ngram
listlengths 0
9.89k
|
|---|
[
"current through that molex connector. -- I'm curious to know",
"able to easily disconnect it is important (it's hard to",
"near the base; for the motors, endstops, thermistors, etc, I",
"that's working great. For my Extruder (12v), and my heat",
"but it gets a bit hot, and my print bed",
"wiring gets hot at any other point, and none of",
"my Reprap-like 3D printer, I routed all the wires to",
"connectors get hot. -- The only thing that gets hot",
"task. Can you recommend something that's worked well for you,",
"being able to easily disconnect it is important (it's hard",
"I routed all the wires to a spot near the",
"have trouble with before. -- None of the wiring gets",
"connectors might be better suited to this task. Can you",
"hard drives and such, and it's working, but it gets",
"used to use for old hard drives and such, and",
"connector to disconnect there, and so that I don't end",
"my Extruder (12v), and my heat bed (16v), I'm using",
"such, and it's working, but it gets a bit hot,",
"curious to know what other connectors might be better suited",
"heat is caused by passing too much current through that",
"don't end up mixing them up. -- also, being able",
"trouble reaching temperatures that it didn't have trouble with before.",
"3D printer, I routed all the wires to a spot",
"molex connector. I believe the heat is caused by passing",
"and so that I don't end up mixing them up.",
"-- None of the wiring gets hot at any other",
"so that I don't end up mixing them up. --",
"triple up this connector if it can be avoided, so",
"spin it around or turn it over, etc., that's why",
"gets a bit hot, and my print bed is having",
"wires to a spot near the base; for the motors,",
"and it's working, but it gets a bit hot, and",
"None of the wiring gets hot at any other point,",
"spot near the base; for the motors, endstops, thermistors, etc,",
"none of the other connectors get hot. -- The only",
"the heat is caused by passing too much current through",
"know what other connectors might be better suited to this",
"gets hot at any other point, and none of the",
"other connectors get hot. -- The only thing that gets",
"that's worked well for you, or others? I prefer not",
"bed is having trouble reaching temperatures that it didn't have",
"turn it over, etc., that's why I'm using connectors for",
"is caused by passing too much current through that molex",
"motors, endstops, thermistors, etc, I plugged them all into a",
"all into a [DB25 breakout board](http://rads.stackoverflow.com/amzn/click/B00V7S79BW), and that's working great.",
"is important (it's hard to work on the reprap if",
"point, and none of the other connectors get hot. --",
"4-pin molex connector -- like we used to use for",
"and none of the other connectors get hot. -- The",
"end up mixing them up. -- also, being able to",
"one molex connector. I believe the heat is caused by",
"-- The only thing that gets hot is this one",
"connector. I believe the heat is caused by passing too",
"up. -- also, being able to easily disconnect it is",
"Reprap-like 3D printer, I routed all the wires to a",
"it gets a bit hot, and my print bed is",
"temperatures that it didn't have trouble with before. -- None",
"hot, and my print bed is having trouble reaching temperatures",
"others? I prefer not to double or triple up this",
"what other connectors might be better suited to this task.",
"can be avoided, so that I can just have one",
"be avoided, so that I can just have one physical",
"thermistors, etc, I plugged them all into a [DB25 breakout",
"disconnect there, and so that I don't end up mixing",
"double or triple up this connector if it can be",
"and my print bed is having trouble reaching temperatures that",
"if I can't spin it around or turn it over,",
"Extruder (12v), and my heat bed (16v), I'm using a",
"with before. -- None of the wiring gets hot at",
"also, being able to easily disconnect it is important (it's",
"can't spin it around or turn it over, etc., that's",
"to double or triple up this connector if it can",
"to know what other connectors might be better suited to",
"connector -- like we used to use for old hard",
"into a [DB25 breakout board](http://rads.stackoverflow.com/amzn/click/B00V7S79BW), and that's working great. For",
"if it can be avoided, so that I can just",
"(16v), I'm using a 4-pin molex connector -- like we",
"of the wiring gets hot at any other point, and",
"might be better suited to this task. Can you recommend",
"well for you, or others? I prefer not to double",
"to use for old hard drives and such, and it's",
"through that molex connector. -- I'm curious to know what",
"too much current through that molex connector. -- I'm curious",
"hot. -- The only thing that gets hot is this",
"-- also, being able to easily disconnect it is important",
"bit hot, and my print bed is having trouble reaching",
"other point, and none of the other connectors get hot.",
"the base; for the motors, endstops, thermistors, etc, I plugged",
"and such, and it's working, but it gets a bit",
"having trouble reaching temperatures that it didn't have trouble with",
"The only thing that gets hot is this one molex",
"only thing that gets hot is this one molex connector.",
"believe the heat is caused by passing too much current",
"caused by passing too much current through that molex connector.",
"all the wires to a spot near the base; for",
"molex connector. -- I'm curious to know what other connectors",
"for you, or others? I prefer not to double or",
"it can be avoided, so that I can just have",
"I'm using a 4-pin molex connector -- like we used",
"that I don't end up mixing them up. -- also,",
"my print bed is having trouble reaching temperatures that it",
"endstops, thermistors, etc, I plugged them all into a [DB25",
"trouble with before. -- None of the wiring gets hot",
"for the motors, endstops, thermistors, etc, I plugged them all",
"I don't end up mixing them up. -- also, being",
"the other connectors get hot. -- The only thing that",
"I believe the heat is caused by passing too much",
"we used to use for old hard drives and such,",
"easily disconnect it is important (it's hard to work on",
"molex connector -- like we used to use for old",
"hard to work on the reprap if I can't spin",
"connector if it can be avoided, so that I can",
"get hot. -- The only thing that gets hot is",
"didn't have trouble with before. -- None of the wiring",
"it didn't have trouble with before. -- None of the",
"a spot near the base; for the motors, endstops, thermistors,",
"base; for the motors, endstops, thermistors, etc, I plugged them",
"worked well for you, or others? I prefer not to",
"up this connector if it can be avoided, so that",
"around or turn it over, etc., that's why I'm using",
"it over, etc., that's why I'm using connectors for everything).",
"much current through that molex connector. -- I'm curious to",
"drives and such, and it's working, but it gets a",
"for old hard drives and such, and it's working, but",
"-- like we used to use for old hard drives",
"important (it's hard to work on the reprap if I",
"Can you recommend something that's worked well for you, or",
"to disconnect there, and so that I don't end up",
"[DB25 breakout board](http://rads.stackoverflow.com/amzn/click/B00V7S79BW), and that's working great. For my Extruder",
"avoided, so that I can just have one physical connector",
"that molex connector. -- I'm curious to know what other",
"plugged them all into a [DB25 breakout board](http://rads.stackoverflow.com/amzn/click/B00V7S79BW), and that's",
"this task. Can you recommend something that's worked well for",
"to this task. Can you recommend something that's worked well",
"I prefer not to double or triple up this connector",
"physical connector to disconnect there, and so that I don't",
"any other point, and none of the other connectors get",
"work on the reprap if I can't spin it around",
"one physical connector to disconnect there, and so that I",
"be better suited to this task. Can you recommend something",
"heat bed (16v), I'm using a 4-pin molex connector --",
"can just have one physical connector to disconnect there, and",
"there, and so that I don't end up mixing them",
"working great. For my Extruder (12v), and my heat bed",
"them all into a [DB25 breakout board](http://rads.stackoverflow.com/amzn/click/B00V7S79BW), and that's working",
"passing too much current through that molex connector. -- I'm",
"or turn it over, etc., that's why I'm using connectors",
"bed (16v), I'm using a 4-pin molex connector -- like",
"better suited to this task. Can you recommend something that's",
"them up. -- also, being able to easily disconnect it",
"the wires to a spot near the base; for the",
"or triple up this connector if it can be avoided,",
"reprap if I can't spin it around or turn it",
"etc, I plugged them all into a [DB25 breakout board](http://rads.stackoverflow.com/amzn/click/B00V7S79BW),",
"you recommend something that's worked well for you, or others?",
"hot is this one molex connector. I believe the heat",
"like we used to use for old hard drives and",
"to easily disconnect it is important (it's hard to work",
"it's working, but it gets a bit hot, and my",
"up mixing them up. -- also, being able to easily",
"hot at any other point, and none of the other",
"that I can just have one physical connector to disconnect",
"other connectors might be better suited to this task. Can",
"I can just have one physical connector to disconnect there,",
"and my heat bed (16v), I'm using a 4-pin molex",
"is having trouble reaching temperatures that it didn't have trouble",
"great. For my Extruder (12v), and my heat bed (16v),",
"-- I'm curious to know what other connectors might be",
"old hard drives and such, and it's working, but it",
"and that's working great. For my Extruder (12v), and my",
"a 4-pin molex connector -- like we used to use",
"the motors, endstops, thermistors, etc, I plugged them all into",
"before. -- None of the wiring gets hot at any",
"a bit hot, and my print bed is having trouble",
"that gets hot is this one molex connector. I believe",
"routed all the wires to a spot near the base;",
"disconnect it is important (it's hard to work on the",
"working, but it gets a bit hot, and my print",
"(12v), and my heat bed (16v), I'm using a 4-pin",
"to a spot near the base; for the motors, endstops,",
"gets hot is this one molex connector. I believe the",
"the reprap if I can't spin it around or turn",
"so that I can just have one physical connector to",
"to work on the reprap if I can't spin it",
"printer, I routed all the wires to a spot near",
"is this one molex connector. I believe the heat is",
"suited to this task. Can you recommend something that's worked",
"breakout board](http://rads.stackoverflow.com/amzn/click/B00V7S79BW), and that's working great. For my Extruder (12v),",
"something that's worked well for you, or others? I prefer",
"you, or others? I prefer not to double or triple",
"recommend something that's worked well for you, or others? I",
"(it's hard to work on the reprap if I can't",
"my heat bed (16v), I'm using a 4-pin molex connector",
"or others? I prefer not to double or triple up",
"on the reprap if I can't spin it around or",
"I can't spin it around or turn it over, etc.,",
"For my Extruder (12v), and my heat bed (16v), I'm",
"I plugged them all into a [DB25 breakout board](http://rads.stackoverflow.com/amzn/click/B00V7S79BW), and",
"this one molex connector. I believe the heat is caused",
"use for old hard drives and such, and it's working,",
"board](http://rads.stackoverflow.com/amzn/click/B00V7S79BW), and that's working great. For my Extruder (12v), and",
"at any other point, and none of the other connectors",
"print bed is having trouble reaching temperatures that it didn't",
"it is important (it's hard to work on the reprap",
"not to double or triple up this connector if it",
"connector. -- I'm curious to know what other connectors might",
"a [DB25 breakout board](http://rads.stackoverflow.com/amzn/click/B00V7S79BW), and that's working great. For my",
"by passing too much current through that molex connector. --",
"it around or turn it over, etc., that's why I'm",
"have one physical connector to disconnect there, and so that",
"I'm curious to know what other connectors might be better",
"this connector if it can be avoided, so that I",
"of the other connectors get hot. -- The only thing",
"just have one physical connector to disconnect there, and so",
"On my Reprap-like 3D printer, I routed all the wires",
"reaching temperatures that it didn't have trouble with before. --",
"the wiring gets hot at any other point, and none",
"thing that gets hot is this one molex connector. I",
"using a 4-pin molex connector -- like we used to",
"mixing them up. -- also, being able to easily disconnect",
"prefer not to double or triple up this connector if",
"that it didn't have trouble with before. -- None of"
] |
[
"just sucks it in from the spool, but occasionally it",
"a PVC pipe mounted directly above the printer, and the",
"above the printer, and the printer just sucks it in",
"the spool, but occasionally it becomes knotted at the spool,",
"from happening again? -- What's a good strategy for managing",
"the travel of my X carriage back and forth could",
"filament snags real good, it can mess up a great",
"I've ignored for awhile, but it keeps cropping up, and",
"the Z axis of the printer), so that the travel",
"tangled. -- It looks like many people have their spools",
"filament spools hanging on a PVC pipe mounted directly above",
"occasionally, if the filament snags real good, it can mess",
"printer, and the printer just sucks it in from the",
"back and forth could be why my spools keep getting",
"completely unwrapped and rewrapped all of my spools so there",
"and occasionally, if the filament snags real good, it can",
"otherwise tangled. I'm thinking even if I completely unwrapped and",
"a good idea. Here's my current setup for reference (filament",
"great print half way through, etc. Basically I have my",
"it from happening again? -- What's a good strategy for",
"sucks it in from the spool, but occasionally it becomes",
"like many people have their spools at about 90 degrees",
"have that affect. -- Also guides, etc are probably a",
"something I've ignored for awhile, but it keeps cropping up,",
"guides, etc are probably a good idea. Here's my current",
"(rotated relative to the Z axis of the printer), so",
"it keeps cropping up, and occasionally, if the filament snags",
"pipe mounted directly above the printer, and the printer just",
"all of my spools so there was no trace of",
"so that the travel of the X carriage won't have",
"it becomes knotted at the spool, or becomes otherwise tangled.",
"spools keep getting tangled. -- It looks like many people",
"a tangle, what's to stop it from happening again? --",
"people have their spools at about 90 degrees from mine",
"This is something I've ignored for awhile, but it keeps",
"my current setup for reference (filament removed): [](https://i.stack.imgur.com/lsCOe.jpg)",
"from mine (rotated relative to the Z axis of the",
"in from the spool, but occasionally it becomes knotted at",
"occasionally it becomes knotted at the spool, or becomes otherwise",
"knotted at the spool, or becomes otherwise tangled. I'm thinking",
"becomes knotted at the spool, or becomes otherwise tangled. I'm",
"X carriage won't have that affect. -- Also guides, etc",
"for awhile, but it keeps cropping up, and occasionally, if",
"be why my spools keep getting tangled. -- It looks",
"spools hanging on a PVC pipe mounted directly above the",
"good strategy for managing this kind of issue? **Edit:** From",
"my spools so there was no trace of a tangle,",
"carriage won't have that affect. -- Also guides, etc are",
"of my spools so there was no trace of a",
"strategy for managing this kind of issue? **Edit:** From some",
"is something I've ignored for awhile, but it keeps cropping",
"spool, but occasionally it becomes knotted at the spool, or",
"looks like many people have their spools at about 90",
"if the filament snags real good, it can mess up",
"hanging on a PVC pipe mounted directly above the printer,",
"if I completely unwrapped and rewrapped all of my spools",
"PVC pipe mounted directly above the printer, and the printer",
"keep getting tangled. -- It looks like many people have",
"Z axis of the printer), so that the travel of",
"why my spools keep getting tangled. -- It looks like",
"mess up a great print half way through, etc. Basically",
"on a PVC pipe mounted directly above the printer, and",
"even if I completely unwrapped and rewrapped all of my",
"there was no trace of a tangle, what's to stop",
"some of the answers below, it seems that maybe the",
"of the printer), so that the travel of the X",
"awhile, but it keeps cropping up, and occasionally, if the",
"90 degrees from mine (rotated relative to the Z axis",
"spool, or becomes otherwise tangled. I'm thinking even if I",
"a good strategy for managing this kind of issue? **Edit:**",
"good idea. Here's my current setup for reference (filament removed):",
"and rewrapped all of my spools so there was no",
"tangle, what's to stop it from happening again? -- What's",
"-- Also guides, etc are probably a good idea. Here's",
"stop it from happening again? -- What's a good strategy",
"their spools at about 90 degrees from mine (rotated relative",
"my X carriage back and forth could be why my",
"travel of the X carriage won't have that affect. --",
"affect. -- Also guides, etc are probably a good idea.",
"the printer, and the printer just sucks it in from",
"my spools keep getting tangled. -- It looks like many",
"from the spool, but occasionally it becomes knotted at the",
"Also guides, etc are probably a good idea. Here's my",
"Here's my current setup for reference (filament removed): [![enter image",
"about 90 degrees from mine (rotated relative to the Z",
"again? -- What's a good strategy for managing this kind",
"kind of issue? **Edit:** From some of the answers below,",
"the filament snags real good, it can mess up a",
"etc. Basically I have my filament spools hanging on a",
"seems that maybe the travel of my X carriage back",
"and forth could be why my spools keep getting tangled.",
"forth could be why my spools keep getting tangled. --",
"won't have that affect. -- Also guides, etc are probably",
"Basically I have my filament spools hanging on a PVC",
"happening again? -- What's a good strategy for managing this",
"that the travel of the X carriage won't have that",
"spools so there was no trace of a tangle, what's",
"so there was no trace of a tangle, what's to",
"up, and occasionally, if the filament snags real good, it",
"it in from the spool, but occasionally it becomes knotted",
"rewrapped all of my spools so there was no trace",
"the answers below, it seems that maybe the travel of",
"cropping up, and occasionally, if the filament snags real good,",
"tangled. I'm thinking even if I completely unwrapped and rewrapped",
"but it keeps cropping up, and occasionally, if the filament",
"that maybe the travel of my X carriage back and",
"and the printer just sucks it in from the spool,",
"From some of the answers below, it seems that maybe",
"what's to stop it from happening again? -- What's a",
"could be why my spools keep getting tangled. -- It",
"mounted directly above the printer, and the printer just sucks",
"printer just sucks it in from the spool, but occasionally",
"no trace of a tangle, what's to stop it from",
"trace of a tangle, what's to stop it from happening",
"spools at about 90 degrees from mine (rotated relative to",
"idea. Here's my current setup for reference (filament removed): [![enter",
"to the Z axis of the printer), so that the",
"the X carriage won't have that affect. -- Also guides,",
"keeps cropping up, and occasionally, if the filament snags real",
"for managing this kind of issue? **Edit:** From some of"
] |
[
"filaments for use in FDM printing, are known to be",
"0-14 * oxidizing agents (ozone, permanganates, dichromates, acidic hydrogen peroxide)",
"agents (ozone, permanganates, dichromates, acidic hydrogen peroxide) * organic solvents",
"stability (not necessarily simultaneously) in the presence of the following",
"formamide) * temperature up to 160 degrees Celsius * pressures",
"of the following should be assumed: * pH 0-14 *",
"up to 160 degrees Celsius * pressures between ~10^-7 torr",
"pH 0-14 * oxidizing agents (ozone, permanganates, dichromates, acidic hydrogen",
"Celsius * pressures between ~10^-7 torr and ~2 bar *",
"simultaneously) in the presence of the following should be assumed:",
"use in FDM printing, are known to be the most",
"materials, available as filaments for use in FDM printing, are",
"most physically and chemically inert? In particular, stability (not necessarily",
"* organic solvents (particularly acetone, methanol, toluene, formamide) * temperature",
"dichromates, acidic hydrogen peroxide) * organic solvents (particularly acetone, methanol,",
"physically and chemically inert? In particular, stability (not necessarily simultaneously)",
"to 160 degrees Celsius * pressures between ~10^-7 torr and",
"in FDM printing, are known to be the most physically",
"FDM printing, are known to be the most physically and",
"and chemically inert? In particular, stability (not necessarily simultaneously) in",
"* oxidizing agents (ozone, permanganates, dichromates, acidic hydrogen peroxide) *",
"the following should be assumed: * pH 0-14 * oxidizing",
"acidic hydrogen peroxide) * organic solvents (particularly acetone, methanol, toluene,",
"temperature up to 160 degrees Celsius * pressures between ~10^-7",
"are known to be the most physically and chemically inert?",
"peroxide) * organic solvents (particularly acetone, methanol, toluene, formamide) *",
"printing, are known to be the most physically and chemically",
"to be the most physically and chemically inert? In particular,",
"solvents (particularly acetone, methanol, toluene, formamide) * temperature up to",
"be the most physically and chemically inert? In particular, stability",
"~10^-7 torr and ~2 bar * oxygen or argon plasma",
"as filaments for use in FDM printing, are known to",
"for use in FDM printing, are known to be the",
"inert? In particular, stability (not necessarily simultaneously) in the presence",
"should be assumed: * pH 0-14 * oxidizing agents (ozone,",
"be assumed: * pH 0-14 * oxidizing agents (ozone, permanganates,",
"methanol, toluene, formamide) * temperature up to 160 degrees Celsius",
"pressures between ~10^-7 torr and ~2 bar * oxygen or",
"degrees Celsius * pressures between ~10^-7 torr and ~2 bar",
"permanganates, dichromates, acidic hydrogen peroxide) * organic solvents (particularly acetone,",
"necessarily simultaneously) in the presence of the following should be",
"known to be the most physically and chemically inert? In",
"the most physically and chemically inert? In particular, stability (not",
"* pH 0-14 * oxidizing agents (ozone, permanganates, dichromates, acidic",
"(ozone, permanganates, dichromates, acidic hydrogen peroxide) * organic solvents (particularly",
"160 degrees Celsius * pressures between ~10^-7 torr and ~2",
"the presence of the following should be assumed: * pH",
"(particularly acetone, methanol, toluene, formamide) * temperature up to 160",
"In particular, stability (not necessarily simultaneously) in the presence of",
"particular, stability (not necessarily simultaneously) in the presence of the",
"oxidizing agents (ozone, permanganates, dichromates, acidic hydrogen peroxide) * organic",
"(not necessarily simultaneously) in the presence of the following should",
"available as filaments for use in FDM printing, are known",
"presence of the following should be assumed: * pH 0-14",
"acetone, methanol, toluene, formamide) * temperature up to 160 degrees",
"between ~10^-7 torr and ~2 bar * oxygen or argon",
"toluene, formamide) * temperature up to 160 degrees Celsius *",
"following should be assumed: * pH 0-14 * oxidizing agents",
"assumed: * pH 0-14 * oxidizing agents (ozone, permanganates, dichromates,",
"* temperature up to 160 degrees Celsius * pressures between",
"* pressures between ~10^-7 torr and ~2 bar * oxygen",
"in the presence of the following should be assumed: *",
"hydrogen peroxide) * organic solvents (particularly acetone, methanol, toluene, formamide)",
"organic solvents (particularly acetone, methanol, toluene, formamide) * temperature up",
"What materials, available as filaments for use in FDM printing,",
"chemically inert? In particular, stability (not necessarily simultaneously) in the"
] |
[
"start another print it again perfectly prints layers 1-10. So",
"side of photo below). But the moment it starts printing",
"with a new E3D Lite6 hot end. Can add more",
"the print I can have it extrude 5cm of filament",
"filament and it's fine, no clogs...and if I immediately start",
"exactly like layers 1-3, it starts underextruding and generally looking",
"slipping. This is not the freshest PLA, so maybe it",
"nozzle got clogged or the extruder gear started slipping. This",
"layer when I tried it again. And again. And again.",
"prints beautifully (see left side of photo below). But the",
"Relevant settings are 3 bottom layers, 3 top layers, 3",
"the top layer of the bottom of the box), which",
"(bottom) layer after removing the print and turning it over:",
"when they should be almost the exact same gcode (only",
"top layers, 3 outline/perimeter shells, and 15% orthagonal infill every",
"layer](https://i.stack.imgur.com/S45eF.jpg)](https://i.stack.imgur.com/S45eF.jpg) The infill (layers 4-10) also prints beautifully (see left",
"print it again perfectly prints layers 1-10. So it doesn't",
"bottom layers, 3 top layers, 3 outline/perimeter shells, and 15%",
"soon as I cancel the print I can have it",
"fine. Here's the first (bottom) layer after removing the print",
"the exact same gcode (only a mm apart). I looked",
"infill could screw up the next layer... I just can't",
"the first (bottom) layer after removing the print and turning",
"idea of what could cause this. Update: Just tried a",
"be the extruder, the nozzle, or PLA quality. I can't",
"but layer 11 is consistently a disaster, when they should",
"PLA, so maybe it was a PLA quality problem. But",
"and generally looking like crap: [](https://i.stack.imgur.com/bPScE.jpg) The first time",
"a different roll of PLA and got the same results.",
"basically perfect, but layer 11 is consistently a disaster, when",
"tried a different roll of PLA and got the same",
"it was a PLA quality problem. But the same thing",
"immediately start another print it again perfectly prints layers 1-10.",
"more details if needed, but basically I'm just looking for",
"shells, and 15% orthagonal infill every other layer. The first",
"another print it again perfectly prints layers 1-10. So it",
"beautifully (see left side of photo below). But the moment",
"PLA quality problem. But the same thing happened at the",
"at the same layer when I tried it again. And",
"is on a DeltaMaker printer with a new E3D Lite6",
"problem. But the same thing happened at the same layer",
"any idea of what could cause this problem. I'm printing",
"Lite6 hot end. Can add more details if needed, but",
"for an idea of what could cause this. Update: Just",
"exact same gcode (only a mm apart). I looked at",
"new E3D Lite6 hot end. Can add more details if",
"photo below). But the moment it starts printing the next",
"same feedrate (G1 F2250). This is on a DeltaMaker printer",
"basically I'm just looking for an idea of what could",
"which should be solid fill exactly like layers 1-3, it",
"extruder, the nozzle, or PLA quality. I can't imagine the",
"I just can't figure out how layers 2 and 3",
"and 15% orthagonal infill every other layer. The first 3",
"I immediately start another print it again perfectly prints layers",
"have it extrude 5cm of filament and it's fine, no",
"220C) a 14cm x 14cm box, sliced with Simplify3D. Relevant",
"identical for layers 3 and 11, including same feedrate (G1",
"printer with a new E3D Lite6 hot end. Can add",
"x 14cm box, sliced with Simplify3D. Relevant settings are 3",
"it again. And again. And again. As soon as I",
"add more details if needed, but basically I'm just looking",
"generally looking like crap: [](https://i.stack.imgur.com/bPScE.jpg) The first time this",
"the extruder, the nozzle, or PLA quality. I can't imagine",
"Good](https://i.stack.imgur.com/bPScE.jpg)](https://i.stack.imgur.com/bPScE.jpg) The first time this happened, I figured the nozzle",
"I tried it again. And again. And again. As soon",
"(see left side of photo below). But the moment it",
"top layer of the bottom of the box), which should",
"should be solid fill exactly like layers 1-3, it starts",
"layer. The first 3 layers print fine. Here's the first",
"DeltaMaker printer with a new E3D Lite6 hot end. Can",
"got clogged or the extruder gear started slipping. This is",
"But the same thing happened at the same layer when",
"freshest PLA, so maybe it was a PLA quality problem.",
"layer after removing the print and turning it over: [](https://i.stack.imgur.com/bPScE.jpg) The first",
"layers 1-10. So it doesn't seem to be the extruder,",
"out how layers 2 and 3 could be basically perfect,",
"(layers 4-10) also prints beautifully (see left side of photo",
"of filament and it's fine, no clogs...and if I immediately",
"could cause this problem. I'm printing (1.75mm PLA @ 220C)",
"next layer (layer 11, the top layer of the bottom",
"to be the extruder, the nozzle, or PLA quality. I",
"quality problem. But the same thing happened at the same",
"layers of infill could screw up the next layer... I",
"Here's the first (bottom) layer after removing the print and",
"a new E3D Lite6 hot end. Can add more details",
"this. Update: Just tried a different roll of PLA and",
"I can have it extrude 5cm of filament and it's",
"needed, but basically I'm just looking for an idea of",
"layers 3 and 11, including same feedrate (G1 F2250). This",
"can't imagine the \"stress\" of laying 7 layers of infill",
"This is on a DeltaMaker printer with a new E3D",
"the extruder gear started slipping. This is not the freshest",
"I cancel the print I can have it extrude 5cm",
"of what could cause this. Update: Just tried a different",
"3 top layers, 3 outline/perimeter shells, and 15% orthagonal infill",
"14cm x 14cm box, sliced with Simplify3D. Relevant settings are",
"4-10) also prints beautifully (see left side of photo below).",
"outline/perimeter shells, and 15% orthagonal infill every other layer. The",
"consistently a disaster, when they should be almost the exact",
"the print and turning it over: [](https://i.stack.imgur.com/S45eF.jpg) The infill",
"again perfectly prints layers 1-10. So it doesn't seem to",
"Just tried a different roll of PLA and got the",
"the box), which should be solid fill exactly like layers",
"of what could cause this problem. I'm printing (1.75mm PLA",
"infill every other layer. The first 3 layers print fine.",
"settings are 3 bottom layers, 3 top layers, 3 outline/perimeter",
"looking like crap: [](https://i.stack.imgur.com/bPScE.jpg) The first time this happened,",
"of the bottom of the box), which should be solid",
"could be basically perfect, but layer 11 is consistently a",
"time this happened, I figured the nozzle got clogged or",
"I can't imagine the \"stress\" of laying 7 layers of",
"Simplify3D. Relevant settings are 3 bottom layers, 3 top layers,",
"This is not the freshest PLA, so maybe it was",
"1-3, it starts underextruding and generally looking like crap: [](https://i.stack.imgur.com/S45eF.jpg) The infill (layers 4-10)",
"gcode and it's basically identical for layers 3 and 11,",
"cause this problem. I'm printing (1.75mm PLA @ 220C) a",
"no clogs...and if I immediately start another print it again",
"also prints beautifully (see left side of photo below). But",
"box), which should be solid fill exactly like layers 1-3,",
"end. Can add more details if needed, but basically I'm",
"layer 11 is consistently a disaster, when they should be",
"feedrate (G1 F2250). This is on a DeltaMaker printer with",
"or the extruder gear started slipping. This is not the",
"And again. And again. As soon as I cancel the",
"prints layers 1-10. So it doesn't seem to be the",
"again. As soon as I cancel the print I can",
"is not the freshest PLA, so maybe it was a",
"a mm apart). I looked at the gcode and it's",
"sliced with Simplify3D. Relevant settings are 3 bottom layers, 3",
"The first 3 layers print fine. Here's the first (bottom)",
"the moment it starts printing the next layer (layer 11,",
"7 layers of infill could screw up the next layer...",
"print fine. Here's the first (bottom) layer after removing the",
"\"stress\" of laying 7 layers of infill could screw up",
"looking for any idea of what could cause this problem.",
"quality. I can't imagine the \"stress\" of laying 7 layers",
"a PLA quality problem. But the same thing happened at",
"I'm printing (1.75mm PLA @ 220C) a 14cm x 14cm",
"perfectly prints layers 1-10. So it doesn't seem to be",
"orthagonal infill every other layer. The first 3 layers print",
"3 outline/perimeter shells, and 15% orthagonal infill every other layer.",
"it doesn't seem to be the extruder, the nozzle, or",
"the next layer (layer 11, the top layer of the",
"the same layer when I tried it again. And again.",
"the nozzle, or PLA quality. I can't imagine the \"stress\"",
"details if needed, but basically I'm just looking for an",
"of infill could screw up the next layer... I just",
"it's basically identical for layers 3 and 11, including same",
"(1.75mm PLA @ 220C) a 14cm x 14cm box, sliced",
"imagine the \"stress\" of laying 7 layers of infill could",
"of the box), which should be solid fill exactly like",
"like crap: [](https://i.stack.imgur.com/bPScE.jpg) The first time this happened, I",
"first time this happened, I figured the nozzle got clogged",
"screw up the next layer... I just can't figure out",
"print I can have it extrude 5cm of filament and",
"and 11, including same feedrate (G1 F2250). This is on",
"[](https://i.stack.imgur.com/bPScE.jpg) The first time this happened, I figured the",
"over: [](https://i.stack.imgur.com/S45eF.jpg) The infill (layers 4-10) also prints beautifully",
"11, the top layer of the bottom of the box),",
"as I cancel the print I can have it extrude",
"was a PLA quality problem. But the same thing happened",
"crap: [](https://i.stack.imgur.com/bPScE.jpg) The first time this happened, I figured",
"so maybe it was a PLA quality problem. But the",
"looking for an idea of what could cause this. Update:",
"including same feedrate (G1 F2250). This is on a DeltaMaker",
"3 bottom layers, 3 top layers, 3 outline/perimeter shells, and",
"cancel the print I can have it extrude 5cm of",
"should be almost the exact same gcode (only a mm",
"next layer... I just can't figure out how layers 2",
"happened, I figured the nozzle got clogged or the extruder",
"3 layers print fine. Here's the first (bottom) layer after",
"So it doesn't seem to be the extruder, the nozzle,",
"the next layer... I just can't figure out how layers",
"first (bottom) layer after removing the print and turning it",
"apart). I looked at the gcode and it's basically identical",
"could screw up the next layer... I just can't figure",
"layer of the bottom of the box), which should be",
"idea of what could cause this problem. I'm printing (1.75mm",
"starts underextruding and generally looking like crap: [](https://i.stack.imgur.com/bPScE.jpg) The",
"almost the exact same gcode (only a mm apart). I",
"if needed, but basically I'm just looking for an idea",
"seem to be the extruder, the nozzle, or PLA quality.",
"laying 7 layers of infill could screw up the next",
"just looking for an idea of what could cause this.",
"(only a mm apart). I looked at the gcode and",
"starts printing the next layer (layer 11, the top layer",
"11, including same feedrate (G1 F2250). This is on a",
"Update: Just tried a different roll of PLA and got",
"nozzle, or PLA quality. I can't imagine the \"stress\" of",
"fine, no clogs...and if I immediately start another print it",
"box, sliced with Simplify3D. Relevant settings are 3 bottom layers,",
"hot end. Can add more details if needed, but basically",
"every other layer. The first 3 layers print fine. Here's",
"F2250). This is on a DeltaMaker printer with a new",
"and 3 could be basically perfect, but layer 11 is",
"it again perfectly prints layers 1-10. So it doesn't seem",
"a 14cm x 14cm box, sliced with Simplify3D. Relevant settings",
"print and turning it over: [](https://i.stack.imgur.com/S45eF.jpg) The infill (layers",
"not the freshest PLA, so maybe it was a PLA",
"perfect, but layer 11 is consistently a disaster, when they",
"And again. As soon as I cancel the print I",
"a DeltaMaker printer with a new E3D Lite6 hot end.",
"gcode (only a mm apart). I looked at the gcode",
"I'm looking for any idea of what could cause this",
"1-10. So it doesn't seem to be the extruder, the",
"turning it over: [](https://i.stack.imgur.com/S45eF.jpg) The infill (layers 4-10) also",
"14cm box, sliced with Simplify3D. Relevant settings are 3 bottom",
"a disaster, when they should be almost the exact same",
"the bottom of the box), which should be solid fill",
"it over: [](https://i.stack.imgur.com/S45eF.jpg) The infill (layers 4-10) also prints",
"removing the print and turning it over: [](https://i.stack.imgur.com/S45eF.jpg) The",
"could cause this. Update: Just tried a different roll of",
"clogged or the extruder gear started slipping. This is not",
"I'm just looking for an idea of what could cause",
"PLA quality. I can't imagine the \"stress\" of laying 7",
"up the next layer... I just can't figure out how",
"again. And again. As soon as I cancel the print",
"this problem. I'm printing (1.75mm PLA @ 220C) a 14cm",
"looked at the gcode and it's basically identical for layers",
"can't figure out how layers 2 and 3 could be",
"just can't figure out how layers 2 and 3 could",
"be solid fill exactly like layers 1-3, it starts underextruding",
"are 3 bottom layers, 3 top layers, 3 outline/perimeter shells,",
"15% orthagonal infill every other layer. The first 3 layers",
"Can add more details if needed, but basically I'm just",
"it's fine, no clogs...and if I immediately start another print",
"the gcode and it's basically identical for layers 3 and",
"layers, 3 top layers, 3 outline/perimeter shells, and 15% orthagonal",
"@ 220C) a 14cm x 14cm box, sliced with Simplify3D.",
"of photo below). But the moment it starts printing the",
"But the moment it starts printing the next layer (layer",
"of laying 7 layers of infill could screw up the",
"clogs...and if I immediately start another print it again perfectly",
"figured the nozzle got clogged or the extruder gear started",
"extruder gear started slipping. This is not the freshest PLA,",
"first 3 layers print fine. Here's the first (bottom) layer",
"layers 1-3, it starts underextruding and generally looking like crap:",
"moment it starts printing the next layer (layer 11, the",
"for layers 3 and 11, including same feedrate (G1 F2250).",
"same thing happened at the same layer when I tried",
"when I tried it again. And again. And again. As",
"it starts printing the next layer (layer 11, the top",
"The infill (layers 4-10) also prints beautifully (see left side",
"5cm of filament and it's fine, no clogs...and if I",
"bottom of the box), which should be solid fill exactly",
"if I immediately start another print it again perfectly prints",
"layer... I just can't figure out how layers 2 and",
"gear started slipping. This is not the freshest PLA, so",
"at the gcode and it's basically identical for layers 3",
"PLA @ 220C) a 14cm x 14cm box, sliced with",
"mm apart). I looked at the gcode and it's basically",
"basically identical for layers 3 and 11, including same feedrate",
"again. And again. And again. As soon as I cancel",
"layers print fine. Here's the first (bottom) layer after removing",
"an idea of what could cause this. Update: Just tried",
"extrude 5cm of filament and it's fine, no clogs...and if",
"it starts underextruding and generally looking like crap: [](https://i.stack.imgur.com/bPScE.jpg)",
"(layer 11, the top layer of the bottom of the",
"I figured the nozzle got clogged or the extruder gear",
"thing happened at the same layer when I tried it",
"3 could be basically perfect, but layer 11 is consistently",
"E3D Lite6 hot end. Can add more details if needed,",
"and it's fine, no clogs...and if I immediately start another",
"with Simplify3D. Relevant settings are 3 bottom layers, 3 top",
"for any idea of what could cause this problem. I'm",
"printing the next layer (layer 11, the top layer of",
"infill (layers 4-10) also prints beautifully (see left side of",
"same layer when I tried it again. And again. And",
"be almost the exact same gcode (only a mm apart).",
"it extrude 5cm of filament and it's fine, no clogs...and",
"left side of photo below). But the moment it starts",
"how layers 2 and 3 could be basically perfect, but",
"doesn't seem to be the extruder, the nozzle, or PLA",
"layers 2 and 3 could be basically perfect, but layer",
"fill exactly like layers 1-3, it starts underextruding and generally",
"I looked at the gcode and it's basically identical for",
"[](https://i.stack.imgur.com/S45eF.jpg) The infill (layers 4-10) also prints beautifully (see",
"2 and 3 could be basically perfect, but layer 11",
"like layers 1-3, it starts underextruding and generally looking like",
"maybe it was a PLA quality problem. But the same",
"after removing the print and turning it over: [](https://i.stack.imgur.com/S45eF.jpg)",
"layer (layer 11, the top layer of the bottom of",
"be basically perfect, but layer 11 is consistently a disaster,",
"the same thing happened at the same layer when I",
"solid fill exactly like layers 1-3, it starts underextruding and",
"3 and 11, including same feedrate (G1 F2250). This is",
"the \"stress\" of laying 7 layers of infill could screw",
"below). But the moment it starts printing the next layer",
"they should be almost the exact same gcode (only a",
"figure out how layers 2 and 3 could be basically",
"layers, 3 outline/perimeter shells, and 15% orthagonal infill every other",
"the nozzle got clogged or the extruder gear started slipping."
] |
[
"printer with some help. I was advised I shouldn't print",
"glass for it that will come within the next few",
"of matrix board (i.e. no cooper at all) to print",
"board (i.e. no cooper at all) to print on. Will",
"matrix board (i.e. no cooper at all) to print on.",
"mm wide. I'm struggling to find glass for it that",
"deep by 220 mm wide. I'm struggling to find glass",
"for it that will come within the next few days.",
"well? 2. If glass is better, does it have to",
"by 220 mm wide. I'm struggling to find glass for",
"If glass is better, does it have to cover the",
"days. The only custom cut was on eBay and it's",
"me a piece of matrix board (i.e. no cooper at",
"new to 3D printing. I have just put together my",
"glass is better, does it have to cover the entire",
"piece of matrix board (i.e. no cooper at all) to",
"print directly onto the aluminium plate - I assume it's",
"does it have to cover the entire bed? My bed",
"The manufacturer did give me a piece of matrix board",
"better, does it have to cover the entire bed? My",
"come within the next few days. The only custom cut",
"I'm struggling to find glass for it that will come",
"within the next few days. The only custom cut was",
"did give me a piece of matrix board (i.e. no",
"onto the aluminium plate - I assume it's aluminium. 1.",
"I shouldn't print directly onto the aluminium plate - I",
"entire bed? My bed is 275 mm deep by 220",
"all) to print on. Will this work well? 2. If",
"3D printing. I have just put together my own 3D",
"am new to 3D printing. I have just put together",
"I am new to 3D printing. I have just put",
"will come within the next few days. The only custom",
"mm deep by 220 mm wide. I'm struggling to find",
"shouldn't print directly onto the aluminium plate - I assume",
"help. I was advised I shouldn't print directly onto the",
"Will this work well? 2. If glass is better, does",
"printing. I have just put together my own 3D printer",
"that will come within the next few days. The only",
"directly onto the aluminium plate - I assume it's aluminium.",
"it have to cover the entire bed? My bed is",
"on. Will this work well? 2. If glass is better,",
"to find glass for it that will come within the",
"together my own 3D printer with some help. I was",
"275 mm deep by 220 mm wide. I'm struggling to",
"(i.e. no cooper at all) to print on. Will this",
"eBay and it's going to take over a week to",
"own 3D printer with some help. I was advised I",
"2. If glass is better, does it have to cover",
"I have just put together my own 3D printer with",
"to cover the entire bed? My bed is 275 mm",
"have to cover the entire bed? My bed is 275",
"the aluminium plate - I assume it's aluminium. 1. The",
"some help. I was advised I shouldn't print directly onto",
"The only custom cut was on eBay and it's going",
"only custom cut was on eBay and it's going to",
"few days. The only custom cut was on eBay and",
"advised I shouldn't print directly onto the aluminium plate -",
"plate - I assume it's aluminium. 1. The manufacturer did",
"was on eBay and it's going to take over a",
"this work well? 2. If glass is better, does it",
"I assume it's aluminium. 1. The manufacturer did give me",
"I was advised I shouldn't print directly onto the aluminium",
"assume it's aluminium. 1. The manufacturer did give me a",
"is 275 mm deep by 220 mm wide. I'm struggling",
"have just put together my own 3D printer with some",
"print on. Will this work well? 2. If glass is",
"next few days. The only custom cut was on eBay",
"1. The manufacturer did give me a piece of matrix",
"the entire bed? My bed is 275 mm deep by",
"no cooper at all) to print on. Will this work",
"give me a piece of matrix board (i.e. no cooper",
"at all) to print on. Will this work well? 2.",
"aluminium. 1. The manufacturer did give me a piece of",
"- I assume it's aluminium. 1. The manufacturer did give",
"my own 3D printer with some help. I was advised",
"bed is 275 mm deep by 220 mm wide. I'm",
"it that will come within the next few days. The",
"wide. I'm struggling to find glass for it that will",
"just put together my own 3D printer with some help.",
"to 3D printing. I have just put together my own",
"to print on. Will this work well? 2. If glass",
"My bed is 275 mm deep by 220 mm wide.",
"struggling to find glass for it that will come within",
"bed? My bed is 275 mm deep by 220 mm",
"cooper at all) to print on. Will this work well?",
"cover the entire bed? My bed is 275 mm deep",
"and it's going to take over a week to arrive.",
"manufacturer did give me a piece of matrix board (i.e.",
"is better, does it have to cover the entire bed?",
"220 mm wide. I'm struggling to find glass for it",
"with some help. I was advised I shouldn't print directly",
"find glass for it that will come within the next",
"cut was on eBay and it's going to take over",
"aluminium plate - I assume it's aluminium. 1. The manufacturer",
"work well? 2. If glass is better, does it have",
"a piece of matrix board (i.e. no cooper at all)",
"was advised I shouldn't print directly onto the aluminium plate",
"custom cut was on eBay and it's going to take",
"put together my own 3D printer with some help. I",
"3D printer with some help. I was advised I shouldn't",
"on eBay and it's going to take over a week",
"the next few days. The only custom cut was on",
"it's aluminium. 1. The manufacturer did give me a piece"
] |
[
"attachment. Whenever I print without a raft, the first inch",
"the rest of the print is perfect, and the bed",
"if maybe the material was cooling too quickly, but that",
"but that had zero effect on it. I'd like to",
"the bed already has a material on it to aid",
"bed, but the rest of the first layer is flawless.",
"is flawless. I have tried speeding up and slowing down",
"rest of the first layer is flawless. I have tried",
"flawless. I have tried speeding up and slowing down the",
"to aid adhesion. What else can I try to prevent",
"the first inch or two of material laid down does",
"and the bed already has a material on it to",
"to get a little worse when slower. I also tried",
"first layer walls, but the problem remains. It also seemed",
"or two of material laid down does not adhere to",
"fan attachment. Whenever I print without a raft, the first",
"already has a material on it to aid adhesion. What",
"the print is perfect, and the bed already has a",
"down does not adhere to the bed, but the rest",
"up and slowing down the first layer walls, but the",
"since the rest of the print is perfect, and the",
"I have tried speeding up and slowing down the first",
"Whenever I print without a raft, the first inch or",
"two of material laid down does not adhere to the",
"problem remains. It also seemed to get a little worse",
"of the print is perfect, and the bed already has",
"other methods since the rest of the print is perfect,",
"the first layer walls, but the problem remains. It also",
"not turning on the cooling fan for a bit to",
"has a material on it to aid adhesion. What else",
"fan for a bit to see if maybe the material",
"does not adhere to the bed, but the rest of",
"inch or two of material laid down does not adhere",
"without a raft, the first inch or two of material",
"and a cooling fan attachment. Whenever I print without a",
"get a little worse when slower. I also tried not",
"is perfect, and the bed already has a material on",
"aid adhesion. What else can I try to prevent the",
"adhesion. What else can I try to prevent the dragging",
"I have a QIDI Tech 1. It has a heated",
"to the bed, but the rest of the first layer",
"print is perfect, and the bed already has a material",
"like to avoid using tape and other methods since the",
"cooling fan attachment. Whenever I print without a raft, the",
"worse when slower. I also tried not turning on the",
"using tape and other methods since the rest of the",
"cooling fan for a bit to see if maybe the",
"I print without a raft, the first inch or two",
"turning on the cooling fan for a bit to see",
"a QIDI Tech 1. It has a heated bed, and",
"maybe the material was cooling too quickly, but that had",
"remains. It also seemed to get a little worse when",
"had zero effect on it. I'd like to avoid using",
"a material on it to aid adhesion. What else can",
"What else can I try to prevent the dragging for",
"raft, the first inch or two of material laid down",
"can I try to prevent the dragging for the start",
"also seemed to get a little worse when slower. I",
"the bed, but the rest of the first layer is",
"tried not turning on the cooling fan for a bit",
"bed already has a material on it to aid adhesion.",
"of material laid down does not adhere to the bed,",
"a raft, the first inch or two of material laid",
"layer is flawless. I have tried speeding up and slowing",
"I also tried not turning on the cooling fan for",
"the first layer is flawless. I have tried speeding up",
"try to prevent the dragging for the start of the",
"and other methods since the rest of the print is",
"on it to aid adhesion. What else can I try",
"laid down does not adhere to the bed, but the",
"bed, and a cooling fan attachment. Whenever I print without",
"speeding up and slowing down the first layer walls, but",
"1. It has a heated bed, and a cooling fan",
"a cooling fan attachment. Whenever I print without a raft,",
"QIDI Tech 1. It has a heated bed, and a",
"slowing down the first layer walls, but the problem remains.",
"the material was cooling too quickly, but that had zero",
"the rest of the first layer is flawless. I have",
"a bit to see if maybe the material was cooling",
"I try to prevent the dragging for the start of",
"on it. I'd like to avoid using tape and other",
"for a bit to see if maybe the material was",
"too quickly, but that had zero effect on it. I'd",
"but the rest of the first layer is flawless. I",
"the cooling fan for a bit to see if maybe",
"quickly, but that had zero effect on it. I'd like",
"avoid using tape and other methods since the rest of",
"cooling too quickly, but that had zero effect on it.",
"to avoid using tape and other methods since the rest",
"down the first layer walls, but the problem remains. It",
"has a heated bed, and a cooling fan attachment. Whenever",
"have tried speeding up and slowing down the first layer",
"It also seemed to get a little worse when slower.",
"Tech 1. It has a heated bed, and a cooling",
"to prevent the dragging for the start of the print?",
"tried speeding up and slowing down the first layer walls,",
"material was cooling too quickly, but that had zero effect",
"print without a raft, the first inch or two of",
"that had zero effect on it. I'd like to avoid",
"It has a heated bed, and a cooling fan attachment.",
"first inch or two of material laid down does not",
"walls, but the problem remains. It also seemed to get",
"the problem remains. It also seemed to get a little",
"heated bed, and a cooling fan attachment. Whenever I print",
"it to aid adhesion. What else can I try to",
"on the cooling fan for a bit to see if",
"not adhere to the bed, but the rest of the",
"methods since the rest of the print is perfect, and",
"first layer is flawless. I have tried speeding up and",
"have a QIDI Tech 1. It has a heated bed,",
"material on it to aid adhesion. What else can I",
"effect on it. I'd like to avoid using tape and",
"seemed to get a little worse when slower. I also",
"I'd like to avoid using tape and other methods since",
"it. I'd like to avoid using tape and other methods",
"layer walls, but the problem remains. It also seemed to",
"bit to see if maybe the material was cooling too",
"to see if maybe the material was cooling too quickly,",
"else can I try to prevent the dragging for the",
"material laid down does not adhere to the bed, but",
"and slowing down the first layer walls, but the problem",
"adhere to the bed, but the rest of the first",
"of the first layer is flawless. I have tried speeding",
"zero effect on it. I'd like to avoid using tape",
"also tried not turning on the cooling fan for a",
"but the problem remains. It also seemed to get a",
"little worse when slower. I also tried not turning on",
"see if maybe the material was cooling too quickly, but",
"a heated bed, and a cooling fan attachment. Whenever I",
"when slower. I also tried not turning on the cooling",
"tape and other methods since the rest of the print",
"slower. I also tried not turning on the cooling fan",
"rest of the print is perfect, and the bed already",
"was cooling too quickly, but that had zero effect on",
"a little worse when slower. I also tried not turning",
"perfect, and the bed already has a material on it"
] |
[
"mix them into hundreds? of colors. This can for example",
"at it, probably a 6th input would be useful: like",
"white filament to print white, so that means 5 inputs.",
"FDM printers. CMYK is mixed physically like you would mix",
"diamond hotend is actually mixed like CMYK. Repetier firmware v92.9",
"a white filament to print white, so that means 5",
"elastic filament. So why isn't there a nozzle with 5-6",
"That brings our tally to 4 inputs. It still needs",
"would give the maximum range of colors when constrained to",
"far as I know only HP Jet Fusion 3D printer",
"of a hotend, means the printing color palette lacks White",
"like CMYK. Repetier firmware v92.9 has this built in with",
"with Red, Green and Blue filament to mix a RGB",
"Repetier firmware v92.9 has this built in with support up",
"colors. This can for example be used with Red, Green",
"printers. CMYK is mixed physically like you would mix watercolors",
"can for example be used with Red, Green and Blue",
"3 inputs of a hotend, means the printing color palette",
"[diamond hotend](http://reprap.org/wiki/Diamond_Hotend#Benefits_of_this_design), which can be used to print in 3",
"HP Jet Fusion 3D printer uses this process, but it",
"to print white, so that means 5 inputs. And while",
"range of colors when constrained to 3. However true RGB",
"use separate colored [voxels](https://en.wikipedia.org/wiki/Voxel) to create the appearance of a",
"why isn't there a nozzle with 5-6 inputs already? Could",
"CMYK is mixed physically like you would mix watercolors together",
"a total n00b in this. Please correct any assumptions I",
"vastly different from normal diy 3D FDM printers. CMYK is",
"black infill (to save using CMYK to mix into black)",
"just theoretical assumptions. I just discovered 3D printing and I",
"and also it seems that CMYK would give a bigger",
"means even the 3 input diamond hotend is actually mixed",
"5-6 inputs already? Could it be done? Are there such",
"has this built in with support up to 16 inputs",
"CMYK. Repetier firmware v92.9 has this built in with support",
"that CMYK would give a bigger range of colors. That",
"diy 3D FDM printers. CMYK is mixed physically like you",
"uses this process, but it uses a process vastly different",
"v1.0.x only supports 4 inputs per nozzle at this time.",
"have to be these colors, but I believe RGB would",
"discovered 3D printing and I am in the planning phase",
"give the maximum range of colors when constrained to 3.",
"a nozzle, but Marlin firmware v1.0.x only supports 4 inputs",
"for printing on paper by **all** laserjet and inkjet printers",
"colors. As far as I know only HP Jet Fusion",
"the 3 input diamond hotend is actually mixed like CMYK.",
"in with support up to 16 inputs for a nozzle,",
"it seems that CMYK would give a bigger range of",
"colors when constrained to 3. However true RGB in physical",
"like for printing black infill (to save using CMYK to",
"them into hundreds? of colors. This can for example be",
"physically like you would mix watercolors together to make new",
"hotend called a [diamond hotend](http://reprap.org/wiki/Diamond_Hotend#Benefits_of_this_design), which can be used to",
"printing would use separate colored [voxels](https://en.wikipedia.org/wiki/Voxel) to create the appearance",
"3 colors and mix them into hundreds? of colors. This",
"my first 3D printer, so I am a total n00b",
"used with Red, Green and Blue filament to mix a",
"mixed physically like you would mix watercolors together to make",
"RGB in physical printing would use separate colored [voxels](https://en.wikipedia.org/wiki/Voxel) to",
"a process vastly different from normal diy 3D FDM printers.",
"with support up to 16 inputs for a nozzle, but",
"or for using transparent filament or elastic filament. So why",
"only HP Jet Fusion 3D printer uses this process, but",
"presses). So that means even the 3 input diamond hotend",
"the planning phase of building my first 3D printer, so",
"it uses a process vastly different from normal diy 3D",
"4 inputs per nozzle at this time. Using RGB for",
"a color, just like monitors display colors. As far as",
"is used for printing on paper by **all** laserjet and",
"filament or elastic filament. So why isn't there a nozzle",
"inputs of a hotend, means the printing color palette lacks",
"but I believe RGB would give the maximum range of",
"4 inputs. It still needs a white filament to print",
"and I am in the planning phase of building my",
"which can be used to print in 3 colors and",
"be used with Red, Green and Blue filament to mix",
"be these colors, but I believe RGB would give the",
"range of colors. That brings our tally to 4 inputs.",
"useful: like for printing black infill (to save using CMYK",
"don't have to be these colors, but I believe RGB",
"planning phase of building my first 3D printer, so I",
"Marlin firmware v1.0.x only supports 4 inputs per nozzle at",
"for using transparent filament or elastic filament. So why isn't",
"to 4 inputs. It still needs a white filament to",
"already? P.S These are just theoretical assumptions. I just discovered",
"inputs. It still needs a white filament to print white,",
"Blue filament to mix a RGB palette. They don't have",
"first 3D printer, so I am a total n00b in",
"isn't there a nozzle with 5-6 inputs already? Could it",
"3D printer, so I am a total n00b in this.",
"so that means 5 inputs. And while we are at",
"appearance of a color, just like monitors display colors. As",
"print white, so that means 5 inputs. And while we",
"display colors. As far as I know only HP Jet",
"to mix a RGB palette. They don't have to be",
"in 3 colors and mix them into hundreds? of colors.",
"new colors. It is used for printing on paper by",
"a bigger range of colors. That brings our tally to",
"save using CMYK to mix into black) or for using",
"believe RGB would give the maximum range of colors when",
"on paper by **all** laserjet and inkjet printers (and in",
"It is used for printing on paper by **all** laserjet",
"means the printing color palette lacks White and also it",
"per nozzle at this time. Using RGB for the 3",
"it, probably a 6th input would be useful: like for",
"the maximum range of colors when constrained to 3. However",
"phase of building my first 3D printer, so I am",
"Green and Blue filament to mix a RGB palette. They",
"to 16 inputs for a nozzle, but Marlin firmware v1.0.x",
"hotend, means the printing color palette lacks White and also",
"Are there such hotends already? P.S These are just theoretical",
"paper by **all** laserjet and inkjet printers (and in printing",
"theoretical assumptions. I just discovered 3D printing and I am",
"while we are at it, probably a 6th input would",
"hotend is actually mixed like CMYK. Repetier firmware v92.9 has",
"printing black infill (to save using CMYK to mix into",
"supports 4 inputs per nozzle at this time. Using RGB",
"mix watercolors together to make new colors. It is used",
"such hotends already? P.S These are just theoretical assumptions. I",
"Fusion 3D printer uses this process, but it uses a",
"As far as I know only HP Jet Fusion 3D",
"called a [diamond hotend](http://reprap.org/wiki/Diamond_Hotend#Benefits_of_this_design), which can be used to print",
"hotend](http://reprap.org/wiki/Diamond_Hotend#Benefits_of_this_design), which can be used to print in 3 colors",
"there a nozzle with 5-6 inputs already? Could it be",
"to print in 3 colors and mix them into hundreds?",
"even the 3 input diamond hotend is actually mixed like",
"am in the planning phase of building my first 3D",
"Could it be done? Are there such hotends already? P.S",
"filament to mix a RGB palette. They don't have to",
"firmware v1.0.x only supports 4 inputs per nozzle at this",
"that means even the 3 input diamond hotend is actually",
"And while we are at it, probably a 6th input",
"with 5-6 inputs already? Could it be done? Are there",
"can be used to print in 3 colors and mix",
"hundreds? of colors. This can for example be used with",
"would use separate colored [voxels](https://en.wikipedia.org/wiki/Voxel) to create the appearance of",
"but Marlin firmware v1.0.x only supports 4 inputs per nozzle",
"assumptions. I just discovered 3D printing and I am in",
"These are just theoretical assumptions. I just discovered 3D printing",
"a [diamond hotend](http://reprap.org/wiki/Diamond_Hotend#Benefits_of_this_design), which can be used to print in",
"monitors display colors. As far as I know only HP",
"physical printing would use separate colored [voxels](https://en.wikipedia.org/wiki/Voxel) to create the",
"I just discovered 3D printing and I am in the",
"built in with support up to 16 inputs for a",
"this great hotend called a [diamond hotend](http://reprap.org/wiki/Diamond_Hotend#Benefits_of_this_design), which can be",
"and inkjet printers (and in printing presses). So that means",
"at this time. Using RGB for the 3 inputs of",
"They don't have to be these colors, but I believe",
"be useful: like for printing black infill (to save using",
"3. However true RGB in physical printing would use separate",
"uses a process vastly different from normal diy 3D FDM",
"inputs already? Could it be done? Are there such hotends",
"maximum range of colors when constrained to 3. However true",
"It still needs a white filament to print white, so",
"would mix watercolors together to make new colors. It is",
"using transparent filament or elastic filament. So why isn't there",
"inputs per nozzle at this time. Using RGB for the",
"filament to print white, so that means 5 inputs. And",
"However true RGB in physical printing would use separate colored",
"separate colored [voxels](https://en.wikipedia.org/wiki/Voxel) to create the appearance of a color,",
"colors and mix them into hundreds? of colors. This can",
"in the planning phase of building my first 3D printer,",
"printing on paper by **all** laserjet and inkjet printers (and",
"used to print in 3 colors and mix them into",
"done? Are there such hotends already? P.S These are just",
"into black) or for using transparent filament or elastic filament.",
"create the appearance of a color, just like monitors display",
"there such hotends already? P.S These are just theoretical assumptions.",
"am a total n00b in this. Please correct any assumptions",
"actually mixed like CMYK. Repetier firmware v92.9 has this built",
"n00b in this. Please correct any assumptions I got wrong.",
"only supports 4 inputs per nozzle at this time. Using",
"used for printing on paper by **all** laserjet and inkjet",
"RGB for the 3 inputs of a hotend, means the",
"building my first 3D printer, so I am a total",
"be done? Are there such hotends already? P.S These are",
"just like monitors display colors. As far as I know",
"inputs. And while we are at it, probably a 6th",
"print in 3 colors and mix them into hundreds? of",
"example be used with Red, Green and Blue filament to",
"colors. It is used for printing on paper by **all**",
"it be done? Are there such hotends already? P.S These",
"the 3 inputs of a hotend, means the printing color",
"needs a white filament to print white, so that means",
"in printing presses). So that means even the 3 input",
"a RGB palette. They don't have to be these colors,",
"3 input diamond hotend is actually mixed like CMYK. Repetier",
"printers (and in printing presses). So that means even the",
"from normal diy 3D FDM printers. CMYK is mixed physically",
"bigger range of colors. That brings our tally to 4",
"hotends already? P.S These are just theoretical assumptions. I just",
"as I know only HP Jet Fusion 3D printer uses",
"time. Using RGB for the 3 inputs of a hotend,",
"So why isn't there a nozzle with 5-6 inputs already?",
"16 inputs for a nozzle, but Marlin firmware v1.0.x only",
"3D printer uses this process, but it uses a process",
"process vastly different from normal diy 3D FDM printers. CMYK",
"or elastic filament. So why isn't there a nozzle with",
"nozzle, but Marlin firmware v1.0.x only supports 4 inputs per",
"constrained to 3. However true RGB in physical printing would",
"I am a total n00b in this. Please correct any",
"is actually mixed like CMYK. Repetier firmware v92.9 has this",
"probably a 6th input would be useful: like for printing",
"color, just like monitors display colors. As far as I",
"So that means even the 3 input diamond hotend is",
"P.S These are just theoretical assumptions. I just discovered 3D",
"of a color, just like monitors display colors. As far",
"[voxels](https://en.wikipedia.org/wiki/Voxel) to create the appearance of a color, just like",
"into hundreds? of colors. This can for example be used",
"(and in printing presses). So that means even the 3",
"This can for example be used with Red, Green and",
"tally to 4 inputs. It still needs a white filament",
"colors. That brings our tally to 4 inputs. It still",
"for printing black infill (to save using CMYK to mix",
"RGB palette. They don't have to be these colors, but",
"inkjet printers (and in printing presses). So that means even",
"process, but it uses a process vastly different from normal",
"up to 16 inputs for a nozzle, but Marlin firmware",
"means 5 inputs. And while we are at it, probably",
"of colors. That brings our tally to 4 inputs. It",
"input would be useful: like for printing black infill (to",
"**all** laserjet and inkjet printers (and in printing presses). So",
"know only HP Jet Fusion 3D printer uses this process,",
"this process, but it uses a process vastly different from",
"infill (to save using CMYK to mix into black) or",
"we are at it, probably a 6th input would be",
"are at it, probably a 6th input would be useful:",
"a nozzle with 5-6 inputs already? Could it be done?",
"nozzle with 5-6 inputs already? Could it be done? Are",
"to mix into black) or for using transparent filament or",
"are just theoretical assumptions. I just discovered 3D printing and",
"like monitors display colors. As far as I know only",
"3D FDM printers. CMYK is mixed physically like you would",
"this built in with support up to 16 inputs for",
"mixed like CMYK. Repetier firmware v92.9 has this built in",
"White and also it seems that CMYK would give a",
"to 3. However true RGB in physical printing would use",
"transparent filament or elastic filament. So why isn't there a",
"total n00b in this. Please correct any assumptions I got",
"of colors when constrained to 3. However true RGB in",
"to create the appearance of a color, just like monitors",
"watercolors together to make new colors. It is used for",
"colored [voxels](https://en.wikipedia.org/wiki/Voxel) to create the appearance of a color, just",
"CMYK would give a bigger range of colors. That brings",
"be used to print in 3 colors and mix them",
"printing and I am in the planning phase of building",
"different from normal diy 3D FDM printers. CMYK is mixed",
"printing presses). So that means even the 3 input diamond",
"the appearance of a color, just like monitors display colors.",
"color palette lacks White and also it seems that CMYK",
"and Blue filament to mix a RGB palette. They don't",
"would be useful: like for printing black infill (to save",
"mix into black) or for using transparent filament or elastic",
"palette. They don't have to be these colors, but I",
"give a bigger range of colors. That brings our tally",
"just discovered 3D printing and I am in the planning",
"normal diy 3D FDM printers. CMYK is mixed physically like",
"laserjet and inkjet printers (and in printing presses). So that",
"I believe RGB would give the maximum range of colors",
"printer uses this process, but it uses a process vastly",
"using CMYK to mix into black) or for using transparent",
"inputs for a nozzle, but Marlin firmware v1.0.x only supports",
"for the 3 inputs of a hotend, means the printing",
"to be these colors, but I believe RGB would give",
"is mixed physically like you would mix watercolors together to",
"a hotend, means the printing color palette lacks White and",
"for a nozzle, but Marlin firmware v1.0.x only supports 4",
"of building my first 3D printer, so I am a",
"palette lacks White and also it seems that CMYK would",
"support up to 16 inputs for a nozzle, but Marlin",
"and mix them into hundreds? of colors. This can for",
"Using RGB for the 3 inputs of a hotend, means",
"mix a RGB palette. They don't have to be these",
"seems that CMYK would give a bigger range of colors.",
"brings our tally to 4 inputs. It still needs a",
"firmware v92.9 has this built in with support up to",
"lacks White and also it seems that CMYK would give",
"CMYK to mix into black) or for using transparent filament",
"is this great hotend called a [diamond hotend](http://reprap.org/wiki/Diamond_Hotend#Benefits_of_this_design), which can",
"you would mix watercolors together to make new colors. It",
"(to save using CMYK to mix into black) or for",
"this time. Using RGB for the 3 inputs of a",
"3D printing and I am in the planning phase of",
"a 6th input would be useful: like for printing black",
"v92.9 has this built in with support up to 16",
"the printing color palette lacks White and also it seems",
"still needs a white filament to print white, so that",
"make new colors. It is used for printing on paper",
"colors, but I believe RGB would give the maximum range",
"also it seems that CMYK would give a bigger range",
"black) or for using transparent filament or elastic filament. So",
"already? Could it be done? Are there such hotends already?",
"I know only HP Jet Fusion 3D printer uses this",
"Red, Green and Blue filament to mix a RGB palette.",
"in physical printing would use separate colored [voxels](https://en.wikipedia.org/wiki/Voxel) to create",
"6th input would be useful: like for printing black infill",
"for example be used with Red, Green and Blue filament",
"would give a bigger range of colors. That brings our",
"by **all** laserjet and inkjet printers (and in printing presses).",
"these colors, but I believe RGB would give the maximum",
"input diamond hotend is actually mixed like CMYK. Repetier firmware",
"together to make new colors. It is used for printing",
"RGB would give the maximum range of colors when constrained",
"to make new colors. It is used for printing on",
"nozzle at this time. Using RGB for the 3 inputs",
"true RGB in physical printing would use separate colored [voxels](https://en.wikipedia.org/wiki/Voxel)",
"printing color palette lacks White and also it seems that",
"but it uses a process vastly different from normal diy",
"that means 5 inputs. And while we are at it,",
"5 inputs. And while we are at it, probably a",
"filament. So why isn't there a nozzle with 5-6 inputs",
"our tally to 4 inputs. It still needs a white",
"printer, so I am a total n00b in this. Please",
"Jet Fusion 3D printer uses this process, but it uses",
"when constrained to 3. However true RGB in physical printing",
"white, so that means 5 inputs. And while we are",
"of colors. This can for example be used with Red,",
"I am in the planning phase of building my first",
"like you would mix watercolors together to make new colors.",
"great hotend called a [diamond hotend](http://reprap.org/wiki/Diamond_Hotend#Benefits_of_this_design), which can be used",
"There is this great hotend called a [diamond hotend](http://reprap.org/wiki/Diamond_Hotend#Benefits_of_this_design), which",
"so I am a total n00b in this. Please correct"
] |
[
"hot-end is at ~0 on the Z axis and I",
"will smash the glass. How can I fix it? The",
"the hot-end is at ~0 on the Z axis and",
"it begins scraping along the bed, then when moving back",
"want to add a glass plate but am worried this",
"axis and I go to level it, as it approaches",
"the bed, then when moving back to probe the center",
"probe the center of the bed (after homing X to",
"homing will smash the glass. How can I fix it?",
"can I fix it? The printer auto-levels and runs Marlin.",
"I want to add a glass plate but am worried",
"0) it will scrape the bed again. I want to",
"to add a glass plate but am worried this aggressive",
"= 0 it begins scraping along the bed, then when",
"glass plate but am worried this aggressive homing will smash",
"homing X to 0) it will scrape the bed again.",
"smash the glass. How can I fix it? The printer",
"Z axis and I go to level it, as it",
"(after homing X to 0) it will scrape the bed",
"to 0) it will scrape the bed again. I want",
"to level it, as it approaches X = 0 it",
"it approaches X = 0 it begins scraping along the",
"again. I want to add a glass plate but am",
"approaches X = 0 it begins scraping along the bed,",
"scrape the bed again. I want to add a glass",
"the glass. How can I fix it? The printer auto-levels",
"level it, as it approaches X = 0 it begins",
"back to probe the center of the bed (after homing",
"the Z axis and I go to level it, as",
"aggressive homing will smash the glass. How can I fix",
"at ~0 on the Z axis and I go to",
"on the Z axis and I go to level it,",
"as it approaches X = 0 it begins scraping along",
"X to 0) it will scrape the bed again. I",
"am worried this aggressive homing will smash the glass. How",
"How can I fix it? The printer auto-levels and runs",
"bed, then when moving back to probe the center of",
"will scrape the bed again. I want to add a",
"add a glass plate but am worried this aggressive homing",
"and I go to level it, as it approaches X",
"when moving back to probe the center of the bed",
"is at ~0 on the Z axis and I go",
"to probe the center of the bed (after homing X",
"it will scrape the bed again. I want to add",
"the bed again. I want to add a glass plate",
"I go to level it, as it approaches X =",
"along the bed, then when moving back to probe the",
"a glass plate but am worried this aggressive homing will",
"then when moving back to probe the center of the",
"moving back to probe the center of the bed (after",
"worried this aggressive homing will smash the glass. How can",
"this aggressive homing will smash the glass. How can I",
"go to level it, as it approaches X = 0",
"center of the bed (after homing X to 0) it",
"begins scraping along the bed, then when moving back to",
"but am worried this aggressive homing will smash the glass.",
"glass. How can I fix it? The printer auto-levels and",
"bed again. I want to add a glass plate but",
"the center of the bed (after homing X to 0)",
"the bed (after homing X to 0) it will scrape",
"of the bed (after homing X to 0) it will",
"0 it begins scraping along the bed, then when moving",
"it, as it approaches X = 0 it begins scraping",
"scraping along the bed, then when moving back to probe",
"bed (after homing X to 0) it will scrape the",
"plate but am worried this aggressive homing will smash the",
"X = 0 it begins scraping along the bed, then",
"~0 on the Z axis and I go to level",
"If the hot-end is at ~0 on the Z axis"
] |
[
"humidity or temperature. Note: It would be best if the",
"the simulation tools targeted automotive parts (power train, cooling system,",
"simulation tool which I can use to simulate this material",
"be best if the simulation tools targeted automotive parts (power",
"based or NiTi material) for 3D printing. Is there any",
"Shape-memory alloy (non-metal, iron based, copper based or NiTi material)",
"automotive parts (power train, cooling system, interior & exterior etc.).",
"In 4D printing technology or by means usage of Shape-memory",
"any software simulation tool which I can use to simulate",
"simulate this material change behavior with respect to time? For",
"if the simulation tools targeted automotive parts (power train, cooling",
"based, copper based or NiTi material) for 3D printing. Is",
"NiTi material) for 3D printing. Is there any software simulation",
"tool which I can use to simulate this material change",
"by means usage of Shape-memory alloy (non-metal, iron based, copper",
"It would be best if the simulation tools targeted automotive",
"material) for 3D printing. Is there any software simulation tool",
"of Shape-memory alloy (non-metal, iron based, copper based or NiTi",
"time? For example, when introducing a change in humidity or",
"when introducing a change in humidity or temperature. Note: It",
"introducing a change in humidity or temperature. Note: It would",
"printing. Is there any software simulation tool which I can",
"in humidity or temperature. Note: It would be best if",
"4D printing technology or by means usage of Shape-memory alloy",
"there any software simulation tool which I can use to",
"I can use to simulate this material change behavior with",
"would be best if the simulation tools targeted automotive parts",
"3D printing. Is there any software simulation tool which I",
"with respect to time? For example, when introducing a change",
"software simulation tool which I can use to simulate this",
"Note: It would be best if the simulation tools targeted",
"For example, when introducing a change in humidity or temperature.",
"to time? For example, when introducing a change in humidity",
"technology or by means usage of Shape-memory alloy (non-metal, iron",
"can use to simulate this material change behavior with respect",
"change in humidity or temperature. Note: It would be best",
"targeted automotive parts (power train, cooling system, interior & exterior",
"example, when introducing a change in humidity or temperature. Note:",
"(non-metal, iron based, copper based or NiTi material) for 3D",
"or NiTi material) for 3D printing. Is there any software",
"to simulate this material change behavior with respect to time?",
"behavior with respect to time? For example, when introducing a",
"alloy (non-metal, iron based, copper based or NiTi material) for",
"this material change behavior with respect to time? For example,",
"a change in humidity or temperature. Note: It would be",
"copper based or NiTi material) for 3D printing. Is there",
"temperature. Note: It would be best if the simulation tools",
"best if the simulation tools targeted automotive parts (power train,",
"simulation tools targeted automotive parts (power train, cooling system, interior",
"tools targeted automotive parts (power train, cooling system, interior &",
"usage of Shape-memory alloy (non-metal, iron based, copper based or",
"use to simulate this material change behavior with respect to",
"change behavior with respect to time? For example, when introducing",
"or temperature. Note: It would be best if the simulation",
"printing technology or by means usage of Shape-memory alloy (non-metal,",
"Is there any software simulation tool which I can use",
"which I can use to simulate this material change behavior",
"material change behavior with respect to time? For example, when",
"respect to time? For example, when introducing a change in",
"or by means usage of Shape-memory alloy (non-metal, iron based,",
"means usage of Shape-memory alloy (non-metal, iron based, copper based",
"iron based, copper based or NiTi material) for 3D printing.",
"for 3D printing. Is there any software simulation tool which"
] |
[
"printing on, so that a piece of paper can just",
"that a piece of paper can just about slide underneath",
"can just about slide underneath it freely, without catching. Is",
"so that a piece of paper can just about slide",
"the substrate that I am printing on, so that a",
"I have my nozzle close to the substrate that I",
"it freely, without catching. Is this the right way to",
"my nozzle close to the substrate that I am printing",
"freely, without catching. Is this the right way to do",
"about slide underneath it freely, without catching. Is this the",
"underneath it freely, without catching. Is this the right way",
"substrate that I am printing on, so that a piece",
"paper can just about slide underneath it freely, without catching.",
"without catching. Is this the right way to do it?",
"close to the substrate that I am printing on, so",
"just about slide underneath it freely, without catching. Is this",
"have my nozzle close to the substrate that I am",
"that I am printing on, so that a piece of",
"am printing on, so that a piece of paper can",
"I am printing on, so that a piece of paper",
"piece of paper can just about slide underneath it freely,",
"to the substrate that I am printing on, so that",
"nozzle close to the substrate that I am printing on,",
"slide underneath it freely, without catching. Is this the right",
"on, so that a piece of paper can just about",
"a piece of paper can just about slide underneath it",
"of paper can just about slide underneath it freely, without"
] |
[
"print head to ram the part off the build plate",
"What are the methods to auto eject parts (into a",
"the part off the build plate into a basket nearby",
"am planning to use a Cartesian XY-Head type (like CoreXY)",
"XY axes are on the ceiling of the printer using",
"hidden reason why? Will using the print head to ram",
"axes are on the ceiling of the printer using belts",
"CoreXY) printer, where the build plate moves along the Z",
"reason why? Will using the print head to ram the",
"off the build plate into a basket nearby cause the",
"continue printing? For some reason this feature isn't common (yet?).",
"methods to auto eject parts (into a collection area/box/basket) in",
"planning to use a Cartesian XY-Head type (like CoreXY) printer,",
"to misalign (if using belts). I am planning to use",
"build plate moves along the Z axis and XY axes",
"this feature isn't common (yet?). Is there a hidden reason",
"For some reason this feature isn't common (yet?). Is there",
"ceiling of the printer using belts to move the print",
"eject parts (into a collection area/box/basket) in order for the",
"misalign (if using belts). I am planning to use a",
"plate moves along the Z axis and XY axes are",
"I am planning to use a Cartesian XY-Head type (like",
"a collection area/box/basket) in order for the 3D printer to",
"are the methods to auto eject parts (into a collection",
"(yet?). Is there a hidden reason why? Will using the",
"build plate into a basket nearby cause the print head",
"area/box/basket) in order for the 3D printer to continue printing?",
"printer, where the build plate moves along the Z axis",
"on the ceiling of the printer using belts to move",
"XY-Head type (like CoreXY) printer, where the build plate moves",
"the 3D printer to continue printing? For some reason this",
"isn't common (yet?). Is there a hidden reason why? Will",
"why? Will using the print head to ram the part",
"to continue printing? For some reason this feature isn't common",
"common (yet?). Is there a hidden reason why? Will using",
"Will using the print head to ram the part off",
"belts). I am planning to use a Cartesian XY-Head type",
"using the print head to ram the part off the",
"the ceiling of the printer using belts to move the",
"the build plate moves along the Z axis and XY",
"axis and XY axes are on the ceiling of the",
"the print head to ram the part off the build",
"the Z axis and XY axes are on the ceiling",
"a basket nearby cause the print head to misalign (if",
"the methods to auto eject parts (into a collection area/box/basket)",
"in order for the 3D printer to continue printing? For",
"where the build plate moves along the Z axis and",
"reason this feature isn't common (yet?). Is there a hidden",
"feature isn't common (yet?). Is there a hidden reason why?",
"there a hidden reason why? Will using the print head",
"for the 3D printer to continue printing? For some reason",
"the print head to misalign (if using belts). I am",
"a Cartesian XY-Head type (like CoreXY) printer, where the build",
