Daily Papers

Robust navigation in cluttered environments remains a fundamental challenge for quadrotors, particularly when strong wind disturbances arise, which perturb vehicle dynamics, limit control authority, and substantially increase collision risk. Existing learning-based navigation policies typically rely on obstacle perception and proprioceptive observations, requiring the policy to infer time-varying disturbance effects implicitly and thereby limiting robustness under partial observability. This paper proposes WAND (Wind-Aware Navigation with Disturbance Estimation), a reinforcement learning framework for navigation under time-varying wind disturbances in dense obstacle fields. Specifically, WAND estimates wind-induced disturbance acceleration from historical proprioceptive states using a Temporal Convolutional Network (TCN). This estimation is integrated into the policy via a zero-initialized residual module, WindAdapter, while simultaneously providing feedforward compensation for low-level control. The dual use of the estimate couples disturbance-conditioned navigation with feedforward disturbance rejection. Across 12 wind-disturbed simulation settings, WAND improved the observed success rate by 8.3 percentage points on average relative to feedforward compensation alone. Controlled opposite-crosswind experiments further showed wind-direction-dependent trajectory adaptation. In indoor fan-induced flight tests, WAND succeeded in 18 of 20 trials, demonstrating the feasibility of real-time onboard navigation.

Feedforward computation, such as evaluating a neural network or sampling from an autoregressive model, is ubiquitous in machine learning. The sequential nature of feedforward computation, however, requires a strict order of execution and cannot be easily accelerated with parallel computing. To enable parallelization, we frame the task of feedforward computation as solving a system of nonlinear equations. We then propose to find the solution using a Jacobi or Gauss-Seidel fixed-point iteration method, as well as hybrid methods of both. Crucially, Jacobi updates operate independently on each equation and can be executed in parallel. Our method is guaranteed to give exactly the same values as the original feedforward computation with a reduced (or equal) number of parallelizable iterations, and hence reduced time given sufficient parallel computing power. Experimentally, we demonstrate the effectiveness of our approach in accelerating (i) backpropagation of RNNs, (ii) evaluation of DenseNets, and (iii) autoregressive sampling of MADE and PixelCNN++, with speedup factors between 2.1 and 26 under various settings.

Feedforward steering control is a key component of hierarchical control architectures for autonomous racing. The goal is to reduce steering corrections from the feedback controllers by predicting the vehicle's inverse lateral dynamics. This paper presents a systematic benchmark of two learning-based and two empirical (analytical) feedforward steering controllers. We introduce a new ehd formulation based on a polynomial surface fit that captures velocity-dependent nonlinear steering behavior with minimal parametrization. We test the feedforward controllers in a high-fidelity simulation framework based on the real-world Abu Dhabi Autonomous Racing League competition, using a high-fidelity double-track vehicle dynamics simulator. Open-loop evaluation shows that the learning-based controllers achieve the lowest prediction errors; however, closed-loop testing reveals that this improved accuracy does not translate into superior path tracking performance or lap times, even after iterative fine-tuning. In contrast, the proposed EHD approach achieves the best overall closed-loop robustness and lap time, highlighting the necessity of evaluating feedforward strategies within the complete trajectory planning and control software stack. Our code is available at https://github.com/TUMRT/steering_ff_control.

Forward-Forward (FF) training allows each layer to learn from a local goodness criterion. In cumulative-goodness variants, however, later layers can inherit a task that earlier layers have already partially separated. We formalize this phenomenon as layer free-riding: under the softplus FF criterion, the class-discrimination gradient reaching block d decays exponentially with the positive margin accumulated by preceding blocks. We then study three local remedies -- per-block, hardness-gated, and depth-scaled -- that recover current-layer separation measures without relying on backpropagated gradients. On CIFAR-10 and CIFAR-100, these remedies dramatically improve layer-separation statistics, with 4times--45times gains in deeper layers, while changing accuracy by less than one percentage point for non-degenerate training procedures. Tiny ImageNet provides a tougher cross-dataset check for our selected block-wise configuration and reveals the same qualitative gap between layer-health diagnostics and final accuracy. Calibration experiments further show that architecture and augmentation choices have a larger effect on final accuracy than the training-rule modifications studied here. Cumulative free-riding is therefore a real and repairable optimization pathology. Nonetheless, for the FF training rules, architectures, and datasets we study, it is not the dominant factor limiting achievable accuracy.

We propose a scalable Forward-Forward (FF) algorithm that eliminates the need for backpropagation by training each layer separately. Unlike backpropagation, FF avoids backward gradients and can be more modular and memory efficient, making it appealing for large networks. We extend FF to modern convolutional architectures, such as MobileNetV3 and ResNet18, by introducing a new way to compute losses for convolutional layers. Experiments show that our method achieves performance comparable to standard backpropagation. Furthermore, when we divide the network into blocks, such as the residual blocks in ResNet, and apply backpropagation only within each block, but not across blocks, our hybrid design tends to outperform backpropagation baselines while maintaining a similar training speed. Finally, we present experiments on small datasets and transfer learning that confirm the adaptability of our method.

Fast feedforward networks (FFFs) are a class of neural networks that exploit the observation that different regions of the input space activate distinct subsets of neurons in wide networks. FFFs partition the input space into separate sections using a differentiable binary tree of neurons and during inference descend the binary tree in order to improve computational efficiency. Inspired by Mixture of Experts (MoE) research, we propose the incorporation of load balancing and Master Leaf techniques into the FFF architecture to improve performance and simplify the training process. We reproduce experiments found in literature and present results on FFF models enhanced using these techniques. The proposed architecture and training recipe achieves up to 16.3% and 3% absolute classification accuracy increase in training and test accuracy, respectively, compared to the original FFF architecture. Additionally, we observe a smaller variance in the results compared to those reported in prior research. These findings demonstrate the potential of integrating MoE-inspired techniques into FFFs for developing more accurate and efficient models.

Given the variety of the visual world there is not one true scale for recognition: objects may appear at drastically different sizes across the visual field. Rather than enumerate variations across filter channels or pyramid levels, dynamic models locally predict scale and adapt receptive fields accordingly. The degree of variation and diversity of inputs makes this a difficult task. Existing methods either learn a feedforward predictor, which is not itself totally immune to the scale variation it is meant to counter, or select scales by a fixed algorithm, which cannot learn from the given task and data. We extend dynamic scale inference from feedforward prediction to iterative optimization for further adaptivity. We propose a novel entropy minimization objective for inference and optimize over task and structure parameters to tune the model to each input. Optimization during inference improves semantic segmentation accuracy and generalizes better to extreme scale variations that cause feedforward dynamic inference to falter.

This paper presents the Adaptive Personalized Control System (APECS) architecture, a novel framework for human-in-the-loop control. An architecture is developed which defines appropriate constraints for the system objectives. A method for enacting Lipschitz and sector bounds on the resulting controller is derived to ensure desirable control properties. An analysis of worst-case loss functions and the optimal loss function weighting is made to implement an effective training scheme. Finally, simulations are carried out to demonstrate the effectiveness of the proposed architecture. This architecture resulted in a 4.5% performance increase compared to the human operator and 9% to an unconstrained feedforward neural network trained in the same way.

"Forward-only" algorithms, which train neural networks while avoiding a backward pass, have recently gained attention as a way of solving the biologically unrealistic aspects of backpropagation. Here, we first address compelling challenges related to the "forward-only" rules, which include reducing the performance gap with backpropagation and providing an analytical understanding of their dynamics. To this end, we show that the forward-only algorithm with top-down feedback is well-approximated by an "adaptive-feedback-alignment" algorithm, and we analytically track its performance during learning in a prototype high-dimensional setting. Then, we compare different versions of forward-only algorithms, focusing on the Forward-Forward and PEPITA frameworks, and we show that they share the same learning principles. Overall, our work unveils the connections between three key neuro-inspired learning rules, providing a link between "forward-only" algorithms, i.e., Forward-Forward and PEPITA, and an approximation of backpropagation, i.e., Feedback Alignment.

The aim of this paper is to introduce a new learning procedure for neural networks and to demonstrate that it works well enough on a few small problems to be worth further investigation. The Forward-Forward algorithm replaces the forward and backward passes of backpropagation by two forward passes, one with positive (i.e. real) data and the other with negative data which could be generated by the network itself. Each layer has its own objective function which is simply to have high goodness for positive data and low goodness for negative data. The sum of the squared activities in a layer can be used as the goodness but there are many other possibilities, including minus the sum of the squared activities. If the positive and negative passes could be separated in time, the negative passes could be done offline, which would make the learning much simpler in the positive pass and allow video to be pipelined through the network without ever storing activities or stopping to propagate derivatives.

Forward Gradients - the idea of using directional derivatives in forward differentiation mode - have recently been shown to be utilizable for neural network training while avoiding problems generally associated with backpropagation gradient computation, such as locking and memorization requirements. The cost is the requirement to guess the step direction, which is hard in high dimensions. While current solutions rely on weighted averages over isotropic guess vector distributions, we propose to strongly bias our gradient guesses in directions that are much more promising, such as feedback obtained from small, local auxiliary networks. For a standard computer vision neural network, we conduct a rigorous study systematically covering a variety of combinations of gradient targets and gradient guesses, including those previously presented in the literature. We find that using gradients obtained from a local loss as a candidate direction drastically improves on random noise in Forward Gradient methods.

Diffusion probabilistic models (DPMs) have shown remarkable performance in visual synthesis but are computationally expensive due to the need for multiple evaluations during the sampling. Recent predictor-corrector diffusion samplers have significantly reduced the required number of function evaluations (NFE), but inherently suffer from a misalignment issue caused by the extra corrector step, especially with a large classifier-free guidance scale (CFG). In this paper, we introduce a new fast DPM sampler called DC-Solver, which leverages dynamic compensation (DC) to mitigate the misalignment of the predictor-corrector samplers. The dynamic compensation is controlled by compensation ratios that are adaptive to the sampling steps and can be optimized on only 10 datapoints by pushing the sampling trajectory toward a ground truth trajectory. We further propose a cascade polynomial regression (CPR) which can instantly predict the compensation ratios on unseen sampling configurations. Additionally, we find that the proposed dynamic compensation can also serve as a plug-and-play module to boost the performance of predictor-only samplers. Extensive experiments on both unconditional sampling and conditional sampling demonstrate that our DC-Solver can consistently improve the sampling quality over previous methods on different DPMs with a wide range of resolutions up to 1024times1024. Notably, we achieve 10.38 FID (NFE=5) on unconditional FFHQ and 0.394 MSE (NFE=5, CFG=7.5) on Stable-Diffusion-2.1. Code is available at https://github.com/wl-zhao/DC-Solver

We consider image transformation problems, where an input image is transformed into an output image. Recent methods for such problems typically train feed-forward convolutional neural networks using a per-pixel loss between the output and ground-truth images. Parallel work has shown that high-quality images can be generated by defining and optimizing perceptual loss functions based on high-level features extracted from pretrained networks. We combine the benefits of both approaches, and propose the use of perceptual loss functions for training feed-forward networks for image transformation tasks. We show results on image style transfer, where a feed-forward network is trained to solve the optimization problem proposed by Gatys et al in real-time. Compared to the optimization-based method, our network gives similar qualitative results but is three orders of magnitude faster. We also experiment with single-image super-resolution, where replacing a per-pixel loss with a perceptual loss gives visually pleasing results.

Feedforward neural networks are widely used as universal predictive models to fit data distribution. Common gradient-based learning, however, suffers from many drawbacks making the training process ineffective and time-consuming. Alternative randomized learning does not use gradients but selects hidden node parameters randomly. This makes the training process extremely fast. However, the problem in randomized learning is how to determine the random parameters. A recently proposed method uses autoencoders for unsupervised parameter learning. This method showed superior performance on classification tasks. In this work, we apply this method to regression problems, and, finding that it has some drawbacks, we show how to improve it. We propose a learning method of autoencoders that controls the produced random weights. We also propose how to determine the biases of hidden nodes. We empirically compare autoencoder based learning with other randomized learning methods proposed recently for regression and find that despite the proposed improvement of the autoencoder based learning, it does not outperform its competitors in fitting accuracy. Moreover, the method is much more complex than its competitors.

Backpropagation, which uses the chain rule, is the de-facto standard algorithm for optimizing neural networks nowadays. Recently, Hinton (2022) proposed the forward-forward algorithm, a promising alternative that optimizes neural nets layer-by-layer, without propagating gradients throughout the network. Although such an approach has several advantages over back-propagation and shows promising results, the fact that each layer is being trained independently limits the optimization process. Specifically, it prevents the network's layers from collaborating to learn complex and rich features. In this work, we study layer collaboration in the forward-forward algorithm. We show that the current version of the forward-forward algorithm is suboptimal when considering information flow in the network, resulting in a lack of collaboration between layers of the network. We propose an improved version that supports layer collaboration to better utilize the network structure, while not requiring any additional assumptions or computations. We empirically demonstrate the efficacy of the proposed version when considering both information flow and objective metrics. Additionally, we provide a theoretical motivation for the proposed method, inspired by functional entropy theory.

The Backpropagation algorithm has often been criticised for its lack of biological realism. In an attempt to find a more biologically plausible alternative, the recently introduced Forward-Forward algorithm replaces the forward and backward passes of Backpropagation with two forward passes. In this work, we show that the internal representations obtained by the Forward-Forward algorithm can organise into category-specific ensembles exhibiting high sparsity -- composed of a low number of active units. This situation is reminiscent of what has been observed in cortical sensory areas, where neuronal ensembles are suggested to serve as the functional building blocks for perception and action. Interestingly, while this sparse pattern does not typically arise in models trained with standard Backpropagation, it can emerge in networks trained with Backpropagation on the same objective proposed for the Forward-Forward algorithm.

Model families train every size from scratch. Can a pretrained large model be converted into a smaller sibling? We characterize the 1.4B->410M conversion in the Pythia family end-to-end: (i) representations align strongly across sizes (ridge R^2=0.84) while parameters align weakly; (ii) dense weight projection is functionally destructive -- provably not an assembly artifact -- because basis mixing breaks rotary, per-head, GELU, and LayerNorm structure; (iii) after the best-fit linear operator, weight residuals are statistically indistinguishable from noise under shuffle controls; (iv) conversion value therefore lives in initialization. In matched-budget continued pre-training we decompose conversion into two independent levers -- least-squares compensation (function: best zero-shot) and variance-preserving rescale (dynamics: best endpoints). Compensation is a token-efficient, low-budget win rather than a universal one: at 30M tokens it beats the strongest subcloning variant on both a width-reduced pair (84.0 +/- 1.8 vs. 89.7 +/- 3.7, 3/3 seeds) and a held-out depth-reduced pair (109.3 vs. 117.9, 3/3 seeds), reaching a given quality with fewer tokens; at a 33x larger budget the two converge to parity (40.0 vs. 40.0), both far ahead of from-scratch, which transfer initialization always beats -- by up to 18x at low budget, the margin narrowing at convergence and at the largest scale. We further map the method's boundary: at ~5x the donor scale (6.9B->1.4B) stacking both levers over-corrects, which we trace to ill-conditioning of the compensation solve at large width, pointing to dimension-aware regularization as the fix. Code, checkpoints, and the frozen evaluation corpus are released.

