Split (1)

train · 10.4M rows

ngram listlengths 0 9.89k
[ "which way they install. I found something saying to match", "got a new MKS 1.4 controller board and it came", "to that on the board. But I don't see anything", "way they install. I found something saying to match the", "board and it came with A4988 driver chips. But I", "came with A4988 driver chips. But...
[ "seem fine, but the more sloped outer parts of the", "almost like the slicer isn't recognizing the sloped part as", "the sloped sides are pretty much the same - this", "outer parts of the dome are very thin, with some", "shells, and it looks great! [![Printed with Cura](https://i.stack.imgur.com/D4iC5.jpg)]...
[ "from my Simplify3D on Windows 10, I get the following:", "0 READ: wait SENT: M105 READ: ok 0 READ: T:24.44", "READ: ok 0 READ: wait SENT: M105 READ: ok 0", "board) that seems to work fine (I just finished building,", "building, and axes movement and the integrated display work) but", "(very similar to th...
[ "hands and feet/base intact, but you can see the blobbing", "left hand was not well-attached and fell off rather easily.", "problems when I use the Novice mode settings in Cura", "My printer is calibrated, as level as can be (the", "part of the print. If I use full grid supports", "of detail in the more f...
[ "I manage to keep my tolerances +- 0.05 mm which", "of filament have on final print quality, and why? Does", "filament have on final print quality, and why? Does it", "clarification on that answer regarding what is meant by \"miniature", "> > I have asked for clarification on that answer", "everything but...
[ "issue with certain types of models? Not sure what to", "incomplete. Hovering the model with the mouse shows more details:", "with certain types of models? Not sure what to try", "Slic3er (v1.2.9 running on OS X), and it's reporting \"Manifold:", "issue. But I loaded this same model into Cura earlier", "j...
[ "- no flash](https://i.stack.imgur.com/uDyF2.jpg)](https://i.stack.imgur.com/uDyF2.jpg) [![Blocked extruder - flash](https://i.stack.imgur.com/iL1mQ.jpg)](https://i.stack.imgur.com/iL1mQ.jpg) As you can", "filament broke and the \"stone\" is still there. Does anyone", "that the clog is at the heater block level...
[ "If I had to build a printer designed with safety", "or need fuses or other parts that do support 24", "24 V system cause less danger? I would think that", "support 24 V, many don't or need fuses or other", "a bit over fairly comfortably. A 24 V power supply", "a while that use it. Although there are an i...
[ "on the original Makerbot replicator 1st release followed by using", "off by twisting the flexible steel as opposed to chiseling", "0.06 mm which can pull 115 and 145 lbs respectively.", "one. * Has anyone made a bed using adhesive magnetic", "your prints off by twisting the flexible steel as opposed", "B...
[ "found out about special non-conductive PLA and conductive PLA. But", "and found out about special non-conductive PLA and conductive PLA.", "The print will be most likely to be in PLA.", "print will be most likely to be in PLA. I", "contact with PCB boards. The print will be most likely", "most likely to ...
[ "high one? Should I go for line or hexagon? I", "mentioned on the above link? I'm a little bit confused", "a little bit confused how it can make the part", "like glass!](http://taulman3d.com/t-glase-optics.html) First question, what kind of printing settings should", "would like to print a transparent hemis...
[ "was an error in printing that caused the printer to", "recalibrate everything, or; * something, most likely the nozzle, is", "done nothing. I'm left with two conclusions, either: * this", "instead exactly a millimeter of filament comes out the same", "printing after remaining on all night - it took some", ...
[ "different models? If it is the latter, which particular model", "well. Is there any way I can still make use", "any way I can still make use the 3 mm", "Is there any way I can still make use the", "need to use the filaments on different models? If it", "filaments instead of 1.75 mm. I have a Makerbot Rep...
[ "it be feasible (at an affordable price) to 3D print", "some chocs and maybe a little bit of pressure if", "the sun or in a cold ocean) * strength (the", "(at least several months, maybe more, about a year or", "last during extended periods of time in water (at least", "am mostly concerned about: * ...
