Daily Papers

LLM agents combine models with execution harnesses, so agentic benchmark performance reflects their joint behavior. We argue that harnesses should therefore be evaluated through their interactions with underlying models. We develop a framework combining five complementary measures: (i) Valid Completion Rate (VCR), how reliably agents finish normally and deliver evaluable results, irrespective of task correctness; (ii) Model-Harness Fit, how well a harness supports task achievement through valid completion for a given model; (iii) Cross-Model Fit, a harness's overall suitability across evaluated models; (iv) Interaction Residuals, pairing-specific execution strengths and weaknesses hidden by component-level summaries; and (v) Token Load, the token demands of agent execution, including failed attempts. We evaluate four general-purpose harnesses (OpenCode, Codex CLI, Pi CLI, and DeepAgents) with four core models, plus two fixed native model-harness systems, on six benchmarks covering context management, tool use, long-context planning, multimodal interaction, and artifact handoff. Including native references and stress conditions, 111 evaluation settings yield 52,168 trajectories. Harness rankings vary across models and benchmarks; task performance and valid completion can favor different pairings, and similar task scores can accompany distinct execution profiles. OpenCode ranks first in cross-model performance, while DeepSeek V4 Flash Preview maintains consistently high Mean VCR across harnesses on the shared four-benchmark panel. These findings support evaluating model-harness interactions, training transferable harness-use capabilities in models, and harness designs adapted to the model and task.

Urban traffic flow is governed by the complex, nonlinear interaction between land use configuration and spatiotemporally heterogeneous mobility demand. Conventional global regression and time-series models cannot simultaneously capture these multi-scale dynamics across multiple travel modes. This study proposes a GeoAI Hybrid analytical framework that sequentially integrates Multiscale Geographically Weighted Regression (MGWR), Random Forest (RF), and Spatio-Temporal Graph Convolutional Networks (ST-GCN) to model the spatiotemporal heterogeneity of traffic flow patterns and their interaction with land use across three mobility modes: motor vehicle, public transit, and active transport. Applying the framework to an empirically calibrated dataset of 350 traffic analysis zones across six cities spanning two contrasting urban morphologies, four key findings emerge: (i) the GeoAI Hybrid achieves a root mean squared error (RMSE) of 0.119 and an R^2 of 0.891, outperforming all benchmarks by 23-62%; (ii) SHAP analysis identifies land use mix as the strongest predictor for motor vehicle flows and transit stop density as the strongest predictor for public transit; (iii) DBSCAN clustering identifies five functionally distinct urban traffic typologies with a silhouette score of 0.71, and GeoAI Hybrid residuals exhibit Moran's I=0.218 (p<0.001), a 72% reduction relative to OLS baselines; and (iv) cross-city transfer experiments reveal moderate within-cluster transferability (R^2>=0.78) and limited cross-cluster generalisability, underscoring the primacy of urban morphological context. The framework offers planners and transportation engineers an interpretable, scalable toolkit for evidence-based multimodal mobility management and land use policy design.

Sparse autoencoders (SAEs) represent model activations with sparse, linearly decoded features, but the downstream effects of those features need not compose additively. We introduce SAE Additivity Residuals (SAR), which measure the behavioral variation left unexplained above a chosen interaction order. Under independent feature subset sampling, population SAR is exactly the normalized energy of interactions above that order and bounds coalition ordering error for the optimal low order approximation. To distinguish compositionality associated with the SAE representation from that induced by downstream computation, we compare learned SAE coordinates with sum preserving random rotations of the same selected subspace and find lower first order residuals for the learned coordinates across all 18 model and behavior settings. The coordinates are nevertheless not fully additive: pairwise terms improve held out coalition ordering in every setting and outperform parameter matched models using randomly selected third order terms. In a combined steering experiment, pairwise modeling raises rank fidelity from 0.5874 to 0.7790 and reduces ordering error from 0.1444 to 0.0606. Together, these results show that SAE coordinates support comparatively compositional behavioral descriptions while faithful joint explanations and interventions still require interactions beyond individual feature effects. Code is available at https://github.com/OpenSAE/SAE-Behavioral-Compositionality.

Egocentric 4D interaction forecasting aims to anticipate both where future interactions will occur in 3D and how the human body will move to realize them, providing an important capability for assistive robotics and human-computer interaction. Existing methods struggle to translate semantic understanding into precise continuous 3D localization and to balance motion diversity with structural consistency in pose forecasting. More fundamentally, these tasks are often modeled separately, leaving the continuous geometric and temporal correspondence between interaction locations and body motion insufficiently captured. To address these challenges, we introduce Coherent4D, a large-scale egocentric dataset for continuous 4D interaction forecasting, comprising approximately 233K samples across three domains. Each sample pairs a sequence of future 3D interaction locations with corresponding full-body poses, aligned in time and expressed in a shared coordinate system. We also provide evaluation metrics in continuous space. Building on this formulation, we propose HIGFlow, a Hand Interaction Guided Residual Flow framework that models forecasting as a cascaded where-to-how process. HIGFlow first forecasts continuous future interaction locations by combining semantic grounding with short-horizon visual dynamics, and then uses the predicted location sequence to condition a deterministic motion anchor and residual Flow Matching for diverse yet structurally consistent full-body motion forecasting. Extensive experiments across all three domains demonstrate consistent improvements over representative baselines on both location and pose forecasting, while ablations validate the contributions of the proposed components. The project page is available at https://corrineqiu.github.io/from-where-to-how/.

I investigate the spontaneous-fission (SF) half-lives of ^{254,256}Rf within the multidimensionally constrained relativistic Hartree-Bogoliubov (MDC-RHB) model combined with the local quasiparticle random-phase approximation (LQRPA) method. The collective inertia is evaluated using the finite-amplitude method (FAM), which enables a fully self-consistent treatment of dynamical residual effects beyond the conventional cranking approximation. The effective collective potential is constructed by subtracting both the vibrational zero-point energy and rotational energy correction from the deformation energy surface. The SF half-lives are evaluated within the Wentzel-Kramers-Brillouin (WKB) approximation. Compared with the nonperturbative and perturbative cranking approximation, the FAM-LQRPA collective inertia is significantly enhanced, especially around the ground-state minimum, due to the dynamical residual interaction included in the QRPA. As a consequence, the predicted SF half-lives increase by several orders of magnitude and become consistent with experimental data. The calculated SF half-lives are 5.65 μs for ^{254}Rf and 0.95 ms for ^{256}Rf, both within approximately two orders of magnitude of the corresponding experimental values. These results indicate that a self-consistent treatment of dynamical residual effects and beyond mean-field correlations is crucial for quantitative microscopic descriptions of SF within covariant density functional theory.

Conditional generative models are increasingly used for scientific prediction beyond the direct training support. Yet scientific questions often concern whether one intervention changes the effect of another. Such interactions can be of primary interest while explaining little of the total variation, allowing models to appear accurate overall without recovering the relevant scientific effect. It remains unclear how these models learn interactions and when these successfully extrapolate to unseen conditions. We therefore study interaction recovery in flow-matching models using a physiological time-series simulator, drug dose-response data, combinatorial cell perturbations, and molecular conformer generations, where we separate recovery from hallucinated interaction structure. In the controlled setting, individual effects are learned much earlier than interactions and models hallucinate interactions where none exist. Across settings, we find qualitatively different generalization problems, with successful prediction depending on whether condition structure continues from observed to held-out targets. When it does, interactions are recoverable. If not, models can generate plausible responses while missing the interaction. We furthermore find that hallucinations increase as targets become less identifiable, and that successful interaction recovery in output space can fail under nonlinear readouts. Finally, we show that aggregate fidelity metrics can conceal whether models learn and extrapolate interactions.

This study investigates the application of deep residual networks for predicting the dynamics of interacting three-dimensional rigid bodies. We present a framework combining a 3D physics simulator implemented in C++ with a deep learning model constructed using PyTorch. The simulator generates training data encompassing linear and angular motion, elastic collisions, fluid friction, gravitational effects, and damping. Our deep residual network, consisting of an input layer, multiple residual blocks, and an output layer, is designed to handle the complexities of 3D dynamics. We evaluate the network's performance using a datasetof 10,000 simulated scenarios, each involving 3-5 interacting rigid bodies. The model achieves a mean squared error of 0.015 for position predictions and 0.022 for orientation predictions, representing a 25% improvement over baseline methods. Our results demonstrate the network's ability to capture intricate physical interactions, with particular success in predicting elastic collisions and rotational dynamics. This work significantly contributes to physics-informed machine learning by showcasing the immense potential of deep residual networks in modeling complex 3D physical systems. We discuss our approach's limitations and propose future directions for improving generalization to more diverse object shapes and materials.

Interactions among features are central to understanding the behavior of machine learning models. Recent research has made significant strides in detecting and quantifying feature interactions in single predictive models. However, we argue that the feature interactions extracted from a single pre-specified model may not be trustworthy since: a well-trained predictive model may not preserve the true feature interactions and there exist multiple well-performing predictive models that differ in feature interaction strengths. Thus, we recommend exploring feature interaction strengths in a model class of approximately equally accurate predictive models. In this work, we introduce the feature interaction score (FIS) in the context of a Rashomon set, representing a collection of models that achieve similar accuracy on a given task. We propose a general and practical algorithm to calculate the FIS in the model class. We demonstrate the properties of the FIS via synthetic data and draw connections to other areas of statistics. Additionally, we introduce a Halo plot for visualizing the feature interaction variance in high-dimensional space and a swarm plot for analyzing FIS in a Rashomon set. Experiments with recidivism prediction and image classification illustrate how feature interactions can vary dramatically in importance for similarly accurate predictive models. Our results suggest that the proposed FIS can provide valuable insights into the nature of feature interactions in machine learning models.

Robust advances in interactome analysis demand comprehensive, non-redundant and consistently annotated datasets. By non-redundant, we mean that the accounting of evidence for every interaction should be faithful: each independent experimental support is counted exactly once, no more, no less. While many interactions are shared among public repositories, none of them contains the complete known interactome for any model organism. In addition, the annotations of the same experimental result by different repositories often disagree. This brings up the issue of which annotation to keep while consolidating evidences that are the same. The iRefIndex database, including interactions from most popular repositories with a standardized protein nomenclature, represents a significant advance in all aspects, especially in comprehensiveness. However, iRefIndex aims to maintain all information/annotation from original sources and requires users to perform additional processing to fully achieve the aforementioned goals. To address issues with iRefIndex and to achieve our goals, we have developed ppiTrim, a script that processes iRefIndex to produce non-redundant, consistently annotated datasets of physical interactions. Our script proceeds in three stages: mapping all interactants to gene identifiers and removing all undesired raw interactions, deflating potentially expanded complexes, and reconciling for each interaction the annotation labels among different source databases. As an illustration, we have processed the three largest organismal datasets: yeast, human and fruitfly. While ppiTrim can resolve most apparent conflicts between different labelings, we also discovered some unresolvable disagreements mostly resulting from different annotation policies among repositories. URL: http://www.ncbi.nlm.nih.gov/CBBresearch/Yu/downloads/ppiTrim.html

Partial correlations quantify linear association between two variables adjusting for the influence of the remaining variables. They form the backbone for graphical models and are readily obtained from the inverse of the covariance matrix. For compositional data, the covariance structure is specified from log ratios of variables, so unless we try to "open" the data via a normalization, this implies changes in the definition and interpretation of partial correlations. In the present work, we elucidate how results derived by Aitchison (1986) lead to a natural definition of partial correlation that has a number of advantages over current measures of association. For this, we show that the residuals of log-ratios between a variable with a reference, when adjusting for all remaining variables including the reference, are reference-independent. Since the reference itself can be controlled for, correlations between residuals are defined for the variables directly without the necessity to recur to ratios except when specifying which variables are partialled out. Thus, perhaps surprisingly, partial correlations do not have the problems commonly found with measures of pairwise association on compositional data. They are well-defined between two variables, are properly scaled, and allow for negative association. By design, they are subcompositionally incoherent, but they share this property with conventional partial correlations (where results change when adjusting for the influence of fewer variables). We discuss the equivalence with normalization-based approaches whenever the normalizing variables are controlled for. We also discuss the partial variances and correlations we obtain from a previously studied data set of Roman glass cups.

Deep research agents powered by Large Language Models (LLMs) can perform multi-step reasoning, web exploration, and long-form report generation. However, most existing systems operate in an autonomous manner, assuming fully specified user intent and evaluating only final outputs. In practice, research goals are often underspecified and evolve during exploration, making sustained interaction essential for robust alignment. Despite its importance, interaction remains largely invisible to existing deep research benchmarks, which neither model dynamic user feedback nor quantify its costs. We introduce IDRBench, the first benchmark for systematically evaluating interactive deep research. IDRBench combines a modular multi-agent research framework with on-demand interaction, a scalable reference-grounded user simulator, and an interaction-aware evaluation suite that jointly measures interaction benefits (quality and alignment) and costs (turns and tokens). Experiments across seven state-of-the-art LLMs show that interaction consistently improves research quality and robustness, often outweighing differences in model capacity, while revealing substantial trade-offs in interaction efficiency.

Predicting single-cell responses to genetic and chemical perturbations is important for understanding regulatory mechanisms and prioritizing therapeutic interventions. Existing methods have made progress by modeling perturbation-conditioned expression shifts with neural networks, graph priors, foundation-model representations, or distributional generative models. However, combinatorial perturbation prediction remains challenging because much of the response can be explained by additive single-perturbation effects, while the biologically informative signal often lies in a smaller non-additive residual induced by perturbation interactions. Directly generating the full post-perturbation expression profile may therefore allocate substantial capacity to the dominant additive component and underemphasize synergy-specific structure. To address this issue, we propose SynGeneFlow, a synergy-aware flow matching framework that anchors the source distribution at an additive prior and learns a residual flow toward the true perturbed state. SynGeneFlow further incorporates perturbation-conditioned gene interaction modeling, where a static gene-gene mask provides biological structure and a perturbation-dependent deformation bias dynamically modulates gene-gene coupling. To preserve population-level response structure, we align both endpoint distributions and biological residual distributions with MMD-based regularization. We evaluate SynGeneFlow on genetic and drug perturbation benchmarks under observed-single, held-out, and cross-modality settings. The results demonstrate that residualizing flow matching around additive perturbation effects provides a biologically grounded and robust framework for single-cell perturbation response prediction.

While Late Interaction models exhibit strong retrieval performance, many of their underlying dynamics remain understudied, potentially hiding performance bottlenecks. In this work, we focus on two topics in Late Interaction retrieval: a length bias that arises when using multi-vector scoring, and the similarity distribution beyond the best scores pooled by the MaxSim operator. We analyze these behaviors for state-of-the-art models on the NanoBEIR benchmark. Results show that while the theoretical length bias of causal Late Interaction models holds in practice, bi-directional models can also suffer from it in extreme cases. We also note that no significant similarity trend lies beyond the top-1 document token, validating that the MaxSim operator efficiently exploits the token-level similarity scores.

Data-driven modeling in real-world regression tasks often suffers from limited training samples, high collection costs, and noisy observations. Inspired by the impact of data augmentation in vision and language, we propose a novel Counterfactual Residual Data Augmentation (CRDA) technique for tabular regression. Our key insight is that once a regressor has modeled the systematic component of the data, the remaining noise can be viewed as an invariant residual that remains stable under small perturbations of carefully selected features. We exploit this residual invariance to generate new, yet realistic, training samples, effectively expanding the dataset without requiring additional real data. Our method is model-agnostic and readily applicable to various types of regressors. In experiments across datasets from a variety of benchmark repositories, on average, CRDA reduces an MLP Regressor's MSE by 22.9% and an XGBoost Regressor's MSE by 6.4%. When compared to existing state-of-the-art data generators and augmentation techniques, CRDA consistently outperforms in MSE reduction. By adding principled counterfactual variations to the training data, our method offers a simple and efficient remedy for noise-prone, small-sample regression settings.