We break the linear link between the layer size and its inference cost by introducing the fast feedforward (FFF) architecture, a log-time alternative to feedforward networks. We demonstrate that FFFs are up to 220x faster than feedforward networks, up to 6x faster than mixture-of-experts networks, and exhibit better training properties than mixtures of experts thanks to noiseless conditional execution. Pushing FFFs to the limit, we show that they can use as little as 1% of layer neurons for inference in vision transformers while preserving 94.2% of predictive performance.

Feed-forward 3D reconstruction offers substantial runtime advantages over per-scene optimization, which remains slow at inference and often fragile under sparse views. However, existing feed-forward methods still have potential for further performance gains, especially for out-of-domain data, and struggle to retain second-level inference time once a generative prior is introduced. These limitations stem from the one-shot prediction paradigm in existing feed-forward pipeline: models are strictly bounded by capacity, lack inference-time refinement, and are ill-suited for continuously injecting generative priors. We introduce GIFSplat, a purely feed-forward iterative refinement framework for 3D Gaussian Splatting from sparse unposed views. A small number of forward-only residual updates progressively refine current 3D scene using rendering evidence, achieve favorable balance between efficiency and quality. Furthermore, we distill a frozen diffusion prior into Gaussian-level cues from enhanced novel renderings without gradient backpropagation or ever-increasing view-set expansion, thereby enabling per-scene adaptation with generative prior while preserving feed-forward efficiency. Across DL3DV, RealEstate10K, and DTU, GIFSplat consistently outperforms state-of-the-art feed-forward baselines, improving PSNR by up to +2.1 dB, and it maintains second-scale inference time without requiring camera poses or any test-time gradient optimization.

3D reconstruction and view synthesis are foundational problems in computer vision, graphics, and immersive technologies such as augmented reality (AR), virtual reality (VR), and digital twins. Traditional methods rely on computationally intensive iterative optimization in a complex chain, limiting their applicability in real-world scenarios. Recent advances in feed-forward approaches, driven by deep learning, have revolutionized this field by enabling fast and generalizable 3D reconstruction and view synthesis. This survey offers a comprehensive review of feed-forward techniques for 3D reconstruction and view synthesis, with a taxonomy according to the underlying representation architectures including point cloud, 3D Gaussian Splatting (3DGS), Neural Radiance Fields (NeRF), etc. We examine key tasks such as pose-free reconstruction, dynamic 3D reconstruction, and 3D-aware image and video synthesis, highlighting their applications in digital humans, SLAM, robotics, and beyond. In addition, we review commonly used datasets with detailed statistics, along with evaluation protocols for various downstream tasks. We conclude by discussing open research challenges and promising directions for future work, emphasizing the potential of feed-forward approaches to advance the state of the art in 3D vision.

Despite its widespread use in neural networks, error backpropagation has faced criticism for its lack of biological plausibility, suffering from issues such as the backward locking problem and the weight transport problem. These limitations have motivated researchers to explore more biologically plausible learning algorithms that could potentially shed light on how biological neural systems adapt and learn. Inspired by the counter-current exchange mechanisms observed in biological systems, we propose counter-current learning (CCL), a biologically plausible framework for credit assignment in neural networks. This framework employs a feedforward network to process input data and a feedback network to process targets, with each network enhancing the other through anti-parallel signal propagation. By leveraging the more informative signals from the bottom layer of the feedback network to guide the updates of the top layer of the feedforward network and vice versa, CCL enables the simultaneous transformation of source inputs to target outputs and the dynamic mutual influence of these transformations. Experimental results on MNIST, FashionMNIST, CIFAR10, and CIFAR100 datasets using multi-layer perceptrons and convolutional neural networks demonstrate that CCL achieves comparable performance to other biologically plausible algorithms while offering a more biologically realistic learning mechanism. Furthermore, we showcase the applicability of our approach to an autoencoder task, underscoring its potential for unsupervised representation learning. Our work presents a direction for biologically inspired and plausible learning algorithms, offering an alternative mechanism of learning and adaptation in neural networks.

Supervised fine-tuning (SFT) is an efficient approach for downstream task adaptation and often serves as the initialization stage for reinforcement learning (RL), but it can show weaker generalization than RL. A key limitation is its off-policy objective: SFT fits fixed demonstrations token by token, including targets poorly aligned with the model's pretrained distribution, which can lead to overfitting. A recent line of work addresses this issue by assigning larger training weights to tokens better aligned with the current model's predictive distribution, with the intuition that fitting these tokens are less distortive to the model's pretrained knowledge and representations. However, computing the token weights from the model that is currently fine-tuned entangles token weights with the optimization trajectory, inducing a self-reinforcing dynamics as the distribution rapidly departs from the pretrained model. To address this, we propose PriFT (Prior-support guided Fine-Tuning), which derives token weights from a frozen pretrained reference to obtain a stable reweighting signal unaffected by fine-tuning. This signal estimates prior support: the extent to which each target token is supported by the pretrained distribution. Across multiple existing token-reweighting rules, replacing the reweighting signal from the online model to pretrained model consistently improves performance. We introduce two instantiations: PriFT-prob uses pretrained token probability, while PriFT-mass selects tokens by cumulative probability mass under the pretrained distribution. Extensive experiments on mathematical reasoning, code generation, and medical question answering show that PriFT achieves state-of-the-art results among SFT baselines and provides a better initialization for subsequent RL training.

As machine learning has moved towards leveraging large models as priors for downstream tasks, the community has debated the right form of prior for solving reinforcement learning (RL) problems. If one were to try to prefetch as much computation as possible, they would attempt to learn a prior over the policies for some yet-to-be-determined reward function. Recent work (forward-backward (FB) representation learning) has tried this, arguing that an unsupervised representation learning procedure can enable optimal control over arbitrary rewards without further fine-tuning. However, FB's training objective and learning behavior remain mysterious. In this paper, we demystify FB by clarifying when such representations can exist, what its objective optimizes, and how it converges in practice. We draw connections with rank matching, fitted Q-evaluation, and contraction mapping. Our analysis suggests a simplified unsupervised pre-training method for RL that, instead of enabling optimal control, performs one step of policy improvement. We call our proposed method one-step forward-backward representation learning (one-step FB). Experiments in didactic settings, as well as in 10 state-based and image-based continuous control domains, demonstrate that one-step FB converges to errors 10^5 smaller and improves zero-shot performance by +24% on average. Our project website is available at https://chongyi-zheng.github.io/onestep-fb.

Backward Filtering Forward Guiding (BFFG) is a bidirectional algorithm proposed in Mider et al. [2021] and studied more in depth in a general setting in Van der Meulen and Schauer [2022]. In category theory, optics have been proposed for modelling systems with bidirectional data flow. We connect BFFG with optics and prove that different ways of composing the building blocks of BFFG correspond to equivalent optics.

Long-tailed learning has garnered increasing attention due to its practical significance. Among the various approaches, the fine-tuning paradigm has gained considerable interest with the advent of foundation models. However, most existing methods primarily focus on leveraging knowledge from these models, overlooking the inherent biases introduced by the imbalanced training data they rely on. In this paper, we examine how such imbalances from pre-training affect long-tailed downstream tasks. Specifically, we find the imbalance biases inherited in foundation models on downstream task as parameter imbalance and data imbalance. During fine-tuning, we observe that parameter imbalance plays a more critical role, while data imbalance can be mitigated using existing re-balancing strategies. Moreover, we find that parameter imbalance cannot be effectively addressed by current re-balancing techniques, such as adjusting the logits, during training, unlike data imbalance. To tackle both imbalances simultaneously, we build our method on causal learning and view the incomplete semantic factor as the confounder, which brings spurious correlations between input samples and labels. To resolve the negative effects of this, we propose a novel backdoor adjustment method that learns the true causal effect between input samples and labels, rather than merely fitting the correlations in the data. Notably, we achieve an average performance increase of about 1.67% on each dataset.

Graph neural networks (GNNs) have achieved remarkable success across a wide range of applications, such as recommendation, drug discovery, and question answering. Behind the success of GNNs lies the backpropagation (BP) algorithm, which is the de facto standard for training deep neural networks (NNs). However, despite its effectiveness, BP imposes several constraints, which are not only biologically implausible, but also limit the scalability, parallelism, and flexibility in learning NNs. Examples of such constraints include storage of neural activities computed in the forward pass for use in the subsequent backward pass, and the dependence of parameter updates on non-local signals. To address these limitations, the forward-forward algorithm (FF) was recently proposed as an alternative to BP in the image classification domain, which trains NNs by performing two forward passes over positive and negative data. Inspired by this advance, we propose ForwardGNN in this work, a new forward learning procedure for GNNs, which avoids the constraints imposed by BP via an effective layer-wise local forward training. ForwardGNN extends the original FF to deal with graph data and GNNs, and makes it possible to operate without generating negative inputs (hence no longer forward-forward). Further, ForwardGNN enables each layer to learn from both the bottom-up and top-down signals without relying on the backpropagation of errors. Extensive experiments on real-world datasets show the effectiveness and generality of the proposed forward graph learning framework. We release our code at https://github.com/facebookresearch/forwardgnn.

The Forward-Forward (FF) algorithm trains networks layer-by-layer using a local "goodness function," yet sum-of-squares (SoS) has remained the only choice studied. We systematically explore the goodness-function design space and identify a unifying principle: the goodness function must be sensitive to the shape of neural activity, not its total energy. This principle is motivated by the observation that deep network activations follow heavy-tailed distributions and that discriminative information is often concentrated in peak activities. We propose two complementary families: selective functions (top-k, entmax-weighted energy) that measure only peak activity, and shape-sensitive functions (excess kurtosis / "burstiness" and higher-order moments) that reward heavy-tailed distributions via scale-invariant statistics. Combined with separate label-feature forwarding (FFCL), controlled experiments across 13 goodness functions, 5 activations, 6 datasets, and three continuous sweeps, each tracing a characteristic inverted-U, yield 89.0% on Fashion-MNIST and 98.2+-0.1% on MNIST (4x2000), a +32.6pp gain over SoS, with consistent improvements across all benchmarks (+72pp USPS, +52pp SVHN). The scale-invariant nature of burstiness makes it particularly robust to magnitude shifts across layers and datasets.

We present AdvantageFlow, a forward-process reinforcement learning (RL) algorithm for rectified flow models. The algorithm minimizes an advantage-weighted prediction loss, which maximizes reward, regularized by the rollout policy, which convexifies the objective and makes its optimization stable. Our objective can be viewed as fitting a local reward-improving target distribution. The rollout regularization arises as a variance reduction step. We evaluate AdvantageFlow empirically on text-to-image generation with Stable Diffusion 3.5 Medium and FLUX.1, and compare it to both forward- and reverse-process RL algorithms.

Feed-forward 3D modeling has emerged as a promising approach for rapid and high-quality 3D reconstruction. In particular, directly generating explicit 3D representations, such as 3D Gaussian splatting, has attracted significant attention due to its fast and high-quality rendering, as well as numerous applications. However, many state-of-the-art methods, primarily based on transformer architectures, suffer from severe scalability issues because they rely on full attention across image tokens from multiple input views, resulting in prohibitive computational costs as the number of views or image resolution increases. Toward a scalable and efficient feed-forward 3D reconstruction, we introduce an iterative Large 3D Reconstruction Model (iLRM) that generates 3D Gaussian representations through an iterative refinement mechanism, guided by three core principles: (1) decoupling the scene representation from input-view images to enable compact 3D representations; (2) decomposing fully-attentional multi-view interactions into a two-stage attention scheme to reduce computational costs; and (3) injecting high-resolution information at every layer to achieve high-fidelity reconstruction. Experimental results on widely used datasets, such as RE10K and DL3DV, demonstrate that iLRM outperforms existing methods in both reconstruction quality and speed. Notably, iLRM exhibits superior scalability, delivering significantly higher reconstruction quality under comparable computational cost by efficiently leveraging a larger number of input views.

Feed-forward view synthesis models predict a novel view in a single pass with minimal 3D inductive bias. Existing works encode cameras as Plücker ray maps, which tie predictions to the arbitrary world coordinate gauge and make them sensitive to small camera transformations, thereby undermining geometric consistency. In this paper, we ask what inputs best condition a model for robust and consistent view synthesis. We propose projective conditioning, which replaces raw camera parameters with a target-view projective cue that provides a stable 2D input. This reframes the task from a brittle geometric regression problem in ray space to a well-conditioned target-view image-to-image translation problem. Additionally, we introduce a masked autoencoding pretraining strategy tailored to this cue, enabling the use of large-scale uncalibrated data for pretraining. Our method shows improved fidelity and stronger cross-view consistency compared to ray-conditioned baselines on our view-consistency benchmark. It also achieves state-of-the-art quality on standard novel view synthesis benchmarks.

Lower numerical precision reduces storage and memory traffic but raises the perturbation floor. We study rank compensation: reinvesting saved memory in a larger approximation rank. For matrices, the singular-value error identity yields a directly testable sufficient condition requiring the additional singular component to offset the perturbation from storing the rank-augmented approximation in lower precision. On ten SuiteSparse matrices, all 100 truncation-dominated configurations (50 FP32 and 50 FP16) are certified non-increases and strict accuracy wins, with mean error ratio 0.963 and storage ratios 58.8% and 29.4% relative to the FP64 baseline. FP16 failures occur only in tail-rank stress tests near the perturbation floor. At the largest resident matrix-application batch, compensated FP32 and FP16 achieve geometric-mean A100 speedups of 1.28times and 2.12times; neither accelerates the smallest batch. For Tensor-Train (TT) approximation, we give a conditional a posteriori extension based on the measured truncation gain and rounded-core perturbation. Across three-way and six-way synthetic tests, FP32 and FP16 achieve combined accuracy-memory wins in 10 of 20 and 14 of 20 trials. On public hyperspectral tensors and FROSTT top-active subtensors, the corresponding counts are 44 of 60 and 54 of 60; four FP16 Salinas-A tail-stress cases fail. No certified TT case exceeds the FP64 error beyond numerical tolerance. Reconstruction of six public tensors yields geometric-mean compensated speedups of 1.38times (FP32) and 1.94times (FP16). Timings cover resident downstream kernels, not factorization, transfers, or end-to-end acceleration.

