new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Apr 1

Turbulence modulation in liquid-liquid two-phase Taylor-Couette turbulence

We investigate the coupling effects of the two-phase interface, viscosity ratio, and density ratio of the dispersed phase to the continuous phase on the flow statistics in two-phase Taylor-Couette turbulence at a system Reynolds number of 6000 and a system Weber number of 10 using interface-resolved three-dimensional direct numerical simulations with the volume-of-fluid method. Our study focuses on four different scenarios: neutral droplets, low-viscosity droplets, light droplets, and low-viscosity light droplets. We find that neutral droplets and low-viscosity droplets primarily contribute to drag enhancement through the two-phase interface, while light droplets reduce the system's drag by explicitly reducing Reynolds stress due to the density dependence of Reynolds stress. Additionally, low-viscosity light droplets contribute to greater drag reduction by further reducing momentum transport near the inner cylinder and implicitly reducing Reynolds stress. While interfacial tension enhances turbulent kinetic energy (TKE) transport, drag enhancement is not strongly correlated with TKE transport for both neutral droplets and low-viscosity droplets. Light droplets primarily reduce the production term by diminishing Reynolds stress, whereas the density contrast between the phases boosts TKE transport near the inner wall. Therefore, the reduction in the dissipation rate is predominantly attributed to decreased turbulence production, causing drag reduction. For low-viscosity light droplets, the production term diminishes further, primarily due to their greater reduction in Reynolds stress, while reduced viscosity weakens the density difference's contribution to TKE transport near the inner cylinder, resulting in a more pronounced reduction in the dissipation rate and consequently stronger drag reduction. Our findings provide new insights into the turbulence modulation in two-phase flow.

  • 6 authors
·
Jul 1, 2024

The Rayleigh-Boltzmann equation with shear deformations in the hyperbolic-dominated regime

In this paper we consider a particular class of solutions of the Rayleigh-Boltzmann equation, known in the nonlinear setting as homoenergetic solutions, which have the form gleft( x,v,t right) =fleft( v-Lleft( tright)x,tright) where the matrix L(t) describes a shear flow deformation. We began this analysis in [22] where we rigorously proved the existence of a stationary non-equilibrium solution and established the different behaviour of the solutions for small and large values of the shear parameter, for cut-off collision kernels with homogeneity parameter 0leq gamma <1, including Maxwell molecules and hard potentials. In this paper, we concentrate in the case where the deformation term dominates the collision term for large times (hyperbolic-dominated regime). This occurs for collision kernels with gamma < 0 and in particular we focus on gamma in (-1,0). In such a hyperbolic-dominated regime, it appears challenging to provide a clear description of the long-term asymptotics of the solutions. Here we present a formal analysis of the long-time asymptotics for the distribution of velocities and provide the explicit form for the asymptotic profile. Additionally, we discuss the different asymptotic behaviour expected in the case of homogeneity gamma < -1. Furthermore, we provide a probabilistic interpretation describing a stochastic process consisting in a combination of collisions and shear flows. The tagged particle velocity {v(t)}_{tgeq 0} is a Markov process that arises from the combination of free flights in a shear flow along with random jumps caused by collisions.

  • 3 authors
·
Jun 18, 2025

Small-scale proxies for large-scale Transformer training instabilities

Teams that have trained large Transformer-based models have reported training instabilities at large scale that did not appear when training with the same hyperparameters at smaller scales. Although the causes of such instabilities are of scientific interest, the amount of resources required to reproduce them has made investigation difficult. In this work, we seek ways to reproduce and study training stability and instability at smaller scales. First, we focus on two sources of training instability described in previous work: the growth of logits in attention layers (Dehghani et al., 2023) and divergence of the output logits from the log probabilities (Chowdhery et al., 2022). By measuring the relationship between learning rate and loss across scales, we show that these instabilities also appear in small models when training at high learning rates, and that mitigations previously employed at large scales are equally effective in this regime. This prompts us to investigate the extent to which other known optimizer and model interventions influence the sensitivity of the final loss to changes in the learning rate. To this end, we study methods such as warm-up, weight decay, and the muParam (Yang et al., 2022), and combine techniques to train small models that achieve similar losses across orders of magnitude of learning rate variation. Finally, to conclude our exploration we study two cases where instabilities can be predicted before they emerge by examining the scaling behavior of model activation and gradient norms.

  • 16 authors
·
Sep 25, 2023 2

Modeling transport in weakly collisional plasmas using thermodynamic forcing

How momentum, energy, and magnetic fields are transported in the presence of macroscopic gradients is a fundamental question in plasma physics. Answering this question is especially challenging for weakly collisional, magnetized plasmas, where macroscopic gradients influence the plasma's microphysical structure. In this paper, we introduce thermodynamic forcing, a new method for systematically modeling how macroscopic gradients in magnetized or unmagnetized plasmas shape the distribution functions of constituent particles. In this method, we propose to apply an anomalous force to those particles inducing the anisotropy that would naturally emerge due to macroscopic gradients in weakly collisional plasmas. We implement thermodynamic forcing in particle-in-cell (TF-PIC) simulations using a modified Vay particle pusher and validate it against analytic solutions of the equations of motion. We then carry out a series of simulations of electron-proton plasmas with periodic boundary conditions using TF-PIC. First, we confirm that the properties of two electron-scale kinetic instabilities -- one driven by a temperature gradient and the other by pressure anisotropy -- are consistent with previous results. Then, we demonstrate that in the presence of multiple macroscopic gradients, the saturated state can differ significantly from current expectations. This work enables, for the first time, systematic and self-consistent transport modeling in weakly collisional plasmas, with broad applications in astrophysics, laser-plasma physics, and inertial confinement fusion.

  • 2 authors
·
Apr 18, 2025

Bell Instability and Cosmic-Ray Acceleration in AGN Ultrafast Outflow Shocks

We investigate magnetic-field amplification driven by the nonresonant hybrid (NRH or Bell) instability and its impact on cosmic-ray (CR) acceleration at reverse shocks of ultrafast outflows (UFOs) from active galactic nuclei (AGN). Previous kinetic studies by particle-in-cell simulations have demonstrated that when maximum CR energy is near the injection scale, NRH instability efficiently amplifies magnetic field up to the saturation level. However, the efficiency of NRH instability goes down as maximum energy increase since CR current is carried by escaping CRs near the maximum energy. We employ a one-dimensional MHD--CR framework solving telegraph-type diffusion--convection equations to trace the coupled evolution of CRs, magnetic fields, and shock dynamics under realistic parameters. We find a distinct transition with magnetic field strength: for weak background fields (B_{0}!lesssim!10^{-4},G), NRH instability efficiently amplifies upstream turbulence, driving a self-regulated state where E_{max} becomes independent of initial strength of magnetic turbulence. In contrast, for stronger background fields (B_{0}!gtrsim!10^{-3},G), the escaping CR current is too weak to drive NRH instability, and magnetic turbulence further decays through parametric instabilities, potentially reducing the acceleration efficiency. We give the physical interpretation for the transition and discuss conditions for PeV--EeV acceleration at UFO reverse shocks.