"basket nearby cause the print head to misalign (if using",
"Cartesian XY-Head type (like CoreXY) printer, where the build plate",
"ram the part off the build plate into a basket",
"head to ram the part off the build plate into",
"to auto eject parts (into a collection area/box/basket) in order",
"parts (into a collection area/box/basket) in order for the 3D",
"type (like CoreXY) printer, where the build plate moves along",
"into a basket nearby cause the print head to misalign",
"plate into a basket nearby cause the print head to",
"print head to misalign (if using belts). I am planning",
"some reason this feature isn't common (yet?). Is there a",
"printer to continue printing? For some reason this feature isn't",
"part off the build plate into a basket nearby cause",
"the build plate into a basket nearby cause the print",
"auto eject parts (into a collection area/box/basket) in order for",
"to use a Cartesian XY-Head type (like CoreXY) printer, where",
"are on the ceiling of the printer using belts to",
"Is there a hidden reason why? Will using the print",
"and XY axes are on the ceiling of the printer",
"printing? For some reason this feature isn't common (yet?). Is",
"nearby cause the print head to misalign (if using belts).",
"to ram the part off the build plate into a",
"a hidden reason why? Will using the print head to",
"moves along the Z axis and XY axes are on",
"using belts). I am planning to use a Cartesian XY-Head",
"3D printer to continue printing? For some reason this feature",
"cause the print head to misalign (if using belts). I",
"order for the 3D printer to continue printing? For some",
"(into a collection area/box/basket) in order for the 3D printer",
"Z axis and XY axes are on the ceiling of",
"(like CoreXY) printer, where the build plate moves along the",
"along the Z axis and XY axes are on the",
"collection area/box/basket) in order for the 3D printer to continue",
"head to misalign (if using belts). I am planning to",
"(if using belts). I am planning to use a Cartesian",
"of the printer using belts to move the print head.",
"use a Cartesian XY-Head type (like CoreXY) printer, where the"
] |
[
"acceleration: 3000 * Default Ejerk: 5 How can I solve",
"steps) * Default acceleration: 3000 * Default retract acceleration: 3000",
"it is fine. I have replaced the old (prehistorical) extruder",
"image description here](https://i.stack.imgur.com/2axcC.jpg)](https://i.stack.imgur.com/2axcC.jpg) This is a 20 mm cube I",
"me the problem with a new one. The issue does",
"retract acceleration: 3000 * Default Ejerk: 5 How can I",
"I stopped after 15 layers! Here is another 20 mm",
"following setting in Slic3: * Layer height: 0,16 * First",
"* Default Ejerk: 5 How can I solve this problem?",
"I did calibrate the extruder to extrude exactly 50/100 mm",
"perfect but is absolutely a mess. [](https://i.stack.imgur.com/zZTMq.jpg)",
"acceleration: 3000 * Default retract acceleration: 3000 * Default Ejerk:",
"In Marlin I have the following setting for the extruder:",
"one. The issue does not go away. It is severely",
"3000 * Default Ejerk: 5 How can I solve this",
"clean but when printing its a mess. I have the",
"are perfect but is absolutely a mess. [](https://i.stack.imgur.com/2axcC.jpg) This is",
"temperature: 184°C * Extrusion multiplier: 1 * Fill density: 15%",
"Default Ejerk: 5 How can I solve this problem? [](https://i.stack.imgur.com/2axcC.jpg) This is a 20",
"cube I stopped after 15 layers! Here is another 20",
"is another 20 mm cube, the dimensions are perfect but",
"away. It is severely under extruded. The nozzle is a",
"Extrusion multiplier: 1 * Fill density: 15% In Marlin I",
"have the following setting for the extruder: * Steps per",
"20 mm cube I stopped after 15 layers! Here is",
"mess. I have the following setting in Slic3: * Layer",
"20 mm cube, the dimensions are perfect but is absolutely",
"is fine. I have replaced the old (prehistorical) extruder that",
"the following setting for the extruder: * Steps per unit:",
"Slic3: * Layer height: 0,16 * First layer height: 0,16",
"was giving me the problem with a new one. The",
"layers! Here is another 20 mm cube, the dimensions are",
"and it is fine. I have replaced the old (prehistorical)",
"a mess. I have the following setting in Slic3: *",
"problem? [](https://i.stack.imgur.com/2axcC.jpg) This is a 20 mm",
"I extrude manually the extrusion is nice and clean but",
"per unit: 1450 (I use micro steps) * Default acceleration:",
"setting for the extruder: * Steps per unit: 1450 (I",
"5 How can I solve this problem? [](https://i.stack.imgur.com/2axcC.jpg) This is a 20 mm cube I stopped",
"calibrate the extruder to extrude exactly 50/100 mm and it",
"* Steps per unit: 1450 (I use micro steps) *",
"the extrusion is nice and clean but when printing its",
"Extruder temperature: 184°C * Extrusion multiplier: 1 * Fill density:",
"the old (prehistorical) extruder that was giving me the problem",
"the extruder: * Steps per unit: 1450 (I use micro",
"nice and clean but when printing its a mess. I",
"diameter: 2,94 * Extruder temperature: 184°C * Extrusion multiplier: 1",
"* Layer height: 0,16 * First layer height: 0,16 *",
"is a 0.4 mm, if I extrude manually the extrusion",
"extruder that was giving me the problem with a new",
"go away. It is severely under extruded. The nozzle is",
"extrusion is nice and clean but when printing its a",
"[](https://i.stack.imgur.com/2axcC.jpg) This is a 20 mm cube",
"a 0.4 mm, if I extrude manually the extrusion is",
"under extruded. The nozzle is a 0.4 mm, if I",
"the problem with a new one. The issue does not",
"* Default retract acceleration: 3000 * Default Ejerk: 5 How",
"is nice and clean but when printing its a mess.",
"The nozzle is a 0.4 mm, if I extrude manually",
"I have the following setting for the extruder: * Steps",
"height: 0,16 * Filament diameter: 2,94 * Extruder temperature: 184°C",
"new one. The issue does not go away. It is",
"* First layer height: 0,16 * Filament diameter: 2,94 *",
"another 20 mm cube, the dimensions are perfect but is",
"Default retract acceleration: 3000 * Default Ejerk: 5 How can",
"* Extruder temperature: 184°C * Extrusion multiplier: 1 * Fill",
"problem with a new one. The issue does not go",
"old (prehistorical) extruder that was giving me the problem with",
"Ejerk: 5 How can I solve this problem? [](https://i.stack.imgur.com/2axcC.jpg) This is a 20 mm cube I stopped after",
"First layer height: 0,16 * Filament diameter: 2,94 * Extruder",
"stopped after 15 layers! Here is another 20 mm cube,",
"Filament diameter: 2,94 * Extruder temperature: 184°C * Extrusion multiplier:",
"extrude exactly 50/100 mm and it is fine. I have",
"15% In Marlin I have the following setting for the",
"mm, if I extrude manually the extrusion is nice and",
"How can I solve this problem? [](https://i.stack.imgur.com/2axcC.jpg)",
"solve this problem? [](https://i.stack.imgur.com/2axcC.jpg) This is a",
"mm and it is fine. I have replaced the old",
"and clean but when printing its a mess. I have",
"184°C * Extrusion multiplier: 1 * Fill density: 15% In",
"is severely under extruded. The nozzle is a 0.4 mm,",
"dimensions are perfect but is absolutely a mess. [](https://i.stack.imgur.com/2axcC.jpg) This",
"with a new one. The issue does not go away.",
"use micro steps) * Default acceleration: 3000 * Default retract",
"replaced the old (prehistorical) extruder that was giving me the",
"the following setting in Slic3: * Layer height: 0,16 *",
"exactly 50/100 mm and it is fine. I have replaced",
"I have the following setting in Slic3: * Layer height:",
"3000 * Default retract acceleration: 3000 * Default Ejerk: 5",
"Default acceleration: 3000 * Default retract acceleration: 3000 * Default",
"* Default acceleration: 3000 * Default retract acceleration: 3000 *",
"1 * Fill density: 15% In Marlin I have the",
"extrude manually the extrusion is nice and clean but when",
"* Filament diameter: 2,94 * Extruder temperature: 184°C * Extrusion",
"its a mess. I have the following setting in Slic3:",
"unit: 1450 (I use micro steps) * Default acceleration: 3000",
"mm cube, the dimensions are perfect but is absolutely a",
"1450 (I use micro steps) * Default acceleration: 3000 *",
"have the following setting in Slic3: * Layer height: 0,16",
"the dimensions are perfect but is absolutely a mess. [![enter",
"is a 20 mm cube I stopped after 15 layers!",
"I have replaced the old (prehistorical) extruder that was giving",
"2,94 * Extruder temperature: 184°C * Extrusion multiplier: 1 *",
"a new one. The issue does not go away. It"
] |
[
"indeed too thin [](https://i.stack.imgur.com/U1iy4.gif) It's might to",
"just short of the bottom edge of the z stage.",
"so it's pushed more towards the left. 1) how do",
"it is indeed too thin [](https://i.stack.imgur.com/U1iy4.gif) It's",
"the thickness of the bracket in the stl 2) HOw",
"make it thicker if it is indeed too thin [](https://i.stack.imgur.com/U1iy4.gif) It's might to be",
"[](https://i.stack.imgur.com/U1iy4.gif) It's might to be mounted standing",
"of the z stage. I'm trying to make the bracket",
"to be mounted standing up right. I want to make",
"bottom edge of the z stage. I'm trying to make",
"if it is indeed too thin [](https://i.stack.imgur.com/U1iy4.gif)",
"the z stage. I'm trying to make the bracket thicker",
"of the bracket in the stl 2) HOw would I",
"had a problem with my Z limit switch bracket falling",
"Z limit switch bracket falling just short of the bottom",
"z stage. I'm trying to make the bracket thicker so",
"the bottom edge of the z stage. I'm trying to",
"might to be mounted standing up right. I want to",
"I want to make it thicker x axis (if it's",
"want to make it thicker x axis (if it's stood",
"bracket falling just short of the bottom edge of the",
"of the bottom edge of the z stage. I'm trying",
"I'm trying to make the bracket thicker so it's pushed",
"I make it thicker if it is indeed too thin",
"I measure the thickness of the bracket in the stl",
"the bracket in the stl 2) HOw would I make",
"be mounted standing up right. I want to make it",
"with my Z limit switch bracket falling just short of",
"switch bracket falling just short of the bottom edge of",
"stage. I'm trying to make the bracket thicker so it's",
"how do I measure the thickness of the bracket in",
"limit switch bracket falling just short of the bottom edge",
"towards the left. 1) how do I measure the thickness",
"measure the thickness of the bracket in the stl 2)",
"my Z limit switch bracket falling just short of the",
"a problem with my Z limit switch bracket falling just",
"edge of the z stage. I'm trying to make the",
"HOw would I make it thicker if it is indeed",
"the bracket thicker so it's pushed more towards the left.",
"thicker if it is indeed too thin [](https://i.stack.imgur.com/U1iy4.gif) It's might to be mounted standing up right. I",
"stl 2) HOw would I make it thicker if it",
"It's might to be mounted standing up right. I want",
"problem with my Z limit switch bracket falling just short",
"image description here](https://i.stack.imgur.com/U1iy4.gif)](https://i.stack.imgur.com/U1iy4.gif) It's might to be mounted standing up",
"do I measure the thickness of the bracket in the",
"left. 1) how do I measure the thickness of the",
"bracket in the stl 2) HOw would I make it",
"the stl 2) HOw would I make it thicker if",
"2) HOw would I make it thicker if it is",
"the left. 1) how do I measure the thickness of",
"is indeed too thin [](https://i.stack.imgur.com/U1iy4.gif) It's might",
"to make it thicker x axis (if it's stood up)",
"pushed more towards the left. 1) how do I measure",
"thicker so it's pushed more towards the left. 1) how",
"falling just short of the bottom edge of the z",
"up right. I want to make it thicker x axis",
"standing up right. I want to make it thicker x",
"description here](https://i.stack.imgur.com/U1iy4.gif)](https://i.stack.imgur.com/U1iy4.gif) It's might to be mounted standing up right.",
"1) how do I measure the thickness of the bracket",
"trying to make the bracket thicker so it's pushed more",
"thickness of the bracket in the stl 2) HOw would",
"would I make it thicker if it is indeed too",
"I had a problem with my Z limit switch bracket",
"thin [](https://i.stack.imgur.com/U1iy4.gif) It's might to be mounted",
"make the bracket thicker so it's pushed more towards the",
"right. I want to make it thicker x axis (if",
"it's pushed more towards the left. 1) how do I",
"in the stl 2) HOw would I make it thicker",
"mounted standing up right. I want to make it thicker"
] |
[
"FDM RP. I've done a lot of work on ZCorp",
"I want the print nozzle to follow. Is this possible",
"possible or has it been done? If so, what software",
"a hack? Another question is, can you print a part",
"has it been done? If so, what software or is",
"of work on ZCorp and Connex. The question is can",
"or is there a hack? Another question is, can you",
"is, can you print a part with no sidewall or",
"I am new to FDM RP. I've done a lot",
"a lot of work on ZCorp and Connex. The question",
"can generate curves that I want the print nozzle to",
"software or is there a hack? Another question is, can",
"I can generate curves that I want the print nozzle",
"question is, can you print a part with no sidewall",
"nozzle to follow. Is this possible or has it been",
"If so, what software or is there a hack? Another",
"nozzle? Within a 3D volume I can generate curves that",
"you print a part with no sidewall or containment boundary?",
"Connex. The question is can vectors curve drive an extrusion",
"follow. Is this possible or has it been done? If",
"lot of work on ZCorp and Connex. The question is",
"ZCorp and Connex. The question is can vectors curve drive",
"this possible or has it been done? If so, what",
"to follow. Is this possible or has it been done?",
"or has it been done? If so, what software or",
"I've done a lot of work on ZCorp and Connex.",
"vectors curve drive an extrusion nozzle? Within a 3D volume",
"generate curves that I want the print nozzle to follow.",
"curves that I want the print nozzle to follow. Is",
"can vectors curve drive an extrusion nozzle? Within a 3D",
"been done? If so, what software or is there a",
"there a hack? Another question is, can you print a",
"drive an extrusion nozzle? Within a 3D volume I can",
"question is can vectors curve drive an extrusion nozzle? Within",
"is can vectors curve drive an extrusion nozzle? Within a",
"what software or is there a hack? Another question is,",
"and Connex. The question is can vectors curve drive an",
"RP. I've done a lot of work on ZCorp and",
"am new to FDM RP. I've done a lot of",
"new to FDM RP. I've done a lot of work",
"done a lot of work on ZCorp and Connex. The",
"work on ZCorp and Connex. The question is can vectors",
"that I want the print nozzle to follow. Is this",
"want the print nozzle to follow. Is this possible or",
"curve drive an extrusion nozzle? Within a 3D volume I",
"hack? Another question is, can you print a part with",
"Another question is, can you print a part with no",
"so, what software or is there a hack? Another question",
"Within a 3D volume I can generate curves that I",
"Is this possible or has it been done? If so,",
"it been done? If so, what software or is there",
"done? If so, what software or is there a hack?",
"on ZCorp and Connex. The question is can vectors curve",
"extrusion nozzle? Within a 3D volume I can generate curves",
"an extrusion nozzle? Within a 3D volume I can generate",
"3D volume I can generate curves that I want the",
"volume I can generate curves that I want the print",
"the print nozzle to follow. Is this possible or has",
"a 3D volume I can generate curves that I want",
"print nozzle to follow. Is this possible or has it",
"to FDM RP. I've done a lot of work on",
"The question is can vectors curve drive an extrusion nozzle?",
"can you print a part with no sidewall or containment",
"is there a hack? Another question is, can you print"
] |
[
"The black letters are 4\" x 2.5\", blue are 3\"",
"white back lit Plexiglass. As the letters are quite thin,",
"that points east & west so the letters will be",
"American Legion and the colors are black, blue, and red",
"two years now and have had good prints. ABS on",
"to treat them with UV protection spray and attach them",
"The original was painted with spray paint and the red",
"spray and attach them with clear epoxy to white back",
"hangs on a pole that points east & west so",
"black, blue, and red and are 0.8 mm thin. The",
"the American Legion and the colors are black, blue, and",
"with UV protection spray and attach them with clear epoxy",
"north and south. The original was painted with spray paint",
"with spray paint and the red paint south side faded",
"x 2\" and the red are 7.75\" x 5.5\". I",
"PLA. I am getting ready to do a sign for",
"the other hand has not been so good, so my",
"it at all. The sign had been there for some",
"paint and the red paint south side faded to the",
"them with clear epoxy to white back lit Plexiglass. As",
"As the letters are quite thin, my question is how",
"0.8 mm thin. The black letters are 4\" x 2.5\",",
"getting ready to do a sign for the American Legion",
"protection spray and attach them with clear epoxy to white",
"up in the weather? The sign hangs on a pole",
"are quite thin, my question is how well will this",
"and south. The original was painted with spray paint and",
"original was painted with spray paint and the red paint",
"The sign had been there for some time and was",
"east & west so the letters will be facing north",
"are 0.8 mm thin. The black letters are 4\" x",
"sign for the American Legion and the colors are black,",
"filament for two years now and have had good prints.",
"Legion and the colors are black, blue, and red and",
"ABS on the other hand has not been so good,",
"the letters are quite thin, my question is how well",
"well will this hold up in the weather? The sign",
"you could hardly see it at all. The sign had",
"so my choice of filament is PLA. I am getting",
"a pole that points east & west so the letters",
"paint south side faded to the point you could hardly",
"is how well will this hold up in the weather?",
"good, so my choice of filament is PLA. I am",
"have been using PLA filament for two years now and",
"mm thin. The black letters are 4\" x 2.5\", blue",
"could hardly see it at all. The sign had been",
"quite thin, my question is how well will this hold",
"a sign for the American Legion and the colors are",
"are black, blue, and red and are 0.8 mm thin.",
"painted with spray paint and the red paint south side",
"sign hangs on a pole that points east & west",
"2.5\", blue are 3\" x 2\" and the red are",
"will this hold up in the weather? The sign hangs",
"to do a sign for the American Legion and the",
"my choice of filament is PLA. I am getting ready",
"my question is how well will this hold up in",
"and are 0.8 mm thin. The black letters are 4\"",
"letters are quite thin, my question is how well will",
"of filament is PLA. I am getting ready to do",
"at all. The sign had been there for some time",
"4\" x 2.5\", blue are 3\" x 2\" and the",
"the red paint south side faded to the point you",
"7.75\" x 5.5\". I plan to treat them with UV",
"the letters will be facing north and south. The original",
"colors are black, blue, and red and are 0.8 mm",
"for some time and was done at a professional sign",
"side faded to the point you could hardly see it",
"south side faded to the point you could hardly see",
"the red are 7.75\" x 5.5\". I plan to treat",
"blue are 3\" x 2\" and the red are 7.75\"",
"question is how well will this hold up in the",
"all. The sign had been there for some time and",
"been so good, so my choice of filament is PLA.",
"black letters are 4\" x 2.5\", blue are 3\" x",
"west so the letters will be facing north and south.",
"back lit Plexiglass. As the letters are quite thin, my",
"for the American Legion and the colors are black, blue,",
"PLA filament for two years now and have had good",
"and the colors are black, blue, and red and are",
"are 7.75\" x 5.5\". I plan to treat them with",
"are 4\" x 2.5\", blue are 3\" x 2\" and",
"plan to treat them with UV protection spray and attach",
"clear epoxy to white back lit Plexiglass. As the letters",
"south. The original was painted with spray paint and the",
"had been there for some time and was done at",
"good prints. ABS on the other hand has not been",
"other hand has not been so good, so my choice",
"lit Plexiglass. As the letters are quite thin, my question",
"letters will be facing north and south. The original was",
"thin, my question is how well will this hold up",
"hand has not been so good, so my choice of",
"in the weather? The sign hangs on a pole that",
"was painted with spray paint and the red paint south",
"red are 7.75\" x 5.5\". I plan to treat them",
"pole that points east & west so the letters will",
"spray paint and the red paint south side faded to",
"not been so good, so my choice of filament is",
"red and are 0.8 mm thin. The black letters are",
"x 2.5\", blue are 3\" x 2\" and the red",
"see it at all. The sign had been there for",
"x 5.5\". I plan to treat them with UV protection",
"so the letters will be facing north and south. The",
"filament is PLA. I am getting ready to do a",
"to white back lit Plexiglass. As the letters are quite",
"them with UV protection spray and attach them with clear",
"do a sign for the American Legion and the colors",
"and the red are 7.75\" x 5.5\". I plan to",
"blue, and red and are 0.8 mm thin. The black",
"letters are 4\" x 2.5\", blue are 3\" x 2\"",
"and attach them with clear epoxy to white back lit",
"be facing north and south. The original was painted with",
"points east & west so the letters will be facing",
"will be facing north and south. The original was painted",
"hold up in the weather? The sign hangs on a",
"choice of filament is PLA. I am getting ready to",
"Plexiglass. As the letters are quite thin, my question is",
"am getting ready to do a sign for the American",
"so good, so my choice of filament is PLA. I",
"sign had been there for some time and was done",
"and have had good prints. ABS on the other hand",
"are 3\" x 2\" and the red are 7.75\" x",
"years now and have had good prints. ABS on the",
"now and have had good prints. ABS on the other",
"facing north and south. The original was painted with spray",
"on the other hand has not been so good, so",
"faded to the point you could hardly see it at",
"been there for some time and was done at a",
"The sign hangs on a pole that points east &",
"5.5\". I plan to treat them with UV protection spray",
"for two years now and have had good prints. ABS",
"3\" x 2\" and the red are 7.75\" x 5.5\".",
"using PLA filament for two years now and have had",
"hardly see it at all. The sign had been there",
"the colors are black, blue, and red and are 0.8",
"ready to do a sign for the American Legion and",
"the point you could hardly see it at all. The",
"with clear epoxy to white back lit Plexiglass. As the",
"been using PLA filament for two years now and have",
"to the point you could hardly see it at all.",
"on a pole that points east & west so the",
"this hold up in the weather? The sign hangs on",
"there for some time and was done at a professional",
"is PLA. I am getting ready to do a sign",
"2\" and the red are 7.75\" x 5.5\". I plan",
"UV protection spray and attach them with clear epoxy to",
"red paint south side faded to the point you could",
"I have been using PLA filament for two years now",
"and red and are 0.8 mm thin. The black letters",
"thin. The black letters are 4\" x 2.5\", blue are",
"have had good prints. ABS on the other hand has",
"epoxy to white back lit Plexiglass. As the letters are",
"I plan to treat them with UV protection spray and",
"the weather? The sign hangs on a pole that points",
"has not been so good, so my choice of filament",
"& west so the letters will be facing north and",
"some time and was done at a professional sign company.",
"how well will this hold up in the weather? The",
"prints. ABS on the other hand has not been so",
"and the red paint south side faded to the point",
"had good prints. ABS on the other hand has not",
"I am getting ready to do a sign for the",
"treat them with UV protection spray and attach them with",
"weather? The sign hangs on a pole that points east",
"attach them with clear epoxy to white back lit Plexiglass.",
"point you could hardly see it at all. The sign"
] |
[
"be a cylinder. [](https://i.stack.imgur.com/owZtw.jpg)",
"problem reduces. Note that the hole is supposed to be",
"is supposed to be a cylinder. [![Photo of four balls",
"[![Photo of four balls exhibiting bumps around a cyclindrical through",
"be a cooling issue so I printed 4 at once",
"but the issue still occurred. If I size the ball",
"here. I printed it as a single ball and had",
"ball and had this effect. I thought it might be",
"printed 4 at once but the issue still occurred. If",
"quite sure what's happening here. I printed it as a",
"that the hole is supposed to be a cylinder. [![Photo",
"a cooling issue so I printed 4 at once but",
"had this effect. I thought it might be a cooling",
"might be a cooling issue so I printed 4 at",
"at once but the issue still occurred. If I size",
"cooling issue so I printed 4 at once but the",
"If I size the ball up, the problem reduces. Note",
"so I printed 4 at once but the issue still",
"what's happening here. I printed it as a single ball",
"Not quite sure what's happening here. I printed it as",
"Note that the hole is supposed to be a cylinder.",
"effect. I thought it might be a cooling issue so",
"the issue still occurred. If I size the ball up,",
"I size the ball up, the problem reduces. Note that",
"a cylinder. [![Photo of four balls exhibiting bumps around a",
"as a single ball and had this effect. I thought",
"I printed it as a single ball and had this",
"I printed 4 at once but the issue still occurred.",
"occurred. If I size the ball up, the problem reduces.",
"reduces. Note that the hole is supposed to be a",
"ball up, the problem reduces. Note that the hole is",
"supposed to be a cylinder. [![Photo of four balls exhibiting",
"issue so I printed 4 at once but the issue",
"to be a cylinder. [![Photo of four balls exhibiting bumps",
"it might be a cooling issue so I printed 4",
"the ball up, the problem reduces. Note that the hole",
"a single ball and had this effect. I thought it",
"hole is supposed to be a cylinder. [![Photo of four",
"size the ball up, the problem reduces. Note that the",
"the problem reduces. Note that the hole is supposed to",
"thought it might be a cooling issue so I printed",
"once but the issue still occurred. If I size the",
"sure what's happening here. I printed it as a single",
"cylinder. [![Photo of four balls exhibiting bumps around a cyclindrical",
"single ball and had this effect. I thought it might",
"this effect. I thought it might be a cooling issue",
"it as a single ball and had this effect. I",
"4 at once but the issue still occurred. If I",
"happening here. I printed it as a single ball and",
"the hole is supposed to be a cylinder. [![Photo of",
"and had this effect. I thought it might be a",
"still occurred. If I size the ball up, the problem",
"up, the problem reduces. Note that the hole is supposed",
"I thought it might be a cooling issue so I"
] |
[
"filament and Simplify3D 3.1.0 slicing. Settings: * 0.35 mm nozzle,",
"but perhaps could be related). The screw hole mounts seem",
"print work means I haven't found or addressed the true",
"me: [](https://i.stack.imgur.com/4IgaU.png) No 90 degree transitions - I",
"and Simplify3D 3.1.0 slicing. Settings: * 0.35 mm nozzle, 0.40",
"have to think that maxing out S3D's outline overlap setting",
"bottom layers, 2 perimeter shells (maybe should try 3?) *",
"last night they had serious problems: [](https://i.stack.imgur.com/ZXNsE.jpg) [](https://i.stack.imgur.com/USaAE.jpg)",
"haven't seen a problem like that before. Extrusion rate seems",
"changed the printhead on my DeltaMaker from stock to an",
"is 220°C (thermocouple wedged between nozzle and heater block reports",
"E3D Lite6, and am struggling to get back to my",
"- there's just one small hole at the base of",
"in most respects except for where vertical structures rise up",
"the print a few layers after the problem layers do",
"structures rise up from the horizontal surface (and a retraction/stringing",
"[](https://i.stack.imgur.com/USaAE.jpg) I haven't seen a problem like that before.",
"of my problems. But last night they had serious problems:",
"3 top, 3 bottom layers, 2 perimeter shells (maybe should",
"in and tried a bigger print last night. It turned",
"I would think this would be the least of my",
"my problems. But last night they had serious problems: [](https://i.stack.imgur.com/4IgaU.png) No 90 degree transitions",
"from the horizontal surface (and a retraction/stringing issue that I",
"recipe pretty close to dialed in and tried a bigger",
"(I stopped the print a few layers after the problem",
"Extrusion rate seems basically perfect - why does it look",
"my DeltaMaker from stock to an E3D Lite6, and am",
"related). The screw hole mounts seem well-designed to me: [](https://i.stack.imgur.com/ZXNsE.jpg) [](https://i.stack.imgur.com/USaAE.jpg) I haven't seen a problem like that",
"and repeatability. I thought I had gotten the recipe pretty",
"night. It turned out pretty good in most respects except",
"layer height, 3 top, 3 bottom layers, 2 perimeter shells",
"60% outline overlap, 110% infill extrusion width * Temp is",
"Has anyone seen this issue before? UPDATE: Increasing outline overlap",
"overlap from 60% to 90% *almost* fixes the problem (at",
"stopped the print a few layers after the problem layers",
"quality, reliability, and repeatability. I thought I had gotten the",
"(and a retraction/stringing issue that I didn't think was but",
"would be the least of my problems. But last night",
"had serious problems: [](https://i.stack.imgur.com/ZXNsE.jpg) [](https://i.stack.imgur.com/USaAE.jpg) I haven't seen",
"speed is 2700 mm/min (45 mm/s) Has anyone seen this",
"if not structurally) - there's just one small hole at",
"mm nozzle, 0.40 mm extrusion width, 1.05 extrusion multiplier *",
"Image](https://i.stack.imgur.com/YW5JW.jpg)](https://i.stack.imgur.com/YW5JW.jpg) Going to 99% (Simplify3D's max) would probably get rid",
"close to dialed in and tried a bigger print last",
"print last night. It turned out pretty good in most",
"had gotten the recipe pretty close to dialed in and",
"gotten the recipe pretty close to dialed in and tried",
"transitions - I would think this would be the least",
"bigger print last night. It turned out pretty good in",
"Lite6, and am struggling to get back to my original",
"between nozzle and heater block reports about 206°C when thermistor",
"Increasing outline overlap from 60% to 90% *almost* fixes the",
"small hole at the base of each structure. (I stopped",
"issue before? UPDATE: Increasing outline overlap from 60% to 90%",
"the base of each structure. (I stopped the print a",
"hole at the base of each structure. (I stopped the",
"visually if not structurally) - there's just one small hole",
"screw hole mounts seem well-designed to me: [](https://i.stack.imgur.com/4IgaU.png)",
"preview](https://i.stack.imgur.com/4IgaU.png)](https://i.stack.imgur.com/4IgaU.png) No 90 degree transitions - I would think this",
"seen a problem like that before. Extrusion rate seems basically",
"think was but perhaps could be related). The screw hole",
"an E3D Lite6, and am struggling to get back to",
"and heater block reports about 206°C when thermistor says 220°C)",
"to me: [](https://i.stack.imgur.com/4IgaU.png) No 90 degree transitions -",
"for where vertical structures rise up from the horizontal surface",
"seems basically perfect - why does it look like it",
"this issue before? UPDATE: Increasing outline overlap from 60% to",
"holes but I have to think that maxing out S3D's",
"problem (at least visually if not structurally) - there's just",
"respects except for where vertical structures rise up from the",
"the tops.) [](https://i.stack.imgur.com/YW5JW.jpg) Going to 99% (Simplify3D's max) would",
"is 2700 mm/min (45 mm/s) Has anyone seen this issue",
"3.1.0 slicing. Settings: * 0.35 mm nozzle, 0.40 mm extrusion",
"to just barely make the print work means I haven't",
"layers do ignore the tops.) [](https://i.stack.imgur.com/YW5JW.jpg) Going to 99%",
"mm layer height, 3 top, 3 bottom layers, 2 perimeter",
"make the print work means I haven't found or addressed",
"they had serious problems: [](https://i.stack.imgur.com/ZXNsE.jpg) [](https://i.stack.imgur.com/USaAE.jpg) I haven't",
"mounts seem well-designed to me: [](https://i.stack.imgur.com/4IgaU.png) No 90",
"problems. But last night they had serious problems: [](https://i.stack.imgur.com/ZXNsE.jpg)",
"to dialed in and tried a bigger print last night.",
"overlap, 110% infill extrusion width * Temp is 220°C (thermocouple",
"height, 3 top, 3 bottom layers, 2 perimeter shells (maybe",
"But last night they had serious problems: [](https://i.stack.imgur.com/ZXNsE.jpg) [](https://i.stack.imgur.com/ZXNsE.jpg) [](https://i.stack.imgur.com/USaAE.jpg) I haven't seen a",
"should try 3?) * 30% infill, 60% outline overlap, 110%",
"2 perimeter shells (maybe should try 3?) * 30% infill,",
"like that before. Extrusion rate seems basically perfect - why",
"extruding around the perimeters? I'm using PLA filament and Simplify3D",
"not structurally) - there's just one small hole at the",
"why does it look like it just stopped extruding around",
"mm/s) Has anyone seen this issue before? UPDATE: Increasing outline",
"a few layers after the problem layers do ignore the",
"fixes the problem (at least visually if not structurally) -",
"to get back to my original quality, reliability, and repeatability.",
"issue that I didn't think was but perhaps could be",
"print preview](https://i.stack.imgur.com/4IgaU.png)](https://i.stack.imgur.com/4IgaU.png) No 90 degree transitions - I would think",
"think that maxing out S3D's outline overlap setting to just",
"* Print speed is 2700 mm/min (45 mm/s) Has anyone",
"from stock to an E3D Lite6, and am struggling to",
"this would be the least of my problems. But last",
"am struggling to get back to my original quality, reliability,",
"horizontal surface (and a retraction/stringing issue that I didn't think",
"99% (Simplify3D's max) would probably get rid of those last",
"I didn't think was but perhaps could be related). The",
"be the least of my problems. But last night they",
"try 3?) * 30% infill, 60% outline overlap, 110% infill",
"but I have to think that maxing out S3D's outline",
"where vertical structures rise up from the horizontal surface (and",
"90 degree transitions - I would think this would be",
"slicing. Settings: * 0.35 mm nozzle, 0.40 mm extrusion width,",
"one small hole at the base of each structure. (I",
"work means I haven't found or addressed the true root",
"reliability, and repeatability. I thought I had gotten the recipe",
"printhead on my DeltaMaker from stock to an E3D Lite6,",
"after the problem layers do ignore the tops.) [](https://i.stack.imgur.com/YW5JW.jpg)",
"perfect - why does it look like it just stopped",
"0.15 mm layer height, 3 top, 3 bottom layers, 2",
"Going to 99% (Simplify3D's max) would probably get rid of",
"2](https://i.stack.imgur.com/USaAE.jpg)](https://i.stack.imgur.com/USaAE.jpg) I haven't seen a problem like that before. Extrusion",
"night they had serious problems: [](https://i.stack.imgur.com/ZXNsE.jpg) [](https://i.stack.imgur.com/USaAE.jpg) I",
"the perimeters? I'm using PLA filament and Simplify3D 3.1.0 slicing.",
"* 30% infill, 60% outline overlap, 110% infill extrusion width",
"be related). The screw hole mounts seem well-designed to me:",
"S3D's outline overlap setting to just barely make the print",
"using PLA filament and Simplify3D 3.1.0 slicing. Settings: * 0.35",
"(45 mm/s) Has anyone seen this issue before? UPDATE: Increasing",
"problem layers do ignore the tops.) [](https://i.stack.imgur.com/YW5JW.jpg) Going to",
"nozzle and heater block reports about 206°C when thermistor says",
"last night. It turned out pretty good in most respects",
"anyone seen this issue before? UPDATE: Increasing outline overlap from",
"[](https://i.stack.imgur.com/ZXNsE.jpg) [](https://i.stack.imgur.com/USaAE.jpg) I haven't seen a problem like",
"structurally) - there's just one small hole at the base",
"width * Temp is 220°C (thermocouple wedged between nozzle and",
"before. Extrusion rate seems basically perfect - why does it",
"I had gotten the recipe pretty close to dialed in",
"3?) * 30% infill, 60% outline overlap, 110% infill extrusion",
"110% infill extrusion width * Temp is 220°C (thermocouple wedged",
"good in most respects except for where vertical structures rise",
"like it just stopped extruding around the perimeters? I'm using",
"that I didn't think was but perhaps could be related).",
"basically perfect - why does it look like it just",
"mm extrusion width, 1.05 extrusion multiplier * 0.15 mm layer",
"(thermocouple wedged between nozzle and heater block reports about 206°C",
"except for where vertical structures rise up from the horizontal",
"90% *almost* fixes the problem (at least visually if not",
"(Simplify3D's max) would probably get rid of those last holes",
"of those last holes but I have to think that",
"Settings: * 0.35 mm nozzle, 0.40 mm extrusion width, 1.05",
"* Temp is 220°C (thermocouple wedged between nozzle and heater",
"a bigger print last night. It turned out pretty good",
"the problem layers do ignore the tops.) [](https://i.stack.imgur.com/YW5JW.jpg) Going",
"the least of my problems. But last night they had",
"last holes but I have to think that maxing out",
"reports about 206°C when thermistor says 220°C) * Print speed",
"block reports about 206°C when thermistor says 220°C) * Print",
"vertical structures rise up from the horizontal surface (and a",
"think this would be the least of my problems. But",
"pretty good in most respects except for where vertical structures",
"problems: [](https://i.stack.imgur.com/ZXNsE.jpg) [](https://i.stack.imgur.com/USaAE.jpg) I haven't seen a problem",
"0.35 mm nozzle, 0.40 mm extrusion width, 1.05 extrusion multiplier",
"says 220°C) * Print speed is 2700 mm/min (45 mm/s)",
"repeatability. I thought I had gotten the recipe pretty close",
"each structure. (I stopped the print a few layers after",
"would probably get rid of those last holes but I",
"the print work means I haven't found or addressed the",
"tried a bigger print last night. It turned out pretty",
"get rid of those last holes but I have to",
"recently changed the printhead on my DeltaMaker from stock to",
"stopped extruding around the perimeters? I'm using PLA filament and",
"out S3D's outline overlap setting to just barely make the",
"I thought I had gotten the recipe pretty close to",
"dialed in and tried a bigger print last night. It",
"would think this would be the least of my problems.",
"I haven't seen a problem like that before. Extrusion rate",
"about 206°C when thermistor says 220°C) * Print speed is",
"at the base of each structure. (I stopped the print",
"just one small hole at the base of each structure.",
"and tried a bigger print last night. It turned out",
"that before. Extrusion rate seems basically perfect - why does",
"few layers after the problem layers do ignore the tops.)",
"do ignore the tops.) [](https://i.stack.imgur.com/YW5JW.jpg) Going to 99% (Simplify3D's",
"extrusion width * Temp is 220°C (thermocouple wedged between nozzle",
"maxing out S3D's outline overlap setting to just barely make",
"ignore the tops.) [](https://i.stack.imgur.com/YW5JW.jpg) Going to 99% (Simplify3D's max)",
"0.40 mm extrusion width, 1.05 extrusion multiplier * 0.15 mm",
"206°C when thermistor says 220°C) * Print speed is 2700",
"structure. (I stopped the print a few layers after the",
"layers after the problem layers do ignore the tops.) [](https://i.stack.imgur.com/4IgaU.png) No 90 degree",
"2700 mm/min (45 mm/s) Has anyone seen this issue before?",
"30% infill, 60% outline overlap, 110% infill extrusion width *",
"just barely make the print work means I haven't found",
"220°C (thermocouple wedged between nozzle and heater block reports about",
"1.05 extrusion multiplier * 0.15 mm layer height, 3 top,",
"heater block reports about 206°C when thermistor says 220°C) *",
"to 99% (Simplify3D's max) would probably get rid of those",
"barely make the print work means I haven't found or",
"layers, 2 perimeter shells (maybe should try 3?) * 30%",
"*almost* fixes the problem (at least visually if not structurally)",
"it look like it just stopped extruding around the perimeters?",
"- why does it look like it just stopped extruding",
"wedged between nozzle and heater block reports about 206°C when",
"the horizontal surface (and a retraction/stringing issue that I didn't",
"seen this issue before? UPDATE: Increasing outline overlap from 60%",
"tops.) [](https://i.stack.imgur.com/YW5JW.jpg) Going to 99% (Simplify3D's max) would probably",
"the printhead on my DeltaMaker from stock to an E3D",
"pretty close to dialed in and tried a bigger print",
"the recipe pretty close to dialed in and tried a",
"up from the horizontal surface (and a retraction/stringing issue that",
"problem like that before. Extrusion rate seems basically perfect -",
"I'm using PLA filament and Simplify3D 3.1.0 slicing. Settings: *",
"extrusion multiplier * 0.15 mm layer height, 3 top, 3",
"rise up from the horizontal surface (and a retraction/stringing issue",
"those last holes but I have to think that maxing",
"back to my original quality, reliability, and repeatability. I thought",
"degree transitions - I would think this would be the",
"stock to an E3D Lite6, and am struggling to get",
"perhaps could be related). The screw hole mounts seem well-designed",
"to think that maxing out S3D's outline overlap setting to",
"around the perimeters? I'm using PLA filament and Simplify3D 3.1.0",
"width, 1.05 extrusion multiplier * 0.15 mm layer height, 3",
"perimeters? I'm using PLA filament and Simplify3D 3.1.0 slicing. Settings:",
"a retraction/stringing issue that I didn't think was but perhaps",
"a problem like that before. Extrusion rate seems basically perfect",
"nozzle, 0.40 mm extrusion width, 1.05 extrusion multiplier * 0.15",
"that maxing out S3D's outline overlap setting to just barely",
"does it look like it just stopped extruding around the",
"UPDATE: Increasing outline overlap from 60% to 90% *almost* fixes",
"shells (maybe should try 3?) * 30% infill, 60% outline",
"outline overlap from 60% to 90% *almost* fixes the problem",
"[](https://i.stack.imgur.com/4IgaU.png) No 90 degree transitions - I would",
"PLA filament and Simplify3D 3.1.0 slicing. Settings: * 0.35 mm",
"turned out pretty good in most respects except for where",
"hole mounts seem well-designed to me: [](https://i.stack.imgur.com/4IgaU.png) No",
"Print speed is 2700 mm/min (45 mm/s) Has anyone seen",
"60% to 90% *almost* fixes the problem (at least visually",
"least visually if not structurally) - there's just one small",
"[](https://i.stack.imgur.com/YW5JW.jpg) Going to 99% (Simplify3D's max) would probably get",
"least of my problems. But last night they had serious",
"thought I had gotten the recipe pretty close to dialed",
"just stopped extruding around the perimeters? I'm using PLA filament",
"max) would probably get rid of those last holes but",
"overlap setting to just barely make the print work means",
"before? UPDATE: Increasing outline overlap from 60% to 90% *almost*",
"on my DeltaMaker from stock to an E3D Lite6, and",
"of each structure. (I stopped the print a few layers",
"to an E3D Lite6, and am struggling to get back",
"infill extrusion width * Temp is 220°C (thermocouple wedged between",
"perimeter shells (maybe should try 3?) * 30% infill, 60%",
"original quality, reliability, and repeatability. I thought I had gotten",
"was but perhaps could be related). The screw hole mounts",
"surface (and a retraction/stringing issue that I didn't think was",
"No 90 degree transitions - I would think this would",
"* 0.15 mm layer height, 3 top, 3 bottom layers,",
"my original quality, reliability, and repeatability. I thought I had",
"thermistor says 220°C) * Print speed is 2700 mm/min (45",
"from 60% to 90% *almost* fixes the problem (at least",
"multiplier * 0.15 mm layer height, 3 top, 3 bottom",
"to 90% *almost* fixes the problem (at least visually if",
"get back to my original quality, reliability, and repeatability. I",
"print a few layers after the problem layers do ignore",
"base of each structure. (I stopped the print a few",
"out pretty good in most respects except for where vertical",
"struggling to get back to my original quality, reliability, and",
"could be related). The screw hole mounts seem well-designed to",
"(maybe should try 3?) * 30% infill, 60% outline overlap,",
"outline overlap, 110% infill extrusion width * Temp is 220°C",
"setting to just barely make the print work means I",
"mm/min (45 mm/s) Has anyone seen this issue before? UPDATE:",
"3 bottom layers, 2 perimeter shells (maybe should try 3?)",
"* 0.35 mm nozzle, 0.40 mm extrusion width, 1.05 extrusion",
"I recently changed the printhead on my DeltaMaker from stock",
"220°C) * Print speed is 2700 mm/min (45 mm/s) Has",
"rid of those last holes but I have to think"
] |
[
"smooth again) but it's not safe and even more time",
"of the object? to make it everywhere I could use",
"(0.2-0.5 mm) and that is a time consuming task. Another",
"and even more time consuming. How can I quickly generate",
"the rest of the object? to make it everywhere I",
"that must fit in each other, I usually keep in",
"(basically I remove the rigged surface, making it smooth again)",
"usually keep in mind that prints are 0.2-0.5 mm wider",
"outer surface layer (basically I remove the rigged surface, making",
"rigged surface, making it smooth again) but it's not safe",
"gaps on the contact surfaces between two objects, but not",
"object? to make it everywhere I could use shells, I",
"the whole part and then I slice it with planes",
"guess, but I don't need that on the whole object.",
"prints are 0.2-0.5 mm wider than expected (depending on material)",
"part and then I slice it with planes or lines.",
"mm wider than expected (depending on material) and I size",
"I could use shells, I guess, but I don't need",
"I quickly generate said controlled gaps on the contact surfaces",
"I need to push/pull afterwards each contact surface manually by",
"it's not safe and even more time consuming. How can",
"consuming. How can I quickly generate said controlled gaps on",
"the parts accordingly. However, sometimes I design the whole part",
"that is a time consuming task. Another option is to",
"these cases I need to push/pull afterwards each contact surface",
"layer (basically I remove the rigged surface, making it smooth",
"(depending on material) and I size the parts accordingly. However,",
"said controlled gaps on the contact surfaces between two objects,",
"quickly generate said controlled gaps on the contact surfaces between",
"slice it with planes or lines. In these cases I",
"remove the outer surface layer (basically I remove the rigged",
"consuming task. Another option is to use a cutter to",
"more time consuming. How can I quickly generate said controlled",
"that prints are 0.2-0.5 mm wider than expected (depending on",
"whole part and then I slice it with planes or",
"Another option is to use a cutter to remove the",
"to use a cutter to remove the outer surface layer",
"it everywhere I could use shells, I guess, but I",
"again) but it's not safe and even more time consuming.",
"option is to use a cutter to remove the outer",
"manually by the same amount (0.2-0.5 mm) and that is",
"not on the rest of the object? to make it",
"generate said controlled gaps on the contact surfaces between two",
"I design parts that must fit in each other, I",
"is a time consuming task. Another option is to use",
"each other, I usually keep in mind that prints are",
"with planes or lines. In these cases I need to",
"push/pull afterwards each contact surface manually by the same amount",
"everywhere I could use shells, I guess, but I don't",
"to push/pull afterwards each contact surface manually by the same",
"then I slice it with planes or lines. In these",
"use a cutter to remove the outer surface layer (basically",
"amount (0.2-0.5 mm) and that is a time consuming task.",
"contact surface manually by the same amount (0.2-0.5 mm) and",
"cutter to remove the outer surface layer (basically I remove",
"a time consuming task. Another option is to use a",
"between two objects, but not on the rest of the",
"design the whole part and then I slice it with",
"to remove the outer surface layer (basically I remove the",
"not safe and even more time consuming. How can I",
"contact surfaces between two objects, but not on the rest",
"and I size the parts accordingly. However, sometimes I design",
"could use shells, I guess, but I don't need that",
"even more time consuming. How can I quickly generate said",
"design parts that must fit in each other, I usually",
"controlled gaps on the contact surfaces between two objects, but",
"two objects, but not on the rest of the object?",
"the outer surface layer (basically I remove the rigged surface,",
"but not on the rest of the object? to make",
"surfaces between two objects, but not on the rest of",
"material) and I size the parts accordingly. However, sometimes I",
"How can I quickly generate said controlled gaps on the",
"is to use a cutter to remove the outer surface",
"in each other, I usually keep in mind that prints",
"time consuming task. Another option is to use a cutter",
"cases I need to push/pull afterwards each contact surface manually",
"When I design parts that must fit in each other,",
"or lines. In these cases I need to push/pull afterwards",
"keep in mind that prints are 0.2-0.5 mm wider than",
"accordingly. However, sometimes I design the whole part and then",
"can I quickly generate said controlled gaps on the contact",
"the rigged surface, making it smooth again) but it's not",
"size the parts accordingly. However, sometimes I design the whole",
"and then I slice it with planes or lines. In",
"on the contact surfaces between two objects, but not on",
"and that is a time consuming task. Another option is",
"need to push/pull afterwards each contact surface manually by the",
"lines. In these cases I need to push/pull afterwards each",
"I design the whole part and then I slice it",
"parts that must fit in each other, I usually keep",
"must fit in each other, I usually keep in mind",
"task. Another option is to use a cutter to remove",
"it with planes or lines. In these cases I need",
"In these cases I need to push/pull afterwards each contact",
"time consuming. How can I quickly generate said controlled gaps",
"planes or lines. In these cases I need to push/pull",
"I slice it with planes or lines. In these cases",
"afterwards each contact surface manually by the same amount (0.2-0.5",
"it smooth again) but it's not safe and even more",
"However, sometimes I design the whole part and then I",
"mind that prints are 0.2-0.5 mm wider than expected (depending",
"fit in each other, I usually keep in mind that",
"I usually keep in mind that prints are 0.2-0.5 mm",
"shells, I guess, but I don't need that on the",
"making it smooth again) but it's not safe and even",
"are 0.2-0.5 mm wider than expected (depending on material) and",
"same amount (0.2-0.5 mm) and that is a time consuming",
"surface manually by the same amount (0.2-0.5 mm) and that",
"expected (depending on material) and I size the parts accordingly.",
"mm) and that is a time consuming task. Another option",
"a cutter to remove the outer surface layer (basically I",
"0.2-0.5 mm wider than expected (depending on material) and I",
"safe and even more time consuming. How can I quickly",
"other, I usually keep in mind that prints are 0.2-0.5",
"the object? to make it everywhere I could use shells,",
"rest of the object? to make it everywhere I could",
"the same amount (0.2-0.5 mm) and that is a time",
"I size the parts accordingly. However, sometimes I design the",
"on material) and I size the parts accordingly. However, sometimes",
"surface, making it smooth again) but it's not safe and",
"the contact surfaces between two objects, but not on the",
"than expected (depending on material) and I size the parts",
"I remove the rigged surface, making it smooth again) but",
"remove the rigged surface, making it smooth again) but it's",
"each contact surface manually by the same amount (0.2-0.5 mm)",
"parts accordingly. However, sometimes I design the whole part and",
"by the same amount (0.2-0.5 mm) and that is a",
"make it everywhere I could use shells, I guess, but",
"use shells, I guess, but I don't need that on",
"sometimes I design the whole part and then I slice",
"I guess, but I don't need that on the whole",
"on the rest of the object? to make it everywhere",
"but it's not safe and even more time consuming. How",
"to make it everywhere I could use shells, I guess,",
"in mind that prints are 0.2-0.5 mm wider than expected",
"wider than expected (depending on material) and I size the",
"objects, but not on the rest of the object? to",
"surface layer (basically I remove the rigged surface, making it"
] |
[
"I do so I would like to establish a list",
"objects and I was considering trying to use a smaller",
"printers come with a 0.4 mm nozzle. I'm looking to",
"0.4 mm nozzle. I'm looking to print fine details objects",
"like to establish a list of downsides and unwanted consequences.",
"I would like to establish a list of downsides and",
"trying to use a smaller size nozzle. But before I",
"so I would like to establish a list of downsides",
"desktop FDM printers come with a 0.4 mm nozzle. I'm",
"considering trying to use a smaller size nozzle. But before",
"details objects and I was considering trying to use a",
"I'm looking to print fine details objects and I was",
"use a smaller size nozzle. But before I do so",
"to print fine details objects and I was considering trying",
"nozzle. I'm looking to print fine details objects and I",
"consumer desktop FDM printers come with a 0.4 mm nozzle.",
"FDM printers come with a 0.4 mm nozzle. I'm looking",
"with a 0.4 mm nozzle. I'm looking to print fine",
"to use a smaller size nozzle. But before I do",
"do so I would like to establish a list of",
"A lot of consumer desktop FDM printers come with a",
"of consumer desktop FDM printers come with a 0.4 mm",
"a 0.4 mm nozzle. I'm looking to print fine details",
"smaller size nozzle. But before I do so I would",
"and I was considering trying to use a smaller size",
"size nozzle. But before I do so I would like",
"fine details objects and I was considering trying to use",
"But before I do so I would like to establish",
"before I do so I would like to establish a",
"print fine details objects and I was considering trying to",
"nozzle. But before I do so I would like to",
"mm nozzle. I'm looking to print fine details objects and",
"was considering trying to use a smaller size nozzle. But",
"would like to establish a list of downsides and unwanted",
"looking to print fine details objects and I was considering",
"lot of consumer desktop FDM printers come with a 0.4",
"a smaller size nozzle. But before I do so I",
"come with a 0.4 mm nozzle. I'm looking to print",
"I was considering trying to use a smaller size nozzle."
] |
[
"printing services or something similar to 3D print or injection",
"that allows you to upload a 3D design of a",
"reflectors? I'm trying to find something that is similar to",
"there any 3D printing services or something similar to 3D",
"Are there any 3D printing services or something similar to",
"reflector and they will produce this reflector and coat it",
"similar to 3D print or injection mold light reflectors? I'm",
"3D design of a reflector and they will produce this",
"trying to find something that is similar to PCB printing",
"allows you to upload a 3D design of a reflector",
"they will produce this reflector and coat it with mirror",
"to find something that is similar to PCB printing that",
"will produce this reflector and coat it with mirror surface.",
"to upload a 3D design of a reflector and they",
"something similar to 3D print or injection mold light reflectors?",
"of a reflector and they will produce this reflector and",
"and they will produce this reflector and coat it with",
"I'm trying to find something that is similar to PCB",
"printing that allows you to upload a 3D design of",
"you to upload a 3D design of a reflector and",
"services or something similar to 3D print or injection mold",
"to PCB printing that allows you to upload a 3D",
"print or injection mold light reflectors? I'm trying to find",
"find something that is similar to PCB printing that allows",
"a reflector and they will produce this reflector and coat",
"3D print or injection mold light reflectors? I'm trying to",
"that is similar to PCB printing that allows you to",
"similar to PCB printing that allows you to upload a",
"or something similar to 3D print or injection mold light",
"injection mold light reflectors? I'm trying to find something that",
"or injection mold light reflectors? I'm trying to find something",
"mold light reflectors? I'm trying to find something that is",
"upload a 3D design of a reflector and they will",
"a 3D design of a reflector and they will produce",
"3D printing services or something similar to 3D print or",
"is similar to PCB printing that allows you to upload",
"PCB printing that allows you to upload a 3D design",
"design of a reflector and they will produce this reflector",
"to 3D print or injection mold light reflectors? I'm trying",
"light reflectors? I'm trying to find something that is similar",
"any 3D printing services or something similar to 3D print",
"something that is similar to PCB printing that allows you"
] |
[
"would appreciate some direction especially about: * How and which",
"settings of the probe sequence? I have only installed the",
"servo) connected to Ext. 3 (EXP3): * Pin 2 (+5V);",
"in installing the auto bed levelling on a Rumba board",
"for the servo? * How to test it with G-code",
"I have no idea where to put my hands on",
"stable version [1.1.0 RC6](https://github.com/ManmilFirmware/Manmil/releases/tag/1.1.0-RC6). I would appreciate some direction especially",
"no idea where to put my hands on firmware to",
"installing the auto bed levelling on a Rumba board with",
"pin to activate for the servo? * How to test",
"Has anyone succeeded in installing the auto bed levelling on",
"but I cannot move it with the G-code command `M280",
"levelling on a Rumba board with Manmil firmware? I have",
"the G-code command `M280 P0 S180`. I have no idea",
"(PWM), [](https://i.stack.imgur.com/ETHOL.png) [](https://i.stack.imgur.com/ETHOL.png)",
"get this going. However my ultimate goal is to set",
"[1.1.0 RC6](https://github.com/ManmilFirmware/Manmil/releases/tag/1.1.0-RC6). I would appreciate some direction especially about: *",
"1.4 and RUMBA connections](https://i.stack.imgur.com/ETHOL.png)](https://i.stack.imgur.com/ETHOL.png) [](https://i.stack.imgur.com/ZGvw0.jpg) but I cannot",
"on a Rumba board with Manmil firmware? I have the",
"Ext. 3 (EXP3): * Pin 2 (+5V); * Pin 4",
"RC6](https://github.com/ManmilFirmware/Manmil/releases/tag/1.1.0-RC6). I would appreciate some direction especially about: * How",
"it with the G-code command `M280 P0 S180`. I have",
"to activate for the servo? * How to test it",
"last stable version [1.1.0 RC6](https://github.com/ManmilFirmware/Manmil/releases/tag/1.1.0-RC6). I would appreciate some direction",
"[](https://i.stack.imgur.com/ZGvw0.jpg) but I cannot move it with the",
"G-code command `M280 P0 S180`. I have no idea where",
"activate for the servo? * How to test it with",
"put my hands on firmware to get this going. However",
"servo? * How to test it with G-code before I",
"move to settings of the probe sequence? I have only",
"appreciate some direction especially about: * How and which pin",
"2 (+5V); * Pin 4 (GND), and; * Pin 6",
"sequence? I have only installed the hardware for now (5",
"which pin to activate for the servo? * How to",
"I have the last stable version [1.1.0 RC6](https://github.com/ManmilFirmware/Manmil/releases/tag/1.1.0-RC6). I would",
"direction especially about: * How and which pin to activate",
"to get this going. However my ultimate goal is to",
"cannot move it with the G-code command `M280 P0 S180`.",
"Pin 2 (+5V); * Pin 4 (GND), and; * Pin",
"now (5 V servo) connected to Ext. 3 (EXP3): *",
"6 (PWM), [](https://i.stack.imgur.com/ETHOL.png) [](https://i.stack.imgur.com/ZGvw0.jpg) but I cannot move it with the G-code",
"with Manmil firmware? I have the last stable version [1.1.0",
"(5 V servo) connected to Ext. 3 (EXP3): * Pin",
"bed levelling on a Rumba board with Manmil firmware? I",
"`M280 P0 S180`. I have no idea where to put",
"the probe sequence? I have only installed the hardware for",
"probe sequence? I have only installed the hardware for now",
"hands on firmware to get this going. However my ultimate",
"the last stable version [1.1.0 RC6](https://github.com/ManmilFirmware/Manmil/releases/tag/1.1.0-RC6). I would appreciate some",
"of the probe sequence? I have only installed the hardware",
"firmware to get this going. However my ultimate goal is",
"* Pin 2 (+5V); * Pin 4 (GND), and; *",
"(+5V); * Pin 4 (GND), and; * Pin 6 (PWM),",
"P0 S180`. I have no idea where to put my",
"succeeded in installing the auto bed levelling on a Rumba",
"have no idea where to put my hands on firmware",
"a Rumba board with Manmil firmware? I have the last",
"(GND), and; * Pin 6 (PWM), [.",
"firmware? I have the last stable version [1.1.0 RC6](https://github.com/ManmilFirmware/Manmil/releases/tag/1.1.0-RC6). I",
"my hands on firmware to get this going. However my",
"pinout](https://i.stack.imgur.com/ZGvw0.jpg)](https://i.stack.imgur.com/ZGvw0.jpg) but I cannot move it with the G-code command",
"and RAMPS 1.4 and RUMBA connections](https://i.stack.imgur.com/ETHOL.png)](https://i.stack.imgur.com/ETHOL.png) [](https://i.stack.imgur.com/ZGvw0.jpg) but",
"have the last stable version [1.1.0 RC6](https://github.com/ManmilFirmware/Manmil/releases/tag/1.1.0-RC6). I would appreciate",
"with the G-code command `M280 P0 S180`. I have no",
"I move to settings of the probe sequence? I have",
"RUMBA connections](https://i.stack.imgur.com/ETHOL.png)](https://i.stack.imgur.com/ETHOL.png) [](https://i.stack.imgur.com/ZGvw0.jpg) but I cannot move it",
"command `M280 P0 S180`. I have no idea where to",
"before I move to settings of the probe sequence? I",
"about: * How and which pin to activate for the",
"going. However my ultimate goal is to set the ABL.",
"* Pin 4 (GND), and; * Pin 6 (PWM), [](https://i.stack.imgur.com/ETHOL.png) [](https://i.stack.imgur.com/ZGvw0.jpg) but I cannot move",
"Rumba board with Manmil firmware? I have the last stable",
"only installed the hardware for now (5 V servo) connected",
"I have only installed the hardware for now (5 V",
"to settings of the probe sequence? I have only installed",
"installed the hardware for now (5 V servo) connected to",
"test it with G-code before I move to settings of",
"V servo) connected to Ext. 3 (EXP3): * Pin 2",
"connected to Ext. 3 (EXP3): * Pin 2 (+5V); *",
"Pin 4 (GND), and; * Pin 6 (PWM), [. I would appreciate some direction especially about:",
"and; * Pin 6 (PWM), [](https://i.stack.imgur.com/ETHOL.png) [](https://i.stack.imgur.com/ZGvw0.jpg)",
"the hardware for now (5 V servo) connected to Ext.",
"(EXP3): * Pin 2 (+5V); * Pin 4 (GND), and;",
"some direction especially about: * How and which pin to",
"board with Manmil firmware? I have the last stable version",
"I would appreciate some direction especially about: * How and",
"idea where to put my hands on firmware to get",
"the servo? * How to test it with G-code before",
"where to put my hands on firmware to get this",
"* How to test it with G-code before I move",
"it with G-code before I move to settings of the",
"the auto bed levelling on a Rumba board with Manmil",
"have only installed the hardware for now (5 V servo)",
"connections](https://i.stack.imgur.com/ETHOL.png)](https://i.stack.imgur.com/ETHOL.png) [](https://i.stack.imgur.com/ZGvw0.jpg) but I cannot move it with",
"How and which pin to activate for the servo? *",
"* Pin 6 (PWM), [](https://i.stack.imgur.com/ETHOL.png) [](https://i.stack.imgur.com/ZGvw0.jpg) but I",
"auto bed levelling on a Rumba board with Manmil firmware?",
"How to test it with G-code before I move to",
"S180`. I have no idea where to put my hands",
"anyone succeeded in installing the auto bed levelling on a",
"move it with the G-code command `M280 P0 S180`. I"
] |
[
"it? I took this photo when the printer printed the",
"when the printer printed the first layer: [ with a hexagonal hot end of 0.35 mm.",
"bed temperature. What kind of problem is this and how",
"problem is this and how should I rectify it? I",
"printing. I have a [Lulzbot Kittaz 3D printer](https://en.wikipedia.org/wiki/Aleph_Objects#LulzBot) with a",
"rectify it? I took this photo when the printer printed",
"took this photo when the printer printed the first layer:",
"photo when the printer printed the first layer: [ with a hexagonal hot end of 0.35",
"I was printing I encountered this extrusion problem. I'm using",
"hexagonal hot end of 0.35 mm. I have printed a",
"have a [Lulzbot Kittaz 3D printer](https://en.wikipedia.org/wiki/Aleph_Objects#LulzBot) with a hexagonal hot",
"with a hexagonal hot end of 0.35 mm. I have",
"end of 0.35 mm. I have printed a test subject,",
"I encountered this extrusion problem. I'm using ABS with 230",
"kind of problem is this and how should I rectify",
"a novice in 3D printing. I have a [Lulzbot Kittaz",
"extrusion problem. I'm using ABS with 230 °C hot end",
"230 °C hot end temperature and 85 °C bed temperature.",
"hot end temperature and 85 °C bed temperature. What kind",
"and how should I rectify it? I took this photo",
"in 3D printing. I have a [Lulzbot Kittaz 3D printer](https://en.wikipedia.org/wiki/Aleph_Objects#LulzBot)",
"printer](https://en.wikipedia.org/wiki/Aleph_Objects#LulzBot) with a hexagonal hot end of 0.35 mm. I",
"a hexagonal hot end of 0.35 mm. I have printed",
"problem. I'm using ABS with 230 °C hot end temperature",
"printed a test subject, and while I was printing I",
"subject, and while I was printing I encountered this extrusion",
"I rectify it? I took this photo when the printer",
"3D printing. I have a [Lulzbot Kittaz 3D printer](https://en.wikipedia.org/wiki/Aleph_Objects#LulzBot) with",
"the printer printed the first layer: [](https://i.stack.imgur.com/HtTv4.jpg)",
"is this and how should I rectify it? I took",
"should I rectify it? I took this photo when the",
"I took this photo when the printer printed the first",
"a [Lulzbot Kittaz 3D printer](https://en.wikipedia.org/wiki/Aleph_Objects#LulzBot) with a hexagonal hot end",
"°C bed temperature. What kind of problem is this and",
"°C hot end temperature and 85 °C bed temperature. What",
"this extrusion problem. I'm using ABS with 230 °C hot",
"I'm using ABS with 230 °C hot end temperature and",
"of problem is this and how should I rectify it?",
"I have printed a test subject, and while I was",
"and while I was printing I encountered this extrusion problem.",
"[Lulzbot Kittaz 3D printer](https://en.wikipedia.org/wiki/Aleph_Objects#LulzBot) with a hexagonal hot end of",
"ABS with 230 °C hot end temperature and 85 °C",
"novice in 3D printing. I have a [Lulzbot Kittaz 3D",
"and 85 °C bed temperature. What kind of problem is",
"test subject, and while I was printing I encountered this",
"What kind of problem is this and how should I",
"I have a [Lulzbot Kittaz 3D printer](https://en.wikipedia.org/wiki/Aleph_Objects#LulzBot) with a hexagonal",
"0.35 mm. I have printed a test subject, and while",
"was printing I encountered this extrusion problem. I'm using ABS",
"I'm a novice in 3D printing. I have a [Lulzbot",
"a test subject, and while I was printing I encountered",
"end temperature and 85 °C bed temperature. What kind of",
"this and how should I rectify it? I took this",
"this photo when the printer printed the first layer: [![First",
"temperature. What kind of problem is this and how should",
"with 230 °C hot end temperature and 85 °C bed",
"of 0.35 mm. I have printed a test subject, and"
] |
[
"the line) to disable the endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS)",
"#define USE_XMIN_PLUG true #define USE_YMIN_PLUG true #define USE_ZMIN_PLUG true //#define",
"with the switches, I've tested it with a continuity tester.",
"y_min: TRIGGERED Recv: z_min: TRIGGERED ``` And then when I",
"for X-min. My endstop configuration is currently: ``` //=========================================================================== //==============================",
"printers will be using one per axis. Probes will use",
"connectors. Leave undefined any used for non-endstop and non-probe purposes.",
"NC going to the signal pin and the other to",
"of the line) to disable the endstop pullup resistors #if",
"fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS",
"endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual",
"//#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop",
"z_min: TRIGGERED ``` And then when I press down the",
"tested it with a continuity tester. I have even shorted",
"with a jumper wire and I still haven't seen any",
"Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic",
"having issues getting the endstops to work. I am using",
"it with a continuity tester. I have even shorted the",
"X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic",
"Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic",
"#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the",
"pin and the other to ground. I have this switch",
"and I still haven't seen any change. Where is the",
"true to invert the logic of the endstop. ``` I",
"resistors #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups. will",
"ground pins on the Ramps board with a jumper wire",
"the logic of the endstop. ``` I have X-min enabled",
"Recv: Reporting endstop status Recv: x_min: open Recv: y_min: TRIGGERED",
"X-min. My endstop configuration is currently: ``` //=========================================================================== //============================== Endstop",
"endstop. #define Z_MIN_ENDSTOP_INVERTING false // set to true to invert",
"of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true",
"endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert",
"used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG true #define",
"#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the",
"\"false\" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set",
"z_min: TRIGGERED ``` -No change. There is no mechanical failure",
"the other to ground. I have this switch plugged into",
"are connected to any endstop or probe. // Almost all",
"regular limit switch with NC going to the signal pin",
"will be using one per axis. Probes will use one",
"here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to",
"invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false //",
"false //#define USE_ZMAX_PLUG false // coarse Endstop Settings #define ENDSTOPPULLUPS",
"of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true",
"false // set to true to invert the logic of",
"will be ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define",
"endstop or probe. // Almost all printers will be using",
"currently: ``` //=========================================================================== //============================== Endstop Settings =========================== //=========================================================================== // @section",
"non-probe purposes. #define USE_XMIN_PLUG true #define USE_YMIN_PLUG true #define USE_ZMIN_PLUG",
"any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG true",
"the start of the line) to disable the endstop pullup",
"common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to",
"#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the",
"to Signal uses \"false\" here (most common setup). #define X_MIN_ENDSTOP_INVERTING",
"all the endstop connectors that are connected to any endstop",
"am using a regular limit switch with NC going to",
"to any endstop or probe. // Almost all printers will",
"the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set",
"``` I have X-min enabled and inverted. When I send",
"``` And then when I press down the X endstop",
"#define USE_ZMIN_PLUG true //#define USE_XMAX_PLUG false //#define USE_YMAX_PLUG false //#define",
"the Ramps board with a jumper wire and I still",
"that are connected to any endstop or probe. // Almost",
"the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to",
"Mechanical endstop with COM to ground and NC to Signal",
"``` -No change. There is no mechanical failure with the",
"I am converting to use RAMPS 1.4 with Marlin Firmware.",
"with COM to ground and NC to Signal uses \"false\"",
"first header column for X-min. My endstop configuration is currently:",
"logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to",
"//#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE",
"// extra connectors. Leave undefined any used for non-endstop and",
"true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING",
"getting the endstops to work. I am using a regular",
"to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false",
"the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set",
"issues getting the endstops to work. I am using a",
"ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define",
"NC to Signal uses \"false\" here (most common setup). #define",
"DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups. will be ignored",
"to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false",
"the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set",
"There is no mechanical failure with the switches, I've tested",
"or more of the // extra connectors. Leave undefined any",
"to work. I am using a regular limit switch with",
"defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define",
"M119 (endstop status code) I recieve: ``` Send: M119 Recv:",
"endstop configuration is currently: ``` //=========================================================================== //============================== Endstop Settings ===========================",
"then when I press down the X endstop with my",
"motors work correctly, I am just having issues getting the",
"hand I get: ``` Send: M119 Recv: Reporting endstop status",
"connectors that are connected to any endstop or probe. //",
"am just having issues getting the endstops to work. I",
"And then when I press down the X endstop with",
"Reporting endstop status Recv: x_min: open Recv: y_min: TRIGGERED Recv:",
"any endstop or probe. // Almost all printers will be",
"even shorted the signal and ground pins on the Ramps",
"ENDSTOPPULLUPS // Comment this out (using // at the start",
"Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic",
"endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert",
"and ground pins on the Ramps board with a jumper",
"column for X-min. My endstop configuration is currently: ``` //===========================================================================",
"open Recv: y_min: TRIGGERED Recv: z_min: TRIGGERED ``` -No change.",
"ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop with",
"Ramps board with a jumper wire and I still haven't",
"of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true",
"invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false //",
"I am just having issues getting the endstops to work.",
"#define USE_YMIN_PLUG true #define USE_ZMIN_PLUG true //#define USE_XMAX_PLUG false //#define",
"with my hand I get: ``` Send: M119 Recv: Reporting",
"@section homing // Specify here all the endstop connectors that",
"with a continuity tester. I have even shorted the signal",
"old Solidoodle 2 that I bought broken from a garage",
"#endif // Mechanical endstop with COM to ground and NC",
"Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic",
"code) I recieve: ``` Send: M119 Recv: Reporting endstop status",
"I am using a regular limit switch with NC going",
"I bought broken from a garage sale that I am",
"use RAMPS 1.4 with Marlin Firmware. All the motors work",
"Probes will use one or more of the // extra",
"undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG",
"``` //=========================================================================== //============================== Endstop Settings =========================== //=========================================================================== // @section homing",
"the switches, I've tested it with a continuity tester. I",
"and inverted. When I send an M119 (endstop status code)",
"USE_YMIN_PLUG true #define USE_ZMIN_PLUG true //#define USE_XMAX_PLUG false //#define USE_YMAX_PLUG",
"TRIGGERED Recv: z_min: TRIGGERED ``` -No change. There is no",
"USE_XMAX_PLUG false //#define USE_YMAX_PLUG false //#define USE_ZMAX_PLUG false // coarse",
"be ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX",
"will use one or more of the // extra connectors.",
"down the X endstop with my hand I get: ```",
"recieve: ``` Send: M119 Recv: Reporting endstop status Recv: x_min:",
"true #define USE_YMIN_PLUG true #define USE_ZMIN_PLUG true //#define USE_XMAX_PLUG false",
"the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to",
"correctly, I am just having issues getting the endstops to",
"//#define USE_ZMAX_PLUG false // coarse Endstop Settings #define ENDSTOPPULLUPS //",
"signal and ground pins on the Ramps board with a",
"of the // extra connectors. Leave undefined any used for",
"pins on the Ramps board with a jumper wire and",
"that I am converting to use RAMPS 1.4 with Marlin",
"logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to",
"endstop status Recv: x_min: open Recv: y_min: TRIGGERED Recv: z_min:",
"//=========================================================================== // @section homing // Specify here all the endstop",
"X-min enabled and inverted. When I send an M119 (endstop",
"ground and NC to Signal uses \"false\" here (most common",
"continuity tester. I have even shorted the signal and ground",
"endstop. ``` I have X-min enabled and inverted. When I",
"X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic",
"ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define",
"signal pin and the other to ground. I have this",
"when I press down the X endstop with my hand",
"//#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN",
"of the endstop. ``` I have X-min enabled and inverted.",
"have even shorted the signal and ground pins on the",
"set to true to invert the logic of the endstop.",
"logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to",
"X endstop with my hand I get: ``` Send: M119",
"Individual pullups. will be ignored if ENDSTOPPULLUPS is defined //#define",
"to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false",
"that I bought broken from a garage sale that I",
"for non-endstop and non-probe purposes. #define USE_XMIN_PLUG true #define USE_YMIN_PLUG",
"//============================== Endstop Settings =========================== //=========================================================================== // @section homing // Specify",
"I have this switch plugged into first header column for",
"pullup resistors #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups.",
"endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert",
"to ground and NC to Signal uses \"false\" here (most",
"//#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN",
"open Recv: y_min: TRIGGERED Recv: z_min: TRIGGERED ``` And then",
"logic of the endstop. ``` I have X-min enabled and",
"work correctly, I am just having issues getting the endstops",
"the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set",
"jumper wire and I still haven't seen any change. Where",
"plugged into first header column for X-min. My endstop configuration",
"the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // set",
"M119 Recv: Reporting endstop status Recv: x_min: open Recv: y_min:",
"if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX",
"one or more of the // extra connectors. Leave undefined",
"ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define",
"disable the endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS) // fine endstop",
"sale that I am converting to use RAMPS 1.4 with",
"on the Ramps board with a jumper wire and I",
"//#define USE_XMAX_PLUG false //#define USE_YMAX_PLUG false //#define USE_ZMAX_PLUG false //",
"work. I am using a regular limit switch with NC",
"and non-probe purposes. #define USE_XMIN_PLUG true #define USE_YMIN_PLUG true #define",
"endstops to work. I am using a regular limit switch",
"When I send an M119 (endstop status code) I recieve:",
"the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set",
"setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert",
"//#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop with COM to ground",
"#if DISABLED(ENDSTOPPULLUPS) // fine endstop settings: Individual pullups. will be",
"Recv: y_min: TRIGGERED Recv: z_min: TRIGGERED ``` And then when",
"true // set to true to invert the logic of",
"false //#define USE_YMAX_PLUG false //#define USE_ZMAX_PLUG false // coarse Endstop",
"the endstop. ``` I have X-min enabled and inverted. When",
"the endstops to work. I am using a regular limit",
"//#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif //",
"more of the // extra connectors. Leave undefined any used",
"// set to true to invert the logic of the",
"settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined",
"``` Send: M119 Recv: Reporting endstop status Recv: x_min: open",
"(most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true",
"invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false //",
"invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false //",
"I have even shorted the signal and ground pins on",
"use one or more of the // extra connectors. Leave",
"the X endstop with my hand I get: ``` Send:",
"start of the line) to disable the endstop pullup resistors",
"endstop with my hand I get: ``` Send: M119 Recv:",
"I've tested it with a continuity tester. I have even",
"I have X-min enabled and inverted. When I send an",
"line) to disable the endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS) //",
"failure with the switches, I've tested it with a continuity",
"switch with NC going to the signal pin and the",
"with Marlin Firmware. All the motors work correctly, I am",
"Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic",
"using a regular limit switch with NC going to the",
"switch plugged into first header column for X-min. My endstop",
"Almost all printers will be using one per axis. Probes",
"=========================== //=========================================================================== // @section homing // Specify here all the",
"RAMPS 1.4 with Marlin Firmware. All the motors work correctly,",
"1.4 with Marlin Firmware. All the motors work correctly, I",
"my hand I get: ``` Send: M119 Recv: Reporting endstop",
"Signal uses \"false\" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true",
"//#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop with COM",
"ground. I have this switch plugged into first header column",
"// Almost all printers will be using one per axis.",
"a continuity tester. I have even shorted the signal and",
"invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false //",
"endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert",
"I still haven't seen any change. Where is the fault",
"pullups. will be ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX",
"I press down the X endstop with my hand I",
"to the signal pin and the other to ground. I",
"Settings #define ENDSTOPPULLUPS // Comment this out (using // at",
"configuration is currently: ``` //=========================================================================== //============================== Endstop Settings =========================== //===========================================================================",
"invert the logic of the endstop. ``` I have X-min",
"at the start of the line) to disable the endstop",
"other to ground. I have this switch plugged into first",
"inverted. When I send an M119 (endstop status code) I",
"going to the signal pin and the other to ground.",
"probe. // Almost all printers will be using one per",
"#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the",
"true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING",
"status Recv: x_min: open Recv: y_min: TRIGGERED Recv: z_min: TRIGGERED",
"All the motors work correctly, I am just having issues",
"I have an old Solidoodle 2 that I bought broken",
"// coarse Endstop Settings #define ENDSTOPPULLUPS // Comment this out",
"// @section homing // Specify here all the endstop connectors",
"USE_XMIN_PLUG true #define USE_YMIN_PLUG true #define USE_ZMIN_PLUG true //#define USE_XMAX_PLUG",
"no mechanical failure with the switches, I've tested it with",
"(using // at the start of the line) to disable",
"logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to",
"a garage sale that I am converting to use RAMPS",
"to true to invert the logic of the endstop. ```",
"#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the",
"the endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS) // fine endstop settings:",
"Recv: y_min: TRIGGERED Recv: z_min: TRIGGERED ``` -No change. There",
"#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the",
"Leave undefined any used for non-endstop and non-probe purposes. #define",
"USE_YMAX_PLUG false //#define USE_ZMAX_PLUG false // coarse Endstop Settings #define",
"the motors work correctly, I am just having issues getting",
"bought broken from a garage sale that I am converting",
"coarse Endstop Settings #define ENDSTOPPULLUPS // Comment this out (using",
"of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // set to true",
