Split (1)

train · 10.4M rows

ngram listlengths 0 10.5k
[ "just finished assembling my printer and I plug it into my computer with", "3d printing world. I just finished assembling my printer and I plug it", "plug it into my computer with the included usb cable and nothing happens.", "being plugged in but it just says \"unrecognized device in com 4\". Nothing", "an...
[ "3D printing, what raw material should I choose – PLA, ABS, HIPS etc.", "injection mold (for resin based raw material) using 3D printing, what raw material", "resin based raw material) using 3D printing, what raw material should I choose", "raw material) using 3D printing, what raw material should I choose – ...
[ "My main application for my 3D printer (Zortrax M200 Plus) is making 28", "happy with those. So I am looking for other software to edit .STL", "to remove. I had a bit more luck creating support structures with Meshmixer,", ".STL files to add supports automatically, preferably with an option to edit those", ...
[ "I am getting a thermal runout. The pla is hard, I don't want", "180, but I am getting a thermal runout. The pla is hard, I", "runout. The pla is hard, I don't want to broke the throat. [![enter", "pla is hard, I don't want to broke the throat. [![enter image description", "extruded and formed on the nozzle...
[ "effective way to shred the plastic into smaller bits for the extrude to", "to re-use my failed prints by re-extruding the plastic to be used in", "shred the plastic into smaller bits for the extrude to use. What is", "would love to re-use my failed prints by re-extruding the plastic to be", "way is finding...
[ "but that all doesn't help me. Almost everyone is saying that I just", "44 #endif #else #define E0_STEP_PIN 26 #define E0_DIR_PIN 28 #define E0_ENABLE_PIN 24 #ifndef", "of code snippet\")](https://i.stack.imgur.com/ufVqI.png \"Screenshot of code snippet\") Here is the actual code: ```", "Here is the actual co...
[ "but this one I have never seen or had before. Do you guys", "one I have never seen or had before. Do you guys have any", "last one is a hard one for me. It prints super fine up", "the print quality problems. But the last one is a hard one for", "it seems to happen roughly at the same spot. I tried PID tuni...
[ "the travel lines below! Why is it jumping all over the place? [![Cura", "\"sharpest corner\", the bumps would all just stack up in one place, but", "\"Avoid printed parts when traveling\" enabled and disabled, doesn't seem to make much", "up in one place, but still stick out. [![Cura shape](https://i.stack.i...
[ "Why isn't my printer doing anything with the M406 and M117 messages? Full", "line endings, but looking at the file in a hex editor, all the", "M117 Filament sensor OFF ``` The first line is provided by Prosi's default", "looking at the file in a hex editor, all the lines seem to", "default PLA profile. The...
[ "the issue seems to be that the driver is not recognized at all", "the microstepping was set at 1/256 instead. Maybe somebody could tell me if", "the Z axis, etc * Check the pins on `pins_RAMPS.h` and make sure", "I performed the reverse calculation to find out that the actual microstepping on", "assigned p...
[ "little part (inside the transparent cube below) will be printed? [![The part I", "do that in Cura? How can I tell Cura to generate a gcode", "what was well printed. I've made a simple 3D cube model in Blender", "aligns the cube origin and the model origin (which I don't want). What's", "origin (which I...
[ "a clue whats the issue? [![enter image description here](https://i.stack.imgur.com/oeept.png)](https://i.stack.imgur.com/oeept.png) [![enter image description here](https://i.stack.imgur.com/CEvrT.jpg)](https://i.stack.imgur.com/CEvrT.jpg)", "is also the starting point of the print) is always bigger than the", ...
[ "would you go about in getting the exact measurements of that white rod?", "chair. For that, I'm designing a 3d-printed part that's going to fit on", "measurements of that white rod? I tried a caliper, and I'm able to", "for my Sayl office chair. For that, I'm designing a 3d-printed part that's", "that I wa...
[ "(as if the bed is bent) but I have used the edge of", "printer where my nozzle isn't moving flat with my print bed (as if", "flat. I have properly leveled my bed with a piece of paper and", "checked the whole printer to make sure it's square but the problem continues.", "I have properly leveled my bed with...