  • 2 authors
·
Oct 15, 2025

Coherent Structures Governing Transport at Turbulent Interfaces

In an experiment on a turbulent jet, we detect interfacial turbulent layers in a frame that moves, on average, along with the \tnti. This significantly prolongs the observation time of scalar and velocity structures and enables the measurement of two types of Lagrangian coherent structures. One structure, the finite-time Lyapunov field (FTLE), quantifies advective transport barriers of fluid parcels while the other structure highlights barriers of diffusive momentum transport. These two complementary structures depend on large-scale and small-scale motion and are therefore associated with the growth of the turbulent region through engulfment or nibbling, respectively. We detect the \tnti\ from cluster analysis, where we divide the measured scalar field into four clusters. Not only the \tnti\ can be found this way, but also the next, internal, turbulent-turbulent interface. Conditional averages show that these interfaces are correlated with barriers of advective and diffusive transport when the Lagrangian integration time is smaller than the integral time scale. Diffusive structures decorrelate faster since they have a smaller timescale. Conditional averages of these structures at internal turbulent-turbulent interfaces show the same pattern with a more pronounced jump at the interface indicative of a shear layer. This is quite an unexpected outcome, as the internal interface is now defined not by the presence or absence of vorticity, but by conditional vorticity corresponding to two uniform concentration zones. The long-time diffusive momentum flux along Lagrangian paths represents the growth of the turbulent flow into the irrotational domain, a direct demonstration of nibbling. The diffusive flux parallel to the \tnti\ appears to be concentrated in a diffusive superlayer whose width is comparable with the Taylor microscale, which is relatively invariant in time.

  • 5 authors
·
Dec 17, 2024

Stochastic acceleration in arbitrary astrophysical environments

Turbulent magnetic fields are to some extent a universal feature in astrophysical phenomena. Charged particles that encounter these turbulence get on average accelerated according to the so-called second-order Fermi process. However, in most astrophysical environments there are additional competing processes, such as different kinds of first-order energy changes and particle escape, that effect the resulting momentum distribution of the particles. In this work we provide to our knowledge the first semi-analytical solution of the isotropic steady-state momentum diffusion equation including continuous and catastrophic momentum changes that can be applied to any arbitrary astrophysical system of interest. Here, we adopt that the assigned magnetic turbulence is constrained on a finite range and the particle flux vanishes beyond these boundaries. Consequently, we show that the so-called pile-up bump -- that has for some special cases long been established -- is a universal feature of stochastic acceleration that emerges around the momentum chi_{rm eq} where acceleration and continuous loss are in equilibrium if the particle's residence time in the system is sufficient at chi_{rm eq}. In general, the impact of continuous and catastrophic momentum changes plays a crucial role in the shape of the steady-state momentum distribution of the accelerated particles, where simplified unbroken power-law approximations are often not adequate.

  • 2 authors
·
Nov 22, 2024

Nonlinear dynamics of a chemically-active drop: from steady to chaotic self-propulsion

Individual chemically active drops suspended in a surfactant solution were observed to self-propel spontaneously with straight, helical, or chaotic trajectories. To elucidate how these drops can exhibit such strikingly different dynamics and `decide' what to do, we propose a minimal axisymmetric model of a spherical active drop, and show that simple and linear interface properties can lead to both steady self-propulsion of the droplet as well as chaotic behavior. The model includes two different mobility mechanisms, namely, diffusiophoresis and the Marangoni effect, that convert self-generated gradients of surfactant concentration into the flow at the droplet surface. In turn, surface-driven flow initiates surfactant advection that is the only nonlinear mechanism and, thus, the only source of dynamical complexity in our model. Numerical investigation of the fully-coupled hydrodynamic and advection diffusion problems reveals that strong advection (e.g., large droplet size) may destabilize a steadily self-propelling drop; once destabilized, the droplet spontaneously stops and a symmetric extensile flow emerges. If advection is strengthened even further in comparison with molecular diffusion, the droplet may perform chaotic oscillations. Our results indicate that the thresholds of these instabilities depend heavily on the balance between diffusiophoresis and the Marangoni effect. Using linear stability analysis, we demonstrate that diffusiophoresis promotes the onset of high-order modes of monotonic instability of the motionless drop. We argue that diffusiophoresis has a similar effect on the instabilities of a moving drop.

  • 2 authors
·
Jan 8, 2019

"I May Not Have Articulated Myself Clearly": Diagnosing Dynamic Instability in LLM Reasoning at Inference Time

Reasoning failures in large language models (LLMs) are typically measured only at the end of a generation, yet many failures manifest as a process-level breakdown: the model "loses the thread" mid-reasoning. We study whether such breakdowns are detectable from inference-time observables available in standard APIs (token log probabilities), without any training or fine-tuning. We define a simple instability signal that combines consecutive-step distributional shift (JSD) and uncertainty (entropy), summarize each trace by its peak instability strength, and show that this signal reliably predicts failure. Across GSM8K and HotpotQA, instability strength predicts wrong answers with above-chance AUC and yields monotonic bucket-level accuracy decline at scale across model sizes. Crucially, we show that instability is not uniformly harmful: early instability can reflect subsequent stabilization and a correct final answer (corrective instability), whereas late instability is more often followed by failure (destructive instability), even at comparable peak magnitudes, indicating that recoverability depends not only on how strongly the distribution changes but also on when such changes occur relative to the remaining decoding horizon. The method is model-agnostic, training-free, and reproducible, and is presented as a diagnostic lens rather than a corrective or control mechanism.

  • 4 authors
·
Feb 2 3

DRIFT-Net: A Spectral--Coupled Neural Operator for PDEs Learning

Learning PDE dynamics with neural solvers can significantly improve wall-clock efficiency and accuracy compared with classical numerical solvers. In recent years, foundation models for PDEs have largely adopted multi-scale windowed self-attention, with the scOT backbone in Poseidon serving as a representative example. However, because of their locality, truly globally consistent spectral coupling can only be propagated gradually through deep stacking and window shifting. This weakens global coupling and leads to error accumulation and drift during closed-loop rollouts. To address this, we propose DRIFT-Net. It employs a dual-branch design comprising a spectral branch and an image branch. The spectral branch is responsible for capturing global, large-scale low-frequency information, whereas the image branch focuses on local details and nonstationary structures. Specifically, we first perform controlled, lightweight mixing within the low-frequency range. Then we fuse the spectral and image paths at each layer via bandwise weighting, which avoids the width inflation and training instability caused by naive concatenation. The fused result is transformed back into the spatial domain and added to the image branch, thereby preserving both global structure and high-frequency details across scales. Compared with strong attention-based baselines, DRIFT-Net achieves lower error and higher throughput with fewer parameters under identical training settings and budget. On Navier--Stokes benchmarks, the relative L_{1} error is reduced by 7\%--54\%, the parameter count decreases by about 15\%, and the throughput remains higher than scOT. Ablation studies and theoretical analyses further demonstrate the stability and effectiveness of this design. The code is available at https://github.com/cruiseresearchgroup/DRIFT-Net.

