Split (1)

train · 10.4M rows

ngram listlengths 0 10.5k
[ "which can print most of its own components. Assuming each printed printer will", "achieved? For example somebody printed for me printer and I do the same", "Assuming each printed printer will print the next one and so on. Are", "is a 3D desktop printer [RepRap](https://en.wikipedia.org/wiki/RepRap_project) w...
[ "scan the broken pieces in 3D and somehow just seal up the seam", "broken. Is there a scanning/printing/software system to do this that doesn't require a", "but could easily be 3-D printed. The latest such mishap is the volume", "a scanning/printing/software system to do this that doesn't require a lot of 3D"...
[ "a few kg of 3 mm filament when I only have use for", "mm filament when I only have use for 1.75 mm. How can I", "for 1.75 mm. How can I make 1.75 mm from 3 mm filament?", "kg of 3 mm filament when I only have use for 1.75 mm.", "I only have use for 1.75 mm. How can I make 1.75 mm", "when I only have use ...
[ "near-vertical overhang slope that isn't posing a problem for my printer. However, even", "tower-like projections that then join with a near-vertical overhang slope that isn't posing", "an MK8 extruder, at 210 degrees celsius, 60 mm/sec, sliced with slic3r. The", "jumps between the four towers in the print, l...
[ "out the different parts of the cell. My question is: what is the", "strong connection and not very visible when used well, and preferable dries fast.", "connect plastic 3d printed parts? Glue? Melted plastic? I need it to have", "I have so far: I managed to use different colors to print out", "a model of a...
[ "to re-use ABS or PLA filament material from printed parts? If so, what", "Is it possible to re-use ABS or PLA filament material from printed parts?", "it possible to re-use ABS or PLA filament material from printed parts? If", "filament material from printed parts? If so, what is the techniques to reform", ...
[ "°C for the rest of the layers. I have experimented with using ABS", "corners of objects lifting off the bed. My extruder is at 230 °C", "and frequently have issues with the corners of objects lifting off the bed.", "the adhesion to the bed was so good that the corners of the", "5 and frequently have issues...
[ "Taken from the [answer provided by @EricJohnson](https://3dprinting.stackexchange.com/a/60/47), When should I use a raft,", "the [answer provided by @EricJohnson](https://3dprinting.stackexchange.com/a/60/47), When should I use a raft, and when", "@EricJohnson](https://3dprinting.stackexchange.com/a/60/47), Wh...
[ "I made a test print for a small gear (~ 1.5 inches in", "print during the next run. The problem with this method was that some", "difference. Is there a way to continue using this tape without having it", "the next run. The problem with this method was that some of the", "I had to spend ten minutes scrapin...
[ "be used to smooth ABS prints. What safety precautions should be taken during", "can be used to smooth ABS prints. What safety precautions should be taken", "used to smooth ABS prints. What safety precautions should be taken during its", "to smooth ABS prints. What safety precautions should be taken during it...
[ "of achieving that with standard desktop printers without having to use multiple printers?", "longer time. So after finish, parts could be moved somehow out from the", "could be moved somehow out from the printing area, so the next can", "continuously (non-interactively), so I can leave the printer alone for ...
[ "left mine in the open for a year and have had no noticeable", "quality worse? I have left mine in the open for a year and", "filament, most distributors recommend storing the filament in an airtight bag. Does not", "Does not doing this actually make print quality worse? I have left mine", "actually make pr...
[ "I'm worried that 3d printed objects (FDM) would degas under high vacuum. Is", "is not important to me PLA/ABS/PC-ABS/nylon). I'm worried that 3d printed objects (FDM)", "fabricate a sample holder and shadow masks to use in vacuum chambers. The", "material is not important to me PLA/ABS/PC-ABS/nylon). I'm wor...
[ "before printing that can be easily broken off after they have been used", "ABS filament. The software I use will generate vertical supports for my objects", "normally fall. After breaking off the stints, the print is far from smooth.", "material that is best suited for \"sanding\" down prints without damagin...
