Daily Papers

Community GPU platforms are emerging as a cost-effective and democratized alternative to centralized GPU clusters for AI workloads, aggregating idle consumer GPUs from globally distributed and heterogeneous environments. However, their extreme hardware/software diversity, volatile availability, and variable network conditions render traditional schedulers ineffective, leading to suboptimal task completion. In this work, we present REACH (Reinforcement Learning for Efficient Allocation in Community and Heterogeneous Networks), a Transformer-based reinforcement learning framework that redefines task scheduling as a sequence scoring problem to balance performance, reliability, cost, and network efficiency. By modeling both global GPU states and task requirements, REACH learns to adaptively co-locate computation with data, prioritize critical jobs, and mitigate the impact of unreliable resources. Extensive simulation results show that REACH improves task completion rates by up to 17%, more than doubles the success rate for high-priority tasks, and reduces bandwidth penalties by over 80% compared to state-of-the-art baselines. Stress tests further demonstrate its robustness to GPU churn and network congestion, while scalability experiments confirm its effectiveness in large-scale, high-contention scenarios.

Outcome RL raises pass@1 but not pass@k at large k (Yue et al., 2025). But every pass@1 is scored under a token budget. Every recipe also trains under one. On physics and math problems at fixed token budgets, we compare the pass@1 of 20 released RL models (1.5B to 32B) with that of the thinking models they started from. We ask whether each pass@1 gain is changed behaviour or new knowledge. We divide each change in pass@1 into three parts. Finishing measures answering before the budget runs out. Reliability measures being right once finished. Reach measures problems RL solves that its base answered wrongly in all eight tries, minus problems the base solves that RL answered wrongly in all eight. We find four things. (1) Where the base often hits the token budget before answering, most of the change, gain or loss, is finishing (82% at 4k and 8k). Given more tokens, the base closes most of the finishing gap itself. (2) Where the base has enough tokens, the gain is reliability: the RL model is graded right more often, even on problems both finish. (3) By our definition, RL rarely solves what its base cannot. Reach adds at most 2.1 percentage points on any of our four physics and math sets. We checked 144 physics problems that only the RL model solved. Of these, 3.5% hold up when resampled or read. In a random sample, nine of ten new RL steps a human confirmed also appear in the base's samples. (4) In a small-scale RL run on an 8B model, the gain on new problems is finishing, with reliability flat. Supplying each problem's physical setup was not shown to improve on plain RL.

Benchmark gains are often treated as evidence of greater LLM capability. Yet the same gain can reflect different changes in model behavior. A model may reach new answers, or produce answers that were already within reach. Aggregate scores do not distinguish these changes question by question. We establish a question-level audit under fixed budgets, temperatures, and answer formats. A question is realized when the default deployment procedure produces the correct answer. A question is reachable when a specified probe finds that answer within a fixed budget. We first test whether inference-time layer routing can expand reachability. Under a matched budget, random routes match or exceed structured search in all 43 model and task settings. Answer-blind procedures retain almost none of this gain, which instead requires access to the correct answer. We then ask why reachable answers sometimes fail to appear. Across six cases spanning 0.5B to 31B, silencing one identified MLP block repairs 68 to 92 percent of a predefined failure set. We next test whether training closes the gap by expanding reachability. In five of six matched evaluations, deployed performance rises while the reachable ceiling remains flat or falls. For DAPO, the deployed score rises by 14.7 points while the reachable ceiling falls by 13.3 points. Across the settings we audit, realization and reachability therefore do not always change together. Claims of capability expansion should report both realized performance and reachability under matched evaluation conditions. Code is available at https://github.com/LiZaiyuan0619/reachability-not-realization

Reinforcement learning offers the prospect of a reusable sequential decision-making mechanism for spacecraft trajectory design, motivating policy interfaces that connect learned decisions to the underlying maneuver geometry. This paper develops Reachability Analysis-Informed Reinforcement Learning (RARL) for deterministic multi-impulse interplanetary transfers, placing intermediate waypoint selection at the center of the learned decision process. Local first-order reachability maps bounded velocity perturbations into an ellipsoidal set of next-node positions, within which the policy selects its waypoint. Lambert reconstruction then determines the corresponding maneuver to reach this selected waypoint along a dynamically consistent ballistic arc, coupling learned transfer-geometry selection with classical astrodynamics. A terminal two-impulse reconstruction completes the rendezvous, supported by a linear maneuver-demand assessment used for reward shaping. Numerical studies characterize this interface on a two-body Earth-Mars benchmark. Across three independent training runs, RARL achieves a mean maneuver cost of 10.23 km/s, 1.72% above a validated local sequential convex programming reference. Training over dispersed initial states extends policy reuse across a departure family with fixed target state and transfer duration. Each of the three independently trained multi-state policies completes all 10,000 held-out Monte Carlo departures without impulse-cap violations, compared with a mean feasibility rate of 6.49% for single-state policies. This broader sampled feasibility is accompanied by a 0.61% increase in mean nominal maneuver cost, without further training across departures. These results demonstrate that a reachability-informed decision interface supports benchmark-quality trajectory construction and policy reuse across dispersed departure conditions.

In Reinforcement Learning (RL), Laplacian Representation (LapRep) is a task-agnostic state representation that encodes the geometry of the environment. A desirable property of LapRep stated in prior works is that the Euclidean distance in the LapRep space roughly reflects the reachability between states, which motivates the usage of this distance for reward shaping. However, we find that LapRep does not necessarily have this property in general: two states having small distance under LapRep can actually be far away in the environment. Such mismatch would impede the learning process in reward shaping. To fix this issue, we introduce a Reachability-Aware Laplacian Representation (RA-LapRep), by properly scaling each dimension of LapRep. Despite the simplicity, we demonstrate that RA-LapRep can better capture the inter-state reachability as compared to LapRep, through both theoretical explanations and experimental results. Additionally, we show that this improvement yields a significant boost in reward shaping performance and also benefits bottleneck state discovery.

Recently, mobile AI agents have gained increasing attention. Given a task, mobile AI agents can interact with mobile devices in multiple steps and finally form a GUI flow that solves the task. However, existing agents tend to focus on most task-relevant elements at each step, leading to local optimal solutions and ignoring the overall GUI flow. To address this issue, we constructed a training dataset called MobileReach, which breaks the task into page reaching and operation subtasks. Furthermore, we propose ReachAgent, a two-stage framework that focuses on improving its task-completion abilities. It utilizes the page reaching and page operation subtasks, along with reward-based preference GUI flows, to further enhance the agent. Experimental results show that ReachAgent significantly improves the IoU Acc and Text Acc by 7.12% and 7.69% on the step-level and 4.72% and 4.63% on the task-level compared to the SOTA agent. Our data and code will be released upon acceptance.

Given a question, a language model (LM) implicitly encodes a distribution over possible answers. In practice, post-training procedures for LMs often collapse this distribution onto a single dominant mode. While this is generally not a problem for benchmark-style evaluations that assume one correct answer, many real-world tasks inherently involve multiple valid answers or irreducible uncertainty. Examples include medical diagnosis, ambiguous question answering, and settings with incomplete information. In these cases, we would like LMs to generate multiple plausible hypotheses, ideally with confidence estimates for each one, and without computationally intensive repeated sampling to generate non-modal answers. This paper describes a multi-answer reinforcement learning approach for training LMs to perform distributional reasoning over multiple answers during inference. We modify the RL objective to enable models to explicitly generate multiple candidate answers in a single forward pass, internalizing aspects of inference-time search into the model's generative process. Across question-answering, medical diagnostic, and coding benchmarks, we observe improved diversity, coverage, and set-level calibration scores compared to single answer trained baselines. Models trained with our approach require fewer tokens to generate multiple answers than competing approaches. On coding tasks, they are also substantially more accurate. These results position multi-answer RL as a principled and compute-efficient alternative to inference-time scaling procedures such as best-of-k. Code and more information can be found at https://multi-answer-rl.github.io/.

