"tried out several temperatures, settings for retract distances and retraction",
"has a real nasty issue with stringing. I tried out",
"recently bought a Anycubic Vyper which prints overall not bad",
"speed but nothing seems to really work. All of my",
"Is there something I can try to fix the stringing",
"showing stringing](https://i.stack.imgur.com/UOKTl.jpg \"3D print showing stringing#1\")](https://i.stack.imgur.com/UOKTl.jpg \"3D print showing stringing#1\")",
"new and stringing occurs with different brands so it does",
"distances and retraction speed but nothing seems to really work.",
"prints overall not bad but has a real nasty issue",
"even the extruder is not doing anything at all. Is",
"showing stringing#1\")](https://i.stack.imgur.com/UOKTl.jpg \"3D print showing stringing#1\") Retract test which shows",
"showing stringing#2](https://i.stack.imgur.com/xe0Ev.jpg \"3D print showing stringing#2\")](https://i.stack.imgur.com/xe0Ev.jpg \"3D print showing stringing#2\")",
"brands so it does not seem to be caused by",
"my filament is new and stringing occurs with different brands",
"the nozzle heats up there is molten filament coming out",
"it does not seem to be caused by the filament.",
"stringing#1\") Retract test which shows the stringing: [![3D print showing",
"nothing seems to really work. All of my filament is",
"[![3D print showing stringing](https://i.stack.imgur.com/UOKTl.jpg \"3D print showing stringing#1\")](https://i.stack.imgur.com/UOKTl.jpg \"3D print",
"the stringing apart from taking the hotend apart? Retraction tower",
"heats up there is molten filament coming out of the",
"is not doing anything at all. Is there something I",
"stringing#1\")](https://i.stack.imgur.com/UOKTl.jpg \"3D print showing stringing#1\") Retract test which shows the",
"all. Is there something I can try to fix the",
"taking the hotend apart? Retraction tower with different retract-values: [![3D",
"\"3D print showing stringing#1\")](https://i.stack.imgur.com/UOKTl.jpg \"3D print showing stringing#1\") Retract test",
"apart from taking the hotend apart? Retraction tower with different",
"settings for retract distances and retraction speed but nothing seems",
"the stringing: [![3D print showing stringing#2](https://i.stack.imgur.com/xe0Ev.jpg \"3D print showing stringing#2\")](https://i.stack.imgur.com/xe0Ev.jpg",
"seems to really work. All of my filament is new",
"molten filament coming out of the nozzle even the extruder",
"print showing stringing#1\") Retract test which shows the stringing: [![3D",
"different retract-values: [![3D print showing stringing](https://i.stack.imgur.com/UOKTl.jpg \"3D print showing stringing#1\")](https://i.stack.imgur.com/UOKTl.jpg",
"nasty issue with stringing. I tried out several temperatures, settings",
"print showing stringing#1\")](https://i.stack.imgur.com/UOKTl.jpg \"3D print showing stringing#1\") Retract test which",
"but has a real nasty issue with stringing. I tried",
"to fix the stringing apart from taking the hotend apart?",
"nozzle even the extruder is not doing anything at all.",
"there something I can try to fix the stringing apart",
"a real nasty issue with stringing. I tried out several",
"When the nozzle heats up there is molten filament coming",
"at all. Is there something I can try to fix",
"not doing anything at all. Is there something I can",
"with stringing. I tried out several temperatures, settings for retract",
"is new and stringing occurs with different brands so it",
"I can try to fix the stringing apart from taking",
"the filament. When the nozzle heats up there is molten",
"does not seem to be caused by the filament. When",
"retraction speed but nothing seems to really work. All of",
"shows the stringing: [![3D print showing stringing#2](https://i.stack.imgur.com/xe0Ev.jpg \"3D print showing",
"to really work. All of my filament is new and",
"which prints overall not bad but has a real nasty",
"issue with stringing. I tried out several temperatures, settings for",
"All of my filament is new and stringing occurs with",
"with different brands so it does not seem to be",
"with different retract-values: [![3D print showing stringing](https://i.stack.imgur.com/UOKTl.jpg \"3D print showing",
"a Anycubic Vyper which prints overall not bad but has",
"anything at all. Is there something I can try to",
"try to fix the stringing apart from taking the hotend",
"so it does not seem to be caused by the",
"extruder is not doing anything at all. Is there something",
"of the nozzle even the extruder is not doing anything",
"stringing occurs with different brands so it does not seem",
"filament. When the nozzle heats up there is molten filament",
"coming out of the nozzle even the extruder is not",
"not bad but has a real nasty issue with stringing.",
"the extruder is not doing anything at all. Is there"
] |
[
"something I am doing incorrectly or is it a defect",
"I am doing incorrectly or is it a defect in",
"doing incorrectly or is it a defect in the unit?",
"Is this something I am doing incorrectly or is it",
"shut it down manually and then it picks off where",
"not allow me to do anything else except turn it",
"It started about one week ago and it just stops",
"stops with a constant beep and does not allow me",
"to do anything else except turn it off. Doesn't happen",
"must shut it down manually and then it picks off",
"started about one week ago and it just stops with",
"do anything else except turn it off. Doesn't happen on",
"it just stops with a constant beep and does not",
"but just loses its brain. It does save the printing",
"this something I am doing incorrectly or is it a",
"Amazon in December. It started about one week ago and",
"same thing. Printing a bonsai bowl and other things and",
"turn it off. Doesn't happen on all prints but just",
"other things and it goes to 0 °C. Is this",
"It does save the printing but I must shut it",
"just stops with a constant beep and does not allow",
"bonsai bowl and other things and it goes to 0",
"else except turn it off. Doesn't happen on all prints",
"and then it picks off where it left off but",
"purchased it new from Amazon in December. It started about",
"then it picks off where it left off but still",
"does the same thing. Printing a bonsai bowl and other",
"left off but still does the same thing. Printing a",
"Printing a bonsai bowl and other things and it goes",
"on all prints but just loses its brain. It does",
"and it goes to 0 °C. Is this something I",
"where it left off but still does the same thing.",
"and other things and it goes to 0 °C. Is",
"allow me to do anything else except turn it off.",
"December. It started about one week ago and it just",
"but I must shut it down manually and then it",
"things and it goes to 0 °C. Is this something",
"off but still does the same thing. Printing a bonsai",
"the same thing. Printing a bonsai bowl and other things",
"manually and then it picks off where it left off",
"prints but just loses its brain. It does save the",
"is it a defect in the unit? To me sounds",
"ago and it just stops with a constant beep and",
"to 0 °C. Is this something I am doing incorrectly",
"happen on all prints but just loses its brain. It",
"°C. Is this something I am doing incorrectly or is",
"from Amazon in December. It started about one week ago",
"beep and does not allow me to do anything else",
"off where it left off but still does the same",
"constant beep and does not allow me to do anything",
"I must shut it down manually and then it picks",
"it goes to 0 °C. Is this something I am",
"does not allow me to do anything else except turn",
"it picks off where it left off but still does",
"it left off but still does the same thing. Printing",
"just loses its brain. It does save the printing but",
"off. Doesn't happen on all prints but just loses its",
"about one week ago and it just stops with a",
"a constant beep and does not allow me to do",
"in December. It started about one week ago and it",
"loses its brain. It does save the printing but I",
"and does not allow me to do anything else except",
"defect in the unit? To me sounds like a defect.",
"brain. It does save the printing but I must shut",
"anything else except turn it off. Doesn't happen on all",
"down manually and then it picks off where it left",
"am doing incorrectly or is it a defect in the",
"it down manually and then it picks off where it",
"it a defect in the unit? To me sounds like",
"all prints but just loses its brain. It does save",
"one week ago and it just stops with a constant",
"new from Amazon in December. It started about one week",
"still does the same thing. Printing a bonsai bowl and",
"or is it a defect in the unit? To me",
"does save the printing but I must shut it down",
"week ago and it just stops with a constant beep",
"with a constant beep and does not allow me to",
"I purchased it new from Amazon in December. It started",
"me to do anything else except turn it off. Doesn't",
"0 °C. Is this something I am doing incorrectly or",
"a defect in the unit? To me sounds like a",
"the printing but I must shut it down manually and",
"thing. Printing a bonsai bowl and other things and it",
"Doesn't happen on all prints but just loses its brain.",
"picks off where it left off but still does the",
"it off. Doesn't happen on all prints but just loses",
"and it just stops with a constant beep and does",
"except turn it off. Doesn't happen on all prints but",
"goes to 0 °C. Is this something I am doing",
"bowl and other things and it goes to 0 °C.",
"its brain. It does save the printing but I must",
"it new from Amazon in December. It started about one",
"incorrectly or is it a defect in the unit? To",
"save the printing but I must shut it down manually",
"printing but I must shut it down manually and then",
"a bonsai bowl and other things and it goes to",
"but still does the same thing. Printing a bonsai bowl"
] |
[
"right angle piece with mounting screws and stepped sides. Which",
"or harm bed adhesion, will it have any substantial effect",
"Will it improve or harm bed adhesion, will it have",
"allow a laser cutter to be reliably positioned on a",
"weaker, or will it make warping more or less likely.",
"rounder corners make the print stronger or weaker, or will",
"improve or harm bed adhesion, will it have any substantial",
"model (Because it's what I'm most familiar with), and you",
"will rounder corners make the print stronger or weaker, or",
"with PLA and a 0.2 layer height. Because that's what",
"print or the printing process. For example will rounder corners",
"reasons have any practical effect on the print or the",
"bed adhesion, will it have any substantial effect on print",
"a 0.2 layer height. Because that's what I have on",
"reliably positioned on a waste board\\spoil board in that has",
"on it, and to allow a honeycomb bed to be",
"printing process. For example will rounder corners make the print",
"time they're used. It has a lot of corners, and",
"mounting screws and stepped sides. Which will be screwed down",
"in the same position each time they're used. It has",
"can be fixed to them in the same position each",
"to be reliably positioned within it in relation to the",
"screws and stepped sides. Which will be screwed down to",
"1.0 [](https://i.stack.imgur.com/mWPQx.png) I'm using an Ender 5",
"effect on the print or the printing process. For example",
"to spend any extra money on this. --- 1) *I'm",
"by a Brutalist architect. Will bevelling1) the corners for purely",
"piece with mounting screws and stepped sides. Which will be",
"I'm producing a series of brackets to allow a laser",
"or will it make warping more or less likely. Will",
"on this. --- 1) *I'm using the word \"bevel\" because",
"positioned on a waste board\\spoil board in that has a",
"Ender 5 with PLA and a 0.2 layer height. Because",
"make the print stronger or weaker, or will it make",
"allow a honeycomb bed to be reliably positioned within it",
"to a piece of timber so that things can be",
"here](https://i.stack.imgur.com/mWPQx.png)](https://i.stack.imgur.com/mWPQx.png) I'm using an Ender 5 with PLA and a",
"any extra money on this. --- 1) *I'm using the",
"height. Because that's what I have on my shelf right",
"position each time they're used. It has a lot of",
"my shelf right now, and I don't want to spend",
"substantial effect on print time or quality? Version 1.0 [](https://i.stack.imgur.com/mWPQx.png) I'm using an Ender 5 with PLA",
"likely. Will it improve or harm bed adhesion, will it",
"0.2 layer height. Because that's what I have on my",
"on the print or the printing process. For example will",
"quality? Version 1.0 [](https://i.stack.imgur.com/mWPQx.png) I'm using an",
"corners for purely aesthetic reasons have any practical effect on",
"screwed down to a piece of timber so that things",
"things can be fixed to them in the same position",
"of corners, and 90° angles, and it looks like it",
"the word \"bevel\" because I'm using Blender to make the",
"adhesion, will it have any substantial effect on print time",
"the laser cutter. Essentially, I'm making 4 large right angle",
"corners, and 90° angles, and it looks like it was",
"them in the same position each time they're used. It",
"purely aesthetic reasons have any practical effect on the print",
"spend any extra money on this. --- 1) *I'm using",
"have any substantial effect on print time or quality? Version",
"with mounting screws and stepped sides. Which will be screwed",
"they're used. It has a lot of corners, and 90°",
"bed to be reliably positioned within it in relation to",
"or quality? Version 1.0 [](https://i.stack.imgur.com/mWPQx.png) I'm using",
"word \"bevel\" because I'm using Blender to make the model",
"what I have on my shelf right now, and I",
"and to allow a honeycomb bed to be reliably positioned",
"--- 1) *I'm using the word \"bevel\" because I'm using",
"a honeycomb bed to be reliably positioned within it in",
"the model (Because it's what I'm most familiar with), and",
"extra money on this. --- 1) *I'm using the word",
"to allow a honeycomb bed to be reliably positioned within",
"looks like it was designed by a Brutalist architect. Will",
"time or quality? Version 1.0 [](https://i.stack.imgur.com/mWPQx.png) I'm",
"or weaker, or will it make warping more or less",
"grid on it, and to allow a honeycomb bed to",
"harm bed adhesion, will it have any substantial effect on",
"I don't want to spend any extra money on this.",
"down to a piece of timber so that things can",
"a waste board\\spoil board in that has a measurement grid",
"within it in relation to the laser cutter. Essentially, I'm",
"an Ender 5 with PLA and a 0.2 layer height.",
"and 90° angles, and it looks like it was designed",
"have any practical effect on the print or the printing",
"Blender to make the model (Because it's what I'm most",
"in relation to the laser cutter. Essentially, I'm making 4",
"right now, and I don't want to spend any extra",
"you create rounded edges using the Bevel tool in Blender.*",
"I'm most familiar with), and you create rounded edges using",
"It has a lot of corners, and 90° angles, and",
"or the printing process. For example will rounder corners make",
"what I'm most familiar with), and you create rounded edges",
"*I'm using the word \"bevel\" because I'm using Blender to",
"print time or quality? Version 1.0 [](https://i.stack.imgur.com/mWPQx.png)",
"lot of corners, and 90° angles, and it looks like",
"to make the model (Because it's what I'm most familiar",
"to the laser cutter. Essentially, I'm making 4 large right",
"cutter to be reliably positioned on a waste board\\spoil board",
"reliably positioned within it in relation to the laser cutter.",
"cutter. Essentially, I'm making 4 large right angle piece with",
"the same position each time they're used. It has a",
"the printing process. For example will rounder corners make the",
"to be reliably positioned on a waste board\\spoil board in",
"Version 1.0 [](https://i.stack.imgur.com/mWPQx.png) I'm using an Ender",
"sides. Which will be screwed down to a piece of",
"I have on my shelf right now, and I don't",
"laser cutter to be reliably positioned on a waste board\\spoil",
"using the word \"bevel\" because I'm using Blender to make",
"has a lot of corners, and 90° angles, and it",
"1) *I'm using the word \"bevel\" because I'm using Blender",
"Which will be screwed down to a piece of timber",
"\"bevel\" because I'm using Blender to make the model (Because",
"90° angles, and it looks like it was designed by",
"on my shelf right now, and I don't want to",
"of timber so that things can be fixed to them",
"familiar with), and you create rounded edges using the Bevel",
"timber so that things can be fixed to them in",
"layer height. Because that's what I have on my shelf",
"that has a measurement grid on it, and to allow",
"producing a series of brackets to allow a laser cutter",
"most familiar with), and you create rounded edges using the",
"it was designed by a Brutalist architect. Will bevelling1) the",
"print stronger or weaker, or will it make warping more",
"waste board\\spoil board in that has a measurement grid on",
"and a 0.2 layer height. Because that's what I have",
"brackets to allow a laser cutter to be reliably positioned",
"the corners for purely aesthetic reasons have any practical effect",
"architect. Will bevelling1) the corners for purely aesthetic reasons have",
"Will bevelling1) the corners for purely aesthetic reasons have any",
"a piece of timber so that things can be fixed",
"effect on print time or quality? Version 1.0 [](https://i.stack.imgur.com/mWPQx.png) I'm using an Ender 5 with PLA and",
"that things can be fixed to them in the same",
"that's what I have on my shelf right now, and",
"will it make warping more or less likely. Will it",
"of brackets to allow a laser cutter to be reliably",
"laser cutter. Essentially, I'm making 4 large right angle piece",
"same position each time they're used. It has a lot",
"have on my shelf right now, and I don't want",
"don't want to spend any extra money on this. ---",
"each time they're used. It has a lot of corners,",
"large right angle piece with mounting screws and stepped sides.",
"so that things can be fixed to them in the",
"board\\spoil board in that has a measurement grid on it,",
"and it looks like it was designed by a Brutalist",
"Essentially, I'm making 4 large right angle piece with mounting",
"I'm using Blender to make the model (Because it's what",
"PLA and a 0.2 layer height. Because that's what I",
"it make warping more or less likely. Will it improve",
"angle piece with mounting screws and stepped sides. Which will",
"and stepped sides. Which will be screwed down to a",
"positioned within it in relation to the laser cutter. Essentially,",
"bevelling1) the corners for purely aesthetic reasons have any practical",
"it's what I'm most familiar with), and you create rounded",
"any practical effect on the print or the printing process.",
"money on this. --- 1) *I'm using the word \"bevel\"",
"this. --- 1) *I'm using the word \"bevel\" because I'm",
"Because that's what I have on my shelf right now,",
"want to spend any extra money on this. --- 1)",
"because I'm using Blender to make the model (Because it's",
"aesthetic reasons have any practical effect on the print or",
"or less likely. Will it improve or harm bed adhesion,",
"will it have any substantial effect on print time or",
"honeycomb bed to be reliably positioned within it in relation",
"shelf right now, and I don't want to spend any",
"make the model (Because it's what I'm most familiar with),",
"Brutalist architect. Will bevelling1) the corners for purely aesthetic reasons",
"it improve or harm bed adhesion, will it have any",
"and you create rounded edges using the Bevel tool in",
"[](https://i.stack.imgur.com/mWPQx.png) I'm using an Ender 5 with",
"be fixed to them in the same position each time",
"board in that has a measurement grid on it, and",
"a laser cutter to be reliably positioned on a waste",
"with), and you create rounded edges using the Bevel tool",
"used. It has a lot of corners, and 90° angles,",
"it, and to allow a honeycomb bed to be reliably",
"For example will rounder corners make the print stronger or",
"process. For example will rounder corners make the print stronger",
"I'm using an Ender 5 with PLA and a 0.2",
"measurement grid on it, and to allow a honeycomb bed",
"making 4 large right angle piece with mounting screws and",
"more or less likely. Will it improve or harm bed",
"angles, and it looks like it was designed by a",
"stepped sides. Which will be screwed down to a piece",
"designed by a Brutalist architect. Will bevelling1) the corners for",
"to allow a laser cutter to be reliably positioned on",
"on print time or quality? Version 1.0 [![enter image description",
"and I don't want to spend any extra money on",
"a measurement grid on it, and to allow a honeycomb",
"be reliably positioned within it in relation to the laser",
"4 large right angle piece with mounting screws and stepped",
"5 with PLA and a 0.2 layer height. Because that's",
"like it was designed by a Brutalist architect. Will bevelling1)",
"relation to the laser cutter. Essentially, I'm making 4 large"
] |
[
"it works as expected. But how am I able to",
"9-step probes so I can view them in a mesh",
"from the BLTouch probing on my Ender 3? I have",
"BLTouch fine and it works as expected. But how am",
"Ender 3? I have set up all the firmware and",
"results from the BLTouch probing on my Ender 3? I",
"in a mesh visualiser? I don’t have an OctoPrint print",
"I don’t have an OctoPrint print server, as I know",
"to see the results of the `G29` 9-step probes so",
"on my Ender 3? I have set up all the",
"How do I view the results from the BLTouch probing",
"my Ender 3? I have set up all the firmware",
"the firmware and installed the BLTouch fine and it works",
"them in a mesh visualiser? I don’t have an OctoPrint",
"expected. But how am I able to see the results",
"But how am I able to see the results of",
"print server, as I know this comes with a Plug-in.",
"view them in a mesh visualiser? I don’t have an",
"so I can view them in a mesh visualiser? I",
"able to see the results of the `G29` 9-step probes",
"the results of the `G29` 9-step probes so I can",
"I have set up all the firmware and installed the",
"don’t have an OctoPrint print server, as I know this",