[ "how strong a particular plastic (eg. comrpessive/tensile/shear strength) is when dealt with in", "strength requirements, due to its usages. I know how strong a particular plastic", "plastic (eg. comrpessive/tensile/shear strength) is when dealt with in a solid chunk, but", "but not when it is 3D printed. Wha...
[ "prints at the first layer speed. After the raft is finished, the first", "add a raft in Slic3r, the first layer of the raft prints at", "first layer of the print prints at the standard speed. How can I", "you add a raft in Slic3r, the first layer of the raft prints", "speed. After the raft is finished, the...
[ "32X stepper drivers. I'm thinking the RAPS128, Silencioso, and Trinamic drivers vs the", "I'm thinking the RAPS128, Silencioso, and Trinamic drivers vs the DRV8825, A4988 and", "have a high quality printer with a fast processor, will you see a", "high quality printer with a fast processor, will you see a not...
[ "a year now. Is there something I should be doing to maintain the", "had my printer for almost a year now. Is there something I should", "my printer for almost a year now. Is there something I should be", "I've had my printer for almost a year now. Is there something I", "almost a year now. Is there somethi...
[ "can help me with my cross-checking and selection? --- I have been using", "help me with my cross-checking and selection? --- I have been using an", "me with my cross-checking and selection? --- I have been using an [FDM", "3D printing](http://www.shapeways.com/materials/), are food-safe? Are there any certif...
[ "alignment between layers is very good, and the prints look very smooth. Suddenly,", "my printer has started producing prints that have a very pronounced layering. Normally,", "prints look very smooth. Suddenly, the prints have become much worse and the", "slicer settings/filament. I am printing on a custom-b...
[ "I am working on a robotics project and need to print some gears.", "wear off easily? PS: Newbie here... EDIT: According to my instuctor, it has", "it has to be some sort of plastic (not metal). It also has", "be some sort of plastic (not metal). It also has to be lightweight...", "on a robotics project...
[ "average. The main concerns I have are: * Skin reactions caused by prolonged", "compounds generated by the aforementioned material degradation Which materials can you recommend? *Any", "and bruising caused by friction Degradation of the materials due to prolonged", "a day on average. The main concerns ...
[ "Currently when printing in a 3D printer you would need to go through", "drive 5. Plug the flash drive into the printer 6. Print the model", "in a 3D printer you would need to go through these phases: 1.", "Create/Download a model 2. Prepare the model for printing with some 3rd party", "the flash drive into...
[ "with edible materials achievable by standard thermoplastic-like 3D desktop printer? Or you need", "desktop printer? Or you need to buy a special printer to do that?", "printing with edible materials achievable by standard thermoplastic-like 3D desktop printer? Or you", "I would like to print edible cookies o...
[ "plastic glasses. Is it safe to do it? Or bad for your health,", "glasses. Is it safe to do it? Or bad for your health, if", "fancy plastic cutlery sets or plastic glasses. Is it safe to do it?", "like to print fancy plastic cutlery sets or plastic glasses. Is it safe", "it safe to do it? Or bad for your he...
[ "my slicing software (Slic3r) some of the vertices/walls of my model seem to", "software (Slic3r) some of the vertices/walls of my model seem to have disappeared,", "so that the inside of the model - which should be solid -", "the inside of the model - which should be solid - is visible,", "seem to have dis...
[ "My question is, *which features are going to benefit a small-scale, new enthusiast", "that I don't know how to differentiate them. E.g. selling points include: ", "in designing & 3D printing as a hobby (e.g. printing chess sets, small", "printers, but beyond that I don't know how to differentiate them. E.g...
[ "I've heard that if you wire it wrong and plug it in, you", "I have step sticks, a heated bed, and a [Switching Power Supply 12v", "add which ones to the post). I've heard that if you wire it", "you wire it wrong and plug it in, you can do anything from", "are some tips of things to check before plugging it...
