new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 20

The FAST HI 21-cm absorption blind survey. II. -- Statistic Exploration for Associated and Intervening systems

We present an extragalactic HI 21-cm absorption lines catalog from a blind search at z leqslant 0.35, using drift-scan data collected in 1325.6 hours by the ongoing Commensal Radio Astronomy FasT Survey (CRAFTS) and FAST All Sky HI Survey (FASHI), which spans a sky area of 6072.0 deg^{2} and covers 84533 radio sources with a flux density greater than 12 mJy. 14 previously identified HI absorbers and 20 newly discovered HI absorbers were detected, comprising 15 associated systems, 10 intervening systems, and 9 systems with undetermined classifications. Through spectral stacking, the mean peak optical path, mean velocity-integrated optical path, mean FWHM and mean HI column density are measured to be 0.47 and 0.30; 27.19 and 4.36 km s^{-1}; 42.61 and 9.33 km s^{-1}; 0.49 and 0.08 T_{s} times 10^{20}cm^{-2}K^{-1}, for the associated and intervening samples, respectively. Statistical analysis also reveals that associated systems tend to be hosted by red (g-r>0.7) galaxies at lower redshifts, whereas galaxies hosting intervening HI absorption are typically found at higher redshifts and are of a bluer (g-rleqslant0.7) type. A noticeable difference is observed in the positions of foregrounds, backgrounds of intervening systems, and high-redshift and low-redshift associated systems on the WISE color-color diagram. All identified foreground sources in our sample have W1-W2 magnitudes below 0.8, suggesting no Active Galactic Nuclei (AGN). In contrast, backgrounds of intervening systems tend to have W1-W2 magnitudes above 0.8, indicating AGN presence. For associated absorption, most low-redshift (zleqslant0.5) systems show W1-W2 values below 0.8, while higher-redshift associated absorption (z>0.5) displays a broader range of W1-W2 values.

  • 15 authors
·
Jul 19, 2024

Logics-Parsing Technical Report

Recent advances in Large Vision-Language models (LVLM) have spurred significant progress in document parsing task. Compared to traditional pipeline-based methods, end-to-end paradigms have shown their excellence in converting PDF images into structured outputs through integrated Optical Character Recognition (OCR), table recognition, mathematical formula recognition and so on. However, the absence of explicit analytical stages for document layouts and reading orders limits the LVLM's capability in handling complex document types such as multi-column newspapers or posters. To address this limitation, we propose in this report Logics-Parsing: an end-to-end LVLM-based model augmented with reinforcement learning. Our model incorporates meticulously designed reward mechanisms to optimize complex layout analysis and reading order inference. In addition, we expand the model's versatility by incorporating diverse data types such as chemical formulas and handwritten Chinese characters into supervised fine-tuning. Finally, to enable rigorous evaluation of our approach, we introduce LogicsParsingBench, a curated set of 1,078 page-level PDF images spanning nine major categories and over twenty sub-categories, which will be released later. Comprehensive experiments conducted on LogicsParsingBench have validated the efficacy and State-of-the-art (SOTA) performance of our proposed model across diverse document analysis scenarios. Project Page: https://github.com/alibaba/Logics-Parsing

  • 10 authors
·
Sep 24, 2025 2

Programmable Integrated Magnonic Meshes

Integrated circuits are a cornerstone of modern information technology, and analog wave-based architectures could enable fast and efficient processing beyond conventional charge electronics. In magnonics, spin waves provide a highly tunable, compact and energy-efficient medium for on-chip microwave signal transport and processing. However, progress has been limited to isolated elements or short devices, severely limiting the overall functional complexity and scalability. Here we realize the key elements of universal magnonic circuitry, using a single-step direct laser writing process in yttrium iron garnet, and monolithically cascade them in multi-stage programmable devices and networks. Using magneto-optical Kerr effect microscopy, we show efficient spin-wave propagation and preserved phase coherence in waveguide structures for hundreds of wavelengths. In coupled waveguides, we observe complete and periodic power transfer over several coupling lengths, and in phase shifters we achieve arbitrary, tunable phase delays. By cascading these elements, we realize programmable splitters, frequency demultiplexers, and phase-controlled 2x2 routers, where output power and relative phase can be programmed on demand via external fields. Finally, we realize programmable magnonic interferometric meshes for on-chip radio-frequency signal routing, with up to six magnonic inputs and outputs and seven cascaded stages, without the need for intermediate amplification. These direct-write cascaded networks bridge a long-standing gap in magnonic scalability, offering a viable pathway toward integrated, large-scale architectures for both classical and quantum processing.

