Datasets:
terryyz
/
stackoverflow_ngram_13

Dataset card Data Studio Files
xet
 Community
ngram
listlengths
0
10.5k
[ "or is it an underlying flaw of the model that won't be fixed", "the smart extruder constantly failing and needing to be replaced under warranty. Many", "are the initial issues with the Makerbot 5th generation's smart extruder generally considered", "of the model, but now, one year later, I'm unable to find a...
[ "perfectly before. It feels like stopping the flow even for about 30 seconds", "difference. I also tried few different filaments, all of them worked perfectly before.", "I have a Printrbot Simple Metal. The extruder is getting clogged all the", "PLA, and after a few minutes the extruder motor starts clicking ...
[ "makes for a nice finish, and any other experiences. **Caution!** [Chloroform](https://en.wikipedia.org/wiki/Chloroform) is a", "as I have an access to a well-equipped chemical laboratory with a [fume", "(or other solvents, as mentioned in [this](https://3dprinting.stackexchange.com/a/36/674) answer). This meth...
[ "are not aligned with one axis are also simple. Moving from x,y =", "assume the printer has 100 steps/mm on each axis, then a move of", "a curved move. So what is the algorithm to calculate the steps for", "move. And just calculating the amount of steps on each axis needed to", "Moving from x,y = 0,0 to 10,...
[ "printer? I've seen examples of Chinese companies printing entire houses, and I'm curious", "to printers / filaments that are intended (or at least able) be scaled", "of Chinese companies printing entire houses, and I'm curious as to printers /", "sourced / free is preferable; though I'm interested in **any**...
[ "But, I have enjoyed using it.) There is a plug-in available for SketchUp", "plug-ins folder. And, the tech guy at the library doesn't think that the", "it as an STL file. The process appeared to work. I could see", "will update all the copies of SketchUp at all the branches just so", "file not being recogn...
[ "remove support) it often leaves an ugly while mark where the removed piece", "connected. Sanding also tend to leave dull white scratches on the sanded surface.", "scratches on the sanded surface. What can I do to restore the white", "sanded surface. What can I do to restore the white areas to the", "tend t...
[ "used. My printer is a [Lulzbot Mini](https://www.lulzbot.com/store/printers/lulzbot-mini). The design illustrated below can be", "be used. My printer is a [Lulzbot Mini](https://www.lulzbot.com/store/printers/lulzbot-mini). The design illustrated below can", "printer is a [Lulzbot Mini](https://www.lulzbot.com...
[ "running the bed when the thermistor isn't working, to avoid unlimited overheating). I", "/ Bed, for First layer and Other layers (and groups of settings can", "without it. I don't get how multiple sources of control relate to each", "also has a menu/fill-in labelled \"Bed\", which works fine to adjust the be...
[ "\"Print support structure\", is there a way to see what it will look", "when you enable \"Print support structure\", is there a way to see what", "Cura, when you enable \"Print support structure\", is there a way to see", "enable \"Print support structure\", is there a way to see what it will", "support st...
[ "a higher temperature. I think that our heat sensor is not working properly.", "have a class in the computer lab and one of our focuses is", "not heated (using Build Tak). This has worked very well in the past.", "I think that our heat sensor is not working properly. Does anyone know", "when the extruder go...
[ "haven't managed to finish one! Well... this hotend has a 1.5mm hole so", "with or without fans, haven't managed to finish one! Well... this hotend has", "I would like to buy a new, more precise, hotend. I'm using a", "I'm using clogged the hotend after two minutes. Now I would like to", "(about 40 minutes)...
[ "that a lower powered laser would have to travel slower but going too", "some lasers attached to the RepRap platform for cutting but most seem to", "merely etching. If I were wanting to build a platform for cutting wood,", "paper, balsa wood, or merely etching. If I were wanting to build a", "would I need f...
[ "slowing down the print head help? Does increasing/decreasing the extrusion diameter, or layer", "Does lowing the temperature help? Raising it? Does speeding up or slowing down", "without adding support material. What modifications can I make to improve how steep", "overhang my printer can print before it sta...