[ "inaccuracy, or \"wobble\" (for want of a better word (as", "not required on an everyday basis, but the tension would", "from aluminium, surely weight can not be a major factor...", "more than a reel of GT2 and a couple of", "B\\$, here in BKK, Thailand), which is obviously more than", "than a reel of G...
[ "next morning I'd find one corner warped up. This is", "glass. I've tried all sorts of adhesives. I tried blue", "to it the next morning I'd find one corner warped", "blue tape with 502 Glue. I used brim and the", "clean glass. I've tried all sorts of adhesives. I tried", "perfectly flat. When I go back t...
[ "set a non-commercial license for my designs? Thingiverse allows several", "is a legal question it might matter what jurisdiction I", "restrict my use of SketchUp Make generated material with sites", "be found on the [SketchUp website](https://www.sketchup.com/). In what ways does", "matter what jurisdictio...
[ "without supports because from Y-start to Y-end they are <=", "like to print as much of them as possible in", "(between 90° and 320° and 10/30 cm of diameter) and", "<= 45° (as the green line shows) is that right?", "print my things without supports because from Y-start to Y-end", "things [![Illustration ...
[ "the probe was lower than the nozzle, which means I", "find the issue? This is my first printer, so I'm", "in positions far from what should be expected for a", "against the sheet > of paper and the nozzle is", "advice. I tried to put the PINDA probe lower. It", "can I check? How to find the issue? This i...
[ "are not lose. Everything seems good. My printer ---------- ![mElephant](https://makeblock.lt/up/so/melephant.jpg)", "am using PLA filament from <https://makeblock.lt> ![3d-waves](https://makeblock.lt/up/so/3d-waves.jpg) What I tried", "the bolts are not lose. Everything seems good. My printer", "I print with...
[ "the best way to get some of these printed? Do", "to break and we'd like to 3d print some replacement", "replacement parts. We don't have CAD or any other 3D", "part I need to print. Placed next to a quarter", "of these printed? Do I have to turn this into", "from a pre-existing key being used as the temp...
[ "here to fill the letters properly? I used Slic3er and", "can see, nasty gaps have appeared in the text. What", "made it: [![3D print of Nuka-Cola bottle opener](https://i.stack.imgur.com/ysVvW.jpg)](https://i.stack.imgur.com/ysVvW.jpg) As you", "properly? I used Slic3er and Repetier Host. My printer is", "...
[ "to tape and that worked once but it is not", "rubbing alcohol and it happened again. What else can I", "extruded layer on Prusa i3](https://i.stack.imgur.com/ShfZn.jpg)](https://i.stack.imgur.com/ShfZn.jpg) I have tried levelling the", "else can I do to get the first layer right?", "and it seems to be leve...
[ "; use absolute coordinates M82 ; use absolute distances for", "E2.00000 F2400.00000 G1 X22.715 Y-22.716 E4.86865 F1800.000 G1 X22.715 Y22.716", "infill extrusion width = 0.58mm ; top infill extrusion width", "X30.885 Y-28.589 E7.85985 G1 X31.746 Y-26.414 E8.00759 G1 X31.893 Y-25.001", "width = 0.58mm M107 ...
[ "fact that it does dissolve PLA does not really at", "does not form peroxides. > > One danger posed by", "THF is considered a relatively nontoxic solvent, with the median", "structure, be more toxic than wikipedia says or not dry", "on storage in air. > > > So well, this", "well. It could damage PLA struc...
[ "and repeated that after about 1 kg of filament printed.", "repeated that after about 1 kg of filament printed. No", "cause this goo - is the bearing breaking up or", "the black goo appears only on the front side of", "bearings as well, Z axis with lead screws. After about", "and the black goo appears onl...
[ "paper and of course the paper didn't come off the", "doing it on plain paper and of course the paper", "come off the plastic very well. It didn't matter for", "can put a paper with picture as a guide under", "It didn't matter for that specific case, but if I", "I was doing it on plain paper and of course...
[ "be able to pick up a usable Baudrate (after being", "trying out all of the usable ones). For example, when", "I got the same types of messages back (with garbled", "M110 N0\\*125 > > > Recv: ��r># ��& � >", "seemed to be going smoothly until I tried to connect", "FlashForge Creator Pro (2014 edition) Ev...