  • 12 authors
·
Apr 29

Searching for Materials with High Refractive Index and Wide Band Gap: A First-Principles High-Throughput Study

Materials combining both a high refractive index and a wide band gap are of great interest for optoelectronic and sensor applications. However, these two properties are typically described by an inverse correlation with high refractive index appearing in small gap materials and vice-versa. Here, we conduct a first-principles high-throughput study on more than 4000 semiconductors (with a special focus on oxides). Our data confirm the general inverse trend between refractive index and band gap but interesting outliers are also identified. The data are then analyzed through a simple model involving two main descriptors: the average optical gap and the effective frequency. The former can be determined directly from the electronic structure of the compounds, but the latter cannot. This calls for further analysis in order to obtain a predictive model. Nonetheless, it turns out that the negative effect of a large band gap on the refractive index can counterbalanced in two ways: (i) by limiting the difference between the direct band gap and the average optical gap which can be realized by a narrow distribution in energy of the optical transitions and (ii) by increasing the effective frequency which can be achieved through either a high number of transitions from the top of the valence band to the bottom of the conduction or a high average probability for these transitions. Focusing on oxides, we use our data to investigate how the chemistry influences this inverse relationship and rationalize why certain classes of materials would perform better. Our findings can be used to search for new compounds in many optical applications both in the linear and non-linear regime (waveguides, optical modulators, laser, frequency converter, etc.).

  • 6 authors
·
Sep 4, 2018

The Role of AI in Early Detection of Life-Threatening Diseases: A Retinal Imaging Perspective

Retinal imaging has emerged as a powerful, non-invasive modality for detecting and quantifying biomarkers of systemic diseases-ranging from diabetes and hypertension to Alzheimer's disease and cardiovascular disorders but current insights remain dispersed across platforms and specialties. Recent technological advances in optical coherence tomography (OCT/OCTA) and adaptive optics (AO) now deliver ultra-high-resolution scans (down to 5 {\mu}m ) with superior contrast and spatial integration, allowing early identification of microvascular abnormalities and neurodegenerative changes. At the same time, AI-driven and machine learning (ML) algorithms have revolutionized the analysis of large-scale retinal datasets, increasing sensitivity and specificity; for example, deep learning models achieve > 90 \% sensitivity for diabetic retinopathy and AUC = 0.89 for the prediction of cardiovascular risk from fundus photographs. The proliferation of mobile health technologies and telemedicine platforms further extends access, reduces costs, and facilitates community-based screening and longitudinal monitoring. Despite these breakthroughs, translation into routine practice is hindered by heterogeneous imaging protocols, limited external validation of AI models, and integration challenges within clinical workflows. In this review, we systematically synthesize the latest OCT/OCT and AO developments, AI/ML approaches, and mHealth/Tele-ophthalmology initiatives and quantify their diagnostic performance across disease domains. Finally, we propose a roadmap for multicenter protocol standardization, prospective validation trials, and seamless incorporation of retinal screening into primary and specialty care pathways-paving the way for precision prevention, early intervention, and ongoing treatment of life-threatening systemic diseases.

  • 3 authors
·
May 27, 2025

MDTransformer: A Hardware-Software Co-Design of Mode-Division Photonic Transformer Accelerator with Inverse-Designed Coherent Crossbar

Recently, photonic transformer accelerators (PTAs) have successfully achieved significant speedup and energy efficiency improvements over electronic accelerators for expediting Transformer inference. However, state-of-the-art rely on expensive multi-wavelength light generation and large dot-product units due to active phase-shifter components, thus making their approach inefficient and impractical. To address this, we propose MDTransformer, a novel hardware-software co-design of PTA based on mode-division optical dataflow and operations. Specifically, MDTransformer performs complex matrix operations using spatial-mode interference, that leverages the inverse-designed multi-mode couplers, crossings, and Mach-Zehnder IQ modulators into a compact mode-division photonic tensor core (MPTC), capable of executing matrix multiplications in the optical domain. Its each guided mode (i.e., TE0-TE3) acts as an independent computational lane, enabling four-fold parallelism-per-waveguide without spectral filtering or free-spectral-range limitations. Moreover, its coherent detection and IQ modulation jointly encode amplitude and phase, realizing complex-valued arithmetic for full-range operations in transformers. MDTransformer offers analog multiplication with sub-4-bit effective precision and inter-modal crosstalk below -30 dB. Its inverse-designed approach also offers scalable and full compatibility with single-laser continuous-wave operation at 1550 nm. Experimental results show that MDTransformer achieves 40.4% area reduction, 63.6% power saving, 40.6% energy saving, and comparable latency over the state-of-the-art PTA across different workloads (i.e., DeiT-Tiny/Small/Base and BERT-Base/Large). These results show that MDTransformer offers a practical solution for high-performance and energy-efficient transformer-based systems.

  • 5 authors
·
Jul 27

Interferometer response characterization algorithm for multi-aperture Fabry-Perot imaging spectrometers

In recent years, the demand for hyperspectral imaging devices has grown significantly, driven by their ability of capturing high-resolution spectral information. Among the several possible optical designs for acquiring hyperspectral images, there is a growing interest in interferometric spectral imaging systems based on division of aperture. These systems have the advantage of capturing snapshot acquisitions while maintaining a compact design. However, they require a careful calibration to operate properly. In this work, we present the interferometer response characterization algorithm (IRCA), a robust three-step procedure designed to characterize the transmittance response of multi-aperture imaging spectrometers based on the interferometry of Fabry-Perot. Additionally, we propose a formulation of the image formation model for such devices suitable to estimate the parameters of interest by considering the model under various regimes of finesse. The proposed algorithm processes the image output obtained from a set of monochromatic light sources and refines the results using nonlinear regression after an ad-hoc initialization. Through experimental analysis conducted on four different prototypes from the Image SPectrometer On Chip (ImSPOC) family, we validate the performance of our approach for characterization. The associated source code for this paper is available at https://github.com/danaroth83/irca.