[ "is opinion based and/or broad, so pl add an answer to this point", "context of printing a basic 3X3 Rubix cube) --- Bonus: What are the", "printing process/to the raw material used? (Answer in the context of printing a", "and/or broad, so pl add an answer to this point as an extra", "basic 3X3 Rubix cube) ...
[ "volumetric speed Maximum speed speaks for itself, but how can I calculate the", "meant to give a constant filament pressure at the extruder, which I believe", "called \"[auto speed](http://slic3r.org/blog/new-stable-1.2.9)\" meant to give a constant filament pressure at the extruder,", "from two parameters: ...
[ "fine. So my question is: what is required to get thermocouples to give", "ends, to the heat block, the printer frame, the power-supply ground, and the", "jumped around by as much as 30C or more. In short, after several", "installed instead of the thermistors I had before. No matter what I did", "boards clo...
[ "used before it starts showing signs of wear? Parts list: 1x Complete set", "- 1.75mm 1x Hobbed bolt v1.1 1x Brass drive gear (Qare's compatible) 6x", "set of platics for Kossel Mini (PLA) 1x Kossel mini Extrusion set 1x", "6x Bearing 623ZZ 125x (1 pcs) Screw M3X8 Philips 125x (1 pcs) Washer", "of 12) 1...
[ "terms of the 3D printing process to make his prints more casting-friendly. What", "(<5% infill, 1 or 2 perimeters), burying it most of the way into", "process, but I'm asking about what he can do in terms of the", "the printed model used to take. There's plenty of room for improvement in", "casting? What m...
[ "and tear / printer maintenance costs. To clarify, I'm not asking how to", "printing, but rather how to calculate the actual cost after printing. Though predicting", "How do I determine how much an individual print costs? I'd like an", "/ printer maintenance costs. To clarify, I'm not asking how to predict ...
[ "- that question is about cutlery and glasses, not about things that go", "be able to withstand the heat of an oven or microwave, and not", "use PLA material with food and drinks?](https://3dprinting.stackexchange.com/questions/181/can-you-use-pla-material-with-food-and-drinks) - that question is about cutlery"...
[ "I set it too low, print times are doubled or tripled. What process", "without causing problems in my print? I'd prefer a process I can follow", "violently, especially during infill. If I set it too low, print times are", "the printer must accelerate and decelerate the print head. When calibrated correctly, t...
[ "getting clogged? Bonus question: What other common causes of clogs are there? (ie", "at least minimize, the extruder nozzle getting clogged? Bonus question: What other common", "not sure what's causing the clog, but my guesses are dust and/or burnt", "frequently have trouble with the nozzle getting clogged. ...
[ "success. However, I don't know if this will lead to damage to the", "time. The printer I'm using has a glass print bed, which I occasionally", "residue can build up. I've observed this in some printers, though not others.", "damage to the printer over time. The printer I'm using has a glass", "different de...
[ "print. This happens most often when the print has a large area in", "thermoplastic FDM printer has a heated bed and uses glass as the printing", "the glass will chip or break entirely when I'm removing my print. This", "most often when the print has a large area in contact with the", "My thermoplastic FDM ...
[ "custom pipes and tubes to regulate the flow of gas (a combination of", "small, as the entire experiment is designed on a small scale. I'd also", "science project, I'm 3D-printing some custom pipes and tubes to regulate the flow", "there's some unforeseen reaction between the gas and the pipes. The printer I'...
[ "my print material, i.e. ABS / PLA / Wood / Flex, How can", "material, i.e. ABS / PLA / Wood / Flex, How can I best", "out my extruder between them to ensure I don't contaminate my next print?", "often switch my print material, i.e. ABS / PLA / Wood / Flex,", "ABS / PLA / Wood / Flex, How can I best clean o...
[ "there something I can do to prevent these bulges in filaments from ruining", "on two spools I'm getting frustrated. One, right before a job was done.", "two spools I'm getting frustrated. One, right before a job was done. Is", "job was done. Is there something I can do to prevent these bulges", "bulges in ...