The vulnerability of artificial intelligence (AI) and machine learning (ML) against adversarial disturbances and attacks significantly restricts their applicability in safety-critical systems including cyber-physical systems (CPS) equipped with neural network components at various stages of sensing and control. This paper addresses the reachable set estimation and safety verification problems for dynamical systems embedded with neural network components serving as feedback controllers. The closed-loop system can be abstracted in the form of a continuous-time sampled-data system under the control of a neural network controller. First, a novel reachable set computation method in adaptation to simulations generated out of neural networks is developed. The reachability analysis of a class of feedforward neural networks called multilayer perceptrons (MLP) with general activation functions is performed in the framework of interval arithmetic. Then, in combination with reachability methods developed for various dynamical system classes modeled by ordinary differential equations, a recursive algorithm is developed for over-approximating the reachable set of the closed-loop system. The safety verification for neural network control systems can be performed by examining the emptiness of the intersection between the over-approximation of reachable sets and unsafe sets. The effectiveness of the proposed approach has been validated with evaluations on a robotic arm model and an adaptive cruise control system.

Training reinforcement learning agents at solving a given task is highly dependent on identifying optimal sets of hyperparameters and selecting suitable environment input / output configurations. This tedious process could be eased with a straightforward toolbox allowing its user to quickly compare different training parameter sets. We present rl_reach, a self-contained, open-source and easy-to-use software package designed to run reproducible reinforcement learning experiments for customisable robotic reaching tasks. rl_reach packs together training environments, agents, hyperparameter optimisation tools and policy evaluation scripts, allowing its users to quickly investigate and identify optimal training configurations. rl_reach is publicly available at this URL: https://github.com/PierreExeter/rl_reach.

A treatment may affect some individuals while leaving others unaffected. We study the reach of treatment effects by asking how large an unaffected covariate region could be. We develop efficient local randomization tests over nearest-neighbour regions to construct a finite-sample valid upper confidence bound for the size of the largest zero-effect region. A small bound provides evidence that treatment effects extend broadly across covariate values by ruling out large zero-effect regions. Under a general outcome model, we characterize how the size of the bound depends on the number of affected units, the size of their treatment effects, and the geometry of the true zero-effect set. We show that, when region size is measured as a sample fraction, the excess of the upper confidence bound over the true size decreases to zero at a minimax optimal rate up to a logarithmic factor. Numerical simulations assess the coverage, power and computational efficiency of our method. Applications to voter-turnout, HIV clinical-trial, and AI-assisted writing data illustrate how our method rules out large zero-effect regions across the covariates of interest.

Large Language Models (LLMs) have achieved remarkable results, but their increasing resource demand has become a major obstacle to the development of powerful and accessible super-human intelligence. This report introduces JetMoE-8B, a new LLM trained with less than $0.1 million, using 1.25T tokens from carefully mixed open-source corpora and 30,000 H100 GPU hours. Despite its low cost, the JetMoE-8B demonstrates impressive performance, with JetMoE-8B outperforming the Llama2-7B model and JetMoE-8B-Chat surpassing the Llama2-13B-Chat model. These results suggest that LLM training can be much more cost-effective than generally thought. JetMoE-8B is based on an efficient Sparsely-gated Mixture-of-Experts (SMoE) architecture, composed of attention and feedforward experts. Both layers are sparsely activated, allowing JetMoE-8B to have 8B parameters while only activating 2B for each input token, reducing inference computation by about 70% compared to Llama2-7B. Moreover, JetMoE-8B is highly open and academia-friendly, using only public datasets and training code. All training parameters and data mixtures have been detailed in this report to facilitate future efforts in the development of open foundation models. This transparency aims to encourage collaboration and further advancements in the field of accessible and efficient LLMs. The model weights are publicly available at https://github.com/myshell-ai/JetMoE.

Autonomous systems, such as self-driving cars and drones, have made significant strides in recent years by leveraging visual inputs and machine learning for decision-making and control. Despite their impressive performance, these vision-based controllers can make erroneous predictions when faced with novel or out-of-distribution inputs. Such errors can cascade into catastrophic system failures and compromise system safety. In this work, we compute Neural Reachable Tubes, which act as parameterized approximations of Backward Reachable Tubes to stress-test the vision-based controllers and mine their failure modes. The identified failures are then used to enhance the system safety through both offline and online methods. The online approach involves training a classifier as a run-time failure monitor to detect closed-loop, system-level failures, subsequently triggering a fallback controller that robustly handles these detected failures to preserve system safety. For the offline approach, we improve the original controller via incremental training using a carefully augmented failure dataset, resulting in a more robust controller that is resistant to the known failure modes. In either approach, the system is safeguarded against shortcomings that transcend the vision-based controller and pertain to the closed-loop safety of the overall system. We validate the proposed approaches on an autonomous aircraft taxiing task that involves using a vision-based controller to guide the aircraft towards the centerline of the runway. Our results show the efficacy of the proposed algorithms in identifying and handling system-level failures, outperforming methods that rely on controller prediction error or uncertainty quantification for identifying system failures.

In this work, we address the challenging problem of long-horizon goal-reaching policy learning from non-expert, action-free observation data. Unlike fully labeled expert data, our data is more accessible and avoids the costly process of action labeling. Additionally, compared to online learning, which often involves aimless exploration, our data provides useful guidance for more efficient exploration. To achieve our goal, we propose a novel subgoal guidance learning strategy. The motivation behind this strategy is that long-horizon goals offer limited guidance for efficient exploration and accurate state transition. We develop a diffusion strategy-based high-level policy to generate reasonable subgoals as waypoints, preferring states that more easily lead to the final goal. Additionally, we learn state-goal value functions to encourage efficient subgoal reaching. These two components naturally integrate into the off-policy actor-critic framework, enabling efficient goal attainment through informative exploration. We evaluate our method on complex robotic navigation and manipulation tasks, demonstrating a significant performance advantage over existing methods. Our ablation study further shows that our method is robust to observation data with various corruptions.

Many stages of the robotic lifecycle, from morphology synthesis to operation, rely fundamentally on the reachable workspace. However, current methods for approximating workspaces are slow, imprecise, or tied to a single morphology. We introduce Reachability Across Morphologies (RAM): a morphology-conditioned, implicit neural representation that acts as a fast, differentiable surrogate for pose reachability, generalising to unseen morphologies while inherently accounting for self-collisions. To train RAM, we publish a large-scale dataset of 3cdot10^{10} samples generated solely from forward kinematics. Experiments show that our model achieves an F_1-score of 86% at nanosecond inference, outperforming the baseline by 14% while reducing inference time by three orders of magnitude. We further demonstrate speed-ups of one and two orders of magnitude for gradient-based morphology and trajectory optimisation, respectively. Website: https://timwalter.github.io/ram.

Video-based manipulation provides object-centric motion priors from human demonstrations, generated videos, or RGB-D observations, but such priors are typically embodiment-agnostic and cannot be directly executed by a specific robot. This paper presents PhysV2A, a reachability-gated and semantic-mask-constrained feasibility-completion framework for converting video-derived 6D object motion into robot-executable manipulation trajectories. The key idea is to treat grasp feasibility as trajectory-conditioned rather than local: each RGB-D-generated 6-DoF grasp candidate is rigidly coupled with the recovered object motion to form a grasp-conditioned TCP trajectory hypothesis. PhysV2A then performs hierarchical reachability-gated selection, where infeasible grasp--trajectory pairs are rejected by robot-centric kinematic checks and surviving candidates are ranked by downstream execution suitability. For the selected reachable trajectory, a VLM-assisted and rule-validated S-Mask identifies task-critical and relaxable Cartesian components, enabling semantic-mask-constrained manipulability refinement through redundancy-first optimization and bounded Cartesian relaxation. Real-robot experiments on four tabletop manipulation tasks show that PhysV2A improves task success over representative video-prior and IK-only baselines, reduces kinematic-feasibility failures, and produces better-conditioned trajectories with bounded semantic deviations.

