new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 19

Message Passing Enables Efficient Reasoning

While inference-time scaling has improved the reasoning abilities of large language models (LLMs), the need to generate long chains-of-thought (CoTs) is a computational bottleneck. Thus, in contrast to sequential scaling methods like CoT, recent parallel scaling techniques instead use fork and join (FJ) primitives to divide work across multiple LLM threads. However, in the fork-join paradigm, threads are typically transient and do not communicate pointwise with one another which limits scalability. To tackle this, we introduce Message Passing Language Models (MPLMs), a framework for LLM reasoning in which threads communicate directly via lightweight send and receive primitives. MPLMs enable efficient scaling through two key mechanisms: (1) reduced communication costs, achieved by avoiding redundant context sharing, and (2) preemption, which allows threads to terminate early based on partial information from their peers. We demonstrate the promise of MPLMs on 3 classes of tasks. First, on Sudoku puzzles, we show that MPLMs require an asymptotically smaller context than both serial CoT and parallel FJ. We then fine-tune a single model to solve 25 x 25 puzzles that remain challenging for standard CoT and FJ approaches, as well as frontier reasoning models without tools. Second, on 3-SAT puzzles, the capability of preemption allows termination of unpromising branches, which results in improved efficiency. Finally, we show that appropriately prompted large pre-trained models follow the MPLM protocol, achieving competitive results on long-context question answering relative to popular fork-join approaches.

  • 4 authors
·
Oct 4

Fork-Think with Confidence

Parallel thinking has enjoyed great success for boosting LLM performance on reasoning tasks without the need for any re-training. However, existing methods follow a think-first-then-decide paradigm, i.e., they first sample multiple reasoning paths, which inevitably leads to overgeneration, then prune or stop unnecessary paths to compensate. In contrast, decide-first-then-think, i.e., first identifying points that are likely to lead to desirable generations, has been underexplored so far. Following this paradigm, we propose Fork-think with confidence, that first identifies forking points using model confidence in a single seeding path, then triggers thinking, sampling multiple continuations and aggregating them for the final response. Our experiments across three models and three reasoning benchmarks show that Fork-think reduces the token consumption by up to 30% and run-time by up to 57%, while performing comparable to or better than parallel thinking. Our analysis reveals that Fork-think is able to identify forking points that are meaningful with respect to the downstream task and that sampling at later positions can lead to substantially better generations. Finally, we demonstrate how combining Fork-think with existing mechanisms such as early stopping and weighted voting can further boost the performance and perform comparably to existing state-of-the-art methods, without requiring any warm-up or offline training. Our results establish pre-determined forking as a promising research direction for efficient LLM reasoning.

  • 4 authors
·
Jun 29

Claim Plane: Enforceable Change Intents and Dynamic Scope for Parallel Coding Agents

Parallel coding agents can independently produce locally valid changes while still interfering at integration time, expanding beyond planned scope, or relying on premises invalidated by concurrent work. Existing responses emphasize communication, isolated workspaces, late merge-time repair, continuous supervision, or post-hoc runtime recovery. This paper presents Claim Plane, a model-agnostic coordination architecture that treats concurrent software change as a pre-write admission problem. Before implementation, each worker declares a versioned ChangeIntent containing an exact base commit, typed resources, dependencies, and operations marked as committed or contingent. A deterministic control plane atomically admits compatible intents, constrains same-file parallelism to declared regions, serializes unresolved overlap, tracks dependency invalidation, and fails closed on ambiguous authority. During execution, a contingent mutation does not reserve write ownership initially; the first attempted mutation triggers atomic scope promotion and re-admission against the current active set. Brokered execution binds capabilities to intent versions, leases, OS-level worktree locks, monotonic fencing tokens, and Git-tree provenance, while integration verifies immutable patches and evidence. A preliminary six-pair CooperBench mechanism check is reported only as feasibility evidence: static Claim Plane achieved 6/6 pair passes with full serialization, while dynamic scope retained parallel admission on half of the pairs, performed seven successful scope promotions, and failed closed on two undeclared mutations. The sample is intentionally too small for comparative claims. We argue that separating probabilistic planning from deterministic authority provides a foundation for a future learned semantic-dependency model and frontier-model escalation only on unresolved cases.

  • 1 authors
·
Jul 23

Trajectory Soup: Pushing the Compute-Scaling Frontier of LLM Mid-training via Diverse Trajectories

Mid-training equips pretrained large language models with specialized and reasoning capabilities, but the returns of this stage are bounded since additional serial compute yields little further downstream improvement and can even degrade some capabilities, which places a practical ceiling on how much compute mid-training absorbs. We revisit how this compute should be allocated to a single run or multiple similar optimizations. We find that branches forked from a shared checkpoint under various controlled recipe reaches measurably different regions of parameter space, and establish a form of compatible diversity that extending one run cannot supply. Therefore, we introduce Trajectory Soup, which distributes a mid-training budget over several independent branches, and consolidates strongest checkpoints selected on validation through intra- and inter-trajectory averaging into a single model. A local bias and variance analysis separates the two averaging levels, showing that inter-trajectory averaging removes residual error beyond the reach of averaging within a trajectory, while checkpoint selection carries a bias that bounds how many checkpoints are worth merging. Across model scales, learning-rate schedules, token budgets, and trajectory counts, Trajectory Soup improves aggregate downstream performance over the strongest single-trajectory average under matched budgets and keeps improving as budgets expand, with the advantage preserved after an identical post-training pipeline. These results position trajectory allocation and merging as a practical way to extend the compute-scaling frontier of mid-training beyond serial saturation.

  • 8 authors
·
Sep 29

Forklift: An Extensible Neural Lifter

The escalating demand to migrate legacy software across different Instruction Set Architectures (ISAs) has driven the development of assembly-to-assembly translators to map between their respective assembly languages. However, the development of these tools requires substantial engineering effort. State-of-the-art approaches use lifting, a technique where source assembly code is translated to an architecture-independent intermediate representation (IR) (for example, the LLVM IR) and use a pre-existing compiler to recompile the IR to the target ISA. However, the hand-written rules these lifters employ are sensitive to the particular compiler and optimization level used to generate the code and require significant engineering effort to support each new ISA. We propose Forklift, the first neural lifter that learns how to translate assembly to LLVM IR using a token-level encoder-decoder Transformer. We show how to incrementally add support to new ISAs by fine tuning the assembly encoder and freezing the IR decoder, improving the overall accuracy and efficiency. We collect millions of parallel LLVM IR, x86, ARM, and RISC-V programs across compilers and optimization levels to train Forklift and set up an input/output-based accuracy harness. We evaluate Forklift on two challenging benchmark suites and translate 2.5x more x86 programs than a state-of-the-art hand-written lifter and 4.4x more x86 programs than GPT-4 as well as enabling translation from new ISAs.

  • 5 authors
·
Mar 31, 2024

TokenWeave: Efficient Compute-Communication Overlap for Distributed LLM Inference

Distributed inference of large language models (LLMs) can introduce overheads of up to 20% even over GPUs connected via high-speed interconnects such as NVLINK. Multiple techniques have been proposed to mitigate these overheads by decomposing computations into finer-grained tasks and overlapping communication with sub-tasks as they complete. However, fine-grained decomposition of a large computation into many smaller computations on GPUs results in overheads. Further, the communication itself uses many streaming multiprocessors (SMs), adding to the overhead. We present TokenWeave to address these challenges. TokenWeave proposes a Token-Splitting technique that divides the tokens in the inference batch into two approximately equal subsets in a wave-aware manner. The computation of one subset is then overlapped with the communication of the other. In addition, TokenWeave optimizes the order of the layer normalization computation with respect to communication operations and implements a novel fused AllReduce-RMSNorm kernel carefully leveraging Multimem instruction support available on NVIDIA Hopper GPUs. These optimizations allow TokenWeave to perform communication and RMSNorm using only 2-8 SMs. Moreover, our kernel enables the memory bound RMSNorm to be overlapped with the other batch's computation, providing additional gains. Our evaluations demonstrate up to 29% latency gains and up to 26% throughput gains across multiple models and workloads. In several settings, TokenWeave results in better performance compared to an equivalent model with all communication removed.

  • 3 authors
·
May 16, 2025

TokenRing: An Efficient Parallelism Framework for Infinite-Context LLMs via Bidirectional Communication

Efficient parallelization of Large Language Models (LLMs) with long sequences is essential but challenging due to their significant computational and memory demands, particularly stemming from communication bottlenecks in attention mechanisms. While sequence parallelism (SP) has been introduced as a potential solution, existing methods often suffer from limited scalability or inefficiency, rendering their effectiveness. Ring-Attention demonstrates the potential for scaling sequence processing but faces significant limitations due to its reliance on peer-to-peer (P2P) communication and inefficient utilization of network resources. As the degree of SP increases, the quadratic decrease in computation time per step contrasts sharply with the linear reduction in communication volume, exacerbating communication bottlenecks. To address these challenges, we propose TokenRing, a fine-grained parallel framework that leverages bidirectional P2P communication to effectively overlap computation and data transmission. By partitioning the attention block and concurrently transmitting Query and block outputs (i.e., block_out and block_lse) within a fully connected mesh topology, TokenRing achieves significant reductions in communication overhead and better load balancing. These innovations improve the scalability and efficiency of distributed Transformer models, particularly for long-context sequences. Experimental results demonstrate that TokenRing enhances throughput and reduces communication latency. Moreover, its design adapts seamlessly to various multi-GPU interconnect solutions, such as Huawei Ascend, ensuring broad compatibility and cost-effectiveness for distributed LLM inference and training. The code is available at: https://github.com/ACA-Lab-SJTU/token-ring.

  • 4 authors
·
Dec 29, 2024

Speculative Forking: Turning Idle Wait into Parallel Exploration for Repository Environment Setup

Before developers can use a software project, they must first get it to run. This often requires installing the right language runtime, system packages, build tools, and test commands. Recent LLM-based agents automate environment setup by inspecting a repository, writing setup scripts, running them, and repairing the resulting errors. However, these agents still follow a sequential trial-and-error loop: they try one setup route, wait for slow commands to finish, observe the failure, and only then decide what to try next. Because environment commands often take long to run, this sequential workflow makes setup slow and limits exploration to one route at a time. We present SpecBuild, an LLM-based environment setup system designed to be both faster and more successful through speculative forking. SpecBuild explores candidate setup branches in parallel, returns the first committed environment, and discards the rest. It applies this design at two granularities: strategy-level forking explores alternative setup routes, such as different base images and dependency policies, while command-level forking predicts failures of running commands and prepares repair branches before those failures are observed. We evaluate SpecBuild on Multi-Docker-Eval, covering 334 tasks from 40 repositories and 9 programming languages. Across three backbone models, SpecBuild improves the success rate by 6.4 to 12.0 percentage points over the strongest baseline, while reducing average setup time by 22.4% to 41.6%. These results show that LLM-based environment setup need not trade speed for reliability: parallel speculative exploration can make agents both faster and more successful.

