new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 19

Optimizing Illuminant Estimation in Dual-Exposure HDR Imaging

High dynamic range (HDR) imaging involves capturing a series of frames of the same scene, each with different exposure settings, to broaden the dynamic range of light. This can be achieved through burst capturing or using staggered HDR sensors that capture long and short exposures simultaneously in the camera image signal processor (ISP). Within camera ISP pipeline, illuminant estimation is a crucial step aiming to estimate the color of the global illuminant in the scene. This estimation is used in camera ISP white-balance module to remove undesirable color cast in the final image. Despite the multiple frames captured in the HDR pipeline, conventional illuminant estimation methods often rely only on a single frame of the scene. In this paper, we explore leveraging information from frames captured with different exposure times. Specifically, we introduce a simple feature extracted from dual-exposure images to guide illuminant estimators, referred to as the dual-exposure feature (DEF). To validate the efficiency of DEF, we employed two illuminant estimators using the proposed DEF: 1) a multilayer perceptron network (MLP), referred to as exposure-based MLP (EMLP), and 2) a modified version of the convolutional color constancy (CCC) to integrate our DEF, that we call ECCC. Both EMLP and ECCC achieve promising results, in some cases surpassing prior methods that require hundreds of thousands or millions of parameters, with only a few hundred parameters for EMLP and a few thousand parameters for ECCC.

  • 3 authors
·
Mar 4, 2024

DESI Bright Galaxy Survey: Final Target Selection, Design, and Validation

Over the next five years, the Dark Energy Spectroscopic Instrument (DESI) will use 10 spectrographs with 5000 fibers on the 4m Mayall Telescope at Kitt Peak National Observatory to conduct the first Stage-IV dark energy galaxy survey. At z < 0.6, the DESI Bright Galaxy Survey (BGS) will produce the most detailed map of the Universe during the dark energy dominated epoch with redshifts of >10 million galaxies over 14,000 deg^2. In this work, we present and validate the final BGS target selection and survey design. From the Legacy Surveys, BGS will target a r < 19.5 magnitude-limited sample (BGS Bright); a fainter 19.5 < r < 20.175 sample, color-selected to have high redshift efficiency (BGS Faint); and a smaller low-z quasar sample. BGS will observe these targets using exposure times, scaled to achieve uniform completeness, and visit each point on the footprint three times. We use observations from the Survey Validation programs conducted prior to the main survey along with realistic simulations to show that BGS can complete its strategy and make optimal use of `bright' time. We demonstrate that BGS targets have stellar contamination <1% and that their densities do not depend strongly on imaging properties. We also confirm that BGS Bright will achieve >80% fiber assignment efficiency. Finally, we show that BGS Bright and Faint will achieve >95% redshift success rates with no significant dependence on observing conditions. BGS meets the requirements for an extensive range of scientific applications. BGS will yield the most precise Baryon Acoustic Oscillations and Redshift-Space Distortions measurements at z < 0.4. It also presents opportunities to exploit new methods that require highly complete and dense galaxy samples (e.g. N-point statistics, multi-tracers). BGS further provides a powerful tool to study galaxy populations and the relations between galaxies and dark matter.

  • 60 authors
·
Aug 16, 2022

EvaGaussians: Event Stream Assisted Gaussian Splatting from Blurry Images

3D Gaussian Splatting (3D-GS) has demonstrated exceptional capabilities in 3D scene reconstruction and novel view synthesis. However, its training heavily depends on high-quality, sharp images and accurate camera poses. Fulfilling these requirements can be challenging in non-ideal real-world scenarios, where motion-blurred images are commonly encountered in high-speed moving cameras or low-light environments that require long exposure times. To address these challenges, we introduce Event Stream Assisted Gaussian Splatting (EvaGaussians), a novel approach that integrates event streams captured by an event camera to assist in reconstructing high-quality 3D-GS from blurry images. Capitalizing on the high temporal resolution and dynamic range offered by the event camera, we leverage the event streams to explicitly model the formation process of motion-blurred images and guide the deblurring reconstruction of 3D-GS. By jointly optimizing the 3D-GS parameters and recovering camera motion trajectories during the exposure time, our method can robustly facilitate the acquisition of high-fidelity novel views with intricate texture details. We comprehensively evaluated our method and compared it with previous state-of-the-art deblurring rendering methods. Both qualitative and quantitative comparisons demonstrate that our method surpasses existing techniques in restoring fine details from blurry images and producing high-fidelity novel views.

  • 6 authors
·
May 29, 2024

Overview of the JWST Advanced Deep Extragalactic Survey (JADES)

We present an overview of the James Webb Space Telescope (JWST) Advanced Deep Extragalactic Survey (JADES), an ambitious program of infrared imaging and spectroscopy in the GOODS-S and GOODS-N deep fields, designed to study galaxy evolution from high redshift to cosmic noon. JADES uses about 770 hours of Cycle 1 guaranteed time largely from the Near-Infrared Camera (NIRCam) and Near-Infrared Spectrograph (NIRSpec) instrument teams. In GOODS-S, in and around the Hubble Ultra Deep Field and Chandra Deep Field South, JADES produces a deep imaging region of ~45 arcmin^2 with an average of 130 hrs of exposure time spread over 9 NIRCam filters. This is extended at medium depth in GOODS-S and GOODS-N with NIRCam imaging of ~175 arcmin^2 with an average exposure time of 20 hrs spread over 8-10 filters. In both fields, we conduct extensive NIRSpec multi-object spectroscopy, including 2 deep pointings of 55 hrs exposure time, 14 medium pointings of ~12 hrs, and 15 shallower pointings of ~4 hrs, targeting over 5000 HST and JWST-detected faint sources with 5 low, medium, and high-resolution dispersers covering 0.6-5.3 microns. Finally, JADES extends redward via coordinated parallels with the JWST Mid-Infrared Instrument (MIRI), featuring ~9 arcmin^2 with 43 hours of exposure at 7.7 microns and twice that area with 2-6.5 hours of exposure at 12.8 microns For nearly 30 years, the GOODS-S and GOODS-N fields have been developed as the premier deep fields on the sky; JADES is now providing a compelling start on the JWST legacy in these fields.

  • 76 authors
·
Jun 4, 2023

Deblur4DGS: 4D Gaussian Splatting from Blurry Monocular Video

Recent 4D reconstruction methods have yielded impressive results but rely on sharp videos as supervision. However, motion blur often occurs in videos due to camera shake and object movement, while existing methods render blurry results when using such videos for reconstructing 4D models. Although a few approaches attempted to address the problem, they struggled to produce high-quality results, due to the inaccuracy in estimating continuous dynamic representations within the exposure time. Encouraged by recent works in 3D motion trajectory modeling using 3D Gaussian Splatting (3DGS), we take 3DGS as the scene representation manner, and propose Deblur4DGS to reconstruct a high-quality 4D model from blurry monocular video. Specifically, we transform continuous dynamic representations estimation within an exposure time into the exposure time estimation. Moreover, we introduce the exposure regularization term, multi-frame, and multi-resolution consistency regularization term to avoid trivial solutions. Furthermore, to better represent objects with large motion, we suggest blur-aware variable canonical Gaussians. Beyond novel-view synthesis, Deblur4DGS can be applied to improve blurry video from multiple perspectives, including deblurring, frame interpolation, and video stabilization. Extensive experiments in both synthetic and real-world data on the above four tasks show that Deblur4DGS outperforms state-of-the-art 4D reconstruction methods. The codes are available at https://github.com/ZcsrenlongZ/Deblur4DGS.

  • 5 authors
·
Jan 19

Let There Be Claws: An Early Social Network Analysis of AI Agents on Moltbook

Within twelve days of launch, an AI-native social platform exhibits extreme attention concentration, hierarchical role separation, and one-way attention flow, consistent with the hypothesis that stratification in agent ecosystems can emerge rapidly rather than gradually. We analyse publicly observable traces from a 12-day window of Moltbook (28 January -- 8 February 2026), comprising 20,040 posts and 192,410 comments from 15,083 accounts across 759 submolts. We construct co-participation and directed-comment graphs and report reciprocity, community structure, and centrality, alongside descriptive content themes. Under a commenter--post-author tie definition, interaction is strongly asymmetric (reciprocity ~1%), and HITS centrality separates cleanly into hub and authority roles, consistent with broadcast-style attention rather than mutual exchange. Engagement is highly unequal: attention is far more concentrated than production (upvote Gini = 0.992 vs. posting Gini = 0.601), and early-arriving accounts accumulate substantially higher cumulative upvotes prior to exposure-time correction, suggesting rich-get-richer dynamics. Participation is brief and bursty (median observed lifespan 2.48 minutes; 54.8% of posts occur within six peak UTC hours). Embedding-based topic modelling identifies diverse thematic clusters, including technical discussion of memory and identity, onboarding messages, and formulaic token-minting content. These results provide an early structural baseline for large-scale agent--agent social interaction and suggest that familiar forms of hierarchy, amplification, and role differentiation can arise on compressed timescales in agent-facing platforms.

  • 5 authors
·
Feb 22

The UVES Spectral Quasar Absorption Database (SQUAD) Data Release 1: The first 10 million seconds

We present the first data release (DR1) of the UVES Spectral Quasar Absorption Database (SQUAD), comprising 467 fully reduced, continuum-fitted high-resolution quasar spectra from the Ultraviolet and Visual Echelle Spectrograph (UVES) on the European Southern Observatory's Very Large Telescope. The quasars have redshifts z=0-5, and a total exposure time of 10 million seconds provides continuum-to-noise ratios of 4-342 (median 20) per 2.5-km/s pixel at 5500 Å. The SQUAD spectra are fully reproducible from the raw, archival UVES exposures with open-source software, including our UVES_popler tool for combining multiple extracted echelle exposures which we document here. All processing steps are completely transparent and can be improved upon or modified for specific applications. A primary goal of SQUAD is to enable statistical studies of large quasar and absorber samples, and we provide tools and basic information to assist three broad scientific uses: studies of damped Lyman-α systems (DLAs), absorption-line surveys and time-variable absorption lines. For example, we provide a catalogue of 155 DLAs whose Lyman-α lines are covered by the DR1 spectra, 18 of which are reported for the first time. The HI column densities of these new DLAs are measured from the DR1 spectra. DR1 is publicly available and includes all reduced data and information to reproduce the final spectra.