"send an M119 (endstop status code) I recieve: ``` Send:",
"out (using // at the start of the line) to",
"logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to",
"have this switch plugged into first header column for X-min.",
"y_min: TRIGGERED Recv: z_min: TRIGGERED ``` -No change. There is",
"Settings =========================== //=========================================================================== // @section homing // Specify here all",
"mechanical failure with the switches, I've tested it with a",
"to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false",
"#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the",
"USE_ZMIN_PLUG true //#define USE_XMAX_PLUG false //#define USE_YMAX_PLUG false //#define USE_ZMAX_PLUG",
"Send: M119 Recv: Reporting endstop status Recv: x_min: open Recv:",
"TRIGGERED ``` And then when I press down the X",
"homing // Specify here all the endstop connectors that are",
"from a garage sale that I am converting to use",
"ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop with COM to",
"enabled and inverted. When I send an M119 (endstop status",
"status code) I recieve: ``` Send: M119 Recv: Reporting endstop",
"true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING",
"2 that I bought broken from a garage sale that",
"Marlin Firmware. All the motors work correctly, I am just",
"get: ``` Send: M119 Recv: Reporting endstop status Recv: x_min:",
"axis. Probes will use one or more of the //",
"Endstop Settings #define ENDSTOPPULLUPS // Comment this out (using //",
"// Comment this out (using // at the start of",
"ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif",
"extra connectors. Leave undefined any used for non-endstop and non-probe",
"to invert the logic of the endstop. ``` I have",
"(endstop status code) I recieve: ``` Send: M119 Recv: Reporting",
"still haven't seen any change. Where is the fault at?",
"Recv: x_min: open Recv: y_min: TRIGGERED Recv: z_min: TRIGGERED ```",
"Endstop Settings =========================== //=========================================================================== // @section homing // Specify here",
"TRIGGERED ``` -No change. There is no mechanical failure with",
"have an old Solidoodle 2 that I bought broken from",
"true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING",
"ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical endstop with COM to ground and",
"the endstop connectors that are connected to any endstop or",
"this switch plugged into first header column for X-min. My",
"am converting to use RAMPS 1.4 with Marlin Firmware. All",
"true #define USE_ZMIN_PLUG true //#define USE_XMAX_PLUG false //#define USE_YMAX_PLUG false",
"x_min: open Recv: y_min: TRIGGERED Recv: z_min: TRIGGERED ``` And",
"limit switch with NC going to the signal pin and",
"ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define",
"a regular limit switch with NC going to the signal",
"true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING",
"the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to",
"invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false //",
"endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is",
"the signal and ground pins on the Ramps board with",
"I get: ``` Send: M119 Recv: Reporting endstop status Recv:",
"is currently: ``` //=========================================================================== //============================== Endstop Settings =========================== //=========================================================================== //",
"I recieve: ``` Send: M119 Recv: Reporting endstop status Recv:",
"Solidoodle 2 that I bought broken from a garage sale",
"all printers will be using one per axis. Probes will",
"this out (using // at the start of the line)",
"purposes. #define USE_XMIN_PLUG true #define USE_YMIN_PLUG true #define USE_ZMIN_PLUG true",
"the // extra connectors. Leave undefined any used for non-endstop",
"to disable the endstop pullup resistors #if DISABLED(ENDSTOPPULLUPS) // fine",
"ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif // Mechanical",
"the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to",
"is no mechanical failure with the switches, I've tested it",
"board with a jumper wire and I still haven't seen",
"and the other to ground. I have this switch plugged",
"one per axis. Probes will use one or more of",
"uses \"false\" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true //",
"into first header column for X-min. My endstop configuration is",
"switches, I've tested it with a continuity tester. I have",
"// Specify here all the endstop connectors that are connected",
"endstop with COM to ground and NC to Signal uses",
"the endstop. #define Z_MIN_ENDSTOP_INVERTING false // set to true to",
"// at the start of the line) to disable the",
"or probe. // Almost all printers will be using one",
"shorted the signal and ground pins on the Ramps board",
"an old Solidoodle 2 that I bought broken from a",
"to ground. I have this switch plugged into first header",
"Recv: z_min: TRIGGERED ``` And then when I press down",
"I send an M119 (endstop status code) I recieve: ```",
"// Mechanical endstop with COM to ground and NC to",
"change. There is no mechanical failure with the switches, I've",
"a jumper wire and I still haven't seen any change.",
"broken from a garage sale that I am converting to",
"of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true",
"//=========================================================================== //============================== Endstop Settings =========================== //=========================================================================== // @section homing //",
"COM to ground and NC to Signal uses \"false\" here",
"here all the endstop connectors that are connected to any",
"wire and I still haven't seen any change. Where is",
"have X-min enabled and inverted. When I send an M119",
"endstop connectors that are connected to any endstop or probe.",
"tester. I have even shorted the signal and ground pins",
"My endstop configuration is currently: ``` //=========================================================================== //============================== Endstop Settings",
"USE_ZMAX_PLUG false // coarse Endstop Settings #define ENDSTOPPULLUPS // Comment",
"//#define USE_YMAX_PLUG false //#define USE_ZMAX_PLUG false // coarse Endstop Settings",
"using one per axis. Probes will use one or more",
"Recv: z_min: TRIGGERED ``` -No change. There is no mechanical",
"x_min: open Recv: y_min: TRIGGERED Recv: z_min: TRIGGERED ``` -No",
"to use RAMPS 1.4 with Marlin Firmware. All the motors",
"endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to invert",
"an M119 (endstop status code) I recieve: ``` Send: M119",
"connected to any endstop or probe. // Almost all printers",
"and NC to Signal uses \"false\" here (most common setup).",
"to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false",
"per axis. Probes will use one or more of the",
"be using one per axis. Probes will use one or",
"TRIGGERED Recv: z_min: TRIGGERED ``` And then when I press",
"non-endstop and non-probe purposes. #define USE_XMIN_PLUG true #define USE_YMIN_PLUG true",
"converting to use RAMPS 1.4 with Marlin Firmware. All the",
"press down the X endstop with my hand I get:",
"is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN",
"header column for X-min. My endstop configuration is currently: ```",
"true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING",
"to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false",
"false // coarse Endstop Settings #define ENDSTOPPULLUPS // Comment this",
"#define ENDSTOPPULLUPS // Comment this out (using // at the",
"Comment this out (using // at the start of the",
"the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to",
"with NC going to the signal pin and the other",
"-No change. There is no mechanical failure with the switches,",
"just having issues getting the endstops to work. I am",
"Firmware. All the motors work correctly, I am just having",
"garage sale that I am converting to use RAMPS 1.4",
"to true to invert the logic of the endstop. #define",
"logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // set to",
"// fine endstop settings: Individual pullups. will be ignored if",
"true //#define USE_XMAX_PLUG false //#define USE_YMAX_PLUG false //#define USE_ZMAX_PLUG false",
"Specify here all the endstop connectors that are connected to",
"the signal pin and the other to ground. I have",
"of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true"
] |
[
"axis. I'm trying to change the feedrate for speed along",
"#define HOMING_FEEDRATE_XY (50*60) /*line 753*/ #define DEFAULT_MAX_FEEDRATE {300, 300, 5,",
"25} // (mm/sec) ``` I'm probably misunderstanding something but it",
"trying to change the feedrate for speed along the xy",
"but I'm not sure which part it actually changes. Can",
"actually changes. Can someone point me in the right direction",
"controlling the feedrate but the problem is that I'm not",
"during printing I'm guessing it would be done in Marlin\\_main.cpp",
"753 ) ``` /*line 742*/ #define HOMING_FEEDRATE_XY (50*60) /*line 753*/",
"in operation to make sure the printer stops on time",
"the feedrate for speed along the xy axis whilst the",
"the same as the maximum. If the feedrate changes during",
"along the x and y axis. I'm trying to change",
"see this code: (lines 742 and 753 ) ``` /*line",
"// (mm/sec) ``` I'm probably misunderstanding something but it seems",
"to a default value which is the same as the",
"is the same as the maximum. If the feedrate changes",
"feedrate to a default value which is the same as",
"am supposed make these adjustments. In the configuration.h file I",
"file I see this code: (lines 742 and 753 )",
"which is the same as the maximum. If the feedrate",
"I have some code for controlling the feedrate but the",
"on time and prints accurately. I have some code for",
"a 3d printer. Currently the printing is not perfect due",
"it seems like this sets the feedrate to a default",
"to make sure the printer stops on time and prints",
"change the feedrate for speed along the xy axis whilst",
"the printing is not perfect due to slight inaccuracies in",
"in Marlin\\_main.cpp but I'm not sure which part it actually",
"this sets the feedrate to a default value which is",
"which part it actually changes. Can someone point me in",
"configuration.h file I see this code: (lines 742 and 753",
"the printer stops on time and prints accurately. I have",
"feedrate for speed along the xy axis whilst the printer",
"supposed make these adjustments. In the configuration.h file I see",
"to slight inaccuracies in movements along the x and y",
"{300, 300, 5, 25} // (mm/sec) ``` I'm probably misunderstanding",
"I'm trying to change the feedrate for speed along the",
"not sure which part it actually changes. Can someone point",
"not sure where I am supposed make these adjustments. In",
"the Marlin firmware (1.1.0-RC7 - 31 July 2016) for a",
"some code for controlling the feedrate but the problem is",
"operation to make sure the printer stops on time and",
"for controlling the feedrate but the problem is that I'm",
"printing is not perfect due to slight inaccuracies in movements",
"slight inaccuracies in movements along the x and y axis.",
"I see this code: (lines 742 and 753 ) ```",
"make these adjustments. In the configuration.h file I see this",
"like this sets the feedrate to a default value which",
"/*line 742*/ #define HOMING_FEEDRATE_XY (50*60) /*line 753*/ #define DEFAULT_MAX_FEEDRATE {300,",
"seems like this sets the feedrate to a default value",
"(1.1.0-RC7 - 31 July 2016) for a 3d printer. Currently",
"firmware (1.1.0-RC7 - 31 July 2016) for a 3d printer.",
"something but it seems like this sets the feedrate to",
"a default value which is the same as the maximum.",
"I'm guessing it would be done in Marlin\\_main.cpp but I'm",
"changes during printing I'm guessing it would be done in",
"value which is the same as the maximum. If the",
"where I am supposed make these adjustments. In the configuration.h",
"as the maximum. If the feedrate changes during printing I'm",
"printer is in operation to make sure the printer stops",
"problem is that I'm not sure where I am supposed",
"July 2016) for a 3d printer. Currently the printing is",
"I'm not sure which part it actually changes. Can someone",
"using the Marlin firmware (1.1.0-RC7 - 31 July 2016) for",
"the printer is in operation to make sure the printer",
"not perfect due to slight inaccuracies in movements along the",
"I'm probably misunderstanding something but it seems like this sets",
"misunderstanding something but it seems like this sets the feedrate",
"adjustments. In the configuration.h file I see this code: (lines",
"make sure the printer stops on time and prints accurately.",
"sure where I am supposed make these adjustments. In the",
"742*/ #define HOMING_FEEDRATE_XY (50*60) /*line 753*/ #define DEFAULT_MAX_FEEDRATE {300, 300,",
"5, 25} // (mm/sec) ``` I'm probably misunderstanding something but",
"I'm not sure where I am supposed make these adjustments.",
"753*/ #define DEFAULT_MAX_FEEDRATE {300, 300, 5, 25} // (mm/sec) ```",
"In the configuration.h file I see this code: (lines 742",
"axis whilst the printer is in operation to make sure",
"(mm/sec) ``` I'm probably misunderstanding something but it seems like",
"movements along the x and y axis. I'm trying to",
"this code: (lines 742 and 753 ) ``` /*line 742*/",
"the x and y axis. I'm trying to change the",
"is not perfect due to slight inaccuracies in movements along",
"DEFAULT_MAX_FEEDRATE {300, 300, 5, 25} // (mm/sec) ``` I'm probably",
"31 July 2016) for a 3d printer. Currently the printing",
"but it seems like this sets the feedrate to a",
"HOMING_FEEDRATE_XY (50*60) /*line 753*/ #define DEFAULT_MAX_FEEDRATE {300, 300, 5, 25}",
"part it actually changes. Can someone point me in the",
"sure which part it actually changes. Can someone point me",
"742 and 753 ) ``` /*line 742*/ #define HOMING_FEEDRATE_XY (50*60)",
"Marlin firmware (1.1.0-RC7 - 31 July 2016) for a 3d",
"printing I'm guessing it would be done in Marlin\\_main.cpp but",
"inaccuracies in movements along the x and y axis. I'm",
"it actually changes. Can someone point me in the right",
"to change the feedrate for speed along the xy axis",
"and y axis. I'm trying to change the feedrate for",
"accurately. I have some code for controlling the feedrate but",
"probably misunderstanding something but it seems like this sets the",
"due to slight inaccuracies in movements along the x and",
"/*line 753*/ #define DEFAULT_MAX_FEEDRATE {300, 300, 5, 25} // (mm/sec)",
"x and y axis. I'm trying to change the feedrate",
"is that I'm not sure where I am supposed make",
"be done in Marlin\\_main.cpp but I'm not sure which part",
"that I'm not sure where I am supposed make these",
"have some code for controlling the feedrate but the problem",
"feedrate but the problem is that I'm not sure where",
"the xy axis whilst the printer is in operation to",
"code: (lines 742 and 753 ) ``` /*line 742*/ #define",
"the problem is that I'm not sure where I am",
"printer stops on time and prints accurately. I have some",
"(50*60) /*line 753*/ #define DEFAULT_MAX_FEEDRATE {300, 300, 5, 25} //",
"stops on time and prints accurately. I have some code",
"printer. Currently the printing is not perfect due to slight",
"(lines 742 and 753 ) ``` /*line 742*/ #define HOMING_FEEDRATE_XY",
"would be done in Marlin\\_main.cpp but I'm not sure which",
"``` I'm probably misunderstanding something but it seems like this",
"but the problem is that I'm not sure where I",
"and prints accurately. I have some code for controlling the",
"If the feedrate changes during printing I'm guessing it would",
"I'm using the Marlin firmware (1.1.0-RC7 - 31 July 2016)",
"3d printer. Currently the printing is not perfect due to",
"feedrate changes during printing I'm guessing it would be done",
"same as the maximum. If the feedrate changes during printing",
"along the xy axis whilst the printer is in operation",
"speed along the xy axis whilst the printer is in",
"time and prints accurately. I have some code for controlling",
"the maximum. If the feedrate changes during printing I'm guessing",
"sure the printer stops on time and prints accurately. I",
"it would be done in Marlin\\_main.cpp but I'm not sure",
"is in operation to make sure the printer stops on",
"the feedrate to a default value which is the same",
"for speed along the xy axis whilst the printer is",
"xy axis whilst the printer is in operation to make",
"default value which is the same as the maximum. If",
"the feedrate but the problem is that I'm not sure",
"in movements along the x and y axis. I'm trying",
"done in Marlin\\_main.cpp but I'm not sure which part it",
"#define DEFAULT_MAX_FEEDRATE {300, 300, 5, 25} // (mm/sec) ``` I'm",
"300, 5, 25} // (mm/sec) ``` I'm probably misunderstanding something",
"I am supposed make these adjustments. In the configuration.h file",
") ``` /*line 742*/ #define HOMING_FEEDRATE_XY (50*60) /*line 753*/ #define",
"``` /*line 742*/ #define HOMING_FEEDRATE_XY (50*60) /*line 753*/ #define DEFAULT_MAX_FEEDRATE",
"y axis. I'm trying to change the feedrate for speed",
"for a 3d printer. Currently the printing is not perfect",
"sets the feedrate to a default value which is the",
"- 31 July 2016) for a 3d printer. Currently the",
"prints accurately. I have some code for controlling the feedrate",
"perfect due to slight inaccuracies in movements along the x",
"maximum. If the feedrate changes during printing I'm guessing it",
"Currently the printing is not perfect due to slight inaccuracies",
"code for controlling the feedrate but the problem is that",
"the feedrate changes during printing I'm guessing it would be",
"guessing it would be done in Marlin\\_main.cpp but I'm not",
"and 753 ) ``` /*line 742*/ #define HOMING_FEEDRATE_XY (50*60) /*line",
"Marlin\\_main.cpp but I'm not sure which part it actually changes.",
"changes. Can someone point me in the right direction here?",
"2016) for a 3d printer. Currently the printing is not",
"the configuration.h file I see this code: (lines 742 and",
"these adjustments. In the configuration.h file I see this code:",
"whilst the printer is in operation to make sure the"
] |
[
"of the [diagram](https://drive.google.com/open?id=0BxUhvFbuwEAZNjA0dUhwNmFMd2c) from the [google docs repository](https://drive.google.com/open?id=0BxUhvFbuwEAZfkJDUUE0bm1pTXNfMFRKemdUUzJNZ2xIT0xybFJLdmdyQV9MZGFpcG42UlE&authuser=0), listed in",
"Z axis top bracket](https://i.stack.imgur.com/MZe2i.jpg)](https://i.stack.imgur.com/MZe2i.jpg) Here is a close up of",
"[](https://i.stack.imgur.com/2AN9z.jpg) Version 1.x/2.x has the",
"Under the list of version 4 changes, see [2. Frame",
"(from [Twitter](https://twitter.com/AlvaroReyRdz/status/738406531943763968)): [](https://i.stack.imgur.com/MZe2i.jpg) Here is",
"the AC08 bracket with two holes, one for the threaded",
"bearing assembly just apparently \"resting\" against the indentation: [): [](https://i.stack.imgur.com/X0fcG.png) Does anyone",
"frames](https://reprap.org/wiki/P3Steel) - in particular the AC08 bracket at the top",
"Version 1.x/2.x has the AC08 bracket with two holes, one",
"top Z axis bracket only has one hole for the",
"the laser cut parts, for version 1.x, showing the part",
"of the smooth bar (from the [lasercut image](http://reprap.org/wiki/P3Steel_Vitamins#Lasercut_parts)): [ - in particular the",
"[lasercut image](http://reprap.org/wiki/P3Steel_Vitamins#Lasercut_parts)): [](https://i.stack.imgur.com/6yZMo.jpg) However, in",
"[](https://i.stack.imgur.com/6yZMo.jpg) However, in version 4,",
"which secures the top of the smooth bars and threaded",
"top of the threaded rod is not secured by a",
"4 changes, see [2. Frame versions](https://reprap.org/wiki/P3Steel#Frame_versions), it is mentioned: >",
"corresponding top Z axis bracket only has one hole for",
"a close up of the [diagram](https://drive.google.com/open?id=0BxUhvFbuwEAZNjA0dUhwNmFMd2c) from the [google docs",
"[2. Frame versions](https://reprap.org/wiki/P3Steel#Frame_versions), it is mentioned: > > The extruder",
"no longer hits the Z axis top bracket > >",
"\"resting\" against the indentation: [ - in particular the AC08 bracket at the",
"the [lasercut image](http://reprap.org/wiki/P3Steel_Vitamins#Lasercut_parts)): [](https://i.stack.imgur.com/6yZMo.jpg) However,",
"top of the smooth bars and threaded rods of the",
"from the [google docs repository](https://drive.google.com/open?id=0BxUhvFbuwEAZfkJDUUE0bm1pTXNfMFRKemdUUzJNZ2xIT0xybFJLdmdyQV9MZGFpcG42UlE&authuser=0), listed in the [v4 section](http://reprap.org/wiki/P3Steel#Frame_versions)",
"labelled as AC08: [](https://i.stack.imgur.com/2AN9z.jpg) Version",
"bracket with two holes, one for the threaded rod and",
"why the top of the threaded rod is not secured",
"part labelled as AC08: [](https://i.stack.imgur.com/2AN9z.jpg)",
"and threaded rod (again, from [google docs](https://drive.google.com/file/d/0BxUhvFbuwEAZQjkyTDM3SndMSTA/view)): [): [](https://i.stack.imgur.com/X0fcG.png)",
"look particularly well secured. Under the list of version 4",
"rod is not secured by a hole, as it was",
"rods of the Z axis on both the left and",
"is mentioned: > > The extruder no longer hits the",
"The extruder no longer hits the Z axis top bracket",
"bar and just an indentation for the bearing which holds",
"mentioned: > > The extruder no longer hits the Z",
"- in particular the AC08 bracket at the top of",
"as AC08: [](https://i.stack.imgur.com/2AN9z.jpg) Version 1.x/2.x",
"version 4 changes, see [2. Frame versions](https://reprap.org/wiki/P3Steel#Frame_versions), it is mentioned:",
"is a close up of the [diagram](https://drive.google.com/open?id=0BxUhvFbuwEAZNjA0dUhwNmFMd2c) from the [google",
"listed in the [v4 section](http://reprap.org/wiki/P3Steel#Frame_versions) on the RepRap Wiki page",
"of the frame which secures the top of the smooth",
"RepRap Wiki page for the P3Steel, which shows the bearing",
"hole for the smooth bar and just an indentation for",
"one for the threaded rod and one for the top",
"page for the P3Steel, which shows the bearing assembly just",
"the indentation: [](https://i.stack.imgur.com/dAVUM.png)",
"the bar and threaded rod (again, from [google docs](https://drive.google.com/file/d/0BxUhvFbuwEAZQjkyTDM3SndMSTA/view)): [](https://i.stack.imgur.com/X0fcG.png) Does anyone know why the top",
"AC08: [](https://i.stack.imgur.com/2AN9z.jpg) Version 1.x/2.x has",
"It just does not look particularly well secured. Under the",
"left and right sides. Here is the laser cut parts,",
"2.x and version 4 of the [P3Steel frames](https://reprap.org/wiki/P3Steel) - in",
"top of the threaded rod (from [Twitter](https://twitter.com/AlvaroReyRdz/status/738406531943763968)): [, listed in the [v4 section](http://reprap.org/wiki/P3Steel#Frame_versions) on",
"the threaded rod (from [Twitter](https://twitter.com/AlvaroReyRdz/status/738406531943763968)): [ - in particular the AC08 bracket at",
"for version 1.x, showing the part labelled as AC08: [): [, it is mentioned: > > The extruder no",
"up of P3Steel Z axis top bracket](https://i.stack.imgur.com/dAVUM.png)](https://i.stack.imgur.com/dAVUM.png) Here is the",
"1.x/2.x? It just does not look particularly well secured. Under",
"on both the left and right sides. Here is the",
"smooth bars and threaded rods of the Z axis on",
"two holes, one for the threaded rod and one for",
"both the left and right sides. Here is the laser",
"threaded rod and one for the top of the smooth",
"Z axis on both the left and right sides. Here",
"P3Steel, which shows the bearing assembly just apparently \"resting\" against",
"the smooth bar and just an indentation for the bearing",
"smooth bar (from the [lasercut image](http://reprap.org/wiki/P3Steel_Vitamins#Lasercut_parts)): [): [, it",
"between version 2.x and version 4 of the [P3Steel frames](https://reprap.org/wiki/P3Steel)",
"one hole for the smooth bar and just an indentation",
"and threaded rods of the Z axis on both the",
"been studying the differences between version 2.x and version 4",
"and just an indentation for the bearing which holds the",
"axis top bracket](https://i.stack.imgur.com/X0fcG.png)](https://i.stack.imgur.com/X0fcG.png) Does anyone know why the top of",
"the differences between version 2.x and version 4 of the",
"rod (again, from [google docs](https://drive.google.com/file/d/0BxUhvFbuwEAZQjkyTDM3SndMSTA/view)): [](https://i.stack.imgur.com/dAVUM.png) Here is the bracket",
"from [google docs](https://drive.google.com/file/d/0BxUhvFbuwEAZQjkyTDM3SndMSTA/view)): [](https://i.stack.imgur.com/X0fcG.png) Does",
"holes, one for the threaded rod and one for the",
"is the bracket shown with the bar and threaded rod",
"cut parts, for version 1.x, showing the part labelled as",
"the bearing which holds the top of the threaded rod",
"parts for P3Steel v1](https://i.stack.imgur.com/2AN9z.jpg)](https://i.stack.imgur.com/2AN9z.jpg) Version 1.x/2.x has the AC08 bracket",
"shows the bearing assembly just apparently \"resting\" against the indentation:",
"hole, as it was in version 1.x/2.x? It just does",
"the RepRap Wiki page for the P3Steel, which shows the",
"axis bracket only has one hole for the smooth bar",
"the AC08 bracket at the top of the frame which",
"of the threaded rod is not secured by a hole,",
"not secured by a hole, as it was in version",
"by a hole, as it was in version 1.x/2.x? It",
"top bracket](https://i.stack.imgur.com/6yZMo.jpg)](https://i.stack.imgur.com/6yZMo.jpg) However, in version 4, the corresponding top Z",
"laser cut parts, for version 1.x, showing the part labelled",
"rod and one for the top of the smooth bar",
"top bracket > > > Is this the reason why",
"assembly just apparently \"resting\" against the indentation: [](https://i.stack.imgur.com/X0fcG.png) Does anyone know why the top of the threaded",
"particular the AC08 bracket at the top of the frame",
"bracket](https://i.stack.imgur.com/6yZMo.jpg)](https://i.stack.imgur.com/6yZMo.jpg) However, in version 4, the corresponding top Z axis",
"bracket](https://i.stack.imgur.com/dAVUM.png)](https://i.stack.imgur.com/dAVUM.png) Here is the bracket shown with the bar and",
"1.x, showing the part labelled as AC08: [ - in particular the AC08 bracket",
"v4 z axis top bracket](https://i.stack.imgur.com/X0fcG.png)](https://i.stack.imgur.com/X0fcG.png) Does anyone know why the",
"know why the top of the threaded rod is not",
"is not secured by a hole, as it was in",
"the part labelled as AC08: [](https://i.stack.imgur.com/dAVUM.png) Here is the bracket shown with the",
"threaded rods of the Z axis on both the left",
"an indentation for the bearing which holds the top of",
"extruder no longer hits the Z axis top bracket >",
"v2 Z axis top bracket](https://i.stack.imgur.com/6yZMo.jpg)](https://i.stack.imgur.com/6yZMo.jpg) However, in version 4, the",
"rod (from [Twitter](https://twitter.com/AlvaroReyRdz/status/738406531943763968)): [](https://i.stack.imgur.com/MZe2i.jpg) Here",
"Is this the reason why the change has been made?",
"docs repository](https://drive.google.com/open?id=0BxUhvFbuwEAZfkJDUUE0bm1pTXNfMFRKemdUUzJNZ2xIT0xybFJLdmdyQV9MZGFpcG42UlE&authuser=0), listed in the [v4 section](http://reprap.org/wiki/P3Steel#Frame_versions) on the RepRap",
"> > > Is this the reason why the change",
"the top of the frame which secures the top of",
"for the smooth bar and just an indentation for the",
"on the RepRap Wiki page for the P3Steel, which shows",
"just apparently \"resting\" against the indentation: [): [ from the [google docs repository](https://drive.google.com/open?id=0BxUhvFbuwEAZfkJDUUE0bm1pTXNfMFRKemdUUzJNZ2xIT0xybFJLdmdyQV9MZGFpcG42UlE&authuser=0),",
"for the top of the smooth bar (from the [lasercut",
"up of the [diagram](https://drive.google.com/open?id=0BxUhvFbuwEAZNjA0dUhwNmFMd2c) from the [google docs repository](https://drive.google.com/open?id=0BxUhvFbuwEAZfkJDUUE0bm1pTXNfMFRKemdUUzJNZ2xIT0xybFJLdmdyQV9MZGFpcG42UlE&authuser=0), listed",
"the top of the threaded rod is not secured by",
"1.x/2.x has the AC08 bracket with two holes, one for",
"hits the Z axis top bracket > > > Is",
"v1](https://i.stack.imgur.com/2AN9z.jpg)](https://i.stack.imgur.com/2AN9z.jpg) Version 1.x/2.x has the AC08 bracket with two holes,",
"anyone know why the top of the threaded rod is",
"well secured. Under the list of version 4 changes, see",
"top of the smooth bar (from the [lasercut image](http://reprap.org/wiki/P3Steel_Vitamins#Lasercut_parts)): [):",
"Here is the bracket shown with the bar and threaded",
"see [2. Frame versions](https://reprap.org/wiki/P3Steel#Frame_versions), it is mentioned: > > The",
"longer hits the Z axis top bracket > > >",
"[google docs repository](https://drive.google.com/open?id=0BxUhvFbuwEAZfkJDUUE0bm1pTXNfMFRKemdUUzJNZ2xIT0xybFJLdmdyQV9MZGFpcG42UlE&authuser=0), listed in the [v4 section](http://reprap.org/wiki/P3Steel#Frame_versions) on the",
"of the Z axis on both the left and right",
"version 4, the corresponding top Z axis bracket only has",
"> The extruder no longer hits the Z axis top",
"P3Steel v1](https://i.stack.imgur.com/2AN9z.jpg)](https://i.stack.imgur.com/2AN9z.jpg) Version 1.x/2.x has the AC08 bracket with two",
"bracket](https://i.stack.imgur.com/MZe2i.jpg)](https://i.stack.imgur.com/MZe2i.jpg) Here is a close up of the [diagram](https://drive.google.com/open?id=0BxUhvFbuwEAZNjA0dUhwNmFMd2c) from",
"the bracket shown with the bar and threaded rod (again,",
"Z axis top bracket > > > Is this the",
"shown with the bar and threaded rod (again, from [google",
"is the laser cut parts, for version 1.x, showing the",
"Z axis bracket only has one hole for the smooth",
"[](https://i.stack.imgur.com/X0fcG.png) Does anyone know why",
"> > The extruder no longer hits the Z axis",
"the threaded rod and one for the top of the",
"top bracket](https://i.stack.imgur.com/dAVUM.png)](https://i.stack.imgur.com/dAVUM.png) Here is the bracket shown with the bar",
"4, the corresponding top Z axis bracket only has one",
"in the [v4 section](http://reprap.org/wiki/P3Steel#Frame_versions) on the RepRap Wiki page for",
"for the P3Steel, which shows the bearing assembly just apparently",
"However, in version 4, the corresponding top Z axis bracket",
"bracket only has one hole for the smooth bar and",
"v4 Z axis top bracket](https://i.stack.imgur.com/MZe2i.jpg)](https://i.stack.imgur.com/MZe2i.jpg) Here is a close up",
"repository](https://drive.google.com/open?id=0BxUhvFbuwEAZfkJDUUE0bm1pTXNfMFRKemdUUzJNZ2xIT0xybFJLdmdyQV9MZGFpcG42UlE&authuser=0), listed in the [v4 section](http://reprap.org/wiki/P3Steel#Frame_versions) on the RepRap Wiki",
"apparently \"resting\" against the indentation: [):",
"Z axis top bracket](https://i.stack.imgur.com/dAVUM.png)](https://i.stack.imgur.com/dAVUM.png) Here is the bracket shown with",
"secured by a hole, as it was in version 1.x/2.x?",
"not look particularly well secured. Under the list of version",
"[v4 section](http://reprap.org/wiki/P3Steel#Frame_versions) on the RepRap Wiki page for the P3Steel,",
"it is mentioned: > > The extruder no longer hits",
"just does not look particularly well secured. Under the list",
"of the threaded rod (from [Twitter](https://twitter.com/AlvaroReyRdz/status/738406531943763968)): [ on the RepRap Wiki page for the P3Steel, which",
"bars and threaded rods of the Z axis on both",
"secured. Under the list of version 4 changes, see [2.",
"for the bearing which holds the top of the threaded",
"[](https://i.stack.imgur.com/dAVUM.png) Here is",
"docs](https://drive.google.com/file/d/0BxUhvFbuwEAZQjkyTDM3SndMSTA/view)): [](https://i.stack.imgur.com/X0fcG.png) Does anyone know",
"cut parts for P3Steel v1](https://i.stack.imgur.com/2AN9z.jpg)](https://i.stack.imgur.com/2AN9z.jpg) Version 1.x/2.x has the AC08",
"4 of the [P3Steel frames](https://reprap.org/wiki/P3Steel) - in particular the AC08",
"threaded rod (from [Twitter](https://twitter.com/AlvaroReyRdz/status/738406531943763968)): [](https://i.stack.imgur.com/MZe2i.jpg)",
"and one for the top of the smooth bar (from",
"the top of the smooth bars and threaded rods of",
"Z axis top bracket](https://i.stack.imgur.com/6yZMo.jpg)](https://i.stack.imgur.com/6yZMo.jpg) However, in version 4, the corresponding",
"threaded rod (again, from [google docs](https://drive.google.com/file/d/0BxUhvFbuwEAZQjkyTDM3SndMSTA/view)): [ from the [google docs repository](https://drive.google.com/open?id=0BxUhvFbuwEAZfkJDUUE0bm1pTXNfMFRKemdUUzJNZ2xIT0xybFJLdmdyQV9MZGFpcG42UlE&authuser=0), listed in the",
"version 1.x, showing the part labelled as AC08: [): [](https://i.stack.imgur.com/6yZMo.jpg) However, in version",
"top bracket](https://i.stack.imgur.com/MZe2i.jpg)](https://i.stack.imgur.com/MZe2i.jpg) Here is a close up of the [diagram](https://drive.google.com/open?id=0BxUhvFbuwEAZNjA0dUhwNmFMd2c)",
"Here is a close up of the [diagram](https://drive.google.com/open?id=0BxUhvFbuwEAZNjA0dUhwNmFMd2c) from the",
"> > Is this the reason why the change has",
"(from the [lasercut image](http://reprap.org/wiki/P3Steel_Vitamins#Lasercut_parts)): [](https://i.stack.imgur.com/6yZMo.jpg)",
"smooth bar and just an indentation for the bearing which",
"bracket at the top of the frame which secures the",
"Wiki page for the P3Steel, which shows the bearing assembly",
"the bearing assembly just apparently \"resting\" against the indentation: [, it is mentioned: > > The extruder no longer",
"bar and threaded rod (again, from [google docs](https://drive.google.com/file/d/0BxUhvFbuwEAZQjkyTDM3SndMSTA/view)): [): [):",
"indentation: [](https://i.stack.imgur.com/dAVUM.png) Here",
"at the top of the frame which secures the top",
"indentation for the bearing which holds the top of the",
"for the threaded rod and one for the top of",
"it was in version 1.x/2.x? It just does not look",
"one for the top of the smooth bar (from the",
"in version 4, the corresponding top Z axis bracket only",
"against the indentation: [ -",
"axis top bracket](https://i.stack.imgur.com/6yZMo.jpg)](https://i.stack.imgur.com/6yZMo.jpg) However, in version 4, the corresponding top",
"[diagram](https://drive.google.com/open?id=0BxUhvFbuwEAZNjA0dUhwNmFMd2c) from the [google docs repository](https://drive.google.com/open?id=0BxUhvFbuwEAZfkJDUUE0bm1pTXNfMFRKemdUUzJNZ2xIT0xybFJLdmdyQV9MZGFpcG42UlE&authuser=0), listed in the [v4",
"and version 4 of the [P3Steel frames](https://reprap.org/wiki/P3Steel) - in particular",
"changes, see [2. Frame versions](https://reprap.org/wiki/P3Steel#Frame_versions), it is mentioned: > >",
"Here is the laser cut parts, for version 1.x, showing",
"the smooth bars and threaded rods of the Z axis",
"sides. Here is the laser cut parts, for version 1.x,",
"for P3Steel v1](https://i.stack.imgur.com/2AN9z.jpg)](https://i.stack.imgur.com/2AN9z.jpg) Version 1.x/2.x has the AC08 bracket with",
"AC08 bracket with two holes, one for the threaded rod",
"bracket shown with the bar and threaded rod (again, from",
"the P3Steel, which shows the bearing assembly just apparently \"resting\"",
"axis top bracket](https://i.stack.imgur.com/MZe2i.jpg)](https://i.stack.imgur.com/MZe2i.jpg) Here is a close up of the",
"the list of version 4 changes, see [2. Frame versions](https://reprap.org/wiki/P3Steel#Frame_versions),",
"Does anyone know why the top of the threaded rod",
"the [v4 section](http://reprap.org/wiki/P3Steel#Frame_versions) on the RepRap Wiki page for the",
"differences between version 2.x and version 4 of the [P3Steel",
"[](https://i.stack.imgur.com/MZe2i.jpg) Here is a close",
"[Twitter](https://twitter.com/AlvaroReyRdz/status/738406531943763968)): [](https://i.stack.imgur.com/MZe2i.jpg) Here is a",
"has one hole for the smooth bar and just an",
"was in version 1.x/2.x? It just does not look particularly",
"P3Steel Z axis top bracket](https://i.stack.imgur.com/dAVUM.png)](https://i.stack.imgur.com/dAVUM.png) Here is the bracket shown",
"of version 4 changes, see [2. Frame versions](https://reprap.org/wiki/P3Steel#Frame_versions), it is",
"with two holes, one for the threaded rod and one",
"bearing which holds the top of the threaded rod (from",
"top bracket](https://i.stack.imgur.com/X0fcG.png)](https://i.stack.imgur.com/X0fcG.png) Does anyone know why the top of the"
] |
[
"crashes into the bed. As far as I can tell",
"to print the green bracket you see in the picture.",
"I do a print with the sensor, it moves to",
"bed hence there is nothing for it detect so it",
"can tell the nozzle is homing in the right place.",
"problem now is when I do a print with the",
"the new minimum position it needs to be in so",
"in this position the sensor is hanging off the bed",
"the picture. [](https://i.stack.imgur.com/6kxYw.jpg) My problem",
"Marlin the new minimum position it needs to be in",
"the nozzle is homing in the right place. How do",
"fine when using the stock trigger switch as I used",
"is homing in the right place. How do I tell",
"How do I tell Marlin the new minimum position it",
"My problem now is when I do a print with",
"this position the sensor is hanging off the bed hence",
"a print with the sensor, it moves to 0,0 position.",
"do I tell Marlin the new minimum position it needs",
"sensor is hanging off the bed hence there is nothing",
"As far as I can tell the nozzle is homing",
"trigger switch as I used it to print the green",
"with the sensor, it moves to 0,0 position. However in",
"the right place. How do I tell Marlin the new",
"sensor, it moves to 0,0 position. However in this position",
"needs to be in so it doesn't crash into the",
"position. However in this position the sensor is hanging off",
"printer printing fine when using the stock trigger switch as",
"I had my printer printing fine when using the stock",
"is nothing for it detect so it crashes into the",
"print the green bracket you see in the picture. [](https://i.stack.imgur.com/6kxYw.jpg)",
"far as I can tell the nozzle is homing in",
"hence there is nothing for it detect so it crashes",
"hanging off the bed hence there is nothing for it",
"when I do a print with the sensor, it moves",
"nothing for it detect so it crashes into the bed.",
"the sensor, it moves to 0,0 position. However in this",
"homing in the right place. How do I tell Marlin",
"switch as I used it to print the green bracket",
"tell the nozzle is homing in the right place. How",
"for it detect so it crashes into the bed. As",
"it detect so it crashes into the bed. As far",
"moves to 0,0 position. However in this position the sensor",
"the bed. As far as I can tell the nozzle",
"it needs to be in so it doesn't crash into",
"bed. As far as I can tell the nozzle is",
"[](https://i.stack.imgur.com/6kxYw.jpg) My problem now is",
"0,0 position. However in this position the sensor is hanging",
"position the sensor is hanging off the bed hence there",
"you see in the picture. [](https://i.stack.imgur.com/6kxYw.jpg) My problem now is when",
"it crashes into the bed. As far as I can",
"hotend](https://i.stack.imgur.com/6kxYw.jpg)](https://i.stack.imgur.com/6kxYw.jpg) My problem now is when I do a print",
"to 0,0 position. However in this position the sensor is",
"position it needs to be in so it doesn't crash",
"the sensor is hanging off the bed hence there is",
"when using the stock trigger switch as I used it",
"picture. [](https://i.stack.imgur.com/6kxYw.jpg) My problem now",
"printing fine when using the stock trigger switch as I",
"probe atached to hotend](https://i.stack.imgur.com/6kxYw.jpg)](https://i.stack.imgur.com/6kxYw.jpg) My problem now is when I",
"the green bracket you see in the picture. [](https://i.stack.imgur.com/6kxYw.jpg) My problem now is when I do a",
"tell Marlin the new minimum position it needs to be",
"bracket you see in the picture. [](https://i.stack.imgur.com/6kxYw.jpg) My",
"atached to hotend](https://i.stack.imgur.com/6kxYw.jpg)](https://i.stack.imgur.com/6kxYw.jpg) My problem now is when I do",
"to be in so it doesn't crash into the bed?"
] |
[
"if so has the repeatability of Z-homing improved any? Edit",
"the repeatability of common spring-arm limit switches is crappy at",
"switches is crappy at best. I'm looking to build &",
"removing the arm and triggering the switch button directly (e.g.",
"install one of the precision height adjusters for the Z-axis",
"any? Edit ---- Sorry -- this is a stock Prusa",
"build & install one of the precision height adjusters for",
"Edit ---- Sorry -- this is a stock Prusa i3,",
"and triggering the switch button directly (e.g. with a screw",
"some forum suggesting removing the arm and triggering the switch",
"contact between the vertically-moving subassembly and a microswitch mounted on",
"the repeatability of Z-homing improved any? Edit ---- Sorry --",
"---- Sorry -- this is a stock Prusa i3, which",
"Z-axis limit switch, and noticed a post on some forum",
"suggesting removing the arm and triggering the switch button directly",
"triggering the switch button directly (e.g. with a screw end).",
"anyone tried this, and if so has the repeatability of",
"one of the precision height adjusters for the Z-axis limit",
"a stock Prusa i3, which depends on physical contact between",
"switch button directly (e.g. with a screw end). Has anyone",
"looking to build & install one of the precision height",
"has the repeatability of Z-homing improved any? Edit ---- Sorry",
"best. I'm looking to build & install one of the",
"this is a stock Prusa i3, which depends on physical",
"limit switches is crappy at best. I'm looking to build",
"improved any? Edit ---- Sorry -- this is a stock",
"arm and triggering the switch button directly (e.g. with a",
"(e.g. with a screw end). Has anyone tried this, and",
"crappy at best. I'm looking to build & install one",
"and noticed a post on some forum suggesting removing the",
"is crappy at best. I'm looking to build & install",
"spring-arm limit switches is crappy at best. I'm looking to",
"a screw end). Has anyone tried this, and if so",
"I'm looking to build & install one of the precision",
"of common spring-arm limit switches is crappy at best. I'm",
"on physical contact between the vertically-moving subassembly and a microswitch",
"should!) that the repeatability of common spring-arm limit switches is",
"We all know (or should!) that the repeatability of common",
"Has anyone tried this, and if so has the repeatability",
"end). Has anyone tried this, and if so has the",
"post on some forum suggesting removing the arm and triggering",
"is a stock Prusa i3, which depends on physical contact",
"common spring-arm limit switches is crappy at best. I'm looking",
"the vertically-moving subassembly and a microswitch mounted on the frame.",
"which depends on physical contact between the vertically-moving subassembly and",
"forum suggesting removing the arm and triggering the switch button",
"adjusters for the Z-axis limit switch, and noticed a post",
"the Z-axis limit switch, and noticed a post on some",
"limit switch, and noticed a post on some forum suggesting",
"at best. I'm looking to build & install one of",
"physical contact between the vertically-moving subassembly and a microswitch mounted",
"all know (or should!) that the repeatability of common spring-arm",
"and if so has the repeatability of Z-homing improved any?",
"noticed a post on some forum suggesting removing the arm",
"precision height adjusters for the Z-axis limit switch, and noticed",
"Sorry -- this is a stock Prusa i3, which depends",
"switch, and noticed a post on some forum suggesting removing",
"& install one of the precision height adjusters for the",
"repeatability of common spring-arm limit switches is crappy at best.",
"the arm and triggering the switch button directly (e.g. with",
"depends on physical contact between the vertically-moving subassembly and a",
"with a screw end). Has anyone tried this, and if",
"height adjusters for the Z-axis limit switch, and noticed a",
"tried this, and if so has the repeatability of Z-homing",
"repeatability of Z-homing improved any? Edit ---- Sorry -- this",
"know (or should!) that the repeatability of common spring-arm limit",
"this, and if so has the repeatability of Z-homing improved",
"(or should!) that the repeatability of common spring-arm limit switches",
"so has the repeatability of Z-homing improved any? Edit ----",
"between the vertically-moving subassembly and a microswitch mounted on the",
"of the precision height adjusters for the Z-axis limit switch,",
"to build & install one of the precision height adjusters",
"i3, which depends on physical contact between the vertically-moving subassembly",
"a post on some forum suggesting removing the arm and",
"-- this is a stock Prusa i3, which depends on",
"the switch button directly (e.g. with a screw end). Has",
"for the Z-axis limit switch, and noticed a post on",
"the precision height adjusters for the Z-axis limit switch, and",
"stock Prusa i3, which depends on physical contact between the",
"of Z-homing improved any? Edit ---- Sorry -- this is",
"button directly (e.g. with a screw end). Has anyone tried",
"screw end). Has anyone tried this, and if so has",
"Prusa i3, which depends on physical contact between the vertically-moving",
"directly (e.g. with a screw end). Has anyone tried this,",
"on some forum suggesting removing the arm and triggering the",
"that the repeatability of common spring-arm limit switches is crappy",
"Z-homing improved any? Edit ---- Sorry -- this is a"
] |
[
"Is the obtained map indicating that the bed is already",
"I printed a 180 mm diamater cylinder and the Z",
"I use E because otherwise for some reason I have",
"printing. Any hint about what to check? Is the obtained",
"along the printing. Any hint about what to check? Is",
"corners of the bed. finally I get the map of",
"not seen Z moving a single step along the printing.",
"Then I run G29 E ( I use E because",
"reason I have not understood yet, Z does not lift",
"I have not seen Z moving a single step along",
"because otherwise for some reason I have not understood yet,",
"that the bed is already too leveled to act on",
"manage to setup the ABL on my Prosi. I run",
"the bed is already too leveled to act on any",
"Z does not lift during probings) probing 4 points on",
"and after that, the print starts. The first layer looks",
"what to check? Is the obtained map indicating that the",
"probing 4 points on the corners of the bed. finally",
"on any compensation? **UPDATE** I printed a 180 mm diamater",
"Matrix: +0.999999 +0.000000 +0.001233 -0.000005 +0.999992 +0.003905 -0.001233 -0.003905 +0.999992",
"``` and after that, the print starts. The first layer",
"same probe used for ABL). Then I run G29 E",
"+0.999992 +0.003905 -0.001233 -0.003905 +0.999992 ``` and after that, the",
"check? Is the obtained map indicating that the bed is",
"Correction Matrix: +0.999999 +0.000000 +0.001233 -0.000005 +0.999992 +0.003905 -0.001233 -0.003905",
"home all axes (for z I use the same probe",
"-0.003905 +0.999992 ``` and after that, the print starts. The",
"get the map of the bed: ``` Bed Level Correction",
"the corners of the bed. finally I get the map",
"some reason I have not understood yet, Z does not",
"-0.001233 -0.003905 +0.999992 ``` and after that, the print starts.",
"otherwise for some reason I have not understood yet, Z",
"already too leveled to act on any compensation? **UPDATE** I",
"+0.000000 +0.001233 -0.000005 +0.999992 +0.003905 -0.001233 -0.003905 +0.999992 ``` and",
"diamater cylinder and the Z axis is not compensating the",
"+0.999992 ``` and after that, the print starts. The first",
"not understood yet, Z does not lift during probings) probing",
"on the corners of the bed. finally I get the",
"all axes (for z I use the same probe used",
"during probings) probing 4 points on the corners of the",
"the Z axis is not compensating the 1mm difference from",
"I run G28 to home all axes (for z I",
"seen Z moving a single step along the printing. Any",
"to home all axes (for z I use the same",
"Any hint about what to check? Is the obtained map",
"cylinder and the Z axis is not compensating the 1mm",
"``` Bed Level Correction Matrix: +0.999999 +0.000000 +0.001233 -0.000005 +0.999992",
"Level Correction Matrix: +0.999999 +0.000000 +0.001233 -0.000005 +0.999992 +0.003905 -0.001233",
"mm diamater cylinder and the Z axis is not compensating",
"compensation? **UPDATE** I printed a 180 mm diamater cylinder and",
"bed is already too leveled to act on any compensation?",
"is already too leveled to act on any compensation? **UPDATE**",
"run G29 E ( I use E because otherwise for",
"leveled to act on any compensation? **UPDATE** I printed a",
"points on the corners of the bed. finally I get",
"the bed: ``` Bed Level Correction Matrix: +0.999999 +0.000000 +0.001233",
"Z moving a single step along the printing. Any hint",
"that, the print starts. The first layer looks perfect however",
"The first layer looks perfect however I have not seen",
"( I use E because otherwise for some reason I",
"G29 E ( I use E because otherwise for some",
"starts. The first layer looks perfect however I have not",
"axis is not compensating the 1mm difference from edge to",
"yet, Z does not lift during probings) probing 4 points",
"compensating the 1mm difference from edge to edge of the",
"I get the map of the bed: ``` Bed Level",
"hint about what to check? Is the obtained map indicating",
"a 180 mm diamater cylinder and the Z axis is",
"to setup the ABL on my Prosi. I run G28",
"not compensating the 1mm difference from edge to edge of",
"printed a 180 mm diamater cylinder and the Z axis",
"about what to check? Is the obtained map indicating that",
"use E because otherwise for some reason I have not",
"obtained map indicating that the bed is already too leveled",
"looks perfect however I have not seen Z moving a",
"understood yet, Z does not lift during probings) probing 4",
"first layer looks perfect however I have not seen Z",
"the 1mm difference from edge to edge of the bed.",
"of the bed. finally I get the map of the",
"+0.999999 +0.000000 +0.001233 -0.000005 +0.999992 +0.003905 -0.001233 -0.003905 +0.999992 ```",
"map indicating that the bed is already too leveled to",
"after that, the print starts. The first layer looks perfect",
"I have not understood yet, Z does not lift during",
"of the bed: ``` Bed Level Correction Matrix: +0.999999 +0.000000",
"probe used for ABL). Then I run G29 E (",
"lift during probings) probing 4 points on the corners of",
"Bed Level Correction Matrix: +0.999999 +0.000000 +0.001233 -0.000005 +0.999992 +0.003905",
"probings) probing 4 points on the corners of the bed.",
"G28 to home all axes (for z I use the",
"+0.003905 -0.001233 -0.003905 +0.999992 ``` and after that, the print",
"moving a single step along the printing. Any hint about",
"run G28 to home all axes (for z I use",
"Z axis is not compensating the 1mm difference from edge",
"indicating that the bed is already too leveled to act",
"however I have not seen Z moving a single step",
"for ABL). Then I run G29 E ( I use",
"finally manage to setup the ABL on my Prosi. I",
"does not lift during probings) probing 4 points on the",
"Prosi. I run G28 to home all axes (for z",
"print starts. The first layer looks perfect however I have",
"180 mm diamater cylinder and the Z axis is not",
"the print starts. The first layer looks perfect however I",
"I run G29 E ( I use E because otherwise",
"use the same probe used for ABL). Then I run",
"layer looks perfect however I have not seen Z moving",
"to check? Is the obtained map indicating that the bed",
"ABL). Then I run G29 E ( I use E",
"the map of the bed: ``` Bed Level Correction Matrix:",
"E ( I use E because otherwise for some reason",
"on my Prosi. I run G28 to home all axes",
"perfect however I have not seen Z moving a single",
"step along the printing. Any hint about what to check?",
"and the Z axis is not compensating the 1mm difference",
"(for z I use the same probe used for ABL).",
"my Prosi. I run G28 to home all axes (for",
"used for ABL). Then I run G29 E ( I",
"for some reason I have not understood yet, Z does",
"not lift during probings) probing 4 points on the corners",
"axes (for z I use the same probe used for",
"the printing. Any hint about what to check? Is the",
"the same probe used for ABL). Then I run G29",
"the bed. finally I get the map of the bed:",
"4 points on the corners of the bed. finally I",
"any compensation? **UPDATE** I printed a 180 mm diamater cylinder",
"the ABL on my Prosi. I run G28 to home",
"E because otherwise for some reason I have not understood",
"the obtained map indicating that the bed is already too",
"map of the bed: ``` Bed Level Correction Matrix: +0.999999",
"finally I get the map of the bed: ``` Bed",
"-0.000005 +0.999992 +0.003905 -0.001233 -0.003905 +0.999992 ``` and after that,",
"have not seen Z moving a single step along the",
"to act on any compensation? **UPDATE** I printed a 180",
"z I use the same probe used for ABL). Then",
"I finally manage to setup the ABL on my Prosi.",
"setup the ABL on my Prosi. I run G28 to",
"act on any compensation? **UPDATE** I printed a 180 mm",
"a single step along the printing. Any hint about what",
"have not understood yet, Z does not lift during probings)",
"**UPDATE** I printed a 180 mm diamater cylinder and the",
"is not compensating the 1mm difference from edge to edge",
"bed. finally I get the map of the bed: ```",
"bed: ``` Bed Level Correction Matrix: +0.999999 +0.000000 +0.001233 -0.000005",
"too leveled to act on any compensation? **UPDATE** I printed",
"single step along the printing. Any hint about what to",
"+0.001233 -0.000005 +0.999992 +0.003905 -0.001233 -0.003905 +0.999992 ``` and after",
"I use the same probe used for ABL). Then I",
"ABL on my Prosi. I run G28 to home all"
] |
[
"of the printings get worse if I fill out the",
"the printings get worse if I fill out the board...",
"I fill out the board... Is it true? Should I",
"on an 20\\*20cm, I've heard that the quality of the",
"out the board... Is it true? Should I keep it",
"the board... Is it true? Should I keep it to",
"an 20\\*20cm, I've heard that the quality of the printings",
"quality of the printings get worse if I fill out",
"3D-printing on an 20\\*20cm, I've heard that the quality of",
"it true? Should I keep it to small amounts at",
"I've heard that the quality of the printings get worse",
"fill out the board... Is it true? Should I keep",
"Is it true? Should I keep it to small amounts",
"it to small amounts at the time or doesn't it",
"20\\*20cm, I've heard that the quality of the printings get",
"I keep it to small amounts at the time or",
"When 3D-printing on an 20\\*20cm, I've heard that the quality",
"to small amounts at the time or doesn't it matter?",
"if I fill out the board... Is it true? Should",
"get worse if I fill out the board... Is it",
"the quality of the printings get worse if I fill",
"board... Is it true? Should I keep it to small",
"that the quality of the printings get worse if I",
"worse if I fill out the board... Is it true?",
"keep it to small amounts at the time or doesn't",
"printings get worse if I fill out the board... Is",
"Should I keep it to small amounts at the time",
"true? Should I keep it to small amounts at the",
"heard that the quality of the printings get worse if"
] |
[
"again. Hot end is 0.4 mm and was heated to",
"take to troubleshoot the issue? Has anyone seen this before?",
"became fine again. Hot end is 0.4 mm and was",
"What sort of steps should I take to troubleshoot the",
"extruded fine, then started to wiggle, then became fine again.",
"to wiggle, then became fine again. Hot end is 0.4",
"is 0.4 mm and was heated to 230C. What sort",
"the issue? Has anyone seen this before? [](https://i.stack.imgur.com/ffssj.jpg)",
"print. The filament extruded fine, then started to wiggle, then",
"was heated to 230C. What sort of steps should I",
"then became fine again. Hot end is 0.4 mm and",
"end is 0.4 mm and was heated to 230C. What",
"transparent ABS prepping for a print. The filament extruded fine,",
"fine, then started to wiggle, then became fine again. Hot",
"to 230C. What sort of steps should I take to",
"troubleshoot the issue? Has anyone seen this before? [![Photo of",
"Creator Dual tonight, and loaded some transparent ABS prepping for",
"and loaded some transparent ABS prepping for a print. The",
"I take to troubleshoot the issue? Has anyone seen this",
"wiggle, then became fine again. Hot end is 0.4 mm",
"0.4 mm and was heated to 230C. What sort of",
"mm and was heated to 230C. What sort of steps",
"fine again. Hot end is 0.4 mm and was heated",
"for a print. The filament extruded fine, then started to",
"some transparent ABS prepping for a print. The filament extruded",
"Has anyone seen this before? [![Photo of extruded filament exhibiting",
"filament extruded fine, then started to wiggle, then became fine",
"up my Flashforge Creator Dual tonight, and loaded some transparent",
"should I take to troubleshoot the issue? Has anyone seen",
"issue? Has anyone seen this before? [![Photo of extruded filament",
"of steps should I take to troubleshoot the issue? Has",
"Dual tonight, and loaded some transparent ABS prepping for a",
"started to wiggle, then became fine again. Hot end is",
"Flashforge Creator Dual tonight, and loaded some transparent ABS prepping",
"and was heated to 230C. What sort of steps should",
"ABS prepping for a print. The filament extruded fine, then",
"230C. What sort of steps should I take to troubleshoot",
"sort of steps should I take to troubleshoot the issue?",
"prepping for a print. The filament extruded fine, then started",
"steps should I take to troubleshoot the issue? Has anyone",
"to troubleshoot the issue? Has anyone seen this before? [![Photo",
"tonight, and loaded some transparent ABS prepping for a print."
] |
[
"tricky and I highly doubt it's even plausible to print",
"and I highly doubt it's even plausible to print them.",
"All the components themselves can be printed without a problem,",
"not sure whether I'll be able to put them all",
"great if I can find a way to use those.",
"those. Would an SLA or perhaps an SLS printer be",
"but I'm not sure whether I'll be able to put",
"able to pull it off? Of course the thing still",
"doubt it's even plausible to print them. All the components",
"end. What are my options? FDM printers are probably out,",
"off? Of course the thing still has to work (move)",
"one 3D printed. However, assembling those can be tricky and",
"able to put them all together in the end. What",
"to work (move) in the end. [](https://i.stack.imgur.com/OuWFEm.jpg)",
"thing still has to work (move) in the end. [![Caged",
"even plausible to print them. All the components themselves can",
"printed without a problem, but I'm not sure whether I'll",
"probably out, although it would be great if I can",
"love to get one 3D printed. However, assembling those can",
"to print them. All the components themselves can be printed",
"be able to pull it off? Of course the thing",
"be tricky and I highly doubt it's even plausible to",
"Of course the thing still has to work (move) in",
"deep-groove ball bearing. Now I'd love to get one 3D",
"whether I'll be able to put them all together in",
"be great if I can find a way to use",
"printer be able to pull it off? Of course the",
"them all together in the end. What are my options?",
"out, although it would be great if I can find",
"without a problem, but I'm not sure whether I'll be",
"be able to put them all together in the end.",
"designed a non-self-aligning caged deep-groove ball bearing. Now I'd love",
"assembling those can be tricky and I highly doubt it's",
"However, assembling those can be tricky and I highly doubt",
"be printed without a problem, but I'm not sure whether",
"has to work (move) in the end. [![Caged deep-grooved ball",
"I can find a way to use those. Would an",
"put them all together in the end. What are my",
"I highly doubt it's even plausible to print them. All",
"the end. What are my options? FDM printers are probably",
"in the end. What are my options? FDM printers are",
"can be printed without a problem, but I'm not sure",
"perhaps an SLS printer be able to pull it off?",
"together in the end. What are my options? FDM printers",
"themselves can be printed without a problem, but I'm not",
"bearing. Now I'd love to get one 3D printed. However,",
"caged deep-groove ball bearing. Now I'd love to get one",
"would be great if I can find a way to",
"recently designed a non-self-aligning caged deep-groove ball bearing. Now I'd",
"although it would be great if I can find a",
"What are my options? FDM printers are probably out, although",
"still has to work (move) in the end. [![Caged deep-grooved",
"SLS printer be able to pull it off? Of course",
"are probably out, although it would be great if I",
"all together in the end. What are my options? FDM",
"to use those. Would an SLA or perhaps an SLS",
"plausible to print them. All the components themselves can be",
"an SLA or perhaps an SLS printer be able to",
"options? FDM printers are probably out, although it would be",
"course the thing still has to work (move) in the",
"if I can find a way to use those. Would",
"a way to use those. Would an SLA or perhaps",
"to put them all together in the end. What are",
"3D printed. However, assembling those can be tricky and I"
] |
[
"at roughly half-way up the axis, the right-hand thread seemed",
"be getting stuck (more often when moving up than down).",
"I don't think is easy to answer with existing questions.",
"found I was having problems with the extruder crashing into",
"I tracked this down to two factors. First, I was",
"was having problems with the extruder crashing into the bed.",
"clear (and not mentioned in the building instructions) was what",
"often when moving up than down). What wasn't clear (and",
"I was winding the extruder head up some distance before",
"I thought I'd adjusted the bed leveling OK, the calibration",
"down to two factors. First, I was winding the extruder",
"to keep getting messed up. I tracked this down to",
"existing questions. As soon as I'd built my ANET-A8 (Prusa",
"wasn't clear (and not mentioned in the building instructions) was",
"two factors. First, I was winding the extruder head up",
"built my ANET-A8 (Prusa i3 DIY kit), I found I",
"easy to answer with existing questions. As soon as I'd",
"into the bed. Although I thought I'd adjusted the bed",
"half-way up the axis, the right-hand thread seemed to be",
"actually solved this, but I think its still a useful",
"don't think is easy to answer with existing questions. As",
"seemed to keep getting messed up. I tracked this down",
"to two factors. First, I was winding the extruder head",
"kit), I found I was having problems with the extruder",
"thought I'd adjusted the bed leveling OK, the calibration seemed",
"seemed to be getting stuck (more often when moving up",
"(and not mentioned in the building instructions) was what might",
"the right-hand thread seemed to be getting stuck (more often",
"mentioned in the building instructions) was what might cause this",
"factors. First, I was winding the extruder head up some",
"a print. Second, at roughly half-way up the axis, the",
"OK, the calibration seemed to keep getting messed up. I",
"the bed leveling OK, the calibration seemed to keep getting",
"question which I don't think is easy to answer with",
"a useful question which I don't think is easy to",
"getting messed up. I tracked this down to two factors.",
"questions. As soon as I'd built my ANET-A8 (Prusa i3",
"First, I was winding the extruder head up some distance",
"is easy to answer with existing questions. As soon as",
"some distance before loading the filament and starting a print.",
"(more often when moving up than down). What wasn't clear",
"adjusted the bed leveling OK, the calibration seemed to keep",
"ANET-A8 (Prusa i3 DIY kit), I found I was having",
"bed. Although I thought I'd adjusted the bed leveling OK,",
"bed leveling OK, the calibration seemed to keep getting messed",
"I think its still a useful question which I don't",
"to answer with existing questions. As soon as I'd built",
"which I don't think is easy to answer with existing",
"and starting a print. Second, at roughly half-way up the",
"answer with existing questions. As soon as I'd built my",
"the filament and starting a print. Second, at roughly half-way",
"axis, the right-hand thread seemed to be getting stuck (more",
"the axis, the right-hand thread seemed to be getting stuck",
"this down to two factors. First, I was winding the",
"distance before loading the filament and starting a print. Second,",
"messed up. I tracked this down to two factors. First,",
"but I think its still a useful question which I",
"solved this, but I think its still a useful question",
"roughly half-way up the axis, the right-hand thread seemed to",
"as I'd built my ANET-A8 (Prusa i3 DIY kit), I",
"to be getting stuck (more often when moving up than",
"with existing questions. As soon as I'd built my ANET-A8",
"loading the filament and starting a print. Second, at roughly",
"tracked this down to two factors. First, I was winding",
"up some distance before loading the filament and starting a",
"useful question which I don't think is easy to answer",
"Second, at roughly half-way up the axis, the right-hand thread",
"filament and starting a print. Second, at roughly half-way up",
"leveling OK, the calibration seemed to keep getting messed up.",
"having problems with the extruder crashing into the bed. Although",
"think is easy to answer with existing questions. As soon",
"Although I thought I'd adjusted the bed leveling OK, the",
"the calibration seemed to keep getting messed up. I tracked",
"up than down). What wasn't clear (and not mentioned in",
"before loading the filament and starting a print. Second, at",
"extruder crashing into the bed. Although I thought I'd adjusted",
"getting stuck (more often when moving up than down). What",
"crashing into the bed. Although I thought I'd adjusted the",
"not mentioned in the building instructions) was what might cause",
"I'd built my ANET-A8 (Prusa i3 DIY kit), I found",
"I was having problems with the extruder crashing into the",
"right-hand thread seemed to be getting stuck (more often when",
"still a useful question which I don't think is easy",
"extruder head up some distance before loading the filament and",
"than down). What wasn't clear (and not mentioned in the",
"head up some distance before loading the filament and starting",
"As soon as I'd built my ANET-A8 (Prusa i3 DIY",
"(Prusa i3 DIY kit), I found I was having problems",
"DIY kit), I found I was having problems with the",
"was winding the extruder head up some distance before loading",
"keep getting messed up. I tracked this down to two",
"I found I was having problems with the extruder crashing",
"stuck (more often when moving up than down). What wasn't",
"in the building instructions) was what might cause this problem.",
"print. Second, at roughly half-way up the axis, the right-hand",
"winding the extruder head up some distance before loading the",
"its still a useful question which I don't think is",
"this, but I think its still a useful question which",
"problems with the extruder crashing into the bed. Although I",
"my ANET-A8 (Prusa i3 DIY kit), I found I was",
"I've actually solved this, but I think its still a",
"What wasn't clear (and not mentioned in the building instructions)",
"down). What wasn't clear (and not mentioned in the building",
"I'd adjusted the bed leveling OK, the calibration seemed to",
"moving up than down). What wasn't clear (and not mentioned",
"think its still a useful question which I don't think",
"up the axis, the right-hand thread seemed to be getting",
"the extruder head up some distance before loading the filament",
"i3 DIY kit), I found I was having problems with",
"with the extruder crashing into the bed. Although I thought",
"soon as I'd built my ANET-A8 (Prusa i3 DIY kit),",
"the bed. Although I thought I'd adjusted the bed leveling",
"up. I tracked this down to two factors. First, I",
"starting a print. Second, at roughly half-way up the axis,",
"thread seemed to be getting stuck (more often when moving",
"when moving up than down). What wasn't clear (and not",
"calibration seemed to keep getting messed up. I tracked this",
"the extruder crashing into the bed. Although I thought I'd"
] |
[
"a 5 axis printer would preform better than a 3",
"but this could have been done with just linear layers.",
"CNC/3D printer combo machine. I understand what the benefits of",
"benefits of 5 axis are for CNC machines, but are",
"for 3D printing. In this [video](https://youtu.be/w8Fl8L4yk8M) they show the printer",
"with just linear layers. Would there be any cases where",
"been done with just linear layers. Would there be any",
"have been done with just linear layers. Would there be",
"what the benefits of 5 axis are for CNC machines,",
"this [video](https://youtu.be/w8Fl8L4yk8M) they show the printer printing on an angle,",
"axis printer would preform better than a 3 axis printer?",
"axis CNC/3D printer combo machine. I understand what the benefits",
"the benefits of 5 axis are for CNC machines, but",
"[5AxisMaker](http://www.5axismaker.com/5axis/) has a 5 axis CNC/3D printer combo machine. I",
"In this [video](https://youtu.be/w8Fl8L4yk8M) they show the printer printing on an",
"done with just linear layers. Would there be any cases",
"5 axis printer would preform better than a 3 axis",
"5 axis CNC/3D printer combo machine. I understand what the",
"printer combo machine. I understand what the benefits of 5",
"axis are for CNC machines, but are there any benefits",
"could have been done with just linear layers. Would there",
"3D printing. In this [video](https://youtu.be/w8Fl8L4yk8M) they show the printer printing",
"printing. In this [video](https://youtu.be/w8Fl8L4yk8M) they show the printer printing on",
"benefits for 3D printing. In this [video](https://youtu.be/w8Fl8L4yk8M) they show the",
"this could have been done with just linear layers. Would",
"just linear layers. Would there be any cases where a",
"the printer printing on an angle, but this could have",
"I understand what the benefits of 5 axis are for",
"there any benefits for 3D printing. In this [video](https://youtu.be/w8Fl8L4yk8M) they",
"are there any benefits for 3D printing. In this [video](https://youtu.be/w8Fl8L4yk8M)",
"are for CNC machines, but are there any benefits for",
"where a 5 axis printer would preform better than a",
"for CNC machines, but are there any benefits for 3D",
"of 5 axis are for CNC machines, but are there",
"an angle, but this could have been done with just",
"be any cases where a 5 axis printer would preform",
"combo machine. I understand what the benefits of 5 axis",
"machines, but are there any benefits for 3D printing. In",
"but are there any benefits for 3D printing. In this",
"any benefits for 3D printing. In this [video](https://youtu.be/w8Fl8L4yk8M) they show",
"CNC machines, but are there any benefits for 3D printing.",
"machine. I understand what the benefits of 5 axis are",
"they show the printer printing on an angle, but this",
"understand what the benefits of 5 axis are for CNC",
"printing on an angle, but this could have been done",
"linear layers. Would there be any cases where a 5",
"5 axis are for CNC machines, but are there any",
"Would there be any cases where a 5 axis printer",
"a 5 axis CNC/3D printer combo machine. I understand what",
"layers. Would there be any cases where a 5 axis",
"has a 5 axis CNC/3D printer combo machine. I understand",
"show the printer printing on an angle, but this could",
"printer printing on an angle, but this could have been",
"there be any cases where a 5 axis printer would",
"cases where a 5 axis printer would preform better than",
"on an angle, but this could have been done with",
"any cases where a 5 axis printer would preform better",
"[video](https://youtu.be/w8Fl8L4yk8M) they show the printer printing on an angle, but",
"angle, but this could have been done with just linear"
] |
[
"then convert that into .OFF file to be able to",
"from Solidworks and then convert that into .OFF file to",
"want to skeletize the surface mesh. For that I need",
"convert that into .OFF file to be able to use",
"that into .OFF file to be able to use it",
"that I need to export .STL from Solidworks and then",
"be able to use it in CGAL library for skeletonzation.",
"need to export .STL from Solidworks and then convert that",
"I need to export .STL from Solidworks and then convert",
"I want to skeletize the surface mesh. For that I",
"For that I need to export .STL from Solidworks and",
"use it in CGAL library for skeletonzation. How can I",
"to skeletize the surface mesh. For that I need to",
"surface mesh. For that I need to export .STL from",
"Solidworks and then convert that into .OFF file to be",
"and then convert that into .OFF file to be able",
"into .OFF file to be able to use it in",
".STL from Solidworks and then convert that into .OFF file",
"it in CGAL library for skeletonzation. How can I do",
"able to use it in CGAL library for skeletonzation. How",
"export .STL from Solidworks and then convert that into .OFF",
".OFF file to be able to use it in CGAL",
"file to be able to use it in CGAL library",
"skeletize the surface mesh. For that I need to export",
"to be able to use it in CGAL library for",
"in CGAL library for skeletonzation. How can I do this?",
"the surface mesh. For that I need to export .STL",
"mesh. For that I need to export .STL from Solidworks",
"to export .STL from Solidworks and then convert that into",
"to use it in CGAL library for skeletonzation. How can"
] |
[
"(primary + support material); * Four spools (two per material",
"of the community uses Marlin - is that correct? Given",
"others looking: After much review, Klipper was selected as the",
"material with y connector, perhaps add auto switch-over functionality later);",
"forward firmware - all kinematic calculations are done on the",
"connector, perhaps add auto switch-over functionality later); * Camera; *",
"Intended Z resolution 0.13mm; * Dual extruders (primary + support",
"are done on the host computer, instead of on the",
"on ATMega2560 to control the printer; * Printer should gracefully",
"host computer, instead of on the microprocessor, resulting is significantly",
"the host computer, instead of on the microprocessor, resulting is",
"0.13mm; * Dual extruders (primary + support material); * Four",
"and apparently gives smoother physical performance. Yet, from what I",
"the following requirements: * Intended Z resolution 0.13mm; * Dual",
"3D printing environment, with the following requirements: * Intended Z",
"notable differences between the primary firmware options (Marlin/Repetier) for this",
"most forward firmware - all kinematic calculations are done on",
"a compact firmware like Teacup? Edit 12/April/2017: For others looking:",
"* Onboard 11\" touchscreen for control & interaction, run by",
"3; * Custom board based on ATMega2560 to control the",
"as the most forward firmware - all kinematic calculations are",
"gather, 95% of the community uses Marlin - is that",
"* Intended Z resolution 0.13mm; * Dual extruders (primary +",
"are custom building a Cartesian 3D printer to be used",
"etc. Question: How to select firmware? Are there notable differences",
"uses Marlin - is that correct? Given that this printer",
"worth considering a compact firmware like Teacup? Edit 12/April/2017: For",
"the google code groups, I understand the Repetier has a",
"the community uses Marlin - is that correct? Given that",
"Edit 12/April/2017: For others looking: After much review, Klipper was",
"later); * Camera; * Onboard 11\" touchscreen for control &",
"* Printer should gracefully handle conditions like \"out of material\",",
"select firmware? Are there notable differences between the primary firmware",
"switch-over functionality later); * Camera; * Onboard 11\" touchscreen for",
"there notable differences between the primary firmware options (Marlin/Repetier) for",
"is that correct? Given that this printer will have the",
"following requirements: * Intended Z resolution 0.13mm; * Dual extruders",
"How to select firmware? Are there notable differences between the",
"We are custom building a Cartesian 3D printer to be",
"control & interaction, run by a Raspberry Pi 3; *",
"I can gather, 95% of the community uses Marlin -",
"& interaction, run by a Raspberry Pi 3; * Custom",
"perhaps add auto switch-over functionality later); * Camera; * Onboard",
"Pi3 to control \"higher functions\", is it worth considering a",
"to control \"higher functions\", is it worth considering a compact",
"After much review, Klipper was selected as the most forward",
"For others looking: After much review, Klipper was selected as",
"touchscreen for control & interaction, run by a Raspberry Pi",
"setup? From the google code groups, I understand the Repetier",
"firmware like Teacup? Edit 12/April/2017: For others looking: After much",
"requirements: * Intended Z resolution 0.13mm; * Dual extruders (primary",
"differences between the primary firmware options (Marlin/Repetier) for this setup?",
"Teacup? Edit 12/April/2017: For others looking: After much review, Klipper",
"by a Raspberry Pi 3; * Custom board based on",
"material\", etc. Question: How to select firmware? Are there notable",
"to be used in a production 3D printing environment, with",
"3D printer to be used in a production 3D printing",
"much cleaner code base, and apparently gives smoother physical performance.",
"like Teacup? Edit 12/April/2017: For others looking: After much review,",
"what I can gather, 95% of the community uses Marlin",
"the Pi3 to control \"higher functions\", is it worth considering",
"community uses Marlin - is that correct? Given that this",
"the Repetier has a much cleaner code base, and apparently",
"* Custom board based on ATMega2560 to control the printer;",
"has a much cleaner code base, and apparently gives smoother",
"printer to be used in a production 3D printing environment,",
"smoother physical performance. Yet, from what I can gather, 95%",
"all kinematic calculations are done on the host computer, instead",
"Z resolution 0.13mm; * Dual extruders (primary + support material);",
"+ support material); * Four spools (two per material with",
"considering a compact firmware like Teacup? Edit 12/April/2017: For others",
"11\" touchscreen for control & interaction, run by a Raspberry",
"I understand the Repetier has a much cleaner code base,",
"- all kinematic calculations are done on the host computer,",
"that correct? Given that this printer will have the Pi3",
"in a production 3D printing environment, with the following requirements:",
"building a Cartesian 3D printer to be used in a",
"based on ATMega2560 to control the printer; * Printer should",
"a Raspberry Pi 3; * Custom board based on ATMega2560",
"conditions like \"out of material\", etc. Question: How to select",
"firmware - all kinematic calculations are done on the host",
"Dual extruders (primary + support material); * Four spools (two",
"interaction, run by a Raspberry Pi 3; * Custom board",
"Repetier has a much cleaner code base, and apparently gives",
"will have the Pi3 to control \"higher functions\", is it",
"printer will have the Pi3 to control \"higher functions\", is",
"with y connector, perhaps add auto switch-over functionality later); *",
"base, and apparently gives smoother physical performance. Yet, from what",
"Pi 3; * Custom board based on ATMega2560 to control",
"the primary firmware options (Marlin/Repetier) for this setup? From the",
"understand the Repetier has a much cleaner code base, and",
"cleaner code base, and apparently gives smoother physical performance. Yet,",
"support material); * Four spools (two per material with y",
"be used in a production 3D printing environment, with the",
"y connector, perhaps add auto switch-over functionality later); * Camera;",
"the printer; * Printer should gracefully handle conditions like \"out",
"Camera; * Onboard 11\" touchscreen for control & interaction, run",
"material); * Four spools (two per material with y connector,",
"this printer will have the Pi3 to control \"higher functions\",",
"printer; * Printer should gracefully handle conditions like \"out of",
"add auto switch-over functionality later); * Camera; * Onboard 11\"",
"* Camera; * Onboard 11\" touchscreen for control & interaction,",
"of on the microprocessor, resulting is significantly faster/smoother stepper movement.",
"from what I can gather, 95% of the community uses",
"spools (two per material with y connector, perhaps add auto",
"code groups, I understand the Repetier has a much cleaner",
"computer, instead of on the microprocessor, resulting is significantly faster/smoother",
"\"higher functions\", is it worth considering a compact firmware like",
"instead of on the microprocessor, resulting is significantly faster/smoother stepper",
"control the printer; * Printer should gracefully handle conditions like",
"on the host computer, instead of on the microprocessor, resulting",
"options (Marlin/Repetier) for this setup? From the google code groups,",
"gracefully handle conditions like \"out of material\", etc. Question: How",
"Question: How to select firmware? Are there notable differences between",
"a production 3D printing environment, with the following requirements: *",
"ATMega2560 to control the printer; * Printer should gracefully handle",
"(two per material with y connector, perhaps add auto switch-over",
"like \"out of material\", etc. Question: How to select firmware?",
"(Marlin/Repetier) for this setup? From the google code groups, I",
"can gather, 95% of the community uses Marlin - is",
"was selected as the most forward firmware - all kinematic",
"for control & interaction, run by a Raspberry Pi 3;",
"this setup? From the google code groups, I understand the",
"From the google code groups, I understand the Repetier has",
"printing environment, with the following requirements: * Intended Z resolution",
"apparently gives smoother physical performance. Yet, from what I can",
"is it worth considering a compact firmware like Teacup? Edit",
"google code groups, I understand the Repetier has a much",
"board based on ATMega2560 to control the printer; * Printer",
"Printer should gracefully handle conditions like \"out of material\", etc.",
"Custom board based on ATMega2560 to control the printer; *",
"firmware options (Marlin/Repetier) for this setup? From the google code",
"groups, I understand the Repetier has a much cleaner code",
"12/April/2017: For others looking: After much review, Klipper was selected",
"it worth considering a compact firmware like Teacup? Edit 12/April/2017:",
"between the primary firmware options (Marlin/Repetier) for this setup? From",
"kinematic calculations are done on the host computer, instead of",
"selected as the most forward firmware - all kinematic calculations",
"functionality later); * Camera; * Onboard 11\" touchscreen for control",
"Onboard 11\" touchscreen for control & interaction, run by a",
"firmware? Are there notable differences between the primary firmware options",
"environment, with the following requirements: * Intended Z resolution 0.13mm;",
"much review, Klipper was selected as the most forward firmware",
"of material\", etc. Question: How to select firmware? Are there",
"auto switch-over functionality later); * Camera; * Onboard 11\" touchscreen",
"with the following requirements: * Intended Z resolution 0.13mm; *",
"Klipper was selected as the most forward firmware - all",
"performance. Yet, from what I can gather, 95% of the",
"physical performance. Yet, from what I can gather, 95% of",
"Four spools (two per material with y connector, perhaps add",
"control \"higher functions\", is it worth considering a compact firmware",
"resolution 0.13mm; * Dual extruders (primary + support material); *",
"Cartesian 3D printer to be used in a production 3D",
"extruders (primary + support material); * Four spools (two per",
"95% of the community uses Marlin - is that correct?",
"custom building a Cartesian 3D printer to be used in",
"code base, and apparently gives smoother physical performance. Yet, from",
"used in a production 3D printing environment, with the following",
"should gracefully handle conditions like \"out of material\", etc. Question:",
"to control the printer; * Printer should gracefully handle conditions",
"compact firmware like Teacup? Edit 12/April/2017: For others looking: After",
"looking: After much review, Klipper was selected as the most",
"for this setup? From the google code groups, I understand",
"a much cleaner code base, and apparently gives smoother physical",
"review, Klipper was selected as the most forward firmware -",
"the most forward firmware - all kinematic calculations are done",
"that this printer will have the Pi3 to control \"higher",
"handle conditions like \"out of material\", etc. Question: How to",
"correct? Given that this printer will have the Pi3 to",
"Raspberry Pi 3; * Custom board based on ATMega2560 to",
"* Four spools (two per material with y connector, perhaps",
"to select firmware? Are there notable differences between the primary",
"production 3D printing environment, with the following requirements: * Intended",
"\"out of material\", etc. Question: How to select firmware? Are",
"Are there notable differences between the primary firmware options (Marlin/Repetier)",
"per material with y connector, perhaps add auto switch-over functionality",
"Yet, from what I can gather, 95% of the community",
"done on the host computer, instead of on the microprocessor,",
"primary firmware options (Marlin/Repetier) for this setup? From the google",
"gives smoother physical performance. Yet, from what I can gather,",
"have the Pi3 to control \"higher functions\", is it worth",
"* Dual extruders (primary + support material); * Four spools",
"calculations are done on the host computer, instead of on",
"- is that correct? Given that this printer will have",
"Given that this printer will have the Pi3 to control",
"Marlin - is that correct? Given that this printer will",
"a Cartesian 3D printer to be used in a production",
"run by a Raspberry Pi 3; * Custom board based",
"functions\", is it worth considering a compact firmware like Teacup?"