  • 11 authors
·
Oct 22

SpecRouter: Adaptive Routing for Multi-Level Speculative Decoding in Large Language Models

Large Language Models (LLMs) present a critical trade-off between inference quality and computational cost: larger models offer superior capabilities but incur significant latency, while smaller models are faster but less powerful. Existing serving strategies often employ fixed model scales or static two-stage speculative decoding, failing to dynamically adapt to the varying complexities of user requests or fluctuations in system performance. This paper introduces , a novel framework that reimagines LLM inference as an adaptive routing problem solved through multi-level speculative decoding. dynamically constructs and optimizes inference "paths" (chains of models) based on real-time feedback, addressing the limitations of static approaches. Our contributions are threefold: (1) An adaptive model chain scheduling mechanism that leverages performance profiling (execution times) and predictive similarity metrics (derived from token distribution divergence) to continuously select the optimal sequence of draft and verifier models, minimizing predicted latency per generated token. (2) A multi-level collaborative verification framework where intermediate models within the selected chain can validate speculative tokens, reducing the verification burden on the final, most powerful target model. (3) A synchronized state management system providing efficient, consistent KV cache handling across heterogeneous models in the chain, including precise, low-overhead rollbacks tailored for asynchronous batch processing inherent in multi-level speculation. Preliminary experiments demonstrate the validity of our method.

  • 6 authors
·
May 11, 2025

Cascadia: A Control-Plane-Free Alternative to Hyperconverged AI Infrastructure

We present Cascadia, a system for serving large language models on fleets of commodity Intel AIPCs using their CPU, integrated-GPU, and NPU resources. Every node embeds ingress, scheduling, and execution; inference requests require no dedicated routing control plane. Nodes join a libp2p QUIC mesh using CA-issued ed25519 admission certificates, gossip signed capabilities, exchange live load over direct peer streams, and route OpenAI-compatible requests to eligible peers. An operator-run certificate authority handles admission and fleet management outside the inference path. Three serving modes share one interface: whole-model execution on one node, load-balanced replicas, and pipeline-sharded chains using the compilation and speculative decoding mechanism of our companion paper. Optional KV-cache mobility reuses compatible conversation prefixes after a routing move, with cold recomputation on a miss. Signed response receipts and hash-chained logs support provenance and audit. A three-node Phi-3.5-mini NPU testbed delivered 3.10x the response throughput of its one-node configuration under ten concurrent requests; a separate four-node deployment recorded 4.06x the throughput of direct single-node serving. Paired latency observations, runtime measurements, and internal functional checks characterize the tested configurations. We compare Cascadia with IBM, Nutanix, VMware, and HPE platforms on deployment footprint, hardware requirements, scheduling, scaling, licensing, and trust, using vendor documentation. The paper repository provides benchmark scripts, curated measurements, and a claim-to-evidence map.

  • 4 authors
·
Sep 29

ForkPilot: Self-Evolving Policy for Retrospective Search in Long-Horizon Agents

Interactive language-model agents increasingly solve complex tasks through long-horizon, multi-call reasoning, where errors in beliefs or actions can compound across tool interactions. Retrospective search can recover from such failures but is prone to misallocation. Delayed outcomes obscure the contribution of intermediate search decisions, leading to Attribution Complexity, while evolving execution evidence leads to Adaptation Complexity, where previously learned estimates become stale. To address these challenges, we first introduce Search Value Dynamics (SVD), which characterizes the evolving trade-off between the gain and cost of retrospective search. Building on SVD, we propose ForkPilot, a self-evolving two-stage policy-learning framework. In the first stage, ForkPilot learns a search-value policy offline from completed trajectories through automatically constructed outcome comparisons. In the second stage, it makes search decisions based on current observations and then self-evolves by incorporating newly completed trajectories into subsequent policy updates. We evaluate ForkPilot across 6 diverse benchmarks and 7 widely used LLM backbone families, including four open-source families, GPT-5.6 Sol, and Opus 4.8 in a production agentic system, against 9 competitive baselines, including a real-world harness deployment used by hundreds of thousands of paid users. ForkPilot achieves comparable state-of-the-art performance while reducing token usage by up to 59.2%, demonstrating its efficacy.

  • 9 authors
·
Oct 3

Identifying and Exploiting Sparse Branch Correlations for Optimizing Branch Prediction

Branch prediction is arguably one of the most important speculative mechanisms within a high-performance processor architecture. A common approach to improve branch prediction accuracy is to employ lengthy history records of previously seen branch directions to capture distant correlations between branches. The larger the history, the richer the information that the predictor can exploit for discovering predictive patterns. However, without appropriate filtering, such an approach may also heavily disorganize the predictor's internal mechanisms, leading to diminishing returns. This paper studies a fundamental control-flow property: the sparsity in the correlation between branches and recent history. First, we show that sparse branch correlations exist in standard applications and, more importantly, such correlations can be computed efficiently using sparse modeling methods. Second, we introduce a sparsity-aware branch prediction mechanism that can compactly encode and store sparse models to unlock essential performance opportunities. We evaluated our approach for various design parameters demonstrating MPKI improvements of up to 42% (2.3% on average) with 2KB of additional storage overhead. Our circuit-level evaluation of the design showed that it can operate within accepted branch prediction latencies, and under reasonable power and area limitations.

RayOrch: Programming and Executing Lineage-Controlled Multi-Grain Dataflows for Foundation-Model Data Preparation

Preparing high quality training data for foundation models requires scalable pipelines that transform heterogeneous documents and videos into structured records. Such pipelines expand each parent item into an ordered and input dependent sequence of children, whose counts may be long tailed. GPUs should batch children across parents while preserving parent relationships, child order, completion status, and result routing. Existing systems either hide parallelism behind coarse grained jobs or expose flat records that force applications to manage lineage and regrouping. We present RayOrch, a programming model and distributed execution engine that preserves parent child relations throughout execution. Programs declare ordered variable cardinality expansions and matching gathers. The compiler validates each pair, while the runtime records child membership, immediate parents, immutable ordinals, and terminal states. Per Call FIFO Ready Queues batch ready children across parents. Gathers reconstruct results from declared membership and ordinals rather than batch boundaries or completion order. Parents can advance as soon as all required children become terminal. Typed parent scoped failures suppress undispatched siblings of the failed parent while allowing unrelated parents to continue. On NVIDIA H20 GPUs, RayOrch achieves 15.14 times speedup when scaling MinerU from 4 to 64 GPUs and 7.82 times speedup when scaling a video pipeline from 8 to 64 GPUs. It reduces end to end time by 13.1 percent versus Ray Data and 29.0 percent versus Daft on MinerU, and by 16.0 percent versus Ray Data on Docling. Code available at https://github.com/OpenDCAI/RayOrch .

Hogwild! Inference: Parallel LLM Generation via Concurrent Attention

Large Language Models (LLMs) have demonstrated the ability to tackle increasingly complex tasks through advanced reasoning, long-form content generation, and tool use. Solving these tasks often involves long inference-time computations. In human problem solving, a common strategy to expedite work is collaboration: by dividing the problem into sub-tasks, exploring different strategies concurrently, etc. Recent research has shown that LLMs can also operate in parallel by implementing explicit cooperation frameworks, such as voting mechanisms or the explicit creation of independent sub-tasks that can be executed in parallel. However, each of these frameworks may not be suitable for all types of tasks, which can hinder their applicability. In this work, we propose a different design approach: we run LLM "workers" in parallel , allowing them to synchronize via a concurrently-updated attention cache and prompt these workers to decide how best to collaborate. Our approach allows the instances to come up with their own collaboration strategy for the problem at hand, all the while "seeing" each other's partial progress in the concurrent cache. We implement this approach via Hogwild! Inference: a parallel LLM inference engine where multiple instances of the same LLM run in parallel with the same attention cache, with "instant" access to each other's generated tokens. Hogwild! inference takes advantage of Rotary Position Embeddings (RoPE) to avoid recomputation while improving parallel hardware utilization. We find that modern reasoning-capable LLMs can perform inference with shared Key-Value cache out of the box, without additional fine-tuning.

  • 8 authors
·
Apr 8, 2025 6

Universal Checkpointing: Efficient and Flexible Checkpointing for Large Scale Distributed Training

Existing checkpointing approaches seem ill-suited for distributed training even though hardware limitations make model parallelism, i.e., sharding model state across multiple accelerators, a requirement for model scaling. Consolidating distributed model state into a single checkpoint unacceptably slows down training, and is impractical at extreme scales. Distributed checkpoints, in contrast, are tightly coupled to the model parallelism and hardware configurations of the training run, and thus unusable on different configurations. To address this problem, we propose Universal Checkpointing, a technique that enables efficient checkpoint creation while providing the flexibility of resuming on arbitrary parallelism strategy and hardware configurations. Universal Checkpointing unlocks unprecedented capabilities for large-scale training such as improved resilience to hardware failures through continued training on remaining healthy hardware, and reduced training time through opportunistic exploitation of elastic capacity. The key insight of Universal Checkpointing is the selection of the optimal representation in each phase of the checkpointing life cycle: distributed representation for saving, and consolidated representation for loading. This is achieved using two key mechanisms. First, the universal checkpoint format, which consists of a consolidated representation of each model parameter and metadata for mapping parameter fragments into training ranks of arbitrary model-parallelism configuration. Second, the universal checkpoint language, a simple but powerful specification language for converting distributed checkpoints into the universal checkpoint format. Our evaluation demonstrates the effectiveness and generality of Universal Checkpointing on state-of-the-art model architectures and a wide range of parallelism techniques.

  • 7 authors
·
Jun 26, 2024

vSkipper: Translating Dynamic Layer Skipping into LLM Serving Gains

Dynamic layer skipping reduces LLM computation by allowing each token to execute only a subset of the model's layers. However, existing skippers rely on specialized generation loops and do not integrate with modern serving engines. As a result, fewer executed layers do not necessarily translate into lower serving latency: FlexiDepth skips 8 of Llama-3-8B's 32 layers on average, yet its standard generation loop decodes 14.6--21.0% more slowly than the base model. We present vSkipper, a virtualization layer that makes dynamic layer skippers pluggable in serving engines while preserving continuous batching, fixed-shape batches, paged KV caching, and captured decode graphs. At each routed layer, vSkipper groups tokens by the skipper's decision and uses routed execution only when predicted to be profitable. We implement vSkipper in SGLang and evaluate the released FlexiDepth checkpoint against upstream SGLang under identical prompts, arrivals, output lengths, and launch settings. At the knee of upstream's load curve, vSkipper reduces mean end-to-end latency by 36.8% on GSM8K and 13.6% on BBH. Under saturation, it increases request throughput by 11.3% and 7.4%. Serving adds no statistically resolved quality loss beyond the checkpoint's own. Across synthetic skip policies, two Qwen3 skippers, and three GPUs, we demonstrate reuse without workload-specific tuning. To our knowledge, vSkipper is the first system to realize serving-efficiency gains from per-token interior layer skipping within a modern LLM serving engine. The code is open-sourced as an SGLang fork at https://github.com/AKafakA/sglang-vskipper/tree/vskipper-ref

  • 3 authors
·
Sep 28

TokenRouter: Efficient Serving System for Token-Level LLM Routing

Large language model (LLM) routing distributes inference work across different models, advancing the cost-quality Pareto frontier of LLM serving. While coarse-grained routing at the session or query level has been widely adopted in production systems, recent algorithmic work shows that fine-grained token-level routing can yield substantial efficiency and quality gains. However, efficiently serving token-level routed inference poses significant challenges to existing systems. Built on single-LLM assumptions, current systems suffer from severe step desynchronization and frequent batch admission delays under token-level routing, and they also impose high implementation complexity on developers. To address these challenges, we design TokenRouter, an efficient and developer-friendly serving system for token-level routed LLM inference. TokenRouter follows the principle of request-centric programming, model-centric execution: developers describe routing logic from the perspective of a single request, while the runtime launches a subserver for each LLM and dispatches requests asynchronously. Each subserver employs a delayed-batching scheduler, whose optimal hyperparameters are derived from a mathematical throughput model of the system. Across diverse routing algorithms, workloads, and model pairs, TokenRouter achieves 2.01-64.15x higher decoding throughput than existing systems, substantially advancing the serving efficiency of token-level LLM routing. Our code is available at https://github.com/thu-nics/TokenRouter.

