Daily Papers

Standard bulk probes of multiband superconductors cannot assign pairing gaps to specific electron or hole Fermi surfaces. Here we show that thermal Hall transport (κ_{xy}), constrained by specific heat and normal-state magnetotransport, resolves this ambiguity in the compensated heavy-fermion superconductor CeRu_2. Fixing the gap magnitudes (Δ_e/k_Bapprox 13K, Δ_h/k_Bapprox 8K) and band mobilities completely determines the electronic degrees of freedom in κ_{xx} and κ_{xy}. A low-field sign reversal in κ_{xy} places the larger gap on the heavy Ce 4f electron sheets and the smaller on the hole sheets.

In a two-band superconductor, two qualitatively different fluctuation modes related to the gap modules contribute to free energy and heat capacity, in addition to the phase fluctuations. The first mode has divergent temperature behaviour since it accounts for the critical fluctuations around the phase transition point, Tc, along with pseudo-critical ones associated with former instability of the weaker-superconductivity component. The involvement of these two factors, competing under interband interaction, results in the Ginzburg number which increases with Tc non-monotonically, allowing the reduction up to 75%. This makes fluctuations effective for revealing additional superconducting component in the system. The second mode does not diverge, but has a jump at Tc, defined uniquely by the strength of interband interaction. This mode contributes fundamentally beyond critical domain.

The application of superconducting materials is becoming more and more widespread. Traditionally, the discovery of new superconducting materials relies on the experience of experts and a large number of "trial and error" experiments, which not only increases the cost of experiments but also prolongs the period of discovering new superconducting materials. In recent years, machine learning has been increasingly applied to materials science. Based on this, this manuscript proposes the use of XGBoost model to identify superconductors; the first application of deep forest model to predict the critical temperature of superconductors; the first application of deep forest to predict the band gap of materials; and application of a new sub-network model to predict the Fermi energy level of materials. Compared with our known similar literature, all the above algorithms reach state-of-the-art. Finally, this manuscript uses the above models to search the COD public dataset and identify 50 candidate superconducting materials with possible critical temperature greater than 90 K.

We develop a multi-step workflow for the discovery of conventional superconductors, starting with a Bardeen Cooper Schrieffer inspired pre-screening of 1736 materials with high Debye temperature and electronic density of states. Next, we perform electron-phonon coupling calculations for 1058 of them to establish a large and systematic database of BCS superconducting properties. Using the McMillan-Allen-Dynes formula, we identify 105 dynamically stable materials with transition temperatures, Tc>5 K. Additionally, we analyze trends in our dataset and individual materials including MoN, VC, VTe, KB6, Ru3NbC, V3Pt, ScN, LaN2, RuO2, and TaC. We demonstrate that deep-learning(DL) models can predict superconductor properties faster than direct first principles computations. Notably, we find that by predicting the Eliashberg function as an intermediate quantity, we can improve model performance versus a direct DL prediction of Tc. We apply the trained models on the crystallographic open database and pre-screen candidates for further DFT calculations.

Searching for new superconductors, especially unconventional superconductors, has been studied extensively for decades but remains one of the major outstanding challenges in condensed matter physics. Medium/high-entropy alloys (MEAs-HEAs) are new fertile soils of unconventional superconductors and generate widespread interest and questions on the existence of superconductivity in highly disordered materials. Here, we report on the effect of Ni-doped on the crystal structure and superconductivity properties of strongly coupled TiHfNbTa MEA. XRD results indicate that the maximum solid solution of (Ti1/4Hf1/4Nb1/4Ta1/4)1-xNix is about 7.7%. Resistivity, magnetic susceptibility, and specific heat measurements demonstrated that (Ti1/4Hf1/4Nb1/4Ta1/4)1-xNix HEAs are all bulk type-II superconductors and follow the trend of the increase of Tc with the increase of Ni-doped contents. The specific heat jump of all (Ti1/4Hf1/4Nb1/4Ta1/4)1-xNix are much larger than the BCS value of 1.43, suggesting all these HEAs are strongly coupled superconductors. Additionally, large Kadawaki-Woods ratio values suggest that there is a strong electron correlation effect in this system. The (Ti1/4Hf1/4Nb1/4Ta1/4)1-xNix HEA system is a new ideal material platform for the study of strong correlation behavior and strongly coupled superconductivity, which provides an insight into the physics of high-temperature superconductors or other unconventional superconductors.

We present a 380-520 GHz balanced superconductor-insulator-superconductor (SIS) mixer on a single silicon substrate. All radio-frequency (RF) circuit components are fabricated on a 9 μm thick membrane. The intermediate frequency (IF) is separately amplified and combined. The balanced mixer chip, using Nb/Al/Al_{2}O_{3}/Nb SIS junctions, is mounted in a tellurium copper waveguide block at 4.2 K using Au beam lead contacts. We find uncorrected minimum receiver double-sideband noise temperatures of 70 K and a noise suppression of up to 18 dB, measured within a 440-495 GHz RF and a 4-8 GHz IF bandwidth, representing state-of-the-art device performance.

The discovery of high-temperature superconducting materials holds great significance for human industry and daily life. In recent years, research on predicting superconducting transition temperatures using artificial intelligence~(AI) has gained popularity, with most of these tools claiming to achieve remarkable accuracy. However, the lack of widely accepted benchmark datasets in this field has severely hindered fair comparisons between different AI algorithms and impeded further advancement of these methods. In this work, we present the HTSC-2025, an ambient-pressure high-temperature superconducting benchmark dataset. This comprehensive compilation encompasses theoretically predicted superconducting materials discovered by theoretical physicists from 2023 to 2025 based on BCS superconductivity theory, including the renowned X_2YH_6 system, perovskite MXH_3 system, M_3XH_8 system, cage-like BCN-doped metal atomic systems derived from LaH_{10} structural evolution, and two-dimensional honeycomb-structured systems evolving from MgB_2. The HTSC-2025 benchmark has been open-sourced at https://github.com/xqh19970407/HTSC-2025 and will be continuously updated. This benchmark holds significant importance for accelerating the discovery of superconducting materials using AI-based methods.

The optical properties of the superconducting K_{0.8}Fe_{1.7}(Se_{0.73}S_{0.27})_2 single crystals with a critical temperature T_capprox 26 K have been measured in the {\it ab} plane in a wide frequency range using both infrared Fourier-transform spectroscopy and spectroscopic ellipsometry at temperatures of 4--300 K. The normal-state reflectance of K_{0.8}Fe_{1.7}(Se_{0.73}S_{0.27})_2 is analyzed using a Drude-Lorentz model with one Drude component. The temperature dependences of the plasma frequency, optical conductivity, scattering rate, and dc resistivity of the Drude contribution in the normal state are presented. In the superconducting state, we observe a signature of the superconducting gap opening at 2Δ(5~K) = 11.8~meV. An abrupt decrease in the low-frequency dielectric permittivity varepsilon _1(ω) at T < T_c also evidences the formation of the superconducting condensate. The superconducting plasma frequency ω_{pl,s} = (213pm 5)~cm^{-1} and the magnetic penetration depth λ=(7.5pm 0.2)~μm at T=5~K are determined.

Data-driven methods, in particular machine learning, can help to speed up the discovery of new materials by finding hidden patterns in existing data and using them to identify promising candidate materials. In the case of superconductors, which are a highly interesting but also a complex class of materials with many relevant applications, the use of data science tools is to date slowed down by a lack of accessible data. In this work, we present a new and publicly available superconductivity dataset ('3DSC'), featuring the critical temperature T_c of superconducting materials additionally to tested non-superconductors. In contrast to existing databases such as the SuperCon database which contains information on the chemical composition, the 3DSC is augmented by the approximate three-dimensional crystal structure of each material. We perform a statistical analysis and machine learning experiments to show that access to this structural information improves the prediction of the critical temperature T_c of materials. Furthermore, we see the 3DSC not as a finished dataset, but we provide ideas and directions for further research to improve the 3DSC in multiple ways. We are confident that this database will be useful in applying state-of-the-art machine learning methods to eventually find new superconductors.

The nature of superconductivity in nonsymmorphic In2Bi remains an open question, with ongoing debate over whether it exhibits conventional (BCS-like) or unconventional superconductivity. Here we report the physical characteristics and superconducting properties of polycrystalline In2Bi. Measurements of electrical resistivity, magnetization, penetration depth, and specific heat demonstrate the superconducting transition temperature about 6 K, with a sharp transition in resistivity (Delta_Tc = 0.1 K) and RRR = 57.32, reflecting the high quality of the sample. The upper critical field Hc2(0) obtained from resistivity and magnetization measurements are in good agreement with each other and are smaller than the Pauli limit, suggesting orbital limited mechanism. The coherence length = 35.43 nm, penetration depth = 101.9 nm and electron-phonon coupling constant = 1.05 suggest strongly coupled type-II superconductivity. For T<Tc, Delta_lambda(T) is best described by an s-wave BCS model and does not have any power law dependency with T, which is expected for a nodeless superconducting order parameter. The superfluid density reveals a fully gapped superconductivity with a gap of 2Delta_0/kBTc = 4.02. In the superconducting state, the electronic specific heat is best described by an s-wave BCS model with a gap of 2Delta_0/kBTc = 4.05. All these results from the present study indicate that In2Bi is a typical type-II,BCS-like, strongly coupled, and fully gapped superconductor in the dirty limit.

Prediction of critical temperature (T_c) of a superconductor remains a significant challenge in condensed matter physics. While the BCS theory explains superconductivity in conventional superconductors, there is no framework to predict T_c of unconventional, higher T_{c} superconductors. Quantum Structure Diagrams (QSD) were successful in establishing structure-property relationship for superconductors, quasicrystals, and ferroelectric materials starting from chemical composition. Building on the QSD ideas, we demonstrate that the principal component analysis of superconductivity data uncovers the clustering of various classes of superconductors. We use machine learning analysis and cleaned databases of superconductors to develop predictive models of T_c of a superconductor using its chemical composition. Earlier studies relied on datasets with inconsistencies, leading to suboptimal predictions. To address this, we introduce a data-cleaning workflow to enhance the statistical quality of superconducting databases by eliminating redundancies and resolving inconsistencies. With this improvised database, we apply a supervised machine learning framework and develop a Random Forest model to predict superconductivity and T_c as a function of descriptors motivated from Quantum Structure Diagrams. We demonstrate that this model generalizes effectively in reasonably accurate prediction of T_{c} of compounds outside the database. We further employ our model to systematically screen materials across materials databases as well as various chemically plausible combinations of elements and predict Tl_{5}Ba_{6}Ca_{6}Cu_{9}O_{29} to exhibit superconductivity with a T_{c} sim 105 K. Being based on the descriptors used in QSD's, our model bypasses structural information and predicts T_{c} merely from the chemical composition.

Superconductor electronics (SCE) is a promising complementary and beyond CMOS technology. However, despite its practical benefits, the realization of SCE logic faces a significant challenge due to the absence of dense and scalable nonvolatile memory designs. While various nonvolatile memory technologies, including Non-destructive readout, vortex transitional memory (VTM), and magnetic memory, have been explored, achieving a superconductor random-access memory (RAM) crossbar array remains challenging. This paper introduces a novel, nonvolatile, high-density, and scalable VTM cell design for SCE applications. Our proposed design addresses scaling issues while boasting zero static power consumption characteristics. Our design leverages current summation, enabling analog multiply-accumulate operations -an essential feature for many in-memory computational tasks. We demonstrate the efficacy of our approach with a 32 x 32 superconductor memory array operating at 20 GHz. This design effectively addresses scaling issues and utilizes current summation that can be used for analog multiply-accumulate operations. Additionally, we showcase the accumulation property of the memory through analog simulations conducted on an 8 x 8 superconductor crossbar array.

Critical temperature, T_c, and the transition width, ΔT_c, are two primary parameters of the superconducting transition. The latter parameter reflects the superconducting state disturbance originating from the thermodynamic fluctuations, atomic disorder, applied magnetic field, the presence of secondary crystalline phases, applied pressure, etc. Recently, Hirsch and Marsiglio (2020 arXiv:2012.12796) performed an analysis of the transition width in several near-room-temperature superconductors (NRTS) and reported that the reduced transition width, ΔT_c/T_c, in these materials does not follow a conventional trend of transition width broadening on applied magnetic field observed in low- and high-T_c superconductors. Here we present thorough mathematical analysis of the magnetoresistive data, R(T,B), for the high-entropy alloy (ScZrNb)_{0.65}[RhPd]_{0.35} and hydrogen-rich superconductors of Im-3m-H_{3}S, C2/m-LaH_{10} and P63/mmc-CeH_9. We found that the reduced transition width, ΔT_c/T_c, in these materials does follow a conventional broadening trend on applied magnetic field.

A growing number of papers are published in the area of superconducting materials science. However, novel text and data mining (TDM) processes are still needed to efficiently access and exploit this accumulated knowledge, paving the way towards data-driven materials design. Herein, we present SuperMat (Superconductor Materials), an annotated corpus of linked data derived from scientific publications on superconductors, which comprises 142 articles, 16052 entities, and 1398 links that are characterised into six categories: the names, classes, and properties of materials; links to their respective superconducting critical temperature (Tc); and parametric conditions such as applied pressure or measurement methods. The construction of SuperMat resulted from a fruitful collaboration between computer scientists and material scientists, and its high quality is ensured through validation by domain experts. The quality of the annotation guidelines was ensured by satisfactory Inter Annotator Agreement (IAA) between the annotators and the domain experts. SuperMat includes the dataset, annotation guidelines, and annotation support tools that use automatic suggestions to help minimise human errors.