Long-horizon agents can fail even when their underlying models can solve the constituent steps. They may lose track of mutable state, fail to reactivate lessons from earlier executions, skip known procedures, or stop prematurely. We bet on harness scaling to improve the execution system around an agent without changing its model weights. We introduce StateM, an agent-native runtime that organizes execution around durable states, phase-local context, checked transitions, recoverable runbooks, and versioned procedural practices that agents and users can inspect together. On Terminal-Bench 2.1, StateM raises GPT-5.5 xhigh to 92.1\%, versus 83.1\% reference and GPT-5.6 Sol Ultra at 91.9\%. The runbook transfers unchanged to GPT-5.6. With GPT-5.6 Sol xhigh, StateM reaches 95.3\% raw accuracy across 445 trials and succeeds on all 89 tasks at least once. The frozen profile raises GPT-5.6 Luna from 76.7 to 85.4\%, above the 84.9\% Sol xhigh reference. Using the same runtime, runbook structure, and golden rules, less than \38 of adaptation raises DeepSeek-V4 Flash from 82.7 to 88.1% under standard timeouts and to 89.1% on an 88-task common core. Extending only the remaining latency-sensitive task matches the reported 88.8% GPT-5.6 Sol max result. Final-score API usage is about 15 versus \574.68 for the GPT reference; total DeepSeek expenditure is 52.22. On BusinessBench, family-specific runbooks built on development sets yield held-out gains of 0.55 macro and 1.34 micro points; two mechanism-matched families improve by 10.04 points. Concrete rules generalize when tasks share execution structure, while the control methodology applies broadly. StateM turns selected postmortem findings into persistent, executable preconditions and practices, making learned controls explicit and enforceable through stateful controls. Code at github.com/henryqin1997/statem.

Safety heads are lightweight classifiers attached to pretrained language models for flagging harmful inputs before generation. Their empirical detection performance has been studied, but their formal robustness properties remain largely unexplored. We ask when a State Space Model (SSM)-based safety head can be certified to produce the same prediction for all inputs within a bounded embedding-space perturbation. We prove that the answer turns on a single condition: the l_infty norm of the state transition matrix must satisfy A_infty<1 (the contraction condition), which enables exact interval bound propagation (IBP) certification for linear time-invariant classifiers. When the contraction condition holds, the reachable output interval has bounded steady-state width and examples can be certified as robustly classified. When it fails, the interval grows exponentially with sequence length and certification is impossible at any practical perturbation radius. We enforce contraction with a hinge penalty and show on toxic comment data that certified fraction improves from 41\% to 59\%, with a sharp empirical phase transition at A_infty=1 matching the theory. Applying a contraction-regularized S4 head to jailbreak detection on JailbreakBench, we achieve a zero-shot transfer to AdvBench (DR=0.994) and HarmBench (DR=0.988). A logistic regression on mean-pooled Mamba-130M embeddings matches or exceeds the S4 head on every detection metric, confirming that harmful intent is already linearly separable in the embedding space. The S4 safety head's contribution is not superior discrimination but the formal certification that no probe-based approach provides.

The BigCode project is an open-scientific collaboration working on the responsible development of large language models for code. This tech report describes the progress of the collaboration until December 2022, outlining the current state of the Personally Identifiable Information (PII) redaction pipeline, the experiments conducted to de-risk the model architecture, and the experiments investigating better preprocessing methods for the training data. We train 1.1B parameter models on the Java, JavaScript, and Python subsets of The Stack and evaluate them on the MultiPL-E text-to-code benchmark. We find that more aggressive filtering of near-duplicates can further boost performance and, surprisingly, that selecting files from repositories with 5+ GitHub stars deteriorates performance significantly. Our best model outperforms previous open-source multilingual code generation models (InCoder-6.7B and CodeGen-Multi-2.7B) in both left-to-right generation and infilling on the Java, JavaScript, and Python portions of MultiPL-E, despite being a substantially smaller model. All models are released under an OpenRAIL license at https://hf.co/bigcode.

We present FIT: a transformer-based architecture with efficient self-attention and adaptive computation. Unlike original transformers, which operate on a single sequence of data tokens, we divide the data tokens into groups, with each group being a shorter sequence of tokens. We employ two types of transformer layers: local layers operate on data tokens within each group, while global layers operate on a smaller set of introduced latent tokens. These layers, comprising the same set of self-attention and feed-forward layers as standard transformers, are interleaved, and cross-attention is used to facilitate information exchange between data and latent tokens within the same group. The attention complexity is O(n^2) locally within each group of size n, but can reach O(L^{{4}/{3}}) globally for sequence length of L. The efficiency can be further enhanced by relying more on global layers that perform adaptive computation using a smaller set of latent tokens. FIT is a versatile architecture and can function as an encoder, diffusion decoder, or autoregressive decoder. We provide initial evidence demonstrating its effectiveness in high-resolution image understanding and generation tasks. Notably, FIT exhibits potential in performing end-to-end training on gigabit-scale data, such as 6400times6400 images, or 160K tokens (after patch tokenization), within a memory capacity of 16GB, without requiring specific optimizations or model parallelism.

Offline reinforcement learning aims to train agents from pre-collected datasets. However, this comes with the added challenge of estimating the value of behaviors not covered in the dataset. Model-based methods offer a potential solution by training an approximate dynamics model, which then allows collection of additional synthetic data via rollouts in this model. The prevailing theory treats this approach as online RL in an approximate dynamics model, and any remaining performance gap is therefore understood as being due to dynamics model errors. In this paper, we analyze this assumption and investigate how popular algorithms perform as the learned dynamics model is improved. In contrast to both intuition and theory, if the learned dynamics model is replaced by the true error-free dynamics, existing model-based methods completely fail. This reveals a key oversight: The theoretical foundations assume sampling of full horizon rollouts in the learned dynamics model; however, in practice, the number of model-rollout steps is aggressively reduced to prevent accumulating errors. We show that this truncation of rollouts results in a set of edge-of-reach states at which we are effectively ``bootstrapping from the void.'' This triggers pathological value overestimation and complete performance collapse. We term this the edge-of-reach problem. Based on this new insight, we fill important gaps in existing theory, and reveal how prior model-based methods are primarily addressing the edge-of-reach problem, rather than model-inaccuracy as claimed. Finally, we propose Reach-Aware Value Learning (RAVL), a simple and robust method that directly addresses the edge-of-reach problem and hence - unlike existing methods - does not fail as the dynamics model is improved. Code open-sourced at: github.com/anyasims/edge-of-reach.

Human motion generation is a challenging task that aims to create realistic motion imitating natural human behaviour. We focus on the well-studied behaviour of priming an object/location for pick up or put down -- that is, the spotting of an object/location from a distance, known as gaze priming, followed by the motion of approaching and reaching the target location. To that end, we curate, for the first time, 23.7K gaze-primed human motion sequences for reaching target object locations from five publicly available datasets, i.e., HD-EPIC, MoGaze, HOT3D, ADT, and GIMO. We pre-train a text-conditioned diffusion-based motion generation model, then fine-tune it conditioned on goal pose or location, on our curated sequences. Importantly, we evaluate the ability of the generated motion to imitate natural human movement through several metrics, including the 'Reach Success' and a newly introduced 'Prime Success' metric. On the largest dataset, HD-EPIC, our model achieves 60% prime success and 89% reach success when conditioned on the goal object location.

