Daily Papers

Speculative decoding accelerates autoregressive generation by having a cheap draft propose tokens that a target verifies in parallel. Frontier models increasingly ship a built-in Multi-Token-Prediction (MTP/NEXTN) draft head under the assumption that the draft is negligibly cheap. At million-token context this breaks: an MTP draft head typically runs full attention over the entire KV cache at every draft step, so its read grows linearly with context and comes to dominate the draft cost -- precisely where speculation is most valuable. The effect compounds with draft length (a deep native draft can turn net-negative, slower than no speculation) and sharpens under hybrid/linear-attention targets, where cheaper verification leaves the draft's full-attention read exposed. We apply a StreamingLLM-style sliding window plus attention sink to the draft's attention only (Windowed-MTP), leaving full-attention verification intact. It is training-free, drop-in, and lossless by construction: the full-attention target still decides every accepted token, so windowing changes only which tokens are proposed, never which are accepted. It bounds the draft's KV working set to a constant, dropping ~99% of KV entries at 1M. Across three architecture families (Qwen GDN-MoE 35B/122B and a Mamba2-hybrid NoPE 120B) at 1M context on a single GPU in SGLang, windowing cuts the per-decode-step cost over the shipping native MTP draft by +28% to +44%, an input-invariant margin that widens with context. Since per-token latency is this cost divided by acceptance length, at matched acceptance end-to-end decode latency improves by the same amount, and more where windowing also lifts acceptance, while preserving the target's verified output distribution. Finally, the unread draft KV -- 7.7-11% of total KV at 1M -- is reclaimed via a compact ring buffer at no acceptance or quality cost.

As Large Language Models (LLMs) scale up, inference efficiency becomes a critical bottleneck. Multi-Token Prediction (MTP) could accelerate LLM inference by predicting multiple future tokens in parallel. However, existing MTP approaches still face two challenges: limited acceptance rates of MTP heads, and difficulties in jointly training multiple MTP heads. Therefore, we propose MTP-D, a simple yet effective self-distillation method with minimal additional training cost, which boosts MTP head acceptance rates (+7.5\%) while maximumly preserving main-head performance. We also introduce a looped extension strategy for MTP-D, enabling effective and economical MTP head extension and further significant inference speedup to 1-head MTP (+220.4\%). Moreover, we systematically explore and validate key insights on the distillation strategies and the potential scalability of MTP through extensive experiments on seven benchmarks. These results demonstrate that our MTP-D and looped extension strategy effectively enhance MTP-head performance and inference efficiency, facilitating the practical usage of MTP in LLMs.

Structured pruning and knowledge distillation (KD) are typical techniques for compressing large language models, but it remains unclear how they should be applied at pretraining scale, especially to recent mixture-of-experts (MoE) models. In this work, we systematically study MoE compression in large-scale pretraining, focusing on three key questions: whether pruning provides a better initialization than training from scratch, how expert compression choices affect the final model after continued training, and which training strategy is most effective. We have the following findings: First, across depth, width, and expert compression, pruning a pretrained MoE consistently outperforms training the target architecture from scratch under the same training budget. Second, different one-shot expert compression methods converge to similar final performance after large-scale continual pretraining. Motivated by this, we introduce a simple partial-preservation expert merging strategy that improves downstream performance across most benchmarks. Third, combining KD with the language modeling loss outperforms KD alone, particularly on knowledge-intensive tasks. We further propose multi-token prediction (MTP) distillation, which yields consistent gains. Finally, given the same training tokens, progressive pruning schedules outperform one-shot compression, suggesting that gradual architecture transitions lead to better optimization trajectories. Putting it all together, we compress Qwen3-Next-80A3B to a 23A2B model that retains competitive performance. These results offer practical guidance for efficient MoE compression at scale.

Speculative decoding accelerates large language model inference without changing the target distribution, but no single drafting structure performs best across real-world workloads. Autoregressive multi-token prediction (MTP) is a lightweight, stable proposal mechanism, whereas block-parallel diffusion amortizes drafting latency over much longer candidate sequences; the better choice depends strongly on the output distribution. We present AngelSpec, a unified training framework for MTP and block-parallel speculative decoding that addresses this heterogeneity at three levels. At the training level, rather than fitting one universal drafter to a uniform data mixture, we co-specialize structure and data: the MTP drafter is trained on diverse conversational data for high-entropy open-ended chat, and the block-diffusion drafter on code and mathematics data for longer predictable continuations. At the architecture level, we propose DFly, a block-diffusion framework combining a hybrid target-conditioning backbone with a predecessor-conditioned autoregressive head, improving target-feature utilization and intra-block dependency modeling while keeping generation parallel. At the inference level, both acceptance length and verification cost vary with domain, request, online load, and hardware, so DFly treats verification as a shared batch-level resource: it reallocates compute toward high-confidence prefixes across requests and combines expected utility with a profiled cost model to adapt verification depth online. Across the Hy3 series, DFly raises the average accepted length on Hy3-A21B by roughly 30% and attains the highest average throughput at every tested concurrency from 4 to 64, a 1.98-2.40x speedup over autoregressive decoding and 10.5-11.8% higher throughput than DFlash. We release AngelSpec to support training and extending these methods.

Detecting critical moments, such as emotional outbursts or changes in decisions during conversations, is crucial for understanding shifts in human behavior and their consequences. Our work introduces a novel problem setting focusing on these moments as turning points (TPs), accompanied by a meticulously curated, high-consensus, human-annotated multi-modal dataset. We provide precise timestamps, descriptions, and visual-textual evidence high-lighting changes in emotions, behaviors, perspectives, and decisions at these turning points. We also propose a framework, TPMaven, utilizing state-of-the-art vision-language models to construct a narrative from the videos and large language models to classify and detect turning points in our multi-modal dataset. Evaluation results show that TPMaven achieves an F1-score of 0.88 in classification and 0.61 in detection, with additional explanations aligning with human expectations.

Vision-Language Models (VLMs) have revolutionized document parsing by enabling end-to-end mapping from images to structured text, imposing a significant latency bottleneck, particularly for token-dense documents. While Multi-Token Prediction (MTP) has emerged as a promising approach for accelerating inference, its potential is constrained by optimization instability when scaling to deeper look-ahead depth. In this paper, we propose P-MTP, a framework that leverages Progressive Multi-Token Prediction with a lightweight MTP module to scale the look-ahead depth for high-throughput document parsing. Specifically, we introduce Progressive Curriculum Loss that adaptively re-weights different look-ahead depths using cumulative path reliability and retrospective target consistency. By effectively suppressing gradient noise in long-range predictions, P-MTP, facilitates an automated easy-to-hard optimization transition, enabling the model to master increasingly distant look-ahead depths. Furthermore, we propose Confidence-Gated Dynamic Drafting to maximize the effective look-ahead depth and acceptance rate by adaptively calibrating speculative length during inference, thereby minimizing computational waste and further pushing the boundaries of inference speedup. Experimental results across multiple benchmarks and architectures demonstrate that P-MTP, achieves up to a 5times speedup with negligible loss in accuracy, providing the first successful validation of extensive look-ahead MTP in the document parsing domain.