The Delegation Danger Band: Why Mid-Capability Sub-Agents Over-Trust Inherited Stale State

Agent frameworks increasingly delegate work by forking sub-agents; a common default makes the child inherit the parent's full working context. We measure how the effect of inherited state changes with capability, where C_m denotes clean fork-fresh accuracy. We compare 3 inheritance policies: Reset (fork fresh: base evidence only), Selective (curated handoff: + the useful prior conclusion), and Full (implicit fork: + the useful conclusion and d copies of a superseded conclusion) over a same-family ladder (Qwen3 0.6/1.7/4/8B) on a frozen, closed-set, action-scored benchmark. Every task is solvable from the base evidence, so performance loss can be attributed to reliance on stale state. (1) Deference to superseded state falls sharply with measured capability C_m (the slope's confidence interval, CI, excludes zero on every family) across 2 synthetic primitives plus MuSiQue and HotpotQA. (2) On the Qwen3 synthetic ladder, net inheritance harm follows a nonmonotone pattern: a mid-capability model (Qwen3-1.7B) is a statistically significant local minimum of net harm, falling below its fork-fresh baseline (Δ(32)=-0.19 [-0.25, -0.12]) and both neighbors, while the weakest model stays near-neutral and the strongest models stay robust. We call this harmful capability range a danger band. A within-model counting-difficulty sweep shows that the effect depends on model class even at matched C_m, and a live parent-to-child fork reproduces the mid-model harm. (3) Curated Selective handoff improves average accuracy over Full on all 3 datasets, largest at the in-band model, while the fixed-threshold capability router fails on the other datasets; a transferable router would need to predict the balance between reuse benefit and stale-context penalty. The benchmark is frozen and version-hashed.

  • 2 authors
·
Sep 2

In defense of parameter sharing for model-compression

When considering a model architecture, there are several ways to reduce its memory footprint. Historically, popular approaches included selecting smaller architectures and creating sparse networks through pruning. More recently, randomized parameter-sharing (RPS) methods have gained traction for model compression at start of training. In this paper, we comprehensively assess the trade-off between memory and accuracy across RPS, pruning techniques, and building smaller models. Our findings demonstrate that RPS, which is both data and model-agnostic, consistently outperforms/matches smaller models and all moderately informed pruning strategies, such as MAG, SNIP, SYNFLOW, and GRASP, across the entire compression range. This advantage becomes particularly pronounced in higher compression scenarios. Notably, even when compared to highly informed pruning techniques like Lottery Ticket Rewinding (LTR), RPS exhibits superior performance in high compression settings. This points out inherent capacity advantage that RPS enjoys over sparse models. Theoretically, we establish RPS as a superior technique in terms of memory-efficient representation when compared to pruning for linear models. This paper argues in favor of paradigm shift towards RPS based models. During our rigorous evaluation of RPS, we identified issues in the state-of-the-art RPS technique ROAST, specifically regarding stability (ROAST's sensitivity to initialization hyperparameters, often leading to divergence) and Pareto-continuity (ROAST's inability to recover the accuracy of the original model at zero compression). We provably address both of these issues. We refer to the modified RPS, which incorporates our improvements, as STABLE-RPS.

  • 2 authors
·
Oct 17, 2023

DPBench: Structural Determinants of Multi-Agent LLM Coordination Under Simultaneous Resource Contention

We present DPBench, a benchmark for evaluating coordination in multi-agent systems built from large language models. Existing benchmarks measure task-level success under a fixed protocol; the structural conditions under which coordination succeeds or fails at all have not been characterised. DPBench adapts the Dining Philosophers problem into a controlled testbed where the action protocol, the communication structure, and the group size each vary independently. We evaluate six agents: GPT-5.2, Claude Opus 4.5, Grok 4.1, Gemini 2.5 Flash, Llama 4 Maverick, and a uniform-random baseline. Under simultaneous action at N=5 with the default prompt, deadlock ranges from 25.0% (95% Wilson CI [11.2, 46.9]) for GPT-5.2 to 90.0% [74.4, 96.5] for Gemini 2.5 Flash; sequential action is solved by four of the six. Holding the model fixed at Gemini 2.5 Flash, three protocol variables drive deadlock from 90% to within CI of zero: three rounds of pre-commitment communication (0.0% vs. single-round 86.7%), a prompt encoding a classical concurrency primitive (0.0% for resource-ordering and symmetry-breaking, against 100% for the minimal prompt), or doubling the group from N=5 to N=10 (90.0% to 10.0%). Single-round messaging and memory of past timesteps do not change the rate at the sample size we ran. Whether the same model coordinates or deadlocks is determined by the protocol, not by the model's capability.

  • 2 authors
·
Jun 2

The Fused Kernel Library: A C++ API to Develop Highly-Efficient GPU Libraries

Existing GPU libraries often struggle to fully exploit the parallel resources and on-chip memory (SRAM) of GPUs when chaining multiple GPU functions as individual kernels. While Kernel Fusion (KF) techniques like Horizontal Fusion (HF) and Vertical Fusion (VF) can mitigate this, current library implementations often require library developers to manually create fused kernels. Hence, library users rely on limited sets of pre-compiled or template-based fused kernels. This limits the use cases that can benefit from HF and VF and increases development costs. In order to solve these issues, we present a novel methodology for building GPU libraries that enables automatic on-demand HF and VF for arbitrary combinations of GPU library functions. Our methodology defines reusable, fusionable components that users combine via high-level programming interfaces. Leveraging C++17 metaprogramming features available in compilers like nvcc, our methodology generates a single and optimized fused kernel tailored to the user's specific sequence of operations at compile time, without needing a custom compiler or manual development and pre-compilation of kernel combinations. This approach abstracts low-level GPU complexities while maximizing GPU resource utilization and keeping intermediate data in SRAM. We provide an open-source implementation demonstrating significant speedups compared to traditional libraries in various benchmarks, validating the effectiveness of this methodology for improving GPU performance in the range of 2x to more than 1000x, while preserving high-level programmability.

  • 4 authors
·
Aug 9, 2025

Training LLMs with Fault Tolerant HSDP on 100,000 GPUs

Large-scale training systems typically use synchronous training, requiring all GPUs to be healthy simultaneously. In our experience training on O(100K) GPUs, synchronous training results in a low efficiency due to frequent failures and long recovery time. To address this problem, we propose a novel training paradigm, Fault Tolerant Hybrid-Shared Data Parallelism (FT-HSDP). FT-HSDP uses data parallel replicas as units of fault tolerance. When failures occur, only a single data-parallel replica containing the failed GPU or server is taken offline and restarted, while the other replicas continue training. To realize this idea at scale, FT-HSDP incorporates several techniques: 1) We introduce a Fault Tolerant All Reduce (FTAR) protocol for gradient exchange across data parallel replicas. FTAR relies on the CPU to drive the complex control logic for tasks like adding or removing participants dynamically, and relies on GPU to perform data transfer for best performance. 2) We introduce a non-blocking catch-up protocol, allowing a recovering replica to join training with minimal stall. Compared with fully synchronous training at O(100K) GPUs, FT-HSDP can reduce the stall time due to failure recovery from 10 minutes to 3 minutes, increasing effective training time from 44\% to 80\%. We further demonstrate that FT-HSDP's asynchronous recovery does not bring any meaning degradation to the accuracy of the result model.

  • 23 authors
·
Jan 29

UniToolCall: Unifying Tool-Use Representation, Data, and Evaluation for LLM Agents

Tool-use capability is a fundamental component of LLM agents, enabling them to interact with external systems through structured function calls. However, existing research exhibits inconsistent interaction representations, largely overlooks the structural distribution of tool-use trajectories, and relies on incompatible evaluation benchmarks. We present UniToolCall, a unified framework for tool learning that standardizes the entire pipeline from toolset construction and dataset generation to evaluation. The framework curates a large tool pool of 22k+ tools and constructs a hybrid training corpus of 390k+ instances by combining 10 standardized public datasets with structurally controlled synthetic trajectories. It explicitly models diverse interaction patterns, including single-hop vs. multi-hop and single-turn vs. multi-turn, while capturing both serial and parallel execution structures. To support coherent multi-turn reasoning, we further introduce an Anchor Linkage mechanism that enforces cross-turn dependencies. Furthermore, we convert 7 public benchmarks into a unified Query--Action--Observation--Answer (QAOA) representation with fine-grained evaluation at the function-call, turn, and conversation levels. Experiments show that fine-tuning Qwen3-8B on our dataset substantially improves tool-use performance. Under the distractor-heavy Hybrid-20 setting, achieves 93.0% single-turn Strict Precision, outperforming commercial models including GPT, Gemini, and Claude.

  • 8 authors
·
Apr 12

Jeva: System One Models from First Principles

System one models enable direct, low-latency decision-making. Yet recent practice of predicting an answer from serialized text does not, by itself, respect the structure of a decision problem. We argue that current designs underemphasize four important structural requirements. (i) null-aware: Models should distinguish answer absence from uncertainty among candidates; (ii) permutation-invariant: Reordering alternatives should not change the decision; (iii) option-scalable: Growing candidate sets should not require redefining the output space; (iv) cacheable: Request-independent computation over recurring alternatives should be reusable across requests. We introduce Jeva, a decision-native architecture that addresses these requirements jointly. A shared encoder independently represents the request and each option, while a compact decision stack refines only the request state against immutable option memory. Symmetric aggregation yields permutation-equivariant probabilities; shared scoring accommodates variable-size candidate sets. A separate coverage estimate distinguishes answer absence from candidate competition, enabling explicit null outcomes. Request-independent option representations and layer projections support reuse across newly assembled sets. These mechanisms unify Choice, Noul, and Score outputs. Across evaluations, Jeva combines strong typed-decision performance with near-perfect null detection and no decision flips under any tested permutations. It scales to thousands of candidates and substantially reduces latency through cross-request reuse without changing decisions.

Beyond Function Calling: Benchmarking Tool-Using Agents under Tool-Environment Unreliability

Large language models are increasingly deployed as agents that solve tasks by interacting with external tool environments. Although recent tool-use benchmarks increasingly cover complex task settings, they still largely assume clean, stable, and trustworthy tool environments, leaving tool-environment unreliability insufficiently examined. We introduce ToolBench-X, a benchmark for evaluating agents under recoverable reliability hazards. ToolBench-X contains executable multi-step tasks across diverse domains and sequential, parallel, and mixed workflows, each paired with deterministic tools and a canonical final answer for automatic evaluation. Starting from clean tool environments, ToolBench-X injects five structured hazard types: Specification Drift, Invocation Error, Execution Failure, Output Drift, and Cross-source Conflict. Crucially, each injected instance remains solvable through at least one valid recovery path, such as retrying, fallback, verification, or cross-checking. Experiments reveal a substantial reliability gap: agents that perform well with reliable tools often fail under recoverable hazards. Further analysis shows that failures are driven less by tool-use volume or inference budget than by limited hazard diagnosis and ineffective recovery. Targeted recovery hints recover many failed tasks, while test-time scaling yields more limited gains. These results suggest that tool-use evaluation should move beyond function-call accuracy toward task completion under unreliable tool environments. The code and data is available at https://github.com/Foreverskyou/ToolBench-X.