Robotic arms are increasingly deployed in uncertain environments, yet conventional control pipelines often become rigid and brittle when exposed to perturbations or incomplete information. Virtual Model Control (VMC) enables compliant behaviors by embedding virtual forces and mapping them into joint torques, but its reliance on fixed parameters and limited coordination among virtual components constrains adaptability and may undermine stability as task objectives evolve. To address these limitations, we propose Adaptive VMC with Large Language Model (LLM)- and Lyapunov-Based Reinforcement Learning (RL), which preserves the physical interpretability of VMC while supporting stability-guaranteed online adaptation. The LLM provides structured priors and high-level reasoning that enhance coordination among virtual components, improve sample efficiency, and facilitate flexible adjustment to varying task requirements. Complementarily, Lyapunov-based RL enforces theoretical stability constraints, ensuring safe and reliable adaptation under uncertainty. Extensive simulations on a 7-DoF Panda arm demonstrate that our approach effectively balances competing objectives in dynamic tasks, achieving superior performance while highlighting the synergistic benefits of LLM guidance and Lyapunov-constrained adaptation.

Recent generative engine optimisation (GEO) research has shown that prompt-injection attacks can push a target product to the top of an LLM's recommendation list, with the strongest attacks reporting around 80% success and raising serious security concerns about RAG-based recommendation. However, these results assume the attacked document is always fed directly to the generator, bypassing the retriever and reranker. This is unrealistic: in deployed RAG systems, the attack modifies the document content, which can in turn change whether the document is retrieved and reranked highly enough to reach the generator at all. In this paper, we re-evaluate seven GEO attacks under a realistic three-stage pipeline (retriever\,to\,LLM reranker\,to\,LLM generator). We find that prior protocols substantially overstate attack effectiveness: gradient-based and instruction override attacks largely collapse before reaching the generator, and only LLM-driven prompt injections remain effective end-to-end. Our analysis further reveals that current GEO attacks are easily detectable: a lightweight prompt-injection guard finetuned on a small attack dataset already detects every attack. Our code and data are available at https://github.com/ielab/geo_injection_rag_survival.

Blind individuals face persistent challenges in last-mile navigation, including locating entrances, identifying obstacles, and navigating complex or cluttered spaces. Although wearable cameras are increasingly used in assistive systems, there has been no systematic, vantage-focused comparison to guide their design. This paper addresses that gap through a two-part investigation. First, we surveyed ten experienced blind cane users, uncovering navigation strategies, pain points, and technology preferences. Participants stressed the importance of multi-sensory integration, destination-focused travel, and assistive tools that complement (rather than replace) the cane's tactile utility. Second, we conducted controlled data collection with a blind participant navigating five real-world environments using synchronized head- and cane-mounted cameras, isolating vantage placement as the primary variable. To assess how each vantage supports spatial perception, we evaluated SLAM performance (for localization and mapping) and NeRF-based 3D reconstruction (for downstream scene understanding). Head-mounted sensors delivered superior localization accuracy, while cane-mounted views offered broader ground-level coverage and richer environmental reconstructions. A combined (head+cane) configuration consistently outperformed both. These results highlight the complementary strengths of different sensor placements and offer actionable guidance for developing hybrid navigation aids that are perceptive, robust, and user-aligned.

Quantum annealing is a promising heuristic for combinatorial optimization, but on current hardware its performance degrades for larger and more complex problems due to noise and small energy gaps. Reverse annealing has been proposed as a refinement strategy, yet it remains unclear when it provides systematic advantages over standard forward annealing or simply increasing annealing time. We find that combining forward and reverse annealing consistently improves solution quality and efficiency across multiple problem classes. The benefits of reverse annealing increase with problem complexity and are strongest in regimes where forward annealing is increasingly limited. Moreover, reverse annealing yields larger efficiency gains than simply extending forward annealing times. We establish these results through a systematic experimental study on a D-Wave Advantage system, benchmarking reverse annealing across Max-Cut, Number Partitioning, and sparse clustering problems while varying reverse distance, pause duration, and annealing time. We identify a narrow optimal regime for reverse annealing parameters linked to the location of freeze-out points and energy-level crossings in the annealing schedule. These findings demonstrate that reverse annealing is most valuable for large, high-complexity optimization problems and is likely to gain importance as quantum annealing hardware scales toward more realistic applications.

Grounded language-model pipelines can be divided into three stages: selecting an object, retrieving passages for it, and using that evidence to answer. If the selected object must reach the reader, losing it breaks the handoff. Benchmark recall checks the dataset-linked object, which can differ. We audit 600 HybridQA questions across three selector families. On 1,463 resolvable records where the selected object matches the dataset-traced passage, exact key lookup and exact title matching return the object every time. With every ranked rule given the same decoded selected title, body-only BM25 omits it on 389 records (26.6%) at cutoff five, while hybrid retrieval with reranking omits it on 14 (1.0%). The two identities differ on 329 of 1,792 resolvable records. With original-question rankings, their top-five checks disagree on 106 records (5.9%). Frozen reader comparisons associate the aligned object's presence with 28.6 to 31.0 points higher exact match. In a deliberately selected 64-item cohort, removing that passage sharply lowers exact match, while removing a similar-length comparison passage does not reproduce the drop. We release the Returned-Object Profile (ROP), an executable record of the target, returned-ID field, cutoff, membership rule, and complete expected population, with data and an offline replay.

Aligned language models gate behaviors such as refusal and language routing through sparse feed forward neurons, yet no theory predicts when a single neuron intervention controls a behavior coherently rather than collapsing the output. We develop a budget normalized control window framework for single neuron steering. A dose along one write direction reduces to one control coordinate: the alignment between the residual stream and the write, driven along a universal saturation curve in units of a coherence budget set by the residual norm divided by the write norm. Coherent control exists when a behavior trigger lies below the collapse ceiling. The same coordinate governs benign mode switches and refusal; the ceiling follows from weights and one generic forward pass, while triggers are measured at rollout. On fifteen held out neurons, the predicted ceiling has mean absolute error 0.14, about 0.07 in bulk layers, and the committed open or closed verdict holds on eleven against a ten of fifteen majority baseline. Closed cases expose three failure modes rather than violations: collapse before trigger, too little depth to propagate, or a normalization that caps how far one neuron can push. The law explains why local gradient attribution anti predicts control: true controllers write off the readout axis and carry a near zero first order gradient. A forward only contrastive screen made precise by the window recovers controllers that attribution misses. On refusal, the hardest case, intervention success is typed, not scalar: coherent bypass and strict actionable reach separate, so a neuron can flip refusal in fluent, on task text with no actionable content, and genuine actionable reach appears only for three of six audited Llama pivots and only at later rollout horizons. Single neuron steering is therefore a budgeted, typed audit of controllability rather than a fixed dose anecdote.

In goal-reaching reinforcement learning (RL), the optimal value function has a particular geometry, called quasimetric structure. This paper introduces Quasimetric Reinforcement Learning (QRL), a new RL method that utilizes quasimetric models to learn optimal value functions. Distinct from prior approaches, the QRL objective is specifically designed for quasimetrics, and provides strong theoretical recovery guarantees. Empirically, we conduct thorough analyses on a discretized MountainCar environment, identifying properties of QRL and its advantages over alternatives. On offline and online goal-reaching benchmarks, QRL also demonstrates improved sample efficiency and performance, across both state-based and image-based observations.