  • 5 authors
·
Mar 24, 2023

Outdoor-to-Indoor 28 GHz Wireless Measurements in Manhattan: Path Loss, Environmental Effects, and 90% Coverage

Outdoor-to-indoor (OtI) signal propagation further challenges the already tight link budgets at millimeter-wave (mmWave). To gain insight into OtI mmWave scenarios at 28 GHz, we conducted an extensive measurement campaign consisting of over 2,200 link measurements. In total, 43 OtI scenarios were measured in West Harlem, New York City, covering seven highly diverse buildings. The measured OtI path gain can vary by up to 40 dB for a given link distance, and the empirical path gain model for all data shows an average of 30 dB excess loss over free space at distances beyond 50 m, with an RMS fitting error of 11.7 dB. The type of glass is found to be the single dominant feature for OtI loss, with 20 dB observed difference between empirical path gain models for scenarios with low-loss and high-loss glass. The presence of scaffolding, tree foliage, or elevated subway tracks, as well as difference in floor height are each found to have an impact between 5-10 dB. We show that for urban buildings with high-loss glass, OtI coverage can support 500 Mbps for 90% of indoor user equipment (UEs) with a base station (BS) antenna placed up to 49 m away. For buildings with low-loss glass, such as our case study covering multiple classrooms of a public school, data rates over 2.5/1.2 Gbps are possible from a BS 68/175 m away from the school building, when a line-of-sight path is available. We expect these results to be useful for the deployment of mmWave networks in dense urban environments as well as the development of relevant scheduling and beam management algorithms.

  • 15 authors
·
May 19, 2022

Weighted Sum Rate Optimization for Movable Antenna Enabled Near-Field ISAC

Integrated sensing and communication (ISAC) has been recognized as one of the key technologies capable of simultaneously improving communication and sensing services in future wireless networks. Moreover, the introduction of recently developed movable antennas (MAs) has the potential to further increase the performance gains of ISAC systems. Achieving these gains can pose a significant challenge for MA-enabled ISAC systems operating in the near-field due to the corresponding spherical wave propagation. Motivated by this, in this paper we maximize the weighted sum rate (WSR) for communication users while maintaining a minimal sensing requirement in an MA-enabled near-field ISAC system. To achieve this goal, we propose an algorithm that optimizes the sensing receive combiner, the communication precoding matrices, the sensing transmit beamformer and the positions of the users' MAs in an alternating manner. Simulation results show that using MAs in near-field ISAC systems provides a substantial performance advantage compared to near-field ISAC systems with only fixed antennas. Additionally, we demonstrate that the highest WSR is obtained when larger weights are allocated to the users placed closer to the BS, and that the sensing performance is significantly more affected by the minimum sensing signal-to-interference-plus-noise ratio (SINR) threshold compared to the communication performance.

  • 4 authors
·
Oct 22, 2025

PCFBench: How Far Can Large Vision-Language Models Go in Physics-aware Photonic Inverse Design?

Photonic crystal fibers (PCFs) underpin critical applications in telecommunications, sensing, and high-power laser delivery, yet their design remains a manual, expert-intensive process that couples geometric intuition with deep waveguide physics. Vision-language models (VLMs) offer a promising path toward automating PCF design, but can they truly reason about photonic physics from microscopy images, or do they merely recognize visual patterns? We introduce PCFBench, the first comprehensive benchmark for evaluating VLMs on the perception, reasoning, and decision steps of the photonic inverse-design loop. PCFBench spans 26 tasks organized into six categories of increasing cognitive demand (Geometry Perception, Physics Understanding, Text Generation, Multi-modal Reasoning, Inverse-Design Decision, and Code Generation), built from over 220K FDTD simulation samples across 18 structurally diverse fiber families. We evaluate both individual VLMs on isolated tasks and multi-agent systems (MAS) on the full sequential pipeline from perception to design. Our results reveal a striking perception-design gap: current models can identify fiber geometry with moderate success, yet consistently fail to translate that visual understanding into physics-aware design actions. Moreover, cascading agents through the pipeline exposes significant error propagation, where upstream perception mistakes compound into downstream design failures. These findings suggest that neither model scaling nor naive agent chaining suffices, and that closing the loop demands explicit physical grounding. PCFBench provides the community with a rigorous, multi-dimensional testbed to measure progress toward AI-assisted photonic engineering. The project is available at https://pcfbench.github.io/.