  • 3 authors
·
Jun 23

Dynamic Delayed Tree Expansion For Improved Multi-Path Speculative Decoding

Multi-path speculative decoding accelerates lossless sampling from a target model by using a cheaper draft model to generate a draft tree of tokens, and then applies a verification algorithm that accepts a subset of these. While prior work has proposed various verification algorithms for i.i.d rollouts, their relative performance under matched settings remains unclear. In this work, we firstly present a systematic evaluation of verification strategies across model families, tasks, and sampling regimes, and find that Traversal Verification dominates consistently, with OT-based methods lagging far behind. Our analysis uncovers that this occurs because OT-based methods achieve high multi-token acceptance near the root of the draft tree, while multi-token gains are most impactful deeper in the draft tree, where draft and target distributions diverge. Based on this insight, we propose delayed tree expansion, which drafts a partial single path, delaying the i.i.d. branching point. We show that delayed tree expansion preserves the target distribution and improves on root-node i.i.d rollouts. Further, we develop a dynamic neural selector that estimates the expected block efficiency of optimal-transport-based verification methods from draft and target features, enabling context-dependent expansion decisions. Our neural selector allows OT-based methods like SpecInfer to outperform Traversal Verification for the first time, achieving 5% higher average throughput across a wide range of models, datasets, and sampling settings.

  • 4 authors
·
Feb 18

PORTool: Tool-Use LLM Training with Rewarded Tree

Current tool-use large language models (LLMs) are trained on static datasets, enabling them to interact with external tools and perform multi-step, tool-integrated reasoning, which produces tool-call trajectories. However, these models imitate how a query is resolved in a generic tool-call routine, thereby failing to explore possible solutions and demonstrating limited performance in an evolved, dynamic tool-call environment. In this work, we propose PORTool, a reinforcement learning (RL) method that encourages a tool-use LLM to explore various trajectories yielding the correct answer. Specifically, this method starts with generating multiple rollouts for a given query, and some of them share the first few tool-call steps, thereby forming a tree-like structure. Next, we assign rewards to each step, based on its ability to produce a correct answer and make successful tool calls. A shared step across different trajectories receives the same reward, while different steps under the same fork receive different rewards. Finally, these step-wise rewards are used to calculate fork-relative advantages, blended with trajectory-relative advantages, to train the LLM for tool use. The experiments utilize 17 tools to address user queries, covering both time-sensitive and time-invariant topics. We conduct ablation studies to systematically justify the necessity and the design robustness of step-wise rewards. Furthermore, we compare the proposed PORTool with other training approaches and demonstrate significant improvements in final accuracy and the number of tool-call steps.

apple Apple
·
Oct 29, 2025 1

ToolSpace: Scaling Tool-Centric Environment Synthesis for Long-Horizon Agents

Large language models are deployed as long-horizon agents that compose diverse tools across MCP services into executable workflows. Existing MCP environment-scaling methods are data-centric: they first synthesize a database and scenario, then derive tools and tasks from them. As a result, tool interfaces may not match real ones, tool compositions are not grounded in execution, and tasks rarely span more than one environment. We propose ToolSpace, a tool-centric framework that reverses this order. ToolSpace mines data, state, and retry dependencies from adjacent calls in execution traces of real MCP services and open agent corpora, using deterministic rules rather than LLM judgment, and clusters the resulting weighted tool-composition graph into environments. Databases are synthesized only for state-mutating environments, while query and stateless tools replay recorded returns. ToolSpace then performs state-aware random walks with rollback and decompiles each chain into a natural-language task with assertion-based checks, keeping only samples that replay successfully from the initial state. Applied to AutomationBench and tau3-Bench Banking, the pipeline produces harder Pro versions on which 7 frontier models drop by up to 38.2 points. Across seven long-horizon tool-use benchmarks, ToolSpace raises Qwen3.6-35B-A3B from 23.0 to 41.0 average score (43.2 with RL) and GLM-5.2 from 44.6 to 56.6, on par with Claude Opus 5. Ablations show that execution-witnessed edges clearly outperform LLM-judged ones, and performance keeps improving with data and environment scale.

SwissNYF: Tool Grounded LLM Agents for Black Box Setting

While Large Language Models (LLMs) have demonstrated enhanced capabilities in function-calling, these advancements primarily rely on accessing the functions' responses. This methodology is practical for simpler APIs but faces scalability issues with irreversible APIs that significantly impact the system, such as a database deletion API. Similarly, processes requiring extensive time for each API call and those necessitating forward planning, like automated action pipelines, present complex challenges. Furthermore, scenarios often arise where a generalized approach is needed because algorithms lack direct access to the specific implementations of these functions or secrets to use them. Traditional tool planning methods are inadequate in these cases, compelling the need to operate within black-box environments. Unlike their performance in tool manipulation, LLMs excel in black-box tasks, such as program synthesis. Therefore, we harness the program synthesis capabilities of LLMs to strategize tool usage in black-box settings, ensuring solutions are verified prior to implementation. We introduce TOPGUN, an ingeniously crafted approach leveraging program synthesis for black box tool planning. Accompanied by SwissNYF, a comprehensive suite that integrates black-box algorithms for planning and verification tasks, addressing the aforementioned challenges and enhancing the versatility and effectiveness of LLMs in complex API interactions. The public code for SwissNYF is available at https://github.com/iclr-dummy-user/SwissNYF.

  • 4 authors
·
Feb 15, 2024

JGS2: Near Second-order Converging Jacobi/Gauss-Seidel for GPU Elastodynamics

In parallel simulation, convergence and parallelism are often seen as inherently conflicting objectives. Improved parallelism typically entails lighter local computation and weaker coupling, which unavoidably slow the global convergence. This paper presents a novel GPU algorithm that achieves convergence rates comparable to fullspace Newton's method while maintaining good parallelizability just like the Jacobi method. Our approach is built on a key insight into the phenomenon of overshoot. Overshoot occurs when a local solver aggressively minimizes its local energy without accounting for the global context, resulting in a local update that undermines global convergence. To address this, we derive a theoretically second-order optimal solution to mitigate overshoot. Furthermore, we adapt this solution into a pre-computable form. Leveraging Cubature sampling, our runtime cost is only marginally higher than the Jacobi method, yet our algorithm converges nearly quadratically as Newton's method. We also introduce a novel full-coordinate formulation for more efficient pre-computation. Our method integrates seamlessly with the incremental potential contact method and achieves second-order convergence for both stiff and soft materials. Experimental results demonstrate that our approach delivers high-quality simulations and outperforms state-of-the-art GPU methods with 50 to 100 times better convergence.

  • 8 authors
·
Jun 5, 2025

Towards Seamless Hierarchical Federated Learning under Intermittent Client Participation: A Stagewise Decision-Making Methodology

Federated Learning (FL) offers a pioneering distributed learning paradigm that enables devices/clients to build a shared global model. This global model is obtained through frequent model transmissions between clients and a central server, which may cause high latency, energy consumption, and congestion over backhaul links. To overcome these drawbacks, Hierarchical Federated Learning (HFL) has emerged, which organizes clients into multiple clusters and utilizes edge nodes (e.g., edge servers) for intermediate model aggregations between clients and the central server. Current research on HFL mainly focus on enhancing model accuracy, latency, and energy consumption in scenarios with a stable/fixed set of clients. However, addressing the dynamic availability of clients -- a critical aspect of real-world scenarios -- remains underexplored. This study delves into optimizing client selection and client-to-edge associations in HFL under intermittent client participation so as to minimize overall system costs (i.e., delay and energy), while achieving fast model convergence. We unveil that achieving this goal involves solving a complex NP-hard problem. To tackle this, we propose a stagewise methodology that splits the solution into two stages, referred to as Plan A and Plan B. Plan A focuses on identifying long-term clients with high chance of participation in subsequent model training rounds. Plan B serves as a backup, selecting alternative clients when long-term clients are unavailable during model training rounds. This stagewise methodology offers a fresh perspective on client selection that can enhance both HFL and conventional FL via enabling low-overhead decision-making processes. Through evaluations on MNIST and CIFAR-10 datasets, we show that our methodology outperforms existing benchmarks in terms of model accuracy and system costs.

  • 8 authors
·
Sep 20, 2025

A Sublinear Algorithm for Approximate Shortest Paths in Large Networks

Computing distances and finding shortest paths in massive real-world networks is a fundamental algorithmic task in network analysis. There are two main approaches to solving this task. On one hand are traversal-based algorithms like bidirectional breadth-first search (BiBFS) with no preprocessing step and slow individual distance inquiries. On the other hand are indexing-based approaches, which maintain a large index. This allows for answering individual inquiries very fast; however, index creation is prohibitively expensive. We seek to bridge these two extremes: quickly answer distance inquiries without the need for costly preprocessing. In this work, we propose a new algorithm and data structure, WormHole, for approximate shortest path computations. WormHole leverages structural properties of social networks to build a sublinearly sized index, drawing upon the explicit core-periphery decomposition of Ben-Eliezer et al. Empirically, the preprocessing time of WormHole improves upon index-based solutions by orders of magnitude, and individual inquiries are consistently much faster than in BiBFS. The acceleration comes at the cost of a minor accuracy trade-off. Nonetheless, our empirical evidence demonstrates that WormHole accurately answers essentially all inquiries within a maximum additive error of 2. We complement these empirical results with provable theoretical guarantees, showing that WormHole requires n^{o(1)} node queries per distance inquiry in random power-law networks. In contrast, any approach without a preprocessing step requires n^{Ω(1)} queries for the same task. WormHole does not require reading the whole graph. Unlike the vast majority of index-based algorithms, it returns paths, not just distances. For faster inquiry times, it can be combined effectively with other index-based solutions, by running them only on the sublinear core.

  • 5 authors
·
Jun 11, 2024

High-performance symbolic-numerics via multiple dispatch

As mathematical computing becomes more democratized in high-level languages, high-performance symbolic-numeric systems are necessary for domain scientists and engineers to get the best performance out of their machine without deep knowledge of code optimization. Naturally, users need different term types either to have different algebraic properties for them, or to use efficient data structures. To this end, we developed Symbolics.jl, an extendable symbolic system which uses dynamic multiple dispatch to change behavior depending on the domain needs. In this work we detail an underlying abstract term interface which allows for speed without sacrificing generality. We show that by formalizing a generic API on actions independent of implementation, we can retroactively add optimized data structures to our system without changing the pre-existing term rewriters. We showcase how this can be used to optimize term construction and give a 113x acceleration on general symbolic transformations. Further, we show that such a generic API allows for complementary term-rewriting implementations. We demonstrate the ability to swap between classical term-rewriting simplifiers and e-graph-based term-rewriting simplifiers. We showcase an e-graph ruleset which minimizes the number of CPU cycles during expression evaluation, and demonstrate how it simplifies a real-world reaction-network simulation to halve the runtime. Additionally, we show a reaction-diffusion partial differential equation solver which is able to be automatically converted into symbolic expressions via multiple dispatch tracing, which is subsequently accelerated and parallelized to give a 157x simulation speedup. Together, this presents Symbolics.jl as a next-generation symbolic-numeric computing environment geared towards modeling and simulation.