] |
[
"question therefore is: Are there any tutorials that could help",
"with an iris tipe lid that can be printed already",
"be delivered I've given quite a lot of time to",
"(there are some project for boxes with an iris tipe",
"create incredible models with gears, screws, lids and a lot",
"the interface and sketch up some simple shaped model without",
"help me create better models? If I need to I'm",
"need to I'm ready to learn to use a software",
"above. My question therefore is: Are there any tutorials that",
"a software other than Blender. I've tried searching for a",
"like to learn to do some of that as well.",
"bought a 3D printer and waiting for it to be",
"delivered I've given quite a lot of time to looking",
"to looking things up on Thingiverse. I see people create",
"as well. At the moment I have some proficiency with",
"already assembled as a single model). I'd like to learn",
"lot of time to looking things up on Thingiverse. I",
"parts described above. My question therefore is: Are there any",
"well. At the moment I have some proficiency with Blender",
"people create incredible models with gears, screws, lids and a",
"do some of that as well. At the moment I",
"time to looking things up on Thingiverse. I see people",
"some simple shaped model without any of the functional parts",
"iris tipe lid that can be printed already assembled as",
"ready to learn to use a software other than Blender.",
"with gears, screws, lids and a lot of very cool",
"Blender where I can navigate the interface and sketch up",
"Blender. I've tried searching for a similar question but found",
"could help me create better models? If I need to",
"I've recently bought a 3D printer and waiting for it",
"3D printer and waiting for it to be delivered I've",
"some project for boxes with an iris tipe lid that",
"At the moment I have some proficiency with Blender where",
"Are there any tutorials that could help me create better",
"that as well. At the moment I have some proficiency",
"better models? If I need to I'm ready to learn",
"to learn to do some of that as well. At",
"a lot of very cool and functional connectors (there are",
"functional connectors (there are some project for boxes with an",
"very cool and functional connectors (there are some project for",
"given quite a lot of time to looking things up",
"cool and functional connectors (there are some project for boxes",
"a single model). I'd like to learn to do some",
"the moment I have some proficiency with Blender where I",
"of the functional parts described above. My question therefore is:",
"is: Are there any tutorials that could help me create",
"than Blender. I've tried searching for a similar question but",
"where I can navigate the interface and sketch up some",
"functional parts described above. My question therefore is: Are there",
"can be printed already assembled as a single model). I'd",
"other than Blender. I've tried searching for a similar question",
"learn to do some of that as well. At the",
"I've given quite a lot of time to looking things",
"model). I'd like to learn to do some of that",
"for it to be delivered I've given quite a lot",
"Thingiverse. I see people create incredible models with gears, screws,",
"I'm ready to learn to use a software other than",
"waiting for it to be delivered I've given quite a",
"proficiency with Blender where I can navigate the interface and",
"I have some proficiency with Blender where I can navigate",
"any of the functional parts described above. My question therefore",
"I've tried searching for a similar question but found nothing.",
"lids and a lot of very cool and functional connectors",
"assembled as a single model). I'd like to learn to",
"some of that as well. At the moment I have",
"simple shaped model without any of the functional parts described",
"are some project for boxes with an iris tipe lid",
"without any of the functional parts described above. My question",
"on Thingiverse. I see people create incredible models with gears,",
"an iris tipe lid that can be printed already assembled",
"software other than Blender. I've tried searching for a similar",
"navigate the interface and sketch up some simple shaped model",
"described above. My question therefore is: Are there any tutorials",
"sketch up some simple shaped model without any of the",
"connectors (there are some project for boxes with an iris",
"I'd like to learn to do some of that as",
"moment I have some proficiency with Blender where I can",
"have some proficiency with Blender where I can navigate the",
"models with gears, screws, lids and a lot of very",
"for boxes with an iris tipe lid that can be",
"printer and waiting for it to be delivered I've given",
"things up on Thingiverse. I see people create incredible models",
"quite a lot of time to looking things up on",
"I see people create incredible models with gears, screws, lids",
"with Blender where I can navigate the interface and sketch",
"to use a software other than Blender. I've tried searching",
"it to be delivered I've given quite a lot of",
"see people create incredible models with gears, screws, lids and",
"that could help me create better models? If I need",
"tutorials that could help me create better models? If I",
"lid that can be printed already assembled as a single",
"and waiting for it to be delivered I've given quite",
"that can be printed already assembled as a single model).",
"a 3D printer and waiting for it to be delivered",
"of very cool and functional connectors (there are some project",
"as a single model). I'd like to learn to do",
"any tutorials that could help me create better models? If",
"there any tutorials that could help me create better models?",
"shaped model without any of the functional parts described above.",
"My question therefore is: Are there any tutorials that could",
"single model). I'd like to learn to do some of",
"screws, lids and a lot of very cool and functional",
"a lot of time to looking things up on Thingiverse.",
"incredible models with gears, screws, lids and a lot of",
"and functional connectors (there are some project for boxes with",
"models? If I need to I'm ready to learn to",
"be printed already assembled as a single model). I'd like",
"up on Thingiverse. I see people create incredible models with",
"I need to I'm ready to learn to use a",
"and a lot of very cool and functional connectors (there",
"learn to use a software other than Blender. I've tried",
"to do some of that as well. At the moment",
"to I'm ready to learn to use a software other",
"tipe lid that can be printed already assembled as a",
"gears, screws, lids and a lot of very cool and",
"can navigate the interface and sketch up some simple shaped",
"up some simple shaped model without any of the functional",
"model without any of the functional parts described above. My",
"therefore is: Are there any tutorials that could help me",
"use a software other than Blender. I've tried searching for",
"to learn to use a software other than Blender. I've",
"If I need to I'm ready to learn to use",
"create better models? If I need to I'm ready to",
"printed already assembled as a single model). I'd like to",
"to be delivered I've given quite a lot of time",
"some proficiency with Blender where I can navigate the interface",
"I can navigate the interface and sketch up some simple",
"boxes with an iris tipe lid that can be printed",
"looking things up on Thingiverse. I see people create incredible",
"recently bought a 3D printer and waiting for it to",
"of that as well. At the moment I have some",
"the functional parts described above. My question therefore is: Are",
"and sketch up some simple shaped model without any of",
"interface and sketch up some simple shaped model without any",
"lot of very cool and functional connectors (there are some",
"of time to looking things up on Thingiverse. I see",
"me create better models? If I need to I'm ready",
"project for boxes with an iris tipe lid that can"
] |
[
"I have that covered now, but I was also wondering",
"safe when attaching my wires to my heat bed. I",
"also wondering what solder / specs on the solder are",
"quite new (never been opened) it's Radio Shack `64-008 E`",
"on the solder are considered safe when attaching my wires",
"(never been opened) it's Radio Shack `64-008 E` 60/40 Standard",
"wires I should use, and I believe I have that",
"some solder here at the house, it's quite new (never",
"when attaching my wires to my heat bed. I have",
"and I believe I have that covered now, but I",
"opened) it's Radio Shack `64-008 E` 60/40 Standard Rosin-Core with",
"solder / specs on the solder are considered safe when",
"my wires to my heat bed. I have some solder",
"asked which wires I should use, and I believe I",
"solder are considered safe when attaching my wires to my",
"are considered safe when attaching my wires to my heat",
"bed. I have some solder here at the house, it's",
"house, it's quite new (never been opened) it's Radio Shack",
"it's quite new (never been opened) it's Radio Shack `64-008",
"new (never been opened) it's Radio Shack `64-008 E` 60/40",
"/ specs on the solder are considered safe when attaching",
"I should use, and I believe I have that covered",
"have that covered now, but I was also wondering what",
"should use, and I believe I have that covered now,",
"it's Radio Shack `64-008 E` 60/40 Standard Rosin-Core with 0.062",
"already asked which wires I should use, and I believe",
"wondering what solder / specs on the solder are considered",
"covered now, but I was also wondering what solder /",
"specs on the solder are considered safe when attaching my",
"I was also wondering what solder / specs on the",
"been opened) it's Radio Shack `64-008 E` 60/40 Standard Rosin-Core",
"considered safe when attaching my wires to my heat bed.",
"I believe I have that covered now, but I was",
"wires to my heat bed. I have some solder here",
"Radio Shack `64-008 E` 60/40 Standard Rosin-Core with 0.062 diameter...",
"what solder / specs on the solder are considered safe",
"the house, it's quite new (never been opened) it's Radio",
"at the house, it's quite new (never been opened) it's",
"but I was also wondering what solder / specs on",
"the solder are considered safe when attaching my wires to",
"solder here at the house, it's quite new (never been",
"I've already asked which wires I should use, and I",
"which wires I should use, and I believe I have",
"to my heat bed. I have some solder here at",
"attaching my wires to my heat bed. I have some",
"heat bed. I have some solder here at the house,",
"here at the house, it's quite new (never been opened)",
"was also wondering what solder / specs on the solder",
"my heat bed. I have some solder here at the",
"now, but I was also wondering what solder / specs",
"use, and I believe I have that covered now, but",
"believe I have that covered now, but I was also",
"that covered now, but I was also wondering what solder",
"have some solder here at the house, it's quite new",
"I have some solder here at the house, it's quite"
] |
[
"here](https://i.stack.imgur.com/PQtTj.jpg)](https://i.stack.imgur.com/PQtTj.jpg) I'm using a QIDI dual extruder printer with Makerware",
"earlier similar print at 220°C was not as bad but",
"2.2.2.89 software and these parameters: [](https://i.stack.imgur.com/6FJLL.png) [. I tried 215 and 225°C and",
"printer with Makerware 2.2.2.89 software and these parameters: [](https://i.stack.imgur.com/nlRb8.jpg) Inside: [](https://i.stack.imgur.com/PQtTj.jpg) I'm",
"[this](http://www.thingiverse.com/thing:1560347). I tried 215 and 225°C and both had the",
"avoided? This is a PLA print, and it should look",
"print, and it should look like [this](http://www.thingiverse.com/thing:1560347). I tried 215",
"I tried 215 and 225°C and both had the same",
"had some catching- it seems hit and miss and not",
"seems hit and miss and not strongly related to extrusion",
"a QIDI dual extruder printer with Makerware 2.2.2.89 software and",
"same effect. An earlier similar print at 220°C was not",
"and these parameters: [](https://i.stack.imgur.com/6FJLL.png) [](https://i.stack.imgur.com/PQtTj.jpg) I'm using a QIDI dual extruder",
"220°C was not as bad but it still had some",
"extrusion temperature. Outside: [](https://i.stack.imgur.com/nlRb8.jpg) Inside: [. I tried",
"[](https://i.stack.imgur.com/6FJLL.png) [](https://i.stack.imgur.com/Ge9ZK.png) Speed is",
"and not strongly related to extrusion temperature. Outside: [](https://i.stack.imgur.com/PQtTj.jpg) I'm using a QIDI dual extruder printer with",
"it still had some catching- it seems hit and miss",
"some catching- it seems hit and miss and not strongly",
"hit and miss and not strongly related to extrusion temperature.",
"can it be avoided? This is a PLA print, and",
"and both had the same effect. An earlier similar print",
"image description here](https://i.stack.imgur.com/nlRb8.jpg)](https://i.stack.imgur.com/nlRb8.jpg) Inside: [](https://i.stack.imgur.com/PQtTj.jpg) I'm using",
"these parameters: [](https://i.stack.imgur.com/6FJLL.png) [](https://i.stack.imgur.com/Ge9ZK.png)",
"and miss and not strongly related to extrusion temperature. Outside:",
"to extrusion temperature. Outside: [](https://i.stack.imgur.com/nlRb8.jpg) Inside: [. I tried 215 and",
"extruder printer with Makerware 2.2.2.89 software and these parameters: [. I",
"cause this effect, and how can it be avoided? This",
"description here](https://i.stack.imgur.com/nlRb8.jpg)](https://i.stack.imgur.com/nlRb8.jpg) Inside: [](https://i.stack.imgur.com/PQtTj.jpg) I'm using a",
"it be avoided? This is a PLA print, and it",
"would cause this effect, and how can it be avoided?",
"related to extrusion temperature. Outside: [](https://i.stack.imgur.com/nlRb8.jpg) Inside:",
"effect. An earlier similar print at 220°C was not as",
"Makerware 2.2.2.89 software and these parameters: [](https://i.stack.imgur.com/6FJLL.png)",
"catching- it seems hit and miss and not strongly related",
"like [this](http://www.thingiverse.com/thing:1560347). I tried 215 and 225°C and both had",
"still had some catching- it seems hit and miss and",
"and 225°C and both had the same effect. An earlier",
"miss and not strongly related to extrusion temperature. Outside: [. I tried 215 and 225°C and both",
"not strongly related to extrusion temperature. Outside: [.",
"parameters: [](https://i.stack.imgur.com/6FJLL.png) [](https://i.stack.imgur.com/Ge9ZK.png) Speed",
"software and these parameters: [](https://i.stack.imgur.com/6FJLL.png) [](https://i.stack.imgur.com/PQtTj.jpg) I'm using a QIDI dual extruder printer",
"Inside: [](https://i.stack.imgur.com/PQtTj.jpg) I'm using a QIDI dual",
"here](https://i.stack.imgur.com/nlRb8.jpg)](https://i.stack.imgur.com/nlRb8.jpg) Inside: [](https://i.stack.imgur.com/PQtTj.jpg) I'm using a QIDI",
"Outside: [](https://i.stack.imgur.com/nlRb8.jpg) Inside: [](https://i.stack.imgur.com/PQtTj.jpg)",
"this effect, and how can it be avoided? This is",
"similar print at 220°C was not as bad but it",
"print at 220°C was not as bad but it still",
"not as bad but it still had some catching- it",
"This is a PLA print, and it should look like",
"strongly related to extrusion temperature. Outside: [](https://i.stack.imgur.com/nlRb8.jpg)",
"was not as bad but it still had some catching-",
"temperature. Outside: [](https://i.stack.imgur.com/nlRb8.jpg) Inside: [. I tried 215 and 225°C",
"image description here](https://i.stack.imgur.com/6FJLL.png)](https://i.stack.imgur.com/6FJLL.png) [](https://i.stack.imgur.com/Ge9ZK.png) Speed is 60/80mm/s.",
"at 220°C was not as bad but it still had",
"225°C and both had the same effect. An earlier similar",
"An earlier similar print at 220°C was not as bad"
] |
[
"The first layer prints OK, layer adhesion to the bed",
"flow rate, temperatures and print speed, but gotten little improvement",
"gaps. On larger pieces, or with an increased feed rate,",
"occurs with multiple filaments and materials. I've already tried to",
"as bad when printing in the \"top right to bottom",
"the following pattern on my Prosi clone: [](https://i.stack.imgur.com/uskfa.jpg) The first layer prints OK, layer adhesion",
"low quality second layer print](https://i.stack.imgur.com/uskfa.jpg)](https://i.stack.imgur.com/uskfa.jpg) The first layer prints OK,",
"sometimes gets so bad that parts of the second layer",
"print](https://i.stack.imgur.com/uskfa.jpg)](https://i.stack.imgur.com/uskfa.jpg) The first layer prints OK, layer adhesion to the",
"worse when printing in the \"top left to bottom right\"",
"left to bottom right\" direction, but not as bad when",
"so bad that parts of the second layer detach and",
"I get the impression that this effect is worse when",
"the \"top left to bottom right\" direction, but not as",
"layer prints OK, layer adhesion to the bed is good.",
"gotten little improvement if any. What might be causing this",
"to the bed is good. The second layer shows the",
"adhesion to the bed is good. The second layer shows",
"of low quality second layer print](https://i.stack.imgur.com/uskfa.jpg)](https://i.stack.imgur.com/uskfa.jpg) The first layer prints",
"rate, temperatures and print speed, but gotten little improvement if",
"I've already tried to manipulate the flow rate, temperatures and",
"the weird gaps. On larger pieces, or with an increased",
"larger pieces, or with an increased feed rate, it sometimes",
"right to bottom left\" direction. This occurs with multiple filaments",
"this effect is worse when printing in the \"top left",
"right\" direction, but not as bad when printing in the",
"first layer prints OK, layer adhesion to the bed is",
"gets so bad that parts of the second layer detach",
"second layer detach and are dragged across the print. I",
"but not as bad when printing in the \"top right",
"the print. I get the impression that this effect is",
"pattern on my Prosi clone: [](https://i.stack.imgur.com/uskfa.jpg) The first layer prints OK, layer",
"bad when printing in the \"top right to bottom left\"",
"is good. The second layer shows the weird gaps. On",
"left\" direction. This occurs with multiple filaments and materials. I've",
"layer shows the weird gaps. On larger pieces, or with",
"clone: [](https://i.stack.imgur.com/uskfa.jpg) The first",
"to bottom right\" direction, but not as bad when printing",
"on my Prosi clone: [](https://i.stack.imgur.com/uskfa.jpg) The first layer prints OK, layer adhesion to",
"rate, it sometimes gets so bad that parts of the",
"This occurs with multiple filaments and materials. I've already tried",
"prints OK, layer adhesion to the bed is good. The",
"that parts of the second layer detach and are dragged",
"I'm seeing the following pattern on my Prosi clone: [](https://i.stack.imgur.com/uskfa.jpg) The first layer",
"Prosi clone: [](https://i.stack.imgur.com/uskfa.jpg) The",
"effect is worse when printing in the \"top left to",
"the \"top right to bottom left\" direction. This occurs with",
"On larger pieces, or with an increased feed rate, it",
"my Prosi clone: [](https://i.stack.imgur.com/uskfa.jpg)",
"feed rate, it sometimes gets so bad that parts of",
"following pattern on my Prosi clone: [![Photo of low quality",
"when printing in the \"top right to bottom left\" direction.",
"the bed is good. The second layer shows the weird",
"weird gaps. On larger pieces, or with an increased feed",
"\"top right to bottom left\" direction. This occurs with multiple",
"in the \"top right to bottom left\" direction. This occurs",
"get the impression that this effect is worse when printing",
"direction. This occurs with multiple filaments and materials. I've already",
"seeing the following pattern on my Prosi clone: [![Photo of",
"and print speed, but gotten little improvement if any. What",
"across the print. I get the impression that this effect",
"that this effect is worse when printing in the \"top"
] |
[
"to build a calibration plate, which I was told can",
"I am completely new to 3D printing. I need to",
"back plastic and a 3d printer. But I am afraid",
"I am trying to get as much info as I",
"info as I can before I consult any 3d printing",
"In particular, I am wondering how to get the white",
"how to get the white dots on the surfaces. My",
"know more if I give this to someone for fabrication.",
"and a 3d printer. But I am afraid I need",
"this to someone for fabrication. In particular, I am wondering",
"if I give this to someone for fabrication. In particular,",
"as I can before I consult any 3d printing vendors.",
"need to know more if I give this to someone",
"calibration plate, which I was told can be built using",
"surfaces. My question is probably ill-posed, but I am trying",
"ill-posed, but I am trying to get as much info",
"am afraid I need to know more if I give",
"to someone for fabrication. In particular, I am wondering how",
"the surfaces. My question is probably ill-posed, but I am",
"on the surfaces. My question is probably ill-posed, but I",
"built using vero back plastic and a 3d printer. But",
"I am afraid I need to know more if I",
"I was told can be built using vero back plastic",
"vero back plastic and a 3d printer. But I am",
"be built using vero back plastic and a 3d printer.",
"to know more if I give this to someone for",
"much info as I can before I consult any 3d",
"get as much info as I can before I consult",
"I give this to someone for fabrication. In particular, I",
"I am wondering how to get the white dots on",
"a calibration plate, which I was told can be built",
"completely new to 3D printing. I need to build a",
"can before I consult any 3d printing vendors. Thanks [](https://i.stack.imgur.com/32GtS.jpg)",
"printing. I need to build a calibration plate, which I",
"particular, I am wondering how to get the white dots",
"My question is probably ill-posed, but I am trying to",
"am completely new to 3D printing. I need to build",
"build a calibration plate, which I was told can be",
"am wondering how to get the white dots on the",
"question is probably ill-posed, but I am trying to get",
"fabrication. In particular, I am wondering how to get the",
"told can be built using vero back plastic and a",
"the white dots on the surfaces. My question is probably",
"am trying to get as much info as I can",
"which I was told can be built using vero back",
"to 3D printing. I need to build a calibration plate,",
"wondering how to get the white dots on the surfaces.",
"3D printing. I need to build a calibration plate, which",
"get the white dots on the surfaces. My question is",
"using vero back plastic and a 3d printer. But I",
"white dots on the surfaces. My question is probably ill-posed,",
"as much info as I can before I consult any",
"I need to know more if I give this to",
"give this to someone for fabrication. In particular, I am",
"afraid I need to know more if I give this",
"a 3d printer. But I am afraid I need to",
"for fabrication. In particular, I am wondering how to get"
] |
[
"glass, and not just a piece of normal glass intended",
"visible under a certain light or if the sheet is",
"at around £16 - £26, but there are a few",
"received from a Chinese supplier on eBay is actually a",
"a particular angle? I ask because most of the 200",
"a Chinese supplier on eBay is actually a sheet of",
"supplier on eBay is actually a sheet of Borosilicate glass,",
"Glass Clear Build Plate UK STOCK](http://www.ebay.co.uk/itm/300x200x3mm-3D-Printer-Heated-Bed-Toughened-Glass-Clear-Build-Plate-UK-STOCK-/302067007035). To paraphrase, \"Usually if",
"glass, although they do not mention the word Borosilicate, such",
"under a certain light or if the sheet is viewed",
"then they are probably fake.\" However, I wondered whether it",
"whether it was worth a punt as it is only",
"is viewed at a particular angle? I ask because most",
"probably fake.\" However, I wondered whether it was worth a",
"would be able to verify its veracity once it was",
"laminations, or markings/features, visible under a certain light or if",
"glass intended for glazing purposes? Are there any laminations, or",
"do not mention the word Borosilicate, such as this one,",
"priced at around £16 - £26, but there are a",
"Clear Build Plate UK STOCK](http://www.ebay.co.uk/itm/300x200x3mm-3D-Printer-Heated-Bed-Toughened-Glass-Clear-Build-Plate-UK-STOCK-/302067007035). To paraphrase, \"Usually if things",
"to be toughened glass, although they do not mention the",
"at just £10, which still claim to be toughened glass,",
"3D Printer Heated Bed Toughened Glass Clear Build Plate UK",
"of normal glass intended for glazing purposes? Are there any",
"ask because most of the 200 x 300 mm sheets",
"£16 - £26, but there are a few priced at",
"it is only £10, and then if I would be",
"that one has received from a Chinese supplier on eBay",
"a few priced at just £10, which still claim to",
"certain light or if the sheet is viewed at a",
"punt as it is only £10, and then if I",
"Borosilicate, such as this one, [300x200x3mm 3D Printer Heated Bed",
"mention the word Borosilicate, such as this one, [300x200x3mm 3D",
"if things seem to good to be true, then they",
"which still claim to be toughened glass, although they do",
"determine whether the sheet of glass that one has received",
"paraphrase, \"Usually if things seem to good to be true,",
"I ask because most of the 200 x 300 mm",
"toughened glass, although they do not mention the word Borosilicate,",
"To paraphrase, \"Usually if things seem to good to be",
"a way to determine whether the sheet of glass that",
"200 x 300 mm sheets on eBay are priced at",
"sheet of glass that one has received from a Chinese",
"one, [300x200x3mm 3D Printer Heated Bed Toughened Glass Clear Build",
"a piece of normal glass intended for glazing purposes? Are",
"sheets on eBay are priced at around £16 - £26,",
"be toughened glass, although they do not mention the word",
"a punt as it is only £10, and then if",
"but there are a few priced at just £10, which",
"purposes? Are there any laminations, or markings/features, visible under a",
"a sheet of Borosilicate glass, and not just a piece",
"at a particular angle? I ask because most of the",
"viewed at a particular angle? I ask because most of",
"eBay are priced at around £16 - £26, but there",
"of Borosilicate glass, and not just a piece of normal",
"they do not mention the word Borosilicate, such as this",
"any laminations, or markings/features, visible under a certain light or",
"the sheet of glass that one has received from a",
"£10, which still claim to be toughened glass, although they",
"the word Borosilicate, such as this one, [300x200x3mm 3D Printer",
"just £10, which still claim to be toughened glass, although",
"wondered whether it was worth a punt as it is",
"the 200 x 300 mm sheets on eBay are priced",
"the sheet is viewed at a particular angle? I ask",
"x 300 mm sheets on eBay are priced at around",
"there any laminations, or markings/features, visible under a certain light",
"as it is only £10, and then if I would",
"or markings/features, visible under a certain light or if the",
"still claim to be toughened glass, although they do not",
"Printer Heated Bed Toughened Glass Clear Build Plate UK STOCK](http://www.ebay.co.uk/itm/300x200x3mm-3D-Printer-Heated-Bed-Toughened-Glass-Clear-Build-Plate-UK-STOCK-/302067007035).",
"is actually a sheet of Borosilicate glass, and not just",
"not mention the word Borosilicate, such as this one, [300x200x3mm",
"Build Plate UK STOCK](http://www.ebay.co.uk/itm/300x200x3mm-3D-Printer-Heated-Bed-Toughened-Glass-Clear-Build-Plate-UK-STOCK-/302067007035). To paraphrase, \"Usually if things seem",
"and not just a piece of normal glass intended for",
"to verify its veracity once it was in my hands.",
"it was worth a punt as it is only £10,",
"and then if I would be able to verify its",
"of glass that one has received from a Chinese supplier",
"most of the 200 x 300 mm sheets on eBay",
"then if I would be able to verify its veracity",
"£10, and then if I would be able to verify",
"markings/features, visible under a certain light or if the sheet",
"Chinese supplier on eBay is actually a sheet of Borosilicate",
"light or if the sheet is viewed at a particular",
"Bed Toughened Glass Clear Build Plate UK STOCK](http://www.ebay.co.uk/itm/300x200x3mm-3D-Printer-Heated-Bed-Toughened-Glass-Clear-Build-Plate-UK-STOCK-/302067007035). To paraphrase,",
"a certain light or if the sheet is viewed at",
"such as this one, [300x200x3mm 3D Printer Heated Bed Toughened",
"[300x200x3mm 3D Printer Heated Bed Toughened Glass Clear Build Plate",
"piece of normal glass intended for glazing purposes? Are there",
"worth a punt as it is only £10, and then",
"for glazing purposes? Are there any laminations, or markings/features, visible",
"are priced at around £16 - £26, but there are",
"has received from a Chinese supplier on eBay is actually",
"normal glass intended for glazing purposes? Are there any laminations,",
"are probably fake.\" However, I wondered whether it was worth",
"Is there actually a way to determine whether the sheet",
"angle? I ask because most of the 200 x 300",
"glazing purposes? Are there any laminations, or markings/features, visible under",
"claim to be toughened glass, although they do not mention",
"this one, [300x200x3mm 3D Printer Heated Bed Toughened Glass Clear",
"glass that one has received from a Chinese supplier on",
"to be true, then they are probably fake.\" However, I",
"from a Chinese supplier on eBay is actually a sheet",
"word Borosilicate, such as this one, [300x200x3mm 3D Printer Heated",
"there actually a way to determine whether the sheet of",
"UK STOCK](http://www.ebay.co.uk/itm/300x200x3mm-3D-Printer-Heated-Bed-Toughened-Glass-Clear-Build-Plate-UK-STOCK-/302067007035). To paraphrase, \"Usually if things seem to good",
"sheet of Borosilicate glass, and not just a piece of",
"Plate UK STOCK](http://www.ebay.co.uk/itm/300x200x3mm-3D-Printer-Heated-Bed-Toughened-Glass-Clear-Build-Plate-UK-STOCK-/302067007035). To paraphrase, \"Usually if things seem to",
"they are probably fake.\" However, I wondered whether it was",
"able to verify its veracity once it was in my",
"on eBay are priced at around £16 - £26, but",
"be true, then they are probably fake.\" However, I wondered",
"300 mm sheets on eBay are priced at around £16",
"not just a piece of normal glass intended for glazing",
"However, I wondered whether it was worth a punt as",
"way to determine whether the sheet of glass that one",
"are a few priced at just £10, which still claim",
"particular angle? I ask because most of the 200 x",
"be able to verify its veracity once it was in",
"one has received from a Chinese supplier on eBay is",
"if the sheet is viewed at a particular angle? I",
"was worth a punt as it is only £10, and",
"although they do not mention the word Borosilicate, such as",
"I would be able to verify its veracity once it",
"to good to be true, then they are probably fake.\"",
"\"Usually if things seem to good to be true, then",
"or if the sheet is viewed at a particular angle?",
"Borosilicate glass, and not just a piece of normal glass",
"Are there any laminations, or markings/features, visible under a certain",
"actually a way to determine whether the sheet of glass",
"true, then they are probably fake.\" However, I wondered whether",
"around £16 - £26, but there are a few priced",
"good to be true, then they are probably fake.\" However,",
"I wondered whether it was worth a punt as it",
"things seem to good to be true, then they are",
"is only £10, and then if I would be able",
"because most of the 200 x 300 mm sheets on",
"seem to good to be true, then they are probably",
"priced at just £10, which still claim to be toughened",
"sheet is viewed at a particular angle? I ask because",
"only £10, and then if I would be able to",
"on eBay is actually a sheet of Borosilicate glass, and",
"of the 200 x 300 mm sheets on eBay are",
"eBay is actually a sheet of Borosilicate glass, and not",
"as this one, [300x200x3mm 3D Printer Heated Bed Toughened Glass",
"intended for glazing purposes? Are there any laminations, or markings/features,",
"- £26, but there are a few priced at just",
"fake.\" However, I wondered whether it was worth a punt",
"mm sheets on eBay are priced at around £16 -",
"few priced at just £10, which still claim to be",
"Heated Bed Toughened Glass Clear Build Plate UK STOCK](http://www.ebay.co.uk/itm/300x200x3mm-3D-Printer-Heated-Bed-Toughened-Glass-Clear-Build-Plate-UK-STOCK-/302067007035). To",
"there are a few priced at just £10, which still",
"just a piece of normal glass intended for glazing purposes?",
"£26, but there are a few priced at just £10,",
"if I would be able to verify its veracity once",
"whether the sheet of glass that one has received from",
"actually a sheet of Borosilicate glass, and not just a",
"to determine whether the sheet of glass that one has",
"Toughened Glass Clear Build Plate UK STOCK](http://www.ebay.co.uk/itm/300x200x3mm-3D-Printer-Heated-Bed-Toughened-Glass-Clear-Build-Plate-UK-STOCK-/302067007035). To paraphrase, \"Usually",
"STOCK](http://www.ebay.co.uk/itm/300x200x3mm-3D-Printer-Heated-Bed-Toughened-Glass-Clear-Build-Plate-UK-STOCK-/302067007035). To paraphrase, \"Usually if things seem to good to"
] |
[
"with: ``` stty -F /dev/ttyUSB0 250000 ``` But, unfortunately, this",
"be possible to directly send G-code to the printer serial",
"be unsupported under Ubuntu, giving the error: ``` stty: invalid",
"-F /dev/ttyUSB0 250000 ``` But, unfortunately, this particular baud rate",
"controller runs at 250000 baud, I have tried setting the",
"250 kBd with: ``` stty -F /dev/ttyUSB0 250000 ``` But,",
"rate appears to be unsupported under Ubuntu, giving the error:",
"send G-code to the printer serial connection using pipes under",
"Ubuntu, giving the error: ``` stty: invalid argument ‘250000’ ```",
"``` But, unfortunately, this particular baud rate appears to be",
"possible to directly send G-code to the printer serial connection",
"> /dev/ttyUSB0 ``` My controller runs at 250000 baud, I",
"at 250000 baud, I have tried setting the TTY baud",
"under Linux? Example: ``` echo M106 > /dev/ttyUSB0 ``` My",
"to the printer serial connection using pipes under Linux? Example:",
"rate to 250 kBd with: ``` stty -F /dev/ttyUSB0 250000",
"the printer serial connection using pipes under Linux? Example: ```",
"kBd with: ``` stty -F /dev/ttyUSB0 250000 ``` But, unfortunately,",
"appears to be unsupported under Ubuntu, giving the error: ```",
"particular baud rate appears to be unsupported under Ubuntu, giving",
"the TTY baud rate to 250 kBd with: ``` stty",
"TTY baud rate to 250 kBd with: ``` stty -F",
"baud, I have tried setting the TTY baud rate to",
"echo M106 > /dev/ttyUSB0 ``` My controller runs at 250000",
"My controller runs at 250000 baud, I have tried setting",
"this particular baud rate appears to be unsupported under Ubuntu,",
"Example: ``` echo M106 > /dev/ttyUSB0 ``` My controller runs",
"pipes under Linux? Example: ``` echo M106 > /dev/ttyUSB0 ```",
"G-code to the printer serial connection using pipes under Linux?",
"have tried setting the TTY baud rate to 250 kBd",
"to directly send G-code to the printer serial connection using",
"it be possible to directly send G-code to the printer",
"I have tried setting the TTY baud rate to 250",
"/dev/ttyUSB0 250000 ``` But, unfortunately, this particular baud rate appears",
"250000 baud, I have tried setting the TTY baud rate",
"to 250 kBd with: ``` stty -F /dev/ttyUSB0 250000 ```",
"250000 ``` But, unfortunately, this particular baud rate appears to",
"tried setting the TTY baud rate to 250 kBd with:",
"runs at 250000 baud, I have tried setting the TTY",
"printer serial connection using pipes under Linux? Example: ``` echo",
"unfortunately, this particular baud rate appears to be unsupported under",
"``` echo M106 > /dev/ttyUSB0 ``` My controller runs at",
"M106 > /dev/ttyUSB0 ``` My controller runs at 250000 baud,",
"``` My controller runs at 250000 baud, I have tried",
"stty -F /dev/ttyUSB0 250000 ``` But, unfortunately, this particular baud",
"Linux? Example: ``` echo M106 > /dev/ttyUSB0 ``` My controller",
"unsupported under Ubuntu, giving the error: ``` stty: invalid argument",
"to be unsupported under Ubuntu, giving the error: ``` stty:",
"``` stty -F /dev/ttyUSB0 250000 ``` But, unfortunately, this particular",
"serial connection using pipes under Linux? Example: ``` echo M106",
"setting the TTY baud rate to 250 kBd with: ```",
"directly send G-code to the printer serial connection using pipes",
"baud rate to 250 kBd with: ``` stty -F /dev/ttyUSB0",
"baud rate appears to be unsupported under Ubuntu, giving the",
"under Ubuntu, giving the error: ``` stty: invalid argument ‘250000’",
"/dev/ttyUSB0 ``` My controller runs at 250000 baud, I have",
"But, unfortunately, this particular baud rate appears to be unsupported",
"Should it be possible to directly send G-code to the",
"connection using pipes under Linux? Example: ``` echo M106 >",
"using pipes under Linux? Example: ``` echo M106 > /dev/ttyUSB0"
] |
[
"since heating elements require a lot of electricity. Also does",
"to what grade of wire I need to solder to",
"grade of wire I need to solder to it. It",
"it, since heating elements require a lot of electricity. Also",
"one of the elements of the system that heats the",
"being one of the elements of the system that heats",
"to find out what sort of wire is the correct",
"sort of wire is the correct kind to use on",
"extruder. I'm uncertain as to what grade of wire I",
"that it would be important to find out what sort",
"It being one of the elements of the system that",
"it would be important to find out what sort of",
"large resistor that goes in my J-Head extruder. It's grey,",
"as to what grade of wire I need to solder",
"wire is the correct kind to use on it, since",
"the elements of the system that heats the hottest, I",
"I need to solder to it. It being one of",
"system that heats the hottest, I would think that it",
"what sort of wire is the correct kind to use",
"is the correct kind to use on it, since heating",
"heating elements require a lot of electricity. Also does the",
"a lot of electricity. Also does the solder type I",
"the extruder. I'm uncertain as to what grade of wire",
"of electricity. Also does the solder type I use matter?",
"resistor that goes in my J-Head extruder. It's grey, and",
"I have a large resistor that goes in my J-Head",
"what grade of wire I need to solder to it.",
"It's grey, and it came with the extruder. I'm uncertain",
"goes in my J-Head extruder. It's grey, and it came",
"to solder to it. It being one of the elements",
"I'm uncertain as to what grade of wire I need",
"hottest, I would think that it would be important to",
"kind to use on it, since heating elements require a",
"find out what sort of wire is the correct kind",
"of the elements of the system that heats the hottest,",
"of the system that heats the hottest, I would think",
"that heats the hottest, I would think that it would",
"of wire is the correct kind to use on it,",
"I would think that it would be important to find",
"to it. It being one of the elements of the",
"extruder. It's grey, and it came with the extruder. I'm",
"solder to it. It being one of the elements of",
"would be important to find out what sort of wire",
"be important to find out what sort of wire is",
"use on it, since heating elements require a lot of",
"elements require a lot of electricity. Also does the solder",
"require a lot of electricity. Also does the solder type",
"of wire I need to solder to it. It being",
"with the extruder. I'm uncertain as to what grade of",
"grey, and it came with the extruder. I'm uncertain as",
"the system that heats the hottest, I would think that",
"wire I need to solder to it. It being one",
"correct kind to use on it, since heating elements require",
"came with the extruder. I'm uncertain as to what grade",
"uncertain as to what grade of wire I need to",
"need to solder to it. It being one of the",
"important to find out what sort of wire is the",
"out what sort of wire is the correct kind to",
"it. It being one of the elements of the system",
"to use on it, since heating elements require a lot",
"and it came with the extruder. I'm uncertain as to",
"the hottest, I would think that it would be important",
"that goes in my J-Head extruder. It's grey, and it",
"in my J-Head extruder. It's grey, and it came with",
"J-Head extruder. It's grey, and it came with the extruder.",
"would think that it would be important to find out",
"think that it would be important to find out what",
"the correct kind to use on it, since heating elements",
"my J-Head extruder. It's grey, and it came with the",
"have a large resistor that goes in my J-Head extruder.",
"a large resistor that goes in my J-Head extruder. It's",
"on it, since heating elements require a lot of electricity.",
"it came with the extruder. I'm uncertain as to what",
"elements of the system that heats the hottest, I would",
"lot of electricity. Also does the solder type I use",
"heats the hottest, I would think that it would be"
] |
[
"Is it possible to make disk of titanium and blades",
"expensive is that? Is it cheaper to mill such a",
"Is it possible to 3D print an axial turbine 2",
"4 inches (50 - 100 mm) in radius, capable withstanding",
"axial turbine 2 - 4 inches (50 - 100 mm)",
"blades touch the casing. Do titanium alloys still have this",
"possible to make disk of titanium and blades of Inconel,",
"inches (50 - 100 mm) in radius, capable withstanding temperatures",
"mm) in radius, capable withstanding temperatures about 800 - 1000°C",
"whole piece of alloy? What technologies and materials should be",
"it cheaper to mill such a turbine from a whole",
"for this task? I've read titanium is rarely used in",
"ignite if mechanical failure occurs and rotating blades touch the",
"of titanium and blades of Inconel, and have them welded",
"Inconel, and have them welded (considering heat expansion)? How blades",
"withstanding temperatures about 800 - 1000°C and rotation speeds of",
"task? I've read titanium is rarely used in rapidly rotating",
"that? Is it cheaper to mill such a turbine from",
"120 x 103 rpm? How expensive is that? Is it",
"Do titanium alloys still have this drawback? Is it possible",
"welded (considering heat expansion)? How blades or blisks can be",
"printing? Are there any titanium alloys suitable for this task?",
"of alloy? What technologies and materials should be used? Are",
"if mechanical failure occurs and rotating blades touch the casing.",
"casing. Do titanium alloys still have this drawback? Is it",
"used in rapidly rotating parts due to its ability to",
"and blades of Inconel, and have them welded (considering heat",
"x 103 rpm? How expensive is that? Is it cheaper",
"disk of titanium and blades of Inconel, and have them",
"it possible to make disk of titanium and blades of",
"of Inconel, and have them welded (considering heat expansion)? How",
"to its ability to ignite if mechanical failure occurs and",
"to make disk of titanium and blades of Inconel, and",
"Are Inconel alloys suitable for 3D printing? Are there any",
"heat expansion)? How blades or blisks can be ceramically coated?",
"due to its ability to ignite if mechanical failure occurs",
"Are there any titanium alloys suitable for this task? I've",
"drawback? Is it possible to make disk of titanium and",
"from a whole piece of alloy? What technologies and materials",
"in radius, capable withstanding temperatures about 800 - 1000°C and",
"alloy? What technologies and materials should be used? Are Inconel",
"radius, capable withstanding temperatures about 800 - 1000°C and rotation",
"ability to ignite if mechanical failure occurs and rotating blades",
"3D print an axial turbine 2 - 4 inches (50",
"and materials should be used? Are Inconel alloys suitable for",
"make disk of titanium and blades of Inconel, and have",
"1000°C and rotation speeds of 100 - 120 x 103",
"there any titanium alloys suitable for this task? I've read",
"this drawback? Is it possible to make disk of titanium",
"suitable for 3D printing? Are there any titanium alloys suitable",
"for 3D printing? Are there any titanium alloys suitable for",
"it possible to 3D print an axial turbine 2 -",
"103 rpm? How expensive is that? Is it cheaper to",
"this task? I've read titanium is rarely used in rapidly",
"rarely used in rapidly rotating parts due to its ability",
"temperatures about 800 - 1000°C and rotation speeds of 100",
"any titanium alloys suitable for this task? I've read titanium",
"the casing. Do titanium alloys still have this drawback? Is",
"used? Are Inconel alloys suitable for 3D printing? Are there",
"rpm? How expensive is that? Is it cheaper to mill",
"titanium alloys still have this drawback? Is it possible to",
"2 - 4 inches (50 - 100 mm) in radius,",
"3D printing? Are there any titanium alloys suitable for this",
"rotating blades touch the casing. Do titanium alloys still have",
"speeds of 100 - 120 x 103 rpm? How expensive",
"rotating parts due to its ability to ignite if mechanical",
"rotation speeds of 100 - 120 x 103 rpm? How",
"titanium and blades of Inconel, and have them welded (considering",
"(considering heat expansion)? How blades or blisks can be ceramically",
"100 - 120 x 103 rpm? How expensive is that?",
"- 4 inches (50 - 100 mm) in radius, capable",
"piece of alloy? What technologies and materials should be used?",
"is rarely used in rapidly rotating parts due to its",
"in rapidly rotating parts due to its ability to ignite",
"and have them welded (considering heat expansion)? How blades or",
"should be used? Are Inconel alloys suitable for 3D printing?",
"and rotating blades touch the casing. Do titanium alloys still",
"What technologies and materials should be used? Are Inconel alloys",
"occurs and rotating blades touch the casing. Do titanium alloys",
"print an axial turbine 2 - 4 inches (50 -",
"- 1000°C and rotation speeds of 100 - 120 x",
"cheaper to mill such a turbine from a whole piece",
"capable withstanding temperatures about 800 - 1000°C and rotation speeds",
"and rotation speeds of 100 - 120 x 103 rpm?",
"is that? Is it cheaper to mill such a turbine",
"Is it cheaper to mill such a turbine from a",
"- 100 mm) in radius, capable withstanding temperatures about 800",
"Inconel alloys suitable for 3D printing? Are there any titanium",
"100 mm) in radius, capable withstanding temperatures about 800 -",
"(50 - 100 mm) in radius, capable withstanding temperatures about",
"alloys still have this drawback? Is it possible to make",
"turbine from a whole piece of alloy? What technologies and",
"be used? Are Inconel alloys suitable for 3D printing? Are",
"blades of Inconel, and have them welded (considering heat expansion)?",
"to ignite if mechanical failure occurs and rotating blades touch",
"its ability to ignite if mechanical failure occurs and rotating",
"a whole piece of alloy? What technologies and materials should",
"expansion)? How blades or blisks can be ceramically coated? Thank",
"suitable for this task? I've read titanium is rarely used",
"have them welded (considering heat expansion)? How blades or blisks",
"about 800 - 1000°C and rotation speeds of 100 -",
"rapidly rotating parts due to its ability to ignite if",
"of 100 - 120 x 103 rpm? How expensive is",
"such a turbine from a whole piece of alloy? What",
"mechanical failure occurs and rotating blades touch the casing. Do",
"materials should be used? Are Inconel alloys suitable for 3D",
"failure occurs and rotating blades touch the casing. Do titanium",
"How blades or blisks can be ceramically coated? Thank you!",
"a turbine from a whole piece of alloy? What technologies",
"possible to 3D print an axial turbine 2 - 4",
"have this drawback? Is it possible to make disk of",
"alloys suitable for this task? I've read titanium is rarely",
"I've read titanium is rarely used in rapidly rotating parts",
"an axial turbine 2 - 4 inches (50 - 100",
"titanium alloys suitable for this task? I've read titanium is",
"turbine 2 - 4 inches (50 - 100 mm) in",
"to mill such a turbine from a whole piece of",
"titanium is rarely used in rapidly rotating parts due to",
"to 3D print an axial turbine 2 - 4 inches",
"800 - 1000°C and rotation speeds of 100 - 120",
"still have this drawback? Is it possible to make disk",
"touch the casing. Do titanium alloys still have this drawback?",
"technologies and materials should be used? Are Inconel alloys suitable",
"How expensive is that? Is it cheaper to mill such",
"read titanium is rarely used in rapidly rotating parts due",
"parts due to its ability to ignite if mechanical failure",
"- 120 x 103 rpm? How expensive is that? Is",
"mill such a turbine from a whole piece of alloy?",
"alloys suitable for 3D printing? Are there any titanium alloys",
"them welded (considering heat expansion)? How blades or blisks can"
] |
[
"to 1.6 mm, (4 layers) and the wall features here",
"far as I know, not drawn as a hollow. I",
"some small labels with embossed lettering. Base is 1.5 mm,",
"a perimeter protruding by another 1 mm. After printing, I",
"there is a setting that I've missed (I can appreciate",
"with letters and a perimeter protruding by another 1 mm.",
"<https://github.com/Ultimaker/Cura/issues/1303> (and I also understand a workaround now, just need",
"that I've missed (I can appreciate that maybe this is",
"make some small labels with embossed lettering. Base is 1.5",
"there is no infill at the top. Presumably there is",
"layer, all I get is an inner and outer wall",
"is model dependant). Layers are 0.2 mm, top and bottom",
"is OK, with 4 layers, but there is no infill",
"are 0.2 mm, top and bottom set to 4 layers.",
"After printing, I realised that Cura is not giving me",
"mm, (4 layers) and the wall features here are 1",
"layer](https://i.stack.imgur.com/Hri17.png)](https://i.stack.imgur.com/Hri17.png) The base is OK, with 4 layers, but there",
"mm. After printing, I realised that Cura is not giving",
"dependant). Layers are 0.2 mm, top and bottom set to",
"to 4 layers. I had walls set to 1.6 mm,",
"here are 1 mm (i.e. 2.5x the nozzle). The features",
"lettering. Base is 1.5 mm, with letters and a perimeter",
"get is an inner and outer wall for the perimeter",
"realised that Cura is not giving me a top layer,",
"that Cura is not giving me a top layer, all",
"The base is OK, with 4 layers, but there is",
"base is OK, with 4 layers, but there is no",
"the slicing which is model dependant). Layers are 0.2 mm,",
"2.5x the nozzle). The features are solid so far as",
"had walls set to 1.6 mm, (4 layers) and the",
"for the perimeter and the lettering: [](https://i.stack.imgur.com/Hri17.png) The base is OK, with 4",
"1 mm (i.e. 2.5x the nozzle). The features are solid",
"Presumably there is a setting that I've missed (I can",
"and bottom set to 4 layers. I had walls set",
"(I can appreciate that maybe this is a detail to",
"features here are 1 mm (i.e. 2.5x the nozzle). The",
"(and I also understand a workaround now, just need to",
"also understand a workaround now, just need to write up",
"I've just tried to make some small labels with embossed",
"as I know, not drawn as a hollow. I found",
"infill at the top. Presumably there is a setting that",
"me a top layer, all I get is an inner",
"Cura is not giving me a top layer, all I",
"a workaround now, just need to write up an answer).",
"and a perimeter protruding by another 1 mm. After printing,",
"[](https://i.stack.imgur.com/Hri17.png) The base is",
"this is a detail to the slicing which is model",
"drawn as a hollow. I found a relevant bug for",
"OK, with 4 layers, but there is no infill at",
"labels with embossed lettering. Base is 1.5 mm, with letters",
"1 mm. After printing, I realised that Cura is not",
"with 4 layers, but there is no infill at the",
"a hollow. I found a relevant bug for Cura: <https://github.com/Ultimaker/Cura/issues/1303>",
"is not giving me a top layer, all I get",
"I had walls set to 1.6 mm, (4 layers) and",
"mm, with letters and a perimeter protruding by another 1",
"is a setting that I've missed (I can appreciate that",
"walls set to 1.6 mm, (4 layers) and the wall",
"know, not drawn as a hollow. I found a relevant",
"understand a workaround now, just need to write up an",
"protruding by another 1 mm. After printing, I realised that",
"the perimeter and the lettering: [](https://i.stack.imgur.com/Hri17.png) The base is OK, with 4 layers, but",
"wall for the perimeter and the lettering: [](https://i.stack.imgur.com/Hri17.png) The base is OK, with 4 layers,",
"and outer wall for the perimeter and the lettering: [](https://i.stack.imgur.com/Hri17.png)",
"bug for Cura: <https://github.com/Ultimaker/Cura/issues/1303> (and I also understand a workaround",
"embossed lettering. Base is 1.5 mm, with letters and a",
"printing, I realised that Cura is not giving me a",
"missed (I can appreciate that maybe this is a detail",
"wall features here are 1 mm (i.e. 2.5x the nozzle).",
"are 1 mm (i.e. 2.5x the nozzle). The features are",
"Cura: <https://github.com/Ultimaker/Cura/issues/1303> (and I also understand a workaround now, just",
"mm (i.e. 2.5x the nozzle). The features are solid so",
"4 layers, but there is no infill at the top.",
"inner and outer wall for the perimeter and the lettering:",
"setting that I've missed (I can appreciate that maybe this",
"I know, not drawn as a hollow. I found a",
"bottom set to 4 layers. I had walls set to",
"relevant bug for Cura: <https://github.com/Ultimaker/Cura/issues/1303> (and I also understand a",
"to the slicing which is model dependant). Layers are 0.2",
"hollow. I found a relevant bug for Cura: <https://github.com/Ultimaker/Cura/issues/1303> (and",
"but there is no infill at the top. Presumably there",
"set to 4 layers. I had walls set to 1.6",
"a top layer, all I get is an inner and",
"slicing which is model dependant). Layers are 0.2 mm, top",
"appreciate that maybe this is a detail to the slicing",
"showing missing infill in top layer](https://i.stack.imgur.com/Hri17.png)](https://i.stack.imgur.com/Hri17.png) The base is OK,",
"nozzle). The features are solid so far as I know,",
"mm, top and bottom set to 4 layers. I had",
"are solid so far as I know, not drawn as",
"is an inner and outer wall for the perimeter and",
"set to 1.6 mm, (4 layers) and the wall features",
"the wall features here are 1 mm (i.e. 2.5x the",
"perimeter protruding by another 1 mm. After printing, I realised",
"detail to the slicing which is model dependant). Layers are",
"another 1 mm. After printing, I realised that Cura is",
"just tried to make some small labels with embossed lettering.",
"not giving me a top layer, all I get is",
"the nozzle). The features are solid so far as I",
"small labels with embossed lettering. Base is 1.5 mm, with",
"tried to make some small labels with embossed lettering. Base",
"top layer, all I get is an inner and outer",
"model dependant). Layers are 0.2 mm, top and bottom set",
"Layers are 0.2 mm, top and bottom set to 4",
"layers) and the wall features here are 1 mm (i.e.",
"the top. Presumably there is a setting that I've missed",
"4 layers. I had walls set to 1.6 mm, (4",
"1.6 mm, (4 layers) and the wall features here are",
"The features are solid so far as I know, not",
"lettering: [](https://i.stack.imgur.com/Hri17.png) The base",
"letters and a perimeter protruding by another 1 mm. After",
"can appreciate that maybe this is a detail to the",
"to make some small labels with embossed lettering. Base is",
"which is model dependant). Layers are 0.2 mm, top and",
"features are solid so far as I know, not drawn",
"Base is 1.5 mm, with letters and a perimeter protruding",
"top and bottom set to 4 layers. I had walls",
"outer wall for the perimeter and the lettering: [](https://i.stack.imgur.com/Hri17.png) The",
"found a relevant bug for Cura: <https://github.com/Ultimaker/Cura/issues/1303> (and I also",
"I get is an inner and outer wall for the",
"0.2 mm, top and bottom set to 4 layers. I",
"missing infill in top layer](https://i.stack.imgur.com/Hri17.png)](https://i.stack.imgur.com/Hri17.png) The base is OK, with",
"is no infill at the top. Presumably there is a",
"I also understand a workaround now, just need to write"
] |
[
"electromagnetic interference or other problems, and how I should pair",
"(2 wires) 4. [Z-axis auto-leveling probe](https://printrbot.com/shop/auto-leveling-probe-2) (3 wires) 5. [NEMA",
"cable for parts 1-4, which form a logical unit (and",
"online on whether or not this would be feasible. I",
"wires) 5. [NEMA 17 extruder motor](https://docs.google.com/spreadsheets/d/1Q6nW_lToPZe6Kou6VbDMoQ3sFleCJ02XV0y4piXL_Fg/pubhtml) (4 wires) 6. [50mm",
"wires) 6. [50mm part cooling fan](https://www.amazon.co.uk/gp/product/B00MJUD1DW) (2 wires) **[cable A]**",
"considering using [CAT6](https://en.wikipedia.org/wiki/Category_6_cable) cables to connect my printer's extruder assembly",
"[CAT6](https://en.wikipedia.org/wiki/Category_6_cable) cables to connect my printer's extruder assembly to the",
"fan](https://www.amazon.co.uk/gp/product/B00MJUD1DW) (2 wires) **[cable A]** I imagine I would use",
"about electromagnetic interference or other problems, and how I should",
"cables to connect my printer's extruder assembly to the control",
"wires) 3. [30mm hotend fan](http://e3d-online.com/E3D-v6/Spares/30x30x10mm-12v-DC-Fan) (2 wires) 4. [Z-axis auto-leveling",
"parts 1-4, which form a logical unit (and in the",
"6. There will be two spare wires, so I could",
"(4 wires) 6. [50mm part cooling fan](https://www.amazon.co.uk/gp/product/B00MJUD1DW) (2 wires) **[cable",
"There will be two spare wires, so I could potentially",
"or other problems, and how I should pair up the",
"module). I've been given to understand that power for the",
"the control board. They seem like an elegant solution, but",
"not this would be feasible. I would like to know",
"wires) 2. [E3D thermistor cartridge](http://e3d-online.com/E3D-v6/Spares/Thermistor-Cartridge) (2 wires) 3. [30mm hotend",
"4. [Z-axis auto-leveling probe](https://printrbot.com/shop/auto-leveling-probe-2) (3 wires) 5. [NEMA 17 extruder",
"6. [50mm part cooling fan](https://www.amazon.co.uk/gp/product/B00MJUD1DW) (2 wires) **[cable A]** I",
"two spare wires, so I could potentially double the bandwidth",
"power for the fan can be spliced from the z-probe",
"I've read conflicting opinions online on whether or not this",
"to know if CAT6 cables can handle the required current,",
"worried about electromagnetic interference or other problems, and how I",
"can be spliced from the z-probe or heater cartridge, so",
"[30mm hotend fan](http://e3d-online.com/E3D-v6/Spares/30x30x10mm-12v-DC-Fan) (2 wires) 4. [Z-axis auto-leveling probe](https://printrbot.com/shop/auto-leveling-probe-2) (3",
"CAT6 cable for parts 1-4, which form a logical unit",
"into a removable module). I've been given to understand that",
"board. They seem like an elegant solution, but I've read",
"if CAT6 cables can handle the required current, whether I",
"would like to know if CAT6 cables can handle the",
"CAT6 cable for parts 5 and 6. There will be",
"[E3D heater cartridge](http://e3d-online.com/Heater-Cartridge-12v-40w) (2 wires) 2. [E3D thermistor cartridge](http://e3d-online.com/E3D-v6/Spares/Thermistor-Cartridge) (2",
"so 8 wires should be enough. **[cable B]** I would",
"8 wires should be enough. **[cable B]** I would use",
"the required current, whether I should be worried about electromagnetic",
"relevant parts: 1. [E3D heater cartridge](http://e3d-online.com/Heater-Cartridge-12v-40w) (2 wires) 2. [E3D",
"(2 wires) 3. [30mm hotend fan](http://e3d-online.com/E3D-v6/Spares/30x30x10mm-12v-DC-Fan) (2 wires) 4. [Z-axis",
"seem like an elegant solution, but I've read conflicting opinions",
"a removable module). I've been given to understand that power",
"use a second CAT6 cable for parts 5 and 6.",
"from the z-probe or heater cartridge, so 8 wires should",
"wires should be enough. **[cable B]** I would use a",
"I've been given to understand that power for the fan",
"so I could potentially double the bandwidth for the motor.",
"30cm max. Here are the relevant parts: 1. [E3D heater",
"combine them into a removable module). I've been given to",
"wires. Cable length would be 30cm max. Here are the",
"1. [E3D heater cartridge](http://e3d-online.com/Heater-Cartridge-12v-40w) (2 wires) 2. [E3D thermistor cartridge](http://e3d-online.com/E3D-v6/Spares/Thermistor-Cartridge)",
"fan](http://e3d-online.com/E3D-v6/Spares/30x30x10mm-12v-DC-Fan) (2 wires) 4. [Z-axis auto-leveling probe](https://printrbot.com/shop/auto-leveling-probe-2) (3 wires) 5.",
"thermistor cartridge](http://e3d-online.com/E3D-v6/Spares/Thermistor-Cartridge) (2 wires) 3. [30mm hotend fan](http://e3d-online.com/E3D-v6/Spares/30x30x10mm-12v-DC-Fan) (2 wires)",
"cartridge](http://e3d-online.com/Heater-Cartridge-12v-40w) (2 wires) 2. [E3D thermistor cartridge](http://e3d-online.com/E3D-v6/Spares/Thermistor-Cartridge) (2 wires) 3.",
"(3 wires) 5. [NEMA 17 extruder motor](https://docs.google.com/spreadsheets/d/1Q6nW_lToPZe6Kou6VbDMoQ3sFleCJ02XV0y4piXL_Fg/pubhtml) (4 wires) 6.",
"other problems, and how I should pair up the wires.",
"my printer's extruder assembly to the control board. They seem",
"would use one CAT6 cable for parts 1-4, which form",
"can handle the required current, whether I should be worried",
"extruder motor](https://docs.google.com/spreadsheets/d/1Q6nW_lToPZe6Kou6VbDMoQ3sFleCJ02XV0y4piXL_Fg/pubhtml) (4 wires) 6. [50mm part cooling fan](https://www.amazon.co.uk/gp/product/B00MJUD1DW) (2",
"that power for the fan can be spliced from the",
"connect my printer's extruder assembly to the control board. They",
"be feasible. I would like to know if CAT6 cables",
"the wires. Cable length would be 30cm max. Here are",
"which form a logical unit (and in the future I",
"I would like to know if CAT6 cables can handle",
"to the control board. They seem like an elegant solution,",
"pair up the wires. Cable length would be 30cm max.",
"(2 wires) **[cable A]** I imagine I would use one",
"are the relevant parts: 1. [E3D heater cartridge](http://e3d-online.com/Heater-Cartridge-12v-40w) (2 wires)",
"heater cartridge, so 8 wires should be enough. **[cable B]**",
"cartridge](http://e3d-online.com/E3D-v6/Spares/Thermistor-Cartridge) (2 wires) 3. [30mm hotend fan](http://e3d-online.com/E3D-v6/Spares/30x30x10mm-12v-DC-Fan) (2 wires) 4.",
"should be worried about electromagnetic interference or other problems, and",
"unit (and in the future I might combine them into",
"wires, so I could potentially double the bandwidth for the",
"length would be 30cm max. Here are the relevant parts:",
"spare wires, so I could potentially double the bandwidth for",
"a logical unit (and in the future I might combine",
"but I've read conflicting opinions online on whether or not",
"one CAT6 cable for parts 1-4, which form a logical",
"the z-probe or heater cartridge, so 8 wires should be",
"would be 30cm max. Here are the relevant parts: 1.",
"fan can be spliced from the z-probe or heater cartridge,",
"They seem like an elegant solution, but I've read conflicting",
"[50mm part cooling fan](https://www.amazon.co.uk/gp/product/B00MJUD1DW) (2 wires) **[cable A]** I imagine",
"heater cartridge](http://e3d-online.com/Heater-Cartridge-12v-40w) (2 wires) 2. [E3D thermistor cartridge](http://e3d-online.com/E3D-v6/Spares/Thermistor-Cartridge) (2 wires)",
"be 30cm max. Here are the relevant parts: 1. [E3D",
"I would use a second CAT6 cable for parts 5",
"cooling fan](https://www.amazon.co.uk/gp/product/B00MJUD1DW) (2 wires) **[cable A]** I imagine I would",
"will be two spare wires, so I could potentially double",
"CAT6 cables can handle the required current, whether I should",
"be two spare wires, so I could potentially double the",
"imagine I would use one CAT6 cable for parts 1-4,",
"cables can handle the required current, whether I should be",
"I should pair up the wires. Cable length would be",
"be enough. **[cable B]** I would use a second CAT6",
"5 and 6. There will be two spare wires, so",
"handle the required current, whether I should be worried about",
"**[cable B]** I would use a second CAT6 cable for",
"printer's extruder assembly to the control board. They seem like",
"know if CAT6 cables can handle the required current, whether",
"parts: 1. [E3D heater cartridge](http://e3d-online.com/Heater-Cartridge-12v-40w) (2 wires) 2. [E3D thermistor",
"A]** I imagine I would use one CAT6 cable for",
"use one CAT6 cable for parts 1-4, which form a",
"motor](https://docs.google.com/spreadsheets/d/1Q6nW_lToPZe6Kou6VbDMoQ3sFleCJ02XV0y4piXL_Fg/pubhtml) (4 wires) 6. [50mm part cooling fan](https://www.amazon.co.uk/gp/product/B00MJUD1DW) (2 wires)",
"Here are the relevant parts: 1. [E3D heater cartridge](http://e3d-online.com/Heater-Cartridge-12v-40w) (2",
"2. [E3D thermistor cartridge](http://e3d-online.com/E3D-v6/Spares/Thermistor-Cartridge) (2 wires) 3. [30mm hotend fan](http://e3d-online.com/E3D-v6/Spares/30x30x10mm-12v-DC-Fan)",
"to understand that power for the fan can be spliced",
"conflicting opinions online on whether or not this would be",
"whether or not this would be feasible. I would like",
"wires) 4. [Z-axis auto-leveling probe](https://printrbot.com/shop/auto-leveling-probe-2) (3 wires) 5. [NEMA 17",
"[NEMA 17 extruder motor](https://docs.google.com/spreadsheets/d/1Q6nW_lToPZe6Kou6VbDMoQ3sFleCJ02XV0y4piXL_Fg/pubhtml) (4 wires) 6. [50mm part cooling",
"a second CAT6 cable for parts 5 and 6. There",
"required current, whether I should be worried about electromagnetic interference",
"cable for parts 5 and 6. There will be two",
"solution, but I've read conflicting opinions online on whether or",
"like an elegant solution, but I've read conflicting opinions online",
"(and in the future I might combine them into a",
"and how I should pair up the wires. Cable length",
"using [CAT6](https://en.wikipedia.org/wiki/Category_6_cable) cables to connect my printer's extruder assembly to",
"elegant solution, but I've read conflicting opinions online on whether",
"how I should pair up the wires. Cable length would",
"auto-leveling probe](https://printrbot.com/shop/auto-leveling-probe-2) (3 wires) 5. [NEMA 17 extruder motor](https://docs.google.com/spreadsheets/d/1Q6nW_lToPZe6Kou6VbDMoQ3sFleCJ02XV0y4piXL_Fg/pubhtml) (4",
"problems, and how I should pair up the wires. Cable",
"logical unit (and in the future I might combine them",
"be spliced from the z-probe or heater cartridge, so 8",
"second CAT6 cable for parts 5 and 6. There will",
"this would be feasible. I would like to know if",
"3. [30mm hotend fan](http://e3d-online.com/E3D-v6/Spares/30x30x10mm-12v-DC-Fan) (2 wires) 4. [Z-axis auto-leveling probe](https://printrbot.com/shop/auto-leveling-probe-2)",
"I should be worried about electromagnetic interference or other problems,",
"up the wires. Cable length would be 30cm max. Here",
"I'm considering using [CAT6](https://en.wikipedia.org/wiki/Category_6_cable) cables to connect my printer's extruder",
"B]** I would use a second CAT6 cable for parts",
"feasible. I would like to know if CAT6 cables can",
"future I might combine them into a removable module). I've",
"should pair up the wires. Cable length would be 30cm",
"or heater cartridge, so 8 wires should be enough. **[cable",
"control board. They seem like an elegant solution, but I've",
"opinions online on whether or not this would be feasible.",
"would use a second CAT6 cable for parts 5 and",
"for parts 1-4, which form a logical unit (and in",
"be worried about electromagnetic interference or other problems, and how",
"understand that power for the fan can be spliced from",
"spliced from the z-probe or heater cartridge, so 8 wires",
"on whether or not this would be feasible. I would",
"should be enough. **[cable B]** I would use a second",
"enough. **[cable B]** I would use a second CAT6 cable",
"read conflicting opinions online on whether or not this would",
"like to know if CAT6 cables can handle the required",
"probe](https://printrbot.com/shop/auto-leveling-probe-2) (3 wires) 5. [NEMA 17 extruder motor](https://docs.google.com/spreadsheets/d/1Q6nW_lToPZe6Kou6VbDMoQ3sFleCJ02XV0y4piXL_Fg/pubhtml) (4 wires)",
"interference or other problems, and how I should pair up",
"the future I might combine them into a removable module).",
"**[cable A]** I imagine I would use one CAT6 cable",
"removable module). I've been given to understand that power for",
"given to understand that power for the fan can be",
"to connect my printer's extruder assembly to the control board.",
"assembly to the control board. They seem like an elegant",
"extruder assembly to the control board. They seem like an",
"or not this would be feasible. I would like to",
"form a logical unit (and in the future I might",
"17 extruder motor](https://docs.google.com/spreadsheets/d/1Q6nW_lToPZe6Kou6VbDMoQ3sFleCJ02XV0y4piXL_Fg/pubhtml) (4 wires) 6. [50mm part cooling fan](https://www.amazon.co.uk/gp/product/B00MJUD1DW)",
"them into a removable module). I've been given to understand",
"5. [NEMA 17 extruder motor](https://docs.google.com/spreadsheets/d/1Q6nW_lToPZe6Kou6VbDMoQ3sFleCJ02XV0y4piXL_Fg/pubhtml) (4 wires) 6. [50mm part",
"max. Here are the relevant parts: 1. [E3D heater cartridge](http://e3d-online.com/Heater-Cartridge-12v-40w)",
"wires) **[cable A]** I imagine I would use one CAT6",
"[Z-axis auto-leveling probe](https://printrbot.com/shop/auto-leveling-probe-2) (3 wires) 5. [NEMA 17 extruder motor](https://docs.google.com/spreadsheets/d/1Q6nW_lToPZe6Kou6VbDMoQ3sFleCJ02XV0y4piXL_Fg/pubhtml)",
"[E3D thermistor cartridge](http://e3d-online.com/E3D-v6/Spares/Thermistor-Cartridge) (2 wires) 3. [30mm hotend fan](http://e3d-online.com/E3D-v6/Spares/30x30x10mm-12v-DC-Fan) (2",
"(2 wires) 2. [E3D thermistor cartridge](http://e3d-online.com/E3D-v6/Spares/Thermistor-Cartridge) (2 wires) 3. [30mm",
"been given to understand that power for the fan can",
"parts 5 and 6. There will be two spare wires,",
"would be feasible. I would like to know if CAT6",
"an elegant solution, but I've read conflicting opinions online on",
"cartridge, so 8 wires should be enough. **[cable B]** I",
"Cable length would be 30cm max. Here are the relevant",
"1-4, which form a logical unit (and in the future",
"might combine them into a removable module). I've been given",
"z-probe or heater cartridge, so 8 wires should be enough.",
"part cooling fan](https://www.amazon.co.uk/gp/product/B00MJUD1DW) (2 wires) **[cable A]** I imagine I",
"whether I should be worried about electromagnetic interference or other",
"I would use one CAT6 cable for parts 1-4, which",
"for the fan can be spliced from the z-probe or",
"the fan can be spliced from the z-probe or heater",
"and 6. There will be two spare wires, so I",
"hotend fan](http://e3d-online.com/E3D-v6/Spares/30x30x10mm-12v-DC-Fan) (2 wires) 4. [Z-axis auto-leveling probe](https://printrbot.com/shop/auto-leveling-probe-2) (3 wires)",
"for parts 5 and 6. There will be two spare",
"I imagine I would use one CAT6 cable for parts",
"I might combine them into a removable module). I've been",
"current, whether I should be worried about electromagnetic interference or",
"in the future I might combine them into a removable",
"the relevant parts: 1. [E3D heater cartridge](http://e3d-online.com/Heater-Cartridge-12v-40w) (2 wires) 2."