[ "time, but recently it has developed an issue where the temperature reported by", "have a strange issue with my heated bed. It has been working well", "using both the integrated 5V SMPS supply and an external USB supply. The", "relay. The mat is fixed to a 4mm thick aluminium plate. It seems", "cooldown (fu...
[ "around a 11mm bushing, and due to other design constraints, it has to", "the design of this part (bearing in mind that it absolutely has to", "of this part have to clamp tightly around the bushing in all directions.", "orientation) to make it more tolerant of my inaccuracy when removing supports, or", "(be...
[ "few different colors). The thing is, I have both PLA and ABS, in", "in small quantities. I originally intended to simply use each one separately, but", "that they could be mixed. If I recycle PLA and ABS together into", "them in the future for basic prototypes, so I'm not concerned with whatever", "PLA and...
[ "recycled powder degrades print quality to an unacceptable level. Mixing a little used", "used to fresh powder that still gives good results, and is there anything", "that still gives good results, and is there anything I can do (pre-", "a grain size of approximately 50 micrometers). During a print, a lot of"...
[ "will either will rip the tape, or break the print somehow. Currently using", "Usually it will either will rip the tape, or break the print somehow.", "the tape, or break the print somehow. Currently using ABS on a taped", "Currently using ABS on a taped glass bed with a layer of hairspray", "either will ri...
[ "the same printer, modified to use print beds of different compositions. Will the", "of different compositions. Will the material a bed is made out of affect", "cool. I could theoretically do this with several copies of the same printer,", "Let's say I print a part out of ABS and wait for it", "modified to ...
[ "1.75 mm and 3 mm? Does it really make a difference when printing?", "mm? Does it really make a difference when printing? Or is the 1.75", "have two standard filament sizes, 1.75 mm and 3 mm? Does it really", "Does it really make a difference when printing? Or is the 1.75 mm", "filament sizes, 1.75 mm and 3...
[ "[this](https://3dprinting.stackexchange.com/questions/264/when-to-use-1-75mm-vs-3mm-filament) question, is there any reason that you would not be able to", "possible if the nozzle diameter was greater than 1.75 mm but less than", "problems? Also, would using 1.75 mm filament be possible if the nozzle diameter"...
[ "especially at the edges of the bed. I've read [the question dealing with", "Something similar to BuildTak on top of an acrylic bed. (The sheet of", "unlabeled with the printer and I haven't been able to track down exactly", "in PLA on a non-heated bed. My question is: What is the best", "(Very similar to M...
[ "it would be economical to increase the throughput. A company that does use", "stereolithography has the same problem. Even though the photopolymer can be cured at", "With [fdm](/questions/tagged/fdm \"show questions tagged 'fdm'\") printers, the 3D object that should be", "problem, because they continuously ...
[ "There must be a trick to doing a good job of applying Kapton", "trick to doing a good job of applying Kapton tape on a printer", "on a printer bed plate… We built a Bukobot and even with a", "even with a great deal of care ended up with bubbles under the", "a great deal of care ended up with bubbles under ...
[ "the thermistor without damaging it. Note that the picture shows PTFE sleeving which", "not limited in temperature by epoxy or PTFE, * can withstand being disassembled", "of temperature) and the thermistor isn't locked in place any more (it still", "could easily use fibreglass in this situation as well. Anoth...
[ "supply, you have to use Electrical connectors of some sort to connect them", "╬ n/a ╬ ╬──────────────────╬──────────────────────╬─────────────╬───────────╬ ``` Not sure if I should use ring or", "of a standard PC cable with the female end cut off, and they", "0.5-1.5 ╬ 3.7 ╬ ╬──────────────────╬─────────────...
[ "on Earth. Are there any extra measures that needed to be taken to", "ensure that the filament would be correctly extruded onto the print bed, or", "filament would be correctly extruded onto the print bed, or during other steps?", "there any extra measures that needed to be taken to ensure that the", "from ...
[ "(PET) filaments? More specifically, I am looking for an alternative that does not", "part - such as using sandpaper - but rather works like acetone baths", "does not roughen the look of the part - such as using sandpaper", "such as using sandpaper - but rather works like acetone baths for ABS.", "rather wo...