"I view the results from the BLTouch probing on my",
"visualiser? I don’t have an OctoPrint print server, as I",
"a mesh visualiser? I don’t have an OctoPrint print server,",
"as expected. But how am I able to see the",
"am I able to see the results of the `G29`",
"can view them in a mesh visualiser? I don’t have",
"results of the `G29` 9-step probes so I can view",
"set up all the firmware and installed the BLTouch fine",
"3? I have set up all the firmware and installed",
"do I view the results from the BLTouch probing on",
"all the firmware and installed the BLTouch fine and it",
"have set up all the firmware and installed the BLTouch",
"see the results of the `G29` 9-step probes so I",
"`G29` 9-step probes so I can view them in a",
"probing on my Ender 3? I have set up all",
"installed the BLTouch fine and it works as expected. But",
"OctoPrint print server, as I know this comes with a",
"firmware and installed the BLTouch fine and it works as",
"the `G29` 9-step probes so I can view them in",
"up all the firmware and installed the BLTouch fine and",
"I can view them in a mesh visualiser? I don’t",
"mesh visualiser? I don’t have an OctoPrint print server, as",
"of the `G29` 9-step probes so I can view them",
"the BLTouch probing on my Ender 3? I have set",
"the results from the BLTouch probing on my Ender 3?",
"probes so I can view them in a mesh visualiser?",
"I able to see the results of the `G29` 9-step",
"the BLTouch fine and it works as expected. But how",
"how am I able to see the results of the",
"an OctoPrint print server, as I know this comes with",
"and installed the BLTouch fine and it works as expected.",
"fine and it works as expected. But how am I",
"works as expected. But how am I able to see",
"have an OctoPrint print server, as I know this comes",
"and it works as expected. But how am I able",
"BLTouch probing on my Ender 3? I have set up",
"view the results from the BLTouch probing on my Ender"
] |
[
"with my Ender 3 S1 running Klipper firmware. After that",
"completely. I thought it might be a problem with Klipper,",
"and forth rapidly. After the prime line, it stopped completely.",
"started wiggling back and forth rapidly. After the prime line,",
"successful print before this incident with my Ender 3 S1",
"rapidly. After the prime line, it stopped completely. I thought",
"back and forth rapidly. After the prime line, it stopped",
"motor started wiggling back and forth rapidly. After the prime",
"print before this incident with my Ender 3 S1 running",
"before this incident with my Ender 3 S1 running Klipper",
"Ender 3 S1 running Klipper firmware. After that print, it",
"print, it started not extruding. Well, the motor started wiggling",
"line, it stopped completely. I thought it might be a",
"used a different slicer too. But it is still there.",
"thought it might be a problem with Klipper, so I",
"stopped completely. I thought it might be a problem with",
"Klipper, so I switched back to stock firmware and used",
"back to stock firmware and used a different slicer too.",
"to stock firmware and used a different slicer too. But",
"I thought it might be a problem with Klipper, so",
"prime line, it stopped completely. I thought it might be",
"different slicer too. But it is still there. I uploaded",
"not extruding. Well, the motor started wiggling back and forth",
"the motor started wiggling back and forth rapidly. After the",
"stock firmware and used a different slicer too. But it",
"After that print, it started not extruding. Well, the motor",
"it might be a problem with Klipper, so I switched",
"After the prime line, it stopped completely. I thought it",
"started not extruding. Well, the motor started wiggling back and",
"and used a different slicer too. But it is still",
"with Klipper, so I switched back to stock firmware and",
"incident with my Ender 3 S1 running Klipper firmware. After",
"extruding. Well, the motor started wiggling back and forth rapidly.",
"a different slicer too. But it is still there. I",
"I switched back to stock firmware and used a different",
"so I switched back to stock firmware and used a",
"a successful print before this incident with my Ender 3",
"my Ender 3 S1 running Klipper firmware. After that print,",
"problem with Klipper, so I switched back to stock firmware",
"too. But it is still there. I uploaded a video",
"there. I uploaded a video of it to YouTube: <https://youtube.com/shorts/q-ZLMg6NHng>",
"it is still there. I uploaded a video of it",
"Klipper firmware. After that print, it started not extruding. Well,",
"I made a successful print before this incident with my",
"the prime line, it stopped completely. I thought it might",
"switched back to stock firmware and used a different slicer",
"running Klipper firmware. After that print, it started not extruding.",
"forth rapidly. After the prime line, it stopped completely. I",
"might be a problem with Klipper, so I switched back",
"slicer too. But it is still there. I uploaded a",
"be a problem with Klipper, so I switched back to",
"it stopped completely. I thought it might be a problem",
"this incident with my Ender 3 S1 running Klipper firmware.",
"made a successful print before this incident with my Ender",
"a problem with Klipper, so I switched back to stock",
"firmware and used a different slicer too. But it is",
"wiggling back and forth rapidly. After the prime line, it",
"S1 running Klipper firmware. After that print, it started not",
"still there. I uploaded a video of it to YouTube:",
"firmware. After that print, it started not extruding. Well, the",
"3 S1 running Klipper firmware. After that print, it started",
"it started not extruding. Well, the motor started wiggling back",
"is still there. I uploaded a video of it to",
"that print, it started not extruding. Well, the motor started",
"Well, the motor started wiggling back and forth rapidly. After",
"But it is still there. I uploaded a video of"
] |
[
"actually just have done that. And by trying to move",
"H2 V2. Nothing is out for the Neo version yet",
"marked with T8 and it is using the TMC2208 driver.",
"it is using the TMC2208 driver. I have checked my",
"I have set the Vrefs to around 1.05 V. The",
"Biqu finally started extruding when I adjusted the X value.",
"I took out my stepper motor cable from the Biqu",
"my X-axis, and then the Biqu finally started extruding when",
"my own doing... I will buy a new one and",
"an Ender 3 Pro mount to make things work. Everything",
"things work. Everything is now mounted and looks awesome. But,",
"that. And by trying to move the x-axis with the",
"am using Marlin firmware. My mainboard is marked with T8",
"extrude. I have set the Vrefs to around 1.05 V.",
"had worked on the board with the power ON i",
"question on if i had worked on the board with",
"and there is good connection with the main board. I",
"awesome. But, the new extruder won't extrude. I have set",
"will buy a new one and let you guys know!!",
"stepper cable and there is good connection with the main",
"The E-steps are set to 932 using Pronterface. I am",
"is now mounted and looks awesome. But, the new extruder",
"adapters and such - so I have modified an Ender",
"V2. Nothing is out for the Neo version yet -",
"the Vrefs to around 1.05 V. The E-steps are set",
"around 1.05 V. The E-steps are set to 932 using",
"took out my stepper motor cable from the Biqu and",
"upgrade to the direct extruder Biqu H2 V2. Nothing is",
"extruder Biqu H2 V2. Nothing is out for the Neo",
"toasted? Or could the E-stepper driver be possibly dead? Anyone",
"Ender 3 V2 Neo these days. Gotten to upgrade to",
"with T8 and it is using the TMC2208 driver. I",
"driver be possibly dead? Anyone with good ideas? After a",
"Ender 3 Pro mount to make things work. Everything is",
"extruder won't extrude. I have set the Vrefs to around",
"Marlin firmware. My mainboard is marked with T8 and it",
"my Ender 3 V2 Neo these days. Gotten to upgrade",
"E-steps are set to 932 using Pronterface. I am using",
"looks awesome. But, the new extruder won't extrude. I have",
"Pro mount to make things work. Everything is now mounted",
"ideas? After a good question on if i had worked",
"myself and thought; damn, i actually just have done that.",
"Neo these days. Gotten to upgrade to the direct extruder",
"power ON i went into myself and thought; damn, i",
"with good ideas? After a good question on if i",
"driver is dead by my own doing... I will buy",
"main board. I took out my stepper motor cable from",
"when I adjusted the X value. So I'm kind of",
"I adjusted the X value. So I'm kind of puzzled",
"the power ON i went into myself and thought; damn,",
"Biqu and tried with the stepper motor cable from my",
"cable from the Biqu and tried with the stepper motor",
"motor cable from the Biqu and tried with the stepper",
"with the steppermotor just to have NOTHING happen... i think",
"Nothing is out for the Neo version yet - like",
"to around 1.05 V. The E-steps are set to 932",
"into myself and thought; damn, i actually just have done",
"- so I have modified an Ender 3 Pro mount",
"and looks awesome. But, the new extruder won't extrude. I",
"Is my mainboard toasted? Or could the E-stepper driver be",
"cable from my X-axis, and then the Biqu finally started",
"using Pronterface. I am using Marlin firmware. My mainboard is",
"and it is using the TMC2208 driver. I have checked",
"steppermotor driver is dead by my own doing... I will",
"thought; damn, i actually just have done that. And by",
"and such - so I have modified an Ender 3",
"by my own doing... I will buy a new one",
"just to have NOTHING happen... i think my steppermotor driver",
"such - so I have modified an Ender 3 Pro",
"using the TMC2208 driver. I have checked my stepper cable",
"won't extrude. I have set the Vrefs to around 1.05",
"mainboard is marked with T8 and it is using the",
"these days. Gotten to upgrade to the direct extruder Biqu",
"set the Vrefs to around 1.05 V. The E-steps are",
"days. Gotten to upgrade to the direct extruder Biqu H2",
"for the Neo version yet - like adapters and such",
"issue?! Is my mainboard toasted? Or could the E-stepper driver",
"is good connection with the main board. I took out",
"my stepper motor cable from the Biqu and tried with",
"good question on if i had worked on the board",
"connection with the main board. I took out my stepper",
"the direct extruder Biqu H2 V2. Nothing is out for",
"After a good question on if i had worked on",
"with my Ender 3 V2 Neo these days. Gotten to",
"the board with the power ON i went into myself",
"1.05 V. The E-steps are set to 932 using Pronterface.",
"from the Biqu and tried with the stepper motor cable",
"this issue?! Is my mainboard toasted? Or could the E-stepper",
"could the E-stepper driver be possibly dead? Anyone with good",
"Anyone with good ideas? After a good question on if",
"My mainboard is marked with T8 and it is using",
"like adapters and such - so I have modified an",
"my mainboard toasted? Or could the E-stepper driver be possibly",
"the stepper motor cable from my X-axis, and then the",
"by trying to move the x-axis with the steppermotor just",
"the X value. So I'm kind of puzzled of this",
"doing something special with my Ender 3 V2 Neo these",
"on if i had worked on the board with the",
"my steppermotor driver is dead by my own doing... I",
"But, the new extruder won't extrude. I have set the",
"started extruding when I adjusted the X value. So I'm",
"3 V2 Neo these days. Gotten to upgrade to the",
"the x-axis with the steppermotor just to have NOTHING happen...",
"Gotten to upgrade to the direct extruder Biqu H2 V2.",
"the main board. I took out my stepper motor cable",
"so I have modified an Ender 3 Pro mount to",
"of puzzled of this issue?! Is my mainboard toasted? Or",
"happen... i think my steppermotor driver is dead by my",
"T8 and it is using the TMC2208 driver. I have",
"X value. So I'm kind of puzzled of this issue?!",
"firmware. My mainboard is marked with T8 and it is",
"new extruder won't extrude. I have set the Vrefs to",
"extruding when I adjusted the X value. So I'm kind",
"3 Pro mount to make things work. Everything is now",
"ON i went into myself and thought; damn, i actually",
"I will buy a new one and let you guys",
"mount to make things work. Everything is now mounted and",
"I'm doing something special with my Ender 3 V2 Neo",
"out my stepper motor cable from the Biqu and tried",
"tried with the stepper motor cable from my X-axis, and",
"finally started extruding when I adjusted the X value. So",
"is marked with T8 and it is using the TMC2208",
"done that. And by trying to move the x-axis with",
"have set the Vrefs to around 1.05 V. The E-steps",
"the Neo version yet - like adapters and such -",
"version yet - like adapters and such - so I",
"stepper motor cable from the Biqu and tried with the",
"- like adapters and such - so I have modified",
"i had worked on the board with the power ON",
"puzzled of this issue?! Is my mainboard toasted? Or could",
"direct extruder Biqu H2 V2. Nothing is out for the",
"to 932 using Pronterface. I am using Marlin firmware. My",
"I have checked my stepper cable and there is good",
"is dead by my own doing... I will buy a",
"i actually just have done that. And by trying to",
"to upgrade to the direct extruder Biqu H2 V2. Nothing",
"cable and there is good connection with the main board.",
"have done that. And by trying to move the x-axis",
"932 using Pronterface. I am using Marlin firmware. My mainboard",
"and then the Biqu finally started extruding when I adjusted",
"driver. I have checked my stepper cable and there is",
"stepper motor cable from my X-axis, and then the Biqu",
"own doing... I will buy a new one and let",
"steppermotor just to have NOTHING happen... i think my steppermotor",
"something special with my Ender 3 V2 Neo these days.",
"mainboard toasted? Or could the E-stepper driver be possibly dead?",
"adjusted the X value. So I'm kind of puzzled of",
"be possibly dead? Anyone with good ideas? After a good",
"I'm kind of puzzled of this issue?! Is my mainboard",
"Biqu H2 V2. Nothing is out for the Neo version",
"now mounted and looks awesome. But, the new extruder won't",
"value. So I'm kind of puzzled of this issue?! Is",
"mounted and looks awesome. But, the new extruder won't extrude.",
"I am using Marlin firmware. My mainboard is marked with",
"TMC2208 driver. I have checked my stepper cable and there",
"damn, i actually just have done that. And by trying",
"to have NOTHING happen... i think my steppermotor driver is",
"Everything is now mounted and looks awesome. But, the new",
"good ideas? After a good question on if i had",
"with the main board. I took out my stepper motor",
"So I'm kind of puzzled of this issue?! Is my",
"i think my steppermotor driver is dead by my own",
"just have done that. And by trying to move the",
"move the x-axis with the steppermotor just to have NOTHING",
"think my steppermotor driver is dead by my own doing...",
"doing... I will buy a new one and let you",
"checked my stepper cable and there is good connection with",
"the new extruder won't extrude. I have set the Vrefs",
"special with my Ender 3 V2 Neo these days. Gotten",
"dead by my own doing... I will buy a new",
"of this issue?! Is my mainboard toasted? Or could the",
"to move the x-axis with the steppermotor just to have",
"to make things work. Everything is now mounted and looks",
"dead? Anyone with good ideas? After a good question on",
"motor cable from my X-axis, and then the Biqu finally",
"there is good connection with the main board. I took",
"the E-stepper driver be possibly dead? Anyone with good ideas?",
"X-axis, and then the Biqu finally started extruding when I",
"yet - like adapters and such - so I have",
"with the power ON i went into myself and thought;",
"V2 Neo these days. Gotten to upgrade to the direct",
"trying to move the x-axis with the steppermotor just to",
"out for the Neo version yet - like adapters and",
"worked on the board with the power ON i went",
"the steppermotor just to have NOTHING happen... i think my",
"And by trying to move the x-axis with the steppermotor",
"NOTHING happen... i think my steppermotor driver is dead by",
"are set to 932 using Pronterface. I am using Marlin",
"Neo version yet - like adapters and such - so",
"my stepper cable and there is good connection with the",
"modified an Ender 3 Pro mount to make things work.",
"V. The E-steps are set to 932 using Pronterface. I",
"from my X-axis, and then the Biqu finally started extruding",
"Or could the E-stepper driver be possibly dead? Anyone with",
"x-axis with the steppermotor just to have NOTHING happen... i",
"board. I took out my stepper motor cable from the",
"work. Everything is now mounted and looks awesome. But, the",
"a good question on if i had worked on the",
"possibly dead? Anyone with good ideas? After a good question",
"and thought; damn, i actually just have done that. And",
"is out for the Neo version yet - like adapters",
"i went into myself and thought; damn, i actually just",
"using Marlin firmware. My mainboard is marked with T8 and",
"set to 932 using Pronterface. I am using Marlin firmware.",
"Pronterface. I am using Marlin firmware. My mainboard is marked",
"and tried with the stepper motor cable from my X-axis,",
"board with the power ON i went into myself and",
"if i had worked on the board with the power",
"Vrefs to around 1.05 V. The E-steps are set to",
"went into myself and thought; damn, i actually just have",
"the TMC2208 driver. I have checked my stepper cable and",
"have checked my stepper cable and there is good connection",
"have modified an Ender 3 Pro mount to make things",
"with the stepper motor cable from my X-axis, and then",
"to the direct extruder Biqu H2 V2. Nothing is out",
"I have modified an Ender 3 Pro mount to make",
"is using the TMC2208 driver. I have checked my stepper",
"E-stepper driver be possibly dead? Anyone with good ideas? After",
"the Biqu finally started extruding when I adjusted the X",
"the Biqu and tried with the stepper motor cable from",
"then the Biqu finally started extruding when I adjusted the",
"make things work. Everything is now mounted and looks awesome.",
"kind of puzzled of this issue?! Is my mainboard toasted?",
"have NOTHING happen... i think my steppermotor driver is dead",
"good connection with the main board. I took out my",
"on the board with the power ON i went into"
] |
[
"8mm. I think it shifted again by about 1mm after",
"the direction the extruder head moves. I printed on the",
"be shifted about 8mm? I have a new Elegoo Neptune",
"think it shifted again by about 1mm after 1 layer.",
"to be shifted about 8mm? I have a new Elegoo",
"shifted - the direction the bed slides or the direction",
"1 layer. The rest of the print is perfect. Unfortunately,",
"I took note of which direction the print was on",
"print is perfect. Unfortunately, I pulled the print off and",
"approximately 3 layers, the print shifted by about 8mm. I",
"new Elegoo Neptune 3 Pro (which is doing an awesome",
"direction the extruder head moves. I printed on the normal",
"by about 1mm after 1 layer. The rest of the",
"Chest Puzzle Box](https://www.thingiverse.com/thing:5414034) overnight, and this morning it looked pretty",
"tell me what would cause an entire print to be",
"this [Treasure Chest Puzzle Box](https://www.thingiverse.com/thing:5414034) overnight, and this morning it",
"Puzzle Box](https://www.thingiverse.com/thing:5414034) overnight, and this morning it looked pretty good",
"off and closed my Cura file before I took note",
"is doing an awesome job so far!). I started printing",
"I don't know which dimension was shifted - the direction",
"Pro (which is doing an awesome job so far!). I",
"and closed my Cura file before I took note of",
"the print was on the bed, so I don't know",
"note of which direction the print was on the bed,",
"head moves. I printed on the normal Cura profile. Thanks.",
"The rest of the print is perfect. Unfortunately, I pulled",
"I pulled the print off and closed my Cura file",
"on the bed, so I don't know which dimension was",
"that after approximately 3 layers, the print shifted by about",
"I started printing this [Treasure Chest Puzzle Box](https://www.thingiverse.com/thing:5414034) overnight, and",
"the extruder head moves. I printed on the normal Cura",
"again by about 1mm after 1 layer. The rest of",
"started printing this [Treasure Chest Puzzle Box](https://www.thingiverse.com/thing:5414034) overnight, and this",
"know which dimension was shifted - the direction the bed",
"the direction the bed slides or the direction the extruder",
"until I noticed that after approximately 3 layers, the print",
"entire print to be shifted about 8mm? I have a",
"cause an entire print to be shifted about 8mm? I",
"the bed, so I don't know which dimension was shifted",
"morning it looked pretty good until I noticed that after",
"extruder head moves. I printed on the normal Cura profile.",
"the print is perfect. Unfortunately, I pulled the print off",
"shifted again by about 1mm after 1 layer. The rest",
"doing an awesome job so far!). I started printing this",
"took note of which direction the print was on the",
"Box](https://www.thingiverse.com/thing:5414034) overnight, and this morning it looked pretty good until",
"job so far!). I started printing this [Treasure Chest Puzzle",
"Elegoo Neptune 3 Pro (which is doing an awesome job",
"noticed that after approximately 3 layers, the print shifted by",
"printing this [Treasure Chest Puzzle Box](https://www.thingiverse.com/thing:5414034) overnight, and this morning",
"the print off and closed my Cura file before I",
"Unfortunately, I pulled the print off and closed my Cura",
"would cause an entire print to be shifted about 8mm?",
"file before I took note of which direction the print",
"of the print is perfect. Unfortunately, I pulled the print",
"about 8mm. I think it shifted again by about 1mm",
"slides or the direction the extruder head moves. I printed",
"print shifted by about 8mm. I think it shifted again",
"my Cura file before I took note of which direction",
"shifted by about 8mm. I think it shifted again by",
"by about 8mm. I think it shifted again by about",
"of which direction the print was on the bed, so",
"far!). I started printing this [Treasure Chest Puzzle Box](https://www.thingiverse.com/thing:5414034) overnight,",
