Daily Papers

We present LongLive, a frame-level autoregressive (AR) framework for real-time and interactive long video generation. Long video generation presents challenges in both efficiency and quality. Diffusion and Diffusion-Forcing models can produce high-quality videos but suffer from low efficiency due to bidirectional attention. Causal attention AR models support KV caching for faster inference, but often degrade in quality on long videos due to memory challenges during long-video training. In addition, beyond static prompt-based generation, interactive capabilities, such as streaming prompt inputs, are critical for dynamic content creation, enabling users to guide narratives in real time. This interactive requirement significantly increases complexity, especially in ensuring visual consistency and semantic coherence during prompt transitions. To address these challenges, LongLive adopts a causal, frame-level AR design that integrates a KV-recache mechanism that refreshes cached states with new prompts for smooth, adherent switches; streaming long tuning to enable long video training and to align training and inference (train-long-test-long); and short window attention paired with a frame-level attention sink, shorten as frame sink, preserving long-range consistency while enabling faster generation. With these key designs, LongLive fine-tunes a 1.3B-parameter short-clip model to minute-long generation in just 32 GPU-days. At inference, LongLive sustains 20.7 FPS on a single NVIDIA H100, achieves strong performance on VBench in both short and long videos. LongLive supports up to 240-second videos on a single H100 GPU. LongLive further supports INT8-quantized inference with only marginal quality loss.

Reinforcement Learning with Human Feedback (RLHF) and Reinforcement Learning with Verifiable Rewards (RLVR) are the main RL paradigms used in LLM post-training, each offering distinct advantages. However, RLHF struggles with interpretability and reward hacking because it relies on human judgments that usually lack explicit criteria, whereas RLVR is limited in scope by its focus on correctness-based verifiers. We propose Reinforcement Learning with Binary Flexible Feedback (RLBFF), which combines the versatility of human-driven preferences with the precision of rule-based verification, enabling reward models to capture nuanced aspects of response quality beyond mere correctness. RLBFF extracts principles that can be answered in a binary fashion (e.g. accuracy of information: yes, or code readability: no) from natural language feedback. Such principles can then be used to ground Reward Model training as an entailment task (response satisfies or does not satisfy an arbitrary principle). We show that Reward Models trained in this manner can outperform Bradley-Terry models when matched for data and achieve top performance on RM-Bench (86.2%) and JudgeBench (81.4%, #1 on leaderboard as of September 24, 2025). Additionally, users can specify principles of interest at inference time to customize the focus of our reward models, in contrast to Bradley-Terry models. Finally, we present a fully open source recipe (including data) to align Qwen3-32B using RLBFF and our Reward Model, to match or exceed the performance of o3-mini and DeepSeek R1 on general alignment benchmarks of MT-Bench, WildBench, and Arena Hard v2 (at <5% of the inference cost).

We introduce SANA-Video, a small diffusion model that can efficiently generate videos up to 720x1280 resolution and minute-length duration. SANA-Video synthesizes high-resolution, high-quality and long videos with strong text-video alignment at a remarkably fast speed, deployable on RTX 5090 GPU. Two core designs ensure our efficient, effective and long video generation: (1) Linear DiT: We leverage linear attention as the core operation, which is more efficient than vanilla attention given the large number of tokens processed in video generation. (2) Constant-Memory KV cache for Block Linear Attention: we design block-wise autoregressive approach for long video generation by employing a constant-memory state, derived from the cumulative properties of linear attention. This KV cache provides the Linear DiT with global context at a fixed memory cost, eliminating the need for a traditional KV cache and enabling efficient, minute-long video generation. In addition, we explore effective data filters and model training strategies, narrowing the training cost to 12 days on 64 H100 GPUs, which is only 1% of the cost of MovieGen. Given its low cost, SANA-Video achieves competitive performance compared to modern state-of-the-art small diffusion models (e.g., Wan 2.1-1.3B and SkyReel-V2-1.3B) while being 16x faster in measured latency. Moreover, SANA-Video can be deployed on RTX 5090 GPUs with NVFP4 precision, accelerating the inference speed of generating a 5-second 720p video from 71s to 29s (2.4x speedup). In summary, SANA-Video enables low-cost, high-quality video generation.

Large Language Models (LLMs) today are powerful problem solvers across many domains, and they continue to get stronger as they scale in model size, training set size, and training set quality, as shown by extensive research and experimentation across the industry. Training a frontier model today requires on the order of tens to hundreds of yottaflops, which is a massive investment of time, compute, and energy. Improving pretraining efficiency is therefore essential to enable the next generation of even more capable LLMs. While 8-bit floating point (FP8) training is now widely adopted, transitioning to even narrower precision, such as 4-bit floating point (FP4), could unlock additional improvements in computational speed and resource utilization. However, quantization at this level poses challenges to training stability, convergence, and implementation, notably for large-scale models trained on long token horizons. In this study, we introduce a novel approach for stable and accurate training of large language models (LLMs) using the NVFP4 format. Our method integrates Random Hadamard transforms (RHT) to bound block-level outliers, employs a two-dimensional quantization scheme for consistent representations across both the forward and backward passes, utilizes stochastic rounding for unbiased gradient estimation, and incorporates selective high-precision layers. We validate our approach by training a 12-billion-parameter model on 10 trillion tokens -- the longest publicly documented training run in 4-bit precision to date. Our results show that the model trained with our NVFP4-based pretraining technique achieves training loss and downstream task accuracies comparable to an FP8 baseline. These findings highlight that NVFP4, when combined with our training approach, represents a major step forward in narrow-precision LLM training algorithms.

Existing text-to-image diffusion models excel at generating high-quality images, but face significant efficiency challenges when scaled to high resolutions, like 4K image generation. While previous research accelerates diffusion models in various aspects, it seldom handles the inherent redundancy within the latent space. To bridge this gap, this paper introduces DC-Gen, a general framework that accelerates text-to-image diffusion models by leveraging a deeply compressed latent space. Rather than a costly training-from-scratch approach, DC-Gen uses an efficient post-training pipeline to preserve the quality of the base model. A key challenge in this paradigm is the representation gap between the base model's latent space and a deeply compressed latent space, which can lead to instability during direct fine-tuning. To overcome this, DC-Gen first bridges the representation gap with a lightweight embedding alignment training. Once the latent embeddings are aligned, only a small amount of LoRA fine-tuning is needed to unlock the base model's inherent generation quality. We verify DC-Gen's effectiveness on SANA and FLUX.1-Krea. The resulting DC-Gen-SANA and DC-Gen-FLUX models achieve quality comparable to their base models but with a significant speedup. Specifically, DC-Gen-FLUX reduces the latency of 4K image generation by 53x on the NVIDIA H100 GPU. When combined with NVFP4 SVDQuant, DC-Gen-FLUX generates a 4K image in just 3.5 seconds on a single NVIDIA 5090 GPU, achieving a total latency reduction of 138x compared to the base FLUX.1-Krea model. Code: https://github.com/dc-ai-projects/DC-Gen.

We introduce DC-VideoGen, a post-training acceleration framework for efficient video generation. DC-VideoGen can be applied to any pre-trained video diffusion model, improving efficiency by adapting it to a deep compression latent space with lightweight fine-tuning. The framework builds on two key innovations: (i) a Deep Compression Video Autoencoder with a novel chunk-causal temporal design that achieves 32x/64x spatial and 4x temporal compression while preserving reconstruction quality and generalization to longer videos; and (ii) AE-Adapt-V, a robust adaptation strategy that enables rapid and stable transfer of pre-trained models into the new latent space. Adapting the pre-trained Wan-2.1-14B model with DC-VideoGen requires only 10 GPU days on the NVIDIA H100 GPU. The accelerated models achieve up to 14.8x lower inference latency than their base counterparts without compromising quality, and further enable 2160x3840 video generation on a single GPU. Code: https://github.com/dc-ai-projects/DC-VideoGen.

Reinforcement Learning with Verifiable Rewards (RLVR) has emerged as a key ingredient for unlocking complex reasoning capabilities in large language models. Recent work ProRL has shown promise in scaling RL by increasing the number of training steps. However, performance plateaus after thousands of steps, with clear diminishing returns from allocating more computation to additional training. In this work, we investigate a complementary paradigm for scaling RL, BroR-Lincreasing the number of rollouts per example to hundreds to exhaustively Broaden exploration, which yields continuous performance gains beyond the saturation point observed in ProRL when scaling the number of training steps. Our approach is motivated by a mass balance equation analysis allowing us to characterize the rate of change in probability mass for correct and incorrect tokens during the reinforcement process. We show that under a one-step RL assumption, sampled rollout tokens always contribute to correct-mass expansion, while unsampled tokens outside rollouts may lead to gains or losses depending on their distribution and the net reward balance. Importantly, as the number of rollouts per example N increases, the effect of unsampled terms diminishes, ensuring overall correct-mass expansion. To validate our theoretical analysis, we conduct simulations under more relaxed conditions and find that a sufficiently large rollout size N-corresponding to ample exploration-guarantees an increase in the probability mass of all correct tokens. Empirically, BroRL revives models saturated after 3K ProRL training steps and demonstrates robust, continuous improvement, achieving state-of-the-art results for the 1.5B model across diverse benchmarks.