Morphological evolution and galactic sizes in the L-Galaxies SA model

In this work we update the L-Galaxies semi-analytic model (SAM) to better follow the physical processes responsible for the growth of bulges via disc instabilities (leading to pseudo-bulges) and mergers (leading to classical bulges). We address the former by considering the contribution of both stellar and gaseous discs in the stability of the galaxy, and we update the latter by including dissipation of energy in gas-rich mergers. Furthermore, we introduce angular momentum losses during cooling and find that an accurate match to the observed correlation between stellar disc scale length and mass at z ~ 0.0 requires that the gas loses 20% of its initial specific angular momentum to the corresponding dark matter halo during the formation of the cold gas disc. We reproduce the observed trends between the stellar mass and specific angular momentum for both disc- and bulge-dominated galaxies, with the former rotating faster than the latter of the same mass. We conclude that a two-component instability recipe provides a morphologically diverse galaxy sample which matches the observed fractional breakdown of galaxies into different morphological types. This recipe also enables us to obtain an excellent fit to the morphology-mass relation and stellar mass function of different galactic types. Finally, we find that energy dissipation during mergers reduces the merger remnant sizes and allows us to match the observed mass-size relation for bulge-dominated systems.

  • 5 authors
·
Oct 11, 2018

Drift surface solver for runaway electron current dominant equilibria during the Current Quench

Runaway electron current generated during the Current Quench phase of tokamak disruptions could result in severe damage to future high performance devices. To control and mitigate such runaway electron current, it is important to accurately describe the runaway electron current dominated equilibrium, based on which further stability analysis could be carried out. In this paper, we derive a Grad-Shafranov-like equation solving for the axisymmetric drift surfaces of the runaway electrons for the simple case that all runaway electron share the same parallel momentum. This new equilibrium equation is then numerically solved with simple rectangular wall with ITER-like and MAST-like geometry parameters. The deviation between the drift surfaces and the flux surfaces is readily obtained, and runaway electrons is found to be well confined even in regions with open field lines. The change of the runaway electron parallel momentum is found to result in a horizontal current center displacement without any changes in the total current or the external field. The runaway current density profile is found to affect the susceptibility of such displacement, with flatter profiles result in more displacement by the same momentum change. With up-down asymmetry in the external poloidal field, such displacement is accompanied by a vertical displacement of runaway electron current. It is found that this effect is more pronounced in smaller, compact device and weaker poloidal field cases. The above results demonstrate the dynamics of current center displacement caused by the momentum space change in the runaway electrons, and pave way for future, more sophisticated runaway current equilibrium theory with more realistic consideration on the runaway electron momentum distribution. This new equilibrium theory also provides foundation for future stability analysis of the runaway electron current.

  • 2 authors
·
Mar 2, 2023

Higgs-Induced Gravitational Waves: the Interplay of Non-Minimal Couplings, Kination and Top Quark Mass

We explore a minimal scenario where the sole Standard-Model Higgs is responsible for reheating the Universe after inflation, produces a significant background of gravitational waves and maintains the full classical stability of the electroweak vacuum. As the Higgs self-coupling runs toward negative values at high energy scales, a non-minimal interaction with curvature during a stiff background expansion era drives the Higgs fluctuations closer to the instability scale. This curvature-induced tachyonic instability leads to an intense production of Higgs particles, accompanied by a stochastic gravitational-wave background. The characteristic features of such signal can be directly correlated to the inflationary scale, the non-minimal coupling parameter and the top quark Yukawa coupling. We distinguish between three possible scenarios: absolute stability with low top quark masses, potential vacuum instability, and absolute stability with new physics above the instability scale. Our findings suggest that the detection of a peaked background of gravitational waves together with its inflationary tail has the potential to unveil the features of the Higgs effective potential at very high energy scales while providing a minimal explanation for the reheating phase and the emergence of the Standard-Model plasma in the early Universe. Unlike other studies in the literature, the generation of gravitational waves in our scenario does not depend on the quantum instability of the Standard Model vacuum.

  • 2 authors
·
Feb 6, 2025

Low-energy Injection and Nonthermal Particle Acceleration in Relativistic Magnetic Turbulence

Relativistic magnetic turbulence has been proposed as a process for producing nonthermal particles in high-energy astrophysics. Particle energization may be contributed by both magnetic reconnection and turbulent fluctuations, but their interplay is poorly understood. It has been suggested that during magnetic reconnection the parallel electric field dominates particle acceleration up to the lower bound of the power-law particle spectrum, but recent studies show that electric fields perpendicular to magnetic field can play an important, if not dominant role. In this study, we carry out 2D fully kinetic particle-in-cell simulations of magnetically dominated decaying turbulence in a relativistic pair plasma. For a fixed magnetization parameter sigma_0=20, we find that the injection energy {varepsilon}_{rm inj} converges with increasing domain size to {varepsilon}_{rm inj}simeq 10m_ec^2. In contrast, the power-law index, the cut-off energy, and the power-law extent increase steadily with domain size. We trace a large number of particles and evaluate the contributions of the work done by the parallel (W_parallel) and perpendicular (W_perp) electric fields during both the injection phase and the post-injection phase. We find that during the injection phase, the W_perp contribution increases with domain size, suggesting that it may eventually dominate injection for a sufficiently large domain. In contrast, both components contribute equally during the post-injection phase, insensitive to the domain size. For high energy ({varepsilon}varepsilon_{rm inj}) particles, W_perp dominates the subsequent energization. These findings may improve our understanding of nonthermal particles and their emissions in astrophysical plasmas.

  • 4 authors
·
Apr 29, 2024

A Physics-Informed, Global-in-Time Neural Particle Method for the Spatially Homogeneous Landau Equation

We propose a physics-informed neural particle method (PINN--PM) for the spatially homogeneous Landau equation. The method adopts a Lagrangian interacting-particle formulation and jointly parameterizes the time-dependent score and the characteristic flow map with neural networks. Instead of advancing particles through explicit time stepping, the Landau dynamics is enforced via a continuous-time residual defined along particle trajectories. This design removes time-discretization error and yields a mesh-free solver that can be queried at arbitrary times without sequential integration. We establish a rigorous stability analysis in an L^2_v framework. The deviation between learned and exact characteristics is controlled by three interpretable sources: (i) score approximation error, (ii) empirical particle approximation error, and (iii) the physics residual of the neural flow. This trajectory estimate propagates to density reconstruction, where we derive an L^2_v error bound for kernel density estimators combining classical bias--variance terms with a trajectory-induced contribution. Using Hyvarinen's identity, we further relate the oracle score-matching gap to the L^2_v score error and show that the empirical loss concentrates at the Monte Carlo rate, yielding computable a posteriori accuracy certificates. Numerical experiments on analytical benchmarks, including the two- and three-dimensional BKW solutions, as well as reference-free configurations, demonstrate stable transport, preservation of macroscopic invariants, and competitive or improved accuracy compared with time-stepping score-based particle and blob methods while using significantly fewer particles.