[ "Maybe you have some links for this kind of stainless-steel tips? Or some", "cannot find any tips to buy separately. Maybe you have some links for", "a stainless steel tip for it to fix it inside hotend with a", "thermistor in a more reliable way (now it is just thermistor plugged in", "approach as used for...
[ "picture). I have already tried the obvious, which is removing material from the", "the 3D printing. Thanks for your patience :) EDIT: Lubrication: I plan to", "to check how they move. [Click here for the SolidWorks parts and assembly", "semicircle and not inside its belly (you can see it in the picture).", ...
[ "in Tinkercad, the object appears two inches wide (in cm). The security on", "I see errors in the object. It seems like there are issues with", "now at the library with the technician.) Here is a screenshot of what", "Plus). (I am now at the library with the technician.) Here is a", "the STL file at the net...
[ "settings into a file (like Json formatted)? ``` CuraEngine.exe -v -o \"c:\\3d\\test.gcode\" \"c:\\3d\\test.stl\"", "settings to CuraEngine? Is it possible to put all these settings into a", "way to give printer settings to CuraEngine? Is it possible to put all", "possible to put all these settings into a fil...
[ "actually 2.85 mm) filament extruders have some kind of gear reduction. Many 1.75", "extruders have some kind of gear reduction. Many 1.75 mm extruders are direct-drive", "direct-drive / ungeared but some do use gears. What kind of reduction ratios", "kind of gear reduction. Many 1.75 mm extruders are direct-...
[ "in my 3D printer however I am having no luck in converting this", "I had a friend request that I print out the Bathymetry of Lake", "thin mesh that looks nothing like lake Michigan -Just for a test, I", "After I import it, I get no errors but the output is a", "into a printable mesh that I can manipulate t...
[ "get lumps of charred filament deposited on my object. The slicer I used", "stick to the raft. Does any one know how to mitigated PETG from", "Travel -> Elevation settings. I have noticed that this helps but then I", "deposited on my object. The slicer I used is Craft Ware and I", "is Craft Ware and I have ...
[ "and the leading rods seem perfectly fine and should be able to allow", "a level). It is from an old experimental lab doing physics or chemistry.", "get's stuck on either sides of this way. Both driving threaded rod and", "about 5 cm, but then it get's stuck on either sides of this", "makerbot one's (thread...
[ "the axis and the print bed again. So two motors seem more like", "on the other side that is connected to the motor axis with a", "seem more like an disadvantage to me. Could someone please shed some light", "motors. And after playing around with a two motor model, I find it", "the [Prosi i3](http://reprap....
[ "for the basest of n00bs when it comes to 3D parts creation? I", "need something lightweight. tl;dr: Seeking a free, lightweight program to create .stl files", "once and made some headway but the next time I turned my computer", "Ideally, I'd like a program that uses those strengths but I realize that", "op...
[ "My Kossel came without instructions, I was given a set of instructions by", "the build guides. The question is how these components fit together. I'm pretty", "images with a component like (1). But nothing on how this and the", "together. I'm pretty certain the stepper motor should be connected to the big", ...
[ "I've had no luck getting useful vectors out of them. I've tried vectorizers", "had no luck getting useful vectors out of them. I've tried vectorizers in", "only on paper. Scanning them to bitmaps is easy, but I've had no", "and a few online services. Generally, I end up with enormous numbers of", "What too...
[ "I'm building a 3D printer and I've been looking around for materials suitable", "I don't have any metal-cutting machine tools. Can aluminium beam be cut by", "I have occasional access to a laser cutter which I could use to", "T-slot beam kits. I don't have any metal-cutting machine tools. Can aluminium beam"...
[ "dirt. Is it worthwhile to protect a circuit board with a 3d printed", "case can protect the main board from dirt. Is it worthwhile to protect", "PLA is flammable, but a good case can protect the main board from", "board from dirt. Is it worthwhile to protect a circuit board with a", "flammable, but a good ...