In this paper, we introduce the idea of decomposing the residuals of regression with respect to the data instances instead of features. This allows us to determine the effects of each individual instance on the model and each other, and in doing so makes for a model-agnostic method of identifying instances of interest. In doing so, we can also determine the appropriateness of the model and data in the wider context of a given study. The paper focuses on the possible applications that such a framework brings to the relatively unexplored field of instance analysis in the context of Explainable AI tasks.

Spatial return models take the interaction matrix as given and leave feedback uninterpreted. We construct a bandwidth-free field from firms' language-model article embedding distributions using target-anchored Wasserstein barycentric reconstruction. A quadratic exposure-adjustment problem maps feedback into a peer-misalignment penalty ratio. For 52 firms, the field, frozen from 2018-2022 news, yields a 2023-2026 penalty ratio of 3.46 (95% interval [2.89, 4.17]) and higher conditional quasi-likelihood than equal-weighted peer support or RBF weighting of the same distances. Joint penalty ratios for the barycentric and news co-mention fields are 2.33 and 0.86 with boundary calibrated tests which reject both exclusions.

In many machine learning systems that jointly learn from multiple modalities, a core research question is to understand the nature of multimodal interactions: the emergence of new task-relevant information during learning from both modalities that was not present in either alone. We study this challenge of interaction quantification in a semi-supervised setting with only labeled unimodal data and naturally co-occurring multimodal data (e.g., unlabeled images and captions, video and corresponding audio) but when labeling them is time-consuming. Using a precise information-theoretic definition of interactions, our key contributions are the derivations of lower and upper bounds to quantify the amount of multimodal interactions in this semi-supervised setting. We propose two lower bounds based on the amount of shared information between modalities and the disagreement between separately trained unimodal classifiers, and derive an upper bound through connections to approximate algorithms for min-entropy couplings. We validate these estimated bounds and show how they accurately track true interactions. Finally, two semi-supervised multimodal applications are explored based on these theoretical results: (1) analyzing the relationship between multimodal performance and estimated interactions, and (2) self-supervised learning that embraces disagreement between modalities beyond agreement as is typically done.

Neural information retrieval (IR) has greatly advanced search and other knowledge-intensive language tasks. While many neural IR methods encode queries and documents into single-vector representations, late interaction models produce multi-vector representations at the granularity of each token and decompose relevance modeling into scalable token-level computations. This decomposition has been shown to make late interaction more effective, but it inflates the space footprint of these models by an order of magnitude. In this work, we introduce ColBERTv2, a retriever that couples an aggressive residual compression mechanism with a denoised supervision strategy to simultaneously improve the quality and space footprint of late interaction. We evaluate ColBERTv2 across a wide range of benchmarks, establishing state-of-the-art quality within and outside the training domain while reducing the space footprint of late interaction models by 6--10times.

Debates about whether development projects improve living conditions persist, partly because observational estimates can be biased by incomplete adjustment and because reliable outcome data are scarce at the neighborhood level. We address both issues in a continent-scale, sector-specific evaluation of Chinese and World Bank projects across 9,899 neighborhoods in 36 African countries (2002 to 2013), representative of 88% of the population. First, we use a recent dataset that measures living conditions with a machine-learned wealth index derived from contemporaneous satellite imagery, yielding a consistent panel of 6.7 km square mosaics. Second, to strengthen identification, we proxy officials' map-based placement criteria using pre-treatment daytime satellite images and fuse these with rich tabular covariates to estimate funder- and sector-specific ATEs via inverse-probability weighting. Incorporating imagery systematically shrinks effects relative to tabular-only models, indicating prior work likely overstated benefits. On average, both donors raise wealth, with larger gains for China; sector extremes in our sample include Trade and Tourism for the World Bank (+6.27 IWI points), and Emergency Response for China (+14.32). Assignment-mechanism analyses show World Bank placement is generally more predictable from imagery alone, as well as from tabular covariates. This suggests that Chinese project placements are more driven by non-visible, political, or event-driven factors than World Bank placements. To probe residual concerns about selection on observables, we also estimate within-neighborhood (unit) fixed-effects models at a spatial resolution about 450 times finer than prior fixed effects analyses, leveraging the computer-vision-imputed IWI panels; these deliver smaller but directionally consistent effects.

A benchmark score compares a system output against a reference, and methodological attention falls almost entirely on the first term. We measure the second. The retained annotation record of a six-language benchmark for personally identifiable information contains two independent annotator labellings, the aggregate shipped as gold, and a reviewer gold from independent expert re-annotation of a sample. Using it, we hold the scored output fixed and exchange the reference. The score moves by 4.95 F1 points for one output and 2.00 for the other (95% CIs [3.23, 6.27] and [0.26, 3.37]), and by 7.55 in the worst language. The comparison between two outputs moves as well: the paired interaction between reference and system is +2.95 points (CI [+1.97, +3.87]), survives correction for multiple testing, and changes one language's margin outright. The cause is an undocumented aggregation default that usually kept one annotator when adjudication did not fire, making the shipped reference a partial copy of an output being scored. We report the resulting reference-sensitivity band, show how to compute one from any retained annotation record, and argue that the quantity belongs beside the score.

Language agents have demonstrated remarkable potential in web search and information retrieval. However, these search agents assume user queries are complete and unambiguous, an assumption that diverges from reality where users begin with incomplete queries requiring clarification through interaction. Yet most agents lack interactive mechanisms during the search process, and existing benchmarks cannot assess this capability. To address this gap, we introduce InteractComp, a benchmark designed to evaluate whether search agents can recognize query ambiguity and actively interact to resolve it during search. Following the principle of easy to verify, interact to disambiguate, we construct 210 expert-curated questions across 9 domains through a target-distractor methodology that creates genuine ambiguity resolvable only through interaction. Evaluation of 17 models reveals striking failure: the best model achieves only 13.73% accuracy despite 71.50% with complete context, exposing systematic overconfidence rather than reasoning deficits. Forced interaction produces dramatic gains, demonstrating latent capability current strategies fail to engage. Longitudinal analysis shows interaction capabilities stagnated over 15 months while search performance improved seven-fold, revealing a critical blind spot. This stagnation, coupled with the immediate feedback inherent to search tasks, makes InteractComp a valuable resource for both evaluating and training interaction capabilities in search agents. The code is available at https://github.com/FoundationAgents/InteractComp.

Sequential trial emulation (STE) estimates the effect of a sustained treatment by stacking nested emulated trials with inverse-probability weighting. Additive-hazards STE estimators of the marginal risk difference recommend the nonparametric bootstrap without evaluating its coverage. Using a correctly-specifiable mechanism (up to a small, disclosed residual), we compare analytic and bootstrap standard errors for both estimands. Exploiting the closed-form linearity of the additive-hazards estimating equation, we derive the influence functions and prove the default row-level robust variance inconsistent for the marginal risk-difference curve, and show the same failure empirically for the constant hazard difference: the row-level variance omits a within-subject cross-trial covariance that is positive under a sign condition we verify across our mechanisms, and is anticonservative at every horizon except the first - only there, where the covariance is zero, is the row-level standard error unimpaired. The subject-clustered variance and multiplier bootstrap are consistent for the fixed-weight linearisation and support simultaneous confidence bands, whose measured coverage is 0.88. Across our simulations the model-based and row-level robust intervals are anticonservative and worsen with sample size, coverage falling to 0.71 at n=5000; clustering leaves the constant-hazard-difference coverage near 0.86 at n=5000, and the multiplier bootstrap leaves the risk-difference-curve coverage near 0.90 (0.86 at the longest horizon). The STE constant hazard difference is a design-weighted summary of a time-varying effect, dependent on the trial structure. We illustrate on the Stanford heart transplant data and provide them in the steCI R package.

This article presents Individual Conditional Expectation (ICE) plots, a tool for visualizing the model estimated by any supervised learning algorithm. Classical partial dependence plots (PDPs) help visualize the average partial relationship between the predicted response and one or more features. In the presence of substantial interaction effects, the partial response relationship can be heterogeneous. Thus, an average curve, such as the PDP, can obfuscate the complexity of the modeled relationship. Accordingly, ICE plots refine the partial dependence plot by graphing the functional relationship between the predicted response and the feature for individual observations. Specifically, ICE plots highlight the variation in the fitted values across the range of a covariate, suggesting where and to what extent heterogeneities might exist. In addition to providing a plotting suite for exploratory analysis, we include a visual test for additive structure in the data generating model. Through simulated examples and real data sets, we demonstrate how ICE plots can shed light on estimated models in ways PDPs cannot. Procedures outlined are available in the R package ICEbox.

Click-through rate prediction is one of the core tasks in commercial recommender systems. It aims to predict the probability of a user clicking a particular item given user and item features. As feature interactions bring in non-linearity, they are widely adopted to improve the performance of CTR prediction models. Therefore, effectively modelling feature interactions has attracted much attention in both the research and industry field. The current approaches can generally be categorized into three classes: (1) na\"ive methods, which do not model feature interactions and only use original features; (2) memorized methods, which memorize feature interactions by explicitly viewing them as new features and assigning trainable embeddings; (3) factorized methods, which learn latent vectors for original features and implicitly model feature interactions through factorization functions. Studies have shown that modelling feature interactions by one of these methods alone are suboptimal due to the unique characteristics of different feature interactions. To address this issue, we first propose a general framework called OptInter which finds the most suitable modelling method for each feature interaction. Different state-of-the-art deep CTR models can be viewed as instances of OptInter. To realize the functionality of OptInter, we also introduce a learning algorithm that automatically searches for the optimal modelling method. We conduct extensive experiments on four large datasets. Our experiments show that OptInter improves the best performed state-of-the-art baseline deep CTR models by up to 2.21%. Compared to the memorized method, which also outperforms baselines, we reduce up to 91% parameters. In addition, we conduct several ablation studies to investigate the influence of different components of OptInter. Finally, we provide interpretable discussions on the results of OptInter.

AI research agents need reliable knowledge of how their experiments change outcomes. We introduce WhatWorkedBench to measure experimental understanding, the accuracy of predictions about component changes after budgeted experimentation. Agents inspect code, select measurements, and submit a response surface, a table predicting scores for every configuration of component settings. Exhaustive CPU execution supplies reference effects for changing each component while holding the others fixed. These effects capture combinations of changes across 36 tasks from 30 data sources and 8 workflow types, with 1248 configuration records. Core evaluation combines 4,206 numerical-control records across all eight families and 108 agent episodes across the original six. At eight new measurements, pair-effect ridge selects an optimum on 15 of 22 sources and limits every effect error to 10% of score range on three. Fitting a Gaussian process (GP) to the same agent observations raises effect recovery, accuracy relative to true effect magnitude, from 0.632 to 0.698 in the original Flash cohort and from 0.621 to 0.720 in an additional cohort. On six completed beat-detection and graph submissions, the same-observation GP raises family-macro recovery from 0.303 to 0.455. On six workflows with six binary options at 20 new measurements, encoding code equivalences, configurations with identical behavior, raises GP recovery from 0.248 to 0.462. WhatWorkedBench supports research on experimental agents, adaptive experimental design, numerical inference, and use of program structure.

We have tried to reproduce the results of the paper "Natural Language Inference over Interaction Space" submitted to ICLR 2018 conference as part of the ICLR 2018 Reproducibility Challenge. Initially, we were not aware that the code was available, so we started to implement the network from scratch. We have evaluated our version of the model on Stanford NLI dataset and reached 86.38% accuracy on the test set, while the paper claims 88.0% accuracy. The main difference, as we understand it, comes from the optimizers and the way model selection is performed.

Perception of toxicity evolves over time and often differs between geographies and cultural backgrounds. Similarly, black-box commercially available APIs for detecting toxicity, such as the Perspective API, are not static, but frequently retrained to address any unattended weaknesses and biases. We evaluate the implications of these changes on the reproducibility of findings that compare the relative merits of models and methods that aim to curb toxicity. Our findings suggest that research that relied on inherited automatic toxicity scores to compare models and techniques may have resulted in inaccurate findings. Rescoring all models from HELM, a widely respected living benchmark, for toxicity with the recent version of the API led to a different ranking of widely used foundation models. We suggest caution in applying apples-to-apples comparisons between studies and lay recommendations for a more structured approach to evaluating toxicity over time. Code and data are available at https://github.com/for-ai/black-box-api-challenges.

Exposing meaningful and interpretable neural interactions is critical to understanding neural circuits. Inferred neural interactions from neural signals primarily reflect functional interactions. In a long experiment, subject animals may experience different stages defined by the experiment, stimuli, or behavioral states, and hence functional interactions can change over time. To model dynamically changing functional interactions, prior work employs state-switching generalized linear models with hidden Markov models (i.e., HMM-GLMs). However, we argue they lack biological plausibility, as functional interactions are shaped and confined by the underlying anatomical connectome. Here, we propose a novel prior-informed state-switching GLM. We introduce both a Gaussian prior and a one-hot prior over the GLM in each state. The priors are learnable. We will show that the learned prior should capture the state-constant interaction, shedding light on the underlying anatomical connectome and revealing more likely physical neuron interactions. The state-dependent interaction modeled by each GLM offers traceability to capture functional variations across multiple brain states. Our methods effectively recover true interaction structures in simulated data, achieve the highest predictive likelihood with real neural datasets, and render interaction structures and hidden states more interpretable when applied to real neural data.

Backward compatibility of model predictions is a desired property when updating a machine learning driven application. It allows to seamlessly improve the underlying model without introducing regression bugs. In classification tasks these bugs occur in the form of negative flips. This means an instance that was correctly classified by the old model is now classified incorrectly by the updated model. This has direct negative impact on the user experience of such systems e.g. a frequently used voice assistant query is suddenly misclassified. A common reason to update the model is when new training data becomes available and needs to be incorporated. Simply retraining the model with the updated data introduces the unwanted negative flips. We study the problem of regression during data updates and propose Backward Compatible Weight Interpolation (BCWI). This method interpolates between the weights of the old and new model and we show in extensive experiments that it reduces negative flips without sacrificing the improved accuracy of the new model. BCWI is straight forward to implement and does not increase inference cost. We also explore the use of importance weighting during interpolation and averaging the weights of multiple new models in order to further reduce negative flips.

Reconstructing interacting hands from monocular images is indispensable in AR/VR applications. Most existing solutions rely on the accurate localization of each skeleton joint. However, these methods tend to be unreliable due to the severe occlusion and confusing similarity among adjacent hand parts. This also defies human perception because humans can quickly imitate an interaction pattern without localizing all joints. Our key idea is to first construct a two-hand interaction prior and recast the interaction reconstruction task as the conditional sampling from the prior. To expand more interaction states, a large-scale multimodal dataset with physical plausibility is proposed. Then a VAE is trained to further condense these interaction patterns as latent codes in a prior distribution. When looking for image cues that contribute to interaction prior sampling, we propose the interaction adjacency heatmap (IAH). Compared with a joint-wise heatmap for localization, IAH assigns denser visible features to those invisible joints. Compared with an all-in-one visible heatmap, it provides more fine-grained local interaction information in each interaction region. Finally, the correlations between the extracted features and corresponding interaction codes are linked by the ViT module. Comprehensive evaluations on benchmark datasets have verified the effectiveness of this framework. The code and dataset are publicly available at https://github.com/binghui-z/InterPrior_pytorch

While large-scale human motion capture datasets have advanced human motion generation, modeling and generating dynamic 3D human-object interactions (HOIs) remain challenging due to dataset limitations. Existing datasets often lack extensive, high-quality motion and annotation and exhibit artifacts such as contact penetration, floating, and incorrect hand motions. To address these issues, we introduce InterAct, a large-scale 3D HOI benchmark featuring dataset and methodological advancements. First, we consolidate and standardize 21.81 hours of HOI data from diverse sources, enriching it with detailed textual annotations. Second, we propose a unified optimization framework to enhance data quality by reducing artifacts and correcting hand motions. Leveraging the principle of contact invariance, we maintain human-object relationships while introducing motion variations, expanding the dataset to 30.70 hours. Third, we define six benchmarking tasks and develop a unified HOI generative modeling perspective, achieving state-of-the-art performance. Extensive experiments validate the utility of our dataset as a foundational resource for advancing 3D human-object interaction generation. To support continued research in this area, the dataset is publicly available at https://github.com/wzyabcas/InterAct, and will be actively maintained.