  • 4 authors
·
Mar 11 1

WADEPre: A Wavelet-based Decomposition Model for Extreme Precipitation Nowcasting with Multi-Scale Learning

The heavy-tailed nature of precipitation intensity impedes precise precipitation nowcasting. Standard models that optimize pixel-wise losses are prone to regression-to-the-mean bias, which blurs extreme values. Existing Fourier-based methods also lack the spatial localization needed to resolve transient convective cells. To overcome these intrinsic limitations, we propose WADEPre, a wavelet-based decomposition model for extreme precipitation that transitions the modeling into the wavelet domain. By leveraging the Discrete Wavelet Transform for explicit decomposition, WADEPre employs a dual-branch architecture: an Approximation Network to model stable, low-frequency advection, isolating deterministic trends from statistical bias, and a spatially localized Detail Network to capture high-frequency stochastic convection, resolving transient singularities and preserving sharp boundaries. A subsequent Refiner module then dynamically reconstructs these decoupled multi-scale components into the final high-fidelity forecast. To address optimization instability, we introduce a multi-scale curriculum learning strategy that progressively shifts supervision from coarse scales to fine-grained details. Extensive experiments on the SEVIR and Shanghai Radar datasets demonstrate that WADEPre achieves state-of-the-art performance, yielding significant improvements in capturing extreme thresholds and maintaining structural fidelity. Our code is available at https://github.com/sonderlau/WADEPre.

  • 7 authors
·
Feb 2

Effective control of two-dimensional Rayleigh--Bénard convection: invariant multi-agent reinforcement learning is all you need

Rayleigh-B\'enard convection (RBC) is a recurrent phenomenon in several industrial and geoscience flows and a well-studied system from a fundamental fluid-mechanics viewpoint. However, controlling RBC, for example by modulating the spatial distribution of the bottom-plate heating in the canonical RBC configuration, remains a challenging topic for classical control-theory methods. In the present work, we apply deep reinforcement learning (DRL) for controlling RBC. We show that effective RBC control can be obtained by leveraging invariant multi-agent reinforcement learning (MARL), which takes advantage of the locality and translational invariance inherent to RBC flows inside wide channels. The MARL framework applied to RBC allows for an increase in the number of control segments without encountering the curse of dimensionality that would result from a naive increase in the DRL action-size dimension. This is made possible by the MARL ability for re-using the knowledge generated in different parts of the RBC domain. We show in a case study that MARL DRL is able to discover an advanced control strategy that destabilizes the spontaneous RBC double-cell pattern, changes the topology of RBC by coalescing adjacent convection cells, and actively controls the resulting coalesced cell to bring it to a new stable configuration. This modified flow configuration results in reduced convective heat transfer, which is beneficial in several industrial processes. Therefore, our work both shows the potential of MARL DRL for controlling large RBC systems, as well as demonstrates the possibility for DRL to discover strategies that move the RBC configuration between different topological configurations, yielding desirable heat-transfer characteristics. These results are useful for both gaining further understanding of the intrinsic properties of RBC, as well as for developing industrial applications.

  • 6 authors
·
Apr 5, 2023

OmniForcing: Unleashing Real-time Joint Audio-Visual Generation

Recent joint audio-visual diffusion models achieve remarkable generation quality but suffer from high latency due to their bidirectional attention dependencies, hindering real-time applications. We propose OmniForcing, the first framework to distill an offline, dual-stream bidirectional diffusion model into a high-fidelity streaming autoregressive generator. However, naively applying causal distillation to such dual-stream architectures triggers severe training instability, due to the extreme temporal asymmetry between modalities and the resulting token sparsity. We address the inherent information density gap by introducing an Asymmetric Block-Causal Alignment with a zero-truncation Global Prefix that prevents multi-modal synchronization drift. The gradient explosion caused by extreme audio token sparsity during the causal shift is further resolved through an Audio Sink Token mechanism equipped with an Identity RoPE constraint. Finally, a Joint Self-Forcing Distillation paradigm enables the model to dynamically self-correct cumulative cross-modal errors from exposure bias during long rollouts. Empowered by a modality-independent rolling KV-cache inference scheme, OmniForcing achieves state-of-the-art streaming generation at sim25 FPS on a single GPU, maintaining multi-modal synchronization and visual quality on par with the bidirectional teacher.Project Page: https://omniforcing.com{https://omniforcing.com}

  • 10 authors
·
Mar 12 4

simple-idealized-1d-nlse: Pseudo-Spectral Solver for the 1D Nonlinear Schrödinger Equation

We present an open-source Python implementation of an idealized high-order pseudo-spectral solver for the one-dimensional nonlinear Schr\"odinger equation (NLSE). The solver combines Fourier spectral spatial discretization with an adaptive eighth-order Dormand-Prince time integration scheme to achieve machine-precision conservation of mass and near-perfect preservation of momentum and energy for smooth solutions. The implementation accurately reproduces fundamental NLSE phenomena including soliton collisions with analytically predicted phase shifts, Akhmediev breather dynamics, and the development of modulation instability from noisy initial conditions. Four canonical test cases validate the numerical scheme: single soliton propagation, two-soliton elastic collision, breather evolution, and noise-seeded modulation instability. The solver employs a 2/3 dealiasing rule with exponential filtering to prevent aliasing errors from the cubic nonlinearity. Statistical analysis using Shannon, R\'enyi, and Tsallis entropies quantifies the spatio-temporal complexity of solutions, while phase space representations reveal the underlying coherence structure. The implementation prioritizes code transparency and educational accessibility over computational performance, providing a valuable pedagogical tool for exploring nonlinear wave dynamics. Complete source code, documentation, and example configurations are freely available, enabling reproducible computational experiments across diverse physical contexts where the NLSE governs wave evolution, including nonlinear optics, Bose-Einstein condensates, and ocean surface waves.

  • 5 authors
·
Sep 6, 2025

Blue large-amplitude pulsators formed from the merger of low-mass white dwarfs

Blue large-amplitude pulsators (BLAPs) are a recently discovered group of hot stars pulsating in radial modes. Their origin needs to be explained, and several scenarios for their formation have already been proposed. We investigate whether BLAPs can originate as the product of a merger of two low-mass white dwarfs (WDs) and estimate how many BLAPs can be formed in this evolutionary channel. We used the MESA code to model the merger of three different double extremely low-mass (DELM) WDs and the subsequent evolution of the merger product. We also performed a population synthesis of Galactic DELM WDs using the COSMIC code. We find that BLAPs can be formed from DELM WDs provided that the total mass of the system ranges between 0.32 and 0.7 M_odot. BLAPs born in this scenario either do not have any thermonuclear fusion at all or show off-centre He burning. The final product evolves to hot subdwarfs and eventually finishes its evolution either as a cooling He WD or a hybrid He/CO WD. The merger products become BLAPs only a few thousand years after coalescence, and it takes them 20 to 70 thousand years to pass the BLAP region. We found the instability of the fundamental radial mode to be in fair agreement with observations, but we also observed instability of the radial first overtone. From the population synthesis, we found that up to a few hundred BLAPs born in this scenario can exist at present in the Galaxy. Given the estimated number of BLAPs formed in the studied DELM WD merger scenario, there is a good chance to observe BLAPs that originated through this scenario. Since strong magnetic fields can be generated during mergers, this scenario could lead to the formation of magnetic BLAPs. This fits well with the discovery of two likely magnetic BLAPs whose pulsations can be explained in terms of the oblique rotator model.