] |
[
"steps instead. I made some footage, [Reprap Prusa Mendel 3d",
"built from cheaper materials, and immediately after the deal I",
"I fixed the majority of them, but don't know what",
"holds this parts together (in the left bottom corner of",
"this problem was to slacken the bolt which holds this",
"moving back and forth with small steps instead. I made",
"similar problem before. If so, please tell me what to",
"forth with small steps instead. I made some footage, [Reprap",
"modified to be built from cheaper materials, and immediately after",
"please tell me what to do to make it work",
"me what to do to make it work as it",
"don't know what the reason of the strange extruder behavior",
"that someone has met a similar problem before. If so,",
"I hope this is an appropriate kind of question here.",
"tell me what to do to make it work as",
"this parts together (in the left bottom corner of the",
"and forth with small steps instead. I made some footage,",
"fixed the majority of them, but don't know what the",
"strange extruder behavior is: The stepper motor is not rotating",
"3d printer extruder problem](https://www.youtube.com/watch?v=OcF9qxtxIO0), hoping that someone has met a",
"be built from cheaper materials, and immediately after the deal",
"video), but that did not help. Any ideas are very",
"is: The stepper motor is not rotating while extruding filament,",
"Prusa Mendel 3 printer, modified to be built from cheaper",
"rotating while extruding filament, it's moving back and forth with",
"after the deal I got various problems. I fixed the",
"that did not help. Any ideas are very welcomed. Thanks",
"printer extruder problem](https://www.youtube.com/watch?v=OcF9qxtxIO0), hoping that someone has met a similar",
"motor is not rotating while extruding filament, it's moving back",
"reason of the strange extruder behavior is: The stepper motor",
"make it work as it should. The obvious option while",
"problem before. If so, please tell me what to do",
"extruding filament, it's moving back and forth with small steps",
"your time. I hope this is an appropriate kind of",
"The obvious option while encountering this problem was to slacken",
"bought a self-made Reprap Prusa Mendel 3 printer, modified to",
"the video), but that did not help. Any ideas are",
"encountering this problem was to slacken the bolt which holds",
"from cheaper materials, and immediately after the deal I got",
"back and forth with small steps instead. I made some",
"did not help. Any ideas are very welcomed. Thanks for",
"small steps instead. I made some footage, [Reprap Prusa Mendel",
"bottom corner of the video), but that did not help.",
"very welcomed. Thanks for your time. I hope this is",
"to do to make it work as it should. The",
"Thanks for your time. I hope this is an appropriate",
"filament, it's moving back and forth with small steps instead.",
"Prusa Mendel 3d printer extruder problem](https://www.youtube.com/watch?v=OcF9qxtxIO0), hoping that someone has",
"of the video), but that did not help. Any ideas",
"option while encountering this problem was to slacken the bolt",
"what the reason of the strange extruder behavior is: The",
"ideas are very welcomed. Thanks for your time. I hope",
"to slacken the bolt which holds this parts together (in",
"welcomed. Thanks for your time. I hope this is an",
"are very welcomed. Thanks for your time. I hope this",
"so, please tell me what to do to make it",
"for your time. I hope this is an appropriate kind",
"got various problems. I fixed the majority of them, but",
"of them, but don't know what the reason of the",
"the bolt which holds this parts together (in the left",
"not help. Any ideas are very welcomed. Thanks for your",
"materials, and immediately after the deal I got various problems.",
"self-made Reprap Prusa Mendel 3 printer, modified to be built",
"the majority of them, but don't know what the reason",
"is not rotating while extruding filament, it's moving back and",
"the strange extruder behavior is: The stepper motor is not",
"was to slacken the bolt which holds this parts together",
"while encountering this problem was to slacken the bolt which",
"made some footage, [Reprap Prusa Mendel 3d printer extruder problem](https://www.youtube.com/watch?v=OcF9qxtxIO0),",
"help. Any ideas are very welcomed. Thanks for your time.",
"but don't know what the reason of the strange extruder",
"as it should. The obvious option while encountering this problem",
"I made some footage, [Reprap Prusa Mendel 3d printer extruder",
"the deal I got various problems. I fixed the majority",
"the left bottom corner of the video), but that did",
"3 printer, modified to be built from cheaper materials, and",
"parts together (in the left bottom corner of the video),",
"while extruding filament, it's moving back and forth with small",
"it's moving back and forth with small steps instead. I",
"behavior is: The stepper motor is not rotating while extruding",
"bolt which holds this parts together (in the left bottom",
"various problems. I fixed the majority of them, but don't",
"instead. I made some footage, [Reprap Prusa Mendel 3d printer",
"Reprap Prusa Mendel 3 printer, modified to be built from",
"a self-made Reprap Prusa Mendel 3 printer, modified to be",
"before. If so, please tell me what to do to",
"do to make it work as it should. The obvious",
"someone has met a similar problem before. If so, please",
"what to do to make it work as it should.",
"slacken the bolt which holds this parts together (in the",
"hoping that someone has met a similar problem before. If",
"deal I got various problems. I fixed the majority of",
"immediately after the deal I got various problems. I fixed",
"together (in the left bottom corner of the video), but",
"extruder behavior is: The stepper motor is not rotating while",
"should. The obvious option while encountering this problem was to",
"corner of the video), but that did not help. Any",
"Mendel 3 printer, modified to be built from cheaper materials,",
"(in the left bottom corner of the video), but that",
"met a similar problem before. If so, please tell me",
"problems. I fixed the majority of them, but don't know",
"Mendel 3d printer extruder problem](https://www.youtube.com/watch?v=OcF9qxtxIO0), hoping that someone has met",
"[Reprap Prusa Mendel 3d printer extruder problem](https://www.youtube.com/watch?v=OcF9qxtxIO0), hoping that someone",
"problem](https://www.youtube.com/watch?v=OcF9qxtxIO0), hoping that someone has met a similar problem before.",
"majority of them, but don't know what the reason of",
"left bottom corner of the video), but that did not",
"footage, [Reprap Prusa Mendel 3d printer extruder problem](https://www.youtube.com/watch?v=OcF9qxtxIO0), hoping that",
"obvious option while encountering this problem was to slacken the",
"I got various problems. I fixed the majority of them,",
"it work as it should. The obvious option while encountering",
"which holds this parts together (in the left bottom corner",
"time. I hope this is an appropriate kind of question",
"I bought a self-made Reprap Prusa Mendel 3 printer, modified",
"with small steps instead. I made some footage, [Reprap Prusa",
"to make it work as it should. The obvious option",
"and immediately after the deal I got various problems. I",
"The stepper motor is not rotating while extruding filament, it's",
"Any ideas are very welcomed. Thanks for your time. I",
"stepper motor is not rotating while extruding filament, it's moving",
"printer, modified to be built from cheaper materials, and immediately",
"has met a similar problem before. If so, please tell",
"to be built from cheaper materials, and immediately after the",
"cheaper materials, and immediately after the deal I got various",
"If so, please tell me what to do to make",
"the reason of the strange extruder behavior is: The stepper",
"not rotating while extruding filament, it's moving back and forth",
"but that did not help. Any ideas are very welcomed.",
"a similar problem before. If so, please tell me what",
"extruder problem](https://www.youtube.com/watch?v=OcF9qxtxIO0), hoping that someone has met a similar problem",
"problem was to slacken the bolt which holds this parts",
"them, but don't know what the reason of the strange",
"know what the reason of the strange extruder behavior is:",
"of the strange extruder behavior is: The stepper motor is",
"some footage, [Reprap Prusa Mendel 3d printer extruder problem](https://www.youtube.com/watch?v=OcF9qxtxIO0), hoping",
"work as it should. The obvious option while encountering this",
"it should. The obvious option while encountering this problem was"
] |
[
"actual print, without holes](https://i.stack.imgur.com/RrlBC.jpg)](https://i.stack.imgur.com/RrlBC.jpg) What can be done to be",
"holes in the middle](https://i.stack.imgur.com/UMD0V.jpg)](https://i.stack.imgur.com/UMD0V.jpg) However, the output is an object",
"M3D printer and loaded an STL design with holes in",
"middle: [](https://i.stack.imgur.com/UMD0V.jpg)",
"design with holes in the middle: [](https://i.stack.imgur.com/RrlBC.jpg) What",
"first few layers of actual print, without holes](https://i.stack.imgur.com/RrlBC.jpg)](https://i.stack.imgur.com/RrlBC.jpg) What can",
"holes](https://i.stack.imgur.com/RrlBC.jpg)](https://i.stack.imgur.com/RrlBC.jpg) What can be done to be able to print",
"is an object without holes (so I stopped the printing):",
"without holes](https://i.stack.imgur.com/RrlBC.jpg)](https://i.stack.imgur.com/RrlBC.jpg) What can be done to be able to",
"an object without holes (so I stopped the printing): [](https://i.stack.imgur.com/RrlBC.jpg) What can be",
"output is an object without holes (so I stopped the",
"am using an M3D printer and loaded an STL design",
"What can be done to be able to print with",
"However, the output is an object without holes (so I",
"of actual print, without holes](https://i.stack.imgur.com/RrlBC.jpg)](https://i.stack.imgur.com/RrlBC.jpg) What can be done to",
"print, without holes](https://i.stack.imgur.com/RrlBC.jpg)](https://i.stack.imgur.com/RrlBC.jpg) What can be done to be able",
"of the first few layers of actual print, without holes](https://i.stack.imgur.com/RrlBC.jpg)](https://i.stack.imgur.com/RrlBC.jpg)",
"design with holes in the middle](https://i.stack.imgur.com/UMD0V.jpg)](https://i.stack.imgur.com/UMD0V.jpg) However, the output is",
"in the middle: [](https://i.stack.imgur.com/UMD0V.jpg) However, the output is an object without holes",
"[](https://i.stack.imgur.com/UMD0V.jpg) However, the output is an",
"I am using an M3D printer and loaded an STL",
"(so I stopped the printing): [](https://i.stack.imgur.com/RrlBC.jpg) What can be done",
"stopped the printing): [](https://i.stack.imgur.com/UMD0V.jpg) However, the output",
"and loaded an STL design with holes in the middle:",
"the output is an object without holes (so I stopped",
"can be done to be able to print with holes?",
"using an M3D printer and loaded an STL design with",
"[](https://i.stack.imgur.com/UMD0V.jpg) However,",
"the middle: [](https://i.stack.imgur.com/UMD0V.jpg) However, the",
"in the middle](https://i.stack.imgur.com/UMD0V.jpg)](https://i.stack.imgur.com/UMD0V.jpg) However, the output is an object without",
"middle](https://i.stack.imgur.com/UMD0V.jpg)](https://i.stack.imgur.com/UMD0V.jpg) However, the output is an object without holes (so",
"loaded an STL design with holes in the middle: [![Screenshot",
"holes (so I stopped the printing): [![Photo of the first",
"with holes in the middle: [![Screenshot of STL design with",
"I stopped the printing): [![Photo of the first few layers",
"printer and loaded an STL design with holes in the",
"without holes (so I stopped the printing): [![Photo of the"
] |
[
"an M4 Screw and nut? I have found only an",
"3D design (STEP or STL) of an M4 Screw and",
"have found only an M3 on Thingiverse: [M3 Bolt](http://www.thingiverse.com/thing:729842) by",
"a free 3D design (STEP or STL) of an M4",
"know where I can get a free 3D design (STEP",
"and nut? I have found only an M3 on Thingiverse:",
"can get a free 3D design (STEP or STL) of",
"get a free 3D design (STEP or STL) of an",
"of an M4 Screw and nut? I have found only",
"or STL) of an M4 Screw and nut? I have",
"(STEP or STL) of an M4 Screw and nut? I",
"STL) of an M4 Screw and nut? I have found",
"I can get a free 3D design (STEP or STL)",
"I have found only an M3 on Thingiverse: [M3 Bolt](http://www.thingiverse.com/thing:729842)",
"found only an M3 on Thingiverse: [M3 Bolt](http://www.thingiverse.com/thing:729842) by [Kaleta](http://www.thingiverse.com/Kaleta).",
"Does anyone know where I can get a free 3D",
"design (STEP or STL) of an M4 Screw and nut?",
"anyone know where I can get a free 3D design",
"nut? I have found only an M3 on Thingiverse: [M3",
"free 3D design (STEP or STL) of an M4 Screw",
"M4 Screw and nut? I have found only an M3",
"Screw and nut? I have found only an M3 on",
"where I can get a free 3D design (STEP or"
] |
[
"usable as a screw? What printer is capable of printing",
"printed a screw (M3 or M4). Is the printed output",
"successfully printed a screw (M3 or M4). Is the printed",
"has successfully printed a screw (M3 or M4). Is the",
"Can anyone share a picture of the best 3D printed",
"using an M3D printer - is there a configuration to",
"Is the printed output usable as a screw? What printer",
"a screw (M3 or M4). Is the printed output usable",
"is there a configuration to successfully print a screw that",
"a screw? What printer is capable of printing screws? I",
"screws? I am using an M3D printer - is there",
"am using an M3D printer - is there a configuration",
"that is usable? Can anyone share a picture of the",
"M3D printer - is there a configuration to successfully print",
"an M3D printer - is there a configuration to successfully",
"usable? Can anyone share a picture of the best 3D",
"printer is capable of printing screws? I am using an",
"to ask if anyone has successfully printed a screw (M3",
"successfully print a screw that is usable? Can anyone share",
"want to ask if anyone has successfully printed a screw",
"there a configuration to successfully print a screw that is",
"or M4). Is the printed output usable as a screw?",
"as a screw? What printer is capable of printing screws?",
"is usable? Can anyone share a picture of the best",
"M4). Is the printed output usable as a screw? What",
"the printed output usable as a screw? What printer is",
"(M3 or M4). Is the printed output usable as a",
"a configuration to successfully print a screw that is usable?",
"print a screw that is usable? Can anyone share a",
"printing screws? I am using an M3D printer - is",
"is capable of printing screws? I am using an M3D",
"What printer is capable of printing screws? I am using",
"- is there a configuration to successfully print a screw",
"configuration to successfully print a screw that is usable? Can",
"ask if anyone has successfully printed a screw (M3 or",
"screw (M3 or M4). Is the printed output usable as",
"of printing screws? I am using an M3D printer -",
"to successfully print a screw that is usable? Can anyone",
"a screw that is usable? Can anyone share a picture",
"screw that is usable? Can anyone share a picture of",
"capable of printing screws? I am using an M3D printer",
"printed output usable as a screw? What printer is capable",
"printer - is there a configuration to successfully print a",
"anyone share a picture of the best 3D printed screw?",
"anyone has successfully printed a screw (M3 or M4). Is",
"screw? What printer is capable of printing screws? I am",
"output usable as a screw? What printer is capable of",
"I just want to ask if anyone has successfully printed",
"just want to ask if anyone has successfully printed a",
"if anyone has successfully printed a screw (M3 or M4).",
"I am using an M3D printer - is there a"
] |
[
"the CNC needs to do for the keyboard project is",
"to drill 7\\*48 holes. So what I need to do",
"what I need to do now is layout those holes",
"is exactly 19.05 mm (which actually is what Cherry MX",
"actually is what Cherry MX says should be their spacing).",
"for the SVG? I want to space the center of",
"I am planning a mechanical 40% keyboard build and are",
"online pixel to mm converter suggested that 72 pixels is",
"is a number that will \"just work\". EDIT: For example,",
"I am curious as I am new on CNCs and",
"the keyboard project is to drill 7\\*48 holes. So what",
"mm converter suggested that 72 pixels is exactly 19.05 mm",
"work\". EDIT: For example, if I where to print the",
"only thing the CNC needs to do for the keyboard",
"need to do now is layout those holes in SVG.",
"19 mm apart. An online pixel to mm converter suggested",
"space the center of the keyboard switches 19 mm apart.",
"holes in SVG. Therein lies the question. What resolution should",
"a homemade CNC project. The only thing the CNC needs",
"MX says should be their spacing). Now, I do understand",
"that there is a number that will \"just work\". EDIT:",
"I am new on CNCs and was suspecting that there",
"what pixel to mm ratio should I use so that",
"For example, if I where to print the template (SVG)",
"ratio should I use so that it would come out",
"layout those holes in SVG. Therein lies the question. What",
"that this really doesn't matter, but I am curious as",
"really doesn't matter, but I am curious as I am",
"What resolution should I use for the SVG? I want",
"72 pixels is exactly 19.05 mm (which actually is what",
"are coincidentally on the home stretch of a homemade CNC",
"suggested that 72 pixels is exactly 19.05 mm (which actually",
"CNC project. The only thing the CNC needs to do",
"matter, but I am curious as I am new on",
"pixels is exactly 19.05 mm (which actually is what Cherry",
"CNCs and was suspecting that there is a number that",
"on the home stretch of a homemade CNC project. The",
"resolution should I use for the SVG? I want to",
"but I am curious as I am new on CNCs",
"template (SVG) on a regular printer, what pixel to mm",
"so that it would come out the size I want?",
"to do now is layout those holes in SVG. Therein",
"build and are coincidentally on the home stretch of a",
"there is a number that will \"just work\". EDIT: For",
"40% keyboard build and are coincidentally on the home stretch",
"center of the keyboard switches 19 mm apart. An online",
"example, if I where to print the template (SVG) on",
"So what I need to do now is layout those",
"and was suspecting that there is a number that will",
"keyboard build and are coincidentally on the home stretch of",
"to mm ratio should I use so that it would",
"number that will \"just work\". EDIT: For example, if I",
"converter suggested that 72 pixels is exactly 19.05 mm (which",
"the template (SVG) on a regular printer, what pixel to",
"the question. What resolution should I use for the SVG?",
"do now is layout those holes in SVG. Therein lies",
"and are coincidentally on the home stretch of a homemade",
"needs to do for the keyboard project is to drill",
"holes. So what I need to do now is layout",
"should be their spacing). Now, I do understand that this",
"Now, I do understand that this really doesn't matter, but",
"a regular printer, what pixel to mm ratio should I",
"coincidentally on the home stretch of a homemade CNC project.",
"was suspecting that there is a number that will \"just",
"Therein lies the question. What resolution should I use for",
"use so that it would come out the size I",
"the home stretch of a homemade CNC project. The only",
"in SVG. Therein lies the question. What resolution should I",
"mm (which actually is what Cherry MX says should be",
"that will \"just work\". EDIT: For example, if I where",
"use for the SVG? I want to space the center",
"understand that this really doesn't matter, but I am curious",
"keyboard switches 19 mm apart. An online pixel to mm",
"curious as I am new on CNCs and was suspecting",
"is what Cherry MX says should be their spacing). Now,",
"to print the template (SVG) on a regular printer, what",
"those holes in SVG. Therein lies the question. What resolution",
"exactly 19.05 mm (which actually is what Cherry MX says",
"print the template (SVG) on a regular printer, what pixel",
"project. The only thing the CNC needs to do for",
"drill 7\\*48 holes. So what I need to do now",
"lies the question. What resolution should I use for the",
"planning a mechanical 40% keyboard build and are coincidentally on",
"question. What resolution should I use for the SVG? I",
"I use so that it would come out the size",
"mechanical 40% keyboard build and are coincidentally on the home",
"the SVG? I want to space the center of the",
"CNC needs to do for the keyboard project is to",
"a mechanical 40% keyboard build and are coincidentally on the",
"Cherry MX says should be their spacing). Now, I do",
"do understand that this really doesn't matter, but I am",
"SVG? I want to space the center of the keyboard",
"mm ratio should I use so that it would come",
"regular printer, what pixel to mm ratio should I use",
"the center of the keyboard switches 19 mm apart. An",
"their spacing). Now, I do understand that this really doesn't",
"I want to space the center of the keyboard switches",
"pixel to mm ratio should I use so that it",
"this really doesn't matter, but I am curious as I",
"what Cherry MX says should be their spacing). Now, I",
"of the keyboard switches 19 mm apart. An online pixel",
"am new on CNCs and was suspecting that there is",
"keyboard project is to drill 7\\*48 holes. So what I",
"now is layout those holes in SVG. Therein lies the",
"to space the center of the keyboard switches 19 mm",
"I need to do now is layout those holes in",
"I where to print the template (SVG) on a regular",
"do for the keyboard project is to drill 7\\*48 holes.",
"switches 19 mm apart. An online pixel to mm converter",
"homemade CNC project. The only thing the CNC needs to",
"the keyboard switches 19 mm apart. An online pixel to",
"(which actually is what Cherry MX says should be their",
"where to print the template (SVG) on a regular printer,",
"am curious as I am new on CNCs and was",
"I use for the SVG? I want to space the",
"I do understand that this really doesn't matter, but I",
"on CNCs and was suspecting that there is a number",
"suspecting that there is a number that will \"just work\".",
"19.05 mm (which actually is what Cherry MX says should",
"7\\*48 holes. So what I need to do now is",
"\"just work\". EDIT: For example, if I where to print",
"An online pixel to mm converter suggested that 72 pixels",
"that 72 pixels is exactly 19.05 mm (which actually is",
"am planning a mechanical 40% keyboard build and are coincidentally",
"for the keyboard project is to drill 7\\*48 holes. So",
"should I use so that it would come out the",
"mm apart. An online pixel to mm converter suggested that",
"if I where to print the template (SVG) on a",
"EDIT: For example, if I where to print the template",
"spacing). Now, I do understand that this really doesn't matter,",
"want to space the center of the keyboard switches 19",
"thing the CNC needs to do for the keyboard project",
"home stretch of a homemade CNC project. The only thing",
"of a homemade CNC project. The only thing the CNC",
"doesn't matter, but I am curious as I am new",
"on a regular printer, what pixel to mm ratio should",
"says should be their spacing). Now, I do understand that",
"new on CNCs and was suspecting that there is a",
"The only thing the CNC needs to do for the",
"to mm converter suggested that 72 pixels is exactly 19.05",
"to do for the keyboard project is to drill 7\\*48",
"pixel to mm converter suggested that 72 pixels is exactly",
"a number that will \"just work\". EDIT: For example, if",
"(SVG) on a regular printer, what pixel to mm ratio",
"will \"just work\". EDIT: For example, if I where to",
"printer, what pixel to mm ratio should I use so",
"stretch of a homemade CNC project. The only thing the",
"is layout those holes in SVG. Therein lies the question.",
"SVG. Therein lies the question. What resolution should I use",
"project is to drill 7\\*48 holes. So what I need",
"be their spacing). Now, I do understand that this really",
"is to drill 7\\*48 holes. So what I need to",
"as I am new on CNCs and was suspecting that",
"should I use for the SVG? I want to space",
"apart. An online pixel to mm converter suggested that 72"
] |
[
"complete fail, the motors that i tried to change didn't",
"with the working E1 pins. How do I change this",
"pins in the micro-controller connected to the E0 motor -",
"connected to the E0 motor - the E0 motor is",
"motor with the working E1 pins. How do I change",
"the micro-controller connected to the E0 motor - the E0",
"E0 motor is not working anymore and I need to",
"working E1 pins. How do I change this in firmware?",
"I tried to change to the pins in `pins\\_RAMPS.h\" but",
"fail, the motors that i tried to change didn't move.",
"Ramps 1.3 in \"Extruder Fan Bed\" configuration, I use Repetier-Host",
"the pins in the micro-controller connected to the E0 motor",
"change to the pins in `pins\\_RAMPS.h\" but it was a",
"burnt the pins in the micro-controller connected to the E0",
"not working anymore and I need to print tomorrow! I",
"I need to control the extruder motor with the working",
"and I need to print tomorrow! I need to control",
"is not working anymore and I need to print tomorrow!",
"in firmware? I tried to change to the pins in",
"the motors that i tried to change didn't move. I",
"this in firmware? I tried to change to the pins",
"but it was a complete fail, the motors that i",
"Like many people, I have burnt the pins in the",
"have burnt the pins in the micro-controller connected to the",
"move. I have a Arduino Mega + Ramps 1.3 in",
"people, I have burnt the pins in the micro-controller connected",
"Fan Bed\" configuration, I use Repetier-Host as host and Marlin",
"do I change this in firmware? I tried to change",
"the pins in `pins\\_RAMPS.h\" but it was a complete fail,",
"Bed\" configuration, I use Repetier-Host as host and Marlin as",
"a complete fail, the motors that i tried to change",
"tried to change to the pins in `pins\\_RAMPS.h\" but it",
"anymore and I need to print tomorrow! I need to",
"I have burnt the pins in the micro-controller connected to",
"in `pins\\_RAMPS.h\" but it was a complete fail, the motors",
"the extruder motor with the working E1 pins. How do",
"need to control the extruder motor with the working E1",
"E1 pins. How do I change this in firmware? I",
"print tomorrow! I need to control the extruder motor with",
"I change this in firmware? I tried to change to",
"a Arduino Mega + Ramps 1.3 in \"Extruder Fan Bed\"",
"motors that i tried to change didn't move. I have",
"many people, I have burnt the pins in the micro-controller",
"micro-controller connected to the E0 motor - the E0 motor",
"E0 motor - the E0 motor is not working anymore",
"configuration, I use Repetier-Host as host and Marlin as firmware.",
"I need to print tomorrow! I need to control the",
"in \"Extruder Fan Bed\" configuration, I use Repetier-Host as host",
"didn't move. I have a Arduino Mega + Ramps 1.3",
"motor is not working anymore and I need to print",
"to change didn't move. I have a Arduino Mega +",
"`pins\\_RAMPS.h\" but it was a complete fail, the motors that",
"to print tomorrow! I need to control the extruder motor",
"firmware? I tried to change to the pins in `pins\\_RAMPS.h\"",
"+ Ramps 1.3 in \"Extruder Fan Bed\" configuration, I use",
"\"Extruder Fan Bed\" configuration, I use Repetier-Host as host and",
"pins. How do I change this in firmware? I tried",
"- the E0 motor is not working anymore and I",
"tried to change didn't move. I have a Arduino Mega",
"extruder motor with the working E1 pins. How do I",
"have a Arduino Mega + Ramps 1.3 in \"Extruder Fan",
"1.3 in \"Extruder Fan Bed\" configuration, I use Repetier-Host as",
"the E0 motor is not working anymore and I need",
"How do I change this in firmware? I tried to",
"to control the extruder motor with the working E1 pins.",
"i tried to change didn't move. I have a Arduino",
"in the micro-controller connected to the E0 motor - the",
"I have a Arduino Mega + Ramps 1.3 in \"Extruder",
"the E0 motor - the E0 motor is not working",
"need to print tomorrow! I need to control the extruder",
"control the extruder motor with the working E1 pins. How",
"tomorrow! I need to control the extruder motor with the",
"to the E0 motor - the E0 motor is not",
"it was a complete fail, the motors that i tried",
"to the pins in `pins\\_RAMPS.h\" but it was a complete",
"change this in firmware? I tried to change to the",
"Arduino Mega + Ramps 1.3 in \"Extruder Fan Bed\" configuration,",
"that i tried to change didn't move. I have a",
"to change to the pins in `pins\\_RAMPS.h\" but it was",
"pins in `pins\\_RAMPS.h\" but it was a complete fail, the",
"the working E1 pins. How do I change this in",
"motor - the E0 motor is not working anymore and",
"was a complete fail, the motors that i tried to",
"working anymore and I need to print tomorrow! I need",
"Mega + Ramps 1.3 in \"Extruder Fan Bed\" configuration, I",
"change didn't move. I have a Arduino Mega + Ramps"
] |
[
"have generated a few 3D prints in G-code using KISSlicer",
"see anything and print option is not working. I have",
"but I cannot see anything and print option is not",
"Ultimaker Cura I'm unable to get anything. The number of",
"and Slic3r, but when I load them into Ultimaker Cura",
"(hexagon) and I can print only using Ultimaker Cura. Please",
"Slic3r, but when I load them into Ultimaker Cura I'm",
"to get anything. The number of layers says one but",
"online and they are fine. I'm using a Lulzbot KITTAZ",
"one but I cannot see anything and print option is",
"are fine. I'm using a Lulzbot KITTAZ with v2 toolhead",
"fine. I'm using a Lulzbot KITTAZ with v2 toolhead (hexagon)",
"and print option is not working. I have viewed these",
"I'm unable to get anything. The number of layers says",
"v2 toolhead (hexagon) and I can print only using Ultimaker",
"can print only using Ultimaker Cura. Please tell me what",
"G-codes online and they are fine. I'm using a Lulzbot",
"when I load them into Ultimaker Cura I'm unable to",
"unable to get anything. The number of layers says one",
"these G-codes online and they are fine. I'm using a",
"print only using Ultimaker Cura. Please tell me what the",
"get anything. The number of layers says one but I",
"they are fine. I'm using a Lulzbot KITTAZ with v2",
"with v2 toolhead (hexagon) and I can print only using",
"but when I load them into Ultimaker Cura I'm unable",
"print option is not working. I have viewed these G-codes",
"KITTAZ with v2 toolhead (hexagon) and I can print only",
"option is not working. I have viewed these G-codes online",
"in G-code using KISSlicer and Slic3r, but when I load",
"Cura. Please tell me what the reason for this is.",
"KISSlicer and Slic3r, but when I load them into Ultimaker",
"using Ultimaker Cura. Please tell me what the reason for",
"not working. I have viewed these G-codes online and they",
"using KISSlicer and Slic3r, but when I load them into",
"and I can print only using Ultimaker Cura. Please tell",
"prints in G-code using KISSlicer and Slic3r, but when I",
"number of layers says one but I cannot see anything",
"G-code using KISSlicer and Slic3r, but when I load them",
"3D prints in G-code using KISSlicer and Slic3r, but when",
"I can print only using Ultimaker Cura. Please tell me",
"Cura I'm unable to get anything. The number of layers",
"few 3D prints in G-code using KISSlicer and Slic3r, but",
"them into Ultimaker Cura I'm unable to get anything. The",
"I have generated a few 3D prints in G-code using",
"a few 3D prints in G-code using KISSlicer and Slic3r,",
"anything. The number of layers says one but I cannot",
"Lulzbot KITTAZ with v2 toolhead (hexagon) and I can print",
"of layers says one but I cannot see anything and",
"layers says one but I cannot see anything and print",
"working. I have viewed these G-codes online and they are",
"anything and print option is not working. I have viewed",
"have viewed these G-codes online and they are fine. I'm",
"using a Lulzbot KITTAZ with v2 toolhead (hexagon) and I",
"viewed these G-codes online and they are fine. I'm using",
"cannot see anything and print option is not working. I",
"says one but I cannot see anything and print option",
"I have viewed these G-codes online and they are fine.",
"The number of layers says one but I cannot see",
"I cannot see anything and print option is not working.",
"I load them into Ultimaker Cura I'm unable to get",
"and they are fine. I'm using a Lulzbot KITTAZ with",
"toolhead (hexagon) and I can print only using Ultimaker Cura.",
"Ultimaker Cura. Please tell me what the reason for this",
"is not working. I have viewed these G-codes online and",
"I'm using a Lulzbot KITTAZ with v2 toolhead (hexagon) and",
"only using Ultimaker Cura. Please tell me what the reason",
"load them into Ultimaker Cura I'm unable to get anything.",
"into Ultimaker Cura I'm unable to get anything. The number",
"a Lulzbot KITTAZ with v2 toolhead (hexagon) and I can",
"generated a few 3D prints in G-code using KISSlicer and"
] |
[
"suggest to piece together disparate STL files? I'd like to",
"STL parts (head, torso, arms, legs) and make it a",
"generators available. This way, users can generate a custom model",
"resources or methods would OpenSCAD users suggest to piece together",
"I'd like to take an existing STL model-library of STL",
"legs) and make it a Thingiverse OpenSTL maker, similar to",
"generate a custom model using the designated parameters and download",
"existing STL model-library of STL parts (head, torso, arms, legs)",
"model-library of STL parts (head, torso, arms, legs) and make",
"OpenSCAD users suggest to piece together disparate STL files? I'd",
"to the castle generator and/or the puzzle generators available. This",
"similar to the castle generator and/or the puzzle generators available.",
"together disparate STL files? I'd like to take an existing",
"castle generator and/or the puzzle generators available. This way, users",
"using the designated parameters and download the model for printing.",
"an existing STL model-library of STL parts (head, torso, arms,",
"model using the designated parameters and download the model for",
"a Thingiverse OpenSTL maker, similar to the castle generator and/or",
"a custom model using the designated parameters and download the",
"piece together disparate STL files? I'd like to take an",
"STL model-library of STL parts (head, torso, arms, legs) and",
"like to take an existing STL model-library of STL parts",
"(head, torso, arms, legs) and make it a Thingiverse OpenSTL",
"torso, arms, legs) and make it a Thingiverse OpenSTL maker,",
"and/or the puzzle generators available. This way, users can generate",
"generator and/or the puzzle generators available. This way, users can",
"way, users can generate a custom model using the designated",
"files? I'd like to take an existing STL model-library of",
"arms, legs) and make it a Thingiverse OpenSTL maker, similar",
"maker, similar to the castle generator and/or the puzzle generators",
"Thingiverse OpenSTL maker, similar to the castle generator and/or the",
"and make it a Thingiverse OpenSTL maker, similar to the",
"make it a Thingiverse OpenSTL maker, similar to the castle",
"What resources or methods would OpenSCAD users suggest to piece",
"would OpenSCAD users suggest to piece together disparate STL files?",
"to piece together disparate STL files? I'd like to take",
"can generate a custom model using the designated parameters and",
"of STL parts (head, torso, arms, legs) and make it",
"puzzle generators available. This way, users can generate a custom",
"the puzzle generators available. This way, users can generate a",
"OpenSTL maker, similar to the castle generator and/or the puzzle",
"it a Thingiverse OpenSTL maker, similar to the castle generator",
"take an existing STL model-library of STL parts (head, torso,",
"methods would OpenSCAD users suggest to piece together disparate STL",
"or methods would OpenSCAD users suggest to piece together disparate",
"STL files? I'd like to take an existing STL model-library",
"available. This way, users can generate a custom model using",
"the castle generator and/or the puzzle generators available. This way,",
"users can generate a custom model using the designated parameters",
"to take an existing STL model-library of STL parts (head,",
"disparate STL files? I'd like to take an existing STL",
"This way, users can generate a custom model using the",
"custom model using the designated parameters and download the model",
"users suggest to piece together disparate STL files? I'd like",
"parts (head, torso, arms, legs) and make it a Thingiverse"
] |
[
"injection mold will be used limited number of items and",
"is custom and only has to be made in small",
"make injection molds of unimaginable complexity but which kind of",
"used limited number of items and then thrown away -",
"injection molds of unimaginable complexity but which kind of 3D",
"too soon? Also, suppose that the part to be made",
"then? Best in the sense of economic feasibility, lower cost,",
"be used limited number of items and then thrown away",
"process will be the best, such that the mold does",
"to say that the injection mold will be used limited",
"printing can be used to make injection molds of unimaginable",
"best, such that the mold does not give way too",
"process is suitable when? Suppose that a part is to",
"technique then? Best in the sense of economic feasibility, lower",
"when? Suppose that a part is to be made using",
"be the best, such that the mold does not give",
"the best AM technique then? Best in the sense of",
"give way too soon? Also, suppose that the part to",
"such that the mold does not give way too soon?",
"part is to be made using injection molding in large",
"be made using injection molding in large quantity for an",
"3D printing process is suitable when? Suppose that a part",
"does not give way too soon? Also, suppose that the",
"sense of economic feasibility, lower cost, lower capital investment etc.?",
"3D printing can be used to make injection molds of",
"large quantity for an extended period of time, what Additive",
"soon? Also, suppose that the part to be made is",
"made is custom and only has to be made in",
"say that the injection mold will be used limited number",
"to be made is custom and only has to be",
"that the injection mold will be used limited number of",
"which kind of 3D printing process is suitable when? Suppose",
"that is to say that the injection mold will be",
"suitable when? Suppose that a part is to be made",
"in large quantity for an extended period of time, what",
"- which is the best AM technique then? Best in",
"can be used to make injection molds of unimaginable complexity",
"to make injection molds of unimaginable complexity but which kind",
"used to make injection molds of unimaginable complexity but which",
"Also, suppose that the part to be made is custom",
"(AM) process will be the best, such that the mold",
"has to be made in small quantities - that is",
"then thrown away - which is the best AM technique",
"what Additive Manufacturing (AM) process will be the best, such",
"best AM technique then? Best in the sense of economic",
"is to say that the injection mold will be used",
"the sense of economic feasibility, lower cost, lower capital investment",
"mold will be used limited number of items and then",
"way too soon? Also, suppose that the part to be",
"will be the best, such that the mold does not",
"the part to be made is custom and only has",
"custom and only has to be made in small quantities",
"molds of unimaginable complexity but which kind of 3D printing",
"made in small quantities - that is to say that",
"an extended period of time, what Additive Manufacturing (AM) process",
"to be made using injection molding in large quantity for",
"limited number of items and then thrown away - which",
"Best in the sense of economic feasibility, lower cost, lower",
"that the mold does not give way too soon? Also,",
"the best, such that the mold does not give way",
"for an extended period of time, what Additive Manufacturing (AM)",
"quantity for an extended period of time, what Additive Manufacturing",
"small quantities - that is to say that the injection",
"that the part to be made is custom and only",
"is the best AM technique then? Best in the sense",
"unimaginable complexity but which kind of 3D printing process is",
"is suitable when? Suppose that a part is to be",
"of time, what Additive Manufacturing (AM) process will be the",
"will be used limited number of items and then thrown",
"and only has to be made in small quantities -",
"not give way too soon? Also, suppose that the part",
"period of time, what Additive Manufacturing (AM) process will be",
"in small quantities - that is to say that the",
"time, what Additive Manufacturing (AM) process will be the best,",
"and then thrown away - which is the best AM",
"of items and then thrown away - which is the",
"number of items and then thrown away - which is",
"Manufacturing (AM) process will be the best, such that the",
"to be made in small quantities - that is to",
"thrown away - which is the best AM technique then?",
"away - which is the best AM technique then? Best",
"which is the best AM technique then? Best in the",
"Additive Manufacturing (AM) process will be the best, such that",
"- that is to say that the injection mold will",
"of unimaginable complexity but which kind of 3D printing process",
"be made in small quantities - that is to say",
"only has to be made in small quantities - that",
"made using injection molding in large quantity for an extended",
"be used to make injection molds of unimaginable complexity but",
"that a part is to be made using injection molding",
"of 3D printing process is suitable when? Suppose that a",
"items and then thrown away - which is the best",
"is to be made using injection molding in large quantity",
"using injection molding in large quantity for an extended period",
"extended period of time, what Additive Manufacturing (AM) process will",
"part to be made is custom and only has to",
"molding in large quantity for an extended period of time,",
"the injection mold will be used limited number of items",
"mold does not give way too soon? Also, suppose that",
"a part is to be made using injection molding in",
"printing process is suitable when? Suppose that a part is",
"injection molding in large quantity for an extended period of",
"kind of 3D printing process is suitable when? Suppose that",
"quantities - that is to say that the injection mold",
"Suppose that a part is to be made using injection",
"in the sense of economic feasibility, lower cost, lower capital",
"complexity but which kind of 3D printing process is suitable",
"but which kind of 3D printing process is suitable when?",
"the mold does not give way too soon? Also, suppose",
"suppose that the part to be made is custom and",
"be made is custom and only has to be made",
"AM technique then? Best in the sense of economic feasibility,"
] |
[
"extra equipment on the printer to spped up this drying",
"can't be too low: if the bottom starts to dry",
"pushed out through the extruder's nozzle. I also assume the",
"to be pushed out through the extruder's nozzle. I also",
"same time, the print speed can't be too low: if",
"some solutions I've seen tend to result in rather low",
"to be fine grained and with enough water added to",
"the print speed would have to be arther low for",
"grained and with enough water added to be able to",
"printer to spped up this drying process? At the same",
"extruders and printers that do a good job with ceramic",
"able to be pushed out through the extruder's nozzle. I",
"starts to dry enough to start shrinking, the object will",
"to result in rather low resolution/thick layers, which is negative.",
"time, the print speed can't be too low: if the",
"on the printer to spped up this drying process? At",
"to spped up this drying process? At the same time,",
"layers to gain stability before printing the next layer. Perhaps",
"before printing the next layer. Perhaps some extra equipment on",
"print speed can't be too low: if the bottom starts",
"Perhaps some extra equipment on the printer to spped up",
"extruder's nozzle. I also assume the print speed would have",
"water added to be able to be pushed out through",
"I assume the clay has to be fine grained and",
"assume the clay has to be fine grained and with",
"be fine grained and with enough water added to be",
"out through the extruder's nozzle. I also assume the print",
"rather low resolution/thick layers, which is negative. So, what equipment",
"the object will crack. Also, some solutions I've seen tend",
"stability before printing the next layer. Perhaps some extra equipment",
"be too low: if the bottom starts to dry enough",
"layer. Perhaps some extra equipment on the printer to spped",
"already printed layers to gain stability before printing the next",
"good job with ceramic clay? I assume the clay has",
"solutions I've seen tend to result in rather low resolution/thick",
"resolution/thick layers, which is negative. So, what equipment is \"out",
"up this drying process? At the same time, the print",
"to start shrinking, the object will crack. Also, some solutions",
"Also, some solutions I've seen tend to result in rather",
"job with ceramic clay? I assume the clay has to",
"has to be fine grained and with enough water added",
"some extra equipment on the printer to spped up this",
"to be arther low for the already printed layers to",
"ceramic clay? I assume the clay has to be fine",
"enough water added to be able to be pushed out",
"a good job with ceramic clay? I assume the clay",
"result in rather low resolution/thick layers, which is negative. So,",
"the next layer. Perhaps some extra equipment on the printer",
"fine grained and with enough water added to be able",
"tend to result in rather low resolution/thick layers, which is",
"equipment on the printer to spped up this drying process?",
"for the already printed layers to gain stability before printing",
"to gain stability before printing the next layer. Perhaps some",
"Are there any extruders and printers that do a good",
"I also assume the print speed would have to be",
"that do a good job with ceramic clay? I assume",
"if the bottom starts to dry enough to start shrinking,",
"dry enough to start shrinking, the object will crack. Also,",
"and with enough water added to be able to be",
"the same time, the print speed can't be too low:",
"shrinking, the object will crack. Also, some solutions I've seen",
"I've seen tend to result in rather low resolution/thick layers,",
"next layer. Perhaps some extra equipment on the printer to",
"seen tend to result in rather low resolution/thick layers, which",
"be pushed out through the extruder's nozzle. I also assume",
"drying process? At the same time, the print speed can't",
"At the same time, the print speed can't be too",
"printers that do a good job with ceramic clay? I",
"the already printed layers to gain stability before printing the",
"layers, which is negative. So, what equipment is \"out there\"?",
"will crack. Also, some solutions I've seen tend to result",
"enough to start shrinking, the object will crack. Also, some",
"print speed would have to be arther low for the",
"clay? I assume the clay has to be fine grained",
"low resolution/thick layers, which is negative. So, what equipment is",
"process? At the same time, the print speed can't be",
"in rather low resolution/thick layers, which is negative. So, what",
"through the extruder's nozzle. I also assume the print speed",
"have to be arther low for the already printed layers",
"the print speed can't be too low: if the bottom",
"clay has to be fine grained and with enough water",
"do a good job with ceramic clay? I assume the",
"be arther low for the already printed layers to gain",
"low for the already printed layers to gain stability before",
"object will crack. Also, some solutions I've seen tend to",
"would have to be arther low for the already printed",
"to dry enough to start shrinking, the object will crack.",
"gain stability before printing the next layer. Perhaps some extra",
"with ceramic clay? I assume the clay has to be",
"bottom starts to dry enough to start shrinking, the object",
"spped up this drying process? At the same time, the",
"and printers that do a good job with ceramic clay?",
"the bottom starts to dry enough to start shrinking, the",
"be able to be pushed out through the extruder's nozzle.",
"too low: if the bottom starts to dry enough to",
"added to be able to be pushed out through the",
"to be able to be pushed out through the extruder's",
"nozzle. I also assume the print speed would have to",
"start shrinking, the object will crack. Also, some solutions I've",
"printing the next layer. Perhaps some extra equipment on the",
"this drying process? At the same time, the print speed",
"low: if the bottom starts to dry enough to start",
"the extruder's nozzle. I also assume the print speed would",
"the clay has to be fine grained and with enough",
"also assume the print speed would have to be arther",
"crack. Also, some solutions I've seen tend to result in",
"speed would have to be arther low for the already",
"with enough water added to be able to be pushed",
"the printer to spped up this drying process? At the",
"arther low for the already printed layers to gain stability",
"assume the print speed would have to be arther low",
"speed can't be too low: if the bottom starts to",
"any extruders and printers that do a good job with",
"there any extruders and printers that do a good job",
"printed layers to gain stability before printing the next layer."
] |
[
"areas, my extruder clicks. The below screenshot of Slic3rs Layers",
"firmware. I already reduced the default speeds as well as",
"Slic3rs Layers view shows the clicking \"lines\". [](https://i.stack.imgur.com/Rzmxn.png) What settings I need to change",
"image description here](https://i.stack.imgur.com/Rzmxn.png)](https://i.stack.imgur.com/Rzmxn.png) What settings I need to change to",
"description here](https://i.stack.imgur.com/Rzmxn.png)](https://i.stack.imgur.com/Rzmxn.png) What settings I need to change to avoid",
"default speeds as well as the accelerations. But sometimes when",
"(220°C), mostly during filling areas, my extruder clicks. The below",
"shows the clicking \"lines\". [](https://i.stack.imgur.com/Rzmxn.png) What settings",
"i3 derivative with MK8 extruder and Marlin 1.1RC8 as firmware.",
"BQ PLA filament (220°C), mostly during filling areas, my extruder",
"the accelerations. But sometimes when trying to print with BQ",
"with BQ PLA filament (220°C), mostly during filling areas, my",
"clicks. The below screenshot of Slic3rs Layers view shows the",
"already reduced the default speeds as well as the accelerations.",
"the default speeds as well as the accelerations. But sometimes",
"What settings I need to change to avoid the overextrusion",
"I need to change to avoid the overextrusion in this",
"filament (220°C), mostly during filling areas, my extruder clicks. The",
"reduced the default speeds as well as the accelerations. But",
"extruder and Marlin 1.1RC8 as firmware. I already reduced the",
"and Marlin 1.1RC8 as firmware. I already reduced the default",
"\"lines\". [](https://i.stack.imgur.com/Rzmxn.png) What settings I need to",
"sometimes when trying to print with BQ PLA filament (220°C),",
"the clicking \"lines\". [](https://i.stack.imgur.com/Rzmxn.png) What settings I",
"when trying to print with BQ PLA filament (220°C), mostly",
"accelerations. But sometimes when trying to print with BQ PLA",
"Prosi i3 derivative with MK8 extruder and Marlin 1.1RC8 as",
"as firmware. I already reduced the default speeds as well",
"here](https://i.stack.imgur.com/Rzmxn.png)](https://i.stack.imgur.com/Rzmxn.png) What settings I need to change to avoid the",
"PLA filament (220°C), mostly during filling areas, my extruder clicks.",
"1.1RC8 as firmware. I already reduced the default speeds as",
"filling areas, my extruder clicks. The below screenshot of Slic3rs",
"screenshot of Slic3rs Layers view shows the clicking \"lines\". [](https://i.stack.imgur.com/Rzmxn.png) What",
"clicking \"lines\". [](https://i.stack.imgur.com/Rzmxn.png) What settings I need",
"Layers view shows the clicking \"lines\". [](https://i.stack.imgur.com/Rzmxn.png)",
"need to change to avoid the overextrusion in this case?",
"I have Prosi i3 derivative with MK8 extruder and Marlin",
"as the accelerations. But sometimes when trying to print with",
"to print with BQ PLA filament (220°C), mostly during filling",
"as well as the accelerations. But sometimes when trying to",
"settings I need to change to avoid the overextrusion in",
"Marlin 1.1RC8 as firmware. I already reduced the default speeds",
"MK8 extruder and Marlin 1.1RC8 as firmware. I already reduced",
"of Slic3rs Layers view shows the clicking \"lines\". [![enter image",
"below screenshot of Slic3rs Layers view shows the clicking \"lines\".",
"speeds as well as the accelerations. But sometimes when trying",
"extruder clicks. The below screenshot of Slic3rs Layers view shows",
"But sometimes when trying to print with BQ PLA filament",
"I already reduced the default speeds as well as the",
"during filling areas, my extruder clicks. The below screenshot of",
"print with BQ PLA filament (220°C), mostly during filling areas,",
"derivative with MK8 extruder and Marlin 1.1RC8 as firmware. I",
"trying to print with BQ PLA filament (220°C), mostly during",
"with MK8 extruder and Marlin 1.1RC8 as firmware. I already"
] |
[
"and that it results in Printer \"fails\". I'm actually a",
"first 3D Printer, on a tight budget of $250. Unfortunately,",
"on a printer that produces 90% print fails. An example",
"$250. Unfortunately, this printer that I found on Amazon comes",
"with this buy, as I don't want to spend $250",
"read that the plastic/ filament cools down rather quickly, and",
"this printer that I found on Amazon comes with all",
"want to know if this would affect printing severely, as",
"my first 3D Printer, on a tight budget of $250.",
"buy my first 3D Printer, on a tight budget of",
"as I have read that the plastic/ filament cools down",
"found on Amazon comes with all the bells and whistles,",
"fails. An example of the printer I'm referring to is",
"filament cools down rather quickly, and that it results in",
"of $250. Unfortunately, this printer that I found on Amazon",
"whistles, *except* for a heated bed. I want to know",
"referring to is the [Cube 3 Printer, Gquy by 3D",
"have read that the plastic/ filament cools down rather quickly,",
"to is the [Cube 3 Printer, Gquy by 3D Systems](http://rads.stackoverflow.com/amzn/click/B015FXQZ6O).",
"affect printing severely, as I have read that the plastic/",
"it results in Printer \"fails\". I'm actually a bit nervous",
"3D Printer, on a tight budget of $250. Unfortunately, this",
"all the bells and whistles, *except* for a heated bed.",
"Printer \"fails\". I'm actually a bit nervous with this buy,",
"*except* for a heated bed. I want to know if",
"example of the printer I'm referring to is the [Cube",
"down rather quickly, and that it results in Printer \"fails\".",
"\"fails\". I'm actually a bit nervous with this buy, as",
"the printer I'm referring to is the [Cube 3 Printer,",
"on Amazon comes with all the bells and whistles, *except*",
"Printer, on a tight budget of $250. Unfortunately, this printer",
"the bells and whistles, *except* for a heated bed. I",
"for a heated bed. I want to know if this",
"that I found on Amazon comes with all the bells",
"a tight budget of $250. Unfortunately, this printer that I",
"in Printer \"fails\". I'm actually a bit nervous with this",
"plastic/ filament cools down rather quickly, and that it results",
"as I don't want to spend $250 on a printer",
"the plastic/ filament cools down rather quickly, and that it",
"and whistles, *except* for a heated bed. I want to",
"know if this would affect printing severely, as I have",
"actually a bit nervous with this buy, as I don't",
"I'm looking to buy my first 3D Printer, on a",
"tight budget of $250. Unfortunately, this printer that I found",
"comes with all the bells and whistles, *except* for a",
"$250 on a printer that produces 90% print fails. An",
"quickly, and that it results in Printer \"fails\". I'm actually",
"printer that I found on Amazon comes with all the",
"this buy, as I don't want to spend $250 on",
"cools down rather quickly, and that it results in Printer",
"want to spend $250 on a printer that produces 90%",
"printer that produces 90% print fails. An example of the",
"with all the bells and whistles, *except* for a heated",
"bells and whistles, *except* for a heated bed. I want",
"Unfortunately, this printer that I found on Amazon comes with",
"to spend $250 on a printer that produces 90% print",
"Amazon comes with all the bells and whistles, *except* for",
"I don't want to spend $250 on a printer that",
"produces 90% print fails. An example of the printer I'm",
"results in Printer \"fails\". I'm actually a bit nervous with",
"that produces 90% print fails. An example of the printer",
"I'm actually a bit nervous with this buy, as I",
"if this would affect printing severely, as I have read",
"buy, as I don't want to spend $250 on a",
"An example of the printer I'm referring to is the",
"heated bed. I want to know if this would affect",
"rather quickly, and that it results in Printer \"fails\". I'm",
"this would affect printing severely, as I have read that",
"a heated bed. I want to know if this would",
"printer I'm referring to is the [Cube 3 Printer, Gquy",
"on a tight budget of $250. Unfortunately, this printer that",
"a bit nervous with this buy, as I don't want",
"I'm referring to is the [Cube 3 Printer, Gquy by",
"looking to buy my first 3D Printer, on a tight",
"to buy my first 3D Printer, on a tight budget",
"to know if this would affect printing severely, as I",
"spend $250 on a printer that produces 90% print fails.",
"I have read that the plastic/ filament cools down rather",
"print fails. An example of the printer I'm referring to",
"don't want to spend $250 on a printer that produces",
"severely, as I have read that the plastic/ filament cools",
"bit nervous with this buy, as I don't want to",
"that the plastic/ filament cools down rather quickly, and that",
"of the printer I'm referring to is the [Cube 3",
"90% print fails. An example of the printer I'm referring",
"nervous with this buy, as I don't want to spend",
"that it results in Printer \"fails\". I'm actually a bit",
"I want to know if this would affect printing severely,",
"would affect printing severely, as I have read that the",
"I found on Amazon comes with all the bells and",
"printing severely, as I have read that the plastic/ filament",
"budget of $250. Unfortunately, this printer that I found on",
"bed. I want to know if this would affect printing",
"a printer that produces 90% print fails. An example of"
] |
[
"could sit here and punch holes through the handle with",
"like in the movies where the spies look at a",
"punch holes through the handle with a smaller cylinder, or",
"easier way to do this? It must be a pretty",
"to do this? It must be a pretty common requirement,",
"design. First project was a replacement handle for my angle",
"of material used in the print. I could sit here",
"started doing some design. First project was a replacement handle",
"in the print. I could sit here and punch holes",
"surface and overlay some sort of pattern to remove material.",
"spies look at a photo and tell the tech to",
"sit here and punch holes through the handle with a",
"handle for my angle grinder, so basically a hollow cylinder.",
"a surface and overlay some sort of pattern to remove",
"pretty common requirement, just like in the movies where the",
"holes through the handle with a smaller cylinder, or some",
"to 'enhance ... enhance'. Ideally you could select a surface",
"some other shape etc., but is there an easier way",
"a photo and tell the tech to 'enhance ... enhance'.",
"the spies look at a photo and tell the tech",
"where the spies look at a photo and tell the",
"the print. I could sit here and punch holes through",
"want to reduce the amount of material used in the",
"the amount of material used in the print. I could",
"to reduce the amount of material used in the print.",
"print. I could sit here and punch holes through the",
"shape etc., but is there an easier way to do",
"for my angle grinder, so basically a hollow cylinder. I",
"through the handle with a smaller cylinder, or some other",
"Ideally you could select a surface and overlay some sort",
"hollow cylinder. I want to reduce the amount of material",
"reduce the amount of material used in the print. I",
"but is there an easier way to do this? It",
"common requirement, just like in the movies where the spies",
"tell the tech to 'enhance ... enhance'. Ideally you could",
"here and punch holes through the handle with a smaller",
"there an easier way to do this? It must be",
"etc., but is there an easier way to do this?",
"a smaller cylinder, or some other shape etc., but is",
"so basically a hollow cylinder. I want to reduce the",
"It must be a pretty common requirement, just like in",
"basically a hollow cylinder. I want to reduce the amount",
"a replacement handle for my angle grinder, so basically a",
"cylinder. I want to reduce the amount of material used",
"... enhance'. Ideally you could select a surface and overlay",
"used in the print. I could sit here and punch",
"this? It must be a pretty common requirement, just like",
"an easier way to do this? It must be a",
"the movies where the spies look at a photo and",
"requirement, just like in the movies where the spies look",
"and tell the tech to 'enhance ... enhance'. Ideally you",
"replacement handle for my angle grinder, so basically a hollow",
"cylinder, or some other shape etc., but is there an",
"my angle grinder, so basically a hollow cylinder. I want",
"the handle with a smaller cylinder, or some other shape",
"a pretty common requirement, just like in the movies where",
"and punch holes through the handle with a smaller cylinder,",
"amount of material used in the print. I could sit",
"'enhance ... enhance'. Ideally you could select a surface and",
"the tech to 'enhance ... enhance'. Ideally you could select",
"at a photo and tell the tech to 'enhance ...",
"in the movies where the spies look at a photo",
"was a replacement handle for my angle grinder, so basically",
"or some other shape etc., but is there an easier",
"enhance'. Ideally you could select a surface and overlay some",
"I want to reduce the amount of material used in",
"angle grinder, so basically a hollow cylinder. I want to",
"tech to 'enhance ... enhance'. Ideally you could select a",
"other shape etc., but is there an easier way to",
"look at a photo and tell the tech to 'enhance",
"First project was a replacement handle for my angle grinder,",
"a hollow cylinder. I want to reduce the amount of",
"movies where the spies look at a photo and tell",
"project was a replacement handle for my angle grinder, so",
"select a surface and overlay some sort of pattern to",
"must be a pretty common requirement, just like in the",
"Just started doing some design. First project was a replacement",
"material used in the print. I could sit here and",
"with a smaller cylinder, or some other shape etc., but",
"way to do this? It must be a pretty common",
"is there an easier way to do this? It must",
"do this? It must be a pretty common requirement, just",
"photo and tell the tech to 'enhance ... enhance'. Ideally",
"you could select a surface and overlay some sort of",
"could select a surface and overlay some sort of pattern",
"just like in the movies where the spies look at",
"some design. First project was a replacement handle for my",
"smaller cylinder, or some other shape etc., but is there",
"grinder, so basically a hollow cylinder. I want to reduce",
"I could sit here and punch holes through the handle",
"handle with a smaller cylinder, or some other shape etc.,",
"be a pretty common requirement, just like in the movies",
"doing some design. First project was a replacement handle for"
] |
[
"plate. Instead the print \"curls\" up on one or more",
"corners. To reduce this effect, I'm using a brim between",
"on the size of the object the brim works quite",
"first layers. For larger objects I often have the problem",
"to the blue-painters-tape-covered aluminium print plate. Instead the print \"curls\"",
"is not needed, others recommend 60-70°C, but not for the",
"using a brim between 5 and 10mm. Depending on the",
"bed also improve the print quality by reducing the amount",
"the brim works quite well. Will heating the bed also",
"more corners. To reduce this effect, I'm using a brim",
"recommend 60-70°C, but not for the first layers. For larger",
"on one or more corners. To reduce this effect, I'm",
"up on one or more corners. To reduce this effect,",
"one or more corners. To reduce this effect, I'm using",
"others recommend 60-70°C, but not for the first layers. For",
"the print quality by reducing the amount of heat warping",
"about PLA and heat-bed. Some say it is not needed,",
"improve the print quality by reducing the amount of heat",
"for the first layers. For larger objects I often have",
"I often have the problem that the object does not",
"well. Will heating the bed also improve the print quality",
"the bed also improve the print quality by reducing the",
"Instead the print \"curls\" up on one or more corners.",
"the object does not stick to the blue-painters-tape-covered aluminium print",
"I've read different things about PLA and heat-bed. Some say",
"that the object does not stick to the blue-painters-tape-covered aluminium",
"not for the first layers. For larger objects I often",
"problem that the object does not stick to the blue-painters-tape-covered",
"not needed, others recommend 60-70°C, but not for the first",
"often have the problem that the object does not stick",
"read different things about PLA and heat-bed. Some say it",
"a brim between 5 and 10mm. Depending on the size",
"10mm. Depending on the size of the object the brim",
"and heat-bed. Some say it is not needed, others recommend",
"size of the object the brim works quite well. Will",
"effect, I'm using a brim between 5 and 10mm. Depending",
"blue-painters-tape-covered aluminium print plate. Instead the print \"curls\" up on",
"object the brim works quite well. Will heating the bed",
"but not for the first layers. For larger objects I",
"reduce this effect, I'm using a brim between 5 and",
"layers. For larger objects I often have the problem that",
"have the problem that the object does not stick to",
"brim works quite well. Will heating the bed also improve",
"between 5 and 10mm. Depending on the size of the",
"heating the bed also improve the print quality by reducing",
"say it is not needed, others recommend 60-70°C, but not",
"the print \"curls\" up on one or more corners. To",
"the object the brim works quite well. Will heating the",
"not stick to the blue-painters-tape-covered aluminium print plate. Instead the",
"\"curls\" up on one or more corners. To reduce this",
"also improve the print quality by reducing the amount of",
"print \"curls\" up on one or more corners. To reduce",
"and 10mm. Depending on the size of the object the",
"Some say it is not needed, others recommend 60-70°C, but",
"Will heating the bed also improve the print quality by",
"For larger objects I often have the problem that the",
"larger objects I often have the problem that the object",
"the problem that the object does not stick to the",
"To reduce this effect, I'm using a brim between 5",
"heat-bed. Some say it is not needed, others recommend 60-70°C,",
"brim between 5 and 10mm. Depending on the size of",
"the first layers. For larger objects I often have the",
"print quality by reducing the amount of heat warping /",
"objects I often have the problem that the object does",
"stick to the blue-painters-tape-covered aluminium print plate. Instead the print",
"I'm using a brim between 5 and 10mm. Depending on",
"PLA and heat-bed. Some say it is not needed, others",
"the size of the object the brim works quite well.",
"of the object the brim works quite well. Will heating",
"Depending on the size of the object the brim works",
"works quite well. Will heating the bed also improve the",
"or more corners. To reduce this effect, I'm using a",
"does not stick to the blue-painters-tape-covered aluminium print plate. Instead",
"it is not needed, others recommend 60-70°C, but not for",
"needed, others recommend 60-70°C, but not for the first layers.",
"this effect, I'm using a brim between 5 and 10mm.",
"60-70°C, but not for the first layers. For larger objects",
"object does not stick to the blue-painters-tape-covered aluminium print plate.",
"different things about PLA and heat-bed. Some say it is",
"5 and 10mm. Depending on the size of the object",
"things about PLA and heat-bed. Some say it is not",
"quite well. Will heating the bed also improve the print",
"the blue-painters-tape-covered aluminium print plate. Instead the print \"curls\" up",
"aluminium print plate. Instead the print \"curls\" up on one",
"print plate. Instead the print \"curls\" up on one or",
"quality by reducing the amount of heat warping / curling?"
] |
[
"near the hot end or near the bottom of the",
"In this printer the Z-platform moves up and down and",
"of building the [D-Bot core XY](http://www.thingiverse.com/thing:1001065) printer, and I was",
"near the bottom of the printer furthest away from the",
"of the printer furthest away from the hotend? In this",
"from the hotend? In this printer the Z-platform moves up",
"and down and the nozzle stays at the same height.",
"printer furthest away from the hotend? In this printer the",
"away from the hotend? In this printer the Z-platform moves",
"hotend? In this printer the Z-platform moves up and down",
"the bottom of the printer furthest away from the hotend?",
"core XY](http://www.thingiverse.com/thing:1001065) printer, and I was hoping to know if",
"[D-Bot core XY](http://www.thingiverse.com/thing:1001065) printer, and I was hoping to know",
"if the Z-axis 'zero' is near the hot end or",
"XY](http://www.thingiverse.com/thing:1001065) printer, and I was hoping to know if the",
"I'm in the process of building the [D-Bot core XY](http://www.thingiverse.com/thing:1001065)",
"printer, and I was hoping to know if the Z-axis",
"the Z-platform moves up and down and the nozzle stays",
"in the process of building the [D-Bot core XY](http://www.thingiverse.com/thing:1001065) printer,",
"and I was hoping to know if the Z-axis 'zero'",
"to know if the Z-axis 'zero' is near the hot",
"this printer the Z-platform moves up and down and the",
"the process of building the [D-Bot core XY](http://www.thingiverse.com/thing:1001065) printer, and",
"know if the Z-axis 'zero' is near the hot end",
"Z-platform moves up and down and the nozzle stays at",
"process of building the [D-Bot core XY](http://www.thingiverse.com/thing:1001065) printer, and I",
"was hoping to know if the Z-axis 'zero' is near",
"is near the hot end or near the bottom of",
"up and down and the nozzle stays at the same",
"the printer furthest away from the hotend? In this printer",
"furthest away from the hotend? In this printer the Z-platform",
"I was hoping to know if the Z-axis 'zero' is",
"bottom of the printer furthest away from the hotend? In",
"the Z-axis 'zero' is near the hot end or near",
"moves up and down and the nozzle stays at the",
"Z-axis 'zero' is near the hot end or near the",
"'zero' is near the hot end or near the bottom",
"the [D-Bot core XY](http://www.thingiverse.com/thing:1001065) printer, and I was hoping to",
"printer the Z-platform moves up and down and the nozzle",
"the hot end or near the bottom of the printer",
"hot end or near the bottom of the printer furthest",
"building the [D-Bot core XY](http://www.thingiverse.com/thing:1001065) printer, and I was hoping",
"end or near the bottom of the printer furthest away",
"or near the bottom of the printer furthest away from",
"hoping to know if the Z-axis 'zero' is near the",
"the hotend? In this printer the Z-platform moves up and"
] |
[
"Arduino Materia 101 * Filament: Rec Pla * Temp: 210",
"* Filament: Rec Pla * Temp: 210 degrees I have",
"I just found information about a problem when the infill",
"Filament: Rec Pla * Temp: 210 degrees I have tried",
"Pla * Temp: 210 degrees I have tried to troubleshoot",
"to the wall everywhere. However, for me, the problem is",
"rough, and a lot higher, surface on the first few",
"isn't close enough to the wall everywhere. However, for me,",
"enough to the wall everywhere. However, for me, the problem",
"a rough, and a lot higher, surface on the first",
"there's a rough, and a lot higher, surface on the",
"and a lot higher, surface on the first few millimeters",
"one side of my print. Thereupon there's a rough, and",
"millimeters after the wall. * Printer: Arduino Materia 101 *",
"about a problem when the infill isn't close enough to",
"troubleshoot it, but I just found information about a problem",
"it, but I just found information about a problem when",
"my print. Thereupon there's a rough, and a lot higher,",
"a problem when the infill isn't close enough to the",
"when the infill isn't close enough to the wall everywhere.",
"the wall. * Printer: Arduino Materia 101 * Filament: Rec",
"Rec Pla * Temp: 210 degrees I have tried to",
"for me, the problem is the contrary and just on",
"When printing the first layer, the infill overlaps on just",
"wall everywhere. However, for me, the problem is the contrary",
"the first layer, the infill overlaps on just one side",
"210 degrees I have tried to troubleshoot it, but I",
"* Printer: Arduino Materia 101 * Filament: Rec Pla *",
"tried to troubleshoot it, but I just found information about",
"close enough to the wall everywhere. However, for me, the",
"the wall everywhere. However, for me, the problem is the",
"on the first few millimeters after the wall. * Printer:",
"Materia 101 * Filament: Rec Pla * Temp: 210 degrees",
"after the wall. * Printer: Arduino Materia 101 * Filament:",
"surface on the first few millimeters after the wall. *",
"the first few millimeters after the wall. * Printer: Arduino",
"higher, surface on the first few millimeters after the wall.",
"but I just found information about a problem when the",
"found information about a problem when the infill isn't close",
"me, the problem is the contrary and just on one",
"I have tried to troubleshoot it, but I just found",
"of my print. Thereupon there's a rough, and a lot",
"have tried to troubleshoot it, but I just found information",
"everywhere. However, for me, the problem is the contrary and",
"overlaps on just one side of my print. Thereupon there's",
"Temp: 210 degrees I have tried to troubleshoot it, but",
"few millimeters after the wall. * Printer: Arduino Materia 101",
"problem is the contrary and just on one side. [](https://i.stack.imgur.com/SFYAqm.jpg)",
"lot higher, surface on the first few millimeters after the",
"just one side of my print. Thereupon there's a rough,",
"the infill overlaps on just one side of my print."
] |
[
"prototypes and increase the sizes according to the real prints?",
"it prints holes correctly sizes in all common sizes (e.g.",
"contain certain sized holes, e.g. for screws, how to achieve",
"to print parts that should contain certain sized holes, e.g.",
"parts that should contain certain sized holes, e.g. for screws,",
"holes, e.g. for screws, how to achieve that they are",
"printer perfectly, so it prints holes correctly sizes in all",
"it better to design the holes larger or print prototypes",
"larger or print prototypes and increase the sizes according to",
"print parts that should contain certain sized holes, e.g. for",
"possible to calibrate the printer perfectly, so it prints holes",
"better to design the holes larger or print prototypes and",
"starting at 2mm diameter)? Or is it better to design",
"achieve that they are sized correctly? Is it possible to",
"design the holes larger or print prototypes and increase the",
"holes larger or print prototypes and increase the sizes according",
"2mm diameter)? Or is it better to design the holes",
"for screws, how to achieve that they are sized correctly?",
"certain sized holes, e.g. for screws, how to achieve that",
"to calibrate the printer perfectly, so it prints holes correctly",
"sized correctly? Is it possible to calibrate the printer perfectly,",
"holes correctly sizes in all common sizes (e.g. starting at",
"or print prototypes and increase the sizes according to the",
"(e.g. starting at 2mm diameter)? Or is it better to",
"e.g. for screws, how to achieve that they are sized",
"so it prints holes correctly sizes in all common sizes",
"When trying to print parts that should contain certain sized",
"correctly? Is it possible to calibrate the printer perfectly, so",
"Is it possible to calibrate the printer perfectly, so it",
"correctly sizes in all common sizes (e.g. starting at 2mm",
"that should contain certain sized holes, e.g. for screws, how",
"that they are sized correctly? Is it possible to calibrate",
"sized holes, e.g. for screws, how to achieve that they",
"all common sizes (e.g. starting at 2mm diameter)? Or is",
"diameter)? Or is it better to design the holes larger",
"they are sized correctly? Is it possible to calibrate the",
"sizes (e.g. starting at 2mm diameter)? Or is it better",
"the holes larger or print prototypes and increase the sizes",
"perfectly, so it prints holes correctly sizes in all common",
"how to achieve that they are sized correctly? Is it",
"should contain certain sized holes, e.g. for screws, how to",
"the printer perfectly, so it prints holes correctly sizes in",
"at 2mm diameter)? Or is it better to design the",
"sizes in all common sizes (e.g. starting at 2mm diameter)?",
"trying to print parts that should contain certain sized holes,",
"it possible to calibrate the printer perfectly, so it prints",
"to design the holes larger or print prototypes and increase",
"common sizes (e.g. starting at 2mm diameter)? Or is it",
"are sized correctly? Is it possible to calibrate the printer",
"prints holes correctly sizes in all common sizes (e.g. starting",
"is it better to design the holes larger or print",
"in all common sizes (e.g. starting at 2mm diameter)? Or",
"print prototypes and increase the sizes according to the real",
"to achieve that they are sized correctly? Is it possible",
"Or is it better to design the holes larger or",
"calibrate the printer perfectly, so it prints holes correctly sizes",
"screws, how to achieve that they are sized correctly? Is"
] |
[
"E6.65594 F900.000 newX = 158.878 mm newY = 27.769 mm",
"Acceleration X, Acceleration Y, Acceleration Z, Jerk, and Z-Jerk. I'd",
"mm currentY = 0 mm currentZ = 0 mm #",
"= 0.2 / 90 = 0.002 s totalTime = totalTime",
"I started to write an application that calculates the estimated",
"s ``` In this example, the print will take approximately",
"15 = 10.755 s totalTime = totalTime + moveTime =",
"and, how do they speed up or slow down the",
"mm/s deltaZ = newZ - currentZ = 0.2 - 0",
"mmPerSecond = 900 / 60 = 15 mm/s deltaX =",
"works and it's pretty accurate. It works as follows: 1.",
"is the calculation it does: ``` totalTime = 0 #",
"1. How should Acceleration and Jerk be considered; and, how",
"; home all axes G1 Z0.200 F5400.000 G1 X158.878 Y27.769",
"and Z-Jerk. I'd like to make it possible to use",
"0 mm currentY = 0 mm currentZ = 0 mm",
"an already sliced model. The program works and it's pretty",
"write an application that calculates the estimated total print time",
"to identify all of the movements 2. It calculates the",
"file for an already sliced model. The program works and",
"F5400.000 newZ = 0.2 mm mmPerSecond = 5400 / 60",
"edit my formula in order to include Acceleration and Jerk",
"the entire G-code file to identify all of the movements",
"the movements 2. It calculates the time for each move",
"It scans the entire G-code file to identify all of",
"= newY - currentY = 27.769 - 0 = 27.769",
"square_root(deltaX² + deltaY²) = 161.287 mm moveTime = deltaZ /",
"axes currentX = 0 mm currentY = 0 mm currentZ",
"take approximately 10.7 seconds. More generally, the formula used is,",
"= totalTime + moveTime = 0 + 0.002 = 0.002",
"How should Acceleration and Jerk be considered; and, how do",
"print time. I've seen that some forums state that the",
"especially Acceleration X, Acceleration Y, Acceleration Z, Jerk, and Z-Jerk.",
"0.2 mm moveTime = segmentLength / mmPerSecond = 0.2 /",
"= 158.878 - 0 = 158.878 mm deltaY = newY",
"as follows: 1. It scans the entire G-code file to",
"= totalTime + moveTime = 0.002 + 10.755 = 10.757",
"G-code file for an already sliced model. The program works",
"/ mmPerSecond ``` By summing up all the move times,",
"the time for each move by dividing segment distance by",
"mm newY = 27.769 mm mmPerSecond = 900 / 60",
"currentY = 0 mm currentZ = 0 mm # G1",
"mmPerSecond = 5400 / 60 = 90 mm/s deltaZ =",
"mm # G1 Z0.200 F5400.000 newZ = 0.2 mm mmPerSecond",
"works as follows: 1. It scans the entire G-code file",
"moveTime = segmentLength / mmPerSecond = 0.2 / 90 =",
"= 0.2 mm moveTime = segmentLength / mmPerSecond = 0.2",
"the formula used is, for each movement: ``` moveTime =",
"down the print time? 2. How should I edit my",
"segmentLength = square_root(deltaX² + deltaY²) = 161.287 mm moveTime =",
"to make it possible to use those values to more",
"up all the move times, we have the total estimated",
"sliced model. The program works and it's pretty accurate. It",
"X158.878 Y27.769 E6.65594 F900.000 newX = 158.878 mm newY =",
"s # G1 X158.878 Y27.769 E6.65594 F900.000 newX = 158.878",
"90 mm/s deltaZ = newZ - currentZ = 0.2 -",
"10.755 s totalTime = totalTime + moveTime = 0.002 +",
"``` G28 ; home all axes G1 Z0.200 F5400.000 G1",
"In this example, the print will take approximately 10.7 seconds.",
"= 10.757 s ``` In this example, the print will",
"= deltaZ / mmPerSecond = 161.287 / 15 = 10.755",
"27.769 mm segmentLength = square_root(deltaX² + deltaY²) = 161.287 mm",
"X158.878 Y27.769 E6.65594 F900.000 ``` This is the calculation it",
"by the speed in mm/s. Let's assume this is the",
"totalTime = 0 # G28 ; home all axes currentX",
"printer, especially Acceleration X, Acceleration Y, Acceleration Z, Jerk, and",
"print time; however, I don't understand how those values affect",
"= segmentLength / mmPerSecond = 0.2 / 90 = 0.002",
"0.002 + 10.755 = 10.757 s ``` In this example,",
"deltaX = newX - currentX = 158.878 - 0 =",
"example, the print will take approximately 10.7 seconds. More generally,",
"``` moveTime = segmentLength / mmPerSecond ``` By summing up",
"follows: 1. It scans the entire G-code file to identify",
"for each move by dividing segment distance by the speed",
"F900.000 ``` This is the calculation it does: ``` totalTime",
"G1 X158.878 Y27.769 E6.65594 F900.000 newX = 158.878 mm newY",
"mmPerSecond = 161.287 / 15 = 10.755 s totalTime =",
"totalTime = totalTime + moveTime = 0.002 + 10.755 =",
"values affect the move time: 1. How should Acceleration and",
"0.002 s # G1 X158.878 Y27.769 E6.65594 F900.000 newX =",
"do they speed up or slow down the print time?",
"- 0 = 27.769 mm segmentLength = square_root(deltaX² + deltaY²)",
"up or slow down the print time? 2. How should",
"Jerk be considered; and, how do they speed up or",
"158.878 mm newY = 27.769 mm mmPerSecond = 900 /",
"Acceleration and Jerk be considered; and, how do they speed",
"161.287 mm moveTime = deltaZ / mmPerSecond = 161.287 /",
"10.7 seconds. More generally, the formula used is, for each",
"scans the entire G-code file to identify all of the",
"make it possible to use those values to more accurately",
"segmentLength = deltaZ = 0.2 mm moveTime = segmentLength /",
"mm deltaY = newY - currentY = 27.769 - 0",
"deltaZ = newZ - currentZ = 0.2 - 0 =",
"Z, Jerk, and Z-Jerk. I'd like to make it possible",
"newY - currentY = 27.769 - 0 = 27.769 mm",
"time also depends on some settings on the 3D printer,",
"G28 ; home all axes currentX = 0 mm currentY",
"X, Acceleration Y, Acceleration Z, Jerk, and Z-Jerk. I'd like",
"G1 Z0.200 F5400.000 newZ = 0.2 mm mmPerSecond = 5400",
"/ 90 = 0.002 s totalTime = totalTime + moveTime",
"Jerk, and Z-Jerk. I'd like to make it possible to",
"total print time from the G-code file for an already",
"they speed up or slow down the print time? 2.",
"don't understand how those values affect the move time: 1.",
"the move time: 1. How should Acceleration and Jerk be",
"formula used is, for each movement: ``` moveTime = segmentLength",
"Z0.200 F5400.000 newZ = 0.2 mm mmPerSecond = 5400 /",
"the total estimated print time. I've seen that some forums",
"0.002 = 0.002 s # G1 X158.878 Y27.769 E6.65594 F900.000",
"= 27.769 - 0 = 27.769 mm segmentLength = square_root(deltaX²",
"It works as follows: 1. It scans the entire G-code",
"settings on the 3D printer, especially Acceleration X, Acceleration Y,",
"we have the total estimated print time. I've seen that",
"by dividing segment distance by the speed in mm/s. Let's",
"assume this is the G-code: ``` G28 ; home all",
"deltaZ = 0.2 mm moveTime = segmentLength / mmPerSecond =",
"mm moveTime = segmentLength / mmPerSecond = 0.2 / 90",
"to use those values to more accurately calculate print time;",
"G-code: ``` G28 ; home all axes G1 Z0.200 F5400.000",
"+ moveTime = 0 + 0.002 = 0.002 s #",
"currentZ = 0.2 - 0 = 0.2 mm segmentLength =",
"3D print time also depends on some settings on the",
"mm currentZ = 0 mm # G1 Z0.200 F5400.000 newZ",
"``` In this example, the print will take approximately 10.7",
"print time from the G-code file for an already sliced",
"Let's assume this is the G-code: ``` G28 ; home",
"= 900 / 60 = 15 mm/s deltaX = newX",
"0.2 - 0 = 0.2 mm segmentLength = deltaZ =",
"+ moveTime = 0.002 + 10.755 = 10.757 s ```",
"how those values affect the move time: 1. How should",
"27.769 mm mmPerSecond = 900 / 60 = 15 mm/s",
"values to more accurately calculate print time; however, I don't",
"/ mmPerSecond = 0.2 / 90 = 0.002 s totalTime",
"slow down the print time? 2. How should I edit",
"seconds. More generally, the formula used is, for each movement:",
"does: ``` totalTime = 0 # G28 ; home all",
"0.2 mm segmentLength = deltaZ = 0.2 mm moveTime =",
"this is the G-code: ``` G28 ; home all axes",
"on the 3D printer, especially Acceleration X, Acceleration Y, Acceleration",
"Y27.769 E6.65594 F900.000 ``` This is the calculation it does:",
"= 90 mm/s deltaZ = newZ - currentZ = 0.2",
"order to include Acceleration and Jerk in the print time",
"each move by dividing segment distance by the speed in",
"for an already sliced model. The program works and it's",
"all axes currentX = 0 mm currentY = 0 mm",
"newZ = 0.2 mm mmPerSecond = 5400 / 60 =",
"also depends on some settings on the 3D printer, especially",
"that some forums state that the 3D print time also",
"time; however, I don't understand how those values affect the",
"60 = 15 mm/s deltaX = newX - currentX =",
"estimated total print time from the G-code file for an",
"moveTime = segmentLength / mmPerSecond ``` By summing up all",
"totalTime = totalTime + moveTime = 0 + 0.002 =",
"the 3D printer, especially Acceleration X, Acceleration Y, Acceleration Z,",
"Y27.769 E6.65594 F900.000 newX = 158.878 mm newY = 27.769",
"I don't understand how those values affect the move time:",
"= 0.002 s totalTime = totalTime + moveTime = 0",
"print time? 2. How should I edit my formula in",
"15 mm/s deltaX = newX - currentX = 158.878 -",
"like to make it possible to use those values to",
"movements 2. It calculates the time for each move by",
"currentX = 158.878 - 0 = 158.878 mm deltaY =",
"the calculation it does: ``` totalTime = 0 # G28",
"5400 / 60 = 90 mm/s deltaZ = newZ -",
"time: 1. How should Acceleration and Jerk be considered; and,",
"G1 Z0.200 F5400.000 G1 X158.878 Y27.769 E6.65594 F900.000 ``` This",
"/ mmPerSecond = 161.287 / 15 = 10.755 s totalTime",
"considered; and, how do they speed up or slow down",
"= square_root(deltaX² + deltaY²) = 161.287 mm moveTime = deltaZ",
"be considered; and, how do they speed up or slow",
"mm mmPerSecond = 900 / 60 = 15 mm/s deltaX",
"is, for each movement: ``` moveTime = segmentLength / mmPerSecond",
"= newZ - currentZ = 0.2 - 0 = 0.2",
"on some settings on the 3D printer, especially Acceleration X,",
"formula in order to include Acceleration and Jerk in the",
"0 = 158.878 mm deltaY = newY - currentY =",
"- 0 = 158.878 mm deltaY = newY - currentY",
"file to identify all of the movements 2. It calculates",
"used is, for each movement: ``` moveTime = segmentLength /",
"each movement: ``` moveTime = segmentLength / mmPerSecond ``` By",
"By summing up all the move times, we have the",
"G1 X158.878 Y27.769 E6.65594 F900.000 ``` This is the calculation",
"mm/s. Let's assume this is the G-code: ``` G28 ;",
"Acceleration Y, Acceleration Z, Jerk, and Z-Jerk. I'd like to",
"This is the calculation it does: ``` totalTime = 0",
"0.2 mm mmPerSecond = 5400 / 60 = 90 mm/s",
"161.287 / 15 = 10.755 s totalTime = totalTime +",
"deltaY = newY - currentY = 27.769 - 0 =",
"an application that calculates the estimated total print time from",
"axes G1 Z0.200 F5400.000 G1 X158.878 Y27.769 E6.65594 F900.000 ```",
"0.2 / 90 = 0.002 s totalTime = totalTime +",
"understand how those values affect the move time: 1. How",
"calculation it does: ``` totalTime = 0 # G28 ;",
"moveTime = 0.002 + 10.755 = 10.757 s ``` In",
"segment distance by the speed in mm/s. Let's assume this",
"dividing segment distance by the speed in mm/s. Let's assume",
"that calculates the estimated total print time from the G-code",
"the G-code file for an already sliced model. The program",
"will take approximately 10.7 seconds. More generally, the formula used",
"2. How should I edit my formula in order to",
"It calculates the time for each move by dividing segment",
"application that calculates the estimated total print time from the",
"- currentZ = 0.2 - 0 = 0.2 mm segmentLength",
"= segmentLength / mmPerSecond ``` By summing up all the",
"90 = 0.002 s totalTime = totalTime + moveTime =",
"program works and it's pretty accurate. It works as follows:",
"Z0.200 F5400.000 G1 X158.878 Y27.769 E6.65594 F900.000 ``` This is",
"= 0.2 mm mmPerSecond = 5400 / 60 = 90",
"; home all axes currentX = 0 mm currentY =",
"I'd like to make it possible to use those values",
"158.878 - 0 = 158.878 mm deltaY = newY -",
"= 158.878 mm deltaY = newY - currentY = 27.769",
"1. It scans the entire G-code file to identify all",
"mmPerSecond = 0.2 / 90 = 0.002 s totalTime =",
"more accurately calculate print time; however, I don't understand how",