Hybrid superconductor-semiconductor systems have received a great deal of attention in the last few years because of their potential for quantum engineering, including novel qubits and topological devices. The proximity effect, the process by which the semiconductor inherits superconducting correlations, is an essential physical mechanism of such hybrids. Recent experiments have demonstrated the proximity effect in hole-based semiconductors, but, in contrast to electrons, the precise mechanism by which the hole bands acquire superconducting correlations remains an open question. In addition, hole spins exhibit a complex strong spin-orbit interaction, with largely anisotropic responses to electric and magnetic fields, further motivating the importance of understanding the interplay between such effects and the proximity effect. In this work, we analyze this physics with focus on germanium-based two-dimensional gases. Specifically, we develop an effective theory supported by full numerics, allowing us to extract various analytical expressions and predict different types of superconducting correlations including non-standard forms of singlet and triplet pairing mechanisms with non-trivial momentum dependence; as well as different Zeeman and Rashba spin-orbit contributions. This, together with their precise dependence on electric and magnetic fields, allows us to make specific experimental predictions, including the emergence of f-type superconductivity, Bogoliubov Fermi surfaces, and gapless regimes caused by large in-plane magnetic fields.

We propose a semi-automatic staging area for efficiently building an accurate database of experimental physical properties of superconductors from literature, called SuperCon2, to enrich the existing manually-built superconductor database SuperCon. Here we report our curation interface (SuperCon2 Interface) and a workflow managing the state transitions of each examined record, to validate the dataset of superconductors from PDF documents collected using Grobid-superconductors in a previous work. This curation workflow allows both automatic and manual operations, the former contains ``anomaly detection'' that scans new data identifying outliers, and a ``training data collector'' mechanism that collects training data examples based on manual corrections. Such training data collection policy is effective in improving the machine-learning models with a reduced number of examples. For manual operations, the interface (SuperCon2 interface) is developed to increase efficiency during manual correction by providing a smart interface and an enhanced PDF document viewer. We show that our interface significantly improves the curation quality by boosting precision and recall as compared with the traditional ``manual correction''. Our semi-automatic approach would provide a solution for achieving a reliable database with text-data mining of scientific documents.

We demonstrate the existence of type 1.5 like superconductivity in a single component Ginzburg-Landau model with a higher order potential. The model exhibits two competing superconducting Meissner states (MS), each of which has its own pair of length scales (coherence length and penetration depth). The solutions take the form of bags that contain vortices of one vacuum inside the other. This gives rise to four different types of vortex interaction, where one set of length scales determines vortex interactions inside the bags and the other set between the bags. Hence, within the bag the vortices can repel or attract and the bags themselves can repel or attract depending on the hierarchy of four length scales. When vortices repel within the bag, solutions act similarly to those in type 1.5 multicomponent superconductors, but in a single component system.

Based on a time-dependent Ginzburg-Landau system of equations and finite element modeling, we present novel results related with the physics of phase-slippage in superconducting wires surrounded by a non-superconductive environment. These results are obtained within our previously reported approach related to superconducting rings and superconductive gravitational wave detector transducers. It is shown that the phase-slip centers (PSCs) can be effective in originating not only positive but also negative thermal fluxes. With an appropriate design utilizing thermal diodes, PSCs can serve as cryocooling engines. Operating at Tsim 1 K cryostat cold-finger, they can achieve sub-Kelvin temperatures without using ^3He.

We report on studies of the superconducting and normal state properties of the noncentrosymmetric superconductor BeAu under hydrostatic pressure conditions. The room-temperature equation of state (EOS) reveals the values of the bulk modulus (B_0) and its first derivative (B^prime_0) at ambient pressure to be B_0 simeq 132~GPa and B^prime_0 simeq 30, respectively. Up to the highest pressures studied (p simeq 2.2~GPa), BeAu remains a multi-gap type-I superconductor. The analysis of B_{rm c}(T, p) data within the self-consistent two-gap approach suggests the presence of two superconducting energy gaps, with the gap-to-T_{rm c} ratios Δ_1/k_{rm B}T_{rm c} sim 2.3 and Δ_2/k_{rm B}T_{rm c} sim 1.1 for the larger and smaller gaps, respectively [Δ= Δ(0) is the zero-temperature value of the gap and k_{rm B} is the Boltzmann constant]. With increasing pressure, Δ_1/k_{rm B}T_{rm c} increases while Δ_2/k_{rm B}T_{rm c} decreases, suggesting that pressure enhances (weakens) the coupling strength between the superconducting carriers within the bands where the larger (smaller) superconducting energy gap has opened. The superconducting transition temperature T_{rm c}, black{the zero-temperature values of the superconducting gaps Δ_1 and Δ_2} and the zero-temperature value of the thermodynamic critical field B_{rm c}(0) decrease with increasing pressure, with the rates of {rm d}T_{rm c}/{rm d}p simeq -0.195~K/GPa, black{{rm d}Δ_1/{rm d}p simeq -0.034~meV/GPa, {rm d}Δ_2/{rm d}p simeq -0.029~meV/GPa,} and {rm d}B_{rm c}(0)/{rm d}p = -2.65(1)~mT/GPa, respectively. The measured B_{rm c}(0) values plotted as a function of T_{rm c} follow an empirical scaling relation established for conventional type-I superconductors.

Hydrogen-rich materials under pressure are candidates for conventional phonon-mediated superconductivity, but first-principles electron--phonon-coupling (EPC) calculations are computationally demanding. We develop an interpretable multistage workflow for prioritizing binary hydride superconductors before full EPC calculations. Using controlled cubic X_mH_n prototypes at 200~GPa, we introduce the spectral moment A_1 as an intermediate measure of electron--phonon perturbation strength. In its linewidth-based construction, A_1 remains finite as harmonic phonons soften, allowing related structures with imaginary harmonic modes to be screened; it does not establish superconductivity or physical realizability for unstable structures. For dynamically stable cubic systems, A_1 correlates strongly with the H-1s density-of-states fraction at the Fermi level, α, a projected Fermi-surface descriptor, β, and atomic number density, ρ. These trends are summarized heuristically by A_1approx hαβρ, where h is framework- and pressure-dependent; the descriptor is used for ranking, not as a universal T_c predictor. We incorporate αβρ and enthalpic competitiveness into a three-stage evolutionary search comprising multiobjective structural screening, harmonic-phonon stability filtering, and coarse density-functional perturbation-theory (DFPT) EPC calculations. Application to more than 100,000 binary hydride structures at 50 and 200~GPa identifies candidates and prioritizes NaH_6 structural families. Higher-accuracy calculations show that Pm3m NaH_6 is dynamically stable down to 50~GPa and has a harmonic Allen--Dynes estimate of T_capprox230~K. The framework combines electronic descriptors with progressively more expensive stability and EPC calculations for scalable hydride exploration.

We investigate the superconducting properties of RuO_2 films grown on TiO_2 substrates by combining film fabrication and transport measurement with ab initio calculation. Experimentally, we grow several RuO_2 (110) thin films on TiO_2 (110) substrates and observe superconductivity with critical temperature (T_c) of sim2.0 K in 20-nm and 30-nm RuO_2 (110) thin films. Theoretically, we study the superconductivity in both RuO_2 (110) and RuO_2 (100) epitaxial films within McMillan formalism of isotropic Migdal-Eliashberg theory. Among the salient results, the calculated phonon dispersion relations of all the considered RuO_2 films show that the epitaxial films are dynamically stable. Importantly, our ab initio calculations reveal that independent of the film orientation, the [001] compressive strain ε_{[001]} pushes the flat Ru d_{z^2}-dominant bands towards the Fermi level (E_F), and significantly soften the out-of-plane acoustic phonon mode near the R point in the Brillouin zone, which substantially enhances the electron-phonon coupling (EPC) strength λ and hence the calculated T_c in the RuO_2 films. Remarkably, the amount of the phonon softening and the enhanced T_c increase almost linearly with the increasing ε_{[001]}. The calculated T_c for the films with thickness of geq 20 nm agree well with the experimental T_c. These findings demonstrate that among other things, lattice mismatch strain provides an effective route for tuning phonon-mediated superconductivity in RuO_2 and other thin films.

Moiré semiconductors provide a physical realization of the Hubbard model. Bandwidth-tuned Mott transitions and complex phase diagrams mimicking those of high-temperature superconductors have been demonstrated near a weak Mott insulating state at half-band-filling. The platform also provides an opportunity to explore the physics of a partially filled Hubbard band at doping densities far away from the Mott insulator, a regime that has remained largely unexplored. Here we report the emergence of an extended strange metal (ESM), in both doping density and twist angle, in a partially filled Hubbard band of twisted bilayer WSe2. The ESM is in the clean limit, persists down to 100mK, and spans over multiple symmetry-breaking ground states; it also appears only at small twist angles, where electronic correlations are strong. These observations distinguish the state from the reported strange metals associated with quantum criticality and favor the viewpoint that it is an intrinsic state of matter. We also report the observation of a new superconducting dome being developed from the ESM but far away from both the Mott insulating state and the van Hove singularity of the material. Our work opens the door to exploring the new regime of partially filled Hubbard bands in the clean limit.

The amplitude of ground state superconducting energy gap Δ(0) and relative jump in electronic specific heat at the transition temperature, ΔC{/}γT_c, are primary fundamental parameters of any superconductor. There are several well-established techniques to measure these values for bulk samples. However, there is limited number of techniques which can be applied to measure these parameters in atomically thin superconductors. Here we proposed a new approach to extract Δ(0) and ΔC{/}γT_c in atomically thin superconductors by utilizing perpendicular, Bc2,perp(T) (when magnetic field is applied in perpendicular direction to the film surface), and parallel, Bc2,||(T) (when magnetic field is applied in parallel direction to the film surface), upper critical field data. Deduced parameters for few layers thick Al, Sn, NbSe2, MoS2, magic angle twisted trilayer graphene (MATTG), and WTe2 are well matched values expected for strong- and moderately strong-coupled electron-phonon mediated superconductors. Observed, in many atomically thin superconductors, an enhancement of Bc2,||(0) above the Pauli-Clogston-Chandrasekhar limiting field (i.e., magnetic field required to break the Cooper pair) is explained based on the sample geometry, without an assumption that some exotic pairing mechanism, for instance, Ising-type, is emergent in these materials.

Comprehensive study using DC transport, specific heat, magnetization, and two-coil mutual inductance measurements unveils an understanding of three temperature regimes in SmB_6: (i) T geq T^{*} (sim66K), (ii) T_g (sim40 K) leq T < T^{*}, and (iii) T < T_g. Onset of Kondo breakdown below T^{*} releases disorder-driven magnetic fluctuations, which splits the bulk (sim116K) and surface Kondo temperature (T_k^{s} approx 7 K). Below T_g, as magnetic fluctuations subside, surface Kondo screening revives, stabilizing the topological surface state and generating an in-gap feature (sim2.2 meV) across which Dirac-like carriers are excited. Nyquist impedance analysis reveals a crossover from purely capacitive to capacitive-inductive behavior, signalling a disorder-driven two-fluid phase of heavy quasiparticles and light, high-mobility carriers below T_g. We identify a characteristic length scale, L_{ν_0}(T), associated with the high-mobility phase, exhibiting an almost divergent trend below T_k^{s}. These findings underscore the complex nature of the surface conducting state in SmB_6.

It has been proposed that the superconducting transition temperature T_{c} of an unconventional superconductor with a large pairing scale but strong phase fluctuations can be enhanced by coupling it to a metal. However, the general efficacy of this approach across different parameter regimes remains an open question. Using the dynamical cluster approximation, we study this question in a system composed of an attractive Hubbard layer in the intermediate coupling regime, where the magnitude of the attractive Coulomb interaction |U| is slightly larger than the bandwidth W, hybridized with a noninteracting metallic layer. We find that while the superconducting transition becomes more mean-field-like with increasing interlayer hopping, the superconducting transition temperature T_{c} exhibits a nonmonotonic dependence on the strength of the hybridization t_{perp}. This behavior arises from a reduction of the effective pairing interaction in the correlated layer that out-competes the growth in the intrinsic pair-field susceptibility induced by the coupling to the metallic layer. We find that the largest T_{c} inferred here for the composite system is below the maximum value currently estimated for the isolated negative-U Hubbard model.

Unconventional superconductivity presents a defining and enduring challenge in condensed matter physics. Prevailing theoretical frameworks have predominantly emphasized electronic degrees of freedom, largely neglecting the rich physics inherent in the lattice. Although conventional phonon theory offers an elegant description of structural phase diagrams and lattice dynamics, its omission of nuclear quantum many-body effects results in misleading phase diagram interpretations and, consequently, an unsound foundation for superconducting theory. Here, by incorporating nuclear quantum many-body effects within first-principles calculations, we discover a lattice quantum disordered phase in superconductors H3S and La3Ni2O7. This phase occupies a triangular region in the pressure-temperature phase diagram, whose left boundary aligns precisely with Tc of the left flank of the superconducting dome. The Tcmax of this quantum disordered phase coincides with the maximum of superconducting Tc, indicating this phase as both the origin of superconductivity on the dome's left flank and a key ingredient of its pairing mechanism. Our findings advance the understanding of high-temperature superconductivity and establish the lattice quantum disordered phase as a unifying framework, both for predicting new superconductors and for elucidating phenomena in a broader context of condensed matter physics.

The superconducting materials that make up an MKID have a significant effect on its performance. The T_c and normal state resistivity ρ_N of the film determine the penetration depth λ and therefore how much kinetic inductance it has. The ratio of kinetic inductance to total inductance (α), the volume of the inductor, and Q_m determines the magnitude of the response to incoming energy. The quasiparticle lifetime τ_qp is the characteristic time during which the MKID's surface impedance is modified by the incoming energy. Many materials have been explored for use in superconducting resonators and MKIDs, but that information is often not published or scattered around the literature. This chapter contains information and references on the work that has been done with thin film lithographed circuits for MKIDs over the last two decades. Note that measured material properties such as the internal loss quality factor Q_i and quasiparticle lifetime τ_qp vary significantly depending on how the MKID superconducting thin film is made and the system they are measured in, so it is best to interpret all stated values as typical but not definitive. Values are omitted in cases when there aren't enough measurements or there is too much disagreement in the literature to estimate a typical value. In order to be as complete as possible some unpublished results from the author's lab are included and can be identified by the lack of a reference. Unless noted all films are polycrystalline or amorphous.