  • 3 authors
·
Sep 30, 2024

First observation of the Josephson-Anderson relation in experiments on hydrodynamic drag

We verify a recent prediction (Eq. 3.50 in G. L. Eyink, Phys. Rev. X 11, 031054 (2021)) for the drag on an object moving through a fluid. In this prediction the velocity field is decomposed into a nonvortical (potential) and vortical contribution, and so is the associated drag force. In the Josephson-Anderson relation the vortical contribution of the drag force follows from the flux of vorticity traversing the streamlines of the corresponding potential flow. The potential component is directly determined by the plate acceleration and its added mass. The Josephson-Anderson relation is derived from the quantum description of superfluids, but remarkably applies to the classical fluid in our experiment. In our experiment a flat plate is accelerated through water using a robotic arm. This geometry is simple enough to allow analytic potential flow streamlines. The monitored plate position shows an oscillatory component of the acceleration, which adds an additional test of the Josephson-Anderson relation. The instantaneous velocity field is measured using particle image velocimetry. It enables us to evaluate Eq. 3.50 from [1] and compare its prediction to the measured drag force. We find excellent agreement, and, most remarkably find that the added mass contribution to the drag force still stands out after the flow has turned vortical. We finally comment on the requirements on the experimental techniques for evaluating the Josephson-Anderson relation.

  • 5 authors
·
Aug 27, 2025

PDE-Refiner: Achieving Accurate Long Rollouts with Neural PDE Solvers

Time-dependent partial differential equations (PDEs) are ubiquitous in science and engineering. Recently, mostly due to the high computational cost of traditional solution techniques, deep neural network based surrogates have gained increased interest. The practical utility of such neural PDE solvers relies on their ability to provide accurate, stable predictions over long time horizons, which is a notoriously hard problem. In this work, we present a large-scale analysis of common temporal rollout strategies, identifying the neglect of non-dominant spatial frequency information, often associated with high frequencies in PDE solutions, as the primary pitfall limiting stable, accurate rollout performance. Based on these insights, we draw inspiration from recent advances in diffusion models to introduce PDE-Refiner; a novel model class that enables more accurate modeling of all frequency components via a multistep refinement process. We validate PDE-Refiner on challenging benchmarks of complex fluid dynamics, demonstrating stable and accurate rollouts that consistently outperform state-of-the-art models, including neural, numerical, and hybrid neural-numerical architectures. We further demonstrate that PDE-Refiner greatly enhances data efficiency, since the denoising objective implicitly induces a novel form of spectral data augmentation. Finally, PDE-Refiner's connection to diffusion models enables an accurate and efficient assessment of the model's predictive uncertainty, allowing us to estimate when the surrogate becomes inaccurate.

  • 5 authors
·
Aug 10, 2023

Lagrangian PINNs: A causality-conforming solution to failure modes of physics-informed neural networks

Physics-informed neural networks (PINNs) leverage neural-networks to find the solutions of partial differential equation (PDE)-constrained optimization problems with initial conditions and boundary conditions as soft constraints. These soft constraints are often considered to be the sources of the complexity in the training phase of PINNs. Here, we demonstrate that the challenge of training (i) persists even when the boundary conditions are strictly enforced, and (ii) is closely related to the Kolmogorov n-width associated with problems demonstrating transport, convection, traveling waves, or moving fronts. Given this realization, we describe the mechanism underlying the training schemes such as those used in eXtended PINNs (XPINN), curriculum regularization, and sequence-to-sequence learning. For an important category of PDEs, i.e., governed by non-linear convection-diffusion equation, we propose reformulating PINNs on a Lagrangian frame of reference, i.e., LPINNs, as a PDE-informed solution. A parallel architecture with two branches is proposed. One branch solves for the state variables on the characteristics, and the second branch solves for the low-dimensional characteristics curves. The proposed architecture conforms to the causality innate to the convection, and leverages the direction of travel of the information in the domain. Finally, we demonstrate that the loss landscapes of LPINNs are less sensitive to the so-called "complexity" of the problems, compared to those in the traditional PINNs in the Eulerian framework.

  • 3 authors
·
May 5, 2022

GyroSwin: 5D Surrogates for Gyrokinetic Plasma Turbulence Simulations

Nuclear fusion plays a pivotal role in the quest for reliable and sustainable energy production. A major roadblock to viable fusion power is understanding plasma turbulence, which significantly impairs plasma confinement, and is vital for next-generation reactor design. Plasma turbulence is governed by the nonlinear gyrokinetic equation, which evolves a 5D distribution function over time. Due to its high computational cost, reduced-order models are often employed in practice to approximate turbulent transport of energy. However, they omit nonlinear effects unique to the full 5D dynamics. To tackle this, we introduce GyroSwin, the first scalable 5D neural surrogate that can model 5D nonlinear gyrokinetic simulations, thereby capturing the physical phenomena neglected by reduced models, while providing accurate estimates of turbulent heat transport.GyroSwin (i) extends hierarchical Vision Transformers to 5D, (ii) introduces cross-attention and integration modules for latent 3Dleftrightarrow5D interactions between electrostatic potential fields and the distribution function, and (iii) performs channelwise mode separation inspired by nonlinear physics. We demonstrate that GyroSwin outperforms widely used reduced numerics on heat flux prediction, captures the turbulent energy cascade, and reduces the cost of fully resolved nonlinear gyrokinetics by three orders of magnitude while remaining physically verifiable. GyroSwin shows promising scaling laws, tested up to one billion parameters, paving the way for scalable neural surrogates for gyrokinetic simulations of plasma turbulence.

An efficient Asymptotic-Preserving scheme for the Boltzmann mixture with disparate mass

In this paper, we develop and implement an efficient asymptotic-preserving (AP) scheme to solve the gas mixture of Boltzmann equations under the disparate mass scaling relevant to the so-called "epochal relaxation" phenomenon. The disparity in molecular masses, ranging across several orders of magnitude, leads to significant challenges in both the evaluation of collision operators and the designing of time-stepping schemes to capture the multi-scale nature of the dynamics. A direct implementation of the spectral method faces prohibitive computational costs as the mass ratio increases due to the need to resolve vastly different thermal velocities. Unlike [I. M. Gamba, S. Jin, and L. Liu, Commun. Math. Sci., 17 (2019), pp. 1257-1289], we propose an alternative approach based on proper truncation of asymptotic expansions of the collision operators, which significantly reduces the computational complexity and works well for small varepsilon. By incorporating the separation of three time scales in the model's relaxation process [P. Degond and B. Lucquin-Desreux, Math. Models Methods Appl. Sci., 6 (1996), pp. 405-436], we design an AP scheme that captures the specific dynamics of the disparate mass model while maintaining computational efficiency. Numerical experiments demonstrate the effectiveness of the proposed scheme in handling large mass ratios of heavy and light species, as well as capturing the epochal relaxation phenomenon.