The dominant paradigm for training large reasoning models starts with pre-training using next-token prediction loss on vast amounts of data. Reinforcement learning, while powerful in scaling reasoning, is introduced only as the very last phase of post-training, preceded by supervised fine-tuning. While dominant, is this an optimal way of training? In this paper, we present RLP, an information-driven reinforcement pretraining objective, that brings the core spirit of reinforcement learning -- exploration -- to the last phase of pretraining. The key idea is to treat chain-of-thought as an exploratory action, with rewards computed based on the information gain it provides for predicting future tokens. This training objective essentially encourages the model to think for itself before predicting what comes next, thus teaching an independent thinking behavior earlier in the pretraining. More concretely, the reward signal measures the increase in log-likelihood of the next token when conditioning on both context and a sampled reasoning chain, compared to conditioning on context alone. This approach yields a verifier-free dense reward signal, allowing for efficient training for the full document stream during pretraining. Specifically, RLP reframes reinforcement learning for reasoning as a pretraining objective on ordinary text, bridging the gap between next-token prediction and the emergence of useful chain-of-thought reasoning. Pretraining with RLP on Qwen3-1.7B-Base lifts the overall average across an eight-benchmark math-and-science suite by 19%. With identical post-training, the gains compound, with the largest improvements on reasoning-heavy tasks such as AIME25 and MMLU-Pro. Applying RLP to the hybrid Nemotron-Nano-12B-v2 increases the overall average from 42.81% to 61.32% and raises the average on scientific reasoning by 23%, demonstrating scalability across architectures and model sizes.

Autoregressive (AR) large language models (LLMs) have achieved remarkable performance across a wide range of natural language tasks, yet their inherent sequential decoding limits inference efficiency. In this work, we propose Fast-dLLM v2, a carefully designed block diffusion language model (dLLM) that efficiently adapts pretrained AR models into dLLMs for parallel text generation, requiring only approximately 1B tokens of fine-tuning. This represents a 500x reduction in training data compared to full-attention diffusion LLMs such as Dream (580B tokens), while preserving the original model's performance. Our approach introduces a novel training recipe that combines a block diffusion mechanism with a complementary attention mask, enabling blockwise bidirectional context modeling without sacrificing AR training objectives. To further accelerate decoding, we design a hierarchical caching mechanism: a block-level cache that stores historical context representations across blocks, and a sub-block cache that enables efficient parallel generation within partially decoded blocks. Coupled with our parallel decoding pipeline, Fast-dLLM v2 achieves up to 2.5x speedup over standard AR decoding without compromising generation quality. Extensive experiments across diverse benchmarks demonstrate that Fast-dLLM v2 matches or surpasses AR baselines in accuracy, while delivering state-of-the-art efficiency among dLLMs - marking a significant step toward the practical deployment of fast and accurate LLMs. Code and model will be publicly released.

The prevailing paradigm for enhancing the reasoning abilities of LLMs revolves around post-training on high-quality, reasoning-intensive data. While emerging literature suggests that reasoning data is increasingly incorporated also during the mid-training stage-a practice that is relatively more proprietary and less openly characterized-the role of such data in pretraining remains unclear. In particular, due to the opaqueness of pretraining corpora in most frontier models, the effect of reasoning data introduced at different phases of pre- and/or post-training is relatively less reported in the scientific literature. This raises several important questions: Is adding reasoning data earlier during pretraining any better than introducing it during post-training? Could earlier inclusion risk overfitting and harm generalization, or instead establish durable foundations that later fine-tuning cannot recover? We conduct the first systematic study of how reasoning data-varying in scale, diversity, and quality-affects LLM performance when introduced at different stages of training. We find that front-loading reasoning data into pretraining is critical (19% avg gain), establishing foundational capabilities that cannot be fully replicated by later-stage SFT, even with more data. We uncover an asymmetric principle for optimal data allocation: pretraining benefits most from broad diversity in reasoning patterns (11% avg gain), while SFT is more sensitive to data quality (15% avg gain). We show that high-quality pretraining data has latent effects, activated only after SFT, and that naively scaling SFT data can be detrimental, washing away the benefits of early reasoning injection. Our results challenge the conventional separation of language modeling and reasoning, providing a principled guide for strategically allocating data across the entire training pipeline to build more capable models.

Recent advances in large generative models have significantly advanced image editing and in-context image generation, yet a critical gap remains in ensuring physical consistency, where edited objects must remain coherent. This capability is especially vital for world simulation related tasks. In this paper, we present ChronoEdit, a framework that reframes image editing as a video generation problem. First, ChronoEdit treats the input and edited images as the first and last frames of a video, allowing it to leverage large pretrained video generative models that capture not only object appearance but also the implicit physics of motion and interaction through learned temporal consistency. Second, ChronoEdit introduces a temporal reasoning stage that explicitly performs editing at inference time. Under this setting, the target frame is jointly denoised with reasoning tokens to imagine a plausible editing trajectory that constrains the solution space to physically viable transformations. The reasoning tokens are then dropped after a few steps to avoid the high computational cost of rendering a full video. To validate ChronoEdit, we introduce PBench-Edit, a new benchmark of image-prompt pairs for contexts that require physical consistency, and demonstrate that ChronoEdit surpasses state-of-the-art baselines in both visual fidelity and physical plausibility. Code and models for both the 14B and 2B variants of ChronoEdit will be released on the project page: https://research.nvidia.com/labs/toronto-ai/chronoedit

Reinforcement learning (RL) is essential for enhancing the complex reasoning capabilities of large language models (LLMs). However, existing RL training pipelines are computationally inefficient and resource-intensive, with the rollout phase accounting for over 70% of total training time. Quantized RL training, particularly using FP8 precision, offers a promising approach to mitigating this bottleneck. A commonly adopted strategy applies FP8 precision during rollout while retaining BF16 precision for training. In this work, we present the first comprehensive study of FP8 RL training and demonstrate that the widely used BF16-training + FP8-rollout strategy suffers from severe training instability and catastrophic accuracy collapse under long-horizon rollouts and challenging tasks. Our analysis shows that these failures stem from the off-policy nature of the approach, which introduces substantial numerical mismatch between training and inference. Motivated by these observations, we propose Jet-RL, an FP8 RL training framework that enables robust and stable RL optimization. The key idea is to adopt a unified FP8 precision flow for both training and rollout, thereby minimizing numerical discrepancies and eliminating the need for inefficient inter-step calibration. Extensive experiments validate the effectiveness of Jet-RL: our method achieves up to 33% speedup in the rollout phase, up to 41% speedup in the training phase, and a 16% end-to-end speedup over BF16 training, while maintaining stable convergence across all settings and incurring negligible accuracy degradation.

Current mobile GUI agent benchmarks systematically fail to assess memory capabilities, with only 5.2-11.8% memory-related tasks and no cross-session learning evaluation. We introduce MemGUI-Bench, a comprehensive memory-centric benchmark with pass@k and staged LLM-as-judge evaluation. Our contributions include: (1) a systematic memory taxonomy analyzing 11 agents across 5 architectures; (2) 128 tasks across 26 applications where 89.8% challenge memory through cross-temporal and cross-spatial retention; (3) MemGUI-Eval, an automated pipeline with Progressive Scrutiny and 7 hierarchical metrics; and (4) RQ-driven assessment of 11 state-of-the-art agents. Our experiments reveal significant memory deficits across all evaluated systems, identify 5 distinct failure modes, and synthesize 5 actionable design implications. All resources including code, benchmark, and evaluation results will be \textit{fully open-sourced and continuously maintained} at https://lgy0404.github.io/MemGUI-Bench/.

We study visual persistence in interactive video world models. These models rely on a Key-Value (KV) cache as a growing visual memory to carry forward previously generated frames. However, we find that models can no longer reliably address stored content once rollouts extend beyond the training horizon, because temporal Rotary Positional Embeddings (RoPE) offsets then fall outside the range seen during training and the model struggles to retrieve the relevant visual information through attention. Moreover, naively compressing the cache in the RoPE-rotated space corrupts memory by averaging together incompatible positional phases. To address this, we propose WorldTrace, a training-free memory framework for long-horizon visual persistence. WorldTrace keeps compressed memory addressable by assigning each summary slot a distinct, in-distribution virtual position. Within this addressable cache, we study two memory compression approaches: WorldTrace-Field compresses history for temporal coherence, while WorldTrace-Landmark stores verbatim scene traces at detected transitions for episodic recall. We further introduce LoopBench, a benchmark evaluating whether a compressed cache can reconstruct a previously visited scene after a long detour. WorldTrace-Field improves temporal consistency by +15.5%, and WorldTrace-Landmark improves episodic recall by +19.5% on LoopBench, extending visually persistent generation without retraining.