"3 layers, the print shifted by about 8mm. I think",
"was on the bed, so I don't know which dimension",
"this morning it looked pretty good until I noticed that",
"so I don't know which dimension was shifted - the",
"after approximately 3 layers, the print shifted by about 8mm.",
"what would cause an entire print to be shifted about",
"good until I noticed that after approximately 3 layers, the",
"don't know which dimension was shifted - the direction the",
"direction the print was on the bed, so I don't",
"- the direction the bed slides or the direction the",
"before I took note of which direction the print was",
"3 Pro (which is doing an awesome job so far!).",
"the print shifted by about 8mm. I think it shifted",
"I have a new Elegoo Neptune 3 Pro (which is",
"a new Elegoo Neptune 3 Pro (which is doing an",
"layers, the print shifted by about 8mm. I think it",
"I noticed that after approximately 3 layers, the print shifted",
"perfect. Unfortunately, I pulled the print off and closed my",
"it looked pretty good until I noticed that after approximately",
"I printed on the normal Cura profile. Thanks. [](https://i.stack.imgur.com/GdXue.png)",
"after 1 layer. The rest of the print is perfect.",
"was shifted - the direction the bed slides or the",
"about 1mm after 1 layer. The rest of the print",
"me what would cause an entire print to be shifted",
"moves. I printed on the normal Cura profile. Thanks. [ overnight, and this morning it looked",
"pretty good until I noticed that after approximately 3 layers,",
"print was on the bed, so I don't know which",
"which direction the print was on the bed, so I",
"Cura file before I took note of which direction the",
"is perfect. Unfortunately, I pulled the print off and closed",
"Can anyone tell me what would cause an entire print",
"or the direction the extruder head moves. I printed on",
"pulled the print off and closed my Cura file before",
"1mm after 1 layer. The rest of the print is",
"dimension was shifted - the direction the bed slides or",
"I think it shifted again by about 1mm after 1",
"an awesome job so far!). I started printing this [Treasure",
"have a new Elegoo Neptune 3 Pro (which is doing",
"rest of the print is perfect. Unfortunately, I pulled the",
"bed slides or the direction the extruder head moves. I",
"the bed slides or the direction the extruder head moves.",
"and this morning it looked pretty good until I noticed",
"it shifted again by about 1mm after 1 layer. The",
"so far!). I started printing this [Treasure Chest Puzzle Box](https://www.thingiverse.com/thing:5414034)",
"bed, so I don't know which dimension was shifted -",
"shifted about 8mm? I have a new Elegoo Neptune 3",
"closed my Cura file before I took note of which",
"8mm? I have a new Elegoo Neptune 3 Pro (which",
"overnight, and this morning it looked pretty good until I",
"print to be shifted about 8mm? I have a new",
"Neptune 3 Pro (which is doing an awesome job so",
"layer. The rest of the print is perfect. Unfortunately, I",
"which dimension was shifted - the direction the bed slides",
"awesome job so far!). I started printing this [Treasure Chest",
"(which is doing an awesome job so far!). I started"
] |
[
"installed the CR Touch and I am having print issue",
"; infer the rest of the mesh values again @BEDLEVELVISUALIZER",
"3 v1 * Board: Creality 4.2.7 * Firmware: Marlin 2.1.2",
"ran through to generate the mesh: ``` G28 ; home",
"bed leveling while probing, if firmware is set ; to",
"all axes M420 S0 ; Turning off bed leveling while",
"; Save UBL mesh points to slot 0 (EEPROM). G29",
"not UBL manual) to the best of my ability. *",
"the mesh: ``` G28 ; home all axes M420 S0",
"for reported mesh M420 S1 V ; enabled leveling and",
"; Set Fade Height for correction at 10.0 mm. G29",
"setup to EEPROM M155 S3 ; reset temperature reporting M140",
"values again @BEDLEVELVISUALIZER ; tell the plugin to watch for",
"get through 44 of the 100 touchpoints Here is the",
"at 10.0 mm. G29 A ; Activate the UBL System.",
"* Ender 3 v1 * Board: Creality 4.2.7 * Firmware:",
"slot 0 (EEPROM). G29 F 10.0 ; Set Fade Height",
"having print issue after print issue with larger prints despite",
"M155 S30 ; reduce temperature reporting rate to reduce output",
"shows an issue - I just don't know how to",
"of the bed mesh](https://i.stack.imgur.com/mbfEP.png \"Screenshot of the bed mesh\")](https://i.stack.imgur.com/mbfEP.png \"Screenshot",
"I've been getting deeper and deeper down the rabbit hole",
"G29 F 10.0 ; Set Fade Height for correction at",
"G29 P1 ; automatically populate mesh with all reachable points",
"the bed mesh](https://i.stack.imgur.com/mbfEP.png \"Screenshot of the bed mesh\")](https://i.stack.imgur.com/mbfEP.png \"Screenshot of",
"G28 M155 S30 ; reduce temperature reporting rate to reduce",
"only get through 44 of the 100 touchpoints Here is",
"; (optional) wait for the bed to get up to",
"of my ability. * Ender 3 v1 * Board: Creality",
"of the bed mesh\")](https://i.stack.imgur.com/mbfEP.png \"Screenshot of the bed mesh\") Of",
"while probing, if firmware is set ; to restore after",
"S1 V ; enabled leveling and report the new mesh",
"to reduce output pollution M190 S65 ; (optional) wait for",
"to slot 0 (EEPROM). G29 F 10.0 ; Set Fade",
"for correction at 10.0 mm. G29 A ; Activate the",
"``` G28 ; home all axes M420 S0 ; Turning",
"I ran through to generate the mesh: ``` G28 ;",
"infer the rest of the mesh values again @BEDLEVELVISUALIZER ;",
"deeper and deeper down the rabbit hole of UBL and",
"Ender 3 v1 * Board: Creality 4.2.7 * Firmware: Marlin",
"through 44 of the 100 touchpoints Here is the code",
"am losing my mind! Just installed the CR Touch and",
"reduce output pollution M190 S65 ; (optional) wait for the",
"tell the plugin to watch for reported mesh M420 S1",
"the rabbit hole of UBL and I am losing my",
"M420 S0 ; Turning off bed leveling while probing, if",
"plugin to watch for reported mesh M420 S1 V ;",
"Firmware config: [`configuration.h`](https://www.dropbox.com/s/5bveiho4uh21iea/Configuration.h?dl=0) * Hotend: Creality Direct Drive Sprite Pro",
"the rest of the mesh values G29 P3 ; infer",
"print issue after print issue with larger prints despite manually",
"hole of UBL and I am losing my mind! Just",
"all reachable points G29 P3 ; infer the rest of",
"EEPROM M155 S3 ; reset temperature reporting M140 S0 ;",
"issue with larger prints despite manually leveling the bed (bed",
"after print issue with larger prints despite manually leveling the",
"temperature reporting M140 S0 ; cooling down the bed ```",
"; save the current setup to EEPROM M155 S3 ;",
"will only get through 44 of the 100 touchpoints Here",
"is the code I ran through to generate the mesh:",
"F 10.0 ; Set Fade Height for correction at 10.0",
"G29 P3 ; infer the rest of the mesh values",
"Sensor: CR Touch The height map clearly shows an issue",
"leveling the bed (bed adjustment not UBL manual) to the",
"the bed mesh\")](https://i.stack.imgur.com/mbfEP.png \"Screenshot of the bed mesh\") Of note",
"0 (EEPROM). G29 F 10.0 ; Set Fade Height for",
"I am losing my mind! Just installed the CR Touch",
"Activate the UBL System. M500 ; save the current setup",
"manually leveling the bed (bed adjustment not UBL manual) to",
"to get up to temperature G29 P1 ; automatically populate",
"; enabled leveling and report the new mesh G29 S0",
"set ; to restore after G28 M155 S30 ; reduce",
"issue after print issue with larger prints despite manually leveling",
"; Turning off bed leveling while probing, if firmware is",
"probing, if firmware is set ; to restore after G28",
"S30 ; reduce temperature reporting rate to reduce output pollution",
"G28 ; home all axes M420 S0 ; Turning off",
"the bed to get up to temperature G29 P1 ;",
"bed to get up to temperature G29 P1 ; automatically",
"my mind! Just installed the CR Touch and I am",
"10.0 mm. G29 A ; Activate the UBL System. M500",
"to fix it. [![Screenshot of the bed mesh](https://i.stack.imgur.com/mbfEP.png \"Screenshot of",
"despite manually leveling the bed (bed adjustment not UBL manual)",
"note - `G29 P1` will only get through 44 of",
"`G29 P1` will only get through 44 of the 100",
"(optional) wait for the bed to get up to temperature",
"M190 S65 ; (optional) wait for the bed to get",
"mesh\")](https://i.stack.imgur.com/mbfEP.png \"Screenshot of the bed mesh\") Of note - `G29",
"rate to reduce output pollution M190 S65 ; (optional) wait",
"of the 100 touchpoints Here is the code I ran",
"am having print issue after print issue with larger prints",
"4.2.7 * Firmware: Marlin 2.1.2 * Firmware config: [`configuration.h`](https://www.dropbox.com/s/5bveiho4uh21iea/Configuration.h?dl=0) *",
"down the rabbit hole of UBL and I am losing",
"* Firmware config: [`configuration.h`](https://www.dropbox.com/s/5bveiho4uh21iea/Configuration.h?dl=0) * Hotend: Creality Direct Drive Sprite",
"fix it. [![Screenshot of the bed mesh](https://i.stack.imgur.com/mbfEP.png \"Screenshot of the",
"; reduce temperature reporting rate to reduce output pollution M190",
"of the mesh values G29 P3 ; infer the rest",
"(EEPROM). G29 F 10.0 ; Set Fade Height for correction",
"config: [`configuration.h`](https://www.dropbox.com/s/5bveiho4uh21iea/Configuration.h?dl=0) * Hotend: Creality Direct Drive Sprite Pro *",
"issue - I just don't know how to fix it.",
"Hotend: Creality Direct Drive Sprite Pro * UBL Sensor: CR",
"mesh](https://i.stack.imgur.com/mbfEP.png \"Screenshot of the bed mesh\")](https://i.stack.imgur.com/mbfEP.png \"Screenshot of the bed",
"V ; enabled leveling and report the new mesh G29",
"don't know how to fix it. [![Screenshot of the bed",
"of the bed mesh\") Of note - `G29 P1` will",
"the UBL System. M500 ; save the current setup to",
"wait for the bed to get up to temperature G29",
"of UBL and I am losing my mind! Just installed",
"and report the new mesh G29 S0 ; Save UBL",
"ability. * Ender 3 v1 * Board: Creality 4.2.7 *",
"report the new mesh G29 S0 ; Save UBL mesh",
"deeper down the rabbit hole of UBL and I am",
"Of note - `G29 P1` will only get through 44",
"S0 ; Turning off bed leveling while probing, if firmware",
"@BEDLEVELVISUALIZER ; tell the plugin to watch for reported mesh",
"rabbit hole of UBL and I am losing my mind!",
"- I just don't know how to fix it. [![Screenshot",
"map clearly shows an issue - I just don't know",
"watch for reported mesh M420 S1 V ; enabled leveling",
"* Board: Creality 4.2.7 * Firmware: Marlin 2.1.2 * Firmware",
"UBL mesh points to slot 0 (EEPROM). G29 F 10.0",
"10.0 ; Set Fade Height for correction at 10.0 mm.",
"bed mesh\")](https://i.stack.imgur.com/mbfEP.png \"Screenshot of the bed mesh\") Of note -",
"UBL manual) to the best of my ability. * Ender",
"44 of the 100 touchpoints Here is the code I",
"again @BEDLEVELVISUALIZER ; tell the plugin to watch for reported",
"bed mesh](https://i.stack.imgur.com/mbfEP.png \"Screenshot of the bed mesh\")](https://i.stack.imgur.com/mbfEP.png \"Screenshot of the",
"the current setup to EEPROM M155 S3 ; reset temperature",
"; infer the rest of the mesh values G29 P3",
"to generate the mesh: ``` G28 ; home all axes",
"restore after G28 M155 S30 ; reduce temperature reporting rate",
"height map clearly shows an issue - I just don't",
"A ; Activate the UBL System. M500 ; save the",
"Creality 4.2.7 * Firmware: Marlin 2.1.2 * Firmware config: [`configuration.h`](https://www.dropbox.com/s/5bveiho4uh21iea/Configuration.h?dl=0)",
"\"Screenshot of the bed mesh\")](https://i.stack.imgur.com/mbfEP.png \"Screenshot of the bed mesh\")",
"System. M500 ; save the current setup to EEPROM M155",
"the CR Touch and I am having print issue after",
"P1 ; automatically populate mesh with all reachable points G29",
"save the current setup to EEPROM M155 S3 ; reset",
"S65 ; (optional) wait for the bed to get up",
"Turning off bed leveling while probing, if firmware is set",
"* Firmware: Marlin 2.1.2 * Firmware config: [`configuration.h`](https://www.dropbox.com/s/5bveiho4uh21iea/Configuration.h?dl=0) * Hotend:",
"bed (bed adjustment not UBL manual) to the best of",
"the bed mesh\") Of note - `G29 P1` will only",
"Firmware: Marlin 2.1.2 * Firmware config: [`configuration.h`](https://www.dropbox.com/s/5bveiho4uh21iea/Configuration.h?dl=0) * Hotend: Creality",
"Drive Sprite Pro * UBL Sensor: CR Touch The height",
"how to fix it. [![Screenshot of the bed mesh](https://i.stack.imgur.com/mbfEP.png \"Screenshot",
"Touch and I am having print issue after print issue",
"reset temperature reporting M140 S0 ; cooling down the bed",
"P3 ; infer the rest of the mesh values G29",
"is set ; to restore after G28 M155 S30 ;",
"M420 S1 V ; enabled leveling and report the new",
"of the mesh values again @BEDLEVELVISUALIZER ; tell the plugin",
"[![Screenshot of the bed mesh](https://i.stack.imgur.com/mbfEP.png \"Screenshot of the bed mesh\")](https://i.stack.imgur.com/mbfEP.png",
"UBL System. M500 ; save the current setup to EEPROM",
"get up to temperature G29 P1 ; automatically populate mesh",
"prints despite manually leveling the bed (bed adjustment not UBL",
"if firmware is set ; to restore after G28 M155",
"after G28 M155 S30 ; reduce temperature reporting rate to",
"the 100 touchpoints Here is the code I ran through",
"axes M420 S0 ; Turning off bed leveling while probing,",
"rest of the mesh values G29 P3 ; infer the",
"manual) to the best of my ability. * Ender 3",
"an issue - I just don't know how to fix",
"up to temperature G29 P1 ; automatically populate mesh with",
"M500 ; save the current setup to EEPROM M155 S3",
"print issue with larger prints despite manually leveling the bed",
"and deeper down the rabbit hole of UBL and I",
"Sprite Pro * UBL Sensor: CR Touch The height map",
"(bed adjustment not UBL manual) to the best of my",
"my ability. * Ender 3 v1 * Board: Creality 4.2.7",
"M155 S3 ; reset temperature reporting M140 S0 ; cooling",
"P1` will only get through 44 of the 100 touchpoints",
"adjustment not UBL manual) to the best of my ability.",
"touchpoints Here is the code I ran through to generate",
"the mesh values G29 P3 ; infer the rest of",
"the bed (bed adjustment not UBL manual) to the best",
"to watch for reported mesh M420 S1 V ; enabled",
"bed mesh\") Of note - `G29 P1` will only get",
"Touch The height map clearly shows an issue - I",
"and I am losing my mind! Just installed the CR",
"the rest of the mesh values again @BEDLEVELVISUALIZER ; tell",
"output pollution M190 S65 ; (optional) wait for the bed",
"best of my ability. * Ender 3 v1 * Board:",
"values G29 P3 ; infer the rest of the mesh",
"generate the mesh: ``` G28 ; home all axes M420",
"points G29 P3 ; infer the rest of the mesh",
"Set Fade Height for correction at 10.0 mm. G29 A",
"CR Touch The height map clearly shows an issue -",
"mesh values G29 P3 ; infer the rest of the",
"reported mesh M420 S1 V ; enabled leveling and report",
"[`configuration.h`](https://www.dropbox.com/s/5bveiho4uh21iea/Configuration.h?dl=0) * Hotend: Creality Direct Drive Sprite Pro * UBL",
"Just installed the CR Touch and I am having print",
"UBL Sensor: CR Touch The height map clearly shows an",
"through to generate the mesh: ``` G28 ; home all",
"to restore after G28 M155 S30 ; reduce temperature reporting",
"for the bed to get up to temperature G29 P1",
"; automatically populate mesh with all reachable points G29 P3",
"reachable points G29 P3 ; infer the rest of the",
"G29 S0 ; Save UBL mesh points to slot 0",
"rest of the mesh values again @BEDLEVELVISUALIZER ; tell the",
"* Hotend: Creality Direct Drive Sprite Pro * UBL Sensor:",
"* UBL Sensor: CR Touch The height map clearly shows",
"temperature G29 P1 ; automatically populate mesh with all reachable",
"CR Touch and I am having print issue after print",
"it. [![Screenshot of the bed mesh](https://i.stack.imgur.com/mbfEP.png \"Screenshot of the bed",
"been getting deeper and deeper down the rabbit hole of",
"mesh: ``` G28 ; home all axes M420 S0 ;",
"Here is the code I ran through to generate the",
"temperature reporting rate to reduce output pollution M190 S65 ;",
"Fade Height for correction at 10.0 mm. G29 A ;",
"and I am having print issue after print issue with",
"mesh with all reachable points G29 P3 ; infer the",
"mesh points to slot 0 (EEPROM). G29 F 10.0 ;",
"mm. G29 A ; Activate the UBL System. M500 ;",
"; to restore after G28 M155 S30 ; reduce temperature",
"P3 ; infer the rest of the mesh values again",
"pollution M190 S65 ; (optional) wait for the bed to",
"the plugin to watch for reported mesh M420 S1 V",
"Creality Direct Drive Sprite Pro * UBL Sensor: CR Touch",
"- `G29 P1` will only get through 44 of the",
"I just don't know how to fix it. [ * Hotend: Creality Direct Drive",
"Direct Drive Sprite Pro * UBL Sensor: CR Touch The",
"know how to fix it. [![Screenshot of the bed mesh](https://i.stack.imgur.com/mbfEP.png",
"with all reachable points G29 P3 ; infer the rest",
"; tell the plugin to watch for reported mesh M420",
"mesh M420 S1 V ; enabled leveling and report the",
"; reset temperature reporting M140 S0 ; cooling down the",
"the best of my ability. * Ender 3 v1 *",
"clearly shows an issue - I just don't know how",
"correction at 10.0 mm. G29 A ; Activate the UBL",
"S0 ; Save UBL mesh points to slot 0 (EEPROM).",
"points to slot 0 (EEPROM). G29 F 10.0 ; Set",
"I am having print issue after print issue with larger",
"code I ran through to generate the mesh: ``` G28",
"current setup to EEPROM M155 S3 ; reset temperature reporting",
"Marlin 2.1.2 * Firmware config: [`configuration.h`](https://www.dropbox.com/s/5bveiho4uh21iea/Configuration.h?dl=0) * Hotend: Creality Direct",
"infer the rest of the mesh values G29 P3 ;",
"mesh\") Of note - `G29 P1` will only get through",
"home all axes M420 S0 ; Turning off bed leveling",
"getting deeper and deeper down the rabbit hole of UBL",
"v1 * Board: Creality 4.2.7 * Firmware: Marlin 2.1.2 *",
"automatically populate mesh with all reachable points G29 P3 ;",
"G29 A ; Activate the UBL System. M500 ; save",
"larger prints despite manually leveling the bed (bed adjustment not",
"reduce temperature reporting rate to reduce output pollution M190 S65",
"the mesh values again @BEDLEVELVISUALIZER ; tell the plugin to",
"leveling while probing, if firmware is set ; to restore",
"firmware is set ; to restore after G28 M155 S30",
"the code I ran through to generate the mesh: ```",
"losing my mind! Just installed the CR Touch and I",
"UBL and I am losing my mind! Just installed the",
"Height for correction at 10.0 mm. G29 A ; Activate",
"mesh G29 S0 ; Save UBL mesh points to slot",
"; home all axes M420 S0 ; Turning off bed",
"to temperature G29 P1 ; automatically populate mesh with all",
"; Activate the UBL System. M500 ; save the current",
"The height map clearly shows an issue - I just",
"100 touchpoints Here is the code I ran through to",
"populate mesh with all reachable points G29 P3 ; infer"
] |
[
"a little bit left for the surfaces. With all of",
"display cube, and I would like to have an LED",
"up from the bottom. I am using freeCad as my",
"visible, and also show the channels. My final option would",
"would be to create a pocket where the LEDs will",
"to hollow out the insides with a little bit left",
"then create holes leading back to the bottom. That seems",
"and I would like to have an LED light on",
"direction on my current project. I am building a display",
"and would like some direction on my current project. I",
"My final option would be to hollow out the insides",
"on both the left and right sides. The battery pack/power",
"However, this will make the cables visible, and also show",
"design tool. My initial thought would be to create a",
"as my design tool. My initial thought would be to",
"option would be to hollow out the insides with a",
"am just getting into printing and would like some direction",
"so that is why I am looking for a little",
"I am using freeCad as my design tool. My initial",
"am building a display cube, and I would like to",
"the inside of the square and run my cables through",
"would be to hollow out the insides with a little",
"surfaces. With all of these options, I can see pros",
"the bottom. I am using freeCad as my design tool.",
"square and run my cables through those. However, this will",
"the cables visible, and also show the channels. My final",
"back to the bottom. That seems like the logical solution.",
"a pocket where the LEDs will be at and then",
"come up from the bottom. I am using freeCad as",
"project. I am building a display cube, and I would",
"the square and run my cables through those. However, this",
"a display cube, and I would like to have an",
"be at and then create holes leading back to the",
"the surfaces. With all of these options, I can see",
"thought would be to create a pocket where the LEDs",
"initial thought would be to create a pocket where the",
"sides. The battery pack/power would come up from the bottom.",
"with a little bit left for the surfaces. With all",
"into printing and would like some direction on my current",
"bottom. That seems like the logical solution. Another option I",
"channels on the inside of the square and run my",
"run my cables through those. However, this will make the",
"these options, I can see pros and cons, so that",
"through those. However, this will make the cables visible, and",
"I am building a display cube, and I would like",
"Another option I had was to create channels on the",
"and also show the channels. My final option would be",
"logical solution. Another option I had was to create channels",
"I can see pros and cons, so that is why",
"my design tool. My initial thought would be to create",
"like some direction on my current project. I am building",
"the left and right sides. The battery pack/power would come",
"tool. My initial thought would be to create a pocket",
"where the LEDs will be at and then create holes",
"will make the cables visible, and also show the channels.",
"the channels. My final option would be to hollow out",
"right sides. The battery pack/power would come up from the",
"holes leading back to the bottom. That seems like the",
"That seems like the logical solution. Another option I had",
"and run my cables through those. However, this will make",
"be to create a pocket where the LEDs will be",
"also show the channels. My final option would be to",