Open-ended learning benefits immensely from the use of symbolic methods for goal representation as they offer ways to structure knowledge for efficient and transferable learning. However, the existing Hierarchical Reinforcement Learning (HRL) approaches relying on symbolic reasoning are often limited as they require a manual goal representation. The challenge in autonomously discovering a symbolic goal representation is that it must preserve critical information, such as the environment dynamics. In this paper, we propose a developmental mechanism for goal discovery via an emergent representation that abstracts (i.e., groups together) sets of environment states that have similar roles in the task. We introduce a Feudal HRL algorithm that concurrently learns both the goal representation and a hierarchical policy. The algorithm uses symbolic reachability analysis for neural networks to approximate the transition relation among sets of states and to refine the goal representation. We evaluate our approach on complex navigation tasks, showing the learned representation is interpretable, transferrable and results in data efficient learning.

State density distribution, in contrast to worst-case reachability, can be leveraged for safety-related problems to better quantify the likelihood of the risk for potentially hazardous situations. In this work, we propose a data-driven method to compute the density distribution of reachable states for nonlinear and even black-box systems. Our semi-supervised approach learns system dynamics and the state density jointly from trajectory data, guided by the fact that the state density evolution follows the Liouville partial differential equation. With the help of neural network reachability tools, our approach can estimate the set of all possible future states as well as their density. Moreover, we could perform online safety verification with probability ranges for unsafe behaviors to occur. We use an extensive set of experiments to show that our learned solution can produce a much more accurate estimate on density distribution, and can quantify risks less conservatively and flexibly comparing with worst-case analysis.

Density of the reachable states can help understand the risk of safety-critical systems, especially in situations when worst-case reachability is too conservative. Recent work provides a data-driven approach to compute the density distribution of autonomous systems' forward reachable states online. In this paper, we study the use of such approach in combination with model predictive control for verifiable safe path planning under uncertainties. We first use the learned density distribution to compute the risk of collision online. If such risk exceeds the acceptable threshold, our method will plan for a new path around the previous trajectory, with the risk of collision below the threshold. Our method is well-suited to handle systems with uncertainties and complicated dynamics as our data-driven approach does not need an analytical form of the systems' dynamics and can estimate forward state density with an arbitrary initial distribution of uncertainties. We design two challenging scenarios (autonomous driving and hovercraft control) for safe motion planning in environments with obstacles under system uncertainties. We first show that our density estimation approach can reach a similar accuracy as the Monte-Carlo-based method while using only 0.01X training samples. By leveraging the estimated risk, our algorithm achieves the highest success rate in goal reaching when enforcing the safety rate above 0.99.

Understanding the environment and a robot's physical reachability is crucial for task execution. While state-of-the-art vision-language models (VLMs) excel in environmental perception, they often generate inaccurate or impractical responses in embodied visual reasoning tasks due to a lack of understanding of robotic physical reachability. To address this issue, we propose a unified representation of physical reachability across diverse robots, i.e., Space-Physical Reachability Map (S-P Map), and PhysVLM, a vision-language model that integrates this reachability information into visual reasoning. Specifically, the S-P Map abstracts a robot's physical reachability into a generalized spatial representation, independent of specific robot configurations, allowing the model to focus on reachability features rather than robot-specific parameters. Subsequently, PhysVLM extends traditional VLM architectures by incorporating an additional feature encoder to process the S-P Map, enabling the model to reason about physical reachability without compromising its general vision-language capabilities. To train and evaluate PhysVLM, we constructed a large-scale multi-robot dataset, Phys100K, and a challenging benchmark, EQA-phys, which includes tasks for six different robots in both simulated and real-world environments. Experimental results demonstrate that PhysVLM outperforms existing models, achieving a 14\% improvement over GPT-4o on EQA-phys and surpassing advanced embodied VLMs such as RoboMamba and SpatialVLM on the RoboVQA-val and OpenEQA benchmarks. Additionally, the S-P Map shows strong compatibility with various VLMs, and its integration into GPT-4o-mini yields a 7.1\% performance improvement.

Humans possess a large reachable space in the 3D world, enabling interaction with objects at varying heights and distances. However, realizing such large-space reaching on humanoids is a complex whole-body control problem and requires the robot to master diverse skills simultaneously-including base positioning and reorientation, height and body posture adjustments, and end-effector pose control. Learning from scratch often leads to optimization difficulty and poor sim2real transferability. To address this challenge, we propose Real-world-Ready Skill Space (R2S2). Our approach begins with a carefully designed skill library consisting of real-world-ready primitive skills. We ensure optimal performance and robust sim2real transfer through individual skill tuning and sim2real evaluation. These skills are then ensembled into a unified latent space, serving as a structured prior that helps task execution in an efficient and sim2real transferable manner. A high-level planner, trained to sample skills from this space, enables the robot to accomplish real-world goal-reaching tasks. We demonstrate zero-shot sim2real transfer and validate R2S2 in multiple challenging goal-reaching scenarios.

Time-Optimal Path Parameterization (TOPP) is a well-studied problem in robotics and has a wide range of applications. There are two main families of methods to address TOPP: Numerical Integration (NI) and Convex Optimization (CO). NI-based methods are fast but difficult to implement and suffer from robustness issues, while CO-based approaches are more robust but at the same time significantly slower. Here we propose a new approach to TOPP based on Reachability Analysis (RA). The key insight is to recursively compute reachable and controllable sets at discretized positions on the path by solving small Linear Programs (LPs). The resulting algorithm is faster than NI-based methods and as robust as CO-based ones (100% success rate), as confirmed by extensive numerical evaluations. Moreover, the proposed approach offers unique additional benefits: Admissible Velocity Propagation and robustness to parametric uncertainty can be derived from it in a simple and natural way.

High-Level Synthesis (HLS) design space exploration (DSE) seeks Pareto-optimal designs within expansive pragma configuration spaces. To accelerate HLS DSE, graph neural networks (GNNs) are commonly employed as surrogates for HLS tools to predict quality of results (QoR) metrics, while multi-objective optimization algorithms expedite the exploration. However, GNN-based prediction methods may not fully capture the rich semantic features inherent in behavioral descriptions, and conventional multi-objective optimization algorithms often do not explicitly account for the domain-specific knowledge regarding how pragma directives influence QoR. To address these limitations, this paper proposes the MPM-LLM4DSE framework, which incorporates a multimodal prediction model (MPM) that simultaneously fuses features from behavioral descriptions and control and data flow graphs. Furthermore, the framework employs a large language model (LLM) as an optimizer, accompanied by a tailored prompt engineering methodology. This methodology incorporates pragma impact analysis on QoR to guide the LLM in generating high-quality configurations (LLM4DSE). Experimental results demonstrate that our multimodal predictive model significantly outperforms state-of-the-art work ProgSG by up to 10.25times. Furthermore, in DSE tasks, the proposed LLM4DSE achieves an average performance gain of 39.90\% over prior methods, validating the effectiveness of our prompting methodology. Code and models are available at https://github.com/wslcccc/MPM-LLM4DSE.

In the same way that the computer vision (CV) and natural language processing (NLP) communities have developed self-supervised methods, reinforcement learning (RL) can be cast as a self-supervised problem: learning to reach any goal, without requiring human-specified rewards or labels. However, actually building a self-supervised foundation for RL faces some important challenges. Building on prior contrastive approaches to this RL problem, we conduct careful ablation experiments and discover that a shallow and wide architecture, combined with careful weight initialization and data augmentation, can significantly boost the performance of these contrastive RL approaches on challenging simulated benchmarks. Additionally, we demonstrate that, with these design decisions, contrastive approaches can solve real-world robotic manipulation tasks, with tasks being specified by a single goal image provided after training.