Autonomous research loops such as AutoResearch show that one coding agent can improve a training setup unattended. Run several of them and each session starts from scratch, so more agents tend to mean more duplicated search rather than more discovery. Agora is a shared memory for such agents: research is recorded as an append-only directed acyclic graph (DAG) stored in Git, so that every claim is a commit anyone can check out and rerun. Each result, insight, hypothesis, verification, and report is an immutable commit whose parent edges say what it builds on; a derived index exposes the frontier, the neglected branches, and the verification status of each claim, and a diversity-aware selection rule keeps the community from collapsing onto one leader. We describe the system and report its first sustained use: a run of nearly 12 days in which 13 language-model workers, with no assigned tasks and no central planner, worked on a weight-transfer problem. Given 141 pretrained donor models and a frozen 119.6M-parameter attention-SSM hybrid whose dimensions match no donor, the workers had to initialize the target without training data or gradient updates. They published 1,703 contributions and drove the evaluator from 3.39 to 1.899 bits per byte, closing 62% of the gap to a trained GPT-2 124M. The winning recipe compresses donor next-token statistics into the target's embedding and output head, then adds a short-range context signal through sparse edits to attention, feed-forward, and state-space blocks. Its 145-commit ancestry spans 15 accounts, and 165 independent reproductions were posted, none of which failed. We describe the single mid-run human intervention that pulled the community out of a monoculture, what the trace does and does not establish, and the controlled comparison that would settle whether shared research state improves discovery per unit of compute.

As coding agents move from supervised code completion to unattended, around-the-clock exploration, their work expands from isolated predictions into long trajectories of reasoning, tool use, and feedback. Token efficiency therefore becomes important for scaling recursive self-improvement. We take an RSI-inspired approach at the harness layer, scaling auto-research loops across increasingly numerous and diverse environments for harness rollouts. At this scale, the process yields reusable improvements that transfer beyond their development setting, moving automated harness discovery toward production-level outcomes. Four mechanisms survive selection and form SoL-Pi, spanning action execution, context compaction, observation handling, and delegated reading. On the 51-task EdgeBench evaluation, SoL-Pi achieves performance comparable to Pi across GPT-5.6 Sol and Opus 5 while reducing recorded token traffic by 44.7-49.0% and API cost by about one third. In other words, estimated hourly savings are \8.75-13.50 relative to native Codex and Claude Code harnesses, and \4.36-5.71 relative to Pi.

Comparisons in video self-supervised learning often evaluate complete training recipes rather than isolating the method itself: architecture, objective, data exposure, schedule, scale, and decoder capacity can all vary at once. This makes it hard to identify which choices yield motion-prioritized representations, whose gains concentrate on frame-to-frame change while retaining useful appearance. We address this with a matched 4 times 6 = 24 architecture-objective study at roughly 170M ~ 190M encoder scale on sim1.7M OpenVid and Moments-in-Time v2 clips for 8 epochs, and propose TT-VidT. TT-VidT combines a DINOv3-initialized ViT-B/16 per-frame spatial path with a compact Temporal Transfer Layer, trained by Diff Compression to reconstruct target frames from a first-frame appearance anchor and frame-specific motion tokens. The sweep shows that TT3D with Diff Compression, not either component alone, enters the strongest motion-sensitive regime, and decoder ablations favor a compact video-pretrained decoder. In final comparison, TT-VidT leads Jester, Something-Something V2, ARID, and Diving48 fine-tuning simultaneously, improving over the strongest non-TT row by 54% ~ 121%, while using 48% fewer encoder FLOPs than DisMo and 55% fewer than VideoMAE or V-JEPA2. HMDB51, IARD, and EPIC-Kitchens bound the claim.

We study on-policy distillation (OPD) through the lens of reinforcement learning, establishing a connection between the reverse-KL objective in OPD and KL-regularized policy optimization. Building on this connection, we introduce Least-Square Policy Distillation (LSPD), an RL-inspired framework that brings optimistic exploration and off-policy data reuse from value-based RL into policy distillation. LSPD preserves policy diversity through exploration while improving rollout efficiency by repeatedly learning from previously collected trajectories. Our theoretical analysis connects LSPD to optimistic value-based learning and shows that its idealized formulation achieves a sharp mathcal O(log K) regret bound under online exploration. Empirically, LSPD consistently outperforms existing distillation baselines across six mathematical reasoning benchmarks and diverse teacher-student settings, with average gains of +1.59 points in Avg@16. Remarkably, through Pass@k evaluations up to k=64, we found that LSPD better preserves policy diversity by achieving stronger performance as k grows. Its fully off-policy variant achieves comparable performance to vanilla OPD using only the first 25% of rollout batches. Together, these results provide an RL perspective on OPD that offers both a principled interpretation and a practical route toward more effective and rollout-efficient language model distillation.

Group-relative methods for reinforcement learning with verifiable rewards (RLVR) learn from differences in rollout outcomes. Independently sampling complete trajectories is costly and does not explicitly explore the decision space at critical positions. Feedback on a completed trajectory can reveal which earlier choices the policy reconsiders, suggesting where to sample alternative continuations. We introduce Hindsight-Divergence Localization (HDL), which uses hindsight-induced changes in token log-likelihoods to select branch points. HDL generates a small number of complete root trajectories and fills each training group with continuations from the selected positions under the original task context. Each continuation reuses its root prefix and contributes policy updates only through its newly generated suffix, reducing generation cost while focusing additional exploration and learning on decisions after branching. Experiments with three models across math, code, and agent tasks show gains in both rollout efficiency and task performance. Compared with GRPO at matched group sizes and training steps, HDL yields up to a 2.5times reduction in generated tokens and a 1.8times speedup in rollout wall-clock time. Despite this reduced generation budget, HDL improves performance across all three domains, with gains of up to 12.5 points on agent tasks.

Video diffusion models are increasingly developed into specialized models for diverse downstream tasks, and this development often includes a distillation stage, for example to accelerate sampling or to improve long-video generation. This stage is typically repeated for every specialized model. We introduce LongLive-Plug, a once-for-all distillation framework that learns reusable capabilities as LoRAs on a base model for training-free, plug-and-play deployment to compatible downstream models. These capabilities include single-pass classifier-free guidance, few-step sampling, and long-context error correction for autoregressive generation. The adapters remain reusable even when downstream models add conditioning branches, expand output channels. Despite training at a fixed guidance scale, our dedicated CFG LoRA provides text guidance control through its inference weight. Combining it with a few-step LoRA simultaneously preserves few-step generation and CFG controllability on downstream tasks. We verify training-free deployment on 54 downstream models across three backbone families and eight task categories, including world modeling, robotics, editing, and multimodal generation. The approach may support additional compatible models. Each capability can thus be distilled once per backbone family and reused without per-target retraining.

Video world models are expected to predict how the physical world evolves, yet they often produce visually plausible videos that violate basic physical principles. Existing approaches commonly assume that natural language is insufficient to represent the physical knowledge required for reliable generation, and therefore introduce additional visual, latent, numerical, or planning-based signals. We revisit this assumption and introduce Physis-Lang, a self-evolving framework that treats physical language as a shared and optimizable representation across data curation, model training, and video generation. Physis-Lang represents physical processes through language that describes their relevant entities, causes, interactions, governing principles, temporal evolution, and effects. To improve this representation, we construct PhysCapBench, which decomposes physical processes into atomic assertions and evaluates captions using recall and precision. An agentic loop iteratively analyzes assertion-level errors and refines the instruction used to produce physical captions. Physis-Lang further converts model deficiencies into textual descriptions and uses language-guided retrieval to identify visually diverse videos that cover missing physical processes. Experiments on four widely used physical video benchmarks with Wan and Cosmos backbones demonstrate consistent improvements in physical plausibility. Notably, starting from open-source Cosmos3-Nano backbones, our Physis-Lang-enhanced models surpass the leading proprietary Veo 3.1 model.

On-policy distillation (OPD) is a promising approach for training language agents, providing dense teacher supervision on student-generated trajectories. However, in multi-turn interaction, an incorrect action changes the states the student encounters later, so errors compound across turns. In preliminary experiments across three Qwen3 models (8B to 235B), we find that more than half of the failed rollouts contain a pivotal mistake, an action that moves the agent farther from completing the task, and this mistake typically occurs early. These pivotal mistakes often remain recoverable: guiding the model for only a few turns after the pivotal turn can restore task success. We therefore propose PivotOPD, an on-policy distillation framework that jointly trains the student to prevent pivotal mistakes and to recover from the states they create. At each pivotal mistake, a teacher model provides a gold action and then names a recovery action at each of the next few turns. Preventive distillation uses the gold action with reverse KL to steer the student away from the pivotal mistake, while recovery distillation uses the recovery actions with forward KL to transfer recovery behaviors that the student rarely samples. Against 13 baselines on ALFWorld, WebShop, and Search-based QA, PivotOPD achieves the strongest average performance for both Qwen3-1.7B and Qwen3-8B students, improving over the strongest baseline on ALFWorld by +5.5% with the 1.7B student. The gains also transfer to another model family on the software engineering domain, where PivotOPD raises the resolve rate of a Nemotron-3.5 student on SWE-Bench Verified by +3.2%. Project page: https://research.nvidia.com/labs/lpr/pivotopd/

Terminal agents act through stochastic model generations, yet the ability to generate a useful action does not ensure its reliable execution. A poor command (e.g., wrong package install) can change the environment in ways that hinder subsequent progress, even when the model could generate a better alternative. We investigate whether allocating test-time compute at the model-harness boundary can improve action reliability and trajectory success, and what makes this allocation effective. To study these questions, we introduce Mid-Harness, which samples and verifies candidate actions before forwarding one for execution, while keeping the generator and harness unchanged. With a TMAX-9B generator, more action sampling yields little benefit under weak verification, whereas a capable verifier can exploit useful alternatives from the same generator. On TerminalBench-Lite, a GPT-5.6 Sol verifier raises Pass@1 from 50.00% for the base agent to 68.03% with 8 sampled actions. When the same TMAX-9B model serves as the verifier, pairwise verification performs best among the evaluated verification mechanisms. Distilling responses from the stronger verifier into TMAX-9B further improves Pass@1, while leaving the action generator unchanged. With TMAX-9B on TerminalBench-Lite, combining action and trajectory scaling reaches higher success at lower estimated token cost than generating more trajectories alone. Mid-Harness also improves performance across additional models, benchmarks, and harnesses. These findings identify action scaling as a promising target for test-time compute scaling in terminal agents.