  • 3 authors
·
Oct 22

Joint Discrete-Continuous Flow Matching for Open-Vocabulary Inverse Design of Multilayer Optical Coatings

Amortized neural inverse design typically remains closed-world: component choices are fixed vocabulary tokens, coordinate grids are frozen at training time, and continuous variables are discretized into sequence tokens. Multilayer optical coatings are an industrially important instance, coupling material sequence, layer thickness and wavelength-dependent response. We present IrisFlow, a query-based, open-vocabulary flow-matching framework instantiated in coatings: the target reflectance/transmittance spectrum, wavelength grid, candidate-material optical constants and layer count are supplied at query time. Candidate materials enter as wavelength-aware optical tokens rather than learned identities; material sequences are sampled by discrete flow matching over the query's candidate bank, thicknesses by continuous flow matching without discretization. A single 136M-parameter model designs 2-100-layer stacks. Across a 224-task benchmark it reconstructs in-distribution targets faithfully and retains same-order accuracy on a 15-material held-out bank without retraining; it reconstructs bands up to 1100 nm beyond its training envelope, designs against analytic application specifications and outperforms an autoregressive baseline on that baseline's material library. With optical constants calibrated to our deposition process, IrisFlow designs four color-displaying coolers, fabricated by ion-assisted evaporation: the three chromatic devices reach a CIEDE2000 color error of 3.1-5.2 while retaining 93-95% solar near-infrared reflectance, demonstrating open-vocabulary design carried through to fabricated coatings.

  • 6 authors
·
Jul 8

Forward-Forward Training of an Optical Neural Network

Neural networks (NN) have demonstrated remarkable capabilities in various tasks, but their computation-intensive nature demands faster and more energy-efficient hardware implementations. Optics-based platforms, using technologies such as silicon photonics and spatial light modulators, offer promising avenues for achieving this goal. However, training multiple trainable layers in tandem with these physical systems poses challenges, as they are difficult to fully characterize and describe with differentiable functions, hindering the use of error backpropagation algorithm. The recently introduced Forward-Forward Algorithm (FFA) eliminates the need for perfect characterization of the learning system and shows promise for efficient training with large numbers of programmable parameters. The FFA does not require backpropagating an error signal to update the weights, rather the weights are updated by only sending information in one direction. The local loss function for each set of trainable weights enables low-power analog hardware implementations without resorting to metaheuristic algorithms or reinforcement learning. In this paper, we present an experiment utilizing multimode nonlinear wave propagation in an optical fiber demonstrating the feasibility of the FFA approach using an optical system. The results show that incorporating optical transforms in multilayer NN architectures trained with the FFA, can lead to performance improvements, even with a relatively small number of trainable weights. The proposed method offers a new path to the challenge of training optical NNs and provides insights into leveraging physical transformations for enhancing NN performance.

  • 9 authors
·
Aug 9, 2023

Global Inverse Design Across Multiple Photonic Structure Classes Using Generative Deep Learning

Understanding how nano- or micro-scale structures and material properties can be optimally configured to attain specific functionalities remains a fundamental challenge. Photonic metasurfaces, for instance, can be spectrally tuned through material choice and structural geometry to achieve unique optical responses. However, existing numerical design methods require prior identification of specific material-structure combinations, or device classes, as the starting point for optimization. As such, a unified solution that simultaneously optimizes across materials and geometries has yet to be realized. To overcome these challenges, we present a global deep learning-based inverse design framework, where a conditional deep convolutional generative adversarial network is trained on colored images encoded with a range of material and structural parameters, including refractive index, plasma frequency, and geometric design. We demonstrate that, in response to target absorption spectra, the network can identify an effective metasurface in terms of its class, materials properties, and overall shape. Furthermore, the model can arrive at multiple design variants with distinct materials and structures that present nearly identical absorption spectra. Our proposed framework is thus an important step towards global photonics and materials design strategies that can identify combinations of device categories, material properties, and geometric parameters which algorithmically deliver a sought functionality.

  • 9 authors
·
Dec 31, 2020

Space-time tradeoffs of lenses and optics via higher category theory

Optics and lenses are abstract categorical gadgets that model systems with bidirectional data flow. In this paper we observe that the denotational definition of optics - identifying two optics as equivalent by observing their behaviour from the outside - is not suitable for operational, software oriented approaches where optics are not merely observed, but built with their internal setups in mind. We identify operational differences between denotationally isomorphic categories of cartesian optics and lenses: their different composition rule and corresponding space-time tradeoffs, positioning them at two opposite ends of a spectrum. With these motivations we lift the existing categorical constructions and their relationships to the 2-categorical level, showing that the relevant operational concerns become visible. We define the 2-category 2-Optic(C) whose 2-cells explicitly track optics' internal configuration. We show that the 1-category Optic(C) arises by locally quotienting out the connected components of this 2-category. We show that the embedding of lenses into cartesian optics gets weakened from a functor to an oplax functor whose oplaxator now detects the different composition rule. We determine the difficulties in showing this functor forms a part of an adjunction in any of the standard 2-categories. We establish a conjecture that the well-known isomorphism between cartesian lenses and optics arises out of the lax 2-adjunction between their double-categorical counterparts. In addition to presenting new research, this paper is also meant to be an accessible introduction to the topic.