[ "Common 3D printers (read \"cheap\") may be used to print masks for PCBs", "\"cheap\") may be used to print masks for PCBs (printed-circuit boards) which use", "printers (read \"cheap\") may be used to print masks for PCBs (printed-circuit boards)", "But can they be used to print PCBs which use SMD components...
[ "printer inaccuracy and shrinkage: * Adjust the space around joints in your CAD", "the final print are accurate and fit the other object? To my knowledge,", "print are accurate and fit the other object? To my knowledge, you at", "dimensional offsets in your slicer software Are there any good workflows one can...
[ "critical it is to get the ends of both nozzles exactly level with", "build plate at all times. Otherwise the lower one will crash against the", "and then run X and Y back and forth and eyeball and adjust;", "and eyeball and adjust; then move even closer to Z=0 and repeat. Is", "with each other -- that is, ...
[ "Makerbot Desktop offers an upgrade to v7.5 I'm not sure if it's a", "The printer comes with firmware v7.2 and while Makerbot Desktop offers an upgrade", "it seems to talk to Makerbot Desktop software I'm not sure if I", "it's a good idea with this non-Makerbot branded printer. I've also seen information", ...
[ "the existing answer I've asked a new question at [What makes Pronterface wait", "printer just stops, the UI looks like it's still printing but nothing is", "I couldn't find any settings that makes the problem better or worse, it", "trying to control the printer from the UI does nothing. It always stops", "...
[ "define the current position to be the 0/0/0 position? I'd like to move", "computer running pronterface. I can move each axis and also send g-code to", "position to be the 0/0/0 position? I'd like to move the printer into", "to move the printer into a position where I think should be the", "printer into...
[ "very precisely. So, what resolution is needed to print bricks that will connect", "equipment for their Lego minifig](http://www.fablabamersfoort.nl/en/node/534), using an Ultimaker. (Article is in Dutch, but", "using an Ultimaker. (Article is in Dutch, but accompanied by photographs). I noticed", "the tools ...
[ "about PETG being as easy to work with as PLA, but as strong", "work with as PLA, but as strong as ABS, and less brittle. Anyone", "strong as ABS, and less brittle. Anyone know if that's actually true, or", "saw some glowing claims about PETG being as easy to work with as", "glowing claims about PETG being ...
[ "the top of a vat of liquid photopolymer, causing it to harden. [CLIP](https://en.wikipedia.org/wiki/Continuous_Liquid_Interface_Production)", "is reportedly much faster (I've seen numbers as high as 100x). Why is", "ultraviolet light through the bottom of a vat of liquid photopolymer, causing it", "to harden...
[ "on my Pi just to change the infill, etc. I've searched <http://plugins.octoprint.org/> and", "when I change filament or models. It's annoying to have to edit the", "or models. It's annoying to have to edit the profile on another computer", "and update it on my Pi just to change the infill, etc. I've", "I c...
[ "your nozzle has taken a significant amount of wear. I've printed a few", "few hundred grams of glow filament personally and have not noticed any change", "[E3D-Online](https://e3d-online.com/blogs/news/are-abrasives-killing-your-nozzle) and [Make Magazine](http://makezine.com/2015/09/11/carbon-fiber-filament-r...
[ "to drill than others? What other methods also work for creating a hole", "if so, what are ways to avoid such splitting? Are higher speeds better,", "some post processing of my 3D-printed models that includes adding some holes. For", "such splitting? Are higher speeds better, or lower speeds, or should I only...
[ "out at a 45 degree angle. It seems that this causes problems with", "* What caused this problem? * How do I fix it? * How", "the nozzles on my printer, the filament comes out at a 45 degree", "printer, the filament comes out at a 45 degree angle. It seems that", "seems that this causes problems with adhesi...
[ "because it's another machine to build, which is cool, but also to save", "* Is the quality comparable to typical off-the-shelf filaments? Put another way, with", "can one produce filament that's good enough to use without a lot of", "on filament. Has anyone here tried to make their own filament? My main", ...