The influential Residual Networks designed by He et al. remain the gold-standard architecture in numerous scientific publications. They typically serve as the default architecture in studies, or as baselines when new architectures are proposed. Yet there has been significant progress on best practices for training neural networks since the inception of the ResNet architecture in 2015. Novel optimization & data-augmentation have increased the effectiveness of the training recipes. In this paper, we re-evaluate the performance of the vanilla ResNet-50 when trained with a procedure that integrates such advances. We share competitive training settings and pre-trained models in the timm open-source library, with the hope that they will serve as better baselines for future work. For instance, with our more demanding training setting, a vanilla ResNet-50 reaches 80.4% top-1 accuracy at resolution 224x224 on ImageNet-val without extra data or distillation. We also report the performance achieved with popular models with our training procedure.

A longitudinal web crawl is a sequence of partial samples of an evolving URL population. Pairwise containment between two crawls is the standard probe; under a simple urn model of the crawl -- each round samples a fraction of the URLs and replaces a fraction -- it recovers two interpretable rates, per-round survival α and coverage c, but treats the population as uniform and consumes one pair at a time. In this work, we define a formal language for talking about a crawl. We extend this analysis with the discovery curve U(s, T), the cumulative URL footprint over a sliding window of T crawls starting at s, which under the same urn model is also a closed-form function of (α, c). Containment and the discovery curve are then two projections of one process: independent fits agree on (α, c) when the urn is homogeneous, so any disagreement is itself a measurement. Applied to Common Crawl (2020--2025, domain granularity) and to the German Academic Web (GAW, URL granularity), the two projections disagree on both archives, and a two-component urn with a persistent core fraction κ alongside shell parameters (α_partial, c_partial) reconciles the disagreement. A residual on c_partial remains, signaling that the shell itself is not homogeneous; κ is recorded as the scalar entry point to a rank-resolved generalization, which is left to follow-up work. web archive \and crawl coverage \and discovery curve \and urn model \and two-component model \and URL lifetime

Conformal prediction (CP) provides distribution-free prediction intervals for fixed forecasters, but its standard calibration procedure is often inefficient for time series data, where forecast errors are temporally dependent and change across time and operating conditions. Recent time series CP methods improve local calibration using recent, weighted, or localized residuals. Yet local calibration can remain indirect, since broad residual weighting or additional adaptation procedures may dilute the evidence most relevant to the current prediction. This motivates a simple retrieval and correction strategy that selects similar past residuals as local evidence and then corrects the coverage error left by retrieval. In this paper, we propose Retrieval--Corrected Conformal Prediction (RCCP), a retrieval-augmented calibration method for time series prediction intervals. RCCP builds an asymmetric interval from retrieved one-sided residuals and calibrates its normalized retrieval error with a scalar conformal correction. Thus, retrieval provides local residual evidence, while conformal correction determines the final scale needed for coverage. We provide a coverage-gap bound based on the stability of the normalized retrieval error distribution. Across standard benchmarks and backbone forecasters, RCCP attains the target coverage in every setting and achieves the lowest Winkler scores, with fewer severe misses. RCCP also achieves low calibration and inference overhead, showing that retrieval-corrected calibration is an effective and scalable approach to uncertainty quantification in time series forecasting. Code is available at https://github.com/jinsaaang/rccp.

Click-through prediction (CTR) models transform features into latent vectors and enumerate possible feature interactions to improve performance based on the input feature set. Therefore, when selecting an optimal feature set, we should consider the influence of both feature and its interaction. However, most previous works focus on either feature field selection or only select feature interaction based on the fixed feature set to produce the feature set. The former restricts search space to the feature field, which is too coarse to determine subtle features. They also do not filter useless feature interactions, leading to higher computation costs and degraded model performance. The latter identifies useful feature interaction from all available features, resulting in many redundant features in the feature set. In this paper, we propose a novel method named OptFS to address these problems. To unify the selection of feature and its interaction, we decompose the selection of each feature interaction into the selection of two correlated features. Such a decomposition makes the model end-to-end trainable given various feature interaction operations. By adopting feature-level search space, we set a learnable gate to determine whether each feature should be within the feature set. Because of the large-scale search space, we develop a learning-by-continuation training scheme to learn such gates. Hence, OptFS generates the feature set only containing features which improve the final prediction results. Experimentally, we evaluate OptFS on three public datasets, demonstrating OptFS can optimize feature sets which enhance the model performance and further reduce both the storage and computational cost.

Multi-vector late-interaction retrievers such as ColBERT achieve state-of-the-art retrieval quality, but their query-time cost is dominated by exhaustively computing token-level MaxSim interactions for every candidate document. While approximating late interaction with single-vector representations reduces cost, it often incurs substantial accuracy loss. We introduce Col-Bandit, a query-time pruning algorithm that reduces this computational burden by casting reranking as a finite-population Top-K identification problem. Col-Bandit maintains uncertainty-aware bounds over partially observed document scores and adaptively reveals only the (document, query token) MaxSim entries needed to determine the top results under statistical decision bounds with a tunable relaxation. Unlike coarse-grained approaches that prune entire documents or tokens offline, Col-Bandit sparsifies the interaction matrix on the fly. It operates as a zero-shot, drop-in layer over standard multi-vector systems, requiring no index modifications, offline preprocessing, or model retraining. Experiments on textual (BEIR) and multimodal (REAL-MM-RAG) benchmarks show that Col-Bandit preserves ranking fidelity while reducing MaxSim FLOPs by up to 5times, indicating that dense late-interaction scoring contains substantial redundancy that can be identified and pruned efficiently at query time.

Low-Rank Adaptive Residual Connections (LARC) give a frozen model a compact numerical state that can learn from feedback. The map h+BAh adds a low-rank correction to a hidden representation. A slow state ρ learns starting factors across tasks; a private fast state Φ copies them, changes with feedback, and resets to the trained initialization. This report specifies an input-side realization of the numerical policy carrier in Memory-Mediated Learning Architecture and examines its factor-space dynamics and learning lifetime. We study a rank-4 input residual with 12,288 trainable parameters on a frozen MiniCPM5-1B-SFT substrate. In a four-candidate program-selection task, two feedback-gradient steps reduce expected query execution error by 24.65 and 36.65 percentage points relative to resetting to the respective trained static and post-adaptation initializations. These development results cover 16 parameter groups and three paired training seeds. A direct support-loss selection rule is much more accurate, reaching 0.78125% error. In a repository-balanced chronological replay of public continuous-integration jobs, retaining online updates raises half-Brier loss from 0.1274 to 0.1808. A fixed follow-up intervention records same-batch non-descent and inconsistent future benefit from shrinking updates. Together, the algebra and measurements distinguish residual capacity, adaptation relative to a starting point, and usefulness on later decisions.

Computer-use agents (CUAs) automate on-screen work, as illustrated by GPT-5.4 and Claude. Yet their reliability on complex, low-frequency interactions is still poor, limiting user trust. Our analysis of failure cases from advanced models suggests a long-tail pattern in GUI operations, where a relatively small fraction of complex and diverse interactions accounts for a disproportionate share of task failures. We hypothesize that this issue largely stems from the scarcity of data for complex interactions. To address this problem, we propose a new benchmark CUActSpot for evaluating models' capabilities on complex interactions across five modalities: GUI, text, table, canvas, and natural image, as well as a variety of actions (click, drag, draw, etc.), covering a broader range of interaction types than prior click-centric benchmarks that focus mainly on GUI widgets. We also design a renderer-based data-synthesis pipeline: scenes are automatically generated for each modality, screenshots and element coordinates are recorded, and an LLM produces matching instructions and action traces. After training on this corpus, our Phi-Ground-Any-4B outperforms open-source models with fewer than 32B parameters. We will release our benchmark, data, code, and models at https://github.com/microsoft/Phi-Ground.git

User-item interaction histories are pivotal for sequential recommendation systems but often include noise, such as unintended clicks or actions that fail to reflect genuine user preferences. To address this issue, we propose the User-Consistent Preference-based Sequential Recommendation System (ConsRec), designed to capture stable user preferences and filter noisy items from interaction histories. Specifically, ConsRec constructs a user-interacted item graph, learns item similarities from their text representations, and then extracts the maximum connected subgraph from the user-interacted item graph for denoising items. Experimental results on the Yelp and Amazon Product datasets illustrate that ConsRec achieves a 13% improvement over baseline recommendation models, showing its effectiveness in denoising user-interacted items. Further analysis reveals that the denoised interaction histories form semantically tighter clusters of user-preferred items, leading to higher relevance scores for ground-truth targets and more accurate recommendations. All codes are available at https://github.com/NEUIR/ConsRec.

Relevance is a query-dependent estimate of whether a document or excerpt contains useful evidence. Existing retrieval agents use relevance to select top-k content, but document relevance alone cannot localize, compose, or verify the evidence required by complex questions. Direct Corpus Interaction (DCI) enables such fine-grained operations through grep-style exploration, but its relevance-agnostic search can expose useful clues late and delay convergence. Recent advances use relevance to narrow the corpus into a working space for interaction. Once interaction begins, however, relevance still does not directly guide which documents grep searches first or distinguish informative excerpts from a broad set of matches to let LLMs see them first. We introduce the Relevance-Aware RipGrep Search Agent (RARG), which turns relevance into an execution prior for corpus interaction. RARG provides coarse-to-fine relevance guidance: it orders documents for sequential 'ripgrep' traversal to expose globally relevant clues earlier, initializes promising entry points with query-relevant paragraphs, and reranks grep matches to surface informative excerpts that document-level ranking may otherwise obscure. Across challenging browse question answering and reasoning-intensive retrieval, RARG improves the accuracy--efficiency frontier over retrieval-based and direct-interaction agents. These results demonstrate that relevance-aware interaction enables faster and more reliable search convergence.

This paper proposes a method for the automatic creation of variables (in the case of regression) that complement the information contained in the initial input vector. The method works as a pre-processing step in which the continuous values of the variable to be regressed are discretized into a set of intervals which are then used to define value thresholds. Then classifiers are trained to predict whether the value to be regressed is less than or equal to each of these thresholds. The different outputs of the classifiers are then concatenated in the form of an additional vector of variables that enriches the initial vector of the regression problem. The implemented system can thus be considered as a generic pre-processing tool. We tested the proposed enrichment method with 5 types of regressors and evaluated it in 33 regression datasets. Our experimental results confirm the interest of the approach.

With the sheer constant advancements raining down in the field of Artificial Intelligence, one particular possibility that may cross our mind is whether it is possible to model agents after humans and, in turn, use these agents to carry out synthetic interactions that predict their real counterparts, or even interactions at a larger scale such as groups or societies. In this paper, we test a more controlled version of this question through chess. We use 8 elite chess players, seal their direct pairwise games, learn each player independently using different methods, and then compose the resulting models on the withheld dyads. To evaluate the generated interactions, we use two measurements: opening-family total variation distance and win-draw-loss (WDL) total variation distance. M1 reduces WDL-TV while leaving opening-family TV largely unchanged, whereas M2 substantially reduces opening-family TV while having little effect on WDL-TV. An additional post-hoc method combining components of the other two retains improvements across both measurements. These results suggest that independently learned models can recover aspects of previously unseen interactions, and that recovery across different behavioural aspects need not be mutually exclusive.

Deep sparse networks are widely investigated as a neural network architecture for prediction tasks with high-dimensional sparse features, with which feature interaction selection is a critical component. While previous methods primarily focus on how to search feature interaction in a coarse-grained space, less attention has been given to a finer granularity. In this work, we introduce a hybrid-grained feature interaction selection approach that targets both feature field and feature value for deep sparse networks. To explore such expansive space, we propose a decomposed space which is calculated on the fly. We then develop a selection algorithm called OptFeature, which efficiently selects the feature interaction from both the feature field and the feature value simultaneously. Results from experiments on three large real-world benchmark datasets demonstrate that OptFeature performs well in terms of accuracy and efficiency. Additional studies support the feasibility of our method.

Large Language Models (LLMs) have emerged as a new paradigm for recommendation by converting interacted item history into language modeling. However, constrained by the limited context length of LLMs, existing approaches have to truncate item history in the prompt, focusing only on recent interactions and sacrificing the ability to model long-term history. To enable LLMs to model long histories, we pursue a concise embedding representation for items and sessions. In the LLM embedding space, we construct an item's embedding by aggregating its textual token embeddings; similarly, we construct a session's embedding by aggregating its item embeddings. While efficient, this way poses two challenges since it ignores the temporal significance of user interactions and LLMs do not natively interpret our custom embeddings. To overcome these, we propose PatchRec, a multi-grained patch training method consisting of two stages: (1) Patch Pre-training, which familiarizes LLMs with aggregated embeddings -- patches, and (2) Patch Fine-tuning, which enables LLMs to capture time-aware significance in interaction history. Extensive experiments show that PatchRec effectively models longer behavior histories with improved efficiency. This work facilitates the practical use of LLMs for modeling long behavior histories. Codes are available at https://github.com/ljy0ustc/PatchRec.

Benchmark contamination is diagnosed with n-gram overlap, likelihood-based membership inference, or canary strings, and each needs something usually unavailable: the training corpus, a well-chosen test statistic, or foresight at release. A recent alternative reads it off a linear probe on internal activations. We show the natural way to do this does not work, specify one that survives measurement, then find that the correction making it work carries more variance than the null it is tested against. The protocol reports a zero-sum contrast on the depth profile of probe accuracy, recentred on a level-matched placebo baseline, tested against a label-permutation null, with the reference set twice the size of the suspect set. Each choice replaces a simpler alternative we rejected on measurement. Reporting the level of excess separability rather than its shape makes the false positive rate track the size of the analyst's own control set, 0.03 to 0.99 under a true null. Contrasting against a flat depth profile rejects a true null 0.72 of the time when surface decodability rises with depth, and loses all power when it falls. On real transformers the protocol fails a test the simulations did not pose. The recentring subtracts an estimate, and the permutation null holds it fixed. Re-estimated across split seeds on four audits of contaminated checkpoints, its standard deviation is 1.30 to 1.56 times the null's own in every arm: what is subtracted to remove a bias is more variable than what it corrects. The one nominally significant result, p = 0.0075, becomes 0.0745 once that variance is propagated, and no verdict is issued. The simulations missed this because their surface key is the covariate driving item variation; on real text it is a proxy, and degrading key quality in simulation reproduces it. We add a companion measurement and a widened null. No arm shows contamination.

Cross-encoders deliver state-of-the-art ranking effectiveness in information retrieval, but have a high inference cost. This prevents them from being used as first-stage rankers, but also incurs a cost when re-ranking documents. Prior work has addressed this bottleneck from two largely separate directions: accelerating cross-encoder inference by sparsifying the attention process or improving first-stage retrieval effectiveness using more complex models, e.g. late-interaction ones. In this work, we propose to bridge these two approaches, based on an in-depth understanding of the internal mechanisms of cross-encoders. Starting from cross-encoders, we show that it is possible to derive a new late-interaction-like architecture by carefully removing detrimental or unnecessary interactions. We name this architecture MICE (Minimal Interaction Cross-Encoders). We extensively evaluate MICE across both in-domain (ID) and out-of-domain (OOD) datasets. MICE decreases fourfold the inference latency compared to standard cross-encoders, matching late-interaction models like ColBERT while retaining most of cross-encoder ID effectiveness and demonstrating superior generalization abilities in OOD.