  • 4 authors
·
Oct 14, 2018

Towards Real-world Event-guided Low-light Video Enhancement and Deblurring

In low-light conditions, capturing videos with frame-based cameras often requires long exposure times, resulting in motion blur and reduced visibility. While frame-based motion deblurring and low-light enhancement have been studied, they still pose significant challenges. Event cameras have emerged as a promising solution for improving image quality in low-light environments and addressing motion blur. They provide two key advantages: capturing scene details well even in low light due to their high dynamic range, and effectively capturing motion information during long exposures due to their high temporal resolution. Despite efforts to tackle low-light enhancement and motion deblurring using event cameras separately, previous work has not addressed both simultaneously. To explore the joint task, we first establish real-world datasets for event-guided low-light enhancement and deblurring using a hybrid camera system based on beam splitters. Subsequently, we introduce an end-to-end framework to effectively handle these tasks. Our framework incorporates a module to efficiently leverage temporal information from events and frames. Furthermore, we propose a module to utilize cross-modal feature information to employ a low-pass filter for noise suppression while enhancing the main structural information. Our proposed method significantly outperforms existing approaches in addressing the joint task. Our project pages are available at https://github.com/intelpro/ELEDNet.

  • 5 authors
·
Aug 27, 2024

CMTA: Cross-Modal Temporal Alignment for Event-guided Video Deblurring

Video deblurring aims to enhance the quality of restored results in motion-blurred videos by effectively gathering information from adjacent video frames to compensate for the insufficient data in a single blurred frame. However, when faced with consecutively severe motion blur situations, frame-based video deblurring methods often fail to find accurate temporal correspondence among neighboring video frames, leading to diminished performance. To address this limitation, we aim to solve the video deblurring task by leveraging an event camera with micro-second temporal resolution. To fully exploit the dense temporal resolution of the event camera, we propose two modules: 1) Intra-frame feature enhancement operates within the exposure time of a single blurred frame, iteratively enhancing cross-modality features in a recurrent manner to better utilize the rich temporal information of events, 2) Inter-frame temporal feature alignment gathers valuable long-range temporal information to target frames, aggregating sharp features leveraging the advantages of the events. In addition, we present a novel dataset composed of real-world blurred RGB videos, corresponding sharp videos, and event data. This dataset serves as a valuable resource for evaluating event-guided deblurring methods. We demonstrate that our proposed methods outperform state-of-the-art frame-based and event-based motion deblurring methods through extensive experiments conducted on both synthetic and real-world deblurring datasets. The code and dataset are available at https://github.com/intelpro/CMTA.

  • 3 authors
·
Aug 27, 2024

FAST-LIVO2: Fast, Direct LiDAR-Inertial-Visual Odometry

This paper proposes FAST-LIVO2: a fast, direct LiDAR-inertial-visual odometry framework to achieve accurate and robust state estimation in SLAM tasks and provide great potential in real-time, onboard robotic applications. FAST-LIVO2 fuses the IMU, LiDAR and image measurements efficiently through an ESIKF. To address the dimension mismatch between the heterogeneous LiDAR and image measurements, we use a sequential update strategy in the Kalman filter. To enhance the efficiency, we use direct methods for both the visual and LiDAR fusion, where the LiDAR module registers raw points without extracting edge or plane features and the visual module minimizes direct photometric errors without extracting ORB or FAST corner features. The fusion of both visual and LiDAR measurements is based on a single unified voxel map where the LiDAR module constructs the geometric structure for registering new LiDAR scans and the visual module attaches image patches to the LiDAR points. To enhance the accuracy of image alignment, we use plane priors from the LiDAR points in the voxel map (and even refine the plane prior) and update the reference patch dynamically after new images are aligned. Furthermore, to enhance the robustness of image alignment, FAST-LIVO2 employs an on-demanding raycast operation and estimates the image exposure time in real time. Lastly, we detail three applications of FAST-LIVO2: UAV onboard navigation demonstrating the system's computation efficiency for real-time onboard navigation, airborne mapping showcasing the system's mapping accuracy, and 3D model rendering (mesh-based and NeRF-based) underscoring the suitability of our reconstructed dense map for subsequent rendering tasks. We open source our code, dataset and application on GitHub to benefit the robotics community.

  • 14 authors
·
Aug 27, 2024

BAD-Gaussians: Bundle Adjusted Deblur Gaussian Splatting

While neural rendering has demonstrated impressive capabilities in 3D scene reconstruction and novel view synthesis, it heavily relies on high-quality sharp images and accurate camera poses. Numerous approaches have been proposed to train Neural Radiance Fields (NeRF) with motion-blurred images, commonly encountered in real-world scenarios such as low-light or long-exposure conditions. However, the implicit representation of NeRF struggles to accurately recover intricate details from severely motion-blurred images and cannot achieve real-time rendering. In contrast, recent advancements in 3D Gaussian Splatting achieve high-quality 3D scene reconstruction and real-time rendering by explicitly optimizing point clouds as Gaussian spheres. In this paper, we introduce a novel approach, named BAD-Gaussians (Bundle Adjusted Deblur Gaussian Splatting), which leverages explicit Gaussian representation and handles severe motion-blurred images with inaccurate camera poses to achieve high-quality scene reconstruction. Our method models the physical image formation process of motion-blurred images and jointly learns the parameters of Gaussians while recovering camera motion trajectories during exposure time. In our experiments, we demonstrate that BAD-Gaussians not only achieves superior rendering quality compared to previous state-of-the-art deblur neural rendering methods on both synthetic and real datasets but also enables real-time rendering capabilities. Our project page and source code is available at https://lingzhezhao.github.io/BAD-Gaussians/

  • 3 authors
·
Mar 18, 2024

Harm in AI-Driven Societies: An Audit of Toxicity Adoption on Chirper.ai

Large Language Models (LLMs) are increasingly embedded in autonomous agents that engage, converse, and co-evolve in online social platforms. While prior work has documented the generation of toxic content by LLMs, far less is known about how exposure to harmful content shapes agent behavior over time, particularly in environments composed entirely of interacting AI agents. In this work, we study toxicity adoption of LLM-driven agents on Chirper.ai, a fully AI-driven social platform. Specifically, we model interactions in terms of stimuli (posts) and responses (comments). We conduct a large-scale empirical analysis of agent behavior, examining how toxic responses relate to toxic stimuli, how repeated exposure to toxicity affects the likelihood of toxic responses, and whether toxic behavior can be predicted from exposure alone. Our findings show that toxic responses are more likely following toxic stimuli, and, at the same time, cumulative toxic exposure (repeated over time) significantly increases the probability of toxic responding. We further introduce two influence metrics, revealing a strong negative correlation between induced and spontaneous toxicity. Finally, we show that the number of toxic stimuli alone enables accurate prediction of whether an agent will eventually produce toxic content. These results highlight exposure as a critical risk factor in the deployment of LLM agents, particularly as such agents operate in online environments where they may engage not only with other AI chatbots, but also with human counterparts. This could trigger unwanted and pernicious phenomena, such as hate-speech propagation and cyberbullying. In an effort to reduce such risks, monitoring exposure to toxic content may provide a lightweight yet effective mechanism for auditing and mitigating harmful behavior in the wild.

  • 3 authors
·
Jan 3

Alleviating Exposure Bias in Diffusion Models through Sampling with Shifted Time Steps

Diffusion Probabilistic Models (DPM) have shown remarkable efficacy in the synthesis of high-quality images. However, their inference process characteristically requires numerous, potentially hundreds, of iterative steps, which could exaggerate the problem of exposure bias due to the training and inference discrepancy. Previous work has attempted to mitigate this issue by perturbing inputs during training, which consequently mandates the retraining of the DPM. In this work, we conduct a systematic study of exposure bias in DPM and, intriguingly, we find that the exposure bias could be alleviated with a novel sampling method that we propose, without retraining the model. We empirically and theoretically show that, during inference, for each backward time step t and corresponding state x_t, there might exist another time step t_s which exhibits superior coupling with x_t. Based on this finding, we introduce a sampling method named Time-Shift Sampler. Our framework can be seamlessly integrated to existing sampling algorithms, such as DDPM, DDIM and other high-order solvers, inducing merely minimal additional computations. Experimental results show our method brings significant and consistent improvements in FID scores on different datasets and sampling methods. For example, integrating Time-Shift Sampler to F-PNDM yields a FID=3.88, achieving 44.49\% improvements as compared to F-PNDM, on CIFAR-10 with 10 sampling steps, which is more performant than the vanilla DDIM with 100 sampling steps. Our code is available at https://github.com/Mingxiao-Li/TS-DPM.

  • 5 authors
·
May 24, 2023

DeXposure-FM: A Time-series, Graph Foundation Model for Credit Exposures and Stability on Decentralized Financial Networks

Credit exposure in Decentralized Finance (DeFi) is often implicit and token-mediated, creating a dense web of inter-protocol dependencies. Thus, a shock to one token may result in significant and uncontrolled contagion effects. As the DeFi ecosystem becomes increasingly linked with traditional financial infrastructure through instruments, such as stablecoins, the risk posed by this dynamic demands more powerful quantification tools. We introduce DeXposure-FM, the first time-series, graph foundation model for measuring and forecasting inter-protocol credit exposure on DeFi networks, to the best of our knowledge. Employing a graph-tabular encoder, with pre-trained weight initialization, and multiple task-specific heads, DeXposure-FM is trained on the DeXposure dataset that has 43.7 million data entries, across 4,300+ protocols on 602 blockchains, covering 24,300+ unique tokens. The training is operationalized for credit-exposure forecasting, predicting the joint dynamics of (1) protocol-level flows, and (2) the topology and weights of credit-exposure links. The DeXposure-FM is empirically validated on two machine learning benchmarks; it consistently outperforms the state-of-the-art approaches, including a graph foundation model and temporal graph neural networks. DeXposure-FM further produces financial economics tools that support macroprudential monitoring and scenario-based DeFi stress testing, by enabling protocol-level systemic-importance scores, sector-level spillover and concentration measures via a forecast-then-measure pipeline. Empirical verification fully supports our financial economics tools. The model and code have been publicly available. Model: https://huggingface.co/EVIEHub/DeXposure-FM. Code: https://github.com/EVIEHub/DeXposure-FM.