[ "drag? What other variables can I expect to look out for? *Machine:* **MakerBot", "eat away at the side of the filament. I eventually assumed it was", "allowing the drive gear to continue \"trying\". My solution was to hang my", "extruding for one reason or another and the drive gear would slowly eat", "fil...
[ "other two directions, because it relies on the cohesion between the layers. [![enter", "the reason for this. It's because I'm printing in the orientation shown below,", "below, in order to avoid the need for supports. (This will be more", "all what the design looks like, except that as much of the vial", "...
[ "filament that will be soft to stand on: <http://recreus.com/en/> I do not currently", "a printer. How can I measure her feet and transfer the measurements to", "feet and transfer the measurements to the printer? (one of these comes to", "insoles for my wife. This company makes a flexible filament that will b...
[ "6mm high) which i would need to mount the E3D V6 clone I", "mount it to the horizontally moving x-y drives. As I cannot print yet,", "Are there some completely different ideas around which I didn't think of yet?", "the DVD drive but a) there is almost no space for that, and", "print yet, it needs to be man...
[ "saved money on buying the printer, buying models and then printing the models,", "buying models and then printing the models, compared to buying something alike in", "have a 3D printer, would you say that you have saved money on", "models, compared to buying something alike in retail? Would you say that savi...
[ "curious about the various UV/Laser printers in (or coming into) market that use", "* Variances in material quality (i.e. diameter, purity, physical conditions) * Mechanics of", "into) market that use liquid resin. I've seen the samples of the [Pegasus", "types of printers as with FDM/FFF? Here are some thing...
[ "had the full G-code on my computer, and decided to try and resume", "full G-code on my computer, and decided to try and resume the print", "does it look good, and my problem is probably the nozzle? ``` ;FLAVOR:UltiGCode", "seemed to work, with the exception of a little excess extrusion at a", "at a single ...
[ "this how its supose to be if not what do I need to", "adjusted my z axis end stop via the paper test. However when I", "the paper test. However when I press to home all the axis the", "the print bed moves it down slightly then goes to the postion I", "axis end stop via the paper test. However when I press ...
[ "I'll probably try it at some point just to see what happens, but", "to print several copies of a large, flat object, such as a hollow", "to to print several copies of a large, flat object, such as a", "then my 3D printer's software happily generates supports for the upper objects to", "than printing them a...
[ "Supply Documentation](http://reprap.org/wiki/Power_Supply#OEM_type_PSU) which reads: > > In the US, IEC320 C14 plug connections", "Documentation](http://reprap.org/wiki/Power_Supply#OEM_type_PSU) which reads: > > In the US, IEC320 C14 plug connections are", "[this rocker switch](http://rads.stackoverflow.com/a...
[ "or where exposed to oil > at a temperature not exceeding 60°C or", "> > > I'd like to be able to hook up RAMPs 1.4", "Internal wiring of appliances; or where exposed to oil > at a temperature", "is applicable.. > Tags may indicate the following: 600V Peak - For Electronic", "at a temperature not exceeding ...
[ "folger tech off of ebay. I've built it and even printed out a", "up the x carriage. I don't know if I got a bad nut,", "the z motor to push up the x carriage. I don't know if", "or is it's just supposed to be this way? I thought it was", "could notice that seemed to be loose was that nut that allows the", ...
[ "am I doing wrong here?[Triffid Hunters Calibration](http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide) is the guide I have been", "98 When I did my first measurements I used 120mm as the mark", "less accurate it gets. What am I doing wrong here?[Triffid Hunters Calibration](http://reprap.org/wiki/Tri...
[ "board storing the firmware degrades a little, each time you write to it.", "this point I'm just wondering if an expert might see this and relieve", "electrons. The electric field of the > trapped electrons adds to the electrons", "of my head that electrically programmable ROM like what must be on the", "ho...
[ "is likely to cause issues. > > > I have retraction set to", "the slack. Is the 2 mm a conservative rating (I guess they don't", "problems) or is it really the maximum? Is there anything else I can", "and blobs. My printer is set up with a relatively long Bowden tube", "clogging problems) or is it really th...