Unified Multimodal Models (UMMs) often rely on separate visual representations for understanding and generation, increasing visual context length and complicating integration with established vision-language pretraining pipelines. Recent advances in pixel-space modeling offer an encoder-free alternative, but extending this paradigm from images to videos is non-trivial: video understanding and generation adopt different temporal representations, leaving the design of a unified visual interface an open question. We present PixelUMM, an encoder-free model for unified image and video understanding and generation directly in pixel space. PixelUMM represents images as spatial patches and videos as spatiotemporal tubelets, connecting raw pixels to a shared multimodal backbone through single-layer linear projections. Its Mixture-of-Transformers architecture combines shared attention with task-specific parameters and extends clean-pixel prediction to video generation, jointly supporting autoregressive text prediction and pixel-space flow matching. Experiments show that PixelUMM achieves competitive performance across image and video understanding and generation tasks. We further conduct empirical studies of key design choices, including decoder design and spatial-temporal patch size, providing insights for future pixel-space unified multimodal models.

Modern information systems, including many agentic workflows, use dense retrieval to explore large amounts of unstructured data. However, dense retrieval relies on surface-level semantic similarity, which is insufficient for increasingly complex search applications. Here, we investigate agentic retrieval that combines the reasoning capabilities of Large Language Models (LLMs) with the efficient corpus exploration of retrievers in a ReAct agentic loop to solve complex retrieval tasks. In our experiments, we show that agentic retrieval is more effective than standard retrieval, improving nDCG@10 by 8.7 points using the same embedding model. Moreover, while specialized retrieval methods struggle on out-of-domain tasks, agentic retrieval is highly generalizable: the same pipeline achieves competitive results on both the ViDoRe v3 and BRIGHT leaderboards. However, this improvement comes at a cost. On average, agentic retrieval takes 107.4 seconds, compared to 0.67 seconds for standard retrieval, and consumes 764.1K input and 5.8K output tokens per query. In short, our study demonstrates the effectiveness of agentic retrieval in modern data systems and motivates future work on more cost-efficient retrieval agents for large-scale deployment.

Reinforcement learning (RL) has greatly advanced the capabilities of large language models (LLMs), but its memory demands remain a barrier to broader adoption. We introduce LoGRA, an approach to RL post-training that reduces memory by retaining useful learning signals in low-rank gradient sketches. These compact representations support both model updates and efficient policy synchronization. To prevent overly large updates from disrupting learning, we complement gradient compression with predicted-KL step control, which estimates policy changes before applying each update and adjusts its magnitude accordingly. Across reasoning tasks, LoGRA reduces average training memory by up to 45.7\% without sacrificing performance. It also enables stable training of a 27B-parameter model for over 1,100 steps on a single eight-GPU node, where dense Adam runs out of memory, making previously memory-infeasible RL training practical. Code is available in the https://github.com/skzhang1/labs-molt/tree/logra/examples/scripts/logra{Molt library}.

Self-improving policies continually expose new failure patterns, changing what their judges must be able to verify. However, current fixed judges constrain both optimization feedback and the discovery of useful training examples, limiting further self-improvement. This challenge is even more acute in embodied reasoning, where reliable evaluation must account for spatial grounding, causal reasoning, and safety-aware decision-making. We introduce VeriFine, an agent harness framework that scales verification through the co-evolution of the policy, training curriculum, and judge. The Policy Improvement Loop uses a rubric judge to diagnose recurring failures, construct an adaptive curriculum, and optimize the policy. When progress plateaus and verification becomes a bottleneck, the Judge Improvement Loop selectively queries human guidance on informative failure cases and refines the judge through coactive calibration, in which humans and agents resolve disagreements and converge toward the objective rubric of physical reasoning. The revised judge then guides the next stage of data selection and policy optimization. Experiments on driving and robot navigation tasks demonstrate continuous self-improvement in both policy and judge capability across reinforcement and supervised fine-tuning. These results show how scaling verification supports continuous self-improvement as policy failure patterns evolve.

Long-context inference and Retrieval-Augmented Generation (RAG) handle evidence selection at vastly different scales, from a single long prompt to an entire corpus. We ask whether a single model-internal mechanism can select evidence across this range. We introduce UNifying REtrieval And Long-Context with a Single Model (UNREAL), a model-native evidence selection framework to span corpus retrieval and long-context inference. UNREAL encodes chunks and derives retrieval queries directly from the frozen LLM's internal representations. It adds fewer than 500K trainable parameters and leaves the backbone unchanged. On a 3B-token, 21M-chunk Wikipedia index, all four dense and hybrid UNREAL backbones outperform state-of-the-art retriever-reranker systems. The best model raises recall from 49.1% to 73.2% on HotpotQA, from 31.7% to 60.1% on 2WikiMultiHopQA, and from 8.8% to 14.4% on MuSiQue. Applied to long-context tasks, the same selection mechanism removes distractors before generation, raising NoLiMa accuracy from 1.0% to 24.83% at its maximum context length of 128K tokens, and LV-Eval's F1 score from 49.97% to 54.66% at 256K. UNREAL also reduces FLOPs and time-to-first-token relative to full-context inference from roughly 32K tokens onward, with larger gains as context grows. Together, these results establish model-internal evidence selection as a common foundation for corpus retrieval and evidence-sparse long-context inference.

Agentic reinforcement learning (RL) disaggregates training from rollout, so each policy update must reach the rollout clusters before the next batch. Transferring a full 1T checkpoint for such weight synchronization (refit) takes 87.5 min between two AWS regions. Measurements of BF16 training show that about 1% of weights change their stored values per step. Recent systems exploit this sparsity but fall short on placement, exactness, or efficiency: they reimplement placement rules, assemble full tensors, rebuild values arithmetically, or use a cross-cluster collective, and none fully recovers from mid-refit failures. We present NeMo-DCR (Delta-Compressed Refit), which sends only changes yet is bit-exact: receivers obtain the same parameter and buffer bits as a dense refit. For placement, fixed affine mappings project changes from training shards into the checkpoint's canonical coordinates, residual conversion covers the other changes, and the serving runtime's native loader places all changes in receiver storage. For exactness, compressible XOR masks carry affine changes whose projection and loader preserve stored bits, and overwrites carry the others. Receivers apply both in place, retries overwrite partial writes, and a joint commit binds the policy to the baseline for the next delta. For efficiency, object storage or a relay tree streams payloads during delta construction, without a cross-cluster collective. Even at 3% and 5% change rates, NeMo-DCR refits of 30B-1T models are 12-40times faster than a transport-only full-checkpoint reference. A 1T relay-tree refit at 3% takes 150 s instead of 87.5 min, making refits practical for cross-cluster agentic RL at trillion-parameter scale.

Real-time robot control demands enough visual history to infer motion and task progress, but processing that history can delay action. We present Long-WAM, a model-system framework for scaling the context of causal world-action models under real-time control constraints. Our central finding is that access to history is not the same as using it: longer histories pay off far more when the video foundation is pretrained autoregressively (AR). We first learn causal prediction from robot and egocentric videos without action labels, then preserve this history-to-future structure during world-action adaptation. On RoboCasa GR-1, increasing context from 0.0 to 19.2 seconds raises success from 63.3% to 78.7%, whereas a bidirectionally pretrained initialization shows no net gain; robot-domain AR pretraining further raises peak success on GR-1 and LIBERO-Long. Long-WAM also achieves the best results among compared methods on LIBERO-Long, RoboTwin 2.0, and DOMINO. Streaming observation encoding, asynchronous execution, and hardware-specific acceleration enable deployment on RTX 5090, DGX Spark, and Jetson AGX Thor without dropping future prediction; on RTX 5090, each action chunk, including future-video latent prediction, takes 107.4 ms. Real-time deployment on Unitree G1 and YAM supports dynamic and long-horizon manipulation, including 95% success on dynamic cup stacking, where Pi0.5 and Fast-WAM succeed in none of 20 trials. As a memory-informed executor, Long-WAM also complements higher-level planning in composite tasks.