As large language models (LLMs) become increasingly powerful, the sequential nature of autoregressive generation creates a fundamental throughput bottleneck that limits the practical deployment. While Multi-Token Prediction (MTP) has demonstrated remarkable benefits for model training efficiency and performance, its inherent potential for inference acceleration remains largely unexplored. This paper introduces FastMTP, a simple yet effective method that improves multi-step draft quality by aligning MTP training with its inference pattern, significantly enhancing speculative decoding performance. Our approach fine-tunes a single MTP head with position-shared weights on self-distilled data, enabling it to capture dependencies among consecutive future tokens and maintain high acceptance rates across multiple recursive draft steps. By integrating language-aware dynamic vocabulary compression into the MTP head, we further reduce computational overhead in the drafting process. Experimental results across seven diverse benchmarks demonstrate that FastMTP achieves an average of 2.03x speedup compared to standard next token prediction with lossless output quality, outperforming vanilla MTP by 82%. FastMTP requires only lightweight training and seamlessly integrates with existing inference frameworks, offering a practical and rapidly deployable solution for accelerating LLM inference.

Tracking by detection has been the prevailing paradigm in the field of Multi-object Tracking (MOT). These methods typically rely on the Kalman Filter to estimate the future locations of objects, assuming linear object motion. However, they fall short when tracking objects exhibiting nonlinear and diverse motion in scenarios like dancing and sports. In addition, there has been limited focus on utilizing learning-based motion predictors in MOT. To address these challenges, we resort to exploring data-driven motion prediction methods. Inspired by the great expectation of state space models (SSMs), such as Mamba, in long-term sequence modeling with near-linear complexity, we introduce a Mamba-based motion model named Mamba moTion Predictor (MTP). MTP is designed to model the complex motion patterns of objects like dancers and athletes. Specifically, MTP takes the spatial-temporal location dynamics of objects as input, captures the motion pattern using a bi-Mamba encoding layer, and predicts the next motion. In real-world scenarios, objects may be missed due to occlusion or motion blur, leading to premature termination of their trajectories. To tackle this challenge, we further expand the application of MTP. We employ it in an autoregressive way to compensate for missing observations by utilizing its own predictions as inputs, thereby contributing to more consistent trajectories. Our proposed tracker, MambaTrack, demonstrates advanced performance on benchmarks such as Dancetrack and SportsMOT, which are characterized by complex motion and severe occlusion.

Large language models (LLMs) exhibit latent multi-token prediction (MTP) capabilities despite being trained solely for next-token generation. We propose a simple, training-free MTP approach that probes an LLM using on-the-fly mask tokens drawn from its embedding space, enabling parallel prediction of future tokens without modifying model weights or relying on auxiliary draft models. Our method constructs a speculative token tree by sampling top-K candidates from mask-token logits and applies a lightweight pruning strategy to retain high-probability continuations. During decoding, candidate predictions are verified in parallel, resulting in lossless generation while substantially reducing the number of model calls and improving token throughput. Across benchmarks, our probing-based MTP consistently outperforms existing training-free baselines, increasing acceptance length by approximately 12\% on LLaMA3 and 8--12\% on Qwen3, and achieving throughput gains of up to 15--19\%. Finally, we provide theoretical insights and empirical evidence showing that decoder layers naturally align mask-token representations with next-token states, enabling accurate multi-step prediction without retraining or auxiliary models.

Multi-token prediction (MTP) is a recently proposed pre-training objective for language models. Rather than predicting only the next token (NTP), MTP predicts the next k tokens at each prediction step, using multiple prediction heads. MTP has shown promise in improving downstream performance, inference speed, and training efficiency, particularly for large models. However, prior work has shown that smaller language models (SLMs) struggle with the MTP objective. To address this, we propose a curriculum learning strategy for MTP training, exploring two variants: a forward curriculum, which gradually increases the complexity of the pre-training objective from NTP to MTP, and a reverse curriculum, which does the opposite. Our experiments show that the forward curriculum enables SLMs to better leverage the MTP objective during pre-training, improving downstream NTP performance and generative output quality, while retaining the benefits of self-speculative decoding. The reverse curriculum achieves stronger NTP performance and output quality, but fails to provide any self-speculative decoding benefits.

Reinforcement learning (RL) has become a key component in modern large language models, yet the rollout stage remains the key bottleneck in RL training pipelines. Although Multi-Token Prediction (MTP) offers a natural solution to accelerate rollouts through speculative decoding, many studies have observed that MTP acceptance rates degrade significantly during RL training, leading to limited speedup performance. To address this bottleneck, we present Bebop, a systematic study of MTP in LLM post-training, and offer practical recipes to integrate MTP into large-scale RL pipelines. First, we reveal that the MTP acceptance rate is fundamentally bounded by the fluctuation of model entropy, which demonstrates a clear negative linear relationship with the rise of entropy in the RL stage. Second, we show that probabilistic rejection sampling largely alleviates the disturbance introduced by entropy in RL compared to greedy draft sampling. We further identify that the conventional MTP training objectives (cross-entropy or KL) are suboptimal in such settings, and therefore we propose a novel end-to-end TV loss that directly optimizes multi-step rejection sampling acceptance rate, yielding ~10% acceptance rate improvements, achieving up to 95% acceptance rates and up to 25% extra inference throughput gains across mathematical reasoning, code generation, and agentic tasks. Third, we test various online MTP training strategies during RL and show that pre-RL MTP training with e2e TV loss and rejection sampling achieves a consistent acceptance rate and speedup throughout the entire RL, eliminating the need for costly online MTP updating. We provide extensive experiments and analysis that validate our findings. Experimental results show our method achieves up to 1.8x end-to-end acceleration in async RL training of Qwen3.5, Qwen3.6, and Qwen3.7 models.