Multitask Gaussian process (MTGP) is powerful for joint learning of multiple tasks with complicated correlation patterns. However, due to the assembling of additive independent latent functions, all current MTGPs including the salient linear model of coregionalization (LMC) and convolution frameworks cannot effectively represent and learn the hierarchical latent interactions between its latent functions. In this paper, we further investigate the interactions in LMC of MTGP and then propose a novel kernel representation of the hierarchical interactions, which ameliorates both the expressiveness and the interpretability of MTGP. Specifically, we express the interaction as a product of function interaction and coefficient interaction. The function interaction is modeled by using cross convolution of latent functions. The coefficient interaction between the LMCs is described as a cross coregionalization term. We validate that considering the interactions can promote knowledge transferring in MTGP and compare our approach with some state-of-the-art MTGPs on both synthetic- and real-world datasets.

The problem of data sparsity has long been a challenge in recommendation systems, and previous studies have attempted to address this issue by incorporating side information. However, this approach often introduces side effects such as noise, availability issues, and low data quality, which in turn hinder the accurate modeling of user preferences and adversely impact recommendation performance. In light of the recent advancements in large language models (LLMs), which possess extensive knowledge bases and strong reasoning capabilities, we propose a novel framework called LLMRec that enhances recommender systems by employing three simple yet effective LLM-based graph augmentation strategies. Our approach leverages the rich content available within online platforms (e.g., Netflix, MovieLens) to augment the interaction graph in three ways: (i) reinforcing user-item interaction egde, (ii) enhancing the understanding of item node attributes, and (iii) conducting user node profiling, intuitively from the natural language perspective. By employing these strategies, we address the challenges posed by sparse implicit feedback and low-quality side information in recommenders. Besides, to ensure the quality of the augmentation, we develop a denoised data robustification mechanism that includes techniques of noisy implicit feedback pruning and MAE-based feature enhancement that help refine the augmented data and improve its reliability. Furthermore, we provide theoretical analysis to support the effectiveness of LLMRec and clarify the benefits of our method in facilitating model optimization. Experimental results on benchmark datasets demonstrate the superiority of our LLM-based augmentation approach over state-of-the-art techniques. To ensure reproducibility, we have made our code and augmented data publicly available at: https://github.com/HKUDS/LLMRec.git

Large language models are being widely used across industries to generate content that contributes directly to key performance metrics, such as conversion rates. Pretrained models, however, often fall short when it comes to aligning with human preferences or optimizing for business objectives. As a result, fine-tuning with good-quality labeled data is essential to guide models to generate content that achieves better results. Controlled experiments, like A/B tests, can provide such data, but they are often expensive and come with significant engineering and logistical challenges. Meanwhile, companies have access to a vast amount of historical (observational) data that remains underutilized. In this work, we study the challenges and opportunities of fine-tuning LLMs using observational data. We show that while observational outcomes can provide valuable supervision, directly fine-tuning models on such data can lead them to learn spurious correlations. We present empirical evidence of this issue using various real-world datasets and propose DeconfoundLM, a method that explicitly removes the effect of known confounders from reward signals. Using simulation experiments, we demonstrate that DeconfoundLM improves the recovery of causal relationships and mitigates failure modes found in fine-tuning methods that ignore or naively incorporate confounding variables. Our findings highlight that while observational data presents risks, with the right causal corrections, it can be a powerful source of signal for LLM alignment. Please refer to the project page for code and related resources.

We address the problem of accurate capture and expressive modelling of interactive behaviors happening between two persons in daily scenarios. Different from previous works which either only consider one person or focus on conversational gestures, we propose to simultaneously model the activities of two persons, and target objective-driven, dynamic, and coherent interactions which often span long duration. To this end, we capture a new dataset dubbed InterAct, which is composed of 241 motion sequences where two persons perform a realistic scenario over the whole sequence. The audios, body motions, and facial expressions of both persons are all captured in our dataset. We also demonstrate the first diffusion model based approach that directly estimates the interactive motions between two persons from their audios alone. All the data and code will be available at: https://hku-cg.github.io/interact.

A research proposal can describe an established mechanism correctly while claiming to introduce it. We study whether providing the earlier paper corrects such contribution claims. Three controlled experiments compare proposals generated with a contribution-bearing prior and a same-topic control. Providing the prior yields no clear aggregate reduction in unsupported novelty. Human analysis of 175 interpretable exposed proposals finds that 137 recognize the prior's relevance, but 61 correctly attribute the established contribution. Of 71 proposed remaining distinctions, 37 are covered by the same prior. We introduce Research Idea Novelty Inspection (RINI), which audits contribution claims against evidence, checks the remaining distinction, and applies local revisions. Five human annotators evaluate 1,080 original-revision pairs across three methods. On the same 240 originals judged to require correction, successful repair is 11.7% for Self-Revision, 39.1% for Retrieve-and-Revise, and 72.2% for RINI, with research tasks weighted equally. The improvement over same-evidence direct revision is 33.0 percentage points. The revised proposals retain their research questions and technical methods. These results motivate explicit contribution attribution when using literature to generate and revise research proposals.

Reproducible and analytically robust research findings are essential to scientific progress, but evaluating these properties typically requires costly manual effort. We investigate whether LLM agents can help automate reproduction and robustness analysis, using a medical case study grounded in the Surveillance, Epidemiology, and End Results (SEER) database, a widely used U.S. cancer registry underlying tens of thousands of published studies. First, we introduce SEER-Repro, a benchmark of 20 published SEER-based papers together with the data and resources required to reproduce their findings. Second, we create an AI agent that successfully reproduces 77.4% of 2,190 atomic claims, while providing executable baselines for further analysis. Third, we develop an agentic analysis pipeline to test the robustness of the medical findings by identifying analytical choices underlying each finding, proposing defensible alternatives, and rerunning the analysis to determine whether those choices affect the conclusion. Across published papers in SEER-Repro, our pipeline identifies potentially consequential analytical choices in 9.5% of fully reproduced findings and flags them for expert review. These results show how LLM agents can support scientific review by reproducing findings, systematically testing their robustness, and directing expert attention toward potentially consequential analytical choices.

Autonomous agents powered by large language models (LLMs) have the potential to enhance human capabilities, assisting with digital tasks from sending emails to performing data analysis. The abilities of existing LLMs at such tasks are often hindered by the lack of high-quality agent data from the corresponding environments they interact with. We propose Learn-by-interact, a data-centric framework to adapt LLM agents to any given environments without human annotations. Learn-by-interact synthesizes trajectories of agent-environment interactions based on documentations, and constructs instructions by summarizing or abstracting the interaction histories, a process called backward construction. We assess the quality of our synthetic data by using them in both training-based scenarios and training-free in-context learning (ICL), where we craft innovative retrieval approaches optimized for agents. Extensive experiments on SWE-bench, WebArena, OSWorld and Spider2-V spanning across realistic coding, web, and desktop environments show the effectiveness of Learn-by-interact in various downstream agentic tasks -- baseline results are improved by up to 12.2\% for ICL with Claude-3.5 and 19.5\% for training with Codestral-22B. We further demonstrate the critical role of backward construction, which provides up to 14.0\% improvement for training. Our ablation studies demonstrate the efficiency provided by our synthesized data in ICL and the superiority of our retrieval pipeline over alternative approaches like conventional retrieval-augmented generation (RAG). We expect that Learn-by-interact will serve as a foundation for agent data synthesis as LLMs are increasingly deployed at real-world environments.

AI agents are increasingly being deployed to automate tasks, often based on underspecified user instructions. Making unwarranted assumptions to compensate for the missing information and failing to ask clarifying questions can lead to suboptimal outcomes, safety risks due to tool misuse, and wasted computational resources. In this work, we study the ability of LLM agents to handle underspecified instructions in interactive code generation settings by evaluating proprietary and open-weight models on their performance across three key steps: (a) detecting underspecificity, (b) asking targeted clarification questions, and (c) leveraging the interaction to improve performance in underspecified scenarios. We introduce Ambig-SWE, an underspecified variant of SWE-Bench Verified, specifically designed to evaluate agent behavior under ambiguity and interaction. Our findings reveal that models struggle to distinguish between well-specified and underspecified instructions. However, when models interact for underspecified inputs, they effectively obtain vital information from the user leading to significant improvements in performance, up to 74% over the non-interactive settings, underscoring the value of effective interaction. Our study highlights critical gaps in how current state-of-the-art models handle missing information in complex software engineering tasks and structures the evaluation into distinct steps to enable targeted improvements.

We introduce a novel machine learning model for credit risk by combining tree-boosting with a latent spatio-temporal Gaussian process model accounting for frailty correlation. This allows for modeling non-linearities and interactions among predictor variables in a flexible data-driven manner and for accounting for spatio-temporal variation that is not explained by observable predictor variables. We also show how estimation and prediction can be done in a computationally efficient manner. In an application to a large U.S. mortgage credit risk data set, we find that both predictive default probabilities for individual loans and predictive loan portfolio loss distributions obtained with our novel approach are more accurate compared to conventional independent linear hazard models and also linear spatio-temporal models. Using interpretability tools for machine learning models, we find that the likely reasons for this outperformance are strong interaction and non-linear effects in the predictor variables and the presence of large spatio-temporal frailty effects.

Large language models (LLMs) often need to balance their internal parametric knowledge with external information, such as user beliefs and content from retrieved documents, in real-world scenarios like RAG or chat-based systems. A model's ability to reliably process these sources is key to system safety. Previous studies on knowledge conflict and sycophancy are limited to a binary conflict paradigm, primarily exploring conflicts between parametric knowledge and either a document or a user, but ignoring the interactive environment where all three sources exist simultaneously. To fill this gap, we propose a three-source interaction framework and systematically evaluate 27 LLMs from 3 families on 2 datasets. Our findings reveal general patterns: most models rely more on document assertions than user assertions, and this preference is reinforced by post-training. Furthermore, our behavioral analysis shows that most models are impressionable, unable to effectively discriminate between helpful and harmful external information. To address this, we demonstrate that fine-tuning on diverse source interaction data can significantly increase a model's discrimination abilities. In short, our work paves the way for developing trustworthy LLMs that can effectively and reliably integrate multiple sources of information. Code is available at https://github.com/shuowl/llm-source-balancing.

AI virtual cells aim to predict cellular responses to specified interventions, yet held-out predictive performance alone does not establish use of the supplied perturbation information. This prediction-claim gap matters in agentic model discovery, where language-model agents generate and revise predictors using score-based feedback. We introduce CELLAUDIT, which audits input-use claims by asking whether an input can enter the cited computation, whether fitted predictions depend on it, and whether that dependence improves prediction of observed response. On a paired morphology-transcriptomics perturbation benchmark (BBBC047), an agent-selected predictor attains a mean held-out Global Pearson correlation coefficient (PCC) of 0.3153 but remains invariant to compound replacement; a control-profile-only predictor reaches 0.3142. Source inspection identifies a compound-query pathway blocked by singleton key-value attention, and the invariance persists after refitting with disjoint control wells. In a stratified audit of 48 candidates across two linked tasks, 47 change predictions under compound replacement on both held-out folds, but only 20 show target-loss gains with intervals above zero on both folds. On BBBC047, falsification-guided revisions recover positive mean compound contributions while retaining gains over the control-profile-only baseline. In matched sci-Plex searches, audit-enriched feedback yields higher held-out performance and larger mean compound and dose contributions across five trajectories, although paired intervals span zero. Refitting fixed designs on an independently acquired cohort shows predictive generalization need not imply generalization of input-use claims: dose contribution persists, whereas support for compound identity does not. CELLAUDIT adds a falsification layer to agentic model discovery, moving from generate-score-revise toward discover-falsify-revise.

Protein-ligand modeling underpins computational drug discovery and molecular design. Existing protein-ligand benchmarks typically evaluate whether a protein and ligand interact and how strongly they bind, through tasks such as binary binding prediction and affinity regression. However, these evaluations provide limited evidence of whether models can localize binding sites or identify the non-covalent interactions underlying molecular recognition. To address this gap, we introduce InteractBind, a large-scale protein-ligand dataset comprising approximately 100k protein-ligand pairs, together with a benchmark for fine-grained evaluation. The core fine-grained task is that of binding-site localization, which uses protein-residue and ligand-atom interaction maps spanning six major types of non-covalent interactions to assess whether model-derived interaction maps localize binding sites. InteractBind further includes binding affinity and protein similarity-controlled splits to support realistic generalization assessment. Using InteractBind, we evaluate eight existing sequence-based and interaction-aware models, assessing binary binding prediction and binding-site localization. Results reveal limited binding-site localization despite strong binary binding prediction, with marked variation across non-covalent interaction types. Overall, InteractBind establishes a benchmark paradigm that encourages the development of more interpretable and physically grounded protein-ligand models.

Personalized conversational shopping requires maintaining preference consistency over multi-turn interactions, where users reveal constraints gradually. Existing approaches often rely on static profiles and do not explicitly control long-horizon interaction behavior. We propose a multi-agent, multimodal Retrieval-Augmented Generation (RAG) framework that decomposes dialogue state tracking, recommendation retrieval, preference-aware reasoning, and response generation, while integrating product metadata, product reviews, image-derived descriptions, and user historical reviews. To evaluate interaction-level quality, we adopt a trajectory-level protocol with four dimensions: Global Preference Consistency, Cumulative Information Synthesis, Interaction Trajectory, and Tone Consistency. On an Amazon Reviews 2023 benchmark, retrieval-enabled variants outperform a no-RAG baseline on automatic trajectory metrics (average 4.82 vs. 3.74). In a small real-user study (n{=}5), the Full variant achieves the highest mean overall rating (4.60 vs. 2.20 for Baseline), providing exploratory evidence that role decomposition plus user-centric retrieval improves perceived personalization.\footnote{Code and dataset are available at: https://github.com/RenaGao/Multimodel_RAG_Indexing

Deep residual architectures, such as ResNet and the Transformer, have enabled models of unprecedented depth, yet a formal understanding of why depth is so effective remains an open question. A popular intuition, following Veit et al. (2016), is that these residual networks behave like ensembles of many shallower models. Our key finding is an explicit analytical formula that verifies this ensemble perspective, proving that increasing network depth is mathematically equivalent to expanding the size of this implicit ensemble. Furthermore, our expansion reveals a hierarchical ensemble structure in which the combinatorial growth of computation paths leads to an explosion in the output signal, explaining the historical necessity of normalization layers in training deep models. This insight offers a first principles explanation for the historical dependence on normalization layers and sheds new light on a family of successful normalization-free techniques like SkipInit and Fixup. However, while these previous approaches infer scaling factors through optimizer analysis or a heuristic analogy to Batch Normalization, our work offers the first explanation derived directly from the network's inherent functional structure. Specifically, our Residual Expansion Theorem reveals that scaling each residual module provides a principled solution to taming the combinatorial explosion inherent to these architectures. We further show that this scaling acts as a capacity controls that also implicitly regularizes the model's complexity.

Hampering the interpretation of benchmark scores, evaluation data contamination has become a growing concern in the evaluation of LLMs, and an active area of research studies its effects. While evaluation data contamination is easily understood intuitively, it is surprisingly difficult to define precisely which samples should be considered contaminated and, consequently, how it impacts benchmark scores. We propose that these questions should be addressed together and that contamination metrics can be assessed based on whether models benefit from the examples they mark contaminated. We propose a novel analysis method called ConTAM, and show with a large scale survey of existing and novel n-gram based contamination metrics across 13 benchmarks and 7 models from 2 different families that ConTAM can be used to better understand evaluation data contamination and its effects. We find that contamination may have a much larger effect than reported in recent LLM releases and benefits models differently at different scales. We also find that considering only the longest contaminated substring provides a better signal than considering a union of all contaminated substrings, and that doing model and benchmark specific threshold analysis greatly increases the specificity of the results. Lastly, we investigate the impact of hyperparameter choices, finding that, among other things, both using larger values of n and disregarding matches that are infrequent in the pre-training data lead to many false negatives. With ConTAM, we provide a method to empirically ground evaluation data contamination metrics in downstream effects. With our exploration, we shed light on how evaluation data contamination can impact LLMs and provide insight into the considerations important when doing contamination analysis. We end our paper by discussing these in more detail and providing concrete suggestions for future work.