Address translation is a performance bottleneck in data-intensive workloads due to large datasets and irregular access patterns that lead to frequent high-latency page table walks (PTWs). PTWs can be reduced by using (i) large hardware TLBs or (ii) large software-managed TLBs. Unfortunately, both solutions have significant drawbacks: increased access latency, power and area (for hardware TLBs), and costly memory accesses, the need for large contiguous memory blocks, and complex OS modifications (for software-managed TLBs). We present Victima, a new software-transparent mechanism that drastically increases the translation reach of the processor by leveraging the underutilized resources of the cache hierarchy. The key idea of Victima is to repurpose L2 cache blocks to store clusters of TLB entries, thereby providing an additional low-latency and high-capacity component that backs up the last-level TLB and thus reduces PTWs. Victima has two main components. First, a PTW cost predictor (PTW-CP) identifies costly-to-translate addresses based on the frequency and cost of the PTWs they lead to. Second, a TLB-aware cache replacement policy prioritizes keeping TLB entries in the cache hierarchy by considering (i) the translation pressure (e.g., last-level TLB miss rate) and (ii) the reuse characteristics of the TLB entries. Our evaluation results show that in native (virtualized) execution environments Victima improves average end-to-end application performance by 7.4% (28.7%) over the baseline four-level radix-tree-based page table design and by 6.2% (20.1%) over a state-of-the-art software-managed TLB, across 11 diverse data-intensive workloads. Victima (i) is effective in both native and virtualized environments, (ii) is completely transparent to application and system software, and (iii) incurs very small area and power overheads on a modern high-end CPU.

Humans can reproduce the viewpoint specified by a target image through active head and body motion, yet spatial intelligence in foundation models has largely been studied as passive understanding of pre-collected observations. We introduce Target Viewpoint Reproduction (TVR) -- an active task where an agent adjusts its viewpoint in a 3D environment until its observation matches a given target image -- and TVRBench, an indoor-simulation benchmark spanning scene scale and target-view visual richness. TVR is far from solved: on the evaluation split, the strongest open-source and closed-source models reach only 7.8% and 12.0% success. Fine-grained analysis identifies two consistent bottlenecks: off-the-shelf models struggle with multi-turn visual history, and performance drops sharply when viewpoint reproduction requires body translation rather than in-place rotation, exposing a gap in mapping spatial discrepancies to embodied movement. To study reducing this gap, we build a unified TVR post-training framework covering expert-trajectory SFT, rationale-supervised CoT-SFT, offline Single-turn GRPO, and on-policy Multi-turn GRPO from live simulator rollouts. Visual-action SFT supplies the main gain, raising a 9B open-source model to 50.8% success; Multi-turn GRPO provides targeted multi-room refinement and reaches 51.4% overall, while CoT supervision and Single-turn GRPO degrade closed-loop performance. These results establish TVRBench as a testbed for measuring and training foundation models that actively perceive and act in 3D environments. Our code, data, and models are available at https://github.com/aim-uofa/TVRBench.

Dexterous manipulation with multi-fingered hands is the next frontier of robotics, yet learned hand skills remain limited to simple grasps or basic repeated motions, such as rotating an object. As robots attempt more demanding in-hand maneuvers, safety, such as not dropping the object, becomes critical, yet it is rarely measured. We study in-hand object pose reaching, a task that demands diverse and difficult grasps: moving an object to almost any position and orientation within reach of the fingers, at any wrist orientation, through long sequences of consecutive goals. We present a recipe for training such policies for a LEAP hand in simulation without human data, built on a range of insights, from diverse resets and goals via generated grasp datasets to an adaptive friction curriculum. With careful system identification, the policies transfer zero-shot to the real hand, using either motion capture or a single wrist-mounted depth camera, and prove remarkably capable and robust. On top of the task policy, we add a learned residual safety filter with adjustable conservativeness, letting us tune the balance between performance and safety and greatly reduce object drops. In 13.3 hours of real-robot evaluation over 4,800 unseen goals across 4 objects and diverse wrist orientations, the state-based policy reaches 95.2% of goals within 2 cm and 0.4 rad, and the filter cuts its drops by 75% while still reaching 91.5% of goals. The policies can also spin a lightbulb held in an arbitrary pose, reach out-of-distribution goals, withstand fast arm motion and perturbations, and, needing only a wrist camera, serve as portable skills such as screwing in a lightbulb. We release the full recipe as a platform for studying performance, reliability, and safety in high-dimensional dexterous systems. Videos and more are available at https://ian-chuang.github.io/dexsafe/.

Machine learning models are often used to decide who will receive a loan, a job interview, or a public benefit. Standard techniques to build these models use features about people but overlook their actionability. In turn, models can assign predictions that are fixed, meaning that consumers who are denied loans, interviews, or benefits may be permanently locked out from access to credit, employment, or assistance. In this work, we introduce a formal testing procedure to flag models that assign fixed predictions that we call recourse verification. We develop machinery to reliably determine if a given model can provide recourse to its decision subjects from a set of user-specified actionability constraints. We demonstrate how our tools can ensure recourse and adversarial robustness in real-world datasets and use them to study the infeasibility of recourse in real-world lending datasets. Our results highlight how models can inadvertently assign fixed predictions that permanently bar access, and we provide tools to design algorithms that account for actionability when developing models.

Performing Reinforcement Learning in sparse rewards settings, with very little prior knowledge, is a challenging problem since there is no signal to properly guide the learning process. In such situations, a good search strategy is fundamental. At the same time, not having to adapt the algorithm to every single problem is very desirable. Here we introduce TAXONS, a Task Agnostic eXploration of Outcome spaces through Novelty and Surprise algorithm. Based on a population-based divergent-search approach, it learns a set of diverse policies directly from high-dimensional observations, without any task-specific information. TAXONS builds a repertoire of policies while training an autoencoder on the high-dimensional observation of the final state of the system to build a low-dimensional outcome space. The learned outcome space, combined with the reconstruction error, is used to drive the search for new policies. Results show that TAXONS can find a diverse set of controllers, covering a good part of the ground-truth outcome space, while having no information about such space.

The deployment of Large Language Models (LLMs) in robotic systems presents unique safety challenges, particularly in unpredictable environments. Although LLMs, leveraging zero-shot learning, enhance human-robot interaction and decision-making capabilities, their inherent probabilistic nature and lack of formal guarantees raise significant concerns for safety-critical applications. Traditional model-based verification approaches often rely on precise system models, which are difficult to obtain for real-world robotic systems and may not be fully trusted due to modeling inaccuracies, unmodeled dynamics, or environmental uncertainties. To address these challenges, this paper introduces a safety assurance framework for LLM-controlled robots based on data-driven reachability analysis, a formal verification technique that ensures all possible system trajectories remain within safe operational limits. Our framework specifically investigates the problem of instructing an LLM to navigate the robot to a specified goal and assesses its ability to generate low-level control actions that successfully guide the robot safely toward that goal. By leveraging historical data to construct reachable sets of states for the robot-LLM system, our approach provides rigorous safety guarantees against unsafe behaviors without relying on explicit analytical models. We validate the framework through experimental case studies in autonomous navigation and task planning, demonstrating its effectiveness in mitigating risks associated with LLM-generated commands. This work advances the integration of formal methods into LLM-based robotics, offering a principled and practical approach to ensuring safety in next-generation autonomous systems.

Modern Large Language Models (LLMs) are often criticized for producing repetitive and homogeneous text, despite possessing vast latent vocabularies. While previous research has focused on model knowledge and training data, we investigate the role of decoding mechanics in suppressing linguistic diversity. We introduce the Word Coverage Score (WCS), a metric that quantifies the extent to which contextually appropriate human vocabulary is mathematically pruned by standard sampling filters (e.g., Top-p, Top-k, and Min-p). Rather than assessing static knowledge, the WCS measures the lexical survival rate of low-frequency, high-information human words as a function of sampling parameters. By auditing open-weight models on human-authored corpus fragments, we identify which logical lexical choices are rendered unreachable by the decoder, even when they reside within the probability space. Our results provide quantitative evidence that industry-standard sampling defaults act as unintended censorship mechanisms, smoothing the unique textures of human expression into a homogenized discourse. The WCS offers a rigorous framework for optimizing the trade-off between text coherence and lexical richness, providing a diagnostic tool for preserving the diversity of human language in generative models.