[ "a reliable distance. However, when I try to print from", "cost: None ;M190 S50 ;Uncomment to add your own bed", "to min endstops G1 Z15.0 F3000 ;move the platform down", "G1 F2400 E-4.50000 G0 F3000 X81.474 Y58.603 Z0.300 ;TYPE:WALL-INNER G1", "feed stock G92 E0 ;zero the extruded length again G1", ";LAY...
[ "I throw PLA in there and it does not decompose,", "biodegradable. But I still don't know how much biodegradable. I", "eventually, eg. in years? And if it decomposes, is it", "say PLA is biodegradable. But I still don't know how", "the courtyard. However if I throw PLA in there and", "of them are in...
[ "will any imperfections be negligible, thus making the dice fair?", "so focus on that shape if need be. --- I", "if you believe a different printing process would have an", "on a specific side more frequently? Or will any imperfections", "making the dice fair? I'm more concerned about making a", "than any...
[ "split the part](https://i.stack.imgur.com/L2hhV.png \"Cut Cross Section\")](https://i.stack.imgur.com/L2hhV.png \"Cut Cross Section\") Cut", "Even though it would fit I'd still need to print", "the printer. Even though it would fit I'd still need", "to print it in two parts because I'll need to", "printer....
[ "width: Slic3r chosen * Print temperature: 220°C I've noticed in", "print job produces smooth sidewalls for most of the part", "the print settings are listed below: * Slicer: Slic3r *", "insight? [![Problem demonstration](https://i.stack.imgur.com/796O7.jpg)](https://i.stack.imgur.com/796O7.jpg) I'm using a P...
[ "in 1/160 the printing may fail because the wall thickness", "a shell for a model railroad car. Since 1/87th is", "for a model railroad car. Since 1/87th is the most", "a larger scale, say 1/48, the wall thickness will nearly", "falls below the minimum the printer will support. Any ideas?", "larger scale,...
[ "none (and nothing close to it). Could you please explain", "for a template to give to some printing service, but", "looked for a template to give to some printing service,", "to some printing service, but I found none (and nothing", "(and nothing close to it). Could you please explain me,", "I always rea...
[ "tape on the heated bed and right before the print", "and right before the print I am wiping the bed", "it falls off the bed. I am using tape on", "to the bed when it was mid way through so", "the bed. I am using tape on the heated bed", "temperature of the bed or is there something else that", "I am wi...
[ "to understand the effect of the infill pattern on the", "(i.e. a triangle is stronger than a square), so how", "printer makes only a single dot as the infill (a", "does that work with hex vs diamond? Also, in small", "Also, in small objects, where the printer makes only a", "a few places that hex is stro...
[ "did not only home XYZ to endstops, but it also", "for the moment I want to level things completely manually.", "way to move to (0, 0, 0) with the menu?", "plates (mesh levelling), but for the moment I want to", "leaves two related questions for me: Is there some simple", "level things completely manually...
[ "rather lack of lamination) at a certain height. I have", "My support structures are also VERY messy, whilst they were", "that I am not aware off. I am using CURA", "do a pretty much flawless print. But... Recently, I am", "head Oiled z-axis shafts What baffles me, is the weird", "and not 5mm worth of lay...
[ "the 3D printer's bed big enough - printing multiple copies", "print takes 10 hours, printing 2x copies at the same", "if my foo print takes 10 hours, printing 2x copies", "small production line, excluding minor wastage such as setup time,", "production line, excluding minor wastage such as setup time, post...
[ "If anyone has information or articles as leads, I would", "wish to know if printing details the size of 10-7", "know if printing details the size of 10-7 m (3.9\\10-6", "the size of 10-7 m (3.9\\10-6 in) is possible these", "with 3D printers. I wish to know if printing details", "days with metals or an...
[ "sunlight. They say PETg is the most durable material amongst", "amongst cheap ones. But what color to choose: white or", "outdoor durability, especially in sunlight. They say PETg is the", "a quad-copter now. I am not sure what color is", "I am not sure what color is the best to", "the best to use for ou...
