ngram listlengths 0 10.5k |
|---|
[
"latest release (as of 20 January 2018) * PETG from Das Filament I",
"1.1.8 * Bed auto leveling before each print * Slic3r Prusa Edition, latest",
"big deal, but it's annoying because it's stopping the part of having a",
"the nozzle starts fading out as it comes closer to the point of",
"layer of a cube. Th... |
[
"to accomplish this? I am currently using Cura. It seems that the support",
"accomplish this? I am currently using Cura. It seems that the support material",
"the first layer, what is the best way to accomplish this? I am",
"what is the best way to accomplish this? I am currently using Cura.",
"am trying to... |
[
"to be both telemetry, and RC controlled. That cylinder should allow the signals,",
"is transparent to radio waves. I want to place my transmitter in a",
"my transmitter in a cylinder. That cylinder would be placed in a big",
"That cylinder should allow the signals, should be strong and light. So which",
"w... |
[
"steps:0, Printing Temp:240 C, Build plate Temp:65 C, Diameter: 2.85 mm, Dimensions of",
"to my problem. Printing quality dropped when i try to write vertical axis",
"I am a beginner in 3D printing field. I read couple of answers",
"to write vertical axis (i mean, columns). There is no problem in horizontal",... |
[
"tweek stepper settings (M501,M92xxxx, M500) Live Die Repeat... When I now print the",
"I get X25mm, Y20mm & Z19.5mm. Could the issue be with the firmare",
"the firmare being upgraded to Marlin? The cube was sliced by Cura and",
"printer, Github Marlin, Repetier Host, Cura slicer Just setting up printer and p... |
[
"layers I think that covers everything, Let me know if I need to",
"first layer, I am doing 60 mm/s, just like the rest of my",
"dia. --> 0.4mm * Nozzle temp --> 210°C * Print speed --> 60",
"a good speed to print at for the first layer, I am doing",
"make that much of a difference? So other than that I don... |
[
"fan at 30% power ``` Can somebody suggest me how to write commands",
"= 'COM4' ser.baudrate = 38400 out = ser.readline() ser.write(b'M106 T14 S30\\n') %This is",
"to write any commands to it Here is the code: ``` ser =",
"at 30% power ``` Can somebody suggest me how to write commands to",
"= 38400 out = se... |
[
"happening to my motor. Any suggestions would help. 1. I have tried adjusting",
"here](https://i.stack.imgur.com/xE1dA.gif) This is what is happening to my motor. Any suggestions would help.",
"my motor. Any suggestions would help. 1. I have tried adjusting the trimpot.",
"the connector to match the one on th... |
[
"to guessing). My question is, how far at 90\\* from a wall can",
"edges hanging out the side. I always worry, since it is printing in",
"print. But I was able to go, maybe 1mm(I am not to good",
"note. I am printing out things for people and some files have some",
"hanging out the side. I always worry, sin... |
[
"the glass, with blue painters tape it sticks even too much so I'll",
"a 0.4mm diameter nozzle at 0.2mm height at: 50°C(122°F) heat-bed and 214°C(417°C) hot-end",
"totally) was to bump up the layer thickness to 0.3mm [Edit 2] Finally",
"and my white eSun. **What's my problem?** Thank you all! [Edit] Tried abo... |
[
"settings\" ok echo:Unknown command: \"okechecho\" ok ``` The \"SD init fail\" line and",
"first attempt to get access to low-level printer interface looked like that: ```",
"(mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s),",
"``` First it was fine: i've entered g-c... |
[
"is called. For example there is a strap on the model for the",
"have found something called \"ghosting\", or at least I heard that is what",
"that is what it is called. For example there is a strap on",
"left and right there is very shallow \"straps\" or something happening. I am",
"shallow \"straps\" or s... |
[
"The extrusion temperature is set at 190 °C for PLA but the temperature",
"set at 190 °C for PLA but the temperature never quite gets that",
"°C. So the printer never prints. The bed temperature is fine. Any suggestions",
"never prints. The bed temperature is fine. Any suggestions on how to fix?",
"A8 with ... |
[
"(read single extrusion) or do I need to use a single extrusion head",
"purpose printing (read single extrusion) or do I need to use a single",