We present MiMo-V2-Flash, a Mixture-of-Experts (MoE) model with 309B total parameters and 15B active parameters, designed for fast, strong reasoning and agentic capabilities. MiMo-V2-Flash adopts a hybrid attention architecture that interleaves Sliding Window Attention (SWA) with global attention, with a 128-token sliding window under a 5:1 hybrid ratio. The model is pre-trained on 27 trillion tokens with Multi-Token Prediction (MTP), employing a native 32k context length and subsequently extended to 256k. To efficiently scale post-training compute, MiMo-V2-Flash introduces a novel Multi-Teacher On-Policy Distillation (MOPD) paradigm. In this framework, domain-specialized teachers (e.g., trained via large-scale reinforcement learning) provide dense and token-level reward, enabling the student model to perfectly master teacher expertise. MiMo-V2-Flash rivals top-tier open-weight models such as DeepSeek-V3.2 and Kimi-K2, despite using only 1/2 and 1/3 of their total parameters, respectively. During inference, by repurposing MTP as a draft model for speculative decoding, MiMo-V2-Flash achieves up to 3.6 acceptance length and 2.6x decoding speedup with three MTP layers. We open-source both the model weights and the three-layer MTP weights to foster open research and community collaboration.

We present Kwaipilot-AutoThink (KAT), an open-source 40B large language model developed to address the overthinking problem in reasoning-intensive tasks, where an automatic thinking training paradigm is proposed to dynamically switch between reasoning and non-reasoning modes based on task complexity. Specifically, first, we construct the dual-regime dataset based on a novel tagging pipeline and a multi-agent synthesis strategy, and then we apply Multi-Token Prediction (MTP)-enhanced knowledge distillation, enabling efficient and fine-grained reasoning transfer with minimal pretraining cost. Besides, we implement a cold-start initialization strategy that introduces mode-selection priors using majority-vote signals and intent-aware prompting. Finally, we propose Step-SRPO, a reinforcement learning algorithm that incorporates intermediate supervision into the GRPO framework, offering structured guidance over both reasoning-mode selection and response accuracy. Extensive experiments across multiple benchmarks demonstrate that KAT consistently matches or even outperforms current state-of-the-art models, including DeepSeek-R1-0528 and Qwen3-235B-A22B, across a wide range of reasoning-intensive tasks while reducing token usage by up to approximately 30\%. Beyond academic evaluation, KAT has been successfully deployed in Kwaipilot (i.e., Kuaishou's internal coding assistant), and improves real-world development workflows with high accuracy, efficiency, and controllable reasoning behaviors. Moreover, we are actively training a 200B Mixture-of-Experts (MoE) with 40B activation parameters, where the early-stage results already demonstrate promising improvements in performance and efficiency, further showing the scalability of the AutoThink paradigm.

Reinforcement Learning from Verifiable Rewards (RLVR) has emerged as the standard paradigm for improving reasoning capability of large language models, while Multi-Token Prediction (MTP) has been a widely adopted module in pretraining. Combining them is a natural approach, yet current RL practices detach MTP gradients because joint training degrades the performance. We revisit this failure from an optimization perspective. We show that the per-step effect of MTP on the RL objective can be decomposed into two terms: a first-order correlation and a second-order perturbation penalty. This decomposition unifies three MTP training regimes: Detach, Cross-Entropy loss, and Policy loss, and explains why each succeeds or fails. Further analysis of policy loss reveals that, although it aligns with intuition, performance still degrades: the correlation term decays while the quadratic penalty persists. Guided by the analysis, we propose Optimal Coefficient Calibration (OCC), an adaptive scheme that tracks the optimal coefficient online via a log-probability proxy at negligible cost. Across six competition-level mathematical reasoning benchmarks, OCC consistently matches or exceeds the detach baseline, delivering improved joint MTP-RL training performance.

Vehicle-to-everything technologies (V2X) have become an ideal paradigm to extend the perception range and see through the occlusion. Exiting efforts focus on single-frame cooperative perception, however, how to capture the temporal cue between frames with V2X to facilitate the prediction task even the planning task is still underexplored. In this paper, we introduce the Co-MTP, a general cooperative trajectory prediction framework with multi-temporal fusion for autonomous driving, which leverages the V2X system to fully capture the interaction among agents in both history and future domains to benefit the planning. In the history domain, V2X can complement the incomplete history trajectory in single-vehicle perception, and we design a heterogeneous graph transformer to learn the fusion of the history feature from multiple agents and capture the history interaction. Moreover, the goal of prediction is to support future planning. Thus, in the future domain, V2X can provide the prediction results of surrounding objects, and we further extend the graph transformer to capture the future interaction among the ego planning and the other vehicles' intentions and obtain the final future scenario state under a certain planning action. We evaluate the Co-MTP framework on the real-world dataset V2X-Seq, and the results show that Co-MTP achieves state-of-the-art performance and that both history and future fusion can greatly benefit prediction.

Foundation models have reshaped the landscape of Remote Sensing (RS) by enhancing various image interpretation tasks. Pretraining is an active research topic, encompassing supervised and self-supervised learning methods to initialize model weights effectively. However, transferring the pretrained models to downstream tasks may encounter task discrepancy due to their formulation of pretraining as image classification or object discrimination tasks. In this study, we explore the Multi-Task Pretraining (MTP) paradigm for RS foundation models to address this issue. Using a shared encoder and task-specific decoder architecture, we conduct multi-task supervised pretraining on the SAMRS dataset, encompassing semantic segmentation, instance segmentation, and rotated object detection. MTP supports both convolutional neural networks and vision transformer foundation models with over 300 million parameters. The pretrained models are finetuned on various RS downstream tasks, such as scene classification, horizontal and rotated object detection, semantic segmentation, and change detection. Extensive experiments across 14 datasets demonstrate the superiority of our models over existing ones of similar size and their competitive performance compared to larger state-of-the-art models, thus validating the effectiveness of MTP.

Large language models (LLMs) have achieved notable progress. Despite their success, next-token prediction (NTP), the dominant method for LLM training and inference, is constrained in both contextual coverage and inference efficiency due to its inherently sequential process. To overcome these challenges, we propose leap multi-token prediction~(L-MTP), an innovative token prediction method that extends the capabilities of multi-token prediction (MTP) by introducing a leap-based mechanism. Unlike conventional MTP, which generates multiple tokens at adjacent positions, L-MTP strategically skips over intermediate tokens, predicting non-sequential ones in a single forward pass. This structured leap not only enhances the model's ability to capture long-range dependencies but also enables a decoding strategy specially optimized for non-sequential leap token generation, effectively accelerating inference. We theoretically demonstrate the benefit of L-MTP in improving inference efficiency. Experiments across diverse benchmarks validate its merit in boosting both LLM performance and inference speed. The source code is available at https://github.com/Xiaohao-Liu/L-MTP.