[ "settings - Printer](https://i.stack.imgur.com/FXKEP.png \"Machine settings - Printer\")](https://i.stack.imgur.com/FXKEP.png \"Machine settings - Printer\") and [![Machine", "software like Ultimaker Cura, and this is where I need some help so", "with the printer and extruder specifications. The following is my...
[ "later removed easily. Can any one suggest a 3D printing material that can", "and later removed easily. Can any one suggest a 3D printing material that", "easily. Can any one suggest a 3D printing material that can be dissolved", "that I can embed in a resin and later dissolve. I know that", "and later diss...
[ "I converted into an STL and then into gcode using cura and I", "choose \"print file\" and then select a gcode to print it takes me", "not the softwares fault and low and behold I was running into the", "Maker Select 3D Printer v2, and tried to do a print. Now here", "print it takes me back to the main scre...
[ "same time. Now I can use one at a time but not both", "can use one at a time but not both at the same time.", "Now I can use one at a time but not both at the", "I am using 2 extruders. Is it possible to use them both at", "not both at the same time. Is there a gcode that supports this", "at the same tim...
[ "recently saw [this](https://www.youtube.com/watch?v=TpvNEZCvk84) video of super-swellable polymer and felt inspired. Printing a swellable", "a printable material. Does anyone know of a material that is? Preferably, swelling", "super-swellable polymer and felt inspired. Printing a swellable structure would be s...
[ "started to function somehow: As the sensor doesn't sense the surface (or the", "heat bed), as it didn't work at all I had to put it", "which isn't either flat nor stable according to temperature, I added aluminium tape", "especially when they were big (as they didn't stick well, they corners warped", "whic...
[ "renders of STL files to a document. I currently open the STL files", "STL files in Preview or one of the slicers and grab a screen", "one of the slicers and grab a screen shot. Is there an easier", "easier or automatic way to generate PNG images from STL files on a", "I currently open the STL files in Prev...
[ "countinue extruding. I am using 3D branche filament (it's a local store in", "it click before the print. When it does that. I stop the print", "printed a lot of stuff with those settings and they seem to work", "they resolve it? If anymore precision or clarification is needed, please ask. EDIT**", "ple...
[ "set temperature say 220 °C, printer heats up to it and it only", "hotend temperature drops](https://i.stack.imgur.com/w8SCE.png)](https://i.stack.imgur.com/w8SCE.png) What could be the reason? Electronics details: * Firmware used:", "varies +/- 0.5 °C under non operating condition. But if I start a", "a prin...
[ "seems to simply print a loop around, but not touching, my print. How", "around, but not touching, my print. How is this supposed to help my", "of the options under \"build plate adhesion\" is \"skirt\", which seems to simply", "adhesion\" is \"skirt\", which seems to simply print a loop around, but not", "...
[ "with smooth vertical edges. Specifically, this model, [ID Badge Holder](https://www.thingiverse.com/thing:2517008), on the edges", "the D&D figures I've printed, or some of the other thicker square pieces", "model, [Cat Necklace](https://www.thingiverse.com/thing:2253220). Here is the resulting issue: [![Detac...
[ "my explanation makes sense, but here's what it comes down to: Does HIPS", "during a print. The object I was printing was a hollow cylinder. The", "print. The object I was printing was a hollow cylinder. The walls were", "walls were about 5 mm thick, getting thinner near the top edge. At", "edge. At the mom...
[ "home position that it ground a permanent line on the bed. It's trying", "is near-perfect. But when I start a print job, the nozzle is much", "speed settings remained untouched. How can I solve this? The issue popped up", "Z axis is suddenly acting very odd. When I 'home' the Z axis", "good. It's not the Z-...
[ "started making a clicking/ticking noise. Our printer is a Flashforge Dreamer. What is", "a clicking/ticking noise. Our printer is a Flashforge Dreamer. What is wrong with", "into the right side and started making a clicking/ticking noise. Our printer is", "print anything. We unloaded the ABS that was in the ...
[ "know how this happened and what I can do to prevent it from", "of the glass plate, and the whole thing slipped an inch or so.", "2 days into a 5-day build, I came home from work and found", "the heated surface, remaining clipped to the top and bottom of the glass", "I can do to prevent it from happening ag...