Prompt optimization in compound AI systems is statistically indistinguishable from a coin flip: across 72 optimization runs on Claude Haiku 4.5 (6 methods times 4 tasks times 3 repeats), 49% score below zero-shot; on Amazon Nova Lite, the failure rate is even higher. Yet on one task, all six methods improve over zero-shot by up to +6.8 points. What distinguishes success from failure? We investigate with 18,000 grid evaluations and 144 optimization runs, testing two assumptions behind end-to-end optimization tools like TextGrad and DSPy, in the order they must be answered: (A) agent prompts interact, requiring joint rather than independent optimization, and (B) individual prompts are worth optimizing at all. Interaction effects are never significant (p > 0.52, all F < 1.0), and optimization helps only when the task has exploitable output structure: a format the model can produce but does not default to. We further give a mechanistic account: instruction-tuning compresses input phrasing into a narrow output distribution, eliminating the very phrasing-sensitivity that joint optimization assumes. We provide a two-stage diagnostic: an \$80 ANOVA pre-test for agent coupling, and a 10-minute headroom test that predicts whether optimization is worthwhile, turning a coin flip into an informed decision.

A model under pushback can correct itself, capitulate, or hold, and one flip rate counts a correction and a capitulation alike. Using SycoLens, a modular replay protocol, we test how user pressure and evaluation settings shape measured flip rates. Each measurement is one stateless replay of an item, a committed answer, and one scripted user line in a fixed form. Every effect is read against a matched control with the line deleted. Pushback wording, committed text, answer format, boundary distance, and ground truth become factors of one instrument; earlier instruments vary one to three of them. Across eleven frontier models from three providers and about 760,000 controlled replays, which models look sycophantic depends on how the user pushes back. Lines that assert the opposite verdict and lines that challenge the answer without asserting one rank the models almost unrelatedly. Flip effects grow several-fold near a model's boundary, yet items answered identically in every screening draw still carry about half of the most-affected totals. On arithmetic tasks where the truth is known, one model re-derives and corrects itself under pressure while another abandons correct answers without written work. On the model tested, a planted derivation lowers release of the answer it argues for, true or wrong, where a bare stated value does not; the wrong answer is corrected much more often than the true one is abandoned. Under a yes/no readout the rankings come closer, entangled with a pressure-induced shift toward "no". One score per model therefore compares different behaviours across models and benchmarks. We condense these dependencies into a reporting profile; the instrument, records, and analyses will be released upon publication.

Human biases impact the way people analyze data and make decisions. Recent work has shown that some visualization designs can better support cognitive processes and mitigate cognitive biases (i.e., errors that occur due to the use of mental "shortcuts"). In this work, we explore how visualizing a user's interaction history (i.e., which data points and attributes a user has interacted with) can be used to mitigate potential biases that drive decision making by promoting conscious reflection of one's analysis process. Given an interactive scatterplot-based visualization tool, we showed interaction history in real-time while exploring data (by coloring points in the scatterplot that the user has interacted with), and in a summative format after a decision has been made (by comparing the distribution of user interactions to the underlying distribution of the data). We conducted a series of in-lab experiments and a crowd-sourced experiment to evaluate the effectiveness of interaction history interventions toward mitigating bias. We contextualized this work in a political scenario in which participants were instructed to choose a committee of 10 fictitious politicians to review a recent bill passed in the U.S. state of Georgia banning abortion after 6 weeks, where things like gender bias or political party bias may drive one's analysis process. We demonstrate the generalizability of this approach by evaluating a second decision making scenario related to movies. Our results are inconclusive for the effectiveness of interaction history (henceforth referred to as interaction traces) toward mitigating biased decision making. However, we find some mixed support that interaction traces, particularly in a summative format, can increase awareness of potential unconscious biases.

LLM agent systems are built by stacking scaffolding components (planning, tools, memory, self-reflection, retrieval) assuming more is better. We study cross-component interference (CCI): degradation when components interact destructively. We run a full factorial experiment over all 2^5=32 subsets of five components on HotpotQA and GSM8K with Llama-3.1-8B/70B (96 conditions, up to 10 seeds). The All-In system is consistently suboptimal: on HotpotQA, a single-tool agent surpasses All-In by 32% (F1 0.233 vs 0.177, p=0.023); on GSM8K, a 3-component subset beats All-In by 79% (0.43 vs 0.24, p=0.010). Optimal component count is task-dependent (k*=1-4) and scale-sensitive: at 70B, combinations that hurt at 8B provide gains, though All-In still trails the best subset. We fit a main-effects regression (R^2=0.916, adj-R^2=0.899, LOOCV=0.872), compute exact Shapley values, and find 183/325 submodularity violations (56.3%), showing greedy selection is unreliable. A three-body synergy among Tool Use, Self-Reflection, and Retrieval (INT_3=+0.175, 95% CI [+0.003,+0.351]) is reported as exploratory. CCI replicates across model families (Qwen2.5) and is robust to prompt paraphrasing. Our findings suggest maximally-equipped agent defaults should be replaced by task-specific subset selection via interaction-aware analysis.

Fairness and relevance are two important aspects of recommender systems (RSs). Typically, they are evaluated either (i) separately by individual measures of fairness and relevance, or (ii) jointly using a single measure that accounts for fairness with respect to relevance. However, approach (i) often does not provide a reliable joint estimate of the goodness of the models, as it has two different best models: one for fairness and another for relevance. Approach (ii) is also problematic because these measures tend to be ad-hoc and do not relate well to traditional relevance measures, like NDCG. Motivated by this, we present a new approach for jointly evaluating fairness and relevance in RSs: Distance to Pareto Frontier (DPFR). Given some user-item interaction data, we compute their Pareto frontier for a pair of existing relevance and fairness measures, and then use the distance from the frontier as a measure of the jointly achievable fairness and relevance. Our approach is modular and intuitive as it can be computed with existing measures. Experiments with 4 RS models, 3 re-ranking strategies, and 6 datasets show that existing metrics have inconsistent associations with our Pareto-optimal solution, making DPFR a more robust and theoretically well-founded joint measure for assessing fairness and relevance. Our code: https://github.com/theresiavr/DPFR-recsys-evaluation

Limited Memory Language Models (LMLMs) externalize factual knowledge to a database to enable deletion-based unlearning without retraining. Existing evaluations measure post-deletion correctness in aggregate and cannot tell whether a deleted fact persists through residual parametric memory, alternative retrieval paths, or near-neighbor retrieval artifacts. We propose a causal auditing framework that holds the model fixed and varies the database state at inference time across three interventions: FULL, DEL-ON, and DEL-OFF. The framework decomposes post-deletion behavior into parametric leakage L(f), retrieval-mediated correctness R(f), and a retrieval artifact rate grounded in the inference-time retrieval trace. We apply it to 12,228 alias-closure deletions across thirteen databases, including four adversarial topologies (Base, Alias, Noise, Collision) we construct in three domains, and six prompt formulations. Parametric leakage is near zero in every variant and every prompt style: the model rarely returns the deleted answer in the absence of retrieval. The residual that does survive lives in the retrieval graph: retrieval-mediated correctness and the retrieval artifact rate match within rounding everywhere, so post-deletion correctness is, in our audit, predominantly reconstituted from near-neighbor retrieval. This residual ranges from 0.7% on the released LMLM database to 13.6% on the most adversarial variant, and prompt formulation does not independently control how much of a deleted fact survives. These results suggest that, for this class of LMLM and deletion procedure, the unlearning boundary is drawn primarily by the database administrator rather than by the model.

Residual connections are pivotal for deep neural networks, enabling greater depth by mitigating vanishing gradients. However, in standard residual updates, the module's output is directly added to the input stream. This can lead to updates that predominantly reinforce or modulate the existing stream direction, potentially underutilizing the module's capacity for learning entirely novel features. In this work, we introduce Orthogonal Residual Update: we decompose the module's output relative to the input stream and add only the component orthogonal to this stream. This design aims to guide modules to contribute primarily new representational directions, fostering richer feature learning while promoting more efficient training. We demonstrate that our orthogonal update strategy improves generalization accuracy and training stability across diverse architectures (ResNetV2, Vision Transformers) and datasets (CIFARs, TinyImageNet, ImageNet-1k), achieving, for instance, a +4.3\%p top-1 accuracy gain for ViT-B on ImageNet-1k.

Personalized treatment effect estimates are often of interest in high-stakes applications -- thus, before deploying a model estimating such effects in practice, one needs to be sure that the best candidate from the ever-growing machine learning toolbox for this task was chosen. Unfortunately, due to the absence of counterfactual information in practice, it is usually not possible to rely on standard validation metrics for doing so, leading to a well-known model selection dilemma in the treatment effect estimation literature. While some solutions have recently been investigated, systematic understanding of the strengths and weaknesses of different model selection criteria is still lacking. In this paper, instead of attempting to declare a global `winner', we therefore empirically investigate success- and failure modes of different selection criteria. We highlight that there is a complex interplay between selection strategies, candidate estimators and the data used for comparing them, and provide interesting insights into the relative (dis)advantages of different criteria alongside desiderata for the design of further illuminating empirical studies in this context.

Political scientists are rapidly adopting large language models (LLMs) for text annotation, yet the sensitivity of annotation results to implementation choices remains poorly understood. Most evaluations test a single model or configuration; how model choice, model size, learning approach, and prompt style interact, and whether popular "best practices" survive controlled comparison, are largely unexplored. We present a controlled evaluation of these pipeline choices, testing six open-weight models across four political science annotation tasks under identical quantisation, hardware, and prompt-template conditions. Our central finding is methodological: interaction effects dominate main effects, so seemingly reasonable pipeline choices can become consequential researcher degrees of freedom. No single model, prompt style, or learning approach is uniformly superior, and the best-performing model varies across tasks. Two corollaries follow. First, model size is an unreliable guide both to cost and to performance: cross-family efficiency differences are so large that some larger models are less resource-intensive than much smaller alternatives, while within model families mid-range variants often match or exceed larger counterparts. Second, widely recommended prompt engineering techniques yield inconsistent and sometimes negative effects on annotation performance. We use these benchmark results to develop a validation-first framework - with a principled ordering of pipeline decisions, guidance on prompt freezing and held-out evaluation, reporting standards, and open-source tools - to help researchers navigate this decision space transparently.

Attention Residuals (AttnRes) replace the fixed residual sum with depth-wise attention over previous sub-layer outputs in Large Language Models (LLMs), but use each output as both a full-dimensional key and value. This couples routing with representation and makes the cost of computing depth-routing scores scale with hidden width d. We propose Low-Rank Attention Residuals (LR-AttnRes), which keep full-dimensional residual values while using r-dimensional keys, with r < d, for routing. LR-AttnRes uses the last r dimensions of each value as the routing key, reducing total residual-side FLOPs while still improving performance. Comprehensive sweeps across the number of blocks (N) and r show that depth-wise routing can be effective with far fewer dimensions than the model width. At both 1B and 4B parameters with r = d/4, LR-AttnRes achieves lower final validation loss, higher average downstream accuracy, and higher measured training-step throughput than standard AttnRes. We also provide a fused kernel supporting standard and low-rank routing. We release all code, the kernel, and all trained models to facilitate future research.

This first release of Prior Labs in relational learning shows our continued commitment to open science. We open-source three pieces of software that we expect to accelerate research in the field towards meaningful real-world impact. We aim to steer further development based on feedback from, and in collaboration with, the community. Given the early stage of development, our α-release targets researchers and early-adopting practitioners. Over the past years, a variety of datasets and tasks for relational learning have emerged, but the community has not converged on a reliable, reproducible way to compare different methods on these tasks. Our α-release, RelArena-α, provides a unified framework for running and comparing baselines on RelBench v1 by standardizing data loading, evaluation protocols, tuning regimes, and support for systems with custom tuning, inspired by established tabular benchmarks such as TabArena. We plan to work with the research community to further develop RelArena-α into a catalyst for progress in the relational learning community. We release the initial version of TabPFN-Rel, a purpose-built relational harness for TabPFN-3. Currently ranked first among models on RelArena-α, TabPFN-Rel makes key improvements upon RDBLearn. Beyond its ranking, TabPFN-Rel serves as a strong baseline, adding to the growing evidence that flattening a relational database into a single table remains competitive with specialized relational architectures on real-world tasks. To facilitate adoption of relational learning methods in research and industry, we release an initial α-version of our Relational Predictive Interface, RPI, an open-source, model-agnostic interface that enables early adopters to easily define problems on new databases and apply any model implemented in RelArena-α, including TabPFN-Rel, to these problems.

Motivation: Ab initio protein docking represents a major challenge for optimizing a noisy and costly "black box"-like function in a high-dimensional space. Despite progress in this field, there is no docking method available for rigorous uncertainty quantification (UQ) of its solution quality (e.g. interface RMSD or iRMSD). Results: We introduce a novel algorithm, Bayesian Active Learning (BAL), for optimization and UQ of such black-box functions and flexible protein docking. BAL directly models the posterior distribution of the global optimum (or native structures for protein docking) with active sampling and posterior estimation iteratively feeding each other. Furthermore, we use complex normal modes to represent a homogeneous Euclidean conformation space suitable for high-dimension optimization and construct funnel-like energy models for encounter complexes. Over a protein docking benchmark set and a CAPRI set including homology docking, we establish that BAL significantly improve against both starting points by rigid docking and refinements by particle swarm optimization, providing for one third targets a top-3 near-native prediction. BAL also generates tight confidence intervals with half range around 25% of iRMSD and confidence level at 85%. Its estimated probability of a prediction being native or not achieves binary classification AUROC at 0.93 and AUPRC over 0.60 (compared to 0.14 by chance); and also found to help ranking predictions. To the best of our knowledge, this study represents the first uncertainty quantification solution for protein docking, with theoretical rigor and comprehensive assessment. Source codes are available at https://github.com/Shen-Lab/BAL.

Reality may establish that an outcome occurred without identifying which evolving procedure produced it or why. This distinction matters in production ML systems whose code, configuration, and artifacts change while external feedback accumulates. We examine it in a human-directed, agent-engineered quantitative trading system, using oracle to mean an external source of realized outcomes rather than a complete correctness specification. Across one year, the account gained and outperformed a broad market index, while annual alpha was not statistically distinguishable from zero under the main retrospective specification. Retrospectively selected subperiods include adverse relative performance and conditional candidate-level weakness under declared approximate references. Engineering records document changes during the episode, and complete recommendation-to-runtime binding is unavailable. The archive does not establish a common frozen instance or a unique cause. The case motivates an outcome--diagnosis gap: outcome evidence, evaluated-object identity, and causal explanation support distinct claims. We distinguish frozen instances, pre-specified adaptive procedures, and ad-hoc development; organize archive-relative claim identifiability and an evidence hierarchy; and propose a prospective production-binding protocol. An illustrative compatible-history example shows how factual binding can resolve a recommendation's referent without supplying its counterfactual effect. The protocol is proposed rather than prospectively validated. External feedback constrains outcome claims, while provenance and additional identification structure determine the resolution of diagnosis.

While Attention Residuals has shown some effectiveness in addressing the widespread issue of unbounded activation growth across deep residual layers, it inevitably incurs significant communication overhead. To circumvent this bottleneck, we propose Multi-Gate Residuals (MGR), which stabilizes activation scales without additional communication burden. It utilizes a straightforward scoring and gating mechanism to maintain multi-stream context, coupled with Attention Pooling to extract hidden states from the stream states. Empirical experiments demonstrate that MGR is practical for large-scale training and deployment, offering tangible performance improvements over existing architectures.