Geometrically faithful and functional articulated 3D assets are essential for real-to-sim robot manipulation, where policies trained in simulation must transfer to physical objects. Recent mesh-based methods learn to infer articulation from annotated 3D assets, but deployment remains challenging when real-world objects fall outside the training distribution or their meshes are incomplete or corrupted. To address these limitations, we formulate articulated asset reconstruction as programmatic modeling grounded in partial geometric evidence and introduce USDCraft, a framework in which a pretrained LLM writes and revises executable programs for simulation-ready articulated assets without task-specific training. We propose source geometry analysis, which converts the source mesh into a metric textual description that distinguishes observed surface from unknown space, and iterative geometric rechecking, which re-encodes each candidate in the same representation so that discrepancies point to program edits while unobserved regions remain open to completion. Visual feedback and physical authoring guidance complete the modeling process, which produces articulated USD assets with explicit physical properties that load into Isaac Sim without manual adjustment. Experiments demonstrate leading articulation recovery on two benchmarks and validate USDCraft's effectiveness for real-to-sim-to-real robot manipulation.

GPU-parallel simulation provides abundant robot interaction, but existing benchmarks rarely combine this scale with heterogeneous manipulation tasks and standardized multi-task RL evaluation. We introduce Hebero (Heterogeneous Benchmark for Robot Learning), a GPU-parallel Isaac Lab benchmark that enables efficient joint training and evaluation of a single policy across all 40 heterogeneous tasks. Scaling experiments show that increasing parallel replicas per task improves success under a fixed wall-clock budget. To support learning with sparse rewards and limited demonstrations, we propose Demonstration-Guided Policy Optimization (DGPO), which reuses demonstrations for dense tracking rewards and asymmetric value learning. Its shared stack supports controlled comparisons of learner-specific demonstration interfaces within PPO. Within DGPO framework, we introduce IW-ABC, which uses a lightweight per-task learning progress signal to coordinate adaptive behavior cloning (ABC), relaxing demonstration guidance with task progress, and importance weighting (IW), emphasizing lagging tasks in PPO updates. With 50 demonstrations per task, IW-ABC achieves 90.1% state-input mean success, outperforming the strongest baseline FAMO-ABC by 7.8 percentage points. Its visual counterpart reaches 93.5% mean success. Real-world experiments further demonstrate that a single multi-task policy trained in simulation can successfully perform four tasks on a physical Piper robot. The project page is available at https://hebero-rl.github.io/.

Large language models (LLMs) and vision-language models (VLMs) are usually frozen after deployment, so they do not learn from the cases they solve. This is especially concerning in medicine, where new clinical evidence, updated guidelines, and new therapies can change established practice. Fine-tuning can update the model, but it requires access to model weights and additional training. Parameter-free methods avoid training, but they may overfit a fixed validation set, lack reliable domain knowledge, or lose visual details by saving experience only as text. To address these limitations, we present a model-agnostic framework that allows frozen LLMs and VLMs to learn from deployment experience through three forms of external expertise: a Skill that guides reasoning and tool use, a Knowledge Memory that stores reliable facts supported by earlier cases or trusted external evidence, and a Multimodal Knowledge Base that keeps visual examples and guides the model to relate each retrieved case to the current image. Instead of relying on a fixed validation set, a validation strategy keeps an update only if it helps on new cases without degrading performance on earlier ones. Across six benchmarks covering clinical diagnosis, clinical workflows, medical reasoning, and medical and non-medical visual reasoning, and with four open-weight and closed-source base models, our framework improves performance during online deployment by up to 34.2% over the base model on medical tasks, generalizes to unseen cases, transfers to other models without further optimization, and works in non-medical domains.

Reconstructing complete, scene-aligned 3D objects from casual images requires integrating sparse, uncertain observations and inferring surfaces hidden by occlusions. We present GATOR, a generative and agentic framework that recovers textured object assets and their scene-relative pose from one or more images. Our local modality mixer couples patch-aligned RGB, target-mask, and pointmap features before cross-view reasoning, preserving scene context while distinguishing the target from its surroundings. Text-guided semantic conditioning complements these spatial cues with category names and object captions through stage-specific adapters for structure, geometry, and appearance generation. The generated asset initializes a multimodal agent, providing instance-specific geometry and pose for targeted structural and texture refinement through an observation-guided edit-render-review loop. Across synthetic objects, cluttered tabletops, and indoor scenes, GATOR achieves strong geometric and appearance fidelity while recovering scene-relative pose from sparse observations. Time-budget comparisons and scene-level simulation further demonstrate the reconstruction efficiency and simulation readiness. Project page: https://research.nvidia.com/labs/lpr/gator/

Evaluating the physical consistency of generated videos remains a fundamental challenge. Existing approaches rely on off-the-shelf vision-language models, which can often be myopic to physical dynamics, or fine-tuned evaluators trained on human annotations, which overfit to dataset-specific cues and fail to generalize. A key challenge is that existing supervision sources provide either relative ordering or absolute scores, but not both reliably and consistently across varied settings. To this end, we introduce PhyProbe, an evaluator that extracts features from a frozen pretrained spatio-temporal encoder and maps them to a scalar physical consistency violation score via a lightweight scoring head. PhyProbe is trained through a unified objective combining pairwise ranking, regression on noisy scalar annotations, and anchor-based calibration over a curated set of heterogeneous supervision sources. Experiments show that PhyProbe outperforms prior methods on most pairwise benchmarks spanning real-generated and generated-generated pairs under varying correspondence, with the largest gains in no-correspondence and generated-generated settings where existing fine-tuned evaluators degrade sharply. PhyProbe achieves strong correlation with human judgments, with close agreement between rank-based and linear metrics, indicating that scores are both well ordered and anchored to a stable [0, 1] scale. Further, despite being trained on supervision indicative of physical consistency, without explicit general-preference labels, PhyProbe also performs competitively on human preference benchmarks: consistent with the observation that physics violations are entangled with broader quality degradations.

On-policy distillation (OPD) has become increasingly popular for transferring teacher capabilities to student models. In this work, we ask a critical research question: Is on-policy sampling always beneficial for distilling arbitrary teacher-student pairs? We show that a simple alternative, Semi-OPD, which distills from offline rollouts generated by the initial student, can often outperform OPD in both accuracy and training efficiency. Across 17 teacher-student pairs ranging from 1.5B to 235B parameters, Semi-OPD outperforms OPD in 14 cases, with up to +13.6% accuracy and 11.4x training speedup. We further find that the choice between OPD and Semi-OPD depends on the alignment between the initial teacher and student, quantified by an output-token overlap ratio: OPD is beneficial only when the two are highly aligned with high overlap ratios. Our deeper investigation suggests that effective distillation requires on-policyness w.r.t. both the student and the teacher. For misaligned pairs, student rollouts can become increasingly off-policy w.r.t. the teacher as context length grows, weakening the distillation signal. In contrast, Semi-OPD is often more stable, as it distills on shorter contexts while covering full trajectories and exposing the student to more teacher-preferred tokens. Beyond proposing Semi-OPD as an efficient alternative, our work motivates the community to rethink when to use OPD and to study stronger OPD variants with meaningful teacher-student pairs.

A latent recurrent language model applies a shared block of layers repeatedly, so one checkpoint can trade inference compute for accuracy by changing the loop count. At one loop, however, such models typically fall well short of a non-recurrent model of the same size, a one-loop tax that makes a separate non-recurrent model the better choice whenever latency matters. We present Elastic Latent Recurrence (ELR), a recipe for training looped language models without this tax. At one loop, an ELR model costs the same to serve as a non-recurrent model of the same size and, trained on the same data, reaches similar accuracy. Each additional loop then buys more accuracy for more inference compute. Three choices make this work: a gated state update with a learned step size, loop counts mixed within each optimizer update, and conditioning each pass on its loop index and budget. The first two preserve one-loop accuracy, and the third lowers loss at every additional loop. Mixed depths can be introduced late in pretraining to limit the added training cost, and with zero-initialized conditioning added at the switch, this late schedule reaches lower loss than mixed-depth training from scratch. In MoE models, reusing first-loop expert routes on later loops cuts mixed-depth update time by 11.7% with no measurable change in accuracy. At inference, keeping only the last loop's attention KV cache holds attention KV memory at its one-loop level while retaining most of the gain from additional loops. On 4B dense and 30B-A3B MoE hybrid models, ELR at one loop is 0.52 points below and 1.04 points above its matched baseline on a ten-task average, and four loops add 7.25 and 4.75 points. Carried through post-training, the recipe yields Koi-4B, a single checkpoint that scores an estimated 18 on the Artificial Analysis Intelligence Index at one loop, matching Qwen3.5-4B, and 29 at four loops.