[ "my extruder when changing materials?](https://3dprinting.stackexchange.com/questions/233/how-should-i-clean-my-extruder-when-changing-materials), which is a nice addon read, but I", "statement true?): Should a certain cleaning procedure be carried out (removing swarf/shavings for", "necessary improved** (d...
[ "connect the switching power supply to a US AC outlet. The positive, negative", "is used to connect the switching power supply to a US AC outlet.", "that it can handle 10A, but beyond that I don't really know what", "the same gauge stranded cable, and I've heard that it can handle 10A,", "but beyond that I ...
[ "into the board (not all of them) and test them out? I'd like", "all of them) and test them out? I'd like to test out the", "to test out some of the components of a RAMPS 1.4 based 3D", "test them out? I'd like to test out the NEMA 17 motors without", "of the components of a RAMPS 1.4 based 3D Printer, can ...
[ "them all in together once I've summed the amps to make sure it's", "being pulled? Can I check a component at a time to make sure", "the amps to make sure it's safe to hook everything up. The amps", "amps are being pulled? Can I check a component at a time to", "I've summed the amps to make sure it's safe t...
[ "that they don't give you much detail about parts or how the wires", "the wires go in. Can someone provide me with some more detail on", "need to be [wired in parallel](http://reprap.org/wiki/Prusa_i3_Rework_Electronics_and_wiring#Motors_wiring) but beyond that they don't give you", "parts or how the wires go...
[ "buy a starter DIY kit and try to build your printer around it,", "it, or to order separate parts for printer, and then to combine a", "kit and try to build your printer around it, or to order separate", "your printer around it, or to order separate parts for printer, and then", "to build your printer aroun...
[ "I smooth 3D printed objects? What is the best / common method to", "How do I smooth 3D printed objects? What is the best / common", "smooth 3D printed objects? What is the best / common method to do", "3D printed objects? What is the best / common method to do this?", "do I smooth 3D printed objects? What ...
[ "a prolonged time, not only lasting the content of one syringe with molten", "enough in a molten, viscous state enough to print ? * Chocolate needs", "the molten chocolate to the extruder, which might be a valve that can", "lots of printers that print chocolate using a syringe with molten chocolate. But,", ...
[ "filaments. So, does wood filament cause damage to the nozzle? (under normal use,", "a normal quality brass nozzle - not some cheap stuff that didn't even", "nozzle? (under normal use, or at least what someone who only used PLA/ABS", "dark PLA can damage the printer nozzle, now I'm suspicious of all the", "...
[ "general 3D printers are compact and smaller than RP machines. That's ok. But,", "In general 3D printers are compact and smaller than RP machines. That's ok.", "3D printers are compact and smaller than RP machines. That's ok. But, what's", "machines. That's ok. But, what's the difference? 3D printers can be u...
[ "looking for some tools that convert the STL files into something that is", "found are really buggy and crash frequently as soon as one loads a", "into something that is easily edited, but so far all that I've found", "If not FOSS, what about just \"free or nearly free for hobbyists, ed,", "like to customiz...
[ "The RoBo 3D team have said that I just need to upgrade my", "long crack cutting it in half. The bed still works because it is", "I am unsure if the one sold on the RoBo 3D website will", "heating element works fine, and a replacement bed is 80$, and I am", "the heating element as well to explain the situat...
[ "nozzle into the build surface. Is there a way to configure Cura so", "and my printer's (Robo3D R1+) autoleveling feature works by pushing the nozzle into", "nozzle into it and my printer's (Robo3D R1+) autoleveling feature works by pushing", "is damaged by pushing a hot nozzle into it and my printer's (Robo3...
[ "SD Card) feed in filament, prime the printhead and/or change filaments without a", "printers have a menu to arrange all these tasks ? I often only", "amount etc. I understand this differs from printer to printer, but still am", "certain temperature, but not to load/unload filament, extrude a small amount etc...