  • 7 authors
·
May 9, 2021

Mara Chain: Rethinking Failure as a Stepping Stone for AI System Auto-Evolution

Optimizing deployed AI systems increasingly amounts to editing prompts, skills, harnesses, and code rather than model weights. Existing approaches commonly optimize these artifacts through propose-evaluate-select procedures, where candidate configurations are evaluated and only those meeting an acceptance criterion are selected. Yet our analysis shows that discarded candidates often contain information critical for subsequent optimization. Discarding them causes later proposals to revisit the same failure modes. We introduce Mara Chain, a refinement procedure that turns rejected candidates into stepping stones. Rather than discarding a rejected candidate, Mara Chain retains and iteratively refines it using evidence accumulated across preceding attempts. The procedure limits each refinement chain to a fixed depth and applies Pareto-filtered Top-N selection to bound the candidate pool. Across AppWorld skill optimization, TerminalBench 2.1 harness optimization, and MuSiQue retrieval-pipeline optimization, Mara Chain delivers greater task-performance gains with fewer rollouts. It outperforms GEPA, ACE, and SkillOpt-Lite by up to 20.5% in relative performance on AppWorld, reaching the target score with 65.5% fewer rollouts than GEPA. It improves the pass rate by 20.2 and 22.5 percentage points over AHE and Meta-Harness on TerminalBench 2.1, respectively, and improves MuSiQue test nDCG@10 and Recall@10 by 0.104 and 0.131 over a hand-written retrieval pipeline.

antgroup Ant Group
·
Sep 24 2

STEPWISE-CODEX-Bench: Evaluating Complex Multi-Function Comprehension and Fine-Grained Execution Reasoning

In recent years, large language models (LLMs) have made significant progress in code intelligence, yet systematically evaluating their code understanding and reasoning abilities remains challenging. Mainstream benchmarks such as HumanEval and MBPP primarily assess functional correctness, while reasoning benchmarks like CRUXEVAL are limited to single-function, low-complexity scenarios. As a result, advanced models achieve nearly saturated scores, limiting their discriminative power. To address this, we present STEPWISE-CODEX-Bench (SX-Bench), a novel benchmark designed for complex multi-function understanding and fine-grained execution reasoning. SX-Bench features tasks involving collaboration among multiple sub-functions (e.g., chained calls, nested loops), shifting evaluation towards overall control and data flow modeling. It defines "computation steps" as the minimal execution unit and requires models to predict the total number of steps in reasoning tasks, thereby assessing a model's in-depth understanding of dynamic execution beyond simple I/O matching. Evaluation on over 20 mainstream models (including 14 reasoning-enhanced models) demonstrates that SX-Bench is highly discriminative: even the state-of-the-art OpenAI-O3 achieves only 78.37 percent accuracy on Hard-Reasoning tasks, much lower than its saturated scores on previous benchmarks, thereby revealing bottlenecks in complex and fine-grained reasoning. We also release an automated pipeline combining program synthesis, symbolic execution, and LLM-aided validation for efficient benchmark generation and quality assurance. SX-Bench advances code evaluation from "single-function verification" to "multi-function dynamic reasoning," providing a key tool for the in-depth assessment of advanced code intelligence models.

  • 6 authors
·
Aug 7, 2025

Tool Learning with Large Language Models: A Survey

Recently, tool learning with large language models (LLMs) has emerged as a promising paradigm for augmenting the capabilities of LLMs to tackle highly complex problems. Despite growing attention and rapid advancements in this field, the existing literature remains fragmented and lacks systematic organization, posing barriers to entry for newcomers. This gap motivates us to conduct a comprehensive survey of existing works on tool learning with LLMs. In this survey, we focus on reviewing existing literature from the two primary aspects (1) why tool learning is beneficial and (2) how tool learning is implemented, enabling a comprehensive understanding of tool learning with LLMs. We first explore the "why" by reviewing both the benefits of tool integration and the inherent benefits of the tool learning paradigm from six specific aspects. In terms of "how", we systematically review the literature according to a taxonomy of four key stages in the tool learning workflow: task planning, tool selection, tool calling, and response generation. Additionally, we provide a detailed summary of existing benchmarks and evaluation methods, categorizing them according to their relevance to different stages. Finally, we discuss current challenges and outline potential future directions, aiming to inspire both researchers and industrial developers to further explore this emerging and promising area. We also maintain a GitHub repository to continually keep track of the relevant papers and resources in this rising area at https://github.com/quchangle1/LLM-Tool-Survey.

  • 8 authors
·
May 28, 2024

Breaking the Bubble: Asynchronous Pipeline Parallel Training with Bounded Weight Inconsistency

Pipeline parallelism is essential for training large neural networks, but existing schedules trade off throughput, memory, and optimization consistency. Synchronous pipelines preserve forward/backward weight consistency but suffer from bubbles; asynchronous pipelines remove bubbles but introduce weight-version mismatch, typically requiring weight stashing, prediction, or correction mechanisms. We introduce PACI (Pipeline Asynchronous training with Controlled Inconsistency), a bubble-free asynchronous pipeline method that bounds forward/backward version drift without weight stashing, prediction, additional parameter copies, or global synchronization. The key idea is to use local gradient accumulation as a version-control mechanism: by slowing parameter-version evolution relative to pipeline delay, PACI limits the number of optimizer updates crossed by any micro-batch while preserving steady-state utilization. In GPT-style language-model pretraining, PACI matches the stability and final perplexity of synchronous 1F1B-flush, retains the same peak memory footprint, achieves fully utilized pipeline throughput, and improves training time-to-accuracy by up to 1.69times over the fastest flush baseline. These results show that forward/backward inconsistency need not be eliminated: when explicitly bounded, it can be safely traded for substantial efficiency gains.

ParaTempo: Efficient Parallel Reasoning via Temporal Confidence

Parallel reasoning improves the accuracy and robustness of large reasoning models by exploring multiple solution paths, but its computational cost grows with reasoning depth and branch count. Existing methods for managing these parallel paths typically rely on final-answer consensus, local token confidence, or isolated intermediate probes. However, these signals are often delayed, weakly tied to actual reasoning progress, or too noisy for dynamic, branch-level control. To address these limitations, we introduce ParaTempo, a training-free asynchronous parallel reasoning framework. ParaTempo is driven by temporal confidence, a branch-local measure of answer-space convergence. Each branch is periodically probed for a tentative answer probability distribution, and temporal confidence quantifies how sharply the recent intermediate probes concentrate on a dominant answer. Once sufficient evidence has accumulated, ParaTempo drives its entire control process from this single signal: low-confidence branches are pruned, branches that persistently commit to their dominant answer are retired early, freed computation is reallocated by forking new branches, and generation stops globally once the confidence-weighted vote concentrates. Without requiring synchronization among reasoning trajectories, ParaTempo adaptively allocates computation based on branch-level convergence. Experiments on challenging mathematical and scientific reasoning benchmarks show that ParaTempo reduces average latency by 21.8-32.2% and total token usage by 18.1-30.3% while maintaining competitive accuracy. Moreover, temporal confidence exhibits stronger temporal stability and predictive power for future branch convergence than token-level and instantaneous signals.

LIFL: A Lightweight, Event-driven Serverless Platform for Federated Learning

Federated Learning (FL) typically involves a large-scale, distributed system with individual user devices/servers training models locally and then aggregating their model updates on a trusted central server. Existing systems for FL often use an always-on server for model aggregation, which can be inefficient in terms of resource utilization. They may also be inelastic in their resource management. This is particularly exacerbated when aggregating model updates at scale in a highly dynamic environment with varying numbers of heterogeneous user devices/servers. We present LIFL, a lightweight and elastic serverless cloud platform with fine-grained resource management for efficient FL aggregation at scale. LIFL is enhanced by a streamlined, event-driven serverless design that eliminates the individual heavy-weight message broker and replaces inefficient container-based sidecars with lightweight eBPF-based proxies. We leverage shared memory processing to achieve high-performance communication for hierarchical aggregation, which is commonly adopted to speed up FL aggregation at scale. We further introduce locality-aware placement in LIFL to maximize the benefits of shared memory processing. LIFL precisely scales and carefully reuses the resources for hierarchical aggregation to achieve the highest degree of parallelism while minimizing the aggregation time and resource consumption. Our experimental results show that LIFL achieves significant improvement in resource efficiency and aggregation speed for supporting FL at scale, compared to existing serverful and serverless FL systems.

  • 3 authors
·
May 5, 2024

DADAO: Decoupled Accelerated Decentralized Asynchronous Optimization

This work introduces DADAO: the first decentralized, accelerated, asynchronous, primal, first-order algorithm to minimize a sum of L-smooth and mu-strongly convex functions distributed over a given network of size n. Our key insight is based on modeling the local gradient updates and gossip communication procedures with separate independent Poisson Point Processes. This allows us to decouple the computation and communication steps, which can be run in parallel, while making the whole approach completely asynchronous, leading to communication acceleration compared to synchronous approaches. Our new method employs primal gradients and does not use a multi-consensus inner loop nor other ad-hoc mechanisms such as Error Feedback, Gradient Tracking, or a Proximal operator. By relating the inverse of the smallest positive eigenvalue of the Laplacian matrix chi_1 and the maximal resistance chi_2leq chi_1 of the graph to a sufficient minimal communication rate between the nodes of the network, we show that our algorithm requires O(nfrac{L{mu}}log(1{epsilon})) local gradients and only O(nchi_1chi_2frac{L{mu}}log(1{epsilon})) communications to reach a precision epsilon, up to logarithmic terms. Thus, we simultaneously obtain an accelerated rate for both computations and communications, leading to an improvement over state-of-the-art works, our simulations further validating the strength of our relatively unconstrained method. We also propose a SDP relaxation to find the optimal gossip rate of each edge minimizing the total number of communications for a given graph, resulting in faster convergence compared to standard approaches relying on uniform communication weights. Our source code is released on a public repository.

  • 2 authors
·
Jul 26, 2022

Divide-and-Conquer Meets Consensus: Unleashing the Power of Functions in Code Generation

Despite recent progress made by large language models in code generation, they still struggle with programs that meet complex requirements. Recent work utilizes plan-and-solve decomposition to decrease the complexity and leverage self-tests to refine the generated program. Yet, planning deep-inside requirements in advance can be challenging, and the tests need to be accurate to accomplish self-improvement. To this end, we propose FunCoder, a code generation framework incorporating the divide-and-conquer strategy with functional consensus. Specifically, FunCoder recursively branches off sub-functions as smaller goals during code generation, represented by a tree hierarchy. These sub-functions are then composited to attain more complex objectives. Additionally, we designate functions via a consensus formed by identifying similarities in program behavior, mitigating error propagation. FunCoder outperforms state-of-the-art methods by +9.8% on average in HumanEval, MBPP, xCodeEval and MATH with GPT-3.5 and GPT-4. Moreover, our method demonstrates superiority on smaller models: With FunCoder, StableCode-3b surpasses GPT-3.5 by +18.6% and achieves 97.7% of GPT-4's performance on HumanEval. Further analysis reveals that our proposed dynamic function decomposition is capable of handling complex requirements, and the functional consensus prevails over self-testing in correctness evaluation.

  • 7 authors
·
May 30, 2024

CASCADE: Cascaded Scoped Communication for Multi-Agent Re-planning in Disrupted Industrial Environments

Industrial disruption replanning demands multi-agent coordination under strict latency and communication budgets, where disruptions propagate through tightly coupled physical dependencies and rapidly invalidate baseline schedules and commitments. Existing coordination schemes often treat communication as either effectively free (broadcast-style escalation) or fixed in advance (hand-tuned neighborhoods), both of which are brittle once the disruption footprint extends beyond a local region. We present \CASCADE, a budgeted replanning mechanism that makes communication scope explicit and auditable rather than fixed or implicit. Each agent maintains an explicit knowledge base, solves role-conditioned local decision problems to revise commitments, and coordinates through lightweight contract primitives whose footprint expands only when local validation indicates that the current scope is insufficient. This design separates a unified agent substrate (Knowledge Base / Decision Manager / Communication Manager) from a scoped interaction layer that controls who is contacted, how far coordination propagates, and when escalation is triggered under explicit budgets. We evaluate \CASCADE on disrupted manufacturing and supply-chain settings using unified diagnostics intended to test a mechanism-design claim -- whether explicit scope control yields useful quality-latency-communication trade-offs and improved robustness under uncertainty -- rather than to provide a complete algorithmic ranking.