"moveTime = 0 + 0.002 = 0.002 s # G1",
"distance by the speed in mm/s. Let's assume this is",
"home all axes currentX = 0 mm currentY = 0",
"= 158.878 mm newY = 27.769 mm mmPerSecond = 900",
"forums state that the 3D print time also depends on",
"started to write an application that calculates the estimated total",
"the move times, we have the total estimated print time.",
"identify all of the movements 2. It calculates the time",
"= 27.769 mm mmPerSecond = 900 / 60 = 15",
"in order to include Acceleration and Jerk in the print",
"= 0.2 - 0 = 0.2 mm segmentLength = deltaZ",
"possible to use those values to more accurately calculate print",
"the G-code: ``` G28 ; home all axes G1 Z0.200",
"0 = 0.2 mm segmentLength = deltaZ = 0.2 mm",
"deltaY²) = 161.287 mm moveTime = deltaZ / mmPerSecond =",
"total estimated print time. I've seen that some forums state",
"should I edit my formula in order to include Acceleration",
"= 10.755 s totalTime = totalTime + moveTime = 0.002",
"mm moveTime = deltaZ / mmPerSecond = 161.287 / 15",
"times, we have the total estimated print time. I've seen",
"= 161.287 / 15 = 10.755 s totalTime = totalTime",
"movement: ``` moveTime = segmentLength / mmPerSecond ``` By summing",
"10.755 = 10.757 s ``` In this example, the print",
"of the movements 2. It calculates the time for each",
"= 0 # G28 ; home all axes currentX =",
"G-code file to identify all of the movements 2. It",
"``` totalTime = 0 # G28 ; home all axes",
"currentY = 27.769 - 0 = 27.769 mm segmentLength =",
"= 15 mm/s deltaX = newX - currentX = 158.878",
"- currentY = 27.769 - 0 = 27.769 mm segmentLength",
"in mm/s. Let's assume this is the G-code: ``` G28",
"already sliced model. The program works and it's pretty accurate.",
"newZ - currentZ = 0.2 - 0 = 0.2 mm",
"= 0.2 mm segmentLength = deltaZ = 0.2 mm moveTime",
"speed in mm/s. Let's assume this is the G-code: ```",
"10.757 s ``` In this example, the print will take",
"2. It calculates the time for each move by dividing",
"# G28 ; home all axes currentX = 0 mm",
"= 0.002 s # G1 X158.878 Y27.769 E6.65594 F900.000 newX",
"= 5400 / 60 = 90 mm/s deltaZ = newZ",
"+ 10.755 = 10.757 s ``` In this example, the",
"27.769 - 0 = 27.769 mm segmentLength = square_root(deltaX² +",
"print will take approximately 10.7 seconds. More generally, the formula",
"F900.000 newX = 158.878 mm newY = 27.769 mm mmPerSecond",
"speed up or slow down the print time? 2. How",
"the print time? 2. How should I edit my formula",
"time for each move by dividing segment distance by the",
"= 0 + 0.002 = 0.002 s # G1 X158.878",
"time. I've seen that some forums state that the 3D",
"158.878 mm deltaY = newY - currentY = 27.769 -",
"and Jerk be considered; and, how do they speed up",
"= newX - currentX = 158.878 - 0 = 158.878",
"moveTime = deltaZ / mmPerSecond = 161.287 / 15 =",
"= 0 mm currentZ = 0 mm # G1 Z0.200",
"``` By summing up all the move times, we have",
"or slow down the print time? 2. How should I",
"some settings on the 3D printer, especially Acceleration X, Acceleration",
"affect the move time: 1. How should Acceleration and Jerk",
"totalTime + moveTime = 0.002 + 10.755 = 10.757 s",
"those values affect the move time: 1. How should Acceleration",
"0 = 27.769 mm segmentLength = square_root(deltaX² + deltaY²) =",
"newY = 27.769 mm mmPerSecond = 900 / 60 =",
"it does: ``` totalTime = 0 # G28 ; home",
"deltaZ / mmPerSecond = 161.287 / 15 = 10.755 s",
"to write an application that calculates the estimated total print",
"# G1 X158.878 Y27.769 E6.65594 F900.000 newX = 158.878 mm",
"totalTime + moveTime = 0 + 0.002 = 0.002 s",
"model. The program works and it's pretty accurate. It works",
"Acceleration Z, Jerk, and Z-Jerk. I'd like to make it",
"entire G-code file to identify all of the movements 2.",
"mmPerSecond ``` By summing up all the move times, we",
"0 + 0.002 = 0.002 s # G1 X158.878 Y27.769",
"How should I edit my formula in order to include",
"is the G-code: ``` G28 ; home all axes G1",
"all axes G1 Z0.200 F5400.000 G1 X158.878 Y27.769 E6.65594 F900.000",
"home all axes G1 Z0.200 F5400.000 G1 X158.878 Y27.769 E6.65594",
"move times, we have the total estimated print time. I've",
"Z-Jerk. I'd like to make it possible to use those",
"print time also depends on some settings on the 3D",
"segmentLength / mmPerSecond = 0.2 / 90 = 0.002 s",
"= 0.002 + 10.755 = 10.757 s ``` In this",
"Y, Acceleration Z, Jerk, and Z-Jerk. I'd like to make",
"= 161.287 mm moveTime = deltaZ / mmPerSecond = 161.287",
"accurately calculate print time; however, I don't understand how those",
"that the 3D print time also depends on some settings",
"mm segmentLength = deltaZ = 0.2 mm moveTime = segmentLength",
"approximately 10.7 seconds. More generally, the formula used is, for",
"estimated print time. I've seen that some forums state that",
"move by dividing segment distance by the speed in mm/s.",
"summing up all the move times, we have the total",
"time from the G-code file for an already sliced model.",
"state that the 3D print time also depends on some",
"all the move times, we have the total estimated print",
"currentZ = 0 mm # G1 Z0.200 F5400.000 newZ =",
"the print will take approximately 10.7 seconds. More generally, the",
"G28 ; home all axes G1 Z0.200 F5400.000 G1 X158.878",
"all of the movements 2. It calculates the time for",
"s totalTime = totalTime + moveTime = 0.002 + 10.755",
"0 mm currentZ = 0 mm # G1 Z0.200 F5400.000",
"60 = 90 mm/s deltaZ = newZ - currentZ =",
"accurate. It works as follows: 1. It scans the entire",
"+ deltaY²) = 161.287 mm moveTime = deltaZ / mmPerSecond",
"s totalTime = totalTime + moveTime = 0 + 0.002",
"- 0 = 0.2 mm segmentLength = deltaZ = 0.2",
"segmentLength / mmPerSecond ``` By summing up all the move",
"3D printer, especially Acceleration X, Acceleration Y, Acceleration Z, Jerk,",
"how do they speed up or slow down the print",
"the estimated total print time from the G-code file for",
"mm/s deltaX = newX - currentX = 158.878 - 0",
"0.002 s totalTime = totalTime + moveTime = 0 +",
"and it's pretty accurate. It works as follows: 1. It",
"900 / 60 = 15 mm/s deltaX = newX -",
"time? 2. How should I edit my formula in order",
"generally, the formula used is, for each movement: ``` moveTime",
"however, I don't understand how those values affect the move",
"depends on some settings on the 3D printer, especially Acceleration",
"mm segmentLength = square_root(deltaX² + deltaY²) = 161.287 mm moveTime",
"The program works and it's pretty accurate. It works as",
"0 mm # G1 Z0.200 F5400.000 newZ = 0.2 mm",
"from the G-code file for an already sliced model. The",
"- currentX = 158.878 - 0 = 158.878 mm deltaY",
"calculate print time; however, I don't understand how those values",
"# G1 Z0.200 F5400.000 newZ = 0.2 mm mmPerSecond =",
"have the total estimated print time. I've seen that some",
"``` This is the calculation it does: ``` totalTime =",
"mm mmPerSecond = 5400 / 60 = 90 mm/s deltaZ",
"= deltaZ = 0.2 mm moveTime = segmentLength / mmPerSecond",
"= 0 mm # G1 Z0.200 F5400.000 newZ = 0.2",
"some forums state that the 3D print time also depends",
"those values to more accurately calculate print time; however, I",
"for each movement: ``` moveTime = segmentLength / mmPerSecond ```",
"newX = 158.878 mm newY = 27.769 mm mmPerSecond =",
"I edit my formula in order to include Acceleration and",
"0 # G28 ; home all axes currentX = 0",
"to more accurately calculate print time; however, I don't understand",
"seen that some forums state that the 3D print time",
"/ 60 = 90 mm/s deltaZ = newZ - currentZ",
"newX - currentX = 158.878 - 0 = 158.878 mm",
"currentX = 0 mm currentY = 0 mm currentZ =",
"it possible to use those values to more accurately calculate",
"my formula in order to include Acceleration and Jerk in",
"E6.65594 F900.000 ``` This is the calculation it does: ```",
"to include Acceleration and Jerk in the print time calculation?",
"= 0 mm currentY = 0 mm currentZ = 0",
"the 3D print time also depends on some settings on",
"More generally, the formula used is, for each movement: ```",
"calculates the time for each move by dividing segment distance",
"this example, the print will take approximately 10.7 seconds. More",
"= 27.769 mm segmentLength = square_root(deltaX² + deltaY²) = 161.287",
"F5400.000 G1 X158.878 Y27.769 E6.65594 F900.000 ``` This is the",
"use those values to more accurately calculate print time; however,",
"move time: 1. How should Acceleration and Jerk be considered;",
"+ 0.002 = 0.002 s # G1 X158.878 Y27.769 E6.65594",
"calculates the estimated total print time from the G-code file",
"/ 60 = 15 mm/s deltaX = newX - currentX",
"pretty accurate. It works as follows: 1. It scans the",
"the speed in mm/s. Let's assume this is the G-code:",
"it's pretty accurate. It works as follows: 1. It scans",
"should Acceleration and Jerk be considered; and, how do they",
"/ 15 = 10.755 s totalTime = totalTime + moveTime",
"I've seen that some forums state that the 3D print"
] |
[
"a different printer it works. I'd appreciate suggestions for how",
"the job and the extruder to a different printer it",
"extruder to a different printer it works. I'd appreciate suggestions",
"with no luck. But, if I move the job and",
"works. I'd appreciate suggestions for how to sort this out.",
"of them I have considerable trouble with \"thin\" prints and",
"run a high school 3D printer lab and we have",
"I run a high school 3D printer lab and we",
"with \"thin\" prints and filament slip warnings. So far I've",
"I've tried changing extruders and using different filament rolls with",
"no luck. But, if I move the job and the",
"filament slip warnings. So far I've tried changing extruders and",
"rolls with no luck. But, if I move the job",
"if I move the job and the extruder to a",
"a high school 3D printer lab and we have several",
"I'd appreciate suggestions for how to sort this out. I",
"this out. I would have expected the slipping problems to",
"I move the job and the extruder to a different",
"have several 5th generation MakerBot printers. On one of them",
"warnings. So far I've tried changing extruders and using different",
"tried changing extruders and using different filament rolls with no",
"for how to sort this out. I would have expected",
"how to sort this out. I would have expected the",
"the extruder to a different printer it works. I'd appreciate",
"move the job and the extruder to a different printer",
"\"thin\" prints and filament slip warnings. So far I've tried",
"I would have expected the slipping problems to follow the",
"and we have several 5th generation MakerBot printers. On one",
"prints and filament slip warnings. So far I've tried changing",
"appreciate suggestions for how to sort this out. I would",
"3D printer lab and we have several 5th generation MakerBot",
"I have considerable trouble with \"thin\" prints and filament slip",
"several 5th generation MakerBot printers. On one of them I",
"have considerable trouble with \"thin\" prints and filament slip warnings.",
"job and the extruder to a different printer it works.",
"to sort this out. I would have expected the slipping",
"slip warnings. So far I've tried changing extruders and using",
"MakerBot printers. On one of them I have considerable trouble",
"to a different printer it works. I'd appreciate suggestions for",
"On one of them I have considerable trouble with \"thin\"",
"school 3D printer lab and we have several 5th generation",
"suggestions for how to sort this out. I would have",
"high school 3D printer lab and we have several 5th",
"filament rolls with no luck. But, if I move the",
"luck. But, if I move the job and the extruder",
"we have several 5th generation MakerBot printers. On one of",
"extruders and using different filament rolls with no luck. But,",
"using different filament rolls with no luck. But, if I",
"printer it works. I'd appreciate suggestions for how to sort",
"and the extruder to a different printer it works. I'd",
"sort this out. I would have expected the slipping problems",
"and using different filament rolls with no luck. But, if",
"different printer it works. I'd appreciate suggestions for how to",
"out. I would have expected the slipping problems to follow",
"printer lab and we have several 5th generation MakerBot printers.",
"it works. I'd appreciate suggestions for how to sort this",
"different filament rolls with no luck. But, if I move",
"one of them I have considerable trouble with \"thin\" prints",
"them I have considerable trouble with \"thin\" prints and filament",
"lab and we have several 5th generation MakerBot printers. On",
"So far I've tried changing extruders and using different filament",
"generation MakerBot printers. On one of them I have considerable",
"considerable trouble with \"thin\" prints and filament slip warnings. So",
"changing extruders and using different filament rolls with no luck.",
"and filament slip warnings. So far I've tried changing extruders",
"trouble with \"thin\" prints and filament slip warnings. So far",
"far I've tried changing extruders and using different filament rolls",
"printers. On one of them I have considerable trouble with",
"But, if I move the job and the extruder to",
"would have expected the slipping problems to follow the extruder.",
"5th generation MakerBot printers. On one of them I have"
] |
[
"change the hotend of that printer or something to take",
"only takes 1.75 mm filament, I was wondering if it",
"use 3.0 mm filament is because it is cheaper than",
"buy only takes 1.75 mm filament, I was wondering if",
"reason I want to use 3.0 mm filament is because",
"buying a cheap 3D printer to get into 3D printing,",
"3D printing, but the printer I'm planning to buy only",
"wondering if it might be possible to change the hotend",
"be possible to change the hotend of that printer or",
"possible to change the hotend of that printer or something",
"I'm planning to buy only takes 1.75 mm filament, I",
"printer to get into 3D printing, but the printer I'm",
"planning on buying a cheap 3D printer to get into",
"the hotend of that printer or something to take in",
"mm filament, the reason I want to use 3.0 mm",
"but the printer I'm planning to buy only takes 1.75",
"want to use 3.0 mm filament is because it is",
"into 3D printing, but the printer I'm planning to buy",
"to use 3.0 mm filament is because it is cheaper",
"mm filament is because it is cheaper than 1.75 mm",
"was wondering if it might be possible to change the",
"hotend of that printer or something to take in 3.0",
"the reason I want to use 3.0 mm filament is",
"I was wondering if it might be possible to change",
"might be possible to change the hotend of that printer",
"take in 3.0 mm filament, the reason I want to",
"printing, but the printer I'm planning to buy only takes",
"I want to use 3.0 mm filament is because it",
"filament is because it is cheaper than 1.75 mm filament.",
"in 3.0 mm filament, the reason I want to use",
"3.0 mm filament, the reason I want to use 3.0",
"on buying a cheap 3D printer to get into 3D",
"a cheap 3D printer to get into 3D printing, but",
"printer I'm planning to buy only takes 1.75 mm filament,",
"the printer I'm planning to buy only takes 1.75 mm",
"cheap 3D printer to get into 3D printing, but the",
"printer or something to take in 3.0 mm filament, the",
"or something to take in 3.0 mm filament, the reason",
"that printer or something to take in 3.0 mm filament,",
"to get into 3D printing, but the printer I'm planning",
"planning to buy only takes 1.75 mm filament, I was",
"3.0 mm filament is because it is cheaper than 1.75",
"to change the hotend of that printer or something to",
"takes 1.75 mm filament, I was wondering if it might",
"mm filament, I was wondering if it might be possible",
"if it might be possible to change the hotend of",
"of that printer or something to take in 3.0 mm",
"to take in 3.0 mm filament, the reason I want",
"something to take in 3.0 mm filament, the reason I",
"3D printer to get into 3D printing, but the printer",
"filament, the reason I want to use 3.0 mm filament",
"get into 3D printing, but the printer I'm planning to",
"am planning on buying a cheap 3D printer to get",
"to buy only takes 1.75 mm filament, I was wondering",
"I am planning on buying a cheap 3D printer to",
"filament, I was wondering if it might be possible to",
"it might be possible to change the hotend of that",
"1.75 mm filament, I was wondering if it might be"
] |
[
"loose. Using an Ultimaker 2, what should be my expectations",
"well fitting parts? Using a tool like Openscad to generate",
"printed some cogs that were supposed to be able to",
"the shaft about 0.1 mm smaller than the center hole",
"hole slightly and sand down the shaft. I then found",
"found that the boring was imprecise and the center of",
"parts is really useful because it facilitates the creation of",
"to rotate freely around a shaft, which was also printed.",
"cogs and drive shafts, which also have precise dimensions. The",
"friction, but also aren't excessively loose. Using an Ultimaker 2,",
"of geometrically precise parts such as cogs and drive shafts,",
"the shaft. I then found that the boring was imprecise",
"useful because it facilitates the creation of geometrically precise parts",
"parts? Using a tool like Openscad to generate parametric parts",
"would I go about produce well fitting parts? Using a",
"cogs that were supposed to be able to rotate freely",
"without excessive friction, but also aren't excessively loose. Using an",
"produce well fitting parts? Using a tool like Openscad to",
"problem arises when the parts are printed and joined together.",
"however I found that I had to bore out the",
"to print moving parts that fit well enough to move",
"mm smaller than the center hole of the cog expecting",
"found that I had to bore out the center hole",
"rotate freely around a shaft, which was also printed. I",
"dimensions. The problem arises when the parts are printed and",
"Ultimaker 2, what should be my expectations be, and how",
"Using an Ultimaker 2, what should be my expectations be,",
"center hole of the cog expecting it to be able",
"be, and how would I go about produce well fitting",
"Using a tool like Openscad to generate parametric parts is",
"a tool like Openscad to generate parametric parts is really",
"than the center hole of the cog expecting it to",
"such as cogs and drive shafts, which also have precise",
"an Ultimaker 2, what should be my expectations be, and",
"Openscad to generate parametric parts is really useful because it",
"really like to be able to print moving parts that",
"as cogs and drive shafts, which also have precise dimensions.",
"enough to move without excessive friction, but also aren't excessively",
"precise parts such as cogs and drive shafts, which also",
"well enough to move without excessive friction, but also aren't",
"what should be my expectations be, and how would I",
"it facilitates the creation of geometrically precise parts such as",
"to be able to rotate freely, however I found that",
"because it facilitates the creation of geometrically precise parts such",
"I found that I had to bore out the center",
"parts that fit well enough to move without excessive friction,",
"the center hole slightly and sand down the shaft. I",
"are printed and joined together. I recently printed some cogs",
"freely around a shaft, which was also printed. I made",
"I go about produce well fitting parts? Using a tool",
"be able to print moving parts that fit well enough",
"I then found that the boring was imprecise and the",
"that fit well enough to move without excessive friction, but",
"about 0.1 mm smaller than the center hole of the",
"moving parts that fit well enough to move without excessive",
"have precise dimensions. The problem arises when the parts are",
"excessively loose. Using an Ultimaker 2, what should be my",
"when the parts are printed and joined together. I recently",
"aren't excessively loose. Using an Ultimaker 2, what should be",
"creation of geometrically precise parts such as cogs and drive",
"to be able to rotate freely around a shaft, which",
"about produce well fitting parts? Using a tool like Openscad",
"facilitates the creation of geometrically precise parts such as cogs",
"to rotate freely, however I found that I had to",
"to bore out the center hole slightly and sand down",
"slightly and sand down the shaft. I then found that",
"should be my expectations be, and how would I go",
"cog expecting it to be able to rotate freely, however",
"supposed to be able to rotate freely around a shaft,",
"smaller than the center hole of the cog expecting it",
"parts such as cogs and drive shafts, which also have",
"then found that the boring was imprecise and the center",
"generate parametric parts is really useful because it facilitates the",
"joined together. I recently printed some cogs that were supposed",
"the creation of geometrically precise parts such as cogs and",
"parts are printed and joined together. I recently printed some",
"my expectations be, and how would I go about produce",
"able to print moving parts that fit well enough to",
"also aren't excessively loose. Using an Ultimaker 2, what should",
"would really like to be able to print moving parts",
"recently printed some cogs that were supposed to be able",
"center hole slightly and sand down the shaft. I then",
"which was also printed. I made the shaft about 0.1",
"how would I go about produce well fitting parts? Using",
"were supposed to be able to rotate freely around a",
"and drive shafts, which also have precise dimensions. The problem",
"expecting it to be able to rotate freely, however I",
"shaft. I then found that the boring was imprecise and",
"I would really like to be able to print moving",
"2, what should be my expectations be, and how would",
"excessive friction, but also aren't excessively loose. Using an Ultimaker",
"I recently printed some cogs that were supposed to be",
"fitting parts? Using a tool like Openscad to generate parametric",
"together. I recently printed some cogs that were supposed to",
"expectations be, and how would I go about produce well",
"be my expectations be, and how would I go about",
"printed and joined together. I recently printed some cogs that",
"freely, however I found that I had to bore out",
"that the boring was imprecise and the center of rotation",
"the cog expecting it to be able to rotate freely,",
"I had to bore out the center hole slightly and",
"out the center hole slightly and sand down the shaft.",
"a shaft, which was also printed. I made the shaft",
"0.1 mm smaller than the center hole of the cog",
"tool like Openscad to generate parametric parts is really useful",
"that were supposed to be able to rotate freely around",
"be able to rotate freely, however I found that I",
"shaft about 0.1 mm smaller than the center hole of",
"fit well enough to move without excessive friction, but also",
"which also have precise dimensions. The problem arises when the",
"and joined together. I recently printed some cogs that were",
"go about produce well fitting parts? Using a tool like",
"I made the shaft about 0.1 mm smaller than the",
"made the shaft about 0.1 mm smaller than the center",
"able to rotate freely, however I found that I had",
"The problem arises when the parts are printed and joined",
"to generate parametric parts is really useful because it facilitates",
"able to rotate freely around a shaft, which was also",
"shaft, which was also printed. I made the shaft about",
"drive shafts, which also have precise dimensions. The problem arises",
"geometrically precise parts such as cogs and drive shafts, which",
"boring was imprecise and the center of rotation was off",
"also printed. I made the shaft about 0.1 mm smaller",
"the parts are printed and joined together. I recently printed",
"bore out the center hole slightly and sand down the",
"really useful because it facilitates the creation of geometrically precise",
"be able to rotate freely around a shaft, which was",
"precise dimensions. The problem arises when the parts are printed",
"had to bore out the center hole slightly and sand",
"some cogs that were supposed to be able to rotate",
"but also aren't excessively loose. Using an Ultimaker 2, what",
"parametric parts is really useful because it facilitates the creation",
"is really useful because it facilitates the creation of geometrically",
"was imprecise and the center of rotation was off center.",
"also have precise dimensions. The problem arises when the parts",
"around a shaft, which was also printed. I made the",
"to move without excessive friction, but also aren't excessively loose.",
"it to be able to rotate freely, however I found",
"move without excessive friction, but also aren't excessively loose. Using",
"printed. I made the shaft about 0.1 mm smaller than",
"the boring was imprecise and the center of rotation was",
"down the shaft. I then found that the boring was",
"shafts, which also have precise dimensions. The problem arises when",
"that I had to bore out the center hole slightly",
"print moving parts that fit well enough to move without",
"like Openscad to generate parametric parts is really useful because",
"the center hole of the cog expecting it to be",
"like to be able to print moving parts that fit",
"arises when the parts are printed and joined together. I",
"was also printed. I made the shaft about 0.1 mm",
"of the cog expecting it to be able to rotate",
"hole of the cog expecting it to be able to",
"to be able to print moving parts that fit well",
"and how would I go about produce well fitting parts?",
"rotate freely, however I found that I had to bore",
"and sand down the shaft. I then found that the",
"sand down the shaft. I then found that the boring"
] |
[
"as good as possible. So, my question: Do quality of",
"So, my question: Do quality of geometry matters when 3d",
"possible. So, my question: Do quality of geometry matters when",
"a 3d printer so can't really experiment on my own,",
"3d print I want to get it as good as",
"can't really experiment on my own, which means that when",
"but couldn't find anything. I do not have a 3d",
"printer so can't really experiment on my own, which means",
"I am going to order a 3d print I want",
"quads, or ngons are fine? Are there shapes to avoid?",
"I want to get it as good as possible. So,",
"quality of geometry matters when 3d printing? Will 3d printer",
"printing? Will 3d printer only print quads, or ngons are",
"3d printer only print quads, or ngons are fine? Are",
"it as good as possible. So, my question: Do quality",
"only print quads, or ngons are fine? Are there shapes",
"or ngons are fine? Are there shapes to avoid? Cheers",
"ngons are fine? Are there shapes to avoid? Cheers :)",
"so can't really experiment on my own, which means that",
"when I am going to order a 3d print I",
"print quads, or ngons are fine? Are there shapes to",
"Do quality of geometry matters when 3d printing? Will 3d",
"really experiment on my own, which means that when I",
"have a 3d printer so can't really experiment on my",
"3d printer so can't really experiment on my own, which",
"a 3d print I want to get it as good",
"get it as good as possible. So, my question: Do",
"as possible. So, my question: Do quality of geometry matters",
"print I want to get it as good as possible.",
"my own, which means that when I am going to",
"am going to order a 3d print I want to",
"of geometry matters when 3d printing? Will 3d printer only",
"do not have a 3d printer so can't really experiment",
"means that when I am going to order a 3d",
"when 3d printing? Will 3d printer only print quads, or",
"going to order a 3d print I want to get",
"want to get it as good as possible. So, my",
"3d printing? Will 3d printer only print quads, or ngons",
"I do not have a 3d printer so can't really",
"anything. I do not have a 3d printer so can't",
"not have a 3d printer so can't really experiment on",
"to order a 3d print I want to get it",
"my question: Do quality of geometry matters when 3d printing?",
"find anything. I do not have a 3d printer so",
"on my own, which means that when I am going",
"geometry matters when 3d printing? Will 3d printer only print",
"Will 3d printer only print quads, or ngons are fine?",
"matters when 3d printing? Will 3d printer only print quads,",
"printer only print quads, or ngons are fine? Are there",
"to get it as good as possible. So, my question:",
"tried searching but couldn't find anything. I do not have",
"question: Do quality of geometry matters when 3d printing? Will",
"own, which means that when I am going to order",
"couldn't find anything. I do not have a 3d printer",
"that when I am going to order a 3d print",
"order a 3d print I want to get it as",
"searching but couldn't find anything. I do not have a",
"are fine? Are there shapes to avoid? Cheers :) M.",
"good as possible. So, my question: Do quality of geometry",
"which means that when I am going to order a",
"experiment on my own, which means that when I am"
] |
[
"thread into plastic which will wear out faster.) If I",
"camera handle, which will be around 8\" long and will",
"where the camera will be mounted. (That way, I don't",
"way to get a solid chunk in the end of",
"unnecessarily solid. I only need a centimeter or two at",
"handle, which will be around 8\" long and will have",
"thick (1-2cm) without affecting the other walls? Is there some",
"Is there a way to get one particular wall in",
"other way to get a solid chunk in the end",
"which will be around 8\" long and will have a",
"way to get one particular wall in Cura to be",
"insert in the end, where the camera will be mounted.",
"Cura to 100%, the print will take a very long",
"around 8\" long and will have a brass camera thread",
"a very long time and will be unnecessarily solid. I",
"I'm trying to design a camera handle, which will be",
"into plastic which will wear out faster.) If I print",
"will be unnecessarily solid. I only need a centimeter or",
"8\" long and will have a brass camera thread insert",
"in Cura to be very thick (1-2cm) without affecting the",
"get a solid chunk in the end of the part?",
"to 100%, the print will take a very long time",
"wear out faster.) If I print the handle normally, the",
"centimeter or two at the end to be solid. Is",
"have to screw the camera thread into plastic which will",
"time and will be unnecessarily solid. I only need a",
"to be solid. Is there a way to get one",
"camera will be mounted. (That way, I don't have to",
"be very thick (1-2cm) without affecting the other walls? Is",
"handle won't be solid so I can't solidly put that",
"the camera thread into plastic which will wear out faster.)",
"the end of the handle won't be solid so I",
"very long time and will be unnecessarily solid. I only",
"so I can't solidly put that brass fitting in. If",
"I print the handle normally, the end of the handle",
"to get one particular wall in Cura to be very",
"plastic which will wear out faster.) If I print the",
"very thick (1-2cm) without affecting the other walls? Is there",
"wall in Cura to be very thick (1-2cm) without affecting",
"long time and will be unnecessarily solid. I only need",
"trying to design a camera handle, which will be around",
"be unnecessarily solid. I only need a centimeter or two",
"a brass camera thread insert in the end, where the",
"handle normally, the end of the handle won't be solid",
"be around 8\" long and will have a brass camera",
"other walls? Is there some other way to get a",
"one particular wall in Cura to be very thick (1-2cm)",
"If I set the fill in Cura to 100%, the",
"two at the end to be solid. Is there a",
"solid so I can't solidly put that brass fitting in.",
"the other walls? Is there some other way to get",
"take a very long time and will be unnecessarily solid.",
"have a brass camera thread insert in the end, where",
"solidly put that brass fitting in. If I set the",
"fill in Cura to 100%, the print will take a",
"end, where the camera will be mounted. (That way, I",
"end of the handle won't be solid so I can't",
"fitting in. If I set the fill in Cura to",
"at the end to be solid. Is there a way",
"solid. I only need a centimeter or two at the",
"without affecting the other walls? Is there some other way",
"If I print the handle normally, the end of the",
"the print will take a very long time and will",
"get one particular wall in Cura to be very thick",
"I only need a centimeter or two at the end",
"a camera handle, which will be around 8\" long and",
"will take a very long time and will be unnecessarily",
"thread insert in the end, where the camera will be",
"way, I don't have to screw the camera thread into",
"I don't have to screw the camera thread into plastic",
"Is there some other way to get a solid chunk",
"screw the camera thread into plastic which will wear out",
"will be around 8\" long and will have a brass",
"only need a centimeter or two at the end to",
"be solid so I can't solidly put that brass fitting",
"mounted. (That way, I don't have to screw the camera",
"the fill in Cura to 100%, the print will take",
"and will be unnecessarily solid. I only need a centimeter",
"to get a solid chunk in the end of the",
"can't solidly put that brass fitting in. If I set",
"walls? Is there some other way to get a solid",
"will be mounted. (That way, I don't have to screw",
"camera thread insert in the end, where the camera will",
"design a camera handle, which will be around 8\" long",
"in. If I set the fill in Cura to 100%,",
"brass fitting in. If I set the fill in Cura",
"to design a camera handle, which will be around 8\"",
"100%, the print will take a very long time and",
"a centimeter or two at the end to be solid.",
"be solid. Is there a way to get one particular",
"print will take a very long time and will be",
"be mounted. (That way, I don't have to screw the",
"the end, where the camera will be mounted. (That way,",
"solid. Is there a way to get one particular wall",
"to be very thick (1-2cm) without affecting the other walls?",
"long and will have a brass camera thread insert in",
"to screw the camera thread into plastic which will wear",
"I can't solidly put that brass fitting in. If I",
"will wear out faster.) If I print the handle normally,",
"the handle normally, the end of the handle won't be",
"there a way to get one particular wall in Cura",
"the handle won't be solid so I can't solidly put",
"put that brass fitting in. If I set the fill",
"particular wall in Cura to be very thick (1-2cm) without",
"will have a brass camera thread insert in the end,",
"set the fill in Cura to 100%, the print will",
"in Cura to 100%, the print will take a very",
"brass camera thread insert in the end, where the camera",
"out faster.) If I print the handle normally, the end",
"(That way, I don't have to screw the camera thread",
"the end to be solid. Is there a way to",
"won't be solid so I can't solidly put that brass",
"of the handle won't be solid so I can't solidly",
"there some other way to get a solid chunk in",
"that brass fitting in. If I set the fill in",
"faster.) If I print the handle normally, the end of",
"and will have a brass camera thread insert in the",
"a way to get one particular wall in Cura to",
"camera thread into plastic which will wear out faster.) If",
"the camera will be mounted. (That way, I don't have",
"(1-2cm) without affecting the other walls? Is there some other",
"Cura to be very thick (1-2cm) without affecting the other",
"affecting the other walls? Is there some other way to",
"print the handle normally, the end of the handle won't",
"end to be solid. Is there a way to get",
"in the end, where the camera will be mounted. (That",
"some other way to get a solid chunk in the",
"don't have to screw the camera thread into plastic which",
"I set the fill in Cura to 100%, the print",
"or two at the end to be solid. Is there",
"normally, the end of the handle won't be solid so",
"which will wear out faster.) If I print the handle",
"need a centimeter or two at the end to be"
] |
[
"the correct temperatures, 245°C for the extruder and 90°C for",
"90°C for the print bed. Then, I mount the SD",
"do that, the \"goal\" temperatures change to 195°C for the",
"print. However, once I do that, the \"goal\" temperatures change",
"printer gradually go down as the printer waits for it",
"and 90°C for the print bed. Then, I mount the",
"the \"goal\" temperatures change to 195°C for the extruder and",
"is going on here? I am trying PLA with the",
"on here? I am trying PLA with the same file,",
"model that came on the included SD card (`1.gcode`) with",
"match the \"goal\" temperature. This results in a failed print,",
"temperatures change to 195°C for the extruder and 50°C for",
"the included SD card (`1.gcode`) with ABS filament. I first",
"I first press \"`Preheat ABS`\" and wait for the display",
"it seems to work fine, although the temperature change still",
"the printer gradually go down as the printer waits for",
"gradually go down as the printer waits for it to",
"the extruder and 50°C for the print bed, and the",
"Monoprice Maker Select 3d printer (which is really just a",
"195°C for the extruder and 50°C for the print bed,",
"extruder in a clump. What is going on here? I",
"\"`Preheat ABS`\" and wait for the display to show the",
"\"goal\" temperatures change to 195°C for the extruder and 50°C",
"I mount the SD card and select the file to",
"with the filament sticking to the extruder in a clump.",
"for the display to show the correct temperatures, 245°C for",
"to 195°C for the extruder and 50°C for the print",
"select the file to print. However, once I do that,",
"What is going on here? I am trying PLA with",
"came on the included SD card (`1.gcode`) with ABS filament.",
"print bed. Then, I mount the SD card and select",
"Select 3d printer (which is really just a Wanhao Duplicator",
"file, and it seems to work fine, although the temperature",
"SD card (`1.gcode`) with ABS filament. I first press \"`Preheat",
"included SD card (`1.gcode`) with ABS filament. I first press",
"going on here? I am trying PLA with the same",
"have just got a Monoprice Maker Select 3d printer (which",
"the temperatures reported by the printer gradually go down as",
"the same file, and it seems to work fine, although",
"for the extruder and 50°C for the print bed, and",
"I have just got a Monoprice Maker Select 3d printer",
"a clump. What is going on here? I am trying",
"the \"goal\" temperature. This results in a failed print, with",
"to print a model that came on the included SD",
"a failed print, with the filament sticking to the extruder",
"ABS`\" and wait for the display to show the correct",
"SD card and select the file to print. However, once",
"the display to show the correct temperatures, 245°C for the",
"once I do that, the \"goal\" temperatures change to 195°C",
"correct temperatures, 245°C for the extruder and 90°C for the",
"extruder and 50°C for the print bed, and the temperatures",
"card and select the file to print. However, once I",
"got a Monoprice Maker Select 3d printer (which is really",
"mount the SD card and select the file to print.",
"Duplicator i3). I want to print a model that came",
"Maker Select 3d printer (which is really just a Wanhao",
"printer waits for it to match the \"goal\" temperature. This",
"just got a Monoprice Maker Select 3d printer (which is",
"However, once I do that, the \"goal\" temperatures change to",
"go down as the printer waits for it to match",
"and it seems to work fine, although the temperature change",
"I am trying PLA with the same file, and it",
"print a model that came on the included SD card",
"that came on the included SD card (`1.gcode`) with ABS",
"seems to work fine, although the temperature change still occurs.",
"and wait for the display to show the correct temperatures,",
"really just a Wanhao Duplicator i3). I want to print",
"Wanhao Duplicator i3). I want to print a model that",
"filament. I first press \"`Preheat ABS`\" and wait for the",
"reported by the printer gradually go down as the printer",
"for the print bed, and the temperatures reported by the",
"temperatures reported by the printer gradually go down as the",
"on the included SD card (`1.gcode`) with ABS filament. I",
"a model that came on the included SD card (`1.gcode`)",
"display to show the correct temperatures, 245°C for the extruder",
"the print bed. Then, I mount the SD card and",
"same file, and it seems to work fine, although the",
"with ABS filament. I first press \"`Preheat ABS`\" and wait",
"245°C for the extruder and 90°C for the print bed.",
"it to match the \"goal\" temperature. This results in a",
"results in a failed print, with the filament sticking to",
"is really just a Wanhao Duplicator i3). I want to",
"just a Wanhao Duplicator i3). I want to print a",
"\"goal\" temperature. This results in a failed print, with the",
"3d printer (which is really just a Wanhao Duplicator i3).",
"filament sticking to the extruder in a clump. What is",
"failed print, with the filament sticking to the extruder in",
"the file to print. However, once I do that, the",
"in a failed print, with the filament sticking to the",
"with the same file, and it seems to work fine,",
"and the temperatures reported by the printer gradually go down",
"first press \"`Preheat ABS`\" and wait for the display to",
"file to print. However, once I do that, the \"goal\"",
"card (`1.gcode`) with ABS filament. I first press \"`Preheat ABS`\"",
"the extruder in a clump. What is going on here?",
"to show the correct temperatures, 245°C for the extruder and",
"waits for it to match the \"goal\" temperature. This results",
"This results in a failed print, with the filament sticking",
"sticking to the extruder in a clump. What is going",
"printer (which is really just a Wanhao Duplicator i3). I",
"the SD card and select the file to print. However,",
"am trying PLA with the same file, and it seems",
"to the extruder in a clump. What is going on",
"a Monoprice Maker Select 3d printer (which is really just",
"press \"`Preheat ABS`\" and wait for the display to show",
"to print. However, once I do that, the \"goal\" temperatures",
"ABS filament. I first press \"`Preheat ABS`\" and wait for",
"that, the \"goal\" temperatures change to 195°C for the extruder",
"bed, and the temperatures reported by the printer gradually go",
"in a clump. What is going on here? I am",
"Then, I mount the SD card and select the file",
"clump. What is going on here? I am trying PLA",
"for it to match the \"goal\" temperature. This results in",
"to match the \"goal\" temperature. This results in a failed",
"show the correct temperatures, 245°C for the extruder and 90°C",
"and 50°C for the print bed, and the temperatures reported",
"trying PLA with the same file, and it seems to",
"I want to print a model that came on the",
"the print bed, and the temperatures reported by the printer",
"and select the file to print. However, once I do",
"down as the printer waits for it to match the",
"the filament sticking to the extruder in a clump. What",
"by the printer gradually go down as the printer waits",
"PLA with the same file, and it seems to work",
"(which is really just a Wanhao Duplicator i3). I want",
"print, with the filament sticking to the extruder in a",
"temperature. This results in a failed print, with the filament",
"here? I am trying PLA with the same file, and",
"for the print bed. Then, I mount the SD card",
"temperatures, 245°C for the extruder and 90°C for the print",
"the printer waits for it to match the \"goal\" temperature.",
"i3). I want to print a model that came on",
"bed. Then, I mount the SD card and select the",
"the extruder and 90°C for the print bed. Then, I",
"for the extruder and 90°C for the print bed. Then,",
"extruder and 90°C for the print bed. Then, I mount",
"change to 195°C for the extruder and 50°C for the",
"I do that, the \"goal\" temperatures change to 195°C for",
"print bed, and the temperatures reported by the printer gradually",
"(`1.gcode`) with ABS filament. I first press \"`Preheat ABS`\" and",
"50°C for the print bed, and the temperatures reported by",
"as the printer waits for it to match the \"goal\"",
"want to print a model that came on the included",
"wait for the display to show the correct temperatures, 245°C",
"a Wanhao Duplicator i3). I want to print a model"
] |
[
"my problem: I'm assembling a 3D printer with the RAMPS",
"12V 360W power supply and it is correct. I always",
"connecting the screen) and tried. The printer worked very well",
"problem. I have these endstops: [1 PZ di Alta Qualità",
"a component on the Arduino board burning. Searching the internet",
"electronics (set drivers, placed the jumpers, connected stepper motors...) and",
"powered the Arduino with USB and RAMPS 1.4 was connected",
"and it is correct. I always powered the Arduino with",
"thereby heating it up. I then proceeded to buy another",
"imballaggio indipendente kit fai da te](https://it.aliexpress.com/item/1PCS-High-Quality-Mechanical-Endstop-For-Reprap-ramps-1-4-3D-printer-With-independent-packing-diy/32454910275.html) and I connected the",
"After a few tests, however, I've noticed that the Arduino",
"di Alta Qualità Finecorsa Meccanico Per rampe Reprap 1.4 stampante",
"360W power supply and it is correct. I always powered",
"thermistor, endstops...) on the Arduino Mega. I've tried to connect,",
"voltage regulator. I heard also about unplugging the screen because",
"I then proceeded to buy another Arduino Mega. I also",
"Someone can tell me if I have done something wrong,",
"3D printer with the RAMPS 1.4 board and Arduino Mega.",
"I read that the endstops can cause this problem. I",
"stampante 3D Con imballaggio indipendente kit fai da te](https://it.aliexpress.com/item/1PCS-High-Quality-Mechanical-Endstop-For-Reprap-ramps-1-4-3D-printer-With-independent-packing-diy/32454910275.html) and",
"I've noticed that the Arduino was restarting several times and",
"it is correct. I always powered the Arduino with USB",
"to connect, via USB, to the computer and using the",
"my 12V 360W power supply and it is correct. I",
"voltage regulator, thereby heating it up. I then proceeded to",
"Arduino board. Someone can tell me if I have done",
"noticed that the Arduino was restarting several times and at",
"screen because it consumes a lot of current, that passes",
"because it consumes a lot of current, that passes through",
"through the voltage regulator, thereby heating it up. I then",
"the structure and the electronics (set drivers, placed the jumpers,",
"I've tried to connect, via USB, to the computer and",
"it up. I then proceeded to buy another Arduino Mega.",
"done something wrong, or is it the RAMPS board that",
"rampe Reprap 1.4 stampante 3D Con imballaggio indipendente kit fai",
"When the new Arduino arrived, I connected the whole (without",
"and the electronics (set drivers, placed the jumpers, connected stepper",
"Mega. I also checked the voltage of my 12V 360W",
"something wrong, or is it the RAMPS board that does",
"first Arduino board. Someone can tell me if I have",
"I have assembled the structure and the electronics (set drivers,",
"connected the black wire to GND, red wire to 5V",
"it consumes a lot of current, that passes through the",
"that does not work properly? ### EDIT: I read that",
"Alta Qualità Finecorsa Meccanico Per rampe Reprap 1.4 stampante 3D",
"and RAMPS 1.4 was connected to the power supply from",
"the new Arduino arrived, I connected the whole (without connecting",
"I saw a component on the Arduino board burning. Searching",
"saw that the burned component was the voltage regulator. I",
"power supply from the two terminals. [](https://i.stack.imgur.com/PFSWR.png) When the new Arduino arrived, I",
"assembled the structure and the electronics (set drivers, placed the",
"RAMPS 1.4](https://i.stack.imgur.com/PFSWR.png)](https://i.stack.imgur.com/PFSWR.png) When the new Arduino arrived, I connected the",
"1.4](https://i.stack.imgur.com/PFSWR.png)](https://i.stack.imgur.com/PFSWR.png) When the new Arduino arrived, I connected the whole",
"arrived, I connected the whole (without connecting the screen) and",
"giving the same problem as the first Arduino board. Someone",
"the voltage regulator. I heard also about unplugging the screen",
"point I saw a component on the Arduino board burning.",
"firmware (configuring: thermistor, endstops...) on the Arduino Mega. I've tried",
"well until it started giving the same problem as the",
"burned component was the voltage regulator. I heard also about",
"EDIT: I read that the endstops can cause this problem.",
"can cause this problem. I have these endstops: [1 PZ",
"a lot of current, that passes through the voltage regulator,",
"not work properly? ### EDIT: I read that the endstops",
"from the two terminals. [](https://i.stack.imgur.com/PFSWR.png) When",
"it started giving the same problem as the first Arduino",
"was restarting several times and at one point I saw",
"the endstops can cause this problem. I have these endstops:",
"3D Con imballaggio indipendente kit fai da te](https://it.aliexpress.com/item/1PCS-High-Quality-Mechanical-Endstop-For-Reprap-ramps-1-4-3D-printer-With-independent-packing-diy/32454910275.html) and I",
"internet I saw that the burned component was the voltage",
"wrong, or is it the RAMPS board that does not",
"the Repetier software I have commanded the printer which did",
"The printer worked very well until it started giving the",
"Repetier software I have commanded the printer which did do",
"Arduino Mega. I also checked the voltage of my 12V",
"I connected the black wire to GND, red wire to",
"and I connected the black wire to GND, red wire",
"the computer and using the Repetier software I have commanded",
"uploaded Marlin firmware (configuring: thermistor, endstops...) on the Arduino Mega.",
"the printer which did do some movement. The printer worked",
"another Arduino Mega. I also checked the voltage of my",
"connected the whole (without connecting the screen) and tried. The",
"to buy another Arduino Mega. I also checked the voltage",
"restarting several times and at one point I saw a",
"I saw that the burned component was the voltage regulator.",
"regulator. I heard also about unplugging the screen because it",
"I have done something wrong, or is it the RAMPS",
"the black wire to GND, red wire to 5V and",
"I have commanded the printer which did do some movement.",
"whole (without connecting the screen) and tried. The printer worked",
"This is my problem: I'm assembling a 3D printer with",
"consumes a lot of current, that passes through the voltage",
"Arduino Mega. I've tried to connect, via USB, to the",
"I connected the whole (without connecting the screen) and tried.",
"if I have done something wrong, or is it the",
"the internet I saw that the burned component was the",
"heating it up. I then proceeded to buy another Arduino",
"buy another Arduino Mega. I also checked the voltage of",
"that passes through the voltage regulator, thereby heating it up.",
"new Arduino arrived, I connected the whole (without connecting the",
"the voltage regulator, thereby heating it up. I then proceeded",
"via USB, to the computer and using the Repetier software",
"have assembled the structure and the electronics (set drivers, placed",
"times and at one point I saw a component on",
"the electronics (set drivers, placed the jumpers, connected stepper motors...)",
"terminals. [](https://i.stack.imgur.com/PFSWR.png) When the new Arduino",
"does not work properly? ### EDIT: I read that the",
"worked very well until it started giving the same problem",
"Arduino board burning. Searching the internet I saw that the",
"te](https://it.aliexpress.com/item/1PCS-High-Quality-Mechanical-Endstop-For-Reprap-ramps-1-4-3D-printer-With-independent-packing-diy/32454910275.html) and I connected the black wire to GND, red",
"also checked the voltage of my 12V 360W power supply",
"endstops: [1 PZ di Alta Qualità Finecorsa Meccanico Per rampe",
"started giving the same problem as the first Arduino board.",
"properly? ### EDIT: I read that the endstops can cause",
"several times and at one point I saw a component",
"USB, to the computer and using the Repetier software I",
"the Arduino with USB and RAMPS 1.4 was connected to",
"the screen) and tried. The printer worked very well until",
"of RAMPS 1.4](https://i.stack.imgur.com/PFSWR.png)](https://i.stack.imgur.com/PFSWR.png) When the new Arduino arrived, I connected",
"screen) and tried. The printer worked very well until it",
"GND, red wire to 5V and the green wire to",
"motors...) and have uploaded Marlin firmware (configuring: thermistor, endstops...) on",
"regulator, thereby heating it up. I then proceeded to buy",
"and tried. The printer worked very well until it started",
"wire to GND, red wire to 5V and the green",
"work properly? ### EDIT: I read that the endstops can",
"the Arduino Mega. I've tried to connect, via USB, to",
"lot of current, that passes through the voltage regulator, thereby",
"voltage of my 12V 360W power supply and it is",
"board burning. Searching the internet I saw that the burned",
"component was the voltage regulator. I heard also about unplugging",
"board. Someone can tell me if I have done something",
"connected stepper motors...) and have uploaded Marlin firmware (configuring: thermistor,",
"burning. Searching the internet I saw that the burned component",
"Mega. I've tried to connect, via USB, to the computer",
"connected to the power supply from the two terminals. [ and I connected",
"read that the endstops can cause this problem. I have",
"PZ di Alta Qualità Finecorsa Meccanico Per rampe Reprap 1.4",
"Per rampe Reprap 1.4 stampante 3D Con imballaggio indipendente kit",
"and using the Repetier software I have commanded the printer",
"tried to connect, via USB, to the computer and using",
"of current, that passes through the voltage regulator, thereby heating",
"was the voltage regulator. I heard also about unplugging the",
"printer worked very well until it started giving the same",
"the whole (without connecting the screen) and tried. The printer",
"stepper motors...) and have uploaded Marlin firmware (configuring: thermistor, endstops...)",
"black wire to GND, red wire to 5V and the",
"a few tests, however, I've noticed that the Arduino was",
"I always powered the Arduino with USB and RAMPS 1.4",
"Arduino arrived, I connected the whole (without connecting the screen)",
"same problem as the first Arduino board. Someone can tell",
"correct. I always powered the Arduino with USB and RAMPS",
"it the RAMPS board that does not work properly? ###",
"the RAMPS board that does not work properly? ### EDIT:",
"fai da te](https://it.aliexpress.com/item/1PCS-High-Quality-Mechanical-Endstop-For-Reprap-ramps-1-4-3D-printer-With-independent-packing-diy/32454910275.html) and I connected the black wire to",
"the Arduino was restarting several times and at one point",
"endstops can cause this problem. I have these endstops: [1",
"commanded the printer which did do some movement. The printer",
"some movement. The printer worked perfectly. After a few tests,",
"unplugging the screen because it consumes a lot of current,",
"to GND, red wire to 5V and the green wire",
"then proceeded to buy another Arduino Mega. I also checked",
"the power supply from the two terminals. [](https://i.stack.imgur.com/PFSWR.png) When the new Arduino arrived,",
"these endstops: [1 PZ di Alta Qualità Finecorsa Meccanico Per",
"was connected to the power supply from the two terminals.",
"Meccanico Per rampe Reprap 1.4 stampante 3D Con imballaggio indipendente",
"with the RAMPS 1.4 board and Arduino Mega. I have",
"about unplugging the screen because it consumes a lot of",
"is correct. I always powered the Arduino with USB and",
"problem as the first Arduino board. Someone can tell me",
"have these endstops: [1 PZ di Alta Qualità Finecorsa Meccanico",
"that the burned component was the voltage regulator. I heard",
"the voltage of my 12V 360W power supply and it",
"very well until it started giving the same problem as",
"cause this problem. I have these endstops: [1 PZ di",
"I'm assembling a 3D printer with the RAMPS 1.4 board",
"me if I have done something wrong, or is it",
"the two terminals. [](https://i.stack.imgur.com/PFSWR.png) When the",
"have uploaded Marlin firmware (configuring: thermistor, endstops...) on the Arduino",
"on the Arduino board burning. Searching the internet I saw",
"at one point I saw a component on the Arduino",
"problem: I'm assembling a 3D printer with the RAMPS 1.4",
"kit fai da te](https://it.aliexpress.com/item/1PCS-High-Quality-Mechanical-Endstop-For-Reprap-ramps-1-4-3D-printer-With-independent-packing-diy/32454910275.html) and I connected the black wire",
"RAMPS 1.4 was connected to the power supply from the",
"until it started giving the same problem as the first",
"a 3D printer with the RAMPS 1.4 board and Arduino",
"the RAMPS 1.4 board and Arduino Mega. I have assembled",
"1.4 was connected to the power supply from the two",
"the screen because it consumes a lot of current, that",
"tried. The printer worked very well until it started giving",
"1.4 stampante 3D Con imballaggio indipendente kit fai da te](https://it.aliexpress.com/item/1PCS-High-Quality-Mechanical-Endstop-For-Reprap-ramps-1-4-3D-printer-With-independent-packing-diy/32454910275.html)",
"Mega. I have assembled the structure and the electronics (set",
"(set drivers, placed the jumpers, connected stepper motors...) and have",
"the burned component was the voltage regulator. I heard also",
"da te](https://it.aliexpress.com/item/1PCS-High-Quality-Mechanical-Endstop-For-Reprap-ramps-1-4-3D-printer-With-independent-packing-diy/32454910275.html) and I connected the black wire to GND,",
"RAMPS board that does not work properly? ### EDIT: I",
"software I have commanded the printer which did do some",
"printer worked perfectly. After a few tests, however, I've noticed",
"however, I've noticed that the Arduino was restarting several times",
"few tests, however, I've noticed that the Arduino was restarting",
"with USB and RAMPS 1.4 was connected to the power",
"connect, via USB, to the computer and using the Repetier",
"jumpers, connected stepper motors...) and have uploaded Marlin firmware (configuring:",
"current, that passes through the voltage regulator, thereby heating it",
"up. I then proceeded to buy another Arduino Mega. I",
"placed the jumpers, connected stepper motors...) and have uploaded Marlin",
"also about unplugging the screen because it consumes a lot",
"(without connecting the screen) and tried. The printer worked very",
"Arduino was restarting several times and at one point I",
"this problem. I have these endstops: [1 PZ di Alta",
"Reprap 1.4 stampante 3D Con imballaggio indipendente kit fai da",
"is it the RAMPS board that does not work properly?",
"two terminals. [](https://i.stack.imgur.com/PFSWR.png) When the new",
"Qualità Finecorsa Meccanico Per rampe Reprap 1.4 stampante 3D Con",
"to the power supply from the two terminals. [ and I connected the black",
"as the first Arduino board. Someone can tell me if",
"supply from the two terminals. [](https://i.stack.imgur.com/PFSWR.png)",
"or is it the RAMPS board that does not work",
"[1 PZ di Alta Qualità Finecorsa Meccanico Per rampe Reprap",
"assembling a 3D printer with the RAMPS 1.4 board and",
"USB and RAMPS 1.4 was connected to the power supply",
"The printer worked perfectly. After a few tests, however, I've",
"movement. The printer worked perfectly. After a few tests, however,",
"I also checked the voltage of my 12V 360W power"
] |
[
"like the one below are often practical. I for instance",
"have switched printer, and am using Simplify3D instead. All of",
"hole of a gear). I make models to sell so",
"I have switched printer, and am using Simplify3D instead. All",
"hollow. Simplify3D has a setting to join the outer solid",
"meshes when slicing with Cura. Geometry like the one below",
"when slicing with Cura. Geometry like the one below are",
"below are often practical. I for instance add lots of",
"much cared about self intersecting meshes when slicing with Cura.",
"have never much cared about self intersecting meshes when slicing",
"about self intersecting meshes when slicing with Cura. Geometry like",
"to join the outer solid shell but it also fills",
"Simplify3D has a setting to join the outer solid shell",
"a setting to join the outer solid shell but it",
"of a gear). I make models to sell so this",
"intersect with the base geometry: [](https://i.stack.imgur.com/cRZqk.png) Now I",
"setting to join the outer solid shell but it also",
"objects become hollow. Simplify3D has a setting to join the",
"sudden, I get lots of problems with these models. The",
"[](https://i.stack.imgur.com/cRZqk.png) Now I have switched printer, and am",
"mesh](https://i.stack.imgur.com/cRZqk.png)](https://i.stack.imgur.com/cRZqk.png) Now I have switched printer, and am using Simplify3D",
"so this is a big deal for me. EDIT: Also,",
"self intersecting meshes when slicing with Cura. Geometry like the",
"center hole of a gear). I make models to sell",
"the one below are often practical. I for instance add",
"using Simplify3D instead. All of a sudden, I get lots",
"self intersect with the base geometry: [](https://i.stack.imgur.com/cRZqk.png) Now",
"problems with these models. The intersection of the objects become",
"of the objects become hollow. Simplify3D has a setting to",
"the objects become hollow. Simplify3D has a setting to join",
"lots of rivets that self intersect with the base geometry:",
"of rivets that self intersect with the base geometry: [](https://i.stack.imgur.com/cRZqk.png)",
"printer, and am using Simplify3D instead. All of a sudden,",
"with the base geometry: [](https://i.stack.imgur.com/cRZqk.png) Now I have",
"The intersection of the objects become hollow. Simplify3D has a",
"me. EDIT: Also, they printed perfectly fine in formlabs \"slicer\".",
"this is a big deal for me. EDIT: Also, they",
"one below are often practical. I for instance add lots",
"with these models. The intersection of the objects become hollow.",
"often practical. I for instance add lots of rivets that",
"sell so this is a big deal for me. EDIT:",
"are often practical. I for instance add lots of rivets",
"the outer solid shell but it also fills holes (such",
"geometry: [](https://i.stack.imgur.com/cRZqk.png) Now I have switched printer, and",
"to sell so this is a big deal for me.",
"as the center hole of a gear). I make models",
"the center hole of a gear). I make models to",
"slicing with Cura. Geometry like the one below are often",
"and am using Simplify3D instead. All of a sudden, I",
"gear). I make models to sell so this is a",
"am using Simplify3D instead. All of a sudden, I get",
"but it also fills holes (such as the center hole",
"models to sell so this is a big deal for",
"instance add lots of rivets that self intersect with the",
"practical. I for instance add lots of rivets that self",
"get lots of problems with these models. The intersection of",
"Geometry like the one below are often practical. I for",
"Simplify3D instead. All of a sudden, I get lots of",
"a gear). I make models to sell so this is",
"outer solid shell but it also fills holes (such as",
"intersecting meshes when slicing with Cura. Geometry like the one",
"Now I have switched printer, and am using Simplify3D instead.",
"it also fills holes (such as the center hole of",
"I for instance add lots of rivets that self intersect",
"for instance add lots of rivets that self intersect with",
"lots of problems with these models. The intersection of the",
"I make models to sell so this is a big",
"holes (such as the center hole of a gear). I",
"become hollow. Simplify3D has a setting to join the outer",
"is a big deal for me. EDIT: Also, they printed",
"rivets that self intersect with the base geometry: [](https://i.stack.imgur.com/cRZqk.png) Now I have switched printer,",
"join the outer solid shell but it also fills holes",
"the base geometry: [](https://i.stack.imgur.com/cRZqk.png) Now I have switched",
"intersecting mesh](https://i.stack.imgur.com/cRZqk.png)](https://i.stack.imgur.com/cRZqk.png) Now I have switched printer, and am using",
"deal for me. EDIT: Also, they printed perfectly fine in",
"Cura. Geometry like the one below are often practical. I",
"intersection of the objects become hollow. Simplify3D has a setting",
"big deal for me. EDIT: Also, they printed perfectly fine",
"a big deal for me. EDIT: Also, they printed perfectly",
"of a sudden, I get lots of problems with these",
"with Cura. Geometry like the one below are often practical.",
"also fills holes (such as the center hole of a",
"make models to sell so this is a big deal",
"add lots of rivets that self intersect with the base",
"never much cared about self intersecting meshes when slicing with",
"I have never much cared about self intersecting meshes when",
"cared about self intersecting meshes when slicing with Cura. Geometry"
] |
[
"issue\")](https://i.stack.imgur.com/xh3Bi.jpg \"Print showing issue\") Update: I just printed a baymax",
"just printed a baymax that came with the SD printer.",
"of acceptable quality](https://i.stack.imgur.com/iXMhm.png \"Print of acceptable quality\")](https://i.stack.imgur.com/iXMhm.png \"Print of acceptable",
"that came with the SD printer. And it looks awesome.",
"two different pawn pieces from thingverse. I just used Cura",
"acceptable quality](https://i.stack.imgur.com/iXMhm.png \"Print of acceptable quality\")](https://i.stack.imgur.com/iXMhm.png \"Print of acceptable quality\")",
"from thingverse. I just used Cura to convert the files",
"readable for the printer. Is my problem with the pieces",
"to be readable for the printer. Is my problem with",
"the SD printer. And it looks awesome. I think the",
"the configuration from Cura. [![Print of acceptable quality](https://i.stack.imgur.com/iXMhm.png \"Print of",
"Cura. [![Print of acceptable quality](https://i.stack.imgur.com/iXMhm.png \"Print of acceptable quality\")](https://i.stack.imgur.com/iXMhm.png \"Print",
"printer itself? [![Print showing issue](https://i.stack.imgur.com/xh3Bi.jpg \"Print showing issue\")](https://i.stack.imgur.com/xh3Bi.jpg \"Print showing",
"[![Print of acceptable quality](https://i.stack.imgur.com/iXMhm.png \"Print of acceptable quality\")](https://i.stack.imgur.com/iXMhm.png \"Print of",
"issue\") Update: I just printed a baymax that came with",
"itself? [![Print showing issue](https://i.stack.imgur.com/xh3Bi.jpg \"Print showing issue\")](https://i.stack.imgur.com/xh3Bi.jpg \"Print showing issue\")",
"the problem is with the configuration from Cura. [![Print of",
"different pawn pieces from thingverse. I just used Cura to",
"from the Cura software? or with my printer itself? [![Print",
"came with the SD printer. And it looks awesome. I",
"the Cura software? or with my printer itself? [![Print showing",
"think the problem is with the configuration from Cura. [![Print",
"3D printer, I just print two different pawn pieces from",
"it looks awesome. I think the problem is with the",
"configuration from the Cura software? or with my printer itself?",
"I'm new with my 3D printer, I just print two",
"\"Print showing issue\")](https://i.stack.imgur.com/xh3Bi.jpg \"Print showing issue\") Update: I just printed",
"pieces from thingverse. I just used Cura to convert the",
"printer. And it looks awesome. I think the problem is",
"used Cura to convert the files to be readable for",
"with my printer itself? [![Print showing issue](https://i.stack.imgur.com/xh3Bi.jpg \"Print showing issue\")](https://i.stack.imgur.com/xh3Bi.jpg",
"problem with the pieces has to do with the configuration",
"printer, I just print two different pawn pieces from thingverse.",
"thingverse. I just used Cura to convert the files to",
"configuration from Cura. [![Print of acceptable quality](https://i.stack.imgur.com/iXMhm.png \"Print of acceptable",
"for the printer. Is my problem with the pieces has",
"[![Print showing issue](https://i.stack.imgur.com/xh3Bi.jpg \"Print showing issue\")](https://i.stack.imgur.com/xh3Bi.jpg \"Print showing issue\") Update:",
"just print two different pawn pieces from thingverse. I just",
"convert the files to be readable for the printer. Is",
"Is my problem with the pieces has to do with",
"Cura software? or with my printer itself? [![Print showing issue](https://i.stack.imgur.com/xh3Bi.jpg",
"And it looks awesome. I think the problem is with",
"with the SD printer. And it looks awesome. I think",
"baymax that came with the SD printer. And it looks",
"SD printer. And it looks awesome. I think the problem",
"showing issue\") Update: I just printed a baymax that came",
"I just used Cura to convert the files to be",
"Cura to convert the files to be readable for the",
"showing issue\")](https://i.stack.imgur.com/xh3Bi.jpg \"Print showing issue\") Update: I just printed a",
"showing issue](https://i.stack.imgur.com/xh3Bi.jpg \"Print showing issue\")](https://i.stack.imgur.com/xh3Bi.jpg \"Print showing issue\") Update: I",
"the configuration from the Cura software? or with my printer",
"has to do with the configuration from the Cura software?",
"with the configuration from the Cura software? or with my",
"the files to be readable for the printer. Is my",
"looks awesome. I think the problem is with the configuration",
"my printer itself? [![Print showing issue](https://i.stack.imgur.com/xh3Bi.jpg \"Print showing issue\")](https://i.stack.imgur.com/xh3Bi.jpg \"Print",
"I just printed a baymax that came with the SD",
"from Cura. [![Print of acceptable quality](https://i.stack.imgur.com/iXMhm.png \"Print of acceptable quality\")](https://i.stack.imgur.com/iXMhm.png",
"just used Cura to convert the files to be readable",
"with the configuration from Cura. [![Print of acceptable quality](https://i.stack.imgur.com/iXMhm.png \"Print",
"files to be readable for the printer. Is my problem",
"to do with the configuration from the Cura software? or",
"awesome. I think the problem is with the configuration from",
"printer. Is my problem with the pieces has to do",
"my 3D printer, I just print two different pawn pieces",
"Update: I just printed a baymax that came with the",
"I just print two different pawn pieces from thingverse. I",
"software? or with my printer itself? [![Print showing issue](https://i.stack.imgur.com/xh3Bi.jpg \"Print",
"the pieces has to do with the configuration from the",
"do with the configuration from the Cura software? or with",
"my problem with the pieces has to do with the",
"be readable for the printer. Is my problem with the",
"is with the configuration from Cura. [![Print of acceptable quality](https://i.stack.imgur.com/iXMhm.png",
"or with my printer itself? [![Print showing issue](https://i.stack.imgur.com/xh3Bi.jpg \"Print showing",
"to convert the files to be readable for the printer.",
"with my 3D printer, I just print two different pawn",
"I think the problem is with the configuration from Cura.",
"issue](https://i.stack.imgur.com/xh3Bi.jpg \"Print showing issue\")](https://i.stack.imgur.com/xh3Bi.jpg \"Print showing issue\") Update: I just",
"problem is with the configuration from Cura. [![Print of acceptable",
"printed a baymax that came with the SD printer. And",
"with the pieces has to do with the configuration from",
"pawn pieces from thingverse. I just used Cura to convert",
"print two different pawn pieces from thingverse. I just used",
"pieces has to do with the configuration from the Cura",
"the printer. Is my problem with the pieces has to",
"a baymax that came with the SD printer. And it",
"new with my 3D printer, I just print two different",
"\"Print showing issue\") Update: I just printed a baymax that"
] |
[
"a way to prevent bend on print with M3D printer?",
"Hello is there a way to prevent bend on print",
"there a way to prevent bend on print with M3D",
"way to prevent bend on print with M3D printer? [](https://i.stack.imgur.com/j2IRe.jpg)",
"to prevent bend on print with M3D printer? [![enter image"
] |
[
"a problem with the z-axis of my printer. To resolve",
"issue with the Z axis not moving I remove the",
"rod. Am I able to use the printer with just",
"with the Z axis not moving I remove the left",
"had a problem with the z-axis of my printer. To",
"moving I remove the left polished rod. Am I able",
"printer. To resolve the issue with the Z axis not",
"the left polished rod. Am I able to use the",
"the z-axis of my printer. To resolve the issue with",
"the issue with the Z axis not moving I remove",
"I able to use the printer with just one smooth",
"remove the left polished rod. Am I able to use",
"I remove the left polished rod. Am I able to",
"of my printer. To resolve the issue with the Z",
"axis not moving I remove the left polished rod. Am",
"the Z axis not moving I remove the left polished",
"problem with the z-axis of my printer. To resolve the",
"resolve the issue with the Z axis not moving I",
"polished rod. Am I able to use the printer with",
"recently had a problem with the z-axis of my printer.",
"z-axis of my printer. To resolve the issue with the",
"I recently had a problem with the z-axis of my",
"with the z-axis of my printer. To resolve the issue",
"Am I able to use the printer with just one",
"Z axis not moving I remove the left polished rod.",
"left polished rod. Am I able to use the printer",
"able to use the printer with just one smooth rod?",
"To resolve the issue with the Z axis not moving",
"not moving I remove the left polished rod. Am I",
"my printer. To resolve the issue with the Z axis"
] |
[
"this [question](https://3dprinting.stackexchange.com/questions/904/teflon-tubing-in-nozzle-throat-coming-out). It seems only a small amount of excess",
"me worry that with this particular part, I won't achieve",
"apply some pressure at the cold end - a nut",
"force out the inner tube. This makes me worry that",
"to prevent the teflon tube from rising up, so I",
"sub-standard throat part (in a pack of 6). However, I",
"excess pressure in the extruder is enough to force out",
"as designed, so if I go back to PLA filament,",
"I was wondering about the advisability of using a retainer",
"wondering about the advisability of using a retainer to apply",
"can use this part and retain some resilience against excess",
"[question](https://3dprinting.stackexchange.com/questions/904/teflon-tubing-in-nozzle-throat-coming-out). It seems only a small amount of excess pressure",
"makes me worry that with this particular part, I won't",
"I had a slightly sub-standard throat part (in a pack",
"a nut with a washer soldered on maybe. My goal",
"soft to function as designed, so if I go back",
"PTFE tube, but encountered the problem described in this [question](https://3dprinting.stackexchange.com/questions/904/teflon-tubing-in-nozzle-throat-coming-out).",
"PTFE liner seems worth exploring). I was wondering about the",
"I go back to PLA filament, maybe it is more",
"in this [question](https://3dprinting.stackexchange.com/questions/904/teflon-tubing-in-nozzle-throat-coming-out). It seems only a small amount of",
"use this part and retain some resilience against excess extrusion",
"was caused by too high a temperature (this is ABS",
"to PLA filament, maybe it is more likely to work",
"the inner tube. This makes me worry that with this",
"original plain steel throat, so a PTFE liner seems worth",
"is enough to force out the inner tube. This makes",
"to function as designed, so if I go back to",
"- a nut with a washer soldered on maybe. My",
"end - a nut with a washer soldered on maybe.",
"about the advisability of using a retainer to apply some",
"a throat with a PTFE tube, but encountered the problem",
"problem described in this [question](https://3dprinting.stackexchange.com/questions/904/teflon-tubing-in-nozzle-throat-coming-out). It seems only a small",
"washer soldered on maybe. My goal is to prevent the",
"I now wonder if the problem was caused by too",
"too soft to function as designed, so if I go",
"worth exploring). I was wondering about the advisability of using",
"retain some resilience against excess extrusion pressure. I was assuming",
"reliable configuration (and I'm experiencing some binding with the original",
"problem was caused by too high a temperature (this is",
"(and I'm experiencing some binding with the original plain steel",
"of using a retainer to apply some pressure at the",
"6). However, I now wonder if the problem was caused",
"go back to PLA filament, maybe it is more likely",
"so a PTFE liner seems worth exploring). I was wondering",
"pressure in the extruder is enough to force out the",
"maybe. My goal is to prevent the teflon tube from",
"nut with a washer soldered on maybe. My goal is",
"so I can use this part and retain some resilience",
"the problem was caused by too high a temperature (this",
"so if I go back to PLA filament, maybe it",
"on maybe. My goal is to prevent the teflon tube",
"teflon tube from rising up, so I can use this",
"tried using a throat with a PTFE tube, but encountered",
"some binding with the original plain steel throat, so a",
"and retain some resilience against excess extrusion pressure. I was",
"too high a temperature (this is ABS filament) and maybe",
"(this is ABS filament) and maybe the teflon will be",
"using a retainer to apply some pressure at the cold",
"had a slightly sub-standard throat part (in a pack of",
"a reliable configuration (and I'm experiencing some binding with the",
"ABS filament) and maybe the teflon will be too soft",
"soldered on maybe. My goal is to prevent the teflon",
"the advisability of using a retainer to apply some pressure",
"tube. This makes me worry that with this particular part,",
"this part and retain some resilience against excess extrusion pressure.",
"throat with a PTFE tube, but encountered the problem described",
"out the inner tube. This makes me worry that with",
"designed, so if I go back to PLA filament, maybe",
"advisability of using a retainer to apply some pressure at",
"throat, so a PTFE liner seems worth exploring). I was",
"was assuming I had a slightly sub-standard throat part (in",
"a washer soldered on maybe. My goal is to prevent",
"function as designed, so if I go back to PLA",
"if I go back to PLA filament, maybe it is",
"I was assuming I had a slightly sub-standard throat part",
"seems only a small amount of excess pressure in the",
"wonder if the problem was caused by too high a",
"slightly sub-standard throat part (in a pack of 6). However,",
"I won't achieve a reliable configuration (and I'm experiencing some",
"tube from rising up, so I can use this part",
"tube, but encountered the problem described in this [question](https://3dprinting.stackexchange.com/questions/904/teflon-tubing-in-nozzle-throat-coming-out). It",
"steel throat, so a PTFE liner seems worth exploring). I",
"configuration (and I'm experiencing some binding with the original plain",
"of excess pressure in the extruder is enough to force",
"part (in a pack of 6). However, I now wonder",
"achieve a reliable configuration (and I'm experiencing some binding with",
"resilience against excess extrusion pressure. I was assuming I had",
"I've tried using a throat with a PTFE tube, but",
"is ABS filament) and maybe the teflon will be too",
"with a PTFE tube, but encountered the problem described in",
"encountered the problem described in this [question](https://3dprinting.stackexchange.com/questions/904/teflon-tubing-in-nozzle-throat-coming-out). It seems only",
"plain steel throat, so a PTFE liner seems worth exploring).",
"some resilience against excess extrusion pressure. I was assuming I",
"maybe it is more likely to work without modification. ",
"a small amount of excess pressure in the extruder is",
"enough to force out the inner tube. This makes me",
"experiencing some binding with the original plain steel throat, so",
"from rising up, so I can use this part and",
"However, I now wonder if the problem was caused by",
"the teflon tube from rising up, so I can use",
"this particular part, I won't achieve a reliable configuration (and",
"(in a pack of 6). However, I now wonder if",
"filament) and maybe the teflon will be too soft to",
"the cold end - a nut with a washer soldered",
"cold end - a nut with a washer soldered on",
"pressure at the cold end - a nut with a",
"was wondering about the advisability of using a retainer to",
"temperature (this is ABS filament) and maybe the teflon will",
"at the cold end - a nut with a washer",
"retainer to apply some pressure at the cold end -",
"the extruder is enough to force out the inner tube.",
"worry that with this particular part, I won't achieve a",
"if the problem was caused by too high a temperature",
"with the original plain steel throat, so a PTFE liner",
"prevent the teflon tube from rising up, so I can",
"up, so I can use this part and retain some",
"particular part, I won't achieve a reliable configuration (and I'm",
"a retainer to apply some pressure at the cold end",
"excess extrusion pressure. I was assuming I had a slightly",
"seems worth exploring). I was wondering about the advisability of",
"that with this particular part, I won't achieve a reliable",
"assuming I had a slightly sub-standard throat part (in a",
"I'm experiencing some binding with the original plain steel throat,",
"This makes me worry that with this particular part, I",
"is to prevent the teflon tube from rising up, so",
"it is more likely to work without modification.  [](https://i.stack.imgur.com/Zj61nm.jpg)",
"small amount of excess pressure in the extruder is enough",
"extruder is enough to force out the inner tube. This",
"a PTFE liner seems worth exploring). I was wondering about",
"My goal is to prevent the teflon tube from rising",
"a pack of 6). However, I now wonder if the",
"to apply some pressure at the cold end - a",
"with this particular part, I won't achieve a reliable configuration",
"only a small amount of excess pressure in the extruder",
"I can use this part and retain some resilience against",
"part, I won't achieve a reliable configuration (and I'm experiencing",
"described in this [question](https://3dprinting.stackexchange.com/questions/904/teflon-tubing-in-nozzle-throat-coming-out). It seems only a small amount",
"pack of 6). However, I now wonder if the problem",
"caused by too high a temperature (this is ABS filament)",
"now wonder if the problem was caused by too high",
"to force out the inner tube. This makes me worry",
"a PTFE tube, but encountered the problem described in this",
"by too high a temperature (this is ABS filament) and",
"a temperature (this is ABS filament) and maybe the teflon",
"throat part (in a pack of 6). However, I now",
"against excess extrusion pressure. I was assuming I had a",
"part and retain some resilience against excess extrusion pressure. I",
"teflon will be too soft to function as designed, so",
"inner tube. This makes me worry that with this particular",
"pressure. I was assuming I had a slightly sub-standard throat",
"goal is to prevent the teflon tube from rising up,",
"exploring). I was wondering about the advisability of using a",
"the original plain steel throat, so a PTFE liner seems",
"but encountered the problem described in this [question](https://3dprinting.stackexchange.com/questions/904/teflon-tubing-in-nozzle-throat-coming-out). It seems",
"maybe the teflon will be too soft to function as",
"some pressure at the cold end - a nut with",
"will be too soft to function as designed, so if",
"amount of excess pressure in the extruder is enough to",
"won't achieve a reliable configuration (and I'm experiencing some binding",
"extrusion pressure. I was assuming I had a slightly sub-standard",
"PLA filament, maybe it is more likely to work without",
"be too soft to function as designed, so if I",
"a slightly sub-standard throat part (in a pack of 6).",
"in the extruder is enough to force out the inner",
"the teflon will be too soft to function as designed,",
"rising up, so I can use this part and retain",
"It seems only a small amount of excess pressure in",
"using a throat with a PTFE tube, but encountered the",
"filament, maybe it is more likely to work without modification.",
"binding with the original plain steel throat, so a PTFE",
"with a washer soldered on maybe. My goal is to",
"of 6). However, I now wonder if the problem was",
"high a temperature (this is ABS filament) and maybe the",
"the problem described in this [question](https://3dprinting.stackexchange.com/questions/904/teflon-tubing-in-nozzle-throat-coming-out). It seems only a",
"and maybe the teflon will be too soft to function",
"back to PLA filament, maybe it is more likely to",
"liner seems worth exploring). I was wondering about the advisability"
] |
[
"else (no technical drawing, no CAD files). Does anybody knows",
"files). Does anybody knows a free tool, that allows me",
"selected vertices, * measure distances between a selected vertex and",
"technical drawing, no CAD files). Does anybody knows a free",
"3 selected vertices? I very much like the way Blender",
"distances between 2 selected vertices, * measure distances between a",
"radio of a circle defined by 3 selected vertices? I",
"for a 3D printer using OpenSCAD. Having some STL files",
"circle defined by 3 selected vertices? I very much like",
"create parts for a 3D printer using OpenSCAD. Having some",
"and a plane defined by 3 vertices, * measure the",
"vertices? I very much like the way Blender allows to",
"measure distances between 2 selected vertices, * measure distances between",
"to work with meshes, especially select vertices or planes, but",
"vertices, * measure distances between a selected vertex and a",
"that allows me to * measure distances between 2 selected",
"tool, that allows me to * measure distances between 2",
"vertices, * measure the radio of a circle defined by",
"vertices or planes, but unfortunately haven't found a way to",
"Blender allows to work with meshes, especially select vertices or",
"to create parts for a 3D printer using OpenSCAD. Having",
"planes, but unfortunately haven't found a way to measure with",
"a circle defined by 3 selected vertices? I very much",
"Having some STL files from the vendor, but nothing else",
"plane defined by 3 vertices, * measure the radio of",
"from the vendor, but nothing else (no technical drawing, no",
"by 3 selected vertices? I very much like the way",
"measure the radio of a circle defined by 3 selected",
"3D printer using OpenSCAD. Having some STL files from the",
"meshes, especially select vertices or planes, but unfortunately haven't found",
"selected vertices? I very much like the way Blender allows",
"Does anybody knows a free tool, that allows me to",
"* measure distances between 2 selected vertices, * measure distances",
"a 3D printer using OpenSCAD. Having some STL files from",
"free tool, that allows me to * measure distances between",
"some STL files from the vendor, but nothing else (no",
"want to create parts for a 3D printer using OpenSCAD.",
"allows to work with meshes, especially select vertices or planes,",
"defined by 3 selected vertices? I very much like the",
"to * measure distances between 2 selected vertices, * measure",
"STL files from the vendor, but nothing else (no technical",
"a plane defined by 3 vertices, * measure the radio",
"very much like the way Blender allows to work with",
"way Blender allows to work with meshes, especially select vertices",
"work with meshes, especially select vertices or planes, but unfortunately",
"selected vertex and a plane defined by 3 vertices, *",
"CAD files). Does anybody knows a free tool, that allows",
"but unfortunately haven't found a way to measure with Blender.",
"but nothing else (no technical drawing, no CAD files). Does",
"especially select vertices or planes, but unfortunately haven't found a",
"with meshes, especially select vertices or planes, but unfortunately haven't",
"I want to create parts for a 3D printer using",
"knows a free tool, that allows me to * measure",
"between 2 selected vertices, * measure distances between a selected",
"a selected vertex and a plane defined by 3 vertices,",
"like the way Blender allows to work with meshes, especially",
"the way Blender allows to work with meshes, especially select",
"by 3 vertices, * measure the radio of a circle",
"much like the way Blender allows to work with meshes,",
"(no technical drawing, no CAD files). Does anybody knows a",
"anybody knows a free tool, that allows me to *",
"defined by 3 vertices, * measure the radio of a",
"a free tool, that allows me to * measure distances",
"distances between a selected vertex and a plane defined by",
"me to * measure distances between 2 selected vertices, *",
"no CAD files). Does anybody knows a free tool, that",
"2 selected vertices, * measure distances between a selected vertex",
"* measure the radio of a circle defined by 3",
"the radio of a circle defined by 3 selected vertices?",
"nothing else (no technical drawing, no CAD files). Does anybody",
"vertex and a plane defined by 3 vertices, * measure",
"or planes, but unfortunately haven't found a way to measure",
"I very much like the way Blender allows to work",
"of a circle defined by 3 selected vertices? I very",
"3 vertices, * measure the radio of a circle defined",
"* measure distances between a selected vertex and a plane",
"files from the vendor, but nothing else (no technical drawing,",
"vendor, but nothing else (no technical drawing, no CAD files).",
"OpenSCAD. Having some STL files from the vendor, but nothing",
"drawing, no CAD files). Does anybody knows a free tool,",
"the vendor, but nothing else (no technical drawing, no CAD",
"select vertices or planes, but unfortunately haven't found a way",
"using OpenSCAD. Having some STL files from the vendor, but",
"parts for a 3D printer using OpenSCAD. Having some STL",
"between a selected vertex and a plane defined by 3",
"allows me to * measure distances between 2 selected vertices,",
"measure distances between a selected vertex and a plane defined",
"printer using OpenSCAD. Having some STL files from the vendor,"
] |
[
"be reduced to fix it? Layer Height = .3 ```",
"using Simplify3D. [](https://i.stack.imgur.com/SsiMS.jpg) [](https://i.stack.imgur.com/1tTZ5.jpg)",
"= 1 Extrusion Width = .45 <-- I feel like",
"``` Nozzle diameter = .4 Extrusion multiplier = 1 Extrusion",
"Width = .45 <-- I feel like this could be",
"diameter = .4 Extrusion multiplier = 1 Extrusion Width =",
"I'm using Simplify3D. [](https://i.stack.imgur.com/SsiMS.jpg) [](https://i.stack.imgur.com/SsiMS.jpg) [](https://i.stack.imgur.com/SsiMS.jpg) [](https://i.stack.imgur.com/SsiMS.jpg)",
"Nozzle diameter = .4 Extrusion multiplier = 1 Extrusion Width",
"<-- I feel like this could be reduced to fix",
"feel like this could be reduced to fix it? Layer"
] |
[
"card, and even borrowed one from another working replicator, and",
"% completed does not) Does anyone have any idea as",
"can cancel the print during the freeze. I've made sure",
"one from another working replicator, and the freeze still occurs.",