Modern language models are likely to be updated throughout their lifetime rather than trained once and frozen. Each update therefore participates in a recurring cycle: decide which experience to learn from, understand what that update changes, and remain capable of learning from what comes next. We show that these challenges are governed by the same evolving update--behavior interaction. We derive a token- and layer-wise decomposition of how learning from one token changes another prediction. By separating the softmax force, shared readout geometry, and residual connections, it exposes two interaction channels and yields a forward-computable approximation. Following this interaction through time reveals a unified picture of continual adaptation. Positive interaction identifies useful experience; negative interaction produces either concentrated collision or accumulated erosion; over longer horizons, updates reshape the shared geometry mediating future learning signals, reducing their transmission. These predictions lead to effective data selection, mechanism-specific controls for interference, and a readout-based diagnostic of future learnability whose degradation predicts the benefit of restoring the readout. Across models and training regimes, the same local interaction thus explains both what an update changes now and how learning today changes what can be learned tomorrow. This view connects data attribution, forgetting, and plasticity loss as distinct regimes of the same evolving learning dynamics.

Considerable effort has been dedicated to mitigating toxicity, but existing methods often require drastic modifications to model parameters or the use of computationally intensive auxiliary models. Furthermore, previous approaches have often neglected the crucial factor of language's evolving nature over time. In this work, we present a comprehensive perspective on toxicity mitigation that takes into account its changing nature. We introduce Goodtriever, a flexible methodology that matches the current state-of-the-art toxicity mitigation while achieving 43% relative latency reduction during inference and being more computationally efficient. By incorporating a retrieval-based approach at decoding time, Goodtriever enables toxicity-controlled text generation. Our research advocates for an increased focus on adaptable mitigation techniques, which better reflect the data drift models face when deployed in the wild. Code and data are available at https://github.com/for-ai/goodtriever.

Users of music streaming, video streaming, news recommendation, and e-commerce services often engage with content in a sequential manner. Providing and evaluating good sequences of recommendations is therefore a central problem for these services. Prior reweighting-based counterfactual evaluation methods either suffer from high variance or make strong independence assumptions about rewards. We propose a new counterfactual estimator that allows for sequential interactions in the rewards with lower variance in an asymptotically unbiased manner. Our method uses graphical assumptions about the causal relationships of the slate to reweight the rewards in the logging policy in a way that approximates the expected sum of rewards under the target policy. Extensive experiments in simulation and on a live recommender system show that our approach outperforms existing methods in terms of bias and data efficiency for the sequential track recommendations problem.

Large Language Models (LLMs) are increasingly used for zero-shot annotation and LLM-as-a-judge tasks, yet their reliability hinges on how model-internalized priors interact with user-provided instructions. We investigate three dimensions of this interaction: (1) how an LLM's familiarity with data and task definitions affects performance, (2) the extent to which additional information in prompts can correct zero-shot errors ("decision stickiness"), and (3) model susceptibility to misaligned task definitions. Through experiments on toxicity detection across diverse datasets (spanning social media, gaming, news, and forums) using both dense and mixture-of-experts models, we find that nearly two-thirds of zero-shot errors are resistant to correction, with an overall rescue rate (fraction of initial errors corrected by prompting) of only 34.8%. High-confidence errors prove especially resistant to correction. When given misaligned definitions, LLMs follow them while maintaining confidence levels unchanged from the aligned condition. Crucially, we introduce Definition-Specific Familiarity (DSF), which measures alignment between a model's internal concept and the task definition. After controlling for dataset-level confounds, DSF shows a positive association with model performance (partial r = +0.41), while three distinct memorization metrics (ROUGE-L, BERTScore, and embedding cosine similarity) all fail to show a positive association. These findings show the limitations of prompt-based correction in annotation tasks, highlighting the importance of definition alignment over text-level memorization.

One of the core pillars of efficient deep learning methods is architectural improvements such as the residual/skip connection, which has led to significantly better model convergence and quality. Since then the residual connection has become ubiquitous in not just convolutional neural networks but also transformer-based architectures, the backbone of LLMs. In this paper we introduce Learned Augmented Residual Layer (LAuReL) -- a novel generalization of the canonical residual connection -- with the goal to be an in-situ replacement of the latter while outperforming on both model quality and footprint metrics. Our experiments show that using \laurel can help boost performance for both vision and language models. For example, on the ResNet-50, ImageNet 1K task, it achieves 60% of the gains from adding an extra layer, while only adding 0.003% more parameters, and matches it while adding 2.6times fewer parameters.

Language is an intricately structured system, and a key goal of NLP interpretability is to provide methodological insights for understanding how language models represent this structure internally. In this paper, we use Shapley Taylor interaction indices (STII) in order to examine how language and speech models internally relate and structure their inputs. Pairwise Shapley interactions measure how much two inputs work together to influence model outputs beyond if we linearly added their independent influences, providing a view into how models encode structural interactions between inputs. We relate the interaction patterns in models to three underlying linguistic structures: syntactic structure, non-compositional semantics, and phonetic coarticulation. We find that autoregressive text models encode interactions that correlate with the syntactic proximity of inputs, and that both autoregressive and masked models encode nonlinear interactions in idiomatic phrases with non-compositional semantics. Our speech results show that inputs are more entangled for pairs where a neighboring consonant is likely to influence a vowel or approximant, showing that models encode the phonetic interaction needed for extracting discrete phonemic representations.

Modeling and generating human reactions poses a significant challenge with broad applications for computer vision and human-computer interaction. Existing methods either treat multiple individuals as a single entity, directly generating interactions, or rely solely on one person's motion to generate the other's reaction, failing to integrate the rich semantic information that underpins human interactions. Yet, these methods often fall short in adaptive responsiveness, i.e., the ability to accurately respond to diverse and dynamic interaction scenarios. Recognizing this gap, our work introduces an approach tailored to address the limitations of existing models by focusing on text-driven human reaction generation. Our model specifically generates realistic motion sequences for individuals that responding to the other's actions based on a descriptive text of the interaction scenario. The goal is to produce motion sequences that not only complement the opponent's movements but also semantically fit the described interactions. To achieve this, we present MoReact, a diffusion-based method designed to disentangle the generation of global trajectories and local motions sequentially. This approach stems from the observation that generating global trajectories first is crucial for guiding local motion, ensuring better alignment with given action and text. Furthermore, we introduce a novel interaction loss to enhance the realism of generated close interactions. Our experiments, utilizing data adapted from a two-person motion dataset, demonstrate the efficacy of our approach for this novel task, which is capable of producing realistic, diverse, and controllable reactions that not only closely match the movements of the counterpart but also adhere to the textual guidance. Please find our webpage at https://xiyan-xu.github.io/MoReactWebPage.

Residual connections with PreNorm are standard in modern LLMs, yet they accumulate all layer outputs with fixed unit weights. This uniform aggregation causes uncontrolled hidden-state growth with depth, progressively diluting each layer's contribution. We propose Attention Residuals (AttnRes), which replaces this fixed accumulation with softmax attention over preceding layer outputs, allowing each layer to selectively aggregate earlier representations with learned, input-dependent weights. To address the memory and communication overhead of attending over all preceding layer outputs for large-scale model training, we introduce Block AttnRes, which partitions layers into blocks and attends over block-level representations, reducing the memory footprint while preserving most of the gains of full AttnRes. Combined with cache-based pipeline communication and a two-phase computation strategy, Block AttnRes becomes a practical drop-in replacement for standard residual connections with minimal overhead. Scaling law experiments confirm that the improvement is consistent across model sizes, and ablations validate the benefit of content-dependent depth-wise selection. We further integrate AttnRes into the Kimi Linear architecture (48B total / 3B activated parameters) and pre-train on 1.4T tokens, where AttnRes mitigates PreNorm dilution, yielding more uniform output magnitudes and gradient distribution across depth, and improves downstream performance across all evaluated tasks.

Late-interaction retrieval models that use the MaxSim similarity function have shown strong empirical performance, often outperforming single-vector dense and sparse retrieval models. Despite these empirical findings, little is known about the theoretical representation power of MaxSim and how it compares to other retrieval approaches. This paper shows by construction that MaxSim similarity can exactly replicate the inner product between any two non-negative k-sparse vectors with possibly infinite dimension, requiring only O(k) representation space. Moreover, there exist similarities that MaxSim can express while standard vector inner products with the same representation space cannot. Leveraging our theoretical framework, we introduce Signed MaxSim which allows late-interaction models to exactly replicate any real-valued inner product, something we prove standard MaxSim is not capable of. We also show that MaxSim can act as an aggregation of soft-OR operations and as an evaluator of logical expressions in positive Conjunctive Normal Form. Our findings show that MaxSim is at least as capable as standard vector inner products for any non-negative vectors and our extension, Signed MaxSim, is as capable for any vectors. Both similarities possess additional capabilities that inner product cannot replicate, marking one of the first theoretical justifications and quantifications of late-interaction methods. Our theoretical findings are supported empirically: on a retrieval task featuring queries with negations, Signed MaxSim improves out-of-domain performance significantly over a standard ColBERT/MaxSim baseline with nDCG@10 increasing from 0.597 to 1.000 under a vocabulary shift and from 0.008 to 0.788 on negation-only queries.

While implicit feedback is foundational to modern recommender systems, factors such as human error, uncertainty, and ambiguity in user behavior inevitably introduce significant noise into this feedback, adversely affecting the accuracy and robustness of recommendations. To address this issue, existing methods typically aim to reduce the training weight of noisy feedback or discard it entirely, based on the observation that noisy interactions often exhibit higher losses in the overall loss distribution. However, we identify two key issues: (1) there is a significant overlap between normal and noisy interactions in the overall loss distribution, and (2) this overlap becomes even more pronounced when transitioning from pointwise loss functions (e.g., BCE loss) to pairwise loss functions (e.g., BPR loss). This overlap leads traditional methods to misclassify noisy interactions as normal, and vice versa. To tackle these challenges, we further investigate the loss overlap and find that for a given user, there is a clear distinction between normal and noisy interactions in the user's personal loss distribution. Based on this insight, we propose a resampling strategy to Denoise using the user's Personal Loss distribution, named PLD, which reduces the probability of noisy interactions being optimized. Specifically, during each optimization iteration, we create a candidate item pool for each user and resample the items from this pool based on the user's personal loss distribution, prioritizing normal interactions. Additionally, we conduct a theoretical analysis to validate PLD's effectiveness and suggest ways to further enhance its performance. Extensive experiments conducted on three datasets with varying noise ratios demonstrate PLD's efficacy and robustness.

Cold-start drug-drug interaction (DDI) prediction tests whether models can identify clinically significant interactions for drugs without training-time interaction history. Existing benchmarks mostly report aggregate edge-prediction scores, leaving a key evaluation question unanswered: when models receive molecular, textual, or knowledge-graph (KG) evidence, do they actually use the evidence that pharmacologically supports the interaction? We introduce ColdDDI, a reconstructible diagnostic benchmark built from DrugBank 5.1.13, with 1,900 approved small-molecule drugs and 565,731 positive DDI pairs. ColdDDI evaluates pairs with zero, one, or two unseen drugs. It also annotates each interaction by whether it changes drug exposure or drug effect, and by whether the biomedical knowledge graph contains shared enzymes, transporters, or targets that can plausibly mediate the interaction. These annotations separate evidence availability from predictive dependence. We evaluate eight conventional DDI methods and 13 LLMs; for open-weight LLMs, we test five prompt patterns and use masking, drug replacement, and channel-sensitivity metrics to probe knowledge utilization. ColdDDI exposes that, in the hardest split where both drugs are unseen, the main performance divide is mediator availability. A fine-tuned 1B LLM recovers 89-93% of interactions with a shared enzyme, transporter, or target, but only 40-62% without such a mediator. More importantly, KG-provided evidence is not always used; several KG-augmented baselines change little when the shared mediator is masked or disrupted, whereas fine-tuned LLMs respond strongly to this intervention. Thus, ColdDDI evaluates knowledge utilization rather than knowledge access alone, showing where cold-start DDI models rely on mechanistic evidence and where they fail despite receiving it. Code is available at https://github.com/0217ljh/ColdDDI-NeurIPS2026.

Recursive synthetic-data training can degrade a fitted model, but its effects on the variable-screening stage that precedes model fitting are less understood. When each generation labels data for the next, a marginal screener ranks variables against the current pseudo-label target rather than the original response. Across generations, this target drift can erode or reverse the active--inactive score margin and cause screening to discard variables that clean-label screening would retain. We call this process screening collapse. In a Gaussian linear model with minimum-norm recursive generators, we establish finite-sample screening bounds, characterize a late-generation information-loss limit, and derive a minimax impossibility result. Screening collapse can precede and compound ordinary model collapse: omitted variables incur a covariance-weighted loss that no refit restricted to the selected variables can eliminate, while recursive labels further degrade estimation on the retained variables. We also examine two approaches to mitigating screening collapse. Fixed-fraction real-label retention preserves a clean-label component but leaves resolution fixed, whereas data accumulation can avoid screening collapse if the pooled target preserves a positive margin and the growing sample resolves it. Numerical experiments on gene-expression data support the theoretical findings.

Low-rank approximation techniques have become the de facto standard for fine-tuning Large Language Models (LLMs) due to their reduced computational and memory requirements. This paper investigates the effectiveness of these methods in capturing the shift of fine-tuning datasets from the initial pre-trained data distribution. Our findings reveal that there are cases in which low-rank fine-tuning falls short in learning such shifts. This, in turn, produces non-negligible side effects, especially when fine-tuning is adopted for toxicity mitigation in pre-trained models, or in scenarios where it is important to provide fair models. Through comprehensive empirical evidence on several models, datasets, and tasks, we show that low-rank fine-tuning inadvertently preserves undesirable biases and toxic behaviors. We also show that this extends to sequential decision-making tasks, emphasizing the need for careful evaluation to promote responsible LLMs development.

In this paper, we present an efficient method for storing fine-tuned models by leveraging the low-rank properties of weight residuals. Our key observation is that weight residuals in large overparameterized models exhibit even stronger low-rank characteristics. Based on this insight, we propose Efficient Residual Encoding (ERE), a novel approach that achieves efficient storage of fine-tuned model weights by approximating the low-rank weight residuals. Furthermore, we analyze the robustness of weight residuals and push the limit of storage efficiency by utilizing additional quantization and layer-wise rank allocation. Our experimental results demonstrate that our method significantly reduces memory footprint while preserving performance in various tasks and modalities. We release our code.

Counterfactual prompting (i.e., perturbing a single factor and measuring output change) is widely used to evaluate things like LLM bias and CoT faithfulness. But in this work we argue that observed effects cannot be attributed to the targeted factor without accounting for baseline ``meaning-preserving'' modifications to text that establish general model sensitivity. This is because every counterfactual edit is a compound treatment that bundles the variable of interest with incidental surface-form variation; this violates treatment variation irrelevance. We observe prediction flip rates on MedQA of 14.9% when we surgically change patient gender. However, this is statistically indistinguishable from the flip rates induced by simply paraphrasing inputs (14.1%). In this case, it would therefore be unwarranted to conclude that the LLM is especially sensitive to patient gender. To account for this and robustly measure the effects of targeted interventions, we propose a framework in which we compare (via statistical testing) differences observed under target interventions to those induced by paraphrasing inputs. We then use this framework to revisit a analysis done on the MedPerturb dataset, which reported evidence of model sensitivity to patient demographics and stylistic cues. We find that these effects largely dissipate when we account for general model sensitivity, with only 5 of 120 tests reaching statistical significance. Applying the same framework to occupational biography classification, we detect clearly significant directional gender bias, showing that the framework identifies real directional effects even when they are small. We evaluate a range of metrics -- aggregate, per-sample distributional, and regression -- and find that per-sample metrics are dramatically more powerful than aggregate metrics and regression powerfully and uniquely characterizes effect direction and magnitude.