Using backpropagation to compute gradients of objective functions for optimization has remained a mainstay of machine learning. Backpropagation, or reverse-mode differentiation, is a special case within the general family of automatic differentiation algorithms that also includes the forward mode. We present a method to compute gradients based solely on the directional derivative that one can compute exactly and efficiently via the forward mode. We call this formulation the forward gradient, an unbiased estimate of the gradient that can be evaluated in a single forward run of the function, entirely eliminating the need for backpropagation in gradient descent. We demonstrate forward gradient descent in a range of problems, showing substantial savings in computation and enabling training up to twice as fast in some cases.

Conditional diffusion and flow models routinely fail to satisfy the very constraints that define their task. For instance, a depth-conditioned model often produces images whose re-extracted depth disagrees with the input, even though the forward operator--the depth predictor defining the constraint--is available during both training and inference. Existing approaches generally fall into two categories: supervised models that treat the conditioning signal as a static cue and ignore alignment information at inference, and guidance-based methods that consult it through hand-tuned linear updates, typically trading fidelity to the condition against the plausibility of the generated sample. We argue that the fundamental gap in both paradigms is that the model is never trained to utilize its own alignment error. We introduce FlowBender, a closed-loop framework that treats this error as a first-class input, training the network to learn a correction policy conditioned on inference-time feedback. At each step, an unguided look-ahead pass estimates the clean signal, a task-specific deviation is computed via the forward operator, and a refinement pass consumes this signal to produce a corrected velocity. We propose several variants of FlowBender, including a gradient-based formulation for differentiable operators and a zero-order variant for non-differentiable settings such as JPEG compression. For efficient sampling, we introduce a prior-step shortcut that enables closed-loop correction at a minimal additional computational cost. Across image-to-image translation, restoration, and 3D mesh texturing, FlowBender consistently outperforms standard supervised baselines, alignment-loss-augmented training, and state-of-the-art inference-time guidance, improving fidelity and plausibility simultaneously rather than trading them against each other. Project page: https://flow-bender.github.io/

Modern distributed training relies heavily on communication compression to reduce the communication overhead. In this work, we study algorithms employing a popular class of contractive compressors in order to reduce communication overhead. However, the naive implementation often leads to unstable convergence or even exponential divergence due to the compression bias. Error Compensation (EC) is an extremely popular mechanism to mitigate the aforementioned issues during the training of models enhanced by contractive compression operators. Compared to the effectiveness of EC in the data homogeneous regime, the understanding of the practicality and theoretical foundations of EC in the data heterogeneous regime is limited. Existing convergence analyses typically rely on strong assumptions such as bounded gradients, bounded data heterogeneity, or large batch accesses, which are often infeasible in modern machine learning applications. We resolve the majority of current issues by proposing EControl, a novel mechanism that can regulate error compensation by controlling the strength of the feedback signal. We prove fast convergence for EControl in standard strongly convex, general convex, and nonconvex settings without any additional assumptions on the problem or data heterogeneity. We conduct extensive numerical evaluations to illustrate the efficacy of our method and support our theoretical findings.

We present a suite of scalable algorithms for minimizing feedback arcs in large-scale weighted directed graphs, with the goal of revealing biologically meaningful feedforward structure in neural connectomes. Using the FlyWire Connectome Challenge dataset, we demonstrate the effectiveness of our ranking strategies in maximizing the total weight of forward-pointing edges. Our methods integrate greedy heuristics, gain-aware local refinements, and global structural analysis based on strongly connected components. Experiments show that our best solution improves the forward edge weight over previous top-performing methods. All algorithms are implemented efficiently in Python and validated using cloud-based execution on Google Colab Pro+.

Reinforcement learning (RL) post-training improves the reward alignment of flow-based generators, but often degrades perceptual quality in ways that are not captured by the reward proxy. We identify a simple structural signature of this drift: across three post-training methods (NFT, AWM, DPO), RL fine-tuning inflates the per-step velocity norm |v_θ| by 5% to 15% relative to the reference. A form of norm inflation has been studied in classifier-free guidance (CFG), where rescaling the velocity back to a reference norm at inference time can mitigate the resulting artifacts. However, this inference-time correction does not transfer cleanly to RL: rescaling v_θ to match |v_{ref}| at inference time neither improves reward nor fixes the quality degradation, because the inflation is co-adapted into the model weights. Furthermore, an adjoint sensitivity analysis shows that velocity magnitude rescaling carries no coherent first-order reward signal at the batch level, indicating that suppressing norm inflation is unlikely to remove a consistently reward-carrying component. Since inference-time renormalization fails while norm suppression carries no reward cost, training-time intervention is the appropriate strategy. Together, these findings motivate \methodname, a hinge penalty that activates only when |v_θ| exceeds |v_{ref}| and composes additively with any velocity-local base loss. Across two base models, three post-training methods, and two reward proxies, \methodname consistently improves MLLM-judged image quality and forensic realism while preserving reward, with gains that amplify under few-step inference and are not explained by early stopping.

Most downstream adaptation methods tune all or part of the parameters of pre-trained models (PTMs) through gradient descent, where the tuning cost increases linearly with the growth of the model size. By contrast, gradient-free methods only require the forward computation of the PTM to tune the prompt, retaining the benefits of efficient tuning and deployment. Though, past work on gradient-free tuning often introduces gradient descent to seek a good initialization of prompt and lacks versatility across tasks and PTMs. In this paper, we present BBTv2, an improved version of Black-Box Tuning, to drive PTMs for few-shot learning. We prepend continuous prompts to every layer of the PTM and propose a divide-and-conquer gradient-free algorithm to optimize the prompts at different layers alternately. Extensive experiments across various tasks and PTMs show that BBTv2 can achieve comparable performance to full model tuning and state-of-the-art parameter-efficient methods (e.g., Adapter, LoRA, BitFit, etc.) under few-shot settings while maintaining much fewer tunable parameters.

Large pre-trained, zero-shot capable models have shown considerable success both for standard transfer and adaptation tasks, with particular robustness towards distribution shifts. In addition, subsequent fine-tuning can considerably improve performance on a selected downstream task. However, through naive fine-tuning, these zero-shot models lose their generalizability and robustness towards distribution shifts. This is a particular problem for tasks such as Continual Learning (CL), where continuous adaptation has to be performed as new task distributions are introduced sequentially. In this work, we showcase that where fine-tuning falls short to adapt such zero-shot capable models, simple momentum-based weight interpolation can provide consistent improvements for CL tasks in both memory-free and memory-based settings. In particular, we find improvements of over +4% on standard CL benchmarks, while reducing the error to the upper limit of jointly training on all tasks at once in parts by more than half, allowing the continual learner to inch closer to the joint training limits.

New hardware can substantially increase the speed and efficiency of deep neural network training. To guide the development of future hardware architectures, it is pertinent to explore the hardware and machine learning properties of alternative training algorithms. In this work we evaluate the use of small batch, fine-grained Pipelined Backpropagation, an asynchronous pipeline parallel training algorithm that has significant hardware advantages. We introduce two methods, Spike Compensation and Linear Weight Prediction, that effectively mitigate the downsides caused by the asynchronicity of Pipelined Backpropagation and outperform existing techniques in our setting. We show that appropriate normalization and small batch sizes can also aid training. With our methods, fine-grained Pipelined Backpropagation using a batch size of one can match the accuracy of SGD for multiple networks trained on CIFAR-10 and ImageNet. Simple scaling rules allow the use of existing hyperparameters for traditional training without additional tuning.

Language models only really need to use an exponential fraction of their neurons for individual inferences. As proof, we present FastBERT, a BERT variant that uses 0.3\% of its neurons during inference while performing on par with similar BERT models. FastBERT selectively engages just 12 out of 4095 neurons for each layer inference. This is achieved by replacing feedforward networks with fast feedforward networks (FFFs). While no truly efficient implementation currently exists to unlock the full acceleration potential of conditional neural execution, we provide high-level CPU code achieving 78x speedup over the optimized baseline feedforward implementation, and a PyTorch implementation delivering 40x speedup over the equivalent batched feedforward inference. We publish our training code, benchmarking setup, and model weights.

This paper investigates the key role of Feed-Forward Networks (FFNs) in transformer models by utilizing the Parallel Attention and Feed-Forward Net Design (PAF) architecture, and comparing it to their Series Attention and Feed-Forward Net Design (SAF) counterparts. Central to the effectiveness of PAF are two main assumptions regarding the FFN block and the attention block within a layer: 1) the primary function of the FFN block is to maintain isotropy among token embeddings and prevent their degeneration, and 2) the residual norm computed in the attention block is substantially smaller than the input token embedding norm. To empirically validate these assumptions, we train PAF variants of two large language models (RoBERTa-large and bert-large-uncased). Our results demonstrate that both assumptions hold true in the PAF design. This study contributes to a deeper understanding of the roles and interactions between FFNs and self-attention mechanisms in transformer architectures.

In modern large-scale deep learning, a prevalent and effective workflow for solving low-data problems is adapting powerful pre-trained foundation models (FMs) to new tasks via parameter-efficient fine-tuning (PEFT). However, while empirically effective, the resulting solutions lack generalisation guarantees to certify their accuracy - which may be required for ethical or legal reasons prior to deployment in high-importance applications. In this paper we develop a novel transfer learning approach that is designed to facilitate non-vacuous learning theoretic generalisation guarantees for downstream tasks, even in the low-shot regime. Specifically, we first use upstream tasks to train a distribution over PEFT parameters. We then learn the downstream task by a sample-and-evaluate procedure -- sampling plausible PEFTs from the trained diffusion model and selecting the one with the highest likelihood on the downstream data. Crucially, this confines our model hypothesis to a finite set of PEFT samples. In contrast to learning in the typical continuous hypothesis spaces of neural network weights, this facilitates tighter risk certificates. We instantiate our bound and show non-trivial generalization guarantees compared to existing learning approaches which lead to vacuous bounds in the low-shot regime.

Federated learning is an emerging distributed machine learning framework which jointly trains a global model via a large number of local devices with data privacy protections. Its performance suffers from the non-vanishing biases introduced by the local inconsistent optimal and the rugged client-drifts by the local over-fitting. In this paper, we propose a novel and practical method, FedSpeed, to alleviate the negative impacts posed by these problems. Concretely, FedSpeed applies the prox-correction term on the current local updates to efficiently reduce the biases introduced by the prox-term, a necessary regularizer to maintain the strong local consistency. Furthermore, FedSpeed merges the vanilla stochastic gradient with a perturbation computed from an extra gradient ascent step in the neighborhood, thereby alleviating the issue of local over-fitting. Our theoretical analysis indicates that the convergence rate is related to both the communication rounds T and local intervals K with a upper bound small O(1/T) if setting a proper local interval. Moreover, we conduct extensive experiments on the real-world dataset to demonstrate the efficiency of our proposed FedSpeed, which performs significantly faster and achieves the state-of-the-art (SOTA) performance on the general FL experimental settings than several baselines. Our code is available at https://github.com/woodenchild95/FL-Simulator.git.

Federated Learning (FL) models often experience client drift caused by heterogeneous data, where the distribution of data differs across clients. To address this issue, advanced research primarily focuses on manipulating the existing gradients to achieve more consistent client models. In this paper, we present an alternative perspective on client drift and aim to mitigate it by generating improved local models. First, we analyze the generalization contribution of local training and conclude that this generalization contribution is bounded by the conditional Wasserstein distance between the data distribution of different clients. Then, we propose FedImpro, to construct similar conditional distributions for local training. Specifically, FedImpro decouples the model into high-level and low-level components, and trains the high-level portion on reconstructed feature distributions. This approach enhances the generalization contribution and reduces the dissimilarity of gradients in FL. Experimental results show that FedImpro can help FL defend against data heterogeneity and enhance the generalization performance of the model.

Methods based on weight compensation, which iteratively apply quantization and weight compensation to minimize the output error, have recently demonstrated remarkable success in quantizing Large Language Models (LLMs). The representative work, GPTQ, introduces several key techniques that make such iterative methods practical for LLMs with billions of parameters. GPTAQ extends this approach by introducing an asymmetric calibration process that aligns the output of each quantized layer with its full-precision counterpart, incorporating a residual error into the weight compensation framework. In this work, we revisit the formulation of the residual error. We identify a sub-optimal calibration objective in existing methods: during the intra-layer calibration process, they align the quantized output with the output from compensated weights, rather than the true output from the original full-precision model. Therefore, we redefine the objective to precisely align the quantized model's output with the original output of the full-precision model at each step. We then reveal that the residual error originates not only from the output difference of the preceding layer but also from the discrepancy between the compensated and original weights within each layer, which we name the 'compensation-aware error'. By inheriting the neuron decomposition technique from GPTAQ, we can efficiently incorporate this compensation-aware error into the weight update process. Extensive experiments on various LLMs and quantization settings demonstrate that our proposed enhancements integrate seamlessly with both GPTQ and GPTAQ, significantly improving their quantization performance. Our code is publicly available at https://github.com/list0830/ResComp.

Feedforward 3D Gaussian Splatting (3DGS) overcomes the limitations of optimization-based 3DGS by enabling fast and high-quality reconstruction without the need for per-scene optimization. However, existing feedforward approaches typically assume that input multi-view images are clean and high-quality. In real-world scenarios, images are often captured under challenging conditions such as noise, low light, or rain, resulting in inaccurate geometry and degraded 3D reconstruction. To address these challenges, we propose a general and efficient multi-view feature enhancement module, RobustGS, which substantially improves the robustness of feedforward 3DGS methods under various adverse imaging conditions, enabling high-quality 3D reconstruction. The RobustGS module can be seamlessly integrated into existing pretrained pipelines in a plug-and-play manner to enhance reconstruction robustness. Specifically, we introduce a novel component, Generalized Degradation Learner, designed to extract generic representations and distributions of multiple degradations from multi-view inputs, thereby enhancing degradation-awareness and improving the overall quality of 3D reconstruction. In addition, we propose a novel semantic-aware state-space model. It first leverages the extracted degradation representations to enhance corrupted inputs in the feature space. Then, it employs a semantic-aware strategy to aggregate semantically similar information across different views, enabling the extraction of fine-grained cross-view correspondences and further improving the quality of 3D representations. Extensive experiments demonstrate that our approach, when integrated into existing methods in a plug-and-play manner, consistently achieves state-of-the-art reconstruction quality across various types of degradations.