Trapped fields of over 20 T are, in principle, achievable in bulk, single-grain high temperature cuprate superconductors. The principle barriers to realizing such performance are, firstly, the large tensile stresses that develop during the magnetization of such trapped-field magnets as a result of the Lorentz force, which lead to brittle fracture of these ceramic-like materials at high fields and, secondly, catastrophic thermal instabilities as a result of flux movement during magnetization. Moreover, for a batch of samples nominally fabricated identically, the statistical nature of the failure mechanism means the best performance (i.e. trapped fields of over 17 T) cannot be attained reliably. The magnetization process, particularly to higher fields, also often damages the samples such that they cannot repeatedly trap high fields following subsequent magnetization. In this study, we report the sequential trapping of magnetic fields of ~ 17 T, achieving 16.8 T at 26 K initially and 17.6 T at 22.5 K subsequently, in a stack of two Ag-doped GdBa2Cu3O7-δ bulk superconductor composites of diameter 24 mm reinforced with (1) stainless-steel laminations, and (2) shrink-fit stainless steel rings. A trapped field of 17.6 T is, in fact, comparable with the highest trapped fields reported to date for bulk superconducting magnets of any mechanical and chemical composition, and this was achieved using the first composite stack to be fabricated by this technique.

Superconductivity allows electrical current to flow without any energy loss, and thus making solids superconducting is a grand goal of physics, material science, and electrical engineering. More than 16 Nobel Laureates have been awarded for their contribution to superconductivity research. Superconductors are valuable for sustainable development goals (SDGs), such as climate change mitigation, affordable and clean energy, industry, innovation and infrastructure, and so on. However, a unified physics theory explaining all superconductivity mechanism is still unknown. It is believed that superconductivity is microscopically due to not only molecular compositions but also the geometric crystal structure. Hence a new dataset, S2S, containing both crystal structures and superconducting critical temperature, is built upon SuperCon and Material Project. Based on this new dataset, we propose a novel model, S2SNet, which utilizes the attention mechanism for superconductivity prediction. To overcome the shortage of data, S2SNet is pre-trained on the whole Material Project dataset with Masked-Language Modeling (MLM). S2SNet makes a new state-of-the-art, with out-of-sample accuracy of 92% and Area Under Curve (AUC) of 0.92. To the best of our knowledge, S2SNet is the first work to predict superconductivity with only information of crystal structures. This work is beneficial to superconductivity discovery and further SDGs. Code and datasets are available in https://github.com/zjuKeLiu/S2SNet

Ising spin-orbit coupling (SOC) is widely known for locking electronic spins and protecting superconductivity against in-plane paramagnetic pair breaking. Here we show that, in a correlated multiorbital system, Ising SOC can play a qualitatively different role: it reconstructs the hierarchy of spin-fluctuation-mediated pairing channels by reshaping the low-energy Fermi surfaces, orbital-spin coherence factors, and momentum-resolved scattering phase space. We study a noncentrosymmetric two-orbital triangular-lattice model with Rashba SOC, Ising SOC, and onsite SOC. We solve the pairing problem within a multiorbital random-phase-approximation framework. In the single-orbital limit, an E-representation state with a dominant S_z=0 component emerges only at relatively strong Ising SOC. Orbital degrees of freedom facilitate the stabilization of this pairing state at a smaller nominal Ising SOC strength and generate a broad competition between E and A_1 pairing channels. The E state can maintain the same S_z=0 triplet character, whereas the A_1 state becomes a fully gapped sign-changing splusminus superconductor. The latter also realizes a topologically nontrivial phase in the time-reversal-invariant weak-pairing regime, with a nonzero Z_2 index, Wilson-loop spectral flow, and boundary modes. Its topology is not carried by a single orbital pairing component, but emerges cooperatively from the dominant intra- and inter-orbital pairing components. These results establish a microscopic route by which Ising SOC and orbital hybridization can reconstruct interaction-driven superconductivity, producing both Ising-triplet and topological singlet-dominated phases in correlated non-centrosymmetric systems.

A general approach is formulated to describe spontaneous surface current distribution in a chiral p-wave superconductor. We use the quasiclassical Eilenberger formalism in the Ricatti parametrization to describe various types of the superconductor surface, including arbitrary roughness and metallic behaviour of the surface layer. We calculate angle resolved distributions of the spontaneous surface currents and formulate the conditions of their observability. We argue that local measurements of these currents by muSR technique may provide an information on the underlying pairing symmetry in the bulk superconductor.

The automatic extraction of materials and related properties from the scientific literature is gaining attention in data-driven materials science (Materials Informatics). In this paper, we discuss Grobid-superconductors, our solution for automatically extracting superconductor material names and respective properties from text. Built as a Grobid module, it combines machine learning and heuristic approaches in a multi-step architecture that supports input data as raw text or PDF documents. Using Grobid-superconductors, we built SuperCon2, a database of 40324 materials and properties records from 37700 papers. The material (or sample) information is represented by name, chemical formula, and material class, and is characterized by shape, doping, substitution variables for components, and substrate as adjoined information. The properties include the Tc superconducting critical temperature and, when available, applied pressure with the Tc measurement method.

The discovery of novel materials is critical for global energy and quantum technology transitions. While deep learning has fundamentally reshaped this landscape, existing predictive or generative models typically operate in isolation, lacking the autonomous orchestration required to execute the full discovery process. Here we present ElementsClaw, an agentic framework for materials discovery that synergizes Large Atomic Models (LAMs) with Large Language Models (LLMs). In response to varied human queries, ElementsClaw orchestrates a suite of LAM tools finetuned from our proposed 1-billion-parameter model Elements for atomic-scale numerical computation, while leveraging LLMs for high-level semantic reasoning. This shift moves AI-driven materials science from isolated processes toward integrated and human interactive discovery. Applied to superconductors, ElementsClaw screens 2.4 million crystals in just 28 GPU hours to identify 68,000 high-confidence candidates (The complete dataset of screened superconductors is available at https://developer.damo-academy.com/material), expanding known superconducting space by orders of magnitude compared to datasets curated over decades. Critically, ElementsClaw achieves a high success rate in identifying superconductors hidden in literature and discovers four novel experimentally verified superconductors, exemplified by Zr3ScRe8 with a transition temperature of 6.8 K and HfZrRe4 at 6.7 K. Together, our results establish a knowledge integrated, autonomously orchestrated, and experimentally grounded paradigm for materials discovery.

In this work, we propose and study a double Kondo lattice model which hosts robust superconductivity. The system consists of two identical Kondo lattice model, each with Kondo coupling J_K within each layer, while the localized spin moments are coupled together via an inter-layer on-site antiferromagnetic spin coupling J_perp. We consider the strong J_perp limit, wherein the local moments tend to form rung singlets and are thus gapped. However, the Kondo coupling J_K transmits the inter-layer entanglement between the local moments to the itinerant electrons. Consequently, the itinerant electrons experience a strong inter-layer antiferromangetic spin coupling and form strong inter-layer pairing, which is confirmed through numerical simulation in one dimensional system. Experimentally, the J_K rightarrow -infty limits of the model describes the recently found bilayer nickelate La_3Ni_2O_7, while the J_K>0 side can be realized in tetralayer optical lattice of cold atoms. Two extreme limits, J_K rightarrow -infty and J_K rightarrow +infty limit are shown to be simplified to a bilayer type II t-J model and a bilayer one-orbital t-J model, respectively. Thus, our double Kondo lattice model offers a unified framework for nickelate superconductor and tetralayer optical lattice quantum simulator upon changing the sign of J_K. We highlight both the qualitative similarity and the quantitative difference in the two sides of J_K. Finally, we discuss the possibility of a symmetric Kondo breakdown transition in the model with a symmetric pseudogap metal corresponding to the usual heavy Fermi liquid.

This paper explores the potential of cryogenic semiconductor computing and superconductor electronics as promising alternatives to traditional semiconductor devices. As semiconductor devices face challenges such as increased leakage currents and reduced performance at higher temperatures, these novel technologies offer high performance and low power computation. Conventional semiconductor electronics operating at cryogenic temperatures (below -150{\deg}C or 123.15 K) can benefit from reduced leakage currents and improved electron mobility. On the other hand, superconductor electronics, operating below 10 K, allow electrons to flow without resistance, offering the potential for ultra-low-power, high-speed computation. This study presents a comprehensive performance modeling and analysis of these technologies and provides insights into their potential benefits and limitations. We implement models of in-order and out-of-order cores operating at high clock frequencies associated with superconductor electronics and cryogenic semiconductor computing in gem5. We evaluate the performance of these components using workloads representative of real-world applications like NPB, SPEC CPU2006, and GAPBS. Our results show the potential speedups achievable by these components and the limitations posed by cache bandwidth. This work provides valuable insights into the performance implications and design trade-offs associated with cryogenic and superconductor technologies, laying the foundation for future research in this field using gem5.

Exploratory synthesis efforts for iron-based superconductors (FeSC) have been driven by hopes of improving superconducting critical temperatures (TCs), providing high-quality samples for in-depth studies of intrinsic properties, and exploring potential superconductivity in similar families of materials. This manuscript summarizes the synthesis routes that are used for producing FeSC and their undoped parents, in single crystal and polycrystalline forms. A few of the materials challenges are summarized.

For the first time in the world, we succeeded in synthesizing the room-temperature superconductor (T_c ge 400 K, 127^circC) working at ambient pressure with a modified lead-apatite (LK-99) structure. The superconductivity of LK-99 is proved with the Critical temperature (T_c), Zero-resistivity, Critical current (I_c), Critical magnetic field (H_c), and the Meissner effect. The superconductivity of LK-99 originates from minute structural distortion by a slight volume shrinkage (0.48 %), not by external factors such as temperature and pressure. The shrinkage is caused by Cu^{2+} substitution of Pb^{2+}(2) ions in the insulating network of Pb(2)-phosphate and it generates the stress. It concurrently transfers to Pb(1) of the cylindrical column resulting in distortion of the cylindrical column interface, which creates superconducting quantum wells (SQWs) in the interface. The heat capacity results indicated that the new model is suitable for explaining the superconductivity of LK-99. The unique structure of LK-99 that allows the minute distorted structure to be maintained in the interfaces is the most important factor that LK-99 maintains and exhibits superconductivity at room temperatures and ambient pressure.

Recent experiments on 2D superconductors allow the characterization of the critical temperature and of the phase diagram across the BCS-BEC crossover as a function of density. We obtain from these experiments the microscopic parameters of the superconducting state at low temperatures by the BCS mean-field approach. For Li_xZrNCl, the extracted parameters are used to evaluate the superconducting phase stiffness and the Berezinskii-Kosterlitz-Thouless (BKT) critical temperature throughout the BCS-BEC crossover, by implementing the corresponding Renormalization Group (RG) approach. In this way, we make a quantitative test of the predictive power of the BKT theory for evaluating the critical temperature. The RG flow equations turn out to give a sizable renormalization of the phase stiffness and of the critical temperature, which is crucial to obtain a satisfactory agreement between the BKT theory and the experiments, in particular in the BCS-BEC crossover regime. We predict the temperature range where phase stiffness renormalization can be measured in Li_xZrNCl across the BCS-BEC crossover. Contrary to other microscopic theories of superconductivity, we find that the BKT theory can be exploited to evaluate quantitatively the critical temperature of 2D superconductors in different pairing regimes.

We present an open-source database of superconducting quantum device designs that may be used as the starting point for customized devices. Each design can be generated programmatically using the open-source Qiskit Metal package, and simulated using finite-element electromagnetic solvers. We present a robust workflow for achieving high accuracy on design simulations. Many designs in the database are experimentally validated, showing excellent agreement between simulated and measured parameters. Our database includes a front-end interface that allows users to generate ``best-guess'' designs based on desired circuit parameters. This project lowers the barrier to entry for research groups seeking to make a new class of devices by providing them a well-characterized starting point from which to refine their designs.

Mott insulators with large and active (or multiflavor) local Hilbert spaces widely occur in quantum materials and ultracold atomic systems, and are dubbed "multiflavor Mott insulators". For these multiflavored Mott insulating materials, the spin-only description with the quadratic spin interactions is often insufficient to capture the major physical processes. In the situation with active orbitals, the Kugel-Khomskii superexchange model was then proposed. We briefly review this historical model and discuss the modern developments beyond the original spin-orbital context. These include and are not restricted to the 4d/5d transition metal compounds with the spin-orbit-entangled J=3/2 quadruplets, the rare-earth magnets with two weakly-separated crystal field doublets, breathing magnets and/or the cluster and molecular magnets, et al. We explain the microscopic origin of the emergent Kugel-Khomskii physics in each realization with some emphasis on the J=3/2 quadruplets, and refer the candidate multiflavor Mott insulators as "J=3/2 Mott insulators". For the ultracold atoms, we review the multiflavor Mott insulator realization with the ultracold alkaline and alkaline-earth atoms on the optical lattices. Despite a large local Hilbert space from the atomic hyperfine spin states, the system could naturally realize a large symmetry group such as the Sp(N) and SU(N) symmetries. These ultracold atomic systems lie in the large-N regime of these symmetry groups and are characterized by strong quantum fluctuations. The Kugel-Khomskii physics and the exotic quantum ground states with the "baryon-like" physics can appear in various limits. We conclude with our vision and outlook on this subject.

We consider fermions in a zero-temperature superconducting anti-de Sitter domain wall solution and find continuous bands of normal modes. These bands can be either partially filled or totally empty and gapped. We present a semi-classical argument which approximately captures the main features of the normal mode spectrum.

Here we summarize the physical properties of the newly discovered Fe-chalcogenide superconductors. The Fe-chalcogenide superconductors attract us as the simplest Fe-based superconductors. Furthermore, Fe chalcogenides show a huge pressure effect on their superconducting properties. The origin of the high transition temperature was discussed with both the change in crystal structure and magnetism. The progress on the thin-film and superconducting-wire fabrications are also described.