  • 1 authors
·
Sep 19, 2022

On the Sensing Performance of OFDM-based ISAC under the Influence of Oscillator Phase Noise

Integrated sensing and communication (ISAC) is a novel capability expected for sixth generation (6G) cellular networks. To that end, several challenges must be addressed to enable both mono- and bistatic sensing in existing deployments. A common impairment in both architectures is oscillator phase noise (PN), which not only degrades communication performance, but also severely impairs radar sensing. To enable a broader understanding of orthogonal-frequency division multiplexing (OFDM)-based sensing impaired by PN, this article presents an analysis of sensing peformance in OFDM-based ISAC for different waveform parameter choices and settings in both mono- and bistatic architectures. In this context, the distortion of the adopted digital constellation modulation is analyzed and the resulting PN-induced effects in range-Doppler radar images are investigated both without and with PN compensation. These effects include peak power loss of target reflections and higher sidelobe levels, especially in the Doppler shift direction. In the conducted analysis, these effects are measured by the peak power loss ratio, peak-to-sidelobe level ratio, and integrated sidelobe level ratio parameters, the two latter being evaluated in both range and Doppler shift directions. In addition, the signal-to-interference ratio is analyzed to allow not only quantifying the distortion of a target reflection, but also measuring the interference floor level in a radar image. The achieved results allow to quantify not only the PN-induced impairments to a single target, but also how the induced degradation may impair the sensing performance of OFDM-based ISAC systems in multi-target scenarios.

  • 6 authors
·
Oct 17, 2024

Thermal Holography with Nonlocal Metasurfaces

Thermal radiation and luminescence are among the most ubiquitous sources of light, yet their properties are difficult to engineer due to their incoherent nature. Recent advances in thermal emission control have endowed heat-generated light with spatial and temporal coherence, as well as control over its polarization, by judiciously patterning periodic arrays of nanostructures. However, custom wavefront engineering of incoherent light has remained an open challenge, as it requires not only sufficient spatial and temporal coherence but also arbitrary local phase control, which experimentally translates into sustaining long-range lattice resonances in aperiodic systems while maintaining their robustness against local phase perturbations. In this work, we address this longstanding limitation and demonstrate programmable vectorial control over the thermal emission wavefront from single-layer aperiodic nonlocal metasurfaces, realized by manipulating local geometric phases across a collective delocalized resonance. We exemplify the wavefront-shaping capabilities of our approach by demonstrating thermal beam steering, spin-momentum-locked thermal focusing and the generation of a thermal vectorial hologram, providing custom spatial and spectral control over thermal light. Our platform addresses challenges in thermal emission engineering and provides a route for light generation and control without the need for external coherent sources or bulky setups. Future work may extend this design principle to other incoherent emission systems, such as photo- and electroluminescence.

  • 10 authors
·
Oct 6

Multiple Access in Pinching-Antenna Systems: A Survey, Impairment Analysis, and Evaluation

Pinching-antenna systems attach dielectric pinches to a waveguide, creating line-of-sight radiation points within a few meters of any user. The pinches on one waveguide, however, radiate the same signal, unlike a conventional array, where each element transmits a dedicated signal. Separating the signals of multiple users therefore becomes challenging and requires a new perspective on multiple access. Most existing studies rest on an idealized model, and no survey examines the access schemes under realistic impairments. This article surveys multiple access in pinching-antenna systems and organizes fifty-six works into a unified taxonomy by spatial degrees of freedom. The users of one waveguide can be separated only in time, frequency, power, or guided mode, while multiple waveguides add the space domain. The article then identifies the impairments critical to this separation, which perturb the effective channel, leak interference across orthogonal resources, or couple the pinches on the uplink, and summarizes them in an impairment-versus-method map. A unified evaluation of time-, frequency-, power-, and space-domain access under identical channel and impairment models reveals that the degradation is method specific. The analytical and numerical results give insight into multiple access in these systems and provide a basis for its impairment-aware design, a necessary step toward their adoption in practical networks.

  • 2 authors
·
Oct 1

PLAIN: Scalable Estimation Architecture for Integrated Sensing and Communication

Integrated sensing and communication (ISAC) is envisioned be to one of the paradigms upon which next-generation mobile networks will be built, extending localization and tracking capabilities, as well as giving birth to environment-aware wireless access. A key aspect of sensing integration is parameter estimation, which involves extracting information about the surrounding environment, such as the direction, distance, and velocity of various objects within. This is typically of a high-dimensional nature, which leads to significant computational complexity, if performed jointly across multiple sensing dimensions, such as space, frequency, and time. Additionally, due to the incorporation of sensing on top of the data transmission, the time window available for sensing is likely to be short, resulting in an estimation problem where only a single snapshot is accessible. In this work, we propose PLAIN, a tensor-based estimation architecture that flexibly scales with multiple sensing dimensions and can handle high dimensionality, limited measurement time, and super-resolution requirements. It consists of three stages: a compression stage, where the high dimensional input is converted into lower dimensionality, without sacrificing resolution; a decoupled estimation stage, where the parameters across the different dimensions are estimated in parallel with low complexity; an input-based fusion stage, where the decoupled parameters are fused together to form a paired multidimensional estimate. We investigate the performance of the architecture for different configurations and compare it against practical sequential and joint estimation baselines, as well as theoretical bounds. Our results show that PLAIN, using tools from tensor algebra, subspace-based processing, and compressed sensing, can scale flexibly with dimensionality, while operating with low complexity and maintaining super-resolution.