[ "stepper. There's a blue light glowing inside BLTouch, which turns off if I", "pull up settings of end stop? I cuurently have: * Marlin 1.1.6 *", "videos about older firmware version. I followed [this document](https://docs.wixstatic.com/ugd/f5a1c8_77c6538efc934dbeab2f6e06e175ec35.pdf). To avoid causing any", ...
[ "on a hot day. The part won't be exposed directly to the sun,", "when in the sun, and potentially from the engine radiating heat through the", "in the process of building my own head unit / stereo prototype for", "°F), and my car might get up to 60 °C/150 °F on a", "my part? If not, what material, if any,...
[ "test is a 20 mm hollow cube from Thingiverse that I have used", "filament too. I am not sure that this is a clogging problem since", "cube from Thingiverse that I have used for the previous filament too. I", "a 20 mm hollow cube from Thingiverse that I have used for the", "filament came out of the extruder...
[ "the plate, and the result is very disgusting. It is the same with", "Cura and I've reset it several times, using the defaults options or not.", "prints (normal cube): [example 1](https://cdn.discordapp.com/attachments/380420138920574986/455045425636835338/Snapchat-1209640225.jpg) [![First example of poorly pri...
[ "filament in the extruder for a prolonged period of time while the printer", "Can I leave the filament in the extruder for a prolonged period of", "the filament. Can I leave the filament in the extruder for a prolonged", "quick question about the filament. Can I leave the filament in the extruder", "Just on...
[ "system and they work just fine. Could it be the board or what", "not move. I tested the motor and cable on another system and they", "on my Creality Ender-4 printer. I have heated the nozzle but the extruder", "and they work just fine. Could it be the board or what could", "I have heated the nozzle but the...
[ "a voltage test across the output terminal at D8 where the heated bed", "have a fan attached to D9. This leaves this terminal open and with", "I then noticed that the LED that usually lights up for D8 was", "I'm pretty confident the bed itself is not the problem as I've ran", "MOSFET. Despite this I have fo...
[ "both and if the glass alone had a significant effect on the sounds", "Im planning on building an enclosure for my CR-10S and am debating whether", "heat in or going with double pane glass walls. My main concern is", "heard a printer before and after with both and if the glass alone", "for my CR-10S and am ...
[ "from the infill. Knowing this, and knowing the dimensions of the box, the", "the box, the weight of my body, the surface area of my shoes,", "of my shoes, and the material I'm working with, is there any good", "print settings? I know that structural strength comes from the infill. Knowing this,", "settings...
[ "fairly rigid sheet metal frame. In addition, I added steel rods has Z-braces.", "to the desk (preventing the machine from moving) Surprisingly, these two opposites provided", "freely) 2. bolt the machine to the desk (preventing the machine from moving)", "for ghosting. My question is: *which approach is bett...
[ "(easily and/or without voiding the warranty and taking it completely apart). I imagine", "how do you reinsulate the MakerBot Smart Extruders? Backstory: I work at the", "the MakerBot Smart Extruders? Backstory: I work at the library. We've recently replaced", "and taking it completely apart). I imagine even ...
[ "lower my maximum retraction speed. What I tried since the rebuild: 1. Replace", "with other values, but also about 2.5 times too high; 2. Connecting another", "in the firmware, which does have this effect? I am using Marlin 1.8.5", "-> G1 F100 E30 ``` and I got ``` 5220 steps for 30mm", "even with another ...
[ "of all connections and 3 different (electronic ribbon) cables and still can’t fix", "possible thoughts on why this happens? The extruded motor will move in the", "the seating of all connections and 3 different (electronic ribbon) cables and still", "Zortrax M200 has a skipping extruder motor, I’ve checked th...
[ "have a question about Slic3r software. I would like to subtract two parts.", "to subtract two parts. For example, I have an STL model, when I", "right click on the part, I can select Settings..., and in the Settings", "proper thickness. Now we have two parts where one of them is inside", "example, ...