"to 3D printing and I recently got a LulzBot Taz 6 printer. I'm",
"to use a single extrusion head for single extrusion print jobs. If you",
"new to 3D printing and ... |
[
"PC4-M6 Fittings for 3D Printer 1.75mm Filament (2.0mm ID/4.0mm OD)\"* Anybody know how",
"OD)\"* Anybody know how this is fitted? Is it simply tapping the feed",
"an extruder mod on Amazon *\"EAONE 2 Pcs PTFE Teflon Tube (2 Meters)",
"extruder mod on Amazon *\"EAONE 2 Pcs PTFE Teflon Tube (2 Meters) with",
... |
[
"getting it to line up with the whole is a nightmare. Can the",
"alter the fan so I can see the filament when I am loading",
"doable. I am now trying with PLA and getting it to line up",
"nightmare. Can the driving cog and guide wheel be moved? A couple of",
"ABS and took the advice to alter the fan so I ca... |
[
"running on ramps 1.4 When i start a new print and the hotend",
"start coming out of the hotend. This goes on for as long as",
"goes on for as long as the temperature is kept above melting point,",
"3D printer running on ramps 1.4 When i start a new print and",
"I am currently using simplify if that makes a... |
[
"is that if you don't apply it perfectly cleanly, it leaves very noticeable",
"I printed out of PLA to a small titanium rod. I've previously used",
"stains on the PLA. Can anyone recommend a good glue for this application",
"printed out of PLA to a small titanium rod. I've previously used Superglue",
"piece... |
[
"a sharp pull. This worked really well. I am trying to print with",
"to drop to around 190deg c then a sharp pull. This worked really",
"hot end to I get left with a length of PLA in the",
"matter what temperature I drop the hot end to I get left with",
"the feeder tube. OK I can heat the hot end and poke t... |
[
"I want the long side of it printed in the vertical direction or",
"filaments suggest \"reducing cross-sectional area\" of the print. Is this referring to the",
"area\" of the print. Is this referring to the vertical plane or horizontal",
"cross-sectional area\" of the print. Is this referring to the vertical... |
[
"I made. However, whenever I select it I am only able to select",
"am only able to select the faces or sides. Is there a way",
"made. However, whenever I select it I am only able to select the",
"mirror a triangular prism I made. However, whenever I select it I am",
"to select the faces or sides. Is there a... |
[
"in G-code, what is the difference between `Z`- axis and `E`- axis? I",
"When using `G1` command in G-code, what is the difference between `Z`- axis",
"using `G1` command in G-code, what is the difference between `Z`- axis and",
"Z0.350 F7800.000 G1 E-2.00000 F2400.00000 G92 E0 G1 X96.753 Y95.367 F7800.000 G1... |
[
"is proportional to the amount that it cools. If the answer is yes,",
"the filament contracts is proportional to the amount that it cools. If the",
"lower printing temperature might reduce warping-as the temperature interval over which the filament",
"smaller? Or perhaps the difference is negligible? Also, I ... |
[
"decided to print one STL file but the result is not the best",
"Host as the brand recomends, and set all the configuration as the recommended",
"the best one. That's what I was trying to print: [](https://i.stack.imgur.com/f1V22.jpg) and that's",
"printer. I'm us... |
[
"printer, but blowing on the print area) could improve the quality of PLA",
"directs air to the hotend, but is it beneficial to add an extra",
"(an) extra fan(s) (not connected to the printer, but blowing on the print",
"with a fan shroud that directs air to the hotend, but is it",
"blowing on the print are... |
[
"putting out any plastic. I replaced the nozzle with a 0.2 mm one",
"But nothing helped it keeps making this waves. At the old 0.4 mm",
"any plastic. I replaced the nozzle with a 0.2 mm one and now",
"The problem was that the nozzle with a 0.4 mm diameter wasn't putting",
"and speed. But nothing helped it k... |
[
"still warped I read up on how to fix, but most covered how",
"anything, and I am using it with the stock program (makerbot print). Otherwise,",
"so I shrunk to just a small area, but It still warped I",
"it with the stock program (makerbot print). Otherwise, I am using it as",
"models that covered the whol... |
[
"when plugged in it went to 18 °C. Is it the motherboard? How",