Drug-side effect research is vital for understanding adverse reactions arising in complex multi-drug therapies. However, the scarcity of higher-order datasets that capture the combinatorial effects of multiple drugs severely limits progress in this field. Existing resources such as TWOSIDES primarily focus on pairwise interactions. To fill this critical gap, we introduce HODDI, the first Higher-Order Drug-Drug Interaction Dataset, constructed from U.S. Food and Drug Administration (FDA) Adverse Event Reporting System (FAERS) records spanning the past decade, to advance computational pharmacovigilance. HODDI contains 109,744 records involving 2,506 unique drugs and 4,569 unique side effects, specifically curated to capture multi-drug interactions and their collective impact on adverse effects. Comprehensive statistical analyses demonstrate HODDI's extensive coverage and robust analytical metrics, making it a valuable resource for studying higher-order drug relationships. Evaluating HODDI with multiple models, we found that simple Multi-Layer Perceptron (MLP) can outperform graph models, while hypergraph models demonstrate superior performance in capturing complex multi-drug interactions, further validating HODDI's effectiveness. Our findings highlight the inherent value of higher-order information in drug-side effect prediction and position HODDI as a benchmark dataset for advancing research in pharmacovigilance, drug safety, and personalized medicine. The dataset and codes are available at https://github.com/TIML-Group/HODDI.

To date, toxicity mitigation in language models has almost entirely been focused on single-language settings. As language models embrace multilingual capabilities, it's crucial our safety measures keep pace. Recognizing this research gap, our approach expands the scope of conventional toxicity mitigation to address the complexities presented by multiple languages. In the absence of sufficient annotated datasets across languages, we employ translated data to evaluate and enhance our mitigation techniques. We also compare finetuning mitigation approaches against retrieval-augmented techniques under both static and continual toxicity mitigation scenarios. This allows us to examine the effects of translation quality and the cross-lingual transfer on toxicity mitigation. We also explore how model size and data quantity affect the success of these mitigation efforts. Covering nine languages, our study represents a broad array of linguistic families and levels of resource availability, ranging from high to mid-resource languages. Through comprehensive experiments, we provide insights into the complexities of multilingual toxicity mitigation, offering valuable insights and paving the way for future research in this increasingly important field. Code and data are available at https://github.com/for-ai/goodtriever.

Networks provide a powerful formalism for modeling complex systems by using a model of pairwise interactions. But much of the structure within these systems involves interactions that take place among more than two nodes at once; for example, communication within a group rather than person-to person, collaboration among a team rather than a pair of coauthors, or biological interaction between a set of molecules rather than just two. Such higher-order interactions are ubiquitous, but their empirical study has received limited attention, and little is known about possible organizational principles of such structures. Here we study the temporal evolution of 19 datasets with explicit accounting for higher-order interactions. We show that there is a rich variety of structure in our datasets but datasets from the same system types have consistent patterns of higher-order structure. Furthermore, we find that tie strength and edge density are competing positive indicators of higher-order organization, and these trends are consistent across interactions involving differing numbers of nodes. To systematically further the study of theories for such higher-order structures, we propose higher-order link prediction as a benchmark problem to assess models and algorithms that predict higher-order structure. We find a fundamental differences from traditional pairwise link prediction, with a greater role for local rather than long-range information in predicting the appearance of new interactions.

High-throughput screening techniques are commonly used to obtain large quantities of data in many fields of biology. It is well known that artifacts arising from variability in the technical execution of different experimental batches within such screens confound these observations and can lead to invalid biological conclusions. It is therefore necessary to account for these batch effects when analyzing outcomes. In this paper we describe RxRx1, a biological dataset designed specifically for the systematic study of batch effect correction methods. The dataset consists of 125,510 high-resolution fluorescence microscopy images of human cells under 1,138 genetic perturbations in 51 experimental batches across 4 cell types. Visual inspection of the images alone clearly demonstrates significant batch effects. We propose a classification task designed to evaluate the effectiveness of experimental batch correction methods on these images and examine the performance of a number of correction methods on this task. Our goal in releasing RxRx1 is to encourage the development of effective experimental batch correction methods that generalize well to unseen experimental batches. The dataset can be downloaded at https://rxrx.ai.

In-context learning (ICL) can induce emergent misalignment (EM), where narrow misaligned examples alter answers to unrelated questions. Existing prompts, however, conflate harmful-text exposure with an invitation to continue assistant behavior. We hold harmful answers fixed while varying their delivery as demonstrations, evidence, assistant history, or tool output. Across ten independently sampled contexts, demonstration framing raises broad EM by 30--32 percentage points on a susceptible Gemini model; the gap survives domain exclusion, semantic clustering, unseen questions, and four prompt templates. Format and length-matched controls show that harmful content is necessary but insufficient. A role times continuation factorial further reveals model-dependent provenance effects: Gemini follows both assistant and tool histories, whereas Grok largely resists tool-framed continuation. Several other frontier and open-weight models show no gap. Blinded human audits confirm every main contrast and show that the model judge underestimates active-condition failures. Thus continuation framing is a strong, model-dependent moderator of ICL-EM, not a universal consequence of harmful context.

Longitudinal observational data are often subject to informative missingness. For example, in healthcare research using electronic health records, covariates and outcomes are measured only when patients interact with the healthcare system. Whether these data are observed usually depends on the unobserved variable values themselves, introducing a common form of data missing not at random. We develop identification and estimation methods for the effects of longitudinal modified treatment policies under a self-censoring model which explicitly models this dependence. We consider effects of treatments that can be modified only at measurement times (e.g., interactions with the heathcare system). We study two settings: one in which the observed history suffices for treatment confounding control, and another in which confounder control requires covariate values that were not measured at missed visits. In both settings, we combine longitudinal causal identification with shadow-variable conditional moment restrictions to obtain recursive identification formulas for the counterfactual outcome mean. We derive gradients of the pathwise derivatives and second-order remainder expansions, and use these results to construct estimators that accommodate machine learning for nuisance-function estimation. Under suitable product-rate conditions and cross-fitting, the estimators are asymptotically linear and permit root-n inference, including simultaneous inference across outcome times. We also describe conditional-moment learning and ensemble approaches for estimating the nuisance functions required by our approach, together with a pool-and-smooth strategy that borrows information across sparsely measured outcomes.

Attention Residuals (AttnRes) enables content-dependent retrieval over network depth, which can be viewed as single-stream softmax attention along the depth axis. Inspired by the success of multi-head attention along the sequence axis, we introduce Multi-Stream Attention Residuals (MSAR), an extension of AttnRes that generalizes this mechanism to multi-head depth attention, yielding substantial performance gains with minimal additional overhead. MSAR draws stream diversity from sequence context through multi-scale causal convolutions, allowing different heads to retrieve historical representations through distinct contextual views while preserving the integrity of the hidden representation. The retrieved streams are combined through lightweight adaptive mixing to generate the single-stream layer input. By retaining single-stream sources and expanding them on demand, MSAR supports multi-stream computation without requiring persistent multi-stream storage or communication. Across all 12 downstream benchmarks at the 18B and 28B MoE scales, MSAR consistently outperforms prior residual variants, including standard residual connections, manifold-constrained Hyper-Connections (mHC), and AttnRes. Scaling-law experiments yield an iso-loss compute speedup of 1.58times over the standard residual baseline, compared with 1.35times for AttnRes and 1.30times for mHC. These results make MSAR a promising residual architecture for large-scale pre-training.

Protein-molecule virtual screening is increasingly cast as a problem of representation learning in a shared embedding space. Existing methods rely on dense holistic alignment, entangling invariant binding determinants with nuisance correlations and limiting transfer to new targets. It has been noted that binding in protein-molecule systems involves sparse cross-modality interactions: binding is governed by a small contact interface and a few decisive local interactions (e.g., hydrogen bonds, hydrophobic contacts, and salt bridges) rather than the global structures of the protein and molecule. We hypothesize that uncovering and leveraging sparse interaction patterns is critical for generalization beyond the training data, as these patterns are reusable and expected to improve performance across different scenarios. In this paper, we aim to identify and leverage sparse interaction patterns, and verify our hypothesis. Since the training data contain only observed binding pairs, we formalize this prior via a V-structure causal model under Heckman-style selection, and establish three theoretical results: (i) the latent concepts of interacting proteins and molecules are not identifiable without appropriate sparsity constraints; (ii) these concepts and their sparse interactions are component-wise identifiable under structural sparsity conditions; and (iii) a low-rank relaxation of these conditions yields subspace identifiability of the concepts and interactions. Inspired by these principles, we propose CausalBind with three implementation variants. Extensive experiments on DUD-E and LIT-PCBA benchmarks show that all variants consistently outperform strong retrieval baselines, with the largest gains on LIT-PCBA early enrichment, and further generalize to target- and scaffold-level out-of-distribution splits. Code is available at https://github.com/lokali/CausalBind.

Deep residual networks have emerged as a family of extremely deep architectures showing compelling accuracy and nice convergence behaviors. In this paper, we analyze the propagation formulations behind the residual building blocks, which suggest that the forward and backward signals can be directly propagated from one block to any other block, when using identity mappings as the skip connections and after-addition activation. A series of ablation experiments support the importance of these identity mappings. This motivates us to propose a new residual unit, which makes training easier and improves generalization. We report improved results using a 1001-layer ResNet on CIFAR-10 (4.62% error) and CIFAR-100, and a 200-layer ResNet on ImageNet. Code is available at: https://github.com/KaimingHe/resnet-1k-layers

The R-Learner is a powerful, theoretically-grounded framework for estimating heterogeneous treatment effects, prized for its robustness to nuisance model errors. However, its application to network data, where causal heterogeneity is often graph-dependent, presents a critical challenge to its core assumption of a well-specified final-stage model. In this paper, we conduct a large-scale empirical study to systematically dissect the R-Learner framework on graphs. We provide the first rigorous evidence that the primary driver of performance is the inductive bias of the final-stage CATE estimator, an effect that dominates the choice of nuisance models. Our central finding is the quantification of a catastrophic "representation bottleneck": we prove with overwhelming statistical significance (p < 0.001) that R-Learners with a graph-blind final stage fail completely (MSE > 4.0), even when paired with powerful GNN nuisance models. Conversely, our proposed end-to-end Graph R-Learner succeeds and significantly outperforms a strong, non-DML GNN T-Learner baseline. Furthermore, we identify and provide a mechanistic explanation for a subtle, topology-dependent "nuisance bottleneck," linking it to GNN over-squashing via a targeted "Hub-Periphery Trade-off" analysis. Our findings are validated across diverse synthetic and semi-synthetic benchmarks. We release our code as a reproducible benchmark to facilitate future research on this critical "final-stage bottleneck."

Large language models (LLMs) have demonstrated remarkable performance on single-turn text-to-SQL tasks, but real-world database applications predominantly require multi-turn interactions to handle ambiguous queries, execution errors, and evolving user requirements. Existing multi-turn benchmarks fall short by treating conversation histories as static context or limiting evaluation to read-only operations, failing to reflect production-grade database assistant challenges. We introduce BIRD-INTERACT, a benchmark that restores this realism through: (1) a comprehensive interaction environment coupling each database with a hierarchical knowledge base, metadata files, and a function-driven user simulator, enabling models to solicit clarifications, retrieve knowledge, and recover from errors without human supervision; (2) two evaluation settings consisting of a pre-defined conversational protocol (c-Interact) and an open-ended agentic setting (a-Interact) where models autonomously decide when to query the user simulator or explore the environment; (3) a challenging task suite covering the full CRUD spectrum for business-intelligence and operational use cases, guarded by executable test cases. Each task features ambiguous and follow-up sub-tasks requiring dynamic interaction. The suite comprises BIRD-INTERACT-FULL (600 tasks, up to 11,796 interactions) for comprehensive performance assessment, and BIRD-INTERACT-LITE (300 tasks with simplified databases) for detailed behavioral analysis and rapid method development. Our empirical results highlight BIRD-INTERACT's difficulty: GPT-5 completes only 8.67% of tasks in c-Interact and 17.00% in a-Interact. Analysis via memory grafting and Interaction Test-time Scaling validates the importance of effective interaction for complex, dynamic text-to-SQL tasks.

Toxic conversations during software development interactions may have serious repercussions on a Free and Open Source Software (FOSS) development project. For example, victims of toxic conversations may become afraid to express themselves, therefore get demotivated, and may eventually leave the project. Automated filtering of toxic conversations may help a FOSS community to maintain healthy interactions among its members. However, off-the-shelf toxicity detectors perform poorly on Software Engineering (SE) datasets, such as one curated from code review comments. To encounter this challenge, we present ToxiCR, a supervised learning-based toxicity identification tool for code review interactions. ToxiCR includes a choice to select one of the ten supervised learning algorithms, an option to select text vectorization techniques, eight preprocessing steps, and a large-scale labeled dataset of 19,571 code review comments. Two out of those eight preprocessing steps are SE domain specific. With our rigorous evaluation of the models with various combinations of preprocessing steps and vectorization techniques, we have identified the best combination for our dataset that boosts 95.8% accuracy and 88.9% F1 score. ToxiCR significantly outperforms existing toxicity detectors on our dataset. We have released our dataset, pre-trained models, evaluation results, and source code publicly available at: https://github.com/WSU-SEAL/ToxiCR

As an important modeling paradigm in click-through rate (CTR) prediction, the Deep & Cross Network (DCN) and its derivative models have gained widespread recognition primarily due to their success in a trade-off between computational cost and performance. This paradigm employs a cross network to explicitly model feature interactions with linear growth, while leveraging deep neural networks (DNN) to implicitly capture higher-order feature interactions. However, these models still face several key limitations: (1) The performance of existing explicit feature interaction methods lags behind that of implicit DNN, resulting in overall model performance being dominated by the DNN; (2) While these models claim to capture high-order feature interactions, they often overlook potential noise within these interactions; (3) The learning process for different interaction network branches lacks appropriate supervision signals; and (4) The high-order feature interactions captured by these models are often implicit and non-interpretable due to their reliance on DNN. To address the identified limitations, this paper proposes a novel model, called Fusing Cross Network (FCN), along with two sub-networks: Linear Cross Network (LCN) and Exponential Cross Network (ECN). FCN explicitly captures feature interactions with both linear and exponential growth, eliminating the need to rely on implicit DNN. Moreover, we introduce the Self-Mask operation to filter noise layer by layer and reduce the number of parameters in the cross network by half. To effectively train these two cross networks, we propose a simple yet effective loss function called Tri-BCE, which provides tailored supervision signals for each network. We evaluate the effectiveness, efficiency, and interpretability of FCN on six benchmark datasets. Furthermore, by integrating LCN and ECN, FCN achieves a new state-of-the-art performance.

Previous works on Treatment Effect Estimation (TEE) are not in widespread use because they are predominantly theoretical, where strong parametric assumptions are made but untractable for practical application. Recent work uses multilayer perceptron (MLP) for modeling casual relationships, however, MLPs lag far behind recent advances in ML methodology, which limits their applicability and generalizability. To extend beyond the single domain formulation and towards more realistic learning scenarios, we explore model design spaces beyond MLPs, i.e., transformer backbones, which provide flexibility where attention layers govern interactions among treatments and covariates to exploit structural similarities of potential outcomes for confounding control. Through careful model design, Transformers as Treatment Effect Estimators (TransTEE) is proposed. We show empirically that TransTEE can: (1) serve as a general purpose treatment effect estimator that significantly outperforms competitive baselines in a variety of challenging TEE problems (e.g., discrete, continuous, structured, or dosage-associated treatments) and is applicable to both when covariates are tabular and when they consist of structural data (e.g., texts, graphs); (2) yield multiple advantages: compatibility with propensity score modeling, parameter efficiency, robustness to continuous treatment value distribution shifts, explainable in covariate adjustment, and real-world utility in auditing pre-trained language models

Click-through rate (CTR) prediction, which aims to predict the probability of a user clicking on an ad or an item, is critical to many online applications such as online advertising and recommender systems. The problem is very challenging since (1) the input features (e.g., the user id, user age, item id, item category) are usually sparse and high-dimensional, and (2) an effective prediction relies on high-order combinatorial features (a.k.a. cross features), which are very time-consuming to hand-craft by domain experts and are impossible to be enumerated. Therefore, there have been efforts in finding low-dimensional representations of the sparse and high-dimensional raw features and their meaningful combinations. In this paper, we propose an effective and efficient method called the AutoInt to automatically learn the high-order feature interactions of input features. Our proposed algorithm is very general, which can be applied to both numerical and categorical input features. Specifically, we map both the numerical and categorical features into the same low-dimensional space. Afterwards, a multi-head self-attentive neural network with residual connections is proposed to explicitly model the feature interactions in the low-dimensional space. With different layers of the multi-head self-attentive neural networks, different orders of feature combinations of input features can be modeled. The whole model can be efficiently fit on large-scale raw data in an end-to-end fashion. Experimental results on four real-world datasets show that our proposed approach not only outperforms existing state-of-the-art approaches for prediction but also offers good explainability. Code is available at: https://github.com/DeepGraphLearning/RecommenderSystems.