Legged robots face significant challenges in navigating complex environments, as they require precise real-time decisions for foothold selection and contact planning. While existing research has explored methods to select footholds based on terrain geometry or kinematics, a critical gap remains: few existing methods efficiently validate the existence of a non-collision swing trajectory. This paper addresses this gap by introducing KCFRC, a novel approach for efficient foothold reachability analysis. We first formally define the foothold reachability problem and establish a sufficient condition for foothold reachability. Based on this condition, we develop the KCFRC algorithm, which enables robots to validate foothold reachability in real time. Our experimental results demonstrate that KCFRC achieves remarkable time efficiency, completing foothold reachability checks for a single leg across 900 potential footholds in an average of 2 ms. Furthermore, we show that KCFRC can accelerate trajectory optimization and is particularly beneficial for contact planning in confined spaces, enhancing the adaptability and robustness of legged robots in challenging environments.

Reinforcement learning has been central to recent advances in large language model reasoning, but most algorithms rely on on-policy training that demands fresh rollouts at every update, limiting efficiency and scalability. Asynchronous RL systems alleviate this by decoupling rollout generation from training, yet their effectiveness hinges on tolerating large staleness in rollout data, a setting where existing methods either degrade in performance or collapse. We revisit this challenge and uncover a prosperity-before-collapse phenomenon: stale data can be as informative as on-policy data if exploited properly. Building on this insight, we introduce M2PO (Second-Moment Trust Policy Optimization), which constrains the second moment of importance weights to suppress only extreme outliers while preserving informative updates. Notably, M2PO sharply reduces the fraction of clipped tokens under high staleness (from 1.22% to 0.06% over training), precisely masking high-variance tokens while maintaining stable optimization. Extensive evaluation across six models (from 1.7B to 32B) and eight benchmarks shows that M2PO delivers stable off-policy training even with data stale by at least 256 model updates and matches on-policy performance.

Generative models trained using self-supervision of tokenized electronic health record (EHR) timelines show promise for clinical outcome prediction. This is typically done using Monte Carlo simulation for future patient trajectories. However, existing approaches suffer from three key limitations: sparse estimate distributions that poorly differentiate patient risk levels, extreme computational costs, and high sampling variance. We propose two new estimators: the Sum of Conditional Outcome Probability Estimator (SCOPE) and Risk Estimation from Anticipated Conditional Hazards (REACH), that leverage next-token probability distributions discarded by standard Monte Carlo. We prove both estimators are unbiased and that REACH guarantees variance reduction over Monte Carlo sampling for any model and outcome. Empirically, on hospital mortality prediction in MIMIC-IV using the ETHOS-ARES framework, SCOPE and REACH match 100-sample Monte Carlo performance using only 10-11 samples (95% CI: [9,11]), representing a ~10x reduction in inference cost without degrading calibration. For ICU admission prediction, efficiency gains are more modest (~1.2x), which we attribute to the outcome's lower "spontaneity," a property we characterize theoretically and empirically. These methods substantially improve the feasibility of deploying generative EHR models in resource-constrained clinical settings.

This paper presents a safety-critical approach to the coordination of robots in dynamic environments. To this end, we leverage control barrier functions (CBFs) with the forward reachable set to guarantee the safe coordination of the robots while preserving a desired trajectory via a layered controller. The top-level planner generates a safety-ensured trajectory for each agent, accounting for the dynamic constraints in the environment. This planner leverages high-order CBFs based on the forward reachable set to ensure safety-critical coordination control, i.e., guarantee the safe coordination of the robots during locomotion. The middle-level trajectory planner employs single rigid body (SRB) dynamics to generate optimal ground reaction forces (GRFs) to track the safety-ensured trajectories from the top-level planner. The whole-body motions to adhere to the optimal GRFs while ensuring the friction cone condition at the end of each stance leg are generated from the low-level controller. The effectiveness of the approach is demonstrated through simulation and hardware experiments.

Offline safe reinforcement learning (RL) seeks reward-maximizing policies from static datasets under strict safety constraints. Existing methods often rely on soft expected-cost objectives or iterative generative inference, which can be insufficient for safety-critical real-time control. We propose Safe Flow Q-Learning (SafeFQL), which extends FQL to safe offline RL by combining a Hamilton--Jacobi reachability-inspired safety value function with an efficient one-step flow policy. SafeFQL learns the safety value via a self-consistency Bellman recursion, trains a flow policy by behavioral cloning, and distills it into a one-step actor for reward-maximizing safe action selection without rejection sampling at deployment. To account for finite-data approximation error in the learned safety boundary, we add a conformal prediction calibration step that adjusts the safety threshold and provides finite-sample probabilistic safety coverage. Empirically, SafeFQL trades modestly higher offline training cost for substantially lower inference latency than diffusion-style safe generative baselines, which is advantageous for real-time safety-critical deployment. Across boat navigation, and Safety Gymnasium MuJoCo tasks, SafeFQL matches or exceeds prior offline safe RL performance while substantially reducing constraint violations.

Emotion expression is central to human--robot interaction, yet little is known about how people interpret affect on robots with sparse, non-anthropomorphic expressive capabilities. This study examined how people perceive emotional expressions displayed by Reachy Mini (Pollen Robotics and Hugging Face), a low-degree-of-freedom (low-DoF) robot with a constrained and distinctly non-human expressive repertoire. In an online within-subjects study, 100 participants viewed 10 short video clips of Reachy Mini expressing different emotions and, for each clip, identified the perceived emotion, rated its valence and arousal, and evaluated the robot on social-perception traits. Exact emotion recognition was modest overall and varied considerably across expressions, with anger, sadness, and interest recognized more reliably than emotions such as love, pleasure, shame, and disgust. However, participants were generally more successful at recovering broader affective meaning than exact emotion labels, particularly along valence and arousal dimensions. Emotional expressions also shaped social evaluation, as positive expressions were perceived as warmer and more sociable than negative ones, and animacy varied less across conditions. These findings suggest that even constrained robotic expressions can communicate affective meaning and influence social impressions, positioning Reachy Mini as a useful benchmark for studying affective communication in low-DoF robots.

Operator-learning benchmarks ship as full-precision arrays, and they have grown to terabyte scale. A curator who wants to distribute one has to decide how coarsely to store it. That decision is usually made by fixing a tolerance on the reconstruction error of the stored field. We show that this quantity is measured in the wrong place. It compares the stored field with the original, before any model is trained. What the curator is buying is the accuracy of a model trained on the compressed copy, and the two can disagree: two PDEBench families stored to identical field error differ threefold downstream. A solution operator smooths, so only part of the codec error ever reaches the model's output. That part can be measured. Push a compressed field through a model already trained at full precision, and compare its output against the output on the clean field. The measurement costs forward passes and no training on compressed data. It spans more than two orders of magnitude across six PDE families, and it orders downstream cost where field error does not, inverting 12 of 104 cross-dataset comparisons against field error's 36. Read as a budget, the same curve nominates a storage rate for each dataset. A back-check against trained models finds those rates wrong in both directions by up to a factor of two in stored bits.