[ "a raft and the second one was without a raft.[![Raft](https://i.stack.imgur.com/yLnZA.jpg)](https://i.stack.imgur.com/yLnZA.jpg)[![No", "without a raft.[![Raft](https://i.stack.imgur.com/yLnZA.jpg)](https://i.stack.imgur.com/yLnZA.jpg)[![No Raft](https://i.stack.imgur.com/x6vXw.jpg)](https://i.stack.imgur.com/x6...
[ "and have any idea what commands or sequence of commands", "or sequence of commands should be used to change nozzles?", "what commands or sequence of commands should be used to", "and it doesn't recenter but sometimes it does. I have", "custom G-code for a Malyan M180 and I am having", "to use to switch n...
[ "wondering if the concept can be extended to food printers", "some YouTube videos where the crafters make items with hinges.", "to food printers to make, for example, a sugar or", "to grasp how something with moving parts can be printed.", "watched some YouTube videos where the crafters make items with", ...
[ "encoder on the motor. Where can I find a sketch", "printer, since neither 3d printers have encoder on the motor.", "building an automatic warehouse system using three NEMA 17 stepper", "do not have any kind of encoder on the motor", "of the axes. I thought that the system could be", "a sketch for Arduino...
[ "bed, but every example I have seen where someone uses", "I have seen where someone uses hairspray, they use it", "but every example I have seen where someone uses hairspray,", "uses hairspray, they use it on a glass bed. Is", "every example I have seen where someone uses hairspray, they", "heard that usi...
[ "human to add the electronics or to change the tool", "on it in over a year. There is a similar", "place as well and they still need a human to", "head. ([firepick](http://delta.firepick.org/)) So are there any 3D printers that work", "to change the tool head. ([firepick](http://delta.firepick.org/)) So are...
[ "a normal cube just to try it out. However I", "something else i need to do? Thanks a lot for", "fall down as there is nothing underneath? Will I need", "part left of the printing where it needs to create", "nothing underneath? Will I need to check the \"Support\" function", "print-settings before hand or...
[ "if this is necessarily the best place but thought it's", "strength of a 3d printed part originally made by FDM.", "the layer separation is still the primary failure point. I'm", "material properties. The only method I've thought of that might", "molded part. Obviously less strength but there is a pretty", ...
[ "labels on the spools and I don't know whether they", "ABS or PLA. I got the plastic with the printer,", "which is now off sale (Solidoodle v2). I set my", "no labels on the spools and I don't know whether", "is now off sale (Solidoodle v2). I set my extruder", "unprofessional filament. The plastic filame...
[ "an option to \"split object into parts\" but I can't", "can't find that in cura 2.4. Did it get removed?", "to \"split object into parts\" but I can't find that", "with multiple parts that I want to split up. Cura", "split up. Cura 15 had an option to \"split object", "have an stl with multiple parts tha...
[ "I know this is still gray territory and it is", "I figured that it wasn't very much different than if", "there is nothing to be made from creating the render,", "to the original owner is given, is this Free Use", "and no physical model will be created. While considering all", "this but it is more of a cu...
[ "print consume. Is there a software so I can get", "an STL file and I would like to know how", "can get it or an online link that can say", "get it or an online link that can say me", "I would like to know how many grams would this", "like to know how many grams would this print consume.", "software so ...
[ "same basic resolution, accuracy, and material specs. 1. What are", "specs. 1. What are the advantages/disadvantages/differences between the P802 and", "I see Tronxy has two different styles for their larger", "for their larger printers: * P802 (reprap frame) style *", "a 3D printer to add to my shop. I am"...
[ "The spec sheet for the printers does not list anything", "7. Is anyone using either of these printers with Windows", "running Windows 10. The spec sheet for the printers does", "for the printers does not list anything above Windows 7.", "list anything above Windows 7. Is anyone using either of", "but, my...
[ "the inserts can be expected to be well-balanced (the correct", "tubes). These fit into the buckets and I'd like to", "the bottles. Examples of inserts are shown below (the colorful", "left corner holding the bottles. Examples of inserts are shown", "to be well-balanced (the correct weight, with a symetric ...
[ "available fume and nano particle extractor for a 3D printer,", "extended? I'm looking for a safe solution, to use at", "commercially available fume and nano particle extractor for a 3D", "Ultimaker3 extended? I'm looking for a safe solution, to use", "for a safe solution, to use at home, for around", "3D...