Superconducting travelling-wave parametric amplifiers (TWPAs) provide broadband gain, low added noise, and high dynamic range, making them attractive for applications requiring wide instantaneous bandwidth. This is crucial for amplifying multiplexed narrow band signals spread over a wide frequency range, such as qubit resonator arrays, or amplifying inherently wide band signals, such as in spectrometers or radiometers. In many cases, however, the useful bandwidth of a TWPA is limited by the production of the idler tone at an image frequency. For three-wave-mixing (3WM) TWPAs, for example, an input signal at f_s is indistinguishable from one at f_p - f_s, which can produce spectral ambiguity when the input spectrum is broadband or not known in advance. We experimentally demonstrate a balanced architecture that doubles the instantaneous image-rejected bandwidth available to a 3WM TWPA by spatially separating the amplified signal from the output pump and generated idler, which resolves the sideband degeneracy. The architecture consists of two amplifiers connected between a pair of 180^{circ} hybrid couplers, with the signal and pump injected and output through the sum and difference ports, respectively. Using two kinetic-inductance TWPAs, we demonstrate approximately 20 dB of signal gain across nearly an octave of bandwidth, together with pump rejection below --20 dB and an average image rejection of approximately --15 dB over the operating band. These results establish balanced TWPAs as a practical approach to broadband parametric amplification, enabling improved contamination free bandwidth and eliminating the need for complex filtering.

We conducted a high-throughput search for topological magnetic materials on 522 new, experimentally reported commensurate magnetic structures from MAGNDATA, doubling the number of available materials on the Topological Magnetic Materials database. This brings up to date the previous studies which had become incomplete due to the discovery of new materials. For each material, we performed first-principle electronic calculations and diagnosed the topology as a function of the Hubbard U parameter. Our high-throughput calculation led us to the prediction of 250 experimentally relevant topologically non-trivial materials, which represent 47.89% of the newly analyzed materials. We present five remarkable examples of these materials, each showcasing a different topological phase: Mn{}_2AlB{}_2 (BCSID 1.508), which exhibits a nodal line semimetal to topological insulator transition as a function of SOC, CaMnSi (BCSID 0.599), a narrow gap axion insulator, UAsS (BCSID 0.594) a 5f-orbital Weyl semimetal, CsMnF{}_4 (BCSID 0.327), a material presenting a new type of quasi-symmetry protected closed nodal surface and FeCr{}_2S{}_4 (BCSID 0.613), a symmetry-enforced semimetal with double Weyls and spin-polarised surface states.

The elementary CuO2 plane sustaining cuprate high-temperature superconductivity occurs typically at the base of a periodic array of edge-sharing CuO5 pyramids. Virtual transitions of electrons between adjacent planar Cu and O atoms, occurring at a rate t/{hbar} and across the charge-transfer energy gap E, generate 'superexchange' spin-spin interactions of energy Japprox4t^4/E^3 in an antiferromagnetic correlated-insulator state. However, Hole doping the CuO2 plane converts this into a very high temperature superconducting state whose electron-pairing is exceptional. A leading proposal for the mechanism of this intense electron-pairing is that, while hole doping destroys magnetic order it preserves pair-forming superexchange interactions governed by the charge-transfer energy scale E. To explore this hypothesis directly at atomic-scale, we combine single-electron and electron-pair (Josephson) scanning tunneling microscopy to visualize the interplay of E and the electron-pair density nP in {Bi_2Sr_2CaCu_2O_{8+x}}. The responses of both E and nP to alterations in the distance {\delta} between planar Cu and apical O atoms are then determined. These data reveal the empirical crux of strongly correlated superconductivity in CuO2, the response of the electron-pair condensate to varying the charge transfer energy. Concurrence of predictions from strong-correlation theory for hole-doped charge-transfer insulators with these observations, indicates that charge-transfer superexchange is the electron-pairing mechanism of superconductive {Bi_2Sr_2CaCu_2O_{8+x}}.

Superconducting nanowire single-photon detectors are widely used in various fields of physics and technology, due to their high efficiency and timing precision. Although, in principle, their detection mechanism offers broadband operation, their wavelength range has to be optimized by the optical cavity parameters for a specific task. We present a study of the optical absorption of a superconducting nanowire single photon detector (SNSPD) with an optical cavity. The optical properties of the niobium nitride films, measured by spectroscopic ellipsometry, were modelled using the Drude-Lorentz model with quantum corrections. The numerical simulations of the optical response of the detectors show that the wavelength range of the detector is not solely determined by its geometry, but the optical conductivity of the disordered thin metallic films contributes considerably. This contribution can be conveniently expressed by the ratio of imaginary and real parts of the optical conductivity. This knowledge can be utilized in detector design.

Extracting the London penetration depth, λ(T), from the measured magnetic susceptibility, χ(T), of a superconducting platelet in a perpendicular magnetic field requires knowing the function χ(λ) computed for the actual sample geometry. Thin films are increasingly important in quantum computing and superconducting electronics, most of which operate at ultra-low excitation fields in the vortex-free regime. Understanding their electromagnetic response in the Meissner--London (finite-λ, no vortices) state is therefore essential for extracting intrinsic properties such as the London penetration depth and superfluid phase stiffness. While numerous prior works have addressed different aspects of this problem, here we focus on providing an analytical semi-empirical representation of χ(λ) based on the 2D sheet-current model and establishing the limits of its applicability using two independent full 3D numerical solutions: finite-element modeling and a volume-current integral equation. As a result, we provide χ(λ) for a disc of radius a and thickness d in closed form, valid for all λ and for aspect ratios δequiv d/(2a)le0.05, and accurate to 0.1%. The two-dimensional sheet description with Pearl length Λ=2λ^2/d is adequate for δlesssim10^{-4} and λgtrsim 4d. Thicker films require the full closed form, which includes the three-dimensional corrections. Using the same numerical analysis, we provide an empirical formula that maps rectangular samples---the geometry most commonly used in experiments---onto a disc with an ``effective radius'' for subsequent calculation of χ(λ), and formulate a complete calibration protocol for whole-sample susceptibility measurements.

A refined semi-holographic non-Fermi liquid model, in which carrier electrons hybridize with operators of a holographic critical sector, has been proposed recently for strange metallic behavior. The model, consistently with effective theory approach, has two couplings whose ratio is related to the doping. We explain the origin of the linear-in-T resistivity and strange metallic behavior as a consequence of the emergence of a universal form of the spectral function which is independent of the model parameters when the ratio of the two couplings take optimal values determined only by the critical exponent. This universal form fits well with photoemission data of copper oxide samples for under/optimal/over-doping with a fixed exponent over a wide range of temperatures. We further obtain a refined Planckian dissipation scenario in which the scattering time τ= f cdot hbar /(k_B T), with f being O(1) at strong coupling, but O(10) at weak coupling.

We numerically investigate some properties of unbalanced St\"{u}ckelberg holographic superconductors, by considering backreaction effects of fields on the background geometry. More precisely, we study the impacts of the chemical potential mismatch and St\"{u}ckelberg mechanism on the condensation and conductivity types (electrical, spin, mixed, thermo-electric, thermo-spin and thermal conductivity). Our results show that the St\"{u}ckelberg's model parameters C_{alpha} and alpha not only have significant impacts on the phase transition, but also affect the conductivity pseudo-gap and the strength of conductivity fluctuations. Moreover, the effects of these parameters on a system will be gradually reduced as the imbalance grows. We also find that the influence of alpha on the amplitude of conductivity fluctuations depends on the magnitude of the both C_{alpha} and deltamu/mu in the electric and thermal conductivity cases. This results in that increasing alpha can damp the conductivity fluctuations of an unbalanced system in contrast to balanced ones.

This work culminates in a demonstration of an alternative Frequency Domain Multiplexing (FDM) scheme for Superconducting Nanowire Single-Photon Detectors (SNSPDs) using the Kinetic inductance Parametric UP-converter (KPUP) made out of NbTiN. There are multiple multiplexing architectures for SNSPDs that are already in use, but FDM could prove superior in applications where the operational bias currents are very low, especially for mid- and far-infrared SNSPDs. Previous FDM schemes integrated the SNSPD within the resonator, while in this work we use an external resonator, which gives more flexibility to optimize the SNSPD architecture. The KPUP is a DC-biased superconducting resonator in which a nanowire is used as its inductive element to enable sensitivity to current perturbations. When coupled to an SNSPD, the KPUP can be used to read out current pulses on the few μA scale. The KPUP is made out of NbTiN, which has high non-linear kinetic inductance for increased sensitivity at higher current bias and high operating temperature. Meanwhile, the SNSPD is made from WSi, which is a popular material for broadband SNSPDs. To read out the KPUP and SNSPD array, a software-defined radio platform and a graphics processing unit are used. Frequency Domain Multiplexed SNSPDs have applications in astronomy, remote sensing, exoplanet science, dark matter detection, and quantum sensing.

Disordered hyperuniform materials are very promising for applications but the successful route for synthesizing them requires to understand the interactions induced by the host media that can switch off this hidden order. With this aim we study the model system of vortices in the β-Bi_2Pd superconductor where correlated defects seem to play a determinant role for the nucleation of a gel vortex phase at low densities. We directly image vortices in extended fields-of-view and show that the disordered vortex structure in this material is anti-hyperuniform, contrasting with the case of vortex structures nucleated in samples with point-like disorder. Based on numerical simulations, we show that this anti-hyperuniform structure arises both, from the interaction of a diluted vortex structure with a fourfold-symmetric correlated disorder quite likely generated when cleaving the samples and from the out of equilibrium nature of the quenched configuration.

We present the requirements, design and evaluation of the cryogenic continuously rotating half-wave plate (CHWP) for the Simons Observatory (SO). SO is a cosmic microwave background (CMB) polarization experiment at Parque Astron\'{o}mico Atacama in northern Chile that covers a wide range of angular scales using both small (0.42 m) and large (6 m) aperture telescopes. In particular, the small aperture telescopes (SATs) focus on large angular scales for primordial B-mode polarization. To this end, the SATs employ a CHWP to modulate the polarization of the incident light at 8 Hz, suppressing atmospheric 1/f noise and mitigating systematic uncertainties that would otherwise arise due to the differential response of detectors sensitive to orthogonal polarizations. The CHWP consists of a 505 mm diameter achromatic sapphire HWP and a cryogenic rotation mechanism, both of which are cooled down to sim50 K to reduce detector thermal loading. Under normal operation the HWP is suspended by a superconducting magnetic bearing and rotates with a constant 2 Hz frequency, controlled by an electromagnetic synchronous motor. We find that the number of superconductors and magnets that make up the superconducting magnetic bearing are important design parameters, especially for the rotation mechanism's vibration performance. The rotation angle is detected through an angular encoder with a noise level of 0.07 muradmathrm{s}. During a cooldown, the rotor is held in place by a grip-and-release mechanism that serves as both an alignment device and a thermal path. In this paper we provide an overview of the SO SAT CHWP: its requirements, hardware design, and laboratory performance.

Electron-phonon interaction is of central importance for the electrical and heat transport properties of metals, and is directly responsible for charge-density-waves or (conventional) superconducting instabilities. The direct observation of phonon dispersion anomalies across electronic phase transitions can provide insightful information regarding the mechanisms underlying their formation. Here, we review the current status of phonon dispersion studies in superconductors under hydrostatic and uniaxial pressure. Advances in the instrumentation of high resolution inelastic X-ray scattering beamlines and pressure generating devices allow these measurements to be performed routinely at synchrotron beamlines worldwide.

The system-size scaling of bipartite entanglement can be used to detect phase transitions. We develop a related approach for strongly correlated electron models where large density matrices or large system size scaling are inaccessible. To this end, we demonstrate that phase transitions of various kinds are signaled by a sharp signature in the first- or second-order logarithmic derivatives of the negativity measuring entanglement between small clusters at varying distances. Crucially, we show how to mitigate the effect of quantum Monte Carlo noise at large distances when computing the negativity. Our focus is on the t'-π-flux Hubbard model using auxiliary-field quantum Monte Carlo simulations. It has the particular advantage of showing three distinct phase transitions in a single model: semimetal to band insulator, semimetal to antiferromagnetic Mott insulator, and a magnetic order-disorder transition belonging to the Gaussian, Gross-Neveu, and O(3) Wilson-Fisher universality classes, respectively.

We construct holographic superconductors from Einstein-Maxwell-dilaton gravity in 3+1 dimensions with two adjustable couplings alpha and the charge q carried by the scalar field. For the values of alpha and q we consider, there is always a critical temperature at which a second order phase transition occurs between a hairy black hole and the AdS RN black hole in the canonical ensemble, which can be identified with the superconducting phase transition of the dual field theory. We calculate the electric conductivity of the dual superconductor and find that for the values of alpha and q where alpha/q is small the dual superconductor has similar properties to the minimal model, while for the values of alpha and q where alpha/q is large enough, the electric conductivity of the dual superconductor exhibits novel properties at low frequencies where it shows a "Drude Peak" in the real part of the conductivity.

Vacancies are prevalent and versatile in solid-state physics and materials science. The role of vacancies in strongly correlated materials, however, remains uncultivated until now. Here, we report the discovery of an unprecedented vacancy state forming an extended buckled-honeycomb-vacancy (BHV) ordering in Ir_{16}Sb_{18}. Superconductivity emerges by suppressing the BHV ordering through squeezing of extra Ir atoms into the vacancies or isovalent Rh substitution. The phase diagram on vacancy ordering reveals the superconductivity competes with the BHV ordering. Further theoretical calculations suggest that this ordering originates from a synergistic effect of the vacancy formation energy and Fermi surface nesting with a wave vector of (1/3, 1/3, 0). The buckled structure breaks the crystal inversion symmetry and can mostly suppress the density of states near the Fermi level. The peculiarities of BHV ordering highlight the importance of "correlated vacancies" and may serve as a paradigm for exploring other non-trivial excitations and quantum criticality.

We have systematically investigated the grain boundary (GB) angle dependence of transport properties for NdFeAs(O,F) fabricated on [001]-tilt symmetric MgO bicrystal substrates. In our previous study, NdFeAs(O,F) bicrystal films showed a weak-link behaviour even at a GB angle of 6°. However, this was caused by an extrinsic effect originating from the damage to both NdFeAs(O,F) and MgO substrate by excess F-diffusion along the grain boundary. To investigate the intrinsic nature of grain boundaries, we minimized the damage to NdFeAs(O,F) and MgO by reducing the deposition temperature of NdOF over-layer needed for F-doping. The resultant NdFeAs(O,F) bicrystal films have a critical angle of 8.5°, above which Jc starts to decrease exponentially. This critical angle is almost the same as those of other Fe-based superconductors.