Textual reasoning before acting has improved vision-language-action (VLA) models, but at the cost of latency: every action conditioned on the reasoning text must wait for autoregressive decoding. We show that actions do not need to wait for or condition on the generated reasoning to benefit from it, because the reasoning supervision already improves the backbone representation. We introduce TacitVLA, a reasoning VLA whose action expert never attends to the reasoning it generates for the current call. On long-horizon tasks where the reasoning text also serves as episodic memory, it can generate each entry during action execution rather than before acting. We evaluate it in a controlled study on four benchmarks spanning manipulation and autonomous driving, memory and non-memory tasks: RoboMME, RMBench, LIBERO, and PhysicalAI-AV. On all four, TacitVLA matches the performance of its explicit-reasoning counterpart at up to 3.4x lower latency, and matches the latency of the same architecture trained without reasoning at up to +17.1% success. In absolute terms, it surpasses the best previously published results on the RoboMME Counting suite (82.7% vs. 66.8%) and RMBench (77.5% vs. 56.5%), and reaches 72.9% on LIBERO-Plus and a 52.5% scene score on the public split of the PhysicalAI-AV closed-loop driving challenge. Project page: https://tacitvla.github.io.

Reinforcement learning (RL) post-training improves robot foundation models (RFMs) beyond their demonstrations, but real-world deployment demands more: learning new tasks efficiently while retaining previously acquired behaviors. Existing continual RL methods on top of VLAs mitigate forgetting but rely on on-policy updates with limited forward transfer, whereas off-policy methods improve single-task sample efficiency without addressing learner persistence across tasks. We propose ACCRUE, a continual off-policy RL framework that carries lightweight actor and critic networks across tasks, allowing each stage to reuse behavioral and value knowledge acquired through prior RL. The inherited critic adapts only on current-task transitions and guides current-task actor learning, while prior behavior is preserved by distilling the actor toward cached targets on a small number of retained episodes. Fixed visual features keep the inherited learner and its replay compatible with base-policy updates. Across contact-rich assembly sequences in simulation and on real-robot hardware, ACCRUE accelerates subsequent-task learning with near-zero forgetting and significantly reduces real-robot training time by 31.0\% to 68.5\%.

Evaluation of Computer-Use Agents (CUAs) is often limited to the final deliverables they create (at the end of hundreds of steps) and assessed with functional verifiers, as seen in OSWorld. However, such evaluation of end-state performance lacks transparency into how and why agents fail in various tasks, obfuscating critical insight for subsequent improvement. For instance, agents that err during keyboard inputs would require a different mitigation strategy from those that fail to precisely provide click-based inputs on the graphical UI. We introduce OSWorld-Pro: a set of over 300 tasks containing over 2800 subgoals to enable the procedural evaluation of CUAs grounded in over 67,000 human annotations. We use robust human-aligned LLM-Judges to evaluate the fulfillment of OSWorld-Pro subgoals and thereby reveal the progress that models make throughout a series of sequentially dependent subgoals. Our findings reveal that OSWorld-Pro is challenging even for state-of-the-art LLMs, with top performers like Claude Opus 5 achieving only 75.7% vs. 83.4% on OSWorld. Furthermore, we identify critical process-focused failure modes of various models (e.g. subgoal-irrelevant actions and click-based mistakes) to provide insights to improve performance and efficiency of CUAs.

We introduce Nemotron-Nano-9B-v2, a hybrid Mamba-Transformer language model designed to increase throughput for reasoning workloads while achieving state-of-the-art accuracy compared to similarly-sized models. Nemotron-Nano-9B-v2 builds on the Nemotron-H architecture, in which the majority of the self-attention layers in the common Transformer architecture are replaced with Mamba-2 layers, to achieve improved inference speed when generating the long thinking traces needed for reasoning. We create Nemotron-Nano-9B-v2 by first pre-training a 12-billion-parameter model (Nemotron-Nano-12B-v2-Base) on 20 trillion tokens using an FP8 training recipe. After aligning Nemotron-Nano-12B-v2-Base, we employ the Minitron strategy to compress and distill the model with the goal of enabling inference on up to 128k tokens on a single NVIDIA A10G GPU (22GiB of memory, bfloat16 precision). Compared to existing similarly-sized models (e.g., Qwen3-8B), we show that Nemotron-Nano-9B-v2 achieves on-par or better accuracy on reasoning benchmarks while achieving up to 6x higher inference throughput in reasoning settings like 8k input and 16k output tokens. We are releasing Nemotron-Nano-9B-v2, Nemotron-Nano12B-v2-Base, and Nemotron-Nano-9B-v2-Base checkpoints along with the majority of our pre- and post-training datasets on Hugging Face.

We introduce Nemotron Nano V2 VL, the latest model of the Nemotron vision-language series designed for strong real-world document understanding, long video comprehension, and reasoning tasks. Nemotron Nano V2 VL delivers significant improvements over our previous model, Llama-3.1-Nemotron-Nano-VL-8B, across all vision and text domains through major enhancements in model architecture, datasets, and training recipes. Nemotron Nano V2 VL builds on Nemotron Nano V2, a hybrid Mamba-Transformer LLM, and innovative token reduction techniques to achieve higher inference throughput in long document and video scenarios. We are releasing model checkpoints in BF16, FP8, and FP4 formats and sharing large parts of our datasets, recipes and training code.

We introduce Nemotron-Parse-1.1, a lightweight document parsing and OCR model that advances the capabilities of its predecessor, Nemoretriever-Parse-1.0. Nemotron-Parse-1.1 delivers improved capabilities across general OCR, markdown formatting, structured table parsing, and text extraction from pictures, charts, and diagrams. It also supports a longer output sequence length for visually dense documents. As with its predecessor, it extracts bounding boxes of text segments, as well as corresponding semantic classes. Nemotron-Parse-1.1 follows an encoder-decoder architecture with 885M parameters, including a compact 256M-parameter language decoder. It achieves competitive accuracy on public benchmarks making it a strong lightweight OCR solution. We release the model weights publicly on Huggingface, as well as an optimized NIM container, along with a subset of the training data as part of the broader Nemotron-VLM-v2 dataset. Additionally, we release Nemotron-Parse-1.1-TC which operates on a reduced vision token length, offering a 20% speed improvement with minimal quality degradation.

We introduce the Nemotron 3 family of models - Nano, Super, and Ultra. These models deliver strong agentic, reasoning, and conversational capabilities. The Nemotron 3 family uses a Mixture-of-Experts hybrid Mamba-Transformer architecture to provide best-in-class throughput and context lengths of up to 1M tokens. Super and Ultra models are trained with NVFP4 and incorporate LatentMoE, a novel approach that improves model quality. The two larger models also include MTP layers for faster text generation. All Nemotron 3 models are post-trained using multi-environment reinforcement learning enabling reasoning, multi-step tool use, and support granular reasoning budget control. Nano, the smallest model, outperforms comparable models in accuracy while remaining extremely cost-efficient for inference. Super is optimized for collaborative agents and high-volume workloads such as IT ticket automation. Ultra, the largest model, provides state-of-the-art accuracy and reasoning performance. Nano is released together with its technical report and this white paper, while Super and Ultra will follow in the coming months. We will openly release the model weights, pre- and post-training software, recipes, and all data for which we hold redistribution rights.

As autonomous vehicle capabilities advance, the safe evaluation of driving policies in long-tail scenarios remains a critical bottleneck. In closed-loop simulation, the driving policy model actively interacts with the environment, where its actions dynamically update the simulator state and directly influence the next set of generated sensor observations. While recent reconstruction-based neural simulators offer photorealism, they are fundamentally constrained by their initial captured data and struggle to generalize to highly dynamic or novel scenes. To overcome these limitations, we introduce OmniDreams, a foundation generative world model mid- and post-trained from the Cosmos diffusion model to autoregressively generate action-conditioned videos in real time. By leveraging the rich visual priors of Cosmos and mid- and post-training on 21k hours of driving scenarios, OmniDreams synthesizes complex, unobserved phenomena that are hard for traditional simulators to capture, such as extreme weather and unpredictable dynamic agent behaviors. Crucially, it autoregressively conditions its photorealistic sensor generation on past frames, the current simulator state, and immediate driving actions. Deployed in a closed-loop system with the Alpamayo 1 policy model and AlpaSim orchestrator, OmniDreams acts as a highly responsive, reactive environment, providing a scalable and comprehensive solution for training and evaluating next-generation autonomous driving policies. We additionally show preliminary results indicating that a world-action model (WAM) post-trained from OmniDreams achieves strong performance on the Physical AI Autonomous Vehicles NuRec dataset, surpassing the VLA-based Alpamayo 1.5 research policy model while using only 1/5 the total parameters. These results highlight the potential for a real-time world model like OmniDreams to also serve as a backbone for policy architectures.

Traditional agent development is split across prompt templates, tool schemas, callback code, and workflow graphs. We present NVIDIA Object-Oriented Agents (NOOA), a model-agnostic Python framework for building reliable AI agents. NOOA takes a simpler approach: an agent is a Python object. Its methods are the actions the model can take, fields are its state, docstrings are its prompts, and its type annotations are contracts. A method whose code body consists of "..." is completed at runtime by an LLM-driven agent loop, while methods with normal bodies remain standard deterministic Python. This gives developers and agents the same interface, so agent behavior can be tested, traced, refactored, and improved just like other software. This paper makes three contributions. (1) We present the agent-as-a-Python-object programming model and the design principles behind it. Where Python has existing abstractions, we adopt them directly. Agent-specific capabilities--context, events, state rendering, long-term memory, and validated LLM loops--are exposed through simple Pythonic APIs, so both developers and agents share one familiar programming model. (2) We identify six model-facing ideas that NOOA is, to our knowledge, the first to combine on a single surface: typed input/output, pass-by-reference over live objects, code as action, programmable loop engineering, explicit object state, and model-callable harness APIs for context and events. We find the community already converging on several of these ideas--often as experimental or partial features--and present the comparison to encourage further adoption. (3) We demonstrate that current models use this interface effectively, both in targeted capability tests and on agentic and reasoning benchmarks such as SWE-bench Verified and Terminal-Bench 2.0 and ARC-AGI-3.