[ "(Error: Printer set into dry run mode until restart) then,", "can heat the bed and the extruder; I can extrude", "blocked the movement). Since then, the error appeared. I suspect", "error which doesn't let me print. Printer: Anet A8 Desktop", "can move perfectly any axis; I can heat the bed", "restar...
[ "to the print surface to get a reasonable first layer,", "BuildTak surface - especially to lower it in a controlled", "one another the way they are supposed to. What can", "with the 0.4mm nozzle before. If I bring the nozzle", "the layers start to stack onto one another the way", "the temperature!) so tha...
[ "I just accepted this to be truth, and have even", "part myself costs $7 in filament, and paying someone else", "be truth, and have even told some of the customers", "Even in the case of the latter, the cost of", "on injection molding. The mold price (for half the case)", "been repeating a common misconce...
[ "need them. Perhaps there is an alternate software that can", "straightener for example). I'm now trying to print an internal", "degrees of overhang) I have printed external threads like this", "the makerbot software but can't find a combination that will", "for an idea, a setting, or an alternate way of", ...
[ "M204 P3000.00 R3000.00 T3000.00 Recv: echo:Advanced variables: S=Min feedrate (mm/s),", "echo: M301 P26.15 I2.74 D62.35 Recv: echo: M304 P231.09 I45.21", "``` G0 F3600 X42.228 Y46.985 Z0.3 ``` Which you would", "I've got most everything calibrated and working with one exception.", "M200 D3.00 Recv: echo: M...
[ "10, 15... teeth for example) so I can use this", "shape (the white gear). Any idea why is this gear", "could print? I will be using this gear in a", "(the white gear). Any idea why is this gear design", "last days trying to make the best gears I could", "teeth for example) so I can use this STL file", ...
[ "this? I've never had this kind of issue before with", "only for infill, perimeters are just perfect. What can be", "pictures instead: [![enter image description here](https://i.stack.imgur.com/4A8Gn.jpg)](https://i.stack.imgur.com/4A8Gn.jpg) [![enter image description here](https://i.stack.imgur.com/76KNF.jpg)...
[ "a problem with my 3D print. Whenever I am printing", "at the bottom but not at the top. Checkout the", "symmetric at the bottom but not at the top. Checkout", "am facing a problem with my 3D print. Whenever I", "to the right hand side - it is symmetric at", "3D print. Whenever I am printing any object, t...
[ "a delta 3D printer kit for around $450. When I", "typically don't have Bowden extruders. I'm wondering what are the", "much about them, but I'm thinking of buying a delta", "Delta printers I found that they typically don't have Bowden", "of some disadvantages of Delta printers I found that they", "I foun...
[ "wonder why a glass plate, and if is possible to", "+ Glass? I wonder why a glass plate, and if", "Glass? I wonder why a glass plate, and if is", "directly in the aluminium plate adjusting the heating. [Link to", "plate adjusting the heating. [Link to the ultimaker](https://ultimaker.com/en/products/ultimak...
[ "or would it be better to use just one driver", "better to use just one driver and reverse the motor", "from the motor to the extruder assembly to actually drive", "to run a pair of drivers (one for each direction)", "assembly, allowing for quicker movement of the carriage on it's", "motivation for this c...
[ "be tuned out and you always knew that if the", "that he despised stepper motor systems, as every stepper based", "bunch of hacky software fixes to make the system perform", "work in the robotics industry, he told me that he", "the required level. He said that servo motor based systems", "based systems ha...
[ "deforming a little bit - only about breaking. If the", "shape of the opening I'm installing the net in and", "else will take too long to arrive. I don't care", "PETG available, anything else will take too long to arrive.", "weather and direct sunlight, the weather here is relatively hot", "after a year I...
[ "outside shape of the bell. After an application of Google-fu", "on to the question. Is there any tool or technique", "and subtracting the two. That should leave just the curve.", "the question. Is there any tool or technique to turn", "the curve. Then rotate\\_extrude the curve to generate the actual",...