  • 1 authors
·
Mar 31

FarSkip-Collective: Unhobbling Blocking Communication in Mixture of Experts Models

Blocking communication presents a major hurdle in running MoEs efficiently in distributed settings. To address this, we present FarSkip-Collective which modifies the architecture of modern models to enable overlapping of their computation with communication. Our approach modifies the architecture to skip connections in the model and it is unclear a priori whether the modified model architecture can remain as capable, especially for large state-of-the-art models and while modifying all of the model layers. We answer this question in the affirmative and fully convert a series of state-of-the-art models varying from 16B to 109B parameters to enable overlapping of their communication while achieving accuracy that is comparable with their original open-source releases. For example, we convert Llama 4 Scout (109B) via self-distillation and achieve average accuracy within 1% of its instruction tuned release averaged over a wide range of downstream evaluations. In addition to demonstrating retained accuracy of the large modified models, we realize the benefits of FarSkip-Collective through optimized implementations that explicitly overlap communication with computation, accelerating both training and inference in existing frameworks. For inference, we demonstrate 32.6% speedup in Time To First Token when serving a converted DeepSeek-V3 architecture with expert parallelism in SGLang and achieve 97.3% communication-computation overlap during the prefill stage. During training, our approach enables 88.9% communication overlap of the all-to-all communication collectives when pre-training DeepSeek-V3 MoE layers with expert parallelism.

  • 6 authors
·
May 26

GitSwarm: Decentralized Compounding Inference

Long-horizon problem solving and scientific research require computation to accumulate across successive attempts. Partial solutions, experimental findings, and unsuccessful approaches can inform later work, yet most inference-time computation is organized around individual trajectories or candidates rather than a persistent body of reusable work. We call this paradigm compounding inference: organizing inference-time computation so that intermediate work persists and can be inspected, extended, combined, or challenged by subsequent computation. We instantiate compounding inference in GitSwarm, an asynchronous system where homogeneous agents independently decide how to advance a task while collaborating through structured persistent memory. Agents explore, experiment, verify, refine, and synthesize previous work in a shared, branch-able Git repository. Atomic commits preserve intermediate artifacts, while explicit semantic dependencies record how later contributions build on work across branches. We evaluate GitSwarm on long-horizon problem solving and sustained GPU-backed experimental research. On IMOProofBench-Advanced, GitSwarm solves all 30 problems in one run using GPT-5.5. On ProgramBench, it achieves a 79.4% mean score, versus 65.1% for the strongest reported baseline under the stated budget. On three neural architecture research tasks (Residual Matrix Transformer, Looped Transformer, NanoChat), GitSwarm improves upon the starting architectures through successive experimentation. Beyond final performance, we measure whether computation accumulates: on ProgramBench, 94.7% of contributions are subsequently built upon, while the selected solution's ancestry covers 82-93% of the contribution graph. These results show that inference-time computation can accumulate across otherwise independent episodes, forming an evolving body of work that subsequent inference can reuse.

  • 14 authors
·
Oct 3

Evoflux: Inference-Time Evolution of Executable Tool Workflows for Compact Agents

Compact language models (LMs) reduce cost, latency, and deployment risk for tool agents. Yet MCP-style tool use requires more than isolated function calling: an agent must discover tools from live catalogs, satisfy schemas, preserve dependencies across intermediate outputs, and ground final responses in executed evidence. Small planners often generate plausible workflow graphs that fail under tool resolution, parameter validation, dependency tracking, or execution. We argue that this failure mode is poorly handled by small-corpus distillation. A few hundred teacher traces can teach workflow format, but rarely cover the recovery behavior needed to repair failed plans over changing tool catalogs. We introduce Evoflux, an inference-time evolutionary search method that treats compact tool use as the repair of executable tool workflows. It evolves typed workflow graphs through structured edits, execution feedback, adaptive intensity, meta-guided redesign, and diversity pruning. On held-out MCP-Bench tasks spanning live MCP servers and 250 tools, Evoflux raises execution feasibility from roughly 3% to 17-24% across small planners. In contrast, SFT and SFT+DPO on the same search-mined data match, underperform, or collapse below zero-shot performance; ReAct reaches higher peaks, but with higher variance and token cost. These results show that execution-grounded search is more reliable under scarce teacher-trace budgets.

Conflict-Free Replicated Data Types for Neural Network Model Merging: A Two-Layer Architecture Enabling CRDT-Compliant Model Merging Across 26 Strategies

All 26 neural network merge strategies we tested including weight averaging, SLERP, TIES, DARE, Fisher merging, and evolutionary approaches -- fail the algebraic properties (commutativity, associativity, idempotency) required for conflict-free distributed operation. We prove that this failure is structural: normalisation-based merges cannot simultaneously satisfy all three properties. To resolve this, we present a two-layer architecture -- CRDTMergeState -- that wraps any merge strategy in a CRDT-compliant (Conflict-Free Replicated Data Type) layer. Layer 1 manages contributions via OR-Set CRDT semantics, where the merge operation is set union -- trivially commutative, associative, and idempotent. Layer 2 applies merge strategies as deterministic pure functions over a canonically-ordered contribution set, with randomness seeded from the Merkle root. We prove that this separation guarantees Strong Eventual Consistency: all replicas receiving the same contributions compute identical merged models, regardless of message ordering. Empirical validation spans three tiers: controlled 4x4 tensors (104/104 tests pass), production-scale models up to 7.24B parameters (208 strategy-level tests, 43,368 layer-level property checks at capped tensor resolution), and multi-node convergence under gossip and partition healing (100 nodes, 20 orderings), with CRDT overhead below 0.5 ms. Because the wrapper is transparent, downstream performance is identical by construction, confirmed via byte-identical output verification. The reference implementation is available as crdt-merge v0.9.4.

  • 1 authors
·
May 15

h1: A Taste of the Bitter Lesson in Automated Theorem Proving

While progress in informal mathematics has come largely from scaling the chain-of-thought and agentic reasoning of frontier language models, formal theorem proving has increasingly relied on human-designed workflows around these models, such as planning, decomposition, and orchestrating specialized provers. This raises a bitter-lesson question: can a simple agentic loop that scales test-time compute match these workflows? The answer matters as formal verification must scale to keep up with frontier models producing research mathematics, yet new workflows rarely settle it, as their gains are often confounded with stronger models or more compute. We study this question with h1, a simple harness that gives a model an efficient interface to Lean 4 and keeps it working through verifier feedback and self-reflection, without imposing a decomposition or search structure. h1 reaches state-of-the-art results on PutnamBench, FATE-X, and FormalConjectures100-Solved, settles eight open problems in FormalConjectures, and, at matched models, matches or outperforms specialized workflows such as Goedel-Architect and AlphaProof Nexus, surprisingly showing that a single attempt (pass@1) can often scale to solve open problems. Through ablations and matched-model comparisons with Claude Code and AxProverBase, we find that simplicity alone is not enough: an efficient Lean interface largely determines cost and solve rate. We thus recommend that future work evaluate frontier models with efficient execution feedback before prescribing workflows, at the risk of bitter lessons.

meta-llama Meta Llama
·
Oct 24 2

Bridging Protocol and Production: Design Patterns for Deploying AI Agents with Model Context Protocol

The Model Context Protocol (MCP) standardizes how AI agents discover and invoke external tools, with over 10,000 active servers and 97 million monthly SDK downloads as of early 2026. Yet MCP does not yet standardize how agents safely operate those tools at production scale. Three protocol-level primitives remain missing: identity propagation, adaptive tool budgeting, and structured error semantics. This paper identifies these gaps through field lessons from an enterprise deployment of an AI agent platform integrated with a major cloud provider's MCP servers (client name redacted). We propose three mechanisms to fill them: (1) the Context-Aware Broker Protocol (CABP), which extends JSON-RPC with identity-scoped request routing via a six-stage broker pipeline; (2) Adaptive Timeout Budget Allocation (ATBA), which frames sequential tool invocation as a budget allocation problem over heterogeneous latency distributions; and (3) the Structured Error Recovery Framework (SERF), which provides machine-readable failure semantics that enable deterministic agent self-correction. We organize production failure modes into five design dimensions (server contracts, user context, timeouts, errors, and observability), document concrete failure vignettes, and present a production readiness checklist. All three algorithms are formalized as testable hypotheses with reproducible experimental methodology. Field observations demonstrate that while MCP provides a solid protocol foundation, reliable agent tool integration requires infrastructure-level mechanisms that the specification does not yet address.

  • 1 authors
·
Mar 11

AsyncTool: Evaluating the Asynchronous Function Calling Capability under Multi-Task Scenarios

Large language model (LLM)-based agents have shown strong capabilities in using external tools to solve complex tasks. However, existing evaluations often overlook the temporal dimension of tool use, especially the impact of tool response latency, and are usually limited to single-task settings. In real-world applications, multiple tasks often need to be executed concurrently, and overall efficiency depends on whether an agent can use idle time while waiting for tool responses. We refer to this capability as asynchronous tool calling. To evaluate it, we propose AsyncTool, a benchmark for assessing LLM-based agents in interactive multi-task tool-use environments with delayed tool feedback. AsyncTool presents multiple heterogeneous tasks simultaneously and simulates realistic tool response latency during execution. Using a hybrid data evolution strategy, we construct a diverse asynchronous multitasking dataset that covers multiple scenarios and tool-use patterns. We evaluate models at the step, sub-task, and task levels, and introduce efficiency-oriented metrics to measure task coordination and completion efficiency. Extensive experiments show that delayed tool feedback poses substantial challenges to current agents and leads to clear performance degradation. Models that better coordinate task switching, dependency tracking, and state maintenance achieve stronger performance on AsyncTool. Our analysis identifies key failure modes of current tool-using agents and provides practical insights for designing future systems with stronger temporal reasoning and coordination capabilities.

Effective Strategies for Asynchronous Software Engineering Agents

AI agents have become increasingly capable at isolated software engineering (SWE) tasks such as resolving issues on Github. Yet long-horizon tasks involving multiple interdependent subtasks still pose challenges both with respect to accuracy, and with respect to timely completion. A natural approach to solving these long-horizon tasks in a timely manner is asynchronous multi-agent collaboration, where multiple agents work on different parts of the task at the same time. But effective application of multi-agent systems has proven surprisingly difficult: concurrent edits by multiple agents interfere with each other, dependencies are difficult to synchronize, and combining partial progress into a coherent whole is challenging. On the other hand, human developers have long relied on mature collaboration infrastructure to manage these challenges in large software projects. Inspired by these collaboration primitives, we introduce Centralized Asynchronous Isolated Delegation (CAID), a structured multi-agent coordination paradigm grounded in three core SWE primitives: centralized task delegation, asynchronous execution, and isolated workspaces. CAID constructs dependency-aware task plans through a central manager, executes subtasks concurrently in isolated workspaces, and consolidates progress via structured integration with executable test-based verification. In empirical evaluation, we find that CAID improves accuracy over single-agent baselines by 26.7% absolute on paper reproduction tasks (PaperBench) and 14.3% on Python library development tasks (Commit0). Through systematic analysis, we find that branch-and-merge is a central coordination mechanism for multi-agent collaboration, and that SWE primitives such as git worktree, git commit, and git merge enable it to be realized in a reliable and executable manner.