Autoregressive video diffusion models enable real-time streaming video generation. However, errors introduced during self-rollout accumulate over long horizons, manifesting as color drift, motion stagnation, and eventual visual collapse. In this paper, we characterize this phenomenon from a frequency-domain perspective: error accumulation appears as a pronounced energy drift in the low-frequency bands. We further investigate the effectiveness of attention sink in the frequency domain, and find that it improves the video quality by alleviating the spectral energy drift to some extent, but cannot fully resolve it. Motivated by the above analysis, we propose FreqForcing, a training-free framework that addresses error accumulation in long-video generation via Spectral Self-Anchoring (SSA). The proposed SSA leverages the low-frequency components of anchor attention to maintain long-horizon visual stability, while preserving dynamic motion through the high-frequency components of local attention. Our FreqForcing extends Self-Forcing pretrained on 5s clips to two-minute generation, achieving 24x extrapolation. Extensive experiments show that FreqForcing outperforms existing training-free methods quantitatively and qualitatively while remaining competitive with representative training-based approaches.

Given that Transformers are ubiquitous in wide tasks, interpreting their internals is a pivotal issue. Still, their particular components, feed-forward (FF) blocks, have typically been less analyzed despite their substantial parameter amounts. We analyze the input contextualization effects of FF blocks by rendering them in the attention maps as a human-friendly visualization scheme. Our experiments with both masked- and causal-language models reveal that FF networks modify the input contextualization to emphasize specific types of linguistic compositions. In addition, FF and its surrounding components tend to cancel out each other's effects, suggesting potential redundancy in the processing of the Transformer layer.

Zero-shot reinforcement learning (RL) promises to provide agents that can perform any task in an environment after an offline pre-training phase. Forward-backward (FB) representations represent remarkable progress towards this ideal, achieving 85% of the performance of task-specific agents in this setting. However, such performance is contingent on access to large and diverse datasets for pre-training, which cannot be expected for most real problems. Here, we explore how FB performance degrades when trained on small datasets that lack diversity, and mitigate it with conservatism, a well-established feature of performant offline RL algorithms. We evaluate our family of methods across various datasets, domains and tasks, reaching 150% of vanilla FB performance in aggregate. Somewhat surprisingly, conservative FB algorithms also outperform the task-specific baseline, despite lacking access to reward labels and being required to maintain policies for all tasks. Conservative FB algorithms perform no worse than FB on full datasets, and so present little downside over their predecessor. Our code is available open-source via https://enjeeneer.io/projects/conservative-world-models/.

The conventional wisdom behind learning deep classification models is to focus on bad-classified examples and ignore well-classified examples that are far from the decision boundary. For instance, when training with cross-entropy loss, examples with higher likelihoods (i.e., well-classified examples) contribute smaller gradients in back-propagation. However, we theoretically show that this common practice hinders representation learning, energy optimization, and margin growth. To counteract this deficiency, we propose to reward well-classified examples with additive bonuses to revive their contribution to the learning process. This counterexample theoretically addresses these three issues. We empirically support this claim by directly verifying the theoretical results or significant performance improvement with our counterexample on diverse tasks, including image classification, graph classification, and machine translation. Furthermore, this paper shows that we can deal with complex scenarios, such as imbalanced classification, OOD detection, and applications under adversarial attacks because our idea can solve these three issues. Code is available at: https://github.com/lancopku/well-classified-examples-are-underestimated.

Large pre-trained models such as CLIP or ALIGN offer consistent accuracy across a range of data distributions when performing zero-shot inference (i.e., without fine-tuning on a specific dataset). Although existing fine-tuning methods substantially improve accuracy on a given target distribution, they often reduce robustness to distribution shifts. We address this tension by introducing a simple and effective method for improving robustness while fine-tuning: ensembling the weights of the zero-shot and fine-tuned models (WiSE-FT). Compared to standard fine-tuning, WiSE-FT provides large accuracy improvements under distribution shift, while preserving high accuracy on the target distribution. On ImageNet and five derived distribution shifts, WiSE-FT improves accuracy under distribution shift by 4 to 6 percentage points (pp) over prior work while increasing ImageNet accuracy by 1.6 pp. WiSE-FT achieves similarly large robustness gains (2 to 23 pp) on a diverse set of six further distribution shifts, and accuracy gains of 0.8 to 3.3 pp compared to standard fine-tuning on seven commonly used transfer learning datasets. These improvements come at no additional computational cost during fine-tuning or inference.

Feed-forward layers constitute two-thirds of a transformer model's parameters, yet their role in the network remains under-explored. We show that feed-forward layers in transformer-based language models operate as key-value memories, where each key correlates with textual patterns in the training examples, and each value induces a distribution over the output vocabulary. Our experiments show that the learned patterns are human-interpretable, and that lower layers tend to capture shallow patterns, while upper layers learn more semantic ones. The values complement the keys' input patterns by inducing output distributions that concentrate probability mass on tokens likely to appear immediately after each pattern, particularly in the upper layers. Finally, we demonstrate that the output of a feed-forward layer is a composition of its memories, which is subsequently refined throughout the model's layers via residual connections to produce the final output distribution.

When the performance of a machine learning model varies over groups defined by sensitive attributes (e.g., gender or ethnicity), the performance disparity can be expressed in terms of the probability distributions of the input and output variables over each group. In this paper, we exploit this fact to reduce the disparate impact of a fixed classification model over a population of interest. Given a black-box classifier, we aim to eliminate the performance gap by perturbing the distribution of input variables for the disadvantaged group. We refer to the perturbed distribution as a counterfactual distribution, and characterize its properties for common fairness criteria. We introduce a descent algorithm to learn a counterfactual distribution from data. We then discuss how the estimated distribution can be used to build a data preprocessor that can reduce disparate impact without training a new model. We validate our approach through experiments on real-world datasets, showing that it can repair different forms of disparity without a significant drop in accuracy.

Backpropagation is the standard method for achieving state-of-the-art accuracy in neural network training, but it often imposes high memory costs and lacks biological plausibility. In this paper, we introduce the Mono-Forward algorithm, a purely local layerwise learning method inspired by Hinton's Forward-Forward framework. Unlike backpropagation, Mono-Forward optimizes each layer solely with locally available information, eliminating the reliance on global error signals. We evaluated Mono-Forward on multi-layer perceptrons and convolutional neural networks across multiple benchmarks, including MNIST, Fashion-MNIST, CIFAR-10, and CIFAR-100. The test results show that Mono-Forward consistently matches or surpasses the accuracy of backpropagation across all tasks, with significantly reduced and more even memory usage, better parallelizability, and a comparable convergence rate.

Supervised fine-tuning (SFT) provides the standard approach for teaching LLMs new behaviors from offline expert demonstrations. However, standard SFT uniformly fits all samples -- including those with low likelihood under the base model -- which can disproportionately drive training updates toward overfitting specific samples rather than learning the target behavior. Moreover, adapting to these unlikely samples induces substantial policy shifts that degrade prior capabilities. Existing methods mitigate this by filtering, regenerating, or down-weighting low-likelihood data. In doing so, they often suppress precisely the novel behaviors the base model has yet to learn. We propose InfoSFT, a principled weighting scheme for the SFT objective that concentrates learning signals on maximally informative, medium-confidence tokens -- those neither overly familiar to the base model nor too unlikely to cause instability. Requiring only a one-line modification to the standard token-wise loss, InfoSFT demonstrably improves generalization over vanilla SFT and likelihood-weighted baselines across math, code, and chain-of-thought tasks with diverse model families, while better preserving pre-existing capabilities.

Post-training quantization (PTQ) offers an efficient approach to compressing large language models (LLMs), significantly reducing memory access and computational costs. Existing compensation-based weight calibration methods often rely on a second-order Taylor expansion to model quantization error, under the assumption that the first-order term is negligible in well-trained full-precision models. However, we reveal that the progressive compensation process introduces accumulated first-order deviations between latent weights and their full-precision counterparts, making this assumption fundamentally flawed. To address this, we propose FOEM, a novel PTQ method that explicitly incorporates first-order gradient terms to improve quantization error compensation. FOEM approximates gradients by performing a first-order Taylor expansion around the pre-quantization weights. This yields an approximation based on the difference between latent and full-precision weights as well as the Hessian matrix. When substituted into the theoretical solution, the formulation eliminates the need to explicitly compute the Hessian, thereby avoiding the high computational cost and limited generalization of backpropagation-based gradient methods. This design introduces only minimal additional computational overhead. Extensive experiments across a wide range of models and benchmarks demonstrate that FOEM consistently outperforms the classical GPTQ method. In 3-bit weight-only quantization, FOEM reduces the perplexity of Llama3-8B by 17.3% and increases the 5-shot MMLU accuracy from 53.8% achieved by GPTAQ to 56.1%. Moreover, FOEM can be seamlessly combined with advanced techniques such as SpinQuant, delivering additional gains under the challenging W4A4KV4 setting and further narrowing the performance gap with full-precision baselines, surpassing existing state-of-the-art methods.

Nonlinear sufficient dimension reductionlibing_generalSDR, which constructs nonlinear low-dimensional representations to summarize essential features of high-dimensional data, is an important branch of representation learning. However, most existing methods are not applicable when the response variables are complex non-Euclidean random objects, which are frequently encountered in many recent statistical applications. In this paper, we introduce a new statistical dependence measure termed Fr\'echet Cumulative Covariance (FCCov) and develop a novel nonlinear SDR framework based on FCCov. Our approach is not only applicable to complex non-Euclidean data, but also exhibits robustness against outliers. We further incorporate Feedforward Neural Networks (FNNs) and Convolutional Neural Networks (CNNs) to estimate nonlinear sufficient directions in the sample level. Theoretically, we prove that our method with squared Frobenius norm regularization achieves unbiasedness at the sigma-field level. Furthermore, we establish non-asymptotic convergence rates for our estimators based on FNNs and ResNet-type CNNs, which match the minimax rate of nonparametric regression up to logarithmic factors. Intensive simulation studies verify the performance of our methods in both Euclidean and non-Euclidean settings. We apply our method to facial expression recognition datasets and the results underscore more realistic and broader applicability of our proposal.

Classifier-free guidance (CFG) typically applies a shared scale to all latent tokens, although their velocity predictions evolve differently during sampling. We introduce Trajectory-Adaptive Classifier-Free Guidance (TrajCFG), a training-free method for flow-matching models that adapts token-wise guidance using historical changes in guided velocity direction. TrajCFG maps this feedback to bounded scales, assigning stronger guidance to larger directional changes and weaker guidance to more consistent directions. It combines adjacent-step and interval-normalized longer-span feedback, reusing standard CFG predictions without additional model evaluations. Controlled diagnostics and ablations examine the roles of directional feedback, token-wise allocation, and history-span fusion. Experiments on text-to-video, image-to-video, text-to-audio-video, text-to-image, and image-to-3D generation show improvements over base samplers across multiple backbones. For text-to-video generation, TrajCFG improves VBench Total scores by 0.30-0.75 points over the strongest evaluated baseline on each of three backbones. These results support historical directional feedback as a broadly applicable signal for fine-grained guidance allocation. The project page is available at https://jyliu-98.github.io/trajcfg-project-page/.

We present an efficient frequency-based neural representation termed PREF: a shallow MLP augmented with a phasor volume that covers significant border spectra than previous Fourier feature mapping or Positional Encoding. At the core is our compact 3D phasor volume where frequencies distribute uniformly along a 2D plane and dilate along a 1D axis. To this end, we develop a tailored and efficient Fourier transform that combines both Fast Fourier transform and local interpolation to accelerate na\"ive Fourier mapping. We also introduce a Parsvel regularizer that stables frequency-based learning. In these ways, Our PREF reduces the costly MLP in the frequency-based representation, thereby significantly closing the efficiency gap between it and other hybrid representations, and improving its interpretability. Comprehensive experiments demonstrate that our PREF is able to capture high-frequency details while remaining compact and robust, including 2D image generalization, 3D signed distance function regression and 5D neural radiance field reconstruction.

In audio signal processing, learnable front-ends have shown strong performance across diverse tasks by optimizing task-specific representation. However, their parameters remain fixed once trained, lacking flexibility during inference and limiting robustness under dynamic complex acoustic environments. In this paper, we introduce a novel adaptive paradigm for audio front-ends that replaces static parameterization with a closed-loop neural controller. Specifically, we simplify the learnable front-end LEAF architecture and integrate a neural controller for adaptive representation via dynamically tuning Per-Channel Energy Normalization. The neural controller leverages both the current and the buffered past subband energies to enable input-dependent adaptation during inference. Experimental results on multiple audio classification tasks demonstrate that the proposed adaptive front-end consistently outperforms prior fixed and learnable front-ends under both clean and complex acoustic conditions. These results highlight neural adaptability as a promising direction for the next generation of audio front-ends.

Backpropagation (BP), a foundational algorithm for training artificial neural networks, predominates in contemporary deep learning. Although highly successful, it is often considered biologically implausible. A significant limitation arises from the need for precise symmetry between connections in the backward and forward pathways to backpropagate gradient signals accurately, which is not observed in biological brains. Researchers have proposed several algorithms to alleviate this symmetry constraint, such as feedback alignment and direct feedback alignment. However, their divergence from backpropagation dynamics presents challenges, particularly in deeper networks and convolutional layers. Here we introduce the Product Feedback Alignment (PFA) algorithm. Our findings demonstrate that PFA closely approximates BP and achieves comparable performance in deep convolutional networks while avoiding explicit weight symmetry. Our results offer a novel solution to the longstanding weight symmetry problem, leading to more biologically plausible learning in deep convolutional networks compared to earlier methods.

Probabilistic models are typically trained using task-agnostic objectives like log-loss, which can lead to significant errors in downstream estimation. This disconnect is especially critical in Inverse Probability Weighting (IPW) for causal inference, where propensity score errors near 0 and 1 often lead to high bias and variance. We propose a principled framework for deriving task-specific strictly proper scoring rules by matching the local curvature of the downstream error metric. We apply this to the Average Treatment Effect (ATE) estimation, deriving a closed-form loss and its corresponding canonical probability mapping that can be readily integrated with any model like a neural network or a gradient boosting algorithm. Extensive evaluations on causal inference benchmarks demonstrate that our tailored objective consistently outperforms standard likelihood-based and covariate-balancing approaches.