Speculative decoding accelerates Large Language Model (LLM) inference by decoupling draft generation from target verification. While recent parallel drafters efficiently propose long token sequences in a single forward pass, they suffer from rapid acceptance decay due to a lack of inter-token dependencies. Furthermore, indiscriminately verifying these extended blocks wastes critical batch capacity on tokens with high rejection risks, severely degrading throughput in high-concurrency serving systems. We introduce DSpark, a speculative decoding framework that unifies high-throughput parallel generation with adaptive, load-aware verification. To maintain draft quality, DSpark utilizes a semi-autoregressive architecture, coupling a parallel backbone with a lightweight sequential module, to introduce intra-block dependency modeling and mitigate suffix decay. To optimize system efficiency, DSpark employs confidence-scheduled verification, dynamically tailoring the verification length for each request based on estimated prefix survival probabilities and engine-specific throughput profiles. On offline benchmarks across diverse domains, DSpark substantially improves the accepted length over state-of-the-art autoregressive and parallel drafters. When deployed within the DeepSeek-V4 serving system under live user traffic, DSpark successfully mitigates verification waste. Compared to the established production baseline (MTP-1), DSpark accelerates per-user generation speeds by 60 to 85 percent at matched throughput levels. More importantly, by preventing severe throughput degradation under strict interactivity constraints, it enables performance tiers that were previously unattainable, shifting the Pareto frontier of our serving system.

Speculative decoding accelerates LLM inference by drafting future tokens with a small model, but drafter models degrade sharply under template perturbation and long-context inputs. We identify a previously-unreported phenomenon we call attention drift: as the drafter generates successive tokens within a speculation chain, attention progressively moves from the prompt onto its own recently-generated tokens. We observe this across both EAGLE3 drafters and MTP heads, suggesting drift is a property of drafter designs. We trace this to the un-normalized residual path between chain steps: the drafter's hidden state magnitude grows monotonically with chain depth, which exhibits dynamics consistent with additional pre-norm transformer layers stacked on the target rather than as a standalone autoregressive predictor. In order to limit the growth, we propose two architectural changes: Post-norm on the drafter hidden states and per-hidden-state RMSNorm after capturing target hidden states. Our interventions improve acceptance length over the current leading model, pre-norm EAGLE3, by up to 2times under template perturbation, 1.18times on long-context tasks, and 1.10times on seven standard benchmarks spanning multi-turn chat, math, and coding. Our changes also allow shorter train-time-test depths to generalize over longer drafting sequences.

Byte-level hierarchical language models (LMs) have recently emerged as a robust alternative to their popular counterparts that use subword tokenization. However, generating one byte at a time remains a bottleneck for inference speed. To address this, we introduce multi-byte prediction (MBP), which generates multiple bytes in parallel, speeding up inference with minimal performance impact and no additional parameters. MBP builds on the popular multi-token prediction (MTP) paradigm with two crucial innovations. First, we introduce a variable-length prediction window that aligns with the latent tokens, or segments, of a hierarchical LM. Second, we implement a novel attention-masking scheme that enables parallel byte prediction without violating causality. We show that multi-byte prediction strikes a Pareto-optimal trade-off across multiple generative tasks, instruction following, question answering, summarization, and machine translation, achieving the best trade-off between performance and inference throughput.

Computing the matrix square root or its inverse in a differentiable manner is important in a variety of computer vision tasks. Previous methods either adopt the Singular Value Decomposition (SVD) to explicitly factorize the matrix or use the Newton-Schulz iteration (NS iteration) to derive the approximate solution. However, both methods are not computationally efficient enough in either the forward pass or in the backward pass. In this paper, we propose two more efficient variants to compute the differentiable matrix square root. For the forward propagation, one method is to use Matrix Taylor Polynomial (MTP), and the other method is to use Matrix Pad\'e Approximants (MPA). The backward gradient is computed by iteratively solving the continuous-time Lyapunov equation using the matrix sign function. Both methods yield considerable speed-up compared with the SVD or the Newton-Schulz iteration. Experimental results on the de-correlated batch normalization and second-order vision transformer demonstrate that our methods can also achieve competitive and even slightly better performances. The code is available at https://github.com/KingJamesSong/FastDifferentiableMatSqrt{https://github.com/KingJamesSong/FastDifferentiableMatSqrt}.

We introduce Nemotron-Labs-Diffusion, a tri-mode language model (LM) that unifies AR, diffusion, and self-speculation decoding within a single architecture. Trained with a joint AR-diffusion objective, Nemotron-Labs-Diffusion can switch modes to sustain high throughput across deployment settings and concurrency levels. Our study shows that (1) AR and diffusion objectives are complementary: diffusion improves lookahead planning, while AR provides left-to-right linguistic priors. (2) In self-speculation mode, diffusion drafts while AR verifies, outperforming multi-token prediction (MTP) methods in both acceptance rate and real-device efficiency. (3) A speed-of-light analysis further demonstrates diffusion's long-term potential, with up to 76.5% more tokens per forward pass than self-speculation under an optimal sampler. Scaling to 3B, 8B, and 14B parameters, our Nemotron-Labs-Diffusion family, including base, instruct, and vision-language models, consistently outperforms state-of-the-art open-source AR and diffusion LMs in both accuracy and speed. For example, Nemotron-Labs-Diffusion-8B decodes 6x more tokens per forward than Qwen3-8B with comparable accuracy, translating to 4x higher throughput on SPEED-Bench with SGLang on a GB200 GPU.

Efficient teamwork typically combines global coordination with parallel execution, a principle not yet fully reflected in unified Vision-Language Model (VLM)-based document parsers. Existing unified parsers process an entire page jointly but generate its output through a single token-by-token autoregressive trajectory, creating a sequential bottleneck that grows with document length. Such full-page sequential generation overlooks a key property of document parsing: layout must be analyzed globally, whereas block content can be parsed in parallel. Based on this observation, we introduce HPD-Parsing, which replaces full-page autoregressive generation with a Hierarchical Parallel Decoding paradigm. A main layout branch organizes the overall document structure and dynamically assigns block-level content decoding to concurrent branches, while progressive multi-token prediction (P-MTP) further reduces the decoding steps within each branch. Experiments on public benchmarks show that HPD-Parsing achieves 4,752 tokens per second, delivering 2.62times the throughput of the fastest existing document parsing model and 3.06times that of the vanilla autoregressive baseline, while maintaining competitive parsing accuracy. These results establish hierarchical parallel decoding as an effective alternative to full-page autoregressive generation, opening a new direction for efficient unified document parsing.