"have plans to install on) Upon further investigation, I tested the mother board",
"it was at 18 °C. I did try moving the pins, and that",
"to 50 °C, but it was at 18 °C. I did try moving",
"is not loose (very simple thing to try). I want to kn... |
[
"values for Ultimaker Kp 22.2, Ki 1.08, Kd 144. I have tried to",
"every time I run it and using the results gave worse results (sometimes",
"temps. Second is trying to do a PID tune. Third and fourth are",
"Using marlin 1.1x and Its possible I have something configured incorrectly. I can",
"using the resul... |
[
"glue stick. What can I do to keep the plastic sticking to the",
"I am having the PLA lift around the edges which I have NEVER",
"the bed during print. I will note that the lift is not super",
"than the glue stick. What can I do to keep the plastic sticking",
"NEVER experienced. The glue is not helping like... |
[
"I have a few strands. Would it be possible to mend the ends",
"melted together and after cutting I have a few strands. Would it be",
"filament had a tangle and got pulled into the printer head. Some got",
"my spool of filament had a tangle and got pulled into the printer",
"few strands. Would it be possibl... |
[
"(basically an open cube with 4 bottom layers). The wall width I measured",
"flow compensation parameters. I am using a 0.4 mm nozzle and therefore set",
"of fine-tuning my cheap CTC i3 clone. I'm using Cura 3.1 for slicing.",
"I got from this was 0.45 mm, which is much better than before.",
"The wall width... |
[
"home position and the PINDA probe is too far out over the heatbed",
"losing any printing area and hopefully prevents me having to edit any code.",
"be to move extruder 17mm closer to be the same as the original",
"be the same as the original printer but my deadline is fast approaching",
"a new extruder to ... |
[
"this is the end script: ``` G92 E0 G1 E-1.5000 F1800 ; layer",
"Build Summary ; Build time: 3 hours 9 minutes ; Filament length: 12689.1",
"to the border of the shape. I supposed that some scripts has changed",
"printed part and I noticed due the part is 14x8 and the nozzle",
"``` Z axis moves down 4mm aft... |
[
"Is there an integrated kickback protection in stepper motor drivers or should I",
"the steppers might fry the driver or the arduino when i turn off",
"the power supply. I haven't had an issue yet but it still bothers",
"I am afraid the steppers might fry the driver or the arduino when",
"when i turn off th... |
[
"first 3D printer today, QIDI X-ONE[2], and so far so good with the",
"my 1st print. I wanted to power off the printer, but I don't",
"today, QIDI X-ONE[2], and so far so good with the setup and getting",
"X-ONE[2], and so far so good with the setup and getting my 1st",
"don't see any instructions on how to... |
[
"I want to verify that it is possible to use a battery to",
"the power consumption of your heatbed (size) and hotend (model)? I want to",
"What is the power consumption of your heatbed (size) and hotend (model)? I",
"want to verify that it is possible to use a battery to power",
"and hotend (model)? I want ... |
[
"The resistance of the heat block will be used. The current to this",
"a circuit. The voltage will be set with pwm. Is this possible with",
"small heat block to increase/decrease the heat as fast as possible. The resistance",
"used. The current to this block is 500mA and is set constant with",
"a very small... |
[
"way to convert a 3D print file, like STL, to STEP - a",
"file, like STL, to STEP - a useable file format for plastic injection",
"STP or STEP file. If there’s no easy way to convert it, which",
"convert it, which I don’t think there is, does anyone know someone good",
"to convert the files through a couple... |
[
"supply, I am getting the thermal protection message when heating my bed with",
"at 100/101). link to a video showing panel: <https://photos.app.goo.gl/jiW9NE7wEB4H0mOy1> [](https://i.stack.imgur.com/iymMN.jpg)",
"to have stopped moving, and was cut through by the drive gear. This",... |
[
"be located outside of the US. Can anyone direct me to a seller",
"After doing a lot of research, I've decided I want to purchase a",
"than Amazon, which seems to have a bit of a mark-up on price,",
"finding several websites that seem to be located outside of the US. Can",