[ "on Thingiverse). Is this a software issue (Simplify3D) or a hardware issue? Can", "direction on separate runs of the same piece (which is just a poker", "direction and in the negative Y direction on separate runs of the same", "is just a poker chip I found on Thingiverse). Is this a software", "Can anybody...
[ "I have noticed that once in a while stepper motor jumps back for", "feeder of my UM2. Inspecting it I have noticed that once in a", "while stepper motor jumps back for few steps. I have an idea of", "a while stepper motor jumps back for few steps. I have an idea", "want to hear what you can think of. That ...
[ "have to take to get from pellets to a full spool of filament.", "factories that produce filament have to take to get from pellets to a", "to get from pellets to a full spool of filament. Which of these", "in the production process that factories that produce filament have to take to", "Which of these steps...
[ "have a long 8 mm smooth steel rod of about 55 cm long.", "This rods bend easily due to the length. If I replace them with", "Will the bearings wear off the carbon fiber rod? I couldn't find too", "8mm solid carbon fiber rods, will the bending reduce? Will the bearings wear", "solid carbon fiber rods, will ...
[ "bearings, if anything at all, - grease on the 'more fluid' side for", "sinter bearings, if anything at all, - grease on the 'more fluid' side", "but not only, written here <http://reprap.org/wiki/Lubrication>, I know that one should: - use", "have the slightest idea about lubricants, I would not know what to...
[ "am relatively new to 3D printing -- Am I missing something I should", "with supports. I am relatively new to 3D printing -- Am I missing", "reason for this? I printed one part last night and simply rotated the", "45 degrees. Brackets, tubes, everything I have seen so far. Is there a", "deal with supports. ...
[ "this following first picture, I attempted with a 240°C tip and a 150°C", "a 150°C bed\") [![220°C tip and a 50°C bed](https://i.stack.imgur.com/IaF8Z.jpg \"220°C tip and a", "ABS on the base plate (just as you would do when printing with", "one side actually looked somewhat decent while the other clearly had...
[ "be several layer of this on top of each other and the shape", "top of each other and the shape would be kind of carved out", "whole model would be within 30 \\* 30 \\* 10 cm, the honeycomb", "can use to generate honeycombs like this, or do I have to write", "to reality check it for me. Basically what I wan...
[ "file from Tinkercad as any of these: ``` .STL .OBJ .X3D .VRML ```", "Tinkercad as any of these: ``` .STL .OBJ .X3D .VRML ``` Is there", "any of these: ``` .STL .OBJ .X3D .VRML ``` Is there a way", ".X3D .VRML ``` Is there a way to convert any of those file", "Is there a way to convert any of those file typ...
[ "printing and need to know if I use steel in printing, do I", "need to know if I use steel in printing, do I get the", "printing, do I get the same strength (compression and shear) as steel profiles", "to 3D printing and need to know if I use steel in printing,", "am new to 3D printing and need to know if I...
[ "was wondering, can the whole model just be printed as a solid object,", "right thickness. So, I was wondering, can the whole model just be printed", "whole model just be printed as a solid object, with 100% infill, and", "that it needs to be 3\" tall and the walls have to be", "prepare a 3D model for 3D pr...
[ "a way to make all your prints seamless?? I know there was this", "z axis making it seamless. Why cant this be done with regular prints?", "a vase constantly changing the z axis making it seamless. Why cant this", "program that printed a vase constantly changing the z axis making it seamless.", "was this pr...
[ "the G-code. What could be causing this? I'm printing from an SD card", "very slowly moving back to its original position and resuming the print as", "the way to the left/front, before very slowly moving back to its original", "moves: it will very slowly move either the X or Y axis all", "moves are definite...
[ "down the learning road with two broken printers that I'm rebuilding with better", "likelihood that any hotend or heatbed that has had the thermistor/thermocouple and/or the", "constants from experimental data isn't perfect. IMHO, any hotend/heatbed temp on a DIY", "print quality. Is there a good visual or ex...