"my cables through those. However, this will make the cables",
"the bottom. That seems like the logical solution. Another option",
"and right sides. The battery pack/power would come up from",
"was to create channels on the inside of the square",
"on my current project. I am building a display cube,",
"this will make the cables visible, and also show the",
"show the channels. My final option would be to hollow",
"to create channels on the inside of the square and",
"and then create holes leading back to the bottom. That",
"pros and cons, so that is why I am looking",
"all of these options, I can see pros and cons,",
"With all of these options, I can see pros and",
"channels. My final option would be to hollow out the",
"on the inside of the square and run my cables",
"cons, so that is why I am looking for a",
"create holes leading back to the bottom. That seems like",
"freeCad as my design tool. My initial thought would be",
"have an LED light on both the left and right",
"an LED light on both the left and right sides.",
"bottom. I am using freeCad as my design tool. My",
"pack/power would come up from the bottom. I am using",
"cables visible, and also show the channels. My final option",
"see pros and cons, so that is why I am",
"would like to have an LED light on both the",
"cube, and I would like to have an LED light",
"battery pack/power would come up from the bottom. I am",
"my current project. I am building a display cube, and",
"like the logical solution. Another option I had was to",
"left and right sides. The battery pack/power would come up",
"I am just getting into printing and would like some",
"little bit left for the surfaces. With all of these",
"be to hollow out the insides with a little bit",
"out the insides with a little bit left for the",
"final option would be to hollow out the insides with",
"left for the surfaces. With all of these options, I",
"printing and would like some direction on my current project.",
"using freeCad as my design tool. My initial thought would",
"I would like to have an LED light on both",
"at and then create holes leading back to the bottom.",
"The battery pack/power would come up from the bottom. I",
"the LEDs will be at and then create holes leading",
"LEDs will be at and then create holes leading back",
"like to have an LED light on both the left",
"am using freeCad as my design tool. My initial thought",
"would come up from the bottom. I am using freeCad",
"leading back to the bottom. That seems like the logical",
"to the bottom. That seems like the logical solution. Another",
"pocket where the LEDs will be at and then create",
"solution. Another option I had was to create channels on",
"LED light on both the left and right sides. The",
"My initial thought would be to create a pocket where",
"seems like the logical solution. Another option I had was",
"current project. I am building a display cube, and I",
"create channels on the inside of the square and run",
"those. However, this will make the cables visible, and also",
"that is why I am looking for a little guidance.",
"just getting into printing and would like some direction on",
"some direction on my current project. I am building a",
"had was to create channels on the inside of the",
"bit left for the surfaces. With all of these options,",
"building a display cube, and I would like to have",
"options, I can see pros and cons, so that is",
"to have an LED light on both the left and",
"the insides with a little bit left for the surfaces.",
"for the surfaces. With all of these options, I can",
"insides with a little bit left for the surfaces. With",
"can see pros and cons, so that is why I",
"hollow out the insides with a little bit left for",
"the logical solution. Another option I had was to create",
"and cons, so that is why I am looking for",
"would like some direction on my current project. I am",
"cables through those. However, this will make the cables visible,",
"light on both the left and right sides. The battery",
"of these options, I can see pros and cons, so",
"of the square and run my cables through those. However,",
"getting into printing and would like some direction on my",
"make the cables visible, and also show the channels. My",
"from the bottom. I am using freeCad as my design",
"will be at and then create holes leading back to",
"inside of the square and run my cables through those.",
"to create a pocket where the LEDs will be at",
"create a pocket where the LEDs will be at and",
"option I had was to create channels on the inside",
"both the left and right sides. The battery pack/power would",
"I had was to create channels on the inside of"
] |
[
"slicing. I print in PLA at 200 °C. The print",
"Ender 3 Pro and using Ultimaker Cura for slicing. I",
"in PLA at 200 °C. The print bed is set",
"mm/s infill) and then a second time slower (20-30 mm/s,",
"mm, the line width 0.4 mm from the 0.4 mm",
"from the 0.4 mm nozzle. I'm not positive what my",
"printed other things without changing the filament or printer, so",
"me problems. I've printed other things without changing the filament",
"0.4 mm from the 0.4 mm nozzle. I'm not positive",
"of things can I do to fix this? I'm printing",
"mm nozzle. I'm not positive what my print speed was",
"speed is. My retraction is 6.5 mm/off at 25 mm/s.",
"probably). Regardless, the wall speed was set to half whatever",
"do to fix this? I'm printing on an Ender 3",
"I set to 0.2 mm, the line width 0.4 mm",
"was set to, but I think I tried it at",
"second time slower (20-30 mm/s, probably). Regardless, the wall speed",
"the filament or printer, so the problem is at least",
"on an Ender 3 Pro and using Ultimaker Cura for",
"half whatever the infill speed is. My retraction is 6.5",
"°C. The print bed is set to 40 °C. I",
"a print cooling fan at 100%. The layer height I",
"this? I'm printing on an Ender 3 Pro and using",
"set to 0.2 mm, the line width 0.4 mm from",
"infill speed is. My retraction is 6.5 mm/off at 25",
"speed was set to, but I think I tried it",
"or printer, so the problem is at least partially the",
"I tried it at the default (50 mm/s infill) and",
"0.4 mm nozzle. I'm not positive what my print speed",
"things can I do to fix this? I'm printing on",
"cooling fan at 100%. The layer height I set to",
"The print bed is set to 40 °C. I use",
"but I think I tried it at the default (50",
"least partially the print itself, which has a lot of",
"print speed was set to, but I think I tried",
"set to, but I think I tried it at the",
"the wall speed was set to half whatever the infill",
"is. My retraction is 6.5 mm/off at 25 mm/s. [](https://i.stack.imgur.com/xIHAD.jpg)",
"filament or printer, so the problem is at least partially",
"printing on an Ender 3 Pro and using Ultimaker Cura",
"and using Ultimaker Cura for slicing. I print in PLA",
"(20-30 mm/s, probably). Regardless, the wall speed was set to",
"and unconnected sections. What sorts of things can I do",
"whatever the infill speed is. My retraction is 6.5 mm/off",
"Ultimaker Cura for slicing. I print in PLA at 200",
"width 0.4 mm from the 0.4 mm nozzle. I'm not",
"I'm printing on an Ender 3 Pro and using Ultimaker",
"print cooling fan at 100%. The layer height I set",
"at least partially the print itself, which has a lot"
] |
[
"not, or if this is just not possible. Thank you!",
"was wondering if it would be possible to stack a",
"cross on top in Cura](https://i.stack.imgur.com/CEcPF.png \"Screenshot of a rectangular 3D",
"should use some form of supports or not, or if",
"I should use some form of supports or not, or",
"like the image below, where the top is not a",
"all of the circles and the cross stick out an",
"also flat. [![Screenshot of a rectangular 3D model with circles",
"what your thoughts are regarding this, if I should use",
"that stick out of an otherwise flat rectangle. The bottom",
"this, if I should use some form of supports or",
"mm PLA filament. The print itself has a 0.8 mm",
"top in Cura\") Let me know what your thoughts are",
"with 1.75 mm PLA filament. The print itself has a",
"a couple of shapes (mainly circles and a cross) that",
"in Cura\")](https://i.stack.imgur.com/CEcPF.png \"Screenshot of a rectangular 3D model with circles",
"a cross on top in Cura\")](https://i.stack.imgur.com/CEcPF.png \"Screenshot of a rectangular",
"circles and a cross) that stick out of an otherwise",
"how to stack models using Cura and I was wondering",
"model like the image below, where the top is not",
"would be possible to stack a model like the image",
"if it would be possible to stack a model like",
"been researching how to stack models using Cura and I",
"Thank you! Edit: Forgot to include some details. I'm using",
"below, where the top is not a flat surface. There",
"not a flat surface. There are a couple of shapes",
"to stack a model like the image below, where the",
"base and all of the circles and the cross stick",
"stack a model like the image below, where the top",
"Cura and I was wondering if it would be possible",
"on top in Cura\") Let me know what your thoughts",
"if I should use some form of supports or not,",
"regarding this, if I should use some form of supports",
"is not a flat surface. There are a couple of",
"wondering if it would be possible to stack a model",
"models using Cura and I was wondering if it would",
"some form of supports or not, or if this is",
"supports or not, or if this is just not possible.",
"researching how to stack models using Cura and I was",
"image below, where the top is not a flat surface.",
"it would be possible to stack a model like the",
"shapes (mainly circles and a cross) that stick out of",
"use some form of supports or not, or if this",
"your thoughts are regarding this, if I should use some",
"with circles and a cross on top in Cura\")](https://i.stack.imgur.com/CEcPF.png \"Screenshot",
"details. I'm using an Ender 3 3D printer with 1.75",
"otherwise flat rectangle. The bottom of the model is also",
"model is also flat. [![Screenshot of a rectangular 3D model",
"include some details. I'm using an Ender 3 3D printer",
"a flat surface. There are a couple of shapes (mainly",
"is just not possible. Thank you! Edit: Forgot to include",
"The print itself has a 0.8 mm thick rectangular base",
"me know what your thoughts are regarding this, if I",
"cross on top in Cura\") Let me know what your",
"mm thick rectangular base and all of the circles and",
"and a cross on top in Cura\") Let me know",
"of supports or not, or if this is just not",
"using an Ender 3 3D printer with 1.75 mm PLA",
"and all of the circles and the cross stick out",
"\"Screenshot of a rectangular 3D model with circles and a",
"and a cross on top in Cura\")](https://i.stack.imgur.com/CEcPF.png \"Screenshot of a",
"Edit: Forgot to include some details. I'm using an Ender",
"on top in Cura\")](https://i.stack.imgur.com/CEcPF.png \"Screenshot of a rectangular 3D model",
"some details. I'm using an Ender 3 3D printer with",
"of the circles and the cross stick out an additional",
"know what your thoughts are regarding this, if I should",
"is also flat. [![Screenshot of a rectangular 3D model with",
"itself has a 0.8 mm thick rectangular base and all",
"the image below, where the top is not a flat",
"cross on top in Cura\")](https://i.stack.imgur.com/CEcPF.png \"Screenshot of a rectangular 3D",
"flat. [![Screenshot of a rectangular 3D model with circles and",
"in Cura\") Let me know what your thoughts are regarding",
"model with circles and a cross on top in Cura\")",
"print itself has a 0.8 mm thick rectangular base and",
"of a rectangular 3D model with circles and a cross",
"top in Cura](https://i.stack.imgur.com/CEcPF.png \"Screenshot of a rectangular 3D model with",
"cross) that stick out of an otherwise flat rectangle. The",
"printer with 1.75 mm PLA filament. The print itself has",
"and a cross on top in Cura](https://i.stack.imgur.com/CEcPF.png \"Screenshot of a",
"rectangular base and all of the circles and the cross",
"The bottom of the model is also flat. [![Screenshot of",
"I have been researching how to stack models using Cura",
"[![Screenshot of a rectangular 3D model with circles and a",
"where the top is not a flat surface. There are",
"to stack models using Cura and I was wondering if",
"model with circles and a cross on top in Cura](https://i.stack.imgur.com/CEcPF.png",
"circles and the cross stick out an additional 0.8 mm.",
"the top is not a flat surface. There are a",
"Let me know what your thoughts are regarding this, if",
"stack models using Cura and I was wondering if it",
"and I was wondering if it would be possible to",
"Forgot to include some details. I'm using an Ender 3",
"3D printer with 1.75 mm PLA filament. The print itself",
"flat surface. There are a couple of shapes (mainly circles",
"3 3D printer with 1.75 mm PLA filament. The print",
"Ender 3 3D printer with 1.75 mm PLA filament. The",
"surface. There are a couple of shapes (mainly circles and",
"a model like the image below, where the top is",
"circles and a cross on top in Cura\")](https://i.stack.imgur.com/CEcPF.png \"Screenshot of",
"0.8 mm thick rectangular base and all of the circles",
"bottom of the model is also flat. [![Screenshot of a",
"the circles and the cross stick out an additional 0.8",
"out of an otherwise flat rectangle. The bottom of the",
"of the model is also flat. [![Screenshot of a rectangular",
"of shapes (mainly circles and a cross) that stick out",
"you! Edit: Forgot to include some details. I'm using an",
"rectangle. The bottom of the model is also flat. [![Screenshot",
"with circles and a cross on top in Cura](https://i.stack.imgur.com/CEcPF.png \"Screenshot",
"I'm using an Ender 3 3D printer with 1.75 mm",
"or if this is just not possible. Thank you! Edit:",
"I was wondering if it would be possible to stack",
"and a cross) that stick out of an otherwise flat",
"3D model with circles and a cross on top in",
"a cross on top in Cura\") Let me know what",
"of an otherwise flat rectangle. The bottom of the model",
"(mainly circles and a cross) that stick out of an",
"to include some details. I'm using an Ender 3 3D",
"are regarding this, if I should use some form of",
"Cura\") Let me know what your thoughts are regarding this,",
"have been researching how to stack models using Cura and",
"be possible to stack a model like the image below,",
"couple of shapes (mainly circles and a cross) that stick",
"or not, or if this is just not possible. Thank",
"has a 0.8 mm thick rectangular base and all of",
"are a couple of shapes (mainly circles and a cross)",
"There are a couple of shapes (mainly circles and a",
"1.75 mm PLA filament. The print itself has a 0.8",
"top in Cura\")](https://i.stack.imgur.com/CEcPF.png \"Screenshot of a rectangular 3D model with",
"rectangular 3D model with circles and a cross on top",
"model with circles and a cross on top in Cura\")](https://i.stack.imgur.com/CEcPF.png",
"an otherwise flat rectangle. The bottom of the model is",
"form of supports or not, or if this is just",
"just not possible. Thank you! Edit: Forgot to include some",
"stick out of an otherwise flat rectangle. The bottom of",
"the model is also flat. [![Screenshot of a rectangular 3D",
"Cura\")](https://i.stack.imgur.com/CEcPF.png \"Screenshot of a rectangular 3D model with circles and",
"not possible. Thank you! Edit: Forgot to include some details.",
"a cross on top in Cura](https://i.stack.imgur.com/CEcPF.png \"Screenshot of a rectangular",
"an Ender 3 3D printer with 1.75 mm PLA filament.",
"a rectangular 3D model with circles and a cross on",
"circles and a cross on top in Cura](https://i.stack.imgur.com/CEcPF.png \"Screenshot of",
"PLA filament. The print itself has a 0.8 mm thick",
"filament. The print itself has a 0.8 mm thick rectangular",
"top is not a flat surface. There are a couple",
"in Cura](https://i.stack.imgur.com/CEcPF.png \"Screenshot of a rectangular 3D model with circles",
"Cura](https://i.stack.imgur.com/CEcPF.png \"Screenshot of a rectangular 3D model with circles and",
"a cross) that stick out of an otherwise flat rectangle.",
"with circles and a cross on top in Cura\") Let",
"a 0.8 mm thick rectangular base and all of the",
"this is just not possible. Thank you! Edit: Forgot to",
"possible. Thank you! Edit: Forgot to include some details. I'm",
"circles and a cross on top in Cura\") Let me",
"flat rectangle. The bottom of the model is also flat.",
"if this is just not possible. Thank you! Edit: Forgot",
"thoughts are regarding this, if I should use some form",
"thick rectangular base and all of the circles and the",
"possible to stack a model like the image below, where",
"using Cura and I was wondering if it would be",
"on top in Cura](https://i.stack.imgur.com/CEcPF.png \"Screenshot of a rectangular 3D model"
] |
[
"motor that guides the filament to the extruder. The metal",
"in the photo, but it's not doing it job. Do",
"is broken is on top of the Z stepper motor",
"replace the whole stepper motor or can I just get",
"guides the filament to the extruder. The metal \"guide wheel\"",
"feeder thing that sits on top of the motor? [![This",
"the motor? [![This thing...](https://i.stack.imgur.com/ouABu.jpg \"This thing...\")](https://i.stack.imgur.com/ouABu.jpg \"This thing...\") I don't",
"wrench on it. -- it's just sitting there in the",
"broke. I dropped a socket wrench on it. -- it's",
"piece broke. The part that is broken is on top",
"as its pushed through, the plate beneath it broke. I",
"wheel\" that hugs the filament as its pushed through, the",
"part that is broken is on top of the Z",
"job. Do I have to replace the whole stepper motor",
"The part that is broken is on top of the",
"socket wrench on it. -- it's just sitting there in",
"the Z stepper motor that guides the filament to the",
"know what it's called so it's tough to search for",
"the extruder. The metal \"guide wheel\" that hugs the filament",
"I've an Ender 3 and a piece broke. The part",
"the filament to the extruder. The metal \"guide wheel\" that",
"sits on top of the motor? [![This thing...](https://i.stack.imgur.com/ouABu.jpg \"This thing...\")](https://i.stack.imgur.com/ouABu.jpg",
"is on top of the Z stepper motor that guides",
"photo, but it's not doing it job. Do I have",
"metal \"guide wheel\" that hugs the filament as its pushed",
"thing...](https://i.stack.imgur.com/ouABu.jpg \"This thing...\")](https://i.stack.imgur.com/ouABu.jpg \"This thing...\") I don't know what it's",
"broke. The part that is broken is on top of",
"that is broken is on top of the Z stepper",
"filament to the extruder. The metal \"guide wheel\" that hugs",
"plate beneath it broke. I dropped a socket wrench on",
"can I just get the feeder thing that sits on",
"top of the Z stepper motor that guides the filament",
"thing...\") I don't know what it's called so it's tough",
"it's not doing it job. Do I have to replace",
"just sitting there in the photo, but it's not doing",
"through, the plate beneath it broke. I dropped a socket",
"pushed through, the plate beneath it broke. I dropped a",
"don't know what it's called so it's tough to search",
"get the feeder thing that sits on top of the",
"of the Z stepper motor that guides the filament to",
"to the extruder. The metal \"guide wheel\" that hugs the",
"it broke. I dropped a socket wrench on it. --",
"filament as its pushed through, the plate beneath it broke.",
"it job. Do I have to replace the whole stepper",
"on top of the Z stepper motor that guides the",
"to replace the whole stepper motor or can I just",
"the feeder thing that sits on top of the motor?",
"the plate beneath it broke. I dropped a socket wrench",
"I just get the feeder thing that sits on top",
"hugs the filament as its pushed through, the plate beneath",
"I dropped a socket wrench on it. -- it's just",
"extruder. The metal \"guide wheel\" that hugs the filament as",
"stepper motor or can I just get the feeder thing",
"or can I just get the feeder thing that sits",
"on top of the motor? [![This thing...](https://i.stack.imgur.com/ouABu.jpg \"This thing...\")](https://i.stack.imgur.com/ouABu.jpg \"This",
"it. -- it's just sitting there in the photo, but",
"a piece broke. The part that is broken is on",
"have to replace the whole stepper motor or can I",
"the whole stepper motor or can I just get the",
"stepper motor that guides the filament to the extruder. The",
"the filament as its pushed through, the plate beneath it",
"sitting there in the photo, but it's not doing it",
"thing that sits on top of the motor? [![This thing...](https://i.stack.imgur.com/ouABu.jpg",
"but it's not doing it job. Do I have to",
"a socket wrench on it. -- it's just sitting there",
"of the motor? [![This thing...](https://i.stack.imgur.com/ouABu.jpg \"This thing...\")](https://i.stack.imgur.com/ouABu.jpg \"This thing...\") I",
"an Ender 3 and a piece broke. The part that",
"The metal \"guide wheel\" that hugs the filament as its",
"[![This thing...](https://i.stack.imgur.com/ouABu.jpg \"This thing...\")](https://i.stack.imgur.com/ouABu.jpg \"This thing...\") I don't know what",
"broken is on top of the Z stepper motor that",
"\"This thing...\")](https://i.stack.imgur.com/ouABu.jpg \"This thing...\") I don't know what it's called",
"\"guide wheel\" that hugs the filament as its pushed through,",
"beneath it broke. I dropped a socket wrench on it.",
"Z stepper motor that guides the filament to the extruder.",
"just get the feeder thing that sits on top of",
"that sits on top of the motor? [![This thing...](https://i.stack.imgur.com/ouABu.jpg \"This",
"thing...\")](https://i.stack.imgur.com/ouABu.jpg \"This thing...\") I don't know what it's called so",
"not doing it job. Do I have to replace the",
"dropped a socket wrench on it. -- it's just sitting",
"Do I have to replace the whole stepper motor or",
"that guides the filament to the extruder. The metal \"guide",
"top of the motor? [![This thing...](https://i.stack.imgur.com/ouABu.jpg \"This thing...\")](https://i.stack.imgur.com/ouABu.jpg \"This thing...\")",
"it's just sitting there in the photo, but it's not",
"I don't know what it's called so it's tough to",
"whole stepper motor or can I just get the feeder",
"motor or can I just get the feeder thing that",
"the photo, but it's not doing it job. Do I",
"doing it job. Do I have to replace the whole",
"and a piece broke. The part that is broken is",
"there in the photo, but it's not doing it job.",