We explore the consequences of multi-trace deformations in applications of gauge-gravity duality to condensed matter physics. We find that they introduce a powerful new "knob" that can implement spontaneous symmetry breaking, and can be used to construct a new type of holographic superconductor. This knob can be tuned to drive the critical temperature to zero, leading to a new quantum critical point. We calculate nontrivial critical exponents, and show that fluctuations of the order parameter are `locally' quantum critical in the disordered phase. Most notably the dynamical critical exponent is determined by the dimension of an operator at the critical point. We argue that the results are robust against quantum corrections and discuss various generalizations.

With their non-Abelian topological charges, real multi-bandgap systems challenge the conventional topological phase classifications. As the minimal sector of multi-bandgap systems, real triple degeneracies (RTPs), which serve as real 'Weyl points', lay the foundation for the research on real topological phases. However, experimental demonstration of physical systems with global band configurations consisting of multiple RTPs in crystals has not been reported. Here we present experimental evidence of RTPs in photonic meta-crystals, characterizing them using the Euler number, and establishing their connection with both Abelian and non-Abelian charges. By considering RTPs as the basic elements, we further propose the concept of a topological compound, akin to a chemical compound, where we find that certain phases are not topologically allowed. The topological classification of RTPs in crystals demonstrated in our work plays a similar role as the 'no-go' theorem in Weyl systems.

Nonreciprocal circuit elements form an integral part of modern measurement and communication systems. Mathematically they require breaking of time-reversal symmetry, typically achieved using magnetic materials and more recently using the quantum Hall effect, parametric permittivity modulation or Josephson nonlinearities. Here, we demonstrate an on-chip magnetic-free circulator based on reservoir engineered optomechanical interactions. Directional circulation is achieved with controlled phase-sensitive interference of six distinct electro-mechanical signal conversion paths. The presented circulator is compact, its silicon-on-insulator platform is compatible with both superconducting qubits and silicon photonics, and its noise performance is close to the quantum limit. With a high dynamic range, a tunable bandwidth of up to 30 MHz and an in-situ reconfigurability as beam splitter or wavelength converter, it could pave the way for superconducting qubit processors with integrated and multiplexed on-chip signal processing and readout.

Electronic band structure (BS) and crystal structure are the two complementary identifiers of solid state materials. While convenient instruments and reconstruction algorithms have made large, empirical, crystal structure databases possible, extracting quasiparticle dispersion (closely related to BS) from photoemission band mapping data is currently limited by the available computational methods. To cope with the growing size and scale of photoemission data, we develop a pipeline including probabilistic machine learning and the associated data processing, optimization and evaluation methods for band structure reconstruction, leveraging theoretical calculations. The pipeline reconstructs all 14 valence bands of a semiconductor and shows excellent performance on benchmarks and other materials datasets. The reconstruction uncovers previously inaccessible momentum-space structural information on both global and local scales, while realizing a path towards integration with materials science databases. Our approach illustrates the potential of combining machine learning and domain knowledge for scalable feature extraction in multidimensional data.

Coupling together distinct correlated and topologically non-trivial electronic phases of matter can potentially induce novel electronic orders and phase transitions among them. Transition metal dichalcogenide compounds serve as a bedrock for exploration of such hybrid systems. They host a variety of exotic electronic phases and their Van der Waals nature enables to admix them, either by exfoliation and stacking or by stoichiometric growth, and thereby induce novel correlated complexes. Here we investigate the compound 4Hb-TaS_2 that interleaves the Mott-insulating state of 1T-TaS_2 and the putative spin liquid it hosts together with the metallic state of 2H-TaS_2 and the low temperature superconducting phase it harbors. We reveal a thermodynamic phase diagram that hosts a first order quantum phase transition between a correlated Kondo cluster state and a flat band state in which the Kondo cluster becomes depleted. We demonstrate that this intrinsic transition can be induced by an electric field and temperature as well as by manipulation of the interlayer coupling with the probe tip, hence allowing to reversibly toggle between the Kondo cluster and the flat band states. The phase transition is manifested by a discontinuous change of the complete electronic spectrum accompanied by hysteresis and low frequency noise. We find that the shape of the transition line in the phase diagram is determined by the local compressibility and the entropy of the two electronic states. Our findings set such heterogeneous structures as an exciting platform for systematic investigation and manipulation of Mott-metal transitions and strongly correlated phases and quantum phase transitions therein.

We review theoretical and experimental highlights in transport in two-dimensional materials focussing on key developments over the last five years. Topological insulators are finding applications in magnetic devices, while Hall transport in doped samples and the general issue of topological protection remain controversial. In transition metal dichalcogenides valley-dependent electrical and optical phenomena continue to stimulate state-of-the-art experiments. In Weyl semimetals the properties of Fermi arcs are being actively investigated. A new field, expected to grow in the near future, focuses on the non-linear electrical and optical responses of topological materials, where fundamental questions are once more being asked about the intertwining roles of the Berry curvature and disorder scattering. In topological superconductors the quest for chiral superconductivity, Majorana fermions and topological quantum computing is continuing apace.

Experiments realizing strong interactions in partially filled Chern bands have observed fractional Chern insulators (FCIs), superconductors, and topological crystals in close proximity. Yet the microscopic relation between them remains poorly understood. Here, we use tensor network simulations to study repulsively interacting spinless fermions in a tunable topological band of the checkerboard lattice. We characterize the competing phases and identify key features of the experimental phenomenology. FCIs from the Jain sequence transition into chiral p-wave superconductivity both below and above half filling as the band dispersion is enhanced. By contrast, at half filling, a generalized Hall crystal with quantized Hall conductance and a doubled unit cell forms for sufficiently strong coupling. Surprisingly, a weak-coupling approach starting from a metallic parent state captures the nature of both ordered phases at intermediate coupling. We find that fluctuations in the metal generate longer-range attraction, which we analyze within the random-phase approximation. This approach captures the pairing symmetry as well as the radial form factors of the Cooper pairs, and incorporating this attraction into Hartree-Fock selects the observed Hall crystal. Together, these results identify fluctuation-induced attraction from repulsion as a common microscopic ingredient of ordering, while our tensor network computations establish the direct competition of both phases with FCIs.

Experiments in recent years on high T_c superconductors find a puzzling nodal scale-covariant self-energy with an exponent varying continuously with doping. We propose a mechanism: nonlocality induced by poorly screened effective repulsions V_α(r) sim 1/r^α, where a continuously doping-dependent exponent 1 le αle 3 naturally interpolates between the Mott insulating and Fermi liquid limits. We develop a phenomenology of hydrodynamic screening, finding a scale-covariant quasiparticle decay rate Γ(ω,T) propto T^γ Φ(ω/T) in energy ω and temperature T, with γ= 2-1α for nonlocal 1 < α< 2. Our results naturally capture the optimally doped to overdoped regimes, whereas the underdoped regime is qualitatively distinct. In our theory, spectroscopy-fitted exponents directly probe the charged fluid's effective spatial nonlocality. Nonlocality shows that quantum criticality is not necessary to explain scale-covariant phenomena.

Among a huge variety of known two-dimensional materials, some of them have anisotropic crystal structures; examples include so different systems as a few-layer black phoshphorus (phosphorene), beryllium nitride BeN_4, van der Waals magnet CrSBr, rhenium dichalgogenides ReX_2. As a consequence, their optical and electronic properties turn out to be highly anisotropic as well. In some cases, the anisotropy results not just in a smooth renormalization of observable properties in comparison with the isotropic case but in the appearance of dramatically new physics. The examples are hyperbolic plasmons and excitons, strongly anisotropic ordering of adatoms at the surface of two-dimensional or van der Waals materials, essential change of transport and superconducting properties. Here, we present a systematic review of electronic structure, transport and optical properties of several representative groups of anisotropic two-dimensional materials including semiconductors, anisotropic Dirac and semi-Dirac materials, as well as superconductors.

EXAFS studies at the As K edge as a function of temperature have been carried out in SmFeAsO_{1-x}F_x (x = 0 and 0.2) compounds to understand the role of local structural distortions superconductivity observed in F doped compound. A significant correlation between thermal variation of local structural parameters like anion height and superconducting onset is found in the fluorinated compound. Such a variation in anion height is absent in non-superconducting compound. Increase in Fe-As bond distance just below superconducting onset temperature indicates a similarity in distortions observed in high T_C cuprates and these Fe based superconductors.

The Fermi-Hubbard model (FHM) is a cornerstone of modern condensed matter theory. Developed for interacting electrons in solids, which typically exhibit SU(2) symmetry, it describes a wide range of phenomena, such as metal to insulator transitions and magnetic order. Its generalized SU(N)-symmetric form, originally applied to multi-orbital materials such as transition-metal oxides, has recently attracted much interest owing to the availability of ultracold SU(N)-symmetric atomic gases. Here we report on a detailed experimental investigation of the SU(N)-symmetric FHM using local probing of an atomic gas of ytterbium in an optical lattice to determine the equation of state through different interaction regimes. We prepare a low-temperature SU(N)-symmetric Mott insulator and characterize the Mott crossover, representing important steps towards probing predicted novel SU(N)-magnetic phases.

Motivated by the recent experimental observation of the topological Anderson insulator in disordered atomic wires based on the Su-Schrieffer-Heeger (SSH) model, we study disorder effects on a dimerized Kitaev superconductor chain which is regarded as the superconductor version of the SSH model. By computing the real-space winding number and the zero-bias differential conductance, we analyze the topological phase transitions occurring in a dimerized Kitaev superconductor chain with disorder. It is found that disorder can induce a topologically nontrivial superconductor phase hosting Majorana zero modes (MZMs). We can regulate the appearance of disorder-induced MZMs by adjusting the dimerization parameter. Finally, we use the self-consistent Born approximation method to verify the numerical results.

Electron-electron (e-e) and electron-phonon (e-ph) interactions are challenging to describe in correlated materials, where their joint effects govern unconventional transport, phase transitions, and superconductivity. Here we combine first-principles e-ph calculations with dynamical mean field theory (DMFT) as a step toward a unified description of e-e and e-ph interactions in correlated materials. We compute the e-ph self-energy using the DMFT electron Green's function, and combine it with the e-e self-energy from DMFT to obtain a Green's function including both interactions. This approach captures the renormalization of quasiparticle dispersion and spectral weight on equal footing. Using our method, we study the e-ph and e-e contributions to the resistivity and spectral functions in the correlated metal Sr_2RuO_4. In this material, our results show that e-e interactions dominate transport and spectral broadening in the temperature range we study (50-310~K), while e-ph interactions are relatively weak and account for only sim10\% of the experimental resistivity. We also compute effective scattering rates, and find that the e-e interactions result in scattering several times greater than the Planckian value k_BT, whereas e-ph interactions are associated with scattering rates lower than k_BT. Our work demonstrates a first-principles approach to combine electron dynamical correlations from DMFT with e-ph interactions in a consistent way, advancing quantitative studies of correlated materials.

Naturally occurring background radiation is a source of correlated decoherence events in superconducting qubits that will challenge error-correction schemes. To characterize the radiation environment in an unshielded laboratory, we performed broadband, spectroscopic measurements of background events in silicon substrates located inside a millikelvin refrigerator, an environment representative of superconducting qubit systems. We measured the background spectra in silicon substrates of two thicknesses, 0.5 mm and 1.5 mm, and obtained the average event rate and the integrated power deposition. In a 25 mm^2 area and the thinner substrate, these values are 0.023 events per second and 4.9 keV/s, counting events that deposit at least 40 keV. We find the background spectrum to be nearly featureless. Its intensity decreases by a factor of 40,000 between 100 keV and 3 MeV for silicon substrates 0.5 mm thick. We find the cryogenic measurements to be in good agreement with predictions based on measurements of the terrestrial gamma-ray flux, published models of cosmic-ray fluxes, a crude model of the cryostat, and radiation-transport simulations. No free parameters are required to predict the background spectra in the silicon substrates. The good agreement between measurements and predictions allow assessment of the relative contributions of terrestrial and cosmic background sources and their dependence on substrate thickness. Our spectroscopic measurements are performed with superconducting microresonators that transduce deposited energy to a readily detectable electrical signal. We find that gamma-ray emissions from radioisotopes are responsible for the majority of events depositing E<1.5 MeV, while nucleons among the cosmic-ray secondary particles cause most events that deposit more energy. These results suggest several paths to reducing the impact of background radiation on quantum circuits.

Unconventional superconductivity can emerge in various forms in strongly correlated systems. Historically, the most extensively studied examples include nodal and triplet pairing, which were experimentally detected in cuprates and superfluid helium-3, respectively. Beyond these canonical cases, there are also nematic superconductors, in which the rotational symmetry of the lattice is broken in the superconducting state. While there are several examples of nematic superconductors whose pairing emerges inside a preexisting nematic normal state, experimental evidence for superconducting states that intrinsically break rotational symmetry on their own has been exceedingly scarce. Here, we report the experimental realization and identification of an intrinsic multi-component nodal nematic superconducting state in magic-angle twisted trilayer graphene (MATTG). By integrating tunneling spectroscopy with quantum transport measurements, we directly probe the symmetry of low-energy superconducting quasiparticles. Deep inside the superconducting state, we observe a pronounced two-fold anisotropy in the zero-bias tunneling conductance under an in-plane magnetic field, which is strongly suppressed together with superconductivity as the temperature or perpendicular magnetic field is increased. Remarkably, the major axis of anisotropy rotates by up to 90^{circ} across the superconducting dome, indicating an intrinsic, field- and density-tunable symmetry of the low-energy excitations. These behaviors imply a nodal superconducting state in MATTG that spontaneously breaks the six-fold rotational symmetry of the moiré superlattice. Our results establish moiré graphene as a versatile platform for realizing and interrogating nodal nematic superconductivity, opening a new avenue for exploring unconventional symmetry-breaking superconducting states in two-dimensional materials.