Reward models score responses from large language models (LLMs) and guide LLM training toward human preferences. However, reward models can favor superficial attributes such as length or confidence, leading LLMs to produce higher-scoring but not more correct responses. Existing mitigation methods either retrain the reward model or apply a fixed correction to one known bias, such as a preference for longer responses. Retraining requires additional data and computational resources, while existing editing methods require the target bias to be specified in advance and use a fixed edit for that bias. To this end, we propose BiasReducer, a lightweight framework that edits only the linear reward head and selects the relevant edits for each new dataset. First, BiasReducer uses a sparse autoencoder (SAE)-style encoder to learn which attributes (e.g., length and confidence) the reward model is sensitive to. Second, it learns how to reduce the reward model's dependence on each attribute by determining which direction to adjust the reward head and how much to adjust it. Third, for a new dataset, it ranks the attributes by their influence on reward scores, selects the relevant ones, and edits the reward model accordingly. BiasReducer consistently improves reward-model robustness to biases toward superficial response attributes. Across five reward models, BiasReducer-M improves the three benchmarks by 8.3, 18.0, and 6.9 percentage points on average, outperforming the two training-based baselines. The gains transfer downstream, reducing unnecessary verbosity and sycophancy while maintaining comparable judged quality.

Large pre-trained models have exhibited remarkable achievements across various domains. The substantial training costs associated with these models have led to wide studies of fine-tuning for effectively harnessing their capabilities in solving downstream tasks. Yet, conventional fine-tuning approaches become infeasible when the model lacks access to downstream data due to privacy concerns. Naively integrating fine-tuning approaches with the emerging federated learning frameworks incurs substantial communication overhead and exerts high demand on local computing resources, making it impractical for common resource-limited devices. In this paper, we introduce SFPrompt, an innovative privacy-preserving fine-tuning method tailored for the federated setting where direct uploading of raw data is prohibited and local devices are resource-constrained to run a complete pre-trained model. In essence, SFPrompt judiciously combines split learning with federated learning to handle these challenges. Specifically, the pre-trained model is first partitioned into client and server components, thereby streamlining the client-side model and substantially alleviating computational demands on local resources. SFPrompt then introduces soft prompts into the federated model to enhance the fine-tuning performance. To further reduce communication costs, a novel dataset pruning algorithm and a local-loss update strategy are devised during the fine-tuning process. Extensive experiments demonstrate that SFPrompt delivers competitive performance as the federated full fine-tuning approach while consuming a mere 0.46% of local computing resources and incurring 53% less communication cost.

The increasing use of foundation models highlights the urgent need to address and eliminate implicit biases present in them that arise during pretraining. In this paper, we introduce PEFTDebias, a novel approach that employs parameter-efficient fine-tuning (PEFT) to mitigate the biases within foundation models. PEFTDebias consists of two main phases: an upstream phase for acquiring debiasing parameters along a specific bias axis, and a downstream phase where these parameters are incorporated into the model and frozen during the fine-tuning process. By evaluating on four datasets across two bias axes namely gender and race, we find that downstream biases can be effectively reduced with PEFTs. In addition, we show that these parameters possess axis-specific debiasing characteristics, enabling their effective transferability in mitigating biases in various downstream tasks. To ensure reproducibility, we release the code to do our experiments.

On NVIDIA Blackwell B200, tensor-core throughput outpaces special-function exponential throughput by more than two orders of magnitude, exposing exponential evaluation in fused attention kernels. A pretrained Transformer, however, may not need it evaluated accurately at every element. We characterize what a pretrained model does need by approximating softmax at inference in ten frozen decoder-only models (0.5B-72B). The number of positions the softmax map assigns probability to and within-row resolution can be cut substantially, yet uniform weighting of the same positions is damaging. Where a fixed resolution budget is placed matters as much as its size, with resolution near the row maximum consistently favored. Perturbations matched on scalar distortion produce model-dependent responses of opposite sign. These findings motivate Rowmax-PoT, a coarse logarithmic weight representation anchored at each row maximum, and Rowmax-H15, its hardware specialization in FlashAttention-4. On B200, the patched FP8 attention forward is 12.4% faster at causal 8K and 25.8% faster at non-causal 8K in host-side call-latency measurements; board energy per forward falls by 8.4% at causal 16K. Measured separately on the BF16 kernel path at 2K, Rowmax-H15 increases perplexity by 0.091-0.492% across five models from three families.

Reconstructing 3D representations from 2D inputs is a fundamental task in computer vision and graphics, serving as a cornerstone for understanding and interacting with the physical world. While traditional methods achieve high fidelity, they are limited by slow per-scene optimization or category-specific training, which hinders their practical deployment and scalability. Hence, generalizable feed-forward 3D reconstruction has witnessed rapid development in recent years. By learning a model that maps images directly to 3D representations in a single forward pass, these methods enable efficient reconstruction and robust cross-scene generalization. Our survey is motivated by a critical observation: despite the diverse geometric output representations, ranging from implicit fields to explicit primitives, existing feed-forward approaches share similar high-level architectural patterns, such as image feature extraction backbones, multi-view information fusion mechanisms, and geometry-aware design principles. Consequently, we abstract away from these representation differences and instead focus on model design, proposing a novel taxonomy centered on model design strategies that are agnostic to the output format. Our proposed taxonomy organizes the research directions into five key problems that drive recent research development: feature enhancement, geometry awareness, model efficiency, augmentation strategies and temporal-aware models. To support this taxonomy with empirical grounding and standardized evaluation, we further comprehensively review related benchmarks and datasets, and extensively discuss and categorize real-world applications based on feed-forward 3D models. Finally, we outline future directions to address open challenges such as scalability, evaluation standards, and world modeling.

Reward fine-tuning aims to update a pre-trained flow-based generative model to improve the downstream reward of its generated samples. Existing methods typically formulate this problem as sampling from a reward-tilted distribution, the solution to a KL-regularized reward-maximization problem. Here, we introduce an optimal transport regularizer built directly from the pre-trained drift. Unlike KL reward tilting, the resulting objective transports individual samples toward higher reward rather than reweighting the base distribution. We show that the resulting problem is equivalent to a deterministic optimal control problem on the flow. Given a pre-trained flow map, this equivalence yields a simulation-free reinforcement learning algorithm for fine-tuning generative flows. We call the resulting framework Wasserstein-Tilted Flow Maps (WTF), the first end-to-end fine-tuning recipe native to flow maps. The output is a fine-tuned flow map that retains strong reward-aligned performance at few-step inference budgets without post-hoc distillation. Experiments on ImageNet-256 and text-to-image show that WTF achieves higher reward with comparable or higher diversity than baselines, while requiring up to 280times less training compute. More broadly, we argue that accelerated samplers such as flow maps are essential infrastructure for efficient post-training, and that the dominant KL-regularized formulation is only one of many choices worth revisiting.

Transfer learning with a small amount of target data is an effective and common approach to adapting a pre-trained model to distribution shifts. In some situations, target data labels may be expensive to obtain, so we may only have access to a limited number of target data points. To make the most of a very small target dataset, we propose a lightweight, sample-efficient approach that learns a diverse set of features and adapts to a target distribution by interpolating these features. Our approach, Project and Probe (Pro^2), first learns a linear projection that maps a pre-trained embedding onto orthogonal directions while being predictive of labels in the source dataset. The goal of this step is to learn a variety of predictive features, so that at least some of them remain useful after distribution shift. Pro^2 then learns a linear classifier on top of these projected features using a small target dataset. Theoretically, we find that Pro^2 results in more sample-efficient generalization by inducing a favorable bias-variance tradeoff. Our experiments on four datasets, with multiple distribution shift settings for each, show that Pro^2 improves performance by 5-15% when given limited target data compared to prior methods such as standard linear probing.

The pretrain-finetune paradigm has shown outstanding performance on many applications of deep learning, where a model is pre-trained on a upstream large dataset (e.g. ImageNet), and is then fine-tuned to different downstream tasks. Though for most cases, the pre-training stage is conducted based on supervised methods, recent works on self-supervised pre-training have shown powerful transferability and even outperform supervised pre-training on multiple downstream tasks. It thus remains an open question how to better generalize supervised pre-training model to downstream tasks. In this paper, we argue that the worse transferability of existing supervised pre-training methods arise from the negligence of valuable intra-class semantic difference. This is because these methods tend to push images from the same class close to each other despite of the large diversity in their visual contents, a problem to which referred as "overfit of upstream tasks". To alleviate this problem, we propose a new supervised pre-training method based on Leave-One-Out K-Nearest-Neighbor, or LOOK for short. It relieves the problem of overfitting upstream tasks by only requiring each image to share its class label with most of its k nearest neighbors, thus allowing each class to exhibit a multi-mode distribution and consequentially preserving part of intra-class difference for better transferring to downstream tasks. We developed efficient implementation of the proposed method that scales well to large datasets. Experimental studies on multiple downstream tasks show that LOOK outperforms other state-of-the-art methods for supervised and self-supervised pre-training.

The rising computational and energy demands of deep neural networks (DNNs), driven largely by backpropagation (BP), challenge sustainable AI development. This paper rigorously investigates three BP-free training methods: the Forward-Forward (FF), Cascaded-Forward (CaFo), and Mono-Forward (MF) algorithms, tracing their progression from foundational concepts to a demonstrably superior solution. A robust comparative framework was established: each algorithm was implemented on its native architecture (MLPs for FF and MF, a CNN for CaFo) and benchmarked against an equivalent BP-trained model. Hyperparameters were optimized with Optuna, and consistent early stopping criteria were applied based on validation performance, ensuring all models were optimally tuned before comparison. Results show that MF not only competes with but consistently surpasses BP in classification accuracy on its native MLPs. Its superior generalization stems from converging to a more favorable minimum in the validation loss landscape, challenging the assumption that global optimization is required for state-of-the-art results. Measured at the hardware level using the NVIDIA Management Library (NVML) API, MF reduces energy consumption by up to 41% and shortens training time by up to 34%, translating to a measurably smaller carbon footprint as estimated by CodeCarbon. Beyond this primary result, we present a hardware-level analysis that explains the efficiency gains: exposing FF's architectural inefficiencies, validating MF's computationally lean design, and challenging the assumption that all BP-free methods are inherently more memory-efficient. By documenting the evolution from FF's conceptual groundwork to MF's synthesis of accuracy and sustainability, this work offers a clear, data-driven roadmap for future energy-efficient deep learning.

Recent developments in large-scale machine learning suggest that by scaling up data, model size and training time properly, one might observe that improvements in pre-training would transfer favorably to most downstream tasks. In this work, we systematically study this phenomena and establish that, as we increase the upstream accuracy, the performance of downstream tasks saturates. In particular, we investigate more than 4800 experiments on Vision Transformers, MLP-Mixers and ResNets with number of parameters ranging from ten million to ten billion, trained on the largest scale of available image data (JFT, ImageNet21K) and evaluated on more than 20 downstream image recognition tasks. We propose a model for downstream performance that reflects the saturation phenomena and captures the nonlinear relationship in performance of upstream and downstream tasks. Delving deeper to understand the reasons that give rise to these phenomena, we show that the saturation behavior we observe is closely related to the way that representations evolve through the layers of the models. We showcase an even more extreme scenario where performance on upstream and downstream are at odds with each other. That is, to have a better downstream performance, we need to hurt upstream accuracy.

Transformers, particularly Vision Transformers (ViTs), have achieved state-of-the-art performance in large-scale image classification. However, they often require large amounts of data and can exhibit biases that limit their robustness and generalizability. This paper introduces ForAug, a novel data augmentation scheme that addresses these challenges and explicitly includes inductive biases, which commonly are part of the neural network architecture, into the training data. ForAug is constructed by using pretrained foundation models to separate and recombine foreground objects with different backgrounds, enabling fine-grained control over image composition during training. It thus increases the data diversity and effective number of training samples. We demonstrate that training on ForNet, the application of ForAug to ImageNet, significantly improves the accuracy of ViTs and other architectures by up to 4.5 percentage points (p.p.) on ImageNet and 7.3 p.p. on downstream tasks. Importantly, ForAug enables novel ways of analyzing model behavior and quantifying biases. Namely, we introduce metrics for background robustness, foreground focus, center bias, and size bias and show that training on ForNet substantially reduces these biases compared to training on ImageNet. In summary, ForAug provides a valuable tool for analyzing and mitigating biases, enabling the development of more robust and reliable computer vision models. Our code and dataset are publicly available at https://github.com/tobna/ForAug.

Quantization is a promising method that reduces memory usage and computational intensity of Deep Neural Networks (DNNs), but it often leads to significant output error that hinder model deployment. In this paper, we propose Bias Compensation (BC) to minimize the output error, thus realizing ultra-low-precision quantization without model fine-tuning. Instead of optimizing the non-convex quantization process as in most previous methods, the proposed BC bypasses the step to directly minimize the quantizing output error by identifying a bias vector for compensation. We have established that the minimization of output error through BC is a convex problem and provides an efficient strategy to procure optimal solutions associated with minimal output error,without the need for training or fine-tuning. We conduct extensive experiments on Vision Transformer models and Large Language Models, and the results show that our method notably reduces quantization output error, thereby permitting ultra-low-precision post-training quantization and enhancing the task performance of models. Especially, BC improves the accuracy of ViT-B with 4-bit PTQ4ViT by 36.89% on the ImageNet-1k task, and decreases the perplexity of OPT-350M with 3-bit GPTQ by 5.97 on WikiText2.The code is in https://github.com/GongCheng1919/bias-compensation.

Supervised fine-tuning (SFT) learns most aggressively from tokens that the model deems least likely. This helps acquire new behaviors, but also amplifies noisy or conflicting supervision and can overwrite useful pretrained knowledge. Through a unified policy-loss view, we revisit existing token-reweighting methods and show that they assign nonnegative coefficients to demonstrated tokens. Consequently, they can suppress or amplify supervised updates, but cannot reverse harmful features once learned. Moreover, larger training weights do not amount to feature extrapolation, since they change the optimization trajectory rather than scale a fixed SFT direction. We argue that reversal and extrapolation require a stable reference frame defined by a fixed SFT delta. Motivated by this, we propose SCALE (Selective Control of Adaptation via Local Entropy), an entropy-guided adaptation-strength-control method that freezes the pretrained model and the SFT delta and learns bounded token- and module-specific gates by minimizing predictive entropy alone. These gates suppress, reverse, or extrapolate frozen SFT features according to their alignment with entropy reduction. Across Qwen2.5-Math-1.5B, Qwen2.5-Math-7B, and Qwen3-4B-Base, SCALE achieves mathematical-reasoning averages of 37.84, 43.60, and 36.57, exceeding the strongest corresponding baselines while remaining competitive on general-retention benchmarks. It also attains the best average code-generation performance across HumanEval, HumanEval+, and MBPP for all three models. These results suggest that effective SFT correction can benefit from controlling how already learned residuals are used, rather than only modifying how they are learned.