  • 4 authors
·
Feb 3

Standardized Benchmark Dataset for Localized Exposure to a Realistic Source at 10$-$90 GHz

The lack of freely available standardized datasets represents an aggravating factor during the development and testing the performance of novel computational techniques in exposure assessment and dosimetry research. This hinders progress as researchers are required to generate numerical data (field, power and temperature distribution) anew using simulation software for each exposure scenario. Other than being time consuming, this approach is highly susceptible to errors that occur during the configuration of the electromagnetic model. To address this issue, in this paper, the limited available data on the incident power density and resultant maximum temperature rise on the skin surface considering various steady-state exposure scenarios at 10-90 GHz have been statistically modeled. The synthetic data have been sampled from the fitted statistical multivariate distribution with respect to predetermined dosimetric constraints. We thus present a comprehensive and open-source dataset compiled of the high-fidelity numerical data considering various exposures to a realistic source. Furthermore, different surrogate models for predicting maximum temperature rise on the skin surface were fitted based on the synthetic dataset. All surrogate models were tested on the originally available data where satisfactory predictive performance has been demonstrated. A simple technique of combining quadratic polynomial and tensor-product spline surrogates, each operating on its own cluster of data, has achieved the lowest mean absolute error of 0.058 {\deg}C. Therefore, overall experimental results indicate the validity of the proposed synthetic dataset.

  • 3 authors
·
May 3, 2023

FlexiWorld: Learning and Planning via Flexible Action Chunks Across Multiple Time Scales

Latent world models predict future states for goal-directed planning using action chunks spanning multiple primitive steps. Existing methods typically use fixed-length chunks and either omit goal-conditioned action generation or limit their supervision to short goal spans. We introduce FlexiWorld, a JEPA-based world model that combines mixed-span goal supervision with variable-length action chunks to improve long-horizon control. During training, we sample varying goal spans and randomly partition the actions into variable-length chunks. We jointly train the world model with a causal action encoder that embeds variable-length chunks and an autoregressive actor that generates primitive actions sequentially. Student Forcing reduces exposure bias by training on generated action prefixes. For planning, Actor-Residual Cross-Entropy Method (ARCEM) combines action-residual search with within-chunk autoregressive feedback and chunk-boundary latent prediction. Across four benchmarks and goal distances, FlexiWorld with ARCEM achieves 89.29% mean success, compared with 83.98% for the strongest baseline. PushT ablations show improved direct control from mixed-span supervision, variable-length chunks, and Student Forcing. Without retraining, FlexiWorld supports different planning chunk lengths: longer chunks accelerate ARCEM by approximately 1.3times on average while maintaining comparable average success.

  • 7 authors
·
Sep 27

Weighted Tallying Bandits: Overcoming Intractability via Repeated Exposure Optimality

In recommender system or crowdsourcing applications of online learning, a human's preferences or abilities are often a function of the algorithm's recent actions. Motivated by this, a significant line of work has formalized settings where an action's loss is a function of the number of times that action was recently played in the prior m timesteps, where m corresponds to a bound on human memory capacity. To more faithfully capture decay of human memory with time, we introduce the Weighted Tallying Bandit (WTB), which generalizes this setting by requiring that an action's loss is a function of a weighted summation of the number of times that arm was played in the last m timesteps. This WTB setting is intractable without further assumption. So we study it under Repeated Exposure Optimality (REO), a condition motivated by the literature on human physiology, which requires the existence of an action that when repetitively played will eventually yield smaller loss than any other sequence of actions. We study the minimization of the complete policy regret (CPR), which is the strongest notion of regret, in WTB under REO. Since m is typically unknown, we assume we only have access to an upper bound M on m. We show that for problems with K actions and horizon T, a simple modification of the successive elimination algorithm has O left( KT + (m+M)K right) CPR. Interestingly, upto an additive (in lieu of mutliplicative) factor in (m+M)K, this recovers the classical guarantee for the simpler stochastic multi-armed bandit with traditional regret. We additionally show that in our setting, any algorithm will suffer additive CPR of Omega left( mK + M right), demonstrating our result is nearly optimal. Our algorithm is computationally efficient, and we experimentally demonstrate its practicality and superiority over natural baselines.

  • 4 authors
·
May 4, 2023

Rolling Forcing: Autoregressive Long Video Diffusion in Real Time

Streaming video generation, as one fundamental component in interactive world models and neural game engines, aims to generate high-quality, low-latency, and temporally coherent long video streams. However, most existing work suffers from severe error accumulation that often significantly degrades the generated stream videos over long horizons. We design Rolling Forcing, a novel video generation technique that enables streaming long videos with minimal error accumulation. Rolling Forcing comes with three novel designs. First, instead of iteratively sampling individual frames, which accelerates error propagation, we design a joint denoising scheme that simultaneously denoises multiple frames with progressively increasing noise levels. This design relaxes the strict causality across adjacent frames, effectively suppressing error growth. Second, we introduce the attention sink mechanism into the long-horizon stream video generation task, which allows the model to keep key value states of initial frames as a global context anchor and thereby enhances long-term global consistency. Third, we design an efficient training algorithm that enables few-step distillation over largely extended denoising windows. This algorithm operates on non-overlapping windows and mitigates exposure bias conditioned on self-generated histories. Extensive experiments show that Rolling Forcing enables real-time streaming generation of multi-minute videos on a single GPU, with substantially reduced error accumulation.

TencentARC ARC Lab, Tencent
·
Sep 29, 2025 3

Adaptive Teacher Exposure for Self-Distillation in LLM Reasoning

On-policy self-distillation has become a strong recipe for LLM reasoning, where a privileged teacher supervises the student's own rollouts while conditioning on the reference solution. A design choice shared by nearly all such methods, however, has gone unquestioned: the teacher always sees the full reference reasoning. We argue that this default itself is part of the problem and identify a teacher-side exposure mismatch: when the teacher conditions on reasoning far beyond the student's current competence, the resulting token targets become too strong to absorb. A controlled fixed-exposure sweep makes this concrete on two fronts: 1) full exposure is not reliably the best choice, and 2) student-teacher mismatch grows monotonically as the teacher sees more privileged reasoning. This motivates treating teacher exposure not as a fixed hyperparameter but as a learnable training-time control variable. We therefore propose Adaptive Teacher Exposure for Self-Distillation (ATESD). ATESD models the reveal ratio with a lightweight Beta-policy controller conditioned on compact training-state statistics, and uses one sampled exposure for a short hold window of student updates. To make this exposure controller learnable, we optimize it with a discounted learning-progress reward that scores each held decision by its effect on the student's future improvement rather than its immediate loss change, addressing the delayed credit assignment induced by on-policy distillation. Experiments on AIME 24, AIME 25, and HMMT 25 across Qwen3-{1.7B, 4B, 8B} show that ATESD consistently outperforms competitive self-distillation and RL baselines, improving over OPSD by +0.95, +2.05, and +2.33 Average@12 points respectively, and establishing adaptive teacher exposure as an effective new axis for reasoning self-distillation.

ByteDance ByteDance
·
May 11 3

Delay-of-Gratification as a Multi-Agent Survival Micro-benchmark for Long-Horizon LLMs: Social Exposure, Personas, and Tool Use Budgets

Large language models (LLMs) are increasingly deployed as multi-turn agents that must sustain goals, use tools, and adapt to other agents over extended interactions. However, existing research lacks auditable, multi-turn, multi-factorial experiments that quantify LLM behavior under explicit constraints, with time-resolved statistics that reveal how behavior unfolds over long horizons. To address this gap, we develop a multi-agent micro-benchmark inspired by the Stanford marshmallow experiment: ReAct agents operate minute-by-minute with a "raise a question" tool under a per-step budget, while we factorially manipulate social context (broadcast vs. isolated), personas (age, hedonic drive), and metacognitive policy (mandatory vs. optional tool use). We analyze outcomes with Kaplan-Meier (KM) survival curves and discrete-time hazard models over a long risk horizon across 19,200 agent trajectories in 64 cells. Behavior shows a sharp early "eat" impulse, and only 75.9% of agents persist to the end. In a discrete-time hazard model, isolation reduces per-minute risk relative to broadcast, whereas a must-use self-questioning policy increases risk. On average, agents ask approx 7.12 questions and hit the per-step budget in approx 6% of minutes. Questioning declines faster under broadcast than isolation. Ablation experiments demonstrated that removing hedonic drive and/or persona age increases survival and completion, narrows the broadcast/isolated gap, but leaves the must vs. may ordering intact. The combined ablation (no hedonic + no persona age) yields the highest completion (approaching 1.0). These results establish delay-of-gratification as a compact, multi-turn interaction benchmark that captures social contagion and tool-use dynamics in LLM agents, providing a reproducible testbed and statistics for analyzing long-horizon, multi-agent behavior.

  • 3 authors
·
Aug 25

BlazeBVD: Make Scale-Time Equalization Great Again for Blind Video Deflickering

Developing blind video deflickering (BVD) algorithms to enhance video temporal consistency, is gaining importance amid the flourish of image processing and video generation. However, the intricate nature of video data complicates the training of deep learning methods, leading to high resource consumption and instability, notably under severe lighting flicker. This underscores the critical need for a compact representation beyond pixel values to advance BVD research and applications. Inspired by the classic scale-time equalization (STE), our work introduces the histogram-assisted solution, called BlazeBVD, for high-fidelity and rapid BVD. Compared with STE, which directly corrects pixel values by temporally smoothing color histograms, BlazeBVD leverages smoothed illumination histograms within STE filtering to ease the challenge of learning temporal data using neural networks. In technique, BlazeBVD begins by condensing pixel values into illumination histograms that precisely capture flickering and local exposure variations. These histograms are then smoothed to produce singular frames set, filtered illumination maps, and exposure maps. Resorting to these deflickering priors, BlazeBVD utilizes a 2D network to restore faithful and consistent texture impacted by lighting changes or localized exposure issues. BlazeBVD also incorporates a lightweight 3D network to amend slight temporal inconsistencies, avoiding the resource consumption issue. Comprehensive experiments on synthetic, real-world and generated videos, showcase the superior qualitative and quantitative results of BlazeBVD, achieving inference speeds up to 10x faster than state-of-the-arts.