[ "\"CURA settings - Printer\")](https://i.stack.imgur.com/CaqvA.png \"CURA settings - Printer\") Extruder [![CURA settings - Extruder](https://i.stack.imgur.com/SfRst.png", "for adhesion\") These are my CURA settings: Printer [![CURA settings - Printer](https://i.stack.imgur.com/CaqvA.png \"CURA", "probl...
[ "In Cura, I tried to add a printer many times and this message", "driver that came with it, `CH341SER_MAC`, turned on the printer, connect USB cable,", "> In OSX, I discover in System Information, an USB2.0-Serial, that I think", "an USB2.0-Serial, that I think can be the printer. Is it a printer", ...
[ "has been connected to that stepper for five months now. Using an Ohm", "now. Using an Ohm meter to check I found that the [10amp 125v](https://www.mouser.com/ProductDetail/Littelfuse/0451010MRL?qs=sGAEpiMZZMtxU2g%2F1juGqdRmCQF0%252bT4VCAcmqQZMjh4%3D)", "to the power pins had blown on both drivers connected to ...
[ "on materials: * Ideal top 3 materials recommended/ most suitable for this item?", "to its fatigue resistance, semi-flexible, and lightweight characteristics.* Entire Material Lists looked at:", "and suggest on materials: * Ideal top 3 materials recommended/ most suitable for", "**Item to replicate via 3D...
[ "but that leads to the thin lines not adhering at all. My printer", "smartphone)* I already did Bed level correction, so each line is exactly the", "direction are severely squished. [![Print of the default V2Calibration.gcode file on my Prusa", "is exactly the same width over its entire distance and tried to ...
[ "the G-code in Slic3r without saving the exported G-Code first? When aligning seams", "`Slice now` and `Export G-Code` do different things. While `Slice now` is nice,", "Is there an actual way to generate and visualize the G-code in Slic3r", "now` is nice, it does not show any tool paths etc. Is there", "it...
[ "result ``` +0.406 +0.127 +0.411 -0.161 -0.007 -0.041 -0.572 -0.652 -0.668 ``` Finally", "up the screw of the bed, close to 0,0 position or loosen it?", "I loosen it, it gets away from zero and I expect the opposite", "is the result ``` +0.406 +0.127 +0.411 -0.161 -0.007 -0.041 -0.572 -0.652 -0.668", "My G2...
[ "giving advice that I know nothing about 3D printers. This is the printer:", "just received an old 3D printer from one of my school teachers. I", "attached to it, or any other info about it. How can I find", "know nothing about 3D printers. This is the printer: Backside [![Printer as seen", "is the printe...
[ "same happens when push the \"confirm\", after the mesh bed leveling. I'd like", "by the Anet A8 sample files built in with the firmware zip file.", "I have an Anet A8, and recently updated the firmware to Marlin 1.1.8.", "but, sometimes, right after finishing a printing (while doing the \"home all\"), the", ...
[ "the fuse I bought:* [![Picture of the fuse I bought](https://i.stack.imgur.com/QU6dU.jpg \"Picture of the", "showing the internals of the power supply unit:* [![PSU, cover removed showing fuse](https://i.stack.imgur.com/fYGTI.jpg", "and turned it on and everything seemed fine until I started printing. It", "...
[ "am printing from an SD card as I always have. I changed SD", "and it will over advance the Y axis. This behavior was preceded by", "I checked the G-code and all the commands including the E commands seem", "auto homing. Using the position commands I can advance the X and Y", "stepper motor stopped feeding ...
[ "solution? I don't want to damage (my only) 3D printer for this project.", "the question is: Can it handle at least four days of continuous load", "continuous load or should I search for an alternate solution? *I don't want", "it handle at least four days of continuous load or should I search", "of contin...
[ "alloy Heatblock (right)](https://i.stack.imgur.com/uxd43.jpg \"Prints using BQ Alu Heatblock (left) and Copper alloy heatblock", "I was not able to print my PETG (Colorfabb XT filament) below 270°C", "piece, first picture, first piece, second picture). I use Cura, so I activated", "PETG/XT? I did not discove...
[ "which must be related with retraction and is generated on Z layer change:", "\"Print layer effect\")](https://i.stack.imgur.com/vasJH.jpg \"Print layer effect\") The model itself, is printed in one", "related with retraction and is generated on Z layer change: [![Print layer effect](https://i.stack.imgur.com/v...