Large language models (LLMs) face low hardware efficiency during decoding, especially for long-context reasoning tasks. This paper introduces Step-3, a 321B-parameter VLM with hardware-aware model-system co-design optimized for minimizing decoding costs. Step-3 innovates in two key dimensions: (1) A novel Multi-Matrix Factorization Attention (MFA) mechanism that significantly reduces both KV cache size and computation while maintaining high attention expressiveness, and (2) Attention-FFN Disaggregation (AFD), a distributed inference system that decouples attention and Feed-Forward Network (FFN) layers into specialized subsystems. This co-design achieves unprecedented cost efficiency: Step-3 significantly reduces theoretical decoding costs compared with models like DeepSeek-V3 and Qwen3 MoE 235B, with the gains widening at longer context. Step-3 achieves low cost while activating 38B parameters per token (more than DeepSeek-V3 and Qwen3 MoE 235B), demonstrating that hardware-aligned attention arithmetic intensity, MoE sparsity, and AFD are critical to cost-effectiveness. We perform a head-to-head comparison with DeepSeek-V3 in its favorable scenarios. Our implementation on Hopper GPUs achieves a decoding throughput of up to 4,039 tokens per second per GPU under 50ms TPOT SLA (4K context, FP8, no MTP). It is higher than DeepSeek-V3's 2,324 in the same setup and sets a new Pareto frontier for LLM decoding.

RL post-training of frontier language models is increasingly bottlenecked by autoregressive rollout generation, making rollout acceleration a central systems challenge. Many existing efficiency methods improve throughput by changing the rollout or optimization regime, for example, through off-policy execution, replay, or lower-precision generation. We study speculative decoding as a lossless acceleration primitive for RL rollouts that preserves the target model's output distribution. We implement speculative decoding in NeMo-RL with a vLLM backend, supporting both synchronous and asynchronous pipelines and enabling speculation during RL rollouts. This benefit is realizable across speculation mechanisms, such as pretrained MTP heads, small external draft models or even techniques such as Eagle3, which are traditionally applied after RL phase. This yields a deployment path for state-of-the-art speculative decoding inside RL training. In a reasoning post-training workload at 8B scale under synchronous RL, speculative decoding improves rollout throughput by 1.8x. Using a high-fidelity performance simulator, we project that combining speculative decoding with asynchronous RL yields up to 2.5x end-to-end training speedup at 235B scale.

Multi-head Latent Attention (MLA), the attention used in DeepSeek-V2/V3, jointly compresses keys and values into a low-rank latent and matches the H100 roofline almost perfectly. Its trained weights, however, expose only one decoding path - an absorbed MQA form - which ties efficient inference to H100-class compute-bandwidth ratios, forfeits tensor parallelism along the head axis, and yields no Multi-Token Prediction (MTP) gain on commodity inference GPUs such as the export-restricted H20. We propose Group-Query Latent Attention (GQLA), a minimal modification of MLA whose trained weights expose two algebraically equivalent decoding paths over the same parameters: an MQA-absorb path identical to MLA's, and a GQA path with a per-group expanded cache. The runtime picks the path that matches the target hardware - no retraining, no custom kernels - so a single set of GQLA weights pins the rooflines of both H100 (MQA-absorb, s_q=1) and H20 (GQA + MTP, s_q=2), while supporting up to 8-way zero-redundancy tensor parallelism on the GQA path. To avoid pretraining from scratch we extend TransMLA into TransGQLA, which converts a pretrained GQA checkpoint into a GQLA model; on LLaMA-3-8B it compresses the per-token KV cache to 28.125% of the GQA baseline on the MQA-absorb path while structurally preserving GQA-level traffic on the per-group path.

Mainstream LLM serving systems reuse prefix work mainly through paged or radix key-value (KV) caches. This is highly effective for high-throughput, high-concurrency serving, but it manages only one positional fragment of execution state: the KV cache. We study the opposite regime: low-latency, small-batch, on-device physical-AI serving, where interactive LLM agents, speech systems, and robot policies repeatedly branch, reset, interrupt, and re-enter under tight responsiveness budgets. We introduce execution-state capsules, a graph-bound checkpoint and restore mechanism for the complete restorable state at a committed boundary. FlashRT is a white-box, backend-facing kernel runtime whose evaluated NVIDIA CUDA backend runs captured graph plans over contiguous static buffers with no block-table indirection. Because the live state is a closed set of named buffers, a capsule can snapshot, restore, fork, or roll back the whole execution boundary, including KV, recurrent state, convolution state, MTP state, and metadata. This moves reuse from token-addressed KV fragments to graph-bound execution-state boundaries. On an RTX 5090, capsule restore is byte-exact at the stored-state level and token-identical under greedy decode. A KV-only ablation diverges, showing that recurrent state is load-bearing. GPU-resident snapshot and restore are sub-millisecond, and TTFT speedup over cold prefill grows from 3.9x at 2k tokens to 27x at 16k tokens. On Jetson AGX Thor and DGX Spark, the same correctness and structural properties hold. Capsules are not a replacement for high-throughput KV-cache serving; they define a complementary latency-first serving point for explicit execution-state reuse.

Next-token prediction (NTP) has driven the success of large language models (LLMs), but it struggles with long-horizon reasoning, planning, and creative writing, with these limitations largely attributed to teacher-forced training. Multi-token prediction (MTP) partially mitigates these issues by predicting several future tokens at once, but it mostly captures short-range dependencies and offers limited improvement. We propose future summary prediction (FSP), which trains an auxiliary head to predict a compact representation of the long-term future, preserving information relevant for long-form generations. We explore two variants of FSP: handcrafted summaries, for example, a bag of words summary of the future sequence, and learned summaries, which use embeddings produced by a reverse language model trained from right-to-left order. Large-scale pretraining experiments (3B and 8B-parameter models) demonstrate that FSP provides improvements over both NTP and MTP across math, reasoning, and coding benchmarks.

GLM-OCR is an efficient 0.9B-parameter compact multimodal model designed for real-world document understanding. It combines a 0.4B-parameter CogViT visual encoder with a 0.5B-parameter GLM language decoder, achieving a strong balance between computational efficiency and recognition performance. To address the inefficiency of standard autoregressive decoding in deterministic OCR tasks, GLM-OCR introduces a Multi-Token Prediction (MTP) mechanism that predicts multiple tokens per step, significantly improving decoding throughput while keeping memory overhead low through shared parameters. At the system level, a two-stage pipeline is adopted: PP-DocLayout-V3 first performs layout analysis, followed by parallel region-level recognition. Extensive evaluations on public benchmarks and industrial scenarios show that GLM-OCR achieves competitive or state-of-the-art performance in document parsing, text and formula transcription, table structure recovery, and key information extraction. Its compact architecture and structured generation make it suitable for both resource-constrained edge deployment and large-scale production systems.