"on it. -- it's just sitting there in the photo,",
"motor? [![This thing...](https://i.stack.imgur.com/ouABu.jpg \"This thing...\")](https://i.stack.imgur.com/ouABu.jpg \"This thing...\") I don't know",
"Ender 3 and a piece broke. The part that is",
"3 and a piece broke. The part that is broken",
"\"This thing...\") I don't know what it's called so it's",
"its pushed through, the plate beneath it broke. I dropped",
"-- it's just sitting there in the photo, but it's",
"that hugs the filament as its pushed through, the plate",
"I have to replace the whole stepper motor or can"
] |
[
"gel. I also did multiple cold pulls until no debris.",
"due to varying cooling %. Filament: PLA, Temp: 215 °C,",
"XYZ cube, and there is a line right under the",
"some steps I found from All3D. I also have a",
"1.75 mm filament while the printer is designed for 2.85",
"the issue. Filament: PLA, Temp: 215 °C, Slicer: Cura ",
"printer is designed for 2.85 mm. In order to do",
"that the extrusion is more inconsistent outside of the letters.",
"as I am using Prusament PLA that I am storing",
"I am storing in a dark closet inside a sealed",
"order to do this, I followed some steps I found",
"I calibrated the e-steps and all of the axes, but",
"the printer is designed for 2.85 mm. In order to",
"but not during prints. However, I am using 1.75 mm",
"the e-steps and all of the axes, but the problem",
"increase and decrease. I don't think it is the filament",
"extrusion is more inconsistent outside of the letters. I'm pretty",
"I am using Prusament PLA that I am storing in",
"Slicer: Cura  \\*Update: I calibrated the e-steps and all",
"to hold the filament, but I think it turns pretty",
"hold the filament, but I think it turns pretty well",
"appears to bubble. The extruding motor also sometimes slips/snaps back",
"The extruding motor also sometimes slips/snaps back while changing filament,",
"think it is the filament quality, as I am using",
"letters. I'm pretty sure this issue is related to the",
"while changing filament, but not during prints. However, I am",
"to increase and decrease. I don't think it is the",
"the filament appears to bubble. The extruding motor also sometimes",
"the extrusion is more inconsistent outside of the letters. I'm",
"Go, and I'm having some weird extrusion issues. The printer",
"an old Ultimaker 2 Go, and I'm having some weird",
"mm. In order to do this, I followed some steps",
"The printer uses a Bowden extruder. Extrusion seems to increase",
"be the issue. Filament: PLA, Temp: 215 °C, Slicer: Cura",
"issue due to varying cooling %. Filament: PLA, Temp: 215",
"am using 1.75 mm filament while the printer is designed",
"Prusament PLA that I am storing in a dark closet",
"sealed bag with silica gel. I also did multiple cold",
"I also printed an XYZ cube, and there is a",
"a sealed bag with silica gel. I also did multiple",
"Ultimaker 2 Go, and I'm having some weird extrusion issues.",
"pretty well and shouldn't be the issue. Filament: PLA, Temp:",
"appears that the extrusion is more inconsistent outside of the",
" \\*Update: I calibrated the e-steps and all of the",
"while the printer is designed for 2.85 mm. In order",
"for 2.85 mm. In order to do this, I followed",
"found from All3D. I also have a small PVC jig",
"extrusion issues. The printer uses a Bowden extruder. Extrusion seems",
"a cooling issue due to varying cooling %. Filament: PLA,",
"prints. However, I am using 1.75 mm filament while the",
"filament, but not during prints. However, I am using 1.75",
"the letters. I'm pretty sure this issue is related to",
"I found from All3D. I also have a small PVC",
"but I think it turns pretty well and shouldn't be",
"Temp: 215 °C, Slicer: Cura  \\*Update: I calibrated the",
"Cura  \\*Update: I calibrated the e-steps and all of",
"a Bowden extruder. Extrusion seems to increase and decrease. I",
"printed an XYZ cube, and there is a line right",
"and shouldn't be the issue. Filament: PLA, Temp: 215 °C,",
"well and shouldn't be the issue. Filament: PLA, Temp: 215",
"axes, but the problem still remains. I also printed an",
"but the problem still remains. I also printed an XYZ",
"cooling %. Filament: PLA, Temp: 215 °C, Slicer: PrusaSlicer ",
"decrease. I don't think it is the filament quality, as",
"also did multiple cold pulls until no debris. I do",
"turns pretty well and shouldn't be the issue. Filament: PLA,",
"dark closet inside a sealed bag with silica gel. I",
"weird extrusion issues. The printer uses a Bowden extruder. Extrusion",
"to the weird first-layer pattern, or this is just a",
"steps I found from All3D. I also have a small",
"using 1.75 mm filament while the printer is designed for",
"multiple cold pulls until no debris. I do notice that",
"the problem still remains. I also printed an XYZ cube,",
"I am using 1.75 mm filament while the printer is",
"still remains. I also printed an XYZ cube, and there",
"letters X and Y. It also appears that the extrusion",
"do notice that sometimes the filament appears to bubble. The",
"I'm pretty sure this issue is related to the weird",
"cooling issue due to varying cooling %. Filament: PLA, Temp:",
"a line right under the letters X and Y. It",
"notice that sometimes the filament appears to bubble. The extruding",
"of the letters. I'm pretty sure this issue is related",
"having some weird extrusion issues. The printer uses a Bowden",
"filament while the printer is designed for 2.85 mm. In",
"jig to hold the filament, but I think it turns",
"that I am storing in a dark closet inside a",
"and all of the axes, but the problem still remains.",
"I'm working on tuning an old Ultimaker 2 Go, and",
"calibrated the e-steps and all of the axes, but the",
"also have a small PVC jig to hold the filament,",
"I'm having some weird extrusion issues. The printer uses a",
"using Prusament PLA that I am storing in a dark",
"extruding motor also sometimes slips/snaps back while changing filament, but",
"closet inside a sealed bag with silica gel. I also",
"shouldn't be the issue. Filament: PLA, Temp: 215 °C, Slicer:",
"sure this issue is related to the weird first-layer pattern,",
"or this is just a cooling issue due to varying",
"the filament, but I think it turns pretty well and",
"I also have a small PVC jig to hold the",
"silica gel. I also did multiple cold pulls until no",
"back while changing filament, but not during prints. However, I",
"followed some steps I found from All3D. I also have",
"changing filament, but not during prints. However, I am using",
"bag with silica gel. I also did multiple cold pulls",
"It also appears that the extrusion is more inconsistent outside",
"2 Go, and I'm having some weird extrusion issues. The",
"printer uses a Bowden extruder. Extrusion seems to increase and",
"tuning an old Ultimaker 2 Go, and I'm having some",
"PVC jig to hold the filament, but I think it",
"this, I followed some steps I found from All3D. I",
"to varying cooling %. Filament: PLA, Temp: 215 °C, Slicer:",
"sometimes slips/snaps back while changing filament, but not during prints.",
"am using Prusament PLA that I am storing in a",
"°C, Slicer: Cura  \\*Update: I calibrated the e-steps and",
"In order to do this, I followed some steps I",
"is related to the weird first-layer pattern, or this is",
"during prints. However, I am using 1.75 mm filament while",
"cube, and there is a line right under the letters",
"do this, I followed some steps I found from All3D.",
"extruder. Extrusion seems to increase and decrease. I don't think",
"filament appears to bubble. The extruding motor also sometimes slips/snaps",
"cold pulls until no debris. I do notice that sometimes",
"e-steps and all of the axes, but the problem still",
"under the letters X and Y. It also appears that",
"weird first-layer pattern, or this is just a cooling issue",
"I do notice that sometimes the filament appears to bubble.",
"PLA, Temp: 215 °C, Slicer: Cura  \\*Update: I calibrated",
"\\*Update: I calibrated the e-steps and all of the axes,",
"this issue is related to the weird first-layer pattern, or",
"right under the letters X and Y. It also appears",
"pretty sure this issue is related to the weird first-layer",
"this is just a cooling issue due to varying cooling",
"is just a cooling issue due to varying cooling %.",
"filament, but I think it turns pretty well and shouldn't",
"215 °C, Slicer: Cura  \\*Update: I calibrated the e-steps",
"also sometimes slips/snaps back while changing filament, but not during",
"motor also sometimes slips/snaps back while changing filament, but not",
"issue. Filament: PLA, Temp: 215 °C, Slicer: Cura  \\*Update:",
"did multiple cold pulls until no debris. I do notice",
"no debris. I do notice that sometimes the filament appears",
"issues. The printer uses a Bowden extruder. Extrusion seems to",
"and Y. It also appears that the extrusion is more",
"and I'm having some weird extrusion issues. The printer uses",
"pattern, or this is just a cooling issue due to",
"just a cooling issue due to varying cooling %. Filament:",
"from All3D. I also have a small PVC jig to",
"I followed some steps I found from All3D. I also",
"issue is related to the weird first-layer pattern, or this",
"on tuning an old Ultimaker 2 Go, and I'm having",
"in a dark closet inside a sealed bag with silica",
"Filament: PLA, Temp: 215 °C, Slicer: Cura  \\*Update: I",
"to do this, I followed some steps I found from",
"and there is a line right under the letters X",
"is a line right under the letters X and Y.",
"also appears that the extrusion is more inconsistent outside of",
"2.85 mm. In order to do this, I followed some",
"All3D. I also have a small PVC jig to hold",
"it turns pretty well and shouldn't be the issue. Filament:",
"sometimes the filament appears to bubble. The extruding motor also",
"until no debris. I do notice that sometimes the filament",
"is more inconsistent outside of the letters. I'm pretty sure",
"the weird first-layer pattern, or this is just a cooling",
"a small PVC jig to hold the filament, but I",
"slips/snaps back while changing filament, but not during prints. However,",
"working on tuning an old Ultimaker 2 Go, and I'm",
"PLA that I am storing in a dark closet inside",
"bubble. The extruding motor also sometimes slips/snaps back while changing",
"that sometimes the filament appears to bubble. The extruding motor",
"it is the filament quality, as I am using Prusament",
"However, I am using 1.75 mm filament while the printer",
"small PVC jig to hold the filament, but I think",
"debris. I do notice that sometimes the filament appears to",
"pulls until no debris. I do notice that sometimes the",
"Extrusion seems to increase and decrease. I don't think it",
"am storing in a dark closet inside a sealed bag",
"not during prints. However, I am using 1.75 mm filament",
"remains. I also printed an XYZ cube, and there is",
"Y. It also appears that the extrusion is more inconsistent",
"outside of the letters. I'm pretty sure this issue is",
"related to the weird first-layer pattern, or this is just",
"with silica gel. I also did multiple cold pulls until",
"the axes, but the problem still remains. I also printed",
"seems to increase and decrease. I don't think it is",
"the filament quality, as I am using Prusament PLA that",
"all of the axes, but the problem still remains. I",
"the letters X and Y. It also appears that the",
"inconsistent outside of the letters. I'm pretty sure this issue",
"storing in a dark closet inside a sealed bag with",
"and decrease. I don't think it is the filament quality,",
"uses a Bowden extruder. Extrusion seems to increase and decrease.",
"problem still remains. I also printed an XYZ cube, and",
"filament quality, as I am using Prusament PLA that I",
"inside a sealed bag with silica gel. I also did",
"more inconsistent outside of the letters. I'm pretty sure this",
"quality, as I am using Prusament PLA that I am",
"is designed for 2.85 mm. In order to do this,",
"X and Y. It also appears that the extrusion is",
"line right under the letters X and Y. It also",
"Bowden extruder. Extrusion seems to increase and decrease. I don't",
"of the axes, but the problem still remains. I also",
"is the filament quality, as I am using Prusament PLA",
"old Ultimaker 2 Go, and I'm having some weird extrusion",
"I also did multiple cold pulls until no debris. I",
"also printed an XYZ cube, and there is a line",
"mm filament while the printer is designed for 2.85 mm.",
"think it turns pretty well and shouldn't be the issue.",
"some weird extrusion issues. The printer uses a Bowden extruder.",
"a dark closet inside a sealed bag with silica gel.",
"designed for 2.85 mm. In order to do this, I",
"an XYZ cube, and there is a line right under",
"there is a line right under the letters X and",
"I don't think it is the filament quality, as I",
"have a small PVC jig to hold the filament, but",
"I think it turns pretty well and shouldn't be the",
"varying cooling %. Filament: PLA, Temp: 215 °C, Slicer: PrusaSlicer",
"to bubble. The extruding motor also sometimes slips/snaps back while",
"first-layer pattern, or this is just a cooling issue due",
"don't think it is the filament quality, as I am"
] |
[
"tube, printer extrude in the air. But when I extrude",
"much shorter. Is that normal? The nozzle is almost new.",
"It was working for only a few hours. How can",
"another end before nozzle. But when I attach the Bowden",
"that normal? Or is the method used to calibrate correct",
"is correct, but when I attach the Bowden tube to",
"To Calibrate E Steps On Ender 3 (V2/Pro)](https://makershop.co/how-to-calibrate-esteps-ender-3/), calibrated with",
"On Ender 3 (V2/Pro)](https://makershop.co/how-to-calibrate-esteps-ender-3/), calibrated with and without the Bowden",
"I need a new nozzle, or there is some another",
"is ok. When I extrude 100 mm of filament, everything",
"The method that I used to calibrate is described here,",
"and everything is ok. When I extrude 100 mm of",
"calibrate is described here, [Stupid Fast Way To Calibrate E",
"Bowden tube and extrude, the nozzle is all wrong. I",
"length of filament that is extruded is not correct -",
"is all wrong. I used the method from the link",
"that is extruded is not correct - it is much",
"and extrude, the nozzle is all wrong. I used the",
"when I extrude from nozzle distance in much shorter. Is",
"is not correct - it is much shorter. Is that",
"Before calibration, they were terrible. The method that I used",
"3 (V2/Pro)](https://makershop.co/how-to-calibrate-esteps-ender-3/), calibrated with and without the Bowden tube -",
"with and without the Bowden tube - on the another",
"nozzle is all wrong. I used the method from the",
"without the Bowden tube - on the another end before",
"on the another end before nozzle. But when I attach",
"tube and extrude, the nozzle is all wrong. I used",
"I used to calibrate is described here, [Stupid Fast Way",
"for only a few hours. How can I fix it?",
"calibrated my extruder and everything is ok. When I extrude",
"filament, everything is correct, but when I attach the Bowden",
"described here, [Stupid Fast Way To Calibrate E Steps On",
"method now my prints are ok. Method is without Bowden",
"Method is without Bowden tube, printer extrude in the air.",
"But when I attach the Bowden tube and extrude, the",
"fine. Before calibration, they were terrible. The method that I",
"hours. How can I fix it? Do I need a",
"this method now my prints are ok. Method is without",
"the nozzle is all wrong. I used the method from",
"Is that normal? Or is the method used to calibrate",
"the nozzle, the length of filament that is extruded is",
"extrude in the air. But when I extrude from nozzle",
"have just calibrated my extruder and everything is ok. When",
"shorter. Is that normal? Or is the method used to",
"Ender 3 (V2/Pro)](https://makershop.co/how-to-calibrate-esteps-ender-3/), calibrated with and without the Bowden tube",
"here, [Stupid Fast Way To Calibrate E Steps On Ender",
"above. My prints were terrible before calibration. Using this method",
"distance in much shorter. Is that normal? Or is the",
"wrong. I used the method from the link above. My",
"method that I used to calibrate is described here, [Stupid",
"the Bowden tube and extrude, the nozzle is all wrong.",
"used the method from the link above. My prints were",
"just calibrated my extruder and everything is ok. When I",
"is some another issue? I tried some prints and they",
"can I fix it? Do I need a new nozzle,",
"from nozzle distance in much shorter. Is that normal? Or",
"some another issue? I tried some prints and they were",
"in the air. But when I extrude from nozzle distance",
"nozzle distance in much shorter. Is that normal? Or is",
"nozzle is almost new. It was working for only a",
"is without Bowden tube, printer extrude in the air. But",
"when I attach the Bowden tube and extrude, the nozzle",
"now my prints are ok. Method is without Bowden tube,",
"everything is ok. When I extrude 100 mm of filament,",
"I attach the Bowden tube to the nozzle, the length",
"attach the Bowden tube to the nozzle, the length of",
"that I used to calibrate is described here, [Stupid Fast",
"but when I attach the Bowden tube to the nozzle,",
"to calibrate is described here, [Stupid Fast Way To Calibrate",
"normal? The nozzle is almost new. It was working for",
"my extruder and everything is ok. When I extrude 100",
"extruded is not correct - it is much shorter. Is",
"nozzle, or there is some another issue? I tried some",
"I used the method from the link above. My prints",
"the Bowden tube - on the another end before nozzle.",
"were terrible. The method that I used to calibrate is",
"the length of filament that is extruded is not correct",
"not correct - it is much shorter. Is that normal?",
"attach the Bowden tube and extrude, the nozzle is all",
"ok. Method is without Bowden tube, printer extrude in the",
"the another end before nozzle. But when I attach the",
"calibrated with and without the Bowden tube - on the",
"correct, but when I attach the Bowden tube to the",
"the air. But when I extrude from nozzle distance in",
"method from the link above. My prints were terrible before",
"I fix it? Do I need a new nozzle, or",
"much shorter. Is that normal? Or is the method used",
"new. It was working for only a few hours. How",
"that normal? The nozzle is almost new. It was working",
"is extruded is not correct - it is much shorter.",
"calibration, they were terrible. The method that I used to",
"calibration. Using this method now my prints are ok. Method",
"I extrude from nozzle distance in much shorter. Is that",
"of filament that is extruded is not correct - it",
"a few hours. How can I fix it? Do I",
"the Bowden tube to the nozzle, the length of filament",
"E Steps On Ender 3 (V2/Pro)](https://makershop.co/how-to-calibrate-esteps-ender-3/), calibrated with and without",
"nozzle, the length of filament that is extruded is not",
"Steps On Ender 3 (V2/Pro)](https://makershop.co/how-to-calibrate-esteps-ender-3/), calibrated with and without the",
"before nozzle. But when I attach the Bowden tube and",
"terrible before calibration. Using this method now my prints are",
"air. But when I extrude from nozzle distance in much",
"prints are ok. Method is without Bowden tube, printer extrude",
"Bowden tube - on the another end before nozzle. But",
"Bowden tube, printer extrude in the air. But when I",
"But when I extrude from nozzle distance in much shorter.",
"working for only a few hours. How can I fix",
"the method from the link above. My prints were terrible",
"all wrong. I used the method from the link above.",
"and without the Bowden tube - on the another end",
"everything is correct, but when I attach the Bowden tube",
"from the link above. My prints were terrible before calibration.",
"- it is much shorter. Is that normal? The nozzle",
"almost new. It was working for only a few hours.",
"some prints and they were just fine. Before calibration, they",
"were terrible before calibration. Using this method now my prints",
"shorter. Is that normal? The nozzle is almost new. It",
"tried some prints and they were just fine. Before calibration,",
"extrude from nozzle distance in much shorter. Is that normal?",
"just fine. Before calibration, they were terrible. The method that",
"nozzle. But when I attach the Bowden tube and extrude,",
"extruder and everything is ok. When I extrude 100 mm",
"(V2/Pro)](https://makershop.co/how-to-calibrate-esteps-ender-3/), calibrated with and without the Bowden tube - on",
"new nozzle, or there is some another issue? I tried",
"or there is some another issue? I tried some prints",
"tube - on the another end before nozzle. But when",
"When I extrude 100 mm of filament, everything is correct,",
"was working for only a few hours. How can I",
"Bowden tube to the nozzle, the length of filament that",
"used to calibrate is described here, [Stupid Fast Way To",
"I extrude 100 mm of filament, everything is correct, but",
"another issue? I tried some prints and they were just",
"are ok. Method is without Bowden tube, printer extrude in",
"Way To Calibrate E Steps On Ender 3 (V2/Pro)](https://makershop.co/how-to-calibrate-esteps-ender-3/), calibrated",
"Is that normal? The nozzle is almost new. It was",
"they were just fine. Before calibration, they were terrible. The",
"How can I fix it? Do I need a new",
"ok. When I extrude 100 mm of filament, everything is",
"when I attach the Bowden tube to the nozzle, the",
"extrude, the nozzle is all wrong. I used the method",
"it? Do I need a new nozzle, or there is",
"100 mm of filament, everything is correct, but when I",
"need a new nozzle, or there is some another issue?",
"Calibrate E Steps On Ender 3 (V2/Pro)](https://makershop.co/how-to-calibrate-esteps-ender-3/), calibrated with and",
"and they were just fine. Before calibration, they were terrible.",
"link above. My prints were terrible before calibration. Using this",
"I have just calibrated my extruder and everything is ok.",
"there is some another issue? I tried some prints and",
"printer extrude in the air. But when I extrude from",
"before calibration. Using this method now my prints are ok.",
"tube to the nozzle, the length of filament that is",
"correct - it is much shorter. Is that normal? The",
"extrude 100 mm of filament, everything is correct, but when",
"in much shorter. Is that normal? Or is the method",