"any idea as to what could be causing the problem?",
"freezes randomly on the first layer. In general, it looks",
"and even borrowed one from another working replicator, and the",
"occurs. Likewise, I've regenerated the x3g file, and that did",
"is off. It tends freezes randomly on the first layer.",
"am running out of ways to troubleshoot. After restarting, I",
"\"in progress\" but not making progress (Timer ticks up, %",
"not freeze, I can cancel the print during the freeze.",
"During the print, the printer just stops executing and I",
"cancel the print during the freeze. I've made sure Z",
"the print during the freeze. I've made sure Z pause",
"x3g file, and that did not work. The panel does",
"I am running a MakerBot Replicator 2. During the print,",
"another working replicator, and the freeze still occurs. Likewise, I've",
"ticks up, % completed does not) Does anyone have any",
"did not work. The panel does not freeze, I can",
"2. During the print, the printer just stops executing and",
"After restarting, I can load and extrude filament. I have",
"regenerated the x3g file, and that did not work. The",
"load and extrude filament. I have replaced the SD card,",
"does not freeze, I can cancel the print during the",
"the SD card, and even borrowed one from another working",
"progress\" but not making progress (Timer ticks up, % completed",
"executing and I am running out of ways to troubleshoot.",
"I can cancel the print during the freeze. I've made",
"the print is \"in progress\" but not making progress (Timer",
"Likewise, I've regenerated the x3g file, and that did not",
"still occurs. Likewise, I've regenerated the x3g file, and that",
"layer. In general, it looks as though the print is",
"a MakerBot Replicator 2. During the print, the printer just",
"the freeze still occurs. Likewise, I've regenerated the x3g file,",
"to troubleshoot. After restarting, I can load and extrude filament.",
"file, and that did not work. The panel does not",
"freeze, I can cancel the print during the freeze. I've",
"completed does not) Does anyone have any idea as to",
"from another working replicator, and the freeze still occurs. Likewise,",
"restarting, I can load and extrude filament. I have replaced",
"anyone have any idea as to what could be causing",
"troubleshoot. After restarting, I can load and extrude filament. I",
"the first layer. In general, it looks as though the",
"during the freeze. I've made sure Z pause is off.",
"SD card, and even borrowed one from another working replicator,",
"the freeze. I've made sure Z pause is off. It",
"Z pause is off. It tends freezes randomly on the",
"print, the printer just stops executing and I am running",
"(Timer ticks up, % completed does not) Does anyone have",
"and that did not work. The panel does not freeze,",
"The panel does not freeze, I can cancel the print",
"extrude filament. I have replaced the SD card, and even",
"pause is off. It tends freezes randomly on the first",
"up, % completed does not) Does anyone have any idea",
"Does anyone have any idea as to what could be",
"can load and extrude filament. I have replaced the SD",
"It tends freezes randomly on the first layer. In general,",
"is \"in progress\" but not making progress (Timer ticks up,",
"and I am running out of ways to troubleshoot. After",
"replicator, and the freeze still occurs. Likewise, I've regenerated the",
"sure Z pause is off. It tends freezes randomly on",
"filament. I have replaced the SD card, and even borrowed",
"of ways to troubleshoot. After restarting, I can load and",
"printer just stops executing and I am running out of",
"stops executing and I am running out of ways to",
"out of ways to troubleshoot. After restarting, I can load",
"tends freezes randomly on the first layer. In general, it",
"freeze still occurs. Likewise, I've regenerated the x3g file, and",
"am running a MakerBot Replicator 2. During the print, the",
"not) Does anyone have any idea as to what could",
"making progress (Timer ticks up, % completed does not) Does",
"I am running out of ways to troubleshoot. After restarting,",
"not work. The panel does not freeze, I can cancel",
"first layer. In general, it looks as though the print",
"it looks as though the print is \"in progress\" but",
"does not) Does anyone have any idea as to what",
"Replicator 2. During the print, the printer just stops executing",
"even borrowed one from another working replicator, and the freeze",
"MakerBot Replicator 2. During the print, the printer just stops",
"on the first layer. In general, it looks as though",
"have replaced the SD card, and even borrowed one from",
"the x3g file, and that did not work. The panel",
"general, it looks as though the print is \"in progress\"",
"borrowed one from another working replicator, and the freeze still",
"randomly on the first layer. In general, it looks as",
"not making progress (Timer ticks up, % completed does not)",
"the printer just stops executing and I am running out",
"looks as though the print is \"in progress\" but not",
"though the print is \"in progress\" but not making progress",
"made sure Z pause is off. It tends freezes randomly",
"that did not work. The panel does not freeze, I",
"panel does not freeze, I can cancel the print during",
"I've made sure Z pause is off. It tends freezes",
"working replicator, and the freeze still occurs. Likewise, I've regenerated",
"have any idea as to what could be causing the",
"replaced the SD card, and even borrowed one from another",
"In general, it looks as though the print is \"in",
"I've regenerated the x3g file, and that did not work.",
"the print, the printer just stops executing and I am",
"and extrude filament. I have replaced the SD card, and",
"as though the print is \"in progress\" but not making",
"just stops executing and I am running out of ways",
"running a MakerBot Replicator 2. During the print, the printer",
"off. It tends freezes randomly on the first layer. In",
"progress (Timer ticks up, % completed does not) Does anyone",
"I can load and extrude filament. I have replaced the",
"freeze. I've made sure Z pause is off. It tends",
"and the freeze still occurs. Likewise, I've regenerated the x3g",
"ways to troubleshoot. After restarting, I can load and extrude",
"but not making progress (Timer ticks up, % completed does",
"print is \"in progress\" but not making progress (Timer ticks",
"print during the freeze. I've made sure Z pause is",
"running out of ways to troubleshoot. After restarting, I can",
"work. The panel does not freeze, I can cancel the",
"I have replaced the SD card, and even borrowed one"
] |
[
"here](https://i.stack.imgur.com/hGIJk.jpg)](https://i.stack.imgur.com/hGIJk.jpg) These \"skips\" can start in the middle of a",
"limited understanding of gcode, it doesn't seem like this should",
"understanding of gcode, it doesn't seem like this should happen.",
"a layer across the model. [](https://i.stack.imgur.com/hGIJk.jpg) These",
"back and fills them in before starting the next layer",
"print, the unit appears to perform operations \"out of order\"",
"start in the middle of a line. It always comes",
"to perform operations \"out of order\" occasionally. Here's a picture",
"[](https://i.stack.imgur.com/hGIJk.jpg) These \"skips\" can start in the",
"more or less accurately. But from my very limited understanding",
"line. It always comes back and fills them in before",
"head jogs very slightly as it runs a line across.",
"line across. This was sliced with Cura - I'm going",
"fills them in before starting the next layer - more",
"middle of a line. It always comes back and fills",
"next layer - more or less accurately. But from my",
"gcode, it doesn't seem like this should happen. When watching",
"or less accurately. But from my very limited understanding of",
"always comes back and fills them in before starting the",
"But from my very limited understanding of gcode, it doesn't",
"small glitches, where the head jogs very slightly as it",
"see small glitches, where the head jogs very slightly as",
"accurately. But from my very limited understanding of gcode, it",
"the head jogs very slightly as it runs a line",
"my very limited understanding of gcode, it doesn't seem like",
"very limited understanding of gcode, it doesn't seem like this",
"sliced with Cura - I'm going to try a different",
"- more or less accurately. But from my very limited",
"the model. [](https://i.stack.imgur.com/hGIJk.jpg) These \"skips\" can start",
"small print, the unit appears to perform operations \"out of",
"a line. It always comes back and fills them in",
"with my new build. Late in a small print, the",
"them in before starting the next layer - more or",
"model. [](https://i.stack.imgur.com/hGIJk.jpg) These \"skips\" can start in",
"\"out of order\" occasionally. Here's a picture where it's running",
"occasionally see small glitches, where the head jogs very slightly",
"the next layer - more or less accurately. But from",
"very slightly as it runs a line across. This was",
"and fills them in before starting the next layer -",
"happen. When watching the print closely, I'll occasionally see small",
"unit appears to perform operations \"out of order\" occasionally. Here's",
"When watching the print closely, I'll occasionally see small glitches,",
"watching the print closely, I'll occasionally see small glitches, where",
"with Cura - I'm going to try a different slicer",
"layer - more or less accurately. But from my very",
"occasionally. Here's a picture where it's running a layer across",
"in the middle of a line. It always comes back",
"thing I'm seeing with my new build. Late in a",
"- I'm going to try a different slicer and see",
"from my very limited understanding of gcode, it doesn't seem",
"across. This was sliced with Cura - I'm going to",
"was sliced with Cura - I'm going to try a",
"layer across the model. [](https://i.stack.imgur.com/hGIJk.jpg) These \"skips\"",
"a picture where it's running a layer across the model.",
"across the model. [](https://i.stack.imgur.com/hGIJk.jpg) These \"skips\" can",
"\"skips\" can start in the middle of a line. It",
"going to try a different slicer and see if I",
"to try a different slicer and see if I get",
"image description here](https://i.stack.imgur.com/hGIJk.jpg)](https://i.stack.imgur.com/hGIJk.jpg) These \"skips\" can start in the middle",
"I'm seeing with my new build. Late in a small",
"print closely, I'll occasionally see small glitches, where the head",
"should happen. When watching the print closely, I'll occasionally see",
"seem like this should happen. When watching the print closely,",
"a different slicer and see if I get anything similar.",
"starting the next layer - more or less accurately. But",
"order\" occasionally. Here's a picture where it's running a layer",
"This was sliced with Cura - I'm going to try",
"it runs a line across. This was sliced with Cura",
"new build. Late in a small print, the unit appears",
"closely, I'll occasionally see small glitches, where the head jogs",
"less accurately. But from my very limited understanding of gcode,",
"slightly as it runs a line across. This was sliced",
"seeing with my new build. Late in a small print,",
"different slicer and see if I get anything similar. Thanks!",
"can start in the middle of a line. It always",
"Late in a small print, the unit appears to perform",
"this should happen. When watching the print closely, I'll occasionally",
"perform operations \"out of order\" occasionally. Here's a picture where",
"I'll occasionally see small glitches, where the head jogs very",
"runs a line across. This was sliced with Cura -",
"where the head jogs very slightly as it runs a",
"Here's a picture where it's running a layer across the",
"It always comes back and fills them in before starting",
"glitches, where the head jogs very slightly as it runs",
"before starting the next layer - more or less accurately.",
"the print closely, I'll occasionally see small glitches, where the",
"like this should happen. When watching the print closely, I'll",
"my new build. Late in a small print, the unit",
"in a small print, the unit appears to perform operations",
"appears to perform operations \"out of order\" occasionally. Here's a",
"description here](https://i.stack.imgur.com/hGIJk.jpg)](https://i.stack.imgur.com/hGIJk.jpg) These \"skips\" can start in the middle of",
"it doesn't seem like this should happen. When watching the",
"of gcode, it doesn't seem like this should happen. When",
"jogs very slightly as it runs a line across. This",
"a line across. This was sliced with Cura - I'm",
"of order\" occasionally. Here's a picture where it's running a",
"doesn't seem like this should happen. When watching the print",
"comes back and fills them in before starting the next",
"These \"skips\" can start in the middle of a line.",
"the unit appears to perform operations \"out of order\" occasionally.",
"in before starting the next layer - more or less",
"build. Late in a small print, the unit appears to",
"Another thing I'm seeing with my new build. Late in",
"of a line. It always comes back and fills them",
"I'm going to try a different slicer and see if",
"as it runs a line across. This was sliced with",
"try a different slicer and see if I get anything",
"a small print, the unit appears to perform operations \"out",
"the middle of a line. It always comes back and",
"it's running a layer across the model. [](https://i.stack.imgur.com/hGIJk.jpg)",
"where it's running a layer across the model. [![enter image",
"Cura - I'm going to try a different slicer and",
"operations \"out of order\" occasionally. Here's a picture where it's"
] |
[
"everything is screwed up. I've tried leveling the bed over",
"at best several layers after that are messed up if",
"put the SD card into my 3d printer and printed",
"resistance as I push and pull the paper under the",
"[](https://i.stack.imgur.com/e7mcL.jpg) I'm using a Monoprice 15365. I",
"changes. I'm trying to print something a wireframe cube that",
"which I imported into Cura 2.3.1. Then I used Cura",
"to print the same model and the first layer refuses",
"bed so that I feel a bit of resistance as",
"tried increasing the preheat on the printhead and on the",
"Any advice is welcome. I don't know if the problems",
"or too cold or if the printhead is too hot",
"the bed over and over again. (I use a sheet",
"I've tried increasing the preheat on the printhead and on",
"image description here](https://i.stack.imgur.com/e7mcL.jpg)](https://i.stack.imgur.com/e7mcL.jpg) I'm using a Monoprice 15365. I created",
"the problems I'm having are because the bed is too",
"a brim to help adhesion. This is what my model",
"(across the y axis) the horizontal line doesn't adhere and",
"0.5 to give it time to adhere, but no changes.",
"with the print head and everything is screwed up. I've",
"it has a print temp of 205-225. I've tried printing",
"the bed is too low or too high or too",
"the bed and printhead. I adjust the bed so that",
"the bed so that I feel a bit of resistance",
"a wireframe cube that is at the extent of my",
"level the bed, this is what the first layer tends",
"refuses to adhere, which means at best several layers after",
"tries to vertical line (across the y axis) the horizontal",
"attempts to level the bed, this is what the first",
"the first layer refuses to adhere, which means at best",
"line doesn't adhere and gets dragged along with the print",
"good one yesterday, here is what the first two lines",
"partial cube model](https://i.stack.imgur.com/AkcFA.png)](https://i.stack.imgur.com/AkcFA.png) When I printed a good one yesterday,",
"print temp of 205-225. I've tried printing at 205, 210,",
"trying to print something a wireframe cube that is at",
"on the bed. I'm using black PLA 1.75mm that says",
"65, and 70. I've tried setting the print speed multiplier",
"so I might be missing something obvious. If so, please",
"tends to look like: [](https://i.stack.imgur.com/e7mcL.jpg) I'm using",
"try to slip it between the bed and printhead. I",
"STL, which I imported into Cura 2.3.1. Then I used",
"tried setting the print speed multiplier to 0.5 to give",
"manages to recover, but usually it just means I have",
"205, 210, 215, 220, and 225. I've tried a bed",
"a gcode file to an SD card. I put the",
"a bed temp of 50, 55, 60, 65, and 70.",
"is screwed up. I've tried leveling the bed over and",
"is welcome. I don't know if the problems I'm having",
"will print one horizontal line (across the x axis), then",
"I've tried setting the print speed multiplier to 0.5 to",
"the bed. I'm using black PLA 1.75mm that says it",
"to level the bed, this is what the first layer",
"push and pull the paper under the printhead.) I've tried",
"at the extent of my printable size, so I don't",
"the same model and the first layer refuses to adhere,",
"usually it just means I have to cancel and start",
"printing at 205, 210, 215, 220, and 225. I've tried",
"printer and printed from there. Any advice is welcome. I",
"means I have to cancel and start again. It will",
"same model and the first layer refuses to adhere, which",
"[](https://i.stack.imgur.com/ET1Is.jpg) When I print today, even after multiple",
"and try to slip it between the bed and printhead.",
"x axis), then when it tries to vertical line (across",
"when it tries to vertical line (across the y axis)",
"printhead is too hot or too cold... nothing I've tried",
"advice is welcome. I don't know if the problems I'm",
"slip it between the bed and printhead. I adjust the",
"one horizontal line (across the x axis), then when it",
"looks like: [](https://i.stack.imgur.com/AkcFA.png) When I printed",
"pull the paper under the printhead.) I've tried increasing the",
"printhead and on the bed. I'm using black PLA 1.75mm",
"too cold... nothing I've tried seems to change the results.",
"the printhead is too hot or too cold... nothing I've",
"it time to adhere, but no changes. I'm trying to",
"high or too hot or too cold or if the",
"messed up if it manages to recover, but usually it",
"what my model looks like: [](https://i.stack.imgur.com/AkcFA.png)",
"to print something a wireframe cube that is at the",
"of paper and try to slip it between the bed",
"description here](https://i.stack.imgur.com/e7mcL.jpg)](https://i.stack.imgur.com/e7mcL.jpg) I'm using a Monoprice 15365. I created my",
"raft or a brim to help adhesion. This is what",
"setting the print speed multiplier to 0.5 to give it",
"bed over and over again. (I use a sheet of",
"start again. It will print one horizontal line (across the",
"the print head and everything is screwed up. I've tried",
"3d printing, so I might be missing something obvious. If",
"here is what the first two lines looked like: [](https://i.stack.imgur.com/AkcFA.png) When I printed a good one",
"print the same model and the first layer refuses to",
"on the printhead and on the bed. I'm using black",
"that says it has a print temp of 205-225. I've",
"too cold or if the printhead is too hot or",
"a print temp of 205-225. I've tried printing at 205,",
"speed multiplier to 0.5 to give it time to adhere,",
"1.75mm that says it has a print temp of 205-225.",
"under the printhead.) I've tried increasing the preheat on the",
"having are because the bed is too low or too",
"When I print today, even after multiple attempts to level",
"an SD card. I put the SD card into my",
"to look like: [](https://i.stack.imgur.com/e7mcL.jpg) I'm using a",
"tried leveling the bed over and over again. (I use",
"or if the printhead is too hot or too cold...",
"axis), then when it tries to vertical line (across the",
"in SketchUp, then exported as STL, which I imported into",
"or too hot or too cold or if the printhead",
"again. It will print one horizontal line (across the x",
"leveling the bed over and over again. (I use a",
"using black PLA 1.75mm that says it has a print",
"the extent of my printable size, so I don't know",
"and 225. I've tried a bed temp of 50, 55,",
"print head and everything is screwed up. I've tried leveling",
"along with the print head and everything is screwed up.",
"that I feel a bit of resistance as I push",
"increasing the preheat on the printhead and on the bed.",
"I don't know of a way to use a raft",
"my model looks like: [](https://i.stack.imgur.com/AkcFA.png) When",
"like: [](https://i.stack.imgur.com/ET1Is.jpg) When I print today, even after",
"multiplier to 0.5 to give it time to adhere, but",
"have to cancel and start again. It will print one",
"that are messed up if it manages to recover, but",
"multiple attempts to level the bed, this is what the",
"into my 3d printer and printed from there. Any advice",
"It will print one horizontal line (across the x axis),",
"export a gcode file to an SD card. I put",
"Cura 2.3.1. Then I used Cura to export a gcode",
"printing, so I might be missing something obvious. If so,",
"I printed my model successfully yesterday, but today I'm trying",
"yesterday, but today I'm trying to print the same model",
"me know. I printed my model successfully yesterday, but today",
"I'm trying to print the same model and the first",
"I've tried printing at 205, 210, 215, 220, and 225.",
"like: [](https://i.stack.imgur.com/e7mcL.jpg) I'm using a Monoprice 15365.",
"look like: [](https://i.stack.imgur.com/e7mcL.jpg) I'm using a Monoprice",
"looked like: [](https://i.stack.imgur.com/ET1Is.jpg) When I print today, even",
"something a wireframe cube that is at the extent of",
"card into my 3d printer and printed from there. Any",
"into Cura 2.3.1. Then I used Cura to export a",
"I don't know if the problems I'm having are because",
"layer refuses to adhere, which means at best several layers",
"this is what the first layer tends to look like:",
"layers after that are messed up if it manages to",
"paper under the printhead.) I've tried increasing the preheat on",
"then when it tries to vertical line (across the y",
"(across the x axis), then when it tries to vertical",
"says it has a print temp of 205-225. I've tried",
"SD card. I put the SD card into my 3d",
"time to adhere, but no changes. I'm trying to print",
"and the first layer refuses to adhere, which means at",
"after that are messed up if it manages to recover,",
"but today I'm trying to print the same model and",
"lines looked like: [](https://i.stack.imgur.com/ET1Is.jpg) When I print today,",
"of 50, 55, 60, 65, and 70. I've tried setting",
"70. I've tried setting the print speed multiplier to 0.5",
"but usually it just means I have to cancel and",
"tried a bed temp of 50, 55, 60, 65, and",
"[](https://i.stack.imgur.com/AkcFA.png) When I printed a good",
"sheet of paper and try to slip it between the",
"as STL, which I imported into Cura 2.3.1. Then I",
"hot or too cold... nothing I've tried seems to change",
"When I printed a good one yesterday, here is what",
"I've tried leveling the bed over and over again. (I",
"print today, even after multiple attempts to level the bed,",
"today, even after multiple attempts to level the bed, this",
"means at best several layers after that are messed up",
"what the first layer tends to look like: [](https://i.stack.imgur.com/ET1Is.jpg) When I",
"I printed a good one yesterday, here is what the",
"or too high or too hot or too cold or",
"60, 65, and 70. I've tried setting the print speed",
"might be missing something obvious. If so, please let me",
"wireframe cube that is at the extent of my printable",
"the printhead and on the bed. I'm using black PLA",
"then exported as STL, which I imported into Cura 2.3.1.",
"up if it manages to recover, but usually it just",
"use a raft or a brim to help adhesion. This",
"the first two lines looked like: [](https://i.stack.imgur.com/ET1Is.jpg) When",
"I'm having are because the bed is too low or",
"210, 215, 220, and 225. I've tried a bed temp",
"a Monoprice 15365. I created my model in SketchUp, then",
"temp of 205-225. I've tried printing at 205, 210, 215,",
"problems I'm having are because the bed is too low",
"to 3d printing, so I might be missing something obvious.",
"the print speed multiplier to 0.5 to give it time",
"cancel and start again. It will print one horizontal line",
"my printable size, so I don't know of a way",
"two lines looked like: [](https://i.stack.imgur.com/ET1Is.jpg) When I print",
"created my model in SketchUp, then exported as STL, which",
"I'm trying to print something a wireframe cube that is",
"preheat on the printhead and on the bed. I'm using",
"if it manages to recover, but usually it just means",
"first layer](https://i.stack.imgur.com/ET1Is.jpg)](https://i.stack.imgur.com/ET1Is.jpg) When I print today, even after multiple attempts",
"I feel a bit of resistance as I push and",
"bed, this is what the first layer tends to look",
"cube model](https://i.stack.imgur.com/AkcFA.png)](https://i.stack.imgur.com/AkcFA.png) When I printed a good one yesterday, here",
"imported into Cura 2.3.1. Then I used Cura to export",
"my model successfully yesterday, but today I'm trying to print",
"vertical line (across the y axis) the horizontal line doesn't",
"horizontal line doesn't adhere and gets dragged along with the",
"y axis) the horizontal line doesn't adhere and gets dragged",
"to vertical line (across the y axis) the horizontal line",
"the x axis), then when it tries to vertical line",
"printed a good one yesterday, here is what the first",
"and over again. (I use a sheet of paper and",
"used Cura to export a gcode file to an SD",
"no changes. I'm trying to print something a wireframe cube",
"from there. Any advice is welcome. I don't know if",
"let me know. I printed my model successfully yesterday, but",
"line (across the y axis) the horizontal line doesn't adhere",
"printed my model successfully yesterday, but today I'm trying to",
"to give it time to adhere, but no changes. I'm",
"bed and printhead. I adjust the bed so that I",
"the y axis) the horizontal line doesn't adhere and gets",
"model in SketchUp, then exported as STL, which I imported",
"the first layer tends to look like: [](https://i.stack.imgur.com/e7mcL.jpg) I'm using a Monoprice 15365. I created my model",
"I put the SD card into my 3d printer and",
"at 205, 210, 215, 220, and 225. I've tried a",
"This is what my model looks like: [](https://i.stack.imgur.com/ET1Is.jpg)",
"If so, please let me know. I printed my model",
"be missing something obvious. If so, please let me know.",
"it manages to recover, but usually it just means I",
"a sheet of paper and try to slip it between",
"if the printhead is too hot or too cold... nothing",
"printhead. I adjust the bed so that I feel a",
"the paper under the printhead.) I've tried increasing the preheat",
"first layer refuses to adhere, which means at best several",
"to 0.5 to give it time to adhere, but no",
"layer tends to look like: [](https://i.stack.imgur.com/e7mcL.jpg) I'm",
"print one horizontal line (across the x axis), then when",
"is at the extent of my printable size, so I",
"model looks like: [](https://i.stack.imgur.com/AkcFA.png) When I",
"after multiple attempts to level the bed, this is what",
"adhesion. This is what my model looks like: [](https://i.stack.imgur.com/ET1Is.jpg) When I print today, even after multiple attempts to",
"I print today, even after multiple attempts to level the",
"my model in SketchUp, then exported as STL, which I",
"my 3d printer and printed from there. Any advice is",
"and on the bed. I'm using black PLA 1.75mm that",
"adjust the bed so that I feel a bit of",
"so, please let me know. I printed my model successfully",
"successfully yesterday, but today I'm trying to print the same",
"too hot or too cold... nothing I've tried seems to",
"like: [](https://i.stack.imgur.com/AkcFA.png) When I printed a",
"or too cold... nothing I've tried seems to change the",
"to use a raft or a brim to help adhesion.",
"extent of my printable size, so I don't know of",
"of 205-225. I've tried printing at 205, 210, 215, 220,",
"to export a gcode file to an SD card. I",
"hot or too cold or if the printhead is too",
"bit of resistance as I push and pull the paper",
"recover, but usually it just means I have to cancel",
"axis) the horizontal line doesn't adhere and gets dragged along",
"of a way to use a raft or a brim",
"printhead.) I've tried increasing the preheat on the printhead and",
"black PLA 1.75mm that says it has a print temp",
"first layer tends to look like: [](https://i.stack.imgur.com/e7mcL.jpg)",
"SketchUp, then exported as STL, which I imported into Cura",
"and pull the paper under the printhead.) I've tried increasing",
"Cura to export a gcode file to an SD card.",
"and 70. I've tried setting the print speed multiplier to",
"I've tried a bed temp of 50, 55, 60, 65,",
"the bed, this is what the first layer tends to",
"to an SD card. I put the SD card into",
"help adhesion. This is what my model looks like: [](https://i.stack.imgur.com/AkcFA.png) When I printed a good one yesterday, here is",
"use a sheet of paper and try to slip it",
"a good one yesterday, here is what the first two",
"horizontal line (across the x axis), then when it tries",
"I imported into Cura 2.3.1. Then I used Cura to",
"missing something obvious. If so, please let me know. I",
"know. I printed my model successfully yesterday, but today I'm",
"know of a way to use a raft or a",
"220, and 225. I've tried a bed temp of 50,",
"today I'm trying to print the same model and the",
"of resistance as I push and pull the paper under",
"over again. (I use a sheet of paper and try",
"I adjust the bed so that I feel a bit",
"up. I've tried leveling the bed over and over again.",
"I push and pull the paper under the printhead.) I've",
"bed temp of 50, 55, 60, 65, and 70. I've",
"please let me know. I printed my model successfully yesterday,",
"model successfully yesterday, but today I'm trying to print the",
"2.3.1. Then I used Cura to export a gcode file",
"gets dragged along with the print head and everything is",
"a way to use a raft or a brim to",
"Monoprice 15365. I created my model in SketchUp, then exported",
"a bit of resistance as I push and pull the",
"size, so I don't know of a way to use",
"so that I feel a bit of resistance as I"
] |
[
"am unable to find one. As I was not trained",
"mention of this axle, nor any difficulties in sourcing it.",
"question is: Does this part need to be custom made?",
"my order). I have searched on eBay for it, using",
"to be custom made? The short rod didn't come with",
"order). I have searched on eBay for it, using various",
"of the frame, [Frame Prusa I3 P3Steel v4.0 +RODS](http://www.ebay.co.uk/itm/Frame-Prusa-I3-P3Steel-v4-0-RODS-/182361720200?), and",
"shots taken from the video, [I3 Steel CORDOBESA con extrusor/with",
"mounted for the GT2 belt. This 8 mm rod is",
"the X-axis of the P3Steel: [](https://i.stack.imgur.com/xuYOq.jpg) The",
"part has a special name, or is it just called",
"have constructed this particular frame, no one makes mention of",
"of the assembled idler, with the rod and circlips highlighted:",
"[](https://i.stack.imgur.com/2Nggu.jpg) This images are a little blurry, as they",
"kit that I purchased (nor was it listed in the",
"rod, with grooved ends\"? I have also done a fair",
"custom made? The short rod didn't come with the frame",
"or shown in the photo of the parts - so",
"belt. This 8 mm rod is approximately 20 - 24",
"8 mm rod is approximately 20 - 24 mm in",
"unable to find one. As I was not trained in",
"one. As I was not trained in mechanical engineering, I",
"is it just called a \"smooth rod, with grooved ends\"?",
"just called a \"smooth rod, with grooved ends\"? I have",
"is approximately 20 - 24 mm in length, with grooves",
"listed in the parts list, or shown in the photo",
"bearing is mounted for the GT2 belt. This 8 mm",
"[](https://i.stack.imgur.com/xuYOq.jpg) The X-axis idler end of a",
"idler end of a P3Steel printer, employs an 8 mm",
"this part has a special name, or is it just",
"or is it just called a \"smooth rod, with grooved",
"have also done a fair amount of googling, and although",
"circlips. --- ### Additional images This image shows the \"exploded",
"assembled idler, showing the bearing inside - Freyt view: [](https://i.stack.imgur.com/JPjQR.jpg) Here are images",
"shows the \"exploded view\" and the 8mm rod can be",
"- Freyt view: [](https://i.stack.imgur.com/c63fV.jpg) Side view: [](https://i.stack.imgur.com/2Nggu.jpg) This",
"- 24 mm in length, with grooves at either end,",
"photo of the assembled idler, with the rod and circlips",
"is mounted for the GT2 belt. This 8 mm rod",
"difficulties in sourcing it. I have contacted the supplier of",
"This 8 mm rod is approximately 20 - 24 mm",
"(nor was it listed in the parts list, or shown",
"an 8 mm diameter rod for the axle on which",
"--- ### Additional images This image shows the \"exploded view\"",
"the parts list, or shown in the photo of the",
"the rod and circlips highlighted: [](https://i.stack.imgur.com/1qJ06.jpg) My question",
"idler end](https://i.stack.imgur.com/1qJ06.jpg)](https://i.stack.imgur.com/1qJ06.jpg) My question is: Does this part need to",
"of this axle, nor any difficulties in sourcing it. I",
"a 608zz bearing is mounted for the GT2 belt. This",
"bearing and circlips. --- ### Additional images This image shows",
"clearly seen: [](https://i.stack.imgur.com/JPjQR.jpg)",
"[](https://i.stack.imgur.com/JPjQR.jpg) Here are",
"as if it was omitted with my order). I have",
"arm of P3Steel](https://i.stack.imgur.com/xuYOq.jpg)](https://i.stack.imgur.com/xuYOq.jpg) The X-axis idler end of a P3Steel",
"view](https://i.stack.imgur.com/2Nggu.jpg)](https://i.stack.imgur.com/2Nggu.jpg) This images are a little blurry, as they are",
"terms, and I am unable to find one. As I",
"although I have found some people who have constructed this",
"frame, no one makes mention of this axle, nor any",
"are a little blurry, as they are screen shots taken",
"for the GT2 belt. This 8 mm rod is approximately",
"which a 608zz bearing is mounted for the GT2 belt.",
"has a special name, or is it just called a",
"of X-axis idler](https://i.stack.imgur.com/JPjQR.jpg)](https://i.stack.imgur.com/JPjQR.jpg) Here are images of the assembled idler,",
"have found some people who have constructed this particular frame,",
"mm in length, with grooves at either end, for circlips.",
"this particular frame, no one makes mention of this axle,",
"X-axis of the P3Steel: [](https://i.stack.imgur.com/xuYOq.jpg) The X-axis",
"The X-axis idler end of a P3Steel printer, employs an",
"mm diameter rod for the axle on which a 608zz",
"images of the assembled idler, showing the bearing inside -",
"highlighted: [](https://i.stack.imgur.com/1qJ06.jpg) My question is: Does this part",
"the frame kit that I purchased (nor was it listed",
"of the parts of X-axis idler](https://i.stack.imgur.com/JPjQR.jpg)](https://i.stack.imgur.com/JPjQR.jpg) Here are images of",
"the assembled idler, showing the bearing inside - Freyt view:",
"assembled idler, with the rod and circlips highlighted: [](https://i.stack.imgur.com/1qJ06.jpg) My question is:",
"photo of the parts - so it not as if",
"who have constructed this particular frame, no one makes mention",
"of the parts - so it not as if it",
"one makes mention of this axle, nor any difficulties in",
"608zz bearing and circlips. --- ### Additional images This image",
"view\" and the 8mm rod can be clearly seen: [](https://i.stack.imgur.com/c63fV.jpg) Side view: [](https://i.stack.imgur.com/2Nggu.jpg) This images are a",
"blurry, as they are screen shots taken from the video,",
"amount of googling, and although I have found some people",
"particular frame, no one makes mention of this axle, nor",
"idler, with the rod and circlips highlighted: [](https://i.stack.imgur.com/1qJ06.jpg)",
"done a fair amount of googling, and although I have",
"608zz bearing is mounted for the GT2 belt. This 8",
"of a P3Steel printer, employs an 8 mm diameter rod",
"short rod didn't come with the frame kit that I",
"my build progress - I already have the 608zz bearing",
"find one. As I was not trained in mechanical engineering,",
"GT2 belt. This 8 mm rod is approximately 20 -",
"little blurry, as they are screen shots taken from the",
"some people who have constructed this particular frame, no one",
"end of a P3Steel printer, employs an 8 mm diameter",
"mechanical engineering, I am not sure if this part has",
"and circlips. --- ### Additional images This image shows the",
"24 mm in length, with grooves at either end, for",
"engineering, I am not sure if this part has a",
"the 8mm rod can be clearly seen: [](https://i.stack.imgur.com/1qJ06.jpg) My question is: Does this part need to be",
"missing part is holding up my build progress - I",
"reply. This missing part is holding up my build progress",
"a \"smooth rod, with grooved ends\"? I have also done",
"as they are screen shots taken from the video, [I3",
"it. I have contacted the supplier of the frame, [Frame",
"for the axle on which a 608zz bearing is mounted",
"so it not as if it was omitted with my",
"contacted the supplier of the frame, [Frame Prusa I3 P3Steel",
"[](https://i.stack.imgur.com/1qJ06.jpg) My question is: Does this part need",
"\"exploded view\" and the 8mm rod can be clearly seen:",
"special name, or is it just called a \"smooth rod,",
"X-axis idler end of a P3Steel printer, employs an 8",
"I am unable to find one. As I was not",
"\"smooth rod, with grooved ends\"? I have also done a",
"it just called a \"smooth rod, with grooved ends\"? I",
"I have searched on eBay for it, using various search",
"view: [](https://i.stack.imgur.com/c63fV.jpg) Side view: [](https://i.stack.imgur.com/2Nggu.jpg) This images are",
"parts list, or shown in the photo of the parts",
"on eBay for it, using various search terms, and I",
"with my order). I have searched on eBay for it,",
"searched on eBay for it, using various search terms, and",
"I3 P3Steel v4.0 +RODS](http://www.ebay.co.uk/itm/Frame-Prusa-I3-P3Steel-v4-0-RODS-/182361720200?), and I am awaiting a reply.",
"grooves at either end, for circlips. A photo of the",
"search terms, and I am unable to find one. As",
"the supplier of the frame, [Frame Prusa I3 P3Steel v4.0",
"makes mention of this axle, nor any difficulties in sourcing",
"are screen shots taken from the video, [I3 Steel CORDOBESA",
"This missing part is holding up my build progress -",
"is holding up my build progress - I already have",
"diameter rod for the axle on which a 608zz bearing",
"the parts of X-axis idler](https://i.stack.imgur.com/JPjQR.jpg)](https://i.stack.imgur.com/JPjQR.jpg) Here are images of the",
"was it listed in the parts list, or shown in",
"this axle, nor any difficulties in sourcing it. I have",
"Here are images of the assembled idler, showing the bearing",
"in sourcing it. I have contacted the supplier of the",
"using various search terms, and I am unable to find",
"have searched on eBay for it, using various search terms,",
"made? The short rod didn't come with the frame kit",
"come with the frame kit that I purchased (nor was",
"also done a fair amount of googling, and although I",
"- so it not as if it was omitted with",
"P3Steel](https://i.stack.imgur.com/xuYOq.jpg)](https://i.stack.imgur.com/xuYOq.jpg) The X-axis idler end of a P3Steel printer, employs",
"My question is: Does this part need to be custom",
"on which a 608zz bearing is mounted for the GT2",
"already have the 608zz bearing and circlips. --- ### Additional",
"Additional images This image shows the \"exploded view\" and the",
"with the frame kit that I purchased (nor was it",
"the \"exploded view\" and the 8mm rod can be clearly",
"list, or shown in the photo of the parts -",
"P3Steel v4.0 +RODS](http://www.ebay.co.uk/itm/Frame-Prusa-I3-P3Steel-v4-0-RODS-/182361720200?), and I am awaiting a reply. This",
"for circlips. A photo of the assembled idler, with the",
"am awaiting a reply. This missing part is holding up",
"circlips highlighted: [](https://i.stack.imgur.com/1qJ06.jpg) My question is: Does this",
"is: Does this part need to be custom made? The",
"grooved ends\"? I have also done a fair amount of",
"axle on which a 608zz bearing is mounted for the",
"of googling, and although I have found some people who",
"and I am unable to find one. As I was",
"omitted with my order). I have searched on eBay for",
"parts of X-axis idler](https://i.stack.imgur.com/JPjQR.jpg)](https://i.stack.imgur.com/JPjQR.jpg) Here are images of the assembled",
"I already have the 608zz bearing and circlips. --- ###",
"found some people who have constructed this particular frame, no",
"idler, showing the bearing inside - Freyt view: [](https://i.stack.imgur.com/c63fV.jpg)",
"view: [](https://i.stack.imgur.com/2Nggu.jpg) This images are a little blurry, as",
"rod can be clearly seen: [](https://i.stack.imgur.com/2Nggu.jpg) This images are a little blurry,",
"the bearing inside - Freyt view: [](https://i.stack.imgur.com/c63fV.jpg) Side view:",
"length, with grooves at either end, for circlips. A photo",
"have contacted the supplier of the frame, [Frame Prusa I3",
"A photo of the assembled idler, with the rod and",
"X-axis idler](https://i.stack.imgur.com/JPjQR.jpg)](https://i.stack.imgur.com/JPjQR.jpg) Here are images of the assembled idler, showing",
"frame kit that I purchased (nor was it listed in",
"was not trained in mechanical engineering, I am not sure",
"I purchased (nor was it listed in the parts list,",
"the photo of the parts - so it not as",
"the 608zz bearing and circlips. --- ### Additional images This",
"either end, for circlips. A photo of the assembled idler,",
"any difficulties in sourcing it. I have contacted the supplier",
"I have found some people who have constructed this particular",
"it listed in the parts list, or shown in the",
"at either end, for circlips. A photo of the assembled",
"of the assembled idler, showing the bearing inside - Freyt",
"with grooved ends\"? I have also done a fair amount",
"I have also done a fair amount of googling, and",
"end, for circlips. A photo of the assembled idler, with",
"P3Steel printer, employs an 8 mm diameter rod for the",
"I have contacted the supplier of the frame, [Frame Prusa",
"in the photo of the parts - so it not",
"that I purchased (nor was it listed in the parts",
"approximately 20 - 24 mm in length, with grooves at",
"8 mm diameter rod for the axle on which a",
"not as if it was omitted with my order). I",
"up my build progress - I already have the 608zz",
"This image shows the \"exploded view\" and the 8mm rod",
"rod for the axle on which a 608zz bearing is",
"of P3Steel](https://i.stack.imgur.com/xuYOq.jpg)](https://i.stack.imgur.com/xuYOq.jpg) The X-axis idler end of a P3Steel printer,",
"the axle on which a 608zz bearing is mounted for",
"with the rod and circlips highlighted: [](https://i.stack.imgur.com/1qJ06.jpg) My",
"if it was omitted with my order). I have searched",
"of the P3Steel: [](https://i.stack.imgur.com/xuYOq.jpg) The X-axis idler",
"to find one. As I was not trained in mechanical",
"As I was not trained in mechanical engineering, I am",
"a fair amount of googling, and although I have found",
"a little blurry, as they are screen shots taken from",
"if this part has a special name, or is it",
"inside - Freyt view: [](https://i.stack.imgur.com/c63fV.jpg) Side view: [](https://i.stack.imgur.com/2Nggu.jpg)",
"P3Steel: [](https://i.stack.imgur.com/xuYOq.jpg) The X-axis idler end of",
"in mechanical engineering, I am not sure if this part",
"purchased (nor was it listed in the parts list, or",
"### Additional images This image shows the \"exploded view\" and",
"need to be custom made? The short rod didn't come",
"I am not sure if this part has a special",
"awaiting a reply. This missing part is holding up my",
"bearing inside - Freyt view: [](https://i.stack.imgur.com/c63fV.jpg) Side view: [.",
"v4.0 +RODS](http://www.ebay.co.uk/itm/Frame-Prusa-I3-P3Steel-v4-0-RODS-/182361720200?), and I am awaiting a reply. This missing",
"in the parts list, or shown in the photo of",
"they are screen shots taken from the video, [I3 Steel",
"googling, and although I have found some people who have",
"it, using various search terms, and I am unable to",
"frame, [Frame Prusa I3 P3Steel v4.0 +RODS](http://www.ebay.co.uk/itm/Frame-Prusa-I3-P3Steel-v4-0-RODS-/182361720200?), and I am",
"[Frame Prusa I3 P3Steel v4.0 +RODS](http://www.ebay.co.uk/itm/Frame-Prusa-I3-P3Steel-v4-0-RODS-/182361720200?), and I am awaiting",
"is the X-axis of the P3Steel: [](https://i.stack.imgur.com/xuYOq.jpg)",
"idler](https://i.stack.imgur.com/JPjQR.jpg)](https://i.stack.imgur.com/JPjQR.jpg) Here are images of the assembled idler, showing the",
"the parts - so it not as if it was",
"constructed this particular frame, no one makes mention of this",
"holding up my build progress - I already have the",
"for it, using various search terms, and I am unable",
"a reply. This missing part is holding up my build",
"+RODS](http://www.ebay.co.uk/itm/Frame-Prusa-I3-P3Steel-v4-0-RODS-/182361720200?), and I am awaiting a reply. This missing part",
"didn't come with the frame kit that I purchased (nor",
"- I already have the 608zz bearing and circlips. ---",
"it not as if it was omitted with my order).",
"no one makes mention of this axle, nor any difficulties",
"was omitted with my order). I have searched on eBay",
"called a \"smooth rod, with grooved ends\"? I have also",
"This images are a little blurry, as they are screen",
"the P3Steel: [](https://i.stack.imgur.com/xuYOq.jpg) The X-axis idler end",
"image shows the \"exploded view\" and the 8mm rod can",
"and circlips highlighted: [](https://i.stack.imgur.com/1qJ06.jpg) My question is: Does",
"fair amount of googling, and although I have found some",
"the assembled idler, with the rod and circlips highlighted: [](https://i.stack.imgur.com/c63fV.jpg) Side view: [](https://i.stack.imgur.com/2Nggu.jpg) This images",
"the frame, [Frame Prusa I3 P3Steel v4.0 +RODS](http://www.ebay.co.uk/itm/Frame-Prusa-I3-P3Steel-v4-0-RODS-/182361720200?), and I",
"not trained in mechanical engineering, I am not sure if",
"and although I have found some people who have constructed",
"a P3Steel printer, employs an 8 mm diameter rod for",
"eBay for it, using various search terms, and I am",
"be custom made? The short rod didn't come with the",
"supplier of the frame, [Frame Prusa I3 P3Steel v4.0 +RODS](http://www.ebay.co.uk/itm/Frame-Prusa-I3-P3Steel-v4-0-RODS-/182361720200?),",
"I am awaiting a reply. This missing part is holding",
"it was omitted with my order). I have searched on",
"view](https://i.stack.imgur.com/c63fV.jpg)](https://i.stack.imgur.com/c63fV.jpg) Side view: [](https://i.stack.imgur.com/2Nggu.jpg) This images are a little",
"a special name, or is it just called a \"smooth",
"ends\"? I have also done a fair amount of googling,",
"sure if this part has a special name, or is",
"screen shots taken from the video, [I3 Steel CORDOBESA con",
"seen: [](https://i.stack.imgur.com/JPjQR.jpg) Here",
"the GT2 belt. This 8 mm rod is approximately 20",
"am not sure if this part has a special name,",
"not sure if this part has a special name, or",
"Prusa I3 P3Steel v4.0 +RODS](http://www.ebay.co.uk/itm/Frame-Prusa-I3-P3Steel-v4-0-RODS-/182361720200?), and I am awaiting a",
"8mm rod can be clearly seen: [](https://i.stack.imgur.com/c63fV.jpg) Side",
"be clearly seen: [![Exploded view of the parts of X-axis"
] |
[
"an overview of what things should be calibrated (and in",
"things should be calibrated (and in what order) for a",
"* determining the print temperature, e.g. [RepRap Neo's youtube tutorial](https://www.youtube.com/watch?v=FSOPsRiiOZk)",
"order) for a certain 3d printer or after changing the",
"(and in what order) for a certain 3d printer or",
"determining the print temperature, e.g. [RepRap Neo's youtube tutorial](https://www.youtube.com/watch?v=FSOPsRiiOZk) *",
"after changing the printing material? I only know about: *",
"anybody have an overview of what things should be calibrated",
"e.g. [RepRap Neo's youtube tutorial](https://www.youtube.com/watch?v=FSOPsRiiOZk) * calibrating the extrusion multiplier",
"each different filament), e.g. [RepRap 101's youtube tutorial](https://www.youtube.com/watch?v=cnjE5udkNEA) How to",
"101's youtube tutorial](https://www.youtube.com/watch?v=cnjE5udkNEA) How to calibrate/determine the maximum speeds or",
"(for each different filament), e.g. [RepRap 101's youtube tutorial](https://www.youtube.com/watch?v=cnjE5udkNEA) How",
"in what order) for a certain 3d printer or after",
"calibrating the extruder steps per mm, e.g. [Tom's youtube tutorial](https://www.youtube.com/watch?v=YUPfBJz3I6Y)",
"for a certain 3d printer or after changing the printing",
"filament), e.g. [RepRap 101's youtube tutorial](https://www.youtube.com/watch?v=cnjE5udkNEA) How to calibrate/determine the",
"calibrating the extrusion multiplier (for each different filament), e.g. [RepRap",
"be calibrated (and in what order) for a certain 3d",
"overview of what things should be calibrated (and in what",
"changing the printing material? I only know about: * calibrating",
"e.g. [RepRap 101's youtube tutorial](https://www.youtube.com/watch?v=cnjE5udkNEA) How to calibrate/determine the maximum",
"Does anybody have an overview of what things should be",
"the extrusion multiplier (for each different filament), e.g. [RepRap 101's",
"extrusion multiplier (for each different filament), e.g. [RepRap 101's youtube",
"a certain 3d printer or after changing the printing material?",
"youtube tutorial](https://www.youtube.com/watch?v=YUPfBJz3I6Y) * determining the print temperature, e.g. [RepRap Neo's",
"I only know about: * calibrating the extruder steps per",
"of what things should be calibrated (and in what order)",
"the print temperature, e.g. [RepRap Neo's youtube tutorial](https://www.youtube.com/watch?v=FSOPsRiiOZk) * calibrating",
"[RepRap Neo's youtube tutorial](https://www.youtube.com/watch?v=FSOPsRiiOZk) * calibrating the extrusion multiplier (for",
"* calibrating the extruder steps per mm, e.g. [Tom's youtube",
"what order) for a certain 3d printer or after changing",
"the printing material? I only know about: * calibrating the",
"printer or after changing the printing material? I only know",
"Neo's youtube tutorial](https://www.youtube.com/watch?v=FSOPsRiiOZk) * calibrating the extrusion multiplier (for each",
"youtube tutorial](https://www.youtube.com/watch?v=FSOPsRiiOZk) * calibrating the extrusion multiplier (for each different",
"temperature, e.g. [RepRap Neo's youtube tutorial](https://www.youtube.com/watch?v=FSOPsRiiOZk) * calibrating the extrusion",
"multiplier (for each different filament), e.g. [RepRap 101's youtube tutorial](https://www.youtube.com/watch?v=cnjE5udkNEA)",
"[Tom's youtube tutorial](https://www.youtube.com/watch?v=YUPfBJz3I6Y) * determining the print temperature, e.g. [RepRap",
"steps per mm, e.g. [Tom's youtube tutorial](https://www.youtube.com/watch?v=YUPfBJz3I6Y) * determining the",
"[RepRap 101's youtube tutorial](https://www.youtube.com/watch?v=cnjE5udkNEA) How to calibrate/determine the maximum speeds",
"about: * calibrating the extruder steps per mm, e.g. [Tom's",
"tutorial](https://www.youtube.com/watch?v=FSOPsRiiOZk) * calibrating the extrusion multiplier (for each different filament),",
"mm, e.g. [Tom's youtube tutorial](https://www.youtube.com/watch?v=YUPfBJz3I6Y) * determining the print temperature,",
"tutorial](https://www.youtube.com/watch?v=YUPfBJz3I6Y) * determining the print temperature, e.g. [RepRap Neo's youtube",
"only know about: * calibrating the extruder steps per mm,",
"know about: * calibrating the extruder steps per mm, e.g.",
"the extruder steps per mm, e.g. [Tom's youtube tutorial](https://www.youtube.com/watch?v=YUPfBJz3I6Y) *",
"3d printer or after changing the printing material? I only",
"what things should be calibrated (and in what order) for",
"calibrated (and in what order) for a certain 3d printer",
"have an overview of what things should be calibrated (and",
"e.g. [Tom's youtube tutorial](https://www.youtube.com/watch?v=YUPfBJz3I6Y) * determining the print temperature, e.g.",
"* calibrating the extrusion multiplier (for each different filament), e.g.",
"should be calibrated (and in what order) for a certain",
"material? I only know about: * calibrating the extruder steps",
"different filament), e.g. [RepRap 101's youtube tutorial](https://www.youtube.com/watch?v=cnjE5udkNEA) How to calibrate/determine",
"certain 3d printer or after changing the printing material? I",
"per mm, e.g. [Tom's youtube tutorial](https://www.youtube.com/watch?v=YUPfBJz3I6Y) * determining the print",
"extruder steps per mm, e.g. [Tom's youtube tutorial](https://www.youtube.com/watch?v=YUPfBJz3I6Y) * determining",
"print temperature, e.g. [RepRap Neo's youtube tutorial](https://www.youtube.com/watch?v=FSOPsRiiOZk) * calibrating the",
"youtube tutorial](https://www.youtube.com/watch?v=cnjE5udkNEA) How to calibrate/determine the maximum speeds or accelerations?",
"or after changing the printing material? I only know about:",
"printing material? I only know about: * calibrating the extruder"
] |
[
"+ For those slow speeds, heat block temperature should be",
"other property of the material >*, which determines how fast",
"running filament also cools down the heat block, but we",
"two questions (or to be more precise, one question on",
"doesn't have time to equalize. + At that point, it",
"the material >*, which determines how fast it heats up.",
"anyone who has studied physics / thermodynamics, this is probably",
"based on the increased throughput? For anyone who has studied",
"reasoning. * Presumably, every material has an optimal printing temperature",
"when filament throughput is increased (by increasing movement speed or",
"block temperature will always have to be higher than the",
"can I come up with the proper unit. The material",
"there a good rule of thumb for this, to help",
"material probably approaches the temperature of the environment asymptotically. This",
"every material has an optimal printing temperature just above its",
"higher than the mark, because the filament doesn't have time",
"Let me know if I make any errors in reasoning.",
"zone. That much seems clear from practical experience. But I",
"this is probably simple stuff. But has the work been",
"because the filament will have less time to spend in",
"read filament temperature. It reads the heat block temperature. *",
"almost certainly missing some key insights. I'm curious to know",
"precise, one question on two levels): 1. Is there a",
"(by increasing movement speed or extrusion width/height), printing temperature also",
"but we can ignore this. If this effect is significant",
"ignore this. If this effect is significant at all (is",
"a balancing act. Find the best heat block temperature (°C)",
"this is already compensated for by the PID controller. I'm",
"heat block, but we can ignore this. If this effect",
"start off with. Let me know if I make any",
"this, to help people calibrate their settings? 2. How much",
"I make any errors in reasoning. * Presumably, every material",
"2. How much do we know about the formula governing",
"increased throughput? For anyone who has studied physics / thermodynamics,",
"by the PID controller. I'm almost certainly missing some key",
"than the mark, because the filament doesn't have time to",
"the material's optimal printing temperature. * For greater speeds, however,",
"slow speeds, heat block temperature should be set exactly to",
"* But the thermistor doesn't read filament temperature. It reads",
"this. If this effect is significant at all (is it?),",
"with the proper unit. The material probably approaches the temperature",
"for by the PID controller. I'm almost certainly missing some",
"the temperature of the environment asymptotically. This is where thermodynamics",
"how fast it heats up. I don't know what that",
"time to equalize with the temperature of the heat block",
"that point, it becomes a balancing act. Find the best",
"the nozzle. + For those slow speeds, heat block temperature",
"act. Find the best heat block temperature (°C) given a",
"material's optimal printing temperature. * For greater speeds, however, heat",
"clear from practical experience. But I have two questions (or",
"doesn't read filament temperature. It reads the heat block temperature.",
"reads the heat block temperature. * Below a certain throughput,",
"thermistor doesn't read filament temperature. It reads the heat block",
"stuff. But has the work been done for 3D printing",
"which determines how fast it heats up. I don't know",
"the optimal printing temperature for a given material (°C), the",
"missing some key insights. I'm curious to know what work",
"is practically applicable? I share the following train of thought",
"has an optimal printing temperature just above its melting point.",
"It seems that when filament throughput is increased (by increasing",
"printing specifically, in a way that is practically applicable? I",
"the heat block, but we can ignore this. If this",
"melting point. * But the thermistor doesn't read filament temperature.",
"a given material (°C), the volume of the melting zone",
"material has an optimal printing temperature just above its melting",
"compensate, because the filament will have less time to spend",
"up with the proper unit. The material probably approaches the",
"be higher than the mark, because the filament doesn't have",
"the volume of the melting zone (mm³) and *< some",
"this behavior? Can we calculate the required hotend temperature *precisely*",
"seems that when filament throughput is increased (by increasing movement",
"some other property of the material >*, which determines how",
"it leaves the nozzle. + For those slow speeds, heat",
"heat block temperature will always have to be higher than",
"(°C) given a rate of throughput (mm³/s), the optimal printing",
"levels): 1. Is there a good rule of thumb for",
"But the thermistor doesn't read filament temperature. It reads the",
"way that is practically applicable? I share the following train",
"following train of thought to start off with. Let me",
"exactly to the material's optimal printing temperature. * For greater",
"of the environment asymptotically. This is where thermodynamics comes in,",
"the heat block before it leaves the nozzle. + For",
"make any errors in reasoning. * Presumably, every material has",
"block temperature. * Below a certain throughput, the temperature of",
"can ignore this. If this effect is significant at all",
"The material probably approaches the temperature of the environment asymptotically.",
"heat block temperature. * Below a certain throughput, the temperature",
"those slow speeds, heat block temperature should be set exactly",
"is where thermodynamics comes in, I guess. * Theoretically, running",
"that last property is, nor can I come up with",
"in, I guess. * Theoretically, running filament also cools down",
"Can we calculate the required hotend temperature *precisely* based on",
"For those slow speeds, heat block temperature should be set",
"rate of throughput (mm³/s), the optimal printing temperature for a",
"have less time to spend in the melting zone. That",
"what that last property is, nor can I come up",
"zone (mm³) and *< some other property of the material",
"a good rule of thumb for this, to help people",
"any errors in reasoning. * Presumably, every material has an",
"But has the work been done for 3D printing specifically,",
"This is where thermodynamics comes in, I guess. * Theoretically,",
"practically applicable? I share the following train of thought to",
"the melting zone (mm³) and *< some other property of",
"just above its melting point. * But the thermistor doesn't",
"to be higher than the mark, because the filament doesn't",
"in the melting zone. That much seems clear from practical",
"about the formula governing this behavior? Can we calculate the",
"we know about the formula governing this behavior? Can we",
"or extrusion width/height), printing temperature also has to be increased",
"asymptotically. This is where thermodynamics comes in, I guess. *",
"time to equalize. + At that point, it becomes a",
"to spend in the melting zone. That much seems clear",
"equalize with the temperature of the heat block before it",
"seems clear from practical experience. But I have two questions",
"and *< some other property of the material >*, which",
"(is it?), this is already compensated for by the PID",
"balancing act. Find the best heat block temperature (°C) given",
"good rule of thumb for this, to help people calibrate",
"is already compensated for by the PID controller. I'm almost",
"on two levels): 1. Is there a good rule of",
"required hotend temperature *precisely* based on the increased throughput? For",
"rule of thumb for this, to help people calibrate their",
"thermodynamics comes in, I guess. * Theoretically, running filament also",
"temperature of the heat block before it leaves the nozzle.",
"specifically, in a way that is practically applicable? I share",
"to start off with. Let me know if I make",
"property of the material >*, which determines how fast it",
"is, nor can I come up with the proper unit.",
"comes in, I guess. * Theoretically, running filament also cools",
"have time to equalize with the temperature of the heat",
"throughput, the temperature of the filament will have time to",
"nozzle. + For those slow speeds, heat block temperature should",
"for a given material (°C), the volume of the melting",
"to be increased to compensate, because the filament will have",
"all (is it?), this is already compensated for by the",
"controller. I'm almost certainly missing some key insights. I'm curious",
"printing temperature for a given material (°C), the volume of",
"I come up with the proper unit. The material probably",
"compensated for by the PID controller. I'm almost certainly missing",
"throughput? For anyone who has studied physics / thermodynamics, this",
"significant at all (is it?), this is already compensated for",
"* Theoretically, running filament also cools down the heat block,",
"Theoretically, running filament also cools down the heat block, but",
"before it leaves the nozzle. + For those slow speeds,",
"the best heat block temperature (°C) given a rate of",
"much do we know about the formula governing this behavior?",
"also has to be increased to compensate, because the filament",
"given material (°C), the volume of the melting zone (mm³)",
"above its melting point. * But the thermistor doesn't read",
"nor can I come up with the proper unit. The",
"If this effect is significant at all (is it?), this",
"heat block temperature (°C) given a rate of throughput (mm³/s),",
"is significant at all (is it?), this is already compensated",
"thumb for this, to help people calibrate their settings? 2.",
"up. I don't know what that last property is, nor",
"train of thought to start off with. Let me know",
"if I make any errors in reasoning. * Presumably, every",
"from practical experience. But I have two questions (or to",
"of thumb for this, to help people calibrate their settings?",
"filament temperature. It reads the heat block temperature. * Below",
"/ thermodynamics, this is probably simple stuff. But has the",
"melting zone (mm³) and *< some other property of the",
"unit. The material probably approaches the temperature of the environment",
"melting zone. That much seems clear from practical experience. But",
"speed or extrusion width/height), printing temperature also has to be",
"the required hotend temperature *precisely* based on the increased throughput?",
"share the following train of thought to start off with.",
"two levels): 1. Is there a good rule of thumb",
"with. Let me know if I make any errors in",
"to help people calibrate their settings? 2. How much do",
"of the material >*, which determines how fast it heats",
"*< some other property of the material >*, which determines",
"point, it becomes a balancing act. Find the best heat",
"know what that last property is, nor can I come",
"time to spend in the melting zone. That much seems",
"we can ignore this. If this effect is significant at",
"has studied physics / thermodynamics, this is probably simple stuff.",
"It reads the heat block temperature. * Below a certain",
"extrusion width/height), printing temperature also has to be increased to",
"increased (by increasing movement speed or extrusion width/height), printing temperature",
">*, which determines how fast it heats up. I don't",
"some key insights. I'm curious to know what work has",
"That much seems clear from practical experience. But I have",
"optimal printing temperature. * For greater speeds, however, heat block",
"How much do we know about the formula governing this",
"movement speed or extrusion width/height), printing temperature also has to",
"the filament will have less time to spend in the",
"I have two questions (or to be more precise, one",
"a rate of throughput (mm³/s), the optimal printing temperature for",
"guess. * Theoretically, running filament also cools down the heat",
"of the filament will have time to equalize with the",
"width/height), printing temperature also has to be increased to compensate,",
"on the increased throughput? For anyone who has studied physics",
"of the heat block before it leaves the nozzle. +",
"increased to compensate, because the filament will have less time",
"to compensate, because the filament will have less time to",
"in reasoning. * Presumably, every material has an optimal printing",
"down the heat block, but we can ignore this. If",
"increasing movement speed or extrusion width/height), printing temperature also has",
"greater speeds, however, heat block temperature will always have to",
"of the melting zone (mm³) and *< some other property",
"material (°C), the volume of the melting zone (mm³) and",
"we calculate the required hotend temperature *precisely* based on the",
"volume of the melting zone (mm³) and *< some other",
"to equalize with the temperature of the heat block before",
"probably approaches the temperature of the environment asymptotically. This is",
"settings? 2. How much do we know about the formula",
"insights. I'm curious to know what work has been done.",
"(°C), the volume of the melting zone (mm³) and *<",
"a certain throughput, the temperature of the filament will have",
"fast it heats up. I don't know what that last",
"formula governing this behavior? Can we calculate the required hotend",
"(mm³) and *< some other property of the material >*,",
"the thermistor doesn't read filament temperature. It reads the heat",
"experience. But I have two questions (or to be more",
"+ At that point, it becomes a balancing act. Find",
"at all (is it?), this is already compensated for by",
"should be set exactly to the material's optimal printing temperature.",
"to be more precise, one question on two levels): 1.",
"filament throughput is increased (by increasing movement speed or extrusion",
"temperature (°C) given a rate of throughput (mm³/s), the optimal",
"practical experience. But I have two questions (or to be",
"temperature for a given material (°C), the volume of the",
"throughput (mm³/s), the optimal printing temperature for a given material",
"block temperature (°C) given a rate of throughput (mm³/s), the",
"be set exactly to the material's optimal printing temperature. *",
"to the material's optimal printing temperature. * For greater speeds,",
"be more precise, one question on two levels): 1. Is",
"(mm³/s), the optimal printing temperature for a given material (°C),",
"studied physics / thermodynamics, this is probably simple stuff. But",
"more precise, one question on two levels): 1. Is there",
"in a way that is practically applicable? I share the",
"the increased throughput? For anyone who has studied physics /",
"Presumably, every material has an optimal printing temperature just above",
"governing this behavior? Can we calculate the required hotend temperature",
"last property is, nor can I come up with the",
"have time to equalize. + At that point, it becomes",
"best heat block temperature (°C) given a rate of throughput",
"speeds, heat block temperature should be set exactly to the",
"leaves the nozzle. + For those slow speeds, heat block",
"is increased (by increasing movement speed or extrusion width/height), printing",
"printing temperature just above its melting point. * But the",
"much seems clear from practical experience. But I have two",
"the temperature of the heat block before it leaves the",
"heats up. I don't know what that last property is,",
"I guess. * Theoretically, running filament also cools down the",
"PID controller. I'm almost certainly missing some key insights. I'm",
"who has studied physics / thermodynamics, this is probably simple",
"have to be higher than the mark, because the filament",
"the PID controller. I'm almost certainly missing some key insights.",
"optimal printing temperature for a given material (°C), the volume",
"throughput is increased (by increasing movement speed or extrusion width/height),",
"proper unit. The material probably approaches the temperature of the",
"approaches the temperature of the environment asymptotically. This is where",
"* Below a certain throughput, the temperature of the filament",
"material >*, which determines how fast it heats up. I",
"an optimal printing temperature just above its melting point. *",
"the heat block temperature. * Below a certain throughput, the",
"thought to start off with. Let me know if I",
"(or to be more precise, one question on two levels):",
"temperature just above its melting point. * But the thermistor",
"determines how fast it heats up. I don't know what",
"have two questions (or to be more precise, one question",
"printing temperature. * For greater speeds, however, heat block temperature",
"thermodynamics, this is probably simple stuff. But has the work",
"printing temperature also has to be increased to compensate, because",
"people calibrate their settings? 2. How much do we know",
"is probably simple stuff. But has the work been done",
"key insights. I'm curious to know what work has been",
"heat block temperature should be set exactly to the material's",
"applicable? I share the following train of thought to start",
"don't know what that last property is, nor can I",
"* For greater speeds, however, heat block temperature will always",
"will have less time to spend in the melting zone.",
"help people calibrate their settings? 2. How much do we",
"Below a certain throughput, the temperature of the filament will",
"heat block before it leaves the nozzle. + For those",
"block, but we can ignore this. If this effect is",
"one question on two levels): 1. Is there a good",
"of thought to start off with. Let me know if",
"has the work been done for 3D printing specifically, in",
"where thermodynamics comes in, I guess. * Theoretically, running filament",
"block temperature should be set exactly to the material's optimal",
"filament will have time to equalize with the temperature of",
"off with. Let me know if I make any errors",
"effect is significant at all (is it?), this is already",
"At that point, it becomes a balancing act. Find the",
"Find the best heat block temperature (°C) given a rate",
"question on two levels): 1. Is there a good rule",
"the mark, because the filament doesn't have time to equalize.",
"behavior? Can we calculate the required hotend temperature *precisely* based",
"work been done for 3D printing specifically, in a way",
"always have to be higher than the mark, because the",
"it?), this is already compensated for by the PID controller.",
"For anyone who has studied physics / thermodynamics, this is",
"already compensated for by the PID controller. I'm almost certainly",
"this effect is significant at all (is it?), this is",
"for 3D printing specifically, in a way that is practically",
"errors in reasoning. * Presumably, every material has an optimal",
"calibrate their settings? 2. How much do we know about",
"its melting point. * But the thermistor doesn't read filament",
"done for 3D printing specifically, in a way that is",
"be increased to compensate, because the filament will have less",
"temperature. * For greater speeds, however, heat block temperature will",
"will always have to be higher than the mark, because",
"becomes a balancing act. Find the best heat block temperature",
"I share the following train of thought to start off",
"less time to spend in the melting zone. That much",
"For greater speeds, however, heat block temperature will always have",
"the temperature of the filament will have time to equalize",
"I'm almost certainly missing some key insights. I'm curious to",
"I don't know what that last property is, nor can",
"spend in the melting zone. That much seems clear from",
"probably simple stuff. But has the work been done for",
"also cools down the heat block, but we can ignore",
"temperature. It reads the heat block temperature. * Below a",
"me know if I make any errors in reasoning. *",
"that when filament throughput is increased (by increasing movement speed",
"temperature should be set exactly to the material's optimal printing",
"certainly missing some key insights. I'm curious to know what",
"come up with the proper unit. The material probably approaches",
"their settings? 2. How much do we know about the",
"the formula governing this behavior? Can we calculate the required",
"property is, nor can I come up with the proper",
"temperature also has to be increased to compensate, because the",
"temperature of the filament will have time to equalize with",
"because the filament doesn't have time to equalize. + At",
"mark, because the filament doesn't have time to equalize. +",
"a way that is practically applicable? I share the following",
"do we know about the formula governing this behavior? Can",
"that is practically applicable? I share the following train of",
"the filament doesn't have time to equalize. + At that",
"it becomes a balancing act. Find the best heat block",
"know if I make any errors in reasoning. * Presumably,",
"given a rate of throughput (mm³/s), the optimal printing temperature",
"*precisely* based on the increased throughput? For anyone who has",
"filament also cools down the heat block, but we can",
"the melting zone. That much seems clear from practical experience.",
"temperature will always have to be higher than the mark,",
"Is there a good rule of thumb for this, to",
"the proper unit. The material probably approaches the temperature of",
"to equalize. + At that point, it becomes a balancing",
"has to be increased to compensate, because the filament will",
"questions (or to be more precise, one question on two",
"physics / thermodynamics, this is probably simple stuff. But has",
"simple stuff. But has the work been done for 3D",
"temperature *precisely* based on the increased throughput? For anyone who",
"hotend temperature *precisely* based on the increased throughput? For anyone",
"3D printing specifically, in a way that is practically applicable?",
"calculate the required hotend temperature *precisely* based on the increased",
"set exactly to the material's optimal printing temperature. * For",
"* Presumably, every material has an optimal printing temperature just",
"equalize. + At that point, it becomes a balancing act.",
"temperature. * Below a certain throughput, the temperature of the",
"filament doesn't have time to equalize. + At that point,",
"temperature of the environment asymptotically. This is where thermodynamics comes",
"point. * But the thermistor doesn't read filament temperature. It",
"1. Is there a good rule of thumb for this,",
"But I have two questions (or to be more precise,",
"cools down the heat block, but we can ignore this.",
"the environment asymptotically. This is where thermodynamics comes in, I",
"however, heat block temperature will always have to be higher",
"of throughput (mm³/s), the optimal printing temperature for a given",
"been done for 3D printing specifically, in a way that",
"it heats up. I don't know what that last property",
"filament will have less time to spend in the melting",
"optimal printing temperature just above its melting point. * But",
"speeds, however, heat block temperature will always have to be",
"with the temperature of the heat block before it leaves",
"the following train of thought to start off with. Let",
"the work been done for 3D printing specifically, in a",
"environment asymptotically. This is where thermodynamics comes in, I guess.",
"know about the formula governing this behavior? Can we calculate",
"the filament will have time to equalize with the temperature",
"certain throughput, the temperature of the filament will have time",
"block before it leaves the nozzle. + For those slow",
"will have time to equalize with the temperature of the",
"for this, to help people calibrate their settings? 2. How"
] |
[
"the [board](http://rotjes.bangblog.eu/reddit/DSC_0113.JPG) I'm not sure if I need to modify",
"hook it up to the A8's motherboard. I have no",
"For now I've resumed using the normal endstop, but I",
"it's connected to the [board](http://rotjes.bangblog.eu/reddit/DSC_0113.JPG) I'm not sure if I",
"if I need to modify the wiring in order to",
"I bought my printer from Gearbest, I also bought the",
"how I can test if it is broken. This is",
"on the A8's mobo, and it's not indicated either. Most",
"christmas. When I bought my printer from Gearbest, I also",
"and it's not indicated either. Most guides deal with using",
"bought my printer from Gearbest, I also bought the inductive",
"be broken. However, I have no idea how I can",
"don't think the board is broken or anything. For now",
"with using RAMPS when it comes to installing such a",
"not sure if I need to modify the wiring in",
"over christmas. When I bought my printer from Gearbest, I",
"think the board is broken or anything. For now I've",
"A8's mobo, and it's not indicated either. Most guides deal",
"deal with using RAMPS when it comes to installing such",
"it's not indicated either. Most guides deal with using RAMPS",
"the pinout is on the A8's mobo, and it's not",
"to installing such a sensor. I'd like to know how",
"pinout is on the A8's mobo, and it's not indicated",
"I also bought the inductive sensor that they [sell](http://www.gearbest.com/3d-printer-parts/pp_591321.html). It",
"comes to installing such a sensor. I'd like to know",
"the normal endstop, but I would like to enable bed",
"[looks](http://rotjes.bangblog.eu/reddit/DSC_0112.JPG) like and how it's connected to the [board](http://rotjes.bangblog.eu/reddit/DSC_0113.JPG) I'm",
"the wiring [looks](http://rotjes.bangblog.eu/reddit/DSC_0112.JPG) like and how it's connected to the",
"now I've resumed using the normal endstop, but I would",
"it is broken. This is what the wiring [looks](http://rotjes.bangblog.eu/reddit/DSC_0112.JPG) like",
"this sensor. (or a different one if necessary) How do",
"broken. However, I have no idea how I can test",
"and how it's connected to the [board](http://rotjes.bangblog.eu/reddit/DSC_0113.JPG) I'm not sure",
"is on the A8's mobo, and it's not indicated either.",
"I've resumed using the normal endstop, but I would like",
"no idea what the pinout is on the A8's mobo,",
"idea how I can test if it is broken. This",
"think it might be broken. However, I have no idea",
"The printer works fine otherwise, so I don't think the",
"I have no idea what the pinout is on the",
"is broken. This is what the wiring [looks](http://rotjes.bangblog.eu/reddit/DSC_0112.JPG) like and",
"bed levelling by installing this sensor. (or a different one",
"It doesn't seem to work, and I think it might",
"seem to work, and I think it might be broken.",
"sure if I need to modify the wiring in order",
"sensor that they [sell](http://www.gearbest.com/3d-printer-parts/pp_591321.html). It doesn't seem to work, and",
"is what the wiring [looks](http://rotjes.bangblog.eu/reddit/DSC_0112.JPG) like and how it's connected",
"and I think it might be broken. However, I have",
"doesn't seem to work, and I think it might be",
"(or a different one if necessary) How do I get",
"[board](http://rotjes.bangblog.eu/reddit/DSC_0113.JPG) I'm not sure if I need to modify the",
"how to connect this to my board, if possible. The",
"otherwise, so I don't think the board is broken or",
"also bought the inductive sensor that they [sell](http://www.gearbest.com/3d-printer-parts/pp_591321.html). It doesn't",
"I don't think the board is broken or anything. For",
"bought the inductive sensor that they [sell](http://www.gearbest.com/3d-printer-parts/pp_591321.html). It doesn't seem",
"I think it might be broken. However, I have no",
"using the normal endstop, but I would like to enable",
"have no idea how I can test if it is",
"they [sell](http://www.gearbest.com/3d-printer-parts/pp_591321.html). It doesn't seem to work, and I think",
"I would like to enable bed levelling by installing this",
"by installing this sensor. (or a different one if necessary)",
"A8 over christmas. When I bought my printer from Gearbest,",
"to my board, if possible. The printer works fine otherwise,",
"wiring [looks](http://rotjes.bangblog.eu/reddit/DSC_0112.JPG) like and how it's connected to the [board](http://rotjes.bangblog.eu/reddit/DSC_0113.JPG)",
"connect this to my board, if possible. The printer works",
"endstop, but I would like to enable bed levelling by",
"my board, if possible. The printer works fine otherwise, so",
"to connect this to my board, if possible. The printer",
"to hook it up to the A8's motherboard. I have",
"the board is broken or anything. For now I've resumed",
"it up to the A8's motherboard. I have no idea",
"I have no idea how I can test if it",
"I bought an Anet A8 over christmas. When I bought",
"broken or anything. For now I've resumed using the normal",
"A8's motherboard. I have no idea what the pinout is",
"fine otherwise, so I don't think the board is broken",
"sensor. I'd like to know how to connect this to",
"printer works fine otherwise, so I don't think the board",
"I need to modify the wiring in order to hook",
"need to modify the wiring in order to hook it",
"installing such a sensor. I'd like to know how to",
"when it comes to installing such a sensor. I'd like",
"connected to the [board](http://rotjes.bangblog.eu/reddit/DSC_0113.JPG) I'm not sure if I need",
"it might be broken. However, I have no idea how",
"When I bought my printer from Gearbest, I also bought",
"the inductive sensor that they [sell](http://www.gearbest.com/3d-printer-parts/pp_591321.html). It doesn't seem to",
"indicated either. Most guides deal with using RAMPS when it",
"either. Most guides deal with using RAMPS when it comes",
"guides deal with using RAMPS when it comes to installing",
"a sensor. I'd like to know how to connect this",
"the A8's motherboard. I have no idea what the pinout",
"this to my board, if possible. The printer works fine",
"installing this sensor. (or a different one if necessary) How",
"board is broken or anything. For now I've resumed using",
"to know how to connect this to my board, if",
"Anet A8 over christmas. When I bought my printer from",
"This is what the wiring [looks](http://rotjes.bangblog.eu/reddit/DSC_0112.JPG) like and how it's",
"if possible. The printer works fine otherwise, so I don't",
"like to enable bed levelling by installing this sensor. (or",
"my printer from Gearbest, I also bought the inductive sensor",
"works fine otherwise, so I don't think the board is",
"the A8's mobo, and it's not indicated either. Most guides",
"sensor. (or a different one if necessary) How do I",
"motherboard. I have no idea what the pinout is on",
"so I don't think the board is broken or anything.",
"modify the wiring in order to hook it up to",
"using RAMPS when it comes to installing such a sensor.",
"enable bed levelling by installing this sensor. (or a different",
"Gearbest, I also bought the inductive sensor that they [sell](http://www.gearbest.com/3d-printer-parts/pp_591321.html).",
"such a sensor. I'd like to know how to connect",
"work, and I think it might be broken. However, I",
"what the pinout is on the A8's mobo, and it's",
"idea what the pinout is on the A8's mobo, and",
"it comes to installing such a sensor. I'd like to",
"or anything. For now I've resumed using the normal endstop,",
"know how to connect this to my board, if possible.",
"no idea how I can test if it is broken.",
"to work, and I think it might be broken. However,",
"if it is broken. This is what the wiring [looks](http://rotjes.bangblog.eu/reddit/DSC_0112.JPG)",
"a different one if necessary) How do I get this",
"resumed using the normal endstop, but I would like to",
"I'm not sure if I need to modify the wiring",
"anything. For now I've resumed using the normal endstop, but",
"I'd like to know how to connect this to my",
"to the A8's motherboard. I have no idea what the",
"to the [board](http://rotjes.bangblog.eu/reddit/DSC_0113.JPG) I'm not sure if I need to",
"would like to enable bed levelling by installing this sensor.",
"up to the A8's motherboard. I have no idea what",
"levelling by installing this sensor. (or a different one if",
"printer from Gearbest, I also bought the inductive sensor that",
"that they [sell](http://www.gearbest.com/3d-printer-parts/pp_591321.html). It doesn't seem to work, and I",
"order to hook it up to the A8's motherboard. I",
"to enable bed levelling by installing this sensor. (or a",
"in order to hook it up to the A8's motherboard.",
"normal endstop, but I would like to enable bed levelling",
"the wiring in order to hook it up to the",
"RAMPS when it comes to installing such a sensor. I'd",
"but I would like to enable bed levelling by installing",
"can test if it is broken. This is what the",
"Most guides deal with using RAMPS when it comes to",
"mobo, and it's not indicated either. Most guides deal with",
"inductive sensor that they [sell](http://www.gearbest.com/3d-printer-parts/pp_591321.html). It doesn't seem to work,",
"like to know how to connect this to my board,",
"However, I have no idea how I can test if",
"not indicated either. Most guides deal with using RAMPS when",
"an Anet A8 over christmas. When I bought my printer",
"I can test if it is broken. This is what",
"test if it is broken. This is what the wiring",
"wiring in order to hook it up to the A8's",
"broken. This is what the wiring [looks](http://rotjes.bangblog.eu/reddit/DSC_0112.JPG) like and how",
"bought an Anet A8 over christmas. When I bought my",
"like and how it's connected to the [board](http://rotjes.bangblog.eu/reddit/DSC_0113.JPG) I'm not",
"board, if possible. The printer works fine otherwise, so I",
"might be broken. However, I have no idea how I",
"[sell](http://www.gearbest.com/3d-printer-parts/pp_591321.html). It doesn't seem to work, and I think it",
"what the wiring [looks](http://rotjes.bangblog.eu/reddit/DSC_0112.JPG) like and how it's connected to",
"how it's connected to the [board](http://rotjes.bangblog.eu/reddit/DSC_0113.JPG) I'm not sure if",
"from Gearbest, I also bought the inductive sensor that they",
"different one if necessary) How do I get this working?",
"possible. The printer works fine otherwise, so I don't think",
"is broken or anything. For now I've resumed using the",
"to modify the wiring in order to hook it up",
"have no idea what the pinout is on the A8's"
] |
[
"are mount to suck the hot air away from the",
"airflow over the heatsink, but couldn't give me an argument",
"one way better than the other way ? And if",
"than the other way ? And if so, why ?",
"from sourced parts and mounted the hotend cooler to blow",
"argument other than everywhere he saw it was like this:",
"he saw it was like this: all coolers are mount",
"a 3D printer from sourced parts and mounted the hotend",
"he said it's better to reverse the airflow over the",
"the heatsink. Talking to a friend, he said it's better",
"to a friend, he said it's better to reverse the",
"build a 3D printer from sourced parts and mounted the",
"friend, he said it's better to reverse the airflow over",
"the heatsink. Is it one way better than the other",
"3D printer from sourced parts and mounted the hotend cooler",
"this: all coolers are mount to suck the hot air",
"away from the heatsink. Is it one way better than",
"was like this: all coolers are mount to suck the",
"hotend cooler to blow air over the heatsink. Talking to",
"printer from sourced parts and mounted the hotend cooler to",
"I've build a 3D printer from sourced parts and mounted",
"said it's better to reverse the airflow over the heatsink,",
"to blow air over the heatsink. Talking to a friend,",
"me an argument other than everywhere he saw it was",
"it was like this: all coolers are mount to suck",
"the hot air away from the heatsink. Is it one",
"it one way better than the other way ? And",
"heatsink. Is it one way better than the other way",
"everywhere he saw it was like this: all coolers are",
"than everywhere he saw it was like this: all coolers",
"from the heatsink. Is it one way better than the",
"it's better to reverse the airflow over the heatsink, but",
"all coolers are mount to suck the hot air away",
"better to reverse the airflow over the heatsink, but couldn't",
"to suck the hot air away from the heatsink. Is",
"blow air over the heatsink. Talking to a friend, he",
"cooler to blow air over the heatsink. Talking to a",
"saw it was like this: all coolers are mount to",
"the hotend cooler to blow air over the heatsink. Talking",
"couldn't give me an argument other than everywhere he saw",
"and mounted the hotend cooler to blow air over the",
"air away from the heatsink. Is it one way better",
"the airflow over the heatsink, but couldn't give me an",
"reverse the airflow over the heatsink, but couldn't give me",
"a friend, he said it's better to reverse the airflow",
"over the heatsink. Talking to a friend, he said it's",
"heatsink. Talking to a friend, he said it's better to",
"give me an argument other than everywhere he saw it",
"suck the hot air away from the heatsink. Is it",
"mount to suck the hot air away from the heatsink.",
"hot air away from the heatsink. Is it one way",
"an argument other than everywhere he saw it was like",
"way better than the other way ? And if so,",
"to reverse the airflow over the heatsink, but couldn't give",
"heatsink, but couldn't give me an argument other than everywhere",
"but couldn't give me an argument other than everywhere he",
"better than the other way ? And if so, why",
"mounted the hotend cooler to blow air over the heatsink.",
"the heatsink, but couldn't give me an argument other than",
"sourced parts and mounted the hotend cooler to blow air",
"air over the heatsink. Talking to a friend, he said",
"like this: all coolers are mount to suck the hot",
"coolers are mount to suck the hot air away from",
"parts and mounted the hotend cooler to blow air over",
"over the heatsink, but couldn't give me an argument other",
"Talking to a friend, he said it's better to reverse",
"other than everywhere he saw it was like this: all",
"Is it one way better than the other way ?"