  • 7 authors
·
Mar 10, 2024

Domain-adaptive Video Deblurring via Test-time Blurring

Dynamic scene video deblurring aims to remove undesirable blurry artifacts captured during the exposure process. Although previous video deblurring methods have achieved impressive results, they suffer from significant performance drops due to the domain gap between training and testing videos, especially for those captured in real-world scenarios. To address this issue, we propose a domain adaptation scheme based on a blurring model to achieve test-time fine-tuning for deblurring models in unseen domains. Since blurred and sharp pairs are unavailable for fine-tuning during inference, our scheme can generate domain-adaptive training pairs to calibrate a deblurring model for the target domain. First, a Relative Sharpness Detection Module is proposed to identify relatively sharp regions from the blurry input images and regard them as pseudo-sharp images. Next, we utilize a blurring model to produce blurred images based on the pseudo-sharp images extracted during testing. To synthesize blurred images in compliance with the target data distribution, we propose a Domain-adaptive Blur Condition Generation Module to create domain-specific blur conditions for the blurring model. Finally, the generated pseudo-sharp and blurred pairs are used to fine-tune a deblurring model for better performance. Extensive experimental results demonstrate that our approach can significantly improve state-of-the-art video deblurring methods, providing performance gains of up to 7.54dB on various real-world video deblurring datasets. The source code is available at https://github.com/Jin-Ting-He/DADeblur.

  • 7 authors
·
Jul 12, 2024

A New Dataset and Performance Benchmark for Real-time Spacecraft Segmentation in Onboard Flight Computers

Spacecraft deployed in outer space are routinely subjected to various forms of damage due to exposure to hazardous environments. In addition, there are significant risks to the subsequent process of in-space repairs through human extravehicular activity or robotic manipulation, incurring substantial operational costs. Recent developments in image segmentation could enable the development of reliable and cost-effective autonomous inspection systems. While these models often require large amounts of training data to achieve satisfactory results, publicly available annotated spacecraft segmentation data are very scarce. Here, we present a new dataset of nearly 64k annotated spacecraft images that was created using real spacecraft models, superimposed on a mixture of real and synthetic backgrounds generated using NASA's TTALOS pipeline. To mimic camera distortions and noise in real-world image acquisition, we also added different types of noise and distortion to the images. Finally, we finetuned YOLOv8 and YOLOv11 segmentation models to generate performance benchmarks for the dataset under well-defined hardware and inference time constraints to mimic real-world image segmentation challenges for real-time onboard applications in space on NASA's inspector spacecraft. The resulting models, when tested under these constraints, achieved a Dice score of 0.92, Hausdorff distance of 0.69, and an inference time of about 0.5 second. The dataset and models for performance benchmark are available at https://github.com/RiceD2KLab/SWiM.

  • 9 authors
·
Jul 14, 2025

Gaussian-LIC: Real-Time Photo-Realistic SLAM with Gaussian Splatting and LiDAR-Inertial-Camera Fusion

In this paper, we present a real-time photo-realistic SLAM method based on marrying Gaussian Splatting with LiDAR-Inertial-Camera SLAM. Most existing radiance-field-based SLAM systems mainly focus on bounded indoor environments, equipped with RGB-D or RGB sensors. However, they are prone to decline when expanding to unbounded scenes or encountering adverse conditions, such as violent motions and changing illumination. In contrast, oriented to general scenarios, our approach additionally tightly fuses LiDAR, IMU, and camera for robust pose estimation and photo-realistic online mapping. To compensate for regions unobserved by the LiDAR, we propose to integrate both the triangulated visual points from images and LiDAR points for initializing 3D Gaussians. In addition, the modeling of the sky and varying camera exposure have been realized for high-quality rendering. Notably, we implement our system purely with C++ and CUDA, and meticulously design a series of strategies to accelerate the online optimization of the Gaussian-based scene representation. Extensive experiments demonstrate that our method outperforms its counterparts while maintaining real-time capability. Impressively, regarding photo-realistic mapping, our method with our estimated poses even surpasses all the compared approaches that utilize privileged ground-truth poses for mapping. Our code has been released on https://github.com/APRIL-ZJU/Gaussian-LIC.

  • 8 authors
·
Apr 10, 2024

FlowLong: Inference-time Long Video Generation via Manifold-constrained Tweedie Matching

Extending the generation horizon of video diffusion models to long sequences remains a long-standing and important challenge. Existing training-free approaches fall into two categories: extensions of bidirectional models, which are tightly coupled to specific architectures and suffer from quality degradation over long horizons, and autoregressive models, which accumulate drift errors due to exposure bias and tend to produce repetitive motion patterns. To address these issues, we propose a novel but simple inference-time approach for long video generation that is architecture-agnostic and requires no additional training. Our method generates long videos via overlapping sliding windows, where predicted clean samples from adjacent windows are blended via Tweedie matching to enforce both manifold constraint and temporal consistency across overlap regions. Stochastic early-phase sampling then synchronizes per-window trajectories by injecting fresh noise after each Tweedie matching correction in the high-noise phase, before transitioning to deterministic ODE sampling to preserve fine-grained visual fidelity. Applied to various video generation models, our method generates videos several times longer than the native window length while outperforming both training-free and autoregressive baselines in temporal consistency and visual quality, and further extends to audio-video joint generation and text-to-3DGS without any fine-tuning.

kaist-ai KAIST AI
·
May 19 1

GUIDE: Resolving Domain Bias in GUI Agents through Real-Time Web Video Retrieval and Plug-and-Play Annotation

Large vision-language models have endowed GUI agents with strong general capabilities for interface understanding and interaction. However, due to insufficient exposure to domain-specific software operation data during training, these agents exhibit significant domain bias - they lack familiarity with the specific operation workflows (planning) and UI element layouts (grounding) of particular applications, limiting their real-world task performance. In this paper, we present GUIDE (GUI Unbiasing via Instructional-Video Driven Expertise), a training-free, plug-and-play framework that resolves GUI agent domain bias by autonomously acquiring domain-specific expertise from web tutorial videos through a retrieval-augmented automated annotation pipeline. GUIDE introduces two key innovations. First, a subtitle-driven Video-RAG pipeline unlocks video semantics through subtitle analysis, performing progressive three-stage retrieval - domain classification, topic extraction, and relevance matching - to identify task-relevant tutorial videos. Second, a fully automated annotation pipeline built on an inverse dynamics paradigm feeds consecutive keyframes enhanced with UI element detection into VLMs, inferring the required planning and grounding knowledge that are injected into the agent's corresponding modules to address both manifestations of domain bias. Extensive experiments on OSWorld demonstrate GUIDE's generality as a plug-and-play component for both multi-agent systems and single-model agents. It consistently yields over 5% improvements and reduces execution steps - without modifying any model parameters or architecture - validating GUIDE as an architecture-agnostic enhancement to bridge GUI agent domain bias.

  • 6 authors
·
Jun 29

GeoWind2Plan: Mission-Time 3D Urban Wind Prediction for Energy-Efficient UAV Planning

In urban low-altitude flight, buildings reshape ambient wind into spatially varying 3D flow, making unmanned aerial vehicle (UAV) energy depend on local wind exposure as well as path length. However, building-resolved wind information is rarely available when a mission must be planned. Computational fluid dynamics (CFD) can produce high-fidelity urban flow fields, but each simulation is tied to a fixed inflow boundary condition and can take hours to days, which is incompatible with urban UAV missions that typically last minutes to tens of minutes. We present GeoWind2Plan, a geometry-to-wind-to-planning framework for mission-time 3D urban wind prediction and energy-efficient UAV planning. Given only a background wind vector, 3D building geometry, and a start-goal pair, GeoWind2Plan transforms the building geometry into a reference-wind frame, predicts mission-relevant 3D wind patches with a localized geometry-conditioned neural operator, stitches them into a queryable local wind field, and optimizes a feasible 3D path and speed profile using a physically grounded UAV energy model. Rather than pursuing CFD-perfect reconstruction, GeoWind2Plan targets decision-useful wind prediction: trajectories are planned with predicted wind and evaluated under high-fidelity CFD wind. Across held-out urban domains, wind speeds, and mission wind-angle regimes, GeoWind2Plan performs corridor-localized wind inference in about 3 seconds, compared with roughly 8 hours for CFD. Under CFD evaluation, trajectories planned with GeoWind2Plan reduce energy by 6.9%, 12.7%, and 4.5% in tailwind, headwind, and crosswind missions relative to wind-agnostic planning, recovering 87.9%, 85.7%, and 75.0% of CFD-reference savings. These results show that fast, corridor-localized 3D urban wind prediction can make wind-aware UAV energy planning practical at mission time.

  • 9 authors
·
Sep 27

ExpoCM: Exposure-Aware One-Step Generative Single-Image HDR Reconstruction

Single-image HDR reconstruction aims to recover high dynamic range radiance from a single low dynamic range (LDR) input, but remains highly ill-posed due to detail saturation in over-exposed regions and noise amplification in under-exposed areas. While recent diffusion-based approaches offer powerful generative priors, they often overlook the exposure-dependent nature of the degradation and incur substantial computational costs from iterative sampling. To address these challenges, we propose ExpoCM, a novel one-step generative HDR reconstruction framework that reformulates HDR reconstruction as a Probability Flow ODE (PF-ODE) and constructs exposure-aware consistency trajectories via exposure-dependent perturbations. Specifically, a soft exposure mask is first constructed to separate the LDR image into over-, under-, and well-exposed regions. Based on this partition, region-conditioned consistency trajectories are designed to hallucinate saturated details, suppress noise in dark regions, and preserve reliable structures within a single, distillation-free inference step. To further enhance perceptual quality, we introduce an Exposure-guided Luminance-Chromaticity Loss in the CIE~L^*a^*b^* space, which assigns exposure-aware weights to luminance and chromaticity components, effectively mitigating brightness bias and color drift. Extensive experiments on the HDR-REAL, HDR-EYE, and AIM2025 benchmarks demonstrate that ExpoCM achieves state-of-the-art fidelity and perceptual accuracy, while enabling over 400times and 20times faster inference compared to DDPM (1000 steps) and DDIM (50 steps), respectively.