The recent realization of bulk superconductivity in the quintuple-layer nickelate La_6Ni_5O_{12} opens new opportunities to probe the pairing symmetry of the reduced Ruddlesden--Popper (RP) nickelate family. Using an effective five-layer Hubbard model and variational Monte Carlo calculations, we find that a spin-singlet d_{x^2-y^2}-wave state is energetically favored, while extended-s-wave pairing is strongly suppressed. Based on the optimized superconducting state, we further calculate several experimentally accessible observables. The tunneling density of states exhibits a characteristic V-shaped low-energy spectrum, the superfluid density shows a linear low-temperature depletion, the Knight shift decreases below T_c, and the spin-lattice relaxation rate follows 1/T_1Tpropto T^2, together providing consistent signatures of a clean nodal superconductor. Extending the same framework to related reduced RP nickelates, we find a robust d-wave tendency in infinite-layer LaNiO_{2}, while trilayer La_4Ni_3O_{8} at its nominal filling lies close to the boundary between d-wave superconductivity and a non-superconducting state. These results establish bulk La_6Ni_5O_{12} as a promising platform for determining the pairing symmetry of nickelate superconductors and suggest a common d_{x^2-y^2}-wave pairing tendency across the reduced RP nickelate family.

It stands to reason that the amount and the quality of data is of key importance for setting up accurate AI-driven models. Among others, a fundamental aspect to consider is the bias introduced during sample selection in database generation. This is particularly relevant when a model is trained on a specialized dataset to predict a property of interest, and then applied to forecast the same property over samples having a completely different genesis. Indeed, the resulting biased model will likely produce unreliable predictions for many of those out-of-the-box samples. Neglecting such an aspect may hinder the AI-based discovery process, even when high quality, sufficiently large and highly reputable data sources are available. In this regard, with superconducting and thermoelectric materials as two prototypical case studies in the field of energy material discovery, we present and validate a new method (based on a classification strategy) capable of detecting, quantifying and circumventing the presence of cross-domain data bias.

We theoretically investigate the superconducting phase and perpendicular Josephson supercurrent in twisted three-dimensional (3D) superconductors, where two layered 3D materials are stacked with a relative twist. We formulate the Bogoliubov-de Gennes Hamiltonian and develop a self-consistent method to calculate the superconducting order parameter and the resulting supercurrent. Applying this framework to a toy model with Fermi surfaces located near the Brillouin zone corners, we demonstrate a phase discontinuity at the twisted interface, indicating that a Josephson junction is formed purely by the twist. Our calculations reveal that the interface supports a finite critical current even when the Fermi surfaces of the two superconductors are completely separated, unlike in the case of a twisted normal-metal interface. We further show that the critical current can be effectively controlled by the twist angle, transitioning from a high-transparency regime at small angles to a low-transparency regime at larger angles.

The magnetization in a superconductor induced due to the inverse proximity effect is investigated in hybrid bilayers containing a superconductor and a ferromagnetic insulator or a strongly spin-polarized ferromagnetic metal. The study is performed within a quasiclassical Green function framework, wherein Usadel equations are solved with boundary conditions appropriate for strongly spin-polarized ferromagnetic materials. A comparison with recent experimental data is presented. The singlet to triplet conversion of the superconducting correlations as a result of the proximity effect with a ferromagnet is studied.

A new multiferroic material, CuBr2, is reported for the first time. CuBr2 has not only a high transition temperature (close to liquid nitrogen temperature) but also low dielectric loss and strong magnetoelectric coupling. These findings reveal the importance of anion effects in the search for the high temperature multiferroics materials among these low-dimensional spin systems.

scqubits is an open-source Python package for simulating and analyzing superconducting circuits. It provides convenient routines to obtain energy spectra of common superconducting qubits, such as the transmon, fluxonium, flux, cos(2ϕ) and the 0-π qubit. scqubits also features a number of options for visualizing the computed spectral data, including plots of energy levels as a function of external parameters, display of matrix elements of various operators as well as means to easily plot qubit wavefunctions. Many of these tools are not limited to single qubits, but extend to composite Hilbert spaces consisting of coupled superconducting qubits and harmonic (or weakly anharmonic) modes. The library provides an extensive suite of methods for estimating qubit coherence times due to a variety of commonly considered noise channels. While all functionality of scqubits can be accessed programatically, the package also implements GUI-like widgets that, with a few clicks can help users both create relevant Python objects, as well as explore their properties through various plots. When applicable, the library harnesses the computing power of multiple cores via multiprocessing. scqubits further exposes a direct interface to the Quantum Toolbox in Python (QuTiP) package, allowing the user to efficiently leverage QuTiP's proven capabilities for simulating time evolution.

As scanning tunneling microscopy is pushed towards fast local dynamics, a quantitative understanding of tunnel junctions under the influence of a fast AC driving signal is required, especially at the ultra-low temperatures relevant to spin dynamics and correlated electron states. We subject a superconductor-insulator-superconductor junction to a microwave signal from an antenna mounted in situ and examine the DC response of the contact to this driving signal. Quasi-particle tunneling and the Josephson effect can be interpreted in the framework of Tien-Gordon theory. The situation is more complex when it comes to higher order effects such as multiple Andreev reflections. Microwave assisted tunneling unravel these complex processes, providing deeper insights into tunneling than are available in a pure DC measurement.

The last few years have seen significant experimental progress in characterizing the copper-based hole-doped high temperature superconductors in the regime of low hole density, p. Quantum oscillations, NMR, X-ray, and STM experiments have shed much light on the nature of the ordering at low temperatures. We review evidence that the order parameter in the non-Lanthanum-based cuprates is a d-form factor density-wave. This novel order acts as an unexpected window into the electronic structure of the pseudogap phase at higher temperatures in zero field: we argue in favor of a `fractionalized Fermi liquid' (FL*) with 4 pockets of spin S=1/2, charge +e fermions enclosing an area specified by p.

The Casimir effect and superconductivity are foundational quantum phenomena whose interaction remains an open question in physics. How Casimir forces behave across a superconducting transition remains unresolved, owing to the experimental difficulty of achieving alignment, cryogenic environments, and isolating small changes from competing effects. This question carries implications for electron physics, quantum gravity, and high-temperature superconductivity. Here we demonstrate an on-chip superconducting platform that overcomes these challenges, achieving one of the most parallel Casimir configurations to date. Our microchip-based cavities achieve unprecedented area-to-separation ratio between plates, exceeding previous Casimir experiments by orders of magnitude and generating the strongest Casimir forces yet between compliant surfaces. Scanning tunneling microscopy (STM) is used for the first time to directly detect the resonant motion of a suspended membrane, with subatomic precision in both lateral positioning and displacement. Such precision measurements across a superconducting transition allow for the suppression of all van der Waals, electrostatic, and thermal effects. Preliminary measurements suggest superconductivity-dependent shifts in the Casimir force, motivating further investigation and comparison with theories. By uniting extreme parallelism, nanomechanics, and STM readout, our platform opens a new experimental frontier at the intersection of Casimir physics and superconductivity.

The discoveries of intrinsically magnetic topological materials, including semimetals with a large anomalous Hall effect and axion insulators, have directed fundamental research in solid-state materials. Topological quantum chemistry has enabled the understanding of and the search for paramagnetic topological materials. Using magnetic topological indices obtained from magnetic topological quantum chemistry (MTQC), here we perform a high-throughput search for magnetic topological materials based on first-principles calculations. We use as our starting point the Magnetic Materials Database on the Bilbao Crystallographic Server, which contains more than 549 magnetic compounds with magnetic structures deduced from neutron-scattering experiments, and identify 130 enforced semimetals (for which the band crossings are implied by symmetry eigenvalues), and topological insulators. For each compound, we perform complete electronic structure calculations, which include complete topological phase diagrams using different values of the Hubbard potential. Using a custom code to find the magnetic co-representations of all bands in all magnetic space groups, we generate data to be fed into the algorithm of MTQC to determine the topology of each magnetic material. Several of these materials display previously unknown topological phases, including symmetry-indicated magnetic semimetals, three-dimensional anomalous Hall insulators and higher-order magnetic semimetals. We analyse topological trends in the materials under varying interactions: 60 per cent of the 130 topological materials have topologies sensitive to interactions, and the others have stable topologies under varying interactions. We provide a materials database for future experimental studies and open-source code for diagnosing topologies of magnetic materials.

Dielectric materials, with high tunability at microwave frequencies, are key components in the design of microwave communication systems. Dense Ba0.6Sr0.4TiO3 (BST) ceramics, with different grain sizes, were prepared in order to optimise the dielectric tunability via polar nano cluster effects. Dielectric permittivity and loss measurements were carried at both high and low frequencies and were supported by results from X-ray powder diffraction, scanning and transmission electron microscopies, Raman spectroscopy and piezoresponse force microscopy. The concentration of polar nano clusters, whose sizes are found to be in the range 20 to 50 nm, and the dielectric tunability increase with increasing grain size. A novel method for measurement of the microwave tunability in bulk dielectrics is presented. The highest tunability of 32% is achieved in ceramics with an average grain size of 10 um. The tunability of BST ceramics with applied DC field is demonstrated in a prototype small resonant antenna.

We show that a simple gravitational theory can provide a holographically dual description of a superconductor. There is a critical temperature, below which a charged condensate forms via a second order phase transition and the (DC) conductivity becomes infinite. The frequency dependent conductivity develops a gap determined by the condensate. We find evidence that the condensate consists of pairs of quasiparticles.

The structural stability and phonon properties of SnSe/SnS superlattices at finite temperatures have been studied using machine learning force field molecular dynamics and the anharmonic phonon approach. The vertical SnSe/SnS superlattice undergoes a phase transition from the Pnma phase to a novel P4/nmm phase at finite temperatures, which is different from the high-temperature Cmcm phase of the SnSe and SnS systems. The stability of P4/nmm phase is determined by molecular dynamics trajectories and anharmonic phonon dispersion relations. The imaginary modes of TO modes at the q=M(1/2,1/2,0) point of the P4/nmm phase in harmonic approximation become rigid at elevated temperatures. An analysis of phonon power spectra upon temperature also confirms the dynamic stabilization. The P4/nmm phase has higher symmetry than the Pnma phase, and the phase transition between them is accompanied by competition between the Jahn-Teller effect and phonon anharmonicity. Unlike the anisotropic distribution of Sn-Se/S bonds in the Pnma phase, the P4/nmm phase forms chemical bonds with similar bond lengths both in-plane and interlayer, and their resonance effect can significantly enhance phonon scattering. The calculated phonon density of states and lifetime is strongly temperature dependent, demonstrating the heavy anharmonicity in the SnSe/SnS system. The P4/nmm phase has an extremely low lattice thermal conductivity, close to the experimental values of SnSe and SnS. Moreover, with the reduction of band gap and the enhancement of band degeneracy near the Fermi level, the P4/nmm phase exhibits superior electronic transport properties and significantly enhanced response to infrared and visible light. This makes it show great potential in thermoelectric and photovoltaic applications.

Superconducting systems may display different types of nonequilibrium states depending on the specific constraints imposed for measurement. We probe current-voltage relations of three-dimensional superconducting films by allowing finite voltages to develop across their length. Our experiments reveal sharp features of negative differential conductance which highlight the validity of the principle of minimum entropy production at the critical current transition. We have observed dissipative states with resistances intermediate between those of superconducting and normal phases at zero applied magnetic field, indicating a phenomenon of phase coexistence under nonequilibrium conditions. The features of steady states reported here are not accessible in conventional transport experiments with current-biasing methods.

We show how superconductors can be used to couple, initialize, and read out spatially separated spin qubits. When two single-electron quantum dots are tunnel coupled to the same superconductor, the singlet component of the two-electron state partially leaks into the superconductor via crossed Andreev reflection. This induces a gate-controlled singlet-triplet splitting which, with an appropriate superconductor geometry, remains large for dot separations within the superconducting coherence length. Furthermore, we show that when two double-dot singlet-triplet qubits are tunnel coupled to a superconductor with finite charging energy, crossed Andreev reflection enables a strong two-qubit coupling over distances much larger than the coherence length.

With copper-substituted lead apatite below room temperature, we observe diamagnetic dc magnetization under magnetic field of 25 Oe with remarkable bifurcation between zero-field-cooling and field-cooling measurements, and under 200 Oe it changes to be paramagnetism. A glassy memory effect is found during cooling. Typical hysteresis loops for superconductors are detected below 250 K, along with an asymmetry between forward and backward sweep of magnetic field. Our experiment suggests at room temperature the Meissner effect is possibly present in this material.

Topological flat bands (FBs) offer an ideal platform for realizing exotic topological phases, such as fractional Chern insulators, yet their realization with both exact flatness and stable topology in local lattice models has been long hindered by fundamental no-go theorems. Here, we overcome this barrier by demonstrating the existence of critical topological FBs (CTFBs) in finite-range hopping models. They saturate the no-go theorems via a unique structure of Bloch wavefunctions: While continuous over the whole Brillouin zone, the wavefunctions are non-analytic at isolated band touching points, thereby relaxing the inherent restrictions on the coexistence of exact flatness and stable topology. We establish a general principle to construct CTFBs, as well as their parent Hamiltonians, that carry desired topological invariants in given space groups. Explicit examples exhibiting Chern numbers, strong Z_2 index, and crystalline-symmetry-protected invariants in two and three dimensions are provided. Furthermore, an automated algorithm identifies more than 50,000 robust, symmetry-indicated CTFBs. Filling such CTFBs yields short-range entangled topological states that exhibit power-law correlations. Crucially, all filled CTFB states admit exact tensor-network representations with finite bond dimensions, providing a tractable starting point for exploring strongly correlated topological matter.

The study of twisted two-dimensional (2D) materials, where twisting layers create moiré superlattices, has opened new opportunities for investigating topological phases and strongly correlated physics. While systems such as twisted bilayer graphene (TBG) and twisted transition metal dichalcogenides (TMDs) have been extensively studied, the broader potential of a seemingly infinite set of other twistable 2D materials remains largely unexplored. In this paper, we define "theoretically twistable materials" as single- or multi-layer structures that allow for the construction of simple continuum models of their moiré structures. This excludes, for example, materials with a "spaghetti" of bands or those with numerous crossing points at the Fermi level, for which theoretical moiré modeling is unfeasible. We present a high-throughput algorithm that systematically searches for theoretically twistable semimetals and insulators based on the Topological 2D Materials Database. By analyzing key electronic properties, we identify thousands of new candidate materials that could host rich topological and strongly correlated phenomena when twisted. We propose representative twistable materials for realizing different types of moiré systems, including materials with different Bravais lattices, valleys, and strength of spin-orbital coupling. We provide examples of crystal growth for several of these materials and showcase twisted bilayer band structures along with simplified twisted continuum models. Our results significantly broaden the scope of moiré heterostructures and provide a valuable resource for future experimental and theoretical studies on novel moiré systems.