  • 3 authors
·
Mar 27, 2025

Fundamental CRB-Rate Tradeoff of Rydberg Atomic Receivers for Integrated Sensing and Communication

Integrated sensing and communication (ISAC) is a key technology for next generation wireless networks, requiring highly sensitive, compact receiver front ends with multiband coverage. Rydberg atomic receivers (RARs) provide a promising architecture that satisfies these requirements owing to their high sensitivity and continuous frequency tuning capability. Unlike in classical ISAC systems utilizing orthogonal resource allocation, executing concurrent multi band tasks within a single atomic ensemble relies on shared energy state transitions. Owing to this shared structure, the communication and sensing tradeoff in RAR-based ISAC introduces an atomic-response tradeoff beyond the classical subspace and deterministic-random tradeoffs. This paper studies a multi-branch RAR (MB-RAR) architecture for joint communication and radar sensing. By solving the five level Lindblad master equation at the local oscillator (LO) biased operating point and linearizing the communication and sensing radio frequency (RF) signals as small perturbations, we obtain the double-sideband dynamic signal response of the MB-RAR. The model reveals two intrinsic constraints. First, increasing the coupling laser strength broadens the response bandwidth but can weaken the atomic response. Second, strengthening one branch's LO can suppress the other branch's conversion gain through the shared Rydberg state, even when the latter's LO bias remains fixed, which is termed the inter band gain inhibition (IBGI). Based on these mechanisms, we formulate the achievable Cramér--Rao bound (CRB)-rate region and develop a rate-constrained joint search over coupling strength and LO power allocation. Numerical results validate the proposed response model and show that joint optimization provides a more complete characterization of the achievable CRB-rate region.

  • 5 authors
·
Oct 5

Absence of universal backscattering immunity in reciprocal photonic waveguides

Suppressing parasitic back-reflection caused by imperfections, such as random defects, material inhomogeneities, localized inclusions, and fabrication-induced geometric deviations, has long been a central objective in optical-waveguide engineering. In this Letter, we theoretically establish that universal immunity to backscattering from arbitrary disorder is fundamentally impossible in reciprocal optical waveguides, irrespective of whether the underlying structure is topologically trivial or nontrivial.We establish this result through two complementary constructions of physically admissible reciprocal perturbations. The first considers weak permittivity perturbations of finite spatial extent within the first Born approximation, whereas the second considers optically small dielectric perturbations of finite contrast. In each construction, an admissible realization exists that produces a nonzero leading-order backward-scattering amplitude. We trace the fundamental origin of this limitation to the absence in photons of the intrinsic spin-1{2} and fermionic time-reversal structure underlying Kramers protection in electronic systems. Consequently, any mechanism that enforces photonic backscattering suppression throughout a prescribed class of disorder must instead be engineered into the underlying electromagnetic structure and its constitutive response, which can itself be modified by generic reciprocal perturbations. Numerical examples in representative reciprocal topological waveguides further illustrate these limitations for random defects and sharp bends. We further identify several constructive strategies for suppressing back-reflection within certain prescribed classes of disorder.

  • 9 authors
·
Oct 1

Polarization aberrations in next-generation Giant Segmented Mirror Telescopes (GSMTs). II. Influence of segment-to-segment coating variations on high-contrast imaging and polarimetry

Direct exo-Earth imaging is a key science goal for astronomy in the next decade. This ambitious task imposes a target contrast of ~10^-7 at wavelengths from I to J-band. In our prior study, we determined that polarization aberrations can limit the achievable contrast to 10^-5 to 10^-6 in the infrared. However, these results assumed a perfect coronagraph coupled to a telescope with an ideal coating on each of the mirrors. In this study we seek to understand the influence of polarization aberrations from segment-to-segment coating variations on coronagraphy and polarimetry. We use the Poke open-source polarization ray tracing package to compute the Jones pupil of each GSMT with spatially-varying coatings applied to the segments. The influence of the resultant polarization aberrations is simulated by propagating the Jones pupil through physical optics models of coronagraphs using HCIPy. After applying wavefront control from an ideal adaptive optics system, we determine that the segment-to-segment variations applied limit the performance of coronagraphy to a raw contrast of approximately 10^-8 in I-band, which is 2-3 orders of magnitude lower the target performance for high-contrast imaging systems on the ground. This is a negligible addition to the nominal polarization aberrations for ground-based systems. We further observe negligible degradation in polarimetric imaging of debris disks from segment-to-segment aberrations above and beyond the impact of nominal polarization aberration.