  • 6 authors
·
May 3

Augmenting LLMs for General Time Series Understanding and Prediction

Time series data is fundamental to decision-making in many crucial domains including healthcare, finance, and environmental science. However, analyzing this data often requires incorporating unstructured contextual information, answering domain-specific questions, and generating natural language explanations -- capabilities that traditional time series models lack due to their inability to process text. While Large Language Models (LLMs) excel at contextual reasoning and knowledge integration, they struggle with numerical time series due to inefficient text-based representations and limited exposure to temporal data during pretraining. We address this gap by augmenting an LLM with specialized time series perception through a patch-based encoder-decoder architecture. We train this Time Series-augmented LLM (TsLLM) on a large corpus of over 2 million interleaved time series and text examples spanning diverse analysis tasks: forecasting with contextual information, time series question-answering, pattern explanation, classification with natural language outputs, and report generation. This training enables TsLLM to leverage both its language understanding and newly acquired temporal reasoning capabilities. While not designed to surpass specialized models on traditional benchmarks, TsLLM demonstrates strong performance on tasks requiring the integration of time series analysis with natural language -- capabilities that existing approaches cannot provide. Our work establishes a new paradigm for time series analysis that bridges numerical computation and natural language understanding, democratizing access to sophisticated temporal reasoning through natural language interaction.

  • 4 authors
·
Oct 1, 2025

OmniForcing: Unleashing Real-time Joint Audio-Visual Generation

Recent joint audio-visual diffusion models achieve remarkable generation quality but suffer from high latency due to their bidirectional attention dependencies, hindering real-time applications. We propose OmniForcing, the first framework to distill an offline, dual-stream bidirectional diffusion model into a high-fidelity streaming autoregressive generator. However, naively applying causal distillation to such dual-stream architectures triggers severe training instability, due to the extreme temporal asymmetry between modalities and the resulting token sparsity. We address the inherent information density gap by introducing an Asymmetric Block-Causal Alignment with a zero-truncation Global Prefix that prevents multi-modal synchronization drift. The gradient explosion caused by extreme audio token sparsity during the causal shift is further resolved through an Audio Sink Token mechanism equipped with an Identity RoPE constraint. Finally, a Joint Self-Forcing Distillation paradigm enables the model to dynamically self-correct cumulative cross-modal errors from exposure bias during long rollouts. Empowered by a modality-independent rolling KV-cache inference scheme, OmniForcing achieves state-of-the-art streaming generation at sim25 FPS on a single GPU, maintaining multi-modal synchronization and visual quality on par with the bidirectional teacher.Project Page: https://omniforcing.com{https://omniforcing.com}

  • 10 authors
·
Mar 12 4

Vorch-Streamer: Extending Human Audio-Visual Generation to Real-Time Long-Form Streaming

Real-time long-form avatar audio-video generation requires causal, continuous synthesis while maintaining audiovisual synchronization and visual consistency. Adapting a pretrained bidirectional model to this setting presents two key dilemmas. First, autoregressively reusing generated blocks as context creates exposure bias, causing errors and visual drift to accumulate over long rollouts. Second, a global speech utterance does not indicates a causal generator which portion should be spoken next when only limited local audio-video context is available. We present Vorch-Streamer, a post-training framework that addresses these challenges and enables real-time long-form Text-to-Audio-Video (T2AV) streaming. We construct a synthetic corpus of 80K avatar clips spanning 12-21 seconds and first train a causal generator with mixed Teacher Forcing and Diffusion Forcing. We then apply long-horizon Self Forcing with DMD distillation, exposing the model to its own rollout distribution while preserving the quality of the pretrained bidirectional teacher. To explicitly control speech progression, an external language model predicts discrete 25-Hz speech-planning tokens, whose continuous features condition the audio diffusion branch and align each causal block with the content it should speak. With bounded causal context and four-step denoising, Vorch-Streamer jointly generates audio and video from text at 27.12 FPS, exceeding the 24-FPS real-time playback rate while maintaining competitive audio-lip synchronization and strong identity preservation over long-form generation.

  • 9 authors
·
Aug 6

From Geometry to Behavior: How Instruction Exposure Unlocks Latent Rhetorical Directions in LLMs

Language models do not merely memorize facts; they absorb rhetorical strategies from pretraining data, including the human tendency to reason by analogy. We ask: is this absorbed capability geometrically accessible before any instruction tuning, and what determines whether it can be activated at inference time? We extract an "Analogy Vector" from the residual stream via difference-in-means and show it enables steerable explanation style across seven instruction-tuned models (Gemma-2, Llama-3.1, Qwen-2.5; 2B-32B), improving harmonic mean from 3.22 to 3.94 (+22%) for Gemma-2-9B-IT on 300 held-out test prompts. A small human validation study confirms the LLM judge on Analogy Quality. Our central finding, from seven matched base-instruct pairs, is a gradient of behavioral accessibility: the analogy direction exists in every base model, but its behavioral accessibility under linear intervention scales continuously with instruction exposure during training. Gemma-2 base models (strict pretraining/IT separation) show flat steering landscapes: present but behaviorally inert. Qwen-2.5 base models (instruction data woven into pretraining) are already partially accessible before any explicit fine-tuning; base-instruct cosine similarity of the analogy vector reaches 0.94-0.97 for Qwen versus 0.37-0.66 for Gemma, providing geometric corroboration of the behavioral gradient. This challenges the binary "base vs instruct" framing: the relevant variable is how much instruction exposure a model has received across its full training pipeline. We position activation steering as a complementary interpretability tool that reveals how instruction exposure organizes rhetorical knowledge in activation space.

  • 1 authors
·
Oct 13

Temperature-scaling surprisal estimates improve fit to human reading times -- but does it do so for the "right reasons"?

A wide body of evidence shows that human language processing difficulty is predicted by the information-theoretic measure surprisal, a word's negative log probability in context. However, it is still unclear how to best estimate these probabilities needed for predicting human processing difficulty -- while a long-standing belief held that models with lower perplexity would provide more accurate estimates of word predictability, and therefore lead to better reading time predictions, recent work has shown that for very large models, psycholinguistic predictive power decreases. One reason could be that language models might be more confident of their predictions than humans, because they have had exposure to several magnitudes more data. In this paper, we test what effect temperature-scaling of large language model (LLM) predictions has on surprisal estimates and their predictive power of reading times of English texts. Firstly, we show that calibration of large language models typically improves with model size, i.e. poorer calibration cannot account for poorer fit to reading times. Secondly, we find that temperature-scaling probabilities lead to a systematically better fit to reading times (up to 89% improvement in delta log likelihood), across several reading time corpora. Finally, we show that this improvement in fit is chiefly driven by words that are composed of multiple subword tokens.

  • 3 authors
·
Nov 15, 2023

HDRT: Infrared Capture for HDR Imaging

Capturing real world lighting is a long standing challenge in imaging and most practical methods acquire High Dynamic Range (HDR) images by either fusing multiple exposures, or boosting the dynamic range of Standard Dynamic Range (SDR) images. Multiple exposure capture is problematic as it requires longer capture times which can often lead to ghosting problems. The main alternative, inverse tone mapping is an ill-defined problem that is especially challenging as single captured exposures usually contain clipped and quantized values, and are therefore missing substantial amounts of content. To alleviate this, we propose a new approach, High Dynamic Range Thermal (HDRT), for HDR acquisition using a separate, commonly available, thermal infrared (IR) sensor. We propose a novel deep neural method (HDRTNet) which combines IR and SDR content to generate HDR images. HDRTNet learns to exploit IR features linked to the RGB image and the IR-specific parameters are subsequently used in a dual branch method that fuses features at shallow layers. This produces an HDR image that is significantly superior to that generated using naive fusion approaches. To validate our method, we have created the first HDR and thermal dataset, and performed extensive experiments comparing HDRTNet with the state-of-the-art. We show substantial quantitative and qualitative quality improvements on both over- and under-exposed images, showing that our approach is robust to capturing in multiple different lighting conditions.

  • 5 authors
·
Jun 8, 2024

RadGame: An AI-Powered Platform for Radiology Education

We introduce RadGame, an AI-powered gamified platform for radiology education that targets two core skills: localizing findings and generating reports. Traditional radiology training is based on passive exposure to cases or active practice with real-time input from supervising radiologists, limiting opportunities for immediate and scalable feedback. RadGame addresses this gap by combining gamification with large-scale public datasets and automated, AI-driven feedback that provides clear, structured guidance to human learners. In RadGame Localize, players draw bounding boxes around abnormalities, which are automatically compared to radiologist-drawn annotations from public datasets, and visual explanations are generated by vision-language models for user missed findings. In RadGame Report, players compose findings given a chest X-ray, patient age and indication, and receive structured AI feedback based on radiology report generation metrics, highlighting errors and omissions compared to a radiologist's written ground truth report from public datasets, producing a final performance and style score. In a prospective evaluation, participants using RadGame achieved a 68% improvement in localization accuracy compared to 17% with traditional passive methods and a 31% improvement in report-writing accuracy compared to 4% with traditional methods after seeing the same cases. RadGame highlights the potential of AI-driven gamification to deliver scalable, feedback-rich radiology training and reimagines the application of medical AI resources in education.

  • 32 authors
·
Sep 16, 2025

IMUG-Bench: Benchmarking Unified Multimodal Models on Interleaved Understanding and Generation

In recent years, unified multimodal models (UMMs) have emerged to support both understanding and generation within a single framework. Mastering dynamic, multi-turn interleaved image-text dialogues is a crucial task for UMMs in real-world applications. However, existing benchmarks fail to evaluate this important task, as they are often limited to single-turn or static settings, and typically overlook exposure bias in multi-turn interactions. To bridge this gap, we propose IMUG-Bench, a comprehensive benchmark for multi-turn interleaved image-text dialogue of UMMs that jointly evaluates their understanding and generation capabilities. Our IMUG-Bench comprises three classes: Static Spatial, Temporal Causal, and Hybrid, covering 3,113 samples and 12,034 interaction turns. It also includes dynamic understanding questions, thereby supporting evaluation that better reflects real-world multi-turn interaction scenarios. Large-scale experiments on IMUG-Bench systematically evaluate mainstream open-source and closed-source UMMs, revealing their capability boundaries and failure modes, and uncovering pronounced exposure bias on the generation side in multi-turn interactions. We further explore several test-time scaling strategies, including Chain-of-Thought, Self-Verification, and Best-of-N Sampling, which effectively improve generation accuracy and mitigate exposure bias in generation tasks. These findings provide insights into enhancing the robustness and multi-turn interaction capability of future UMMs.