[ "print some components. I am working with different aqueous (water)", "acid (H2SO4), hydrochloric acid (HCl), and hydrogen peroxide (H2O2), separately", "solutions containing sulphuric acid (H2SO4), hydrochloric acid (HCl), and hydrogen", "sulphuric acid (H2SO4), hydrochloric acid (HCl), and hydrogen peroxide...
[ "it is using a specific extrusion width and compensate for", "prints quite well, I am really surprised with quality of", "know this is related to extrusion width but cant the", "in order to get the diamter right? OBS: this printer", "that in order to get the diamter right? OBS: this", "I print it gets a s...
[ "color is some kind of warning, how do I fix", "and pink is..? If the pink color is some kind", "mean? Yellow is my model, green is support, and pink", "of warning, how do I fix it? [![Illustration from preview](https://i.stack.imgur.com/2PIRU.jpg)](https://i.stack.imgur.com/2PIRU.jpg)", "in Slic3r preview ...
[ "does not go through. I have searched everywhere online and", "go through. I have searched everywhere online and have found", "Whenever I try putting the filament through the nozzle it", "through the nozzle it does not go through. I have", "nozzle it does not go through. I have searched everywhere", "fila...
[ "in terms of strength properties, but stiffer. I don't have", "degrees of surround with 4mm thick arms - I think", "the moment, but I can provide one tomorrow when I", "considered a \"thin\" wall; currently, the clamp walls are 2mm", "apologize if this is in the wrong section, but it", "ABS in terms of st...
[ "a whole lot of support between the bore hole and", "layer and then insert the nut and, hopefully, the print", "my initial design. The strain gauge is one of a", "It's a major pain because, while a nut can be", "though, only about 1mm. Edit: I'll add an image of", "scales (from Lidl, €5.99. You can buy ea...
[ "for bulky parts for just printing the shell (PLA) then", "precision print a shell and fill it with 'something' -", "some kind of filler in to make up the bulk/strength.", "by line is slow and subject to warping! So I", "in some kind of filler in to make up the", "printing the shell (PLA) then pouring in ...
[ "results in a small plastic ball on the bed, impacting", "out of the nozzle, forming a small string at. When", "when my Prusa I3 is heating up, a small bit", "When the printing starts, this results in a small plastic", "up, a small bit of filament is coming out of", "small plastic ball on the bed, impacti...
[ "terms of ink? And what is the most permissive software", "small scale (height: 1-2 cm, width: 0.5 cm). [![Detailed 3D", "1-2 cm, width: 0.5 cm). [![Detailed 3D form#1](https://i.stack.imgur.com/Yd8Cl.png \"Detailed 3D", "I want to keep all the form's details. If it", "printer do you advise? How much does i...
[ "refer to regarding print resolution on the Monoprice Select Mini?", "numbers\" people refer to regarding print resolution on the Monoprice", "\"magic numbers\" people refer to regarding print resolution on the", "What are the \"magic numbers\" people refer to regarding print", "the \"magic numbers\" people...
[ "I cannot find any clear answers. How does a SolidWorks", "'converted' into a file format suitable for 3D printing, in", "a SolidWorks CAD file get 'converted' into a file format", "this matter however I cannot find any clear answers. How", "on this matter however I cannot find any clear answers.", "get '...
[ "using Slic3r. [![Photograph of first printed layer](https://i.stack.imgur.com/XD4AX.jpg \"Photograph of first", "of first printed layer](https://i.stack.imgur.com/XD4AX.jpg \"Photograph of first printed layer\")](https://i.stack.imgur.com/XD4AX.jpg \"Photograph", "I'm having an issue where the first layer of m...
[ "dissolve HIPS. Have you some advice to make the pieces", "HIPS as support material. Our principal issue is the weakness", "more gentle method to remove the HIPS? Thanks for the", "to print the robot Poppy. This is an open source", "the chemicals to dissolve HIPS. Have you some advice to", "robot Poppy. T...
[ "Anet A8 and it won't print. I will preheat it", "will preheat it (190°C 60°C) and then press \"`Print File`\"", "A8 and it won't print. I will preheat it (190°C", "second, gets to around 11% and stops and shows \"`Preheat", "it starts for a second, gets to around 11% and", "preheated - it is coming out o...