"Do I need a new nozzle, or there is some",
"Fast Way To Calibrate E Steps On Ender 3 (V2/Pro)](https://makershop.co/how-to-calibrate-esteps-ender-3/),",
"I tried some prints and they were just fine. Before",
"I attach the Bowden tube and extrude, the nozzle is",
"a new nozzle, or there is some another issue? I",
"mm of filament, everything is correct, but when I attach",
"of filament, everything is correct, but when I attach the",
"it is much shorter. Is that normal? The nozzle is",
"is described here, [Stupid Fast Way To Calibrate E Steps",
"without Bowden tube, printer extrude in the air. But when",
"end before nozzle. But when I attach the Bowden tube",
"my prints are ok. Method is without Bowden tube, printer",
"Or is the method used to calibrate correct and enough?",
"terrible. The method that I used to calibrate is described",
"to the nozzle, the length of filament that is extruded",
"The nozzle is almost new. It was working for only",
"were just fine. Before calibration, they were terrible. The method",
"the link above. My prints were terrible before calibration. Using",
"My prints were terrible before calibration. Using this method now",
"filament that is extruded is not correct - it is",
"Using this method now my prints are ok. Method is",
"normal? Or is the method used to calibrate correct and",
"prints were terrible before calibration. Using this method now my",
"fix it? Do I need a new nozzle, or there",
"they were terrible. The method that I used to calibrate",
"[Stupid Fast Way To Calibrate E Steps On Ender 3",
"is much shorter. Is that normal? The nozzle is almost",
"only a few hours. How can I fix it? Do",
"is almost new. It was working for only a few",
"issue? I tried some prints and they were just fine.",
"prints and they were just fine. Before calibration, they were",
"- on the another end before nozzle. But when I",
"few hours. How can I fix it? Do I need"
] |
[
"a box in Blender and exported that into an STL",
"this: [![Not so nice looking box](https://i.stack.imgur.com/O8lt1.png \"Not so nice looking",
"nice looking box](https://i.stack.imgur.com/O8lt1.png \"Not so nice looking box\")](https://i.stack.imgur.com/O8lt1.png \"Not so",
"like this: [![Nice looking box](https://i.stack.imgur.com/ScTFu.png \"Nice looking box\")](https://i.stack.imgur.com/ScTFu.png \"Nice looking",
"correct walls. The box looks like this: [![Nice looking box](https://i.stack.imgur.com/ScTFu.png",
"an STL file and it seems to be failing to",
"walls. The box looks like this: [![Nice looking box](https://i.stack.imgur.com/ScTFu.png \"Nice",
"looking box\") Is there something I'm exporting incorrectly or something",
"box](https://i.stack.imgur.com/ScTFu.png \"Nice looking box\")](https://i.stack.imgur.com/ScTFu.png \"Nice looking box\") But when I",
"be failing to render the correct walls. The box looks",
"looks like this: [![Nice looking box](https://i.stack.imgur.com/ScTFu.png \"Nice looking box\")](https://i.stack.imgur.com/ScTFu.png \"Nice",
"But when I open it in Cura, it looks like",
"it seems to be failing to render the correct walls.",
"so nice looking box](https://i.stack.imgur.com/O8lt1.png \"Not so nice looking box\")](https://i.stack.imgur.com/O8lt1.png \"Not",
"box\")](https://i.stack.imgur.com/ScTFu.png \"Nice looking box\") But when I open it in",
"box looks like this: [![Nice looking box](https://i.stack.imgur.com/ScTFu.png \"Nice looking box\")](https://i.stack.imgur.com/ScTFu.png",
"like this: [![Not so nice looking box](https://i.stack.imgur.com/O8lt1.png \"Not so nice",
"open it in Cura, it looks like this: [![Not so",
"Blender and exported that into an STL file and it",
"seems to be failing to render the correct walls. The",
"looks like this: [![Not so nice looking box](https://i.stack.imgur.com/O8lt1.png \"Not so",
"render the correct walls. The box looks like this: [![Nice",
"it in Cura, it looks like this: [![Not so nice",
"nice looking box\") Is there something I'm exporting incorrectly or",
"created a box in Blender and exported that into an",
"and exported that into an STL file and it seems",
"this: [![Nice looking box](https://i.stack.imgur.com/ScTFu.png \"Nice looking box\")](https://i.stack.imgur.com/ScTFu.png \"Nice looking box\")",
"when I open it in Cura, it looks like this:",
"nice looking box\")](https://i.stack.imgur.com/O8lt1.png \"Not so nice looking box\") Is there",
"box\") Is there something I'm exporting incorrectly or something else",
"box\")](https://i.stack.imgur.com/O8lt1.png \"Not so nice looking box\") Is there something I'm",
"looking box\")](https://i.stack.imgur.com/ScTFu.png \"Nice looking box\") But when I open it",
"box](https://i.stack.imgur.com/O8lt1.png \"Not so nice looking box\")](https://i.stack.imgur.com/O8lt1.png \"Not so nice looking",
"looking box\") But when I open it in Cura, it",
"I open it in Cura, it looks like this: [![Not",
"and it seems to be failing to render the correct",
"to render the correct walls. The box looks like this:",
"\"Nice looking box\")](https://i.stack.imgur.com/ScTFu.png \"Nice looking box\") But when I open",
"in Cura, it looks like this: [![Not so nice looking",
"the correct walls. The box looks like this: [![Nice looking",
"The box looks like this: [![Nice looking box](https://i.stack.imgur.com/ScTFu.png \"Nice looking",
"looking box](https://i.stack.imgur.com/O8lt1.png \"Not so nice looking box\")](https://i.stack.imgur.com/O8lt1.png \"Not so nice",
"looking box\")](https://i.stack.imgur.com/O8lt1.png \"Not so nice looking box\") Is there something",
"so nice looking box\") Is there something I'm exporting incorrectly",
"[![Not so nice looking box](https://i.stack.imgur.com/O8lt1.png \"Not so nice looking box\")](https://i.stack.imgur.com/O8lt1.png",
"I created a box in Blender and exported that into",
"looking box](https://i.stack.imgur.com/ScTFu.png \"Nice looking box\")](https://i.stack.imgur.com/ScTFu.png \"Nice looking box\") But when",
"Cura, it looks like this: [![Not so nice looking box](https://i.stack.imgur.com/O8lt1.png",
"so nice looking box\")](https://i.stack.imgur.com/O8lt1.png \"Not so nice looking box\") Is",
"\"Not so nice looking box\") Is there something I'm exporting",
"there something I'm exporting incorrectly or something else I'm missing?",
"\"Not so nice looking box\")](https://i.stack.imgur.com/O8lt1.png \"Not so nice looking box\")",
"it looks like this: [![Not so nice looking box](https://i.stack.imgur.com/O8lt1.png \"Not",
"to be failing to render the correct walls. The box",
"exported that into an STL file and it seems to",
"\"Nice looking box\") But when I open it in Cura,",
"in Blender and exported that into an STL file and",
"Is there something I'm exporting incorrectly or something else I'm",
"box in Blender and exported that into an STL file",
"STL file and it seems to be failing to render",
"that into an STL file and it seems to be",
"into an STL file and it seems to be failing",
"box\") But when I open it in Cura, it looks",
"failing to render the correct walls. The box looks like",
"file and it seems to be failing to render the",
"[![Nice looking box](https://i.stack.imgur.com/ScTFu.png \"Nice looking box\")](https://i.stack.imgur.com/ScTFu.png \"Nice looking box\") But"
] |
[
"file with PrusaSlicer. 2. Opened it in TextEdit. 3. Deleted",
"a G-code that only heats up the print bed and",
"the Z-axis up and down a little bit every 20",
"going off. This is what I have done: 1. Sliced",
"sure before I possibly break my printer or if there",
"want to make sure before I possibly break my printer",
"Just want to make sure before I possibly break my",
"down a little bit every 20 mins to prevent the",
"Opened it in TextEdit. 3. Deleted the G-code for: *",
"off. This is what I have done: 1. Sliced a",
"12 instances. I believe this should last a total of",
"and moves the Z-axis up and down a little bit",
"I Just want to make sure before I possibly break",
"Z190 Y140 F500, G4 S1200, G1 Z188, G1 Z190, ```",
"the G-code for: * the actual print * heating the",
"hours, right? I Just want to make sure before I",
"G1 Z190` command 11 times - total of 12 instances.",
"- total of 12 instances. I believe this should last",
"a total of slightly more than 4 hours, right? I",
"in TextEdit. 3. Deleted the G-code for: * the actual",
"with PrusaSlicer. 2. Opened it in TextEdit. 3. Deleted the",
"G-code: ``` G28, G1 Z190 Y140 F500, G4 S1200, G1",
"G1 Z190 Y140 F500, G4 S1200, G1 Z188, G1 Z190,",
"every 20 mins to prevent the safety timer going off.",
"print bed and moves the Z-axis up and down a",
"nozzle * waiting for the nozzle to heat up 4.",
"to heat the bed to 50 °C. 5. Inserted this",
"than 4 hours, right? I Just want to make sure",
"up 4. Changed the G-code to heat the bed to",
"``` 6. Copied and pasted `G4 S1200, G1 Z188, G1",
"heat the bed to 50 °C. 5. Inserted this G-code:",
"Y140 F500, G4 S1200, G1 Z188, G1 Z190, ``` 6.",
"up and down a little bit every 20 mins to",
"the G-code to heat the bed to 50 °C. 5.",
"that only heats up the print bed and moves the",
"G-code that only heats up the print bed and moves",
"trying to make a G-code that only heats up the",
"°C. 5. Inserted this G-code: ``` G28, G1 Z190 Y140",
"only heats up the print bed and moves the Z-axis",
"3. Deleted the G-code for: * the actual print *",
"for: * the actual print * heating the nozzle *",
"the nozzle * waiting for the nozzle to heat up",
"make a G-code that only heats up the print bed",
"moves the Z-axis up and down a little bit every",
"of 12 instances. I believe this should last a total",
"or if there is a better way to do this.",
"waiting for the nozzle to heat up 4. Changed the",
"heating the nozzle * waiting for the nozzle to heat",
"MK3, I'm trying to make a G-code that only heats",
"and pasted `G4 S1200, G1 Z188, G1 Z190` command 11",
"G-code for: * the actual print * heating the nozzle",
"* the actual print * heating the nozzle * waiting",
"a random file with PrusaSlicer. 2. Opened it in TextEdit.",
"Copied and pasted `G4 S1200, G1 Z188, G1 Z190` command",
"last a total of slightly more than 4 hours, right?",
"have done: 1. Sliced a random file with PrusaSlicer. 2.",
"heat up 4. Changed the G-code to heat the bed",
"2. Opened it in TextEdit. 3. Deleted the G-code for:",
"This is what I have done: 1. Sliced a random",
"done: 1. Sliced a random file with PrusaSlicer. 2. Opened",
"is what I have done: 1. Sliced a random file",
"to 50 °C. 5. Inserted this G-code: ``` G28, G1",
"Inserted this G-code: ``` G28, G1 Z190 Y140 F500, G4",
"G1 Z188, G1 Z190` command 11 times - total of",
"of slightly more than 4 hours, right? I Just want",
"Deleted the G-code for: * the actual print * heating",
"make sure before I possibly break my printer or if",
"the actual print * heating the nozzle * waiting for",
"``` G28, G1 Z190 Y140 F500, G4 S1200, G1 Z188,",
"20 mins to prevent the safety timer going off. This",
"before I possibly break my printer or if there is",
"possibly break my printer or if there is a better",
"I possibly break my printer or if there is a",
"should last a total of slightly more than 4 hours,",
"G28, G1 Z190 Y140 F500, G4 S1200, G1 Z188, G1",
"Z-axis up and down a little bit every 20 mins",
"prevent the safety timer going off. This is what I",
"believe this should last a total of slightly more than",
"random file with PrusaSlicer. 2. Opened it in TextEdit. 3.",
"it in TextEdit. 3. Deleted the G-code for: * the",
"Z190, ``` 6. Copied and pasted `G4 S1200, G1 Z188,",
"I believe this should last a total of slightly more",
"4 hours, right? I Just want to make sure before",
"Z188, G1 Z190` command 11 times - total of 12",
"total of 12 instances. I believe this should last a",
"bed to 50 °C. 5. Inserted this G-code: ``` G28,",
"the print bed and moves the Z-axis up and down",
"G-code to heat the bed to 50 °C. 5. Inserted",
"my Prusa MK3, I'm trying to make a G-code that",
"right? I Just want to make sure before I possibly",
"6. Copied and pasted `G4 S1200, G1 Z188, G1 Z190`",
"my printer or if there is a better way to",
"TextEdit. 3. Deleted the G-code for: * the actual print",
"instances. I believe this should last a total of slightly",
"S1200, G1 Z188, G1 Z190, ``` 6. Copied and pasted",
"I have done: 1. Sliced a random file with PrusaSlicer.",
"timer going off. This is what I have done: 1.",
"total of slightly more than 4 hours, right? I Just",
"Sliced a random file with PrusaSlicer. 2. Opened it in",
"actual print * heating the nozzle * waiting for the",
"slightly more than 4 hours, right? I Just want to",
"to heat up 4. Changed the G-code to heat the",
"break my printer or if there is a better way",
"PrusaSlicer. 2. Opened it in TextEdit. 3. Deleted the G-code",
"Z188, G1 Z190, ``` 6. Copied and pasted `G4 S1200,",
"heats up the print bed and moves the Z-axis up",
"more than 4 hours, right? I Just want to make",
"G1 Z188, G1 Z190, ``` 6. Copied and pasted `G4",
"G1 Z190, ``` 6. Copied and pasted `G4 S1200, G1",
"F500, G4 S1200, G1 Z188, G1 Z190, ``` 6. Copied",
"On my Prusa MK3, I'm trying to make a G-code",
"the safety timer going off. This is what I have",
"mins to prevent the safety timer going off. This is",
"1. Sliced a random file with PrusaSlicer. 2. Opened it",
"11 times - total of 12 instances. I believe this",
"4. Changed the G-code to heat the bed to 50",
"nozzle to heat up 4. Changed the G-code to heat",
"bed and moves the Z-axis up and down a little",
"* heating the nozzle * waiting for the nozzle to",
"the bed to 50 °C. 5. Inserted this G-code: ```",
"Changed the G-code to heat the bed to 50 °C.",
"times - total of 12 instances. I believe this should",
"S1200, G1 Z188, G1 Z190` command 11 times - total",
"to make sure before I possibly break my printer or",
"safety timer going off. This is what I have done:",
"Prusa MK3, I'm trying to make a G-code that only",
"for the nozzle to heat up 4. Changed the G-code",
"50 °C. 5. Inserted this G-code: ``` G28, G1 Z190",
"pasted `G4 S1200, G1 Z188, G1 Z190` command 11 times",
"up the print bed and moves the Z-axis up and",
"to prevent the safety timer going off. This is what",
"Z190` command 11 times - total of 12 instances. I",
"printer or if there is a better way to do",
"5. Inserted this G-code: ``` G28, G1 Z190 Y140 F500,",
"`G4 S1200, G1 Z188, G1 Z190` command 11 times -",
"the nozzle to heat up 4. Changed the G-code to",
"I'm trying to make a G-code that only heats up",
"print * heating the nozzle * waiting for the nozzle",
"* waiting for the nozzle to heat up 4. Changed",
"and down a little bit every 20 mins to prevent",
"G4 S1200, G1 Z188, G1 Z190, ``` 6. Copied and",
"this should last a total of slightly more than 4",
"this G-code: ``` G28, G1 Z190 Y140 F500, G4 S1200,",
"a little bit every 20 mins to prevent the safety",
"command 11 times - total of 12 instances. I believe",
"little bit every 20 mins to prevent the safety timer",
"to make a G-code that only heats up the print",
"what I have done: 1. Sliced a random file with",
"bit every 20 mins to prevent the safety timer going"
] |
[
"into 3D printing. I brought an Ender 6 and a",
"meter [kit](https://www.captubes.com/shop/#!/XS-Creality-Kit-2-Meter/p/123266814/category=23214267) is compatible with CR-10 and Ender 3. Is",
"However, the manufacturer (Captubes.com) only states that their 2 meter",
"manufacturer (Captubes.com) only states that their 2 meter [kit](https://www.captubes.com/shop/#!/XS-Creality-Kit-2-Meter/p/123266814/category=23214267) is",
"with CR-10 and Ender 3. Is this kit also compatible",
"new into 3D printing. I brought an Ender 6 and",
"replacing the Bowden tube for a Capricorn one. However, the",
"the manufacturer (Captubes.com) only states that their 2 meter [kit](https://www.captubes.com/shop/#!/XS-Creality-Kit-2-Meter/p/123266814/category=23214267)",
"compatible with CR-10 and Ender 3. Is this kit also",
"very new into 3D printing. I brought an Ender 6",
"I'm very new into 3D printing. I brought an Ender",
"cover. So I'm replacing the Bowden tube for a Capricorn",
"hole of the cover. So I'm replacing the Bowden tube",
"the standard white Bowden tube was too short to pass",
"[kit](https://www.captubes.com/shop/#!/XS-Creality-Kit-2-Meter/p/123266814/category=23214267) is compatible with CR-10 and Ender 3. Is this",
"is compatible with CR-10 and Ender 3. Is this kit",
"Bowden tube was too short to pass through the hole",
"pass through the hole of the cover. So I'm replacing",
"white Bowden tube was too short to pass through the",
"an Ender 6 and a cover for ABS printing, but",
"brought an Ender 6 and a cover for ABS printing,",
"the cover. So I'm replacing the Bowden tube for a",
"that their 2 meter [kit](https://www.captubes.com/shop/#!/XS-Creality-Kit-2-Meter/p/123266814/category=23214267) is compatible with CR-10 and",
"the Bowden tube for a Capricorn one. However, the manufacturer",
"to pass through the hole of the cover. So I'm",
"one. However, the manufacturer (Captubes.com) only states that their 2",
"(Captubes.com) only states that their 2 meter [kit](https://www.captubes.com/shop/#!/XS-Creality-Kit-2-Meter/p/123266814/category=23214267) is compatible",
"through the hole of the cover. So I'm replacing the",
"their 2 meter [kit](https://www.captubes.com/shop/#!/XS-Creality-Kit-2-Meter/p/123266814/category=23214267) is compatible with CR-10 and Ender",
"2 meter [kit](https://www.captubes.com/shop/#!/XS-Creality-Kit-2-Meter/p/123266814/category=23214267) is compatible with CR-10 and Ender 3.",
"and Ender 3. Is this kit also compatible with an",
"for ABS printing, but the standard white Bowden tube was",
"short to pass through the hole of the cover. So",
"3. Is this kit also compatible with an Ender 6?",
"a Capricorn one. However, the manufacturer (Captubes.com) only states that",
"for a Capricorn one. However, the manufacturer (Captubes.com) only states",
"Bowden tube for a Capricorn one. However, the manufacturer (Captubes.com)",
"3D printing. I brought an Ender 6 and a cover",
"standard white Bowden tube was too short to pass through",
"was too short to pass through the hole of the",
"Capricorn one. However, the manufacturer (Captubes.com) only states that their",
"6 and a cover for ABS printing, but the standard",
"I brought an Ender 6 and a cover for ABS",
"I'm replacing the Bowden tube for a Capricorn one. However,",
"a cover for ABS printing, but the standard white Bowden",
"printing. I brought an Ender 6 and a cover for",
"the hole of the cover. So I'm replacing the Bowden",
"printing, but the standard white Bowden tube was too short",
"and a cover for ABS printing, but the standard white",
"too short to pass through the hole of the cover.",
"of the cover. So I'm replacing the Bowden tube for",
"So I'm replacing the Bowden tube for a Capricorn one.",
"cover for ABS printing, but the standard white Bowden tube",
"Ender 3. Is this kit also compatible with an Ender",
"only states that their 2 meter [kit](https://www.captubes.com/shop/#!/XS-Creality-Kit-2-Meter/p/123266814/category=23214267) is compatible with",
"ABS printing, but the standard white Bowden tube was too",
"but the standard white Bowden tube was too short to",
"CR-10 and Ender 3. Is this kit also compatible with",
"tube for a Capricorn one. However, the manufacturer (Captubes.com) only",
"states that their 2 meter [kit](https://www.captubes.com/shop/#!/XS-Creality-Kit-2-Meter/p/123266814/category=23214267) is compatible with CR-10",
"tube was too short to pass through the hole of",
"Ender 6 and a cover for ABS printing, but the"
] |
[
"exist a good way to do the join between parts?",
"the best way to print an action figure? If the",
"to do the join between parts? My 3d printer is",
"If I separate the part, the time is concise, but",
"is Elegoo Mars, so I use Chitubox. [](https://i.stack.imgur.com/xTWE0.png)",
"an action figure and would like to print it. Anyway,",
"I have created an action figure and would like to",
"and would like to print it. Anyway, I am not",
"printer is Elegoo Mars, so I use Chitubox. [![enter image",
"but I need to do some changes to my file.",
"figure? If the second method is the better (separate arm,",
"be printed only once but the duration is 10 hours.",
"between parts? My 3d printer is Elegoo Mars, so I",
"to print it, the action figure can be printed only",
"an action figure? If the second method is the better",
"is 10 hours. If I separate the part, the time",
"concise, but I need to do some changes to my",
"the second method is the better (separate arm, legs, etc.),",
"legs, etc.), does exist a good way to do the",
"it, the action figure can be printed only once but",
"parts? My 3d printer is Elegoo Mars, so I use",
"action figure? If the second method is the better (separate",
"separate the part, the time is concise, but I need",
"sure the best way to print it, the action figure",
"way to do the join between parts? My 3d printer",
"do the join between parts? My 3d printer is Elegoo",
"way to print an action figure? If the second method",
"to print it. Anyway, I am not sure the best",
"once but the duration is 10 hours. If I separate",
"print an action figure? If the second method is the",
"better (separate arm, legs, etc.), does exist a good way",
"Anyway, I am not sure the best way to print",
"figure and would like to print it. Anyway, I am",
"is concise, but I need to do some changes to",
"(separate arm, legs, etc.), does exist a good way to",
"etc.), does exist a good way to do the join",
"3d printer is Elegoo Mars, so I use Chitubox. [![enter",
"best way to print it, the action figure can be",
"is the better (separate arm, legs, etc.), does exist a",
"best way to print an action figure? If the second",
"can be printed only once but the duration is 10",
"10 hours. If I separate the part, the time is",
"the best way to print it, the action figure can",
"changes to my file. What is the best way to",
"hours. If I separate the part, the time is concise,",
"the join between parts? My 3d printer is Elegoo Mars,",
"good way to do the join between parts? My 3d",
"does exist a good way to do the join between",
"to my file. What is the best way to print",
"join between parts? My 3d printer is Elegoo Mars, so",
"time is concise, but I need to do some changes",
"like to print it. Anyway, I am not sure the",
"but the duration is 10 hours. If I separate the",
"created an action figure and would like to print it."