  • 3 authors
·
Nov 20, 2024

Observing the Rosensweig instability of a quantum ferrofluid

Ferrofluids show unusual hydrodynamic effects due to the magnetic nature of their constituents. For increasing magnetization a classical ferrofluid undergoes a Rosensweig instability and creates self-organized ordered surface structures or droplet crystals. A Bose-Einstein condensate with strong dipolar interactions is a quantum ferrofluid that also shows superfluidity. The field of dipolar quantum gases is motivated by the search for new phases that break continuous symmetries. The simultaneous breaking of continuous symmetries like the phase invariance for the superfluid state and the translational symmetry for a crystal provides the basis of novel states of matter. However, interaction-induced crystallization in a superfluid has not been observed. Here we use in situ imaging to directly observe the spontaneous transition from an unstructured superfluid to an ordered arrangement of droplets in an atomic dysprosium Bose-Einstein condensate. By utilizing a Feshbach resonance to control the interparticle interactions, we induce a finite-wavelength instability and observe discrete droplets in a triangular structure, growing with increasing atom number. We find that these states are surprisingly long-lived and measure a hysteretic behaviour, which is typical for a crystallization process and in close analogy to the Rosensweig instability. Our system can show both superfluidity and, as shown here, spontaneous translational symmetry breaking. The presented observations do not probe superfluidity in the structured states, but if the droplets establish a common phase via weak links, this system is a very good candidate for a supersolid ground state.

  • 7 authors
·
Aug 20, 2015

Multidimensional half-moment multigroup radiative transfer. Improving moment-based thermal models of circumstellar disks

Common moment-based radiative transfer methods, such as flux-limited diffusion (FLD) and the M1 closure, suffer from artificial interactions between crossing beams. In protoplanetary disks, this leads to an overestimation of the midplane temperature due to the merging of inward and outward vertical fluxes. Methods that avoid these artifacts typically require angular discretization, which can be computationally expensive. In the spirit of the two-stream approximation, we introduced a half-moment (HM) closure that integrates the radiative intensity over hemispheres, thereby suppressing beam interactions along a fixed spatial direction. We derived a multidimensional HM closure via entropy maximization and replaced this closure with an approximate expression that closely matches it, coinciding with it in the diffusion and free-streaming regimes while remaining expressible through simple operations. We implemented HM and M1 closures via implicit-explicit schemes, including multiple frequency groups. We tested these methods in numerical benchmarks such as computing the temperature in an irradiated disk around a T Tauri star, comparing our results with Monte Carlo (MC) radiative transfer simulations. The HM closure correctly reproduces the diffusion limit and prevents crossing flux interactions in a chosen spatial direction. In disk simulations, our multigroup HM method closely matches midplane temperature distributions obtained with classical MC methods. While the M1 closure produces midplane temperatures 44% higher than MC with one frequency group and 21% higher with 22 groups, HM reduces this discrepancy to 6% with 22 groups. Even with just three groups, HM significantly outperforms M1, with maximum departures of 8% compared to M1's 23%. Our results show that combining HM with a multigroup treatment yields more realistic disk temperatures than M1, particularly in optically thick regions.

  • 5 authors
·
Apr 18, 2025

Channels of Stellar-mass Black Hole Formation

On the basis of a large collection of detailed 3D core-collapse supernova simulations carried to late times, we identify four channels of stellar mass black hole formation. Our examples for Channel 1 involve the formation of lower-gap and above black holes in energetic asymmetric supernova explosions. Our Channel 2 example involves a modest supernova explosion that may leave behind a lower-gap to sim10 M_{odot} black hole. The latter may not be easily distinguishable from ``standard" supernovae that birth neutron stars. Our Channel 3 example experiences an aborted core-collapse explosion, more often in the context of a low-metallicity progenitor, whose residue is a black hole with a mass perhaps up to sim40 M_{odot}. The latter may be accompanied by a pulsational-pair instability supernova (PPISN). Channel 4 is the only quiescent or ``silent" scenario for which perhaps sim5 to 15 M_{odot} black holes are left. Where appropriate, we estimate ^{56}Ni yields, explosion energies, approximate recoil speeds, and residual black hole masses. The progenitor mass density and binding energy profiles at collapse influence the outcome in a systematic way. The statistics and prevalence of these various channels depend not only on still evolving supernova theory, but on remaining issues with the theory of massive star evolution, binary interaction, wind mass loss, metallicity, and the nuclear equation of state. Importantly, we suggest, but have not proven, that the silent channel for black hole formation may not be the dominant formation modality.

  • 3 authors
·
Dec 10, 2024

JAWS: Enhancing Long-term Rollout of Neural Operators via Spatially-Adaptive Jacobian Regularization

Data-driven surrogate models improve the efficiency of simulating continuous dynamical systems, yet their autoregressive rollouts are often limited by instability and spectral blow-up. While global regularization techniques can enforce contractive dynamics, they uniformly damp high-frequency features, introducing a contraction-dissipation dilemma. Furthermore, long-horizon trajectory optimization methods that explicitly correct drift are bottlenecked by memory constraints. In this work, we propose Jacobian-Adaptive Weighting for Stability (JAWS), a probabilistic regularization strategy designed to mitigate these limitations. By framing operator learning as Maximum A Posteriori (MAP) estimation with spatially heteroscedastic uncertainty, JAWS dynamically modulates the regularization strength based on local physical complexity. This allows the model to enforce contraction in smooth regions to suppress noise, while relaxing constraints near singular features to preserve gradients, effectively realizing a behavior similar to numerical shock-capturing schemes. Experiments demonstrate that this spatially-adaptive prior serves as an effective spectral pre-conditioner, which reduces the base operator's burden of handling high-frequency instabilities. This reduction enables memory-efficient, short-horizon trajectory optimization to match or exceed the long-term accuracy of long-horizon baselines. Evaluated on the 1D viscous Burgers' equation, our hybrid approach improves long-term stability, shock fidelity, and out-of-distribution generalization while reducing training computational costs.

  • 2 authors
·
Mar 4

Fluctuations and correlations in chemical reaction kinetics and population dynamics

This chapter provides a pedagogical introduction and overview of spatial and temporal correlation and fluctuation effects resulting from the fundamentally stochastic kinetics underlying chemical reactions and the dynamics of populations or epidemics. After reviewing the assumptions and mean-field type approximations involved in the construction of chemical rate equations for uniform reactant densities, we first discuss spatial clustering in birth-death systems, where non-linearities are introduced through either density-limiting pair reactions, or equivalently via local imposition of finite carrying capacities. The competition of offspring production, death, and non-linear inhibition induces a population extinction threshold, which represents a non-equilibrium phase transition that separates active from absorbing states. This continuous transition is characterized by the universal scaling exponents of critical directed percolation clusters. Next we focus on the emergence of depletion zones in single-species annihilation processes and spatial population segregation with the associated reaction fronts in two-species pair annihilation. These strong (anti-)correlation effects are dynamically generated by the underlying stochastic kinetics. Finally, we address noise-induced and fluctuation-stabilized spatio-temporal patterns in basic predator-prey systems, exemplified by spreading activity fronts in the two-species Lotka-Volterra model as well as spiral structures in the May-Leonard variant of cyclically competing three-species systems akin to rock-paper-scissors games.