NVDLA is an open-source deep neural network (DNN) accelerator which has received a lot of attention by the community since its introduction by Nvidia. It is a full-featured hardware IP and can serve as a good reference for conducting research and development of SoCs with integrated accelerators. However, an expensive FPGA board is required to do experiments with this IP in a real SoC. Moreover, since NVDLA is clocked at a lower frequency on an FPGA, it would be hard to do accurate performance analysis with such a setup. To overcome these limitations, we integrate NVDLA into a real RISC-V SoC on the Amazon cloud FPGA using FireSim, a cycle-exact FPGA-accelerated simulator. We then evaluate the performance of NVDLA by running YOLOv3 object-detection algorithm. Our results show that NVDLA can sustain 7.5 fps when running YOLOv3. We further analyze the performance by showing that sharing the last-level cache with NVDLA can result in up to 1.56x speedup. We then identify that sharing the memory system with the accelerator can result in unpredictable execution time for the real-time tasks running on this platform. We believe this is an important issue that must be addressed in order for on-chip DNN accelerators to be incorporated in real-time embedded systems.

We introduce CASS, the first large-scale dataset and model suite for cross-architecture GPU code transpilation, targeting both source-level (CUDA leftrightarrow HIP) and assembly-level (Nvidia SASS leftrightarrow AMD RDNA3) translation. The dataset comprises 70k verified code pairs across host and device, addressing a critical gap in low-level GPU code portability. Leveraging this resource, we train the CASS family of domain-specific language models, achieving 95% source translation accuracy and 37.5% assembly translation accuracy, substantially outperforming commercial baselines such as GPT-4o, Claude, and Hipify. Our generated code matches native performance in over 85% of test cases, preserving runtime and memory behavior. To support rigorous evaluation, we introduce CASS-Bench, a curated benchmark spanning 16 GPU domains with ground-truth execution. All data, models, and evaluation tools are released as open source to foster progress in GPU compiler tooling, binary compatibility, and LLM-guided hardware translation. Dataset and benchmark are on https://huggingface.co/datasets/MBZUAI/cass{blue{HuggingFace}}, with code at https://github.com/GustavoStahl/CASS{blue{GitHub}}.

GPUs are the most popular platform for accelerating HPC workloads, such as artificial intelligence and science simulations. However, most microarchitectural research in academia relies on GPU core pipeline designs based on architectures that are more than 15 years old. This paper reverse engineers modern NVIDIA GPU cores, unveiling many key aspects of its design and explaining how GPUs leverage hardware-compiler techniques where the compiler guides hardware during execution. In particular, it reveals how the issue logic works including the policy of the issue scheduler, the structure of the register file and its associated cache, and multiple features of the memory pipeline. Moreover, it analyses how a simple instruction prefetcher based on a stream buffer fits well with modern NVIDIA GPUs and is likely to be used. Furthermore, we investigate the impact of the register file cache and the number of register file read ports on both simulation accuracy and performance. By modeling all these new discovered microarchitectural details, we achieve 18.24% lower mean absolute percentage error (MAPE) in execution cycles than previous state-of-the-art simulators, resulting in an average of 13.98% MAPE with respect to real hardware (NVIDIA RTX A6000). Also, we demonstrate that this new model stands for other NVIDIA architectures, such as Turing. Finally, we show that the software-based dependence management mechanism included in modern NVIDIA GPUs outperforms a hardware mechanism based on scoreboards in terms of performance and area.

In the ever-evolving landscape of artificial intelligence (AI) and large language models (LLMs), handling and leveraging data effectively has become a critical challenge. Most state-of-the-art machine learning algorithms are data-centric. However, as the lifeblood of model performance, necessary data cannot always be centralized due to various factors such as privacy, regulation, geopolitics, copyright issues, and the sheer effort required to move vast datasets. In this paper, we explore how federated learning enabled by NVIDIA FLARE can address these challenges with easy and scalable integration capabilities, enabling parameter-efficient and full supervised fine-tuning of LLMs for natural language processing and biopharmaceutical applications to enhance their accuracy and robustness.

Graphics processing units (GPUs) are continually evolving to cater to the computational demands of contemporary general-purpose workloads, particularly those driven by artificial intelligence (AI) utilizing deep learning techniques. A substantial body of studies have been dedicated to dissecting the microarchitectural metrics characterizing diverse GPU generations, which helps researchers understand the hardware details and leverage them to optimize the GPU programs. However, the latest Hopper GPUs present a set of novel attributes, including new tensor cores supporting FP8, DPX, and distributed shared memory. Their details still remain mysterious in terms of performance and operational characteristics. In this research, we propose an extensive benchmarking study focused on the Hopper GPU. The objective is to unveil its microarchitectural intricacies through an examination of the new instruction-set architecture (ISA) of Nvidia GPUs and the utilization of new CUDA APIs. Our approach involves two main aspects. Firstly, we conduct conventional latency and throughput comparison benchmarks across the three most recent GPU architectures, namely Hopper, Ada, and Ampere. Secondly, we delve into a comprehensive discussion and benchmarking of the latest Hopper features, encompassing the Hopper DPX dynamic programming (DP) instruction set, distributed shared memory, and the availability of FP8 tensor cores. The microbenchmarking results we present offer a deeper understanding of the novel GPU AI function units and programming features introduced by the Hopper architecture. This newfound understanding is expected to greatly facilitate software optimization and modeling efforts for GPU architectures. To the best of our knowledge, this study makes the first attempt to demystify the tensor core performance and programming instruction sets unique to Hopper GPUs.

Analytical framework for predicting General Matrix Multiplication (GEMM) performance on modern GPUs, focusing on runtime, power consumption, and energy efficiency. Our study employs two approaches: a custom-implemented tiled matrix multiplication kernel for fundamental analysis, and NVIDIA's CUTLASS library for comprehensive performance data collection across advanced configurations. Using the NVIDIA RTX 4070 as our experimental platform, we developed a Random Forest-based prediction model with multi-output regression capability. Through analysis of both naive tiled matrix multiplication with varying tile sizes (1 to 32) and 16,128 CUTLASS GEMM operations across diverse configurations, we identified critical performance patterns related to matrix dimensions, thread block configurations, and memory access patterns. Our framework achieved exceptional accuracy with an R^2 score of 0.98 for runtime prediction (mean error 15.57%) and 0.78 for power prediction (median error 5.42%). The system successfully predicts performance across matrix sizes, demonstrating robust scaling behavior. Our results show that optimal tile size selection can improve performance by up to 3.2x while reducing power consumption by 22% compared to baseline configurations. Analysis of shared memory utilization and SM occupancy reveals that tile sizes of 16x16 achieve the best balance between parallelism and resource usage. The implementation of our framework, including prediction models and analysis tools, is available as an open-source project at GPPerf [https://github.com/pavlyhalim/GPPerf].

This report evaluates the performance impact of enabling Trusted Execution Environments (TEE) on NVIDIA Hopper GPUs for large language model (LLM) inference tasks. We benchmark the overhead introduced by TEE mode across various LLMs and token lengths, with a particular focus on the bottleneck caused by CPU-GPU data transfers via PCIe. Our results indicate that while there is minimal computational overhead within the GPU, the overall performance penalty is primarily attributable to data transfer. For the majority of typical LLM queries, the overhead remains below 7%, with larger models and longer sequences experiencing nearly zero overhead.

Unprecedented agility and dexterous manipulation have been demonstrated with controllers based on deep reinforcement learning (RL), with a significant impact on legged and humanoid robots. Modern tooling and simulation platforms, such as NVIDIA Isaac Sim, have been enabling such advances. This article focuses on demonstrating the applications of Isaac in local planning and obstacle avoidance as one of the most fundamental ways in which a mobile robot interacts with its environments. Although there is extensive research on proprioception-based RL policies, the article highlights less standardized and reproducible approaches to exteroception. At the same time, the article aims to provide a base framework for end-to-end local navigation policies and how a custom robot can be trained in such simulation environment. We benchmark end-to-end policies with the state-of-the-art Nav2, navigation stack in Robot Operating System (ROS). We also cover the sim-to-real transfer process by demonstrating zero-shot transferability of policies trained in the Isaac simulator to real-world robots. This is further evidenced by the tests with different simulated robots, which show the generalization of the learned policy. Finally, the benchmarks demonstrate comparable performance to Nav2, opening the door to quick deployment of state-of-the-art end-to-end local planners for custom robot platforms, but importantly furthering the possibilities by expanding the state and action spaces or task definitions for more complex missions. Overall, with this article we introduce the most important steps, and aspects to consider, in deploying RL policies for local path planning and obstacle avoidance with Isaac Sim training, Gazebo testing, and ROS 2 for real-time inference in real robots. The code is available at https://github.com/sahars93/RL-Navigation.