[ "\"Coasting\" was Enabled: * Coasting Volume 0.064 mm3 * Minimum Volume Before Coasting:", "(circled in red), and how can I fix it? It is making my", "is making my prints come out horrible. Not shown in the picture, but", "prints come out horrible. Not shown in the picture, but the option \"Coasting\"", "my...
[ "is Delta style Kossel clone and I have bad luck with Print In", "hinges. I suspect that my printer just can't achieve low enough tolerances to", "I suspect that my printer just can't achieve low enough tolerances to make", "hinges work. Are there any tricks I can employ to get better prints", "achieve low ...
[ "area a little larger than the part(s) being built would save in time", "for what area is heated? I'm sure it would be an increase in", "that being able to just heat an area a little larger than the", "configurable for what area is heated? I'm sure it would be an increase", "why beds aren't hardware/G-code ...
[ "point (which for me is more obvious) **Is there a way to instruct", "the new layer and then lifts the nozzle. That caused my few printouts", "lifts the nozzle. That caused my few printouts to fall as they collided", "a way to instruct Cura to lift nozzle before it goes to the", "it raises the nozzle in las...
[ "This collection of answers will be useful to evangelize making to a whole", "on Thingiverse or in Fusion (more like a quarter)! I'm not a parent", "box. --- 1: the (girls) are not interested in my normal kids' goto,", "NOT an opinion-gathering post, though there may be more than one \"correct\" answer.", "...
[ "know about some issues with the clamps, if I get myself an Ender-3,", "replace the hotend with a proper one from day one. So knowing its", "about some reviews. Some claim it is running 24 V, one did claim", "the clamps, if I get myself an Ender-3, I want to replace the", "clamps, if I get myself an Ender-3...
[ "reset extrusion distance ``` The [RepRap Wiki](https://reprap.org/wiki/Start_GCode_routines) suggests that there could be made", "love to swipe the nozzle before starting to print, making sure that the", "of feed stock G92 E0 ; reset extrusion distance ``` The [RepRap Wiki](https://reprap.org/wiki/Start_GCod...
[ "into the sensor input: What do I have to do (besides making a", "Ender 3. From the factory, it has an aluminium bed. So I also", "things something dawns on me: The normal input and output voltage of a", "as I read up on these things something dawns on me: The normal", "V based Ender 3. From the factory, it...
[ "the print itself is printed outside the heated bed, while there is some", "the slicer before generating the G-code.* * How can I center the print", "heated bed, while there is some space left at the opposite sites. It", "not in the center. * Why is the print not centered on the", "bed? *It was centered in ...
[ "filament flow Printed parts that fail: [![Top view printed part](https://i.stack.imgur.com/2wEjO.jpg \"Top view printed", "two parts on the left are printed in one job* [![Side view printed", "i3 Extruder: E3D 1.75 all metal hotend. Nozzle: .4 Print temp: 260°C (max.", "to troubleshoot 1. First I thought my ...
[ "can perform such an end-of-print action on my CR-10 with a cura plugin?", "description I read; does anyone know what this process is called? Is there", "perform such an end-of-print action on my CR-10 with a cura plugin? If", "about a guy who found a way to knock over completed prints with", "CR-10 with a ...
[ "voltage of slightly over 12V right from the beginning. Hence, I suspect the", "lead to the startup noise appearing again. Only when waiting for multiple minutes", "RAMPS 1.4 board. The hotend cooling fan is connected to the 12V-AUX pin", "is receiving a higher amount of current than it should. Moreover, the ...
[ "Now, the hotend center axis is 11 mm from the carrier plate with", "move out some distance (ca. 13 mm) to the current Z axis. This", "with the \"Mk 10\" cooler mounted right onto a pair of 5 mm", "22 mm, I will have to move out some distance (ca. 13 mm)", "mm in front of the front left corner. Now, the hot...