  • 1 authors
·
Jul 3, 2018

sangkuriang: A pseudo-spectral Python library for Korteweg-de Vries soliton simulation

The Korteweg-de Vries (KdV) equation serves as a foundational model in nonlinear wave physics, describing the balance between dispersive spreading and nonlinear steepening that gives rise to solitons. This article introduces sangkuriang, an open-source Python library for solving this equation using Fourier pseudo-spectral spatial discretization coupled with adaptive high-order time integration. The implementation leverages just-in-time (JIT) compilation for computational efficiency while maintaining accessibility for instructional purposes. Validation encompasses progressively complex scenarios including isolated soliton propagation, symmetric two-wave configurations, overtaking collisions between waves of differing amplitudes, and three-body interactions. Conservation of the classical invariants is monitored throughout, with deviations remaining small across all test cases. Measured soliton velocities conform closely to theoretical predictions based on the amplitude-velocity relationship characteristic of integrable systems. Complementary diagnostics drawn from information theory and recurrence analysis confirm that computed solutions preserve the regular phase-space structure expected for completely integrable dynamics. The solver outputs data in standard scientific formats compatible with common analysis tools and generates visualizations of spatiotemporal wave evolution. By combining numerical accuracy with practical accessibility on modest computational resources, sangkuriang offers a platform suitable for both classroom demonstrations of nonlinear wave phenomena and exploratory research into soliton dynamics.

  • 4 authors
·
Jan 17 2

Forecasting Thermoacoustic Instabilities in Liquid Propellant Rocket Engines Using Multimodal Bayesian Deep Learning

The 100 MW cryogenic liquid oxygen/hydrogen multi-injector combustor BKD operated by the DLR Institute of Space Propulsion is a research platform that allows the study of thermoacoustic instabilities under realistic conditions, representative of small upper stage rocket engines. We use data from BKD experimental campaigns in which the static chamber pressure and fuel-oxidizer ratio are varied such that the first tangential mode of the combustor is excited under some conditions. We train an autoregressive Bayesian neural network model to forecast the amplitude of the dynamic pressure time series, inputting multiple sensor measurements (injector pressure/ temperature measurements, static chamber pressure, high-frequency dynamic pressure measurements, high-frequency OH* chemiluminescence measurements) and future flow rate control signals. The Bayesian nature of our algorithms allows us to work with a dataset whose size is restricted by the expense of each experimental run, without making overconfident extrapolations. We find that the networks are able to accurately forecast the evolution of the pressure amplitude and anticipate instability events on unseen experimental runs 500 milliseconds in advance. We compare the predictive accuracy of multiple models using different combinations of sensor inputs. We find that the high-frequency dynamic pressure signal is particularly informative. We also use the technique of integrated gradients to interpret the influence of different sensor inputs on the model prediction. The negative log-likelihood of data points in the test dataset indicates that predictive uncertainties are well-characterized by our Bayesian model and simulating a sensor failure event results as expected in a dramatic increase in the epistemic component of the uncertainty.

  • 5 authors
·
Jul 1, 2021

Fully Compressible Magnetohydrodynamic Simulations of Solar Convection Zones with CHORUS++

The objective of this study is to develop a fully compressible magnetohydrodynamic solver for fast simulations of the global dynamo of the Sun using unstructured grids and GPUs. Accurate modeling of the Sun's convective layers is vital to predicting the Sun's behavior, including the solar dynamo and sunspot cycles. Currently, there are many efficient codes capable of conducting these large simulations; however, many assume an anealastic density distribution. The anelastic assumption is capable of producing accurate results for low mach numbers; however, it fails in regions with a higher mach number and a fully compressible flow must be considered. To avoid these issues, Wang et al. [1] created a Compressible High-ORder Unstructured Spectral difference (CHORUS) code for simulating fluid dynamics inside stars and planets. CHORUS++ augmented the CHORUS code to adopt a higher degree of polynomials by using cubed-sphere meshing and transfinite mapping to perform simulations on unstructured grids [2]. Recently, CHORUS++ was further developed for parallel magnetohydrodynamic (MHD) solutions on GPUs at Clarkson University. In this study the solar benchmark problems presented by Chen et al. [2] are extended to unsteady solar dynamo problems, with two different density scale heights. The CHORUS-MHD code is further accelerated by multiple GPUs and used to successfully solve these solar dynamo benchmark problems. [1] Wang, J., Liang, C., and Miesch, M. S., "A Compressible High-Order Unstructured Spectral Difference Code for Stratified Convection in Rotating Spherical Shells," Journal of Computational Physics, Vol. 290, 2015, pp. 90-111. [2] Chen, K., Liang, C., and Wan, M., "Arbitrarily high-order accurate simulations of compressible rotationally constrained convection using a transfinite mapping on cubed-sphere grids," Physics of Fluids, Vol. 35, 2023, p. 086120.

  • 2 authors
·
Feb 24, 2025

StableWorld: Towards Stable and Consistent Long Interactive Video Generation

In this paper, we explore the overlooked challenge of stability and temporal consistency in interactive video generation, which synthesizes dynamic and controllable video worlds through interactive behaviors such as camera movements and text prompts. Despite remarkable progress in world modeling, current methods still suffer from severe instability and temporal degradation, often leading to spatial drift and scene collapse during long-horizon interactions. To better understand this issue, we initially investigate the underlying causes of instability and identify that the major source of error accumulation originates from the same scene, where generated frames gradually deviate from the initial clean state and propagate errors to subsequent frames. Building upon this observation, we propose a simple yet effective method, StableWorld, a Dynamic Frame Eviction Mechanism. By continuously filtering out degraded frames while retaining geometrically consistent ones, StableWorld effectively prevents cumulative drift at its source, leading to more stable and temporal consistency of interactive generation. Promising results on multiple interactive video models, \eg, Matrix-Game, Open-Oasis, and Hunyuan-GameCraft, demonstrate that StableWorld is model-agnostic and can be applied to different interactive video generation frameworks to substantially improve stability, temporal consistency, and generalization across diverse interactive scenarios.

  • 9 authors
·
Jan 21

SineNet: Learning Temporal Dynamics in Time-Dependent Partial Differential Equations

We consider using deep neural networks to solve time-dependent partial differential equations (PDEs), where multi-scale processing is crucial for modeling complex, time-evolving dynamics. While the U-Net architecture with skip connections is commonly used by prior studies to enable multi-scale processing, our analysis shows that the need for features to evolve across layers results in temporally misaligned features in skip connections, which limits the model's performance. To address this limitation, we propose SineNet, consisting of multiple sequentially connected U-shaped network blocks, referred to as waves. In SineNet, high-resolution features are evolved progressively through multiple stages, thereby reducing the amount of misalignment within each stage. We furthermore analyze the role of skip connections in enabling both parallel and sequential processing of multi-scale information. Our method is rigorously tested on multiple PDE datasets, including the Navier-Stokes equations and shallow water equations, showcasing the advantages of our proposed approach over conventional U-Nets with a comparable parameter budget. We further demonstrate that increasing the number of waves in SineNet while maintaining the same number of parameters leads to a monotonically improved performance. The results highlight the effectiveness of SineNet and the potential of our approach in advancing the state-of-the-art in neural PDE solver design. Our code is available as part of AIRS (https://github.com/divelab/AIRS).