  • 11 authors
·
Jan 7, 2025

OPTIAGENT: A Physics-Driven Agentic Framework for Automated Optical Design

Optical design is the process of configuring optical elements to precisely manipulate light for high-fidelity imaging. It is inherently a highly non-convex optimization problem that relies heavily on human heuristic expertise and domain-specific knowledge. While Large Language Models (LLMs) possess extensive optical knowledge, their capabilities in leveraging the knowledge in designing lens system remain significantly constrained. This work represents the first attempt to employ LLMs in the field of optical design. We bridge the expertise gap by enabling users without formal optical training to successfully develop functional lens systems. Concretely, we curate a comprehensive dataset, named OptiDesignQA, which encompasses both classical lens systems sourced from standard optical textbooks and novel configurations generated by automated design algorithms for training and evaluation. Furthermore, we inject domain-specific optical expertise into the LLM through a hybrid objective of full-system synthesis and lens completion. To align the model with optical principles, we employ Group Relative Policy Optimization Done Right (DrGRPO) guided by Optical Lexicographic Reward for physics-driven policy alignment. This reward system incorporates structural format rewards, physical feasibility rewards, light-manipulation accuracy, and LLM-based heuristics. Finally, our model integrates with specialized optical optimization routines for end-to-end fine-tuning and precision refinement. We benchmark our proposed method against both traditional optimization-based automated design algorithms and LLM counterparts, and experimental results show the superiority of our method.

  • 9 authors
·
Feb 27

Towards Robust and Generalizable Lensless Imaging with Modular Learned Reconstruction

Lensless cameras disregard the conventional design that imaging should mimic the human eye. This is done by replacing the lens with a thin mask, and moving image formation to the digital post-processing. State-of-the-art lensless imaging techniques use learned approaches that combine physical modeling and neural networks. However, these approaches make simplifying modeling assumptions for ease of calibration and computation. Moreover, the generalizability of learned approaches to lensless measurements of new masks has not been studied. To this end, we utilize a modular learned reconstruction in which a key component is a pre-processor prior to image recovery. We theoretically demonstrate the pre-processor's necessity for standard image recovery techniques (Wiener filtering and iterative algorithms), and through extensive experiments show its effectiveness for multiple lensless imaging approaches and across datasets of different mask types (amplitude and phase). We also perform the first generalization benchmark across mask types to evaluate how well reconstructions trained with one system generalize to others. Our modular reconstruction enables us to use pre-trained components and transfer learning on new systems to cut down weeks of tedious measurements and training. As part of our work, we open-source four datasets, and software for measuring datasets and for training our modular reconstruction.

  • 3 authors
·
Feb 3, 2025

RefracGS: Novel View Synthesis Through Refractive Water Surfaces with 3D Gaussian Ray Tracing

Novel view synthesis (NVS) through non-planar refractive surfaces presents fundamental challenges due to severe, spatially varying optical distortions. While recent representations like NeRF and 3D Gaussian Splatting (3DGS) excel at NVS, their assumption of straight-line ray propagation fails under these conditions, leading to significant artifacts. To overcome this limitation, we introduce RefracGS, a framework that jointly reconstructs the refractive water surface and the scene beneath the interface. Our key insight is to explicitly decouple the refractive boundary from the target objects: the refractive surface is modeled via a neural height field, capturing wave geometry, while the underlying scene is represented as a 3D Gaussian field. We formulate a refraction-aware Gaussian ray tracing approach that accurately computes non-linear ray trajectories using Snell's law and efficiently renders the underlying Gaussian field while backpropagating the loss gradients to the parameterized refractive surface. Through end-to-end joint optimization of both representations, our method ensures high-fidelity NVS and view-consistent surface recovery. Experiments on both synthetic and real-world scenes with complex waves demonstrate that RefracGS outperforms prior refractive methods in visual quality, while achieving 15x faster training and real-time rendering at 200 FPS. The project page for RefracGS is available at https://yimgshao.github.io/refracgs/.

  • 9 authors
·
Mar 22

DirectL: Efficient Radiance Fields Rendering for 3D Light Field Displays

Autostereoscopic display, despite decades of development, has not achieved extensive application, primarily due to the daunting challenge of 3D content creation for non-specialists. The emergence of Radiance Field as an innovative 3D representation has markedly revolutionized the domains of 3D reconstruction and generation. This technology greatly simplifies 3D content creation for common users, broadening the applicability of Light Field Displays (LFDs). However, the combination of these two fields remains largely unexplored. The standard paradigm to create optimal content for parallax-based light field displays demands rendering at least 45 slightly shifted views preferably at high resolution per frame, a substantial hurdle for real-time rendering. We introduce DirectL, a novel rendering paradigm for Radiance Fields on 3D displays. We thoroughly analyze the interweaved mapping of spatial rays to screen subpixels, precisely determine the light rays entering the human eye, and propose subpixel repurposing to significantly reduce the pixel count required for rendering. Tailored for the two predominant radiance fields--Neural Radiance Fields (NeRFs) and 3D Gaussian Splatting (3DGS), we propose corresponding optimized rendering pipelines that directly render the light field images instead of multi-view images. Extensive experiments across various displays and user study demonstrate that DirectL accelerates rendering by up to 40 times compared to the standard paradigm without sacrificing visual quality. Its rendering process-only modification allows seamless integration into subsequent radiance field tasks. Finally, we integrate DirectL into diverse applications, showcasing the stunning visual experiences and the synergy between LFDs and Radiance Fields, which unveils tremendous potential for commercialization applications. direct-l.github.io{Project Homepage