[ "the comment and works flawlessly. The machine processes this as `G0Y10Z-5` which seems", "this piece of G-code is valid: ``` G0 (Some comment (Its G0 command))", "G-code is valid: ``` G0 (Some comment (Its G0 command)) Y10 Z-5 ```", "if this piece of G-code is valid: ``` G0 (Some comment (Its G0", "such co...
[ "scratch in a software that is way more user friendly, deterministic, simpler, etc.", "an example, but god answers should not be limited to Thingiverse, nor my", "is way more user friendly, deterministic, simpler, etc. And then I do redesign", "remix it? I'm looking for some canonical guidelines to refer ...
[ "drop down and form don't work correctly if you select \"I don't want", "and form don't work correctly if you select \"I don't want to share", "noticed that my version of Ultimaker Cura was out of date, so I", "security extensions. Where are reputable mirrors for Cura? Download.Cnet.com and Sourceforge [came ...
[ "didn't function), + RepRapGuru\\_Marlin\\_v4, + RepRapGuru\\_Marlin\\_v2 Additional information: * My power supply is", "a little Hardware: * RepRap Guru DIY Prusa i3 V2 3D Printer Kit", "A4988 Driver * Firmware: + Marin 1.1.8, - 1.1.7 (screen didn't function), -", "rod riders to near atomic perfection. * Ch...
[ "while I was preparing the SD card with the settings being 210°C for", "started printing and kept heating the nozzle. I stopped it at 217°C. I", "it to \"preheat\" mode while I was preparing the SD card with the", "it at 217°C. I looked for an answer on the internet but all", "back on. I then immediately re...
[ "shrinkage, since I will be printing parts that will fit into each other.", "for outdoor purposes, but printable on unheated beds. I will mostly use it", "up to 50°C/120°F) and car accessories (70°C/160°F). If it requires annealing, it should", "sensor node enclosures (should withstand temperature up to 50°C/...
[ "FDM printing, or some process similar to it? I think it has all", "while. I couldn't find any examples or anyone talking about such a material", "a material for use, on here or the general Internet. I wonder if", "about such a material for use, on here or the general Internet. I", "and could produce a flex...
[ "control if it clicks at special angles or randomly, but it clicks randomly.", "and A4988's. During prints, my extruder motor randomly clicks. I touched the filament", "own a DIY Hypercube Evolution equipped with Tevo Titan extruder, Clone Chimera hotend", "Clone Chimera hotend and Capricorn's High-temp PTFE ...
[ "this. I am attempting to widen the part essentially 3mm. This would involve", "attempting to widen the part essentially 3mm. This would involve modifying the chain", "I can do the above in FreeCAD? I'm learning this so tutorial links", "widen the part essentially 3mm. This would involve modifying the chain s...
[ "by a fresh install of the latest Rep G. I rebuilt the profiles", "(set extruder temperature) ``` It does not contain a ``` M109 S110 (set", "haven't started to troubleshoot yet. I am looking for suggestions on how to", "few seconds after start of print, I noticed that the print bed temp", "prints normally,...
[ "between a successful first test and all the messes). I am storing the", "coupling#3](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible coupling#3\")](https://i.stack.imgur.com/djWvKm.jpg \"z axis flexible coupling#3\") YouTube videos, that I", "humidity. still basically stumped!* EDIT 2: (Additional i...
[ "trouble with Print in Place models and I'm trying to find out if", "to improve my print quality. The printer I am using is a Kossel", "I'm having trouble with Print in Place models and I'm trying to find", "if there's something I can do to improve my print quality. The printer", "calibration * tolerances *...
[ "filament, that is suitable for this purpose. The requirements are: 1. Stable at", "water kettle and am searching for a filament, that is suitable for this", "for a filament, that is suitable for this purpose. The requirements are: 1.", "this purpose. The requirements are: 1. Stable at 100°C (212°F) 2. Resist...
[ "as I'm trying to print another part, I've run into a situation where", "description here](https://i.stack.imgur.com/j56yL.png)](https://i.stack.imgur.com/j56yL.png) All I did was use the \"mirror\" feature to put it", "a better orientation for printing.... Any ideas what's going on here? I'm using", "for pri...
[ "// For M851 give a range for adjusting the Z probe offset #define", "will be ignored if ENDSTOPPULLUPS is defined //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX", "// set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING", "of the endstop. #de...