An isotropic antenna radiates and receives electromagnetic wave uniformly in magnitude in 3D space. A multi-frequency quasi-isotropic antenna can serve as a practically feasible solution to emulate an ideal multi-frequency isotropic radiator. It is also an essential technology for mobile smart devices for massive IoT in the upcoming 6G. However, ever since the quasi-isotropic antenna was proposed and achieved more than half a century ago, at most two discrete narrow frequency bands can be achieved, because of the significantly increased structural complexity from multi-frequency isotropic radiation. This limitation impedes numerous related electromagnetic experiments and the advances in wireless communication. Here, for the first time, a design method for multi-band (>2) quasi-isotropic antennas is proposed. An exemplified quasi-isotropic antenna with the desired four frequency bands is also presented for demonstration. The measured results validate excellent performance on both electromagnetics and wireless communications for this antenna.

Understanding the anharmonic phonon properties of crystal compounds -- such as phonon lifetimes and thermal conductivities -- is essential for investigating and optimizing their thermal transport behaviors. These properties also impact optical, electronic, and magnetic characteristics through interactions between phonons and other quasiparticles and fields. In this study, we develop an automated first-principles workflow to calculate anharmonic phonon properties and build a comprehensive database encompassing more than 6,000 inorganic compounds. Utilizing this dataset, we train a graph neural network model to predict thermal conductivity values and spectra from structural parameters, demonstrating a scaling law in which prediction accuracy improves with increasing training data size. High-throughput screening with the model enables the identification of materials exhibiting extreme thermal conductivities -- both high and low. The resulting database offers valuable insights into the anharmonic behavior of phonons, thereby accelerating the design and development of advanced functional materials.

It has been shown that a gravitational dual to a superconductor can be obtained by coupling anti-de Sitter gravity to a Maxwell field and charged scalar. We review our earlier analysis of this theory and extend it in two directions. First, we consider all values for the charge of the scalar field. Away from the large charge limit, backreaction on the spacetime metric is important. While the qualitative behaviour of the dual superconductor is found to be similar for all charges, in the limit of arbitrarily small charge a new type of black hole instability is found. We go on to add a perpendicular magnetic field B and obtain the London equation and magnetic penetration depth. We show that these holographic superconductors are Type II, i.e., starting in a normal phase at large B and low temperatures, they develop superconducting droplets as B is reduced.

Charge-density-wave (CDW) order is a ubiquitous feature of cuprate superconductors that competes with superconductivity. However, its behavior remains poorly understood in trilayer compounds, which contain the optimal number of CuO_2 layers for superconductivity. Here, we report Cu L_3- and O K-edge resonant inelastic x-ray scattering (RIXS) measurements of optimally-doped Bi_{2}Sr_{2}Ca_{2}Cu_{3}O_{10+δ} (Bi2223), the trilayer cuprate with the highest superconducting transition temperature (T_c) among Bi-based cuprates. We observe CDW order with a single in-plane wavevector of {bm q}_{CDW} = (0.25, 0), demonstrating that a coherent CDW order is formed across the trilayers. We also resolve CDW fluctuations emanating from the static order, whose profiles differ between the Cu L_3 and O K edges. The phonon softening occurs where these CDW fluctuations interact with the phonon branch, indicating that the RIXS phonon anomaly is driven by the coupling between CDW fluctuations and the phonon branch.

We investigate in more detail the holographic model of a superconductor recently found by Hartnoll, Herzog, and Horowitz [Phys. Rev. Lett. 101, 031601], which is constructed from a condensate of a charged scalar field in AdS_4-Schwarzschild background. By analytically studying the perturbation of the gravitational system near the critical temperature T_c, we obtain the superconducting coherence length proportional to 1/1-T/T_c via AdS/CFT correspondence. By adding a small external homogeneous magnetic field to the system, we find that a stationary diamagnetic current proportional to the square of the order parameter is induced by the magnetic field. These results agree with Ginzburg-Landau theory and strongly support the idea that a superconductor can be described by a charged scalar field on a black hole via AdS/CFT duality.

We present final results on the angular power spectrum of total intensity anisotropies in the CMB from the CBI. Our analysis includes all primordial anisotropy data collected between January 2000 and April 2005, and benefits significantly from an improved maximum likelihood analysis pipeline. It also includes results from a 30 GHz foreground survey conducted with the Green Bank Telescope (GBT) which places significant constraints on the possible contamination due to foreground point sources. We improve on previous CBI results by about a factor of two in the damping tail. These data confirm, at ~3-sigma, the existence of an excess of power over intrinsic CMB anisotropy on small angular scales (l > 1800). Using the GBT survey, we find currently known radio source populations are not capable of generating the power; a new population of faint sources with steeply rising spectral indices would be required to explain the excess with sources... We also present a full cosmological parameter analysis of the new CBI power spectrum... With CBI alone, the full parameter analysis finds the excess is 1.6-sigma above the level expected for a sigma_8=0.8 universe. We find the addition of high-l CMB data substantially improves constraints on cosmic string contributions to the TT power spectrum as well as the running of the scalar spectral index... We also present forecasts for what other experiments should see at different frequencies and angular resolutions given the excess power observed by CBI. We find that the reported high-l bandpowers from current high resolution CMB bolometer experiments are consistent with each other and CBI if the excess power is due to the SZE at the CBI-level of 2.5 +/- 1 times the sigma_8=0.8 standard SZ template. <Abridged>

The thermal properties are one of the key parameters to control phase purity and microstructure of polycrystalline materials. The melting point of the iron-based BaFe2As2 superconductor (Ba122), which foresees high-field applications, remains controversial. In this work, thermogravimetry-differential scanning calorimetry measurements (TG-DSC) of undoped and Co-doped Ba122 were carried out. Mixtures of elemental metals and pre-reacted Ba122 powders were prepared to investigate the thermal responses during in situ and ex situ synthesis routes, respectively. In addition, the phases and microstructures of the quenched samples were evaluated to elucidate the observed exothermic/endothermic peaks. Our results suggest that the melting point of Ba122 is ~1300°C.

We investigate the stability of superconducting strings as bound states of strings and fermion zero modes at both the classical and quantum levels. The dynamics of these superconducting strings can result in a stable configuration, known as a vorton. We mainly focus on global strings, but the majority of the discussion can be applied to local strings. Using lattice simulations, we study the classical dynamics of superconducting strings and confirm that they relax to the vorton configuration through Nambu-Goldstone boson radiation, with no evidence of over-shooting that would destabilize the vorton. We explore the tunneling of fermion zero modes out of the strings. Both our classical analysis and quantum calculations yield consistent results: the maximum energy of the zero mode significantly exceeds the fermion mass, in contrast to previous literature. Additionally, we introduce a world-sheet formalism to evaluate the decay rate of zero modes into other particles, which constitute the dominant decay channel. We also identify additional processes that trigger zero-mode decay due to non-adiabatic changes of the string configuration. In these decay processes, the rates are suppressed by the curvature of string loops, with exponential suppression for large masses of the final states. We further study the scattering with light charged particles surrounding the string core produced by the zero-mode current and find that a wide zero-mode wavefunction can enhance vorton stability.

These lectures give an introduction to the theory of holographic superconductors. These are superconductors that have a dual gravitational description using gauge/gravity duality. After introducing a suitable gravitational theory, we discuss its properties in various regimes: the probe limit, the effects of backreaction, the zero temperature limit, and the addition of magnetic fields. Using the gauge/gravity dictionary, these properties reproduce many of the standard features of superconductors. Some familiarity with gauge/gravity duality is assumed. A list of open problems is included at the end.

The spin density and Josephson current at equilibrium are studied numerically in a superconductor-normal metal-superconductor (SNS) junction with extrinsic spin-orbit interaction in the N segment. This system preserves structural inversion symmetry. We find that the Josephson current generates the spin Hall effect, resulting in an opposite spin density near the two edges of the N segment. We also find that a Zeeman magnetic field with gradient applied to the N segment generates an anomalous phase shift due to the inverse spin Hall effect, resulting in a diode effect when higher harmonics of the Josephson current are present. These results are consistent with those of a previous theoretical study based on diagrammatic perturbation theory. We find that the diode effect becomes more pronounced when stronger coupling between the N and S segments enhances the higher harmonics.

We have investigated the effects of strain on two-dimensional square lattices and examined the methods for inducing pseudo-magnetic fields. In both the columnar and staggered pi-flux square lattices, we have found that strain only modulates Fermi velocities rather than inducing pseudo-magnetic fields. However, spatially non-uniform on-site potentials (anisotropic hoppings) can create pseudo-magnetic fields in columnar (staggered) pi-flux square lattices. On the other hand, we demonstrate that strain does induce pseudo-magnetic fields in staggered zero-flux square lattices. By breaking a quarter of the bonds, we clarify that a staggered zero-flux square lattice is topologically equivalent to a honeycomb lattice and displays pseudo-vector potentials and pseudo-Landau levels at the Dirac points.

The one-dimensional J_1-J_2 q-state Potts model is solved exactly for arbitrary q, based on using OpenAI's latest reasoning model o3-mini-high to exactly solve the q=3 case. The exact results provide insights to outstanding physical problems such as the stacking of atomic or electronic orders in layered materials and the formation of a T_c-dome-shaped phase often seen in unconventional superconductors. The work is anticipated to fuel both the research in one-dimensional frustrated magnets for recently discovered finite-temperature application potentials and the fast moving topic area of AI for sciences.

Single-photon detectors based on the superconducting transition-edge sensor are used in a number of visible to near-infrared applications, particularly for photon-number-resolving measurements in quantum information science. To be practical for large-scale spectroscopic imaging or photonic quantum computing applications, the size of visible to near-infrared transition-edge sensor arrays and their associated readouts must be increased from a few pixels to many thousands. In this manuscript, we introduce the kinetic inductance current sensor, a scalable readout technology that exploits the nonlinear kinetic inductance in a superconducting resonator to make sensitive current measurements. Kinetic inductance current sensors can replace superconducting quantum interference devices for many applications because of their ability to measure fast, high slew-rate signals, their compatibility with standard microwave frequency-division multiplexing techniques, and their relatively simple fabrication. Here, we demonstrate the readout of a visible to near-infrared transition-edge sensor using a kinetic inductance current sensor with 3.7 MHz of bandwidth. We measure a readout noise of 1.4 pA/text{Hz}, considerably below the detector noise at frequencies of interest, and an energy resolution of (0.137 pm 0.001) eV at 0.8 eV, comparable to resolutions observed with non-multiplexed superconducting quantum interference device readouts.

We consider holographic superconductors whose bulk description consists of gravity minimally coupled to a Maxwell field and charged scalar field with general potential. We give an analytic argument that there is no "hard gap": the real part of the conductivity at low frequency remains nonzero (although typically exponentially small) even at zero temperature. We also numerically construct the gravitational dual of the ground state of some holographic superconductors. Depending on the charge and dimension of the condensate, the infrared theory can have emergent conformal or just Poincare symmetry. In all cases studied, the area of the horizon of the dual black hole goes to zero in the extremal limit, consistent with a nondegenerate ground state.

The Kohn-Luttinger mechanism for unconventional superconductivity (SC) driven by weak repulsive electron-electron interactions on a periodic lattice is generalized to the quasicrystal (QC) via a real-space perturbative approach. The repulsive Hubbard model on the Penrose lattice is studied as an example, on which a classification of the pairing symmetries is performed and a pairing phase diagram is obtained. Two remarkable properties of these pairing states are revealed, due to the combination of the presence of the point-group symmetry and the lack of translation symmetry on this lattice. Firstly, the spin and spacial angular momenta of a Cooper pair is de-correlated: for each pairing symmetry, both spin-singlet and spin-triplet pairings are possible even in the weak-pairing limit. Secondly, the pairing states belonging to the 2D irreducible representations of the D_5 point group can be time-reversal-symmetry-breaking topological SCs carrying spontaneous bulk super current and spontaneous vortices. These two remarkable properties are general for the SCs on all QCs, and are rare on periodic lattices. Our work starts the new area of unconventional SCs driven by repulsive interactions on the QC.

Accurate determination of qubit parameters is critical for the successful implementation of quantum information and computation applications. In solid state systems, the parameters of individual qubits vary across the entire system, requiring time consuming measurements and manual fitting processes for characterization. Recent developed superconducting qubits, such as fluxonium or 0-pi qubits, offer improved fidelity operations but exhibit a more complex physical and spectral structure, complicating parameter extraction. In this work, we propose a machine learning (ML)based methodology for the automatic and accurate characterization of fluxonium qubit parameters. Our approach utilized the energy spectrum calculated by a model Hamiltonian with various magnetic fields, as training data for the ML model. The output consists of the essential fluxonium qubit energy parameters, EJ, EC, and EL in Hamiltonian. The ML model achieves remarkable accuracy (with an average accuracy 95.6%) as an initial guess, enabling the development of an automatic fitting procedure for direct application to realistic experimental data. Moreover, we demonstrate that similar accuracy can be retrieved even when the input experimental spectrum is noisy or incomplete, highlighting the model robustness. These results suggest that our automated characterization method, based on a transfer learning approach, provides a reliable framework for future extensions to other superconducting qubits or different solid-state systems. Ultimately, we believe this methodology paves the way for the construction of large-scale quantum processors.

Developing the field of neuromorphic quantum computing necessitates designing scalable quantum memory devices. Here, we propose a superconducting quantum memory device in the microwave regime, termed as a microwave quantum memcapacitor. It comprises two linked resonators, the primary one is coupled to a Superconducting Quantum Interference Device, which allows for the modulation of the resonator properties through external magnetic flux. The auxiliary resonator, operated through weak measurements, provides feedback to the primary resonator, ensuring stable memory behaviour. This device operates with a classical input in one cavity while reading the response in the other, serving as a fundamental building block toward arrays of microwave quantum memcapacitors. We observe that a bipartite setup can retain its memory behaviour and gains entanglement and quantum correlations. Our findings pave the way for the experimental implementation of memcapacitive superconducting quantum devices and memory device arrays for neuromorphic quantum computing.