  • 7 authors
·
Jul 18, 2024

OCTCube-M: A 3D multimodal optical coherence tomography foundation model for retinal and systemic diseases with cross-cohort and cross-device validation

We present OCTCube-M, a 3D OCT-based multi-modal foundation model for jointly analyzing OCT and en face images. OCTCube-M first developed OCTCube, a 3D foundation model pre-trained on 26,685 3D OCT volumes encompassing 1.62 million 2D OCT images. It then exploits a novel multi-modal contrastive learning framework COEP to integrate other retinal imaging modalities, such as fundus autofluorescence and infrared retinal imaging, into OCTCube, efficiently extending it into multi-modal foundation models. OCTCube achieves best performance on predicting 8 retinal diseases, demonstrating strong generalizability on cross-cohort, cross-device and cross-modality prediction. OCTCube can also predict cross-organ nodule malignancy (CT) and low cardiac ejection fraction as well as systemic diseases, such as diabetes and hypertension, revealing its wide applicability beyond retinal diseases. We further develop OCTCube-IR using COEP with 26,685 OCT and IR image pairs. OCTCube-IR can accurately retrieve between OCT and IR images, allowing joint analysis between 3D and 2D retinal imaging modalities. Finally, we trained a tri-modal foundation model OCTCube-EF from 4 million 2D OCT images and 400K en face retinal images. OCTCube-EF attains the best performance on predicting the growth rate of geographic atrophy (GA) across datasets collected from 6 multi-center global trials conducted in 23 countries. This improvement is statistically equivalent to running a clinical trial with more than double the size of the original study. Our analysis based on another retrospective case study reveals OCTCube-EF's ability to avoid false positive Phase-III results according to its accurate treatment effect estimation on the Phase-II results. In sum, OCTCube-M is a 3D multi-modal foundation model framework that integrates OCT and other retinal imaging modalities revealing substantial diagnostic and prognostic benefits.

  • 12 authors
·
Aug 20, 2024

Wave optics lensing of gravitational waves: theory and phenomenology of triple systems in the LISA band

We study lensing of gravitational waves by a black hole in the deep wave optics regime, i.e. when the wavelength is much larger than the black hole Schwarzschild radius. We apply it to triple systems, with a binary of stellar mass objects in the inspiraling phase orbiting around a central massive black hole. We describe the full polarisation structure of the wave and derive predictions for the polarisation modes of the scattered wave measured by the observer. We show that lensing in the wave optics regime is not helicity preserving, as opposed to lensing in the geometric optics regime. The amplitude of the total wave is modulated due to interference between the directly transmitted and lensed components. The relative amplitude of the modulation is fixed by the lensing geometry and can reach unity in the most favourable settings. This indicates that wave optics lensing is potentially detectable by LISA for sufficiently high SNR systems. Our findings show that in the wave optics regime it is necessary to go beyond the usual lensing description where the amplification factor is assumed to be the same for both helicity modes. While motivated by GW190521 and the AGN formation scenario, our results apply more broadly to stellar-mass binaries orbiting a third body described as a Schwarzschild black hole, with a period comparable to the GW observation time.

  • 4 authors
·
Apr 10, 2024

Computational illumination for high-speed in vitro Fourier ptychographic microscopy

We demonstrate a new computational illumination technique that achieves large space-bandwidth-time product, for quantitative phase imaging of unstained live samples in vitro. Microscope lenses can have either large field of view (FOV) or high resolution, not both. Fourier ptychographic microscopy (FPM) is a new computational imaging technique that circumvents this limit by fusing information from multiple images taken with different illumination angles. The result is a gigapixel-scale image having both wide FOV and high resolution, i.e. large space-bandwidth product (SBP). FPM has enormous potential for revolutionizing microscopy and has already found application in digital pathology. However, it suffers from long acquisition times (on the order of minutes), limiting throughput. Faster capture times would not only improve imaging speed, but also allow studies of live samples, where motion artifacts degrade results. In contrast to fixed (e.g. pathology) slides, live samples are continuously evolving at various spatial and temporal scales. Here, we present a new source coding scheme, along with real-time hardware control, to achieve 0.8 NA resolution across a 4x FOV with sub-second capture times. We propose an improved algorithm and new initialization scheme, which allow robust phase reconstruction over long time-lapse experiments. We present the first FPM results for both growing and confluent in vitro cell cultures, capturing videos of subcellular dynamical phenomena in popular cell lines undergoing division and migration. Our method opens up FPM to applications with live samples, for observing rare events in both space and time.

  • 6 authors
·
Sep 19, 2015