We introduce Agents-A1, a 35B Mixture-of-Experts Agentic Model that reaches trillion-parameter-level performance by scaling the agent horizon. We investigate agent-horizon scaling from two perspectives: scaling long-horizon trajectories and scaling heterogeneous agent abilities. To support this goal, we build a long-horizon knowledge-action infrastructure that connects external knowledge, actions, observations, and verifier outcomes, producing agentic trajectories with an average length of 45K tokens. Based on this, we train Agents-A1 with a three-stage recipe. First, we perform full-domain supervised fine-tuning to align the base model with broad agentic behaviors. Second, we train domain-level teacher models to capture specialized expertise in each domain. Third, we propose a multi-teacher domain-routed on-policy distillation with salient vocabulary alignment to improve knowledge transfer efficiency across different domains, unifying six heterogeneous domains into one deployable student model. Agents-A1 achieves strong and broad performance for long-horizon agent benchmarks. Compared with 1T-parameter model such as Kimi-K2.6 and DeepSeek-V4-pro, Agents-A1 achieves leading results on SEAL-0 (56.4), IFBench (80.6), HiPhO (46.4), FrontierScience-Olympiad (79.0), and MolBench-Bind (56.8), and remains highly competitive on SciCode (44.3), HLE (47.6) and BrowseComp (75.5). We hope this work provides the community with a practical path for scaling the horizon using a 35B agent that can reach or match the performance of 1T models on long-horizon tasks.

During the COVID-19 pandemic, a significant effort has gone into developing ML-driven epidemic forecasting techniques. However, benchmarks do not exist to claim if a new AI/ML technique is better than the existing ones. The "covid-forecast-hub" is a collection of more than 30 teams, including us, that submit their forecasts weekly to the CDC. It is not possible to declare whether one method is better than the other using those forecasts because each team's submission may correspond to different techniques over the period and involve human interventions as the teams are continuously changing/tuning their approach. Such forecasts may be considered "human-expert" forecasts and do not qualify as AI/ML approaches, although they can be used as an indicator of human expert performance. We are interested in supporting AI/ML research in epidemic forecasting which can lead to scalable forecasting without human intervention. Which modeling technique, learning strategy, and data pre-processing technique work well for epidemic forecasting is still an open problem. To help advance the state-of-the-art AI/ML applied to epidemiology, a benchmark with a collection of performance points is needed and the current "state-of-the-art" techniques need to be identified. We propose EpiBench a platform consisting of community-driven benchmarks for AI/ML applied to epidemic forecasting to standardize the challenge with a uniform evaluation protocol. In this paper, we introduce a prototype of EpiBench which is currently running and accepting submissions for the task of forecasting COVID-19 cases and deaths in the US states and We demonstrate that we can utilize the prototype to develop an ensemble relying on fully automated epidemic forecasts (no human intervention) that reaches human-expert level ensemble currently being used by the CDC.

Scaling up self-supervised learning has driven breakthroughs in language and vision, yet comparable progress has remained elusive in reinforcement learning (RL). In this paper, we study building blocks for self-supervised RL that unlock substantial improvements in scalability, with network depth serving as a critical factor. Whereas most RL papers in recent years have relied on shallow architectures (around 2 - 5 layers), we demonstrate that increasing the depth up to 1024 layers can significantly boost performance. Our experiments are conducted in an unsupervised goal-conditioned setting, where no demonstrations or rewards are provided, so an agent must explore (from scratch) and learn how to maximize the likelihood of reaching commanded goals. Evaluated on simulated locomotion and manipulation tasks, our approach increases performance on the self-supervised contrastive RL algorithm by 2times - 50times, outperforming other goal-conditioned baselines. Increasing the model depth not only increases success rates but also qualitatively changes the behaviors learned. The project webpage and code can be found here: https://wang-kevin3290.github.io/scaling-crl/.

Most automated driving functions are designed for a specific task or vehicle. Most often, the underlying architecture is fixed to specific algorithms to increase performance. Therefore, it is not possible to deploy new modules and algorithms easily. In this paper, we present our automated driving stack which combines both scalability and adaptability. Due to the modular design, our stack allows for a fast integration and testing of novel and state-of-the-art research approaches. Furthermore, it is flexible to be used for our different testing vehicles, including modified EasyMile EZ10 shuttles and different passenger cars. These vehicles differ in multiple ways, e.g. sensor setups, control systems, maximum speed, or steering angle limitations. Finally, our stack is deployed in real world environments, including passenger transport in urban areas. Our stack includes all components needed for operating an autonomous vehicle, including localization, perception, planning, controller, and additional safety modules. Our stack is developed, tested, and evaluated in real world traffic in multiple test sites, including the Test Area Autonomous Driving Baden-W\"urttemberg.

This paper presents an eight-week observational comparison of 68 single-file HTML generations collected across 17 public experiments in the "HTML AI Battle" project between December 10, 2025 and February 4, 2026. Four reasoning model families, GPT, Gemini, Grok, and Claude, were compared under a fixed public-interface protocol with no custom instructions, no personality tuning, and no repair prompts. Each output was evaluated from a rendered browser video using human scores and a Gemini LLM-as-a-judge layer for prompt adherence, functional correctness, and UI quality, then packaged into a standardized social-media protocol spanning X (Twitter), TikTok, and YouTube. The tracker was also used for two supervised predictive analyses: an experiment-level model for 24-hour X impressions and a generation-level model for HTML verbosity. Under this protocol, Claude was the strongest and most consistent family, leading mean performance and winning 9/17 prompts under the primary human weighted score. Longer measured reasoning time was not associated with higher quality overall. Gemini as a judge was significantly more lenient than the human evaluator on functional correctness and overall performance, while stable self-favoring bias remained unresolved. The exploratory X-impressions model remained weak under post-screen cross-validation (MAE = 46,874, R^2 = -0.377), whereas the HTML-lines model performed better, with a model-family-only baseline outperforming prompt-aware alternatives (MAE = 135.2, R^2 = 0.576). Overall, selected pre-publication technical/audio variables were not sufficient to predict 24-hour X reach, while code verbosity was driven much more by model family than by prompt wording. The comparisons remain observational and are limited by public-interface drift, access-path differences, and one primary human scorer.

Vision-language models are known to encode spatial information in their hidden states, yet often fail to use it when answering. However, it remains unclear when and where this encoded information reaches the answer. We address this with direction patching, a class-conditioned causal intervention applied across layers, token positions, and prompt formats. Using spatial-ID directions constructed following prior encoding evidence, we find that causal influence on answer logits emerges only at mid-to-deep depths. Text chain-of-thought suppresses immediate object-word argmax-level transport in most models, while visually grounded prompts keep it open. Positive target-logit gain can remain below the argmax threshold, and transport can re-emerge at the final prefix token or at the answer step in deeper layers. Across the ten VLMs we study, these local effects form descriptive transport patterns. Complementary experiments characterize how these patterns shift across datasets, attributes, and encoding amplitudes. Together, these results reframe the encoding-grounding gap as a problem of conditional transport in VLMs.

The Second Planck Catalogue of Compact Sources is a catalogue of sources detected in single-frequency maps from the full duration of the Planck mission and supersedes previous versions of the Planck compact source catalogues. It consists of compact sources, both Galactic and extragalactic, detected over the entire sky. Compact sources detected in the lower frequency channels are assigned to the PCCS2, while at higher frequencies they are assigned to one of two sub-catalogues, the PCCS2 or PCCS2E, depending on their location on the sky. The first of these catalogues covers most of the sky and allows the user to produce subsamples at higher reliabilities than the target 80% integral reliability of the catalogue. The PCCS2E contains sources detected in sky regions where the diffuse emission makes it difficult to quantify the reliability of the detections. Both the PCCS2 and PCCS2E include polarization measurements, in the form of polarized flux densities, or upper limits, and orientation angles for all seven polarization-sensitive Planck channels. The improved data-processing of the full-mission maps and their reduced noise levels allow us to increase the number of objects in the catalogue, improving its completeness for the target 80 % reliability as compared with the previous versions, the PCCS and ERCSC catalogues.