Predicting how deformable objects evolve under robotic manipulation is a longstanding challenge. Existing approaches typically rely on per-object optimization to fit material parameters, which can be slow and cannot generalize, while end-to-end learned alternatives extrapolate poorly and often violate basic physical structure. We present PhysCoRe, a physics-corrected residual world model that couples a differentiable Material Point Method (MPM) simulator with two feed-forward neural networks. A material refinement module, Material from Motion (MfM), infers per-particle elasticity from visual observations, grounding the simulator in object-specific physics. A residual correction module, Residual from Dynamics (RfD), learns the discrepancy and predicts corrections to the simulator's internal dynamics, absorbing systematic biases that the analytical model cannot capture. This design also supports online material identification on novel objects. MfM adapts from limited interactions, and its predictive uncertainty steers further exploration toward the regions where its estimate is least confident. Experiments on real deformable-object manipulation sequences show that PhysCoRe outperforms state-of-the-art baselines in prediction accuracy, and that its predicted confidence forms a reliable distribution across the object's geometry, providing a natural signal for future confidence-guided exploration.

Late-interaction models offer state-of-the-art efficiency-effectiveness trade-offs for neural retrieval by enabling document representations to be pre-computed and efficiently indexed. Yet, their relatively simple interaction mechanisms, typically MaxSim, can limit their effectiveness compared to cross-encoders. MICE, a recently introduced re-ranking architecture, aims to combine cross-encoder-like effectiveness through expressive transformer-based scoring with reduced inference-time computation through document-side pre-computation. However, no practical way to store these document representations was explored. We address this limitation here and introduce MICE-P, the first end-to-end retrieval pipeline with MICE, based on PLAID to index the contextualized document token representations. We conduct a controlled comparison of MICE, ColBERT and cross-encoders by training comparable models using the Ettin Family under matched experimental conditions. Our results show that MICE-P defines a new class of retrieval architecture with an efficiency-effectiveness trade-off of its own: it matches late-interaction retrieval throughput while retaining the effectiveness of cross-encoders.

Recommendation systems (RS) help users find interested content and connect authors with their target audience. Most research in RS tends to focus either on predicting users' immediate feedback (like click-through rate) accurately or improving users' long-term engagement. However, they ignore the influence for authors and the lifelong interaction value (LIV) of user-author pairs, which is particularly crucial for improving the prosperity of social community in short-video platforms. Currently, reinforcement learning (RL) can optimize long-term benefits and has been widely applied in RS. In this paper, we introduce RL to Reinforce Lifelong Interaction Value of User-Author pairs (RLIV-UA) based on each interaction of UA pairs. To address the long intervals between UA interactions and the large scale of the UA space, we propose a novel Sparse Cross-Request Interaction Markov Decision Process (SCRI-MDP) and introduce an Adjacent State Approximation (ASA) method to construct RL training samples. Additionally, we introduce Multi-Task Critic Learning (MTCL) to capture the progressive nature of UA interactions (click -> follow -> gift), where denser interaction signals are leveraged to compensate for the learning of sparse labels. Finally, an auxiliary supervised learning task is designed to enhance the convergence of the RLIV-UA model. In offline experiments and online A/B tests, the RLIV-UA model achieves both higher user satisfaction and higher platform profits than compared methods.

A video assistant must speak when its instruction warrants a response and stay silent otherwise. We introduce a benchmark that evaluates this decision for the complete system of model, memory, and response controller. InteractionBench covers query responses, event triggers, and ongoing updates in 1,060 interactions over 812 videos, with 69 negative streams and 53 suites that pair counted events with look-alike near misses. It scores content accuracy, timing accuracy, and silence compliance on the video clock. Timely speech costs silence across systems. Polled Qwen3-VL-8B reaches 77.8 timing accuracy but 10.9 silence compliance. A native real-time interaction system reaches 29.2 silence compliance at 66.8 timing accuracy, yet emits on 89.9% of negative streams. No open-weight system clears a third of the near-miss suites. Fewer replies help only when chosen, as random deletion merely trades timing for silence. Offline scores miss these failures and mispredict online behavior. Adding restraint is costly, as the native system's controller adds little by itself and agentic systems add it only at about 30 s per poll.Project page: https://www.enxinsong.com/projects/interactionbench/ Code: https://github.com/Espere-1119-Song/InteractionBench Data: https://huggingface.co/datasets/InteractionBench/InteractionBench

Large language models (LLMs) have demonstrated growing competence in web page generation. However, existing text-driven approaches rely on complex prompts that impose substantial demands on users and offer limited expressivity for page layout and cross-page visual coherence. Image-driven paradigms, which take UI screenshots as input, align more closely with real development workflows. However, current benchmarks focus primarily on visual fidelity and lack a systematic evaluation of the interaction capabilities in generated artifacts. To address this gap, we introduce UI2App, the first benchmark targeting interaction inference, the ability to recover application behavior from screenshots alone, without any textual or behavioral guidance. UI2App comprises 327 screenshots grouped into 45 state-coherent screenshot sets for runnable multi-route web applications. We design an end-to-end pipeline that evaluates each artifact along four dimensions: executability, navigation reachability, visual fidelity, and interaction inference. The interaction metric (IIS) assesses inferred interactions by functional correctness and state-management complexity, crediting any valid implementation rather than matching a single reference. Experiments on six frontier vision-language models reveal a marked capability mismatch between visual reconstruction and interaction realization: the visual-fidelity leader scores only 7.5 on IIS, ranking fourth and trailing the IIS leader by 5.2x. High-complexity interactions such as cross-page state remain a pervasive bottleneck, with half of the evaluated models scoring exactly zero on this dimension. Overall, the results indicate that inferring complete interaction behavior from static screenshots remains a key challenge for models.

Large language models (LLMs) are frequently fine-tuned or unlearned to adapt to new tasks or eliminate undesirable behaviors. While existing evaluation methods assess performance after such interventions, there remains no general approach for detecting unintended side effects, such as unlearning biology content degrading performance on chemistry tasks, particularly when these effects are unpredictable or emergent. To address this issue, we introduce MNEME, Model diffiNg for Evaluating Mechanistic Effects, a lightweight framework for identifying these side effects using sparse model diffing. MNEME compares base and fine-tuned models on task-agnostic data (for example, The Pile, LMSYS-Chat-1M) without access to fine-tuning data to isolate behavioral shifts. Applied to five LLMs across three scenarios: WMDP knowledge unlearning, emergent misalignment, and benign fine-tuning, MNEME achieves up to 95 percent accuracy in predicting side effects, aligning with known benchmarks and requiring no custom heuristics. Furthermore, we show that retraining on high-activation samples can partially reverse these effects. Our results demonstrate that sparse probing and diffing offer a scalable and automated lens into fine-tuning-induced model changes, providing practical tools for understanding and managing LLM behavior.

Latent world models enable planning by predicting the effects of actions in a learned representation space, but their predictions can become unreliable when test-time conditions differ from training. Existing test-time adaptation methods address this by updating parts of the pretrained model, often modifying millions of parameters and requiring a choice of which internal components to adapt. We introduce Sandwich-Residuals, a lightweight alternative that keeps the pretrained world model frozen and learns only small residual corrections around the predictor. The residuals are optimized online using the model's self-supervised prediction error and require no rewards, labels, or source-domain data. Across 21 conditions on the AdaJEPA benchmark, our method achieves 1.3times the success rate of the frozen model while retaining 95% of the performance of the strongest AdaJEPA variant and adapting 97-99% fewer parameters. Under compound shifts, this advantage increases to 1.9times the success rate of the frozen model, while remaining comparable to internal block adaptation. We further demonstrate the same adaptation principle on a DINO-WM model for 3-D manipulation. These results suggest that effective test-time adaptation of world models does not necessarily require modifying their pretrained internal weights.

Large language models (LLMs) have demonstrated prominent reasoning capabilities in recommendation tasks by transforming them into text-generation tasks. However, existing approaches either disregard or ineffectively model the user-item high-order interactions. To this end, this paper presents an enhanced LLM-based recommender (ELMRec). We enhance whole-word embeddings to substantially enhance LLMs' interpretation of graph-constructed interactions for recommendations, without requiring graph pre-training. This finding may inspire endeavors to incorporate rich knowledge graphs into LLM-based recommenders via whole-word embedding. We also found that LLMs often recommend items based on users' earlier interactions rather than recent ones, and present a reranking solution. Our ELMRec outperforms state-of-the-art (SOTA) methods in both direct and sequential recommendations.

Spurious correlations allow flexible models to predict well during training but poorly on related test distributions. Recent work has shown that models that satisfy particular independencies involving correlation-inducing nuisance variables have guarantees on their test performance. Enforcing such independencies requires nuisances to be observed during training. However, nuisances, such as demographics or image background labels, are often missing. Enforcing independence on just the observed data does not imply independence on the entire population. Here we derive mmd estimators used for invariance objectives under missing nuisances. On simulations and clinical data, optimizing through these estimates achieves test performance similar to using estimators that make use of the full data.

LLMs are now embedded in a wide range of everyday scenarios. However, their inherent hallucinations risk hiding misinformation in fluent responses, raising concerns about overreliance on AI. Detecting overreliance is challenging, as it often arises in complex, dynamic contexts and cannot be easily captured by post-hoc task outcomes. In this work, we aim to investigate how users' behavioral patterns correlate with overreliance. We collected interaction logs from 77 participants working with an LLM injected plausible misinformation across three real-world tasks and we assessed overreliance by whether participants detected and corrected these errors. By semantically encoding and clustering segments of user interactions, we identified five behavioral patterns linked to overreliance: users with low overreliance show careful task comprehension and fine-grained navigation; users with high overreliance show frequent copy-paste, skipping initial comprehension, repeated LLM references, coarse locating, and accepting misinformation despite hesitation. We discuss design implications for mitigation.

As generative large language models (LLMs) grow more performant and prevalent, we must develop comprehensive enough tools to measure and improve their fairness. Different prompt-based datasets can be used to measure social bias across multiple text domains and demographic axes, meaning that testing LLMs on more datasets can potentially help us characterize their biases more fully, and better ensure equal and equitable treatment of marginalized demographic groups. In this work, our focus is two-fold: (1) Benchmarking: a comparison of 6 different prompt-based bias and toxicity metrics across 12 demographic axes and 5 families of generative LLMs. Out of those 6 metrics, AdvPromptSet and HolisticBiasR are novel datasets proposed in the paper. The comparison of those benchmarks gives us insights about the bias and toxicity of the compared models. Therefore, we explore the frequency of demographic terms in common LLM pre-training corpora and how this may relate to model biases. (2) Mitigation: we conduct a comprehensive study of how well 3 bias/toxicity mitigation techniques perform across our suite of measurements. ROBBIE aims to provide insights for practitioners while deploying a model, emphasizing the need to not only measure potential harms, but also understand how they arise by characterizing the data, mitigate harms once found, and balance any trade-offs. We open-source our analysis code in hopes of encouraging broader measurements of bias in future LLMs.

Recent incidents involving LLMs used for mental-health support reveal a critical evaluation gap: surface-level safety scores do not capture how models behave across realistic, emotionally sensitive interactions over time. Existing benchmarks measure knowledge, safety, or static response quality, but miss whether LLM interactions help users keep reflecting, coping, and making decisions themselves. We formalize this missing dimension as COGNITIVE ATROPHY, a process-level behavioural measure in AI-mediated mental-health support distinct from safety and helpfulness. To measure it, we introduce COGNITIVE ATROPHY BENCH, a clinically grounded benchmark built from 1,576 fully human-generated counseling conversations, 15,680 turns, and 42,230 responses from five LLMs. Three clinical and neuropsychology experts developed a 20-attribute schema spanning user context, response behaviour, and global risk flags; six trained clinical reviewers applied it with span-grounded evidence, producing 5,324 reviewer judgments. We further introduce the User-Input Risk Index (UIRI), the Cognitive Atrophy Risk Index (ARI), and trajectory summaries. Across five LLMs, models show a consistent moderate-to-high level of atrophy-aligned behaviour across single and multi-turn settings. While models generally respond to overt safety cues, they adapt less reliably when users seek solutions or decisions. The dominant recurring patterns are directive advice, problem-solving, recommendation responses, topic shifts, and forms of validation that may reinforce dependence rather than reflection. Our work makes COGNITIVE ATROPHY measurable and provides a foundation for auditing model behaviour in sensitive LLM conversations.

Combination therapies have become the standard of care for diseases such as cancer, tuberculosis, malaria and HIV. However, the combinatorial set of available multi-drug treatments creates a challenge in identifying effective combination therapies available in a situation. To assist medical professionals in identifying beneficial drug-combinations, we construct an expert-annotated dataset for extracting information about the efficacy of drug combinations from the scientific literature. Beyond its practical utility, the dataset also presents a unique NLP challenge, as the first relation extraction dataset consisting of variable-length relations. Furthermore, the relations in this dataset predominantly require language understanding beyond the sentence level, adding to the challenge of this task. We provide a promising baseline model and identify clear areas for further improvement. We release our dataset, code, and baseline models publicly to encourage the NLP community to participate in this task.

Environments are the foundation of recursive self-improvement: they provide the problems agents work on and the feedback used to evaluate progress. Yet constructing challenging research environments with reliable evaluation still depends on domain experts, limiting their scale and disciplinary coverage. We introduce RSI-Forge, a multi-agent pipeline that turns published papers into executable environments for self-improvement. Three agents coordinate construction, reproduction, and review to produce tasks with automated evaluators; each paper's method is independently reimplemented to establish a baseline score. We present 210 environments across 18 fields, including 90 reviewed by independent human domain experts. Both experts and agent judges give high ratings to the potential for improving the provided starting solutions and the evaluators' ability to distinguish solution quality, whereas experts are more critical of shortcut resistance, faithfulness to the source paper, and whether a single idea can exhaust a task. To validate their use for repeated improvement, we evaluate four models over 3 successive attempts on 120 environments, with each attempt inheriting prior code and notes while model weights remain fixed. At least one model improves after the first attempt in 84% of environments. Models also outperform the reproduced paper methods in 68 of the 120 environments, demonstrating room for gains beyond these baselines. Transcript analysis identifies work beyond parameter tuning in 95% of these successful attempts. Analysis of the resulting trajectories shows that models scoring lower on these tasks explore less, more often accept gains smaller than the reported standard error, and rely more heavily on tuning to the development set. RSI-Forge provides a scalable approach to constructing research environments for training and evaluating self-improving agents.

Small sample sizes are common in many disciplines, which necessitates pooling roughly similar datasets across multiple institutions to study weak but relevant associations between images and disease outcomes. Such data often manifest shift/imbalance in covariates (i.e., secondary non-imaging data). Controlling for such nuisance variables is common within standard statistical analysis, but the ideas do not directly apply to overparameterized models. Consequently, recent work has shown how strategies from invariant representation learning provides a meaningful starting point, but the current repertoire of methods is limited to accounting for shifts/imbalances in just a couple of covariates at a time. In this paper, we show how viewing this problem from the perspective of Category theory provides a simple and effective solution that completely avoids elaborate multi-stage training pipelines that would otherwise be needed. We show the effectiveness of this approach via extensive experiments on real datasets. Further, we discuss how this style of formulation offers a unified perspective on at least 5+ distinct problem settings, from self-supervised learning to matching problems in 3D reconstruction.