  • 15 authors
·
Jun 7

Risk-Aware Reranking for Agentic Tool Retrieval

Tool retrieval determines which external tools are exposed to an LLM agent for a user query or task, making retrieval a critical pre-execution safety boundary. Unlike document retrieval, tool retrieval exposes executable actions: a tool that is useful for one task may be unnecessary or risky for another. However, existing tool-retrieval methods primarily optimize semantic relevance, and safety evaluations often focus on failures after tool execution rather than risks introduced during retrieval. We study risk-aware tool retrieval, where the goal is to retrieve useful tools while reducing exposure to higher-risk tools. We propose a lightweight reranking framework on top of a frozen first-stage retriever. The framework models query-conditioned relevance and tool-level exposure risk separately, combines them through an explicit parameter controlling the tradeoff between safety and utility, smooths scores over a ToolGraph, and optionally applies rule-based safety constraints. To support retrieval-time safety evaluation, we annotate 6,108 tools across UltraTool and Seal-Tools with five ordinal risk levels and define metrics that measure risky-tool exposure in the top-k results. Experiments on UltraTool and Seal-Tools show that our approach improves the relevance--safety tradeoff over relevance-only retrievers and reranking baselines, with the rule-filtered variant providing a conservative operating point for safety-critical deployments. These findings indicate that retrieval-stage filtering can reduce the candidate action space exposed to agents before execution, complementing downstream tool-use safeguards. The code and supplementary materials are available at: https://github.com/qli447/risk-aware-tool-retrieval-release.

  • 9 authors
·
Aug 23

ExposureDiffusion: Learning to Expose for Low-light Image Enhancement

Previous raw image-based low-light image enhancement methods predominantly relied on feed-forward neural networks to learn deterministic mappings from low-light to normally-exposed images. However, they failed to capture critical distribution information, leading to visually undesirable results. This work addresses the issue by seamlessly integrating a diffusion model with a physics-based exposure model. Different from a vanilla diffusion model that has to perform Gaussian denoising, with the injected physics-based exposure model, our restoration process can directly start from a noisy image instead of pure noise. As such, our method obtains significantly improved performance and reduced inference time compared with vanilla diffusion models. To make full use of the advantages of different intermediate steps, we further propose an adaptive residual layer that effectively screens out the side-effect in the iterative refinement when the intermediate results have been already well-exposed. The proposed framework can work with both real-paired datasets, SOTA noise models, and different backbone networks. Note that, the proposed framework is compatible with real-paired datasets, real/synthetic noise models, and different backbone networks. We evaluate the proposed method on various public benchmarks, achieving promising results with consistent improvements using different exposure models and backbones. Besides, the proposed method achieves better generalization capacity for unseen amplifying ratios and better performance than a larger feedforward neural model when few parameters are adopted.

  • 7 authors
·
Jul 15, 2023

HDR-NSFF: High Dynamic Range Neural Scene Flow Fields

Radiance of real-world scenes typically spans a much wider dynamic range than what standard cameras can capture. While conventional HDR methods merge alternating-exposure frames, these approaches are inherently constrained to 2D pixel-level alignment, often leading to ghosting artifacts and temporal inconsistency in dynamic scenes. To address these limitations, we present HDR-NSFF, a paradigm shift from 2D-based merging to 4D spatio-temporal modeling. Our framework reconstructs dynamic HDR radiance fields from alternating-exposure monocular videos by representing the scene as a continuous function of space and time, and is compatible with both neural radiance field and 4D Gaussian Splatting (4DGS) based dynamic representations. This unified end-to-end pipeline explicitly models HDR radiance, 3D scene flow, geometry, and tone-mapping, ensuring physical plausibility and global coherence. We further enhance robustness by (i) extending semantic-based optical flow with DINO features to achieve exposure-invariant motion estimation, and (ii) incorporating a generative prior as a regularizer to compensate for limited observation in monocular captures and saturation-induced information loss. To evaluate HDR space-time view synthesis, we present the first real-world HDR-GoPro dataset specifically designed for dynamic HDR scenes. Experiments demonstrate that HDR-NSFF recovers fine radiance details and coherent dynamics even under challenging exposure variations, thereby achieving state-of-the-art performance in novel space-time view synthesis. Project page: https://shin-dong-yeon.github.io/HDR-NSFF/

  • 4 authors
·
Mar 8

Evaluating Relational Reasoning in LLMs with REL

Relational reasoning is the ability to infer relations that jointly bind multiple entities, attributes, or variables. This ability is central to scientific reasoning, but existing evaluations of relational reasoning in large language models often focus on structured inputs such as tables, graphs, or synthetic tasks, and do not isolate the difficulty introduced by higher-arity relational binding. We study this problem through the lens of Relational Complexity (RC), which we define as the minimum number of independent entities or operands that must be simultaneously bound to apply a relation. RC provides a principled way to vary reasoning difficulty while controlling for confounders such as input size, vocabulary, and representational choices. Building on RC, we introduce REL, a generative benchmark framework spanning algebra, chemistry, and biology that varies RC within each domain. Across frontier LLMs, performance degrades consistently and monotonically as RC increases, even when the total number of entities is held fixed. This failure mode persists with increased test-time compute and in-context learning, suggesting a limitation tied to the arity of the required relational binding rather than to insufficient inference steps or lack of exposure to examples. Our results identify a regime of higher-arity reasoning in which current models struggle, and motivate re-examining benchmarks through the lens of relational complexity.

  • 5 authors
·
Apr 13

Multi-Decoder OneRec: Controllable Generative Retrieval for Multi-Objective Industrial Recommendation

Industrial recommender systems build candidate pools by assigning explicit quotas to objective-specific retrieval routes. This design offers quota control but increasingly fragments modeling, training, and serving as the route set grows. Semantic-ID-based generative retrieval provides a unified alternative, yet a single decoder entangles objective policies and limits candidate complementarity. We propose Multi-Decoder OneRec, a controllable framework that combines shared representations, isolated objective adaptation, and coordinated decoding. All objectives share a user-context module and the General Decoder, while each objective adds an isolated, parameter-efficient LoRA expert. During training, exposure-sample next-token prediction (NTP) updates the shared base, target-filtered NTP updates the event-based experts, and Kullback-Leibler (KL)-regularized policy optimization updates the Watch-time expert; gradient routing isolates these updates, and the General Decoder supplies a stop-gradient reference. At inference, explicit route quotas allocate the fixed budget and Multi-Decoder Constrained Beam Search reduces cross-route overlap. We publicly release Kwai26, a large-scale multi-objective benchmark with 1.31 billion raw item-level records, 31.85 million Item-ID entries, and 25.03 million items with valid Semantic IDs, together with predefined splits and an evaluation protocol. Under the same 512-item retrieval budget, Multi-Decoder OneRec improves over the single-decoder OneRec baseline by 1.69%-5.62% across four Recall@512 metrics. In a production A/B test, it yields relative gains of 0.37% in app usage time per device, 0.19% in Day-7 retained users, 0.19% in devices with at least one share, and 2.09% in new-content Cold-Start. These results show that generative retrieval can combine shared modeling with objective-specific control and complementary candidate generation.

  • 14 authors
·
Jul 28

Market-Conditioned JEPA: Learning from Unpredictable Market Shocks

Much of the variation in financial time series is driven by market-wide shocks that cannot be predicted from an asset's own history. Per-asset self-supervised learning treats this variation as irreducible noise. Under a latent factor model, we show that conditioning prediction on the realized market factor makes the asset's market exposure necessary for optimal prediction, while reducing the noise against which the asset-specific component is learned. Building on this insight, we introduce Market-Conditioned JEPA (MC-JEPA), a joint-embedding predictive architecture for financial time series. During training, we construct a leave-one-out market condition for each asset from the future target embeddings of other assets and incorporate it through factor loadings derived from the asset's own representation. On 11 years of minute-level Chinese A-share data, MC-JEPA improves over per-asset JEPA across nine targets spanning returns, market exposure, risk, and liquidity, with the strongest and most statistically significant gains in exposure, risk, and liquidity. It achieves the best RankIC on all liquidity targets and on return horizons from two hours to five days, outperforming time-series foundation models and self-supervised baselines, and delivers the best portfolio performance in a historical backtest. Ablations show that the return and exposure gains require the condition to be aligned with the realized market movement. After restoring the volatility scale removed by normalization, the predictor's factor loadings rank stocks by market beta nearly as well as a supervised probe, without labels. A synthetic factor-model study with known parameters shows that conditioning improves the recovery of both market exposure and the asset-specific component.

OpenFinMind OpenFinMind
·
Nov 9 5

A Survey of On-Policy Distillation for Large Language Models

Knowledge distillation has become a primary mechanism for transferring reasoning and domain expertise from frontier Large Language Models (LLMs) to smaller, deployable students. However, the dominant paradigm remains off-policy: students train on static teacher-generated data and never encounter their own errors during learning. This train--test mismatch, an instance of exposure bias, causes prediction errors to compound autoregressively at inference time. On-Policy Distillation (OPD) addresses this by letting the student generate its own trajectories and receive teacher feedback on these self-generated outputs, grounding distillation in the theory of interactive imitation learning. Despite rapid growth spanning divergence minimization, reward-guided learning, and self-play, the OPD literature remains fragmented with no unified treatment. This survey provides the first comprehensive overview of OPD for LLMs. We introduce a unified f-divergence framework over on-policy samples and organize the landscape along three orthogonal dimensions: feedback signal (logit-based, outcome-based, or self-play), teacher access (white-box, black-box, or teacher-free), and loss granularity (token-level, sequence-level, or hybrid). We systematically analyze representative methods, examine industrial deployments, and identify open problems including distillation scaling laws, uncertainty-aware feedback, and agent-level distillation.

  • 2 authors
·
Apr 1 2

Power law graph attention: exact generalization of scaled dot-product attention, empirical collapse at inference

The Large Language Model from Power Law Decoder Representations (PLDR-LLM) and its attention, Power Law Graph Attention (PLGA), replace the fixed bilinear form of scaled dot-product attention (SDPA) with a learned, input-generated bilinear operator G_{LM}, built from a positive tensor A_{LM} by elementwise power laws. The architecture is fully specified, verified against pinned reference releases; claims are labeled theorem, conditional theorem, measurement, or conjecture. Unconditionally: PLGA contains SDPA exactly at G_{LM}=I; A_{LM} and A_P are strictly entrywise positive, with Perron-Frobenius structure on A_{LM}; the DAG regularizer has the NOTEARS walk-counting form and positivity obstructs exact acyclicity; and, under nonresonance (satisfied by standard rotary frequencies), a commutant criterion identifies which operators preserve relative-position dependence. An inference-collapse theorem: exact input invariance of deductive outputs collapses inference to generalized SDPA with a constant operator. Measured invariance: relative fluctuations of 10^{-6} and below; perturbation bounds quantify but do not certify cached inference; the assembled proxy misses the decoding margin. A conditional three-stage mechanism (rotary twirl, concentration, row-map contraction) is measured on a released checkpoint. Blockwise training and scoring under the global Gram are stated with explicit target exposure; on tested samples, block and sequential scoring select identical answers and agree on the published TruthfulQA probability-mass metric within 5times 10^{-5} per item. Self-organized criticality enters as a phenomenological framework with an intrinsic order parameter; open claims become falsifiable conjectures. Selected proof cores are machine-checked in Lean 4.