[ "x-axis shift, and I need a tension gauge belt to measure the tension.", "is going crazy with x-axis shift, and I need a tension gauge belt", "one would be the right fit. Any ideas? What things should I look", "a 3D printer that is going crazy with x-axis shift, and I need", "I can't tell which one would be...
[ "it has, should I be using the speakerwire instead? That isn't listed in", "a forum somewhere in which people were complaining about the cheapness of the", "any information in regards to the insulation type or quality and this makes", "me to believe that the cheapest grade of insulation was used; as I", "pr...
[ "pressure from the strongly clamped glass plate be enough or will the glass", "a Prusa heatbed PCB? If so, can I apply the heat by the", "utilize an oven? Will the pressure from the strongly clamped glass plate be", "PCB? If so, can I apply the heat by the heatbed itself, or", "mm with respect to all edges....
[ "the food-safe materials and how do I recognize them?](https://3dprinting.stackexchange.com/questions/147/which-are-the-food-safe-materials-and-how-do-i-recognize-them) please read** I need", "read** I need to know if [this 3D Ink™ (PLA Filament)](http://store.printm3d.com/#filaments_head_scroll) is food", "**B...
[ "elements will turn off. Pressing the reset button on the RAMPS restarts the", "bad, but is there anything else I should check before I buy a", "is the power supply (12V 30A) is going bad, but is there anything", "it has been randomly stopping during prints. The LCD screen will lock up,", "I replaced the po...
[ "the pixel-wise mapping has not been done uniformly. (View <http://s24.postimg.org/p7w09zvkl/snippet.png> for the image).", "have been using Solidworks and AutoCAD to create STL file of a 3D", "be represented by exactly the same set of pixels in the bmp image,", "bmp image, so that all of the circular contour...
[ "outcome of the rendering. But in my case this makes some parts unable", "somebody knows how to do this I've been searching and asking around for", "all STL files which I've learned so far are hard to edit and", "on Thingiverse but they are all STL files which I've learned so far", "for one to another progr...
[ "It worked fine in plastic, but when we tried it with bronze filament", "is supposed to be a bead for a beaded necklace. It was exported", "who operates the printer says that most, but not all, of the models", "in bronze have a border around them when they print, and this one", "y axes, and 3 on the z axis ...
[ "that's marked `VR1`; what does that do, and does it work similar to", "On my [Switching Power Supply](http://rads.stackoverflow.com/amzn/click/B007KG0ZYI) there is a little orange trimpot that's marked", "what does that do, and does it work similar to the ones on", "a little orange trimpot that's marked `VR1...
[ "for the Rev E was a 24 V/9.2 A which was necessary for", "V/9.2 A which was necessary for the dual extruders and heated bed. I", "supply. The power supply for the Rev E was a 24 V/9.2 A", "heated bed. I know I need a 24 V power supply, but should", "should I be concerned about the amperage? What will a hig...
[ "3 mm - is there any way to shave off the excess and", "is there any way to shave off the excess and use it as", "mm filaments seem to actually be 3 mm - is there any way", "be 3 mm - is there any way to shave off the excess", "there any way to shave off the excess and use it as 2.85", "actually be 3 mm -...
[ "hot at the time. I had the heat bed unscrewed from the chassis", "and, of course, the heat bed won't heat. Can this be salvaged or", "sure how it shorted but I think it shorted between the power lead", "the heat bed was not hot at the time. I had the heat", "I had the heat bed unscrewed from the chassis bu...
[ "suggested that filament costs are asymptotically approaching a baseline cost - others that", "asymptotically approaching a baseline cost - others that costs are linearly decreasing. Does", "a single class of filament over the past decade or more? Part of", "filament costs are asymptotically approaching a bas...
[ "a numerical solution for this question, but maybe there is an option to", "I haven't seen in any slicer an option to export as .stl or", "how much infill percentage affects the stiffness of the part. I know that", "this question, but maybe there is an option to simulate in software an", "export as .stl or ...