Correlated electron systems are among the centerpieces of modern condensed matter sciences, where many interesting physical phenomena, such as metal-insulator transition and high-Tc superconductivity appear. Recent efforts have been focused on electrostatic doping of such materials to probe the underlying physics without introducing disorder as well as to build field-effect transistors that may complement conventional semiconductor metal-oxide-semiconductor field effect transistor (MOSFET) technology. This review focuses on metal-insulator transition mechanisms in correlated electron materials and three-terminal field effect devices utilizing such correlated oxides as the channel layer. We first describe how electron-disorder interaction, electron-phonon interaction and/or electron correlation in solids could modify the electronic properties of materials and lead to metal-insulator transitions. Then we analyze experimental efforts toward utilizing these transitions in field effect transistors and their underlying principles. It is pointed out that correlated electron systems show promise among these various materials displaying phase transitions for logic technologies. Furthermore, novel phenomena emerging from electronic correlation could enable new functionalities in field effect devices. We then briefly review unconventional electrostatic gating techniques, such as ionic liquid gating and ferroelectric gating, which enables ultra large carrier accumulation density in the correlated materials which could in turn lead to phase transitions. The review concludes with a brief discussion on the prospects and suggestions for future research directions in correlated oxide electronics for information processing.

The NMR measurements performed on a single orthorhombic crystal of superconducting ferromagnet UCoGe (Y.Ihara et al, Phys. Rev. Lett. v.105, 206403 (2010)) demonstrate strongly anisotropic magnetic properties of this material. The presented calculations allow to establish the dependence of longitudinal spin-lattice relaxation rate from temperature and magnetic field. The value 1/T_1T in field perpendicular to spontaneous magnetisation directed along c-axis has maximum in vicinity of Curie temperature whereas it does not reveal similar behaviour in field parallel to the direction of spontaneous magnetisation. Also there was shown that the longitudinal spin-lattice relaxation rate is strongly field dependent when the field directed in b-crystallographic direction but field independent if magnetic field is oriented along a-axis.

Molecular ferroelectric materials have attracted widespread attention due to their abundant chemical diversity, structural tunability, low synthesis temperature, and high flexibility. Meanwhile, the integration of molecular ferroelectric materials and Si is still challenging, while the fundamental understanding of the ferroelectric switching process is still lacking. Herein, we have successfully synthesized the imidazole perchlorate (ImClO4) single crystals and a series of high-quality highly-oriented thin films on a Si substrate. A high inverse piezoelectric coefficient (55.7 pm/V) is demonstrated for the thin films. Two types of domain bands can be observed (in the size of a few microns): type-I band tilts ~60{\deg} with respect to the horizontal axis, while the type-II band is perpendicular to the horizontal axis. Most of the domain walls (DWs) are 180{\deg} DWs for the two bands, while some 109{\deg} DWs can also be observed. Interestingly, the DWs in type-I band are curved, charged domain walls; while the 180{\deg} DWs in type-II band are straight, noncharged domain walls. After applying +20 V for 5 s through a PFM tip, the 180{\deg} DWs in type-I band shrink first, then disconnect from the band boundary, forming a needle-like domain with a size of ~100 nm. The needle-like domain will extend toward the band boundary after an inverse bias is applied (-20 V), and expand along the band boundary after touching the boundary. Whereas for the type-II domain band, the 180{\deg} DWs are more mobile than the 109{\deg} domain walls, which displaces ~500 nm after applying +20 V. While such displacement is much shorter after the application of a negative bias for the same duration, starting from the positively poled sample. We hope to spur further interest in the on-chip design of the molecular ferroelectrics based electronic devices.

Quantum microwave transmission is key to realizing modular superconducting quantum computers and distributed quantum networks. A large number of incoherent photons are thermally generated within the microwave frequency spectrum. The closeness of the transmitted quantum state to the source-generated quantum state at the input of the transmission link (measured by the transmission fidelity) degrades due to the presence of the incoherent photons. Hence, high-fidelity quantum microwave transmission has long been considered to be infeasible without refrigeration [3,4]. In this study, we propose a novel method for high-fidelity quantum microwave transmission using a room-temperature lossy waveguide. The proposed scheme consists of connecting two cryogenic nodes (i.e., a transmitter and a receiver) by the room-temperature lossy microwave waveguide. First, cryogenic preamplification is implemented prior to transmission. Second, at the receiver side, a cryogenic loop antenna is placed inside the output port of the waveguide and coupled to an LC harmonic oscillator located outside the waveguide. The loop antenna converts quantum microwave fields (which contain both signal and noise photons) to a quantum voltage across the coupled LC harmonic oscillator. The loop antenna detector at the receiver is designed to extensively suppress the induced photons across the LC oscillator. The signal transmittance is maintained intact by providing significant preamplification gain. Our calculations show that high-fidelity quantum transmission (i.e., more than 95%) is realized based on the proposed scheme for transmission distances reaching 100 m.

In 2021 Nature Physics published a paper by Vaitiekenas, Liu, Krogstrup and Marcus titled "Zero-bias peaks at zero magnetic field in ferromagnetic hybrid nanowires". The paper reports low temperature transport measurements on semiconductor InAs nanowires with two partly overlapping shells -- a shell of EuS, a magnetic insulator, and a shell of Al, a metal that becomes superconducting at temperatures below 1.2K. The paper claims that (1) the data are consistent with induced topological superconductivity and Majorana zero modes (MZMs), and (2) that this is facilitated by the breaking of the time reversal symmetry through a direct magnetic interaction with the EuS shell. In this Matters Arising, we present an alternative explanation which is based on trivial effects that are likely to appear in the reported geometry. Specifically, first, we find that data the authors present in support of the topological superconductivity claim can originate from unintended quantum dots in their devices, a widely known likely explanation that is not being discussed in the paper. Second, our analysis of the setup, supported by our numerical micromagnetic simulations, shows similar effects could be obtained due to stray magnetic fields from the region of the EuS shell damaged during Al etching. This basic picture should come before the exotic interpretation in terms of magnetic exchange interaction with a ferromagnetic insulator.

We study the effects of a superconducting condensate on holographic Fermi surfaces. With a suitable coupling between the fermion and the condensate, there are stable quasiparticles with a gap. We find some similarities with the phenomenology of the cuprates: in systems whose normal state is a non-Fermi liquid with no stable quasiparticles, a stable quasiparticle peak appears in the condensed phase.

We present a comprehensive numerical study of a six-state clock model with a long-range dipolar type interaction. This model is motivated by the ferroelectric orders in the multiferroic hexagonal manganites. At low temperatures, trimerization of local atomic structures leads to six distinct but energetically degenerate structural distortion, which can be modeled by a six-state clock model. Moreover, the atomic displacements in the trimerized state further produce a local electric polarization whose sign depends on whether the clock variable is even or odd. These induced electric dipoles, which can be modeled by emergent Ising degrees of freedom, interact with each other via long-range dipolar interactions. Extensive Monte Carlo simulations are carried out to investigate low temperature phases resulting from the competing interactions. Upon lowering temperature, the system undergoes two Berezinskii-Kosterlitz-Thouless (BKT) transitions, characteristic of the standard six-state clock model in two dimensions. The dipolar interaction between emergent Ising spins induces a first-order transition into a ground state characterized by a three-fold degenerate stripe order. The intermediate phase between the discontinuous and the second BKT transition corresponds to a maze-like hexagonal liquid with short-range stripe ordering. Moreover, this intermediate phase also exhibits an unusual ferromagnetic order with two adjacent clock variables occupying the two types of stripes of the labyrinthine pattern.

The inhomogeneous magnetic stray field of micromagnets has been extensively used to manipulate electron spin qubits. By means of micromagnetic simulations and scanning superconducting quantum interference device microscopy, we show that the polycrystallinity of the magnet and non-uniform magnetization significantly impact the stray field and corresponding qubit properties. We find that the random orientation of the crystal axis in polycrystalline Co magnets alters the qubit frequencies by up to 0.5 GHz, compromising single qubit addressability and single gate fidelities. We map the stray field of Fe micromagnets with an applied magnetic field of up to 500 mT (mimicking conditions when operating qubits), finding field gradients above 1 mT/nm. The measured gradients and the lower magnetocrystalline anisotropy of Fe demonstrate the advantage of using Fe instead of Co for magnets in spin qubit devices. These properties of Fe also enabled us to design a 2D arrangement of nanomagnets for driving spin qubits distributed on a 2D lattice.

η pairing describes a staggered superconducting condensate whose order parameter changes sign between neighboring unit cells while maintaining a uniform magnitude. Nearly four decades after its theoretical proposal by C. N. Yang, a material platform for stabilizing η pairing has remained elusive. Here, we reveal that altermagnetism, despite being pair breaking for conventional BCS pairing, naturally favors η-like pairing in V_2Se_2O-family altermagnets. Their valley-contrasting spin structure gives rise to oppositely spin-polarized, symmetry-related valleys centered at X=(π,0) and Y=(0,π), which form spin-singlet pairing partners separated by the commensurate momentum mathbf Q=(π,π), thereby favoring an η-like condensate. Self-consistent calculations demonstrate that the resulting η-like state remains robust over broad variations of chemical potential, hopping parameters, and Fermi-surface topology. To detect this hidden staggered order, we propose a phase-sensitive Josephson measurement with a uniform superconductor, where destructive interference suppresses single-Cooper-pair tunneling while preserving two-Cooper-pair processes. This constitutes a charge-4e-like Josephson response despite a bulk condensate composed of charge-2e Cooper pairs, providing a direct phase-sensitive signature of the otherwise elusive η-like condensate in V_2Se_2O-family altermagnets.

Bound states in the continuum (BIC) metasurfaces are typically described by geometry-specific parameters, hindering cross-geometry comparison, while ultranarrow qBIC features are easily diluted in full-spectrum learning. Here, 2015 samples from seven dielectric metasurface families are mapped to a shared reciprocal-lattice grid, where two frozen low-order Fourier channels capture resonance shifts with mean within-branch R^2 values of 0.871-0.999. Field-level analysis of two representative branches further confirms that these shifts are consistent with the Maxwell-Fourier perturbation picture. A five-channel K-space backbone models the broadband spectrum, while a local complex K-space expert parameterizes the qBIC resonance through a differentiable Fano layer. The expert reduces resonance-position mean absolute error (MAE) from 3.2 to 0.95 nm and the resonance-depth error by 14-fold on a geometry-blocked test set. The same coordinate supports spectrum-to-structure reconstruction.

We point out that there are two different chiral spin liquid states on the triangular lattice and discuss the conducting states that are expected on doping them. These states labeled CS1 and CS2 are associated with two distinct topological orders with different edge states, although they both spontaneously break time reversal symmetry and exhibit the same quantized spin Hall conductance. While CSL1 is related to the Kalmeyer-Laughlin state, CSL2 is the ν=4 member of Kitaev's 16 fold way classification. Both states are described within the Abrikosov fermion representation of spins, and the effect of doping can be accessed by introducing charged holons. On doping CSL2, condensation of charged holons leads to a topological d+id superconductor. However on doping CSL1 , in sharp contrast , two different scenarios can arise: first, if holons condense, a chiral metal with doubled unit cell and finite Hall conductivity is obtained. However, in a second novel scenario, the internal magnetic flux adjusts with doping and holons form a bosonic integer quantum Hall (BIQH) state. Remarkably, the latter phase is identical to a d+id superconductor. In this case the Mott insulator to superconductor transition is associated with a bosonic variant of the integer quantum Hall plateau transition for the holon. We connect the above two scenarios to two recent numerical studies of doped chiral spin liquids on triangular lattice. Our work clarifies the complex relation between topological superconductors, chiral spin liquids and quantum criticality .

Developing accurate, transferable and computationally inexpensive machine learning models can rapidly accelerate the discovery and development of new materials. Some of the major challenges involved in developing such models are, (i) limited availability of materials data as compared to other fields, (ii) lack of universal descriptor of materials to predict its various properties. The limited availability of materials data can be addressed through transfer learning, while the generic representation was recently addressed by Xie and Grossman [1], where they developed a crystal graph convolutional neural network (CGCNN) that provides a unified representation of crystals. In this work, we develop a new model (MT-CGCNN) by integrating CGCNN with transfer learning based on multi-task (MT) learning. We demonstrate the effectiveness of MT-CGCNN by simultaneous prediction of various material properties such as Formation Energy, Band Gap and Fermi Energy for a wide range of inorganic crystals (46774 materials). MT-CGCNN is able to reduce the test error when employed on correlated properties by upto 8%. The model prediction has lower test error compared to CGCNN, even when the training data is reduced by 10%. We also demonstrate our model's better performance through prediction of end user scenario related to metal/non-metal classification. These results encourage further development of machine learning approaches which leverage multi-task learning to address the aforementioned challenges in the discovery of new materials. We make MT-CGCNN's source code available to encourage reproducible research.

Berry curvature physics and quantum geometric effects have been instrumental in advancing topological condensed matter physics in recent decades. Although Landau level-based flat bands and conventional 3D solids have been pivotal in exploring rich topological phenomena, they are constrained by their limited ability to undergo dynamic tuning. In stark contrast, moiré systems have risen as a versatile platform for engineering bands and manipulating the distribution of Berry curvature in momentum space. These moiré systems not only harbor tunable topological bands, modifiable through a plethora of parameters, but also provide unprecedented access to large length scales and low energy scales. Furthermore, they offer unique opportunities stemming from the symmetry-breaking mechanisms and electron correlations associated with the underlying flat bands that are beyond the reach of conventional crystalline solids. A diverse array of tools, encompassing quantum electron transport in both linear and non-linear response regimes and optical excitation techniques, provide direct avenues for investigating Berry physics. This review navigates the evolving landscape of tunable moiré materials, highlighting recent experimental breakthroughs in the field of topological physics. Additionally, we delineate several challenges and offer insights into promising avenues for future research.