This paper presents a theoretical framework explaining why fine tuning small, randomly selected subnetworks (slices) within pre trained models can be sufficient for downstream adaptation. We prove that pretrained networks exhibit a universal winning slice property arising from two phenomena: (1) spectral balance the eigenspectra of different weight matrix slices are remarkably similar; and (2) high task energy their backbone representations retain rich, task relevant features. This leads to the Universal Winning Slice Hypothesis, which provides a theoretical foundation for parameter efficient fine tuning (PEFT) in large scale models. Inspired by this, we propose SliceFine, a PEFT method that exploits this inherent redundancy by updating only selected slices of the original weights introducing zero new parameters, unlike adapter-based approaches. Empirically, SliceFine matches the performance of state of the art PEFT methods across language and vision tasks, while significantly improving training speed, memory efficiency, and model compactness. Our work bridges theory and practice, offering a theoretically grounded alternative to existing PEFT techniques.

The visual models pretrained on large-scale benchmarks encode general knowledge and prove effective in building more powerful representations for downstream tasks. Most existing approaches follow the fine-tuning paradigm, either by initializing or regularizing the downstream model based on the pretrained one. The former fails to retain the knowledge in the successive fine-tuning phase, thereby prone to be over-fitting, and the latter imposes strong constraints to the weights or feature maps of the downstream model without considering semantic drift, often incurring insufficient optimization. To deal with these issues, we propose a novel fine-tuning framework, namely distribution regularization with semantic calibration (DR-Tune). It employs distribution regularization by enforcing the downstream task head to decrease its classification error on the pretrained feature distribution, which prevents it from over-fitting while enabling sufficient training of downstream encoders. Furthermore, to alleviate the interference by semantic drift, we develop the semantic calibration (SC) module to align the global shape and class centers of the pretrained and downstream feature distributions. Extensive experiments on widely used image classification datasets show that DR-Tune consistently improves the performance when combing with various backbones under different pretraining strategies. Code is available at: https://github.com/weeknan/DR-Tune.

In recent years, Parameter-Efficient Fine-Tuning (PEFT) methods like Low-Rank Adaptation (LoRA) have significantly enhanced the adaptability of large-scale pre-trained models. Weight-Decomposed Low-Rank Adaptation (DoRA) improves upon LoRA by separating the magnitude and direction components of the weight matrix, leading to superior performance. However, DoRA's improvements are limited to the vertical dimension, resulting in an asymmetrical pattern between horizontal and vertical dimensions. This paper introduces BoRA, an innovative extension of LoRA and DoRA, characterized by symmetrical properties across horizontal and vertical dimensions. Our approach optimizes the weight matrix symmetrically by adjusting both column-wise and row-wise magnitudes. Extensive experiments demonstrate that BoRA surpasses state-of-the-art PEFT methods, including LoRA and DoRA, achieving superior results across various benchmarks.

We propose 4Real-Video, a novel framework for generating 4D videos, organized as a grid of video frames with both time and viewpoint axes. In this grid, each row contains frames sharing the same timestep, while each column contains frames from the same viewpoint. We propose a novel two-stream architecture. One stream performs viewpoint updates on columns, and the other stream performs temporal updates on rows. After each diffusion transformer layer, a synchronization layer exchanges information between the two token streams. We propose two implementations of the synchronization layer, using either hard or soft synchronization. This feedforward architecture improves upon previous work in three ways: higher inference speed, enhanced visual quality (measured by FVD, CLIP, and VideoScore), and improved temporal and viewpoint consistency (measured by VideoScore and Dust3R-Confidence).

Diffusion and flow-matching models scale because pretraining is supervised regression: a clean sample is noised analytically, and a model regresses against a closed-form target. RL post-training aligns the model with a reward. In image generation, this makes samples compose objects correctly, render text legibly, and match human preferences. Existing methods rely on costly SDE rollouts, reward gradients, or surrogate losses, sacrificing pretraining's regression structure. We show that the structure extends to RL post-training. Under KL-regularized reward maximization, the optimal generative process tilts the clean-endpoint distribution towards samples with higher reward and leaves the noising law unchanged. Combining this with the adjoint-matching optimality condition and a REINFORCE identity, we derive Reinforce Adjoint Matching (RAM): a consistency loss that corrects the pretraining target with the reward. At each step, we draw a clean endpoint from the current model, evaluate its reward, noise it as in pretraining, and regress. No SDE rollouts, backward adjoint sweeps, or reward gradients are required. Like the pretraining objective, RAM is simple and scales. On Stable Diffusion 3.5M, RAM achieves the highest reward on composability, text rendering, and human preference, reaching Flow-GRPO's peak reward in up to 50times fewer training steps.

DiffusionNFT (NFT) fine-tunes diffusion models toward task-specific rewards, but optimizing these rewards does not guarantee fidelity to the full prompt. Although classifier-free guidance (CFG) strengthens prompt alignment, NFT is formulated as a CFG-free method, and applying CFG to the fine-tuned velocity field can reduce the optimized reward. This motivates optimizing rewards over the guided output distribution while seeking to retain its prompt alignment. However, applying standard NFT directly to guided samples can cause reward degradation or training collapse. We trace this failure to a mismatch between the reference velocity used in the NFT loss and the score of the guided sample distribution, which biases the improvement direction. We propose GuidanceNFT, which estimates the matching reference velocity through online flow matching on guided samples and uses it to correct both regression terms. With an exact reference, the corrected objective recovers NFT's intended update. In our experiments, the learned correction sustains reward improvement under both explicit and built-in guidance. On SD3.5-M, GuidanceNFT achieves higher optimized rewards than NFT with and without CFG across GenEval, text-rendering, and multi-reward objectives, together with better overall prompt alignment as measured by off-domain evaluation metrics. Experiments on models with built-in guidance, including Model Guidance and ELF, further demonstrate improved ImageNet generation, a better perplexity-entropy tradeoff on OpenWebText, and higher accuracy on GSM8K.

In this article, we introduce a novel normalization technique for neural network weight matrices, which we term weight conditioning. This approach aims to narrow the gap between the smallest and largest singular values of the weight matrices, resulting in better-conditioned matrices. The inspiration for this technique partially derives from numerical linear algebra, where well-conditioned matrices are known to facilitate stronger convergence results for iterative solvers. We provide a theoretical foundation demonstrating that our normalization technique smoothens the loss landscape, thereby enhancing convergence of stochastic gradient descent algorithms. Empirically, we validate our normalization across various neural network architectures, including Convolutional Neural Networks (CNNs), Vision Transformers (ViT), Neural Radiance Fields (NeRF), and 3D shape modeling. Our findings indicate that our normalization method is not only competitive but also outperforms existing weight normalization techniques from the literature.

Multilayer-perceptrons (MLP) are known to struggle with learning functions of high-frequencies, and in particular cases with wide frequency bands. We present a spatially adaptive progressive encoding (SAPE) scheme for input signals of MLP networks, which enables them to better fit a wide range of frequencies without sacrificing training stability or requiring any domain specific preprocessing. SAPE gradually unmasks signal components with increasing frequencies as a function of time and space. The progressive exposure of frequencies is monitored by a feedback loop throughout the neural optimization process, allowing changes to propagate at different rates among local spatial portions of the signal space. We demonstrate the advantage of SAPE on a variety of domains and applications, including regression of low dimensional signals and images, representation learning of occupancy networks, and a geometric task of mesh transfer between 3D shapes.

The two-stage fine-tuning (FT) method, linear probing (LP) then fine-tuning (LP-FT), outperforms linear probing and FT alone. This holds true for both in-distribution (ID) and out-of-distribution (OOD) data. One key reason for its success is the preservation of pre-trained features, achieved by obtaining a near-optimal linear head during LP. However, despite the widespread use of large language models, there has been limited exploration of more complex architectures such as Transformers. In this paper, we analyze the training dynamics of LP-FT for classification tasks on the basis of the neural tangent kernel (NTK) theory. Our analysis decomposes the NTK matrix into two components. This decomposition highlights the importance of the linear head norm alongside the prediction accuracy at the start of the FT stage. We also observe a significant increase in the linear head norm during LP, which stems from training with the cross-entropy (CE) loss. This increase in the linear head norm effectively reduces changes in learned features. Furthermore, we find that this increased norm can adversely affect model calibration, which can be corrected using temperature scaling. Additionally, we extend our analysis with the NTK to the low-rank adaptation (LoRA) method and validate its effectiveness. Our experiments using a Transformer-based model on multiple natural language processing datasets confirm our theoretical analysis. Our study demonstrates the effectiveness of LP-FT for fine-tuning language models. Code is available at https://github.com/tom4649/lp-ft_ntk.

On-policy self-distillation fine-tuning (SDFT) learns new skills from demonstrations while reducing forgetting, but it always distils toward the full demonstration-conditioned teacher. This fixes teacher influence at the full-teacher endpoint, providing no control over how much demonstration information should be transferred at each prediction state. We introduce Information-Proximal SDFT (iSDFT), which instead treats the teacher as a budgeted source of information. At each token, iSDFT selects the distribution closest to the current student that satisfies a prescribed teacher-information constraint, yielding a closed-form exponential target with a locally determined tilt. To control cumulative drift, we further anchor the student to its frozen base policy. Across four heterogeneous LLM backbones and two specialisation tasks, iSDFT improves vanilla SDFT in 7 of 8 model-task settings and matches it in the remaining one. It also provides tighter retention on the original SDFT benchmark suite, with 73% of evaluations remaining within 0.5 points of the base model versus 52% for the strongest baseline, while achieving the largest mean improvement on all ten additional mathematics, coding, and competition-mathematics benchmarks. These results show that controlling how much and when teacher information is introduced improves specialisation while preserving broader capability.

How to ensure fairness is an important topic in federated learning (FL). Recent studies have investigated how to reward clients based on their contribution (collaboration fairness), and how to achieve uniformity of performance across clients (performance fairness). Despite achieving progress on either one, we argue that it is critical to consider them together, in order to engage and motivate more diverse clients joining FL to derive a high-quality global model. In this work, we propose a novel method to optimize both types of fairness simultaneously. Specifically, we propose to estimate client contribution in gradient and data space. In gradient space, we monitor the gradient direction differences of each client with respect to others. And in data space, we measure the prediction error on client data using an auxiliary model. Based on this contribution estimation, we propose a FL method, federated training via contribution estimation (FedCE), i.e., using estimation as global model aggregation weights. We have theoretically analyzed our method and empirically evaluated it on two real-world medical datasets. The effectiveness of our approach has been validated with significant performance improvements, better collaboration fairness, better performance fairness, and comprehensive analytical studies.

Reward-based fine-tuning of diffusion models has largely inherited likelihood-based policy optimization developed for autoregressive large language models (LLMs). Diffusion models, however, are natively trained through velocity regression and do not directly provide the likelihood of a generated sample. Existing methods address this using transition likelihoods along stochastic denoising trajectories or evidence lower bounds (ELBOs) to approximate generated-sample likelihoods. These approximations arise from applying likelihood-based updates to models whose native training and generation operate through velocity fields. We instead take velocity matching as the starting point for reward fine-tuning. We propose reward-based velocity matching (RVM), which weights the velocity-matching loss by reward with an additional anchor regression term, requiring neither likelihood estimation nor likelihood ratios. RVM recovers Reinforce Adjoint Matching at the update level and contains DiffusionNFT as a special case, while ELBO-based methods are closely related through the same velocity-regression structure. This unified view isolates reward design and anchor velocity as principal design choices in velocity-based fine-tuning. Across text-to-image, text-to-video, and image-to-video generation, RVM matches or outperforms the evaluated trajectory-based methods. On Wan2.1-T2V-1.3B, it achieves the highest VBench Overall among the evaluated methods, with substantially lower estimated training costs than the trajectory-based approaches. For video fine-tuning, we introduce a dynamic-tracking reward that provides explicit motion feedback and improves both Dynamic Degree and overall VBench performance.

Rejection Fine-Tuning (RFT) is a standard method for training LLM agents, where unsuccessful trajectories are discarded from the training set. In the context of SWE-bench tasks, this corresponds to filtering out runs where the submitted patch does not pass the tests. However, this approach discards unresolved trajectories, even though they form a large portion of all trajectories for hard tasks and even then may be partially correct. In this work, we propose Step Rejection Fine-Tuning (SRFT) - a practical way to leverage these unresolved trajectories. For this, we employ a critic LLM to assess the correctness of each step in a trajectory. Consequently, during training, we mask the loss for erroneous steps while retaining them in the context window. This way we ensure the model learns to recover from errors without reproducing them. Evaluation on SWE-bench Verified shows that while RFT improves the resolution rate by 2.4% by excluding unresolved trajectories, SRFT improves it by 3.7% by filtering them instead of discarding completely, reaching the total resolution rate of 32.2%.

We study causal logistic bandits with counterfactual fairness constraints. The causal structure is given through known factual and counterfactual feature maps that share an unknown logistic reward parameter, but the learner observes only factual rewards. Consequently, the directions determining counterfactual feasibility need not be identifiable from the available feedback. The closest prior analyses either omit a coverage condition or impose a comparatively strong one, and do not establish matching lower bounds. We first show that some coverage condition is necessary: without a coverage-type restriction, factually indistinguishable environments with different optimal fair actions force Ω(T) expected joint loss. Under a weaker full-rank condition on the factual covariance pooled across actions, we identify a target-specific information scale V_star that measures the difficulty of estimating rewards and counterfactual effects from factual feedback. We construct worst-case families satisfying this condition on which every policy incurs expected joint loss Ωleft(left[V_starmin{log K,d}right]^{1/3}T^{2/3}right). We also give an explore--then--exploit procedure tuned using V_star and an adaptive algorithm that does not require its value. Both algorithms achieve max{R_T,V_T}=Oleft(left[V_starmin{log K,d}right]^{1/3}T^{2/3}+κd/σ_0^2right), where R_T is regret relative to the best fair action and V_T denotes the cumulative stage-wise positive violations. Thus the upper and lower bounds match in their leading dependence on T, V_star, and min{log K,d}, up to logarithmic factors.

Hardware-aware training (HAT) is widely used to improve the robustness of neural networks on non-ideal AI accelerators, such as analog in-memory computing (IMC) systems. However, not all hardware-induced distortions are equally compensable by training. This paper presents a diagnostic framework that models hardware non-idealities as structured perturbations of the forward operator and evaluates their compatibility with gradient-based optimization. We analyze six representative perturbation classes--read noise, variability, drift, stuck-at faults, IR-drop, and ADC discretization--and identify three key diagnostics: gradient expectation consistency, bounded gradient variance, and non-degenerate sensitivity. Our results show a clear separation between perturbations that can be compensated by HAT and those that consistently break optimization. This provides practical guidance for hardware-software co-design, clarifying which non-idealities can be addressed at the training level and which require circuit-, architecture-, or calibration-level mitigation. This study should be interpreted as a controlled empirical analysis under vanilla forward-perturbation HAT, rather than as a universal theory of hardware-aware training.