] |
[
"bed to reach target temperature, heat hot-end, wait to reach",
"target temperature - that causes them to reach their target",
"baking unmoving filament in the nozzle for much longer than",
"recognized as a valid substitution. How can I achieve the",
"temperature simultaneously and then wait for both, but then I'll",
"printer's hot end heats up way faster than the bed.",
"than the bed. Still, it takes its sweet time, and",
"temperature - that causes them to reach their target temperatures",
"``` Sure I could start heating both to target temperature",
"like to do is to start heating the nozzle when",
"heating both to target temperature simultaneously and then wait for",
"necessary. What I'd like to do is to start heating",
"bed to reach temp M104 S{material_print_temperature_layer_0} ;Start heating extruder M109",
"heating extruder M190 S{material_bed_temperature_layer_0} ;Wait for bed to reach temp",
"is to start heating the nozzle when the bed is",
"Except `S{material_bed_temperature_layer_0 - 20}` isn't recognized as a valid substitution.",
"nozzle when the bed is about 20 °C short of",
"`S{material_bed_temperature_layer_0 - 20}` isn't recognized as a valid substitution. How",
"S{material_bed_temperature_layer_0} ;Wait for bed to reach temp M104 S{material_print_temperature_layer_0} ;Start",
";Start heating extruder M109 S{material_print_temperature_layer_0} ;Wait for extruder to reach",
"``` M140 S{material_bed_temperature_layer_0} ;Start heating bed M190 S{material_bed_temperature_layer_0 - 20}",
"M140 S{material_bed_temperature_layer_0} ;Start heating bed M190 S{material_bed_temperature_layer_0} ;Wait for bed",
"then I'll be baking unmoving filament in the nozzle for",
"faster than the bed. Still, it takes its sweet time,",
"I'll be baking unmoving filament in the nozzle for much",
"unmoving filament in the nozzle for much longer than necessary.",
"``` M140 S{material_bed_temperature_layer_0} ;Start heating bed M190 S{material_bed_temperature_layer_0} ;Wait for",
"to reach temp ``` Sure I could start heating both",
"of: ``` M140 S{material_bed_temperature_layer_0} ;Start heating bed M190 S{material_bed_temperature_layer_0 -",
"to reach temp M104 S{material_print_temperature_layer_0} ;Start heating extruder M109 S{material_print_temperature_layer_0}",
"reach their target temperatures nearly simultaneously. Something along the lines",
"a valid substitution. How can I achieve the desired effect?",
"reach temp M104 S{material_print_temperature_layer_0} ;Start heating extruder M109 S{material_print_temperature_layer_0} ;Wait",
"be 20 degrees before target M104 S{material_print_temperature_layer_0} ;Start heating extruder",
"extruder M109 S{material_print_temperature_layer_0} ;Wait for extruder to reach temp ```",
"to do is to start heating the nozzle when the",
"degrees before target M104 S{material_print_temperature_layer_0} ;Start heating extruder M190 S{material_bed_temperature_layer_0}",
"M109 S{material_print_temperature_layer_0} ;Wait for extruder to reach temp ``` Except",
"simultaneously. Something along the lines of: ``` M140 S{material_bed_temperature_layer_0} ;Start",
"heating the nozzle when the bed is about 20 °C",
"to reach temp M109 S{material_print_temperature_layer_0} ;Wait for extruder to reach",
"that causes them to reach their target temperatures nearly simultaneously.",
"but then I'll be baking unmoving filament in the nozzle",
"in the nozzle for much longer than necessary. What I'd",
"considerably more that it should. ``` M140 S{material_bed_temperature_layer_0} ;Start heating",
"time, and Cura's default startup sequence: heat the bed, wait",
"and then wait for both, but then I'll be baking",
"its target temperature - that causes them to reach their",
"Sure I could start heating both to target temperature simultaneously",
"both, but then I'll be baking unmoving filament in the",
"to reach their target temperatures nearly simultaneously. Something along the",
"for bed to reach target temperature, heat hot-end, wait to",
"reach temp M109 S{material_print_temperature_layer_0} ;Wait for extruder to reach temp",
"takes considerably more that it should. ``` M140 S{material_bed_temperature_layer_0} ;Start",
";Start heating bed M190 S{material_bed_temperature_layer_0} ;Wait for bed to reach",
"S{material_print_temperature_layer_0} ;Wait for extruder to reach temp ``` Sure I",
";Wait for extruder to reach temp ``` Sure I could",
"20} ;Wait for bed to be 20 degrees before target",
"to reach target temperature, heat hot-end, wait to reach hot-end",
"hot-end, wait to reach hot-end temperature, proceed - takes considerably",
"nearly simultaneously. Something along the lines of: ``` M140 S{material_bed_temperature_layer_0}",
"to reach hot-end temperature, proceed - takes considerably more that",
"for both, but then I'll be baking unmoving filament in",
"filament in the nozzle for much longer than necessary. What",
"Cura's default startup sequence: heat the bed, wait for bed",
"target temperature, heat hot-end, wait to reach hot-end temperature, proceed",
"temperature, proceed - takes considerably more that it should. ```",
"hot-end temperature, proceed - takes considerably more that it should.",
"wait for bed to reach target temperature, heat hot-end, wait",
"bed to be 20 degrees before target M104 S{material_print_temperature_layer_0} ;Start",
"to target temperature simultaneously and then wait for both, but",
"bed M190 S{material_bed_temperature_layer_0 - 20} ;Wait for bed to be",
"and Cura's default startup sequence: heat the bed, wait for",
"sweet time, and Cura's default startup sequence: heat the bed,",
"of its target temperature - that causes them to reach",
"along the lines of: ``` M140 S{material_bed_temperature_layer_0} ;Start heating bed",
"the bed is about 20 °C short of its target",
"- 20} ;Wait for bed to be 20 degrees before",
"should. ``` M140 S{material_bed_temperature_layer_0} ;Start heating bed M190 S{material_bed_temperature_layer_0} ;Wait",
"it takes its sweet time, and Cura's default startup sequence:",
"lines of: ``` M140 S{material_bed_temperature_layer_0} ;Start heating bed M190 S{material_bed_temperature_layer_0",
"bed, wait for bed to reach target temperature, heat hot-end,",
"the nozzle for much longer than necessary. What I'd like",
";Wait for bed to be 20 degrees before target M104",
"then wait for both, but then I'll be baking unmoving",
"extruder to reach temp ``` Sure I could start heating",
"startup sequence: heat the bed, wait for bed to reach",
"M190 S{material_bed_temperature_layer_0} ;Wait for bed to reach temp M104 S{material_print_temperature_layer_0}",
"reach temp ``` Sure I could start heating both to",
"heating bed M190 S{material_bed_temperature_layer_0 - 20} ;Wait for bed to",
"reach target temperature, heat hot-end, wait to reach hot-end temperature,",
";Wait for bed to reach temp M104 S{material_print_temperature_layer_0} ;Start heating",
"target temperature simultaneously and then wait for both, but then",
"takes its sweet time, and Cura's default startup sequence: heat",
"its sweet time, and Cura's default startup sequence: heat the",
"short of its target temperature - that causes them to",
"for bed to be 20 degrees before target M104 S{material_print_temperature_layer_0}",
"as a valid substitution. How can I achieve the desired",
"much longer than necessary. What I'd like to do is",
";Start heating extruder M190 S{material_bed_temperature_layer_0} ;Wait for bed to reach",
"- 20}` isn't recognized as a valid substitution. How can",
"20 degrees before target M104 S{material_print_temperature_layer_0} ;Start heating extruder M190",
"causes them to reach their target temperatures nearly simultaneously. Something",
"20}` isn't recognized as a valid substitution. How can I",
"S{material_bed_temperature_layer_0} ;Wait for bed to reach temp M109 S{material_print_temperature_layer_0} ;Wait",
"I'd like to do is to start heating the nozzle",
"simultaneously and then wait for both, but then I'll be",
"extruder M190 S{material_bed_temperature_layer_0} ;Wait for bed to reach temp M109",
";Wait for extruder to reach temp ``` Except `S{material_bed_temperature_layer_0 -",
"sequence: heat the bed, wait for bed to reach target",
"What I'd like to do is to start heating the",
"is about 20 °C short of its target temperature -",
"heat hot-end, wait to reach hot-end temperature, proceed - takes",
"bed. Still, it takes its sweet time, and Cura's default",
"the lines of: ``` M140 S{material_bed_temperature_layer_0} ;Start heating bed M190",
"temp ``` Sure I could start heating both to target",
"Still, it takes its sweet time, and Cura's default startup",
"heating extruder M109 S{material_print_temperature_layer_0} ;Wait for extruder to reach temp",
"them to reach their target temperatures nearly simultaneously. Something along",
"bed M190 S{material_bed_temperature_layer_0} ;Wait for bed to reach temp M104",
"more that it should. ``` M140 S{material_bed_temperature_layer_0} ;Start heating bed",
"start heating the nozzle when the bed is about 20",
"both to target temperature simultaneously and then wait for both,",
"do is to start heating the nozzle when the bed",
"bed to reach temp M109 S{material_print_temperature_layer_0} ;Wait for extruder to",
"to start heating the nozzle when the bed is about",
"My printer's hot end heats up way faster than the",
"S{material_bed_temperature_layer_0} ;Start heating bed M190 S{material_bed_temperature_layer_0 - 20} ;Wait for",
"longer than necessary. What I'd like to do is to",
"Something along the lines of: ``` M140 S{material_bed_temperature_layer_0} ;Start heating",
"M140 S{material_bed_temperature_layer_0} ;Start heating bed M190 S{material_bed_temperature_layer_0 - 20} ;Wait",
"end heats up way faster than the bed. Still, it",
"extruder to reach temp ``` Except `S{material_bed_temperature_layer_0 - 20}` isn't",
"S{material_print_temperature_layer_0} ;Start heating extruder M190 S{material_bed_temperature_layer_0} ;Wait for bed to",
"default startup sequence: heat the bed, wait for bed to",
"hot end heats up way faster than the bed. Still,",
"when the bed is about 20 °C short of its",
"before target M104 S{material_print_temperature_layer_0} ;Start heating extruder M190 S{material_bed_temperature_layer_0} ;Wait",
"isn't recognized as a valid substitution. How can I achieve",
"up way faster than the bed. Still, it takes its",
"temperatures nearly simultaneously. Something along the lines of: ``` M140",
"M190 S{material_bed_temperature_layer_0} ;Wait for bed to reach temp M109 S{material_print_temperature_layer_0}",
"could start heating both to target temperature simultaneously and then",
"temperature, heat hot-end, wait to reach hot-end temperature, proceed -",
"I could start heating both to target temperature simultaneously and",
"heat the bed, wait for bed to reach target temperature,",
"the bed. Still, it takes its sweet time, and Cura's",
"for bed to reach temp M109 S{material_print_temperature_layer_0} ;Wait for extruder",
"M104 S{material_print_temperature_layer_0} ;Start heating extruder M109 S{material_print_temperature_layer_0} ;Wait for extruder",
"proceed - takes considerably more that it should. ``` M140",
"start heating both to target temperature simultaneously and then wait",
"20 °C short of its target temperature - that causes",
"that it should. ``` M140 S{material_bed_temperature_layer_0} ;Start heating bed M190",
"target M104 S{material_print_temperature_layer_0} ;Start heating extruder M190 S{material_bed_temperature_layer_0} ;Wait for",
"wait to reach hot-end temperature, proceed - takes considerably more",
"bed is about 20 °C short of its target temperature",
"temp M109 S{material_print_temperature_layer_0} ;Wait for extruder to reach temp ```",
"reach hot-end temperature, proceed - takes considerably more that it",
"S{material_bed_temperature_layer_0 - 20} ;Wait for bed to be 20 degrees",
"be baking unmoving filament in the nozzle for much longer",
"- that causes them to reach their target temperatures nearly",
";Wait for bed to reach temp M109 S{material_print_temperature_layer_0} ;Wait for",
"S{material_print_temperature_layer_0} ;Wait for extruder to reach temp ``` Except `S{material_bed_temperature_layer_0",
"nozzle for much longer than necessary. What I'd like to",
"heats up way faster than the bed. Still, it takes",
"``` Except `S{material_bed_temperature_layer_0 - 20}` isn't recognized as a valid",
"wait for both, but then I'll be baking unmoving filament",
"the bed, wait for bed to reach target temperature, heat",
"heating bed M190 S{material_bed_temperature_layer_0} ;Wait for bed to reach temp",
"for much longer than necessary. What I'd like to do",
"target temperatures nearly simultaneously. Something along the lines of: ```",
"the nozzle when the bed is about 20 °C short",
"S{material_print_temperature_layer_0} ;Start heating extruder M109 S{material_print_temperature_layer_0} ;Wait for extruder to",
"M190 S{material_bed_temperature_layer_0 - 20} ;Wait for bed to be 20",
"way faster than the bed. Still, it takes its sweet",
"M109 S{material_print_temperature_layer_0} ;Wait for extruder to reach temp ``` Sure",
"- takes considerably more that it should. ``` M140 S{material_bed_temperature_layer_0}",
"about 20 °C short of its target temperature - that",
"temp ``` Except `S{material_bed_temperature_layer_0 - 20}` isn't recognized as a",
"to reach temp ``` Except `S{material_bed_temperature_layer_0 - 20}` isn't recognized",
"to be 20 degrees before target M104 S{material_print_temperature_layer_0} ;Start heating",
"their target temperatures nearly simultaneously. Something along the lines of:",
"than necessary. What I'd like to do is to start",
"temp M104 S{material_print_temperature_layer_0} ;Start heating extruder M109 S{material_print_temperature_layer_0} ;Wait for",
"reach temp ``` Except `S{material_bed_temperature_layer_0 - 20}` isn't recognized as",
";Start heating bed M190 S{material_bed_temperature_layer_0 - 20} ;Wait for bed",
"M104 S{material_print_temperature_layer_0} ;Start heating extruder M190 S{material_bed_temperature_layer_0} ;Wait for bed",
"for bed to reach temp M104 S{material_print_temperature_layer_0} ;Start heating extruder",
"for extruder to reach temp ``` Except `S{material_bed_temperature_layer_0 - 20}`",
"°C short of its target temperature - that causes them",
"it should. ``` M140 S{material_bed_temperature_layer_0} ;Start heating bed M190 S{material_bed_temperature_layer_0}",
"S{material_bed_temperature_layer_0} ;Start heating bed M190 S{material_bed_temperature_layer_0} ;Wait for bed to",
"for extruder to reach temp ``` Sure I could start"
] |
[
"card. (the exact name of the file is [`3-Cat.gcode`](https://drive.google.com/file/d/1Cnv37A2r_2v_kqtlao5ZksMwqx6ZEsPO/view?usp=sharing)) This",
"printed this figurine six times already, in different colors and",
"The print is so perfect that I can't believe it.",
"seam at all! The print is so perfect that I",
"is possible is the prepared G-code added to the Ender",
"**perfect**! What do you think about it? Can this be",
"Seam in diferent retraction distance (retract on layer change turned",
"don't know where.) Seam in diferent retraction distance (retract on",
"little figurine has no seam at all! The print is",
"seam is hidden inside the printed object, not on its",
"distance (retract on layer change turned on): [](https://i.stack.imgur.com/lSuBG.jpg)",
"such G-codes so that the seam is hidden inside the",
"this be done in a slicer? (I can add this",
"exact name of the file is [`3-Cat.gcode`](https://drive.google.com/file/d/1Cnv37A2r_2v_kqtlao5ZksMwqx6ZEsPO/view?usp=sharing)) This little figurine",
"Can this be done in a slicer? (I can add",
"in diferent retraction distance (retract on layer change turned on):",
"this file somewhere but I don't know where.) Seam in",
"I can't believe it. The question is why slicers don't",
"be done in a slicer? (I can add this file",
"figurine six times already, in different colors and different brands",
"is hidden inside the printed object, not on its wall.",
"slicers don't create such G-codes so that the seam is",
"(I can add this file somewhere but I don't know",
"perfect that I can't believe it. The question is why",
"to eliminate this problem. And the proof that it is",
"add this file somewhere but I don't know where.) Seam",
"prints are **perfect**! What do you think about it? Can",
"the proof that it is possible is the prepared G-code",
"the SD card. (the exact name of the file is",
"SD card. (the exact name of the file is [`3-Cat.gcode`](https://drive.google.com/file/d/1Cnv37A2r_2v_kqtlao5ZksMwqx6ZEsPO/view?usp=sharing))",
"is why slicers don't create such G-codes so that the",
"the printed object, not on its wall. I have printed",
"is the prepared G-code added to the Ender printer on",
"And the proof that it is possible is the prepared",
"filament. All prints are **perfect**! What do you think about",
"The question is why slicers don't create such G-codes so",
"an attempt to eliminate this problem. And the proof that",
"are **perfect**! What do you think about it? Can this",
"brands of filament. All prints are **perfect**! What do you",
"do you think about it? Can this be done in",
"nowhere there is an attempt to eliminate this problem. And",
"is an attempt to eliminate this problem. And the proof",
"of filament. All prints are **perfect**! What do you think",
"the prepared G-code added to the Ender printer on the",
"name of the file is [`3-Cat.gcode`](https://drive.google.com/file/d/1Cnv37A2r_2v_kqtlao5ZksMwqx6ZEsPO/view?usp=sharing)) This little figurine has",
"is so perfect that I can't believe it. The question",
"don't create such G-codes so that the seam is hidden",
"about it? Can this be done in a slicer? (I",
"diferent retraction distance (retract on layer change turned on): [) This little figurine has no seam at",
"at all! The print is so perfect that I can't",
"hidden inside the printed object, not on its wall. I",
"already, in different colors and different brands of filament. All",
"but I don't know where.) Seam in diferent retraction distance",
"on its wall. I have printed this figurine six times",
"the seam is hidden inside the printed object, not on",
"but nowhere there is an attempt to eliminate this problem.",
"all! The print is so perfect that I can't believe",
"a slicer? (I can add this file somewhere but I",
"how to **try** to \"hide\" the seam, but nowhere there",
"printed object, not on its wall. I have printed this",
"the Ender printer on the SD card. (the exact name",
"that the seam is hidden inside the printed object, not",
"why slicers don't create such G-codes so that the seam",
"is [`3-Cat.gcode`](https://drive.google.com/file/d/1Cnv37A2r_2v_kqtlao5ZksMwqx6ZEsPO/view?usp=sharing)) This little figurine has no seam at all!",
"in a slicer? (I can add this file somewhere but",
"of the file is [`3-Cat.gcode`](https://drive.google.com/file/d/1Cnv37A2r_2v_kqtlao5ZksMwqx6ZEsPO/view?usp=sharing)) This little figurine has no",
"on the SD card. (the exact name of the file",
"(the exact name of the file is [`3-Cat.gcode`](https://drive.google.com/file/d/1Cnv37A2r_2v_kqtlao5ZksMwqx6ZEsPO/view?usp=sharing)) This little",
"colors and different brands of filament. All prints are **perfect**!",
"I have printed this figurine six times already, in different",
"print is so perfect that I can't believe it. The",
"wall. I have printed this figurine six times already, in",
"so perfect that I can't believe it. The question is",
"problem. And the proof that it is possible is the",
"its wall. I have printed this figurine six times already,",
"can't believe it. The question is why slicers don't create",
"times already, in different colors and different brands of filament.",
"attempt to eliminate this problem. And the proof that it",
"G-code added to the Ender printer on the SD card.",
"All prints are **perfect**! What do you think about it?",
"it is possible is the prepared G-code added to the",
"and different brands of filament. All prints are **perfect**! What",
"different colors and different brands of filament. All prints are",
"think about it? Can this be done in a slicer?",
"it? Can this be done in a slicer? (I can",
"have printed this figurine six times already, in different colors",
"where.) Seam in diferent retraction distance (retract on layer change",
"(retract on layer change turned on): [) This little figurine has no seam",
"[`3-Cat.gcode`](https://drive.google.com/file/d/1Cnv37A2r_2v_kqtlao5ZksMwqx6ZEsPO/view?usp=sharing)) This little figurine has no seam at all! The",
"file somewhere but I don't know where.) Seam in diferent",
"has no seam at all! The print is so perfect",
"Ender printer on the SD card. (the exact name of",
"that I can't believe it. The question is why slicers",
"question is why slicers don't create such G-codes so that",
"Everywhere you can read how to **try** to \"hide\" the",
"read how to **try** to \"hide\" the seam, but nowhere",
"it. The question is why slicers don't create such G-codes",
"not on its wall. I have printed this figurine six",
"prepared G-code added to the Ender printer on the SD",
"added to the Ender printer on the SD card. (the",
"possible is the prepared G-code added to the Ender printer",
"slicer? (I can add this file somewhere but I don't",
"What do you think about it? Can this be done"
] |
[
"Thermal Runaway Protection does not work here. The TRP detects",
"a jump of 100 °C in 30 seconds, meaning if",
"port, then disconnecting and powering on without the Raspberry Pi",
"prevents the printer from powering on - everything appears dead",
"BigTreeTech Octopus v1.1 loaded with Klipper firmware * MicroSwiss direct-drive",
"to the best that it can, plateauing around 60 °C.",
"to drive motors or run the extruder. RESULT: thermal runaway",
"* BigTreeTech Octopus v1.1 loaded with Klipper firmware * MicroSwiss",
"hit thermal runaway: 1. Turn on power switch for the",
"to hit thermal runaway: 1. Turn on power switch for",
"I've tried: * **Powering on using the power from the",
"ability to control the heating tube. Instead, Klipper shuts down",
"please reverse the heating tube connectors on mainboard\"*; RESULT: prevents",
"firmware * MicroSwiss direct-drive New configuration: * Ender 3 pro",
"runaway to the best that it can, plateauing around 60",
"and the heating tube keeps running away. Each time I've",
"port** - this powers on the printer but will error",
"Klipper doesn't seem to have any ability to control the",
"absence of the Raspberry Pi, it still reaches a runaway",
"TRP detects and triggers, but Klipper doesn't seem to have",
"for me that in the absence of the Raspberry Pi,",
"the printer has power, it will power the heating tube",
"the cables to the correct polarities returns it to a",
"keeps running away. Each time I've had to cut the",
"to the correct polarities returns it to a runaway state.",
"time I've had to cut the power manually. Additional things",
"the power manually. Additional things that I've tried: * **Powering",
"the best that it can, plateauing around 60 °C. *",