"a reputable, local seller. Other ... |
[
"for the Z axis, I have an M8 lead screw with 8 mm",
"instead of M5. What do you think about it? What should I keep",
"available online I could just use them instead of M5. What do you",
"I find it very difficult to find M5 rods for the Z axis,",
"M5 rods for the Z axis, I have an M8 lead screw with",
"I ... |
[
"Anycubic i3 mega Slicer: Cura 3.2.1 Printer chosen in Cura: Prusa i3, *Gcode",
"getting seemingly random lines scattered across the top surface of my prints: ",
"Cura 3.2.1 Printer chosen in Cura: Prusa i3, *Gcode flavor* changed to *RepRap*",
"![lines1](https://... |
[
"called [TinkerCAD](http://www.tinkercad.com), which lets you export your design in either STL or OBJ",
"STL or OBJ form. What is the difference between these two file types?",
"I use is called [TinkerCAD](http://www.tinkercad.com), which lets you export your design in either",
"form. What is the difference b... |
[
"A paper which answers this unambiguously would be the ideal answer to this",
"as for joints. What about other applications where load bearing properties are not",
"(extrusion based 3D printer) materials, such as ABS or PLA (or slightly more",
"as kevlar, fibreglass, or carbon fiber), safe for implantation in... |
[
"a clearance in the axial for moving up and down. When I put",
"is not the problem what is the problem in my situation?** I have",
"change? and if this is not the problem what is the problem in",
"for rapid movement and rapid changes in directions. I think the noise is",
"axial of the fan because I think th... |
[
"the temp jumped to 260 °C. I shut down the printer at that",
"heating up erratically. I first noticed this while printing a part in PETG",
"PETG and the temp jumped to 260 °C. I shut down the printer",
"up erratically. I first noticed this while printing a part in PETG and",
"was heating up erratically. I ... |
[
"dolly](https://toms3d.org/2017/02/23/building-cheapest-possible-prusa-i3-mk2/). I am confused whether to use RAMPS 1.4 or 1.5 or 1.6.",
"about to build a [Prusa i3 dolly](https://toms3d.org/2017/02/23/building-cheapest-possible-prusa-i3-mk2/). I am confused whether to use",
"be advisable to upgrade a RAMPS 1.4... |
[
"height? I found that some printers can do .05 layer heights, but the",
"printers can do .05 layer heights, but the Anet A6 can't? I am",
"do .05 layer heights, but the Anet A6 can't? I am interested to",
"A6 can't? I am interested to know if it is the stepper motors",
"the title, Why can't the Anet A6 do .... |
[
"colour material but when I pressed \"load filament\", it didn't make anything. Often",
"push it into the extruder and the remains of the old filament do",
"that the printer works. I don't have any pictures but the filament is",
"filament\", it didn't make anything. Often after five times doing that the print... |
[
"screw isn't tapped. Does anyone know the thread size, w.r.t. both pitch and",
"left nut for the lead screw isn't tapped. Does anyone know the thread",
"and unfortunately the left nut for the lead screw isn't tapped. Does anyone",
"lead screw isn't tapped. Does anyone know the thread size, w.r.t. both pitch",... |
[
"XY Accelleration: 1000 mm/s2 XY Jerk: 20 mm/s Retraction Accelleration: 2000 mm/s2 Extruder",
"have tried decreasing speed to 40 mm/s but the issue remains. **Printer**: Geetech",
"Geetech Prusa I3 Pro B XY Accelleration: 1000 mm/s2 XY Jerk: 20 mm/s",
"[](https... |
[
"For the hotend, I've bought the Greetech MK8 extruder. However, the temperature sensor",
"on the list for both Marlin and Repetier and the temp sensor reads",
"tried to select one of the NTC options on the list for both",
"it broken or am I selecting the wrong thermistor type? [Documentation for MK8](http://... |
[
"5 V or 6-36 V? What should be the best detecting distance? Should",
"V? What should be the best detecting distance? Should it be 2/4/8 mm.",
"go for M8 or M12 and 5 V or 6-36 V? What should",
"I am confused as to which proximity sensor to use. Should I go",
"which proximity sensor to use. Should I go for M... |
[
"increasing the amount of flow a bit, but didn't help (I might need",
"based on the project. But for some reason it is not the case.",