Existing feed-forward 3D Gaussian Splatting methods predict pixel-aligned primitives, leading to a quadratic growth in primitive count as resolution increases. This fundamentally limits their scalability, making high-resolution synthesis such as 4K intractable. We introduce LGTM (Less Gaussians, Texture More), a feed-forward framework that overcomes this resolution scaling barrier. By predicting compact Gaussian primitives coupled with per-primitive textures, LGTM decouples geometric complexity from rendering resolution. This approach enables high-fidelity 4K novel view synthesis without per-scene optimization, a capability previously out of reach for feed-forward methods, all while using significantly fewer Gaussian primitives. Project page: https://yxlao.github.io/lgtm/

Synthetic post-training pipelines commonly filter generated samples with reward models or holistic LLM judges, yet two practices remain rarely examined together: whether the filtering signal is grounded in the source evidence that induced each generation, and whether rejected samples can be systematically recovered rather than permanently discarded. We present a controlled study of both questions across gate configurations, recovery strategies, and generator scales, using adversarially injected corpora to provide ground-truth failure labels. We find that exact source provenance improves faithfulness gating for stronger judges, that hallucination and reward gates reject largely disjoint sample populations making both necessary, and that an adaptive recovery pipeline combining failure diagnosis with targeted regeneration achieves higher yield, recovery rate, and injection recall than naive resampling. Downstream fine-tuning quality is driven primarily by generator scale, with filtration and recovery conditions contributing meaningfully but secondarily.

In the artificial neuron, I replace the dot product with the weighted Lehmer mean, which may emulate different cases of a generalized mean. The single neuron instance is replaced by a multiplet of neurons which have the same averaging weights. A group of outputs feed forward, in lieu of the single scalar. The generalization parameter is typically set to a different value for each neuron in the multiplet. I further extend the concept to a multiplet taken from the Gini mean. Derivatives with respect to the weight parameters and with respect to the two generalization parameters are given. Some properties of the network are investigated, showing the capacity to emulate the classical exclusive-or problem organically in two layers and perform some multiplication and division. The network can instantiate truncated power series and variants, which can be used to approximate different functions, provided that parameters are constrained. Moreover, a mean case slope score is derived that can facilitate a learning-rate novelty based on homogeneity of the selected elements. The multiplet neuron equation provides a way to segment regularization timeframes and approaches.

Solving Bayesian inverse problems efficiently remains a significant challenge due to the complexity of posterior distributions and the computational cost of traditional sampling methods. Given a series of observations and the forward model, we want to recover the distribution of the parameters, conditioned on observed experimental data. We show, that combining Conditional Flow Mathching (CFM) with transformer-based architecture, we can efficiently sample from such kind of distribution, conditioned on variable number of observations.

How do we transfer the relevant knowledge from ever larger foundation models into small, task-specific downstream models that can run at much lower costs? Standard transfer learning using pre-trained weights as the initialization transfers limited information and commits us to often massive pre-trained architectures. This procedure also precludes combining multiple pre-trained models that learn complementary information. To address these shortcomings, we introduce Adaptive Feature Transfer (AFT). Instead of transferring weights, AFT operates purely on features, thereby decoupling the choice of the pre-trained model from the smaller downstream model. Rather than indiscriminately compressing all pre-trained features, AFT adaptively transfers pre-trained features that are most useful for performing the downstream task, using a simple regularization that adds minimal overhead. Across multiple vision, language, and multi-modal datasets, AFT achieves significantly better downstream performance compared to alternatives with a similar computational cost. Furthermore, AFT reliably translates improvement in pre-trained models into improvement in downstream performance, even if the downstream model is over 50times smaller, and can effectively transfer complementary information learned by multiple pre-trained models.

Inverse rendering remains a core challenge in graphics and vision, especially in the snapshot configurations required for lightweight desktop workflows, where the per-frame information budget is highly constrained. Previous inverse rendering work explores various available dimensions for enriching the per-shot information, including temporal modulation, spectral encoding, and polarization. In this work, we introduce polarimetric display inverse rendering, using an LCD to project a linearly polarized RGB binary pattern and an RGB polarization camera augmented with a quarter-wave plate to acquire spectro-polarimetric measurements in a single shot. A feed-forward transformer maps these measurements to per-pixel normal, albedo, roughness, and metallicity. To overcome training data scarcity, we expand a limited set of measured polarimetric bidirectional reflectance distribution functions via a generative manifold. Evaluations on a real desktop setup demonstrate accurate inverse rendering across diverse scenes, outperforming existing approaches.

Autoregressive perception models trained to localize visual entities under the open-vocabulary setting are mostly trained using Supervised fine-tuning (SFT) with maximum likelihood, yet it optimizes a proxy objective (per-token cross-entropy) that is fundamentally misaligned with perception metrics such as precision and recall. In this paper, we explore post-training reinforcement learning (RL), specifically GRPO, to directly align these models with their evaluation metrics. Building up on the recently introduced Falcon Perception, we design an RL framework that addresses perception-specific challenges: reward design for set-structured outputs and multi-head sampling control. We discover multiple benefits from RL for perception: first, RL unlocks state-of-the-art performance in very dense scenes (up to 500 objects per scene), a regime where most existing systems degrade sharply or collapse; furthermore it fixes common issues in autoregressive perception models like mask repetitions and removes almost entirely the need for NMS and coordinate deduplication, which improve both performance and efficiency and remove the need for hyperparameters tuning; overall, we notice improvements on all levels of difficulties in referring expression segmentation (on PBench and SACO-Gold), and we find an elegant way to preserve the knowledge of whether an object exists or not (as evaluated by MCC) without training on negative samples. We show that a simple reward that penalizes false negatives and positives is sufficient. We develop two hybrid self-annotation pipelines, respectively tailored for difficult referring expressions and very dense scenes, and show their benefits on RL-training. Model weights are released as a Falcon Perception revision~https://huggingface.co/tiiuae/Falcon-Perception. Datasets will be published.

Image-based reinforcement learning (RL) faces significant challenges in generalization when the visual environment undergoes substantial changes between training and deployment. Under such circumstances, learned policies may not perform well leading to degraded results. Previous approaches to this problem have largely focused on broadening the training observation distribution, employing techniques like data augmentation and domain randomization. However, given the sequential nature of the RL decision-making problem, it is often the case that residual errors are propagated by the learned policy model and accumulate throughout the trajectory, resulting in highly degraded performance. In this paper, we leverage the observation that predicted rewards under domain shift, even though imperfect, can still be a useful signal to guide fine-tuning. We exploit this property to fine-tune a policy using reward prediction in the target domain. We have found that, even under significant domain shift, the predicted reward can still provide meaningful signal and fine-tuning substantially improves the original policy. Our approach, termed Predicted Reward Fine-tuning (PRFT), improves performance across diverse tasks in both simulated benchmarks and real-world experiments. More information is available at project web page: https://sites.google.com/view/prft.

Feed-forward networks hold two thirds of a transformer's non-embedding parameters, yet the architecture has not received a necessity test that controls parameters, compute, and depth at once. We pretrain attention-only decoder transformers (Simple Attention Networks, SANs) against standard transformers matched separately for parameter count, training FLOPs, and depth (2 to 48 layers), for up to 105B tokens at 6M to 87M parameters. Deleting feed-forward layers in place is costly: the standard transformer leads by 0.47 nats at matched depth and 0.26 nats at matched FLOPs. Reallocating the freed budget into attention depth closes the gap: at matched parameters the difference is 0.006 nats (0.27 percent of loss), reproducible to one part in ten thousand across seed pairs, shrinking across 5B, 30B, and 105B budgets, and holding near 0.02 nats across a 29x size range. Three measurements localize the remaining gap to parametric recall: attention-only models are better on context-grounded answers and worse where knowledge must come from weights. Weight spectra show why: routing matrices (Q/K) crystallize early, content matrices accumulate rank slowly, and removing feed-forward layers relocates this accumulation to the attention output projection. QK-normalization, not feed-forward layers or residual gating, keeps 48-layer attention-only stacks trainable. The deficit concentrates on low-context query prediction and localizes there entirely by the largest budget. A pre-registered test confirms the account: it predicts a 0.02 to 0.05 nat gap on knowledge-dense web text; a matched pair trained on fineweb-edu measures 0.040. Within the tested regime, attention does the rest.

Radiance field methods have achieved photorealistic novel view synthesis and geometry reconstruction. But they are mostly applied in per-scene optimization or small-baseline settings. While several recent works investigate feed-forward reconstruction with large baselines by utilizing transformers, they all operate with a standard global attention mechanism and hence ignore the local nature of 3D reconstruction. We propose a method that unifies local and global reasoning in transformer layers, resulting in improved quality and faster convergence. Our model represents scenes as Gaussian Volumes and combines this with an image encoder and Group Attention Layers for efficient feed-forward reconstruction. Experimental results demonstrate that our model, trained for two days on four GPUs, demonstrates high fidelity in reconstructing 360 deg radiance fields, and robustness to zero-shot and out-of-domain testing. Our project Page: https://apchenstu.github.io/LaRa/.

General continual learning (GCL) challenges intelligent systems to learn from single-pass, non-stationary data streams without clear task boundaries. While recent advances in continual parameter-efficient tuning (PET) of pretrained models show promise, they typically rely on multiple training epochs and explicit task cues, limiting their effectiveness in GCL scenarios. Moreover, existing methods often lack targeted design and fail to address two fundamental challenges in continual PET: how to allocate expert parameters to evolving data distributions, and how to improve their representational capacity under limited supervision. Inspired by the fruit fly's hierarchical memory system characterized by sparse expansion and modular ensembles, we propose FlyPrompt, a brain-inspired framework that decomposes GCL into two subproblems: expert routing and expert competence improvement. FlyPrompt introduces a randomly expanded analytic router for instance-level expert activation and a temporal ensemble of output heads to dynamically adapt decision boundaries over time. Extensive theoretical and empirical evaluations demonstrate FlyPrompt's superior performance, achieving up to 11.23%, 12.43%, and 7.62% gains over state-of-the-art baselines on CIFAR-100, ImageNet-R, and CUB-200, respectively. Our source code is available at https://github.com/AnAppleCore/FlyGCL.

MeanFlow (MF) has recently been established as a framework for one-step generative modeling. However, its ``fastforward'' nature introduces key challenges in both the training objective and the guidance mechanism. First, the original MF's training target depends not only on the underlying ground-truth fields but also on the network itself. To address this issue, we recast the objective as a loss on the instantaneous velocity v, re-parameterized by a network that predicts the average velocity u. Our reformulation yields a more standard regression problem and improves the training stability. Second, the original MF fixes the classifier-free guidance scale during training, which sacrifices flexibility. We tackle this issue by formulating guidance as explicit conditioning variables, thereby retaining flexibility at test time. The diverse conditions are processed through in-context conditioning, which reduces model size and benefits performance. Overall, our improved MeanFlow (iMF) method, trained entirely from scratch, achieves 1.72 FID with a single function evaluation (1-NFE) on ImageNet 256times256. iMF substantially outperforms prior methods of this kind and closes the gap with multi-step methods while using no distillation. We hope our work will further advance fastforward generative modeling as a stand-alone paradigm.

We propose a method for adapting neural networks to distribution shifts at test-time. In contrast to training-time robustness mechanisms that attempt to anticipate and counter the shift, we create a closed-loop system and make use of a test-time feedback signal to adapt a network on the fly. We show that this loop can be effectively implemented using a learning-based function, which realizes an amortized optimizer for the network. This leads to an adaptation method, named Rapid Network Adaptation (RNA), that is notably more flexible and orders of magnitude faster than the baselines. Through a broad set of experiments using various adaptation signals and target tasks, we study the efficiency and flexibility of this method. We perform the evaluations using various datasets (Taskonomy, Replica, ScanNet, Hypersim, COCO, ImageNet), tasks (depth, optical flow, semantic segmentation, classification), and distribution shifts (Cross-datasets, 2D and 3D Common Corruptions) with promising results. We end with a discussion on general formulations for handling distribution shifts and our observations from comparing with similar approaches from other domains.

Gatys et al. recently introduced a neural algorithm that renders a content image in the style of another image, achieving so-called style transfer. However, their framework requires a slow iterative optimization process, which limits its practical application. Fast approximations with feed-forward neural networks have been proposed to speed up neural style transfer. Unfortunately, the speed improvement comes at a cost: the network is usually tied to a fixed set of styles and cannot adapt to arbitrary new styles. In this paper, we present a simple yet effective approach that for the first time enables arbitrary style transfer in real-time. At the heart of our method is a novel adaptive instance normalization (AdaIN) layer that aligns the mean and variance of the content features with those of the style features. Our method achieves speed comparable to the fastest existing approach, without the restriction to a pre-defined set of styles. In addition, our approach allows flexible user controls such as content-style trade-off, style interpolation, color & spatial controls, all using a single feed-forward neural network.

The efficient spatial allocation of primitives serves as the foundation of 3D Gaussian Splatting, as it directly dictates the synergy between representation compactness, reconstruction speed, and rendering fidelity. Previous solutions, whether based on iterative optimization or feed-forward inference, suffer from significant trade-offs between these goals, mainly due to the reliance on local, heuristic-driven allocation strategies that lack global scene awareness. Specifically, current feed-forward methods are largely pixel-aligned or voxel-aligned. By unprojecting pixels into dense, view-aligned primitives, they bake redundancy into the 3D asset. As more input views are added, the representation size increases and global consistency becomes fragile. To this end, we introduce GlobalSplat, a framework built on the principle of align first, decode later. Our approach learns a compact, global, latent scene representation that encodes multi-view input and resolves cross-view correspondences before decoding any explicit 3D geometry. Crucially, this formulation enables compact, globally consistent reconstructions without relying on pretrained pixel-prediction backbones or reusing latent features from dense baselines. Utilizing a coarse-to-fine training curriculum that gradually increases decoded capacity, GlobalSplat natively prevents representation bloat. On RealEstate10K and ACID, our model achieves competitive novel-view synthesis performance while utilizing as few as 16K Gaussians, significantly less than required by dense pipelines, obtaining a light 4MB footprint. Further, GlobalSplat enables significantly faster inference than the baselines, operating under 78 milliseconds in a single forward pass. Project page is available at https://r-itk.github.io/globalsplat/

Streaming autoregressive diffusion models enable real-time, long-horizon video generation, but their training objectives optimize local frame prediction rather than the geometry and dynamics of a coherent world: long rollouts accumulate geometric drift and degrade into static or unnatural motion. Recent bidirectional approaches address this problem using rewards signals built upon 3D Gaussian-Splatting reconstruction. However, a single rigid 3d reconstruction cannot model a dynamic scene, so this critic penalizes genuine object motion as reconstruction error and is maximized by freezing the video. This shortcut is especially detrimental in the AR setting, where each chunk can propagate an already-static configuration. In this work, we propose Stream4D, which replaces the static critic with a feed-forward 4D reconstruction reward that explicitly models scene dynamics, allowing coherent motion to receive high consistency rewards. To further guide motion magnitude and quality, we add a motion prior that rewards natural scene-flow magnitude while penalizing jitter and non-rigid artifacts. Our final recipe combines these two terms with a lightweight perceptual anchor. Across various autoregressive video backbones and various generation horizons, Stream4D improves 4D reconstruction quality, preserves motion more effectively, and achieves higher human-aligned preference. Project page: https://banyuanhao.github.io/Stream4D/

Multimodal large language models (MLLMs) struggle with numerical regression under long-tailed target distributions. Token-level supervised fine-tuning (SFT) and point-wise regression rewards bias learning toward high-density regions, leading to regression-to-the-mean behavior and poor tail performance. We identify the lack of cross-sample relational supervision as a key limitation of existing MLLM training paradigms. To address it, we propose a distribution-aware reinforcement learning framework based on Group Relative Policy Optimization, which introduces batch-level comparison-based supervision via the Concordance Correlation Coefficient-based reward to align predicted and ground-truth distributions in terms of correlation, scale, and mean. The framework is plug-and-play, requiring no architectural modification. Experiments on a unified suite of long-tailed regression benchmarks show consistent improvements over SFT and existing MLLM regression methods, with particularly strong gains in medium- and few-shot regimes.