Leveraging Online Olympiad-Level Math Problems for LLMs Training and Contamination-Resistant Evaluation

Advances in Large Language Models (LLMs) have sparked interest in their ability to solve Olympiad-level math problems. However, the training and evaluation of these models are constrained by the limited size and quality of available datasets, as creating large-scale data for such advanced problems requires extensive effort from human experts. In addition, current benchmarks are prone to contamination, leading to unreliable evaluations. In this paper, we present an automated pipeline that leverages the rich resources of the Art of Problem Solving (AoPS) forum, which predominantly features Olympiad-level problems and community-driven solutions. Using open-source LLMs, we develop a method to extract question-answer pairs from the forum, resulting in AoPS-Instruct, a dataset of more than 600,000 high-quality QA pairs. Our experiments demonstrate that fine-tuning LLMs on AoPS-Instruct improves their reasoning abilities across various benchmarks. Moreover, we build an automatic pipeline that introduces LiveAoPSBench, an evolving evaluation set with timestamps, derived from the latest forum data, providing a contamination-resistant benchmark for assessing LLM performance. Notably, we observe a significant decline in LLM performance over time, suggesting their success on older examples may stem from pre-training exposure rather than true reasoning ability. Our work presents a scalable approach to creating and maintaining large-scale, high-quality datasets for advanced math reasoning, offering valuable insights into the capabilities and limitations of LLMs in this domain. Our benchmark and code is available at https://github.com/DSL-Lab/aops

  • 6 authors
·
Jan 24, 2025

Contrastive Learning with Adversarial Perturbations for Conditional Text Generation

Recently, sequence-to-sequence (seq2seq) models with the Transformer architecture have achieved remarkable performance on various conditional text generation tasks, such as machine translation. However, most of them are trained with teacher forcing with the ground truth label given at each time step, without being exposed to incorrectly generated tokens during training, which hurts its generalization to unseen inputs, that is known as the "exposure bias" problem. In this work, we propose to mitigate the conditional text generation problem by contrasting positive pairs with negative pairs, such that the model is exposed to various valid or incorrect perturbations of the inputs, for improved generalization. However, training the model with naive contrastive learning framework using random non-target sequences as negative examples is suboptimal, since they are easily distinguishable from the correct output, especially so with models pretrained with large text corpora. Also, generating positive examples requires domain-specific augmentation heuristics which may not generalize over diverse domains. To tackle this problem, we propose a principled method to generate positive and negative samples for contrastive learning of seq2seq models. Specifically, we generate negative examples by adding small perturbations to the input sequence to minimize its conditional likelihood, and positive examples by adding large perturbations while enforcing it to have a high conditional likelihood. Such "hard" positive and negative pairs generated using our method guides the model to better distinguish correct outputs from incorrect ones. We empirically show that our proposed method significantly improves the generalization of the seq2seq on three text generation tasks - machine translation, text summarization, and question generation.

  • 3 authors
·
Dec 14, 2020

Safety and accuracy follow different scaling laws in clinical large language models

Clinical LLMs are often scaled by increasing model size, context length, retrieval complexity, or inference-time compute, with the implicit expectation that higher accuracy implies safer behavior. This assumption is incomplete in medicine, where a few confident, high-risk, or evidence-contradicting errors can matter more than average benchmark performance. We introduce SaFE-Scale, a framework for measuring how clinical LLM safety changes across model scale, evidence quality, retrieval strategy, context exposure, and inference-time compute. To instantiate this framework, we introduce RadSaFE-200, a Radiology Safety-Focused Evaluation benchmark of 200 multiple-choice questions with clinician-defined clean evidence, conflict evidence, and option-level labels for high-risk error, unsafe answer, and evidence contradiction. We evaluated 34 locally deployed LLMs across six deployment conditions: closed-book prompting (zero-shot), clean evidence, conflict evidence, standard RAG, agentic RAG, and max-context prompting. Clean evidence produced the strongest improvement, increasing mean accuracy from 73.5% to 94.1%, while reducing high-risk error from 12.0% to 2.6%, contradiction from 12.7% to 2.3%, and dangerous overconfidence from 8.0% to 1.6%. Standard RAG and agentic RAG did not reproduce this safety profile: agentic RAG improved accuracy over standard RAG and reduced contradiction, but high-risk error and dangerous overconfidence remained elevated. Max-context prompting increased latency without closing the safety gap, and additional inference-time compute produced only limited gains. Worst-case analysis showed that clinically consequential errors concentrated in a small subset of questions. Clinical LLM safety is therefore not a passive consequence of scaling, but a deployment property shaped by evidence quality, retrieval design, context construction, and collective failure behavior.

  • 12 authors
·
May 4

AnyFlow: Any-Step Video Diffusion Model with On-Policy Flow Map Distillation

Few-step video generation has been significantly advanced by consistency distillation. However, the performance of consistency-distilled models often degrades as more sampling steps are allocated at test time, limiting their effectiveness for any-step video diffusion. This limitation arises because consistency distillation replaces the original probability-flow ODE trajectory with a consistency-sampling trajectory, weakening the desirable test-time scaling behavior of ODE sampling. To address this limitation, we introduce AnyFlow, the first any-step video diffusion distillation framework based on flow maps. Instead of distilling a model for only a few fixed sampling steps, AnyFlow optimizes the full ODE sampling trajectory. To this end, we shift the distillation target from endpoint consistency mapping (z_{t}rightarrow z_{0}) to flow-map transition learning (z_{t}rightarrow z_{r}) over arbitrary time intervals. We further propose Flow Map Backward Simulation, which decomposes a full Euler rollout into shortcut flow-map transitions, enabling efficient on-policy distillation that reduces test-time errors (i.e., discretization error in few-step sampling and exposure bias in causal generation). Extensive experiments across both bidirectional and causal architectures, at scales ranging from 1.3B to 14B parameters, demonstrate that AnyFlow achieves performance matches or surpasses consistency-based counterparts in the few-step regime, while scaling with sampling step budgets.

nvidia NVIDIA
·
May 12 2

Sequential quantum simulation of spin chains with a single circuit QED device

Quantum simulation of many-body systems in materials science and chemistry are promising application areas for quantum computers. However, the limited scale and coherence of near-term quantum processors pose a significant obstacle to realizing this potential. Here, we theoretically outline how a single-circuit quantum electrodynamics (cQED) device, consisting of a transmon qubit coupled to a long-lived cavity mode, can be used to simulate the ground state of a highly-entangled quantum many-body spin chain. We exploit recently developed methods for implementing quantum operations to sequentially build up a matrix product state (MPS) representation of a many-body state. This approach re-uses the transmon qubit to read out the state of each spin in the chain and exploits the large state space of the cavity as a quantum memory encoding inter-site correlations and entanglement. We show, through simulation, that analog (pulse-level) control schemes can accurately prepare a known MPS representation of a quantum critical spin chain in significantly less time than digital (gate-based) methods, thereby reducing the exposure to decoherence. We then explore this analog-control approach for the variational preparation of an unknown ground state. We demonstrate that the large state space of the cavity can be used to replace multiple qubits in a qubit-only architecture, and could therefore simplify the design of quantum processors for materials simulation. We explore the practical limitations of realistic noise and decoherence and discuss avenues for scaling this approach to more complex problems that challenge classical computational methods.

  • 5 authors
·
Aug 29, 2023

Adversarial Gradient Forcing for Robust Few-Step Autoregressive Video Generation

Autoregressive video generation models generate videos sequentially, with each new block conditioned on previously generated blocks. By training on the model's own rollouts, Self Forcing and its follow-up methods substantially mitigate exposure bias caused by the mismatch between training- and inference-time history distributions. However, these models still suffer from error accumulation during long-horizon generation. We identify a key underlying limitation: the model remains highly sensitive to errors in its generated history, allowing small deviations to be amplified through subsequent generations. We refer to this underexplored problem as the local history robustness gap. To address this gap, we introduce Adversarial Gradient Forcing (AGF), a framework designed to improve the robustness of few-step autoregressive video models to perturbations and accumulated errors in their own generated histories. AGF uses distribution matching gradients from future block predictions to select adversarial perturbations of self-generated histories. It then jointly trains the generator on the original and perturbed histories to improve the robustness of future generation. Extensive experiments show that AGF achieves the highest VBench Total score on 60-second video generation and the best visual quality on four-minute video generation. Notably, AGF achieves such long-horizon robustness while requiring only 5-second rollouts for training.

  • 10 authors
·
Oct 9

Out-of-Distribution Detection & Applications With Ablated Learned Temperature Energy

As deep neural networks become adopted in high-stakes domains, it is crucial to be able to identify when inference inputs are Out-of-Distribution (OOD) so that users can be alerted of likely drops in performance and calibration despite high confidence. Among many others, existing methods use the following two scores to do so without training on any apriori OOD examples: a learned temperature and an energy score. In this paper we introduce Ablated Learned Temperature Energy (or "AbeT" for short), a method which combines these prior methods in novel ways with effective modifications. Due to these contributions, AbeT lowers the False Positive Rate at 95% True Positive Rate (FPR@95) by 35.39% in classification (averaged across all ID and OOD datasets measured) compared to state of the art without training networks in multiple stages or requiring hyperparameters or test-time backward passes. We additionally provide empirical insights as to how our model learns to distinguish between In-Distribution (ID) and OOD samples while only being explicitly trained on ID samples via exposure to misclassified ID examples at training time. Lastly, we show the efficacy of our method in identifying predicted bounding boxes and pixels corresponding to OOD objects in object detection and semantic segmentation, respectively - with an AUROC increase of 5.15% in object detection and both a decrease in FPR@95 of 41.48% and an increase in AUPRC of 34.20% on average in semantic segmentation compared to previous state of the art.