Speech-language models (SLMs) offer a promising path toward unifying speech and text understanding and generation. However, challenges remain in achieving effective cross-modal alignment and high-quality speech generation. In this work, we systematically investigate the role of speech tokenizer designs in LLM-centric SLMs, augmented by speech heads and speaker modeling. We compare coupled, semi-decoupled, and fully decoupled speech tokenizers under a fair SLM framework and find that decoupled tokenization significantly improves alignment and synthesis quality. To address the information density mismatch between speech and text, we introduce multi-token prediction (MTP) into SLMs, enabling each hidden state to decode multiple speech tokens. This leads to up to 12times faster decoding and a substantial drop in word error rate (from 6.07 to 3.01). Furthermore, we propose a speaker-aware generation paradigm and introduce RoleTriviaQA, a large-scale role-playing knowledge QA benchmark with diverse speaker identities. Experiments demonstrate that our methods enhance both knowledge understanding and speaker consistency.

Models of sign language have historically lagged behind those for spoken language (text and speech). Recent work has greatly improved their performance on tasks like sign language translation and isolated sign recognition. However, it remains unclear to what extent existing models capture various linguistic phenomena of sign language, and how well they use cues from the multiple articulators used in sign language (hands, upper body, face). We introduce a new benchmark dataset for American Sign Language, ASL Minimal Translation Pairs (ASL-MTP), divided into multiple types of sign language phenomena and corresponding minimal pairs of translations, for performing such linguistic analyses. As a case study, we use ASL-MTP to analyze a state-of-the-art ASL-to-English translation model. We conduct a targeted analysis of the model by ablating various input cues during training and inference and evaluating on the phenomena in ASL-MTP. Our results show that, while the model performs above chance level on most of the phenomena, it relies strongly on manual cues while often missing crucial non-manual cues.

We introduce Step 3.5 Flash, a sparse Mixture-of-Experts (MoE) model that bridges frontier-level agentic intelligence and computational efficiency. We focus on what matters most when building agents: sharp reasoning and fast, reliable execution. Step 3.5 Flash pairs a 196B-parameter foundation with 11B active parameters for efficient inference. It is optimized with interleaved 3:1 sliding-window/full attention and Multi-Token Prediction (MTP-3) to reduce the latency and cost of multi-round agentic interactions. To reach frontier-level intelligence, we design a scalable reinforcement learning framework that combines verifiable signals with preference feedback, while remaining stable under large-scale off-policy training, enabling consistent self-improvement across mathematics, code, and tool use. Step 3.5 Flash demonstrates strong performance across agent, coding, and math tasks, achieving 85.4% on IMO-AnswerBench, 86.4% on LiveCodeBench-v6 (2024.08-2025.05), 88.2% on tau2-Bench, 69.0% on BrowseComp (with context management), and 51.0% on Terminal-Bench 2.0, comparable to frontier models such as GPT-5.2 xHigh and Gemini 3.0 Pro. By redefining the efficiency frontier, Step 3.5 Flash provides a high-density foundation for deploying sophisticated agents in real-world industrial environments.

We introduce the Nemotron 3 family of models - Nano, Super, and Ultra. These models deliver strong agentic, reasoning, and conversational capabilities. The Nemotron 3 family uses a Mixture-of-Experts hybrid Mamba-Transformer architecture to provide best-in-class throughput and context lengths of up to 1M tokens. Super and Ultra models are trained with NVFP4 and incorporate LatentMoE, a novel approach that improves model quality. The two larger models also include MTP layers for faster text generation. All Nemotron 3 models are post-trained using multi-environment reinforcement learning enabling reasoning, multi-step tool use, and support granular reasoning budget control. Nano, the smallest model, outperforms comparable models in accuracy while remaining extremely cost-efficient for inference. Super is optimized for collaborative agents and high-volume workloads such as IT ticket automation. Ultra, the largest model, provides state-of-the-art accuracy and reasoning performance. Nano is released together with its technical report and this white paper, while Super and Ultra will follow in the coming months. We will openly release the model weights, pre- and post-training software, recipes, and all data for which we hold redistribution rights.

Long Chain-of-Thought (CoT) reasoning improves LLM problem-solving but is computationally expensive due to sequential token generation. While recent works explore reasoning in continuous latent spaces to bypass discrete token generation, they often struggle with training stability and fail to scale to complex, long-horizon tasks due to lack of supervision signal. We propose SuperThoughts, which compresses pairs of consecutive CoT tokens into single latent representations and decodes two tokens per step via a lightweight Multi-Token Prediction (MTP) module. This preserves discrete token supervision at training time while doubling throughput at inference time. We finetune Qwen2.5-Math-1.5B-Instruct, Qwen2.5-Math-7B-Instruct, Qwen2.5-Math-14B-Instruct, and evaluate on MATH500, AMC, OlympiadBench, and GPQA-Diamond. With a confidence-based adaptive mechanism that falls back to standard decoding when uncertain, SuperThoughts achieves sim20--30\% CoT length reduction while maintaining accuracy with minimal degradation (1-2 points accuracy drop on most tasks).

We introduce JoyAI-LLM Flash, an efficient Mixture-of-Experts (MoE) language model designed to redefine the trade-off between strong performance and token efficiency in the sub-50B parameter regime. JoyAI-LLM Flash is pretrained on a massive corpus of 20 trillion tokens and further optimized through a rigorous post-training pipeline, including supervised fine-tuning (SFT), Direct Preference Optimization (DPO), and large-scale reinforcement learning (RL) across diverse environments. To improve token efficiency, JoyAI-LLM Flash strategically balances thinking and non-thinking cognitive modes and introduces FiberPO, a novel RL algorithm inspired by fibration theory that decomposes trust-region maintenance into global and local components, providing unified multi-scale stability control for LLM policy optimization. To enhance architectural sparsity, the model comprises 48B total parameters while activating only 2.7B parameters per forward pass, achieving a substantially higher sparsity ratio than contemporary industry leading models of comparable scale. To further improve inference throughput, we adopt a joint training-inference co-design that incorporates dense Multi-Token Prediction (MTP) and Quantization-Aware Training (QAT). We release the checkpoints for both JoyAI-LLM-48B-A3B Base and its post-trained variants on Hugging Face to support the open-source community.