  • 7 authors
·
Mar 28, 2024

Respecting causality is all you need for training physics-informed neural networks

While the popularity of physics-informed neural networks (PINNs) is steadily rising, to this date PINNs have not been successful in simulating dynamical systems whose solution exhibits multi-scale, chaotic or turbulent behavior. In this work we attribute this shortcoming to the inability of existing PINNs formulations to respect the spatio-temporal causal structure that is inherent to the evolution of physical systems. We argue that this is a fundamental limitation and a key source of error that can ultimately steer PINN models to converge towards erroneous solutions. We address this pathology by proposing a simple re-formulation of PINNs loss functions that can explicitly account for physical causality during model training. We demonstrate that this simple modification alone is enough to introduce significant accuracy improvements, as well as a practical quantitative mechanism for assessing the convergence of a PINNs model. We provide state-of-the-art numerical results across a series of benchmarks for which existing PINNs formulations fail, including the chaotic Lorenz system, the Kuramoto-Sivashinsky equation in the chaotic regime, and the Navier-Stokes equations in the turbulent regime. To the best of our knowledge, this is the first time that PINNs have been successful in simulating such systems, introducing new opportunities for their applicability to problems of industrial complexity.

  • 3 authors
·
Mar 14, 2022

Soap Film Drainage Under Tunable Gravity Using a Centrifugal Thin Film Balance

Surface bubbles are an abundant source of aerosols, with important implications for climate processes. In this context, we investigate the stability and thinning dynamics of soap films under effective gravity fields. Experiments are performed using a centrifugal thin-film balance capable of generating accelerations from 0.2 up to 100 times standard gravity, combined with thin-film interferometry to obtain time-resolved thickness maps. Across all experimental conditions, the drainage dynamics are shown to be governed by capillary suction and marginal regeneration-a mechanism in which thick regions of the film are continuously replaced by thin film elements (TFEs) formed at the meniscus. We consistently recover a thickness ratio of 0.8 - 0.9 between the TFEs and the adjacent film, in agreement with previous observations under standard gravity. The measured thinning rates also follow the predicted scaling laws. We identified that gravity has three distinct effects: (i) it induces a strong stretching of the initial film, extending well beyond the linear-elastic regime; (ii) it controls the meniscus size, and thereby the amplitude of the capillary suction and the drainage rate; and (iii) it reveals an inertia-to-viscous transition in the motion of TFEs within the film. These results are supported by theoretical modeling and highlight the robustness of marginal regeneration and capillary-driven drainage under extreme gravity conditions.

  • 6 authors
·
Nov 11, 2025

PhysicsFormer: An Efficient and Fast Attention-Based Physics Informed Neural Network for Solving Incompressible Navier Stokes Equations

Traditional experimental and numerical approaches for fluid dynamics problems often suffer from high computational cost, mesh sensitivity, and limited capability in capturing complex physical behaviors. Moreover, conventional physics-informed neural networks (PINNs) frequently struggle in chaotic and highly unsteady flow regimes. In this work, we propose PhysicsFormer, a fast and efficient transformer-based physics-informed framework that incorporates multi-head encoder-decoder cross-attention. Unlike multilayer perceptron-based PINNs, PhysicsFormer operates on sequential representations constructed from spatio-temporal data, enabling effective learning of long-range temporal dependencies and improved propagation of initial condition information. A data-embedding strategy is employed to convert spatio-temporal points into pseudo-sequences, while a dynamics-weighted loss function replaces the standard PINNs formulation. Owing to its parallel learning structure, PhysicsFormer demonstrates superior computational efficiency compared to existing transformer-based approaches. The framework is validated on Burgers' equation and flow reconstruction governed by the Navier-Stokes equations, achieving mean squared errors on the order of 10^{-6}. In addition, an inverse problem involving parameter identification in the two-dimensional incompressible Navier-Stokes equations is investigated. For clean data, PhysicsFormer achieves zero identification error for both λ_1 and λ_2; under 1% Gaussian noise, the errors are 0.07% for λ_1 and 0% for λ_2. These results demonstrate that PhysicsFormer provides a reliable and computationally efficient surrogate modeling framework for time-dependent fluid flow problems.

  • 3 authors
·
Jan 7

Solving Navier-Stokes Equations Using Data-free Physics-Informed Neural Networks With Hard Boundary Conditions

In recent years, Physics-Informed Neural Networks (PINNs) have emerged as a powerful and robust framework for solving nonlinear differential equations across a wide range of scientific and engineering disciplines, including biology, geophysics, astrophysics and fluid dynamics. In the PINN framework, the governing partial differential equations, along with initial and boundary conditions, are encoded directly into the loss function, enabling the network to learn solutions that are consistent with the underlying physics. In this work, we employ the PINN framework to solve the dimensionless Navier-Stokes equations for three two-dimensional incompressible, steady, laminar flow problems without using any labeled data. The boundary and initial conditions are enforced in a hard manner, ensuring they are satisfied exactly rather than penalized during training. We validate the PINN predicted velocity profiles, drag coefficients and pressure profiles against the conventional computational fluid dynamics (CFD) simulations for moderate to high values of Reynolds number (Re). It is observed that the PINN predictions show good agreement with the CFD results at lower Re. We also extend our analysis to a transient condition and find that our method is equally capable of simulating complex time-dependent flow dynamics. To quantitatively assess the accuracy, we compute the L_2 normalized error, which lies in the range O(10^{-4}) - O(10^{-1}) for our chosen case studies.

  • 4 authors
·
Nov 18, 2025

A Neural PDE Solver with Temporal Stencil Modeling

Numerical simulation of non-linear partial differential equations plays a crucial role in modeling physical science and engineering phenomena, such as weather, climate, and aerodynamics. Recent Machine Learning (ML) models trained on low-resolution spatio-temporal signals have shown new promises in capturing important dynamics in high-resolution signals, under the condition that the models can effectively recover the missing details. However, this study shows that significant information is often lost in the low-resolution down-sampled features. To address such issues, we propose a new approach, namely Temporal Stencil Modeling (TSM), which combines the strengths of advanced time-series sequence modeling (with the HiPPO features) and state-of-the-art neural PDE solvers (with learnable stencil modeling). TSM aims to recover the lost information from the PDE trajectories and can be regarded as a temporal generalization of classic finite volume methods such as WENO. Our experimental results show that TSM achieves the new state-of-the-art simulation accuracy for 2-D incompressible Navier-Stokes turbulent flows: it significantly outperforms the previously reported best results by 19.9% in terms of the highly-correlated duration time and reduces the inference latency into 80%. We also show a strong generalization ability of the proposed method to various out-of-distribution turbulent flow settings. Our code is available at "https://github.com/Edward-Sun/TSM-PDE".

  • 3 authors
·
Feb 16, 2023