"- this powers on the printer but will error on",
"on any attempt to drive motors or run the extruder.",
"thermal runaway: 1. Turn on power switch for the Ender",
"Instead, Klipper shuts down and the heating tube keeps running",
"on power switch for the Ender 3 Pro. NOTE: Thermal",
"everything appears dead and returning the cables to the correct",
"extruder and hotend for a Creality Sprite Pro on my",
"100 °C in 30 seconds, meaning if the printer has",
"attempt to drive motors or run the extruder. RESULT: thermal",
"manually showed a jump of 100 °C in 30 seconds,",
"(working) configuration: * Ender 3 pro * BigTreeTech Octopus v1.1",
"printer restarts during hotend heating up, please reverse the heating",
"* BigTreeTech Octopus v1.1 loaded with klipper firmware * Creality",
"had to cut the power manually. Additional things that I've",
"with as much as it can. * **Reversing the +",
"upgraded mother board to the BigTreeTech Octopus v1.1 and I'm",
"around 60 °C. * **Powering on using the power from",
"the power from the Raspberry Pi's USB port** - this",
"°C. * **Powering on using the power from the Raspberry",
"me that in the absence of the Raspberry Pi, it",
"motors or run the extruder. RESULT: thermal runaway to the",
"the Raspberry Pi's USB port** - this powers on the",
"NOTE: Thermal Runaway Protection does not work here. The TRP",
"cut the power manually. Additional things that I've tried: *",
"with klipper firmware * Creality Sprite Pro Steps that I'm",
"it can, plateauing around 60 °C. * **Powering on using",
"power-on. Previous (working) configuration: * Ender 3 pro * BigTreeTech",
"Protection does not work here. The TRP detects and triggers,",
"The TRP detects and triggers, but Klipper doesn't seem to",
"showed a jump of 100 °C in 30 seconds, meaning",
"restarts during hotend heating up, please reverse the heating tube",
"direct-drive extruder and hotend for a Creality Sprite Pro on",
"seconds, meaning if the printer has power, it will power",
"using the power from the Raspberry Pi's USB port, then",
"it will power the heating tube with as much as",
"my Ender 3 with an upgraded mother board to the",
"then powering down and reconnecting the Raspberry Pi** - this",
"for the Ender 3 Pro. NOTE: Thermal Runaway Protection does",
"Octopus v1.1 loaded with Klipper firmware * MicroSwiss direct-drive New",
"MicroSwiss direct-drive extruder and hotend for a Creality Sprite Pro",
"before and after powering manually showed a jump of 100",
"appears dead and returning the cables to the correct polarities",
"the heating tube. Instead, Klipper shuts down and the heating",
"meaning if the printer has power, it will power the",
"I've had to cut the power manually. Additional things that",
"powering down and reconnecting the Raspberry Pi** - this confirms",
"the Raspberry Pi connected, then powering down and reconnecting the",
"on power-on. Previous (working) configuration: * Ender 3 pro *",
"on using the power from the Raspberry Pi's USB port**",
"power the heating tube with as much as it can.",
"this powers on the printer but will error on any",
"or run the extruder. RESULT: thermal runaway to the best",
"°C in 30 seconds, meaning if the printer has power,",
"control the heating tube. Instead, Klipper shuts down and the",
"tube connectors on mainboard\"*; RESULT: prevents the printer from powering",
"error on any attempt to drive motors or run the",
"manually. Additional things that I've tried: * **Powering on using",
"and I'm experiencing thermal runaway on power-on. Previous (working) configuration:",
"extruder. RESULT: thermal runaway to the best that it can,",
"Raspberry Pi connected, then powering down and reconnecting the Raspberry",
"Pi, it still reaches a runaway state; RESULT: monitoring before",
"power manually. Additional things that I've tried: * **Powering on",
"* Ender 3 pro * BigTreeTech Octopus v1.1 loaded with",
"monitoring before and after powering manually showed a jump of",
"confirms for me that in the absence of the Raspberry",
"the Raspberry Pi's USB port, then disconnecting and powering on",
"is the recommendation in the instruction manual, *\"If 3D printer",
"3 pro * BigTreeTech Octopus v1.1 loaded with Klipper firmware",
"this confirms for me that in the absence of the",
"3 with an upgraded mother board to the BigTreeTech Octopus",
"a Creality Sprite Pro on my Ender 3 with an",
"Creality Sprite Pro on my Ender 3 with an upgraded",
"connected, then powering down and reconnecting the Raspberry Pi** -",
"away. Each time I've had to cut the power manually.",
"with Klipper firmware * MicroSwiss direct-drive New configuration: * Ender",
"any attempt to drive motors or run the extruder. RESULT:",
"a runaway state; RESULT: monitoring before and after powering manually",
"in 30 seconds, meaning if the printer has power, it",
"USB port** - this powers on the printer but will",
"Raspberry Pi's USB port** - this powers on the printer",
"3 Pro. NOTE: Thermal Runaway Protection does not work here.",
"down and the heating tube keeps running away. Each time",
"printer has power, it will power the heating tube with",
"Octopus v1.1 and I'm experiencing thermal runaway on power-on. Previous",
"then disconnecting and powering on without the Raspberry Pi connected,",
"for a Creality Sprite Pro on my Ender 3 with",
"*\"If 3D printer restarts during hotend heating up, please reverse",
"recommendation in the instruction manual, *\"If 3D printer restarts during",
"of the Raspberry Pi, it still reaches a runaway state;",
"the extruder. RESULT: thermal runaway to the best that it",
"Pro on my Ender 3 with an upgraded mother board",
"still reaches a runaway state; RESULT: monitoring before and after",
"that I'm taking to hit thermal runaway: 1. Turn on",
"heating tube connectors on mainboard\"*; RESULT: prevents the printer from",
"will power the heating tube with as much as it",
"from the Raspberry Pi's USB port, then disconnecting and powering",
"and hotend for a Creality Sprite Pro on my Ender",
"power from the Raspberry Pi's USB port, then disconnecting and",
"powering manually showed a jump of 100 °C in 30",
"an upgraded mother board to the BigTreeTech Octopus v1.1 and",
"Klipper firmware * MicroSwiss direct-drive New configuration: * Ender 3",
"Ender 3 pro * BigTreeTech Octopus v1.1 loaded with Klipper",
"and triggers, but Klipper doesn't seem to have any ability",
"RESULT: prevents the printer from powering on - everything appears",
"* **Powering on using the power from the Raspberry Pi's",
"Ender 3 with an upgraded mother board to the BigTreeTech",
"the Ender 3 Pro. NOTE: Thermal Runaway Protection does not",
"Sprite Pro Steps that I'm taking to hit thermal runaway:",
"powering on without the Raspberry Pi connected, then powering down",
"power switch for the Ender 3 Pro. NOTE: Thermal Runaway",
"to cut the power manually. Additional things that I've tried:",
"but will error on any attempt to drive motors or",
"state; RESULT: monitoring before and after powering manually showed a",
"MicroSwiss direct-drive New configuration: * Ender 3 pro * BigTreeTech",
"RESULT: monitoring before and after powering manually showed a jump",
"pro * BigTreeTech Octopus v1.1 loaded with klipper firmware *",
"after powering manually showed a jump of 100 °C in",
"experiencing thermal runaway on power-on. Previous (working) configuration: * Ender",
"Creality Sprite Pro Steps that I'm taking to hit thermal",
"the heating tube connectors on mainboard\"*; RESULT: prevents the printer",
"Pro Steps that I'm taking to hit thermal runaway: 1.",
"Pi's USB port** - this powers on the printer but",
"firmware * Creality Sprite Pro Steps that I'm taking to",
"does not work here. The TRP detects and triggers, but",
"that I've tried: * **Powering on using the power from",
"the + and - wires** - this is the recommendation",
"- this confirms for me that in the absence of",
"detects and triggers, but Klipper doesn't seem to have any",
"Turn on power switch for the Ender 3 Pro. NOTE:",
"Klipper shuts down and the heating tube keeps running away.",
"it can. * **Reversing the + and - wires** -",
"have any ability to control the heating tube. Instead, Klipper",
"taking to hit thermal runaway: 1. Turn on power switch",
"the power from the Raspberry Pi's USB port, then disconnecting",
"USB port, then disconnecting and powering on without the Raspberry",
"disconnecting and powering on without the Raspberry Pi connected, then",
"on mainboard\"*; RESULT: prevents the printer from powering on -",
"the printer from powering on - everything appears dead and",
"Steps that I'm taking to hit thermal runaway: 1. Turn",
"v1.1 loaded with Klipper firmware * MicroSwiss direct-drive New configuration:",
"the absence of the Raspberry Pi, it still reaches a",
"configuration: * Ender 3 pro * BigTreeTech Octopus v1.1 loaded",
"the printer but will error on any attempt to drive",
"to the BigTreeTech Octopus v1.1 and I'm experiencing thermal runaway",
"Octopus v1.1 loaded with klipper firmware * Creality Sprite Pro",
"Ender 3 Pro. NOTE: Thermal Runaway Protection does not work",
"returning the cables to the correct polarities returns it to",
"3 pro * BigTreeTech Octopus v1.1 loaded with klipper firmware",
"tried: * **Powering on using the power from the Raspberry",
"has power, it will power the heating tube with as",
"out my MicroSwiss direct-drive extruder and hotend for a Creality",
"1. Turn on power switch for the Ender 3 Pro.",
"powering on - everything appears dead and returning the cables",
"Pi connected, then powering down and reconnecting the Raspberry Pi**",
"loaded with klipper firmware * Creality Sprite Pro Steps that",
"the Raspberry Pi** - this confirms for me that in",
"Previous (working) configuration: * Ender 3 pro * BigTreeTech Octopus",
"Each time I've had to cut the power manually. Additional",
"the instruction manual, *\"If 3D printer restarts during hotend heating",
"loaded with Klipper firmware * MicroSwiss direct-drive New configuration: *",
"thermal runaway to the best that it can, plateauing around",
"on my Ender 3 with an upgraded mother board to",
"RESULT: thermal runaway to the best that it can, plateauing",
"instruction manual, *\"If 3D printer restarts during hotend heating up,",
"I'm experiencing thermal runaway on power-on. Previous (working) configuration: *",
"mother board to the BigTreeTech Octopus v1.1 and I'm experiencing",
"the heating tube keeps running away. Each time I've had",
"using the power from the Raspberry Pi's USB port** -",
"this is the recommendation in the instruction manual, *\"If 3D",
"of 100 °C in 30 seconds, meaning if the printer",
"on - everything appears dead and returning the cables to",
"dead and returning the cables to the correct polarities returns",
"BigTreeTech Octopus v1.1 and I'm experiencing thermal runaway on power-on.",
"the recommendation in the instruction manual, *\"If 3D printer restarts",
"3D printer restarts during hotend heating up, please reverse the",
"* Creality Sprite Pro Steps that I'm taking to hit",
"not work here. The TRP detects and triggers, but Klipper",
"60 °C. * **Powering on using the power from the",
"New configuration: * Ender 3 pro * BigTreeTech Octopus v1.1",
"connectors on mainboard\"*; RESULT: prevents the printer from powering on",
"and reconnecting the Raspberry Pi** - this confirms for me",
"Ender 3 pro * BigTreeTech Octopus v1.1 loaded with klipper",
"runaway: 1. Turn on power switch for the Ender 3",
"heating up, please reverse the heating tube connectors on mainboard\"*;",
"reaches a runaway state; RESULT: monitoring before and after powering",
"any ability to control the heating tube. Instead, Klipper shuts",
"hotend for a Creality Sprite Pro on my Ender 3",
"**Powering on using the power from the Raspberry Pi's USB",
"that in the absence of the Raspberry Pi, it still",
"shuts down and the heating tube keeps running away. Each",
"thermal runaway on power-on. Previous (working) configuration: * Ender 3",
"it still reaches a runaway state; RESULT: monitoring before and",
"printer from powering on - everything appears dead and returning",
"triggers, but Klipper doesn't seem to have any ability to",
"power from the Raspberry Pi's USB port** - this powers",
"just swapped out my MicroSwiss direct-drive extruder and hotend for",
"reverse the heating tube connectors on mainboard\"*; RESULT: prevents the",
"on the printer but will error on any attempt to",
"* **Reversing the + and - wires** - this is",
"my MicroSwiss direct-drive extruder and hotend for a Creality Sprite",
"heating tube. Instead, Klipper shuts down and the heating tube",
"hotend heating up, please reverse the heating tube connectors on",
"wires** - this is the recommendation in the instruction manual,",
"the Raspberry Pi, it still reaches a runaway state; RESULT:",
"without the Raspberry Pi connected, then powering down and reconnecting",
"Additional things that I've tried: * **Powering on using the",
"* MicroSwiss direct-drive New configuration: * Ender 3 pro *",
"will error on any attempt to drive motors or run",
"heating tube keeps running away. Each time I've had to",
"runaway state; RESULT: monitoring before and after powering manually showed",
"heating tube with as much as it can. * **Reversing",
"from powering on - everything appears dead and returning the",
"and returning the cables to the correct polarities returns it",
"to control the heating tube. Instead, Klipper shuts down and",
"down and reconnecting the Raspberry Pi** - this confirms for",
"v1.1 loaded with klipper firmware * Creality Sprite Pro Steps",
"best that it can, plateauing around 60 °C. * **Powering",
"here. The TRP detects and triggers, but Klipper doesn't seem",
"runaway on power-on. Previous (working) configuration: * Ender 3 pro",
"I just swapped out my MicroSwiss direct-drive extruder and hotend",
"doesn't seem to have any ability to control the heating",
"- this is the recommendation in the instruction manual, *\"If",
"board to the BigTreeTech Octopus v1.1 and I'm experiencing thermal",
"power, it will power the heating tube with as much",
"up, please reverse the heating tube connectors on mainboard\"*; RESULT:",
"tube keeps running away. Each time I've had to cut",
"30 seconds, meaning if the printer has power, it will",
"seem to have any ability to control the heating tube.",
"on without the Raspberry Pi connected, then powering down and",
"running away. Each time I've had to cut the power",
"from the Raspberry Pi's USB port** - this powers on",
"Pi** - this confirms for me that in the absence",
"- wires** - this is the recommendation in the instruction",
"in the absence of the Raspberry Pi, it still reaches",
"Pro. NOTE: Thermal Runaway Protection does not work here. The",
"much as it can. * **Reversing the + and -",
"plateauing around 60 °C. * **Powering on using the power",
"if the printer has power, it will power the heating",
"as it can. * **Reversing the + and - wires**",
"with an upgraded mother board to the BigTreeTech Octopus v1.1",
"Raspberry Pi, it still reaches a runaway state; RESULT: monitoring",
"BigTreeTech Octopus v1.1 loaded with klipper firmware * Creality Sprite",
"I'm taking to hit thermal runaway: 1. Turn on power",
"tube. Instead, Klipper shuts down and the heating tube keeps",
"during hotend heating up, please reverse the heating tube connectors",
"but Klipper doesn't seem to have any ability to control",
"drive motors or run the extruder. RESULT: thermal runaway to",
"to have any ability to control the heating tube. Instead,",
"Runaway Protection does not work here. The TRP detects and",
"v1.1 and I'm experiencing thermal runaway on power-on. Previous (working)",
"printer but will error on any attempt to drive motors",
"swapped out my MicroSwiss direct-drive extruder and hotend for a",
"things that I've tried: * **Powering on using the power",
"can, plateauing around 60 °C. * **Powering on using the",
"manual, *\"If 3D printer restarts during hotend heating up, please",
"the BigTreeTech Octopus v1.1 and I'm experiencing thermal runaway on",
"cables to the correct polarities returns it to a runaway",
"pro * BigTreeTech Octopus v1.1 loaded with Klipper firmware *",
"in the instruction manual, *\"If 3D printer restarts during hotend",
"as much as it can. * **Reversing the + and",
"the heating tube with as much as it can. *",
"**Reversing the + and - wires** - this is the",
"Sprite Pro on my Ender 3 with an upgraded mother",
"klipper firmware * Creality Sprite Pro Steps that I'm taking",
"powers on the printer but will error on any attempt",
"reconnecting the Raspberry Pi** - this confirms for me that",
"jump of 100 °C in 30 seconds, meaning if the",
"+ and - wires** - this is the recommendation in",
"mainboard\"*; RESULT: prevents the printer from powering on - everything",
"and powering on without the Raspberry Pi connected, then powering",
"switch for the Ender 3 Pro. NOTE: Thermal Runaway Protection",
"Raspberry Pi** - this confirms for me that in the",
"- everything appears dead and returning the cables to the",
"and - wires** - this is the recommendation in the",
"and after powering manually showed a jump of 100 °C",
"work here. The TRP detects and triggers, but Klipper doesn't",
"direct-drive New configuration: * Ender 3 pro * BigTreeTech Octopus",
"that it can, plateauing around 60 °C. * **Powering on",
"can. * **Reversing the + and - wires** - this",
"Pi's USB port, then disconnecting and powering on without the",
"on using the power from the Raspberry Pi's USB port,",
"run the extruder. RESULT: thermal runaway to the best that",
"Raspberry Pi's USB port, then disconnecting and powering on without",
"tube with as much as it can. * **Reversing the"
] |
[
"prints in a weird way. While printing, it just pauses",
"Cura settings are anything but default. I mess around with",
"but default. I mess around with a lot of different",
"rather keep most of my settings. Here is a picture",
"could reset the profile to default, but I'd rather keep",
"prints. I could reset the profile to default, but I'd",
"lot of different options to try to optimize my prints.",
"S1 is now messing up my prints in a weird",
"is now messing up my prints in a weird way.",
"corner on all the layers of the print for a",
"I'd rather keep most of my settings. Here is a",
"building up there. **What setting(s), if any could be causing",
"blobs of material building up there. **What setting(s), if any",
"I mess around with a lot of different options to",
"a note, my Cura settings are anything but default. I",
"a corner on all the layers of the print for",
"to try to optimize my prints. I could reset the",
"3 S1 is now messing up my prints in a",
"so, leading to large blobs of material building up there.",
"large blobs of material building up there. **What setting(s), if",
"default. I mess around with a lot of different options",
"profile to default, but I'd rather keep most of my",
"After fiddling with the settings on my Cura profile, my",
"weird way. While printing, it just pauses at a corner",
"on my Cura profile, my Ender 3 S1 is now",
"a lot of different options to try to optimize my",
"to large blobs of material building up there. **What setting(s),",
"the layers of the print for a second or so,",
"As a note, my Cura settings are anything but default.",
"layers of the print for a second or so, leading",
"While printing, it just pauses at a corner on all",
"pauses at a corner on all the layers of the",
"of the print for a second or so, leading to",
"mess around with a lot of different options to try",
"Ender 3 S1 is now messing up my prints in",
"try to optimize my prints. I could reset the profile",
"causing this?** As a note, my Cura settings are anything",
"optimize my prints. I could reset the profile to default,",
"note, my Cura settings are anything but default. I mess",
"my prints in a weird way. While printing, it just",
"reset the profile to default, but I'd rather keep most",
"anything but default. I mess around with a lot of",
"of my settings. Here is a picture of the issue:",
"a second or so, leading to large blobs of material",
"Cura profile, my Ender 3 S1 is now messing up",
"different options to try to optimize my prints. I could",
"my settings. Here is a picture of the issue: [](https://i.stack.imgur.com/cJude.jpg)",
"second or so, leading to large blobs of material building",
"a weird way. While printing, it just pauses at a",
"the profile to default, but I'd rather keep most of",
"there. **What setting(s), if any could be causing this?** As",
"my Cura settings are anything but default. I mess around",
"just pauses at a corner on all the layers of",
"in a weird way. While printing, it just pauses at",
"**What setting(s), if any could be causing this?** As a",
"with the settings on my Cura profile, my Ender 3",
"my Ender 3 S1 is now messing up my prints",
"or so, leading to large blobs of material building up",
"printing, it just pauses at a corner on all the",
"setting(s), if any could be causing this?** As a note,",
"around with a lot of different options to try to",
"settings on my Cura profile, my Ender 3 S1 is",
"my Cura profile, my Ender 3 S1 is now messing",
"material building up there. **What setting(s), if any could be",
"default, but I'd rather keep most of my settings. Here",
"all the layers of the print for a second or",
"profile, my Ender 3 S1 is now messing up my",
"I could reset the profile to default, but I'd rather",
"messing up my prints in a weird way. While printing,",
"print for a second or so, leading to large blobs",
"this?** As a note, my Cura settings are anything but",
"fiddling with the settings on my Cura profile, my Ender",
"of different options to try to optimize my prints. I",
"on all the layers of the print for a second",
"to optimize my prints. I could reset the profile to",
"if any could be causing this?** As a note, my",
"any could be causing this?** As a note, my Cura",
"but I'd rather keep most of my settings. Here is",
"are anything but default. I mess around with a lot",
"it just pauses at a corner on all the layers",
"for a second or so, leading to large blobs of",
"keep most of my settings. Here is a picture of",
"could be causing this?** As a note, my Cura settings",
"of material building up there. **What setting(s), if any could",
"to default, but I'd rather keep most of my settings.",
"way. While printing, it just pauses at a corner on",
"most of my settings. Here is a picture of the",
"be causing this?** As a note, my Cura settings are",
"up there. **What setting(s), if any could be causing this?**",
"up my prints in a weird way. While printing, it",
"settings are anything but default. I mess around with a",
"with a lot of different options to try to optimize",
"options to try to optimize my prints. I could reset",
"the settings on my Cura profile, my Ender 3 S1",
"leading to large blobs of material building up there. **What",
"now messing up my prints in a weird way. While",
"the print for a second or so, leading to large",
"my prints. I could reset the profile to default, but",
"at a corner on all the layers of the print"
] |