"first layer even though I choose different layer heights based on the project.",
"first layer is supposed to be set at .25mm no matter what the",
"matter what the layer hei... |
[
"passing that the servo motors for X and Y drive generate a different",
"write g-code to produce not only a tone but even a 2-tone chord.",
"written music to be performed on a 3D printer. Most of us have",
"of us have noticed in passing that the servo motors for X and",
"Harking back to the days of \"singin... |
[
"with a 3D printer too? What hardware and material should I use to",
"should I use to do this? Thanks in advance. Sorry for bad english,",
"the counter part's hole to rotate properly? If it's is like 0.05mm, can",
"to work as an axis. And what should be the gap size between",
"of the counter part: [![enter ... |
[
"built and done some simple tests on a TEVO Tarantula but I've noticed",
"I've disassemble the hot end, changed filament and I can't see any signs",
"I run the calibration with the Titan extruder, *only* the 400 steps is",
"it is pushed all the way down to the hotend, as per the",
"the hotend and calibrate ... |
[
"commonly printed plastic which I can buy that might be transparent to UV",
"to UV light? I wish to print a mould, then pour in my",
"wish to print a mould, then pour in my plastic which requires a",
"Is there any commonly printed plastic which I can buy that might be",
"can buy that might be transparent to... |
[
"extruder starts clicking, I tried adjusting the voltage with no luck, it's still",
"it's still clicking. And it doesn't extrude a lot of plastic sometimes it",
"doesn't extrude a lot of plastic sometimes it even stops extruding but the",
"with no luck, it's still clicking. And it doesn't extrude a lot of",
... |
[
"settings in slicer, and earlier I was printing non-vase mode and the prints",
"vase mode settings in slicer, and earlier I was printing non-vase mode and",
"I was printing non-vase mode and the prints came out fine. Layer height",
"I noticed my printer underextruding badly. The settings have not been changed... |
[
"1.4 * 0.9 angle stepper motors * DRV8825 drivers configured at 0.8V Vref",
"* Robotdyn RAMPS 1.4 * 0.9 angle stepper motors * DRV8825 drivers configured",
"above, two of them show the weird movement and the other shows me",
"my problem in the videos above, two of them show the weird movement",
"clicking on... |
[
"design software which support designing multi-material parts. I will be printing on a",
"for 3D design software which support designing multi-material parts. I will be printing",
"a geometry file which slic3r (or some other slicing software) will properly process?",
"or any alternative. My question is, what ... |
[
"printer head and putting it back together. I have printed with the printer",
"I have a Cura profile I can upload if that will help. Any",
"work. I have tried adjusting feedrate, flow rate, retraction amount and speed, temperature,",
"a lot of PLA filament and failed prints) to no avail. I will",
"clear and... |
[
"this dilemma. I am using a Prusa I3 printer with PLA, trying to",
"of this irksome issues. I can of course provide more in depth details,",
"have adjusted the flow rate, the speed, the layer height, temperature, and nothing",
"including a pic of what i am getting. Any Ideas?[![enter image description here](h... |
[
"i3 mk2s, using PLA, 210 °C (clean from what I can tell) nozzle,",
"4 for details). Where these support layers touch the outer brim, they adhere",
"touch the outer brim. They go down with a little bit of \"squeeze",
"on a genuine Prosi i3 mk2s, using PLA, 210 °C (clean from what",
"big starting foot print. ... |
[
"not square to each other. I'm wondering how to adjust this - I'm",
"and when it was done there was a gap on one side when",
"well (or so I thought) and printing a number of models pretty well.",
"distance between the front and back is the same (I can't imagine why",
"side when the lid was slid on. I checke... |
[
"protopasta The conductive pla is not that strong, so when I take my",
"do to themselves (unlike PLA) What’s a good way to remove a conductive",
"the board * using no skirt does not work, as the printer clogs",
"and after dumping a bunch of acetone on the board * using no",
"bot metal with a heated bed, the... |
[