Deep neural networks are known to exhibit a spectral learning bias, wherein low-frequency components are learned early in training, while high-frequency modes emerge more gradually in later epochs. However, when the target signal lacks low-frequency components and is dominated by broadband high frequencies, training suffers from a 'spectral bottleneck', and the model fails to reconstruct the entire signal, including the frequency components that lie within the network's representational capacity. We examine such a scenario in the context of implicit neural representations (INRs) with sinusoidal representation networks (SIRENs), focusing on the challenge of fitting high-frequency-dominant signals that are susceptible to spectral bottleneck. To effectively fit any target signal irrespective of it's frequency content, we propose a generalized target-aware 'weight perturbation scheme' (WINNER - weight initialization with noise for neural representations) for network initialization. The scheme perturbs uniformly initialized weights with Gaussian noise, where the noise scales are adaptively determined by the spectral centroid of the target signal. We show that the noise scales can provide control over the spectra of network activations and the eigenbasis of the empirical neural tangent kernel. This method not only addresses the spectral bottleneck but also yields faster convergence and with improved representation accuracy, outperforming state-of-the-art approaches in audio fitting and achieving notable gains in image fitting and denoising tasks. Beyond signal reconstruction, our approach opens new directions for adaptive weight initialization strategies in computer vision and scientific machine learning.

Large Language Models (LLMs) are typically fine-tuned for reasoning tasks through a two-stage pipeline of Supervised Fine-Tuning (SFT) followed by Reinforcement Learning (RL), a process fraught with catastrophic forgetting and suboptimal trade-offs between imitation and exploration. Recent single-stage methods attempt to unify SFT and RL using heuristics, but lack a principled mechanism for dynamically balancing the two paradigms. In this paper, we reframe this challenge through the theoretical lens of implicit rewards, viewing SFT and RL not as distinct methods but as complementary reward signals. We introduce Adaptive Meta Fine-Tuning (AMFT), a novel single-stage algorithm that learns the optimal balance between SFT's implicit, path-level reward and RL's explicit, outcome-based reward. The core of AMFT is a meta-gradient adaptive weight controller that treats the SFT-RL balance as a learnable parameter, dynamically optimizing it to maximize long-term task performance. This forward-looking approach, regularized by policy entropy for stability, autonomously discovers an effective training curriculum. We conduct a comprehensive evaluation on challenging benchmarks spanning mathematical reasoning, abstract visual reasoning (General Points), and vision-language navigation (V-IRL). AMFT consistently establishes a new state-of-the-art and demonstrats superior generalization on out-of-distribution (OOD) tasks. Ablation studies and training dynamic analysis confirm that the meta-learning controller is crucial for AMFT's stability, sample efficiency, and performance, offering a more principled and effective paradigm for LLM alignment.Our codes are open-sourced via https://github.com/hlxtsyj/AMFT.

Low-rank adaptation (LoRA) is a widely used parameter-efficient fine-tuning method that places trainable low-rank adapters into frozen pre-trained models. Recent studies show that using fewer LoRA adapters may still maintain or even improve performance, but existing methods still distribute adapters broadly, leaving where to place a limited number of adapters to maximize performance largely open. To investigate this, we introduce PAGE (Projected Adapter Gradient Energy), a gradient-based sensitivity probe that estimates the initial trainable gradient energy available to each candidate LoRA adapter. Surprisingly, we find that PAGE is highly concentrated on a single shallow FFN down-projection across two model families and four downstream tasks. We term this module the dominant adaptation module and show that its layer index is architecture-dependent but task-stable. Motivated by this finding, we propose DomLoRA, a placement method that places a single adapter at the dominant adaptation module. With only 0.7\% of vanilla LoRA's trainable parameters, DomLoRA outperforms it on average across downstream tasks, including instruction following, mathematical reasoning, coding, and multi-turn conversation. This method also matches or improves other LoRA variants and reduces training time by up to 2.74times compared with broad placement, supporting the dominant adaptation module perspective as a practical placement guideline.

Regression-based RL for flow models mandates sampling without classifier-free guidance (CFG) to align the rectification target with the reference marginal velocity. Extending Advantage-Weighted Rectification (AWR), which dynamically scales this regression target based on reward, to video generation encounters a cold-start pathology: unguided rollouts collapse into low-fidelity regions where intra-group reward gaps remain wide but no longer track perceptual quality, rendering the optimization target arbitrary. Conversely, utilizing guided rollouts to restore fidelity, while keeping the regression target tied to the guided sampling distribution, provably triggers a geometric guidance blow-up under exponential-moving-average (EMA) updates. We propose VideoAWR, which resolves this tension by untying sampling from the optimization anchor. An EMA reference policy generates guided rollouts to restore reward separability, while the trainable policy is rectified against the unguided conditional anchor. We prove this decoupled objective is mathematically exact: the centered advantage cancels the anchor in expectation, filtering out the reward-neutral guidance offset and retaining only the reward-correlated covariance increment. Consequently, inference runs single-branch and CFG-free, yet inference-time CFG preserves its original semantics. Furthermore, we introduce Decoupled Timestep Rectification, supervising each rollout at an independently sampled timestep without bias to improve sample efficiency. Experiments on Wan2.1-1.3B and 14B demonstrate stable optimization and superior visual and motion quality in both CFG-free and CFG-enabled regimes. Code is available at \pdfstartlink attr{/Border [0 0 0]} user{/Subtype /Link /A << /S /URI /URI (https://github.com/Fuzm7/FlowAWR) >>}% pearDark{VideoAWR}\pdfendlink.

When a large feedforward neural network is trained on a small training set, it typically performs poorly on held-out test data. This "overfitting" is greatly reduced by randomly omitting half of the feature detectors on each training case. This prevents complex co-adaptations in which a feature detector is only helpful in the context of several other specific feature detectors. Instead, each neuron learns to detect a feature that is generally helpful for producing the correct answer given the combinatorially large variety of internal contexts in which it must operate. Random "dropout" gives big improvements on many benchmark tasks and sets new records for speech and object recognition.

Neural Radiance Fields (NeRF) face significant challenges in few-shot scenarios, primarily due to overfitting and long training times for high-fidelity rendering. Existing methods, such as FreeNeRF and SparseNeRF, use frequency regularization or pre-trained priors but struggle with complex scheduling and bias. We introduce FrugalNeRF, a novel few-shot NeRF framework that leverages weight-sharing voxels across multiple scales to efficiently represent scene details. Our key contribution is a cross-scale geometric adaptation scheme that selects pseudo ground truth depth based on reprojection errors across scales. This guides training without relying on externally learned priors, enabling full utilization of the training data. It can also integrate pre-trained priors, enhancing quality without slowing convergence. Experiments on LLFF, DTU, and RealEstate-10K show that FrugalNeRF outperforms other few-shot NeRF methods while significantly reducing training time, making it a practical solution for efficient and accurate 3D scene reconstruction.

In recent years, multiple notions of algorithmic fairness have arisen. One such notion is individual fairness (IF), which requires that individuals who are similar receive similar treatment. In parallel, matrix estimation (ME) has emerged as a natural paradigm for handling noisy data with missing values. In this work, we connect the two concepts. We show that pre-processing data using ME can improve an algorithm's IF without sacrificing performance. Specifically, we show that using a popular ME method known as singular value thresholding (SVT) to pre-process the data provides a strong IF guarantee under appropriate conditions. We then show that, under analogous conditions, SVT pre-processing also yields estimates that are consistent and approximately minimax optimal. As such, the ME pre-processing step does not, under the stated conditions, increase the prediction error of the base algorithm, i.e., does not impose a fairness-performance trade-off. We verify these results on synthetic and real data.

Learned image compression (LIC) has gained traction as an effective solution for image storage and transmission in recent years. However, existing LIC methods are redundant in latent representation due to limitations in capturing anisotropic frequency components and preserving directional details. To overcome these challenges, we propose a novel frequency-aware transformer (FAT) block that for the first time achieves multiscale directional ananlysis for LIC. The FAT block comprises frequency-decomposition window attention (FDWA) modules to capture multiscale and directional frequency components of natural images. Additionally, we introduce frequency-modulation feed-forward network (FMFFN) to adaptively modulate different frequency components, improving rate-distortion performance. Furthermore, we present a transformer-based channel-wise autoregressive (T-CA) model that effectively exploits channel dependencies. Experiments show that our method achieves state-of-the-art rate-distortion performance compared to existing LIC methods, and evidently outperforms latest standardized codec VTM-12.1 by 14.5%, 15.1%, 13.0% in BD-rate on the Kodak, Tecnick, and CLIC datasets.

Few-step autoregressive video diffusion generates a long video by splitting the video into temporal chunks and generating chunk-by-chunk, each through a short sequence of denoising stages. To memorize chunks that are already generated, previous methods reconstruct a clean or less-noisy key--value (KV) cache by additional forwards to build the cache without advancing an output latent. However, every denoising forward itself already computes the in-flight KV of the current chunk. We introduce FlashForward, which directly reuses this cache to avoid the heavy cache-update-only model forwards. After the current chunk completes one denoising stage, its stage-specific cache is already available for the next chunk. Assigning one GPU to each stage therefore lets different chunks occupy different stages concurrently. This early availability has a quality cost: the resulting stage-matched history is noisy, causing appearance and motion drift among chunks. To complement it, FlashForward produces sparse auxiliary clean anchor latents before the corresponding region is generated so the generation trajectories can be stabilized by this two-sided conditioning. The two memories operate at different temporal scales: sparse clean anchor KV supplies coarse, long-range two-sided structural guidance, while dense stage-matched history preserves fine, recent evolution. With up to four GPUs, FlashForward runs 1.16--1.69times faster than HiAR and 1.42--2.92times faster than Self-Forcing for 16 FPS videos of 20 seconds or longer across 1.3B and 14B backbone scales at 480p and 720p. On VBench, for the 1.3B model at 480p, it achieves higher scores and remains stable at longer durations, demonstrating that FlashForward generates high-quality and temporally consistent videos across durations of 20s, 35s and 65s at a much faster generation speed.

We perform an effective-theory analysis of forward-backward signal propagation in wide and deep Transformers, i.e., residual neural networks with multi-head self-attention blocks and multilayer perceptron blocks. This analysis suggests particular width scalings of initialization and training hyperparameters for these models. We then take up such suggestions, training Vision and Language Transformers in practical setups.

Thanks to the large pre-trained vision-language models (VLMs) like CLIP, we can craft a zero-shot classifier by "prompt", e.g., the confidence score of an image being "[CLASS]" can be obtained by using the VLM provided similarity measure between the image and the prompt sentence "a photo of a [CLASS]". Therefore, prompt shows a great potential for fast adaptation of VLMs to downstream tasks if we fine-tune the prompt-based similarity measure. However, we find a common failure that improper fine-tuning may not only undermine the prompt's inherent prediction for the task-related classes, but also for other classes in the VLM vocabulary. Existing methods still address this problem by using traditional anti-overfitting techniques such as early stopping and data augmentation, which lack a principled solution specific to prompt. We present Prompt-aligned Gradient, dubbed ProGrad, to prevent prompt tuning from forgetting the the general knowledge learned from VLMs. In particular, ProGrad only updates the prompt whose gradient is aligned (or non-conflicting) to the "general direction", which is represented as the gradient of the KL loss of the pre-defined prompt prediction. Extensive experiments demonstrate the stronger few-shot generalization ability of ProGrad over state-of-the-art prompt tuning methods. Codes are available at https://github.com/BeierZhu/Prompt-align.

The fine-tuning of pre-trained models has become ubiquitous in generative AI, computer vision, and robotics. Although much attention has been paid to improving the efficiency of fine-tuning model, there has been less scholarship around fine-tuning specifically for improved model performance. To remedy this gap, we present PROFIT, one of the first optimizers designed to incrementally fine-tune converged models on new tasks and/or datasets. Unlike traditional optimizers such as SGD or Adam, which make minimal assumptions due to random initializations, PROFIT takes the properties of a converged model into account explicitly to regularize the optimization process. Employing a temporal gradient-orthogonalization process, PROFIT outperforms fine-tuning methods in various tasks, from image classification to multimodal language model training to large-scale motion prediction. Moreover, PROFIT is encapsulated as a modular optimizer, which makes it easy to integrate directly into any training pipeline with minimal engineering effort.

Real-time free-viewpoint rendering requires balancing multi-camera redundancy with the latency constraints of interactive applications. We address this challenge by combining lightweight geometry with learning and propose 3DTV, a feedforward network for real-time sparse-view interpolation. A Delaunay-based triplet selection ensures angular coverage for each target view. Building on this, we introduce a pose-aware depth module that estimates a coarse-to-fine depth pyramid, enabling efficient feature reprojection and occlusion-aware blending. Unlike methods that require scene-specific optimization, 3DTV runs feedforward without retraining, making it practical for AR/VR, telepresence, and interactive applications. Our experiments on challenging multi-view video datasets demonstrate that 3DTV consistently achieves a strong balance of quality and efficiency, outperforming recent real-time novel-view baselines. Crucially, 3DTV avoids explicit proxies, enabling robust rendering across diverse scenes. This makes it a practical solution for low-latency multi-view streaming and interactive rendering. Project Page: https://stefanmschulz.github.io/3DTV_webpage/