[ "broke up my electronics and now the output for X", "I broke up my electronics and now the output for", "for X is not working. The stepper is OK. There", "output for X is not working. The stepper is OK.", "is OK. There is any simple solution to remap the", "my electronics and now the output for X is not",...
[ "3D object (e.g. ink jet). I need at least 300dpi.", "I need at least 300dpi. Black in the first instance,", "but as the surface is rounded it's difficult to get", "in the first instance, but color would be nice for", "a good film to stick well. Is there any system", "3D printed object that I'd like to pr...
[ "I just want to make sure that I have the", "the basic configured correctly. What motherboard ID in [`configuration.h`](https://github.com/MarlinFirmware/Marlin/blob/1.1.x/Marlin/Configuration.h) is", "new printer, and I just want to make sure that", "and I just want to make sure that I have", "make sure th...
[ "structural parts, which form part of the frame, in PLA,", "cause for concern? So, from the above nuggets of information,", "very poorly even after his best effort at recalibrating the", "This kit is printed in two materials, the structural parts", "use for structural parts of a 3D printer, as opposed", "...
[ "an Arduino Mega2560 with a RAMPS shield. The Marlin firmware", "well as `M0`, but it does not switch it off.", "shield. The Marlin firmware came pre-configured from the store I", "printer, the LED on the bed turns on and it", "and it starts heating up. The manual control in Repetier", "firmware came pre-...
[ "to upload data to the 3D printer from a software", "Pronterface and put in the right port and baud rate", "printer. I've tried changing the baud rate and port in", "doesn't fully connect to the printer. I've tried changing the", "in the right port and baud rate that is in", "in the Asquine files and then...
[ "tiny balls on them. I am using 1.75 mm cheap", "1.75 mm cheap PLA bought from eBay and have also", "![Photos of squished prints](https://i.stack.imgur.com/9bEPO.jpg \"Photos of squished prints\")][1](https://i.stack.imgur.com/9bEPO.jpg \"Photos of", "squished prints](https://i.stack.imgur.com/9bEPO.jpg \"Pho...
[ "To control it I´m using the Repetier Host software with", "I already tried to increase the travel speed but nothing", "how to increase the speed of my nozzle to move", "control it I´m using the Repetier Host software with the", "homing position at 250 mm to the starting position of", "me how to increase ...
[ "carbon fibre rods (carbon tubes). Now, as per my previous", "height: 550 mm. > * Footprint: triangle, 270 mm width,", "I need?](https://3dprinting.stackexchange.com/questions/3965/for-a-larger-build-volume-what-lengths-of-2020-aluminium-do-i-need), is there a formula or ratio by which", "x 15 mm aluminium ex...
[ "Z to the height of the touch-plate, 12.6mm), which is", "touch-plate to do Z-probing, which works nicely for a single", "RAMPS1.4. We've just added a touch-plate to do Z-probing, which", "way to move the head up by the clearance amount,", "probe (I just want calibrated height for variant bit-lengths, not",...
[ "result is the same - the upper right part of", "nozzle of 0.4 mm, with a heat bed temperature of", "trying to print a calibration cube. The slicer is Cura", "of 0.4 mm, with a heat bed temperature of 60°C", "I'm trying to print a calibration cube. The slicer is", "hotbed. [![Photo of filament not adherin...
[ "on/off power supply. Is there a G-code to know the", "G-code to know the actual state of the power supply?", "and `M81` G-codes to power on/off power supply. Is there", "`M80` and `M81` G-codes to power on/off power supply. Is", "using `M80` and `M81` G-codes to power on/off power supply.", "a G-code to ...
[ "my heat shrink for the thermostat on my Anet A8", "way I can insulate my wires from heat but still", "but still have enough room to put the thermistor into", "I can insulate my wires from heat but still have", "heat block. Is there a way I can insulate my", "my Anet A8 melting from the heat block. Is the...
[ "with one rotation, and; * Start is how many starting", "smaller. However, is the minimum layer thickness not, also, dictated", "two starts to the screw, then the lead will be", "limiting factors. Of course, conversely, the use of a 2", "between a lead of 1, 2 or 8 mm -", "if there is only one *st...