  • 2 authors
·
Mar 22 1

The Relational Machine Calculus

This paper presents the Relational Machine Calculus (RMC): a simple, foundational model of first-order relational programming. The RMC originates from the Functional Machine Calculus (FMC), which generalizes the lambda-calculus and its standard call-by-name stack machine in two directions. One, "locations", introduces multiple stacks, which enable effect operators to be encoded into the abstraction and application constructs. The second, "sequencing", introduces the imperative notions of "skip" and "sequence", similar to kappa-calculus and concatenative programming languages. The key observation of the RMC is that the first-order fragment of the FMC exhibits a latent duality which, given a simple decomposition of the relevant constructors, can be concretely expressed as an involution on syntax. Semantically, this gives rise to a sound and complete calculus for string diagrams of Frobenius monoids. We consider unification as the corresponding symmetric generalization of beta-reduction. By further including standard operators of Kleene algebra, the RMC embeds a range of computational models: the kappa-calculus, logic programming, automata, Interaction Nets, and Petri Nets, among others. These embeddings preserve operational semantics, which for the RMC is again given by a generalization of the standard stack machine for the lambda-calculus. The equational theory of the RMC (which supports reasoning about its operational semantics) is conservative over both the first-order lambda-calculus and Kleene algebra, and can be oriented to give a confluent reduction relation.

  • 3 authors
·
May 17, 2024

Album: executable building blocks for scientific imaging routines, from sharing to LLM-assisted orchestration

Open-source scientific software is a major driver of scientific progress, yet its development and reuse remain difficult in collaborative settings. Researchers repeatedly face four recurring challenges: discovering and reproducing existing routines, adapting them for new use cases, sharing and scaling them across collaborators, and stabilizing them with reproducible execution environments. We present Album, an open-source framework for packaging and sharing scientific routines as executable artifacts through two minimal primitives: (i) the solution, a Python-native executable entry point that combines machine-readable metadata, arguments, environment specifications, and lifecycle hooks; and (ii) the catalog, a decentralized, git-native distribution mechanism with indexed search and optional web rendering for discovery, provenance, and governance. Album uses a two-context execution model in which a host controller evaluates manifests and prepares per-solution environments, while lifecycle hooks execute inside isolated solution environments. This design supports reproducible execution, post-environment setup, and the composition of routines with incompatible dependencies. Album can be used in conjunction with LLM agents: solutions can be drafted and revised with LLM assistance, and a MCP interface exposes cataloged solutions as callable tools for tool-grounded discovery and orchestration. We evaluate Album through four realworld imaging deployments spanning interactive visualization of electron microscopy data, integration of multiple segmentation methods, the orchestration of cryo-electron tomography competition workflows, and mineral quantification pipelines. Overall, Album complements package managers, workflow systems, and container runtimes by making scientific routines executable, shareable artifacts. Documentation and examples are available at https://album.solutions.

  • 5 authors
·
Apr 20

FormaTheoria: Constructing Large-Scale Lean Theories from Mathematical Literature - Toward the Formalization of the Classification of Finite Simple Groups

Large-scale formalization of advanced mathematics requires more than translating individual statements: it must reconstruct a coherent theory distributed across heterogeneous sources. This process raises four challenges: discovering implicit dependencies, correcting source defects, preserving semantic fidelity, and reconciling cross-source misalignments. We present FormaTheoria, an end-to-end, AI-assisted workflow that coordinates source acquisition, formalization, proof construction, recursive dependency discovery, independent review, and reconciliation, while preserving provenance and protecting approved declarations. A shared agent framework supports long-horizon execution through tool use, context compaction, review-gated termination, section-level source context, and dependency-aware batch parallelization. Applying FormaTheoria to major components of the Classification of Finite Simple Groups (CFSG), we construct a machine-checked Lean development extending through the Bender--Suzuki theorem and encompassing the Feit--Thompson Odd Order Theorem, Glauberman's Z^* theorem, and the Brauer--Suzuki theorem. This development verifies an extensive body of deeply interdependent finite-group theory while providing a foundation for continuing the CFSG formalization. An empirical analysis of the code and recorded construction process supports the practical relevance of the identified challenges and illustrates the roles of the corresponding workflow components. Together, these results demonstrate how AI-assisted workflows can reconstruct mathematically significant formal theories from distributed literature by combining language-model agents with formal verification, structured review, and explicit dependency management.

  • 7 authors
·
Aug 10

The Tasteful Agent: Measuring and Improving Taste in Long-Horizon Tasks

LLM agents increasingly work on long-horizon tasks, and the decisions they make along the way, such as which hypothesis to test or which implementation to build on, determine the outcome of the whole run. Making these decisions well is becoming a key capability for both engineering and research agents. We refer to the ability to make good long-horizon decisions as the taste of an agent. While existing benchmarks measure the end-to-end success of agents on long-horizon tasks, none of them measures the taste of an agent. To address this problem, we build Taste-Bench, a benchmark of taste questions constructed automatically from trajectories that agents produced in engineering and research tasks. Each question presents a decision fork, a point in a trajectory where multiple directions are available and one of them leads to a better outcome, and the evaluated model chooses among these directions without seeing what happens after the fork. We mine these forks automatically from parallel attempts at the same task and from detours inside a single trajectory, without needing human annotation. We evaluate frontier models on Taste-Bench and find that the best model answers only 59.7% of the questions correctly. We further find that forks whose deciding evidence appears later in the trajectory are much harder for every model, and that a larger reasoning budget does not improve the accuracy. Finally, we show that taste can be trained. We distill the judgment of a teacher that has seen the outcome into a student model, and the student makes better decisions on unseen tasks and improves end-to-end success on held-out SWE-bench Pro tasks.

microsoft Microsoft
·
Sep 21 6

DataStates-LLM: Lazy Asynchronous Checkpointing for Large Language Models

LLMs have seen rapid adoption in all domains. They need to be trained on high-end high-performance computing (HPC) infrastructures and ingest massive amounts of input data. Unsurprisingly, at such a large scale, unexpected events (e.g., failures of components, instability of the software, undesirable learning patterns, etc.), are frequent and typically impact the training in a negative fashion. Thus, LLMs need to be checkpointed frequently so that they can be rolled back to a stable state and subsequently fine-tuned. However, given the large sizes of LLMs, a straightforward checkpointing solution that directly writes the model parameters and optimizer state to persistent storage (e.g., a parallel file system), incurs significant I/O overheads. To address this challenge, in this paper we study how to reduce the I/O overheads for enabling fast and scalable checkpointing for LLMs that can be applied at high frequency (up to the granularity of individual iterations) without significant impact on the training process. Specifically, we introduce a lazy asynchronous multi-level approach that takes advantage of the fact that the tensors making up the model and optimizer state shards remain immutable for extended periods of time, which makes it possible to copy their content in the background with minimal interference during the training process. We evaluate our approach at scales of up to 180 GPUs using different model sizes, parallelism settings, and checkpointing frequencies. The results show up to 48times faster checkpointing and 2.2times faster end-to-end training runtime compared with the state-of-art checkpointing approaches.

  • 5 authors
·
Jun 15, 2024

Harness Engineering in LLM Tool Use via Agent-Native Reusable Tool Primitives

Large language models (LLMs) augmented with external tools have demonstrated remarkable capability in solving complex real-world tasks. However, existing approaches suffer from two key challenges: brittle multi-step and multi-turn reasoning caused by incompatible tool output types and API schemas, and performance degradation under large tool catalogues. To address these, we introduce Tool Primitives, a design that replaces rigid API schema-based invocation with natural language as the interface for tool calling, where each tool is wrapped with an LLM interface that handles schema resolution and execution internally, enabling natural inter-tool communication for nested and multi-turn tool calling. Building on Tool Primitives, we host ToolFace, a centralized repository of 25,519 functions from which LLMs dynamically retrieve only the relevant tools at inference time, eliminating the need to enumerate raw API schemas in context. To orchestrate Tool Primitives and ToolFace reliably in complex settings, we further propose HEART, a Harness Engineering framework via Agent-native, Reusable Tool Primitives, comprising a Planner, Router, and Verifier that jointly support dynamic tool invocation planning, multi-step execution, and feedback-driven recovery. Experiments on five benchmarks demonstrate that HEART outperforms SFT-based models by 10% on average and surpasses GPT-5.4, Claude-4.6-Sonnet, and Gemini-3.1-Pro by 6% on average while reducing API cost by up to 85%. On 50 real-world tasks, HEART achieves 84% task completion, 3.8times the average of three frontier commercial models (22%).

  • 5 authors
·
Aug 31

Draft in Parallel, Condition Through Depth: Adjacent Causal Injection for Speculative Decoding

Parallel speculative drafting generates multiple candidates in one backbone pass, but independent token selection can produce inconsistent continuations that shorten the accepted prefix. Existing methods mostly leave conditional decoding to a lightweight module after the backbone, which limits the flow of predecessor information to successors. Our analysis of DFlash shows that early positions already form recoverable predictions in shallow layers, and that accurate adjacent predecessors help successors more when they enter earlier. We therefore propose DSpine, a drafter with causal conditioning injection throughout the backbone: at every layer, gated adjacent injection writes each predecessor's predicted feature into its successor, so the causal conditioning chain unfolds over network depth while all positions update in parallel. A unified transfer space built from the target model's output embeddings unifies layer-wise injection with predecessor-conditioned decoding, and layer-wise output-embedding supervision promotes the formation of predicted features in shallow layers. Fused kernels and a transition cache execute both efficiently in parallel within SGLang. Across seven math, code, and chat benchmarks, DSpine achieves the longest acceptance length at both temperatures on Qwen3-4B and Qwen3-8B. At temperature zero on Qwen3-8B, it raises the seven-benchmark mean from DFlash's 3.77 to 4.82 (+27.8%); in SGLang serving tests, it delivers 23.3% higher throughput than DFlash on average.

  • 7 authors
·
Sep 27

From Static Templates to Dynamic Runtime Graphs: A Survey of Workflow Optimization for LLM Agents

Large language model (LLM)-based systems are becoming increasingly popular for solving tasks by constructing executable workflows that interleave LLM calls, information retrieval, tool use, code execution, memory updates, and verification. This survey reviews recent methods for designing and optimizing such workflows, which we treat as agentic computation graphs (ACGs). We organize the literature based on when workflow structure is determined, where structure refers to which components or agents are present, how they depend on each other, and how information flows between them. This lens distinguishes static methods, which fix a reusable workflow scaffold before deployment, from dynamic methods, which select, generate, or revise the workflow for a particular run before or during execution. We further organize prior work along three dimensions: when structure is determined, what part of the workflow is optimized, and which evaluation signals guide optimization (e.g., task metrics, verifier signals, preferences, or trace-derived feedback). We also distinguish reusable workflow templates, run-specific realized graphs, and execution traces, separating reusable design choices from the structures actually deployed in a given run and from realized runtime behavior. Finally, we outline a structure-aware evaluation perspective that complements downstream task metrics with graph-level properties, execution cost, robustness, and structural variation across inputs. Our goal is to provide a clear vocabulary, a unified framework for positioning new methods, a more comparable view of existing body of literature, and a more reproducible evaluation standard for future work in workflow optimizations for LLM agents.

ibm IBM
·
Mar 23 2

ContinuityBench: A Benchmark and Systems Study of Stateful Failover in Multi-Provider LLM Routing

In production large language model (LLM) deployments, high API availability guarantees do not equate to conversational continuity. When a primary provider experiences an outage or strict rate-limiting, naive stateless failover mechanisms successfully maintain uptime but silently discard conversation history, severely disrupting the user experience. To rigorously quantify and resolve this failure mode, we introduce two novel metrics: Continuity Preservation Rate (CPR) and Continuity Latency Overhead (CLO). We propose a stateful, multi-provider proxy architecture utilizing a History-Forwarding strategy to seamlessly reconstruct conversational state across heterogeneous LLM endpoints during failover events. Furthermore, we release continuity-bench, https://github.com/Vishal-sys-code/continuity-bench, an open evaluation harness designed to stress-test context preservation under high-concurrency provider failure conditions. Our empirical evaluation (N=750 failover events) demonstrates that our stateful proxy achieves a 99.20\% CPR [95\% CI: 98.27\%, 99.63\%], cleanly transferring deep conversational context to fallback providers, compared to a near-0\% preservation rate for standard stateless architectures. Finally, we characterize failover latency distributions, identifying the critical necessity of asynchronous exponential backoff with jitter to prevent cascading retry storms against strict-limit fallback APIs. Our results provide a principled foundation for building robust, state-preserving multi-model inference systems.