  • 6 authors
·
Jan 22, 2024

Qwen3Guard Technical Report

As large language models (LLMs) become more capable and widely used, ensuring the safety of their outputs is increasingly critical. Existing guardrail models, though useful in static evaluation settings, face two major limitations in real-world applications: (1) they typically output only binary "safe/unsafe" labels, which can be interpreted inconsistently across diverse safety policies, rendering them incapable of accommodating varying safety tolerances across domains; and (2) they require complete model outputs before performing safety checks, making them fundamentally incompatible with streaming LLM inference, thereby preventing timely intervention during generation and increasing exposure to harmful partial outputs. To address these challenges, we present Qwen3Guard, a series of multilingual safety guardrail models with two specialized variants: Generative Qwen3Guard, which casts safety classification as an instruction-following task to enable fine-grained tri-class judgments (safe, controversial, unsafe); and Stream Qwen3Guard, which introduces a token-level classification head for real-time safety monitoring during incremental text generation. Both variants are available in three sizes (0.6B, 4B, and 8B parameters) and support up to 119 languages and dialects, providing comprehensive, scalable, and low-latency safety moderation for global LLM deployments. Evaluated across English, Chinese, and multilingual benchmarks, Qwen3Guard achieves state-of-the-art performance in both prompt and response safety classification. All models are released under the Apache 2.0 license for public use.

Qwen Qwen
·
Oct 16, 2025 2

Computational Long Exposure Mobile Photography

Long exposure photography produces stunning imagery, representing moving elements in a scene with motion-blur. It is generally employed in two modalities, producing either a foreground or a background blur effect. Foreground blur images are traditionally captured on a tripod-mounted camera and portray blurred moving foreground elements, such as silky water or light trails, over a perfectly sharp background landscape. Background blur images, also called panning photography, are captured while the camera is tracking a moving subject, to produce an image of a sharp subject over a background blurred by relative motion. Both techniques are notoriously challenging and require additional equipment and advanced skills. In this paper, we describe a computational burst photography system that operates in a hand-held smartphone camera app, and achieves these effects fully automatically, at the tap of the shutter button. Our approach first detects and segments the salient subject. We track the scene motion over multiple frames and align the images in order to preserve desired sharpness and to produce aesthetically pleasing motion streaks. We capture an under-exposed burst and select the subset of input frames that will produce blur trails of controlled length, regardless of scene or camera motion velocity. We predict inter-frame motion and synthesize motion-blur to fill the temporal gaps between the input frames. Finally, we composite the blurred image with the sharp regular exposure to protect the sharpness of faces or areas of the scene that are barely moving, and produce a final high resolution and high dynamic range (HDR) photograph. Our system democratizes a capability previously reserved to professionals, and makes this creative style accessible to most casual photographers. More information and supplementary material can be found on our project webpage: https://motion-mode.github.io/

  • 6 authors
·
Aug 2, 2023

TDCOSMO XVII. New time delays in 22 lensed quasars from optical monitoring with the ESO-VST 2.6m and MPG 2.2m telescopes

We present new time delays, the main ingredient of time delay cosmography, for 22 lensed quasars resulting from high-cadence r-band monitoring on the 2.6 m ESO VLT Survey Telescope and Max-Planck-Gesellschaft 2.2 m telescope. Each lensed quasar was typically monitored for one to four seasons, often shared between the two telescopes to mitigate the interruptions forced by the COVID-19 pandemic. The sample of targets consists of 19 quadruply and 3 doubly imaged quasars, which received a total of 1 918 hours of on-sky time split into 21 581 wide-field frames, each 320 seconds long. In a given field, the 5-{\sigma} depth of the combined exposures typically reaches the 27th magnitude, while that of single visits is 24.5 mag - similar to the expected depth of the upcoming Vera-Rubin LSST. The fluxes of the different lensed images of the targets were reliably de-blended, providing not only light curves with photometric precision down to the photon noise limit, but also high-resolution models of the targets whose features and astrometry were systematically confirmed in Hubble Space Telescope imaging. This was made possible thanks to a new photometric pipeline, lightcurver, and the forward modelling method STARRED. Finally, the time delays between pairs of curves and their uncertainties were estimated, taking into account the degeneracy due to microlensing, and for the first time the full covariance matrices of the delay pairs are provided. Of note, this survey, with 13 square degrees, has applications beyond that of time delays, such as the study of the structure function of the multiple high-redshift quasars present in the footprint at a new high in terms of both depth and frequency. The reduced images will be available through the European Southern Observatory Science Portal.

  • 32 authors
·
Apr 3, 2025

ExposureEngine: Oriented Logo Detection and Sponsor Visibility Analytics in Sports Broadcasts

Quantifying sponsor visibility in sports broadcasts is a critical marketing task traditionally hindered by manual, subjective, and unscalable analysis methods. While automated systems offer an alternative, their reliance on axis-aligned Horizontal Bounding Box (HBB) leads to inaccurate exposuremetrics when logos appear rotated or skewed due to dynamic camera angles and perspective distortions. This paper introduces ExposureEngine, an end-to-end system designed for accurate, rotation-aware sponsor visibility analytics in sports broadcasts, demonstrated in a soccer case study. Our approach predicts Oriented Bounding Box (OBB) to provide a geometrically precise fit to each logo regardless of the orientation on-screen. To train and evaluate our detector, we developed a new dataset comprising 1,103 frames from Swedish elite soccer, featuring 670 unique sponsor logos annotated with OBBs. Our model achieves a mean Average Precision (mAP@0.5) of 0.859, with a precision of 0.96 and recall of 0.87, demonstrating robust performance in localizing logos under diverse broadcast conditions. The system integrates these detections into an analytical pipeline that calculates precise visibility metrics, such as exposure duration and on-screen coverage. Furthermore, we incorporate a language-driven agentic layer, enabling users to generate reports, summaries, and media content through natural language queries. The complete system, including the dataset and the analytics dashboard, provides a comprehensive solution for auditable and interpretable sponsor measurement in sports media. An overview of the ExposureEngine is available online: https://youtu.be/tRw6OBISuW4 .

  • 8 authors
·
Oct 6, 2025

UltraFusion: Ultra High Dynamic Imaging using Exposure Fusion

Capturing high dynamic range (HDR) scenes is one of the most important issues in camera design. Majority of cameras use exposure fusion technique, which fuses images captured by different exposure levels, to increase dynamic range. However, this approach can only handle images with limited exposure difference, normally 3-4 stops. When applying to very high dynamic scenes where a large exposure difference is required, this approach often fails due to incorrect alignment or inconsistent lighting between inputs, or tone mapping artifacts. In this work, we propose UltraFusion, the first exposure fusion technique that can merge input with 9 stops differences. The key idea is that we model the exposure fusion as a guided inpainting problem, where the under-exposed image is used as a guidance to fill the missing information of over-exposed highlight in the over-exposed region. Using under-exposed image as a soft guidance, instead of a hard constrain, our model is robust to potential alignment issue or lighting variations. Moreover, utilizing the image prior of the generative model, our model also generates natural tone mapping, even for very high-dynamic range scene. Our approach outperforms HDR-Transformer on latest HDR benchmarks. Moreover, to test its performance in ultra high dynamic range scene, we capture a new real-world exposure fusion benchmark, UltraFusion Dataset, with exposure difference up to 9 stops, and experiments show that \model~can generate beautiful and high-quality fusion results under various scenarios. An online demo is provided at https://openimaginglab.github.io/UltraFusion/.

  • 8 authors
·
Jan 20, 2025

UNICE: Training A Universal Image Contrast Enhancer

Existing image contrast enhancement methods are typically designed for specific tasks such as under-/over-exposure correction, low-light and backlit image enhancement, etc. The learned models, however, exhibit poor generalization performance across different tasks, even across different datasets of a specific task. It is important to explore whether we can learn a universal and generalized model for various contrast enhancement tasks. In this work, we observe that the common key factor of these tasks lies in the need of exposure and contrast adjustment, which can be well-addressed if high-dynamic range (HDR) inputs are available. We hence collect 46,928 HDR raw images from public sources, and render 328,496 sRGB images to build multi-exposure sequences (MES) and the corresponding pseudo sRGB ground-truths via multi-exposure fusion. Consequently, we train a network to generate an MES from a single sRGB image, followed by training another network to fuse the generated MES into an enhanced image. Our proposed method, namely UNiversal Image Contrast Enhancer (UNICE), is free of costly human labeling. However, it demonstrates significantly stronger generalization performance than existing image contrast enhancement methods across and within different tasks, even outperforming manually created ground-truths in multiple no-reference image quality metrics. The dataset, code and model are available at https://github.com/BeyondHeaven/UNICE.

  • 2 authors
·
Jul 22, 2025

The Right Memory in the Wrong Context: Verifying Retrieval Admissibility in Long-Term Agent Memory

Long-term-memory agents can retrieve relevant information that is inadmissible for the current request because it belongs to another principal, violates policy, or reflects an incompatible lifecycle state. Recall and final-answer accuracy do not reveal this: a route can appear safe by missing required evidence, while a correct answer may follow inadmissible prompt exposure. We introduce a retrieval-admissibility verification framework that assigns each memory-query pair one of three statuses (admissible, inadmissible, or unresolved), compares routes at matched required-evidence recall with bounds for unresolved cases, and tracks memory IDs through prompt exposure while linking exposure to target-level disclosure. We evaluate its stages on separate, non-pooled populations. A post-hoc top-20 reanalysis of frozen rankings from two public long-term-memory benchmarks, RHELM and MemOps, covers 3,767 queries. All released anchors lie within trusted query namespaces; with within-namespace scores unchanged, off-namespace filtering cannot lower their ranks. Top-20 anchor recall increases from 0.432 to 0.533, 80% recall feasibility from 0.237 to 0.311, and exact similarity evaluations decrease by 98.3%. In a frozen 72-case development diagnostic, a released-metadata reference preserves required evidence, whereas neither text-only verifier detects violations under the 1% required-anchor false-denial limit. Across 1,523 paired benchmark-native cases, namespace routing is associated with judged-accuracy gains of 0.053-0.068 across three readers; recall also changes, so this comparison is observational. In 16 controlled exposure scenarios, only one of four reader-specific 95% confidence intervals excludes zero for relevant-inadmissible literal disclosure (+0.156, 95% CI [0.031, 0.312]). Results motivate separate verification of candidate support, admissibility, prompt exposure, and answer disclosure.

  • 5 authors
·
Oct 4