[ "PEEK ([PolyEther Ether Ketone](https://en.wikipedia.org/wiki/Polyether_ether_ketone)), a thermoplastic polymer in the polyaryletherketone (PAEK) family. PEEK", "(PAEK) family. PEEK competes with certain Aluminium alloys but is half the weight", "family. PEEK competes with certain Aluminium alloys but is half t...
[ "% or less. Probably someone has seen or reviewed another software to achieve", "% or greater. * The walls and forms: this has the same of", "at 15 % or less. Probably someone has seen or reviewed another software", "25 % but the same base has some tabs for screws and mount", "same part? For example: * Base...
[ "design or a standard third party board? * Does anyone have any photos", "* Ender 3 and; * CR-10 I would like to know how this", "Is the board a proprietary design or a standard third party board? ", "board a proprietary design or a standard third party board? Does anyone", "Ender 3 and; * CR-10 I would ...
[ "to outgas after printing and being cured. My question relates to this: ", "[this answer](https://3dprinting.stackexchange.com/a/183/11242), 3d printed materials continue to outgas after printing and being cured.", "being cured. My question relates to this: How much does heating the", "affect out-gassing? ...
[ "printers (markforged, desktop metal and a few other industrial ones). Is there any", "aluminium), but after a short research on google I found only too expensive", "research on google I found only too expensive printers (markforged, desktop metal and", "too expensive printers (markforged, desktop metal and a...
[ "(as opposed to the >€2000 semi-professional lab budget prototyping class), or were the", "I realise that early popularity would grow exponentially, but I'm thinking particularly at", "of these kit machines also suitable/adopted by hobbyists? I realise that early popularity", "in the <€300 price range, as pri...
[ "clean. This happens consistently every time I print any object. The perfectly printed", "I place a raft or a brim below/around the print - the raft", "every time I print any object. The perfectly printed raft can be seen", "out totally fine with the exception of the first layer. Here's the weird", "2 and m...
[ "πr², we get the area of the filament in square millimeters (rounding to", "m = 112 m which is close enough to 110 m. BUT as", "to 110 m. BUT as all makers of filament and makers of extruders", "that the 3.00 mm diameter is not what is really so; it's actually", "decimal points) For 1.75 it's 2.41 mm² For 3...
[ "points, but has anyone compiled a list of empty weights from various manufacturers", "weighs. Not having emptied any spool yet, I can't contribute data points, but", "I knew in advance how much the *empty* filament spool weighs. Not having", "can't contribute data points, but has anyone compiled a list o...
[ "Elsewhere, I see warnings not to oil your filament to make it go", "So, if I use the 608's, will oil leak on the filament, and", "make it go through the extruder better, because problems going through mean something", "warnings not to oil your filament to make it go through the extruder", "not to oil your ...
[ "to use with my still-in-transit Ender 3. Since the bed came in before", "does change shape, should it be put with the dish side up or", "with the dish side up or down? Logic would say that if it", "while the top is slightly cooler, so in theory the bottom may expand", "likely that the glass may change shap...
[ "say the outer edge along the top of the box is 50 mm", "tightly you want to fit, though I expect in cases where a tight", "Let's say I'm modeling a simple box with a lid. Just as an", "a lid for this box to surround the top with an inner edge", "inner edge size of also exactly 50 mm x 50 mm ......
[ "have heard people talking about masterspool, when talking about 3D printing filament. ", "filament. What exactly is master spool? * Where did the idea come", "about masterspool, when talking about 3D printing filament. * What exactly is master", "distributors/manufacturers have adopted this already, a...
[ "What's a good rule of thumb for how thick to make the outside?", "for how thick to make the outside? I'm looking for something along the", "to make the outside? I'm looking for something along the lines of millimeters", "something along the lines of millimeters thick per square inch of area. I'm", "other o...
[ "know about the paper trick for leveling the print bed, but my understanding", "thus far, the 0.1 mm seems typical for other printers, too. I want", "slicing software, but most prints on this machine will be .1mm. In my", "but most prints on this machine will be .1mm. In my (admittedly limited)", "mm typica...