  • 2 authors
·
Jul 16

WEFT: Scaling Tool-Use Post-Training for General-Purpose Agents

Recent efforts to scale tool-use post-training have largely centered on the synthesis of executable environments, which constitute only one component of a broader agentic interaction system comprising the environment, task, agent harness, and evaluator. Scaling environments in isolation, however, does not guarantee commensurate gains in model performance, because reliable learning signals depend on coherent interactions among all components of the agentic interaction system. To address this problem, we introduce WEFT (Whole-system Evolution For Tool-use Post-training), which couples scalable agentic interaction system construction, execution-driven self-evolution, and stable post-training. WEFT scales agentic interaction system construction across environment breadth, task complexity, and interaction diversity. Execution-driven self-evolution iteratively uses execution traces and state evidence to attribute failures and revise the responsible components, with fresh rollouts evaluating the changes and providing evidence for subsequent evolution rounds. For stable post-training at scale, WEFT addresses both optimization and execution reliability: prefix-preserving sampling retains verified progress and atomic-turn credit assignment localizes learning signals, while MegaMCP maintains isolated, recoverable state across concurrent rollouts over shared tool services. Extensive experiments across various models and benchmarks demonstrate the effectiveness of WEFT for tool-use post-training. WEFT-8B and WEFT-14B outperform all evaluated matched-size environment-scaling baselines on BFCL V4, τ^2-Bench, and Claw-Eval. In particular, WEFT-14B improves over Agent-World-14B by 6.41, 2.23, and 12.27 percentage points. WEFT-35B-A3B further extends these gains to more challenging long-horizon workflow benchmarks, including Toolathlon-Verified and AutomationBench.

nex-agi Nex AGI
·
Sep 28 2

Turn: A Language for Agentic Computation

We present Turn, a compiled, actor-based programming language -- statically typed for schema inference, dynamically typed at the value level -- for agentic software: programs that reason and act autonomously by delegating inference to large language models (LLMs). Existing approaches augment general-purpose languages with frameworks, encoding critical invariants (bounded context, typed inference output, credential isolation, durable state) as application-level conventions rather than language guarantees. Turn introduces five language-level constructs that address this gap. Cognitive Type Safety makes LLM inference a typed primitive: the compiler generates a JSON Schema from a struct definition and the VM validates model output before binding. The confidence operator enables deterministic control flow gated on model certainty. Turn's actor-based process model, derived from Erlang, gives each agent an isolated context window, persistent memory, and mailbox. A capability-based identity system returns opaque, unforgeable handles from the VM host, ensuring raw credentials never enter agent memory. Finally, compile-time schema absorption (use schema::<protocol>) synthesizes typed API bindings from external specifications at compile time; the openapi adapter is shipped with graphql, fhir, and mcp in active development. We describe the language design, type rules, schema semantics, and a Rust-based bytecode VM, and evaluate Turn against representative agentic workloads. Turn is open source at https://github.com/ekizito96/Turn.

  • 1 authors
·
Mar 7

MOD-X: A Modular Open Decentralized eXchange Framework proposal for Heterogeneous Interoperable Artificial Agents

As Artificial Intelligence systems evolve from monolithic models to ecosystems of specialized agents, the need for standardized communication protocols becomes increasingly critical. This paper introduces MOD-X (Modular Open Decentralized eXchange), a novel architectural framework proposal for agent interoperability that addresses key limitations of existing protocols. Unlike current approaches, MOD-X proposes a layered architecture with a Universal Message Bus, thorough state management, translation capabilities, and blockchain-based security mechanisms. We present MOD-X's architecture, compare it with existing protocols, and demonstrate its application through a worked example how it enables integration between heterogeneous specialist agents (agents with different architectures, vendors, capabilities, and knowledge representations--including rule-based systems, neural networks, symbolic reasoning engines, and legacy software with agent wrappers). MOD-X's key innovations include a publish-subscribe communication model, semantic capability discovery, and dynamic workflow orchestration--providing a framework that bridges theoretical formalism with practical implementation. This architecture addresses the growing need for truly decentralized, interoperable agent ecosystems that can scale effectively without the need for central coordination.

  • 5 authors
·
Jul 6, 2025 1

PULSE: An Executable Contract Language for Spatiotemporal Knowledge Graph Engineering

Knowledge graph engineering often distributes accepted state, observations, constraints, processes, and hypothetical scenarios across artifacts whose combined execution contract remains external. We present PULSE, an Object-Process-Methodology-inspired language that localizes four operational roles and their write effects in one typed runtime. Here, modes denote operational roles rather than modal or deontic logic. The implemented contract fixes evidence non-overwrite, branch isolation, grounded multi-subject timers, guarded state change, and declaration-ranked event ordering over time and space; an external runner still decides whether evidence becomes an authoritative move. GeoSPARQL, SOSA, and SHACL remain generated views. A core calculus gives an effect-confinement lemma and six safety properties. Lean 4 checks kernel analogues for positions, evidence, clocks, monitors, atomicity, and branch source retention; 88 tests, 3,534 bounded checks, and 32 Lean/Python runtime-kernel cases bound the implementation claim to the checked cases. First-author implementations of a standards composition and a separate Sismic statechart reproduce the tested cold-chain trace. Across 37,440 generated temporal traces, PULSE matches a separate workflow and distinguishes ten single-field mutants. On the complete NOAA IBTrACS since1980 subset it agrees with GEOS and an event sweep on 1,476,290 transition-zone pairs, including 4,800 sampled and 12,831 duration-qualified events. Project-specific GeoSPARQL probes measure interface coverage. Overall, the results support contract localization, safety arguments, and trace parity for the tested fragment; language superiority and usability remain outside the evaluation.

  • 2 authors
·
Jul 25

Reliable and Efficient In-Memory Fault Tolerance of Large Language Model Pretraining

Extensive system scales (i.e. thousands of GPU/TPUs) and prolonged training periods (i.e. months of pretraining) significantly escalate the probability of failures when training large language models (LLMs). Thus, efficient and reliable fault-tolerance methods are in urgent need. Checkpointing is the primary fault-tolerance method to periodically save parameter snapshots from GPU memory to disks via CPU memory. In this paper, we identify the frequency of existing checkpoint-based fault-tolerance being significantly limited by the storage I/O overheads, which results in hefty re-training costs on restarting from the nearest checkpoint. In response to this gap, we introduce an in-memory fault-tolerance framework for large-scale LLM pretraining. The framework boosts the efficiency and reliability of fault tolerance from three aspects: (1) Reduced Data Transfer and I/O: By asynchronously caching parameters, i.e., sharded model parameters, optimizer states, and RNG states, to CPU volatile memory, Our framework significantly reduces communication costs and bypasses checkpoint I/O. (2) Enhanced System Reliability: Our framework enhances parameter protection with a two-layer hierarchy: snapshot management processes (SMPs) safeguard against software failures, together with Erasure Coding (EC) protecting against node failures. This double-layered protection greatly improves the survival probability of the parameters compared to existing checkpointing methods. (3) Improved Snapshotting Frequency: Our framework achieves more frequent snapshotting compared with asynchronous checkpointing optimizations under the same saving time budget, which improves the fault tolerance efficiency. Empirical results demonstrate that Our framework minimizes the overhead of fault tolerance of LLM pretraining by effectively leveraging redundant CPU resources.

  • 10 authors
·
Oct 19, 2023

Prime Collective Communications Library -- Technical Report

This report presents the Prime Collective Communications Library (PCCL), a novel fault-tolerant collective communication library designed for distributed ML workloads over the public internet. PCCL introduces a new programming model that enables dynamic peer joining and failure recovery. The library implements efficient collective operations like all-reduce while providing robust fault tolerance mechanisms that allow the system to continue operating even when peers fail or join during ongoing operations. We demonstrate that PCCL's design enables practical solutions to dynamic membership challenges in workloads with repeated operations and deterministic state advancement. Our implementation passes extensive stress tests across all major operating systems, showing reliable operation even under rapid peer churn and concurrent collective operations. By dispatching to multiple connections, we can efficiently utilize cross-continental long-fat-pipe TCP WAN links, in our experiments achieving up to 45 Gbit/s of bandwidth utilization across Europe and 25 Gbit/s across North America and Europe. PCCL's architecture enables easy implementation of distributed low-communication optimization strategies like DiLoCo, which significantly reduce communication frequency. Combined with quantization, this leads to a significant reduction in the bandwidth required for distributed training workloads. PCCL also allows for concurrent collective operations, which enables optimization strategies like async DiLoCo, which can completely hide communication overhead by implementing one-step delayed parameter updates. PCCL can facilitate exact bit-parity of the shared state across peers in all cases induced by graceful or abrupt peer churn. While PCCL exposes a C99 API, Python bindings are available which are compatible with PyTorch alongside FSDP. PCCL is available under the open source MIT license.

  • 5 authors
·
May 20, 2025

Verified Detection and Prevention of Concurrency Anomalies in Multi-Agent Large Language Model Systems

Multi-agent LLM systems share state through memory stores, vector indices, and tool registries. We model such sharing as long-running read-generate-write operations under deterministic-generation semantics -- the regime durable-execution engines enforce by deterministic replay -- and formalize four concurrency anomalies in TLA+: stale-generation, phantom-tool, causal-cascade, and tool-effect reordering, structural analogues of classical isolation anomalies, each with a TLC counter-example. The exclusion lattice over these anomalies is trivial; the contribution is the mechanically verified realizability and strict separation of one maximal chain within it, L_0 subsetneq cdots subsetneq L_4, to our knowledge the first machine-checked consistency hierarchy for such runtimes. A development of 274 Verus obligations (zero assume, zero admit; trust base: two structural axioms and a mutex correspondence) proves the detectors sound and complete against the specifications and each runtime its avoidance set. Three deployed Rust runtimes realize L0-L1 (pessimistic locking, serializable snapshot isolation, default-SI), each verified against stale-generation and refined to its state machine; L2-L4 are exec-mode-verified with dependency-free prevention twins (A3, A6, A2: 0/1000 versus 1000/1000), and L2 is run live across three model families (A3 prevented in all 120 retracted sessions). We reproduce a silent lost update in ByteDance's deer-flow, formalizing its fix as a verified L_0 to L_1 refinement, and exhibit tool-effect reordering in LangGraph's ToolNode on unmodified output, removed by an L3 commit-order sequencer. The verified detector, refinements, and realizability artifacts are the contribution; the phenomena and lattice are classical.

  • 1 authors
·
Jun 14 1