[ "about this one.... Is it necessary to have both hot ends on same", "necessary to have both hot ends on same height? Why yes / why", "hot ends on same height? Why yes / why not? (if there is", "my printer, and I'm curious about this one.... Is it necessary to have", "it necessary to have both hot ends on sa...
[ "cannot seem to find a printer that can print multiple material with different", "internet and found various 3D printers with different advantages and materials which they", "that can print multiple material with different properties; for instance, simultaneously printing PLA", "different properties; for inst...
[ "sheet of paper from the bed in all corners is beyond the capability", "is of limited help and trying to figure out if the head is", "figure out if the head is the thickness of a sheet of paper", "a lot and it's mostly just trial-and-error. A normal bubble level is of", "Is there a good method or tool to le...
[ "of an axis slipping? I have tried cooling the motor which seemed to", "be the causes of an axis slipping? I have tried cooling the motor", "printer is a MendelMax RepRap, and the y axis is my moving bed.", "have tried cooling the motor which seemed to have been getting warm, and", "seems to be an intermi...
[ "a larger power supply, but at this point I'd rather just use the", "really long time for the heated bed to heat up using an MK2a", "larger power supply, but at this point I'd rather just use the parts", "too, for instance using a larger power supply, but at this point I'd", "of the bed? Do I need some extr...
[ "addition of automatic bed leveling with an inductive sensor and distributes heat a", "for the addition of automatic bed leveling with an inductive sensor and distributes", "an inductive sensor and distributes heat a little more evenly. When printing mostly", "to work with. Aluminium allows for the addition o...
[ "fairly accurate; would I see much of a difference if I went to", "extruder, and my prints seem to come out fairly accurate; would I see", ".3mm? What are the pros and cons of larger and smaller nozzle sizes?", "would I see much of a difference if I went to a .3mm?", "see much of a difference if I went to a...
[ "enclosure?** Here's an example filter setup: * This fan mount: <https://www.thingiverse.com/thing:780001> * 60mm", "air in an enclosure?** Here's an example filter setup: * This fan mount:", "More information on the chemicals 3d printing emit: * <http://built-envi.com/portfolio/ultrafine-particle-emissions-fro...
[ "a shield for an Arduino. So these are always two boards. The Arduino", "often or are the two boards just the predecessors of the one board", "as a single PCB. They have CPU and everything on just one board.", "the two boards just the predecessors of the one board solution? What are", "have CPU and everythi...
[ "Heat up the bed * Auto level * Raise the hotend a little", "the hotend and wait about a minute. So now I'm looking for a", "has an auto-leveling feature that works by touching the build plate with the", "G-code command to put at the end of the start G-code that will", "minute (that's the only part that is ...
[ "quick, but often comes out nicely (if anything, it was better before I", "telling pronterface to wait if a level was too brief, but that setting", "freely. And when the object is finished, the little top cube is bulging,", "is finished, the little top cube is bulging, rounded, and still soft to", "else can...
[ "seeing ARM chips in new electronics. ARM chips are said to be more", "I'm seeing ARM chips in new electronics. ARM chips are said to be", "in new electronics. ARM chips are said to be more powerful, but in", "chips in new electronics. ARM chips are said to be more powerful, but", "more powerful, but in wha...
[ "and accurate information. I tried creating an account on the site, but I", "deleted it because I couldn't find the way to hide my name (set", "page in a short time. I see some accounts that doesn't seem showing", "example, their name on profile equals to their account ID, or at least", "profile equals to t...
[ "been to run the entire length onto another spool, carefully avoiding cross-wraps, and", "print, then snipped the filament and started unspooling it, looking for more cross-wraps.", "aborted the print, then snipped the filament and started unspooling it, looking for", "(and maybe 4 hours into a 6-hour print),...
[ "which I have looked through. **So if the 3-D printer was able to", "was able to, but I have not been able to access the actual", "but I have not been able to access the actual 3-D printer for", "the printer on the website. The reason I ask is someone asked me", "printer(daVinci 1.0) had the ability to prin...