[ "that communicates directly with the RAMPS board (or any other 3D printer driver)", "matter if it runs on Windows or linux as long as it's opensource.", "the RAMPS board (or any other 3D printer driver) without using the arduino...", "communicates directly with the RAMPS board (or any other 3D printer driver)...
[ "do FDM. The item has a ball valve. and the ball ~ 1.6-1.9mm", "figure showing the direction of air flow. Update: Thanks both answers are helpful.", "clearance of 0.1mm is used ](https://i.stack.imgur.com/0neFf.png)](https://i.stack.imgur.com/0neFf.png) Update: [![Figure explains the direction of air](https://i...
[ "can animate the way the .stl object will be printed? I'm not talking", "the given object as an animation. I know it somehow depends on your", "be printed? I'm not talking about what the end result looks like. I'm", "you can animate the way the .stl object will be printed? I'm not", "end result looks like. ...
[ "after a couple straight hours of prints. I am guessing that there is", "a design flaw and that the media is melting inside the extruder before", "of prints. It is a couple months old, and the tip stops extruding", "is melting inside the extruder before the feeding teeth. Does anyone have experience", "the ...
[ "talks about it, has already some basic knowledge about the topic. What are", "of a \"reserved\" topic. Meaning that everyone who talks about it, has already", "topic. What are some good resources for someone who wants to start learning", "start learning from zero? My main goal is to acquire enough knowledge ...
[ "is horrific. Blocky as hell. Right now the encoding is set up at", "quality out of my time lapses generated by OctoPrint. I'm using the Raspberry", "with a Pi 3. I've already edited the Octopi config to get 720p", "time lapses generated by OctoPrint. I'm using the Raspberry Pi Camera Module V2", "the Octop...
[ "slurry) * Prevent air draft. I've added acrylic panels to the sides of", "ensured the following conditions regularly: * Build plate is level * Base of", "(I live in NW USA, so the ambient temperature is typically fairly cool).", "and the machine is in a custom cupboard. * Nozzle temperature at about", "man...
[ "filament gets hot, it melts and bends and curls which makes it NOT", "the heater. The top of that (above the white arrow) is inside the", "filament, it is always twisted in a spiral (helix) shape like a corkscrew.", "new PLA filament and am getting frequent clogs in my extruder. I've had", "ABS, but the AB...
[ "one by one they break loose from the build plate. As they get", "tiny they don't have much area in contact with the bed, so they", "since I had gone to dinner it kept printing... see below. I think", "with several settings, got it to come out pretty well. Thanks to all,", "got it to come out pretty well. T...
[ "got on the cheap from eBay. It works just fine. I bought a", "Does anyone have good settings (Slic3r) to use with this stuff? Or any", "(Slic3r) to use with this stuff? Or any other advice for getting a", "- 78°C bed). Prints always either curl up from the bed after 5-20", "various cooling fan settings. Do...
[ "I am printing at 40 mm/s and 0.2 mm layer height. If someone", "am still getting some layer separation. I used 235 °C for the extruder", "help with the warping some but I am still getting some layer separation.", "with the warping some but I am still getting some layer separation. I", "a lot of warping and...
[ "+ hall sensor) end stops. Are there any differences in how exact they", "there any differences in how exact they switch at the right location? If", "and magnetic(magnet + hall sensor) end stops. Are there any differences in how", "switch), optical and magnetic(magnet + hall sensor) end stops. Are there any d...
[ "in removing items from the bed. It seems to me like I'd want", "have in removing items from the bed. It seems to me like I'd", "design work from the things I'd like to make, but I have a", "because of the difficulty some have in removing items from the bed. It", "and printers? The reason I ask this is beca...
[ "are: 1. What glue is best for PLA plastic? 2. What glue is", "best for ABS plastic? 3. Is there a glue that functions with both", "On my 3d printer's (XYZ) retailer's site, it costs \\$20 (USD). Due to", "a green tombow PITS adhesive stick. On Rakuten, it costs \\$1 (USD). On", "to get a green tombow PITS ...