"z-point of 4 mm or below. Is there a software that will enable",
"a need to only offer support for overhangs up to a certain z",
"will enable this, either as a setting/addition to Ultimaker Cura or just a",
"hanging over the build plate. I have a need to only offer support",
"only offer support for overhan... |
[
"3d printer you **could** use/do the following: * Create G-code using a program",
"arduino uno shield. * The drivers will control the steppers. If you want",
"the instructions to the drivers through a GRBL arduino uno shield. * The",
"(GRBL). * Pass it into an Arduino with GRBL. * The arduino can",
"work pr... |
[
"Creaform3D EXAscan laying around at the company I work for, and tried to",
"but its license is expired. I looked in the manufacturer site for drivers",
"if it still works. I discovered that it uses a software called RapidForm",
"Is there any other software or way to read the data coming from",
"for data ac... |
[
"is. Could I have some help finding the thread type and what hardened",
"I have some help finding the thread type and what hardened nozzles would",
"in the dark filament, but I know that eats up brass nozzles fast.",
"nozzles fast. But there is so many thread differences so I don't know",
"get some hardened... |
[
"with removing finished prints, but not all printers have them! * Is this",
"nice to have or must have feature? * Are there any downsides to",
"them! * Is this a nice to have or must have feature? *",
"to have or must have feature? * Are there any downsides to heated",
"heated beds can help with removing fi... |
[
"board to the computer. Can I plug external power supply and USB connection",
"not using any hotbed or anything else other than the two stepper motors",
"the RAMPS board. When powered on, can I plug the USB to my",
"the USB to my computer? Suppose I have connected two motors on the",
"When powered on, can I... |
[
"the heated to reach the target temperature as fast as possible, so I",
"Do I need to put a fuse or some other kind of safety?",
"1200Watt bed, so I really want to make sure that it is safe",
"want the heated to reach the target temperature as fast as possible, so",
"I'm building a 40x40x40cm corexy and I a... |
[
"With hot plastic being laid down layer after layer, I am worried about",
"only print in a well ventilated work space? Should I add additional ventilation?",
"layer, I am worried about fumes. Should I only print in a well",
"am worried about fumes. Should I only print in a well ventilated work",
"fumes. Sho... |
[
"print itself takes on my TEVO Tarantula with Marlin firmware. The time difference",
"with Marlin firmware. The time difference is about 15 %, at requested 50",
"Marlin firmware. The time difference is about 15 %, at requested 50 mm/s",
"always is giving me less printing time than the print itself takes on",
... |
[
"X1 power brick with a standard RAMPS 1.4 board - rather than the",
"brick with commercial printers lacking heatbeds. Is this possible with a RepRap printer",
"brick. I was wondering if it we're possible to use the same TronXY",
"this possible with a RepRap printer using a RAMPS board? I'm referring specifica... |
[
"how (h/w connections and firmware modification) can I do it for the extruder?",
"is in home position before it starts to drive for the very first",
"question as some of you mentioned that the question is not clear. I",
"X, Y, and Z axes. I was wondering how (h/w connections and firmware",
"mentioned that t... |
[
"a new printer if anyone knows a control board that has this sort",
"to write some software to take a picture check the print hasn't moved",
"back to the computer before continuing printing? I am happy to build/buy a",
"know if any of the available software/firmware allows custom scripts or calling back",
"... |
[
"vertical lines described as \"banding\"? Would the most likely culprit be the extruder?",
"the most likely culprit be the extruder? FWIW, this was printed in \"vase",
"Are these vertical lines described as \"banding\"? Would the most likely culprit be",
"\"banding\"? Would the most likely culprit be the extr... |
[
"again can't extrude after it's created. How can I connect the pieces after",
"Printer. I am very new to Autodesk Fusion360 so I am running into",