We introduce Ling 2.0, a series reasoning-oriented language foundation built upon the principle that every activation boosts reasoning capability. Designed to scale from tens of billions to one trillion parameters under a unified Mixture-of-Experts (MoE) paradigm, Ling 2.0 emphasizes high sparsity, cross-scale consistency, and efficiency guided by empirical scaling laws. The series includes three non-thinking (instruct) models - Ling-mini-2.0, Ling-flash-2.0, and Ling-1T - ranging from 16B to 1T total parameters and achieving up to 7-fold active-compute efficiency compared with dense counterparts. Ling 2.0 integrates coordinated innovations across model architecture, pre-training, post-training, and infrastructure: a high-sparsity MoE with MTP for efficient reasoning, reasoning-oriented data and mid-training CoT activation, reinforcement-based fine-tuning (DFT, Evo-CoT), and full-scale FP8 training with fine-grained heterogeneous pipelines. At the trillion scale, Ling-1T establishes a new Pareto frontier of reasoning accuracy versus computational efficiency, demonstrating that sparse activation, when properly aligned with reasoning objectives, enables scalable and efficient intelligence. Collectively, Ling 2.0 provides a coherent, open, and efficient foundation for advancing future reasoning and thinking models, including the Ring series built upon the same base.

We describe the pre-training, post-training, and quantization of Nemotron 3 Super, a 120 billion (active 12 billion) parameter hybrid Mamba-Attention Mixture-of-Experts model. Nemotron 3 Super is the first model in the Nemotron 3 family to 1) be pre-trained in NVFP4, 2) leverage LatentMoE, a new Mixture-of-Experts architecture that optimizes for both accuracy per FLOP and accuracy per parameter, and 3) include MTP layers for inference acceleration through native speculative decoding. We pre-trained Nemotron 3 Super on 25 trillion tokens followed by post-training using supervised fine tuning (SFT) and reinforcement learning (RL). The final model supports up to 1M context length and achieves comparable accuracy on common benchmarks, while also achieving up to 2.2x and 7.5x higher inference throughput compared to GPT-OSS-120B and Qwen3.5-122B, respectively. Nemotron 3 Super datasets, along with the base, post-trained, and quantized checkpoints, are open-sourced on HuggingFace.

We introduce Nemotron 3 Ultra, a 550 billion total and 55 billion active parameter Mixture-of-Experts Hybrid Mamba-Attention language model. We pre-trained Nemotron 3 Ultra on 20 trillion text tokens, then extended the context length to 1M tokens, and post-trained using Supervised Fine Tuning (SFT), Reinforcement Learning (RL), and Multi-teacher On-Policy Distillation (MOPD). Nemotron 3 Ultra is our most capable model yet, employing multiple key technologies - LatentMoE, Multi Token Prediction (MTP), NVFP4 pre-training, multi-environment RLVR, MOPD, and reasoning budget control. Nemotron 3 Ultra achieves up to ~6x higher inference throughput as compared to state-of-the-art publicly available LLMs while attaining on-par accuracy. The state-of-the-art accuracy, high inference throughput, and 1M token context length make Nemotron 3 Ultra ideal for long-running autonomous agentic tasks. We open-source the base, post-trained, and quantized checkpoints, along with the training data and recipe on HuggingFace.

We introduce C-Pack, a package of resources that significantly advance the field of general Chinese embeddings. C-Pack includes three critical resources. 1) C-MTEB is a comprehensive benchmark for Chinese text embeddings covering 6 tasks and 35 datasets. 2) C-MTP is a massive text embedding dataset curated from labeled and unlabeled Chinese corpora for training embedding models. 3) C-TEM is a family of embedding models covering multiple sizes. Our models outperform all prior Chinese text embeddings on C-MTEB by up to +10% upon the time of the release. We also integrate and optimize the entire suite of training methods for C-TEM. Along with our resources on general Chinese embedding, we release our data and models for English text embeddings. The English models achieve state-of-the-art performance on MTEB benchmark; meanwhile, our released English data is 2 times larger than the Chinese data. All these resources are made publicly available at https://github.com/FlagOpen/FlagEmbedding.

We systematically investigate multi-token prediction (MTP) capabilities within LLMs pre-trained for next-token prediction (NTP). We first show that such models inherently possess MTP capabilities via numerical marginalization over intermediate token probabilities, though performance is data-dependent and improves with model scale. Furthermore, we explore the challenges of integrating MTP heads into frozen LLMs and find that their hidden layers are strongly specialized for NTP, making adaptation non-trivial. Finally, we show that while joint training of MTP heads with the backbone improves performance, it cannot fully overcome this barrier, prompting further research in this direction. Our findings provide a deeper understanding of MTP applied to pretrained LLMs, informing strategies for accelerating inference through parallel token prediction.

Extending Large Language Models (LLMs) to advanced applications requires reliable structured output generation. Existing methods which often rely on rigid JSON schemas, can lead to unreliable outputs, diminished reasoning capabilities, and increased computational overhead, limiting LLMs' adaptability for complex tasks. We introduce Meaning Typed Prompting (MTP), a technique for efficient structured output generation that integrates types, meanings, and abstractions, such as variables and classes, into the prompting process. By utilizing expressive type definitions, MTP enhances output clarity and reduces dependence on complex abstractions, simplifying development, and improving implementation efficiency. This enables LLMs to understand relationships and generate structured data more effectively. Empirical evaluations on multiple benchmarks demonstrate that MTP outperforms existing frameworks in accuracy, reliability, consistency, and token efficiency. We present Semantix, a framework that implements MTP, providing practical insights into its application.

Multi-Token Prediction (MTP) has been proposed as an auxiliary objective to improve next-token prediction (NTP) in language model training but shows inconsistent improvements, underperforming in standard NLP benchmarks. We argue that MTP's exact future token prediction is too difficult as an auxiliary loss. Instead, we propose Token Order Prediction (TOP), which trains models to order upcoming tokens by their proximity using a learning-to-rank loss. TOP requires only a single additional unembedding layer compared to MTP's multiple transformer layers. We pretrain models of 340M, 1.8B, and 7B parameters using NTP, MTP, and TOP objectives. Results on eight standard NLP benchmarks show that TOP overall outperforms both NTP and MTP even at scale. Our code is available at https://github.com/zaydzuhri/token-order-prediction

Speech large language models (LLMs) have emerged as a prominent research focus in speech processing. We propose VocalNet-1B and VocalNet-8B, a series of high-performance, low-latency speech LLMs enabled by a scalable and model-agnostic training framework for real-time voice interaction. Departing from the conventional next-token prediction (NTP), we introduce multi-token prediction (MTP), a novel approach optimized for speech LLMs that simultaneously improves generation speed and quality. Experiments show that VocalNet outperforms mainstream Omni LLMs despite using significantly less training data, while also surpassing existing open-source speech LLMs by a substantial margin. To support reproducibility and community advancement, we will open-source all model weights, inference code, training data, and framework implementations upon publication.