[ "I can even turn the printer fan on/off, move the extruder, etc. through", "even turn the printer fan on/off, move the extruder, etc. through OctoPrint: [![enter", "description here](https://i.stack.imgur.com/qyeCZ.png)](https://i.stack.imgur.com/qyeCZ.png) But when I press the blue \"Print button\", there is n...
[ "concern is a possible interference between the small magnetic field that is created", "the magnet, and the sensor when probing the plate. I fear this question", "P.S. I would also like to note, in case there is any relevance,", "aluminum build plate (since aluminum is not magnetic). I would like to know", ...
[ "the back of the printer towards the front. The extruded lines look uneven", "hand side, while the right is okay. [![Left hand side of the print", "is a recent print that shows this happen. The pieces were printed side", "the left hand side, while the right is okay. [![Left hand side of", "the surface is qu...
[ "made of cellulose or other recyclable and bio-degradable material? Or do you know", "the heavy use of glue. Is anywhere filament available, which is made of", "do you know if research is going on in this area? edit: added", "and glued. Like the ones [Staples](http://www.gizmag.com/staples-mcor-easy-3d-printi...
[ "wondering if anyone knows a good open source which they have used with", "find any reliable open source project which I can get to work. [SLStudio](https://github.com/jakobwilm/slstudio)", "structured light 3D scanner using single camera, light projector and a turntable. After", "source project which I can g...
[ "else has had the same experience for cross reference. What's the underlying issue?", "same error occurred, I then swapped the other thermocouple and put it in", "all. If I quickly go to monitor mode it shows tool 0 temperature", "tech support but wanted to see if someone else has had the same", "don't thin...
[ "a steel print bed made so it would tend to stay flat. Has", "of my print bed is warped down. I am thinking about having a", "Flashforge Creator Dual. One corner of my print bed is warped down. I", "print bed is warped down. I am thinking about having a steel print", "print bed made so it would tend to stay...
[ "would like to print from one material in two colors or from different", "new printer with dual extruder. Is there some way how to measure and/or", "to create 3d model - ask the seller(s) to print it - and", "use Prosi i3 with one extruder for some years and I would like", "with dual extruder on the market?...
[ "model rendered with Blender: [![enter image description here](https://i.stack.imgur.com/N1cVF.png)](https://i.stack.imgur.com/N1cVF.png) If I throw it at", "Blender: [![enter image description here](https://i.stack.imgur.com/N1cVF.png)](https://i.stack.imgur.com/N1cVF.png) If I throw it at a commercial printing"...
[ "corners of the bottom bent up, making the whole base rock when set", "of the bottom bent up, making the whole base rock when set on", "the corners of the bottom bent up, making the whole base rock when", "the bottom bent up, making the whole base rock when set on a", "for a model, but the corners of the bo...
[ "I know that the SLS 3D printer stands for selective laser sintering,where as", "laser sintering,where as DMLS stands for direct metal laser sintering. I want to", "know that the SLS 3D printer stands for selective laser sintering,where as DMLS", "SLS 3D printer stands for selective laser sintering,where as D...
[ "v6 hotend and I am installing it on the open source design of", "I am installing it on the open source design of a Prusa i3.", "do I clean my hotend after each print and after using different filaments?", "Prusa i3. How do I clean my hotend after each print and after", "on the open source design of a Prusa...
[ "at this temperature will increase wear on the thermistor and increase my chances", "I have a FlashForge CreatorX (MakerBot clone) that's been working fine for about", "thermistor and increase my chances of clogging PLA in the gear (an issue", "\"thin\" layers in some of my ABS prints. I finally tracked the i...
[ "problems I had with prints detaching from the buildplate during printing. However, it", "much and just not detaching from the build plate. I'm specifically not asking", "opposite problem of prints sticking too much and just not detaching from the", "sticking too much and just not detaching from the build pla...
[ "3D printer available today? I am looking for something suitable for general use", "printer available today? I am looking for something suitable for general use in", "What is the least expensive 3D printer available today? I am looking for", "I am looking for something suitable for general use in a home offic...