This is the 1st part of the dissertation for my master degree and compares the power consumption using the default floating point (32bit) and Nvidia mixed precision (16bit and 32bit) while training a classification ML model. A custom PC with specific hardware was built to perform the experiments, and different ML hyper-parameters, such as batch size, neurons, and epochs, were chosen to build Deep Neural Networks (DNN). Additionally, various software was used during the experiments to collect the power consumption data in Watts from the Graphics Processing Unit (GPU), Central Processing Unit (CPU), Random Access Memory (RAM) and manually from a wattmeter connected to the wall. A benchmarking test with default hyper parameter values for the DNN was used as a reference, while the experiments used a combination of different settings. The results were recorded in Excel, and descriptive statistics were chosen to calculate the mean between the groups and compare them using graphs and tables. The outcome was positive when using mixed precision combined with specific hyper-parameters. Compared to the benchmarking, the optimisation for the classification reduced the power consumption between 7 and 11 Watts. Similarly, the carbon footprint is reduced because the calculation uses the same power consumption data. Still, a consideration is required when configuring hyper-parameters because it can negatively affect hardware performance. However, this research required inferential statistics, specifically ANOVA and T-test, to compare the relationship between the means. Furthermore, tests indicated no statistical significance of the relationship between the benchmarking and experiments. However, a more extensive implementation with a cluster of GPUs can increase the sample size significantly, as it is an essential factor and can change the outcome of the statistical analysis.

Video Foundation Models (VFMs) have recently been used to simulate the real world to train physical AI systems and develop creative visual experiences. However, there are significant challenges in training large-scale, high quality VFMs that can generate high-quality videos. We present a scalable, open-source VFM training pipeline with NVIDIA NeMo, providing accelerated video dataset curation, multimodal data loading, and parallelized video diffusion model training and inference. We also provide a comprehensive performance analysis highlighting best practices for efficient VFM training and inference.

Fringe projection profilometry (FPP) has been established as a high-accuracy 3D reconstruction method capable of achieving sub-pixel accuracy. However, this technique faces significant constraints due to complex calibration requirements, bulky system footprint, and sensitivity to environmental conditions. To address these limitations, we present VIRTUS-FPP, the first comprehensive physics-based virtual sensor modeling framework for FPP built in NVIDIA Isaac Sim. By leveraging the physics-based rendering and programmable sensing capabilities of simulation, our framework enables end-to-end modeling from calibration to reconstruction with full mathematical fidelity to the underlying principles of structured light. We conduct comprehensive virtual calibration and validate our system's reconstruction accuracy through quantitative comparison against ground truth geometry. Additionally, we demonstrate the ability to model the virtual system as a digital twin by replicating a physical FPP system in simulation and validating correspondence between virtual and real-world measurements. Experimental results demonstrate that VIRTUS-FPP accurately models optical phenomena critical to FPP and achieves results comparable to real-world systems while offering unprecedented flexibility for system configuration, sensor prototyping, and environmental control. This framework significantly accelerates the development of real-world FPP systems by enabling rapid virtual prototyping before physical implementation.

The transition of cellular networks to (i) software-based systems on commodity hardware and (ii) platforms for services beyond connectivity introduces critical system-level challenges. As sensing emerges as a key feature toward 6G standardization, supporting Integrated Sensing and Communication (ISAC) with limited bandwidth and piggybacking on communication signals, while maintaining high reliability and performance, remains a fundamental challenge. In this paper, we provide two key contributions. First, we present a programmable, open-source framework for processing PHY/MAC signals through real-time, GPU-accelerated Artificial Intelligence (AI) applications on the edge Radio Access Network (RAN) infrastructure. Building on the Open RAN dApp architecture, the framework interfaces with a GPU-accelerated gNB based on NVIDIA Aerial Testbed (ATB), feeding PHY/MAC data to custom AI logic with a framework overhead of 150 us, multiple inference engines, and support for several AI backends. We evaluate the framework on multiple GPU platforms with and without hardware-level GPU isolation. Second, we demonstrate the framework capabilities through cuSense, an indoor localization dApp that consumes uplink DMRS channel estimates, removes static multipath components, and runs a neural network to infer the position of a moving person. Evaluated on a 3GPP-compliant 5G NR deployment, cuSense achieves a mean localization error of 77 cm, with 75% of predictions falling within 1 meter, without dedicated sensing hardware or modifications to the RAN stack or signals. The framework is released as open source, providing a reference design for future AI-native RANs and ISAC applications.

OpenMC is an open source Monte Carlo neutral particle transport application that has recently been ported to GPU using the OpenMP target offloading model. We examine the performance of OpenMC at scale on the Frontier, Polaris, and Aurora supercomputers, demonstrating that performance portability has been achieved by OpenMC across all three major GPU vendors (AMD, NVIDIA, and Intel). OpenMC's GPU performance is compared to both the traditional CPU-based version of OpenMC as well as several other state-of-the-art CPU-based Monte Carlo particle transport applications. We also provide historical context by analyzing OpenMC's performance on several legacy GPU and CPU architectures. This work includes some of the first published results for a scientific simulation application at scale on a supercomputer featuring Intel's Max series "Ponte Vecchio" GPUs. It is also one of the first demonstrations of a large scientific production application using the OpenMP target offloading model to achieve high performance on all three major GPU platforms.

The rapid expansion of AI has intensified concerns about its environmental sustainability. Yet, current assessments predominantly focus on operational carbon emissions using secondary data or estimated values, overlooking environmental impacts in other life cycle stages. This study presents the first comprehensive multi-criteria life cycle assessment (LCA) of AI training, examining 16 environmental impact categories based on detailed primary data collection of the Nvidia A100 SXM 40GB GPU. The LCA results for training BLOOM reveal that the use phase dominates 11 of 16 impact categories including climate change (96\%), while manufacturing dominates the remaining 5 impact categories including human toxicity, cancer (99\%) and mineral and metal depletion (85\%). For training GPT-4, the use phase dominates 10 of 16 impact categories, contributing about 96\% to both the climate change and resource use, fossils category. The manufacturing stage dominates 6 of 16 impact categories including human toxicity, cancer (94\%) and eutrophication, freshwater (81\%). Assessing the cradle-to-gate environmental impact distribution across the GPU components reveals that the GPU chip is the largest contributor across 10 of 16 of impact categories and shows particularly pronounced contributions to climate change (81\%) and resource use, fossils (80\%). While primary data collection results in modest changes in carbon estimates compared to database-derived estimates, substantial variations emerge in other categories. Most notably, minerals and metals depletion increases by 33\%, demonstrating the critical importance of primary data for non-carbon accounting. This multi-criteria analysis expands the Sustainable AI discourse beyond operational carbon emissions, challenging current sustainability narratives and highlighting the need for policy frameworks addressing the full spectrum of AI's environmental impact.

We release the Nemotron-4 340B model family, including Nemotron-4-340B-Base, Nemotron-4-340B-Instruct, and Nemotron-4-340B-Reward. Our models are open access under the NVIDIA Open Model License Agreement, a permissive model license that allows distribution, modification, and use of the models and its outputs. These models perform competitively to open access models on a wide range of evaluation benchmarks, and were sized to fit on a single DGX H100 with 8 GPUs when deployed in FP8 precision. We believe that the community can benefit from these models in various research studies and commercial applications, especially for generating synthetic data to train smaller language models. Notably, over 98% of data used in our model alignment process is synthetically generated, showcasing the effectiveness of these models in generating synthetic data. To further support open research and facilitate model development, we are also open-sourcing the synthetic data generation pipeline used in our model alignment process.

We introduce Edify Image, a family of diffusion models capable of generating photorealistic image content with pixel-perfect accuracy. Edify Image utilizes cascaded pixel-space diffusion models trained using a novel Laplacian diffusion process, in which image signals at different frequency bands are attenuated at varying rates. Edify Image supports a wide range of applications, including text-to-image synthesis, 4K upsampling, ControlNets, 360 HDR panorama generation, and finetuning for image customization.

We introduce Edify 3D, an advanced solution designed for high-quality 3D asset generation. Our method first synthesizes RGB and surface normal images of the described object at multiple viewpoints using a diffusion model. The multi-view observations are then used to reconstruct the shape, texture, and PBR materials of the object. Our method can generate high-quality 3D assets with detailed geometry, clean shape topologies, high-resolution textures, and materials within 2 minutes of runtime.

Physical AI needs to be trained digitally first. It needs a digital twin of itself, the policy model, and a digital twin of the world, the world model. In this paper, we present the Cosmos World Foundation Model Platform to help developers build customized world models for their Physical AI setups. We position a world foundation model as a general-purpose world model that can be fine-tuned into customized world models for downstream applications. Our platform covers a video curation pipeline, pre-trained world foundation models, examples of post-training of pre-trained world foundation models, and video tokenizers. To help Physical AI builders solve the most critical problems of our society, we make our platform open-source and our models open-weight with permissive licenses available via https://github.com/NVIDIA/Cosmos.