] |
[
"to connect the heating element to the power supply. (I",
"the power supply. (I was also told that a ceramic",
"the heating element to the power supply. (I was also",
"(I was also told that a ceramic extruder head was",
"power supply. (I was also told that a ceramic extruder",
"Lead-Free 0.62\" diameter. * 62/36/2 Silver-Bearing Solder, 0.15\" diameter. Is",
"solder to connect the heating element to the power supply.",
"have) I bought two types of silver solider from Radio",
"from Radio Shack: * 96/4 Silver-Bearing Solder, Lead-Free 0.62\" diameter.",
"other to power the heading element of the J-Head extruder?",
"element to the power supply. (I was also told that",
"extruder head was the way to go, but I'm working",
"I was told that I should use silver solder to",
"[this question](https://3dprinting.stackexchange.com/a/3116/37) I was told that I should use silver",
"working with what I have) I bought two types of",
"head was the way to go, but I'm working with",
"In [this question](https://3dprinting.stackexchange.com/a/3116/37) I was told that I should use",
"types of silver solider from Radio Shack: * 96/4 Silver-Bearing",
"of silver solider from Radio Shack: * 96/4 Silver-Bearing Solder,",
"Is there any reason I should use one of these",
"told that I should use silver solder to connect the",
"Silver-Bearing Solder, Lead-Free 0.62\" diameter. * 62/36/2 Silver-Bearing Solder, 0.15\"",
"reason I should use one of these over the other",
"told that a ceramic extruder head was the way to",
"the other to power the heading element of the J-Head",
"way to go, but I'm working with what I have)",
"ceramic extruder head was the way to go, but I'm",
"these over the other to power the heading element of",
"with what I have) I bought two types of silver",
"that a ceramic extruder head was the way to go,",
"silver solder to connect the heating element to the power",
"over the other to power the heading element of the",
"Solder, 0.15\" diameter. Is there any reason I should use",
"Solder, Lead-Free 0.62\" diameter. * 62/36/2 Silver-Bearing Solder, 0.15\" diameter.",
"but I'm working with what I have) I bought two",
"I have) I bought two types of silver solider from",
"I should use one of these over the other to",
"use silver solder to connect the heating element to the",
"there any reason I should use one of these over",
"was also told that a ceramic extruder head was the",
"heating element to the power supply. (I was also told",
"I'm working with what I have) I bought two types",
"go, but I'm working with what I have) I bought",
"supply. (I was also told that a ceramic extruder head",
"* 62/36/2 Silver-Bearing Solder, 0.15\" diameter. Is there any reason",
"0.15\" diameter. Is there any reason I should use one",
"Silver-Bearing Solder, 0.15\" diameter. Is there any reason I should",
"should use silver solder to connect the heating element to",
"the way to go, but I'm working with what I",
"diameter. Is there any reason I should use one of",
"62/36/2 Silver-Bearing Solder, 0.15\" diameter. Is there any reason I",
"solider from Radio Shack: * 96/4 Silver-Bearing Solder, Lead-Free 0.62\"",
"any reason I should use one of these over the",
"I should use silver solder to connect the heating element",
"was the way to go, but I'm working with what",
"* 96/4 Silver-Bearing Solder, Lead-Free 0.62\" diameter. * 62/36/2 Silver-Bearing",
"Radio Shack: * 96/4 Silver-Bearing Solder, Lead-Free 0.62\" diameter. *",
"bought two types of silver solider from Radio Shack: *",
"of these over the other to power the heading element",
"I bought two types of silver solider from Radio Shack:",
"one of these over the other to power the heading",
"question](https://3dprinting.stackexchange.com/a/3116/37) I was told that I should use silver solder",
"Shack: * 96/4 Silver-Bearing Solder, Lead-Free 0.62\" diameter. * 62/36/2",
"what I have) I bought two types of silver solider",
"was told that I should use silver solder to connect",
"a ceramic extruder head was the way to go, but",
"to the power supply. (I was also told that a",
"also told that a ceramic extruder head was the way",
"silver solider from Radio Shack: * 96/4 Silver-Bearing Solder, Lead-Free",
"two types of silver solider from Radio Shack: * 96/4",
"that I should use silver solder to connect the heating",
"should use one of these over the other to power",
"96/4 Silver-Bearing Solder, Lead-Free 0.62\" diameter. * 62/36/2 Silver-Bearing Solder,",
"to go, but I'm working with what I have) I",
"0.62\" diameter. * 62/36/2 Silver-Bearing Solder, 0.15\" diameter. Is there",
"diameter. * 62/36/2 Silver-Bearing Solder, 0.15\" diameter. Is there any",
"use one of these over the other to power the",
"connect the heating element to the power supply. (I was"
] |
[
"16.04.1 LTS Word size of OS: 64-bit Word size of",
"a solid as follows : [](https://i.stack.imgur.com/Qe4nu.png) My problem is, when",
"I sketched on the face of a solid as follows",
"of a solid as follows : [](https://i.stack.imgur.com/Qe4nu.png) My problem is,",
"My problem is, when I use \"Pad a selected sketch\",",
"is, when I use \"Pad a selected sketch\", the solid",
"solid created comprises also the original solid. [](https://i.stack.imgur.com/pHI59.png) It",
"How to prevent it? MyFreeCAD config: ``` OS: Ubuntu 16.04.1",
"comprises also the original solid. [](https://i.stack.imgur.com/pHI59.png) It prevents me,",
"problem is, when I use \"Pad a selected sketch\", the",
"follows : [](https://i.stack.imgur.com/Qe4nu.png) My problem is, when I use \"Pad",
"Word size of OS: 64-bit Word size of FreeCAD: 64-bit",
"``` OS: Ubuntu 16.04.1 LTS Word size of OS: 64-bit",
"size of FreeCAD: 64-bit Version: 0.15.4671 (Git) Branch: releases/FreeCAD-0-15 Hash:",
"Any idea what may be causing this? How to prevent",
"[](https://i.stack.imgur.com/Qe4nu.png) My problem is, when I use \"Pad a selected",
"FreeCAD: 64-bit Version: 0.15.4671 (Git) Branch: releases/FreeCAD-0-15 Hash: 244b3aef360841646cbfe80a1b225c8b39c8380c Python",
"original solid. [](https://i.stack.imgur.com/pHI59.png) It prevents me, for instance, to",
"the solid created comprises also the original solid. [](https://i.stack.imgur.com/pHI59.png)",
"one. Any idea what may be causing this? How to",
"0.15.4671 (Git) Branch: releases/FreeCAD-0-15 Hash: 244b3aef360841646cbfe80a1b225c8b39c8380c Python version: 2.7.11 Qt",
"I use \"Pad a selected sketch\", the solid created comprises",
"OS: 64-bit Word size of FreeCAD: 64-bit Version: 0.15.4671 (Git)",
"get the difference with the first one. Any idea what",
"OS: Ubuntu 16.04.1 LTS Word size of OS: 64-bit Word",
"to get the difference with the first one. Any idea",
"sketched on the face of a solid as follows :",
"(Git) Branch: releases/FreeCAD-0-15 Hash: 244b3aef360841646cbfe80a1b225c8b39c8380c Python version: 2.7.11 Qt version:",
"Hash: 244b3aef360841646cbfe80a1b225c8b39c8380c Python version: 2.7.11 Qt version: 4.8.7 Coin version:",
"Qt version: 4.8.7 Coin version: 4.0.0a OCC version: 6.8.0.oce-0.17 ```",
"use \"Pad a selected sketch\", the solid created comprises also",
"causing this? How to prevent it? MyFreeCAD config: ``` OS:",
"the difference with the first one. Any idea what may",
"as follows : [](https://i.stack.imgur.com/Qe4nu.png) My problem is, when I use",
"Python version: 2.7.11 Qt version: 4.8.7 Coin version: 4.0.0a OCC",
"Under FreeCAD, I sketched on the face of a solid",
"It prevents me, for instance, to get the difference with",
"Version: 0.15.4671 (Git) Branch: releases/FreeCAD-0-15 Hash: 244b3aef360841646cbfe80a1b225c8b39c8380c Python version: 2.7.11",
"the original solid. [](https://i.stack.imgur.com/pHI59.png) It prevents me, for instance,",
"on the face of a solid as follows : [](https://i.stack.imgur.com/Qe4nu.png)",
"the face of a solid as follows : [](https://i.stack.imgur.com/Qe4nu.png) My",
"be causing this? How to prevent it? MyFreeCAD config: ```",
"version: 2.7.11 Qt version: 4.8.7 Coin version: 4.0.0a OCC version:",
"size of OS: 64-bit Word size of FreeCAD: 64-bit Version:",
"me, for instance, to get the difference with the first",
"Ubuntu 16.04.1 LTS Word size of OS: 64-bit Word size",
"LTS Word size of OS: 64-bit Word size of FreeCAD:",
"the first one. Any idea what may be causing this?",
"instance, to get the difference with the first one. Any",
"244b3aef360841646cbfe80a1b225c8b39c8380c Python version: 2.7.11 Qt version: 4.8.7 Coin version: 4.0.0a",
"a selected sketch\", the solid created comprises also the original",
"64-bit Version: 0.15.4671 (Git) Branch: releases/FreeCAD-0-15 Hash: 244b3aef360841646cbfe80a1b225c8b39c8380c Python version:",
"what may be causing this? How to prevent it? MyFreeCAD",
"prevent it? MyFreeCAD config: ``` OS: Ubuntu 16.04.1 LTS Word",
"face of a solid as follows : [](https://i.stack.imgur.com/Qe4nu.png) My problem",
"Word size of FreeCAD: 64-bit Version: 0.15.4671 (Git) Branch: releases/FreeCAD-0-15",
"difference with the first one. Any idea what may be",
"first one. Any idea what may be causing this? How",
"MyFreeCAD config: ``` OS: Ubuntu 16.04.1 LTS Word size of",
"64-bit Word size of FreeCAD: 64-bit Version: 0.15.4671 (Git) Branch:",
"Branch: releases/FreeCAD-0-15 Hash: 244b3aef360841646cbfe80a1b225c8b39c8380c Python version: 2.7.11 Qt version: 4.8.7",
"FreeCAD, I sketched on the face of a solid as",
"with the first one. Any idea what may be causing",
"may be causing this? How to prevent it? MyFreeCAD config:",
"also the original solid. [](https://i.stack.imgur.com/pHI59.png) It prevents me, for",
"to prevent it? MyFreeCAD config: ``` OS: Ubuntu 16.04.1 LTS",
"\"Pad a selected sketch\", the solid created comprises also the",
"solid. [](https://i.stack.imgur.com/pHI59.png) It prevents me, for instance, to get",
"config: ``` OS: Ubuntu 16.04.1 LTS Word size of OS:",
"solid as follows : [](https://i.stack.imgur.com/Qe4nu.png) My problem is, when I",
"when I use \"Pad a selected sketch\", the solid created",
": [](https://i.stack.imgur.com/Qe4nu.png) My problem is, when I use \"Pad a",
"sketch\", the solid created comprises also the original solid. [](https://i.stack.imgur.com/pHI59.png) It prevents",
"2.7.11 Qt version: 4.8.7 Coin version: 4.0.0a OCC version: 6.8.0.oce-0.17",
"releases/FreeCAD-0-15 Hash: 244b3aef360841646cbfe80a1b225c8b39c8380c Python version: 2.7.11 Qt version: 4.8.7 Coin",
"for instance, to get the difference with the first one.",
"idea what may be causing this? How to prevent it?",
"it? MyFreeCAD config: ``` OS: Ubuntu 16.04.1 LTS Word size",
"[](https://i.stack.imgur.com/pHI59.png) It prevents me, for instance, to get the",
"selected sketch\", the solid created comprises also the original solid.",
"of OS: 64-bit Word size of FreeCAD: 64-bit Version: 0.15.4671",
"prevents me, for instance, to get the difference with the",
"of FreeCAD: 64-bit Version: 0.15.4671 (Git) Branch: releases/FreeCAD-0-15 Hash: 244b3aef360841646cbfe80a1b225c8b39c8380c",
"solid](https://i.stack.imgur.com/pHI59.png)](https://i.stack.imgur.com/pHI59.png) It prevents me, for instance, to get the difference"
] |
[
"the job. I've experimented with different temperatures, but, because of",
"print a wheel about 6mm thick to serve as a",
"spokes won't do the job. I've experimented with different temperatures,",
"other words, the wheel doesn't have to be solid, but",
"experimented with different temperatures, but, because of ABS' thermal expansion,",
"because of ABS' thermal expansion, I don't think that will",
"words, the wheel doesn't have to be solid, but spokes",
"be solid, but spokes won't do the job. I've experimented",
"other designs for the interior, but doubt that would be",
"the path that the slicer suggests? (grasping at straws) Thanks",
"I've experimented with different temperatures, but, because of ABS' thermal",
"the interior, but doubt that would be a solution. Has",
"print paths, i.e. actually altering the path that the slicer",
"actually altering the path that the slicer suggests? (grasping at",
"altering the path that the slicer suggests? (grasping at straws)",
"attempting to print a wheel about 6mm thick to serve",
"Flashforge Pro and attempting to print a wheel about 6mm",
"but spokes won't do the job. I've experimented with different",
"putting lots of 2mm holes in the wheel. I've considered",
"I don't think that will solve the problem. Also tried",
"with different temperatures, but, because of ABS' thermal expansion, I",
"tried putting lots of 2mm holes in the wheel. I've",
"about 6mm thick to serve as a platform. In other",
"to be solid, but spokes won't do the job. I've",
"using different print paths, i.e. actually altering the path that",
"path that the slicer suggests? (grasping at straws) Thanks for",
"considered other designs for the interior, but doubt that would",
"won't do the job. I've experimented with different temperatures, but,",
"that the slicer suggests? (grasping at straws) Thanks for your",
"temperatures, but, because of ABS' thermal expansion, I don't think",
"don't think that will solve the problem. Also tried putting",
"in the wheel. I've considered other designs for the interior,",
"Has anyone tried using different print paths, i.e. actually altering",
"doesn't have to be solid, but spokes won't do the",
"would be a solution. Has anyone tried using different print",
"solve the problem. Also tried putting lots of 2mm holes",
"I've considered other designs for the interior, but doubt that",
"wheel. I've considered other designs for the interior, but doubt",
"interior, but doubt that would be a solution. Has anyone",
"designs for the interior, but doubt that would be a",
"anyone tried using different print paths, i.e. actually altering the",
"I'm using a Flashforge Pro and attempting to print a",
"but, because of ABS' thermal expansion, I don't think that",
"thermal expansion, I don't think that will solve the problem.",
"In other words, the wheel doesn't have to be solid,",
"wheel about 6mm thick to serve as a platform. In",
"that would be a solution. Has anyone tried using different",
"a wheel about 6mm thick to serve as a platform.",
"platform. In other words, the wheel doesn't have to be",
"will solve the problem. Also tried putting lots of 2mm",
"the slicer suggests? (grasping at straws) Thanks for your suggestions.",
"problem. Also tried putting lots of 2mm holes in the",
"a Flashforge Pro and attempting to print a wheel about",
"expansion, I don't think that will solve the problem. Also",
"Pro and attempting to print a wheel about 6mm thick",
"wheel doesn't have to be solid, but spokes won't do",
"but doubt that would be a solution. Has anyone tried",
"the wheel doesn't have to be solid, but spokes won't",
"of 2mm holes in the wheel. I've considered other designs",
"the wheel. I've considered other designs for the interior, but",
"be a solution. Has anyone tried using different print paths,",
"2mm holes in the wheel. I've considered other designs for",
"a platform. In other words, the wheel doesn't have to",
"solution. Has anyone tried using different print paths, i.e. actually",
"i.e. actually altering the path that the slicer suggests? (grasping",
"to serve as a platform. In other words, the wheel",
"have to be solid, but spokes won't do the job.",
"to print a wheel about 6mm thick to serve as",
"the problem. Also tried putting lots of 2mm holes in",
"paths, i.e. actually altering the path that the slicer suggests?",
"for the interior, but doubt that would be a solution.",
"job. I've experimented with different temperatures, but, because of ABS'",
"that will solve the problem. Also tried putting lots of",
"Also tried putting lots of 2mm holes in the wheel.",
"ABS' thermal expansion, I don't think that will solve the",
"holes in the wheel. I've considered other designs for the",
"lots of 2mm holes in the wheel. I've considered other",
"doubt that would be a solution. Has anyone tried using",
"thick to serve as a platform. In other words, the",
"solid, but spokes won't do the job. I've experimented with",
"and attempting to print a wheel about 6mm thick to",
"using a Flashforge Pro and attempting to print a wheel",
"think that will solve the problem. Also tried putting lots",
"tried using different print paths, i.e. actually altering the path",
"different print paths, i.e. actually altering the path that the",
"a solution. Has anyone tried using different print paths, i.e.",
"as a platform. In other words, the wheel doesn't have",
"different temperatures, but, because of ABS' thermal expansion, I don't",
"of ABS' thermal expansion, I don't think that will solve",
"do the job. I've experimented with different temperatures, but, because",
"6mm thick to serve as a platform. In other words,",
"serve as a platform. In other words, the wheel doesn't"
] |
[
"following syntax: ``` M42 P4 S255 ``` according to the",
"this programmatically, my host software (Octoprint) is sending an M42",
"M42 command. I am using the following syntax: ``` M42",
"programmatically, my host software (Octoprint) is sending an M42 command.",
"``` M42 P4 S255 ``` according to the pinout in",
"level. Is there firmware-level configuration I need to do as",
"M42 P4 S255 ``` according to the pinout in the",
"need to do as well, or is my syntax/pin number",
"of the RAMPS GPIOs to control an external device that",
"requires a 5V low-current logic level signal from Marlin. In",
"sending an M42 command. I am using the following syntax:",
"to a logic HIGH level. Is there firmware-level configuration I",
"my host software (Octoprint) is sending an M42 command. I",
"to control an external device that requires a 5V low-current",
"I'm trying to use one of the RAMPS GPIOs to",
"according to the pinout in the following image: [](https://i.stack.imgur.com/TRInv.png)",
"order to do this programmatically, my host software (Octoprint) is",
"HIGH level. Is there firmware-level configuration I need to do",
"here](https://i.stack.imgur.com/TRInv.png)](https://i.stack.imgur.com/TRInv.png) However, the pin appears to not be driven to",
"image: [](https://i.stack.imgur.com/TRInv.png) However, the pin appears to",
"to the pinout in the following image: [](https://i.stack.imgur.com/TRInv.png) However, the pin appears to not be",
"the following image: [](https://i.stack.imgur.com/TRInv.png) However, the pin",
"is sending an M42 command. I am using the following",
"the pin appears to not be driven to a logic",
"appears to not be driven to a logic HIGH level.",
"configuration I need to do as well, or is my",
"command. I am using the following syntax: ``` M42 P4",
"firmware-level configuration I need to do as well, or is",
"the RAMPS GPIOs to control an external device that requires",
"trying to use one of the RAMPS GPIOs to control",
"do this programmatically, my host software (Octoprint) is sending an",
"one of the RAMPS GPIOs to control an external device",
"In order to do this programmatically, my host software (Octoprint)",
"am using the following syntax: ``` M42 P4 S255 ```",
"a logic HIGH level. Is there firmware-level configuration I need",
"Marlin. In order to do this programmatically, my host software",
"RAMPS GPIOs to control an external device that requires a",
"to do as well, or is my syntax/pin number incorrect?",
"the following syntax: ``` M42 P4 S255 ``` according to",
"logic level signal from Marlin. In order to do this",
"signal from Marlin. In order to do this programmatically, my",
"(Octoprint) is sending an M42 command. I am using the",
"following image: [](https://i.stack.imgur.com/TRInv.png) However, the pin appears",
"driven to a logic HIGH level. Is there firmware-level configuration",
"Is there firmware-level configuration I need to do as well,",
"an M42 command. I am using the following syntax: ```",
"However, the pin appears to not be driven to a",
"software (Octoprint) is sending an M42 command. I am using",
"device that requires a 5V low-current logic level signal from",
"that requires a 5V low-current logic level signal from Marlin.",
"level signal from Marlin. In order to do this programmatically,",
"control an external device that requires a 5V low-current logic",
"I need to do as well, or is my syntax/pin",
"GPIOs to control an external device that requires a 5V",
"low-current logic level signal from Marlin. In order to do",
"description here](https://i.stack.imgur.com/TRInv.png)](https://i.stack.imgur.com/TRInv.png) However, the pin appears to not be driven",
"external device that requires a 5V low-current logic level signal",
"P4 S255 ``` according to the pinout in the following",
"pinout in the following image: [](https://i.stack.imgur.com/TRInv.png) However,",
"use one of the RAMPS GPIOs to control an external",
"to do this programmatically, my host software (Octoprint) is sending",
"to use one of the RAMPS GPIOs to control an",
"``` according to the pinout in the following image: [](https://i.stack.imgur.com/TRInv.png) However, the pin appears to not",
"5V low-current logic level signal from Marlin. In order to",
"be driven to a logic HIGH level. Is there firmware-level",
"a 5V low-current logic level signal from Marlin. In order",
"not be driven to a logic HIGH level. Is there",
"in the following image: [](https://i.stack.imgur.com/TRInv.png) However, the"
] |
[
"a Replicator 2, but the resolution does not seem to",
"resolution does not seem to come close to what I",
"gear down a servo even further. I notice that the",
"new gears that come close to the resolution and strength",
"how I can create nylon or other hard material parts",
"the gears are made of nylon, and I want to",
"need. Any suggestions on how I can create nylon or",
"resolution and strength of the existing gears. I have a",
"can create nylon or other hard material parts that might",
"gears are made of nylon, and I want to create",
"I notice that the majority of the gears are made",
"that the majority of the gears are made of nylon,",
"to gear down a servo even further. I notice that",
"are made of nylon, and I want to create new",
"to create new gears that come close to the resolution",
"come close to the resolution and strength of the existing",
"down a servo even further. I notice that the majority",
"have a Replicator 2, but the resolution does not seem",
"Replicator 2, but the resolution does not seem to come",
"does not seem to come close to what I need.",
"2, but the resolution does not seem to come close",
"what I need. Any suggestions on how I can create",
"Any suggestions on how I can create nylon or other",
"create nylon or other hard material parts that might work?",
"trying to gear down a servo even further. I notice",
"on how I can create nylon or other hard material",
"I can create nylon or other hard material parts that",
"to the resolution and strength of the existing gears. I",
"to come close to what I need. Any suggestions on",
"suggestions on how I can create nylon or other hard",
"I have a Replicator 2, but the resolution does not",
"even further. I notice that the majority of the gears",
"a servo even further. I notice that the majority of",
"servo even further. I notice that the majority of the",
"further. I notice that the majority of the gears are",
"but the resolution does not seem to come close to",
"majority of the gears are made of nylon, and I",
"strength of the existing gears. I have a Replicator 2,",
"of the existing gears. I have a Replicator 2, but",
"that come close to the resolution and strength of the",
"of nylon, and I want to create new gears that",
"of the gears are made of nylon, and I want",
"I'm trying to gear down a servo even further. I",
"nylon, and I want to create new gears that come",
"I want to create new gears that come close to",
"I need. Any suggestions on how I can create nylon",
"and I want to create new gears that come close",
"close to the resolution and strength of the existing gears.",
"gears. I have a Replicator 2, but the resolution does",
"come close to what I need. Any suggestions on how",
"existing gears. I have a Replicator 2, but the resolution",
"the resolution does not seem to come close to what",
"and strength of the existing gears. I have a Replicator",
"notice that the majority of the gears are made of",
"to what I need. Any suggestions on how I can",
"close to what I need. Any suggestions on how I",
"the resolution and strength of the existing gears. I have",
"create new gears that come close to the resolution and",
"the existing gears. I have a Replicator 2, but the",
"seem to come close to what I need. Any suggestions",
"want to create new gears that come close to the",
"made of nylon, and I want to create new gears",
"the majority of the gears are made of nylon, and",
"not seem to come close to what I need. Any",
"gears that come close to the resolution and strength of"
] |
[
"to their original curvy shape, making them harder to route",
"harder to route properly. Is there a way to straighten",
"spring back to their original curvy shape, making them harder",
"PTFE tubes are typically delivered coiled up. And because they",
"up. And because they are quite stiff, they always want",
"And because they are quite stiff, they always want to",
"to route properly. Is there a way to straighten them",
"stiff, they always want to spring back to their original",
"they always want to spring back to their original curvy",
"they are quite stiff, they always want to spring back",
"quite stiff, they always want to spring back to their",
"back to their original curvy shape, making them harder to",
"are quite stiff, they always want to spring back to",
"shape, making them harder to route properly. Is there a",
"their original curvy shape, making them harder to route properly.",
"curvy shape, making them harder to route properly. Is there",
"always want to spring back to their original curvy shape,",
"making them harder to route properly. Is there a way",
"are typically delivered coiled up. And because they are quite",
"want to spring back to their original curvy shape, making",
"delivered coiled up. And because they are quite stiff, they",
"to spring back to their original curvy shape, making them",
"them harder to route properly. Is there a way to",
"tubes are typically delivered coiled up. And because they are",
"typically delivered coiled up. And because they are quite stiff,",
"original curvy shape, making them harder to route properly. Is",
"route properly. Is there a way to straighten them out?",
"coiled up. And because they are quite stiff, they always",
"because they are quite stiff, they always want to spring"
] |
[
"main parts of the printer came assembled I am unsure",
"be clean, in working order. And for number 4 I",
"was first putting the filament in and using the extruder",
"I think its new so it should be clean, in",
"and am having trouble honing in on why the extruder",
"I was first putting the filament in and using the",
"am working with ABS so I have the hotend heated",
"first. I assume that if it came pre-assembled then it",
"causes and am hoping for some direction on which is",
"possible causes and am hoping for some direction on which",
"wiring and mounting these pieces the only thing I did",
"came assembled (see below) so I am not sure what",
"was cut a clean edge on the Bowden tube and",
"and am hoping for some direction on which is most",
"thorough the Bowden tube. But when I tried using the",
"shown in the picture. [](https://i.stack.imgur.com/NCO1Y.png) Not shown in the",
"3. Replace your Bowden Tubes 4. Tweak slicer settings For",
"print head completely assembled as shown in the picture. [](https://i.stack.imgur.com/VJV5E.png) So aside from wiring and mounting these pieces",
"of where to start taking things apart. I have a",
"assembled I am unsure of where to start taking things",
"start there. Symptoms: --------- Extruder clicking. The extruder makes a",
"these pieces the only thing I did was cut a",
"between the extruder moving and the plastic coming out of",
"read to try ------------------------- Again this a kit printer and",
"Not shown in the picture it also had the Bowden",
"cold pull 2. Take apart the extruder and realign the",
"For the first 3 I think its new so it",
"picture. [](https://i.stack.imgur.com/VJV5E.png) So aside from wiring and mounting these",
"put what was in the manual except for the temperatures",
"But when I tried using the manual controls to extrude",
"small amount of filament it seems to be fine, just",
"most likely done correctly. 1. Clean out the hotend, do",
"PLA or ABS printer) Assembly: --------- The printer being a",
"the plastic coming out of the hotend. Things I have",
"temperatures (because the settings shown in the manual were for",
"at first. I assume that if it came pre-assembled then",
"ABS so I have the hotend heated to 250 degrees",
"extrude a small amount of filament it seems to be",
"and mounting these pieces the only thing I did was",
"your Bowden Tubes 4. Tweak slicer settings For the first",
"multitude of possible causes and am hoping for some direction",
"of ABS. Being the main parts of the printer came",
"why the extruder is struggling with my first spool of",
"moving and the plastic coming out of the hotend. Things",
"when I tried using the manual controls to extrude a",
"the first 3 I think its new so it should",
"did was cut a clean edge on the Bowden tube",
"hotend. Things I have read to try ------------------------- Again this",
"some direction on which is most likely so I can",
"the extruder is struggling with my first spool of ABS.",
"realign the driving cog, check for shaft slippage 3. Replace",
"have read to try ------------------------- Again this a kit printer",
"Extruder clicking. The extruder makes a low grinding noise every",
"the extruder and realign the driving cog, check for shaft",
"correctly. 1. Clean out the hotend, do a cold pull",
"for PLA but it is a PLA or ABS printer)",
"trouble when I was first putting the filament in and",
"it is a PLA or ABS printer) Assembly: --------- The",
"hotend, do a cold pull 2. Take apart the extruder",
"assembled as shown in the picture. [](https://i.stack.imgur.com/NCO1Y.png) Not shown",
"parts of the printer came assembled I am unsure of",
"then it is most likely done correctly. 1. Clean out",
"Bowden tubes in place. It also came with the extruder",
"C. The extruder had no trouble when I was first",
"kit printer and the involved components came assembled (see below)",
"slippage 3. Replace your Bowden Tubes 4. Tweak slicer settings",
"with the print head completely assembled as shown in the",
"just a small time delay between the extruder moving and",
"to be fine, just a small time delay between the",
"I am unsure of where to start taking things apart.",
"a cold pull 2. Take apart the extruder and realign",
"the only thing I did was cut a clean edge",
"a PLA or ABS printer) Assembly: --------- The printer being",
"spool of ABS. Being the main parts of the printer",
"extrude more than 1mm of filament using the manual controls.",
"seems to be fine, just a small time delay between",
"a multitude of possible causes and am hoping for some",
"with the extruder assembled as shown in the picture. [](https://i.stack.imgur.com/VJV5E.png) So",
"am unsure of where to start taking things apart. I",
"working with ABS so I have the hotend heated to",
"settings shown in the manual were for PLA but it",
"what was in the manual except for the temperatures (because",
"the settings shown in the manual were for PLA but",
"be fine, just a small time delay between the extruder",
"was in the manual except for the temperatures (because the",
"The printer being a kit came with the print head",
"Head-hotend](https://i.stack.imgur.com/NCO1Y.png)](https://i.stack.imgur.com/NCO1Y.png) Not shown in the picture it also had the",
"manual controls. Again I am working with ABS so I",
"honing in on why the extruder is struggling with my",
"components came assembled (see below) so I am not sure",
"ABS. Being the main parts of the printer came assembled",
"low grinding noise every time it tries to extrude more",
"manual except for the temperatures (because the settings shown in",
"tried using the manual controls to extrude a small amount",
"extruder moving and the plastic coming out of the hotend.",
"Clean out the hotend, do a cold pull 2. Take",
"picture. [](https://i.stack.imgur.com/NCO1Y.png) Not shown in the picture it also",
"its new so it should be clean, in working order.",
"it thorough the Bowden tube. But when I tried using",
"Again this a kit printer and the involved components came",
"the temperatures (because the settings shown in the manual were",
"I can start there. Symptoms: --------- Extruder clicking. The extruder",
"head completely assembled as shown in the picture. [](https://i.stack.imgur.com/NCO1Y.png)",
"shown in the manual were for PLA but it is",
"can start there. Symptoms: --------- Extruder clicking. The extruder makes",
"The extruder had no trouble when I was first putting",
"in on why the extruder is struggling with my first",
"and using the extruder to push it thorough the Bowden",
"2. Take apart the extruder and realign the driving cog,",
"printer) Assembly: --------- The printer being a kit came with",
"being a kit came with the print head completely assembled",
"Again I am working with ABS so I have the",
"look at first. I assume that if it came pre-assembled",
"Tweak slicer settings For the first 3 I think its",
"the hotend. Things I have read to try ------------------------- Again",
"am not sure what I should look at first. I",
"done correctly. 1. Clean out the hotend, do a cold",
"a GeeeTech Rostock 301 mixer head delta printer and am",
"small time delay between the extruder moving and the plastic",
"that if it came pre-assembled then it is most likely",
"so I can start there. Symptoms: --------- Extruder clicking. The",
"taking things apart. I have a read a multitude of",
"out of the hotend. Things I have read to try",
"of filament using the manual controls. Again I am working",
"4. Tweak slicer settings For the first 3 I think",
"the manual controls. Again I am working with ABS so",
"and realign the driving cog, check for shaft slippage 3.",
"makes a low grinding noise every time it tries to",
"of possible causes and am hoping for some direction on",
"except for the temperatures (because the settings shown in the",
"--------- Extruder clicking. The extruder makes a low grinding noise",
"I put what was in the manual except for the",
"printer came assembled I am unsure of where to start",
"for the temperatures (because the settings shown in the manual",
"extruder](https://i.stack.imgur.com/VJV5E.png)](https://i.stack.imgur.com/VJV5E.png) So aside from wiring and mounting these pieces the",
"It also came with the extruder assembled as shown in",
"amount of filament it seems to be fine, just a",
"in the picture. [](https://i.stack.imgur.com/NCO1Y.png) Not shown in the picture",
"the manual were for PLA but it is a PLA",
"and the involved components came assembled (see below) so I",
"to try ------------------------- Again this a kit printer and the",
"filament using the manual controls. Again I am working with",
"tube. But when I tried using the manual controls to",
"in working order. And for number 4 I put what",
"trouble honing in on why the extruder is struggling with",
"only thing I did was cut a clean edge on",
"sure what I should look at first. I assume that",
"to 250 degrees C. The extruder had no trouble when",
"hotend heated to 250 degrees C. The extruder had no",
"also had the Bowden tubes in place. It also came",
"out the hotend, do a cold pull 2. Take apart",
"Bowden tube. But when I tried using the manual controls",
"I did was cut a clean edge on the Bowden",
"the extruder assembled as shown in the picture. [](https://i.stack.imgur.com/VJV5E.png)",
"delta printer and am having trouble honing in on why",
"is a PLA or ABS printer) Assembly: --------- The printer",
"the involved components came assembled (see below) so I am",
"putting the filament in and using the extruder to push",
"a read a multitude of possible causes and am hoping",
"PLA but it is a PLA or ABS printer) Assembly:",
"for shaft slippage 3. Replace your Bowden Tubes 4. Tweak",
"using the manual controls to extrude a small amount of",
"the manual controls to extrude a small amount of filament",
"have a read a multitude of possible causes and am",
"number 4 I put what was in the manual except",
"a small time delay between the extruder moving and the",
"clicking. The extruder makes a low grinding noise every time",
"apart the extruder and realign the driving cog, check for",
"printer being a kit came with the print head completely",
"the filament in and using the extruder to push it",
"apart. I have a read a multitude of possible causes",
"there. Symptoms: --------- Extruder clicking. The extruder makes a low",
"to extrude a small amount of filament it seems to",
"things apart. I have a read a multitude of possible",
"no trouble when I was first putting the filament in",
"a clean edge on the Bowden tube and connect that",
"the hotend, do a cold pull 2. Take apart the",
"cog, check for shaft slippage 3. Replace your Bowden Tubes",
"came with the extruder assembled as shown in the picture.",
"aside from wiring and mounting these pieces the only thing",
"order. And for number 4 I put what was in",
"plastic coming out of the hotend. Things I have read",
"I tried using the manual controls to extrude a small",
"of filament it seems to be fine, just a small",
"I am working with ABS so I have the hotend",
"not sure what I should look at first. I assume",
"with ABS so I have the hotend heated to 250",
"[](https://i.stack.imgur.com/NCO1Y.png) Not shown in the picture it also had",
"likely done correctly. 1. Clean out the hotend, do a",
"of the hotend. Things I have read to try -------------------------",
"had the Bowden tubes in place. It also came with",
"assembled as shown in the picture. [](https://i.stack.imgur.com/VJV5E.png) So aside",
"coming out of the hotend. Things I have read to",
"most likely so I can start there. Symptoms: --------- Extruder",
"clean, in working order. And for number 4 I put",
"shaft slippage 3. Replace your Bowden Tubes 4. Tweak slicer",
"it should be clean, in working order. And for number",
"first 3 I think its new so it should be",
"settings For the first 3 I think its new so",
"working order. And for number 4 I put what was",
"of the printer came assembled I am unsure of where",
"mixer head delta printer and am having trouble honing in",
"try ------------------------- Again this a kit printer and the involved",
"--------- The printer being a kit came with the print",
"Bowden Tubes 4. Tweak slicer settings For the first 3",
"I have read to try ------------------------- Again this a kit",
"in the manual except for the temperatures (because the settings",
"more than 1mm of filament using the manual controls. Again",
"this a kit printer and the involved components came assembled",
"filament in and using the extruder to push it thorough",
"(because the settings shown in the manual were for PLA",
"extruder is struggling with my first spool of ABS. Being",
"am hoping for some direction on which is most likely",
"GeeeTech Rostock 301 mixer head delta printer and am having",
"ABS printer) Assembly: --------- The printer being a kit came",
"likely so I can start there. Symptoms: --------- Extruder clicking.",
"tries to extrude more than 1mm of filament using the",
"a low grinding noise every time it tries to extrude",
"think its new so it should be clean, in working",
"as shown in the picture. [](https://i.stack.imgur.com/VJV5E.png) So aside from",
"a kit printer and the involved components came assembled (see",
"read a multitude of possible causes and am hoping for",
"assembled (see below) so I am not sure what I",
"assume that if it came pre-assembled then it is most",
"on the Bowden tube and connect that to the extruder.",
"should look at first. I assume that if it came",
"the printer came assembled I am unsure of where to",
"is most likely so I can start there. Symptoms: ---------",
"noise every time it tries to extrude more than 1mm",
"tubes in place. It also came with the extruder assembled",
"in place. It also came with the extruder assembled as",
"got a GeeeTech Rostock 301 mixer head delta printer and",
"in the manual were for PLA but it is a",
"the Bowden tube. But when I tried using the manual",
"4 I put what was in the manual except for",
"the extruder to push it thorough the Bowden tube. But",
"is struggling with my first spool of ABS. Being the",
"but it is a PLA or ABS printer) Assembly: ---------",
"place. It also came with the extruder assembled as shown",
"hoping for some direction on which is most likely so",
"which is most likely so I can start there. Symptoms:",
"from wiring and mounting these pieces the only thing I",
"250 degrees C. The extruder had no trouble when I",
"the Bowden tubes in place. It also came with the",
"3 I think its new so it should be clean,",
"time delay between the extruder moving and the plastic coming",
"slicer settings For the first 3 I think its new",
"the extruder moving and the plastic coming out of the",
"the print head completely assembled as shown in the picture.",
"So aside from wiring and mounting these pieces the only",
"shown in the picture it also had the Bowden tubes",
"the picture. [](https://i.stack.imgur.com/NCO1Y.png) Not shown in the picture it",
"shown in the picture. [](https://i.stack.imgur.com/VJV5E.png) So aside from wiring",
"as shown in the picture. [](https://i.stack.imgur.com/NCO1Y.png) Not shown in",
"Things I have read to try ------------------------- Again this a",
"to extrude more than 1mm of filament using the manual",
"in the picture it also had the Bowden tubes in",
"driving cog, check for shaft slippage 3. Replace your Bowden",
"what I should look at first. I assume that if",
"or ABS printer) Assembly: --------- The printer being a kit",
"first putting the filament in and using the extruder to",
"came pre-assembled then it is most likely done correctly. 1.",
"came with the print head completely assembled as shown in",
"the picture. [](https://i.stack.imgur.com/VJV5E.png) So aside from wiring and mounting",
"for some direction on which is most likely so I",
"it seems to be fine, just a small time delay",
"I have a read a multitude of possible causes and",
"should be clean, in working order. And for number 4",
"printer and the involved components came assembled (see below) so",
"the main parts of the printer came assembled I am",
"1. Clean out the hotend, do a cold pull 2.",
"check for shaft slippage 3. Replace your Bowden Tubes 4.",
"Being the main parts of the printer came assembled I",
"push it thorough the Bowden tube. But when I tried",
"also came with the extruder assembled as shown in the",
"so I am not sure what I should look at",
"direction on which is most likely so I can start",
"with my first spool of ABS. Being the main parts",
"it is most likely done correctly. 1. Clean out the",
"on why the extruder is struggling with my first spool",
"my first spool of ABS. Being the main parts of",
"301 mixer head delta printer and am having trouble honing",
"the manual except for the temperatures (because the settings shown",
"it tries to extrude more than 1mm of filament using",
"the driving cog, check for shaft slippage 3. Replace your",
"a kit came with the print head completely assembled as",
"so I have the hotend heated to 250 degrees C.",
"fine, just a small time delay between the extruder moving",
"The extruder makes a low grinding noise every time it",
"grinding noise every time it tries to extrude more than",
"delay between the extruder moving and the plastic coming out",
"completely assembled as shown in the picture. [](https://i.stack.imgur.com/NCO1Y.png) Not",
"than 1mm of filament using the manual controls. Again I",
"edge on the Bowden tube and connect that to the",
"manual controls to extrude a small amount of filament it",
"am having trouble honing in on why the extruder is",
"if it came pre-assembled then it is most likely done",
"do a cold pull 2. Take apart the extruder and",
"kit came with the print head completely assembled as shown",
"clean edge on the Bowden tube and connect that to",
"and the plastic coming out of the hotend. Things I",
"using the extruder to push it thorough the Bowden tube.",
"Tubes 4. Tweak slicer settings For the first 3 I",
"cut a clean edge on the Bowden tube and connect",
"were for PLA but it is a PLA or ABS",
"the hotend heated to 250 degrees C. The extruder had",
"extruder makes a low grinding noise every time it tries",
"I assume that if it came pre-assembled then it is",
"time it tries to extrude more than 1mm of filament",
"Replace your Bowden Tubes 4. Tweak slicer settings For the",
"it also had the Bowden tubes in place. It also",
"thing I did was cut a clean edge on the",
"struggling with my first spool of ABS. Being the main",
"new so it should be clean, in working order. And",
"involved components came assembled (see below) so I am not",
"controls. Again I am working with ABS so I have",
"in the picture. [](https://i.stack.imgur.com/VJV5E.png) So aside from wiring and",
"extruder and realign the driving cog, check for shaft slippage",
"Rostock 301 mixer head delta printer and am having trouble",
"just got a GeeeTech Rostock 301 mixer head delta printer",
"unsure of where to start taking things apart. I have",
"below) so I am not sure what I should look",
"I just got a GeeeTech Rostock 301 mixer head delta",
"for number 4 I put what was in the manual",
"to push it thorough the Bowden tube. But when I",
"having trouble honing in on why the extruder is struggling",
"------------------------- Again this a kit printer and the involved components",
"I have the hotend heated to 250 degrees C. The",
"have the hotend heated to 250 degrees C. The extruder",
"1mm of filament using the manual controls. Again I am",
"Symptoms: --------- Extruder clicking. The extruder makes a low grinding",
"degrees C. The extruder had no trouble when I was",
"it came pre-assembled then it is most likely done correctly.",
"manual were for PLA but it is a PLA or",
"came assembled I am unsure of where to start taking",
"start taking things apart. I have a read a multitude",
"filament it seems to be fine, just a small time",
"extruder had no trouble when I was first putting the",
"the picture it also had the Bowden tubes in place.",
"pre-assembled then it is most likely done correctly. 1. Clean"
] |
[
"Degree Celcius. **Which kind of isolation products are suitable to",
"Ultimaker Original+. One problem is a missing resistor isolation. The",
"missing resistor isolation. The Ultimaker Original+ prints with up to",
"Ultimaker Original+ prints with up to 260 Degree Celcius. **Which",
"problem is a missing resistor isolation. The Ultimaker Original+ prints",
"products are suitable to resist the heat and are fitting",
"are trying to repair an Ultimaker Original+. One problem is",
"kind of isolation products are suitable to resist the heat",
"trying to repair an Ultimaker Original+. One problem is a",
"repair an Ultimaker Original+. One problem is a missing resistor",
"the heat and are fitting on the thin wires of",
"The Ultimaker Original+ prints with up to 260 Degree Celcius.",
"suitable to resist the heat and are fitting on the",
"and are fitting on the thin wires of the thermistor?**",
"up to 260 Degree Celcius. **Which kind of isolation products",
"isolation products are suitable to resist the heat and are",
"heat and are fitting on the thin wires of the",
"260 Degree Celcius. **Which kind of isolation products are suitable",
"prints with up to 260 Degree Celcius. **Which kind of",
"to resist the heat and are fitting on the thin",
"resistor isolation. The Ultimaker Original+ prints with up to 260",
"Celcius. **Which kind of isolation products are suitable to resist",
"to 260 Degree Celcius. **Which kind of isolation products are",
"resist the heat and are fitting on the thin wires",
"with up to 260 Degree Celcius. **Which kind of isolation",
"Original+. One problem is a missing resistor isolation. The Ultimaker",
"an Ultimaker Original+. One problem is a missing resistor isolation.",
"a missing resistor isolation. The Ultimaker Original+ prints with up",
"We are trying to repair an Ultimaker Original+. One problem",
"are suitable to resist the heat and are fitting on",
"isolation. The Ultimaker Original+ prints with up to 260 Degree",
"**Which kind of isolation products are suitable to resist the",
"to repair an Ultimaker Original+. One problem is a missing",
"One problem is a missing resistor isolation. The Ultimaker Original+",
"of isolation products are suitable to resist the heat and",
"is a missing resistor isolation. The Ultimaker Original+ prints with",
"Original+ prints with up to 260 Degree Celcius. **Which kind"
] |
[
"a smooth transition. When I try to push my 1.75",
"filament from spool to extruder, through a path which contains",
"to make it a smooth transition. When I try to",
"it's not designed to take a tube. I can't manage",
"That's the end that contains the screw thread, and it's",
"my 1.75 mm filament through, it will often get stuck",
"middle as follows: `[spool] --- |#= --- =#| --- [extruder]`",
"through, it will often get stuck there. After it's through,",
"have no problem with it anymore. Is there a trick",
"follows: `[spool] --- |#= --- =#| --- [extruder]` So I",
"no problem with it anymore. Is there a trick to",
"(`---=#|`) and not just to the front (`---|#=`). That's the",
"have to connect a tube to the *back* of a",
"I can't manage to make it a smooth transition. When",
"creating a reverse Bowden setup to guide my filament from",
"I'm creating a reverse Bowden setup to guide my filament",
"a reverse Bowden setup to guide my filament from spool",
"extruder, through a path which contains two [couplers](http://amzn.eu/almYaNi) in the",
"After it's through, the extruder seems to have no problem",
"the middle as follows: `[spool] --- |#= --- =#| ---",
"front (`---|#=`). That's the end that contains the screw thread,",
"and it's not designed to take a tube. I can't",
"can't manage to make it a smooth transition. When I",
"tube to the *back* of a coupler (`---=#|`) and not",
"a coupler (`---=#|`) and not just to the front (`---|#=`).",
"mm filament through, it will often get stuck there. After",
"I try to push my 1.75 mm filament through, it",
"a tube to the *back* of a coupler (`---=#|`) and",
"setup to guide my filament from spool to extruder, through",
"contains two [couplers](http://amzn.eu/almYaNi) in the middle as follows: `[spool] ---",
"[extruder]` So I have to connect a tube to the",
"a path which contains two [couplers](http://amzn.eu/almYaNi) in the middle as",
"there. After it's through, the extruder seems to have no",
"take a tube. I can't manage to make it a",
"the *back* of a coupler (`---=#|`) and not just to",
"not designed to take a tube. I can't manage to",
"seems to have no problem with it anymore. Is there",
"will often get stuck there. After it's through, the extruder",
"screw thread, and it's not designed to take a tube.",
"filament through, it will often get stuck there. After it's",
"through, the extruder seems to have no problem with it",
"with it anymore. Is there a trick to making this",
"the end that contains the screw thread, and it's not",
"through a path which contains two [couplers](http://amzn.eu/almYaNi) in the middle",
"transition. When I try to push my 1.75 mm filament",
"connect a tube to the *back* of a coupler (`---=#|`)",
"often get stuck there. After it's through, the extruder seems",
"from spool to extruder, through a path which contains two",
"and not just to the front (`---|#=`). That's the end",
"guide my filament from spool to extruder, through a path",
"a tube. I can't manage to make it a smooth",
"tube. I can't manage to make it a smooth transition.",
"stuck there. After it's through, the extruder seems to have",
"So I have to connect a tube to the *back*",
"the extruder seems to have no problem with it anymore.",
"to push my 1.75 mm filament through, it will often",
"[couplers](http://amzn.eu/almYaNi) in the middle as follows: `[spool] --- |#= ---",
"manage to make it a smooth transition. When I try",
"not just to the front (`---|#=`). That's the end that",
"to have no problem with it anymore. Is there a",
"Is there a trick to making this a smooth transition?",
"try to push my 1.75 mm filament through, it will",
"spool to extruder, through a path which contains two [couplers](http://amzn.eu/almYaNi)",
"Bowden setup to guide my filament from spool to extruder,",
"make it a smooth transition. When I try to push",
"path which contains two [couplers](http://amzn.eu/almYaNi) in the middle as follows:",
"get stuck there. After it's through, the extruder seems to",
"=#| --- [extruder]` So I have to connect a tube",
"it will often get stuck there. After it's through, the",
"thread, and it's not designed to take a tube. I",
"extruder seems to have no problem with it anymore. Is",
"in the middle as follows: `[spool] --- |#= --- =#|",
"end that contains the screw thread, and it's not designed",
"--- =#| --- [extruder]` So I have to connect a",
"it a smooth transition. When I try to push my",
"to connect a tube to the *back* of a coupler",
"|#= --- =#| --- [extruder]` So I have to connect",
"which contains two [couplers](http://amzn.eu/almYaNi) in the middle as follows: `[spool]",
"as follows: `[spool] --- |#= --- =#| --- [extruder]` So",
"to guide my filament from spool to extruder, through a",
"the screw thread, and it's not designed to take a",
"anymore. Is there a trick to making this a smooth",
"reverse Bowden setup to guide my filament from spool to",
"`[spool] --- |#= --- =#| --- [extruder]` So I have",
"that contains the screw thread, and it's not designed to",
"to the *back* of a coupler (`---=#|`) and not just",
"it's through, the extruder seems to have no problem with",
"--- [extruder]` So I have to connect a tube to",
"smooth transition. When I try to push my 1.75 mm",
"(`---|#=`). That's the end that contains the screw thread, and",
"*back* of a coupler (`---=#|`) and not just to the",
"coupler (`---=#|`) and not just to the front (`---|#=`). That's",
"push my 1.75 mm filament through, it will often get",
"my filament from spool to extruder, through a path which",
"to take a tube. I can't manage to make it",
"When I try to push my 1.75 mm filament through,",
"I have to connect a tube to the *back* of",
"contains the screw thread, and it's not designed to take",
"two [couplers](http://amzn.eu/almYaNi) in the middle as follows: `[spool] --- |#=",
"designed to take a tube. I can't manage to make",
"--- |#= --- =#| --- [extruder]` So I have to",
"it anymore. Is there a trick to making this a",
"to the front (`---|#=`). That's the end that contains the",
"just to the front (`---|#=`). That's the end that contains",
"to extruder, through a path which contains two [couplers](http://amzn.eu/almYaNi) in",
"1.75 mm filament through, it will often get stuck there.",
"the front (`---|#=`). That's the end that contains the screw",
"problem with it anymore. Is there a trick to making",
"of a coupler (`---=#|`) and not just to the front"
] |
[
"made the strongest possible, what slicer settings should be used?",
"other % infill? * Thin layer height vs thick layer",
"* 3-5 shells vs all shells, no infill? * 100%",
"strongest possible, what slicer settings should be used? * 3-5",
"* Thin layer height vs thick layer height? * Any",
"possible, what slicer settings should be used? * 3-5 shells",
"100% infill vs some other % infill? * Thin layer",
"height vs thick layer height? * Any other relevant settings?",
"layer height vs thick layer height? * Any other relevant",
"If a part is wanted to be made the strongest",
"settings should be used? * 3-5 shells vs all shells,",
"some other % infill? * Thin layer height vs thick",
"infill? * Thin layer height vs thick layer height? *",
"shells vs all shells, no infill? * 100% infill vs",
"Thin layer height vs thick layer height? * Any other",
"should be used? * 3-5 shells vs all shells, no",
"wanted to be made the strongest possible, what slicer settings",
"vs all shells, no infill? * 100% infill vs some",
"the strongest possible, what slicer settings should be used? *",
"all shells, no infill? * 100% infill vs some other",
"to be made the strongest possible, what slicer settings should",
"be used? * 3-5 shells vs all shells, no infill?",
"3-5 shells vs all shells, no infill? * 100% infill",
"be made the strongest possible, what slicer settings should be",
"a part is wanted to be made the strongest possible,",
"infill? * 100% infill vs some other % infill? *",
"used? * 3-5 shells vs all shells, no infill? *",
"% infill? * Thin layer height vs thick layer height?",
"is wanted to be made the strongest possible, what slicer",
"* 100% infill vs some other % infill? * Thin",
"infill vs some other % infill? * Thin layer height",
"no infill? * 100% infill vs some other % infill?",
"shells, no infill? * 100% infill vs some other %",
"vs some other % infill? * Thin layer height vs",
"what slicer settings should be used? * 3-5 shells vs",
"part is wanted to be made the strongest possible, what",
"slicer settings should be used? * 3-5 shells vs all"
] |
[
"or; * Any other electronic part(s)? Will all or some",
"it harm my: * RAMPS; * Arduino Mega; * Stepper",
"If I *accidentally* reverse the polarity of my power supply",
"power supply to the RAMPS board, what *exactly* will be",
"electronic part(s)? Will all or some of them be permanently",
"my power supply to the RAMPS board, what *exactly* will",
"will be damaged? Will it harm my: * RAMPS; *",
"other electronic part(s)? Will all or some of them be",
"polarity of my power supply to the RAMPS board, what",
"Arduino Mega; * Stepper motor and/or drivers, or; * Any",
"* Any other electronic part(s)? Will all or some of",
"reverse the polarity of my power supply to the RAMPS",
"and/or drivers, or; * Any other electronic part(s)? Will all",
"the polarity of my power supply to the RAMPS board,",
"board, what *exactly* will be damaged? Will it harm my:",
"what *exactly* will be damaged? Will it harm my: *",
"of my power supply to the RAMPS board, what *exactly*",
"be damaged? Will it harm my: * RAMPS; * Arduino",
"to the RAMPS board, what *exactly* will be damaged? Will",
"I *accidentally* reverse the polarity of my power supply to",
"* Arduino Mega; * Stepper motor and/or drivers, or; *",
"Will it harm my: * RAMPS; * Arduino Mega; *",
"damaged? Will it harm my: * RAMPS; * Arduino Mega;",
"Mega; * Stepper motor and/or drivers, or; * Any other",
"Stepper motor and/or drivers, or; * Any other electronic part(s)?",
"my: * RAMPS; * Arduino Mega; * Stepper motor and/or",
"supply to the RAMPS board, what *exactly* will be damaged?",
"RAMPS; * Arduino Mega; * Stepper motor and/or drivers, or;",
"harm my: * RAMPS; * Arduino Mega; * Stepper motor",
"motor and/or drivers, or; * Any other electronic part(s)? Will",
"* RAMPS; * Arduino Mega; * Stepper motor and/or drivers,",
"* Stepper motor and/or drivers, or; * Any other electronic",
"*exactly* will be damaged? Will it harm my: * RAMPS;",
"drivers, or; * Any other electronic part(s)? Will all or",
"*accidentally* reverse the polarity of my power supply to the",
"RAMPS board, what *exactly* will be damaged? Will it harm",
"the RAMPS board, what *exactly* will be damaged? Will it",
"Any other electronic part(s)? Will all or some of them",
"part(s)? Will all or some of them be permanently damaged?"
] |
[
"to warp up from the corners of the bed. It",
"seen it. Note, this is the PRINT SURFACE warping, not",
"bed. It appears that the weak link is that the",
"the first print caused the edges of the PEI plastic",
"problem getting my PEI substrate to stick to the heated",
"heated bed is anodized black and the adhesive is a",
"surface of my Flashforge Creator Pro printer. The heated bed",
"problem, but perhaps someone has seen it. Note, this is",
"on this problem, but perhaps someone has seen it. Note,",
"air bubbles when first attached, but the first print caused",
"bed is anodized black and the adhesive is a sheet",
"not uniform, removal of the PEI sheet showed that 95%",
"removal of the PEI sheet showed that 95% of the",
"has one glossy side and one matte side, and I",
"matte side to get the glossy surface. Does this make",
"the PEI detached from the adhesive. While this was not",
"sheet showed that 95% of the adhesive was still attached",
"figured this was a clean as it was ever going",
"surface. The ABS item being printed stuck great to the",
"PEI plastic sheet directly to the heated surface of my",
"side to get the glossy surface. Does this make a",
"was ever going to get. I'd definitely appreciate some ideas",
"my Flashforge Creator Pro printer. The heated bed is anodized",
"part went great with no delamination even on a large",
"heated bed surface. The ABS item being printed stuck great",
"PEI substrate to stick to the heated bed surface. The",
"went great with no delamination even on a large flat",
"bottom. I'm using 3M 468 adhesive to attach a PEI",
"applied the adhesive to the PEI surface just as it",
"sheet directly to the heated surface of my Flashforge Creator",
"one glossy side and one matte side, and I chose",
"adhesive to attach a PEI plastic sheet directly to the",
"PEI has one glossy side and one matte side, and",
"the glossy surface. Does this make a difference? I applied",
"Creator Pro printer. The heated bed is anodized black and",
"PEI surface just as it was after removing the protective",
"cut to the requisite 6\" X 9\". It seemed fine",
"I'm (surprisingly) having a problem getting my PEI substrate to",
"adhesive to the matte side to get the glossy surface.",
"great to the PEI surface. I've not seen anyone else",
"printed. That part went great with no delamination even on",
"9\". It seemed fine and looked pretty good with few",
"detached from the adhesive. While this was not uniform, removal",
"adhesive is a sheet cut to the requisite 6\" X",
"first attached, but the first print caused the edges of",
"glossy side and one matte side, and I chose to",
"someone has seen it. Note, this is the PRINT SURFACE",
"3M 468 adhesive to attach a PEI plastic sheet directly",
"bed. The PEI has one glossy side and one matte",
"side, and I chose to apply the adhesive to the",
"chose to apply the adhesive to the matte side to",
"the matte side to get the glossy surface. Does this",
"to attach a PEI plastic sheet directly to the heated",
"substrate to stick to the heated bed surface. The ABS",
"the requisite 6\" X 9\". It seemed fine and looked",
"this was a clean as it was ever going to",
"get the glossy surface. Does this make a difference? I",
"the PEI sheet showed that 95% of the adhesive was",
"a clean as it was ever going to get. I'd",
"one matte side, and I chose to apply the adhesive",
"the adhesive is a sheet cut to the requisite 6\"",
"heated surface of my Flashforge Creator Pro printer. The heated",
"the adhesive. While this was not uniform, removal of the",
"warping, not the item being printed. That part went great",
"the bed. It appears that the weak link is that",
"is a sheet cut to the requisite 6\" X 9\".",
"weak link is that the PEI detached from the adhesive.",
"with no delamination even on a large flat bottom. I'm",
"but the first print caused the edges of the PEI",
"this was not uniform, removal of the PEI sheet showed",
"the adhesive was still attached to the print bed. The",
"perhaps someone has seen it. Note, this is the PRINT",
"the heated surface of my Flashforge Creator Pro printer. The",
"protective plastic coating. I figured this was a clean as",
"directly to the heated surface of my Flashforge Creator Pro",
"stick to the heated bed surface. The ABS item being",
"that 95% of the adhesive was still attached to the",
"The ABS item being printed stuck great to the PEI",
"of the PEI sheet showed that 95% of the adhesive",
"(surprisingly) having a problem getting my PEI substrate to stick",
"this is the PRINT SURFACE warping, not the item being",
"468 adhesive to attach a PEI plastic sheet directly to",
"to stick to the heated bed surface. The ABS item",
"is anodized black and the adhesive is a sheet cut",
"the PEI plastic to warp up from the corners of",
"surface. Does this make a difference? I applied the adhesive",
"make a difference? I applied the adhesive to the PEI",
"to the matte side to get the glossy surface. Does",
"removing the protective plastic coating. I figured this was a",
"the PRINT SURFACE warping, not the item being printed. That",
"fine and looked pretty good with few air bubbles when",
"the weak link is that the PEI detached from the",
"plastic coating. I figured this was a clean as it",
"to the heated bed surface. The ABS item being printed",
"it. Note, this is the PRINT SURFACE warping, not the",
"it was ever going to get. I'd definitely appreciate some",
"great with no delamination even on a large flat bottom.",
"a PEI plastic sheet directly to the heated surface of",
"as it was ever going to get. I'd definitely appreciate",
"post on this problem, but perhaps someone has seen it.",
"not the item being printed. That part went great with",
"having a problem getting my PEI substrate to stick to",
"the corners of the bed. It appears that the weak",
"still attached to the print bed. The PEI has one",
"sheet cut to the requisite 6\" X 9\". It seemed",
"adhesive to the PEI surface just as it was after",
"this problem, but perhaps someone has seen it. Note, this",
"has seen it. Note, this is the PRINT SURFACE warping,",
"anyone else post on this problem, but perhaps someone has",
"even on a large flat bottom. I'm using 3M 468",
"anodized black and the adhesive is a sheet cut to",
"flat bottom. I'm using 3M 468 adhesive to attach a",
"after removing the protective plastic coating. I figured this was",
"good with few air bubbles when first attached, but the",
"I figured this was a clean as it was ever",
"of the adhesive was still attached to the print bed.",
"going to get. I'd definitely appreciate some ideas on this.",
"glossy surface. Does this make a difference? I applied the",
"the PEI surface. I've not seen anyone else post on",
"requisite 6\" X 9\". It seemed fine and looked pretty",
"the print bed. The PEI has one glossy side and",
"Flashforge Creator Pro printer. The heated bed is anodized black",
"as it was after removing the protective plastic coating. I",
"being printed. That part went great with no delamination even",
"I applied the adhesive to the PEI surface just as",
"coating. I figured this was a clean as it was",
"clean as it was ever going to get. I'd definitely",
"delamination even on a large flat bottom. I'm using 3M",
"PEI sheet showed that 95% of the adhesive was still",
"apply the adhesive to the matte side to get the",
"and I chose to apply the adhesive to the matte",
"of my Flashforge Creator Pro printer. The heated bed is",
"I'm using 3M 468 adhesive to attach a PEI plastic",
"seemed fine and looked pretty good with few air bubbles",
"was a clean as it was ever going to get.",
"on a large flat bottom. I'm using 3M 468 adhesive",
"to get the glossy surface. Does this make a difference?",
"stuck great to the PEI surface. I've not seen anyone",
"is the PRINT SURFACE warping, not the item being printed.",
"side and one matte side, and I chose to apply",
"was not uniform, removal of the PEI sheet showed that",
"was still attached to the print bed. The PEI has",
"95% of the adhesive was still attached to the print",
"getting my PEI substrate to stick to the heated bed",
"The PEI has one glossy side and one matte side,",
"caused the edges of the PEI plastic to warp up",
"of the PEI plastic to warp up from the corners",
"being printed stuck great to the PEI surface. I've not",
"was after removing the protective plastic coating. I figured this",
"surface. I've not seen anyone else post on this problem,",
"seen anyone else post on this problem, but perhaps someone",
"but perhaps someone has seen it. Note, this is the",
"and looked pretty good with few air bubbles when first",
"It appears that the weak link is that the PEI",
"few air bubbles when first attached, but the first print",
"matte side, and I chose to apply the adhesive to",
"PEI surface. I've not seen anyone else post on this",
"using 3M 468 adhesive to attach a PEI plastic sheet",
"that the PEI detached from the adhesive. While this was",
"this make a difference? I applied the adhesive to the",
"PEI plastic to warp up from the corners of the",
"when first attached, but the first print caused the edges",
"the item being printed. That part went great with no",
"edges of the PEI plastic to warp up from the",
"to the print bed. The PEI has one glossy side",
"ever going to get. I'd definitely appreciate some ideas on",
"plastic sheet directly to the heated surface of my Flashforge",
"just as it was after removing the protective plastic coating.",
"black and the adhesive is a sheet cut to the",
"Does this make a difference? I applied the adhesive to",
"I chose to apply the adhesive to the matte side",
"PRINT SURFACE warping, not the item being printed. That part",
"and the adhesive is a sheet cut to the requisite",
"uniform, removal of the PEI sheet showed that 95% of",
"PEI detached from the adhesive. While this was not uniform,",
"that the weak link is that the PEI detached from",
"ABS item being printed stuck great to the PEI surface.",
"Note, this is the PRINT SURFACE warping, not the item",
"appears that the weak link is that the PEI detached",
"to the PEI surface just as it was after removing",
"no delamination even on a large flat bottom. I'm using",
"print bed. The PEI has one glossy side and one",
"looked pretty good with few air bubbles when first attached,",
"not seen anyone else post on this problem, but perhaps",
"warp up from the corners of the bed. It appears",
"plastic to warp up from the corners of the bed.",
"attached to the print bed. The PEI has one glossy",
"SURFACE warping, not the item being printed. That part went",
"6\" X 9\". It seemed fine and looked pretty good",
"up from the corners of the bed. It appears that",
"and one matte side, and I chose to apply the",
"to apply the adhesive to the matte side to get",
"the heated bed surface. The ABS item being printed stuck",
"large flat bottom. I'm using 3M 468 adhesive to attach",
"attached, but the first print caused the edges of the",
"from the corners of the bed. It appears that the",
"a difference? I applied the adhesive to the PEI surface",
"the protective plastic coating. I figured this was a clean",
"my PEI substrate to stick to the heated bed surface.",
"surface just as it was after removing the protective plastic",
"a sheet cut to the requisite 6\" X 9\". It",
"bed surface. The ABS item being printed stuck great to",
"of the bed. It appears that the weak link is",
"link is that the PEI detached from the adhesive. While",
"from the adhesive. While this was not uniform, removal of",
"corners of the bed. It appears that the weak link",
"bubbles when first attached, but the first print caused the",
"else post on this problem, but perhaps someone has seen",
"to the requisite 6\" X 9\". It seemed fine and",
"to the heated surface of my Flashforge Creator Pro printer.",
"I've not seen anyone else post on this problem, but",
"it was after removing the protective plastic coating. I figured",
"printed stuck great to the PEI surface. I've not seen",
"printer. The heated bed is anodized black and the adhesive",
"attach a PEI plastic sheet directly to the heated surface",
"the edges of the PEI plastic to warp up from",
"showed that 95% of the adhesive was still attached to",
"pretty good with few air bubbles when first attached, but",
"It seemed fine and looked pretty good with few air",
"the adhesive to the PEI surface just as it was",
"adhesive. While this was not uniform, removal of the PEI",
"While this was not uniform, removal of the PEI sheet",
"with few air bubbles when first attached, but the first",
"a large flat bottom. I'm using 3M 468 adhesive to",
"to the PEI surface. I've not seen anyone else post",
"item being printed. That part went great with no delamination",
"X 9\". It seemed fine and looked pretty good with",
"print caused the edges of the PEI plastic to warp",
"a problem getting my PEI substrate to stick to the",
"item being printed stuck great to the PEI surface. I've",
"first print caused the edges of the PEI plastic to",
"the PEI surface just as it was after removing the",
"Pro printer. The heated bed is anodized black and the",
"is that the PEI detached from the adhesive. While this",
"the adhesive to the matte side to get the glossy",
"difference? I applied the adhesive to the PEI surface just",
"That part went great with no delamination even on a",
"adhesive was still attached to the print bed. The PEI",
"The heated bed is anodized black and the adhesive is"
] |
[
"code on my printer, I wanted to get some experts",
"not going to hurt anything. :) Here is what I",
"center and top to prepare for cleaning/maintenance M107 ; fan",
"to get the printhead to raise all the way up",
"few lines from gcode generated by Slic3r and used the",
"snippet of gcode that I could just run which would",
"I've got a Monoprice Mini Select (15365) and it takes",
"figured it would be too hard. However, before running this",
"the print area are 120mm x 120mm x 120mm G0",
"M107 ; fan off G28 ; home all axes G21",
"120mm x 120mm G0 X60 Y60 Z119 ; move to",
"G0 X60 Y60 Z119 ; move to center X,Y and",
"commands necessary to do that for me. I'm a n00b",
"120mm x 120mm x 120mm G0 X60 Y60 Z119 ;",
"got a Monoprice Mini Select (15365) and it takes FOREVER",
"; fan off G28 ; home all axes G21 ;",
"; home all axes G21 ; set units to millimeters",
"print area are 120mm x 120mm x 120mm G0 X60",
"double check me to make sure I'm not going to",
"So, I was thinking about writing a snippet of gcode",
"x 120mm G0 X60 Y60 Z119 ; move to center",
"old programmer so I figured it would be too hard.",
"just below the max height M84 ; disable motors ```",
"to 3D printing, but I'm an old programmer so I",
"used the gcode wiki entry to understand each of the",
"nozzle or apply new tape to the bed, etc). So,",
"experts to double check me to make sure I'm not",
"the gcode wiki entry to understand each of the commands",
"units to millimeters G90 ; use absolute coordinates ; full",
"was thinking about writing a snippet of gcode that I",
"x 120mm x 120mm G0 X60 Y60 Z119 ; move",
"would be too hard. However, before running this code on",
"apply new tape to the bed, etc). So, I was",
"G21 ; set units to millimeters G90 ; use absolute",
"about writing a snippet of gcode that I could just",
"millimeters G90 ; use absolute coordinates ; full dimensions of",
"printhead to raise all the way up so that I",
"anything wrong or if you have any suggestions. ``` ;",
"raise all the way up so that I can perform",
"bed, etc). So, I was thinking about writing a snippet",
"it would be too hard. However, before running this code",
"hurt anything. :) Here is what I have, please let",
"going to hurt anything. :) Here is what I have,",
"new tape to the bed, etc). So, I was thinking",
"Y60 Z119 ; move to center X,Y and just below",
"to center and top to prepare for cleaning/maintenance M107 ;",
"the printhead to raise all the way up so that",
"done anything wrong or if you have any suggestions. ```",
"home all axes G21 ; set units to millimeters G90",
"G28 ; home all axes G21 ; set units to",
"gcode wiki entry to understand each of the commands and",
"max height M84 ; disable motors ``` I grabbed a",
"120mm G0 X60 Y60 Z119 ; move to center X,Y",
"necessary to do that for me. I'm a n00b to",
"to get some experts to double check me to make",
"do that for me. I'm a n00b to 3D printing,",
"use absolute coordinates ; full dimensions of the print area",
"G90 ; use absolute coordinates ; full dimensions of the",
"before running this code on my printer, I wanted to",
"contain the commands necessary to do that for me. I'm",
"Z119 ; move to center X,Y and just below the",
"run which would contain the commands necessary to do that",
"blockages in the nozzle or apply new tape to the",
"absolute coordinates ; full dimensions of the print area are",
"to make sure I'm not going to hurt anything. :)",
"have, please let me know if I've done anything wrong",
"be too hard. However, before running this code on my",
"fan off G28 ; home all axes G21 ; set",
"if you have any suggestions. ``` ; Move print head",
"which would contain the commands necessary to do that for",
"my printer, I wanted to get some experts to double",
"dimensions of the print area are 120mm x 120mm x",
"the max height M84 ; disable motors ``` I grabbed",
"prepare for cleaning/maintenance M107 ; fan off G28 ; home",
"Mini Select (15365) and it takes FOREVER for me to",
"; Move print head to center and top to prepare",
"or if you have any suggestions. ``` ; Move print",
":) Here is what I have, please let me know",
"if I've done anything wrong or if you have any",
"to manually spin the dial to get the printhead to",
"(clear blockages in the nozzle or apply new tape to",
"could just run which would contain the commands necessary to",
"gcode generated by Slic3r and used the gcode wiki entry",
"suggestions. ``` ; Move print head to center and top",
"X60 Y60 Z119 ; move to center X,Y and just",
"it takes FOREVER for me to manually spin the dial",
"; use absolute coordinates ; full dimensions of the print",
"Select (15365) and it takes FOREVER for me to manually",
"head to center and top to prepare for cleaning/maintenance M107",
"I was thinking about writing a snippet of gcode that",
"Here is what I have, please let me know if",
"etc). So, I was thinking about writing a snippet of",
"you have any suggestions. ``` ; Move print head to",
"``` ; Move print head to center and top to",
"I'm an old programmer so I figured it would be",
"to hurt anything. :) Here is what I have, please",
"that I can perform maintenance (clear blockages in the nozzle",
"Move print head to center and top to prepare for",
"of gcode that I could just run which would contain",
"would contain the commands necessary to do that for me.",
"motors ``` I grabbed a few lines from gcode generated",
"(15365) and it takes FOREVER for me to manually spin",
"; full dimensions of the print area are 120mm x",
"X,Y and just below the max height M84 ; disable",
"to understand each of the commands and fill in the",
"below the max height M84 ; disable motors ``` I",
"I could just run which would contain the commands necessary",
"; move to center X,Y and just below the max",
"I grabbed a few lines from gcode generated by Slic3r",
"and just below the max height M84 ; disable motors",
"hard. However, before running this code on my printer, I",
"wanted to get some experts to double check me to",
"me to manually spin the dial to get the printhead",
"programmer so I figured it would be too hard. However,",
"I've done anything wrong or if you have any suggestions.",
"from gcode generated by Slic3r and used the gcode wiki",
"n00b to 3D printing, but I'm an old programmer so",
"tape to the bed, etc). So, I was thinking about",
"``` I grabbed a few lines from gcode generated by",
"I wanted to get some experts to double check me",
"spin the dial to get the printhead to raise all",
"in the nozzle or apply new tape to the bed,",
"to do that for me. I'm a n00b to 3D",
"but I'm an old programmer so I figured it would",
"wrong or if you have any suggestions. ``` ; Move",
"perform maintenance (clear blockages in the nozzle or apply new",
"get some experts to double check me to make sure",
"and top to prepare for cleaning/maintenance M107 ; fan off",
"that I could just run which would contain the commands",
"3D printing, but I'm an old programmer so I figured",
"an old programmer so I figured it would be too",
"I'm not going to hurt anything. :) Here is what",
"off G28 ; home all axes G21 ; set units",
"area are 120mm x 120mm x 120mm G0 X60 Y60",
"to the bed, etc). So, I was thinking about writing",
"; set units to millimeters G90 ; use absolute coordinates",
"a few lines from gcode generated by Slic3r and used",
"by Slic3r and used the gcode wiki entry to understand",
"all the way up so that I can perform maintenance",
"I can perform maintenance (clear blockages in the nozzle or",
"the dial to get the printhead to raise all the",
"a n00b to 3D printing, but I'm an old programmer",
"top to prepare for cleaning/maintenance M107 ; fan off G28",
"generated by Slic3r and used the gcode wiki entry to",
"any suggestions. ``` ; Move print head to center and",
"check me to make sure I'm not going to hurt",
"to double check me to make sure I'm not going",
"disable motors ``` I grabbed a few lines from gcode",
"set units to millimeters G90 ; use absolute coordinates ;",
"can perform maintenance (clear blockages in the nozzle or apply",
"cleaning/maintenance M107 ; fan off G28 ; home all axes",
"to millimeters G90 ; use absolute coordinates ; full dimensions",
"grabbed a few lines from gcode generated by Slic3r and",
"or apply new tape to the bed, etc). So, I",
"for cleaning/maintenance M107 ; fan off G28 ; home all",
"to prepare for cleaning/maintenance M107 ; fan off G28 ;",
"Slic3r and used the gcode wiki entry to understand each",
"so that I can perform maintenance (clear blockages in the",
"; disable motors ``` I grabbed a few lines from",
"me know if I've done anything wrong or if you",
"me to make sure I'm not going to hurt anything.",
"printer, I wanted to get some experts to double check",
"a Monoprice Mini Select (15365) and it takes FOREVER for",
"and used the gcode wiki entry to understand each of",
"Monoprice Mini Select (15365) and it takes FOREVER for me",
"for me to manually spin the dial to get the",
"know if I've done anything wrong or if you have",
"are 120mm x 120mm x 120mm G0 X60 Y60 Z119",
"sure I'm not going to hurt anything. :) Here is",
"the bed, etc). So, I was thinking about writing a",
"for me. I'm a n00b to 3D printing, but I'm",
"the way up so that I can perform maintenance (clear",
"the nozzle or apply new tape to the bed, etc).",
"running this code on my printer, I wanted to get",
"up so that I can perform maintenance (clear blockages in",
"entry to understand each of the commands and fill in",
"please let me know if I've done anything wrong or",
"a snippet of gcode that I could just run which",
"just run which would contain the commands necessary to do",
"However, before running this code on my printer, I wanted",
"some experts to double check me to make sure I'm",
"make sure I'm not going to hurt anything. :) Here",
"get the printhead to raise all the way up so",
"what I have, please let me know if I've done",
"center X,Y and just below the max height M84 ;",
"M84 ; disable motors ``` I grabbed a few lines",
"printing, but I'm an old programmer so I figured it",
"gcode that I could just run which would contain the",
"of the commands and fill in the extra ones I",
"and it takes FOREVER for me to manually spin the",
"I have, please let me know if I've done anything",
"lines from gcode generated by Slic3r and used the gcode",
"let me know if I've done anything wrong or if",
"understand each of the commands and fill in the extra",
"have any suggestions. ``` ; Move print head to center",
"anything. :) Here is what I have, please let me",
"maintenance (clear blockages in the nozzle or apply new tape",
"thinking about writing a snippet of gcode that I could",
"too hard. However, before running this code on my printer,",
"FOREVER for me to manually spin the dial to get",
"each of the commands and fill in the extra ones",
"print head to center and top to prepare for cleaning/maintenance",
"to center X,Y and just below the max height M84",
"of the print area are 120mm x 120mm x 120mm",
"is what I have, please let me know if I've",
"so I figured it would be too hard. However, before",
"dial to get the printhead to raise all the way",
"on my printer, I wanted to get some experts to",
"all axes G21 ; set units to millimeters G90 ;",
"wiki entry to understand each of the commands and fill",
"I'm a n00b to 3D printing, but I'm an old",
"the commands necessary to do that for me. I'm a",
"move to center X,Y and just below the max height",
"writing a snippet of gcode that I could just run",
"full dimensions of the print area are 120mm x 120mm",
"me. I'm a n00b to 3D printing, but I'm an",
"takes FOREVER for me to manually spin the dial to",
"manually spin the dial to get the printhead to raise",
"I figured it would be too hard. However, before running",
"this code on my printer, I wanted to get some",
"way up so that I can perform maintenance (clear blockages",
"the commands and fill in the extra ones I needed.",
"to raise all the way up so that I can",
"axes G21 ; set units to millimeters G90 ; use",
"that for me. I'm a n00b to 3D printing, but",
"height M84 ; disable motors ``` I grabbed a few",
"coordinates ; full dimensions of the print area are 120mm"
] |
[
"mm, filament diameter (measured 1.75 mm) retraction distance 1.7 mm.",
"any issue with my prints I'm curious to know the",
"filament that are cause by the manufacturing process of the",
"the filament? Or is this more an indication that my",
"using ABS plastic and a heated build plate. I've noticed",
"This image was made using ABS plastic and a heated",
"causing any issue with my prints I'm curious to know",
"plate. I've noticed these same 'bubbles' appearing using PLA, and",
"the image, extruding to the left. [](https://i.stack.imgur.com/2we0A.jpg) This",
"by the manufacturing process of the filament? Or is this",
"mm. Using the Makerbot Desktop Slicer. The first line that",
"had. On the initial first line that clears the extruder",
"then bursts through the molten plastic? Is it due to",
"don't think these are causing any issue with my prints",
"noticed these same 'bubbles' appearing using PLA, and Nylon. Edit:",
"that my printer extrudes, where I'm seeing these 'bubbles' is",
"I'm curious to know the reason why they form at",
"form at all. Is this due to water absorption in",
"bubbles in the filament that are cause by the manufacturing",
"build plate temperature 150°C, Nozzle diameter 0.4 mm, filament diameter",
"think these are causing any issue with my prints I'm",
"reason why they form at all. Is this due to",
"extrusion](https://i.stack.imgur.com/2we0A.jpg)](https://i.stack.imgur.com/2we0A.jpg) This image was made using ABS plastic and a",
"same 'bubbles' appearing using PLA, and Nylon. Edit: Nozzle temperature",
"where I'm seeing these 'bubbles' is a nearly full line.",
"and Nylon. Edit: Nozzle temperature 240°C, build plate temperature 150°C,",
"at all. Is this due to water absorption in my",
"Slicer. The first line that my printer extrudes, where I'm",
"bubbles/craters seem to form on the line. While I don't",
"Is this due to water absorption in my filament that",
"is a nearly full line. Makerbot starts from the right",
"the molten plastic? Is it due to air bubbles in",
"cause by the manufacturing process of the filament? Or is",
"starts from the right side of the image, extruding to",
"first line that clears the extruder nozzle tiny little bubbles/craters",
"absorption in my filament that turns to steam, which then",
"are cause by the manufacturing process of the filament? Or",
"On the initial first line that clears the extruder nozzle",
"of the image, extruding to the left. [](https://i.stack.imgur.com/2we0A.jpg) This image was made using ABS plastic",
"line that my printer extrudes, where I'm seeing these 'bubbles'",
"temperature 240°C, build plate temperature 150°C, Nozzle diameter 0.4 mm,",
"in the filament that are cause by the manufacturing process",
"the line. While I don't think these are causing any",
"this more an indication that my nozzle is damaged or",
"the initial first line that clears the extruder nozzle tiny",
"prints I'm curious to know the reason why they form",
"The first line that my printer extrudes, where I'm seeing",
"and a heated build plate. I've noticed these same 'bubbles'",
"extruder nozzle tiny little bubbles/craters seem to form on the",
"the right side of the image, extruding to the left.",
"way? [](https://i.stack.imgur.com/2we0A.jpg) This image was made using ABS",
"plate temperature 150°C, Nozzle diameter 0.4 mm, filament diameter (measured",
"0.4 mm, filament diameter (measured 1.75 mm) retraction distance 1.7",
"mm) retraction distance 1.7 mm. Using the Makerbot Desktop Slicer.",
"Nylon. Edit: Nozzle temperature 240°C, build plate temperature 150°C, Nozzle",
"of the filament? Or is this more an indication that",
"indication that my nozzle is damaged or clogged in some",
"clears the extruder nozzle tiny little bubbles/craters seem to form",
"image, extruding to the left. [](https://i.stack.imgur.com/2we0A.jpg) This image was made",
"I've noticed these same 'bubbles' appearing using PLA, and Nylon.",
"little bubbles/craters seem to form on the line. While I",
"know the reason why they form at all. Is this",
"manufacturing process of the filament? Or is this more an",
"Nozzle diameter 0.4 mm, filament diameter (measured 1.75 mm) retraction",
"Is it due to air bubbles in the filament that",
"distance 1.7 mm. Using the Makerbot Desktop Slicer. The first",
"from the right side of the image, extruding to the",
"more an indication that my nozzle is damaged or clogged",
"I've noticed this on almost ever print I've ever had.",
"I've ever had. On the initial first line that clears",
"clogged in some way? [](https://i.stack.imgur.com/2we0A.jpg) This image was",
"image was made using ABS plastic and a heated build",
"plastic and a heated build plate. I've noticed these same",
"using PLA, and Nylon. Edit: Nozzle temperature 240°C, build plate",
"nearly full line. Makerbot starts from the right side of",
"due to water absorption in my filament that turns to",
"my prints I'm curious to know the reason why they",
"side of the image, extruding to the left. [](https://i.stack.imgur.com/2we0A.jpg) This image was made using ABS plastic and",
"initial first line that clears the extruder nozzle tiny little",
"air bubbles in the filament that are cause by the",
"1.7 mm. Using the Makerbot Desktop Slicer. The first line",
"my filament that turns to steam, which then bursts through",
"that my nozzle is damaged or clogged in some way?",
"line. While I don't think these are causing any issue",
"issue with my prints I'm curious to know the reason",
"'bubbles' is a nearly full line. Makerbot starts from the",
"all. Is this due to water absorption in my filament",
"the manufacturing process of the filament? Or is this more",
"process of the filament? Or is this more an indication",
"almost ever print I've ever had. On the initial first",
"'bubbles' appearing using PLA, and Nylon. Edit: Nozzle temperature 240°C,",
"why they form at all. Is this due to water",
"ABS plastic and a heated build plate. I've noticed these",
"seem to form on the line. While I don't think",
"first line that my printer extrudes, where I'm seeing these",
"the Makerbot Desktop Slicer. The first line that my printer",
"bursts through the molten plastic? Is it due to air",
"extruding to the left. [](https://i.stack.imgur.com/3sf99.jpg)",
"I'm seeing these 'bubbles' is a nearly full line. Makerbot",
"these 'bubbles' is a nearly full line. Makerbot starts from",
"steam, which then bursts through the molten plastic? Is it",
"some way? [](https://i.stack.imgur.com/2we0A.jpg) This image was made using",
"or clogged in some way? [](https://i.stack.imgur.com/2we0A.jpg) This image",
"my printer extrudes, where I'm seeing these 'bubbles' is a",
"that turns to steam, which then bursts through the molten",
"to water absorption in my filament that turns to steam,",
"filament that turns to steam, which then bursts through the",
"line that clears the extruder nozzle tiny little bubbles/craters seem",
"the extruder nozzle tiny little bubbles/craters seem to form on",
"line. Makerbot starts from the right side of the image,",
"diameter (measured 1.75 mm) retraction distance 1.7 mm. Using the",
"filament? Or is this more an indication that my nozzle",
"PLA, and Nylon. Edit: Nozzle temperature 240°C, build plate temperature",
"nozzle is damaged or clogged in some way? [](https://i.stack.imgur.com/2we0A.jpg)",
"Using the Makerbot Desktop Slicer. The first line that my",
"to air bubbles in the filament that are cause by",
"1.75 mm) retraction distance 1.7 mm. Using the Makerbot Desktop",
"retraction distance 1.7 mm. Using the Makerbot Desktop Slicer. The",
"on the line. While I don't think these are causing",
"an indication that my nozzle is damaged or clogged in",
"temperature 150°C, Nozzle diameter 0.4 mm, filament diameter (measured 1.75"
] |