"am having trouble sketching a rectangle and then a text character and extruding",
"characters with my 3D Printer. I am very new to Autodesk Fusion360 so",
"next... |
[
"it on E1 instead. If you have any better idea how to fix",
"potentiometer on E0 so the motor isn't working properly anymore. I want to",
"E1 instead. If you have any better idea how to fix this instead",
"problem as [this person](https://www.thingiverse.com/groups/tevo-tarantula-owners/forums/general/topic:2... |
[
"area: 12x12 cm). I would like to switch to a glass bed and",
"smaller heated bed for ABS and a bigger one for PLA. Would the",
"cm glass plate). Would it be possible to use the old heating resistor",
"a bigger one for PLA. Would the glass crack due to non uniform",
"rework my printer to increase the printi... |
[
"find the zoffset M851 Z-0.59 M500 M211 S1 ``` And `G29` before printing.",
"offsets and its working good now. I was looking through Marlin G-code page",
"Does it add the Z offset to the offset of the `G29` mesh?",
"offset of the `G29` mesh? or the `G29` value replaces the `M851`? My",
"offset to 0 and let ... |
[
"it took longer to make). My one concern is the lithium ion battery.",
"heated bed of 40 degrees Celsius, and a heated extruder at 240 degrees",
"g-code line during the pause? Will this affect the remainder of the print",
"make). My one concern is the lithium ion battery. Right now I'm printing",
"a heated ... |
[
"about coding it? Are there programs that automatically calibrate all the motors? Can",
"aspects, gcode, stepper motor moment, axis zeroing, etc; but if I am to",
"printing aspect of the build as I realize that CNC's and laser engravers",
"the project. I currently own a 3D printer and am familiar with some",
... |
[
"cloud (billions of points) of the exterior of a building obtained by laser",
"density, and I cannot print it. Is there any algorithm which could use",
"a building obtained by laser scanning it with a Leica head. I successfully",
"to print the building by first creating a mesh. I tried using CloudCompare,",
... |
[
"was working on a model today and I need to make the black",
"to select the black surface. I tried using the flip normals feature, but",
"today and I need to make the black surface into a normal surface",
"normals feature, but I was still unable to select it. Any advice on",
"a solid is greatly appreciated.... |
[
"of product I could coat the pieces, non-toxicity is a requirement because it",
"my irrigation system, like tube connectors and such. I am aware that PLA",
"printing some pieces for my irrigation system, like tube connectors and such. I",
"aware that PLA is hydrophilic so I was wondering with what kind of",
... |
[
"Given a large set of data, I was able to create a 3D",
"this graph to create a physical model of this graph? [ was VERY bad and inconsistent, even",
"I tightened everything as before. I am quite sure it doesn't have to",
"[extrusion](https://i.stack.imgur.com/5cjuO.jpg) before the nozzle switch, it is really bad, even though I tightened",
... |
[
"use a 12 Volts, 16 amperes power supply, but I understand that you",
"extruder need 5 amp, and the heated bed build plate needs 11 amp.",
"of delivering 25 amp and 30 amp and they told me that if",
"and 30 amp and they told me that if I use those ones",
"20 amperes power supply (Model S-240-12) [![enter im... |
[
"working. What I did: 1. I check whether or not motor is moving",
"out cable and plugs - everything seems OK. 3. I checked whether motor",
"I'm sure one day someone will have same problem. I own a ZONESTAR",
"can I do, to see what is broken? Visually nothing looks like it",
"my trembling hands. After some g... |
[
"regardless of the program I'm using (Repetier-Host or Cura 15). Is there a",
"of the program I'm using (Repetier-Host or Cura 15). Is there a way",
"and I need to heat it up to unjam it. Unfortunately, the printer",
"a micro SD card to heat up the printer hotend but not print",
"does't want to connect to m... |
[
"then need to 3D print these molds. I would require to add a",
"structure through which I could make the cylinder). Is there any way to",
"print these molds. I would require to add a hole to pour in",
"this object (i.e. the structure through which I could make the cylinder). Is",
"to do so? My requirement i... |