Continuous Chain-of-Thought methods replace verbose reasoning traces with a short sequence of dense latent representations. Earlier continuous CoT methods indirectly supervise the latent representations such that its final state match that of verbose reasoning traces, requiring autoregressive, slow generation during training. We introduce C-MTP, a simpler, faster direct supervision approach that models each latent as an average of the embeddings in the CoT traces to be compressed. Our approach outperforms a prior direct supervision method that approximates the distribution of compressed tokens, and performs competitively to slower indirect supervision approaches in existing evaluation setup with simplified CoT traces (less than 100 tokens). Lastly, we extend the evaluation of Continuous CoT methods to complex tasks with longer reasoning traces (ge few hundreds reasoning tokens). We find both direct and indirect supervision training methods perform poorly (roughly 65\% performance drop) in this setting, revealing the limitations of current continuous CoT methods. The code and checkpoints are released at https://github.com/Varun221/cmtp_research

Multi-Token Prediction (MTP) has emerged as an effective paradigm that augments a shared Large Language Model backbone with auxiliary heads, training the model to predict several future tokens in parallel to enrich its supervision signal and accelerate inference. However, existing training frameworks adopt a rigid, fixed-length prediction horizon, disregarding the highly non-uniform information density of natural language and code. Forcing the auxiliary heads to predict across high-entropy semantic boundaries injects noisy, conflicting training signals; because these heads share the backbone's latent representations, the resulting gradients backpropagate and interfere with the model's core capabilities. We propose AdaMTP, an adaptive training paradigm that dynamically aligns the prediction horizon with the intrinsic predictability of the sequence. At its core, an entropy-based segmentation algorithm leverages the base model to detect sudden surges in uncertainty as semantic boundaries, partitioning sequences into variable-length groups. Each token is assigned an adaptive prediction depth, and a dynamically masked MTP objective suppresses the loss for predictions that cross these boundaries, attenuating the noisy gradients that degrade the backbone. Across mathematical reasoning, code generation, and general benchmarks on three backbones (Llama-3.1-8B, Qwen-2.5-7B, Gemma-3-12B), AdaMTP consistently outperforms standard MTP in both task performance and inference speedup.

Long chain-of-thought reasoning has made autoregressive decoding the dominant inference cost of modern large language models. Existing methods target either the input side (latent compression) or the output side (speculative decoding and multi-token prediction, MTP), but the two lines of work have been pursued independently. Moreover, output-side methods must incur an expensive verifier pass to validate the unreliable draft tokens predicted by MTP. To address these issues, we propose Pair-In, Pair-Out (PIPO), which unifies both sides by viewing a latent compressor and an MTP head as mirror-image operations: the compressor folds two input tokens into one latent representation, while the MTP head unfolds one hidden state into one additional output token. To remove the verifier cost without sacrificing reliability, PIPO trains a lightweight confidence head that decides whether draft tokens should be accepted. We observe that On-Policy Distillation (OPD) naturally matches the rejection-sampling criterion of speculative decoding, so the confidence head can be trained alongside OPD with negligible extra cost. Experiments on AIME 2025, GPQA-Diamond, LiveCodeBench v6, and LongBench v2 with Qwen3.5-4B and 9B backbones show that PIPO improves pass@4 over regular decoding by up to +7.15 points, while delivering up to 2.64times first-token-latency and 2.07times per-token-latency speedups. Project Page: GitHub.com/RedAI-Infra/PIPO.

The scarcity of large-scale robotic data has motivated the repurposing of foundation models from other modalities for policy learning. In this work, we introduce PhysGen (Learning Physics from Pretrained Video Generation Models), a scalable continuous and sequential world interaction framework that leverages autoregressive video generation to solve robotic manipulation tasks. By treating the pretrained video model as a proxy for a physics simulator, PhysGen models the dynamic interplay between the external environment and robot actions. We introduce a multimodal continuous representation that unifies video and action into shared physical tokens, bridging the gap between discrete video generation and continuous robotic control. This approach enables the seamless transfer of implicit physical knowledge-such as object permanence and dynamics-from video pretraining to downstream manipulation.To ensure efficient convergence, we incorporate causal masking, inverse kinematics, Lookahead Multi-Token Prediction (L-MTP), and key-value (KV) caching. Experimental results on the Libero and ManiSkill benchmarks demonstrate that PhysGen consistently outperforms robust baselines, surpassing OpenVLA and WorldVLA by margins of 13.8% and 8.8%, respectively. Notably, in real-world scenarios, PhysGen matches the performance of large-scale action-pretrained models like π_0 without requiring prior action-specific pretraining, demonstrating superior capability in physically complex tasks such as grasping transparent objects. These findings validate the potential of extracting physical intuition from pretrained video generators to facilitate generalizable robotic manipulation.

The landscape of joint audio and video generation has been fundamentally transformed by the advent of powerful foundation models. Despite these strides, achieving cohesive multimodal customization for the simultaneous preservation of visual identities and vocal timbres across multiple interacting subjects remains largely underexplored. To bridge this gap, we present Omni-Customizer, an end-to-end framework targeted at the precise binding and seamless fusion of multimodal identity information. Specifically, we introduce an Omni-Context Fusion (OCF) module that effectively enriches the base textual prompt with dense, multimodal identity cues, along with a Masked TTS Cross-Attention (MTP-CA) mechanism explicitly designed to prevent the severe "speech leakage" problem. Within this architecture, we propose Semantic-Anchored Multimodal RoPE (SA-MRoPE) to anchor visual and audio reference tokens, along with TTS embeddings, to their corresponding semantic descriptions, enabling structured multimodal fusion and robust identity binding. Furthermore, we devise a comprehensive training strategy that incorporates interleaved audio-video scheduling to rapidly adapt the audio branch to multilingual scenarios without degrading foundational priors, and a progressive in-pair to cross-pair curriculum to facilitate the learning of high-level and robust identity features. Extensive experiments demonstrate that Omni-Customizer achieves state-of-the-art performance in dual-modal customized generation, excelling across visual identity similarity, timbre consistency, precise audio-video synchronization, and overall video-audio fidelity.